Daily Papers

Using the CLEO-c detector at the Cornell Electron Storage Ring, we have measured inclusive and exclusive cross sections for the production of D+, D0 and Ds+ mesons in e+e- annihilations at thirteen center-of-mass energies between 3.97 and 4.26 GeV. Exclusive cross sections are presented for final states consisting of two charm mesons (DD, D*D, D*D*, Ds+Ds-, Ds*+Ds-, and Ds*+Ds*-) and for processes in which the charm-meson pair is accompanied by a pion. No enhancement in any final state is observed at the energy of the Y(4260).

This paper presents measurements of W^{pm}Z production cross sections in pp collisions at a centre-of-mass energy of 13 TeV. The data were collected in 2015 and 2016 by the ATLAS experiment at the Large Hadron Collider, and correspond to an integrated luminosity of 36.1 fb^{-1}. The W^{pm}Z candidate events are reconstructed using leptonic decay modes of the gauge bosons into electrons and muons. The measured inclusive cross section in the detector fiducial region for a single leptonic decay mode is σ_{W^pm Z rightarrow ell^{'} νell ell}^{fid.} = 63.7 pm 1.0 (stat.) pm 2.3 (syst.) pm 1.4 (lumi.) fb, reproduced by the next-to-next-to-leading-order Standard Model prediction of 61.5^{+1.4}_{-1.3} fb. Cross sections for W^+Z and W^-Z production and their ratio are presented as well as differential cross sections for several kinematic observables. An analysis of angular distributions of leptons from decays of W and Z bosons is performed for the first time in pair-produced events in hadronic collisions, and integrated helicity fractions in the detector fiducial region are measured for the W and Z bosons separately. Of particular interest, the longitudinal helicity fraction of pair-produced vector bosons is also measured.

Inclusive and differential cross sections for Higgs boson production in proton-proton collisions at a centre-of-mass energy of 13.6 TeV are measured using data collected with the CMS detector at the LHC in 2022, corresponding to an integrated luminosity of 34.7 fb^{-1}. Events with the diphoton final state are selected, and the measured inclusive fiducial cross section is sigma_fid = 74 pm 11 (stat) ^{+5}_{-4} (syst) fb, in agreement with the standard model prediction of 67.8 pm 3.8 fb. Differential cross sections are measured as functions of several observables: the Higgs boson transverse momentum and rapidity, the number of associated jets, and the transverse momentum of the leading jet in the event. Within the uncertainties, the differential cross sections agree with the standard model predictions.

In the frame of a systematical study of light ion induced nuclear reactions on hafnium, activation cross sections for proton induced reactions were investigated. Excitation functions were measured in the 38 to 65 MeV energy range for the ^{nat}Hf(p,xn)^{180g,177,176,175,173}Ta, ^{nat}Hf(p,x)^{180m,179m,175,173,172,171}Hf, ^{177g,173,172,171,170,169}Lu and ^{nat}Hf(p,x)^{169}Yb reactions by using the activation method, combining stacked foil irradiation and off line gamma ray spectroscopy. The experimental results are compared with earlier results in the overlapping energy range, and with the theoretical predictions of the ALICE IPPE and EMPIRE theoretical codes and of the TALYS code reported in the TENDL2015 and TENDL2017 libraries. The production routes of ^{172}Lu (and its parent ^{172}Hf) and of ^{169Y}b are reviewed.

We describe an analysis comparing the pp elastic cross section as measured by the D0 Collaboration at a center-of-mass energy of 1.96 TeV to that in pp collisions as measured by the TOTEM Collaboration at 2.76, 7, 8, and 13 TeV using a model-independent approach. The TOTEM cross sections extrapolated to a center-of-mass energy of s = 1.96 TeV are compared with the D0 measurement in the region of the diffractive minimum and the second maximum of the pp cross section. The two data sets disagree at the 3.4σ level and thus provide evidence for the t-channel exchange of a colorless, C-odd gluonic compound, also known as the odderon. We combine these results with a TOTEM analysis of the same C-odd exchange based on the total cross section and the ratio of the real to imaginary parts of the forward elastic scattering amplitude in pp scattering. The combined significance of these results is larger than 5σ and is interpreted as the first observation of the exchange of a colorless, C-odd gluonic compound.

Reconstructing 3D shapes from planar cross-sections is a challenge inspired by downstream applications like medical imaging and geographic informatics. The input is an in/out indicator function fully defined on a sparse collection of planes in space, and the output is an interpolation of the indicator function to the entire volume. Previous works addressing this sparse and ill-posed problem either produce low quality results, or rely on additional priors such as target topology, appearance information, or input normal directions. In this paper, we present OReX, a method for 3D shape reconstruction from slices alone, featuring a Neural Field as the interpolation prior. A modest neural network is trained on the input planes to return an inside/outside estimate for a given 3D coordinate, yielding a powerful prior that induces smoothness and self-similarities. The main challenge for this approach is high-frequency details, as the neural prior is overly smoothing. To alleviate this, we offer an iterative estimation architecture and a hierarchical input sampling scheme that encourage coarse-to-fine training, allowing the training process to focus on high frequencies at later stages. In addition, we identify and analyze a ripple-like effect stemming from the mesh extraction step. We mitigate it by regularizing the spatial gradients of the indicator function around input in/out boundaries during network training, tackling the problem at the root. Through extensive qualitative and quantitative experimentation, we demonstrate our method is robust, accurate, and scales well with the size of the input. We report state-of-the-art results compared to previous approaches and recent potential solutions, and demonstrate the benefit of our individual contributions through analysis and ablation studies.

A fully differential calculation in perturbative quantum chromodynamics is presented for the production of massive photon pairs at hadron colliders. All next-to-leading order perturbative contributions from quark-antiquark, gluon-(anti)quark, and gluon-gluon subprocesses are included, as well as all-orders resummation of initial-state gluon radiation valid at next-to-next-to-leading logarithmic accuracy. The region of phase space is specified in which the calculation is most reliable. Good agreement is demonstrated with data from the Fermilab Tevatron, and predictions are made for more detailed tests with CDF and DO data. Predictions are shown for distributions of diphoton pairs produced at the energy of the Large Hadron Collider (LHC). Distributions of the diphoton pairs from the decay of a Higgs boson are contrasted with those produced from QCD processes at the LHC, showing that enhanced sensitivity to the signal can be obtained with judicious selection of events.

Reconstructing complex structures from planar cross-sections is a challenging problem, with wide-reaching applications in medical imaging, manufacturing, and topography. Out-of-the-box point cloud reconstruction methods can often fail due to the data sparsity between slicing planes, while current bespoke methods struggle to reconstruct thin geometric structures and preserve topological continuity. This is important for medical applications where thin vessel structures are present in CT and MRI scans. This paper introduces CrossSDF, a novel approach for extracting a 3D signed distance field from 2D signed distances generated from planar contours. Our approach makes the training of neural SDFs contour-aware by using losses designed for the case where geometry is known within 2D slices. Our results demonstrate a significant improvement over existing methods, effectively reconstructing thin structures and producing accurate 3D models without the interpolation artifacts or over-smoothing of prior approaches.

We present the wakefield conformal mapping technique that can be readily applied to the analysis of the radiation generated by an ultra-relativistic particle in the step transition and a collimator. We derive simple analytical expressions for the lower and upper bounds of both longitudinal and transverse wake potentials. We test the derived expressions against well-known formulas in several representative examples. The proposed method can greatly simplify the optimization of collimating sections, as well as become a useful tool in the shape optimization problems.

Tissue segmentation is a routine preprocessing step to reduce the computational cost of whole slide image (WSI) analysis by excluding background regions. Traditional image processing techniques are commonly used for tissue segmentation, but often require manual adjustments to parameter values for atypical cases, fail to exclude all slide and scanning artifacts from the background, and are unable to segment adipose tissue. Pen marking artifacts in particular can be a potential source of bias for subsequent analyses if not removed. In addition, several applications require the separation of individual cross-sections, which can be challenging due to tissue fragmentation and adjacent positioning. To address these problems, we develop a convolutional neural network for tissue and pen marking segmentation using a dataset of 200 H&E stained WSIs. For separating tissue cross-sections, we propose a novel post-processing method based on clustering predicted centroid locations of the cross-sections in a 2D histogram. On an independent test set, the model achieved a mean Dice score of 0.981pm0.033 for tissue segmentation and a mean Dice score of 0.912pm0.090 for pen marking segmentation. The mean absolute difference between the number of annotated and separated cross-sections was 0.075pm0.350. Our results demonstrate that the proposed model can accurately segment H&E stained tissue cross-sections and pen markings in WSIs while being robust to many common slide and scanning artifacts. The model with trained model parameters and post-processing method are made publicly available as a Python package called SlideSegmenter.

In this paper we study quasinormal modes and absorption cross sections for the (1+3)-dimensional Bardeen black hole surrounded by perfect fluid dark matter. Studies of the massless scalar field is already done in Sun:2023slzl. Hence, in this paper we will focus on the massive scalar field perturbations and massless Dirac field perturbations. To compute the quasinormal modes we use the semi-analytical 3rd-order WKB method, which has been shown to be one of the best approaches when the effective potential is adequate and when n < ell and n < lambda. We have also utilized the P\"oschl-Teller method to compare the valus obtained using the WKB approach. We have computed quasinormal frequencies by varying various parameters of the theory such as the mass of the scalar field mu, dark matter parameter alpha and the magnetic charge g. We have summarized our solutions in tables and figures for clarity. As for the absorption cross section, we used third order WKB approach to compute reflection, transmission coefficients and partial absorption cross sections. Graphs are presented to demonstrate the behavior of the above quantities when the dark matter parameter and mass of the massive scalar field are varied.

The electron microscope (EM) remains the predominant technique for elucidating intricate details of the animal nervous system at the nanometer scale. However, accurately reconstructing the complex morphology of axons and myelin sheaths poses a significant challenge. Furthermore, the absence of publicly available, large-scale EM datasets encompassing complete cross sections of the corpus callosum, with dense ground truth segmentation for axons and myelin sheaths, hinders the advancement and evaluation of holistic corpus callosum reconstructions. To surmount these obstacles, we introduce the AxonCallosumEM dataset, comprising a 1.83 times 5.76mm EM image captured from the corpus callosum of the Rett Syndrome (RTT) mouse model, which entail extensive axon bundles. We meticulously proofread over 600,000 patches at a resolution of 1024 times 1024, thus providing a comprehensive ground truth for myelinated axons and myelin sheaths. Additionally, we extensively annotated three distinct regions within the dataset for the purposes of training, testing, and validation. Utilizing this dataset, we develop a fine-tuning methodology that adapts Segment Anything Model (SAM) to EM images segmentation tasks, called EM-SAM, enabling outperforms other state-of-the-art methods. Furthermore, we present the evaluation results of EM-SAM as a baseline.

Measurements of Higgs boson production cross-sections are carried out in the diphoton decay channel using 139 fb^{-1} of pp collision data at s = 13 TeV collected by the ATLAS experiment at the LHC. The analysis is based on the definition of 101 distinct signal regions using machine-learning techniques. The inclusive Higgs boson signal strength in the diphoton channel is measured to be 1.04^{+0.10}_{-0.09}. Cross-sections for gluon-gluon fusion, vector-boson fusion, associated production with a W or Z boson, and top associated production processes are reported. An upper limit of 10 times the Standard Model prediction is set for the associated production process of a Higgs boson with a single top quark, which has a unique sensitivity to the sign of the top quark Yukawa coupling. Higgs boson production is further characterized through measurements of Simplified Template Cross-Sections (STXS). In total, cross-sections of 28 STXS regions are measured. The measured STXS cross-sections are compatible with their Standard Model predictions, with a p-value of 93%. The measurements are also used to set constraints on Higgs boson coupling strengths, as well as on new interactions beyond the Standard Model in an effective field theory approach. No significant deviations from the Standard Model predictions are observed in these measurements, which provide significant sensitivity improvements compared to the previous ATLAS results.

Understanding electron irradiation effects is vital not only for reliable transmission electron microscopy characterization, but increasingly also for the controlled manipulation of two-dimensional materials. The displacement cross sections of monolayer hBN are measured using aberration-corrected scanning transmission electron microscopy in near ultra-high vacuum at primary beam energies between 50 and 90 keV. Damage rates below 80 keV are up to three orders of magnitude lower than previously measured at edges under poorer residual vacuum conditions where chemical etching appears to have been dominant. Notably, is possible to create single vacancies in hBN using electron irradiation, with boron almost twice as likely as nitrogen to be ejected below 80 keV. Moreover, any damage at such low energies cannot be explained by elastic knock-on, even when accounting for vibrations of the atoms. A theoretical description is developed to account for lowering of the displacement threshold due to valence ionization resulting from inelastic scattering of probe electrons, modelled using charge-constrained density functional theory molecular dynamics. Although significant reductions are found depending on the constrained charge, quantitative predictions for realistic ionization states are currently not possible. Nonetheless, there is potential for defect-engineering of hBN at the level of single vacancies using electron irradiation.

A dynamical model based on a phenomenological charm quark-nucleon(c-N) potential v_{cN} and the Pomeron-exchange mechanism is constructed to investigate the J/Psi photo-production on the nucleon from threshold to invariant mass W=300 GeV. The J/Psi-N potential,V_{J/Psi N}(r),is constructed by folding v_{cN} into the wavefunction Phi_{J/Psi}(cc) of J/Psi within a Constituent Quark Model(CQM) of Ref.[43]. A photo-production amplitude is also generated by v_{cN} by a cc-loop integration over the gammarightarrow cc vertex function and Phi_{J/Psi}(cc). No commonly used Vector Meson Dominance assumption is used to define this photo-production amplitude which is needed to describe the data near the threshold. The potential v_{cN}(r) is parameterized in a form such that the predicted V_{J/Psi N}(r) at large distances has the same Yukawa potential form extracted from a Lattice QCD(LQCD) calculation of Ref.[18]. The parameters of v_{cN} are determined by fitting the total cross section data of JLab by performing calculations that include J/Psi-N final state interactions(FSI). The resulting differential cross sections are found in good agreements with the data. It is shown that the FSI effects dominate the cross section in the very near threshold region, allowing for sensitive testing of the predicted J/Psi-N scattering amplitudes. By imposing the constraints of J/Psi-N potential extracted from the LQCD calculation, we have obtained three J/Psi-N potentials which fit the JLab data equally well. The resulting J/Psi-N scattering lengths are in the range of a=(-0.05 fm sim -0.25 fm). With the determined v_{cN}(r) and the wavefunctions generated from the same CQM, the constructed model is used to predict the cross sections of photo-production of eta_c(1S) and Psi(2S) mesons for future experimental tests.

