Daily Papers

Linear probing and activation steering use linear directions to predict and control behavior-level concepts such as correctness, safety, and social bias in question answering. We call these behavior-level concept directions. Drawing on the Linear Representation Hypothesis (LRH) and circuit studies, these directions are often interpreted as concept representations. Yet controlled evidence for linear concept structure and local mechanisms does not establish that these directions represent the intended behavioral concepts, leaving probing and steering without a unified theoretical account. We propose the Answer-Basin Representation Hypothesis (ABRH): the model's own answer measure organizes the linear structure of these directions. For each question, all continuations yielding the same answer form an answer basin, whose mass is their total probability; these masses define the model's answer distribution. ABRH posits that its concentration before generation and the relative mass of each answer after generation are represented along linear directions shared across questions. Experiments span four Qwen2.5 and Gemma-3 models on correctness, social bias, and safety tasks. Decoupling concept labels from basin mass shows that probing and steering exhibit concept-consistent effects when labels align with mass orderings, weaken as mass gaps shrink, and reverse under conflict. Probes trained solely on mass orderings among wrong answers still select correct answers; a fixed steering vector can instead favor wrong answers when labels conflict with mass orderings. These results support an answer-measure account of behavior-level concept directions and of when probing and steering succeed, fail, or reverse.

Circuit extraction identifies a small set of model components whose presence preserves a target behavior under ablation, and the resulting circuit is often read as the mechanism behind that behavior. We argue that this reading is under-determined: preserving behavior does not single out one circuit, because the claim it supports depends on which circuit is reported and how two circuits are compared. We make this concrete in a synthetic Lean tactic-prediction benchmark -- predicting the next step of a proof -- where fixed proof rules with randomized surface form let differences between extracted circuits be attributed to these choices rather than to the task. Across dense and weight-sparse checkpoints (most weights constrained to zero) of the same transformer, evaluated on atomic (single-rule) and compositional (multi-rule) proofs, we vary which extracted object is reported (a compact prediction-preserving circuit, a broader graph that also keeps surrounding read, write, and routing structure, or the smallest subgraph meeting a post-ablation loss threshold), and whether each attention head's query and key are represented jointly or separately. Exact component-to-component edge overlap is low and sensitive to these choices, at times dropping to a random baseline, while two coarser summaries stay stable: the set of selected attention heads, and the circuit-size ranking of conditions that differ in which supervised checkpoint initializes reinforcement learning (RL). The largest accuracy gains from RL on compositional proofs come with the most structure beyond the atomic circuits. A circuit-level claim is therefore well defined only once one states which circuit is reported, the pruning threshold used to extract it, and the level at which circuits are compared. We distill these requirements into a reporting practice for circuit-extraction studies.

Most currently deployed large language models (LLMs) undergo continuous training or additional finetuning. By contrast, most research into LLMs' internal mechanisms focuses on models at one snapshot in time (the end of pre-training), raising the question of whether their results generalize to real-world settings. Existing studies of mechanisms over time focus on encoder-only or toy models, which differ significantly from most deployed models. In this study, we track how model mechanisms, operationalized as circuits, emerge and evolve across 300 billion tokens of training in decoder-only LLMs, in models ranging from 70 million to 2.8 billion parameters. We find that task abilities and the functional components that support them emerge consistently at similar token counts across scale. Moreover, although such components may be implemented by different attention heads over time, the overarching algorithm that they implement remains. Surprisingly, both these algorithms and the types of components involved therein can replicate across model scale. These results suggest that circuit analyses conducted on small models at the end of pre-training can provide insights that still apply after additional pre-training and over model scale.

Many recent language model (LM) interpretability studies have adopted the circuits framework, which aims to find the minimal computational subgraph, or circuit, that explains LM behavior on a given task. Most studies determine which edges belong in a LM's circuit by performing causal interventions on each edge independently, but this scales poorly with model size. Edge attribution patching (EAP), gradient-based approximation to interventions, has emerged as a scalable but imperfect solution to this problem. In this paper, we introduce a new method - EAP with integrated gradients (EAP-IG) - that aims to better maintain a core property of circuits: faithfulness. A circuit is faithful if all model edges outside the circuit can be ablated without changing the model's performance on the task; faithfulness is what justifies studying circuits, rather than the full model. Our experiments demonstrate that circuits found using EAP are less faithful than those found using EAP-IG, even though both have high node overlap with circuits found previously using causal interventions. We conclude more generally that when using circuits to compare the mechanisms models use to solve tasks, faithfulness, not overlap, is what should be measured.

Graph neural networks (GNNs) are increasingly applied to physical design tasks such as congestion prediction and wirelength estimation, yet progress is hindered by inconsistent circuit representations and the absence of controlled evaluation protocols. We present R2G (RTL-to-GDSII), a multi-view circuit-graph benchmark suite that standardizes five stage-aware views with information parity (every view encodes the same attribute set, differing only in where features attach) over 30 open-source IP cores (up to 10^6 nodes/edges). R2G provides an end-to-end DEF-to-graph pipeline spanning synthesis, placement, and routing stages, together with loaders, unified splits, domain metrics, and reproducible baselines. By decoupling representation choice from model choice, R2G isolates a confound that prior EDA and graph-ML benchmarks leave uncontrolled. In systematic studies with GINE, GAT, and ResGatedGCN, we find: (i) view choice dominates model choice, with Test R^2 varying by more than 0.3 across representations for a fixed GNN; (ii) node-centric views generalize best across both placement and routing; and (iii) decoder-head depth (3--4 layers) is the primary accuracy driver, turning divergent training into near-perfect predictions (R^2>0.99). Code and datasets are available at https://github.com/ShenShan123/R2G.

Machine unlearning is becoming essential for building trustworthy and compliant language models. Yet unlearning success varies considerably across individual samples: some are reliably erased, while others persist despite the same procedure. We argue that this disparity is not only a data-side phenomenon, but also reflects model-internal mechanisms that encode and protect memorized information. We study this problem from a mechanistic perspective based on model circuits--structured interaction pathways that govern how predictions are formed. We propose Circuit-guided Unlearning Difficulty (CUD), a {\em pre-unlearning} metric that assigns each sample a continuous difficulty score using circuit-level signals. Extensive experiments demonstrate that CUD reliably separates intrinsically easy and hard samples, and remains stable across unlearning methods. We identify key circuit-level patterns that reveal a mechanistic signature of difficulty: easy-to-unlearn samples are associated with shorter, shallower interactions concentrated in earlier-to-intermediate parts of the original model, whereas hard samples rely on longer and deeper pathways closer to late-stage computation. Compared to existing qualitative studies, CUD takes a first step toward a principled, fine-grained, and interpretable analysis of unlearning difficulty; and motivates the development of unlearning methods grounded in model mechanisms.

Many papers have shown that attention heads work in conjunction with each other to perform complex tasks. It's frequently assumed that communication between attention heads is via the addition of specific features to token residuals. In this work we seek to isolate and identify the features used to effect communication and coordination among attention heads in GPT-2 small. Our key leverage on the problem is to show that these features are very often sparsely coded in the singular vectors of attention head matrices. We characterize the dimensionality and occurrence of these signals across the attention heads in GPT-2 small when used for the Indirect Object Identification (IOI) task. The sparse encoding of signals, as provided by attention head singular vectors, allows for efficient separation of signals from the residual background and straightforward identification of communication paths between attention heads. We explore the effectiveness of this approach by tracing portions of the circuits used in the IOI task. Our traces reveal considerable detail not present in previous studies, shedding light on the nature of redundant paths present in GPT-2. And our traces go beyond previous work by identifying features used to communicate between attention heads when performing IOI.

Recent advancements in large language models (LLMs) have led to significant successes across various applications, where the most noticeable is to a series of emerging capabilities, particularly in the areas of In-Context Learning (ICL) and Chain-of-Thought (CoT). To better understand and control model performance, many studies have begun investigating the underlying causes of these phenomena and their impact on task outcomes. However, existing explanatory frameworks predominantly focus on isolating and explaining ICL and CoT independently, leading to an incomplete understanding of their combined influence on model performance. To address this gap, we propose the Electronic Circuit Model (ECM), which provides a foundation for developing scalable, learnable policies and improving the management of AI-generated content. Specifically, ECM conceptualizes model behavior as an electronic circuit: ICL is represented as semantic magnetic field to providing an additional voltage following Faraday's Law, while CoT is modeled as series resistors to constrain the model output performance following Ohm's Law. Experimental results demonstrate that the ECM effectively predicts and explains LLM performance across a variety of prompting strategies. Furthermore, we apply ECM to advanced reasoning strategy optimization on a series of tasks, such as the International Olympiad in Informatics (IOI) and the International Mathematical Olympiad (IMO), achieving competitive performance that surpasses nearly 80% of top human competitors.

The massive and large-scale design of foundational semiconductor integrated circuits (ICs) is crucial to sustaining the advancement of many emerging and future technologies, such as generative AI, 5G/6G, and quantum computing. Excitingly, recent studies have shown the great capabilities of foundational models in expediting the design of digital ICs. Yet, applying generative AI techniques to accelerate the design of analog ICs remains a significant challenge due to critical domain-specific issues, such as the lack of a comprehensive dataset and effective representation methods for analog circuits. This paper proposes, AnalogGenie, a textbf{Gen}erattextbf{i}ve textbf{e}ngine for automatic design/discovery of textbf{Analog} circuit topologies--the most challenging and creative task in the conventional manual design flow of analog ICs. AnalogGenie addresses two key gaps in the field: building a foundational comprehensive dataset of analog circuit topology and developing a scalable sequence-based graph representation universal to analog circuits. Experimental results show the remarkable generation performance of AnalogGenie in broadening the variety of analog ICs, increasing the number of devices within a single design, and discovering unseen circuit topologies far beyond any prior arts. Our work paves the way to transform the longstanding time-consuming manual design flow of analog ICs to an automatic and massive manner powered by generative AI. Our source code is available at https://github.com/xz-group/AnalogGenie.

This paper describes a method combining Bayesian optimization (BO) and a lamped-capacitance thermal circuit network model that is effective for speeding up the thermal design optimization of an electronic circuit board layout with transient heating chips. As electronic devices have become smaller and more complex, the importance of thermal design optimization to ensure heat dissipation performance has increased. However, such thermal design optimization is difficult because it is necessary to consider various trade-offs associated with packaging and transient temperature changes of heat-generating components. This study aims to improve the performance of thermal design optimization by artificial intelligence. BO using a Gaussian process was combined with the lamped-capacitance thermal circuit network model, and its performance was verified by case studies. As a result, BO successfully found the ideal circuit board layout as well as particle swarm optimization (PSO) and genetic algorithm (GA) could. The CPU time for BO was 1/5 and 1/4 of that for PSO and GA, respectively. In addition, BO found a non-intuitive optimal solution in approximately 7 minutes from 10 million layout patterns. It was estimated that this was 1/1000 of the CPU time required for analyzing all layout patterns.

Mechanistic interpretability work attempts to reverse engineer the learned algorithms present inside neural networks. One focus of this work has been to discover 'circuits' -- subgraphs of the full model that explain behaviour on specific tasks. But how do we measure the performance of such circuits? Prior work has attempted to measure circuit 'faithfulness' -- the degree to which the circuit replicates the performance of the full model. In this work, we survey many considerations for designing experiments that measure circuit faithfulness by ablating portions of the model's computation. Concerningly, we find existing methods are highly sensitive to seemingly insignificant changes in the ablation methodology. We conclude that existing circuit faithfulness scores reflect both the methodological choices of researchers as well as the actual components of the circuit - the task a circuit is required to perform depends on the ablation used to test it. The ultimate goal of mechanistic interpretability work is to understand neural networks, so we emphasize the need for more clarity in the precise claims being made about circuits. We open source a library at https://github.com/UFO-101/auto-circuit that includes highly efficient implementations of a wide range of ablation methodologies and circuit discovery algorithms.

A widely used strategy to discover and understand language model mechanisms is circuit analysis. A circuit is a minimal subgraph of a model's computation graph that executes a specific task. We identify a gap in existing circuit discovery methods: they assume circuits are position-invariant, treating model components as equally relevant across input positions. This limits their ability to capture cross-positional interactions or mechanisms that vary across positions. To address this gap, we propose two improvements to incorporate positionality into circuits, even on tasks containing variable-length examples. First, we extend edge attribution patching, a gradient-based method for circuit discovery, to differentiate between token positions. Second, we introduce the concept of a dataset schema, which defines token spans with similar semantics across examples, enabling position-aware circuit discovery in datasets with variable length examples. We additionally develop an automated pipeline for schema generation and application using large language models. Our approach enables fully automated discovery of position-sensitive circuits, yielding better trade-offs between circuit size and faithfulness compared to prior work.

In theoretical neuroscience, recent work leverages deep learning tools to explore how some network attributes critically influence its learning dynamics. Notably, initial weight distributions with small (resp. large) variance may yield a rich (resp. lazy) regime, where significant (resp. minor) changes to network states and representation are observed over the course of learning. However, in biology, neural circuit connectivity could exhibit a low-rank structure and therefore differs markedly from the random initializations generally used for these studies. As such, here we investigate how the structure of the initial weights -- in particular their effective rank -- influences the network learning regime. Through both empirical and theoretical analyses, we discover that high-rank initializations typically yield smaller network changes indicative of lazier learning, a finding we also confirm with experimentally-driven initial connectivity in recurrent neural networks. Conversely, low-rank initialization biases learning towards richer learning. Importantly, however, as an exception to this rule, we find lazier learning can still occur with a low-rank initialization that aligns with task and data statistics. Our research highlights the pivotal role of initial weight structures in shaping learning regimes, with implications for metabolic costs of plasticity and risks of catastrophic forgetting.

Circuit analysis of any certain model behavior is a central task in mechanistic interpretability. We introduce our circuit discovery pipeline with Sparse Autoencoders (SAEs) and a variant called Transcoders. With these two modules inserted into the model, the model's computation graph with respect to OV and MLP circuits becomes strictly linear. Our methods do not require linear approximation to compute the causal effect of each node. This fine-grained graph identifies both end-to-end and local circuits accounting for either logits or intermediate features. We can scalably apply this pipeline with a technique called Hierarchical Attribution. We analyze three kinds of circuits in GPT-2 Small: bracket, induction, and Indirect Object Identification circuits. Our results reveal new findings underlying existing discoveries.

Generating accurate circuit schematics from high-level natural language descriptions remains a persistent challenge in electronics design, as large language models (LLMs) frequently hallucinate in granular details, violate electrical constraints, and produce non-machine-readable outputs. We present CircuitLM, a novel multi-agent LLM-aided circuit design pipeline that translates user prompts into structured, visually interpretable CircuitJSON schematics through five sequential stages: (i) LLM-based component identification, (ii) canonical pinout retrieval, (iii) chain-of-thought reasoning by an electronics expert agent, (iv) JSON schematic synthesis, and (v) force-directed SVG visualization. Anchored by a curated, embedding-powered component knowledge base. While LLMs often violate electrical constraints, CircuitLM bridges this gap by grounding generation in a verified and dynamically extensible component database, initially comprising 50 components. To ensure safety, we incorporate a hybrid evaluation framework, namely Dual-Metric Circuit Validation (DMCV), validated against human-expert assessments, which achieves high fidelity in microcontroller-centric designs. We evaluate the system on 100 diverse embedded-systems prompts across six LLMs and introduce DMCV to assess both structural and electrical validity. This work bridges natural language input to deployable hardware designs, enabling reliable circuit prototyping by non-experts. Our code and data will be made public upon acceptance.

