new

Get trending papers in your email inbox!

Subscribe

Daily Papers

byAK and the research community

Oct 22

Judging the Justification: Decision Certificate Supervision for Generative Reward Models

Generative reward models (GenRMs) generate natural language rationales to justify preference judgments, yet a correct verdict does not guarantee a sound justification. Existing approaches often rely on reference explanations to supervise rationales, but obtaining such references can be costly and does not necessarily establish whether generated rationales support the resulting verdict. To address these limitations, we propose DeCert, a framework that evaluates the validity and verdict consistency of generated rationales without requiring reference explanations. Crucially, DeCert translates these assessments into preference supervision that accounts for both verdict correctness and justification quality. In particular, when multiple sampled judgments share the same correct verdict, differences in certificate quality enable DeCert to construct rationale preference pairs that distinguish stronger from weaker justifications. Extensive empirical studies across two model families and multiple in- and out-of-distribution benchmarks demonstrate that DeCert consistently outperforms strong generative judge baselines while improving rationale quality. Moreover, DeCert effectively mitigates positional bias, improving position-consistent accuracy by up to 14.8 points. These results highlight the importance of supervising not only which verdict is correct, but also how that verdict is justified.

  • 4 authors
·
Oct 19

ImpossibleRubrics: Stress-Testing Generated Rubrics as Reward Signals

Language model-generated rubrics are increasingly used as reward signals for rubric-based reinforcement learning, LLM-as-a-judge evaluation, and automated grading. Such rubrics are reliable only if they reward honest answers over adversarial answers optimized to exploit them. Yet their robustness to such optimization remains poorly understood. We isolate the hardest regime: impossible tasks, where the prompt pressures the model toward an unsupported conclusion, so the only honest response is to acknowledge the impossibility. We introduce ImpossibleRubrics, a benchmark of 169 impossible tasks spanning six impossibility categories, each paired with a verifiable oracle certificate specifying what an honest answer may and may not claim, together with 48 answerable controls. Rather than providing fixed rubrics, ImpossibleRubrics provides task environments and certificates, allowing rubrics to be generated downstream and then adversarially tested for whether they reward certificate-violating answers. Eleven generators are exploited 8--26% of the time on the unbiased 150-of-169 environment cut; on a deliberately selected stress cut the strongest generator we measured is still exploited 36% while a certificate-faithful rubric is exploited 0%, so what we measure is a rubric-quality gap, not task impossibility. One result runs against intuition. A single generic rubric ("be decisive, penalize hedging") used unchanged for every task is exploited 64% of the time, and seven of the eleven generators are exploited more often than that while writing a rubric tailored to each one. The tailored criteria appear to tell an attacker which claim to fabricate. The problem is not that rubrics are vague; it is that they are specific about the wrong things.

  • 4 authors
·
Sep 14 2

Grading Handwritten Engineering Exams with Multimodal Large Language Models

Handwritten STEM exams capture open-ended reasoning and diagrams, but manual grading is slow and difficult to scale. We present an end-to-end workflow for grading scanned handwritten engineering quizzes with multimodal large language models (LLMs) that preserves the standard exam process (A4 paper, unconstrained student handwriting). The lecturer provides only a handwritten reference solution (100%) and a short set of grading rules; the reference is converted into a text-only summary that conditions grading without exposing the reference scan. Reliability is achieved through a multi-stage design with a format/presence check to prevent grading blank answers, an ensemble of independent graders, supervisor aggregation, and rigid templates with deterministic validation to produce auditable, machine-parseable reports. We evaluate the frozen pipeline in a clean-room protocol on a held-out real course quiz in Slovenian, including hand-drawn circuit schematics. With state-of-the-art backends (GPT-5.2 and Gemini-3 Pro), the full pipeline achieves approx8-point mean absolute difference to lecturer grades with low bias and an estimated manual-review trigger rate of approx17% at D_{max}=40. Ablations show that trivial prompting and removing the reference solution substantially degrade accuracy and introduce systematic over-grading, confirming that structured prompting and reference grounding are essential.

  • 4 authors
·
Jan 2

MedSkillAudit: A Domain-Specific Audit Framework for Medical Research Agent Skills

Background: Agent skills are increasingly deployed as modular, reusable capability units in AI agent systems. Medical research agent skills require safeguards beyond general-purpose evaluation, including scientific integrity, methodological validity, reproducibility, and boundary safety. This study developed and preliminarily evaluated a domain-specific audit framework for medical research agent skills, with a focus on reliability against expert review. Methods: We developed MedSkillAudit (skill-auditor@1.0), a layered framework assessing skill release readiness before deployment. We evaluated 75 skills across five medical research categories (15 per category). Two experts independently assigned a quality score (0-100), an ordinal release disposition (Production Ready / Limited Release / Beta Only / Reject), and a high-risk failure flag. System-expert agreement was quantified using ICC(2,1) and linearly weighted Cohen's kappa, benchmarked against the human inter-rater baseline. Results: The mean consensus quality score was 72.4 (SD = 13.0); 57.3% of skills fell below the Limited Release threshold. MedSkillAudit achieved ICC(2,1) = 0.449 (95% CI: 0.250-0.610), exceeding the human inter-rater ICC of 0.300. System-consensus score divergence (SD = 9.5) was smaller than inter-expert divergence (SD = 12.4), with no directional bias (Wilcoxon p = 0.613). Protocol Design showed the strongest category-level agreement (ICC = 0.551); Academic Writing showed a negative ICC (-0.567), reflecting a structural rubric-expert mismatch. Conclusions: Domain-specific pre-deployment audit may provide a practical foundation for governing medical research agent skills, complementing general-purpose quality checks with structured audit workflows tailored to scientific use cases.

AIPOCH-AI AIPOCH
·
Apr 21 2

QuRating: Selecting High-Quality Data for Training Language Models

Selecting high-quality pre-training data is important for creating capable language models, but existing methods rely on simple heuristics. We introduce QuRating, a method for selecting pre-training data that captures the abstract qualities of texts which humans intuitively perceive. In this paper, we investigate four qualities - writing style, required expertise, facts & trivia, and educational value. We find that LLMs are able to discern these qualities and observe that they are better at making pairwise judgments of texts than at rating the quality of a text directly. We train a QuRater model to learn scalar ratings from pairwise judgments, and use it to annotate a 260B training corpus with quality ratings for each of the four criteria. In our experiments, we select 30B tokens according to the different quality ratings and train 1.3B-parameter language models on the selected data. We find that it is important to balance quality and diversity, as selecting only the highest-rated documents leads to poor results. When we sample using quality ratings as logits over documents, our models achieve lower perplexity and stronger in-context learning performance than baselines. Beyond data selection, we use the quality ratings to construct a training curriculum which improves performance without changing the training dataset. We extensively analyze the quality ratings and discuss their characteristics, biases, and wider implications.

  • 4 authors
·
Feb 15, 2024

CCI4.0: A Bilingual Pretraining Dataset for Enhancing Reasoning in Large Language Models

We introduce CCI4.0, a large-scale bilingual pre-training dataset engineered for superior data quality and diverse human-like reasoning trajectory. CCI4.0 occupies roughly 35 TB of disk space and comprises two sub-datasets: CCI4.0-M2-Base and CCI4.0-M2-CoT. CCI4.0-M2-Base combines a 5.2 TB carefully curated Chinese web corpus, a 22.5 TB English subset from Nemotron-CC, and diverse sources from math, wiki, arxiv, and code. Although these data are mostly sourced from well-processed datasets, the quality standards of various domains are dynamic and require extensive expert experience and labor to process. So, we propose a novel pipeline justifying data quality mainly based on models through two-stage deduplication, multiclassifier quality scoring, and domain-aware fluency filtering. We extract 4.5 billion pieces of CoT(Chain-of-Thought) templates, named CCI4.0-M2-CoT. Differing from the distillation of CoT from larger models, our proposed staged CoT extraction exemplifies diverse reasoning patterns and significantly decreases the possibility of hallucination. Empirical evaluations demonstrate that LLMs pre-trained in CCI4.0 benefit from cleaner, more reliable training signals, yielding consistent improvements in downstream tasks, especially in math and code reflection tasks. Our results underscore the critical role of rigorous data curation and human thinking templates in advancing LLM performance, shedding some light on automatically processing pretraining corpora.

