Daily Papers

VLM safety is commonly evaluated through input- and output-level classification. Such classification is necessary, but it does not reveal whether a safety state is accessible or controllable inside the model. We argue that multimodal safety evaluation should therefore report a controllability profile alongside behavioral classification, separating representation-level detectability, cross-modal specificity, intervention sensitivity, and benign-preserving selectivity. Using implicit toxicity as a stress case, we instantiate this profile on LlavaGuard and Qwen3.5 with sparse feature decompositions. LlavaGuard admits localized handles with a narrow benign-preserving intervention range and modest downstream safety gains, whereas Qwen3.5 supports strong representation-level readout but no comparable selective-control regime under the tested operators. These results show that internal readout and controllability can diverge. Future multimodal safety benchmarks should therefore report not only behavioral safety metrics, but also whether safety-relevant internal signals can be intervention-tested and controlled within a validated operating range.

Methods for making high-quality recommendations often rely on learning latent representations from interaction data. These methods, while performant, do not provide ready mechanisms for users to control the recommendation they receive. Our work tackles this problem by proposing LACE, a novel concept value bottleneck model for controllable text recommendations. LACE represents each user with a succinct set of human-readable concepts through retrieval given user-interacted documents and learns personalized representations of the concepts based on user documents. This concept based user profile is then leveraged to make recommendations. The design of our model affords control over the recommendations through a number of intuitive interactions with a transparent user profile. We first establish the quality of recommendations obtained from LACE in an offline evaluation on three recommendation tasks spanning six datasets in warm-start, cold-start, and zero-shot setups. Next, we validate the controllability of LACE under simulated user interactions. Finally, we implement LACE in an interactive controllable recommender system and conduct a user study to demonstrate that users are able to improve the quality of recommendations they receive through interactions with an editable user profile.

Realistic traffic simulation requires agents that imitate logged behavior and can also be steered along interpretable axes. Such controllability enables engineers to isolate variables, reproduce specific edge cases, and test autonomous systems without real-world risk. We introduce Controllable Neural Variational Agents (CNeVA), a controllable simulated-agent framework that learns to infer a per-agent Gaussian behavior latent from per-channel discounted returns via a closed-form conjugate variational update, conditioning a rectified-flow trajectory generator trained on a mixed channel-mask curriculum for classifier-free guidance. To tackle scarcity in reward signals, we propose soft eligibility gates that replace hard binary thresholds with smooth exponential decay, preserving the gradient signal for near-threshold agents. On the Waymo Open Motion Dataset, CNeVA attains competitive realism on the benchmark while exposing per-channel controllability that the higher-ranked imitation models lack. Speed- and acceleration-based steering produces monotone responses without stall-induced reward hacking. Safety controllability is monotone and substantial with the introduction of soft eligibility. We manage to achieve steerable map compliance under a context-residual return measure. Furthermore, our experiment demonstrates that steering metrics must be read alongside physical-plausibility guardrails to avoid reward-hacking confounds.

We study the parameter dependence and transversality properties of trajectories of the controlled ODE $ U_x = P, qquad P_x = - f(U) - βP + tilde α(x)U, arising from traveling-wave solutions of a bistable reaction-diffusion equation with control. Optimal profiles minimizing the L^1-norm of the control \tilde α are determined by the unstable and stable manifolds Γ_u, Γ_s, the critical curve P^*(U) = Uf(U), and the associated function F(U) = dP^*{dU} + f(U){P^*(U)}. We establish generic transversality properties for these objects with respect to perturbations of the speed β and the nonlinear source f, together with quantitative estimates on the first- and second-order dependence of the invariant manifolds on these parameters. We also analyze the loss of regularity at the critical speed β^{**}, where the unstable manifold approaches the strongly stable manifold of the equilibrium (U^*,0)$. These results provide the ODE ingredients used in the analysis of the structure and regularity of optimal profiles in paper [S. Bianchini and C. Trifone. Traveling profiles and control cost for a PDE describing the evolution of invasive species. 2026. arXiv: 2606.23979 [math.OC]].

Leaderboards rank long-horizon agents by their final outputs. Yet a higher score alone does not establish whether two systems are comparable or which stage accounts for the difference. Unequal evidence, inputs, or budgets can affect scores, and statistical corrections do not remove this mismatch. We introduce compositional controllability to address these questions. A comparison window covers one stage, several stages, or the whole agent. Our central result bounds the gap between observed and controlled score differences using only nuisance outside the window. This yields an admissibility test applied before scores are inspected. Inadmissible comparisons are refused. For admissible pairs, an ordering is certified only when the score gap exceeds the combined sampling and nuisance radii; otherwise, it remains undecided. These decisions give each system a rank interval. We introduce BioLitBench, a benchmark of 2,042 biomedical articles represented as structured claim graphs. Among seven published pipelines, a conventional statistical analysis declares a winner in 14 of 21 pairwise comparisons. Yet the top-ranked system alone received the target review's bibliography. To isolate pipeline performance, our test requires matched inputs and a fixed backbone model. It refuses 11 of the 21 comparisons, including every comparison involving the top-ranked system. Seven of the 14 conventional conclusions fall within these refused pairs. The same comparison windows support stage-level training. We train SCRIBE on Qwen3.8-27B using rewards measured at each stage's exit. Under matched evidence, SCRIBE achieves a certified rank interval of [1,2], with certified advantages over all evaluated published pipelines and the evaluated Claude and OpenAI agents. Under same pool, SCRIBE matches the strongest published retriever and is certified above three published pipelines.

As generative models become ubiquitous, there is a critical need for fine-grained control over the generation process. Yet, while controlled generation methods from prompting to fine-tuning proliferate, a fundamental question remains unanswered: are these models truly controllable in the first place? In this work, we provide a theoretical framework to formally answer this question. Framing human-model interaction as a control process, we propose a novel algorithm to estimate the controllable sets of models in a dialogue setting. Notably, we provide formal guarantees on the estimation error as a function of sample complexity: we derive probably-approximately correct bounds for controllable set estimates that are distribution-free, employ no assumptions except for output boundedness, and work for any black-box nonlinear control system (i.e., any generative model). We empirically demonstrate the theoretical framework on different tasks in controlling dialogue processes, for both language models and text-to-image generation. Our results show that model controllability is surprisingly fragile and highly dependent on the experimental setting. This highlights the need for rigorous controllability analysis, shifting the focus from simply attempting control to first understanding its fundamental limits.

Controllable generation is considered a potentially vital approach to address the challenge of annotating 3D data, and the precision of such controllable generation becomes particularly imperative in the context of data production for autonomous driving. Existing methods focus on the integration of diverse generative information into controlling inputs, utilizing frameworks such as GLIGEN or ControlNet, to produce commendable outcomes in controllable generation. However, such approaches intrinsically restrict generation performance to the learning capacities of predefined network architectures. In this paper, we explore the innovative integration of controlling information and introduce PerLDiff (Perspective-Layout Diffusion Models), a novel method for effective street view image generation that fully leverages perspective 3D geometric information. Our PerLDiff employs 3D geometric priors to guide the generation of street view images with precise object-level control within the network learning process, resulting in a more robust and controllable output. Moreover, it demonstrates superior controllability compared to alternative layout control methods. Empirical results justify that our PerLDiff markedly enhances the precision of controllable generation on the NuScenes and KITTI datasets.

In latent diffusion models, the autoencoder (AE) is typically expected to balance two capabilities: faithful reconstruction and a generation-friendly latent space (e.g., low gFID). In recent ImageNet-scale AE studies, we observe a systematic bias toward generative metrics in handling this trade-off: reconstruction metrics are increasingly under-reported, and ablation-based AE selection often favors the best-gFID configuration even when reconstruction fidelity degrades. We theoretically analyze why this gFID-dominant preference can appear unproblematic for ImageNet generation, yet becomes risky when scaling to controllable diffusion: AEs can induce condition drift, which limits achievable condition alignment. Meanwhile, we find that reconstruction fidelity, especially instance-level measures, better indicates controllability. We empirically validate the impact of tilted autoencoder evaluation on controllability by studying several recent ImageNet AEs. Using a multi-dimensional condition-drift evaluation protocol reflecting controllable generation tasks, we find that gFID is only weakly predictive of condition preservation, whereas reconstruction-oriented metrics are substantially more aligned. ControlNet experiments further confirm that controllability tracks condition preservation rather than gFID. Overall, our results expose a gap between ImageNet-centric AE evaluation and the requirements of scalable controllable diffusion, offering practical guidance for more reliable benchmarking and model selection.

Prompt engineering is crucial for deploying LLMs but is poorly understood mathematically. We formalize LLM systems as a class of discrete stochastic dynamical systems to explore prompt engineering through the lens of control theory. We investigate the reachable set of output token sequences R_y(mathbf x_0) for which there exists a control input sequence mathbf u for each mathbf y in R_y(mathbf x_0) that steers the LLM to output mathbf y from initial state sequence mathbf x_0. We offer analytic analysis on the limitations on the controllability of self-attention in terms of reachable set, where we prove an upper bound on the reachable set of outputs R_y(mathbf x_0) as a function of the singular values of the parameter matrices. We present complementary empirical analysis on the controllability of a panel of LLMs, including Falcon-7b, Llama-7b, and Falcon-40b. Our results demonstrate a lower bound on the reachable set of outputs R_y(mathbf x_0) w.r.t. initial state sequences mathbf x_0 sampled from the Wikitext dataset. We find that the correct next Wikitext token following sequence mathbf x_0 is reachable over 97% of the time with prompts of kleq 10 tokens. We also establish that the top 75 most likely next tokens, as estimated by the LLM itself, are reachable at least 85% of the time with prompts of kleq 10 tokens. Intriguingly, short prompt sequences can dramatically alter the likelihood of specific outputs, even making the least likely tokens become the most likely ones. This control-centric analysis of LLMs demonstrates the significant and poorly understood role of input sequences in steering output probabilities, offering a foundational perspective for enhancing language model system capabilities.

One of the key capabilities of intelligent agents is the ability to discover useful skills without external supervision. However, the current unsupervised skill discovery methods are often limited to acquiring simple, easy-to-learn skills due to the lack of incentives to discover more complex, challenging behaviors. We introduce a novel unsupervised skill discovery method, Controllability-aware Skill Discovery (CSD), which actively seeks complex, hard-to-control skills without supervision. The key component of CSD is a controllability-aware distance function, which assigns larger values to state transitions that are harder to achieve with the current skills. Combined with distance-maximizing skill discovery, CSD progressively learns more challenging skills over the course of training as our jointly trained distance function reduces rewards for easy-to-achieve skills. Our experimental results in six robotic manipulation and locomotion environments demonstrate that CSD can discover diverse complex skills including object manipulation and locomotion skills with no supervision, significantly outperforming prior unsupervised skill discovery methods. Videos and code are available at https://seohong.me/projects/csd/

A central aspiration of mechanistic interpretability is controllability: if we know where a behavior is represented in a model's activations, we should be able to modify it. This rests on a hidden premise -- that the direction which detects a behavior and the direction which controls it are the same, or close. We test this geometrically: what is the angle between the direction that best detects a behavior and the one that best causes it? If detection implies control the cosine is near 1; otherwise it quantifies a detection-intervention gap. On Gemma 2-2B-it, output format (clean JSON vs markdown fencing) collapses both roles onto one axis. Hallucination does not: the model detects fake entities with perfect linear separability (AUC = 1.000 from layer 5), yet that direction sits at cos = 0.12 (about 83 degrees) from the direction producing a refusal -- a small, reproducible alignment, far from the cos = 1 that "detection is control" would require. A detector built from activations, with no chosen tokens, likewise fails to align (cos = -0.06). The gap generalizes: across four models from three families and two scales (1B-9B), cos stays in [0.12, 0.20], identical before and after instruction tuning (0.1197 vs 0.1200), placing its origin in pretraining. A 15-degree rotation toward the refusal direction partially bridges it -- 73% and 60% refusal on two held-out fake-entity categories at 1.8% false positives. We then ask whether this cosine predicts steerability, and it does not: detection is a high-dimensional class, not a single direction, and what separates the steerable case is functional, not readable from a static angle. The cosine is a weight-computable signature of the dissociation between knowing and steering, not a predictor of it.

Video world models simulate future states conditioned on current observations and user actions. Recent systems have demonstrated impressive video consistency and action controllability over long sequences. However, fairly comparing these interactive models remains challenging. In practice, a human player typically evaluates a world model by pursuing long-horizon objectives through interaction. For example, a user may turn around 360 degrees to see whether the environment remains consistent, or walk into the water and inspect whether realistic water ripples are generated. The action sequence required to achieve the same objective may vary substantially between models, making fixed action-conditioned evaluation unsuitable for cross-model comparison. To address this, we employ multi-modal Agent Players to interact with world models toward specified long-horizon objectives. Building on this paradigm, we introduce PlayWorld, a benchmark providing 171 scenarios, each with a specified objective. To evaluate performance thoroughly, we assess models along four core dimensions: geometry consistency, interaction fidelity, out-of-sight evolution, and insight evolution. In addition, we incorporate basic ability metrics for video quality and controllability. Experiments across nine state-of-the-art world models reveal that current models remain unreliable on long-horizon interactive objectives, particularly in maintaining spatial consistency and persistent state evolution. Code and data are available at https://github.com/kxding/PlayWorld.

We examine two properties of AI systems: capability (what a system can do) and steerability (how reliably one can shift behavior toward intended outcomes). A central question is whether capability growth reduces steerability and risks control collapse. We also distinguish between authorized steerability (builders reliably reaching intended behaviors) and unauthorized steerability (attackers eliciting disallowed behaviors). This distinction highlights a fundamental safety--security dilemma of AI models: safety requires high steerability to enforce control (e.g., stop/refuse), while security requires low steerability for malicious actors to elicit harmful behaviors. This tension presents a significant challenge for open-weight models, which currently exhibit high steerability via common techniques like fine-tuning or adversarial attacks. Using Qwen3 and InstrumentalEval, we find that a short anti-instrumental prompt suffix sharply reduces the measured convergence rate (e.g., shutdown avoidance, self-replication). For Qwen3-30B Instruct, the convergence rate drops from 81.69% under a pro-instrumental suffix to 2.82% under an anti-instrumental suffix. Under anti-instrumental prompting, larger aligned models show lower convergence rates than smaller ones (Instruct: 2.82% vs. 4.23%; Thinking: 4.23% vs. 9.86%). Code is available at github.com/j-hoscilowicz/instrumental_steering.

