Daily Papers

The affordable, robust, compact (ARC) reactor conceptual design study aims to reduce the size, cost, and complexity of a combined fusion nuclear science facility (FNSF) and demonstration fusion Pilot power plant. ARC is a 200-250 MWe tokamak reactor with a major radius of 3.3 m, a minor radius of 1.1 m, and an on-axis magnetic field of 9.2 T. ARC has rare earth barium copper oxide (REBCO) superconducting toroidal field coils, which have joints to enable disassembly. This allows the vacuum vessel to be replaced quickly, mitigating first wall survivability concerns, and permits a single device to test many vacuum vessel designs and divertor materials. The design point has a plasma fusion gain of Q_p~13.6, yet is fully non-inductive, with a modest bootstrap fraction of only ~63%. Thus ARC offers a high power gain with relatively large external control of the current profile. This highly attractive combination is enabled by the ~23 T peak field on coil with newly available REBCO superconductor technology. External current drive is provided by two innovative inboard RF launchers using 25 MW of lower hybrid and 13.6 MW of ion cyclotron fast wave power. The resulting efficient current drive provides a robust, steady state core plasma far from disruptive limits. ARC uses an all-liquid blanket, consisting of low pressure, slowly flowing fluorine lithium beryllium (FLiBe) molten salt. The liquid blanket is low-risk technology and provides effective neutron moderation and shielding, excellent heat removal, and a tritium breeding ratio >= 1.1. The large temperature range over which FLiBe is liquid permits blanket operation at 900 K with single phase fluid cooling and a high-efficiency Brayton cycle, allowing for net electricity generation when operating ARC as a Pilot power plant.

The Vision-and-Language Navigation (VLN) task requires an agent to follow natural language instructions and navigate through complex environments. Existing MLLM-based VLN methods primarily rely on imitation learning (IL) and often use DAgger for post-training to mitigate covariate shift. While effective, these approaches incur substantial data collection and training costs. Reinforcement learning (RL) offers a promising alternative. However, prior VLN RL methods lack dynamic interaction with the environment and depend on expert trajectories for reward shaping, rather than engaging in open-ended active exploration. This restricts the agent's ability to discover diverse and plausible navigation routes. To address these limitations, we propose ActiveVLN, a VLN framework that explicitly enables active exploration through multi-turn RL. In the first stage, a small fraction of expert trajectories is used for IL to bootstrap the agent. In the second stage, the agent iteratively predicts and executes actions, automatically collects diverse trajectories, and optimizes multiple rollouts via the GRPO objective. To further improve RL efficiency, we introduce a dynamic early-stopping strategy to prune long-tail or likely failed trajectories, along with additional engineering optimizations. Experiments show that ActiveVLN achieves the largest performance gains over IL baselines compared to both DAgger-based and prior RL-based post-training methods, while reaching competitive performance with state-of-the-art approaches despite using a smaller model. Code and data will be released soon.

The bootstrap is a popular data-driven method to quantify statistical uncertainty, but for modern high-dimensional problems, it could suffer from huge computational costs due to the need to repeatedly generate resamples and refit models. We study the use of bootstraps in high-dimensional environments with a small number of resamples. In particular, we show that with a recent "cheap" bootstrap perspective, using a number of resamples as small as one could attain valid coverage even when the dimension grows closely with the sample size, thus strongly supporting the implementability of the bootstrap for large-scale problems. We validate our theoretical results and compare the performance of our approach with other benchmarks via a range of experiments.

This paper introduces a structural equation formulation that gives rise to a new family of quasi-periodic Gaussian processes, useful to process a broad class of natural and physiological signals. The proposed formulation simplifies generation and forecasting, and provides hyperparameter estimates, which we exploit in a convergent and consistent iterative estimation algorithm. A bootstrap approach for standard error estimation and confidence intervals is also provided. We demonstrate the computational and scaling benefits of the proposed approach on a broad class of problems, including water level tidal analysis, CO_{2} emission data, and sunspot numbers data. By leveraging the structural equations, our method reduces the cost of likelihood evaluations and predictions from O(k^2 p^2) to O(p^2), significantly improving scalability.

We study simplified bootstrap problems for probability distributions on the infinite line and the circle. We show that the rapid convergence of the bootstrap method for problems on the infinite line is related to the fact that the smallest eigenvalue of the positive matrices in the exact solution becomes exponentially small for large matrices, while the moments grow factorially. As a result, the positivity condition is very finely tuned. For problems on the circle we show instead that the entries of the positive matrix of Fourier modes of the distribution depend linearly on the initial data of the recursion, with factorially growing coefficients. By positivity, these matrix elements are bounded in absolute value by one, so the initial data must also be fine-tuned. Additionally, we find that we can largely bypass the semi-definite program (SDP) nature of the problem on a circle by recognizing that these Fourier modes must be asymptotically exponentially small. With a simple ansatz, which we call the shoestring bootstrap, we can efficiently identify an interior point of the set of allowed matrices with much higher precision than conventional SDP bounds permit. We apply this method to solving unitary matrix model integrals by numerically constructing the orthogonal polynomials associated with the circle distribution.

Testing equality of two high-dimensional covariance matrices is challenging when many entries differ only slightly. Dependence among sample covariance entries can also affect the finite-sample size and power of tests that aggregate their differences. We propose a studentized ell_2-type statistic that averages squared, marginally standardized differences between corresponding entries of the two sample covariance matrices. Before constructing the statistic, we apply the same nonsingular linear transformation to both samples. In the transformed coordinates, the covariance-equality hypothesis is unchanged, whereas the standardized differences and correlations among their estimators generally change. The transformation can therefore incorporate structural or scientific information without reducing dimension. We approximate the null distribution using a Gaussian multiplier bootstrap that uses coordinatewise studentization and avoids forming or inverting the full covariance matrix of the vectorized sample covariance entries. For deterministic transformations, we derive nonasymptotic Gaussian and bootstrap approximation bounds and establish asymptotic size validity and power consistency. We also show that replacing a population transformation by a same-sample estimator leaves the statistic and bootstrap critical value asymptotically unchanged in relative terms under an operator-norm convergence condition. Simulations show that suitable transformations improve size accuracy and power under weak dependence. An analysis of breast cancer gene-expression data illustrates the method.

Assessing sampling uncertainty in extremum estimation can be challenging when the asymptotic variance is not analytically tractable. Bootstrap inference offers a feasible solution but can be computationally costly especially when the model is complex. This paper uses iterates of a specially designed stochastic optimization algorithm as draws from which both point estimates and bootstrap standard errors can be computed in a single run. The draws are generated by the gradient and Hessian computed from batches of data that are resampled at each iteration. We show that these draws yield consistent estimates and asymptotically valid frequentist inference for a large class of regular problems. The algorithm provides accurate standard errors in simulation examples and empirical applications at low computational costs. The draws from the algorithm also provide a convenient way to detect data irregularities.

The correct use of model evaluation, model selection, and algorithm selection techniques is vital in academic machine learning research as well as in many industrial settings. This article reviews different techniques that can be used for each of these three subtasks and discusses the main advantages and disadvantages of each technique with references to theoretical and empirical studies. Further, recommendations are given to encourage best yet feasible practices in research and applications of machine learning. Common methods such as the holdout method for model evaluation and selection are covered, which are not recommended when working with small datasets. Different flavors of the bootstrap technique are introduced for estimating the uncertainty of performance estimates, as an alternative to confidence intervals via normal approximation if bootstrapping is computationally feasible. Common cross-validation techniques such as leave-one-out cross-validation and k-fold cross-validation are reviewed, the bias-variance trade-off for choosing k is discussed, and practical tips for the optimal choice of k are given based on empirical evidence. Different statistical tests for algorithm comparisons are presented, and strategies for dealing with multiple comparisons such as omnibus tests and multiple-comparison corrections are discussed. Finally, alternative methods for algorithm selection, such as the combined F-test 5x2 cross-validation and nested cross-validation, are recommended for comparing machine learning algorithms when datasets are small.

Reliable uncertainty quantification remains a central challenge in predictive modeling. While Bayesian methods are theoretically appealing, their predictive intervals can exhibit poor frequentist calibration, particularly with small sample sizes or model misspecification. We introduce a practical and broadly applicable Bayesian conformal approach based on the influence-function Bayesian bootstrap (BB) with data-driven tuning of the Dirichlet concentration parameter, α. By efficiently approximating the Bayesian bootstrap predictive distribution via influence functions and calibrating α to optimize empirical coverage or average log-probability, our method constructs prediction intervals and distributions that are both well-calibrated and sharp. Across a range of regression models and data settings, this Bayesian conformal framework consistently yields improved empirical coverage and log-score compared to standard Bayesian posteriors. Our procedure is fast, easy to implement, and offers a flexible approach for distributional calibration in predictive modeling.

This paper argues for the widest possible use of bootstrap confidence intervals for comparing NLP system performances instead of the state-of-the-art status (SOTA) and statistical significance testing. Their main benefits are to draw attention to the difference in performance between two systems and to help assessing the degree of superiority of one system over another. Two cases studies, one comparing several systems and the other based on a K-fold cross-validation procedure, illustrate these benefits. A python module for obtaining these confidence intervals as well as a second function implementing the Fisher-Pitman test for paired samples are freely available on PyPi.

Sequential trial emulation (STE) estimates the effect of a sustained treatment by stacking nested emulated trials with inverse-probability weighting. Additive-hazards STE estimators of the marginal risk difference recommend the nonparametric bootstrap without evaluating its coverage. Using a correctly-specifiable mechanism (up to a small, disclosed residual), we compare analytic and bootstrap standard errors for both estimands. Exploiting the closed-form linearity of the additive-hazards estimating equation, we derive the influence functions and prove the default row-level robust variance inconsistent for the marginal risk-difference curve, and show the same failure empirically for the constant hazard difference: the row-level variance omits a within-subject cross-trial covariance that is positive under a sign condition we verify across our mechanisms, and is anticonservative at every horizon except the first - only there, where the covariance is zero, is the row-level standard error unimpaired. The subject-clustered variance and multiplier bootstrap are consistent for the fixed-weight linearisation and support simultaneous confidence bands, whose measured coverage is 0.88. Across our simulations the model-based and row-level robust intervals are anticonservative and worsen with sample size, coverage falling to 0.71 at n=5000; clustering leaves the constant-hazard-difference coverage near 0.86 at n=5000, and the multiplier bootstrap leaves the risk-difference-curve coverage near 0.90 (0.86 at the longest horizon). The STE constant hazard difference is a design-weighted summary of a time-varying effect, dependent on the trial structure. We illustrate on the Stanford heart transplant data and provide them in the steCI R package.