  • 9 authors
·
Jun 9, 2025 2

When No Benchmark Exists: Validating Comparative LLM Safety Scoring Without Ground-Truth Labels

Many deployments must compare candidate language models for safety before a labeled benchmark exists for the relevant language, sector, or regulatory regime. We formalize this setting as benchmarkless comparative safety scoring and specify the contract under which a scenario-based audit can be interpreted as deployment evidence. Scores are valid only under a fixed scenario pack, rubric, auditor, judge, sampling configuration, and rerun budget. Because no labels are available, we replace ground-truth agreement with an instrumental-validity chain: responsiveness to a controlled safe-versus-abliterated contrast, dominance of target-driven variance over auditor and judge artifacts, and stability across reruns. We instantiate the chain in SimpleAudit, a local-first scoring instrument, and validate it on a Norwegian safety pack. Safe and abliterated targets separate with AUROC values between 0.89 and 1.00, target identity is the dominant variance component (η^2 approx 0.52), and severity profiles stabilize by ten reruns. Applying the same chain to Petri shows that it admits both tools. The substantial differences arise upstream of the chain, in claim-contract enforcement and deployment fit. A Norwegian public-sector procurement case comparing Borealis and Gemma 3 demonstrates the resulting evidence in practice: the safer model depends on scenario category and risk measure. Consequently, scores, matched deltas, critical rates, uncertainty, and the auditor and judge used must be reported together rather than collapsed into a single ranking.

Equal Ranking Quality, Different Decisions: Measuring and Reducing Order Dependence in LLM Scorers

In passage reranking, response ranking and multi-document question answering, LLMs can score several candidate documents or responses together in one prompt, each still receiving its own score. Such scorers are selected on ranking quality, but their scores determine a decision: what a score threshold retains, a reader answers, or which chosen/rejected pair enters preference training. Because the candidates share that prompt, reordering them changes their scores. The same query over the same candidates should still yield the same decision. However, equal ranking quality does not imply equal decisions: on passage reranking, five trained scorers within 0.010 nDCG@10 retain sets that overlap by only 0.66-0.84 when reordered. No prompt-time change we test resolves that dependence: the only one that improves ranking quality does not measurably improve decision stability. We introduce order-consistency SFT (OC-SFT), which attenuates it in the weights by penalizing disagreement between a candidate's scores across orderings. It holds ranking quality and leads every decision-stability measure among trained scorers on all three tasks. It is also more stable on 12 base models than order-averaged distillation, which trains on labels averaged across permutations. One OC-SFT permutation retains sets that overlap more than ten averaged off-the-shelf permutations. A comparison of such scorers should therefore report what a threshold retains and a reader answers, not ranking quality alone. Code is available at https://github.com/thomsonreuters/presentation-dependence.

Biomed-Enriched: A Biomedical Dataset Enriched with LLMs for Pretraining and Extracting Rare and Hidden Content

We introduce Biomed-Enriched, a biomedical text dataset constructed from PubMed via a two-stage annotation process. In the first stage, a large language model annotates 400K paragraphs from PubMed scientific articles, assigning scores for their type (review, study, clinical case, other), domain (clinical, biomedical, other), and educational quality. The educational quality score (rated 1 to 5) estimates how useful a paragraph is for college-level learning. These annotations are then used to fine-tune a small language model, which propagates the labels across the full PMC-OA corpus. The resulting metadata allows us to extract refined subsets, including 2M clinical case paragraphs with over 450K high-quality ones from articles with commercial-use licenses, and to construct several variants via quality filtering and domain upsampling. Clinical text is typically difficult to access due to privacy constraints, as hospital records cannot be publicly shared. Hence, our dataset provides an alternative large-scale, openly available collection of clinical cases from PubMed, making it a valuable resource for biomedical and clinical NLP. Preliminary continual-pretraining experiments with OLMo2 suggest these curated subsets enable targeted improvements, with clinical upsampling boosting performance by ~5% on MMLU ProfMed and educational quality filtering improving MedQA and MedMCQA by ~1%. Combinations of these techniques led to faster convergence, reaching same performance with a third of training tokens, indicating potential for more efficient and effective biomedical pretraining strategies.

  • 3 authors
·
Jun 25, 2025 1

The Last Word Often Wins: A Format Confound in Chain-of-Thought Corruption Studies

Corruption studies, the primary tool for evaluating chain-of-thought (CoT) faithfulness, identify which chain positions are "computationally important" by measuring accuracy when steps are replaced with errors. We identify a systematic confound: for chains with explicit terminal answer statements, the dominant format in standard benchmarks, corruption studies detect where the answer text appears, not where computation occurs. A within-dataset format ablation provides the key evidence: on standard GSM8K chains ending with "the answer is X," removing only the answer statement, preserving all reasoning, collapses suffix sensitivity ~19x at 3B (N=300, p=0.022). Conflicting-answer experiments quantify the causal mechanism: at 7B, CC accuracy drops to near-zero (<=0.02) across five architecture families; the followed-wrong rate spans 0.63-1.00 at 3B-7B and attenuates at larger scales (0.300 at Phi-4-14B, ~0.01 at 32B). A within-stable 7B replication (9.3x attenuation, N=76, p=7.8e-3; Qwen3-8B N=299, p=0.004) provides converging evidence, and the pattern replicates on MATH (DeepSeek-R1-7B: 10.9x suffix-survival recovery). On chains without answer suffixes the same protocol identifies the prefix as load-bearing (Delta=-0.77, p<10^-12). Generation-time probes confirm a dissociation: the answer is not early-determined during generation (early commitment <5%), yet at consumption time model outputs systematically follow the explicit answer text. The format-determination effect persists through 14B (8.5x ratio, p=0.001) and converges toward zero at 32B. We propose a three-prerequisite protocol (question-only control, format characterization, all-position sweep) as a minimum standard for corruption-based faithfulness studies.

  • 1 authors
·
May 10

IndustryBench: Probing the Industrial Knowledge Boundaries of LLMs

In industrial procurement, an LLM answer is useful only if it survives a standards check: recommended material must match operating condition, every parameter must respect a regulated threshold, and no procedure may contradict a safety clause. Partial correctness can mask safety-critical contradictions that aggregate LLM benchmarks rarely capture. We introduce IndustryBench, a 2,049-item benchmark for industrial procurement QA in Chinese, grounded in Chinese national standards (GB/T) and structured industrial product records, organized by seven capability dimensions, ten industry categories, and panel-derived difficulty tiers, with item-aligned English, Russian, and Vietnamese renderings. Our construction pipeline rejects 70.3% of LLM-generated candidates at a search-based external-verification stage, calibrating how unreliable industrial QA remains after LLM-only filtering.Our evaluation decouples raw correctness, scored by a Qwen3-Max judge validated at κ_w = 0.798 against a domain expert, from a separate safety-violation (SV) check against source texts. Across 17 models in Chinese and an 8-model intersection over four languages, we find: (i) the best system reaches only 2.083 on the 0--3 rubric, leaving substantial headroom; (ii) Standards & Terminology is the most persistent capability weakness and survives item-aligned translation; (iii) extended reasoning lowers safety-adjusted scores for 12 of 13 models, primarily by introducing unsupported safety-critical details into longer final answers; and (iv) safety-violation rates reshuffle the leaderboard -- GPT-5.4 climbs from rank 6 to rank 3 after SV adjustment, while Kimi-k2.5-1T-A32B drops seven positions.Industrial LLM evaluation therefore requires source-grounded, safety-aware diagnosis rather than aggregate accuracy. We release IndustryBench with all prompts, scoring scripts, and dataset documentation.

DataMan: Data Manager for Pre-training Large Language Models

The performance emergence of large language models (LLMs) driven by data scaling laws makes the selection of pre-training data increasingly important. However, existing methods rely on limited heuristics and human intuition, lacking comprehensive and clear guidelines. To address this, we are inspired by ``reverse thinking'' -- prompting LLMs to self-identify which criteria benefit its performance. As its pre-training capabilities are related to perplexity (PPL), we derive 14 quality criteria from the causes of text perplexity anomalies and introduce 15 common application domains to support domain mixing. In this paper, we train a Data Manager (DataMan) to learn quality ratings and domain recognition from pointwise rating, and use it to annotate a 447B token pre-training corpus with 14 quality ratings and domain type. Our experiments validate our approach, using DataMan to select 30B tokens to train a 1.3B-parameter language model, demonstrating significant improvements in in-context learning (ICL), perplexity, and instruction-following ability over the state-of-the-art baseline. The best-performing model, based on the Overall Score l=5 surpasses a model trained with 50% more data using uniform sampling. We continue pre-training with high-rated, domain-specific data annotated by DataMan to enhance domain-specific ICL performance and thus verify DataMan's domain mixing ability. Our findings emphasize the importance of quality ranking, the complementary nature of quality criteria, and their low correlation with perplexity, analyzing misalignment between PPL and ICL performance. We also thoroughly analyzed our pre-training dataset, examining its composition, the distribution of quality ratings, and the original document sources.