Large language models exhibit recurring behavioural patterns -- personas -- that shape generalisation and safety, but we lack reliable tools for decomposing, measuring, and controlling them. Our central insight is to treat personas as positions in a space of behavioural traits, using the OCEAN framework to describe model personas in terms of Openness, Conscientiousness, Extraversion, Agreeableness, and Neuroticism. We train low-rank adapters to amplify or suppress individual traits, and evaluate their effects using an LLM-judge calibrated against a human-validated panel, trait-specific multiple-choice benchmarks, and standard capability evaluations. Across six models from three families (4B-32B), we find that each adapter moves its target trait largely monotonically with scale, combines approximately additively with other adapters to construct mixed personas, and preserves performance on capability benchmarks at moderate scales. We further show that the induced trait axes affect safety-relevant behaviour in downstream evaluations: for example, moving along neuroticism and agreeableness axes affects frustration and sycophancy respectively. We also introduce an unsupervised psychometric pipeline that recovers four interpretable behavioural factors (tone, initiative, didacticism, epistemic caution) from model rollouts. Persona control can then be considered in terms of learning, scaling, and composing traits in weight space, providing a bridge between personality measurement, model editing, and safety.

Controllability plays a crucial role in video generation since it allows users to create desired content. However, existing models largely overlooked the precise control of camera pose that serves as a cinematic language to express deeper narrative nuances. To alleviate this issue, we introduce CameraCtrl, enabling accurate camera pose control for text-to-video(T2V) models. After precisely parameterizing the camera trajectory, a plug-and-play camera module is then trained on a T2V model, leaving others untouched. Additionally, a comprehensive study on the effect of various datasets is also conducted, suggesting that videos with diverse camera distribution and similar appearances indeed enhance controllability and generalization. Experimental results demonstrate the effectiveness of CameraCtrl in achieving precise and domain-adaptive camera control, marking a step forward in the pursuit of dynamic and customized video storytelling from textual and camera pose inputs. Our project website is at: https://hehao13.github.io/projects-CameraCtrl/.

World models can foresee the outcomes of different actions, which is of paramount importance for autonomous driving. Nevertheless, existing driving world models still have limitations in generalization to unseen environments, prediction fidelity of critical details, and action controllability for flexible application. In this paper, we present Vista, a generalizable driving world model with high fidelity and versatile controllability. Based on a systematic diagnosis of existing methods, we introduce several key ingredients to address these limitations. To accurately predict real-world dynamics at high resolution, we propose two novel losses to promote the learning of moving instances and structural information. We also devise an effective latent replacement approach to inject historical frames as priors for coherent long-horizon rollouts. For action controllability, we incorporate a versatile set of controls from high-level intentions (command, goal point) to low-level maneuvers (trajectory, angle, and speed) through an efficient learning strategy. After large-scale training, the capabilities of Vista can seamlessly generalize to different scenarios. Extensive experiments on multiple datasets show that Vista outperforms the most advanced general-purpose video generator in over 70% of comparisons and surpasses the best-performing driving world model by 55% in FID and 27% in FVD. Moreover, for the first time, we utilize the capacity of Vista itself to establish a generalizable reward for real-world action evaluation without accessing the ground truth actions.

Chain-of-thought (CoT) monitoring is a promising tool for detecting misbehaviors and understanding the motivations of modern reasoning models. However, if models can control what they verbalize in their CoT, it could undermine CoT monitorability. To measure this undesirable capability -- CoT controllability -- we introduce the CoT-Control evaluation suite, which includes tasks that require models to solve problems while adhering to CoT instructions, e.g., reasoning about a genetics question without using the word 'chromosome'. We show that reasoning models possess significantly lower CoT controllability than output controllability; for instance, Claude Sonnet 4.5 can control its CoT only 2.7% of the time but 61.9% when controlling its final output. We also find that CoT controllability is higher for larger models and decreases with more RL training, test-time compute, and increased problem difficulty. CoT controllability failures extend even to situations in which models are given incentives (as opposed to direct requests) to evade CoT monitors, although models exhibit slightly higher controllability when they are told they are being monitored. Similarly, eliciting controllability by adversarially optimizing prompts does not meaningfully increase controllability. Our results leave us cautiously optimistic that CoT controllability is currently unlikely to be a failure mode of CoT monitorability. However, the mechanism behind low controllability is not well understood. Given its importance for maintaining CoT monitorability, we recommend that frontier labs track CoT controllability in future models.

In recent years, significant progress has been made in the development of text-to-image generation models. However, these models still face limitations when it comes to achieving full controllability during the generation process. Often, specific training or the use of limited models is required, and even then, they have certain restrictions. To address these challenges, A two-stage method that effectively combines controllability and high quality in the generation of images is proposed. This approach leverages the expertise of pre-trained models to achieve precise control over the generated images, while also harnessing the power of diffusion models to achieve state-of-the-art quality. By separating controllability from high quality, This method achieves outstanding results. It is compatible with both latent and image space diffusion models, ensuring versatility and flexibility. Moreover, This approach consistently produces comparable outcomes to the current state-of-the-art methods in the field. Overall, This proposed method represents a significant advancement in text-to-image generation, enabling improved controllability without compromising on the quality of the generated images.

To enhance the controllability of text-to-image diffusion models, current ControlNet-like models have explored various control signals to dictate image attributes. However, existing methods either handle conditions inefficiently or use a fixed number of conditions, which does not fully address the complexity of multiple conditions and their potential conflicts. This underscores the need for innovative approaches to manage multiple conditions effectively for more reliable and detailed image synthesis. To address this issue, we propose a novel framework, DynamicControl, which supports dynamic combinations of diverse control signals, allowing adaptive selection of different numbers and types of conditions. Our approach begins with a double-cycle controller that generates an initial real score sorting for all input conditions by leveraging pre-trained conditional generation models and discriminative models. This controller evaluates the similarity between extracted conditions and input conditions, as well as the pixel-level similarity with the source image. Then, we integrate a Multimodal Large Language Model (MLLM) to build an efficient condition evaluator. This evaluator optimizes the ordering of conditions based on the double-cycle controller's score ranking. Our method jointly optimizes MLLMs and diffusion models, utilizing MLLMs' reasoning capabilities to facilitate multi-condition text-to-image (T2I) tasks. The final sorted conditions are fed into a parallel multi-control adapter, which learns feature maps from dynamic visual conditions and integrates them to modulate ControlNet, thereby enhancing control over generated images. Through both quantitative and qualitative comparisons, DynamicControl demonstrates its superiority over existing methods in terms of controllability, generation quality and composability under various conditional controls.

To enhance controllability in text-to-image generation, ControlNet introduces image-based control signals, while ControlNet++ improves pixel-level cycle consistency between generated images and the input control signal. To avoid the prohibitive cost of back-propagating through the sampling process, ControlNet++ optimizes only low-noise timesteps (e.g., t < 200) using a single-step approximation, which not only ignores the contribution of high-noise timesteps but also introduces additional approximation errors. A straightforward alternative for optimizing controllability across all timesteps is Direct Preference Optimization (DPO), a fine-tuning method that increases model preference for more controllable images (I^{w}) over less controllable ones (I^{l}). However, due to uncertainty in generative models, it is difficult to ensure that win--lose image pairs differ only in controllability while keeping other factors, such as image quality, fixed. To address this, we propose performing preference learning over control conditions rather than generated images. Specifically, we construct winning and losing control signals, c^{w} and c^{l}, and train the model to prefer c^{w}. This method, which we term Condition Preference Optimization (CPO), eliminates confounding factors and yields a low-variance training objective. Our approach theoretically exhibits lower contrastive loss variance than DPO and empirically achieves superior results. Moreover, CPO requires less computation and storage for dataset curation. Extensive experiments show that CPO significantly improves controllability over the state-of-the-art ControlNet++ across multiple control types: over 10% error rate reduction in segmentation, 70--80% in human pose, and consistent 2--5% reductions in edge and depth maps.

We present GEM, a Generalizable Ego-vision Multimodal world model that predicts future frames using a reference frame, sparse features, human poses, and ego-trajectories. Hence, our model has precise control over object dynamics, ego-agent motion and human poses. GEM generates paired RGB and depth outputs for richer spatial understanding. We introduce autoregressive noise schedules to enable stable long-horizon generations. Our dataset is comprised of 4000+ hours of multimodal data across domains like autonomous driving, egocentric human activities, and drone flights. Pseudo-labels are used to get depth maps, ego-trajectories, and human poses. We use a comprehensive evaluation framework, including a new Control of Object Manipulation (COM) metric, to assess controllability. Experiments show GEM excels at generating diverse, controllable scenarios and temporal consistency over long generations. Code, models, and datasets are fully open-sourced.

Controllable music generation promotes the interaction between humans and composition systems by projecting the users' intent on their desired music. The challenge of introducing controllability is an increasingly important issue in the symbolic music generation field. When building controllable generative popular multi-instrument music systems, two main challenges typically present themselves, namely weak controllability and poor music quality. To address these issues, we first propose spatiotemporal features as powerful and fine-grained controls to enhance the controllability of the generative model. In addition, an efficient music representation called REMI_Track is designed to convert multitrack music into multiple parallel music sequences and shorten the sequence length of each track with Byte Pair Encoding (BPE) techniques. Subsequently, we release BandControlNet, a conditional model based on parallel Transformers, to tackle the multiple music sequences and generate high-quality music samples that are conditioned to the given spatiotemporal control features. More concretely, the two specially designed modules of BandControlNet, namely structure-enhanced self-attention (SE-SA) and Cross-Track Transformer (CTT), are utilized to strengthen the resulting musical structure and inter-track harmony modeling respectively. Experimental results tested on two popular music datasets of different lengths demonstrate that the proposed BandControlNet outperforms other conditional music generation models on most objective metrics in terms of fidelity and inference speed and shows great robustness in generating long music samples. The subjective evaluations show BandControlNet trained on short datasets can generate music with comparable quality to state-of-the-art models, while outperforming them significantly using longer datasets.

Embodied agents are expected to accomplish real-world goals by deciding for themselves how and when to interact with their surroundings. For many such goals, changing the physical state of the world is the means rather than the end: the agent changes the state of a system through interaction, observes the feedback, and explores until it either achieves the goal itself (e.g., discovering physical laws) or learns what the goal requires; it acts to know. Manipulation benchmarks stop at acting to change, with the target state given; scientific discovery benchmarks evaluate knowing but replace physical experimentation with symbolic actions or numerical queries. We introduce EmbodiedLab, a benchmark in which a robot must act to know. Quantitative science experiments make this setting controllable: the parameters of the system are resampled for every instance, so the result cannot be known in advance, yet it can be scored exactly. Across 30 experiments in five disciplines on 14 apparatus platforms, the agent receives an objective and the apparatus, chooses its own procedure, and operates a physics-based simulated laboratory, reading the instruments through its cameras. Evaluation checks what the agent came to know, grounded in readings recorded during the episode, as well as the physical state the task requires; every experiment is verified to be solvable. We evaluate six frontier models in their developers' coding agents with native observation and control, with added perception and motion planning, and with manipulation skills distilled from the strongest agents. With native control, even the strongest agent succeeds less than half the time; for every agent, most failures arise in interacting with the apparatus, and manipulation skills help weaker agents more than perception and planning. The benchmark and its evaluation code are available at https://github.com/HexaFuture/EmbodiedLab.

This paper is devoted to the averaged controllability of the random Schrödinger equation, with diffusivity as a random variable drawn from a general probability distribution. First, we show that the solutions to these random Schrödinger equations are null averaged controllable with an open-loop control independent of randomness from any arbitrary subset of the domain with strictly positive measure and in any time. This is done for an interesting class of random variables, including certain stable distributions, specifically recovering the known result when the random diffusivity follows a normal or Cauchy distribution. Second, by the Riemann-Lebesgue lemma, we prove for any time the lack of averaged exact controllability in a L^2 setting for all absolutely continuous random variables. Notably, this implies that this property is not inherited from the exact controllability of the Schrödinger equation. Third, we show that simultaneous null controllability is not possible except for a finite number of scenarios. Finally, we perform numerical simulations that robustly validate the theoretical results.

Robotic systems often exhibit unstable modes, along which small perturbations and disturbances can cause unbounded growth unless corrected through feedback. Controlling such systems from high-dimensional visual observations requires representations that preserve these modes. Joint-embedding predictive architectures (JEPAs) provide a natural framework for learning such representations and their dynamics from visual data. However, we demonstrate that next step prediction combined with anti-collapse regularization does not guarantee that controllable unstable modes are preserved: the training loss can be minimized while these modes are collapsed, making stabilization from the learned representation impossible. To address this, we augment world-model training with an action reconstruction objective (i.e., an inverse dynamics loss) that encourages control-aware representations, namely, visual representations that preserve crucial features for control. We prove that exact action reconstruction makes the encoder injective on the finite-horizon reachable subspace. Thus, the encoder cannot discard any state direction reachable by an action sequence within H steps. Moreover, we show that, as H grows, the dominant eigenspace of the finite-horizon controllability Gramian converges to the controllable unstable subspace. We establish our theoretical results for linear systems and demonstrate empirically that our findings extend to nonlinear visual control tasks (CartPole, Walker2D, and PointMaze), highlighting the benefits of control-aware representation learning.

We introduce controlgym, a library of thirty-six safety-critical industrial control settings, and ten infinite-dimensional partial differential equation (PDE)-based control problems. Integrated within the OpenAI Gym/Gymnasium (Gym) framework, controlgym allows direct applications of standard reinforcement learning (RL) algorithms like stable-baselines3. Our control environments complement those in Gym with continuous, unbounded action and observation spaces, motivated by real-world control applications. Moreover, the PDE control environments uniquely allow the users to extend the state dimensionality of the system to infinity while preserving the intrinsic dynamics. This feature is crucial for evaluating the scalability of RL algorithms for control. This project serves the learning for dynamics & control (L4DC) community, aiming to explore key questions: the convergence of RL algorithms in learning control policies; the stability and robustness issues of learning-based controllers; and the scalability of RL algorithms to high- and potentially infinite-dimensional systems. We open-source the controlgym project at https://github.com/xiangyuan-zhang/controlgym.

Reliable deployment of language models requires two capabilities that appear distinct but share a common geometric foundation: predicting whether a model will accept targeted behavioral control, and detecting when its internal structure degrades. We show that geometric stability, the consistency of a representation's pairwise distance structure, addresses both. Supervised Shesha variants that measure task-aligned geometric stability predict linear steerability with near-perfect accuracy (ρ= 0.89-0.97) across 35-69 embedding models and three NLP tasks, capturing unique variance beyond class separability (partial ρ= 0.62-0.76). A critical dissociation emerges: unsupervised stability fails entirely for steering on real-world tasks (ρapprox 0.10), revealing that task alignment is essential for controllability prediction. However, unsupervised stability excels at drift detection, measuring nearly 2times greater geometric change than CKA during post-training alignment (up to 5.23times in Llama) while providing earlier warning in 73\% of models and maintaining a 6times lower false alarm rate than Procrustes. Together, supervised and unsupervised stability form complementary diagnostics for the LLM deployment lifecycle: one for pre-deployment controllability assessment, the other for post-deployment monitoring.

