Daily Papers

Quantization correction methods usually optimize weights, quantization parameters, or reconstruction objectives, while the underlying parameter subspaces responsible for effective correction remain unclear. In this work, we study quantization correction from a parameter subspace perspective and reveal that correction capability is highly non-uniform across parameter groups. By decomposing trainable parameters into backbone weights, normalization-affine parameters, and quantization parameters, we show that the low-dimensional normalization-affine subspace provides a highly efficient correction direction under matched budgets. Based on this finding, we propose SandwichQuant, a two-stage normalization-affine correction framework that performs adaptation before and after quantization. The pre-stage improves quantization robustness, while the post-stage compensates residual errors after the quantized graph is fixed. Extensive experiments on vision models and large language models demonstrate consistent improvements under various low-bit quantization settings, validating the effectiveness of subspace-aligned correction.

Training-free block-sparse attention can accelerate video transformers, but row-wise attention concentration does not by itself specify an executable sparse operator. Queries sharing a block route may have poorly overlapping supports, while retained attention mass alone does not determine the post-softmax error from skipped interactions. We show that partition geometry affects both pooled support and the predictability of the remaining residual from the sparse output. We introduce SparsePR, which combines Response-Coupled Partitioning with Probe-Fitted Residual Reconstruction. Sampled-query key responses form paired K/V groups, whose centroids induce query-response coordinates for shared routing. A small set of exact query rows then calibrates a call-specific affine correction from the sparse output within the output subspace observed in the probe residuals. Across four heterogeneous video generation and world models, SparsePR consistently reduces attention-reconstruction error. Ablations show that probe fitting accounts for most of this reduction, while response-coupled partitioning lowers hard-drop error and improves reconstruction under a finite probe budget. SparsePR preserves generation quality at 22.0-26.0% realized executed-pair density while achieving 1.48x-2.61x end-to-end speedups. Project page: https://pardistaghavi.github.io/SparsePR-website/

UAV thermal-to-satellite geo-localization localizes UAVs by matching real-time thermal images against georeferenced satellite images, enabling autonomous navigation in GNSS-denied and low-visibility conditions. However, substantial cross-modal disparities in color, brightness and viewpoint hinder conventional appearance-based methods from establishing reliable correspondences. While existing approaches predominantly address global modality shifts, they overlook the invariant scene structures inherently shared between thermal and satellite views. To bridge this gap, we propose SAMF, a Structure-Aware Matching Framework that explicitly exploits stable cross-modal structural cues to improve UAV thermal geolocalization. Specifically, the Directional Structure Enhancement Module (DSEM) strengthens robust structural representations by capturing directional and low-frequency spatial patterns, and the Modality-Aware Affine Remapping Module (MARM) subsequently applies affine correction to these enhanced features, further promoting cross-modal alignment. Additionally, we introduce the Thermal-UAV-Paired benchmark derived from the Thermal-UAV dataset. Extensive experiments on both the Boson-nighttime and Thermal-UAV-Paired datasets show that SAMF achieves state-of-the-art performance. Ablation studies further validate the effectiveness and synergistic complementarity of DSEM and MARM. The code and dataset are released at: https://github.com/YuxinWang879/SAMF.git.

Multi-view 3D reconstruction methods remain highly sensitive to photometric inconsistencies arising from camera optical characteristics and variations in image signal processing (ISP). Existing mitigation strategies such as per-frame latent variables or affine color corrections lack physical grounding and generalize poorly to novel views. We propose the Physically-Plausible ISP (PPISP) correction module, which disentangles camera-intrinsic and capture-dependent effects through physically based and interpretable transformations. A dedicated PPISP controller, trained on the input views, predicts ISP parameters for novel viewpoints, analogous to auto exposure and auto white balance in real cameras. This design enables realistic and fair evaluation on novel views without access to ground-truth images. PPISP achieves state-of-the-art performance on standard benchmarks, while providing intuitive control and supporting the integration of metadata when available. The source code is available at: https://github.com/nv-tlabs/ppisp

Long-sequence 3D reconstruction from RGB videos requires both accurate local geometry and globally consistent camera motion. Feed-forward models provide strong depth and pose predictions, but their memory cost prevents joint inference over long sequences. Chunk-wise processing improves scalability, yet independently predicted chunks often exhibit scale drift, pose errors, and point-cloud misalignment. We present GeoWeaver, a unified framework comprising a Geometric Prior Model (GPM) and Test-Time Adaptation (TTA). The GPM predicts chunk-wise depth, confidence, and camera parameters as adjustable geometric priors. TTA then performs sequential initialization, global chunk-level Sim(3) alignment, and coarse-to-fine refinement of camera poses, affine depth corrections, and intrinsics. Dense correspondences provide adjacent, cross-chunk, and long-range constraints, while a robust CDF-style objective jointly optimizes weighted 2D reprojection and 3D consistency residuals. This design preserves local geometric accuracy while correcting accumulated pose, scale, depth, and calibration errors. Experiments across diverse long-sequence benchmarks demonstrate improved camera accuracy, global consistency, and point-cloud quality. Ablations verify the contribution of each adaptation stage, and applying the same TTA procedure to different geometric prior models consistently improves their trajectory estimates, demonstrating that GeoWeaver is not tied to a specific GPM.

Document rectification in real-world scenarios poses significant challenges due to extreme variations in camera perspectives and physical distortions. Driven by the insight that complex transformations can be decomposed and resolved progressively, we introduce a novel multi-stage framework that progressively reverses distinct distortion types in a coarse-to-fine manner. Specifically, our framework first performs a global affine transformation to correct perspective distortions arising from the camera's viewpoint, then rectifies geometric deformations resulting from physical paper curling and folding, and finally employs a content-aware iterative process to eliminate fine-grained content distortions. To address limitations in existing evaluation protocols, we also propose two enhanced metrics: layout-aligned OCR metrics (AED/ACER) for a stable assessment that decouples geometric rectification quality from the layout analysis errors of OCR engines, and masked AD/AAD (AD-M/AAD-M) tailored for accurately evaluating geometric distortions in documents with incomplete boundaries. Extensive experiments show that our method establishes new state-of-the-art performance on multiple challenging benchmarks, yielding a substantial reduction of 14.1\%--34.7\% in the AAD metric and demonstrating superior efficacy in real-world applications. The code will be publicly available at https://github.com/chaoyunwang/ArbDR.

Weight-only post-training quantization (PTQ) enables the deployment of large language models under tight memory budgets, but accuracy often collapses at 2-3 bits. Existing backpropagation-free PTQ optimizers have two limitations: group decisions ignore the correction that the remaining continuous suffix can absorb, and discrete refinements typically keep the affine quantization grid fixed. We introduce SCHUROPT, which analytically eliminates the suffix's optimal continuous response, yielding an exact groupwise quadratic with Schur-complement curvature. It then alternates closed-form row-wise scale/zero-point refitting with coordinate descent over integer codes. With the GPTQ objective fixed, SCHUROPT improves mean zero-shot accuracy on 2-bit Qwen3-4B by 11.88 percentage points (pp). At higher precision, however, tighter reconstruction does not consistently improve end-model metrics. SCHURQUANT therefore combines SCHUROPT with quantized-prefix teacher reconstruction, reference-weight regularization, residual-add targets, and teacher-decision token weighting. Across eight Llama and Qwen models, SCHURQUANT achieves the highest mean zero-shot accuracy among the evaluated backpropagation free PTQ baselines, outperforming the strongest baseline by 9.65 pp at 2 bits.

Audio-Text Foundation Models (ATMs) fail catastrophically under severe acoustic noise, yet existing adaptation strategies either rely on gradient-based Test-Time Adaptation (TTA), which reinforces noise rather than signal, or on prompt tuning that requires privileged noise annotations unavailable at inference. We address these failures with PRISM (Prototype-Rectified Iterative Self-supervised Manifold Denoising), a training-free, source-free TTA framework grounded in the Affine Noise Hypothesis: severe acoustic noise induces a low-rank affine shift in the multimodal latent space, with more than 90% of distortion energy confined to the leading 60 principal components. PRISM estimates and reverses this distortion from an unlabeled target batch using frozen text prototypes as geometric anchors via three closed-form geometric corrections compiled into a single static projection matrix by Affine Bias Regression. At inference, adaptation reduces to one matrix-vector multiplication in 0.0009 ms, making it substantially faster than gradient-based TTA while requiring no additional training. On UrbanSound8K, PRISM improves over the zero-shot baseline by 12.94 percentage points and surpasses an oracle-assisted TTA baseline by 9.41 percentage points, despite never observing its privileged augmented noise prompts. We further identify the Polyphonic Trap, a principled failure mode of subspace deflation for broadband classes, and resolve it via Confidence-Aware Regression (CAR), recovering up to 8.16 percentage points for the worst-affected class.

We propose AffineGlue, a method for joint two-view feature matching and robust estimation that reduces the combinatorial complexity of the problem by employing single-point minimal solvers. AffineGlue selects potential matches from one-to-many correspondences to estimate minimal models. Guided matching is then used to find matches consistent with the model, suffering less from the ambiguities of one-to-one matches. Moreover, we derive a new minimal solver for homography estimation, requiring only a single affine correspondence (AC) and a gravity prior. Furthermore, we train a neural network to reject ACs that are unlikely to lead to a good model. AffineGlue is superior to the SOTA on real-world datasets, even when assuming that the gravity direction points downwards. On PhotoTourism, the AUC@10{\deg} score is improved by 6.6 points compared to the SOTA. On ScanNet, AffineGlue makes SuperPoint and SuperGlue achieve similar accuracy as the detector-free LoFTR.

Affine correspondences have received significant attention due to their benefits in tasks like image matching and pose estimation. Existing methods for extracting affine correspondences still have many limitations in terms of performance; thus, exploring a new paradigm is crucial. In this paper, we present a new pipeline designed for extracting accurate affine correspondences by integrating dense matching and geometric constraints. Specifically, a novel extraction framework is introduced, with the aid of dense matching and a novel keypoint scale and orientation estimator. For this purpose, we propose loss functions based on geometric constraints, which can effectively improve accuracy by supervising neural networks to learn feature geometry. The experimental show that the accuracy and robustness of our method outperform the existing ones in image matching tasks. To further demonstrate the effectiveness of the proposed method, we applied it to relative pose estimation. Affine correspondences extracted by our method lead to more accurate poses than the baselines on a range of real-world datasets. The code is available at https://github.com/stilcrad/DenseAffine.

The significant resource requirements associated with Large-scale Language Models (LLMs) have generated considerable interest in the development of techniques aimed at compressing and accelerating neural networks. Among these techniques, Post-Training Quantization (PTQ) has emerged as a subject of considerable interest due to its noteworthy compression efficiency and cost-effectiveness in the context of training. Existing PTQ methods for LLMs limit the optimization scope to scaling transformations between pre- and post-quantization weights. In this paper, we advocate for the direct optimization using equivalent Affine transformations in PTQ (AffineQuant). This approach extends the optimization scope and thus significantly minimizing quantization errors. Additionally, by employing the corresponding inverse matrix, we can ensure equivalence between the pre- and post-quantization outputs of PTQ, thereby maintaining its efficiency and generalization capabilities. To ensure the invertibility of the transformation during optimization, we further introduce a gradual mask optimization method. This method initially focuses on optimizing the diagonal elements and gradually extends to the other elements. Such an approach aligns with the Levy-Desplanques theorem, theoretically ensuring invertibility of the transformation. As a result, significant performance improvements are evident across different LLMs on diverse datasets. To illustrate, we attain a C4 perplexity of 15.76 (2.26 lower vs 18.02 in OmniQuant) on the LLaMA2-7B model of W4A4 quantization without overhead. On zero-shot tasks, AffineQuant achieves an average of 58.61 accuracy (1.98 lower vs 56.63 in OmniQuant) when using 4/4-bit quantization for LLaMA-30B, which setting a new state-of-the-art benchmark for PTQ in LLMs.

When you merge two fine-tuned models from the same base checkpoint by simply averaging their weights, you implicitly assume their attention subspaces are still aligned. Recent work attempts to fix misalignments by learning an invertible correction matrix, M, for each model's query and key projections. This correction cancels out---using M on the query side and M^{-T} on the key side---right before the dot product. However, this cancellation is only exact if nothing sits between the projection and the dot product. In reality, almost all modern open-weight language models put a rotary position embedding (RoPE) exactly there. In this paper, we show that this cancellation is exact under RoPE if and only if M commutes with RoPE's per-position rotation. We derive the specific class of matrices where this holds: a scaled rotation acting independently within each RoPE frequency pair. This forms a strict, low-dimensional subset of the unconstrained matrices that current methods normally train. Building on this, we turn this constrained matrix class into a new merging method. While keeping the base weights entirely frozen, two fine-tunes each learn their own RoPE-compliant correction matrices. We optimize these corrections against a chosen blend ratio so the final result can be adjusted post-hoc like a dial, rather than locked into a single fixed merge. Our default approach trains at one fixed blend ratio, similar to how LoRA sets its scaling hyperparameter in advance. We also experiment with resampling the blend ratio randomly at every training step, and we report the results of both approaches.

Affine correspondences have traditionally been used to improve feature matching over wide baselines. While recent work has successfully used affine correspondences to solve various relative camera pose estimation problems, less attention has been given to their use in absolute pose estimation. We introduce the first general solution to the problem of estimating the pose of a calibrated camera given a single observation of an oriented point and an affine correspondence. The advantage of our approach (P1AC) is that it requires only a single correspondence, in comparison to the traditional point-based approach (P3P), significantly reducing the combinatorics in robust estimation. P1AC provides a general solution that removes restrictive assumptions made in prior work and is applicable to large-scale image-based localization. We propose a minimal solution to the P1AC problem and evaluate our novel solver on synthetic data, showing its numerical stability and performance under various types of noise. On standard image-based localization benchmarks we show that P1AC achieves more accurate results than the widely used P3P algorithm. Code for our method is available at https://github.com/jonathanventura/P1AC/ .

Outer-learning algorithms use infinitesimal sensitivities to propose finite changes to initialization or training parameters. For hard-ReLU training, the derivative of the finite program and the derivative of its flow limit do not by themselves specify the response at a chosen radius. We characterize the intervening regime in which the perturbation radius is proportional to the GD step. Integer event rounding then survives at leading order: smooth Euler bias shifts each discrete phase, and upstream rounding moves downstream branch boundaries. We derive the crossing indices and a uniform endpoint expansion for finitely many separated transverse events in piecewise-C^2 dynamics, away from recursive phase boundaries. In contractive affine regions, an explicit remainder and complete branch verification certify finite candidate comparisons. Scalar phase frequencies and a coupled feedback ablation test the mechanism; frozen nonlinear-network experiments show radius-dependent prediction accuracy, including incomplete branch matches and failed-word tails. Together with local AD and uniform flow consistency, the result identifies sufficient response regimes: differentiating training is a choice of perturbation resolution as well as a choice of derivative.

