new

Get trending papers in your email inbox!

Subscribe

Daily Papers

byAK and the research community

Oct 16

Asymptotic Safety in Gauge Theories beyond Four Dimensions: Perturbative Tests and Fixed-Point Mergers

Non-Abelian gauge theories above four dimensions may admit an interacting ultraviolet fixed point through the competition between canonical scaling and gauge-field antiscreening. Using the four-loop mathrm{MS} beta function continued to D=4+2ε, we determine the largest dimension D_{pt}=4+2ε_{pt} below which successive loop corrections to the fixed point remain hierarchically ordered under a specified ratio criterion, and map D_{pt} over color and flavor numbers for fermions in the fundamental representation of SU(N). At D=5, we construct rational anomalous dimensions with a fixed, pole-regularized denominator inspired by the functional renormalization group (fRG). Matching to the mathrm{MS} series through one, two, and three loops produces progressively smaller shifts in the critical flavor number and coupling at the ultraviolet--infrared merger (the point where the infrared and ultraviolet fixed points coincide), yielding N_f^{cr}simeq 2.09 , N at large N in the three-loop construction. This low-order stabilization, together with qualitative evidence from fRG flows including higher gauge operators, suggests a potential merger scenario that bounds the candidate asymptotically safe region in flavor number. The resulting color--flavor map provides guidance for five-dimensional model building by displaying both the baseline perturbative-control boundary and the candidate three-loop merger boundary. Four-loop matching, however, retains an interacting ultraviolet fixed point beyond the three-loop merger boundary, with no merger found for integer 2le Nle15 and 0le N_f/Nle11/2. The sensitivity of the fixed-point structure to higher-order terms leaves both scenarios open, highlighting fixed-point annihilation as a potential constraint on five-dimensional asymptotic safety.

  • 5 authors
·
Oct 7

Analytic Solution for the Helicity Evolution Equations at Small $x$ and Large $N_c\&N_f$

We construct an exact analytic solution of the revised small-x helicity evolution equations, where the contributions of the quark-to-gluon and gluon-to-quark transition operators were newly included. These evolution equations are written in the large-N_c&N_f limit and are double-logarithmic, resumming powers of alpha_sln^2(1/x). Here N_c and N_f are the numbers of quark colors and flavors, while alpha_s is the strong coupling constant and x is the Bjorken-x variable. Using our solution, we obtain analytic expressions for the flavor singlet quark and gluon helicity parton distribution functions (PDFs) and for the g_1 structure function as double-inverse Laplace transforms. We also extract analytic expressions for the four DGLAP polarized anomalous dimensions Delta gamma_{qq}, Delta gamma_{qG}, Delta gamma_{Gq}, and Delta gamma_{GG}: these expressions resum powers of alpha_s/omega^2 to all orders at large-N_c&N_f (with omega the Mellin moment variable). We extract the leading small-x growth of the helicity distributions, align \Delta\Sigma(x,Q^2) \sim \Delta G(x,Q^2)\sim g_1(x,Q^2) \sim \left(1{x}\right)^{\alpha_h}, align where the intercept alpha_h satisfies an algebraic equation. We determine alpha_h numerically for various values of N_c and N_f. We further obtain the explicit asymptotic expressions for the helicity distributions, which yield numerical values for the ratio of the gluon helicity PDF to the flavor singlet quark helicity PDF in the small-x asymptotic limit (for different N_f/N_c). We find that all our predictions for polarized DGLAP anomalous dimensions are fully consistent with the existing finite-order calculations. Similar to the large-N_c case, our intercept alpha_h exhibits a very slight disagreement with the predictions made within the infrared evolution equations framework.

  • 2 authors
·
Jul 31, 2025

Fisher Curvature Scaling at Critical Points: An Exact Information-Geometric Exponent from Periodic Boundary Conditions

We study the scalar curvature of the Fisher information metric on the microscopic coupling-parameter manifold of lattice spin models at criticality. For a d-dimensional lattice with periodic boundary conditions and n = L^d sites, the Fisher manifold has m = d cdot n dimensions (one per bond), and we find |R(J_c)| sim n^{d_R} with d_R = (dν+ 2η)/(dν+ η), where ν and η are the correlation-length and anomalous-dimension critical exponents. For 2D Ising (ν= 1, η= 1/4), this predicts d_R = 10/9, confirmed by exact transfer-matrix computations (L = 6--9: d_R = 1.1115 pm 0.0002) and multi-seed MCMC through L = 24. For 3D Ising (ν= 0.630, η= 0.0363), the prediction d_R = 1.019 is consistent with MCMC on L^3 tori up to L = 10 (power-law fit: d_R = 1.040). For 2D Potts q = 3 (predicted 33/29 approx 1.138), FFT-MCMC through L = 40 shows d_eff oscillating non-monotonically around sim 1.20, consistent with O(1/(ln L)^2) logarithmic corrections. For q = 4 (predicted 22/19), effective exponents oscillate with strong logarithmic corrections. The Ricci decomposition identity R_3 = -R_1/2, R_4 = -R_2/2 holds to 5--6 digits for all models. This exponent is distinct from Ruppeiner thermodynamic curvature and reflects the collective geometry of the growing Fisher manifold. We provide falsification criteria and predictions for additional universality classes.

  • 1 authors
·
Mar 8

High-throughput calculations of magnetic topological materials

The discoveries of intrinsically magnetic topological materials, including semimetals with a large anomalous Hall effect and axion insulators, have directed fundamental research in solid-state materials. Topological quantum chemistry has enabled the understanding of and the search for paramagnetic topological materials. Using magnetic topological indices obtained from magnetic topological quantum chemistry (MTQC), here we perform a high-throughput search for magnetic topological materials based on first-principles calculations. We use as our starting point the Magnetic Materials Database on the Bilbao Crystallographic Server, which contains more than 549 magnetic compounds with magnetic structures deduced from neutron-scattering experiments, and identify 130 enforced semimetals (for which the band crossings are implied by symmetry eigenvalues), and topological insulators. For each compound, we perform complete electronic structure calculations, which include complete topological phase diagrams using different values of the Hubbard potential. Using a custom code to find the magnetic co-representations of all bands in all magnetic space groups, we generate data to be fed into the algorithm of MTQC to determine the topology of each magnetic material. Several of these materials display previously unknown topological phases, including symmetry-indicated magnetic semimetals, three-dimensional anomalous Hall insulators and higher-order magnetic semimetals. We analyse topological trends in the materials under varying interactions: 60 per cent of the 130 topological materials have topologies sensitive to interactions, and the others have stable topologies under varying interactions. We provide a materials database for future experimental studies and open-source code for diagnosing topologies of magnetic materials.