Large Language Models (LLMs) can adopt distinct personas to tune their semantics, expertise, and perspective to different users and tasks. Precise control over these traits is critical to ensure safety and reliability in model behavior. Existing methods like activation steering and prompt-based persona induction reduce a persona to a single dominant direction, missing the finer, nested traits that emerge only once that dominant signal is factored out. We introduce modulation as a setting where the persona context is already embedded in the content being manipulated, requiring control methods to amplify or suppress a trait already present rather than inject it from scratch. PaSS is an inference-time control paradigm that models personas as multi-dimensional subspaces in a model's latent space without supervised contrastive examples. The persona subspaces are extracted via iterative concept erasure and applied to modulate persona-guided generation without retraining. To extract this subspace, we use Iterative Nullspace Projections (INLP) to linearly and iteratively isolate persona-specific directions. We causally evaluate six personas against diverse tasks like MATH-500, TinyAlpaca, GSM8K, and IFEval, showing that discriminative, iterative subspace extraction captures diverse traits underlying a given persona, enabling stronger and larger modulation than single-direction additive methods, while maintaining content fidelity. We further study individual peeled directions within each subspace to uncover the distinct aspects of persona behavior they encode. Overall, we show that persona subspaces offer a controllable, interpretable, and generalizable framework for modulating LLM behavior without sacrificing task performance.

Personality manipulation in large language models (LLMs) is increasingly applied in customer service and agentic scenarios, yet its mechanisms and trade-offs remain unclear. We present a systematic study of personality control using the Big Five traits, comparing in-context learning (ICL), parameter-efficient fine-tuning (PEFT), and mechanistic steering (MS). Our contributions are fourfold. First, we construct a contrastive dataset with balanced high/low trait responses, enabling effective steering vector computation and fair cross-method evaluation. Second, we introduce a unified evaluation framework based on within-run Delta analysis that disentangles, reasoning capability, agent performance, and demographic bias across MMLU, GAIA, and BBQ benchmarks. Third, we develop trait purification techniques to separate openness from conscientiousness, addressing representational overlap in trait encoding. Fourth, we propose a three-level stability framework that quantifies method-, trait-, and combination-level robustness, offering practical guidance under deployment constraints. Experiments on Gemma-2-2B-IT and LLaMA-3-8B-Instruct reveal clear trade-offs: ICL achieves strong alignment with minimal capability loss, PEFT delivers the highest alignment at the cost of degraded task performance, and MS provides lightweight runtime control with competitive effectiveness. Trait-level analysis shows openness as uniquely challenging, agreeableness as most resistant to ICL, and personality encoding consolidating around intermediate layers. Taken together, these results establish personality manipulation as a multi-level probe into behavioral representation, linking surface conditioning, parameter encoding, and activation-level steering, and positioning mechanistic steering as a lightweight alternative to fine-tuning for both deployment and interpretability.

Steering vectors work for some concepts and layers but fail for others, and practitioners have no way to predict which setting applies before running an intervention. We introduce the Linear Accessibility Profile (LAP), a per-layer diagnostic that repurposes the logit lens as a predictor of steering vector effectiveness. The key measure, A_{lin}, applies the model's unembedding matrix to intermediate hidden states, requiring no training. Across 24 controlled binary concept families on five models (Pythia-2.8B to Llama-8B), peak A_{lin} predicts steering effectiveness at ρ= +0.86 to +0.91 and layer selection at ρ= +0.63 to +0.92. A three-regime framework explains when difference-of-means steering works, when nonlinear methods are needed, and when no method can work. An entity-steering demo confirms the prediction end-to-end: steering at the LAP-recommended layer redirects completions on Gemma-2-2B and OLMo-2-1B-Instruct, while the middle layer (the standard heuristic) has no effect on either model.

We present EBench, a simulation benchmark that diagnoses generalist mobile manipulation policies beyond a single success-rate scalar. EBench comprises 26 diverse and challenging manipulation tasks annotated along 5 capability dimensions and 4 generalization dimensions. We evaluate state-of-the-art generalist manipulation models including π_0, π_{0.5}, XVLA, and InternVLA-A1, and reveal that models with near success rates exhibit strikingly different capability profiles: π_{0.5} achieves the highest test success rate and the best train--test retention, whereas InternVLA-A1 dominates mobile manipulation but collapses on dexterous tasks, and XVLA exhibits strengths on a disjoint set of atomic skills compared to other policies. Beyond capability profiling, EBench analyzes the generalization ability from 4 representative perspectives, identifying the impact of different distribution shift factors. The results reveal strengths and weaknesses of models behind an overall score. We hope this benchmark offers a broad set of diagnostic signals to guide iteration on generalist manipulation models.

With the rapid progress of diffusion models and large-scale video generation, generative world models are increasingly expected to replace traditional simulators, including physics engines, game engines, and reinforcement-learning environments. Yet the remaining distance from generation to simulation lacks a systematic assessment. We present a capability-based study using an external yardstick: eight capabilities of a traditional simulator, namely asset construction, physics engine, interaction, controllability, stability, state feedback, diversity, and evaluation metrics. We trace three main technical routes--latent dynamics, video generation, and joint-embedding prediction--and map exactly 200 representative works published from 2018 to June 2026 onto these capabilities. Our analysis shows that world models have achieved functional substitution in interaction and controllability for specific scenarios, but remain short of traditional simulators in formal guarantees of physical laws, structured state feedback, and reproducible long-horizon evolution. State feedback is the most neglected cross-route shortcoming: only 6 of 163 implementation papers expose a runtime interface for querying entity states or physical parameters. We identify six research directions: formalized physics, a unified action interface, first-class state feedback, long-horizon stability, downstream-utility evaluation, and cross-route hybridization. Project page: https://github.com/AtongWang/world-model-simulators

An AI control protocol is a plan for usefully deploying AI systems that aims to prevent an AI from intentionally causing some unacceptable outcome. This paper investigates how well AI systems can generate and act on their own strategies for subverting control protocols whilst operating statelessly (without shared memory between contexts). To do this, an AI system may need to reliably generate optimal plans in each context, take actions with well-calibrated probabilities, and coordinate plans with other instances of itself without communicating. We develop Subversion Strategy Eval, a suite of eight environments, covering a range of protocols and strategic capabilities, and six sets of affordances that help isolate individual capabilities. We implement the evaluation in Inspect-AI and release it open-source. We evaluate Claude 3.5 models, including helpful-only versions, as well as OpenAI reasoning models. None of the models demonstrate substantial capability in strategizing to subvert control protocols statelessly. However, providing models with additional affordances, such as the ability to share a plan between contexts, can substantially improve performance. We hope our evaluations can act as a leading indicator for when models are capable of subverting control protocols and also relax the worst-case assumption of perfect strategic ability in AI control evaluations.

We propose DOME, a diffusion-based world model that predicts future occupancy frames based on past occupancy observations. The ability of this world model to capture the evolution of the environment is crucial for planning in autonomous driving. Compared to 2D video-based world models, the occupancy world model utilizes a native 3D representation, which features easily obtainable annotations and is modality-agnostic. This flexibility has the potential to facilitate the development of more advanced world models. Existing occupancy world models either suffer from detail loss due to discrete tokenization or rely on simplistic diffusion architectures, leading to inefficiencies and difficulties in predicting future occupancy with controllability. Our DOME exhibits two key features:(1) High-Fidelity and Long-Duration Generation. We adopt a spatial-temporal diffusion transformer to predict future occupancy frames based on historical context. This architecture efficiently captures spatial-temporal information, enabling high-fidelity details and the ability to generate predictions over long durations. (2)Fine-grained Controllability. We address the challenge of controllability in predictions by introducing a trajectory resampling method, which significantly enhances the model's ability to generate controlled predictions. Extensive experiments on the widely used nuScenes dataset demonstrate that our method surpasses existing baselines in both qualitative and quantitative evaluations, establishing a new state-of-the-art performance on nuScenes. Specifically, our approach surpasses the baseline by 10.5% in mIoU and 21.2% in IoU for occupancy reconstruction and by 36.0% in mIoU and 24.6% in IoU for 4D occupancy forecasting.

Controllable character animation is an emerging task that generates character videos controlled by pose sequences from given character images. Although character consistency has made significant progress via reference UNet, another crucial factor, pose control, has not been well studied by existing methods yet, resulting in several issues: 1) The generation may fail when the input pose sequence is corrupted. 2) The hands generated using the DWPose sequence are blurry and unrealistic. 3) The generated video will be shaky if the pose sequence is not smooth enough. In this paper, we present RealisDance to handle all the above issues. RealisDance adaptively leverages three types of poses, avoiding failed generation caused by corrupted pose sequences. Among these pose types, HaMeR provides accurate 3D and depth information of hands, enabling RealisDance to generate realistic hands even for complex gestures. Besides using temporal attention in the main UNet, RealisDance also inserts temporal attention into the pose guidance network, smoothing the video from the pose condition aspect. Moreover, we introduce pose shuffle augmentation during training to further improve generation robustness and video smoothness. Qualitative experiments demonstrate the superiority of RealisDance over other existing methods, especially in hand quality.

Achieving a desired impedance during physical interaction remains a central problem in compliant control. In many practical implementations, admittance control combined with linear position controllers is employed, but this structure typically results in only approximate impedance behavior. This paper establishes a rigorous equivalence between the impedance realization problem and the generalized output regulation theory, and shows that, under the admittance architecture and assuming the inner position controller is restricted to linear combinations of commonly used signals, a unique control law exists that achieves exact compliant control. The resulting controller introduces additional terms with respect to a conventional PD formulation, while preserving a simple structure. Numerical simulations are used to illustrate the effectiveness of the proposed approach under nominal conditions and in the presence of model uncertainties, and to compare its performance against a standard PD controller. The results demonstrate improved interaction performance and robustness, supporting the theoretical analysis.

Slider-based control aims to give users continuous, fine-grained control over the intensity of individual edits in instruction-based image editing. However, existing approaches fail to deliver reliable continuous controllability: traversing a slider can produce abrupt visual jumps and non-monotonic changes, while jointly controlled sliders can interfere with one another. To systematically study these limitations, we introduce SlideBench, a comprehensive benchmark for continuous image editing spanning diverse editing categories and equipped with a unified suite of metrics quantifying monotonic progression, perceptual continuity, and inter-slider disentanglement. Building on these observations, we propose SliderEdit++, which explicitly regularizes the intermediate editing trajectory rather than supervising only its endpoints. Our method combines velocity- and semantic-space trajectory regularization with spectral control to encourage smooth, predictable slider traversal, together with a disentanglement objective that reduces interference between independently controlled edits. On SlideBench, SliderEdit++ achieves state-of-the-art performance, improving the overall score by 18.5% relative to the strongest baseline. At the same time, using a few-step editing backbone makes our method approximately 3x to 20x faster than existing slider-based approaches, enabling substantially more responsive interactive editing.

Social simulations built from language-model agents need role-conditioned behavior that can be checked before agents are placed into a simulated population. We introduce an activation-steering screening workflow for role-conditioned agents: define a role profile, extract a role-specific direction, sweep four steering coefficients, evaluate role-profile alignment, and pass or flag each candidate configuration. On OLMo-3-7B-Instruct, we apply the workflow to a mixed 275-role inventory with 228 role-agnostic questions, GPT-4.1-mini prompted role references, and GPT-4.1-mini judges. Role-specific directions receive higher judged role-profile alignment than an assistant-axis directional control from prior persona-vector work, with mean overall scores of 63.2 versus 41.1 across the tested grid. They also preserve high lexical diversity, while the control drops sharply at larger coefficients. The role-level screen is the main practical output: most roles improve as steering increases, but 38 roles decline across all six measured dimensions, showing why simulation builders should choose coefficients per role rather than deploy a uniform high-strength setting. We make our code and evaluation artifacts available at https://anonymous.4open.science/r/anonymous-research-code-5F03/.

While decoupled control schemes for legged mobile manipulators have shown robustness, learning holistic whole-body control policies for tracking global end-effector poses remains fragile against Out-of-Distribution (OOD) inputs induced by sensor noise or infeasible user commands. To improve robustness against these perturbations without sacrificing task performance and continuity, we propose Competence Manifold Projection (CMP). Specifically, we utilize a Frame-Wise Safety Scheme that transforms the infinite-horizon safety constraint into a computationally efficient single-step manifold inclusion. To instantiate this competence manifold, we employ a Lower-Bounded Safety Estimator that distinguishes unmastered intentions from the training distribution. We then introduce an Isomorphic Latent Space (ILS) that aligns manifold geometry with safety probability, enabling efficient O(1) seamless defense against arbitrary OOD intents. Experiments demonstrate that CMP achieves up to a 10-fold survival rate improvement in typical OOD scenarios where baselines suffer catastrophic failure, incurring under 10% tracking degradation. Notably, the system exhibits emergent ``best-effort'' generalization behaviors to progressively accomplish OOD goals by adhering to the competence boundaries. Result videos are available at: https://shepherd1226.github.io/CMP.

Simulated humanoids are an appealing research domain due to their physical capabilities. Nonetheless, they are also challenging to control, as a policy must drive an unstable, discontinuous, and high-dimensional physical system. One widely studied approach is to utilize motion capture (MoCap) data to teach the humanoid agent low-level skills (e.g., standing, walking, and running) that can then be re-used to synthesize high-level behaviors. However, even with MoCap data, controlling simulated humanoids remains very hard, as MoCap data offers only kinematic information. Finding physical control inputs to realize the demonstrated motions requires computationally intensive methods like reinforcement learning. Thus, despite the publicly available MoCap data, its utility has been limited to institutions with large-scale compute. In this work, we dramatically lower the barrier for productive research on this topic by training and releasing high-quality agents that can track over three hours of MoCap data for a simulated humanoid in the dm_control physics-based environment. We release MoCapAct (Motion Capture with Actions), a dataset of these expert agents and their rollouts, which contain proprioceptive observations and actions. We demonstrate the utility of MoCapAct by using it to train a single hierarchical policy capable of tracking the entire MoCap dataset within dm_control and show the learned low-level component can be re-used to efficiently learn downstream high-level tasks. Finally, we use MoCapAct to train an autoregressive GPT model and show that it can control a simulated humanoid to perform natural motion completion given a motion prompt. Videos of the results and links to the code and dataset are available at https://microsoft.github.io/MoCapAct.

Large Language Models (LLMs) are increasingly deployed in socially sensitive domains, yet their unpredictable behaviors, ranging from misaligned intent to inconsistent personality, pose significant risks. We introduce SteerEval, a hierarchical benchmark for evaluating LLM controllability across three domains: language features, sentiment, and personality. Each domain is structured into three specification levels: L1 (what to express), L2 (how to express), and L3 (how to instantiate), connecting high-level behavioral intent to concrete textual output. Using SteerEval, we systematically evaluate contemporary steering methods, revealing that control often degrades at finer-grained levels. Our benchmark offers a principled and interpretable framework for safe and controllable LLM behavior, serving as a foundation for future research.

