Daily Papers

Detailed captions transfer visual information into vision-language model supervision, but quality is easily conflated with length: long single-pass outputs still miss small objects, text, and spatial relations or promote uncertain observations into confident claims. We formulate fine-grained captioning as recoverable visual information transfer, in which a teacher acquires missing evidence under a finite observation budget and converts it into reusable supervision. ZoomCap uses a draft caption to route conditional knowledge retrieval, OCR-sensitive reading, coverage-gap recovery, and adaptive visual zooming, allocating deeper crops only to the most complex eligible region, deriving spatial relations from grounded geometry, and fusing non-duplicate evidence. We also introduce FactCycle, which scores caption-derived atomic claims on two blind anchors--source image (truthfulness) and reconstruction (realizability)--separating fabrication from generator loss claim by claim; human and multi-judge comparisons complement this fact-level view. Against Qwen3.5-397B-A17B captions, ZoomCap achieves an 81.9% human tie-adjusted preference score with a teacher over 10x smaller, and FactCycle counts 52.4 transferred claims per image vs. 31.5 for ScaleCap. The evidence also transfers: in continual pre-training, ZoomCap-450K improves the 11-benchmark average by 1.31-2.38 points over the strongest competing corpus and Ling-Tiny-VL-v3 gains 1.4 points on a production document/OCR monitor suite (1.5 on perception) at 60B tokens; in medical pre-training, 2.64M ZoomCap-captioned images improve five VQA benchmarks by 3.04 points (vs. 1.76 for same-image Gemini-3.1-Pro captions).

Human supervisors rely on coding agents' reports to assess progress, verify repairs, and decide when to intervene. But a supervisor cannot investigate a failure they were never told occurred. Failed attempts, workarounds, and unresolved risks may disappear from routine reports, leaving supervisors unaware of issues that warrant scrutiny. We conduct CTXGAP, a measurement study quantifying the gap in task-state recoverability between agents' accumulated user-facing reports and their full recorded execution contexts. Across 37 coding tasks and 4,799 valid probes, agents answer 93.6% of task-state questions on demand; full-context readers recover 92.7%, while report-only readers recover 52.0%, a 40.7-point gap. At the final checkpoints of 30 verified fixes, the gap remains 34.8 points. Human annotation identifies states mentioned without enough supporting detail as the largest category of unrecovered information, and model-assessed supervision-relevant states retain substantial gaps. Full terminal scrollback improves recovery to 73.6% but still trails full context. Under matched report lengths, context-informed rewrites improve recovery by about eight points, without a detectable targeted-over-natural advantage. Positive gaps persist across harnesses and independent DeepSeek execution and measurement. CTXGAP establishes report-based task-state recoverability as a complementary evaluation dimension.

Audio inpainting aims to reconstruct missing segments in corrupted recordings. Most of existing methods produce plausible reconstructions when the gap lengths are short, but struggle to reconstruct gaps larger than about 100 ms. This paper explores recent advancements in deep learning and, particularly, diffusion models, for the task of audio inpainting. The proposed method uses an unconditionally trained generative model, which can be conditioned in a zero-shot fashion for audio inpainting, and is able to regenerate gaps of any size. An improved deep neural network architecture based on the constant-Q transform, which allows the model to exploit pitch-equivariant symmetries in audio, is also presented. The performance of the proposed algorithm is evaluated through objective and subjective metrics for the task of reconstructing short to mid-sized gaps, up to 300 ms. The results of a formal listening test show that the proposed method delivers comparable performance against the compared baselines for short gaps, such as 50 ms, while retaining a good audio quality and outperforming the baselines for wider gaps that are up to 300 ms long. The method presented in this paper can be applied to restoring sound recordings that suffer from severe local disturbances or dropouts, which must be reconstructed.

LLM coding agents issue Bash commands through interfaces that may serialize, wrap, and reparse model output. Matched execution scores alone cannot distinguish command-generation errors from failures introduced after generation. QuoteBench measures this boundary with exact final-state validation on 56 one-shot tasks from 14 incident-derived families, crossing the generation contract with the execution transport around one deliberately unescaped added parser. Escaping at the interpolation point reproduces each replayed reply's raw-path outcome, so any recovery under a disclosed boundary must come from the model changing its generation. Across eight same-window configurations, replaying the same reply through the added parser lowers success by 55.4 to 73.2 percentage points; disclosure recovers 30.4 to 60.7 points for six configurations, and zero or slightly negative for the other two. Raw generation is nearly saturated at the frontier; boundary adaptation is what still separates models. GPT-5.6-sol's matched gap of -3.6 points hides -64.3 points of damage and +60.7 points of compensation. The deployment configuration reorders models: one reversal among 26 comparable pairs is unambiguous and four more sit on single-task margins. Evaluations of command-issuing agents should report the model configuration, generation contract, execution path, operating point, and final-state validator rather than treat a matched score as an intrinsic model property.

Recent domain generalization (DG) approaches typically use the hypothesis learned on source domains for inference on the unseen target domain. However, such a hypothesis can be arbitrarily far from the optimal one for the target domain, induced by a gap termed ``adaptivity gap''. Without exploiting the domain information from the unseen test samples, adaptivity gap estimation and minimization are intractable, which hinders us to robustify a model to any unknown distribution. In this paper, we first establish a generalization bound that explicitly considers the adaptivity gap. Our bound motivates two strategies to reduce the gap: the first one is ensembling multiple classifiers to enrich the hypothesis space, then we propose effective gap estimation methods for guiding the selection of a better hypothesis for the target. The other method is minimizing the gap directly by adapting model parameters using online target samples. We thus propose Domain-specific Risk Minimization (DRM). During training, DRM models the distributions of different source domains separately; for inference, DRM performs online model steering using the source hypothesis for each arriving target sample. Extensive experiments demonstrate the effectiveness of the proposed DRM for domain generalization with the following advantages: 1) it significantly outperforms competitive baselines on different distributional shift settings; 2) it achieves either comparable or superior accuracies on all source domains compared to vanilla empirical risk minimization; 3) it remains simple and efficient during training, and 4) it is complementary to invariant learning approaches.

People overthink; language models over-sample, and the extra effort can talk both into a worse answer. Reasoning systems answer a hard question by sampling it many times (test-time scaling), and the more they draw, the more often a correct answer turns up somewhere, so coverage, the fraction of problems with at least one correct try, climbs and appears to be progress. But a deployed system must return one answer, and choosing it, not knowing which try is right, is selection; selection is capped, and past a point extra samples only make the model surer of a confident mistake, even as every draw adds cost. The gap between climbing coverage and stalled selection, the identifiability gap, is the answer a model can produce but not pick. So the real question is not whether to sample but how far, and the answer is: not far. For picking an answer, the vote has already settled within a few dozen draws, the modal ceiling; for scoring a benchmark, sooner still, the correlation ceiling. Beyond that, extra draws cost compute and add nothing, and can even make the answer worse. This paper turns the cutoff into a single number, the effective number of samples, that any sampling run already reveals. The bottleneck is recognizing a right answer, not generating one.

Deep neural networks (DNN) have been widely applied in modern life, including critical domains like autonomous driving, making it essential to ensure the reliability and robustness of DNN-powered systems. As an analogy to code coverage metrics for testing conventional software, researchers have proposed neuron coverage metrics and coverage-driven methods to generate DNN test cases. However, Yan et al. doubt the usefulness of existing coverage criteria in DNN testing. They show that a coverage-driven method is less effective than a gradient-based method in terms of both uncovering defects and improving model robustness. In this paper, we conduct a replication study of the work by Yan et al. and extend the experiments for deeper analysis. A larger model and a dataset of higher resolution images are included to examine the generalizability of the results. We also extend the experiments with more test case generation techniques and adjust the process of improving model robustness to be closer to the practical life cycle of DNN development. Our experiment results confirm the conclusion from Yan et al. that coverage-driven methods are less effective than gradient-based methods. Yan et al. find that using gradient-based methods to retrain cannot repair defects uncovered by coverage-driven methods. They attribute this to the fact that the two types of methods use different perturbation strategies: gradient-based methods perform differentiable transformations while coverage-driven methods can perform additional non-differentiable transformations. We test several hypotheses and further show that even coverage-driven methods are constrained only to perform differentiable transformations, the uncovered defects still cannot be repaired by adversarial training with gradient-based methods. Thus, defensive strategies for coverage-driven methods should be further studied.

Variational Autoencoders (VAEs) frequently suffer from posterior collapse, a failure mode in which the approximate posterior converges to the prior, rendering the latent code uninformative. Despite extensive research, a unified account of why collapse occurs has remained an open question. We identify and formalize two logically independent but coupled causes. Gradient imbalance occurs when the decoder's reconstruction signal vanishes faster than the KL regularization pressure as the posterior widens. Information gap occurs when the stochastic sampling step discards a substantial fraction of the encoder's computed representation, attenuating decoder sensitivity and making collapse inexpensive. Both causes share the same collapse trajectory, and we show that the information gap is algebraically equivalent to mismatch between the aggregate posterior and the prior, unifying two pathologies. Subsequently, we introduce λ-VAE, which resolves both causes through a single modification to the reparameterization step: the sampling noise is scaled by per-dimension exponent, while the KL penalty retains the original posterior variance. This asymmetry shifts the stable training attractor away from the degenerate collapsed state, driving all latent dimensions toward the same equilibrium -- a mechanism we term variance equalization. A closed-form optimal exponent per dimension follows from a net information gain objective, with a single hyperparameter controlling the reconstruction-generation tradeoff. We validate on standard benchmarks (Binary MNIST, Binary Omniglot, CIFAR-10, CelebA-64), showing consistent reductions in collapsed dimensions, information capacity gains of up to 2.8times nats, and reconstruction quality improvements of up to +0.33 BPD.

Self-correction is particularly useful when a failure constrains the next repair. Coding agents benefit from this property because compilers, tests, and execution traces turn many failures into typed recovery signals, but broad language-agent tasks often expose only a coarse task failure. This creates a tension for generic recovery playbooks: they broaden the agent's context precisely when the system needs a narrower repair interface, mixing incompatible signals for invalid actions, missing procedures, and strict-format errors. Our insight is that development-set failures can recover part of the missing diagnostic substrate by deciding which recovery interventions are admissible before test-time correction. We propose DARC, a diagnosis-guided recovery harness that profiles task-family failure modes, prunes mismatched interventions from a shared recovery library, and freezes a verifier-selected success-cost policy for deployment. This causal order makes correction selective: the harness first determines what kind of failure can be repaired, then decides how much recovery evidence to spend. In ALFWorld, AppWorld, and XBRL Finance, the same protocol yields an action-validity harness, a procedural-recovery fallback, and a format-precision retrieval policy; in each evaluated setting it improves average task performance over base agents and broad playbooks while reducing environment steps or retrieval budget. Our experiments show that failures need not trigger uniformly more context: DARC turns self-correction from prompt expansion into recovery-interface design. DARC provides a practical route toward more reliable agents in domains where compiler-like feedback is absent: making failures actionable before making contexts larger.

Post-training quantization (PTQ) is widely used to reduce the cost of serving large language models (LLMs), but its accuracy cost is uneven and is often tuned per model. We study where quantization damage occurs and how to allocate a small additional precision budget. Using causal mixed-precision intervention as ground truth (raise each layer to 8-bit in turn and measure the accuracy it recovers) across 9 open-weight models in 4 architecture families, we test 3 intuitive hypotheses: that quantization damage lives in task circuits, where the model computes, or in weight statistics. None of them predicts which layers benefit from restored precision. Recovery is instead diffuse: for 8 of 9 models, recovering 75% of the gap takes roughly half the layers; the lone exception, Qwen3-8B, is sharply concentrated. At a matched precision budget, spending it globally on finer quantization granularity beats locally repairing the most recoverable layers for all 8 group-128-compatible models (all but OpenLLaMA, whose width rules out group-128), by 21-52 points, including the concentrated Qwen3-8B. We report 2 secondary findings: the residual is budget-limited (8-bit is near-lossless in our evaluation across RTN, GPTQ, and AWQ), and the location of peak recovery correlates with architecture within a family, though not across families. Within this budget setting, global granularity is a better default than selectively protecting critical layers. More broadly, cheap signals that correlate with quantization damage do not necessarily identify where restoring precision improves accuracy; this must be tested with causal intervention.

Background: Deep learning models are typically trained using stochastic gradient descent or one of its variants. These methods update the weights using their gradient, estimated from a small fraction of the training data. It has been observed that when using large batch sizes there is a persistent degradation in generalization performance - known as the "generalization gap" phenomena. Identifying the origin of this gap and closing it had remained an open problem. Contributions: We examine the initial high learning rate training phase. We find that the weight distance from its initialization grows logarithmically with the number of weight updates. We therefore propose a "random walk on random landscape" statistical model which is known to exhibit similar "ultra-slow" diffusion behavior. Following this hypothesis we conducted experiments to show empirically that the "generalization gap" stems from the relatively small number of updates rather than the batch size, and can be completely eliminated by adapting the training regime used. We further investigate different techniques to train models in the large-batch regime and present a novel algorithm named "Ghost Batch Normalization" which enables significant decrease in the generalization gap without increasing the number of updates. To validate our findings we conduct several additional experiments on MNIST, CIFAR-10, CIFAR-100 and ImageNet. Finally, we reassess common practices and beliefs concerning training of deep models and suggest they may not be optimal to achieve good generalization.

Training energy-based models (EBMs) on high-dimensional data can be both challenging and time-consuming, and there exists a noticeable gap in sample quality between EBMs and other generative frameworks like GANs and diffusion models. To close this gap, inspired by the recent efforts of learning EBMs by maximizing diffusion recovery likelihood (DRL), we propose cooperative diffusion recovery likelihood (CDRL), an effective approach to tractably learn and sample from a series of EBMs defined on increasingly noisy versions of a dataset, paired with an initializer model for each EBM. At each noise level, the two models are jointly estimated within a cooperative training framework: samples from the initializer serve as starting points that are refined by a few MCMC sampling steps from the EBM. The EBM is then optimized by maximizing recovery likelihood, while the initializer model is optimized by learning from the difference between the refined samples and the initial samples. In addition, we made several practical designs for EBM training to further improve the sample quality. Combining these advances, our approach significantly boost the generation performance compared to existing EBM methods on CIFAR-10 and ImageNet datasets. We also demonstrate the effectiveness of our models for several downstream tasks, including classifier-free guided generation, compositional generation, image inpainting and out-of-distribution detection.

Audio inpainting refers to the task of reconstructing missing segments in corrupted audio recordings. While prior approaches-including waveform and spectrogram-based diffusion models-have shown promising results for short gaps, they often degrade in quality when gaps exceed 100 milliseconds (ms). In this work, we introduce a novel inpainting method based on discrete diffusion modeling, which operates over tokenized audio representations produced by a pre-trained audio tokenizer. Our approach models the generative process directly in the discrete latent space, enabling stable and semantically coherent reconstruction of missing audio. We evaluate the method on the MusicNet dataset using both objective and perceptual metrics across gap durations up to 300 ms. We further evaluated our approach on the MTG dataset, extending the gap duration to 500 ms. Experimental results demonstrate that our method achieves competitive or superior performance compared to existing baselines, particularly for longer gaps, offering a robust solution for restoring degraded musical recordings. Audio examples of our proposed method can be found at https://iftach21.github.io/

The ability to measure and track the speed and trajectory of a community's post-disaster recovery is essential to inform resource allocation and prioritization. The current survey-based approaches to examining community recovery, however, have significant lags and put the burden of data collection on affected people. Also, the existing literature lacks quantitative measures for important milestones to inform the assessment of recovery trajectory. Recognizing these gaps, this study uses location-based data related to visitation patterns and credit card transactions to specify critical recovery milestones related to population activity recovery. Using data from 2017 Hurricane Harvey in Harris County (Texas), the study specifies four critical post-disaster recovery milestones and calculates quantitative measurements of the length of time between the end of a hazard event and when the spatial areas (census tracts) reached these milestones based on fluctuations in visits to essential and non-essential facilities, and essential and non-essential credit card transactions. Accordingly, an integrated recovery metric is created for an overall measurement of each spatial area's recovery progression. Exploratory statistical analyses were conducted to examine whether variations in community recovery progression in achieving the critical milestones is correlated to its flood status, socioeconomic characteristics, and demographic composition. Finally, the extent of spatial inequality is examined. The results show the presence of moderate spatial inequality in population activity recovery in Hurricane Harvey, based upon which the inequality of recovery is measured. Results of this study can benefit post-disaster recovery resource allocation as well as improve community resilience towards future natural hazards.

