Daily Papers

End-to-end full-page document parsing must preserve the content and structure of heterogeneous elements, yet otherwise accurate outputs can contain local errors and omissions. A single page-level advantage does not explicitly identify which elements differ in quality across sampled outputs or where their errors occur. We introduce Page-to-Token Policy Optimization (P2TPO), a structure-aligned credit-assignment framework that operates on full-page policy trajectories. Reference-element alignment first associates block-level quality contrasts with generated spans. Unified Anchor Pricing (UAP) incorporates matched and missing element outcomes and provides feedback relative to a fixed quality ceiling when sampled outputs receive identical but imperfect scores for a reference element. Within matched blocks, Span Credit Redistribution (SCR) redistributes existing block credit according to aligned correct and erroneous spans, using boundary proxies for within-block omissions while preserving the total block-derived advantage across its tokens. Under a fixed-weight additive page utility, we show that element-indexed contrasts retain local quality differences that page-level aggregation can cancel out. In the main experimental comparison, P2TPO outperforms all evaluated policy optimization baselines in seed-averaged scores on each of the six document parsing benchmarks. Additional experiments demonstrate gains across model scales and initializations.

Group Relative Policy Optimization (GRPO) assigns a single scalar advantage to all tokens in a completion. For structured generations with explicit segments and objectives, this couples unrelated reward signals across segments, leading to objective interference and misattributed credit. We propose Blockwise Advantage Estimation, a family of GRPO-compatible methods that assigns each objective its own advantage and applies it only to the tokens in the corresponding text block, reducing reliance on hand-designed scalar rewards and scaling naturally to additional objectives. A key challenge is estimating advantages for later blocks whose rewards are conditioned on sampled prefixes; standard unbiased approaches require expensive nested rollouts from intermediate states. Concretely, we introduce an Outcome-Conditioned Baseline that approximates intermediate state values using only within-group statistics by stratifying samples according to a prefix-derived intermediate outcome. On math tasks with uncertainty estimation, our method mitigates reward interference, is competitive with a state-of-the-art reward-designed approach, and preserves test-time gains from confidence-weighted ensembling. More broadly, it provides a modular recipe for optimizing sequential objectives in structured generations without additional rollouts.

Reinforcement learning (RL) has recently become the core paradigm for aligning and strengthening large language models (LLMs). Yet, applying RL in off-policy settings--where stale data from past policies are used for training--improves sample efficiency, but remains challenging: policy entropy declines sharply, optimization often becomes unstable and may even collapse. Through theoretical and empirical analysis, we identify two key insights: (i) an imbalance in optimization, where negative-advantage samples dominate the policy gradient, suppressing useful behaviors and risking gradient explosions; and (ii) the derived Entropy-Clip Rule, which reveals that the fixed clipping mechanism in PPO-like objectives systematically blocks entropy-increasing updates, thereby driving the policy toward over-exploitation at the expense of exploration. Building on these insights, we propose BAlanced Policy Optimization with Adaptive Clipping (BAPO), a simple yet effective method that dynamically adjusts clipping bounds to adaptively re-balance positive and negative contributions, preserve entropy, and stabilize RL optimization. Across diverse off-policy scenarios--including sample replay and partial rollout--BAPO achieves fast, stable, and data-efficient training. On AIME 2024 and AIME 2025 benchmarks, our 7B BAPO model surpasses open-source counterparts such as SkyWork-OR1-7B, while our 32B BAPO model not only achieves state-of-the-art results among models of the same scale but also outperforms leading proprietary systems like o3-mini and Gemini-2.5-Flash-Thinking.

Diffusion large language models (dLLMs) have emerged as a promising alternative for text generation, distinguished by their native support for parallel decoding. In practice, block inference is crucial for avoiding order misalignment in global bidirectional decoding and improving output quality. However, the widely-used fixed, predefined block (naive) schedule is agnostic to semantic difficulty, making it a suboptimal strategy for both quality and efficiency: it can force premature commitments to uncertain positions while delaying easy positions near block boundaries. In this work, we analyze the limitations of naive block scheduling and disclose the importance of dynamically adapting the schedule to semantic difficulty for reliable and efficient inference. Motivated by this, we propose Dynamic Sliding Block (DSB), a training-free block scheduling method that uses a sliding block with a dynamic size to overcome the rigidity of the naive block. To further improve efficiency, we introduce DSB Cache, a training-free KV-cache mechanism tailored to DSB. Extensive experiments across multiple models and benchmarks demonstrate that DSB, together with DSB Cache, consistently improves both generation quality and inference efficiency for dLLMs. Code is released at https://github.com/lizhuo-luo/DSB.

Generating long-form content, such as minute-long videos and extended texts, is increasingly important for modern generative models. Block diffusion improves inference efficiency via KV caching and block-wise causal inference and has been widely adopted in diffusion language models and video generation. However, in long-context settings, block diffusion still incurs substantial overhead from repeatedly computing attention over a growing KV cache. We identify an underexplored property of block diffusion: cross-step redundancy of attention within a block. Our analysis shows that attention outputs from tokens outside the current block remain largely stable across diffusion steps, while block-internal attention varies significantly. Based on this observation, we propose FlashBlock, a cached block-external attention mechanism that reuses stable attention output, reducing attention computation and KV cache access without modifying the diffusion process. Moreover, FlashBlock is orthogonal to sparse attention and can be combined as a complementary residual reuse strategy, substantially improving model accuracy under aggressive sparsification. Experiments on diffusion language models and video generation demonstrate up to 1.44times higher token throughput and up to 1.6times reduction in attention time, with negligible impact on generation quality. Project page: https://caesarhhh.github.io/FlashBlock/.

Large language models (LLMs) excel at generation but dominant autoregressive (AR) decoding is inherently sequential, creating a throughput bottleneck. Diffusion Language Models (DLMs)--especially block-wise variants--enable parallel generation and intra-block bidirectional reasoning, yet training large DLMs from scratch is costly and wastes the knowledge in mature AR checkpoints. Prior "adaptation" attempts either modify logits or randomly grow attention masks to full-sequence diffusion, or simply transplant AR weights into a block-diffusion recipe, leaving a fundamental mismatch between AR causality and block-wise bidirectionality unaddressed. We reframe adaptation as a intra-paradigm path from AR to Block-Diffusion by viewing AR as Block-Diffusion with blocksize=1. Concretely, we design the pathway of adaptation as follows: we use a context-causal attention mask (causal in context, bidirectional only within the active block), an efficient parallel adaptation procedure, an auxiliary AR loss to maximize data utilization and retain pretrained knowledge, and gradual increment of the generation block size. The recipe integrates cleanly with masked block-diffusion and maintains train-inference consistency. Built on these components, NBDiff-7B (Base and Instruct) could inherit the long-context modeling and reasoning capabilities, and achieve state-of-the-art performance among the 7B-class DLMs, delivering strong gains on general-knowledge, math, and code benchmarks over strong baselines. These results demonstrate that principled AR-to-block-diffusion adaptation is an effective and compute-efficient alternative to training DLMs from scratch. Codes: https://github.com/YuchuanTian/NBDiff.

Speculative decoding accelerates inference by using a lightweight draft model to generate candidate tokens in parallel, and are then verified by the target model, enabling lossless acceleration. Recently, diffusion-based speculative decoding further improves parallelism by generating multiple tokens per forward pass via block-level diffusion, achieving state-of-the-art (SOTA) performance. However, existing methods adopt a fixed inference block size and assume a uniform optimal decoding strategy across all inputs. In this paper, we show that this assumption is suboptimal, as the optimal block size varies across samples and plays a critical role in speculative decoding performance. Moreover, these values exhibit a clear local structure, concentrating around the training block size, which reduces the problem to a low-dimensional and structured decision space. Based on these insights, we propose BlockPilot, a sample-adaptive policy that predicts the optimal block size from the prefilling representation. Specifically, we formulate block size selection as a lightweight policy learning problem and propose an instance-adaptive decision mechanism that predicts the optimal block size based on the representation of the prefilling stage. The prediction is performed only once after prefilling, allowing for seamless integration. Extensive experiments demonstrate that our method is plug-and-play, introduces minimal overhead, and consistently improves efficiency, achieving an acceptance length of 5.92 and a 4.20times speedup on Qwen3-4B under temperature T=1.

Block diffusion accelerates speculative decoding by drafting multiple tokens in one forward pass. However, each position predicts a marginal distribution without observing earlier proposed tokens, limiting draft quality and acceptance length. We identify a concrete failure, the repetition trap, in which neighboring positions produce redundant copies of the same token. We explain this tendency theoretically and empirically examine its association with shorter accepted drafts. Recent methods refine marginal predictions with an additional causal head or a separately trained drafter, increasing parameter storage and introducing separate training objectives. We instead propose D-Loop, which introduces intra-block causal conditioning within the original diffusion drafter without additional model components. Inspired by semi-autoregressive generation and parameter sharing, D-Loop reuses the same backbone across looped passes. The first pass proposes a block, and the second conditions on a selected prefix to regenerate the suffix in parallel. A complementary prefix--suffix objective trains the shared drafter for both anchor-only prefix prediction and prefix-conditioned suffix prediction. Across eight math, code, and chat benchmarks, D-Loop can beat DFlash and DSpark on Qwen3-4B and Qwen3-8B with obvious gains.

Block coordinate descent (BCD) methods are widely used for large-scale numerical optimization because of their cheap iteration costs, low memory requirements, amenability to parallelization, and ability to exploit problem structure. Three main algorithmic choices influence the performance of BCD methods: the block partitioning strategy, the block selection rule, and the block update rule. In this paper we explore all three of these building blocks and propose variations for each that can significantly improve the progress made by each BCD iteration. We (i) propose new greedy block-selection strategies that guarantee more progress per iteration than the Gauss-Southwell rule; (ii) explore practical issues like how to implement the new rules when using "variable" blocks; (iii) explore the use of message-passing to compute matrix or Newton updates efficiently on huge blocks for problems with sparse dependencies between variables; and (iv) consider optimal active manifold identification, which leads to bounds on the "active-set complexity" of BCD methods and leads to superlinear convergence for certain problems with sparse solutions (and in some cases finite termination at an optimal solution). We support all of our findings with numerical results for the classic machine learning problems of least squares, logistic regression, multi-class logistic regression, label propagation, and L1-regularization.

Training large neural networks with end-to-end backpropagation creates significant memory bottlenecks, limiting accessibility to state-of-the-art AI research. We propose DiffusionBlocks, a novel training framework that interprets neural network blocks as performing denoising operations in a continuous-time diffusion process. By partitioning the network into independently trainable blocks and optimizing noise level assignments based on equal cumulative probability mass, our approach achieves significant memory efficiency while maintaining competitive performance compared to traditional backpropagation in generative tasks. Experiments on image generation and language modeling tasks demonstrate memory reduction proportional to the number of blocks while achieving superior performance. DiffusionBlocks provides a promising pathway for democratizing access to large-scale neural network training with limited computational resources.

Block attention, which processes the input as separate blocks that cannot attend to one another, offers significant potential to improve KV cache reuse in long-context scenarios such as Retrieval-Augmented Generation (RAG). However, its broader application is hindered by two key challenges: the difficulty of segmenting input text into meaningful, self-contained blocks, and the inefficiency of existing block fine-tuning methods that risk degrading performance. To address these, we first construct SemanticSeg, a large and diverse semantic segmentation dataset containing over 30k instances across 16 categories-including books, code, web text, and conversations with text lengths ranging from 2k to 32k. Using this dataset, we train a lightweight segmenter to automatically partition text into human-instinct-aligned blocks with controllable granularity. Second, we propose block distillation, a training framework that is more efficient than block fine-tuning, which uses a frozen full-attention teacher model to guide the block-attention student. This framework integrates three novel components: block sink tokens to mitigate information loss at block boundaries, block dropout to leverage training signals from all blocks, and token-level loss weighting to focus learning on block-attention-sensitive tokens. Experiments across multiple models and benchmarks demonstrate that our segmenter outperforms heuristic and statistical baselines, and block distillation achieves near-full-attention performance under block attention, establishing a practical and scalable pathway for deploying block attention.

Is the uniform-state diffusion framework a more powerful paradigm for discrete diffusion? Recent studies indicate that this may be the case. In combination with predictor-corrector samplers, uniform-state diffusion models (USDMs) produce samples of higher-quality than masked diffusion models (MDMs), and USDMs equal or outperform MDMs in downstream tasks, even though they exhibit greater perplexity. Two issues remain unresolved. First, existing work compares uniform and masked diffusion with un-informed correctors that re-inject noise at random positions, rather than targeting tokens most likely to be wrong. Second, prior work compares full-sequence diffusion models, so we do not know whether the same conclusion holds when tokens are generated block by block. To address these issues, we introduce BlockGen, a blockwise sequence model that we instantiate with both masked and uniform diffusion. BlockGen trains on a mixture of block sizes and its likelihood interpolates between AR and pure diffusion more finely than models with a fixed block size. BlockGen enables AR-informed predictor-corrector sampling (ARPC), which combines AR and diffusion predictions to re-generate unlikely tokens without an auxiliary verifier. Under ancestral sampling, uniform outperforms masked in the block-by-block setting, especially in the few-step regime. Under ARPC, the gap closes and reverses at high NFE. With block size 16 on GSM8K, MDMs reach slightly higher accuracy than USDMs, and we observe a similar trend in Generative Perplexity on OpenWebText. Find our code at https://github.com/jdeschena/blockgen.

Block diffusion language models (BDLMs) combine autoregressive dependencies across blocks with parallel denoising within blocks, but long-context training is constrained by distributed attention communication and activation memory. Conventional context parallelism (CP) shards the combined clean-plus-corrupted sequence by position, communicating shared clean K/V together with block-specific corrupted K/V and their gradients. We observe that the BDLM objective separates over target blocks. We introduce block parallelism (BP), a new distributed parallelism dimension that assigns each corrupted-block computation to one rank. To scale BP to long contexts, we introduce context-sharded block parallelism (CSBP), which also shards the shared clean sequence across those ranks. CSBP keeps corrupted K/V and gradients local, avoids replicated clean prefixes, and preserves BDLM training semantics. On 16 H200 GPUs at 256K context, CSBP improves throughput over the best baseline by 1.18-1.45x for supervised fine-tuning and 1.27-1.33x for conversion of autoregressive models to BDLMs, while matching or reducing peak HBM. Full-model speedup reaches 1.61x at 512K. On eight H100 GPUs, CSBP accelerates DFlash2 speculative-decoder training by 2.48x at 512K and 7.59x at 1M. In matched 12-hour DiffusionGemma 26B-A4B SFT runs, CSBP achieves higher pass rates at every trained checkpoint on SWE-bench Verified and Terminal-Bench Lite. Code: https://github.com/ScalingIntelligence/Turbo-dLLM

We introduce Block-Attention, an attention mechanism designed to address the increased inference latency and cost in Retrieval-Augmented Generation (RAG) scenarios. Traditional approaches often encode the entire context. Instead, Block-Attention divides retrieved documents into discrete blocks, with each block independently calculating key-value (KV) states except for the final block. In RAG scenarios, by defining each passage as a block, Block-Attention enables us to reuse the KV states of passages that have been seen before, thereby significantly reducing the latency and the computation overhead during inference. The implementation of Block-Attention involves block segmentation, position re-encoding, and fine-tuning the LLM to adapt to the Block-Attention mechanism. Experiments on four RAG benchmarks demonstrate that after block fine-tuning, the Block-Attention model achieves performance comparable to self-attention models (68.4\% vs 67.9\% on Llama3) or even superior performance (62.8\% vs 59.6\% on Mistral). Notably, Block-Attention significantly reduces the time to first token (TTFT) and floating point operations (FLOPs) to a very low level. It only takes 45 ms to output the first token for an input sequence with a total length of 32K. Compared to the self-attention models, the time consumption and corresponding FLOPs are reduced by 98.7\% and 99.8\%, respectively.

