Daily Papers

Flow matching with clean-data prediction has shown that regressing the clean point can exploit low-dimensional structure more effectively than predicting an ambient noised quantity. We ask whether this principle remains useful after images are mapped into a learned latent space, where compression has already removed much of the raw pixel variability. We introduce JLT, a 130M latent diffusion Transformer over frozen FLUX.2 VAE codes, and compare clean-latent prediction with a matched velocity-prediction DiT under the same representation, backbone, and training settings. Although the three variables x, epsilon, and v are linearly convertible for a fixed corruption time, a local Gaussian analysis shows that velocity regression inherits an isotropic target-covariance floor and amplifies low-variance latent directions, while clean prediction damps them. On ImageNet 256 x 256, JLT-B/1 obtains FID-50K 2.50 with classifier-free guidance, with a large matched-target gap over velocity prediction. These results suggest that prediction targets in latent diffusion are representation-dependent geometric choices, rather than interchangeable algebraic parameterizations.

Distilling pretrained video diffusion models into few-step autoregressive (AR) generators typically combines student initialization with distribution matching distillation (DMD). An intermediate AR teacher can provide causally compatible targets for ODE initialization. However, causally compatible targets alone do not ensure high-quality generation under a short sampling schedule. We analyze the posterior-mean predictions favored by direct latent regression and empirically find that causal ODE initialization alleviates blur but still leaves fine detail unresolved. To address this limitation, we propose Representation Forcing, which learns few-step causal initialization through representation-space supervision rather than intermediate-teacher trajectory regression. The student is trained with teacher forcing by comparing clean predictions and training targets through normalized features of a frozen video diffusion transformer. This phase reuses the synthetic videos generated by a bidirectional model for AR teacher training and replaces both teacher training and causal ODE distillation, without generating additional causal ODE trajectories. The subsequent asymmetric DMD procedure remains unchanged. Empirical results show that, at four sampling steps, RepForcing better preserves generation quality than intermediate-teacher-based initialization before DMD. After DMD, our four-step chunk-wise model improves VBench Total from 84.04 to 84.66 (+0.62 points) and VisionReward from 6.326 to 10.074 (+59.25%) over the reported causal-ODE-based baseline.

Flow-matching models generate samples through iterative velocity predictions, but typically do not revisit these predictions using the intermediate representations that produced them. We introduce CorrFlow, a self-correcting flow-matching framework that reuses this information through a lightweight refiner. Under rectified-flow interpolation, the error of the one-step clean prediction equals the realized velocity residual scaled by the noise level. Motivated by this identity, the refiner learns to predict residual corrections from the base model's clean prediction, conditioning, noise level and hidden states from the same forward pass. The correction is added to the base velocity before each sampling update, so subsequent predictions are made from the corrected state. This requires no additional base-model evaluations and only one lightweight refiner evaluation per step. Our theoretical analyses establish conditions under which feature reuse outperforms raw-input affine predictors and refiner training achieves greater residual-risk reduction than continued base-model training under a matched training compute budget. Experiments on class-conditional image generation, text-to-video generation and image-to-video generation show consistent improvements over the corresponding base models, including gains in visual quality and physical consistency. Project Page: https://fogradio.github.io/corrflow-project

Modern generative models possess a deep understanding of visual content, yet training them for image editing typically requires massive datasets of paired examples. This limits scalability, especially for video editing where collecting paired data is prohibitively expensive. We propose Bootstrap Your Generator (ByG), a general framework for unpaired training of flow matching editing models. It leverages the base model's knowledge without any external signal. Our approach pairs instruction-following cues extracted from the frozen model with cycle-consistency for structure preservation. To make this tractable, we propose to route gradients from downstream losses over clean predictions to noisy training states. We demonstrate state-of-the-art results on challenging data-scarce image and video editing scenarios. Extensive evaluations and user studies show that our method effectively generalizes to unseen domains and outperforms supervised baselines trained on millions of samples. Analysis reveals that our gradient routing bridges the train-inference gap, and extracting semantic cues from a base model provides a robust training signal that obviates the need for external reward models.

Autoregressive video diffusion supports streaming generation and interactive control, but its KV cache grows continuously with the generated history. Existing compression strategies either discard history using fixed windows or select tokens through local attention and similarity signals, which do not directly measure whether the current chunk contributes information beyond the retained context. We introduce DeCoPrune, a training-free method that treats cache compression as a denoising-consistency problem. We find empirically that denoising difficulty provides a useful proxy for a token's value in long-term retention: tokens with larger step-to-final discrepancies tend to carry visual evidence that is less predictable from the retained context. DeCoPrune measures each current-chunk token's denoising difficulty using the discrepancy between its intermediate clean prediction and final denoised value, retaining high-discrepancy tokens in the long-term cache while pruning those with low discrepancy. To evaluate information retention, we introduce CMBench, comprising 58 approximately one-minute generated or real-world context episodes and 116 Reappear or Revisit continuation tasks that require recalling specific previously observed objects or scenes. Experiments with LingBot World v2 show that DeCoPrune preserves near-FullKV long-range recall while pruning over 85% of historical KV tokens and accelerating continuation generation by over 4times, substantially outperforming the evaluated compression baselines at comparable budgets. These results indicate that denoising consistency can serve as a model-intrinsic signal for retaining long-range information while reducing autoregressive inference cost. Our project homepage is https://decoprune.github.io. The code is available at https://github.com/DeCoPrune/CMBench, and the benchmark at https://huggingface.co/datasets/Aoraku/CMBench.

Fully continuous diffusion language models (dLMs) denoise continuous representations without intermediate discretization, then decode all response tokens in parallel at the final step. Their performance on challenging reasoning tasks remains less established than that of autoregressive (AR) LLMs and masked dLMs. We scale Embedded Language Flows (ELF) to mathematical reasoning and code generation on GSM8K, MATH-500, HumanEval, and MBPP. We introduce ELF-REG, which improves learning with representation alignment and entanglement (REPA+REG), where a frozen AR teacher supervises intermediate denoiser features and supplies a global representation that is jointly denoised with the response. ELF-REG-L achieves 55.96% pass@1 on GSM8K at 64 network function evaluations (NFE), and 13.39% on MATH-500 and 22.56% on HumanEval at 128 NFE. It outperforms the evaluated comparable-scale dLMs in pass@1 on GSM8K and code, and improves MATH-500 pass@1 from 10.55% for the ELF-L baseline to 13.39% with ELF-REG-L. Without few-step training, the same task-specific checkpoints support strong low-NFE performance through early-stop, which decodes an intermediate clean prediction without completing the denoising trajectory. At 16 NFE, ELF-REG-L reaches 41.21% HumanEval pass@10, outperforming recent continuous dLMs of comparable scale.

Removing an input-scaling module changes both a classifier and the perturbations reaching its encoder. A robustness difference can therefore reflect the comparison rule as well as the module. We demonstrate this problem in a four-qubit quantum-attention detector on generated power-grid trajectories. A learned scaling module appears beneficial at a fixed physical attack budget, but matching an upper bound on perturbations at the encoder reverses the ordering. Neither comparison alone establishes a robustness benefit caused by the module. The initial test also perturbs clean examples into attacked examples while retaining their original labels; tests restricted to already attacked examples do not establish a benefit. Replacing a trained model's input scales disrupts detection. Retraining its linear classification layer restores the detection rate, but changes individual predictions, leaving the comparison descriptive rather than causal. Two further design checks explain why the input quantum Fisher information regularizer cannot train this model's query parameters, and why removing confidence bounds does not establish a larger certified radius. The evidence is limited to ten seeds, exact simulation, synthetic data, and a restricted set of attacks; classical baselines achieve better clean prediction. The practical lesson is to specify which perturbation budget is fixed, check that attacks preserve labels and interventions preserve predictions, and distinguish exploratory controls from confirmatory evidence.

Masked diffusion language models (MDLMs) generate text by iteratively unmasking tokens, but their standard decoder reduces each step to a binary action: a position is either committed to a single token or left fully masked, discarding rich predictive information rather than carrying it forward, and forcing premature, irrevocable commitments that lead to poor performance under a limited decoding budget. In this paper, we reinterpret mask prediction as a clean-state prediction (x-prediction) and show that it can be used to induce a continuous flow in the input embedding space. Building on this view, we propose a continuous decoding framework for MDLMs where tokens can accumulate partial progress at each diffusion step and remain revisable. To match the uneven contextual constraints across positions in language, we replace the globally synchronous schedule in image diffusion with a confidence-based asynchronous update in which the diffusion progress is token-wise accumulated. Additionally, we introduce a lightweight policy network and formulate its training as a reinforcement learning problem. Applied to pretrained LLaDA, our decoder retains 83--97% of full-budget accuracy using under 15% of the diffusion steps, largely outperforming discrete mask-prediction decoding at matched budgets.

Diffusion and flow models, as promising generative paradigms for speech enhancement, face a training--inference mismatch: training uses analytical path states, whereas inference recursively evaluates models on self-generated rollout states along discretized sampling trajectories. This mismatch causes prediction and discretization errors to accumulate. To address it, we introduce Corrective Forcing (CoF), a post-training paradigm that forces diffusion and flow models to learn from self-generated rollouts and correct their predictions. CoF corrects clean-speech predictions on rollout states toward the ground truth under dynamic sampling schedules, exposing the model to varying inference conditions. It further regularizes local evolution using locally corrected counterfactual transitions as references for factual transitions. By expressing model outputs through a shared clean-speech prediction parameterization, CoF applies the same post-training objective across diffusion and flow formulations. Experiments with SB-VE and OT-CFM demonstrate improvements in perceptual quality and reconstruction fidelity, together with robust performance across different numbers of sampling steps.

As a new paradigm of visual content generation, autoregressive text-to-image models suffer from slow inference due to their sequential token-by-token decoding process, often requiring thousands of model forward passes to generate a single image. To address this inefficiency, we propose Speculative Jacobi-Denoising Decoding (SJD2), a framework that incorporates the denoising process into Jacobi iterations to enable parallel token generation in autoregressive models. Our method introduces a next-clean-token prediction paradigm that enables the pre-trained autoregressive models to accept noise-perturbed token embeddings and predict the next clean tokens through low-cost fine-tuning. This denoising paradigm guides the model towards more stable Jacobi trajectories. During inference, our method initializes token sequences with Gaussian noise and performs iterative next-clean-token-prediction in the embedding space. We employ a probabilistic criterion to verify and accept multiple tokens in parallel, and refine the unaccepted tokens for the next iteration with the denoising trajectory. Experiments show that our method can accelerate generation by reducing model forward passes while maintaining the visual quality of generated images.

Discrete diffusion models are often trained through clean-data prediction, but the prediction can be used in different ways to define the reverse dynamics. In Masked Diffusion Models (MDM) these choices largely coincide, whereas in Uniform Diffusion Models (UDM) they do not. We show that the standard plug-in bridge parameterization for UDM is not optimized by the denoising posterior, but by a leave-one-out posterior that predicts each clean token without using its own noisy observation. This identifies a mismatch between the plug-in ELBO and the usual cross-entropy denoising objective. We characterize the leave-one-out target and derive exact conversions between the denoiser, the leave-one-out posterior, and the score. These conversions allow us to disentangle parameterization and training objective. Our results also lead to inference improvements without any additional training through an informed predictor-corrector sampler and improved temperature sampling based on the leave-one-out predictor. We further introduce an absorbing-state reformulation of uniform diffusion that preserves the UDM joint law while decomposing it into masked-diffusion-like sampling operations, with simpler denoising posteriors, carry-over unmasking, and a natural remasking mechanism. On language modeling, leave-one-out parameterizations consistently improve UDM generation, while the absorbing construction matches or surpasses masked diffusion. These results suggest that the empirical gap between masked and uniform diffusion is driven less by the choice of marginals themselves than by parameterization and sampling design. The code and models can be found at https://github.com/samsongourevitch/rev_udm.

Mobile manipulation extends robot interaction beyond a fixed kinematic workspace by making the reachable region itself controllable. This flexibility introduces two central challenges: spatially grounded perception under continuous ego-motion and coordinated control of heterogeneous arm and base actions. Existing approaches strengthen geometry through explicit 3D representations or predictive world models, and often decouple mobility and manipulation into separate action streams. We argue that effective mobile manipulation requires not only decoupling, but also representations that support efficient cross-stream collaboration. We present MM-ABC, a foundation model built around Seeing, Coordinating, and Imagining Arm-Base Collaboration. MM-ABC combines sparse multi-level VLM features for spatial perception; a training-only future branch that uses world imagination and geometric intent as extra supervision, strengthening perception and manipulation-intent prediction and improving the overall learning signal; and MM-APT, which coordinates separate manipulation and mobility streams through masked joint attention and clean-action x-prediction. In controlled ablations, replacing clean-action prediction with velocity prediction lowers success on RoboCasa365 composite-seen tasks from 32.8% to 29.2%, and removing future supervision or multilevel conditioning causes larger drops. We pretrain MM-ABC on 5,000+ hours of heterogeneous robot data spanning 400K+ episodes, 12 datasets, and 17 embodiments. Experiments cover EBench, RoboCasa365, ManiSkill-HAB, LIBERO, LIBERO-Plus, and real-world mobile manipulation. MM-ABC achieves 44.71% success on EBench, 61.2% on RoboCasa365, 99.1% on LIBERO, 82.8% on LIBERO-Plus without perturbation training, and 83% mean success on five real-world tasks.

Visual counterfactual explanations aim to change classifier decisions through realistic and localized edits while preserving decision-irrelevant content. Existing DDPM-based methods typically perform classifier-guided editing along a long reverse denoising trajectory. The changing noise levels make semantic editability and spatial control difficult to balance, and the editable state is noisy, whereas the target classifier is trained on clean images. As a result, these methods require either costly recursive denoising or low-quality one-step estimates to obtain classifier-facing clean images. We propose FiRe, a Fixed-noise Refinement framework for visual counterfactual explanations. Rather than following a reverse denoising trajectory, FiRe maps the input to a fixed noise level and iteratively refines the noisy state at that level. To provide clean images for classifier guidance, FiRe first adapts Pixel Mean Flow to visual counterfactual explanation, enabling direct clean-image prediction from noisy states. To make fixed-noise refinement produce minimal and localized counterfactual edits, FiRe introduces three FiRe-specific controls: a dynamic dual-mask strategy, adaptive guidance, and early stopping, which determine where edits accumulate, which changes become visible, and when refinement stops. Experiments on five tasks across three datasets show that, compared with the strongest recent baseline, FiRe achieves about 3times faster online inference and 8times fewer FLOPs while obtaining comparable or state-of-the-art counterfactual quality.

Unified Multimodal Models (UMMs) often rely on separate visual representations for understanding and generation, increasing visual context length and complicating integration with established vision-language pretraining pipelines. Recent advances in pixel-space modeling offer an encoder-free alternative, but extending this paradigm from images to videos is non-trivial: video understanding and generation adopt different temporal representations, leaving the design of a unified visual interface an open question. We present PixelUMM, an encoder-free model for unified image and video understanding and generation directly in pixel space. PixelUMM represents images as spatial patches and videos as spatiotemporal tubelets, connecting raw pixels to a shared multimodal backbone through single-layer linear projections. Its Mixture-of-Transformers architecture combines shared attention with task-specific parameters and extends clean-pixel prediction to video generation, jointly supporting autoregressive text prediction and pixel-space flow matching. Experiments show that PixelUMM achieves competitive performance across image and video understanding and generation tasks. We further conduct empirical studies of key design choices, including decoder design and spatial-temporal patch size, providing insights for future pixel-space unified multimodal models.

