Daily Papers

Retrieval-Augmented Generation for software engineering often relies on vector similarity search, which captures topical similarity but can fail on multi-hop architectural reasoning such as controller to service to repository chains, interface-driven wiring, and inheritance. This paper benchmarks three retrieval pipelines on Java codebases (Shopizer, with additional runs on ThingsBoard and OpenMRS Core): (A) vector-only No-Graph RAG, (B) an LLM-generated knowledge graph RAG (LLM-KB), and (C) a deterministic AST-derived knowledge graph RAG (DKB) built with Tree-sitter and bidirectional traversal. Using 15 architecture and code-tracing queries per repository, we measure indexing time, query latency, corpus coverage, cost, and answer correctness. DKB builds its graph in seconds, while LLM-KB requires much longer graph generation. LLM-KB also shows indexing incompleteness: on Shopizer, 377 files are skipped or missed, reducing embedded chunk coverage and graph size compared to DKB. End-to-end cost is modest for DKB relative to the vector-only baseline but much higher for LLM-KB, especially as repository scale increases. Query latency is similar for No-Graph and DKB, while LLM-KB is slower and more variable. On the Shopizer question suite, DKB achieves the highest correctness, LLM-KB is close behind, and the vector-only baseline performs worst on upstream architectural queries and has the highest hallucination risk. Overall, deterministic AST-derived graphs provide more reliable coverage and multi-hop grounding than LLM-extracted graphs at substantially lower indexing cost.

A cheap swarm of unreliable agents can be steered to a correct consensus by a few strong, expensive "oracle" correctors. We ask how much one must spend, and where to place the oracles. We model the swarm as a consensus on a graph in which each oracle pins one node toward the truth at a cost-coupled, concave strength, and measure quality by the coherence H(R)=tr M(R)^{-1}. Our first result is that H stays submodular (each added oracle helps less than the last) even when the oracles differ in strength, so a cost-benefit greedy comes within 1-1/e of the best placement at any budget. Inverting the budget gives the budget-correctness frontier B*(eps), the least spend that guarantees an eps-correct consensus: closed-form on the complete graph, and a minimal oracle count k* when oracles cost the same. Whether a budget then buys a few strong oracles or many medium onese curvature of the cost-quality law: diminishing returns favour spreadsharply increasion. Measured onthe Qwen3 ladder (0.6-32B), the law is concave for math verificatio convex foremergent code tracing, so the verdict is genuinely task-dependent.https://github.com/YehudaItkin/budgeted-oracle-placemen

Code agents are advancing rapidly, but debugging them is becoming increasingly difficult. As frameworks orchestrate parallel tool calls and multi-stage workflows over complex tasks, making the agent's state transitions and error propagation hard to observe. In these runs, an early misstep can trap the agent in unproductive loops or even cascade into fundamental errors, forming hidden error chains that make it hard to tell when the agent goes off track and why. Existing agent tracing analyses either focus on simple interaction or rely on small-scale manual inspection, which limits their scalability and usefulness for real coding workflows. We present CodeTracer, a tracing architecture that parses heterogeneous run artifacts through evolving extractors, reconstructs the full state transition history as a hierarchical trace tree with persistent memory, and performs failure onset localization to pinpoint the failure origin and its downstream chain. To enable systematic evaluation, we construct CodeTraceBench from a large collection of executed trajectories generated by four widely used code agent frameworks on diverse code tasks (e.g., bug fixing, refactoring, and terminal interaction), with supervision at both the stage and step levels for failure localization. Experiments show that CodeTracer substantially outperforms direct prompting and lightweight baselines, and that replaying its diagnostic signals consistently recovers originally failed runs under matched budgets. Our code and data are publicly available.

Recent advancements in large language models (LLMs) have significantly enhanced their ability to understand both natural language and code, driving their use in tasks like natural language-to-code (NL2Code) and code summarization. However, LLMs are prone to hallucination-outputs that stray from intended meanings. Detecting hallucinations in code summarization is especially difficult due to the complex interplay between programming and natural languages. We introduce a first-of-its-kind dataset with sim10K samples, curated specifically for hallucination detection in code summarization. We further propose a novel Entity Tracing Framework (ETF) that a) utilizes static program analysis to identify code entities from the program and b) uses LLMs to map and verify these entities and their intents within generated code summaries. Our experimental analysis demonstrates the effectiveness of the framework, leading to a 0.73 F1 score. This approach provides an interpretable method for detecting hallucinations by grounding entities, allowing us to evaluate summary accuracy.

Most existing pre-trained language models for source code focus on learning the static code text, typically augmented with static code structures (abstract syntax tree, dependency graphs, etc.). However, program semantics will not be fully exposed before the real execution. Without an understanding of the program execution, statically pre-trained models fail to comprehensively capture the dynamic code properties, such as the branch coverage and the runtime variable values, and they are consequently less effective at code understanding tasks, such as retrieving semantic clones and detecting software vulnerabilities. To close the gap between the static nature of language models and the dynamic characteristics of programs, we introduce TRACED, an execution-aware pre-training strategy for source code. Specifically, we pre-train code language models with a combination of source code, executable inputs, and corresponding execution traces. Our goal is to teach code models the complicated execution logic during the pre-training, enabling the model to statically estimate the dynamic code properties without repeatedly executing code during task-specific fine-tuning. To illustrate the effectiveness of our proposed approach, we fine-tune and evaluate TRACED on three downstream tasks: static execution estimation, clone retrieval, and vulnerability detection. The empirical results show that TRACED relatively improves the statically pre-trained code models by 12.4% for complete execution path prediction and by 25.2% for runtime variable value predictions. TRACED also significantly outperforms statically pre-trained models in clone retrieval and vulnerability detection across four public benchmarks.

As programmers write code, they often edit and retry multiple times, creating rich "interaction traces" that reveal how they approach coding tasks and provide clues about their level of skill development. For novice programmers in particular, these traces reflect the diverse reasoning processes they employ to code, such as exploratory behavior to understand how a programming concept works, re-strategizing in response to bugs, and personalizing stylistic choices. In this work, we explore what can be learned from training language models on such reasoning traces: not just about code, but about coders, and particularly students learning to program. We introduce a dataset of over 3.8 million programming reasoning traces from users of Pencil Code, a free online educational platform used by students to learn simple programming concepts. Compared to models trained only on final programs or synthetically-generated traces, we find that models trained on real traces are stronger at modeling diverse student behavior. Through both behavioral and probing analyses, we also find that many properties of code traces, such as goal backtracking or number of comments, can be predicted from learned representations of the students who write them. Building on this result, we show that we can help students recover from mistakes by steering code generation models to identify a sequence of edits that will results in more correct code while remaining close to the original student's style. Together, our results suggest that many properties of code are properties of individual students and that training on edit traces can lead to models that are more steerable, more predictive of student behavior while programming, and better at generating programs in their final states. Code and data is available at https://github.com/meghabyte/pencilcode-public

Large Language Models (LLMs) often generate code with subtle but critical bugs, especially for complex tasks. Existing automated repair methods typically rely on superficial pass/fail signals, offering limited visibility into program behavior and hindering precise error localization. In addition, without a way to learn from prior failures, repair processes often fall into repetitive and inefficient cycles. To overcome these challenges, we present TraceCoder, a collaborative multi-agent framework that emulates the observe-analyze-repair process of human experts. The framework first instruments the code with diagnostic probes to capture fine-grained runtime traces, enabling deep insight into its internal execution. It then conducts causal analysis on these traces to accurately identify the root cause of the failure. This process is further enhanced by a novel Historical Lesson Learning Mechanism (HLLM), which distills insights from prior failed repair attempts to inform subsequent correction strategies and prevent recurrence of similar mistakes. To ensure stable convergence, a Rollback Mechanism enforces that each repair iteration constitutes a strict improvement toward the correct solution. Comprehensive experiments across multiple benchmarks show that TraceCoder achieves up to a 34.43\% relative improvement in Pass@1 accuracy over existing advanced baselines. Ablation studies verify the significance of each system component, with the iterative repair process alone contributing a 65.61\% relative gain in accuracy. Furthermore, TraceCoder significantly outperforms leading iterative methods in terms of both accuracy and cost-efficiency.

Memory is essential for enabling large language models to support long-horizon reasoning, yet existing memory systems remain unreliable and difficult to debug. Tracing memory's dynamic evolution is crucial to understand how information is synthesized, propagated, or corrupted over time. In this work, we study the new problem of error tracing and attribution in LLM memory systems. We propose a novel framework that transforms memory pipelines into executable memory evolution graphs, enabling fine-grained tracing of operational information flow. We then construct MemTraceBench, a benchmark collected from representative memory systems such as Long-Context, RAG, Mem0, and EverMemOS, to systematically study memory failure modes. We further introduce an automatic attribution method that iteratively traces operation subgraphs to pinpoint the root cause of any failed case. Our analysis reveals that memory failures are systematic, stemming from operation-level issues like information loss and retrieval misalignment. Crucially, we leverage these fine-grained attribution signals to guide downstream prompt optimization, establishing a closed-loop system that automatically corrects faults and boosts end-task performance by up to 7.62%. Code will be released at https://github.com/zjunlp/MemTrace.

Interpretability research aims to bridge the gap between empirical success and our scientific understanding of the inner workings of large language models (LLMs). However, most existing research focuses on analyzing a single mechanism, such as how models copy or recall factual knowledge. In this work, we propose a formulation of competition of mechanisms, which focuses on the interplay of multiple mechanisms instead of individual mechanisms and traces how one of them becomes dominant in the final prediction. We uncover how and where mechanisms compete within LLMs using two interpretability methods: logit inspection and attention modification. Our findings show traces of the mechanisms and their competition across various model components and reveal attention positions that effectively control the strength of certain mechanisms. Code: https://github.com/francescortu/comp-mech. Data: https://huggingface.co/datasets/francescortu/comp-mech.

Context. Cosmic voids are vast underdense regions in the cosmic web that encode crucial information about structure formation, the composition of the Universe, and its expansion history. Due to their lower density, these regions are less affected by non-linear gravitational dynamics, making them suitable candidates for analysis using semi-analytic methods. Aims. We assess the accuracy of the PINOCCHIO code, a fast tool for generating dark matter halo catalogs based on Lagrangian Perturbation Theory, in modeling the statistical properties of cosmic voids. We validate this approach by comparing the resulting void statistics measured from PINOCCHIO to those obtained from N-body simulations. Methods. We generate a set of simulations using PINOCCHIO and OpenGADGET3, assuming a fiducial cosmology and varying the resolution. For a given resolution, the simulations share the same initial conditions between the different simulation codes. Snapshots are saved at multiple redshifts for each simulation and post-processed using the watershed void finder VIDE to identify cosmic voids. For each simulation code, we measure the following statistics: void size function, void ellipticity function, core density function, and the void radial density profile. We use these statistics to quantify the accuracy of PINOCCHIO relative to OpenGADGET3 in the context of cosmic voids. Results. We find agreement for all void statistics at better than 2{\sigma} between PINOCCHIO and OpenGADGET3, with no systematic difference in redshift trends. This demonstrates that the PINOCCHIO code can reliably produce void statistics with high computational efficiency compared to full N-body simulations.

Large Language Models (LLMs) are capable of recalling multilingual factual knowledge present in their pretraining data. However, most studies evaluate only the final model, leaving the development of factual recall and crosslingual consistency throughout pretraining largely unexplored. In this work, we trace how factual recall and crosslingual consistency evolve during pretraining, focusing on OLMo-7B as a case study. We find that both accuracy and consistency improve over time for most languages. We show that this improvement is primarily driven by the fact frequency in the pretraining corpus: more frequent facts are more likely to be recalled correctly, regardless of language. Yet, some low-frequency facts in non-English languages can still be correctly recalled. Our analysis reveals that these instances largely benefit from crosslingual transfer of their English counterparts -- an effect that emerges predominantly in the early stages of pretraining. We pinpoint two distinct pathways through which multilingual factual knowledge acquisition occurs: (1) frequency-driven learning, which is dominant and language-agnostic, and (2) crosslingual transfer, which is limited in scale and typically constrained to relation types involving named entities. We release our code and data to facilitate further research at https://github.com/cisnlp/multilingual-fact-tracing.

Recent progress in generative AI has made it increasingly easy to create natural-sounding deepfake speech from just a few seconds of audio. While these tools support helpful applications, they also raise serious concerns by making it possible to generate convincing fake speech in many languages. Current research has largely focused on detecting fake speech, but little attention has been given to tracing the source models used to generate it. This paper introduces the first benchmark for multilingual speech deepfake source tracing, covering both mono- and cross-lingual scenarios. We comparatively investigate DSP- and SSL-based modeling; examine how SSL representations fine-tuned on different languages impact cross-lingual generalization performance; and evaluate generalization to unseen languages and speakers. Our findings offer the first comprehensive insights into the challenges of identifying speech generation models when training and inference languages differ. The dataset, protocol and code are available at https://github.com/xuanxixi/Multilingual-Source-Tracing.

Mechanistic interpretability seeks to explain neural network behavior by decomposing model computations into interpretable features and circuits. While transcoder-based circuit tracing has recently enabled detailed causal analyses of large language models, multimodal diffusion transformers for image generation remain comparatively opaque. We still lack tools for understanding how semantic information propagates across denoising steps and how text and image representations interact within double-stream MM-DiT architectures. Existing methods provide only partial insight: attention maps expose a limited view of token interactions, while sparse autoencoders can discover interpretable features but do not directly reveal how these features are transformed and composed through nonlinear MLP layers. In this work, we extend transcoder-based circuit tracing to multimodal diffusion transformers. We train timestep-conditioned transcoders that faithfully approximate the input-output behavior of MLP sublayers in FLUX.1[schnell]. By replacing MLPs with transcoders and linearizing the remaining computation, we obtain exact feature-to-feature attribution and recover compact, interpretable circuits. Empirically, our transcoders match or slightly outperform sparse autoencoders on the sparsity-faithfulness tradeoff. The resulting circuits reveal mechanisms underlying attribute binding and cross-stream semantic propagation, and provide causal explanations for systematic generation errors. Moreover, circuit-guided interventions are substantially more precise and effective than standard SAE-based steering. Our results demonstrate that transcoder-based circuit analysis is feasible for state-of-the-art diffusion transformers and provides a powerful framework for understanding and controlling multimodal generative models. The code is available at https://github.com/Artalmaz31/DifFRACT

The proliferation of Reinforcement Learning from Verifiable Rewards (RLVR) datasets has exacerbated provenance collapse due to unclear lineage among existing datasets. To bridge this fragmented RLVR data landscape, we propose Atomic-source Tracing via Lineage-Aware Search (ATLAS), a systematic framework for tracing RLVR datasets back to their atomic sources, attributing over 99.7% of 1.45M instances to 20 atomic sources. Our analysis reveals that most RLVR datasets are variants of a small set of shared upstream sources, with few introducing genuinely new data, and many facing data contamination risks. These findings naturally motivate us to curate a new RLVR dataset, DAPO++, and to benchmark existing datasets from a lineage-aware perspective. To this end, we propose Source-level Counterfactual Attribution (SCA) as a guiding principle to curate a decontaminated training dataset with concentrated learning signals. Essentially, SCA measures a sample's marginal utility by comparing per-atomic-source RL checkpoints against a shared base model. Building upon these attribution signals, we further design a composite dataset quality score Q that strongly correlates with downstream RLVR performance. Experiments on Qwen3 series models verify that DAPO++ consistently improves performance on held-out benchmarks, while Q reliably predicts downstream RLVR training effectiveness. Our code and data is available at https://github.com/Celine-hxy/ATLAS.

Mechanistic interpretability seeks to understand the neural mechanisms that enable specific behaviors in Large Language Models (LLMs) by leveraging causality-based methods. While these approaches have identified neural circuits that copy spans of text, capture factual knowledge, and more, they remain unusable for multimodal models since adapting these tools to the vision-language domain requires considerable architectural changes. In this work, we adapt a unimodal causal tracing tool to BLIP to enable the study of the neural mechanisms underlying image-conditioned text generation. We demonstrate our approach on a visual question answering dataset, highlighting the causal relevance of later layer representations for all tokens. Furthermore, we release our BLIP causal tracing tool as open source to enable further experimentation in vision-language mechanistic interpretability by the community. Our code is available at https://github.com/vedantpalit/Towards-Vision-Language-Mechanistic-Interpretability.