Consistently checking the statistical significance of experimental results is one of the mandatory methodological steps to address the so-called "reproducibility crisis" in deep reinforcement learning. In this tutorial paper, we explain how the number of random seeds relates to the probabilities of statistical errors. For both the t-test and the bootstrap confidence interval test, we recall theoretical guidelines to determine the number of random seeds one should use to provide a statistically significant comparison of the performance of two algorithms. Finally, we discuss the influence of deviations from the assumptions usually made by statistical tests. We show that they can lead to inaccurate evaluations of statistical errors and provide guidelines to counter these negative effects. We make our code available to perform the tests.

Code agents increasingly help developers work with unfamiliar repositories, but every such task depends on a costly prerequisite: bootstrapping the repository into a usable development state. This process requires substantial trial-and-error exploration, yet the resulting knowledge--resolved dependencies, repair strategies--stays trapped in a single conversation, unavailable to future agents. We therefore formulate repository bootstrapping as a reusable startup knowledge problem and introduce BootstrapAgent, a multi-agent framework that distills the heuristics discovered during bootstrap exploration into a persistent, verifiable, agent-consumable .bootstrap contract. Through evidence extraction, structured planning, deterministic Docker-based verification, and trace-driven repair, BootstrapAgent generates a contract covering environment setup, diagnostic checks, minimal verification, and accumulated repair knowledge. We further propose warm repair with clean replay to accelerate iterative debugging without sacrificing cold-start reproducibility, and a delta repair with sanity check to prevent reward hacking. Experiments on three benchmarks show that BootstrapAgent achieves a 92.9% success rate, outperforming the baseline by over 10% while reducing downstream agent token usage by 25.9% and build time by 22.3%. Our code is available at https://github.com/Vossera/BootstrapAgent.

Equivariance theory predicts that an architectural symmetry prior reduces sample complexity by a factor of |G|; this is widely cited but rarely measured as a scaling law with controls that separate the prior from its confounds. On a controlled C_n-symmetric task, we report three findings. First, a wrong-group control with identical orbit size and matched compute is worse than no constraint (joint pairwise CI [+0.79, +3.26] excludes zero, robust across estimators); misaligned constraint is actively harmful, not merely unhelpful. Second, an augmentation baseline equipped with test-time orbit averaging matches the equivariant model exactly -- bit-identical per-epoch validation curves across matched cells -- so the architecture-vs-augmentation gap is conditional on asymmetric test-time computation, not unconditional. Third, the relative exchange rate beta_diff = 1.28 is consistent in sign and order of magnitude with the theoretical 1.0 (single-level CI [+0.92, +2.05]); the more conservative two-level bootstrap (seeds x group sizes) widens this to [-0.63, +1.72], including zero, and a finer-N replication on a sqrt(2)-spaced grid is inconclusive (point estimate -0.82). The methodological contributions -- the relative-rate estimator that cancels the shared-difficulty confound, the wrong-group control, and a pre-specified failure taxonomy -- transfer to any inductive bias whose strength can be parameterised. Honest scoping: the primary estimator beta_diff was adopted post-hoc after the initial analysis revealed a positive-slope identifiability problem; the design was never externally pre-registered; and the headline number rests on an OLS slope over seven group sizes on a coarse N grid. This is an exploratory study, not a confirmatory measurement; the wrong-group result is the cleanest finding and the one we report with the most confidence. A registered replication on fresh seeds is future work.

We use tools from geometric statistics to analyze the usual estimation procedure of a template shape. This applies to shapes from landmarks, curves, surfaces, images etc. We demonstrate the asymptotic bias of the template shape estimation using the stratified geometry of the shape space. We give a Taylor expansion of the bias with respect to a parameter sigma describing the measurement error on the data. We propose two bootstrap procedures that quantify the bias and correct it, if needed. They are applicable for any type of shape data. We give a rule of thumb to provide intuition on whether the bias has to be corrected. This exhibits the parameters that control the bias' magnitude. We illustrate our results on simulated and real shape data.

Experiments with pre-trained models such as BERT are often based on a single checkpoint. While the conclusions drawn apply to the artifact tested in the experiment (i.e., the particular instance of the model), it is not always clear whether they hold for the more general procedure which includes the architecture, training data, initialization scheme, and loss function. Recent work has shown that repeating the pre-training process can lead to substantially different performance, suggesting that an alternate strategy is needed to make principled statements about procedures. To enable researchers to draw more robust conclusions, we introduce the MultiBERTs, a set of 25 BERT-Base checkpoints, trained with similar hyper-parameters as the original BERT model but differing in random weight initialization and shuffling of training data. We also define the Multi-Bootstrap, a non-parametric bootstrap method for statistical inference designed for settings where there are multiple pre-trained models and limited test data. To illustrate our approach, we present a case study of gender bias in coreference resolution, in which the Multi-Bootstrap lets us measure effects that may not be detected with a single checkpoint. We release our models and statistical library along with an additional set of 140 intermediate checkpoints captured during pre-training to facilitate research on learning dynamics.

We advocate a strategy of bootstrapping Feynman integrals from just knowledge of their singular behavior. This approach is complementary to other bootstrap programs, which exploit non-perturbative constraints such as unitarity, or amplitude-level constraints such as gauge invariance. We begin by studying where a Feynman integral can become singular, and the behavior it exhibits near these singularities. We then characterize the space of functions that we expect the integral to evaluate to, in order to formulate an appropriate ansatz. Finally, we derive constraints on where each singularity can appear in this ansatz, and use information about the expansion of the integral around singular points in order to determine the value of all remaining free coefficients. Throughout, we highlight how constraints that have previously only been derived for integrals with generic masses can be extended to integrals involving particles of equal or vanishing mass. We illustrate the effectiveness of this approach by bootstrapping a number of examples, including the four-point double box with a massive internal loop.

Using a 100-day symmetric window around the January 2025 U.S. presidential inauguration, non-parametric statistical methods with bootstrap resampling (10,000 iterations) analyze distributional properties and anomalies. Results indicate a statistically significant 3.61\% Indonesian rupiah depreciation post-inauguration, with a large effect size (Cliff's Delta = -0.9224, CI: [-0.9727, -0.8571]). Central tendency shifted markedly, yet volatility remained stable (variance ratio = 0.9061, p = 0.504). Four significant anomalies exhibiting temporal clustering are detected. These findings provide quantitative evidence of political transition effects on emerging market currencies, highlighting implications for monetary policy and currency risk management.

We study the conformal bootstrap of 1D CFTs on the straight Maldacena-Wilson line in 4D {cal N}=4 super-Yang-Mills theory. We introduce an improved truncation scheme with an 'OPE tail' approximation and use it to reproduce the 'bootstrability' results of Cavagli\`a et al. for the OPE-coefficients squared of the first three unprotected operators. For example, for the first OPE-coefficient squared at 't Hooft coupling (4pi)^2, linear-functional methods with two sum rules from integrated correlators give the rigorous result 0.294014873 pm 4.88 cdot 10^{-8}, whereas our methods give with machine-precision computations 0.294014228 pm 6.77 cdot 10^{-7}. For our numerical searches, we benchmark the Reinforcement Learning Soft Actor-Critic algorithm against an Interior Point Method algorithm (IPOPT) and comment on the merits of each algorithm.

Non-linear interactions during inflation generate non-Gaussianities in the distribution of primordial curvature. In many theories, the physics is scale-invariant, such that the induced three-point function depends solely on a dimensionless shape function S(x,y)sim k^6B_ζ(kx,ky,k). To confront such models with observations, one typically builds specialized estimators for each shape, then applies them to cosmic microwave background datasets at significant computational expense. In this Letter, we take a different approach, directly reconstructing S(x,y) from observations using an efficient logarithmically-binned estimator in primordial-space (motivated by the modal program). Applying this to temperature and polarization maps from Planck, we obtain high-resolution shape measurements across the full (x,y)-plane, including squeezed limits. Our approach is close-to-optimal, highly interpretable, and preserves the information content on (optimally-analyzed) standard templates within approx 10%; moreover, we can use it to assess the scale-dependence of our constraints, finding that Planck is sensitive to approx 6 e-folds of non-Gaussian evolution with a peak sensitivity around 0.1h,Mpc^{-1}. Since we work directly in shape-space, data and theory can be compared in milliseconds. As an example, we perform a search for massive particle exchange using a suite of over 20,000 theoretical templates computed with exact bootstrap methods (for the first time) across a wide range of masses, spins, and sound-speeds; the spin-two analysis yields a maximum significance of 2.6σ. Our approach can be used to probe a wide range of scale-invariant models in orders-of-magnitude less time than with direct estimators, allowing the inflationary paradigm to be explored in new ways.

Large language models (LLMs) are increasingly deployed for tabular question answering, yet calibration on structured data is largely unstudied. This paper presents the first systematic comparison of five confidence estimation methods across five frontier LLMs and two tabular QA benchmarks. All models are severely overconfident (smooth ECE 0.35-0.64 versus 0.10-0.15 reported for textual QA). A consistent self-evaluation versus perturbation dichotomy replicates across both benchmarks and all four fully-covered models: self-evaluation methods (verbalized, P(True)) achieve AUROC 0.42-0.76, while perturbation methods (semantic entropy, self-consistency, and our Multi-Format Agreement) achieve AUROC 0.78-0.86. Per-model paired bootstrap tests reject the null at p<0.001 after Holm-Bonferroni correction, and a 3-seed check on GPT-4o-mini gives a per-seed standard deviation of only 0.006. The paper proposes Multi-Format Agreement (MFA), which exploits the lossless and deterministic serialization variation unique to structured data (Markdown, HTML, JSON, CSV) to estimate confidence at 20% lower API cost than sampling baselines. MFA reduces ECE by 44-63%, generalizes across all four models on TableBench (mean AUROC 0.80), and combines complementarily with sampling: an MFA + self-consistency ensemble lifts AUROC from 0.74 to 0.82. A secondary contribution, structure-aware recalibration, improves AUROC by +10 percentage points over standard post-hoc methods.