  • 6 authors
·
Feb 26, 2025

A Lightweight Face Quality Assessment Framework to Improve Face Verification Performance in Real-Time Screening Applications

Face image quality plays a critical role in determining the accuracy and reliability of face verification systems, particularly in real-time screening applications such as surveillance, identity verification, and access control. Low-quality face images, often caused by factors such as motion blur, poor lighting conditions, occlusions, and extreme pose variations, significantly degrade the performance of face recognition models, leading to higher false rejection and false acceptance rates. In this work, we propose a lightweight yet effective framework for automatic face quality assessment, which aims to pre-filter low-quality face images before they are passed to the verification pipeline. Our approach utilises normalised facial landmarks in conjunction with a Random Forest Regression classifier to assess image quality, achieving an accuracy of 96.67%. By integrating this quality assessment module into the face verification process, we observe a substantial improvement in performance, including a comfortable 99.7% reduction in the false rejection rate and enhanced cosine similarity scores when paired with the ArcFace face verification model. To validate our approach, we have conducted experiments on a real-world dataset collected comprising over 600 subjects captured from CCTV footage in unconstrained environments within Dubai Police. Our results demonstrate that the proposed framework effectively mitigates the impact of poor-quality face images, outperforming existing face quality assessment techniques while maintaining computational efficiency. Moreover, the framework specifically addresses two critical challenges in real-time screening: variations in face resolution and pose deviations, both of which are prevalent in practical surveillance scenarios.

  • 8 authors
·
Jul 21, 2025

Development of an NLP-driven computer-based test guide for visually impaired students

In recent years, advancements in Natural Language Processing (NLP) techniques have revolutionized the field of accessibility and exclusivity of testing, particularly for visually impaired students (VIS). CBT has shown in years back its relevance in terms of administering exams electronically, making the test process easier, providing quicker and more accurate results, and offering greater flexibility and accessibility for candidates. Yet, its relevance was not felt by the visually impaired students as they cannot access printed documents. Hence, in this paper, we present an NLP-driven Computer-Based Test guide for visually impaired students. It employs a speech technology pre-trained methods to provide real-time assistance and support to visually impaired students. The system utilizes NLP technologies to convert the text-based questions and the associated options in a machine-readable format. Subsequently, the speech technology pre-trained model processes the converted text enabling the VIS to comprehend and analyze the content. Furthermore, we validated that this pre-trained model is not perverse by testing for accuracy using sample audio datasets labels (A, B, C, D, E, F, G) to compare with the voice recordings obtained from 20 VIS which is been predicted by the system to attain values for precision, recall, and F1-scores. These metrics are used to assess the performance of the pre-trained model and have indicated that it is proficient enough to give its better performance to the evaluated system. The methodology adopted for this system is Object Oriented Analysis and Design Methodology (OOADM) where Objects are discussed and built by modeling real-world instances.

  • 3 authors
·
Jan 22, 2024

Rubric-Calibrated Preferences: Cross-Query Calibration of LLM Judgments via Item Response Theory

Rerankers decide which documents users and LLMs see, yet their standard metric, nDCG, relies on human relevance labels that are costly, sparse, noisy, and discretely graded. As rerankers approach each other in quality, nDCG on these labels therefore increasingly fails to separate them. LLM judges could supply dense labels. Relative judgments within one query tell even close candidates apart, yet their scores share no scale across queries. Absolute grades share one scale but are too coarse to distinguish documents of similar relevance. We propose Rubric-Calibrated Preferences (RCP), which combine both kinds of judgment. A listwise Bradley-Terry tournament orders each query's documents, and a rubric of yes/no criteria of increasing stringency provides an absolute standard. Item Response Theory (IRT), which scores test-takers based on their answers to common questions, then uses the shared criteria to put all queries' tournament scores on one scale. RCP's retrieval metric, RCP-nDCG, replaces nDCG's discrete labels with the resulting calibrated relevance probabilities. Against blind grades from 46 external annotators, calibration raises the correlation between a query's mean score and its mean human grade from 0.538 to 0.795. The probabilities rank a useful document above a non-useful one with probability 0.910 (AUC, chance 0.5), versus 0.651 for the benchmark labels. When the annotators' grades prefer one of two rerankers and exactly one metric agrees, that metric is RCP-nDCG in 72.4% of 185 comparisons (chance about 53%). On TREC-DL, RCP-nDCG sides with NIST assessors' grades on every reranker pair that these grades separate significantly. RCP-nDCG also resolves many of nDCG's ties and separates 1.9 times as many reranker pairs on NanoBEIR. Rubric calibration thus turns relative LLM judgments into dense relevance labels that are comparable across queries and agree with human judgment.

  • 4 authors
·
Sep 27

Scores Alone Do Not Prove Discovery: The Discovery Certification Protocol for Auditing AI Research Agents

AI research agents combine prior knowledge, public sources, and experimental feedback to produce useful results. The Discovery Certification Protocol (DCP) turns claims about these results into executable recovery and feedback tests. Gate 1 validates useful improvement on sealed evaluation. Gate 2 gives matched agents the registered starting information and observed Web content while withholding the target research history. Every valid method reaching the numerical target supplies a recovery witness and triggers the Core veto. DCP Core requires adequate controls, zero observed recoveries, and a finite-sample bound on recovery in one fresh registered episode. Optional Gate 3 measures the average effect of truthful feedback relative to a specified neutral policy from a shared checkpoint. DCP Evidence adds this effect after independent null calibration and a registered effect margin. Two controlled audits exercise the complete protocol in SQLite optimization and virtual catalyst control under different models. Each produced zero recoveries in 96 episodes, with an upper bound of 0.0468. Each paired study yielded 30 truthful recoveries and zero neutral recoveries, with passing 60-pair null studies. Additional cases exercise Core, recovered, and audit-incomplete decisions. A deterministic, LLM-free verifier reproduces the decisions from frozen evidence. DCP provides a common evidence language for useful outcomes, alternative routes, and feedback effects across AI research.

FormInv: A Measurement Protocol for Semantic Invariance in Mathematical Reasoning Benchmarks

A paraphrase-quality audit of MathCheck (ICLR 2025) detected 4 semantically incorrect paraphrases in 129 groups (3.1%); removing them drops GPT-4o from rank 2 to rank 4 and elevates Claude Haiku and DeepSeek V3 above it; these ranking changes are invisible to any single-model evaluation. Cross-model unanimity found these errors automatically (>= 3/4 models for MathCheck; >= 6/9 for our primary evaluation) for under $10; in our own dataset the same protocol found that 47% of auto-generated connective-variation paraphrases were semantically incorrect. That flaw compounds a deeper measurement gap: Claude Haiku 4.5 achieves 86% accuracy yet SCR=50%, meaning half its theorems are answered differently under semantically equivalent restatements, while aggregate accuracy across 9 models spans only 86-96% yet Semantic Consistency Rates (SCR) span 50-82% -- a 32-point gap invisible to standard benchmarks. Formally, for any target ranking over 9 frontier models there exists a weighting over paraphrase families that realizes it (No-Free-Benchmark corollary), because no model Pareto-dominates all families -- so benchmark designers who select families are implicitly choosing which model wins. FormInv supplies the audit protocol (replicated on external benchmarks at 100% recall), SCR and per-theorem Cochran's Q as primary invariance measures evaluated on 9 models across 366-811 items (on Lean4-verified theorems), and FormInvSelector for regime-aware model selection.

  • 2 authors
·
May 26

SubjECTive-QA: Measuring Subjectivity in Earnings Call Transcripts' QA Through Six-Dimensional Feature Analysis

Fact-checking is extensively studied in the context of misinformation and disinformation, addressing objective inaccuracies. However, a softer form of misinformation involves responses that are factually correct but lack certain features such as clarity and relevance. This challenge is prevalent in formal Question-Answer (QA) settings such as press conferences in finance, politics, sports, and other domains, where subjective answers can obscure transparency. Despite this, there is a lack of manually annotated datasets for subjective features across multiple dimensions. To address this gap, we introduce SubjECTive-QA, a human annotated dataset on Earnings Call Transcripts' (ECTs) QA sessions as the answers given by company representatives are often open to subjective interpretations and scrutiny. The dataset includes 49,446 annotations for long-form QA pairs across six features: Assertive, Cautious, Optimistic, Specific, Clear, and Relevant. These features are carefully selected to encompass the key attributes that reflect the tone of the answers provided during QA sessions across different domain. Our findings are that the best-performing Pre-trained Language Model (PLM), RoBERTa-base, has similar weighted F1 scores to Llama-3-70b-Chat on features with lower subjectivity, such as Relevant and Clear, with a mean difference of 2.17% in their weighted F1 scores. The models perform significantly better on features with higher subjectivity, such as Specific and Assertive, with a mean difference of 10.01% in their weighted F1 scores. Furthermore, testing SubjECTive-QA's generalizability using QAs from White House Press Briefings and Gaggles yields an average weighted F1 score of 65.97% using our best models for each feature, demonstrating broader applicability beyond the financial domain. SubjECTive-QA is publicly available under the CC BY 4.0 license

  • 10 authors
·
Oct 27, 2024

Theoria: Rewrite-Acceptability Verification over Informal Reasoning States

When should an AI system's answer be trusted? Formal proof assistants offer certainty but cannot reach most of the problem distribution; scalar LLM judges offer coverage but produce opaque scores that cannot be audited after the fact and are subject to the same coherence issues as any LLM. We present Theoria, a verification architecture that closes this gap. A candidate solution is rewritten into a sequence of typed state transitions, each licensed by an explicit justification, whether that be a citation, computation, or problem-given fact, and every transition is independently auditable. The foundational invariant is completeness of change: every difference between consecutive proof states must be accounted for, so hidden premises surface as unlicensed mutations rather than passing silently. On HLE-Verified Gold (185 text-only expert problems), Theoria certifies 105 at 91.4% strict precision (Wilson 95% CI [84.5%, 95.4%]). Every certification produces a human readable proof trace in which each step can be independently challenged. Holistic LLM judges achieve comparable precision at matched coverage but fail on different problems (Jaccard 0.14-0.36), making the approaches complementary. On 95 adversarial poisoned proofs across 15 domains, structured judges catch 94.7% versus 83.2% for holistic judging (p= 0.0017). The overall 11.5 pp gap concentrates in hidden premises (90.6% vs. 62.5%, a 28 pp difference) and fabricated citations (100% vs. 90%), the error classes where the formal analysis predicts an advantage; performance is identical on arithmetic and theorem-misapplication errors, where no advantage is predicted. On GPQA Diamond (n= 65), certified precision is 97.1% (Wilson CI [85.1%, 99.5%]).