Inverse path tracing has recently been applied to joint material and lighting estimation, given geometry and multi-view HDR observations of an indoor scene. However, it has two major limitations: path tracing is expensive to compute, and ambiguities exist between reflection and emission. Our Factorized Inverse Path Tracing (FIPT) addresses these challenges by using a factored light transport formulation and finds emitters driven by rendering errors. Our algorithm enables accurate material and lighting optimization faster than previous work, and is more effective at resolving ambiguities. The exhaustive experiments on synthetic scenes show that our method (1) outperforms state-of-the-art indoor inverse rendering and relighting methods particularly in the presence of complex illumination effects; (2) speeds up inverse path tracing optimization to less than an hour. We further demonstrate robustness to noisy inputs through material and lighting estimates that allow plausible relighting in a real scene. The source code is available at: https://github.com/lwwu2/fipt

Knowledge tracing (KT) is the problem of predicting students' future performance based on their historical interactions with intelligent tutoring systems. Recently, many works present lots of special methods for applying deep neural networks to KT from different perspectives like model architecture, adversarial augmentation and etc., which make the overall algorithm and system become more and more complex. Furthermore, due to the lack of standardized evaluation protocol liu2022pykt, there is no widely agreed KT baselines and published experimental comparisons become inconsistent and self-contradictory, i.e., the reported AUC scores of DKT on ASSISTments2009 range from 0.721 to 0.821 minn2018deep,yeung2018addressing. Therefore, in this paper, we provide a strong but simple baseline method to deal with the KT task named simpleKT. Inspired by the Rasch model in psychometrics, we explicitly model question-specific variations to capture the individual differences among questions covering the same set of knowledge components that are a generalization of terms of concepts or skills needed for learners to accomplish steps in a task or a problem. Furthermore, instead of using sophisticated representations to capture student forgetting behaviors, we use the ordinary dot-product attention function to extract the time-aware information embedded in the student learning interactions. Extensive experiments show that such a simple baseline is able to always rank top 3 in terms of AUC scores and achieve 57 wins, 3 ties and 16 loss against 12 DLKT baseline methods on 7 public datasets of different domains. We believe this work serves as a strong baseline for future KT research. Code is available at https://github.com/pykt-team/pykt-toolkitWe merged our model to the \textsc{pyKT benchmark at https://pykt.org/.}.

Recently, Neural Radiance Fields (NeRF) has exhibited significant success in novel view synthesis, surface reconstruction, etc. However, since no physical reflection is considered in its rendering pipeline, NeRF mistakes the reflection in the mirror as a separate virtual scene, leading to the inaccurate reconstruction of the mirror and multi-view inconsistent reflections in the mirror. In this paper, we present a novel neural rendering framework, named Mirror-NeRF, which is able to learn accurate geometry and reflection of the mirror and support various scene manipulation applications with mirrors, such as adding new objects or mirrors into the scene and synthesizing the reflections of these new objects in mirrors, controlling mirror roughness, etc. To achieve this goal, we propose a unified radiance field by introducing the reflection probability and tracing rays following the light transport model of Whitted Ray Tracing, and also develop several techniques to facilitate the learning process. Experiments and comparisons on both synthetic and real datasets demonstrate the superiority of our method. The code and supplementary material are available on the project webpage: https://zju3dv.github.io/Mirror-NeRF/.

Identifying significant references within the complex interrelations of a citation knowledge graph is challenging, which encompasses connections through citations, authorship, keywords, and other relational attributes. The Paper Source Tracing (PST) task seeks to automate the identification of pivotal references for given scholarly articles utilizing advanced data mining techniques. In the KDD CUP 2024, we design a recommendation-based framework tailored for the PST task. This framework employs the Neural Collaborative Filtering (NCF) model to generate final predictions. To process the textual attributes of the papers and extract input features for the model, we utilize SciBERT, a pre-trained language model. According to the experimental results, our method achieved a score of 0.37814 on the Mean Average Precision (MAP) metric, outperforming baseline models and ranking 11th among all participating teams. The source code is publicly available at https://github.com/MyLove-XAB/KDDCupFinal.

Claude Code is an agentic coding tool that can run shell commands, edit files, and call external services on behalf of the user. This study describes its comprehensive architecture by analyzing the publicly available TypeScript source code and further comparing it with OpenClaw, an independent open-source AI agent system that answers many of the same design questions from a different deployment context. Our analysis identifies five human values, philosophies, and needs that motivate the architecture (human decision authority, safety and security, reliable execution, capability amplification, and contextual adaptability) and traces them through thirteen design principles to specific implementation choices. The core of the system is a simple while-loop that calls the model, runs tools, and repeats. Most of the code, however, lives in the systems around this loop: a permission system with seven modes and an ML-based classifier, a five-layer compaction pipeline for context management, four extensibility mechanisms (MCP, plugins, skills, and hooks), a subagent delegation mechanism with worktree isolation, and append-oriented session storage. A comparison with OpenClaw, a multi-channel personal assistant gateway, shows that the same recurring design questions produce different architectural answers when the deployment context changes: from per-action safety classification to perimeter-level access control, from a single CLI loop to an embedded runtime within a gateway control plane, and from context-window extensions to gateway-wide capability registration. We finally identify six open design directions for future agent systems, grounded in recent empirical, architectural, and policy literature.

Neural Code Intelligence -- leveraging deep learning to understand, generate, and optimize code -- holds immense potential for transformative impacts on the whole society. Bridging the gap between Natural Language and Programming Language, this domain has drawn significant attention from researchers in both research communities over the past few years. This survey presents a systematic and chronological review of the advancements in code intelligence, encompassing over 50 representative models and their variants, more than 20 categories of tasks, and an extensive coverage of over 680 related works. We follow the historical progression to trace the paradigm shifts across different research phases (e.g., from modeling code with recurrent neural networks to the era of Large Language Models). Concurrently, we highlight the major technical transitions in models, tasks, and evaluations spanning through different stages. For applications, we also observe a co-evolving shift. It spans from initial endeavors to tackling specific scenarios, through exploring a diverse array of tasks during its rapid expansion, to currently focusing on tackling increasingly complex and varied real-world challenges. Building on our examination of the developmental trajectories, we further investigate the emerging synergies between code intelligence and broader machine intelligence, uncovering new cross-domain opportunities and illustrating the substantial influence of code intelligence across various domains. Finally, we delve into both the opportunities and challenges associated with this field, alongside elucidating our insights on the most promising research directions. An ongoing, dynamically updated project and resources associated with this survey have been released at https://github.com/QiushiSun/NCISurvey.

Large Language Models (LLMs) have shown impressive performance across a wide array of tasks involving both structured and unstructured textual data. Recent results on various benchmarks for code generation, repair, or completion suggest that certain models have programming abilities comparable to or even surpass humans. In this work, we demonstrate that high performance on such benchmarks does not correlate to humans' innate ability to understand structural control flow in code. To this end, we extract solutions from the HumanEval benchmark, which the relevant models perform strongly on, and trace their execution path using function calls sampled from the respective test set. Using this dataset, we investigate the ability of seven state-of-the-art LLMs to match the execution trace and find that, despite their ability to generate semantically identical code, they possess limited ability to trace execution paths, especially for longer traces and specific control structures. We find that even the top-performing model, Gemini, can fully and correctly generate only 47% of HumanEval task traces. Additionally, we introduce a subset for three key structures not contained in HumanEval: Recursion, Parallel Processing, and Object-Oriented Programming, including concepts like Inheritance and Polymorphism. Besides OOP, we show that none of the investigated models achieve an accuracy over 5% on the relevant traces. Aggregating these specialized parts with HumanEval tasks, we present Benchmark CoCoNUT: Code Control Flow for Navigation Understanding and Testing, which measures a model's ability to trace execution of code upon relevant calls, including advanced structural components. We conclude that current LLMs need significant improvement to enhance code reasoning abilities. We hope our dataset helps researchers bridge this gap.

We review thirteen generative systems and five supporting datasets for quantum circuit and quantum code generation, identified through a structured scoping review of Hugging Face, arXiv, and provenance tracing (January-February 2026). We organize the field along two axes: artifact type (Qiskit code, OpenQASM programs, circuit graphs); crossed with training regime (supervised fine-tuning, verifier-in-the-loop RL, diffusion/graph generation, agentic optimization); and systematically apply a three-layer evaluation framework covering syntactic validity, semantic correctness, and hardware executability. The central finding is that while all reviewed systems address syntax and most address semantics to some degree, none reports end-to-end evaluation on quantum hardware (Layer 3b), leaving a significant gap between generated circuits and practical deployment. Scope note: quantum code refers throughout to quantum program artifacts (QASM, Qiskit); we do not cover generation of quantum error-correcting codes (QEC).

Understanding and reasoning about code semantics is essential for enhancing code LLMs' abilities to solve real-world software engineering (SE) tasks. Although several code reasoning benchmarks exist, most rely on synthetic datasets or educational coding problems and focus on coarse-grained reasoning tasks such as input/output prediction, limiting their effectiveness in evaluating LLMs in practical SE contexts. To bridge this gap, we propose CodeSense, the first benchmark that makes available a spectrum of fine-grained code reasoning tasks concerned with the software engineering of real-world code. We collected Python, C and Java software projects from real-world repositories. We executed tests from these repositories, collected their execution traces, and constructed a ground truth dataset for fine-grained semantic reasoning tasks. We then performed comprehensive evaluations on state-of-the-art LLMs. Our results show a clear performance gap for the models to handle fine-grained reasoning tasks. Although prompting techniques such as chain-of-thought and in-context learning helped, the lack of code semantics in LLMs fundamentally limit models' capabilities of code reasoning. Besides dataset, benchmark and evaluation, our work produced an execution tracing framework and tool set that make it easy to collect ground truth for fine-grained SE reasoning tasks, offering a strong basis for future benchmark construction and model post training. Our code and data are located at https://codesense-bench.github.io/.

Repository summarization is a crucial research question in development and maintenance for software engineering. Existing repository summarization techniques primarily focus on summarizing code according to the directory tree, which is insufficient for tracing high-level features to the methods that collaboratively implement them. To address these limitations, we propose RepoSummary, a feature-oriented code repository summarization approach that simultaneously generates repository documentation automatically. Furthermore, it establishes more accurate traceability links from functional features to the corresponding code elements, enabling developers to rapidly locate relevant methods and files during code comprehension and maintenance. Comprehensive experiments against the state-of-the-art baseline (HGEN) demonstrate that RepoSummary achieves higher feature coverage and more accurate traceability. On average, it increases the rate of completely covered features in manual documentation from 61.2% to 71.1%, improves file-level traceability recall from 29.9% to 53.0%, and generates documentation that is more conceptually consistent, easier to understand, and better formatted than that produced by existing approaches.

LLMs are transforming software development, yet current code generation and code repair benchmarks mainly assess syntactic and functional correctness in simple, single-error cases. LLMs' capabilities to autonomously find and fix runtime logical errors in complex data science code remain largely unexplored. To address this gap, we introduce DSDBench: the Data Science Debugging Benchmark, the first benchmark for systematic evaluation of LLMs on multi-hop error tracing and multi-bug detection in data science code debugging. DSDBench adapts datasets from existing data science task benchmarks, such as DABench and MatPlotBench, featuring realistic data science debugging tasks with automatically synthesized multi-hop, multi-bug code snippets. DSDBench includes 1,117 annotated samples with 741 cause-effect error pairs and runtime error messages. Evaluations of state-of-the-art LLMs on DSDBench show significant performance gaps, highlighting challenges in debugging logical runtime errors in data science code. DSDBench offers a crucial resource to evaluate and improve LLMs' debugging and reasoning capabilities, enabling more reliable AI-assisted data science in the future. DSDBench is publicly available at github.com/KevinCL16/DSDBench.

As LLMs are increasingly used as judges in code applications, they should be evaluated in realistic interactive settings that capture partial context and ambiguous intent. We present TRACE (Tool for Rubric Analysis in Code Evaluation), a framework that evaluates LLM judges' ability to predict human preferences and automatically extracts rubric items to reveal systematic biases in how humans and models weigh each item. Across three modalities -- chat-based programming, IDE autocompletion, and instructed code editing -- we use TRACE to measure how well LLM judges align with developer preferences. Among 13 different models, the best judges underperform human annotators by 12-23%. TRACE identifies 35 significant sources of misalignment between humans and judges across interaction modalities, the majority of which correspond to existing software engineering code quality criteria. For example, in chat-based coding, judges are biased towards longer code explanations while humans prefer shorter ones. We find significant misalignment on the majority of existing code quality dimensions, showing alignment gaps between LLM judges and human preference in realistic coding applications.

We study auto research as a closed empirical loop driven by external measurement. Each submitted trial carries a hypothesis, an executable code edit, an evaluator-owned outcome, and feedback that shapes the next proposal. The output is not a generated paper or a single model checkpoint, but an auditable trajectory of proposals, code diffs, experiments, scores, and failure labels. We instantiate this loop with specialist agents that partition recipe surfaces and share measured lineage across trials. The central empirical finding is that lineage feedback lets agents turn evaluator outcomes, including crashes, budget overruns, size failures, and accuracy-gate misses, into later program-level recipe edits rather than one-shot suggestions. Across 1,197 headline-run trials plus 600 Parameter Golf control trials after one-time setup and launch, humans did not choose proposals, edit recipes, override scores, or repair failed trials during the search. In the three headline runs, the same submitted-trial loop reduces Parameter Golf validation bpb by 0.81%, raises NanoChat-D12 CORE by 38.7%, and reduces CIFAR-10 Airbench96 wallclock by 4.59%, with each task measured by its own external evaluator and legality checks. The trace includes a strict architecture-domain audit of 157 headline-run submissions and program rewrites such as a NanoChat attention-kernel path change. Within this scope the loop autonomously writes code, submits experiments, absorbs feedback, applies and combines known techniques inside each environment, and improves public starting recipes.

Users rely on execution traces to observe agent behavior, diagnose failures, and ensure accountability. These traces contain rich procedural detail, including tool invocations, intermediate decisions, and error-recovery logic. Yet this detail can expose private procedural skills, allowing downstream methods to recover key formulas, thresholds, and strategies without access to model weights or skill files. To quantify this risk and evaluate protection, we construct CapTraceBench, a benchmark of 75 specialized long-horizon tasks and 154 curated skills across seven domains. We also introduce RedAct https://github.com/XuShuwenn/RedAct, a protected trace release framework that localizes protected key information, rewrites traces while preserving verifier-critical evidence, and embeds behavioral watermarks for downstream provenance analysis. Across representative trace reuse methods, RedAct reduces normalized skill transfer (NST) from 44.7--67.1\% on raw traces to below the no-skill baseline, while preserving audit evidence. Its standalone behavioral watermarks reach 93.6--100.0\% true detection with a false alarm rate of at most 1.9\%. These results frame public agent traces as security interfaces and show that selective redaction can reduce procedural capability leakage without removing audit evidence.

Software traceability establishes and leverages associations between diverse development artifacts. Researchers have proposed the use of deep learning trace models to link natural language artifacts, such as requirements and issue descriptions, to source code; however, their effectiveness has been restricted by availability of labeled data and efficiency at runtime. In this study, we propose a novel framework called Trace BERT (T-BERT) to generate trace links between source code and natural language artifacts. To address data sparsity, we leverage a three-step training strategy to enable trace models to transfer knowledge from a closely related Software Engineering challenge, which has a rich dataset, to produce trace links with much higher accuracy than has previously been achieved. We then apply the T-BERT framework to recover links between issues and commits in Open Source Projects. We comparatively evaluated accuracy and efficiency of three BERT architectures. Results show that a Single-BERT architecture generated the most accurate links, while a Siamese-BERT architecture produced comparable results with significantly less execution time. Furthermore, by learning and transferring knowledge, all three models in the framework outperform classical IR trace models. On the three evaluated real-word OSS projects, the best T-BERT stably outperformed the VSM model with average improvements of 60.31% measured using Mean Average Precision (MAP). RNN severely underperformed on these projects due to insufficient training data, while T-BERT overcame this problem by using pretrained language models and transfer learning.

