Daily Papers

Looped Transformers increase test-time computation by repeatedly applying a shared recurrent block. Learned halting objectives in looped Transformers typically use a single exit distribution both as the inference-time stopping rule and as the training-time weighting of per-depth losses. This entangles exit selection with trajectory formation: the gate not only chooses which recurrent state to use, but also determines how strongly each intermediate state is supervised. Consequently, poor adaptive-compute performance can arise from the readout, the induced trajectory, or their interaction. We study adaptive depth in looped Transformers through this trajectory--readout lens, across controlled synthetic tasks (modular arithmetic and binary parity) and large-scale Ouro-1.4B and 2.6B checkpoints. We find that fixed-prior depth supervision, which shapes the trajectory without an input-dependent halting policy, produces difficulty-aware trajectories whose intermediate states expose useful stopping signals, and that simple post-hoc confidence readouts often match or outperform learned linear and MLP gates. Fitting gates on frozen trajectories localizes the failure: it appears to stem mainly from the trajectory induced by joint gate training rather than from limited gate expressivity. The same pattern is present in Ouro evaluations, where pretrained ponder gates are competitive but not uniformly Pareto-optimal, and measured latency confirms that the resulting reductions in average exit depth translate into practical inference-time savings. Our systematic diagnostic evaluation reframes adaptive depth in looped Transformers as a joint problem of trajectory formation and exit readout, rather than gate learning alone, highlighting a distinction that prior learned-halting work has often left implicit.

This paper introduces Adaptive Computation Time (ACT), an algorithm that allows recurrent neural networks to learn how many computational steps to take between receiving an input and emitting an output. ACT requires minimal changes to the network architecture, is deterministic and differentiable, and does not add any noise to the parameter gradients. Experimental results are provided for four synthetic problems: determining the parity of binary vectors, applying binary logic operations, adding integers, and sorting real numbers. Overall, performance is dramatically improved by the use of ACT, which successfully adapts the number of computational steps to the requirements of the problem. We also present character-level language modelling results on the Hutter prize Wikipedia dataset. In this case ACT does not yield large gains in performance; however it does provide intriguing insight into the structure of the data, with more computation allocated to harder-to-predict transitions, such as spaces between words and ends of sentences. This suggests that ACT or other adaptive computation methods could provide a generic method for inferring segment boundaries in sequence data.

We consider a binary classification problem under group fairness constraints, which can be one of Demographic Parity (DP), Equalized Opportunity (EOp), or Equalized Odds (EO). We propose an explicit characterization of Bayes optimal classifier under the fairness constraints, which turns out to be a simple modification rule of the unconstrained classifier. Namely, we introduce a novel instance-level measure of bias, which we call bias score, and the modification rule is a simple linear rule on top of the finite amount of bias scores.Based on this characterization, we develop a post-hoc approach that allows us to adapt to fairness constraints while maintaining high accuracy. In the case of DP and EOp constraints, the modification rule is thresholding a single bias score, while in the case of EO constraints we are required to fit a linear modification rule with 2 parameters. The method can also be applied for composite group-fairness criteria, such as ones involving several sensitive attributes.

Recently, Hastings & Haah introduced a quantum memory defined on the honeycomb lattice. Remarkably, this honeycomb code assembles weight-six parity checks using only two-local measurements. The sparse connectivity and two-local measurements are desirable features for certain hardware, while the weight-six parity checks enable robust performance in the circuit model. In this work, we quantify the robustness of logical qubits preserved by the honeycomb code using a correlated minimum-weight perfect-matching decoder. Using Monte Carlo sampling, we estimate the honeycomb code's threshold in different error models, and project how efficiently it can reach the "teraquop regime" where trillions of quantum logical operations can be executed reliably. We perform the same estimates for the rotated surface code, and find a threshold of 0.2%-0.3% for the honeycomb code compared to a threshold of 0.5%-0.7% for the surface code in a controlled-not circuit model. In a circuit model with native two-body measurements, the honeycomb code achieves a threshold of 1.5% < p <2.0%, where p is the collective error rate of the two-body measurement gate - including both measurement and correlated data depolarization error processes. With such gates at a physical error rate of 10^{-3}, we project that the honeycomb code can reach the teraquop regime with only 600 physical qubits.

We show that pairs of widely separated interferometers are advantageous for measuring the Stokes parameter V of a stochastic background of gravitational waves. This parameter characterizes asymmetry of amplitudes of right- and left-handed waves and generation of the asymmetry is closely related to parity violation in the early universe. The advantageous pairs include LIGO(Livingston)-LCGT and AIGO-Virgo that are relatively insensitive to Omega_GW (the simple intensity of the background). Using at least three detectors, information of the intensity Omega_GW and the degree of asymmetry V can be separately measured.

Although transformers are remarkably effective for many tasks, there are some surprisingly easy-looking regular languages that they struggle with. Hahn shows that for languages where acceptance depends on a single input symbol, a transformer's classification decisions become less and less confident (that is, with cross-entropy approaching 1 bit per string) as input strings get longer and longer. We examine this limitation using two languages: PARITY, the language of bit strings with an odd number of 1s, and FIRST, the language of bit strings starting with a 1. We demonstrate three ways of overcoming the limitation suggested by Hahn's lemma. First, we settle an open question by constructing a transformer that recognizes PARITY with perfect accuracy, and similarly for FIRST. Second, we use layer normalization to bring the cross-entropy of both models arbitrarily close to zero. Third, when transformers need to focus on a single position, as for FIRST, we find that they can fail to generalize to longer strings; we offer a simple remedy to this problem that also improves length generalization in machine translation.

Transformers, with their attention mechanisms, have emerged as the state-of-the-art architectures of sequential modeling and empirically outperform feed-forward neural networks (FFNNs) across many fields, such as natural language processing and computer vision. However, their generalization ability, particularly for low-sensitivity functions, remains less studied. We bridge this gap by analyzing transformers on the k-parity problem. Daniely and Malach (NeurIPS 2020) show that FFNNs with one hidden layer and O(nk^7 log k) parameters can learn k-parity, where the input length n is typically much larger than k. In this paper, we prove that FFNNs require at least Omega(n) parameters to learn k-parity, while transformers require only O(k) parameters, surpassing the theoretical lower bound needed by FFNNs. We further prove that this parameter efficiency cannot be achieved with fixed attention heads. Our work establishes transformers as theoretically superior to FFNNs in learning parity function, showing how their attention mechanisms enable parameter-efficient generalization in functions with low sensitivity.

An amplitude analysis of B^-rightarrow D^- D^0 K_S^0 decays is performed using proton-proton collision data, corresponding to an integrated luminosity of 9,fb^{-1}, collected with the LHCb detector at center-of-mass energies of 7, 8, and 13,Tekern -0.1em V. A resonant structure of spin-parity 0^+ is observed in the D^0 K_S^0 invariant-mass spectrum with a significance of 5.3,sigma. The mass and width of the state, modeled with a Breit-Wigner lineshape, are determined to be 2883pm11pm6,Mekern -0.1em V!/c^2 and 87_{-47}^{+22}pm6,Mekern -0.1em V respectively, where the first uncertainties are statistical and the second systematic. These properties and the quark content are consistent with those of the open-charm tetraquark state T_{cs 0}^{*}(2870)^0 observed previously in the D^+ K^- final state of the B^-rightarrow D^- D^+ K^- decay. This result confirms the existence of the T_{cs 0}^{*}(2870)^0 state in a new decay mode. The T_{cs1}^{*}(2900)^0 state, reported in the B^-rightarrow D^- D^+ K^- decay, is also searched for in the D^0 K_S^0 invariant-mass spectrum of the B^- rightarrow D^- D^0 K_S^0 decay, without finding evidence for it.

Tokenization is the first -- and often least scrutinized -- step of most NLP pipelines. Standard algorithms for learning tokenizers rely on frequency-based objectives, which favor languages dominant in the training data and consequently leave lower-resource languages with tokenizations that are disproportionately longer, morphologically implausible, or even riddled with <UNK> placeholders. This phenomenon ultimately amplifies computational and financial inequalities between users from different language backgrounds. To remedy this, we introduce Parity-aware Byte Pair Encoding (BPE), a variant of the widely-used BPE algorithm. At every merge step, Parity-aware BPE maximizes the compression gain of the currently worst-compressed language, trading a small amount of global compression for cross-lingual parity. We find empirically that Parity-aware BPE leads to more equitable token counts across languages, with negligible impact on global compression rate and no substantial effect on language-model performance in downstream tasks.

The optimal bit-width for achieving the best trade-off between quantized model size and accuracy has been a subject of ongoing debate. While some advocate for 4-bit quantization, others propose that 1.58-bit offers superior results. However, the lack of a cohesive framework for different bits has left such conclusions relatively tenuous. We present ParetoQ, the first unified framework that facilitates rigorous comparisons across 1-bit, 1.58-bit, 2-bit, 3-bit, and 4-bit quantization settings. Our findings reveal a notable learning transition between 2 and 3 bits: For 3-bits and above, the fine-tuned models stay close to their original pre-trained distributions, whereas for learning 2-bit networks or below, the representations change drastically. By optimizing training schemes and refining quantization functions, ParetoQ surpasses all previous methods tailored to specific bit widths. Remarkably, our ParetoQ ternary 600M-parameter model even outperforms the previous SoTA ternary 3B-parameter model in accuracy, using only one-fifth of the parameters. Extensive experimentation shows that ternary, 2-bit, and 3-bit quantization maintains comparable performance in the size-accuracy trade-off and generally exceeds 4-bit and binary quantization. Considering hardware constraints, 2-bit quantization offers promising potential for memory reduction and speedup.

Even when massively overparameterized, deep neural networks show a remarkable ability to generalize. Research on this phenomenon has focused on generalization within distribution, via smooth interpolation. Yet in some settings neural networks also learn to extrapolate to data far beyond the bounds of the original training set, sometimes even allowing for infinite generalization, implying that an algorithm capable of solving the task has been learned. Here we undertake a case study of the learning dynamics of recurrent neural networks (RNNs) trained on the streaming parity task in order to develop an effective theory of algorithm development. The streaming parity task is a simple but nonlinear task defined on sequences up to arbitrary length. We show that, with sufficient finite training experience, RNNs exhibit a phase transition to perfect infinite generalization. Using an effective theory for the representational dynamics, we find an implicit representational merger effect which can be interpreted as the construction of a finite automaton that reproduces the task. Overall, our results disclose one mechanism by which neural networks can generalize infinitely from finite training experience.

The planned space-based gravitational wave detector, LISA, will provide a fundamentally new means of studying the orbital alignment of close white dwarf binaries. However, due to the inherent symmetry of their gravitational wave signals, a fourfold degeneracy arises in the transverse projections of their angular momentum vectors. In this paper, we demonstrate that by incorporating timing information from electromagnetic observations, such as radial velocity modulations and light curves, this degeneracy can be reduced to twofold.

Quantized neural networks employ reduced precision representations for both weights and activations. This quantization process significantly reduces the memory requirements and computational complexity of the network. Binary Neural Networks (BNNs) are the extreme quantization case, representing values with just one bit. Since the sign function is typically used to map real values to binary values, smooth approximations are introduced to mimic the gradients during error backpropagation. Thus, the mismatch between the forward and backward models corrupts the direction of the gradient, causing training inconsistency problems and performance degradation. In contrast to current BNN approaches, we propose to employ a binary periodic (BiPer) function during binarization. Specifically, we use a square wave for the forward pass to obtain the binary values and employ the trigonometric sine function with the same period of the square wave as a differentiable surrogate during the backward pass. We demonstrate that this approach can control the quantization error by using the frequency of the periodic function and improves network performance. Extensive experiments validate the effectiveness of BiPer in benchmark datasets and network architectures, with improvements of up to 1% and 0.69% with respect to state-of-the-art methods in the classification task over CIFAR-10 and ImageNet, respectively. Our code is publicly available at https://github.com/edmav4/BiPer.

The Minimum-Weight Perfect Matching (MWPM) decoder is widely used in Quantum Error Correction (QEC) decoding. Despite its high accuracy, existing implementations of the MWPM decoder cannot catch up with quantum hardware, e.g., 1 million measurements per second for superconducting qubits. They suffer from a backlog of measurements that grows exponentially and as a result, cannot realize the power of quantum computation. We design and implement a fast MWPM decoder, called Parity Blossom, which reaches a time complexity almost proportional to the number of defect measurements. We further design and implement a parallel version of Parity Blossom called Fusion Blossom. Given a practical circuit-level noise of 0.1%, Fusion Blossom can decode a million measurement rounds per second up to a code distance of 33. Fusion Blossom also supports stream decoding mode that reaches a 0.7 ms decoding latency at code distance 21 regardless of the measurement rounds.

In this study, we propose a simple method for fault-tolerant Strassen-like matrix multiplications. The proposed method is based on using two distinct Strassen-like algorithms instead of replicating a given one. We have realized that using two different algorithms, new check relations arise resulting in more local computations. These local computations are found using computer aided search. To improve performance, special parity (extra) sub-matrix multiplications (PSMMs) are generated (two of them) at the expense of increasing communication/computation cost of the system. Our preliminary results demonstrate that the proposed method outperforms a Strassen-like algorithm with two copies and secures a very close performance to three copy version using only 2 PSMMs, reducing the total number of compute nodes by around 24\% i.e., from 21 to 16.