The sensitivity to anomalous quartic gauge couplings (AQGCs) of the γγγZ interaction is studied in the μ^+μ^- rightarrow μ^+γγμ^- scattering at a future muon collider with unpolarized beams. The anomalous γγγZ vertex is described by two couplings, ζ_1 and ζ_2. The differential and total cross sections are calculated for the center-of-mass energies of 3 TeV, 14 TeV, and 100 TeV. For these values of the collision energy the 95% C.L. exclusion regions for AQGCs are obtained depending on the systematic error. In particular, for the 14 TeV muon collider with the integrated luminosity L = 20 ab^{-1} the best sensitivities are derived to be ζ_1 = 3.1 times 10^{-5} TeV^{-4} and ζ_2 = 6.5 times 10^{-5} TeV^{-4}. These constraints are three orders of magnitude stronger than the bounds obtained for the 27 TeV HE-LHC with L = 15 ab^{-1}. At the 100 TeV muon collider with L = 1000 ab^{-1} AQGCs can be probed up to (1.64 ÷3.4) times 10^{-8} TeV^{-4}. The partial-wave unitarity constraints on couplings ζ_1, ζ_2 are evaluated. It is shown that the unitarity is not violated in the region of the AQGCs examined in the present paper.

Aromaticity is a common chemical functionalities in bioactive molecules. In interstellar and circumstellar environments benzene and other small aromatics are considered the precursor for more complex prebiotic molecules and they have shown to potentially have rich ice-phase photochemistry. The availability of small organic molecules in prebiotic networks depends on their photostability in astrophysical environments preceding planet formation, particularly during the protoplanetary disk stage, as the disk composition is linked to the chemical make-up of planets and planetesimals. We study the ultraviolet (UV) photodestruction (120-160 nm) of five aromatic molecules in undiluted ices and, for selected cases, in astrophysically relevant ice matrices (H2O, CO, CO2). For each ice, we measure the destruction cross sections as a function of photon exposure. In undiluted ices, aromatic molecules exhibit substantially lower photodestruction cross sections (sigma < 10-19 cm2) than aliphatic hydrocarbons, including cyclohexane, (sigma = 2.8-4x10-18 cm2). Furthermore, neither substituent nature nor size affects the aromatic stability in pure ices, suggesting that the strong intermolecular interactions among aromatic molecules provide protection against VUV exposure, even with small to mid-sized ring substituents. In mixed ices, the photodestruction and reactivity of aromatic molecules (sigma = 2.5-6.1x10-18 cm2) increases by more than an order of magnitude, but are still lower than in the gas-phase. We attribute this to a weaker cage effect and matrix-specific interactions. We use the experimental photodestruction cross sections to estimate the lifetime of aromatic molecules in protoplanetary disks, denileating the disks regions in which aromatic photochemistry is expected to be the most active.

Computer-Aided Design (CAD) plays a foundational role in modern manufacturing and product development, often requiring designers to modify or build upon existing models. Converting 3D scans into parametric CAD representations--a process known as CAD reverse engineering--remains a significant challenge due to the high precision and structural complexity of CAD models. Existing deep learning-based approaches typically fall into two categories: bottom-up, geometry-driven methods, which often fail to produce fully parametric outputs, and top-down strategies, which tend to overlook fine-grained geometric details. Moreover, current methods neglect an essential aspect of CAD modeling: sketch-level constraints. In this work, we introduce a novel approach to CAD reverse engineering inspired by how human designers manually perform the task. Our method leverages multi-plane cross-sections to extract 2D patterns and capture fine parametric details more effectively. It enables the reconstruction of detailed and editable CAD models, outperforming state-of-the-art methods and, for the first time, incorporating sketch constraints directly into the reconstruction process.

We compute the cross section for the inclusive photoproduction of a pair of jets at next-to-leading order accuracy in the Color Glass Condensate (CGC) effective theory. The aim is to study the back-to-back limit, to investigate whether transverse momentum dependent (TMD) factorization can be recovered at this order. In particular, we focus on the large Sudakov double logarithms, which are major ingredients of the TMD evolution. Interestingly, the kinematical improvement of the low-x resummation scheme turns out to be a key ingredient in the analysis.

We develop a learning-based framework for constructing shrinking disturbance-invariant tubes under state- and input-dependent uncertainty, intended as a building block for tube Model Predictive Control (MPC), and certify safety via a lifted, isotone (order-preserving) fixed-point map. Gaussian Process (GP) posteriors become (1-α) credible ellipsoids, then polytopic outer sets for deterministic set operations. A two-time-scale scheme separates learning epochs, where these polytopes are frozen, from an inner, outside-in iteration that converges to a compact fixed point Z^star!subseteq!mathcal G; its state projection is RPI for the plant. As data accumulate, disturbance polytopes tighten, and the associated tubes nest monotonically, resolving the circular dependence between the set to be verified and the disturbance model while preserving hard constraints. A double-integrator study illustrates shrinking tube cross-sections in data-rich regions while maintaining invariance.

We present the new parton distribution functions (PDFs) from the CTEQ-TEA collaboration, obtained using a wide variety of high-precision Large Hadron Collider (LHC) data, in addition to the combined HERA I+II deep-inelastic scattering data set, along with the data sets present in the CT14 global QCD analysis. New LHC measurements in single-inclusive jet production with the full rapidity coverage, as well as production of Drell-Yan pairs, top-quark pairs, and high-p_T Z bosons, are included to achieve the greatest sensitivity to the PDFs. The parton distributions are determined at NLO and NNLO, with each of these PDFs accompanied by error sets determined using the Hessian method. Fast PDF survey techniques, based on the Hessian representation and the Lagrange Multiplier method, are used to quantify the preference of each data set to quantities such as α_s(m_Z), and the gluon and strange quark distributions. We designate the main resulting PDF set as CT18. The ATLAS 7 TeV precision W/Z data are not included in CT18, due to their tension with other data sets in the global fit. Alternate PDF sets are generated including the ATLAS precision 7 TeV W/Z data (CT18A), a new scale choice for low-x DIS data (CT18X), or all of the above with a slightly higher choice for the charm mass (CT18Z). Theoretical calculations of standard candle cross sections at the LHC (such as the gg fusion Higgs boson cross section) are presented.

Single cell analysis of human skeletal muscle (SM) tissue cross-sections is a fundamental tool for understanding many neuromuscular disorders. For this analysis to be reliable and reproducible, identification of individual fibres within microscopy images (segmentation) of SM tissue should be automatic and precise. Biomedical scientists in this field currently rely on custom tools and general machine learning (ML) models, both followed by labour intensive and subjective manual interventions to fine-tune segmentation. We believe that fully automated, precise, reproducible segmentation is possible by training ML models. However, in this important biomedical domain, there are currently no good quality, publicly available annotated imaging datasets available for ML model training. In this paper we release NCL-SM: a high quality bioimaging dataset of 46 human SM tissue cross-sections from both healthy control subjects and from patients with genetically diagnosed muscle pathology. These images include > 50k manually segmented muscle fibres (myofibres). In addition we also curated high quality myofibre segmentations, annotating reasons for rejecting low quality myofibres and low quality regions in SM tissue images, making these annotations completely ready for downstream analysis. This, we believe, will pave the way for development of a fully automatic pipeline that identifies individual myofibres within images of tissue sections and, in particular, also classifies individual myofibres that are fit for further analysis.

We propose two medium-baseline, kiloton-scale neutrino experiments to study neutrinos from LHC proton-proton collisions: SINE, a surface-based scintillator panel detector observing muon neutrinos from the CMS interaction point, and UNDINE, a water Cherenkov detector submerged in lake Geneva observing all-flavor neutrinos from LHCb. Using a Monte Carlo simulation, we estimate millions of neutrino interactions during the high-luminosity LHC era. We show that these datasets can constrain neutrino cross sections, charm production in pp collisions, and strangeness enhancement as a solution to the cosmic-ray muon puzzle. SINE and UNDINE thus offer a cost-effective medium-baseline complement to the proposed short-baseline forward physics facility.

While attaining external field control of bimolecular chemical reactions has long been a coveted goal of physics and chemistry, the role of hyperfine interactions and dc magnetic fields in achieving such control has remained elusive. We develop an extended coupled-channel statistical theory of barrierless atom-diatom chemical reactions, and apply it to elucidate the effects of magnetic fields and hyperfine interactions on the ultracold chemical reaction Li(^2S_{1/2}) + CaH(^2Σ^+) to LiH(^1Σ^+) + Ca(^1S_{0}) on a newly developed set of ab initio potential energy surfaces. We observe large field effects on the reaction cross sections, opening up the possibility of controlling ultracold barrierless chemical reactions by tuning selected hyperfine states of the reactants with an external magnetic field.

Subnational studies of aid effectiveness often rely on repeated cross-sections or nighttime lights, making it difficult to separate local treatment effects from baseline differences and potentially favoring infrastructure-heavy projects. We address these limitations by studying World Bank and Chinese development projects in Africa with a balanced panel of 2,166 DHS clusters across 35 countries from 2002 to 2013. Geocoded AidData projects are linked to satellite-imputed International Wealth Index estimates, a household-centered measure of material living standards. We compare a conventional two-way fixed effects (TWFE) event-study with the switcher--stayer estimator of de Chaisemartin and D'Haultfoeuille (dCdH), which avoids contaminated comparisons under staggered treatment timing. Pre-treatment diagnostics show that project placement is frequently selective: clusters that later receive projects often begin from weaker relative positions before treatment onset. Consequently, TWFE often implies larger post-treatment gains than the preferred staggered-treatment design supports. Under dCdH, the evidence becomes more selective and sector-specific. For the World Bank, positive evidence is strongest in Health, while Education shows positive but less cleanly identified gains. For China, Water Supply and Sanitation and Other Social Infrastructure and Services show positive associations with local wealth, although residual selection concerns remain. By contrast, Chinese Energy Generation and Supply appears strongly positive under TWFE but falls close to zero under dCdH. Overall, the results do not support a donor-wide claim that either the World Bank or China uniformly improves local wealth. Instead, estimated effects are concentrated in a limited set of donor--sector panels and depend strongly on how treatment timing, selection, and outcome measurement are handled.

Beauty-hadron production in proton-nucleus collisions is a particularly powerful probe of cold nuclear matter (CNM) effects: thanks to the large beauty-quark mass, the production is initiated in early hard scatterings and is calculable in perturbative QCD, while the modifications observed in nuclear collisions directly constrain the nuclear parton distribution functions (nPDFs) in a kinematic region complementary to that accessed by charm. Precisely quantifying these effects is a prerequisite for isolating possible signatures of quark-gluon plasma formation in heavy-ion collisions. In this work, the production of open beauty hadrons in p-Pb collisions at s_{mathrm{NN}} = 5.02 and 8.16~TeV is studied via a data-driven Bayesian unfolding of ALICE and LHCb measurements of non-prompt D^{0} and J/ψ mesons. The unfolded p_{T}- and y-differential cross sections are mutually consistent across decay channels and compatible with directly reconstructed beauty-hadron measurements. The nuclear modification factor R_{pPb} is reported as a function of transverse momentum and rapidity, providing the first unfolding-based result spanning -4.0 < y < 4.0 of beauty-hadron R_{pPb} covering the full rapidity range, with a precision comparable to or better than that of existing data. The results are compared with calculations based on nPDFs and can provide valuable constraints for future global nPDF fits. The total inclusive B hadron production cross section in p-Pb collisions is also reported. A weaker CNM suppression is observed for beauty hadrons than for charm hadrons, consistent with the expected mass hierarchy of cold-nuclear-matter effects.

Insufficient overlap between the melt pools produced during Laser Powder Bed Fusion (L-PBF) can lead to lack-of-fusion defects and deteriorated mechanical and fatigue performance. In-situ monitoring of the melt pool subsurface morphology requires specialized equipment that may not be readily accessible or scalable. Therefore, we introduce a machine learning framework to correlate in-situ two-color thermal images observed via high-speed color imaging to the two-dimensional profile of the melt pool cross-section. Specifically, we employ a hybrid CNN-Transformer architecture to establish a correlation between single bead off-axis thermal image sequences and melt pool cross-section contours measured via optical microscopy. In this architecture, a ResNet model embeds the spatial information contained within the thermal images to a latent vector, while a Transformer model correlates the sequence of embedded vectors to extract temporal information. Our framework is able to model the curvature of the subsurface melt pool structure, with improved performance in high energy density regimes compared to analytical melt pool models. The performance of this model is evaluated through dimensional and geometric comparisons to the corresponding experimental melt pool observations.

In quality control, microstructures are investigated rigorously to ensure structural integrity, exclude the presence of critical volume defects, and validate the formation of the target microstructure. For quenched, hierarchically-structured steels, the morphology of the bainitic and martensitic microstructures are of major concern to guarantee the reliability of the material under service conditions. Therefore, industries conduct small sample-size inspections of materials cross-sections through metallographers to validate the needle morphology of such microstructures. We demonstrate round-robin test results revealing that this visual grading is afflicted by pronounced subjectivity despite the thorough training of personnel. Instead, we propose a deep learning image classification approach that distinguishes steels based on their microstructure type and classifies their needle length alluding to the ISO 643 grain size assessment standard. This classification approach facilitates the reliable, objective, and automated classification of hierarchically structured steels. Specifically, an accuracy of 96% and roughly 91% is attained for the distinction of martensite/bainite subtypes and needle length, respectively. This is achieved on an image dataset that contains significant variance and labeling noise as it is acquired over more than ten years from multiple plants, alloys, etchant applications, and light optical microscopes by many metallographers (raters). Interpretability analysis gives insights into the decision-making of these models and allows for estimating their generalization capability.

Short-pulse, ultra high-intensity lasers have opened new regimes for studying fusion plasmas and creating novel ultra-short ion beams and neutron sources. Diagnosing the plasma in these experiments is important for optimizing the fusion yield but difficult due to the picosecond time scales, 10s of micron-cubed volumes and high densities. We propose to use the yields of photons and neutrons produced by parallel reactions involving the same reactants to diagnose the plasma conditions and predict the yields of specific reactions of interest. In this work, we focus on verifying the yield of the high-interest aneutronic proton-boron fusion reaction ^{11}{B}(p,2α){}^4{He}, which is difficult to measure directly due to the short stopping range of the produced αs in most materials. We identify promising photon-producing reactions for this purpose and compute the ratios of the photon yield to the α yield as a function of plasma parameters. In beam fusion experiments, the {}^{11}{C} yield is an easily-measurable observable to verify the α yield. In light of our results, improving and extending measurements of the cross sections for these parallel reactions are important steps to gaining greater control over these laser-driven fusion plasmas.