Recent advances in reinforcement learning for code generation have made robust environments essential to prevent reward hacking. As LLMs increasingly serve as evaluators in code-based RL, their ability to detect reward hacking remains understudied. In this paper, we propose a novel taxonomy of reward exploits spanning across 54 categories and introduce TRACE (Testing Reward Anomalies in Code Environments), a synthetically curated and human-verified benchmark containing 517 testing trajectories. Unlike prior work that evaluates reward hack detection in isolated classification scenarios, we contrast these evaluations with a more realistic, contrastive anomaly detection setup on TRACE. Our experiments reveal that models capture reward hacks more effectively in contrastive settings than in isolated classification settings, with GPT-5.2 with highest reasoning mode achieving the best detection rate at 63%, up from 45% in isolated settings on TRACE. Building on this insight, we demonstrate that state-of-the-art models struggle significantly more with semantically contextualized reward hacks compared to syntactically contextualized ones. We further conduct qualitative analyses of model behaviors, as well as ablation studies showing that the ratio of benign to hacked trajectories and analysis cluster sizes substantially impact detection performance. We release the benchmark and evaluation harness to enable the community to expand TRACE and evaluate their models.

Coding agents are rapidly becoming a major application of agentic LLMs, but serving them efficiently remains challenging. Progress on this challenge requires understanding real workload patterns, yet the data needed for such analysis is largely absent. Existing public traces and benchmarks do not capture real, day-to-day coding-agent usage across multiple agents and model families for serving-system analysis. To help fill this gap, we collect and release a trace of roughly 4,300 coding-agent sessions, containing about 350,000 LLM steps and 430,000 tool calls from our own day-to-day use of Claude Code and Codex. Our analysis shows that coding-agent workloads feature long autonomous loops, long contexts with short outputs, diverse and heavily-tailed tool calls, and high but imperfect prefix cache hit rates. These findings point to concrete opportunities for optimizing serving, including lower-overhead tool calling, append-length-aware prefill, semantic-aware tool-latency prediction, and improved KV-cache management around human-paced gaps. We release the dataset, trace collection pipeline, and analysis code at https://github.com/uw-syfi/TraceLab.git the project website is https://tracelab.cs.washington.edu.

Large language models (LLMs) for code completion and generation are increasingly used in software development, yet they may reproduce training examples verbatim and without authorship attribution, raising legal and ethical concerns around plagiarism and license compliance. Classical fingerprint-based plagiarism detectors based on fingerprinting, such as Winnowing, remain highly effective, yet the inspection requires comparing fragments of code to the entire training set, and their linear-time search makes them impractical for the billion-scale corpora used to train modern code LLMs. To bridge this gap, we introduce SOURCETRACKER, a 300M-parameter encoder tailored for code retrieval, together with a hybrid two-stage provenance-tracking pipeline HYBRIDSOURCETRACKER (HST). HST first narrows down a small set of candidate snippets via vector search, then re-ranks those candidates using Winnowing on exact fingerprints. We train and evaluate our system on a 10M-snippet subset of the THESTACKV2 dataset, with both verbatim and adapted snippets that emulate realistic identifier renaming. On an in vitro 100k-snippet search space with adapted queries, our hybrid approach reaches a mean reciprocal rank on par with Winnowing for 30-token fragments. Then, starting from windows >= 60 tokens, it consistently over-performs by up to 5.4% while preserving logarithmic-time query complexity. In a complementary evaluation using an LLM-based judge, we find that many retrieved snippets not labeled as ground truth are still highly similar to the expected sources, particularly with longer context windows, and thus remain useful for end users. Overall, our results demonstrate that integrating vector search with fingerprinting enables scalable, high-precision provenance tracking for code produced by LLMs.

We study a class of optimization problems motivated by automating the design and update of AI systems like coding assistants, robots, and copilots. We propose an end-to-end optimization framework, Trace, which treats the computational workflow of an AI system as a graph akin to neural networks, based on a generalization of back-propagation. Optimization of computational workflows often involves rich feedback (e.g. console output or user's responses), heterogeneous parameters (e.g. prompts, hyper-parameters, codes), and intricate objectives (beyond maximizing a score). Moreover, its computation graph can change dynamically with the inputs and parameters. We frame a new mathematical setup of iterative optimization, Optimization with Trace Oracle (OPTO), to capture and abstract these properties so as to design optimizers that work across many domains. In OPTO, an optimizer receives an execution trace along with feedback on the computed output and updates parameters iteratively. Trace is the tool to implement OPTO in practice. Trace has a Python interface that efficiently converts a computational workflow into an OPTO instance using a PyTorch-like interface. Using Trace, we develop a general-purpose LLM-based optimizer called OptoPrime that can effectively solve OPTO problems. In empirical studies, we find that OptoPrime is capable of first-order numerical optimization, prompt optimization, hyper-parameter tuning, robot controller design, code debugging, etc., and is often competitive with specialized optimizers for each domain. We believe that Trace, OptoPrime and the OPTO framework will enable the next generation of interactive agents that automatically adapt using various kinds of feedback. Website: https://microsoft.github.io/Trace

AI coding agents are reshaping software development through both autonomous and human-mediated pull requests (PRs). When developers use AI agents to generate code under their own accounts, code authorship attribution becomes critical for repository governance, research validity, and understanding modern development practices. We present the first study on fingerprinting AI coding agents, analyzing 33,580 PRs from five major agents (OpenAI Codex, GitHub Copilot, Devin, Cursor, Claude Code) to identify behavioral signatures. With 41 features spanning commit messages, PR structure, and code characteristics, we achieve 97.2% F1-score in multi-class agent identification. We uncover distinct fingerprints: Codex shows unique multiline commit patterns (67.5% feature importance), and Claude Code exhibits distinctive code structure (27.2% importance of conditional statements). These signatures reveal that AI coding tools produce detectable behavioral patterns, suggesting potential for identifying AI contributions in software repositories.

Existing code reasoning methods primarily supervise final code outputs, ignoring intermediate states, often leading to reward hacking where correct answers are obtained through inconsistent reasoning. We propose StepCodeReasoner, a framework that introduces explicit intermediate execution-state supervision. By automatically inserting structured print-based execution-trace anchors into code, the model is trained to predict runtime states at each step, transforming code reasoning into a verifiable, stepwise execution modeling problem. Building on this execution-aware method, we introduce Bi-Level GRPO, a reinforcement learning algorithm for structured credit assignment at two levels: inter-trajectory, comparing alternative execution paths, and intra-trajectory, rewarding intermediate accuracy based on its impact on downstream correctness. Extensive experiments demonstrate that StepCodeReasoner achieves SOTA performance in code reasoning. In particular, our 7B model achieves 91.1\% on CRUXEval and 86.5\% on LiveCodeBench, outperforming the CodeReasoner-7B baseline (86.0\% and 77.7\%) and GPT-4o (85.6\% and 75.1\%). Furthermore, on the execution-trace benchmark REval, our model scores 82.9\%, outperforming baseline CodeReasoner-7B (72.3\%), its 14B counterpart (81.1\%), and GPT-4o (77.3\%). Additionally, our approach also improves code generation performance, demonstrating that explicit execution modeling enhances both code reasoning and code generation.

Software requirements traceability is a critical component of the software engineering process, enabling activities such as requirements validation, compliance verification, and safety assurance. However, the cost and effort of manually creating a complete set of trace links across natural language artifacts such as requirements, design, and test-cases can be prohibitively expensive. Researchers have therefore proposed automated link-generation solutions primarily based on information-retrieval (IR) techniques; however, these solutions have failed to deliver the accuracy needed for full adoption in industrial projects. Improvements can be achieved using deep-learning traceability models; however, their efficacy is impeded by the limited size and availability of project-level artifacts and links to serve as training data. In this paper, we address this problem by proposing and evaluating several deep-learning approaches for text-to-text traceability. Our method, named NLTrace, explores three transfer learning strategies that use datasets mined from open world platforms. Through pretraining Language Models (LMs) and leveraging adjacent tracing tasks, we demonstrate that NLTrace can significantly improve the performance of LM based trace models when training links are available. In such scenarios NLTrace outperforms the best performing classical IR method with an 188% improvement in F2 score and 94.01% in Mean Average Precision (MAP). It also outperforms the general LM based trace model by 7% and 23% for F2 and MAP respectively. In addition, NLTrace can adapt to low-resource tracing scenarios where other LM models can not. The knowledge learned from adjacent tasks enables NLTrace to outperform VSM models by 28% F2 on generation challenges when presented with a small number of training examples.

Interactive LLM agents are becoming part of daily work, but they do not reliably become easier to work with over time: a correction remembered in one session may still be violated in the next. We study this gap between preference access and preference compliance. In tasks derived from anonymized real-user friction cases, Mem0 memory still leaves 57.5% of applicable preference checks violated. We introduce Test-time Rule Acquisition and Compiled Enforcement (TRACE), a drop-in skill-layer pipeline for coding-agent runtimes that mines user corrections, rewrites them as atomic rules, and compiles them into runtime checks that must pass before an agent completes future tasks. Unlike runtime checks written ahead of time by developers, TRACE skills come from the user's own chat corrections. We evaluate TRACE with simulated user-in-the-loop experiments on ClawArena coding-agent tasks and MemoryArena-derived memory-intensive tasks. On ClawArena, TRACE reduces held-out preference violation from 100.0% to 37.6% on in-distribution tasks and from 100.0% to 2.0% on out-of-distribution tasks. On MemoryArena-derived tasks, TRACE reduces in-distribution violation from 100.0% to 60.5% while matching or exceeding the strongest memory baseline on task pass. These results suggest that compiling corrections into runtime enforcement can address a repeated-friction failure mode that memory alone does not reliably solve, reducing the need for users to restate the same correction across future sessions. Experiment code is available at https://github.com/YujunZhou/TRACE_exp, and the deployable skill is available at https://github.com/YujunZhou/tellonce.

Pre-training on raw code teaches syntax but provides sparse signal for diverse real-world task formats. While synthetic data has proven transformative for language models, code remains largely unexplored beyond limited quality improvements. We present CodeAlchemy, a synthetic data generation framework that transforms publicly sourced code into semantically-rich training data through 5 strategies: CodeEnhance (quality-aware rewriting), CodeQA (template-based problems), CodeDev (developer tasks), CodeDialogue (multi-turn conversations), and CodeTrace (execution traces). We process 3 corpora across 15 languages to generate 500B+ tokens of synthetic data plus 350B reasoning tokens, orders of magnitude more than prior efforts. CodeTrace instruments and executes 1.3M+ files across 14 languages and 5K libraries, capturing control flow, state tracking, and library knowledge. We introduce DevEval (developer tasks) and TraceEval (execution prediction) benchmarks; frontier models like Claude Sonnet 4.5 achieve only 5.6% exact match on TraceEval, revealing critical gaps in semantic understanding. Our 3B models achieve 83.5% on HumanEval, 63.2% on MBPP, 8.09% win rate on DevEval, and 15.36 ROUGE-2 on TraceEval, outperforming frontier models 10x the size including 27B Gemma-3 and 32B Granite-4.0.

OpenLanguageModel (OLM) is an open-source PyTorch library for building and pretraining small language models while keeping their machinery visible. In OLM, model code reads like the architecture: components are ordinary modules, while Block, Residual, Repeat, and Parallel describe how they are wired. The resulting model can move unchanged from a teaching notebook to a complete pretraining run or a research ablation. OLM connects this readable model layer to tokenizers, local and streaming datasets, optimization, mixed precision, callbacks, checkpoints, and hardware-aware CPU, single-GPU, and single-node multi-GPU execution. We demonstrate the full path by tracing GPT-2 from diagram to code, launching a FineWeb-Edu training script, replacing one attention component, and letting AutoTrainer configure the available machine. The package includes 27 presets across nine familiar model families and documentation that progresses from LM fundamentals to architecture research. Validation shows close agreement with independent reference implementations, 90.6% four-GPU weak-scaling efficiency for a 348M-parameter workload, compact architecture edits, and positive early usability results. OLM is MIT-licensed and available through PyPI, GitHub, and its documentation site.

A key strength of managed runtimes over hardware is the ability to gain detailed insight into the dynamic execution of programs with instrumentation. Analyses such as code coverage, execution frequency, tracing, and debugging, are all made easier in a virtual setting. As a portable, low-level bytecode, WebAssembly offers inexpensive in-process sandboxing with high performance. Yet to date, Wasm engines have not offered much insight into executing programs, supporting at best bytecode-level stepping and basic source maps, but no instrumentation capabilities. In this paper, we show the first non-intrusive dynamic instrumentation system for WebAssembly in the open-source Wizard Research Engine. Our innovative design offers a flexible, complete hierarchy of instrumentation primitives that support building high-level, complex analyses in terms of low-level, programmable probes. In contrast to emulation or machine code instrumentation, injecting probes at the bytecode level increases expressiveness and vastly simplifies the implementation by reusing the engine's JIT compiler, interpreter, and deoptimization mechanism rather than building new ones. Wizard supports both dynamic instrumentation insertion and removal while providing consistency guarantees, which is key to composing multiple analyses without interference. We detail a fully-featured implementation in a high-performance multi-tier Wasm engine, show novel optimizations specifically designed to minimize instrumentation overhead, and evaluate performance characteristics under load from various analyses. This design is well-suited for production engine adoption as probes can be implemented to have no impact on production performance when not in use.

Modern software infrastructure increasingly relies on LLM agents for development and maintenance, such as Claude Code and Gemini-cli. However, these AI agents differ fundamentally from traditional deterministic software, posing a significant challenge to conventional monitoring and debugging. This creates a critical semantic gap: existing tools observe either an agent's high-level intent (via LLM prompts) or its low-level actions (e.g., system calls), but cannot correlate these two views. This blindness makes it difficult to distinguish between benign operations, malicious attacks, and costly failures. We introduce AgentSight, an AgentOps observability framework that bridges this semantic gap using a hybrid approach. Our approach, boundary tracing, monitors agents from outside their application code at stable system interfaces using eBPF. AgentSight intercepts TLS-encrypted LLM traffic to extract semantic intent, monitors kernel events to observe system-wide effects, and causally correlates these two streams across process boundaries using a real-time engine and secondary LLM analysis. This instrumentation-free technique is framework-agnostic, resilient to rapid API changes, and incurs less than 3% performance overhead. Our evaluation shows AgentSight detects prompt injection attacks, identifies resource-wasting reasoning loops, and reveals hidden coordination bottlenecks in multi-agent systems. AgentSight is released as an open-source project at https://github.com/agent-sight/agentsight.

We consider the task of mapping pseudocode to long programs that are functionally correct. Given test cases as a mechanism to validate programs, we search over the space of possible translations of the pseudocode to find a program that passes the validation. However, without proper credit assignment to localize the sources of program failures, it is difficult to guide search toward more promising programs. We propose to perform credit assignment based on signals from compilation errors, which constitute 88.7% of program failures. Concretely, we treat the translation of each pseudocode line as a discrete portion of the program, and whenever a synthesized program fails to compile, an error localization method tries to identify the portion of the program responsible for the failure. We then focus search over alternative translations of the pseudocode for those portions. For evaluation, we collected the SPoC dataset (Search-based Pseudocode to Code) containing 18,356 programs with human-authored pseudocode and test cases. Under a budget of 100 program compilations, performing search improves the synthesis success rate over using the top-one translation of the pseudocode from 25.6% to 44.7%.

Scientific research based on multimodal clinical data (including medical imaging) requires coordinating clinical, radiological, programming, and biostatistical expertise, a fragmented process that bottlenecks discovery. We present VERITAS (Verifiable Epistemic Reasoning for Image-Derived Hypothesis Testing via Agentic Systems), a clinical co-scientist: a multi-agent system that autonomously tests natural-language hypotheses and produces a fully auditable evidence trail, tracing every conclusion through executable outputs from analysis plan to segmentation masks to statistical code to final verdict. Unlike prior AI-scientist systems, which mainly operate on tabular or text data, VERITAS grounds autonomous discovery directly in medical images. It decomposes the workflow into four phases handled by role-specialized agents, and introduces an epistemic evidence label framework that mechanically classifies outcomes as Supported, Refuted, Underpowered, or Invalid by jointly evaluating significance, effect direction, and study power. This distinction is critical in medical imaging, where non-significant results often reflect insufficient sample size rather than absent effects. We construct a tiered benchmark of 64 hypotheses spanning six complexity levels across cardiac and brain glioma MRI datasets. VERITAS reaches 81.4% verdict accuracy with frontier models and 71.2% with locally-hosted open-weight models (8-30B), outperforming all single-model baselines in both classes. It also produces the highest rate of independently verifiable statistical outputs (86.6%), so even its failures remain diagnosable through artifact inspection. Structured multi-agent decomposition thus substitutes for model scale while preserving the verifiability that scientific discovery demands. We release code, hypothesis bank, and evaluation pipeline at https://github.com/LucZot/veritas.