Benchmarks of machine learning models often include many datasets, making evaluation expensive. For efficiency, it is preferable to perform evaluations on small, representative datasets instead. The selection of such subsets typically relies on heuristics and is rarely analyzed for the robustness of the resulting model rankings. We introduce a framework to perform the task of selecting datasets subsets with an evaluation of how different selection strategies preserve the global model rankings. Our framework includes bootstrap aggregation, which provides valid confidence intervals, allowing a principled comparison of selection strategies. We consider clustering, design criteria (A/D-optimality), random baselines, and greedy farthest-first (FAFI). For the latter, we derive upper bounds on selection quality in terms of ranking errors as a function of the number of selected datasets. Empirically, in time series classification (TSC, 112 datasets) and in a supplementary natural language processing benchmark derived from MTEB (57 tasks), several selection strategies improve rank preservation compared with random subsets, including simple FAFI. In contrast, in recommender systems (30 datasets), the improvement of strategies over random selection is small and typically statistically insignificant. For TSC, our best-performing strategy achieves a Spearman correlation of 0.95 with the full benchmark model rankings using only five selected datasets. Additional experiments indicate that the effectiveness of selection approaches depends on both the quality of dataset representations and the scale of the benchmarking regime.

In natural language processing, a recently popular line of work explores how to best report the experimental results of neural networks. One exemplar publication, titled "Show Your Work: Improved Reporting of Experimental Results," advocates for reporting the expected validation effectiveness of the best-tuned model, with respect to the computational budget. In the present work, we critically examine this paper. As far as statistical generalizability is concerned, we find unspoken pitfalls and caveats with this approach. We analytically show that their estimator is biased and uses error-prone assumptions. We find that the estimator favors negative errors and yields poor bootstrapped confidence intervals. We derive an unbiased alternative and bolster our claims with empirical evidence from statistical simulation. Our codebase is at http://github.com/castorini/meanmax.

We study the problem of optimizing biological sequences, e.g., proteins, DNA, and RNA, to maximize a black-box score function that is only evaluated in an offline dataset. We propose a novel solution, bootstrapped training of score-conditioned generator (BootGen) algorithm. Our algorithm repeats a two-stage process. In the first stage, our algorithm trains the biological sequence generator with rank-based weights to enhance the accuracy of sequence generation based on high scores. The subsequent stage involves bootstrapping, which augments the training dataset with self-generated data labeled by a proxy score function. Our key idea is to align the score-based generation with a proxy score function, which distills the knowledge of the proxy score function to the generator. After training, we aggregate samples from multiple bootstrapped generators and proxies to produce a diverse design. Extensive experiments show that our method outperforms competitive baselines on biological sequential design tasks. We provide reproducible source code: https://github.com/kaist-silab/bootgen{https://github.com/kaist-silab/bootgen}.

Agent harnesses supply planning guidance, organize execution, and check completion. We study how these components affect success, erroneous acceptance, and cost in two Retail experiments and an Airline pilot in τ^2-bench. The primary comparison pairs prewritten task-specific plans (Fixed) with shuffled policy text matched in word count (Sham), isolating the contribution of guidance content. Across 265 matched cells, Fixed improves oracle-verified success by 7.17 percentage points (90\% task-clustered bootstrap interval, 1.15--13.36 points), with gains concentrated in higher-complexity tasks. A read-only terminal verifier rejects 61\% of Retail oracle-invalid episodes while withholding 17\% of correct ones, at less than one cent of additional cost per episode. Which component matters more depends on the loss assigned to erroneous acceptance: at low liability the planning gain dominates; at high liability the verifier's avoided false passes dominate---and a standalone verifier captures nearly all the false-pass benefit of the full planning-plus-verification stack at a fraction of its cost.

We study numerically the 6D (2,0) superconformal bootstrap using the soft-Actor-Critic (SAC) algorithm as a stochastic optimizer. We focus on the four-point functions of scalar superconformal primaries in the energy-momentum multiplet. Starting from the supergravity limit, we perform searches for adiabatically varied central charges and derive two curves for a collection of 80 CFT data (70 of these data correspond to unprotected long multiplets and 10 to protected short multiplets). We conjecture that the two curves capture the A- and D-series (2,0) theories. Our results are competitive when compared to the existing bounds coming from standard numerical bootstrap methods, and data obtained using the OPE inversion formula. With this paper we are also releasing our Python implementation of the SAC algorithm, BootSTOP. The paper discusses the main functionality features of this package.

Best-of-N inference scaling (drawing N candidate answers from a language model and returning the one a reward model ranks highest) improves accuracy by an amount that varies across models, but predicting that amount in advance currently requires running the procedure end-to-end. Prior work links cheap statistics of a model's sampled outputs and validation-set correctness (how often samples agree, how diverse they are, how confident the model is, and where correct samples appear) to model behavior, but does not isolate which of these form a stable, compact predictor of best-of-N gain. We fit ridge predictors on features computed from a single labeled validation-set sampling pass, use bootstrap-Lasso as a stability analysis of the candidate feature set, and give a concentration analysis with an explicit linear-approximation residual. Across three base-model families, six post-training methods, and math and reasoning task domains, the stability analysis identifies a strict three-feature core spanning prompt-level agreement spread, label-assisted first-correct-sample position, and completion-length variance; a compact ridge predictor built from this core plus an entropy add-on reaches Spearman ρ= 0.90 with actual best-of-N gain under a reward-model verifier. The intended use is labeled validation-set screening of candidate configurations before paying the full reward-model scoring cost.

Recent machine learning papers often report 1-2 percentage point improvements from a single run on a benchmark. These gains are highly sensitive to random seeds, data ordering, and implementation details, yet are rarely accompanied by uncertainty estimates or significance tests. It is therefore unclear when a reported +1-2% reflects a real algorithmic advance versus noise. We revisit this problem under realistic compute budgets, where only a few runs are affordable. We propose a simple, PC-friendly evaluation protocol based on paired multi-seed runs, bias-corrected and accelerated (BCa) bootstrap confidence intervals, and a sign-flip permutation test on per-seed deltas. The protocol is intentionally conservative and is meant as a guardrail against over-claiming. We instantiate it on CIFAR-10, CIFAR-10N, and AG News using synthetic no-improvement, small-gain, and medium-gain scenarios. Single runs and unpaired t-tests often suggest significant gains for 0.6-2.0 point improvements, especially on text. With only three seeds, our paired protocol never declares significance in these settings. We argue that such conservative evaluation is a safer default for small gains under tight budgets.

Statistical prediction methods typically require some form of fine-tuning of tuning parameter(s), with K-fold cross-validation as the canonical procedure. For ridge regression there exist numerous procedures, but common for all, including cross-validation, is that one single parameter is chosen for all future predictions. We propose instead to calculate a unique tuning parameter for each individual for which we wish to predict an outcome. This generates an individualized prediction by focusing on the vector of covariates of a specific individual. The focused ridge -- fridge -- procedure is introduced with a two-part contribution: 1) first we define an oracle tuning parameter minimizing the mean squared prediction error of a specific covariate vector, 2) then we propose to estimate this tuning parameter by using plug-in estimates of the regression coefficients and error variance parameter. The procedure is extended to logistic ridge regression by utilizing parametric bootstrap. For high-dimensional data, we propose to use ridge regression with cross-validation as the plug-in estimate, and simulations show that fridge gives smaller average prediction error than ridge with cross-validation for both simulated and real data. We illustrate the new concept for both linear and logistic regression models in two applications of personalized medicine: predicting individual risk and treatment response based on gene expression data. The method is implemented in the R package "fridge".

Learning causal graphs from multivariate time series is a ubiquitous challenge in all application domains dealing with time-dependent systems, such as in Earth sciences, biology, or engineering, to name a few. Recent developments for this causal discovery learning task have shown considerable skill, notably the specific time-series adaptations of the popular conditional independence-based learning framework. However, uncertainty estimation is challenging for conditional independence-based methods. Here, we introduce a novel bootstrap approach designed for time series causal discovery that preserves the temporal dependencies and lag structure. It can be combined with a range of time series causal discovery methods and provides a measure of confidence for the links of the time series graphs. Furthermore, next to confidence estimation, an aggregation, also called bagging, of the bootstrapped graphs by majority voting results in bagged causal discovery methods. In this work, we combine this approach with the state-of-the-art conditional-independence-based algorithm PCMCI+. With extensive numerical experiments we empirically demonstrate that, in addition to providing confidence measures for links, Bagged-PCMCI+ improves in precision and recall as compared to its base algorithm PCMCI+, at the cost of higher computational demands. These statistical performance improvements are especially pronounced in the more challenging settings (short time sample size, large number of variables, high autocorrelation). Our bootstrap approach can also be combined with other time series causal discovery algorithms and can be of considerable use in many real-world applications.

We present Cadence, an error-bounded lossy compressor for numeric time series pairing a 330M-parameter time-series foundation model (Google TimesFM-3) with an adaptive arithmetic coder, guaranteeing |x_t-x_t|leτ on every sample. One negative result constrains the design space: for lossless coding a foundation model is worth nothing, because bits saved are logarithmic in predictor accuracy, Δb=log_2(MAE_{old}/MAE_{new}). So the 1.51times advantage TimesFM-3 holds over a 32-tap linear predictor buys 0.60 bits of 20.28, a median gain of +0.03%. Error-bounded coding escapes this at one point: once a forecast lands inside the band the residual index is zero and the sample nearly free. Cadence contributes: (1) an adaptive range coder with context-modelled binarization, beating xz/zstd on real indices by 9.7% (15/15) and reversing a finding from a general-purpose back end; (2) a determinism result -- predictions are not bit-identical across batch sizes, and no PyTorch configuration repairs this, forcing group size and execution device into the container format; and (3) domain localization on corpora postdating any plausible training cutoff. On 49 EIA-930 balancing-authority demand series (2026) Cadence gains 13.3% over the best of six classical predictors, and 28.3% on 50 MTA ridership series (2026): 21.4% median over 297 series-tolerance pairs, winning all 297. Against downsampling, what time-series databases deploy for retention, its guaranteed worst-case error is 28--56times tighter at equal size. End-to-end, once the context bootstrap is paid for, gains run from 6.8% at six months of hourly data to 15.1% asymptotically. Attempting to falsify the domain claim on SDRBench, theory predicts failure and delivers: -0.8% median, 0 of 27 pairs gaining. Three further negative results and eight retracted claims are reported in full.

