Daily Papers

Kronecker adapters have emerged as a promising approach for fine-tuning large-scale models, enabling high-rank updates through tunable component structures. However, existing work largely treats the component structure as a fixed or heuristic design choice, leaving the dimensions and number of Kronecker components underexplored. In this paper, we identify component structure as a key factor governing the capacity of Kronecker adapters. We perform a fine-grained analysis of both the dimensions and number of Kronecker components. In particular, we show that the alignment between Kronecker adapters and full fine-tuning depends on component configurations. Guided by these insights, we propose Component Designed Kronecker Adapters (CDKA). We further provide parameter-budget-aware configuration guidelines and a tailored training stabilization strategy for practical deployment. Experiments across various architectures and modalities demonstrate the effectiveness of CDKA. Code is available at https://github.com/rainstonee/CDKA.

Causal discovery with latent confounders is an important but challenging task in many scientific areas. Despite the success of some overcomplete independent component analysis (OICA) based methods in certain domains, they are computationally expensive and can easily get stuck into local optima. We notice that interestingly, by making use of higher-order cumulants, there exists a closed-form solution to OICA in specific cases, e.g., when the mixing procedure follows the One-Latent-Component structure. In light of the power of the closed-form solution to OICA corresponding to the One-Latent-Component structure, we formulate a way to estimate the mixing matrix using the higher-order cumulants, and further propose the testable One-Latent-Component condition to identify the latent variables and determine causal orders. By iteratively removing the share identified latent components, we successfully extend the results on the One-Latent-Component structure to the Multi-Latent-Component structure and finally provide a practical and asymptotically correct algorithm to learn the causal structure with latent variables. Experimental results illustrate the asymptotic correctness and effectiveness of the proposed method.

The foundation of reproducible science lies in protocols that are precise, logically ordered, and executable. The autonomous generation of these protocols through natural language queries could greatly improve the efficiency of the reproduction process. However, current leading large language models (LLMs) often generate incomplete or inconsistent protocols, limiting their utility. To address this limitation, we first introduce SciRecipe, a large-scale dataset of over 12K structured protocols spanning 27 biological subfields and encompassing both comprehension and problem-solving tasks. To further improve protocol generation, we propose the "Sketch-and-Fill" paradigm, which separates analysis, structuring, and expression to ensure each step is explicit and verifiable. Complementing this, the structured component-based reward mechanism evaluates step granularity, action order, and semantic fidelity, aligning model optimization with experimental reliability. Building on these components, we develop Thoth, trained through a staged Knowledge-to-Action process that progresses from knowledge acquisition to operational reasoning and ultimately to robust, executable protocol generation. Across multiple benchmarks, Thoth consistently surpasses both proprietary and open-source LLMs, achieving significant improvements in step alignment, logical sequencing, and semantic accuracy. Our approach paves the way for reliable scientific assistants that bridge knowledge with experimental execution. All data, code, and models will be released publicly.

In this paper, we study a class of composite optimization problems whose objective function is given by the summation of a general smooth and nonsmooth component, together with a relatively simple nonsmooth term. While restart strategies are commonly employed in first-order methods to achieve optimal convergence under strong convexity, they introduce structural complexity and practical overhead, making algorithm design and nesting cumbersome. To address this, we propose a restart-free stochastic gradient sliding algorithm that eliminates the need for explicit restart phases when the simple nonsmooth component is strongly convex. Through a novel and carefully designed parameter selection strategy, we prove that the proposed algorithm achieves an ε-solution with only O(log(1ε)) gradient evaluations for the smooth component and O(1ε) stochastic subgradient evaluations for the nonsmooth component, matching the optimal complexity of existing multi-phase (restart-based) methods. Moreover, for the case where the nonsmooth component is structured, allowing the overall problem to be reformulated as a bilinear saddle-point problem, we develop a restart-free accelerated stochastic gradient sliding algorithm. We show that the resulting method requires only O(log(1ε)) gradient computations for the smooth component while preserving an overall iteration complexity of O(1{sqrtε}) for solving the corresponding saddle-point problems. Our work thus provides simpler, restart-f

Ligand strain energy, the energy difference between the bound and unbound conformations of a ligand, is an important component of structure-based small molecule drug design. A large majority of observed ligands in protein-small molecule co-crystal structures bind in low-strain conformations, making strain energy a useful filter for structure-based drug design. In this work we present a tool for calculating ligand strain with a high accuracy. StrainRelief uses a MACE Neural Network Potential (NNP), trained on a large database of Density Functional Theory (DFT) calculations to estimate ligand strain of neutral molecules with quantum accuracy. We show that this tool estimates strain energy differences relative to DFT to within 1.4 kcal/mol, more accurately than alternative NNPs. These results highlight the utility of NNPs in drug discovery, and provide a useful tool for drug discovery teams.

While Multimodal Large Language Models (MLLMs) have advanced GUI navigation agents, current approaches face limitations in cross-domain generalization and effective history utilization. We present a reasoning-enhanced framework that systematically integrates structured reasoning, action prediction, and history summarization. The structured reasoning component generates coherent Chain-of-Thought analyses combining progress estimation and decision reasoning, which inform both immediate action predictions and compact history summaries for future steps. Based on this framework, we train a GUI agent, GUI-Rise, through supervised fine-tuning on pseudo-labeled trajectories and reinforcement learning with Group Relative Policy Optimization (GRPO). This framework employs specialized rewards, including a history-aware objective, directly linking summary quality to subsequent action performance. Comprehensive evaluations on standard benchmarks demonstrate state-of-the-art results under identical training data conditions, with particularly strong performance in out-of-domain scenarios. These findings validate our framework's ability to maintain robust reasoning and generalization across diverse GUI navigation tasks. Code is available at https://leon022.github.io/GUI-Rise.

Recipe generation from food images and ingredients is a challenging task, which requires the interpretation of the information from another modality. Different from the image captioning task, where the captions usually have one sentence, cooking instructions contain multiple sentences and have obvious structures. To help the model capture the recipe structure and avoid missing some cooking details, we propose a novel framework: Decomposing Generation Networks (DGN) with structure prediction, to get more structured and complete recipe generation outputs. Specifically, we split each cooking instruction into several phases, and assign different sub-generators to each phase. Our approach includes two novel ideas: (i) learning the recipe structures with the global structure prediction component and (ii) producing recipe phases in the sub-generator output component based on the predicted structure. Extensive experiments on the challenging large-scale Recipe1M dataset validate the effectiveness of our proposed model, which improves the performance over the state-of-the-art results.

We present a new task and dataset, ScreenQA, for screen content understanding via question answering. The existing screen datasets are focused either on structure and component-level understanding, or on a much higher-level composite task such as navigation and task completion. We attempt to bridge the gap between these two by annotating 86K question-answer pairs over the RICO dataset in hope to benchmark the screen reading comprehension capacity.

While current deep learning systems excel at tasks such as object classification, language processing, and gameplay, few can construct or modify a complex system such as a tower of blocks. We hypothesize that what these systems lack is a "relational inductive bias": a capacity for reasoning about inter-object relations and making choices over a structured description of a scene. To test this hypothesis, we focus on a task that involves gluing pairs of blocks together to stabilize a tower, and quantify how well humans perform. We then introduce a deep reinforcement learning agent which uses object- and relation-centric scene and policy representations and apply it to the task. Our results show that these structured representations allow the agent to outperform both humans and more naive approaches, suggesting that relational inductive bias is an important component in solving structured reasoning problems and for building more intelligent, flexible machines.

Chest X-ray imaging is crucial for diagnosing pulmonary and cardiac diseases, yet its interpretation demands extensive clinical experience and suffers from inter-observer variability. While deep learning models offer high diagnostic accuracy, their black-box nature hinders clinical adoption in high-stakes medical settings. To address this, we propose X-Ray-CoT (Chest X-Ray Chain-of-Thought), a novel framework leveraging Vision-Language Large Models (LVLMs) for intelligent chest X-ray diagnosis and interpretable report generation. X-Ray-CoT simulates human radiologists' "chain-of-thought" by first extracting multi-modal features and visual concepts, then employing an LLM-based component with a structured Chain-of-Thought prompting strategy to reason and produce detailed natural language diagnostic reports. Evaluated on the CORDA dataset, X-Ray-CoT achieves competitive quantitative performance, with a Balanced Accuracy of 80.52% and F1 score of 78.65% for disease diagnosis, slightly surpassing existing black-box models. Crucially, it uniquely generates high-quality, explainable reports, as validated by preliminary human evaluations. Our ablation studies confirm the integral role of each proposed component, highlighting the necessity of multi-modal fusion and CoT reasoning for robust and transparent medical AI. This work represents a significant step towards trustworthy and clinically actionable AI systems in medical imaging.

High-quality, "rich" metadata are essential for making research data findable, interoperable, and reusable. The Center for Expanded Data Annotation and Retrieval (CEDAR) has long addressed this need by providing tools to design machine-actionable metadata templates that encode community standards in a computable form. To make these capabilities more accessible within real-world research workflows, we have developed the CEDAR Embeddable Editor (CEE)-a lightweight, interoperable Web Component that brings structured, standards-based metadata authoring directly into third-party platforms. The CEE dynamically renders metadata forms from machine-actionable templates and produces semantically rich metadata in JSON-LD format. It supports ontology-based value selection via the BioPortal ontology repository, and it includes external authority resolution for persistent identifiers such as ORCIDs for individuals and RORs for research organizations. Crucially, the CEE requires no custom user-interface development, allowing deployment across diverse platforms. The CEE has been successfully integrated into generalist scientific data repositories such as Dryad and the Open Science Framework, demonstrating its ability to support discipline-specific metadata creation. By supporting the embedding of metadata authoring within existing research environments, the CEE can facilitate the adoption of community standards and help improve metadata quality across scientific disciplines.

Generating realistic human motion is a central yet unsolved challenge in video generation. While reinforcement learning (RL)-based post-training has driven recent gains in general video quality, extending it to human motion remains bottlenecked by a reward signal that cannot reliably score motion realism. Existing video rewards primarily rely on 2D perceptual signals, without explicitly modeling the 3D body state, contact, and dynamics underlying articulated human motion, and often assign high scores to videos with floating bodies or physically implausible movements. To address this, we propose PhyMotion, a structured, fine-grained motion reward that grounds recovered 3D human trajectories in a physics simulator and evaluates motion quality along multiple dimensions of physical feasibility. Concretely, we recover SMPL body meshes from generated videos, retarget them onto a humanoid in the MuJoCo physics simulator, and evaluate the resulting motion along three axes: kinematic plausibility, contact and balance consistency, and dynamic feasibility. Each component provides a continuous and interpretable signal tied to a specific aspect of motion quality, allowing the reward to capture which aspects of motion are physically correct or violated. Experiments show that PhyMotion achieves stronger correlation with human judgments than existing reward formulations. These gains carry over to RL-based post-training, where optimizing PhyMotion leads to larger and more consistent improvements than optimizing existing rewards, improving motion realism across both autoregressive and bidirectional video generators under both automatic metrics and blind human evaluation (+68 Elo gain). Ablations show that the three axes provide complementary supervision signals, while the reward preserves overall video generation quality with only modest training overhead.

Tables contain rich structured information, yet when stored as images their contents remain "locked" within pixels. Converting table images into LaTeX code enables faithful digitization and reuse, but current multimodal large language models (MLLMs) often fail to preserve structural, style, or content fidelity. Conventional post-training with reinforcement learning (RL) typically relies on a single aggregated reward, leading to reward ambiguity that conflates multiple behavioral aspects and hinders effective optimization. We propose Component-Specific Policy Optimization (CSPO), an RL framework that disentangles optimization across LaTeX tables components-structure, style, and content. In particular, CSPO assigns component-specific rewards and backpropagates each signal only through the tokens relevant to its component, alleviating reward ambiguity and enabling targeted component-wise optimization. To comprehensively assess performance, we introduce a set of hierarchical evaluation metrics. Extensive experiments demonstrate the effectiveness of CSPO, underscoring the importance of component-specific optimization for reliable structured generation.

Workflows are a fundamental component of automation in enterprise platforms, enabling the orchestration of tasks, data processing, and system integrations. Despite being widely used, building workflows can be complex, often requiring manual configuration through low-code platforms or visual programming tools. To simplify this process, we explore the use of generative foundation models, particularly vision-language models (VLMs), to automatically generate structured workflows from visual inputs. Translating hand-drawn sketches or computer-generated diagrams into executable workflows is challenging due to the ambiguity of free-form drawings, variations in diagram styles, and the difficulty of inferring execution logic from visual elements. To address this, we introduce StarFlow, a framework for generating structured workflow outputs from sketches using vision-language models. We curate a diverse dataset of workflow diagrams -- including synthetic, manually annotated, and real-world samples -- to enable robust training and evaluation. We finetune and benchmark multiple vision-language models, conducting a series of ablation studies to analyze the strengths and limitations of our approach. Our results show that finetuning significantly enhances structured workflow generation, outperforming large vision-language models on this task.

Business Process Model and Notation (BPMN) is a widely adopted standard for representing complex business workflows. While BPMN diagrams are often exchanged as visual images, existing methods primarily rely on XML representations for computational analysis. In this work, we present a pipeline that leverages Vision-Language Models (VLMs) to extract structured JSON representations of BPMN diagrams directly from images, without requiring source model files or textual annotations. We also incorporate optical character recognition (OCR) for textual enrichment and evaluate the generated element lists against ground truth data derived from the source XML files. Our approach enables robust component extraction in scenarios where original source files are unavailable. We benchmark multiple VLMs and observe performance improvements in several models when OCR is used for text enrichment. In addition, we conducted extensive statistical analyses of OCR-based enrichment methods and prompt ablation studies, providing a clearer understanding of their impact on model performance.

Web pages are a valuable source of information for many natural language processing and information retrieval tasks. Extracting the main content from those documents is essential for the performance of derived applications. To address this issue, we introduce a novel model that performs sequence labeling to collectively classify all text blocks in an HTML page as either boilerplate or main content. Our method uses a hidden Markov model on top of potentials derived from DOM tree features using convolutional neural networks. The proposed method sets a new state-of-the-art performance for boilerplate removal on the CleanEval benchmark. As a component of information retrieval pipelines, it improves retrieval performance on the ClueWeb12 collection.

Frontier LLMs can navigate complex websites, but their cost and reliance on third-party APIs make local deployment impractical. We introduce Agent-as-Annotators, a framework that structures synthetic trajectory generation for web agents by analogy to human annotation roles, replacing the Task Designer, Annotator, and Supervisor with modular LLM components. Using Gemini 3 Pro as teacher, we generate 3,000 trajectories across six web environments and fine-tune a 9B-parameter student with pure supervised learning on the 2,322 that pass quality filtering. The resulting model achieves 41.5% on WebArena, surpassing closed-source models such as Claude 3.5 Sonnet (36.0%) and GPT-4o (31.5%) under the same evaluation protocol, and nearly doubling the previous best open-weight result (Go-Browse, 21.7%). Capabilities transfer to unseen environments, with an 18.2 percentage point gain on WorkArena L1 (an enterprise platform never seen during training) and consistent improvements across three additional benchmarks. Ablations confirm that each pipeline component contributes meaningfully, with Judge filtering, evaluation hints, and reasoning traces each accounting for measurable gains. These results demonstrate that structured trajectory synthesis from a single frontier teacher is sufficient to produce competitive, locally deployable web agents. Project page: https://agent-as-annotators.github.io

Designing effective agentic systems requires the seamless composition and integration of agents, tools, and models within dynamic and uncertain environments. Most existing methods rely on static, semantic retrieval approaches for tool or agent discovery. However, effective reuse and composition of existing components remain challenging due to incomplete capability descriptions and the limitations of retrieval methods. Component selection suffers because the decisions are not based on capability, cost, and real-time utility. To address these challenges, we introduce a structured, automated framework for agentic system composition that is inspired by the knapsack problem. Our framework enables a composer agent to systematically identify, select, and assemble an optimal set of agentic components by jointly considering performance, budget constraints, and compatibility. By dynamically testing candidate components and modeling their utility in real-time, our approach streamlines the assembly of agentic systems and facilitates scalable reuse of resources. Empirical evaluation with Claude 3.5 Sonnet across five benchmarking datasets shows that our online-knapsack-based composer consistently lies on the Pareto frontier, achieving higher success rates at significantly lower component costs compared to our baselines. In the single-agent setup, the online knapsack composer shows a success rate improvement of up to 31.6% in comparison to the retrieval baselines. In multi-agent systems, the online knapsack composer increases success rate from 37% to 87% when agents are selected from an agent inventory of 100+ agents. The substantial performance gap confirms the robust adaptability of our method across diverse domains and budget constraints.