  • 9 authors
·
Feb 28, 2020

Robust Spectral Anomaly Detection in EELS Spectral Images via Three Dimensional Convolutional Variational Autoencoders

We introduce a Three-Dimensional Convolutional Variational Autoencoder (3D-CVAE) for automated anomaly detection in Electron Energy Loss Spectroscopy Spectrum Imaging (EELS-SI) data. Our approach leverages the full three-dimensional structure of EELS-SI data to detect subtle spectral anomalies while preserving both spatial and spectral correlations across the datacube. By employing negative log-likelihood loss and training on bulk spectra, the model learns to reconstruct bulk features characteristic of the defect-free material. In exploring methods for anomaly detection, we evaluated both our 3D-CVAE approach and Principal Component Analysis (PCA), testing their performance using Fe L-edge peak shifts designed to simulate material defects. Our results show that 3D-CVAE achieves superior anomaly detection and maintains consistent performance across various shift magnitudes. The method demonstrates clear bimodal separation between normal and anomalous spectra, enabling reliable classification. Further analysis verifies that lower dimensional representations are robust to anomalies in the data. While performance advantages over PCA diminish with decreasing anomaly concentration, our method maintains high reconstruction quality even in challenging, noise-dominated spectral regions. This approach provides a robust framework for unsupervised automated detection of spectral anomalies in EELS-SI data, particularly valuable for analyzing complex material systems.

  • 3 authors
·
Dec 16, 2024

Plug-and-Play 1.x-Bit KV Cache Quantization for Video Large Language Models

Video large language models (VideoLLMs) have demonstrated the capability to process longer video inputs and enable complex reasoning and analysis. However, due to the thousands of visual tokens from the video frames, key-value (KV) cache can significantly increase memory requirements, becoming a bottleneck for inference speed and memory usage. KV cache quantization is a widely used approach to address this problem. In this paper, we find that 2-bit KV quantization of VideoLLMs can hardly hurt the model performance, while the limit of KV cache quantization in even lower bits has not been investigated. To bridge this gap, we introduce VidKV, a plug-and-play KV cache quantization method to compress the KV cache to lower than 2 bits. Specifically, (1) for key, we propose a mixed-precision quantization strategy in the channel dimension, where we perform 2-bit quantization for anomalous channels and 1-bit quantization combined with FFT for normal channels; (2) for value, we implement 1.58-bit quantization while selectively filtering semantically salient visual tokens for targeted preservation, for a better trade-off between precision and model performance. Importantly, our findings suggest that the value cache of VideoLLMs should be quantized in a per-channel fashion instead of the per-token fashion proposed by prior KV cache quantization works for LLMs. Empirically, extensive results with LLaVA-OV-7B and Qwen2.5-VL-7B on six benchmarks show that VidKV effectively compresses the KV cache to 1.5-bit and 1.58-bit precision with almost no performance drop compared to the FP16 counterparts.

  • 5 authors
·
Mar 20, 2025 3

Anomaly-mediated Scalar Gravitational Interactions and the Coupling of Conformal Sectors

We investigate the anomaly-induced activation of a gauge-invariant scalar degree of freedom in General Relativity, the conformalon mode, directly at the level of \(2\to2\) scattering amplitudes. The analysis couples anomalous three-point functions of conformal sectors, involving gravitons \((TTT)\) and Abelian gauge currents \((TJJ)\), through single-graviton exchange derived from the quadratic expansion of the Einstein--Hilbert action. Unlike related treatments based on the nonlocal anomaly action, these interactions are suppressed by the Planck scale. We show that the conformalon, invariant under linearized diffeomorphisms, admits an interpretation as an effective scalar correction to scattering amplitudes, both in virtual exchange channels and in effective real-emission processes. Around flat space, this behaviour arises from anomaly-induced nonlocal massless insertions on the external graviton and photon legs of the three-point functions, sewn through the scalar component of the graviton propagator in de Donder gauge. The resulting anomaly-mediated \(4\)-point interaction reduces to contact terms, with the Planck mass setting the suppression scale. The construction consistently matches the spin decomposition of flat-space conformal Ward identities in momentum space, which determine the vertices, with the corresponding spin decomposition of the graviton propagator. In the eikonal limit, these interactions generate contact corrections to the leading logarithmic phase in impact-parameter space. We further show that anomaly-mediated \(2\to2\) graviton amplitudes associated with the virtual exchange of such modes exhibit a characteristic double-copy structure.

  • 4 authors
·
Mar 31

Are we certain it's anomalous?

The progress in modelling time series and, more generally, sequences of structured data has recently revamped research in anomaly detection. The task stands for identifying abnormal behaviors in financial series, IT systems, aerospace measurements, and the medical domain, where anomaly detection may aid in isolating cases of depression and attend the elderly. Anomaly detection in time series is a complex task since anomalies are rare due to highly non-linear temporal correlations and since the definition of anomalous is sometimes subjective. Here we propose the novel use of Hyperbolic uncertainty for Anomaly Detection (HypAD). HypAD learns self-supervisedly to reconstruct the input signal. We adopt best practices from the state-of-the-art to encode the sequence by an LSTM, jointly learned with a decoder to reconstruct the signal, with the aid of GAN critics. Uncertainty is estimated end-to-end by means of a hyperbolic neural network. By using uncertainty, HypAD may assess whether it is certain about the input signal but it fails to reconstruct it because this is anomalous; or whether the reconstruction error does not necessarily imply anomaly, as the model is uncertain, e.g. a complex but regular input signal. The novel key idea is that a detectable anomaly is one where the model is certain but it predicts wrongly. HypAD outperforms the current state-of-the-art for univariate anomaly detection on established benchmarks based on data from NASA, Yahoo, Numenta, Amazon, and Twitter. It also yields state-of-the-art performance on a multivariate dataset of anomaly activities in elderly home residences, and it outperforms the baseline on SWaT. Overall, HypAD yields the lowest false alarms at the best performance rate, thanks to successfully identifying detectable anomalies.