Reinforcement learning can align diffusion models with human preferences and task-specific objectives, but endpoint rewards do not specify how an intermediate denoising prediction should change. We introduce DiffusionOPSD as an on-policy self-distillation framework that converts image-level reward guidance into explicit targets for clean-output predictions at sampled queries. At each outer iteration, a frozen behavior policy generates trajectories and supplies query states and anchors. Reward gradients construct bounded positive and negative targets around each anchor. The trainable policy fits these targets as detached supervision through finite fitting before an exponential moving average update refreshes the behavior policy. This setup lets us measure target construction and finite realization separately. Controlled same-query experiments show that larger target-construction gains do not necessarily translate into larger realized gains after a single fitting update. Across SD 3.5-M and the step-distilled Z-Image-Turbo, our approach achieves the best final held-out scores in 19 of 20 reward-matched settings across two backbones and ten evaluators. It outperforms the strongest competing method by up to 44.0% and reduces training GPU-hours relative to DiffusionNFT by 40% on SD 3.5-M and 63% on Z-Image-Turbo. These results support on-policy self-distillation as an efficient and analyzable approach to diffusion post-training by converting image-level reward guidance into explicit and continually refreshed intermediate supervision, thereby opening a path toward more efficient and diagnosable alignment.

Recent text-to-motion models have improved motion quality and instruction following, yet many-step denoising and large model components make deployment slow and memory-intensive. We present Terminal-Amplification-Controlled Distillation (TACD), an on-policy approach for training efficient motion generators from text prompts and pretrained teachers, without real-motion training data. Building on segmented on-policy flow distillation, we supervise clean-motion predictions along student-generated trajectories. We identify a failure mode in which velocity matching on a fixed supervision grid repeatedly overweights errors near the denoising endpoint, degrading few-step generation. TACD ties the latest teacher query to the student's step size, bounding the effective loss weights in clean-motion space without changing inference. Experiments on HumanML3D and KIT-ML demonstrate improved few-step generation, including a 58% reduction in eight-step HY-Motion student FID relative to distillation without this bound. For diffusion teachers, the endpoint-matching form of TACD yields four-step students with lower FID and matched or improved text-motion retrieval relative to their 50-step teachers on HumanML3D. On HY-Motion and Kimodo, eight-step students with compact components achieve 7.7-11.9x end-to-end speedups and reduce peak GPU memory by 3.8-6.7x relative to their teachers. Project page: https://vkgo.github.io/TACD/

Language remains an outlier in generative modeling: while images, video, and audio are increasingly modeled in continuous latent spaces, text generation still relies predominantly on discrete tokens. Existing continuous language models either inherit embedding spaces not designed for joint generation and decoding, or compress autoencoded latents to ease diffusion, sacrificing token-level fidelity. Instead of simplifying the representation to suit the generative model, we preserve a high-capacity, decodable text latent and design the diffusion model to learn its distribution directly. We introduce AURORA-LM, a continuous-latent diffusion language model that separates the construction of a decodable text representation from the modeling of its distribution. A Query-based Encoder-Decoder organizes text into a high-capacity, prefix-aligned latent sequence, and a Block-causal Diffusion Transformer learns its distribution through flow matching, generating blocks left to right while denoising positions within each block in parallel. Because such a latent is harder for diffusion to model, AURORA-LM restricts only the noisy-input pathway while retaining the full clean-latent prediction target, accommodating full-width latents without reducing decoder-facing capacity. We further calibrate the noise-level distribution to the latent width, and introduce self-trajectory consistency to bridge independently sampled training noise and iterative denoising at inference. AURORA-LM achieves the strongest performance among evaluated continuous and diffusion-based language models on OpenWebText free generation and XSum summarization. Scaling to 1B parameters with about 1500 EFLOPs of total compute yields further gains, surpassing a larger publicly released latent-diffusion language model under a matched evaluation protocol. All experiments are conducted on Ascend NPUs.

High-fidelity 3D MRI synthesis requires both globally coherent anatomy and fine-grained voxel-level detail. Although latent diffusion makes volumetric generation tractable, its image autoencoder introduces a reconstruction bottleneck that can limit the fine detail recoverable in the final volume. We present VoxStruct3D, a voxel-space flow-matching framework that directly models full-resolution MRI volumes using a clean-data prediction objective. Its Volumetric Voxel Generator (VVG) combines factorized 3D patch embedding with overlapping upsampling, time-modulated residual refinement, and skip fusion, enabling neighboring tokens to jointly reconstruct shared voxel regions and suppress patch-boundary artifacts. To complement direct voxel-space modeling with an explicit anatomical prior, we further introduce a Structure-First, Image-Follows (SFIF) strategy. A frozen pretrained 3D medical encoder and a StructVAE extract compact structure tokens that preserve dominant anatomy, while a structure-leading schedule keeps their trajectory ahead of the image trajectory. Patch-Aligned RoPE spatially aligns the unequal token grids, and asymmetric attention enforces one-way guidance from structure to image. Experiments on pathological and healthy T1-weighted brain MRI datasets show that VoxStruct3D achieves the strongest overall performance across feature-distribution alignment, sample diversity, and perceptual quality, producing anatomically coherent and visually realistic volumes.

Joint embedding predictive architectures (JEPAs) predict future latent representations without reconstructing observations, enabling world models to focus on high-level semantic dynamics. However, a JEPA can preserve high dimensional visual information while discarding information about the physical consequences of actions. We call this failure mode causal dynamics information collapse and propose action-grounded vision-invariance latent (AVL) to prevent this collapse. We first use the executed action as an auxiliary dynamics anchor that encourages the model to preserve dynamics information, and then use a vision-invariance pathway which aligns perturbed and clean latent predictions without discarding dynamics information, forcing the model to fully understand and utilize causal dynamics information. We validate AVL on four robotic control tasks (TwoRoom, PushT, OGBench Cube, and Reacher), showing that it substantially improves success rates under visual perturbations while preserving clean-environment performance. We further evaluate physical consequence alignment, clean-noisy dynamics consistency, and the causal effect of targeted transition subspace erasure. Collectively, these results indicate that dynamic information causally relevant to planning is preserved from collapse under AVL.

Iterative sampling in diffusion models can lead to error accumulation due to exposure bias. The denoiser is trained on real images interpolated with noise, but at inference its inputs are constructed from its own imperfect predictions from the earlier steps, something it has never seen at training time. This might be one reason diffusion models often struggle without additional help, such as CFG. We introduce a correction step for diffusion models which attempts to reduce this training-inference gap. The corrector takes the base model's prediction as input and is trained against the same ground-truth target. This makes correction an explicit learning task, with training inputs provided by the base model. During sampling, at each denoising step, we iteratively refine the denoiser's clean-sample prediction. This allows us to correct predictions at intermediate denoising steps, preventing early artifacts from persisting into the final sample. Although the corrector is trained only on predictions from the base denoiser, it can be applied repeatedly to its own outputs at inference for better results. This simple framework leads to substantial improvement in sample quality while largely preserving diversity. We evaluate our method across DiT, SiT, and JiT. Our method substantially improves upon previously reported FID scores for unguided generation and, notably, unconditional generation, where producing high-quality samples without guidance has been particularly challenging. Our method achieves performance competitive with classifier-free guidance (CFG), and combining correction with CFG further improves diversity and reduces oversaturation typical of CFG. Finally, we show that the additional inference cost of correction can be amortized by distilling the refined predictions back into the base diffusion model, retaining the quality gains without additional inference-time overhead.

Robustness evaluation must examine diverse visual perturbations, while benchmarks cover only some real-world conditions and physical testing is costly. Paired evaluations link clean and perturbed predictions for the same image, capturing changes in correctness, confidence, and acceptance beyond aggregate accuracy. We investigate how this image correspondence supports two needs in robustness evaluation: interpreting paired evaluation results and prioritizing samples for physical testing. To interpret paired evaluation results, we fix both sets of prediction records and vary their correspondence within each class. We prove that classwise correct-correct counts give the same sharp bounds on lost acceptance and mean true-class probability decrease among retained-correct inputs as any feasible five-state refinement. Distinguishing persistent from changed wrong answers can further constrain accepted-error transitions, while shared correspondence can establish policy orderings left unresolved by separate cost intervals. To prioritize samples for physical testing, we retain each image's synthetic responses and rank clean-correct images by their mean true-class probability under corruption. Across 44 classifiers, testing the highest-risk 20% finds 67% and 45% of failures under mild screen and print recaptures, versus 58% and 36% for clean confidence and 60% and 37% for an equal-size natural-transformation average. With both probability averaging and an A3Rank scoring adaptation, the tested corruption set yields higher mean failure recall than the natural-transform set; differences between scores depend on the source and budget. Together, these findings show that the value of correspondence depends on the evaluation objective: classwise counts suffice for specified reliability bounds, while image-specific synthetic responses improve the allocation of physical tests within the evaluated pool.

World models that forecast scene evolution by generating future video frames devote the bulk of their capacity to photometric details, yet the resulting predictions often remain geometrically inconsistent. We present VGGT-World, a geometry world model that side-steps video generation entirely and instead forecasts the temporal evolution of frozen geometry-foundation-model (GFM) features. Concretely, we repurpose the latent tokens of a frozen VGGT as the world state and train a lightweight temporal flow transformer to autoregressively predict their future trajectory. Two technical challenges arise in this high-dimensional (d=1024) feature space: (i) standard velocity-prediction flow matching collapses, and (ii) autoregressive rollout suffers from compounding exposure bias. We address the first with a clean-target (z-prediction) parameterization that yields a substantially higher signal-to-noise ratio, and the second with a two-stage latent flow-forcing curriculum that progressively conditions the model on its own partially denoised rollouts. Experiments on KITTI, Cityscapes, and TartanAir demonstrate that VGGT-World significantly outperforms the strongest baselines in depth forecasting while running 3.6-5 times faster with only 0.43B trainable parameters, establishing frozen GFM features as an effective and efficient predictive state for 3D world modeling.

Adversarial distillation transfers robustness from high-capacity teachers to compact students. Existing adversarial distillation methods mainly use teacher predictions on clean or adversarial examples to supervise student learning. However, teacher-favorable supervision within the perturbation neighborhood remains underexplored in adversarial distillation. We therefore propose Collaboratively Guided Adversarial Robust Distillation (CGARD), which jointly optimizes distinct student-adversarial and teacher-collaborative examples within the same perturbation neighborhood. The teacher-collaborative example is constrained to incur no greater cross-entropy loss under the teacher than the clean input. CGARD combines collaborative teacher guidance with adversarial teacher supervision to improve robust knowledge transfer. Experiments on CIFAR-10 and CIFAR-100, including white-box evaluation and additional black-box transfer evaluation, demonstrate consistent robustness improvements over strong adversarial distillation baselines.

Relying on large-scale training data with pixel-level labels, previous edge detection methods have achieved high performance. However, it is hard to manually label edges accurately, especially for large datasets, and thus the datasets inevitably contain noisy labels. This label-noise issue has been studied extensively for classification, while still remaining under-explored for edge detection. To address the label-noise issue for edge detection, this paper proposes to learn Pixel-level NoiseTransitions to model the label-corruption process. To achieve it, we develop a novel Pixel-wise Shift Learning (PSL) module to estimate the transition from clean to noisy labels as a displacement field. Exploiting the estimated noise transitions, our model, named PNT-Edge, is able to fit the prediction to clean labels. In addition, a local edge density regularization term is devised to exploit local structure information for better transition learning. This term encourages learning large shifts for the edges with complex local structures. Experiments on SBD and Cityscapes demonstrate the effectiveness of our method in relieving the impact of label noise. Codes will be available at github.

Streaming spoken agents may produce the correct final action after acting too early. Final-turn scores do not reveal whether each observed speech prefix supports an exposed action. We introduce the Partial Speech Action Contract for Turn Taking in Speech Language Models (PACT-SLM), a controlled test that assigns the first valid action time and evaluates both action identity and timing. In the primary test, 80 paired contrast groups from four held-out semantic families yield 1,600 prefix predictions across clean and 15 dB noise renderings. Using source-utterance semantic targets rather than counterbalanced branch codes, WavLM Base Plus reaches 26.03% pooled post-onset semantic-label accuracy (95% group-bootstrap interval [22.14%, 29.68%]), exposes an action on 18.99% of pre-onset prefixes, and predicts 5.94% of complete trajectories exactly. Its pooled label score is at the 96th percentile of 100 within-prefix label permutations, below the 97.5th-percentile reference (26.73%). It exceeds matched text, scalar-acoustic, and shuffled-representation probes in pooled post-onset label accuracy. Elapsed time is more onset-exact (36.25% versus 23.13%) but less accurate about action identity (9.92% versus 26.03%). These results motivate separate measurement of action identity and onset timing in partial-speech evaluations.

This paper presents a speech intelligibility model based on automatic speech recognition (ASR), combining phoneme probabilities from deep neural networks (DNN) and a performance measure that estimates the word error rate from these probabilities. This model does not require the clean speech reference nor the word labels during testing as the ASR decoding step, which finds the most likely sequence of words given phoneme posterior probabilities, is omitted. The model is evaluated via the root-mean-squared error between the predicted and observed speech reception thresholds from eight normal-hearing listeners. The recognition task consists of identifying noisy words from a German matrix sentence test. The speech material was mixed with eight noise maskers covering different modulation types, from speech-shaped stationary noise to a single-talker masker. The prediction performance is compared to five established models and an ASR-model using word labels. Two combinations of features and networks were tested. Both include temporal information either at the feature level (amplitude modulation filterbanks and a feed-forward network) or captured by the architecture (mel-spectrograms and a time-delay deep neural network, TDNN). The TDNN model is on par with the DNN while reducing the number of parameters by a factor of 37; this optimization allows parallel streams on dedicated hearing aid hardware as a forward-pass can be computed within the 10ms of each frame. The proposed model performs almost as well as the label-based model and produces more accurate predictions than the baseline models.

In diffusion transformers, a class label or a text prompt is embedded once, and the same condition is reused at every denoising step. We ask whether predicted embeddings can serve as this condition instead. Next-Embedding Predictive Autoregression (NEPA) trains a Transformer to predict the next continuous embedding in a sequence. In generation, the clean image follows the noisy image, so its embeddings are the next embeddings after the condition and the noisy image. We train a NEPA model to predict them all at once with Multi-Embedding Prediction, and in Embedding Conditioned Generation, a DiT generator is conditioned on these predictions, recomputed at every denoising step, so the conditioning signal adapts to the current noisy state. Experiments on class-conditional ImageNet 256times256 study the condition of the generator, the design of Multi-Embedding Prediction, and the scaling of both models. The NEPA model adds a second network to every sampling step; with it, and combined with REPA, our final model, NEPA-DiT-XL, reaches an FID of 1.32 using about a third of the training compute of REPA.

Generalist robot policies aim to map multimodal observations and linguistic task instructions to actions across diverse tasks. However, existing methods typically represent the future as a fixed, short video-action chunk. This short-term future captures local scene evolution for action execution, but it does not explicitly describe the stage-level future that specifies how a task should progress from its current stage to the next. We therefore distinguish two complementary futures for robot manipulation: a short-term physical future to capture local scene evolution and a stage-level semantic future to represent task progress. We introduce StageWAM, which augments a Motus-based World Action Model (WAM) with Stage-JEPA, a goal-conditioned Joint-Embedding Predictive Architecture (JEPA) predictor. Given the current observation and task instruction, Stage-JEPA uses a frozen V-JEPA2 encoder to extract the current-state representation and predicts the latent target of the next inferred stage. Across 50 RoboTwin 2.0 tasks in clean and randomized environments, StageWAM achieves 90.25% overall success and reduces the mean number of execution steps in successful rollouts by 5.97% relative to the strongest baseline.