VLA models encode visual observations as 2D patch tokens with no intrinsic geometric structure. We introduce GST-VLA with two contributions. First, the Gaussian Spatial Tokenizer (GST) converts frozen dense depth and frozen semantic patch features into N_g{=}128 anisotropic 3D Gaussian primitives, each parameterized by a metric residual mean μin R^3, log-scale covariance log σin R^3, and learned opacity αin (0,1). The covariance eigenstructure encodes local surface orientation, and opacity provides per-primitive geometric confidence, both inaccessible from scalar depth. Spatial attention pooling with learned queries concentrates the fixed token budget on geometrically salient regions rather than distributing uniformly. Second, 3D Depth-Aware Chain-of-Thought (DA-CoT) reasoning supervises four structured intermediate spatial thoughts, covering 3D object grounding, grasp affordance contact geometry, pairwise metric distances, and coarse SE(3) waypoints, as explicit generation targets in the training loss. A cross-attention sublayer at every VLM transformer block provides direct access to the raw 256-primitive Gaussian field during DA-CoT generation. A 300M-parameter flow-matching action expert with mixture-of-experts feedforward sublayers decodes 7-DoF delta action chunks via conditional ODE integration, conditioned on both VLM hidden states and DA-CoT outputs through dual cross-attention. Trained with composite L_flow + L_CoT + L_depth across three progressive stages, GST-VLA achieves 96.4% on LIBERO (+2.0%), and 80.2% on SimplerEnv (+5.4%). Ablations isolate the contribution of each GST component, each DA-CoT thought, and each training stage, confirming independent and synergistic gains concentrated on precision demanding tasks.

We introduce the first metric for evaluating disentanglement at individual hierarchy levels of a structured latent representation. Applied to object-centric generative models, this offers a systematic, unified approach to evaluating (i) object separation between latent slots (ii) disentanglement of object properties inside individual slots (iii) disentanglement of intrinsic and extrinsic object properties. We theoretically show that for structured representations, our framework gives stronger guarantees of selecting a good model than previous disentanglement metrics. Experimentally, we demonstrate that viewing object compositionality as a disentanglement problem addresses several issues with prior visual metrics of object separation. As a core technical component, we present the first representation probing algorithm handling slot permutation invariance.

Perceptual similarity scores that align with human vision are critical for both training and evaluating computer vision models. Deep perceptual losses, such as LPIPS, achieve good alignment but rely on complex, highly non-linear discriminative features with unknown invariances, while hand-crafted measures like SSIM are interpretable but miss key perceptual properties. We introduce the Structured Uncertainty Similarity Score (SUSS); it models each image through a set of perceptual components, each represented by a structured multivariate Normal distribution. These are trained in a generative, self-supervised manner to assign high likelihood to human-imperceptible augmentations. The final score is a weighted sum of component log-probabilities with weights learned from human perceptual datasets. Unlike feature-based methods, SUSS learns image-specific linear transformations of residuals in pixel space, enabling transparent inspection through decorrelated residuals and sampling. SUSS aligns closely with human perceptual judgments, shows strong perceptual calibration across diverse distortion types, and provides localized, interpretable explanations of its similarity assessments. We further demonstrate stable optimization behavior and competitive performance when using SUSS as a perceptual loss for downstream imaging tasks.

Relational structures such as schema linking and schema encoding have been validated as a key component to qualitatively translating natural language into SQL queries. However, introducing these structural relations comes with prices: they often result in a specialized model structure, which largely prohibits using large pretrained models in text-to-SQL. To address this problem, we propose RASAT: a Transformer seq2seq architecture augmented with relation-aware self-attention that could leverage a variety of relational structures while inheriting the pretrained parameters from the T5 model effectively. Our model can incorporate almost all types of existing relations in the literature, and in addition, we propose introducing co-reference relations for the multi-turn scenario. Experimental results on three widely used text-to-SQL datasets, covering both single-turn and multi-turn scenarios, have shown that RASAT could achieve state-of-the-art results across all three benchmarks (75.5% EX on Spider, 52.6% IEX on SParC, and 37.4% IEX on CoSQL).

Highly accurate biomolecular structure prediction is a key component of developing biomolecular foundation models, and one of the most critical aspects of building foundation models is identifying the recipes for scaling the model. In this work, we present SeedFold, a folding model that successfully scales up the model capacity. Our contributions are threefold: first, we identify an effective width-scaling strategy for the Pairformer to increase representation capacity; second, we introduce a novel linear triangular attention that reduces computational complexity to enable efficient scaling; finally, we construct a large-scale distillation dataset to substantially enlarge the training set. Experiments on FoldBench show that SeedFold outperforms AlphaFold3 on most protein-related tasks.

We study the geometric structure of layer updates in deep language models. Rather than analyzing what information is encoded in intermediate representations, we ask how representations change from one layer to the next. We show that layerwise updates admit a decomposition into a dominant tokenwise component and a residual that is not captured by restricted tokenwise function classes. Across multiple architectures, including Transformers and state-space models, we find that the full layer update is almost perfectly aligned with the tokenwise component, while the residual exhibits substantially weaker alignment, larger angular deviation, and significantly lower projection onto the dominant tokenwise subspace. This indicates that the residual is not merely a small correction, but a geometrically distinct component of the transformation. This geometric separation has functional consequences: approximation error under the restricted tokenwise model is strongly associated with output perturbation, with Spearman correlations often exceeding 0.7 and reaching up to 0.95 in larger models. Together, these results suggest that most layerwise updates behave like structured reparameterizations along a dominant direction, while functionally significant computation is concentrated in a geometrically distinct residual component. Our framework provides a simple, architecture-agnostic method for probing the geometric and functional structure of layer updates in modern language models.

Discrete image tokenizers have emerged as a key component of modern vision and multimodal systems, providing a sequential interface for transformer-based architectures. However, most existing approaches remain primarily optimized for reconstruction and compression, often yielding tokens that capture local texture rather than object-level semantic structure. Inspired by the incremental and compositional nature of human communication, we introduce COMmunication inspired Tokenization (COMiT), a framework for learning structured discrete visual token sequences. COMiT constructs a latent message within a fixed token budget by iteratively observing localized image crops and recurrently updating its discrete representation. At each step, the model integrates new visual information while refining and reorganizing the existing token sequence. After several encoding iterations, the final message conditions a flow-matching decoder that reconstructs the full image. Both encoding and decoding are implemented within a single transformer model and trained end-to-end using a combination of flow-matching reconstruction and semantic representation alignment losses. Our experiments demonstrate that while semantic alignment provides grounding, attentive sequential tokenization is critical for inducing interpretable, object-centric token structure and substantially improving compositional generalization and relational reasoning over prior methods.

Semi-structured documents integrate diverse interleaved data elements (e.g., tables, charts, hierarchical paragraphs) arranged in various and often irregular layouts. These documents are widely observed across domains and account for a large portion of real-world data. However, existing methods struggle to support natural language question answering over these documents due to three main technical challenges: (1) The elements extracted by techniques like OCR are often fragmented and stripped of their original semantic context, making them inadequate for analysis. (2) Existing approaches lack effective representations to capture hierarchical structures within documents (e.g., associating tables with nested chapter titles) and to preserve layout-specific distinctions (e.g., differentiating sidebars from main content). (3) Answering questions often requires retrieving and aligning relevant information scattered across multiple regions or pages, such as linking a descriptive paragraph to table cells located elsewhere in the document. To address these issues, we propose MoDora, an LLM-powered system for semi-structured document analysis. First, we adopt a local-alignment aggregation strategy to convert OCR-parsed elements into layout-aware components, and conduct type-specific information extraction for components with hierarchical titles or non-text elements. Second, we design the Component-Correlation Tree (CCTree) to hierarchically organize components, explicitly modeling inter-component relations and layout distinctions through a bottom-up cascade summarization process. Finally, we propose a question-type-aware retrieval strategy that supports (1) layout-based grid partitioning for location-based retrieval and (2) LLM-guided pruning for semantic-based retrieval. Experiments show MoDora outperforms baselines by 5.97%-61.07% in accuracy. The code is at https://github.com/weAIDB/MoDora.

Single-shot neural decoders commit to answers without iterative refinement, while chain-of-thought methods introduce discrete intermediate steps but lack a scalar measure of reasoning progress. We propose Energy-Based Reasoning via Structured Latent Planning (EBRM), which models reasoning as gradient-based optimization of a multi-step latent trajectory z_{1:T} under a learned energy function E(h_x, z). The energy decomposes into per-step compatibility, transition consistency, and trajectory smoothness terms. Training combines supervised encoder-decoder learning with contrastive energy shaping using hard negatives, while inference performs gradient descent or Langevin dynamics over z and decodes from z_T. We identify a critical failure mode: on CNF logic satisfaction, latent planning reduces accuracy from approx 95% to approx 56%. This degradation arises from a distribution mismatch, where the decoder is trained on encoder outputs h_x but evaluated on planner outputs z_T that drift into unseen latent regions. We analyze this behavior through per-step decoding, latent drift tracking, and gradient decomposition. To address it, we propose dual-path decoder training and latent anchoring. We further introduce a six-part ablation protocol covering component contributions, trajectory length, planner dynamics, initialization, decoder training distribution, and anchor weight. Experiments on three synthetic tasks show that energy decreases monotonically and induces structured latent trajectories on graph and logic tasks, while remaining flat on arithmetic (r = 0.073), indicating a negative result. Code is available at https://github.com/dkjo8/ebr-via-structured-latent-planning.

LLM-based autonomous agents lack persistent procedural memory: they re-derive solutions from scratch even when structurally identical tasks have been solved before. We present APEX-EM, a non-parametric online learning framework that accumulates, retrieves, and reuses structured procedural plans without modifying model weights. APEX-EM introduces: (1) a structured experience representation encoding the full procedural-episodic trace of each execution -- planning steps, artifacts, iteration history with error analysis, and quality scores; (2) a Plan-Retrieve-Generate-Iterate-Ingest (PRGII) workflow with Task Verifiers providing multi-dimensional reward signals; and (3) a dual-outcome Experience Memory with hybrid retrieval combining semantic search, structural signature matching, and plan DAG traversal -- enabling cross-domain transfer between tasks sharing no lexical overlap but analogous operational structure. Successful experiences serve as positive in-context examples; failures as negative examples with structured error annotations. We evaluate on BigCodeBench, KGQAGen-10k, and Humanity's Last Exam using Claude Sonnet 4.5 and Opus 4.5. On KGQAGen-10k, APEX-EM achieves 89.6% accuracy versus 41.3% without memory (+48.3pp), surpassing the oracle-retrieval upper bound (84.9%). On BigCodeBench, it reaches 83.3% SR from a 53.9% baseline (+29.4pp), exceeding MemRL's +11.0pp gain under comparable frozen-backbone conditions (noting backbone differences controlled for in our analysis). On HLE, entity graph retrieval reaches 48.0% from 25.2% (+22.8pp). Ablations show component value is task-dependent: rich judge feedback is negligible for code generation but critical for structured queries (+10.3pp), while binary-signal iteration partially compensates for weaker feedback.

Recently, multimodal large language models (MLLMs) have attracted increasing research attention due to their powerful visual understanding capabilities. While they have achieved impressive results on various vision tasks, their performance on chart-to-code generation remains suboptimal. This task requires MLLMs to generate executable code that can reproduce a given chart, demanding not only precise visual understanding but also accurate translation of visual elements into structured code. Directly prompting MLLMs to perform this complex task often yields unsatisfactory results. To address this challenge, we propose {ChartIR}, an iterative refinement method based on structured instruction. First, we distinguish two tasks: visual understanding and code translation. To accomplish the visual understanding component, we design two types of structured instructions: description and difference. The description instruction captures the visual elements of the reference chart, while the difference instruction characterizes the discrepancies between the reference chart and the generated chart. These instructions effectively transform visual features into language representations, thereby facilitating the subsequent code translation process. Second, we decompose the overall chart generation pipeline into two stages: initial code generation and iterative refinement, enabling progressive enhancement of the final output. Experimental results show that, compared to other method, our method achieves superior performance on both the open-source model Qwen2-VL and the closed-source model GPT-4o.

Interpreting chest X-rays is inherently challenging due to the overlap between anatomical structures and the subtle presentation of many clinically significant pathologies, making accurate diagnosis time-consuming even for experienced radiologists. Recent radiology-focused foundation models, such as LLaVA-Rad and Maira-2, have positioned multi-modal large language models (MLLMs) at the forefront of automated radiology report generation (RRG). However, despite these advances, current foundation models generate reports in a single forward pass. This decoding strategy diminishes attention to visual tokens and increases reliance on language priors as generation proceeds, which in turn introduces spurious pathology co-occurrences in the generated reports. To mitigate these limitations, we propose Category-Wise Contrastive Decoding (CWCD), a novel and modular framework designed to enhance structured radiology report generation (SRRG). Our approach introduces category-specific parameterization and generates category-wise reports by contrasting normal X-rays with masked X-rays using category-specific visual prompts. Experimental results demonstrate that CWCD consistently outperforms baseline methods across both clinical efficacy and natural language generation metrics. An ablation study further elucidates the contribution of each architectural component to overall performance.

Generating novel and creative scientific hypotheses is a cornerstone in achieving Artificial General Intelligence. Large language and reasoning models have the potential to aid in the systematic creation, selection, and validation of scientifically informed hypotheses. However, current foundation models often struggle to produce scientific ideas that are both novel and feasible. One reason is the lack of a dedicated dataset that frames Scientific Hypothesis Generation (SHG) as a Natural Language Generation (NLG) task. In this paper, we introduce HypoGen, the first dataset of approximately 5500 structured problem-hypothesis pairs extracted from top-tier computer science conferences structured with a Bit-Flip-Spark schema, where the Bit is the conventional assumption, the Spark is the key insight or conceptual leap, and the Flip is the resulting counterproposal. HypoGen uniquely integrates an explicit Chain-of-Reasoning component that reflects the intellectual process from Bit to Flip. We demonstrate that framing hypothesis generation as conditional language modelling, with the model fine-tuned on Bit-Flip-Spark and the Chain-of-Reasoning (and where, at inference, we only provide the Bit), leads to improvements in the overall quality of the hypotheses. Our evaluation employs automated metrics and LLM judge rankings for overall quality assessment. We show that by fine-tuning on our HypoGen dataset we improve the novelty, feasibility, and overall quality of the generated hypotheses. The HypoGen dataset is publicly available at huggingface.co/datasets/UniverseTBD/hypogen-dr1.