Deep Neural Networks (DNN) have achieved state-of-the-art results in a wide range of tasks, with the best results obtained with large training sets and large models. In the past, GPUs enabled these breakthroughs because of their greater computational speed. In the future, faster computation at both training and test time is likely to be crucial for further progress and for consumer applications on low-power devices. As a result, there is much interest in research and development of dedicated hardware for Deep Learning (DL). Binary weights, i.e., weights which are constrained to only two possible values (e.g. -1 or 1), would bring great benefits to specialized DL hardware by replacing many multiply-accumulate operations by simple accumulations, as multipliers are the most space and power-hungry components of the digital implementation of neural networks. We introduce BinaryConnect, a method which consists in training a DNN with binary weights during the forward and backward propagations, while retaining precision of the stored weights in which gradients are accumulated. Like other dropout schemes, we show that BinaryConnect acts as regularizer and we obtain near state-of-the-art results with BinaryConnect on the permutation-invariant MNIST, CIFAR-10 and SVHN.

The realization of scalable fault-tolerant quantum computing is expected to hinge on quantum error-correcting codes. In the quest for more efficient quantum fault tolerance, a critical code parameter is the weight of measurements that extract information about errors to enable error correction: as higher measurement weights require higher implementation costs and introduce more errors, it is important in code design to optimize measurement weight. This underlies the surging interest in quantum low-density parity-check (qLDPC) codes, the study of which has primarily focused on the asymptotic (large-code-limit) properties. In this work, we introduce a versatile and computationally efficient approach to stabilizer code weight reduction based on reinforcement learning (RL), which produces new low-weight codes that substantially outperform the state of the art in practically relevant parameter regimes, extending significantly beyond previously accessible small distances. For example, our approach demonstrates savings in physical qubit overhead compared to existing results by 1 to 2 orders of magnitude for weight 6 codes and brings the overhead into a feasible range for near-future experiments. We also investigate the interplay between code parameters using our RL framework, offering new insights into the potential efficiency and power of practically viable coding strategies. Overall, our results demonstrate how RL can effectively advance the crucial yet challenging problem of quantum code discovery and thereby facilitate a faster path to the practical implementation of fault-tolerant quantum technologies.

Binary classical information is routinely encoded in the two metastable states of a dynamical system. Since these states may exhibit macroscopic lifetimes, the encoded information inherits a strong protection against bit-flips. A recent qubit - the cat-qubit - is encoded in the manifold of metastable states of a quantum dynamical system, thereby acquiring bit-flip protection. An outstanding challenge is to gain quantum control over such a system without breaking its protection. If this challenge is met, significant shortcuts in hardware overhead are forecast for quantum computing. In this experiment, we implement a cat-qubit with bit-flip times exceeding ten seconds. This is a four order of magnitude improvement over previous cat-qubit implementations, and six orders of magnitude enhancement over the single photon lifetime that compose this dynamical qubit. This was achieved by introducing a quantum tomography protocol that does not break bit-flip protection. We prepare and image quantum superposition states, and measure phase-flip times above 490 nanoseconds. Most importantly, we control the phase of these superpositions while maintaining the bit-flip time above ten seconds. This work demonstrates quantum operations that preserve macroscopic bit-flip times, a necessary step to scale these dynamical qubits into fully protected hardware-efficient architectures.

We discuss methods for modeling eclipsing binary stars using the "physical", "simplified" and "phenomenological" models. There are few realizations of the "physical" Wilson-Devinney (1971) code and its improvements, e.g. Binary Maker, Phoebe. A parameter search using the Monte-Carlo method was realized by Zola et al. (2010), which is efficient in expense of too many evaluations of the test function. We compare existing algorithms of minimization of multi-parametric functions and propose to use a "combined" algorithm, depending on if the Hessian matrix is positively determined. To study methods, a simply fast-computed function resembling the "complete" test function for the physical model. Also we adopt a simplified model of an eclipsing binary at a circular orbit assuming spherical components with an uniform brightness distribution. This model resembles more advanced models in a sense of correlated parameter estimates due to a similar topology of the test function. Such a model may be applied to detached Algol-type systems, where the tidal distortion of components is negligible.

In this paper we show some remarkable consequences of the method which proves that every bisymmetric, symmetric, reflexive, strictly monotonic binary map on a proper interval is continuous, in particular it is a quasi-arithmetic mean. Now we demonstrate that this result can be refined in the way that the symmetry condition can be weakened by assuming symmetry only for a pair of distinct points of an interval.

We consider the possibility that gravity breaks parity, with left and right handed gravitons coupling to matter with a different Newton's constant and show that this would affect their zero-point vacuum fluctuations during inflation. Should there be a cosmic background of gravity waves, the effect would translate into anomalous CMB polarization. Non-vanishing TB (and EB) polarization components emerge, revealing interesting experimental targets. Indeed if reasonable chirality is present a TB measurement would provide the easiest way to detect a gravitational wave background. We speculate on the theoretical implications of such an observation.

Ternary and binary neural networks enable multiplication-free computation and promise multiple orders of magnitude efficiency gains over full-precision networks if implemented on specialized hardware. However, since both the parameter and the output space are highly discretized, such networks have proven very difficult to optimize. The difficulties are compounded for the class of transformer text generation models due to the sensitivity of the attention operation to quantization and the noise-compounding effects of autoregressive decoding in the high-cardinality output space. We approach the problem with a mix of statistics-based quantization for the weights and elastic quantization of the activations and demonstrate the first ternary and binary transformer models on the downstream tasks of summarization and machine translation. Our ternary BART base achieves an R1 score of 41 on the CNN/DailyMail benchmark, which is merely 3.9 points behind the full model while being 16x more efficient. Our binary model, while less accurate, achieves a highly non-trivial score of 35.6. For machine translation, we achieved BLEU scores of 21.7 and 17.6 on the WMT16 En-Ro benchmark, compared with a full precision mBART model score of 26.8. We also compare our approach in the 8-bit activation setting, where our ternary and even binary weight models can match or outperform the best existing 8-bit weight models in the literature. Our code and models are available at: https://github.com/facebookresearch/Ternary_Binary_Transformer

We propose a novel method to probe the persistent hints of Lepton Flavour Universality violation observed in semileptonic B decays. Relying on the specific properties of the Belle II experiment, it consists in comparing the inclusive rates of Υ(4S) to e^pm μ^mp X, Υ(4S) to μ^pm τ_{rm had}^mp X and Υ(4S) to e^pm τ_{rm had}^mp X. We show that such a measurement can be directly related to the ratio R(X)_{τell} equiv Γ(bto X τν) / Γ(b to X ell ν) (ell=e or μ), once appropriate experimental cuts are applied to suppress the effects of neutral B mixing and leptons emitted through charm or tau decays. Such a measurement would thus constitute an additional and potentially competitive probe of Lepton Flavour Universality in bto cellν transitions, complementary to existing exclusive measurements, accessible in the Belle II environment.

We propose a quark flavor model based on modular S'_4 with a general CP symmetry. CP violation in the quark sector is entirely realized by the modulus langle τrangle. We show that the canonical normalization induced by the Kähler metric plays a crucial role in reproducing the observed hierarchies, while maintaining coupling constants of order O(1). The minimal model achieves a great fit to the quark sector data, which we take as the PDG 2024 data extrapolated to the GUT scale.

The study of CP violation in hyperon transitions has a long history. In the early 2000s the HyperCP experiment made a major effort to seek CP-odd signals in the decay sequence Xi^-toLambda pi^- and Lambdato ppi^-, which motivated more searches. Most recently the BESIII and LHCb Collaborations have acquired or improved the upper bounds on CP violation in a variety of hyperon nonleptonic processes, including Sigma^+to npi^+ and Sigma^+to ppi^0. These measurements have not reached the standard-model level yet, but have stimulated a renewed interest in CP-violating new physics in strange-quark decay beyond what is constrained by the parameters varepsilon and varepsilon^prime from the kaon sector. In this paper, after updating the standard-model expectations for CP-odd observables in the modes Sigma^pmto Npi, we revisit new-physics scenarios that could enhance the corresponding quantities in Lambdato Npi and XitoLambdapi and apply them to the Sigma^pm modes. We find that the CP asymmetries in the latter can be significantly increased over the standard-model expectations, at levels which may be tested in the ongoing BESIII experiment and in future endeavors such as PANDA and the Super Tau Charm Facility.

Linear Recurrent Neural Networks (LRNNs) such as Mamba, RWKV, GLA, mLSTM, and DeltaNet have emerged as efficient alternatives to Transformers for long sequences. However, both Transformers and LRNNs struggle to perform state-tracking, which may impair performance in tasks such as code evaluation. In one forward pass, current architectures are unable to solve even parity, the simplest state-tracking task, which non-linear RNNs can handle effectively. Recently, Sarrof et al. (2024) demonstrated that the failure of LRNNs like Mamba to solve parity stems from restricting the value range of their diagonal state-transition matrices to [0, 1] and that incorporating negative values can resolve this issue. We extend this result to non-diagonal LRNNs such as DeltaNet. We prove that finite precision LRNNs with state-transition matrices having only positive eigenvalues cannot solve parity, while non-triangular matrices are needed to count modulo 3. Notably, we also prove that LRNNs can learn any regular language when their state-transition matrices are products of identity minus vector outer product matrices, each with eigenvalues in the range [-1, 1]. Our experiments confirm that extending the eigenvalue range of Mamba and DeltaNet to include negative values not only enables them to solve parity but consistently improves their performance on state-tracking tasks. We also show that state-tracking enabled LRNNs can be pretrained stably and efficiently at scale (1.3B parameters), achieving competitive performance on language modeling and showing promise on code and math tasks.

We revisit the noisy binary search model of Karp and Kleinberg, in which we have n coins with unknown probabilities p_i that we can flip. The coins are sorted by increasing p_i, and we would like to find where the probability crosses (to within varepsilon) of a target value tau. This generalized the fixed-noise model of Burnashev and Zigangirov , in which p_i = 1{2} pm varepsilon, to a setting where coins near the target may be indistinguishable from it. Karp and Kleinberg showed that Theta(1{varepsilon^2} log n) samples are necessary and sufficient for this task. We produce a practical algorithm by solving two theoretical challenges: high-probability behavior and sharp constants. We give an algorithm that succeeds with probability 1-delta from \[ 1{C_{\tau, \varepsilon}} \cdot \left(\lg n + O(\log^{2/3} n \log^{1/3} 1{\delta} + \log 1{\delta})\right) \] samples, where C_{tau, varepsilon} is the optimal such constant achievable. For delta > n^{-o(1)} this is within 1 + o(1) of optimal, and for delta ll 1 it is the first bound within constant factors of optimal.

Understanding properties of deep neural networks is an important challenge in deep learning. In this paper, we take a step in this direction by proposing a rigorous way of verifying properties of a popular class of neural networks, Binarized Neural Networks, using the well-developed means of Boolean satisfiability. Our main contribution is a construction that creates a representation of a binarized neural network as a Boolean formula. Our encoding is the first exact Boolean representation of a deep neural network. Using this encoding, we leverage the power of modern SAT solvers along with a proposed counterexample-guided search procedure to verify various properties of these networks. A particular focus will be on the critical property of robustness to adversarial perturbations. For this property, our experimental results demonstrate that our approach scales to medium-size deep neural networks used in image classification tasks. To the best of our knowledge, this is the first work on verifying properties of deep neural networks using an exact Boolean encoding of the network.

The surface code family is a promising approach to implementing fault-tolerant quantum computations. Universal fault-tolerance requires error-corrected non-Clifford operations, in addition to Clifford gates, and for the former, it is imperative to experimentally demonstrate additional resources known as magic states. Another challenge is to efficiently embed surface codes into quantum hardware with connectivity constraints. This work simultaneously addresses both challenges by employing a qubit-efficient rotated heavy-hexagonal surface code for IBM quantum processors (ibm\_fez) and implementing the magic state injection protocol. Our work reports error thresholds for both logical bit- and phase-flip errors, of approx0.37% and approx0.31%, respectively, which are higher than the threshold values previously reported with traditional embedding. The post-selection-based preparation of logical magic states |H_Lrangle and |T_Lrangle achieve fidelities of 0.8806pm0.0002 and 0.8665pm0.0003, respectively, which are both above the magic state distillation threshold. Additionally, we report the minimum fidelity among injected arbitrary single logical qubit states as 0.8356pm0.0003. Our work demonstrates the potential for realising non-Clifford logical gates by producing high-fidelity logical magic states on IBM quantum devices.

A single two-input gate suffices for all of Boolean logic in digital hardware. No comparable primitive has been known for continuous mathematics: computing elementary functions such as sin, cos, sqrt, and log has always required multiple distinct operations. Here I show that a single binary operator, eml(x,y)=exp(x)-ln(y), together with the constant 1, generates the standard repertoire of a scientific calculator. This includes constants such as e, pi, and i; arithmetic operations including addition, subtraction, multiplication, division, and exponentiation as well as the usual transcendental and algebraic functions. For example, exp(x)=eml(x,1), ln(x)=eml(1,eml(eml(1,x),1)), and likewise for all other operations. That such an operator exists was not anticipated; I found it by systematic exhaustive search and established constructively that it suffices for the concrete scientific-calculator basis. In EML (Exp-Minus-Log) form, every such expression becomes a binary tree of identical nodes, yielding a grammar as simple as S -> 1 | eml(S,S). This uniform structure also enables gradient-based symbolic regression: using EML trees as trainable circuits with standard optimizers (Adam), I demonstrate the feasibility of exact recovery of closed-form elementary functions from numerical data at shallow tree depths up to 4. The same architecture can fit arbitrary data, but when the generating law is elementary, it may recover the exact formula.