  • 7 authors
·
Nov 16, 2022

More on the Weak Gravity Conjecture via Convexity of Charged Operators

The Weak Gravity Conjecture has recently been re-formulated in terms of a particle with non-negative self-binding energy. Because of the dual conformal field theory (CFT) formulation in the anti-de Sitter space the conformal dimension Delta (Q) of the lowest-dimension operator with charge Q under some global U(1) symmetry must be a convex function of Q. This property has been conjectured to hold for any (unitary) conformal field theory and generalized to larger global symmetry groups. Here we refine and further test the convex charge conjecture via semiclassical computations for fixed charge sectors of different theories in different dimensions. We analyze the convexity properties of the leading and next-to-leading order terms stemming from the semiclassical computation, de facto, extending previous tests beyond the leading perturbative contributions and to arbitrary charges. In particular, the leading contribution is sufficient to test convexity in the semiclassical computations. We also consider intriguing cases in which the models feature a transition from real to complex conformal dimensions either as a function of the charge or number of matter fields. As a relevant example of the first kind, we investigate the O(N) model in 4+epsilon dimensions. As an example of the second type we consider the U(N)times U(M) model in 4-epsilon dimensions. Both models display a rich dynamics where, by changing the number of matter fields and/or charge, one can achieve dramatically different physical regimes. We discover that whenever a complex conformal dimension appears, the real part satisfies the convexity property.

  • 5 authors
·
Sep 10, 2021

Examining the Source of Defects from a Mechanical Perspective for 3D Anomaly Detection

In this paper, we explore a novel approach to 3D anomaly detection (AD) that goes beyond merely identifying anomalies based on structural characteristics. Our primary perspective is that most anomalies arise from unpredictable defective forces originating from both internal and external sources. To address these anomalies, we seek out opposing forces that can help correct them. Therefore, we introduce the Mechanics Complementary Model-based Framework for the 3D-AD task (MC4AD), which generates internal and external corrective forces for each point. We first propose a Diverse Anomaly-Generation (DA-Gen) module designed to simulate various types of anomalies. Next, we present the Corrective Force Prediction Network (CFP-Net), which uses complementary representations for point-level analysis to simulate the different contributions from internal and external corrective forces. To ensure the corrective forces are constrained effectively, we have developed a combined loss function that includes a new symmetric loss and an overall loss. Notably, we implement a Hierarchical Quality Control (HQC) strategy based on a three-way decision process and contribute a dataset titled Anomaly-IntraVariance, which incorporates intraclass variance to evaluate our model. As a result, the proposed MC4AD has been proven effective through theory and experimentation. The experimental results demonstrate that our approach yields nine state-of-the-art performances, achieving optimal results with minimal parameters and the fastest inference speed across five existing datasets, in addition to the proposed Anomaly-IntraVariance dataset. The source is available at https://github.com/hzzzzzhappy/MC4AD

  • 6 authors
·
May 9, 2025

An Infinite Family of Non-Rational VOAs from Strongly Coupled 4d Higgsless SCFTs

We study an infinite family of strongly coupled four-dimensional mathcal N=2 superconformal field theories (SCFTs) distinguished by a trivial Higgs branch, known as the (A_2,D_{3m+1}) Argyre-Douglas theories. We propose that their associated vertex operator algebras (VOAs) are the doublet algebras mathcal A(4m+2), an infinite family of non-rational vertex operator superalgebras with a remarkably simple strong generating set of only three fields. We provide several highly nontrivial checks of this proposal. In particular, we reproduce the four-dimensional conformal anomalies a and c from the VOA and analytically prove the exact equality between the Schur index of the SCFT and the supercharacter of the VOA. A key ingredient is a diagonal-gauging realization of the (A_2,D_{3m+1}) theories in terms of two simpler building blocks, which makes the Schur-index computation tractable. Remarkably, we find that the resulting Schur index of the (A_2,D_{3m+1}) theory coincides with that of mathcal N=4 SU(2) Super-Yang-Mills theory, up to an overall prefactor and an appropriate identification of fugacities. We also discuss a generalization to the two-parameter family (A_{2s},D_{(2s+1)m+1}), whose members likewise have trivial Higgs branches and admit diagonal-gauging realizations. A particularly interesting subfamily is (A_{2s},D_{2s+2}), for which the four-dimensional conformal anomalies coincide, a=c. Our results reveal a systematic connection between Higgsless SCFTs, diagonal gauging, and strongly finite but non-rational vertex operator algebras.

  • 1 authors
·
Sep 1

R3D-AD: Reconstruction via Diffusion for 3D Anomaly Detection

3D anomaly detection plays a crucial role in monitoring parts for localized inherent defects in precision manufacturing. Embedding-based and reconstruction-based approaches are among the most popular and successful methods. However, there are two major challenges to the practical application of the current approaches: 1) the embedded models suffer the prohibitive computational and storage due to the memory bank structure; 2) the reconstructive models based on the MAE mechanism fail to detect anomalies in the unmasked regions. In this paper, we propose R3D-AD, reconstructing anomalous point clouds by diffusion model for precise 3D anomaly detection. Our approach capitalizes on the data distribution conversion of the diffusion process to entirely obscure the input's anomalous geometry. It step-wisely learns a strict point-level displacement behavior, which methodically corrects the aberrant points. To increase the generalization of the model, we further present a novel 3D anomaly simulation strategy named Patch-Gen to generate realistic and diverse defect shapes, which narrows the domain gap between training and testing. Our R3D-AD ensures a uniform spatial transformation, which allows straightforwardly generating anomaly results by distance comparison. Extensive experiments show that our R3D-AD outperforms previous state-of-the-art methods, achieving 73.4% Image-level AUROC on the Real3D-AD dataset and 74.9% Image-level AUROC on the Anomaly-ShapeNet dataset with an exceptional efficiency.