Circuit link prediction, which identifies missing component connections from incomplete netlists, is crucial in analog circuit design automation. However, existing methods face three main challenges: 1) Insufficient use of topological patterns in circuit graphs reduces prediction accuracy; 2) Data scarcity due to the complexity of annotations hinders model generalization; 3) Limited adaptability to various netlist formats restricts model flexibility. We propose Graph Neural Networks Based Analog Circuit Link Prediction (GNN-ACLP), a graph neural networks (GNNs) based method featuring three innovations to tackle these challenges. First, we introduce the SEAL (learning from Subgraphs, Embeddings, and Attributes for Link prediction) framework and achieve port-level accuracy in circuit link prediction. Second, we propose Netlist Babel Fish, a netlist format conversion tool that leverages retrieval-augmented generation (RAG) with a large language model (LLM) to enhance the compatibility of netlist formats. Finally, we build a comprehensive dataset, SpiceNetlist, comprising 775 annotated circuits of 7 different types across 10 component classes. Experiments demonstrate accuracy improvements of 16.08% on SpiceNetlist, 11.38% on Image2Net, and 16.01% on Masala-CHAI compared to the baseline in intra-dataset evaluation, while maintaining accuracy from 92.05% to 99.07% in cross-dataset evaluation, demonstrating robust feature transfer capabilities. However, its linear computational complexity makes processing large-scale netlists challenging and requires future addressing.

Understanding how neural networks arrive at their predictions is essential for debugging, auditing, and deployment. Mechanistic interpretability pursues this goal by identifying circuits--minimal subnetworks responsible for specific behaviors. However, existing circuit discovery methods are brittle: circuits depend strongly on the chosen concept dataset and often fail to transfer out-of-distribution, raising doubts whether they capture the concept or merely dataset-specific artifacts. We introduce Certified Circuits, which provide provable stability guarantees for circuit discovery. Our framework wraps any black-box discovery algorithm with randomized data subsampling to certify that inclusion decisions over circuit components--neurons or edges of the model graph, depending on the base algorithm--are invariant to bounded edit-distance perturbations of the concept dataset. Unstable components are abstained from, yielding circuits that are more compact and more accurate. We validate across three architectures (ResNet, ViT, GPT-2) on vision (ImageNet and four OOD datasets) and language (IOI, IOI-Hard, Greater-Than) tasks. Certified circuits achieve up to 56% higher accuracy and up to 80% fewer components, and remain reliable where baselines degrade. Certified Circuits puts circuit discovery on formal ground by producing mechanistic explanations that are provably stable and better aligned with the target concept. Code: https://github.com/AlaaAnani/certified-circuits.

The fields of explainable AI and mechanistic interpretability aim to uncover the internal structure of neural networks, with circuit discovery as a central tool for understanding model computations. Existing approaches, however, rely on manual inspection and remain limited to toy tasks. Automated interpretability offers scalability by analyzing isolated features and their activations, but it often misses interactions between features and depends strongly on external LLMs and dataset quality. Transcoders have recently made it possible to separate feature attributions into input-dependent and input-invariant components, providing a foundation for more systematic circuit analysis. Building on this, we propose WeightLens and CircuitLens, two complementary methods that go beyond activation-based analysis. WeightLens interprets features directly from their learned weights, removing the need for explainer models or datasets while matching or exceeding the performance of existing methods on context-independent features. CircuitLens captures how feature activations arise from interactions between components, revealing circuit-level dynamics that activation-only approaches cannot identify. Together, these methods increase interpretability robustness and enhance scalable mechanistic analysis of circuits while maintaining efficiency and quality.

Engineering design operates through hierarchical abstraction from system specifications to component implementations, requiring visual understanding coupled with mathematical reasoning at each level. While Multi-modal Large Language Models (MLLMs) excel at natural image tasks, their ability to extract mathematical models from technical diagrams remains unexplored. We present CircuitSense, a comprehensive benchmark evaluating circuit understanding across this hierarchy through 8,006+ problems spanning component-level schematics to system-level block diagrams. Our benchmark uniquely examines the complete engineering workflow: Perception, Analysis, and Design, with a particular emphasis on the critical but underexplored capability of deriving symbolic equations from visual inputs. We introduce a hierarchical synthetic generation pipeline consisting of a grid-based schematic generator and a block diagram generator with auto-derived symbolic equation labels. Comprehensive evaluation of six state-of-the-art MLLMs, including both closed-source and open-source models, reveals fundamental limitations in visual-to-mathematical reasoning. Closed-source models achieve over 85\% accuracy on perception tasks involving component recognition and topology identification, yet their performance on symbolic derivation and analytical reasoning falls below 19\%, exposing a critical gap between visual parsing and symbolic reasoning. Models with stronger symbolic reasoning capabilities consistently achieve higher design task accuracy, confirming the fundamental role of mathematical understanding in circuit synthesis and establishing symbolic reasoning as the key metric for engineering competence.

While interpretability research has shed light on some internal algorithms utilized by transformer-based LLMs, reasoning in natural language, with its deep contextuality and ambiguity, defies easy categorization. As a result, formulating clear and motivating questions for circuit analysis that rely on well-defined in-domain and out-of-domain examples required for causal interventions is challenging. Although significant work has investigated circuits for specific tasks, such as indirect object identification (IOI), deciphering natural language reasoning through circuits remains difficult due to its inherent complexity. In this work, we take initial steps to characterize causal reasoning in LLMs by analyzing clear-cut cause-and-effect sentences like "I opened an umbrella because it started raining," where causal interventions may be possible through carefully crafted scenarios using GPT-2 small. Our findings indicate that causal syntax is localized within the first 2-3 layers, while certain heads in later layers exhibit heightened sensitivity to nonsensical variations of causal sentences. This suggests that models may infer reasoning by (1) detecting syntactic cues and (2) isolating distinct heads in the final layers that focus on semantic relationships.

Explaining why a language model produces a particular output requires local, input-level explanations. Existing methods uncover global capability circuits (e.g., indirect object identification), but not why the model answers a specific input query in a particular way. We introduce query circuits, which directly trace the information flow inside a model that maps a specific input to the output. Unlike surrogate-based approaches (e.g., sparse autoencoders), query circuits are identified within the model itself, resulting in more faithful and computationally accessible explanations. To make query circuits practical, we address two challenges. First, we introduce Normalized Deviation Faithfulness (NDF), a robust metric to evaluate how well a discovered circuit recovers the model's decision for a specific input, and is broadly applicable to circuit discovery beyond our setting. Second, we develop sampling-based methods to efficiently identify circuits that are sparse yet faithfully describe the model's behavior. Across benchmarks (IOI, arithmetic, MMLU, and ARC), we find that there exist extremely sparse query circuits within the model that can recover much of its performance on single queries. For example, a circuit covering only 1.3% of model connections can recover about 60% of performance on an MMLU questions. Overall, query circuits provide a step towards faithful, scalable explanations of how language models process individual inputs. The project page is at https://tony10101105.github.io/query-circuit/.

The deployment of Large Language Models (LLMs) for specialized engineering domains, such as circuit analysis, often faces a trade-off between reasoning accuracy and computational efficiency. Traditional evaluation methods treat model performance as a flat metric, failing to account for the hierarchical nature of engineering knowledge. We propose a performance-aware model compression strategy that utilizes prerequisite graphs to optimize model selection for circuit analysis tasks. By structuring electronics design concepts as Directed Acyclic Graphs (DAGs), we can identify the specific complexity horizons of an LLM's compressed variants' tiers. Our framework introduces an agentic pipeline for generating prerequisite-based datasets and a strategic evaluation engine that dynamically cascades queries across a spectrum of compressed variants of an LLM. This approach allows to select the smallest compressed model, given its conceptual knowledge boundaries in circuit analysis. Experimental results on analog electronics datasets demonstrate that prerequisite graphs provide a granular map of model compression with respect to the performance given circuit analysis complexity. (Source Code: https://github.com/pacomesimon/LLM_prereq_graphs_circuit_analysis, Demo: https://huggingface.co/spaces/pacomesimon/LLM_prereq_graphs_circuit_analysis)

Printed Circuit Board (PCB) schematic design plays an essential role in all areas of electronic industries. Unlike prior works that focus on digital or analog circuits alone, PCB design must handle heterogeneous digital, analog, and power signals while adhering to real-world IC packages and pin constraints. Automated PCB schematic design remains unexplored due to the scarcity of open-source data and the absence of simulation-based verification. We introduce PCBSchemaGen, the first training-free framework for PCB schematic design that comprises LLM agent and Constraint-guided synthesis. Our approach makes three contributions: 1. an LLM-based code generation paradigm with iterative feedback with domain-specific prompts. 2. a verification framework leveraging a real-world IC datasheet derived Knowledge Graph (KG) and Subgraph Isomorphism encoding pin-role semantics and topological constraints. 3. an extensive experiment on 23 PCB schematic tasks spanning digital, analog, and power domains. Results demonstrate that PCBSchemaGen significantly improves design accuracy and computational efficiency.

Automated interpretability research has recently attracted attention as a potential research direction that could scale explanations of neural network behavior to large models. Existing automated circuit discovery work applies activation patching to identify subnetworks responsible for solving specific tasks (circuits). In this work, we show that a simple method based on attribution patching outperforms all existing methods while requiring just two forward passes and a backward pass. We apply a linear approximation to activation patching to estimate the importance of each edge in the computational subgraph. Using this approximation, we prune the least important edges of the network. We survey the performance and limitations of this method, finding that averaged over all tasks our method has greater AUC from circuit recovery than other methods.

Graph representation learning on Analog-Mixed Signal (AMS) circuits is crucial for various downstream tasks, e.g., parasitic estimation. However, the scarcity of design data, the unbalanced distribution of labels, and the inherent diversity of circuit implementations pose significant challenges to learning robust and transferable circuit representations. To address these limitations, we propose CircuitGCL, a novel graph contrastive learning framework that integrates representation scattering and label rebalancing to enhance transferability across heterogeneous circuit graphs. CircuitGCL employs a self-supervised strategy to learn topology-invariant node embeddings through hyperspherical representation scattering, eliminating dependency on large-scale data. Simultaneously, balanced mean squared error (BMSE) and balanced softmax cross-entropy (BSCE) losses are introduced to mitigate label distribution disparities between circuits, enabling robust and transferable parasitic estimation. Evaluated on parasitic capacitance estimation (edge-level task) and ground capacitance classification (node-level task) across TSMC 28nm AMS designs, CircuitGCL outperforms all state-of-the-art (SOTA) methods, with the R^2 improvement of 33.64% sim 44.20% for edge regression and F1-score gain of 0.9times sim 2.1times for node classification. Our code is available at https://github.com/ShenShan123/CircuitGCL.

*Automated circuit discovery* is a central tool in mechanistic interpretability for identifying the internal components of neural networks responsible for specific behaviors. While prior methods have made significant progress, they typically depend on heuristics or approximations and do not offer provable guarantees over continuous input domains for the resulting circuits. In this work, we leverage recent advances in neural network verification to propose a suite of automated algorithms that yield circuits with *provable guarantees*. We focus on three types of guarantees: (1) *input domain robustness*, ensuring the circuit agrees with the model across a continuous input region; (2) *robust patching*, certifying circuit alignment under continuous patching perturbations; and (3) *minimality*, formalizing and capturing a wide array of various notions of succinctness. Interestingly, we uncover a diverse set of novel theoretical connections among these three families of guarantees, with critical implications for the convergence of our algorithms. Finally, we conduct experiments with state-of-the-art verifiers on various vision models, showing that our algorithms yield circuits with substantially stronger robustness guarantees than standard circuit discovery methods, establishing a principled foundation for provable circuit discovery.

Through considerable effort and intuition, several recent works have reverse-engineered nontrivial behaviors of transformer models. This paper systematizes the mechanistic interpretability process they followed. First, researchers choose a metric and dataset that elicit the desired model behavior. Then, they apply activation patching to find which abstract neural network units are involved in the behavior. By varying the dataset, metric, and units under investigation, researchers can understand the functionality of each component. We automate one of the process' steps: to identify the circuit that implements the specified behavior in the model's computational graph. We propose several algorithms and reproduce previous interpretability results to validate them. For example, the ACDC algorithm rediscovered 5/5 of the component types in a circuit in GPT-2 Small that computes the Greater-Than operation. ACDC selected 68 of the 32,000 edges in GPT-2 Small, all of which were manually found by previous work. Our code is available at https://github.com/ArthurConmy/Automatic-Circuit-Discovery.

A key goal in mechanistic interpretability is circuit analysis: finding sparse subgraphs of models corresponding to specific behaviors or capabilities. However, MLP sublayers make fine-grained circuit analysis on transformer-based language models difficult. In particular, interpretable features -- such as those found by sparse autoencoders (SAEs) -- are typically linear combinations of extremely many neurons, each with its own nonlinearity to account for. Circuit analysis in this setting thus either yields intractably large circuits or fails to disentangle local and global behavior. To address this we explore transcoders, which seek to faithfully approximate a densely activating MLP layer with a wider, sparsely-activating MLP layer. We successfully train transcoders on language models with 120M, 410M, and 1.4B parameters, and find them to perform at least on par with SAEs in terms of sparsity, faithfulness, and human-interpretability. We then introduce a novel method for using transcoders to perform weights-based circuit analysis through MLP sublayers. The resulting circuits neatly factorize into input-dependent and input-invariant terms. Finally, we apply transcoders to reverse-engineer unknown circuits in the model, and we obtain novel insights regarding the greater-than circuit in GPT2-small. Our results suggest that transcoders can prove effective in decomposing model computations involving MLPs into interpretable circuits. Code is available at https://github.com/jacobdunefsky/transcoder_circuits.

The automation of analog integrated circuit (IC) design remains a longstanding challenge, primarily due to the intricate interdependencies among physical layout, parasitic effects, and circuit-level performance. These interactions impose complex constraints that are difficult to accurately capture and optimize using conventional design methodologies. Although recent advances in machine learning (ML) have shown promise in automating specific stages of the analog design flow, the development of holistic, end-to-end frameworks that integrate these stages and iteratively refine layouts using post-layout, parasitic-aware performance feedback is still in its early stages. Furthermore, progress in this direction is hindered by the limited availability of open, high-quality datasets tailored to the analog domain, restricting both the benchmarking and the generalizability of ML-based techniques. To address these limitations, we present OSIRIS, a scalable dataset generation pipeline for analog IC design. OSIRIS systematically explores the design space of analog circuits while producing comprehensive performance metrics and metadata, thereby enabling ML-driven research in electronic design automation (EDA). In addition, we release a dataset consisting of 87,100 circuit variations generated with OSIRIS, accompanied by a reinforcement learning (RL)-based baseline method that exploits OSIRIS for analog design optimization.

