Daily Papers

Deep operator networks can become statistically unstable when partial differential equation inputs are observed at thousands of strongly correlated sensors but only a small number of operator samples is available. We introduce FAST-DeepONet, a branch representation combining a fixed spectral path with a regularized projection of the orthogonal residual, in which the directional penalty acts on the effective residual map after each of its rows is normalized. On Navier--Stokes flow a plain DeepONet degrades from 0.0394 to 0.1556 mean relative L_2 error as the branch grows from 129 to 8193 coordinates, while FAST-DeepONet stays near 0.04, so the sensor grid can be refined without a statistical penalty. Across independent test sets for Navier--Stokes flow, Darcy flow, and signed terminal wavefield prediction it lowers mean relative L_2 error by 4.7% to 37.0% with three to seven times fewer trainable parameters. A spectral-only branch sharing the same basis separates the two paths: the fixed spectral path carries the improvement on Navier--Stokes and Darcy, while terminal wave prediction requires the residual path together with its directional penalty. FAST-DeepONet targets coordinate-query architectures and trains on solution values alone.

The attention mechanism in a Transformer architecture matches key to query based on both content -- the what -- and position in a sequence -- the where. We present an analysis indicating that what and where are entangled in the popular RoPE rotary position embedding. This entanglement can impair performance particularly when decisions require independent matches on these two factors. We propose an improvement to RoPE, which we call Polar Coordinate Position Embeddings or PoPE, that eliminates the what-where confound. PoPE is far superior on a diagnostic task requiring indexing solely by position or by content. On autoregressive sequence modeling in music, genomic, and natural language domains, Transformers using PoPE as the positional encoding scheme outperform baselines using RoPE with respect to evaluation loss (perplexity) and downstream task performance. On language modeling, these gains persist across model scale, from 124M to 774M parameters. Crucially, PoPE shows strong zero-shot length extrapolation capabilities compared not only to RoPE but even a method designed for extrapolation, YaRN, which requires additional fine tuning and frequency interpolation.

Classical OCR pipelines decompose document reading into detection, segmentation, and recognition stages, which makes them sensitive to localization errors and difficult to extend to interactive querying. This work investigates whether a single compact model can jointly perform text recognition and spatial grounding on both handwritten and printed documents. We introduce PILOT, a 155M-parameter prompt-conditioned generative model that formulates document OCR as unified sequence generation. A lightweight depthwise-separable CNN encodes the page, and a Transformer decoder autoregressively emits a single stream of subword and quantized absolute-coordinate tokens on a 10\,px grid, enabling full-page OCR, region-conditioned reading, and query-by-string spotting within the same architecture. A three-stage curriculum, progressing from plain transcription to joint text-and-box generation and finally to prompt-controlled extraction, stabilizes training and improves spatial grounding. Experiments on IAM, RIMES~2009, SROIE~2019, and the heterogeneous MAURDOR benchmark show that PILOT achieves competitive or superior performance in text recognition and line-level detection compared with traditional OCR systems, recent end-to-end HTR models, and compact vision--language models, while remaining substantially smaller than billion-scale multimodal models. Additional evaluations on fine-grained OCR and query-by-string spotting further confirm that a unified text--layout decoder can provide accurate and efficient promptable OCR in a compact setting. To support reproducibility, we release the synthetic SROIE generator, the 500k annotated IDL/PDFA pages, the harmonized line-level annotations for IAM, RIMES~2009, and MAURDOR, and the source code at https://github.com/hamdilaziz/PILOT.

Perception-enhanced pre-training, particularly through grounding techniques, is widely adopted to enhance the performance of graphical user interface (GUI) agents. However, in resource-constrained scenarios, the format discrepancy between coordinate-oriented grounding and action-oriented reasoning limits the effectiveness of grounding for reasoning tasks. To address this challenge, we propose a query-oriented pivot approach called query inference, which serves as a bridge between GUI grounding and reasoning. By inferring potential user queries from a screenshot and its associated element coordinates, query inference improves the understanding of coordinates while aligning more closely with reasoning tasks. Experimental results show that query inference outperforms previous grounding techniques under the same training data scale. Notably, query inference achieves comparable or even better performance to large-scale grounding-enhanced OS-Atlas with less than 0.1% of training data. Furthermore, we explore the impact of reasoning formats and demonstrate that integrating additional semantic information into the input further boosts reasoning performance. The code is publicly available at https://github.com/ZrW00/GUIPivot.

Graph databases are gaining momentum thanks to the flexibility and expressiveness of their data models and query languages. A standardization activity driven by the ISO/IEC standardization body is also ongoing and has already conducted to the specification of the first versions of two standard graph query languages, namely SQL/PGQ and GQL, respectively in 2023 and 2024. Apart from the standards, there exists a panoply of concrete graph query languages provided by current graph database systems, each offering different query features. A common limitation of current graph query engines is the absence of an algebraic approach for evaluating path queries. To address this, we introduce an abstract algebra for evaluating path queries, allowing paths to be treated as first-class entities within the query processing pipeline. We demonstrate that our algebra can express a core fragment of path queries defined in GQL and SQL/PGQ, thereby serving as a formal framework for studying both standards and supporting their implementation in current graph database systems. We also show that evaluation trees for path algebra expressions can function as logical plans for evaluating path queries and enable the application of query optimization techniques. Our algebraic framework has the potential to act as a lingua franca for path query evaluation, enabling different implementations to be expressed and compared.

Ad hoc dataset search requires matching underspecified natural-language queries against sparse, heterogeneous metadata records, a task where typical lexical or dense retrieval alone falls short. We reposition dataset search as a software-architecture problem and propose a bounded, auditable reference architecture for agentic hybrid retrieval that combines BM25 lexical search with dense-embedding retrieval via reciprocal rank fusion (RRF), orchestrated by a large language model (LLM) agent that repeatedly plans queries, evaluates the sufficiency of results, and reranks candidates. To reduce the vocabulary mismatch between user intent and provider-authored metadata, we introduce an offline metadata augmentation step in which an LLM generates pseudo-queries for each dataset record, augmenting both retrieval indexes before query time. Two architectural styles are examined: a single ReAct agent and a multi-agent horizontal architecture with Feedback Control. Their quality-attribute tradeoffs are analyzed with respect to modifiability, observability, performance, and governance. An evaluation framework comprising seven system variants is defined to isolate the contribution of each architectural decision. The architecture is presented as an extensible reference design for the software architecture community, incorporating explicit governance tactics to bound and audit nondeterministic LLM components.

Approximate Nearest Neighbor Search (ANNS) is a core primitive for unstructured data retrieval. Real-world applications--such as temporal databases, financial data analysis, and retrieval-augmented generation--often require hybrid queries whose valid objects are constrained by continuous interval attributes, such as lifespans or price ranges. We study Interval-Predicate ANNS (IPANNS), where validity is determined by a predicate between an object interval and a query interval. Existing range-filtering ANNS (RFANNS) methods are designed for single-dimensional scalar filters, but interval predicates such as containment and overlap rely on two coupled endpoint constraints. Treating endpoints as independent scalar attributes can incur large intersection overhead, while containment-specific methods lack a generalized indexing abstraction. In this paper, we propose the Unified Dominance Graph (UDG), a graph-indexing framework for the closed two-bound conjunctive fragment of IPANNS. For a chosen interval predicate, UDG maps object and query endpoints into a normalized two-dimensional dominance space and builds a dominance-labeled graph over the transformed coordinates. Containment, overlap, and other supported endpoint-bound predicates therefore reuse the same construction and search algorithms after semantic mapping, while each UDG instance remains tied to its selected predicate. UDG compresses query-state-specific proximity graphs into one compact index. To improve graph search under restrictive interval filters, we add validity-preserving patch edges that provide routing choices when few objects remain valid. Extensive evaluations on standard benchmarks and real-world datasets show that UDG achieves stable query performance across multiple interval relations and workloads, significantly outperforming existing hybrid search baselines while maintaining low indexing overhead.

Large Language Models (LLMs) are increasingly deployed in applications that interact with the physical world, such as navigation, robotics, or mapping, making robust geospatial reasoning a critical capability. Despite that, LLMs' ability to reason about GPS coordinates and real-world geography remains underexplored. We introduce GPSBench, a dataset of 57,800 samples across 17 tasks for evaluating geospatial reasoning in LLMs, spanning geometric coordinate operations (e.g., distance and bearing computation) and reasoning that integrates coordinates with world knowledge. Focusing on intrinsic model capabilities rather than tool use, we evaluate 14 state-of-the-art LLMs and find that GPS reasoning remains challenging, with substantial variation across tasks: models are generally more reliable at real-world geographic reasoning than at geometric computations. Geographic knowledge degrades hierarchically, with strong country-level performance but weak city-level localization, while robustness to coordinate noise suggests genuine coordinate understanding rather than memorization. We further show that GPS-coordinate augmentation can improve in downstream geospatial tasks, and that finetuning induces trade-offs between gains in geometric computation and degradation in world knowledge. Our dataset and reproducible code are available at https://github.com/joey234/gpsbench

Unified remote sensing multimodal models exhibit a pronounced spatial reversal curse: Although they can accurately recognize and describe object locations in images, they often fail to faithfully execute the same spatial relations during text-to-image generation, where such relations constitute core semantic information in remote sensing. Motivated by this observation, we propose Uni-RS, the first unified multimodal model tailored for remote sensing, to explicitly address the spatial asymmetry between understanding and generation. Specifically, we first introduce explicit Spatial-Layout Planning to transform textual instructions into spatial layout plans, decoupling geometric planning from visual synthesis. We then impose Spatial-Aware Query Supervision to bias learnable queries toward spatial relations explicitly specified in the instruction. Finally, we develop Image-Caption Spatial Layout Variation to expose the model to systematic geometry-consistent spatial transformations. Extensive experiments across multiple benchmarks show that our approach substantially improves spatial faithfulness in text-to-image generation, while maintaining strong performance on multimodal understanding tasks like image captioning, visual grounding, and VQA tasks.

Autonomous discovery systems couple a resource that answers queries (a simulator, instrument, or analytic model) to an algorithm that selects what to query next. Most software frameworks for this loop inherit the control structure of numerical optimization: campaigns run for a fixed number of iterations, query costs are absent from the programming interface, and decision-making is treated as free. In practice, queries may differ in cost by orders of magnitude, and planners built on large language models or expensive surrogates consume resources of their own. Here we present CADAQUES, an open-source Python framework built on one architectural principle: cost is a first-class primitive of the discovery loop. CADAQUES separates the loop into two structural protocols, an Oracle that answers queries and a Driver that proposes them, and charges both evaluations and decisions against a common vector-valued budget spanning wall time, CPU hours, monetary cost, and language model tokens. An append-only ledger records, for each transaction, the cost declared before execution and the cost settled afterwards, making their discrepancy an observable property of the campaign. We evaluate the architecture by locating the critical temperature of the two-dimensional Ising model from noisy finite-size estimates against the exact thermodynamic-limit reference. In this noisy setting, strategies that concentrate around the best observed result can be misled by noise-induced peaks, whereas a schedule that explores with cheap low-fidelity queries and refines with higher-fidelity ones yields lower and less variable errors than high fidelity throughout, at the studied budget scale. Metering adds tens of microseconds per iteration, three orders of magnitude below the cheapest oracle query. The framework is MIT-licensed and archived at Zenodo (doi:10.5281/zenodo.21293589).

Large Vision-Language Models (LVLMs) map visual inputs into dense token sequences, imposing a quadratic computational bottleneck for inference. Elastic visual-token compression addresses this by training a single model that can run at multiple visual-token budgets. However, existing approaches struggle under aggressive compression. Spatial-only compression, as in nested pooling, behaves as an imperfect low-pass filter and induces spectral aliasing that obscures fine-grained detail. Query-only compression, as in nested query resampling, replaces explicit grid-aligned tokens with non-local summaries and substantially degrades spatial grounding. To resolve this representational conflict, we introduce PARCEL (Pool-Anchored Resampling with Conditioned Elastic Queries for Efficient Vision-Language Understanding), a visual tokenization architecture that dynamically partitions the labor of feature extraction. PARCEL establishes spatial pool tokens as low-frequency layout anchors and conditions elastic query tokens on these anchors through Pool-Conditioned Query Resampling. This encourages query tokens to focus on complementary visual features rather than redundant spatial mapping. Extensive evaluations across 27 benchmarks show that PARCEL improves the performance-efficiency Pareto frontier, consistently outperforming existing matryoshka baselines across visual-token budgets while preserving the "train once, deploy anywhere" paradigm.

Query-based 3D scene instance segmentation from point clouds has attained notable performance. However, existing methods suffer from the query initialization dilemma due to the sparse nature of point clouds and rely on computationally intensive attention mechanisms in query decoders. We accordingly introduce LaSSM, prioritizing simplicity and efficiency while maintaining competitive performance. Specifically, we propose a hierarchical semantic-spatial query initializer to derive the query set from superpoints by considering both semantic cues and spatial distribution, achieving comprehensive scene coverage and accelerated convergence. We further present a coordinate-guided state space model (SSM) decoder that progressively refines queries. The novel decoder features a local aggregation scheme that restricts the model to focus on geometrically coherent regions and a spatial dual-path SSM block to capture underlying dependencies within the query set by integrating associated coordinates information. Our design enables efficient instance prediction, avoiding the incorporation of noisy information and reducing redundant computation. LaSSM ranks first place on the latest ScanNet++ V2 leaderboard, outperforming the previous best method by 2.5% mAP with only 1/3 FLOPs, demonstrating its superiority in challenging large-scale scene instance segmentation. LaSSM also achieves competitive performance on ScanNet, ScanNet200, S3DIS and ScanNet++ V1 benchmarks with less computational cost. Extensive ablation studies and qualitative results validate the effectiveness of our design. The code and weights are available at https://github.com/RayYoh/LaSSM.

k-nearest neighbor (k-NN) search is a fundamental primitive in geometry processing and computer graphics. While spatial partitioning structures such as kd-trees are standard, they are often manifold-blind, failing to exploit the intrinsic low-dimensional structure of points sampled from 2-manifolds. Recent advances in dynamic programming-based nearest neighbor search (DP-NNS) leverage incrementally constructed Voronoi diagrams to accelerate queries, where each site p maintains a list of successors that progressively refine its Voronoi cell. However, DP-NNS is restricted to single nearest neighbor (k=1) searches, precluding their adoption in applications that require local neighborhood statistics. In this paper, we generalize the DP-NNS framework to support arbitrary k-NN queries for manifold-aligned data. Our approach is founded on the geometric observation that if p_i is the nearest neighbor of a query q in P, then the second nearest neighbor of q must reside either within the prefix set P_{1:i-1} = {p_1, \dots, p_{i-1}} or within p_i's successor list. By recursively extending this principle, we introduce Manifold k-NN, a recursive algorithmic scheme that significantly outperforms conventional kd-trees for manifold-aligned data. Our method achieves a 1\times--10\times speedup in volume-to-surface query scenarios and inherently supports dynamic prefix queries -- enabling k-NN searches within any subset P_{1:m} (m \leq n) with zero overhead. Furthermore, we extend the framework to support point deletion via local Delaunay updates, providing a complete suite of dynamic operations for point set modification. Comprehensive experiments on diverse geometric datasets demonstrate the efficiency and broad applicability of our approach for modern graphics pipelines. Source code is available at https://github.com/sssomeone/manifold-knn.

Vector databases typically rely on approximate nearest neighbor (ANN) search to retrieve the top-k closest vectors to a query in embedding space. While effective, this approach often yields semantically redundant results, missing the diversity and contextual richness required by applications such as retrieval-augmented generation (RAG), multi-hop QA, and memory-augmented agents. We introduce a new retrieval paradigm: semantic compression, which aims to select a compact, representative set of vectors that captures the broader semantic structure around a query. We formalize this objective using principles from submodular optimization and information geometry, and show that it generalizes traditional top-k retrieval by prioritizing coverage and diversity. To operationalize this idea, we propose graph-augmented vector retrieval, which overlays semantic graphs (e.g., kNN or knowledge-based links) atop vector spaces to enable multi-hop, context-aware search. We theoretically analyze the limitations of proximity-based retrieval under high-dimensional concentration and highlight how graph structures can improve semantic coverage. Our work outlines a foundation for meaning-centric vector search systems, emphasizing hybrid indexing, diversity-aware querying, and structured semantic retrieval. We make our implementation publicly available to foster future research in this area.