  • 2 authors
·
Jul 1

Advancing Software Quality: A Standards-Focused Review of LLM-Based Assurance Techniques

Software Quality Assurance (SQA) is critical for delivering reliable, secure, and efficient software products. The Software Quality Assurance Process aims to provide assurance that work products and processes comply with predefined provisions and plans. Recent advancements in Large Language Models (LLMs) present new opportunities to enhance existing SQA processes by automating tasks like requirement analysis, code review, test generation, and compliance checks. Simultaneously, established standards such as ISO/IEC 12207, ISO/IEC 25010, ISO/IEC 5055, ISO 9001/ISO/IEC 90003, CMMI, and TMM provide structured frameworks for ensuring robust quality practices. This paper surveys the intersection of LLM-based SQA methods and these recognized standards, highlighting how AI-driven solutions can augment traditional approaches while maintaining compliance and process maturity. We first review the foundational software quality standards and the technical fundamentals of LLMs in software engineering. Next, we explore various LLM-based SQA applications, including requirement validation, defect detection, test generation, and documentation maintenance. We then map these applications to key software quality frameworks, illustrating how LLMs can address specific requirements and metrics within each standard. Empirical case studies and open-source initiatives demonstrate the practical viability of these methods. At the same time, discussions on challenges (e.g., data privacy, model bias, explainability) underscore the need for deliberate governance and auditing. Finally, we propose future directions encompassing adaptive learning, privacy-focused deployments, multimodal analysis, and evolving standards for AI-driven software quality.

  • 1 authors
·
May 19, 2025

Operadic consistency: a label-free signal for compositional reasoning failures in LLMs

Detecting LLM reasoning failures at inference time without ground-truth labels has motivated a wide range of confidence baselines, including self-consistency, semantic entropy, and P(True), built on within-question sampling and self-evaluation. Operad theory, the formalism for systems built by iterated substitution, suggests a complementary diagnostic: a model's direct answer to a compositional query should agree with the answer it produces by composing a stated decomposition of the same query. We instantiate this idea as operadic consistency (OC), a per-question signal. Across twelve instruction-tuned LLMs (4B to 671B parameters, open-weights and closed-source) on four multi-hop QA datasets, OC is strongly correlated with accuracy on every dataset (Pearson r in [0.86, 0.94], all p leq 0.0004), and is the only signal we evaluate with r geq 0.85 uniformly across all four datasets. Chain-of-thought self-consistency (CoT-SC; Wang et al., 2023) matches OC on HotpotQA and DROP (r = 0.93, 0.87) but drops to r approx 0.45 on MuSiQue and StrategyQA. At the per-question level, OC contributes information beyond CoT-SC and semantic entropy on every dataset (cluster-robust p leq 10^{-16} for the OC coefficient), and the conclusion is robust to additionally controlling for constructed decomposition-aware baselines (p leq 10^{-13}). The same signal yields selective-prediction improvements (accuracy at fixed coverage) over a tuned CoT-SC baseline at the equal-cost K = 3 budget (AUARC lifts of +0.086 to +0.096 and AUROC lifts of +0.092 to +0.164; 95% CIs exclude zero on every cell). On five frontier thinking models, where the decomposition is extracted from the model's own chain of thought, the same equal-cost comparison gives positive selective-prediction point-estimate lift on all 16 (dataset, budget, metric) cells tested, with 95% CIs excluding zero on 12 of the 16.

  • 3 authors
·
Jun 10

KVQ: Kwai Video Quality Assessment for Short-form Videos

Short-form UGC video platforms, like Kwai and TikTok, have been an emerging and irreplaceable mainstream media form, thriving on user-friendly engagement, and kaleidoscope creation, etc. However, the advancing content-generation modes, e.g., special effects, and sophisticated processing workflows, e.g., de-artifacts, have introduced significant challenges to recent UGC video quality assessment: (i) the ambiguous contents hinder the identification of quality-determined regions. (ii) the diverse and complicated hybrid distortions are hard to distinguish. To tackle the above challenges and assist in the development of short-form videos, we establish the first large-scale Kaleidoscope short Video database for Quality assessment, termed KVQ, which comprises 600 user-uploaded short videos and 3600 processed videos through the diverse practical processing workflows, including pre-processing, transcoding, and enhancement. Among them, the absolute quality score of each video and partial ranking score among indistinguishable samples are provided by a team of professional researchers specializing in image processing. Based on this database, we propose the first short-form video quality evaluator, i.e., KSVQE, which enables the quality evaluator to identify the quality-determined semantics with the content understanding of large vision language models (i.e., CLIP) and distinguish the distortions with the distortion understanding module. Experimental results have shown the effectiveness of KSVQE on our KVQ database and popular VQA databases.

  • 9 authors
·
Feb 11, 2024

The Character Error Vector: Decomposable errors for page-level OCR evaluation

The Character Error Rate (CER) is a key metric for evaluating the quality of Optical Character Recognition (OCR). However, this metric assumes that text has been perfectly parsed, which is often not the case. Under page-parsing errors, CER becomes undefined, limiting its use as a metric and making evaluating page-level OCR challenging, particularly when using data that do not share a labelling schema. We introduce the Character Error Vector (CEV), a bag-of-characters evaluator for OCR. The CEV can be decomposed into parsing and OCR, and interaction error components. This decomposability allows practitioners to focus on the part of the Document Understanding pipeline that will have the greatest impact on overall text extraction quality. The CEV can be implemented using a variety of methods, of which we demonstrate SpACER (Spatially Aware Character Error Rate) and a Character distribution method using the Jensen-Shannon Distance. We validate the CEV's performance against other metrics: first, the relationship with CER; then, parse quality; and finally, as a direct measure of page-level OCR quality. The validation process shows that the CEV is a valuable bridge between parsing metrics and local metrics like CER. We analyse a dataset of archival newspapers made of degraded images with complex layouts and find that state-of-the-art end-to-end models are outperformed by more traditional pipeline approaches. Whilst the CEV requires character-level positioning for optimal triage, thresholding on easily available values can predict the main error source with an F1 of 0.91. We provide the CEV as part of a Python library to support Document understanding research.

  • 3 authors
·
Apr 6

Unlocking Public Catalogues: Instruction-Tuning LLMs for ICD Coding of German Tumor Diagnoses

Accurate coding of tumor diagnoses with ICD-10-GM and ICD-O-3 is essential for structured cancer documentation in Germany. Smaller open-weight LLMs are appealing for privacy-preserving automation but often struggle with coding accuracy in German-language contexts. This study investigates whether instruction-based fine-tuning on public datasets improves the coding accuracy of open-weight LLMs for German tumor diagnosis texts. The evaluation uses coded diagnoses from the local tumor documentation system as test data. In a systematic data quality assessment, the upper limit for ICD-10 coding performance was estimated at 60-79% for exact and 81-94% for partial (three-character codes only) derivation. As training data, over 500,000 question-answer pairs were created based on the ICD-10-GM, ICD-O-3, and OPS catalogues. Eight open-weight models from the Qwen, Llama, and Mistral families (7-70 B parameters) were fine-tuned. ICD-10-GM accuracy rose from 1.4-24% to 41-58%, and partial accuracy from 31-74% to 73-83%. The accuracy of ICD-O-3 topography coding also improved but started and remained considerably lower with an exact accuracy of 22-40% and a partial accuracy of 56-67% after fine-tuning. Malformed code outputs dropped to 0% for all models. Tumor-diagnosis recognition reached 99%. Accuracy correlated positively with model size, but gaps between small and large models narrowed after fine-tuning. The reasoning mode in Qwen3 generally yielded a lower performance than fine-tuning and was over 100 times slower. Our findings highlight the potential of leveraging public catalogues to build instruction datasets that improve LLMs in medical documentation tasks. The complete training dataset and the best-performing checkpoints of the fine-tuned models are available from https://huggingface.co/datasets/stefan-m-lenz/ICDOPS-QA-2024.