Predicting real-world events from live market signals demands systems that fuse qualitative news with quantitative order-book dynamics under strict temporal discipline -- a challenge existing benchmarks fail to capture. We present PolyBench, a multimodal benchmark derived from Polymarket that records point-in-time cross-sections of 38,666 binary prediction markets spanning 4,997 events, synchronously coupling each snapshot with a Central Limit Order Book (CLOB) state and a real-time news stream. Using PolyBench, we evaluate seven state-of-the-art Large Language Models -- spanning open- and closed-source families -- generating 36,165 predictions under identical, timestamp-locked market states collected between February 6 and 12, 2026. Our multidimensional framework assesses directional accuracy, our proposed Confidence-Weighted Return (CWR), Annualized Percentage Yield (APY), and Sharpe ratio via realistic order-book execution simulation. The results reveal a pronounced performance divergence: only two of seven models achieve positive financial returns -- MiMo-V2-Flash at 17.6% CWR and Gemini-3-Flash at 6.2% CWR -- while the remaining five incur losses despite uniformly high stated confidence. These findings highlight the gap between surface-level language fluency and genuine probabilistic reasoning under live market uncertainty, and establish PolyBench as a contamination-proof, financially-grounded evaluation standard for future LLM research. Our dataset and code available at \href{https://github.com/PolyBench/PolyBench{https://github.com/PolyBench/PolyBench}}.

Social simulation offers the social sciences an experimental instrument that the real world cannot supply, and generative agents have transformed it by acting as silicon samples that unite agent-based modeling with real behavioral data. Existing platforms verify collective behavior, align simulated populations with real societies in cross-sections, and employ autonomous agents for the research process. However, two social science requirements remain without systematic support: intervention in the content of a simulation and the researcher's control over the process that produces it. We present SocioVerse2, which extends SocioVerse 1.0 into a human-AI co-evolutionary paradigm built from two loops and one infrastructure. The longitudinal simulation loop simulates the target population with evolving environments and forks counterfactual branches via interventions. The controllable research loop takes the study itself as an editable state and updates state versions via controllable editing. The social science agentic infrastructure carries both loops through composable skills with researcher checkpoints, a population service over five persona pools, and an environment service over 21 real-world signal sources with point-in-time guarantees. We validate SocioVerse2 across three case families and seven case studies, from reproducing canonical agent-based models to modeling policy processes on real records and nowcasting macro-economic indices beyond the response model's knowledge cutoff. With the human-AI co-evolutionary paradigm, these cases go beyond system demonstrations to become substantive studies that investigate frontier questions in their respective disciplines. Code, data services, and a workbench are released as open-source resources.

Astrophysical uncertainties in dark matter direct detection experiments are typically addressed by parametrizing the velocity distribution in terms of a few uncertain parameters that vary around some central values. Here we propose a method to optimize over all velocity distributions lying within a given distance measure from a central distribution. We discretize the dark matter velocity distribution as a superposition of streams, and use a variety of information divergences to parametrize its uncertainties. With this, we bracket the limits on the dark matter-nucleon and dark matter-electron scattering cross sections, when the true dark matter velocity distribution deviates from the commonly assumed Maxwell-Boltzmann form. The methodology pursued is general and could be applied to other physics scenarios where a given physical observable depends on a function that is uncertain.

Using two benchmark models containing extended scalar sectors beyond the Standard Model, we study deep learning techniques to enhance the sensitivity of resonant triple Higgs boson searches in the fully hadronic 6b channel, which suffers from the combinatorial challenge of reconstructing the Higgs bosons correctly from the multiple b-jets. More specifically, we employ the framework of Symmetry Preserving Attention Network (Spa-Net), which takes into account the permutational symmetry when a correct pairing of b-jets is achieved, to tackle both jet pairing and event classification. Significantly improved efficiency is achieved in signal and background discrimination. When comparing with the conventional Dense Neural Networks, Spa-Net results in up to 40\% more stringent limits on resonant production cross-sections. These results highlight the potential of using advanced machine learning techniques to significantly improve the sensitivity of triple Higgs boson searches in the fully hadronic channel.

In quantum mechanics the modulus square of the wave function is the probability of an event --- positivity is self-evident. Quantum field theory corresponds to quantum mechanics one-to-one: the wave function corresponds to the matrix element, so the probability of a process should be the modulus square of the matrix element, positive by construction. In the founding era of perturbative quantum field theory, however, Feynman, Schwinger and Tomonaga treated inclusive processes in quantum electrodynamics, where the truncation of the squared amplitude was forced by infrared cancellations and rendered harmless by the small coupling αsimeq1/137. Carried over to exclusive processes in quantum chromodynamics, where the coupling is large, this practice produced negative decay and production rates already at NLO, persisting at NNLO. We point out that for exclusive processes, whose initial and final states are colorless for QCD and electrically neutral for QED, the infrared divergences cancel amplitude by amplitude and the KLN constraint is absent, so the complete modulus square of the truncated amplitude is the proper, manifestly positive definition of the probability. We formulate amplitude-level NRQCD factorization as the systematic prescription that restores positivity, show that every amplitude-level truncated observable admits the effective representation Γ^{amp}=Γ_{LO}bigl|1+α_sπ(c_1+ic_2)+α_s^2{π^2}(c_3+ic_4)bigr|^2, and demonstrate, with the complete NNLO QCD corrections to J/ψto3γ, Υto3γ, e^+e^-to J/ψ+J/ψ and the eight exclusive charmonium production channels at B factories, that the prescription yields positive and better-converging predictions.

There are six orientable, compact, flat 3-manifolds that can occur as cusp cross-sections of hyperbolic 4-manifolds. This paper provides criteria for exactly when a given commensurability class of arithmetic hyperbolic 4-manifolds contains a representative with a given cusp type. In particular, for three of the six cusp types, we provide infinitely many examples of commensurability classes that contain no manifolds with cusps of the given type; no such examples were previously known for any cusp type.

The production of a top-quark pair, the heaviest known elementary particle, in association with a light jet is a key process for studying the properties of the Standard Model of Particle Physics. Due to its significance as a signal process with considerable sensitivity to the top-quark mass and as a background process for new physics searches, it is crucial to predict differential cross sections with high precision. In this article, we present, for the first time, predictions for various kinematical observables at next-to-next-to-leading order in Quantum Chromodynamics. The perturbative behavior is analyzed, and uncertainties arising from missing higher-order contributions are substantially reduced. The necessary two-loop amplitudes have been evaluated in the leading-color approximation, and we provide estimates for the impact of the missing contributions.

The discovery of next-generation photoinitiators for two-photon polymerization (TPP) is hindered by the absence of large, open datasets containing the quantum-chemical and photophysical properties required to model photodissociation and excited-state behavior. Existing molecular datasets typically provide only basic physicochemical descriptors and therefore cannot support data-driven screening or AI-assisted design of photoinitiators. To address this gap, we introduce QuantumChem-200K, a large-scale dataset of over 200,000 organic molecules annotated with eleven quantum-chemical properties, including two-photon absorption (TPA) cross sections, TPA spectral ranges, singlet-triplet intersystem crossing (ISC) energies, toxicity and synthetic accessibility scores, hydrophilicity, solubility, boiling point, molecular weight, and aromaticity. These values are computed using a hybrid workflow that integrates density function theory (DFT), semi-empirical excited-state methods, atomistic quantum solvers, and neural-network predictors. Using QuantumChem-200K, we fine tune the open-source Qwen2.5-32B large language model to create a chemistry AI assistant capable of forward property prediction from SMILES. Benchmarking on 3000 unseen molecules from VQM24 and ZINC20 demonstrates that domain-specific fine-tuning significantly improves accuracy over GPT-4o, Llama-3.1-70B, and the base Qwen2.5-32B model, particularly for TPA and ISC predictions central to photoinitiator design. QuantumChem-200K and the corresponding AI assistant together provide the first scalable platform for high-throughput, LLM-driven photoinitiator screening and accelerated discovery of photosensitive materials.

Current challenges in developing foundational models for volumetric imaging data, such as magnetic resonance imaging (MRI), stem from the computational complexity of training state-of-the-art architectures in high dimensions and curating sufficiently large datasets of volumes. To address these challenges, we introduce Raptor (Random Planar Tensor Reduction), a train-free method for generating semantically rich embeddings for volumetric data. Raptor leverages a frozen 2D foundation model, pretrained on natural images, to extract visual tokens from individual cross-sections of medical volumes. These tokens are then spatially compressed using random projections, significantly reducing computational complexity while retaining semantic information. Extensive experiments on ten diverse medical volume tasks verify the superior performance of Raptor over state-of-the-art methods, including those pretrained exclusively on medical volumes (+3% SuPreM, +6% MISFM, +10% Merlin, +13% VoCo, and +14% SLIViT), while entirely bypassing the need for costly training. Our results highlight the effectiveness and versatility of Raptor as a foundation for advancing deep learning-based methods for medical volumes.

The ENDF-6 format, widely used worldwide for storing and disseminating nuclear data, is managed by the Cross Sections Evaluation Working Group (CSEWG) and fully documented in the ENDF-6 formats manual. This manual employs a combination of formal and natural language, introducing the possibility of ambiguity in certain parts of the format specification. To eliminate the possibility of ambiguity, this contribution proposes a generalization of the formal language used in the ENDF-6 formats manual, which is precisely defined in extended Backus-Naur form (EBNF). This formalization also offers several other advantages, notably reducing the complexity of creating and updating parsing and validation programs for ENDF-6 formatted files. Moreover, the availability of a formal description enables the automatic mapping of the low-level ENDF-6 representation, provided by a sequence of numbers, to a more human-friendly hierarchical representation with variable names. Demonstrating these advantages, almost the entire ENDF-6 format description has been translated into the proposed formal language, accompanied by a reference implementation of a parser/translator. This implementation leverages the formal format specification to enable reading, writing, and validating ENDF-6 formatted files.

We search for dark matter (DM) annihilating subhalos of the Milky Way halo among the Fermi Large Area Telescope (LAT) unassociated sources. We construct, for the first time, a statistical model of the unassociated sources at latitudes above 10 degrees. The latter is built as a combination of both DM annihilation subhalos as well as Galactic and extragalactic astrophysical components. The astrophysical components are constructed based on distributions of associated sources, while the distribution of DM subhalos is derived from Monte Carlo simulations. In this model we take into account the differences in the distributions of associated and unassociated sources including both covariate and prior probability shifts (both being forms of ``dataset shifts''). Previous searches of DM subhalos were based on classify-and-count strategies, while the approach adopted in this work is based on quantification learning, which allows one to determine a well-defined statistical interpretation of the contribution of a population of DM subhalos to the unassociated Fermi-LAT sources. In the bb annihilation channel and for a range of DM masses from 10 GeV to 1 TeV, we don't find a significant contribution from DM subhalos and derive a statistical 95% confidence upper limit on the DM annihilation cross section in this channel. While the derived limits are consistent with previous classify-and-count approaches, our generative statistical model opens new avenues for population studies of Fermi-LAT sources and, more generally, for searches of anomalies on top of backgrounds in presence of statistical and systematic uncertainties.

OptiWing3D is the first publicly available dataset of high-fidelity shape optimized 3D wing geometries. Existing aerodynamics datasets are either limited to 2D simulations, lack optimization, or derive diversity solely from perturbations to a single baseline design, constraining their application as benchmarks to inverse design approaches and in the study of design diversity. The OptiWing3D dataset addresses these gaps, consisting of 1552 simulations resulting in 776 wing designs initialized from distinct extruded airfoil cross-sections. Additionally, a majority of the optimized wings in the dataset are paired to 2D counterparts optimized under identical conditions, creating the first multi-fidelity aerodynamic shape optimization dataset. Moreover, this structure allows for a direct comparison between 2D and 3D aerodynamic simulations. It is observed that 3D optimized designs diverge most prominently from the 2D-optimized designs near the wingtip, where three-dimensional effects are strongest, a finding made possible by the paired nature of the dataset. Finally, we demonstrate a constraint-aware conditional latent diffusion model capable of generating optimized wings from flow conditions, establishing a baseline for future inverse design approaches. The dataset, containing wing geometries and surface pressure distributions is publicly released to advance research in data-driven aerodynamic design.

Traversing sparse 3D structures requires humanoid robots to perceive thin, overhanging geometry while executing agile, accurate whole-body motions. We study this problem through monkey-bar traversal, where the robot must jump to the structure, traverse it through sparse bar interactions, and land safely. For this task, we present a reinforcement-learning-based perceptive control system that operates directly on observations from a head-mounted solid-state lidar. To extract task-relevant geometry from the sparse returns, the policy consumes the raw lidar scan through an attention-based encoder with recurrent memory. This policy is obtained by a phase-scheduled teacher- student pipeline that combines privileged experts for jumping up, brachiating, and jumping down. For transfer to hardware, we model lidar noise, battery-voltage sag, and actuator thermal limits, and equip the humanoid with passive hook end-effectors for robust bar interaction. On hardware, the resulting policy completes the full jump-up->brachiation->jump-down sequence in 14 of 15 trials across three bar configurations and reaches brachiation speeds up to 0.5 m/s. Beyond brachiation, the same perception backbone supports a separately trained policy that ducks beneath thin overhead obstacles with 2 cm cross-sections.

The forthcoming era of massive drone delivery deployment in urban environments raises a need to develop reliable control and monitoring systems. While active solutions, i.e., wireless sharing of a real-time location between air traffic participants and control units, are of use, developing additional security layers is appealing. Among various surveillance systems, radars offer distinct advantages by operating effectively in harsh weather conditions and providing high-resolution reliable detection over extended ranges. However, contrary to traditional airborne targets, small drones and copters pose a significant problem for radar systems due to their relatively small radar cross-sections. Here, we propose an efficient approach to label drones by attaching passive resonant scatterers to their rotor blades. While blades themselves generate micro-Doppler rotor-specific signatures, those are typically hard to capture at large distances owing to small signal-to-noise ratios in radar echoes. Furthermore, drones from the same vendor are indistinguishable by their micro-Doppler signatures. Here we demonstrate that equipping the blades with multiple resonant scatterers not only extends the drone detection range but also assigns it a unique micro-Doppler encoded identifier. By extrapolating the results of our laboratory and outdoor experiments to real high-grade radar surveillance systems, we estimate that the clear-sky identification range for a small drone is approximately 3-5 kilometers, whereas it would be barely detectable at 1000 meters if not labeled. This performance places the proposed passive system on par with its active counterparts, offering the clear benefits of reliability and resistance to jamming.