Large language model (LLM)-based coding assistants have made substantial progress, yet most systems remain reactive, requiring developers to explicitly formulate their needs. Proactive coding assistants aim to infer latent developer intent from integrated development environment (IDE) interactions and repository context, thereby reducing interaction overhead and supporting more seamless assistance. However, research in this direction is limited by the scarcity of large-scale real-world developer behavior data. Existing studies therefore often rely on LLM-simulated IDE traces, whose fidelity to real development behavior remains unclear. In this paper, we investigate this simulation-to-reality gap through a large-scale empirical study. We collect real IDE interaction traces from 1{,}246 experienced industry developers over three consecutive days using a custom Visual Studio Code extension, and construct paired LLM-simulated traces for controlled comparison. Our analysis shows that simulated traces differ substantially from real traces in behavioral diversity, temporal structure, and exploratory patterns. Based on the collected data, we introduce ProCodeBench, a real-world benchmark for proactive intent prediction. Experiments with representative LLMs, retrieval-augmented methods, and agentic baselines show that current approaches remain far from reliable under real IDE traces, suggesting that simulation-based evaluation can overestimate real-world performance. Finally, our training study shows that simulated data cannot replace real data, but can complement it when used before real-world fine-tuning. These findings highlight the importance of real developer behavior data for evaluating and training proactive coding assistants.

Code search is an important task that has seen many developments in recent years. However, previous attempts have mostly considered the problem of searching for code by a text query. We argue that using a code snippet (and possibly an associated traceback) as a query and looking for answers with bugfixing instructions and code samples is a natural use case that is not covered by existing approaches. Moreover, existing datasets use comments extracted from code rather than full-text descriptions as text, making them unsuitable for this use case. We present a new SearchBySnippet dataset implementing the search-by-code use case based on StackOverflow data; it turns out that in this setting, existing architectures fall short of the simplest BM25 baseline even after fine-tuning. We present a new single encoder model SnippeR that outperforms several strong baselines on the SearchBySnippet dataset with a result of 0.451 Recall@10; we propose the SearchBySnippet dataset and SnippeR as a new important benchmark for code search evaluation.

Establishing precise traceability between embedded systems datasheets and their corresponding code implementations remains a fundamental challenge in systems engineering, particularly for low-level software where manual mapping between specification documents and large code repositories is infeasible. Existing Traceability Link Recovery approaches primarily rely on lexical similarity and information retrieval techniques, which struggle to capture the semantic, structural, and symbol level relationships prevalent in embedded systems software. We present a hierarchical datasheet-to-code mapping methodology that employs large language models for semantic analysis while explicitly structuring the traceability process across multiple abstraction levels. Rather than performing direct specification-to-code matching, the proposed approach progressively narrows the search space through repository-level structure inference, file-level relevance estimation, and fine-grained symbollevel alignment. The method extends beyond function-centric mapping by explicitly covering macros, structs, constants, configuration parameters, and register definitions commonly found in systems-level C/C++ codebases. We evaluate the approach on multiple open-source embedded systems repositories using manually curated datasheet-to-code ground truth. Experimental results show substantial improvements over traditional information-retrieval-based baselines, achieving up to 73.3% file mapping accuracy. We significantly reduce computational overhead, lowering total LLM token consumption by 84% and end-to-end runtime by approximately 80%. This methodology supports automated analysis of large embedded software systems and enables downstream applications such as training data generation for systems-aware machine learning models, standards compliance verification, and large-scale specification coverage analysis.

Code pre-trained models (CodePTMs) have recently demonstrated significant success in code intelligence. To interpret these models, some probing methods have been applied. However, these methods fail to consider the inherent characteristics of codes. In this paper, to address the problem, we propose a novel probing method CAT-probing to quantitatively interpret how CodePTMs attend code structure. We first denoise the input code sequences based on the token types pre-defined by the compilers to filter those tokens whose attention scores are too small. After that, we define a new metric CAT-score to measure the commonality between the token-level attention scores generated in CodePTMs and the pair-wise distances between corresponding AST nodes. The higher the CAT-score, the stronger the ability of CodePTMs to capture code structure. We conduct extensive experiments to integrate CAT-probing with representative CodePTMs for different programming languages. Experimental results show the effectiveness of CAT-probing in CodePTM interpretation. Our codes and data are publicly available at https://github.com/nchen909/CodeAttention.

Applied Behavior Analysis (ABA) is a clinical discipline whose documentation, teaching programs and multi-session behavioral logs, is formulaic and high-volume, yet real session data is HIPAA-protected and bound by professional confidentiality rules, blocking the release of a training corpus. We present TRACE (Taxonomy-Referenced ABA Clinical Examples), a 2,999-example synthetic instruction-tuning dataset covering two ABA tasks: teaching-program generation across Discrete Trial Training, Natural Environment Teaching, and Task Analysis; and multi-session behavioral interpretation across twelve trajectory patterns and thirteen target behaviors. Every example is produced by a deterministic taxonomy-driven generator grounded in the canonical ABA literature, and every example carries complete sampling provenance, the exact taxonomy cells that produced it. The dataset is released under CC BY-NC 4.0 for data and MIT for code, with stratified train (2,549), validation (149), test (281), and sanity (20) splits. TRACE is a research artifact and has not been clinically validated.

A typical approach to programming is to first code the main execution scenario, and then focus on filling out alternative behaviors and corner cases. But, almost always, there exist unusual conditions that trigger atypical behaviors, which are hard to predict in program specifications, and are thus often not coded. In this paper, we consider the problem of detecting and recommending such missing behaviors, a task that we call code sophistication. Previous research on coding assistants usually focuses on recommending code fragments based on specifications of the intended behavior. In contrast, code sophistication happens in the absence of a specification, aiming to help developers complete the logic of their programs with missing and unspecified behaviors. We outline the research challenges to this problem and present early results showing how program logic can be completed by leveraging code structure and information about the usage of input parameters.

Deep neural networks are vulnerable to adversarial attacks. In this paper, we take the role of investigators who want to trace the attack and identify the source, that is, the particular model which the adversarial examples are generated from. Techniques derived would aid forensic investigation of attack incidents and serve as deterrence to potential attacks. We consider the buyers-seller setting where a machine learning model is to be distributed to various buyers and each buyer receives a slightly different copy with same functionality. A malicious buyer generates adversarial examples from a particular copy M_i and uses them to attack other copies. From these adversarial examples, the investigator wants to identify the source M_i. To address this problem, we propose a two-stage separate-and-trace framework. The model separation stage generates multiple copies of a model for a same classification task. This process injects unique characteristics into each copy so that adversarial examples generated have distinct and traceable features. We give a parallel structure which embeds a ``tracer'' in each copy, and a noise-sensitive training loss to achieve this goal. The tracing stage takes in adversarial examples and a few candidate models, and identifies the likely source. Based on the unique features induced by the noise-sensitive loss function, we could effectively trace the potential adversarial copy by considering the output logits from each tracer. Empirical results show that it is possible to trace the origin of the adversarial example and the mechanism can be applied to a wide range of architectures and datasets.

Evaluating open-ended outputs from large language models (LLMs) remains challenging due to the absence of ground truth. Existing metrics rely on final-answer accuracy or surface-level statistics, leaving the reasoning process itself unexamined. We introduce TRACE (Toulmin-based Reasoning Assessment through Constructive Elements), a metric that analyzes Chain-of-Thought (CoT) reasoning processes. Rather than judging outcomes, TRACE inspects how arguments are constructed by integrating Toulmin's argumentation theory with Flavell's metacognitive framework to assess reasoning structure. Experiments on 26.3K QA samples across 7 reasoning models show strong correlation with benchmark accuracy (r=0.74). Furthermore, TRACE is effective as a reinforcement learning reward signal, outperforming accuracy-only baselines. Together, these results indicate that logically sound reasoning leads to higher-quality answers. TRACE thus serves as a complementary metric for evaluating open-ended outputs. Code is available at https://github.com/hyyangkisti/trace.

We present SuperCoder2.0, an advanced autonomous system designed to enhance software development through artificial intelligence. The system combines an AI-native development approach with intelligent agents to enable fully autonomous coding. Key focus areas include a retry mechanism with error output traceback, comprehensive code rewriting and replacement using Abstract Syntax Tree (ast) parsing to minimize linting issues, code embedding technique for retrieval-augmented generation, and a focus on localizing methods for problem-solving rather than identifying specific line numbers. The methodology employs a three-step hierarchical search space reduction approach for code base navigation and bug localization:utilizing Retrieval Augmented Generation (RAG) and a Repository File Level Map to identify candidate files, (2) narrowing down to the most relevant files using a File Level Schematic Map, and (3) extracting 'relevant locations' within these files. Code editing is performed through a two-part module comprising CodeGeneration and CodeEditing, which generates multiple solutions at different temperature values and replaces entire methods or classes to maintain code integrity. A feedback loop executes repository-level test cases to validate and refine solutions. Experiments conducted on the SWE-bench Lite dataset demonstrate SuperCoder2.0's effectiveness, achieving correct file localization in 84.33% of cases within the top 5 candidates and successfully resolving 34% of test instances. This performance places SuperCoder2.0 fourth globally on the SWE-bench leaderboard. The system's ability to handle diverse repositories and problem types highlights its potential as a versatile tool for autonomous software development. Future work will focus on refining the code editing process and exploring advanced embedding models for improved natural language to code mapping.

Predicting program behavior without execution is an essential and challenging task in software engineering. Traditional models often struggle to capture dynamic dependencies and interactions within code. This paper introduces a novel machine learning-based framework called CodeFlowrepresents, which predicts code coverage and detects runtime errors through Dynamic Dependencies Learning. Utilizing control flow graphs (CFGs), CodeFlowrepresents all possible execution paths and the relationships between different statements, offering a comprehensive understanding of program behavior. It constructs CFGs to depict execution paths and learns vector representations for CFG nodes, capturing static control-flow dependencies. Additionally, it learns dynamic dependencies through execution traces, which reflect the impacts among statements during execution. This approach enables accurate prediction of code coverage and identification of runtime errors. Empirical evaluations show significant improvements in code coverage prediction accuracy and effective localization of runtime errors, surpassing current models.

Knowledge tracing is the task of modeling each student's mastery of knowledge concepts (KCs) as (s)he engages with a sequence of learning activities. Each student's knowledge is modeled by estimating the performance of the student on the learning activities. It is an important research area for providing a personalized learning platform to students. In recent years, methods based on Recurrent Neural Networks (RNN) such as Deep Knowledge Tracing (DKT) and Dynamic Key-Value Memory Network (DKVMN) outperformed all the traditional methods because of their ability to capture complex representation of human learning. However, these methods face the issue of not generalizing well while dealing with sparse data which is the case with real-world data as students interact with few KCs. In order to address this issue, we develop an approach that identifies the KCs from the student's past activities that are relevant to the given KC and predicts his/her mastery based on the relatively few KCs that it picked. Since predictions are made based on relatively few past activities, it handles the data sparsity problem better than the methods based on RNN. For identifying the relevance between the KCs, we propose a self-attention based approach, Self Attentive Knowledge Tracing (SAKT). Extensive experimentation on a variety of real-world dataset shows that our model outperforms the state-of-the-art models for knowledge tracing, improving AUC by 4.43% on average.

Large language models have catalyzed an unprecedented wave in code generation. While achieving significant advances, they blur the distinctions between machine- and human-authored source code, causing integrity and authenticity issues of software artifacts. Previous methods such as DetectGPT have proven effective in discerning machine-generated texts, but they do not identify and harness the unique patterns of machine-generated code. Thus, its applicability falters when applied to code. In this paper, we carefully study the specific patterns that characterize machine- and human-authored code. Through a rigorous analysis of code attributes such as lexical diversity, conciseness, and naturalness, we expose unique patterns inherent to each source. We particularly notice that the syntactic segmentation of code is a critical factor in identifying its provenance. Based on our findings, we propose DetectCodeGPT, a novel method for detecting machine-generated code, which improves DetectGPT by capturing the distinct stylized patterns of code. Diverging from conventional techniques that depend on external LLMs for perturbations, DetectCodeGPT perturbs the code corpus by strategically inserting spaces and newlines, ensuring both efficacy and efficiency. Experiment results show that our approach significantly outperforms state-of-the-art techniques in detecting machine-generated code.

Detecting code clones is relevant to software maintenance and code refactoring. This challenge still presents unresolved cases, mainly when structural similarity does not reflect functional equivalence, though recent code models show promise. Therefore, this research aims to systematically measure the performance of several newly introduced small code models in classifying code pairs as clones or non-clones. The evaluation is based on five datasets: BigCloneBench, CodeJam, Karnalim, POJ104, and PoolC, as well as six code models: CodeBERT, GraphCodeBERT, Salesforce T5, UniXCoder, PLBART, and Polycoder. Most models performed well across standard metrics, including accuracy, precision, recall, and F1-score. However, a marginal fraction of clones remains challenging to detect, especially when the code looks similar but performs different operations. The source code that illustrates our approach is available at: https://github.com/jorge-martinez-gil/small-code-models

Recently, deep learning techniques have shown great success in automatic code generation. Inspired by the code reuse, some researchers propose copy-based approaches that can copy the content from similar code snippets to obtain better performance. Practically, human developers recognize the content in the similar code that is relevant to their needs, which can be viewed as a code sketch. The sketch is further edited to the desired code. However, existing copy-based approaches ignore the code sketches and tend to repeat the similar code without necessary modifications, which leads to generating wrong results. In this paper, we propose a sketch-based code generation approach named SkCoder to mimic developers' code reuse behavior. Given a natural language requirement, SkCoder retrieves a similar code snippet, extracts relevant parts as a code sketch, and edits the sketch into the desired code. Our motivations are that the extracted sketch provides a well-formed pattern for telling models "how to write". The post-editing further adds requirement-specific details to the sketch and outputs the complete code. We conduct experiments on two public datasets and a new dataset collected by this work. We compare our approach to 20 baselines using 5 widely used metrics. Experimental results show that (1) SkCoder can generate more correct programs, and outperforms the state-of-the-art - CodeT5-base by 30.30%, 35.39%, and 29.62% on three datasets. (2) Our approach is effective to multiple code generation models and improves them by up to 120.1% in Pass@1. (3) We investigate three plausible code sketches and discuss the importance of sketches. (4) We manually evaluate the generated code and prove the superiority of our SkCoder in three aspects.

A fundamental skill among human developers is the ability to understand and reason about program execution. As an example, a programmer can mentally simulate code execution in natural language to debug and repair code (aka. rubber duck debugging). However, large language models (LLMs) of code are typically trained on the surface textual form of programs, thus may lack a semantic understanding of how programs execute at run-time. To address this issue, we propose NExT, a method to teach LLMs to inspect the execution traces of programs (variable states of executed lines) and reason about their run-time behavior through chain-of-thought (CoT) rationales. Specifically, NExT uses self-training to bootstrap a synthetic training set of execution-aware rationales that lead to correct task solutions (e.g., fixed programs) without laborious manual annotation. Experiments on program repair tasks based on MBPP and HumanEval demonstrate that NExT improves the fix rate of a PaLM 2 model, by 26.1% and 14.3% absolute, respectively, with significantly improved rationale quality as verified by automated metrics and human raters. Our model can also generalize to scenarios where program traces are absent at test-time.

Intelligent tutoring agents powered by large language models (LLMs) have been increasingly explored to deliver personalized guidance in areas such as language learning and science education. However, their capabilities in guiding users to solve complex real-world tasks remain underexplored. To address this limitation, in this work, we focus on coding tutoring, a challenging problem that requires tutors to proactively guide students toward completing predefined coding tasks. We propose a novel agent workflow, Trace-and-Verify (TRAVER), which combines knowledge tracing to estimate a student's knowledge state and turn-by-turn verification to ensure effective guidance toward task completion. We introduce DICT, an automatic evaluation protocol that assesses tutor agents holistically using controlled student simulation and code generation tests. Extensive experiments reveal the challenges of coding tutoring and demonstrate that TRAVER achieves a significantly higher success rate. Although we use code tutoring as an example in this paper, our results and findings can be extended beyond coding, providing valuable insights into advancing tutoring agents for a variety of tasks.

