Daily Papers

Diffusion-based vision-language-action (VLA) models cascade pretrained vision-language models (VLMs) with diffusion action experts, but typically restrict the VLM to providing static conditioning. This separation limits how much pretrained perception and reasoning can guide action generation, especially in out-of-distribution settings. We introduce JADE, a Joint Action DEnoiser that enables the VLM and action expert to jointly refine actions. Our key insight is that structured action latents allow the VLM to read the current noisy action together with visual observations and language instructions. At every denoising step, the VLM contextualizes the noisy action and guides the action expert through gated cross-attention, so that its guidance evolves with the action being generated. We further supervise the VLM to recover clean action latents from noisy ones, which gives it a direct action-learning signal and couples perception with control. Additionally, joint denoising enables JADE to generate actions with fewer sampling steps, helping offset the additional cost of VLM participation. An adaptive step-size schedule further balances task performance and inference latency. On RoboDojo, JADE achieves an average success rate of 12.67%, the highest among the evaluated π_{0.5}-based methods, and is competitive with recent VLA and WAM foundation models pretrained at scale. It also improves performance on RoboTwin 2.0 and raises the average success rate across four real-world bimanual tasks by 20.8 percentage points compared with π_{0.5}.

Diffusion and flow models generate a sample over iterative steps, each a full pass through a large network, and that pass dominates generation cost. Training-free caching accelerates them by reusing activations from recent evaluations instead of recomputing them. Dynamic caching methods decide when to refresh by accumulating a cheap probe of the network input into a staleness signal and spending a fresh evaluation once it crosses a threshold. They perform hard caching: the signal is a binary switch between refresh and reuse, and every step, fresh or cached, advances by the prescribed step size. We observe that the signal carries much more than this switch. How far it sits below the threshold, its headroom, predicts the error induced by reuse. We propose SoftCache, which performs soft caching: instead of a binary switch, the headroom sets how far each cached step goes. Where the headroom is large, the sampler jumps past several scheduled nodes, and as a refresh nears, its steps shrink back toward the original step. These adaptive jumps may land between the scheduled nodes, taking the sampler off its fixed grid. SoftCache requires no training and adds no per-backbone settings: on FLUX for images and on HunyuanVideo and Wan2.1 for video, at speedups from 3.5times to 6.9times, it is ahead of every baseline on all four fidelity metrics.

Learning rate schedules are typically fixed before training begins, yet when fine-tuning large language models with low-rank adapters (LoRA), the appropriate scale varies substantially with the model, task, and adapter configuration. Practitioners re-tune a schedule for every new problem, yet a tuned schedule still cannot react to the training dynamics it encounters. We instead amortize learning rate selection across LoRA fine-tuning problems. We leave the base optimizer, Muon, untouched, so that its normalized update fixes the direction, and meta-learn only the global step size. Our method MuPACE is a small recurrent policy, meta-trained across a distribution of fine-tuning runs, that conditions on the observed trajectory and emits bounded adjustments to an interpretable analytic schedule. On 64 fine-tuning problems, MuPACE outperforms standard fixed schedules at a strong shared default on 64-78% of problems and is on par with the same schedules with per-task tuned peaks. Meta-trained only on models with up to 16 layers, MuPACE transfers one-shot to unseen tasks on models as deep as 64 layers, such as Qwen3-32B and Qwen3.8-27B, where a single run remains competitive with swept schedules.

Sharpness-Aware Minimization (SAM) has established itself as a powerful and widely adopted optimizer for training machine learning models. By explicitly minimizing the sharpness of the loss landscape, SAM often improves generalization while delivering strong empirical performance. However, SAM and its variants, like most training algorithms, are sensitive to the choice of learning rate, which is typically selected through extensive hyperparameter tuning or predefined schedulers. In this work, motivated by recent advances on the effectiveness of stochastic Polyak step sizes for Stochastic Gradient Descent (SGD), we derive Polyak schedulers tailored to SAM-style updates, yielding novel adaptive algorithms in both deterministic and stochastic settings. In the smooth setting, we prove linear convergence for strongly convex objectives and an O(1/T) convergence rate for convex objectives in the deterministic case. In the stochastic setting, we establish analogous convergence guarantees up to a neighborhood of the optimum. Numerical experiments demonstrate that the proposed Polyak schedulers achieve performance comparable to or better than carefully tuned SAM baselines, while substantially reducing the need for learning-rate tuning.

Recurrent reasoning models have attracted growing attention for scaling test-time computation, typically by iteratively refining latent states with shared parameters. However, these models apply each learned update with a fixed unit scale, which can be conservative when updates make persistent progress and overly aggressive when they fluctuate, limiting the benefit of additional loops. To understand how the scale should vary along the trajectory, we first analyze the sensitivity of terminal loss to recurrent update scale. We show that its temporal average admits an exact decomposition into persistent-progress and centered-fluctuation contributions. Based on this, we introduce the Trajectory Adaptive Progress-Fluctuation Scheduler (TAPS), which tracks their balance across recurrent updates and adapts the step size online. Theoretically, we establish sufficient conditions under which TAPS reduces expected terminal loss and reaches a target quality in fewer recurrent loops. Empirically, we show that TAPS improves terminal accuracy across structured reasoning tasks without retraining. By further incorporating the progress-fluctuation principle into training, TAPS yields additional accuracy gains with up to 1.56 times wall-clock speedup at matched baseline accuracy. The broad applicability of TAPS is supported by its effectiveness across diverse recurrent architectures and inference strategies. Together, these results establish update scale as complementary control axis of recurrent inference alongside architecture and depth.

Learning rate schedules used in practice bear little resemblance to those recommended by theory. We close much of this theory/practice gap, and as a consequence are able to derive new problem-adaptive learning rate schedules. Our key technical contribution is a refined analysis of learning rate schedules for a wide class of optimization algorithms (including SGD). In contrast to most prior works that study the convergence of the average iterate, we study the last iterate, which is what most people use in practice. When considering only worst-case analysis, our theory predicts that the best choice is the linear decay schedule: a popular choice in practice that sets the stepsize proportionally to 1 - t/T, where t is the current iteration and T is the total number of steps. To go beyond this worst-case analysis, we use the observed gradient norms to derive schedules refined for any particular task. These refined schedules exhibit learning rate warm-up and rapid learning rate annealing near the end of training. Ours is the first systematic approach to automatically yield both of these properties. We perform the most comprehensive evaluation of learning rate schedules to date, evaluating across 10 diverse deep learning problems, a series of LLMs, and a suite of logistic regression problems. We validate that overall, the linear-decay schedule matches or outperforms all commonly used default schedules including cosine annealing, and that our schedule refinement method gives further improvements.

In machine learning applications, it is well known that carefully designed learning rate (step size) schedules can significantly improve the convergence of commonly used first-order optimization algorithms. Therefore how to set step size adaptively becomes an important research question. A popular and effective method is the Polyak step size, which sets step size adaptively for gradient descent or stochastic gradient descent without the need to estimate the smoothness parameter of the objective function. However, there has not been a principled way to generalize the Polyak step size for algorithms with momentum accelerations. This paper presents a general framework to set the learning rate adaptively for first-order optimization methods with momentum, motivated by the derivation of Polyak step size. It is shown that the resulting methods are much less sensitive to the choice of momentum parameter and may avoid the oscillation of the heavy-ball method on ill-conditioned problems. These adaptive step sizes are further extended to the stochastic settings, which are attractive choices for stochastic gradient descent with momentum. Our methods are demonstrated to be more effective for stochastic gradient methods than prior adaptive step size algorithms in large-scale machine learning tasks.

We study the role of batch size in stochastic conditional gradient methods under a μ-Kurdyka-Łojasiewicz (μ-KL) condition. Focusing on momentum-based stochastic conditional gradient algorithms (e.g., Scion), we derive a new analysis that explicitly captures the interaction between stepsize, batch size, and stochastic noise. Our study reveals a regime-dependent behavior: increasing the batch size initially improves optimization accuracy but, beyond a critical threshold, the benefits saturate and can eventually degrade performance under a fixed token budget. Notably, the theory predicts the magnitude of the optimal stepsize and aligns well with empirical practices observed in large-scale training. Leveraging these insights, we derive principled guidelines for selecting the batch size and stepsize, and propose an adaptive strategy that increases batch size and sequence length during training while preserving convergence guarantees. Experiments on NanoGPT are consistent with the theoretical predictions and illustrate the emergence of the predicted scaling regimes. Overall, our results provide a theoretical framework for understanding batch size scaling in stochastic conditional gradient methods and offer guidance for designing efficient training schedules in large-scale optimization.

This paper investigates the global convergence of stepsized Newton methods for convex functions. We propose several simple stepsize schedules with fast global convergence guarantees, up to O (k^{-3}), nearly matching lower complexity bounds Omega (k^{-3.5}) of second-order methods. For cases with multiple plausible smoothness parameterizations or an unknown smoothness constant, we introduce a stepsize backtracking procedure that ensures convergence as if the optimal smoothness parameters were known.

Scheduling precedence-constrained tasks under shared renewable resources is central to modern computing platforms. The Resource Investment Problem (RIP) models this setting by minimizing the cost of provisioned renewable resources under precedence and timing constraints. Exact mixed-integer programming and constraint programming become impractically slow on large instances, and dynamic updates require schedule revisions under tight latency budgets. We present iScheduler, a reinforcement-learning-driven iterative scheduling framework that formulates RIP solving as a Markov decision process over decomposed subproblems and constructs schedules through sequential process selection. The framework accelerates optimization and supports reconfiguration by reusing unchanged process schedules and rescheduling only affected processes. We also release L-RIPLIB, an industrial-scale benchmark derived from cloud-platform workloads with 1,000 instances of 2,500-10,000 tasks. Experiments show that iScheduler attains competitive resource costs while reducing time to feasibility by up to 43times against strong commercial baselines.

This study presents a novel computer system performance optimization and adaptive workload management scheduling algorithm based on Q-learning. In modern computing environments, characterized by increasing data volumes, task complexity, and dynamic workloads, traditional static scheduling methods such as Round-Robin and Priority Scheduling fail to meet the demands of efficient resource allocation and real-time adaptability. By contrast, Q-learning, a reinforcement learning algorithm, continuously learns from system state changes, enabling dynamic scheduling and resource optimization. Through extensive experiments, the superiority of the proposed approach is demonstrated in both task completion time and resource utilization, outperforming traditional and dynamic resource allocation (DRA) algorithms. These findings are critical as they highlight the potential of intelligent scheduling algorithms based on reinforcement learning to address the growing complexity and unpredictability of computing environments. This research provides a foundation for the integration of AI-driven adaptive scheduling in future large-scale systems, offering a scalable, intelligent solution to enhance system performance, reduce operating costs, and support sustainable energy consumption. The broad applicability of this approach makes it a promising candidate for next-generation computing frameworks, such as edge computing, cloud computing, and the Internet of Things.

Large reasoning models improve with more test-time computation, but often overthink, producing unnecessarily long chains-of-thought that raise cost without improving accuracy. Prior reinforcement learning approaches typically rely on a single outcome reward with trajectory-level length penalties, which cannot distinguish essential from redundant reasoning steps and therefore yield blunt compression. Although recent work incorporates step-level signals, such as offline pruning, supervised data construction, or verifier-based intermediate rewards, reasoning length is rarely treated as an explicit step-level optimization objective during RL. We propose Step-wise Adaptive Penalization (SWAP), a fine-grained framework that allocates length reduction across steps based on intrinsic contribution. We estimate step importance from the model's on-policy log-probability improvement toward the correct answer, then treat excess length as a penalty mass redistributed to penalize low-importance steps more heavily while preserving high-importance reasoning. We optimize with a unified outcome-process advantage within group-relative policy optimization. Extensive experiments demonstrate that SWAP reduces reasoning length by 64.3% on average while improving accuracy by 5.7% relative to the base model.

Policy gradient is a widely utilized and foundational algorithm in the field of reinforcement learning (RL). Renowned for its convergence guarantees and stability compared to other RL algorithms, its practical application is often hindered by sensitivity to hyper-parameters, particularly the step-size. In this paper, we introduce the integration of the Polyak step-size in RL, which automatically adjusts the step-size without prior knowledge. To adapt this method to RL settings, we address several issues, including unknown f* in the Polyak step-size. Additionally, we showcase the performance of the Polyak step-size in RL through experiments, demonstrating faster convergence and the attainment of more stable policies.

Performing tasks on the web presents fundamental challenges to large language models (LLMs), including combinatorially large open-world tasks and variations across web interfaces. Simply specifying a large prompt to handle all possible behaviors and states is extremely complex, and results in behavior leaks between unrelated behaviors. Decomposition to distinct policies can address this challenge, but requires carefully handing off control between policies. We propose Stacked LLM Policies for Web Actions (SteP), an approach to dynamically compose policies to solve a diverse set of web tasks. SteP defines a Markov Decision Process where the state is a stack of policies representing the control state, i.e., the chain of policy calls. Unlike traditional methods that are restricted to static hierarchies, SteP enables dynamic control that adapts to the complexity of the task. We evaluate SteP against multiple baselines and web environments including WebArena, MiniWoB++, and a CRM. On WebArena, SteP improves (14.9\% to 33.5\%) over SOTA that use GPT-4 policies, while on MiniWob++, SteP is competitive with prior works while using significantly less data. Our code and data are available at https://asappresearch.github.io/webagents-step.

We introduce two complementary techniques for efficient adaptive optimization that reduce memory requirements while accelerating training of large-scale neural networks. The first technique, Subset-Norm adaptive step size, generalizes AdaGrad-Norm and AdaGrad(-Coordinate) by reducing the second moment term's memory footprint from O(d) to O(d) through step-size sharing, where d is the model size. For non-convex smooth objectives under coordinate-wise sub-gaussian gradient noise, we prove a noise-adapted high-probability convergence guarantee showing improved dimensional dependence over existing methods. Our second technique, Subspace-Momentum, reduces the momentum state's memory footprint by operating in a low-dimensional subspace while applying standard SGD in the orthogonal complement. We establish high-probability convergence rates under similar relaxed assumptions. Empirical evaluation on LLaMA models from 60M to 1B parameters demonstrates the effectiveness of our methods, where combining subset-norm with subspace-momentum achieves Adam's validation perplexity in approximately half the training tokens (6.8B vs 13.1B) while using only 20% of the Adam's optimizer-states memory footprint and requiring minimal additional hyperparameter tuning.

Generalist manipulation policies increasingly take the form of action-chunking flow policies built on large pretrained backbones. Such chunks run open-loop, so the policy cannot react to sensory input arriving mid-execution, sacrificing reactivity. Replanning more often would restore it, but the perception-to-action pipeline (a large backbone plus multiple denoising steps) is too slow: this latency forbids frequent replanning and leaves committed actions stale, making such policies ill-suited for dynamic, closed-loop control. We present πR^2, which makes these policies reactive and real-time while retaining large backbones, expressive multi-modal policies, and multi-action prediction. Built on the per-position noise schedule of diffusion forcing, πR^2 contributes two ideas. First, it splits conditioning into a fast channel (proprioception, fresh every tick) and an asynchronously updated slow channel (vision-language features), so the policy reacts to proprioception within a chunk while tolerating stale vision. Second, a latency-adaptive flow schedule treats in-flight actions as inpainting conditioning and emits actions in one denoising step per call, letting one trained model adapt to varying hardware latency. Requiring minimal modification to existing architectures, πR^2 can be finetuned from a pretrained policy: applied to GR00T-N1.7 on a real xArm6+XHand platform, it replans closed-loop roughly 4times faster than the base policy (~25Hz on an A5000 GPU), acting on a fresh observation every 40ms. Across simulation and real-world manipulation tasks, πR^2 improves the success rate by up to 23% in simulation and 30% in the real world over the strongest baseline. Project page: https://pi-r2-flow.github.io/

Deep learning practitioners often operate on a computational and monetary budget. Thus, it is critical to design optimization algorithms that perform well under any budget. The linear learning rate schedule is considered the best budget-aware schedule, as it outperforms most other schedules in the low budget regime. On the other hand, learning rate schedules -- such as the 30-60-90 step schedule -- are known to achieve high performance when the model can be trained for many epochs. Yet, it is often not known a priori whether one's budget will be large or small; thus, the optimal choice of learning rate schedule is made on a case-by-case basis. In this paper, we frame the learning rate schedule selection problem as a combination of i) selecting a profile (i.e., the continuous function that models the learning rate schedule), and ii) choosing a sampling rate (i.e., how frequently the learning rate is updated/sampled from this profile). We propose a novel profile and sampling rate combination called the Reflected Exponential (REX) schedule, which we evaluate across seven different experimental settings with both SGD and Adam optimizers. REX outperforms the linear schedule in the low budget regime, while matching or exceeding the performance of several state-of-the-art learning rate schedules (linear, step, exponential, cosine, step decay on plateau, and OneCycle) in both high and low budget regimes. Furthermore, REX requires no added computation, storage, or hyperparameters.