Retrieval-Augmented Generation for software engineering often relies on vector similarity search, which captures topical similarity but can fail on multi-hop architectural reasoning such as controller to service to repository chains, interface-driven wiring, and inheritance. This paper benchmarks three retrieval pipelines on Java codebases (Shopizer, with additional runs on ThingsBoard and OpenMRS Core): (A) vector-only No-Graph RAG, (B) an LLM-generated knowledge graph RAG (LLM-KB), and (C) a deterministic AST-derived knowledge graph RAG (DKB) built with Tree-sitter and bidirectional traversal. Using 15 architecture and code-tracing queries per repository, we measure indexing time, query latency, corpus coverage, cost, and answer correctness. DKB builds its graph in seconds, while LLM-KB requires much longer graph generation. LLM-KB also shows indexing incompleteness: on Shopizer, 377 files are skipped or missed, reducing embedded chunk coverage and graph size compared to DKB. End-to-end cost is modest for DKB relative to the vector-only baseline but much higher for LLM-KB, especially as repository scale increases. Query latency is similar for No-Graph and DKB, while LLM-KB is slower and more variable. On the Shopizer question suite, DKB achieves the highest correctness, LLM-KB is close behind, and the vector-only baseline performs worst on upstream architectural queries and has the highest hallucination risk. Overall, deterministic AST-derived graphs provide more reliable coverage and multi-hop grounding than LLM-extracted graphs at substantially lower indexing cost.

Web search queries concern place far more often than existing labelling schemes suggest, yet the landscape of geospatial web search queries - what people ask of place, and how often - remains poorly characterised at scale. We apply dense sentence embeddings, a lightweight SetFit classifier, and density-based clustering to the full MS MARCO corpus of 1.01 million real Bing queries without prior filtering for toponyms or spatial keywords, identifying 181,827 geospatial queries (18.0%), nearly threefold the 6.17% labelled as Location in the original annotations. The resulting taxonomy of 88 query categories reveals that geospatial web search is dominated by transactional and practical lookups: costs and prices alone account for 15.3% of geospatial queries, nearly twice the size of the entire physical geography theme. Much of this activity - costs, opening hours, contact details, weather, travel recommendations - falls outside the scope traditional GIS systems and knowledge graphs are built to serve. The categories vary substantially in the kind of answer they admit, from deterministic lookups answerable from spatial databases or knowledge graphs to evaluative or temporally volatile queries that require generative or real-time systems. We discuss implications for hybrid retrieval architectures and for benchmarks of geographic reasoning in large language models. We openly release the labelled dataset, classifier, and taxonomy.

Graph Retrieval-Augmented Generation (GraphRAG) is dominated by a retrieve-then-reason paradigm, where context is retrieved using heuristics and then reasoned over. Such methods struggle to adapt to the query-specific logic required for complex multi-hop tasks, often accumulating irrelevant context or missing correct relational paths. We propose DotRAG, a training-free GraphRAG framework that reformulates retrieval as a reasoning process over paths. Our approach generates query-conditioned constraints that guide graph exploration, prune irrelevant regions, and iteratively discover relational paths without relying on explicit step-by-step reasoning chains. We introduce Division of Thought (DOT), an abstraction that decomposes retrieval into localized search spaces and adapts the search strategy to each query. DotRAG achieves SOTA performance on MetaQA and UltraDomain, with consistent gains on multi-hop tasks, demonstrating the effectiveness of reasoning-guided retrieval.

Modern semantic search and retrieval-augmented generation (RAG) systems rely predominantly on in-memory approximate nearest neighbor (ANN) indexes over high-precision floating-point vectors, resulting in escalating operational cost and inherent trade-offs between latency, throughput, and retrieval accuracy. This paper analyzes the architectural limitations of the dominant "HNSW + float32 + cosine similarity" stack and evaluates existing cost-reduction strategies, including storage disaggregation and lossy vector quantization, which inevitably sacrifice either performance or accuracy. We introduce and empirically evaluate an alternative information-theoretic architecture based on maximally informative binarization (MIB), efficient bitwise distance metrics, and an information-theoretic scoring (ITS) mechanism. Unlike conventional ANN systems, this approach enables exhaustive search over compact binary representations, allowing deterministic retrieval and eliminating accuracy degradation under high query concurrency. Using the MAIR benchmark across 14 datasets and 10,038 queries, we compare this architecture against Elasticsearch, Pinecone, PGVector, and Qdrant. Results demonstrate retrieval quality comparable to full-precision systems, while achieving substantially lower latency and maintaining constant throughput at high request rates. We show that this architectural shift enables a truly serverless, cost-per-query deployment model, challenging the necessity of large in-memory ANN indexes for high-quality semantic search.

While feed-forward 3D Gaussian Splatting (3DGS) enables efficient 3D reconstruction, achieving high-fidelity rendering remains challenging. Existing pixel-aligned approaches suffer from spatial inflexibility and massive structural redundancy, whereas query-based methods lack 3D priors and entangle geometry with appearance, yielding blurry, pose-dependent results. To overcome these deficiencies, we propose QuerySplat, a feed-forward 3DGS framework driven by geometric priors and explicit appearance decoupling. Specifically, we design a dual-branch query-based decoder: the geometry branch leverages a pretrained Vision Geometric Model for spatial understanding, which intrinsically endows QuerySplat with pose-free modeling capabilities, while the appearance branch recovers high-frequency details through a dedicated pathway separated from geometric attribute regression. Extensive experiments demonstrate that QuerySplat mitigates the blurry rendering issues of early query-based models and consistently outperforms pixel-aligned approaches in rendering fidelity. On the challenging DL3DV benchmark, it achieves state-of-the-art novel view synthesis performance, with average PSNR gains of 2.30 dB and 1.04 dB over the best pose-free and pose-required baselines, respectively. Project Page: https://inspatio.github.io/querysplat.

3D object detection from LiDAR point clouds faces a fundamental dilemma: voxel-based methods achieve efficiency at the cost of geometric quantization, while point-based methods preserve fidelity but suffer from prohibitive computational bottlenecks. Specifically, point-based architectures are crippled by slow downsampling strategies (e.g., FPS) and expensive dynamic neighbor queries (e.g., k-NN) coupled with costly continuous interactions. To tackle these systemic inefficiencies, we propose PointLAM, a highly efficient and powerful point-based architecture driven by two synergistic innovations. First, to resolve the downsampling bottleneck, we develop the Laplacian Point Sampler (LPS). LPS employs an implicit discrete Laplacian high-pass filter and Doubly Sorted Sampling to achieve fast, structure-aware foreground preservation. Second, to overcome local modeling latency, we design the Local Hadamard Aggregator (LHA). LHA decouples spatial indexing from feature representation using transient grids, and replaces complex continuous interactions with a Hadamard Gating mechanism for topology-aware, attentive modulation. By coupling this local gating with Bi-Directional Mamba (BDM) layers for global sequence modeling, we formulate the Local Attentive Mamba (LAM) block. Powered by this architecture, PointLAM achieves competitive performance on nuScenes and Waymo for point-based detectors. It rivals highly optimized voxel competitors while requiring a fraction of the computational footprint, demonstrating marked superiority in detecting small instances and handling extreme sparsity. Project page: https://pointlam.github.io/.

Dynamic scenes may be captured by a moving camera, multiple video streams, or images taken at different times. These observations reveal complementary aspects of scene geometry and motion, yet bringing them together requires establishing correspondence across viewpoints, capture times, and visibility changes. We introduce ARROW, a feed-forward model that unifies 3D reconstruction and 3D point tracking from arbitrary image sets. At its core is a novel order-invariant querying approach, which allows the association of queries with observations across arbitrary inputs. We show that exposing the model to more diverse sets of inputs during training results in improved task performance. Moreover, the resulting model is capable of generalization to a wider range of tasks including multi-view tracking. Trained with this strategy, ARROW establishes a new state of the art in 3D tracking on WorldTrack and TAPVid-3D and outperforms dedicated multi-view trackers on an adapted RGB-only MVTracker benchmark, while remaining competitive across 3D reconstruction tasks. Code and weights are publicly available.

LLM agents operating over massive, dynamic tool libraries rely on effective retrieval, yet standard single-shot dense retrievers struggle with complex requests. These failures primarily stem from the disconnect between abstract user goals and technical documentation, and the limited capacity of fixed-size embeddings to model combinatorial tool compositions. To address these challenges, we propose TOOLQP, a lightweight framework that models retrieval as iterative query planning. Instead of single-shot matching, TOOLQP decomposes instructions into sub-tasks and dynamically generates queries to interact with the retriever, effectively bridging the semantic gap by targeting the specific sub-tasks required for composition. We train TOOLQP using synthetic query trajectories followed by optimization via Reinforcement Learning with Verifiable Rewards (RLVR). Experiments demonstrate that TOOLQP achieves state-of-the-art performance, exhibiting superior zero-shot generalization, robustness across diverse retrievers, and significant improvements in downstream agentic execution.

Recent advances in search-augmented large reasoning models (LRMs) enable the retrieval of external knowledge to reduce hallucinations in multistep reasoning. However, their ability to operate on graph-structured data, prevalent in domains such as e-commerce, social networks, and scientific citations, remains underexplored. Unlike plain text corpora, graphs encode rich topological signals that connect related entities and can serve as valuable priors for retrieval, enabling more targeted search and improved reasoning efficiency. Yet, effectively leveraging such structure poses unique challenges, including the difficulty of generating graph-expressive queries and ensuring reliable retrieval that balances structural and semantic relevance. To address this gap, we introduce GraphSearch, the first framework that extends search-augmented reasoning to graph learning, enabling zero-shot graph learning without task-specific fine-tuning. GraphSearch combines a Graph-aware Query Planner, which disentangles search space (e.g., 1-hop, multi-hop, or global neighbors) from semantic queries, with a Graph-aware Retriever, which constructs candidate sets based on topology and ranks them using a hybrid scoring function. We further instantiate two traversal modes: GraphSearch-R, which recursively expands neighborhoods hop by hop, and GraphSearch-F, which flexibly retrieves across local and global neighborhoods without hop constraints. Extensive experiments across diverse benchmarks show that GraphSearch achieves competitive or even superior performance compared to supervised graph learning methods, setting state-of-the-art results in zero-shot node classification and link prediction. These findings position GraphSearch as a flexible and generalizable paradigm for agentic reasoning over graphs.

In enterprise datasets, documents are rarely pure. They are not just text, nor just numbers; they are a complex amalgam of narrative and structure. Current Retrieval-Augmented Generation (RAG) systems have attempted to address this complexity with a blunt tool: linearization. We convert rich, multidimensional tables into simple Markdown-style text strings, hoping that an embedding model will capture the geometry of a spreadsheet in a single vector. But it has already been shown that this is mathematically insufficient. This work presents Topo-RAG, a framework that challenges the assumption that "everything is text". We propose a dual architecture that respects the topology of the data: we route fluid narrative through traditional dense retrievers, while tabular structures are processed by a Cell-Aware Late Interaction mechanism, preserving their spatial relationships. Evaluated on SEC-25, a synthetic enterprise corpus that mimics real-world complexity, Topo-RAG demonstrates an 18.4% improvement in nDCG@10 on hybrid queries compared to standard linearization approaches. It's not just about searching better; it's about understanding the shape of information.

Geospatial reasoning, i.e., computing distances, containment, and other spatial relations over real-world entities, is central to navigation and logistics, yet large language models (LLMs) struggle with the required geometric and topological computation despite storing considerable geographic knowledge. Existing benchmarks localize these failures only partially: they are synthetic or smallscale, largely monolingual, and offer limited control over geographic coverage. We introduce MultiGlobeQA, a multilingual benchmark of 46,060 question-answer pairs spanning 14 spatial-function families and 15 answer formats, with execution-based ground truth over three knowledge graphs. It covers 201 countries and territories via income- and density-stratified sampling, with parallel questions in English and 16 additional high- and low-resource languages. Across parametric, reasoning, and agentic settings, LLMs collapse on tasks requiring grid indexing and shape computation, while topological relations and directions fare best. Retrieval and tool use yield considerable gains, yet performance plateaus below two thirds even when gold facts are supplied, indicating that computation, not access to knowledge, is the bottleneck. Models also underperform on low-income regions, a gap that gold facts widen rather than close.

OpenStreetMap (OSM) is currently the richest publicly available information source on geographic entities (e.g., buildings and roads) worldwide. However, using OSM entities in machine learning models and other applications is challenging due to the large scale of OSM, the extreme heterogeneity of entity annotations, and a lack of a well-defined ontology to describe entity semantics and properties. This paper presents GeoVectors - a unique, comprehensive world-scale linked open corpus of OSM entity embeddings covering the entire OSM dataset and providing latent representations of over 980 million geographic entities in 180 countries. The GeoVectors corpus captures semantic and geographic dimensions of OSM entities and makes these entities directly accessible to machine learning algorithms and semantic applications. We create a semantic description of the GeoVectors corpus, including identity links to the Wikidata and DBpedia knowledge graphs to supply context information. Furthermore, we provide a SPARQL endpoint - a semantic interface that offers direct access to the semantic and latent representations of geographic entities in OSM.

Recent progress in large language models (LLMs) has enabled tool-augmented agents capable of solving complex real-world tasks through step-by-step reasoning. However, existing evaluations often focus on general-purpose or multimodal scenarios, leaving a gap in domain-specific benchmarks that assess tool-use capabilities in complex remote sensing use cases. We present ThinkGeo, an agentic benchmark designed to evaluate LLM-driven agents on remote sensing tasks via structured tool use and multi-step planning. Inspired by tool-interaction paradigms, ThinkGeo includes human-curated queries spanning a wide range of real-world applications such as urban planning, disaster assessment and change analysis, environmental monitoring, transportation analysis, aviation monitoring, recreational infrastructure, and industrial site analysis. Queries are grounded in satellite or aerial imagery, including both optical RGB and SAR data, and require agents to reason through a diverse toolset. We implement a ReAct-style interaction loop and evaluate both open and closed-source LLMs (e.g., GPT-4o, Qwen2.5) on 486 structured agentic tasks with 1,778 expert-verified reasoning steps. The benchmark reports both step-wise execution metrics and final answer correctness. Our analysis reveals notable disparities in tool accuracy and planning consistency across models. ThinkGeo provides the first extensive testbed for evaluating how tool-enabled LLMs handle spatial reasoning in remote sensing.

This paper introduces a dataset of enriched geographic coordinates retrieved from Diderot and d'Alembert's eighteenth-century Encyclopedie. Automatically recovering geographic coordinates from historical texts is a complex task, as they are expressed in a variety of ways and with varying levels of precision. To improve retrieval of coordinates from similar digitized early modern texts, we have created a gold standard dataset, trained models, published the resulting inferred and normalized coordinate data, and experimented applying these models to new texts. From 74,000 total articles in each of the digitized versions of the Encyclopedie from ARTFL and ENCCRE, we examined 15,278 geographical entries, manually identifying 4,798 containing coordinates, and 10,480 with descriptive but non-numerical references. Leveraging our gold standard annotations, we trained transformer-based models to retrieve and normalize coordinates. The pipeline presented here combines a classifier to identify coordinate-bearing entries and a second model for retrieval, tested across encoder-decoder and decoder architectures. Cross-validation yielded an 86% EM score. On an out-of-domain eighteenth-century Trevoux dictionary (also in French), our fine-tuned model had a 61% EM score, while for the nineteenth-century, 7th edition of the Encyclopaedia Britannica in English, the EM was 77%. These findings highlight the gold standard dataset's usefulness as training data, and our two-step method's cross-lingual, cross-domain generalizability.

Large-scale approximate nearest neighbor search commonly relies on partitions for indexing: database vectors are partitioned into clusters, and for each query a probing function selects the clusters to be scanned. The query probing function and the database partition are rarely treated as separate entities: most techniques assign queries with the same assignment function as the database vectors, which is suboptimal especially when database and query distributions differ. This paper introduces CwA (Cluster with Auctions), which addresses this limitation by jointly learning a balanced database partition and a neural probing function. CwA optimizes search performance directly for the query distribution. It minimizes its objective by alternating two steps: (i) gradient descent on the neural network of the probing function, and (ii) a large-scale combinatorial optimization of the cluster assignment for the database vectors. We solve the latter with a parallelizable auction algorithm that balances the partition by design. To further scale CwA, we extend the method to a Cartesian product of clusters that increases the partition's granularity. When database and query distributions differ, CwA achieves up to 4.7times throughput over the state-of-the-art at equal recall. In the in-distribution (ID) setting, even a simple linear probing function trained with CwA outperforms competing deep neural methods.