Modern 3D visual learning relies on observations sampled from metric 3D assets, yet existing scans, meshes, point clouds, simulations, and reconstructions do not directly provide a sparse, comparable, and geometry-consistent panoramic training interface. Dense trajectories duplicate nearby views, source-specific rendering policies yield heterogeneous annotations, and sparse heuristics may miss important regions or introduce depth-inconsistent observations. We study how to convert 3D assets into sparse panoramic RGB-D-pose data that preserves complete scene coverage with low redundancy and auditable provenance. We propose COVER (Coverage-Oriented Viewpoint curation with ERP Range-depth warping), a training-free ERP viewpoint curator that projects geometry observed from selected views into candidate ERP probes, scores incremental coverage, and penalizes depth conflicts. Under bounded proxy error, its greedy coverage proxy preserves the standard coverage-style approximation behavior up to an additive error term. Using COVER, we build CM-EVS (Coverage-curated Metric ERP View Set), a panoramic RGB-D-pose dataset with 36,373 curated ERP frames from 1,275 indoor scenes across Blender indoor, HM3D, and ScanNet++, complemented by outdoor panoramas from TartanGround and OB3D re-encoded into the same schema. Each frame provides full-sphere RGB, metric range depth, calibrated pose; COVER-produced indoor frames include per-step provenance logs. With a median of only 25 frames per indoor scene, CM-EVS covers all 13 unified room types while maintaining compact scene-level coverage. Experiments show that COVER improves the coverage-conflict trade-off, making CM-EVS a sparse, compact, and auditable RGB-D-pose resource for geometry-consistent panoramic 3D learning.

Structured pruning is a hardware-friendly way to compress LLMs, but it is mostly validated on multiple-choice recognition tasks, while the same compressed checkpoints can collapse on the free-form generation that deployment actually requires. Two observations trace this gap. First, greedy pass@1 nearly vanishes after compression, yet pass@k recovers substantially under repeated sampling: useful generations are demoted, not erased. Second, the recoverable regime fails mainly through suffix repetition. Recovery should therefore train on the compressed model's own on-policy states with dense token-level supervision, which On-Policy Distillation (OPD) provides by reusing the pre-compression model as a frozen teacher. However, long on-policy rollouts spend early recovery budget on low-information repetitive suffixes, delaying loss descent. To mitigate this waste, we propose \shortopd, a short-to-long OPD schedule that detects teacher-confirmed repetitive suffixes, treats the surviving prefix as each rollout's effective length, and allocates future rollout budgets to the effective lengths the policy can currently use. Across math, code, and open-ended generation, \shortopd\ raises the compressed model's score to about 9times its unrecovered value and 1.6--4.4times standard recovery recipes (SFT w/o KD, KD, and SeqKD), and it matches a fixed 8192-token rollout horizon within two points using a quarter of the training time (8.5 vs.\ 35.9 hours) and 71% fewer rollout tokens. We hope this recipe helps move structured pruning beyond marginal gains on perplexity and multiple-choice benchmarks, a step closer to deployment-ready generation quality.

Sea Surface Temperature (SST) reconstructions from satellite images affected by cloud gaps have been extensively documented in the past three decades. Here we describe several Machine Learning models to fill the cloud-occluded areas starting from MODIS Aqua nighttime L3 images. To tackle this challenge, we employed a type of Convolutional Neural Network model (U-net) to reconstruct cloud-covered portions of satellite imagery while preserving the integrity of observed values in cloud-free areas. We demonstrate the outstanding precision of U-net with respect to available products done using OI interpolation algorithms. Our best-performing architecture show 50% lower root mean square errors over established gap-filling methods.

Test-time reasoning is increasingly used as a serving-time control knob, but extra reasoning is not uniformly valuable: it can repair failed attempts, waste compute on already-correct answers, or introduce harmful answer changes. We study this as a deployment allocation problem rather than a new-verifier problem. We introduce \sevra, Selective Verification for Reasoning Allocation, a serving-layer controller that decides whether to preserve a frozen solver's initial answer or invoke active verification. Using a frozen Qwen3-4B solver, we log intervention outcomes and train recoverability-aware gates from serving-visible attempt state. On \mathfive, selective verification reaches 76.3\% accuracy, compared with 75.5\% for always verifying, while reducing post-generation tokens by 26.8\% and harmful flips from 2.2\% to 1.0\%. However, an 8,192-token initial solve reaches 76.0\% accuracy with 28\% fewer total model tokens, showing that selective recovery is useful but not the best tested cost frontier. In frozen transfer to \gsm, the selective policy verifies only 3.0\% of examples, improves accuracy from 93.4\% to 94.5\%, and reduces verification tokens by 91.2\% relative to always verifying; again, a longer initial solve matches its accuracy with fewer realized tokens. On CommonsenseQA, always-on verification hurts, while Self-Consistency@5 improves accuracy at about five times the realized token cost. The resulting deployment rule is: tune the initial budget first, then use selective recovery when explicit checks, bounded retries, auditability, or regression-risk control matter.

Turning a frontier vision-language model into a robot policy usually means fine-tuning it to emit an action representation it never saw in pretraining, which throws away much of the reasoning that made the model worth reaching for. We go the other way and keep the VLM frozen. It writes the policy as a short Python control function, with no demonstrations and no fine-tuning. Writing that code once is open-loop, though. Existing closed-loop methods react at the wrong level: they retry a fixed policy or pick a different subtask, but never rewrite the code that failed. VLCP closes the loop where the failure actually lives, on the control code, within a single episode. Every K steps the VLM re-observes the scene from multi-view RGB, proprioceptive state, and a state delta, then rewrites the control function from what it just saw, so a failure is caught before it compounds. We evaluate on a 57-task MuJoCo/RoboVerse sweep. This training-free policy reaches 35.1% pooled success, against 3.5% for the identical system queried once per episode. That tenfold gap holds with non-overlapping confidence intervals in every scene family. The gain traces to a 27.3% within-episode recovery rate on failed grasps: a miss an open-loop controller would carry to the end of the episode gets re-observed and fixed at the next replan. And the loop stays cheap. A median 84% of input tokens hit cache, an episode needs only about 10 compact queries, and control blocks written during any replan persist to a cross-episode skill library reused in later prompts.

Unified image restoration (UIR) aims to recover high-quality (HQ) content from low-quality (LQ) images with different degradations using a single model. Most recent methods adapt large pretrained text-to-image (T2I) latent diffusion models for their strong capacity and generative priors. However, the variational autoencoder (VAE) in latent T2I models may discard restoration-sensitive details, while the open-ended synthesis prior can introduce content-inconsistent artifacts. We present PixRestore, a VAE-free pixel-space Diffusion Transformer (DiT) for UIR, where the diffusion backbone is trained entirely from scratch, without relying on T2I pretraining. PixRestore performs flow matching directly on patchified pixels, preserving fine-grained details while keeping the token sequence tractable. To adapt to different degradations, PixRestore learns to predict the reliability of layer features using LQ--HQ DINO feature similarity. Features from more reliable layers are fused as dense conditioning, while less reliable layers receive stronger HQ-feature supervision to encourage degradation removal. We train PixRestore on a large-scale corpus of diverse scenes and degradations, and further finetune it into a one-step generator using DINO-based adversarial objectives for efficient inference. Experiments on public benchmarks and real-world test sets show that, with only about 50M parameters and single-step inference, PixRestore achieves the best overall fidelity, perceptual quality, and robustness to degradations among competing UIR models while being far more efficient. Larger PixRestore variants can further boost performance, demonstrating the scalability of our pixel-space design. Code and the curated benchmark can be found at https://github.com/csslc/PixRestore.

We introduce GAP-URGENet, a generative-predictive fusion framework developed for Track 1 of the ICASSP 2026 URGENT Challenge. The system integrates a generative branch, which performs full-stack speech restoration in a self-supervised representation domain and reconstructs the waveform via a neural vocoder, along with a predictive branch that performs spectrogram-domain enhancement, providing complementary cues. Outputs from both branches are fused by a post-processing module, which also performs bandwidth extension to generate the enhanced waveform at 48 kHz, later downsampled to the original sampling rate. This generative-predictive fusion improves robustness and perceptual quality, achieving top performance in the blind-test phase and ranking 1st in the objective evaluation. Audio examples are available at https://xiaobin-rong.github.io/gap-urgenet_demo.

Despite the significant progress in diffusion prior-based image restoration, most existing methods apply uniform processing to the entire image, lacking the capability to perform region-customized image restoration according to user instructions. In this work, we propose a new framework, namely InstructRestore, to perform region-adjustable image restoration following human instructions. To achieve this, we first develop a data generation engine to produce training triplets, each consisting of a high-quality image, the target region description, and the corresponding region mask. With this engine and careful data screening, we construct a comprehensive dataset comprising 536,945 triplets to support the training and evaluation of this task. We then examine how to integrate the low-quality image features under the ControlNet architecture to adjust the degree of image details enhancement. Consequently, we develop a ControlNet-like model to identify the target region and allocate different integration scales to the target and surrounding regions, enabling region-customized image restoration that aligns with user instructions. Experimental results demonstrate that our proposed InstructRestore approach enables effective human-instructed image restoration, such as images with bokeh effects and user-instructed local enhancement. Our work advances the investigation of interactive image restoration and enhancement techniques. Data, code, and models will be found at https://github.com/shuaizhengliu/InstructRestore.git.

Loss Given Default (LGD) modeling faces a fundamental data quality constraint: 90% of available training data consists of proxy estimates based on pre-distress balance sheets rather than actual recovery outcomes from completed bankruptcy proceedings. We demonstrate that this mixture-contaminated training structure causes systematic failure of recursive partitioning methods, with Random Forest achieving negative r-squared (-0.664, worse than predicting the mean) on held-out test data. Information-theoretic approaches based on Shannon entropy and mutual information provide superior generalization, achieving r-squared of 0.191 and RMSE of 0.284 on 1,218 corporate bankruptcies (1980-2023). Analysis reveals that leverage-based features contain 1.510 bits of mutual information while size effects contribute only 0.086 bits, contradicting regulatory assumptions about scale-dependent recovery. These results establish practical guidance for financial institutions deploying LGD models under Basel III requirements when representative outcome data is unavailable at sufficient scale. The findings generalize to medical outcomes research, climate forecasting, and technology reliability-domains where extended observation periods create unavoidable mixture structure in training data.

Per-field accept/review with selective risk at most alpha -- accept a field only if the error rate among accepted fields is controlled -- is the trust contract document-extraction systems need, and the natural procedure silently violates it on real documents. On 13,859 genuine claude-sonnet-5 fields from 800 CORD receipts (49.0% correct) we diagnose three failure modes: document clustering (design effect 1.84-2.45), score-refit leakage (coverage 0.416 at risk 0.127, violating alpha=0.10 in 95% of splits), and a tie-mass pathology (a degenerate score collapses the threshold grid, 0.030 to 0.001). We organize the fixes as a validity ladder, guarantee form stated per tier. A fit/val split protocol restores expected-selective-risk control for a learned fusion: coverage 0.318 at risk 0.096 at nominal alpha=0.10, no tolerance band (production variant 0.326) -- an on-average point whose realized risk exceeds alpha in 47.5% of resplits, not a certificate. Mondrian Learn-then-Test with exact binomial tails yields per-group PAC certificates: field-iid 0.171 at risk 0.068, cluster-corrected 0.140, doc-iid 0.060 -- the only tier matching documents, honestly near-vacuous today. Support-bin, the pre-specified provenance taxonomy, wins every rigor tier on the sonnet CORD capture (p<1e-4, Bonferroni-corrected) -- a win that does not replicate on the same documents under haiku or qwen -- while on higher-accuracy corpora pooled thresholds win: conditioning helps exactly where pooled cannot certify, subsumed by a learned score elsewhere. A frozen-configuration confirmation on selection-untouched claude-haiku-4-5 held at both risk levels, and a blind three-annotator human-gold audit verifies the practical tier's accepted-set risk at 1.3% against its 10% budget (Fleiss' kappa=0.83; labels err one-sidedly pessimistic). Released Apache-2.0 with seed-pinned, regression-gated procedures.

While LLM agents can plan multi-step tasks, intervening at the planning stage-before any action is executed-is often the safest way to prevent harm, since certain risks can lead to severe consequences once carried out. However, existing guardrails mostly operate post-execution, which is difficult to scale and leaves little room for controllable supervision at the plan level. To address this challenge, we highlight three critical gaps in current research: data gap, model gap, and evaluation gap. To close the data gap, we introduce AuraGen, a controllable engine that (i) synthesizes benign trajectories, (ii) injects category-labeled risks with calibrated difficulty, and (iii) filters outputs via an automated reward model, producing large and reliable corpora for pre-execution safety. To close the guardian model gap, we propose a foundational guardrail Safiron, combining a cross-planner adapter with a compact guardian model. The adapter unifies different input formats, while Safiron flags risky cases, assigns risk types, and generates rationales; trained in two stages with a broadly explored data recipe, Safiron achieves robust transfer across settings. To close the evaluation gap, we release Pre-Exec Bench, a realistic benchmark covering diverse tools and branching trajectories, which measures detection, fine-grained categorization, explanation, and cross-planner generalization in human-verified scenarios. Extensive experiments demonstrate consistent gains of the proposed guardrail over strong baselines on Pre-Exec Bench, and ablations further distill actionable practices, providing a practical template for safer agentic systems.

We study KV cache eviction under a shared globally capped decode-time harness. Seven policies (LRU, H2O, SnapKV, StreamingLLM, Ada-KV, QUEST, Random) share a prompt-boundary vulnerability: without structural protection, they collapse to near-zero quality on six pure-transformer models (F1leq0.064). Reserving 10\% of cache at each boundary recovers 69--90\% of the C{=}2{,}048 reference-ceiling quality on seven LongBench models at C{=}256 (13\% retention); a ten-model panel spans 68--98\%. An attention-mass pilot (Qwen2.5-3B, N{=}30) suggests why: the position-0 sink holds {sim}75% of prefix mass, while other boundary tokens sit near {sim}0.41{times} uniform expectation, so attention scorers retain the sink but still drop structurally critical tokens. With protection, simplified score-isolation variants are TOST-equivalent to LRU at K{=}32 (Δ{=}0.02); at K{=}8, attention policies pairwise converge yet beat LRU by 0.011--0.021 F1 across C{=}256 and C{=}512. Faithful Ada-KV/QUEST add {sim}0.03--0.04 F1 on Mistral-7B and Phi-3.5 beyond simplified variants. A NIAH-32K regime-transfer pilot on Qwen3-4B (decode vs.\ prefill, C{in}{512,2048}) shows near-identical protection lifts (ratio 0.99--1.00). At 64K, protection helps but recovery is modest; faithful per-head scoring matches full-cache ceiling on Gemma-3-4B at 6.3\% retention only when the model already supports strong 64K retrieval without eviction. Overall: protection dominates; scoring differences are secondary once boundaries are guarded; per-head allocation gives a further modest gain.