Decentralized LLM-based multi-agent systems coordinate through local interactions, but an agent can remain responsive while its task-solving quality persistently degrades. Such gray failures require protecting current tasks before sufficient evidence exists to alter future routing, while still allowing recovered agents to rejoin. We introduce MeshHeal, a fully decentralized self-healing framework that couples ability-matched peer review across two timescales. At the fast timescale, an adaptive hierarchy escalates uncertain or low-scoring outputs from repeated single-reviewer evaluation to committee deliberation and, when needed, correction before use. At the slow timescale, a task- and ability-conditioned peer-relative detector aggregates scores to distinguish persistent degradation from ordinary output variation, trigger mandatory committee review, and eventually exclude degraded agents from ordinary routing; recovery probes provide fresh evidence for reintegration. To faithfully evaluate routing, we introduce Model-Backed MAS Evaluation, which ties ability assignments to execution models, since prompt-based ability assignments alone can leave routing errors hidden. Across BBH, MATH, and MMLU-Pro, MeshHeal achieves 0.839 degraded-phase accuracy using 51k total model tokens per task, versus the strongest baseline Symphony's 0.807 accuracy using 115k per task. Under staggered degradation and recovery, MeshHeal isolates degraded agents, keeps them excluded from ordinary task execution until recovery, and returns them to normal routing.

Plateaus, where an agent's performance stagnates at a suboptimal level, are a common problem in deep on-policy RL. Focusing on PPO due to its widespread adoption, we show that plateaus in certain regimes arise not because of known exploration, capacity, or optimization challenges, but because sample-based estimates of the loss eventually become poor proxies for the true objective over the course of training. As a recap, PPO switches between sampling rollouts from several parallel environments online using the current policy (which we call the outer loop) and performing repeated minibatch SGD steps against this offline dataset (the inner loop). In our work we consider only the outer loop, and conceptually model it as stochastic optimization. The step size is then controlled by the regularization strength towards the previous policy and the gradient noise by the number of samples collected between policy update steps. This model predicts that performance will plateau at a suboptimal level if the outer step size is too large relative to the noise. Recasting PPO in this light makes it clear that there are two ways to address this particular type of learning stagnation: either reduce the step size or increase the number of samples collected between updates. We first validate the predictions of our model and investigate how hyperparameter choices influence the step size and update noise, concluding that increasing the number of parallel environments is a simple and robust way to reduce both factors. Next, we propose a recipe for how to co-scale the other hyperparameters when increasing parallelization, and show that incorrectly doing so can lead to severe performance degradation. Finally, we vastly outperform prior baselines in a complex open-ended domain by scaling PPO to more than 1M parallel environments, thereby enabling monotonic performance improvement up to one trillion transitions.

Despite significant advances in optimizers for training, most research works use common scheduler choices like Cosine or exponential decay. In this paper, we study GreedyLR, a novel scheduler that adaptively adjusts the learning rate during training based on the current loss. To validate the effectiveness of our proposed scheduler, we conduct experiments on several NLP, CV, and LLM tasks with up to 7B parameters, including both fine-tuning and pre-training experiments. The results show that our approach outperforms several state-of-the-art schedulers in terms of accuracy, speed, and convergence. We also provide a theoretical analysis of the GreedyLR algorithm, including a proof of convergence and derivation of the optimal scaling factor F that maximizes the convergence rate, along with experiments to show robustness of the algorithm to realistic noisy landscapes. Our scheduler is easy to implement, computationally efficient, and could be considered a good default scheduler for training.

We investigate the convergence rates and data sample sizes required for training a machine learning model using a stochastic gradient descent (SGD) algorithm, where data points are sampled based on either their loss value or uncertainty value. These training methods are particularly relevant for active learning and data subset selection problems. For SGD with a constant step size update, we present convergence results for linear classifiers and linearly separable datasets using squared hinge loss and similar training loss functions. Additionally, we extend our analysis to more general classifiers and datasets, considering a wide range of loss-based sampling strategies and smooth convex training loss functions. We propose a novel algorithm called Adaptive-Weight Sampling (AWS) that utilizes SGD with an adaptive step size that achieves stochastic Polyak's step size in expectation. We establish convergence rate results for AWS for smooth convex training loss functions. Our numerical experiments demonstrate the efficiency of AWS on various datasets by using either exact or estimated loss values.

Recent large language models (LLMs) have tended to leverage sparsity to reduce computations, employing the sparsely activated mixture-of-experts (MoE) technique. MoE introduces four modules, including token routing, token communication, expert computation, and expert parallelism, that impact model quality and training efficiency. To enable versatile usage of MoE models, we introduce FSMoE, a flexible training system optimizing task scheduling with three novel techniques: 1) Unified abstraction and online profiling of MoE modules for task scheduling across various MoE implementations. 2) Co-scheduling intra-node and inter-node communications with computations to minimize communication overheads. 3) To support near-optimal task scheduling, we design an adaptive gradient partitioning method for gradient aggregation and a schedule to adaptively pipeline communications and computations. We conduct extensive experiments with configured MoE layers and real-world MoE models on two GPU clusters. Experimental results show that 1) our FSMoE supports four popular types of MoE routing functions and is more efficient than existing implementations (with up to a 1.42times speedup), and 2) FSMoE outperforms the state-of-the-art MoE training systems (DeepSpeed-MoE and Tutel) by 1.18times-1.22times on 1458 MoE layers and 1.19times-3.01times on real-world MoE models based on GPT-2 and Mixtral using a popular routing function.

Effective learning rate (LR) scheduling is crucial for training deep neural networks. However, popular pre-defined and adaptive schedulers can still lead to suboptimal generalization. This paper introduces VolSched, a novel adaptive LR scheduler inspired by the concept of volatility in stochastic processes like Geometric Brownian Motion to dynamically adjust the learning rate. By calculating the ratio between long-term and short-term accuracy volatility, VolSched increases the LR to escape plateaus and decreases it to stabilize training, allowing the model to explore the loss landscape more effectively. We evaluate VolSched on the CIFAR-100 dataset against a strong baseline using a standard augmentation pipeline. When paired with ResNet-18 and ResNet-34, our scheduler delivers consistent performance gains, improving top-1 accuracy by 1.4 and 1.3 percentage points respectively. Analysis of the loss curves reveals that VolSched promotes a longer exploration phase. A quantitative analysis of the Hessian shows that VolSched finds a final solution that is 38% flatter than the next-best baseline, allowing the model to obtain wider minima and hence better generalization performance.

We propose an adaptive step size with an energy approach for a suitable class of preconditioned gradient descent methods. We focus on settings where the preconditioning is applied to address the constraints in optimization problems, such as the Hessian-Riemannian and natural gradient descent methods. More specifically, we incorporate these preconditioned gradient descent algorithms in the recently introduced Adaptive Energy Gradient Descent (AEGD) framework. In particular, we discuss theoretical results on the unconditional energy-stability and convergence rates across three classes of objective functions. Furthermore, our numerical results demonstrate excellent performance of the proposed method on several test bed optimization problems.

The learning rate (LR) schedule is one of the most important hyper-parameters needing careful tuning in training DNNs. However, it is also one of the least automated parts of machine learning systems and usually costs significant manual effort and computing. Though there are pre-defined LR schedules and optimizers with adaptive LR, they introduce new hyperparameters that need to be tuned separately for different tasks/datasets. In this paper, we consider the question: Can we automatically tune the LR over the course of training without human involvement? We propose an efficient method, AutoLRS, which automatically optimizes the LR for each training stage by modeling training dynamics. AutoLRS aims to find an LR applied to every tau steps that minimizes the resulted validation loss. We solve this black-box optimization on the fly by Bayesian optimization (BO). However, collecting training instances for BO requires a system to evaluate each LR queried by BO's acquisition function for tau steps, which is prohibitively expensive in practice. Instead, we apply each candidate LR for only tau'lltau steps and train an exponential model to predict the validation loss after tau steps. This mutual-training process between BO and the loss-prediction model allows us to limit the training steps invested in the BO search. We demonstrate the advantages and the generality of AutoLRS through extensive experiments of training DNNs for tasks from diverse domains using different optimizers. The LR schedules auto-generated by AutoLRS lead to a speedup of 1.22times, 1.43times, and 1.5times when training ResNet-50, Transformer, and BERT, respectively, compared to the LR schedules in their original papers, and an average speedup of 1.31times over state-of-the-art heavily-tuned LR schedules.

Diffusion models achieve remarkable generation quality but suffer from computational intensive sampling due to suboptimal step discretization. While existing works focus on optimizing denoising directions, we address the principled design of stepsize schedules. This paper proposes Optimal Stepsize Distillation, a dynamic programming framework that extracts theoretically optimal schedules by distilling knowledge from reference trajectories. By reformulating stepsize optimization as recursive error minimization, our method guarantees global discretization bounds through optimal substructure exploitation. Crucially, the distilled schedules demonstrate strong robustness across architectures, ODE solvers, and noise schedules. Experiments show 10x accelerated text-to-image generation while preserving 99.4% performance on GenEval. Our code is available at https://github.com/bebebe666/OptimalSteps.

Many existing reinforcement learning (RL) methods employ stochastic gradient iteration on the back end, whose stability hinges upon a hypothesis that the data-generating process mixes exponentially fast with a rate parameter that appears in the step-size selection. Unfortunately, this assumption is violated for large state spaces or settings with sparse rewards, and the mixing time is unknown, making the step size inoperable. In this work, we propose an RL methodology attuned to the mixing time by employing a multi-level Monte Carlo estimator for the critic, the actor, and the average reward embedded within an actor-critic (AC) algorithm. This method, which we call Multi-level Actor-Critic (MAC), is developed especially for infinite-horizon average-reward settings and neither relies on oracle knowledge of the mixing time in its parameter selection nor assumes its exponential decay; it, therefore, is readily applicable to applications with slower mixing times. Nonetheless, it achieves a convergence rate comparable to the state-of-the-art AC algorithms. We experimentally show that these alleviated restrictions on the technical conditions required for stability translate to superior performance in practice for RL problems with sparse rewards.

A central challenge for language agents is utilizing past experience to adapt to dynamic test-time conditions. While recent work demonstrates the promise of agentic memory mechanisms, most systems restrict retrieval to episode initiation. Consequently, agents are forced to rely on static guidance that becomes increasingly misaligned as long-horizon tasks unfold. To address this rigidity, we propose the Adaptive Memory Agent (AdaMEM), a novel framework for agent test-time adaptation. Without updating model parameters online, AdaMEM adapts agent behavior via a hybrid memory architecture: it maintains a long-term trajectory memory of raw experiences collected offline while generating dynamic short-term strategy memory on-the-fly to guide decision-making. This mechanism enables the trade-off between token efficiency and adaptability across varying inference-time compute levels. Empirically, AdaMEM significantly outperforms static memory baselines, achieving relative gains of up to 13% on ALFWorld and 11% on WebShop, with consistent leading performance extending to agentic search on HotpotQA. To further enhance this adaptation, we develop STEP-MFT, a Step-wise Memory Fine-Tuning technique that trains the policy to synthesize high-quality strategies from retrieved experiences, yielding additional performance gains. Our work establishes a new scaling dimension for agentic memory, supporting continuous reasoning and self-evolution post-deployment in real-world environments. Our code is available at https://github.com/yunx-z/AdaMEM.

The concept of Critical Batch Size, as pioneered by OpenAI, has long served as a foundational principle for large-scale pre-training. However, with the paradigm shift towards the Warmup-Stable-Decay (WSD) learning rate scheduler, we observe that the original theoretical framework and its underlying mechanisms fail to align with new pre-training dynamics. To bridge this gap between theory and practice, this paper derives a revised E(S) relationship tailored for WSD scheduler, characterizing the trade-off between training data consumption E and steps S during pre-training. Our theoretical analysis reveals two fundamental properties of WSD-based pre-training: 1) B_min, the minimum batch size threshold required to achieve a target loss, and 2) B_opt, the optimal batch size that maximizes data efficiency by minimizing total tokens. Building upon these properties, we propose a dynamic Batch Size Scheduler. Extensive experiments demonstrate that our revised formula precisely captures the dynamics of large-scale pre-training, and the resulting scheduling strategy significantly enhances both training efficiency and final model quality.

The choice of batch sizes in stochastic gradient optimizers is critical for model training. However, the practice of varying batch sizes throughout the training process is less explored compared to other hyperparameters. We investigate adaptive batch size strategies derived from adaptive sampling methods, traditionally applied only in stochastic gradient descent. Given the significant interplay between learning rates and batch sizes, and considering the prevalence of adaptive gradient methods in deep learning, we emphasize the need for adaptive batch size strategies in these contexts. We introduce AdAdaGrad and its scalar variant AdAdaGradNorm, which incrementally increase batch sizes during training, while model updates are performed using AdaGrad and AdaGradNorm. We prove that AdaGradNorm converges with high probability at a rate of O(1/K) for finding a first-order stationary point of smooth nonconvex functions within K iterations. AdaGrad also demonstrates similar convergence properties when integrated with a novel coordinate-wise variant of our adaptive batch size strategies. Our theoretical claims are supported by numerical experiments on various image classification tasks, highlighting the enhanced adaptability of progressive batching protocols in deep learning and the potential of such adaptive batch size strategies with adaptive gradient optimizers in large-scale model training.

Adaptive optimization methods are widely recognized as among the most popular approaches for training Deep Neural Networks (DNNs). Techniques such as Adam, AdaGrad, and AdaHessian utilize a preconditioner that modifies the search direction by incorporating information about the curvature of the objective function. However, despite their adaptive characteristics, these methods still require manual fine-tuning of the step-size. This, in turn, impacts the time required to solve a particular problem. This paper presents an optimization framework named SANIA to tackle these challenges. Beyond eliminating the need for manual step-size hyperparameter settings, SANIA incorporates techniques to address poorly scaled or ill-conditioned problems. We also explore several preconditioning methods, including Hutchinson's method, which approximates the Hessian diagonal of the loss function. We conclude with an extensive empirical examination of the proposed techniques across classification tasks, covering both convex and non-convex contexts.

We study Stochastic Gradient Descent with AdaGrad stepsizes: a popular adaptive (self-tuning) method for first-order stochastic optimization. Despite being well studied, existing analyses of this method suffer from various shortcomings: they either assume some knowledge of the problem parameters, impose strong global Lipschitz conditions, or fail to give bounds that hold with high probability. We provide a comprehensive analysis of this basic method without any of these limitations, in both the convex and non-convex (smooth) cases, that additionally supports a general ``affine variance'' noise model and provides sharp rates of convergence in both the low-noise and high-noise~regimes.

Language agents have shown promising adaptability in dynamic environments to perform complex tasks. However, despite the versatile knowledge embedded in large language models, these agents still fall short when it comes to tasks that require planning. We introduce STEP, a novel framework designed to efficiently learn from previous experiences to enhance the planning capabilities of language agents in future steps. Concretely, STEP functions through four interconnected components. First, the Planner takes on the task, breaks it down into subtasks and provides relevant insights. Then the Executor generates action candidates, while the Evaluator ensures the actions align with learned rules from previous experiences. Lastly, Memory stores experiences to inform future decisions. In the ScienceWorld benchmark, our results show that STEP consistently outperforms state-of-the-art models, achieving an overall score of 67.4 and successfully completing 12 out of 18 tasks. These findings highlight STEP's potential as a framework for enhancing planning capabilities in language agents, paving the way for more sophisticated task-solving in dynamic environments.