Large language models (LLMs) often exhibit complementary strengths. Model routing harnesses these strengths by dynamically directing each query to the most suitable model, given a candidate model pool. However, routing performance relies on accurate model representations, and adding new models typically requires retraining, limiting scalability. To address these challenges, we propose a novel routing method using in-context vectors to represent model capabilities. The method proceeds in two stages. First, queries are embedded and projected into vectors, with a projector and LLM-based router trained to reconstruct the original queries, aligning vector representations with the router's semantic space. Second, each candidate model is profiled on a query set, and the router learns -- based on in-context vectors of query and model performance -- to predict whether each model can correctly answer new queries. Extensive experiments demonstrate that our method achieves state-of-the-art routing performance in both in-distribution and out-of-distribution tasks. Moreover, our method allows for seamless integration of new models without retraining the router. The code is available at https://github.com/lalalamdbf/ICL-Router.

Programmatic representations provide a compelling paradigm for 3D content creation, enabling fine-grained edits, interpretability, and explicit structural control. Yet, agentic workflows that rely on large language models (LLMs) to author 3D programs remain brittle, often failing to translate high-level intent into consistent low-level geometry. We attribute this fragility to a mismatch between existing programmatic interfaces and the reasoning strengths of LLMs, which favor semantic structure and spatial relations over fragile numeric choices. In this paper, we jointly design an Agent-centric Domain-Specific Language (aDSL) and a role-specialized multi-agent system to close this gap. aDSL bridges semantic logic and geometric constraints by emphasizing composability and spatial reasoning; it enables agents to manipulate geometry through relational operators instead of brittle absolute coordinates. Building on aDSL, our training-free multi-agent system follows a Plan-Execute-Critic loop to decompose requests, synthesize code, and iteratively repair errors and constraint violations using execution feedback. Experiments show that this co-design improves robustness, controllability, and faithfulness to user intent. Our method outperforms prior LLM-based baselines on text-to-shape and image-to-shape tasks while preserving explicit structure, editability, and interpretability. It also enables downstream applications such as articulated object creation and structured scene composition. Our code is available at https://github.com/sig-pku/aDSL.

Recent Retrieval-Augmented Generation (RAG) systems increasingly combine vector retrieval with structured knowledge, such as Graph RAG and Filtered vector search. However, existing database architectures struggle to support such complex RAG workflows efficiently, as they rely on out-of-DB pipelines or in-DB non-native integration, leading to high overhead. This demo paper presents AkasicDB, a database system that natively supports such RAG workflows by jointly executing vector similarity search, graph traversal, and relational filtering within a single execution framework. AkasicDB extends our prior work, Chimera, with native vector support to enable such unified execution. Based on AkasicDB, we demonstrate the first native integration of Vector-Graph-Relational RAG, which we refer to as Omni RAG. Through an interactive chat-style demonstration, users execute and visualize Omni RAG queries, directly experiencing its superior retrieval and reasoning over vector-only approaches while observing the practical limitations of existing database architectures in supporting Omni RAG. A demonstration video is available at https://youtu.be/8d09_dtrEIM

Visual Place Recognition is a task that aims to predict the coordinates of an image (called query) based solely on visual clues. Most commonly, a retrieval approach is adopted, where the query is matched to the most similar images from a large database of geotagged photos, using learned global descriptors. Despite recent advances, recognizing the same place when the query comes from a significantly different distribution is still a major hurdle for state of the art retrieval methods. Examples are heavy illumination changes (e.g. night-time images) or substantial occlusions (e.g. transient objects). In this work we explore whether re-ranking methods based on spatial verification can tackle these challenges, following the intuition that local descriptors are inherently more robust than global features to domain shifts. To this end, we provide a new, comprehensive benchmark on current state of the art models. We also introduce two new demanding datasets with night and occluded queries, to be matched against a city-wide database. Code and datasets are available at https://github.com/gbarbarani/re-ranking-for-VPR.

Predictive modeling over relational databases (RDBs) powers applications, yet remains challenging due to capturing both cross-table dependencies and complex feature interactions. Relational Deep Learning (RDL) methods automate feature engineering via message passing, while classical approaches like Deep Feature Synthesis (DFS) rely on predefined non-parametric aggregators. Despite performance gains, the comparative advantages of RDL over DFS and the design principles for selecting effective architectures remain poorly understood. We present a comprehensive study that unifies RDL and DFS in a shared design space and conducts architecture-centric searches across diverse RDB tasks. Our analysis yields three key findings: (1) RDL does not consistently outperform DFS, with performance being highly task-dependent; (2) no single architecture dominates across tasks, underscoring the need for task-aware model selection; and (3) validation accuracy is an unreliable guide for architecture choice. This search yields a model performance bank that links architecture configurations to their performance; leveraging this bank, we analyze the drivers of the RDL-DFS performance gap and introduce two task signals -- RDB task homophily and an affinity embedding that captures size, path, feature, and temporal structure -- whose correlation with the gap enables principled routing. Guided by these signals, we propose Relatron, a task embedding-based meta-selector that chooses between RDL and DFS and prunes the within-family search. Lightweight loss-landscape metrics further guard against brittle checkpoints by preferring flatter optima. In experiments, Relatron resolves the "more tuning, worse performance" effect and, in joint hyperparameter-architecture optimization, achieves up to 18.5% improvement over strong baselines with 10x lower cost than Fisher information-based alternatives.

As AI agents become the primary consumers of retrieval APIs, there is an opportunity to expose more of the retrieval pipeline to the caller. flexvec is a retrieval kernel that exposes the embedding matrix and score array as a programmable surface, allowing arithmetic operations on both before selection. We refer to composing operations on this surface at query time as Programmatic Embedding Modulation (PEM). This paper describes a set of such operations and integrates them into a SQL interface via a query materializer that facilitates composable query primitives. On a production corpus of 240,000 chunks, three composed modulations execute in 19 ms end-to-end on a desktop CPU without approximate indexing. At one million chunks, the same operations execute in 82 ms.

We study the hop-constrained s-t path enumeration (HcPE) problem, which takes a graph G, two distinct vertices s,t and a hop constraint k as input, and outputs all paths from s to t whose length is at most k. The state-of-the-art algorithms suffer from severe performance issues caused by the costly pruning operations during enumeration for the workloads with the large search space. Consequently, these algorithms hardly meet the real-time constraints of many online applications. In this paper, we propose PathEnum, an efficient index-based algorithm towards real-time HcPE. For an input query, PathEnum first builds a light-weight index aiming to reduce the number of edges involved in the enumeration, and develops efficient index-based approaches for enumeration, one based on depth-first search and the other based on joins. We further develop a query optimizer based on a join-based cost model to optimize the search order. We conduct experiments with 15 real-world graphs. Our experiment results show that PathEnum outperforms the state-of-the-art approaches by orders of magnitude in terms of the query time, throughput and response time.

Plane geometry problem solving (PGPS) has recently gained significant attention as a benchmark to assess the multi-modal reasoning capabilities of large vision-language models. Despite the growing interest in PGPS, the research community still lacks a comprehensive overview that systematically synthesizes recent work in PGPS. To fill this gap, we present a survey of existing PGPS studies. We first categorize PGPS methods into an encoder-decoder framework and summarize the corresponding output formats used by their encoders and decoders. Subsequently, we classify and analyze these encoders and decoders according to their architectural designs. Finally, we outline major challenges and promising directions for future research. In particular, we discuss the hallucination issues arising during the encoding phase within encoder-decoder architectures, as well as the problem of data leakage in current PGPS benchmarks.

In recent years, 3D scene graphs have emerged as a powerful world representation, offering both geometric accuracy and semantic richness. Combining 3D scene graphs with large language models enables robots to reason, plan, and navigate in complex human-centered environments. However, current approaches for constructing 3D scene graphs are semantically limited to a predefined set of relationships, and their serialization in large environments can easily exceed an LLM's context window. We introduce KeySG, a framework that represents 3D scenes as a hierarchical graph consisting of floors, rooms, objects, and functional elements, where nodes are augmented with multi-modal information extracted from keyframes selected to optimize geometric and visual coverage. The keyframes allow us to efficiently leverage VLM to extract scene information, alleviating the need to explicitly model relationship edges between objects, enabling more general, task-agnostic reasoning and planning. Our approach can process complex and ambiguous queries while mitigating the scalability issues associated with large scene graphs by utilizing a hierarchical retrieval-augmented generation (RAG) pipeline to extract relevant context from the graph. Evaluated across four distinct benchmarks -- including 3D object segmentation and complex query retrieval -- KeySG outperforms prior approaches on most metrics, demonstrating its superior semantic richness and efficiency.

Cross-view geo-localization matches ground-level observations against geo-tagged satellite imagery. Recent methods show that sequential queries such as video clips yield richer spatiotemporal cues than single images, yet they overlook a complementary sequential modality: route descriptions -- which capture the same trajectory at a higher level of abstraction and are often the only input available (e.g., a user directing an autonomous vehicle to a pickup point). To bridge this gap, we introduce SeqGeo-VL, a dataset of sim39K video-text-satellite triplets, and TrajLoc, a unified framework capable of processing both video clips and route descriptions. By leveraging both dense visual and abstract linguistic semantics, TrajLoc enables these modalities to mutually reinforce cross-view matching. We further propose TrajMod, a lightweight module that conditions query embeddings on trajectory geometry, yielding spatially-aware representations. Experiments show that TrajLoc achieves substantial gains over state-of-the-art methods on both video and text geo-localization. The project page is available at https://humblegamer.github.io/trajloc/.

Recent advancements in foundation models have enhanced AI systems' capabilities in autonomous tool usage and reasoning. However, their ability in location or map-based reasoning - which improves daily life by optimizing navigation, facilitating resource discovery, and streamlining logistics - has not been systematically studied. To bridge this gap, we introduce MapEval, a benchmark designed to assess diverse and complex map-based user queries with geo-spatial reasoning. MapEval features three task types (textual, API-based, and visual) that require collecting world information via map tools, processing heterogeneous geo-spatial contexts (e.g., named entities, travel distances, user reviews or ratings, images), and compositional reasoning, which all state-of-the-art foundation models find challenging. Comprising 700 unique multiple-choice questions about locations across 180 cities and 54 countries, MapEval evaluates foundation models' ability to handle spatial relationships, map infographics, travel planning, and navigation challenges. Using MapEval, we conducted a comprehensive evaluation of 28 prominent foundation models. While no single model excelled across all tasks, Claude-3.5-Sonnet, GPT-4o, and Gemini-1.5-Pro achieved competitive performance overall. However, substantial performance gaps emerged, particularly in MapEval, where agents with Claude-3.5-Sonnet outperformed GPT-4o and Gemini-1.5-Pro by 16% and 21%, respectively, and the gaps became even more amplified when compared to open-source LLMs. Our detailed analyses provide insights into the strengths and weaknesses of current models, though all models still fall short of human performance by more than 20% on average, struggling with complex map images and rigorous geo-spatial reasoning. This gap highlights MapEval's critical role in advancing general-purpose foundation models with stronger geo-spatial understanding.

GUI grounding, the task of mapping natural-language instructions to pixel coordinates, is crucial for autonomous agents, yet remains difficult for current VLMs. The core bottleneck is reliable patch-to-pixel mapping, which breaks when extrapolating to high-resolution displays unseen during training. Current approaches generate coordinates as text tokens directly from visual features, forcing the model to infer complex position-to-pixel mappings implicitly; as a result, accuracy degrades and failures proliferate on new resolutions. We address this with two complementary innovations. First, RULER tokens serve as explicit coordinate markers, letting the model reference positions similar to gridlines on a map and adjust rather than generate coordinates from scratch. Second, Interleaved MRoPE (I-MRoPE) improves spatial encoding by ensuring that width and height dimensions are represented equally, addressing the asymmetry of standard positional schemes. Experiments on ScreenSpot, ScreenSpot-V2, and ScreenSpot-Pro show consistent gains in grounding accuracy, with the largest improvements on high-resolution interfaces. By providing explicit spatial guidance rather than relying on implicit learning, our approach enables more reliable GUI automation across diverse resolutions and platforms.

Modern code intelligence agents operate in contexts exceeding 1 million tokens--far beyond the scale where humans manually locate relevant files. Yet agents consistently fail to discover architecturally critical files when solving real-world coding tasks. We identify the Navigation Paradox: agents perform poorly not due to context limits, but because navigation and retrieval are fundamentally distinct problems. Through 258 automated trials across 30 benchmark tasks on a production FastAPI repository, we demonstrate that graph-based structural navigation via CodeCompass--a Model Context Protocol server exposing dependency graphs--achieves 99.4% task completion on hidden-dependency tasks, a 23.2 percentage-point improvement over vanilla agents (76.2%) and 21.2 points over BM25 retrieval (78.2%).However, we uncover a critical adoption gap: 58% of trials with graph access made zero tool calls, and agents required explicit prompt engineering to adopt the tool consistently. Our findings reveal that the bottleneck is not tool availability but behavioral alignment--agents must be explicitly guided to leverage structural context over lexical heuristics. We contribute: (1) a task taxonomy distinguishing semantic-search, structural, and hidden-dependency scenarios; (2) empirical evidence that graph navigation outperforms retrieval when dependencies lack lexical overlap; and (3) open-source infrastructure for reproducible evaluation of navigation tools.

The evaluation of navigation instructions remains a persistent challenge in Vision-and-Language Navigation (VLN) research. Traditional reference-based metrics such as BLEU and ROUGE fail to capture the functional utility of spatial directives, specifically whether an instruction successfully guides a navigator to the intended destination. Although existing VLN agents could serve as evaluators, their reliance on high-fidelity visual simulators introduces licensing constraints and computational costs, and perception errors further confound linguistic quality assessment. This paper introduces GROKE(Graph-based Reasoning over OSM Knowledge for instruction Evaluation), a vision-free training-free hierarchical LLM-based framework for evaluating navigation instructions using OpenStreetMap data. Through systematic ablation studies, we demonstrate that structured JSON and textual formats for spatial information substantially outperform grid-based and visual graph representations. Our hierarchical architecture combines sub-instruction planning with topological graph navigation, reducing navigation error by 68.5% compared to heuristic and sampling baselines on the Map2Seq dataset. The agent's execution success, trajectory fidelity, and decision patterns serve as proxy metrics for functional navigability given OSM-visible landmarks and topology, establishing a scalable and interpretable evaluation paradigm without visual dependencies. Code and data are available at https://anonymous.4open.science/r/groke.

The integration of Large Language Models (LLMs) into Geographic Information Systems (GIS) marks a paradigm shift toward autonomous spatial analysis. However, evaluating these LLM-based agents remains challenging due to the complex, multi-step nature of geospatial workflows. Existing benchmarks primarily rely on static text or code matching, neglecting dynamic runtime feedback and the multimodal nature of spatial outputs. To address this gap, we introduce GeoAgentBench (GABench), a dynamic and interactive evaluation benchmark tailored for tool-augmented GIS agents. GABench provides a realistic execution sandbox integrating 117 atomic GIS tools, encompassing 53 typical spatial analysis tasks across 6 core GIS domains. Recognizing that precise parameter configuration is the primary determinant of execution success in dynamic GIS environments, we designed the Parameter Execution Accuracy (PEA) metric, which utilizes a "Last-Attempt Alignment" strategy to quantify the fidelity of implicit parameter inference. Complementing this, a Vision-Language Model (VLM) based verification is proposed to assess data-spatial accuracy and cartographic style adherence. Furthermore, to address the frequent task failures caused by parameter misalignments and runtime anomalies, we developed a novel agent architecture, Plan-and-React, that mimics expert cognitive workflows by decoupling global orchestration from step-wise reactive execution. Extensive experiments with seven representative LLMs demonstrate that the Plan-and-React paradigm significantly outperforms traditional frameworks, achieving the optimal balance between logical rigor and execution robustness, particularly in multi-step reasoning and error recovery. Our findings highlight current capability boundaries and establish a robust standard for assessing and advancing the next generation of autonomous GeoAI.

With the advent of specialized hardware such as Graphics Processing Units (GPUs), large scale image localization, classification and retrieval have seen increased prevalence. Designing scalable software architecture that co-evolves with such specialized hardware is a challenge in the commercial setting. In this paper, we describe one such architecture (Cortexica) that leverages scalability of GPUs and sandboxing offered by docker containers. This allows for the flexibility of mixing different computer architectures as well as computational algorithms with the security of a trusted environment. We illustrate the utility of this framework in a commercial setting i.e., searching for multiple products in an image by combining image localisation and retrieval.