Enterprise large language model (LLM) applications often begin as prototypes whose behavior is carried by prompts and retrieval context. Productization adds requirements for source boundaries, entity routing, answer contracts, and reproducible traces. We present a harness-engineering approach that reconstructs this pattern into a traceable, auditable LLM-agent architecture: deterministic behavior moves into code, manifests, schemas, and validation artifacts around a replaceable composition boundary, while source-backed claims remain the authority for runtime answers. We instantiate it on a public-data slice of five Korean corporate groups (25 listed companies) and evaluate three research questions. (1) The harness preserves its source-grounding, entity-routing, trace, output-hygiene, and recommendation-language contracts across the fixed validation scenarios; a fault-injection control confirms the validators flag deliberately broken contracts. (2) The checks the harness enforces held under model substitution: across three hosted models, they passed on all 270 composition-boundary runs; failures were confined to the model-composed side and were caught and recorded. (3) The code-owned guarantees are load-bearing, not reproducible by prompting alone: holding the model fixed and varying only the enforcement layer, prompt instructions alone let recommendation-language and internal-trace-leakage violations reach the reader, which the harness blocks entirely. A bolt-on external guardrail prevents such violations too but over-refuses, dropping utility to 88/120 where the harness preserves full utility (120/120); in this ablation, only code-owned enforcement preserves both safety and utility. The result is a reusable engineering pattern for turning exploratory prototypes into auditable applications with versioned source, control, and validation artifacts.

State-of-the-art large language models (LLMs) have demonstrated impressive code generation capabilities but struggle with real-world software engineering tasks, such as revising source code to address code reviews, hindering their practical use. Code review comments are often implicit, ambiguous, and colloquial, requiring models to grasp both code and human intent. This challenge calls for evaluating large language models' ability to bridge both technical and conversational contexts. While existing work has employed the automated code refinement (ACR) task to resolve these comments, current evaluation methods fall short, relying on text matching metrics that provide limited insight into model failures and remain susceptible to training data contamination. To address these limitations, we introduce a novel evaluation benchmark, CodeReviewQA that enables us to conduct fine-grained assessment of model capabilities and mitigate data contamination risks. In CodeReviewQA, we decompose the generation task of code refinement into three essential reasoning steps: change type recognition (CTR), change localisation (CL), and solution identification (SI). Each step is reformulated as multiple-choice questions with varied difficulty levels, enabling precise assessment of model capabilities, while mitigating data contamination risks. Our comprehensive evaluation spans 72 recently released large language models on 900 manually curated, high-quality examples across nine programming languages. Our results show that CodeReviewQA is able to expose specific model weaknesses in code review comprehension, disentangled from their generative automated code refinement results.

Code generation plays a crucial role in various tasks, such as code auto-completion and mathematical reasoning. Previous work has proposed numerous methods to enhance code generation performance, including integrating feedback from the compiler. Inspired by this, we present ReflectionCoder, a novel approach that effectively leverages reflection sequences constructed by integrating compiler feedback to improve one-off code generation performance. Furthermore, we propose reflection self-distillation and dynamically masked distillation to effectively utilize these reflection sequences. Extensive experiments on three benchmarks, i.e., HumanEval (+), MBPP (+), and MultiPl-E, demonstrate that models fine-tuned with our method achieve state-of-the-art performance. Notably, ReflectionCoder-DeepSeek-Coder-33B reaches pass@1 of 82.9 (76.8) on HumanEval (+) and 84.1 (72.0) on MBPP (+), on par with GPT-3.5-Turbo and Claude-3-opus, and surpasses early GPT-4. Beyond the code domain, we believe this approach can benefit other domains that focus on final results and require long reasoning paths. Code and data are available at https://github.com/SenseLLM/ReflectionCoder.

Software reverse engineering is an essential task in software engineering and security, but it can be a challenging process, especially for adversarial artifacts. To address this challenge, we present STraceBERT, a novel approach that utilizes a Java dynamic analysis tool to record calls to core Java libraries, and pretrain a BERT-style model on the recorded application traces for effective method source code retrieval from a candidate set. Our experiments demonstrate the effectiveness of STraceBERT in retrieving the source code compared to existing approaches. Our proposed approach offers a promising solution to the problem of code retrieval in software reverse engineering and opens up new avenues for further research in this area.

LLM agents reach users through resellers, who may rebrand a developer's agent or substitute a cheaper model. When provenance is disputed, attribution rests on the trajectory log (the record of tool calls, observations, and executed actions, not the model's reasoning), which the reseller stores and processes to meter usage. A watermark must therefore survive an adversary with full read/write access to the very evidence it is detected from; existing agent watermarks do not, as their attribution is read straight off that log. We present TRACE, to our knowledge the first agent watermark that is distortion-free in its action choices, self-synchronizing under deletion, and unconditionally invariant under rewriting. Deletion desynchronizes a position-derived key and rewriting alters content, so a deletion-robust key must come from content and a rewrite-robust key from position, and no single key serves both. A trajectory, however, has room for two watermarks. TRACE superposes a selection channel that sets which action is chosen, keyed on local content with a distortion-free sampler, so the agent's distribution is provably unchanged and detection resynchronizes after deletions, and a tally channel that sets how many records each decision group holds, keyed on the log's skeleton alone, which no rewriting can touch. We prove this behavioral watermark's signal is bought with decision entropy, each decision paying at least half its entropy and deterministic decisions nothing, and that erasing both channels forces the reseller to corrupt the trajectories it resells. On ToolBench and ALFWorld, TRACE matches the unwatermarked agent's success rate while its selection channel reaches detection scores near z = 100 on long-horizon trajectories, stays detectable under 70% step deletion, and keeps a tally channel exactly unchanged under LLM rewriting of any strength.

Recent studies have shown that large language models (LLMs) can infer private user attributes (e.g., age, location, gender) from user-generated text shared online, enabling rapid and large-scale privacy breaches. Existing anonymization-based defenses are coarse-grained, lacking word-level precision in anonymizing privacy-leaking elements. Moreover, they are inherently limited as altering user text to hide sensitive cues still allows attribute inference to occur through models' reasoning capabilities. To address these limitations, we propose a unified defense framework that combines fine-grained anonymization (TRACE) with inference-preventing optimization (RPS). TRACE leverages attention mechanisms and inference chain generation to identify and anonymize privacy-leaking textual elements, while RPS employs a lightweight two-stage optimization strategy to induce model rejection behaviors, thereby preventing attribute inference. Evaluations across diverse LLMs show that TRACE-RPS reduces attribute inference accuracy from around 50\% to below 5\% on open-source models. In addition, our approach offers strong cross-model generalization, prompt-variation robustness, and utility-privacy tradeoffs. Our code is available at https://github.com/Jasper-Yan/TRACE-RPS.

Current coding-agent benchmarks usually pro- vide the full task specification upfront. Real research coding often does not: the intended system is progressively disclosed through in- teraction, requiring the agent to track durable design commitments across a long session. We introduce a benchmark for this setting and study faithfulne Ss Loss U nder eM ergent s Pecification (SLUMP), defined as the reduc- tion in final implementation faithfulness un- der emergent specification relative to a single- shot specification control. The benchmark con- tains 20 recent ML papers (10 ICML 2025, 10 NeurIPS 2025), 371 atomic verifiable compo- nents, and interaction scripts of approximately 60 coding requests that progressively disclose the target design without revealing the paper itself. Final repositories are scored with a five-level component-faithfulness rubric and accompanied by an exposure audit to verify that scored components are recoverable from the visible interaction. Evaluated on Claude Code and Codex, the single-shot specification control achieves higher overall implementation fidelity on 16/20 and 14/20 papers, respectively. Structural integration degrades under emergent specification on both platforms, while seman- tic faithfulness loss is substantial on Claude Code and small on Codex. As a mitigation case study, we introduce ProjectGuard, an exter- nal project-state layer for specification tracking. On Claude Code, ProjectGuard recovers 90% of the faithfulness gap, increases fully faith- ful components from 118 to 181, and reduces severe failures from 72 to 49. These results identify specification tracking as a distinct eval- uation target for long-horizon coding agents.

LLMs demonstrate strong performance on code benchmarks, yet round-trip code execution reveals limitations in their ability to maintain consistent reasoning across forward and backward execution. We present RoundTripCodeEval (RTCE), a comprehensive benchmark consisting of four distinct code execution reasoning tasks designed to rigorously test round-trip consistency. RTCE provides an execution-free, exact-match evaluation of bijection fidelity, assessing whether models preserve a consistent one-to-one mapping between encoding and decoding operations across various algorithms and directions. We systematically evaluate state-of-the-art Code-LLMs using zero-shot prompting, supervised fine-tuning on execution traces, and self-reflection mechanisms. Each yields modest improvements, but none closes the gap, indicating that current LLMs struggle with true round-trip consistency, which demonstrates that they lack the internal coherence required for trustworthy code reasoning. RTCE surfaces several new and previously unmeasured insights that are not captured by existing I/O-prediction, execution-reasoning, or round-trip natural-language benchmarks. We will release the code and the dataset upon acceptance.

Large Language Models (LLMs) have made significant advancements in the field of code generation, offering unprecedented support for automated programming and assisting developers. However, LLMs sometimes generate code that appears plausible but fails to meet the expected requirements or executes incorrectly. This phenomenon of hallucinations in the coding field has not been explored. To advance the community's understanding and research on code hallucinations in LLMs, we propose a definition method for these hallucinations based on execution verification and introduce the concept of code hallucinations for the first time. We categorize code hallucinations into four main types: mapping, naming, resource, and logic hallucinations, each further divided into different subcategories to better understand and address the unique challenges faced by LLMs during code generation. To systematically evaluate code hallucinations, we propose a dynamic detection algorithm for code hallucinations and construct the CodeHalu benchmark, which includes 8,883 samples from 699 tasks, to actively detect hallucination phenomena in LLMs during programming. We tested 16 popular LLMs on this benchmark to evaluate the frequency and nature of their hallucinations during code generation. The findings reveal significant variations in the accuracy and reliability of LLMs in generating code, highlighting the urgent need to improve models and training methods to ensure the functional correctness and safety of automatically generated code. This study not only classifies and quantifies code hallucinations but also provides insights for future improvements in LLM-based code generation research. The CodeHalu benchmark and code are publicly available at https://github.com/yuchen814/CodeHalu.

Large Language Models (LLMs) deployed in agentic environments must exercise multiple capabilities across different task instances, where a capability is performing one or more actions in a trajectory that are necessary for successfully solving a subset of tasks in the environment. Many existing approaches either rely on synthetic training data that is not targeted to the model's actual capability deficits in the target environment or train directly on the target environment, where the model needs to implicitly learn the capabilities across tasks. We introduce TRACE (Turning Recurrent Agent failures into Capability-targeted training Environments), an end-to-end system for environment-specific agent self-improvement. TRACE contrasts successful and failed trajectories to automatically identify lacking capabilities, synthesizes a targeted training environment for each that rewards whether the capability was exercised, and trains a LoRA adapter via RL on each synthetic environment, routing to the relevant adapter at inference. Empirically, TRACE generalizes across different environments, improving over the base agent by +14.1 points on τ^2-bench (customer service) and +7 perfect scores on ToolSandbox (tool use), outperforming the strongest baseline by +7.4 points and +4 perfect scores, respectively. Given the same number of rollouts, TRACE scales more efficiently than baselines, outperforming GRPO and GEPA by +9.2 and +7.4 points on τ^2-bench.

Smart contract transactions associated with security attacks often exhibit distinct behavioral patterns compared with historical benign transactions before the attacking events. While many runtime monitoring and guarding mechanisms have been proposed to validate invariants and stop anomalous transactions on the fly, the empirical effectiveness of the invariants used remains largely unexplored. In this paper, we studied 23 prevalent invariants of 8 categories, which are either deployed in high-profile protocols or endorsed by leading auditing firms and security experts. Using these well-established invariants as templates, we developed a tool Trace2Inv which dynamically generates new invariants customized for a given contract based on its historical transaction data. We evaluated Trace2Inv on 42 smart contracts that fell victim to 27 distinct exploits on the Ethereum blockchain. Our findings reveal that the most effective invariant guard alone can successfully block 18 of the 27 identified exploits with minimal gas overhead. Our analysis also shows that most of the invariants remain effective even when the experienced attackers attempt to bypass them. Additionally, we studied the possibility of combining multiple invariant guards, resulting in blocking up to 23 of the 27 benchmark exploits and achieving false positive rates as low as 0.32%. Trace2Inv outperforms current state-of-the-art works on smart contract invariant mining and transaction attack detection in terms of both practicality and accuracy. Though Trace2Inv is not primarily designed for transaction attack detection, it surprisingly found two previously unreported exploit transactions, earlier than any reported exploit transactions against the same victim contracts.

Code execution is a fundamental aspect of programming language semantics that reflects the exact behavior of the code. However, most pre-trained models for code intelligence ignore the execution trace and only rely on source code and syntactic structures. In this paper, we investigate how well pre-trained models can understand and perform code execution. We develop a mutation-based data augmentation technique to create a large-scale and realistic Python dataset and task for code execution, which challenges existing models such as Codex. We then present CodeExecutor, a Transformer model that leverages code execution pre-training and curriculum learning to enhance its semantic comprehension. We evaluate CodeExecutor on code execution and show its promising performance and limitations. We also demonstrate its potential benefits for code intelligence tasks such as zero-shot code-to-code search and text-to-code generation. Our analysis provides insights into the learning and generalization abilities of pre-trained models for code execution.

Language models of code (LMs) work well when the surrounding code in the vicinity of generation provides sufficient context. This is not true when it becomes necessary to use types or functionality defined in another module or library, especially those not seen during training. LMs suffer from limited awareness of such global context and end up hallucinating, e.g., using types defined in other files incorrectly. Recent work tries to overcome this issue by retrieving global information to augment the local context. However, this bloats the prompt or requires architecture modifications and additional training. Integrated development environments (IDEs) assist developers by bringing the global context at their fingertips using static analysis. We extend this assistance, enjoyed by developers, to the LMs. We propose a notion of monitors that use static analysis in the background to guide the decoding. Unlike a priori retrieval, static analysis is invoked iteratively during the entire decoding process, providing the most relevant suggestions on demand. We demonstrate the usefulness of our proposal by monitoring for type-consistent use of identifiers whenever an LM generates code for object dereference. To evaluate our approach, we curate PragmaticCode, a dataset of open-source projects with their development environments. On models of varying parameter scale, we show that monitor-guided decoding consistently improves the ability of an LM to not only generate identifiers that match the ground truth but also improves compilation rates and agreement with ground truth. We find that LMs with fewer parameters, when guided with our monitor, can outperform larger LMs. With monitor-guided decoding, SantaCoder-1.1B achieves better compilation rate and next-identifier match than the much larger text-davinci-003 model. The datasets and code will be released at https://aka.ms/monitors4codegen .

MOLOT (Malicious Operational Logic Observation Transformer) is a static malicious-code detection system designed for SAST setup where package metadata, maintainer history, and dynamic execution traces may be unavailable or unreliable. The system represents source code as behavior sequences derived from static call graphs, includes an explanation stage that ranks suspicious behavior activities and maps them back to source-code locations. The approach is evaluated on Python and JavaScript packages from PyPI and npm, compared with opensource detection tools, and validated under product constraints including runtime, memory use, and false-positive rates observed in a real moderation workflow. We also release Open Malicious-Code Bench, a public benchmark for reproducible evaluation of malicious-package detection methods. The results show that static behavior-sequence modeling can provide accurate, explainable, and deployable malicious-code detection for modern DevSecOps workflows.

Evaluating large language models (LLMs) for instrument control requires methods that go beyond standard, stateless algorithmic benchmarks, since the behavior of physical systems cannot be fully captured by unit tests alone. Here we introduce EnvTrace, a simulation-based method that evaluates execution traces to assess semantic code equivalence. EnvTrace is demonstrated with a beamline control-logic digital twin to facilitate the evaluation of instrument control code, with the digital twin itself also enabling the pre-execution validation of live experiments. Over 30 LLMs were evaluated using trace alignment to generate a multi-faceted score for functional correctness across key behavioral dimensions, showing that many top-tier models can approach human-level performance in rapid control-code generation. This is a first step toward a broader vision where LLMs and digital twins work symbiotically: LLMs providing intuitive control and agentic orchestration, and digital twins offering safe and high-fidelity environments, paving the way towards autonomous embodied AI.