Aligning large language models (LLMs) with human preferences is essential for safe and useful LLMs. Previous works mainly adopt reinforcement learning (RLHF) and direct preference optimization (DPO) with human feedback for alignment. Nevertheless, they have certain drawbacks. One such limitation is that they can only align models with one preference at the training time (e.g., they cannot learn to generate concise responses when the preference data prefers detailed responses), or have certain constraints for the data format (e.g., DPO only supports pairwise preference data). To this end, prior works incorporate controllable generations for alignment to make language models learn multiple preferences and provide outputs with different preferences during inference if asked. Controllable generation also offers more flexibility with regard to data format (e.g., it supports pointwise preference data). Specifically, it uses different control tokens for different preferences during training and inference, making LLMs behave differently when required. Current controllable generation methods either use a special token or hand-crafted prompts as control tokens, and optimize them together with LLMs. As control tokens are typically much lighter than LLMs, this optimization strategy may not effectively optimize control tokens. To this end, we first use parameter-efficient tuning (e.g., prompting tuning and low-rank adaptation) to optimize control tokens and then fine-tune models for controllable generations, similar to prior works. Our approach, alignMEnt with parameter-Efficient Tuning (MEET), improves the quality of control tokens, thus improving controllable generation quality consistently by an apparent margin on two well-recognized datasets compared with prior works.

Text-to-image diffusion generative models can generate high quality images at the cost of tedious prompt engineering. Controllability can be improved by introducing layout conditioning, however existing methods lack layout editing ability and fine-grained control over object attributes. The concept of multi-layer generation holds great potential to address these limitations, however generating image instances concurrently to scene composition limits control over fine-grained object attributes, relative positioning in 3D space and scene manipulation abilities. In this work, we propose a novel multi-stage generation paradigm that is designed for fine-grained control, flexibility and interactivity. To ensure control over instance attributes, we devise a novel training paradigm to adapt a diffusion model to generate isolated scene components as RGBA images with transparency information. To build complex images, we employ these pre-generated instances and introduce a multi-layer composite generation process that smoothly assembles components in realistic scenes. Our experiments show that our RGBA diffusion model is capable of generating diverse and high quality instances with precise control over object attributes. Through multi-layer composition, we demonstrate that our approach allows to build and manipulate images from highly complex prompts with fine-grained control over object appearance and location, granting a higher degree of control than competing methods.

Controllable video generation remains challenging due to the difficulty of specifying precise multi-object interactions using text prompts or motion-control inputs that primarily constrain pixel movement. In practice, trajectory-based control often requires users to draw accurate tracks for multiple objects, which scales poorly with scene complexity and becomes ambiguous under occlusion or overlap. To enable flexible yet precise multi-subject control, we introduce GraphVid, a graph-conditioned image-to-video generation model that enables interactive control through structured interaction graphs. We further curate GraphVid-Bench, a large-scale interaction-centric video dataset with structured relational annotations to enable training of interaction-aware video generation models. Despite using substantially less training data and fewer trainable parameters than prior motion-control methods, GraphVid delivers strong controllability and video quality. Compared with Motion-I2V, GraphVid reduces FID by up to 39.9% and FVD by 37.6%, while improving PSNR (9.87=>15.98) and SSIM (0.38=>0.61). Our results highlight the potential of structured semantic interfaces as a powerful paradigm for controllable video generation.

We study the autonomous exploration (AX) problem proposed by Lim & Auer (2012). In this setting, the objective is to discover a set of epsilon-optimal policies reaching a set S_L^{rightarrow} of incrementally L-controllable states. We introduce a novel layered decomposition of the set of incrementally L-controllable states that is based on the iterative application of a state-expansion operator. We leverage these results to design Layered Autonomous Exploration (LAE), a novel algorithm for AX that attains a sample complexity of mathcal{O}(LS^{rightarrow}_{L(1+epsilon)}Gamma_{L(1+epsilon)} A ln^{12}(S^{rightarrow}_{L(1+epsilon)})/epsilon^2), where S^{rightarrow}_{L(1+epsilon)} is the number of states that are incrementally L(1+epsilon)-controllable, A is the number of actions, and Gamma_{L(1+epsilon)} is the branching factor of the transitions over such states. LAE improves over the algorithm of Tarbouriech et al. (2020a) by a factor of L^2 and it is the first algorithm for AX that works in a countably-infinite state space. Moreover, we show that, under a certain identifiability assumption, LAE achieves minimax-optimal sample complexity of mathcal{O}(LS^{rightarrow}_{L}Aln^{12}(S^{rightarrow}_{L})/epsilon^2), outperforming existing algorithms and matching for the first time the lower bound proved by Cai et al. (2022) up to logarithmic factors.

While large-scale diffusion models have revolutionized video synthesis, achieving precise control over both multi-subject identity and multi-granularity motion remains a significant challenge. Recent attempts to bridge this gap often suffer from limited motion granularity, control ambiguity, and identity degradation, leading to suboptimal performance on identity preservation and motion control. In this work, we present DreamVideo-Omni, a unified framework enabling harmonious multi-subject customization with omni-motion control via a progressive two-stage training paradigm. In the first stage, we integrate comprehensive control signals for joint training, encompassing subject appearances, global motion, local dynamics, and camera movements. To ensure robust and precise controllability, we introduce a condition-aware 3D rotary positional embedding to coordinate heterogeneous inputs and a hierarchical motion injection strategy to enhance global motion guidance. Furthermore, to resolve multi-subject ambiguity, we introduce group and role embeddings to explicitly anchor motion signals to specific identities, effectively disentangling complex scenes into independent controllable instances. In the second stage, to mitigate identity degradation, we design a latent identity reward feedback learning paradigm by training a latent identity reward model upon a pretrained video diffusion backbone. This provides motion-aware identity rewards in the latent space, prioritizing identity preservation aligned with human preferences. Supported by our curated large-scale dataset and the comprehensive DreamOmni Bench for multi-subject and omni-motion control evaluation, DreamVideo-Omni demonstrates superior performance in generating high-quality videos with precise controllability.

We study the exact controllability of the cubic nonlinear Schrödinger equation in the exterior Ω=R^nsetminusΘ of a non-trapping obstacle Θ, with internal controls supported outside a large ball, and the corresponding boundary control problem on Ω_0=B_{R_0}setminusΘ with Dirichlet controls acting only on the outer sphere partial B_{R_0}. Using the local smoothing effect of Burq, Gérard and Tzvetkov [9], we prove observability inequalities for the linear Schrödinger equation in the whole scale of Sobolev spaces H^σ_D(Ω), σin[-2,2], associated with the Dirichlet Laplacian; they require only the non-trapping assumption (no star-shapedness of Θ), and their proofs use no normal boundary traces. Combined with Strichartz-type estimates and a perturbation argument, this yields local exact controllability in H^1_0(Ω) and in H^2(Ω)cap H^1_0(Ω), in dimensions two and three, around the zero solution and, for internal controls and under a unique continuation assumption, around nontrivial trajectories. The same method applies to the quintic equation, which is energy-critical in dimension three. Several open problems are discussed.

Density of the reachable states can help understand the risk of safety-critical systems, especially in situations when worst-case reachability is too conservative. Recent work provides a data-driven approach to compute the density distribution of autonomous systems' forward reachable states online. In this paper, we study the use of such approach in combination with model predictive control for verifiable safe path planning under uncertainties. We first use the learned density distribution to compute the risk of collision online. If such risk exceeds the acceptable threshold, our method will plan for a new path around the previous trajectory, with the risk of collision below the threshold. Our method is well-suited to handle systems with uncertainties and complicated dynamics as our data-driven approach does not need an analytical form of the systems' dynamics and can estimate forward state density with an arbitrary initial distribution of uncertainties. We design two challenging scenarios (autonomous driving and hovercraft control) for safe motion planning in environments with obstacles under system uncertainties. We first show that our density estimation approach can reach a similar accuracy as the Monte-Carlo-based method while using only 0.01X training samples. By leveraging the estimated risk, our algorithm achieves the highest success rate in goal reaching when enforcing the safety rate above 0.99.

Aligned language models gate behaviors such as refusal and language routing through sparse feed forward neurons, yet no theory predicts when a single neuron intervention controls a behavior coherently rather than collapsing the output. We develop a budget normalized control window framework for single neuron steering. A dose along one write direction reduces to one control coordinate: the alignment between the residual stream and the write, driven along a universal saturation curve in units of a coherence budget set by the residual norm divided by the write norm. Coherent control exists when a behavior trigger lies below the collapse ceiling. The same coordinate governs benign mode switches and refusal; the ceiling follows from weights and one generic forward pass, while triggers are measured at rollout. On fifteen held out neurons, the predicted ceiling has mean absolute error 0.14, about 0.07 in bulk layers, and the committed open or closed verdict holds on eleven against a ten of fifteen majority baseline. Closed cases expose three failure modes rather than violations: collapse before trigger, too little depth to propagate, or a normalization that caps how far one neuron can push. The law explains why local gradient attribution anti predicts control: true controllers write off the readout axis and carry a near zero first order gradient. A forward only contrastive screen made precise by the window recovers controllers that attribution misses. On refusal, the hardest case, intervention success is typed, not scalar: coherent bypass and strict actionable reach separate, so a neuron can flip refusal in fluent, on task text with no actionable content, and genuine actionable reach appears only for three of six audited Llama pivots and only at later rollout horizons. Single neuron steering is therefore a budgeted, typed audit of controllability rather than a fixed dose anecdote.

Manipulation of facial images to meet specific controls such as pose, expression, and lighting, also known as face rigging, is a complex task in computer vision. Existing methods are limited by their reliance on image datasets, which necessitates individual-specific fine-tuning and limits their ability to retain fine-grained identity and semantic details, reducing practical usability. To overcome these limitations, we introduce ControlFace, a novel face rigging method conditioned on 3DMM renderings that enables flexible, high-fidelity control. We employ a dual-branch U-Nets: one, referred to as FaceNet, captures identity and fine details, while the other focuses on generation. To enhance control precision, the control mixer module encodes the correlated features between the target-aligned control and reference-aligned control, and a novel guidance method, reference control guidance, steers the generation process for better control adherence. By training on a facial video dataset, we fully utilize FaceNet's rich representations while ensuring control adherence. Extensive experiments demonstrate ControlFace's superior performance in identity preservation and control precision, highlighting its practicality. Please see the project website: https://cvlab-kaist.github.io/ControlFace/.

Steerability is a defining capability of generalist robot policies, yet remains largely absent in dexterous-hand systems for lack of large-scale, language-aligned, and action-accurate demonstration data. To address this bottleneck, we present a full-stack system that scales dexterous VLA pre-training from egocentric human videos and enables data-efficient real-robot post-training. It integrates EgoSmith, a data pipeline that curates in-the-wild egocentric videos into 9.6K hours of high-quality pre-training data with 9x higher throughput and better accuracy than prior SOTA; a unified robot stack for teleoperation and human-in-the-loop correction; and EgoSteer, a world-model-enhanced VLA trained on optimized infrastructure. Human-data pre-training equips EgoSteer with language-guided manipulation priors, which are grounded through robot post-training and improved by DAgger refinement. Empirically, EgoSteer robustly executes free-form instructions across 40+ diverse tasks, demonstrating failure recovery, dexterity, and generalization. The pre-trained model also few-shot adapts to complex long-horizon tasks, including box folding, on two embodiments with 75+% success. We open-source the system, data, and model at https://egosteer.github.io/.

Using offline datasets to evaluate conversational agents often fails to cover rare scenarios or to support testing new policies. This has motivated the use of controllable user simulators for targeted, counterfactual evaluation, typically implemented by prompting or fine-tuning large language models. In this work, we formalize controllable simulation as a causal inference problem. By bridging natural language evaluation with off-policy evaluation methodology, we show that the standard practice of training simulators via supervised fine-tuning on post-hoc trajectory labels yields a structurally biased model. Specifically, these labels are inextricably coupled to the data-generating behavior policy, injecting a look-ahead bias that breaks causal consistency. Furthermore, we prove that under policy shift this failure causes the variance of evaluation metrics to explode geometrically, a phenomenon we term controllability collapse. To restore causal consistency, we establish theoretical conditions for accurate simulation and propose practical training mitigations: a priori controls, step-wise dynamic controls, and direct policy-conditioned learning. Empirical evaluation confirms that while standard global controls distort conversational distributions and collapse behavioral diversity, our causally grounded simulators eliminate look-ahead bias, preserve natural variance, and exhibit robust zero-shot generalization to unseen agent behaviors.

An activation-steering coefficient sets intervention strength, but requesting a particular degree of persona expression requires a behavioral scale. We study persona dosing: controlling a language model through a trait description and a requested mean intensity. PersonaDose specializes a shared, description-conditioned FLAS controller on persona responses, then calibrates its flow time against measured trait expression. Training responses are not paired with requested target intensities. Across Llama-3.1-8B, Qwen3-8B, and Gemma-3-4B, PersonaDose raises core-trait expression at the Persona Vectors coherence floor of 75 by 33.2, 18.3, and 17.8 points over contrastive activation addition. Calibration-selected settings retain an expression advantage on held-out questions, although the coherence floor does not hold for every trait there. Across seven trained traits, calibrated requests yield mean targeting errors of 4.7-6.2 points over 14-22 calibration-reachable targets out of 28 per model. These results separate the behavioral range learned by a controller from the accuracy of requests within that range.

Motor control is a fundamental process that underlies all voluntary behavioral responses. Several different theories based on different principles (task dynamics, equilibrium-point theory, passive-motion paradigm, active inference, optimal control) account for specific aspects of how actions are produced, but fail to provide a unified view on this problem. Here we propose a concise theory of motor control based on three principles: optimal feedback control, control with a receding time horizon, and task representation by a series of via-points updated at fixed frequency. By construction, the theory provides a suitable solution to the degrees-of-freedom problem, i.e. trajectory formation in the presence of redundancies and noise. We show through computer simulations that the theory also explains the production of discrete, continuous, rhythmic and temporally-constrained movements, and their parametric and statistical properties (scaling laws, power laws, speed/accuracy tradeoffs). The theory has no free parameters and only limited variations in its implementation details and in the nature of noise are necessary to guarantee its explanatory power.