The inherent generative power of denoising diffusion models makes them well-suited for image restoration tasks where the objective is to find the optimal high-quality image within the generative space that closely resembles the input image. We propose a method to adapt a pretrained diffusion model for image restoration by simply adding noise to the input image to be restored and then denoise. Our method is based on the observation that the space of a generative model needs to be constrained. We impose this constraint by finetuning the generative model with a set of anchor images that capture the characteristics of the input image. With the constrained space, we can then leverage the sampling strategy used for generation to do image restoration. We evaluate against previous methods and show superior performances on multiple real-world restoration datasets in preserving identity and image quality. We also demonstrate an important and practical application on personalized restoration, where we use a personal album as the anchor images to constrain the generative space. This approach allows us to produce results that accurately preserve high-frequency details, which previous works are unable to do. Project webpage: https://gen2res.github.io.

Despite the significant progress made by deep models in various image restoration tasks, existing image restoration networks still face challenges in terms of task generality. An intuitive manifestation is that networks which excel in certain tasks often fail to deliver satisfactory results in others. To illustrate this point, we select five representative networks and conduct a comparative study on five classic image restoration tasks. First, we provide a detailed explanation of the characteristics of different image restoration tasks and backbone networks. Following this, we present the benchmark results and analyze the reasons behind the performance disparity of different models across various tasks. Drawing from this comparative study, we propose that a general image restoration backbone network needs to meet the functional requirements of diverse tasks. Based on this principle, we design a new general image restoration backbone network, X-Restormer. Extensive experiments demonstrate that X-Restormer possesses good task generality and achieves state-of-the-art performance across a variety of tasks.

Model pruning is an effective approach for compressing large language models. However, this process often leads to significant degradation of model capabilities. While post-training techniques such as instruction tuning are commonly employed to recover model performance, existing methods often overlook the uneven deterioration of model capabilities and incur high computational costs. Moreover, some instruction data irrelevant to model capability recovery may introduce negative effects. To address these challenges, we propose the Post-training dAta Selection method for Efficient pruned large language model Recovery (PASER). PASER aims to identify instructions where model capabilities are most severely compromised within a certain recovery data budget. Our approach first applies manifold learning and spectral clustering to group recovery data in the semantic space, revealing capability-specific instruction sets. We then adaptively allocate the data budget to different clusters based on the degrees of model capability degradation. In each cluster, we prioritize data samples where model performance has declined dramatically. To mitigate potential negative transfer, we also detect and filter out conflicting or irrelevant recovery data. Extensive experiments demonstrate that PASER significantly outperforms conventional baselines, effectively recovering the general capabilities of pruned LLMs while utilizing merely 4\%-20\% of the original post-training data.

Although learning-based image restoration methods have made significant progress, they still struggle with limited generalization to real-world scenarios due to the substantial domain gap caused by training on synthetic data. Existing methods address this issue by improving data synthesis pipelines, estimating degradation kernels, employing deep internal learning, and performing domain adaptation and regularization. Previous domain adaptation methods have sought to bridge the domain gap by learning domain-invariant knowledge in either feature or pixel space. However, these techniques often struggle to extend to low-level vision tasks within a stable and compact framework. In this paper, we show that it is possible to perform domain adaptation via the noise space using diffusion models. In particular, by leveraging the unique property of how auxiliary conditional inputs influence the multi-step denoising process, we derive a meaningful diffusion loss that guides the restoration model in progressively aligning both restored synthetic and real-world outputs with a target clean distribution. We refer to this method as denoising as adaptation. To prevent shortcuts during joint training, we present crucial strategies such as channel-shuffling layer and residual-swapping contrastive learning in the diffusion model. They implicitly blur the boundaries between conditioned synthetic and real data and prevent the reliance of the model on easily distinguishable features. Experimental results on three classical image restoration tasks, namely denoising, deblurring, and deraining, demonstrate the effectiveness of the proposed method.

Since convolutional neural networks (CNNs) perform well at learning generalizable image priors from large-scale data, these models have been extensively applied to image restoration and related tasks. Recently, another class of neural architectures, Transformers, have shown significant performance gains on natural language and high-level vision tasks. While the Transformer model mitigates the shortcomings of CNNs (i.e., limited receptive field and inadaptability to input content), its computational complexity grows quadratically with the spatial resolution, therefore making it infeasible to apply to most image restoration tasks involving high-resolution images. In this work, we propose an efficient Transformer model by making several key designs in the building blocks (multi-head attention and feed-forward network) such that it can capture long-range pixel interactions, while still remaining applicable to large images. Our model, named Restoration Transformer (Restormer), achieves state-of-the-art results on several image restoration tasks, including image deraining, single-image motion deblurring, defocus deblurring (single-image and dual-pixel data), and image denoising (Gaussian grayscale/color denoising, and real image denoising). The source code and pre-trained models are available at https://github.com/swz30/Restormer.

Diffusion models have demonstrated remarkable capabilities in generating high-quality samples and enhancing performance across diverse domains through Classifier-Free Guidance (CFG). However, the quality of generated samples is highly sensitive to the selection of the guidance weight. In this work, we identify a critical ``training-inference gap'' and we argue that it is the presence of this gap that undermines the performance of conditional generation and renders outputs highly sensitive to the guidance weight. We quantify this gap by measuring the accumulated error during the inference stage and establish a correlation between the selection of guidance weight and minimizing this gap. Furthermore, to mitigate this gap, we propose DiffIER, an optimization-based method for high-quality generation. We demonstrate that the accumulated error can be effectively reduced by an iterative error minimization at each step during inference. By introducing this novel plug-and-play optimization framework, we enable the optimization of errors at every single inference step and enhance generation quality. Empirical results demonstrate that our proposed method outperforms baseline approaches in conditional generation tasks. Furthermore, the method achieves consistent success in text-to-image generation, image super-resolution, and text-to-speech generation, underscoring its versatility and potential for broad applications in future research.

Continual pre-training has increasingly become the predominant approach for adapting Large Language Models (LLMs) to new domains. This process involves updating the pre-trained LLM with a corpus from a new domain, resulting in a shift in the training distribution. To study the behavior of LLMs during this shift, we measured the model's performance throughout the continual pre-training process. we observed a temporary performance drop at the beginning, followed by a recovery phase, a phenomenon known as the "stability gap," previously noted in vision models classifying new classes. To address this issue and enhance LLM performance within a fixed compute budget, we propose three effective strategies: (1) Continually pre-training the LLM on a subset with a proper size for multiple epochs, resulting in faster performance recovery than pre-training the LLM on a large corpus in a single epoch; (2) Pre-training the LLM only on high-quality sub-corpus, which rapidly boosts domain performance; and (3) Using a data mixture similar to the pre-training data to reduce distribution gap. We conduct various experiments on Llama-family models to validate the effectiveness of our strategies in both medical continual pre-training and instruction tuning. For example, our strategies improve the average medical task performance of the OpenLlama-3B model from 36.2% to 40.7% with only 40% of the original training budget and enhance the average general task performance without causing forgetting. Furthermore, we apply our strategies to the Llama-3-8B model. The resulting model, Llama-3-Physician, achieves the best medical performance among current open-source models, and performs comparably to or even better than GPT-4 on several medical benchmarks. We release our models at https://huggingface.co/YiDuo1999/Llama-3-Physician-8B-Instruct.

Not a day goes by without hearing about the impressive feats of large language models (LLMs), and equally, not a day passes without hearing about their challenges. LLMs are notoriously vulnerable to biases in their dataset, leading to issues such as toxicity. While domain-adaptive training has been employed to mitigate these issues, these techniques often address all model parameters indiscriminately during the repair process, resulting in poor repair quality and reduced model versatility. In this paper, we introduce a novel dynamic slicing-based intent-aware LLM repair strategy, IRepair. This approach selectively targets the most error-prone sections of the model for repair. Specifically, we propose dynamically slicing the model's most sensitive layers that require immediate attention, concentrating repair efforts on those areas. This method enables more effective repairs with potentially less impact on the model's overall performance by altering a smaller portion of the model. We evaluated our technique on three models from the GPT2 and GPT-Neo families, with parameters ranging from 800M to 1.6B, in a toxicity mitigation setup. Our results show that IRepair repairs errors 43.6% more effectively while causing 46% less disruption to general performance compared to the closest baseline, direct preference optimization. Our empirical analysis also reveals that errors are more concentrated in a smaller section of the model, with the top 20% of layers exhibiting 773% more error density than the remaining 80\%. This highlights the need for selective repair. Additionally, we demonstrate that a dynamic selection approach is essential for addressing errors dispersed throughout the model, ensuring a robust and efficient repair.

In recent years, the field of image inpainting has developed rapidly, learning based approaches show impressive results in the task of filling missing parts in an image. But most deep methods are strongly tied to the resolution of the images on which they were trained. A slight resolution increase leads to serious artifacts and unsatisfactory filling quality. These methods are therefore unsuitable for interactive image processing. In this article, we propose a method that solves the problem of inpainting arbitrary-size images. We also describe a way to better restore texture fragments in the filled area. For this, we propose to use information from neighboring pixels by shifting the original image in four directions. Moreover, this approach can work with existing inpainting models, making them almost resolution independent without the need for retraining. We also created a GIMP plugin that implements our technique. The plugin, code, and model weights are available at https://github.com/a-mos/High_Resolution_Image_Inpainting.

Retrieval-augmented generation (RAG) grounds answers in retrieved passages, yet relevance does not guarantee sufficiency: a topical passage may still fail to justify the answer. We study evidence sufficiency verification for selective RAG answering, in which a verifier receives a question, a candidate answer, and retrieved evidence and decides whether the evidence supports, refutes, or is insufficient for the answer, answering only when support is established. We present SURE-RAG, an aggregation protocol that treats evidence sufficiency as a set-level property: missing hops and unresolved conflicts cannot be detected by scoring passages independently. A shared claim-evidence verifier produces a local relation distribution for each (claim, passage) pair, which SURE-RAG aggregates into four interpretable answer-level feature blocks (coverage, relation strength, uncertainty, and retrieval), producing a three-way decision and an auditable selective score. We evaluate on HotpotQA-RAG v3, a controlled multi-hop benchmark, under an artifact-aware protocol (shortcut baselines, counterfactual swaps, no-oracle checks, and GPT-4o audits). Calibrated SURE-RAG attains 0.9075 Macro-F1 (raw 0.8951 +/- 0.0069), well above DeBERTa mean-pooling (0.6516) and a GPT-4o judge (0.7284), and on par with a strong concat cross-encoder (0.8888 +/- 0.0109) while remaining fully auditable. At 30% coverage, risk falls from 0.2588 to 0.1642, a 37% relative reduction. As a boundary-mapping experiment, we contrast SURE-RAG with GPT-4o on HaluBench unsafe detection: the ranking reverses (0.3343 vs. 0.7389 unsafe-F1), indicating that controlled sufficiency verification and natural hallucination detection are distinct problems.

AI research agents combine prior knowledge, public sources, and experimental feedback to produce useful results. The Discovery Certification Protocol (DCP) turns claims about these results into executable recovery and feedback tests. Gate 1 validates useful improvement on sealed evaluation. Gate 2 gives matched agents the registered starting information and observed Web content while withholding the target research history. Every valid method reaching the numerical target supplies a recovery witness and triggers the Core veto. DCP Core requires adequate controls, zero observed recoveries, and a finite-sample bound on recovery in one fresh registered episode. Optional Gate 3 measures the average effect of truthful feedback relative to a specified neutral policy from a shared checkpoint. DCP Evidence adds this effect after independent null calibration and a registered effect margin. Two controlled audits exercise the complete protocol in SQLite optimization and virtual catalyst control under different models. Each produced zero recoveries in 96 episodes, with an upper bound of 0.0468. Each paired study yielded 30 truthful recoveries and zero neutral recoveries, with passing 60-pair null studies. Additional cases exercise Core, recovered, and audit-incomplete decisions. A deterministic, LLM-free verifier reproduces the decisions from frozen evidence. DCP provides a common evidence language for useful outcomes, alternative routes, and feedback effects across AI research.

We propose NeRFiller, an approach that completes missing portions of a 3D capture via generative 3D inpainting using off-the-shelf 2D visual generative models. Often parts of a captured 3D scene or object are missing due to mesh reconstruction failures or a lack of observations (e.g., contact regions, such as the bottom of objects, or hard-to-reach areas). We approach this challenging 3D inpainting problem by leveraging a 2D inpainting diffusion model. We identify a surprising behavior of these models, where they generate more 3D consistent inpaints when images form a 2times2 grid, and show how to generalize this behavior to more than four images. We then present an iterative framework to distill these inpainted regions into a single consistent 3D scene. In contrast to related works, we focus on completing scenes rather than deleting foreground objects, and our approach does not require tight 2D object masks or text. We compare our approach to relevant baselines adapted to our setting on a variety of scenes, where NeRFiller creates the most 3D consistent and plausible scene completions. Our project page is at https://ethanweber.me/nerfiller.

Deep image restoration models aim to learn a mapping from degraded image space to natural image space. However, they face several critical challenges: removing degradation, generating realistic details, and ensuring pixel-level consistency. Over time, three major classes of methods have emerged, including MSE-based, GAN-based, and diffusion-based methods. However, they fail to achieve a good balance between restoration quality, fidelity, and speed. We propose a novel method, HYPIR, to address these challenges. Our solution pipeline is straightforward: it involves initializing the image restoration model with a pre-trained diffusion model and then fine-tuning it with adversarial training. This approach does not rely on diffusion loss, iterative sampling, or additional adapters. We theoretically demonstrate that initializing adversarial training from a pre-trained diffusion model positions the initial restoration model very close to the natural image distribution. Consequently, this initialization improves numerical stability, avoids mode collapse, and substantially accelerates the convergence of adversarial training. Moreover, HYPIR inherits the capabilities of diffusion models with rich user control, enabling text-guided restoration and adjustable texture richness. Requiring only a single forward pass, it achieves faster convergence and inference speed than diffusion-based methods. Extensive experiments show that HYPIR outperforms previous state-of-the-art methods, achieving efficient and high-quality image restoration.

When researchers ask whether two transformer layers are "equivalent" for compression, they often conflate distinct tests. Replacement asks whether one layer's map can substitute for another's in place; interchange asks whether two layers approximately commute when their positions are swapped. Both are output-grounded swap-KL probes, but they need not agree: on pretrained transformers the protocol gap can change which layers look safe to prune by several-fold under the same evaluator, especially when replacement distances are high. We measure both protocols across checkpoints and architectures. On a Pythia training trajectory (410M and 1.4B), the replacement-interchange gap grows from initialization to convergence. Under one matched WikiText-2 contract at 8B scale, Qwen3-8B enters a divergent regime: interchange-guided removal is several-fold safer than replacement-guided at the same layer budgets, while Llama-3.1-8B ties the two protocols for pruning cost even though interchange KL is lower, showing metric gaps need not map one-to-one to removal. Before layer removal or merging, score both swap-KLs on the target checkpoint; the diagnostic requires only unlabeled forward passes.

3D Gaussian Splatting (3DGS) has demonstrated outstanding performance in novel view synthesis, achieving a balance between rendering quality and real-time performance. 3DGS employs Adaptive Density Control (ADC) to increase the number of Gaussians. However, the clone and split operations within ADC are not sufficiently efficient, impacting optimization speed and detail recovery. Additionally, overfitted Gaussians that affect rendering quality may exist, and the original ADC is unable to remove them. To address these issues, we propose two key innovations: (1) Long-Axis Split, which precisely controls the position, shape, and opacity of child Gaussians to minimize the difference before and after splitting. (2) Recovery-Aware Pruning, which leverages differences in recovery speed after resetting opacity to prune overfitted Gaussians, thereby improving generalization performance. Experimental results show that our method significantly enhances rendering quality. Due to resubmission reasons, this version has been abandoned. The improved version is available at https://xiaobin2001.github.io/improved-gs-web .