We present BlockFusion, a diffusion-based model that generates 3D scenes as unit blocks and seamlessly incorporates new blocks to extend the scene. BlockFusion is trained using datasets of 3D blocks that are randomly cropped from complete 3D scene meshes. Through per-block fitting, all training blocks are converted into the hybrid neural fields: with a tri-plane containing the geometry features, followed by a Multi-layer Perceptron (MLP) for decoding the signed distance values. A variational auto-encoder is employed to compress the tri-planes into the latent tri-plane space, on which the denoising diffusion process is performed. Diffusion applied to the latent representations allows for high-quality and diverse 3D scene generation. To expand a scene during generation, one needs only to append empty blocks to overlap with the current scene and extrapolate existing latent tri-planes to populate new blocks. The extrapolation is done by conditioning the generation process with the feature samples from the overlapping tri-planes during the denoising iterations. Latent tri-plane extrapolation produces semantically and geometrically meaningful transitions that harmoniously blend with the existing scene. A 2D layout conditioning mechanism is used to control the placement and arrangement of scene elements. Experimental results indicate that BlockFusion is capable of generating diverse, geometrically consistent and unbounded large 3D scenes with unprecedented high-quality shapes in both indoor and outdoor scenarios.

Discrete diffusion models have steadily improved in quality relative to autoregressive (AR) models. However, these models are normally constrained to fixed-length generation and do not support key-value (KV) caching. Block diffusion partially bridges diffusion and AR by generating token blocks left-to-right, but its fixed-size sequential blocks limit decoding flexibility and parallelism. Here, we present a new class of language models, set diffusion, comprised of (i) a likelihood parameterization that factorizes over flexible-position, flexible-length token sets and (ii) a set-causal diffusion architecture that supports KV cache updates after every inference step. By factorizing over token sets instead of fixed-size blocks, tokens can be decoded in arbitrarily-ordered sets, including sliding-window sets, enabling faster inference and support for any-order decoding. Set diffusion achieves better speed-quality tradeoffs on mathematical reasoning, summarization, and unconditional generation compared to prior diffusion language models while offering stronger infilling performance than block diffusion. We provide the code, along with the model weights and blog post on the project page: https://m-arriola.com/setdlms/

Block-causal video generation faces a stark speed-quality trade-off: small 1.3B models manage only 16 FPS while large 14B models crawl at 4.5 FPS, forcing users to choose between responsiveness and quality. Block Cascading significantly mitigates this trade-off through training-free parallelization. Our key insight: future video blocks do not need fully denoised current blocks to begin generation. By starting block generation with partially denoised context from predecessors, we transform sequential pipelines into parallel cascades where multiple blocks denoise simultaneously. With 5 GPUs exploiting temporal parallelism, we achieve ~2x acceleration across all model scales: 1.3B models accelerate from 16 to 30 FPS, 14B models from 4.5 to 12.5 FPS. Beyond inference speed, Block Cascading eliminates overhead from KV-recaching (of ~200ms) during context switches for interactive generation. Extensive evaluations validated against multiple block-causal pipelines demonstrate no significant loss in generation quality when switching from block-causal to Block Cascading pipelines for inference. Project Page: https://hmrishavbandy.github.io/block_cascading_page/

Video diffusion transformers generate high-quality videos, but the quadratic cost of 3D full attention dominates their inference. Dynamic block-sparse attention reduces this cost by computing exact attention only on key/value blocks selected from current activations. However, its fidelity degrades under aggressive sparsity: blocks are scored from coarse summaries or formed by costly global clustering, pruned blocks vanish from the softmax, and whole tiles are kept or dropped even when only a few of their keys matter. To address these limitations, we propose Accurate Block Attention (AB-Attention), a training-free method that accurately approximates dense attention at high sparsity. Its Intra-Block Clustering Selector (IBCS) estimates block importance faithfully yet cheaply by clustering queries only within each query block, without permuting tokens. Sampling with Inclusion-Probability Weighting (SIP) then samples blocks in proportion to these estimates and reweights them by inverse inclusion probability, so that one pass estimates dense attention rather than truncating it. Finally, its kernel gathers key/value blocks much smaller than a tile into full tensor-core tiles, refining selection at no extra tensor-core cost. On Wan2.1 and HunyuanVideo, AB-Attention skips 89--92\% of attention, whereas the baselines compute 1.8--3.6times as much, yet it still improves PSNR by up to 4.4~dB over the strongest baseline and achieves up to 2.23times end-to-end speedup. Our code is available at https://github.com/InfRec-Cardinal/AB-Attention.

This paper presents Block, a distributed scheduling framework designed to optimize load balancing and auto-provisioning across instances in large language model serving frameworks by leveraging contextual information from incoming requests. Unlike popular model serving systems that rely on monolithic and heuristic task schedulers, Block operates as a fully distributed, stateless, and predictive scheduling system to achieve low overhead, reliability, and scalability. It leverages the deterministic and predictable characteristics of LLM inferences, such as host configurations, response lengths, and hardware performance, to make scheduling decisions based on accurately predicted metrics. Evaluation on a 12 GPUs cluster shows that Block significantly outperforms heuristic schedulers, boosting serving capacity by up to 16.7\% and reducing P99 tail latency by up to 49.5\%. These performance gains remain consistent across diverse models, workloads and configurations. Code and data are open-sourced.

Post-hoc gradient-based interpretability methods [Simonyan et al., 2013, Smilkov et al., 2017] that provide instance-specific explanations of model predictions are often based on assumption (A): magnitude of input gradients -- gradients of logits with respect to input -- noisily highlight discriminative task-relevant features. In this work, we test the validity of assumption (A) using a three-pronged approach. First, we develop an evaluation framework, DiffROAR, to test assumption (A) on four image classification benchmarks. Our results suggest that (i) input gradients of standard models (i.e., trained on original data) may grossly violate (A), whereas (ii) input gradients of adversarially robust models satisfy (A). Second, we introduce BlockMNIST, an MNIST-based semi-real dataset, that by design encodes a priori knowledge of discriminative features. Our analysis on BlockMNIST leverages this information to validate as well as characterize differences between input gradient attributions of standard and robust models. Finally, we theoretically prove that our empirical findings hold on a simplified version of the BlockMNIST dataset. Specifically, we prove that input gradients of standard one-hidden-layer MLPs trained on this dataset do not highlight instance-specific signal coordinates, thus grossly violating assumption (A). Our findings motivate the need to formalize and test common assumptions in interpretability in a falsifiable manner [Leavitt and Morcos, 2020]. We believe that the DiffROAR evaluation framework and BlockMNIST-based datasets can serve as sanity checks to audit instance-specific interpretability methods; code and data available at https://github.com/harshays/inputgradients.

While text-to-3D generation has advanced rapidly, achieving high geometric fidelity at low inference cost remains challenging. Existing text-to-3D methods either decode discrete shape tokens autoregressively or iteratively refine global 3D representations with diffusion or flow models. However, autoregressive decoding is sequential and cannot revise errors, whereas diffusion and flow-matching models repeatedly process the full representation, making high-quality generation increasingly expensive. In this paper, we propose Block3D, a block-wise diffusion framework that partitions the discrete shape-token sequence into contiguous blocks, generates the blocks autoregressively, and jointly denoises all tokens within the current block. To alleviate error accumulation, we introduce confidence-guided intra-block correction, which revises low-confidence tokens before each block is finalized. On a held-out set from TRELLIS-500K, Block3D reduces mean end-to-end generation time from 25.71 seconds to 4.99 seconds, achieving a 5.15times speedup over the fine-tuned autoregressive baseline without sacrificing geometric fidelity.

Recent advances in block diffusion language models have demonstrated competitive performance and strong scalability on reasoning tasks. However, existing BDLMs have limited exploration under the test-time scaling setting and face more severe decoding challenges in long Chain-of-Thought reasoning, particularly in balancing the decoding speed and effectiveness. In this work, we propose a unified framework for test-time scaling in BDLMs that introduces adaptivity in both decoding and block-wise generation. At the decoding level, we propose Bounded Adaptive Confidence Decoding (BACD), a difficulty-aware sampling strategy that dynamically adjusts denoising based on model confidence, accelerating inference while controlling error accumulation. Beyond step-wise adaptivity, we introduce Think Coarse, Critic Fine (TCCF), a test-time scaling paradigm that allocates large block sizes to exploratory reasoning and smaller block sizes to refinement, achieving an effective efficiency-effectiveness balance. To enable efficient and effective decoding with a large block size, we adopt Progressive Block Size Extension, which mitigates performance degradation when scaling block sizes. Extensive experiments show that applying BACD and TCCF to TDAR-8B yields significant improvements over strong baselines such as TraDo-8B (2.26x speedup, +11.2 points on AIME24). These results mark an important step toward unlocking the potential of BDLMs for test-time scaling in complex reasoning tasks.

Block drafters propose several tokens in one forward pass, before earlier target tokens are realised. Their rejection mixes two losses: missing within-block path information and imperfect modelling of observable information. Accepted length cannot distinguish them. We separate the two with an information floor, the minimum expected rejection at a specified conditioning order; rejection above this floor is the model gap. Estimating both from target rollouts across four domains, four open-weight targets, and a frontier API target yields three findings. First, the all-parallel floor reaches 0.286 at the final slot on Qwen3-4B, limiting even the best proposal to 71% per-slot acceptance. Second, one realised token removes 86--100% of this floor, a locality also recovered by an independent mutual-information analysis. Third, current drafters remain far above their floors: the final-slot model gap accounts for 43--64% of DFlash rejection and 85--92% of DSpark's oracle-conditioned rejection. These findings separate the value of short-range conditioning from proposal quality. Guided by this distinction, we replace a context-independent predecessor correction with a prefix-attention head that reads committed context conditional on the predecessor. With supporting backbone components, the resulting Qwen3-4B drafter improves mean serving accepted length by 3.83% over the released DSpark checkpoint across nine tasks, without increasing the conditioning order.

Scaling language models to long contexts is limited by the quadratic cost of self-attention. Block sparse attention offers an efficient alternative, but selecting the retained blocks remains a bottleneck. Conventional block selection requires scoring all query-block pairs and therefore remains quadratic in sequence length. To address this issue, we propose PISA, a block-sparse attention mechanism that employs a pyramid Top-K selection strategy. The main idea is to gradually narrow down the candidates across different levels, making it more efficient to find the most relevant keys. Specifically, we construct a coarse-to-fine hierarchy of keys and perform selection from the coarsest level. At each level, LogSumExp scoring is applied to a bounded candidate set to select candidates for the next finer level, continuing until the finest level is reached. Through pooling, we construct O(log N) levels of keys, yielding an overall complexity of O(Nlog N), where N denotes the sequence length. We develop hardware-aware Triton kernels for both training and inference, fusing hierarchical routing and LogSumExp scoring without materializing the query-key score matrix. We further evaluate our method on language modeling tasks. Compared with the baseline, our method achieves comparable performance on benchmarks such as commonsense reasoning while delivering better results on retrieval tasks.

One of the most compelling features of global discrete diffusion language models is their global bidirectional contextual capability. However, existing block-based diffusion studies tend to introduce autoregressive priors, which, while offering benefits, can cause models to lose this global coherence at the macro level. To regain global contextual understanding while preserving the advantages of the semi-autoregressive paradigm, we propose Diffusion in Diffusion, a 'draft-then-refine' framework designed to overcome the irreversibility and myopia problems inherent in block diffusion models. Our approach first employs block diffusion to generate rapid drafts using small blocks, then refines these drafts through global bidirectional diffusion with a larger bidirectional receptive field. We utilize snapshot confidence remasking to identify the most critical tokens that require modification, and apply mix-scale training to expand the block diffusion model's global capabilities. Empirical results demonstrate that our approach sets a new benchmark for discrete diffusion models on the OpenWebText dataset. Using only 26% of the fine-tuning budget of baseline models, we reduce generative perplexity from 25.7 to 21.9, significantly narrowing the performance gap with autoregressive models.

Speculative decoding accelerates autoregressive generation by drafting a block of tokens that the target model verifies left-to-right, committing only the longest accepted prefix. Block (DLM-style) drafters predict the whole block in parallel, which is fast but trained with a full-block cross-entropy that supervises every position against the gold continuation -- even though inference discards every token after the first rejection. Recent acceptance-aware objectives patch this by reweighting the full-block loss; we instead use teacher-forced learning as a motivation for how supervision should concentrate on the accepted prefix. A mask-only block drafter has no input-side channel for gold-prefix conditioning, so AUF approximates that prefix-sensitive supervision on the loss side by keeping the cross-entropy support only through the drafter's first predicted failure. AUF is a single, detached change to the CE support -- no auxiliary objective, no verifier rollouts, and no change to the inference pipeline or the exactness contract. Within fixed drafter backbones and serving settings on Qwen3-8B, AUF raises the DFlash drafter's average emitted length τ, averaged over six benchmarks, from 2.40 to 2.61, with a gain on every benchmark, and transfers to Domino's two-branch head (2.56 to 2.68). Two findings sharpen the picture: the decay-only baseline reaches higher token accuracy on the shared block mask yet decodes worse, and on DFlash, once AUF truncates the support, the standard exponential position-decay weighting becomes empirically inert.

Diffusion models have recently revolutionized the field of image synthesis due to their ability to generate photorealistic images. However, one of the major drawbacks of diffusion models is that the image generation process is costly. A large image-to-image network has to be applied many times to iteratively refine an image from random noise. While many recent works propose techniques to reduce the number of required steps, they generally treat the underlying denoising network as a black box. In this work, we investigate the behavior of the layers within the network and find that 1) the layers' output changes smoothly over time, 2) the layers show distinct patterns of change, and 3) the change from step to step is often very small. We hypothesize that many layer computations in the denoising network are redundant. Leveraging this, we introduce block caching, in which we reuse outputs from layer blocks of previous steps to speed up inference. Furthermore, we propose a technique to automatically determine caching schedules based on each block's changes over timesteps. In our experiments, we show through FID, human evaluation and qualitative analysis that Block Caching allows to generate images with higher visual quality at the same computational cost. We demonstrate this for different state-of-the-art models (LDM and EMU) and solvers (DDIM and DPM).

Diffusion language models offer unique benefits over autoregressive models due to their potential for parallelized generation and controllability, yet they lag in likelihood modeling and are limited to fixed-length generation. In this work, we introduce a class of block diffusion language models that interpolate between discrete denoising diffusion and autoregressive models. Block diffusion overcomes key limitations of both approaches by supporting flexible-length generation and improving inference efficiency with KV caching and parallel token sampling. We propose a recipe for building effective block diffusion models that includes an efficient training algorithm, estimators of gradient variance, and data-driven noise schedules to minimize the variance. Block diffusion sets a new state-of-the-art performance among diffusion models on language modeling benchmarks and enables generation of arbitrary-length sequences. We provide the code, along with the model weights and blog post on the project page: https://m-arriola.com/bd3lms/

Vision transformers have gained popularity recently, leading to the development of new vision backbones with improved features and consistent performance gains. However, these advancements are not solely attributable to novel feature transformation designs; certain benefits also arise from advanced network-level and block-level architectures. This paper aims to identify the real gains of popular convolution and attention operators through a detailed study. We find that the key difference among these feature transformation modules, such as attention or convolution, lies in their spatial feature aggregation approach, known as the "spatial token mixer" (STM). To facilitate an impartial comparison, we introduce a unified architecture to neutralize the impact of divergent network-level and block-level designs. Subsequently, various STMs are integrated into this unified framework for comprehensive comparative analysis. Our experiments on various tasks and an analysis of inductive bias show a significant performance boost due to advanced network-level and block-level designs, but performance differences persist among different STMs. Our detailed analysis also reveals various findings about different STMs, such as effective receptive fields and invariance tests. All models and codes used in this study are publicly available at https://github.com/OpenGVLab/STM-Evaluation.

Recent advances in reasoning with large language models (LLMs) have shown the effectiveness of Monte Carlo Tree Search (MCTS) for generating high-quality intermediate trajectories, particularly in math and symbolic domains. Inspired by this, we explore how MCTS-derived trajectories, traditionally used for training value or reward models, can be repurposed to improve policy optimization in preference-based reinforcement learning (RL). Specifically, we focus on Group Relative Policy Optimization (GRPO), a recent algorithm that enables preference-consistent policy learning without value networks. We propose a staged GRPO training paradigm where completions are derived from partially revealed MCTS rollouts, introducing a novel tree-structured setting for advantage estimation. This leads to a rich class of prefix-conditioned reward signals, which we analyze theoretically and empirically. Our initial results indicate that while structured advantage estimation can stabilize updates and better reflect compositional reasoning quality, challenges such as advantage saturation and reward signal collapse remain. We propose heuristic and statistical solutions to mitigate these issues and discuss open challenges for learning under staged or tree-like reward structures.