  • 7 authors
·
Oct 15, 2025 4

GPT Takes the Bar Exam

Nearly all jurisdictions in the United States require a professional license exam, commonly referred to as "the Bar Exam," as a precondition for law practice. To even sit for the exam, most jurisdictions require that an applicant completes at least seven years of post-secondary education, including three years at an accredited law school. In addition, most test-takers also undergo weeks to months of further, exam-specific preparation. Despite this significant investment of time and capital, approximately one in five test-takers still score under the rate required to pass the exam on their first try. In the face of a complex task that requires such depth of knowledge, what, then, should we expect of the state of the art in "AI?" In this research, we document our experimental evaluation of the performance of OpenAI's `text-davinci-003` model, often-referred to as GPT-3.5, on the multistate multiple choice (MBE) section of the exam. While we find no benefit in fine-tuning over GPT-3.5's zero-shot performance at the scale of our training data, we do find that hyperparameter optimization and prompt engineering positively impacted GPT-3.5's zero-shot performance. For best prompt and parameters, GPT-3.5 achieves a headline correct rate of 50.3% on a complete NCBE MBE practice exam, significantly in excess of the 25% baseline guessing rate, and performs at a passing rate for both Evidence and Torts. GPT-3.5's ranking of responses is also highly-correlated with correctness; its top two and top three choices are correct 71% and 88% of the time, respectively, indicating very strong non-entailment performance. While our ability to interpret these results is limited by nascent scientific understanding of LLMs and the proprietary nature of GPT, we believe that these results strongly suggest that an LLM will pass the MBE component of the Bar Exam in the near future.

  • 2 authors
·
Dec 29, 2022

MedAlign: A Clinician-Generated Dataset for Instruction Following with Electronic Medical Records

The ability of large language models (LLMs) to follow natural language instructions with human-level fluency suggests many opportunities in healthcare to reduce administrative burden and improve quality of care. However, evaluating LLMs on realistic text generation tasks for healthcare remains challenging. Existing question answering datasets for electronic health record (EHR) data fail to capture the complexity of information needs and documentation burdens experienced by clinicians. To address these challenges, we introduce MedAlign, a benchmark dataset of 983 natural language instructions for EHR data. MedAlign is curated by 15 clinicians (7 specialities), includes clinician-written reference responses for 303 instructions, and provides 276 longitudinal EHRs for grounding instruction-response pairs. We used MedAlign to evaluate 6 general domain LLMs, having clinicians rank the accuracy and quality of each LLM response. We found high error rates, ranging from 35% (GPT-4) to 68% (MPT-7B-Instruct), and an 8.3% drop in accuracy moving from 32k to 2k context lengths for GPT-4. Finally, we report correlations between clinician rankings and automated natural language generation metrics as a way to rank LLMs without human review. We make MedAlign available under a research data use agreement to enable LLM evaluations on tasks aligned with clinician needs and preferences.

  • 30 authors
·
Aug 27, 2023 4

Metric Unreliability in Multimodal Machine Unlearning: A Systematic Analysis and Principled Unified Score

Machine unlearning in Vision-Language Models (VLMs) is required for compliance with the General Data Protection Regulation (GDPR), yet current evaluation practices are inconsistent. We present the first systematic study of metric reliability in multimodal unlearning. Five standard metrics, Forget Accuracy (FA), Retain Accuracy (RA), Membership Inference Attack (MIA), Activation Distance (AD), and JS divergence (JS), yield conflicting method rankings across three VQA benchmarks (MLLMU-Bench, UnLOK-VQA, MMUBench). Kendall tau analysis over 36 unlearned LLaVA-1.5-7B models reveals two opposing clusters, {FA, RA, MIA} and {AD, JS}, with tau_FA_AD = -0.26, reproduced on BLIP-2 OPT-2.7B. Agreement is lower in multimodal VQA (average tau = 0.086) than in unimodal classification (average tau = 0.158; difference = 0.072), indicating that dual image-and-text pathways amplify inconsistency. We introduce the Unified Quality Score (UQS), a composite metric with weights derived from each metric's Spearman correlation with the oracle distance d(M_hat, M_star), where M_star is the oracle model retrained only on the retain set. RA shows the strongest reliability (rho = 0.484, p = 0.003), while FA is negatively correlated (rho = -0.418, p = 0.011). UQS yields stable rankings under 100 random weight perturbations (tau = 0.647 +- 0.262). We release the benchmark, 36 checkpoints, and an interactive leaderboard. Code and pre-computed results are available at https://github.com/neurips26/UnifiedUnl.

  • 3 authors
·
May 7

Option-Aware Retrieval and Task-Specific VLM Adaptation for Medical VQA

We describe our submission to the MedReason 2026 challenge, covering multiple-choice (MCQ) and open-ended (OE) medical visual question answering (VQA) under fully offline, containerized inference. Our first finding is that MCQ retrieval must compare answer semantics rather than answer labels: labels are independently assigned per question, so copying a retrieved neighbor's label transfers no useful information, whereas scoring each current option's text against correct-answer text from similar training cases raises retrieval-only accuracy from 20.0\% to 57.5\% on a 200-case retrieval-excluded development holdout. Our second finding attributes the submitted system's accuracy: holding the task-specific MCQ Low-Rank Adaptation (LoRA) adapter fixed and varying the number \(k\) of in-prompt retrieved examples changes accuracy by at most one case --- 187/200 (93.5\%) at both \(k=0\) and the adapter's training-time \(k=1\), 188/200 (94.0\%) at the packaged runtime's default \(k=3\) --- and the submitted confidence-gated override adds no net accuracy on top of \(k=3\), selecting the VLM in 198/200 cases. With the final MCQ adapter fixed, retrieval changes accuracy by at most one case, and gating provides no net gain. On 20 OE cases, token-F1 and RaTEScore~zhao2024ratescore decrease as \(k\) grows, but paired sign tests on token-F1 differences are nonsignificant (\(p \ge 0.29\)); a single-annotator comparison found 6/20 wrong-anchor errors for the final configuration and 14/20 for an earlier configuration that jointly differed in routing, adapter, and prompting. The system reaches 94.0\% MCQ accuracy on the development holdout and 93.20\% on the organizer's official pre-evaluation, versus 29.43\% for the off-the-shelf reference baseline, while both of the organizer's open-ended scores are lower than that baseline's (ground-truth agreement 1.245 versus 1.588, visual accuracy 1.995 versus 2.696, each out of 4).

  • 3 authors
·
Sep 13

RaV-IDP: A Reconstruction-as-Validation Framework for Faithful Intelligent Document Processing

Intelligent document processing pipelines extract structured entities (tables, images, and text) from documents for use in downstream systems such as knowledge bases, retrieval-augmented generation, and analytics. A persistent limitation of existing pipelines is that extraction output is produced without any intrinsic mechanism to verify whether it faithfully represents the source. Model-internal confidence scores measure inference certainty, not correspondence to the document, and extraction errors pass silently into downstream consumers. We present Reconstruction as Validation (RaV-IDP), a document processing pipeline that introduces reconstruction as a first-class architectural component. After each entity is extracted, a dedicated reconstructor renders the extracted representation back into a form comparable to the original document region, and a comparator scores fidelity between the reconstruction and the unmodified source crop. This fidelity score is a grounded, label-free quality signal. When fidelity falls below a per-entity-type threshold, a structured GPT-4.1 vision fallback is triggered and the validation loop repeats. We enforce a bootstrap constraint: the comparator always anchors against the original document region, never against the extraction, preventing the validation from becoming circular. We further propose a per-stage evaluation framework pairing each pipeline component with an appropriate benchmark. The code pipeline is publicly available at https://github.com/pritesh-2711/RaV-IDP for experimentation and use.

  • 1 authors
·
Apr 25 2

LLM-Based Test Oracles: Source-of-Authority Taxonomy -- A Systematic Literature Review

Large language models (LLMs) increasingly decide whether software behaves correctly, either by writing a test oracle or by acting as one. Yet two oracles can look identical and rest on different ground: one assertion encodes a written specification, another only what the model learned in training. Prior secondary studies sort oracles by form or by technique, rarely by the property that governs how far a verdict can be trusted: where its authority comes from. This systematic literature review, reported under the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) 2020 guidelines, screens 2,436 records to 54 included studies, extended by citation searching (snowballing) to 83 in total. We read the corpus along three axes: the source of an oracle's authority, the form it takes, and the mechanism that adjudicates it. Just over half of the corpus reaches a verdict with no specification at all. That is what lets these oracles work on code with no specification to consult, and what leaves a challenged verdict with less to fall back on. Source and mechanism cross-cut rather than coincide, so a label such as LLM-as-a-judge names how a verdict is produced, not why it should be trusted. Oracle quality is most often judged by resemblance to a known oracle rather than by whether injected faults are caught. The first question to ask of any LLM oracle is therefore what one would point to in defending its verdict. The protocol, search query, and per-study coding sheet are released.