  • 6 authors
·
Jul 15, 2024

Linear statistics for Coulomb gases: higher order cumulants

We consider N classical particles interacting via the Coulomb potential in spatial dimension d and in the presence of an external trap, at equilibrium at inverse temperature beta. In the large N limit, the particles are confined within a droplet of finite size. We study smooth linear statistics, i.e. the fluctuations of sums of the form {cal L}_N = sum_{i=1}^N f({bf x}_i), where {bf x}_i's are the positions of the particles and where f({bf x}_i) is a sufficiently regular function. There exists at present standard results for the first and second moments of {cal L}_N in the large N limit, as well as associated Central Limit Theorems in general dimension and for a wide class of confining potentials. Here we obtain explicit expressions for the higher order cumulants of {cal L}_N at large N, when the function f({bf x})=f(|{bf x}|) and the confining potential are both rotationnally invariant. A remarkable feature of our results is that these higher cumulants depend only on the value of f'(|{bf x}|) and its higher order derivatives evaluated exactly at the boundary of the droplet, which in this case is a d-dimensional sphere. In the particular two-dimensional case d=2 at the special value beta=2, a connection to the Ginibre ensemble allows us to derive these results in an alternative way using the tools of determinantal point processes. Finally we also obtain the large deviation form of the full probability distribution function of {cal L}_N.

  • 4 authors
·
Oct 25, 2023

Value-order Decomposition for Generalist Anomaly Detection

Industrial anomaly detection suffers from limited data, making cross-domain generalization particularly challenging. Generalist Anomaly Detection (GAD) aims to train a unified model on a source domain that can effectively detect anomalies in unseen target domains. In the initial semantic feature space, strong entanglement between anomalies and object categories or defect types hinders effective generalization across domains. Recent works address this issue by projecting features into a residual space; however, such methods primarily increase cross-domain overlap for normal features, while anomalous features remain specific to object categories, defect types and data domains, leading to poor alignment and generalization. To address this limitation, we propose Value-order Decomposition (VOD), a simple yet effective technique that bridges three types of generalization gaps across object categories, defect types (including real and synthetic defects), and data domains. VOD disentangles and suppresses object-category-, defect-type-, and domain-specific information, promoting alignment within normal and abnormal samples while preserving their separability, thereby enabling robust generalization across the three gaps. Leveraging the strong alignment between real and synthetic defects within the same object, we perform anomaly detection using only normal and synthetic-abnormal reference, and effectively generalize to unseen real defect types. Experiments on diverse industrial and medical benchmarks demonstrate that our method, using a simple cut-and-paste anomaly simulation strategy, achieves strong generalization across the three gaps.

  • 4 authors
·
Jun 11

THEMIS: Unlocking Pretrained Knowledge with Foundation Model Embeddings for Anomaly Detection in Time Series

Time series anomaly detection forms a very crucial area in several domains but poses substantial challenges. Due to time series data possessing seasonality, trends, noise, and evolving patterns (concept drift), it becomes very difficult to set a general notion of what constitutes normal behavior. Anomalies themselves could be varied, ranging from a single outlier to contextual or collective anomalies, and are normally very rare; hence, the dataset is largely imbalanced. Additional layers of complexities arise due to the problems of increased dimensionality of modern time series, real-time detection criteria, setting up appropriate detection thresholds, and arriving at results that are interpretable. To embrace these multifaceted challenges, very strong, flexible, and interpretable approaches are required. This paper presents THEMIS, a new framework for time series anomaly detection that exploits pretrained knowledge from foundation models. THEMIS extracts embeddings from the encoder of the Chronos time series foundation model and applies outlier detection techniques like Local Outlier Factor and Spectral Decomposition on the self-similarity matrix, to spot anomalies in the data. Our experiments show that this modular method achieves SOTA results on the MSL dataset and performs quite competitively on the SMAP and SWAT^* datasets. Notably, THEMIS exceeds models trained specifically for anomaly detection, presenting hyperparameter robustness and interpretability by default. This paper advocates for pretrained representations from foundation models for performing efficient and adaptable anomaly detection for time series data.

  • 4 authors
·
Oct 4, 2025

Open-Set Supervised 3D Anomaly Detection: An Industrial Dataset and a Generalisable Framework for Unknown Defects

Although self-supervised 3D anomaly detection assumes that acquiring high-precision point clouds is computationally expensive, in real manufacturing scenarios it is often feasible to collect a limited number of anomalous samples. Therefore, we study open-set supervised 3D anomaly detection, where the model is trained with only normal samples and a small number of known anomalous samples, aiming to identify unknown anomalies at test time. We present Open-Industry, a high-quality industrial dataset containing 15 categories, each with five real anomaly types collected from production lines. We first adapt general open-set anomaly detection methods to accommodate 3D point cloud inputs better. Building upon this, we propose Open3D-AD, a point-cloud-oriented approach that leverages normal samples, simulated anomalies, and partially observed real anomalies to model the probability density distributions of normal and anomalous data. Then, we introduce a simple Correspondence Distributions Subsampling to reduce the overlap between normal and non-normal distributions, enabling stronger dual distributions modeling. Based on these contributions, we establish a comprehensive benchmark and evaluate the proposed method extensively on Open-Industry as well as established datasets including Real3D-AD and Anomaly-ShapeNet. Benchmark results and ablation studies demonstrate the effectiveness of Open3D-AD and further reveal the potential of open-set supervised 3D anomaly detection.

  • 10 authors
·
Mar 31

Few-Shot Anomaly-Driven Generation for Anomaly Classification and Segmentation

Anomaly detection is a practical and challenging task due to the scarcity of anomaly samples in industrial inspection. Some existing anomaly detection methods address this issue by synthesizing anomalies with noise or external data. However, there is always a large semantic gap between synthetic and real-world anomalies, resulting in weak performance in anomaly detection. To solve the problem, we propose a few-shot Anomaly-driven Generation (AnoGen) method, which guides the diffusion model to generate realistic and diverse anomalies with only a few real anomalies, thereby benefiting training anomaly detection models. Specifically, our work is divided into three stages. In the first stage, we learn the anomaly distribution based on a few given real anomalies and inject the learned knowledge into an embedding. In the second stage, we use the embedding and given bounding boxes to guide the diffusion model to generate realistic and diverse anomalies on specific objects (or textures). In the final stage, we propose a weakly-supervised anomaly detection method to train a more powerful model with generated anomalies. Our method builds upon DRAEM and DesTSeg as the foundation model and conducts experiments on the commonly used industrial anomaly detection dataset, MVTec. The experiments demonstrate that our generated anomalies effectively improve the model performance of both anomaly classification and segmentation tasks simultaneously, \eg, DRAEM and DseTSeg achieved a 5.8\% and 1.5\% improvement in AU-PR metric on segmentation task, respectively. The code and generated anomalous data are available at https://github.com/gaobb/AnoGen.