Large reasoning models (LRMs) aim to solve diverse and complex problems through structured reasoning. Recent advances in group-based policy optimization methods have shown promise in enabling stable advantage estimation without reliance on process-level annotations. However, these methods rely on advantage gaps induced by high-quality samples within the same batch, which makes the training process fragile and inefficient when intra-group advantages collapse under challenging tasks. To address these problems, we propose a reinforcement learning mechanism named \textbf{R^3} that along three directions: (1) a cross-context \underline{\textbf{R}eplay} strategy that maintains the intra-group advantage by recalling valuable examples from historical trajectories of the same query, (2) an in-context self-\underline{\textbf{R}eflection} mechanism enabling models to refine outputs by leveraging past failures, and (3) a structural entropy \underline{\textbf{R}anking reward}, which assigns relative rewards to truncated or failed samples by ranking responses based on token-level entropy patterns, capturing both local exploration and global stability. We implement our method on Deepseek-R1-Distill-Qwen-1.5B and train it on the DeepscaleR-40k in the math domain. Experiments demonstrate our method achieves SoTA performance on several math benchmarks, representing significant improvements and fewer reasoning tokens over the base models. Code and model will be released.

Speculative decoding accelerates LLM inference by having a small drafter propose tokens that a larger target model verifies in parallel. Recent diffusion-based parallel drafters such as DFlash predict the full B-token block in one forward pass, enabling deeper drafters and longer accepted blocks. However, existing multi-token drafter objectives often use fixed position-dependent weighting schedules, such as head-dependent weights or block-position decays, which do not adapt as the positions limiting acceptance change during training. To address this, we derive per-position training weights from a differentiable surrogate of expected accepted draft length, matching the weight of each position to its log-probability gradient contribution. The resulting loss, D-PACE (Dynamic Position-Aware Cross-Entropy), shifts training signal toward positions that currently limit acceptance as the drafter improves. Across six benchmarks, two Qwen3-4B draft depths, two decoding temperatures, and two additional target models, D-PACE consistently improves both wall-clock speedup and average emitted length, with 2.3\% measured training-time overhead and no changes to the drafter architecture or inference procedure.

Process reward models enable fine-grained, step-level evaluation of LLMs, yet building them for agentic settings remains prohibitively difficult: long-horizon interactions, irreversible actions, and stochastic environment feedback make both human annotation and Monte Carlo estimation infeasible at scale. In this work, we show that reinforcement learning (RL) post-training already provides the ingredients for effective step-level scoring, eliminating the need for dedicated reward model training altogether. Concretely, we derive an implicit advantage under a general stochastic Markov decision process, which we term progress advantage -- log-probability ratio between the RL-trained policy and its reference policy exactly recovers the optimal advantage function. This formulation makes the resulting signal annotation-free, domain-agnostic, and available as a byproduct of the standard RL post-training pipeline. We validate the effectiveness of the progress advantage across three different applications: test-time scaling, uncertainty quantification, and failure attribution on five benchmarks and four model families. Across all settings, it consistently outperforms confidence-based baselines and, despite requiring no task-specific training, surpasses dedicated trained reward models. We complement these results with deeper analyses on characteristics of progress advantage, offering practical guidance for adoption in real-world agentic systems.

Diffusion models have recently shown remarkable generation ability, achieving state-of-the-art performance in many tasks. However, the high computational cost is still a troubling problem for diffusion models. To tackle this problem, we propose to automatically remove the structural redundancy in diffusion models with our proposed Diffusion Distillation-based Block-wise Neural Architecture Search (DiffNAS). Specifically, given a larger pretrained teacher, we leverage DiffNAS to search for the smallest architecture which can achieve on-par or even better performance than the teacher. Considering current diffusion models are based on UNet which naturally has a block-wise structure, we perform neural architecture search independently in each block, which largely reduces the search space. Different from previous block-wise NAS methods, DiffNAS contains a block-wise local search strategy and a retraining strategy with a joint dynamic loss. Concretely, during the search process, we block-wisely select the best subnet to avoid the unfairness brought by the global search strategy used in previous works. When retraining the searched architecture, we adopt a dynamic joint loss to maintain the consistency between supernet training and subnet retraining, which also provides informative objectives for each block and shortens the paths of gradient propagation. We demonstrate this joint loss can effectively improve model performance. We also prove the necessity of the dynamic adjustment of this loss. The experiments show that our method can achieve significant computational reduction, especially on latent diffusion models with about 50\% MACs and Parameter reduction.

Reinforcement Learning (RL) for Large Language Models (LLMs) often suffers from training collapse in long-horizon tasks due to exploding gradient variance. To mitigate this, a baseline is commonly introduced for advantage computation; however, traditional value models remain difficult to optimize, and standard group-based baselines overlook sequence heterogeneity. Although classic optimal baseline theory can achieve global variance reduction, it neglects token heterogeneity and requires prohibitive gradient-based computation. In this work, we derive the Optimal Token Baseline (OTB) from first principles, proving that gradient updates should be weighted inversely to their cumulative gradient norm. To ensure efficiency, we propose the Logit-Gradient Proxy that approximates the gradient norm using only forward-pass probabilities. Our method achieves training stability and matches the performance of large group sizes (N=32) with only N=4, reducing token consumption by over 65% across single-turn and tool-integrated reasoning tasks.

Activation steering has emerged as a cost-effective paradigm for modifying large language model (LLM) behaviors. Existing methods typically intervene at the block level, steering the bundled activations of selected attention heads, feedforward networks, or residual streams. However, we reveal that block-level activations are inherently heterogeneous, entangling beneficial, irrelevant, and harmful features, thereby rendering block-level steering coarse, inefficient, and intrusive. To investigate the root cause, we decompose block activations into fine-grained atomic unit (AU)-level activations, where each AU-level activation corresponds to a single dimension of the block activation, and each AU denotes a slice of the block weight matrix. Steering an AU-level activation is thus equivalent to steering its associated AU. Our theoretical and empirical analysis show that heterogeneity arises because different AUs or dimensions control distinct token distributions in LLM outputs. Hence, block-level steering inevitably moves helpful and harmful token directions together, which reduces efficiency. Restricting intervention to beneficial AUs yields more precise and effective steering. Building on this insight, we propose AUSteer, a simple and efficient method that operates at a finer granularity of the AU level. AUSteer first identifies discriminative AUs globally by computing activation momenta on contrastive samples. It then assigns adaptive steering strengths tailored to diverse inputs and selected AU activations. Comprehensive experiments on multiple LLMs and tasks show that AUSteer consistently surpasses advanced baselines while steering considerably fewer activations, demonstrating that steering less achieves more.

Procedural Content Generation (PCG) algorithms enable the automatic generation of complex and diverse artifacts. However, they don't provide high-level control over the generated content and typically require domain expertise. In contrast, text-to-3D methods allow users to specify desired characteristics in natural language, offering a high amount of flexibility and expressivity. But unlike PCG, such approaches cannot guarantee functionality, which is crucial for certain applications like game design. In this paper, we present a method for generating functional 3D artifacts from free-form text prompts in the open-world game Minecraft. Our method, DreamCraft, trains quantized Neural Radiance Fields (NeRFs) to represent artifacts that, when viewed in-game, match given text descriptions. We find that DreamCraft produces more aligned in-game artifacts than a baseline that post-processes the output of an unconstrained NeRF. Thanks to the quantized representation of the environment, functional constraints can be integrated using specialized loss terms. We show how this can be leveraged to generate 3D structures that match a target distribution or obey certain adjacency rules over the block types. DreamCraft inherits a high degree of expressivity and controllability from the NeRF, while still being able to incorporate functional constraints through domain-specific objectives.

Statistical data fusion combines two panels that share a block of covariates but observe disjoint outcome blocks, and in its traditional form no row observes both outcomes at once. That rules out the discriminative criterion one would rather train a Deep Boltzmann Machine with, since multi-prediction training needs ground truth for whatever it holds out. We propose observed-block multi-prediction, which restricts the multi-prediction objective to targets drawn from what each row actually observes. It is well defined for any missingness pattern and reduces to the original criterion when rows are complete. Having a discriminative criterion that survives the setting lets us ask whether the joint model is needed at all, by separating what it contributes into a representation part and an inference part. On two consumer panels, on grids over sample size and covariate width spanning 35 cells and 875 runs, the fine-tuned DBM is the best of fifteen methods in every cell; but almost none of that advantage comes from generative pre-training, which is confined to the smallest sample size on one dataset and absent on the other. It comes from conditioning on one outcome block when predicting the other. This term amounts to +0.19 and +0.07 percentage points, is positive in all 35 cells, and, unlike every other contribution we measure, neither decays as the panels grow, nor requires a second hidden layer, nor requires more inference. Permuting one outcome block to destroy its association with the other removes the gain entirely, which is what the account predicts. The margins are small. But a small effect that does not decay is a different object from one that does, because it rests on evidence that no model mapping covariates to outcomes can accept.

Diffusion Policy has demonstrated strong visuomotor modeling capabilities, but its high computational cost renders it impractical for real-time robotic control. Despite huge redundancy across repetitive denoising steps, existing diffusion acceleration techniques fail to generalize to Diffusion Policy due to fundamental architectural and data divergences. In this paper, we propose Block-wise Adaptive Caching(BAC), a method to accelerate Diffusion Policy by caching intermediate action features. BAC achieves lossless action generation acceleration by adaptively updating and reusing cached features at the block level, based on a key observation that feature similarities vary non-uniformly across timesteps and locks. To operationalize this insight, we first propose the Adaptive Caching Scheduler, designed to identify optimal update timesteps by maximizing the global feature similarities between cached and skipped features. However, applying this scheduler for each block leads to signiffcant error surges due to the inter-block propagation of caching errors, particularly within Feed-Forward Network (FFN) blocks. To mitigate this issue, we develop the Bubbling Union Algorithm, which truncates these errors by updating the upstream blocks with signiffcant caching errors before downstream FFNs. As a training-free plugin, BAC is readily integrable with existing transformer-based Diffusion Policy and vision-language-action models. Extensive experiments on multiple robotic benchmarks demonstrate that BAC achieves up to 3x inference speedup for free.

The growing demand for Large Language Models (LLMs) across diverse applications has prompted a paradigm shift in the design of deep learning serving systems. Deploying LLMs, especially in multi-tenant environments, presents considerable challenges due to their high computational and memory demands. We present BlockLLM, a serving system that exploits the potential of sharing components among fine-tuned LLM models to offer an efficient and flexible solution for LLM workloads. BlockLLM partitions the models into finer-grained blocks to enable the reuse of model components and independent provisioning to improve the computation efficiency. BlockLLM consists of an offline block zoo, for storing the blocks, and an online system to serve the requests through chains of blocks. It offers multi-fold flexibility: (1) Adaptive assembly of block chains on-the-fly is achieved with the help of equivalence evaluation among blocks in the zoo. (2) We enable per-block batch size and configure best-effort KV cache coordination at individual block level. (3) We adopt speculative execution and locality-aware block placement to mitigate the communication costs from dynamic block resource allocation. Our evaluation demonstrates that BlockLLM reduces memory and storage footprints and improves computation efficiency, outperforming existing serving approach in 95\%ile latency and GPU utilization by 33.5\% and 20.1\%, respectively.

Large Language Models (LLMs) with chains-of-thought have demonstrated strong performance on an increasing range of tasks, particularly those involving complex logical reasoning. However, excessively long chains can lead to overthinking, causing computational waste and slower responses. This raises a question: can LLMs dynamically adjust the length of their reasoning processes based on task complexity? To address this, we propose the Think in Blocks framework, which enables adaptive reasoning-from zero to deep reasoning-by partitioning the reasoning process into a tunable number of blocks. Our main contributions are: (1) Establishing an explicit block-structured paradigm in which the model first predicts an integer reasoning budget-the number of blocks-and then partitions its reasoning accordingly; (2) Training an adaptive model through a three-stage pipeline-Supervised Fine-Tuning, reward-guided Direct Preference Optimization, and Reinforcement Learning-that adjusts its reasoning depth to problem difficulty; (3) Exploiting the explicit block count to dynamically control reasoning depth at inference time, allowing flexible adjustment of chain-of-thought length during deployment.

A training-data quality gate changes both which examples survive within regions of the input space and how training mass is distributed across those regions, so a gate-versus-random comparison does not isolate these mechanisms. We introduce Counterfactual Gate-Support Decomposition (CGSD), a four-arm, budget-matched design that crosses gate eligibility with support distribution and decomposes the observed gate effect into within-support selection, between-support redistribution, and their interaction. The practical constraint is finite-pool realizability: we characterize mass and token-assembly conditions under which the required arms can be constructed, together with a support-extinction case in which the ordinary design is undefined. On Korean-English and Korean-Japanese retrieval, the mean within-support selection component is the only one that exceeds its calibrated null band (+29.7 and +5.6 holdout items; 30/30 positive replicates), decisively in Korean-English and marginally in Korean-Japanese; redistribution and interaction remain unresolved at the available power. The same pattern holds for a second, unrelated gate family -- a model-confidence threshold rather than a deterministic verifier -- judged against its own null (+27.3 items, 9/9 positive), so the result is not a property of one gate's mechanism. On a mathematics gate, zero-eligibility supports leave the ordinary design undefined at every budget, while the extended design is constructible only inside narrow budget bands that an exhaustive scan locates and that the natural operating point misses -- the assembly condition separating a property of the pool from a limitation of the packer. CGSD therefore returns a decomposition, a constructible-but-underpowered design, or an explicit non-constructibility result, and says which; it prevents support redistribution from being silently interpreted as sample-level gate quality.

We consider multi-draft speculative sampling, where the proposal sequences are sampled independently from different draft models. At each step, a token-level draft selection scheme takes a list of valid tokens as input and produces an output token whose distribution matches that of the target model. Previous works have demonstrated that the optimal scheme (which maximizes the probability of accepting one of the input tokens) can be cast as a solution to a linear program. In this work we show that the optimal scheme can be decomposed into a two-step solution: in the first step an importance sampling (IS) type scheme is used to select one intermediate token; in the second step (single-draft) speculative sampling is applied to generate the output token. For the case of two identical draft models we further 1) establish a necessary and sufficient condition on the distributions of the target and draft models for the acceptance probability to equal one and 2) provide an explicit expression for the optimal acceptance probability. Our theoretical analysis also motives a new class of token-level selection scheme based on weighted importance sampling. Our experimental results demonstrate consistent improvements in the achievable block efficiency and token rates over baseline schemes in a number of scenarios.

Block Diffusion Language Models (BD-LMs) improve diffusion-based text generation with KV caching and flexible-length generation. A natural next step is to extend them from Single-Block Diffusion (SingleBD) to Multi-Block Diffusion (MultiBD), where a running-set of consecutive blocks is decoded concurrently for inter-block parallelism. However, existing BD-LMs are mostly trained under teacher forcing, where the model observes only one noisy block conditioned on a clean prefix. While the recent diffusion forcing strategy introduces visibility among multiple noisy blocks, its training states still differ from MultiBD inference, where decoding operates on a bounded running-set with heterogeneous slot-wise noise patterns. To bridge this gap, we propose Multi-Block Diffusion Language Models (MBD-LMs), obtained by post-training BD-LMs with Multi-block Teacher Forcing (MultiTF). MultiTF integrates teacher forcing and diffusion forcing by training on bounded noise-groups conditioned on clean prefixes, with randomized noise-schedulers that better match MultiBD inference states. To make MultiBD practically executable, we further introduce an optimized decoding algorithm based on the Block Buffer mechanism that preserves prefix-cache reuse, keeps input shapes static, and translates increased decoding parallelism into wall-clock acceleration. Empirically, MBD-LLaDA2-Mini increases average Tokens Per Forward pass (TPF) from 3.47 to 6.19 and improves average accuracy from 79.95% to 81.03%; when combined with DMax, MBD-LLaDA2-Mini-DMax reaches an average TPF of 9.34 with only a 1.02% accuracy drop on math and code benchmarks.