Recent vision-language foundation models still frequently produce outputs misaligned with their inputs, evidenced by object hallucination in captioning and prompt misalignment in the text-to-image generation model. Recent studies have explored methods for identifying misaligned elements, aiming not only to enhance interpretability but also to improve model performance. However, current approaches primarily rely on large foundation models in a zero-shot manner or fine-tuned models with human annotations, which limits scalability due to significant computational costs. This work proposes a novel approach, dubbed CLIP4DM, for detecting dense misalignments from pre-trained CLIP, specifically focusing on pinpointing misaligned words between image and text. We carefully revamp the gradient-based attribution computation method, enabling negative gradient of individual text tokens to indicate misalignment. We also propose F-CLIPScore, which aggregates misaligned attributions with a global alignment score. We evaluate our method on various dense misalignment detection benchmarks, covering various image and text domains and misalignment types. Our method demonstrates state-of-the-art performance among zero-shot models and competitive performance with fine-tuned models while maintaining superior efficiency. Our qualitative examples show that our method has a unique strength to detect entity-level objects, intangible objects, and attributes that can not be easily detected for existing works. We conduct ablation studies and analyses to highlight the strengths and limitations of our approach. Our code is publicly available at https://github.com/naver-ai/CLIP4DM.

We consider a family of convex quadratic programs in which the coefficients of the linear objective term and the righthand side of the constraints are affine functions of a parameter. It is well known that the solution of such a parametrized quadratic program is a piecewise affine function of the parameter. The number of (polyhedral) regions in the solution map can grow exponentially in problem size, but when the number of regions is moderate, a so-called explicit solver is practical. Such a solver computes the coefficients of the affine functions and the linear inequalities defining the polyhedral regions offline; to solve a problem instance online it simply evaluates this explicit solution map. Potential advantages of an explicit solver over a more general purpose iterative solver can include transparency, interpretability, reliability, and speed. In this paper we describe how code generation can be used to automatically generate an explicit solver from a high level description of a parametrized quadratic program. Our method has been implemented in the open-source software CVXPYgen, which is part of CVXPY, a domain specific language for general convex optimization.

In this paper, we address the challenge of making ViT models more robust to unseen affine transformations. Such robustness becomes useful in various recognition tasks such as face recognition when image alignment failures occur. We propose a novel method called KP-RPE, which leverages key points (e.g.~facial landmarks) to make ViT more resilient to scale, translation, and pose variations. We begin with the observation that Relative Position Encoding (RPE) is a good way to bring affine transform generalization to ViTs. RPE, however, can only inject the model with prior knowledge that nearby pixels are more important than far pixels. Keypoint RPE (KP-RPE) is an extension of this principle, where the significance of pixels is not solely dictated by their proximity but also by their relative positions to specific keypoints within the image. By anchoring the significance of pixels around keypoints, the model can more effectively retain spatial relationships, even when those relationships are disrupted by affine transformations. We show the merit of KP-RPE in face and gait recognition. The experimental results demonstrate the effectiveness in improving face recognition performance from low-quality images, particularly where alignment is prone to failure. Code and pre-trained models are available.

Smaller activation outliers do not necessarily imply better low-bit quantization: their alignment with the quantizer matters. We introduce PrismQuant, a quantizer-aware rotation framework that aligns the leading activation eigenspace with the constant group subspace of asymmetric grouped INT4. The affine offsets represent the energy in this subspace without widening the range within the group. We formulate rotation design as a Ky Fan trace maximization and derive a closed-form solution that is provably optimal for this alignment objective. Compact Householder transformations and their compact-WY representation enable gradient-free construction and efficient application at both foldable and online sites. A predictive range law further connects unaligned activation energy and group size to quantization-relevant variation. Experiments on Llama, Qwen, and Mistral span dense models up to 70B parameters and a 30B mixture-of-experts model. Under W4A4KV4, PrismQuant sets the state of the art on Llama-3.2-3B among the compared methods in both perplexity and accuracy. On Llama-3.1-70B, it attains 3.85 perplexity and 72.46% average zero-shot accuracy, only 0.22 percentage points below full precision. In the deployment study on Llama-3.1-8B, our optimized implementation achieves 1.51x prefill and 1.22x CUDA Graph decode speedups over matched FP16 baselines, with 56.34% lower decode peak memory and only 2.35% additional Graph decode latency over Hadamard. Code is available at https://github.com/ForeverBlue816/PrismQuant.

Recently, quantization has been widely used for the compression and acceleration of large language models~(LLMs). Due to the outliers in LLMs, it is crucial to flatten weights and activations to minimize quantization error with the equally spaced quantization points. Prior research explores various pre-quantization transformations to suppress outliers, such as per-channel scaling and Hadamard transformation. However, we observe that these transformed weights and activations can still remain steep and outspread. In this paper, we propose FlatQuant (Fast and Learnable Affine Transformation), a new post-training quantization approach to enhance flatness of weights and activations. Our approach identifies optimal affine transformations tailored to each linear layer, calibrated in hours via a lightweight objective. To reduce runtime overhead, we apply Kronecker decomposition to the transformation matrices, and fuse all operations in FlatQuant into a single kernel. Extensive experiments show that FlatQuant sets up a new state-of-the-art quantization benchmark. For instance, it achieves less than 1% accuracy drop for W4A4 quantization on the LLaMA-3-70B model, surpassing SpinQuant by 7.5%. For inference latency, FlatQuant reduces the slowdown induced by pre-quantization transformation from 0.26x of QuaRot to merely 0.07x, bringing up to 2.3x speedup for prefill and 1.7x speedup for decoding, respectively. Code is available at: https://github.com/ruikangliu/FlatQuant.

Large Language Models (LLMs) present an intriguing avenue for exploration in the field of formal theorem proving. Nevertheless, their full potential, particularly concerning the mitigation of hallucinations and refinement through prover error messages, remains an area that has yet to be thoroughly investigated. To enhance the effectiveness of LLMs in the field, we introduce the Lyra, a new framework that employs two distinct correction mechanisms: Tool Correction (TC) and Conjecture Correction (CC). To implement Tool Correction in the post-processing of formal proofs, we leverage prior knowledge to utilize predefined prover tools (e.g., Sledgehammer) for guiding the replacement of incorrect tools. Tool Correction significantly contributes to mitigating hallucinations, thereby improving the overall accuracy of the proof. In addition, we introduce Conjecture Correction, an error feedback mechanism designed to interact with prover to refine formal proof conjectures with prover error messages. Compared to the previous refinement framework, the proposed Conjecture Correction refines generation with instruction but does not collect paired (generation, error & refinement) prompts. Our method has achieved state-of-the-art (SOTA) performance on both miniF2F validation (48.0% -> 55.3%) and test (45.5% -> 51.2%). We also present 3 IMO problems solved by Lyra. We believe Tool Correction (post-process for hallucination mitigation) and Conjecture Correction (subgoal adjustment from interaction with environment) could provide a promising avenue for future research in this field.

We provide a new theoretical framework for the variable-step deferred correction (DC) methods based on the well-known BDF2 formula. By using the discrete orthogonal convolution kernels, some high-order BDF2-DC methods are proven to be stable on arbitrary time grids according to the recent definition of stability (SINUM, 60: 2253-2272). It significantly relaxes the existing step-ratio restrictions for the BDF2-DC methods (BIT, 62: 1789-1822). The associated sharp error estimates are established by taking the numerical effects of the starting approximations into account, and they suggest that the BDF2-DC methods have no aftereffect, that is, the lower-order starting scheme for the BDF2 scheme will not cause a loss in the accuracy of the high-order BDF2-DC methods. Extensive tests on the graded and random time meshes are presented to support the new theory.

Noise plagues many numerical datasets, where the recorded values in the data may fail to match the true underlying values due to reasons including: erroneous sensors, data entry/processing mistakes, or imperfect human estimates. We consider general regression settings with covariates and a potentially corrupted response whose observed values may contain errors. By accounting for various uncertainties, we introduced veracity scores that distinguish between genuine errors and natural data fluctuations, conditioned on the available covariate information in the dataset. We propose a simple yet efficient filtering procedure for eliminating potential errors, and establish theoretical guarantees for our method. We also contribute a new error detection benchmark involving 5 regression datasets with real-world numerical errors (for which the true values are also known). In this benchmark and additional simulation studies, our method identifies incorrect values with better precision/recall than other approaches.

Conditional normalizing flows can generate diverse image samples for solving inverse problems. Most normalizing flows for inverse problems in imaging employ the conditional affine coupling layer that can generate diverse images quickly. However, unintended severe artifacts are occasionally observed in the output of them. In this work, we address this critical issue by investigating the origins of these artifacts and proposing the conditions to avoid them. First of all, we empirically and theoretically reveal that these problems are caused by "exploding inverse" in the conditional affine coupling layer for certain out-of-distribution (OOD) conditional inputs. Then, we further validated that the probability of causing erroneous artifacts in pixels is highly correlated with a Mahalanobis distance-based OOD score for inverse problems in imaging. Lastly, based on our investigations, we propose a remark to avoid exploding inverse and then based on it, we suggest a simple remedy that substitutes the affine coupling layers with the modified rational quadratic spline coupling layers in normalizing flows, to encourage the robustness of generated image samples. Our experimental results demonstrated that our suggested methods effectively suppressed critical artifacts occurring in normalizing flows for super-resolution space generation and low-light image enhancement.

We consider in this work quantities that can be obtained as limits of powers of parametrized matrices, for instance the inverse matrix or the logarithm of the determinant. Under the assumption of affine dependence in the parameters, we use the Empirical Interpolation Method (EIM) to derive an approximation for powers of these matrices, from which we derive a nonintrusive approximation for the aforementioned limits. We derive upper bounds of the error made by the obtained formula. Finally, numerical comparisons with classical intrusive and nonintrusive approximation techniques are provided: in the considered test-cases, our algorithm performs well compared to the nonintrusive ones.

A wide variety of deep learning techniques from style transfer to multitask learning rely on training affine transformations of features. Most prominent among these is the popular feature normalization technique BatchNorm, which normalizes activations and then subsequently applies a learned affine transform. In this paper, we aim to understand the role and expressive power of affine parameters used to transform features in this way. To isolate the contribution of these parameters from that of the learned features they transform, we investigate the performance achieved when training only these parameters in BatchNorm and freezing all weights at their random initializations. Doing so leads to surprisingly high performance considering the significant limitations that this style of training imposes. For example, sufficiently deep ResNets reach 82% (CIFAR-10) and 32% (ImageNet, top-5) accuracy in this configuration, far higher than when training an equivalent number of randomly chosen parameters elsewhere in the network. BatchNorm achieves this performance in part by naturally learning to disable around a third of the random features. Not only do these results highlight the expressive power of affine parameters in deep learning, but - in a broader sense - they characterize the expressive power of neural networks constructed simply by shifting and rescaling random features.

In astrophysical and cosmological analyses, the increasing quality and volume of astronomical data demand efficient and precise computational tools. This work introduces a novel adaptive algorithm for automatic knots (AutoKnots) allocation in spline interpolation, designed to meet user-defined precision requirements. Unlike traditional methods that rely on manually configured knot distributions with numerous parameters, the proposed technique automatically determines the optimal number and placement of knots based on interpolation error criteria. This simplifies configuration, often requiring only a single parameter. The algorithm progressively improves the interpolation by adaptively sampling the function-to-be-approximated, f(x), in regions where the interpolation error exceeds the desired threshold. All function evaluations contribute directly to the final approximation, ensuring efficiency. While each resampling step involves recomputing the interpolation table, this process is highly optimized and usually computationally negligible compared to the cost of evaluating f(x). We show the algorithm's efficacy through a series of precision tests on different functions. However, the study underscores the necessity for caution when dealing with certain function types, notably those featuring plateaus. To address this challenge, a heuristic enhancement is incorporated, improving accuracy in flat regions. This algorithm has been extensively used and tested over the years. NumCosmo includes a comprehensive set of unit tests that rigorously evaluate the algorithm both directly and indirectly, underscoring its robustness and reliability. As a practical application, we compute the surface mass density Sigma(R) and the average surface mass density Sigma(<R) for Navarro-Frenk-White and Hernquist halo density profiles, which provide analytical benchmarks. (abridged)

Low-bit quantization suffers severe accuracy degradation on compact networks, rooted in the dominant full-parameter coupled training paradigm that ignores parameter subspace heterogeneity. Their limited feature redundancy leaves little room to absorb quantization errors. Conventional pipelines adopt monolithic optimization: PTQ reconstructs fixed pretrained models without improving inherent quantization friendliness; QAT updates all parameters jointly, suffering from gradient coupling between backbone weights and calibration parameters. In this paper, we identify normalization affine parameters as a low-dimensional high-leverage subspace dominating quantization robustness, and propose Normalization Affine Preconditioning (NAP) for targeted subspace optimization. For PTQ, NAP freezes backbone weights and fine-tunes only affine parameters under the target fake-quantization graph on full-precision models, proactively boosting quantization friendliness before downstream reconstruction. For QAT, we introduce an alternating QAT-NAP schema that decouples feature learning and numerical calibration, breaking the performance ceiling of saturated joint training. Theoretical analysis confirms BN affine parameters fully cancel the channel-wise affine component of quantization distortion, while nonlinear rounding and clipping residuals form the irreducible error boundary; distillation-guided NAP acts as directional flatness optimization, projecting teacher-student logit mismatch onto the restricted subspace. Experiments on ImageNet and CIFAR-100 show NAP recovers severely collapsed low-bit quantization, consistently boosts reconstruction-based PTQ, and outperforms saturated full-parameter QAT with negligible tuning cost. This work reveals the principle of targeted low-dimensional subspace optimization, offering a new perspective beyond full-parameter coupled training for efficient deep learning.

We address the problem of synthesizing multi-view optical illusions: images that change appearance upon a transformation, such as a flip or rotation. We propose a simple, zero-shot method for obtaining these illusions from off-the-shelf text-to-image diffusion models. During the reverse diffusion process, we estimate the noise from different views of a noisy image, and then combine these noise estimates together and denoise the image. A theoretical analysis suggests that this method works precisely for views that can be written as orthogonal transformations, of which permutations are a subset. This leads to the idea of a visual anagram--an image that changes appearance under some rearrangement of pixels. This includes rotations and flips, but also more exotic pixel permutations such as a jigsaw rearrangement. Our approach also naturally extends to illusions with more than two views. We provide both qualitative and quantitative results demonstrating the effectiveness and flexibility of our method. Please see our project webpage for additional visualizations and results: https://dangeng.github.io/visual_anagrams/

Text-to-image diffusion models offer powerful image editing capabilities. To edit real images, many methods rely on the inversion of the image into Gaussian noise. A common approach to invert an image is to gradually add noise to the image, where the noise is determined by reversing the sampling equation. This process has an inherent tradeoff between reconstruction and editability, limiting the editing of challenging images such as highly-detailed ones. Recognizing the reliance of text-to-image models inversion on a text condition, this work explores the importance of the condition choice. We show that a condition that precisely aligns with the input image significantly improves the inversion quality. Based on our findings, we introduce Tight Inversion, an inversion method that utilizes the most possible precise condition -- the input image itself. This tight condition narrows the distribution of the model's output and enhances both reconstruction and editability. We demonstrate the effectiveness of our approach when combined with existing inversion methods through extensive experiments, evaluating the reconstruction accuracy as well as the integration with various editing methods.