Recent advances in 3D reconstruction have achieved remarkable progress in high-quality scene capture from dense multi-view imagery, yet struggle when input views are limited. Various approaches, including regularization techniques, semantic priors, and geometric constraints, have been implemented to address this challenge. Latest diffusion-based methods have demonstrated substantial improvements by generating novel views from new camera poses to augment training data, surpassing earlier regularization and prior-based techniques. Despite this progress, we identify three critical limitations in these state-of-the-art approaches: inadequate coverage beyond known view peripheries, geometric inconsistencies across generated views, and computationally expensive pipelines. We introduce GaMO (Geometry-aware Multi-view Outpainter), a framework that reformulates sparse-view reconstruction through multi-view outpainting. Instead of generating new viewpoints, GaMO expands the field of view from existing camera poses, which inherently preserves geometric consistency while providing broader scene coverage. Our approach employs multi-view conditioning and geometry-aware denoising strategies in a zero-shot manner without training. Extensive experiments on Replica and ScanNet++ demonstrate state-of-the-art reconstruction quality across 3, 6, and 9 input views, outperforming prior methods in PSNR and LPIPS, while achieving a 25times speedup over SOTA diffusion-based methods with processing time under 10 minutes. Project page: https://yichuanh.github.io/GaMO/

Conformal prediction (CP) provides distribution-free prediction intervals for fixed forecasters, but its standard calibration procedure is often inefficient for time series data, where forecast errors are temporally dependent and change across time and operating conditions. Recent time series CP methods improve local calibration using recent, weighted, or localized residuals. Yet local calibration can remain indirect, since broad residual weighting or additional adaptation procedures may dilute the evidence most relevant to the current prediction. This motivates a simple retrieval and correction strategy that selects similar past residuals as local evidence and then corrects the coverage error left by retrieval. In this paper, we propose Retrieval--Corrected Conformal Prediction (RCCP), a retrieval-augmented calibration method for time series prediction intervals. RCCP builds an asymmetric interval from retrieved one-sided residuals and calibrates its normalized retrieval error with a scalar conformal correction. Thus, retrieval provides local residual evidence, while conformal correction determines the final scale needed for coverage. We provide a coverage-gap bound based on the stability of the normalized retrieval error distribution. Across standard benchmarks and backbone forecasters, RCCP attains the target coverage in every setting and achieves the lowest Winkler scores, with fewer severe misses. RCCP also achieves low calibration and inference overhead, showing that retrieval-corrected calibration is an effective and scalable approach to uncertainty quantification in time series forecasting. Code is available at https://github.com/jinsaaang/rccp.

In many real-world applications, deep neural networks are retrained from scratch as a dataset grows in size. Given the computational expense for retraining networks, it has been argued that continual learning could make updating networks more efficient. An obstacle to achieving this goal is the stability gap, which refers to an observation that when updating on new data, performance on previously learned data degrades before recovering. Addressing this problem would enable learning new data with fewer network updates, resulting in increased computational efficiency. We study how to mitigate the stability gap. We test a variety of hypotheses to understand why the stability gap occurs. This leads us to discover a method that vastly reduces this gap. In large-scale class incremental learning experiments, we are able to significantly reduce the number of network updates needed for continual learning. Our work has the potential to advance the state-of-the-art in continual learning for real-world applications along with reducing the carbon footprint required to maintain updated neural networks.

LLM agents are increasingly explored for automating root cause analysis (RCA) in cloud-native systems, creating a need to evaluate both diagnostic correctness and the quality of the supporting investigation. Existing static benchmarks offer repeatable inputs but limited system-facing interaction, while live testbeds expose realistic tools but hinder controlled comparison because incident evidence varies across runs; both paradigms focus primarily on final answers. To address these limitations, we present Cloud-OpsBench, an evaluation infrastructure for interactive and evidence-grounded cloud RCA. It comprises 754 runtime-verified cases across 57 fault types on two microservice workloads spanning application services and Kubernetes platform layers. Each fault is captured as a state snapshot and replayed through standard diagnostic interfaces, with outcome labels and diagnostic evidence graphs that enable matched comparisons and process-level analysis. Across ten LLM agents, the strongest Joint RCA Accuracy (JRA) reaches 0.76 on OnlineBoutique and 0.68 on TrainTicket, while the corresponding Evidence Closure Rates (ECR) are only 0.38 and 0.15. This outcome--process gap shows that final-answer correctness alone substantially overestimates agents' ability to perform evidence-grounded diagnosis.

Vision-language models (VLMs) fail many detail-centric questions for a concrete reason: the answer is visible in the image, yet lost after the image is compressed into a low-resolution global view. Allocating more visual tokens to every query improves some OCR and document cases, but it spends computation indiscriminately and can disturb tasks that rely on global context. We propose GapSight, a framework for learning visual re-reading: a VLM first takes a global glance, then selectively returns to a free-form region when the question calls for local evidence. The supervision comes from the target model's own failure signal. Offline, we compare answer loss or multiple-choice option margin under a global-only view and candidate crop-augmented views; crops that improve the target answer become model-specific review labels. A lightweight free-form crop router distills these labels into a one-shot inference policy that predicts whether to review, expected utility, and a continuous crop box from the global state. Across LLaVA-1.5-7B, InternVL2.5-8B, and Qwen2-VL-2B-Instruct, GapSight improves the Base no-zoom baseline on six benchmarks spanning OCR, documents, charts, infographics, VStarBench, and MME-RealWorld-Lite. On InternVL2.5-8B, GapSight raises the six-benchmark average from 52.25 to 64.29, above CropVLM (57.16), ViCrop (55.84), and ZoomRefine (54.43). Mechanism analyses show that the router rescues concrete wrong answers, adapts its action rate by task, and forms a favorable token-performance profile. These results position loss-gap supervision as a practical route to teaching VLMs when and where to look again.

Despite diffusion models' superior capabilities in modeling complex distributions, there are still non-trivial distributional discrepancies between generated and ground-truth images, which has resulted in several notable problems in image generation, including missing object errors in text-to-image generation and low image quality. Existing methods that attempt to address these problems mostly do not tend to address the fundamental cause behind these problems, which is the distributional discrepancies, and hence achieve sub-optimal results. In this paper, we propose a particle filtering framework that can effectively address both problems by explicitly reducing the distributional discrepancies. Specifically, our method relies on a set of external guidance, including a small set of real images and a pre-trained object detector, to gauge the distribution gap, and then design the resampling weight accordingly to correct the gap. Experiments show that our methods can effectively correct missing object errors and improve image quality in various image generation tasks. Notably, our method outperforms the existing strongest baseline by 5% in object occurrence and 1.0 in FID on MS-COCO. Our code is publicly available at https://github.com/UCSB-NLP-Chang/diffusion_resampling.git.

As AI agents move from chat interfaces to systems that read private data, call tools, and execute multi-step workflows, guardrails become a last line of defense against concrete deployment harms. In these settings, guardrail failures are no longer merely answer-quality errors: they can leak secrets, authorize unsafe actions, or block legitimate work. The hardest failures are often contextual: whether an action is acceptable depends on local privacy norms, organizational policies, and user expectations that resist pre-deployment specification. This creates a practical gap: guardrails must adapt to their own operating environments, yet deployment feedback is typically limited to sparse, noisy user-reported failures, and repeated fine-tuning is often impractical. To address this gap, we propose LiSA (Lifelong Safety Adaptation), a conservative policy induction framework that improves a fixed base guardrail through structured memory. LiSA converts occasional failures into reusable policy abstractions so that sparse reports can generalize beyond individual cases, adds conflict-aware local rules to prevent overgeneralization in mixed-label contexts, and applies evidence-aware confidence gating via a posterior lower bound, so that memory reuse scales with accumulated evidence rather than empirical accuracy alone. Across PrivacyLens+, ConFaide+, and AgentHarm, LiSA consistently outperforms strong memory-based baselines under sparse feedback, remains robust under noisy user feedback even at 20% label-flip rates, and pushes the latency--performance frontier beyond backbone model scaling. Ultimately, LiSA offers a practical path to secure AI agents against the unpredictable long tail of real-world edge risks.

Code editing requires a model to decide where to make changes, generate the new content, and preserve everything else. We study how masked diffusion language models divide these responsibilities across four editing interfaces: whole-file rewriting, search-and-replace, locate-then-infill, and token-level editing. Experiments on CanItEdit reveal a composition gap: diffusion models can generate coordinated changes when the correct edit locations are supplied, but much of this capability is lost when those locations must be predicted. Access to the intact original code helps the model fill multiple edit regions, yet does not resolve the difficulty of selecting those regions. By varying the editable regions while holding the generation model and decoding procedure fixed, we identify two distinct requirements for successful editing: covering every required change and placing precise boundaries around it. Missing a required region prevents the corresponding change, while widening regions to ensure coverage can sharply reduce success by requiring unchanged code to be regenerated. A sentence-level Wiki editing probe shows the same qualitative gap between supplied and predicted locations beyond code. These findings show why strong infilling capability alone does not ensure reliable editing: the interface must expose all required changes while limiting regeneration of unchanged code.

Evaluating conditional coverage remains one of the most persistent challenges in assessing the reliability of predictive systems. Although conformal methods can give guarantees on marginal coverage, no method can guarantee to produce sets with correct conditional coverage, leaving practitioners without a clear way to interpret local deviations. To overcome sample-inefficiency and overfitting issues of existing metrics, we cast conditional coverage estimation as a classification problem. Conditional coverage is violated if and only if some classifier can achieve lower risk than the target coverage. Through the choice of a (proper) loss function, the resulting risk difference gives a conservative estimate of natural miscoverage measures such as L1 and L2 distance, and can even separate the effects of over- and under-coverage, and non-constant target coverages. We call the resulting family of metrics excess risk of the target coverage (ERT). We show experimentally that the use of modern classifiers provides much higher statistical power than simple classifiers underlying established metrics like CovGap. Additionally, we use our metric to benchmark different conformal prediction methods. Finally, we release an open-source package for ERT as well as previous conditional coverage metrics. Together, these contributions provide a new lens for understanding, diagnosing, and improving the conditional reliability of predictive systems.

Onboard satellites must restore a channel-degraded image on a few watts, using neuromorphic accelerators (e.g., BrainChip Akida, Intel Loihi-2) that support no softmax or attention. We ask which encoder restores best under that constraint and introduce LIMODENet (LinearMix-ODENet), a 0.69M softmax-/QKV-free backbone whose residual stages read as ODE discretizations and which is empirically information-preserving (probe accuracy rises 79.9% -> 98.4% from stem to head). At iso-parameters it restores 1 dB DVB-S2X-degraded EuroSAT better than a CNN autoencoder (+1.75 dB PSNR) and a skip-connection U-Net (+1.07 dB), three seeds, non-overlapping. Unconstrained modern restorers (NAFNet, Restormer) win on fidelity; we decompose that gap: spiking-legal additive skips recover about half, and the rest traces to attention and channel gating. LIMODENet then converts end-to-end to a spiking network with zero blocked operations, versus 22-24 for the competitors: not the best restorer available, but the best verified deployable within a real power budget.

Image restoration networks are usually comprised of an encoder and a decoder, responsible for aggregating image content from noisy, distorted data and to restore clean, undistorted images, respectively. Data aggregation as well as high-resolution image generation both usually come at the risk of involving aliases, i.e.~standard architectures put their ability to reconstruct the model input in jeopardy to reach high PSNR values on validation data. The price to be paid is low model robustness. In this work, we show that simply providing alias-free paths in state-of-the-art reconstruction transformers supports improved model robustness at low costs on the restoration performance. We do so by proposing BOA-Restormer, a transformer-based image restoration model that executes downsampling and upsampling operations partly in the frequency domain to ensure alias-free paths along the entire model while potentially preserving all relevant high-frequency information.

In this work, we empirically show that updating pretrained LMs (350M, 1.3B, 2.7B) with just a few steps of Gradient Ascent Post-training (GAP) on random, unlabeled text corpora enhances its zero-shot generalization capabilities across diverse NLP tasks. Specifically, we show that GAP can allow LMs to become comparable to 2-3x times larger LMs across 12 different NLP tasks. We also show that applying GAP on out-of-distribution corpora leads to the most reliable performance improvements. Our findings indicate that GAP can be a promising method for improving the generalization capability of LMs without any task-specific fine-tuning.

Reinforcement learning with verifiable rewards (RLVR) substantially improves single-sample accuracy (pass@1) but causes the policy's solution space to contract, diminishing the returns of test-time scaling. In this work, we investigate where inside a reasoning trajectory this breadth is lost: does the policy fail to access a valid solution family, or does it fail to execute computation once initiated? To disentangle access from execution, we analyze the Countdown task, whose solution space can be exhaustively enumerated into discrete entrance families defined by the first operand and operator, across PPO on Qwen2.5-3B and GRPO on Qwen2.5-3B-Instruct. Across both training setups, solution coverage falls by up to 67%, halving even on problems solved across all checkpoints. We show that this contraction is heavily concentrated at the entrance: per-token likelihood shifts are 11x--16x larger prior to the first arithmetic operation than during downstream reasoning. Supplying only an unselected entrance prefix restores completion rates in low-access families by over an order of magnitude (0.018 -> 0.212 under PPO), demonstrating that alternative solutions remain executable but are no longer initiated. Guided by this localization, we find that while surface prompting fails to recover diversity, entrance-targeted interventions succeed: late-layer parameter interpolation with early checkpoints increases solution coverage by 37% at no loss in pass@1. Finally, we show that early-step entropy collapse recurs across six math benchmarks with 7B and 14B models, but is not an inevitable byproduct of reasoning optimization: an SFT baseline preserves more than double the coverage, and staged SFT--DPO--RLVR pipelines retain early-step entropy. In summary, reasoning breadth is lost at the door, not inside the room. Code: https://github.com/ershiyidian/early-branch-locking.

Machine unlearning aims to make a model forget specific data, yet unlearned LLMs often fail to stay unlearned: brief fine-tuning can revive removed knowledge. Existing robustness predictors rely on global weight-space displacement, but distance alone can be misleading when random or destructive updates collapse performance. We argue that relearning robustness depends on update structure: robust unlearning should affect forget-critical weights while sparing retain-critical ones. We introduce the Forget-Retain Alignment Gap (FRAG), a training-free predictor that scores an update's forget-retain alignment without running a relearning attack, and separates selective from dense updates more reliably than global distance. Building on the forget-critical, retain-sparing principle, Forget-Retain Pruning (FRP) improves relearning robustness. Our results suggest that weight selectivity better explains robustness than distance alone. Code is available at https://github.com/Yi1-Chen/FRAG.

Tool-using LLM agents increasingly use the Model Context Protocol (MCP) to answer from heterogeneous evidence sources, including search, APIs, databases, clinical records, and formulary tools. Standard factuality metrics usually test whether an answer is supported by pooled evidence, missing a provenance-sensitive failure mode: a claim may be supported somewhere while being attributed to the wrong source. We call this cross-source conflation. We introduce ProvenanceGuard, a source-aware verifier for MCP-grounded answers. It consumes captured MCP traces with stable tool IDs, source IDs, and raw outputs; decomposes answers into atomic claims; routes claims to source-specific evidence; checks support with NLI and a token-alignment proxy; compares stated attribution with the routed source; and returns per-claim verdicts plus an answer-level allow/block decision. Blocked answers can be repaired with retrieval-augmented answer revision and re-verified. We evaluate on 281 medical-domain MCP-agent traces. A 266-trace adjudicated subset yields 2,325 LLM-assisted claim labels split by trace; 361 held-out labels are human-verified. On the 40-trace held-out split, ProvenanceGuard achieves block F1 0.802 and source accuracy 0.858 over 260 source-eligible claims, outperforming source-blind baselines that do not emit claim-to-source IDs. On a harder multi-source benchmark it reaches block F1 0.846, while source-plus-relation accuracy drops to 0.229, showing that exact source ownership remains difficult with semantically close sources. Repair-and-reverify resolves all blocked answers in the full trace set, often via conservative fallback. In 50 controlled clinical conflation probes, ProvenanceGuard detects all injected attribution swaps with no retained wrong attribution. These results show that source attribution is an independent axis for factuality verification in MCP-based agents.