The Stokes V parameter characterizes asymmetry of amplitudes between right- and left-handed waves, and non-vanishing value of the V parameter yields a circularly polarized signal. Cosmologically, V parameter may be a direct probe for parity violation in the universe. In this paper, we theoretically investigate a measurement of this parameter, particularly focusing on the gravitational-wave backgrounds observed via ground-based interferometers. In contrast to the traditional analysis that only considers the total amplitude (or equivalently Omega_{GW}), the signal analysis including a circular-polarized mode has a rich structure due to the multi-dimensionality of target parameters. We show that, by using the network of next-generation detectors, separation between polarized and unpolarized modes can be performed with small statistical loss induced by their correlation.

Binary neural networks utilize 1-bit quantized weights and activations to reduce both the model's storage demands and computational burden. However, advanced binary architectures still incorporate millions of inefficient and nonhardware-friendly full-precision multiplication operations. A&B BNN is proposed to directly remove part of the multiplication operations in a traditional BNN and replace the rest with an equal number of bit operations, introducing the mask layer and the quantized RPReLU structure based on the normalizer-free network architecture. The mask layer can be removed during inference by leveraging the intrinsic characteristics of BNN with straightforward mathematical transformations to avoid the associated multiplication operations. The quantized RPReLU structure enables more efficient bit operations by constraining its slope to be integer powers of 2. Experimental results achieved 92.30%, 69.35%, and 66.89% on the CIFAR-10, CIFAR-100, and ImageNet datasets, respectively, which are competitive with the state-of-the-art. Ablation studies have verified the efficacy of the quantized RPReLU structure, leading to a 1.14% enhancement on the ImageNet compared to using a fixed slope RLeakyReLU. The proposed add&bit-operation-only BNN offers an innovative approach for hardware-friendly network architecture.

We study the prospect of using TianQin to detect stellar-mass binary black holes (SBBHs). We estimate the expected detection number as well as the precision of parameter estimation on SBBH inspirals, using five different population models. We note TianQin can possibly detect a few SBBH inspirals with signal to noise ratios greater than 12; lowering the threshold and combining multiple detectors can both boost the detection number. The source parameters can be recovered with good precision for most events above the detection threshold. For example, the precision of the merger time most likely occurs near 1s, making it possible to guide the detection of the ground-based detectors, the precision of the eccentricity e_0 most likely occurs near 10^{-4}, making it possible to distinguish the formation channels, and the precision of the mass parameter is better than 10^{-6} in general and most likely occurs near 10^{-7}. We note, in particular, that for a typical merger event, the error volume is likely to be small enough to contain only the host galaxy, which could greatly help in the study of gravitational wave cosmology and relevant studies through the multimessenger observation.

The advent of 1-bit large language models (LLMs), led by BitNet b1.58, has spurred interest in ternary LLMs. Despite this, research and practical applications focusing on efficient edge inference for ternary LLMs remain scarce. To bridge this gap, we introduce Bitnet.cpp, an inference system optimized for BitNet b1.58 and ternary LLMs. Given that mixed-precision matrix multiplication (mpGEMM) constitutes the bulk of inference time in ternary LLMs, Bitnet.cpp incorporates a novel mpGEMM library to facilitate sub-2-bits-per-weight, efficient and lossless inference. The library features two core solutions: Ternary Lookup Table (TL), which addresses spatial inefficiencies of previous bit-wise methods, and Int2 with a Scale (I2_S), which ensures lossless edge inference, both enabling high-speed inference. Our experiments show that Bitnet.cpp achieves up to a 6.25x increase in speed over full-precision baselines and up to 2.32x over low-bit baselines, setting new benchmarks in the field. Additionally, we expand TL to element-wise lookup table (ELUT) for low-bit LLMs in the appendix, presenting both theoretical and empirical evidence of its considerable potential. Bitnet.cpp is publicly available at https://github.com/microsoft/BitNet/tree/paper , offering a sophisticated solution for the efficient and practical deployment of edge LLMs.

The binary sum-of-digits function s returns the number of ones in the binary expansion of a nonnegative integer. Cusick's Hamming weight conjecture states that, for all integers tgeq 0, the set of nonnegative integers n such that s(n+t)geq s(n) has asymptotic density strictly larger than 1/2. We are concerned with the block-additive function r returning the number of (overlapping) occurrences of the block 11 in the binary expansion of n. The main result of this paper is a central limit-type theorem for the difference r(n+t)-r(n): the corresponding probability function is uniformly close to a Gaussian, where the uniform error tends to 0 as the number of blocks of ones in the binary expansion of t tends to infty.

Low-precision number formats are widely used in modern machine learning systems due to their efficiency. Accurate direction representation is key to the accuracy of vector operations. This work precisely explores the extent to which the direction of a vector can be represented by selecting its scalar elements from a common finite alphabet of a given size. This is standard practice in machine learning, where low-precision significands may be narrow-width floating-point or integer values. A geometric framework is introduced for analyzing the directional coverage of such product-structured codes. This work analytically quantifies the suboptimality gap between such product-structured codes and spherical codes for the vector as a whole, in both low and asymptotically high dimensions. Furthermore, within the product code class, it is proven that the standard formats of two's complement, fixed-point, and floating-point are suboptimal, again with quantified gap, pointing to the potential to develop new scalar number formats. Such scalar alphabets are numerically optimized across multiple block dimensions for directional coverage, including the dimension used in NVIDIA's NVFP4 format. Experimental results are presented comparing the performance of standard formats and the optimized alphabet. We find that for four bits, NVIDIA's choice of E2M1 closely approximates the optimized alphabet, providing a geometric explanation for its strong performance in low-precision machine learning workloads and an analytical understanding of the link between that superiority and block size. We provide open-source formal proofs in Lean for the theorems in this work, along with the experimental code and the optimized alphabets obtained.

Recent research, such as BitNet, is paving the way for a new era of 1-bit Large Language Models (LLMs). In this work, we introduce a 1-bit LLM variant, namely BitNet b1.58, in which every single parameter (or weight) of the LLM is ternary {-1, 0, 1}. It matches the full-precision (i.e., FP16 or BF16) Transformer LLM with the same model size and training tokens in terms of both perplexity and end-task performance, while being significantly more cost-effective in terms of latency, memory, throughput, and energy consumption. More profoundly, the 1.58-bit LLM defines a new scaling law and recipe for training new generations of LLMs that are both high-performance and cost-effective. Furthermore, it enables a new computation paradigm and opens the door for designing specific hardware optimized for 1-bit LLMs.

Network binarization emerges as one of the most promising compression approaches offering extraordinary computation and memory savings by minimizing the bit-width. However, recent research has shown that applying existing binarization algorithms to diverse tasks, architectures, and hardware in realistic scenarios is still not straightforward. Common challenges of binarization, such as accuracy degradation and efficiency limitation, suggest that its attributes are not fully understood. To close this gap, we present BiBench, a rigorously designed benchmark with in-depth analysis for network binarization. We first carefully scrutinize the requirements of binarization in the actual production and define evaluation tracks and metrics for a comprehensive and fair investigation. Then, we evaluate and analyze a series of milestone binarization algorithms that function at the operator level and with extensive influence. Our benchmark reveals that 1) the binarized operator has a crucial impact on the performance and deployability of binarized networks; 2) the accuracy of binarization varies significantly across different learning tasks and neural architectures; 3) binarization has demonstrated promising efficiency potential on edge devices despite the limited hardware support. The results and analysis also lead to a promising paradigm for accurate and efficient binarization. We believe that BiBench will contribute to the broader adoption of binarization and serve as a foundation for future research. The code for our BiBench is released https://github.com/htqin/BiBench .

Consider the following process: Take any four-digit number which has at least two distinct digits. Then, rearrange the digits of the original number in ascending and descending order, take these two numbers, and find the difference between the two. Finally, repeat this routine using the difference as the new four-digit number. In 1949, D. R. Kaprekar became the first to discover that this process, known as the Kaprekar Routine, would always yield 6174 within 7 iterations. Since this number remains unchanged after an application of the Kaprekar Routine, it became known as Kaprekar's Constant. Previous works have shown that the only base 10 Kaprekar's Constants are 495 and 6174, the 3-digit and 4-digit case. However, little attention has been given to other bases or determining which digit cases and which bases have a Kaprekar's Constant. This paper analyzes the behavior of the Kaprekar Routine in the 3-digit case, deriving an expression for all 3-digit Kaprekar Constants. In addition, the author developed a series of C++ programs to analyze the paths integers followed to their respective Kaprekar's Constant. Surprisingly, it was determined from this program that the most commonly required number of iterations required to reach Kaprekar's Constant for 3-digit integers was consistently 3, regardless of base. When loaded as a matrix, the iteration requirement data demonstrates a precise recurring relationship reminiscent of Pascal's Triangle.

We study primordial gravitational waves produced during inflation in quantum gravity at a Lifshitz point proposed by Ho{rmr}ava. Assuming power-counting renormalizability, foliation preserving diffeomorphism invariance, and the condition of detailed balance, we show that primordial gravitational waves are circularly polarized due to parity violation. The chirality of primordial gravitational waves is a quite robust prediction of quantum gravity at a Lifshitz point which can be tested through observations of cosmic microwave background radiation and stochastic gravitational waves.

Binary Neural Network (BNN) represents convolution weights with 1-bit values, which enhances the efficiency of storage and computation. This paper is motivated by a previously revealed phenomenon that the binary kernels in successful BNNs are nearly power-law distributed: their values are mostly clustered into a small number of codewords. This phenomenon encourages us to compact typical BNNs and obtain further close performance through learning non-repetitive kernels within a binary kernel subspace. Specifically, we regard the binarization process as kernel grouping in terms of a binary codebook, and our task lies in learning to select a smaller subset of codewords from the full codebook. We then leverage the Gumbel-Sinkhorn technique to approximate the codeword selection process, and develop the Permutation Straight-Through Estimator (PSTE) that is able to not only optimize the selection process end-to-end but also maintain the non-repetitive occupancy of selected codewords. Experiments verify that our method reduces both the model size and bit-wise computational costs, and achieves accuracy improvements compared with state-of-the-art BNNs under comparable budgets.

An open-source C++ framework for discovering fast matrix multiplication schemes using the flip graph approach is presented. The framework supports multiple coefficient rings -- binary (Z_2), modular ternary (Z_3) and integer ternary (Z_T = {-1,0,1}) -- and implements both fixed-dimension and meta-dimensional search operators. Using efficient bit-level encoding of coefficient vectors and OpenMP parallelism, the tools enable large-scale exploration on commodity hardware. The study covers 680 schemes ranging from (2 times 2 times 2) to (16 times 16 times 16), with 276 schemes now in Z_T coefficients and 117 in integer coefficients. With this framework, the multiplicative complexity (rank) is improved for 79 matrix multiplication schemes. Notably, a new 4 times 4 times 10 scheme requiring only 115 multiplications is discovered, achieving ωapprox 2.80478 and beating Strassen's exponent for this specific size. Additionally, 93 schemes are rediscovered in ternary coefficients that were previously known only over rationals or integers, and 68 schemes in integer coefficients that previously required fractions. All tools and discovered schemes are made publicly available to enable reproducible research.

Matrix multiplication optimization remains a fundamental challenge in computational mathematics. This work introduces a novel approach that discovers matrix multiplication schemes in the ternary field (Z_T), where coefficients are restricted to {-1, 0, 1} to minimize naive additive complexity. The core of the method is a GPU-accelerated meta flip graph algorithm that maintains ternary safety through specialized arithmetic operations and sign symmetry breaking. Key results include new best ranks for the formats 4 times 5 times 12, 5 times 6 times 10, and 6 times 7 times 9, the independent discovery of 32 schemes in Z_T that match known optimal ranks (including 8 previously known only with rational coefficients), and 30 rank improvements in the binary field. The analysis of 164 known schemes shows that 92 can be implemented in Z_T, while 72 could not be found in the ternary field with current methods, defining the current boundaries of this approach. All software, results, and discovered schemes are provided as open-source.

Photon loss and dephasing rapidly degrade the sensitivity of quantum sensors, yet systematic methods for designing error-correcting codes whose geometry is simultaneously adapted to the sensing task and the noise channel do not exist. Here we establish that orbital-angular-momentum (OAM) encoding and Gottesman-Kitaev-Preskill (GKP) lattice geometry are structurally coupled: an OAM mode of topological charge ell induces a phase-space rotation θ_ell=ellπ/ell_{max}, corresponding to a family of twisted GKP stabilizer lattices. Using an end-to-end differentiable Strawberry Fields--TensorFlow circuit, we jointly optimise ell, the lattice aspect ratio r, and the finite-energy envelope ε to maximise quantum Fisher information subject to P_{rm err}leq10^{-3}. The optimum occurs at the fractional charge ell=1.5 (θ=67.5^circ), implementable with a half-integer spiral phase plate, which reduces P_{rm err} by 23.9times relative to the square-lattice baseline while leaving F_Q unchanged to within 0.2%. This surpasses the best integer value (ell=2, 15.7times) and arises from an exact 180^circ periodicity of the P_{rm err}(θ) landscape, confirmed analytically and numerically. We derive a transcendental balance equation for the optimal angle θ^*(η,γ,r) and prove that it decreases with both γ and η. A Shannon-inspired metrological capacity C=F_Qcdot(-ln P_{rm err}), maximised at ell=1.5 with a 41% gain over the square lattice, quantifies the joint sensitivity--fault-tolerance resource. These results establish a geometric design principle for noise-adaptive quantum sensors and a fully open-source differentiable template extensible to other bosonic code families.

We present a new approach for mitigating unfairness in learned classifiers. In particular, we focus on binary classification tasks over individuals from two populations, where, as our criterion for fairness, we wish to achieve similar false positive rates in both populations, and similar false negative rates in both populations. As a proof of concept, we implement our approach and empirically evaluate its ability to achieve both fairness and accuracy, using datasets from the fields of criminal risk assessment, credit, lending, and college admissions.