Invariance and equivariance to geometrical transformations have proven to be very useful inductive biases when training (convolutional) neural network models, especially in the low-data regime. Much work has focused on the case where the symmetry group employed is compact or abelian, or both. Recent work has explored enlarging the class of transformations used to the case of Lie groups, principally through the use of their Lie algebra, as well as the group exponential and logarithm maps. The applicability of such methods to larger transformation groups is limited by the fact that depending on the group of interest G, the exponential map may not be surjective. Further limitations are encountered when G is neither compact nor abelian. Using the structure and geometry of Lie groups and their homogeneous spaces, we present a framework by which it is possible to work with such groups primarily focusing on the Lie groups G = GL^{+}(n, R) and G = SL(n, R), as well as their representation as affine transformations R^{n} rtimes G. Invariant integration as well as a global parametrization is realized by decomposing the `larger` groups into subgroups and submanifolds which can be handled individually. Under this framework, we show how convolution kernels can be parametrized to build models equivariant with respect to affine transformations. We evaluate the robustness and out-of-distribution generalisation capability of our model on the standard affine-invariant benchmark classification task, where we outperform all previous equivariant models as well as all Capsule Network proposals.

Recent text-guided image editing (TIE) models have made remarkable progress, yet edited images still frequently suffer from fine-grained issues such as unnatural objects, lighting mismatch, and unexpected changes. Existing refinement approaches either rely on costly iterative regeneration or employ vision-language models (VLMs) with weak spatial grounding, often resulting in semantic drift and unreliable local corrections. To address these limitations, we first construct EditFHF-15K, a dataset of fine-grained human feedback for edited images, comprising (1) 15K images from 12 TIE models spanning 43 editing tasks, (2) 60K annotated artifact regions and 80K editing failure regions, each accompanied by textual reasoning, and (3) 45K mean opinion scores (MOSs) assessing perceptual quality, instruction following, and visual consistency. Based on EditFHF-15K, we propose EditRefiner, a hierarchical, interpretable, and human-aligned agentic framework that reformulates post-editing correction as a human-like perception-reasoning-action-evaluation loop. Specifically, we introduce: (1) a perception agent that detects contextual saliency maps of artifacts and editing failures, (2) a reasoning agent that interprets these perceptual cues to perform human-aligned diagnostic inference, (3) an action agent that uses the reasoning output to plan and execute localized re-editing, and (4) an evaluation agent that assesses the re-edited image and guides the action agent on whether further refinements are required. Extensive experiments demonstrate that EditRefiner consistently outperforms state-of-the-art methods in distortion localization, diagnose accuracy and human perception alignment, establishing a new paradigm for self-corrective and perceptually reliable image editing. The code is available at https://github.com/IntMeGroup/EditRefiner.

The growing number of parameters and computational demands of large language models (LLMs) present significant challenges for their efficient deployment. Recently, there is an increasing interest in quantizing weights to extremely low precision while offsetting the resulting error with low-rank, high-precision error reconstruction terms. The combination of quantization and low-rank approximation is now popular in both adapter-based, parameter-efficient fine-tuning methods such as LoftQ and low-precision inference techniques including ZeroQuant-V2. Usually, the low-rank terms are calculated via the singular value decomposition (SVD) of the weight quantization error, minimizing the Frobenius and spectral norms of the weight approximation error. Recent methods like LQ-LoRA and LQER introduced hand-crafted heuristics to minimize errors in layer outputs (activations) rather than weights, resulting improved quantization results. However, these heuristic methods lack an analytical solution to guide the design of quantization error reconstruction terms. In this paper, we revisit this problem and formulate an analytical framework, named Quantization Error Reconstruction Analysis (QERA), and offer a closed-form solution to the problem. We show QERA benefits both existing low-precision fine-tuning and inference methods -- QERA achieves a fine-tuned accuracy gain of Δ_{acc} = 6.05% of 2-bit RoBERTa-base on GLUE compared to LoftQ; and obtains Δ_{acc} = 2.97% higher post-training quantization accuracy of 4-bit Llama-3.1-70B on average than ZeroQuant-V2 and Δ_{ppl} = - 0.28 lower perplexity on WikiText2 than LQER.

Recent advancements in Vision-Language Models (VLMs) have opened new possibilities in automatic grading of handwritten student responses, particularly in mathematics. However, a comprehensive study to test the ability of VLMs to evaluate and reason over handwritten content remains absent. To address this gap, we introduce FERMAT, a benchmark designed to assess the ability of VLMs to detect, localize and correct errors in handwritten mathematical content. FERMAT spans four key error dimensions - computational, conceptual, notational, and presentation - and comprises over 2,200 handwritten math solutions derived from 609 manually curated problems from grades 7-12 with intentionally introduced perturbations. Using FERMAT we benchmark nine VLMs across three tasks: error detection, localization, and correction. Our results reveal significant shortcomings in current VLMs in reasoning over handwritten text, with Gemini-1.5-Pro achieving the highest error correction rate (77%). We also observed that some models struggle with processing handwritten content, as their accuracy improves when handwritten inputs are replaced with printed text or images. These findings highlight the limitations of current VLMs and reveal new avenues for improvement. We release FERMAT and all the associated resources in the open-source to drive further research.

When a steering intervention changes a language model's behavior, which part of the intervention deserves the credit? We test this question for a target-centered, scaled conceptor complement by removing its fitted covariance filter while preserving the same target-specific center and gain. At the original aperture α=.05 and gain β=2, all 21 fitted maps across three models and seven targets expand every direction at the generation intervention layers. The matrix correction is 0.093%--7.815% of the matched-control displacement on held-out extraction activations. In 480 paired comparisons within a 1,920-response study, retaining the matrix changes many individual texts but does not establish a consistent additional target-suppression benefit on the four-target panel. A geometric aperture sweep shows that the operating regime changes with the filter setting. Separately, an invertible soft filter preserves what an unrestricted affine readout can recover, whereas dedicated erasure methods reduce prediction by newly fitted probes. Together, the results show why a whole-intervention comparison cannot by itself attribute generated behavior to the fitted matrix: analyze the complete transformation, hold shared components fixed, and test its output consequences directly.

Let S be a rational projective surface given by means of a projective rational parametrization whose base locus satisfies a mild assumption. In this paper we present an algorithm that provides three rational maps f,g,h:A^2 --to Ssubset P^n such that the union of the three images covers S. As a consequence, we present a second algorithm that generates two rational maps f,g:A^2 --to S, such that the union of their images covers the affine surface Scap A^n. In the affine case, the number of rational maps involved in the cover is in general optimal.

Large Language Model (LLM) based Chinese Grammatical Error Correction (CGEC) systems face two critical challenges: general-purpose models lack specialized linguistic priors for subtle grammatical distinctions, and Supervised Fine-Tuning (SFT) with Maximum Likelihood Estimation fails to optimize for precision-focused metrics, leading to systematic over-correction. We propose CSRP, a three-stage framework that progressively builds correction capability through Continual Pre-training (CPT) on 5.9M balanced samples to internalize domain knowledge, Chain-of-Thought SFT with explicit error reasoning for diagnostic transparency, and Group Relative Policy Optimization with a novel Efficiency-Aware Reward that explicitly penalizes unnecessary edits. On the NACGEC benchmark, CSRP achieves state-of-the-art performance with 50.99 F_{0.5} and 57.17 precision, substantially outperforming previous best results while effectively mitigating the over-correction bias inherent in MLE-trained models. Our method also advances CSCD spelling correction to 59.61 F1, surpassing GPT-4 by 5.20 points. Comprehensive ablation studies demonstrate that the RL alignment stage contributes a 8\% relative gain over the SFT baseline, and that this gain is orthogonal to the contribution of large-scale CPT, validating that explicit optimization for edit efficiency is essential for high-quality grammatical error correction. Our code is available at https://github.com/TW-NLP/ChineseErrorCorrector.

Evaluating ASR systems for Indian languages is challenging due to spelling variations, suffix splitting flexibility, and non-standard spellings in code-mixed words. Traditional Word Error Rate (WER) often presents a bleaker picture of system performance than what human users perceive. Better aligning evaluation with real-world performance requires capturing permissible orthographic variations, which is extremely challenging for under-resourced Indian languages. Leveraging recent advances in LLMs, we propose a framework for creating benchmarks that capture permissible variations. Through extensive experiments, we demonstrate that OIWER, by accounting for orthographic variations, reduces pessimistic error rates (an average improvement of 6.3 points), narrows inflated model gaps (e.g., Gemini-Canary performance difference drops from 18.1 to 11.5 points), and aligns more closely with human perception than prior methods like WER-SN by 4.9 points.

Retrieval systems rely on representations learned by increasingly powerful models. However, due to the high training cost and inconsistencies in learned representations, there is significant interest in facilitating communication between representations and ensuring compatibility across independently trained neural networks. In the literature, two primary approaches are commonly used to adapt different learned representations: affine transformations, which adapt well to specific distributions but can significantly alter the original representation, and orthogonal transformations, which preserve the original structure with strict geometric constraints but limit adaptability. A key challenge is adapting the latent spaces of updated models to align with those of previous models on downstream distributions while preserving the newly learned representation spaces. In this paper, we impose a relaxed orthogonality constraint, namely λ-Orthogonality regularization, while learning an affine transformation, to obtain distribution-specific adaptation while retaining the original learned representations. Extensive experiments across various architectures and datasets validate our approach, demonstrating that it preserves the model's zero-shot performance and ensures compatibility across model updates. Code available at: https://github.com/miccunifi/lambda_orthogonality.git{https://github.com/miccunifi/lambda\_orthogonality}.

Video matting is crucial for applications such as film production and virtual reality, yet deploying its computationally intensive models on resource-constrained devices presents challenges. Quantization is a key technique for model compression and acceleration. As an efficient approach, Post-Training Quantization (PTQ) is still in its nascent stages for video matting, facing significant hurdles in maintaining accuracy and temporal coherence. To address these challenges, this paper proposes a novel and general PTQ framework specifically designed for video matting models, marking, to the best of our knowledge, the first systematic attempt in this domain. Our contributions include: (1) A two-stage PTQ strategy that combines block-reconstruction-based optimization for fast, stable initial quantization and local dependency capture, followed by a global calibration of quantization parameters to minimize accuracy loss. (2) A Statistically-Driven Global Affine Calibration (GAC) method that enables the network to compensate for cumulative statistical distortions arising from factors such as neglected BN layer effects, even reducing the error of existing PTQ methods on video matting tasks up to 20%. (3) An Optical Flow Assistance (OFA) component that leverages temporal and semantic priors from frames to guide the PTQ process, enhancing the model's ability to distinguish moving foregrounds in complex scenes and ultimately achieving near full-precision performance even under ultra-low-bit quantization. Comprehensive quantitative and visual results show that our PTQ4VM achieves the state-of-the-art accuracy performance across different bit-widths compared to the existing quantization methods. We highlight that the 4-bit PTQ4VM even achieves performance close to the full-precision counterpart while enjoying 8x FLOP savings.

Recent advances in flow-based generative models have enabled training-free, text-guided image editing by inverting an image into its latent noise and regenerating it under a new target conditional guidance. However, existing methods struggle to preserve source fidelity: higher-order solvers incur additional model inferences, truncated inversion constrains editability, and feature injection methods lack architectural transferability. To address these limitations, we propose SteerFlow, a model-agnostic editing framework with strong theoretical guarantees on source fidelity. In the forward process, we introduce an Amortized Fixed-Point Solver that implicitly straightens the forward trajectory by enforcing velocity consistency across consecutive timesteps, yielding a high-fidelity inverted latent. In the backward process, we introduce Trajectory Interpolation, which adaptively blends target-editing and source-reconstruction velocities to keep the editing trajectory anchored to the source. To further improve background preservation, we introduce an Adaptive Masking mechanism that spatially constrains the editing signal with concept-guided segmentation and source-target velocity differences. Extensive experiments on FLUX.1-dev and Stable Diffusion 3.5 Medium demonstrate that SteerFlow consistently achieves better editing quality than existing methods. Finally, we show that SteerFlow extends naturally to a complex multi-turn editing paradigm without accumulating drift.

We present AnyCalib, a method for calibrating the intrinsic parameters of a camera from a single in-the-wild image, that is agnostic to the camera model. Current methods are predominantly tailored to specific camera models and/or require extrinsic cues, such as the direction of gravity, to be visible in the image. In contrast, we argue that the perspective and distortion cues inherent in images are sufficient for model-agnostic camera calibration. To demonstrate this, we frame the calibration process as the regression of the rays corresponding to each pixel. We show, for the first time, that this intermediate representation allows for a closed-form recovery of the intrinsics for a wide range of camera models, including but not limited to: pinhole, Brown-Conrady and Kannala-Brandt. Our approach also applies to edited -- cropped and stretched -- images. Experimentally, we demonstrate that AnyCalib consistently outperforms alternative methods, including 3D foundation models, despite being trained on orders of magnitude less data. Code is available at https://github.com/javrtg/AnyCalib.

We study low-precision computation of C=AB with both factors quantized. We derive an exact finite-dimensional identity for the expected squared product error under independent, zero-mean entrywise errors with known variance fields; it holds exactly for non-overloading subtractive dither and for independent stochastic rounding, and we empirically assess deterministic round-to-nearest (RTN). Using the product-preserving equivalence AB=(AT)(T^{-1}B), we formulate contraction-gauge preconditioning: jointly choosing a factor representation and its sharing pattern before quantization. Preconditioning can reduce product error but may require extra transformed, quantized copies of the opposite operand: a shared transform needs one copy, a block-specific transform up to one per block. Within the bounded family of positive diagonal gauges (folds), a geometric program computes a globally optimal shared fold and a linear program decides whether the identity fold is already optimal. For other families we derive computable selection statistics -- tail index for scaling, profile spread for partitioning, coherence and weighted-Gram energy for rotations, slice-energy covariance for hierarchy depth -- with upper bounds for ranking heuristic candidates. Across twelve linear products from a trained three-block image classifier, median within-product rank correlations between dither-model predictions and deterministic-RTN errors are 0.937 at 8 bits and 0.918 at 4 bits. The GP fold cuts held-out product error over the identity fold by 18.0% (8-bit) and 20.5% (4-bit) in geometric mean, beats a SmoothQuant-style grid baseline at both precisions and on ten of twelve products, and lowers composed logit MSE by 15.4% and 26.4%. We thus provide exact stochastic product-error accounting, certified selection within the diagonal family, and a common objective for evaluating reusable transform candidates under RTN.

Adaptive rounding methods such as GPTQ, or equivalently Babai's nearest plane algorithm, round a real matrix to integers under a quadratic metric. They process the entries in a fixed order, one at a time, propagating each rounding error to the entries not yet processed through a triangular feedback matrix. We study the two-sided version of this task, in which fixed nonsingular basis matrices act on both the left and the right of the residual; the familiar one-sided case is the special case of an identity right basis. Vectorizing the matrix turns the two-sided objective into a quadratic metric whose Gram matrix is a Kronecker product, so the one-dimensional algorithm applies verbatim, but takes quartic time in the matrix dimension. We present GPTQ-2D, which produces the identical rounded matrix in cubic time. It rounds the entries anti-diagonal by anti-diagonal; entries on the same anti-diagonal are independent and are rounded in parallel.

Sparse keypoint matching is crucial for 3D vision tasks, yet current keypoint detectors often produce spatially inaccurate matches. Existing refinement methods mitigate this issue through alignment of matched keypoint locations, but they are typically detector-specific, requiring retraining for each keypoint detector. We introduce XRefine, a novel, detector-agnostic approach for sub-pixel keypoint refinement that operates solely on image patches centered at matched keypoints. Our cross-attention-based architecture learns to predict refined keypoint coordinates without relying on internal detector representations, enabling generalization across detectors. Furthermore, XRefine can be extended to handle multi-view feature tracks. Experiments on MegaDepth, KITTI, and ScanNet demonstrate that the approach consistently improves geometric estimation accuracy, achieving superior performance compared to existing refinement methods while maintaining runtime efficiency. Our code and trained models can be found at https://github.com/boschresearch/xrefine.