  • 2 authors
·
Jul 6 1

MR-IQA: A Unified Margin View of Regression and Ranking for Blind Image Quality Assessment

Blind image quality assessment (BIQA) is commonly built on two basic learning paradigms: regression and ranking. Regression calibrates absolute scores, whereas ranking recovers quality structure from ordinal relations. Although joint regression-ranking supervision often improves BIQA, the relation between the two paradigms remains largely empirical and underexplored. In this work, we revisit what underlies regression and ranking and identify pairwise relational distance, termed quality margin, as their common bridge. Our derivation shows that, at the objective-optimization level, both paradigms fit quality margins: regression fits margins induced by score endpoints, while ranking fits transformed or sign-level margins through preference probabilities. Motivated by this insight, we propose MR-IQA, a direct quality-margin optimization framework for reinforcement learning (RL)-based BIQA. MR-IQA samples quality scores and optimizes pairwise margin errors as policy rewards, thereby modeling quality structure more explicitly. Experiments on six BIQA benchmarks show competitive general performance, and controlled comparisons demonstrate that MR-IQA achieves the strongest average PLCC/SRCC over regression- or ranking-based RL methods. Our findings provide a new insight into unifying regression and ranking, offering a theoretical basis for understanding quality-structure modeling in BIQA and beyond.

  • 7 authors
·
Jun 28

CER-HV: A CER-Based Human-in-the-Loop Framework for Cleaning Datasets Applied to Arabic-Script HTR

Handwritten text recognition (HTR) for Arabic-script languages still lags behind Latin-script HTR, despite recent advances in model architectures, datasets, and benchmarks. We show that data quality is a significant limiting factor in many published datasets and propose CER-HV (CER-based Ranking with Human Verification) as a framework to detect and clean label errors. CER-HV combines a CER-based noise detector, built on a carefully configured Convolutional Recurrent Neural Network (CRNN) with early stopping to avoid overfitting noisy samples, and a human-in-the-loop (HITL) step that verifies high-ranking samples. The framework reveals that several existing datasets contain previously underreported problems, including transcription, segmentation, orientation, and non-text content errors. These have been identified with up to 90 percent precision in the Muharaf and 80-86 percent in the PHTI datasets. We also show that our CRNN achieves state-of-the-art performance across five of the six evaluated datasets, reaching 8.45 percent Character Error Rate (CER) on KHATT (Arabic), 8.26 percent on PHTI (Pashto), 10.66 percent on Ajami, and 10.11 percent on Muharaf (Arabic), all without any data cleaning. We establish a new baseline of 11.3 percent CER on the PHTD (Persian) dataset. Applying CER-HV improves the evaluation CER by 0.3-0.6 percent on the cleaner datasets and 1.0-1.8 percent on the noisier ones. Although our experiments focus on documents written in an Arabic-script language, including Arabic, Persian, Urdu, Ajami, and Pashto, the framework is general and can be applied to other text recognition datasets.

  • 3 authors
·
Jan 23

The Price of Intelligence: A Quality-Adjusted Price Index for AI Services

Posted prices for AI inference have fallen steadily since 2024, yet the measured speed of that fall depends almost entirely on the method of measurement. This paper constructs quality-adjusted price indices for the AI inference market from public data. The panel assembles 21,024 posted-price observations across 3,208 models and 86 providers and joins them to 4,605 benchmark scores through a latent quality index estimated from benchmark response patterns, so the quality ladder of the hedonic tradition is built here from evaluations in place of product characteristics. Measured by the matched-model methods that statistical agencies apply to software, inference prices fell at 0.10 log points a year. The quality-adjusted index fell at 0.73, so 87% of the decline is invisible to current methods, with direct consequences for measured competition, concentration and productivity in this market. Counted per completed task, moreover, the buyer's price stopped falling. Reasoning models raised token consumption faster than token prices fell, and the seller's and buyer's prices accordingly diverged. A pre-registered validity audit disciplines the quality measure and yields the sharpest result. Excluding contamination-flagged benchmarks leaves model rankings intact at 0.998 yet moves the index by 0.49 log points a year, so the leaderboard-stability arguments standard in AI evaluation offer no defence of economic statistics built on benchmarks. Prices, quality and the audit are fully reproducible from public sources at zero cost.

  • 1 authors
·
Aug 29

RankMe: Assessing the downstream performance of pretrained self-supervised representations by their rank

Joint-Embedding Self Supervised Learning (JE-SSL) has seen a rapid development, with the emergence of many method variations but only few principled guidelines that would help practitioners to successfully deploy them. The main reason for that pitfall comes from JE-SSL's core principle of not employing any input reconstruction therefore lacking visual cues of unsuccessful training. Adding non informative loss values to that, it becomes difficult to deploy SSL on a new dataset for which no labels can help to judge the quality of the learned representation. In this study, we develop a simple unsupervised criterion that is indicative of the quality of the learned JE-SSL representations: their effective rank. Albeit simple and computationally friendly, this method -- coined RankMe -- allows one to assess the performance of JE-SSL representations, even on different downstream datasets, without requiring any labels. A further benefit of RankMe is that it does not have any training or hyper-parameters to tune. Through thorough empirical experiments involving hundreds of training episodes, we demonstrate how RankMe can be used for hyperparameter selection with nearly no reduction in final performance compared to the current selection method that involve a dataset's labels. We hope that RankMe will facilitate the deployment of JE-SSL towards domains that do not have the opportunity to rely on labels for representations' quality assessment.

  • 4 authors
·
Oct 5, 2022

GDP.pdf: Benchmarking Grounded Multimodal Reasoning over Professional PDF Documents

A large share of day-to-day work in professional domains happens inside PDF files: benefits packets, leases, datasheets, clinical guidelines, construction plans. Benchmarks for document AI have generally measured the required capabilities in isolation: OCR, layout analysis, chart reasoning, table QA, document VQA. A high score on any one of them does not necessarily reveal whether a model can answer a realistic question that someone in the field would actually ask about a specific PDF. GDP_pdf is a benchmark built to measure this directly. It consists of question-document pairs authored by working professionals in ten fields, and a candidate question was kept only when at least two frontier multimodal models failed it in a way that mattered: a wrong answer, missed decisive evidence, or a fabricated claim, rather than a superficial difference such as style. Each item comes with a rubric of atomic criteria, so we can report a graded rubric score as well as a strict task-level pass rate, and each item is tagged against a taxonomy of eleven capabilities in three tiers, spanning text extraction and grounding, table and chart comprehension, cross-referencing, spatial reasoning, and abstention on unsupported queries. We report results for seventeen frontier models on the 100-item benchmark: the best model passes only 30.7% of the items and the worst passes 2%. Most errors trace back to a small set of recurring loss patterns: misaligned tables, misread charts, skipped footnotes and exclusions, miscounted floor-plan symbols, scan noise, and amendments that supersede earlier text.

  • 4 authors
·
Jul 14

PrismaCoder: Pushing the Boundaries of Open Multimodal Code Intelligence through Decomposed Rubric Synthesis

Multimodal code intelligence connects the symbolic world of programs with the visual world their execution creates. Interest in this capability is burgeoning, as models are increasingly asked to produce charts, webpages, animations, and semi-structured documents. Recently, proprietary models have pushed far ahead, producing interactive artifacts even from a text description or a screenshot alone. Yet their data and training remain closed, and open progress is held back by the quantity and quality of available data and by the pipelines and methods for producing it. Quality is the harder of the two, since a sample must be correct as a program, well built, and above all visually right once rendered. No existing signal covers all three. Execution often returns just a pass or fail, code similarity does not map to the visual output, and task-specific verifiers do not generalize. To push open progress further, we start from the data side with PrismaForge, a hierarchical data pipeline centered on a synthesized rubric that decomposes these factors into checkable criteria. The same rubric serves as both filter and reward: it curates the supervised corpus, then drives reinforcement learning on visual-coding tasks. Leveraging PrismaForge for data synthesis and filtering, we build PrismaCoder-2M, the most diverse open dataset for multimodal code intelligence and the largest to date. On the model side, we train PrismaCoder-9B and PrismaCoder-35B on this data and release both. They lead the open state of the art by a wide margin and rival leading proprietary systems. Our analyses further show that the proposed rubric-based pipeline improves multimodal coding performance across model backbones. We release our code and data at https://qiushisun.github.io/PrismaCoder-Home/.