Post-route power recovery changes cell choices under tightly coupled timing, electrical and physical constraints, and the value of each change depends on what it costs to repair its side effects. We propose an AI-driven framework in which a learned model drives both phases of the optimization: it ranks the powerrecovery edits to try and the repair actions that follow, while deterministic electronic design automation (EDA) analyses govern every acceptance. The framework records baseline constraint margins, identifies the damage a recovery transaction introduces in each analysis view, holds pre-existing violations at their baseline rather than working them inside the power step, and caps repair spending at a fraction of the measured saving. An ensemble of gradient-boosted models predicts power change, normalized damage reduction and constraint-regression risk from action and timing-context features available before each trial; calibrated, conservative estimates feed separate acquisition scores for recovery and repair, with a deterministic fallback when the model is uncertain. Recovery and repair remain speculative until physical implementation and fresh analysis establish baseline preservation and positive net saving. We specify the contract, the learned policy, the transactional flow and a pre-registered public evaluation protocol on open designs. Evidence from a companion study on public designs supports the contract; the learned policy is proposed, and no trained-model results or proprietary design measurements are reported.

A semantic decision engine such as Jev can return a valid answer and still miss a network deadline, select an infeasible action or leave the service unverified. We systematize 139 paper families by decision interface, execution path and check ownership. Fifty families claim that their engine fits a control loop or time budget, but only four support the claim with matched measurement. Across all 139, four report deadline attainment. The gap concentrates where the decision has no deterministic computation step. Those 72 families make 22 of the claims, none supported, and name a coverage owner in only two. Bounded tests under one event model show that each gap can reverse an admission verdict. A decision that meets a 10 s budget for every isolated request meets it for none once decisions queue ahead of replayed execution times. The same engine passes one coverage check and fails another. We derive a minimum reporting record, design rules and a research agenda for admitting decision engines to control loops.

Timely intensive care dictates survival, yet emergency infrastructure remains unevenly distributed across Sri Lanka. While pre-hospital services have expanded, the transition to definitive care remains a critical bottleneck. This study evaluates national emergency resilience by quantifying the gap between clinical demand and the availability of specialized resources across all 25 districts. Using the latest national epidemiological data and terrain-aware H3 hexagonal modeling, we analyzed accessibility for seven critical conditions based on spatial gaps, clinical need-gaps, lethality, coverage, and resource availability. Based on these metrics, unsupervised K-Means clustering was applied to categorize districts into four policy-actionable archetypes: Critical Structural Exclusion, Institutional Mirages, Operational Capacity Strain, and High-Resilience Benchmarks. Our study suggests that severe service deficits exist in the Northern and Eastern provinces, where spatial gaps exceed 70%, rendering the Golden Hour operationally impossible. Notably, specialist scarcity drives systemic pressure more than bed capacity; underserved regions effectively function as institutional mirages. This study suggests that improving accessibility by 25% in high-priority clusters would reduce the national need-gap by 9.65%, providing a roadmap for the strategic redistribution of specialists to ensure healthcare equity.

Blind face restoration aims at recovering high-quality face images from those with unknown degradations. Current algorithms mainly introduce priors to complement high-quality details and achieve impressive progress. However, most of these algorithms ignore abundant contextual information in the face and its interplay with the priors, leading to sub-optimal performance. Moreover, they pay less attention to the gap between the synthetic and real-world scenarios, limiting the robustness and generalization to real-world applications. In this work, we propose RestoreFormer++, which on the one hand introduces fully-spatial attention mechanisms to model the contextual information and the interplay with the priors, and on the other hand, explores an extending degrading model to help generate more realistic degraded face images to alleviate the synthetic-to-real-world gap. Compared with current algorithms, RestoreFormer++ has several crucial benefits. First, instead of using a multi-head self-attention mechanism like the traditional visual transformer, we introduce multi-head cross-attention over multi-scale features to fully explore spatial interactions between corrupted information and high-quality priors. In this way, it can facilitate RestoreFormer++ to restore face images with higher realness and fidelity. Second, in contrast to the recognition-oriented dictionary, we learn a reconstruction-oriented dictionary as priors, which contains more diverse high-quality facial details and better accords with the restoration target. Third, we introduce an extending degrading model that contains more realistic degraded scenarios for training data synthesizing, and thus helps to enhance the robustness and generalization of our RestoreFormer++ model. Extensive experiments show that RestoreFormer++ outperforms state-of-the-art algorithms on both synthetic and real-world datasets.

In offline reinforcement learning, the challenge of out-of-distribution (OOD) is pronounced. To address this, existing methods often constrain the learned policy through policy regularization. However, these methods often suffer from the issue of unnecessary conservativeness, hampering policy improvement. This occurs due to the indiscriminate use of all actions from the behavior policy that generates the offline dataset as constraints. The problem becomes particularly noticeable when the quality of the dataset is suboptimal. Thus, we propose Adaptive Advantage-guided Policy Regularization (A2PR), obtaining high-advantage actions from an augmented behavior policy combined with VAE to guide the learned policy. A2PR can select high-advantage actions that differ from those present in the dataset, while still effectively maintaining conservatism from OOD actions. This is achieved by harnessing the VAE capacity to generate samples matching the distribution of the data points. We theoretically prove that the improvement of the behavior policy is guaranteed. Besides, it effectively mitigates value overestimation with a bounded performance gap. Empirically, we conduct a series of experiments on the D4RL benchmark, where A2PR demonstrates state-of-the-art performance. Furthermore, experimental results on additional suboptimal mixed datasets reveal that A2PR exhibits superior performance. Code is available at https://github.com/ltlhuuu/A2PR.

Polymarket has emerged as a prominent prediction market platform and one of the fastest-growing applications in DeFi. To achieve low-latency trading, it adopts a hybrid architecture that matches orders off-chain but settles them on-chain for final execution. This design creates a consistency gap we call Ghost Fills: an order that is successfully matched off-chain may later fail during on-chain settlement. To understand the security implications of this gap, we investigate such failed settlements by building GHOSTHUNTER, which reconstructs them from on-chain traces and attributes to concrete attack patterns. Across 1,952,440 reverted match-order transactions, we find that attackers exploit the time gap between matching and settlement to invalidate already matched orders before they are finalized on-chain. We then identify four attack vectors from these incidents: nonce bump, balance drain, allowance revoke, and proxy trap, realized via 35 evolving variants. These vectors allow attackers to selectively revert 980,133 filled orders, enabling risk-free prediction, arbitrage-bot hunting, and liquidity reward manipulation, realizing at least \1.49M in profit, which places 1.78 B USD at risk and 2.17 M POL (about \212 K) paid by operator. During peak hours, more than 24.3% of all filled orders reverted, causing de facto DoS attacks. We also find that code derived from the flawed contract still appears in 167 independent contracts across 10 chains holding at least 23 M in user funds, extending the impact beyond Polymarket. We have disclosed our evidence to affected parties, and the issue has been partially mitigated.

Operations Research practitioners debug infeasible models through an iterative process: inspecting Irreducible Infeasible Subsystems ( IIS), identifying constraint conflicts, and repairing formulations until feasibility is restored. Existing LLM benchmarks mostly treat OR as one-shot translation from problem descriptions to solver code, omitting this diagnostic loop. We formalize infeasible-model repair as a solver-in-the-loop Markov Decision Process in which each action triggers solver re-execution and IIS recomputation, yielding deterministic, verifiable feedback. We introduce ORLoopBench, a benchmark suite with two components: OR-Debug-Bench releases 5,362 LP/MILP repair instances, while OR-Bias-Bench evaluates closed-form operational decision rationality across inventory settings. Solver-verified RLVR training enables an 8B model to surpass frontier APIs on LP repair (95.3% vs 92.4% RR @5), improves diagnostic behavior, and transfers to MILP repair. The same evaluation exposes semantic drift in whole-model code regeneration: feasible regenerated MILPs can solve the wrong problem. Process-level evaluation with solver oracles enables targeted training for reliable OR self-correction.

Image reconstruction and synthesis have witnessed remarkable progress thanks to the development of generative models. Nonetheless, gaps could still exist between the real and generated images, especially in the frequency domain. In this study, we show that narrowing gaps in the frequency domain can ameliorate image reconstruction and synthesis quality further. We propose a novel focal frequency loss, which allows a model to adaptively focus on frequency components that are hard to synthesize by down-weighting the easy ones. This objective function is complementary to existing spatial losses, offering great impedance against the loss of important frequency information due to the inherent bias of neural networks. We demonstrate the versatility and effectiveness of focal frequency loss to improve popular models, such as VAE, pix2pix, and SPADE, in both perceptual quality and quantitative performance. We further show its potential on StyleGAN2.

Test data from public benchmarks inevitably leaks into pretraining corpora, inflating evaluation scores once memorized. Contamination mitigation evaluation intervenes in the decoding process to suppress memorization and restore a contaminated model's genuine capability, but its prevailing metric, the G-AP (Gap of Aggregate Performance), is flawed. Discrete correct/incorrect readouts cannot characterize per-question performance, averaging before differencing lets over- and under-suppression cancel out, and uniform per-question weighting invites strategies to push solve probabilities onto the clean model's high-frequency values. We propose SA-PPG (Stratified Aggregate of Per-question Probability Gaps): estimate each question's solve probability by sampling, difference it against the clean model per question, and aggregate within groups defined by the clean model's solve probability. Existing mitigation strategies first estimate where contamination lies and then operate on the estimate, so they are only as correct as the estimate. RailCap instead judges contamination during generation: whenever a sample falls back onto the greedy trajectory, the next trajectory token is capped to the runner-up, accumulating suppression until the response distribution becomes sufficiently dispersed. Across multiple contaminated models and benchmarks, SA-PPG reveals that prior strategies' restoration is substantially overestimated, while RailCap attains the lowest SA-PPG.

APR (Automated Program Repair) aims to automatically locate program defects, generate patches and validate the repairs. Existing techniques for APR are often combined with LLMs (Large Language Models), which leverages the code-related knowledge of LLMs to improve repair effectiveness. Current LLM-based APR methods typically utilize test cases only during the inference stage, adopting an iterative approach that performs repair first and validates it through test execution afterward. This conventional paradigm neglects two important aspects: the potential contribution of test cases in the training phase, and the possibility of leveraging testing prior to repair. To address this, we propose Repair-R1, which introduces test cases into the model's training phase and shifts test generation to precede repair. The model is required to first generate discriminative test cases that can distinguish defective behaviors, and then perform repair based on these tests. This enables the model to better locate defects and understand the underlying causes of defects, thereby improving repair effectiveness. We implement Repair-R1 with three different backbone models, using RL (reinforcement learning) to co-optimize test generation and bug repair. Experimental results on four widely adopted benchmarks demonstrate the superiority of Repair-R1. Specially, compared to vanilla models, Repair-R1 improves repair success rate by 2.68\% to 48.29\%, test generation success rate by 16.38\% to 53.28\%, and test coverage by 0.78\% to 53.96\%. We publish the code and weights at https://github.com/Tomsawyerhu/APR-RL and https://huggingface.co/tomhu/Qwen3-4B-RL-5000-step.

Mixed-precision quantization must decide which parts of a model to keep at higher precision. A common premise, shared by sensitivity-based methods such as HAWQ and CoopQ, is that the loss from quantizing a set of layers can be reconstructed from per-layer or pairwise sensitivities measured in isolation. We test this premise at the 4-bit weight-and-activation precisions now being deployed, treating the change in loss f(S) from quantizing a layer set S as a set function on the Boolean cube and analyzing it through two classical changes of basis. This analysis yields two findings. First, across configurations drawn from the deployment distribution, 85--93\% of the variance of f is explained by per-layer effects alone. Second, a monotone transform of a sum of per-layer terms reproduces f's ranking of configurations, misordering at most 2\% of pairs. We propose the coverage model f(S)=cbigl(1-prod_{iin S}(1-a_i)bigr), which reproduces the measured variance profile of f to within a few percent from its L fitted break-rates. This structure supports two predictors of a configuration's loss, each with L+1 parameters. The additive model is the optimal first-order predictor. By Parseval's identity its mean-squared error equals the variance of f left unexplained by per-layer effects, which we measure on full lattices, estimate out of sample at full-network scale, and report with every result as a certificate of how well any additive model can do. The coverage model itself is the second predictor. As allocators at matched memory, they attain the lowest KL divergence among the compared allocators on models from 30B to 355B parameters. Below four bits, the resulting allocations continue to solve code and reasoning tasks at budgets where allocations from gradient sensitivities no longer produce terminating generations.

Distillation attacks create a deployment trade-off for model providers: the same outputs that make a model more useful can also make it easier to imitate. We study this trade-off through a minimax game between a utility-constrained teacher and an adaptive student. Our framework yields tractable one-sided response rules: an adaptive evaluation rule in which the student reweights high-value examples, and a teacher-side defense template that suppresses outputs most useful for distillation. From a cheap proxy for example value, we derive Product-of-Experts (PoE), a simple forward-pass-only defense that combines the teacher with a proxy student during generation. Empirically, adaptive evaluation reveals a large passive--adaptive gap: on state-of-the-art defenses, adaptive students recover substantially more capability than passive evaluation suggests on GSM8K and MATH. Under this stronger evaluation, the apparent robustness gap between expensive defenses and PoE narrows considerably, while PoE remains substantially cheaper and preserves higher-quality reasoning traces. Overall, our results suggest that strong distillation remains difficult to stop, and that progress on antidistillation should be judged against adaptive students rather than passive ones. Our code is available at: https://github.com/ysfalh/distillation-game.

Image restoration (IR) seeks to recover high-quality images from degraded observations caused by a wide range of factors, including noise, blur, compression, and adverse weather. While traditional IR methods have made notable progress by targeting individual degradation types, their specialization often comes at the cost of generalization, leaving them ill-equipped to handle the multifaceted distortions encountered in real-world applications. In response to this challenge, the all-in-one image restoration (AiOIR) paradigm has recently emerged, offering a unified framework that adeptly addresses multiple degradation types. These innovative models enhance the convenience and versatility by adaptively learning degradation-specific features while simultaneously leveraging shared knowledge across diverse corruptions. In this survey, we provide the first in-depth and systematic overview of AiOIR, delivering a structured taxonomy that categorizes existing methods by architectural designs, learning paradigms, and their core innovations. We systematically categorize current approaches and assess the challenges these models encounter, outlining research directions to propel this rapidly evolving field. To facilitate the evaluation of existing methods, we also consolidate widely-used datasets, evaluation protocols, and implementation practices, and compare and summarize the most advanced open-source models. As the first comprehensive review dedicated to AiOIR, this paper aims to map the conceptual landscape, synthesize prevailing techniques, and ignite further exploration toward more intelligent, unified, and adaptable visual restoration systems. A curated code repository is available at https://github.com/Harbinzzy/All-in-One-Image-Restoration-Survey.

Motion blur restoration on consumer mobile devices is typically evaluated using aggregate metrics that obscure performance variation across blur difficulty, masking model behavior under real deployment conditions. This work introduces iPhoneBlur, a difficulty-stratified benchmark of 7,400 image pairs synthesized from high-framerate iPhone 17 Pro videos captured in diverse real-world scenarios. Samples are partitioned into Easy, Medium, and Hard categories through PSNR-guided adaptive temporal windowing, with stratification validated by monotonic 2.2x increase in optical flow magnitude across tiers. Each sample includes comprehensive metadata enabling investigation of ISP-aware and difficulty-adaptive restoration strategies. Spectral analysis confirms synthesized blur exhibits high-frequency suppression patterns consistent with authentic motion degradation. Evaluation of six architectures reveals consistent 7-9 dB performance degradation from Easy to Hard subsets, a substantial gap entirely hidden by aggregate reporting. The benchmark further exposes a domain gap between professional and consumer cameras which targeted fine-tuning substantially recovers. By coupling difficulty stratification with deployment-critical metadata, iPhoneBlur enables systematic assessment of model reliability and failure modes for resource-constrained edge systems.