Stochastic gradient descent method and its variants constitute the core optimization algorithms that achieve good convergence rates for solving machine learning problems. These rates are obtained especially when these algorithms are fine-tuned for the application at hand. Although this tuning process can require large computational costs, recent work has shown that these costs can be reduced by line search methods that iteratively adjust the stepsize. We propose an alternative approach to stochastic line search by using a new algorithm based on forward step model building. This model building step incorporates second-order information that allows adjusting not only the stepsize but also the search direction. Noting that deep learning model parameters come in groups (layers of tensors), our method builds its model and calculates a new step for each parameter group. This novel diagonalization approach makes the selected step lengths adaptive. We provide convergence rate analysis, and experimentally show that the proposed algorithm achieves faster convergence and better generalization in well-known test problems. More precisely, SMB requires less tuning, and shows comparable performance to other adaptive methods.

Computation cost is a critical challenge for LLM agent systems, as their long-horizon trajectories continuously accumulate computational overhead. While existing studies focus on improving the overall efficiency of agent systems, the efficiency of individual steps remains largely unexplored. In this paper, we propose and formulate a new research problem: redundant step detection, aiming to detect these steps that consume substantial computational resources while contributing little or nothing to task completion. To support this initiative, we introduce RedundancyBench, a new benchmark that contains 1,920 trajectories collected from 6 different LLMs with 3,613 step-level annotations. Using RedundancyBench, we develop and evaluate 6 frontier LLMs and Jev as redundant step detectors, summarizing their strengths and limitations. Our experiments reveal that the redundant step detection is still challenging even for SOTA models, such as Claude-Opus-5, particularly without prior information. Code and dataset in this paper are both available in https://anonymous.4open.science/r/RedundancyBench-E0CB.

Existing learning rate schedules that do not require specification of the optimization stopping step T are greatly out-performed by learning rate schedules that depend on T. We propose an approach that avoids the need for this stopping time by eschewing the use of schedules entirely, while exhibiting state-of-the-art performance compared to schedules across a wide family of problems ranging from convex problems to large-scale deep learning problems. Our Schedule-Free approach introduces no additional hyper-parameters over standard optimizers with momentum. Our method is a direct consequence of a new theory we develop that unifies scheduling and iterate averaging. An open source implementation of our method is available (https://github.com/facebookresearch/schedule_free).

Large language model (LLM) agents have demonstrated strong capabilities in complex interactive decision-making tasks. However, existing LLM agents typically rely on increasingly long interaction histories, resulting in high computational cost and limited scalability. In this paper, we propose STEP-HRL, a hierarchical reinforcement learning (HRL) framework that enables step-level learning by conditioning only on single-step transitions rather than full interaction histories. STEP-HRL structures tasks hierarchically, using completed subtasks to represent global progress of overall task. By introducing a local progress module, it also iteratively and selectively summarizes interaction history within each subtask to produce a compact summary of local progress. Together, these components yield augmented step-level transitions for both high-level and low-level policies. Experimental results on ScienceWorld and ALFWorld benchmarks consistently demonstrate that STEP-HRL substantially outperforms baselines in terms of performance and generalization while reducing token usage. Our code is available at https://github.com/TonyStark042/STEP-HRL.

Trajectory-level GRPO is a common approach for training multi-step GUI agents, but repeatedly rolling out complete trajectories from the task root can be inefficient: task-level rewards provide coarse supervision over which intermediate decisions require improvement, while already-mastered prefixes are repeatedly re-executed before reaching difficult states. We introduce a two-stage adaptive training framework that jointly addresses where to learn and how far to roll out. We first construct reusable intermediate checkpoints from successful expert trajectories and select informative pivots using action disagreement, which measures uncertainty directly from sampled GUI actions. Stage I performs one-step RL at these pivots to improve uncertain local decisions. Stage II then progressively expands policy responsibility through adaptive Local, Suffix, and Root training according to task progress. Recoverable checkpoints enable repeated training from intermediate states without replaying the preceding trajectory. Across MobileGym and CUA-Gym-Hub, our method reduces environment interaction by 56-61% relative to Vanilla GRPO while improving task performance, demonstrating that jointly allocating training across states and rollout ranges can substantially improve GUI-agent RL efficiency.

Training large language models requires jointly configuring two interdependent aspects of the system: the global batch size, which governs statistical efficiency, and the 3D parallelism strategy, which governs hardware throughput. Existing approaches make these decisions independently: optimization work adapts the batch size to track the evolving critical batch size while keeping parallelism fixed, and systems work selects the fastest parallelism for a given fixed batch size without anticipating that the optimal batch size could change. We show that these decisions are tightly coupled: the throughput-optimal parallelism strategy may shift as the global batch size changes, so any method that fixes one while adapting the other operates with a suboptimal configuration for part of the training run. We present COPUS, a system that adaptively tunes the global batch size, parallelism strategy, and micro-batch size as training evolves. COPUS is guided by Goodput, the product of throughput and statistical efficiency, which models both hardware and statistical effects jointly and directly measures useful convergence per unit of wall-clock time. The system combines online gradient noise scale estimation under 3D parallelism with throughput-aware evaluation of candidate configurations, and supports efficient reconfiguration of both batch size and parallelism during training. We evaluate COPUS on LLM pre-training workloads across 1-4 nodes of 8xH100 and 8xMI210 GPUs and model sizes from 3B to 32B parameters, demonstrating average time-to-convergence speedups of 3.9-8.0% over the fastest baseline across four configurations, with peak gains up to 11.1%, including system overheads.

Many problems in astrophysics cover multiple orders of magnitude in spatial and temporal scales. While simulating systems that experience rapid changes in these conditions, it is essential to adapt the (time-) step size to capture the behavior of the system during those rapid changes and use a less accurate time step at other, less demanding, moments. We encounter three problems with traditional methods. Firstly, making such changes requires expert knowledge of the astrophysics as well as of the details of the numerical implementation. Secondly, some parameters that determine the time-step size are fixed throughout the simulation, which means that they do not adapt to the rapidly changing conditions of the problem. Lastly, we would like the choice of time-step size to balance accuracy and computation effort. We address these challenges with Reinforcement Learning by training it to select the time-step size dynamically. We use the integration of a system of three equal-mass bodies that move due to their mutual gravity as an example of its application. With our method, the selected integration parameter adapts to the specific requirements of the problem, both in terms of computation time and accuracy while eliminating the expert knowledge needed to set up these simulations. Our method produces results competitive to existing methods and improve the results found with the most commonly-used values of time-step parameter. This method can be applied to other integrators without further retraining. We show that this extrapolation works for variable time-step integrators but does not perform to the desired accuracy for fixed time-step integrators.

Dynamic adaptation has become an essential technique in accelerating distributed machine learning (ML) training. Recent studies have shown that dynamically adjusting model structure (e.g., lottery ticket hypothesis) or hyperparameters (e.g., batch size) can significantly accelerate training without sacrificing accuracy. However, existing ML cluster schedulers are not designed to handle dynamic adaptation. We show that existing schemes fail to provide fairness and degrade system efficiency when the training throughput changes over time under dynamic adaptation. We design Shockwave, a scheduler with future planning that builds on two key ideas. First, Shockwave extends classic market theory from static settings to dynamic settings to co-optimize efficiency and fairness. Second, Shockwave utilizes stochastic dynamic programming to handle dynamic changes. We build a system for Shockwave and validate its performance with both trace-driven simulation and cluster experiments. Results show that for traces of ML jobs with dynamic adaptation, Shockwave improves makespan by 1.3X and fairness by 2X when compared with existing fair scheduling schemes.

This paper introduces bucket calculus, a novel mathematical framework that fundamentally transforms the computational complexity landscape of parallel machine scheduling optimization. We address the strongly NP-hard problem P2|r_j|C_{max} through an innovative adaptive temporal discretization methodology that achieves exponential complexity reduction from O(T^n) to O(B^n) where B ll T, while maintaining near-optimal solution quality. Our bucket-indexed mixed-integer linear programming (MILP) formulation exploits dimensional complexity heterogeneity through precision-aware discretization, reducing decision variables by 94.4\% and achieving a theoretical speedup factor 2.75 times 10^{37} for 20-job instances. Theoretical contributions include partial discretization theory, fractional bucket calculus operators, and quantum-inspired mechanisms for temporal constraint modeling. Empirical validation on instances with 20--400 jobs demonstrates 97.6\% resource utilization, near-perfect load balancing (σ/μ= 0.006), and sustained performance across problem scales with optimality gaps below 5.1\%. This work represents a paradigm shift from fine-grained temporal discretization to multi-resolution precision allocation, bridging the fundamental gap between exact optimization and computational tractability for industrial-scale NP-hard scheduling problems.

Large Language Models (LLMs) are increasingly being used for interactive decision-making tasks requiring planning and adapting to the environment. Recent works employ LLMs-as-agents in broadly two ways: iteratively determining the next action (iterative executors) or generating plans and executing sub-tasks using LLMs (plan-and-execute). However, these methods struggle with task complexity, as the inability to execute any sub-task may lead to task failure. To address these shortcomings, we introduce As-Needed Decomposition and Planning for complex Tasks (ADaPT), an approach that explicitly plans and decomposes complex sub-tasks as-needed, i.e., when the LLM is unable to execute them. ADaPT recursively decomposes sub-tasks to adapt to both task complexity and LLM capability. Our results demonstrate that ADaPT substantially outperforms established strong baselines, achieving success rates up to 28.3% higher in ALFWorld, 27% in WebShop, and 33% in TextCraft -- a novel compositional dataset that we introduce. Through extensive analysis, we illustrate the importance of multilevel decomposition and establish that ADaPT dynamically adjusts to the capabilities of the executor LLM as well as to task complexity.

The growing demand for large language models (LLMs) requires serving systems to handle many concurrent requests with diverse service level objectives (SLOs). This exacerbates head-of-line (HoL) blocking during the compute-intensive prefill phase, where long-running requests monopolize resources and delay higher-priority ones, leading to widespread time-to-first-token (TTFT) SLO violations. While chunked prefill enables interruptibility, it introduces an inherent trade-off between responsiveness and throughput: reducing chunk size improves response latency but degrades computational efficiency, whereas increasing chunk size maximizes throughput but exacerbates blocking. This necessitates an adaptive preemption mechanism. However, dynamically balancing execution granularity against scheduling overheads remains a key challenge. In this paper, we propose FlowPrefill, a TTFT-goodput-optimized serving system that resolves this conflict by decoupling preemption granularity from scheduling frequency. To achieve adaptive prefill scheduling, FlowPrefill introduces two key innovations: 1) Operator-Level Preemption, which leverages operator boundaries to enable fine-grained execution interruption without the efficiency loss associated with fixed small chunking; and 2) Event-Driven Scheduling, which triggers scheduling decisions only upon request arrival or completion events, thereby supporting efficient preemption responsiveness while minimizing control-plane overhead. Evaluation on real-world production traces shows that FlowPrefill improves maximum goodput by up to 5.6times compared to state-of-the-art systems while satisfying heterogeneous SLOs.

An agent can improve its behavior within an unresolved problem by changing how it acts and which experience it retains. We propose MMLA-RSI, a recursive self-improvement scheme with two implementations in Memory-Mediated Learning Architecture: Reasoning-Time Training (RTT) changes the policy state Φ, while Reasoning-Time Memory Adaptation (RTMA) changes authoritative memory M. Each route also makes its adaptation method an object of improvement. A current numerical updater trains the policy proposing its successor; a current memory manager chooses the records available to the process proposing its successor. An independently admitted successor takes over the same role in the next generation. We give bounded executable rule languages, shared task/proposal interfaces, and one algorithm for either route or their composition. The RTT instance changes scalar schedules in a clipped-momentum update. The RTMA instance chooses NULL or a complete-row write with possible eviction. A fixed interpreter, trusted committer, and independent evaluator bound what can change. State versions, read closures, and conditional properties describe causal execution, accepted transitions, and finite work. Existing numerical-component studies motivate the construction. In four-candidate program selection, retaining LARC feedback updates reduces expected error by 24.65 and 36.65 percentage points for two trained initializations. In chronological continuous-integration replay, feedback binding is positive while retention increases loss. Completed SQL studies improve substantially over an unadapted substrate but do not establish the required additional online benefit. These results characterize their declared components. The two recursive routes and their joint realization are specified here; their beneficial recursive chains and discovery efficiency remain to be evaluated.

Multi-agent reasoning systems adopt a "generate-then-transfer" paradigm that forces end-to-end latency to scale linearly with pipeline depth. We introduce StreamMA, a multi-agent reasoning system that streams each reasoning step to downstream agents as soon as it is generated, pipelining adjacent agents and thus reducing latency. Surprisingly, this pipelining also improves effectiveness: because multi-step reasoning quality is non-uniform and early steps are more reliable than later ones, working with these reliable early steps instead of the full chain prevents error-prone late steps from misleading downstream agents. We formalize both advantages with the first closed-form joint analysis of stream, serial, and single protocols, deriving the effectiveness ordering, speedup upper bound, and cost ratio. Across eight reasoning benchmarks spanning mathematics, science, and code, two frontier LLMs (Claude Opus 4.6 and GPT-5.4), and three topologies (Chain, Tree, Graph), StreamMA outperforms both baselines (avg. +7.3 pp, max +22.4 pp on HMMT 2026; Claude Opus 4.6-high). Beyond these contributions, we discover a "step-level scaling law": increasing per-agent steps consistently improves both effectiveness and efficiency, a new scaling dimension orthogonal to and composable with agent-count scaling.

LAPS identifies and disaggregates requests with different prompt lengths in LLM serving to reduce TTFT latency. While recent systems have decoupled the prefill and decode stages to improve throughput, they still rely on unified scheduling policies that fail to adapt to heterogeneous workload characteristics. We observe that prompt-length variations lead to distinct performance bottlenecks, motivating an adaptive scheduling strategy. LAPS disaggregates multi-turn long-prefill requests from short-prefill ones and introduces a length-aware smart batching mechanism for short-prefill workloads. It adopts a dual-queue design that supports temporal disaggregation on a single prefill instance or spatial disaggregation across multiple instances. For short-prefill batches, a batch waiting window and CUDA Graph-based clustering mitigate interference from heterogeneous computation, reducing batching delay and lowering average latency. In real multi-turn workloads, LAPS reduces prefill latency by over 30\% compared to vanilla SGLang under prefill-decode disaggregation, and further decreases SLO violations by 28\% in multi-instance deployments with vanilla data-parallel configuration. Compared to the SGLang router with load balancing, it further lowers SLO violations by 12\% in multi-GPU settings. Under high concurrency and mixed-request scenarios, LAPS improves request throughput by 35\% serving Qwen2.5-32B model for prefill instance, demonstrating its effectiveness in optimizing heterogeneous LLM serving workloads.

Diffusion Policy has demonstrated strong visuomotor modeling capabilities, but its high computational cost renders it impractical for real-time robotic control. Despite huge redundancy across repetitive denoising steps, existing diffusion acceleration techniques fail to generalize to Diffusion Policy due to fundamental architectural and data divergences. In this paper, we propose Block-wise Adaptive Caching(BAC), a method to accelerate Diffusion Policy by caching intermediate action features. BAC achieves lossless action generation acceleration by adaptively updating and reusing cached features at the block level, based on a key observation that feature similarities vary non-uniformly across timesteps and locks. To operationalize this insight, we first propose the Adaptive Caching Scheduler, designed to identify optimal update timesteps by maximizing the global feature similarities between cached and skipped features. However, applying this scheduler for each block leads to signiffcant error surges due to the inter-block propagation of caching errors, particularly within Feed-Forward Network (FFN) blocks. To mitigate this issue, we develop the Bubbling Union Algorithm, which truncates these errors by updating the upstream blocks with signiffcant caching errors before downstream FFNs. As a training-free plugin, BAC is readily integrable with existing transformer-based Diffusion Policy and vision-language-action models. Extensive experiments on multiple robotic benchmarks demonstrate that BAC achieves up to 3x inference speedup for free.