Mapping is crucial for spatial reasoning, planning and robot navigation. Existing approaches range from metric, which require precise geometry-based optimization, to purely topological, where image-as-node based graphs lack explicit object-level reasoning and interconnectivity. In this paper, we propose a novel topological representation of an environment based on "image segments", which are semantically meaningful and open-vocabulary queryable, conferring several advantages over previous works based on pixel-level features. Unlike 3D scene graphs, we create a purely topological graph with segments as nodes, where edges are formed by a) associating segment-level descriptors between pairs of consecutive images and b) connecting neighboring segments within an image using their pixel centroids. This unveils a "continuous sense of a place", defined by inter-image persistence of segments along with their intra-image neighbours. It further enables us to represent and update segment-level descriptors through neighborhood aggregation using graph convolution layers, which improves robot localization based on segment-level retrieval. Using real-world data, we show how our proposed map representation can be used to i) generate navigation plans in the form of "hops over segments" and ii) search for target objects using natural language queries describing spatial relations of objects. Furthermore, we quantitatively analyze data association at the segment level, which underpins inter-image connectivity during mapping and segment-level localization when revisiting the same place. Finally, we show preliminary trials on segment-level `hopping' based zero-shot real-world navigation. Project page with supplementary details: oravus.github.io/RoboHop/

Large-scale visual localization systems continue to rely on 3D point clouds built from image collections using structure-from-motion. While the 3D points in these models are represented using local image features, directly matching a query image's local features against the point cloud is challenging due to the scale of the nearest-neighbor search problem. Many recent approaches to visual localization have thus proposed a hybrid method, where first a global (per image) embedding is used to retrieve a small subset of database images, and local features of the query are matched only against those. It seems to have become common belief that global embeddings are critical for said image-retrieval in visual localization, despite the significant downside of having to compute two feature types for each query image. In this paper, we take a step back from this assumption and propose Constrained Approximate Nearest Neighbors (CANN), a joint solution of k-nearest-neighbors across both the geometry and appearance space using only local features. We first derive the theoretical foundation for k-nearest-neighbor retrieval across multiple metrics and then showcase how CANN improves visual localization. Our experiments on public localization benchmarks demonstrate that our method significantly outperforms both state-of-the-art global feature-based retrieval and approaches using local feature aggregation schemes. Moreover, it is an order of magnitude faster in both index and query time than feature aggregation schemes for these datasets. Code will be released.

Recent advances in Retrieval-Augmented Generation (RAG) have shifted from simple vector similarity to structure-aware approaches like HippoRAG, which leverage Knowledge Graphs (KGs) and Personalized PageRank (PPR) to capture multi-hop dependencies. However, these methods suffer from a "Static Graph Fallacy": they rely on fixed transition probabilities determined during indexing. This rigidity ignores the query-dependent nature of edge relevance, causing semantic drift where random walks are diverted into high-degree "hub" nodes before reaching critical downstream evidence. Consequently, models often achieve high partial recall but fail to retrieve the complete evidence chain required for multi-hop queries. To address this, we propose CatRAG, Context-Aware Traversal for robust RAG, a framework that builds on the HippoRAG 2 architecture and transforms the static KG into a query-adaptive navigation structure. We introduce a multi-faceted framework to steer the random walk: (1) Symbolic Anchoring, which injects weak entity constraints to regularize the random walk; (2) Query-Aware Dynamic Edge Weighting, which dynamically modulates graph structure, to prune irrelevant paths while amplifying those aligned with the query's intent; and (3) Key-Fact Passage Weight Enhancement, a cost-efficient bias that structurally anchors the random walk to likely evidence. Experiments across four multi-hop benchmarks demonstrate that CatRAG consistently outperforms state of the art baselines. Our analysis reveals that while standard Recall metrics show modest gains, CatRAG achieves substantial improvements in reasoning completeness, the capacity to recover the entire evidence path without gaps. These results reveal that our approach effectively bridges the gap between retrieving partial context and enabling fully grounded reasoning. Resources are available at https://github.com/kwunhang/CatRAG.

Large language models deployed in regulated industries operate under two constraints: compliance enforcement and cost efficiency. Personally identifiable information (PII) in user queries can reach model endpoints before the system determines whether that data should leave its jurisdictional boundary. Serving all queries through a single large model consumes full GPU capacity regardless of query complexity while offering no mechanism for geographic routing. Mixture-of-Experts architectures do not address this routing occurs between expert layers within the model after data has already arrived at the endpoint, with all experts loaded in memory regardless of query complexity. We propose a classifier-gated routing architecture that enforces compliance by design. A trained encoder classifier sits before any decoder inference, evaluating each query for complexity and data sensitivity, then routing it to an appropriately sized dense model in the appropriate geographic location. PII-containing queries route to local endpoints before any LLM computation begins, making data residency violations structurally impossible. Simple queries reach small, fast models at a fraction of the cost. Our evaluation on 600 queries demonstrates 39% median latency reduction, 33-52% cost savings depending on query distribution, and generation throughput of 122-200 tokens/second versus 50-64 for the baseline. The encoder classifier achieves 99.2% accuracy with near-perfect PII recall at 7ms inference overhead, establishing pre-inference classification as a practical path to compliance-by-design LLM deployment.

Retrieving images from the same location as a given query is an important component of multiple computer vision tasks, like Visual Place Recognition, Landmark Retrieval, Visual Localization, 3D reconstruction, and SLAM. However, existing solutions are built to specifically work for one of these tasks, and are known to fail when the requirements slightly change or when they meet out-of-distribution data. In this paper we combine a variety of existing methods, training techniques, and datasets to train a retrieval model, called MegaLoc, that is performant on multiple tasks. We find that MegaLoc (1) achieves state of the art on a large number of Visual Place Recognition datasets, (2) impressive results on common Landmark Retrieval datasets, and (3) sets a new state of the art for Visual Localization on the LaMAR datasets, where we only changed the retrieval method to the existing localization pipeline. The code for MegaLoc is available at https://github.com/gmberton/MegaLoc

Knowledge graph engineering often distributes accepted state, observations, constraints, processes, and hypothetical scenarios across artifacts whose combined execution contract remains external. We present PULSE, an Object-Process-Methodology-inspired language that localizes four operational roles and their write effects in one typed runtime. Here, modes denote operational roles rather than modal or deontic logic. The implemented contract fixes evidence non-overwrite, branch isolation, grounded multi-subject timers, guarded state change, and declaration-ranked event ordering over time and space; an external runner still decides whether evidence becomes an authoritative move. GeoSPARQL, SOSA, and SHACL remain generated views. A core calculus gives an effect-confinement lemma and six safety properties. Lean 4 checks kernel analogues for positions, evidence, clocks, monitors, atomicity, and branch source retention; 88 tests, 3,534 bounded checks, and 32 Lean/Python runtime-kernel cases bound the implementation claim to the checked cases. First-author implementations of a standards composition and a separate Sismic statechart reproduce the tested cold-chain trace. Across 37,440 generated temporal traces, PULSE matches a separate workflow and distinguishes ten single-field mutants. On the complete NOAA IBTrACS since1980 subset it agrees with GEOS and an event sweep on 1,476,290 transition-zone pairs, including 4,800 sampled and 12,831 duration-qualified events. Project-specific GeoSPARQL probes measure interface coverage. Overall, the results support contract localization, safety arguments, and trace parity for the tested fragment; language superiority and usability remain outside the evaluation.

Reasoning over knowledge graphs (KGs) is a challenging task that requires a deep understanding of the complex relationships between entities and the underlying logic of their relations. Current approaches rely on learning geometries to embed entities in vector space for logical query operations, but they suffer from subpar performance on complex queries and dataset-specific representations. In this paper, we propose a novel decoupled approach, Language-guided Abstract Reasoning over Knowledge graphs (LARK), that formulates complex KG reasoning as a combination of contextual KG search and logical query reasoning, to leverage the strengths of graph extraction algorithms and large language models (LLM), respectively. Our experiments demonstrate that the proposed approach outperforms state-of-the-art KG reasoning methods on standard benchmark datasets across several logical query constructs, with significant performance gain for queries of higher complexity. Furthermore, we show that the performance of our approach improves proportionally to the increase in size of the underlying LLM, enabling the integration of the latest advancements in LLMs for logical reasoning over KGs. Our work presents a new direction for addressing the challenges of complex KG reasoning and paves the way for future research in this area.

Large Language Models (LLMs) excel in stand-alone code tasks like HumanEval and MBPP, but struggle with handling entire code repositories. This challenge has prompted research on enhancing LLM-codebase interaction at a repository scale. Current solutions rely on similarity-based retrieval or manual tools and APIs, each with notable drawbacks. Similarity-based retrieval often has low recall in complex tasks, while manual tools and APIs are typically task-specific and require expert knowledge, reducing their generalizability across diverse code tasks and real-world applications. To mitigate these limitations, we introduce \framework, a system that integrates LLM agents with graph database interfaces extracted from code repositories. By leveraging the structural properties of graph databases and the flexibility of the graph query language, \framework enables the LLM agent to construct and execute queries, allowing for precise, code structure-aware context retrieval and code navigation. We assess \framework using three benchmarks: CrossCodeEval, SWE-bench, and EvoCodeBench. Additionally, we develop five real-world coding applications. With a unified graph database schema, \framework demonstrates competitive performance and potential in both academic and real-world environments, showcasing its versatility and efficacy in software engineering. Our application demo: https://github.com/modelscope/modelscope-agent/tree/master/apps/codexgraph_agent.

Geometry problem solving (GPS) represents a critical frontier in artificial intelligence, with profound applications in education, computer-aided design, and computational graphics. Despite its significance, automating GPS remains challenging due to the dual demands of spatial understanding and rigorous logical reasoning. Recent advances in large models have enabled notable breakthroughs, particularly for SAT-level problems, yet the field remains fragmented across methodologies, benchmarks, and evaluation frameworks. This survey systematically synthesizes GPS advancements through three core dimensions: (1) benchmark construction, (2) textual and diagrammatic parsing, and (3) reasoning paradigms. We further propose a unified analytical paradigm, assess current limitations, and identify emerging opportunities to guide future research toward human-level geometric reasoning, including automated benchmark generation and interpretable neuro-symbolic integration.

In SPARQL, the query forms SELECT and CONSTRUCT have been the subject of several studies, both theoretical and practical. However, the composition of such queries and their interweaving when forming involved nested queries has not yet received much interest in the literature. We mainly tackle the problem of composing such queries. For this purpose, we introduce a language close to SPARQL where queries can be nested at will, involving either CONSTRUCT or SELECT query forms and provide a formal semantics for it. This semantics is based on a uniform interpretation of queries. This uniformity is due to an extension of the notion of RDF graphs to include isolated items such as variables. As a key feature of this work, we show how classical SELECT queries can be easily encoded as a particular case of CONSTRUCT queries.

Benchmarking spatial reasoning in multimodal large language models (MLLMs) has attracted growing interest in computer vision due to its importance for embodied AI and other agentic systems that require precise interaction with the physical world. However, spatial reasoning on Earth imagery has lagged behind, as it uniquely involves grounding objects in georeferenced images and quantitatively reasoning about distances, directions, and topological relations using both visual cues and vector geometry coordinates (e.g., 2D bounding boxes, polylines, and polygons). Existing benchmarks for Earth imagery primarily focus on 2D spatial grounding, image captioning, and coarse spatial relations (e.g., simple directional or proximity cues). They lack support for quantitative direction and distance reasoning, systematic topological relations, and complex object geometries beyond bounding boxes. To fill this gap, we propose EarthSpatialBench, a comprehensive benchmark for evaluating spatial reasoning in MLLMs on Earth imagery. The benchmark contains over 325K question-answer pairs spanning: (1) qualitative and quantitative reasoning about spatial distance and direction; (2) systematic topological relations; (3) single-object queries, object-pair queries, and compositional aggregate group queries; and (4) object references expressed via textual descriptions, visual overlays, and explicit geometry coordinates, including 2D bounding boxes, polylines, and polygons. We conducted extensive experiments on both open-source and proprietary models to identify limitations in the spatial reasoning of MLLMs.

Reasoning-augmented search agents such as Search-R1, trained via reinforcement learning with verifiable rewards (RLVR), demonstrate remarkable capabilities in multi-step information retrieval from external knowledge sources. These agents address the limitations of their parametric memory by dynamically gathering relevant facts to address complex reasoning tasks. However, existing approaches suffer from a fundamental architectural limitation: they process search queries strictly sequentially, even when handling inherently parallelizable and logically independent comparisons. This sequential bottleneck significantly constrains computational efficiency, particularly for queries that require multiple entity comparisons. To address this critical limitation, we propose ParallelSearch, a novel reinforcement learning framework that empowers large language models (LLMs) to recognize parallelizable query structures and execute multiple search operations concurrently. Our approach introduces dedicated reward functions that incentivize the identification of independent query components while preserving answer accuracy through jointly considering correctness, query decomposition quality, and parallel execution benefits. Comprehensive experiments demonstrate that ParallelSearch outperforms state-of-the-art baselines by an average performance gain of 2.9% across seven question-answering benchmarks. Notably, on parallelizable questions, our method achieves a 12.7% performance improvement while requiring only 69.6% of the LLM calls compared to sequential approaches.

Many knowledge graphs contain a substantial number of spatial entities, such as cities, buildings, and natural landmarks. For many of these entities, exact geometries are stored within the knowledge graphs. However, most existing approaches for learning entity representations do not take these geometries into account. In this paper, we introduce a variant of RDF2Vec that incorporates geometric information to learn location-aware embeddings of entities. Our approach expands different nodes by flooding the graph from geographic nodes, ensuring that each reachable node is considered. Based on the resulting flooded graph, we apply a modified version of RDF2Vec that biases graph walks using spatial weights. Through evaluations on multiple benchmark datasets, we demonstrate that our approach outperforms both non-location-aware RDF2Vec and GeoTransE.

Retrieval-augmented generation (RAG) is a powerful technique that enhances downstream task execution by retrieving additional information, such as knowledge, skills, and tools from external sources. Graph, by its intrinsic "nodes connected by edges" nature, encodes massive heterogeneous and relational information, making it a golden resource for RAG in tremendous real-world applications. As a result, we have recently witnessed increasing attention on equipping RAG with Graph, i.e., GraphRAG. However, unlike conventional RAG, where the retriever, generator, and external data sources can be uniformly designed in the neural-embedding space, the uniqueness of graph-structured data, such as diverse-formatted and domain-specific relational knowledge, poses unique and significant challenges when designing GraphRAG for different domains. Given the broad applicability, the associated design challenges, and the recent surge in GraphRAG, a systematic and up-to-date survey of its key concepts and techniques is urgently desired. Following this motivation, we present a comprehensive and up-to-date survey on GraphRAG. Our survey first proposes a holistic GraphRAG framework by defining its key components, including query processor, retriever, organizer, generator, and data source. Furthermore, recognizing that graphs in different domains exhibit distinct relational patterns and require dedicated designs, we review GraphRAG techniques uniquely tailored to each domain. Finally, we discuss research challenges and brainstorm directions to inspire cross-disciplinary opportunities. Our survey repository is publicly maintained at https://github.com/Graph-RAG/GraphRAG/.

Transformers have been recently explored for 3D point cloud understanding with impressive progress achieved. A large number of points, over 0.1 million, make the global self-attention infeasible for point cloud data. Thus, most methods propose to apply the transformer in a local region, e.g., spherical or cubic window. However, it still contains a large number of Query-Key pairs, which requires high computational costs. In addition, previous methods usually learn the query, key, and value using a linear projection without modeling the local 3D geometric structure. In this paper, we attempt to reduce the costs and model the local geometry prior by developing a new transformer block, named ConDaFormer. Technically, ConDaFormer disassembles the cubic window into three orthogonal 2D planes, leading to fewer points when modeling the attention in a similar range. The disassembling operation is beneficial to enlarging the range of attention without increasing the computational complexity, but ignores some contexts. To provide a remedy, we develop a local structure enhancement strategy that introduces a depth-wise convolution before and after the attention. This scheme can also capture the local geometric information. Taking advantage of these designs, ConDaFormer captures both long-range contextual information and local priors. The effectiveness is demonstrated by experimental results on several 3D point cloud understanding benchmarks. Code is available at https://github.com/LHDuan/ConDaFormer .

Large language models (LLMs) have recently shown strong potential in modeling relational structures. However, existing approaches remain fundamentally graph-centric: they focus on processing pairwise graph structures into tokens that LLMs can understand. In contrast, many real-world relational patterns do not naturally conform to the pairwise-edge assumption, and are better modeled as high-order associations in hypergraphs. For hypergraph structures, existing methods often fail to preserve the native semantics that multiple objects are jointly connected by the same high-order relation, limiting their ability to exploit complex structures. To address this limitation, we put forth the "Hypergraph as Language" perspective and propose Hyper-Align, a hypergraph-native alignment framework for large language models. Hyper-Align compiles the query-object-centered hypergraph context into hypergraph tokens directly consumable by a base LLM. Specifically, we introduce Hypergraph Incidence Detail Template with Overview (HIDT-O), which serializes high-order association structures into a fixed-shape hybrid template combining local incidence details and overview-level summaries. We then design a Hypergraph Incidence Projector (HIP), which maps native high-order incidence structures into the LLM token space through explicit semantic-structural decoupling and bidirectional message passing between vertices and hyperedges. We further define a concrete Hypergraph-as-Language input protocol, which jointly feeds hypergraph tokens and textual prompts into a frozen base LLM, supporting both vertex-level and hyperedge-level tasks under a unified question-answering paradigm. To systematically evaluate different methods in hypergraph structural modeling, we introduce HyperAlign-Bench. Extensive experiments show that Hyper-Align significantly outperforms existing methods across in-domain and zero-shot evaluations.