Diffusion transformers have achieved remarkable success in high-quality video generation, yet their reliance on spatiotemporal 3D full attention incurs prohibitive computational cost due to the quadratic complexity of attention. Block sparse attention is a common approach to mitigate this by focusing computation on important regions. However, attention maps in DiTs exhibit inherently dynamic and fine-grained sparsity, which causes existing block sparse attention methods to degrade significantly in quality, especially at high sparsity ratios. In this paper, we revisit block sparse attention and derive a theoretical lower bound on attention recall to characterize the key factors governing its effectiveness. Guided by these insights, we propose DFSAttn, a training-free sparse attention framework that enables dynamic, fine-grained sparsification efficiently. DFSAttn incorporates three core designs: Hilbert curve-based token reordering to achieve fine-grained sparsity while preserving efficient GPU execution, hierarchical block scoring for accurate block importance estimation, and sparse mask caching with adaptive ratios to balance accuracy and efficiency. Experimental results demonstrate that DFSAttn consistently outperforms prior methods under high sparsity, achieving up to 2.1times end-to-end speedup while maintaining high generation quality. Our code is open-sourced and available at https://github.com/jessica-hujie/DFSAttn.

Block-wise discrete diffusion offers an attractive balance between parallel generation and causal dependency modeling, making it a promising backbone for vision-language modeling. However, its practical adoption has been limited by high training cost, slow convergence, and instability, which have so far kept it behind strong autoregressive (AR) baselines. We present SDAR-VL, the first systematic application of block-wise discrete diffusion to large-scale vision-language understanding (VLU), together with an integrated framework for efficient and stable training. This framework unifies three components: (1) Asynchronous Block-wise Noise Scheduling to diversify supervision within each batch; (2) Effective Mask Ratio Scaling for unbiased loss normalization under stochastic masking; and (3) a Progressive Beta Noise Curriculum that increases effective mask coverage while preserving corruption diversity. Experiments on 21 single-image, multi-image, and video benchmarks show that SDAR-VL consistently improves training efficiency, convergence stability, and task performance over conventional block diffusion. On this evaluation suite, SDAR-VL sets a new state of the art among diffusion-based vision-language models and, under matched settings, matches or surpasses strong AR baselines such as LLaVA-OneVision as well as the global diffusion baseline LLaDA-V, establishing block-wise diffusion as a practical backbone for VLU.

Speculative decoding accelerates LLM inference by drafting a tree of candidate continuations and verifying it in one target forward. Existing drafters fall into two camps with opposite weaknesses. Autoregressive drafters such as EAGLE-3 preserve dependence along each draft path but call the drafter once per tree depth, making drafting a non-trivial share of per-iteration latency. Parallel drafters cut drafter calls by predicting multiple future positions in one forward, but each position is predicted without seeing the others, producing paths the verifier rejects. In this paper, we propose SpecBlock, a block-iterative drafter that combines path dependence with cheap drafting. Each drafter forward produces K dependent positions and we call this a block. The draft tree grows through repeated block expansions. Two mechanisms explicitly carry path dependence to keep later draft positions accurate. Within each block, a layer-wise shift carries the previous position's hidden state into every decoder layer. Across blocks, each new block can start from any position of the previous block, inheriting its hidden state to extend the path. To spend verifier budget where acceptance is likely, a co-trained rank head replaces the fixed top-k tree by allocating per-position branching during drafting. To avoid training the drafter on prefixes it never produces at inference, a valid-prefix mask drops the loss at later positions once an earlier one is wrong. Beyond static drafting, a cost-aware bandit at deployment uses free verifier feedback to update the drafter selectively, only when the expected throughput gain exceeds the update cost. Experiments show that SpecBlock improves mean speedup by 8-13% over EAGLE-3 at 44-52% of its drafting cost, and cost-aware adaptation extends this lead to 11-19%.

High-Dimensional Low-Sample Size (HDLSS) tabular domains (e.g., omics) are characterized by n ll m, where n = number of samples, and m = number of features. Such domains often exhibit strong local correlation groups, sparse cross-group dependencies, heavy-tailed non-Gaussian marginals, heteroscedastic noise, and structured missingness, making direct density learning in R^m ill-conditioned since n ll m. We propose BSTabDiff, a block-subunit generative framework that partitions the m observed features into M latent blocks (M ll m) and generates each block via a shared low-dimensional subunit variable, concentrating global dependence learning in the compact block-latent space R^M while decoding to the full feature space with copula-driven dependence, flexible per-feature marginals, and explicit missingness mechanisms. BSTabDiff supports modern deep priors on block latents, including diffusion and normalizing flows, enabling stable synthesis and controllable benchmark generation in the HDLSS regime. Empirically, BSTabDiff produces more realistic and stable high-dimensional synthetic data when compared with unstructured tabular generators on HDLSS data.

Deep learning has aroused extensive attention due to its great empirical success. The efficiency of the block coordinate descent (BCD) methods has been recently demonstrated in deep neural network (DNN) training. However, theoretical studies on their convergence properties are limited due to the highly nonconvex nature of DNN training. In this paper, we aim at providing a general methodology for provable convergence guarantees for this type of methods. In particular, for most of the commonly used DNN training models involving both two- and three-splitting schemes, we establish the global convergence to a critical point at a rate of {cal O}(1/k), where k is the number of iterations. The results extend to general loss functions which have Lipschitz continuous gradients and deep residual networks (ResNets). Our key development adds several new elements to the Kurdyka-{\L}ojasiewicz inequality framework that enables us to carry out the global convergence analysis of BCD in the general scenario of deep learning.

ControlNet offers a powerful way to guide diffusion-based generative models, yet most implementations rely on ad-hoc heuristics to choose which network blocks to control-an approach that varies unpredictably with different tasks. To address this gap, we propose FlexControl, a novel framework that copies all diffusion blocks during training and employs a trainable gating mechanism to dynamically select which blocks to activate at each denoising step. With introducing a computation-aware loss, we can encourage control blocks only to activate when it benefit the generation quality. By eliminating manual block selection, FlexControl enhances adaptability across diverse tasks and streamlines the design pipeline, with computation-aware training loss in an end-to-end training manner. Through comprehensive experiments on both UNet (e.g., SD1.5) and DiT (e.g., SD3.0), we show that our method outperforms existing ControlNet variants in certain key aspects of interest. As evidenced by both quantitative and qualitative evaluations, FlexControl preserves or enhances image fidelity while also reducing computational overhead by selectively activating the most relevant blocks. These results underscore the potential of a flexible, data-driven approach for controlled diffusion and open new avenues for efficient generative model design.

Reinforcement learning has become a cornerstone technique for developing reasoning models in complex tasks, ranging from mathematical problem-solving to imaginary reasoning. The optimization of these models typically relies on policy gradient methods, whose efficacy hinges on the accurate estimation of an advantage function. However, prevailing methods typically employ static advantage estimation, a practice that leads to inefficient credit assignment by neglecting the dynamic utility of training samples over time. This limitation results in suboptimal policy updates, which in turn manifest as slower convergence rates and increased learning instability, as models fail to adapt to evolving sample utilities effectively. To address this problem, we introduce ADORA (Advantage Dynamics via Online Rollout Adaptation), a novel framework for policy optimization. ADORA dynamically adjusts the advantage function's weighting by adaptively categorizing training data into temporarily advantageous and disadvantageous samples, based on their evolving utility during online model rollouts. This tailored data differentiation strategy allows ADORA to be seamlessly integrated into existing policy optimization algorithms without significant architectural modifications, enabling the policy to prioritize learning from more informative experiences and thereby achieve more efficient policy updates. Extensive evaluations across diverse model families and varying data scales demonstrate that ADORA is a robust and efficient framework. It significantly enhances long reasoning in both geometric and mathematical tasks, consistently achieving notable performance gains without requiring sensitive hyperparameter tuning.

Recent advancements in Diffusion Transformers (DiTs) have established them as the state-of-the-art method for video generation. However, their inherently sequential denoising process results in inevitable latency, limiting real-world applicability. Existing acceleration methods either compromise visual quality due to architectural modifications or fail to reuse intermediate features at proper granularity. Our analysis reveals that DiT blocks are the primary contributors to inference latency. Across diffusion timesteps, the feature variations of DiT blocks exhibit a U-shaped pattern with high similarity during intermediate timesteps, which suggests substantial computational redundancy. In this paper, we propose Block-Wise Caching (BWCache), a training-free method to accelerate DiT-based video generation. BWCache dynamically caches and reuses features from DiT blocks across diffusion timesteps. Furthermore, we introduce a similarity indicator that triggers feature reuse only when the differences between block features at adjacent timesteps fall below a threshold, thereby minimizing redundant computations while maintaining visual fidelity. Extensive experiments on several video diffusion models demonstrate that BWCache achieves up to 2.24times speedup with comparable visual quality.

Diffusion language models (DLMs) have recently emerged as a strong alternative to autoregressive models by enabling parallel text generation. To improve inference efficiency and KV-cache compatibility, prior work commonly adopts block-based diffusion, decoding tokens block by block. However, this paradigm suffers from a structural limitation that we term Boundary-Induced Context Truncation (BICT): undecoded tokens near block boundaries are forced to commit without access to nearby future context, even when such context could substantially reduce uncertainty. This limitation degrades decoding certainty and generation quality, especially for tasks requiring precise reasoning, such as mathematical problem solving and code generation. We propose Deferred Commitment Decoding (DCD), a novel, training-free decoding strategy that mitigates this issue. DCD maintains a certainty-aware sliding window over masked tokens, resolving low-uncertainty tokens early while deferring high-uncertainty tokens until sufficient contextual evidence becomes available. Extensive experiments across multiple diffusion language models, benchmarks, and caching configurations show that DCD improves generation accuracy by 1.73% with comparable time on average compared to fixed block-based diffusion methods, with the most significant improvement reaching 16.5%. These results demonstrate that deferring token commitment based on uncertainty is a simple yet effective principle for improving both the quality and efficiency of diffusion language model decoding.

Recent advances in reinforcement learning for foundation models, such as Group Relative Policy Optimization (GRPO), have significantly improved the performance of foundation models on reasoning tasks. Notably, the advantage function serves as a central mechanism in GRPO for ranking the trajectory importance. However, existing explorations encounter both advantage reversion and advantage mirror problems, which hinder the reasonable advantage allocation across different query samples. In this work, we propose an easy but effective GRPO strategy, Mixed Advantage Policy Optimization (MAPO). We reveal that the trajectory appears with different certainty and propose the advantage percent deviation for samples with high-certainty trajectories. Furthermore, we dynamically reweight the advantage function for samples with varying trajectory certainty, thereby adaptively configuring the advantage function to account for sample-specific characteristics. Comparison with related state-of-the-art methods, along with ablation studies on different advantage variants, validates the effectiveness of our approach.

Recent work on language-model adaptation has shown that single models can obtain informative training signals by evaluating their behavior in demonstrationor feedback-augmented contexts, with the help of a teacher network, which is driven by the student's learned parameters. Inspired by this internal-reference principle, we investigate how diffusion models can identify self-referenced training signals without external demonstrations or teacher networks. We introduce SALD, a self-referenced training framework that evaluates each image-caption pair at two noise levels using the same model. The easier, lower-noise path is evaluated without gradient tracking to provide a reference, while the harder, higher-noise path provides the training gradient. Rather than directly distilling the easy-path prediction, SALD uses the difference between two path errors to adapt the hardpath objective. The proposed Advantage-Guided Diffusion (AGD) converts this relative error into a differentiable sample-level weight. Temporal Advantage Memory (TAM) accumulates relative difficulty across training and adapts the future gap between the two noise levels. Spectral Advantage Decomposition (SAD) further compares the residual power spectra of the two paths and constructs a differentiable, frequency-derived latent-element weight. All components share a single set of model parameters, requiring neither an external teacher network nor additional trainable parameters during training or inference, and no modification to the inference procedure. Experiments across multiple architectures and datasets demonstrate consistent improvements in generation quality, while component-wise ablations quantify the contributions of the proposed components.

Autoregressive video diffusion is emerging as a promising paradigm for streaming video synthesis, with step distillation serving as the primary means of accelerating inference. Whether speculative decoding, the dominant acceleration strategy for large language models, can be effectively adapted to autoregressive video generation remains an open question, because video blocks are continuous spatiotemporal tensors with no token-level distribution for exact rejection sampling. We introduce SDVG, which brings speculative decoding to block-based autoregressive video diffusion by replacing token verification with an image-quality router. A 1.3B drafter proposes candidate blocks via four denoising steps; each block is VAE-decoded and scored by ImageReward using worst-frame aggregation--taking the minimum per-frame reward to catch single-frame artifacts that averaging would mask. Blocks scoring above a fixed threshold tau are accepted into the 14B target's KV cache; the rest are regenerated by the target. Two additional design choices prove critical: the first block is always force-rejected to anchor scene composition, and tau serves as a single knob that traces a smooth quality-speed Pareto frontier. On 1003 MovieGenVideoBench prompts (832x480), SDVG retains 98.1% of target-only VisionReward quality (0.0773 vs. 0.0788) at a 1.59x speedup with tau=-0.7, and reaches 2.09x at 95.7% quality retention--while consistently outperforming draft-only generation by over +17%. The framework is training-free, requires no architectural changes, and can be seamlessly integrated into existing autoregressive video generation pipelines.

Block diffusion speculative decoding accelerates LLM inference by predicting all tokens within a block simultaneously for the target model to verify in parallel. Predicting an entire block at once requires a sufficiently capable draft model and effective utilization of the target model's internal knowledge. However, the state-of-the-art method DFlash constrains all draft layers to share a single fused representation derived from only a few target layers, limiting per-layer expressiveness and hindering further scaling of draft capacity. In this paper, we present \modelname, which flares out the narrow conditioning bottleneck of DFlash through a lightweight layer-wise fusion mechanism: each draft layer attends to its own learnable combination of a broad set of target layers at negligible overhead, simultaneously injecting richer target knowledge and providing every draft layer with a distinct input. This enhanced per-layer expressiveness enables scaling the draft model to deeper architectures with consistent gains. We further scale training data from 800K to 2.4M samples to fully exploit the enlarged capacity. On six benchmarks spanning mathematical reasoning, code generation, and conversation, \modelname attains average wall-clock speedups of 5.52x on Qwen3-4B, 5.46x on Qwen3-8B, and 3.91x on GPT-OSS-20B, improving over DFlash by roughly 11\%, 8\%, and 5\% respectively. Our code is available at https://github.com/Tencent/AngelSlim.

Diffusion language models (DLMs) have emerged as a promising alternative to autoregressive (AR) models, offering sub-linear generation latency and bidirectional capabilities that are particularly appealing for code generation and editing. Achieving sub-linear latency in discrete DLMs requires predicting multiple tokens in parallel. However, standard DLMs sample tokens independently from conditional marginal distributions, failing to capture the joint dependencies among concurrently generated tokens. As a result, they often lead to syntactic inconsistencies and break multi-token structures. In this work, we introduce CoDiLA (Coherent Diffusion with Local Autoregression), a method that reconciles parallel sampling with local dependency modeling. Rather than forcing the DLM to resolve fine-grained syntax, CoDiLA delegates local decoding to a small, auxiliary AR model operating on the diffusion latents. This design allows for parallel block generation while ensuring sequential validity within each block and maintaining core DLM capabilities, including bidirectional modeling across blocks. We demonstrate that using a highly compact auxiliary AR model (e.g., 0.6B parameters) effectively eliminates coherence artifacts, establishing a new Pareto frontier for accuracy and speed in code generation benchmarks.

We present BLOCK, an open-source bi-stage character-to-skin pipeline that generates pixel-perfect Minecraft skins from arbitrary character concepts. BLOCK decomposes the problem into (i) a 3D preview synthesis stage driven by a large multimodal model (MLLM) with a carefully designed prompt-and-reference template, producing a consistent dual-panel (front/back) oblique-view Minecraft-style preview; and (ii) a skin decoding stage based on a fine-tuned FLUX.2 model that translates the preview into a skin atlas image. We further propose EvolveLoRA, a progressive LoRA curriculum (text-to-image rightarrow image-to-image rightarrow preview-to-skin) that initializes each phase from the previous adapter to improve stability and efficiency. BLOCK is released with all prompt templates and fine-tuned weights to support reproducible character-to-skin generation.