Visual anomaly detection has been widely used in industrial inspection and medical diagnosis. Existing methods typically demand substantial training samples, limiting their utility in zero-/few-shot scenarios. While recent efforts have leveraged CLIP's zero-shot recognition capability for this task, they often ignore optimizing visual features to focus on local anomalies, reducing their efficacy. In this work, we propose AF-CLIP (Anomaly-Focused CLIP) by dramatically enhancing its visual representations to focus on local defects. Our approach introduces a lightweight adapter that emphasizes anomaly-relevant patterns in visual features, simultaneously optimizing both class-level features for image classification and patch-level features for precise localization. To capture anomalies of different sizes and improve detection accuracy, prior to the adapter, we develop a multi-scale spatial aggregation mechanism to effectively consolidate neighborhood context. Complementing these visual enhancements, we design learnable textual prompts that generically characterize normal and abnormal states. After optimization on auxiliary datasets using a composite objective function, AF-CLIP demonstrates strong zero-shot detection capability. Our method is also extended to few-shot scenarios by extra memory banks. Experimental results across diverse industrial and medical datasets demonstrate the effectiveness and generalization of our proposed method. Code is available at https://github.com/Faustinaqq/AF-CLIP.

We propose a modified moment matching algorithm to avoid catastrophic failures for sources with a low signal to noise ratio (SNR). The proposed modifications include a method to eliminate non-physical negative pixel values and a forced single iteration with an initial guess derived from co-add measurements when iterative methods are unstable. We correct for all biases in measurements introduced by the method. We find that the proposed modifications allow the algorithm to avoid catastrophic failures in nearly 100\% of the cases, especially at low signal to noise ratio. Additionally, with a reasonable guess from co-add measurements, the algorithm measures the flux, centroid, size, shape and ellipticity with bias statistically consistent with zero. We show the proposed method allows us to measure sources seven times fainter than traditional methods when applied to images obtained from WIYN-ODI. We also present a scheme to find uncertainties in measurements when using the new method to measure astronomical sources.

Proof autoformalization aims to translate a mathematical informal proof written in natural language into a formal proof in a formal language such as Lean~4. Several works have developed LLM-based models for proof autoformalization. However, existing evaluations have typically focused on translating well-formed informal proofs from curated datasets. We argue that a robust proof autoformalizer must remain faithful even for informal proofs that diverge from these idealized ones, and we present the first study on the robustness of proof autoformalization models. We formulate two categories of perturbations and evaluate robustness under each: a global perturbation paraphrases the informal proof in a different style, under which the formalization should remain consistent; a local perturbation alters a value, symbol, or proof step, possibly in a counterfactual way, and a robust formalization should faithfully reflect the perturbation rather than reverting to the original one or inferring a different one on its own. We build a benchmark with both perturbations on miniF2F and MATH-500, and automatically measure how stable a proof autoformalization's correctness is under global perturbations and how faithfully its output reflects local perturbations. We evaluate seven recent models, all of which are sensitive to global perturbations and mostly fail to remain faithful under local perturbations. Code and data are available via https://github.com/ucr-rai/robust-proof-autoformalization.

Reinforcement learning (RL) fine-tuning of large language models (LLMs) often suffers from instability due to the numerical mismatch between the training and inference policies. While prior work has attempted to mitigate this issue through algorithmic corrections or engineering alignments, we show that its root cause lies in the floating point precision itself. The widely adopted BF16, despite its large dynamic range, introduces large rounding errors that breaks the consistency between training and inference. In this work, we demonstrate that simply reverting to FP16 effectively eliminates this mismatch. The change is simple, fully supported by modern frameworks with only a few lines of code change, and requires no modification to the model architecture or learning algorithm. Our results suggest that using FP16 uniformly yields more stable optimization, faster convergence, and stronger performance across diverse tasks, algorithms and frameworks. We hope these findings motivate a broader reconsideration of precision trade-offs in RL fine-tuning.

Aiming to enhance Face Recognition (FR) on Low-Quality (LQ) inputs, recent studies suggest incorporating synthetic LQ samples into training. Although promising, the quality factors that are considered in these works are general rather than FR-specific, \eg, atmospheric turbulence, resolution, \etc. Motivated by the observation of the vulnerability of current FR models to even small Face Alignment Errors (FAE) in LQ images, we present a simple yet effective method that considers FAE as another quality factor that is tailored to FR. We seek to improve LQ FR by enhancing FR models' robustness to FAE. To this aim, we formalize the problem as a combination of differentiable spatial transformations and adversarial data augmentation in FR. We perturb the alignment of the training samples using a controllable spatial transformation and enrich the training with samples expressing FAE. We demonstrate the benefits of the proposed method by conducting evaluations on IJB-B, IJB-C, IJB-S (+4.3\% Rank1), and TinyFace (+2.63\%). https://github.com/msed-Ebrahimi/ARoFace{https://github.com/msed-Ebrahimi/ARoFace}

This paper identifies the misinterpretation of the context can be a significant issue during the reasoning process of large language models, spanning from smaller models like Llama3.2-3B-Instruct to cutting-edge ones like DeepSeek-R1. For example, in the phrase "10 dollars per kilo," LLMs might not recognize that "per" means "for each," leading to calculation errors. We introduce a novel, post-training approach called **Stick to the Facts (SIFT)** to tackle this. SIFT leverages increasing inference-time compute to ground LLM reasoning in contexts. At the core of SIFT lies the *Sticker*, which is generated by the model itself to explicitly emphasize the key information within the context. Given the curated Sticker, SIFT generates two predictions -- one from the original query and one from the query augmented with the Sticker. If they differ, the Sticker is sequentially refined via *forward* optimization (to better align the extracted facts with the query) and *inverse* generation (to conform with the model's inherent tendencies) for more faithful reasoning outcomes. Studies across diverse models (from 3B to 100B+) and benchmarks (e.g., GSM8K, MATH-500) reveal consistent performance improvements. Notably, SIFT improves the pass@1 accuracy of DeepSeek-R1 on AIME2024 from 78.33% to **85.67**%, establishing a new state-of-the-art in the open-source community. The code is available at https://github.com/zhijie-group/SIFT.

Diffusion models are widely used for generative tasks across domains. Given a pre-trained diffusion model, it is often desirable to fine-tune it further either to correct for errors in learning or to align with downstream applications. Towards this, we examine the effect of shaping the distribution at intermediate noise levels induced by diffusion models. First, we show that existing variants of Rejection sAmpling based Fine-Tuning (RAFT), which we unify as GRAFT, can implicitly perform KL regularized reward maximization with reshaped rewards. Motivated by this observation, we introduce P-GRAFT to shape distributions at intermediate noise levels and demonstrate empirically that this can lead to more effective fine-tuning. We mathematically explain this via a bias-variance tradeoff. Next, we look at correcting learning errors in pre-trained flow models based on the developed mathematical framework. In particular, we propose inverse noise correction, a novel algorithm to improve the quality of pre-trained flow models without explicit rewards. We empirically evaluate our methods on text-to-image(T2I) generation, layout generation, molecule generation and unconditional image generation. Notably, our framework, applied to Stable Diffusion v2, improves over policy gradient methods on popular T2I benchmarks in terms of VQAScore and shows an 8.81% relative improvement over the base model. For unconditional image generation, inverse noise correction improves FID of generated images at lower FLOPs/image.

Flow-matching models generate samples through iterative velocity predictions, but typically do not revisit these predictions using the intermediate representations that produced them. We introduce CorrFlow, a self-correcting flow-matching framework that reuses this information through a lightweight refiner. Under rectified-flow interpolation, the error of the one-step clean prediction equals the realized velocity residual scaled by the noise level. Motivated by this identity, the refiner learns to predict residual corrections from the base model's clean prediction, conditioning, noise level and hidden states from the same forward pass. The correction is added to the base velocity before each sampling update, so subsequent predictions are made from the corrected state. This requires no additional base-model evaluations and only one lightweight refiner evaluation per step. Our theoretical analyses establish conditions under which feature reuse outperforms raw-input affine predictors and refiner training achieves greater residual-risk reduction than continued base-model training under a matched training compute budget. Experiments on class-conditional image generation, text-to-video generation and image-to-video generation show consistent improvements over the corresponding base models, including gains in visual quality and physical consistency. Project Page: https://fogradio.github.io/corrflow-project

This work examines the challenges of training neural networks using vector quantization using straight-through estimation. We find that a primary cause of training instability is the discrepancy between the model embedding and the code-vector distribution. We identify the factors that contribute to this issue, including the codebook gradient sparsity and the asymmetric nature of the commitment loss, which leads to misaligned code-vector assignments. We propose to address this issue via affine re-parameterization of the code vectors. Additionally, we introduce an alternating optimization to reduce the gradient error introduced by the straight-through estimation. Moreover, we propose an improvement to the commitment loss to ensure better alignment between the codebook representation and the model embedding. These optimization methods improve the mathematical approximation of the straight-through estimation and, ultimately, the model performance. We demonstrate the effectiveness of our methods on several common model architectures, such as AlexNet, ResNet, and ViT, across various tasks, including image classification and generative modeling.

We introduce ExTernD (Expanded-rank Ternary Decomposition), a post-training factorization of each LLM weight matrix A in R^{m times n} into A approx B diag(D) C with ternary factors B in {-1,0,+1}^{m times k}, C in {-1,0,+1}^{k times n} and a real scale vector D in R^k. The inner rank k = μmin(m,n) is deliberately expanded beyond full rank (μ> 1), so that components past full rank correct the quantization error of earlier ones. We prove the residual decreases monotonically in k and can be driven below any varepsilon > 0: ExTernD approaches bf16 accuracy arbitrarily closely, which no ternary scheme with a fixed plane count can do. Memory and compute scale continuously with μ, and factor sparsity continuously with a threshold τ, so an accuracy target is hit exactly rather than rounded to the next bit-width. ExTernD matches Q4_K's per-matrix accuracy at 5.2-5.5 effective bpw (5.1-5.5 with importance weighting) on Gemma-4-E2B and Qwen3.5-4B, and a full Qwen3.5-4B conversion at μ= 3 reaches 10.10 wikitext-2 perplexity against 9.78 for bf16 (+3.2%), placing it near the Q4_K/Q5_K accuracy band at ~5.7 effective bpw.

Diffusion probabilistic models (DPMs) have shown remarkable performance in visual synthesis but are computationally expensive due to the need for multiple evaluations during the sampling. Recent predictor-corrector diffusion samplers have significantly reduced the required number of function evaluations (NFE), but inherently suffer from a misalignment issue caused by the extra corrector step, especially with a large classifier-free guidance scale (CFG). In this paper, we introduce a new fast DPM sampler called DC-Solver, which leverages dynamic compensation (DC) to mitigate the misalignment of the predictor-corrector samplers. The dynamic compensation is controlled by compensation ratios that are adaptive to the sampling steps and can be optimized on only 10 datapoints by pushing the sampling trajectory toward a ground truth trajectory. We further propose a cascade polynomial regression (CPR) which can instantly predict the compensation ratios on unseen sampling configurations. Additionally, we find that the proposed dynamic compensation can also serve as a plug-and-play module to boost the performance of predictor-only samplers. Extensive experiments on both unconditional sampling and conditional sampling demonstrate that our DC-Solver can consistently improve the sampling quality over previous methods on different DPMs with a wide range of resolutions up to 1024times1024. Notably, we achieve 10.38 FID (NFE=5) on unconditional FFHQ and 0.394 MSE (NFE=5, CFG=7.5) on Stable-Diffusion-2.1. Code is available at https://github.com/wl-zhao/DC-Solver

Lower numerical precision reduces storage and memory traffic but raises the perturbation floor. We study rank compensation: reinvesting saved memory in a larger approximation rank. For matrices, the singular-value error identity yields a directly testable sufficient condition requiring the additional singular component to offset the perturbation from storing the rank-augmented approximation in lower precision. On ten SuiteSparse matrices, all 100 truncation-dominated configurations (50 FP32 and 50 FP16) are certified non-increases and strict accuracy wins, with mean error ratio 0.963 and storage ratios 58.8% and 29.4% relative to the FP64 baseline. FP16 failures occur only in tail-rank stress tests near the perturbation floor. At the largest resident matrix-application batch, compensated FP32 and FP16 achieve geometric-mean A100 speedups of 1.28times and 2.12times; neither accelerates the smallest batch. For Tensor-Train (TT) approximation, we give a conditional a posteriori extension based on the measured truncation gain and rounded-core perturbation. Across three-way and six-way synthetic tests, FP32 and FP16 achieve combined accuracy-memory wins in 10 of 20 and 14 of 20 trials. On public hyperspectral tensors and FROSTT top-active subtensors, the corresponding counts are 44 of 60 and 54 of 60; four FP16 Salinas-A tail-stress cases fail. No certified TT case exceeds the FP64 error beyond numerical tolerance. Reconstruction of six public tensors yields geometric-mean compensated speedups of 1.38times (FP32) and 1.94times (FP16). Timings cover resident downstream kernels, not factorization, transfers, or end-to-end acceleration.

The inability of deep learning models to handle data drawn from unseen distributions has sparked much interest in unsupervised out-of-distribution (U-OOD) detection, as it is crucial for reliable deep learning models. Despite considerable attention, theoretically-motivated approaches are few and far between, with most methods building on top of some form of heuristic. Recently, U-OOD was formalized in the context of data invariants, allowing a clearer understanding of how to characterize U-OOD, and methods leveraging affine invariants have attained state-of-the-art results on large-scale benchmarks. Nevertheless, the restriction to affine invariants hinders the expressiveness of the approach. In this work, we broaden the affine invariants formulation to a more general case and propose a framework consisting of a normalizing flow-like architecture capable of learning non-linear invariants. Our novel approach achieves state-of-the-art results on an extensive U-OOD benchmark, and we demonstrate its further applicability to tabular data. Finally, we show our method has the same desirable properties as those based on affine invariants.

Riemannian submanifold optimization with momentum is computationally challenging because, to ensure that the iterates remain on the submanifold, we often need to solve difficult differential equations. Here, we simplify such difficulties for a class of structured symmetric positive-definite matrices with the affine-invariant metric. We do so by proposing a generalized version of the Riemannian normal coordinates that dynamically orthonormalizes the metric and locally converts the problem into an unconstrained problem in the Euclidean space. We use our approach to simplify existing approaches for structured covariances and develop matrix-inverse-free 2^nd-order optimizers for deep learning in low precision settings. Code: https://github.com/yorkerlin/StructuredNGD-DL

Vision-language verifiers and routers must distinguish errors repairable by more reasoning from those caused by visual evidence never reaching the language model. This distinction lacks ground truth because annotators see full-resolution images while models receive preprocessed tensors. We introduce AliasForge to create cases where the relevant fact is provably absent from the interface. Fixed-point resampling makes the pre-rounding resize an exact integer linear map that can send nonzero integer perturbations to zero. Hiding a label-flipping perturbation there produces images with opposite step-correctness labels but bit-identical interface states. Every verifier therefore has the same output law on both members, giving pair-balanced accuracy exactly one half and zero gain from language-side repair. We prove that every fixed-point downscaler has such null vectors and bound their smallest size at the most common ratios, which rules out an 8-bit fit whenever the bound exceeds 255. From the resize configuration alone, a lattice criterion supplies realizable collisions and certifies their absence within the specified construction family. It resolves all 20 screened configurations, 17 as constructible and 3 as non-constructible. We construct certified pairs across three architectures and certify four additional processors, with zero decision-logit gap on all 18 scored pairs and none of the 18 controls. The pairs also screen routers that waste computation on re-attention or further reasoning. On natural items, per-item routing headroom exists, but no tested interface-only router improves over stopping. Our fiber ceiling bounds the headroom recoverable from the interface. Code: https://github.com/KurbanIntelligenceLab/aliasforge.