Analog IC design relies on human experts to search for parameters that satisfy circuit specifications with their experience and intuitions, which is highly labor intensive, time consuming and suboptimal. Machine learning is a promising tool to automate this process. However, supervised learning is difficult for this task due to the low availability of training data: 1) Circuit simulation is slow, thus generating large-scale dataset is time-consuming; 2) Most circuit designs are propitiatory IPs within individual IC companies, making it expensive to collect large-scale datasets. We propose Learning to Design Circuits (L2DC) to leverage reinforcement learning that learns to efficiently generate new circuits data and to optimize circuits. We fix the schematic, and optimize the parameters of the transistors automatically by training an RL agent with no prior knowledge about optimizing circuits. After iteratively getting observations, generating a new set of transistor parameters, getting a reward, and adjusting the model, L2DC is able to optimize circuits. We evaluate L2DC on two transimpedance amplifiers. Trained for a day, our RL agent can achieve comparable or better performance than human experts trained for a quarter. It first learns to meet hard-constraints (eg. gain, bandwidth), and then learns to optimize good-to-have targets (eg. area, power). Compared with grid search-aided human design, L2DC can achieve 250times higher sample efficiency with comparable performance. Under the same runtime constraint, the performance of L2DC is also better than Bayesian Optimization.

Logic synthesis, a critical stage in electronic design automation (EDA), optimizes gate-level circuits to minimize power consumption and area occupancy in integrated circuits (ICs). Traditional logic synthesis tools rely on human-designed heuristics, often yielding suboptimal results. Although differentiable architecture search (DAS) has shown promise in generating circuits from truth tables, it faces challenges such as high computational complexity, convergence to local optima, and extensive hyperparameter tuning. Consequently, we propose a novel approach integrating conditional generative models with DAS for circuit generation. Our approach first introduces CircuitVQ, a circuit tokenizer trained based on our Circuit AutoEncoder We then develop CircuitAR, a masked autoregressive model leveraging CircuitVQ as the tokenizer. CircuitAR can generate preliminary circuit structures from truth tables, which guide DAS in producing functionally equivalent circuits. Notably, we observe the scalability and emergent capability in generating complex circuit structures of our CircuitAR models. Extensive experiments also show the superior performance of our method. This research bridges the gap between probabilistic generative models and precise circuit generation, offering a robust solution for logic synthesis.

The integration of artificial intelligence into computer-aided design frameworks has sparked a shift in the design of analog integrated circuits (ICs), transitioning the field from using manual and algorithmic-based solutions to adopting automated and intelligent paradigms. In this scenario, the GDSII file represents the industry-standard database containing the ultimate and most accurate source of information of the analog circuit, encapsulating the complex physical geometries and parasitic realities that define tape out performance. This paper proposes a novel framework that combines fine-tuned LLMs and CNNs to analyze GDSII files of analog circuits, enabling a conversational interface between the tool and the designers. Experimental results using thousands of analog designs across four realistic tasks demonstrate that the proposed solution outperforms state-of-the-art general-purpose massive VLMs by a significant margin (up to 81%), thus providing a lightweight solution to the problem of GDSII analysis.

The path to interpreting a language model often proceeds via analysis of circuits -- sparse computational subgraphs of the model that capture specific aspects of its behavior. Recent work has automated the task of discovering circuits. Yet, these methods have practical limitations, as they rely either on inefficient search algorithms or inaccurate approximations. In this paper, we frame automated circuit discovery as an optimization problem and propose *Edge Pruning* as an effective and scalable solution. Edge Pruning leverages gradient-based pruning techniques, but instead of removing neurons or components, it prunes the edges between components. Our method finds circuits in GPT-2 that use less than half the number of edges compared to circuits found by previous methods while being equally faithful to the full model predictions on standard circuit-finding tasks. Edge Pruning is efficient even with as many as 100K examples, outperforming previous methods in speed and producing substantially better circuits. It also perfectly recovers the ground-truth circuits in two models compiled with Tracr. Thanks to its efficiency, we scale Edge Pruning to CodeLlama-13B, a model over 100x the scale that prior methods operate on. We use this setting for a case study comparing the mechanisms behind instruction prompting and in-context learning. We find two circuits with more than 99.96% sparsity that match the performance of the full model and reveal that the mechanisms in the two settings overlap substantially. Our case study shows that Edge Pruning is a practical and scalable tool for interpretability and sheds light on behaviors that only emerge in large models.

IR drop analysis is essential in physical chip design to ensure the power integrity of on-chip power delivery networks. Traditional Electronic Design Automation (EDA) tools have become slow and expensive as transistor density scales. Recent works have introduced machine learning (ML)-based methods that formulate IR drop analysis as an image prediction problem. These existing ML approaches fail to capture both local and long-range dependencies and ignore crucial geometrical and topological information from physical layouts and logical connectivity. To address these limitations, we propose GIF, a Generative IR drop Framework that uses both geometrical and topological information to generate IR drop images. GIF fuses image and graph features to guide a conditional diffusion process, producing high-quality IR drop images. For instance, On the CircuitNet-N28 dataset, GIF achieves 0.78 SSIM, 0.95 Pearson correlation, 21.77 PSNR, and 0.026 NMAE, outperforming prior methods. These results demonstrate that our framework, using diffusion based multimodal conditioning, reliably generates high quality IR drop images. This shows that IR drop analysis can effectively leverage recent advances in generative modeling when geometric layout features and logical circuit topology are jointly modeled. By combining geometry aware spatial features with logical graph representations, GIF enables IR drop analysis to benefit from recent advances in generative modeling for structured image generation.

Recent advances in large language models (LLMs) have opened new opportunities for recommender systems by enabling rich semantic understanding and reasoning about user interests and item attributes. However, as privacy regulations tighten, incorporating user data into LLM-based recommendation (LLMRec) introduces significant privacy risks, making unlearning algorithms increasingly crucial for practical deployment. Despite growing interest in LLMRec unlearning, most existing approaches formulate unlearning as a weighted combination of forgetting and retaining objectives while updating model parameters in a uniform manner. Such formulations inevitably induce gradient conflicts between the two objectives, leading to unstable optimization and resulting in either ineffective unlearning or severe degradation of model utility. Moreover, the unlearning procedure remains largely black-box, undermining its transparency and trustworthiness. To tackle these challenges, we propose CURE, a circuit-aware unlearning framework that disentangles model components into functionally distinct subsets and selectively updates them. Here, a circuit refers to a computational subgraph that is causally responsible for task-specific behaviors. Specifically, we extract the core circuits underlying item recommendation and analyze how individual modules within these circuits contribute to the forget and retain objectives. Based on this analysis, these modules are categorized into forget-specific, retain-specific, and task-shared groups, each subject to function-specific update rules to mitigate gradient conflicts during unlearning. Experiments on real-world datasets show that our approach achieves more effective unlearning than existing baselines.

We present an open-source database of superconducting quantum device designs that may be used as the starting point for customized devices. Each design can be generated programmatically using the open-source Qiskit Metal package, and simulated using finite-element electromagnetic solvers. We present a robust workflow for achieving high accuracy on design simulations. Many designs in the database are experimentally validated, showing excellent agreement between simulated and measured parameters. Our database includes a front-end interface that allows users to generate ``best-guess'' designs based on desired circuit parameters. This project lowers the barrier to entry for research groups seeking to make a new class of devices by providing them a well-characterized starting point from which to refine their designs.

Sparse dictionary learning has been a rapidly growing technique in mechanistic interpretability to attack superposition and extract more human-understandable features from model activations. We ask a further question based on the extracted more monosemantic features: How do we recognize circuits connecting the enormous amount of dictionary features? We propose a circuit discovery framework alternative to activation patching. Our framework suffers less from out-of-distribution and proves to be more efficient in terms of asymptotic complexity. The basic unit in our framework is dictionary features decomposed from all modules writing to the residual stream, including embedding, attention output and MLP output. Starting from any logit, dictionary feature or attention score, we manage to trace down to lower-level dictionary features of all tokens and compute their contribution to these more interpretable and local model behaviors. We dig in a small transformer trained on a synthetic task named Othello and find a number of human-understandable fine-grained circuits inside of it.

The usage of electronic devices increases, and becomes predominant in most aspects of life. Surface Mount Technology (SMT) is the most common industrial method for manufacturing electric devices in which electrical components are mounted directly onto the surface of a Printed Circuit Board (PCB). Although the expansion of electronic devices affects our lives in a productive way, failures or defects in the manufacturing procedure of those devices might also be counterproductive and even harmful in some cases. It is therefore desired and sometimes crucial to ensure zero-defect quality in electronic devices and their production. While traditional Image Processing (IP) techniques are not sufficient to produce a complete solution, other promising methods like Deep Learning (DL) might also be challenging for PCB inspection, mainly because such methods require big adequate datasets which are missing, not available or not updated in the rapidly growing field of PCBs. Thus, PCB inspection is conventionally performed manually by human experts. Unsupervised Learning (UL) methods may potentially be suitable for PCB inspection, having learning capabilities on the one hand, while not relying on large datasets on the other. In this paper, we introduce ChangeChip, an automated and integrated change detection system for defect detection in PCBs, from soldering defects to missing or misaligned electronic elements, based on Computer Vision (CV) and UL. We achieve good quality defect detection by applying an unsupervised change detection between images of a golden PCB (reference) and the inspected PCB under various setting. In this work, we also present CD-PCB, a synthesized labeled dataset of 20 pairs of PCB images for evaluation of defect detection algorithms.

We introduce methods for discovering and applying sparse feature circuits. These are causally implicated subnetworks of human-interpretable features for explaining language model behaviors. Circuits identified in prior work consist of polysemantic and difficult-to-interpret units like attention heads or neurons, rendering them unsuitable for many downstream applications. In contrast, sparse feature circuits enable detailed understanding of unanticipated mechanisms. Because they are based on fine-grained units, sparse feature circuits are useful for downstream tasks: We introduce SHIFT, where we improve the generalization of a classifier by ablating features that a human judges to be task-irrelevant. Finally, we demonstrate an entirely unsupervised and scalable interpretability pipeline by discovering thousands of sparse feature circuits for automatically discovered model behaviors.

Circuit analysis is a promising technique for understanding the internal mechanisms of language models. However, existing analyses are done in small models far from the state of the art. To address this, we present a case study of circuit analysis in the 70B Chinchilla model, aiming to test the scalability of circuit analysis. In particular, we study multiple-choice question answering, and investigate Chinchilla's capability to identify the correct answer label given knowledge of the correct answer text. We find that the existing techniques of logit attribution, attention pattern visualization, and activation patching naturally scale to Chinchilla, allowing us to identify and categorize a small set of `output nodes' (attention heads and MLPs). We further study the `correct letter' category of attention heads aiming to understand the semantics of their features, with mixed results. For normal multiple-choice question answers, we significantly compress the query, key and value subspaces of the head without loss of performance when operating on the answer labels for multiple-choice questions, and we show that the query and key subspaces represent an `Nth item in an enumeration' feature to at least some extent. However, when we attempt to use this explanation to understand the heads' behaviour on a more general distribution including randomized answer labels, we find that it is only a partial explanation, suggesting there is more to learn about the operation of `correct letter' heads on multiple choice question answering.

Printed circuit boards (PCBs) are fundamental to modern electronic systems, yet AI-driven PCB design automation remains constrained by the lack of large-scale paired schematic-netlist datasets. PCB schematics are particularly challenging due to diverse component types, complex wiring topologies, and noisy textual annotations. To address this gap, we present PCBnet, a large-scale PCB schematic dataset comprising over 300 real-world designs with annotated pins and paired SPICE netlists. It contains more than 50,000 component instances, 150,000 wires, 100,000 text regions, and 400,000 characters. We further develop an automated schematic-to-netlist pipeline that combines visual recognition, topology construction, and domain-knowledge-guided multi-agent correction. The proposed method achieves 94.54% component detection mAP, 98.57% text recognition accuracy, and 84.47% end-to-end connectivity accuracy. PCBnet provides a benchmark and data foundation for future AI-driven PCB design automation.

Data analytics and data science play a significant role in nowadays society. In the context of Smart Grids (SG), the collection of vast amounts of data has seen the emergence of a plethora of data analysis approaches. In this paper, we conduct a Systematic Mapping Study (SMS) aimed at getting insights about different facets of SG data analysis: application sub-domains (e.g., power load control), aspects covered (e.g., forecasting), used techniques (e.g., clustering), tool-support, research methods (e.g., experiments/simulations), replicability/reproducibility of research. The final goal is to provide a view of the current status of research. Overall, we found that each sub-domain has its peculiarities in terms of techniques, approaches and research methodologies applied. Simulations and experiments play a crucial role in many areas. The replicability of studies is limited concerning the provided implemented algorithms, and to a lower extent due to the usage of private datasets.

We introduce maximum likelihood fragment tomography (MLFT) as an improved circuit cutting technique for running clustered quantum circuits on quantum devices with a limited number of qubits. In addition to minimizing the classical computing overhead of circuit cutting methods, MLFT finds the most likely probability distribution for the output of a quantum circuit, given the measurement data obtained from the circuit's fragments. We demonstrate the benefits of MLFT for accurately estimating the output of a fragmented quantum circuit with numerical experiments on random unitary circuits. Finally, we show that circuit cutting can estimate the output of a clustered circuit with higher fidelity than full circuit execution, thereby motivating the use of circuit cutting as a standard tool for running clustered circuits on quantum hardware.

Current Chain-of-Thought (CoT) verification methods predict reasoning correctness based on outputs (black-box) or activations (gray-box), but offer limited insight into why a computation fails. We introduce a white-box method: Circuit-based Reasoning Verification (CRV). We hypothesize that attribution graphs of correct CoT steps, viewed as execution traces of the model's latent reasoning circuits, possess distinct structural fingerprints from those of incorrect steps. By training a classifier on structural features of these graphs, we show that these traces contain a powerful signal of reasoning errors. Our white-box approach yields novel scientific insights unattainable by other methods. (1) We demonstrate that structural signatures of error are highly predictive, establishing the viability of verifying reasoning directly via its computational graph. (2) We find these signatures to be highly domain-specific, revealing that failures in different reasoning tasks manifest as distinct computational patterns. (3) We provide evidence that these signatures are not merely correlational; by using our analysis to guide targeted interventions on individual transcoder features, we successfully correct the model's faulty reasoning. Our work shows that, by scrutinizing a model's computational process, we can move from simple error detection to a deeper, causal understanding of LLM reasoning.

Masala-CHAI is a fully automated framework leveraging large language models (LLMs) to generate Simulation Programs with Integrated Circuit Emphasis (SPICE) netlists. It addresses a long-standing challenge in circuit design automation: automating netlist generation for analog circuits. Automating this workflow could accelerate the creation of fine-tuned LLMs for analog circuit design and verification. In this work, we identify key challenges in automated netlist generation and evaluate multimodal capabilities of state-of-the-art LLMs, particularly GPT-4, in addressing them. We propose a three-step workflow to overcome existing limitations: labeling analog circuits, prompt tuning, and netlist verification. This approach enables end-to-end SPICE netlist generation from circuit schematic images, tackling the persistent challenge of accurate netlist generation. We utilize Masala-CHAI to collect a corpus of 7,500 schematics that span varying complexities in 10 textbooks and benchmark various open source and proprietary LLMs. Models fine-tuned on Masala-CHAI when used in LLM-agentic frameworks such as AnalogCoder achieve a notable 46% improvement in Pass@1 scores. We open-source our dataset and code for community-driven development.