We formalize and enable the task of open tree decomposition, which segments an image into hierarchical trees of visual components with unconstrained granularity and flexibility. Specifically, we provide the foundation benchmark for this new paradigm with the following three key contributions. First, we overcome the prohibitively high cognitive and physical bottlenecks of manual annotation by developing a fully automated generation pipeline that synergizes the semantic reasoning of Large Vision-Language Models (LVLMs) with the precise geometric grounding of SAM 3. Second, leveraging this pipeline, we construct COCOTree, a massive-scale benchmark featuring over 21K images and 1.8M structural nodes. By embracing an open-vocabulary space of over 3.5K unique labels, it successfully captures the long-tail distribution of complex physical assemblies. Notably, rigorous human evaluation confirms our generated annotations demonstrate strong alignment with human structural judgment. Third, we establish a standardized evaluation protocol by proposing the Open Tree Quality (OTQ) metric, which jointly assesses mask precision, label accuracy, and structural consistency. We release our dataset and benchmark code at https://github.com/melonkick3090/COCOTree.

Attention based language models have become a critical component in state-of-the-art natural language processing systems. However, these models have significant computational requirements, due to long training times, dense operations and large parameter count. In this work we demonstrate a set of modifications to the structure of a Transformer layer, producing a more efficient architecture. First, we add a convolutional module to complement the self-attention module, decoupling the learning of local and global interactions. Secondly, we rely on grouped transformations to reduce the computational cost of dense feed-forward layers and convolutions, while preserving the expressivity of the model. We apply the resulting architecture to language representation learning and demonstrate its superior performance compared to BERT models of different scales. We further highlight its improved efficiency, both in terms of floating-point operations (FLOPs) and time-to-train.

In recent years, the use of multi-modal pre-trained Transformers has led to significant advancements in visually-rich document understanding. However, existing models have mainly focused on features such as text and vision while neglecting the importance of layout relationship between text nodes. In this paper, we propose GraphLayoutLM, a novel document understanding model that leverages the modeling of layout structure graph to inject document layout knowledge into the model. GraphLayoutLM utilizes a graph reordering algorithm to adjust the text sequence based on the graph structure. Additionally, our model uses a layout-aware multi-head self-attention layer to learn document layout knowledge. The proposed model enables the understanding of the spatial arrangement of text elements, improving document comprehension. We evaluate our model on various benchmarks, including FUNSD, XFUND and CORD, and achieve state-of-the-art results among these datasets. Our experimental results demonstrate that our proposed method provides a significant improvement over existing approaches and showcases the importance of incorporating layout information into document understanding models. We also conduct an ablation study to investigate the contribution of each component of our model. The results show that both the graph reordering algorithm and the layout-aware multi-head self-attention layer play a crucial role in achieving the best performance.

We report the discovery of bimodal structure in the drift rate distribution of upward-drifting burst clusters from the hyperactive repeating fast radio burst FRB 20240114A. Using unsupervised machine learning (UMAP dimensionality reduction combined with HDBSCAN density-based clustering) applied to 233 upward-drifting burst clusters from the FAST telescope dataset, we identify a distinct subpopulation of 45 burst clusters (Cluster C1) with mean drift rates 2.5x higher than typical upward-drifting burst clusters (245.6 vs 98.1 MHz/ms). Gaussian mixture modeling reveals strong evidence for bimodality (delta-BIC = 296.6), with clearly separated modes (Ashman's D = 2.70 > 2) and a statistically significant gap in the distribution (11.3 sigma). Crucially, we demonstrate that this bimodality persists when restricting the analysis to single-component (U1) burst clusters only (delta-BIC = 19.9, Ashman's D = 2.71), confirming that the result is not an artifact of combining single- and multi-component burst clusters with different drift rate definitions. The extreme-drift subpopulation also exhibits systematically lower peak frequencies (-7%), shorter durations (-29%), and distinct clustering in multi-dimensional feature space. These findings are suggestive of two spatially separated emission regions in the magnetosphere, each producing upward-drifting burst clusters with distinct physical characteristics, although confirmation requires observations from additional epochs and sources.

Inversion-free image editing using flow-based generative models challenges the prevailing inversion-based pipelines. However, existing approaches rely on fixed Gaussian noise to construct the source trajectory, leading to biased trajectory dynamics and causing structural degradation or quality loss. To address this, we introduce SNR-Edit, a training-free framework achieving faithful Latent Trajectory Correction via adaptive noise control. Mechanistically, SNR-Edit uses structure-aware noise rectification to inject segmentation constraints into the initial noise, anchoring the stochastic component of the source trajectory to the real image's implicit inversion position and reducing trajectory drift during source--target transport. This lightweight modification yields smoother latent trajectories and ensures high-fidelity structural preservation without requiring model tuning or inversion. Across SD3 and FLUX, evaluations on PIE-Bench and SNR-Bench show that SNR-Edit delivers performance on pixel-level metrics and VLM-based scoring, while adding only about 1s overhead per image.

Large language model (LLM) contexts are typically constructed using retrieval-augmented generation (RAG), which involves ranking and selecting the top-k passages. The approach causes fragmentation in information graphs in document structures, over-retrieval, and duplication of content alongside insufficient query context, including 2nd and 3rd order facets. In this paper, a structure-informed and diversity-constrained context bubble construction framework is proposed that assembles coherent, citable bundles of spans under a strict token budget. The method preserves and exploits inherent document structure by organising multi-granular spans (e.g., sections and rows) and using task-conditioned structural priors to guide retrieval. Starting from high-relevance anchor spans, a context bubble is constructed through constrained selection that balances query relevance, marginal coverage, and redundancy penalties. It will explicitly constrain diversity and budget, producing compact and informative context sets, unlike top-k retrieval. Moreover, a full retrieval is emitted that traces the scoring and selection choices of the records, thus providing auditability and deterministic tuning. Experiments on enterprise documents demonstrate the efficiency of context bubble as it significantly reduces redundant context, is better able to cover secondary facets and has a better answer quality and citation faithfulness within a limited context window. Ablation studies demonstrate that both structural priors as well as diversity constraint selection are necessary; removing either component results in a decline in coverage and an increase in redundant or incomplete context.

Structure-from-Motion (SfM), a method that recovers camera poses and scene geometry from uncalibrated images, is a central component in robotic reconstruction and simulation. Despite the state-of-the-art performance of traditional SfM methods such as COLMAP and its follow-up work, GLOMAP, naive CPU-specialized implementations of bundle adjustment (BA) or global positioning (GP) introduce significant computational overhead when handling large-scale scenarios, leading to a trade-off between accuracy and speed in SfM. Moreover, the blessing of efficient C++-based implementations in COLMAP and GLOMAP comes with the curse of limited flexibility, as they lack support for various external optimization options. On the other hand, while deep learning based SfM pipelines like VGGSfM and VGGT enable feed-forward 3D reconstruction, they are unable to scale to thousands of input views at once as GPU memory consumption increases sharply as the number of input views grows. In this paper, we unleash the full potential of GPU parallel computation to accelerate each critical stage of the standard SfM pipeline. Building upon recent advances in sparse-aware bundle adjustment optimization, our design extends these techniques to accelerate both BA and GP within a unified global SfM framework. Through extensive experiments on datasets of varying scales (e.g. 5000 images where VGGSfM and VGGT run out of memory), our method demonstrates up to about 40 times speedup over COLMAP while achieving consistently comparable or even improved reconstruction accuracy. Our project page can be found at https://cre185.github.io/InstantSfM/.

Artificial General Intelligence (AGI) Agents and Robots must be able to cope with everchanging environments and tasks. They must be able to actively construct new internal causal models of their interactions with the environment when new structural changes take place in the environment. Thus, we claim that active causal structure learning with latent variables (ACSLWL) is a necessary component to build AGI agents and robots. This paper describes how a complex planning and expectation-based detour behavior can be learned by ACSLWL when, unexpectedly, and for the first time, the simulated robot encounters a sort of transparent barrier in its pathway towards its target. ACSWL consists of acting in the environment, discovering new causal relations, constructing new causal models, exploiting the causal models to maximize its expected utility, detecting possible latent variables when unexpected observations occur, and constructing new structures-internal causal models and optimal estimation of the associated parameters, to be able to cope efficiently with the new encountered situations. That is, the agent must be able to construct new causal internal models that transform a previously unexpected and inefficient (sub-optimal) situation, into a predictable situation with an optimal operating plan.

Structured Natural Language Processing (XNLP) is an important subset of NLP that entails understanding the underlying semantic or syntactic structure of texts, which serves as a foundational component for many downstream applications. Despite certain recent efforts to explore universal solutions for specific categories of XNLP tasks, a comprehensive and effective approach for unifying all XNLP tasks long remains underdeveloped. In the meanwhile, while XNLP demonstration systems are vital for researchers exploring various XNLP tasks, existing platforms can be limited to, e.g., supporting few XNLP tasks, lacking interactivity and universalness. To this end, we propose an advanced XNLP demonstration platform, where we propose leveraging LLM to achieve universal XNLP, with one model for all with high generalizability. Overall, our system advances in multiple aspects, including universal XNLP modeling, high performance, interpretability, scalability, and interactivity, providing a unified platform for exploring diverse XNLP tasks in the community. XNLP is online: https://xnlp.haofei.vip

Attention Deficit Hyperactive Disorder (ADHD) is a common behavioral problem affecting children. In this work, we investigate the automatic classification of ADHD subjects using the resting state Functional Magnetic Resonance Imaging (fMRI) sequences of the brain. We show that the brain can be modeled as a functional network, and certain properties of the networks differ in ADHD subjects from control subjects. We compute the pairwise correlation of brain voxels' activity over the time frame of the experimental protocol which helps to model the function of a brain as a network. Different network features are computed for each of the voxels constructing the network. The concatenation of the network features of all the voxels in a brain serves as the feature vector. Feature vectors from a set of subjects are then used to train a PCA-LDA (principal component analysis-linear discriminant analysis) based classifier. We hypothesized that ADHD-related differences lie in some specific regions of the brain and using features only from those regions is sufficient to discriminate ADHD and control subjects. We propose a method to create a brain mask that includes the useful regions only and demonstrate that using the feature from the masked regions improves classification accuracy on the test data set. We train our classifier with 776 subjects and test on 171 subjects provided by The Neuro Bureau for the ADHD-200 challenge. We demonstrate the utility of graph-motif features, specifically the maps that represent the frequency of participation of voxels in network cycles of length 3. The best classification performance (69.59%) is achieved using 3-cycle map features with masking. Our proposed approach holds promise in being able to diagnose and understand the disorder.

Bayes' rule tells us how to invert a causal process in order to update our beliefs in light of new evidence. If the process is believed to have a complex compositional structure, we may observe that the inversion of the whole can be computed piecewise in terms of the component processes. We study the structure of this compositional rule, noting that it relates to the lens pattern in functional programming. Working in a suitably general axiomatic presentation of a category of Markov kernels, we see how we can think of Bayesian inversion as a particular instance of a state-dependent morphism in a fibred category. We discuss the compositional nature of this, formulated as a functor on the underlying category and explore how this can used for a more type-driven approach to statistical inference.

In the present paper we study the singularity structure of the exterior field of neutron stars with the aid of the four-parameter exact solution of the Einstein-Maxwell equations. The complete analysis of this problem in the generic case becomes possible due to the implementation of the novel analytical approach to the resolution of the singularity condition, and it shows the absence of the ring singularities off the symmetry axis in the positive mass case, as well as the possibility of the removal of the ring singularity by a strong magnetic field in the negative mass case. The solution takes an extraordinarily simple form in the equatorial plane, very similar to that of the Kerr solution, which makes it most suitable for astrophysical applications as the simplest model of a rotating magnetized deformed mass. It also provides a nontrivial example confirming a recent claim that the varphi component of the electromagnetic four-potential has features inconsistent with the intrinsic properties of the electrovac metric, while the magnetic field is represented correctly by the t component of the dual electromagnetic four-potential.

Domain Generalization (DG) aims to learn representations that remain robust under out-of-distribution (OOD) shifts and generalize effectively to unseen target domains. While recent invariant learning strategies and architectural advances have achieved strong performance, explicitly discovering a structured domain-invariant subspace through second-order statistics remains underexplored. In this work, we propose CPCANet, a novel framework grounded in Common Principal Component Analysis (CPCA), which unrolls the iterative Flury-Gautschi (FG) algorithm into fully differentiable neural layers. This approach integrates the statistical properties of CPCA into an end-to-end trainable framework, enforcing the discovery of a shared subspace across diverse domains while preserving interpretability. Experiments on four standard DG benchmarks demonstrate that CPCANet achieves state-of-the-art (SOTA) performance in zero-shot transfer. Moreover, CPCANet is architecture-agnostic and requires no dataset-specific tuning, providing a simple and efficient approach to learning robust representations under distribution shift. Code is available at https://github.com/wish44165/CPCANet.

Medical vision-language pretraining increasingly relies on medical reports as large-scale supervisory signals; however, raw reports often exhibit substantial stylistic heterogeneity, variable length, and a considerable amount of image-irrelevant content. Although text normalization is frequently adopted as a preprocessing step in prior work, its design principles and empirical impact on vision-language pretraining remain insufficiently and systematically examined. In this study, we present MedTri, a deployable normalization framework for medical vision-language pretraining that converts free-text reports into a unified [Anatomical Entity: Radiologic Description + Diagnosis Category] triplet. This structured, anatomy-grounded normalization preserves essential morphological and spatial information while removing stylistic noise and image-irrelevant content, providing consistent and image-grounded textual supervision at scale. Across multiple datasets spanning both X-ray and computed tomography (CT) modalities, we demonstrate that structured, anatomy-grounded text normalization is an important factor in medical vision-language pretraining quality, yielding consistent improvements over raw reports and existing normalization baselines. In addition, we illustrate how this normalization can easily support modular text-level augmentation strategies, including knowledge enrichment and anatomy-grounded counterfactual supervision, which provide complementary gains in robustness and generalization without altering the core normalization process. Together, our results position structured text normalization as a critical and generalizable preprocessing component for medical vision-language learning, while MedTri provides this normalization platform. Code and data will be released at https://github.com/Arturia-Pendragon-Iris/MedTri.

Large language models (LLMs) exhibit strong capabilities as decision-making agents by interleaving reasoning and actions, as seen in ReAct-style frameworks. Yet, their practical deployment is constrained by high inference costs and large model sizes. We propose Structured Agent Distillation, a framework that compresses large LLM-based agents into smaller student models while preserving both reasoning fidelity and action consistency. Unlike standard token-level distillation, our method segments trajectories into {[REASON]} and {[ACT]} spans, applying segment-specific losses to align each component with the teacher's behavior. This structure-aware supervision enables compact agents to better replicate the teacher's decision process. Experiments on ALFWorld, HotPotQA-ReAct, and WebShop show that our approach consistently outperforms token-level and imitation learning baselines, achieving significant compression with minimal performance drop. Scaling and ablation results further highlight the importance of span-level alignment for efficient and deployable agents.

Recent conversational memory systems invest heavily in LLM-based structuring at ingestion time and learned retrieval policies at query time. We show that neither is necessary. SmartSearch retrieves from raw, unstructured conversation history using a fully deterministic pipeline: NER-weighted substring matching for recall, rule-based entity discovery for multi-hop expansion, and a CrossEncoder+ColBERT rank fusion stage -- the only learned component -- running on CPU in ~650ms. Oracle analysis on two benchmarks identifies a compilation bottleneck: retrieval recall reaches 98.6%, but without intelligent ranking only 22.5% of gold evidence survives truncation to the token budget. With score-adaptive truncation and no per-dataset tuning, SmartSearch achieves 93.5% on LoCoMo and 88.4% on LongMemEval-S, exceeding all known memory systems under the same evaluation protocol on both benchmarks while using 8.5x fewer tokens than full-context baselines.