Despite their proficiency in general tasks, Multi-modal Large Language Models (MLLMs) struggle with automatic Geometry Problem Solving (GPS), which demands understanding diagrams, interpreting symbols, and performing complex reasoning. This limitation arises from their pre-training on natural images and texts, along with the lack of automated verification in the problem-solving process. Besides, current geometric specialists are limited by their task-specific designs, making them less effective for broader geometric problems. To this end, we present GeoX, a multi-modal large model focusing on geometric understanding and reasoning tasks. Given the significant differences between geometric diagram-symbol and natural image-text, we introduce unimodal pre-training to develop a diagram encoder and symbol decoder, enhancing the understanding of geometric images and corpora. Furthermore, we introduce geometry-language alignment, an effective pre-training paradigm that bridges the modality gap between unimodal geometric experts. We propose a Generator-And-Sampler Transformer (GS-Former) to generate discriminative queries and eliminate uninformative representations from unevenly distributed geometric signals. Finally, GeoX benefits from visual instruction tuning, empowering it to take geometric images and questions as input and generate verifiable solutions. Experiments show that GeoX outperforms both generalists and geometric specialists on publicly recognized benchmarks, such as GeoQA, UniGeo, Geometry3K, and PGPS9k.

Mathematical geometric problem solving (GPS) often requires effective integration of multimodal information and verifiable logical coherence. Despite the fast development of large language models in general problem solving, it remains unresolved regarding with both methodology and benchmarks, especially given the fact that exiting synthetic GPS benchmarks are often not self-verified and contain noise and self-contradicted information due to the illusion of LLMs. In this paper, we propose a scalable data engine called TrustGeoGen for problem generation, with formal verification to provide a principled benchmark, which we believe lays the foundation for the further development of methods for GPS. The engine synthesizes geometric data through four key innovations: 1) multimodal-aligned generation of diagrams, textual descriptions, and stepwise solutions; 2) formal verification ensuring rule-compliant reasoning paths; 3) a bootstrapping mechanism enabling complexity escalation via recursive state generation and 4) our devised GeoExplore series algorithms simultaneously produce multi-solution variants and self-reflective backtracking traces. By formal logical verification, TrustGeoGen produces GeoTrust-200K dataset with guaranteed modality integrity, along with GeoTrust-test testset. Experiments reveal the state-of-the-art models achieve only 49.17\% accuracy on GeoTrust-test, demonstrating its evaluation stringency. Crucially, models trained on GeoTrust achieve OOD generalization on GeoQA, significantly reducing logical inconsistencies relative to pseudo-label annotated by OpenAI-o1. Our code is available at https://github.com/Alpha-Innovator/TrustGeoGen

3D Gaussian Splatting (3DGS) has emerged as a prominent paradigm for 3D reconstruction and novel view synthesis. However, it remains vulnerable to severe artifacts when trained under sparse-view constraints. While recent methods attempt to rectify artifacts in rendered views using image diffusion models, they typically rely on multi-view self-attention to retrieve information from reference images. We observe that this mechanism often fails when the rendered novel views output by 3DGS are heavily corrupted: damaged query features lead to erroneous cross-view retrieval, resulting in inconsistent rendering refinement. To address this, we propose GeoQuery, a geometry-guided diffusion framework that integrates generative priors with explicit geometric cues via a novel Geometry-guided Cross-view Attention (GCA) mechanism. First, by leveraging predicted depth maps and camera poses, we construct a geometry-induced correspondence field to sample reference features, forming a geometry-aligned proxy query that replaces the corrupted rendering features. Furthermore, we design a new cross-view feature aggregation pipeline, in which we restrict the cross-view attention to a local window around each proxy query to effectively retrieve useful features while suppressing spurious matches. GeoQuery can be seamlessly integrated into existing diffusion-based pipelines, enabling robust reconstruction even under extreme view sparsity. Extensive experiments on sparse-view novel view synthesis and rendering artifact removal demonstrate the effectiveness of our approach.

Global challenges such as food supply chain disruptions, public health crises, and natural hazard responses require access to and integration of diverse datasets, many of which are geospatial. Over the past few years, a growing number of (geo)portals have been developed to address this need. However, most existing (geo)portals are stacked by separated or sparsely connected data "silos" impeding effective data consolidation. A new way of sharing and reusing geospatial data is therefore urgently needed. In this work, we introduce KnowWhereGraph, a knowledge graph-based data integration, enrichment, and synthesis framework that not only includes schemas and data related to human and environmental systems but also provides a suite of supporting tools for accessing this information. The KnowWhereGraph aims to address the challenge of data integration by building a large-scale, cross-domain, pre-integrated, FAIR-principles-based, and AI-ready data warehouse rooted in knowledge graphs. We highlight the design principles of KnowWhereGraph, emphasizing the roles of space, place, and time in bridging various data "silos". Additionally, we demonstrate multiple use cases where the proposed geospatial knowledge graph and its associated tools empower decision-makers to uncover insights that are often hidden within complex and poorly interoperable datasets.

In reasoning about sequential events it is natural to pose probabilistic queries such as "when will event A occur next" or "what is the probability of A occurring before B", with applications in areas such as user modeling, medicine, and finance. However, with machine learning shifting towards neural autoregressive models such as RNNs and transformers, probabilistic querying has been largely restricted to simple cases such as next-event prediction. This is in part due to the fact that future querying involves marginalization over large path spaces, which is not straightforward to do efficiently in such models. In this paper we introduce a general typology for predictive queries in neural autoregressive sequence models and show that such queries can be systematically represented by sets of elementary building blocks. We leverage this typology to develop new query estimation methods based on beam search, importance sampling, and hybrids. Across four large-scale sequence datasets from different application domains, as well as for the GPT-2 language model, we demonstrate the ability to make query answering tractable for arbitrary queries in exponentially-large predictive path-spaces, and find clear differences in cost-accuracy tradeoffs between search and sampling methods.

In many use-cases, information is stored in text but not available in structured data. However, extracting data from natural language text to precisely fit a schema, and thus enable querying, is a challenging task. With the rise of pre-trained Large Language Models (LLMs), there is now an effective solution to store and use information extracted from massive corpora of text documents. Thus, we envision the use of SQL queries to cover a broad range of data that is not captured by traditional databases by tapping the information in LLMs. To ground this vision, we present Galois, a prototype based on a traditional database architecture, but with new physical operators for querying the underlying LLM. The main idea is to execute some operators of the the query plan with prompts that retrieve data from the LLM. For a large class of SQL queries, querying LLMs returns well structured relations, with encouraging qualitative results. Preliminary experimental results make pre-trained LLMs a promising addition to the field of database systems, introducing a new direction for hybrid query processing. However, we pinpoint several research challenges that must be addressed to build a DBMS that exploits LLMs. While some of these challenges necessitate integrating concepts from the NLP literature, others offer novel research avenues for the DB community.

While structure-based relocalizers have long strived for point correspondences when establishing or regressing query-map associations, in this paper, we pioneer the use of planar primitives and 3D planar maps for lightweight 6-DoF camera relocalization in structured environments. Planar primitives, beyond being fundamental entities in projective geometry, also serve as region-based representations that encapsulate both structural and semantic richness. This motivates us to introduce PlanaReLoc, a streamlined plane-centric paradigm where a deep matcher associates planar primitives across the query image and the map within a learned unified embedding space, after which the 6-DoF pose is solved and refined under a robust framework. Through comprehensive experiments on the ScanNet and 12Scenes datasets across hundreds of scenes, our method demonstrates the superiority of planar primitives in facilitating reliable cross-modal structural correspondences and achieving effective camera relocalization without requiring realistically textured/colored maps, pose priors, or per-scene training. The code and data are available at https://github.com/3dv-casia/PlanaReLoc .

Geolocation, the task of identifying an image's location, requires complex reasoning and is crucial for navigation, monitoring, and cultural preservation. However, current methods often produce coarse, imprecise, and non-interpretable localization. A major challenge lies in the quality and scale of existing geolocation datasets. These datasets are typically small-scale and automatically constructed, leading to noisy data and inconsistent task difficulty, with images that either reveal answers too easily or lack sufficient clues for reliable inference. To address these challenges, we introduce a comprehensive geolocation framework with three key components: GeoComp, a large-scale dataset; GeoCoT, a novel reasoning method; and GeoEval, an evaluation metric, collectively designed to address critical challenges and drive advancements in geolocation research. At the core of this framework is GeoComp (Geolocation Competition Dataset), a large-scale dataset collected from a geolocation game platform involving 740K users over two years. It comprises 25 million entries of metadata and 3 million geo-tagged locations spanning much of the globe, with each location annotated thousands to tens of thousands of times by human users. The dataset offers diverse difficulty levels for detailed analysis and highlights key gaps in current models. Building on this dataset, we propose Geographical Chain-of-Thought (GeoCoT), a novel multi-step reasoning framework designed to enhance the reasoning capabilities of Large Vision Models (LVMs) in geolocation tasks. GeoCoT improves performance by integrating contextual and spatial cues through a multi-step process that mimics human geolocation reasoning. Finally, using the GeoEval metric, we demonstrate that GeoCoT significantly boosts geolocation accuracy by up to 25% while enhancing interpretability.

Answering complex queries on incomplete knowledge graphs is a challenging task where a model needs to answer complex logical queries in the presence of missing knowledge. Prior work in the literature has proposed to address this problem by designing architectures trained end-to-end for the complex query answering task with a reasoning process that is hard to interpret while requiring data and resource-intensive training. Other lines of research have proposed re-using simple neural link predictors to answer complex queries, reducing the amount of training data by orders of magnitude while providing interpretable answers. The neural link predictor used in such approaches is not explicitly optimised for the complex query answering task, implying that its scores are not calibrated to interact together. We propose to address these problems via CQD^{A}, a parameter-efficient score adaptation model optimised to re-calibrate neural link prediction scores for the complex query answering task. While the neural link predictor is frozen, the adaptation component -- which only increases the number of model parameters by 0.03% -- is trained on the downstream complex query answering task. Furthermore, the calibration component enables us to support reasoning over queries that include atomic negations, which was previously impossible with link predictors. In our experiments, CQD^{A} produces significantly more accurate results than current state-of-the-art methods, improving from 34.4 to 35.1 Mean Reciprocal Rank values averaged across all datasets and query types while using leq 30% of the available training query types. We further show that CQD^{A} is data-efficient, achieving competitive results with only 1% of the training complex queries, and robust in out-of-domain evaluations.

Geographic coordinates are common inputs in applied machine learning, but latitude and longitude describe position rather than the surrounding environment. Image-grounded location encoders learn this context from satellite or ground-level imagery; structured open map data offers another source of supervision whose utility for continuous coordinate encoders remains less explored. We introduce CartoVec, a coordinate encoder trained to predict Overture-derived land cover, land use, transportation, place and connectivity targets at multiple spatial scales, without image inputs or downstream-task labels. We evaluate frozen embeddings on Census outcomes, Airbnb prices and Philadelphia crime in the US Northeast using spatial block cross-validation. CartoVec has the highest mean performance on most Census outcomes and the highest average across the full suite, with several comparisons close across folds. The findings support open map data as a practical source of reusable location representations with a coordinate-to-vector interface that requires no map lookup at inference. The open-weight model is available at https://huggingface.co/gursoyfurkan/CartoVec.

Retrieval-augmented generation (RAG) has become a dominant paradigm for mitigating knowledge hallucination and staleness in large language models (LLMs) while preserving data security. By retrieving relevant evidence from private, domain-specific corpora and injecting it into carefully engineered prompts, RAG delivers trustworthy responses without the prohibitive cost of fine-tuning. Traditional retrieval-augmented generation (RAG) systems are text-only and often rely on a single storage backend, most commonly a vector database. In practice, this monolithic design suffers from unavoidable trade-offs: vector search captures semantic similarity yet loses global context; knowledge graphs excel at relational precision but struggle with recall; full-text indexes are fast and exact yet semantically blind; and relational engines such as MySQL provide strong transactional guarantees but no semantic understanding. We argue that these heterogeneous retrieval paradigms are complementary, and propose a principled fusion scheme to orchestrate them synergistically, mitigating the weaknesses of any single modality. In this work we introduce HetaRAG, a hybrid, deep-retrieval augmented generation framework that orchestrates cross-modal evidence from heterogeneous data stores. We plan to design a system that unifies vector indices, knowledge graphs, full-text engines, and structured databases into a single retrieval plane, dynamically routing and fusing evidence to maximize recall, precision, and contextual fidelity. To achieve this design goal, we carried out preliminary explorations and constructed an initial RAG pipeline; this technical report provides a brief overview. The partial code is available at https://github.com/KnowledgeXLab/HetaRAG.

Deep learning methods for Visual Place Recognition (VPR) have advanced significantly, largely driven by large-scale datasets. However, most existing approaches are trained on a single dataset, which can introduce dataset-specific inductive biases and limit model generalization. While multi-dataset joint training offers a promising solution for developing universal VPR models, divergences among training datasets can saturate limited information capacity in feature aggregation layers, leading to suboptimal performance. To address these challenges, we propose Query-based Adaptive Aggregation (QAA), a novel feature aggregation technique that leverages learned queries as reference codebooks to effectively enhance information capacity without significant computational or parameter complexity. We show that computing the Cross-query Similarity (CS) between query-level image features and reference codebooks provides a simple yet effective way to generate robust descriptors. Our results demonstrate that QAA outperforms state-of-the-art models, achieving balanced generalization across diverse datasets while maintaining peak performance comparable to dataset-specific models. Ablation studies further explore QAA's mechanisms and scalability. Visualizations reveal that the learned queries exhibit diverse attention patterns across datasets. Code will be publicly released.

Several data warehouse and database providers have recently introduced extensions to SQL called AI Queries, enabling users to specify functions and conditions in SQL that are evaluated by LLMs, thereby broadening significantly the kinds of queries one can express over the combination of structured and unstructured data. LLMs offer remarkable semantic reasoning capabilities, making them an essential tool for complex and nuanced queries that blend structured and unstructured data. While extremely powerful, these AI queries can become prohibitively costly when invoked thousands of times. This paper provides an extensive evaluation of a recent AI query approximation approach that enables low cost analytics and database applications to benefit from AI queries. The approach delivers >100x cost and latency reduction for the semantic filter operator and also important gains for semantic ranking. The cost and performance gains come from utilizing cheap and accurate proxy models over embedding vectors. We show that despite the massive gains in latency and cost, these proxy models preserve accuracy and occasionally improve accuracy across various benchmark datasets, including the extended Amazon reviews benchmark that has 10M rows. We present an OLAP-friendly architecture within Google BigQuery for this approach for purely online (ad hoc) queries, and a low-latency HTAP database-friendly architecture in AlloyDB that could further improve the latency by moving the proxy model training offline. We present techniques that accelerate the proxy model training.

Answering complex logical queries on incomplete knowledge graphs is a challenging task, and has been widely studied. Embedding-based methods require training on complex queries, and cannot generalize well to out-of-distribution query structures. Recent work frames this task as an end-to-end optimization problem, and it only requires a pretrained link predictor. However, due to the exponentially large combinatorial search space, the optimal solution can only be approximated, limiting the final accuracy. In this work, we propose QTO (Query Computation Tree Optimization) that can efficiently find the exact optimal solution. QTO finds the optimal solution by a forward-backward propagation on the tree-like computation graph, i.e., query computation tree. In particular, QTO utilizes the independence encoded in the query computation tree to reduce the search space, where only local computations are involved during the optimization procedure. Experiments on 3 datasets show that QTO obtains state-of-the-art performance on complex query answering, outperforming previous best results by an average of 22%. Moreover, QTO can interpret the intermediate solutions for each of the one-hop atoms in the query with over 90% accuracy. The code of our paper is at https://github.com/bys0318/QTO.

Retrieval-Augmented Generation (RAG) systems typically rely on a single fixed retriever, despite growing evidence that no single retriever performs optimally across all query types. In this paper, we explore a query routing approach that dynamically selects from a pool of retrievers based on the query, using both train-free heuristics and learned routing models. We frame routing as a learning-to-rank (LTR) problem and introduce LTRR, a framework that learns to rank retrievers by their expected utility gain to downstream LLM performance. Our experiments, conducted on synthetic QA data with controlled query type variations, show that routing-based RAG systems can outperform the best single-retriever-based systems. Performance gains are especially pronounced in models trained with the Answer Correctness (AC) metric and with pairwise learning approaches, especially with XGBoost. We also observe improvements in generalization to out-of-distribution queries. As part of the SIGIR 2025 LiveRAG challenge, our submitted system demonstrated the practical viability of our approach, achieving competitive performance in both answer correctness and faithfulness. These findings highlight the importance of both training methodology and metric selection in query routing for RAG systems.