Perturbation probing generates task-specific causal hypotheses for FFN neurons in large language models using two forward passes per prompt and no backpropagation, followed by a one-time intervention sweep of about 150 passes amortized across all identified neurons. Across eight behavioral circuits, 13 models, and four architecture families, we identify two circuit structures that organize LLM behavior. Opposition circuits appear when RLHF suppresses a pre-training tendency. In safety refusal, about 50 neurons, or 0.014 percent of all neurons, control the refusal template; ablating them changes 80 percent of response formats on 520 AdvBench prompts while producing near-zero harmful compliance, 3 of 520 cases, all with disclaimers. Routing circuits appear for pre-training behaviors distributed through attention. For language selection, residual-stream direction injection switches English to Chinese output on 99.1 percent of 580 benchmark prompts in the 3 of 19 tested models that satisfy three observed conditions: bilingual training, FFN-to-skip signal ratio between 0.3 and 1.1, and linear representability. The same intervention fails on the other 16 models and on math, code, and factual circuits, defining the limits of directional steering. The FFN-to-skip signal ratio, computed from the same two forward passes, distinguishes the two structures and predicts the appropriate intervention. Circuit topology varies by architecture, from Qwen's concentrated FFN bottleneck to Gemma's normalization-shielded circuit. In Qwen3.5-2B, ablating 20 neurons eliminates multi-turn sycophantic capitulation, while amplifying 10 related neurons improves factual correction from 52 percent to 88 percent on 200 TruthfulQA prompts. These results show that perturbation probing offers mechanistic insight into RLHF-organized behavior and a practical toolkit for precision template-layer editing.

The electronic design automation of analog circuits has been a longstanding challenge in the integrated circuit field due to the huge design space and complex design trade-offs among circuit specifications. In the past decades, intensive research efforts have mostly been paid to automate the transistor sizing with a given circuit topology. By recognizing the graph nature of circuits, this paper presents a Circuit Graph Neural Network (CktGNN) that simultaneously automates the circuit topology generation and device sizing based on the encoder-dependent optimization subroutines. Particularly, CktGNN encodes circuit graphs using a two-level GNN framework (of nested GNN) where circuits are represented as combinations of subgraphs in a known subgraph basis. In this way, it significantly improves design efficiency by reducing the number of subgraphs to perform message passing. Nonetheless, another critical roadblock to advancing learning-assisted circuit design automation is a lack of public benchmarks to perform canonical assessment and reproducible research. To tackle the challenge, we introduce Open Circuit Benchmark (OCB), an open-sourced dataset that contains 10K distinct operational amplifiers with carefully-extracted circuit specifications. OCB is also equipped with communicative circuit generation and evaluation capabilities such that it can help to generalize CktGNN to design various analog circuits by producing corresponding datasets. Experiments on OCB show the extraordinary advantages of CktGNN through representation-based optimization frameworks over other recent powerful GNN baselines and human experts' manual designs. Our work paves the way toward a learning-based open-sourced design automation for analog circuits. Our source code is available at https://github.com/zehao-dong/CktGNN.

Recent work in mechanistic interpretability has shown that behaviors in language models can be successfully reverse-engineered through circuit analysis. A common criticism, however, is that each circuit is task-specific, and thus such analysis cannot contribute to understanding the models at a higher level. In this work, we present evidence that insights (both low-level findings about specific heads and higher-level findings about general algorithms) can indeed generalize across tasks. Specifically, we study the circuit discovered in Wang et al. (2022) for the Indirect Object Identification (IOI) task and 1.) show that it reproduces on a larger GPT2 model, and 2.) that it is mostly reused to solve a seemingly different task: Colored Objects (Ippolito & Callison-Burch, 2023). We provide evidence that the process underlying both tasks is functionally very similar, and contains about a 78% overlap in in-circuit attention heads. We further present a proof-of-concept intervention experiment, in which we adjust four attention heads in middle layers in order to 'repair' the Colored Objects circuit and make it behave like the IOI circuit. In doing so, we boost accuracy from 49.6% to 93.7% on the Colored Objects task and explain most sources of error. The intervention affects downstream attention heads in specific ways predicted by their interactions in the IOI circuit, indicating that this subcircuit behavior is invariant to the different task inputs. Overall, our results provide evidence that it may yet be possible to explain large language models' behavior in terms of a relatively small number of interpretable task-general algorithmic building blocks and computational components.

The automatic synthesis of analog circuits presents significant challenges. Most existing approaches formulate the problem as a single-objective optimization task, overlooking that design specifications for a given circuit type vary widely across applications. To address this, we introduce specification-conditioned analog circuit generation, a task that directly generates analog circuits based on target specifications. The motivation is to leverage existing well-designed circuits to improve automation in analog circuit design. Specifically, we propose CktGen, a simple yet effective variational autoencoder that maps discretized specifications and circuits into a joint latent space and reconstructs the circuit from that latent vector. Notably, as a single specification may correspond to multiple valid circuits, naively fusing specification information into the generative model does not capture these one-to-many relationships. To address this, we decouple the encoding of circuits and specifications and align their mapped latent space. Then, we employ contrastive training with a filter mask to maximize differences between encoded circuits and specifications. Furthermore, classifier guidance along with latent feature alignment promotes the clustering of circuits sharing the same specification, avoiding model collapse into trivial one-to-one mappings. By canonicalizing the latent space with respect to specifications, we can search for an optimal circuit that meets valid target specifications. We conduct comprehensive experiments on the open circuit benchmark and introduce metrics to evaluate cross-model consistency. Experimental results demonstrate that CktGen achieves substantial improvements over state-of-the-art methods.

Multi-modal Large Language Models (MLLMs) are gaining significant attention for their ability to process multi-modal data, providing enhanced contextual understanding of complex problems. MLLMs have demonstrated exceptional capabilities in tasks such as Visual Question Answering (VQA); however, they often struggle with fundamental engineering problems, and there is a scarcity of specialized datasets for training on topics like digital electronics. To address this gap, we propose a benchmark dataset called ElectroVizQA specifically designed to evaluate MLLMs' performance on digital electronic circuit problems commonly found in undergraduate curricula. This dataset, the first of its kind tailored for the VQA task in digital electronics, comprises approximately 626 visual questions, offering a comprehensive overview of digital electronics topics. This paper rigorously assesses the extent to which MLLMs can understand and solve digital electronic circuit questions, providing insights into their capabilities and limitations within this specialized domain. By introducing this benchmark dataset, we aim to motivate further research and development in the application of MLLMs to engineering education, ultimately bridging the performance gap and enhancing the efficacy of these models in technical fields.

Activation patching is a popular mechanistic interpretability technique, but has many subtleties regarding how it is applied and how one may interpret the results. We provide a summary of advice and best practices, based on our experience using this technique in practice. We include an overview of the different ways to apply activation patching and a discussion on how to interpret the results. We focus on what evidence patching experiments provide about circuits, and on the choice of metric and associated pitfalls.

We investigate Josephson arrays consisting of a dice-lattice network of superconducting weak links surrounding rhombic plaquettes of proximitized semiconductor. Josephson coupling of the weak links and electron density in the plaquettes are independently controlled by separate electrostatic gates. Applied magnetic flux results in an intricate pattern of switching currents associated with frustration, f. For depleted plaquettes, the switching current is nearly periodic in f, expected for a phase-only description, while occupied plaquettes yield a decreasing envelope of switching currents with increasing f. A model of flux dependence based on ballistic small-area junctions and diffusive large-area plaquettes yields excellent agreement with experiment.

This paper presents ``Stim", a fast simulator for quantum stabilizer circuits. The paper explains how Stim works and compares it to existing tools. With no foreknowledge, Stim can analyze a distance 100 surface code circuit (20 thousand qubits, 8 million gates, 1 million measurements) in 15 seconds and then begin sampling full circuit shots at a rate of 1 kHz. Stim uses a stabilizer tableau representation, similar to Aaronson and Gottesman's CHP simulator, but with three main improvements. First, Stim improves the asymptotic complexity of deterministic measurement from quadratic to linear by tracking the {\em inverse} of the circuit's stabilizer tableau. Second, Stim improves the constant factors of the algorithm by using a cache-friendly data layout and 256 bit wide SIMD instructions. Third, Stim only uses expensive stabilizer tableau simulation to create an initial reference sample. Further samples are collected in bulk by using that sample as a reference for batches of Pauli frames propagating through the circuit.

Analog circuit design relies heavily on reusing existing intellectual property (IP), yet searching across heterogeneous representations such as SPICE netlists, schematics, and functional descriptions remains challenging. Existing methods are largely limited to exact matching within a single modality, failing to capture cross-modal semantic relationships. To bridge this gap, we present AnalogRetriever, a unified tri-modal retrieval framework for analog circuit search. We first build a high-quality dataset on top of Masala-CHAI through a two-stage repair pipeline that raises the netlist compile rate from 22\% to 100\%. Built on this foundation, AnalogRetriever encodes schematics and descriptions with a vision-language model and netlists with a port-aware relational graph convolutional network, mapping all three modalities into a shared embedding space via curriculum contrastive learning. Experiments show that AnalogRetriever achieves an average Recall@1 of 75.2\% across all six cross-modal retrieval directions, significantly outperforming existing baselines. When integrated into the AnalogCoder agentic framework as a retrieval-augmented generation module, it consistently improves functional pass rates and enables previously unsolved tasks to be completed. Our code and dataset will be released.

The emergence of multimodal large language models (MLLMs) presents promising opportunities for automation and enhancement in Electronic Design Automation (EDA). However, comprehensively evaluating these models in circuit design remains challenging due to the narrow scope of existing benchmarks. To bridge this gap, we introduce MMCircuitEval, the first multimodal benchmark specifically designed to assess MLLM performance comprehensively across diverse EDA tasks. MMCircuitEval comprises 3614 meticulously curated question-answer (QA) pairs spanning digital and analog circuits across critical EDA stages - ranging from general knowledge and specifications to front-end and back-end design. Derived from textbooks, technical question banks, datasheets, and real-world documentation, each QA pair undergoes rigorous expert review for accuracy and relevance. Our benchmark uniquely categorizes questions by design stage, circuit type, tested abilities (knowledge, comprehension, reasoning, computation), and difficulty level, enabling detailed analysis of model capabilities and limitations. Extensive evaluations reveal significant performance gaps among existing LLMs, particularly in back-end design and complex computations, highlighting the critical need for targeted training datasets and modeling approaches. MMCircuitEval provides a foundational resource for advancing MLLMs in EDA, facilitating their integration into real-world circuit design workflows. Our benchmark is available at https://github.com/cure-lab/MMCircuitEval.

Mechanistic interpretability seeks to explain neural network behavior by decomposing model computations into interpretable features and circuits. While transcoder-based circuit tracing has recently enabled detailed causal analyses of large language models, multimodal diffusion transformers for image generation remain comparatively opaque. We still lack tools for understanding how semantic information propagates across denoising steps and how text and image representations interact within double-stream MM-DiT architectures. Existing methods provide only partial insight: attention maps expose a limited view of token interactions, while sparse autoencoders can discover interpretable features but do not directly reveal how these features are transformed and composed through nonlinear MLP layers. In this work, we extend transcoder-based circuit tracing to multimodal diffusion transformers. We train timestep-conditioned transcoders that faithfully approximate the input-output behavior of MLP sublayers in FLUX.1[schnell]. By replacing MLPs with transcoders and linearizing the remaining computation, we obtain exact feature-to-feature attribution and recover compact, interpretable circuits. Empirically, our transcoders match or slightly outperform sparse autoencoders on the sparsity-faithfulness tradeoff. The resulting circuits reveal mechanisms underlying attribute binding and cross-stream semantic propagation, and provide causal explanations for systematic generation errors. Moreover, circuit-guided interventions are substantially more precise and effective than standard SAE-based steering. Our results demonstrate that transcoder-based circuit analysis is feasible for state-of-the-art diffusion transformers and provides a powerful framework for understanding and controlling multimodal generative models. The code is available at https://github.com/Artalmaz31/DifFRACT

In this paper, we introduce an approach for detecting modifications in assembled printed circuit boards based on photographs taken without tight control over perspective and illumination conditions. One instance of this problem is the visual inspection of gas pumps PCBs, which can be modified by fraudsters wishing to deceive costumers or evade taxes. Given the uncontrolled environment and the huge number of possible modifications, we address the problem as a case of anomaly detection, proposing an approach that is directed towards the characteristics of that scenario, while being well-suited for other similar applications. The proposed approach employs a deep convolutional autoencoder trained to reconstruct images of an unmodified board, but which remains unable to do the same for images showing modifications. By comparing the input image with its reconstruction, it is possible to segment anomalies and modifications in a pixel-wise manner. Experiments performed on a dataset built to represent real-world situations (and which we will make publicly available) show that our approach outperforms other state-of-the-art approaches for anomaly segmentation in the considered scenario, while producing comparable results on the popular MVTec-AD dataset for a more general object anomaly detection task.

Printed circuit board (PCB) schematic design defines nearly all electronic hardware, but it remains manual and expertise-intensive. While generative AI has advanced digital and analog IC design, PCB schematic generation from natural-language intent is largely unexplored. This paper presents SchGen, the first large language model that generates editable PCB schematics from natural-language requests. The key challenge lies in the lack of an LLM-suited representation and a large-scale dataset. Current schematic formats are dominated by verbose, tool-specific syntax and geometry-heavy descriptions, making them difficult to generate reliably. We introduce a semantically grounded code representation that encodes schematic editing primitives with relative placement and pin-name-based wiring, transforming a geometry-driven generation problem into a semantics-driven matching task amenable to LLMs. We further construct a large-scale dataset of PCB schematics paired with user prompts via a human-agent collaborative pipeline that converts open-source hardware designs into our representation. Experiments show that SchGen significantly outperforms alternative representations and even larger general-purpose LLMs on wire connectivity accuracy and functional correctness. Our results highlight the critical role of representation design in enabling generative models for complex hardware design tasks.

Current multimodal large language models (MLLMs) struggle to understand circuit schematics due to their limited recognition capabilities. This could be attributed to the lack of high-quality schematic-netlist training data. Existing work such as AMSnet applies schematic parsing to generate netlists. However, these methods rely on hard-coded heuristics and are difficult to apply to complex or noisy schematics in this paper. We therefore propose a novel net detection mechanism based on segmentation with high robustness. The proposed method also recovers positional information, allowing digital reconstruction of schematics. We then expand AMSnet dataset with schematic images from various sources and create AMSnet 2.0. AMSnet 2.0 contains 2,686 circuits with schematic images, Spectre-formatted netlists, OpenAccess digital schematics, and positional information for circuit components and nets, whereas AMSnet only includes 792 circuits with SPICE netlists but no digital schematics.

In recent years, AI-assisted IC design methods have demonstrated great potential, but the availability of circuit design data is extremely limited, especially in the public domain. The lack of circuit data has become the primary bottleneck in developing AI-assisted IC design methods. In this work, we make the first attempt, SynCircuit, to generate new synthetic circuits with valid functionalities in the HDL format. SynCircuit automatically generates synthetic data using a framework with three innovative steps: 1) We propose a customized diffusion-based generative model to resolve the Directed Cyclic Graph (DCG) generation task, which has not been well explored in the AI community. 2) To ensure our circuit is valid, we enforce the circuit constraints by refining the initial graph generation outputs. 3) The Monte Carlo tree search (MCTS) method further optimizes the logic redundancy in the generated graph. Experimental results demonstrate that our proposed SynCircuit can generate more realistic synthetic circuits and enhance ML model performance in downstream circuit design tasks.