Federated learning (FL) is a distributed machine learning framework where the global model of a central server is trained via multiple collaborative steps by participating clients without sharing their data. While being a flexible framework, where the distribution of local data, participation rate, and computing power of each client can greatly vary, such flexibility gives rise to many new challenges, especially in the hyperparameter tuning on the client side. We propose Delta-SGD, a simple step size rule for SGD that enables each client to use its own step size by adapting to the local smoothness of the function each client is optimizing. We provide theoretical and empirical results where the benefit of the client adaptivity is shown in various FL scenarios.

We consider solving equality-constrained nonlinear, nonconvex optimization problems. This class of problems appears widely in a variety of applications in machine learning and engineering, ranging from constrained deep neural networks, to optimal control, to PDE-constrained optimization. We develop an adaptive inexact Newton method for this problem class. In each iteration, we solve the Lagrangian Newton system inexactly via a randomized iterative sketching solver, and select a suitable stepsize by performing line search on an exact augmented Lagrangian merit function. The randomized solvers have advantages over deterministic linear system solvers by significantly reducing per-iteration flops complexity and storage cost, when equipped with suitable sketching matrices. Our method adaptively controls the accuracy of the randomized solver and the penalty parameters of the exact augmented Lagrangian, to ensure that the inexact Newton direction is a descent direction of the exact augmented Lagrangian. This allows us to establish a global almost sure convergence. We also show that a unit stepsize is admissible locally, so that our method exhibits a local linear convergence. Furthermore, we prove that the linear convergence can be strengthened to superlinear convergence if we gradually sharpen the adaptive accuracy condition on the randomized solver. We demonstrate the superior performance of our method on benchmark nonlinear problems in CUTEst test set, constrained logistic regression with data from LIBSVM, and a PDE-constrained problem.

Stepwise group-based RL is an attractive way to train long-horizon LLM agents without a learned critic: it reuses multiple sampled rollouts to estimate local advantages. Its weakness is less visible but more fundamental: every group-relative estimator assumes that the steps it compares are equivalent for credit assignment. We show that current agentic variants violate this assumption through a state-action credit mismatch. The observation-hash partition is overly fine on the state side, creating singleton groups with zero step-level signal, while a single within-group mean is too coarse on the action side, mixing state-value estimation with action-specific credit. We introduce BiPACE (Bisimulation-Guided Policy Optimization with Action Counterfactual Estimation), a drop-in advantage estimator that fixes both sides without adding a critic, auxiliary loss, or extra rollouts. BiGPO clusters steps by cosine distance in the actor's own hidden-state geometry, an empirical policy-induced proxy for bisimulation that substantially lowers the singleton rate left by observation hashing. PACE then recenters returns within each behavioral cluster using action-conditioned peer baselines; its Q-style instance estimates a local Q(s,a)-V(s) nonparametrically. On ALFWorld/Qwen2.5-7B, BiPACE_Q raises overall validation success from GiGPO's 90.8 to 97.1pm0.9 over three seeds, and crosses the 95% threshold on every seed, which GiGPO never does within the same budget. On Qwen2.5-1.5B it reaches 93.5pm1.2 versus GiGPO's 86.7, and on WebShop and TextCraft it improves over GRPO and GiGPO at both model scales. The measured BiPACE-specific overhead is 11.3% of a single training-step wall time. Yet it changes the estimator's comparison unit from surface identity to approximate behavioral equivalence plus action-side counterfactuals. The code is available at https://github.com/TianxiangZhao/BiPACE.

Pipeline parallelism is one of the key components for large-scale distributed training, yet its efficiency suffers from pipeline bubbles which were deemed inevitable. In this work, we introduce a scheduling strategy that, to our knowledge, is the first to successfully achieve zero pipeline bubbles under synchronous training semantics. The key idea behind this improvement is to split the backward computation into two parts, one that computes gradient for the input and another that computes for the parameters. Based on this idea, we handcraft novel pipeline schedules that significantly outperform the baseline methods. We further develop an algorithm that automatically finds an optimal schedule based on specific model configuration and memory limit. Additionally, to truly achieve zero bubble, we introduce a novel technique to bypass synchronizations during the optimizer step. Experimental evaluations show that our method outperforms the 1F1B schedule up to 23% in throughput under a similar memory limit. This number can be further pushed to 31% when the memory constraint is relaxed. We believe our results mark a major step forward in harnessing the true potential of pipeline parallelism. We open sourced our implementation based on the popular Megatron-LM repository on https://github.com/sail-sg/zero-bubble-pipeline-parallelism.

The exploration and application of Large Language Models (LLMs) is thriving. To reduce deployment costs, continuous batching has become an essential feature in current service frameworks. The effectiveness of continuous batching relies on an accurate estimate of the memory requirements of requests. However, due to the diversity in request output lengths, existing frameworks tend to adopt aggressive or conservative schedulers, which often result in significant overestimation or underestimation of memory consumption. Consequently, they suffer from harmful request evictions or prolonged queuing times, failing to achieve satisfactory throughput under strict Service Level Agreement (SLA) guarantees (a.k.a. goodput), across various LLM application scenarios with differing input-output length distributions. To address this issue, we propose a novel Past-Future scheduler that precisely estimates the peak memory resources required by the running batch via considering the historical distribution of request output lengths and calculating memory occupancy at each future time point. It adapts to applications with all types of input-output length distributions, balancing the trade-off between request queuing and harmful evictions, thereby consistently achieving better goodput. Furthermore, to validate the effectiveness of the proposed scheduler, we developed a high-performance LLM serving framework, LightLLM, that implements the Past-Future scheduler. Compared to existing aggressive or conservative schedulers, LightLLM demonstrates superior goodput, achieving up to 2-3times higher goodput than other schedulers under heavy loads. LightLLM is open source to boost the research in such direction (https://github.com/ModelTC/lightllm).

Continual-learning agents are systems of models, harnesses, and memory operating over long multi-session horizons. Evaluating and training them requires interleaving tasks with agent-side events such as session stop and start, crons, and memory consolidation. Yet existing benchmarks and training frameworks schedule only the benchmark's own events, leaving each benchmark and agent pair to build a custom scheduling loop. We present SCLATE, an execution substrate where benchmarks and unmodified agents each add their events to one open event scheduler through an adapter. A hybrid simulated clock runs these events on a shared timeline, flowing in real time while the agent works and skipping idle gaps, which compresses a month-long scenario into hours. SCLATE also serves as a rollout engine that runs any agent's harness and memory unmodified, recording the tokens and log probabilities of every model call through an in-container proxy. We port seven benchmarks to SCLATE and compare ten unmodified harness and memory configurations head to head on ten models. The comparison shows that an added memory system does not reliably beat the harness's native memory and that models differ widely in how they use the same harness and memory. We then post-train Qwen3.5-4B through unmodified harnesses and memory systems. The model learns to use both, reading 6.8x fewer file lines with a 16.7-point higher SWE-bench Verified pass rate, and writing richer memory records, while its held-out MetaClaw accuracy rises by up to 11.8 points.

Modern industry-scale data centers need to manage a large number of virtual machines (VMs). Due to the continual creation and release of VMs, many small resource fragments are scattered across physical machines (PMs). To handle these fragments, data centers periodically reschedule some VMs to alternative PMs, a practice commonly referred to as VM rescheduling. Despite the increasing importance of VM rescheduling as data centers grow in size, the problem remains understudied. We first show that, unlike most combinatorial optimization tasks, the inference time of VM rescheduling algorithms significantly influences their performance, due to dynamic VM state changes during this period. This causes existing methods to scale poorly. Therefore, we develop a reinforcement learning system for VM rescheduling, VM2RL, which incorporates a set of customized techniques, such as a two-stage framework that accommodates diverse constraints and workload conditions, a feature extraction module that captures relational information specific to rescheduling, as well as a risk-seeking evaluation enabling users to optimize the trade-off between latency and accuracy. We conduct extensive experiments with data from an industry-scale data center. Our results show that VM2RL can achieve a performance comparable to the optimal solution but with a running time of seconds. Code and datasets are open-sourced: https://github.com/zhykoties/VMR2L_eurosys, https://drive.google.com/drive/folders/1PfRo1cVwuhH30XhsE2Np3xqJn2GpX5qy.

World-Action Models (WAMs) improve robotic manipulation by conditioning action generation on predicted future observations, but future prediction adds further inference overhead to already expensive iterative action generation. Action chunking can amortize this cost over multiple actions, yet performance degrades over long execution horizons because later actions remain conditioned on stale observations. We introduce STAIRCASE POLICY, a streaming inference and training framework that turns a flow-matching VLA into a JEPA-style WAM and partitions a large action chunk into sub-chunks at staggered denoising stages. Near-term actions are executed as soon as they become available, while later actions continue to be refined. At each sub-chunk boundary, the future latent is re-predicted from the latest observation and used to update all unexecuted actions, enabling long-horizon execution without repeated full policy inference. The resulting future-prediction error can further serve as a signal for adaptive chunking. S-WAM achieves 97.7% on LIBERO and 87.9% on LIBERO-Plus, and improves performance across multiple policy backbones and real-robot tasks. It reaches 292.7 executed actions per second, 3.62times the throughput of conventional execution at comparable accuracy, while reducing time-to-first-action from 123.6 to 73.3 ms. With additional inference optimizations, throughput further increases to 642.9 actions per second.

Auto-harness systems such as A-Evolve, GEPA, and Meta-Harness improve LLM agents by optimizing prompts, skills, tools, memories, and supporting infrastructure from execution feedback, but they are typically evaluated on fixed offline benchmarks. Real deployments instead present open-ended task streams: histories grow without a fixed endpoint, heterogeneous tasks require different harnesses, and problem distributions shift over time. These challenges make a single repeatedly and densely updated harness brittle, causing performance degradation as accuracy peaks early and then declines. This motivates sustained harness construction with task-wise adaptation. We introduce Adaptive Auto-Harness, a framework and system for such streams. The framework decomposes the gap to an oracle harness into evolution loss and adaptation loss. The system addresses these losses with a stateful multi-agent evolver, a harness tree with solve-time routing, and human-steering hooks for cases where history lacks the needed signal. Across prediction-market, security-competition, and event-forecasting streams, Adaptive Auto-Harness outperforms five existing auto-harness baselines and ablations attribute gains to better construction, routing, or targeted human steering. Code is available in https://github.com/A-EVO-Lab/AdaptiveHarness .

Large reasoning models that use long chain-of-thought excel at problem-solving yet waste compute on redundant checks. Curbing this overthinking is hard: training-time length penalties can cripple ability, while inference-time early-exit adds system overhead. To bridge this gap, we propose Step-GRPO, a novel post-training framework that internalizes dynamic early-exit capabilities directly into the model. Step-GRPO shifts the optimization objective from raw tokens to semantic steps by utilizing linguistic markers to structure reasoning. We introduce a Dynamic Truncated Rollout mechanism that exposes the model to concise high-confidence trajectories during exploration, synergized with a Step-Aware Relative Reward that dynamically penalizes redundancy based on group-level baselines. Extensive experiments across three model sizes on diverse benchmarks demonstrate that Step-GRPO achieves a superior accuracy-efficiency trade-off. On Qwen3-8B, our method reduces token consumption by 32.0\% compared to the vanilla model while avoiding the accuracy degradation observed in traditional length-penalty methods.

Weight-normalized (WN) training is emerging as a compelling alternative to conventional weight decay (WD), with recent studies reporting substantial pretraining loss gains. We show that these gains are driven primarily by the induced effective learning rate (ELR) trajectory rather than by normalization alone. Matching ELR trajectories largely collapses the training loss dynamics of WN and WD. Schedule design should therefore target ELR rather than the nominal learning rate (LR) alone. Building on this principle, we propose AIR (Affine Inverse-square-Root decay), which combines a theoretically derived 1/t decay with an affine adjustment to satisfy prescribed peak and terminal LRs over a finite training horizon. We further identify late-stage ELR scheduling as a key source of its gains, because a shared late schedule attenuates the effect of earlier LR choices. Experiments on 128 B-token Mixture-of-Experts pretraining demonstrate that AIR outperforms cosine and other candidate schedules in training loss, downstream performance, and hyperparameter robustness, reducing terminal training loss by approximately 0.01 relative to cosine at matched cumulative LR. Applying the same ELR trajectory to WD reproduces the corresponding training dynamics, showing that the benefits extend beyond fixed-norm training and establishing ELR as the principled scheduling object.

Computer-use agents provide a promising path toward general software automation because they can interact directly with arbitrary graphical user interfaces instead of relying on brittle, application-specific integrations. Despite recent advances in benchmark performance, strong computer-use agents remain expensive and slow in practice, since most systems invoke large multimodal models at nearly every interaction step. We argue that this uniform allocation of compute is fundamentally inefficient for long-horizon GUI tasks. Such trajectories are highly heterogeneous: many steps are routine and can be handled reliably by smaller, cheaper policies, while errors tend to concentrate at a relatively small number of high-risk moments. Across computer-use benchmarks, these failures repeatedly take two forms: progress stalls, where the agent loops, repeats ineffective actions, or fails to make meaningful progress, and silent semantic drift, where the agent continues taking locally plausible actions after already deviating from the user's true goal. To address this inefficiency, we propose an event-driven, step-level cascade for computer-use agents that runs a small policy by default and escalates to a stronger model only when lightweight learned monitors detect elevated risk. Our framework combines two complementary signals: a Stuck Monitor that detects degraded progress from recent reasoning-action history and triggers recovery, and a Milestone Monitor that identifies semantically meaningful checkpoints where sparse verification is most informative for catching drift. This design turns always-on frontier-model inference into adaptive, on-demand compute allocation over the course of an evolving interaction. The framework is modular and deployment-oriented: it can be layered on top of existing computer-use agents without changing the underlying agent architecture or retraining the large model.

We propose ADAPT, a meta-learning algorithm that learns task sampling proportions under an explicit token budget for multi-task instruction tuning. Instead of fixing task weights by hand, maintains a continuous distribution over tasks and updates it via meta-gradients of a smooth worst-case validation objective, inducing an adaptive curriculum that allocates more tokens to useful tasks while avoiding collapse. We instantiate ADAPT on three sim1B-parameter open-weight LLMs (Gemma-3-1B, LLaMA-3.2-1B, Qwen-0.6B), training on 20 Natural Instructions task types under budgets of 1%, 5%, and 10% of the available supervised tokens, and compare against strong supervised fine-tuning baselines with uniform and size-proportional mixing. We conduct evaluations on 11 out-of-domain benchmarks spanning reasoning, reading comprehension, code generation, and instruction following, we find that ADAPT matches or slightly improves average downstream performance relative to the best static mixture, while using fewer effective training tokens and reallocating budget toward harder, benchmark-aligned tasks.

The deployment of agent systems in an enterprise environment is often hindered by several challenges: common models lack domain-specific process knowledge, leading to disorganized plans, missing key tools, and poor execution stability. To address this, this paper introduces Routine, a multi-step agent planning framework designed with a clear structure, explicit instructions, and seamless parameter passing to guide the agent's execution module in performing multi-step tool-calling tasks with high stability. In evaluations conducted within a real-world enterprise scenario, Routine significantly increases the execution accuracy in model tool calls, increasing the performance of GPT-4o from 41.1% to 96.3%, and Qwen3-14B from 32.6% to 83.3%. We further constructed a Routine-following training dataset and fine-tuned Qwen3-14B, resulting in an accuracy increase to 88.2% on scenario-specific evaluations, indicating improved adherence to execution plans. In addition, we employed Routine-based distillation to create a scenario-specific, multi-step tool-calling dataset. Fine-tuning on this distilled dataset raised the model's accuracy to 95.5%, approaching GPT-4o's performance. These results highlight Routine's effectiveness in distilling domain-specific tool-usage patterns and enhancing model adaptability to new scenarios. Our experimental results demonstrate that Routine provides a practical and accessible approach to building stable agent workflows, accelerating the deployment and adoption of agent systems in enterprise environments, and advancing the technical vision of AI for Process.