Deep research agents integrate fragmented evidence through multi-step tool use. BrowseComp offers a text-only testbed for such agents, but existing multimodal benchmarks rarely require both weak visual cues composition and BrowseComp-style multi-hop verification. Geolocation is a natural testbed because answers depend on combining multiple ambiguous visual cues and validating them with open-web evidence. Thus, we introduce GeoBrowse, a geolocation benchmark that combines visual reasoning with knowledge-intensive multi-hop queries. Level 1 tests extracting and composing fragmented visual cues, and Level 2 increases query difficulty by injecting long-tail knowledge and obfuscating key entities. To support evaluation, we provide an agentic workflow GATE with five think-with-image tools and four knowledge-intensive tools, and release expert-annotated stepwise traces grounded in verifiable evidence for trajectory-level analysis. Experiments show that GATE outperforms direct inference and open-source agents, indicating that no-tool, search-only or image-only setups are insufficient. Gains come from coherent, level-specific tool-use plans rather than more tool calls, as they more reliably reach annotated key evidence steps and make fewer errors when integrating into the final decision. The GeoBrowse bernchmark and codes are provided in https://github.com/ornamentt/GeoBrowse

Semantic code search, retrieving code that matches a given natural language query, is an important task to improve productivity in software engineering. Existing code search datasets are problematic: either using unrealistic queries, or with mismatched codes, and typically using one-to-one query-code pairing, which fails to reflect the reality that a query might have multiple valid code matches. This paper introduces CoSQA+, pairing high-quality queries (reused from CoSQA) with multiple suitable codes. We collect code candidates from diverse sources and form candidate pairs by pairing queries with these codes. Utilizing the power of large language models (LLMs), we automate pair annotation, filtering, and code generation for queries without suitable matches. Through extensive experiments, CoSQA+ has demonstrated superior quality over CoSQA. Models trained on CoSQA+ exhibit improved performance. Furthermore, we propose a new metric Mean Multi-choice Reciprocal Rank (MMRR), to assess one-to-N code search performance. We provide the code and data at https://github.com/DeepSoftwareAnalytics/CoSQA_Plus.

The rapid growth of large language models (LLMs) with diverse capabilities, costs, and domains has created a critical need for intelligent model selection at inference time. While smaller models suffice for routine queries, complex tasks demand more capable models. However, static model deployment does not account for the complexity and domain of incoming queries, leading to suboptimal performance and increased costs. Dynamic routing systems that adaptively select models based on query characteristics have emerged as a solution to this challenge. We provide a systematic analysis of state-of-the-art multi-LLM routing and cascading approaches. In contrast to mixture-of-experts architectures, which route within a single model, we study routing across multiple independently trained LLMs. We cover diverse routing paradigms, including query difficulty, human preferences, clustering, uncertainty quantification, reinforcement learning, multimodality, and cascading. For each paradigm, we analyze representative methods and examine key trade-offs. Beyond taxonomy, we introduce a conceptual framework that characterizes routing systems along three dimensions: when decisions are made, what information is used, and how they are computed. This perspective highlights that practical systems are often compositional, integrating multiple paradigms under operational constraints. Our analysis demonstrates that effective multi-LLM routing requires balancing competing objectives. Choosing the optimal routing strategy depends on deployment and computational constraints. Well-designed routing systems can outperform even the most powerful individual models by strategically leveraging specialized capabilities across models while maximizing efficiency gains. Meanwhile, open challenges remain in developing routing mechanisms that generalize across diverse architectures, modalities, and applications.

Vector similarity search presents significant challenges in terms of scalability for large and high-dimensional datasets, as well as in providing native support for hybrid queries. Serverless computing and cloud functions offer attractive benefits such as elasticity and cost-effectiveness, but are difficult to apply to data-intensive workloads. Jointly addressing these two main challenges, we present SQUASH, the first fully serverless vector search solution with rich support for hybrid queries. It features OSQ, an optimized and highly parallelizable quantization-based approach for vectors and attributes. Its segment-based storage mechanism enables significant compression in resource-constrained settings and offers efficient dimensional extraction operations. SQUASH performs a single distributed pass to guarantee the return of sufficiently many vectors satisfying the filter predicate, achieving high accuracy and avoiding redundant computation for vectors which fail the predicate. A multi-level search workflow is introduced to prune most vectors early to minimize the load on Function-as-a-Service (FaaS) instances. SQUASH is designed to identify and utilize retention of relevant data in re-used runtime containers, which eliminates redundant I/O and reduces costs. Finally, we demonstrate a new tree-based method for rapid FaaS invocation, enabling the bi-directional flow of data via request/response payloads. Experiments comparing SQUASH with state-of-the-art serverless vector search solutions and server-based baselines on vector search benchmarks confirm significant performance improvements at a lower cost.

We present a geometric framework for filtered approximate nearest neighbor (ANN) search. Filtering a proximity graph by a metadata predicate produces a subgraph, a fiber, whose connectivity and geometry can differ sharply from the full graph. Using local signals, we propose a two-phase search algorithm that combines full-graph exploration with filtered-neighbor descent when the local geometry is favorable. These signals also classify search failures into three regimes: topological cuts, geometric folds, and genuine basins. A key observation is that all three share a common resolution: restarting the search in a fiber-present cluster near the query. To support this, we introduce a lightweight anchor structure that identifies such regions and restarts the search accordingly. We show empirically that the method outperforms FAISS HNSW on filtered search and the three failure regimes separate cleanly and shift predictably with filter selectivity.

Reliable spatial understanding is an important prerequisite for future medical vision-language systems that aim to support radiological report generation and structured image understanding. While modern vision-language models (VLMs) show promising performance on many medical imaging tasks, recent evidence suggests they remain weak in controlled spatial reasoning and often fail to reliably ground spatial relations in image evidence. Given that radiological reasoning hinges on understanding the relative positions of anatomical structures and findings, this spatial weakness poses risks to diagnostic accuracy. We present a modular medical imaging agent for binary spatial relation verification in axial CT slices. Instead of directly predicting spatial answers end-to-end, the system decomposes the task into explicit stages: language parsing, anatomical localization, and deterministic geometric verification. Natural-language queries are converted into structured relation tuples, queried organs are localized with a YOLO-based detector, and the final spatial decision is computed from object centers using deterministic geometric rules. We evaluate the approach on the held-out MIRP spatial QA benchmark and compare it against representative end-to-end VLM baselines. The best-performing hybrid configuration reaches 94.1% accuracy and 94.2% F1, outperforming direct Qwen2-VL prompting by 42.5 percentage points in accuracy, while preserving interpretable intermediate representations and auditable reasoning stages. The results suggest that explicit modular spatial verification can serve as a promising building block for future report-oriented medical imaging agents.

Multi-hop logical reasoning is an established problem in the field of representation learning on knowledge graphs (KGs). It subsumes both one-hop link prediction as well as other more complex types of logical queries. Existing algorithms operate only on classical, triple-based graphs, whereas modern KGs often employ a hyper-relational modeling paradigm. In this paradigm, typed edges may have several key-value pairs known as qualifiers that provide fine-grained context for facts. In queries, this context modifies the meaning of relations, and usually reduces the answer set. Hyper-relational queries are often observed in real-world KG applications, and existing approaches for approximate query answering cannot make use of qualifier pairs. In this work, we bridge this gap and extend the multi-hop reasoning problem to hyper-relational KGs allowing to tackle this new type of complex queries. Building upon recent advancements in Graph Neural Networks and query embedding techniques, we study how to embed and answer hyper-relational conjunctive queries. Besides that, we propose a method to answer such queries and demonstrate in our experiments that qualifiers improve query answering on a diverse set of query patterns.

Late-interaction multimodal retrieval models like ColPali achieve state-of-the-art document retrieval by embedding pages as images and computing fine-grained similarity between query tokens and visual patches. However, they return entire pages rather than specific regions, limiting utility for retrieval-augmented generation (RAG) where precise context is paramount. Conversely, OCR-based systems extract structured text with bounding box coordinates but lack semantic grounding for relevance assessment. We propose a hybrid architecture that unifies these paradigms: using ColPali's patch-level similarity scores as spatial relevance filters over OCR-extracted regions. We formalize the coordinate mapping between vision transformer patch grids and OCR bounding boxes, introduce intersection metrics for relevance propagation, and establish theoretical bounds on area efficiency. We evaluate on BBox-DocVQA with ground-truth bounding boxes. For within-page localization (given correct page retrieval), ColQwen3-4B with percentile-50 thresholding achieves 59.7% hit rate at IoU@0.5 (84.4% at IoU@0.25, 35.8% at IoU@0.7), with mean IoU of 0.569, compared to ~6.7% for random region selection. Our approach reduces context tokens by 28.8% compared to returning all OCR regions and by 52.3% compared to full-page image tokens. Our approach operates at inference time without additional training. We release Snappy, an open-source implementation at https://github.com/athrael-soju/Snappy.

Existing tool-augmented large language models (LLMs) encounter significant challenges when processing complex queries. Current frameworks such as ReAct are prone to local optimization traps due to their reliance on incremental decision-making processes. To address these limitations, we propose a novel Planner-centric Plan-Execute paradigm that fundamentally resolves local optimization bottlenecks through architectural innovation. Central to our approach is a novel Planner model that performs global Directed Acyclic Graph (DAG) planning for complex queries, enabling optimized execution beyond conventional tool coordination. We also introduce ComplexTool-Plan, a large-scale benchmark dataset featuring complex queries that demand sophisticated multi-tool composition and coordination capabilities. Additionally, we develop a two-stage training methodology that integrates Supervised Fine-Tuning (SFT) with Group Relative Policy Optimization (GRPO), systematically enhancing the Planner's tool selection accuracy and global planning awareness through structured DAG-based planning. When integrated with a capable executor, our framework achieves state-of-the-art performance on the StableToolBench benchmark for complex user queries, demonstrating superior end-to-end execution capabilities and robust handling of intricate multi-tool workflows.

The field of Computer-Aided Design (CAD) generation has made significant progress in recent years. Existing methods typically fall into two separate categories: parametric CAD modeling and direct boundary representation (B-Rep) synthesis. In modern feature-based CAD systems, parametric modeling and B-Rep are inherently intertwined, as advanced parametric operations (e.g., fillet and chamfer) require explicit selection of B-Rep geometric primitives, and the B-Rep itself is derived from parametric operations. Consequently, this paradigm gap remains a critical factor limiting AI-driven CAD modeling for complex industrial product design. This paper presents FutureCAD, a novel text-to-CAD framework that leverages large language models (LLMs) and a B-Rep grounding transformer (BRepGround) for high-fidelity CAD generation. Our method generates executable CadQuery scripts, and introduces a text-based query mechanism that enables the LLM to specify geometric selections via natural language, which BRepGround then grounds to the target primitives. To train our framework, we construct a new dataset comprising real-world CAD models. For the LLM, we apply supervised fine-tuning (SFT) to establish fundamental CAD generation capabilities, followed by reinforcement learning (RL) to improve generalization. Experiments show that FutureCAD achieves state-of-the-art CAD generation performance. Code and dataset are available at: https://github.com/JohanStackk/FutureCAD

Transformers excel at in-context retrieval but suffer from quadratic complexity with sequence length, while State Space Models (SSMs) offer efficient linear-time processing but have limited retrieval capabilities. We investigate whether hybrid architectures combining Transformers and SSMs can achieve the best of both worlds on two synthetic in-context retrieval tasks. The first task, n-gram retrieval, requires the model to identify and reproduce an n-gram that succeeds the query within the input sequence. The second task, position retrieval, presents the model with a single query token and requires it to perform a two-hop associative lookup: first locating the corresponding element in the sequence, and then outputting its positional index. Under controlled experimental conditions, we assess data efficiency, length generalization, robustness to out of domain training examples, and learned representations across Transformers, SSMs, and hybrid architectures. We find that hybrid models outperform SSMs and match or exceed Transformers in data efficiency and extrapolation for information-dense context retrieval. However, Transformers maintain superiority in position retrieval tasks. Through representation analysis, we discover that SSM-based models develop locality-aware embeddings where tokens representing adjacent positions become neighbors in embedding space, forming interpretable structures. This emergent property, absent in Transformers, explains both the strengths and limitations of SSMs and hybrids for different retrieval tasks. Our findings provide principled guidance for architecture selection based on task requirements and reveal fundamental differences in how Transformers and SSMs, and hybrid models learn positional associations.

The next Point-of-Interest (POI) recommendation task aims to predict users' next destinations based on their historical movement data and plays a key role in location-based services and personalized applications. Accurate next POI recommendation depends on effectively modeling geographic information and POI transition relations, which are crucial for capturing spatial dependencies and user movement patterns. While Large Language Models (LLMs) exhibit strong capabilities in semantic understanding and contextual reasoning, applying them to spatial tasks like next POI recommendation remains challenging. First, the infrequent nature of specific GPS coordinates makes it difficult for LLMs to model precise spatial contexts. Second, the lack of knowledge about POI transitions limits their ability to capture potential POI-POI relationships. To address these issues, we propose GA-LLM (Geography-Aware Large Language Model), a novel framework that enhances LLMs with two specialized components. The Geographic Coordinate Injection Module (GCIM) transforms GPS coordinates into spatial representations using hierarchical and Fourier-based positional encoding, enabling the model to understand geographic features from multiple perspectives. The POI Alignment Module (PAM) incorporates POI transition relations into the LLM's semantic space, allowing it to infer global POI relationships and generalize to unseen POIs. Experiments on three real-world datasets demonstrate the state-of-the-art performance of GA-LLM.

Recently similarity graphs became the leading paradigm for efficient nearest neighbor search, outperforming traditional tree-based and LSH-based methods. Similarity graphs perform the search via greedy routing: a query traverses the graph and in each vertex moves to the adjacent vertex that is the closest to this query. In practice, similarity graphs are often susceptible to local minima, when queries do not reach its nearest neighbors, getting stuck in suboptimal vertices. In this paper we propose to learn the routing function that overcomes local minima via incorporating information about the graph global structure. In particular, we augment the vertices of a given graph with additional representations that are learned to provide the optimal routing from the start vertex to the query nearest neighbor. By thorough experiments, we demonstrate that the proposed learnable routing successfully diminishes the local minima problem and significantly improves the overall search performance.

As humans, we regularly interpret images based on the relations between image regions. For example, a person riding object X, or a plank bridging two objects. Current methods provide limited support to search for images based on such relations. We present RAID, a relation-augmented image descriptor that supports queries based on inter-region relations. The key idea of our descriptor is to capture the spatial distribution of simple point-to-region relationships to describe more complex relationships between two image regions. We evaluate the proposed descriptor by querying into a large subset of the Microsoft COCO database and successfully extract nontrivial images demonstrating complex inter-region relations, which are easily missed or erroneously classified by existing methods.

Geometry problem solving has attracted much attention in the NLP community recently. The task is challenging as it requires abstract problem understanding and symbolic reasoning with axiomatic knowledge. However, current datasets are either small in scale or not publicly available. Thus, we construct a new large-scale benchmark, Geometry3K, consisting of 3,002 geometry problems with dense annotation in formal language. We further propose a novel geometry solving approach with formal language and symbolic reasoning, called Interpretable Geometry Problem Solver (Inter-GPS). Inter-GPS first parses the problem text and diagram into formal language automatically via rule-based text parsing and neural object detecting, respectively. Unlike implicit learning in existing methods, Inter-GPS incorporates theorem knowledge as conditional rules and performs symbolic reasoning step by step. Also, a theorem predictor is designed to infer the theorem application sequence fed to the symbolic solver for the more efficient and reasonable searching path. Extensive experiments on the Geometry3K and GEOS datasets demonstrate that Inter-GPS achieves significant improvements over existing methods. The project with code and data is available at https://lupantech.github.io/inter-gps.