Unveiling feeder topologies from data is of paramount importance to advance situational awareness and proper utilization of smart resources in power distribution grids. This tutorial summarizes, contrasts, and establishes useful links between recent works on topology identification and detection schemes that have been proposed for power distribution grids. The primary focus is to highlight methods that overcome the limited availability of measurement devices in distribution grids, while enhancing topology estimates using conservation laws of power-flow physics and structural properties of feeders. Grid data from phasor measurement units or smart meters can be collected either passively in the traditional way, or actively, upon actuating grid resources and measuring the feeder's voltage response. Analytical claims on feeder identifiability and detectability are reviewed under disparate meter placement scenarios. Such topology learning claims can be attained exactly or approximately so via algorithmic solutions with various levels of computational complexity, ranging from least-squares fits to convex optimization problems, and from polynomial-time searches over graphs to mixed-integer programs. Although the emphasis is on radial single-phase feeders, extensions to meshed and/or multiphase circuits are sometimes possible and discussed. This tutorial aspires to provide researchers and engineers with knowledge of the current state-of-the-art in tractable distribution grid learning and insights into future directions of work.

Accurate, high-performance radio-frequency (RF) filter circuits are ubiquitous in radio-frequency communication and sensing systems for accepting and rejecting signals at desired frequencies. Conventional RF filter design process involves manual calculations of design parameters, followed by intuition-guided iterations to achieve the desired response for a set of filter specifications. This process is time-consuming due to time- and resource-intensive electromagnetic simulations using full-wave numerical PDE solvers. This process is also highly sensitive to domain expertise and requires many years of professional training. To address these bottlenecks, we propose an automatic RF filter circuit design tool using neural simulator and reinforcement learning. First, we train a neural simulator to replace the PDE electromagnetic simulator. The neural-network-based simulator reduces each of the simulation time from 4 minutes on average to less than 100 millisecond while maintaining a high precision. Such dramatic acceleration enable us to leverage deep reinforcement learning algorithm and train an amortized inference policy to perform automatic design in the imagined space from the neural simulator. The resulted automatic circuit-design agent achieves super-human design results. The automatic circuit-design agent also reduces the on-average design cycle from days to under a few seconds. Even more surprisingly, we demonstrate that the neural simulator can generalize to design spaces far from the training dataset and in a sense it has learned the underlying physics--Maxwell equations. We also demonstrate that the reinforcement learning has discovered many expert-like design intuitions. This work marks a step in using neural simulators and reinforcement learning in RF circuit design and the proposed method is generally applicable to many other design problems and domains in close affinity

In this paper, we propose AnalogSeeker, an effort toward an open-source foundation language model for analog circuit design, with the aim of integrating domain knowledge and giving design assistance. To overcome the scarcity of data in this field, we employ a corpus collection strategy based on the domain knowledge framework of analog circuits. High-quality, accessible textbooks across relevant subfields are systematically curated and cleaned into a textual domain corpus. To address the complexity of knowledge of analog circuits, we introduce a granular domain knowledge distillation method. Raw, unlabeled domain corpus is decomposed into typical, granular learning nodes, where a multi-agent framework distills implicit knowledge embedded in unstructured text into question-answer data pairs with detailed reasoning processes, yielding a fine-grained, learnable dataset for fine-tuning. To address the unexplored challenges in training analog circuit foundation models, we explore and share our training methods through both theoretical analysis and experimental validation. We finally establish a fine-tuning-centric training paradigm, customizing and implementing a neighborhood self-constrained supervised fine-tuning algorithm. This approach enhances training outcomes by constraining the perturbation magnitude between the model's output distributions before and after training. In practice, we train the Qwen2.5-32B-Instruct model to obtain AnalogSeeker, which achieves 85.04% accuracy on AMSBench-TQA, the analog circuit knowledge evaluation benchmark, with a 15.67% point improvement over the original model and is competitive with mainstream commercial models. Furthermore, AnalogSeeker also shows effectiveness in the downstream operational amplifier design task. AnalogSeeker is open-sourced at https://huggingface.co/analogllm/analogseeker for research use.

Automatic generation of device-level analog circuit topologies remains a fundamental challenge in analog design automation. Recent transformer-based approaches have shown promise, yet they often suffer from limited functional controllability, memorization of training data, and the generation of electrically invalid circuits. We propose AnalogToBi, a device-level analog circuit topology generation framework that addresses these limitations. AnalogToBi enables explicit functional control via a circuit type token and adopts a bipartite graph-based circuit representation that decouples positional ordering from functional semantics, encouraging structural reasoning over sequence memorization. In addition, grammar-guided decoding enforces electrical validity during generation, while apply device renaming-based data augmentation improves generalization by increasing sequence diversity without altering circuit functionality. Experimental results show that AnalogToBi achieves 97.8% validity and 92.1% novelty, resulting in 89.9% valid and novel circuits under conditional generation, without human expert involvement. We further present that generated circuits can be automatically translated into SPICE netlists, and SPICE simulations confirm that AnalogToBi discovers high-quality analog topologies that outperform prior methods. For code and supplementary materials, see https://github.com/Seungmin0825/AnalogToBi

The superconducting materials that make up an MKID have a significant effect on its performance. The T_c and normal state resistivity ρ_N of the film determine the penetration depth λ and therefore how much kinetic inductance it has. The ratio of kinetic inductance to total inductance (α), the volume of the inductor, and Q_m determines the magnitude of the response to incoming energy. The quasiparticle lifetime τ_qp is the characteristic time during which the MKID's surface impedance is modified by the incoming energy. Many materials have been explored for use in superconducting resonators and MKIDs, but that information is often not published or scattered around the literature. This chapter contains information and references on the work that has been done with thin film lithographed circuits for MKIDs over the last two decades. Note that measured material properties such as the internal loss quality factor Q_i and quasiparticle lifetime τ_qp vary significantly depending on how the MKID superconducting thin film is made and the system they are measured in, so it is best to interpret all stated values as typical but not definitive. Values are omitted in cases when there aren't enough measurements or there is too much disagreement in the literature to estimate a typical value. In order to be as complete as possible some unpublished results from the author's lab are included and can be identified by the lack of a reference. Unless noted all films are polycrystalline or amorphous.

Quantum circuits -- built from local unitary gates and local measurements -- are a new playground for quantum many-body physics and a tractable setting to explore universal collective phenomena far-from-equilibrium. These models have shed light on longstanding questions about thermalization and chaos, and on the underlying universal dynamics of quantum information and entanglement. In addition, such models generate new sets of questions and give rise to phenomena with no traditional analog, such as new dynamical phases in quantum systems that are monitored by an external observer. Quantum circuit dynamics is also topical in view of experimental progress in building digital quantum simulators that allow control of precisely these ingredients. Randomness in the circuit elements allows a high level of theoretical control, with a key theme being mappings between real-time quantum dynamics and effective classical lattice models or dynamical processes. Many of the universal phenomena that can be identified in this tractable setting apply to much wider classes of more structured many-body dynamics.

Mechanistic interpretability has made substantial progress in automatically localizing circuits, but explaining what localized components do remains labor-intensive and difficult to standardize. In this work, we study whether language model (LM) agents can assist with this explanation problem once a circuit has already been identified. We introduce AgenticInterpBench, a benchmark for circuit explanation built from 84 semi-synthetic transformer circuits with 163 component-level annotations. We propose HyVE (Hypothesize, Validate, Explain), an agentic explainer that analyzes each component through an iterative loop of observation, hypothesis generation, and causal validation, eventually producing a component-level explanation and a circuit-level task description. Across four LM backbones, HyVE recovers useful component- and task-level explanations, but no backbone is uniformly best. Our analysis shows that strong backbones usually form observation-grounded hypotheses, while failures more often arise later in the validation loop, through incomplete validation plans, code execution errors, or unresolved hypotheses. A case study on an arithmetic circuit in Llama-3-8B shows that the same formulation can extend beyond semi-synthetic benchmarks to naturally trained models. Overall, LM agents are promising circuit explainers, but reliable validation remains the key obstacle.

Circuit Satisfiability (CSAT) plays a pivotal role in Electronic Design Automation. The standard workflow for solving CSAT problems converts circuits into Conjunctive Normal Form (CNF) and employs generic SAT solvers powered by Conflict-Driven Clause Learning (CDCL). However, this process inherently discards rich structural and functional information, leading to suboptimal solver performance. To address this limitation, we introduce CASCAD, a novel circuit-aware SAT solving framework that directly leverages circuit-level conditional probabilities computed via Graph Neural Networks (GNNs). By explicitly modeling gate-level conditional probabilities, CASCAD dynamically guides two critical CDCL heuristics -- variable phase selection and clause managementto significantly enhance solver efficiency. Extensive evaluations on challenging real-world Logical Equivalence Checking (LEC) benchmarks demonstrate that CASCAD reduces solving times by up to 10x compared to state-of-the-art CNF-based approaches, achieving an additional 23.5% runtime reduction via our probability-guided clause filtering strategy. Our results underscore the importance of preserving circuit-level structural insights within SAT solvers, providing a robust foundation for future improvements in SAT-solving efficiency and EDA tool design.

Addressing the critical theme of recycling electronic waste (E-waste), this contribution is dedicated to developing advanced automated data processing pipelines as a basis for decision-making and process control. Aligning with the broader goals of the circular economy and the United Nations (UN) Sustainable Development Goals (SDG), our work leverages non-invasive analysis methods utilizing RGB and hyperspectral imaging data to provide both quantitative and qualitative insights into the E-waste stream composition for optimizing recycling efficiency. In this paper, we introduce 'PCB-Vision'; a pioneering RGB-hyperspectral printed circuit board (PCB) benchmark dataset, comprising 53 RGB images of high spatial resolution paired with their corresponding high spectral resolution hyperspectral data cubes in the visible and near-infrared (VNIR) range. Grounded in open science principles, our dataset provides a comprehensive resource for researchers through high-quality ground truths, focusing on three primary PCB components: integrated circuits (IC), capacitors, and connectors. We provide extensive statistical investigations on the proposed dataset together with the performance of several state-of-the-art (SOTA) models, including U-Net, Attention U-Net, Residual U-Net, LinkNet, and DeepLabv3+. By openly sharing this multi-scene benchmark dataset along with the baseline codes, we hope to foster transparent, traceable, and comparable developments of advanced data processing across various scientific communities, including, but not limited to, computer vision and remote sensing. Emphasizing our commitment to supporting a collaborative and inclusive scientific community, all materials, including code, data, ground truth, and masks, will be accessible at https://github.com/hifexplo/PCBVision.

We review thirteen generative systems and five supporting datasets for quantum circuit and quantum code generation, identified through a structured scoping review of Hugging Face, arXiv, and provenance tracing (January-February 2026). We organize the field along two axes: artifact type (Qiskit code, OpenQASM programs, circuit graphs); crossed with training regime (supervised fine-tuning, verifier-in-the-loop RL, diffusion/graph generation, agentic optimization); and systematically apply a three-layer evaluation framework covering syntactic validity, semantic correctness, and hardware executability. The central finding is that while all reviewed systems address syntax and most address semantics to some degree, none reports end-to-end evaluation on quantum hardware (Layer 3b), leaving a significant gap between generated circuits and practical deployment. Scope note: quantum code refers throughout to quantum program artifacts (QASM, Qiskit); we do not cover generation of quantum error-correcting codes (QEC).

In electronic design, engineers often manually search through extensive documents to retrieve component parameters required for constructing SPICE models, a process that is both labor-intensive and time-consuming. To address this challenge, we present an automated framework called D2S-FLOW that leverages large language models (LLMs) to extract electrical parameters from datasheets and generate SPICE models with high precision and efficiency, significantly reducing the need for manual intervention. Unlike traditional RAG systems, D2S-FLOW employs a workflow to enhance precision in handling unstructured documents and inconsistent naming conventions through three innovative mechanisms: Attention-Guided Document Focusing (AGDF), Hierarchical Document-Enhanced Retrieval (HDER), and Heterogeneous Named Entity Normalization (HNEN). AGDF narrows retrieval to user-selected documents, HDER utilizes document structure for precise parameter localization, and HNEN standardizes terminology via semantic inference. Experimental results demonstrate that the framework achieves an Exact Match (EM) of 0.86, an F1 score of 0.92, and an Exact Correctness (EC) of 0.96, outperforming the strongest baseline by 19.4%, 5.7%, and 13.1%, respectively. Additionally, it reduces API token consumption by 38% and minimizes the irrelevant information ratio to 4%, showcasing substantial improvements in resource efficiency. This research provides an effective automated solution for circuit design.

Mechanistic interpretability identifies internal circuits responsible for model behaviors, yet translating these findings into human-understandable explanations remains an open problem. We present a pipeline that bridges circuit-level analysis and natural language explanations by (i) identifying causally important attention heads via activation patching, (ii) generating explanations using both template-based and LLM-based methods, and (iii) evaluating faithfulness using ERASER-style metrics adapted for circuit-level attribution. We evaluate on the Indirect Object Identification (IOI) task in GPT-2 Small (124M parameters), identifying six attention heads accounting for 61.4% of the logit difference. Our circuit-based explanations achieve 100% sufficiency but only 22% comprehensiveness, revealing distributed backup mechanisms. LLM-generated explanations outperform template baselines by 64% on quality metrics. We find no correlation (r = 0.009) between model confidence and explanation faithfulness, and identify three failure categories explaining when explanations diverge from mechanisms.

Pre-routing timing prediction has been recently studied for evaluating the quality of a candidate cell placement in chip design. It involves directly estimating the timing metrics for both pin-level (slack, slew) and edge-level (net delay, cell delay), without time-consuming routing. However, it often suffers from signal decay and error accumulation due to the long timing paths in large-scale industrial circuits. To address these challenges, we propose a two-stage approach. First, we propose global circuit training to pre-train a graph auto-encoder that learns the global graph embedding from circuit netlist. Second, we use a novel node updating scheme for message passing on GCN, following the topological sorting sequence of the learned graph embedding and circuit graph. This scheme residually models the local time delay between two adjacent pins in the updating sequence, and extracts the lookup table information inside each cell via a new attention mechanism. To handle large-scale circuits efficiently, we introduce an order preserving partition scheme that reduces memory consumption while maintaining the topological dependencies. Experiments on 21 real world circuits achieve a new SOTA R2 of 0.93 for slack prediction, which is significantly surpasses 0.59 by previous SOTA method. Code will be available at: https://github.com/Thinklab-SJTU/EDA-AI.

Gradient descent is the method of choice for training large artificial intelligence systems. As these systems become larger, a better understanding of the mechanisms behind gradient training would allow us to alleviate compute costs and help steer these systems away from harmful behaviors. To that end, we suggest utilizing the circuit perspective brought forward by mechanistic interpretability. After laying out our intuition, we illustrate how it enables us to design a curriculum for efficient learning in a controlled setting. The code is available at https://github.com/facebookresearch/pal.