The issue localization task aims to identify the locations in a software repository that requires modification given a natural language issue description. This task is fundamental yet challenging in automated software engineering due to the semantic gap between issue description and source code implementation. This gap manifests as two mismatches:(1) symptom-to-cause mismatches, where descriptions do not explicitly reveal underlying root causes; (2) one-to-many mismatches, where a single issue corresponds to multiple interdependent code entities. To address these two mismatches, we propose GraphLocator, an approach that mitigates symptom-to-cause mismatches through causal structure discovering and resolves one-to-many mismatches via dynamic issue disentangling. The key artifact is the causal issue graph (CIG), in which vertices represent discovered sub-issues along with their associated code entities, and edges encode the causal dependencies between them. The workflow of GraphLocator consists of two phases: symptom vertices locating and dynamic CIG discovering; it first identifies symptom locations on the repository graph, then dynamically expands the CIG by iteratively reasoning over neighboring vertices. Experiments on three real-world datasets demonstrates the effectiveness of GraphLocator: (1) Compared with baselines, GraphLocator achieves more accurate localization with average improvements of +19.49% in function-level recall and +11.89% in precision. (2) GraphLocator outperforms baselines on both symptom-to-cause and one-to-many mismatch scenarios, achieving recall improvement of +16.44% and +19.18%, precision improvement of +7.78% and +13.23%, respectively. (3) The CIG generated by GraphLocator yields the highest relative improvement, resulting in a 28.74% increase in performance on downstream resolving task.

Recently, using diffusion models for zero-shot image restoration (IR) has become a new hot paradigm. This type of method only needs to use the pre-trained off-the-shelf diffusion models, without any finetuning, and can directly handle various IR tasks. The upper limit of the restoration performance depends on the pre-trained diffusion models, which are in rapid evolution. However, current methods only discuss how to deal with fixed-size images, but dealing with images of arbitrary sizes is very important for practical applications. This paper focuses on how to use those diffusion-based zero-shot IR methods to deal with any size while maintaining the excellent characteristics of zero-shot. A simple way to solve arbitrary size is to divide it into fixed-size patches and solve each patch independently. But this may yield significant artifacts since it neither considers the global semantics of all patches nor the local information of adjacent patches. Inspired by the Range-Null space Decomposition, we propose the Mask-Shift Restoration to address local incoherence and propose the Hierarchical Restoration to alleviate out-of-domain issues. Our simple, parameter-free approaches can be used not only for image restoration but also for image generation of unlimited sizes, with the potential to be a general tool for diffusion models. Code: https://github.com/wyhuai/DDNM/tree/main/hq_demo

KV-cache eviction caps the memory cost of long reasoning traces but is inherently lossy because the model decodes from a partial view of its history. Under aggressive budgets, this not only lowers accuracy but can also cause runaway degeneration, where the model produces incoherent or repetitive tokens until reaching the length limit. We characterize much of this loss as an information gapf caused by missing context, rather than a capability gap caused by limited model capacity. An evicted 7B model and a full-context 1.5B model make complementary errors, and an oracle choice between their answers recovers 79% of the accuracy gap to the full-KV 7B model. Based on this observation, we propose KV-Rescue, a training-free inference framework that bridges the information gap introduced by KV eviction using a lightweight full-context helper. KV-Rescue interleaves reasoning steps from the two models into a shared trajectory. An online detector uses entropy and compressibility to terminate the generation of incoherent or repetitive base-model candidates early. Across five math benchmarks with Qwen2.5-Math 7B and 72B, KV-Rescue recovers an average of 87% of the accuracy lost to eviction at eviction budget B=64. A decode-cost analysis further shows that preventing runaway degeneration cuts base-model token generation by 43% on average.

Image inpainting has made significant advances in recent years. However, it is still challenging to recover corrupted images with both vivid textures and reasonable structures. Some specific methods only tackle regular textures while losing holistic structures due to the limited receptive fields of convolutional neural networks (CNNs). On the other hand, attention-based models can learn better long-range dependency for the structure recovery, but they are limited by the heavy computation for inference with large image sizes. To address these issues, we propose to leverage an additional structure restorer to facilitate the image inpainting incrementally. The proposed model restores holistic image structures with a powerful attention-based transformer model in a fixed low-resolution sketch space. Such a grayscale space is easy to be upsampled to larger scales to convey correct structural information. Our structure restorer can be integrated with other pretrained inpainting models efficiently with the zero-initialized residual addition. Furthermore, a masking positional encoding strategy is utilized to improve the performance with large irregular masks. Extensive experiments on various datasets validate the efficacy of our model compared with other competitors. Our codes are released in https://github.com/DQiaole/ZITS_inpainting.

Prior white-box studies show that large language models can retain latent traces of target knowledge after unlearning, even when the knowledge is no longer expressed in their outputs. However, existing audits remain limited to one-off diagnostics: it is unclear whether these residual signals can predict future recovery under continued training or serve as reliable optimization targets. Resolving this gap is essential to determine whether internal auditing can move beyond post-hoc evaluation toward proactive risk monitoring and safer unlearning. We propose J-Access, an inference-time audit that uses the Jacobian lens to map intermediate representations into vocabulary space and measures how often target concepts remain accessible along the model's output pathway. We hypothesize that residual accessibility reflects recovery susceptibility: knowledge that remains closer to the output pathway requires less fine-tuning to restore, leading to faster recovery. We audit 398 public unlearned models spanning eight unlearning methods. We find that: (1) most unlearned models retain access above the retain-only gold level; (2) pre-attack accessibility predicts recovery speed and extent at the model level, but cannot identify which specific facts will be recovered; and (3) directly minimizing J-Access does not promote genuine deletion. Instead, the model learns to hide knowledge from the audit, producing lower audit scores but greater post-attack recovery. These findings position J-Access as a model-level diagnostic for assessing residual susceptibility in unlearned models. We argue internal audits should serve as an independent diagnostic dimension in unlearning evaluation, and should not be converted into optimization targets without validation.

Molecular line lists disagree at a level that measurably shifts retrieved C/O, so retrievals conditioned on a single list omit a dominant systematic from their error bars. Classical marginalization re-runs a full retrieval under K opacity realizations per object. We move that cost into simulation: while generating the training set we randomize opacities (smooth multiplicative Fourier fields in logν plus a discrete line-list mixture, under a deliberately broad prior informed by measured inter-list differences), so a neural posterior estimator learns an already-marginalized posterior. Conceptually, this is the amortized analogue of repeating a conventional retrieval under many plausible opacity realizations and averaging the resulting posteriors. On perturbed held-out spectra (n=2048) a standard NPE covers nominal 90% C/O intervals 43.3% of the time against 82.4% for a compute-matched marginalized network; three-seed control ensembles reach 93.2% on clean data but 61.4% under perturbation, against 89.4% marginalized, isolating the deficit as opacity-induced (TARP joint expected-coverage deviation 0.005 against 0.035). An axis ablation traces the gain to the continuous field (45.4% for the discrete swaps alone, 79.3% for the field alone). Applying the 105 real bad-pixel masks with median filling then collapsed the ensemble's C/O coverage from 0.901 to 0.479; retraining on the same mask distribution and pooling three such seeds returns a nominal 0.905 C/O and 0.891 overall under the full deployment path, still in simulation (n=1024, same 105 masks), at 0.21 to 0.31 of the prior width. On 105 JWST/G395H spectral products of 13 late-T/Y dwarfs, single marginalized networks bracket the Hood et al. (2024) T8 benchmark C/O where the control excludes it, a consistency check rather than a validation, at 1.6-2.6x wider intervals.

Image quality is a critical factor in delivering visually appealing content on web platforms. However, images often suffer from degradation due to lossy operations applied by online social networks (OSNs), negatively affecting user experience. Image restoration is the process of recovering a clean high-quality image from a given degraded input. Recently, multi-task (all-in-one) image restoration models have gained significant attention, due to their ability to simultaneously handle different types of image degradations. However, these models often come with an excessively high number of trainable parameters, making them computationally inefficient. In this paper, we propose a strategy for compressing multi-task image restoration models. We aim to discover highly sparse subnetworks within overparameterized deep models that can match or even surpass the performance of their dense counterparts. The proposed model, namely MIR-L, utilizes an iterative pruning strategy that removes low-magnitude weights across multiple rounds, while resetting the remaining weights to their original initialization. This iterative process is important for the multi-task image restoration model's optimization, effectively uncovering "winning tickets" that maintain or exceed state-of-the-art performance at high sparsity levels. Experimental evaluation on benchmark datasets for the deraining, dehazing, and denoising tasks shows that MIR-L retains only 10% of the trainable parameters while maintaining high image restoration performance. Our code, datasets and pre-trained models are made publicly available at https://github.com/Thomkat/MIR-L.

Vision-language-action (VLA) models let robots follow language instructions, but their language backbones of several billion parameters are the main obstacle to running them on robot hardware. Structured pruning reduces that backbone, and removing 63% of it from OpenVLA-OFT drops LIBERO-Long success from 93.2% to 0.8%. A recent approach restores such a model with supervised fine-tuning followed by reinforcement learning, which needs online rollouts and hundreds of GPU-hours. We recover most of the lost success entirely offline. Width pruning narrows the blocks but keeps the residual stream at its original size, so teacher and student hidden states have the same shape and are matched directly, without a projector. Training against a cache built in one teacher pass lifts the 63%-reduced student to within 3.5 points of the teacher in about 8 GPU-hours. A sweep over nine ratios locates where the recovery objective starts to matter. Up to 45% reduction the two do not differ significantly on OpenVLA-OFT. Hidden-state distillation then adds +2.1 to +4.5 points there between 63% and 87%, and +9.4 to +22.1 points on CogACT from 63% onward. At 81% on CogACT, a tripled recovery budget narrows the distilled student's gap to the teacher to 3.9 points on average, while supervised recovery stays more than 20 points below. At matched compression, width pruning yields higher success and depth pruning lower latency. On a 6-DoF manipulator, the distilled student at 72% reduction reaches 77.5% success against 59.5% for supervised recovery, runs 2.23x faster on-board than the teacher, and uses 62% less memory.

Reinforcement Learning with Verifiable Rewards (RLVR) is increasingly viewed as a tree pruning mechanism. However, we identify a systemic pathology termed Recursive Space Contraction (RSC), an irreversible collapse driven by the combined dynamics of positive sharpening and negative squeezing, where the sampling probability of valid alternatives vanishes. While Kullback-Leibler (KL) regularization aims to mitigate this, it imposes a rigid Shape Matching constraint that forces the policy to mimic the reference model's full density, creating a gradient conflict with the sharpening required for correctness. We propose Anchored Policy Optimization (APO), shifting the paradigm from global Shape Matching to Support Coverage. By defining a Safe Manifold based on the reference model's high-confidence support, APO permits aggressive sharpening for efficiency while selectively invoking a restorative force during error correction to prevent collapse. We theoretically derive that APO serves as a gradient-aligned mechanism to maximize support coverage, enabling an Elastic Recovery that re-inflates valid branches. Empirical evaluations on mathematical benchmarks demonstrate that APO breaks the accuracy-diversity trade-off, significantly improving Pass@1 while restoring the Pass@K diversity typically lost by standard policy gradient methods.

Tool-using AI agents are increasingly deployed across enterprise software systems, yet widely used benchmarks primarily evaluate nominal task completion, conflating baseline planning competence with operational fault recovery. We introduce UndoBench, a benchmark spanning 36 base workflows and 36 fault scenarios across 8 enterprise domains, decoupling task competence from recovery capability via counterfactual paired trials under identical seeds alongside wire-level effect-history and environment-state oracles. On 12 held-out TEST workflows across two open-weight models, two frameworks, and three recovery paradigms (5,760 executions / 2,880 paired trials) in the frozen lost-acknowledgment study, nominal competence reached 83.54% while conditional recovery success rate (CRSR) fell to 46.72%, with naive retry producing duplicate external effects in 53.33% of trials. Extensions to commercial API models reproduced this competence-recovery separation. Evaluations across complementary execution boundaries show that recovery is phase-dependent: before mutation, methods perform similarly without duplicate effects among capable trials; during partial mutation, naive retry, per-call idempotency, and zero-privilege journaling collapse on the evaluated composite workflows; after commit but before acknowledgment, verification and server-side idempotency substantially improve safety. These findings demonstrate that evaluating nominal completion alone masks critical, phase-dependent recovery vulnerabilities in autonomous agents.

Global operations, such as global average pooling, are widely used in top-performance image restorers. They aggregate global information from input features along entire spatial dimensions but behave differently during training and inference in image restoration tasks: they are based on different regions, namely the cropped patches (from images) and the full-resolution images. This paper revisits global information aggregation and finds that the image-based features during inference have a different distribution than the patch-based features during training. This train-test inconsistency negatively impacts the performance of models, which is severely overlooked by previous works. To reduce the inconsistency and improve test-time performance, we propose a simple method called Test-time Local Converter (TLC). Our TLC converts global operations to local ones only during inference so that they aggregate features within local spatial regions rather than the entire large images. The proposed method can be applied to various global modules (e.g., normalization, channel and spatial attention) with negligible costs. Without the need for any fine-tuning, TLC improves state-of-the-art results on several image restoration tasks, including single-image motion deblurring, video deblurring, defocus deblurring, and image denoising. In particular, with TLC, our Restormer-Local improves the state-of-the-art result in single image deblurring from 32.92 dB to 33.57 dB on GoPro dataset. The code is available at https://github.com/megvii-research/tlc.

Large language model (LLM) agents are increasingly used for multi-step, stateful tool-use tasks, yet production reliability remains limited. Unlike static software repair, agent repair must recover dynamic trajectories whose early decisions can propagate into later errors and external state changes. Existing automatic remedies address only part of this problem: blind retry adds no diagnosis, outcome feedback says whether a run failed but not where or why, and self-reflection often lacks grounded evidence to prevent the same failure from recurring. We present AgentTether, a run-time repair framework that automates post-run diagnosis and guided recovery without modifying the underlying agent or environment. AgentTether abstracts each run into Transition Units, links them through a dependency-aware Critical Transition Graph, and localizes failure-critical subtrajectories by combining an offline normal-behavior model with a run-local graph detector. It then converts the localized cause into behavior-scoped guidance backed by cross-iteration Repair Memory, and can optionally apply guarded run-time intervention to keep the correction active during re-execution. The same design can be deployed as an offline diagnostic-and-guidance tool or as an online repair layer. We evaluate AgentTether on 261 tau-bench tasks across three domains with Qwen3.7-max, and test cross-model transfer on Banking with GPT-5.4. On the hardest Banking domain, AgentTether repairs 59.04% (49/83) of initially failed Qwen3.7-max tasks and 65.12% (56/86) of initially failed GPT-5.4 tasks. Overall, AgentTether improves repair effectiveness while reducing agent turns and end-to-end approach tokens, suggesting a practical reliability layer that can wrap existing agent deployments, reduce wasted re-execution, and improve recovery without retraining the agent.

Image inpainting is the task of plausibly restoring missing pixels within a hole region that is to be removed from a target image. Most existing technologies exploit patch similarities within the image, or leverage large-scale training data to fill the hole using learned semantic and texture information. However, due to the ill-posed nature of the inpainting task, such methods struggle to complete larger holes containing complicated scenes. In this paper, we propose TransFill, a multi-homography transformed fusion method to fill the hole by referring to another source image that shares scene contents with the target image. We first align the source image to the target image by estimating multiple homographies guided by different depth levels. We then learn to adjust the color and apply a pixel-level warping to each homography-warped source image to make it more consistent with the target. Finally, a pixel-level fusion module is learned to selectively merge the different proposals. Our method achieves state-of-the-art performance on pairs of images across a variety of wide baselines and color differences, and generalizes to user-provided image pairs.