Persistent memory is a central capability for AI agents, yet the mathematical foundations of memory retrieval, lifecycle management, and consistency remain unexplored. Current systems employ cosine similarity for retrieval, heuristic decay for salience, and provide no formal contradiction detection. We establish information-geometric foundations through three contributions. First, a retrieval metric derived from the Fisher information structure of diagonal Gaussian families, satisfying Riemannian metric axioms, invariant under sufficient statistics, and computable in O(d) time. Second, memory lifecycle formulated as Riemannian Langevin dynamics with proven existence and uniqueness of the stationary distribution via the Fokker-Planck equation, replacing hand-tuned decay with principled convergence guarantees. Third, a cellular sheaf model where non-trivial first cohomology classes correspond precisely to irreconcilable contradictions across memory contexts. On the LoCoMo benchmark, the mathematical layers yield +12.7 percentage points over engineering baselines across six conversations, reaching +19.9 pp on the most challenging dialogues. A four-channel retrieval architecture achieves 75% accuracy without cloud dependency. Cloud-augmented results reach 87.7%. A zero-LLM configuration satisfies EU AI Act data sovereignty requirements by architectural design. To our knowledge, this is the first work establishing information-geometric, sheaf-theoretic, and stochastic-dynamical foundations for AI agent memory systems.

Complex logical query answering (CLQA) is a recently emerged task of graph machine learning that goes beyond simple one-hop link prediction and solves a far more complex task of multi-hop logical reasoning over massive, potentially incomplete graphs in a latent space. The task received a significant traction in the community; numerous works expanded the field along theoretical and practical axes to tackle different types of complex queries and graph modalities with efficient systems. In this paper, we provide a holistic survey of CLQA with a detailed taxonomy studying the field from multiple angles, including graph types (modality, reasoning domain, background semantics), modeling aspects (encoder, processor, decoder), supported queries (operators, patterns, projected variables), datasets, evaluation metrics, and applications. Refining the CLQA task, we introduce the concept of Neural Graph Databases (NGDBs). Extending the idea of graph databases (graph DBs), NGDB consists of a Neural Graph Storage and a Neural Graph Engine. Inside Neural Graph Storage, we design a graph store, a feature store, and further embed information in a latent embedding store using an encoder. Given a query, Neural Query Engine learns how to perform query planning and execution in order to efficiently retrieve the correct results by interacting with the Neural Graph Storage. Compared with traditional graph DBs, NGDBs allow for a flexible and unified modeling of features in diverse modalities using the embedding store. Moreover, when the graph is incomplete, they can provide robust retrieval of answers which a normal graph DB cannot recover. Finally, we point out promising directions, unsolved problems and applications of NGDB for future research.

We show that crowd counting can be viewed as a decomposable point querying process. This formulation enables arbitrary points as input and jointly reasons whether the points are crowd and where they locate. The querying processing, however, raises an underlying problem on the number of necessary querying points. Too few imply underestimation; too many increase computational overhead. To address this dilemma, we introduce a decomposable structure, i.e., the point-query quadtree, and propose a new counting model, termed Point quEry Transformer (PET). PET implements decomposable point querying via data-dependent quadtree splitting, where each querying point could split into four new points when necessary, thus enabling dynamic processing of sparse and dense regions. Such a querying process yields an intuitive, universal modeling of crowd as both the input and output are interpretable and steerable. We demonstrate the applications of PET on a number of crowd-related tasks, including fully-supervised crowd counting and localization, partial annotation learning, and point annotation refinement, and also report state-of-the-art performance. For the first time, we show that a single counting model can address multiple crowd-related tasks across different learning paradigms. Code is available at https://github.com/cxliu0/PET.

Recent advances in large language models (LLMs) and dense retrievers have driven significant progress in retrieval-augmented generation (RAG). However, existing approaches face significant challenges in complex reasoning-oriented multi-hop retrieval tasks: 1) Ineffective reasoning-oriented planning: Prior methods struggle to generate robust multi-step plans for complex queries, as rule-based decomposers perform poorly on out-of-template questions. 2) Suboptimal reasoning-driven retrieval: Related methods employ limited query reformulation, leading to iterative retrieval loops that often fail to locate golden documents. 3) Insufficient reasoning-guided filtering: Prevailing methods lack the fine-grained reasoning to effectively filter salient information from noisy results, hindering utilization of retrieved knowledge. Fundamentally, these limitations all stem from the weak coupling between retrieval and reasoning in current RAG architectures. We introduce the Orchestrated Planner-Executor Reasoning Architecture (OPERA), a novel reasoning-driven retrieval framework. OPERA's Goal Planning Module (GPM) decomposes questions into sub-goals, which are executed by a Reason-Execute Module (REM) with specialized components for precise reasoning and effective retrieval. To train OPERA, we propose Multi-Agents Progressive Group Relative Policy Optimization (MAPGRPO), a novel variant of GRPO. Experiments on complex multi-hop benchmarks show OPERA's superior performance, validating both the MAPGRPO method and OPERA's design.

We present Text-to-OverpassQL, a task designed to facilitate a natural language interface for querying geodata from OpenStreetMap (OSM). The Overpass Query Language (OverpassQL) allows users to formulate complex database queries and is widely adopted in the OSM ecosystem. Generating Overpass queries from natural language input serves multiple use-cases. It enables novice users to utilize OverpassQL without prior knowledge, assists experienced users with crafting advanced queries, and enables tool-augmented large language models to access information stored in the OSM database. In order to assess the performance of current sequence generation models on this task, we propose OverpassNL, a dataset of 8,352 queries with corresponding natural language inputs. We further introduce task specific evaluation metrics and ground the evaluation of the Text-to-OverpassQL task by executing the queries against the OSM database. We establish strong baselines by finetuning sequence-to-sequence models and adapting large language models with in-context examples. The detailed evaluation reveals strengths and weaknesses of the considered learning strategies, laying the foundations for further research into the Text-to-OverpassQL task.

Recent advances in Large Language Models (LLMs) have led to dramatic improvements in question answering (QA). To address the challenge of evaluating QA systems, standardized benchmarks have been introduced. This work focuses on the problem of geospatial QA, where a large collection of geospatial data is available in the form of a spatial database or other forms. Existing work on geospatial QA benchmarks has various limitations, including a small number of questions, limited spatial predicates, narrow output types, and no multi-source reasoning. We present GS-QA, an extensible geospatial QA benchmark with 2,800 question-answer pairs across 28 templates on top of OpenStreetMap and Wikipedia data, covering a wide range of spatial objects, predicates (including directional and towards filtering), and answer types (entity names, locations, distances, directions, counts, and aggregated areas/lengths). A key feature of GS-QA is that some questions require combining information from multiple sources, e.g., geospatial information from OSM and factual information from Wikipedia. GS-QA includes a comprehensive evaluation methodology that combines text-based QA measures with geospatial-specific measures such as distance error and angular error. We implemented nine LLM-based geospatial QA baselines using three LLMs (GPT-4o, Claude Sonnet 4.6, and Ministral-3) with combinations of direct prompting, retrieval-augmented generation, and text-to-SQL. Our results show that existing solutions perform reasonably well on simple spatial predicates with entity name outputs, but accuracy degrades significantly for questions involving complex spatial predicates, numeric output types, and multi-source reasoning, demonstrating that geospatial QA remains a challenging open problem warranting further research.

Despite advances in large language model (LLM)-based natural language interfaces for databases, scaling to enterprise-level data catalogs remains an under-explored challenge. Prior works addressing this challenge rely on domain-specific fine-tuning - complicating deployment - and fail to leverage important semantic context contained within database metadata. To address these limitations, we introduce a component-based retrieval architecture that decomposes database schemas and metadata into discrete semantic units, each separately indexed for targeted retrieval. Our approach prioritizes effective table identification while leveraging column-level information, ensuring the total number of retrieved tables remains within a manageable context budget. Experiments demonstrate that our method maintains high recall and accuracy, with our system outperforming baselines over massive databases with varying structure and available metadata. Our solution enables practical text-to-SQL systems deployable across diverse enterprise settings without specialized fine-tuning, addressing a critical scalability gap in natural language database interfaces.

Recent retrieval-augmented generation (RAG) approaches have demonstrated strong capability in handling complex queries, yet current research overlooks a critical challenge: different retrievers require fundamentally different query formulation strategies for optimal performance. In this work, we present the first systematic analysis of how LLMs can learn to adapt their query formulation strategies for different retrievers via reinforcement learning (RL). Our empirical study reveals that RL effectively teaches an LLM to tailor its queries to specific retriever characteristics. We discover that different retrievers exhibit surprisingly distinct optimal query styles (e.g., descriptive vs. question-like), suggesting strategies learned for one retriever ineffective for another. We further show that performance can be enhanced by incorporating retriever-specific human guidance and by scaling model size. To facilitate learning over multi-retrieval-step trajectories, we introduce a branching-based rollout technique that improves training stability. Our work provides the first empirical evidence and actionable insights for building truly retriever-aware RAG systems. Code and resources are available at https://github.com/LCO-Embedding/Envs-aware-Information-Retrieval.

Self-attention gives LLMs fine-grained, query-dependent access to context, but dense token interactions incur quadratic prefill cost and a key--value cache growing with context length. Research thus spans explicit-memory compression, sparse access, recurrent state construction, structured state dynamics, and heterogeneous mechanism composition. This survey analyzes these developments as model-internal contextual memory. We introduce a five-dimensional lens---Memory Representation, Memory Update, Access, Readout, and Integration---describing what is represented, how it changes, what is query-eligible, how it is read, and how readouts form outputs. This lens compares overlapping research lines without imposing one computational model. We reconstruct mechanism-level developments and architectural adoption using 59 release-level records from 14 major model lineages and 11 high-performing open-weight endpoints. First, explicit-memory and recurrent-state methods retain distinct interfaces but increasingly control overlapping memory functions. Second, heterogeneous architectures increasingly coordinate across network depth: layer-wise composition distributes complementary memory processing across representational stages, while cross-layer reuse carries selected memory and routing artifacts forward. Depth thus becomes a dimension along which contextual memory is constructed and managed. Third, these developments motivate a stateful multidimensional memory-routing hypothesis: persistent memory is organized across temporal scope, network depth, substrate type, and representation granularity, while coordinated Sparse Write and Sparse Read determine what is maintained and what contributes to each query. Overall, efficient sequence architecture design increasingly concerns the organization, lifecycle, and selective use of contextual memory rather than an isolated Attention operator.

Multimodal large language models (MLLMs) have exhibited remarkable performance in various visual tasks, yet still struggle with spatial reasoning. Recent efforts mitigate this by injecting geometric features from 3D foundation models, but rely on static single-layer extractions. We identify that such an approach induces a task misalignment bias: the geometric features naturally evolve towards 3D pretraining objectives, which may contradict the heterogeneous spatial demands of MLLMs, rendering any single layer fundamentally insufficient. To resolve this, we propose GeoAlign, a novel framework that dynamically aggregates multi-layer geometric features to realign with the actual demands. GeoAlign constructs a hierarchical geometric feature bank and leverages the MLLM's original visual tokens as content-aware queries to perform layer-wise sparse routing, adaptively fetching the suitable geometric features for each patch. Extensive experiments on VSI-Bench, ScanQA, and SQA3D demonstrate that our compact 4B model effectively achieves state-of-the-art performance, even outperforming larger existing MLLMs.

Spatial understanding of the physical world from 2D visual inputs hinges on two complementary forms of geometric knowledge: holistic 3D structural perception and fine-grained metric scale estimation. Existing multimodal large language models (MLLMs) typically address only one facet, ingesting either depth maps or point clouds as additional model inputs, which incurs substantial computational overhead and inherits the generalization limitations of upstream prediction models. We propose GAMSI, a dual-pathway Geometry-Aware MLLM for Spatial Intelligence that takes only RGB images as input while internalizing both forms of geometric prior within a unified autoregressive backbone. Specifically, we introduce Metric-Structure Decoupled Queries (MSDQ) which employ two groups of learnable queries to respectively extract dense metric signals and sparse structural cues from the shared visual context, with a task-decoupled attention mask further preventing the two pathways from contaminating each other. Building on this, an Expert-Guided Visual Grounding (EVG) module projects the aggregated cues back to frame-level visual features and aligns them with vision foundation models, which serve purely as training-time supervision, rather than as model inputs. We further build a multi-task spatial instruction-tuning dataset (MTS) comprising 152{,}776 samples spanning 13 task types and three visual modalities, consolidated from six public datasets. Trained with a two-stage curriculum, GAMSI achieves state-of-the-art performance on seven spatial intelligence benchmarks.

There is an increasing adoption of machine learning for encoding data into vectors to serve online recommendation and search use cases. As a result, recent data management systems propose augmenting query processing with online vector similarity search. In this work, we explore vector similarity search in the context of Knowledge Graphs (KGs). Motivated by the tasks of finding related KG queries and entities for past KG query workloads, we focus on hybrid vector similarity search (hybrid queries for short) where part of the query corresponds to vector similarity search and part of the query corresponds to predicates over relational attributes associated with the underlying data vectors. For example, given past KG queries for a song entity, we want to construct new queries for new song entities whose vector representations are close to the vector representation of the entity in the past KG query. But entities in a KG also have non-vector attributes such as a song associated with an artist, a genre, and a release date. Therefore, suggested entities must also satisfy query predicates over non-vector attributes beyond a vector-based similarity predicate. While these tasks are central to KGs, our contributions are generally applicable to hybrid queries. In contrast to prior works that optimize online queries, we focus on enabling efficient batch processing of past hybrid query workloads. We present our system, HQI, for high-throughput batch processing of hybrid queries. We introduce a workload-aware vector data partitioning scheme to tailor the vector index layout to the given workload and describe a multi-query optimization technique to reduce the overhead of vector similarity computations. We evaluate our methods on industrial workloads and demonstrate that HQI yields a 31x improvement in throughput for finding related KG queries compared to existing hybrid query processing approaches.

In this paper, we introduce MapBench-the first dataset specifically designed for human-readable, pixel-based map-based outdoor navigation, curated from complex path finding scenarios. MapBench comprises over 1600 pixel space map path finding problems from 100 diverse maps. In MapBench, LVLMs generate language-based navigation instructions given a map image and a query with beginning and end landmarks. For each map, MapBench provides Map Space Scene Graph (MSSG) as an indexing data structure to convert between natural language and evaluate LVLM-generated results. We demonstrate that MapBench significantly challenges state-of-the-art LVLMs both zero-shot prompting and a Chain-of-Thought (CoT) augmented reasoning framework that decomposes map navigation into sequential cognitive processes. Our evaluation of both open-source and closed-source LVLMs underscores the substantial difficulty posed by MapBench, revealing critical limitations in their spatial reasoning and structured decision-making capabilities. We release all the code and dataset in https://github.com/taco-group/MapBench.

Navigating complex, densely packed environments like retail stores, warehouses, and hospitals poses a significant spatial grounding challenge for humans and embodied AI. In these spaces, dense visual features quickly become stale given the quasi-static nature of items, and long-tail semantic distributions challenge traditional computer vision. While Vision-Language Models (VLMs) help assistive systems navigate semantically-rich spaces, they still struggle with spatial grounding in cluttered environments. We present GIST (Grounded Intelligent Semantic Topology), a multimodal knowledge extraction pipeline that transforms a consumer-grade mobile point cloud into a semantically annotated navigation topology. Our architecture distills the scene into a 2D occupancy map, extracts its topological layout, and overlays a lightweight semantic layer via intelligent keyframe and semantic selection. We demonstrate the versatility of this structured spatial knowledge through critical downstream Human-AI interaction tasks: (1) an intent-driven Semantic Search engine that actively infers categorical alternatives and zones when exact matches fail; (2) a one-shot Semantic Localizer achieving a 1.04 m top-5 mean translation error; (3) a Zone Classification module that segments the walkable floor plan into high-level semantic regions; and (4) a Visually-Grounded Instruction Generator that synthesizes optimal paths into egocentric, landmark-rich natural language routing. In multi-criteria LLM evaluations, GIST outperforms sequence-based instruction generation baselines. Finally, an in-situ formative evaluation (N=5) yields an 80% navigation success rate relying solely on verbal cues, validating the system's capacity for universal design.

Determining the exact latitude and longitude that a photo was taken is a useful and widely applicable task, yet it remains exceptionally difficult despite the accelerated progress of other computer vision tasks. Most previous approaches have opted to learn a single representation of query images, which are then classified at different levels of geographic granularity. These approaches fail to exploit the different visual cues that give context to different hierarchies, such as the country, state, and city level. To this end, we introduce an end-to-end transformer-based architecture that exploits the relationship between different geographic levels (which we refer to as hierarchies) and the corresponding visual scene information in an image through hierarchical cross-attention. We achieve this by learning a query for each geographic hierarchy and scene type. Furthermore, we learn a separate representation for different environmental scenes, as different scenes in the same location are often defined by completely different visual features. We achieve state of the art street level accuracy on 4 standard geo-localization datasets : Im2GPS, Im2GPS3k, YFCC4k, and YFCC26k, as well as qualitatively demonstrate how our method learns different representations for different visual hierarchies and scenes, which has not been demonstrated in the previous methods. These previous testing datasets mostly consist of iconic landmarks or images taken from social media, which makes them either a memorization task, or biased towards certain places. To address this issue we introduce a much harder testing dataset, Google-World-Streets-15k, comprised of images taken from Google Streetview covering the whole planet and present state of the art results. Our code will be made available in the camera-ready version.