Generative modeling of graph-structured data is crucial for tasks ranging from drug discovery to social network simulation. Among these models, denoising diffusion models have achieved great success in graph generation by learning to progressively reverse a process that adds noise to the original graph. However, the standard noise-prediction approach of diffusion models is suboptimal for graph data. The goal for a graph generative model is to learn the clean graphs' topological properties, such as connectivity and degree distribution. Because a diffusion model that predicts noise does not explicitly learn these topological properties, it is challenging for the model to output graphs with the desired structural statistics. To address this challenge, we introduce Direct Graph Flow Matching (DiGFM), a novel graph transformer model guided by two goals: predict clean graphs and improve sampling efficiency. Distinct from the prevailing diffusion approach, DiGFM employs a continuous flow-matching paradigm and integrates direct graph prediction. Specifically, DiGFM maps the prior noise distribution to the clean graph distribution via a multi-step process: the model repeatedly predicts the underlying clean graph, and a transformation is employed to convert the model output to the velocity vector that points in the direction toward the clean graph distribution. This design enables DiGFM to generate high-quality samples using only 2.5% to 15.6% of the steps required by diffusion-based models, which leads to a 5.3x to 257x speedup in wall-clock inference time. Experiments demonstrate that DiGFM outperforms or matches prior state-of-the-art models across general graph benchmarks and molecular datasets, generating graphs with strong adherence to ground-truth structural statistics at significantly faster inference speeds.

Diffusion models are promising for joint trajectory prediction and controllable generation in autonomous driving, but they face challenges of inefficient inference steps and high computational demands. To tackle these challenges, we introduce Optimal Gaussian Diffusion (OGD) and Estimated Clean Manifold (ECM) Guidance. OGD optimizes the prior distribution for a small diffusion time T and starts the reverse diffusion process from it. ECM directly injects guidance gradients to the estimated clean manifold, eliminating extensive gradient backpropagation throughout the network. Our methodology streamlines the generative process, enabling practical applications with reduced computational overhead. Experimental validation on the large-scale Argoverse 2 dataset demonstrates our approach's superior performance, offering a viable solution for computationally efficient, high-quality joint trajectory prediction and controllable generation for autonomous driving. Our project webpage is at https://yixiaowang7.github.io/OptTrajDiff_Page/.

In this paper, we present ApacheJIT, a large dataset for Just-In-Time defect prediction. ApacheJIT consists of clean and bug-inducing software changes in popular Apache projects. ApacheJIT has a total of 106,674 commits (28,239 bug-inducing and 78,435 clean commits). Having a large number of commits makes ApacheJIT a suitable dataset for machine learning models, especially deep learning models that require large training sets to effectively generalize the patterns present in the historical data to future data.

Backdoor attacks manipulate model predictions by inserting innocuous triggers into training and test data. We focus on more realistic and more challenging clean-label attacks where the adversarial training examples are correctly labeled. Our attack, LLMBkd, leverages language models to automatically insert diverse style-based triggers into texts. We also propose a poison selection technique to improve the effectiveness of both LLMBkd as well as existing textual backdoor attacks. Lastly, we describe REACT, a baseline defense to mitigate backdoor attacks via antidote training examples. Our evaluations demonstrate LLMBkd's effectiveness and efficiency, where we consistently achieve high attack success rates across a wide range of styles with little effort and no model training.

Pretrained generative Diffusion Transformers (DiTs) capture rich pixel-level visual and language-conditioned structure through large-scale image and video generation training. A growing line of robot policies builds on this generative prior, but how it should be transferred to control remains unclear, and existing approaches commonly instantiate this transfer through future visual prediction. We ask a more basic question: what a pretrained generative DiT actually contributes to action learning, and how this prior should be adapted for control. We introduce NowWAM, a future-target-free co-training formulation that denoises the current observation and predicts robot actions from the same visual stream, directly coupling the native generative objective to the action-facing representation across the denoising trajectory. Under matched controlled settings, past and future visual targets perform comparably, while restricting training to the clean endpoint substantially reduces robustness, suggesting that a separate future target is not essential for generative adaptation, while the denoising trajectory remains an effective interface for control. On LIBERO-Plus, NowWAM reaches 87.7% with FLUX2-Klein, improving over the future-target co-training baseline by 6.1 points while halving training visual tokens (784 to 392) and reducing step time from 2.85 s to 1.63 s, a 1.8x speedup. With the pure text-to-image Z-Image backbone, NowWAM further reaches 87.8%, showing that strong control adaptation is not tied to video generation or image-editing backbones.

Large Language Models (LLMs) are increasingly evaluated on multiple-choice question answering (MCQA) tasks using *first-token probability* (FTP), which selects the answer option whose initial token has the highest likelihood. While efficient, FTP can be fragile: models may assign high probability to unrelated tokens (*misalignment*) or use a valid token merely as part of a generic preamble rather than as a clear answer choice (*misinterpretation*), undermining the reliability of symbolic evaluation. We propose a simple solution: the *prefilling attack*, a structured natural-language prefix (e.g., "*The correct option is:*") prepended to the model output. Originally explored in AI safety, we repurpose prefilling to steer the model to respond with a clean, valid option, without modifying its parameters. Empirically, the FTP with prefilling strategy substantially improves accuracy, calibration, and output consistency across a broad set of LLMs and MCQA benchmarks. It outperforms standard FTP and often matches the performance of open-ended generation approaches that require full decoding and external classifiers, while being significantly more efficient. Our findings suggest that prefilling is a simple, robust, and low-cost method to enhance the reliability of FTP-based evaluation in multiple-choice settings.

Recovering pixel-wise geometric properties from a single image is fundamentally ill-posed due to appearance ambiguity and non-injective mappings between 2D observations and 3D structures. While discriminative regression models achieve strong performance through large-scale supervision, their success is bounded by the scale, quality and diversity of available data and limited physical reasoning. Recent diffusion models exhibit powerful world priors that encode geometry and semantics learned from massive image-text data, yet directly reusing their stochastic generative formulation is suboptimal for deterministic geometric inference: the former is optimized for diverse and high-fidelity image generation, whereas the latter requires stable and accurate predictions. In this work, we propose Lotus-2, a two-stage deterministic framework for stable, accurate and fine-grained geometric dense prediction, aiming to provide an optimal adaption protocol to fully exploit the pre-trained generative priors. Specifically, in the first stage, the core predictor employs a single-step deterministic formulation with a clean-data objective and a lightweight local continuity module (LCM) to generate globally coherent structures without grid artifacts. In the second stage, the detail sharpener performs a constrained multi-step rectified-flow refinement within the manifold defined by the core predictor, enhancing fine-grained geometry through noise-free deterministic flow matching. Using only 59K training samples, less than 1% of existing large-scale datasets, Lotus-2 establishes new state-of-the-art results in monocular depth estimation and highly competitive surface normal prediction. These results demonstrate that diffusion models can serve as deterministic world priors, enabling high-quality geometric reasoning beyond traditional discriminative and generative paradigms.

Reliable trajectory prediction from an ego-centric perspective is crucial for robotic navigation in human-centric environments. However, existing methods typically assume noiseless observation histories, failing to account for the perceptual artifacts inherent in first-person vision, such as occlusions, ID switches, and tracking drift. This discrepancy between training assumptions and deployment reality severely limits model robustness. To bridge this gap, we introduce EgoTraj-Bench, built upon TBD dataset, which is the first real-world benchmark that aligns noisy, first-person visual histories with clean, bird's-eye-view future trajectories, enabling robust learning under realistic perceptual constraints. Building on this benchmark, we propose BiFlow, a dual-stream flow matching model that concurrently denoises historical observations and forecasts future motion. To better model agent intent, BiFlow incorporates our EgoAnchor mechanism, which conditions the prediction decoder on distilled historical features via feature modulation. Extensive experiments show that BiFlow achieves state-of-the-art performance, reducing minADE and minFDE by 10-15% on average and demonstrating superior robustness. We anticipate that our benchmark and model will provide a critical foundation for robust real-world ego-centric trajectory prediction. The benchmark library is available at: https://github.com/zoeyliu1999/EgoTraj-Bench.

Just-in-Time software defect prediction (JIT-SDP) plays a critical role in prioritizing risky code changes during code review and continuous integration. However, existing datasets often suffer from noisy labels and low precision in identifying bug-inducing commits. To address this, we present ReDef (Revert-based Defect dataset), a high-confidence benchmark of function-level modifications curated from 22 large-scale C/C++ projects. Defective cases are anchored by revert commits, while clean cases are validated through post-hoc history checks. Ambiguous instances are conservatively filtered out via a GPT-assisted triage process involving multiple votes and audits. This pipeline yields 3,164 defective and 10,268 clean modifications, offering substantially more reliable labels than prior resources. Beyond dataset construction, we provide a systematic evaluation of how Code Language Models (CLMs)-specifically CodeBERT, CodeT5+, UniXcoder, and Qwen2.5-reason about code modifications. We first investigate which input encodings most effectively expose change information under five different strategies. We then design four counterfactual perturbation strategies (e.g., swapping added/deleted blocks, inverting diff polarity) to serve as diagnostic probes. We posit that if models genuinely capture change semantics, such distortions should lead to a clear decline in predictive performance. Our results show that compact diff-style encodings consistently outperform whole-function formats across all CLMs, supported by rigorous statistical confirmation. However, under counterfactual tests, performance remains effectively stable, revealing that what appears to be robustness in fact reflects a reliance on superficial cues rather than true semantic understanding.

Modern machine learning (ML) systems demand substantial training data, often resorting to external sources. Nevertheless, this practice renders them vulnerable to backdoor poisoning attacks. Prior backdoor defense strategies have primarily focused on the identification of backdoored models or poisoned data characteristics, typically operating under the assumption of access to clean data. In this work, we delve into a relatively underexplored challenge: the automatic identification of backdoor data within a poisoned dataset, all under realistic conditions, i.e., without the need for additional clean data or without manually defining a threshold for backdoor detection. We draw an inspiration from the scaled prediction consistency (SPC) technique, which exploits the prediction invariance of poisoned data to an input scaling factor. Based on this, we pose the backdoor data identification problem as a hierarchical data splitting optimization problem, leveraging a novel SPC-based loss function as the primary optimization objective. Our innovation unfolds in several key aspects. First, we revisit the vanilla SPC method, unveiling its limitations in addressing the proposed backdoor identification problem. Subsequently, we develop a bi-level optimization-based approach to precisely identify backdoor data by minimizing the advanced SPC loss. Finally, we demonstrate the efficacy of our proposal against a spectrum of backdoor attacks, encompassing basic label-corrupted attacks as well as more sophisticated clean-label attacks, evaluated across various benchmark datasets. Experiment results show that our approach often surpasses the performance of current baselines in identifying backdoor data points, resulting in about 4%-36% improvement in average AUROC. Codes are available at https://github.com/OPTML-Group/BackdoorMSPC.

An effective visual tokenizer must preserve image fidelity while producing latents that downstream diffusion models can learn efficiently. Prior work improves latent diffusability through semantic alignment or joint tokenizer--diffusion training. Revisiting REPA-E, a representative approach, we find that removing its diffusion objective and dedicated generative blocks while retaining semantic prediction from corrupted latents yields comparable downstream generation performance under a matched setting. This observation motivates a general principle of robust prediction: generation-relevant information should remain recoverable from corrupted latents. We instantiate this principle with two complementary objectives. RobustAlign predicts pretrained semantic features from corrupted latents to preserve high-level structure, while RobustRecon reconstructs the clean image to retain fine-grained spatial and appearance information. Together, they form Robust Alignment and Reconstruction VAE (RoAR-VAE). Our analysis suggests that robust prediction improves diffusability by making useful information more accessible in high-variance latent directions, which diffusion models tend to learn earlier. Empirically, RoAR-VAE improves average generation benchmark performance by 2.19 points over the strongest baseline tokenizer under the same training budget, while improving small-text reconstruction accuracy by 16.93 percentage points over FLUX.1-VAE. These results demonstrate that RoAR-VAE achieves a favorable balance between reconstruction fidelity and downstream generative learnability.

Practically all large language models have been pre-trained on data that is subject to global uncertainty related to copyright infringement and breach of contract. This creates potential risk for users and developers due to this uncertain legal status. The KL3M Data Project directly confronts this critical issue by introducing the largest comprehensive training data pipeline that minimizes risks related to copyright or breach of contract. The foundation of this project is a corpus of over 132 million documents and trillions of tokens spanning 16 different sources that have been verified to meet the strict copyright and licensing protocol detailed herein. We are releasing the entire pipeline, including 1) the source code to acquire and process these documents, 2) the original document formats with associated provenance and metadata, 3) extracted content in a standardized format, 4) pre-tokenized representations of the documents, and 5) various mid- and post-train resources such as question-answer, summarization, conversion, drafting, classification, prediction, and conversational data. All of these resources are freely available to the public on S3, Hugging Face, and GitHub under CC-BY terms. We are committed to continuing this project in furtherance of a more ethical, legal, and sustainable approach to the development and use of AI models.

Autoregressive video generation has emerged as a powerful paradigm for World Action Models (WAMs). However, existing approaches suffer from slow training convergence and limited converged accuracy, particularly at high frame rates, as the training supervision is confined to the current chunk without explicit signals about future dynamics; they also suffer from slow inference due to iterative video denoising. In this paper, we present Next Forcing, a multi-chunk prediction (MCP) framework for causal world modeling that enables faster training, higher accuracy, and accelerated inference. Inspired by multi-token prediction in large language models, Next Forcing introduces an MCP training objective that augments the main model with lightweight auxiliary MCP modules to simultaneously denoise video chunks at multiple future temporal horizons (next^1, next^2, next^3 chunks). These MCP modules form a causal chain across prediction depths, where intermediate features fused from multiple layers of the main model are leveraged to predict future dynamics, allowing near-future predictions to inform farther-future ones and providing dense multi-scale temporal supervision back to the main model. During training, the MCP modules significantly accelerate convergence and improve converged accuracy, especially at high frame rates: at 50 fps, Next Forcing achieves a 93.1% relative improvement over LingBot-VA at 5k training steps and 2.3x faster convergence, and establishes new state-of-the-art results on the RoboTwin benchmark (94.1/93.5% on Clean/Random). At inference, the MCP modules can be retained to predict the next video chunk in parallel with the current one, achieving 2x inference acceleration. Next Forcing also demonstrates significant improvements on PhyWorld, a benchmark evaluating adherence to physical laws in video generation, and over 50% FVD reduction on general video pretraining.

The development of materials science is undergoing a shift from empirical approaches to data-driven and algorithm-oriented research paradigm. The state-of-the-art platforms are confined to inorganic crystals, with limited chemical space, sparse experimental data and a lack of integrated online computation for rapid validation. Here, we introduce the Clean Energy Materials Platform (CEMP), an open-access platform that integrates high-throughput computing workflows, multi-scale machine learning (ML) models and a comprehensive materials database tailored for clean energy applications. A key feature of CEMP is the online calculation module, which enables fully automatic quantum and molecular dynamics simulations via structured table uploads. CEMP harmonizes heterogeneous data from experimental measurements, theoretical calculation and AI-based predictions for four material classes, including small molecules, polymers, ionic liquids, and crystals. The platform hosts ~ 376,000 entries, including ~6,000 experimental records, ~50,000 quantum-chemical calculations and ~320,000 AI-predicted properties. The database covers 12 critical properties and the corresponding ML models demonstrate robust predictive power with R2 ranging from 0.64 to 0.94, thus ensures rapid material screening, structure-property relationship analysis and multi-objective optimization for clean energy applications. CEMP aims to establish a digital ecosystem for clean energy materials, enabling a closed-loop workflow from data acquisition to material discovery and real-time online validation.

Flow matching with x-prediction -- regressing the clean data point rather than the ambient velocity -- is known to exploit low-dimensional manifold structure effectively in pixel space li2025back. We ask whether a pretrained representation space, while containing a low-dimensional data manifold of comparable intrinsic dimensionality, offers a distribution more favorable for flow-matching learning. Comparing pixel, SD-VAE, and DINOv2 features along four geometric axes, we find that pixel and DINOv2 share nearly identical intrinsic dimensionalities (both d!approx!33) yet DINOv2 exhibits 7.3times higher effective rank, 35times better covariance conditioning, 11.5times lower excess kurtosis, and 1.7times lower on-manifold interpolation error; SD-VAE latents are consistently intermediate, indicating that the advantage stems from representation-learning objectives rather than mere compression. These statistical properties render the flow-matching regression well-conditioned and remove the need for the specialized prediction heads or Riemannian transport used by prior DINOv2 diffusion methods. We propose the Representation Image Transformer (RiT): a vanilla Diffusion Transformer trained by x-prediction on frozen DINOv2 features, augmented only by a dimension-aware noise schedule and joint [CLS]-patch modeling. On ImageNet 256{times}256, RiT attains FID 1.45 without guidance and 1.14 with classifier-free guidance, outperforming DiT^DH-XL with 19% fewer parameters (676M vs.\ 839M). The resulting ODE is efficiently solvable at coarse discretizations: with classifier-free guidance, 5 Heun steps already reach FID 2.0 and 10 steps reach 1.25, without distillation or consistency training. Code at https://github.com/lezhang7/RiT.