We introduce a quantum neural network, QNN, that can represent labeled data, classical or quantum, and be trained by supervised learning. The quantum circuit consists of a sequence of parameter dependent unitary transformations which acts on an input quantum state. For binary classification a single Pauli operator is measured on a designated readout qubit. The measured output is the quantum neural network's predictor of the binary label of the input state. First we look at classifying classical data sets which consist of n-bit strings with binary labels. The input quantum state is an n-bit computational basis state corresponding to a sample string. We show how to design a circuit made from two qubit unitaries that can correctly represent the label of any Boolean function of n bits. For certain label functions the circuit is exponentially long. We introduce parameter dependent unitaries that can be adapted by supervised learning of labeled data. We study an example of real world data consisting of downsampled images of handwritten digits each of which has been labeled as one of two distinct digits. We show through classical simulation that parameters can be found that allow the QNN to learn to correctly distinguish the two data sets. We then discuss presenting the data as quantum superpositions of computational basis states corresponding to different label values. Here we show through simulation that learning is possible. We consider using our QNN to learn the label of a general quantum state. By example we show that this can be done. Our work is exploratory and relies on the classical simulation of small quantum systems. The QNN proposed here was designed with near-term quantum processors in mind. Therefore it will be possible to run this QNN on a near term gate model quantum computer where its power can be explored beyond what can be explored with simulation.

One of the fundamental challenges in enabling fault-tolerant quantum computation is realising fast enough quantum decoders. We present a new two-stage decoder that accelerates the decoding cycle and boosts accuracy. In the first stage, a partial decoder based on belief propagation is used to correct errors that occurred with high probability. In the second stage, a conventional decoder corrects any remaining errors. We study the performance of our two-stage decoder with simulations using the surface code under circuit-level noise. When the conventional decoder is minimum-weight perfect matching, adding the partial decoder decreases bandwidth requirements, increases speed and improves logical accuracy. Specifically, we observe partial decoding consistently speeds up the minimum-weight perfect matching stage by between 2x-4x on average depending on the parameter regime, and raises the threshold from 0.94% to 1.02%.

If h is a ring-valued function on a simplicial complex G we can define two matrices L and g, where the matrix entries are the h energy of homoclinic intersections. We know that the sum over all h values on G is equal to the sum of the Green matrix entries g(x,y). We also have already seen that that the determinants of L or g are both the product of the h(x). In the case where h(x) is the parity of dimension, the sum of the energy values was the standard Euler characteristic and the determinant was a unit. If h(x) was the unit in the ring then L,g are integral quadratic forms which are isospectral and inverse matrices of each other. We prove here that the quadratic energy expression summing over all pairs h(x)^* h(y) of intersecting sets is a signed sum of squares of Green function entries. The quadratic energy expression is Wu characteristic in the case when h is dimension parity. For general h, the quadratic energy expression resembles an Ising Heisenberg type interaction. The conjugate of g is the inverse of L if h takes unit values in a normed ring or in the group of unitary operators in an operator algebra.

Low-precision neural network training has emerged as a promising direction for reducing computational costs and democratizing access to deep learning research. However, existing 4-bit quantization methods either rely on expensive GPU infrastructure or suffer from significant accuracy degradation. In this work, we present a practical method for training convolutional neural networks at true 4-bit precision using standard PyTorch operations on commodity CPUs. We introduce a novel tanh-based soft weight clipping technique that, combined with symmetric quantization, dynamic per-layer scaling, and straight-through estimators, achieves stable convergence and competitive accuracy. Training a VGG-style architecture with 3.25 million parameters from scratch on CIFAR-10, our method achieves 92.34% test accuracy on Google Colab's free CPU tier -- matching full-precision baseline performance (92.5%) with only a 0.16% gap. We further validate on CIFAR-100, achieving 70.94% test accuracy across 100 classes with the same architecture and training procedure, demonstrating that 4-bit training from scratch generalizes to harder classification tasks. Both experiments achieve 8x memory compression over FP32 while maintaining exactly 15 unique weight values per layer throughout training. We additionally validate hardware independence by demonstrating rapid convergence on a consumer mobile device (OnePlus 9R), achieving 83.16% accuracy in only 6 epochs. To the best of our knowledge, no prior work has demonstrated 4-bit quantization-aware training achieving full-precision parity on standard CPU hardware without specialized kernels or post-training quantization.

As recently demonstrated, Deep Neural Networks (DNN), usually trained using single precision IEEE 754 floating point numbers (binary32), can also work using lower precision. Therefore, 16-bit and 8-bit compressed format have attracted considerable attention. In this paper, we focused on two families of formats that have already achieved interesting results in compressing binary32 numbers in machine learning applications, without sensible degradation of the accuracy: bfloat and posit. Even if 16-bit and 8-bit bfloat/posit are routinely used for reducing the storage of the weights/biases of trained DNNs, the inference still often happens on the 32-bit FPU of the CPU (especially if GPUs are not available). In this paper we propose a way to decompress a tensor of bfloat/posits just before computations, i.e., after the compressed operands have been loaded within the vector registers of a vector capable CPU, in order to save bandwidth usage and increase cache efficiency. Finally, we show the architectural parameters and considerations under which this solution is advantageous with respect to the uncompressed one.

Recent advances in 1-bit Large Language Models (LLMs), such as BitNet and BitNet b1.58, present a promising approach to enhancing the efficiency of LLMs in terms of speed and energy consumption. These developments also enable local LLM deployment across a broad range of devices. In this work, we introduce bitnet.cpp, a tailored software stack designed to unlock the full potential of 1-bit LLMs. Specifically, we develop a set of kernels to support fast and lossless inference of ternary BitNet b1.58 LLMs on CPUs. Extensive experiments demonstrate that bitnet.cpp achieves significant speedups, ranging from 2.37x to 6.17x on x86 CPUs and from 1.37x to 5.07x on ARM CPUs, across various model sizes. The code is available at https://github.com/microsoft/BitNet.

In this paper, we study quantum Ordered Binary Decision Diagrams(OBDD) model; it is a restricted version of read-once quantum branching programs, with respect to "width" complexity. It is known that the maximal gap between deterministic and quantum complexities is exponential. But there are few examples of functions with such a gap. We present a new technique ("reordering") for proving lower bounds and upper bounds for OBDD with an arbitrary order of input variables if we have similar bounds for the natural order. Using this transformation, we construct a total function REQ such that the deterministic OBDD complexity of it is at least 2^{Ω(n / log n)}, and the quantum OBDD complexity of it is at most O(n^2/log n). It is the biggest known gap for explicit functions not representable by OBDDs of a linear width. Another function(shifted equality function) allows us to obtain a gap 2^{Ω(n)} vs O(n^2). Moreover, we prove the bounded error quantum and probabilistic OBDD width hierarchies for complexity classes of Boolean functions. Additionally, using "reordering" method we extend a hierarchy for read-k-times Ordered Binary Decision Diagrams (k-OBDD) of polynomial width, for k = o(n / log^3 n). We prove a similar hierarchy for bounded error probabilistic k-OBDDs of polynomial, superpolynomial and subexponential width. The extended abstract of this work was presented on International Computer Science Symposium in Russia, CSR 2017, Kazan, Russia, June 8 -- 12, 2017

We resolve a $1000 Erdős prize problem, complete with formal verification generated by a large language model. In over a dozen papers, beginning in 1976 and spanning two decades, Paul Erdős repeatedly posed one of his "favourite" conjectures: every finite Sidon set can be extended to a finite perfect difference set. We establish that {1, 2, 4, 8, 13} is a counterexample to this conjecture. During the preparation of this paper, we discovered that although this problem was presumed to be open for half a century, Marshall Hall, Jr. published a different counterexample three decades before Erdős first posed the problem. With a healthy skepticism of this apparent oversight, and out of an abundance of caution, we used ChatGPT to vibe code a Lean proof of both Hall's and our counterexamples.

Risk parity, also known as equal risk contribution, has recently gained increasing attention as a portfolio allocation method. However, solving portfolio weights must resort to numerical methods as the analytic solution is not available. This study improves two existing iterative methods: the cyclical coordinate descent (CCD) and Newton methods. We enhance the CCD method by simplifying the formulation using a correlation matrix and imposing an additional rescaling step. We also suggest an improved initial guess inspired by the CCD method for the Newton method. Numerical experiments show that the improved CCD method performs the best and is approximately three times faster than the original CCD method, saving more than 40% of the iterations.

The phenomenological parameters of eclipsing binary stars, which are the prototypes of the EA, EB and EW systems are determined using the expert complex of computer programs, which realizes the NAV ("New Algol Variable") algorithm (Andronov 2010, 2012) and its possible modifications are discussed, as well as constrains for estimates of some physical parameters of the systems in a case of photometric observations only, such as the degree of eclipse, ratio of the mean surface brightnesses of the components. The half-duration of the eclipse is 0.0617(7), 0.1092(18) and 0.1015(7) for Algol, beta Lyrae and W UMa, respectively. The brightness ratio is 6.8pm1.0, 4.9pm1.0 and 1.15pm0.13. These results show that the eclipses have distinct begin and end not only in EA (as generally assumed), but also in EB and EW - type systems as well. The algorithm may be applied to classification and study of the newly discovered (or poorly studied) eclipsing variables based on own observations or that obtained using photometric surveys.

Kerr nonlinear oscillators driven by a two-photon process are promising systems to encode quantum information and to ensure a hardware-efficient scaling towards fault-tolerant quantum computation. In this paper, we show that an extra control parameter, the detuning of the two-photon drive with respect to the oscillator resonance, plays a crucial role in the properties of the defined qubit. At specific values of this detuning, we benefit from strong symmetries in the system, leading to multiple degeneracies in the spectrum of the effective confinement Hamiltonian. Overall, these degeneracies lead to a stronger suppression of bit-flip errors. We also study the combination of such Hamiltonian confinement with colored dissipation to suppress leakage outside of the bosonic code space. We show that the additional degeneracies allow us to perform fast and high-fidelity gates while preserving a strong suppression of bit-flip errors.

This paper presents TULIP, a new architecture for a binary neural network (BNN) that uses an optimal schedule for executing the operations of an arbitrary BNN. It was constructed with the goal of maximizing energy efficiency per classification. At the top-level, TULIP consists of a collection of unique processing elements (TULIP-PEs) that are organized in a SIMD fashion. Each TULIP-PE consists of a small network of binary neurons, and a small amount of local memory per neuron. The unique aspect of the binary neuron is that it is implemented as a mixed-signal circuit that natively performs the inner-product and thresholding operation of an artificial binary neuron. Moreover, the binary neuron, which is implemented as a single CMOS standard cell, is reconfigurable, and with a change in a single parameter, can implement all standard operations involved in a BNN. We present novel algorithms for mapping arbitrary nodes of a BNN onto the TULIP-PEs. TULIP was implemented as an ASIC in TSMC 40nm-LP technology. To provide a fair comparison, a recently reported BNN that employs a conventional MAC-based arithmetic processor was also implemented in the same technology. The results show that TULIP is consistently 3X more energy-efficient than the conventional design, without any penalty in performance, area, or accuracy.

We present a hardware-oriented description of GoldenFloat (GF), a static-split floating-point family generated by a single closed rule, and three concrete artefacts: (i) an open multi-width RTL generator covering GF4-GF256 with a continuous-integration differential sweep against a correctly-rounded reference; (ii) an integer-backed Lucas-exact accumulator path verified at 500-digit precision for n = 1, ..., 256; and (iii) a GF16 FPGA codec passing a 35-of-35 testbench at 323 MHz on Artix-7 (Xilinx XC7A35T). For each total width N >= 4, the exponent width is e = round((N-1)/phi^2) with fraction f = N-1-e and phi = (1+sqrt(5))/2. The rule reproduces the realised exponent widths of nine formats (9/9) and extends consistently to GF128, GF512, GF1024. The rule is positioned alongside posit, takum, OCP-MX, and the IEEE P3109 multi-width float draft. We make no per-rung accuracy or superiority claim against any of them. The breadth/toolchain-coherence framing is recorded as an open conjecture with a pre-registered falsification path. A falsification ledger (FL-002) records open questions and the experiments that would settle them. An RTL-correctness erratum dated 2026-05-31 is reported; the fabricated TTSKY26b dies carry the defective multiplier portfolio, and the corrected generator is the regeneration baseline.

Automatically generating function summaries for binaries is an extremely valuable but challenging task, since it involves translating the execution behavior and semantics of the low-level language (assembly code) into human-readable natural language. However, most current works on understanding assembly code are oriented towards generating function names, which involve numerous abbreviations that make them still confusing. To bridge this gap, we focus on generating complete summaries for binary functions, especially for stripped binary (no symbol table and debug information in reality). To fully exploit the semantics of assembly code, we present a control flow graph and pseudo code guided binary code summarization framework called CP-BCS. CP-BCS utilizes a bidirectional instruction-level control flow graph and pseudo code that incorporates expert knowledge to learn the comprehensive binary function execution behavior and logic semantics. We evaluate CP-BCS on 3 different binary optimization levels (O1, O2, and O3) for 3 different computer architectures (X86, X64, and ARM). The evaluation results demonstrate CP-BCS is superior and significantly improves the efficiency of reverse engineering.