Aspect-based sentiment analysis has gained significant attention in recent years due to its ability to provide fine-grained insights for sentiment expressions related to specific features of entities. An important component of aspect-based sentiment analysis is aspect extraction, which involves identifying and extracting aspect terms from text. Effective aspect extraction serves as the foundation for accurate sentiment analysis at the aspect level. In this paper, we propose aspect extraction models that use different types of embeddings for words and part-of-speech tags and that combine several learning models. We also propose tree positional encoding that is based on dependency parsing output to capture better the aspect positions in sentences. In addition, a new aspect extraction dataset is built for Turkish by machine translating an English dataset in a controlled setting. The experiments conducted on two Turkish datasets showed that the proposed models mostly outperform the studies that use the same datasets, and incorporating tree positional encoding increases the performance of the models.

Structure-from-motion (SfM) is a long-standing problem in the computer vision community, which aims to reconstruct the camera poses and 3D structure of a scene from a set of unconstrained 2D images. Classical frameworks solve this problem in an incremental manner by detecting and matching keypoints, registering images, triangulating 3D points, and conducting bundle adjustment. Recent research efforts have predominantly revolved around harnessing the power of deep learning techniques to enhance specific elements (e.g., keypoint matching), but are still based on the original, non-differentiable pipeline. Instead, we propose a new deep pipeline VGGSfM, where each component is fully differentiable and thus can be trained in an end-to-end manner. To this end, we introduce new mechanisms and simplifications. First, we build on recent advances in deep 2D point tracking to extract reliable pixel-accurate tracks, which eliminates the need for chaining pairwise matches. Furthermore, we recover all cameras simultaneously based on the image and track features instead of gradually registering cameras. Finally, we optimise the cameras and triangulate 3D points via a differentiable bundle adjustment layer. We attain state-of-the-art performance on three popular datasets, CO3D, IMC Phototourism, and ETH3D.

The reflection superposition phenomenon is complex and widely distributed in the real world, which derives various simplified linear and nonlinear formulations of the problem. In this paper, based on the investigation of the weaknesses of existing models, we propose a more general form of the superposition model by introducing a learnable residue term, which can effectively capture residual information during decomposition, guiding the separated layers to be complete. In order to fully capitalize on its advantages, we further design the network structure elaborately, including a novel dual-stream interaction mechanism and a powerful decomposition network with a semantic pyramid encoder. Extensive experiments and ablation studies are conducted to verify our superiority over state-of-the-art approaches on multiple real-world benchmark datasets. Our code is publicly available at https://github.com/mingcv/DSRNet.

This paper investigates the automated recognition of structural bridge components using video data. Although understanding video data for structural inspections is straightforward for human inspectors, the implementation of the same task using machine learning methods has not been fully realized. In particular, single-frame image processing techniques, such as convolutional neural networks (CNNs), are not expected to identify structural components accurately when the image is a close-up view, lacking contextual information regarding where on the structure the image originates. Inspired by the significant progress in video processing techniques, this study investigates automated bridge component recognition using video data, where the information from the past frames is used to augment the understanding of the current frame. A new simulated video dataset is created to train the machine learning algorithms. Then, convolutional Neural Networks (CNNs) with recurrent architectures are designed and applied to implement the automated bridge component recognition task. Results are presented for simulated video data, as well as video collected in the field.

I study whether emotionally framed evaluation follow-ups change both the behavior and the calm-relative internal representations of small, locally deployed language models. Our main benchmark uses Qwen 3.5 0.8B on four impossible-constraint coding tasks and eight follow-up framings: calm, pressure, urgency, approval, shame, curiosity, encouragement, and threat. In the 0.8B eight-condition sweep (160 conversations), pressure produces the strongest shortcut markers (11/20 runs) and the clearest overfit pattern (3/20), while calm and curiosity preserve explicit honesty more often (7/20 and 6/20). For all seven non-baseline conditions, the corresponding calm-relative direction vectors peak at the final transformer layer. An exploratory PCA of the layer-23 direction vectors reveals a dominant first component (59.5% explained variance) aligned with a hand-labeled positive/negative split (cosine alignment 0.951); approval and urgency are nearly identical internally (cosine 0.957), whereas curiosity points away from urgency (-0.252). In a separate calm-vs.-pressure rerun used for scale comparison, Qwen 3.5 2B shows higher honest rates under calm framing and directionally consistent activation steering on a small 4-prompt A/B probe, whereas the 0.8B steering result reverses. I interpret these results as evidence for measurable prompt-sensitive control directions in small open models, while stopping short of claiming intrinsic emotional states.

We continue our program of investigation of the proper motions of spectrally separated structures in the Herbig-Haro outflows with the aid of Fabry-Perot scanning interferometry. This work mainly focuses on the physical nature of various structures in the jets. The aim of the present study is to measure the proper motions of the previously discovered kinematically separated structures in the working surface of the HH 83 collimated outflow. We used observations from two epochs separated by 15 years, which were performed on the 6m telescope with Fabry-Perot scanning interferometer. We obtained images corresponding to different radial velocities for the two separate epochs, and used them to measure proper motions. In the course of our data analysis, we discovered a counter bow-shock of HH 83 flow with positive radial velocity, which makes this flow a relatively symmetric bipolar system. The second epoch observations confirm that the working surface of the flow is split into two structures with an exceptionally large (250 km\ s^{-1}) difference in radial velocity. The proper motions of these structures are almost equal, which suggests that they are physically connected. The asymmetry of the bow shock and the turning of proper motion vectors suggests a collision between the outflow and a dense cloud. The profile of the Halpha line for the directly invisible infrared source HH 83 IRS, obtained by integration of the data within the reflection nebula, suggests it to be of P Cyg type with a broad absorption component characteristic of the FU Ori like objects. If this object underwent an FU Ori type outburst, which created the HH 83 working surfaces, its eruption took place about 1500 years ago according to the kinematical age of the outflow.

Despite recent advances in text-to-3D generation techniques, current methods often suffer from geometric inconsistencies, commonly referred to as the Janus Problem. This paper identifies the root cause of the Janus Problem: viewpoint generation bias in diffusion models, which creates a significant gap between the actual generated viewpoint and the expected one required for optimizing the 3D model. To address this issue, we propose a tuning-free approach called the Attention and CLIP Guidance (ACG) mechanism. ACG enhances desired viewpoints by adaptively controlling cross-attention maps, employs CLIP-based view-text similarities to filter out erroneous viewpoints, and uses a coarse-to-fine optimization strategy with staged prompts to progressively refine 3D generation. Extensive experiments demonstrate that our method significantly reduces the Janus Problem without compromising generation speed, establishing ACG as an efficient, plug-and-play component for existing text-to-3D frameworks.

This study investigates large language model (LLM) -based multi-agent systems (MASs) as a promising approach to inventory management, which is a key component of supply chain management. Although these systems have gained considerable attention for their potential to address the challenges associated with typical inventory management methods, key uncertainties regarding their effectiveness persist. Specifically, it is unclear whether LLM-based MASs can consistently derive optimal ordering policies and adapt to diverse supply chain scenarios. To address these questions, we examine an LLM-based MAS with a fixed-ordering strategy prompt that encodes the stepwise processes of the problem setting and a safe-stock strategy commonly used in inventory management. Our empirical results demonstrate that, even without detailed prompt adjustments, an LLM-based MAS can determine optimal ordering decisions in a restricted scenario. To enhance adaptability, we propose a novel agent called AIM-RM, which leverages similar historical experiences through similarity matching. Our results show that AIM-RM outperforms benchmark methods across various supply chain scenarios, highlighting its robustness and adaptability.

Advancements in high-computing devices increase the necessity for improved and new understanding and development of smart manufacturing factories. Discrete-event models with simulators have been shown to be critical to architect, designing, building, and operating the manufacturing of semiconductor chips. The diffusion, implantation, and lithography machines have intricate processes due to their feedforward and feedback connectivity. The dataset collected from simulations of the factory models holds the promise of generating valuable machine-learning models. As surrogate data-based models, their executions are highly efficient compared to the physics-based counterpart models. For the development of surrogate models, it is beneficial to have publicly available benchmark simulation models that are grounded in factory models that have concise structures and accurate behaviors. Hence, in this research, a dataset is devised and constructed based on a benchmark model of an Intel semiconductor fabrication factory. The model is formalized using the Parallel Discrete-Event System Specification and executed using the DEVS-Suite simulator. The time series dataset is constructed using discrete-event time trajectories. This dataset is further analyzed and used to develop baseline univariate and multivariate machine learning models. The dataset can also be utilized in the machine learning community for behavioral analysis based on formalized and scalable component-based discrete-event models and simulations.

Large Language Models (LLMs) require sophisticated prompting, yet current practices face challenges in structure, data integration, format sensitivity, and tooling. Existing methods lack comprehensive solutions for organizing complex prompts involving diverse data types (documents, tables, images) or managing presentation variations systematically. To address these gaps, we introduce POML (Prompt Orchestration Markup Language). POML employs component-based markup for logical structure (roles, tasks, examples), specialized tags for seamless data integration, and a CSS-like styling system to decouple content from presentation, reducing formatting sensitivity. It includes templating for dynamic prompts and a comprehensive developer toolkit (IDE support, SDKs) to improve version control and collaboration. We validate POML through two case studies demonstrating its impact on complex application integration (PomLink) and accuracy performance (TableQA), as well as a user study assessing its effectiveness in real-world development scenarios.

Physics-informed surrogate models can accelerate computational fluid dynamics simulations. However, many existing methods reproduce global flow patterns more reliably than localized multiscale structures. This study presents a physics-informed Fourier-wavelet transformer for next-step velocity-field reconstruction in real-world flow benchmarks. The proposed formulation combines hybrid Fourier-wavelet spectral encoding with physics-biased self-attention based on partial differential equation residual diagnostics. It also uses self-supervised pretraining through Masked Physics Prediction and Equation Consistency Prediction. The experiments are conducted on two real benchmark cases: cylinder-wake flow and fluid-structure interaction. All approaches are evaluated under a shared local protocol and compared with spectral, transformer-based, operator-learning, and physics-informed neural-network baselines. On the cylinder-wake benchmark, the proposed model achieves the best aggregate accuracy, with an all-channel normalized mean-squared error of 0.05875 and an all-channel Pearson correlation coefficient of 0.97019. On the fluid-structure-interaction benchmark, it gives the lowest all-channel normalized mean-squared error of 2.70 times 10^{-4}, compared with 4.02 times 10^{-4} for the strongest baseline. Component-wise field comparisons and scale-separated diagnostics further show stronger recovery of localized wake structures, including near-body, wake-core, and far-wake features. The results demonstrate improved real-world flow reconstruction while maintaining a practical accuracy-cost tradeoff.

Traffic light control is important for reducing congestion in urban mobility systems. This paper proposes a real-time traffic light control method using deep Q learning. Our approach incorporates a reward function considering queue lengths, delays, travel time, and throughput. The model dynamically decides phase changes based on current traffic conditions. The training of the deep Q network involves an offline stage from pre-generated data with fixed schedules and an online stage using real-time traffic data. A deep Q network structure with a "phase gate" component is used to simplify the model's learning task under different phases. A "memory palace" mechanism is used to address sample imbalance during the training process. We validate our approach using both synthetic and real-world traffic flow data on a road intersecting in Hangzhou, China. Results demonstrate significant performance improvements of the proposed method in reducing vehicle waiting time (57.1% to 100%), queue lengths (40.9% to 100%), and total travel time (16.8% to 68.0%) compared to traditional fixed signal plans.

Multi-component compounding is a prevalent phenomenon in Sanskrit, and understanding the implicit structure of a compound's components is crucial for deciphering its meaning. Earlier approaches in Sanskrit have focused on binary compounds and neglected the multi-component compound setting. This work introduces the novel task of nested compound type identification (NeCTI), which aims to identify nested spans of a multi-component compound and decode the implicit semantic relations between them. To the best of our knowledge, this is the first attempt in the field of lexical semantics to propose this task. We present 2 newly annotated datasets including an out-of-domain dataset for this task. We also benchmark these datasets by exploring the efficacy of the standard problem formulations such as nested named entity recognition, constituency parsing and seq2seq, etc. We present a novel framework named DepNeCTI: Dependency-based Nested Compound Type Identifier that surpasses the performance of the best baseline with an average absolute improvement of 13.1 points F1-score in terms of Labeled Span Score (LSS) and a 5-fold enhancement in inference efficiency. In line with the previous findings in the binary Sanskrit compound identification task, context provides benefits for the NeCTI task. The codebase and datasets are publicly available at: https://github.com/yaswanth-iitkgp/DepNeCTI

The ripple effect poses a significant challenge in knowledge editing for large language models. Namely, when a single fact is edited, the model struggles to accurately update the related facts in a sequence, which is evaluated by multi-hop questions linked to a chain of related facts. Recent strategies have moved away from traditional parameter updates to more flexible, less computation-intensive methods, proven to be more effective in addressing the ripple effect. In-context learning (ICL) editing uses a simple demonstration `Imagine that + new fact` to guide LLMs, but struggles with complex multi-hop questions as the new fact alone fails to specify the chain of facts involved in such scenarios. Besides, memory-based editing maintains additional storage for all edits and related facts, requiring continuous updates to stay effective. As a result of these design limitations, the challenge remains, with the highest accuracy being only 33.8% on the MQuAKE-cf benchmarks for Vicuna-7B. To address this, we propose RippleCOT, a novel ICL editing approach integrating Chain-of-Thought (COT) reasoning. RippleCOT structures demonstrations as `newfact, question, thought, answer`, incorporating a thought component to identify and decompose the multi-hop logic within questions. This approach effectively guides the model through complex multi-hop questions with chains of related facts. Comprehensive experiments demonstrate that RippleCOT significantly outperforms the state-of-the-art on the ripple effect, achieving accuracy gains ranging from 7.8% to 87.1%.

Transformer-based language models excel at both recall (retrieving memorized facts) and reasoning (performing multi-step inference), but whether these abilities rely on distinct internal mechanisms remains unclear. Distinguishing recall from reasoning is crucial for predicting model generalization, designing targeted evaluations, and building safer interventions that affect one ability without disrupting the other.We approach this question through mechanistic interpretability, using controlled datasets of synthetic linguistic puzzles to probe transformer models at the layer, head, and neuron level. Our pipeline combines activation patching and structured ablations to causally measure component contributions to each task type. Across two model families (Qwen and LLaMA), we find that interventions on distinct layers and attention heads lead to selective impairments: disabling identified "recall circuits" reduces fact-retrieval accuracy by up to 15\% while leaving reasoning intact, whereas disabling "reasoning circuits" reduces multi-step inference by a comparable margin. At the neuron level, we observe task-specific firing patterns, though these effects are less robust, consistent with neuronal polysemanticity.Our results provide the first causal evidence that recall and reasoning rely on separable but interacting circuits in transformer models. These findings advance mechanistic interpretability by linking circuit-level structure to functional specialization and demonstrate how controlled datasets and causal interventions can yield mechanistic insights into model cognition, informing safer deployment of large language models.