Recent advances in motion diffusion models have enabled spatially controllable text-to-motion generation. However, these models struggle to achieve high-precision control while maintaining high-quality motion generation. To address these challenges, we propose MaskControl, the first approach to introduce controllability to the generative masked motion model. Our approach introduces two key innovations. First, Logits Regularizer implicitly perturbs logits at training time to align the distribution of motion tokens with the controlled joint positions, while regularizing the categorical token prediction to ensure high-fidelity generation. Second, Logit Optimization explicitly optimizes the predicted logits during inference time, directly reshaping the token distribution that forces the generated motion to accurately align with the controlled joint positions. Moreover, we introduce Differentiable Expectation Sampling (DES) to combat the non-differential distribution sampling process encountered by logits regularizer and optimization. Extensive experiments demonstrate that MaskControl outperforms state-of-the-art methods, achieving superior motion quality (FID decreases by ~77\%) and higher control precision (average error 0.91 vs. 1.08). Additionally, MaskControl enables diverse applications, including any-joint-any-frame control, body-part timeline control, and zero-shot objective control. Video visualization can be found at https://www.ekkasit.com/ControlMM-page/

Vision-Language-Action (VLA) models have achieved high task success rates on robot manipulation task benchmarks. More recently, there has been an emphasis on evaluating the robustness of VLA models to perturbations. However, this robustness is still predominantly measured through Task Success Rate (TSR). In this work, we propose a benchmark-agnostic evaluation framework to measure the behavioural robustness of models by characterising how successful trajectories are executed under perturbation. We implement this methodology by extending the widely-used LIBERO and LIBERO-Plus benchmarks. Across three state-of-the-art VLA models, four LIBERO task suites and seven perturbation conditions, we evaluate changes in both typical successful behaviour and its variability, including metrics of motion smoothness, efficiency and gripper behaviour. We find that perturbations can alter the behaviour of successful trajectories, a phenomenon which cannot necessarily be inferred from TSR alone. Across LIBERO suites, we identify cases where state-of-the-art VLA models achieve comparable TSR under the same perturbation condition, yet behaviour on successful trajectories diverges substantially. Therefore, to have a more robust assessment of task performance, we argue that suitable measures of robustness should capture not only whether a task is completed, but also how the robot behaves while completing it. When evaluating the robustness of VLA models, TSR may be complemented by behavioural evaluation metrics that characterise the nature and variability of successful task execution by robots.

Large language models (LLMs) have gained significant traction across a wide range of fields in recent years. There is also a growing expectation for them to display human-like personalities during interactions. To meet this expectation, numerous studies have proposed methods for modelling LLM personalities through psychometric evaluations. However, most existing models face two major limitations: they rely on the Big Five (OCEAN) framework, which only provides coarse personality dimensions, and they lack mechanisms for controlling trait intensity. In this paper, we address this gap by extending the Machine Personality Inventory (MPI), which originally used the Big Five model, to incorporate the 16 Personality Factor (16PF) model, allowing expressive control over sixteen distinct traits. We also developed a structured framework known as Specific Attribute Control (SAC) for evaluating and dynamically inducing trait intensity in LLMs. Our method introduces adjective-based semantic anchoring to guide trait intensity expression and leverages behavioural questions across five intensity factors: Frequency, Depth, Threshold, Effort, and Willingness. Through experimentation, we find that modelling intensity as a continuous spectrum yields substantially more consistent and controllable personality expression compared to binary trait toggling. Moreover, we observe that changes in target trait intensity systematically influence closely related traits in psychologically coherent directions, suggesting that LLMs internalize multi-dimensional personality structures rather than treating traits in isolation. Our work opens new pathways for controlled and nuanced human-machine interactions in domains such as healthcare, education, and interviewing processes, bringing us one step closer to truly human-like social machines.

This paper addresses the problem of averaged controllability for the time-fractional Schrodinger equation, where the quantum diffusivity parameter is a random variable with a general probability distribution. First, by exploiting the analyticity of the Mittag-Leffler function and Muntz's theorem, we show that the simultaneous null controllability of the system can occur only for a countable set of realizations of the random diffusivity. In particular, this implies the impossibility of simultaneous null controllability for absolutely continuous random diffusivity. Next, we prove the lack of exact averaged controllability for absolutely continuous random variables, irrespective of the control time. Furthermore, we introduce a new two-parameter fractional characteristic function, which allows us to construct a class of random variables satisfying null averaged controllability at any time from any arbitrary sensor set of positive Lebesgue measure. This is achieved using an open-loop control belonging to L^\infty and independent of the random parameter. In particular, we obtain the null controllability of the fractional biharmonic diffusion equation. Finally, we conclude with several remarks and open problems that merit future investigation.

Video generation technologies are developing rapidly and have broad potential applications. Among these technologies, camera control is crucial for generating professional-quality videos that accurately meet user expectations. However, existing camera control methods still suffer from several limitations, including control precision and the neglect of the control for subject motion dynamics. In this work, we propose I2VControl-Camera, a novel camera control method that significantly enhances controllability while providing adjustability over the strength of subject motion. To improve control precision, we employ point trajectory in the camera coordinate system instead of only extrinsic matrix information as our control signal. To accurately control and adjust the strength of subject motion, we explicitly model the higher-order components of the video trajectory expansion, not merely the linear terms, and design an operator that effectively represents the motion strength. We use an adapter architecture that is independent of the base model structure. Experiments on static and dynamic scenes show that our framework outperformances previous methods both quantitatively and qualitatively. The project page is: https://wanquanf.github.io/I2VControlCamera .

Learning-rate steps are usually treated as hyperparameters. This paper isolates a local beliefspace calculation: when an update is modeled as a projected forward step on the probability simplex, admissibility means contractivity in the natural KL/Bregman geometry. Under this model, the upper bound of an admissible step is not a tuning slogan but a formula.

In this paper, we explore the capabilities of state-of-the-art large language models (LLMs) such as GPT-4, Claude 3 Opus, and Gemini 1.0 Ultra in solving undergraduate-level control problems. Controls provides an interesting case study for LLM reasoning due to its combination of mathematical theory and engineering design. We introduce ControlBench, a benchmark dataset tailored to reflect the breadth, depth, and complexity of classical control design. We use this dataset to study and evaluate the problem-solving abilities of these LLMs in the context of control engineering. We present evaluations conducted by a panel of human experts, providing insights into the accuracy, reasoning, and explanatory prowess of LLMs in control engineering. Our analysis reveals the strengths and limitations of each LLM in the context of classical control, and our results imply that Claude 3 Opus has become the state-of-the-art LLM for solving undergraduate control problems. Our study serves as an initial step towards the broader goal of employing artificial general intelligence in control engineering.

Controllable layout generation refers to the process of creating a plausible visual arrangement of elements within a graphic design (e.g., document and web designs) with constraints representing design intentions. Although recent diffusion-based models have achieved state-of-the-art FID scores, they tend to exhibit more pronounced misalignment compared to earlier transformer-based models. In this work, we propose the LAyout Constraint diffusion modEl (LACE), a unified model to handle a broad range of layout generation tasks, such as arranging elements with specified attributes and refining or completing a coarse layout design. The model is based on continuous diffusion models. Compared with existing methods that use discrete diffusion models, continuous state-space design can enable the incorporation of differentiable aesthetic constraint functions in training. For conditional generation, we introduce conditions via masked input. Extensive experiment results show that LACE produces high-quality layouts and outperforms existing state-of-the-art baselines.

A central puzzle for the behavioural sciences and for human-facing artificial intelligence is the persistence of within-person variability. The same individual, presented with the same observable input, produces different outcomes on different occasions, and different individuals produce divergent outcomes that no observable covariate fully predicts. We argue that this variability belongs in the dynamic latent state of the person, and that human outcomes are controllable in a precise and operational sense through interventions that target the state and its weighting at the moment a decision is being formed. We define a state as the time-indexed weighting vector over the dimensions that govern how an individual's biology, physiology, and neuropsychology process the next event into a decision and an outcome. The relationship between state, decision, and outcome is causal rather than correlational. The weighting vector is dynamic at sub-daily timescales. The conscious channel through which outcomes are reportable is a narrow attentional bottleneck whose contents are themselves state-dependent. Taken together, these claims imply that the outcome of a given event is controllable, conditionally, on the state-trajectory at the time of intervention. We motivate the framework with six strands of established evidence (causal inference, predictive processing, allostasis, attentional bottleneck, chronobiology, computational psychiatry) and a 24-month observational base from a deployed behavioural platform spanning more than 200,000 consented users across four occupational personas (research period 2023 to 2026). We derive seven testable predictions, list six operational requirements for state-aware systems, and discuss implications for digital health, education, AI personalisation, and personal agency.

Agentic systems involved in high-stake decision-making under adversarial pressure need formal guarantees not offered by existing approaches. Motivated by the operational needs of security operations centers (SOCs) that must configure endpoint detection and response (EDR) policies under adversarial pressure, we present a tool-mediated architecture: LLM agents use deterministic tools (Stackelberg best-response, Bayesian observer updates, attack-graph primitives) and select from finite action catalogs enforced at the tool-output interface. A composite Lyapunov function machine-checked in Lean 4 with zero sorry certifies controllability, observability from asymmetric sensor data, and Input-to-State Stability (ISS) robustness under intelligent adversarial disturbance, with two corollaries extending the certificate to any controller or adversary from the catalogs. On 282 real enterprise attack graphs, the claims hold with margin. On paired offensive/defensive telemetry, a tool-mediated Claude Sonnet 4 controller reduces the attacker's expected payoff (game value) by 59% relative to a deterministic greedy baseline, with zero variance across 40 runs at four temperatures. A Claude Haiku 4.5 controller converges to suboptimal game values but stays catalog-bounded over an additional 40 runs, demonstrating that architectural stability is not dependent on the controller capability. The LLM agent's non-determinism furthers creative exploration of strategies, while the tool-mediated architecture ensures system stability.

Controllable image synthesis, which enables fine-grained control over generated outputs, has emerged as a key focus in visual generative modeling. However, controllable generation remains challenging for Visual Autoregressive (VAR) models due to their hierarchical, next-scale prediction style. Existing VAR-based methods often suffer from inefficient control encoding and disruptive injection mechanisms that compromise both fidelity and efficiency. In this work, we present SCALAR, a controllable generation method based on VAR, incorporating a novel Scale-wise Conditional Decoding mechanism. SCALAR leverages a pretrained image encoder to extract semantic control signal encodings, which are projected into scale-specific representations and injected into the corresponding layers of the VAR backbone. This design provides persistent and structurally aligned guidance throughout the generation process. Building on SCALAR, we develop SCALAR-Uni, a unified extension that aligns multiple control modalities into a shared latent space, supporting flexible multi-conditional guidance in a single model. Extensive experiments show that SCALAR achieves superior generation quality and control precision across various tasks.

Safe yet stable grasping requires a robotic hand to apply sufficient force on the object to immobilize it while keeping it from getting damaged. Soft robotic hands have been proposed for safe grasping due to their passive compliance, but even such a hand can crush objects if the applied force is too high. Thus for safe grasping, regulating the grasping force is of uttermost importance even with soft hands. In this work, we present a force controlled soft hand and use it to achieve safe grasping. To this end, resistive force and bend sensors are integrated in a soft hand, and a data-driven calibration method is proposed to estimate contact interaction forces. Given the force readings, the pneumatic pressures are regulated using a proportional-integral controller to achieve desired force. The controller is experimentally evaluated and benchmarked by grasping easily deformable objects such as plastic and paper cups without neither dropping nor deforming them. Together, the results demonstrate that our force controlled soft hand can grasp deformable objects in a safe yet stable manner.

The field of Text-to-Speech has experienced huge improvements last years benefiting from deep learning techniques. Producing realistic speech becomes possible now. As a consequence, the research on the control of the expressiveness, allowing to generate speech in different styles or manners, has attracted increasing attention lately. Systems able to control style have been developed and show impressive results. However the control parameters often consist of latent variables and remain complex to interpret. In this paper, we analyze and compare different latent spaces and obtain an interpretation of their influence on expressive speech. This will enable the possibility to build controllable speech synthesis systems with an understandable behaviour.

Current benchmarks for Large Language Models (LLMs) primarily focus on performance metrics, often failing to capture the nuanced behavioral characteristics that differentiate them. This paper introduces a novel ``Behavioral Fingerprinting'' framework designed to move beyond traditional evaluation by creating a multi-faceted profile of a model's intrinsic cognitive and interactive styles. Using a curated Diagnostic Prompt Suite and an innovative, automated evaluation pipeline where a powerful LLM acts as an impartial judge, we analyze eighteen models across capability tiers. Our results reveal a critical divergence in the LLM landscape: while core capabilities like abstract and causal reasoning are converging among top models, alignment-related behaviors such as sycophancy and semantic robustness vary dramatically. We further document a cross-model default persona clustering (ISTJ/ESTJ) that likely reflects common alignment incentives. Taken together, this suggests that a model's interactive nature is not an emergent property of its scale or reasoning power, but a direct consequence of specific, and highly variable, developer alignment strategies. Our framework provides a reproducible and scalable methodology for uncovering these deep behavioral differences. Project: https://github.com/JarvisPei/Behavioral-Fingerprinting

We examine how closely pretrained LeWorldModel (LeWM) reproduces the effects of small action changes. Using matched simulator and model responses, we measure action sensitivity with Gram matrices at three perturbation scales. Across nearly a thousand states from Reacher and OGBench Cube, the most sensitive action directions differ by median angles of about 36^circ and 42^circ, respectively, at the smallest scale. Increasing the perturbation tenfold reduces median normalized Gram discrepancy by roughly 70\% on Reacher and 47\% on Cube. Geometry measured in pixels and embeddings varies more across scales than the chosen physical-state geometry. On held-out directions, environment Grams achieve median embedding response errors of 17\% and 28\%, compared with 26\% and 38\% for an isotropic reference with the same trace. LeWM's errors are higher at this scale. These findings support scale-specific evaluation of action sensitivity; its effect on control remains an open question.

Large language models (LLMs) have led to a series of breakthroughs in natural language processing (NLP), owing to their excellent understanding and generation abilities. Remarkably, what further sets these models apart is the massive amounts of world knowledge they internalize during pretraining. While many downstream applications provide the model with an informational context to aid its performance on the underlying task, how the model's world knowledge interacts with the factual information presented in the context remains under explored. As a desirable behavior, an LLM should give precedence to the context whenever it contains task-relevant information that conflicts with the model's memorized knowledge. This enables model predictions to be grounded in the context, which can then be used to update or correct specific model predictions without frequent retraining. By contrast, when the context is irrelevant to the task, the model should ignore it and fall back on its internal knowledge. In this paper, we undertake a first joint study of the aforementioned two properties, namely controllability and robustness, in the context of LLMs. We demonstrate that state-of-the-art T5 and PaLM (both pretrained and finetuned) could exhibit poor controllability and robustness, which do not scale with increasing model size. As a solution, we propose a novel method - Knowledge Aware FineTuning (KAFT) - to strengthen both controllability and robustness by incorporating counterfactual and irrelevant contexts to standard supervised datasets. Our comprehensive evaluation showcases the utility of KAFT across model architectures and sizes.