  • 5 authors
·
May 14, 2025 2

StRegA: Unsupervised Anomaly Detection in Brain MRIs using a Compact Context-encoding Variational Autoencoder

Expert interpretation of anatomical images of the human brain is the central part of neuro-radiology. Several machine learning-based techniques have been proposed to assist in the analysis process. However, the ML models typically need to be trained to perform a specific task, e.g., brain tumour segmentation or classification. Not only do the corresponding training data require laborious manual annotations, but a wide variety of abnormalities can be present in a human brain MRI - even more than one simultaneously, which renders representation of all possible anomalies very challenging. Hence, a possible solution is an unsupervised anomaly detection (UAD) system that can learn a data distribution from an unlabelled dataset of healthy subjects and then be applied to detect out of distribution samples. Such a technique can then be used to detect anomalies - lesions or abnormalities, for example, brain tumours, without explicitly training the model for that specific pathology. Several Variational Autoencoder (VAE) based techniques have been proposed in the past for this task. Even though they perform very well on controlled artificially simulated anomalies, many of them perform poorly while detecting anomalies in clinical data. This research proposes a compact version of the "context-encoding" VAE (ceVAE) model, combined with pre and post-processing steps, creating a UAD pipeline (StRegA), which is more robust on clinical data, and shows its applicability in detecting anomalies such as tumours in brain MRIs. The proposed pipeline achieved a Dice score of 0.642pm0.101 while detecting tumours in T2w images of the BraTS dataset and 0.859pm0.112 while detecting artificially induced anomalies, while the best performing baseline achieved 0.522pm0.135 and 0.783pm0.111, respectively.

  • 10 authors
·
Jan 31, 2022

Structured Temporal Causality for Interpretable Multivariate Time Series Anomaly Detection

Real-world multivariate time series anomalies are rare and often unlabeled. Additionally, prevailing methods rely on increasingly complex architectures tuned to benchmarks, detecting only fragments of anomalous segments and overstating performance. In this paper, we introduce OracleAD, a simple and interpretable unsupervised framework for multivariate time series anomaly detection. OracleAD encodes each variable's past sequence into a single causal embedding to jointly predict the present time point and reconstruct the input window, effectively modeling temporal dynamics. These embeddings then undergo a self-attention mechanism to project them into a shared latent space and capture spatial relationships. These relationships are not static, since they are modeled by a property that emerges from each variable's temporal dynamics. The projected embeddings are aligned to a Stable Latent Structure (SLS) representing normal-state relationships. Anomalies are identified using a dual scoring mechanism based on prediction error and deviation from the SLS, enabling fine-grained anomaly diagnosis at each time point and across individual variables. Since any noticeable SLS deviation originates from embeddings that violate the learned temporal causality of normal data, OracleAD directly pinpoints the root-cause variables at the embedding level. OracleAD achieves state-of-the-art results across multiple real-world datasets and evaluation protocols, while remaining interpretable through SLS.

  • 6 authors
·
Oct 18, 2025

AnomalyNCD: Towards Novel Anomaly Class Discovery in Industrial Scenarios

Recently, multi-class anomaly classification has garnered increasing attention. Previous methods directly cluster anomalies but often struggle due to the lack of anomaly-prior knowledge. Acquiring this knowledge faces two issues: the non-prominent and weak-semantics anomalies. In this paper, we propose AnomalyNCD, a multi-class anomaly classification network compatible with different anomaly detection methods. To address the non-prominence of anomalies, we design main element binarization (MEBin) to obtain anomaly-centered images, ensuring anomalies are learned while avoiding the impact of incorrect detections. Next, to learn anomalies with weak semantics, we design mask-guided representation learning, which focuses on isolated anomalies guided by masks and reduces confusion from erroneous inputs through corrected pseudo labels. Finally, to enable flexible classification at both region and image levels, we develop a region merging strategy that determines the overall image category based on the classified anomaly regions. Our method outperforms the state-of-the-art works on the MVTec AD and MTD datasets. Compared with the current methods, AnomalyNCD combined with zero-shot anomaly detection method achieves a 10.8% F_1 gain, 8.8% NMI gain, and 9.5% ARI gain on MVTec AD, and 12.8% F_1 gain, 5.7% NMI gain, and 10.8% ARI gain on MTD. Code is available at https://github.com/HUST-SLOW/AnomalyNCD.

  • 6 authors
·
Oct 18, 2024

EFT Validity and Truncation Uncertainty from few Nuisance Parameters

An observable in an Effective Field Theory (EFT) is an expansion in a set of small parameters, no different than any other perturbation series. Truncating such a series expansion leaves the leading dropped term as the dominant source of error, and that term itself contains a calculable portion. We explore the partial calculation of this next-order error, available at dim-6^2 in SMEFT with no additional tools needed to simulate it, and explore how to efficiently use that partial calculation to model the next-order uncertainty in full using a minimal number of nuisance parameters. This estimate of the uncertainty of the EFT signal rate naturally imposes EFT validity by ensuring that bounds are driven by kinematic regions where truncation uncertainties are parametrically smaller than the signal. We incorporate the calculable dim-6^2 piece into the signal and cover the remaining higher-dimension uncertainty with a small set of nuisance parameters derived from a scan over Wilson-coefficient values. Our algorithm to determine the relevant nuisance parameters and distributions is automation-friendly and applies to arbitrary truncation choices. We then provide multiple examples of its implementation in high-energy collider processes focused on SMEFT truncated at O(Λ^{-2}), where the dim-6^2 piece is used to estimate the full mathcal O(Λ^{-4}) dependence. In the examples considered here the reduction of nuisance parameters is appreciable, generically reducing the nuisance parameter count by an order of magnitude compared to naïve estimates.