Merging multi-exposure images is a common approach for obtaining high dynamic range (HDR) images, with the primary challenge being the avoidance of ghosting artifacts in dynamic scenes. Recent methods have proposed using deep neural networks for deghosting. However, the methods typically rely on sufficient data with HDR ground-truths, which are difficult and costly to collect. In this work, to eliminate the need for labeled data, we propose SelfHDR, a self-supervised HDR reconstruction method that only requires dynamic multi-exposure images during training. Specifically, SelfHDR learns a reconstruction network under the supervision of two complementary components, which can be constructed from multi-exposure images and focus on HDR color as well as structure, respectively. The color component is estimated from aligned multi-exposure images, while the structure one is generated through a structure-focused network that is supervised by the color component and an input reference (\eg, medium-exposure) image. During testing, the learned reconstruction network is directly deployed to predict an HDR image. Experiments on real-world images demonstrate our SelfHDR achieves superior results against the state-of-the-art self-supervised methods, and comparable performance to supervised ones. Codes are available at https://github.com/cszhilu1998/SelfHDR

Modern Vision-Language-Action (VLA) models must bridge pretrained vision-language reasoning and precise continuous robot control. Existing action tokenizers discretize actions primarily for reconstruction, producing codes that preserve motion geometry but provide only weak semantic supervision to the backbone. We therefore formulate action tokenization not as mere compression, but as semantic interface learning between multimodal reasoning and executable control. To this end, we introduce X-Tokenizer, a lightweight encoder-Semantic Residual Quantization (SRQ)-decoder architecture that provides a shared action interface across diverse robotic arm embodiments. Its key component, SRQ, imposes an asymmetric structure on residual vector quantization: the first level is trained with Masked Action Modeling (MAM) to form a discrete action language that captures coarse motion intent, while deeper levels remain reconstruction-oriented residuals that preserve fine-grained details. To further align action tokens with multimodal semantics, X-Tokenizer is pretrained with contrastive alignment to the representation space of a pretrained foundation model and with next-frame vision-language feature prediction. Pretrained on 2.4M trajectories (2.0B action frames), a single frozen X-Tokenizer plugs into a mixed discrete-continuous VLA as a representation-shaping supervision signal. X-Tokenizer achieves top real-world aggregate and strong RoboTwin 2.0 simulation results. Outperforming FAST in multimodal grounding (+13.5%) and long-horizon tasks (+8.25), it shows that action tokenizers serve as semantic interfaces for VLA pretraining beyond mere action compression.

In recent years, Wi-Fi sensing has garnered significant attention due to its numerous benefits, such as privacy protection, low cost, and penetration ability. Extensive research has been conducted in this field, focusing on areas such as gesture recognition, people identification, and fall detection. However, many data-driven methods encounter challenges related to domain shift, where the model fails to perform well in environments different from the training data. One major factor contributing to this issue is the limited availability of Wi-Fi sensing datasets, which makes models learn excessive irrelevant information and over-fit to the training set. Unfortunately, collecting large-scale Wi-Fi sensing datasets across diverse scenarios is a challenging task. To address this problem, we propose CrossFi, a siamese network-based approach that excels in both in-domain scenario and cross-domain scenario, including few-shot, zero-shot scenarios, and even works in few-shot new-class scenario where testing set contains new categories. The core component of CrossFi is a sample-similarity calculation network called CSi-Net, which improves the structure of the siamese network by using an attention mechanism to capture similarity information, instead of simply calculating the distance or cosine similarity. Based on it, we develop an extra Weight-Net that can generate a template for each class, so that our CrossFi can work in different scenarios. Experimental results demonstrate that our CrossFi achieves state-of-the-art performance across various scenarios. In gesture recognition task, our CrossFi achieves an accuracy of 98.17% in in-domain scenario, 91.72% in one-shot cross-domain scenario, 64.81% in zero-shot cross-domain scenario, and 84.75% in one-shot new-class scenario. The code for our model is publicly available at https://github.com/RS2002/CrossFi.

The algebraic diversity framework generalizes temporal averaging over multiple observations to algebraic group action on a single observation for second-order statistical estimation. The central open problem in this framework is group selection: given an M-dimensional observation with unknown covariance structure, find the finite group whose spectral decomposition best matches the covariance. Naive enumeration of all subgroups of the symmetric group S_M requires exponential time in M. We prove that this combinatorial problem reduces to a generalized eigenvalue problem derived from the double commutator of the covariance matrix, yielding a polynomial-time algorithm with complexity O(d^2M^2 + d^3), where d is the dimension of a generator basis. The minimum eigenvector of the double-commutator matrix directly constructs the optimal group generator in closed form, with no iterative optimization. The reduction is exact: the double-commutator minimum eigenvalue is zero if and only if the optimal generator lies in the span of the basis, and its magnitude provides a certifiable optimality gap when it does not. This problem does not appear in the standard catalogs of computational complexity (Garey and Johnson, 1979) and represents a new class linking group theory, matrix analysis, and statistical estimation. We establish connections to independent component analysis (JADE), structured matrix nearness problems, and simultaneous matrix diagonalization, and we show that the double-commutator formulation is the unique approach that is simultaneously polynomial-time, closed-form, and certifiable. We extend the framework to non-Abelian symmetry recovery via a Sequential GEVP with deflation, and add two identifiability theorems characterizing the commutant-lattice ambiguity and the dichotomy on whether Aut(R) recovers a generative subgroup or only a supergroup.

Named Entity Recognition (NER) is a critical component of Natural Language Processing (NLP) for extracting structured information from unstructured text. However, for low-resource languages like Catalan, the performance of NER systems often suffers due to the lack of high-quality annotated datasets. This paper introduces NERCat, a fine-tuned version of the GLiNER[1] model, designed to improve NER performance specifically for Catalan text. We used a dataset of manually annotated Catalan television transcriptions to train and fine-tune the model, focusing on domains such as politics, sports, and culture. The evaluation results show significant improvements in precision, recall, and F1-score, particularly for underrepresented named entity categories such as Law, Product, and Facility. This study demonstrates the effectiveness of domain-specific fine-tuning in low-resource languages and highlights the potential for enhancing Catalan NLP applications through manual annotation and high-quality datasets.

Person-generic audio-driven face generation is a challenging task in computer vision. Previous methods have achieved remarkable progress in audio-visual synchronization, but there is still a significant gap between current results and practical applications. The challenges are two-fold: 1) Preserving unique individual traits for achieving high-precision lip synchronization. 2) Generating high-quality facial renderings in real-time performance. In this paper, we propose a novel generalized audio-driven framework RealTalk, which consists of an audio-to-expression transformer and a high-fidelity expression-to-face renderer. In the first component, we consider both identity and intra-personal variation features related to speaking lip movements. By incorporating cross-modal attention on the enriched facial priors, we can effectively align lip movements with audio, thus attaining greater precision in expression prediction. In the second component, we design a lightweight facial identity alignment (FIA) module which includes a lip-shape control structure and a face texture reference structure. This novel design allows us to generate fine details in real-time, without depending on sophisticated and inefficient feature alignment modules. Our experimental results, both quantitative and qualitative, on public datasets demonstrate the clear advantages of our method in terms of lip-speech synchronization and generation quality. Furthermore, our method is efficient and requires fewer computational resources, making it well-suited to meet the needs of practical applications.

Local feature matching has long been a fundamental component of 3D vision systems such as Structure-from-Motion (SfM), yet progress has lagged behind the rapid advances of modern data-driven approaches. The newer approaches, such as feed-forward reconstruction models, have benefited extensively from scaling dataset sizes, whereas local feature matching models are still only trained on a few mid-sized datasets. In this paper, we revisit local feature matching from a data-driven perspective. In our approach, which we call LoMa, we combine large and diverse data mixtures, modern training recipes, scaled model capacity, and scaled compute, resulting in remarkable gains in performance. Since current standard benchmarks mainly rely on collecting sparse views from successful 3D reconstructions, the evaluation of progress in feature matching has been limited to relatively easy image pairs. To address the resulting saturation of benchmarks, we collect 1000 highly challenging image pairs from internet data into a new dataset called HardMatch. Ground truth correspondences for HardMatch are obtained via manual annotation by the authors. In our extensive benchmarking suite, we find that LoMa makes outstanding progress across the board, outperforming the state-of-the-art method ALIKED+LightGlue by +18.6 mAA on HardMatch, +29.5 mAA on WxBS, +21.4 (1m, 10^circ) on InLoc, +24.2 AUC on RUBIK, and +12.4 mAA on IMC 2022. We release our code and models publicly at https://github.com/davnords/LoMa.

This work presents a systematic investigation into modernizing Vision Transformer backbones by leveraging architectural advancements from the past five years. While preserving the canonical Attention-FFN structure, we conduct a component-wise refinement involving normalization, activation functions, positional encoding, gating mechanisms, and learnable tokens. These updates form a new generation of Vision Transformers, which we call ViT-5. Extensive experiments demonstrate that ViT-5 consistently outperforms state-of-the-art plain Vision Transformers across both understanding and generation benchmarks. On ImageNet-1k classification, ViT-5-Base reaches 84.2\% top-1 accuracy under comparable compute, exceeding DeiT-III-Base at 83.8\%. ViT-5 also serves as a stronger backbone for generative modeling: when plugged into an SiT diffusion framework, it achieves 1.84 FID versus 2.06 with a vanilla ViT backbone. Beyond headline metrics, ViT-5 exhibits improved representation learning and favorable spatial reasoning behavior, and transfers reliably across tasks. With a design aligned with contemporary foundation-model practices, ViT-5 offers a simple drop-in upgrade over vanilla ViT for mid-2020s vision backbones.

Continuous physical fields represent a large fraction of data under scientific investigation. Their multiscale structures are central to discovery, yet useful coordinates are not known in advance. Standard self-supervised methods define context and targets in fixed image coordinates, posing a predictive task misaligned with fields organized across a continuous scale hierarchy. We introduce ScaleAware-JEPA, a framework that constructs dense, label-free latent coordinates for continuous scalar fields. Constrained Diffusion Decomposition (CDD) separates each field into pixel-registered scale components and provides the scale coordinates that define the masking geometry. The resulting JEPA objective predicts hidden structure with a context footprint tied to the diffusion scale of each component rather than to an arbitrary patch size. Across MHD turbulence, interstellar molecular gas and urban nighttime-light structure, the learned geometry maps back to coherent morphology, forming dense structural atlases without labels or predefined segmentation rules. By tying latent prediction to the scale hierarchy of a field, ScaleAware-JEPA constructs latent coordinates through which complex physical patterns can be inspected before their relevant structures have been prescribed. Code is available at https://github.com/gxli/SA-JEPA.

Lensless imaging stands out as a promising alternative to conventional lens-based systems, particularly in scenarios demanding ultracompact form factors and cost-effective architectures. However, such systems are fundamentally governed by the Point Spread Function (PSF), which dictates how a point source contributes to the final captured signal. Traditional lensless techniques often require explicit calibrations and extensive pre-processing, relying on static or approximate PSF models. These rigid strategies can result in limited adaptability to real-world challenges, including noise, system imperfections, and dynamic scene variations, thus impeding high-fidelity reconstruction. In this paper, we propose LensNet, an end-to-end deep learning framework that integrates spatial-domain and frequency-domain representations in a unified pipeline. Central to our approach is a learnable Coded Mask Simulator (CMS) that enables dynamic, data-driven estimation of the PSF during training, effectively mitigating the shortcomings of fixed or sparsely calibrated kernels. By embedding a Wiener filtering component, LensNet refines global structure and restores fine-scale details, thus alleviating the dependency on multiple handcrafted pre-processing steps. Extensive experiments demonstrate LensNet's robust performance and superior reconstruction quality compared to state-of-the-art methods, particularly in preserving high-frequency details and attenuating noise. The proposed framework establishes a novel convergence between physics-based modeling and data-driven learning, paving the way for more accurate, flexible, and practical lensless imaging solutions for applications ranging from miniature sensors to medical diagnostics. The link of code is https://github.com/baijiesong/Lensnet.

The European Space Agency's Planck satellite, which was dedicated to studying the early Universe and its subsequent evolution, was launched on 14 May 2009. It scanned the microwave and submillimetre sky continuously between 12 August 2009 and 23 October 2013, producing deep, high-resolution, all-sky maps in nine frequency bands from 30 to 857GHz. This paper presents the cosmological legacy of Planck, which currently provides our strongest constraints on the parameters of the standard cosmological model and some of the tightest limits available on deviations from that model. The 6-parameter LCDM model continues to provide an excellent fit to the cosmic microwave background data at high and low redshift, describing the cosmological information in over a billion map pixels with just six parameters. With 18 peaks in the temperature and polarization angular power spectra constrained well, Planck measures five of the six parameters to better than 1% (simultaneously), with the best-determined parameter (theta_*) now known to 0.03%. We describe the multi-component sky as seen by Planck, the success of the LCDM model, and the connection to lower-redshift probes of structure formation. We also give a comprehensive summary of the major changes introduced in this 2018 release. The Planck data, alone and in combination with other probes, provide stringent constraints on our models of the early Universe and the large-scale structure within which all astrophysical objects form and evolve. We discuss some lessons learned from the Planck mission, and highlight areas ripe for further experimental advances.

Graph Neural Networks (GNNs) have advanced graph structure understanding via recursive information exchange and aggregation among graph nodes. To improve model robustness, self-supervised learning (SSL) has emerged as a promising approach for data augmentation. However, existing methods for generating pre-trained graph embeddings often rely on fine-tuning with specific downstream task labels, which limits their usability in scenarios where labeled data is scarce or unavailable. To address this, our research focuses on advancing the generalization capabilities of graph models in challenging zero-shot learning scenarios. Inspired by the success of large language models (LLMs), we aim to develop a graph-oriented LLM that can achieve high generalization across diverse downstream datasets and tasks, even without any information available from the downstream graph data. In this work, we present the GraphGPT framework that aligns LLMs with graph structural knowledge with a graph instruction tuning paradigm. Our framework incorporates a text-graph grounding component to establish a connection between textual information and graph structures. Additionally, we propose a dual-stage instruction tuning paradigm, accompanied by a lightweight graph-text alignment projector. This paradigm explores self-supervised graph structural signals and task-specific graph instructions, to guide LLMs in understanding complex graph structures and improving their adaptability across different downstream tasks. Our framework is evaluated on supervised and zero-shot graph learning tasks, demonstrating superior generalization and outperforming state-of-the-art baselines.

We present a new approach for understanding the periodicity structure and semantics of motion datasets, independently of the morphology and skeletal structure of characters. Unlike existing methods using an overly sparse high-dimensional latent, we propose a phase manifold consisting of multiple closed curves, each corresponding to a latent amplitude. With our proposed vector quantized periodic autoencoder, we learn a shared phase manifold for multiple characters, such as a human and a dog, without any supervision. This is achieved by exploiting the discrete structure and a shallow network as bottlenecks, such that semantically similar motions are clustered into the same curve of the manifold, and the motions within the same component are aligned temporally by the phase variable. In combination with an improved motion matching framework, we demonstrate the manifold's capability of timing and semantics alignment in several applications, including motion retrieval, transfer and stylization. Code and pre-trained models for this paper are available at https://peizhuoli.github.io/walkthedog.