We study test-time evolution for humanoid loco-manipulation: solving tasks that a controller was never trained for by repurposing its existing skills, improving from its own attempts, and retaining what it learns, without retraining. Our key insight is that a broad controller already holds much of the competence a new task needs, and that this competence becomes accessible through an interface between planning and control that is expressive enough to specify contact-rich, multi-stage interactions, yet executable and measurable enough that execution feedback can guide planning from experience. InterEvolve realizes this interface with two components. First, we develop an object-aware forward-backward (FB) behavioral foundation model, whose object residuals on a frozen body prior turn a new reward about the body or objects into loco-manipulation behavior at test time. Second, we specify tasks as reward programs: staged rewards with completion conditions and tunable constants. A large language model (LLM) agent revises the program structure in context, drawing on execution feedback and a skill library of verified programs, while a numerical optimizer tunes its constants. With every candidate verified across parallel simulation scenarios, the program explores new ways to induce, repurpose, and compose the controller's existing motor competence for the task at hand, and thus improves over iterations. Experiments show that human-designed rewards leave much of the FB model's loco-manipulation competence untapped, whereas the programs InterEvolve evolves release it, sometimes through novel strategies. It further produces behaviors for diverse tasks, complex scenes, and long-horizon compositions in simulation, and evolved skills run autonomously on a physical Unitree G1 from egocentric onboard perception.

Recently, there is a growing interest in creating computer-aided design (CAD) models based on user intent, known as controllable CAD generation. Existing work offers limited controllability and needs separate models for different types of control, reducing efficiency and practicality. To achieve controllable generation across all CAD construction hierarchies, such as sketch-extrusion, extrusion, sketch, face, loop and curve, we propose FlexCAD, a unified model by fine-tuning large language models (LLMs). First, to enhance comprehension by LLMs, we represent a CAD model as a structured text by abstracting each hierarchy as a sequence of text tokens. Second, to address various controllable generation tasks in a unified model, we introduce a hierarchy-aware masking strategy. Specifically, during training, we mask a hierarchy-aware field in the CAD text with a mask token. This field, composed of a sequence of tokens, can be set flexibly to represent various hierarchies. Subsequently, we ask LLMs to predict this masked field. During inference, the user intent is converted into a CAD text with a mask token replacing the part the user wants to modify, which is then fed into FlexCAD to generate new CAD models. Comprehensive experiments on public dataset demonstrate the effectiveness of FlexCAD in both generation quality and controllability. Code will be available at https://github.com/microsoft/FlexCAD.

Synthesizing hand motion that matches the full body motion and the semantic labels is a difficult task due to their high degrees of freedom and the lack of semantic labels. To cope with this issue, we propose a prior-first, condition-second framework for body-conditioned hand motion completion. Our framework first learns a generic body-hand kinematic prior from large-scale unstructured and unlabeled motion data, capturing the intrinsic coordination between global body dynamics and hand articulation. Semantic control is then introduced through lightweight adaptation on top of the frozen prior, avoiding the need to relearn kinematic structure for each control interface. Our framework centers on a streaming, autoregressive body-hand prior that generates coherent, kinematically consistent hand motion from body dynamics in real time, using structured kinematic modeling to maintain mechanical body-hand coupling. To enable practical controllability under limited supervision, we introduce semantically-layered adapters that inject conditioning signals at appropriate kinematic levels, supporting both self-supervised attribute control and weakly supervised text-driven control with only a few hours of labeled data. Extensive evaluations demonstrate that our framework improves kinematic plausibility, robustness, and controllability compared to end-to-end conditioned baselines, particularly in low-resource and cross-dataset settings. We further showcase real-time inference and an interactive authoring workflow, highlighting the applicability to production animation pipelines. Homepage: https://AIGAnimation.github.io/HandPrior/

Position controllers have become the dominant interface for executing learned manipulation policies. Yet a critical design decision remains understudied: how should we choose controller gains for policy learning? The conventional wisdom is to select gains based on desired task compliance or stiffness. However, this logic breaks down when controllers are paired with state-conditioned policies: effective stiffness emerges from the interplay between learned reactions and control dynamics, not from gains alone. We argue that gain selection should instead be guided by learnability: how amenable different gain settings are to the learning algorithm in use. In this work, we systematically investigate how position controller gains affect three core components of modern robot learning pipelines: behavior cloning, reinforcement learning from scratch, and sim-to-real transfer. Through extensive experiments across multiple tasks and robot embodiments, we find that: (1) behavior cloning benefits from compliant and overdamped gain regimes, (2) reinforcement learning can succeed across all gain regimes given compatible hyperparameter tuning, and (3) sim-to-real transfer is harmed by stiff and overdamped gain regimes. These findings reveal that optimal gain selection depends not on the desired task behavior, but on the learning paradigm employed. Project website: https://younghyopark.me/tune-to-learn

Ensuring safety is of paramount importance in physical human-robot interaction applications. This requires both adherence to safety constraints defined on the system state, as well as guaranteeing compliant behavior of the robot. If the underlying dynamical system is known exactly, the former can be addressed with the help of control barrier functions. The incorporation of elastic actuators in the robot's mechanical design can address the latter requirement. However, this elasticity can increase the complexity of the resulting system, leading to unmodeled dynamics, such that control barrier functions cannot directly ensure safety. In this paper, we mitigate this issue by learning the unknown dynamics using Gaussian process regression. By employing the model in a feedback linearizing control law, the safety conditions resulting from control barrier functions can be robustified to take into account model errors, while remaining feasible. In order to enforce them on-line, we formulate the derived safety conditions in the form of a second-order cone program. We demonstrate our proposed approach with simulations on a two-degree-of-freedom planar robot with elastic joints.

Text-to-video generation has shown promising results. However, by taking only natural languages as input, users often face difficulties in providing detailed information to precisely control the model's output. In this work, we propose fine-grained controllable video generation (FACTOR) to achieve detailed control. Specifically, FACTOR aims to control objects' appearances and context, including their location and category, in conjunction with the text prompt. To achieve detailed control, we propose a unified framework to jointly inject control signals into the existing text-to-video model. Our model consists of a joint encoder and adaptive cross-attention layers. By optimizing the encoder and the inserted layer, we adapt the model to generate videos that are aligned with both text prompts and fine-grained control. Compared to existing methods relying on dense control signals such as edge maps, we provide a more intuitive and user-friendly interface to allow object-level fine-grained control. Our method achieves controllability of object appearances without finetuning, which reduces the per-subject optimization efforts for the users. Extensive experiments on standard benchmark datasets and user-provided inputs validate that our model obtains a 70% improvement in controllability metrics over competitive baselines.

Existing approaches to controllable generation typically rely on fine-tuning, auxiliary networks, or test-time search. We show that flow matching admits a different control interface: adaptation through examples. For deterministic interpolants, the velocity field is solely governed by a conditional endpoint mean; shifting this mean shifts the flow itself. This yields a simple principle for controllable generation: steer a pretrained model by changing the reference set it follows. We instantiate this idea in two forms. Reference-Mean Guidance is training-free: it computes a closed-form endpoint-mean correction from a reference bank and applies it to a frozen FLUX.2-klein (4B) model, enabling control of color, identity, style, and structure while keeping the prompt, seed, and weights fixed. Semi-Parametric Guidance amortizes the same idea through an explicit mean anchor and learned residual refiner, matching unconditional DiT-B/4 quality on AFHQv2 while allowing the reference set to be swapped at inference time. These results point to a broader direction: generative models that adapt through data, not parameter updates.

This work introduces MotionLCM, extending controllable motion generation to a real-time level. Existing methods for spatial control in text-conditioned motion generation suffer from significant runtime inefficiency. To address this issue, we first propose the motion latent consistency model (MotionLCM) for motion generation, building upon the latent diffusion model (MLD). By employing one-step (or few-step) inference, we further improve the runtime efficiency of the motion latent diffusion model for motion generation. To ensure effective controllability, we incorporate a motion ControlNet within the latent space of MotionLCM and enable explicit control signals (e.g., pelvis trajectory) in the vanilla motion space to control the generation process directly, similar to controlling other latent-free diffusion models for motion generation. By employing these techniques, our approach can generate human motions with text and control signals in real-time. Experimental results demonstrate the remarkable generation and controlling capabilities of MotionLCM while maintaining real-time runtime efficiency.

The pursuit of controllability as a higher standard of visual content creation has yielded remarkable progress in customizable image synthesis. However, achieving controllable video synthesis remains challenging due to the large variation of temporal dynamics and the requirement of cross-frame temporal consistency. Based on the paradigm of compositional generation, this work presents VideoComposer that allows users to flexibly compose a video with textual conditions, spatial conditions, and more importantly temporal conditions. Specifically, considering the characteristic of video data, we introduce the motion vector from compressed videos as an explicit control signal to provide guidance regarding temporal dynamics. In addition, we develop a Spatio-Temporal Condition encoder (STC-encoder) that serves as a unified interface to effectively incorporate the spatial and temporal relations of sequential inputs, with which the model could make better use of temporal conditions and hence achieve higher inter-frame consistency. Extensive experimental results suggest that VideoComposer is able to control the spatial and temporal patterns simultaneously within a synthesized video in various forms, such as text description, sketch sequence, reference video, or even simply hand-crafted motions. The code and models will be publicly available at https://videocomposer.github.io.

Achieving both realism and controllability in interactive closed-loop traffic simulation remains a key challenge in autonomous driving. Data-driven simulation methods reproduce realistic trajectories but suffer from covariate shift in closed-loop deployment, compounded by simplified dynamics models that further reduce reliability. Conversely, physics-based simulation methods enhance reliable and controllable closed-loop interactions but often lack expert demonstrations, compromising realism. To address these challenges, we introduce a dual-stage AV-centered simulation framework that conducts open-loop imitation learning pre-training in a data-driven simulator to capture trajectory-level realism and multimodality, followed by closed-loop reinforcement learning fine-tuning in a physics-based simulator to enhance controllability and mitigate covariate shift. In the fine-tuning stage, we propose RIFT, a simple yet effective closed-loop RL fine-tuning strategy that preserves the trajectory-level multimodality through a GRPO-style group-relative advantage formulation, while enhancing controllability and training stability by replacing KL regularization with the dual-clip mechanism. Extensive experiments demonstrate that RIFT significantly improves the realism and controllability of generated traffic scenarios, providing a robust platform for evaluating autonomous vehicle performance in diverse and interactive scenarios.

We present MotionPersona, a novel real-time character controller that allows users to characterize a character by specifying attributes such as physical traits, mental states, and demographics, and projects these properties into the generated motions for animating the character. In contrast to existing deep learning-based controllers, which typically produce homogeneous animations tailored to a single, predefined character, MotionPersona accounts for the impact of various traits on human motion as observed in the real world. To achieve this, we develop a block autoregressive motion diffusion model conditioned on SMPLX parameters, textual prompts, and user-defined locomotion control signals. We also curate a comprehensive dataset featuring a wide range of locomotion types and actor traits to enable the training of this characteristic-aware controller. Unlike prior work, MotionPersona is the first method capable of generating motion that faithfully reflects user-specified characteristics (e.g., an elderly person's shuffling gait) while responding in real time to dynamic control inputs. Additionally, we introduce a few-shot characterization technique as a complementary conditioning mechanism, enabling customization via short motion clips when language prompts fall short. Through extensive experiments, we demonstrate that MotionPersona outperforms existing methods in characteristics-aware locomotion control, achieving superior motion quality and diversity. Results, code, and demo can be found at: https://motionpersona25.github.io/.

We investigate optimal control problems governed by the elliptic partial differential equation -Delta u=f subject to Dirichlet boundary conditions on a given domain Omega. The control variable in this setting is the right-hand side f, and the objective is to minimize a cost functional that depends simultaneously on the control f and on the associated state function u. We establish the existence of optimal controls and analyze their qualitative properties by deriving necessary conditions for optimality. In particular, when pointwise constraints of the form alphale flebeta are imposed a priori on the control, we examine situations where a {\it bang-bang} phenomenon arises, that is where the optimal control f assumes only the extremal values alpha and beta. More precisely, the control takes the form f=alpha1_E+beta1_{Omegasetminus E}, thereby placing the problem within the framework of shape optimization. Under suitable assumptions, we further establish certain regularity properties for the optimal sets E. Finally, in the last part of the paper, we present numerical simulations that illustrate our theoretical findings through a selection of representative examples.

Diffusion models have emerged as powerful tools for generative tasks, producing high-quality outputs across diverse domains. However, how the generated data responds to the initial noise perturbation in diffusion models remains under-explored, which hinders understanding the controllability of the sampling process. In this work, we first observe an interesting phenomenon: the relationship between the change of generation outputs and the scale of initial noise perturbation is highly linear through the diffusion ODE sampling. Then we provide both theoretical and empirical study to justify this linearity property of this input-output (noise-generation data) relationship. Inspired by these new insights, we propose a novel Controllable and Constrained Sampling method (CCS) together with a new controller algorithm for diffusion models to sample with desired statistical properties while preserving good sample quality. We perform extensive experiments to compare our proposed sampling approach with other methods on both sampling controllability and sampled data quality. Results show that our CCS method achieves more precisely controlled sampling while maintaining superior sample quality and diversity.

In behavioral cloning (BC), policy performance is fundamentally limited by demonstration data quality. Real-world datasets contain trajectories of varying quality due to operator skill differences, teleoperation artifacts, and procedural inconsistencies, yet standard BC treats all demonstrations equally. Existing curation methods require costly policy training in the loop or manual annotation, limiting scalability. We propose RINSE (Ranking and INdexing Smooth Examples), a lightweight framework for scoring demonstrations based on trajectory smoothness that is policy-architecture-agnostic and operates on trajectory data alone, with TED additionally using a phase-boundary/contact signal. Grounded in motor control theory, which establishes smoothness as a hallmark of skilled movement, RINSE uses two complementary metrics: Spectral Arc Length (SAL), a spectral measure of frequency-domain regularity, and Trajectory-Envelope Distance (TED), a spatial measure of contact-aware geometric deviation. We show that smoothness filtering can reduce the conditional action variance of the retained data distribution, with downstream effects that can be amplified by action chunking and compounding error. On RoboMimic benchmarks, SAL filtering achieves 16% higher success using one-sixth of the data. On real-world manipulation, TED filtering achieves 20% improvement with half the data. As a retrieval-stage filter within STRAP on LIBERO-10, RINSE re-ranking improves mean success by 5.6%. As soft weights in Re-Mix domain reweighting, RINSE scores produce domain allocations highly correlated with the learned Re-Mix allocations (Spearman ρgeq 0.89). These results support smoothness as a useful quality signal across filtering, retrieval, and reweighting settings, especially in noisy or heterogeneous data regimes.