Battery health diagnostics today rely overwhelmingly on electrochemical signals measured at the cell terminals. A parallel literature has shown that magnetic sensing can resolve information that terminal-only measurements miss, but method development is limited by the absence, to the best of our knowledge, of public battery magnetic-measurement datasets paired with degradation labels. We release MagBridge-Battery v1.0, a synthetic dataset of 6,760 magnetic-field signatures that bridges real magnetic morphology from the Mohammadi-Jerschow Open Science Framework (OSF) archive with state-of-health (SOH) labels from the PulseBat dataset. The release contains 5,600 PulseBat-conditioned grounded samples, 600 synthetic sensor-anomaly samples derived from clean parents, and 560 low-voltage Regime-B extrapolation samples. A cell-disjoint, parent-child-leakage-free primary benchmark split is verified to contain zero overlapping cells, zero cross-split parent-child pairs, and zero sample-ID overlap. We define three primary benchmark tasks: SOH regression, second-life classification, and anomaly detection, plus an auxiliary anomaly-subtype classification task. A controlled label-shuffle ablation collapses SOH regression from R^2 approximately 0.77 to approximately 0, confirming that the bridge encodes input SOH non-trivially rather than producing label-aligned artifacts. The dataset is released on Zenodo under CC-BY-4.0, and the bridge code and benchmark suite are released under Apache-2.0. This work provides a public benchmark for magnetic-sensing battery diagnostics while paired magnetic-electrochemical measurements remain scarce.

Quantum hardware based on circuit quantum electrodynamics makes extensive use of airbridges to suppress unwanted modes of wave propagation in coplanar-waveguide transmission lines. Airbridges also provide an interconnect enabling transmission lines to cross. Traditional airbridge fabrication produces a curved profile by reflowing resist at elevated temperature prior to metallization. The elevated temperature can affect the coupling energy and even yield of pre-fabricated Josephson elements of superconducting qubits, tuneable couplers and resonators. We employ grayscale lithography in place of reflow to reduce the peak airbridge processing temperature from 200 to 150^circC, showing a substantial yield increase of transmon qubits with Josephson elements realized using Al-contacted InAs nanowires.

Accurate spatial prediction of power integrity issues, such as IR drop, is critical for reliable VLSI design. However, traditional simulation-based solvers are computationally expensive and difficult to scale. We address this challenge by reformulating IR drop estimation as a pixel-wise regression task on heterogeneous multi-channel physical maps derived from circuit layouts. Prior learning-based methods treat all input layers (e.g., metal, via, and current maps) equally, ignoring their varying importance to prediction accuracy. To tackle this, we propose a novel Weakness-Aware Channel Attention (WACA) mechanism, which recursively enhances weak feature channels while suppressing over-dominant ones through a two-stage gating strategy. Integrated into a ConvNeXtV2-based attention U-Net, our approach enables adaptive and balanced feature representation. On the public ICCAD-2023 benchmark, our method outperforms the ICCAD-2023 contest winner by reducing mean absolute error by 61.1% and improving F1-score by 71.0%. These results demonstrate that channel-wise heterogeneity is a key inductive bias in physical layout analysis for VLSI.

Fault attacks are active, physical attacks that an adversary can leverage to alter the control-flow of embedded devices to gain access to sensitive information or bypass protection mechanisms. Due to the severity of these attacks, manufacturers deploy hardware-based fault defenses into security-critical systems, such as secure elements. The development of these countermeasures is a challenging task due to the complex interplay of circuit components and because contemporary design automation tools tend to optimize inserted structures away, thereby defeating their purpose. Hence, it is critical that such countermeasures are rigorously verified post-synthesis. As classical functional verification techniques fall short of assessing the effectiveness of countermeasures, developers have to resort to methods capable of injecting faults in a simulation testbench or into a physical chip. However, developing test sequences to inject faults in simulation is an error-prone task and performing fault attacks on a chip requires specialized equipment and is incredibly time-consuming. To that end, this paper introduces SYNFI, a formal pre-silicon fault verification framework that operates on synthesized netlists. SYNFI can be used to analyze the general effect of faults on the input-output relationship in a circuit and its fault countermeasures, and thus enables hardware designers to assess and verify the effectiveness of embedded countermeasures in a systematic and semi-automatic way. To demonstrate that SYNFI is capable of handling unmodified, industry-grade netlists synthesized with commercial and open tools, we analyze OpenTitan, the first open-source secure element. In our analysis, we identified critical security weaknesses in the unprotected AES block, developed targeted countermeasures, reassessed their security, and contributed these countermeasures back to the OpenTitan repository.

Computing is conventionally implemented by hardware engineered for information processing. Here we investigate infrastructure-native computing: the use of a physical system built for another primary function as a fixed computational operator. In time-domain simulations of an IEEE 14-bus electrical network, Kirchhoff's current law and Ohm's law relate voltage-reference perturbations applied at distributed controllable nodes interfaced by power electronics converters to current responses through a topology-dependent transformation. A trained digital encoder and decoder exploit this transformation for image classification, reaching 91.5% accuracy on MNIST and 82.25% on Fashion-MNIST. The modeled operator is represented by 933 surrogate parameters, compared with 12,340 task-trained parameters for an accuracy-matched fully connected core transformation. Current superposition further supports concurrent spatial sharing of the operator and sequential temporal reuse, with per-stream accuracies above 85% and 93%, respectively, in surrogate-model evaluations. Evaluations on CIFAR-10 and repeated 10-class tasks sampled from a Butterflies-and-Moths dataset show that the incremental utility of the physical operator depends on the representation supplied by upstream digital feature extraction. These results provide a simulation-based proof of concept for infrastructure-native computing with electrical networks and identify topology, accessible control channels, and input representation as determinants of its computational utility.

Mechanistic interpretability methods aim to identify the algorithm a neural network implements, but it is difficult to validate such methods when the true algorithm is unknown. This work presents InterpBench, a collection of semi-synthetic yet realistic transformers with known circuits for evaluating these techniques. We train these neural networks using a stricter version of Interchange Intervention Training (IIT) which we call Strict IIT (SIIT). Like the original, SIIT trains neural networks by aligning their internal computation with a desired high-level causal model, but it also prevents non-circuit nodes from affecting the model's output. We evaluate SIIT on sparse transformers produced by the Tracr tool and find that SIIT models maintain Tracr's original circuit while being more realistic. SIIT can also train transformers with larger circuits, like Indirect Object Identification (IOI). Finally, we use our benchmark to evaluate existing circuit discovery techniques.

Analog mixed-signal circuit sizing involves complex trade-offs within high-dimensional design spaces. Existing automatic analog circuit sizing approaches rely solely on netlists, ignoring the circuit schematic, which hinders the cognitive link between the schematic and its performance. Furthermore, the black-box nature of machine learning methods and hallucination risks in large language models fail to provide the necessary ground-truth explainability required for industrial sign-off. To address these challenges, we propose a Vision Language Model-optimized collaborative agent design workflow (VLM-CAD), which analyzes circuits, optimizes DC operating points, performs inference-based sizing, and executes external sizing optimization. We integrate Image2Net to annotate circuit schematics and generate a structured JSON description for precise interpretation by Vision Language Models. Furthermore, we propose an Explainable Trust Region Bayesian Optimization method (ExTuRBO) that employs collaborative warm-start from agent-generated seeds and offers dual-granularity sensitivity analysis for external sizing optimization, supporting a comprehensive final design report. Experiment results on amplifier sizing tasks using 180nm, 90nm, and 45nm Predictive Technology Models demonstrate that VLM-CAD effectively balances power and performance while maintaining physics-based explainability. VLM-CAD meets all specification requirements while maintaining low power consumption in optimizing an amplifier with a complementary input and a class-AB output stage, with a total runtime under 66 minutes across all experiments on two amplifiers.

Post-route power recovery changes cell choices under tightly coupled timing, electrical and physical constraints, and the value of each change depends on what it costs to repair its side effects. We propose an AI-driven framework in which a learned model drives both phases of the optimization: it ranks the powerrecovery edits to try and the repair actions that follow, while deterministic electronic design automation (EDA) analyses govern every acceptance. The framework records baseline constraint margins, identifies the damage a recovery transaction introduces in each analysis view, holds pre-existing violations at their baseline rather than working them inside the power step, and caps repair spending at a fraction of the measured saving. An ensemble of gradient-boosted models predicts power change, normalized damage reduction and constraint-regression risk from action and timing-context features available before each trial; calibrated, conservative estimates feed separate acquisition scores for recovery and repair, with a deterministic fallback when the model is uncertain. Recovery and repair remain speculative until physical implementation and fresh analysis establish baseline preservation and positive net saving. We specify the contract, the learned policy, the transactional flow and a pre-registered public evaluation protocol on open designs. Evidence from a companion study on public designs supports the contract; the learned policy is proposed, and no trained-model results or proprietary design measurements are reported.

Conventional semiconductor-based integrated circuits are gradually approaching fundamental scaling limits. Many prospective solutions have recently emerged to supplement or replace both the technology on which basic devices are built and the architecture of data processing. Neuromorphic circuits are a promising approach to computing where techniques used by the brain to achieve high efficiency are exploited. Many existing neuromorphic circuits rely on unconventional and useful properties of novel technologies to better mimic the operation of the brain. One such technology is single flux quantum (SFQ) logic -- a cryogenic superconductive technology in which the data are represented by quanta of magnetic flux (fluxons) produced and processed by Josephson junctions embedded within inductive loops. The movement of a fluxon within a circuit produces a quantized voltage pulse (SFQ pulse), resembling a neuronal spiking event. These circuits routinely operate at clock frequencies of tens to hundreds of gigahertz, making SFQ a natural technology for processing high frequency pulse trains. Prior proposals for SFQ neural networks often require energy-expensive fluxon conversions, involve heterogeneous technologies, or exclusively focus on device level behavior. In this paper, a design methodology for deep single flux quantum neuromorphic networks is presented. Synaptic and neuronal circuits based on SFQ technology are presented and characterized. Based on these primitives, a deep neuromorphic XOR network is evaluated as a case study, both at the architectural and circuit levels, achieving wide classification margins. The proposed methodology does not employ unconventional superconductive devices or semiconductor transistors. The resulting networks are tunable by an external current, making this proposed system an effective approach for scalable cryogenic neuromorphic computing.

Probabilistic circuits (PCs) are models that allow exact and tractable probabilistic inference. In contrast to neural networks, they are often assumed to be well-calibrated and robust to out-of-distribution (OOD) data. In this paper, we show that PCs are in fact not robust to OOD data, i.e., they don't know what they don't know. We then show how this challenge can be overcome by model uncertainty quantification. To this end, we propose tractable dropout inference (TDI), an inference procedure to estimate uncertainty by deriving an analytical solution to Monte Carlo dropout (MCD) through variance propagation. Unlike MCD in neural networks, which comes at the cost of multiple network evaluations, TDI provides tractable sampling-free uncertainty estimates in a single forward pass. TDI improves the robustness of PCs to distribution shift and OOD data, demonstrated through a series of experiments evaluating the classification confidence and uncertainty estimates on real-world data.

Electrical circuit diagram QA tasks require complex mathematical reasoning, which remains challenging for multimodal LLMs. We present SPARC, a multi-agent system that answers questions over circuit diagrams by grounding reasoning in executable physics-based simulations. SPARC uses LLM agents to synthesize, execute, and analyze simulation programs, improving accuracy and reliability by design. It achieves 83% accuracy, with up to a 58% absolute improvement over baselines, while enabling systematic error diagnosis.

Quantum algorithms, represented as quantum circuits, can be used as benchmarks for assessing the performance of quantum systems. Existing datasets, widely utilized in the field, suffer from limitations in size and versatility, leading researchers to employ randomly generated circuits. Random circuits are, however, not representative benchmarks as they lack the inherent properties of real quantum algorithms for which the quantum systems are manufactured. This shortage of `useful' quantum benchmarks poses a challenge to advancing the development and comparison of quantum compilers and hardware. This research aims to enhance the existing quantum circuit datasets by generating what we refer to as `realistic-looking' circuits by employing the Transformer machine learning architecture. For this purpose, we introduce KetGPT, a tool that generates synthetic circuits in OpenQASM language, whose structure is based on quantum circuits derived from existing quantum algorithms and follows the typical patterns of human-written algorithm-based code (e.g., order of gates and qubits). Our three-fold verification process, involving manual inspection and Qiskit framework execution, transformer-based classification, and structural analysis, demonstrates the efficacy of KetGPT in producing large amounts of additional circuits that closely align with algorithm-based structures. Beyond benchmarking, we envision KetGPT contributing substantially to AI-driven quantum compilers and systems.

Printed Circuit Boards are the foundation for the functioning of any electronic device, and therefore are an essential component for various industries such as automobile, communication, computation, etc. However, one of the challenges faced by the PCB manufacturers in the process of manufacturing of the PCBs is the faulty placement of its components including missing components. In the present scenario the infrastructure required to ensure adequate quality of the PCB requires a lot of time and effort. The authors present a novel solution for detecting missing components and classifying them in a resourceful manner. The presented algorithm focuses on pixel theory and object detection, which has been used in combination to optimize the results from the given dataset.

Understanding the structure and function of circuits is crucial for electronic design automation (EDA). Circuits can be formulated as And-Inverter graphs (AIGs), enabling efficient implementation of representation learning through graph neural networks (GNNs). Masked modeling paradigms have been proven effective in graph representation learning. However, masking augmentation to original circuits will destroy their logical equivalence, which is unsuitable for circuit representation learning. Moreover, existing masked modeling paradigms often prioritize structural information at the expense of abstract information such as circuit function. To address these limitations, we introduce MGVGA, a novel constrained masked modeling paradigm incorporating masked gate modeling (MGM) and Verilog-AIG alignment (VGA). Specifically, MGM preserves logical equivalence by masking gates in the latent space rather than in the original circuits, subsequently reconstructing the attributes of these masked gates. Meanwhile, large language models (LLMs) have demonstrated an excellent understanding of the Verilog code functionality. Building upon this capability, VGA performs masking operations on original circuits and reconstructs masked gates under the constraints of equivalent Verilog codes, enabling GNNs to learn circuit functions from LLMs. We evaluate MGVGA on various logic synthesis tasks for EDA and show the superior performance of MGVGA compared to previous state-of-the-art methods. Our code is available at https://github.com/wuhy68/MGVGA.

Chip design relies heavily on generating Boolean circuits, such as AND-Inverter Graphs (AIGs), from functional descriptions like truth tables. While recent advances in deep learning have aimed to accelerate circuit design, these efforts have mostly focused on tasks other than synthesis, and traditional heuristic methods have plateaued. In this paper, we introduce ShortCircuit, a novel transformer-based architecture that leverages the structural properties of AIGs and performs efficient space exploration. Contrary to prior approaches attempting end-to-end generation of logic circuits using deep networks, ShortCircuit employs a two-phase process combining supervised with reinforcement learning to enhance generalization to unseen truth tables. We also propose an AlphaZero variant to handle the double exponentially large state space and the sparsity of the rewards, enabling the discovery of near-optimal designs. To evaluate the generative performance of our trained model , we extract 500 truth tables from a benchmark set of 20 real-world circuits. ShortCircuit successfully generates AIGs for 84.6% of the 8-input test truth tables, and outperforms the state-of-the-art logic synthesis tool, ABC, by 14.61% in terms of circuits size.

The quantity that defines the behavior of a dynamic range compressor is the time-varying gain applied to the signal as a function of the input level. However, models of these devices are typically evaluated using proxy metrics because isolating the gain reduction signal from the audio input-output data included in existing datasets creates an ill-conditioned inverse problem. It is unclear how accurately these metrics describe the behavior the model is tasked with emulating, particularly as waveform-based metrics can be influenced by secondary effects introduced by analog processing and capture, even when those effects are inaudible. We investigate a method of evaluation in which the gain-reduction signal produced by a model is measured directly against a gain-reduction control voltage signal produced by the hardware. To evaluate the efficacy of this metric as a learning objective, a gray-box model is trained using loss computed directly over the gain control signals alongside two models trained using common proxy losses. The models trained using proxy losses did not achieve parity with models trained directly on the gain control signal when evaluated with respect to the underlying control trajectory, and the waveform-domain metrics assigned similar errors to models that were clearly separated by the direct metric. To facilitate further exploration of this method of evaluation, we present a Solid State Logic bus compressor dataset that includes the gain control voltage signal captured alongside the audio output.