In this paper we present a novel solution that combines the capabilities of Large Language Models (LLMs) with Formal Verification strategies to verify and automatically repair software vulnerabilities. Initially, we employ Bounded Model Checking (BMC) to locate the software vulnerability and derive a counterexample. The counterexample provides evidence that the system behaves incorrectly or contains a vulnerability. The counterexample that has been detected, along with the source code, are provided to the LLM engine. Our approach involves establishing a specialized prompt language for conducting code debugging and generation to understand the vulnerability's root cause and repair the code. Finally, we use BMC to verify the corrected version of the code generated by the LLM. As a proof of concept, we create ESBMC-AI based on the Efficient SMT-based Context-Bounded Model Checker (ESBMC) and a pre-trained Transformer model, specifically gpt-3.5-turbo, to detect and fix errors in C programs. Our experimentation involved generating a dataset comprising 1000 C code samples, each consisting of 20 to 50 lines of code. Notably, our proposed method achieved an impressive success rate of up to 80% in repairing vulnerable code encompassing buffer overflow and pointer dereference failures. We assert that this automated approach can effectively incorporate into the software development lifecycle's continuous integration and deployment (CI/CD) process.

Smart contracts, self-executing programs on the blockchain, facilitate reliable value exchanges without centralized oversight. Despite the recent focus on dynamic analysis of their transaction histories in both industry and academia, no open-source tool currently offers comprehensive tracking of complete transaction information to extract user-desired data such as invariant-related data. This paper introduces OpenTracer, designed to address this gap. OpenTracer guarantees comprehensive tracking of every execution step, providing complete transaction information. OpenTracer has been employed to analyze 350,800 Ethereum transactions, successfully inferring 23 different types of invariant from predefined templates. The tool is fully open-sourced, serving as a valuable resource for developers and researchers aiming to study transaction behaviors or extract and validate new invariants from transaction traces. The source code of OpenTracer is available at https://github.com/jeffchen006/OpenTracer.

Using Large Language Models (LLMs) has gained popularity among software developers for generating source code. However, the use of LLM-generated code can introduce risks of adding suboptimal, defective, and vulnerable code. This makes it necessary to devise methods for the accurate detection of LLM-generated code. Toward this goal, we perform a case study of Claude 3 Haiku (or Claude 3 for brevity) on CodeSearchNet dataset. We divide our analyses into two parts: function-level and class-level. We extract 22 software metric features, such as Code Lines and Cyclomatic Complexity, for each level of granularity. We then analyze code snippets generated by Claude 3 and their human-authored counterparts using the extracted features to understand how unique the code generated by Claude 3 is. In the following step, we use the unique characteristics of Claude 3-generated code to build Machine Learning (ML) models and identify which features of the code snippets make them more detectable by ML models. Our results indicate that Claude 3 tends to generate longer functions, but shorter classes than humans, and this characteristic can be used to detect Claude 3-generated code with ML models with 82% and 66% accuracies for function-level and class-level snippets, respectively.

Knowledge Tracing (KT) is a task of tracing evolving knowledge state of students with respect to one or more concepts as they engage in a sequence of learning activities. One important purpose of KT is to personalize the practice sequence to help students learn knowledge concepts efficiently. However, existing methods such as Bayesian Knowledge Tracing and Deep Knowledge Tracing either model knowledge state for each predefined concept separately or fail to pinpoint exactly which concepts a student is good at or unfamiliar with. To solve these problems, this work introduces a new model called Dynamic Key-Value Memory Networks (DKVMN) that can exploit the relationships between underlying concepts and directly output a student's mastery level of each concept. Unlike standard memory-augmented neural networks that facilitate a single memory matrix or two static memory matrices, our model has one static matrix called key, which stores the knowledge concepts and the other dynamic matrix called value, which stores and updates the mastery levels of corresponding concepts. Experiments show that our model consistently outperforms the state-of-the-art model in a range of KT datasets. Moreover, the DKVMN model can automatically discover underlying concepts of exercises typically performed by human annotations and depict the changing knowledge state of a student.

Large language models increasingly write and repair production code, yet evidence is mounting that their test-passing patches leave codebases harder to maintain. We identify one concrete source: deletion avoidance, the systematic tendency to retain code that an intended edit requires removing. Across the five leading models on the official SWE-bench Verified leaderboard, deletion recall against the developer patch reaches at most 71.7% even on tasks all five solve, and models reach the right file for over 92% of required deletions but cut the exact line in under 52% of cases. Instead, 29.0% of passing patches wrap the targeted code in a guard or fallback, a pattern we call Guard-and-Go. Such patches pass because the original tests rarely check removal: when we retrofit 34 Verified tasks with tests that fail if the targeted code remains, four frontier models spanning closed and open weights fall from 63.2% to 41.9%. Because real repairs mix removal with addition, we curate CanItDelete, a benchmark of 200 tasks mined from real commits whose entire required edit is deletion. Even with the addition work gone, the best model still fails one task in five, and smaller open models fall to 18.0%. We then ablate GPT-5.6 Sol under four cumulative prompts; success moves little until we supply the exact lines, which nearly eliminate incomplete deletion yet raise success only to 80.5% because the model then deletes beyond the spans or adds code instead. Finally, through a pilot study we show one potential fix: teaching deletion during post-training reduces deletion avoidance and improves broader code-editing performance, suggesting the behavior is undertrained rather than beyond reach.

Multi-server MCP agents create an information-flow control problem: faithful tool composition can turn individually benign read/write permissions into cross-boundary credential propagation -- a structural side effect of workflow topology, not necessarily malicious model behavior. We present MCPHunt, to our knowledge the first controlled benchmark that isolates non-adversarial, verbatim credential propagation across multi-server MCP trust boundaries, with three methodological contributions: (1) canary-based taint tracking that reduces propagation detection to objective string matching; (2) an environment-controlled coverage design with risky, benign, and hard-negative conditions that validates pipeline soundness and controls for credential-format confounds; (3) CRS stratification that disentangles task-mandated propagation (faithful execution of verbatim-transfer instructions) from policy-violating propagation (credentials included despite the option to redact). Across 3,615 main-benchmark traces from 5 models spanning 147 tasks and 9 mechanism families, policy-violating propagation rates reach 11.5--41.3% across all models. This propagation is pathway-specific (25x cross-mechanism range) and concentrated in browser-mediated data flows; hard-negative controls provide evidence that production-format credentials are not necessary -- prompt-directed cross-boundary data flow is sufficient. A prompt-mitigation study across 3 models reduces policy-violating propagation by up to 97% while preserving 80.5% utility, but effectiveness varies with instruction-following capability -- suggesting that prompt-level defenses alone may not suffice. Code, traces, and labeling pipeline are released under MIT and CC BY 4.0.

Diffusion large language models promise faster generation by refining many token positions in parallel, but this parallelism introduces a hidden control problem: which proposed tokens should be transferred into the partially decoded sequence at each step? We refer to this decision as token commitment. Existing frozen-generator decoders largely rely on hand-designed confidence rules or block-specific acceptance filters. We argue that token commitment can instead be learned as a reusable trace-state policy. We introduce TraceLock, a lightweight plug-in controller that instantiates this policy for a frozen diffusion language model. Since oracle commitment times are unavailable, TraceLock derives self-supervision from future stability: at decoding step t, a proposed token for position i is labeled stable if it matches the final token at position i after the full decoding trace completes. The controller scores variable-length trace states and decides which active token proposals should be committed to the partially decoded sequence. Once trained for a given frozen backbone, the controller can be deployed across local-window widths, generation lengths, and step budgets without retraining or per-setting calibration. Experiments on question answering, mathematical reasoning, and code generation show that TraceLock improves the quality-step tradeoff over heuristic and learned baselines, with particularly stable behavior under cross-setting deployment. Diagnostic analyses show that its decisions are not reducible to scalar confidence, suggesting that frozen diffusion language models expose a learnable space of commitment trajectories beyond confidence-based decoding. Code is available at https://github.com/BobSun98/TraceLock.

Testing is an integral part of the software development process. Yet, writing tests is time-consuming and therefore often neglected. Classical test generation tools such as EvoSuite generate behavioral test suites by optimizing for coverage, but tend to produce tests that are hard to understand. Language models trained on code can generate code that is highly similar to that written by humans, but current models are trained to generate each file separately, as is standard practice in natural language processing, and thus fail to consider the code-under-test context when producing a test file. In this work, we propose the Aligned Code And Tests Language Model (CAT-LM), a GPT-style language model with 2.7 Billion parameters, trained on a corpus of Python and Java projects. We utilize a novel pretraining signal that explicitly considers the mapping between code and test files when available. We also drastically increase the maximum sequence length of inputs to 8,192 tokens, 4x more than typical code generation models, to ensure that the code context is available to the model when generating test code. We analyze its usefulness for realistic applications, showing that sampling with filtering (e.g., by compilability, coverage) allows it to efficiently produce tests that achieve coverage similar to ones written by developers while resembling their writing style. By utilizing the code context, CAT-LM generates more valid tests than even much larger language models trained with more data (CodeGen 16B and StarCoder) and substantially outperforms a recent test-specific model (TeCo) at test completion. Overall, our work highlights the importance of incorporating software-specific insights when training language models for code and paves the way to more powerful automated test generation.

Every call to an LLM classification endpoint produces a labeled input-output pair already retained in production logs. These pairs constitute a free, growing training set: a lightweight surrogate trained on them can absorb a significant portion of future traffic at near-zero marginal inference cost. The open questions are when the surrogate is reliable enough to deploy, what it handles versus defers, and how that boundary evolves as data accumulates. We introduce TRACER (Trace-based Adaptive Cost-Efficient Routing), an open-source system that trains ML surrogates on an LLM's own production traces and governs deployment through a parity gate: the surrogate is activated only when its agreement with the LLM exceeds a user-specified threshold α. To make the routing boundary transparent, TRACER generates interpretability artifacts describing which input regions the surrogate handles, where it plateaus, and why it defers. On a 77-class intent benchmark with a Sonnet 4.6 teacher, TRACER achieves 83-100% surrogate coverage depending on the quality target α; on a 150-class benchmark, the surrogate fully replaces the teacher. On a natural language inference task, the parity gate correctly refuses deployment because the embedding representation cannot support reliable separation. The system is available as open-source software.

Mechanistic interpretability seeks to understand the internal mechanisms of machine learning models, where localization -- identifying the important model components -- is a key step. Activation patching, also known as causal tracing or interchange intervention, is a standard technique for this task (Vig et al., 2020), but the literature contains many variants with little consensus on the choice of hyperparameters or methodology. In this work, we systematically examine the impact of methodological details in activation patching, including evaluation metrics and corruption methods. In several settings of localization and circuit discovery in language models, we find that varying these hyperparameters could lead to disparate interpretability results. Backed by empirical observations, we give conceptual arguments for why certain metrics or methods may be preferred. Finally, we provide recommendations for the best practices of activation patching going forwards.

Skill-distillation pipelines learn reusable rules from LLM agent trajectories, but they lack a key signal: how much each step costs. Without per-step cost, a pipeline cannot distinguish adding a missing step to fix a bug from removing an expensive step that never affected the outcome. We introduce ClawTrace, an agent tracing platform that records every LLM call, tool use, and sub-agent spawn during an agent session and compiles each session into a TraceCard: a compact YAML summary with per-step USD cost, token counts, and redundancy flags. Built on ClawTrace, CostCraft is a distillation pipeline that reads TraceCards and produces three types of skill patches. Preserve patches keep behaviors that led to success. Prune patches remove expensive steps that did not matter, each backed by a counterfactual argument against a named high-cost step. Repair patches fix failures grounded in oracle evidence. Ablations on 30 held-out SpreadsheetBench tasks show that both cost attribution and prune patches independently reduce quality regressions. When the same skill is applied to 30 unrelated SkillsBench tasks, an unexpected asymmetry emerges: prune rules transferred across benchmarks and cut median cost by 32%, while preserve rules, trained on benchmark-specific conventions, caused regressions on new task types. We release ClawTrace and TraceCards as open infrastructure for cost-aware agent research.

Coding agents can fix a failing example without preserving the domain rule that made it fail, so later generations can repeat the same plausible mistake. We present agentic synthesis against counterexample-supplemented sketches, a repository-native method for systems whose governing policy is discovered during implementation. A human starts with a partial, code-shaped sketch, and a coding agent generates the first implementation. When a concrete failure exposes missing or mistaken policy, an operator explicitly approves the corrected behavior and rule. The agent then revises the sketch and repairs or regenerates code and prompt surfaces for that one counterexample. The full archive preserves provenance; a selected regression set gates each revision before the next candidate is revealed; and periodic clean regeneration tests whether the evolved sketch, rather than prompt history or accumulated examples, carries the learned policy. We demonstrate the method with CatSynth, a synthetic browser application and captured coding-agent experiment. In one open-world run with GPT-5.4-mini, 8 of 14 frozen candidate cases became counterexamples. The rebuild controls inherited that promotion schedule, and all three paths passed the 8 accepted cases. Rebuilding from the evolved sketch passed 19 of 21 withheld cases, compared with 15 of 21 when rebuilding from the initial sketch and replaying all accepted examples. Retaining code across counterexamples required 9 Developer calls and 719 lines of cumulative artifact churn, versus 15 calls and 2,394 lines for replay-all, and passed 18 of 21 withheld cases. These results provide inspectable evidence that the evolved sketch carried reviewed policy and that retaining code reduced rework in this run; with one model and one reveal order, they do not establish general superiority or correctness beyond the encoded checks.

As coding agents are increasingly deployed in large codebases, the need to automatically design challenging, codebase-level evaluation is central. We propose Gistify, a task where a coding LLM must create a single, minimal, self-contained file that can reproduce a specific functionality of a codebase. The coding LLM is given full access to a codebase along with a specific entrypoint (e.g., a python command), and the generated file must replicate the output of the same command ran under the full codebase, while containing only the essential components necessary to execute the provided command. Success on Gistify requires both structural understanding of the codebase, accurate modeling of its execution flow as well as the ability to produce potentially large code patches. Our findings show that current state-of-the-art models struggle to reliably solve Gistify tasks, especially ones with long executions traces.

The advent of pre-trained code language models (CodeLMs) has lead to significant progress in language-to-code generation. State-of-the-art approaches in this area combine CodeLM decoding with sample pruning and reranking using test cases or heuristics based on the execution results. However, it is challenging to obtain test cases for many real-world language-to-code applications, and heuristics cannot well capture the semantic features of the execution results, such as data type and value range, which often indicates the correctness of the program. In this work, we propose LEVER, a simple approach to improve language-to-code generation by learning to verify the generated programs with their execution results. Specifically, we train verifiers to determine whether a program sampled from the CodeLM is correct or not based on the natural language input, the program itself and its execution results. The sampled programs are reranked by combining the verification score with the CodeLM generation probability, and marginalizing over programs with the same execution results. On four datasets across the domains of table QA, math QA and basic Python programming, LEVER consistently improves over the base CodeLMs (4.6% to 10.9% with code-davinci-002) and achieves new state-of-the-art results on all of them.

Pretrained language models have shown superior performance on many natural language processing tasks, yet they still struggle at multi-step formal reasoning tasks like grade school math problems. One key challenge of finetuning them to solve such math reasoning problems is that many existing datasets only contain one reference solution for each problem, despite the fact that there are often alternative solutions resembling different reasoning paths to the final answer. This way, the finetuned models are biased towards the limited reference solutions, which limits their generalization to unseen examples. To mitigate this issue, we propose to let the model perform sampling during training and learn from both self-sampled fully-correct solutions, which yield the correct answer upon execution, and partially-correct solutions, whose intermediate state matches an intermediate state of a known correct solution. We show that our use of self-sampled correct and partially-correct solutions can benefit learning and help guide the sampling process, leading to more efficient exploration of the solution space. Additionally, we explore various training objectives to support learning from multiple solutions per example and find they greatly affect the performance. Experiments on two math reasoning datasets show the effectiveness of our method compared to learning from a single reference solution with MLE, where we improve PASS@100 from 35.5% to 44.5% for GSM8K, and 27.6% to 36.2% PASS@80 for MathQA. Such improvements are also consistent across different model sizes. Our code is available at https://github.com/microsoft/TraceCodegen.