We introduce IndiaFinBench, to our knowledge the first publicly available evaluation benchmark for assessing large language model (LLM) performance on Indian financial regulatory text. Existing financial NLP benchmarks draw exclusively from Western financial corpora (SEC filings, US earnings reports, and English-language financial news), leaving a significant gap in coverage of non-Western regulatory frameworks. IndiaFinBench addresses this gap with 406 expert-annotated question-answer pairs drawn from 192 documents sourced from the Securities and Exchange Board of India (SEBI) and the Reserve Bank of India (RBI), spanning four task types: regulatory interpretation (174 items), numerical reasoning (92 items), contradiction detection (62 items), and temporal reasoning (78 items). Annotation quality is validated through a model-based secondary pass (kappa=0.918 on contradiction detection) and a 60-item human inter-annotator agreement evaluation (kappa=0.611; 76.7% overall agreement). We evaluate twelve models under zero-shot conditions, with accuracy ranging from 70.4% (Gemma 4 E4B) to 89.7% (Gemini 2.5 Flash). All models substantially outperform a non-specialist human baseline of 60.0%. Numerical reasoning is the most discriminative task, with a 35.9 percentage-point spread across models. Bootstrap significance testing (10,000 resamples) reveals three statistically distinct performance tiers. The dataset, evaluation code, and all model outputs are available at https://github.com/rajveerpall/IndiaFinBench

We propose a computationally efficient inferential procedure for longitudinal function-on-function regression. The method follows a marginal three-step approach: (1) fit massive pointwise longitudinal scalar-on-function regression models, (2) smooth the resulting estimates along the bivariate functional domain, and (3) compute confidence bands using either an analytic approach for Gaussian data or a cluster bootstrap for Gaussian or non-Gaussian data. Simulation studies demonstrate that the proposed method achieves accurate estimation and valid inference, while substantially reducing computational burden compared to existing approaches. Methods are motivated by a physical activity intervention trial in older adults where high-dimensional wearable data were collected longitudinally across multiple visits. Our applications reveal significant increases in physical activity in the morning using interpersonal intervention strategies, but not intrapersonal strategies. The proposed methods are implemented in an R package.

Large linear systems play an important role in high-energy theory, appearing in amplitude bootstraps and during integral reduction. This paper introduces FiniteFieldSolve, a general-purpose toolkit for exactly solving large linear systems over the rationals. The solver interfaces directly with Mathematica, is straightforward to install, and seamlessly replaces Mathematica's native solvers. In testing, FiniteFieldSolve is approximately two orders of magnitude faster than Mathematica and uses an order of magnitude less memory. The package also compares favorably against other public solvers in FiniteFieldSolve's intended use cases. As the name of the package suggests, solutions are obtained via well-known finite field methods. These methods suffer from introducing an inordinate number of modulo (or integer division) operations with respect to different primes. By automatically recompiling itself for each prime, FiniteFieldSolve converts the division operations into much faster combinations of instructions, dramatically improving performance. The technique of compiling the prime can be applied to any finite field solver, where the time savings will be solver dependent. The operation of the package is illustrated through a detailed example of an amplitude bootstrap.

Code generated by large language models passes security checks at a rate that has barely moved in four years. In regulated backends, the defect classes that matter most are money arithmetic, time handling, retry safety, and access control. Teams answer with instruction files, yet the largest controlled study of instruction files to date found no benefit. This paper tests a narrower idea: generated code improves when the prompt carries a specification, a fixed preamble stating what must be true of the result. We pre-registered hypotheses, refuters, analysis code, and a one-shot generation rule, then ran 50 realistic backend tasks from finance, healthcare, and insurance practice through five frontier models from five vendor lineages, each task twice: bare, and preceded by a 267-word filled specification frame. Nine deterministic AST-based checkers scored the outputs. The Bandit security scanner, which knows nothing of the frame, scored them independently. The frame reduced defects in all five models (mean reduction 0.16 to 0.70 findings per task, every Holm-adjusted sign test significant, every bootstrap confidence interval excluding zero). Where the arms differed, the frame arm won 95 of 100 times. It never made any model worse in any domain. Bandit found 53 medium-or-high issues in the bare arm and 11 in the frame arm, in the same direction for every model. The effect was largest where a model's unprompted defaults were weakest: the frame supplies the discipline a model lacks. All 500 outputs, prompts, checkers, scoring code, and the pre-registration are published with a DOI, so any team can re-derive the result without trusting the author.

We argue that BF theory with SO(d+1,1) gauge group provides a SymTFT ''skeleton'' for building AdS_{d+1}/CFT_d pairs via gluing consistency as the bootstrap principle, loosely analogous to how compact Chern-Simons theory is a TQFT skeleton for rational CFTs. This is a non-perturbative bulk framework for quantum gravity. The bootstrap is formulated as presentation independence of physical amplitudes within a universal, defect-closed BF sewing calculus, which includes Wilson lines, codimension-two monodromy defects, and their junctions. The flat BF connection encodes the conformal geometry of the boundary, while Wilson-line path integrals construct candidate quantum-gravity microstates and charge sectors. When the bootstrapped spectrum has a stress tensor, Ward identities naturally connect it to the B-field, a relation we call generalized simplicity. In large-N, large-gap regimes admitting a gravitational EFT, this motivates the introduction of an effective notion of the B-field. In the Einstein limit, this becomes the ''simplicity'' relation used in spin-foam models. Conventional spin-foam models try to obtain gravity by constraining BF theory. We suggest instead that BF theory is the Platonic sewing skeleton, from which theories are to be bootstrapped. Despite the topological nature of the skeleton, perturbative local bulk fields can emerge via Wilson-towers of multi-trace primaries, reproducing their one-loop determinants. We note that the BF Fourier kernel is a suggestive higher-dimensional analogue of the modular-S structure. Because the bulk gluing principle in itself does not require a boundary description, the framework is conceptually broader than AdS/CFT. We sketch how de Sitter space may fit into this picture, with a natural role for observers. Our approach elevates gluing consistency to a universal bulk principle underlying theories of quantum gravity.

Evaluating large language models at scale remains a practical bottleneck for many organizations. While existing evaluation frameworks work well for thousands of examples, they struggle when datasets grow to hundreds of thousands or millions of samples. This scale is common when assessing model behavior across diverse domains or conducting comprehensive regression testing. We present Spark-LLM-Eval, a distributed evaluation framework built natively on Apache Spark. The system treats evaluation as a data-parallel problem, partitioningexamplesacrossexecutorsandaggregatingresultswithproperstatistical accounting. Beyond raw throughput, we emphasize statistical rigor: every reported metric includes bootstrap confidence intervals, and model comparisons come with appropriate significance tests (paired t-tests, McNemar's test, or Wilcoxon signed-rank, depending on the metric type). The framework also addresses the cost problem inherent in LLM evaluation through content-addressable response caching backed by Delta Lake, which allows iterating on metric definitions without re-running inference. We describe the system architecture, the statistical methodology, and report benchmark results showing linear scaling with cluster size. The framework and all evaluation code are available as open source.

Monitoring machine learning models once they are deployed is challenging. It is even more challenging to decide when to retrain models in real-case scenarios when labeled data is beyond reach, and monitoring performance metrics becomes unfeasible. In this work, we use non-parametric bootstrapped uncertainty estimates and SHAP values to provide explainable uncertainty estimation as a technique that aims to monitor the deterioration of machine learning models in deployment environments, as well as determine the source of model deterioration when target labels are not available. Classical methods are purely aimed at detecting distribution shift, which can lead to false positives in the sense that the model has not deteriorated despite a shift in the data distribution. To estimate model uncertainty we construct prediction intervals using a novel bootstrap method, which improves upon the work of Kumar & Srivastava (2012). We show that both our model deterioration detection system as well as our uncertainty estimation method achieve better performance than the current state-of-the-art. Finally, we use explainable AI techniques to gain an understanding of the drivers of model deterioration. We release an open source Python package, doubt, which implements our proposed methods, as well as the code used to reproduce our experiments.

Although diffusion models (DMs) have shown promising performances in a number of tasks (e.g., speech synthesis and image generation), they might suffer from error propagation because of their sequential structure. However, this is not certain because some sequential models, such as Conditional Random Field (CRF), are free from this problem. To address this issue, we develop a theoretical framework to mathematically formulate error propagation in the architecture of DMs, The framework contains three elements, including modular error, cumulative error, and propagation equation. The modular and cumulative errors are related by the equation, which interprets that DMs are indeed affected by error propagation. Our theoretical study also suggests that the cumulative error is closely related to the generation quality of DMs. Based on this finding, we apply the cumulative error as a regularization term to reduce error propagation. Because the term is computationally intractable, we derive its upper bound and design a bootstrap algorithm to efficiently estimate the bound for optimization. We have conducted extensive experiments on multiple image datasets, showing that our proposed regularization reduces error propagation, significantly improves vanilla DMs, and outperforms previous baselines.

We extend molecular bootstrap embedding to make it appropriate for implementation on a quantum computer. This enables solution of the electronic structure problem of a large molecule as an optimization problem for a composite Lagrangian governing fragments of the total system, in such a way that fragment solutions can harness the capabilities of quantum computers. By employing state-of-art quantum subroutines including the quantum SWAP test and quantum amplitude amplification, we show how a quadratic speedup can be obtained over the classical algorithm, in principle. Utilization of quantum computation also allows the algorithm to match -- at little additional computational cost -- full density matrices at fragment boundaries, instead of being limited to 1-RDMs. Current quantum computers are small, but quantum bootstrap embedding provides a potentially generalizable strategy for harnessing such small machines through quantum fragment matching.

Scientific coding agents receive equations, boundary conditions, and output requirements in writing, then must assess the programs they revise. Rules to Tools (R2T) supplies prepared executable checks of public scientific requirements. Matched SciCode repair groups share written checks, starting programs, model, and budgets; the tool group receives a callable implementation. Across two task-ID cohorts, complete repair is 26/30 with text and 29/30 with the prepared checks. Three task IDs favor tools, one favors text, and eleven tie. The eight-ID cohort scores 13/16 versus 15/16, with a task-cluster bootstrap 95% interval of [-12.5, 43.75] percentage points for the difference. The larger shared-definition SciCode cohort ties at 13/24 per group. Five development-exposed tasks with alternate starting programs score 3/10 versus 7/10. The tool group favors tasks 17, 77, and 11; initial checks flag task 17 and report no violation for tasks 77 and 11. Task 37 favors text and has no initial reported violation. A fresh source-through-Python arm also reaches 15/16, matching the dedicated command's aggregate. In a matched PDE comparison, detailed text scores 23/24 and checks score 24/24, with 31.2% lower reported model output for checks. Agent-side output savings vary by cohort, while public CPU use rises in both task-ID cohorts. These results measure task-dependent repair outcomes and agent-side costs with prepared checks.