Production scheduling is highly susceptible to dynamic disruptions, such as variations in processing times, machine availability, and unexpected task insertions. Conventional approaches typically rely on event-specific models and explicit analytical formulations, which limits their adaptability and generalization across previously unseen disturbances. To overcome these limitations, this paper proposes DScheLLM, a dynamic scheduling approach that leverages fine-tuned large language models within a dual-system (fast-slow) reasoning architecture to address disturbances of different scales. A unified large language model-based framework is constructed to handle dynamic events, where training datasets for both fast and slow reasoning modes are generated using exact schedules obtained from an operations research solver. The Huawei OpenPangu Embedded-7B model is subsequently fine-tuned under the hybrid reasoning paradigms using LoRA. Experimental evaluations on standard job shop scheduling benchmarks demonstrate that the fast-thinking mode can efficiently generate high-quality schedules and the slow-thinking mode can produce solver-compatible and well-formatted decision inputs. To the best of our knowledge, this work represents one of the earliest studies applying large language models to job shop scheduling in dynamic environments, highlighting their considerable potential for intelligent and adaptive scheduling optimization.

We consider the problem of online preemptive scheduling on a single machine to minimize the total flow time. In clairvoyant scheduling, where job processing times are revealed upon arrival, the Shortest Remaining Processing Time (SRPT) algorithm is optimal. In practice, however, exact processing times are often unknown. At the opposite extreme, non-clairvoyant scheduling, in which processing times are revealed only upon completion, suffers from strong lower bounds on the competitive ratio. This motivates the study of intermediate information models. We introduce a new model in which processing times are revealed gradually during execution. Each job consists of a sequence of operations, and the processing time of an operation becomes known only after the preceding one completes. This models many scheduling scenarios that arise in computing systems. Our main result is a deterministic O(m^2)-competitive algorithm, where m is the maximum number of operations per job. More specifically, we prove a refined competitive ratio in O(m_1 cdot m_2), where m_1 and m_2 are instance-dependent parameters describing the operation size structure. Our algorithm and analysis build on recent advancements in robust flow time minimization (SODA '26), where jobs arrive with estimated sizes. However, in our setting we have no bounded estimate on a job's processing time. Thus, we design a highly adaptive algorithm that gradually explores a job's operations while working on them, and groups them into virtual chunks whose size can be well-estimated. This is a crucial ingredient of our result and requires a much more careful analysis compared to the robust setting. We also provide lower bounds showing that our bounds are essentially best possible. For the special case of scheduling with uniform obligatory tests, we show that SRPT at the operation level is 2-competitive, which is best possible.

Stochastic Gradient Decent (SGD) is one of the core techniques behind the success of deep neural networks. The gradient provides information on the direction in which a function has the steepest rate of change. The main problem with basic SGD is to change by equal sized steps for all parameters, irrespective of gradient behavior. Hence, an efficient way of deep network optimization is to make adaptive step sizes for each parameter. Recently, several attempts have been made to improve gradient descent methods such as AdaGrad, AdaDelta, RMSProp and Adam. These methods rely on the square roots of exponential moving averages of squared past gradients. Thus, these methods do not take advantage of local change in gradients. In this paper, a novel optimizer is proposed based on the difference between the present and the immediate past gradient (i.e., diffGrad). In the proposed diffGrad optimization technique, the step size is adjusted for each parameter in such a way that it should have a larger step size for faster gradient changing parameters and a lower step size for lower gradient changing parameters. The convergence analysis is done using the regret bound approach of online learning framework. Rigorous analysis is made in this paper over three synthetic complex non-convex functions. The image categorization experiments are also conducted over the CIFAR10 and CIFAR100 datasets to observe the performance of diffGrad with respect to the state-of-the-art optimizers such as SGDM, AdaGrad, AdaDelta, RMSProp, AMSGrad, and Adam. The residual unit (ResNet) based Convolutional Neural Networks (CNN) architecture is used in the experiments. The experiments show that diffGrad outperforms other optimizers. Also, we show that diffGrad performs uniformly well for training CNN using different activation functions. The source code is made publicly available at https://github.com/shivram1987/diffGrad.

AI agents execute tens to hundreds of chained LLM calls per task, yet GPU schedulers treat each call as independent, discarding gigabytes of intermediate state between steps and inflating end-to-end latency by 3-8x. We argue that this request-level abstraction is fundamentally mismatched to compound AI workloads, and propose a shift to program-level scheduling: treating the entire agent workflow (not individual inference calls) as the first-class schedulable unit. We present SAGA, a distributed scheduler that implements this abstraction through three mechanisms: (1) Agent Execution Graphs that capture workflow structure to predict KV cache reuse across tool-call boundaries, achieving within 1.31x of Bélády's optimal offline policy; (2) session-affinity batching with work stealing that co-locates correlated requests while maintaining global load balance; and (3) Agent Fair Share, a task-completion-time fairness metric with provable bounded-deviation guarantees. On a 64-GPU cluster serving SWE-bench coding agents and WebArena browser tasks, SAGA reduces task completion time by 1.64x (geometric mean, p < 0.001) over vLLM v0.15.1 with prefix caching and affinity routing, while improving GPU memory utilization by 1.22x and achieving 99.2% SLO attainment under multi-tenant interference. These latency gains come at a quantified cost: approximately 30% lower peak throughput than throughput-optimal batch scheduling, a tradeoff appropriate for the latency-sensitive interactive deployments that dominate compound AI usage. Our results demonstrate that workflow-aware scheduling is essential for efficient compound AI serving.

Inference serving for large language models (LLMs) is the key to unleashing their potential in people's daily lives. However, efficient LLM serving remains challenging today because the requests are inherently heterogeneous and unpredictable in terms of resource and latency requirements, as a result of the diverse applications and the dynamic execution nature of LLMs. Existing systems are fundamentally limited in handling these characteristics and cause problems such as severe queuing delays, poor tail latencies, and SLO violations. We introduce Llumnix, an LLM serving system that reacts to such heterogeneous and unpredictable requests by runtime rescheduling across multiple model instances. Similar to context switching across CPU cores in modern operating systems, Llumnix reschedules requests to improve load balancing and isolation, mitigate resource fragmentation, and differentiate request priorities and SLOs. Llumnix implements the rescheduling with an efficient and scalable live migration mechanism for requests and their in-memory states, and exploits it in a dynamic scheduling policy that unifies the multiple rescheduling scenarios elegantly. Our evaluations show that Llumnix improves tail latencies by an order of magnitude, accelerates high-priority requests by up to 1.5x, and delivers up to 36% cost savings while achieving similar tail latencies, compared against state-of-the-art LLM serving systems. Llumnix is publicly available at https://github.com/AlibabaPAI/llumnix.

World-action models (WAMs) couple predictive visual modeling with action generation, typically relying on iterative denoising with a fixed denoising steps. However, manipulation tasks contain actions chunks with varying sensitivity to generation errors: critical actions require precision, while less sensitive actions allow faster generation with fewer denoising steps. Here we introduce AnyStep World Action Model, a general framework for tunable-budget prediction and scene-dependent computation allocation. Our budget-aligned teacher-trajectory distillation trains interval-conditioned flow maps using explicit frozen-teacher transitions and shared low-rank adapters, supporting action generation from one-step prediction to multi-step refinement. Building on this capability, a lightweight risk-benefit scheduler predicts teacher-curvature-based difficulty and budget-specific student-teacher fidelity from a single one-step preview, selecting the smallest budget predicted to satisfy risk-adaptive fidelity requirements. We evaluate our framework on three widely used WAMs Motus, FastWAM, and LingBotVA using RoboTwin 2.0. Our method reduces average denoising steps by 60.2%, 49.8%, and 85.28%, respectively, while maintaining baseline task success rates. In particular, our AnyStep training substantially improves model performance under a one-step denoising budget, increasing task success rates by 7.07%, 12.08%, and 8.94% on Motus, FastWAM, and LingBotVA, respectively. Experiments on six real-world manipulation tasks further validate its effectiveness.

Language Model (LM) agents have demonstrated remarkable capabilities in solving tasks that require multiple interactions with the environment. However, they remain vulnerable in environments where a single error often leads to irrecoverable failure, particularly under strict feasibility constraints. We systematically analyze existing agent frameworks, identifying imperfect planning and stochastic execution as the primary causes. To address these challenges, we propose Tool-guided Adaptive Planning with constrained Execution (TAPE). TAPE enhances planning capability by aggregating multiple plans into a graph and employing an external solver to identify a feasible path. During execution, TAPE employs constrained decoding to reduce sampling noise, while adaptively re-planning whenever environmental feedback deviates from the intended state. Experiments across Sokoban, ALFWorld, MuSiQue, and GSM8K-Hard demonstrate that TAPE consistently outperforms existing frameworks, with particularly large gains on hard settings, improving success rates by 21.0 percentage points on hard settings on average, and by 20.0 percentage points for weaker base models on average. Code and data available at here.

Reinforcement learning (RL) post-training for large language models (LLMs) coordinates multiple models across generation, inference, and training on GPU clusters. Several factors may change during a run, including resource availability, sequence length, memory pressure, and stage bottlenecks. As a consequence, an execution plan that was initially suitable can then become slow or even infeasible over time. However, adapting a job whose models share GPUs entails significant challenges: deciding whether a new plan is worth the transition cost, reusing the job's distributed state, and coordinating GPU transfers across models and stages. Nereus targets these challenges as a cost-aware runtime that adapts RL post-training jobs into efficient execution plans. Its low-overhead controller selects a memory-feasible global plan and admits the transition using a cost model calibrated against the running job. To estimate and execute a transition, Nereus represents the distributed state of each replica of a model-stage (one model in one stage) as an Elastic Model Unit. It then employs a global transition graph to order the transformations and GPU transfers of these units. In a trace built from real data, online TP/PP adaptation reduces average step latency by 27.7% relative to the initial fixed TP/PP layout with DP scaling. In a 1,000-step run reaching 1,024 GPUs, six transitions consume 0.079% of total run time. Nereus improves end-to-end 8B PPO throughput by 2.14--7.27times over OpenRLHF and by 1.10--1.47times over Verl across diverse clusters.

Agentic reinforcement learning (RL) is emerging as a critical post-training paradigm for improving LLM agent capabilities. Existing RL algorithms for LLMs largely follow the token-centric paradigm as in RLHF and RLVR, where tokens serve as the basic units for modeling and optimization. However, this paradigm introduces a granularity mismatch in agentic RL, as it optimizes token-level predictions while LLM agents make step-level decisions through cycles of environmental observations and actions. To bridge this gap, we propose StepPO, a step-centric paradigm for agentic RL via step-aligned policy optimization. Specifically, we reformulate agentic RL from a token-level Markov Decision Process (MDP) into a step-level MDP, where interaction steps serve as the basic trajectory representations. We further propose step-level credit assignment to align policy optimization with the natural granularity of agent decisions. Together, StepPO optimizes agent policies at the step level for multi-turn agent-environment interaction. Experiments across multi-hop QA, academic paper search, and text-world action tasks show that StepPO consistently outperforms various RL algorithms. Further analyses provide insights into how step-centric paradigm improves agent training. We hope this step-centric paradigm offers a useful lens for understanding agent behavior and a practical path for training more capable LLM agents.

Asynchronous reinforcement learning improves throughput by decoupling rollout generation from optimization, but staleness is an inevitable byproduct compounded by policy lag, engine delays, and mixture-of-experts routing. From a trust-region perspective, this mismatch is critical: training-inference divergence governs approximation error in finite-horizon bounds, whereas PPO clipping only gates sampled outward updates, acting as a sampled surrogate rather than a full-policy constraint. As a result, high-staleness updates remain weakly controlled in the asynchronous regime where stale rollouts matter most. We introduce the Staleness-Adaptive Trust Region (SAT), which uses the detached sampled log-ratio as a practical staleness proxy, identifies high-mismatch tails within each batch via staleness-based kernel scaling, and contracts only the sign-selected endpoint of the nominal PPO interval. This preserves baseline behavior on ordinary tokens while enforcing more conservative updates on newly intercepted outward bands. We prove local interval containment and pointwise pessimism relative to PPO, showing how the adaptive rule reshapes update geometry under heterogeneous staleness. We evaluate SAT in a decoupled asynchronous RL setup built on Qwen3-30B-A3B-Base, using SGLang as the inference engine and Megatron for training. In this setting, SAT-GSPO w/ R3 achieves the best observed AIME24 avg@8, reaching 35.83 at lag 1 and 34.79 at lag 8, while SAT-GSPO reaches 34.17 at lag 1. Adaptive clipping and routing replay act as complementary stabilizers targeting mismatch tails and routing inconsistency, respectively. Overall, aligning clip intervals with staleness heterogeneity effectively stabilizes asynchronous RL.

The current paradigm of test-time scaling relies on generating long reasoning traces ("thinking" more) before producing a response. In agent problems that require interaction, this can be done by generating thinking traces before acting in the world. However, this process does not allow agents to acquire new information from the environment or adapt their behavior over time. In this work, we propose to scale test-time interaction, an untapped dimension of test-time scaling that increases the agent's interaction horizon to enable running rich behaviors such as exploration, backtracking, and dynamic re-planning within a single rollout. To demonstrate the promise of this scaling dimension, we study the domain of web agents. We first show that even prompting-based interaction scaling without any training can improve task success on web benchmarks non-trivially. Building on this, we introduce TTI (Test-Time Interaction), a curriculum-based online reinforcement learning (RL) approach that trains agents by adaptively adjusting their rollout lengths. Using a Gemma 3 12B model, TTI produces state-of-the-art open-source, open-data web agents on WebVoyager and WebArena benchmarks. We further show that TTI enables agents to balance exploration and exploitation adaptively. Our results establish interaction scaling as a powerful, complementary axis to scaling per-step compute, offering new avenues for training adaptive agents.

We formulate and solve the H-SARA Problem, a Vehicle Routing and Appointment Scheduling Problem motivated by home services management. We assume that travel times, service durations, and customer cancellations are stochastic. We use a two-stage process that first generates teams and routes using a VRP Solver with optional extensions and then uses an MC Scheduler that determines expected arrival times by teams at customers. We further introduce two different models of cancellation and their associated impacts on routing and scheduling. Finally, we introduce the Route Fracture Metaheuristic that iteratively improves an H-SARA solution by replacing the worst-performing teams. We present insights into the problem and a series of numerical experiments that illustrate properties of the optimal routing, scheduling, and the impact of the Route Fracture Metaheuristic for both models of cancellation.

The paradigm of automated program generation is shifting from one-shot generation to inference-time search, where Large Language Models (LLMs) function as semantic mutation operators within evolutionary loops. While effective, these systems are currently governed by static schedules that fail to account for the non-stationary dynamics of the search process. This rigidity results in substantial computational waste, as resources are indiscriminately allocated to stagnating populations while promising frontiers remain under-exploited. We introduce AdaEvolve, a framework that reformulates LLM-driven evolution as a hierarchical adaptive optimization problem. AdaEvolve uses an "accumulated improvement signal" to unify decisions across three levels: Local Adaptation, which dynamically modulates the exploration intensity within a population of solution candidates; Global Adaptation, which routes the global resource budget via bandit-based scheduling across different solution candidate populations; and Meta-Guidance which generates novel solution tactics based on the previously generated solutions and their corresponding improvements when the progress stalls. We demonstrate that AdaEvolve consistently outperforms the open-sourced baselines across 185 different open-ended optimization problems including combinatorial, systems optimization and algorithm design problems.

The interrupting swap-allowed blocking job shop problem (ISBJSSP) is a complex scheduling problem that is able to model many manufacturing planning and logistics applications realistically by addressing both the lack of storage capacity and unforeseen production interruptions. Subjected to random disruptions due to machine malfunction or maintenance, industry production settings often choose to adopt dispatching rules to enable adaptive, real-time re-scheduling, rather than traditional methods that require costly re-computation on the new configuration every time the problem condition changes dynamically. To generate dispatching rules for the ISBJSSP problem, a method that uses graph neural networks and reinforcement learning is proposed. ISBJSSP is formulated as a Markov decision process. Using proximal policy optimization, an optimal scheduling policy is learnt from randomly generated instances. Employing a set of reported benchmark instances, we conduct a detailed experimental study on ISBJSSP instances with a range of machine shutdown probabilities to show that the scheduling policies generated can outperform or are at least as competitive as existing dispatching rules with predetermined priority. This study shows that the ISBJSSP, which requires real-time adaptive solutions, can be scheduled efficiently with the proposed machine learning method when production interruptions occur with random machine shutdowns.