Representation Autoencoders (RAEs) enable diffusion models to operate in the feature spaces of pretrained visual encoders. However, many off-the-shelf encoders are not optimized for faithful reconstruction, discarding fine-grained visual details. As expected, finetuning these encoders for image reconstruction recovers such details. However, perhaps counterintuitively, this procedure reduces the effective dimensionality of the resulting representation, and the altered geometry has downstream effects on generation. Specifically, we show that using the standard velocity prediction in flow matching in this high-dimensional space requires the model to fit orthogonal noise directions outside the low-dimensional signal manifold, making optimization inefficient. This motivates using the clean data parameterization (x_{0}-prediction) instead, which focuses learning on the underlying signal manifold. Across experiments with multiple strong-reconstruction encoders, we show that x_{0}-prediction consistently improves text-to-image generation performance.

Deep Neural Networks (DNNs) have achieved excellent performance in various fields. However, DNNs' vulnerability to Adversarial Examples (AE) hinders their deployments to safety-critical applications. This paper presents a novel AE detection framework, named BEYOND, for trustworthy predictions. BEYOND performs the detection by distinguishing the AE's abnormal relation with its augmented versions, i.e. neighbors, from two prospects: representation similarity and label consistency. An off-the-shelf Self-Supervised Learning (SSL) model is used to extract the representation and predict the label for its highly informative representation capacity compared to supervised learning models. For clean samples, their representations and predictions are closely consistent with their neighbors, whereas those of AEs differ greatly. Furthermore, we explain this observation and show that by leveraging this discrepancy BEYOND can effectively detect AEs. We develop a rigorous justification for the effectiveness of BEYOND. Furthermore, as a plug-and-play model, BEYOND can easily cooperate with the Adversarial Trained Classifier (ATC), achieving the state-of-the-art (SOTA) robustness accuracy. Experimental results show that BEYOND outperforms baselines by a large margin, especially under adaptive attacks. Empowered by the robust relation net built on SSL, we found that BEYOND outperforms baselines in terms of both detection ability and speed. Our code will be publicly available.

This paper proposes a generative speech enhancement model based on Schr\"odinger bridge (SB). The proposed model is employing a tractable SB to formulate a data-to-data process between the clean speech distribution and the observed noisy speech distribution. The model is trained with a data prediction loss, aiming to recover the complex-valued clean speech coefficients, and an auxiliary time-domain loss is used to improve training of the model. The effectiveness of the proposed SB-based model is evaluated in two different speech enhancement tasks: speech denoising and speech dereverberation. The experimental results demonstrate that the proposed SB-based outperforms diffusion-based models in terms of speech quality metrics and ASR performance, e.g., resulting in relative word error rate reduction of 20% for denoising and 6% for dereverberation compared to the best baseline model. The proposed model also demonstrates improved efficiency, achieving better quality than the baselines for the same number of sampling steps and with a reduced computational cost.

Adversarial robustness often comes at the cost of degraded accuracy, impeding the real-life application of robust classification models. Training-based solutions for better trade-offs are limited by incompatibilities with already-trained high-performance large models, necessitating the exploration of training-free ensemble approaches. Observing that robust models are more confident in correct predictions than in incorrect ones on clean and adversarial data alike, we speculate amplifying this "benign confidence property" can reconcile accuracy and robustness in an ensemble setting. To achieve so, we propose "MixedNUTS", a training-free method where the output logits of a robust classifier and a standard non-robust classifier are processed by nonlinear transformations with only three parameters, which are optimized through an efficient algorithm. MixedNUTS then converts the transformed logits into probabilities and mixes them as the overall output. On CIFAR-10, CIFAR-100, and ImageNet datasets, experimental results with custom strong adaptive attacks demonstrate MixedNUTS's vastly improved accuracy and near-SOTA robustness -- it boosts CIFAR-100 clean accuracy by 7.86 points, sacrificing merely 0.87 points in robust accuracy.

Few-step streaming audio--video generation requires both causal modeling and step distillation, yet standard training recipes face two context-related challenges. Teacher forcing pairs clean history with a noisy target, but supervises predictive contextual representations only indirectly through velocity prediction. Meanwhile, directly reusing bidirectional score models in causal Distribution Matching Distillation (DMD) creates a mismatch between generation and scoring contexts. We address these challenges with Salt++, a two-stage post-training framework comprising Causal Self-Flow (CSF) and context-aligned autoregressive DMD. CSF exploits contextual information asymmetry by varying the history while keeping the noisy target fixed: a noise-mixed-history student aligns its intermediate representations with those of a clean-history exponential-moving-average teacher. This self-supervised signal encourages the student to extract semantic information and improves cross-modal alignment. Context-aligned AR DMD shares the causal mask and prefix across generator sampling, fake-score training, and real-score evaluation to match generated and reference distributions under a block-conditional KL objective. With calibrated teacher guidance, it performs clean-prefix few-step distillation and then adapts to generated histories without switching objectives or requiring separate consistency distillation. At 480p, Salt++ improves visual and motion quality by 57% and 45% over OmniForcing on JavisBench under the same 4-step causal setting. A separate scale-wise post-training stage extends Salt++ to 4-step 1664times960 generation, outperforming bidirectional LTX-2 on six of seven reported metrics. Project page: https://xingtongge.github.io/Saltpp

Real-world datasets collected from sensors or human inputs are prone to noise and errors, posing significant challenges for applying offline reinforcement learning (RL). While existing methods have made progress in addressing corrupted actions and rewards, they remain insufficient for handling corruption in high-dimensional state spaces and for cases where multiple elements in the dataset are corrupted simultaneously. Diffusion models, known for their strong denoising capabilities, offer a promising direction for this problem-but their tendency to overfit noisy samples limits their direct applicability. To overcome this, we propose Ambient Diffusion-Guided Dataset Recovery (ADG), a novel approach that pioneers the use of diffusion models to tackle data corruption in offline RL. First, we introduce Ambient Denoising Diffusion Probabilistic Models (DDPM) from approximated distributions, which enable learning on partially corrupted datasets with theoretical guarantees. Second, we use the noise-prediction property of Ambient DDPM to distinguish between clean and corrupted data, and then use the clean subset to train a standard DDPM. Third, we employ the trained standard DDPM to refine the previously identified corrupted data, enhancing data quality for subsequent offline RL training. A notable strength of ADG is its versatility-it can be seamlessly integrated with any offline RL algorithm. Experiments on a range of benchmarks, including MuJoCo, Kitchen, and Adroit, demonstrate that ADG effectively mitigates the impact of corrupted data and improves the robustness of offline RL under various noise settings, achieving state-of-the-art results.

While diffusion models excel in video restoration, their reliance on extensive iterative steps limits efficiency. Conversely, aggressive single-step distillation often compromises fine texture recovery. To achieve an optimal balance, we present SATB-VR, a few-step paradigm that jump-starts the denoising process via an auxiliary predictor, explicitly bypassing early low signal-to-noise ratio (SNR) steps. However, naive joint training of the predictor and the denoiser inherently introduces a severe train-inference discrepancy. To resolve this, we propose the SNR-Aware Trajectory Blending (SATB) strategy. During the forward process, SATB constructs the noisy input by dynamically blending the predictor's output with the ground-truth trajectory based on the SNRs. This forces the denoiser to robustly compensate for initial prediction errors while smoothly converging to the clean data manifold. Furthermore, we introduce a Denoiser-Driven Consistency (DDC) loss, leveraging the concurrently updated denoiser as a dynamic evaluator to explicitly align internal features and boost predictor accuracy. Extensive experiments demonstrate that, under flexible few-step inference regimes (\eg, le 5 steps), SATB-VR performs favorably against existing approaches on synthetic, real-world, and AIGC benchmarks.

Semantic information refers to the meaning conveyed through words, phrases, and contextual relationships within a given linguistic structure. Humans can leverage semantic information, such as familiar linguistic patterns and contextual cues, to reconstruct incomplete or masked speech signals in noisy environments. However, existing speech enhancement (SE) approaches often overlook the rich semantic information embedded in speech, which is crucial for improving intelligibility, speaker consistency, and overall quality of enhanced speech signals. To enrich the SE model with semantic information, we employ language models as an efficient semantic learner and propose a comprehensive framework tailored for language model-based speech enhancement, called GenSE. Specifically, we approach SE as a conditional language modeling task rather than a continuous signal regression problem defined in existing works. This is achieved by tokenizing speech signals into semantic tokens using a pre-trained self-supervised model and into acoustic tokens using a custom-designed single-quantizer neural codec model. To improve the stability of language model predictions, we propose a hierarchical modeling method that decouples the generation of clean semantic tokens and clean acoustic tokens into two distinct stages. Moreover, we introduce a token chain prompting mechanism during the acoustic token generation stage to ensure timbre consistency throughout the speech enhancement process. Experimental results on benchmark datasets demonstrate that our proposed approach outperforms state-of-the-art SE systems in terms of speech quality and generalization capability.

This paper describes our NPU-ASLP system for the Audio-Visual Diarization and Recognition (AVDR) task in the Multi-modal Information based Speech Processing (MISP) 2022 Challenge. Specifically, the weighted prediction error (WPE) and guided source separation (GSS) techniques are used to reduce reverberation and generate clean signals for each single speaker first. Then, we explore the effectiveness of Branchformer and E-Branchformer based ASR systems. To better make use of the visual modality, a cross-attention based multi-modal fusion module is proposed, which explicitly learns the contextual relationship between different modalities. Experiments show that our system achieves a concatenated minimum-permutation character error rate (cpCER) of 28.13\% and 31.21\% on the Dev and Eval set, and obtains second place in the challenge.

Large language models route every input through a learned embedding table of shape |V| x d_model, consuming hundreds of millions to billions of trainable parameters at frontier scale. We introduce Kronecker Embeddings, a deterministic byte-level character-position factorization that replaces this table with a fixed encoder and a single learned projection, compatible with standard BPE tokenizers, eliminating 91--94% of input-side trainable parameters at frontier scale. We provide five contributions. First, a cross-model probe across six LMs (135M-671B parameters) shows trained input embeddings cluster typographic variants of the probe word far more than morphological relatives; Kronecker escapes this clustering at the embedding layer. Second, a controlled three-seed comparison on nanoGPT GPT-2 124M over 2.5B tokens of FineWeb-Edu shows Kronecker reaching 2.5 +- 0.2% lower validation loss than the BPE-tied baseline (gap 0.083 +- 0.007 nats, ~9% lower perplexity), needing ~1.43x fewer steps to reach BPE's converged loss. Third, a spelling-robustness probe over 110 clean/typo pairs shows Kronecker preserves the top-1 prediction on 55.5% of pairs vs. 47.3% for BPE (+8.2 pp) and lowers KL by 7.6%, winning or tying in 10 of 11 categories; a generation probe shows Kronecker echoes byte-novel strings and typos through generation where BPE forgets them. Fourth, BPE embedding norm drifts during training while Kronecker projection norm stays near 1.0, consistent with a stable representational target. Fifth, an on-the-fly runtime variant reconstructs embeddings from a 4.5 MB byte buffer rather than a 2.15 GB table at vocabulary 131,072, with 0.01--0.24% step-time overhead. Byte-level locality has a tradeoff: byte-similar but semantically distant pairs (compute/commute, nation/notion) cluster together, shifting disambiguation to early attention layers.

Human-Object Interaction (HOI) detection is crucial for robot-human assistance, enabling context-aware support. However, models trained on clean datasets degrade in real-world conditions due to unforeseen corruptions, leading to inaccurate predictions. To address this, we introduce the first robustness benchmark for HOI detection, evaluating model resilience under diverse challenges. Despite advances, current models struggle with environmental variability, occlusions, and noise. Our benchmark, RoHOI, includes 20 corruption types based on the HICO-DET and V-COCO datasets and a new robustness-focused metric. We systematically analyze existing models in the HOI field, revealing significant performance drops under corruptions. To improve robustness, we propose a Semantic-Aware Masking-based Progressive Learning (SAMPL) strategy to guide the model to be optimized based on holistic and partial cues, thus dynamically adjusting the model's optimization to enhance robust feature learning. Extensive experiments show that our approach outperforms state-of-the-art methods, setting a new standard for robust HOI detection. Benchmarks, datasets, and code are available at https://github.com/KratosWen/RoHOI.

Diffusion models have greatly advanced instruction-guided image editing, while also raising concerns about unauthorized image manipulation. Image immunization addresses this risk by adding imperceptible perturbations to an input image to disrupt subsequent edits. Since editing requests are unknown at image release, protection should remain effective beyond the instruction used to construct the perturbation. Existing immunization methods either require costly full-trajectory backpropagation or use intermediate objectives whose effects may be weakened by subsequent denoising. Meanwhile, a single inference path provides limited feedback about alternative denoising continuations. To address these challenges, we propose SPIN, a framework for image immunization via one-step projection over local stochastic trajectory neighborhoods. Starting from an early denoising state, SPIN generates stochastic neighboring states under the same instruction and predicts their clean latents through one-step projection without full unrolling. We then optimize a bounded input perturbation to maximize the average deviation of these predictions from a clean-edit reference, encouraging the perturbation to disrupt multiple possible editing outcomes. Experiments on two image editors demonstrate substantial gains in protection performance, with SPIN outperforming compared methods across all six metrics under seen instructions and in the more challenging unseen instruction setting.

Deep neural networks (DNNs) are vulnerable to backdoor attack, which does not affect the network's performance on clean data but would manipulate the network behavior once a trigger pattern is added. Existing defense methods have greatly reduced attack success rate, but their prediction accuracy on clean data still lags behind a clean model by a large margin. Inspired by the stealthiness and effectiveness of backdoor attack, we propose a simple but highly effective defense framework which injects non-adversarial backdoors targeting poisoned samples. Following the general steps in backdoor attack, we detect a small set of suspected samples and then apply a poisoning strategy to them. The non-adversarial backdoor, once triggered, suppresses the attacker's backdoor on poisoned data, but has limited influence on clean data. The defense can be carried out during data preprocessing, without any modification to the standard end-to-end training pipeline. We conduct extensive experiments on multiple benchmarks with different architectures and representative attacks. Results demonstrate that our method achieves state-of-the-art defense effectiveness with by far the lowest performance drop on clean data. Considering the surprising defense ability displayed by our framework, we call for more attention to utilizing backdoor for backdoor defense. Code is available at https://github.com/damianliumin/non-adversarial_backdoor.

Training high-quality diffusion models is computationally expensive, and inference-time guidance often adds further sampling cost. In this work, we introduce Swift, a simple yet effective self-guided training method that uses a frozen weak denoiser to improve a stronger model without adding inference overhead. For each noisy input, Swift extrapolates the clean regression target away from the weak denoiser's prediction, amplifying components that remain underfit. The weak guide can be an early training checkpoint, requires no backpropagation during main-model training, and is discarded afterward. The resulting model retains the original sampler and supports both conditional and unconditional generation without label dropout or an unconditional branch. We explain this mechanism through a spectral analysis of finite-time population gradient flow in an RKHS. With an early-stopped weak guide, we prove that a nonempty range of extrapolation strengths yields strictly lower posterior-mean error than matched standard training, despite shifting the regression target away from the posterior mean. Experiments on CIFAR-10 and ImageNet-256 demonstrate improvements across model scales and representations. In one ImageNet-256 configuration, Swift surpasses the baseline's best FID using roughly half the total training compute, including guide preparation and training overhead. On RAEv2, it achieves FID 1.15 without inference-time guidance and 0.99 with guidance. These results establish target extrapolation as an effective approach to weak-to-strong diffusion training with efficient single-model inference.