Large-scale text-to-image models enable a wide range of image editing techniques, using text prompts or even spatial controls. However, applying these editing methods to multi-view images depicting a single scene leads to 3D-inconsistent results. In this work, we focus on spatial control-based geometric manipulations and introduce a method to consolidate the editing process across various views. We build on two insights: (1) maintaining consistent features throughout the generative process helps attain consistency in multi-view editing, and (2) the queries in self-attention layers significantly influence the image structure. Hence, we propose to improve the geometric consistency of the edited images by enforcing the consistency of the queries. To do so, we introduce QNeRF, a neural radiance field trained on the internal query features of the edited images. Once trained, QNeRF can render 3D-consistent queries, which are then softly injected back into the self-attention layers during generation, greatly improving multi-view consistency. We refine the process through a progressive, iterative method that better consolidates queries across the diffusion timesteps. We compare our method to a range of existing techniques and demonstrate that it can achieve better multi-view consistency and higher fidelity to the input scene. These advantages allow us to train NeRFs with fewer visual artifacts, that are better aligned with the target geometry.

Reliable confidence estimates are essential in semantic segmentation, especially in safety-critical settings where overconfident errors can mislead downstream decisions. Yet modern segmentation models often remain miscalibrated. Post-hoc calibration offers a practical way to correct confidence estimates without retraining the segmentation model, but its use in dense prediction raises structural issues that are often overlooked. We study two such issues. First, adding a constant to all logits leaves the softmax probabilities unchanged, but several standard calibrators can still depend on this arbitrary offset. As a result, two logit representations encoding the same predictive distribution may yield different calibrated probabilities. We define translation-invariant (TI) calibrators as those whose outputs are unchanged under such shifts, characterize which common calibrators satisfy this property, and construct TI counterparts of shift-sensitive calibrators to isolate the effect of removing representation dependence. Second, post-hoc calibration is typically fitted by minimizing a likelihood-based objective, whereas segmentation models are trained with task-specific metrics such as Dice. This mismatch can cause calibration to alter class orderings and degrade the deployed segmentation map. We study decision-preserving calibration under argmax- and order-preservation constraints. Since enforcing these constraints collapses affine softmax calibrators to temperature scaling, we introduce class-conditional affine calibrators that can be made argmax- or order-preserving while retaining greater expressivity, allowing us to quantify the calibration-segmentation trade-off induced by decision preservation. Across natural-image and medical segmentation benchmarks, and under corruption-based covariate shift, matched comparisons show that TI variants generally improve calibration metrics, while decision-preserving variants prevent segmentation degradation and retain strong calibration performance. These results provide practical design principles for well-defined post-hoc calibration pipelines in semantic segmentation.

With the increasingly powerful performances and enormous scales of Pretrained Language Models (PLMs), promoting parameter efficiency in fine-tuning has become a crucial need for effective and efficient adaptation to various downstream tasks. One representative line of fine-tuning methods is Orthogonal Fine-tuning (OFT), which rigorously preserves the angular distances within the parameter space to preserve the pretrained knowledge. Despite the empirical effectiveness, OFT still suffers low parameter efficiency at O(d^2) and limited capability of downstream adaptation. Inspired by Givens rotation, in this paper, we proposed quasi-Givens Orthogonal Fine-Tuning (qGOFT) to address the problems. We first use O(d) Givens rotations to accomplish arbitrary orthogonal transformation in SO(d) with provable equivalence, reducing parameter complexity from O(d^2) to O(d). Then we introduce flexible norm and relative angular adjustments under soft orthogonality regularization to enhance the adaptation capability of downstream semantic deviations. Extensive experiments on various tasks and PLMs validate the effectiveness of our methods.

3D scene reconstruction is a long-standing vision task. Existing approaches can be categorized into geometry-based and learning-based methods. The former leverages multi-view geometry but can face catastrophic failures due to the reliance on accurate pixel correspondence across views. The latter was proffered to mitigate these issues by learning 2D or 3D representation directly. However, without a large-scale video or 3D training data, it can hardly generalize to diverse real-world scenarios due to the presence of tens of millions or even billions of optimization parameters in the deep network. Recently, robust monocular depth estimation models trained with large-scale datasets have been proven to possess weak 3D geometry prior, but they are insufficient for reconstruction due to the unknown camera parameters, the affine-invariant property, and inter-frame inconsistency. Here, we propose a novel test-time optimization approach that can transfer the robustness of affine-invariant depth models such as LeReS to challenging diverse scenes while ensuring inter-frame consistency, with only dozens of parameters to optimize per video frame. Specifically, our approach involves freezing the pre-trained affine-invariant depth model's depth predictions, rectifying them by optimizing the unknown scale-shift values with a geometric consistency alignment module, and employing the resulting scale-consistent depth maps to robustly obtain camera poses and achieve dense scene reconstruction, even in low-texture regions. Experiments show that our method achieves state-of-the-art cross-dataset reconstruction on five zero-shot testing datasets.

Although document OCR systems perform increasingly well on routine documents, complex formulas, structured text, and long-tail formats remain error-prone. OCR predictions may omit fine-grained content or hallucinate unsupported outputs, while equivalent encodings of the same visible content must be accommodated. Existing OCR evaluation methods mostly report aggregate metrics, offering limited support for analyzing case-level errors and improving OCR performance. We propose OCR-EDR (OCR Error Diagnosis and Repair), a rendering-aware framework that advances from fine-grained diagnosis to iterative repair. Given a source image, an editable OCR prediction, and its rendered image, OCR-EDR first jointly assesses whether the prediction and its rendering are consistent with the source, preserving valid predictions, including rendering-equivalent ones, while diagnosing and localizing genuine errors. It then applies executable edits and may request an updated rendering for iterative reassessment. We construct OCRErrBench from diverse real OCR predictions, covering text and formulas, exact and rendering-equivalent positives, and genuine errors, and develop the DocEDR model to execute the diagnosis--repair loop. On OCRErrBench, DocEDR achieves 94.78% diagnostic accuracy. It repairs 86.23% of erroneous inputs to visual consistency, raises formula Case-F1 by 30.99 percentage points over DOCR-Inspector-7B on DOCRcaseBench, and improves formula CDM by up to 4.62 percentage points on the identified Bad subsets of four OCR systems on UniMER-Test. These results show that OCR-EDR turns fine-grained OCR analysis into verified corrections and performance gains.

Large models training is plagued by the intense compute cost and limited hardware memory. A practical solution is low-precision representation but is troubled by loss in numerical accuracy and unstable training rendering the model less useful. We argue that low-precision floating points can perform well provided the error is properly compensated at the critical locations in the training process. We propose Collage which utilizes multi-component float representation in low-precision to accurately perform operations with numerical errors accounted. To understand the impact of imprecision to training, we propose a simple and novel metric which tracks the lost information during training as well as differentiates various precision strategies. Our method works with commonly used low-precision such as half-precision (16-bit floating points) and can be naturally extended to work with even lower precision such as 8-bit. Experimental results show that pre-training using Collage removes the requirement of using 32-bit floating-point copies of the model and attains similar/better training performance compared to (16, 32)-bit mixed-precision strategy, with up to 3.7times speedup and sim 15% to 23% less memory usage in practice.

Recent studies have shown that CLIP has achieved remarkable success in performing zero-shot inference while its fine-tuning performance is not satisfactory. In this paper, we identify that fine-tuning performance is significantly impacted by hyper-parameter choices. We examine various key hyper-parameters and empirically evaluate their impact in fine-tuning CLIP for classification tasks through a comprehensive study. We find that the fine-tuning performance of CLIP is substantially underestimated. Equipped with hyper-parameter refinement, we demonstrate CLIP itself is better or at least competitive in fine-tuning compared with large-scale supervised pre-training approaches or latest works that use CLIP as prediction targets in Masked Image Modeling. Specifically, CLIP ViT-Base/16 and CLIP ViT-Large/14 can achieve 85.7%,88.0% finetuning Top-1 accuracy on the ImageNet-1K dataset . These observations challenge the conventional conclusion that CLIP is not suitable for fine-tuning, and motivate us to rethink recently proposed improvements based on CLIP. We will release our code publicly at https://github.com/LightDXY/FT-CLIP.

We systematically study antithetic initial noise in diffusion models, discovering that pairing each noise sample with its negation consistently produces strong negative correlation. This universal phenomenon holds across datasets, model architectures, conditional and unconditional sampling, and even other generative models such as VAEs and Normalizing Flows. To explain it, we combine experiments and theory and propose a symmetry conjecture that the learned score function is approximately affine antisymmetric (odd symmetry up to a constant shift), supported by empirical evidence. This negative correlation leads to substantially more reliable uncertainty quantification with up to 90% narrower confidence intervals. We demonstrate these gains on tasks including estimating pixel-wise statistics and evaluating diffusion inverse solvers. We also provide extensions with randomized quasi-Monte Carlo noise designs for uncertainty quantification, and explore additional applications of the antithetic noise design to improve image editing and generation diversity. Our framework is training-free, model-agnostic, and adds no runtime overhead. Code is available at https://github.com/jjia131/Antithetic-Noise-in-Diffusion-Models-page.

Language models have demonstrated remarkable performance in solving reasoning tasks; however, even the strongest models still occasionally make reasoning mistakes. Recently, there has been active research aimed at improving reasoning accuracy, particularly by using pretrained language models to "self-correct" their mistakes via multi-round prompting. In this paper, we follow this line of work but focus on understanding the usefulness of incorporating "error-correction" data directly into the pretraining stage. This data consists of erroneous solution steps immediately followed by their corrections. Using a synthetic math dataset, we show promising results: this type of pretrain data can help language models achieve higher reasoning accuracy directly (i.e., through simple auto-regression, without multi-round prompting) compared to pretraining on the same amount of error-free data. We also delve into many details, such as (1) how this approach differs from beam search, (2) how such data can be prepared, (3) whether masking is needed on the erroneous tokens, (4) the amount of error required, (5) whether such data can be deferred to the fine-tuning stage, and many others.

Diffusion and flow-matching models achieve remarkable generative performance but at the cost of many sampling steps, this slows inference and limits applicability to time-critical tasks. The ReFlow procedure can accelerate sampling by straightening generation trajectories. However, ReFlow is an iterative procedure, typically requiring training on simulated data, and results in reduced sample quality. To mitigate sample deterioration, we examine the design space of ReFlow and highlight potential pitfalls in prior heuristic practices. We then propose seven improvements for training dynamics, learning and inference, which are verified with thorough ablation studies on CIFAR10 32 times 32, AFHQv2 64 times 64, and FFHQ 64 times 64. Combining all our techniques, we achieve state-of-the-art FID scores (without / with guidance, resp.) for fast generation via neural ODEs: 2.23 / 1.98 on CIFAR10, 2.30 / 1.91 on AFHQv2, 2.84 / 2.67 on FFHQ, and 3.49 / 1.74 on ImageNet-64, all with merely 9 neural function evaluations.

Large pre-trained models such as CLIP or ALIGN offer consistent accuracy across a range of data distributions when performing zero-shot inference (i.e., without fine-tuning on a specific dataset). Although existing fine-tuning methods substantially improve accuracy on a given target distribution, they often reduce robustness to distribution shifts. We address this tension by introducing a simple and effective method for improving robustness while fine-tuning: ensembling the weights of the zero-shot and fine-tuned models (WiSE-FT). Compared to standard fine-tuning, WiSE-FT provides large accuracy improvements under distribution shift, while preserving high accuracy on the target distribution. On ImageNet and five derived distribution shifts, WiSE-FT improves accuracy under distribution shift by 4 to 6 percentage points (pp) over prior work while increasing ImageNet accuracy by 1.6 pp. WiSE-FT achieves similarly large robustness gains (2 to 23 pp) on a diverse set of six further distribution shifts, and accuracy gains of 0.8 to 3.3 pp compared to standard fine-tuning on seven commonly used transfer learning datasets. These improvements come at no additional computational cost during fine-tuning or inference.

We introduce pi^3, a feed-forward neural network that offers a novel approach to visual geometry reconstruction, breaking the reliance on a conventional fixed reference view. Previous methods often anchor their reconstructions to a designated viewpoint, an inductive bias that can lead to instability and failures if the reference is suboptimal. In contrast, pi^3 employs a fully permutation-equivariant architecture to predict affine-invariant camera poses and scale-invariant local point maps without any reference frames. This design makes our model inherently robust to input ordering and highly scalable. These advantages enable our simple and bias-free approach to achieve state-of-the-art performance on a wide range of tasks, including camera pose estimation, monocular/video depth estimation, and dense point map reconstruction. Code and models are publicly available.

Post-training quantization has emerged as the most widely used strategy for deploying large language models at low precision. Still, current methods show perplexity degradation at bit-widths less than or equal to 4, partly because representing outliers causes precision issues in parameters that share the same scales as these outliers. This problem is especially pronounced for calibration-free, uniform quantization methods. We introduce SINQ to augment existing post-training quantizers with an additional second-axis scale factor and a fast Sinkhorn-Knopp-style algorithm that finds scales to normalize per-row and per-column variances, thereby minimizing a novel per-matrix proxy target for quantization: the matrix imbalance. Our method has no interactions between layers and can be trivially applied to new architectures to quantize any linear layers. We evaluate our method on the Qwen3 model family and DeepSeek-V2.5. SINQ improves WikiText2 and C4 perplexity significantly against uncalibrated uniform quantization baselines and can be further enhanced by combining it with calibration and non-uniform quantization levels. Code to reproduce the results of this work and to easily quantize models using SINQ is available at https://github.com/huawei-csl/SINQ.

The prevalent use of too few references for evaluating text-to-text generation is known to bias estimates of their quality ({\it low coverage bias} or LCB). This paper shows that overcoming LCB in Grammatical Error Correction (GEC) evaluation cannot be attained by re-scaling or by increasing the number of references in any feasible range, contrary to previous suggestions. This is due to the long-tailed distribution of valid corrections for a sentence. Concretely, we show that LCB incentivizes GEC systems to avoid correcting even when they can generate a valid correction. Consequently, existing systems obtain comparable or superior performance compared to humans, by making few but targeted changes to the input. Similar effects on Text Simplification further support our claims.