PanCanBench: A Comprehensive Benchmark for Evaluating Large Language Models in Pancreatic Oncology

Large language models (LLMs) have achieved expert-level performance on standardized examinations, yet multiple-choice accuracy poorly reflects real-world clinical utility and safety. As patients and clinicians increasingly use LLMs for guidance on complex conditions such as pancreatic cancer, evaluation must extend beyond general medical knowledge. Existing frameworks, such as HealthBench, rely on simulated queries and lack disease-specific depth. Moreover, high rubric-based scores do not ensure factual correctness, underscoring the need to assess hallucinations. We developed a human-in-the-loop pipeline to create expert rubrics for de-identified patient questions from the Pancreatic Cancer Action Network (PanCAN). The resulting benchmark, PanCanBench, includes 3,130 question-specific criteria across 282 authentic patient questions. We evaluated 22 proprietary and open-source LLMs using an LLM-as-a-judge framework, measuring clinical completeness, factual accuracy, and web-search integration. Models showed substantial variation in rubric-based completeness, with scores ranging from 46.5% to 82.3%. Factual errors were common, with hallucination rates (the percentages of responses containing at least one factual error) ranging from 6.0% for Gemini-2.5 Pro and GPT-4o to 53.8% for Llama-3.1-8B. Importantly, newer reasoning-optimized models did not consistently improve factuality: although o3 achieved the highest rubric score, it produced inaccuracies more frequently than other GPT-family models. Web-search integration did not inherently guarantee better responses. The average score changed from 66.8% to 63.9% for Gemini-2.5 Pro and from 73.8% to 72.8% for GPT-5 when web search was enabled. Synthetic AI-generated rubrics inflated absolute scores by 17.9 points on average while generally maintaining similar relative ranking.

  • 16 authors
·
Mar 1

Meta-rater: A Multi-dimensional Data Selection Method for Pre-training Language Models

The composition of pre-training datasets for large language models (LLMs) remains largely undisclosed, hindering transparency and efforts to optimize data quality, a critical driver of model performance. Current data selection methods, such as natural language quality assessments, diversity-based filters, and classifier-based approaches, are limited by single-dimensional evaluation or redundancy-focused strategies. To address these gaps, we propose four dimensions to evaluate data quality: professionalism, readability, reasoning, and cleanliness. We further introduce Meta-rater,a multi-dimensional data selection method that integrates these dimensions with existing quality metrics through learned optimal weightings. Meta-rater employs proxy models to train a regression model that predicts validation loss, enabling the identification of optimal combinations of quality scores. Experiments demonstrate that Meta-rater doubles convergence speed for 1.3B parameter models and improves downstream task performance by 3.23, with advantages that scale to models as large as 7.2B parameters. Our work establishes that holistic, multi-dimensional quality integration significantly outperforms conventional single-dimension approaches, offering a scalable paradigm for enhancing pre-training efficiency and model capability. To advance future research, we release scripts, data, and models at https://github.com/opendatalab/Meta-rater.

  • 10 authors
·
Apr 19, 2025

What Paired Evaluations Reveal under Visual Perturbations

Robustness evaluation must examine diverse visual perturbations, while benchmarks cover only some real-world conditions and physical testing is costly. Paired evaluations link clean and perturbed predictions for the same image, capturing changes in correctness, confidence, and acceptance beyond aggregate accuracy. We investigate how this image correspondence supports two needs in robustness evaluation: interpreting paired evaluation results and prioritizing samples for physical testing. To interpret paired evaluation results, we fix both sets of prediction records and vary their correspondence within each class. We prove that classwise correct-correct counts give the same sharp bounds on lost acceptance and mean true-class probability decrease among retained-correct inputs as any feasible five-state refinement. Distinguishing persistent from changed wrong answers can further constrain accepted-error transitions, while shared correspondence can establish policy orderings left unresolved by separate cost intervals. To prioritize samples for physical testing, we retain each image's synthetic responses and rank clean-correct images by their mean true-class probability under corruption. Across 44 classifiers, testing the highest-risk 20% finds 67% and 45% of failures under mild screen and print recaptures, versus 58% and 36% for clean confidence and 60% and 37% for an equal-size natural-transformation average. With both probability averaging and an A3Rank scoring adaptation, the tested corruption set yields higher mean failure recall than the natural-transform set; differences between scores depend on the source and budget. Together, these findings show that the value of correspondence depends on the evaluation objective: classwise counts suffice for specified reliability bounds, while image-specific synthetic responses improve the allocation of physical tests within the evaluated pool.

  • 7 authors
·
Sep 27

EHRNoteQA: An LLM Benchmark for Real-World Clinical Practice Using Discharge Summaries

Discharge summaries in Electronic Health Records (EHRs) are crucial for clinical decision-making, but their length and complexity make information extraction challenging, especially when dealing with accumulated summaries across multiple patient admissions. Large Language Models (LLMs) show promise in addressing this challenge by efficiently analyzing vast and complex data. Existing benchmarks, however, fall short in properly evaluating LLMs' capabilities in this context, as they typically focus on single-note information or limited topics, failing to reflect the real-world inquiries required by clinicians. To bridge this gap, we introduce EHRNoteQA, a novel benchmark built on the MIMIC-IV EHR, comprising 962 different QA pairs each linked to distinct patients' discharge summaries. Every QA pair is initially generated using GPT-4 and then manually reviewed and refined by three clinicians to ensure clinical relevance. EHRNoteQA includes questions that require information across multiple discharge summaries and covers eight diverse topics, mirroring the complexity and diversity of real clinical inquiries. We offer EHRNoteQA in two formats: open-ended and multi-choice question answering, and propose a reliable evaluation method for each. We evaluate 27 LLMs using EHRNoteQA and examine various factors affecting the model performance (e.g., the length and number of discharge summaries). Furthermore, to validate EHRNoteQA as a reliable proxy for expert evaluations in clinical practice, we measure the correlation between the LLM performance on EHRNoteQA, and the LLM performance manually evaluated by clinicians. Results show that LLM performance on EHRNoteQA have higher correlation with clinician-evaluated performance (Spearman: 0.78, Kendall: 0.62) compared to other benchmarks, demonstrating its practical relevance in evaluating LLMs in clinical settings.

kaist-ai KAIST AI
·
Feb 25, 2024

A medical coding language model trained on clinical narratives from a population-wide cohort of 1.8 million patients

Medical coding translates clinical documentation into standardized codes for billing, research, and public health, but manual coding is time-consuming and error-prone. Existing automation efforts rely on small datasets that poorly represent real-world patient heterogeneity. We trained a language model on 5.8 million electronic health records from 1.8 million patients across nearly all specialties in Eastern Denmark (2006--2016) to predict ICD-10 codes from clinical notes, medications, and laboratory results. Evaluated on 270,000 held-out patients, the model achieved a micro F1 of 71.8% and a top-10 recall of 95.5%. Performance varied by specialty (F1: 53--91%), with higher scores in specialties with well-defined diagnostic criteria. Codes appearing predominantly as secondary diagnoses had markedly lower F1 scores. For three such codes (suicide-related behaviors, weight disorders, and hypertension), the model identified thousands of uncoded cases, of which 76-86% were confirmed valid upon manual review, suggesting systematic under-coding rather than model error. These findings suggest under-coding of secondary diagnoses in Eastern Denmark during this period, with potential implications for epidemiological research, public health surveillance, and understanding of multimorbidity. Similar time constraints and reimbursement structures in other healthcare systems suggest this may not be isolated to this dataset. The model can automate coding for approximately 50% of cases and provide accurate suggestions for most others, and may offer a practical solution to help capture missed secondary conditions.

  • 6 authors
·
Mar 2

BrowseComp-ZH: Benchmarking Web Browsing Ability of Large Language Models in Chinese

As large language models (LLMs) evolve into tool-using agents, the ability to browse the web in real-time has become a critical yardstick for measuring their reasoning and retrieval competence. Existing benchmarks such as BrowseComp concentrate on English and overlook the linguistic, infrastructural, and censorship-related complexities of other major information ecosystems -- most notably Chinese. To address this gap, we introduce BrowseComp-ZH, a high-difficulty benchmark purpose-built to comprehensively evaluate LLM agents on the Chinese web. BrowseComp-ZH consists of 289 multi-hop questions spanning 11 diverse domains. Each question is reverse-engineered from a short, objective, and easily verifiable answer (e.g., a date, number, or proper noun). A two-stage quality control protocol is applied to strive for high question difficulty and answer uniqueness. We benchmark over 20 state-of-the-art language models and agentic search systems on our proposed BrowseComp-ZH. Despite their strong conversational and retrieval capabilities, most models struggle severely: a large number achieve accuracy rates below 10%, and only a handful exceed 20%. Even the best-performing system, OpenAI's DeepResearch, reaches just 42.9%. These results demonstrate the considerable difficulty of BrowseComp-ZH, where success demands not only effective retrieval strategies, but also sophisticated reasoning and information reconciliation -- capabilities that current models still struggle to master. Our dataset, construction guidelines, and benchmark results have been publicly released at https://github.com/PALIN2018/BrowseComp-ZH.