  • 3 authors
·
Jul 1

Contributions to Robust and Efficient Methods for Analysis of High Dimensional Data

A ubiquitous feature of data of our era is their extra-large sizes and dimensions. Analyzing such high-dimensional data poses significant challenges, since the feature dimension is often much larger than the sample size. This thesis introduces robust and computationally efficient methods to address several common challenges associated with high-dimensional data. In my first manuscript, I propose a coherent approach to variable screening that accommodates nonlinear associations. I develop a novel variable screening method that transcends traditional linear assumptions by leveraging mutual information, with an intended application in neuroimaging data. This approach allows for accurate identification of important variables by capturing nonlinear as well as linear relationships between the outcome and covariates. Building on this foundation, I develop new optimization methods for sparse estimation using nonconvex penalties in my second manuscript. These methods address notable challenges in current statistical computing practices, facilitating computationally efficient and robust analyses of complex datasets. The proposed method can be applied to a general class of optimization problems. In my third manuscript, I contribute to robust modeling of high-dimensional correlated observations by developing a mixed-effects model based on Tsallis power-law entropy maximization and discussed the theoretical properties of such distribution. This model surpasses the constraints of conventional Gaussian models by accommodating a broader class of distributions with enhanced robustness to outliers. Additionally, I develop a proximal nonlinear conjugate gradient algorithm that accelerates convergence while maintaining numerical stability, along with rigorous statistical properties for the proposed framework.

  • 1 authors
·
Sep 9, 2025

Unsupervised Anomaly Detection in Medical Images with a Memory-augmented Multi-level Cross-attentional Masked Autoencoder

Unsupervised anomaly detection (UAD) aims to find anomalous images by optimising a detector using a training set that contains only normal images. UAD approaches can be based on reconstruction methods, self-supervised approaches, and Imagenet pre-trained models. Reconstruction methods, which detect anomalies from image reconstruction errors, are advantageous because they do not rely on the design of problem-specific pretext tasks needed by self-supervised approaches, and on the unreliable translation of models pre-trained from non-medical datasets. However, reconstruction methods may fail because they can have low reconstruction errors even for anomalous images. In this paper, we introduce a new reconstruction-based UAD approach that addresses this low-reconstruction error issue for anomalous images. Our UAD approach, the memory-augmented multi-level cross-attentional masked autoencoder (MemMC-MAE), is a transformer-based approach, consisting of a novel memory-augmented self-attention operator for the encoder and a new multi-level cross-attention operator for the decoder. MemMCMAE masks large parts of the input image during its reconstruction, reducing the risk that it will produce low reconstruction errors because anomalies are likely to be masked and cannot be reconstructed. However, when the anomaly is not masked, then the normal patterns stored in the encoder's memory combined with the decoder's multi-level cross attention will constrain the accurate reconstruction of the anomaly. We show that our method achieves SOTA anomaly detection and localisation on colonoscopy, pneumonia, and covid-19 chest x-ray datasets.

  • 10 authors
·
Mar 22, 2022

Large Landscape of 4d Superconformal Field Theories from Small Gauge Theories

We systematically explore the space of renormalization group flows of four-dimensional N=1 superconformal field theories (SCFTs) triggered by relevant deformations, as well as by coupling to free chiral multiplets with relevant operators. In this way, we classify all possible fixed point SCFTs that can be obtained from certain rank 1 and 2 supersymmetric gauge theories with small amount of matter multiplets, identifying 7,346 inequivalent fixed points which pass a series of non-trivial consistency checks. This set of fixed points exhibits interesting statistical behaviors, including a narrow distribution of central charges (a, c), a correlation between the number of relevant operators and the ratio a/c, and trends in the lightest operator dimension versus a/c. The ratio a/c of this set is distributed between 0.7228 and 1.2100, where the upper bound is larger than that of previously known interacting SCFTs. Moreover, we find a plethora of highly non-perturbative phenomena, such as (super)symmetry enhancements, operator decoupling, non-commuting renormalization group flows, and dualities. We especially identify amongst these fixed points a new SCFT that has smaller central charges (a, c) = (633{2000},683{2000}) than that of the deformed minimal Argyres-Douglas theory, as well as novel Lagrangian duals for certain N=1 deformed Argyres-Douglas theories. We provide a website https://qft.kaist.ac.kr/landscape to navigate through our set of fixed points.

  • 4 authors
·
Aug 21, 2024

Extremal black hole mimickers: geometry, stability, and long-delay signal trains

We present a spacetime that serves as a horizonless mimicker of extremal black holes. Unlike previously studied mimickers of black holes with non-degenerate horizons, whose geometries are of the wormhole type and consist of two asymptotically flat regions connected by a very long throat, the mimicker of an extremal black hole possesses a single asymptotically flat region at one end and an infinitely long throat at the other. In the throat region, the spacetime approaches the direct-product geometry M_{1,1} times S^2, where M_{1,1} is two-dimensional Minkowski spacetime and S^2 is the two-sphere. We investigate scalar-field dynamics and the fate of the Aretakis instability. Although Aretakis-like modes arise in a local analysis of the throat, they do not lead to a physical instability of the mimicker. A scalar perturbation initially localized in the throat gives rise, at late times, to a sequence of signals with a characteristic separation t_{rm delay}sim 1/λ, where λll 1 is a deformation parameter. This timescale is parametrically larger than the echo time t_{rm echo}sim ln(1/λ) characteristic of non-extremal black-hole mimickers. We refer to this sequence as a {\it long-delay signal train}. Geometrically, the periodicity of the long-delay signals is associated with periodic geodesics on S^2. We then extend the construction to extremal Kerr. In this case, the throat region approaches a generalized product geometry involving M_{1,1} and a two-dimensional surface Σ_2. The corresponding signals are expected to form a quasi-periodic signal train, reflecting the quasi-periodic geodesic motion on Σ_2. We also comment on the generalization to wormhole mimickers of non-extremal black holes and on the implications of these results for unitarity in the context of the AdS/CFT correspondence.