In the realms of computer vision and natural language processing, Large Vision-Language Models (LVLMs) have become indispensable tools, proficient in generating textual descriptions based on visual inputs. Despite their advancements, our investigation reveals a noteworthy bias in the generated content, where the output is primarily influenced by the underlying Large Language Models (LLMs) prior rather than the input image. Our empirical experiments underscore the persistence of this bias, as LVLMs often provide confident answers even in the absence of relevant images or given incongruent visual input. To rectify these biases and redirect the model's focus toward vision information, we introduce two simple, training-free strategies. Firstly, for tasks such as classification or multi-choice question-answering (QA), we propose a ``calibration'' step through affine transformation to adjust the output distribution. This ``Post-Hoc debias'' approach ensures uniform scores for each answer when the image is absent, serving as an effective regularization technique to alleviate the influence of LLM priors. For more intricate open-ended generation tasks, we extend this method to ``Debias sampling'', drawing inspirations from contrastive decoding methods. Furthermore, our investigation sheds light on the instability of LVLMs across various decoding configurations. Through systematic exploration of different settings, we significantly enhance performance, surpassing reported results and raising concerns about the fairness of existing evaluations. Comprehensive experiments substantiate the effectiveness of our proposed strategies in mitigating biases. These strategies not only prove beneficial in minimizing hallucinations but also contribute to the generation of more helpful and precise illustrations.

Autoformalisation (AF) systems map natural language reasoning steps into formal statements in a proof assistant such as Lean. We consider how to assess the faithfulness of these systems. Existing approaches require expensive human-annotated ground truth, or rely on LLM judges or embedding models, which come with limited guarantees of accuracy. In addition, these methods typically only consider inputs that are known to be correct, and therefore do not assess whether the AF translates incorrect inputs faithfully. To address these limitations, we propose a new benchmark for AF faithfulness that is cheap to apply, sound under weak assumptions, and assesses both positive and negative examples. Our method is based on automatically generating perturbed reasoning steps that are designed to be invalid, and then measuring validity preservation on unperturbed steps and invalidity preservation on perturbed steps. We apply our method to eight AF systems across four mathematical datasets, and observe pervasive sycophancy: many AFs "silently correct" invalid inputs into provable statements. The most validity-preserving fine-tuned AFs are also the most sycophantic, suggesting a tension between validity and invalidity preservation in current AF systems.

Despite recent advances in inversion-based editing, text-guided image manipulation remains challenging for diffusion models. The primary bottlenecks include 1) the time-consuming nature of the inversion process; 2) the struggle to balance consistency with accuracy; 3) the lack of compatibility with efficient consistency sampling methods used in consistency models. To address the above issues, we start by asking ourselves if the inversion process can be eliminated for editing. We show that when the initial sample is known, a special variance schedule reduces the denoising step to the same form as the multi-step consistency sampling. We name this Denoising Diffusion Consistent Model (DDCM), and note that it implies a virtual inversion strategy without explicit inversion in sampling. We further unify the attention control mechanisms in a tuning-free framework for text-guided editing. Combining them, we present inversion-free editing (InfEdit), which allows for consistent and faithful editing for both rigid and non-rigid semantic changes, catering to intricate modifications without compromising on the image's integrity and explicit inversion. Through extensive experiments, InfEdit shows strong performance in various editing tasks and also maintains a seamless workflow (less than 3 seconds on one single A40), demonstrating the potential for real-time applications. Project Page: https://sled-group.github.io/InfEdit/

Large Language Models (LLMs) have revolutionized natural language processing tasks. However, their practical application is constrained by substantial memory and computational demands. Post-training quantization (PTQ) is considered an effective method to accelerate LLM inference. Despite its growing popularity in LLM model compression, PTQ deployment faces two major challenges. First, low-bit quantization leads to performance degradation. Second, restricted by the limited integer computing unit type on GPUs, quantized matrix operations with different precisions cannot be effectively accelerated. To address these issues, we introduce a novel arbitrary-bit quantization algorithm and inference framework, ABQ-LLM. It achieves superior performance across various quantization settings and enables efficient arbitrary-precision quantized inference on the GPU. ABQ-LLM introduces several key innovations: (1) a distribution correction method for transformer blocks to mitigate distribution differences caused by full quantization of weights and activations, improving performance at low bit-widths. (2) the bit balance strategy to counteract performance degradation from asymmetric distribution issues at very low bit-widths (e.g., 2-bit). (3) an innovative quantization acceleration framework that reconstructs the quantization matrix multiplication of arbitrary precision combinations based on BTC (Binary TensorCore) equivalents, gets rid of the limitations of INT4/INT8 computing units. ABQ-LLM can convert each component bit width gain into actual acceleration gain, maximizing performance under mixed precision(e.g., W6A6, W2A8). Based on W2*A8 quantization configuration on LLaMA-7B model, it achieved a WikiText2 perplexity of 7.59 (2.17downarrow vs 9.76 in AffineQuant). Compared to SmoothQuant, we realized 1.6times acceleration improvement and 2.7times memory compression gain.

Discrete diffusion models have emerged as a promising direction for vision-language tasks, offering bidirectional context modeling and theoretical parallelization. However, their practical application is severely hindered by a train-inference discrepancy, which leads to catastrophic error cascades: initial token errors during parallel decoding pollute the generation context, triggering a chain reaction of compounding errors and leading to syntactic errors and semantic hallucinations. To address this fundamental challenge, we reframe the generation process from passive denoising to active refining. We introduce ReDiff, a refining-enhanced diffusion framework that teaches the model to identify and correct its own errors. Our approach features a two-stage training process: first, we instill a foundational revision capability by training the model to revise synthetic errors; second, we implement a novel online self-correction loop where the model is explicitly trained to revise its own flawed drafts by learning from an expert's corrections. This mistake-driven learning endows the model with the crucial ability to revisit and refine its already generated output, effectively breaking the error cascade. Extensive experiments demonstrate that ReDiff significantly improves the coherence and factual accuracy of generated content, enabling stable and efficient parallel generation far superior to traditional denoising methods. Our codes and models are available at https://rediff-hku.github.io/.

We present a novel method of performing spelling correction on short input strings, such as search queries or individual words. At its core lies a procedure for generating artificial typos which closely follow the error patterns manifested by humans. This procedure is used to train the production spelling correction model based on a transformer architecture. This model is currently served in the HubSpot product search. We show that our approach to typo generation is superior to the widespread practice of adding noise, which ignores human patterns. We also demonstrate how our approach may be extended to resource-scarce settings and train spelling correction models for Arabic, Greek, Russian, and Setswana languages, without using any labeled data.

Perspective distortion (PD) causes unprecedented changes in shape, size, orientation, angles, and other spatial relationships of visual concepts in images. Precisely estimating camera intrinsic and extrinsic parameters is a challenging task that prevents synthesizing perspective distortion. Non-availability of dedicated training data poses a critical barrier to developing robust computer vision methods. Additionally, distortion correction methods make other computer vision tasks a multi-step approach and lack performance. In this work, we propose mitigating perspective distortion (MPD) by employing a fine-grained parameter control on a specific family of M\"obius transform to model real-world distortion without estimating camera intrinsic and extrinsic parameters and without the need for actual distorted data. Also, we present a dedicated perspectively distorted benchmark dataset, ImageNet-PD, to benchmark the robustness of deep learning models against this new dataset. The proposed method outperforms existing benchmarks, ImageNet-E and ImageNet-X. Additionally, it significantly improves performance on ImageNet-PD while consistently performing on standard data distribution. Notably, our method shows improved performance on three PD-affected real-world applications crowd counting, fisheye image recognition, and person re-identification and one PD-affected challenging CV task: object detection. The source code, dataset, and models are available on the project webpage at https://prakashchhipa.github.io/projects/mpd.

Text image super-resolution (Text-SR) requires more than visually plausible detail synthesis: slight errors in stroke topology may alter character identity and break readability. Existing methods improve text fidelity with stronger recognition-based or generative priors, yet they still face two unresolved challenges under severe degradation: the text condition extracted from low-quality inputs can itself be unreliable, and a plausible global prior does not fully determine fine-grained stroke boundaries. We present PRISM, a single-step diffusion-based Text-SR framework that addresses these two challenges through Flow-Matching Prior Rectification (FMPR) and a Structure-guided Uncertainty-aware Residual Encoder (SURE). FMPR constructs a privileged training-time prior from paired low-quality/high-quality latents and learns a flow matching that transports degraded embeddings toward this restoration-oriented prior space, yielding more accurate and reliable global text guidance. SURE further predicts uncertainty-aware structural residuals to selectively absorb reliable local boundary evidence while suppressing ambiguous stroke cues. Together, these components enable explicit global prior rectification and local structure refinement within a single diffusion restoration pass. Experiments on both synthetic and real-world benchmarks show that PRISM achieves state-of-the-art performance with millisecond-level inference. Our dataset and code will be available at https://github.com/faithxuz/PRISM.

Supervised fine-tuning (SFT) learns most aggressively from tokens that the model deems least likely. This helps acquire new behaviors, but also amplifies noisy or conflicting supervision and can overwrite useful pretrained knowledge. Through a unified policy-loss view, we revisit existing token-reweighting methods and show that they assign nonnegative coefficients to demonstrated tokens. Consequently, they can suppress or amplify supervised updates, but cannot reverse harmful features once learned. Moreover, larger training weights do not amount to feature extrapolation, since they change the optimization trajectory rather than scale a fixed SFT direction. We argue that reversal and extrapolation require a stable reference frame defined by a fixed SFT delta. Motivated by this, we propose SCALE (Selective Control of Adaptation via Local Entropy), an entropy-guided adaptation-strength-control method that freezes the pretrained model and the SFT delta and learns bounded token- and module-specific gates by minimizing predictive entropy alone. These gates suppress, reverse, or extrapolate frozen SFT features according to their alignment with entropy reduction. Across Qwen2.5-Math-1.5B, Qwen2.5-Math-7B, and Qwen3-4B-Base, SCALE achieves mathematical-reasoning averages of 37.84, 43.60, and 36.57, exceeding the strongest corresponding baselines while remaining competitive on general-retention benchmarks. It also attains the best average code-generation performance across HumanEval, HumanEval+, and MBPP for all three models. These results suggest that effective SFT correction can benefit from controlling how already learned residuals are used, rather than only modifying how they are learned.

Large Language Models (LLMs) can correct their self-generated responses, but a decline in accuracy after self-correction is also witnessed. To have a deeper understanding of self-correction, we endeavor to decompose, evaluate, and analyze the self-correction behaviors of LLMs. By enumerating and analyzing answer correctness before and after self-correction, we decompose the self-correction capability into confidence (being confident to correct answers) and critique (turning wrong answers to correct) capabilities, and propose two metrics from a probabilistic perspective to measure these 2 capabilities, along with another metric for overall self-correction capability evaluation. Based on our decomposition and evaluation metrics, we conduct extensive experiments and draw some empirical conclusions. For example, we find different models can exhibit distinct behaviors: some models are confident while others are more critical. We also find the trade-off between the two capabilities (i.e. improving one can lead to a decline in the other) when manipulating model self-correction behavior by prompts or in-context learning. Further, we find a simple yet efficient strategy to improve self-correction capability by transforming Supervision Fine-Tuning (SFT) data format, and our strategy outperforms vanilla SFT in both capabilities and achieves much higher accuracy after self-correction. Our code will be publicly available on GitHub.

Linear position interpolation helps pre-trained models using rotary position embeddings (RoPE) to extrapolate to longer sequence lengths. We propose using linear position interpolation to extend the extrapolation range of models using Attention with Linear Biases (ALiBi). We find position interpolation significantly improves extrapolation capability on upstream language modelling and downstream summarization and retrieval tasks.

Post-training quantization (PTQ) is a widely used approach for reducing the memory and compute costs of large language models (LLMs). Recent studies have shown that applying invertible transformations to activations can significantly improve quantization robustness by reducing activation outliers; however, existing approaches are largely restricted to rotation or Hadamard-based transformations. Moreover, most studies focused primarily on traditional quantization schemes, whereas modern hardware increasingly supports the microscaling (MX) data format. Attempts to combine both showed severe performance degradation, leading prior work to introduce assumptions on the transformations. In this work, we take a complementary perspective. First, we provide a theoretical analysis of transformations under MX quantization by deriving a bound on the quantization error. Our analysis emphasizes the importance of accounting for both the activation distribution and the underlying quantization structure. Building on this analysis, we propose LATMiX, a method that generalizes outlier reduction to learnable invertible affine transformations optimized using standard deep learning tools. Experiments show consistent improvements in average accuracy for MX low-bit quantization over strong baselines on a wide range of zero-shot benchmarks, across multiple model sizes.

Alternating projections (AP) near a clean intersection of smooth manifolds can converge slowly when the Friedrichs angle is small. We develop the Fixed-Point Manifold Acceleration (FPMA) framework for {local convergence and polynomial acceleration of} smooth maps that fix a manifold pointwise. {Under suitable regularity and uniform normal spectral stability, FPMA establishes local R-linear convergence and a smooth limiting map inducing a local retraction. At fixed points, consistent polynomial acceleration with p(1)=1 preserves the selected limit's first-order response to normal initial perturbations whenever the transformed normal blocks are uniformly spectrally stable. Under sufficient smoothness, we give a curvature criterion for second-order induced retractions and show that stable consistent polynomial acceleration preserves both the quadratic retraction expansion and this criterion. {As a special case, we establish new local R-linear convergence guarantees for fixed-degree Chebyshev-accelerated exact AP and second-order induced retractions. For uniform Friedrichs angle θ_Fin(0,π/2), acceleration strictly improves the local convergence rate per AP evaluation. The large-degree limiting spectral factor at fixed θ_F predicts O(θ_F^{-1}) evaluations for fixed relative error reduction as θ_Fdownarrow0, versus O(θ_F^{-2}) for ordinary AP.}} {The framework also covers} inexact, relaxed, and generalized AP {under their respective regularity and stability conditions.}

Self-correction of large language models (LLMs) emerges as a critical component for enhancing their reasoning performance. Although various self-correction methods have been proposed, a comprehensive evaluation of these methods remains largely unexplored, and the question of whether LLMs can truly correct themselves is a matter of significant interest and concern. In this study, we introduce CorrectBench, a benchmark developed to evaluate the effectiveness of self-correction strategies, including intrinsic, external, and fine-tuned approaches, across three tasks: commonsense reasoning, mathematical reasoning, and code generation. Our findings reveal that: 1) Self-correction methods can improve accuracy, especially for complex reasoning tasks; 2) Mixing different self-correction strategies yields further improvements, though it reduces efficiency; 3) Reasoning LLMs (e.g., DeepSeek-R1) have limited optimization under additional self-correction methods and have high time costs. Interestingly, a comparatively simple chain-of-thought (CoT) baseline demonstrates competitive accuracy and efficiency. These results underscore the potential of self-correction to enhance LLM's reasoning performance while highlighting the ongoing challenge of improving their efficiency. Consequently, we advocate for further research focused on optimizing the balance between reasoning capabilities and operational efficiency. Project Page: https://correctbench.github.io/

CLIP has achieved impressive zero-shot performance after pre-training on a large-scale dataset consisting of paired image-text data. Previous works have utilized CLIP by incorporating manually designed visual prompts like colored circles and blur masks into the images to guide the model's attention, showing enhanced zero-shot performance in downstream tasks. Although these methods have achieved promising results, they inevitably alter the original information of the images, which can lead to failure in specific tasks. We propose a train-free method Foveal-Attention CLIP (FALIP), which adjusts the CLIP's attention by inserting foveal attention masks into the multi-head self-attention module. We demonstrate FALIP effectively boosts CLIP zero-shot performance in tasks such as referring expressions comprehension, image classification, and 3D point cloud recognition. Experimental results further show that FALIP outperforms existing methods on most metrics and can augment current methods to enhance their performance.