Bootstrap aggregating (bagging) is an effective ensemble protocol, which is believed can enhance robustness by its majority voting mechanism. Recent works further prove the sample-wise robustness certificates for certain forms of bagging (e.g. partition aggregation). Beyond these particular forms, in this paper, we propose the first collective certification for general bagging to compute the tight robustness against the global poisoning attack. Specifically, we compute the maximum number of simultaneously changed predictions via solving a binary integer linear programming (BILP) problem. Then we analyze the robustness of vanilla bagging and give the upper bound of the tolerable poison budget. Based on this analysis, we propose hash bagging to improve the robustness of vanilla bagging almost for free. This is achieved by modifying the random subsampling in vanilla bagging to a hash-based deterministic subsampling, as a way of controlling the influence scope for each poisoning sample universally. Our extensive experiments show the notable advantage in terms of applicability and robustness.

Diffusion models have demonstrated excellent potential for generating diverse images. However, their performance often suffers from slow generation due to iterative denoising. Knowledge distillation has been recently proposed as a remedy that can reduce the number of inference steps to one or a few without significant quality degradation. However, existing distillation methods either require significant amounts of offline computation for generating synthetic training data from the teacher model or need to perform expensive online learning with the help of real data. In this work, we present a novel technique called BOOT, that overcomes these limitations with an efficient data-free distillation algorithm. The core idea is to learn a time-conditioned model that predicts the output of a pre-trained diffusion model teacher given any time step. Such a model can be efficiently trained based on bootstrapping from two consecutive sampled steps. Furthermore, our method can be easily adapted to large-scale text-to-image diffusion models, which are challenging for conventional methods given the fact that the training sets are often large and difficult to access. We demonstrate the effectiveness of our approach on several benchmark datasets in the DDIM setting, achieving comparable generation quality while being orders of magnitude faster than the diffusion teacher. The text-to-image results show that the proposed approach is able to handle highly complex distributions, shedding light on more efficient generative modeling.

Scaling laws predict loss from compute but not how capabilities interact. We measure the coupling between reasoning and truthfulness across 63 base models from 16 families and find a regime change invisible to loss curves: below a family-dependent critical scale N_c, capabilities anticorrelate; above it, they cooperate. N_c approx 3.5B parameters [2.9B, 13.4B] (bootstrap 95% CI), but model size is not the only variable that determines phase. Architecture, data curation, and training recipe each shift N_c independently: curated training eliminated the coupling dip between Qwen generations (0.025 to 0.830 at matched scale), Gemma-4 at 4B achieves coupling 0.871, characteristic of 13B+ standard-trained models, through distillation and architectural innovation, and Phi at 1B matches web-trained coupling at 10B through data curation alone. Width normalization eliminates the anticorrelation across all tested families, supporting an output-projection bottleneck. Internally, 38 of 40 models show zero competing attention heads. A sparse-regression ODE cross-predicts held-out Llama-2 at 5.6% error. The diagnostic requires no model internals -- only public benchmark scores across a model family. The cooperative regime extends to the frontier (r = +0.72, 34 models, 10 labs). Code, data, and an open-source activation-steering tool for any open-weight model are released alongside an interactive dashboard that diagnoses any model's coupling phase, suggests concrete interventions (data curation, width, benchmark rotation), and provides ODE scaling predictions, frontier diagnostics, and eigenstructure analysis: https://zehenlabs.com/cape/.

We report that model quantisation restructures domain-level metacognitive efficiency in LLMs rather than degrading it uniformly. Evaluating Llama-3-8B-Instruct on the same 3,000 questions at Q5_K_M and f16 precision, we find that M-ratio profiles across four knowledge domains are uncorrelated between formats (Spearman rho = 0.00). Arts & Literature moves from worst-monitored (M-ratio = 0.606 at Q5_K_M) to best-monitored (1.542 at f16). Geography moves from well-monitored (1.210) to under-monitored (0.798). However, Type-2 AUROC profiles are perfectly stable across formats (rho = 1.00), localising the restructuring to the M-ratio normalisation rather than the underlying discrimination signal. This finding emerged from a pre-registered attempt to improve metacognition through domain-conditional training. We prescribed confidence-amplification SFT for the diagnosed weak domain, with matched-budget agnostic and wrong-prescription controls. All four confirmatory hypotheses were null (10,000 bootstrap resamples, seed = 42). The training successfully reshaped confidence distributions, doubling the NLP gap in Science from 0.076 to 0.152, but did not improve meta-d' because the diagnostic profile did not transfer across formats. Any system relying on domain-level M-ratio profiles has an unexamined dependency on inference format. Systems using AUROC_2 are safer. We release all code, pre-registrations, and trial-level data.

Red supergiants (RSGs), as the descendants of OB-type stars and the progenitors of supernovae, provide crucial insights into the evolution of massive stars, particularly in binary systems. Previous studies show that the binary fraction of RSGs (approx 15% - 40%) is significantly lower than that of their predecessors (approx 50% - 70%). In this work, we investigate the binary fraction of RSGs with the recently selected largest samples of 4695 and 2097 RSGs in the Large Magellanic Cloud (LMC) and Small Magellanic Cloud (SMC), respectively. The binary system with a hot companion (O-, B- and A-type star) is identified by detecting the ultraviolet (UV) excess in the observed spectral energy distribution (SED) ranging from ultraviolet to mid-infrared after subtracting the model SED of RSG since RSGs are very weak in the UV band. It is found that the lower limit of binarity is 30.2% pm 0.7% and 32.2% pm 1% in the LMC and SMC, respectively. If the sample is limited to luminous RSGs with log L/L_{odot} > 4.0, the binary fraction becomes 26.6% pm 1.1% and 26.4% pm 1.7% in the LMC and SMC, respectively. The derived binary fraction is valid in the range of sim 2.3 < log P / [d] < sim 8. Our study suggests that roughly one-third of massive stars host a third companion within sim 30,000 AU. In addition, 15 RSGs are also identified as binary via HST/STIS spectra, and a handful of the binaries identified by the SED fitting are confirmed by their light curve and radial velocity dispersion. The stellar parameters of the companions, i.e. T_{eff}, R, L and log g, are calculated by model fitting.

Self-consistency has emerged as a popular technique for improving large language model accuracy on reasoning tasks. The approach is straightforward: generate multiple reasoning paths and select the most common answer through majority voting. While this reliably boosts accuracy, it remains unclear whether these gains reflect genuine improvements in reasoning quality. We investigate a fundamental question that has not been studied before: does inference scaling improve reasoning faithfulness? We conduct a comprehensive empirical study across four frontier models (GPT-5.2, Claude Opus 4.5, Gemini-3-flash-preview, and DeepSeek-v3.2) on 100 GSM8K mathematical reasoning problems. Our analysis employs bootstrap confidence intervals, McNemar's tests for paired comparisons, and Cohen's d effect sizes to quantify the effects rigorously. The results reveal striking differences across models that challenge common assumptions about self-consistency. GPT-5.2 shows the expected pattern: accuracy improves from 78% to 90% at N=5, with faithfulness remaining relatively stable (0.540 to 0.510). Claude Opus 4.5 tells a completely different story. Its accuracy actually drops from 78% to 74.3% while faithfulness jumps dramatically from 0.270 to 0.891 at N=5. DeepSeek-v3.2, already at 98% accuracy, shows ceiling effects with modest faithfulness gains (0.440 to 0.541). Gemini-3-flash improves from 81% to 86% accuracy with a slight faithfulness decrease (0.260 to 0.212). Problem difficulty analysis reveals that GPT-5.2 solves 82% of hard problems while breaking only 13% of easy ones. Claude, in contrast, breaks 23% of easy problems, explaining its accuracy decrease. These findings matter for practitioners: self-consistency is not universally beneficial, and teams should test their specific models before deployment. We release our code and provide practical recommendations for navigating these tradeoffs.

In this work, we derive sharp non-asymptotic deviation bounds for weighted sums of Dirichlet random variables. These bounds are based on a novel integral representation of the density of a weighted Dirichlet sum. This representation allows us to obtain a Gaussian-like approximation for the sum distribution using geometry and complex analysis methods. Our results generalize similar bounds for the Beta distribution obtained in the seminal paper Alfers and Dinges [1984]. Additionally, our results can be considered a sharp non-asymptotic version of the inverse of Sanov's theorem studied by Ganesh and O'Connell [1999] in the Bayesian setting. Based on these results, we derive new deviation bounds for the Dirichlet process posterior means with application to Bayesian bootstrap. Finally, we apply our estimates to the analysis of the Multinomial Thompson Sampling (TS) algorithm in multi-armed bandits and significantly sharpen the existing regret bounds by making them independent of the size of the arms distribution support.

Text embeddings for Portuguese have no dedicated benchmark: evaluation rests on translated corpora such as English MS MARCO or on thin multilingual coverage, with native tasks scattered and unconsolidated. We introduce MTEB-PT, a benchmark of 22 native Brazilian-Portuguese tasks across seven categories (classification, multilabel classification, pair classification, semantic textual similarity, clustering, retrieval, and reranking), admitting only data created or found in Portuguese and excluding translations by construction. We evaluate 93 models spanning 23M to 27B parameters: 73 open-weight and 20 closed commercial APIs. Alongside the leaderboard we report a statistical layer for every headline comparison: per-task bootstrap confidence intervals, paired-bootstrap significance, a task- and instance-level discrimination analysis (how sharply each task separates models) adapted from Item Response Theory, and a cross-leaderboard correlation. Three findings stand out. The benchmark cleanly separates about a dozen tiers of models, though the top six are statistically too close to order. An openly licensed, self-hostable model reaches that leading tier, so strong Portuguese embedding quality does not require a commercial API. And a model's rank on the global multilingual leaderboard predicts its Portuguese rank only moderately (Spearman rho = 0.75 over 55 shared models; one model ranks 3rd there and 49th here), so a native benchmark measures something the multilingual boards do not. We release every task, our code, and a public leaderboard, so practitioners can choose Portuguese embedding models on native evidence.