We introduce a technique that uses gauge fixing to significantly improve the quantum error correcting performance of subsystem codes. By changing the order in which check operators are measured, valuable additional information can be gained, and we introduce a new method for decoding which uses this information to improve performance. Applied to the subsystem toric code with three-qubit check operators, we increase the threshold under circuit-level depolarising noise from 0.67% to 0.81%. The threshold increases further under a circuit-level noise model with small finite bias, up to 2.22% for infinite bias. Furthermore, we construct families of finite-rate subsystem LDPC codes with three-qubit check operators and optimal-depth parity-check measurement schedules. To the best of our knowledge, these finite-rate subsystem codes outperform all known codes at circuit-level depolarising error rates as high as 0.2%, where they have a qubit overhead that is 4.3times lower than the most efficient version of the surface code and 5.1times lower than the subsystem toric code. Their threshold and pseudo-threshold exceeds 0.42% for circuit-level depolarising noise, increasing to 2.4% under infinite bias using gauge fixing.

We report a way to make a frozen small language model both more capable and dramatically cheaper at once, without changing any weights. Verified knowledge is deposited once as a byte-exact key-value (KV) state artifact and later restored, by graft, into a fresh inference context. The restore is bit-exact: under a pinned deterministic configuration, the grafted logits are byte-for-byte identical to a fresh computation (SHA-256 equality), with zero KL divergence and 100% argmax agreement over fifty samples. We show that own-position graft is the unique numerically exact operating point on a model with floating-point rotary encoding, and we verify byte-exactness on two model scales (12B, 31B) and two GPU targets, one through a pre-registered replay. On AIME 2025, a frozen Gemma-4-12B moves from 80.0% to 93.3% once a verified solution library is grafted, above its own 77.5% and its 31B sibling's 89.2% published anchors. On the recurring case, eight problems the base model never solves within a 401,026-token budget are answered from cached verified solutions in 61 total decode tokens, a factor of 6,574 fewer tokens and about 8,700x less energy; the capability claim proper rests on held-out transfer (7 of 7 at 31B). The same byte-exact store widens usable context from 32,768 to 2,854,766 tokens at zero extra accelerator memory, and moves byte-identical between machines of the same architecture. We describe the system at the behavior level; the engine is proprietary, and every reported number is backed by committed input and output hashes so the scoring can be re-checked without it.

This article provides an introduction to surface code quantum computing. We first estimate the size and speed of a surface code quantum computer. We then introduce the concept of the stabilizer, using two qubits, and extend this concept to stabilizers acting on a two-dimensional array of physical qubits, on which we implement the surface code. We next describe how logical qubits are formed in the surface code array and give numerical estimates of their fault-tolerance. We outline how logical qubits are physically moved on the array, how qubit braid transformations are constructed, and how a braid between two logical qubits is equivalent to a controlled-NOT. We then describe the single-qubit Hadamard, S and T operators, completing the set of required gates for a universal quantum computer. We conclude by briefly discussing physical implementations of the surface code. We include a number of appendices in which we provide supplementary information to the main text.

Very recently, the two-photon decay width of the η_b meson was computed with lattice QCD methods. This decay has not yet been measured. The knowledge of this width allows for the calculation of the η_b production cross section through photon-photon interactions in ultra-peripheral PbPb collisions. In this work we present this calculation, which is the first application of the lattice result. Since UPCs are gaining an increasing attention of the heavy ion community, we take the opportunity to perform a comprehensive study of the different ways of defining ultra-peripheral collisions and of the different ways to treat the equivalent photon flux.

We quantify the upper bound on the size of the implicit neural representation (INR) model from a digital perspective. The upper bound of the model size increases exponentially as the required bit-precision increases. To this end, we present a bit-plane decomposition method that makes INR predict bit-planes, producing the same effect as reducing the upper bound of the model size. We validate our hypothesis that reducing the upper bound leads to faster convergence with constant model size. Our method achieves lossless representation in 2D image and audio fitting, even for high bit-depth signals, such as 16-bit, which was previously unachievable. We pioneered the presence of bit bias, which INR prioritizes as the most significant bit (MSB). We expand the application of the INR task to bit depth expansion, lossless image compression, and extreme network quantization. Our source code is available at https://github.com/WooKyoungHan/LosslessINR

Massive contact binaries (CBs) are key to understanding close-binary evolution and stellar mergers, yet their study has been limited by the scarcity of observed systems, particularly of B-type binaries expected to dominate this class. We bridge this gap by mining a large sample of massive CB candidates from the OGLE-IV database, increasing their known numbers in the Magellanic Clouds by nearly an order of magnitude. Using main-sequence colour-magnitude limits, an observationally informed period-luminosity-colour relation for CBs, and a high morph-parameter cut (cgeq0.7), we identified 68 O- and B-type binaries that exhibit smooth, sinusoidal light curves with nearly equal eclipse depths. We then isolated a bona fide sample of 37 CB candidates (28 in the LMC and 9 in the SMC) that match theoretical colour-magnitude and period distributions derived from an extensive grid of MESA binary models. The bona fide sample, dominated by B-type systems with Papprox0.6-1 d, agrees with the predicted population and may contain many qapprox1 binaries, as expected from models showing mass equalization preceding temperature equalization during nuclear-timescale contact. Synthetic PHOEBE light curves of contact and near-contact phases of MESA models reveal a degeneracy between these configurations, suggesting possible misidentifications among these systems. Spectroscopic follow-up is required to test these predictions and refine the evolutionary framework of massive CBs.

In this article, we propose a new counter-based implementation of John von Neumann's middle-square random number generator (RNG). Several rounds of squaring are applied to a counter to produce a random output. We discovered that four rounds are sufficient to provide satisfactory data. Two versions of the RNG are presented, a 4-round version with 32-bit output and a 5-round version with 64-bit output. Both pass stringent tests of randomness and may be the fastest counter-based generators.

We present quantum circuits to implement an exhaustive key search for the Advanced Encryption Standard (AES) and analyze the quantum resources required to carry out such an attack. We consider the overall circuit size, the number of qubits, and the circuit depth as measures for the cost of the presented quantum algorithms. Throughout, we focus on Clifford+T gates as the underlying fault-tolerant logical quantum gate set. In particular, for all three variants of AES (key size 128, 192, and 256 bit) that are standardized in FIPS-PUB 197, we establish precise bounds for the number of qubits and the number of elementary logical quantum gates that are needed to implement Grover's quantum algorithm to extract the key from a small number of AES plaintext-ciphertext pairs.

Binary classification involves predicting the label of an instance based on whether the model score for the positive class exceeds a threshold chosen based on the application requirements (e.g., maximizing recall for a precision bound). However, model scores are often not aligned with the true positivity rate. This is especially true when the training involves a differential sampling across classes or there is distributional drift between train and test settings. In this paper, we provide theoretical analysis and empirical evidence of the dependence of model score estimation bias on both uncertainty and score itself. Further, we formulate the decision boundary selection in terms of both model score and uncertainty, prove that it is NP-hard, and present algorithms based on dynamic programming and isotonic regression. Evaluation of the proposed algorithms on three real-world datasets yield 25%-40% gain in recall at high precision bounds over the traditional approach of using model score alone, highlighting the benefits of leveraging uncertainty.

Local Friendliness (LF) inequalities follow from seemingly reasonable assumptions about reality: (i) ``absoluteness of observed events'' (e.g., every observed event happens for all observers) and (ii) ``local agency'' (e.g., free choices can be made uncorrelated with other events outside their future light cone). Extended Wigner's Friend Scenario (EWFS) thought experiments show that textbook quantum mechanics violates these inequalities. Thus, experimental evidence of these violations would make these two assumptions incompatible. In [Nature Physics 16, 1199 (2020)], the authors experimentally implemented an EWFS, using a photonic qubit to play the role of each of the ``friends'' and measured violations of LF. One may question whether a photonic qubit is a physical system that counts as an ``observer'' and thereby question whether the experiment's outcome is significant. Intending to measure increasingly meaningful violations, we propose using a statistical measure called the ``branch factor'' to quantify the ``observerness'' of the system. We then encode the EWFS as a quantum circuit such that the components of the circuit that define the friend are quantum systems of increasing branch factor. We run this circuit on quantum simulators and hardware devices, observing LF violations as the system sizes scale. As errors in quantum computers reduce the significance of the violations, better quantum computers can produce better violations. Our results extend the state of the art in proof-of-concept experimental violations from branch factor 0.0 to branch factor 16.0. This is an initial result in an experimental program for measuring LF violations at increasingly meaningful branch factors using increasingly more powerful quantum processors and networks. We introduce this program as a fundamental science application for near-term and developing quantum technology.

Deep learning research for binary analysis faces a critical infrastructure gap. Today, existing datasets target single platforms, require specialized tooling, or provide only hand-engineered features incompatible with modern neural architectures; no single dataset supports accessible research and pedagogy on realistic use cases. To solve this, we introduce Binary-30K, the first heterogeneous binary dataset designed for sequence-based models like transformers. Critically, Binary-30K covers Windows, Linux, macOS, and Android across 15+ CPU architectures. With 29,793 binaries and approximately 26.93% malware representation, Binary-30K enables research on platform-invariant detection, cross-target transfer learning, and long-context binary understanding. The dataset provides pre-computed byte-level BPE tokenization alongside comprehensive structural metadata, supporting both sequence modeling and structure-aware approaches. Platform-first stratified sampling ensures representative coverage across operating systems and architectures, while distribution via Hugging Face with official train/validation/test splits enables reproducible benchmarking. The dataset is publicly available at https://huggingface.co/datasets/mjbommar/binary-30k, providing an accessible resource for researchers, practitioners, and students alike.

We identify the Spectral Energy Gain in extreme model compression, where low-rank binary approximations outperform tiny-rank floating-point baselines for heavy-tailed spectra. However, prior attempts fail to realize this potential, trailing state-of-the-art 1-bit methods. We attribute this degradation to Latent Geometry Misalignment: standard singular vectors exhibit high coherence (spiky distribution), the worst-case geometry for binary quantization. To realize this gain, we propose LittleBit-2, a framework employing Internal Latent Rotation and Joint Iterative Quantization (Joint-ITQ). This approach acts as a geometric preconditioner, aligning coherent latent distributions with the binary hypercube with zero inference overhead. Empirically, LittleBit-2 establishes a new state-of-the-art in the sub-1-bit regime (1sim0.1 bpp) on Llama-2 and Llama-3, matching the fidelity of leading 1-bit baselines.

In fault-tolerant quantum computing with the surface code, non-Clifford gates are crucial for universal computation. However, implementing these gates using methods like magic state distillation and code switching requires significant resources. In this work, we propose a new protocol that combines magic state preparation and code switching to realize logical non-Clifford operations with the potential for fault tolerance. Our approach begins with a special logical state in the Z_4 surface code. By applying a sequence of transformations, the system goes through different topological codes, including the non-Abelian D_4 quantum double model. This process ultimately produces a magic state in a condensed Z_2 surface code, which enables the implementation of a logical T gate in the standard Z_2 surface code. In our analysis, we employ a framework where the topological codes are represented by their topological orders and all the transformations are considered as topological manipulations such as gauging symmetries and condensing anyons. This perspective is particularly useful for understanding code switching between topological codes.

We present the quark weak-mixing component of a Froggatt--Nielsen program, with one flavon and three messengers, in which a single hierarchy parameter B (with εequiv 1/B) and a rational-exponent ``B-lattice'' organize fermion Yukawa textures. Building on companion mass-fit work, we translate the lattice into sharp predictions for quark mixing. The four-magnitude parameterization serves as a practical interface between the flavon Yukawa textures and quark weak mixing observables, yielding coefficient-free ratio tests of the lattice structure.

Quantum computation is inherently hybrid, and fast classical manipulation of qubit operators is necessary to ensure scalability in quantum software. We introduce PauliEngine, a high-performance C++ framework that provides efficient primitives for Pauli string multiplication, commutators, symbolic phase tracking, and structural transformations. Built on a binary symplectic representation and optimized bit-wise operations, PauliEngine supports both numerical and symbolic coefficients and is accessible through a Python interface. Runtime benchmarks demonstrate substantial speedups over state-of-the-art implementations. PauliEngine provides a scalable backend for operator-based quantum software tools and simulations.

The decays of pseudoscalar mesons to real and virtual photons as well as neutrino-antineutrino pairs are considered in the framework of the dispersive method based on Anomaly Sum Rules. The contribution of singlet channel involving the new non-perturbative gluon form factor of virtual photon B(q^2) is systematically taken into account. The detailed analysis of its dependence on photon virtuality q^2 relying on the available data for meson transition fomfactors is performed. It is shown that B has quite a nontrivial structure at q^2 sim 1 GeV^2 which may be a signal of the existence of pseudoscalar glueball with a mass about 1.5-2 GeV. The calculation of the decay to νbar ν pairs leads to the compatibility with the result of Arnellos, Marciano and Parsa of 1982, when pion decay is considered neglecting the mixing effects. The account for these effects results, however, in the enhancement of pion branching ratio by a factor of 3, while that for eta decay is larger by several orders of magnitude. It is stressed, that dependence on the pair invariant mass is entirely defined by QCD and coincides with that of the meson transition form factor. The role of obtained results for the physics at HHaS detector at HIAF is discussed.

We introduce fusion-based quantum computing (FBQC) - a model of universal quantum computation in which entangling measurements, called fusions, are performed on the qubits of small constant-sized entangled resource states. We introduce a stabilizer formalism for analyzing fault tolerance and computation in these schemes. This framework naturally captures the error structure that arises in certain physical systems for quantum computing, such as photonics. FBQC can offer significant architectural simplifications, enabling hardware made up of many identical modules, requiring an extremely low depth of operations on each physical qubit and reducing classical processing requirements. We present two pedagogical examples of fault-tolerant schemes constructed in this framework and numerically evaluate their threshold under a hardware agnostic fusion error model including both erasure and Pauli error. We also study an error model of linear optical quantum computing with probabilistic fusion and photon loss. In FBQC the non-determinism of fusion is directly dealt with by the quantum error correction protocol, along with other errors. We find that tailoring the fault-tolerance framework to the physical system allows the scheme to have a higher threshold than schemes reported in literature. We present a ballistic scheme which can tolerate a 10.4% probability of suffering photon loss in each fusion.