Most of the world's offshore wind resource lies in waters too deep for fixed-bottom foundations, making floating offshore wind turbines (FOWTs) essential for deep-water deployment. As the industry scales toward 22 MW class designs, tower fatigue becomes increasingly critical because larger structures amplify the coupled aero-hydro-servo-elastic loads induced by continuous wind and wave excitation. Accurate fatigue-damage prediction is therefore central to certification, design optimization, and cost reduction. Yet the field lacks a shared surrogate benchmark: studies report different simulations, splits, and metrics, making methods difficult to compare. We present FLOATBench, a public tabular benchmark with 582{,}120 per-section fatigue-damage labels across three 22 MW FOWT tower geometries, derived from 19{,}404 high-fidelity OpenFAST simulations across the three towers (6{,}468 per tower: 1{,}078 aligned wind/wave operating points times six turbulence seeds), labeled at 30 cross-sections per tower. FLOATBench includes a regime-aware alpha-shape partition of the joint wind/wave operating envelope, stratifying test points into in-train, interpolation, and extrapolation regimes. It is paired with a reproducible evaluation harness covering three protocol levels: random validation (E1), within-tower regime-aware evaluation (E2), and cross-tower transfer (E3). The regime-aware protocol reveals rank shifts between global and extrapolation performance that random-split leaderboards cannot detect. To the authors' knowledge, FLOATBench is the first FOWT fatigue benchmark for tabular surrogate modeling, and offers an evaluation protocol that generalizes to engineering surrogates defined over physical operating envelopes. Dataset and code available at: https://github.com/Joao97ribeiro/FLOATBench.

Objective: Using natural language processing (NLP) to find sentences that state treatment plans in a clinical note, would automate plan extraction and would further enable their use in tools that help providers and care managers. However, as in the most NLP tasks on clinical text, creating gold standard to train and test NLP models is tedious and expensive. Fortuitously, sometimes but not always clinical notes contain sections with a heading that identifies the section as a plan. Leveraging contents of such labeled sections as a noisy training data, we assessed accuracy of NLP models trained with the data. Methods: We used common variations of plan headings and rule-based heuristics to find plan sections with headings in clinical notes, and we extracted sentences from them and formed a noisy training data of plan sentences. We trained Support Vector Machine (SVM) and Convolutional Neural Network (CNN) models with the data. We measured accuracy of the trained models on the noisy dataset using ten-fold cross validation and separately on a set-aside manually annotated dataset. Results: About 13% of 117,730 clinical notes contained treatment plans sections with recognizable headings in the 1001 longitudinal patient records that were obtained from Cleveland Clinic under an IRB approval. We were able to extract and create a noisy training data of 13,492 plan sentences from the clinical notes. CNN achieved best F measures, 0.91 and 0.97 in the cross-validation and set-aside evaluation experiments respectively. SVM slightly underperformed with F measures of 0.89 and 0.96 in the same experiments. Conclusion: Our study showed that the training supervised learning models using noisy plan sentences was effective in identifying them in all clinical notes. More broadly, sections with informal headings in clinical notes can be a good source for generating effective training data.

The total charm-quark production cross section per unit of rapidity dσ({rm cc})/dy, and the fragmentation fractions of charm quarks to different charm-hadron species f(crm h_{c}), are measured for the first time in p-Pb collisions at s_mathrm{NN} = 5.02 TeV at midrapidity (-0.96<y<0.04 in the centre-of-mass frame) using data collected by ALICE at the CERN LHC. The results are obtained based on all the available measurements of prompt production of ground-state charm-hadron species: D^{0}, D^{+}, D_s^{+}, and J/ψ mesons, and Λ_c^{+} and Ξ_{rm c}^{0} baryons. The resulting cross section is dσ({rm cc})/dy =219.6 pm 6.3;(stat.) {;}_{-11.8}^{+10.5};(syst.) {;}_{-2.9}^{+8.3};(extr.)pm 5.4;(BR)pm 4.6;(lumi.) pm 19.5;(rapidity shape)+15.0;(Ω_{rm c}^{0}) mb, which is consistent with a binary scaling of pQCD calculations from pp collisions. The measured fragmentation fractions are compatible with those measured in pp collisions at s = 5.02 and 13 TeV, showing an increase in the relative production rates of charm baryons with respect to charm mesons in pp and p-Pb collisions compared with e^{+e^{-}} and e^{-p} collisions. The p_T-integrated nuclear modification factor of charm quarks, R_pPb({rm cc})= 0.91 pm 0.04;{rm (stat.)}{}^{+0.08}_{-0.09};{rm (syst.)}{}^{+0.05}_{-0.03};{rm (extr.)}{}pm 0.03;{rm (lumi.)}, is found to be consistent with unity and with theoretical predictions including nuclear modifications of the parton distribution functions.

Rolling-window factor pipelines for Chinese A-share markets contain a subtle but costly flaw: daily price-move limits (+/-10% main-board, +/-20% STAR/ChiNext) render a fraction of closing prices non-executable, yet standard implementations ingest these values before any row-filtering runs. The contaminated aggregates propagate silently through moving averages, correlations, and ranks--a failure mode we term "upstream contamination". On real A-share data it inflates apparent information coefficient by 18% while reducing realised Sharpe by 0.44 points, because the model learns to predict returns it cannot trade. We resolve this with a mask-first design: a Boolean tradability mask is constructed at data load time and threaded through every operator, so that no window ever reads a non-tradable price. Built on this foundation, the system adds (i) a GPU-vectorised 213-factor engine via PyTorch unfold primitives (51x over pandas); (ii) an Adjusted-MSE loss penalising wrong-sign predictions 11x more heavily than magnitude errors; (iii) block-bootstrap GBM augmentation; and (iv) Markowitz-Ledoit-Wolf portfolio optimisation with cvxpy warm-start caching. On a calibrated 3,000-stock synthetic panel the system achieves annualised Sharpe 2.05; on proprietary real A-share data (2022-2024) it achieves Sharpe 1.63. Ablation shows the mask contract is the single largest contributor (+0.44), exceeding any model or loss choice. The full implementation is released under MIT licence at https://github.com/initial-d/ml-quant-trading.

Data-driven radio frequency (RF) tomography has demonstrated significant potential for underground target detection, due to the penetrative nature of RF signals through soil. However, it is still challenging to achieve accurate and robust performance in dynamic environments. In this work, we propose a data-driven radio frequency tomography (DRIFT) framework with the following key components to reconstruct cross section images of underground root tubers, even with significant changes in RF signals. First, we design a cross-modal sensing system with RF and visual sensors, and propose to train an RF tomography deep neural network (DNN) model following the cross-modal learning approach. Then we propose to apply continual learning to automatically update the DNN model, once environment changes are detected in a dynamic environment. Experimental results show that our approach achieves an average equivalent diameter error of 2.29 cm, 23.2% improvement upon the state-of-the-art approach. Our DRIFT code and dataset are publicly available on https://github.com/Data-driven-RTI/DRIFT.

The increasing prevalence of lumbar spinal canal stenosis has resulted in a surge of MRI (Magnetic Resonance Imaging), leading to labor-intensive interpretation and significant inter-reader variability, even among expert radiologists. This paper introduces a novel and efficient deep-learning framework that fully automates the grading of lumbar spinal canal stenosis. We demonstrate state-of-the-art performance in grading spinal canal stenosis on a dataset of 1,975 unique studies, each containing three distinct types of 3D cross-sectional spine images: Axial T2, Sagittal T1, and Sagittal T2/STIR. Employing a distinctive training strategy, our proposed multistage approach effectively integrates sagittal and axial images. This strategy employs a multi-view model with a sequence-based architecture, optimizing feature extraction and cross-view alignment to achieve an AUROC (Area Under the Receiver Operating Characteristic Curve) of 0.971 in spinal canal stenosis grading surpassing other state-of-the-art methods.

Documentation burden is a major contributor to clinician burnout, which is rising nationally and is an urgent threat to our ability to care for patients. Artificial intelligence (AI) chatbots, such as ChatGPT, could reduce clinician burden by assisting with documentation. Although many hospitals are actively integrating such systems into electronic medical record systems, AI chatbots utility and impact on clinical decision-making have not been studied for this intended use. We are the first to examine the utility of large language models in assisting clinicians draft responses to patient questions. In our two-stage cross-sectional study, 6 oncologists responded to 100 realistic synthetic cancer patient scenarios and portal messages developed to reflect common medical situations, first manually, then with AI assistance. We find AI-assisted responses were longer, less readable, but provided acceptable drafts without edits 58% of time. AI assistance improved efficiency 77% of time, with low harm risk (82% safe). However, 7.7% unedited AI responses could severely harm. In 31% cases, physicians thought AI drafts were human-written. AI assistance led to more patient education recommendations, fewer clinical actions than manual responses. Results show promise for AI to improve clinician efficiency and patient care through assisting documentation, if used judiciously. Monitoring model outputs and human-AI interaction remains crucial for safe implementation.

This work explores how assumptions regarding the particle-physics nature of dark matter can alter the evolution of the Sagittarius (Sgr) dwarf spheroidal galaxy and its expansive stellar stream. We run a large suite of N-body simulations to model the infall of a Sgr-like dwarf, exploring how the presence of dark matter self interactions impacts its evolution. For a scattering cross section of sigma/m_chi = 30 cm^2/g (at orbital velocity scales), these interactions result in significantly less stellar mass and little to no dark matter bound to the progenitor at the present day. To isolate the cause of this mass loss, we introduce a novel technique for controlling which pairs of dark matter simulation particles can interact. This enables us to identify ram-pressure evaporation - the scattering of satellite and host dark matter particles - as the primary source of the enhanced mass loss. The rapid disintegration of the Sgr progenitor when self interactions are allowed alters some key properties of the resulting stellar stream, most dramatically suppressing the presence of a "spur" on the apocenter of the trailing stream arm that correlates with the mass of the satellite at last pericenter. We demonstrate how the effects on the Sgr system scale with the particular choice of self-interaction cross section, which affects the degree of ram-pressure evaporation. These findings generalize beyond the Sgr system, underscoring that dwarf stellar streams and dwarf galaxies with close passages may serve as sensitive probes for dark matter self interactions.

We consider identification of average treatment effects on the treated (ATT) within the difference-in-differences (DiD) framework in the presence of endogenous sample selection. First, we establish that the usual DiD estimand fails to recover meaningful treatment effects, even if selection and treatment assignment are independent. Next, we partially identify the ATT for individuals who are always observed post-treatment regardless of their treatment status, and derive bounds on this parameter under different sets of assumptions about the relationship between sample selection and treatment assignment. Extensions to the repeated cross-section and two-by-two comparisons in the staggered adoption case are explored. Furthermore, we provide identification results for the ATT of three additional empirically relevant latent groups by incorporating outcome mean dominance assumptions which have intuitive appeal in applications. Finally, two empirical illustrations demonstrate the approach's usefulness by revisiting (i) the effect of a job training program on earnings(Calonico & Smith, 2017) and (ii) the effect of a working-from-home policy on employee performance (Bloom, Liang, Roberts, & Ying, 2015).

We interpret the recent excess in a rare decay of the Higgs boson, Hto Zgamma, using a light axion-like particle (ALP) in the massrange 0.05 - 0.1 GeV.The dominant decay of such a light ALP is into a pair of collimated photons, whose decay is required to happen before reaching the ECAL detector, such that it mimics a single photon in the detector. It can explain the excess with a coupling C^{rm eff}_{aZH} / Lambda sim 4 times 10^{-5};{rm GeV}^{-1}, while the decay of the ALP before reaching the ECAL requires the diphoton coupling C^{rm eff}_{gammagamma}/ Lambda ge 0.35 ,{rm TeV}^{-1} (0.1,{rm eV}/m_a)^2. A potential test would be the rare decay of the Z boson Z to a H^* to a (b bar b) at the Tera-Z option of the future FCC and CEPC. However, it has a branching ratio of only O(10^{-12}), and thus barely testable. The production cross section for pp to Z^* to a H via the same coupling C^{rm eff}_{aZH} / Lambda at the LHC is too small for detection.

Very recently, the two-photon decay width of the η_b meson was computed with lattice QCD methods. This decay has not yet been measured. The knowledge of this width allows for the calculation of the η_b production cross section through photon-photon interactions in ultra-peripheral PbPb collisions. In this work we present this calculation, which is the first application of the lattice result. Since UPCs are gaining an increasing attention of the heavy ion community, we take the opportunity to perform a comprehensive study of the different ways of defining ultra-peripheral collisions and of the different ways to treat the equivalent photon flux.

We present a new approach to formulating and solving heterogeneous agent models with aggregate risk. We replace the cross-sectional distribution with low-dimensional prices as state variables and let agents learn equilibrium price dynamics directly from simulated paths. To do so, we introduce a structural reinforcement learning (SRL) method which treats prices via simulation while exploiting agents' structural knowledge of their own individual dynamics. Our SRL method yields a general and highly efficient global solution method for heterogeneous agent models that sidesteps the Master equation and handles problems traditional methods struggle with, in particular nontrivial market-clearing conditions. We illustrate the approach in the Krusell-Smith model, the Huggett model with aggregate shocks, and a HANK model with a forward-looking Phillips curve, all of which we solve globally within minutes.

Causal discovery for both cross-sectional and temporal data has traditionally followed a dataset-specific paradigm, where a new model is fitted for each individual dataset. Such an approach limits the potential of multi-dataset pretraining. The concept of large causal models (LCMs) envisions a class of pre-trained neural architectures specifically designed for temporal causal discovery. Prior approaches are constrained to small variable counts, degrade with larger inputs, and rely heavily on synthetic data, limiting generalization. We propose a principled framework for LCMs, combining diverse synthetic generators with realistic time-series datasets, allowing learning at scale. Extensive experiments on synthetic, semi-synthetic and realistic benchmarks show that LCMs scale effectively to higher variable counts and deeper architectures while maintaining strong performance. Trained models achieve competitive or superior accuracy compared to classical and neural baselines, particularly in out-of-distribution settings, while enabling fast, single-pass inference. Results demonstrate LCMs as a promising foundation-model paradigm for temporal causal discovery. Experiments and model weights are available at https://github.com/kougioulis/LCM-paper/.