Modern diffusion models generate high-quality images and videos, but their iterative denoising process makes inference expensive. Feature caching accelerates sampling by reusing or predicting intermediate activations across neighboring denoising steps, exploiting the redundancy of computations along the reverse trajectory. In this work, we focus on the caching schedule: selecting which denoising steps should be fully recomputed. Existing schedules are either fixed (e.g. uniform) or chosen adaptively from per-step error heuristics; in both cases, the actual compute cost is a side-effect of hand-tuned thresholds rather than a quantity the user can specify. We propose ReCache, which inverts this: given a target budget k, it learns the recomputation schedule that maximizes generation quality, turning compute into a directly controllable input. ReCache trains via policy gradients, sidestepping backpropagation through full diffusion inference, and uses no labelled data. Generations from uncached inference serve as matching targets, paired with a reward for generation quality. ReCache is compatible with any caching mechanism, including feature reuse and feature forecasting; for each mechanism, a single trained policy adapts across computational budgets at inference time. ReCache consistently outperforms scheduling baselines: under a times5.04 FLOPs reduction on FLUX, it reduces LPIPS by 31% (from 0.456 to 0.316) compared to DiCache; on Wan 2.1 at a sim times2.6 speedup, it drops LPIPS by 65% (from 0.480 to 0.169) and boosts the VBench score by 7% (5.6 points, from 70.4 to 76.0) over uniform HiCache. Code is available at https://github.com/thecrazymage/ReCache.

Cloud computing is an attractive technology for providing computing resources over the Internet. Task scheduling is a critical issue in cloud computing, where an efficient task scheduling method can improve overall cloud performance. Since cloud computing is a large-scale and geographically distributed environment, traditional scheduling methods that allocate resources in a centralized manner are ineffective. Besides, traditional methods are difficult to make rational decisions timely when the external environment changes. This paper proposes a decentralized BDI (belief-desire-intention) agent-based scheduling framework for cloud computing. BDI agents have advantages in modelling dynamic environments because BDI agents can update their beliefs, change desires, and trigger behaviours based on environmental changes. Besides, to avoid communication stuck caused by environmental uncertainties, the asynchronous communication mode with a notify listener is employed. The proposed framework covers both the task scheduling and rescheduling stages with the consideration of uncertain events that can interrupt task executions. Two agent-based algorithms are proposed to implement the task scheduling and rescheduling processes, and a novel recommendation mechanism is presented in the scheduling stage to reduce the impact of information synchronization delays. The proposed framework is implemented by JADEX and tested on CloudSim. The experimental results show that our framework can minimize the task makespan, balance the resource utilization in a large-scale environment, and maximize the task success rate when uncertain events occur.

GRPO-based LLM post-training commonly samples multiple trajectories from the same prompt and then trains on the resulting group. In long-context GRPO workloads, this shared prompt-side prefix can contain retrieved passages, visual tokens, tool schemas, system instructions, or task context, while the full rollout group is still too large to pack into one training microbatch. Standard dense trainers therefore recompute the same prefix forward and backward for every trajectory. We present a schedule-level reuse mechanism that decouples prefix and suffix computation. The schedule runs prefix forward once, executes suffixes as ordinary microbatches while reading prefix K/V and accumulating prefix-side gK/gV , and then runs prefix backward once on the accumulated gradient cache. This reordered schedule is equivalent to baseline training over real arithmetic and aligns numerically within finite-precision tolerance. Because only K/V and gK/gV are hot during suffix computation, the approach offloads dormant prefix activations, integrates with TP/EP/CP/PP and DP-style placement at the execution level, and preserves aux-loss-based MoE router semantics through logical prefix-token accounting. On dense Llama3-8B, Qwen3-8B, and MoE Qwen3-MoE-30B-A3B configurations, the schedule matches optimizer updates across TP/CP/PP/EP combinations, aligns on a 100-step real GRPO actor-update trace replay, reaches up to 4.395x speedup (2.930x under a conservative compile-on comparison) as prefix ratio and GRPO group size grow, and reduces Phase-B peak HBM by up to 59.1%, extending the Llama3-8B capacity frontier from 17,920 to 29,696 total tokens.

Replay methods have shown to be successful in mitigating catastrophic forgetting in continual learning scenarios despite having limited access to historical data. However, storing historical data is cheap in many real-world applications, yet replaying all historical data would be prohibited due to processing time constraints. In such settings, we propose learning the time to learn for a continual learning system, in which we learn replay schedules over which tasks to replay at different time steps. To demonstrate the importance of learning the time to learn, we first use Monte Carlo tree search to find the proper replay schedule and show that it can outperform fixed scheduling policies in terms of continual learning performance. Moreover, to improve the scheduling efficiency itself, we propose to use reinforcement learning to learn the replay scheduling policies that can generalize to new continual learning scenarios without added computational cost. In our experiments, we show the advantages of learning the time to learn, which brings current continual learning research closer to real-world needs.

We introduce the Series-Parallel Workflow Decomposition (SP\-WD) heuristic algorithm for the Workflow Scheduling Problem (WSP) decomposition. We demonstrate that the SPWD algorithm facilitates the scheduling of large WSP instances with the hybrid D-Wave Constrained Quadratic Model solver, enabling the scheduling of instances that would otherwise exceed its capacity limitations. We also describe the accompanying execution environment used to obtain the results of the experiments with real-life workflow instances available in the WfCommons standardization initiative repository.

Harness optimization provides a practical setting for recursive self-improvement (RSI), where agent-generated modifications inform subsequent changes through execution feedback. Recent work such as Meta-Harness implements this process through iterative code generation and evaluation, but retains a fixed development set and proposal policy. These constraints channel evolution along a single search trajectory, increasing the risk of converging to a local optimum. We make the improvement process itself adaptive by organizing search into branches with evolving development subsets and proposal policies. Each branch retains development cases solved by more of its leading harnesses than by those of other branches, drops cases solved by every leading harness across all branches, and revises its proposal policy using its own search history. To deploy the resulting complementary harnesses, we propose a router to select one development-selected branch head for each new input before execution. Across mathematical reasoning and agentic coding benchmarks, our system achieves relative improvements over Meta-Harness of 34.8% on Olympiad-level mathematical reasoning, 11.6% on Terminal-Bench 2.0, and 3.8% on SWE-bench Lite, with harness selection and router configuration based solely on development data. These results show that evolving branch objectives and proposal policies can yield complementary harnesses whose strengths a router combines without access to test outcomes.

Agentic systems increasingly solve complex user requests by executing orchestrated workflows, where subtasks are assigned to specialized models or tools and coordinated according to their dependencies. While recent work improves agent efficiency by optimizing the performance--cost--latency frontier, real deployments often impose concrete requirements: a workflow must be completed within a specified budget and before a specified deadline. This shifts the goal from average efficiency optimization to maximizing the probability that the entire workflow completes successfully under explicit budget and deadline constraints. We study constraint-driven online resource allocation for agentic workflows. Given a dependency-structured workflow and estimates of success rates and generation lengths for each subtask--model pair, the executor allocates models and parallel samples across simultaneously executable subtasks while managing the remaining budget and time. We formulate this setting as a finite-horizon stochastic online allocation problem and propose Monte Carlo Portfolio Planning (MCPP), a lightweight closed-loop planner that directly estimates constrained completion probability through simulated workflow executions and replans after observed outcomes. Experiments on CodeFlow and ProofFlow demonstrate that MCPP consistently improves constrained completion probability over strong baselines across a wide range of budget--deadline constraints.

Large Language Model (LLM) workloads have distinct prefill and decode phases with different compute and memory requirements which should ideally be accounted for when scheduling input queries across different LLM instances in a cluster. However existing scheduling algorithms treat LLM workloads as monolithic jobs without considering the distinct characteristics of the two phases in each workload. This leads to sub-optimal scheduling and increased response latency. In this work, we propose a heuristic-guided reinforcement learning-based intelligent router for data-driven and workload-aware scheduling. Our router leverages a trainable response-length predictor, and a novel formulation for estimating the impact of mixing different workloads to schedule queries across LLM instances and achieve over 11\% lower end-to-end latency than existing approaches.

LLMs have achieved remarkable breakthroughs in reasoning, insights, and tool use, but chaining these abilities into extended processes at the scale of those routinely executed by humans, organizations, and societies has remained out of reach. The models have a persistent error rate that prevents scale-up: for instance, recent experiments in the Towers of Hanoi benchmark domain showed that the process inevitably becomes derailed after at most a few hundred steps. Thus, although LLM research is often still benchmarked on tasks with relatively few dependent logical steps, there is increasing attention on the ability (or inability) of LLMs to perform long range tasks. This paper describes MAKER, the first system that successfully solves a task with over one million LLM steps with zero errors, and, in principle, scales far beyond this level. The approach relies on an extreme decomposition of a task into subtasks, each of which can be tackled by focused microagents. The high level of modularity resulting from the decomposition allows error correction to be applied at each step through an efficient multi-agent voting scheme. This combination of extreme decomposition and error correction makes scaling possible. Thus, the results suggest that instead of relying on continual improvement of current LLMs, massively decomposed agentic processes (MDAPs) may provide a way to efficiently solve problems at the level of organizations and societies.

Group-based reinforcement learning (RL), such as GRPO, has advanced the capabilities of large language models on long-horizon agentic tasks. To enable more fine-grained policy updates, recent research has increasingly shifted toward stepwise group-based policy optimization, which treats each step in a rollout trajectory independently while using a memory module to retain historical context. However, we find a key issue in estimating stepwise relative advantages, namely context inconsistency, where steps within the same group may differ in their historical contexts. Empirically, we reveal that this issue can lead to severely biased advantage estimation, thereby degrading policy optimization significantly. To address the issue, in this paper, we propose Hierarchy-of-Groups Policy Optimization (HGPO) for long-horizon agentic tasks. Specifically, within a group of rollout trajectories, HGPO assigns each step to multiple hierarchical groups according to the consistency of historical contexts. Then, for each step, HGPO computes distinct advantages within each group and aggregates them with an adaptive weighting scheme. In this way, HGPO can achieve a favorable bias-variance trade-off in stepwise advantage estimation, without extra models or rollouts. Evaluations on two challenging agentic tasks, ALFWorld and WebShop with Qwen2.5-1.5B-Instruct and Qwen2.5-7B-Instruct, show that HGPO significantly outperforms existing agentic RL methods under the same computational constraints. Code is available at https://github.com/langfengQ/verl-agent/tree/master/recipe/hgpo.

Reinforcement learning has empowered large language models to act as intelligent agents, yet training them for long-horizon tasks remains challenging due to the scarcity of high-quality trajectories, especially under limited resources. Existing methods typically scale up rollout sizes and indiscriminately allocate computational resources among intermediate steps. Such attempts inherently waste substantial computation budget on trivial steps while failing to guarantee sample quality. To address this, we propose Spark (Strategic Policy-Aware exploRation via Key-state dynamic branching), a novel framework that selectively branches at critical decision states for resource-efficient exploration. Our key insight is to activate adaptive branching exploration at critical decision points to probe promising trajectories, thereby achieving precise resource allocation that prioritizes sampling quality over blind coverage. This design leverages the agent's intrinsic decision-making signals to reduce dependence on human priors, enabling the agent to autonomously expand exploration and achieve stronger generalization. Experiments across diverse tasks (e.g., embodied planning), demonstrate that Spark achieves superior success rates with significantly fewer training samples, exhibiting robust generalization even in unseen scenarios.

Computer-use agents (CUAs) automate tasks specified with natural language such as "order the cheapest item from Taco Bell" by generating sequences of calls to tools such as click, type, and scroll on a browser. Current implementations follow a sequential fetch-screenshot-execute loop where each iteration requires an LLM call, resulting in high latency and frequent errors from incorrect tool use. We present agent just-in-time (JIT) compilation, a system that compiles task descriptions directly into executable code that may include LLM calls, tool calls, and parallelization. Our approach comprises three components: (1) JIT-Planner, which generates multiple code plans, validates each against tool specifications, and selects the minimum-cost candidate; (2) JIT-Scheduler, which explores parallelization strategies via Monte Carlo cost estimation from learned latency distributions; and (3) an invariant-enforcing tool protocol specifying precondition and postcondition requirements to reduce the rate of incorrect tool use. Across five applications, JIT-Planner achieves 10.4times speedup and 28% higher accuracy over Browser-Use, while JIT-Scheduler achieves 2.4times speedup and 9\% higher accuracy over OpenAI CUA.

We present AI-SARAH, a practical variant of SARAH. As a variant of SARAH, this algorithm employs the stochastic recursive gradient yet adjusts step-size based on local geometry. AI-SARAH implicitly computes step-size and efficiently estimates local Lipschitz smoothness of stochastic functions. It is fully adaptive, tune-free, straightforward to implement, and computationally efficient. We provide technical insight and intuitive illustrations on its design and convergence. We conduct extensive empirical analysis and demonstrate its strong performance compared with its classical counterparts and other state-of-the-art first-order methods in solving convex machine learning problems.

Effective multi-user delay-constrained scheduling is crucial in various real-world applications, including embodied AI, instant messaging, live streaming, and data center management, where efficient resource allocation is required among users with diverse delay sensitivities. In these scenarios, schedulers must make real-time decisions to satisfy both delay and resource constraints without prior knowledge of system dynamics, which are often time-varying and challenging to estimate. {Current learning-based methods typically require online interactions with actual systems during the training stage. Therefore, these approaches are often difficult or impractical, as they can significantly degrade system performance and incur substantial service costs.} To address these challenges, we propose a novel offline reinforcement learning-based algorithm, named Scheduling By Offline Learning with Critic Guidance and Diffusion Model (SOCD), to learn efficient scheduling policies purely from pre-collected offline data. SOCD innovatively employs a diffusion policy, complemented by a sampling-free critic network for policy guidance. By integrating the Lagrangian multiplier optimization into the offline reinforcement learning, SOCD efficiently trains high-quality constraint-aware policies exclusively from available datasets, eliminating the need for online interactions with the system. Experimental results demonstrate that SOCD is resilient to various system dynamics, including partially observable and large-scale environments, and delivers superior performance compared to existing methods.

Diffusion models deliver high-fidelity synthesis but remain slow due to iterative sampling. We empirically observe there exists feature invariance in deterministic sampling, and present InvarDiff, a training-free acceleration method that exploits the relative temporal invariance across timestep-scale and layer-scale. From a few deterministic runs, we compute a per-timestep, per-layer, per-module binary cache plan matrix and use a re-sampling correction to avoid drift when consecutive caches occur. Using quantile-based change metrics, this matrix specifies which module at which step is reused rather than recomputed. The same invariance criterion is applied at the step scale to enable cross-timestep caching, deciding whether an entire step can reuse cached results. During inference, InvarDiff performs step-first and layer-wise caching guided by this matrix. When applied to DiT and FLUX, our approach reduces redundant compute while preserving fidelity. Experiments show that InvarDiff achieves 2-3times end-to-end speed-ups with minimal impact on standard quality metrics. Qualitatively, we observe almost no degradation in visual quality compared with full computations.

As executable environments for language agents scale, generating and verifying their rollouts becomes increasingly expensive. Under finite rollout budgets, this raises an important question: can data management at the environment level make agentic reinforcement learning (RL) more efficient by organizing, evaluating, and scheduling task instances together with the environments that determine their tools, states, transitions, and verification? To address this question, we introduce EnvSched (Environment-aware Scheduling), an online scheduler that learns from rollout history. EnvSched assigns scheduling value through two complementary modeling choices: exploitation prioritizes tasks likely to provide informative reward differences, while coverage spreads each batch across underobserved environments and interaction patterns. EnvSched organizes environment--task pairs as nodes in a dual-relation graph, with within-environment edges capturing task semantics and shared tool, state, and verifier structure, and cross-environment edges capturing abstract execution and reward topology. By propagating historical rollout statistics along both edge types, it predicts within-task reward variance. These predictions guide a scheduler that allocates each batch to tasks with high predicted reward variance and underobserved environments and tasks. Environment quotas and a similarity penalty further limit concentration and redundancy, yielding informative and diverse batches without additional pilot rollouts. In RL on Qwen3-8B, EnvSched achieves an average score of 48.81 across BFCL-v3, tau-Bench, and ACEBench-Agent after 40 training steps, exceeding the highest score attained by random task selection after 120 steps. It also improves downstream performance across model sizes at the same training budget.