We study the quantum coherence and its distribution of N-partite GHZ and W states of bosonic fields in the noninertial frames with arbitrary number of acceleration observers. We find that the coherence of both GHZ and W state reduces with accelerations and freezes in the limit of infinite accelerations. The freezing value of coherence depends on the number of accelerated observers. The coherence of N-partite GHZ state is genuinely global and no coherence exists in any subsystems. For the N-partite W state, however, the coherence is essentially bipartite types, and the total coherence is equal to the sum of coherence of all the bipartite subsystems.

We present here self-consistent zoom-in simulations of massive galaxies forming in a full cosmological setting. The simulations are run with an updated version of the KETJU code, which is able to resolve the gravitational dynamics of their supermassive black holes, while simultaneously modelling the large-scale astrophysical processes in the surrounding galaxies, such as gas cooling, star formation and stellar and AGN feedback. The KETJU code is able to accurately model the complex behaviour of multiple SMBHs, including dynamical friction, stellar scattering and gravitational wave emission, and also to resolve Lidov-Kozai oscillations that naturally occur in hierarchical triplet SMBH systems. In general most of the SMBH binaries form at moderately high eccentricities, with typical values in the range of e =0.6-0.95, meaning that the circular binary models that are commonly used in the literature are insufficient for capturing the typical binary evolution.

This preliminary white paper proposes a novel 8-bit floating-point data format HiFloat8 (abbreviated as HiF8) for deep learning. HiF8 features tapered precision. For normal value encoding, it provides 7 exponent values with 3-bit mantissa, 8 exponent values with 2-bit mantissa, and 16 exponent values with 1-bit mantissa. For denormal value encoding, it extends the dynamic range by 7 extra powers of 2, from 31 to 38 binades (notice that FP16 covers 40 binades). Meanwhile, HiF8 encodes all the special values except that positive zero and negative zero are represented by only one bit-pattern. Thanks to the better balance between precision and dynamic range, HiF8 can be simultaneously used in both forward and backward passes of AI training. In this paper, we will describe the definition and rounding methods of HiF8, as well as the tentative training and inference solutions. To demonstrate the efficacy of HiF8, massive simulation results on various neural networks, including traditional neural networks and large language models (LLMs), will also be presented.

Recently, binary representation has been proposed as a novel representation that lies between continuous and discrete representations. It exhibits considerable information-preserving capability when being used to replace continuous input vectors. In this paper, we investigate the feasibility of further introducing it to the output side, aiming to allow models to output binary labels instead. To preserve the structural information on the output side along with label information, we extend the previous contrastive hashing method as structured contrastive hashing. More specifically, we upgrade CKY from label-level to bit-level, define a new similarity function with span marginal probabilities, and introduce a novel contrastive loss function with a carefully designed instance selection strategy. Our model achieves competitive performance on various structured prediction tasks, and demonstrates that binary representation can be considered a novel representation that further bridges the gap between the continuous nature of deep learning and the discrete intrinsic property of natural languages.

This is an essay in what might be called ``mathematical metaphysics.'' There is a fundamental duality that run through mathematics and the natural sciences. The duality starts as the logical level; it is represented by the Boolean logic of subsets and the logic of partitions since subsets and partitions are category-theoretic dual concepts. In more basic terms, it starts with the duality between the elements (Its) of subsets and the distinctions (Dits, i.e., ordered pairs of elements in different blocks) of a partition. Mathematically, the Its & Dits duality is fully developed in category theory as the reverse-the-arrows duality. The quantitative versions of subsets and partitions are developed as probability theory and information theory (based on logical entropy). Classical physics was based on a view of reality as definite all the way down. In contrast, quantum physics embodies (objective) indefiniteness. And finally, there are the two fundamental dual mechanisms at work in biology, the selectionist mechanism and the generative mechanism, two mechanisms that embody the fundamental duality.

In this work, we investigate hot, isentropic compact stars in the limiting cases of static and maximally rotating configurations, focusing on how variations in the symmetry energy of the equation of state derived from covariant density functional theory affect stellar properties. We consider both nucleonic and hyperonic matter with systematically varied symmetry energy slopes, fixed entropies per baryon s / k_B=1 and 3, and electron fractions Y_e=0.1 and Y_e=0.4, representative of conditions in binary neutron star mergers and proto-neutron stars. We compute and analyze mass--radius and moment--of--inertia--mass relations, as well as the dependence of the Keplerian (mass-shedding) frequency on mass, angular momentum, and the ratio of kinetic to gravitational energy. Furthermore, we show that several universal relations between global properties remain valid across both nucleonic and hyperonic equations of state with varying symmetry energy, both in the static and Keplerian limit, and for various combinations of the fixed entropy and electron fraction.

Traditional deep learning often overlooks bytes, the basic units of the digital world, where all forms of information and operations are encoded and manipulated in binary format. Inspired by the success of next token prediction in natural language processing, we introduce bGPT, a model with next byte prediction to simulate the digital world. bGPT matches specialized models in performance across various modalities, including text, audio, and images, and offers new possibilities for predicting, simulating, and diagnosing algorithm or hardware behaviour. It has almost flawlessly replicated the process of converting symbolic music data, achieving a low error rate of 0.0011 bits per byte in converting ABC notation to MIDI format. In addition, bGPT demonstrates exceptional capabilities in simulating CPU behaviour, with an accuracy exceeding 99.99% in executing various operations. Leveraging next byte prediction, models like bGPT can directly learn from vast binary data, effectively simulating the intricate patterns of the digital world.

We present the analytic evaluation of the gravitational energy and of the angular momentum flux with tidal effects for inspiraling compact binaries, at next-to-next-to-leading post-Newtoian (2PN) order, within the effective field theory diagrammatic approach. We first compute the stress-energy tensor for a binary system, that requires the evaluation of two-point Feynman integrals, up to two loops. Then, we extract the multipole moments of the system, which we present for generic orbits in center-of-mass coordinates, and which are needed for the evaluation of the total gravitational energy and the angular momentum flux, for generic orbits. Finally, we provide the expression of gauge invariant quantities such as the fluxes, and the mode amplitudes and phase of the emitted gravitational wave, for circular orbits. Our findings are useful to update earlier theoretical studies as well as related phenomenological analyses, and waveform models

Binary black holes are one of the important sources for the TianQin gravitational wave project. Our research has revealed that, for TianQin, the signal-to-noise ratio of inspiral binary black holes can be computed analytically. This finding is expected to greatly simplify the estimation of detection capabilities for binary black holes. In this paper, we demonstrated the signal-to-noise ratio relationships from stellar-mass black holes to massive black holes. With the all-sky average condition, the signal-to-noise ratio for most binary black hole signals can be determined with a relative error of lesssim10%, with notable deviations only for chirp masses near 1000~M_odot. In contrast, the signal-to-noise ratio without the average includes an additional term, which we refer to as the response factor. Although this term is not easily calculated analytically, we provide a straightforward estimation method with an error margin of 1sigma within 2\%.

This paper proposes a new metric to measure the calibration error of probabilistic binary classifiers, called test-based calibration error (TCE). TCE incorporates a novel loss function based on a statistical test to examine the extent to which model predictions differ from probabilities estimated from data. It offers (i) a clear interpretation, (ii) a consistent scale that is unaffected by class imbalance, and (iii) an enhanced visual representation with repect to the standard reliability diagram. In addition, we introduce an optimality criterion for the binning procedure of calibration error metrics based on a minimal estimation error of the empirical probabilities. We provide a novel computational algorithm for optimal bins under bin-size constraints. We demonstrate properties of TCE through a range of experiments, including multiple real-world imbalanced datasets and ImageNet 1000.

Many people have flipped coins but few have stopped to ponder the statistical and physical intricacies of the process. We collected 350{,}757 coin flips to test the counterintuitive prediction from a physics model of human coin tossing developed by Diaconis, Holmes, and Montgomery (DHM; 2007). The model asserts that when people flip an ordinary coin, it tends to land on the same side it started -- DHM estimated the probability of a same-side outcome to be about 51\%. Our data lend strong support to this precise prediction: the coins landed on the same side more often than not, Pr(same side) = 0.508, 95\% credible interval (CI) [0.506, 0.509], BF_{same-side bias} = 2359. Furthermore, the data revealed considerable between-people variation in the degree of this same-side bias. Our data also confirmed the generic prediction that when people flip an ordinary coin -- with the initial side-up randomly determined -- it is equally likely to land heads or tails: Pr(heads) = 0.500, 95\% CI [0.498, 0.502], BF_{heads-tails bias} = 0.182. Furthermore, this lack of heads-tails bias does not appear to vary across coins. Additional analyses revealed that the within-people same-side bias decreased as more coins were flipped, an effect that is consistent with the possibility that practice makes people flip coins in a less wobbly fashion. Our data therefore provide strong evidence that when some (but not all) people flip a fair coin, it tends to land on the same side it started.

The Omega numbers-the halting probabilities of universal prefix-free machines-are known to be exactly the Martin-L{\"o}f random left-c.e. reals. We show that one cannot uniformly produce, from a Martin-L{\"o}f random left-c.e. real alpha, a universal prefix-free machine U whose halting probability is alpha. We also answer a question of Barmpalias and Lewis-Pye by showing that given a left-c.e. real alpha, one cannot uniformly produce a left-c.e. real beta such that alpha -- beta is neither left-c.e. nor right-c.e.

Contemporary machine learning models, such as language models, are powerful, but come with immense resource requirements both at training and inference time. It has been shown that decoder-only language models can be trained to a competitive state with ternary weights (1.58 bits per weight), facilitating efficient inference. Here, we start our exploration with non-transformer model architectures, investigating 1.58-bit training for multi-layer perceptrons and graph neural networks. Then, we explore 1.58-bit training in other transformer-based language models, namely encoder-only and encoder-decoder models. Our results show that in all of these settings, 1.58-bit training is on par with or sometimes even better than the standard 32/16-bit models.

We theoretically investigate the phase sensitivity with parity detection on an SU(1,1) interferometer with a coherent state combined with a squeezed vacuum state. This interferometer is formed with two parametric amplifiers for beam splitting and recombination instead of beam splitters. We show that the sensitivity of estimation phase approaches Heisenberg limit and give the corresponding optimal condition. Moreover, we derive the quantum Cram\'er-Rao bound of the SU(1,1) interferometer.

A new information theoretic condition is presented for reconstructing a discrete random variable X based on the knowledge of a set of discrete functions of X. The reconstruction condition is derived from Shannon's 1953 lattice theory with two entropic metrics of Shannon and Rajski. Because such a theoretical material is relatively unknown and appears quite dispersed in different references, we first provide a synthetic description (with complete proofs) of its concepts, such as total, common and complementary informations. Definitions and properties of the two entropic metrics are also fully detailed and shown compatible with the lattice structure. A new geometric interpretation of such a lattice structure is then investigated that leads to a necessary (and sometimes sufficient) condition for reconstructing the discrete random variable X given a set { X_1,ldots,X_{n} } of elements in the lattice generated by X. Finally, this condition is illustrated in five specific examples of perfect reconstruction problems: reconstruction of a symmetric random variable from the knowledge of its sign and absolute value, reconstruction of a word from a set of linear combinations, reconstruction of an integer from its prime signature (fundamental theorem of arithmetic) and from its remainders modulo a set of coprime integers (Chinese remainder theorem), and reconstruction of the sorting permutation of a list from a minimal set of pairwise comparisons.

Color codes are promising alternatives to surface codes for universal fault-tolerant quantum computing due to their simpler lattice-surgery protocols and the transversal implementation of logical Clifford gates. However, their practical deployment has been limited by slower decoding algorithms and worse logical failure rates and thresholds compared to surface codes. Although AI-based logical-flip decoders have recently been proposed to address these challenges, no clear framework currently exists for implementing such decoders within the parallel block-wise decoding schemes in both space and time required for large-scale fault-tolerant computation. AI-based pre-decoders offer a scalable alternative due to their local nature. By performing spacelike corrections on physical qubits and timelike corrections on stabilizer measurements, pre-decoders are naturally compatible with parallel block-wise decoding schemes and lattice-surgery protocols. In this work, we introduce AI-based pre-decoders for triangular color codes. We present a novel neural-network architecture for their implementation and develop methods to simplify the complex training data generated by color-code syndrome-extraction circuits containing feedforward operations. Remarkably, we find that both logical failure rates (LERs) and runtimes improve relative to raw Chromobius decoding as the code distance increases. For example, at code distance d=31 and physical error rate p=0.3%, our pre-decoder + Chromobius pipeline improves the logical failure rate by a factor of 347x while reducing runtime by 7.33x compared to raw Chromobius decoding alone. These results demonstrate that AI-based pre-decoding can substantially narrow the performance gap between color codes and surface codes, bringing color codes closer to practical large-scale fault-tolerant quantum computation.