Block-diffusion language models offer a promising path toward faster-than-autoregressive generation by combining block-wise autoregressive decoding with within-block parallel denoising. However, in the few-step regime needed for practical acceleration, standard confidence-thresholded decoding is often brittle: aggressive thresholds hurt quality, while conservative thresholds require unnecessary denoising steps. Existing approaches that address this issue either require additional training or incur extra test-time compute. We present S2D2, a training-free self-speculative decoding framework for block-diffusion language models. Our key observation is that a block-diffusion model becomes autoregressive when the block size is reduced to one, allowing the same pretrained model to act as both drafter and verifier. S2D2 inserts a speculative verification step into standard block-diffusion decoding and uses lightweight routing policies to decide when verification is worth its cost. This yields a hybrid decoding trajectory in which diffusion proposes tokens in parallel, while the autoregressive mode acts as a local sequence-level critic. Across three mainstream block-diffusion families, S2D2 consistently improves the accuracy-speed tradeoff over strong confidence-thresholding baselines. On SDAR, we observe up to 4.7times speedup over autoregressive decoding, and up to 1.57times over a tuned dynamic decoding baseline while improving accuracy by up to 4.5 points. On LLaDA2.1-Mini, S2D2 remains complementary to built-in self-correction, including a conservative setting where it is 4.4times faster than the static baseline with slightly higher accuracy.

Long-horizon robotic manipulation remains challenging for reinforcement learning (RL) because sparse rewards provide limited guidance for credit assignment. Practical policy improvement thus relies on richer intermediate supervision, such as dense progress rewards, which are costly to obtain and ill-suited to non-monotonic behaviors such as backtracking and recovery. To address this, we propose Advantage Reward Modeling (ARM), a framework that shifts from hard-to-quantify absolute progress to estimating relative advantage. We introduce a cost-effective tri-state labeling strategy -- Progressive, Regressive, and Stagnant -- that reduces human cognitive overhead while ensuring high cross-annotator consistency. By training on these intuitive signals, ARM enables automated progress annotation for both complete demonstrations and fragmented DAgger-style data. Integrating ARM into an offline RL pipeline allows for adaptive action-reward reweighting, effectively filtering suboptimal samples. Our approach achieves a 99.4% success rate on a challenging long-horizon towel-folding task, demonstrating improved stability and data efficiency over current VLA baselines with near-zero human intervention during policy training.

Reinforcement Learning with Verifiable Rewards (RLVR) elicits long chain-of-thought reasoning in large language models (LLMs), but outcome-based rewards lead to coarse-grained advantage estimation. While existing approaches improve RLVR via token-level entropy or sequence-level length control, they lack a semantically grounded, step-level measure of reasoning progress. As a result, LLMs fail to distinguish necessary deduction from redundant verification: they may continue checking after reaching a correct solution and, in extreme cases, overturn a correct trajectory into an incorrect final answer. To remedy the lack of process supervision, we introduce a training-free probing mechanism that extracts intermediate confidence and correctness and combines them into a Step Potential signal that explicitly estimates the reasoning state at each step. Building on this signal, we propose Step Potential Advantage Estimation (SPAE), a fine-grained credit assignment method that amplifies potential gains, penalizes potential drops, and applies penalty after potential saturates to encourage timely termination. Experiments across multiple benchmarks show SPAE consistently improves accuracy while substantially reducing response length, outperforming strong RL baselines and recent efficient reasoning and token-level advantage estimation methods. The code is available at https://github.com/cii030/SPAE-RL.

Tool-calling agents produce heterogeneous outputs, interleaving structured tool invocations with user-facing natural language summaries. This output heterogeneity presents a structural failure mode in standard on-policy Reinforcement Learning (RL): algorithms like GRPO indiscriminately broadcast a homogeneous trajectory-level scalar advantage to all tokens. Consequently, gradient noise from summary generation leaks into tool-decision tokens, causing cross-segment credit misattribution and brittle optimization. In this work, we propose SLCA-GRPO, a framework incorporating Segment-Locked Credit Assignment (SLCA). To enable scalable exploration without costly real APIs and stable training, we first construct the Schema-Guided LLM Simulator (SGLS) as foundational training infrastructure. Building on this, SLCA decouples advantage estimation at the structural segment level within a single group of rollouts, without requiring additional rollouts from intermediate states. Supported by Hierarchical Rewards (HierR), SLCA routes execution advantages to tool tokens and preference advantages to summary tokens, eliminating advantage contamination (the dominant cross-segment credit misattribution channel) within each policy update. On a 7B backbone, SLCA-GRPO accelerates convergence and outperforms standard GRPO, ToolPO, and RLTR by +2.53 pp on in-domain evaluation, +1.36 pp on the Berkeley Function-Calling Leaderboard (BFCL), and +9.15 pp on τ^2-Bench under the same training budgets, achieving higher accuracy with reduced tool redundancy and costs.

Masked Diffusion Models (MDMs) offer greater flexibility in decoding order than autoregressive models but require careful planning to achieve high-quality generation. Existing samplers typically adopt greedy heuristics, prioritizing positions with the highest local certainty to decode at each step. Through failure case analysis, we identify a fundamental limitation of this approach: it neglects the downstream impact of current decoding choices on subsequent steps and fails to minimize cumulative uncertainty. In particular, these methods do not fully exploit the non-causal nature of MDMs, which enables evaluating how a decoding decision reshapes token probabilities/uncertainty across all remaining masked positions. To bridge this gap, we propose the Info-Gain Sampler, a principled decoding framework that balances immediate uncertainty with information gain over future masked tokens. Extensive evaluations across diverse architectures and tasks (reasoning, coding, creative writing, and image generation) demonstrate that Info-Gain Sampler consistently outperforms existing samplers for MDMs. For instance, it achieves a 3.6% improvement in average accuracy on reasoning tasks and a 63.1% win-rate in creative writing. Notably, on reasoning tasks it reduces cumulative uncertainty from 78.4 to 48.6, outperforming the best baseline by a large margin. The code will be available at https://github.com/yks23/Information-Gain-Sampler.

Multimodal large language models (MLLMs) have become a prevailing paradigm for unified video perception. However, post-training on large multi-task datasets remains challenging, as existing reinforcement learning methods sample on-policy groups with few high-quality rollouts even with costly chain-of-thought (CoT) generation. In this paper, we study the sample efficiency and scalability of RL post-training for video MLLMs and introduce OraRL. We identify an overlooked role for annotations: Beyond scoring rollouts, each can enter its on-policy group as an oracle rollout, a direct positive optimization target. Direct oracle integration, however, is nontrivial: a high-reward oracle raises the group baseline and inverts otherwise positive policy advantages, a failure we term advantage inversion. At the core of OraRL is a decoupled advantage estimator: policy rollouts determine an oracle-free baseline, while the oracle-policy gap modulates both a directional gain and a separate detached oracle advantage. Sign-balanced pruning improves efficiency: by retaining only the oracle and the strongest rollouts of each sign, OraRL requires just 2.2x the step time of SFT, less than half the 4.9x required by GRPO with CoT. OraRL scales with model size and data, surpassing its backbone from 0.8B to 9B and GRPO up to 100k prompts. Without chain-of-thought, Video-ORA-9B decodes in 130 ms instead of 4,780 ms. Compared with the respective prior best models, it raises temporal mIoU from 62.5 to 66.0, tracking AO from 73.0 to 78.2, segmentation from 64.3 to 70.4, and the three-benchmark spatial-intelligence macro average from 51.0 to 56.1; on VSI-Bench, it scores 73.1 against 55.0 for GPT-5 and 55.1 for Gemini-3-Pro.

We propose combining memory saving techniques with traditional U-Net architectures to increase the complexity of the models on the Brain Tumor Segmentation (BraTS) challenge. The BraTS challenge consists of a 3D segmentation of a 240x240x155x4 input image into a set of tumor classes. Because of the large volume and need for 3D convolutional layers, this task is very memory intensive. To address this, prior approaches use smaller cropped images while constraining the model's depth and width. Our 3D U-Net uses a reversible version of the mobile inverted bottleneck block defined in MobileNetV2, MnasNet and the more recent EfficientNet architectures to save activation memory during training. Using reversible layers enables the model to recompute input activations given the outputs of that layer, saving memory by eliminating the need to store activations during the forward pass. The inverted residual bottleneck block uses lightweight depthwise separable convolutions to reduce computation by decomposing convolutions into a pointwise convolution and a depthwise convolution. Further, this block inverts traditional bottleneck blocks by placing an intermediate expansion layer between the input and output linear 1x1 convolution, reducing the total number of channels. Given a fixed memory budget, with these memory saving techniques, we are able to train image volumes up to 3x larger, models with 25% more depth, or models with up to 2x the number of channels than a corresponding non-reversible network.

Diffusion-based language models (DLLMs) offer non-sequential, block-wise generation and richer data reuse compared to autoregressive (AR) models, but existing code DLLMs still lag behind strong AR baselines under comparable budgets. We revisit this setting in a controlled study and introduce Stable-DiffCoder, a block diffusion code model that reuses the Seed-Coder architecture, data, and training pipeline. To enable efficient knowledge learning and stable training, we incorporate a block diffusion continual pretraining (CPT) stage enhanced by a tailored warmup and block-wise clipped noise schedule. Under the same data and architecture, Stable-DiffCoder overall outperforms its AR counterpart on a broad suite of code benchmarks. Moreover, relying only on the CPT and supervised fine-tuning stages, Stable-DiffCoder achieves stronger performance than a wide range of \~8B ARs and DLLMs, demonstrating that diffusion-based training can improve code modeling quality beyond AR training alone. Moreover, diffusion-based any-order modeling improves structured code modeling for editing and reasoning, and through data augmentation, benefits low-resource coding languages.

Enhancing the reasoning capabilities of large language models effectively using reinforcement learning (RL) remains a crucial challenge. Existing approaches primarily adopt two contrasting advantage estimation granularities: Token-level methods (e.g., PPO) aim to provide the fine-grained advantage signals but suffer from inaccurate estimation due to difficulties in training an accurate critic model. On the other extreme, trajectory-level methods (e.g., GRPO) solely rely on a coarse-grained advantage signal from the final reward, leading to imprecise credit assignment. To address these limitations, we propose Segment Policy Optimization (SPO), a novel RL framework that leverages segment-level advantage estimation at an intermediate granularity, achieving a better balance by offering more precise credit assignment than trajectory-level methods and requiring fewer estimation points than token-level methods, enabling accurate advantage estimation based on Monte Carlo (MC) without a critic model. SPO features three components with novel strategies: (1) flexible segment partition; (2) accurate segment advantage estimation; and (3) policy optimization using segment advantages, including a novel probability-mask strategy. We further instantiate SPO for two specific scenarios: (1) SPO-chain for short chain-of-thought (CoT), featuring novel cutpoint-based partition and chain-based advantage estimation, achieving 6-12 percentage point improvements in accuracy over PPO and GRPO on GSM8K. (2) SPO-tree for long CoT, featuring novel tree-based advantage estimation, which significantly reduces the cost of MC estimation, achieving 7-11 percentage point improvements over GRPO on MATH500 under 2K and 4K context evaluation. We make our code publicly available at https://github.com/AIFrameResearch/SPO.

Diffusion Large Language Models (dLLMs) commonly decode responses by proceeding autoregressively across blocks while iteratively denoising multiple tokens within each block. This structure makes block-level policy optimization a natural adaptation of autoregressive policy optimization. However, the exact likelihood of a completed block is intractable because it marginalizes over the intermediate states and reveal orders of the denoising process. To realize the block-level formulation, we construct a prefix-block state and use a single model evaluation to define a factorized one-step surrogate for the block likelihood. The resulting block surrogate ratio is a product of its token surrogate ratios, allowing variation at individual positions to propagate across the entire block before clipping. We therefore introduce Prefix-Block Policy Optimization (PBPO), which preserves block-level conditioning but applies surrogate importance weighting and clipping separately to each token. PBPO further diversifies repeated updates by resampling corrupted views of the prompt and revealed prefix, a design motivated by masked-dLLM pre-training. Under our analysis assumptions, block-product weighting amplifies the variance of gradient contributions relative to token-local weighting. Across two LLaDA-family initializations, six benchmarks, and three generation lengths, PBPO achieves competitive performance against existing dLLM RL methods.

A causal-decoder block is hierarchical: lower layers build the residual basis that upper layers attend over. We identify a failure mode in GPT pretraining: upper layers commit to sharp attention patterns before lower-layer features stabilize. We call this premature upper-layer attention specialization. Temporarily slowing only upper-layer Q/K projections during early training improves final perplexity and downstream accuracy without altering other parameters; it prevents upper attention from collapsing onto an immature residual basis. In LLaMA-style blocks, the same intervention is nearly unnecessary. Through ablations, we isolate multiplicative gated FFNs (not RMSNorm or bias removal) as the component that suppresses the upstream residual writes driving the failure. A pathwise analysis unifies both findings: the learning-rate intervention reduces a step-size factor, while gated FFNs reduce a residual-energy factor on the same growth pathway. Our results identify upper-layer Q/K timing as a concrete interaction point between decoder architecture and optimization.

Reinforcement learning (RL) has emerged as an effective approach for enhancing the reasoning capabilities of large language models (LLMs), especially in scenarios where supervised fine-tuning (SFT) falls short due to limited chain-of-thought (CoT) data. Among RL-based post-training methods, group relative advantage estimation, as exemplified by Group Relative Policy Optimization (GRPO), has attracted considerable attention for eliminating the dependency on the value model, thereby simplifying training compared to traditional approaches like Proximal Policy Optimization (PPO). However, we observe that exsiting group relative advantage estimation method still suffers from training inefficiencies, particularly when the estimated advantage approaches zero. To address this limitation, we propose Advantage-Augmented Policy Optimization (AAPO), a novel RL algorithm that optimizes the cross-entropy (CE) loss using advantages enhanced through a momentum-based estimation scheme. This approach effectively mitigates the inefficiencies associated with group relative advantage estimation. Experimental results on multiple mathematical reasoning benchmarks demonstrate the superior performance of AAPO.

We present MegaBlocks, a system for efficient Mixture-of-Experts (MoE) training on GPUs. Our system is motivated by the limitations of current frameworks, which restrict the dynamic routing in MoE layers to satisfy the constraints of existing software and hardware. These formulations force a tradeoff between model quality and hardware efficiency, as users must choose between dropping tokens from the computation or wasting computation and memory on padding. To address these limitations, we reformulate MoE computation in terms of block-sparse operations and develop new block-sparse GPU kernels that efficiently handle the dynamism present in MoEs. Our approach never drops tokens and maps efficiently to modern hardware, enabling end-to-end training speedups of up to 40% over MoEs trained with the state-of-the-art Tutel library and 2.4x over DNNs trained with the highly-optimized Megatron-LM framework.

Block-diffusion drafters have recently emerged as a powerful alternative for speculative decoding by predicting multiple future-token distributions in a single parallel step. However, since these parallel predictions are sampled from position-wise marginals rather than fully conditioned sequences, committing to a single greedy path often fails to capture the target model's preferred trajectory. To address this, we propose BASTION, a budget-aware speculative decoding framework with tree-based diffusion drafting. Unlike existing methods that rely on static tree topologies, BASTION dynamically constructs query-dependent trees by balancing draft quality against hardware constraints. Our framework integrates three synergistic components: (1) an acceptance surrogate that estimates expected accepted length via path confidence, (2) an online latency estimator that calibrates a hardware-aware roofline model, and (3) an adaptive best-first expansion that grows the tree until marginal gains no longer justify incremental verification costs. BASTION is training-free, preserves the target model's distribution, and requires no per-setting tuning. Across diverse benchmarks and GPU architectures, BASTION achieves up to a 6.61times speedup over standard autoregressive decoding, outperforming state-of-the-art block-diffusion baselines by 39%.

Pre-training has improved model accuracy for both classification and generation tasks at the cost of introducing much larger and slower models. Pruning methods have proven to be an effective way of reducing model size, whereas distillation methods are proven for speeding up inference. We introduce a block pruning approach targeting both small and fast models. Our approach extends structured methods by considering blocks of any size and integrates this structure into the movement pruning paradigm for fine-tuning. We find that this approach learns to prune out full components of the underlying model, such as attention heads. Experiments consider classification and generation tasks, yielding among other results a pruned model that is a 2.4x faster, 74% smaller BERT on SQuAD v1, with a 1% drop on F1, competitive both with distilled models in speed and pruned models in size.