Instance-level roof-to-footprint offset (RFO) prediction is central to extracting building footprints from off-nadir imagery. Query-based pipelines commonly use high-dimensional instance tokens to predict signed two-dimensional RFOs. We investigate whether RFO prediction can instead use a compact offset token. Under local pinhole projection and vertical-extrusion assumptions, the idealized RFO map admits a five-parameter sufficient descriptor comprising intrinsic shape, composite amplitude, and relative geometry. This factorization provides a structural prior for a five-dimensional offset token, whose channels learn task-relevant latent representations through end-to-end training. Based on this design, we propose LoDEOT, which retains high-dimensional instance tokens for detection and segmentation but maps instance-token, concentration-gated roof, and box-mask evidence to a five-dimensional offset token followed by an independent two-dimensional readout. Known denoising-query target indices further align each supervised decoder-layer estimate with the same clean instance RFO, organizing successive predictions as target-aligned recovery under perturbed query conditions. Experiments on five real-world building datasets demonstrate the effectiveness of LoDEOT for building footprint extraction. Experiments on real-world building datasets demonstrate that a five-dimensional offset token can support accurate RFO prediction. On BONAI, LoDEOT achieves the best roof-detection bAP and bAP50 and leads all five offset-corrected footprint metrics among the evaluated end-to-end methods, with FAP50 of 54.58 and mEPE of 5.23 pixels. Its FAP50 exceeds those of the evaluated end-to-end baselines by 7.56-16.85 percentage points.

Action-conditioned world models (ACWMs) have shown strong promise for video prediction and decision-making. However, existing benchmarks are largely restricted to egocentric navigation or narrow, task-specific robotics datasets, offering only limited coverage of the rich physical interactions required for generalized world understanding. We introduce ACWM-Phys, a new benchmark for evaluating action-conditioned prediction under diverse physical dynamics in a clean, controllable simulation environment with a carefully designed action space. ACWM-Phys contains training and evaluation data spanning rigid-body dynamics, kinematics, deformable-object interactions, and particle dynamics. To evaluate both interpolation and generalization, we design in-distribution and out-of-distribution protocols with controlled shifts in interaction patterns or scene configurations. By building the benchmark in a fully controllable simulator, ACWM-Phys enables precise data collection, reproducible evaluation, and systematic analysis of model capabilities for physically grounded world modeling. Through systematic experiments on ACWM-DiT, we find that OoD generalization depends not only on the physical regime but also on effective task complexity: models generalize well on visually simple, low-dimensional interactions with clear geometric structure, but suffer larger drops on deformable contacts, high-dimensional control, and complex articulated motion. This suggests that the model still relies heavily on visual appearance patterns instead of fully learning the underlying physics. Ablations show that cross-attention improves high-dimensional action conditioning, causal VAEs outperform frame-wise encoders, and larger action spaces are harder to model but can improve generalization by providing richer control signals. These findings guide the design of physically grounded world models.

Occupancy world models use historical occupancy states to forecast future 3D scenes, but their robustness under corrupted temporal inputs remains poorly understood. Existing evaluations primarily emphasize clean forecasting accuracy and provide limited evidence about how errors enter, persist, and propagate through the occupancy perception-forecasting chain. This paper introduces OccStress, a robustness stress-testing benchmark for the occupancy forecasting chain. OccStress contains 21 corruption families with 61 severity configurations and 10,827 strict temporal anchors across 3 datasets. OccStress covers both 3D occupancy perception and 4D occupancy forecasting through two complementary tracks. This design separates model-mediated pipeline errors under standardized sensor stressors from the intrinsic sensitivity of 4D forecasting models to corrupted occupancy states. OccStress further defines temporal injection protocols to test whether errors in the current state, recent history, or earlier history affect future forecasts differently. OccStress provides aggregate metrics for evaluating robustness along the occupancy forecasting chain. Experiments with five 4D forecasters reveal that current occupancy models are substantially affected by both upstream prediction errors and direct state corruptions, and that clean performance alone is an insufficient description of source- and position-specific robustness. Code, data, and evaluation tools are available at https://insailab.org/OccStress.

We introduce a novel invariance for peptide tandem mass spectrometry data, unlocking self-supervised representation learning that improves de novo sequencing of peptides. This invariance exploits the physical relationship between precursor properties (mass and charge) and fragment-ion evidence, without requiring peptide sequence labels. We introduce dIon, which adapts the DINO framework with two latent prediction tasks, both recovering a clean teacher representation: one from a spectrum mixture, using the precursor as a selection query, and one from a partial spectrum with the precursor withheld. The first associates precursor information with fragment-ion evidence; the second prevents representational collapse onto that information alone. Mechanistic probes support both effects, and ablations show that the full objective performs best. Under identical end-to-end training, dIon initialization improves de novo peptide precision over training from scratch by 5.5 and 8.4 percentage points on the held-out MassIVE-KB and Kingdoms test sets, and by 2.3 and 4.8 percentage points with a larger supervised training corpus. The resulting models surpass fully supervised state-of-the-art de novo sequencing models on the diverse, multi-species Kingdoms corpus under the same greedy-decoding protocol. Without peptide labels, dIon learns strong native peptide-similarity geometry compared with other learned models; with limited peptide-supervised adaptation, it achieves the best retrieval and pair-discrimination performance across all representation benchmarks.

We propose Stable Video Infinity (SVI) that is able to generate infinite-length videos with high temporal consistency, plausible scene transitions, and controllable streaming storylines. While existing long-video methods attempt to mitigate accumulated errors via handcrafted anti-drifting (e.g., modified noise scheduler, frame anchoring), they remain limited to single-prompt extrapolation, producing homogeneous scenes with repetitive motions. We identify that the fundamental challenge extends beyond error accumulation to a critical discrepancy between the training assumption (seeing clean data) and the test-time autoregressive reality (conditioning on self-generated, error-prone outputs). To bridge this hypothesis gap, SVI incorporates Error-Recycling Fine-Tuning, a new type of efficient training that recycles the Diffusion Transformer (DiT)'s self-generated errors into supervisory prompts, thereby encouraging DiT to actively identify and correct its own errors. This is achieved by injecting, collecting, and banking errors through closed-loop recycling, autoregressively learning from error-injected feedback. Specifically, we (i) inject historical errors made by DiT to intervene on clean inputs, simulating error-accumulated trajectories in flow matching; (ii) efficiently approximate predictions with one-step bidirectional integration and calculate errors with residuals; (iii) dynamically bank errors into replay memory across discretized timesteps, which are resampled for new input. SVI is able to scale videos from seconds to infinite durations with no additional inference cost, while remaining compatible with diverse conditions (e.g., audio, skeleton, and text streams). We evaluate SVI on three benchmarks, including consistent, creative, and conditional settings, thoroughly verifying its versatility and state-of-the-art role.

The deep learning models used for speaker verification rely heavily on large amounts of data and correct labeling. However, noisy (incorrect) labels often occur, which degrades the performance of the system. In this paper, we propose a novel two-stage learning method to filter out noisy labels from speaker datasets. Since a DNN will first fit data with clean labels, we first train the model with all data for several epochs. Then, based on this model, the model predictions are compared with the labels using our proposed the OR-Gate with top-k mechanism to select the data with clean labels and the selected data is used to train the model. This process is iterated until the training is completed. We have demonstrated the effectiveness of this method in filtering noisy labels through extensive experiments and have achieved excellent performance on the VoxCeleb (1 and 2) with different added noise rates.

GPT has shown its remarkable success in natural language processing. However, the language sequence is not sufficient to describe spatial-temporal details in the visual world. Alternatively, the video sequence is good at capturing such details. Motivated by this fact, we propose a concise Video-GPT in this paper by treating video as new language for visual world modeling. By analogy to next token prediction in GPT, we introduce a novel next clip diffusion paradigm for pretraining Video-GPT. Different from the previous works, this distinct paradigm allows Video-GPT to tackle both short-term generation and long-term prediction, by autoregressively denoising the noisy clip according to the clean clips in the history. Extensive experiments show our Video-GPT achieves the state-of-the-art performance on video prediction, which is the key factor towards world modeling (Physics-IQ Benchmark: Video-GPT 34.97 vs. Kling 23.64 vs. Wan 20.89). Moreover, it can be well adapted on 6 mainstream video tasks in both video generation and understanding, showing its great generalization capacity in downstream. The project page is at https://Video-GPT.github.io.

Virtual Try-On (VTON) is the task of synthesizing an image of a person wearing a target garment, conditioned on a person image and a garment image. While diffusion-based VTON models featuring a Dual UNet architecture demonstrate superior fidelity compared to single UNet models, they incur substantial computational and memory overhead due to their heavy structure. In this study, through visualization analysis and theoretical analysis, we derived three hypotheses regarding the learning of context features to condition the denoising process. Based on these hypotheses, we developed Re-CatVTON, an efficient single UNet model that achieves high performance. We further enhance the model by introducing a modified classifier-free guidance strategy tailored for VTON's spatial concatenation conditioning, and by directly injecting the ground-truth garment latent derived from the clean garment latent to prevent the accumulation of prediction error. The proposed Re-CatVTON significantly improves performance compared to its predecessor (CatVTON) and requires less computation and memory than the high-performance Dual UNet model, Leffa. Our results demonstrate improved FID, KID, and LPIPS scores, with only a marginal decrease in SSIM, establishing a new efficiency-performance trade-off for single UNet VTON models.

General-purpose agents such as OpenClaw are increasingly used as autonomous tool users, but their coding ability is difficult to measure under SWE-bench: a generic agent does not by itself satisfy the clean Docker workspace, patch, and prediction contract required for scoring. We introduce Claw-SWE-Bench, a multilingual SWE-bench-style benchmark and adapter protocol that makes heterogeneous agent harnesses, or claws, comparable under fair settings including a fixed prompt, runtime budget, workspace contract, patch extraction procedure, and evaluator. The full benchmark contains 350 GitHub issue-resolution instances across 8 languages and 43 repositories, drawn from SWE-bench-Multilingual and SWE-bench-Verified-Mini after future-commit cleanup. We also release Claw-SWE-Bench Lite for faster validation, which is an 80-instance subset selected by a cost-aware, rank-aware procedure over 17 calibration columns. On the full benchmark, OpenClaw with a minimal direct-diff adapter scores only 19.1% Pass@1, whereas the full adapter reaches 73.4% with the same GLM 5.1 backbone, showing that adapter design is essential for enabling OpenClaw-style harnesses to perform coding tasks effectively. Across an OpenClaw times nine-model sweep and a five-claw times two-model sweep, model choice changes Pass@1 by 29.4 pp and harness choice by 27.4 pp under fixed models; systems with similar accuracy can differ substantially in total API cost. Claw-SWE-Bench therefore treats harness and cost accounting as first-class axes of SWE-style coding-agent evaluation, providing both a full benchmark and a low-cost reference set for reproducible comparison. The data is available at https://github.com/opensquilla/claw-swe-bench and https://huggingface.co/datasets/TokenRhythm/Claw-SWE-Bench.

Large audio-language models (LALMs) are sensitive to input perturbations, such as noise, waveform corruption, and adversarial injections. We propose AnchorPrompt, an efficient adaptation method that keeps the model frozen and learns a single block of prompt vectors inserted at the decoder input, between the audio and question embeddings. We train these vectors through self-distillation over diverse audio and text perturbations. To improve answer consistency and mitigate hallucination, we use the model's prediction on the clean recording as the target for answerable inputs, and assign a refusal target when the audio lacks sufficient evidence to answer. Furthermore, AnchorPrompt is perturbation-agnostic at inference, requiring no prior detection of perturbations and enabling zero-shot transfer to unseen distortions. We evaluate three LALMs across three benchmarks and show that AnchorPrompt improves answer consistency in most tested conditions. Clean accuracy improves in six of nine model-benchmark pairs, with minimal impact on the remainder of 1.2% at most. Crucially, AnchorPrompt reduces hallucinations under severe audio corruption while keeping false refusals on clean audio rare. Finally, these consistency gains transfer to unseen perturbations, such as choice permutations and reverberation.

This paper describes a machine learning method to automate reading of cockpit gauges, using a CNN to invert affine transformations and deduce aircraft states from instrument images. Validated with synthetic images of a turn-and-bank indicator, this research introduces methods such as generating datasets from a single image, the 'Clean Training Principle' for optimal noise-free training, and CNN interpolation for continuous value predictions from categorical data. It also offers insights into hyperparameter optimization and ML system software engineering.

Generative models trained on extensive high-quality datasets effectively capture the structural and statistical properties of clean images, rendering them powerful priors for transforming degraded features into clean ones in image restoration. VAR, a novel image generative paradigm, surpasses diffusion models in generation quality by applying a next-scale prediction approach. It progressively captures both global structures and fine-grained details through the autoregressive process, consistent with the multi-scale restoration principle widely acknowledged in the restoration community. Furthermore, we observe that during the image reconstruction process utilizing VAR, scale predictions automatically modulate the input, facilitating the alignment of representations at subsequent scales with the distribution of clean images. To harness VAR's adaptive distribution alignment capability in image restoration tasks, we formulate the multi-scale latent representations within VAR as the restoration prior, thus advancing our delicately designed VarFormer framework. The strategic application of these priors enables our VarFormer to achieve remarkable generalization on unseen tasks while also reducing training computational costs. Extensive experiments underscores that our VarFormer outperforms existing multi-task image restoration methods across various restoration tasks.

We present DMax, a new paradigm for efficient diffusion language models (dLLMs). It mitigates error accumulation in parallel decoding, enabling aggressive decoding parallelism while preserving generation quality. Unlike conventional masked dLLMs that decode through a binary mask-to-token transition, DMax reformulates decoding as a progressive self-refinement from mask embeddings to token embeddings. At the core of our approach is On-Policy Uniform Training, a novel training strategy that efficiently unifies masked and uniform dLLMs, equipping the model to recover clean tokens from both masked inputs and its own erroneous predictions. Building on this foundation, we further propose Soft Parallel Decoding. We represent each intermediate decoding state as an interpolation between the predicted token embedding and the mask embedding, enabling iterative self-revising in embedding space. Extensive experiments across a variety of benchmarks demonstrate the effectiveness of DMax. Compared with the original LLaDA-2.0-mini, our method improves TPF on GSM8K from 2.04 to 5.47 while preserving accuracy. On MBPP, it increases TPF from 2.71 to 5.86 while maintaining comparable performance. On two H200 GPUs, our model achieves an average of 1,338 TPS at batch size 1. Code is available at: https://github.com/czg1225/DMax

Multimodal large language models (MLLMs) make grounded predictions in real-world scenes by combining visual and textual cues, yet existing benchmarks rarely reveal how they arbitrate between these evidence sources when they conflict. We introduce SIGNPOST-Bench, a controlled counterfactual benchmark for evaluating text-vision conflict resolution. Each source image is transformed into a counterfactual quintuplet of Original, Blank, Similar, Random, and Adversarial variants. Synthetic, localized scene-text interventions are designed to preserve non-textual content, enabling paired measurements of changes in localization performance and directed shifts toward geographic targets introduced by conflicting text. SIGNPOST-Bench contains 5,111 counterfactual groups and 25,555 image variants from four datasets. We evaluate 20 MLLMs from seven providers. Compared with Original images, Adversarial variants raise median localization error from 282 km to 1,347 km, a 4.8-fold increase. Among geocodable adversarial samples, 6.5-20.1% of predictions lie less than 50 km from the injected target across models, and every evaluated model exhibits a positive mean paired reduction in target distance from Blank to Adversarial. Compatible, unrelated, and conflicting text replacements produce distinct effects on model predictions, while clean-input localization performance does not fully predict robustness to conflicting text. These results establish visual geolocation as a continuous diagnostic of scene-text arbitration and provide a controlled framework for evaluating how MLLMs resolve conflicting multimodal evidence.