Learning 3D scene geometry and semantics from images is a core challenge in computer vision and a key capability for autonomous driving. Since large-scale 3D annotation is prohibitively expensive, recent work explores self-supervised learning directly from sensor data without manual labels. Existing approaches either rely on 2D rendering consistency, where 3D structure emerges only implicitly, or on discretized voxel grids from accumulated lidar point clouds, limiting spatial precision and scalability. We introduce QueryOcc, a query-based self-supervised framework that learns continuous 3D semantic occupancy directly through independent 4D spatio-temporal queries sampled across adjacent frames. The framework supports supervision from either pseudo-point clouds derived from vision foundation models or raw lidar data. To enable long-range supervision and reasoning under constant memory, we introduce a contractive scene representation that preserves near-field detail while smoothly compressing distant regions. QueryOcc surpasses previous camera-based methods by 26% in semantic RayIoU on the self-supervised Occ3D-nuScenes benchmark while running at 11.6 FPS, demonstrating that direct 4D query supervision enables strong self-supervised occupancy learning. https://research.zenseact.com/publications/queryocc/

Significant advancements have been achieved in the realm of understanding poses and interactions of two hands manipulating an object. The emergence of augmented reality (AR) and virtual reality (VR) technologies has heightened the demand for real-time performance in these applications. However, current state-of-the-art models often exhibit promising results at the expense of substantial computational overhead. In this paper, we present a query-optimized real-time Transformer (QORT-Former), the first Transformer-based real-time framework for 3D pose estimation of two hands and an object. We first limit the number of queries and decoders to meet the efficiency requirement. Given limited number of queries and decoders, we propose to optimize queries which are taken as input to the Transformer decoder, to secure better accuracy: (1) we propose to divide queries into three types (a left hand query, a right hand query and an object query) and enhance query features (2) by using the contact information between hands and an object and (3) by using three-step update of enhanced image and query features with respect to one another. With proposed methods, we achieved real-time pose estimation performance using just 108 queries and 1 decoder (53.5 FPS on an RTX 3090TI GPU). Surpassing state-of-the-art results on the H2O dataset by 17.6% (left hand), 22.8% (right hand), and 27.2% (object), as well as on the FPHA dataset by 5.3% (right hand) and 10.4% (object), our method excels in accuracy. Additionally, it sets the state-of-the-art in interaction recognition, maintaining real-time efficiency with an off-the-shelf action recognition module.

Recent advances in deep learning-based point cloud registration have improved generalization, yet most methods still require retraining or manual parameter tuning for each new environment. In this paper, we identify three key factors limiting generalization: (a) reliance on environment-specific voxel size and search radius, (b) poor out-of-domain robustness of learning-based keypoint detectors, and (c) raw coordinate usage, which exacerbates scale discrepancies. To address these issues, we present a zero-shot registration pipeline called BUFFER-X by (a) adaptively determining voxel size/search radii, (b) using farthest point sampling to bypass learned detectors, and (c) leveraging patch-wise scale normalization for consistent coordinate bounds. In particular, we present a multi-scale patch-based descriptor generation and a hierarchical inlier search across scales to improve robustness in diverse scenes. We also propose a novel generalizability benchmark using 11 datasets that cover various indoor/outdoor scenarios and sensor modalities, demonstrating that BUFFER-X achieves substantial generalization without prior information or manual parameter tuning for the test datasets. Our code is available at https://github.com/MIT-SPARK/BUFFER-X.

Cross-view geo-localization estimates the geographic location of a ground image by matching it against an aerial image database. Existing methods tackle this through either large-scale retrieval or precise pose estimation, but not both: retrieval-based methods enable wide-area search at the cost of localization accuracy, while pose estimation methods achieve high precision within only a narrow search space. Naively cascading these pipelines introduces error propagation and inconsistent feature representations. We formulate cross-view geo-localization as a unified problem requiring simultaneous city-scale retrieval and precise 3-DoF pose estimation. We propose CIPER (Cross-view Image-retrieval and Pose-estimation transformER), a single architecture that jointly performs both tasks through mutually beneficial feature learning. CIPER uses a shared transformer encoder with task-specific tokens to disentangle global retrieval features from spatial localization cues. To bridge the large domain gap between ground and aerial views, we introduce a two-way transformer pose decoder that uses ground features as spatial queries for bidirectional cross-attention. A set prediction strategy further enables stable 3-DoF regression under a unified multi-task objective. Experiments on VIGOR, KITTI, and Ford Multi-AV demonstrate competitive performance, especially under limited field-of-view and arbitrary orientation conditions. Code is available at https://github.com/yurimjeon1892/CIPER.

Reasoning language models have demonstrated remarkable performance on many challenging tasks in math, science, and coding. Choosing the right reasoning model for practical deployment involves a performance and cost tradeoff at two key levels: model size and reasoning budget, where larger models and higher reasoning budget lead to better performance but with increased cost and latency. In this work, we tackle this tradeoff from the angle of model configuration routing for different queries, and present RADAR (Reasoning-Ability and Difficulty-Aware Routing), a lightweight, interpretable, and scalable routing framework. Inspired by psychometrics, RADAR learns an item response model from model responses with different budgets to different queries, with interpretable parameters including query difficulties and model-budget abilities. RADAR then routes queries with higher difficulty to model-budget pairs with higher ability, and vice versa. We conduct extensive experiments on 8 widely used challenging reasoning benchmarks, demonstrating the superior performance of RADAR compared to state-of-the-art model routing methods. RADAR also exhibits query generalization capabilities, showing strong performance on out-of-distribution queries in all benchmarks. RADAR is also scalable and can efficiently integrate additional models by dynamically selecting a small set of evaluation queries to estimate their abilities.

3D plane recovery from a single image can usually be divided into several subtasks of plane detection, segmentation, parameter estimation and possibly depth estimation. Previous works tend to solve this task by either extending the RCNN-based segmentation network or the dense pixel embedding-based clustering framework. However, none of them tried to integrate above related subtasks into a unified framework but treat them separately and sequentially, which we suspect is potentially a main source of performance limitation for existing approaches. Motivated by this finding and the success of query-based learning in enriching reasoning among semantic entities, in this paper, we propose PlaneRecTR, a Transformer-based architecture, which for the first time unifies all subtasks related to single-view plane recovery with a single compact model. Extensive quantitative and qualitative experiments demonstrate that our proposed unified learning achieves mutual benefits across subtasks, obtaining a new state-of-the-art performance on public ScanNet and NYUv2-Plane datasets. Codes are available at https://github.com/SJingjia/PlaneRecTR.

Existing Vision Language Models (VLMs) architecturally rooted in "flatland" perception, fundamentally struggle to comprehend real-world 3D spatial intelligence. This failure stems from a dual-bottleneck: input-stage conflict between computationally exorbitant geometric-aware encoders and superficial 2D-only features, and output-stage misalignment where discrete tokenizers are structurally incapable of producing precise, continuous numerical values. To break this impasse, we introduce GEODE (Geometric-Output and Decoupled-Input Engine), a novel architecture that resolves this dual-bottleneck by decoupling 3D reasoning from numerical generation. GEODE augments main VLM with two specialized, plug-and-play modules: Decoupled Rationale Module (DRM) that acts as spatial co-processor, aligning explicit 3D data with 2D visual features via cross-attention and distilling spatial Chain-of-Thought (CoT) logic into injectable Rationale Tokens; and Direct Regression Head (DRH), an "Embedding-as-Value" paradigm which routes specialized control tokens to a lightweight MLP for precise, continuous regression of scalars and 3D bounding boxes. The synergy of these modules allows our 1.5B parameter model to function as a high-level semantic dispatcher, achieving state-of-the-art spatial reasoning performance that rivals 7B+ models.

The rapid advancement of large language models (LLMs) and domain-specific AI agents has greatly expanded the ecosystem of AI-powered services. User queries, however, are highly diverse and often span multiple domains and task types, resulting in a complex and heterogeneous landscape. This diversity presents a fundamental routing challenge: how to accurately direct each query to an appropriate execution unit while optimizing both performance and efficiency. To address this, we propose MoMA (Mixture of Models and Agents), a generalized routing framework that integrates both LLM and agent-based routing. Built upon a deep understanding of model and agent capabilities, MoMA effectively handles diverse queries through precise intent recognition and adaptive routing strategies, achieving an optimal balance between efficiency and cost. Specifically, we construct a detailed training dataset to profile the capabilities of various LLMs under different routing model structures, identifying the most suitable tasks for each LLM. During inference, queries are dynamically routed to the LLM with the best cost-performance efficiency. We also introduce an efficient agent selection strategy based on a context-aware state machine and dynamic masking. Experimental results demonstrate that the MoMA router offers superior cost-efficiency and scalability compared to existing approaches.

Large Language Model agents increasingly operate external systems through programmatic interfaces, yet practitioners lack empirical guidance on how to structure the context these agents consume. Using SQL generation as a proxy for programmatic agent operations, we present a systematic study of context engineering for structured data, comprising 9,649 experiments across 11 models, 4 formats (YAML, Markdown, JSON, Token-Oriented Object Notation [TOON]), and schemas ranging from 10 to 10,000 tables. Our findings challenge common assumptions. First, architecture choice is model-dependent: file-based context retrieval improves accuracy for frontier-tier models (Claude, GPT, Gemini; +2.7%, p=0.029) but shows mixed results for open source models (aggregate -7.7%, p<0.001), with deficits varying substantially by model. Second, format does not significantly affect aggregate accuracy (chi-squared=2.45, p=0.484), though individual models, particularly open source, exhibit format-specific sensitivities. Third, model capability is the dominant factor, with a 21 percentage point accuracy gap between frontier and open source tiers that dwarfs any format or architecture effect. Fourth, file-native agents scale to 10,000 tables through domain-partitioned schemas while maintaining high navigation accuracy. Fifth, file size does not predict runtime efficiency: compact or novel formats can incur a token overhead driven by grep output density and pattern unfamiliarity, with the magnitude depending on model capability. These findings provide practitioners with evidence-based guidance for deploying LLM agents on structured systems, demonstrating that architectural decisions should be tailored to model capability rather than assuming universal best practices.

Existing GUI agent models relying on coordinate-based one-step visual grounding struggle with generalizing to varying input resolutions and aspect ratios. Alternatives introduce coordinate-free strategies yet suffer from learning under severe data scarcity. To address the limitations, we propose ToolTok, a novel paradigm of multi-step pathfinding for GUI agents, where operations are modeled as a sequence of progressive tool usage. Specifically, we devise tools aligned with human interaction habits and represent each tool using learnable token embeddings. To enable efficient embedding learning under limited supervision, ToolTok introduces a semantic anchoring mechanism that grounds each tool with semantically related concepts as natural inductive bias. To further enable a pre-trained large language model to progressively acquire tool semantics, we construct an easy-to-hard curriculum consisting of three tasks: token definition question-answering, pure text-guided tool selection, and simplified visual pathfinding. Extensive experiments on multiple benchmarks show that ToolTok achieves superior performance among models of comparable scale (4B) and remains competitive with a substantially larger model (235B). Notably, these results are obtained using less than 1% of the training data required by other post-training approaches. In addition, ToolTok demonstrates strong generalization across unseen scenarios. Our training & inference code is open-source at https://github.com/ZephinueCode/ToolTok.

Many real-world questions over business, legal, and scientific corpora are natural-language versions of database-style queries over records latent in text. Existing retrieval-augmented generation (RAG) systems are optimized primarily for semantic relevance, but retrieving plausible passages does not guarantee correct query execution. We introduce QO-Bench, a diagnostic benchmark for query-operator question answering over typed event tuples. The benchmark covers 22,984 news articles and 614 corporate events across 18 query templates, evaluated on 785 questions. Each gold answer is deterministically computed from typed event tuples and scored by recall, with answers matched to the gold tuples by exact match rather than an LLM judge. This design enables operator-level diagnosis such as joins and intersection. We evaluate RAG, ReAct RAG, GraphRAG, and information-extraction-to-SQL under matched conditions, with a long-context oracle ceiling to isolate retrieval failure. A two-axis framework -- index-time preservation versus query-time execution -- predicts where each paradigm fails, and the results bear it out: systems retrieve relevant text but discard the typed values operators need, and the deployable paradigm ranking inverts across operators, with similarity retrieval leading on filter/project and extraction-to-SQL on intersection and counting. Even given the gold evidence, a long-context oracle stays far from saturated, so operator execution -- not retrieval alone -- is a core bottleneck that a stronger answer model does not remove. QO-Bench reframes the goal from passage relevance to query-operator-preserving retrieval.

Spatial reasoning is a cornerstone capability for intelligent systems to perceive and interact with the physical world. However, multimodal large language models (MLLMs) frequently suffer from hallucinations and imprecision when parsing complex geometric layouts. As data-driven scaling struggles to internalize structured geometric priors and spatial constraints, integrating mature, specialized vision models presents a compelling alternative. Despite its promise, applying this paradigm to spatial reasoning is hindered by two key challenges: The difficulty of invoking heterogeneous, parameter-rich tools, as well as the challenge of understanding and effectively leveraging their diverse low-level outputs (e.g., segmentation masks, depth maps) in high-level reasoning. To address these challenges, we propose LAST, a unified framework for tool-augmented spatial reasoning. LAST features an extensible interactive sandbox, termed LAST-Box, which abstracts heterogeneous tool invocations into atomic instructions and reusable spatial skills, returning multimodal hints (e.g., annotated images and textual descriptions) that can be directly consumed by LLMs. We further design a three-stage progressive training strategy that guides models from understanding tool outputs to proficient and adaptive tool invocation. Experiments on four datasets show that LAST-7B achieves around 20\% performance gains over its backbone and outperforms strong proprietary closed-source LLMs, substantially enhancing reasoning on complex spatial tasks.

Place recognition is a key module for long-term SLAM systems. Current LiDAR-based place recognition methods usually use representations of point clouds such as unordered points or range images. These methods achieve high recall rates of retrieval, but their performance may degrade in the case of view variation or scene changes. In this work, we explore the potential of a different representation in place recognition, i.e. bird's eye view (BEV) images. We observe that the structural contents of BEV images are less influenced by rotations and translations of point clouds. We validate that, without any delicate design, a simple VGGNet trained on BEV images achieves comparable performance with the state-of-the-art place recognition methods in scenes of slight viewpoint changes. For more robust place recognition, we design a rotation-invariant network called BEVPlace. We use group convolution to extract rotation-equivariant local features from the images and NetVLAD for global feature aggregation. In addition, we observe that the distance between BEV features is correlated with the geometry distance of point clouds. Based on the observation, we develop a method to estimate the position of the query cloud, extending the usage of place recognition. The experiments conducted on large-scale public datasets show that our method 1) achieves state-of-the-art performance in terms of recall rates, 2) is robust to view changes, 3) shows strong generalization ability, and 4) can estimate the positions of query point clouds. Source codes are publicly available at https://github.com/zjuluolun/BEVPlace.

Object detection has long been dominated by traditional coordinate regression-based models, such as YOLO, DETR, and Grounding DINO. Although recent efforts have attempted to leverage MLLMs to tackle this task, they face challenges like low recall rate, duplicate predictions, coordinate misalignment, etc. In this work, we bridge this gap and propose Rex-Omni, a 3B-scale MLLM that achieves state-of-the-art object perception performance. On benchmarks like COCO and LVIS, Rex-Omni attains performance comparable to or exceeding regression-based models (e.g., DINO, Grounding DINO) in a zero-shot setting. This is enabled by three key designs: 1) Task Formulation: we use special tokens to represent quantized coordinates from 0 to 999, reducing the model's learning difficulty and improving token efficiency for coordinate prediction; 2) Data Engines: we construct multiple data engines to generate high-quality grounding, referring, and pointing data, providing semantically rich supervision for training; \3) Training Pipelines: we employ a two-stage training process, combining supervised fine-tuning on 22 million data with GRPO-based reinforcement post-training. This RL post-training leverages geometry-aware rewards to effectively bridge the discrete-to-continuous coordinate prediction gap, improve box accuracy, and mitigate undesirable behaviors like duplicate predictions that stem from the teacher-guided nature of the initial SFT stage. Beyond conventional detection, Rex-Omni's inherent language understanding enables versatile capabilities such as object referring, pointing, visual prompting, GUI grounding, spatial referring, OCR and key-pointing, all systematically evaluated on dedicated benchmarks. We believe that Rex-Omni paves the way for more versatile and language-aware visual perception systems.