Current paradigms for code verification rely heavily on external mechanisms-such as execution-based unit tests or auxiliary LLM judges-which are often labor-intensive or limited by the judging model's own capabilities. This raises a fundamental, yet unexplored question: Can an LLM's functional correctness be assessed purely from its internal computational structure? Our primary objective is to investigate whether the model's neural dynamics encode internally decodable signals that are predictive of logical validity during code generation. Inspired by mechanistic interpretability, we propose to treat code verification as a mechanistic diagnostic task, mapping the model's explicit algorithmic trajectory into line-level attribution graphs. By decomposing complex residual flows, we aim to identify the structural signatures that distinguish sound reasoning from logical failure within the model's internal circuits. Analysis across Python, C++, and Java confirms that intrinsic correctness signals are robust across diverse syntaxes. Topological features from these internal graphs predict correctness more reliably than surface heuristics and enable targeted causal interventions to fix erroneous logic. These findings establish internal introspection as a decodable property for verifying generated code. Our code is at https:// github.com/bruno686/CodeCircuit.

AI coding assistants are widely used for tasks like code generation. These tools now require large and complex contexts, automatically sourced from various originsx2014across files, projects, and contributorsx2014forming part of the prompt fed to underlying LLMs. This automatic context-gathering introduces new vulnerabilities, allowing attackers to subtly poison input to compromise the assistant's outputs, potentially generating vulnerable code or introducing critical errors. We propose a novel attack, Cross-Origin Context Poisoning (XOXO), that is challenging to detect as it relies on adversarial code modifications that are semantically equivalent. Traditional program analysis techniques struggle to identify these perturbations since the semantics of the code remains correct, making it appear legitimate. This allows attackers to manipulate coding assistants into producing incorrect outputs, while shifting the blame to the victim developer. We introduce a novel, task-agnostic, black-box attack algorithm GCGS that systematically searches the transformation space using a Cayley Graph, achieving a 75.72% attack success rate on average across five tasks and eleven models, including GPT 4.1 and Claude 3.5 Sonnet v2 used by popular AI coding assistants. Furthermore, defenses like adversarial fine-tuning are ineffective against our attack, underscoring the need for new security measures in LLM-powered coding tools.

Large language models (LLMs) have made remarkable strides in various natural language processing tasks, but their performance on complex reasoning problems remains hindered by a lack of explainability and trustworthiness. This issue, often manifesting as hallucinations or unattributable reasoning processes, limits their applicability in complex reasoning scenarios. To address this, we propose Knowledge Graph-constrained Trajectory Reasoning Attribution and Chain Explanation Supervision (KG-TRACES), a novel framework that enhances the reasoning ability of LLMs through explicit supervision over reasoning paths and processes. KG-TRACES jointly supervises the model to: (1) predict symbolic relation paths, (2) predict full triple-level reasoning paths, and (3) generate attribution-aware reasoning processes grounded in the reasoning paths. At inference phase, the model adapts to both KG-available and KG-unavailable scenarios, retrieving reasoning paths from a KG when possible or predicting plausible reasoning paths with only intrinsic knowledge when not. This design enables the model to reason in an explainable and source-attributable pattern. Through extensive experiments on complex reasoning tasks, we demonstrate that KG-TRACES significantly outperforms existing SOTA: it improves Hits@1 by 1.6% and F1 by 4.7% on WebQSP, and achieves improvements of 4.8% in Hits@1 and 2.1% in F1 on CWQ. Moreover, we show its transferability to specialized domains such as medicine. By visualizing the intermediate steps of reasoning processes, we further show that the explicit supervision introduced by KG-TRACES leads to more stable and goal-directed reasoning processes, aligning closely with correct answers. Code is available at https://github.com/Edaizi/KG-TRACES.

With the recent advancement of Large Language Models (LLMs), generating functionally correct code has become less complicated for a wide array of developers. While using LLMs has sped up the functional development process, it poses a heavy risk to code security. Code generation with proper security measures using LLM is a significantly more challenging task than functional code generation. Security measures may include adding a pair of lines of code with the original code, consisting of null pointer checking or prepared statements for SQL injection prevention. Currently, available code repair LLMs generate code repair by supervised fine-tuning, where the model looks at cross-entropy loss. However, the original and repaired codes are mostly similar in functionality and syntactically, except for a few (1-2) lines, which act as security measures. This imbalance between the lines needed for security measures and the functional code enforces the supervised fine-tuned model to prioritize generating functional code without adding proper security measures, which also benefits the model by resulting in minimal loss. Therefore, in this work, for security hardening and strengthening of generated code from LLMs, we propose a reinforcement learning-based method for program-specific repair with the combination of semantic and syntactic reward mechanisms that focus heavily on adding security and functional measures in the code, respectively.

The advent of instruction-tuned Large Language Models designed for coding tasks (Code LLMs) has transformed software engineering practices. However, their robustness against various input challenges remains a critical concern. This study introduces DegradePrompter, a novel method designed to systematically evaluate the robustness of instruction-tuned Code LLMs. We assess the impact of diverse input challenges on the functionality and correctness of generated code using rigorous metrics and established benchmarks. Our comprehensive evaluation includes five state-of-the-art open-source models and three production-grade closed-source models, revealing varying degrees of robustness. Open-source models demonstrate an increased susceptibility to input perturbations, resulting in declines in functional correctness ranging from 12% to 34%. In contrast, commercial models demonstrate relatively greater resilience, with performance degradation ranging from 3% to 24%. To enhance the robustness of the models against these vulnerabilities, we investigate a straightforward yet effective mitigation strategy. Our findings highlight the need for robust defense mechanisms and comprehensive evaluations during both the development and deployment phases to ensure the resilience and reliability of automated code generation systems.

The availability of large-scale datasets, advanced architectures, and powerful computational resources have led to effective code models that automate diverse software engineering activities. The datasets usually consist of billions of lines of code from both open-source and private repositories. A code model memorizes and produces source code verbatim, which potentially contains vulnerabilities, sensitive information, or code with strict licenses, leading to potential security and privacy issues. This paper investigates an important problem: to what extent do code models memorize their training data? We conduct an empirical study to explore memorization in large pre-trained code models. Our study highlights that simply extracting 20,000 outputs (each having 512 tokens) from a code model can produce over 40,125 code snippets that are memorized from the training data. To provide a better understanding, we build a taxonomy of memorized contents with 3 categories and 14 subcategories. The results show that the prompts sent to the code models affect the distribution of memorized contents. We identify several key factors of memorization. Specifically, given the same architecture, larger models suffer more from memorization problems. A code model produces more memorization when it is allowed to generate longer outputs. We also find a strong positive correlation between the number of an output's occurrences in the training data and that in the generated outputs, which indicates that a potential way to reduce memorization is to remove duplicates in the training data. We then identify effective metrics that infer whether an output contains memorization accurately. We also make suggestions to deal with memorization.

Large language models (LLMs) have demonstrated an impressive ability to generate code for various programming tasks. In many instances, LLMs can generate a correct program for a task when given numerous trials. Consequently, a recent trend is to do large scale sampling of programs using a model and then filtering/ranking the programs based on the program execution on a small number of known unit tests to select one candidate solution. However, these approaches assume that the unit tests are given and assume the ability to safely execute the generated programs (which can do arbitrary dangerous operations such as file manipulations). Both of the above assumptions are impractical in real-world software development. In this paper, we propose CodeRanker, a neural ranker that can predict the correctness of a sampled program without executing it. Our CodeRanker is fault-aware i.e., it is trained to predict different kinds of execution information such as predicting the exact compile/runtime error type (e.g., an IndexError or a TypeError). We show that CodeRanker can significantly increase the pass@1 accuracy of various code generation models (including Codex, GPT-Neo, GPT-J) on APPS, HumanEval and MBPP datasets.

Code coverage is a widely used metric for quantifying the extent to which program elements, such as statements or branches, are executed during testing. Calculating code coverage is resource-intensive, requiring code building and execution with additional overhead for the instrumentation. Furthermore, computing coverage of any snippet of code requires the whole program context. Using Machine Learning to amortize this expensive process could lower the cost of code coverage by requiring only the source code context, and the task of code coverage prediction can be a novel benchmark for judging the ability of models to understand code. We propose a novel benchmark task called Code Coverage Prediction for Large Language Models (LLMs). We formalize this task to evaluate the capability of LLMs in understanding code execution by determining which lines of a method are executed by a given test case and inputs. We curate and release a dataset we call COVERAGEEVAL by executing tests and code from the HumanEval dataset and collecting code coverage information. We report the performance of four state-of-the-art LLMs used for code-related tasks, including OpenAI's GPT-4 and GPT-3.5-Turbo, Google's BARD, and Anthropic's Claude, on the Code Coverage Prediction task. Finally, we argue that code coverage as a metric and pre-training data source are valuable for overall LLM performance on software engineering tasks.

AI agents are increasingly embedded in real software systems, where they execute multi-step workflows through multi-turn dialogue, tool invocations, and intermediate decisions. These long execution histories, called agentic traces, make validation difficult. Outcome-only benchmarks can miss critical procedural failures, such as incorrect workflow routing, unsafe tool usage, or violations of prompt-specified rules. This paper presents AgentPex, an AI-powered tool designed to systematically evaluate agentic traces. AgentPex extracts behavioral rules from agent prompts and system instructions, then uses these specifications to automatically evaluate traces for compliance. We evaluate AgentPex on 424 traces from τ^2-bench across models in telecom, retail, and airline customer service. Our results show that AgentPex distinguishes agent behavior across models and surfaces specification violations that are not captured by outcome-only scoring. It also provides fine-grained analysis by domain and metric, enabling developers to understand agent strengths and weaknesses at scale. The source code of AgentPex is available at https://github.com/microsoft/agentpex.

Background: Some developer activity traditionally performed manually, such as making code commits, opening, managing, or closing issues is increasingly subject to automation in many OSS projects. Specifically, such activity is often performed by tools that react to events or run at specific times. We refer to such automation tools as bots and, in many software mining scenarios related to developer productivity or code quality it is desirable to identify bots in order to separate their actions from actions of individuals. Aim: Find an automated way of identifying bots and code committed by these bots, and to characterize the types of bots based on their activity patterns. Method and Result: We propose BIMAN, a systematic approach to detect bots using author names, commit messages, files modified by the commit, and projects associated with the ommits. For our test data, the value for AUC-ROC was 0.9. We also characterized these bots based on the time patterns of their code commits and the types of files modified, and found that they primarily work with documentation files and web pages, and these files are most prevalent in HTML and JavaScript ecosystems. We have compiled a shareable dataset containing detailed information about 461 bots we found (all of whom have more than 1000 commits) and 13,762,430 commits they created.

Code generation aims to produce code that fulfills requirements written in natural languages automatically. Large language Models (LLMs) like ChatGPT have demonstrated promising effectiveness in this area. Nonetheless, these LLMs often fail to ensure the syntactic and semantic correctness of the generated code. Recently, researchers proposed multi-agent frameworks that guide LLMs with different prompts to analyze programming tasks, generate code, perform testing in a sequential workflow. However, the performance of the workflow is not robust as the code generation depends on the performance of each agent. To address this challenge, we propose CodeCoR, a self-reflective multi-agent framework that evaluates the effectiveness of each agent and their collaborations. Specifically, for a given task description, four agents in CodeCoR generate prompts, code, test cases, and repair advice, respectively. Each agent generates more than one output and prunes away the low-quality ones. The generated code is tested in the local environment: the code that fails to pass the generated test cases is sent to the repair agent and the coding agent re-generates the code based on repair advice. Finally, the code that passes the most number of generated test cases is returned to users. Our experiments on four widely used datasets, HumanEval, HumanEval-ET, MBPP, and MBPP-ET, demonstrate that CodeCoR significantly outperforms existing baselines (e.g., CodeCoT and MapCoder), achieving an average Pass@1 score of 77.8%.

In software development, the predominant emphasis on functionality often supersedes security concerns, a trend gaining momentum with AI-driven automation tools like GitHub Copilot. These tools significantly improve developers' efficiency in functional code development. Nevertheless, it remains a notable concern that such tools are also responsible for creating insecure code, predominantly because of pre-training on publicly available repositories with vulnerable code. Moreover, developers are called the "weakest link in the chain" since they have very minimal knowledge of code security. Although existing solutions provide a reasonable solution to vulnerable code, they must adequately describe and educate the developers on code security to ensure that the security issues are not repeated. Therefore we introduce a multipurpose code vulnerability analysis system SecRepair, powered by a large language model, CodeGen2 assisting the developer in identifying and generating fixed code along with a complete description of the vulnerability with a code comment. Our innovative methodology uses a reinforcement learning paradigm to generate code comments augmented by a semantic reward mechanism. Inspired by how humans fix code issues, we propose an instruction-based dataset suitable for vulnerability analysis with LLMs. We further identify zero-day and N-day vulnerabilities in 6 Open Source IoT Operating Systems on GitHub. Our findings underscore that incorporating reinforcement learning coupled with semantic reward augments our model's performance, thereby fortifying its capacity to address code vulnerabilities with improved efficacy.

Agents powered by large language models (LLMs) are increasingly adopted in the software industry, contributing code as collaborators or even autonomous developers. As their presence grows, it becomes important to assess the current boundaries of their coding abilities. Existing agentic coding benchmarks, however, cover a limited task scope, e.g., bug fixing within a single pull request (PR), and often rely on non-executable evaluations or lack an automated approach for continually updating the evaluation coverage. To address such issues, we propose FeatureBench, a benchmark designed to evaluate agentic coding performance in end-to-end, feature-oriented software development. FeatureBench incorporates an execution-based evaluation protocol and a scalable test-driven method that automatically derives tasks from code repositories with minimal human effort. By tracing from unit tests along a dependency graph, our approach can identify feature-level coding tasks spanning multiple commits and PRs scattered across the development timeline, while ensuring the proper functioning of other features after the separation. Using this framework, we curated 200 challenging evaluation tasks and 3825 executable environments from 24 open-source repositories in the first version of our benchmark. Empirical evaluation reveals that the state-of-the-art agentic model, such as Claude 4.5 Opus, which achieves a 74.4% resolved rate on SWE-bench, succeeds on only 11.0% of tasks, opening new opportunities for advancing agentic coding. Moreover, benefiting from our automated task collection toolkit, FeatureBench can be easily scaled and updated over time to mitigate data leakage. The inherent verifiability of constructed environments also makes our method potentially valuable for agent training.

Large Language Models (LLMs) have catalyzed vibe coding, where users leverage LLMs to generate and iteratively refine code through natural language interactions until it passes their vibe check. Vibe check is tied to real-world human preference and goes beyond functionality: the solution should feel right, read cleanly, preserve intent, and remain correct. However, current code evaluation remains anchored to pass@k and captures only functional correctness, overlooking the non-functional instructions that users routinely apply. In this paper, we hypothesize that instruction following is the missing piece underlying vibe check that represents human preference in coding besides functional correctness. To quantify models' code instruction following capabilities with measurable signals, we present VeriCode, a taxonomy of 30 verifiable code instructions together with corresponding deterministic verifiers. We use the taxonomy to augment established evaluation suites, resulting in Vibe Checker, a testbed to assess both code instruction following and functional correctness. Upon evaluating 31 leading LLMs, we show that even the strongest models struggle to comply with multiple instructions and exhibit clear functional regression. Most importantly, a composite score of functional correctness and instruction following correlates the best with human preference, with the latter emerging as the primary differentiator on real-world programming tasks. Our work identifies core factors of the vibe check, providing a concrete path for benchmarking and developing models that better align with user preferences in coding.

Pre-trained models for Natural Languages (NL) like BERT and GPT have been recently shown to transfer well to Programming Languages (PL) and largely benefit a broad set of code-related tasks. Despite their success, most current methods either rely on an encoder-only (or decoder-only) pre-training that is suboptimal for generation (resp. understanding) tasks or process the code snippet in the same way as NL, neglecting the special characteristics of PL such as token types. We present CodeT5, a unified pre-trained encoder-decoder Transformer model that better leverages the code semantics conveyed from the developer-assigned identifiers. Our model employs a unified framework to seamlessly support both code understanding and generation tasks and allows for multi-task learning. Besides, we propose a novel identifier-aware pre-training task that enables the model to distinguish which code tokens are identifiers and to recover them when they are masked. Furthermore, we propose to exploit the user-written code comments with a bimodal dual generation task for better NL-PL alignment. Comprehensive experiments show that CodeT5 significantly outperforms prior methods on understanding tasks such as code defect detection and clone detection, and generation tasks across various directions including PL-NL, NL-PL, and PL-PL. Further analysis reveals that our model can better capture semantic information from code. Our code and pre-trained models are released at https: //github.com/salesforce/CodeT5 .