Frame-wise action-controlled image-to-video generation is a promising paradigm for interactive world simulation, where each control signal should elicit an immediate visual response. However, maintaining visual fidelity and 3D consistency over long autoregressive rollouts remains challenging. Existing 3D-aware methods often suffer from catastrophic drift due to two impediments: information loss from Latent--RGB Cycling, where generated latents are repeatedly decoded to RGB and re-encoded for future conditioning, and the training--inference gap induced by the error-free hypothesis, where clean training memory fails to match prediction-corrupted inference memory. To address these challenges, we present Robust Dreamer, a memory-augmented framework built around how to design 3D memory and how to use it robustly. First, we introduce Latent Gaussian Memory, which anchors diffusion latents inherited from the generation process to Gaussian primitives and recalls them via latent-space Gaussian splatting. This provides dense, geometry-aware, view-aligned conditioning while avoiding accumulated degradation from repeated VAE conversion. Second, we propose Deviation Learning with Dynamic Deviation Archive, which synthesizes rollout-induced latent deviations through a one-step approximation, stores them by autoregressive stage and denoising timestamp, and injects them into historical memory during training. This exposes the generator to realistic corrupted memory states and teaches internal correction before inference. Experiments on ScanNet, DL3DV, and OmniWorldGame demonstrate state-of-the-art long-horizon performance.

In this work, we present CleanUNet, a causal speech denoising model on the raw waveform. The proposed model is based on an encoder-decoder architecture combined with several self-attention blocks to refine its bottleneck representations, which is crucial to obtain good results. The model is optimized through a set of losses defined over both waveform and multi-resolution spectrograms. The proposed method outperforms the state-of-the-art models in terms of denoised speech quality from various objective and subjective evaluation metrics. We release our code and models at https://github.com/nvidia/cleanunet.

Predicting a football match before kickoff requires more than knowing past results: a model must use changing information and make a clear prediction before the answer is available. We present WorldCupArena, a dynamic benchmark for language models and deep-research agents. The 2026 FIFA World Cup is its first evaluation, and the same process can be reused for future leagues and cups. Before each match, a model either receives a common evidence package or searches for information itself. It predicts the result and score, likely players and events, match statistics, and the outcome of the competition. After the match, these predictions are compared with the recorded result. We report result accuracy, exact-score accuracy, and a scoreline score that gives some credit when a predicted score is close but not exact, together with scores for the other prediction tasks. Across 104 matches and 13 systems, models with similar result accuracy differ more clearly on detailed predictions. Compared with betting-market and human-fan baselines, the best system shows only small gains in result and exact-score accuracy, but a clearer gain in Scoreline. New schedules can be added as they begin, allowing the benchmark to evaluate future models without using outcomes that are already known. Code, prompts, predictions, and evaluation scripts are open sourced at https://github.com/wzk1015/WorldCupArena.

Today's denoising diffusion models do not "denoise" in the classical sense, i.e., they do not directly predict clean images. Rather, the neural networks predict noise or a noised quantity. In this paper, we suggest that predicting clean data and predicting noised quantities are fundamentally different. According to the manifold assumption, natural data should lie on a low-dimensional manifold, whereas noised quantities do not. With this assumption, we advocate for models that directly predict clean data, which allows apparently under-capacity networks to operate effectively in very high-dimensional spaces. We show that simple, large-patch Transformers on pixels can be strong generative models: using no tokenizer, no pre-training, and no extra loss. Our approach is conceptually nothing more than "Just image Transformers", or JiT, as we call it. We report competitive results using JiT with large patch sizes of 16 and 32 on ImageNet at resolutions of 256 and 512, where predicting high-dimensional noised quantities can fail catastrophically. With our networks mapping back to the basics of the manifold, our research goes back to basics and pursues a self-contained paradigm for Transformer-based diffusion on raw natural data.

The overarching objective of this paper is two-fold. First, to explore model-based approaches to characterize the primary cause of the noise. in the RE dataset TACRED Second, to identify the potentially noisy instances. Towards the first objective, we analyze predictions and performance of state-of-the-art (SOTA) models to identify the root cause of noise in the dataset. Our analysis of TACRED shows that the majority of the noise in the dataset originates from the instances labeled as no-relation which are negative examples. For the second objective, we explore two nearest-neighbor-based strategies to automatically identify potentially noisy examples for elimination and reannotation. Our first strategy, referred to as Intrinsic Strategy (IS), is based on the assumption that positive examples are clean. Thus, we have used false-negative predictions to identify noisy negative examples. Whereas, our second approach, referred to as Extrinsic Strategy, is based on using a clean subset of the dataset to identify potentially noisy negative examples. Finally, we retrained the SOTA models on the eliminated and reannotated dataset. Our empirical results based on two SOTA models trained on TACRED-E following the IS show an average 4% F1-score improvement, whereas reannotation (TACRED-R) does not improve the original results. However, following ES, SOTA models show the average F1-score improvement of 3.8% and 4.4% when trained on respective eliminated (TACRED-EN) and reannotated (TACRED-RN) datasets respectively. We further extended the ES for cleaning positive examples as well, which resulted in an average performance improvement of 5.8% and 5.6% for the eliminated (TACRED-ENP) and reannotated (TACRED-RNP) datasets respectively.

Robust machine learning depends on clean data, yet current image data cleaning benchmarks rely on synthetic noise or narrow human studies, limiting comparison and real-world relevance. We introduce CleanPatrick, the first large-scale benchmark for data cleaning in the image domain, built upon the publicly available Fitzpatrick17k dermatology dataset. We collect 496,377 binary annotations from 933 medical crowd workers, identify off-topic samples (4%), near-duplicates (21%), and label errors (22%), and employ an aggregation model inspired by item-response theory followed by expert review to derive high-quality ground truth. CleanPatrick formalizes issue detection as a ranking task and adopts typical ranking metrics mirroring real audit workflows. Benchmarking classical anomaly detectors, perceptual hashing, SSIM, Confident Learning, NoiseRank, and SelfClean, we find that, on CleanPatrick, self-supervised representations excel at near-duplicate detection, classical methods achieve competitive off-topic detection under constrained review budgets, and label-error detection remains an open challenge for fine-grained medical classification. By releasing both the dataset and the evaluation framework, CleanPatrick enables a systematic comparison of image-cleaning strategies and paves the way for more reliable data-centric artificial intelligence.

We present a straightforward statistical test to detect certain violations of the assumption that the data are Independent and Identically Distributed (IID). The specific form of violation considered is common across real-world applications: whether the examples are ordered in the dataset such that almost adjacent examples tend to have more similar feature values (e.g. due to distributional drift, or attractive interactions between datapoints). Based on a k-Nearest Neighbors estimate, our approach can be used to audit any multivariate numeric data as well as other data types (image, text, audio, etc.) that can be numerically represented, perhaps with model embeddings. Compared with existing methods to detect drift or auto-correlation, our approach is both applicable to more types of data and also able to detect a wider variety of IID violations in practice. Code: https://github.com/cleanlab/cleanlab

Cognitive diagnosis (CD) is a fundamental task in intelligent education that profiles learner proficiency over knowledge concepts. In real-world learning platforms, newly added items continually introduce previously unseen concepts, necessitating dynamic expansion of the underlying concept space. Yet existing incremental CD models assume a fixed concept space, allowing gradients from new items to overwrite historical pathways and induce catastrophic forgetting. More critically, these methods rely solely on soft constraints to preserve historical diagnoses. Such constraints may fail to satisfy the requirement of diagnostic invariance after incremental updates, a requirement known as psychometric consistency in cognitive diagnosis. Therefore, we propose CLEAN (Continual Learning with Expandable and Architecturally Isolated Networks), a novel incremental CD framework supporting concept-space expansion while providing structural guarantees for pointwise invariance of historical diagnoses. Specifically, CLEAN first introduces a strict topological bipartition protocol, freezes historical diagnostic functions and applies deterministic orthogonal column masking to sever gradient interference. Second, to accommodate concept expansion, expandable full-rank branches with micro-variance initialization are deployed to learn novel concepts. Finally, to verify that this architectural design achieves invariance by construction, we formalize Representation Drift (RD) to quantify the perturbation of historical traits. Extensive experiments on three large-scale educational datasets demonstrate that CLEAN achieves zero RD, preserving old-item metrics identically to static anchors through architectural isolation while remaining competitive with or superior to strong continual-learning baselines on new items.

Diminishing the impact of false-positive labels is critical for conducting disambiguation in partial label learning. However, the existing disambiguation strategies mainly focus on exploiting the characteristics of individual partial label instances while neglecting the strong supervision information of clean samples randomly lying in the datasets. In this work, we show that clean samples can be collected to offer guidance and enhance the confidence of the most possible candidates. Motivated by the manner of the differentiable count loss strat- egy and the K-Nearest-Neighbor algorithm, we proposed a new calibration strategy called CleanSE. Specifically, we attribute the most reliable candidates with higher significance under the assumption that for each clean sample, if its label is one of the candidates of its nearest neighbor in the representation space, it is more likely to be the ground truth of its neighbor. Moreover, clean samples offer help in characterizing the sample distributions by restricting the label counts of each label to a specific interval. Extensive experiments on 3 synthetic benchmarks and 5 real-world PLL datasets showed this calibration strategy can be applied to most of the state-of-the-art PLL methods as well as enhance their performance.

The quality of generative models depends on the quality of the data they are trained on. Creating large-scale, high-quality datasets is often expensive and sometimes impossible, e.g. in certain scientific applications where there is no access to clean data due to physical or instrumentation constraints. Ambient Diffusion and related frameworks train diffusion models with solely corrupted data (which are usually cheaper to acquire) but ambient models significantly underperform models trained on clean data. We study this phenomenon at scale by training more than 80 models on data with different corruption levels across three datasets ranging from 30,000 to approx 1.3M samples. We show that it is impossible, at these sample sizes, to match the performance of models trained on clean data when only training on noisy data. Yet, a combination of a small set of clean data (e.g.~10% of the total dataset) and a large set of highly noisy data suffices to reach the performance of models trained solely on similar-size datasets of clean data, and in particular to achieve near state-of-the-art performance. We provide theoretical evidence for our findings by developing novel sample complexity bounds for learning from Gaussian Mixtures with heterogeneous variances. Our theoretical model suggests that, for large enough datasets, the effective marginal utility of a noisy sample is exponentially worse than that of a clean sample. Providing a small set of clean samples can significantly reduce the sample size requirements for noisy data, as we also observe in our experiments.

Noise plagues many numerical datasets, where the recorded values in the data may fail to match the true underlying values due to reasons including: erroneous sensors, data entry/processing mistakes, or imperfect human estimates. We consider general regression settings with covariates and a potentially corrupted response whose observed values may contain errors. By accounting for various uncertainties, we introduced veracity scores that distinguish between genuine errors and natural data fluctuations, conditioned on the available covariate information in the dataset. We propose a simple yet efficient filtering procedure for eliminating potential errors, and establish theoretical guarantees for our method. We also contribute a new error detection benchmark involving 5 regression datasets with real-world numerical errors (for which the true values are also known). In this benchmark and additional simulation studies, our method identifies incorrect values with better precision/recall than other approaches.

Recent diffusion-based generative models achieve remarkable results by training on massive datasets, yet this practice raises concerns about memorization and copyright infringement. A proposed remedy is to train exclusively on noisy data with potential copyright issues, ensuring the model never observes original content. However, through the lens of deconvolution theory, we show that although it is theoretically feasible to learn the data distribution from noisy samples, the practical challenge of collecting sufficient samples makes successful learning nearly unattainable. To overcome this limitation, we propose to pretrain the model with a small fraction of clean data to guide the deconvolution process. Combined with our Stochastic Forward--Backward Deconvolution (SFBD) method, we attain FID 6.31 on CIFAR-10 with just 4% clean images (and 3.58 with 10%). We also provide theoretical guarantees that SFBD learns the true data distribution. These results underscore the value of limited clean pretraining, or pretraining on similar datasets. Empirical studies further validate and enrich our findings.

Large Language Models have become the de facto approach to sequence-to-sequence text generation tasks, but for specialized tasks/domains, a pretrained LLM lacks specific capabilities to produce accurate or well-formatted responses. Supervised fine-tuning specializes a LLM by training it on dataset of example prompts with target responses, but real-world data tends to be noisy. While many fine-tuning algorithms exist, here we consider a data-centric AI perspective on LLM fine-tuning, studying how to systematically curate the training dataset to improve the LLM produced via any fine-tuning algorithm. We introduce an automated data curation pipeline CLEAR (Confidence-based LLM Evaluation And Rectification) for instruction tuning datasets, that can be used with any LLM and fine-tuning procedure. CLEAR estimates which training data is low-quality and either filters or corrects it. Automatically identifying which data to filter or correct is done via LLM-derived confidence estimates, to ensure only confident modifications to the dataset. Unlike existing data curation techniques, CLEAR is a comprehensive framework that can improve a dataset (and trained model outputs) without additional fine-tuning computations. We don't assume access to a stronger LLM than the model being fine-tuned (e.g.\ relying on GPT-4 when fine-tuning GPT-3.5), to see whether CLEAR can meaningfully improve the capabilities of any LLM. Experiments reveal that CLEAR consistently improves the performance of fine-tuned models across many datasets and models (like GPT-3.5 and Llama2).

We introduce a boosting algorithm to pre-process data for fairness. Starting from an initial fair but inaccurate distribution, our approach shifts towards better data fitting while still ensuring a minimal fairness guarantee. To do so, it learns the sufficient statistics of an exponential family with boosting-compliant convergence. Importantly, we are able to theoretically prove that the learned distribution will have a representation rate and statistical rate data fairness guarantee. Unlike recent optimization based pre-processing methods, our approach can be easily adapted for continuous domain features. Furthermore, when the weak learners are specified to be decision trees, the sufficient statistics of the learned distribution can be examined to provide clues on sources of (un)fairness. Empirical results are present to display the quality of result on real-world data.

Time series forecasting is an important and forefront task in many real-world applications. However, most of time series forecasting techniques assume that the training data is clean without anomalies. This assumption is unrealistic since the collected time series data can be contaminated in practice. The forecasting model will be inferior if it is directly trained by time series with anomalies. Thus it is essential to develop methods to automatically learn a robust forecasting model from the contaminated data. In this paper, we first statistically define three types of anomalies, then theoretically and experimentally analyze the loss robustness and sample robustness when these anomalies exist. Based on our analyses, we propose a simple and efficient algorithm to learn a robust forecasting model. Extensive experiments show that our method is highly robust and outperforms all existing approaches. The code is available at https://github.com/haochenglouis/RobustTSF.

Large-scale training of modern deep learning models heavily relies on publicly available data on the web. This potentially unauthorized usage of online data leads to concerns regarding data privacy. Recent works aim to make unlearnable data for deep learning models by adding small, specially designed noises to tackle this issue. However, these methods are vulnerable to adversarial training (AT) and/or are computationally heavy. In this work, we propose a novel, model-free, Convolution-based Unlearnable DAtaset (CUDA) generation technique. CUDA is generated using controlled class-wise convolutions with filters that are randomly generated via a private key. CUDA encourages the network to learn the relation between filters and labels rather than informative features for classifying the clean data. We develop some theoretical analysis demonstrating that CUDA can successfully poison Gaussian mixture data by reducing the clean data performance of the optimal Bayes classifier. We also empirically demonstrate the effectiveness of CUDA with various datasets (CIFAR-10, CIFAR-100, ImageNet-100, and Tiny-ImageNet), and architectures (ResNet-18, VGG-16, Wide ResNet-34-10, DenseNet-121, DeIT, EfficientNetV2-S, and MobileNetV2). Our experiments show that CUDA is robust to various data augmentations and training approaches such as smoothing, AT with different budgets, transfer learning, and fine-tuning. For instance, training a ResNet-18 on ImageNet-100 CUDA achieves only 8.96%, 40.08%, and 20.58% clean test accuracies with empirical risk minimization (ERM), L_{infty} AT, and L_{2} AT, respectively. Here, ERM on the clean training data achieves a clean test accuracy of 80.66%. CUDA exhibits unlearnability effect with ERM even when only a fraction of the training dataset is perturbed. Furthermore, we also show that CUDA is robust to adaptive defenses designed specifically to break it.