Reliable insertion of industrial connectors remains a central challenge in robotics, requiring sub-millimeter precision under uncertainty and often without full visual access. Vision-based approaches struggle with occlusion and limited generalization, while learning-based policies frequently fail to transfer to unseen geometries. To address these limitations, we leverage tactile sensing, which captures local surface geometry at the point of contact and thus provides reliable information even under occlusion and across novel connector shapes. Building on this capability, we present Touch2Insert, a tactile-based framework for arbitrary peg insertion. Our method reconstructs cross-sectional geometry from high-resolution tactile images and estimates the relative pose of the hole with respect to the peg in a zero-shot manner. By aligning reconstructed shapes through registration, the framework enables insertion from a single contact without task-specific training. To evaluate its performance, we conducted experiments with three diverse connectors in both simulation and real-robot settings. The results indicate that Touch2Insert achieved sub-millimeter pose estimation accuracy for all connectors in simulation, and attained an average success rate of 86.7\% on the real robot, thereby confirming the robustness and generalizability of tactile sensing for real-world robotic connector insertion.

This paper will propose a novel machine learning based portfolio management method in the context of the cryptocurrency market. Previous researchers mainly focus on the prediction of the movement for specific cryptocurrency such as the bitcoin(BTC) and then trade according to the prediction. In contrast to the previous work that treats the cryptocurrencies independently, this paper manages a group of cryptocurrencies by analyzing the relative relationship. Specifically, in each time step, we utilize the neural network to predict the rank of the future return of the managed cryptocurrencies and place weights accordingly. By incorporating such cross-sectional information, the proposed methods is shown to profitable based on the backtesting experiments on the real daily cryptocurrency market data from May, 2020 to Nov, 2023. During this 3.5 years, the market experiences the full cycle of bullish, bearish and stagnant market conditions. Despite under such complex market conditions, the proposed method outperforms the existing methods and achieves a Sharpe ratio of 1.01 and annualized return of 64.26%. Additionally, the proposed method is shown to be robust to the increase of transaction fee.

We study the S-matrix and inclusive cross-section for general dressed states in quantum electrodynamics. We obtain an infrared factorization formula of the S-matrix elements for general dressed states. It enables us to study what dressed states lead to infrared-safe S-matrix elements. The condition for dressed states can be interpreted as the memory effect which is nothing but the conservation law of the asymptotic symmetry. We derive the generalized soft photon theorem for general dressed states. We also compute inclusive cross-section using general dressed states. It is necessary to use appropriate initial and final dressed states to evaluate interference effects, which cannot be computed correctly by using Fock states due to the infrared divergence.

Burnout is an occupational syndrome that, like many other professions, affects the majority of software engineers. Past research studies showed important trends, including an increasing use of machine learning techniques to allow for an early detection of burnout. This paper is a systematic literature review (SLR) of the research papers that proposed machine learning (ML) approaches, and focused on detecting burnout in software developers and IT professionals. Our objective is to review the accuracy and precision of the proposed ML techniques, and to formulate recommendations for future researchers interested to replicate or extend those studies. From our SLR we observed that a majority of primary studies focuses on detecting emotions or utilise emotional dimensions to detect or predict the presence of burnout. We also performed a cross-sectional study to detect which ML approach shows a better performance at detecting emotions; and which dataset has more potential and expressivity to capture emotions. We believe that, by identifying which ML tools and datasets show a better performance at detecting emotions, and indirectly at identifying burnout, our paper can be a valuable asset to progress in this important research direction.

Energy Dispersive X-ray (EDX) tomography in Scanning Transmission Electron Microscopy (STEM) enables 3D compositional and elemental mapping at the nanoscale, but its use is limited by restricted tilt ranges and low-dose conditions required to avoid beam damage. Limited-angle acquisition introduces missing-wedge artefacts such as elongation and anisotropic resolution, while noisy low-dose data further degrade reconstruction quality and quantitative reliability. Here, we introduce an unsupervised deep learning framework based on Deep Image Prior with total variation regularization (DIP-TV) for limited-angle STEM-EDX tomography. We extend it to a multi-channel formulation (DIPm-TV) that jointly reconstructs multiple elemental maps by exploiting spatial correlations. Using a synthetic 3-channel phantom, we show that the method compensates for severe missing-wedge artefacts corresponding to approximately 100^circ of missing angular range under moderate noise, outperforming simultaneous iterative reconstruction technique and compressed sensing approaches. We apply the method to 3D chemical analysis of Ge-Sb-Te (GST) memory devices in virgin (as-fabricated) and SET (crystalline) operational states. Samples were prepared as cross-sectional focused ion beam lamellae and acquired under a limited-angle tilt range from -40^circ to +40^circ with 5^circ steps and a dose of 2.0times10^5 e^-/Ang^2. The multi-channel approach enables voxel-by-voxel elemental reconstruction using only EDX signals without external structural priors such as high-angle annular dark-field imaging. The reconstructed volumes show near-isotropic spatial resolution and reveal compositional heterogeneities associated with device operation. This approach enables 3D chemical characterization in experimentally accessible sample geometries where conventional methods fail due to severe angular limitations.

Constitutions as the formal foundation of a country's legal and political system have important economic and political effects. Yet, we still know little about why constitutions set effective constraints on politicians in some societies, while being largely disregarded in others. Here, we ask if national culture matters for constitutional compliance. We study a cross-section of 115 countries, making use of novel indicators of constitutional compliance. We find that societies with a more individualistic population exhibit higher levels of compliance. These results are robust and extend to instrumental variables estimations. They imply a novel transmission channel from cultural traits to long-term economic development: individualistic national culture increases the credibility of constitutional self-commitments. Our analysis also supports the more general idea that the effects of formal institutions depend on the informal institutional environment in which they are embedded. Regarding religion, our results are consistent with past research that attributes the lack of development in the modern Muslim world to deficient institutional quality.

Large language models (LLMs) that produce human-like responses have begun to revolutionize research practices in the social sciences. We develop a novel methodological framework that fine-tunes LLMs with repeated cross-sectional surveys to incorporate the meaning of survey questions, individual beliefs, and temporal contexts for opinion prediction. We introduce two new emerging applications of the AI-augmented survey: retrodiction (i.e., predict year-level missing responses) and unasked opinion prediction (i.e., predict entirely missing responses). Among 3,110 binarized opinions from 68,846 Americans in the General Social Survey from 1972 to 2021, our models based on Alpaca-7b excel in retrodiction (AUC = 0.86 for personal opinion prediction, rho = 0.98 for public opinion prediction). These remarkable prediction capabilities allow us to fill in missing trends with high confidence and pinpoint when public attitudes changed, such as the rising support for same-sex marriage. On the other hand, our fine-tuned Alpaca-7b models show modest success in unasked opinion prediction (AUC = 0.73, rho = 0.67). We discuss practical constraints and ethical concerns regarding individual autonomy and privacy when using LLMs for opinion prediction. Our study demonstrates that LLMs and surveys can mutually enhance each other's capabilities: LLMs can broaden survey potential, while surveys can improve the alignment of LLMs.

This work addresses minimum-weight design of undamped Euler-Bernoulli frame structures under subresonant single-frequency harmonic excitations, focusing on (robust) dynamic compliance and (robust) peak input power with ellipsoidal load uncertainty. We develop a semidefinite reformulation of robust dynamic compliance for subresonant single-frequency excitation and prove its equivalence to robust peak input power. We show that both these response measures admit an exact reformulation as a free-vibration eigenvalue constraint with design-independent mass augmentation, unifying static, dynamic, and modal requirements. Despite the nonconvex polynomial dependence on cross-sectional areas, certified bounds on global minimizers are obtained via the moment-sum-of-squares hierarchy of semidefinite relaxations. Benchmark studies on 10- and 35-segment frames corroborate the theory. For the 10-segment problem, we obtain the global optimum; for the 35-segment frame, we find high-quality locally-optimal designs that substantially improve on the best known one. We further fabricate and experimentally validate an additional design that closely matches the predictions of the model.

Semiparametric discrete choice models are widely used in a variety of practical applications. While these models are point identified in the presence of continuous covariates, they can become partially identified when covariates are discrete. In this paper we find that classical estimators, including the maximum score estimator, (Manski (1975)), loose their attractive statistical properties without point identification. First of all, they are not sharp with the estimator converging to an outer region of the identified set, (Komarova (2013)), and in many discrete designs it weakly converges to a random set. Second, they are not robust, with their distribution limit discontinuously changing with respect to the parameters of the model. We propose a novel class of estimators based on the concept of a quantile of a random set, which we show to be both sharp and robust. We demonstrate that our approach extends from cross-sectional settings to classical static and dynamic discrete panel data models.

Detectors trained on closed-set annotations can miss rare moving objects outside the training taxonomy. Automotive radar provides category-independent Doppler motion cues and is less affected by adverse illumination and weather, but sparse, noisy returns hinder class-aware 3D box detection. Surface location and velocity remain useful for motion reasoning and collision avoidance when full box geometry is difficult to recover. We present the Physics-Aware Radar Transformer (PART), a fully sparse radar-only detector that predicts existence confidence, a representative surface point, and 2D ground-plane velocity for each moving-object hypothesis. Doppler-Aware Query Initialization (DAQI) replaces scene-independent learned queries with input-dependent proposals by clustering radar returns in position and velocity, easing query-object assignment in sparse scenes. Physics-Guided Cross-Attention (PGCA) incorporates radial-Doppler consistency and radar cross section (RCS) into query-point association. Uncertainty-aware supervision randomly masks ground-truth objects and assigns soft existence targets to ambiguous radar-supported queries, reducing reliance on exhaustive annotations. With only 1.1 million parameters, PART achieves a class-agnostic average precision (CA-AP) of 0.8827, a mean average surface translation error (mASTE) of 0.3188 m, and a mean average velocity error (mAVE) of 0.8084 m/s on nuScenes. It attains 0.9203 recall on rare and safety-relevant categories excluded from the standard evaluation and remains effective at night, in rain, and under severe occlusion. Inspection of apparent false positives shows that some predictions correspond to moving objects absent from the nuScenes annotations. Code and pretrained model weights will be publicly available at https://github.com/sunyinghao-uestc/PART.

Single-cell cancer datasets are predominantly cross-sectional and rarely provide paired or longitudinal observations linking individual healthy-like cells to tumor-associated states. We introduce CancerZigZag, a seed-initialized diffusion-based framework for exploratory generation of tumor-associated single-cell candidate clouds from unpaired epithelial cell populations. For each cancer context, a diffusion model is trained exclusively on tumor-derived epithelial cells and applied through repeated partial latent-space perturbation and reverse diffusion to held-out healthy-like seeds, generating stochastic candidate clouds without paired measurements or classifier guidance. We applied CancerZigZag to colorectal, breast, lung, and renal cell carcinoma contexts and explored parameter landscapes defined by perturbation depth and the number of ZigZag cycles. Across the reported operating configurations, candidate clouds contained outputs classified toward held-out tumor-derived reference populations for each evaluated seed. Residual seed-dependent organization varied across contexts, with the clearest structure in colorectal cancer, more modest organization in lung cancer, and limited cloud-level structure in breast and renal cell carcinoma. Representative candidates also showed directional concordance with transcriptional shifts observed between held-out healthy-like and tumor-derived reference populations. CancerZigZag is not interpreted as a model of deterministic healthy-to-tumor transformation or cellular progression. Instead, it provides a reference-informed framework for exploring tumor-associated candidate distributions from unpaired healthy-like seeds and quantifying the context-dependent relationship between tumor-associated displacement and residual seed dependence.

Machine learning-based unfolding has enabled unbinned and high-dimensional differential cross section measurements. Two main approaches have emerged in this research area: one based on discriminative models and one based on generative models. The main advantage of discriminative models is that they learn a small correction to a starting simulation while generative models scale better to regions of phase space with little data. We propose to use Schroedinger Bridges and diffusion models to create SBUnfold, an unfolding approach that combines the strengths of both discriminative and generative models. The key feature of SBUnfold is that its generative model maps one set of events into another without having to go through a known probability density as is the case for normalizing flows and standard diffusion models. We show that SBUnfold achieves excellent performance compared to state of the art methods on a synthetic Z+jets dataset.

We study the electron-positron to muon--anti-muon cross-section in the asymptotically safe Standard Model. In particular, we include the graviton contributions to the scattering amplitude, which is computed from momentum-dependent time-like one-particle-irreducible correlation functions. Specifically, we employ reconstruction techniques for the graviton spectral functions. We find that the full asymptotically safe quantum cross section decreases in the ultraviolet with the centre-of-mass energy, and is compatible with unitarity bounds. Importantly, our findings provide non-trivial evidence for the unitarity of the asymptotically safe Standard Model.

In the real world, objects reveal internal textures when sliced or cut, yet this behavior is not well-studied in 3D generation tasks today. For example, slicing a virtual 3D watermelon should reveal flesh and seeds. Given that no available dataset captures an object's full internal structure and collecting data from all slices is impractical, generative methods become the obvious approach. However, current 3D generation and inpainting methods often focus on visible appearance and overlook internal textures. To bridge this gap, we introduce FruitNinja, the first method to generate internal textures for 3D objects undergoing geometric and topological changes. Our approach produces objects via 3D Gaussian Splatting (3DGS) with both surface and interior textures synthesized, enabling real-time slicing and rendering without additional optimization. FruitNinja leverages a pre-trained diffusion model to progressively inpaint cross-sectional views and applies voxel-grid-based smoothing to achieve cohesive textures throughout the object. Our OpaqueAtom GS strategy overcomes 3DGS limitations by employing densely distributed opaque Gaussians, avoiding biases toward larger particles that destabilize training and sharp color transitions for fine-grained textures. Experimental results show that FruitNinja substantially outperforms existing approaches, showcasing unmatched visual quality in real-time rendered internal views across arbitrary geometry manipulations.