Evaluations of LLM systems routinely average over small prompt sets and report models as a ranked table. We ask how much confidence such a table deserves, using LLM-based prompt-structure inference as the case study: eight open model variants across five families and 8B to 675B parameters, caching disabled, 293 raw intermediate representations persisted. The measured phenomenon is unstable to begin with. Identical calls do not reliably recover identical structure, with mean node-set Jaccard from 0.39 to 0.96 and 72% of prompt-model cells never node-set-perfect. Auditing the evaluation weakens its conclusions further, and this is our main contribution. Under a joint cluster bootstrap over prompts, only the bottom of the ranking is firm: the two least reproducible models hold rank in 99% and 86% of replicates, the middle four in 27% to 48%, and the top two in 68% each, so the table identifies the worst model reliably but does not reliably identify the best. Two equally defensible rules for merging repeated campaigns change four of eight rows and move the study-wide headline by 7 percentage points. Checking the inferred structure against ground-truth annotations shows reproducibility cannot be read as accuracy. And four of the eight endpoints were withdrawn within ten weeks of measurement, so the study as specified can no longer be run. Small-sample LLM evaluations can therefore look far more definitive than their evidence supports. We recommend reporting rank stability, per-cell provenance, executed sensitivity comparisons, raw per-run outputs, and a measurement date alongside any ranking.

Knowledge benchmarks for LLMs face three issues: scaling-driven designs that do not operationalize disciplinary representativeness; flat-payment annotation that permits lazy consensus; and unaudited ranking instability under bounded test budgets. We introduce KINA, an 899-item benchmark across 261 fine-grained disciplines, with two formal results. First, we cast representativeness as a coverage-style objective over expert-elicited anchors and operationalize disciplinary representativeness through a proxy, yielding a (1-1/e) greedy approximation (Proposition 1); the guarantee applies to the proxy, not to population representativeness. Second, we prove a bonus-on-bar tournament weakly FOSD-dominates flat payment in released-review quality, with incentive-compatibility threshold B > Delta C / Delta p_min (Theorem 1). Evaluating 42 models from 13 labs, the top model, Gemini-3.1-Pro-Preview, reaches 53.17%, followed by Claude-Opus-4.6 at 49.92% and GPT-5.4 at 48.55%, leaving substantial headroom below saturation. The full leaderboard shows a tiered structure rather than a smooth total order: a small frontier tier lies above 48%, a dense strong-model tier spans roughly 38-45%, and low-performing models remain only modestly above the 10% chance baseline. Tool augmentation adds up to 5.17 points across the five tool-use evaluations, with gains varying substantially across models. We report bootstrap ranking-stability statistics to make bounded-budget variance explicit and to discourage over-interpretation of adjacent ranks.

Language models for program synthesis are usually trained and evaluated on programming competition datasets (MBPP, APPS). However, these datasets are limited in size and quality, while these language models are extremely data hungry. Additionally, the language models have a misaligned program synthesis process compared to humans. While humans iteratively develop code with the help of a compiler, most program synthesis models currently produce code in one go. To solve these issues, we introduce a bootstrapping algorithm for program synthesis, that supports teaching models how to repair. We show that bootstrapping consistently outperforms regular fine-tuning. Compared to other work, our bootstrapped model performs on par with fine-tuned models that are 68\% larger. Notably, bootstrapping with repairing also improves non-repairing performance compared to regular bootstrapping during inference. However, on our models, repairing during inference is likely inferior to simply sampling the same number of solutions. Furthermore, we find that there are issues with the example test cases in the training portion of the APPS dataset that are valuable to the community, as many repairing and reinforcement learning methods rely on them.

Aggregate metacognitive quality scores mask within-model variation across MMLU benchmark domains. We administered 1,500 MMLU items (250 per domain, under an a priori six-domain grouping) to 33 frontier LLMs from eight model families and computed Type-2 AUROC per model-domain cell using verbalized confidence (0-100). Total observations: 47,151. Every model with above-chance aggregate monitoring showed non-trivial domain-level variation. Applied/Professional knowledge was reliably the easiest benchmark domain to monitor (mean AUROC = .742, ranked top-2 in 21 of 33 models); Formal Reasoning and Natural Science were reliably the hardest (one of the two ranked bottom-2 in 27 of 33 models). The three middle domains were statistically indistinguishable (Kendall's W = .164). A subject-level coherence analysis (within-domain similarity ratio = 0.95) confirms the six-domain grouping is a pragmatic benchmark taxonomy, not a validated latent construct. Within-family profile-shape clustering is significant for Anthropic, Google-Gemini, and Qwen (permutation p < .0001) but not DeepSeek, Google-Gemma, or OpenAI. Gemma 4 31B showed a +.202 AUROC improvement over Gemma 3 27B. Three models classified Invalid on binary KEEP/WITHDRAW probes produced normal profiles under verbalized confidence, confirming probe-format specificity. Bootstrap 95% CIs on 198 cells have median width .199. Split-half aggregate stability r = .893; profile-level split-half is weaker (grand median r = .184). These results show stable benchmark-domain variation obscured by aggregate metrics, and support benchmark-stage domain screening as a step before deployment in specific application areas.

The economic value of inference depends on how capacity and task information are distributed across stages of AI production. We study these organizational margins using controlled workflow experiments on externally verified software-engineering tasks. In two matched resource panels, direct execution records the same success rate of 59.6 percent at logical-token ceilings of 12,000 and 24,000, while success under information-constrained planning rises from 36.2 to 51.2 percent. The planning disadvantage narrows by 15.0 percentage points (95 percent task-cluster bootstrap interval: 4.2 to 25.8). A strict read-only planning campaign varies whether the planner sees the task issue. At 12,000 tokens, issue access raises success by about 16 percentage points over issue-hidden planning. Compared with direct execution, task-informed planning is about 10 points lower at 12,000 tokens; at 24,000 tokens, it shows a 29.6-point advantage. In the resource panels, direct execution uses substantially less than either ceiling, while the planning workflow's binding rate falls from 46.2 to 0.8 percent and downstream execution accounts for 89.9 percent of the increase in total use. Scale determines the capacity available to a system; workflow and information structure shape the productive value

Large language models (LLMs) have pushed the limits of natural language understanding and exhibited excellent problem-solving ability. Despite the great success, most existing open-source LLMs (\eg, LLaMA-2) are still far away from satisfactory for solving mathematical problem due to the complex reasoning procedures. To bridge this gap, we propose MetaMath, a fine-tuned language model that specializes in mathematical reasoning. Specifically, we start by bootstrapping mathematical questions by rewriting the question from multiple perspectives without extra knowledge, which results in a new dataset called {MetaMathQA}. Then we fine-tune the LLaMA-2 models on MetaMathQA. Experimental results on two popular benchmarks (\ie, GSM8K and MATH) for mathematical reasoning demonstrate that MetaMath outperforms a suite of open-source LLMs by a significant margin. Our MetaMath-7B model achieves 66.4% on GSM8K and 19.4% on MATH, exceeding the state-of-the-art models of the same size by 11.5% and 8.7%. Particularly, {MetaMath-70B} achieves an accuracy of 82.3% on {GSM8K}, slightly better than {GPT-3.5-Turbo}. We release the {MetaMathQA} dataset, the {MetaMath} models with different model sizes and the training code for public use.

Conformal prediction is a technique for constructing prediction intervals that attain valid coverage in finite samples, without making distributional assumptions. Despite this appeal, existing conformal methods can be unnecessarily conservative because they form intervals of constant or weakly varying length across the input space. In this paper we propose a new method that is fully adaptive to heteroscedasticity. It combines conformal prediction with classical quantile regression, inheriting the advantages of both. We establish a theoretical guarantee of valid coverage, supplemented by extensive experiments on popular regression datasets. We compare the efficiency of conformalized quantile regression to other conformal methods, showing that our method tends to produce shorter intervals.

The perturbative QCD corrections to the hadronic decay width of the W boson are currently known up to next-to-next-to-next-to-next-to-leading order (N^4LO), whereas the exact N^5LO correction remains unavailable owing to its formidable computational complexity. In this work, we estimate the N^5LO contributions by adopting Bayesian analysis (BA). Before performing the estimation, the Principle of Maximum Conformality (PMC) is employed to improve the precision of the initial scale-dependent perturbative series. Through recursive application of the renormalization group equation, non-conformal terms are absorbed into the strong running coupling, yielding a scheme-independent, scale-invariant perturbative series with improved convergence. The PMC procedure determines an effective coupling α_s(Q_*), with the PMC scale fixed as Q_* = 100.102~GeV at next-to-next-to-leading logarithmic accuracy. Based on the improved and more precise series, the 95.5% BA credible interval yields an uncertainty of Δδ_QCD|_{PMC, BA}^{N^5LO} = pm 1.0times 10^{-5}. The resulting hadronic branching ratio is B(Wto hadrons)|_PMC = (65.84pm 1.54)%, which is consistent with experimental data within reasonable errors.

Large language models trained on vast corpora inherently risk memorizing sensitive or harmful content, which may later resurface in their outputs. Prevailing unlearning methods generally rely on gradient ascent and its variants to lower the probability of specific target responses. However, we find that this strategy induces a critical side effect: probability mass is redistributed into high-likelihood regions, often corresponding to semantically related rephrasings of the targets. We refer to this as the squeezing effect, which explains why many methods yield merely spurious unlearning, a problem further obscured by automated metrics (e.g., ROUGE, truth ratio) that misreport actual success. To address this, we propose a bootstrapping (BS) framework that explicitly links the squeezing effect with the model's own high-confidence generations, namely its model beliefs. Since model beliefs inherently capture the very high-likelihood regions where probability mass is squeezed, incorporating them into the unlearning objective directly counters the squeezing effect. By jointly suppressing both target responses and model beliefs, BS-T (token) attenuates high-probability tokens, whereas BS-S (sequence) removes entire high-confidence generations, together achieving more thorough forgetting while preserving utility. Extensive experiments across diverse benchmarks with various model families confirm the effectiveness of our approach.

The asymptotic safety conjecture is examined for quantum gravity in four dimensions. Using the renormalisation group, we find evidence for an interacting UV fixed point for polynomial actions up to the 34th power in the Ricci scalar. The extrapolation to infinite polynomial order is given, and the self-consistency of the fixed point is established using a bootstrap test. All details of our analysis are provided. We also clarify further aspects such as stability, convergence, the role of boundary conditions, and a partial degeneracy of eigenvalues. Within this setting we find strong support for the conjecture.

Activation oracles aim to make the activations of other models legible to humans and yield promising results compared to white-box interpretability techniques. However, uncertainty quantification (UQ) for the natural-language outputs of such activation oracles is so far understudied. Here, we investigate 6 different methods for estimating the confidence of activation oracles and evaluate how well-calibrated their confidence scores are. Our experiments on 6,000 samples per oracle (varying verbalizer and context prompts) reveal that bootstrap mode frequency is the best-calibrated method among those tested (ECE 5.7% vs. 25.5% for the answer-word log-probability on Qwen3-8B; 10.3% vs. 13.1% on Qwen3.6-27B), and that the log-prob baseline can serve as a fast triage signal at a fraction of the cost. Code and the patched trainer are available at https://github.com/federicotorrielli/probabilistic_activation_oracles.