When selecting data for training large-scale models, standard practice is to filter for examples that match human notions of data quality. Such filtering yields qualitatively clean datapoints that intuitively should improve model behavior. However, in practice the opposite can often happen: we find that selecting according to similarity with "high quality" data sources may not increase (and can even hurt) performance compared to randomly selecting data. To develop better methods for selecting data, we start by framing dataset selection as an optimization problem that we can directly solve for: given target tasks, a learning algorithm, and candidate data, select the subset that maximizes model performance. This framework thus avoids handpicked notions of data quality, and instead models explicitly how the learning process uses train datapoints to predict on the target tasks. Our resulting method greatly improves language model (LM) performance on both pre-specified tasks and previously unseen tasks. Specifically, choosing target tasks representative of standard LM problems and evaluating on diverse held-out benchmarks, our selected datasets provide a 2x compute multiplier over baseline methods.

The lack of clean speech is a practical challenge to the development of speech enhancement systems, which means that there is an inevitable mismatch between their training criterion and evaluation metric. In response to this unfavorable situation, we propose a training and inference strategy that additionally uses enhanced speech as a target by improving the previously proposed noisy-target training (NyTT). Because homogeneity between in-domain noise and extraneous noise is the key to the effectiveness of NyTT, we train various student models by remixing 1) the teacher model's estimated speech and noise for enhanced-target training or 2) raw noisy speech and the teacher model's estimated noise for noisy-target training. Experimental results show that our proposed method outperforms several baselines, especially with the teacher/student inference, where predicted clean speech is derived successively through the teacher and final student models.

Data standardization is a crucial part of the data science life cycle. While tools like Pandas offer robust functionalities, their complexity and the manual effort required for customizing code to diverse column types pose significant challenges. Although large language models (LLMs) like ChatGPT have shown promise in automating this process through natural language understanding and code generation, it still demands expert-level programming knowledge and continuous interaction for prompt refinement. To solve these challenges, our key idea is to propose a Python library with declarative, unified APIs for standardizing different column types, simplifying the LLM's code generation with concise API calls. We first propose Dataprep.Clean, a component of the Dataprep Python Library, significantly reduces the coding complexity by enabling the standardization of specific column types with a single line of code. Then, we introduce the CleanAgent framework integrating Dataprep.Clean and LLM-based agents to automate the data standardization process. With CleanAgent, data scientists only need to provide their requirements once, allowing for a hands-free process. To demonstrate the practical utility of CleanAgent, we developed a user-friendly web application, allowing attendees to interact with it using real-world datasets.

Semi-supervised learning based methods are current SOTA solutions to the noisy-label learning problem, which rely on learning an unsupervised label cleaner first to divide the training samples into a labeled set for clean data and an unlabeled set for noise data. Typically, the cleaner is obtained via fitting a mixture model to the distribution of per-sample training losses. However, the modeling procedure is class agnostic and assumes the loss distributions of clean and noise samples are the same across different classes. Unfortunately, in practice, such an assumption does not always hold due to the varying learning difficulty of different classes, thus leading to sub-optimal label noise partition criteria. In this work, we reveal this long-ignored problem and propose a simple yet effective solution, named Class Prototype-based label noise Cleaner (CPC). Unlike previous works treating all the classes equally, CPC fully considers loss distribution heterogeneity and applies class-aware modulation to partition the clean and noise data. CPC takes advantage of loss distribution modeling and intra-class consistency regularization in feature space simultaneously and thus can better distinguish clean and noise labels. We theoretically justify the effectiveness of our method by explaining it from the Expectation-Maximization (EM) framework. Extensive experiments are conducted on the noisy-label benchmarks CIFAR-10, CIFAR-100, Clothing1M and WebVision. The results show that CPC consistently brings about performance improvement across all benchmarks. Codes and pre-trained models will be released at https://github.com/hjjpku/CPC.git.

Large language models are increasingly trained on all the data ever produced by humans. Many have raised concerns about the trustworthiness of public benchmarks due to potential contamination in pre-training or fine-tuning datasets. While most data decontamination efforts apply string matching (e.g., n-gram overlap) to remove benchmark data, we show that these methods are insufficient, and simple variations of test data (e.g., paraphrasing, translation) can easily bypass these decontamination measures. Furthermore, we demonstrate that if such variation of test data is not eliminated, a 13B model can easily overfit a test benchmark and achieve drastically high performance, on par with GPT-4. We validate such observations in widely used benchmarks such as MMLU, GSK8k, and HumanEval. To address this growing risk, we propose a stronger LLM-based decontamination method and apply it to widely used pre-training and fine-tuning datasets, revealing significant previously unknown test overlap. For example, in pre-training sets such as RedPajama-Data-1T and StarCoder-Data, we identified that 8-18\% of the HumanEval benchmark overlaps. Interestingly, we also find such contamination in synthetic dataset generated by GPT-3.5/4, suggesting a potential risk of unintentional contamination. We urge the community to adopt stronger decontamination approaches when using public benchmarks. Moreover, we call for the community to actively develop fresh one-time exams to evaluate models accurately. Our decontamination tool is publicly available at https://github.com/lm-sys/llm-decontaminator.

The development of large language models (LLMs) depends on trustworthy evaluation. However, most current evaluations rely on public benchmarks, which are prone to data contamination issues that significantly compromise fairness. Previous researches have focused on constructing dynamic benchmarks to address contamination. However, continuously building new benchmarks is costly and cyclical. In this work, we aim to tackle contamination by analyzing the mechanisms of contaminated models themselves. Through our experiments, we discover that the overestimation of contaminated models is likely due to parameters acquiring shortcut solutions in training. We further propose a novel method for identifying shortcut neurons through comparative and causal analysis. Building on this, we introduce an evaluation method called shortcut neuron patching to suppress shortcut neurons. Experiments validate the effectiveness of our approach in mitigating contamination. Additionally, our evaluation results exhibit a strong linear correlation with MixEval, a recently released trustworthy benchmark, achieving a Spearman coefficient (rho) exceeding 0.95. This high correlation indicates that our method closely reveals true capabilities of the models and is trustworthy. We conduct further experiments to demonstrate the generalizability of our method across various benchmarks and hyperparameter settings. Code: https://github.com/GaryStack/Trustworthy-Evaluation

Recent studies show that in supervised fine-tuning (SFT) of large language models (LLMs), data quality matters more than quantity. While most data cleaning methods concentrate on filtering entire samples, the quality of individual tokens within a sample can vary significantly. After pre-training, even in high-quality samples, patterns or phrases that are not task-related can be redundant, uninformative, or even harmful. Continuing to fine-tune on these patterns may offer limited benefit and even degrade downstream task performance. In this paper, we investigate token quality from a noisy-label perspective and propose a generic token cleaning pipeline for SFT tasks. Our method filters out uninformative tokens while preserving those carrying key task-specific information. Specifically, we first evaluate token quality by examining the influence of model updates on each token, then apply a threshold-based separation. The token influence can be measured in a single pass with a fixed reference model or iteratively with self-evolving reference models. The benefits and limitations of both methods are analyzed theoretically by error upper bounds. Extensive experiments show that our framework consistently improves downstream performance. Code is available at https://github.com/UCSC-REAL/TokenCleaning.

Language models have shown promise in various tasks but can be affected by undesired data during training, fine-tuning, or alignment. For example, if some unsafe conversations are wrongly annotated as safe ones, the model fine-tuned on these samples may be harmful. Therefore, the correctness of annotations, i.e., the credibility of the dataset, is important. This study focuses on the credibility of real-world datasets, including the popular benchmarks Jigsaw Civil Comments, Anthropic Harmless & Red Team, PKU BeaverTails & SafeRLHF, that can be used for training a harmless language model. Given the cost and difficulty of cleaning these datasets by humans, we introduce a systematic framework for evaluating the credibility of datasets, identifying label errors, and evaluating the influence of noisy labels in the curated language data, specifically focusing on unsafe comments and conversation classification. With the framework, we find and fix an average of 6.16% label errors in 11 datasets constructed from the above benchmarks. The data credibility and downstream learning performance can be remarkably improved by directly fixing label errors, indicating the significance of cleaning existing real-world datasets. We provide an open-source tool, Docta, for data cleaning at https://github.com/Docta-ai/docta.

While data are the primary fuel for machine learning models, they often suffer from missing values, especially when collected in real-world scenarios. However, many off-the-shelf machine learning models, including artificial neural network models, are unable to handle these missing values directly. Therefore, extra data preprocessing and curation steps, such as data imputation, are inevitable before learning and prediction processes. In this study, we propose a simple and intuitive yet effective method for pruning missing values (PROMISSING) during learning and inference steps in neural networks. In this method, there is no need to remove or impute the missing values; instead, the missing values are treated as a new source of information (representing what we do not know). Our experiments on simulated data, several classification and regression benchmarks, and a multi-modal clinical dataset show that PROMISSING results in similar prediction performance compared to various imputation techniques. In addition, our experiments show models trained using PROMISSING techniques are becoming less decisive in their predictions when facing incomplete samples with many unknowns. This finding hopefully advances machine learning models from being pure predicting machines to more realistic thinkers that can also say "I do not know" when facing incomplete sources of information.

We present SURE-Score: an approach for learning score-based generative models using training samples corrupted by additive Gaussian noise. When a large training set of clean samples is available, solving inverse problems via score-based (diffusion) generative models trained on the underlying fully-sampled data distribution has recently been shown to outperform end-to-end supervised deep learning. In practice, such a large collection of training data may be prohibitively expensive to acquire in the first place. In this work, we present an approach for approximately learning a score-based generative model of the clean distribution, from noisy training data. We formulate and justify a novel loss function that leverages Stein's unbiased risk estimate to jointly denoise the data and learn the score function via denoising score matching, while using only the noisy samples. We demonstrate the generality of SURE-Score by learning priors and applying posterior sampling to ill-posed inverse problems in two practical applications from different domains: compressive wireless multiple-input multiple-output channel estimation and accelerated 2D multi-coil magnetic resonance imaging reconstruction, where we demonstrate competitive reconstruction performance when learning at signal-to-noise ratio values of 0 and 10 dB, respectively.

Clinical decision-making in oncology requires predicting dynamic disease evolution, a task current static AI predictors cannot perform. While world models (WMs) offer a paradigm for generative prediction, existing medical applications remain limited. Existing methods often rely on stochastic diffusion models, focusing on visual reconstruction rather than causal, physiological transitions. Furthermore, in medical domain, models like MeWM typically ignore patient-specific temporal and clinical contexts and lack a feedback mechanism to link predictions to treatment decisions. To address these gaps, we introduce CLARITY, a medical world model that forecasts disease evolution directly within a structured latent space. It explicitly integrates time intervals (temporal context) and patient-specific data (clinical context) to model treatment-conditioned progression as a smooth, interpretable trajectory, and thus generate physiologically faithful, individualized treatment plans. Finally, CLARITY introduces a novel prediction-to-decision framework, translating latent rollouts into transparent, actionable recommendations. CLARITY demonstrates state-of-the-art performance in treatment planning. On the MU-Glioma-Post dataset, our approach outperforms recent MeWM by 12\%, and significantly surpasses all other medical-specific large language models.

Correct labels are indispensable for training effective machine learning models. However, creating high-quality labels is expensive, and even professionally labeled data contains errors and ambiguities. Filtering and denoising can be applied to curate labeled data prior to training, at the cost of additional processing and loss of information. An alternative is on-the-fly sample reweighting during the training process to decrease the negative impact of incorrect or ambiguous labels, but this typically requires clean seed data. In this work we propose unsupervised on-the-fly meta loss rescaling to reweight training samples. Crucially, we rely only on features provided by the model being trained, to learn a rescaling function in real time without knowledge of the true clean data distribution. We achieve this via a novel meta learning setup that samples validation data for the meta update directly from the noisy training corpus by employing the rescaling function being trained. Our proposed method consistently improves performance across various NLP tasks with minimal computational overhead. Further, we are among the first to attempt on-the-fly training data reweighting on the challenging task of dialogue modeling, where noisy and ambiguous labels are common. Our strategy is robust in the face of noisy and clean data, handles class imbalance, and prevents overfitting to noisy labels. Our self-taught loss rescaling improves as the model trains, showing the ability to keep learning from the model's own signals. As training progresses, the impact of correctly labeled data is scaled up, while the impact of wrongly labeled data is suppressed.

Air-quality forecasting models are commonly evaluated on regional, preprocessed, and normalized datasets, where missing observations are removed or artificially completed. Such protocols simplify comparison but hide the conditions that dominate real monitoring networks: uneven global coverage, structured missingness, heterogeneous pollutant scales, and deployment cost. We introduce AirQualityBench, a global multi-pollutant benchmark designed to evaluate forecasting models under these realistic conditions. The benchmark contains hourly observations from 3,720 monitoring stations over 2021--2025, covers six major pollutants, and preserves provider-native observation masks. Rather than imputing a dense data tensor, AirQualityBench exposes missingness as part of the forecasting problem and reports errors on valid future observations after inverse transformation to physical concentration scales. Evaluating representative spatio-temporal models under this unified protocol shows that strong performance on sanitized datasets does not reliably transfer to global, fragmented monitoring streams. AirQualityBench therefore serves as a realistic testbed for scalable, mask-aware, and physically interpretable air-quality forecasting. All benchmark data, code, evaluation scripts, and baseline implementations are available at https://github.com/Star-Learning/AirQualityBench{GitHub}.

The recent success of machine learning models, especially large-scale classifiers and language models, relies heavily on training with massive data. These data are often collected from online sources. This raises serious concerns about the protection of user data, as individuals may not have given consent for their data to be used in training. To address this concern, recent studies introduce the concept of unlearnable examples, i.e., data instances that appear natural but are intentionally altered to prevent models from effectively learning from them. While existing methods demonstrate empirical effectiveness, they typically rely on heuristic trials and lack formal guarantees. Besides, when unlearnable examples are mixed with clean data, as is often the case in practice, their unlearnability disappears. In this work, we propose a novel approach to constructing unlearnable examples by systematically maximising the Bayes error, a measurement of irreducible classification error. We develop an optimisation-based approach and provide an efficient solution using projected gradient ascent. Our method provably increases the Bayes error and remains effective when the unlearning examples are mixed with clean samples. Experimental results across multiple datasets and model architectures are consistent with our theoretical analysis and show that our approach can restrict data learnability, effectively in practice.

The remarkable performance of large language models (LLMs) in generation tasks has enabled practitioners to leverage publicly available models to power custom applications, such as chatbots and virtual assistants. However, the data used to train or fine-tune these LLMs is often undisclosed, allowing an attacker to compromise the data and inject backdoors into the models. In this paper, we develop a novel inference time defense, named CleanGen, to mitigate backdoor attacks for generation tasks in LLMs. CleanGenis a lightweight and effective decoding strategy that is compatible with the state-of-the-art (SOTA) LLMs. Our insight behind CleanGen is that compared to other LLMs, backdoored LLMs assign significantly higher probabilities to tokens representing the attacker-desired contents. These discrepancies in token probabilities enable CleanGen to identify suspicious tokens favored by the attacker and replace them with tokens generated by another LLM that is not compromised by the same attacker, thereby avoiding generation of attacker-desired content. We evaluate CleanGen against five SOTA backdoor attacks. Our results show that CleanGen achieves lower attack success rates (ASR) compared to five SOTA baseline defenses for all five backdoor attacks. Moreover, LLMs deploying CleanGen maintain helpfulness in their responses when serving benign user queries with minimal added computational overhead.