3D Gaussian Splatting has demonstrated notable success in large-scale scene reconstruction, but challenges persist due to high training memory consumption and storage overhead. Hybrid representations that integrate implicit and explicit features offer a way to mitigate these limitations. However, when applied in parallelized block-wise training, two critical issues arise since reconstruction accuracy deteriorates due to reduced data diversity when training each block independently, and parallel training restricts the number of divided blocks to the available number of GPUs. To address these issues, we propose Momentum-GS, a novel approach that leverages momentum-based self-distillation to promote consistency and accuracy across the blocks while decoupling the number of blocks from the physical GPU count. Our method maintains a teacher Gaussian decoder updated with momentum, ensuring a stable reference during training. This teacher provides each block with global guidance in a self-distillation manner, promoting spatial consistency in reconstruction. To further ensure consistency across the blocks, we incorporate block weighting, dynamically adjusting each block's weight according to its reconstruction accuracy. Extensive experiments on large-scale scenes show that our method consistently outperforms existing techniques, achieving a 12.8% improvement in LPIPS over CityGaussian with much fewer divided blocks and establishing a new state of the art. Project page: https://jixuan-fan.github.io/Momentum-GS_Page/

Deep neural networks conventionally employ end-to-end backpropagation for their training process, which lacks biological credibility and triggers a locking dilemma during network parameter updates, leading to significant GPU memory use. Supervised local learning, which segments the network into multiple local blocks updated by independent auxiliary networks. However, these methods cannot replace end-to-end training due to lower accuracy, as gradients only propagate within their local block, creating a lack of information exchange between blocks. To address this issue and establish information transfer across blocks, we propose a Momentum Auxiliary Network (MAN) that establishes a dynamic interaction mechanism. The MAN leverages an exponential moving average (EMA) of the parameters from adjacent local blocks to enhance information flow. This auxiliary network, updated through EMA, helps bridge the informational gap between blocks. Nevertheless, we observe that directly applying EMA parameters has certain limitations due to feature discrepancies among local blocks. To overcome this, we introduce learnable biases, further boosting performance. We have validated our method on four image classification datasets (CIFAR-10, STL-10, SVHN, ImageNet), attaining superior performance and substantial memory savings. Notably, our method can reduce GPU memory usage by more than 45\% on the ImageNet dataset compared to end-to-end training, while achieving higher performance. The Momentum Auxiliary Network thus offers a new perspective for supervised local learning. Our code is available at: https://github.com/JunhaoSu0/MAN.

Recent advances have demonstrated that integrating reinforcement learning with rule-based rewards can significantly enhance the reasoning capabilities of large language models, even without supervised fine-tuning. However, prevalent reinforcement learning algorithms such as GRPO and its variants like DAPO, suffer from a coarse granularity issue when computing the advantage. Specifically, they compute rollout-level advantages that assign identical values to every token within a sequence, failing to capture token-specific contributions and hindering effective learning. To address this limitation, we propose Key-token Advantage Estimation (KTAE) - a novel algorithm that estimates fine-grained, token-level advantages without introducing additional models. KTAE leverages the correctness of sampled rollouts and applies statistical analysis to quantify the importance of individual tokens within a sequence to the final outcome. This quantified token-level importance is then combined with the rollout-level advantage to obtain a more fine-grained token-level advantage estimation. Empirical results show that models trained with GRPO+KTAE and DAPO+KTAE outperform baseline methods across five mathematical reasoning benchmarks. Notably, they achieve higher accuracy with shorter responses and even surpass R1-Distill-Qwen-1.5B using the same base model.

We introduce Virtual Width Networks (VWN), a framework that delivers the benefits of wider representations without incurring the quadratic cost of increasing the hidden size. VWN decouples representational width from backbone width, expanding the embedding space while keeping backbone compute nearly constant. In our large-scale experiment, an 8-times expansion accelerates optimization by over 2 times for next-token and 3 times for next-2-token prediction. The advantage amplifies over training as both the loss gap grows and the convergence-speedup ratio increases, showing that VWN is not only token-efficient but also increasingly effective with scale. Moreover, we identify an approximately log-linear scaling relation between virtual width and loss reduction, offering an initial empirical basis and motivation for exploring virtual-width scaling as a new dimension of large-model efficiency.

Speculative decoding losslessly accelerates large language model inference by having a lightweight draft model predict future tokens for verification by the target model. Recent block diffusion drafters further reduce drafting latency by predicting multiple tokens in parallel. However, existing block drafters project target hidden states at every input position into a separate drafter-side KV cache, incurring per-request memory and KV-write overhead that grow with concurrency; directly reusing target KVs in place removes this cache but fails to sustain draft quality throughout the block. We propose a hybrid target-context injection method that complements direct target KV reuse with target hidden states only at the last input position, requiring no separate drafter-side KV cache. Building on this design, we propose H-Spec, a hybrid Mamba-attention parallel drafter that consumes the two target-context sources through complementary modules. Mamba modules are initialized with projected last-token target hidden states, while attention modules reuse target KVs in place. Despite its recurrent formulation, Mamba's parallel scan allows H-Spec to preserve block-parallel drafting. Across three target models and diverse tasks, H-Spec improves over the best baseline by 5.0--13.3% in mean accepted length and 5.3--12.6% in batch-size-1 inter-token latency speedup. Under concurrent serving, H-Spec consistently achieves higher throughput while maintaining lower KV cache utilization than baselines across evaluated concurrency levels.

Diffusion-based large language models (dLLMs) are gaining attention for their inherent capacity for parallel decoding, offering a compelling alternative to autoregressive LLMs. Among various decoding strategies, blockwise semi-autoregressive (semi-AR) approaches are widely adopted due to their natural support for KV caching and their favorable accuracy-speed trade-off. However, this paper identifies two fundamental limitations in the conventional semi-AR decoding approach that applies a fixed block size: i) late decoding overhead, where the unmasking of high-confidence tokens outside the current block is unnecessarily delayed, and ii) premature decoding error, where low-confidence tokens inside the current block are committed too early, leading to incorrect tokens. This paper presents the first systematic investigation challenging the fixed block size assumption in semi-AR decoding. Through a statistical analysis of confidence dynamics during the denoising process, we identify a volatility band (VB) region during dLLM decoding, which encodes local semantic structure and can be used to guide adaptive block sizing. Leveraging these insights, we introduce AdaBlock-dLLM, a training-free, plug-and-play scheduler that adaptively aligns block boundaries with semantic steps by adjusting block size during runtime. Extensive experiments across diverse benchmarks show that AdaBlock-dLLM achieves up to 5.3% accuracy improvement under the same throughput budget. Beyond inference-time optimization, we hope our semantics-aware adaptive scheduling approach and confidence-based analysis will inspire future training strategies for dLLMs.

Block Diffusion Models (BDMs) support parallel generation, flexible-length output, and KV caching, making them promising for efficient document parsing. However, existing BDMs bind denoising and cache commitment to fixed block boundaries: parallelism shrinks during intra-block denoising, while generated tokens cannot be cached until the whole block is completed. Moreover, intra-block bidirectional denoising conflicts with inter-block autoregression, creating inconsistent information flow that can challenge structure-sensitive recognition. We propose the Prefix-Adaptive Block Diffusion Model (PA-BDM), which replaces intra-block bidirectional denoising with causal denoising from prefix to suffix and treats the block size as a maximum candidate range rather than a fixed commitment unit. PA-BDM uses Confidence-gated Structural Loss (CSL) to build low-entropy prefixes before extending training to longer continuations. During inference, Progressive Prefix Commitment (PPC) then dynamically commits the longest reliable prefix into the KV cache and resets the next candidate range from the updated prefix, restoring a large parallel decoding space at each step. Experiments show that the 3B PA-BDM achieves higher recognition scores on several benchmarks and improves inference throughput by 71.6\% over the 2.5B MinerU-Diffusion.

Byte-level language models are usually argued for on the grounds of robustness, multilingual fairness, and character-level skills. We point to a different, structural advantage: because they read and write bytes, any two of them share an output space, so knowledge transfer between them is exact and independent of how either was originally tokenized. We hypothesize that the two distributions a byte-level model produces, one over the next byte, one over where its patch boundaries fall, can be disentangled and changed almost independently. A model could absorb a teacher's capability while keeping its own boundaries, or change how it places those boundaries while keeping its capabilities. We lay out the two experiments that would settle the hypothesis, alongside preliminary measurements of the properties they rest on. We argue that the community should move toward a byte-level interface as a shared standard: if the hypothesis holds, then once byte-level models are the norm, transferring capabilities and reshaping boundaries between them become cheap and routine, free of the per-model tokenizer that blocks them today.

Large-scale foundation models have demonstrated exceptional performance in language and vision tasks. However, the numerous dense matrix-vector operations involved in these large networks pose significant computational challenges during inference. To address these challenges, we introduce the Block-Level Adaptive STructured (BLAST) matrix, designed to learn and leverage efficient structures prevalent in the weight matrices of linear layers within deep learning models. Compared to existing structured matrices, the BLAST matrix offers substantial flexibility, as it can represent various types of structures that are either learned from data or computed from pre-existing weight matrices. We demonstrate the efficiency of using the BLAST matrix for compressing both language and vision tasks, showing that (i) for medium-sized models such as ViT and GPT-2, training with BLAST weights boosts performance while reducing complexity by 70% and 40%, respectively; and (ii) for large foundation models such as Llama-7B and DiT-XL, the BLAST matrix achieves a 2x compression while exhibiting the lowest performance degradation among all tested structured matrices. Our code is available at https://github.com/changwoolee/BLAST.

Reinforcement learning has emerged as a paradigm for post-training large language models, boosting their reasoning capabilities. Such approaches compute an advantage value for each sample, reflecting better or worse performance than expected, thereby yielding both positive and negative signals for training. However, the indiscriminate mixing of the two signals in existing methods, especially from the early stages, may lead to ambiguous guidance and limited gains. To address this issue, we propose **CAPO** (**C**urriculum **A**dvantage **P**olicy **O**ptimization), an adaptive curriculum mechanism based on advantage signals. The proposed mechanism bootstraps imitation learning with positive-only advantage samples to establish robust foundations, and subsequently introduces negative signals to cultivate discriminative capabilities, thereby improving generalization across complex scenarios. Compatible with diverse optimization methods including GRPO, PPO, RLOO, and Reinforce++, our method consistently achieves stable and significant improvements in mathematical reasoning tasks, and further generalizes effectively to multimodal Graphical User Interface (GUI) reasoning scenarios, establishing itself as a versatile and robust optimization framework.

In this paper, we propose a simple and efficient method for value model training on long-context reasoning traces. Compared to existing process reward models (PRMs), our method does not require a fine-grained notion of "step," which is difficult to define for long-context reasoning models. By collecting a dataset of 2.5 million reasoning traces, we train a 1.5B token-level value model and apply it to DeepSeek models for improved performance with test-time compute scaling. We find that block-wise value-guided search (VGS) with a final weighted majority vote achieves better test-time scaling than standard methods such as majority voting or best-of-n. With an inference budget of 64 generations, VGS with DeepSeek-R1-Distill-1.5B achieves an average accuracy of 45.7% across four competition math benchmarks (AIME 2024 & 2025, HMMT Feb 2024 & 2025), reaching parity with o3-mini-medium. Moreover, VGS significantly reduces the inference FLOPs required to achieve the same performance of majority voting. Our dataset, model and codebase are open-sourced.

Despite the remarkable strides made by autoregressive language models, their potential is often hampered by the slow inference speeds inherent in sequential token generation. Blockwise parallel decoding (BPD) was proposed by Stern et al. (2018) as a way to improve inference speed of language models. In this paper, we make two contributions to understanding and improving BPD drafts. We first offer an analysis of the token distributions produced by the BPD prediction heads. Secondly, we use this analysis to inform algorithms to improve BPD inference speed by refining the BPD drafts using small n-gram or neural language models. We empirically show that these refined BPD drafts yield a higher average verified prefix length across tasks.

Diffusion Transformers (DiTs) have become a leading backbone for video generation, yet their quadratic attention cost remains a major bottleneck. Sparse attention reduces this cost by computing only a subset of attention blocks. However, prior methods often either drop the remaining blocks, which incurs information loss, or rely on learned predictors to approximate them, introducing training overhead and potential output distribution shifting. In this paper, we show that the missing contributions can be recovered without training: after semantic clustering, keys and values within each block exhibit strong similarity and can be well summarized by a small set of cluster centroids. Based on this observation, we introduce SVG-EAR, a parameter-free linear compensation branch that uses the centroid to approximate skipped blocks and recover their contributions. While centroid compensation is accurate for most blocks, it can fail on a small subset. Standard sparsification typically selects blocks by attention scores, which indicate where the model places its attention mass, but not where the approximation error would be largest. SVG-EAR therefore performs error-aware routing: a lightweight probe estimates the compensation error for each block, and we compute exactly the blocks with the highest error-to-cost ratio while compensating for skipped blocks. We provide theoretical guarantees that relate attention reconstruction error to clustering quality, and empirically show that SVG-EAR improves the quality-efficiency trade-off and increases throughput at the same generation fidelity on video diffusion tasks. Overall, SVG-EAR establishes a clear Pareto frontier over prior approaches, achieving up to 1.77times and 1.93times speedups while maintaining PSNRs of up to 29.759 and 31.043 on Wan2.2 and HunyuanVideo, respectively.

Diffusion language models enable flexible arbitrary-order generation, but existing sampling methods are mostly designed for early masked diffusion models (MDMs). In this work, we study sampling for recent block diffusion language models (BDLMs). We show empirically and analytically that these models are naturally more aligned with left-to-right decoding than MDMs. Based on this observation, we propose Parallel Autoregressive Decoding (PARD), a simple training-free sampling method that preserves left-to-right unmasking structure while allowing parallel token commitment. Extensive experiments show that PARD consistently outperforms existing parallel samplers in generation quality, while achieving substantial speedups over pure AR decoding with only a small quality gap.

Discrete flow matching provides a flexible framework for generative modeling on discrete structures. However, the standard factorized training objective exposes the model to targets of varying difficulty, mixing well-conditioned, predictable tokens with ambiguous, high-entropy ones. We empirically demonstrate that the uncertainty over the value of each token is closely related to the density of available context in its neighborhood. Motivated by this observation, we propose a simple modification to the underlying continuous-time Markov chain (CTMC) that incorporates local context information. Our context-weighted sampler improves generation quality with negligible computational overhead, while our scaled cross-entropy loss function reweights the training signal from different tokens and reduces generative perplexity by up to 63% on OpenWebText. Moreover, our approach matches a strong semi-autoregressive block diffusion baseline in quality while retaining the ability to perform generation in any order. These results highlight the role of local context as an important factor in discrete generative modeling and show that simple context-aware modifications can significantly improve both sampling and training efficiency.

We present Future-KL Influenced Policy Optimization (FIPO), a reinforcement learning algorithm designed to overcome reasoning bottlenecks in large language models. While GRPO style training scales effectively, it typically relies on outcome-based rewards (ORM) that distribute a global advantage uniformly across every token in a trajectory. We argue that this coarse-grained credit assignment imposes a performance ceiling by failing to distinguish critical logical pivots from trivial tokens. FIPO addresses this by incorporating discounted future-KL divergence into the policy update, creating a dense advantage formulation that re-weights tokens based on their influence on subsequent trajectory behavior. Empirically, FIPO enables models to break through the length stagnation seen in standard baselines. Evaluated on Qwen2.5-32B, FIPO extends the average chain-of-thought length from roughly 4,000 to over 10,000 tokens and increases AIME 2024 Pass@1 accuracy from 50.0% to a peak of 58.0% (converging at approximately 56.0\%). This outperforms both DeepSeek-R1-Zero-Math-32B (around 47.0%) and o1-mini (approximately 56.0%). Our results suggest that establishing dense advantage formulations is a vital path for evolving ORM-based algorithms to unlock the full reasoning potential of base models. We open-source our training system, built on the verl framework.