It is well-known that inverse dynamics models can improve tracking performance in robot control. These models need to precisely capture the robot dynamics, which consist of well-understood components, e.g., rigid body dynamics, and effects that remain challenging to capture, e.g., stick-slip friction and mechanical flexibilities. Such effects exhibit hysteresis and partial observability, rendering them, particularly challenging to model. Hence, hybrid models, which combine a physical prior with data-driven approaches are especially well-suited in this setting. We present a novel hybrid model formulation that enables us to identify fully physically consistent inertial parameters of a rigid body dynamics model which is paired with a recurrent neural network architecture, allowing us to capture unmodeled partially observable effects using the network memory. We compare our approach against state-of-the-art inverse dynamics models on a 7 degree of freedom manipulator. Using data sets obtained through an optimal experiment design approach, we study the accuracy of offline torque prediction and generalization capabilities of joint learning methods. In control experiments on the real system, we evaluate the model as a feed-forward term for impedance control and show the feedback gains can be drastically reduced to achieve a given tracking accuracy.

Supervised open-loop training has been widely adopted for training traffic simulation models; however, it fails to capture the inherently dynamic, multi-agent interactions common in complex driving scenarios. We introduce RLFTSim, a reinforcement-learning-based fine-tuning framework that enhances scenario realism by aligning simulator rollouts with real-world data distributions and provides a method for distilling goal-conditioned controllability in scenario generation. We instantiate RLFTSim on top of a pre-trained simulation model, design a reward that balances fidelity and controllability, and perform comprehensive experiments on the Waymo Open Motion Dataset. Our results show improvements in realism, achieving state-of-the-art performance. Compared with other heuristic search-based fine-tuning methods, RLFTSim requires significantly fewer samples due to a proposed low-variance and dense reward signal, and it directly addresses the realism alignment issue by design. We also demonstrate the effectiveness of our approach for distilling traffic simulation controllability through goal conditioning. The project page is available at https://ehsan-ami.github.io/rlftsim.

Controllable human image animation aims to generate videos from reference images using driving videos. Due to the limited control signals provided by sparse guidance (e.g., skeleton pose), recent works have attempted to introduce additional dense conditions (e.g., depth map) to ensure motion alignment. However, such strict dense guidance impairs the quality of the generated video when the body shape of the reference character differs significantly from that of the driving video. In this paper, we present DisPose to mine more generalizable and effective control signals without additional dense input, which disentangles the sparse skeleton pose in human image animation into motion field guidance and keypoint correspondence. Specifically, we generate a dense motion field from a sparse motion field and the reference image, which provides region-level dense guidance while maintaining the generalization of the sparse pose control. We also extract diffusion features corresponding to pose keypoints from the reference image, and then these point features are transferred to the target pose to provide distinct identity information. To seamlessly integrate into existing models, we propose a plug-and-play hybrid ControlNet that improves the quality and consistency of generated videos while freezing the existing model parameters. Extensive qualitative and quantitative experiments demonstrate the superiority of DisPose compared to current methods. Code: https://github.com/lihxxx/DisPose{https://github.com/lihxxx/DisPose}.

Large Vision-Language Models produce fluent image descriptions but offer limited semantic control: users cannot reliably specify whether captions should emphasize attributes, relations, or particular image regions. We present Fine-grained Captioning Control Using Scene Rewards (FoCUS), a controllable image captioning method that lets users steer captions toward specific semantic emphases through natural-language control prompts. The core idea is a prompt-conditioned control objective based on scene-graph-aligned component scores. Generated captions are parsed and aligned to scene-graph components such as objects, attributes, and relations. These components are differentially weighted, including negative weights, according to the requested emphasis. We optimize this objective with GRPO and further improve its reliability through a stricter object validity threshold and reasoning-based verification for attribute and relation scoring. To evaluate controllability, we introduce Semantic Control and Precision Evaluation (SCoPE), a benchmark with contrastive Include/Avoid constraints for measuring both target content coverage and out-of-scope suppression. Experiments on two VLM backbones show that FoCUS consistently improves controllability and fine-grained caption quality without degrading general caption performance.

Much has been said about observability in system theory and control; however, it has been recently that observability in complex networks has seriously attracted the attention of researchers. This paper examines the state-of-the-art and discusses some issues raised due to "complexity" and "stochasticity". These unresolved issues call for a new practical methodology. For stochastic systems, a degree of observability may be defined and the observability problem is not a binary (i.e., yes-no) question anymore. Here, we propose to employ a goal-seeking system to play a supervisory role in the network. Hence, improving the degree of observability would be a valid objective for the supervisory system. Towards this goal, the supervisor dynamically optimizes the observation process by reconfiguring the sensory parts in the network. A cognitive dynamic system is suggested as a proper choice for the supervisory system. In this framework, the network itself is viewed as the environment with which the cognitive dynamic system interacts. Computer experiments confirm the potential of the proposed approach for addressing some of the issues raised in networks due to complexity and stochasticity.

Photography is the art of painting with light, yet nighttime scenes are shaped by competing degradations: intense flares obscure scene structure, while photon-limited regions collapse into noise. Conventional approaches address these factors in isolation, overlooking the fact that these degradations are fundamentally entangled. To bridge this gap, we introduce LUCID, a unified framework that reframes nighttime restoration as a continuous and controllable process rather than a fixed correction. We decompose nighttime restoration into two cooperative components: a flare disentanglement module that lifts the 'curtain' of optical artifacts to provide reliable structural guidance, and a diffusion-driven module that leverages generative priors to reconstruct clean and well-exposed imagery. Crucially, LUCID introduces explicit controllability through a novel four-mode training strategy, enabling users to steer the restoration process via classifier-free guidance (CFG) and allowing selective control over light sources and their associated flare and ghosting artifacts, while also supporting high dynamic range (HDR) reconstruction through continuous exposure control. Extensive experiments demonstrate that LUCID consistently outperforms state-of-the-art methods across diverse real-world nighttime scenarios.

While generative video models have achieved remarkable fidelity and consistency, applying these capabilities to video editing remains a complex challenge. Recent research has explored motion controllability as a means to enhance text-to-video generation or image animation; however, we identify precise motion control as a promising yet under-explored paradigm for editing existing videos. In this work, we propose modifying video motion by directly editing sparse trajectories extracted from the input. We term the deviation between input and output trajectories a "motion edit" and demonstrate that this representation, when coupled with a generative backbone, enables powerful video editing capabilities. To achieve this, we introduce a pipeline for generating "motion counterfactuals", video pairs that share identical content but distinct motion, and we fine-tune a motion-conditioned video diffusion architecture on this dataset. Our approach allows for edits that start at any timestamp and propagate naturally. In a four-way head-to-head user study, our model achieves over 65 percent preference against prior work. Please see our project page: https://ryanndagreat.github.io/MotionV2V

Controllable text generation is a growing field within natural language generation (NLG) that focuses on producing text that meets specific constraints in real-world applications. Previous approaches, such as plug-and-play controllers (PPCs), aimed to steer the properties of generated text in a flexible manner. However, these methods often compromised the integrity of the language model's decoding process, resulting in less smooth text generation. Alternatively, other techniques utilized multiple attribute prompts to align the generated text with desired attributes, but this approach required prompt design for each attribute and was dependent on the size of the language model. This paper introduces a novel method for flexible attribute control in text generation using pre-trained language models (PLMs). The proposed approach aims to enhance the fluency of generated text by guiding the generation process with PPCs. The key idea is to dynamically adjust the distribution of generated text by modifying prompts, effectively constraining the output space of the language model and influencing the desired attribute. To enable smooth cooperation between the PLM and the PPC, our work innovatively proposes a new model fine-tuning method: Reinforcement Learning with Dynamic Adjust Feedback (RLDAF).This fine-tuning process adapts a small subset of the language model's parameters based on the generating actions taken during the PPC control process. The resulting harmonious collaboration between the PLM and PPC leads to improved smoothness in text generation during inference. Extensive experiments were conducted on the SST2 dataset, and the proposed method outperformed previous approaches in various evaluation metrics, including text fluency and attribute consistency.

Safety performance evaluation is critical for developing and deploying connected and automated vehicles (CAVs). One prevailing way is to design testing scenarios using prior knowledge of CAVs, test CAVs in these scenarios, and then evaluate their safety performances. However, significant differences between CAVs and prior knowledge could severely reduce the evaluation efficiency. Towards addressing this issue, most existing studies focus on the adaptive design of testing scenarios during the CAV testing process, but so far they cannot be applied to high-dimensional scenarios. In this paper, we focus on the adaptive safety performance evaluation by leveraging the testing results, after the CAV testing process. It can significantly improve the evaluation efficiency and be applied to high-dimensional scenarios. Specifically, instead of directly evaluating the unknown quantity (e.g., crash rates) of CAV safety performances, we evaluate the differences between the unknown quantity and known quantity (i.e., control variates). By leveraging the testing results, the control variates could be well designed and optimized such that the differences are close to zero, so the evaluation variance could be dramatically reduced for different CAVs. To handle the high-dimensional scenarios, we propose the sparse control variates method, where the control variates are designed only for the sparse and critical variables of scenarios. According to the number of critical variables in each scenario, the control variates are stratified into strata and optimized within each stratum using multiple linear regression techniques. We justify the proposed method's effectiveness by rigorous theoretical analysis and empirical study of high-dimensional overtaking scenarios.

We introduce RoboEval, a structured evaluation framework and benchmark for robotic manipulation that augments binary success with principled behavioral and outcome metrics. Existing evaluations often collapse performance into outcome counts, masking differences in execution quality and obscuring failure structure. RoboEval provides eight bimanual tasks with systematically controlled variations, more than three thousand expert demonstrations, and a modular simulation platform for reproducible experimentation. All tasks are instrumented with standardized metrics that quantify efficiency, coordination, and safety/stability, as well as outcome measures that trace stagewise progress and localize failure modes. Through extensive experiments with state-of-the-art visuomotor policies, we validate these metrics by analyzing their stability under variation, discriminative power across policies with similar success rates, and correlation with task success. Project Page: https://robo-eval.github.io

We consider funnel control for linear infinite-dimensional systems that are impedance passive, meaning that they satisfy an energy balance in which the stored energy equals the squared norm of the state and the supplied power is the inner product of input and output. For the analysis we employ the system node approach, which offers a unified framework for infinite-dimensional systems with boundary and distributed control and observation. The resulting closed-loop dynamics are governed by a nonlinear evolution equation; we establish its solvability and hence the applicability of funnel control to this class. The applicability is illustrated by an Euler-Bernoulli beam, which is studied in two distinct scenarios: once with boundary control and once with distributed control.

When pretrained VLA policies are fine-tuned through online RL, each rollout episode produces only a single binary outcome (success or failure), yet the actor update requires per-transition supervision. Existing approaches commonly reduce this sparse outcome to a single scalar reward or advantage signal, which conflates distinct forms of transition-level feedback and provides limited guidance once basic task success becomes achievable. First, a single scalar signal conflates the two objectives of viability and efficiency; once basic success is achieved, the binary label provides no gradient to distinguish efficient completions from slow ones. Second, real-world rollouts mix autonomous and intervention segments; naively assigning episode outcomes across these boundaries introduces incorrect credit assignment. To address these issues, we propose Hierarchical Advantage-Weighted Behavior Cloning (HABC), which trains separate critic heads for these two objectives on different data subsets and combines their outputs with a state-adaptive balance. A state-adaptive gate g_t merges their one-step advantages, prioritizing viability when success is uncertain and shifting to efficiency only when viability is high, and converts the result into per-transition weights on the actor loss. Intervention-aware credit assignment further restricts outcome labels to segments executed by the current policy, preventing supervision from leaking across intervention boundaries. In real-robot experiments on three contact-rich bimanual tasks, HABC raises success from supervised fine-tuning (SFT) baselines of 36%, 44%, and 12% to 92%, 88%, and 38%.

To enhance the controllability of text-to-image diffusion models, existing efforts like ControlNet incorporated image-based conditional controls. In this paper, we reveal that existing methods still face significant challenges in generating images that align with the image conditional controls. To this end, we propose ControlNet++, a novel approach that improves controllable generation by explicitly optimizing pixel-level cycle consistency between generated images and conditional controls. Specifically, for an input conditional control, we use a pre-trained discriminative reward model to extract the corresponding condition of the generated images, and then optimize the consistency loss between the input conditional control and extracted condition. A straightforward implementation would be generating images from random noises and then calculating the consistency loss, but such an approach requires storing gradients for multiple sampling timesteps, leading to considerable time and memory costs. To address this, we introduce an efficient reward strategy that deliberately disturbs the input images by adding noise, and then uses the single-step denoised images for reward fine-tuning. This avoids the extensive costs associated with image sampling, allowing for more efficient reward fine-tuning. Extensive experiments show that ControlNet++ significantly improves controllability under various conditional controls. For example, it achieves improvements over ControlNet by 7.9% mIoU, 13.4% SSIM, and 7.6% RMSE, respectively, for segmentation mask, line-art edge, and depth conditions.

Embodied AI systems are often organized into System 1 and System 2. System 1 is typically a pretrained policy that generates actions at high frequency, whereas System 2 is often instantiated as a vision-enabled language model for high-level planning. We ask whether a large language model (LLM) can act as the policy for robot manipulation without task-specific finetuning. We call this setting LLM as policy. We evaluate three LLMs on all 42 RoboDojo tasks and compare their scores with 40 public policies. Astra and GPT-5.5 use the official 50-episode-per-task protocol; DeepSeek-Flash uses 10 episodes per task. GPT-6 Astra achieves 22.48% average success rate and 28.97 Score over 2,100 trials, ranking above every public entry. Yet GPT-5.5 and DeepSeek-Flash reach only 0.88% and 1.92% average success rate with the same post-processing. We find that Astra exhibits a sharply polarized capability profile. It generalizes well to tasks that require semantic understanding but not high-precision control. In contrast, it performs poorly on tasks that require precision, dynamic control, or complex bimanual coordination. In-context experiments show no aggregate benefit from one-shot demonstrations, while selected interaction traces show within-episode corrections under perturbations. Overall, the evaluated LLMs vary substantially in manipulation performance. Astra stands out and provides initial evidence for the potential of a general-purpose manipulation model, although reliable precision and dynamic control remain limitations in the evaluated setting.

Conditional visual generation has witnessed remarkable progress with the advent of diffusion models (DMs), especially in tasks like control-to-image generation. However, challenges such as expensive computational cost, high inference latency, and difficulties of integration with large language models (LLMs) have necessitated exploring alternatives to DMs. This paper introduces ControlVAR, a novel framework that explores pixel-level controls in visual autoregressive (VAR) modeling for flexible and efficient conditional generation. In contrast to traditional conditional models that learn the conditional distribution, ControlVAR jointly models the distribution of image and pixel-level conditions during training and imposes conditional controls during testing. To enhance the joint modeling, we adopt the next-scale AR prediction paradigm and unify control and image representations. A teacher-forcing guidance strategy is proposed to further facilitate controllable generation with joint modeling. Extensive experiments demonstrate the superior efficacy and flexibility of ControlVAR across various conditional generation tasks against popular conditional DMs, \eg, ControlNet and T2I-Adaptor. Code: https://github.com/lxa9867/ControlVAR.