The teaching career shares common global characteristics, such as internal promotion, performance evaluation, recruitment of top candidates, continuous training, specialization, and peer learning. This study aims to describe the factors associated with the value placed on the teaching career in Peru. A total of 28217 public school teachers were analyzed using data from the 2020 National Teacher Survey. A variable measuring the "value of the teaching career" was constructed using eight indicators and categorized as low, medium, or high. Another variable, vision of the future, was classified as pessimistic, conformist, or optimistic. This observational, cross-sectional, and analytical study included variables related to in-service training, working conditions, professional recognition, and sociodemographic characteristics. Among the teachers surveyed, 45.8 % expressed an optimistic outlook on the future of the profession, 48 % held a conformist view, and only 6.2 % reported a pessimistic perspective. A generalized linear model revealed that the value placed on the teaching career was significantly associated with male gender (p = 0.002), a professional career (p < 0.001), an optimistic outlook (p = 0.033), and working at the primary level (p < 0.001). It was concluded that Peruvian teachers predominantly hold conformist or optimistic views of their profession. This highlights the need to reinforce merit-based advancement, competency-based training, intrinsic motivation, and ongoing professional development

This paper presents the observation of four-top-quark (tttt) production in proton-proton collisions at the LHC. The analysis is performed using an integrated luminosity of 140 fb^{-1} at a centre-of-mass energy of 13 TeV collected using the ATLAS detector. Events containing two leptons with the same electric charge or at least three leptons (electrons or muons) are selected. Event kinematics are used to separate signal from background through a multivariate discriminant, and dedicated control regions are used to constrain the dominant backgrounds. The observed (expected) significance of the measured tttt signal with respect to the standard model (SM) background-only hypothesis is 6.1 (4.3) standard deviations. The tttt production cross section is measured to be 22.5^{+6.6}_{-5.5} fb, consistent with the SM prediction of 12.0 pm 2.4 fb within 1.8 standard deviations. Data are also used to set limits on the three-top-quark production cross section, being an irreducible background not measured previously, and to constrain the top-Higgs Yukawa coupling and effective field theory operator coefficients that affect tttt production.

High to ultrahigh energy neutrino detectors can uniquely probe the properties of dark matter χ by searching for the secondary products produced through annihilation and/or decay processes. We evaluate the sensitivities to dark matter thermally averaged annihilation cross section langleσvrangle and partial decay width into neutrinos Γ_{χrightarrowνbarν} (in the mass scale 10^7 leq m_χ/{rm GeV} leq 10^{15}) for next generation observatories like POEMMA and GRAND. We show that in the range 10^7 leq m_χ/{rm GeV} leq 10^{11}, space-based Cherenkov detectors like POEMMA have the advantage of full-sky coverage and rapid slewing, enabling an optimized dark matter observation strategy focusing on the Galactic center. We also show that ground-based radio detectors such as GRAND can achieve high sensitivities and high duty cycles in radio quiet areas. We compare the sensitivities of next generation neutrino experiments with existing constraints from IceCube and updated 90\% C.L. upper limits on langleσvrangle and Γ_{χrightarrowνbarν} using results from the Pierre Auger Collaboration and ANITA. We show that in the range 10^7 leq m_χ/{rm GeV} leq 10^{11} POEMMA and GRAND10k will improve the neutrino sensitivity to particle dark matter by factors of 2 to 10 over existing limits, whereas GRAND200k will improve this sensitivity by two orders of magnitude. In the range 10^{11} leq m_χ/{rm GeV} leq 10^{15}, POEMMA's fluorescence observation mode will achieve an unprecedented sensitivity to dark matter properties. Finally, we highlight the importance of the uncertainties related to the dark matter distribution in the Galactic halo, using the latest fit and estimates of the Galactic parameters.

Dealing with structural breaks is an important step in most, if not all, empirical economic research. This is particularly true in panel data comprised of many cross-sectional units, such as individuals, firms or countries, which are all affected by major events. The COVID-19 pandemic has affected most sectors of the global economy, and there is by now plenty of evidence to support this. The impact on stock markets is, however, still unclear. The fact that most markets seem to have partly recovered while the pandemic is still ongoing suggests that the relationship between stock returns and COVID-19 has been subject to structural change. It is therefore important to know if a structural break has occurred and, if it has, to infer the date of the break. In the present paper we take this last observation as a source of motivation to develop a new break detection toolbox that is applicable to different sized panels, easy to implement and robust to general forms of unobserved heterogeneity. The toolbox, which is the first of its kind, includes a test for structural change, a break date estimator, and a break date confidence interval. Application to a panel covering 61 countries from January 3 to September 25, 2020, leads to the detection of a structural break that is dated to the first week of April. The effect of COVID-19 is negative before the break and zero thereafter, implying that while markets did react, the reaction was short-lived. A possible explanation for this is the quantitative easing programs announced by central banks all over the world in the second half of March.

We report on an extraction of the polarized photoproduction cross-section for the proton, deuteron, neutron and ^3He, obtained by extrapolating electron scattering data to the real photon point. The data are from the Jefferson Lab E97-110 (^3He) and CLAS EG4 (proton and deuteron) experiments. Information on the neutron is extracted from the deuteron or ^3He data using the weak binding approximation. Comparing with data obtained with real photons, we find that while the proton results agree, our results on the deuteron and the neutron exhibit a larger strength in the Δ(1232) region, and are more consistent with isospin symmetry when compared with the proton results.

We develop and analyse a conforming piecewise affine finite element method for the Grad--Mercier equation, a nonlocal elliptic model for magnetic equilibria whose source depends on the global rank of a flux function. The principal difficulty is that the unique continuum equilibrium has a maximum plateau of prescribed positive area. The solution therefore samples the rank law only above the plateau mass, while perturbations that separate equal values may distribute this mass over several numerical ranks and thereby alter the non-strict rank source. We exploit the continuum well-posedness structure to replace the rank law by an equivalent clipped, nonnegative law, and replace Lebesgue measure by a mass-lumped nodal measure. Equal nodal values are assigned a common rank interval, thereby retaining the full lumped mass of each tied level. The resulting weighted rearrangement gives a strictly convex discrete energy and hence a unique finite element equilibrium. On meshes satisfying a discrete comparison principle, the discrete equilibrium is nonnegative and bounded above by a computable barrier. A Poisson-preconditioned rearrangement iteration converges on each fixed mesh and admits computable a posteriori energy and energy-norm bounds. As polygonal finite element domains converge to the physical cross-section, the discrete equilibria converge strongly in H^1_0(Ω) and uniformly on overlineΩ to the unique Grad--Mercier equilibrium. Reconstructed equilibrium sources converge weak-* in L^{infty}(Ω) to the original nonlocal source.

Jet vetoes are central to precision measurements of Higgs-boson properties at the Large Hadron Collider, where they are used to suppress backgrounds containing hard QCD radiation. We present the first prediction for the Higgs jet-vetoed cross section at the third logarithmic order in QCD, consistently combining the next-to-next-to-next-to-leading order calculation with state-of-the-art next-to-next-to-next-to-leading logarithmic resummation. At phenomenologically relevant veto scales (p_T^{rm v}sim30 GeV) and jet radii (R=0.4), the resummation increases the fixed-order prediction by about 3%, and their combination leads to a residual perturbative uncertainty of approximately 3%. Our results mark a milestone in the precise description of jet-vetoed Higgs-production at hadron colliders, reaching the level of precision relevant for the high-luminosity phase of the LHC.

Learning the continuous dynamics of a system from snapshots of its temporal marginals is a problem which appears throughout natural sciences and machine learning, including in quantum systems, single-cell biological data, and generative modeling. In these settings, we assume access to cross-sectional samples that are uncorrelated over time, rather than full trajectories of samples. In order to better understand the systems under observation, we would like to learn a model of the underlying process that allows us to propagate samples in time and thereby simulate entire individual trajectories. In this work, we propose Action Matching, a method for learning a rich family of dynamics using only independent samples from its time evolution. We derive a tractable training objective, which does not rely on explicit assumptions about the underlying dynamics and does not require back-propagation through differential equations or optimal transport solvers. Inspired by connections with optimal transport, we derive extensions of Action Matching to learn stochastic differential equations and dynamics involving creation and destruction of probability mass. Finally, we showcase applications of Action Matching by achieving competitive performance in a diverse set of experiments from biology, physics, and generative modeling.

AI-assisted radiological interpretation is based on predominantly narrow, single-task models. This approach is impractical for covering the vast spectrum of imaging modalities, diseases, and radiological findings. Foundation models (FMs) hold the promise of broad generalization across modalities and in low-data settings. However, this potential has remained largely unrealized in radiology. We introduce Curia, a foundation model trained on the entire cross-sectional imaging output of a major hospital over several years, which to our knowledge is the largest such corpus of real-world data-encompassing 150,000 exams (130 TB). On a newly curated 19-task external validation benchmark, Curia accurately identifies organs, detects conditions like brain hemorrhages and myocardial infarctions, and predicts outcomes in tumor staging. Curia meets or surpasses the performance of radiologists and recent foundation models, and exhibits clinically significant emergent properties in cross-modality, and low-data regimes. To accelerate progress, we release our base model's weights at https://huggingface.co/raidium/curia.

Generative AI is reshaping knowledge work, yet existing research focuses predominantly on software engineering and the natural sciences, with limited methodological exploration for the humanities and social sciences. Positioned as a "methodological experiment," this study proposes an AI Agent-based collaborative research workflow (Agentic Workflow) for humanities and social science research. Taiwan's Claude.ai usage data (N = 7,729 conversations, November 2025) from the Anthropic Economic Index (AEI) serves as the empirical vehicle for validating the feasibility of this methodology. This study operates on two levels: the primary level is the design and validation of a methodological framework - a seven-stage modular workflow grounded in three principles: task modularization, human-AI division of labor, and verifiability, with each stage delineating clear roles for human researchers (research judgment and ethical decisions) and AI Agents (information retrieval and text generation); the secondary level is the empirical analysis of AEI Taiwan data - serving as an operational demonstration of the workflow's application to secondary data research, showcasing both the process and output quality (see Appendix A). This study contributes by proposing a replicable AI collaboration framework for humanities and social science researchers, and identifying three operational modes of human-AI collaboration - direct execution, iterative refinement, and human-led - through reflexive documentation of the operational process. This taxonomy reveals the irreplaceability of human judgment in research question formulation, theoretical interpretation, contextualized reasoning, and ethical reflection. Limitations including single-platform data, cross-sectional design, and AI reliability risks are acknowledged.

Spontaneous symmetry breaking is examined by regarding it as a phenomenon in the eternal intermediate state due to sequential perturbations. The concept of the relativistic many-body state is applied to this intermediate state occurring in the collision of massless Dirac fermions. Time in the relativistic many-body state should evolve while maintaining the direction of time in each particle, even if the particles are viewed from any inertial frames. This kinematical requirement leads to spontaneous symmetry breaking in the vacuum of these states, which gives a different meaning to the results of the Higgs model. In this vacuum, massless fermion-antifermion pairs and coherent collection of gauge bosons condense, which determine each other's mass. When a local excitation of the condensed gauge bosons propagates in space, a Higgs-like boson appears. The effective coupling of this Higgs-like boson to gauge bosons is calculated as a one-loop process. With this coupling, the total cross section of the pair annihilation of fermion and antifermion to gauge boson pair is calculated. Renormalizability of this model is discussed using the inductive method. Since the Higgs Lagrangian is not assumed, the divergence we must renormalize is only the logarithmic divergence, not the quadratic one.

Current analysis of additive manufactured niobium-based copper alloys relies on hand annotation due to varying contrast, noise, and image artifacts present in micrographs, slowing iteration speed in alloy development. We present a filtering and segmentation algorithm for detecting precipitates in FIB cross-section micrographs, optimized using linear genetic programming (LGP), which accounts for the various artifacts. To this end, the optimization environment uses a domain-specific language for image processing to iterate on solutions. Programs in this language are a list of image-filtering blocks with tunable parameters that sequentially process an input image, allowing for reliable generation and mutation by a genetic algorithm. Our environment produces optimized human-interpretable MATLAB code representing an image filtering pipeline. Under ideal conditions--a population size of 60 and a maximum program length of 5 blocks--our system was able to find a near-human accuracy solution with an average evaluation error of 1.8% when comparing segmentations pixel-by-pixel to a human baseline using an XOR error evaluation. Our automation work enabled faster iteration cycles and furthered exploration of the material composition and processing space: our optimized pipeline algorithm processes a 3.6 megapixel image in about 2 seconds on average. This ultimately enables convergence on strong, low-activation, precipitation hardened copper alloys for additive manufactured fusion reactor parts.

Stock market prediction presents considerable challenges for investors, financial institutions, and policymakers operating in complex market environments characterized by noise, non-stationarity, and behavioral dynamics. Traditional forecasting methods, including fundamental analysis and technical indicators, often fail to capture the intricate patterns and cross-sectional dependencies inherent in financial markets. This paper presents an integrated framework combining a node transformer architecture with BERT-based sentiment analysis for stock price forecasting. The proposed model represents the stock market as a graph structure where individual stocks form nodes and edges capture relationships including sectoral affiliations, correlated price movements, and supply chain connections. A fine-tuned BERT model extracts sentiment information from social media posts and combines it with quantitative market features through attention-based fusion mechanisms. The node transformer processes historical market data while capturing both temporal evolution and cross-sectional dependencies among stocks. Experiments conducted on 20 S&P 500 stocks spanning January 1982 to March 2025 demonstrate that the integrated model achieves a mean absolute percentage error (MAPE) of 0.80% for one-day-ahead predictions, compared to 1.20% for ARIMA and 1.00% for LSTM. The inclusion of sentiment analysis reduces prediction error by 10% overall and 25% during earnings announcements, while the graph-based architecture contributes an additional 15% improvement by capturing inter-stock dependencies. Directional accuracy reaches 65% for one-day forecasts. Statistical validation through paired t-tests confirms the significance of these improvements (p < 0.05 for all comparisons). The model maintains lower error during high-volatility periods, achieving MAPE of 1.50% while baseline models range from 1.60% to 2.10%.

We present a novel deep learning framework for flow field predictions in irregular domains when the solution is a function of the geometry of either the domain or objects inside the domain. Grid vertices in a computational fluid dynamics (CFD) domain are viewed as point clouds and used as inputs to a neural network based on the PointNet architecture, which learns an end-to-end mapping between spatial positions and CFD quantities. Using our approach, (i) the network inherits desirable features of unstructured meshes (e.g., fine and coarse point spacing near the object surface and in the far field, respectively), which minimizes network training cost; (ii) object geometry is accurately represented through vertices located on object boundaries, which maintains boundary smoothness and allows the network to detect small changes between geometries; and (iii) no data interpolation is utilized for creating training data; thus accuracy of the CFD data is preserved. None of these features are achievable by extant methods based on projecting scattered CFD data into Cartesian grids and then using regular convolutional neural networks. Incompressible laminar steady flow past a cylinder with various shapes for its cross section is considered. The mass and momentum of predicted fields are conserved. We test the generalizability of our network by predicting the flow around multiple objects as well as an airfoil, even though only single objects and no airfoils are observed during training. The network predicts the flow fields hundreds of times faster than our conventional CFD solver, while maintaining excellent to reasonable accuracy.