We propose Heuristic Blending (HUBL), a simple performance-improving technique for a broad class of offline RL algorithms based on value bootstrapping. HUBL modifies the Bellman operators used in these algorithms, partially replacing the bootstrapped values with heuristic ones that are estimated with Monte-Carlo returns. For trajectories with higher returns, HUBL relies more on the heuristic values and less on bootstrapping; otherwise, it leans more heavily on bootstrapping. HUBL is very easy to combine with many existing offline RL implementations by relabeling the offline datasets with adjusted rewards and discount factors. We derive a theory that explains HUBL's effect on offline RL as reducing offline RL's complexity and thus increasing its finite-sample performance. Furthermore, we empirically demonstrate that HUBL consistently improves the policy quality of four state-of-the-art bootstrapping-based offline RL algorithms (ATAC, CQL, TD3+BC, and IQL), by 9% on average over 27 datasets of the D4RL and Meta-World benchmarks.

We audit the multimodal-physics evaluation pipeline end-to-end and document three undetected construction practices that distort how the field measures vision-language reasoning: train-eval contamination, translation drift, and MCQ saturation. (1) Public training pools (UGPhysics-Train, SciInstruct, MMK12) pass single-stage 5-gram-Jaccard audits with zero hits across all six public physics evals; a three-stage audit (Jaccard -> mxbai-embed-large cosine -> Haiku-4.5 LLM-judge) surfaces 134 near-duplicates and 4,846 paraphrase candidates in SciInstruct alone. (2) A 17-pp Sonnet 4.5 delta on 59 paired Estonian-English olympiad problems (30.5% vs. 13.6%; sign test p=0.011, McNemar p=0.021, paired bootstrap 95% CI [+5.1, +28.9] pp). (3) A 46-pp format-and-novelty gradient on identical Sonnet weights between MCQ (79.7% on PhyX) and open-ended olympiad evaluation (33.4% on PhysOlym-A). We release four artifacts addressing these gaps: PhysCorp-A (6,432-record three-stage-audited multimodal corpus), PhysR1Corp (2,268-record closed-form RL pool), PhysOlym-A (500-problem, 99.8% novel-source held-out olympiad eval with native difficulty labels and an EN/ET bilingual subset), and Physics-R1, a reference GSPO+DAPO recipe cold-started from Qwen3-VL-8B-Thinking. Across 3 seeds, Physics-R1 lifts the audited corpus over the 8B base by +18.3 pp on PhysOlym-A liberal (8.0 -> 26.3 +/- 1.7; 7.1 pp behind Sonnet 4.5), +15.7 pp on PhysReason (23.9 -> 39.6 +/- 6.4; ahead of Qwen3-VL-32B and Gemini 2.5 Pro), +6.9 pp on OlympiadBench-Physics (46.2 +/- 1.5), and +4.1 pp on PhyX MCQ (77.8 +/- 0.3).

Microsimulation models used by ministries of finance and central banks rely on parametric processes for lifetime earnings that capture only first and second moments of the conditional distribution and miss long-range nonlinear structure. We propose SAGA, a decoder-only transformer for irregular tabular panel sequences, paired with a split conformal calibration wrapper that delivers individual-level prediction intervals with finite-sample marginal coverage guarantees. Trained on the longitudinal Swedish LISA register over 1990 to 2022, comprising 2,143,817 individuals and 61,284,903 person-years, the model forecasts annual labor earnings at horizons of one to thirty years and aggregates them by Monte Carlo into present-discounted lifetime earnings distributions. Against the canonical Guvenen, Karahan, Ozkan, and Song parametric process and tabular and recurrent baselines, SAGA reduces continuous ranked probability score by 31.9 percent at the ten-year horizon and mean absolute error by 37.7 percent at the twenty-year horizon. Conformal intervals achieve nominal coverage to within 0.4 percentage points marginally and within 2.4 percentage points on the worst-case demographic subgroup. The reconstructed lifetime earnings Gini coefficient is 0.327 against the partially observed truth of 0.341 and the GKOS estimate of 0.378. Model weights, calibration tables, and a synthetic equivalent dataset are released for replication outside the protected SCB MONA environment.

Despite being robust to small amounts of label noise, convolutional neural networks trained with stochastic gradient methods have been shown to easily fit random labels. When there are a mixture of correct and mislabelled targets, networks tend to fit the former before the latter. This suggests using a suitable two-component mixture model as an unsupervised generative model of sample loss values during training to allow online estimation of the probability that a sample is mislabelled. Specifically, we propose a beta mixture to estimate this probability and correct the loss by relying on the network prediction (the so-called bootstrapping loss). We further adapt mixup augmentation to drive our approach a step further. Experiments on CIFAR-10/100 and TinyImageNet demonstrate a robustness to label noise that substantially outperforms recent state-of-the-art. Source code is available at https://git.io/fjsvE

Bootstrap Your Own Latent (BYOL) is a self-supervised learning approach for image representation. From an augmented view of an image, BYOL trains an online network to predict a target network representation of a different augmented view of the same image. Unlike contrastive methods, BYOL does not explicitly use a repulsion term built from negative pairs in its training objective. Yet, it avoids collapse to a trivial, constant representation. Thus, it has recently been hypothesized that batch normalization (BN) is critical to prevent collapse in BYOL. Indeed, BN flows gradients across batch elements, and could leak information about negative views in the batch, which could act as an implicit negative (contrastive) term. However, we experimentally show that replacing BN with a batch-independent normalization scheme (namely, a combination of group normalization and weight standardization) achieves performance comparable to vanilla BYOL (73.9% vs. 74.3% top-1 accuracy under the linear evaluation protocol on ImageNet with ResNet-50). Our finding disproves the hypothesis that the use of batch statistics is a crucial ingredient for BYOL to learn useful representations.

The ROC curve is the major tool for assessing not only the performance but also the fairness properties of a similarity scoring function. In order to draw reliable conclusions based on empirical ROC analysis, accurately evaluating the uncertainty level related to statistical versions of the ROC curves of interest is absolutely necessary, especially for applications with considerable societal impact such as Face Recognition. In this article, we prove asymptotic guarantees for empirical ROC curves of similarity functions as well as for by-product metrics useful to assess fairness. We also explain that, because the false acceptance/rejection rates are of the form of U-statistics in the case of similarity scoring, the naive bootstrap approach may jeopardize the assessment procedure. A dedicated recentering technique must be used instead. Beyond the theoretical analysis carried out, various experiments using real face image datasets provide strong empirical evidence of the practical relevance of the methods promoted here, when applied to several ROC-based measures such as popular fairness metrics.

To examine whether collector-generated terminal labels on the pump.fun platform can be interpreted as platform-side graduation outcomes, and whether a pre-registered logistic association model generalises across a subsequent temporal holdout of the same cohort. A frozen primary cohort of 749,816 unique mints recorded by a V3 off-chain collector between 12 May 2026 and 10 June 2026 is analysed. The design combines a source-code and reconstructed-state measurement audit of the collector's terminal-classification mechanism with a pre-registered locked logistic association model fitted on a 15-day development cohort and evaluated on a subsequent 14-day validation cohort under the pre-registered stability-gate framework. Calendar-day cluster-robust covariance and day-block bootstrap procedures assess uncertainty. Development discrimination is high (AUROC 0.8594), but the model does not generalise to the held-out validation cohort (AUROC 0.4642; 500 of 500 successful bootstrap replicates; 95% percentile interval [0.4112, 0.5196] containing 0.5000). Validation calibration deteriorates substantially (slope 0.013, intercept +2.816); the market-cap functional form is not stable across pre-registered specifications; and of nine automated evaluations, two pass, six fail, and one is not evaluable. The collector's TIMEOUT label does not establish platform-side non-graduation. The paper treats outcome ascertainment as a first-order measurement problem rather than assuming that an off-chain collector's terminal classification measures the platform-side event. It pairs this audit with a pre-registered held-out temporal-generalisation test and reports the resulting negative finding as registered, alongside a fully reproducible correction history.

In a recent paper Juodis and Reese (2022) (JR) show that the application of the CD test proposed by Pesaran (2004) to residuals from panels with latent factors results in over-rejection. They propose a randomized test statistic to correct for over-rejection, and add a screening component to achieve power. This paper considers the same problem but from a different perspective, and shows that the standard CD test remains valid if the latent factors are weak in the sense the strength is less than half. In the case where latent factors are strong, we propose a bias-corrected version, CD*, which is shown to be asymptotically standard normal under the null of error cross-sectional independence and have power against network type alternatives. This result is shown to hold for pure latent factor models as well as for panel regression models with latent factors. The case where the errors are serially correlated is also considered. Small sample properties of the CD* test are investigated by Monte Carlo experiments and are shown to have the correct size for strong and weak factors as well as for Gaussian and non-Gaussian errors. In contrast, it is found that JR's test tends to over-reject in the case of panels with non-Gaussian errors, and has low power against spatial network alternatives. In an empirical application, using the CD* test, it is shown that there remains spatial error dependence in a panel data model for real house price changes across 377 Metropolitan Statistical Areas in the U.S., even after the effects of latent factors are filtered out.

Detailed profession-specific system prompts raise token use and estimated cost per response without a consistent accuracy gain. We evaluate Scientific Agents, an open-source corpus of 503 profession-specific AGENTS.md profiles, with Gemini 3.8 Flash via OpenRouter in the Pi agent harness. We compare matched profiles with four controls: a minimal baseline ("You are a helpful assistant"), the profile's opening role sentence, a generic scientific rigor guide, and a profile from an unrelated domain. Across nine text-based science benchmarks (4,531 sampled questions, 100 matched profiles), 4,488 items completed all five conditions after API-error retries, scored with automated, rule-based grading. The average profile-baseline accuracy difference is -0.6 percentage points (95% bootstrap interval [-1.5, +0.2] across fixed tasks), and no benchmark shows a statistically clear improvement. Matched profiles produced 1.5-2.3 times as many output tokens and cost 2.2-4.5 times more per successful call. On 60 tool-using BioMysteryBench bioinformatics problems (three runs each for baseline and profile), mean solve rates were 46.7% with the profile and 56.7% at baseline, a difference of -10.0 percentage points (95% interval [-16.7, -3.3]) driven by more frequent token- and time-limit stops under the profile. Longer prompts had one unexpected operational advantage: on SuperGPQA, frequent provider API drops left the short baseline with a correct first-pass answer on only 54.0% of items, against 71.6% with the profile. Generic and mismatched prompts were about as reliable, so this gain comes from prompt length or formatting rather than domain expertise. For the tested model and tasks, loading full profession profiles by default does not improve accuracy and costs considerably more; whether selective retrieval of profile sections or open-ended scientific tasks would change this remains to be tested.