  • 16 authors
·
Apr 27, 2025 2

Beyond Compilation: Evaluating Faithful Natural-Language-to-Lean Statement Formalization

Lean verifies that a generated declaration is well typed, but cannot check whether it states what the user intended. We measure how far compilation overstates faithfulness in statement autoformalization without canonical Lean targets. Our criterion requires Lean compilation and agreement of two LLM judges from different model families. On an independent random audit, it agrees with the human majority on 91.5% of cases; it rarely accepts an unfaithful output but rejects some faithful ones. Across eight systems on 227 university-level statements, the gap between compiling and accepted outputs ranges from 1.3 to 29.5 percentage points: our tool-augmented agent compiles 87.2% of the statements, but only 57.7% are accepted. Human review of all the agent's rejections confirms that 23.8 of its 29.5 points are real translation errors. For the gaps of the seven one-shot systems, a two-stage review by Claude Opus 5.5 with Lean and GPT-6.1 Sol, validated on these human labels, finds that 78-100% are real translation errors for six of them. When GPT-5.2, one of the two judges, grades the translations of two models released after it, GPT-6 Astra and Claude Opus 5.5, it accepts 83% of the statements for each, against 21% for one-shot GPT-5.2. For these two models, the same review classifies only 4 of their 54 rejections (7%) as translation errors, so most of their measured gap is judge errors rather than translation errors. This is consistent with these systems erring less while the judge does not: the fewer errors a system makes, the smaller the share of its rejections that are translation errors. Finally, a 2^3 tool ablation of the agent shows that Lean feedback drives most of its compilation gain, and that nearly half of this gain fails the semantic criterion. Code and data are available at https://github.com/grenadeComing/beyond-compilation.

ucriverside UC Riverside
·
Oct 14 2

AGO AI Quality Gate: Evidence-First Release Decisions for Retrieval-Augmented Generation

Enterprises adopting retrieval-augmented generation (RAG) face a recurring operational decision: promote, revise, or block a system version. The evidence is incomplete and the metrics come from fallible LLM judges. We report on AGO AI Quality Gate (AGO), an evidence-first quality-gate framework deployed in industrial RAG assessment engagements. AGO integrates four key components: a four-state decision model that treats missing data and judge errors as explicit outcomes; layered scoring combining deterministic checks, local guardrails, and structured LLM evaluation; a stratified beta-binomial gate that quantifies regression risk probabilistically; and a mandatory meta-evaluation protocol to validate the LLM judge before it influences decisions. Since engagement data is proprietary, we evaluate the judge layer on RAGBench, a public benchmark of 100k annotated RAG traces across 12 datasets. On identical stratified test samples (N=1200 per judge), a low-cost judge (gpt-4.1-nano) detects non-adherent answers barely above chance (AUROC 0.603 [0.570, 0.634]), despite producing flawless protocol output, while gpt-4o reaches 0.783 [0.756, 0.807] -- yet its per-domain performance still ranges from 0.62 to 0.88. A fixed-seed gate study spanning regression, no change, and improvement quantifies unsafe promotion, false-alarm cost, and improvement throughput. Under regression, the decision-grade profile reduces unsafe promotion to 22.2%-35.1%, against 29.3%-41.8% for a naive gate. These results support the design choices that judge quality must be measured per engagement and that point estimates alone are not a release decision.

  • 6 authors
·
Sep 30 2

ReportQA: QA-Based Radiology Report Evaluation

Radiology report evaluation is essential for advancing automated report generation. Natural language generation metrics have limited clinical relevance. Clinical efficacy (CE) metrics evaluate important medical findings, but focus mainly on presence and cover only a limited set of entities. Due to heavy reliance on manual annotations, it is difficult for CE metrics to extend clinical entities or attributes. In clinical practice, radiology reports serve as a medium for information transfer. Clinicians use them to perform downstream diagnostic tasks without directly inspecting images. Based on this insight, we propose ReportQA, a clinical-related and flexible radiology report evaluation framework, supporting detailed quantitative analysis of radiology report generation systems. We first collect datasets covering multiple imaging modalities and anatomical regions. We then construct knowledge trees of clinical entities and attributes with radiologist guidance, and use large language models (LLMs) to extract structured information from raw reports. Next, we generate QA pairs from predefined templates and apply quality control through self-filtering and report-based filtering. During evaluation, the report is treated as context, and an LLM acts as a judge model to answer the QA pairs. Based on the resulting QA accuracy, we introduce QAScore metric. Compared with existing metrics, QAScore shows better alignment with radiologist judgments. Experiments on multiple state-of-the-art vision-language models reveal that current report-based inference paradigms struggle to learn fine-grained clinical representations and exhibit strong negative prior biases. In contrast, question-driven inference provides a more effective alternative. For reproducibility and extensibility, we release the knowledge trees, structured reports, and QA pairs, along with the pipeline code for QA construction and evaluation.

  • 13 authors
·
Jun 12

Alignment Quality Index (AQI) : Beyond Refusals: AQI as an Intrinsic Alignment Diagnostic via Latent Geometry, Cluster Divergence, and Layer wise Pooled Representations

Alignment is no longer a luxury, it is a necessity. As large language models (LLMs) enter high-stakes domains like education, healthcare, governance, and law, their behavior must reliably reflect human-aligned values and safety constraints. Yet current evaluations rely heavily on behavioral proxies such as refusal rates, G-Eval scores, and toxicity classifiers, all of which have critical blind spots. Aligned models are often vulnerable to jailbreaking, stochasticity of generation, and alignment faking. To address this issue, we introduce the Alignment Quality Index (AQI). This novel geometric and prompt-invariant metric empirically assesses LLM alignment by analyzing the separation of safe and unsafe activations in latent space. By combining measures such as the Davies-Bouldin Score (DBS), Dunn Index (DI), Xie-Beni Index (XBI), and Calinski-Harabasz Index (CHI) across various formulations, AQI captures clustering quality to detect hidden misalignments and jailbreak risks, even when outputs appear compliant. AQI also serves as an early warning signal for alignment faking, offering a robust, decoding invariant tool for behavior agnostic safety auditing. Additionally, we propose the LITMUS dataset to facilitate robust evaluation under these challenging conditions. Empirical tests on LITMUS across different models trained under DPO, GRPO, and RLHF conditions demonstrate AQI's correlation with external judges and ability to reveal vulnerabilities missed by refusal metrics. We make our implementation publicly available to foster future research in this area.

  • 15 authors
·
Jun 16, 2025 2

CAMP-VQA: Caption-Embedded Multimodal Perception for No-Reference Quality Assessment of Compressed Video

The prevalence of user-generated content (UGC) on platforms such as YouTube and TikTok has rendered no-reference (NR) perceptual video quality assessment (VQA) vital for optimizing video delivery. Nonetheless, the characteristics of non-professional acquisition and the subsequent transcoding of UGC video on sharing platforms present significant challenges for NR-VQA. Although NR-VQA models attempt to infer mean opinion scores (MOS), their modeling of subjective scores for compressed content remains limited due to the absence of fine-grained perceptual annotations of artifact types. To address these challenges, we propose CAMP-VQA, a novel NR-VQA framework that exploits the semantic understanding capabilities of large vision-language models. Our approach introduces a quality-aware prompting mechanism that integrates video metadata (e.g., resolution, frame rate, bitrate) with key fragments extracted from inter-frame variations to guide the BLIP-2 pretraining approach in generating fine-grained quality captions. A unified architecture has been designed to model perceptual quality across three dimensions: semantic alignment, temporal characteristics, and spatial characteristics. These multimodal features are extracted and fused, then regressed to video quality scores. Extensive experiments on a wide variety of UGC datasets demonstrate that our model consistently outperforms existing NR-VQA methods, achieving improved accuracy without the need for costly manual fine-grained annotations. Our method achieves the best performance in terms of average rank and linear correlation (SRCC: 0.928, PLCC: 0.938) compared to state-of-the-art methods. The source code and trained models, along with a user-friendly demo, are available at: https://github.com/xinyiW915/CAMP-VQA.

  • 4 authors
·
Nov 10, 2025

Loreley: Repository-Scale Program Evolution with Quality-Diversity Search

Sequential agent search accumulates changes from its current champion but discards alternative branches; independent proposals preserve breadth but restart from the root. Loreley instead retains complete repository states in a Quality-Diversity (QD) archive and samples them as parents or supplies them as context for later edits. Candidates are Git commits produced in isolated worktrees and judged by a project-supplied evaluator. We compare configured Loreley QD, sequential champion editing, and independent root proposals in a matched Zstandard experiment: seven paired blocks and 48 physical candidate jobs per policy and block (1,008 total), with root-only initialization and each policy's native concurrency. Validation selected a winner at each budget checkpoint; an agent-hidden holdout measured the fixed candidate. At 48 jobs, QD was 0.135% below Sequential Champion (95% BCa interval for the paired effect: -0.556% to +0.161%) and 0.320% above Independent Root (-0.082% to +0.686%). Neither contrast established a QD advantage; Sequential had the highest observed 48-job mean and median. Archive retention and later sampling did occur. Four of seven final QD winners had a non-incumbent state in their primary-parent ancestry under a retrospective one-incumbent rule applied only to the observed QD stream. Including inspiration edges raised the count to six, without showing that supplied context caused an edit. Three earlier capability campaigns produced generation-4, multi-file improvements in two Python libraries and a separate Zstandard revision. Loreley engaged the intended stepping-stone mechanism, but the controlled experiment did not show an endpoint benefit at 48 jobs.

  • 1 authors
·
Aug 19