  • 1 authors
·
Oct 7

Language-guided Open-world Video Anomaly Detection

Video anomaly detection models aim to detect anomalies that deviate from what is expected. In open-world scenarios, the expected events may change as requirements change. For example, not wearing a mask is considered abnormal during a flu outbreak but normal otherwise. However, existing methods assume that the definition of anomalies is invariable, and thus are not applicable to the open world. To address this, we propose a novel open-world VAD paradigm with variable definitions, allowing guided detection through user-provided natural language at inference time. This paradigm necessitates establishing a robust mapping from video and textual definition to anomaly score. Therefore, we propose LaGoVAD (Language-guided Open-world VAD), a model that dynamically adapts anomaly definitions through two regularization strategies: diversifying the relative durations of anomalies via dynamic video synthesis, and enhancing feature robustness through contrastive learning with negative mining. Training such adaptable models requires diverse anomaly definitions, but existing datasets typically provide given labels without semantic descriptions. To bridge this gap, we collect PreVAD (Pre-training Video Anomaly Dataset), the largest and most diverse video anomaly dataset to date, featuring 35,279 annotated videos with multi-level category labels and descriptions that explicitly define anomalies. Zero-shot experiments on seven datasets demonstrate SOTA performance. Data and code will be released.

  • 5 authors
·
Mar 17, 2025

The Love for Three Logarithms: Universal Running of Dynamical Love Numbers

The static tidal Love numbers of black holes vanish in general relativity (GR), but are generically non-zero, and in fact 'run' logarithmically with scale, in more general theories or beyond the static limit. We expose a model-agnostic framework for the running of Love numbers at the dynamical level, valid for any tidal perturbation on any static, spherically symmetric, asymptotically flat background, based on the near-zone expansion in powers of the frequency ω and on the monodromy at spatial infinity. A master recurrence formula determines the monodromy generator to all orders in ω^2, whose three independent entries fully encode the running of the Love numbers. This structure explains the quadratic nature of the renormalization group equation, here proved to all orders and for any type of Love number. We discuss the scheme dependence of the logarithmic coefficients, which is made transparent by the monodromy form. In particular, this clarifies that the anomalous exponents of the tidal field, the so-called 'renormalized angular momentum' of the Mano-Suzuki-Takasugi formalism, are scheme-invariant and directly computable on any spacetime, without need of explicit solutions. We discuss several applications to black holes, including the derivation of a closed-form formula for the leading dynamical running of axial Love numbers of Reissner-Nordström black holes, proving in particular that it vanishes in the extremal limit. For generic black holes beyond GR, we prove that dynamical running probes deformations of the metric at lower multipoles than the static one, and we illustrate the power of the method by deriving some exact results for the Hayward and Bardeen regular black holes.

  • 1 authors
·
Sep 30

Incomplete RG: Hawking-Page transition, C-theorem and relevant scalar deformations of global AdS

We discuss relevant scalar deformations of a holographic theory with a compact boundary. An example of such a theory would be the global AdS_4 with its spatially compact boundary S^2. To introduce a relevant deformation, we choose to turn on a time-independent and spatially homogeneous non-normalizable scalar operator with m^2 = -2. The finite size of a compact boundary cuts down the RG flow at a finite length scale leading to an incomplete RG flow to IR. We discuss a version of {\it incomplete} C-theorem and an {\it incomplete} attractor like mechanism. We discuss the implication of our results for entanglement entropy and geometric quantities like scalar curvature, volume and mass scale of fundamental excitation of the how these quantities increase or decrease (often monotonically) with the strength of the deformation. Thermal physics of a holographic theory defined on a compact boundary is more interesting than its non-compact counterpart. It is well known that with a compact boundary, there is a possibility of a first order Hawking-Page transition dual to a de-confinement phase transition. From a gravity perspective, a relevant deformation dumps negative energy inside the bulk, increasing the effective cosmological constant (Lambda) of the AdS. Dumping more negative energy in the bulk would make the HP transition harder and the corresponding HP transition temperature would increase. However, we have found the size of the BH at the transition temperature decreases.

  • 3 authors
·
Dec 14, 2021

AnomalyDiffusion: Few-Shot Anomaly Image Generation with Diffusion Model

Anomaly inspection plays an important role in industrial manufacture. Existing anomaly inspection methods are limited in their performance due to insufficient anomaly data. Although anomaly generation methods have been proposed to augment the anomaly data, they either suffer from poor generation authenticity or inaccurate alignment between the generated anomalies and masks. To address the above problems, we propose AnomalyDiffusion, a novel diffusion-based few-shot anomaly generation model, which utilizes the strong prior information of latent diffusion model learned from large-scale dataset to enhance the generation authenticity under few-shot training data. Firstly, we propose Spatial Anomaly Embedding, which consists of a learnable anomaly embedding and a spatial embedding encoded from an anomaly mask, disentangling the anomaly information into anomaly appearance and location information. Moreover, to improve the alignment between the generated anomalies and the anomaly masks, we introduce a novel Adaptive Attention Re-weighting Mechanism. Based on the disparities between the generated anomaly image and normal sample, it dynamically guides the model to focus more on the areas with less noticeable generated anomalies, enabling generation of accurately-matched anomalous image-mask pairs. Extensive experiments demonstrate that our model significantly outperforms the state-of-the-art methods in generation authenticity and diversity, and effectively improves the performance of downstream anomaly inspection tasks. The code and data are available in https://github.com/sjtuplayer/anomalydiffusion.

  • 8 authors
·
Feb 21, 2024

Memorizing Normality to Detect Anomaly: Memory-augmented Deep Autoencoder for Unsupervised Anomaly Detection

Deep autoencoder has been extensively used for anomaly detection. Training on the normal data, the autoencoder is expected to produce higher reconstruction error for the abnormal inputs than the normal ones, which is adopted as a criterion for identifying anomalies. However, this assumption does not always hold in practice. It has been observed that sometimes the autoencoder "generalizes" so well that it can also reconstruct anomalies well, leading to the miss detection of anomalies. To mitigate this drawback for autoencoder based anomaly detector, we propose to augment the autoencoder with a memory module and develop an improved autoencoder called memory-augmented autoencoder, i.e. MemAE. Given an input, MemAE firstly obtains the encoding from the encoder and then uses it as a query to retrieve the most relevant memory items for reconstruction. At the training stage, the memory contents are updated and are encouraged to represent the prototypical elements of the normal data. At the test stage, the learned memory will be fixed, and the reconstruction is obtained from a few selected memory records of the normal data. The reconstruction will thus tend to be close to a normal sample. Thus the reconstructed errors on anomalies will be strengthened for anomaly detection. MemAE is free of assumptions on the data type and thus general to be applied to different tasks. Experiments on various datasets prove the excellent generalization and high effectiveness of the proposed MemAE.