Despite progress in image tokenization, standard methods encode redundant information by mixing all granularities within each token, thus redundancy persists between tokens. The mix of information of different granularity also complicates the training of generators. This paper introduces SelfBootTok, a method that resolves this by cleanly decomposing information into global and local token groups. Through self-bootstrapped learning, the model predicts local details exclusively from global tokens, shifting the burden of visual details from the generator to the tokenizer. Consequently, our generator is far more efficient, requiring only global tokens and reducing computation by approximately 40%, while delivering superior reconstruction and generation. Moreover, this paradigm scales elegantly: by leveraging more data or parameters to self-supervise local representation learning, SelfBootTok achieves a new state-of-the-art gFID score of 1.56 using only 64 tokens.

Algorithms such as Differentially Private SGD enable training machine learning models with formal privacy guarantees. However, there is a discrepancy between the protection that such algorithms guarantee in theory and the protection they afford in practice. An emerging strand of work empirically estimates the protection afforded by differentially private training as a confidence interval for the privacy budget varepsilon spent on training a model. Existing approaches derive confidence intervals for varepsilon from confidence intervals for the false positive and false negative rates of membership inference attacks. Unfortunately, obtaining narrow high-confidence intervals for epsilon using this method requires an impractically large sample size and training as many models as samples. We propose a novel Bayesian method that greatly reduces sample size, and adapt and validate a heuristic to draw more than one sample per trained model. Our Bayesian method exploits the hypothesis testing interpretation of differential privacy to obtain a posterior for varepsilon (not just a confidence interval) from the joint posterior of the false positive and false negative rates of membership inference attacks. For the same sample size and confidence, we derive confidence intervals for varepsilon around 40% narrower than prior work. The heuristic, which we adapt from label-only DP, can be used to further reduce the number of trained models needed to get enough samples by up to 2 orders of magnitude.

We propose a fully data-driven approach to designing mutual information (MI) estimators. Since any MI estimator is a function of the observed sample from two random variables, we parameterize this function with a neural network (MIST) and train it end-to-end to predict MI values. Training is performed on a large meta-dataset of 625,000 synthetic joint distributions with known ground-truth MI. To handle variable sample sizes and dimensions, we employ a two-dimensional attention scheme ensuring permutation invariance across input samples. To quantify uncertainty, we optimize a quantile regression loss, enabling the estimator to approximate the sampling distribution of MI rather than return a single point estimate. This research program departs from prior work by taking a fully empirical route, trading universal theoretical guarantees for flexibility and efficiency. Empirically, the learned estimators largely outperform classical baselines across sample sizes and dimensions, including on joint distributions unseen during training. The resulting quantile-based intervals are well-calibrated and more reliable than bootstrap-based confidence intervals, while inference is orders of magnitude faster than existing neural baselines. Beyond immediate empirical gains, this framework yields trainable, fully differentiable estimators that can be embedded into larger learning pipelines. Moreover, exploiting MI's invariance to invertible transformations, meta-datasets can be adapted to arbitrary data modalities via normalizing flows, enabling flexible training for diverse target meta-distributions.

Spectral clustering is a leading clustering method. Two of its major shortcomings are the disjoint optimization process and the limited representation capacity. To address these issues, we propose a deep spectral clustering model (named BootSC), which jointly learns all stages of spectral clustering -- affinity matrix construction, spectral embedding, and k-means clustering -- using a single network in an end-to-end manner. BootSC leverages effective and efficient optimal-transport-derived supervision to bootstrap the affinity matrix and the cluster assignment matrix. Moreover, a semantically-consistent orthogonal re-parameterization technique is introduced to orthogonalize spectral embeddings, significantly enhancing the discrimination capability. Experimental results indicate that BootSC achieves state-of-the-art clustering performance. For example, it accomplishes a notable 16\% NMI improvement over the runner-up method on the challenging ImageNet-Dogs dataset. Our code is available at https://github.com/spdj2271/BootSC.

Clinical decision-support systems are expert systems whose recommendations clinicians act on directly, yet they are usually cleared on one aggregate accuracy number from a held-out test set. That number says nothing about input reliability under encoding shifts, subgroup gaps, threshold sensitivity, or operational feasibility. We present RISED, a pre-deployment evaluation framework operationalising five dimensions (Reliability, Inclusivity, Sensitivity, Equity, Deployability) through BCa bootstrap 95% confidence intervals, literature-grounded thresholds, and Holm-Bonferroni-corrected PASS / FAIL / INCONCLUSIVE verdicts; Equity is a proxy-dependence diagnostic rather than a gating test. Applied to seven cohorts spanning 35 years (n from 303 to 99,492), RISED surfaces failures invisible to AUROC: on Diabetes 130, Reliability passes by three orders of magnitude (PSS = 0.0004) while Inclusivity (AUC parity gap = 0.262) and Sensitivity (max threshold-flip rate 49.1%) fail decisively; both NHIS cohorts reproduce this. NHANES 2021-2023, with a complete feature profile, achieves INCONCLUSIVE verdicts; BRFSS 2024 produces the suite's most severe Sensitivity failure (max threshold-flip rate 64.2%) after instrument rotation removed hypertension and cholesterol. The pattern recurs on credit- and income-prediction cohorts, confirming domain-agnosticity; a multi-model check shows the failures are data-driven, not model-specific. RISED ships as an open-source Python package complementing TRIPOD+AI, FUTURE-AI, and Fairlearn with the structured numerical evidence those standards require but do not prescribe.

The recently proposed SparseFormer architecture provides an alternative approach to visual understanding by utilizing a significantly lower number of visual tokens via adjusting RoIs, greatly reducing computational costs while still achieving promising performance. However, training SparseFormers from scratch is still expensive, and scaling up the number of parameters can be challenging. In this paper, we propose to bootstrap SparseFormers from ViT-based vision foundation models in a simple and efficient way. Since the majority of SparseFormer blocks are the standard transformer ones, we can inherit weights from large-scale pre-trained vision transformers and freeze them as much as possible. Therefore, we only need to train the SparseFormer-specific lightweight focusing transformer to adjust token RoIs and fine-tune a few early pre-trained blocks to align the final token representation. In such a way, we can bootstrap SparseFormer architectures from various large-scale pre-trained models (e.g., IN-21K pre-trained AugRegs or CLIPs) using a rather smaller amount of training samples (e.g., IN-1K) and without labels or captions within just a few hours. As a result, the bootstrapped unimodal SparseFormer (from AugReg-ViT-L/16-384) can reach 84.9% accuracy on IN-1K with only 49 tokens, and the multimodal SparseFormer from CLIPs also demonstrates notable zero-shot performance with highly reduced computational cost without seeing any caption during the bootstrapping procedure. In addition, CLIP-bootstrapped SparseFormers, which align the output space with language without seeing a word, can serve as efficient vision encoders in multimodal large language models. Code will be publicly available at https://github.com/showlab/sparseformer

Many applied problems contain signal that becomes clear only after combining multiple raw measurements. Ratios and rates are common examples. In gradient boosted trees, this combination is not an explicit operation: the model must synthesize it through coordinated splits on the component features. We study whether intra-tree column subsampling in XGBoost makes that synthesis harder. We use two synthetic data generating processes with cancellation-style structure. In both, two primitive features share a strong nuisance factor, while the target depends on a smaller differential factor. A log ratio cancels the nuisance and isolates the signal. We vary colsample_bylevel and colsample_bynode over s in {0.4, 0.6, 0.8, 0.9}, emphasizing mild subsampling (s >= 0.8). A control feature set includes the engineered ratio, removing the need for synthesis. Across both processes, intra-tree column subsampling reduces test PR-AUC in the primitives-only setting. In the main process the relative decrease reaches 54 percent when both parameters are set to 0.4. The effect largely disappears when the engineered ratio is present. A path-based co-usage metric drops in the same cells where performance deteriorates. Practically, if ratio-like structure is plausible, either avoid intra-tree subsampling or include the intended ratio features.

Accurate blind docking has the potential to lead to new biological breakthroughs, but for this promise to be realized, docking methods must generalize well across the proteome. Existing benchmarks, however, fail to rigorously assess generalizability. Therefore, we develop DockGen, a new benchmark based on the ligand-binding domains of proteins, and we show that existing machine learning-based docking models have very weak generalization abilities. We carefully analyze the scaling laws of ML-based docking and show that, by scaling data and model size, as well as integrating synthetic data strategies, we are able to significantly increase the generalization capacity and set new state-of-the-art performance across benchmarks. Further, we propose Confidence Bootstrapping, a new training paradigm that solely relies on the interaction between diffusion and confidence models and exploits the multi-resolution generation process of diffusion models. We demonstrate that Confidence Bootstrapping significantly improves the ability of ML-based docking methods to dock to unseen protein classes, edging closer to accurate and generalizable blind docking methods.

Response Surface Methodology (RSM) and desirability functions were employed in a case study to optimize the thermal and daylight performance of a computational model of a tropical housing typology. Specifically, this approach simultaneously optimized Indoor Overheating Hours (IOH) and Useful Daylight Illuminance (UDI) metrics through an Overall Desirability (D). The lack of significant association between IOH and other annual daylight metrics enabled a focused optimization of IOH and UDI. Each response required only 138 simulation runs (~30 hours for 276 runs) to determine the optimal values for passive strategies: window-to-wall ratio (WWR) and roof overhang depth across four orientations, totalling eight factors. First, initial screening based on 2_V^{8-2} fractional factorial design, identified four key factors using stepwise and Lasso regression, narrowed down to three: roof overhang depth on the south and west, WWR on the west, and WWR on the south. Then, RSM optimization yielded an optimal solution (roof overhang: 3.78 meters, west WWR: 3.76%, south WWR: 29.3%) with a D of 0.625 (IOH: 8.33%, UDI: 79.67%). Finally, robustness analysis with 1,000 bootstrap replications provided 95% confidence intervals for the optimal values. This study optimally balances thermal comfort and daylight with few experiments using a computationally-efficient multi-objective approach.