Generating high-quality time series data has emerged as a critical research topic due to its broad utility in supporting downstream time series mining tasks. A major challenge lies in modeling the intrinsic stochasticity of temporal dynamics, as real-world sequences often exhibit random fluctuations and localized variations. While diffusion models have achieved remarkable success, their generation process is computationally inefficient, often requiring hundreds to thousands of expensive function evaluations per sample. Flow matching has emerged as a more efficient paradigm, yet its conventional ordinary differential equation (ODE)-based formulation fails to explicitly capture stochasticity, thereby limiting the fidelity of generated sequences. By contrast, stochastic differential equation (SDE) are naturally suited for modeling randomness and uncertainty. Motivated by these insights, we propose TimeFlow, a novel SDE-based flow matching framework that integrates a encoder-only architecture. Specifically, we design a component-wise decomposed velocity field to capture the multi-faceted structure of time series and augment the vanilla flow-matching optimization with an additional stochastic term to enhance representational expressiveness. TimeFlow is flexible and general, supporting both unconditional and conditional generation tasks within a unified framework. Extensive experiments across diverse datasets demonstrate that our model consistently outperforms strong baselines in generation quality, diversity, and efficiency.

Contemporary diffusion models show remarkable capability in text-to-image generation, while still being limited to restricted resolutions (e.g., 1,024 X 1,024). Recent advances enable tuning-free higher-resolution image generation by recycling pre-trained diffusion models and extending them via regional denoising or dilated sampling/convolutions. However, these models struggle to simultaneously preserve global semantic structure and produce creative regional details in higher-resolution images. To address this, we present C-Upscale, a new recipe of tuning-free image upscaling that pivots on global-regional priors derived from given global prompt and estimated regional prompts via Multimodal LLM. Technically, the low-frequency component of low-resolution image is recognized as global structure prior to encourage global semantic consistency in high-resolution generation. Next, we perform regional attention control to screen cross-attention between global prompt and each region during regional denoising, leading to regional attention prior that alleviates object repetition issue. The estimated regional prompts containing rich descriptive details further act as regional semantic prior to fuel the creativity of regional detail generation. Both quantitative and qualitative evaluations demonstrate that our C-Upscale manages to generate ultra-high-resolution images (e.g., 4,096 X 4,096 and 8,192 X 8,192) with higher visual fidelity and more creative regional details.

Point management is a critical component in optimizing 3D Gaussian Splatting (3DGS) models, as the point initiation (e.g., via structure from motion) is distributionally inappropriate. Typically, the Adaptive Density Control (ADC) algorithm is applied, leveraging view-averaged gradient magnitude thresholding for point densification, opacity thresholding for pruning, and regular all-points opacity reset. However, we reveal that this strategy is limited in tackling intricate/special image regions (e.g., transparent) as it is unable to identify all the 3D zones that require point densification, and lacking an appropriate mechanism to handle the ill-conditioned points with negative impacts (occlusion due to false high opacity). To address these limitations, we propose a Localized Point Management (LPM) strategy, capable of identifying those error-contributing zones in the highest demand for both point addition and geometry calibration. Zone identification is achieved by leveraging the underlying multiview geometry constraints, with the guidance of image rendering errors. We apply point densification in the identified zone, whilst resetting the opacity of those points residing in front of these regions so that a new opportunity is created to correct ill-conditioned points. Serving as a versatile plugin, LPM can be seamlessly integrated into existing 3D Gaussian Splatting models. Experimental evaluation across both static 3D and dynamic 4D scenes validate the efficacy of our LPM strategy in boosting a variety of existing 3DGS models both quantitatively and qualitatively. Notably, LPM improves both vanilla 3DGS and SpaceTimeGS to achieve state-of-the-art rendering quality while retaining real-time speeds, outperforming on challenging datasets such as Tanks & Temples and the Neural 3D Video Dataset.

The vastness of the design space created by the combination of a large number of computational mechanisms, including machine learning, is an obstacle to creating an artificial general intelligence (AGI). Brain-inspired AGI development, in other words, cutting down the design space to look more like a biological brain, which is an existing model of a general intelligence, is a promising plan for solving this problem. However, it is difficult for an individual to design a software program that corresponds to the entire brain because the neuroscientific data required to understand the architecture of the brain are extensive and complicated. The whole-brain architecture approach divides the brain-inspired AGI development process into the task of designing the brain reference architecture (BRA) -- the flow of information and the diagram of corresponding components -- and the task of developing each component using the BRA. This is called BRA-driven development. Another difficulty lies in the extraction of the operating principles necessary for reproducing the cognitive-behavioral function of the brain from neuroscience data. Therefore, this study proposes the Structure-constrained Interface Decomposition (SCID) method, which is a hypothesis-building method for creating a hypothetical component diagram consistent with neuroscientific findings. The application of this approach has begun for building various regions of the brain. Moving forward, we will examine methods of evaluating the biological plausibility of brain-inspired software. This evaluation will also be used to prioritize different computational mechanisms, which should be merged, associated with the same regions of the brain.

Transformer architectures have proven to learn useful representations for protein classification and generation tasks. However, these representations present challenges in interpretability. In this work, we demonstrate a set of methods for analyzing protein Transformer models through the lens of attention. We show that attention: (1) captures the folding structure of proteins, connecting amino acids that are far apart in the underlying sequence, but spatially close in the three-dimensional structure, (2) targets binding sites, a key functional component of proteins, and (3) focuses on progressively more complex biophysical properties with increasing layer depth. We find this behavior to be consistent across three Transformer architectures (BERT, ALBERT, XLNet) and two distinct protein datasets. We also present a three-dimensional visualization of the interaction between attention and protein structure. Code for visualization and analysis is available at https://github.com/salesforce/provis.

Tool-use capability is a fundamental component of LLM agents, enabling them to interact with external systems through structured function calls. However, existing research exhibits inconsistent interaction representations, largely overlooks the structural distribution of tool-use trajectories, and relies on incompatible evaluation benchmarks. We present UniToolCall, a unified framework for tool learning that standardizes the entire pipeline from toolset construction and dataset generation to evaluation. The framework curates a large tool pool of 22k+ tools and constructs a hybrid training corpus of 390k+ instances by combining 10 standardized public datasets with structurally controlled synthetic trajectories. It explicitly models diverse interaction patterns, including single-hop vs. multi-hop and single-turn vs. multi-turn, while capturing both serial and parallel execution structures. To support coherent multi-turn reasoning, we further introduce an Anchor Linkage mechanism that enforces cross-turn dependencies. Furthermore, we convert 7 public benchmarks into a unified Query--Action--Observation--Answer (QAOA) representation with fine-grained evaluation at the function-call, turn, and conversation levels. Experiments show that fine-tuning Qwen3-8B on our dataset substantially improves tool-use performance. Under the distractor-heavy Hybrid-20 setting, achieves 93.0% single-turn Strict Precision, outperforming commercial models including GPT, Gemini, and Claude.

In this work we propose a blackbox intervention method for visual dialog models, with the aim of assessing the contribution of individual linguistic or visual components. Concretely, we conduct structured or randomized interventions that aim to impair an individual component of the model, and observe changes in task performance. We reproduce a state-of-the-art visual dialog model and demonstrate that our methodology yields surprising insights, namely that both dialog and image information have minimal contributions to task performance. The intervention method presented here can be applied as a sanity check for the strength and robustness of each component in visual dialog systems.

Existing point cloud completion methods struggle to balance high-quality reconstruction with computational efficiency. To address this, we propose PPC-MT, a novel parallel framework for point cloud completion leveraging a hybrid Mamba-Transformer architecture. Our approach introduces an innovative parallel completion strategy guided by Principal Component Analysis (PCA), which imposes a geometrically meaningful structure on unordered point clouds, transforming them into ordered sets and decomposing them into multiple subsets. These subsets are reconstructed in parallel using a multi-head reconstructor. This structured parallel synthesis paradigm significantly enhances the uniformity of point distribution and detail fidelity, while preserving computational efficiency. By integrating Mamba's linear complexity for efficient feature extraction during encoding with the Transformer's capability to model fine-grained multi-sequence relationships during decoding, PPC-MT effectively balances efficiency and reconstruction accuracy. Extensive quantitative and qualitative experiments on benchmark datasets, including PCN, ShapeNet-55/34, and KITTI, demonstrate that PPC-MT outperforms state-of-the-art methods across multiple metrics, validating the efficacy of our proposed framework.

Recently, leveraging pre-trained Large Language Models (LLMs) for time series (TS) tasks has gained increasing attention, which involves activating and enhancing LLMs' capabilities. Many methods aim to activate LLMs' capabilities based on token-level alignment but overlook LLMs' inherent strength on natural language processing -- their deep understanding of linguistic logic and structure rather than superficial embedding processing. We propose Context-Alignment, a new paradigm that aligns TS with a linguistic component in the language environments familiar to LLMs to enable LLMs to contextualize and comprehend TS data, thereby activating their capabilities. Specifically, such context-level alignment comprises structural alignment and logical alignment, which is achieved by a Dual-Scale Context-Alignment GNNs (DSCA-GNNs) applied to TS-language multimodal inputs. Structural alignment utilizes dual-scale nodes to describe hierarchical structure in TS-language, enabling LLMs treat long TS data as a whole linguistic component while preserving intrinsic token features. Logical alignment uses directed edges to guide logical relationships, ensuring coherence in the contextual semantics. Demonstration examples prompt are employed to construct Demonstration Examples based Context-Alignment (DECA) following DSCA-GNNs framework. DECA can be flexibly and repeatedly integrated into various layers of pre-trained LLMs to improve awareness of logic and structure, thereby enhancing performance. Extensive experiments show the effectiveness of DECA and the importance of Context-Alignment across tasks, particularly in few-shot and zero-shot forecasting, confirming that Context-Alignment provide powerful prior knowledge on context.

Bayes' rule tells us how to invert a causal process in order to update our beliefs in light of new evidence. If the process is believed to have a complex compositional structure, we may ask whether composing the inversions of the component processes gives the same belief update as the inversion of the whole. We answer this question affirmatively, showing that the relevant compositional structure is precisely that of the lens pattern, and that we can think of Bayesian inversion as a particular instance of a state-dependent morphism in a corresponding fibred category. We define a general notion of (mixed) Bayesian lens, and discuss the (un)lawfulness of these lenses when their contravariant components are exact Bayesian inversions. We prove our main result both abstractly and concretely, for both discrete and continuous states, taking care to illustrate the common structures.

We introduce Zep, a novel memory layer service for AI agents that outperforms the current state-of-the-art system, MemGPT, in the Deep Memory Retrieval (DMR) benchmark. Additionally, Zep excels in more comprehensive and challenging evaluations than DMR that better reflect real-world enterprise use cases. While existing retrieval-augmented generation (RAG) frameworks for large language model (LLM)-based agents are limited to static document retrieval, enterprise applications demand dynamic knowledge integration from diverse sources including ongoing conversations and business data. Zep addresses this fundamental limitation through its core component Graphiti -- a temporally-aware knowledge graph engine that dynamically synthesizes both unstructured conversational data and structured business data while maintaining historical relationships. In the DMR benchmark, which the MemGPT team established as their primary evaluation metric, Zep demonstrates superior performance (94.8% vs 93.4%). Beyond DMR, Zep's capabilities are further validated through the more challenging LongMemEval benchmark, which better reflects enterprise use cases through complex temporal reasoning tasks. In this evaluation, Zep achieves substantial results with accuracy improvements of up to 18.5% while simultaneously reducing response latency by 90% compared to baseline implementations. These results are particularly pronounced in enterprise-critical tasks such as cross-session information synthesis and long-term context maintenance, demonstrating Zep's effectiveness for deployment in real-world applications.

With the rise of software-as-a-service and microservice architectures, RESTful APIs are now ubiquitous in mobile and web applications. A service can have tens or hundreds of API methods, making it a challenge for programmers to find the right combination of methods to solve their task. We present APIphany, a component-based synthesizer for programs that compose calls to RESTful APIs. The main innovation behind APIphany is the use of precise semantic types, both to specify user intent and to direct the search. APIphany contributes three novel mechanisms to overcome challenges in adapting component-based synthesis to the REST domain: (1) a type inference algorithm for augmenting REST specifications with semantic types; (2) an efficient synthesis technique for "wrangling" semi-structured data, which is commonly required in working with RESTful APIs; and (3) a new form of simulated execution to avoid executing APIs calls during synthesis. We evaluate APIphany on three real-world APIs and 32 tasks extracted from GitHub repositories and StackOverflow. In our experiments, APIphany found correct solutions to 29 tasks, with 23 of them reported among top ten synthesis results.

Competitive debate is a complex task of computational argumentation. Large Language Models (LLMs) suffer from hallucinations and lack competitiveness in this field. To address these challenges, we introduce Agent for Debate (Agent4Debate), a dynamic multi-agent framework based on LLMs designed to enhance their capabilities in competitive debate. Drawing inspiration from human behavior in debate preparation and execution, Agent4Debate employs a collaborative architecture where four specialized agents, involving Searcher, Analyzer, Writer, and Reviewer, dynamically interact and cooperate. These agents work throughout the debate process, covering multiple stages from initial research and argument formulation to rebuttal and summary. To comprehensively evaluate framework performance, we construct the Competitive Debate Arena, comprising 66 carefully selected Chinese debate motions. We recruit ten experienced human debaters and collect records of 200 debates involving Agent4Debate, baseline models, and humans. The evaluation employs the Debatrix automatic scoring system and professional human reviewers based on the established Debatrix-Elo and Human-Elo ranking. Experimental results indicate that the state-of-the-art Agent4Debate exhibits capabilities comparable to those of humans. Furthermore, ablation studies demonstrate the effectiveness of each component in the agent structure.

Kamon (family crests) are an important part of Japanese culture and a natural test case for compositional visual recognition: each crest combines a small number of symbolic choices, but the space of possible descriptions is sparse. We introduce KamonBench, a grammar-based image-to-structure benchmark with 20,000 synthetic composite crests and auxiliary component examples. Each composite crest is paired with a formal kamon description language - "kamon yōgo" - description, a segmented Japanese analysis, an English translation, and a non-linguistic program code. Because each synthetic crest is generated from known factors, namely container, modifier, and motif, KamonBench supports evaluation beyond caption-level accuracy: direct program-code factor metrics, controlled factor-pair recombination splits, counterfactual motif-sensitivity groups under fixed container-modifier contexts, and linear probes of factor accessibility. We include baseline results for a ViT encoder/Transformer decoder and two VGG n-gram decoders, with and without learned positional masks. KamonBench therefore provides a controlled testbed for sparse compositional visual recognition and factor recovery in vision-language models.

Multimodal models for text-to-image generation have achieved strong visual fidelity, yet they remain brittle under compositional structural constraints-notably generative numeracy, attribute binding, and part-level relations. To address these challenges, we propose Shape-of-Thought (SoT), a visual CoT framework that enables progressive shape assembly via coherent 2D projections without external engines at inference time. SoT trains a unified multimodal autoregressive model to generate interleaved textual plans and rendered intermediate states, helping the model capture shape-assembly logic without producing explicit geometric representations. To support this paradigm, we introduce SoT-26K, a large-scale dataset of grounded assembly traces derived from part-based CAD hierarchies, and T2S-CompBench, a benchmark for evaluating structural integrity and trace faithfulness. Fine-tuning on SoT-26K achieves 88.4% on component numeracy and 84.8% on structural topology, outperforming text-only baselines by around 20%. SoT establishes a new paradigm for transparent, process-supervised compositional generation. The code is available at https://anonymous.4open.science/r/16FE/. The SoT-26K dataset will be released upon acceptance.