Large-scale LLM pretraining now runs across 10^5--10^6 accelerators, making failures routine and elasticity mandatory. We posit that an elastic-native training system must jointly deliver (i) parameter consistency, (ii) low mean time to recovery (MTTR), (iii) high post-change throughput, and (iv) computation consistency. No prior system achieves all four simultaneously. To achieve these goals, we present ElasWave, which delivers per-step fault tolerance via multi-dimensional scheduling across graph, dataflow, DVFS, and RNG. ElasWave reshapes and reshards micro-batches while preserving the global batch size and gradient scale. It performs online pipeline resharding with asynchronous parameter migration and interleaves ZeRO partitions, reducing parameter recovery processes to disjoint rank-to-rank transfers. It further leverages DVFS to absorb pipeline bubbles and reshards RNG to keep computation consistency. Together, a dynamic communicator enables in-place communication group edits, while per-step in-memory snapshots support online verification and redistribution. We evaluate ElasWave on 96 NPUs and benchmark it against state-of-the-art baselines: throughput improves by 1.35times over ReCycle and 1.60times over TorchFT; communicator recovery completes within one second (up to 82times/3.6times faster than full/partial rebuilds); migration MTTR drops by as much as 51%; and convergence deviation is reduced by approximately 78%.

We address the problem of optimizing a Brownian motion. We consider a (random) realization W of a Brownian motion with input space in [0,1]. Given W, our goal is to return an ε-approximation of its maximum using the smallest possible number of function evaluations, the sample complexity of the algorithm. We provide an algorithm with sample complexity of order log^2(1/ε). This improves over previous results of Al-Mharmah and Calvin (1996) and Calvin et al. (2017) which provided only polynomial rates. Our algorithm is adaptive---each query depends on previous values---and is an instance of the optimism-in-the-face-of-uncertainty principle.

Flow-based vision-language-action (VLA) models excel in embodied control but suffer from intractable likelihoods during multi-step sampling, hindering online reinforcement learning. We propose \textit{boldsymbolπ-StepNFT} (Step-wise Negative-aware Fine-Tuning), a critic-and-likelihood-free framework that requires only a single forward pass per optimization step and eliminates auxiliary value networks. We identify that wider exploration spaces necessitate finer-grained, step-wise guidance for alignment. Empirically, π-StepNFT unlocks latent potential on LIBERO with competitive few-shot robustness. Moreover, it achieves superior generalization on ManiSkill, outperforming value-based baselines in OOD scenarios by preventing overfitting to multimodal features. This property offers a scalable solution promising for complex real-world applications.

The emergence of Large Language Models (LLMs) like ChatGPT has inspired the development of LLM-based agents capable of addressing complex, real-world tasks. However, these agents often struggle during task execution due to methodological constraints, such as error propagation and limited adaptability. To address this issue, we propose a multi-agent framework based on dynamic Task Decomposition and Agent Generation (TDAG). This framework dynamically decomposes complex tasks into smaller subtasks and assigns each to a specifically generated subagent, thereby enhancing adaptability in diverse and unpredictable real-world tasks. Simultaneously, existing benchmarks often lack the granularity needed to evaluate incremental progress in complex, multi-step tasks. In response, we introduce ItineraryBench in the context of travel planning, featuring interconnected, progressively complex tasks with a fine-grained evaluation system. ItineraryBench is designed to assess agents' abilities in memory, planning, and tool usage across tasks of varying complexity. Our experimental results reveal that TDAG significantly outperforms established baselines, showcasing its superior adaptability and context awareness in complex task scenarios.

Scaling laws are used to plan multi-million-dollar training runs, but fitting those laws can itself cost millions. In modern large-scale workflows, assembling a sufficiently informative set of pilot experiments is already a major budget-allocation problem rather than a routine preprocessing step. We formulate scaling-law fitting as budget-aware sequential experimental design: given a finite pool of runnable experiments with heterogeneous costs, choose which runs to execute so as to maximize extrapolation accuracy in a high-cost target region. We then propose an uncertainty-aware method for sequentially allocating experimental budget toward the runs most useful for target-region extrapolation. Across a diverse benchmark of scaling-law tasks, our method consistently outperforms classical design-based baselines, and often approaches the performance of fitting on the full experimental set while using only about 10% of the total training budget. Our code is available at https://github.com/PlanarG/active-sl.

Timestep sampling p(t) is a central design choice in Flow Matching models, yet common practice increasingly favors static middle-biased distributions (e.g., Logit-Normal). We show that this choice induces a speed--quality trade-off: middle-biased sampling accelerates early convergence but yields worse asymptotic fidelity than Uniform sampling. By analyzing per-timestep training losses, we identify a U-shaped difficulty profile with persistent errors near the boundary regimes, implying that under-sampling the endpoints leaves fine details unresolved. Guided by this insight, we propose Curriculum Sampling, a two-phase schedule that begins with middle-biased sampling for rapid structure learning and then switches to Uniform sampling for boundary refinement. On CIFAR-10, Curriculum Sampling improves the best FID from 3.85 (Uniform) to 3.22 while reaching peak performance at 100k rather than 150k training steps. Our results highlight that timestep sampling should be treated as an evolving curriculum rather than a fixed hyperparameter.

Recent studies in using deep reinforcement learning (DRL) to solve Job-shop scheduling problems (JSSP) focus on construction heuristics. However, their performance is still far from optimality, mainly because the underlying graph representation scheme is unsuitable for modelling partial solutions at each construction step. This paper proposes a novel DRL-guided improvement heuristic for solving JSSP, where graph representation is employed to encode complete solutions. We design a Graph Neural-Network-based representation scheme, consisting of two modules to effectively capture the information of dynamic topology and different types of nodes in graphs encountered during the improvement process. To speed up solution evaluation during improvement, we present a novel message-passing mechanism that can evaluate multiple solutions simultaneously. We prove that the computational complexity of our method scales linearly with problem size. Experiments on classic benchmarks show that the improvement policy learned by our method outperforms state-of-the-art DRL-based methods by a large margin.

In modern agentic AI training, the system bottleneck is shifting from rollout to update. Emerging sampling strategies such as tree-structured and step-wise RL greatly increase training sample volume while incurring relatively low marginal rollout cost, causing the update phase to dominate the end-to-end execution time. Crucially, this shift exposes a new optimization opportunity, as production traces reveal substantial prefix redundancy across training samples. In this paper, we propose psRL (prefix sharing for RL), a new training system for agentic AI designed to exploit prefix redundancy among training samples. Leveraging the global visibility and data immutability inherent to the update phase, psRL achieves efficient workload scheduling and memory management for distributed training. Specifically, psRL introduces two novel prefix-sharing mechanisms that enable flexible, fine-grained workload distribution across GPU workers, simultaneously optimizing prefix reuse and achieving load balancing. Moreover, psRL implements a new underlying KV cache manager that facilitates adaptable block-size allocation and dynamic KV caching, maximizing memory utilization while maintaining a high prefix hit rate. Evaluations using production traces demonstrate that psRL outperforms existing systems by up to 5.2x in throughput. The source code will be publicly available soon.

Fast changing states or volatile environments pose a significant challenge to online optimization, which needs to perform rapid adaptation under limited observation. In this paper, we give query and regret optimal bandit algorithms under the strict notion of strongly adaptive regret, which measures the maximum regret over any contiguous interval I. Due to its worst-case nature, there is an almost-linear Omega(|I|^{1-epsilon}) regret lower bound, when only one query per round is allowed [Daniely el al, ICML 2015]. Surprisingly, with just two queries per round, we give Strongly Adaptive Bandit Learner (StABL) that achieves O(n|I|) adaptive regret for multi-armed bandits with n arms. The bound is tight and cannot be improved in general. Our algorithm leverages a multiplicative update scheme of varying stepsizes and a carefully chosen observation distribution to control the variance. Furthermore, we extend our results and provide optimal algorithms in the bandit convex optimization setting. Finally, we empirically demonstrate the superior performance of our algorithms under volatile environments and for downstream tasks, such as algorithm selection for hyperparameter optimization.

The rapid growth of Internet of Things (IoT) devices produces massive, heterogeneous data streams, demanding scalable and efficient scheduling in cloud environments to meet latency, energy, and Quality-of-Service (QoS) requirements. Existing scheduling methods often lack adaptability to dynamic workloads and network variability inherent in IoT-cloud systems. This paper presents a novel hybrid scheduling algorithm combining deep Reinforcement Learning (RL) and Ant Colony Optimization (ACO) to address these challenges. The deep RL agent utilizes a model-free policy-gradient approach to learn adaptive task allocation policies responsive to real-time workload fluctuations and network states. Simultaneously, the ACO metaheuristic conducts a global combinatorial search to optimize resource distribution, mitigate congestion, and balance load across distributed cloud nodes. Extensive experiments on large-scale synthetic IoT datasets, reflecting diverse workloads and QoS constraints, demonstrate that the proposed method achieves up to 18.4% reduction in average response time, 12.7% improvement in resource utilization, and 9.3% decrease in energy consumption compared to leading heuristics and RL-only baselines. Moreover, the algorithm ensures strict Service Level Agreement (SLA) compliance through deadline-aware scheduling and dynamic prioritization. The results confirm the effectiveness of integrating model-free RL with swarm intelligence for scalable, energy-efficient IoT data scheduling, offering a promising approach for next-generation IoT-cloud platforms.

Diffusion Policy (DP) excels in embodied control but suffers from high inference latency and computational cost due to multiple iterative denoising steps. Existing diffusion model (DMs) acceleration methods improve inference speed by reducing computational overhead, as DMs for image generation are computation-bound. In this work, we reveal that DP are I/O bound, and thus propose using speculative decoding, a parallel computing framework, to accelerate DP for the first time. However, it is non-trivial to address the following challenges: (1) How to preserve the denoising quality of the base model at reduced computational cost under time-varying task difficulty in embodied settings; and (2) How to dynamically allocate computation according to task difficulty in such environments. Therefore, we propose Temporal-aware Reinforcement-based Speculative Diffusion Policy (TS-DP), the first framework that enables speculative decoding for DP with temporal adaptivity. First, to handle dynamic environments where task difficulty varies over time, we distill a Transformer-based drafter to imitate the base model and replace its costly denoising calls. Second, an RL-based scheduler further adapts to the time-varying task difficulty by adjusting speculative parameters to maintain accuracy while improving efficiency. Extensive experiments show that TS-DP achieves up to a 4.17x NFE reduction and a 3.2x wall-clock speedup with a draft acceptance rate of over 85% in simulation. Real-world experiments further demonstrate a 3.8x NFE reduction while improving success rates on real-time tasks (e.g., a 23% gain on the conveyor-belt task), reaching an inference frequency of 26 Hz and enabling real-time control while maintaining comparable task performance. The code is available at https://github.com/ChildTang/TS-DP.

Constant-step stochastic approximation generally has a nonzero stationary mean error that persists under time averaging. This paper studies that error for nonlinear two-timescale recursions driven by an exogenous finite-state Markov chain. Under stated smoothness assumptions and conditions on the stationary distribution, we derive a first-order bias expansion whose error bound remains uniform as the slow step size becomes much smaller than the fast step size. Fast-manifold coordinates keep the associated covariance equation regular in this limit. For fast step η and slow step varepsilon, the expansion reveals a mixed contribution varepsilon^2/η alongside terms linear in each step size. This dependence matters for bias reduction: along power-law step-size paths, the bias exponents need not be integers, so Richardson--Romberg extrapolation requires weights matched to the path. An exactly solvable nonlinear Markov example verifies the coefficients. We verify localization for temporal-difference learning and compare finite-run extrapolation at equal update budgets. For finite runs, we bound the initialization error of tail averages on both timescales under an additional coupling assumption. In the special case of additive independent noise, signed third-moment cancellation yields a sharper remainder.

Policy gradient methods rely on a baseline to measure the relative advantage of an action, ensuring the model reinforces behaviors that outperform its current average capability. In the training of Large Language Models (LLMs) using Actor-Critic methods (e.g., PPO), this baseline is typically estimated by a Value Model (Critic) often as large as the policy model itself. However, as the policy continuously evolves, the value model requires expensive, synchronous incremental training to accurately track the shifting capabilities of the policy. To avoid this overhead, Group Relative Policy Optimization (GRPO) eliminates the coupled value model by using the average reward of a group of rollouts as the baseline; yet, this approach necessitates extensive sampling to maintain estimation stability. In this paper, we propose V_0, a Generalist Value Model capable of estimating the expected performance of any model on unseen prompts without requiring parameter updates. We reframe value estimation by treating the policy's dynamic capability as an explicit context input; specifically, we leverage a history of instruction-performance pairs to dynamically profile the model, departing from the traditional paradigm that relies on parameter fitting to perceive capability shifts. Focusing on value estimation at State Zero (i.e., the initial prompt, hence V_0), our model serves as a critical resource scheduler. During GRPO training, V_0 predicts success rates prior to rollout, allowing for efficient sampling budget allocation; during deployment, it functions as a router, dispatching instructions to the most cost-effective and suitable model. Empirical results demonstrate that V_0 significantly outperforms heuristic budget allocation and achieves a Pareto-optimal trade-off between performance and cost in LLM routing tasks.

The expanding computational costs and limited resources underscore the critical need for budgeted-iteration training, which aims to achieve optimal learning within predetermined iteration budgets.While learning rate schedules fundamentally govern the performance of different networks and tasks, particularly in budgeted-iteration scenarios, their design remains largely heuristic, lacking theoretical foundations.In addition, the optimal learning rate schedule requires extensive trial-and-error selection, making the training process inefficient.In this work, we propose the Unified Budget-Aware (UBA) schedule, a theoretically grounded learning rate schedule that consistently outperforms commonly-used schedules among diverse architectures and tasks under different constrained training budgets.First, we bridge the gap by constructing a novel training budget-aware optimization framework, which explicitly accounts for the robustness to landscape curvature variations.From this framework, we derive the UBA schedule, controlled by a single hyper-parameter varphi that provides a trade-off between flexibility and simplicity, eliminating the need for per-network numerical optimization. Moreover, we establish a theoretical connection between varphi and the condition number, adding interpretation and justification to our approach. Besides, we prove the convergence for different values of varphi.We offer practical guidelines for its selection via theoretical analysis and empirical results.xtensive experimental results show that UBA consistently surpasses the commonly-used schedules across diverse vision and language tasks, spanning network architectures (e.g., ResNet, OLMo) and scales, under different training-iteration budgets.

Recent advances in leveraging the agentic paradigm of large language models (LLMs) utilization have significantly enhanced Text-to-SQL capabilities, enabling users without specialized database expertise to query data intuitively. However, deploying these agentic LLM-based Text-to-SQL systems in production poses substantial challenges due to their inherently multi-stage workflows, stringent latency constraints, and potentially heterogeneous GPU infrastructure in enterprise environments. Current LLM serving frameworks lack effective mechanisms for handling interdependent inference tasks, dynamic latency variability, and resource heterogeneity, leading to suboptimal performance and frequent service-level objective (SLO) violations. In this paper, we introduce HEXGEN-TEXT2SQL, a novel framework designed explicitly to schedule and execute agentic multi-stage LLM-based Text-to-SQL workflows on heterogeneous GPU clusters that handle multi-tenant end-to-end queries. HEXGEN-TEXT2SQL introduce a hierarchical scheduling approach combining global workload-balanced task dispatching and local adaptive urgency-guided prioritization, guided by a systematic analysis of agentic Text-to-SQL workflows. Additionally, we propose a lightweight simulation-based method for tuning critical scheduling hyperparameters, further enhancing robustness and adaptability. Our extensive evaluation on realistic Text-to-SQL benchmarks demonstrates that HEXGEN-TEXT2SQL significantly outperforms state-of-the-art LLM serving frameworks. Specifically, HEXGEN-TEXT2SQL reduces latency deadlines by up to 1.67times (average: 1.41times) and improves system throughput by up to 1.75times (average: 1.65times) compared to vLLM under diverse, realistic workload conditions. Our code is available at https://github.com/Relaxed-System-Lab/Hexgen-Flow.