Instruction-based image editing through natural language has emerged as a powerful paradigm for intuitive visual manipulation. While recent models achieve impressive results on single edits, they suffer from severe quality degradation under multi-turn editing. Through systematic analysis, we identify progressive loss of high-frequency information as the primary cause of this quality degradation. We present FreqEdit, a training-free framework that enables stable editing across 10+ consecutive iterations. Our approach comprises three synergistic components: (1) high-frequency feature injection from reference velocity fields to preserve fine-grained details, (2) an adaptive injection strategy that spatially modulates injection strength for precise region-specific control, and (3) a path compensation mechanism that periodically recalibrates the editing trajectory to prevent over-constraint. Extensive experiments demonstrate that FreqEdit achieves superior performance in both identity preservation and instruction following compared to seven state-of-the-art baselines.

Classifier-free guidance (CFG) is the workhorse for steering large diffusion models toward text-conditioned targets, yet its native application to rectified flow (RF) based models provokes severe off-manifold drift, yielding visual artifacts, text misalignment, and brittle behaviour. We present Rectified-CFG++, an adaptive predictor-corrector guidance that couples the deterministic efficiency of rectified flows with a geometry-aware conditioning rule. Each inference step first executes a conditional RF update that anchors the sample near the learned transport path, then applies a weighted conditional correction that interpolates between conditional and unconditional velocity fields. We prove that the resulting velocity field is marginally consistent and that its trajectories remain within a bounded tubular neighbourhood of the data manifold, ensuring stability across a wide range of guidance strengths. Extensive experiments on large-scale text-to-image models (Flux, Stable Diffusion 3/3.5, Lumina) show that Rectified-CFG++ consistently outperforms standard CFG on benchmark datasets such as MS-COCO, LAION-Aesthetic, and T2I-CompBench. Project page: https://rectified-cfgpp.github.io/

Wavefront shaping is a technique for directing light through turbid media. The theoretical aspects of wavefront shaping are well understood, and under near-ideal experimental conditions, accurate predictions for the expected signal enhancement can be given. In practice, however, there are many experimental factors that negatively affect the outcome of the experiment. Here, we present a comprehensive overview of these experimental factors, including the effect of sample scattering properties, noise, and response of the spatial light modulator. We present simple means to identify experimental imperfections and to minimize their negative effect on the outcome of the experiment. This paper is accompanied by Python code for automatically quantifying experimental problems using the OpenWFS framework for running and simulating wavefront shaping experiments.

Methods based on weight compensation, which iteratively apply quantization and weight compensation to minimize the output error, have recently demonstrated remarkable success in quantizing Large Language Models (LLMs). The representative work, GPTQ, introduces several key techniques that make such iterative methods practical for LLMs with billions of parameters. GPTAQ extends this approach by introducing an asymmetric calibration process that aligns the output of each quantized layer with its full-precision counterpart, incorporating a residual error into the weight compensation framework. In this work, we revisit the formulation of the residual error. We identify a sub-optimal calibration objective in existing methods: during the intra-layer calibration process, they align the quantized output with the output from compensated weights, rather than the true output from the original full-precision model. Therefore, we redefine the objective to precisely align the quantized model's output with the original output of the full-precision model at each step. We then reveal that the residual error originates not only from the output difference of the preceding layer but also from the discrepancy between the compensated and original weights within each layer, which we name the 'compensation-aware error'. By inheriting the neuron decomposition technique from GPTAQ, we can efficiently incorporate this compensation-aware error into the weight update process. Extensive experiments on various LLMs and quantization settings demonstrate that our proposed enhancements integrate seamlessly with both GPTQ and GPTAQ, significantly improving their quantization performance. Our code is publicly available at https://github.com/list0830/ResComp.

Rotary Position Embedding (RoPE) is an efficient position encoding approach and is widely utilized in numerous large language models (LLMs). Recently, a lot of methods have been put forward to further expand the context window based on RoPE. The core concept of those methods is to predefine or search for a set of factors to rescale the base frequencies of RoPE. Nevertheless, it is quite a challenge for existing methods to predefine an optimal factor due to the exponential search space. In view of this, we introduce PSC (Phase Shift Calibration), a small module for calibrating the frequencies predefined by existing methods. With the employment of PSC, we demonstrate that many existing methods can be further enhanced, like PI, YaRN, and LongRoPE. We conducted extensive experiments across multiple models and tasks. The results demonstrate that (1) when PSC is enabled, the comparative reductions in perplexity increase as the context window size is varied from 16k, to 32k, and up to 64k. (2) Our approach is broadly applicable and exhibits robustness across a variety of models and tasks. The code can be found at https://github.com/WNQzhu/PSC.

We analyze the stability of a class of eigensolvers that target interior eigenvalues with rational filters. We show that subspace iteration with a rational filter is robust even when an eigenvalue is near a filter's pole. These dangerous eigenvalues contribute to large round-off errors in the first iteration, but are self-correcting in later iterations. For matrices with orthogonal eigenvectors (e.g., real-symmetric or complex Hermitian), two iterations is enough to reduce round-off errors to the order of the unit-round off. In contrast, Krylov methods accelerated by rational filters with fixed poles typically fail to converge to unit round-off accuracy when an eigenvalue is close to a pole. In the context of Arnoldi with shift-and-invert enhancement, we demonstrate a simple restart strategy that recovers full precision in the target eigenpairs.

Short-recurrence Krylov methods that are equivalent in exact arithmetic often diverge in floating-point arithmetic. To illustrate this, we provide an exactly representable two-cycle for steepest descent with a recursively updated residual. A complementary convergence theorem gives a sufficient condition under which the stored residual decreases geometrically. We then show that a second positive definite family yields different outcomes for a Hestenes--Stiefel Conjugate Gradient (CG) implementation and a direct Lanczos--Galerkin approach. CG finds the exact solution after four updates, whereas the two-step projected system becomes inconsistent. Under stated perturbation and transfer hypotheses, a common spectral enclosure gives comparable convergence bounds. For a dense, left-to-right evaluation order, we prove a sufficient precision bound for a prescribed backward error within n updates for an ntimes n matrix, together with a computable stopping test and specified exponent-range assumptions. We use polynomial estimates and numerical experiments to examine the trade-off between working precision and the number of CG iterations needed to achieve a prescribed backward error. We also compare results on inexact matrix-vector products and preconditioning with the frameworks of Paige and Greenbaum. For block Lanczos, we analyze Householder orthogonalization and singular-value truncation as the block size changes. Under componentwise and normwise error bounds, the computed coefficients satisfy a controlled local recurrence and an exact block Lanczos relation for a nearby symmetric problem in a larger space. A block form of Paige's identity bounds the overlap with a Ritz vector along its residual coordinate direction. An inter-block recurrence describes the evolution of overlap, and a Gram-matrix argument gives a count of additional nearby Ritz values.

Text editing in product posters entails inserting new text or replacing existing text while preserving product appearance, background content, and global composition. Despite recent progress in instruction-based image editing, general-purpose models remain unreliable in this setting: they often omit or incorrectly render the target text, place it over salient products or pre-existing content, and produce structurally distorted or visually inconsistent glyphs. We introduce TextRefine, a task-aligned post-training framework that combines supervised fine-tuning with operation-specific reward optimization to address these complementary failure modes. For text insertion, our text-span-level reward jointly assesses semantic fidelity and target-span coverage, penalizes spatial conflicts with products and existing text, and employs a gated structural constraint to preserve non-text regions. For text replacement, our glyph-level reward leverages the connectionist temporal classification (CTC) posterior of the target character to provide graded supervision for fine-grained defects, including missing strokes, structural deformations, and confusion among visually similar characters. We further introduce OpenTextEdit, a dataset comprising 100K images for text editing in product posters, with multi-text layouts, detailed text attributes, product masks, and challenging low-frequency characters. Extensive experiments on both insertion and replacement demonstrate that TextRefine consistently outperforms the evaluated image editing baselines in textual fidelity, placement reliability, and glyph quality while better preserving source-image content.

We study the problem of mapping parameter-space variance of a 3D Morphable Model (3DMM) to per-vertex variance. Traditionally, per-vertex variance has been used to visually interpret the learnt parameter uncertainty. However, mapping parameter-space variance to per-vertex using sampling or error propagation is computationally expensive. We address this limitation with Closed-form Local Uncertainty Estimation (CLUE), which transforms the parameter-space distribution of 3DMMs to per-vertex through a closed-form approximation. CLUE emerges from applying the law of total variance to the 3DMM formulation and is modular, computationally inexpensive, and accurate. Subsequently, we study integrating CLUE for in-the-wild human mesh recovery training and inference. We note that CLUE uses the geometry of the mesh as an inductive bias when predicting the variance, leading to improved accuracy. Through extensive qualitative and quantitative experiments, we show that when used in training, CLUE (1) outpeforms probabilistic and deterministic baselines on metrics evaluating joints, mesh and uncertainty, and (2) has the highest uncertainty-to-error spearman correlation, with applications including data mining and interpretable uncertainty. Finally, we share SAM 3D Body (CLUE) which augments the regressor with high resolution uncertainty maps. We make our code available at https://github.com/vita-epfl/CLUE

We tackle the problem of estimating a Manhattan frame, i.e. three orthogonal vanishing points, and the unknown focal length of the camera, leveraging a prior vertical direction. The direction can come from an Inertial Measurement Unit that is a standard component of recent consumer devices, e.g., smartphones. We provide an exhaustive analysis of minimal line configurations and derive two new 2-line solvers, one of which does not suffer from singularities affecting existing solvers. Additionally, we design a new non-minimal method, running on an arbitrary number of lines, to boost the performance in local optimization. Combining all solvers in a hybrid robust estimator, our method achieves increased accuracy even with a rough prior. Experiments on synthetic and real-world datasets demonstrate the superior accuracy of our method compared to the state of the art, while having comparable runtimes. We further demonstrate the applicability of our solvers for relative rotation estimation. The code is available at https://github.com/cvg/VP-Estimation-with-Prior-Gravity.

Text-to-Image Diffusion Models such as Stable-Diffusion and Imagen have achieved unprecedented quality of photorealism with state-of-the-art FID scores on MS-COCO and other generation benchmarks. Given a caption, image generation requires fine-grained knowledge about attributes such as object structure, style, and viewpoint amongst others. Where does this information reside in text-to-image generative models? In our paper, we tackle this question and understand how knowledge corresponding to distinct visual attributes is stored in large-scale text-to-image diffusion models. We adapt Causal Mediation Analysis for text-to-image models and trace knowledge about distinct visual attributes to various (causal) components in the (i) UNet and (ii) text-encoder of the diffusion model. In particular, we show that unlike generative large-language models, knowledge about different attributes is not localized in isolated components, but is instead distributed amongst a set of components in the conditional UNet. These sets of components are often distinct for different visual attributes. Remarkably, we find that the CLIP text-encoder in public text-to-image models such as Stable-Diffusion contains only one causal state across different visual attributes, and this is the first self-attention layer corresponding to the last subject token of the attribute in the caption. This is in stark contrast to the causal states in other language models which are often the mid-MLP layers. Based on this observation of only one causal state in the text-encoder, we introduce a fast, data-free model editing method Diff-QuickFix which can effectively edit concepts in text-to-image models. DiffQuickFix can edit (ablate) concepts in under a second with a closed-form update, providing a significant 1000x speedup and comparable editing performance to existing fine-tuning based editing methods.

Despite recent advances in inversion and instruction-based image editing, existing approaches primarily excel at editing single, prominent objects but significantly struggle when applied to complex scenes containing multiple entities. To quantify this gap, we first introduce RefEdit-Bench, a rigorous real-world benchmark rooted in RefCOCO, where even baselines trained on millions of samples perform poorly. To overcome this limitation, we introduce RefEdit -- an instruction-based editing model trained on our scalable synthetic data generation pipeline. Our RefEdit, trained on only 20,000 editing triplets, outperforms the Flux/SD3 model-based baselines trained on millions of data. Extensive evaluations across various benchmarks demonstrate that our model not only excels in referring expression tasks but also enhances performance on traditional benchmarks, achieving state-of-the-art results comparable to closed-source methods. We release data \& checkpoint for reproducibility.

Large language models (LLMs) have demonstrated remarkable reasoning capability in solving mathematical problems. However, existing approaches primarily focus on improving the quality of correct training data, e.g., distilling high-quality correct solutions from advanced models, neglecting the value contained in error data, potentially hindering the model's reflective ability. Though some studies attempt to leverage error data, they often involve complex mechanisms, such as Monte Carlo Tree Search (MCTS) to explore error nodes. In this work, we propose to enhance LLMs' reasoning ability by Learning from Errors for Mathematical Advancement (LEMMA). LEMMA constructs data consisting of an incorrect solution with an erroneous step and a reflection connection to a correct solution for fine-tuning. Specifically, we systematically analyze the model-generated error types and introduce an error-type grounded mistake augmentation method to collect diverse and representative errors. Correct solutions are either from fixing the errors or generating a fresh start. Through a model-aware smooth reflection connection, the erroneous solution is transferred to the correct one. By fine-tuning on the constructed dataset, the model is able to self-correct errors autonomously within the generation process without relying on external critique models. Experimental results demonstrate that LEMMA achieves significant performance improvements over other strong baselines.

Existing certified training methods can only train models to be robust against a certain perturbation type (e.g. l_infty or l_2). However, an l_infty certifiably robust model may not be certifiably robust against l_2 perturbation (and vice versa) and also has low robustness against other perturbations (e.g. geometric and patch transformation). By constructing a theoretical framework to analyze and mitigate the tradeoff, we propose the first multi-norm certified training framework CURE, consisting of several multi-norm certified training methods, to attain better union robustness when training from scratch or fine-tuning a pre-trained certified model. Inspired by our theoretical findings, we devise bound alignment and connect natural training with certified training for better union robustness. Compared with SOTA-certified training, CURE improves union robustness to 32.0% on MNIST, 25.8% on CIFAR-10, and 10.6% on TinyImagenet across different epsilon values. It leads to better generalization on a diverse set of challenging unseen geometric and patch perturbations to 6.8% and 16.0% on CIFAR-10. Overall, our contributions pave a path towards universal certified robustness.

We propose MoGe-2, an advanced open-domain geometry estimation model that recovers a metric scale 3D point map of a scene from a single image. Our method builds upon the recent monocular geometry estimation approach, MoGe, which predicts affine-invariant point maps with unknown scales. We explore effective strategies to extend MoGe for metric geometry prediction without compromising the relative geometry accuracy provided by the affine-invariant point representation. Additionally, we discover that noise and errors in real data diminish fine-grained detail in the predicted geometry. We address this by developing a unified data refinement approach that filters and completes real data from different sources using sharp synthetic labels, significantly enhancing the granularity of the reconstructed geometry while maintaining the overall accuracy. We train our model on a large corpus of mixed datasets and conducted comprehensive evaluations, demonstrating its superior performance in achieving accurate relative geometry, precise metric scale, and fine-grained detail recovery -- capabilities that no previous methods have simultaneously achieved.