As soon as abstract mathematical computations were adapted to computation on digital computers, the problem of efficient representation, manipulation, and communication of the numerical values in those computations arose. Strongly related to the problem of numerical representation is the problem of quantization: in what manner should a set of continuous real-valued numbers be distributed over a fixed discrete set of numbers to minimize the number of bits required and also to maximize the accuracy of the attendant computations? This perennial problem of quantization is particularly relevant whenever memory and/or computational resources are severely restricted, and it has come to the forefront in recent years due to the remarkable performance of Neural Network models in computer vision, natural language processing, and related areas. Moving from floating-point representations to low-precision fixed integer values represented in four bits or less holds the potential to reduce the memory footprint and latency by a factor of 16x; and, in fact, reductions of 4x to 8x are often realized in practice in these applications. Thus, it is not surprising that quantization has emerged recently as an important and very active sub-area of research in the efficient implementation of computations associated with Neural Networks. In this article, we survey approaches to the problem of quantizing the numerical values in deep Neural Network computations, covering the advantages/disadvantages of current methods. With this survey and its organization, we hope to have presented a useful snapshot of the current research in quantization for Neural Networks and to have given an intelligent organization to ease the evaluation of future research in this area.

We give a simple, fully correct, and assumption-light replacement for the contested "domain-extension" in Step 9 of a recent windowed-QFT lattice algorithm with complex-Gaussian windows~chen2024quantum. The published Step~9 suffers from a periodicity/support mismatch. We present a pair-shift difference construction that coherently cancels all unknown offsets, produces an exact uniform CRT-coset state over Z_{P}, and then uses the QFT to enforce the intended modular linear relation. The unitary is reversible, uses poly(log M_2) gates, and preserves the algorithm's asymptotics. Project Page: https://github.com/yifanzhang-pro/quantum-lattice.

We present a decomposition technique that uses non-deterministic circuits to approximate an arbitrary single-qubit unitary to within distance ε and requires significantly fewer non-Clifford gates than existing techniques. We develop "Repeat-Until-Success" (RUS) circuits and characterize unitaries that can be exactly represented as an RUS circuit. Our RUS circuits operate by conditioning on a given measurement outcome and using only a small number of non-Clifford gates and ancilla qubits. We construct an algorithm based on RUS circuits that approximates an arbitrary single-qubit Z-axis rotation to within distance ε, where the number of T gates scales as 1.26log_2(1/ε) - 3.53, an improvement of roughly three-fold over state-of-the-art techniques. We then extend our algorithm and show that a scaling of 2.4log_2(1/ε) - 3.28 can be achieved for arbitrary unitaries and a small range of ε, which is roughly twice as good as optimal deterministic decomposition methods.

Disassembly is a crucial yet challenging step in binary analysis. While emerging neural disassemblers show promise for efficiency and accuracy, they frequently generate outputs violating fundamental structural constraints, which significantly compromise their practical usability. To address this critical problem, we regularize the disassembly solution space by formalizing and applying key structural constraints based on post-dominance relations. This approach systematically detects widespread errors in existing neural disassemblers' outputs. These errors often originate from models' limited context modeling and instruction-level decoding that neglect global structural integrity. We introduce Tady, a novel neural disassembler featuring an improved model architecture and a dedicated post-processing algorithm, specifically engineered to address these deficiencies. Comprehensive evaluations on diverse binaries demonstrate that Tady effectively eliminates structural constraint violations and functions with high efficiency, while maintaining instruction-level accuracy.

Security experts reverse engineer (decompile) binary code to identify critical security vulnerabilities. The limited access to source code in vital systems - such as firmware, drivers, and proprietary software used in Critical Infrastructures (CI) - makes this analysis even more crucial on the binary level. Even with available source code, a semantic gap persists after compilation between the source and the binary code executed by the processor. This gap may hinder the detection of vulnerabilities in source code. That being said, current research on Large Language Models (LLMs) overlooks the significance of decompiled binaries in this area by focusing solely on source code. In this work, we are the first to empirically uncover the substantial semantic limitations of state-of-the-art LLMs when it comes to analyzing vulnerabilities in decompiled binaries, largely due to the absence of relevant datasets. To bridge the gap, we introduce DeBinVul, a novel decompiled binary code vulnerability dataset. Our dataset is multi-architecture and multi-optimization, focusing on C/C++ due to their wide usage in CI and association with numerous vulnerabilities. Specifically, we curate 150,872 samples of vulnerable and non-vulnerable decompiled binary code for the task of (i) identifying; (ii) classifying; (iii) describing vulnerabilities; and (iv) recovering function names in the domain of decompiled binaries. Subsequently, we fine-tune state-of-the-art LLMs using DeBinVul and report on a performance increase of 19%, 24%, and 21% in the capabilities of CodeLlama, Llama3, and CodeGen2 respectively, in detecting binary code vulnerabilities. Additionally, using DeBinVul, we report a high performance of 80-90% on the vulnerability classification task. Furthermore, we report improved performance in function name recovery and vulnerability description tasks.

We develop a method for training neural networks on Boolean data in which the values at all nodes are strictly pm 1, and the resulting models are typically equivalent to networks whose nonzero weights are also pm 1. The method replaces loss minimization with a nonconvex constraint formulation. Each node implements a Boolean threshold function (BTF), and training is expressed through a divide-and-concur decomposition into two complementary constraints: one enforces local BTF consistency between inputs, weights, and output; the other imposes architectural concurrence, equating neuron outputs with downstream inputs and enforcing weight equality across training-data instantiations of the network. The reflect-reflect-relax (RRR) projection algorithm is used to reconcile these constraints. Each BTF constraint includes a lower bound on the margin. When this bound is sufficiently large, the learned representations are provably sparse and equivalent to networks composed of simple logical gates with pm 1 weights. Across a range of tasks -- including multiplier-circuit discovery, binary autoencoding, logic-network inference, and cellular automata learning -- the method achieves exact solutions or strong generalization in regimes where standard gradient-based methods struggle. These results demonstrate that projection-based constraint satisfaction provides a viable and conceptually distinct foundation for learning in discrete neural systems, with implications for interpretability and efficient inference.

Red supergiants (RSGs), as the descendants of OB-type stars and the progenitors of supernovae, provide crucial insights into the evolution of massive stars, particularly in binary systems. Previous studies show that the binary fraction of RSGs (approx 15% - 40%) is significantly lower than that of their predecessors (approx 50% - 70%). In this work, we investigate the binary fraction of RSGs with the recently selected largest samples of 4695 and 2097 RSGs in the Large Magellanic Cloud (LMC) and Small Magellanic Cloud (SMC), respectively. The binary system with a hot companion (O-, B- and A-type star) is identified by detecting the ultraviolet (UV) excess in the observed spectral energy distribution (SED) ranging from ultraviolet to mid-infrared after subtracting the model SED of RSG since RSGs are very weak in the UV band. It is found that the lower limit of binarity is 30.2% pm 0.7% and 32.2% pm 1% in the LMC and SMC, respectively. If the sample is limited to luminous RSGs with log L/L_{odot} > 4.0, the binary fraction becomes 26.6% pm 1.1% and 26.4% pm 1.7% in the LMC and SMC, respectively. The derived binary fraction is valid in the range of sim 2.3 < log P / [d] < sim 8. Our study suggests that roughly one-third of massive stars host a third companion within sim 30,000 AU. In addition, 15 RSGs are also identified as binary via HST/STIS spectra, and a handful of the binaries identified by the SED fitting are confirmed by their light curve and radial velocity dispersion. The stellar parameters of the companions, i.e. T_{eff}, R, L and log g, are calculated by model fitting.

Ternary weight quantization (e.g., BitNet b1.58) offers a promising path to mitigate the memory bandwidth bottleneck in Large Language Model (LLM) inference. However, conventional compute platforms lack native support for ternary-weight arithmetic, often relying on inefficient dequantization. Lookup table (LUT)-based hardware architectures provide an effective alternative by replacing multiplications with conditional additions, but their design space remains largely unexplored. Existing designs rely on heuristic parameter selection, lacking a systematic understanding of the architectural trade-offs. This work addresses this gap by formalizing the design space of ternary LUT-based accelerators and presenting an open-source hardware generator coupled with an analytical cost model, validated against synthesis in TSMC 16nm technology. By spanning the full architectural space, this framework not only enables rapid design space exploration but also establishes a common footing for fair cross-design evaluation, which was previously hindered by inconsistent instantiations across published accelerators. Using this framework, we challenge several assumptions and design choices in recent literature. We demonstrate that the optimal architecture is fundamentally governed by the activation data type: while LUT-based reuse offers significant gains for high-cost arithmetic (e.g., FP16), it yields diminishing returns for small integer types. Furthermore, we show that maximizing core size consistently improves area density compared to highly tiled approaches. Our optimized designs achieve a 2.2x area reduction compared to multiplier-based baselines. Moreover, by benchmarking state-of-the-art implementations against our model, we reveal that correcting suboptimal parameters yields up to a 1.2x area improvement.

Error correction allows a quantum computer to preserve states long beyond the decoherence time of its physical qubits. Key to any scheme of error correction is the decoding algorithm, which estimates the error state of qubits from the results of syndrome measurements. The leading proposal for quantum error correction, the surface code, has fast and accurate decoders, but several recently proposed quantum low-density parity check (qLDPC) codes allow more logical information to be encoded in significantly fewer physical qubits. The state-of-the-art decoder for general qLDPC codes, BP-OSD, has a cheap Belief Propagation stage, followed by linear algebra and search stages which can each be slow in practice. We introduce the Ambiguity Clustering decoder (AC) which, after the Belief Propagation stage, divides the measurement data into clusters that can be decoded independently. We benchmark AC on the recently proposed bivariate bicycle qLDPC codes and find that, with 0.3% circuit-level depolarising noise, AC is up to 27x faster than BP-OSD with matched accuracy. Our implementation of AC decodes the 144-qubit Gross code in 135us per round of syndrome extraction on an M2 CPU, already fast enough to keep up with neutral atom and trapped ion systems.

The peculiar long gamma-ray burst (GRB) event, GRB 211211A, is known for it is association with a kilonova feature. Whereas most long GRBs are thought to originate in the core collapse of massive stars, the presence of kilonova suggests GRB 211211A was instead produced by a merger of a compact object binary. Building on the interpretation put forward by Yang2022Natur.612..232Y--who argue that GRB 211211A was powered by a massive white-dwarf + neutron-star (WD-NS) merger--we adopt this WD-NS scenario as our observationally supported starting point. If the burst truly originates from that channel, its rarity must mirror the formation and merger rate of WD-NS binaries--a rate still largely unexplored in conventional massive-binary population studies. In this letter, we present a qualitative analysis based on binary evolution physics in order to understand the fraction of GRB 211211A in short GRBs (NS-WD/NS-NS fraction). Since the progenitors of massive WD-NS binaries occupy the initial mass function-preferred regime, where the zero-age main-sequence mass range of the assumed WD mass range (1.2-1.4,M_odot) is comparable to that of NSs, the NS-WD/NS-NS fraction emerging from our standard evolutionary path is expected to be sim14--37\%, far higher than the observed fraction (sim5\%). This discrepancy might imply a large, still-unidentified population of GRB 211211A-like events or an unusual origin of the NS-such as being hypernova-born or accretion-induced-collapse-born. Placing these results in a broader compact-binary context, implications for black-hole systems are also discussed.

The phase evolution of gravitational waves encodes critical information about the orbital dynamics of binary systems. In this work, we test the robustness of parameterized tests against unmodeled deviations from general relativity. We demonstrate that these parameterized tests are flexible and sensitive in detecting generic deviations in the waveform using the Cutler-Vallisneri bias formalism. This universality arises from examining the inherent geometry of the waveform signal and understanding how biases manifest. We show how Bayes factors are governed by the intrinsic geometry of the waveform signal manifold when parameterized tests are used to approximate generic violations of GR. We use the singular value decomposition to propose templates that are orthogonal to parameterized tests, identifying degeneracies and enhancing the detection of potential deviations. More broadly, the geometric framework developed here clarifies -- at a fundamental level -- how subtle waveform effects (including orbital eccentricity, spin precession, waveform systematics, and instrumental glitches) can mimic one another in data, and when they are intrinsically distinguishable.

We propose a simple modification of space-based gravitational wave (GW) detector optical benches which would enable the measurement of vacuum birefringence of light induced by axion dark matterthrough its coupling to electromagnetism. Specifically, we propose to change a half-wave plate by a circular polarizer. While marginally affecting the sensitivity to GW by a factor 2, we show that such an adjustment would make future detectors such as LISA, TianQin, Taiji and Big-Bang Observer the most sensitive experiments at low axion masses

We present CART (Context-Anchored Recurrent Transformer), a parameter-efficient language model that reuses a single shared core block R times across depth. Unlike prior looped transformers that recompute key-value tensors at every iteration, CART computes K and V once from a multi-layer prelude and has the recurrent core cross-attend to those frozen tensors via multi-head latent attention. A learned Linear Time-Invariant (LTI) gate keeps the recurrence stable: its spectral radius settles in a narrow band (rho in [0.79, 0.83]) across all 36 fully-trained configurations. We evaluate CART on single consumer GPUs in two stages: a 64-configuration screen at 3,000 steps, then 36 configurations (P=6, R in {6,8,10}, three seeds) trained for 30,500 steps (~1B tokens). Two patterns hold across widths d in {256,512,768,1024}: prelude depth P dominates loop count R, and the Stage-1 ranking of R reverses at full training (R=6 becomes best at d>=512). At the binding d=1024 parameter-parity test, CART does not beat a parameter-matched dense baseline, losing by 1-2% at stored-parameter parity and by ~10% at effective-parameter parity. Diagnostic ablations split the effective-parameter gap into ~5% from weight sharing and a residual ~5% from the heterogeneous prelude/anchor/core/coda framing; the recurrent-core machinery (hyper-connections, LTI gate, loop-index embedding) is individually vestigial. Variable-R inference degrades on both sides of the trained R, a negative result for test-time depth scaling under this recipe.