Tabular Foundation Models (TFMs) achieve state-of-the-art zero-shot accuracy on small tabular datasets by meta-learning over synthetic data-generating processes -- making them highly attractive for practitioners who cannot afford large annotated corpora. However, their in-context learning mechanism assumes approximately clean inputs: missing values, outliers, and duplicates in the real-world data create a prior mismatch that degrades both accuracy and confidence calibration simultaneously. Correcting this mismatch requires sequential decisions over cleaning operators whose interactions no static preprocessing rule can anticipate -a natural fit for reinforcement learning~(RL). We introduce L2C2, the first deep RL framework framing tabular data cleaning as prior alignment: a learned policy sequences operators to minimize the distributional gap between dirty input and the TFM's synthetic prior. Six experiments on ten OpenML benchmark datasets establish: 1) three of seven reward designs collapse to degenerate trivial cleaning strategies -- principled reward engineering is scientifically non-trivial; 2) the novel TFMAwareReward reward we propose selects structurally distinct pipelines on 4/10 datasets and achieves higher TabPFN accuracy on those diverging cases (mean 0.851 vs. 0.843; Wilcoxon p=0.063, n=4) while never underperforming; 3) parameterized cleaning actions improve best-found pipeline reward on 9/10 datasets (Wilcoxon p=0.004); and 4) a policy pre-trained on one single source dataset exceeds scratch training at the 2,000-step fine-tuning checkpoint on all three held-out datasets (up to +28.8% after full fine-tuning) demonstrating cross-dataset transfer of prior-alignment knowledge. These findings establish that prior alignment is a principled data preparation strategy for TFM deployment on real-world tabular data.

We propose a novel framework to perform classification via deep learning in the presence of noisy annotations. When trained on noisy labels, deep neural networks have been observed to first fit the training data with clean labels during an "early learning" phase, before eventually memorizing the examples with false labels. We prove that early learning and memorization are fundamental phenomena in high-dimensional classification tasks, even in simple linear models, and give a theoretical explanation in this setting. Motivated by these findings, we develop a new technique for noisy classification tasks, which exploits the progress of the early learning phase. In contrast with existing approaches, which use the model output during early learning to detect the examples with clean labels, and either ignore or attempt to correct the false labels, we take a different route and instead capitalize on early learning via regularization. There are two key elements to our approach. First, we leverage semi-supervised learning techniques to produce target probabilities based on the model outputs. Second, we design a regularization term that steers the model towards these targets, implicitly preventing memorization of the false labels. The resulting framework is shown to provide robustness to noisy annotations on several standard benchmarks and real-world datasets, where it achieves results comparable to the state of the art.

Conformal prediction is a statistical framework that generates prediction sets containing ground-truth labels with a desired coverage guarantee. The predicted probabilities produced by machine learning models are generally miscalibrated, leading to large prediction sets in conformal prediction. To address this issue, we propose a novel algorithm named Sorted Adaptive Prediction Sets (SAPS), which discards all the probability values except for the maximum softmax probability. The key idea behind SAPS is to minimize the dependence of the non-conformity score on the probability values while retaining the uncertainty information. In this manner, SAPS can produce compact prediction sets and communicate instance-wise uncertainty. Extensive experiments validate that SAPS not only lessens the prediction sets but also broadly enhances the conditional coverage rate of prediction sets.

Grammatical Error Correction has seen significant progress with the recent advancements in deep learning. As those methods require huge amounts of data, synthetic datasets are being built to fill this gap. Unfortunately, synthetic datasets are not organic enough in some cases and even require clean data to start with. Furthermore, most of the work that has been done is focused mostly on English. In this work, we introduce a new organic data-driven approach, clean insertions, to build parallel Turkish Grammatical Error Correction datasets from any organic data, and to clean the data used for training Large Language Models. We achieve state-of-the-art results on two Turkish Grammatical Error Correction test sets out of the three publicly available ones. We also show the effectiveness of our method on the training losses of training language models.

We introduce a family of chronologically consistent, instruction-tuned large language models to eliminate lookahead bias. Each model is trained only on data available before a clearly defined knowledge-cutoff date, ensuring strict temporal separation from any post-cutoff data. The resulting framework offers (i) a simple, conversational chat interface, (ii) fully open, fixed model weights that guarantee replicability, and (iii) a conservative lower bound on forecast accuracy, isolating the share of predictability that survives once training leakage is removed. Together, these features provide researchers with an easy-to-use generative AI tool useful for a wide range of prediction tasks that is free of lookahead bias.

High-quality, error-free datasets are a key ingredient in building reliable, accurate, and unbiased machine learning (ML) models. However, real world datasets often suffer from errors due to sensor malfunctions, data entry mistakes, or improper data integration across multiple sources that can severely degrade model performance. Detecting and correcting these issues typically require tailor-made solutions and demand extensive domain expertise. Consequently, automation is challenging, rendering the process labor-intensive and tedious. In this study, we investigate whether Large Language Models (LLMs) can help alleviate the burden of manual data cleaning. We set up an experiment in which an LLM, paired with Python, is tasked with cleaning the training dataset to improve the performance of a learning algorithm without having the ability to modify the training pipeline or perform any feature engineering. We run this experiment on multiple Kaggle datasets that have been intentionally corrupted with errors. Our results show that LLMs can identify and correct erroneous entries, such as illogical values or outlier, by leveraging contextual information from other features within the same row, as well as feedback from previous iterations. However, they struggle to detect more complex errors that require understanding data distribution across multiple rows, such as trends and biases.

Machine unlearning aims to remove targeted data or behaviors from a trained model without retraining from scratch. Yet most evaluations assume that the examples to forget are already known. In realistic language-model deployments, a requester may ask a model to stop reproducing a song or book without knowing which spans, documents, quotations, or near-duplicates in a trillion-token corpus support that behavior. We study this missing upstream problem, forget set curation: mapping a suppression request to the data passed to an unlearning algorithm. We introduce CleanSlate, a benchmark for verbatim output suppression over songs and books, with model-specific extraction profiles, content-grounded QA, and capability-retention evaluations. CleanSlate exposes two failure modes. Natural lexical and exact-substring curators often yield forget sets that lead to weak suppression. An evaluation-aware curator suppresses requested continuations almost completely, but causes collateral regression on non-requested content and model-dependent capability loss. These results show that practical unlearning is not only an optimization problem once a forget set is given: the data chosen for forgetting determines both what can be unlearnt and what else is damaged.

Humor generation is a challenging task in natural language processing due to limited resources and the quality of existing datasets. Available humor language resources often suffer from toxicity and duplication, limiting their effectiveness for training robust models. This paper proposes CleanComedy, a specialized, partially annotated toxicity-filtered corpus of English and Russian jokes collected from various sources. We study the effectiveness of our data filtering approach through a survey on humor and toxicity levels in various joke groups. In addition, we study advances in computer humor generation by comparing jokes written by humans with various groups of generative jokes, including our baseline models trained on the CleanComedy datasets.

Critical events in multivariate time series, from turbine failures to cardiac arrhythmias, demand accurate prediction, yet labeled data is scarce because such events are rare and costly to annotate. We introduce HEPA (Horizon-conditioned Event Predictive Architecture), built on two key principles. First, a causal Transformer encoder is pretrained via a Joint-Embedding Predictive Architecture (JEPA): a horizon-conditioned predictor learns to forecast future representations rather than future values, forcing the encoder to capture predictable temporal dynamics from unlabeled data alone. Second, we freeze the encoder and finetune only the predictor toward the target event, producing a monotonic survival cumulative distribution function (CDF) over horizons. With fixed architecture and optimiser hyperparameters across all benchmarks, HEPA handles water contamination, cyberattack detection, volatility regimes, and eight further event types across 11 domains, exceeding leading time-series architectures including PatchTST, iTransformer, MAE, and Chronos-2 on at least 10 of 14 benchmarks, with an order of magnitude fewer tuned parameters and, on lifecycle datasets, an order of magnitude less labeled data.

CleanRL is an open-source library that provides high-quality single-file implementations of Deep Reinforcement Learning algorithms. It provides a simpler yet scalable developing experience by having a straightforward codebase and integrating production tools to help interact and scale experiments. In CleanRL, we put all details of an algorithm into a single file, making these performance-relevant details easier to recognize. Additionally, an experiment tracking feature is available to help log metrics, hyperparameters, videos of an agent's gameplay, dependencies, and more to the cloud. Despite succinct implementations, we have also designed tools to help scale, at one point orchestrating experiments on more than 2000 machines simultaneously via Docker and cloud providers. Finally, we have ensured the quality of the implementations by benchmarking against a variety of environments. The source code of CleanRL can be found at https://github.com/vwxyzjn/cleanrl

Human feedback plays a pivotal role in aligning large language models (LLMs) with human preferences. However, such feedback is often noisy or inconsistent, which can degrade the quality of reward models and hinder alignment. While various automated data cleaning methods have been proposed to mitigate this issue, a systematic evaluation of their effectiveness and generalizability remains lacking. To bridge this gap, we introduce the first comprehensive benchmark for evaluating 13 preference data cleaning methods in the context of LLM alignment. PrefCleanBench offers a standardized protocol to assess cleaning strategies in terms of alignment performance and generalizability across diverse datasets, model architectures, and optimization algorithms. By unifying disparate methods and rigorously comparing them, we uncover key factors that determine the success of data cleaning in alignment tasks. This benchmark lays the groundwork for principled and reproducible approaches to improving LLM alignment through better data quality-highlighting the crucial but underexplored role of data preprocessing in responsible AI development. We release modular implementations of all methods to catalyze further research: https://github.com/deeplearning-wisc/PrefCleanBench.

In light of recent work on scheduling with predicted job sizes, we consider the effect of the cost of predictions in queueing systems, removing the assumption in prior research that predictions are external to the system's resources and/or cost-free. In particular, we introduce a novel approach to utilizing predictions, SkipPredict, designed to address their inherent cost. Rather than uniformly applying predictions to all jobs, we propose a tailored approach that categorizes jobs based on their prediction requirements. To achieve this, we employ one-bit "cheap predictions" to classify jobs as either short or long. SkipPredict prioritizes predicted short jobs over long jobs, and for the latter, SkipPredict applies a second round of more detailed "expensive predictions" to approximate Shortest Remaining Processing Time for these jobs. Our analysis takes into account the cost of prediction. We examine the effect of this cost for two distinct models. In the external cost model, predictions are generated by some external method without impacting job service times but incur a cost. In the server time cost model, predictions themselves require server processing time, and are scheduled on the same server as the jobs.

Learning exists in the context of data, yet notions of confidence typically focus on model predictions, not label quality. Confident learning (CL) is an alternative approach which focuses instead on label quality by characterizing and identifying label errors in datasets, based on the principles of pruning noisy data, counting with probabilistic thresholds to estimate noise, and ranking examples to train with confidence. Whereas numerous studies have developed these principles independently, here, we combine them, building on the assumption of a class-conditional noise process to directly estimate the joint distribution between noisy (given) labels and uncorrupted (unknown) labels. This results in a generalized CL which is provably consistent and experimentally performant. We present sufficient conditions where CL exactly finds label errors, and show CL performance exceeding seven recent competitive approaches for learning with noisy labels on the CIFAR dataset. Uniquely, the CL framework is not coupled to a specific data modality or model (e.g., we use CL to find several label errors in the presumed error-free MNIST dataset and improve sentiment classification on text data in Amazon Reviews). We also employ CL on ImageNet to quantify ontological class overlap (e.g., estimating 645 "missile" images are mislabeled as their parent class "projectile"), and moderately increase model accuracy (e.g., for ResNet) by cleaning data prior to training. These results are replicable using the open-source cleanlab release.

As model finetuning is central to the modern NLP, we set to maximize its efficiency. Motivated by redundancy in training examples and the sheer sizes of pretrained models, we exploit a key opportunity: training only on important data. To this end, we set to filter training examples in a streaming fashion, in tandem with training the target model. Our key techniques are two: (1) automatically determine a training loss threshold for skipping backward training passes; (2) run a meta predictor for further skipping forward training passes. We integrate the above techniques in a holistic, three-stage training process. On a diverse set of benchmarks, our method reduces the required training examples by up to 5.3times and training time by up to 6.8times, while only seeing minor accuracy degradation. Our method is effective even when training one epoch, where each training example is encountered only once. It is simple to implement and is compatible with the existing finetuning techniques. Code is available at: https://github.com/xo28/efficient- NLP-multistage-training

Reinforcement learning with verifiable rewards (RLVR) has driven recent capability advances of large language models across various domains. Recent studies suggest that improved RLVR algorithms allow models to learn effectively from incorrect annotations, achieving performance comparable to learning from clean data. In this work, we show that these findings are invalid because the claimed 100% noisy training data is "contaminated" with clean data. After rectifying the dataset with a rigorous re-verification pipeline, we demonstrate that noise is destructive to RLVR. We show that existing RLVR algorithm improvements fail to mitigate the impact of noise, achieving similar performance to that of the basic GRPO. Furthermore, we find that the model trained on truly incorrect annotations performs 8-10% worse than the model trained on clean data across mathematical reasoning benchmarks. Finally, we show that these findings hold for real-world noise in Text2SQL tasks, where training on real-world, human annotation errors cause 5-12% lower accuracy than clean data. Our results show that current RLVR methods cannot yet compensate for poor data quality. High-quality data remains essential.

Time series forecasting is a fundamental problem with applications in climate, energy, healthcare, and finance. Many existing approaches require domain-specific feature engineering and substantial labeled data for each task. We introduce PatchFormer, a patch-based time series foundation model that uses hierarchical masked reconstruction for self-supervised pretraining and lightweight adapters for efficient transfer. PatchFormer segments time series into patches and learns multiscale temporal representations with learnable aggregation across temporal scales. Pretraining uses masked patch reconstruction with dynamic masking and objectives that encourage both local accuracy and global consistency, followed by cross-domain knowledge distillation. Experiments on 24 benchmark datasets spanning weather, energy, traffic, finance, and healthcare demonstrate state-of-the-art zero-shot multi-horizon forecasting, reducing mean squared error by 27.3 percent relative to strong baselines while requiring 94 percent less task-specific training data. The model exhibits near log-linear scaling with more pretraining data up to 100 billion points and processes length-512 sequences 3.8x faster than full-sequence transformers.

Recently, there has been extensive research interest in training deep networks to denoise images without clean reference. However, the representative approaches such as Noise2Noise, Noise2Void, Stein's unbiased risk estimator (SURE), etc. seem to differ from one another and it is difficult to find the coherent mathematical structure. To address this, here we present a novel approach, called Noise2Score, which reveals a missing link in order to unite these seemingly different approaches. Specifically, we show that image denoising problems without clean images can be addressed by finding the mode of the posterior distribution and that the Tweedie's formula offers an explicit solution through the score function (i.e. the gradient of log likelihood). Our method then uses the recent finding that the score function can be stably estimated from the noisy images using the amortized residual denoising autoencoder, the method of which is closely related to Noise2Noise or Nose2Void. Our Noise2Score approach is so universal that the same network training can be used to remove noises from images that are corrupted by any exponential family distributions and noise parameters. Using extensive experiments with Gaussian, Poisson, and Gamma noises, we show that Noise2Score significantly outperforms the state-of-the-art self-supervised denoising methods in the benchmark data set such as (C)BSD68, Set12, and Kodak, etc.

Improving the safety of large language models (LLMs) often comes at the expense of utility, as globally applied safety tuning may affect model responses to both harmful and benign inputs. We propose Continuous LatEnt Adapter Routing (CLEAR), a conditional safety adaptation framework that uses a lightweight hidden-state gate to continuously control the activation strength of a safety low-rank adapter. CLEAR aims to reduce harmful completions while avoiding unnecessary changes to the frozen backbone that could degrade performance on benign prompts. Experiments on widely used safety and utility benchmarks show that CLEAR improves robustness on HarmBench while reducing the utility degradation observed with globally applied safety tuning such as SFT or standard low-rank adaptation (LoRA). On Llama-3-8B-Instruct, CLEAR reduces HarmBench ASR from 32.3\% to 0.5\%, while retaining most of the base model's utility and achieving up to 7.1 percentage points higher GSM8K accuracy than globally applied SFT or LoRA. These results suggest that CLEAR is a promising mechanism for improving the safety--utility trade-off in LLM alignment.