When forecasting hourly returns for 1,000 US equities, we observe an unexpected phenomenon: predictions become nearly flat and show poor stock ranking, as measured by cross-sectional correlation. We call this forecast collapse. Surprisingly, the phenomenon largely disappears when forecasting trading volume under the same setting. We investigate forecast collapse across time-series foundation models (TSFMs), twelve deep-learning forecasting models, and 97 public benchmark configurations, and find that it is closely tied to target predictability. We identify two distinct reasons behind it: low predictability limits the amplitude of calibrated point forecasts, while per-series objectives leave cross-series structure unidentified. These findings reveal a calibration-ranking tradeoff: optimizing squared error leads to flat predictions, whereas directly optimizing cross-sectional correlation improves ranking but can inflate forecast amplitude by more than an order of magnitude. To address this tradeoff, we introduce CalibRank, a simple objective that balances calibration and ranking. On Finance1K, CalibRank nearly triples cross-sectional correlation while keeping amplitude close to the target, and improves correlation on all tested models. Our results reveal a blind spot in conventional time-series evaluation: per-series metrics can hide failures in cross-series structure needed by downstream decisions.

Estimating causal effect using machine learning (ML) algorithms can help to relax functional form assumptions if used within appropriate frameworks. However, most of these frameworks assume settings with cross-sectional data, whereas researchers often have access to panel data, which in traditional methods helps to deal with unobserved heterogeneity between units. In this paper, we explore how we can adapt double/debiased machine learning (DML) (Chernozhukov et al., 2018) for panel data in the presence of unobserved heterogeneity. This adaptation is challenging because DML's cross-fitting procedure assumes independent data and the unobserved heterogeneity is not necessarily additively separable in settings with nonlinear observed confounding. We assess the performance of several intuitively appealing estimators in a variety of simulations. While we find violations of the cross-fitting assumptions to be largely inconsequential for the accuracy of the effect estimates, many of the considered methods fail to adequately account for the presence of unobserved heterogeneity. However, we find that using predictive models based on the correlated random effects approach (Mundlak, 1978) within DML leads to accurate coefficient estimates across settings, given a sample size that is large relative to the number of observed confounders. We also show that the influence of the unobserved heterogeneity on the observed confounders plays a significant role for the performance of most alternative methods.

Background. Aircraft-wildlife collisions are a documented aviation hazard. The FAA National Wildlife Strike Database is the main public source of U.S. reports, but raw extracts are large and rarely released as versioned aggregates. Methods. We convert the public FAA Access export (STRIKE_REPORTS) to SQLite, define a report as damaging when DAMAGE_LEVEL is one of M, M?, S, D, and fold rows into open aggregates (year, airport, species, aircraft, animal family) via hierarchical SPECIES_ID prefixes. We analyze all civil reports and a commercial subset (AC_MASS 3-5). Rates are per reported strike, not per flight hour, so every rate is conditional on a report having been filed. Trend statistics use complete incident years 1990-2025; cross-sectional facets cover the full seed, incident years 1990-2026. Results. Numbers are locked to the 2026-07-04 freeze. Reported strikes in 2025 reach a series high (24,458 total; 901 damaging). Species that dominate strike counts are not those with the highest damage rates: perching songbirds account for 41.1% of identified strikes but damage aircraft in 1.5% of reports (95% CI 1.4-1.6), whereas deer account for 0.7% but damage aircraft in 81.8% of reports (95% CI 79.8-83.7). Airports ranked by total strikes (led by Denver Intl) diverge from rankings by damaging strikes (led by Sacramento Intl); across the 452 airports with at least 50 reports, volume and conditional damage rate are negatively rank-correlated (Spearman rho = -0.44, p < 0.001); large stations plausibly capture minor events more completely, so this is not a hazard ranking. The share of reports labeled damaging declines over decades, consistent with improved reporting of minor events, while absolute damaging counts peak in 2025. Conclusions. Versioned open aggregates and a documented damage-rate analysis enable independent reuse; released under CC BY 4.0.

Recent studies focusing on the use of radio data in indirect dark matter detection have led to a set of highly competitive limits on the WIMP annihilation cross-section, especially in light of high-resolution data from instruments like ASKAP and MeerKAT. In this work we present an analysis of radio observations of the RXC J0225.1-2928 galaxy cluster, taken from the recent MeerKAT Galaxy Cluster Legacy Survey public data release. We adopt a robust morphological analysis of this source that allows us to derive a set of upper-limits on the annihilation cross-section, and in our most constraining scenario these results are comparable to the most stringent limits yet found in the literature.

EHR audit logs are a highly granular stream of events that capture clinician activities, and is a significant area of interest for research in characterizing clinician workflow on the electronic health record (EHR). Existing techniques to measure the complexity of workflow through EHR audit logs (audit logs) involve time- or frequency-based cross-sectional aggregations that are unable to capture the full complexity of a EHR session. We briefly evaluate the usage of transformer-based tabular language model (tabular LM) in measuring the entropy or disorderedness of action sequences within workflow and release the evaluated models publicly.

The trouble in detecting low mass dark matter due to its low kinetic energy can be ameliorated in the boosted dark matter framework, where a sub-population of galactic dark matter attains very high energy after being up-scattered by energetic standard model particles. However, in such a scenario the upper limits on the cross-section obtained hitherto are typically large. Hence in the minimal extension of standard model where new mediators act as a portal between the dark and visible sectors, the direct detection limits for sub-GeV dark matter might lie within the exclusion region of other ground based searches of the mediator. To evade this deadlock, we allude to blazar boosted dark matter electron scattering in multi-ton neutrino detector Super kamiokande. We consider minimal models such as axion like particle (ALP) and vector portal dark matter being upscattered by high energy blazar jet and analyse the interesting parameter reaches from Super kamiokande in the parameter space of the mediator, surpassing the existing constraints. Besides, this scenario exhibits stronger limits for previously unexplored ALP mediated sub-MeV dark matter search which is difficult due to associated momentum suppression.

Large Language Models (LLMs) have recently been leveraged for asset pricing tasks and stock trading applications, enabling AI agents to generate investment decisions from unstructured financial data. However, most evaluations of LLM timing-based investing strategies are conducted on narrow timeframes and limited stock universes, overstating effectiveness due to survivorship and data-snooping biases. We critically assess their generalizability and robustness by proposing FINSABER, a backtesting framework evaluating timing-based strategies across longer periods and a larger universe of symbols. Systematic backtests over two decades and 100+ symbols reveal that previously reported LLM advantages deteriorate significantly under broader cross-section and over a longer-term evaluation. Our market regime analysis further demonstrates that LLM strategies are overly conservative in bull markets, underperforming passive benchmarks, and overly aggressive in bear markets, incurring heavy losses. These findings highlight the need to develop LLM strategies that are able to prioritise trend detection and regime-aware risk controls over mere scaling of framework complexity.

We describe pre-perihelion optical observations of interstellar comet 3I/ATLAS taken during July - September 2025 using the Nordic Optical Telescope. Fixed aperture photometry of the comet is well described by a power law function of heliocentric distance, rH, with the exponent (``index") n = 3.8+/-0.3 across the 4.6 au to 1.8 au distance range (phase function 0.04+/-0.02 magnitude/degree assumed). This indicates that the dust production rates vary in proportion to rH**(-1.8+/-0.3). An rH**(-2) variation is expected of a strongly volatile material, and consistent with independent spectroscopic observations showing that carbon dioxide is the primary driver of activity. The measured heliocentric index is unremarkable in the context of solar system comets, for which n is widely dispersed, and provides no basis on which to describe 3I as either dynamically old (thermally processed) or new (pristine). The morphology of the comet changes from a Sun-facing dust fan in the early 2025 July observations, to one dominated by an antisolar dust tail at later dates. We attribute the delayed emergence of the tail to the large size (effective radius 0.1 mm) and slow ejection (5 m/s) of the optically dominant dust particles, and their consequently sluggish response to solar radiation pressure. Small (micron-sized) particles may be present but not in numbers sufficient to dominate the scattering cross-section. Their relative depletion possibly reflects interparticle cohesion, which binds small particles more effectively than large ones. A similar preponderance of 0.1 mm grains was reported in 2I/Borisov. However, 2I differed from 3I in having a much smaller (asteroid-like) heliocentric index, n = 1.9+/-0.1. Dust production rates in 3I are 180 kg/s at 2 au, compared with 70 kg/s in 2I/Borisov at the same distance.

Optical coherence tomography (OCT) and scanning laser ophthalmoscopy (SLO) of the eye has become essential to ophthalmology and the emerging field of oculomics, thus requiring a need for transparent, reproducible, and rapid analysis of this data for clinical research and the wider research community. Here, we introduce OCTolyzer, the first open-source toolkit for retinochoroidal analysis in OCT/SLO data. It features two analysis suites for OCT and SLO data, facilitating deep learning-based anatomical segmentation and feature extraction of the cross-sectional retinal and choroidal layers and en face retinal vessels. We describe OCTolyzer and evaluate the reproducibility of its OCT choroid analysis. At the population level, metrics for choroid region thickness were highly reproducible, with a mean absolute error (MAE)/Pearson correlation for macular volume choroid thickness (CT) of 6.7mum/0.99, macular B-scan CT of 11.6mum/0.99, and peripapillary CT of 5.0mum/0.99. Macular choroid vascular index (CVI) also showed strong reproducibility, with MAE/Pearson for volume CVI yielding 0.0271/0.97 and B-scan CVI 0.0130/0.91. At the eye level, measurement noise for regional and vessel metrics was below 5% and 20% of the population's variability, respectively. Outliers were caused by poor-quality B-scans with thick choroids and invisible choroid-sclera boundary. Processing times on a laptop CPU were under three seconds for macular/peripapillary B-scans and 85 seconds for volume scans. OCTolyzer can convert OCT/SLO data into reproducible and clinically meaningful retinochoroidal features and will improve the standardisation of ocular measurements in OCT/SLO image analysis, requiring no specialised training or proprietary software to be used. OCTolyzer is freely available here: https://github.com/jaburke166/OCTolyzer.

Prior work on a social web highlighter located individuality in selection -- which documents a person chooses to highlight -- but measured it cross-sectionally. We ask the temporal question: is a reader's selection signature a trait or a state? We freeze each reader's first six months of highlighting as a profile and track its own-vs-other advantage on their later selections at growing gaps (to 24+ months), with negatives drawn from the same calendar era -- so supply drift cannot masquerade as personal drift -- at a coarse global level and at a fine level whose negatives and controls come from the reader's own interest neighborhood; the anchor cell reproduces the prior cross-sectional level (+0.188 vs +0.169), validating the harness. Four results. Within the same users, the fine-layer advantage shows no statistically detectable paired decline at any horizon (6-12 month retention R = 1.00 [0.85, 1.18], n = 212; the farthest bin is compatible with a modest decline; the only contrast whose interval excludes zero is the coarse layer at 12-24 months, about 13%). The signal is not reducible to repeated domains (~90% survives excluding all profile sources). Within-person drift is slow (a recent-half profile beats the old half by +0.042). Prospectively, personal profiles -- even one built from a reader's earliest documents, median 20 months before evaluation -- rank their next reads at roughly 3x the AP of every simple non-personal prior tested. We use "trait" operationally (a stable signature under continued engagement); the scope is heavy, long-tenured readers of one platform, and exposure is not separable from choice.

Speech processing systems face a fundamental challenge: the human voice changes with age, yet few datasets support rigorous longitudinal evaluation. We introduce VoxKnesset, an open-access dataset of ~2,300 hours of Hebrew parliamentary speech spanning 2009-2025, comprising 393 speakers with recording spans of up to 15 years. Each segment includes aligned transcripts and verified demographic metadata from official parliamentary records. We benchmark modern speech embeddings (WavLM-Large, ECAPA-TDNN, Wav2Vec2-XLSR-1B) on age prediction and speaker verification under longitudinal conditions. Speaker verification EER rises from 2.15\% to 4.58\% over 15 years for the strongest model, and cross-sectionally trained age regressors fail to capture within-speaker aging, while longitudinally trained models recover a meaningful temporal signal. We publicly release the dataset and pipeline to support aging-robust speech systems and Hebrew speech processing.

Machine learning demand forecasts optimize statistical accuracy yet leave excess operational volatility that inflates safety stock and amplifies the Bullwhip effect. We introduce Contextual Deconvolution (CD), a two-stage estimator that reframes demand sensing as a convex decomposition: a kernel-modulated banded operator separates transient promotion-driven shocks from a smooth structural baseline, and hierarchical partial pooling enables catalog-scale deployment without per-SKU training. The operator is data-derived, not imposed---it reduces to the identity wherever the promotional response is impulsive (most of M5, all of Favorita) and contributes only where genuine multi-day carryover exists, so the gains rest on the structural decomposition itself. Evaluating strictly out-of-sample on 30,490 M5 SKUs and 2,845 Favorita items, with calendar-aware baselines given CD's identical future calendar, we anchor the contribution on a full inventory-cost accounting: CD lowers safety stock, holding cost, and order variance but under-provisions event spikes, reducing total cost only when holding costs exceed sim20\% of stockout costs (95\% CI [17%,25%]); otherwise it is an operational-stability and inventory-capital layer, not an expected-cost minimizer. Its accuracy contribution is reliability rather than central tendency: across eleven baselines, CD attains the lowest cross-sectional dispersion of per-SKU error and mis-forecasts by more than 200\% on 0.8\% of SKUs versus 9.9--20.6\% for every baseline, ranking first on both in all four M5 draws. Because the Variance Ratio and std-based safety stock are minimized by any sufficiently smooth forecast, we treat them as diagnostics, not objectives. A supporting analysis shows the learned demand operators are non-normal, yet CD's compact parametric kernel matches their operational performance interpretably.

In the marketing field, understanding consumer heterogeneity, which is the internal or psychological difference among consumers that cannot be captured by behavioral logs, has long been a critical challenge. However, a number of consumers today usually post their evaluation on the specific product on the online platform, which can be the valuable source of such unobservable differences among consumers. Several previous studies have shown the validity of the analysis on text modality, but on the other hand, such analyses may not necessarily demonstrate sufficient predictive accuracy for text alone, as they may not include information readily available from cross-sectional data, such as consumer profile data. In addition, recent advances in machine learning techniques, such as large-scale language models (LLMs) and multimodal learning have made it possible to deal with the various kind of dataset simultaneously, including textual data and the traditional cross-sectional data, and the joint representations can be effectively obtained from multiple modalities. Therefore, this study constructs a product evaluation model that takes into account consumer heterogeneity by multimodal learning of online product reviews and consumer profile information. We also compare multiple models using different modalities or hyper-parameters to demonstrate the robustness of multimodal learning in marketing analysis.