Motivation The genotype assignment problem consists of predicting, from the genotype of an individual, which of a known set of populations it originated from. The problem arises in a variety of contexts, including wildlife forensics, invasive species detection and biodiversity monitoring. Existing approaches perform well under ideal conditions but are sensitive to a variety of common violations of the assumptions they rely on. Results In this article, we introduce Mycorrhiza, a machine learning approach for the genotype assignment problem. Our algorithm makes use of phylogenetic networks to engineer features that encode the evolutionary relationships among samples. Those features are then used as input to a Random Forests classifier. The classification accuracy was assessed on multiple published empirical SNP, microsatellite or consensus sequence datasets with wide ranges of size, geographical distribution and population structure and on simulated datasets. It compared favorably against widely used assessment tests or mixture analysis methods such as STRUCTURE and Admixture, and against another machine-learning based approach using principal component analysis for dimensionality reduction. Mycorrhiza yields particularly significant gains on datasets with a large average fixation index (FST) or deviation from the Hardy-Weinberg equilibrium. Moreover, the phylogenetic network approach estimates mixture proportions with good accuracy.

Unlike human-engineered systems such as aeroplanes, where each component's role and dependencies are well understood, the inner workings of AI models remain largely opaque, hindering verifiability and undermining trust. This paper introduces SemanticLens, a universal explanation method for neural networks that maps hidden knowledge encoded by components (e.g., individual neurons) into the semantically structured, multimodal space of a foundation model such as CLIP. In this space, unique operations become possible, including (i) textual search to identify neurons encoding specific concepts, (ii) systematic analysis and comparison of model representations, (iii) automated labelling of neurons and explanation of their functional roles, and (iv) audits to validate decision-making against requirements. Fully scalable and operating without human input, SemanticLens is shown to be effective for debugging and validation, summarizing model knowledge, aligning reasoning with expectations (e.g., adherence to the ABCDE-rule in melanoma classification), and detecting components tied to spurious correlations and their associated training data. By enabling component-level understanding and validation, the proposed approach helps bridge the "trust gap" between AI models and traditional engineered systems. We provide code for SemanticLens on https://github.com/jim-berend/semanticlens and a demo on https://semanticlens.hhi-research-insights.eu.

Protein function prediction is a crucial task in bioinformatics, with significant implications for understanding biological processes and disease mechanisms. While the relationship between sequence and function has been extensively explored, translating protein structure to function continues to present substantial challenges. Various models, particularly, CNN and graph-based deep learning approaches that integrate structural and functional data, have been proposed to address these challenges. However, these methods often fall short in elucidating the functional significance of key residues essential for protein functionality, as they predominantly adopt a retrospective perspective, leading to suboptimal performance. Inspired by region proposal networks in computer vision, we introduce the Protein Region Proposal Network (ProteinRPN) for accurate protein function prediction. Specifically, the region proposal module component of ProteinRPN identifies potential functional regions (anchors) which are refined through the hierarchy-aware node drop pooling layer favoring nodes with defined secondary structures and spatial proximity. The representations of the predicted functional nodes are enriched using attention mechanisms and subsequently fed into a Graph Multiset Transformer, which is trained with supervised contrastive (SupCon) and InfoNCE losses on perturbed protein structures. Our model demonstrates significant improvements in predicting Gene Ontology (GO) terms, effectively localizing functional residues within protein structures. The proposed framework provides a robust, scalable solution for protein function annotation, advancing the understanding of protein structure-function relationships in computational biology.

The last decade has witnessed a boom of deep learning research and applications achieving state-of-the-art results in various domains. However, most advances have been established empirically, and their theoretical analysis remains lacking. One major issue is that our current interpretation of neural networks (NNs) as function approximators is too generic to support in-depth analysis. In this paper, we remedy this by proposing an alternative interpretation that identifies NNs as chain graphs (CGs) and feed-forward as an approximate inference procedure. The CG interpretation specifies the nature of each NN component within the rich theoretical framework of probabilistic graphical models, while at the same time remains general enough to cover real-world NNs with arbitrary depth, multi-branching and varied activations, as well as common structures including convolution / recurrent layers, residual block and dropout. We demonstrate with concrete examples that the CG interpretation can provide novel theoretical support and insights for various NN techniques, as well as derive new deep learning approaches such as the concept of partially collapsed feed-forward inference. It is thus a promising framework that deepens our understanding of neural networks and provides a coherent theoretical formulation for future deep learning research.

We characterize the pre-softmax attention matrix QK^top in transformers as an associative memory matrix encoding pairwise associations between input features. By decomposing this matrix into its symmetric and skew-symmetric parts, we interpret the symmetric component as governing the structure of the energy landscape, and the skew-symmetric component as driving circulation on that landscape. Leveraging the energy formulation induced by the symmetric component, we derive Hopfield-style stability measures that quantify the stability of retrieved features. We observe meaningful correlations between Hopfield-style stability measures and the fidelity-diversity trade-offs in generation. Finally, we propose a controllable knob to modulate this trade-off by modifying the circulation of the underlying dynamics. Code is available at our GitHub (https://github.com/hyeon-cho/Attention-Symmetric-Decomposition).

Continual learning (CL) is a setting in which an agent has to learn from an incoming stream of data during its entire lifetime. Although major advances have been made in the field, one recurring problem which remains unsolved is that of Catastrophic Forgetting (CF). While the issue has been extensively studied empirically, little attention has been paid from a theoretical angle. In this paper, we show that the impact of CF increases as two tasks increasingly align. We introduce a measure of task similarity called the NTK overlap matrix which is at the core of CF. We analyze common projected gradient algorithms and demonstrate how they mitigate forgetting. Then, we propose a variant of Orthogonal Gradient Descent (OGD) which leverages structure of the data through Principal Component Analysis (PCA). Experiments support our theoretical findings and show how our method can help reduce CF on classical CL datasets.

Prompts are the interface for eliciting the capabilities of large language models (LLMs). Understanding their structure and components is critical for analyzing LLM behavior and optimizing performance. However, the field lacks a comprehensive framework for systematic prompt analysis and understanding. We introduce PromptPrism, a linguistically-inspired taxonomy that enables prompt analysis across three hierarchical levels: functional structure, semantic component, and syntactic pattern. We show the practical utility of PromptPrism by applying it to three applications: (1) a taxonomy-guided prompt refinement approach that automatically improves prompt quality and enhances model performance across a range of tasks; (2) a multi-dimensional dataset profiling method that extracts and aggregates structural, semantic, and syntactic characteristics from prompt datasets, enabling comprehensive analysis of prompt distributions and patterns; (3) a controlled experimental framework for prompt sensitivity analysis by quantifying the impact of semantic reordering and delimiter modifications on LLM performance. Our experimental results validate the effectiveness of our taxonomy across these applications, demonstrating that PromptPrism provides a foundation for refining, profiling, and analyzing prompts.

Practical cloud-edge deployment of Cross-Modal Re-identification (CM-ReID) faces challenges due to maintaining a fragmented ecosystem of specialized cloud models for diverse modalities. While Multi-Modal Large Language Models (MLLMs) offer strong unification potential, existing approaches fail to adapt them into a single end-to-end backbone and lack effective knowledge distillation strategies for edge deployment. To address these limitations, we propose MLLMEmbed-ReID, a unified framework based on a powerful cloud-edge architecture. First, we adapt a foundational MLLM into a state-of-the-art cloud model. We leverage instruction-based prompting to guide the MLLM in generating a unified embedding space across RGB, infrared, sketch, and text modalities. This model is then trained efficiently with a hierarchical Low-Rank Adaptation finetuning (LoRA-SFT) strategy, optimized under a holistic cross-modal alignment objective. Second, to deploy its knowledge onto an edge-native student, we introduce a novel distillation strategy motivated by the low-rank property in the teacher's feature space. To prioritize essential information, this method employs a Principal Component Mapping loss, while relational structures are preserved via a Feature Relation loss. Our lightweight edge-based model achieves state-of-the-art performance on multiple visual CM-ReID benchmarks, while its cloud-based counterpart excels across all CM-ReID benchmarks. The MLLMEmbed-ReID framework thus presents a complete and effective solution for deploying unified MLLM-level intelligence on resource-constrained devices. The code and models will be open-sourced soon.

Current LLM training positions mathematical reasoning as a core capability. With publicly available sources fully tapped, there is unmet demand for diverse and challenging math questions. Relying solely on human experts is both time-consuming and costly, while LLM-generated questions often lack the requisite diversity and difficulty. We present a design framework that combines the strengths of LLMs with a human-in-the-loop approach to generate a diverse array of challenging math questions. We leverage LLM metacognition skills [Didolkar et al., 2024] of a strong LLM to extract core "skills" from existing math datasets. These skills serve as the basis for generating novel and difficult questions by prompting the LLM with random pairs of core skills. The use of two different skills within each question makes finding such questions an "out of distribution" task for both LLMs and humans. Our pipeline employs LLMs to iteratively generate and refine questions and solutions through multiturn prompting. Human annotators then verify and further refine the questions, with their efficiency enhanced via further LLM interactions. Applying this pipeline on skills extracted from the MATH dataset [Hendrycks et al., 2021] resulted in MATH^2 - a dataset of higher-quality math questions, as evidenced by: (a) Lower performance of all models on MATH^2 than on MATH (b) Higher performance on MATH when using MATH^2 questions as in-context examples. Although focused on mathematics, our methodology seems applicable to other domains requiring structured reasoning, and potentially as a component of scalable oversight. Also of interest is a striking relationship observed between models' performance on the new dataset: the success rate on MATH^2 is the square on MATH, suggesting that successfully solving the question in MATH^2 requires a nontrivial combination of two distinct math skills.

Inspired by the emergent behaviors in large language models that generalized human intelligence, the research community is pursuing similar emergent capabilities within world models, with a emphasis on modeling the physical world. Within the scope of physical world model, objects are the fundamental primitives that constitute physical reality. From humans to computers, nearly everything we interact with is an object. These objects are rarely static; they are actionable entities with varying states determined by their intrinsic properties. While current methods approach object action states either via video generation or dynamic scene reconstruction, none explicitly model this basic element in a unified, principled way to build an actionable object representation. We propose WorldString, a neural architecture capable of modeling the state manifold of real-world objects by learning directly from point clouds or RGB-D video streams. Serving as a versatile digital twin, it acts as a foundational building block for physical world models; thus, we name it WorldString. Sweetly, its fully differentiable structure seamlessly enables future integration with policy learning and neural dynamics.

Deep learning weather models now match numerical weather prediction accuracy while running orders of magnitude faster, but produce deterministic forecasts without uncertainty estimates, a critical gap for high-stakes decisions during extreme weather events. This paper proposes Neural Tangent Kernel-based uncertainty quantification (NTK-UQ) using last-layer empirical features. Theoretical analysis predicts that UQ quality is architecture-dependent through two mechanisms. First, a variance collapse mechanism explains when UQ fails: when the eigenvalue truncation rank approaches the effective rank of the feature space, the GP correction term consumes nearly all prior variance, destroying discrimination between tropical cyclones and routine conditions; architectures with concentrated spectra (spectral operators) require aggressive truncation (k leq 10), while attention-based models tolerate full-rank computation. Second, decomposition performance depends on the non-Gaussian, heavy-tailed structure of extreme weather: Independent Component Analysis exploits higher-order statistics (kurtosis, negentropy) to isolate heavy-tailed extreme-event features, achieving higher discrimination than singular value decomposition, which captures only second-order variance. A data-driven selection rule chooses ICA or SVD from the feature eigenspectrum concentration ratio, correctly prescribing the superior decomposition for all four evaluated architectures. Compared to split conformal prediction (the natural post-hoc baseline), NTK-UQ achieves 31--37\% sharper prediction intervals at 90\% coverage, and uniquely produces adaptive intervals that scale with extreme event severity, which conformal prediction cannot achieve by construction. The framework requires no retraining; inference-time uncertainty requires only a single matrix-vector product per sample.

Contemporary machine learning paradigm excels in statistical data analysis, solving problems that classical AI couldn't. However, it faces key limitations, such as a lack of integration with planning, incomprehensible internal structure, and inability to learn continually. We present the initial design for an AI system, Agential AI (AAI), in principle operating independently or on top of statistical methods, designed to overcome these issues. AAI's core is a learning method that models temporal dynamics with guarantees of completeness, minimality, and continual learning, using component-level variation and selection to learn the structure of the environment. It integrates this with a behavior algorithm that plans on a learned model and encapsulates high-level behavior patterns. Preliminary experiments on a simple environment show AAI's effectiveness and potential.

Quantization to low bitwidth is a standard approach for deploying large language models, however, a few extreme weights and activations stretch the dynamic range and reduce the effective resolution of the quantizer. A common mitigation approach is to apply some fixed orthogonal transforms, such as Hadamard matrices, before quantization, which typically reduces the dynamic range. Yet, these transforms ignore the statistics of the data, and their optimality is currently not understood. In this work, we derive, for the first time, closed-form optimal linear blockwise transforms for joint weight-activation quantization using standard data-free quantizers for common numerical formats. Specifically, we provide derivations of the optimal adaptive (data-aware) transforms for round-to-nearest (RTN), AbsMax-scaled block quantizers for both integer and floating-point formats. The resulting construction, which we call WUSH, combines a Hadamard backbone with a data-dependent component based on second-order moments, yielding a non-orthogonal transform that is provably optimal under mild assumptions and remains structured for efficient implementation. Preliminary experimental results show that our approach consistently improves upon the Hadamard transform for common formats.

Database systems incorporate an ever-growing number of functions in their kernels (a.k.a., database native functions) for scenarios like new application support and business migration. This growth causes an urgent demand for automatic database native function synthesis. While recent advances in LLM-based code generation (e.g., Claude Code) show promise, they are too generic for database-specific development. They often hallucinate or overlook critical context because database function synthesis is inherently complex and error-prone, where synthesizing a single function may involve registering multiple function units, linking internal references, and implementing logic correctly. To this end, we propose DBCooker, an LLM-based system for automatically synthesizing database native functions. It consists of three components. First, the function characterization module aggregates multi-source declarations, identifies function units that require specialized coding, and traces cross-unit dependencies. Second, we design operations to address the main synthesis challenges: (1) a pseudo-code-based coding plan generator that constructs structured implementation skeletons by identifying key elements such as reusable referenced functions; (2) a hybrid fill-in-the-blank model guided by probabilistic priors and component awareness to integrate core logic with reusable routines; and (3) three-level progressive validation, including syntax checking, standards compliance, and LLM-guided semantic verification. Finally, an adaptive orchestration strategy unifies these operations with existing tools and dynamically sequences them via the orchestration history of similar functions. Results show that DBCooker outperforms other methods on SQLite, PostgreSQL, and DuckDB (34.55% higher accuracy on average), and can synthesize new functions absent in the latest SQLite (v3.50).

Generating accurate circuit schematics from high-level natural language descriptions remains a persistent challenge in electronics design, as large language models (LLMs) frequently hallucinate in granular details, violate electrical constraints, and produce non-machine-readable outputs. We present CircuitLM, a novel multi-agent LLM-aided circuit design pipeline that translates user prompts into structured, visually interpretable CircuitJSON schematics through five sequential stages: (i) LLM-based component identification, (ii) canonical pinout retrieval, (iii) chain-of-thought reasoning by an electronics expert agent, (iv) JSON schematic synthesis, and (v) force-directed SVG visualization. Anchored by a curated, embedding-powered component knowledge base. While LLMs often violate electrical constraints, CircuitLM bridges this gap by grounding generation in a verified and dynamically extensible component database, initially comprising 50 components. To ensure safety, we incorporate a hybrid evaluation framework, namely Dual-Metric Circuit Validation (DMCV), validated against human-expert assessments, which achieves high fidelity in microcontroller-centric designs. We evaluate the system on 100 diverse embedded-systems prompts across six LLMs and introduce DMCV to assess both structural and electrical validity. This work bridges natural language input to deployable hardware designs, enabling reliable circuit prototyping by non-experts. Our code and data will be made public upon acceptance.