The singlet-doublet vector-like fermion dark matter model has been extensively studied in the literature over the past decade. An important parameter in this model is the singlet-doublet mixing angle (sintheta). All the previous studies have primarily focused on annihilation and co-annihilation processes for obtaining the correct dark matter relic density, assuming that the singlet and doublet components decouple at the same epoch. In this work, we demonstrate that this assumption holds only for larger mixing angles with a dependency on the mass of the dark matter. However, it badly fails for the mixing angle sintheta<0.05. We present a systematic study of the parameter space of the singlet-doublet dark matter relic, incorporating annihilation, co-annihilation, and, for the first time, co-scattering processes. Additionally, the freeze-in parameter space is also explored. We found that due to the inclusion of co-scattering processes, the correct relic density parameter space is shifted towards the detection sensitivity range of the LHC and MATHUSLA via displaced vertex signatures.

The Pleiades is the most prominent open star cluster visible from Earth and an important benchmark for simple stellar populations, unified by common origin, age, and distance. Binary stars are its essential ingredient, yet their contribution remains uncertain due to heavy observational biases. A resolved multiplicity survey was conducted for a magnitude-limited G < 15mag sample of 423 potential cluster members, including sources with poorly fitted astrometric solutions in Gaia DR3. Speckle interferometric observations at the 2.5 meter telescope of SAI MSU observatory were combined with Gaia data, enabling the identification of 61 resolved binary or multiple systems within the 0.04 - 10 arcsec (5 - 1350 au) separation range. With speckle observations, we discovered 21 components in 20 systems. The existence of a Merope (23 Tau) companion is confirmed after several previous unsuccessful attempts. We show that the Gaia multipeak fraction is a strong predictor of subarcsecond multiplicity, as all sources with ipd_frac_multi_peak > 4% are successfully resolved. We found that 10% of Pleiades stars have a companion with a mass ratio q > 0.5 within projected separation of 27 < s < 1350 au, and confirm a deficit of wide binaries with s > 300 au. An observed dearth of wide pairs with large mass ratio (q > 0.55) may imprint the transition from hard to soft binaries regime at the early stages of cluster evolution. The total binary fraction for q > 0.5 systems is extrapolated to be around 25%.

Deploying Large Language Models (LLMs) on resource-constrained edge devices faces critical bottlenecks in memory bandwidth and power consumption. While ternary quantization (e.g., BitNet b1.58) significantly reduces model size, its direct deployment on general-purpose hardware is hindered by workload imbalance, bandwidth-bound decoding, and strict data dependencies. To address these challenges, we propose VitaLLM, a hardware-software co-designed accelerator tailored for efficient ternary LLM inference. We introduce a heterogeneous Dual-Core Compute Strategy that synergizes specialized TINT-Cores for massive ternary projections with a unified BoothFlex-Core for mixed-precision attention, ensuring high utilization across both compute-bound prefill and bandwidth-bound decode stages. Furthermore, we develop a Leading One Prediction (LOP) mechanism to prune redundant Key-Value (KV) cache fetches and a Dependency-Aware Scheduling framework to hide the latency of nonlinear operations. Implemented in TSMC 16nm technology, VitaLLM achieves a decoding throughput of 70.70 tokens/s within an ultra-compact area of 0.223 mm^2 and a power consumption of 65.97 mW. The design delivers a superior Figure of Merit (FOM) of 17.4 TOPS/mm^2/W, significantly outperforming state-of-the-art accelerators. Finally, we explore an extended bit-serial design (BoothFlex-BS) to demonstrate the architecture's adaptability for precision-agile inference.

The hull of a linear code C is the intersection of C with its dual code. We present and analyze the number of linear q-ary codes of the same length and dimension but with different dimensions for their hulls. We prove that for given dimension k and length nge 2k the number of all [n,k]_q linear codes with hull dimension l decreases as l increases. We also present classification results for binary and ternary linear codes with trivial hulls (LCD and self-orthogonal) for some values of the length n and dimension k, comparing the obtained numbers with the number of all linear codes for the given n and k.

We present an experimental implementation of the multiplayer Quantum Volunteer's Dilemma on noisy intermediate-scale quantum (NISQ) hardware, executed on the ibm_kingston backend via Qiskit Runtime. The game is evaluated for N = 2 to 9 players under four transpiler optimization levels, with 20 independent repetitions per configuration and 2048 shots per circuit, including post-processing readout error correction via mthree. Target-state fidelity decays with system size but remains above 70% (corrected) through N = 9. With readout correction, the global average payoff reproduces the quantum theoretical benchmark exactly for N <= 6 and exceeds the classical Nash equilibrium across the full tested range. Optimization level 2 is selected as the reference configuration after gate count analysis reveals that levels 2 and 3 produce identical transpiled circuits, with level 2 achieving superior fidelity stability. A Hamming distance analysis of raw measurement counts shows that single-qubit errors dominate at small N, with multi-qubit contributions growing beyond N = 6. A calibration-based digital twin captures global payoff trends but exhibits a linear fidelity decay profile that diverges from the hardware behavior at large N, exposing the limits of first-order independent per-qubit noise models. These results demonstrate that aggregate quantum advantage in multiplayer games is robust to NISQ noise conditions across the full tested range, while the practical observability of state-level advantage is constrained to N <= 8 under post-processed readout correction.

Binary code similarity detection (BCSD) has important applications in various fields such as vulnerability detection, software component analysis, and reverse engineering. Recent studies have shown that deep neural networks (DNNs) can comprehend instructions or control-flow graphs (CFG) of binary code and support BCSD. In this study, we propose a novel Transformer-based approach, namely jTrans, to learn representations of binary code. It is the first solution that embeds control flow information of binary code into Transformer-based language models, by using a novel jump-aware representation of the analyzed binaries and a newly-designed pre-training task. Additionally, we release to the community a newly-created large dataset of binaries, BinaryCorp, which is the most diverse to date. Evaluation results show that jTrans outperforms state-of-the-art (SOTA) approaches on this more challenging dataset by 30.5% (i.e., from 32.0% to 62.5%). In a real-world task of known vulnerability searching, jTrans achieves a recall that is 2X higher than existing SOTA baselines.

Binary code is pervasive, and binary analysis is a key task in reverse engineering, malware classification, and vulnerability discovery. Unfortunately, while there exist large corpuses of malicious binaries, obtaining high-quality corpuses of benign binaries for modern systems has proven challenging (e.g., due to licensing issues). Consequently, machine learning based pipelines for binary analysis utilize either costly commercial corpuses (e.g., VirusTotal) or open-source binaries (e.g., coreutils) available in limited quantities. To address these issues, we present Assemblage: an extensible cloud-based distributed system that crawls, configures, and builds Windows PE binaries to obtain high-quality binary corpuses suitable for training state-of-the-art models in binary analysis. We have run Assemblage on AWS over the past year, producing 890k Windows PE and 428k Linux ELF binaries across 29 configurations. Assemblage is designed to be both reproducible and extensible, enabling users to publish "recipes" for their datasets, and facilitating the extraction of a wide array of features. We evaluated Assemblage by using its data to train modern learning-based pipelines for compiler provenance and binary function similarity. Our results illustrate the practical need for robust corpuses of high-quality Windows PE binaries in training modern learning-based binary analyses. Assemblage can be downloaded from https://assemblage-dataset.net

Gross, Mansour, and Tucker introduced the partial-duality polynomial of a ribbon graph [Distributions, European J. Combin. 86, 1--20, 2020], the generating function enumerating partial duals by the Euler genus. Chmutov and Vignes-Tourneret wondered if this polynomial and its conjectured properties would hold for general delta-matroids, which are combinatorial abstractions of ribbon graphs. Yan and Jin contributed to this inquiry by identifying a subset of delta-matroids-specifically, even normal binary ones-whose twist polynomials are characterized by a singular term. Building upon this foundation, the current paper expands the scope of the investigation to encompass even non-binary delta-matroids, revealing that none of them have width-changing twists.

FP8 is a natural progression for accelerating deep learning training inference beyond the 16-bit formats common in modern processors. In this paper we propose an 8-bit floating point (FP8) binary interchange format consisting of two encodings - E4M3 (4-bit exponent and 3-bit mantissa) and E5M2 (5-bit exponent and 2-bit mantissa). While E5M2 follows IEEE 754 conventions for representatio of special values, E4M3's dynamic range is extended by not representing infinities and having only one mantissa bit-pattern for NaNs. We demonstrate the efficacy of the FP8 format on a variety of image and language tasks, effectively matching the result quality achieved by 16-bit training sessions. Our study covers the main modern neural network architectures - CNNs, RNNs, and Transformer-based models, leaving all the hyperparameters unchanged from the 16-bit baseline training sessions. Our training experiments include large, up to 175B parameter, language models. We also examine FP8 post-training-quantization of language models trained using 16-bit formats that resisted fixed point int8 quantization.

We show that the Hong-Ou-Mandel effect from quantum optics is equivalent to the SWAP test, a quantum information primitive which compares two arbitrary states. We first derive a destructive SWAP test that doesn't need the ancillary qubit that appears in the usual quantum circuit. Then, we study the Hong-Ou-Mandel effect for two photons meeting at a beam splitter and prove it is, in fact, an optical implementation of the destructive SWAP test. This result offers both an interesting simple realization of a powerful quantum information primitive and an alternative way to understand and analyse the Hong-Ou-Mandel effect.

Reciprocity is a fundamental symmetry present in many natural phenomena and engineered systems. Distinct situations where this symmetry is broken are typically grouped under the umbrella term "nonreciprocity", colloquially defined by: the action of A on B neq the action of B on A. In this review, we elucidate what nonreciprocity is by providing an introduction to its most salient classes: nonvariational dynamics, violations of Newton's third law, broken detailed balance, nonreciprocal responses and nonreciprocity of arbitrary linear operators. Next, we point out where to find these manifestations of non-reciprocity, from ensembles of particles with field mediated interactions to synthetic neural networks and open quantum systems. Given this breadth of contexts and the lack of an all-encompassing definition, it makes it all the more intriguing that some general conclusions can be gathered, when distinct definitions of nonreciprocity overlap. We explore what these universal consequences are with a special emphasis on collective phenomena that arise in nonreciprocal many-body systems. The topics covered include nonreciprocal phase transitions and non-normal amplification of noise and perturbations. We conclude with some open questions.

We consider a fair division model in which agents have positive, zero and negative utilities for items. For this model, we analyse one existing fairness property - EFX - and three new and related properties - EFX_0, EFX^3 and EF1^3 - in combination with Pareto-optimality. With general utilities, we give a modified version of an existing algorithm for computing an EF1^3 allocation. With -alpha/0/alpha utilities, this algorithm returns an EFX^3 and PO allocation. With absolute identical utilities, we give a new algorithm for an EFX and PO allocation. With -alpha/0/beta utilities, this algorithm also returns such an allocation. We report some new impossibility results as well.

We describe an analysis comparing the pp elastic cross section as measured by the D0 Collaboration at a center-of-mass energy of 1.96 TeV to that in pp collisions as measured by the TOTEM Collaboration at 2.76, 7, 8, and 13 TeV using a model-independent approach. The TOTEM cross sections extrapolated to a center-of-mass energy of s = 1.96 TeV are compared with the D0 measurement in the region of the diffractive minimum and the second maximum of the pp cross section. The two data sets disagree at the 3.4σ level and thus provide evidence for the t-channel exchange of a colorless, C-odd gluonic compound, also known as the odderon. We combine these results with a TOTEM analysis of the same C-odd exchange based on the total cross section and the ratio of the real to imaginary parts of the forward elastic scattering amplitude in pp scattering. The combined significance of these results is larger than 5σ and is interpreted as the first observation of the exchange of a colorless, C-odd gluonic compound.

This is the 1st part of the dissertation for my master degree and compares the power consumption using the default floating point (32bit) and Nvidia mixed precision (16bit and 32bit) while training a classification ML model. A custom PC with specific hardware was built to perform the experiments, and different ML hyper-parameters, such as batch size, neurons, and epochs, were chosen to build Deep Neural Networks (DNN). Additionally, various software was used during the experiments to collect the power consumption data in Watts from the Graphics Processing Unit (GPU), Central Processing Unit (CPU), Random Access Memory (RAM) and manually from a wattmeter connected to the wall. A benchmarking test with default hyper parameter values for the DNN was used as a reference, while the experiments used a combination of different settings. The results were recorded in Excel, and descriptive statistics were chosen to calculate the mean between the groups and compare them using graphs and tables. The outcome was positive when using mixed precision combined with specific hyper-parameters. Compared to the benchmarking, the optimisation for the classification reduced the power consumption between 7 and 11 Watts. Similarly, the carbon footprint is reduced because the calculation uses the same power consumption data. Still, a consideration is required when configuring hyper-parameters because it can negatively affect hardware performance. However, this research required inferential statistics, specifically ANOVA and T-test, to compare the relationship between the means. Furthermore, tests indicated no statistical significance of the relationship between the benchmarking and experiments. However, a more extensive implementation with a cluster of GPUs can increase the sample size significantly, as it is an essential factor and can change the outcome of the statistical analysis.

We calculate the motion of binary mass systems in gravity up to the sixth post--Newtonian order to the G_N^3 terms ab initio using momentum expansions within an effective field theory approach based on Feynman amplitudes in harmonic coordinates. For these contributions we construct a canonical transformation to isotropic and to EOB coordinates at 5PN and agree with the results in the literature Bern:2019nnu,Damour:2019lcq. At 6PN we compare to the Hamiltonians in isotropic coordinates either given in Bern:2019nnu or resulting from the scattering angle. We find a canonical transformation from our Hamiltonian in harmonic coordinates to Bern:2019nnu, but not to Damour:2019lcq. This implies that we also agree on all observables with Bern:2019nnu to the sixth post--Newtonian order to G_N^3.