Multi-video event understanding demands models that can locate and attribute query-relevant evidence scattered across long, heterogeneous video corpora. Existing large vision-language models (LVLMs) often underperform in this regime because they quickly exhaust their context budget and struggle to precisely localize evidentially important segments, frequently missing dense informational cues such as broadcast graphics, subtitles, and scoreboards. We introduce TRACE, an evidence grounding-guided framework that follows a ground-before-reasoning strategy for multi-video event reasoning. Our approach first builds a structured, text-searchable timeline for each video using OCR and object detection. A text-only LLM then conducts query-aware evidence localization, selecting relevant moments prior to any downstream visual reasoning. The retrieved frames and their grounding summaries are subsequently used to steer LVLM-based claim generation and cross-video citation consolidation. Experiments on MAGMaR 2026 and WikiVideo demonstrate that structured grounding markedly boosts factual completeness and attribution fidelity. On the MAGMaR validation split, TRACE raises macro-average MiRAGE F1 from 0.705 to 0.811 compared to an unguided Qwen3-VL-30B baseline, with especially strong improvements in citation recall from 0.440 to 0.628. The method also attains state-of-the-art results on the official MAGMaR 2026 leaderboard. Code is released at https://github.com/pengyu965/TRACE.

Code generation with large language models has shown significant promise, especially when employing retrieval-augmented generation (RAG) with few-shot examples. However, selecting effective examples that enhance generation quality remains a challenging task, particularly when the target programming language (PL) is underrepresented. In this study, we present two key findings: (1) retrieving examples whose presented algorithmic plans can be referenced for generating the desired behavior significantly improves generation accuracy, and (2) converting code into pseudocode effectively captures such algorithmic plans, enhancing retrieval quality even when the source and the target PLs are different. Based on these findings, we propose Plan-as-query Example Retrieval for few-shot prompting in Code generation (PERC), a novel framework that utilizes algorithmic plans to identify and retrieve effective examples. We validate the effectiveness of PERC through extensive experiments on the CodeContests, HumanEval and MultiPL-E benchmarks: PERC consistently outperforms the state-of-the-art RAG methods in code generation, both when the source and target programming languages match or differ, highlighting its adaptability and robustness in diverse coding environments.

Repository-level coding benchmarks such as SWE-bench have driven a rapid surge in the capabilities of coding agents. Yet they usually treat coding tasks as a holistic, binary prediction problem (e.g., resolved or unresolved), neglecting fine-grained agent capabilities such as repository understanding, context retrieval, code localization, and bug diagnosis. In this paper, we introduce SWE-Explore, a benchmark that isolates the evaluation of repository exploration, a critical capability of coding agents. Given a repository and an issue, SWE-Explore asks an explorer to return a ranked list of relevant code regions under a fixed line budget. SWE-Explore covers 848 issues across 10 programming languages and 203 open-source repositories. For each instance, we derive line-level ground truth from independent agent trajectories that successfully solved the same issue, distilling the specific code regions their solution paths actually consulted. We evaluate exploration along coverage, ranking, and context-efficiency dimensions, showing that these metrics strongly track downstream repair behavior. Across a broad set of retrieval methods, general coding agents, and specialized localizers, we find that agentic explorers form a clear tier above classical retrieval. While file-level localization is already strong for modern methods, line-level coverage and efficient ranking remain the key axes differentiating state-of-the-art explorers.

Although recent tool-augmented benchmarks involve complex requests, evaluation remains limited to answer matching, neglecting critical trajectory aspects like efficiency, hallucination, and adaptivity. The most straightforward method for evaluation is to compare an agent's trajectory with the ground-truth, but annotating all valid ground-truth trajectories is prohibitively expensive. In this manner, we introduce TRACE, a reference-free framework for the multi-dimensional evaluation of tool-augmented LLMs. By incorporating an evidence bank which accumulates knowledge from preceding steps, TRACE assesses an agent's reasoning trajectory effectively. To validate our framework, we develop a new meta-evaluation dataset with diverse and flawed trajectories, each labeled with multi-faceted performance scores. Our results confirm that TRACE accurately evaluates complex trajectories even with small open-source LLMs. Furthermore, we apply our method to evaluate the trajectories that agents produce while solving tool-augmented tasks, presenting previously unreported observations and their corresponding insights.

Agent Skills package procedural instructions and checks for use by general-purpose agents, but loading a skill does not guarantee that every requirement remains active throughout a long tool-using trajectory. We study this problem in a production-derived, white-box code-audit workflow. Holding the task and 24 artifact checks fixed, we vary the surrounding context and classify where failures first become visible: lost requirements, editing drift, failed checking, or non-agent evaluator/runtime failures. Codex with gpt-5.4-mini passes 8/10 runs in a 10,991-character clean context but only 3/10 in both a 299,140-character relevant context and an equal-length irrelevant context. This 50-percentage-point difference is large but remains trend-level under two-sided Fisher tests (p = 0.0698). Requirement coverage nevertheless stays above 92% in both long conditions, showing that a few omissions can invalidate an otherwise complete artifact. A second task passes all clean and long runs, so the evidence does not support a universal context-length threshold. A detailed external checklist passes 10/10 runs, compared with 5/10 for a generic self-check (p = 0.0325). Coding-agent scaffolds may help by selecting a smaller working set, but they do not eliminate failures. We do not introduce context rot or a new general monitoring method; we provide a bounded failure classification and empirical case study for white-box code auditing.

Agentic red-teaming benchmarks report whether an injected agent was compromised as a single bit: the attack succeeded, or it did not. We argue that this binary attack-success rate discards the information a defender most needs, namely how harmful the resulting action was. We introduce an action-graded harm rubric that scores an agent's tool-call trajectory on a seven-level ordinal scale (L0 to L6) according to whether the executed action was reversible, whether it crossed scope to reach another party, and whether it expanded privilege. We compute the scale two ways: a deterministic oracle that reads the trajectory and the attacker's stated goal, and a panel of three frontier language-model judges that read a tag-free account of the same trajectory. Across four victim models and two defenses on the AgentDojo workspace suite, severity grading exposes three cases the binary metric hides, including a defense that reports a zero attack-success rate while still permitting an externally visible cross-scope leak through an unfiltered tool. The judge panel reproduces the oracle with high ordinal agreement (Krippendorff's alpha = 0.91) but shares systematic blind spots that we characterize, most notably a failure to recognize escalation chains. Unlike prior work that provides harm taxonomies, harmful-task completion tests, execution-level safety benchmarks, or severity-aware simulation, our contribution is a reusable, trace-grounded severity instrument applied to the actual actions recorded in existing red-team logs. All code, prompts, and per-episode logs are released.

Code diffusion models generate code by iteratively removing noise from the latent representation of a code snippet. During later steps of the diffusion process, when the code snippet has almost converged, differences between discrete representations of these snippets look like last-mile repairs applied to broken or incomplete code. We evaluate the extent to which this resemblance can be exploited to leverage pre-trained code diffusion models for the problem of last-mile repair by considering two applications with significant potential. First, we can leverage the diffusion model for last-mile repair by adding noise to a broken code snippet and resuming the diffusion process. Second, we can leverage the diffusion model to generate arbitrary amount of training data for last-mile repair tasks (that are computationally more efficient) by sampling an intermediate program (input) and the final program (output) from the diffusion process. We perform experiments on 3 domains (Python, Excel and PowerShell) to evaluate applications, as well as analyze properties.

Open source code is considered a common practice in modern software development. However, reusing other code allows bad actors to access a wide developers' community, hence the products that rely on it. Those attacks are categorized as supply chain attacks. Recent years saw a growing number of supply chain attacks that leverage open source during software development, relaying the download and installation procedures, whether automatic or manual. Over the years, many approaches have been invented for detecting vulnerable packages. However, it is uncommon to detect malicious code within packages. Those detection approaches can be broadly categorized as analyzes that use (dynamic) and do not use (static) code execution. Here, we introduce Malicious Source code Detection using Transformers (MSDT) algorithm. MSDT is a novel static analysis based on a deep learning method that detects real-world code injection cases to source code packages. In this study, we used MSDT and a dataset with over 600,000 different functions to embed various functions and applied a clustering algorithm to the resulting vectors, detecting the malicious functions by detecting the outliers. We evaluated MSDT's performance by conducting extensive experiments and demonstrated that our algorithm is capable of detecting functions that were injected with malicious code with precision@k values of up to 0.909.

Universal Multimodal Retrieval requires unified embedding models capable of interpreting diverse user intents, ranging from simple keywords to complex compositional instructions. While Multimodal Large Language Models (MLLMs) possess strong reasoning capabilities, prevailing adaptations confine them to static encoders, underutilizing their generative potential. This encoder-only paradigm struggles with complex intents that demand logical deduction rather than superficial pattern matching. To address this, we introduce TRACE (Task-adaptive Reasoning And Compressing Embeddings). TRACE unifies generative reasoning with discriminative representation learning. It first generates a structured Chain-of-Thought (CoT) to explicitly reason about the query, and subsequently compresses this reasoning trace into a compact embedding via a dedicated token. To train this framework, we construct M-BEIR-CoT, a large-scale dataset featuring a difficulty-aware routing strategy. Experiments on the M-BEIR benchmark establish TRACE as the new state-of-the-art. Crucially, TRACE demonstrates a learned implicit routing behavior. It autonomously activates reasoning for complex queries while bypassing it for simpler ones, achieving an optimal balance between retrieval accuracy and inference throughput. Furthermore, by internalizing the deductive process, TRACE exhibits remarkable zero-shot transferability to unseen domains and novel constraints.

Code clones are pairs of code snippets that implement similar functionality. Clone detection is a fundamental branch of automatic source code comprehension, having many applications in refactoring recommendation, plagiarism detection, and code summarization. A particularly interesting case of clone detection is the detection of semantic clones, i.e., code snippets that have the same functionality but significantly differ in implementation. A promising approach to detecting semantic clones is contrastive learning (CL), a machine learning paradigm popular in computer vision but not yet commonly adopted for code processing. Our work aims to evaluate the most popular CL algorithms combined with three source code representations on two tasks. The first task is code clone detection, which we evaluate on the POJ-104 dataset containing implementations of 104 algorithms. The second task is plagiarism detection. To evaluate the models on this task, we introduce CodeTransformator, a tool for transforming source code. We use it to create a dataset that mimics plagiarised code based on competitive programming solutions. We trained nine models for both tasks and compared them with six existing approaches, including traditional tools and modern pre-trained neural models. The results of our evaluation show that proposed models perform diversely in each task, however the performance of the graph-based models is generally above the others. Among CL algorithms, SimCLR and SwAV lead to better results, while Moco is the most robust approach. Our code and trained models are available at https://doi.org/10.5281/zenodo.6360627, https://doi.org/10.5281/zenodo.5596345.

Python is one of the fastest-growing programming languages and currently ranks as the top language in many lists, even recently overtaking JavaScript as the top language on GitHub. Given its importance in data science and machine learning, it is imperative to be able to effectively train LLMs to generate good unit test cases for Python code. This motivates the need for a large dataset to provide training and testing data. To date, while other large datasets exist for languages like Java, none publicly exist for Python. Python poses difficult challenges in generating such a dataset, due to its less rigid naming requirements. In this work, we consider two commonly used Python unit testing frameworks: Pytest and unittest. We analyze a large corpus of over 88K open-source GitHub projects utilizing these testing frameworks. Using a carefully designed set of heuristics, we are able to locate over 22 million test methods. We then analyze the test and non-test code and map individual unit tests to the focal method being tested. This provides an explicit traceability link from the test to the tested method. Our pyMethods2Test dataset contains over 2 million of these focal method mappings, as well as the ability to generate useful context for input to LLMs. The pyMethods2Test dataset is publicly available on Zenodo at: https://doi.org/10.5281/zenodo.14264518

Large Language Models (LLMs), such as GPT-4, StarCoder, and CodeLlama, are transforming the way developers approach programming by automatically generating code based on given natural language descriptions. Despite advancements, generating syntactically and semantically correct code remains challenging, especially for complex programming tasks. Existing approaches typically generate multiple candidate solutions using LLMs to increase the likelihood of producing correct code. However, selecting the correct code from these candidates-a process known as code ranking-remains a major challenge. Current research on code ranking can be categorized into execution-based and non-execution-based methods. Execution-based methods, although effective, encounter notable limitations, such as scarcity of quality unit tests and security risks. Non-execution-based methods like CodeRanker, which rely solely on classification labels to train a code ranker, struggle to capture subtle errors and provide detailed error insights. Recognizing the strengths and limitations of both approaches, we propose a new method. The key insight of our work is that an effective code ranker is expected to truly comprehend the underlying causes of erroneous code, as relying solely on classification labels is insufficient. Inspired by this, this paper puts forward RankEF, an innovative approach for code ranking that leverages execution feedback. RankEF employs multi-task learning to integrate code classification with execution feedback generation. This approach enables the model to understand the reasons behind incorrect code, distinguishing between correct and incorrect solutions without the need to execute the code during the ranking phase. Experiments on three code generation benchmarks demonstrate that RankEF significantly outperforms the state-of-the-art CodeRanker.

Large language models of code (Code-LLMs) have recently brought tremendous advances to code completion, a fundamental feature of programming assistance and code intelligence. However, most existing works ignore the possible presence of bugs in the code context for generation, which are inevitable in software development. Therefore, we introduce and study the buggy-code completion problem, inspired by the realistic scenario of real-time code suggestion where the code context contains potential bugs -- anti-patterns that can become bugs in the completed program. To systematically study the task, we introduce two datasets: one with synthetic bugs derived from semantics-altering operator changes (buggy-HumanEval) and one with realistic bugs derived from user submissions to coding problems (buggy-FixEval). We find that the presence of potential bugs significantly degrades the generation performance of the high-performing Code-LLMs. For instance, the passing rates of CodeGen-2B-mono on test cases of buggy-HumanEval drop more than 50% given a single potential bug in the context. Finally, we investigate several post-hoc methods for mitigating the adverse effect of potential bugs and find that there remains a large gap in post-mitigation performance.

This paper presents a novel framework for automated code generation and debugging, designed to improve accuracy, efficiency, and scalability in software development. The proposed system integrates three core components LangGraph, GLM4 Flash, and ChromaDB within a four step iterative workflow to deliver robust performance and seamless functionality. LangGraph serves as a graph-based library for orchestrating tasks, providing precise control and execution while maintaining a unified state object for dynamic updates and consistency. It supports multi-agent, hierarchical, and sequential processes, making it highly adaptable to complex software engineering workflows. GLM4 Flash, a large language model, leverages its advanced capabilities in natural language understanding, contextual reasoning, and multilingual support to generate accurate code snippets based on user prompts. ChromaDB acts as a vector database for semantic search and contextual memory storage, enabling the identification of patterns and the generation of context-aware bug fixes based on historical data. The system operates through a structured four-step process: (1) Code Generation, which translates natural language descriptions into executable code; (2) Code Execution, which validates the code by identifying runtime errors and inconsistencies; (3) Code Repair, which iteratively refines buggy code using ChromaDB's memory capabilities and LangGraph's state tracking; and (4) Code Update, which ensures the code meets functional and performance requirements through iterative modifications.

The exorbitant cost of training Large language models (LLMs) from scratch makes it essential to fingerprint the models to protect intellectual property via ownership authentication and to ensure downstream users and developers comply with their license terms (e.g. restricting commercial use). In this study, we present a pilot study on LLM fingerprinting as a form of very lightweight instruction tuning. Model publisher specifies a confidential private key and implants it as an instruction backdoor that causes the LLM to generate specific text when the key is present. Results on 11 popularly-used LLMs showed that this approach is lightweight and does not affect the normal behavior of the model. It also prevents publisher overclaim, maintains robustness against fingerprint guessing and parameter-efficient training, and supports multi-stage fingerprinting akin to MIT License. Code is available in https://cnut1648.github.io/Model-Fingerprint/.