Recently, considerable progress has been made in all-in-one image restoration. Generally, existing methods can be degradation-agnostic or degradation-aware. However, the former are limited in leveraging degradation-specific restoration, and the latter suffer from the inevitable error in degradation estimation. Consequently, the performance of existing methods has a large gap compared to specific single-task models. In this work, we make a step forward in this topic, and present our UniRestorer with improved restoration performance. Specifically, we perform hierarchical clustering on degradation space, and train a multi-granularity mixture-of-experts (MoE) restoration model. Then, UniRestorer adopts both degradation and granularity estimation to adaptively select an appropriate expert for image restoration. In contrast to existing degradation-agnostic and -aware methods, UniRestorer can leverage degradation estimation to benefit degradation specific restoration, and use granularity estimation to make the model robust to degradation estimation error. Experimental results show that our UniRestorer outperforms state-of-the-art all-in-one methods by a large margin, and is promising in closing the performance gap to specific single task models.

Out-of-distribution (OOD) detection is critical to building reliable machine learning systems in the open world. Researchers have proposed various strategies to reduce model overconfidence on OOD data. Among them, ReAct is a typical and effective technique to deal with model overconfidence, which truncates high activations to increase the gap between in-distribution and OOD. Despite its promising results, is this technique the best choice for widening the gap? To answer this question, we leverage the variational method to find the optimal operation and verify the necessity of suppressing abnormally low and high activations and amplifying intermediate activations in OOD detection, rather than focusing only on high activations like ReAct. This motivates us to propose a novel technique called ``Variational Rectified Activation (VRA)'', which simulates these suppression and amplification operations using piecewise functions. Experimental results on multiple benchmark datasets demonstrate that our method outperforms existing post-hoc strategies. Meanwhile, VRA is compatible with different scoring functions and network architectures. \textcolor[rgb]{0.93,0.0,0.47}{Our code can be found in Supplementary Material}.

Data-centric curation pipelines frequently rely on model confidence scores to flag and filter noisy or mislabeled training instances. Evaluating this filtering convention on a large-scale consumer lending sample (LendingClub, N = 1,344,936) uncovers an underlying demographic asymmetry: high-income defaulters are disproportionately classified as label noise relative to low-income defaulters (Cramer's V approximately 0.03-0.07). Re-examining this behavior through the lens of equal opportunity [Hardt et al., 2016] reveals a far more severe discrepancy: a 16.86 percentage point gap in true positive rate (recall) between high- and low-income borrowers who ultimately defaulted. Implementing a sequential feature-blinding methodology allows us to isolate the drivers of this disparity across three distinct mechanisms: (1) direct reliance on self-reported applicant income; (2) algorithmic absorption of upstream institutional bias encoded within origination interest rates; and (3) a residual disparity (3.55 percentage points in cross-validation; 2.56 percentage points on a held-out test partition, Z = -4.04, p < 0.0001) that remains even after purging both income and interest rates from the model. Out-of-sample signed SHAP valuations demonstrate that this residual gap is maintained by structural proxies, most notably loan amount and home ownership status. These empirical findings show that simply blinding an algorithm to sensitive attributes fails to ensure fairness when institutional pricing decisions and behavioral proxy variables collectively reconstruct the omitted signals. We outline the practical implications of these findings for auditing data-centric AI workflows within regulated financial institutions.

We study community recovery in the sparse symmetric stochastic block model with q communities, average degree d and signal strength λ through statistical decision theory and Fisher information, and obtain three characterizations of the Kesten-Stigum threshold dλ^2=1 and of the information-computation gap below it. First, on each community-size profile the minimax risk of any class of rules closed under averaging and vertex relabeling equals its Bayes risk under the uniform prior; the posterior mean is the unique Bayes rule and is admissible, and the Bayes risk of degree-D polynomial rules is the trivial risk times 1-Corr_D^2. Combined with known low-degree and information-theoretic results, this gives the gap as a worst-case statement: for qge 5 there is a window below the threshold in which no low-degree rule beats the trivial risk asymptotically, while an exponential-time rule does on a set of labelings of probability 1-o(1). Second, the Fisher information about λ carried by cycle counts is a series with terms of order k(dλ^2)^k, convergent exactly when dλ^2<1; below the threshold the relative error of every unbiased cycle-based estimator of λ^k stays above an explicit constant, and every cycle-count test has success probability bounded below one. Third, the derivative of belief propagation at its uninformative fixed point multiplies a random perturbation by |λ|d per iteration, and one EM step taken there leaves λ unchanged. A signal-to-noise computation recovers the condition dλ^{1/χ}>1 of Chin et al. for q=n^χ communities and identifies personalized PageRank as a walk count with suboptimal weights. Experiments on networks with up to 3times 10^5 vertices confirm the threshold for q=2, the hard window for q=5, and the many-community scaling.

Despite recent advances in 3D human mesh reconstruction, domain gap between training and test data is still a major challenge. Several prior works tackle the domain gap problem via test-time adaptation that fine-tunes a network relying on 2D evidence (e.g., 2D human keypoints) from test images. However, the high reliance on 2D evidence during adaptation causes two major issues. First, 2D evidence induces depth ambiguity, preventing the learning of accurate 3D human geometry. Second, 2D evidence is noisy or partially non-existent during test time, and such imperfect 2D evidence leads to erroneous adaptation. To overcome the above issues, we introduce CycleAdapt, which cyclically adapts two networks: a human mesh reconstruction network (HMRNet) and a human motion denoising network (MDNet), given a test video. In our framework, to alleviate high reliance on 2D evidence, we fully supervise HMRNet with generated 3D supervision targets by MDNet. Our cyclic adaptation scheme progressively elaborates the 3D supervision targets, which compensate for imperfect 2D evidence. As a result, our CycleAdapt achieves state-of-the-art performance compared to previous test-time adaptation methods. The codes are available at https://github.com/hygenie1228/CycleAdapt_RELEASE.

U-Net and its variants have been widely used in medical image segmentation. However, most current U-Net variants confine their improvement strategies to building more complex encoder, while leaving the decoder unchanged or adopting a simple symmetric structure. These approaches overlook the true functionality of the decoder: receiving low-resolution feature maps from the encoder and restoring feature map resolution and lost information through upsampling. As a result, the decoder, especially its upsampling component, plays a crucial role in enhancing segmentation outcomes. However, in 3D medical image segmentation, the commonly used transposed convolution can result in visual artifacts. This issue stems from the absence of direct relationship between adjacent pixels in the output feature map. Furthermore, plain encoder has already possessed sufficient feature extraction capability because downsampling operation leads to the gradual expansion of the receptive field, but the loss of information during downsampling process is unignorable. To address the gap in relevant research, we extend our focus beyond the encoder and introduce neU-Net (i.e., not complex encoder U-Net), which incorporates a novel Sub-pixel Convolution for upsampling to construct a powerful decoder. Additionally, we introduce multi-scale wavelet inputs module on the encoder side to provide additional information. Our model design achieves excellent results, surpassing other state-of-the-art methods on both the Synapse and ACDC datasets.

Satellite optical images, upon their on-ground receipt, offer a distorted view of the observed scene. Their restoration, including denoising, deblurring, and sometimes super-resolution, is required before their exploitation. Moreover, quantifying the uncertainties related to this restoration helps to reduce the risks of misinterpreting the image content. Deep learning methods are now state-of-the-art for satellite image restoration. Among them, direct inversion methods train a specific network for each sensor, and generally provide a point estimation of the restored image without the associated uncertainties. Alternatively, deep regularization (DR) methods learn a deep prior on target images before plugging it, as the regularization term, into a model-based optimization scheme. This allows for restoring images from several sensors with a single network and possibly for estimating associated uncertainties. In this paper, we introduce VBLE-xz, a DR method that solves the inverse problem in the latent space of a variational compressive autoencoder (CAE). We adapt the regularization strength by modulating the bitrate of the trained CAE with a training-free approach. Then, VBLE-xz estimates relevant uncertainties jointly in the latent and in the image spaces by sampling an explicit posterior estimated within variational inference. This enables fast posterior sampling, unlike state-of-the-art DR methods that use Markov chains or diffusion-based approaches. We conduct a comprehensive set of experiments on very high-resolution simulated and real Pléiades images, asserting the performance, robustness and scalability of the proposed method. They demonstrate that VBLE-xz represents a compelling alternative to direct inversion methods when uncertainty quantification is required. The code associated to this paper is available in https://github.com/MaudBqrd/VBLExz.

Korean dialect corpora are available but not redistributable: weights may be released, while reproducing training and evaluation from the underlying data cannot be. We ask how much of that supervision synthetic data recovers, and whether that recovery can be measured independently of the synthesis pipeline. We contribute KoDialectBench, 1,000 items across five regions on three axes, released as identifier hashes and scoring code so users reconstruct the items from their own licensed copy. Recovery is strongly axis-dependent: our best synthetic arm reaches 91.2% of the real-data gain on region identification but 63.7% on comprehension. On generation the answer depends on the metric: the deployed marker lexicon reports 92.3% on dialectness and 119.3% on region match, the latter exceeding the real-data reference, whereas reference-based generation reaches 72.4%. We find the marker metrics' scoring inventory is entirely contained in the inventory our transformation rules can emit. We test the effect of construction access directly with an exact-form construction-disjoint arm that withholds 20% of marker types from the rules. At exactly matched training size (8,600 examples) it reduces dialectness recovery from 91.8% to 8.1% and region-match recovery from 101.9% to 25.6% on the held-out marker inventory, while the three pipeline-independent measurements do not fall at all. A complementary evaluator sweep defines metric-construction coverage (MCC) and finds measured dialectness recovery increasing monotonically as overlap rises from MCC=0 to MCC=1. Shared construction and evaluation inventories can therefore substantially inflate estimates of synthetic-data recovery.

The presence of composite degradations poses a significant challenge, since the underlying corruption factors exhibit complex and interdependent interactions. Even when the degradation types are known, accurately restoring the image remains difficult due to the intertwined nature of their effects and the need for selective control during the recovery process. To address this, we introduce CURE, a unified framework that enables controllable restoration in complex degradation settings by learning disentangled and adjustable representations. CURE is driven by four complementary objectives. First, an identity embedding is incorporated, along with a reconstruction constraint, to ensure that the model can reproduce the input image when restoration is unnecessary. Second, the ratio control mechanism blends the identity embedding with degradation-specific embeddings using user-regulated mixing ratios, allowing continuous control over restoration intensity. Third, an intermediate loss is applied to supervise stepwise outputs, each encouraged to tackle the removal of only a single degradation factor within a composite mixture. Finally, a permutation-invariant loss ensures that the model achieves consistent restoration quality regardless of the order in which multiple degradations are addressed. Since CURE modifies only the training strategy and not the underlying network architecture, it can be seamlessly integrated into existing controllable restoration models. Experiments demonstrate that CURE delivers state-of-the-art performance on composite degradation benchmarks, while enabling both selective and jointly fused restoration through flexible modulation of embedding ratios. The code and dataset are available at https://github.com/bo-oseng/CURE.

Image restoration models are typically trained with a pixel-wise distance loss defined over the RGB color representation space, which is well known to be a source of blurry and unrealistic textures in the restored images. The reason, we believe, is that the three-channel RGB space is insufficient for supervising the restoration models. To this end, we augment the representation to hold structural information of local neighborhoods at each pixel while keeping the color information and pixel-grainedness unharmed. The result is a new representation space, dubbed augmented RGB (aRGB) space. Substituting the underlying representation space for the per-pixel losses facilitates the training of image restoration models, thereby improving the performance without affecting the evaluation phase. Notably, when combined with auxiliary objectives such as adversarial or perceptual losses, our aRGB space consistently improves overall metrics by reconstructing both color and local structures, overcoming the conventional perception-distortion trade-off.

We consider the problem of distribution-free predictive inference, with the goal of producing predictive coverage guarantees that hold conditionally rather than marginally. Existing methods such as conformal prediction offer marginal coverage guarantees, where predictive coverage holds on average over all possible test points, but this is not sufficient for many practical applications where we would like to know that our predictions are valid for a given individual, not merely on average over a population. On the other hand, exact conditional inference guarantees are known to be impossible without imposing assumptions on the underlying distribution. In this work we aim to explore the space in between these two, and examine what types of relaxations of the conditional coverage property would alleviate some of the practical concerns with marginal coverage guarantees while still being possible to achieve in a distribution-free setting.

Given only a few observed entries from a low-rank matrix X, matrix completion is the problem of imputing the missing entries, and it formalizes a wide range of real-world settings that involve estimating missing data. However, when there are too few observed entries to complete the matrix, what other aspects of the underlying matrix can be reliably recovered? We study one such problem setting, that of "one-sided" matrix completion, where our goal is to recover the right singular vectors of X, even in the regime where recovering the left singular vectors is impossible, which arises when there are more rows than columns and very few observations. We propose a natural algorithm that involves imputing the missing values of the matrix X^TX and show that even with only two observations per row in X, we can provably recover X^TX as long as we have at least Omega(r^2 d log d) rows, where r is the rank and d is the number of columns. We evaluate our algorithm on one-sided recovery of synthetic data and low-coverage genome sequencing. In these settings, our algorithm substantially outperforms standard matrix completion and a variety of direct factorization methods.

In real-world scenarios, image impairments often manifest as composite degradations, presenting a complex interplay of elements such as low light, haze, rain, and snow. Despite this reality, existing restoration methods typically target isolated degradation types, thereby falling short in environments where multiple degrading factors coexist. To bridge this gap, our study proposes a versatile imaging model that consolidates four physical corruption paradigms to accurately represent complex, composite degradation scenarios. In this context, we propose OneRestore, a novel transformer-based framework designed for adaptive, controllable scene restoration. The proposed framework leverages a unique cross-attention mechanism, merging degraded scene descriptors with image features, allowing for nuanced restoration. Our model allows versatile input scene descriptors, ranging from manual text embeddings to automatic extractions based on visual attributes. Our methodology is further enhanced through a composite degradation restoration loss, using extra degraded images as negative samples to fortify model constraints. Comparative results on synthetic and real-world datasets demonstrate OneRestore as a superior solution, significantly advancing the state-of-the-art in addressing complex, composite degradations.

We study fact-level repair for multimodal generation, where a fluent output may contain specific facts that are not supported by the input. Existing inference-time repair methods often generate feedback by jointly conditioning on the input and the current output. This design has two limitations: hallucinated claims in the output can bias the model's interpretation of the input, and free-form feedback cannot be ranked or scheduled at the fact level. We present TIGER, an inference-time framework that redesigns feedback for localized repair. TIGER independently extracts an observation graph from the input and a claim graph from the current output, then assigns each claim a graph-conditioned risk score based on support and conflict. The model repairs selected high-risk claims while keeping the backbone frozen. We provide a convergence analysis showing that the expected total risk decreases geometrically to an explicit asymptotic bound under mild assumptions. Experiments across four cross-modal paths, including image-to-text, image+text-to-text, audio-to-text, and video-to-text, show that TIGER reduces unsupported content while preserving task quality. The gains hold across multiple backbones, and a CrisisFACTS case study suggests that the same repair mechanism can improve grounding in multi-source settings.

3D Gaussian Splatting (3DGS) can reconstruct a captured scene photorealistically, but the resulting representation does not by itself support physical interaction. Robot simulation instead requires object-level change, i.e., objects must move independently, make contact, and reveal previously occluded surroundings. This gap arises because object appearance may remain entangled with the background, while hidden object geometry and occluded background content may be unobserved. To address this challenge, we present ϕ-RIE, a Gaussian-native pipeline that converts selected objects into movable simulator assets while preserving the remaining reconstruction. Our key observation is that asset construction and source removal should be coupled, i.e., one object identity should define the movable asset and the scene content to remove and complete. Accordingly, Scene Observation supplies shared evidence to Coupled Scene Construction, which creates registered assets and completed background Gaussians for simulator-driven rendering in an Interactive Environment. This coupling preserves unedited Gaussians while aligning visual and physical state. On 50 ScanNet++ scenes, evidence-based selection and registration retry increase matched F1 at 20\,mm from 0.336 to 0.383 at fixed retention. Further tests demonstrate asset executability, manipulation gains over a single-generator baseline, and the visual cost of conversion. Together, these results demonstrate that \name\ enables interactive scene conversion.