The adoption of machine learning-based techniques for analog integrated circuit layout, unlike its digital counterpart, has been limited by the stringent requirements imposed by electric and problem-specific constraints, along with the interdependence of floorplanning and routing steps. In this work, we address a prevalent concern among layout engineers regarding the need for readily available routing-aware floorplanning solutions. To this extent, we develop an automatic floorplanning engine based on reinforcement learning and relational graph convolutional neural network specifically tailored to condition the floorplan generation towards more routable outcomes. A combination of increased grid resolution and precise pin information integration, along with a dynamic routing resource estimation technique, allows balancing routing and area efficiency, eventually meeting industrial standards. When analyzing the place and route effectiveness in a simulated environment, the proposed approach achieves a 13.8% reduction in dead space, a 40.6% reduction in wirelength and a 73.4% increase in routing success when compared to past learning-based state-of-the-art techniques.

Large language models (LLMs) have transformed code generation, yet their application in hardware design produces gate counts 38\%--1075\% higher than human designs. We present CircuitMind, a multi-agent framework that achieves human-competitive efficiency through three key innovations: syntax locking (constraining generation to basic logic gates), retrieval-augmented generation (enabling knowledge-driven design), and dual-reward optimization (balancing correctness with efficiency). To evaluate our approach, we introduce TC-Bench, the first gate-level benchmark harnessing collective intelligence from the TuringComplete ecosystem -- a competitive circuit design platform with hundreds of thousands of players. Experiments show CircuitMind enables 55.6\% of model implementations to match or exceed top-tier human experts in composite efficiency metrics. Most remarkably, our framework elevates the 14B Phi-4 model to outperform both GPT-4o mini and Gemini 2.0 Flash, achieving efficiency comparable to the top 25\% of human experts without requiring specialized training. These innovations establish a new paradigm for hardware optimization where collaborative AI systems leverage collective human expertise to achieve optimal circuit designs. Our model, data, and code are open-source at https://github.com/BUAA-CLab/CircuitMind.

Recent studies on large language models (LLMs) and large multimodal models (LMMs) have demonstrated promising skills in various domains including science and mathematics. However, their capability in more challenging and real-world related scenarios like engineering has not been systematically studied. To bridge this gap, we propose EEE-Bench, a multimodal benchmark aimed at assessing LMMs' capabilities in solving practical engineering tasks, using electrical and electronics engineering (EEE) as the testbed. Our benchmark consists of 2860 carefully curated problems spanning 10 essential subdomains such as analog circuits, control systems, etc. Compared to benchmarks in other domains, engineering problems are intrinsically 1) more visually complex and versatile and 2) less deterministic in solutions. Successful solutions to these problems often demand more-than-usual rigorous integration of visual and textual information as models need to understand intricate images like abstract circuits and system diagrams while taking professional instructions, making them excellent candidates for LMM evaluations. Alongside EEE-Bench, we provide extensive quantitative evaluations and fine-grained analysis of 17 widely-used open and closed-sourced LLMs and LMMs. Our results demonstrate notable deficiencies of current foundation models in EEE, with an average performance ranging from 19.48% to 46.78%. Finally, we reveal and explore a critical shortcoming in LMMs which we term laziness: the tendency to take shortcuts by relying on the text while overlooking the visual context when reasoning for technical image problems. In summary, we believe EEE-Bench not only reveals some noteworthy limitations of LMMs but also provides a valuable resource for advancing research on their application in practical engineering tasks, driving future improvements in their capability to handle complex, real-world scenarios.

We implement and benchmark on IBM Quantum hardware the circuit family proposed by Violaris for estimating operational inter-branch communication witnesses, defined as correlations in classical measurement records produced by compiled Wigner's-friend-style circuits. We realize a five-qubit instance of the protocol as an inter-register message-transfer pattern within a single circuit, rather than physical signaling, and evaluate its behavior under realistic device noise and compilation constraints. The circuit encodes branch-conditioned evolution of an observer subsystem whose dynamics depend on a control qubit, followed by a controlled transfer operation that probes correlations between conditional measurement contexts. Executing on the ibm_fez backend with 20000 shots, we observe population-based visibility of 0.877, coherence witnesses of 0.840 and -0.811 along orthogonal axes, and a phase-sensitive magnitude of approximately 1.17. While the visibility metric is insensitive to some classes of dephasing, the coherence witnesses provide complementary sensitivity to off-diagonal noise. This work does not test or discriminate among interpretations of quantum mechanics. Instead, it provides a reproducible operational constraint pipeline for evaluating detectability of non-ideal channels relative to calibrated device noise.

Machine learning has shown great promise in addressing several critical hardware security problems. In particular, researchers have developed novel graph neural network (GNN)-based techniques for detecting intellectual property (IP) piracy, detecting hardware Trojans (HTs), and reverse engineering circuits, to name a few. These techniques have demonstrated outstanding accuracy and have received much attention in the community. However, since these techniques are used for security applications, it is imperative to evaluate them thoroughly and ensure they are robust and do not compromise the security of integrated circuits. In this work, we propose AttackGNN, the first red-team attack on GNN-based techniques in hardware security. To this end, we devise a novel reinforcement learning (RL) agent that generates adversarial examples, i.e., circuits, against the GNN-based techniques. We overcome three challenges related to effectiveness, scalability, and generality to devise a potent RL agent. We target five GNN-based techniques for four crucial classes of problems in hardware security: IP piracy, detecting/localizing HTs, reverse engineering, and hardware obfuscation. Through our approach, we craft circuits that fool all GNNs considered in this work. For instance, to evade IP piracy detection, we generate adversarial pirated circuits that fool the GNN-based defense into classifying our crafted circuits as not pirated. For attacking HT localization GNN, our attack generates HT-infested circuits that fool the defense on all tested circuits. We obtain a similar 100% success rate against GNNs for all classes of problems.

This paper explores the potential of cryogenic semiconductor computing and superconductor electronics as promising alternatives to traditional semiconductor devices. As semiconductor devices face challenges such as increased leakage currents and reduced performance at higher temperatures, these novel technologies offer high performance and low power computation. Conventional semiconductor electronics operating at cryogenic temperatures (below -150{\deg}C or 123.15 K) can benefit from reduced leakage currents and improved electron mobility. On the other hand, superconductor electronics, operating below 10 K, allow electrons to flow without resistance, offering the potential for ultra-low-power, high-speed computation. This study presents a comprehensive performance modeling and analysis of these technologies and provides insights into their potential benefits and limitations. We implement models of in-order and out-of-order cores operating at high clock frequencies associated with superconductor electronics and cryogenic semiconductor computing in gem5. We evaluate the performance of these components using workloads representative of real-world applications like NPB, SPEC CPU2006, and GAPBS. Our results show the potential speedups achievable by these components and the limitations posed by cache bandwidth. This work provides valuable insights into the performance implications and design trade-offs associated with cryogenic and superconductor technologies, laying the foundation for future research in this field using gem5.

The remarkable capabilities of modern large reasoning models are largely unlocked through post-training techniques such as supervised fine-tuning and reinforcement learning. However, the architectural mechanisms behind such improvements remain largely opaque. In this work, we use circuit analysis to demonstrate that post-training for complex reasoning sparks the emergence of novel, functionally specialized attention heads. These heads collectively support structured reasoning and computation. Our comparative analysis across Qwen families and DeepSeek-distilled model reveals that these emergent heads evolve differently under different training regimes. Distillation and SFT foster a cumulative addition of stable reasoning heads. In contrast, group relative policy optimization operates in a dynamic search mode: relatively few attention heads are iteratively activated, evaluated, and pruned, with their survival closely tracking fluctuations in the task reward signal. Furthermore, we find that controllable think on/off models do not possess dedicated thinking heads. Instead, turning off explicit reasoning triggers a broader-but less efficient-set of compensatory heads. Through ablation and qualitative analyses, we connect these circuit-level dynamics to a crucial performance trade-off: strengthened heads enable sophisticated problem-solving strategies for difficult problems but can also introduce over-thinking failure modes, such as calculation errors or logical loops on simpler tasks. These findings connect circuit-level dynamics to macro-level performance, identifying an inherent tension where complex reasoning comes at the cost of elementary computations. More broadly, our work points to future directions for training policy design, emphasizing the need to balance the development of effective reasoning strategies with the assurance of reliable, flawless execution.

Modern deployments require LLMs to enforce safety policies at scale, yet many controls rely on inference-time interventions that add recurring compute cost and serving complexity. Activation steering is widely used, but it requires runtime hooks and scales cost with the number of generations; conditional variants improve selectivity by gating when steering is applied but still retain an inference-time control path. We ask whether selective refusal can be moved entirely offline: can a mechanistic understanding of category-specific refusal be distilled into a circuit-restricted weight update that deploys as a standard checkpoint? We propose C-Δθ: Circuit Restricted Weight Arithmetic, which (i) localizes refusal-causal computation as a sparse circuit using EAP-IG and (ii) computes a constrained weight update ΔθC supported only on that circuit (typically <5% of parameters). Applying ΔθC yields a drop-in edited checkpoint with no inference-time hooks, shifting cost from per-request intervention to a one-time offline update. We evaluate category-targeted selectivity and capability retention on refusal and utility benchmarks.

This paper introduces the sparse modular addition task and examines how transformers learn it. We focus on transformers with embeddings in R^2 and introduce a visual sandbox that provides comprehensive visualizations of each layer throughout the training process. We reveal a type of circuit, called "clustering heads," which learns the problem's invariants. We analyze the training dynamics of these circuits, highlighting two-stage learning, loss spikes due to high curvature or normalization layers, and the effects of initialization and curriculum learning.

Mechanistic interpretability seeks to reverse-engineer neural network computations into human-understandable algorithms, yet extracting sparse computational circuits from billion-parameter language models remains challenging due to exponential search complexity and pervasive polysemanticity. The proposed Hierarchical Attribution Graph Decomposition (HAGD) framework reduces circuit discovery complexity from O(2^n) exhaustive enumeration to O(n^2 log n) through multi-resolution abstraction hierarchies and differentiable circuit search. The methodology integrates cross-layer transcoders for monosemantic feature extraction, graph neural network meta-learning for topology prediction, and causal intervention protocols for validation. Empirical evaluation spans GPT-2 variants, Llama-7B through Llama-70B, and Pythia suite models across algorithmic tasks and natural language benchmarks. On modular arithmetic tasks, the framework achieves up to 91% behavioral preservation (pm2.3\% across runs) while maintaining interpretable subgraph sizes. Cross-architecture transfer experiments suggest that discovered circuits exhibit moderate structural similarity (averaging 67%) across model families, indicating potential shared computational patterns. These results provide preliminary foundations for interpretability at larger model scales while identifying significant limitations in current attribution methodologies that require future advances.

To coupe with the difficulties in the process of inspection and classification of defects in Printed Circuit Board (PCB), other researchers have proposed many methods. However, few of them published their dataset before, which hindered the introduction and comparison of new methods. In this paper, we published a synthesized PCB dataset containing 1386 images with 6 kinds of defects for the use of detection, classification and registration tasks. Besides, we proposed a reference based method to inspect and trained an end-to-end convolutional neural network to classify the defects. Unlike conventional approaches that require pixel-by-pixel processing, our method firstly locate the defects and then classify them by neural networks, which shows superior performance on our dataset.

Large Language Models (LLMs) have become extremely potent instruments with exceptional capacities for comprehending and producing human-like text in a wide range of applications. However, the increasing size and complexity of LLMs present significant challenges in both training and deployment, leading to substantial computational and storage costs as well as heightened energy consumption. In this paper, we provide a review of recent advancements and research directions aimed at addressing these challenges and enhancing the efficiency of LLM-based systems. We begin by discussing algorithm-level acceleration techniques focused on optimizing LLM inference speed and resource utilization. We also explore LLM-hardware co-design strategies with a vision to improve system efficiency by tailoring hardware architectures to LLM requirements. Further, we delve into LLM-to-accelerator compilation approaches, which involve customizing hardware accelerators for efficient LLM deployment. Finally, as a case study to leverage LLMs for assisting circuit design, we examine LLM-aided design methodologies for an important task: High-Level Synthesis (HLS) functional verification, by creating a new dataset that contains a large number of buggy and bug-free codes, which can be essential for training LLMs to specialize on HLS verification and debugging. For each aspect mentioned above, we begin with a detailed background study, followed by the presentation of several novel solutions proposed to overcome specific challenges. We then outline future research directions to drive further advancements. Through these efforts, we aim to pave the way for more efficient and scalable deployment of LLMs across a diverse range of applications.

Mechanistic edits (ablations, weight edits, activation steering) are the standard tools for unlearning a harmful capability from a neural network while preserving useful ones. Current approaches validate their effects only by testing, which can never cover an entire continuous region of inputs. Prior work at the interpretability-verification boundary certifies descriptions of a model: what a circuit computes, or whether it faithfully explains the whole. We instead certify the behavioral effect of an edit: that disabling a circuit removes one skill and provably preserves another, for every input in a region; a feature non-interference guarantee in the information-flow-security sense. We demonstrate such certified edits from toy ReLU networks up to a standard softmax + LayerNorm transformer, proving removal and preservation over continuous embedding-space regions and reaching roughly 9x the input-perturbation dimension an exact solver can handle by switching to sound bound propagation. Furthermore, we prove that no finite deterministic black-box test can certify removal, exhibiting an edit that passes exhaustive testing yet provably fails on a survivor pocket that can be made arbitrarily small. Guarantees hold on small, standard-architecture networks and, like any removal claim, presuppose that the target skill admits a decidable specification, a property which real-world harms may not have.

Large language models (LLMs) are increasingly deployed in settings that require nuanced ethical reasoning, yet existing bias evaluations treat model outputs as simply "biased" or "unbiased." This binary framing misses the gradual, context-sensitive way bias actually emerges. We address this gap in two stages: behavioral profiling and mechanistic validation. In the behavioral stage, we introduce the Moral Sensitivity Index (MSI), a metric that quantifies the probability of biased output across a graduated, seven-tier stress test ranging from abstract numerical problems to scenarios rooted in historical and socioeconomic injustice. Evaluating four leading models (Claude 3.5, Qwen 3.5, Llama 3, and Gemini 1.5), we identify distinct behavioral signatures shaped by alignment design: for instance, Gemini 1.5 reaches 72.7% MSI by Tier 5 under socioeconomic framing, while Claude exhibits sharp suppression consistent with identity-based safety training. We then verify these behavioral patterns mechanistically. We select criminal-bias scenarios, which produced the highest MSI scores across models, as probes and apply logit lens, attention analysis, activation patching, and semantic probing to a controlled set of six models spanning three capability tiers: small language models (SLMs), instruction-tuned base models, and reasoning-distilled variants. Circuit-level analysis reveals a U-curve of bias: SLMs exhibit strong criminal bias; scaling to instruction-tuned models eliminates it; reasoning distillation reintroduces bias to SLM-like levels despite identical parameter counts, suggesting distillation compresses reasoning traces in ways that reactivate shallow statistical associations. Critically, the socially loaded cues that drive high MSI scores activate the same bias-driving circuits identified mechanistically, providing cross-stage validation.