Controllable text generation systems often leverage control codes to direct various properties of the output like style and length. Inspired by recent work on causal inference for NLP, this paper reveals a previously overlooked flaw in these control code-based conditional text generation algorithms. Spurious correlations in the training data can lead models to incorrectly rely on parts of the input other than the control code for attribute selection, significantly undermining downstream generation quality and controllability. We demonstrate the severity of this issue with a series of case studies and then propose two simple techniques to reduce these correlations in training sets. The first technique is based on resampling the data according to an example's propensity towards each linguistic attribute (IPS). The second produces multiple counterfactual versions of each example and then uses an additional feedback mechanism to remove noisy examples (feedback aware self-training, FAST). We evaluate on 3 tasks -- news headline, meta review, and search ads generation -- and demonstrate that FAST can significantly improve the controllability and language quality of generated outputs when compared to state-of-the-art controllable text generation approaches.

Memory-efficient large language models are good at refining text input for better readability. However, controllability is a matter of concern when it comes to text generation tasks with long inputs, such as multi-document summarization. In this work, we investigate for a generic controllable approach for multi-document summarization that leverages the capabilities of LLMs to refine the text. In particular, we train a controllable content extraction scheme to extract the text that will be refined by an LLM. The scheme is designed with a novel coverage and coherence intuitive policy, which is duly rewarded by a passively trained LLM. Our approach yields competitive results in the evaluation using ROUGE metrics and outperforms potential baselines in coherence, as per human evaluation.

Autoregressive (AR) models have reformulated image generation as next-token prediction, demonstrating remarkable potential and emerging as strong competitors to diffusion models. However, control-to-image generation, akin to ControlNet, remains largely unexplored within AR models. Although a natural approach, inspired by advancements in Large Language Models, is to tokenize control images into tokens and prefill them into the autoregressive model before decoding image tokens, it still falls short in generation quality compared to ControlNet and suffers from inefficiency. To this end, we introduce ControlAR, an efficient and effective framework for integrating spatial controls into autoregressive image generation models. Firstly, we explore control encoding for AR models and propose a lightweight control encoder to transform spatial inputs (e.g., canny edges or depth maps) into control tokens. Then ControlAR exploits the conditional decoding method to generate the next image token conditioned on the per-token fusion between control and image tokens, similar to positional encodings. Compared to prefilling tokens, using conditional decoding significantly strengthens the control capability of AR models but also maintains the model's efficiency. Furthermore, the proposed ControlAR surprisingly empowers AR models with arbitrary-resolution image generation via conditional decoding and specific controls. Extensive experiments can demonstrate the controllability of the proposed ControlAR for the autoregressive control-to-image generation across diverse inputs, including edges, depths, and segmentation masks. Furthermore, both quantitative and qualitative results indicate that ControlAR surpasses previous state-of-the-art controllable diffusion models, e.g., ControlNet++. Code, models, and demo will soon be available at https://github.com/hustvl/ControlAR.

In controllable generation tasks, flexibly manipulating the generated images to attain a desired appearance or structure based on a single input image cue remains a critical and longstanding challenge. Achieving this requires the effective decoupling of key attributes within the input image data, aiming to get representations accurately. Previous research has predominantly concentrated on disentangling image attributes within feature space. However, the complex distribution present in real-world data often makes the application of such decoupling algorithms to other datasets challenging. Moreover, the granularity of control over feature encoding frequently fails to meet specific task requirements. Upon scrutinizing the characteristics of various generative models, we have observed that the input sensitivity and dynamic evolution properties of the diffusion model can be effectively fused with the explicit decomposition operation in pixel space. This integration enables the image processing operations performed in pixel space for a specific feature distribution of the input image, and can achieve the desired control effect in the generated results. Therefore, we propose FilterPrompt, an approach to enhance the model control effect. It can be universally applied to any diffusion model, allowing users to adjust the representation of specific image features in accordance with task requirements, thereby facilitating more precise and controllable generation outcomes. In particular, our designed experiments demonstrate that the FilterPrompt optimizes feature correlation, mitigates content conflicts during the generation process, and enhances the model's control capability.

Model-based reinforcement learning (MBRL) has been shown to be a powerful framework for data-efficiently learning control of continuous tasks. Recent work in MBRL has mostly focused on using more advanced function approximators and planning schemes, with little development of the general framework. In this paper, we identify a fundamental issue of the standard MBRL framework -- what we call the objective mismatch issue. Objective mismatch arises when one objective is optimized in the hope that a second, often uncorrelated, metric will also be optimized. In the context of MBRL, we characterize the objective mismatch between training the forward dynamics model w.r.t.~the likelihood of the one-step ahead prediction, and the overall goal of improving performance on a downstream control task. For example, this issue can emerge with the realization that dynamics models effective for a specific task do not necessarily need to be globally accurate, and vice versa globally accurate models might not be sufficiently accurate locally to obtain good control performance on a specific task. In our experiments, we study this objective mismatch issue and demonstrate that the likelihood of one-step ahead predictions is not always correlated with control performance. This observation highlights a critical limitation in the MBRL framework which will require further research to be fully understood and addressed. We propose an initial method to mitigate the mismatch issue by re-weighting dynamics model training. Building on it, we conclude with a discussion about other potential directions of research for addressing this issue.

We address the problem of finite-horizon control of a discrete-time linear system, where the initial state distribution follows a Gaussian mixture model, the terminal state must follow a specified Gaussian distribution, and the state and control inputs must obey chance constraints. We show that, throughout the time horizon, the state and control distributions are fully characterized by Gaussian mixtures. We then formulate the cost, distributional terminal constraint, and affine/2-norm chance constraints on the state and control, as convex functions of the decision variables. This is leveraged to formulate the chance-constrained path planning problem as a single convex optimization problem. A numerical example demonstrates the effectiveness of the proposed method.

Background: The deployment of personalized Large Language Models (LLMs) is currently constrained by the stability-plasticity dilemma. Prevailing alignment methods, such as Supervised Fine-Tuning (SFT), rely on stochastic weight updates that often incur an "alignment tax" -- degrading general reasoning capabilities. Methods: We propose the Soul Engine, a framework based on the Linear Representation Hypothesis, which posits that personality traits exist as orthogonal linear subspaces. We introduce SoulBench, a dataset constructed via dynamic contextual sampling. Using a dual-head architecture on a frozen Qwen-2.5 base, we extract disentangled personality vectors without modifying the backbone weights. Results: Our experiments demonstrate three breakthroughs. First, High-Precision Profiling: The model achieves a Mean Squared Error (MSE) of 0.011 against psychological ground truth. Second, Geometric Orthogonality: T-SNE visualization confirms that personality manifolds are distinct and continuous, allowing for "Zero-Shot Personality Injection" that maintains original model intelligence. Third, Deterministic Steering: We achieve robust control over behavior via vector arithmetic, validated through extensive ablation studies. Conclusion: This work challenges the necessity of fine-tuning for personalization. By transitioning from probabilistic prompting to deterministic latent intervention, we provide a mathematically rigorous foundation for safe, controllable AI personalization.

Long-horizon mobile manipulation requires a robot to navigate multi-room environments and execute a sequence of manipulation skills under a single natural language instruction. Learning and evaluating these skills present three challenges: similar observations under a fixed task instruction may make skill selection ambiguous; even when a preceding skill succeeds, the robot state inherited by the next skill may deviate from its demonstrated starting states and affect execution; and task-level metrics hinder skill-specific diagnosis, while early failures leave later skills untested. We therefore introduce ManiUnit, a manipulation skill dataset and benchmark built from 50 BEHAVIOR-1K activities. Its dataset contains 137,899 segments across 21 skill types and 417 subtasks, and its benchmark contains 1,260 test instances. Correspondingly, ManiUnit pairs each segment with an explicit subtask instruction; measures sensitivity to perturbations of the robot's starting base position or joint configuration; and restores intermediate simulator states and defines local success conditions so that each skill can be evaluated without executing preceding stages. Evaluations of representative vision-language-action (VLA) policies show that similar aggregate scores can hide substantial per-skill differences. The tested starting-state perturbations also degrade execution: on the full benchmark, joint perturbations reduce success rates by approximately 56% relative to those from demonstrated starting states. On two long-horizon activities, a skill policy trained on ManiUnit segments achieves 78.7% local manipulation success, compared with 49.3% for a task policy trained on complete demonstrations. The trained skills further support complete-task execution on these activities, as coordinating the task and skill policies through a planner raises full-task success from 4.0% to 18.0%.

Controllable layout generation aims at synthesizing plausible arrangement of element bounding boxes with optional constraints, such as type or position of a specific element. In this work, we try to solve a broad range of layout generation tasks in a single model that is based on discrete state-space diffusion models. Our model, named LayoutDM, naturally handles the structured layout data in the discrete representation and learns to progressively infer a noiseless layout from the initial input, where we model the layout corruption process by modality-wise discrete diffusion. For conditional generation, we propose to inject layout constraints in the form of masking or logit adjustment during inference. We show in the experiments that our LayoutDM successfully generates high-quality layouts and outperforms both task-specific and task-agnostic baselines on several layout tasks.

Video synthesis techniques are undergoing rapid progress, with controllability being a significant aspect of practical usability for end-users. Although text condition is an effective way to guide video synthesis, capturing the correct joint distribution between text descriptions and video motion remains a substantial challenge. In this paper, we present a disentangled and unified framework, namely I2VControl, that unifies multiple motion control tasks in image-to-video synthesis. Our approach partitions the video into individual motion units and represents each unit with disentangled control signals, which allows for various control types to be flexibly combined within our single system. Furthermore, our methodology seamlessly integrates as a plug-in for pre-trained models and remains agnostic to specific model architectures. We conduct extensive experiments, achieving excellent performance on various control tasks, and our method further facilitates user-driven creative combinations, enhancing innovation and creativity. The project page is: https://wanquanf.github.io/I2VControl .

Interactive game world models typically autoregress visual observations directly in pixel or latent space, forcing structured properties such as pose, geometry, and occlusion to be implicitly maintained by the same generative sequence. Over long horizons, errors in these latent world properties accumulate, making consistency and controllability fragile. We explicitly model the evolving world state, delegate exact geometric computation to a fixed, zero-parameter renderer, and leave the neural model to synthesize appearance. We instantiate this idea as Marionette, a world model for interactive games with articulated characters. First, a two-stage autoregressive dynamics model predicts an explicit and interpretable 276-dimensional 3D world state comprising multi-entity articulated skeletons, metric root trajectories, and rotations. Second, a zero-parameter graphics bridge converts the predicted state into pose-control videos, computing world-space geometry and occlusion in closed form. Third, a control-conditioned video-diffusion observation model synthesizes photorealistic RGB observations from the resulting structured controls. Our experiments establish two properties of Marionette. First, the predicted world state is directly controllable. Forcing a mismatched action stream changes root-aligned joint error by 31% across 48 held-out segments. Second, long-horizon behaviour is determined in the state, and can be repaired there. Left free, the two generated characters drift to 21.2 m apart (recorded sessions stay near 5 m) and a third of frames show ground penetration. Two rules imposed on the explicit state, a terrain collider and a separation cap, cut penetration by 66% and keep the pair engaged, with no change to the observation model. Routing appearance through the predicted state costs no fidelity we can detect, at an FVD of 831 against 799 for recorded pose.

Generative world models aim to predict future states conditioned on actions, where action controllability is fundamental for reliable dynamics modeling. While recent efforts leverage simulator-generated data to enhance this capability, existing training pipelines face two fundamental limitations. First, static offline data collection leads to a distribution misalignment between training sets and the model's evolving error patterns, failing to resolve critical long-tail scenarios where dynamics predictions remain unreliable. Second, the standard objective of minimizing observational discrepancy often encourages the model to exploit spurious correlations instead of capturing the underlying action-effect causality. To address these limitations, we propose OnlineWM, an online training framework that continuously improves world modeling through active simulator interaction and causality-aware optimization. OnlineWM introduces two key innovations: (1) Active Online Learning: Instead of using fixed datasets, OnlineWM adaptively queries the simulator for new interaction sequences that target the model's current predictive weaknesses, ensuring high-utility data acquisition. (2) Causality-Aware Fine-Tuning: We propose a counterfactual learning strategy that contrasts the outcomes of different actions from identical states, forcing the model to attribute state transitions to specific actions rather than ambient environmental evolution, thereby grounding its predictions in reliable causal mechanisms. By integrating active data acquisition with causal optimization, OnlineWM establishes a closed-loop refinement process that ensures the model is both robust to diverse scenarios and precise in its causal attribution. Extensive experiments demonstrate that OnlineWM significantly enhances action controllability and generalizes effectively to unseen domains.

Camera sensor simulation serves as a critical role for autonomous driving (AD), e.g. evaluating vision-based AD algorithms. While existing approaches have leveraged generative models for controllable image/video generation, they remain constrained to generating multi-view video sequences with fixed camera viewpoints and video frequency, significantly limiting their downstream applications. To address this, we present a generalizable camera simulation framework DriveCamSim, whose core innovation lies in the proposed Explicit Camera Modeling (ECM) mechanism. Instead of implicit interaction through vanilla attention, ECM establishes explicit pixel-wise correspondences across multi-view and multi-frame dimensions, decoupling the model from overfitting to the specific camera configurations (intrinsic/extrinsic parameters, number of views) and temporal sampling rates presented in the training data. For controllable generation, we identify the issue of information loss inherent in existing conditional encoding and injection pipelines, proposing an information-preserving control mechanism. This control mechanism not only improves conditional controllability, but also can be extended to be identity-aware to enhance temporal consistency in foreground object rendering. With above designs, our model demonstrates superior performance in both visual quality and controllability, as well as generalization capability across spatial-level (camera parameters variations) and temporal-level (video frame rate variations), enabling flexible user-customizable camera simulation tailored to diverse application scenarios. Code will be avaliable at https://github.com/swc-17/DriveCamSim for facilitating future research.

Large language models (LLMs) exhibit distinct and consistent personalities that greatly impact trust and engagement. While this means that personality frameworks would be highly valuable tools to characterize and control LLMs' behavior, current approaches remain either costly (post-training) or brittle (prompt engineering). Probing and steering via linear directions has recently emerged as a cheap and efficient alternative. In this paper, we investigate whether linear directions aligned with the Big Five personality traits can be used for probing and steering model behavior. Using Llama 3.3 70B, we generate descriptions of 406 fictional characters and their Big Five trait scores. We then prompt the model with these descriptions and questions from the Alpaca questionnaire, allowing us to sample hidden activations that vary along personality traits in known, quantifiable ways. Using linear regression, we learn a set of per-layer directions in activation space, and test their effectiveness for probing and steering model behavior. Our results suggest that linear directions aligned with trait-scores are effective probes for personality detection, while their steering capabilities strongly depend on context, producing reliable effects in forced-choice tasks but limited influence in open-ended generation or when additional context is present in the prompt.