Sparse matrix-vector multiplication (SpMV) is crucial in computational science, engineering, and machine learning. Despite substantial efforts to improve SpMV performance on GPUs through various techniques, issues related to data locality, hardware utilization, and load balancing persist, leaving room for further optimization. This paper presents CB-SpMV, a cache-friendly SpMV optimization algorithm, using a novel data convergent and adaptable 2D blocking structure. The matrix in CB-SpMV is divided into independent sub-blocks, with virtual pointers aggregating different types of intra-block data for better cache-level data locality. To enhance hardware utilization, a block-aware column aggregation strategy and the selection of sub-block formats are proposed to accelerate computation and adapt to varying sparse matrices. Finally, an inter-block load-balancing algorithm is designed to ensure efficient workload distribution across thread blocks. Experimental evaluations on 2,843 matrices from the SuiteSparse Collection show that CB-SpMV significantly improves cache hit rates and achieves average speedups of up to 3.95x over state-of-the-art methods like cuSPARSE-BSR, TileSpMV, and DASP on NVIDIA A100 and RTX 4090 GPUs. The implementation is available at: https://github.com/xing-cong/CB-Sparse.

Reinforcement Learning from Verifier Rewards (RLVR) has emerged as a widely used approach for post-training large language models on reasoning tasks, with group-based methods such as GRPO and its variants gaining broad adoption. These methods rely on group-relative advantage estimation to avoid learned critics, yet its theoretical properties remain poorly understood. In this work, we uncover a fundamental issue of group-based RL: the group-relative advantage estimator is inherently biased relative to the true (expected) advantage. We provide the first theoretical analysis showing that it systematically underestimates advantages for hard prompts and overestimates them for easy prompts, leading to imbalanced exploration and exploitation. To address this issue, we propose History-Aware Adaptive Difficulty Weighting (HA-DW), an adaptive reweighting scheme that adjusts advantage estimates based on an evolving difficulty anchor and training dynamics. Both theoretical analysis and experiments on five mathematical reasoning benchmarks demonstrate that HA-DW consistently improves performance when integrated into GRPO and its variants. Our results suggest that correcting biased advantage estimation is critical for robust and efficient RLVR training.

Diffusion Transformers (DiTs) have demonstrated remarkable generative capabilities, particularly benefiting from Transformer architectures that enhance visual and artistic fidelity. However, their inherently sequential denoising process results in high inference latency, limiting their deployment in real-time scenarios. Existing training-free acceleration approaches typically reuse intermediate features at fixed timesteps or layers, overlooking the evolving semantic focus across denoising stages and Transformer blocks.To address this, we propose Sortblock, a training-free inference acceleration framework that dynamically caches block-wise features based on their similarity across adjacent timesteps. By ranking the evolution of residuals, Sortblock adaptively determines a recomputation ratio, selectively skipping redundant computations while preserving generation quality. Furthermore, we incorporate a lightweight linear prediction mechanism to reduce accumulated errors in skipped blocks.Extensive experiments across various tasks and DiT architectures demonstrate that Sortblock achieves over 2times inference speedup with minimal degradation in output quality, offering an effective and generalizable solution for accelerating diffusion-based generative models.

Dense linear layers are the dominant computational bottleneck in foundation models. Identifying more efficient alternatives to dense matrices has enormous potential for building more compute-efficient models, as exemplified by the success of convolutional networks in the image domain. In this work, we systematically explore structured matrices as replacements for dense matrices. We show that different structures often require drastically different initialization scales and learning rates, which are crucial to performance, especially as models scale. Using insights from the Maximal Update Parameterization, we determine the optimal scaling for initialization and learning rates of these unconventional layers. Finally, we measure the scaling laws of different structures to compare how quickly their performance improves with compute. We propose a novel matrix family containing Monarch matrices, the Block Tensor-Train (BTT), which we show performs better than dense matrices for the same compute on multiple tasks. On CIFAR-10/100 with augmentation, BTT achieves exponentially lower training loss than dense when training MLPs and ViTs. BTT matches dense ViT-S/32 performance on ImageNet-1k with 3.8 times less compute and is more efficient than dense for training small GPT-2 language models.

Training strong video generation models usually requires massive datasets, large parameter counts, and substantial compute. In this work, we ask whether strong text-to-video quality is possible at a much smaller budget: fewer than 10M clips and less than 100,000 H200 GPU hours. Our core claim is that part of the answer lies in how model capacity is organized, not only in how much of it is used. In video generation, prompt alignment, temporal consistency, and fine-detail recovery can interfere with one another when they are handled through the same pathway. Motif-Video 2B addresses this by separating these roles architecturally, rather than relying on scale alone. The model combines two key ideas. First, Shared Cross-Attention strengthens text control when video token sequences become long. Second, a three-part backbone separates early fusion, joint representation learning, and detail refinement. To make this design effective under a limited compute budget, we pair it with an efficient training recipe based on dynamic token routing and early-phase feature alignment to a frozen pretrained video encoder. Our analysis shows that later blocks develop clearer cross-frame attention structure than standard single-stream baselines. On VBench, Motif-Video~2B reaches 83.76\%, surpassing Wan2.1 14B while using 7times fewer parameters and substantially less training data. These results suggest that careful architectural specialization, combined with an efficiency-oriented training recipe, can narrow or exceed the quality gap typically associated with much larger video models.

Learning from off-policy data is essential for sample-efficient reinforcement learning. In the present work, we build on the insight that the advantage function can be understood as the causal effect of an action on the return, and show that this allows us to decompose the return of a trajectory into parts caused by the agent's actions (skill) and parts outside of the agent's control (luck). Furthermore, this decomposition enables us to naturally extend Direct Advantage Estimation (DAE) to off-policy settings (Off-policy DAE). The resulting method can learn from off-policy trajectories without relying on importance sampling techniques or truncating off-policy actions. We draw connections between Off-policy DAE and previous methods to demonstrate how it can speed up learning and when the proposed off-policy corrections are important. Finally, we use the MinAtar environments to illustrate how ignoring off-policy corrections can lead to suboptimal policy optimization performance.

Block-sparse attention is promising for accelerating long-context LLM pre-filling, yet identifying relevant blocks efficiently remains a bottleneck. Existing methods typically employ coarse-grained attention as a proxy for block importance estimation, but often resort to expensive token-level searching or scoring, resulting in significant selection overhead. In this work, we trace the inaccuracy of standard coarse-grained attention via mean pooling to a theoretical root cause: the interaction between mean pooling and Rotary Positional Embeddings (RoPE). We prove that mean pooling acts as a low-pass filter that induces destructive interference in high-frequency dimensions, effectively creating a "blind spot" for local positional information (e.g., slash patterns). To address this, we introduce Prism, a training-free spectral-aware approach that decomposes block selection into high-frequency and low-frequency branches. By applying energy-based temperature calibration, Prism restores the attenuated positional signals directly from pooled representations, enabling block importance estimation using purely block-level operations, thereby improving efficiency. Extensive evaluations confirm that Prism maintains accuracy parity with full attention while delivering up to 5.1times speedup.

Speculative decoding accelerates large language model inference without changing the target distribution, but no single drafting structure performs best across real-world workloads. Autoregressive multi-token prediction (MTP) is a lightweight, stable proposal mechanism, whereas block-parallel diffusion amortizes drafting latency over much longer candidate sequences; the better choice depends strongly on the output distribution. We present AngelSpec, a unified training framework for MTP and block-parallel speculative decoding that addresses this heterogeneity at three levels. At the training level, rather than fitting one universal drafter to a uniform data mixture, we co-specialize structure and data: the MTP drafter is trained on diverse conversational data for high-entropy open-ended chat, and the block-diffusion drafter on code and mathematics data for longer predictable continuations. At the architecture level, we propose DFly, a block-diffusion framework combining a hybrid target-conditioning backbone with a predecessor-conditioned autoregressive head, improving target-feature utilization and intra-block dependency modeling while keeping generation parallel. At the inference level, both acceptance length and verification cost vary with domain, request, online load, and hardware, so DFly treats verification as a shared batch-level resource: it reallocates compute toward high-confidence prefixes across requests and combines expected utility with a profiled cost model to adapt verification depth online. Across the Hy3 series, DFly raises the average accepted length on Hy3-A21B by roughly 30% and attains the highest average throughput at every tested concurrency from 4 to 64, a 1.98-2.40x speedup over autoregressive decoding and 10.5-11.8% higher throughput than DFlash. We release AngelSpec to support training and extending these methods.

The central building block of convolutional neural networks (CNNs) is the convolution operator, which enables networks to construct informative features by fusing both spatial and channel-wise information within local receptive fields at each layer. A broad range of prior research has investigated the spatial component of this relationship, seeking to strengthen the representational power of a CNN by enhancing the quality of spatial encodings throughout its feature hierarchy. In this work, we focus instead on the channel relationship and propose a novel architectural unit, which we term the "Squeeze-and-Excitation" (SE) block, that adaptively recalibrates channel-wise feature responses by explicitly modelling interdependencies between channels. We show that these blocks can be stacked together to form SENet architectures that generalise extremely effectively across different datasets. We further demonstrate that SE blocks bring significant improvements in performance for existing state-of-the-art CNNs at slight additional computational cost. Squeeze-and-Excitation Networks formed the foundation of our ILSVRC 2017 classification submission which won first place and reduced the top-5 error to 2.251%, surpassing the winning entry of 2016 by a relative improvement of ~25%. Models and code are available at https://github.com/hujie-frank/SENet.

Three-dimensional building generation is vital for applications in gaming, virtual reality, and digital twins, yet current methods face challenges in producing diverse, structured, and hierarchically coherent buildings. We propose BuildingBlock, a hybrid approach that integrates generative models, procedural content generation (PCG), and large language models (LLMs) to address these limitations. Specifically, our method introduces a two-phase pipeline: the Layout Generation Phase (LGP) and the Building Construction Phase (BCP). LGP reframes box-based layout generation as a point-cloud generation task, utilizing a newly constructed architectural dataset and a Transformer-based diffusion model to create globally consistent layouts. With LLMs, these layouts are extended into rule-based hierarchical designs, seamlessly incorporating component styles and spatial structures. The BCP leverages these layouts to guide PCG, enabling local-customizable, high-quality structured building generation. Experimental results demonstrate BuildingBlock's effectiveness in generating diverse and hierarchically structured buildings, achieving state-of-the-art results on multiple benchmarks, and paving the way for scalable and intuitive architectural workflows.

Flow-based generative models parameterize probability distributions through an invertible transformation and can be trained by maximum likelihood. Invertible residual networks provide a flexible family of transformations where only Lipschitz conditions rather than strict architectural constraints are needed for enforcing invertibility. However, prior work trained invertible residual networks for density estimation by relying on biased log-density estimates whose bias increased with the network's expressiveness. We give a tractable unbiased estimate of the log density using a "Russian roulette" estimator, and reduce the memory required during training by using an alternative infinite series for the gradient. Furthermore, we improve invertible residual blocks by proposing the use of activation functions that avoid derivative saturation and generalizing the Lipschitz condition to induced mixed norms. The resulting approach, called Residual Flows, achieves state-of-the-art performance on density estimation amongst flow-based models, and outperforms networks that use coupling blocks at joint generative and discriminative modeling.

We propose a scalable Forward-Forward (FF) algorithm that eliminates the need for backpropagation by training each layer separately. Unlike backpropagation, FF avoids backward gradients and can be more modular and memory efficient, making it appealing for large networks. We extend FF to modern convolutional architectures, such as MobileNetV3 and ResNet18, by introducing a new way to compute losses for convolutional layers. Experiments show that our method achieves performance comparable to standard backpropagation. Furthermore, when we divide the network into blocks, such as the residual blocks in ResNet, and apply backpropagation only within each block, but not across blocks, our hybrid design tends to outperform backpropagation baselines while maintaining a similar training speed. Finally, we present experiments on small datasets and transfer learning that confirm the adaptability of our method.

Multi-vector dense retrieval methods like ColBERT systematically use a single-layer linear projection to reduce the dimensionality of individual vectors. In this study, we explore the implications of the MaxSim operator on the gradient flows of the training of multi-vector models and show that such a simple linear projection has inherent, if non-critical, limitations in this setting. We then discuss the theoretical improvements that could result from replacing this single-layer projection with well-studied alternative feedforward linear networks (FFN), such as deeper, non-linear FFN blocks, GLU blocks, and skip-connections, could alleviate these limitations. Through the design and systematic evaluation of alternate projection blocks, we show that better-designed final projections positively impact the downstream performance of ColBERT models. We highlight that many projection variants outperform the original linear projections, with the best-performing variants increasing average performance on a range of retrieval benchmarks across domains by over 2 NDCG@10 points. We then conduct further exploration on the individual parameters of these projections block in order to understand what drives this empirical performance, highlighting the particular importance of upscaled intermediate projections and residual connections. As part of these ablation studies, we show that numerous suboptimal projection variants still outperform the traditional single-layer projection across multiple benchmarks, confirming our hypothesis. Finally, we observe that this effect is consistent across random seeds, further confirming that replacing the linear layer of ColBERT models is a robust, drop-in upgrade.

Discrete diffusion models offer a promising alternative to autoregressive generation through parallel decoding, but they suffer from a sampling wall: once categorical sampling occurs, rich distributional information collapses into one-hot vectors and cannot be propagated across steps, forcing subsequent steps to operate with limited information. To mitigate this problem, we introduce Loopholing, a novel and simple mechanism that preserves this information via a deterministic latent pathway, leading to Loopholing Discrete Diffusion Models (LDDMs). Trained efficiently with a self-conditioning strategy, LDDMs achieve substantial gains-reducing generative perplexity by up to 61% over prior baselines, closing (and in some cases surpassing) the gap with autoregressive models, and producing more coherent text. Applied to reasoning tasks, LDDMs also improve performance on arithmetic benchmarks such as Countdown and Game of 24. These results also indicate that loopholing mitigates idle steps and oscillations, providing a scalable path toward high-quality non-autoregressive text generation.

Target-conditioned diffusion drafters predict candidate tokens in parallel, yet each new block must wait for updated target-model hidden states. This forces drafting and verification to run sequentially, limiting speedup even though each block is generated in one pass. We introduce D3D, a standalone diffusion drafter that removes this inter-round dependency. D3D combines blockwise denoising with auxiliary autoregressive supervision to achieve long accepted prefixes without target hidden states. This independence lets D3D draft successor blocks during verification in one packed pass, enabling asynchronous speculative decoding. We progressively prune layers according to their effect on acceptance length to reduce the cost of packed drafting. Removing five of 36 layers retains over 99\% of mean acceptance length across three benchmarks with Qwen3-8B as the target. Across seven benchmarks, D3D averages 5.00times and 5.71times decoding speedup with Qwen3-8B and Qwen3-32B targets, compared with 4.03times and 3.67times for DFlash. On GSM8K with Qwen3-32B, speedup reaches 7.48times. Code is publicly available at https://github.com/fudan-generative-vision/D3D.

Large language models (LLMs) typically generate text autoregressively (AR), predicting one token at a time. Block diffusion language models (dLLMs) instead generate blocks sequentially while denoising multiple tokens in parallel within each block, offering a promising way to accelerate generation. Rather than training such models from scratch, recent work adapts strong pretrained AR models into block dLLMs through distillation. On-policy distillation (OPD) has been widely used for LLM training because it supervises the student on states generated by its current policy, rather than only on fixed offline trajectories. By training on the states the student actually visits, it reduces the mismatch between training and generation and can provide more relevant supervision as the student evolves. Recent work has extended this idea to AR-to-block-diffusion conversion. However, this setting introduces a fundamental mismatch in supervision: the block-diffusion student and the causal AR teacher condition on different information at the same training state. The student predicts from the entire partially denoised block, including visible future context, whereas the standard AR teacher target is defined only from the causal prefix. As a result, the teacher distribution used for distillation is not fully aligned with the information available to the student. We therefore introduce d-OPD, a future-aware on-policy distillation method that corrects the AR teacher distribution to better align with the student-visible state by incorporating visible future information within each block, providing supervision that better matches the information used by the student. Across Qwen3 models from 0.6B to 8B, d-OPD improves the six-benchmark average by up to 4.0 points over OPDLM and reduces training time by 1.35-1.58times. The code is available at https://github.com/mit-han-lab/d-OPD.