Finding out the computational redundant part of a trained Deep Neural Network (DNN) is the key question that pruning algorithms target on. Many algorithms try to predict model performance of the pruned sub-nets by introducing various evaluation methods. But they are either inaccurate or very complicated for general application. In this work, we present a pruning method called EagleEye, in which a simple yet efficient evaluation component based on adaptive batch normalization is applied to unveil a strong correlation between different pruned DNN structures and their final settled accuracy. This strong correlation allows us to fast spot the pruned candidates with highest potential accuracy without actually fine-tuning them. This module is also general to plug-in and improve some existing pruning algorithms. EagleEye achieves better pruning performance than all of the studied pruning algorithms in our experiments. Concretely, to prune MobileNet V1 and ResNet-50, EagleEye outperforms all compared methods by up to 3.8%. Even in the more challenging experiments of pruning the compact model of MobileNet V1, EagleEye achieves the highest accuracy of 70.9% with an overall 50% operations (FLOPs) pruned. All accuracy results are Top-1 ImageNet classification accuracy. Source code and models are accessible to open-source community https://github.com/anonymous47823493/EagleEye .

We present Gazal-R1, a 32-billion-parameter language model that achieves state-of-the-art performance in medical reasoning while providing transparent, step-by-step explanations for clinical decision-making. Built upon Qwen3 32B, our model demonstrates that strategic training can enable mid-sized models to outperform significantly larger counterparts in specialized domains. We developed a novel two-stage training pipeline: first, supervised fine-tuning on a carefully curated dataset of 107,033 synthetic medical reasoning examples that teaches structured clinical thinking, enhanced by advanced parameter-efficient techniques including Weight-Decomposed Low-Rank Adaptation (DoRA) and Rank-Stabilized LoRA (rsLoRA); second, reinforcement learning using Group Relative Policy Optimization (GRPO) with a sophisticated multi-component reward system that refines accuracy, format adherence, and reasoning quality. Gazal-R1 achieves exceptional performance across medical benchmarks, scoring 87.1% on MedQA, 81.6% on MMLU Pro (Medical), and 79.6% on PubMedQA, surpassing models up to 12x larger. Beyond its strong empirical results, this work provides detailed insights into the challenges of training reasoning-capable models in specialized domains, including issues with reward hacking, training instability, and the fundamental tension between factual recall and detailed reasoning. Our methodology offers a reproducible framework for developing high-capability, domain-specific language models that balance performance, efficiency, and explainability.

Large language models (LLMs) are often augmented with tools to solve complex tasks. By generating code snippets and executing them through task-specific Application Programming Interfaces (APIs), they can offload certain functions to dedicated external modules, such as image encoding and performing calculations. However, most existing approaches to augment LLMs with tools are constrained by general-purpose APIs and lack the flexibility for tailoring them to specific tasks. In this work, we present CRAFT, a general tool creation and retrieval framework for LLMs. It creates toolsets specifically curated for the tasks and equips LLMs with a component that retrieves tools from these sets to enhance their capability to solve complex tasks. For each task, we collect specific code solutions by prompting GPT-4 to solve the training examples. Following a validation step ensuring the correctness, these solutions are abstracted into code snippets to enhance reusability, and deduplicated for higher quality. At inference time, the language model retrieves snippets from the toolsets and then executes them or generates the output conditioning on the retrieved snippets. Our method is designed to be flexible and offers a plug-and-play approach to adapt off-the-shelf LLMs to unseen domains and modalities, without any finetuning. Experiments on vision-language, tabular processing, and mathematical reasoning tasks show that our approach achieves substantial improvements compared to strong baselines. In addition, our in-depth analysis reveals that: (1) consistent performance improvement can be achieved by scaling up the number of tools and the capability of the backbone models; (2) each component of our approach contributes to the performance gains; (3) the created tools are well-structured and reliable with low complexity and atomicity. The code is available at https://github.com/lifan-yuan/CRAFT.

Retrieval-augmented language models often struggle with knowledge-intensive tasks due to inefficient retrieval, unstructured knowledge integration, and single-pass architectures. We present Retrieval-And-Structuring (RAS), a novel framework that dynamically constructs and reasons over query-specific knowledge graphs through iterative retrieval and structuring. RAS introduces four key technical innovations: (1) a themescoped retrieval mechanism that efficiently narrows the search space while maintaining retrieval quality, (2) an action planning module that determines knowledge needs and generates focused sub-queries, (3) a dynamic knowledge structuring approach that converts retrieved text into an evolving knowledge graph, and (4) a graph-augmented answering component that leverages the accumulated structured information. Our framework achieves state-of-the-art performance, surpassing leading baselines by 6.4% with open-source language models and 7.0% with proprietary models on seven knowledge-intensive generation datasets across all evaluation metrics. Detailed ablation studies verify the contribution of each technical component to the overall system performance.

Generating human videos with consistent motion from text prompts remains a significant challenge, particularly for whole-body or long-range motion. Existing video generation models prioritize appearance fidelity, resulting in unrealistic or physically implausible human movements with poor structural coherence. Additionally, most existing human video datasets primarily focus on facial or upper-body motions, or consist of vertically oriented dance videos, limiting the scope of corresponding generation methods to simple movements. To overcome these challenges, we propose MoCo, which decouples the process of human video generation into two components: structure generation and appearance generation. Specifically, our method first employs an efficient 3D structure generator to produce a human motion sequence from a text prompt. The remaining video appearance is then synthesized under the guidance of the generated structural sequence. To improve fine-grained control over sparse human structures, we introduce Human-Aware Dynamic Control modules and integrate dense tracking constraints during training. Furthermore, recognizing the limitations of existing datasets, we construct a large-scale whole-body human video dataset featuring complex and diverse motions. Extensive experiments demonstrate that MoCo outperforms existing approaches in generating realistic and structurally coherent human videos.

End-to-end ASR systems typically use fixed-depth acoustic encoders at inference, making it difficult to trade additional test-time computation for improved recognition without training a larger model. A natural approach is to reuse a shared Transformer block recurrently, but we find that naive looping does not fully exploit additional recurrent compute. We introduce LARM, a depth-conditioned looped Transformer that turns recurrent encoder depth into a controllable test-time compute axis. LARM combines sparse CTC checkpoints, supervision-clock embeddings, FiLM depth conditioning, and delayed soft-posterior feedback. These components structure the loop into recognition checkpoints separated by latent refinement phases and allow shared weights to specialize across recurrent steps. On LibriSpeech, LARM improves WER as the number of inference loops increases and achieves performance competitive with deeper unshared-parameter baselines. Our results show that test-time compute scaling can extend beyond autoregressive language-model reasoning to continuous non-autoregressive speech recognition.

Semantic caching cuts LLM inference costs by serving a cached response to semantically similar queries. Standard practice evaluates these systems using PR-AUC, a metric that only measures how well scores rank and ignores whether they are usable at a fixed threshold. We show this mismatch leads to systematically poor deployment choices, as models with the highest PR-AUC are often the worst in operation. We introduce Precision-Cache Hit Ratio (P-CHR) AUC, a cache-aware metric that measures precision across cache utilization levels, and Calibration Retention Rate (CRR), which captures how much offline ranking quality survives at deployment. We decompose the operational gap between offline and deployed quality into a recoverable calibration component and an irreducible structural component fixed by the dataset's positive rate. Our experiments show that the calibration gap is governed by the training objective rather than data scale, and post-hoc calibration only partially closes it. Ultimately, model selection for semantic caching is a calibration problem, not a ranking one, and measuring it is the first step to closing the gap.

The data landscape is rich with structured data, often of high value to organizations, driving important applications in data analysis and machine learning. Recent progress in representation learning and generative models for such data has led to the development of natural language interfaces to structured data, including those leveraging text-to-SQL. Contextualizing interactions, either through conversational interfaces or agentic components, in structured data through retrieval-augmented generation can provide substantial benefits in the form of freshness, accuracy, and comprehensiveness of answers. The key question is: how do we retrieve the right table(s) for the analytical query or task at hand? To this end, we introduce TARGET: a benchmark for evaluating TAble Retrieval for GEnerative Tasks. With TARGET we analyze the retrieval performance of different retrievers in isolation, as well as their impact on downstream tasks. We find that dense embedding-based retrievers far outperform a BM25 baseline which is less effective than it is for retrieval over unstructured text. We also surface the sensitivity of retrievers across various metadata (e.g., missing table titles), and demonstrate a stark variation of retrieval performance across datasets and tasks. TARGET is available at https://target-benchmark.github.io.

Understanding mobile user interfaces is important for building intelligent systems such as automation tools, accessibility solutions, and UI-aware agents. However, progress in this area is still limited by the lack of high-quality datasets that reflect real-world mobile applications and include reliable annotations. In this work, we introduce MUIAnno, a publicly available expert-annotated dataset for mobile UI understanding, collected from a diverse set of applications across multiple categories available on the iTunes platform. Each app was manually explored to capture representative UI screens, resulting in a collection that reflects a wide range of layouts and design patterns found in practice. To ensure annotation quality, we developed a custom web-based tool that allows UI/UX experts to label interface elements through a simple drag-and-drop process and generate structured annotations in JSON format. MUIAnno includes detailed annotations of common UI components such as buttons, input fields, navigation elements, and other key interface elements. In addition to presenting the dataset, we also provide benchmark experiments for UI element detection along with baseline results, offering a starting point for future research. We believe MUIAnno can support further work in mobile UI understanding and help improve systems that rely on accurate interpretation of interface elements.

LLM-as-a-Judge models generate chain-of-thought (CoT) sequences intended to capture the step-bystep reasoning process that underlies the final evaluation of a response. However, due to the lack of human annotated CoTs for evaluation, the required components and structure of effective reasoning traces remain understudied. Consequently, previous approaches often (1) constrain reasoning traces to hand-designed components, such as a list of criteria, reference answers, or verification questions and (2) structure them such that planning is intertwined with the reasoning for evaluation. In this work, we propose EvalPlanner, a preference optimization algorithm for Thinking-LLM-as-a-Judge that first generates an unconstrained evaluation plan, followed by its execution, and then the final judgment. In a self-training loop, EvalPlanner iteratively optimizes over synthetically constructed evaluation plans and executions, leading to better final verdicts. Our method achieves a new state-of-the-art performance for generative reward models on RewardBench (with a score of 93.9), despite being trained on fewer amount of, and synthetically generated, preference pairs. Additional experiments on other benchmarks like RM-Bench, JudgeBench, and FollowBenchEval further highlight the utility of both planning and reasoning for building robust LLM-as-a-Judge reasoning models.

The world is covered with millions of buildings, and precisely knowing each instance's position and extents is vital to a multitude of applications. Recently, automated building footprint segmentation models have shown superior detection accuracy thanks to the usage of Convolutional Neural Networks (CNN). However, even the latest evolutions struggle to precisely delineating borders, which often leads to geometric distortions and inadvertent fusion of adjacent building instances. We propose to overcome this issue by exploiting the distinct geometric properties of buildings. To this end, we present Deep Structured Active Contours (DSAC), a novel framework that integrates priors and constraints into the segmentation process, such as continuous boundaries, smooth edges, and sharp corners. To do so, DSAC employs Active Contour Models (ACM), a family of constraint- and prior-based polygonal models. We learn ACM parameterizations per instance using a CNN, and show how to incorporate all components in a structured output model, making DSAC trainable end-to-end. We evaluate DSAC on three challenging building instance segmentation datasets, where it compares favorably against state-of-the-art. Code will be made available.

Standard diffusion corrupts data using Gaussian noise whose Fourier coefficients have random magnitudes and random phases. While effective for unconditional or text-to-image generation, corrupting phase components destroys spatial structure, making it ill-suited for tasks requiring geometric consistency, such as re-rendering, simulation enhancement, and image-to-image translation. We introduce Phase-Preserving Diffusion φ-PD, a model-agnostic reformulation of the diffusion process that preserves input phase while randomizing magnitude, enabling structure-aligned generation without architectural changes or additional parameters. We further propose Frequency-Selective Structured (FSS) noise, which provides continuous control over structural rigidity via a single frequency-cutoff parameter. φ-PD adds no inference-time cost and is compatible with any diffusion model for images or videos. Across photorealistic and stylized re-rendering, as well as sim-to-real enhancement for driving planners, φ-PD produces controllable, spatially aligned results. When applied to the CARLA simulator, φ-PD improves CARLA-to-Waymo planner performance by 50\%. The method is complementary to existing conditioning approaches and broadly applicable to image-to-image and video-to-video generation. Videos, additional examples, and code are available on our https://yuzeng-at-tri.github.io/ppd-page/{project page}.

We consider the problem of generating a large collection of initial guesses for local minima of multimodal non-convex continuous optimization problems. The goal is for these initial guesses to be high-quality (i.e., a numerical solver converges quickly) and diverse (i.e., represent many different local minima). Identifying multiple locally optimal solutions enables flexible downstream decision-making, but typically requires expensive global search. Existing data-driven methods predict initial guesses using only the final converged optima from offline solver runs, which discards information about the local neighborhoods of solutions and limits the available training data. We propose GLENS (Global Search via Learning from Solver Iterates), a data-efficient global search method that leverages intermediate solver iterates as free data augmentation. GLENS consists of two components: a neighborhood structure model that uses diffusion models to learn the local geometry around optima conditioned on problem parameters, and a solver behavior model that learns refinement directions to further guide samples towards nearby optima during diffusion sampling. Experiments on modified non-convex benchmark problems and a two-robot obstacle-avoidance navigation problem show that GLENS generates high-quality initial guesses while preserving the multimodal distribution of diverse local optima. The resulting initial guesses lead to faster solver convergence across different problem settings and solvers. We also analyze how key hyperparameter choices affect the performance.

Despite the non-autoregressive potential of diffusion language models (dLLMs), existing decoding strategies demonstrate positional bias, failing to fully unlock the potential of arbitrary generation. In this work, we delve into the inherent spectral characteristics of dLLMs and present the first frequency-domain analysis showing that low-frequency components in hidden states primarily encode global structural information and long-range dependencies, while high-frequency components are responsible for characterizing local details. Based on this observation, we propose FourierSampler, which leverages a frequency-domain sliding window mechanism to dynamically guide the model to achieve a "structure-to-detail" generation. FourierSampler outperforms other inference enhancement strategies on LLADA and SDAR, achieving relative improvements of 20.4% on LLaDA1.5-8B and 16.0% on LLaDA-8B-Instruct. It notably surpasses similarly sized autoregressive models like Llama3.1-8B-Instruct.

Proteins are essential biological macromolecules that execute life functions. Local motifs within protein structures, such as active sites, are the most critical components for linking structure to function and are key to understanding protein evolution and enabling protein engineering. Existing computational methods struggle to identify and compare these local structures, which leaves a significant gap in understanding protein structures and harnessing their functions. This study presents PLASMA, the first deep learning framework for efficient and interpretable residue-level protein substructure alignment. We reformulate the problem as a regularized optimal transport task and leverage differentiable Sinkhorn iterations. For a pair of input protein structures, PLASMA outputs a clear alignment matrix with an interpretable overall similarity score. Through extensive quantitative evaluations and three biological case studies, we demonstrate that PLASMA achieves accurate, lightweight, and interpretable residue-level alignment. Additionally, we introduce PLASMA-PF, a training-free variant that provides a practical alternative when training data are unavailable. Our method addresses a critical gap in protein structure analysis tools and offers new opportunities for functional annotation, evolutionary studies, and structure-based drug design. Reproducibility is ensured via our official implementation at https://github.com/ZW471/PLASMA-Protein-Local-Alignment.git.