Diagrams matter. Unfortunately, the deep learning community has no standard method for diagramming architectures. The current combination of linear algebra notation and ad-hoc diagrams fails to offer the necessary precision to understand architectures in all their detail. However, this detail is critical for faithful implementation, mathematical analysis, further innovation, and ethical assurances. I present neural circuit diagrams, a graphical language tailored to the needs of communicating deep learning architectures. Neural circuit diagrams naturally keep track of the changing arrangement of data, precisely show how operations are broadcast over axes, and display the critical parallel behavior of linear operations. A lingering issue with existing diagramming methods is the inability to simultaneously express the detail of axes and the free arrangement of data, which neural circuit diagrams solve. Their compositional structure is analogous to code, creating a close correspondence between diagrams and implementation. In this work, I introduce neural circuit diagrams for an audience of machine learning researchers. After introducing neural circuit diagrams, I cover a host of architectures to show their utility and breed familiarity. This includes the transformer architecture, convolution (and its difficult-to-explain extensions), residual networks, the U-Net, and the vision transformer. I include a Jupyter notebook that provides evidence for the close correspondence between diagrams and code. Finally, I examine backpropagation using neural circuit diagrams. I show their utility in providing mathematical insight and analyzing algorithms' time and space complexities.

Large Language Models (LLMs) have demonstrated remarkable capabilities across various domains, including software development, education, and technical assistance. Among these, software development is one of the key areas where LLMs are increasingly adopted. However, when hardware constraints are considered-for instance, in physical computing, where software must interact with and control physical hardware -their effectiveness has not been fully explored. To address this gap, we introduce PCEval (Physical Computing Evaluation), the first benchmark in physical computing that enables a fully automatic evaluation of the capabilities of LLM in both the logical and physical aspects of the projects, without requiring human assessment. Our evaluation framework assesses LLMs in generating circuits and producing compatible code across varying levels of project complexity. Through comprehensive testing of 13 leading models, PCEval provides the first reproducible and automatically validated empirical assessment of LLMs' ability to reason about fundamental hardware implementation constraints within a simulation environment. Our findings reveal that while LLMs perform well in code generation and logical circuit design, they struggle significantly with physical breadboard layout creation, particularly in managing proper pin connections and avoiding circuit errors. PCEval advances our understanding of AI assistance in hardware-dependent computing environments and establishes a foundation for developing more effective tools to support physical computing education.

The integration of power electronic converters (PECs) and distributed energy resources (DERs) in modern power systems has introduced dynamism and complexity. Accurate simulation becomes essential to comprehend the influence of converter domination on the power grid. This study addresses the fast-switching and stochastic behaviors exhibited by inverter-based resources in converter-dominated power systems, highlighting the necessity for precise analytical models. In the realm of modeling real-world systems, multiple methodologies exist. Notably, black-box and data-driven system identification techniques are employed to construct PEC models using experimental data, without relying on a priori knowledge of the internal system physics. This approach entails a systematic process of model class selection, parameter estimation, and model validation. While a range of linear and nonlinear model structures and estimation algorithms are at our disposal, it remains imperative to harness creativity and a profound understanding of the physical system to craft data-driven models that align seamlessly with their intended applications. These applications may encompass simulation, prediction, control, or fault detection. This report offers valuable insights into the collection of datasets from commercial off-the-shelf inverters, along with the presentation of intricate simulation models.

In modern Very Large Scale Integrated (VLSI) circuit design flow, the Register-Transfer Level (RTL) stage presents a critical opportunity for timing optimization. Addressing timing violations at this early stage is essential, as modern systems demand higher speeds, where even minor timing violations can lead to functional failures or system crashes. However, traditional timing optimization heavily relies on manual expertise, requiring engineers to iteratively analyze timing reports and debug. To automate this process, this paper proposes ViTAD, a method that efficiently analyzes the root causes of timing violations and dynamically generates targeted repair strategies. Specifically, we first parse Verilog code and timing reports to construct a Signal Timing Dependency Graph (STDG). Based on the STDG, we perform violation path analysis and use large language models (LLMs) to infer the root causes of violations. Finally, by analyzing the causes of violations, we selectively retrieve relevant debugging knowledge from a domain-specific knowledge base to generate customized repair solutions. To evaluate the effectiveness of our method, we construct a timing violation dataset based on real-world open-source projects. This dataset contains 54 cases of violations. Experimental results show that our method achieves a 73.68% success rate in repairing timing violations, while the baseline using only LLM is 54.38%. Our method improves the success rate by 19.30%.

In this work, we provide an overview of circuits for quantum computing. We introduce gates used in quantum computation and then present resource cost measurements used to evaluate circuits made from these gates. We then illustrate how the gates shown are then combined into quantum circuits for basic arithmetic functions. Architectures for addition, subtraction, multiplication, and division are shown. We demonstrate how to calculate the resource costs of quantum circuits. We conclude this overview with by illustrating an application of the elementary quantum circuits for the image rotation operation.

The field of Explainable AI (XAI) is seeking to shed light on the inner workings of complex AI models and uncover the rationale behind their decisions. One of the models gaining attention are probabilistic circuits (PCs), which are a general and unified framework for tractable probabilistic models that support efficient computation of various probabilistic queries. Probabilistic circuits guarantee inference that is polynomial in the size of the circuit. In this paper, we improve the explainability of probabilistic circuits by computing a comprehensible, readable logical theory that covers the high-density regions generated by a PC. To achieve this, pruning approaches based on generative significance are used in a new method called PUTPUT (Probabilistic circuit Understanding Through Pruning Underlying logical Theories). The method is applied to a real world use case where music playlists are automatically generated and expressed as readable (database) queries. Evaluation shows that this approach can effectively produce a comprehensible logical theory that describes the high-density regions of a PC and outperforms state of the art methods when exploring the performance-comprehensibility trade-off.

Foundation models have recently extended beyond natural language and vision to timeseries domains, including physiological signals. However, progress in electrodermal activity (EDA) modeling is hindered by the absence of large-scale, curated, and openly accessible datasets. EDA reflects sympathetic nervous system activity and is widely used to infer cognitive load, stress, and engagement. Yet very few wearable devices provide continuous, unobtrusive sensing, and the only large-scale archive to date is proprietary. To address this gap, we compile EDAMAME, a collection of EDA traces from 24 public datasets, comprising more than 25,000 hours from 634 users. Using this resource, we train UME, the first dedicated foundation model for EDA. In eight out of ten scenarios, UME outperforms baselines and matches generalist timeseries foundation models while using 20x fewer computational resources. Our findings, however, also highlight the intrinsic challenges of EDA modeling, motivating further research to unlock its full potential. All datasets, model weights, and code are released to support further research.

Implementing quantum game theory on real hardware is challenging due to noise, decoherence, and limited qubit connectivity, yet such demonstrations are essential to validate theoretical predictions. We present one of the first full experimental realizations of the Battle of the Sexes game under the Eisert-Wilkens-Lewenstein (EWL) framework on IBM Quantum's ibm sherbrooke superconducting processor. Four quantum strategies (I, H, R(pi/4), R(pi)) were evaluated across 31 entanglement values gamma in [0, pi] using 2048 shots per configuration, enabling a direct comparison between analytical predictions and hardware execution. To mitigate noise and variability, we introduce a Guided Circuit Mapping (GCM) method that dynamically selects qubit pairs and optimizes routing based on real-time topology and calibration data. The analytical model forecasts up to 108% payoff improvement over the classical equilibrium, and despite hardware-induced deviations, experimental results with GCM preserve the expected payoff trends within 3.5%-12% relative error. These findings show that quantum advantages in strategic coordination can persist under realistic NISQ conditions, providing a pathway toward practical applications of quantum game theory in multi-agent, economic, and distributed decision-making systems.

Quantum Zeno Effect (QZE) has been one of the most interesting phenomena in quantum mechanics ever since its discovery in 1977 by Misra and Sudarshan [J. Math. Phys. 18, 756 (1977)]. There have been many attempts for experimental realization of the same. Here, we present the first ever simulation of QZE on IBM quantum experience platform. We simulate a two-level system for Rabi-driven oscillation and then disturb the time evolution by intermediate repetitive measurements using quantum gates to increase the survival probability of the qubit in the initial state. The circuits are designed along with the added intermediate measurements and executed on IBM quantum simulator, and the outcomes are shown to be consistent with the predictions. The increasing survival probability with the number of intermediate measurements demonstrates QZE. Furthermore, some alternative explanations for the obtained results are provided which leads to some ambiguity in giving the exact reasoning for the observed outcomes.

As the prevalence of Alzheimer's disease (AD) rises, improving mechanistic insight from non-invasive biomarkers is increasingly critical. Recent work suggests that circuit-level brain alterations manifest as changes in electroencephalography (EEG) spectral features detectable by machine learning. However, conventional deep learning approaches for EEG-based AD detection are computationally intensive and mechanistically opaque. Spiking neural networks (SNNs) offer a biologically plausible and energy-efficient alternative, yet their application to AD diagnosis remains largely unexplored. We propose a neuro-bridge framework that links data-driven learning with minimal, biophysically grounded simulations, enabling bidirectional interpretation between machine learning signatures and circuit-level mechanisms in AD. Using resting-state clinical EEG, we train an SNN classifier that achieves competitive performance (AUC = 0.839) and identifies the aperiodic 1/f slope as a key discriminative marker. The 1/f slope reflects excitation-inhibition balance. To interpret this mechanistically, we construct spiking network simulations in which inhibitory-to-excitatory synaptic ratios are systematically varied to emulate healthy, mild cognitive impairment, and AD-like states. Using both membrane potential-based and synaptic current-based EEG proxies, we reproduce empirical spectral slowing and altered alpha organization. Incorporating empirical functional connectivity priors into multi-subnetwork simulations further enhances spectral differentiation, demonstrating that large-scale network topology constrains EEG signatures more strongly than excitation-inhibition balance alone. Overall, this neuro-bridge approach connects SNN-based classification with interpretable circuit simulations, advancing mechanistic understanding of EEG biomarkers while enabling scalable, explainable AD detection.

Large Language Models (LLMs) have recently shown promise in streamlining hardware design processes by encapsulating vast amounts of domain-specific data. In addition, they allow users to interact with the design processes through natural language instructions, thus making hardware design more accessible to developers. However, effectively leveraging LLMs in hardware design necessitates providing domain-specific data during inference (e.g., through in-context learning), fine-tuning, or pre-training. Unfortunately, existing publicly available hardware datasets are often limited in size, complexity, or detail, which hinders the effectiveness of LLMs in hardware design tasks. To address this issue, we first propose a set of criteria for creating high-quality hardware datasets that can effectively enhance LLM-assisted hardware design. Based on these criteria, we propose a Multi-Grained-Verilog (MG-Verilog) dataset, which encompasses descriptions at various levels of detail and corresponding code samples. To benefit the broader hardware design community, we have developed an open-source infrastructure that facilitates easy access, integration, and extension of the dataset to meet specific project needs. Furthermore, to fully exploit the potential of the MG-Verilog dataset, which varies in complexity and detail, we introduce a balanced fine-tuning scheme. This scheme serves as a unique use case to leverage the diverse levels of detail provided by the dataset. Extensive experiments demonstrate that the proposed dataset and fine-tuning scheme consistently improve the performance of LLMs in hardware design tasks.

Previous theoretical and experimental research has shown that current NISQ devices constitute powerful platforms for analogue quantum simulation. With the exquisite level of control offered by state-of-the-art quantum computers, we show that one can go further and implement a wide class of Floquet Hamiltonians, or timedependent Hamiltonians in general. We then implement a single-qubit version of these models in the IBM Quantum Experience and experimentally realize a temporal version of the Bernevig-Hughes-Zhang Chern insulator. From our data we can infer the presence of a topological transition, thus realizing an earlier proposal of topological frequency conversion by Martin, Refael, and Halperin. Our study highlights promises and limitations when studying many-body systems through multi-frequency driving of quantum computers.

Quantum algorithms based on variational approaches are one of the most promising methods to construct quantum solutions and have found a myriad of applications in the last few years. Despite the adaptability and simplicity, their scalability and the selection of suitable ans\"atzs remain key challenges. In this work, we report an algorithmic framework based on nested Monte-Carlo Tree Search (MCTS) coupled with the combinatorial multi-armed bandit (CMAB) model for the automated design of quantum circuits. Through numerical experiments, we demonstrated our algorithm applied to various kinds of problems, including the ground energy problem in quantum chemistry, quantum optimisation on a graph, solving systems of linear equations, and finding encoding circuit for quantum error detection codes. Compared to the existing approaches, the results indicate that our circuit design algorithm can explore larger search spaces and optimise quantum circuits for larger systems, showing both versatility and scalability.

Superconducting Digital (SCD) technology offers significant potential for enhancing the performance of next generation large scale compute workloads. By leveraging advanced lithography and a 300 mm platform, SCD devices can reduce energy consumption and boost computational power. This paper presents a cross-layer modeling approach to evaluate the system-level performance benefits of SCD architectures for Large Language Model (LLM) training and inference. Our findings, based on experimental data and Pulse Conserving Logic (PCL) design principles, demonstrate substantial performance gain in both training and inference. We are, thus, able to convincingly show that the SCD technology can address memory and interconnect limitations of present day solutions for next-generation compute systems.

Quantum Computing has been evolving in the last years. Although nowadays quantum algorithms performance has shown superior to their classical counterparts, quantum decoherence and additional auxiliary qubits needed for error tolerance routines have been huge barriers for quantum algorithms efficient use. These restrictions lead us to search for ways to minimize algorithms costs, i.e the number of quantum logical gates and the depth of the circuit. For this, quantum circuit synthesis and quantum circuit optimization techniques are explored. We studied the viability of using Projective Simulation, a reinforcement learning technique, to tackle the problem of quantum circuit synthesis for noise quantum computers with limited number of qubits. The agent had the task of creating quantum circuits up to 5 qubits to generate GHZ states in the IBM Tenerife (IBM QX4) quantum processor. Our simulations demonstrated that the agent had a good performance but its capacity for learning new circuits decreased as the number of qubits increased.

As quantum computing transitions from theoretical physics to engineering applications, there is a growing need for accessible simulation tools that bridge the gap between abstract linear algebra and practical implementation. While text-based frameworks (like Qiskit or Cirq) are standard, they often present a steep learning curve for students and engineers accustomed to graphical system design. This paper introduces QuVI (Quantum Virtual Instrument), an open-source quantum circuit toolkit developed natively within the NI LabVIEW environment. Moving beyond initial proof-of-concept models, QuVI establishes a robust framework that leverages LabVIEW's "dataflow" paradigm, in which wires represent data and nodes represent operations, to provide an intuitive, visual analog to standard quantum circuit notation while enabling the seamless integration of classical control structures like loops and conditionals. The toolkit's capabilities are demonstrated by constructing and visualizing fundamental quantum algorithms and verifying results against theoretical predictions. By translating "Block Diagrams" directly into quantum state evolutions ("Bloch Spheres"), QuVI offers educators and researchers a powerful platform for prototyping quantum logic without leaving the graphical engineering workspace.