Large language models (LLMs) now write code in settings where misreading a single word can break safety or cost money, yet we still expect them to overlook stray typos. To probe where useful robustness ends and harmful insensitivity begins, we compile 50 LeetCode problems and craft three minimal prompt perturbations that should vary in importance: (i) progressive underspecification deleting 10 % of words per step; (ii) lexical flip swapping a pivotal quantifier ("max" to "min"); and (iii) jargon inflation replacing a common noun with an obscure technical synonym. Six frontier models, including three "reasoning-tuned" versions, solve each mutated prompt, and their Python outputs are checked against the original test suites to reveal whether they reused the baseline solution or adapted. Among 11 853 generations we observe a sharp double asymmetry. Models remain correct in 85 % of cases even after 90 % of the prompt is missing, showing over-robustness to underspecification, yet only 54 % react to a single quantifier flip that reverses the task, with reasoning-tuned variants even less sensitive than their bases. Jargon edits lie in between, passing through 56 %. Current LLMs thus blur the line between harmless noise and meaning - changing edits, often treating both as ignorable. Masking salient anchors such as function names can force re - evaluation. We advocate evaluation and training protocols that reward differential sensitivity: stay steady under benign noise but adapt - or refuse - when semantics truly change.

The advancement of image editing tools has enabled malicious manipulation of sensitive document images, underscoring the need for robust document image forgery detection.Though forgery detectors for natural images have been extensively studied, they struggle with document images, as the tampered regions can be seamlessly blended into the uniform document background (BG) and structured text. On the other hand, existing document-specific methods lack sufficient robustness against various degradations, which limits their practical deployment. This paper presents ADCD-Net, a robust document forgery localization model that adaptively leverages the RGB/DCT forensic traces and integrates key characteristics of document images. Specifically, to address the DCT traces' sensitivity to block misalignment, we adaptively modulate the DCT feature contribution based on a predicted alignment score, resulting in much improved resilience to various distortions, including resizing and cropping. Also, a hierarchical content disentanglement approach is proposed to boost the localization performance via mitigating the text-BG disparities. Furthermore, noticing the predominantly pristine nature of BG regions, we construct a pristine prototype capturing traces of untampered regions, and eventually enhance both the localization accuracy and robustness. Our proposed ADCD-Net demonstrates superior forgery localization performance, consistently outperforming state-of-the-art methods by 20.79\% averaged over 5 types of distortions. The code is available at https://github.com/KAHIMWONG/ACDC-Net.

We study single-error detection and correction for analog codes over R. The key performance measures are the parameters Γ_1(C) and Γ_2(C), which quantify, respectively, the minimum separation required between large outlying errors that must be detected or located and the magnitude of tolerable perturbations. First, we prove that every real linear [n,k] code C satisfies \[ Γ_1(C)\ge 2\left\lceiln{n-k}\right\rceil. \] Moreover, when k=n-2, we prove that every real linear [n,n-2] code C satisfies \[ Γ_2(C)\ge 1{\sin^2(π/2n)}. \] Together, these two lower bounds settle all four open problems of Roth concerning the optimality of single-error-detecting and single-error-correcting analog codes. The proof of the first bound is based on a double-induction argument, while the proof of the second combines a zonotope-based geometric characterization of Γ_2(C) with a cyclic sine-product inequality. In addition, we construct analog codes with higher fixed redundancy and show that, for every fixed rge 2, there exists a class of linear [n,ge n-r] codes over R such that \[ Γ_2(C)\le O\left(n^{1+1{r-1}}\right). \] This gives a new upper bound in the fixed-redundancy regime, which was not covered by previously known constructions.

Existing perceptual similarity metrics assume an image and its reference are well aligned. As a result, these metrics are often sensitive to a small alignment error that is imperceptible to the human eyes. This paper studies the effect of small misalignment, specifically a small shift between the input and reference image, on existing metrics, and accordingly develops a shift-tolerant similarity metric. This paper builds upon LPIPS, a widely used learned perceptual similarity metric, and explores architectural design considerations to make it robust against imperceptible misalignment. Specifically, we study a wide spectrum of neural network elements, such as anti-aliasing filtering, pooling, striding, padding, and skip connection, and discuss their roles in making a robust metric. Based on our studies, we develop a new deep neural network-based perceptual similarity metric. Our experiments show that our metric is tolerant to imperceptible shifts while being consistent with the human similarity judgment.

CLIP is a discriminative model trained to align images and text in a shared embedding space. Due to its multimodal structure, it serves as the backbone of many generative pipelines, where a decoder is trained to map from the shared space back to images. In this work, we show that image synthesis is nevertheless possible using CLIP alone -- without any decoder, training, or fine-tuning. Our approach optimizes a frequency-aware implicit neural representation that encourages coarse-to-fine generation by stratifying frequencies across network layers. To stabilize this inverse mapping, we introduce adversarially robust initialization, a lightweight Orthogonal Procrustes projection to align local text and image embeddings, and a blending loss that anchors outputs to natural image statistics. Without altering CLIP's weights, this framework unlocks capabilities such as text-to-image generation, style transfer, and image reconstruction. These findings suggest that discriminative models may hold untapped generative potential, hidden in plain sight.

The antenna-elements that make up a radio interferometer form a spatial filter that samples components of the Fourier transform of a target radio astronomical source brightness. Along the signal path, there are multiplicative and additive perturbation effects that alter the signal and that should be corrected. The process of mitigating these perturbation effects is called calibration. In this work, we develop a new and fast Maximum Likelihood based estimator of these perturbation effects using the Exponential Map and Lie groups. To evaluate its performance, we compare it to the Cramér-Rao Lower Bound and, to test the estimation time, we compare it with the Expectation Maximization algorithm, another fast Maximum Likelihood estimator. Finally, we apply our estimator to a real observation of the protoplanetary disk AS 209 made with the Submillimeter Array. We found that our proposed estimator meets the Cramér-Rao Lower Bound and it was approximately 40 times faster than the Expectation Maximization algorithm.

A fundamental challenge in data science is to match disparate point sets with each other. While optimal transport efficiently minimizes point displacements under a bijectivity constraint, it is inherently sensitive to rotations. Conversely, minimizing distortions via the Gromov-Wasserstein (GW) framework addresses this limitation but introduces a non-convex, computationally demanding optimization problem. In this work, we identify a broad class of distortion penalties that reduce to a simple alignment problem within a lifted feature space. Leveraging this insight, we introduce an iterative GW solver with a linear memory footprint and quadratic (rather than cubic) time complexity. Our method is differentiable, comes with strong theoretical guarantees, and scales to hundreds of thousands of points in minutes. This efficiency unlocks a wide range of geometric applications and enables the exploration of the GW energy landscape, whose local minima encode the symmetries of the matching problem.

Seven years ago, researchers proposed a postprocessing method to equalize the error rates of a model across different demographic groups. The work launched hundreds of papers purporting to improve over the postprocessing baseline. We empirically evaluate these claims through thousands of model evaluations on several tabular datasets. We find that the fairness-accuracy Pareto frontier achieved by postprocessing contains all other methods we were feasibly able to evaluate. In doing so, we address two common methodological errors that have confounded previous observations. One relates to the comparison of methods with different unconstrained base models. The other concerns methods achieving different levels of constraint relaxation. At the heart of our study is a simple idea we call unprocessing that roughly corresponds to the inverse of postprocessing. Unprocessing allows for a direct comparison of methods using different underlying models and levels of relaxation.

Fine-tuning a large language model on new data degrades what it previously learned. We present Omega-S, a drop-in penalty computed from the weight matrix alone: it needs no previous-task data, no Fisher matrix and no stored copy of the old weights. It is three lines in an existing training loop and adds under 4% to the cost of a step. Retention. On Llama-3-8B with LoRA, fine-tuned from code to prose and measured by HumanEval over ten seeds, Omega-S retains more of the original capability than no regularisation on 9 of 10 seeds (0.173 -> 0.238 absolute pass@1; sign test one-sided p=0.011, Wilcoxon p=0.006), as a retention ratio, 62.9% -> 84.1%. It also beats tuned weight decay on 10 of 10 seeds (p=0.002) and tuned EWC on 8 of 10 (p=0.014), every arm re-measured in the same session. Mechanism, measured rather than asserted. Omega-S is topological by construction, its objective built from Tr(A^3), but we measured which of its four factors actually moves and three do not: their elasticity with respect to the weights is at or below 1e-4, against 9e-3 for the degree-variance term. As implemented, the composite reduces to a penalty on the variance of node degrees, which means row magnitude in square modules and directional alignment in non-square ones. We report this because a method whose name promises one thing and whose gradient does another should say so. We also enumerate the open design choices, including a contrast-preserving construction that does what it was designed to do and makes retention worse on all ten seeds. Repeating an identical configuration, same seed and same hardware, gives a standard deviation of 0.104 in retention ratio. We have not found this quantified for low-rank fine-tuning of language models, and it bounds every seed-paired comparison in this literature, ours included. Code, per-seed results and the full record of negative results are available.

Generating 2-by-2 unitary matrices in floating-precision arithmetic is a delicate task. One way to reduce the accumulation error is to use less floating-point operations to compute each of the entries in the 2-by-2 unitary matrix. This paper shows an algorithm that reduces the number of operations to compute the entries of a Givens rotation. Overall, the new algorithm has more operations in total when compared to algorithms in different releases of LAPACK, but less operations per entry. Numerical tests show that the new algorithm is more accurate on average.

Diffusion models typically suffer from error accumulation during iterative sampling, commonly referred to as exposure bias. We reveal systematic frequency-dependent discrepancies between training and inference, which can be interpreted as frequency-dependent SNR error. Crucially, the direction of this mismatch varies across models and timesteps, indicating that fixed correction rules do not generalize. We propose Spectral Alignment (SPA), a lightweight, guidance-based method that calibrates the power spectrum of intermediate predictions to a pre-computed prior. Our approach consists of two stages: (1) offline fitting of a parametric spectrum model from training data, and (2) inference-time guidance via efficient FFT-based gradient computation. SPA introduces minimal computational overhead (3-4\%) and is complementary to Classifier-Free Guidance (CFG). We demonstrate consistent improvements across diverse architectures, from pixel-space models (DDPM, ADM) to latent diffusion models (SD2.0, SDXL) and flow-matching models (SD3.5, FLUX). Our implementation is available at https://github.com/SonyResearch/SPA.

Document images are now widely captured by handheld devices such as mobile phones. The OCR performance on these images are largely affected due to geometric distortion of the document paper, diverse camera positions and complex backgrounds. In this paper, we propose a simple yet effective approach to rectify distorted document image by estimating control points and reference points. After that, we use interpolation method between control points and reference points to convert sparse mappings to backward mapping, and remap the original distorted document image to the rectified image. Furthermore, control points are controllable to facilitate interaction or subsequent adjustment. We can flexibly select post-processing methods and the number of vertices according to different application scenarios. Experiments show that our approach can rectify document images with various distortion types, and yield state-of-the-art performance on real-world dataset. This paper also provides a training dataset based on control points for document dewarping. Both the code and the dataset are released at https://github.com/gwxie/Document-Dewarping-with-Control-Points.

We investigate the recovery of vectors from magnitudes of frame coefficients when the frames have a low redundancy, meaning a small number of frame vectors compared to the dimension of the Hilbert space. We first show that for vectors in d dimensions, 4d-4 suitably chosen frame vectors are sufficient to uniquely determine each signal, up to an overall unimodular constant, from the magnitudes of its frame coefficients. Then we discuss the effect of noise and show that 8d-4 frame vectors provide a stable recovery if part of the frame coefficients is bounded away from zero. In this regime, perturbing the magnitudes of the frame coefficients by noise that is sufficiently small results in a recovery error that is at most proportional to the noise level.

Text-based image editing has advanced significantly in recent years. With the rise of diffusion models, image editing via textual instructions has become ubiquitous. Unfortunately, current models lack the ability to customize the quantity of the change per pixel or per image fragment, resorting to changing the entire image in an equal amount, or editing a specific region using a binary mask. In this paper, we suggest a new framework which enables the user to customize the quantity of change for each image fragment, thereby enhancing the flexibility and verbosity of modern diffusion models. Our framework does not require model training or fine-tuning, but instead performs everything at inference time, making it easily applicable to an existing model. We show both qualitatively and quantitatively that our method allows better controllability and can produce results which are unattainable by existing models. Our code is available at: https://github.com/exx8/differential-diffusion

Recent 3D face editing methods using masks have produced high-quality edited images by leveraging Neural Radiance Fields (NeRF). Despite their impressive performance, existing methods often provide limited user control due to the use of pre-trained segmentation masks. To utilize masks with a desired layout, an extensive training dataset is required, which is challenging to gather. We present FFaceNeRF, a NeRF-based face editing technique that can overcome the challenge of limited user control due to the use of fixed mask layouts. Our method employs a geometry adapter with feature injection, allowing for effective manipulation of geometry attributes. Additionally, we adopt latent mixing for tri-plane augmentation, which enables training with a few samples. This facilitates rapid model adaptation to desired mask layouts, crucial for applications in fields like personalized medical imaging or creative face editing. Our comparative evaluations demonstrate that FFaceNeRF surpasses existing mask based face editing methods in terms of flexibility, control, and generated image quality, paving the way for future advancements in customized and high-fidelity 3D face editing. The code is available on the {https://kwanyun.github.io/FFaceNeRF_page/{project-page}}.

Diffusion large language models (dLLMs), which offer bidirectional context and flexible masked-denoising generation, are emerging as a compelling alternative to autoregressive (AR) LLMs. However, like AR LLMs, their model sizes continue to grow, motivating weight compression for deployment. Although post-training quantization (PTQ) is effective for AR LLMs, directly transferring it to dLLMs at 2-bit leads to unsatisfactory performance. To tackle these challenges, we propose Quant-dLLM, an ultra-low-bit PTQ framework tailored to dLLMs. Since masked-denoising activations in dLLMs differ from the fully visible signals assumed by standard PTQ methods, we introduce Masked Calibration Simulation (MCS) to align calibration with the timestep-dependent masking, which yields more reliable calibrations. Moreover, we propose a Data-aware Any-order Quantizer (DAQ) that learns ultra-low-bit weight representations via an optimization algorithm. It performs iterative approximation guided by our simulated calibration data. In addition, under a strict 2-bit budget, we introduce Adaptive Blockwise Mixed Precision (ABMP), a sensitivity-based precision allocation scheme that adaptively assigns bit width across channel groups. When restricted to 2-bit precision, Quant-dLLM consistently achieves higher accuracy than state-of-the-art (SOTA) AR-transfer PTQ methods on dLLMs. The code and models will be available at: https://github.com/ZTA2785/Quant-dLLM.

This paper presents a novel preconditioning strategy for the classic 8-point algorithm (8-PA) for estimating an essential matrix from 360-FoV images (i.e., equirectangular images) in spherical projection. To alleviate the effect of uneven key-feature distributions and outlier correspondences, which can potentially decrease the accuracy of an essential matrix, our method optimizes a non-rigid transformation to deform a spherical camera into a new spatial domain, defining a new constraint and a more robust and accurate solution for an essential matrix. Through several experiments using random synthetic points, 360-FoV, and fish-eye images, we demonstrate that our normalization can increase the camera pose accuracy by about 20% without significantly overhead the computation time. In addition, we present further benefits of our method through both a constant weighted least-square optimization that improves further the well known Gold Standard Method (GSM) (i.e., the non-linear optimization by using epipolar errors); and a relaxation of the number of RANSAC iterations, both showing that our normalization outcomes a more reliable, robust, and accurate solution.