Recent advancements in diffusion models revolutionize image generation but pose risks of misuse, such as replicating artworks or generating deepfakes. Existing image protection methods, though effective, struggle to balance protection efficacy, invisibility, and latency, thus limiting practical use. We introduce perturbation pre-training to reduce latency and propose a mixture-of-perturbations approach that dynamically adapts to input images to minimize performance degradation. Our novel training strategy computes protection loss across multiple VAE feature spaces, while adaptive targeted protection at inference enhances robustness and invisibility. Experiments show comparable protection performance with improved invisibility and drastically reduced inference time. The code and demo are available at https://webtoon.github.io/impasto

Training-free token reduction accelerates vision transformers by removing redundant tokens across layers, recovering most of the original accuracy at a fraction of the compute. These methods, however, are designed and evaluated primarily on clean data, and under real-world distribution shift their accuracy gap to the uncompressed model widens with the removal rate. We show that this gap is governed by the reduction schedule, the depth profile of removal, usually left fixed as an implementation detail. Concretely, we introduce a one-parameter late-concentrated power-law schedule that consistently improves out-of-distribution accuracy over flat at no extra inference cost. On ImageNet-C with DeiT-S, the late schedule closes 83% of that gap at a 26% compute reduction (+1.17pp), and 99% of it at a lighter 7% reduction (+0.26pp). The gain cannot be attributed to retaining more tokens or using extra compute: held to flat's compute, the late schedule removes more tokens in total and leaves fewer tokens at the end, yet still wins. Single-layer probes point to a mechanism: earlier reductions perturb features that pass through more remaining layers, front-loading reduction error in depth. The effect is broad, holding across five token-reduction methods (ToMe, EViT, ATS, ATC, PiToMe), nine backbones, all ImageNet-C corruption types, eight further shift suites, and two further modalities, video and vision-language QA. It is also specific to shift, still positive on clean and rising monotonically to ~4x that at the highest severity 5. The schedule keeps its gain under six test-time adaptation methods, and needs no per-input or per-domain tuning.

In many real-world scenarios, obtaining fully observed samples is prohibitively expensive or even infeasible, while partial and noisy observations are comparatively easy to collect. In this work, we study distribution restoration with abundant noisy samples, assuming the corruption process is available as a black-box generator. We show that this task can be framed as a one-sided entropic optimal transport problem and solved via an EM-like algorithm. We further provide a test criterion to determine whether the true underlying distribution is recoverable under per-sample information loss, and show that in otherwise unrecoverable cases, a small number of clean samples can render the distribution largely recoverable. Building on these insights, we introduce SFBD-OMNI, a bridge model-based framework that maps corrupted sample distributions to the ground-truth distribution. Our method generalizes Stochastic Forward-Backward Deconvolution (SFBD; Lu et al., 2025) to handle arbitrary measurement models beyond Gaussian corruption. Experiments across benchmark datasets and diverse measurement settings demonstrate significant improvements in both qualitative and quantitative performance.

Due to their highly structured characteristics, faces are easier to recover than natural scenes for blind image super-resolution. Therefore, we can extract the degradation representation of an image from the low-quality and recovered face pairs. Using the degradation representation, realistic low-quality images can then be synthesized to fine-tune the super-resolution model for the real-world low-quality image. However, such a procedure is time-consuming and laborious, and the gaps between recovered faces and the ground-truths further increase the optimization uncertainty. To facilitate efficient model adaptation towards image-specific degradations, we propose a method dubbed MetaF2N, which leverages the contained Faces to fine-tune model parameters for adapting to the whole Natural image in a Meta-learning framework. The degradation extraction and low-quality image synthesis steps are thus circumvented in our MetaF2N, and it requires only one fine-tuning step to get decent performance. Considering the gaps between the recovered faces and ground-truths, we further deploy a MaskNet for adaptively predicting loss weights at different positions to reduce the impact of low-confidence areas. To evaluate our proposed MetaF2N, we have collected a real-world low-quality dataset with one or multiple faces in each image, and our MetaF2N achieves superior performance on both synthetic and real-world datasets. Source code, pre-trained models, and collected datasets are available at https://github.com/yinzhicun/MetaF2N.

Deep encoder-decoder based CNNs have advanced image inpainting methods for hole filling. While existing methods recover structures and textures step-by-step in the hole regions, they typically use two encoder-decoders for separate recovery. The CNN features of each encoder are learned to capture either missing structures or textures without considering them as a whole. The insufficient utilization of these encoder features limit the performance of recovering both structures and textures. In this paper, we propose a mutual encoder-decoder CNN for joint recovery of both. We use CNN features from the deep and shallow layers of the encoder to represent structures and textures of an input image, respectively. The deep layer features are sent to a structure branch and the shallow layer features are sent to a texture branch. In each branch, we fill holes in multiple scales of the CNN features. The filled CNN features from both branches are concatenated and then equalized. During feature equalization, we reweigh channel attentions first and propose a bilateral propagation activation function to enable spatial equalization. To this end, the filled CNN features of structure and texture mutually benefit each other to represent image content at all feature levels. We use the equalized feature to supplement decoder features for output image generation through skip connections. Experiments on the benchmark datasets show the proposed method is effective to recover structures and textures and performs favorably against state-of-the-art approaches.

GPU Confidential Computing (GPU-CC) now preserves GPU-local performance: on NVIDIA B300, BF16 matmul runs at 0.998x of non-confidential performance. Yet LLM serving under Intel TDX plus GPU-CC still loses 13-27% of throughput, and KV-cache restore latency can more than double. This paper studies that gap on two Blackwell platforms, RTX Pro 6000 and B300 HGX, and identifies its dominant cause: the confidential VM-GPU bridge, not GPU compute. We find that GPU-CC turns host/device movement into a serialized, high-setup-cost channel. Secure copies do not gain CUDA-stream concurrency within a context, asynchronous transfers block at the runtime boundary, and small crossings pay a fixed toll. This violates the assumptions of modern inference runtimes, where DMA is expected to be cheap, concurrent, and asynchronous. In vLLM dense decode, the gap closes around 44x-slower small alloc-and-copy operations; targeted patches reject alternative explanations. A scheduling flag recovers 57% of the gap, while a worker-thread drain recovers up to 92% in qualified high-concurrency runs. The same bridge model explains a +131% KV-restore penalty and a 34x model-load slowdown. Blackwell also changes the confidential tenancy unit. We qualify confidential multi-GPU NVSwitch tenants on B300, including 510 GB/s NVLink P2P inside a CVM and concurrent isolated tenants, and identify the remaining fabric-attestation gap for production confidential AI platforms.

LLM agents increasingly modify their own prompts, tools, middleware, resources, and execution harnesses at runtime. Such self-evolution can improve capability, but a successful mutation may leave persistent effects that cannot be safely reversed in states different from the one in which it was created. We introduce EvoUndo, a framework for representing, synthesizing, diagnosing, and independently verifying recoverability of model-generated self-modifications across counterfactual states. Across 600 unseen one-shot self-evolution tasks, we identify 197 capability-improving mutations that fail recoverability verification. Under the original recovery representation, conventional repair strategies recover 0/197 of these natural failures. Deterministic oracle analysis recovers 48/197 under the original recovery language L0, while the extended recovery calculus increases empirical oracle recovery to 191/197. A protocol-locked 2x2 grounding-by-expressivity intervention then separates two bottlenecks: exact state-address grounding increases successful recovery from 0/48 to 38/48 (79.2%) when the original language is sufficient, while extending the recovery language enables recovery on 142/143 (99.3%) failures in the oracle-defined S1 stratum. On the primary gpt-oss-120b backbone, adding exact-address diagnostics to the richer language reduces recovery to 133/143 (93.0%); a Qwen3.8-27B replication preserves the grounding and expressivity effects but not this negative interaction, indicating that the latter is model-dependent. These results indicate that reliable agent self-evolution requires co-designing verification, state grounding, witness semantics, and recovery-language expressivity rather than relying on iterative prompting alone.

Large language models increasingly write and repair production code, yet evidence is mounting that their test-passing patches leave codebases harder to maintain. We identify one concrete source: deletion avoidance, the systematic tendency to retain code that an intended edit requires removing. Across the five leading models on the official SWE-bench Verified leaderboard, deletion recall against the developer patch reaches at most 71.7% even on tasks all five solve, and models reach the right file for over 92% of required deletions but cut the exact line in under 52% of cases. Instead, 29.0% of passing patches wrap the targeted code in a guard or fallback, a pattern we call Guard-and-Go. Such patches pass because the original tests rarely check removal: when we retrofit 34 Verified tasks with tests that fail if the targeted code remains, four frontier models spanning closed and open weights fall from 63.2% to 41.9%. Because real repairs mix removal with addition, we curate CanItDelete, a benchmark of 200 tasks mined from real commits whose entire required edit is deletion. Even with the addition work gone, the best model still fails one task in five, and smaller open models fall to 18.0%. We then ablate GPT-5.6 Sol under four cumulative prompts; success moves little until we supply the exact lines, which nearly eliminate incomplete deletion yet raise success only to 80.5% because the model then deletes beyond the spans or adds code instead. Finally, through a pilot study we show one potential fix: teaching deletion during post-training reduces deletion avoidance and improves broader code-editing performance, suggesting the behavior is undertrained rather than beyond reach.

Membership inference (MIA) on language models is usually summarised by aggregate ROC-AUC, but such evaluations are confounded: model-free blind baselines can separate members from non-members using surface text alone. Building on probabilistic discoverable extraction, we study black-box training-data leakage using N samples from p_theta(. | x), placing mean overlap, extreme-value overlap, and self-concentration on a common functional-estimation footing. On WikiMIA, a blind bag-of-words classifier reaches AUC 0.97 (TPR 0.90 at 5% FPR) while sampling adds nothing. On an IID Pile split (MIMIR), neither self-concentration nor gold-continuation recovery significantly exceeds a blind baseline in aggregate. Aggregate metrics hide the real harm: sampling verbatim-extracts training data for a tail of documents no blind attack can reach. On Pythia-6.9B, 16.6% of 500 Pile documents bearing a real identifier (83 documents; 21.3% of those bearing an email address) have that identifier reproduced and not reproduced under a mismatched-prefix control. Each leak is attributable to that document rather than a globally common string. This per-document disclosure is invisible to aggregate AUC. Risk is uneven: identifier leakage is about 3x stronger in code than prose, though prose remains positive and grows with capacity (4.0% to 12.1% from 410M to 6.9B); recovery of arbitrary held-out continuations is essentially confined to code (+0.44 member gap on GitHub vs at most +0.014 on prose). Temperature and nucleus sampling have minor effect, a 16-token prefix suffices, and the sample-budget relationship corroborates prior probabilistic-extraction results. We detect no reduction from deduplication. Privacy audits should report per-document extraction, not only aggregate membership, and motivate differential privacy as the mitigation. We release leakit, a black-box tool implementing this probe and its control.

In this paper, we propose RI3D, a novel 3DGS-based approach that harnesses the power of diffusion models to reconstruct high-quality novel views given a sparse set of input images. Our key contribution is separating the view synthesis process into two tasks of reconstructing visible regions and hallucinating missing regions, and introducing two personalized diffusion models, each tailored to one of these tasks. Specifically, one model ('repair') takes a rendered image as input and predicts the corresponding high-quality image, which in turn is used as a pseudo ground truth image to constrain the optimization. The other model ('inpainting') primarily focuses on hallucinating details in unobserved areas. To integrate these models effectively, we introduce a two-stage optimization strategy: the first stage reconstructs visible areas using the repair model, and the second stage reconstructs missing regions with the inpainting model while ensuring coherence through further optimization. Moreover, we augment the optimization with a novel Gaussian initialization method that obtains per-image depth by combining 3D-consistent and smooth depth with highly detailed relative depth. We demonstrate that by separating the process into two tasks and addressing them with the repair and inpainting models, we produce results with detailed textures in both visible and missing regions that outperform state-of-the-art approaches on a diverse set of scenes with extremely sparse inputs.

In multi-task learning (MTL), gradient balancing has recently attracted more research interest than loss balancing since it often leads to better performance. However, loss balancing is much more efficient than gradient balancing, and thus it is still worth further exploration in MTL. Note that prior studies typically ignore that there exist varying improvable gaps across multiple tasks, where the improvable gap per task is defined as the distance between the current training progress and desired final training progress. Therefore, after loss balancing, the performance imbalance still arises in many cases. In this paper, following the loss balancing framework, we propose two novel improvable gap balancing (IGB) algorithms for MTL: one takes a simple heuristic, and the other (for the first time) deploys deep reinforcement learning for MTL. Particularly, instead of directly balancing the losses in MTL, both algorithms choose to dynamically assign task weights for improvable gap balancing. Moreover, we combine IGB and gradient balancing to show the complementarity between the two types of algorithms. Extensive experiments on two benchmark datasets demonstrate that our IGB algorithms lead to the best results in MTL via loss balancing and achieve further improvements when combined with gradient balancing. Code is available at https://github.com/YanqiDai/IGB4MTL.

Bitstream-corrupted video recovery aims to restore realistic content degraded during video storage or transmission. Existing methods typically assume that predefined masks of corrupted regions are available, but manually annotating these masks is labor-intensive and impractical in real-world scenarios. To address this limitation, we introduce a new blind video recovery setting that removes the reliance on predefined masks. This setting presents two major challenges: accurately identifying corrupted regions and recovering content from extensive and irregular degradations. We propose a Metadata-Guided Diffusion Model (M-GDM) to tackle these challenges. Specifically, intrinsic video metadata are leveraged as corruption indicators through a dual-stream metadata encoder that separately embeds motion vectors and frame types before fusing them into a unified representation. This representation interacts with corrupted latent features via cross-attention at each diffusion step. To preserve intact regions, we design a prior-driven mask predictor that generates pseudo masks using both metadata and diffusion priors, enabling the separation and recombination of intact and recovered regions through hard masking. To mitigate boundary artifacts caused by imperfect masks, a post-refinement module enhances consistency between intact and recovered regions. Extensive experiments demonstrate the effectiveness of our method and its superiority in blind video recovery. Code is available at: https://github.com/Shuyun-Wang/M-GDM.

We derive a simple and model-independent formula for the change in the generalization gap due to a gradient descent update. We then compare the change in the test error for stochastic gradient descent to the change in test error from an equivalent number of gradient descent updates and show explicitly that stochastic gradient descent acts to regularize generalization error by decorrelating nearby updates. These calculations depends on the details of the model only through the mean and covariance of the gradient distribution, which may be readily measured for particular models of interest. We discuss further improvements to these calculations and comment on possible implications for stochastic optimization.

Large language models achieve strong performance across diverse tasks, but deployment remains costly because of memory, latency, and energy demands. Structured pruning reduces these costs by removing architectural components, yet its recovery stage is often limited by a mismatch between the recovery module's representational capacity and the complexity of the removed knowledge. We call this bottleneck the capacity-knowledge asymmetry and propose OverRep, an Overcomplete Reparameterization framework for structured LLM pruning. Following the principle of "train overcomplete, deploy compact", OverRep temporarily overparameterizes the recovery module during training to absorb complex knowledge distilled from the original model. After recovery, the overcomplete re-parameterization is algebraically merged into a mathematically equivalent compact module, preserving the pruned model's inference-time architecture and computational cost. OverRep further introduces an annealed activation that enables nonlinear training dynamics while converging to a linear regime for exact algebraic merging. Across three backbone families, OverRep improves retained reasoning performance over strong recovery baselines by up to 5.5 and 8.4 points at 25% and 50% pruning, respectively, while keeping memory usage and TFLOPs comparable to existing recovery methods. Our code is available at https://github.com/mmai-laboratory/OverRep.