  • 7 authors
·
Aug 5, 2019

The ETH matrix model for DSSYK: non-perturbative corrections and intersection theory

At leading order in the genus expansion the ETH matrix model for DSSYK reproduces its correlators by construction, while its higher-genus corrections are conjectured to capture higher-topology contributions in the dual sine-dilaton gravity -- a correspondence established so far only for the disk and the wormhole. At fixed genus the correlators are built from discrete volumes N_{g,n}, polynomial in q-deformed zeta values ζ_q(2k) with q=e^{-λ}, λ being the DSSYK coupling. These lie in the ring of quasimodular forms generated by the Eisenstein series E_2,E_4,E_6, whose S-duality yields an exact closed form for the leading non-perturbative correction as λto0, controlled by widetilde q=e^{-4π^2/λ}. Known at disk level, this scale is shown here to govern the fixed-genus, higher-boundary amplitudes as well. We show that the term linear in widetilde q, at leading order in λ, is captured entirely by the q-deformed Weil--Petersson volumes, and reduces to a finite sum of intersection numbers of κ-classes on the moduli space mathcal M_{g,n} of stable curves, computable without repeating the topological recursion that produced the N_{g,n}. We tabulate it for every (g,n) whose q-deformed volume is known in closed form, and extend it to (3,1),(3,2),(4,1), where none is available. The construction is not restricted to leading order: we work out O(widetilde q^2) for the same cases.

  • 2 authors
·
Aug 23

Modeling the Distribution of Normal Data in Pre-Trained Deep Features for Anomaly Detection

Anomaly Detection (AD) in images is a fundamental computer vision problem and refers to identifying images and image substructures that deviate significantly from the norm. Popular AD algorithms commonly try to learn a model of normality from scratch using task specific datasets, but are limited to semi-supervised approaches employing mostly normal data due to the inaccessibility of anomalies on a large scale combined with the ambiguous nature of anomaly appearance. We follow an alternative approach and demonstrate that deep feature representations learned by discriminative models on large natural image datasets are well suited to describe normality and detect even subtle anomalies in a transfer learning setting. Our model of normality is established by fitting a multivariate Gaussian (MVG) to deep feature representations of classification networks trained on ImageNet using normal data only. By subsequently applying the Mahalanobis distance as the anomaly score we outperform the current state of the art on the public MVTec AD dataset, achieving an AUROC value of 95.8 pm 1.2 (mean pm SEM) over all 15 classes. We further investigate why the learned representations are discriminative to the AD task using Principal Component Analysis. We find that the principal components containing little variance in normal data are the ones crucial for discriminating between normal and anomalous instances. This gives a possible explanation to the often sub-par performance of AD approaches trained from scratch using normal data only. By selectively fitting a MVG to these most relevant components only, we are able to further reduce model complexity while retaining AD performance. We also investigate setting the working point by selecting acceptable False Positive Rate thresholds based on the MVG assumption. Code available at https://github.com/ORippler/gaussian-ad-mvtec

  • 3 authors
·
May 28, 2020

Non-Gaussianity in D3-brane inflation

We update predictions for observables in the "delicate" D3/anti-D3 inflationary model on the conifold. We use a full CMB likelihood calculation to assess goodness-of-fit, which is necessary because in this model the zeta power spectrum often cannot be modelled as a power-law over observable scales. For the first time we are able to provide accurate forecasts for the amplitude of three-point correlations. In a significant portion of its parameter space the model follows Maldacena's single-field prediction fNL ~ -(5/12)(ns-1) if nt << 1. Therefore |fNL| is usually small when the power spectrum satisfies observational constraints. In a small number of cases the bispectrum is instead dominated by effects from rapid switching between angular minima. The resulting amplitudes are larger, but mostly with unacceptable spectral behaviour. In the most extreme case we obtain |fNLeq| ~ 75 at kt/3 = 0.002/Mpc. It has been suggested that the quasi-single field inflation ("QSFI") mechanism could produce significant 3-point correlations in this model. We do observe rare shifts in amplitude between equilateral and squeezed configurations that could possibly be associated with QSFI effects, but more investigation is needed to establish the full bispectrum shape. There is evidence of "shape" running between equilateral and squeezed configurations that may be inherited from the scale dependence of the spectrum. We explore the dependence of observables on discrete choices such as the truncation point of the potential. Our analysis illustrates the advantages of a standard format for information exchange within the inflationary model-building and testing community.

  • 3 authors
·
Feb 9, 2022

Anomalies in Multivariate Time Series Benchmarks Are Mostly Univariate

Many recent multivariate time series anomaly detection (MTSAD) models incorporate cross-channel modeling, under the implicit assumption that the structure of anomalies may be spread across multiple channels. We evaluate this assumption on eight widely used public benchmarks by introducing a per-segment diagnostic framework that flags, for each labeled anomaly, whether at least one channel deviates individually from its normal history, whether the cross-channel correlation structure changes, or both. The framework shows that no cross-channel rupture occurs without an accompanying univariate deviation across a range of reasonable thresholds. A complementary metric also reveals that on six of the eight benchmarks, at least half of the labeled anomaly segments deviate univariately on 89% to 100% of their timesteps, reaching 100% on three of these datasets. To verify that our framework captures cross-channel structure when present, we construct synthetic data of phase-shifted sinusoidal channels with shared noise. Each anomalous segment is altered through one of two channel-wise corruptions that preserve the per-channel marginal distribution while breaking cross-channel structure, and our framework correctly characterizes these segments as cross-channel-only. On these data, channel-dependent (CD) models successfully exploit the cross-channel signal whereas channel-independent (CI) ones fail. The CI/CD comparison of a recent SOTA detector on real benchmarks further confirms that CD modeling brings no measurable gain. We conclude that current MTSAD benchmarks are unsuitable for validating cross-channel modeling capabilities, and we call for the development of more structurally diverse evaluation sets. The code for this study is publicly available.

  • 4 authors
·
Jun 2 1