The goal of L-step speculative decoding is to accelerate autoregressive decoding of a target model by using a cheaper draft model to generate a candidate path of L tokens. Based on a verification algorithm involving target and draft model probabilities, a prefix of the candidate sequence is accepted, and an additional correction token is sampled from a residual distribution to ensure that the final output adheres to the target distribution. While standard speculative decoding uses a verification algorithm which is independent at each token on the path, a recent extension called block verification uses a joint condition involving all sampled on-path probabilities. Block verification (BV) was shown to be optimal over all verification algorithms which use only on-path probabilities, improving on standard speculative decoding. In this work, we first show that block verification is optimal even over verification algorithms that use off-path probabilities, by constructing an information-agnostic linear program (LP). Further, we can extend our LP to the setting where the draft model samples multiple candidate paths, and use it to construct a natural class of multi-path block verification generalizations. While computing the optimal algorithm in this class is not tractable, by considering a stricter class of greedy algorithms, we can formulate an efficient method called greedy multi-path block verification (GBV). Empirically, GBV can improve block efficiency by over 30% and reduce decoding walltimes by over 15% relative to BV. On Llama-3 70B, GBV can improve the end-to-end decoding throughput over SOTA multi-path verification methods by more than 15%.

We tackle the challenge of generating the infinitely extendable 3D world -- large, continuous environments with coherent geometry and realistic appearance. Existing methods face key challenges: 2D-lifting approaches suffer from geometric and appearance inconsistencies across views, 3D implicit representations are hard to scale up, and current 3D foundation models are mostly object-centric, limiting their applicability to scene-level generation. Our key insight is leveraging strong generation priors from pre-trained 3D models for structured scene block generation. To this end, we propose WorldGrow, a hierarchical framework for unbounded 3D scene synthesis. Our method features three core components: (1) a data curation pipeline that extracts high-quality scene blocks for training, making the 3D structured latent representations suitable for scene generation; (2) a 3D block inpainting mechanism that enables context-aware scene extension; and (3) a coarse-to-fine generation strategy that ensures both global layout plausibility and local geometric/textural fidelity. Evaluated on the large-scale 3D-FRONT dataset, WorldGrow achieves SOTA performance in geometry reconstruction, while uniquely supporting infinite scene generation with photorealistic and structurally consistent outputs. These results highlight its capability for constructing large-scale virtual environments and potential for building future world models.

We introduce training-free looped transformers, in which a lightweight inference-time wrapper loops a contiguous mid-stack block of layers of a frozen checkpoint without additional fine-tuning, continued training, or architectural changes. Unlike prior looped transformer methods that train with the looped structure end-to-end, we retrofit recurrence onto pretrained models at test time. We show that naive block reapplication usually degrades performance, highlighting the importance of the loop application strategy. Motivated by viewing a pre-norm transformer block as a forward Euler step on an ODE, we instead treat looping as a refinement of the same approximation, replacing one large update with smaller damped sub-steps. Across seven dense, sparse MoE, and MLA+MoE model families, our method improves Qwen3-4B-Instruct by +2.64 pp on MMLU-Pro, Qwen3-30B-A3B-Instruct by +1.14 pp on CommonsenseQA, and Moonlight-16B-A3B-Instruct by +1.20 pp on OpenBookQA.

Standard policy gradients weight each sampled action by advantage alone, regardless of how likely that action was under the current policy. This creates two pathologies: within a single decision context (e.g. one image or prompt), a rare negative-advantage action can disproportionately distort the update direction; across many such contexts in a batch, the expected gradient over-allocates budget to contexts the policy already handles well. We introduce the Delightful Policy Gradient (DG), which gates each term with a sigmoid of delight, the product of advantage and action surprisal (negative log-probability). For K-armed bandits, DG provably improves directional accuracy in a single context and, across multiple contexts, shifts the expected gradient strictly closer to the supervised cross-entropy oracle. This second effect is not variance reduction: it persists even with infinite samples. Empirically, DG outperforms REINFORCE, PPO, and advantage-weighted baselines across MNIST, transformer sequence modeling, and continuous control, with larger gains on harder tasks.

Agentic multimodal models perform diverse operations on an image via code and reason over the returned view, an effective paradigm for fine-grained visual question answering. However, code operations can be useful, redundant, or misleading. Outcome-only rewards cannot precisely distinguish these cases, and existing process rewards either fail to attribute final correctness to individual tool calls, or require an external judge model. To address this, we introduce Tool-Augmented Credit Optimization (TACO), a GRPO variant for code-tool agents built on two coupled advantage channels. The first, Differential Answer-Probe Reward (DAPR), is a self-supervised, judge-free tool-contribution advantage that credits each tool call by its own effect on answering correctly. Probe tokens inserted into the model's reasoning elicit its predictions with and without the tool, and the difference in outcome reward is taken as the call's value: positive for a useful call, negative for a misleading one, and zero for one that changes nothing. This reuses the existing answer checker with no auxiliary judge, and, being a difference rather than an absolute probe score, is naturally robust to probe-hacking. The second is the outcome advantage from the final answer, distributed by Outcome-Gated Advantage Routing (OGAR): a parameter-free rule that, conditioned on the call's outcome, delivers this credit only to the responsible segments, suppressing wasted tool calls without any cost term. We train TACO through a two-stage SFT+RL pipeline. Extensive experiments across perception, reasoning, and general multimodal benchmarks show that it yields consistent accuracy gains and learns to invoke its tools only when they help.

Controllable diffusion methods have substantially expanded the practical utility of diffusion models, but they are typically developed as isolated, backbone-specific systems with incompatible training pipelines, parameter formats, and runtime hooks. This fragmentation makes it difficult to reuse infrastructure across tasks, transfer capabilities across backbones, or compose multiple controls within a single generation pipeline. We present Diffusion Templates, a unified and open plugin framework that decouples base-model inference from controllable capability injection. The framework is organized around three components: Template models that map arbitrary task-specific inputs to an intermediate capability representation, a Template cache that functions as a standardized interface for capability injection, and a Template pipeline that loads, merges, and injects one or more Template caches into the base diffusion runtime. Because the interface is defined at the systems level rather than tied to a specific control architecture, heterogeneous capability carriers such as KV-Cache and LoRA can be supported under the same abstraction. Based on this design, we build a diverse model zoo spanning structural control, brightness adjustment, color adjustment, image editing, super-resolution, sharpness enhancement, aesthetic alignment, content reference, local inpainting, and age control. These case studies show that Diffusion Templates can unify a broad range of controllable generation tasks while preserving modularity, composability, and practical extensibility across rapidly evolving diffusion backbones. All resources will be open sourced, including code, models, and datasets.

Large-scale vision-language-action (VLA) models provide powerful priors for robot manipulation, yet adapting them to a specific deployment remains challenging. Supervised fine-tuning (SFT) on task-specific demonstrations provides a step toward deployment, but faces two persistent limitations: static data provide limited coverage of out-of-distribution states, and standard imitation objectives do not distinguish progressing behavior from less useful data. Interactive post-training can address these limitations, but typically requires repeated policy execution and human intervention on a physical robot. We introduce HIL-UMI, a policy-guided Universal Manipulation Interface (UMI) framework for robot-free human-in-the-loop VLA post-training. During handheld UMI demonstrations, HIL-UMI queries the current policy on the same observation stream without executing its predictions. The Energy Score compares the human action trajectory with policy inference and triggers collection when their discrepancy indicates an out-of-distribution region. In a separate feedback loop, low online advantage predictions identify essential segments for refining a progress-based advantage estimator. The updated estimator then guides advantage-conditioned behavioral cloning using a balanced mixture of base demonstrations and new policy data. This design preserves the iterative and policy-aware nature of human-in-the-loop learning while decoupling data collection from robot deployment. Experiments on four real-world tasks spanning long-horizon and precise manipulation show that HIL-UMI achieves consistent improvement over SFT and benefits from both targeted collection and advantage refinement. Moreover, HIL-UMI outperforms HG-DAgger on Clean Up Table with lower per-frame collection time, suggesting a scalable path for VLA post-training across operators and locations.

Since the breakthrough performance of AlexNet in 2012, convolutional neural networks (convnets) have grown into extremely powerful vision models. Deep learning researchers have used convnets to perform vision tasks with accuracy that was unachievable a decade ago. Confronted with the immense computation that convnets use, deep learning researchers also became interested in efficiency. However, the engineers who deployed efficient convnets soon realized that they were slower than the previous generation, despite using fewer operations. Many reverted to older models that ran faster. Hence researchers switched the objective of their search from arithmetic complexity to latency and produced a new wave of models that performed better. Paradoxically, these models also used more operations. Skepticism grew among researchers and engineers alike about the relevance of arithmetic complexity. Contrary to the prevailing view that latency and arithmetic complexity are irreconcilable, a simple formula relates both through computational efficiency. This insight enabled us to co-optimize the separate factors that determine latency. We observed that the degenerate conv2d layers that produce the best accuracy--complexity trade-off also use significant memory resources and have low computational efficiency. We devised block fusion algorithms to implement all the layers of a residual block in a single kernel, thereby creating temporal locality, avoiding communication, and reducing workspace size. Our ConvFirst model with block-fusion kernels has less arithmetic complexity and greater computational efficiency than baseline models and kernels, and ran approximately four times as fast as ConvNeXt. We also created novel tools, including efficiency gap plots and waterline analysis. Our unified approach to convnet efficiency envisions a new era of models and kernels that achieve greater accuracy at lower cost.

Classical convergence guarantees for gradient-based learning in games require the pseudo-gradient to be (strongly) monotone in Euclidean geometry as shown by rosen(1965), a condition that often fails even in simple games with strong cross-player couplings. We introduce Small-Gain Nash (SGN), a block small-gain condition in a custom block-weighted geometry. SGN converts local curvature and cross-player Lipschitz coupling bounds into a tractable certificate of contraction. It constructs a weighted block metric in which the pseudo-gradient becomes strongly monotone on any region where these bounds hold, even when it is non-monotone in the Euclidean sense. The continuous flow is exponentially contracting in this designed geometry, and projected Euler and RK4 discretizations converge under explicit step-size bounds derived from the SGN margin and a local Lipschitz constant. Our analysis reveals a certified ``timescale band'', a non-asymptotic, metric-based certificate that plays a TTUR-like role: rather than forcing asymptotic timescale separation via vanishing, unequal step sizes, SGN identifies a finite band of relative metric weights for which a single-step-size dynamics is provably contractive. We validate the framework on quadratic games where Euclidean monotonicity analysis fails to predict convergence, but SGN successfully certifies it, and extend the construction to mirror/Fisher geometries for entropy-regularized policy gradient in Markov games. The result is an offline certification pipeline that estimates curvature, coupling, and Lipschitz parameters on compact regions, optimizes block weights to enlarge the SGN margin, and returns a structural, computable convergence certificate consisting of a metric, contraction rate, and safe step-sizes for non-monotone games.

Long video generation is a critical step toward building realistic world models, requiring both high visual fidelity and long-range interaction consistency. Recent autoregressive diffusion models enable long-horizon generation through KV cache reuse, yet suffer from two fundamental challenges: failure to preserve long-range interactions due to sliding-window KV cache and error accumulation that progressively degrades generation quality over time. To address these issues, we propose BIFE, a framework that introduces a semantic sparse KV cache for retrieval-based long-range conditioning and a Block Forcing training strategy to enforce cross-block consistency. Together, these designs preserve historical interactions while mitigating drift, enabling stable and coherent minute-long video generation. We also introduce InterVBench, a minute-long video benchmark with fine-grained block-level annotations and Video Drift Error metrics. Extensive experiments on InterVBench and VBench-Long demonstrate that BIFE achieves state-of-the-art performance, including a 22.2% improvement on VDE-Subject and a 19.4% improvement on VDE-Clarity over baselines. Website: https://alibaba-damo-academy.github.io/BIFE. Code: https://github.com/alibaba-damo-academy/BIFE.

Speculative decoding accelerates autoregressive (AR) language models by letting a small model draft tokens serially and a large model verify them in parallel. We reverse these roles. Starting from a standard AR checkpoint, we fine-tune the large model into a proposer that predicts a block of future tokens in a single forward pass, then use one additional forward pass to verify the proposed block. This gives ProVe, Proposer-Verifier decoding. The verifier can be a smaller AR model or the proposer itself; the latter gives ProVe-lossless, which reproduces the proposer's greedy AR decoding. Block proposals already provide substantial room for acceleration: with a block size of 16, the proposed block has an average AR-matching prefix of 6.6 tokens on GSM8K. Across six benchmarks with a 32B proposer, ProVe-lossless reaches 2.5x average AR throughput without training a separate draft head. With a small 3B verifier, ProVe reaches 2.7x average throughput at 2.6 accuracy points below AR on the six-task average, providing a controllable tradeoff between speed and accuracy.

Autoregressive next token prediction language models offer powerful capabilities but face significant challenges in practical deployment due to the high computational and memory costs of inference, particularly during the decoding stage. We introduce Set Block Decoding (SBD), a simple and flexible paradigm that accelerates generation by integrating standard next token prediction (NTP) and masked token prediction (MATP) within a single architecture. SBD allows the model to sample multiple, not necessarily consecutive, future tokens in parallel, a key distinction from previous acceleration methods. This flexibility allows the use of advanced solvers from the discrete diffusion literature, offering significant speedups without sacrificing accuracy. SBD requires no architectural changes or extra training hyperparameters, maintains compatibility with exact KV-caching, and can be implemented by fine-tuning existing next token prediction models. By fine-tuning Llama-3.1 8B and Qwen-3 8B, we demonstrate that SBD enables a 3-5x reduction in the number of forward passes required for generation while achieving same performance as equivalent NTP training.

Although autoregressive models have dominated language modeling in recent years, there has been a growing interest in exploring alternative paradigms to the conventional next-token prediction framework. Diffusion-based language models have emerged as a compelling alternative due to their powerful parallel generation capabilities and inherent editability. However, these models are often constrained by fixed-length generation. A promising direction is to combine the strengths of both paradigms, segmenting sequences into blocks, modeling autoregressive dependencies across blocks while leveraging discrete diffusion to estimate the conditional distribution within each block given the preceding context. Nevertheless, their practical application is often hindered by two key limitations: rigid fixed-length outputs and a lack of flexible control mechanisms. In this work, we address the critical limitations of fixed granularity and weak controllability in current large diffusion language models. We propose CtrlDiff, a dynamic and controllable semi-autoregressive framework that adaptively determines the size of each generation block based on local semantics using reinforcement learning. Furthermore, we introduce a classifier-guided control mechanism tailored to discrete diffusion, which significantly reduces computational overhead while facilitating efficient post-hoc conditioning without retraining. Extensive experiments demonstrate that CtrlDiff sets a new standard among hybrid diffusion models, narrows the performance gap to state-of-the-art autoregressive approaches, and enables effective conditional text generation across diverse tasks.

Recent work shows that, beyond discrete reasoning through explicit chain-of-thought steps, which are limited by the boundaries of natural languages, large language models (LLMs) can also reason continuously in latent space, allowing richer information per step and thereby improving token efficiency. Despite this promise, latent reasoning still faces two challenges, especially in training-free settings: 1) purely latent reasoning broadens the search distribution by maintaining multiple implicit paths, which diffuses probability mass, introduces noise, and impedes convergence to a single high-confidence solution, thereby hurting accuracy; and 2) overthinking persists even without explicit text, wasting tokens and degrading efficiency. To address these issues, we introduce SwiReasoning, a training-free framework for LLM reasoning which features two key innovations: 1) SwiReasoning dynamically switches between explicit and latent reasoning, guided by block-wise confidence estimated from entropy trends in next-token distributions, to balance exploration and exploitation and promote timely convergence. 2) By limiting the maximum number of thinking-block switches, SwiReasoning curbs overthinking and improves token efficiency across varying problem difficulties. On widely used mathematics and STEM benchmarks, SwiReasoning consistently improves average accuracy by 1.5%-2.8% across reasoning LLMs of different model families and scales. Furthermore, under constrained budgets, SwiReasoning improves average token efficiency by 56%-79%, with larger gains as budgets tighten.