Recent work has explored optimizing image signal processing (ISP) pipelines for various tasks by composing predefined modules and adapting them to task-specific objectives. However, jointly optimizing module sequences and parameters remains challenging. Existing approaches rely on neural architecture search (NAS) or step-wise reinforcement learning (RL), but NAS suffers from a training-inference mismatch, while step-wise RL leads to unstable training and high computational overhead due to stage-wise decision-making. We propose POS-ISP, a sequence-level RL framework that formulates modular ISP optimization as a global sequence prediction problem. Our method predicts the entire module sequence and its parameters in a single forward pass and optimizes the pipeline using a terminal task reward, eliminating the need for intermediate supervision and redundant executions. Experiments across multiple downstream tasks show that POS-ISP improves task performance while reducing computational cost, highlighting sequence-level optimization as a stable and efficient paradigm for task-aware ISP. The project page is available at https://w1jyun.github.io/POS-ISP

Diffusion and flow-matching schedules control the signal and noise coefficients that mix data and noise along affine probability paths. Minimizing a kinetic action defined on coefficient paths, motivated by optimal transport, helps explain strong baselines but remains model-agnostic and ignores prediction error. Here we introduce a model-aware schedule construction based on fiberwise optimal transport. At a fixed time and state on the probability path, compatible signal/noise decompositions form an affine fiber. We define a fiberwise prediction risk by averaging optimal-transport costs between the true and predictor-induced decompositions within these fibers. On a fixed coefficient curve, combining this risk with coefficient-path kinetic action yields a closed-form optimal time allocation. This construction extends to general linear prediction targets, and the risk profile can be estimated from an early baseline checkpoint. We evaluate DDPMs and flow matching across prediction targets, training configurations, risk-estimation checkpoints, datasets, and architectures. Our model-aware schedules consistently outperform strong baselines, including a 38.6% relative FID reduction for flow matching on CIFAR-10 at 16 function evaluations. Each model-agnostic kinetic baseline determines its own kinetic reference coordinate. In these coordinates, fiberwise-risk profiles from independently trained models in different settings align closely after normalization to unit area. The resulting schedule deformations used in training also align, suggesting empirical universality across the evaluated models and settings. Pretrained-checkpoint diagnostics extend this normalized-risk agreement to larger conditional latent diffusion and 2-RF models. A frozen analytic allocation template retains most of the model-aware improvement without further risk estimation or model-specific fitting.

The self-attention mechanism (SAM) is widely used in various fields of artificial intelligence and has successfully boosted the performance of different models. However, current explanations of this mechanism are mainly based on intuitions and experiences, while there still lacks direct modeling for how the SAM helps performance. To mitigate this issue, in this paper, based on the dynamical system perspective of the residual neural network, we first show that the intrinsic stiffness phenomenon (SP) in the high-precision solution of ordinary differential equations (ODEs) also widely exists in high-performance neural networks (NN). Thus the ability of NN to measure SP at the feature level is necessary to obtain high performance and is an important factor in the difficulty of training NN. Similar to the adaptive step-size method which is effective in solving stiff ODEs, we show that the SAM is also a stiffness-aware step size adaptor that can enhance the model's representational ability to measure intrinsic SP by refining the estimation of stiffness information and generating adaptive attention values, which provides a new understanding about why and how the SAM can benefit the model performance. This novel perspective can also explain the lottery ticket hypothesis in SAM, design new quantitative metrics of representational ability, and inspire a new theoretic-inspired approach, StepNet. Extensive experiments on several popular benchmarks demonstrate that StepNet can extract fine-grained stiffness information and measure SP accurately, leading to significant improvements in various visual tasks.

Efficient differential equation solvers have significantly reduced the sampling time of diffusion models (DMs) while retaining high sampling quality. Among these solvers, exponential integrators (EI) have gained prominence by demonstrating state-of-the-art performance. However, existing high-order EI-based sampling algorithms rely on degenerate EI solvers, resulting in inferior error bounds and reduced accuracy in contrast to the theoretically anticipated results under optimal settings. This situation makes the sampling quality extremely vulnerable to seemingly innocuous design choices such as timestep schedules. For example, an inefficient timestep scheduler might necessitate twice the number of steps to achieve a quality comparable to that obtained through carefully optimized timesteps. To address this issue, we reevaluate the design of high-order differential solvers for DMs. Through a thorough order analysis, we reveal that the degeneration of existing high-order EI solvers can be attributed to the absence of essential order conditions. By reformulating the differential equations in DMs and capitalizing on the theory of exponential integrators, we propose refined EI solvers that fulfill all the order conditions, which we designate as Refined Exponential Solver (RES). Utilizing these improved solvers, RES exhibits more favorable error bounds theoretically and achieves superior sampling efficiency and stability in practical applications. For instance, a simple switch from the single-step DPM-Solver++ to our order-satisfied RES solver when Number of Function Evaluations (NFE) =9, results in a reduction of numerical defects by 25.2% and FID improvement of 25.4% (16.77 vs 12.51) on a pre-trained ImageNet diffusion model.

Large Language Models (LLMs) are increasingly deployed in both latency-sensitive online services and cost-sensitive offline workloads. Co-locating these workloads on shared serving instances can improve resource utilization, but directly applying this approach to Prefill/Decode (P/D) disaggregated systems introduces severe load imbalance, as fluctuating request mixes alter the intrinsic P/D ratio. Existing dynamic adjustment techniques cannot keep up with the bursty traffic patterns of online services. We propose a latency-constraint disaggregated architecture, which separates cluster resources into latency-strict and latency-relaxed pools based on task latency requirements. This design enables flexible placement of offline decode tasks, mitigating P/D imbalance while preserving online performance. To fully exploit this flexibility, we propose (1) a bottleneck-based scheduler guided by a Roofline-based performance model for performance bottleneck based scheduling, and (2) a fast preemption mechanism that strictly enforces Service Level Objectives (SLOs) for online requests. Experiments on real-world traces show that compared to existing offline system approaches, our method improves offline throughput by up to 3x, while maintaining online request SLOs.

Request scheduling is a key challenge in large-scale clusters serving agentic large language model (LLM) workloads. An effective scheduler must preserve key-value cache (KVC) reuse across long, shared prefixes, meet token-level latency service-level objectives (SLOs), and minimize GPU resource footprint. Existing schedulers struggle to reconcile these requirements: request consolidation can sacrifice cache locality and increase prefill/decode interference, compromising both SLO attainment and resource efficiency. We present PackServe, a scheduler designed to reduce resource costs while meeting latency SLOs for agentic LLM serving. PackServe uses compact white-box models to predict latency under prefill/decode interference. Guided by these predictions, it packs requests onto fewer serving instances while preserving KVC reuse and SLO constraints, trading available latency headroom for improved per-instance throughput. Evaluation on 64 NVIDIA H20 GPUs shows that PackServe uses up to 16.8% and 24.6% fewer GPU-hours than state-of-the-art schedulers under 30-ms and 50-ms TPOT targets, respectively, while meeting the target TPOT objectives. PackServe has also been deployed in our production cluster comprising over 1000 GPUs, where it reduces the resource footprint by 34.7% compared with the original production scheduler.

Training vision-language web agents with multi-step RL is compute-intensive, with two dominant forms of inefficiency: idle GPUs in synchronous RL, and trajectories that use more steps and tokens than necessary. We present AsyncWebRL, which addresses both. On the system side, an asynchronous design overlaps rollout, gradient update, and policy refresh across iterations, paired with two web-agent-specific adaptations, namely an everlasting rollout pool and lightweight screenshot handling, that together deliver up to a 2.9times end-to-end training-throughput speedup over the previously fastest open synchronous pipeline (WebGym). On the algorithmic side, we identify the per-trajectory normalizer 1/|τ_i| in multi-step GRPO as the root cause of trajectory-level and token-level inefficiency: because failures are systematically longer than successes, it down-weights the negative gradient on failed tokens, so the policy keeps producing verbose memory schemas. Replacing 1/|τ_i| with a constant 1/k breaks this coupling, contracting trajectories while preserving aggregate success. Together, these contributions set a new open-source state of the art on the WebGym out-of-distribution test split (+5.8% relative over the 42.9% prior best), with the largest gains on the harder slices (+42% relative on Medium, +48% relative on Hard).

Recent advances in group-based reinforcement learning (RL) have driven frontier large language models (LLMs) in single-turn tasks like mathematical reasoning. However, their scalability to long-horizon LLM agent training remains limited. Unlike static tasks, agent-environment interactions unfold over many steps and often yield sparse or delayed rewards, making credit assignment across individual steps significantly more challenging. In this work, we propose Group-in-Group Policy Optimization (GiGPO), a novel RL algorithm that achieves fine-grained credit assignment for LLM agents while preserving the appealing properties of group-based RL: critic-free, low memory, and stable convergence. GiGPO introduces a two-level structure for estimating relative advantage: (i) At the episode-level, GiGPO computes macro relative advantages based on groups of complete trajectories; (ii) At the step-level, GiGPO introduces an anchor state grouping mechanism that retroactively constructs step-level groups by identifying repeated environment states across trajectories. Actions stemming from the same state are grouped together, enabling micro relative advantage estimation. This hierarchical structure effectively captures both global trajectory quality and local step effectiveness without relying on auxiliary models or additional rollouts. We evaluate GiGPO on two challenging agent benchmarks, ALFWorld and WebShop, using Qwen2.5-1.5B-Instruct and Qwen2.5-7B-Instruct. Crucially, GiGPO delivers fine-grained per-step credit signals and achieves performance gains of > 12\% on ALFWorld and > 9\% on WebShop over the GRPO baseline: all while maintaining the same GPU memory overhead, identical LLM rollout, and incurring little to no additional time cost.

Vision-Language-Action (VLA) models provide a unified paradigm for robotic manipulation, yet their real-world deployment is often bottlenecked by execution efficiency. While existing efforts predominantly focus on compute-centric efficiency to reduce per-step inference latency, the intrinsic policy efficiency of these models remains largely unexplored. Policy efficiency is fundamentally affected by two factors, namely the effective executable length of predicted action chunks and the total physical steps required to complete a task. These two factors jointly determine the total number of forward inference calls during execution. We observe that current VLA policies struggle with planning unreliability and action redundancy, suffering from severe prediction degradation at the tail of action chunks and tending to generate unnecessarily redundant physical steps. To address this, we propose PolicyTrim, a reinforcement learning-based post-training framework that extends the reliable action chunk length and reduces redundant physical steps. For reliable chunk extension, we employ a dynamic exploration strategy that explicitly rewards the successful completion of longer executable lengths, progressively pushing the trustworthy prediction horizon to its empirical limit. For step efficiency, we design a redundancy-aware reward that directly favors successful task completions with fewer steps while penalizing unreproducible shortcuts, effectively eliminating redundant physical actions. Extensive experiments across three benchmarks and three VLA models demonstrate that PolicyTrim improves action chunk utilization by 3times and reduces physical execution steps by 51.4\%. Ultimately, our framework delivers up to a 5.83times end-to-end deployment speedup without compromising task success rates.

The integration of Large Language Models (LLMs) into applications ranging from interactive chatbots to multi-agent systems has introduced a wide spectrum of service-level objectives (SLOs) for responsiveness. These include latency-sensitive requests emphasizing per-token latency in streaming chat, deadline-sensitive requests requiring rapid full responses to trigger external tools, and compound requests with evolving dependencies across multiple LLM calls. Despite-or perhaps, because of-this workload diversity and unpredictable request information (e.g., response lengths and dependencies), existing request schedulers have focused on aggregate performance, unable to ensure application-level SLO needs. This paper presents JITServe, the first SLO-aware LLM serving system designed to maximize service goodput (e.g., the number of tokens meeting request SLOs) across diverse workloads. JITServe novelly schedules requests using imprecise request information and gradually relaxes this conservatism by refining request information estimates as generation progresses. It applies a grouped margin goodput maximization algorithm to allocate just enough serving bandwidth to satisfy each request's SLO just-in-time (JIT), maximizing residual capacity for others, while deciding the composition of requests in a batch to maximize efficiency and goodput with provable guarantees. Our evaluation across diverse realistic workloads, including chat, deep research, and agentic pipelines, shows that JITServe improves service goodput by 1.4x-6.3x, alternatively achieving 28.5%-83.2% resource savings, compared to state-of-the-art designs.

We present Épi, an autonomous research agent that sustains investigations across model sessions and evolves its methods through accumulated experience. Épi combines persistent research history, hierarchical memory, branching and independent review to maintain research continuity, learn from experiments, and explore and revisit alternative approaches. Its experiments run across session boundaries, and a fixed verifier evaluates their outputs. Épi produced 120 record-setting results, comprising 20 numerical bound records across 12 families and 100 construction records across eight families. These include an approximately 84-fold narrower interval for the n-queens constant and a more than 3.6-million-fold narrower rigorous interval for the quartic Feigenbaum attractor dimension. Exact dual certificates establish that the Cohn-Elkies linear-programming bound cannot be sharp in dimensions 10 and 11. Beyond numerical improvements, Épi gives a computer-assisted proof of Tuza's conjecture for split graphs with an eight-vertex clique part and at most three triangle-active neighborhood types, with arbitrary multiplicities. We extend this research process to algorithmic coding with Épi-turbo, a lightweight configuration that develops executable solvers for tasks including vehicle routing, scheduling and production planning. On 30 FrontierOR tasks, Épi-turbo achieves a 5.4% higher total benchmark score than Codex at 64% of its model cost, using the same underlying model and reasoning effort. Épi is designed to support human understanding by connecting computational results to explicit methods and mathematical arguments that researchers can examine and build upon.

Large language model (LLM) applications are evolving beyond simple chatbots into dynamic, general-purpose agentic programs, which scale LLM calls and output tokens to help AI agents reason, explore, and solve complex tasks. However, existing LLM serving systems ignore dependencies between programs and calls, missing significant opportunities for optimization. Our analysis reveals that programs submitted to LLM serving engines experience long cumulative wait times, primarily due to head-of-line blocking at both the individual LLM request and the program. To address this, we introduce Autellix, an LLM serving system that treats programs as first-class citizens to minimize their end-to-end latencies. Autellix intercepts LLM calls submitted by programs, enriching schedulers with program-level context. We propose two scheduling algorithms-for single-threaded and distributed programs-that preempt and prioritize LLM calls based on their programs' previously completed calls. Our evaluation demonstrates that across diverse LLMs and agentic workloads, Autellix improves throughput of programs by 4-15x at the same latency compared to state-of-the-art systems, such as vLLM.

Planning for real-world problems by language models often involves both world and user constraints, which may not be fully specified upfront and are progressively disclosed through interaction. However, existing benchmarks still underexplore adaptive planning under such progressively revealed dual constraints. To address this gap, we introduce AdaPlanBench, a dynamic interactive benchmark for evaluating whether Large Language Model (LLM) agents can adaptively plan and re-plan under progressively revealed world and user constraints. AdaPlanBench is built on 307 household tasks, with a scalable constraint construction pipeline that augments each task with dual constraints. At runtime, agents interact with the environment in a multi-turn protocol where hidden constraints are revealed only when the agent proposes a plan that violates them, requiring iterative plan revision under accumulating feedback. This makes planning challenging, as agents must infer and track constraints from feedback while re-planning effectively. Experiments on ten leading LLMs show that adaptive planning under dual constraints remains challenging, with the best model reaching only 67.75% accuracy. We further observe that performance degrades as more constraints accumulate, with user constraints posing a particularly large challenge and failures often stemming from weaker physical grounding and reduced effectiveness. These results establish AdaPlanBench as a testbed for dual-constrained interactive planning and highlight the challenge of reliable adaptation to dynamically revealed constraints in LLM agents.