In this work, we introduce Brain Latent Progression (BrLP), a novel spatiotemporal disease progression model based on latent diffusion. BrLP is designed to predict the evolution of diseases at the individual level on 3D brain MRIs. Existing deep generative models developed for this task are primarily data-driven and face challenges in learning disease progressions. BrLP addresses these challenges by incorporating prior knowledge from disease models to enhance the accuracy of predictions. To implement this, we propose to integrate an auxiliary model that infers volumetric changes in various brain regions. Additionally, we introduce Latent Average Stabilization (LAS), a novel technique to improve spatiotemporal consistency of the predicted progression. BrLP is trained and evaluated on a large dataset comprising 11,730 T1-weighted brain MRIs from 2,805 subjects, collected from three publicly available, longitudinal Alzheimer's Disease (AD) studies. In our experiments, we compare the MRI scans generated by BrLP with the actual follow-up MRIs available from the subjects, in both cross-sectional and longitudinal settings. BrLP demonstrates significant improvements over existing methods, with an increase of 22% in volumetric accuracy across AD-related brain regions and 43% in image similarity to the ground-truth scans. The ability of BrLP to generate conditioned 3D scans at the subject level, along with the novelty of integrating prior knowledge to enhance accuracy, represents a significant advancement in disease progression modeling, opening new avenues for precision medicine. The code of BrLP is available at the following link: https://github.com/LemuelPuglisi/BrLP.

Osteoporotic vertebral compression fractures (VCFs) are prevalent in the elderly population, typically assessed on computed tomography (CT) scans by evaluating vertebral height loss. This assessment helps determine the fracture's impact on spinal stability and the need for surgical intervention. However, clinical data indicate that many VCFs exhibit irregular compression, complicating accurate diagnosis. While deep learning methods have shown promise in aiding VCFs screening, they often lack interpretability and sufficient sensitivity, limiting their clinical applicability. To address these challenges, we introduce a novel vertebra synthesis-height loss quantification-VCFs grading framework. Our proposed model, HealthiVert-GAN, utilizes a coarse-to-fine synthesis network designed to generate pseudo-healthy vertebral images that simulate the pre-fracture state of fractured vertebrae. This model integrates three auxiliary modules that leverage the morphology and height information of adjacent healthy vertebrae to ensure anatomical consistency. Additionally, we introduce the Relative Height Loss of Vertebrae (RHLV) as a quantification metric, which divides each vertebra into three sections to measure height loss between pre-fracture and post-fracture states, followed by fracture severity classification using a Support Vector Machine (SVM). Our approach achieves state-of-the-art classification performance on both the Verse2019 dataset and our private dataset, and it provides cross-sectional distribution maps of vertebral height loss. This practical tool enhances diagnostic sensitivity in clinical settings and assisting in surgical decision-making. Our code is available: https://github.com/zhibaishouheilab/HealthiVert-GAN.

Computed Tomography (CT) scan, which produces 3D volumetric medical data that can be viewed as hundreds of cross-sectional images (a.k.a. slices), provides detailed anatomical information for diagnosis. For radiologists, creating CT radiology reports is time-consuming and error-prone. A visual question answering (VQA) system that can answer radiologists' questions about some anatomical regions on the CT scan and even automatically generate a radiology report is urgently needed. However, existing VQA systems cannot adequately handle the CT radiology question answering (CTQA) task for: (1) anatomic complexity makes CT images difficult to understand; (2) spatial relationship across hundreds slices is difficult to capture. To address these issues, this paper proposes CT-Agent, a multimodal agentic framework for CTQA. CT-Agent adopts anatomically independent tools to break down the anatomic complexity; furthermore, it efficiently captures the across-slice spatial relationship with a global-local token compression strategy. Experimental results on two 3D chest CT datasets, CT-RATE and RadGenome-ChestCT, verify the superior performance of CT-Agent.

In a recent paper Juodis and Reese (2022) (JR) show that the application of the CD test proposed by Pesaran (2004) to residuals from panels with latent factors results in over-rejection. They propose a randomized test statistic to correct for over-rejection, and add a screening component to achieve power. This paper considers the same problem but from a different perspective, and shows that the standard CD test remains valid if the latent factors are weak in the sense the strength is less than half. In the case where latent factors are strong, we propose a bias-corrected version, CD*, which is shown to be asymptotically standard normal under the null of error cross-sectional independence and have power against network type alternatives. This result is shown to hold for pure latent factor models as well as for panel regression models with latent factors. The case where the errors are serially correlated is also considered. Small sample properties of the CD* test are investigated by Monte Carlo experiments and are shown to have the correct size for strong and weak factors as well as for Gaussian and non-Gaussian errors. In contrast, it is found that JR's test tends to over-reject in the case of panels with non-Gaussian errors, and has low power against spatial network alternatives. In an empirical application, using the CD* test, it is shown that there remains spatial error dependence in a panel data model for real house price changes across 377 Metropolitan Statistical Areas in the U.S., even after the effects of latent factors are filtered out.

We review recent findings from a detailed simulation study of the merging cluster El Gordo and present new results inferred from weak lensing data. We found that the observed spatial offsets between the different mass components are well reproduced in merging simulations that include self-interacting dark matter (DM), with an elastic cross-section per unit mass of approximately \sigma_DM/m_X ~ 4 -5 cm^2/gr. Moreover, a relative line-of-sight peculiar velocity on the order of several hundred km/s is found between the two stellar components of the colliding subclusters. These findings strongly suggest the possibility that, in a very energetic cluster collision, DM could possess collisional properties. However, the self-interacting DM merger model presented here is not without difficulties. The values found for \sigma_DM/m_X being in conflict with the current upper bounds on cluster scales. As a solution to this tension we argue that in major cluster mergers the physical modeling of DM interactions, based on the scattering of DM particles, should be considered too simplistic. Additionally, the DM halos of the post-collision clusters have cored density profiles with core radii r_c ~ 300 kpc. Consequently, the associated reduced tangential shear lensing profiles consistently tend to zero at angles \theta <~ 40^{''}. This result is inconsistent with what is deduced from the measured profiles. These profiles exhibit a diverging behavior when \theta --> 0, as predicted by an NFW mass model. We argue that such contradictions cannot be easily reconciled within the DM models presented so far as an alternative to the collisionless paradigm. However, we suggest that this tension can be used as a unique test bed to probe new DM physics.

We present a comprehensive study of the Muonic Portal to Vector Dark Matter (MPVDM), a minimal yet phenomenologically rich extension of the Standard Model featuring a new SU(2)_D gauge symmetry and vector-like muons. In this framework the dark sector interacts with the Standard Model only through these heavy leptons, linking dark matter and the muon sector. The MPVDM can simultaneously explain the observed relic abundance and the muon anomalous magnetic moment a_mu under both the "tension" and "compatibility" scenarios motivated by recent (g-2)_mu results. A key finding is a generic off-resonance velocity suppression mechanism that allows light (<1 GeV) vector dark matter to evade CMB limits near 2*m_DM ~ m_H_D. Unlike scenarios based on ultra narrow Breit-Wigner resonances and early kinetic decoupling, the suppression follows from the temperature evolution of the annihilation cross section in a moderately detuned near resonant regime, where being 10-20 percent below resonance gives the required CMB era suppression without fine tuning. A five dimensional parameter scan shows that the tension scenario requires sub GeV dark matter with g_D ~ 1e-3 and TeV scale vector like muons, while the compatibility scenario admits a broad mass range up to multi TeV. Recasting ATLAS and CMS searches for mu+ mu- + E_T^miss sets a lower bound of about 850 GeV on vector like muons. The MPVDM thus offers a unified, predictive, and experimentally accessible framework linking dark matter and muon physics across cosmological and collider frontiers.

While recent low-cost radar-camera approaches have shown promising results in multi-modal 3D object detection, both sensors face challenges from environmental and intrinsic disturbances. Poor lighting or adverse weather conditions degrade camera performance, while radar suffers from noise and positional ambiguity. Achieving robust radar-camera 3D object detection requires consistent performance across varying conditions, a topic that has not yet been fully explored. In this work, we first conduct a systematic analysis of robustness in radar-camera detection on five kinds of noises and propose RobuRCDet, a robust object detection model in BEV. Specifically, we design a 3D Gaussian Expansion (3DGE) module to mitigate inaccuracies in radar points, including position, Radar Cross-Section (RCS), and velocity. The 3DGE uses RCS and velocity priors to generate a deformable kernel map and variance for kernel size adjustment and value distribution. Additionally, we introduce a weather-adaptive fusion module, which adaptively fuses radar and camera features based on camera signal confidence. Extensive experiments on the popular benchmark, nuScenes, show that our model achieves competitive results in regular and noisy conditions.

We present RadarGen, a diffusion model for synthesizing realistic automotive radar point clouds from multi-view camera imagery. RadarGen adapts efficient image-latent diffusion to the radar domain by representing radar measurements in bird's-eye-view form that encodes spatial structure together with radar cross section (RCS) and Doppler attributes. A lightweight recovery step reconstructs point clouds from the generated maps. To better align generation with the visual scene, RadarGen incorporates BEV-aligned depth, semantic, and motion cues extracted from pretrained foundation models, which guide the stochastic generation process toward physically plausible radar patterns. Conditioning on images makes the approach broadly compatible, in principle, with existing visual datasets and simulation frameworks, offering a scalable direction for multimodal generative simulation. Evaluations on large-scale driving data show that RadarGen captures characteristic radar measurement distributions and reduces the gap to perception models trained on real data, marking a step toward unified generative simulation across sensing modalities.

Spatial intelligence is crucial for vision--language models (VLMs) in the physical world, yet many benchmarks evaluate largely unconstrained scenes where models can exploit 2D shortcuts. We introduce SSI-Bench, a VQA benchmark for spatial reasoning on constrained manifolds, built from complex real-world 3D structures whose feasible configurations are tightly governed by geometric, topological, and physical constraints. SSI-Bench contains 1,000 ranking questions spanning geometric and topological reasoning and requiring a diverse repertoire of compositional spatial operations, such as mental rotation, cross-sectional inference, occlusion reasoning, and force-path reasoning. It is created via a fully human-centered pipeline: ten researchers spent over 400 hours curating images, annotating structural components, and designing questions to minimize pixel-level cues. Evaluating 31 widely used VLMs reveals a large gap to humans: the best open-source model achieves 22.2% accuracy and the strongest closed-source model reaches 33.6%, while humans score 91.6%. Encouraging models to think yields only marginal gains, and error analysis points to failures in structural grounding and constraint-consistent 3D reasoning. Project page: https://ssi-bench.github.io.

Generating scientific manuscripts requires maintaining alignment between narrative reasoning, experimental evidence, and visual artifacts across the document lifecycle. Existing language-model generation pipelines rely on unconstrained text synthesis with validation applied only after generation, often producing structural drift, missing figures or tables, and cross-section inconsistencies. We introduce Story2Proposal, a contract-governed multi-agent framework that converts a research story into a structured manuscript through coordinated agents operating under a persistent shared visual contract. The system organizes architect, writer, refiner, and renderer agents around a contract state that tracks section structure and registered visual elements, while evaluation agents supply feedback in a generate evaluate adapt loop that updates the contract during generation. Experiments on tasks derived from the Jericho research corpus show that Story2Proposal achieved an expert evaluation score of 6.145 versus 3.963 for DirectChat (+2.182) across GPT, Claude, Gemini, and Qwen backbones. Compared with the structured generation baseline Fars, Story2Proposal obtained an average score of 5.705 versus 5.197, indicating improved structural consistency and visual alignment.

In 2018, a test run with muons in the North Area at CERN was performed, running parasitically downstream of the COMPASS spectrometer. The aim of the test was to investigate the elastic interactions of muons on atomic electrons, in an experimental configuration similar to the one proposed by the project MUonE, which plans to perform a very precise measurement of the differential cross-section of the elastic interactions. COMPASS was taking data with a 190 GeV pion beam, stopped in a tungsten beam dump: the muons from these pions decays passed through a setup including a graphite target followed by 10 planes of Si tracker and a BGO crystal electromagnetic calorimeter placed at the end of the tracker. The elastic scattering events were analysed, and compared to expectations from MonteCarlo simulation.

Learning profitable intraday trading policies from financial time series is challenging due to heavy noise, non-stationarity, and strong cross-sectional dependence among related assets. We propose WaveLSFormer, a learnable wavelet-based long-short Transformer that jointly performs multi-scale decomposition and return-oriented decision learning. Unlike standard time-series forecasting that optimizes prediction error and typically requires a separate position-sizing or portfolio-construction step, our model directly outputs a market-neutral long/short portfolio and is trained end-to-end on a trading objective with risk-aware regularization. Specifically, a learnable wavelet front-end generates low-/high-frequency components via an end-to-end trained filter bank, guided by spectral regularizers that encourage stable and well-separated frequency bands. To fuse multi-scale information, we introduce a low-guided high-frequency injection (LGHI) module that refines low-frequency representations with high-frequency cues while controlling training stability. The model outputs a portfolio of long/short positions that is rescaled to satisfy a fixed risk budget and is optimized directly with a trading objective and risk-aware regularization. Extensive experiments on five years of hourly data across six industry groups, evaluated over ten random seeds, demonstrate that WaveLSFormer consistently outperforms MLP, LSTM and Transformer backbones, with and without fixed discrete wavelet front-ends. On average in all industries, WaveLSFormer achieves a cumulative overall strategy return of 0.607 pm 0.045 and a Sharpe ratio of 2.157 pm 0.166, substantially improving both profitability and risk-adjusted returns over the strongest baselines.

This technical report presents EXAONE Forecast for Finance (EXAONE Finance), a financial time series (TS) foundation model (TSFM) tailored to financial forecasting. Recent TSFMs achieve strong zero-shot performance through large-scale pretraining. However, they are primarily developed for general-domain TS and largely rely on self-attention backbones whose computational cost grows quadratically with sequence length and variate count. Moreover, they assume fully observed inputs and are pretrained on corpora that fail to capture the unique dynamics of financial markets. These limitations hinder their applicability to finance, where long, many-channel, intermittently observed panels are common. To address these challenges, EXAONE Finance adopts an attention-free architecture, replacing self-attention with two simple yet effective linear-time operators: 1) a causal 1D convolution for temporal mixing and 2) a group-aware pooling multi-layer perceptron (MLP) for variate mixing. Furthermore, a masked context augmentation exposes the model to contiguous missing spans during training, improving robustness to the missingness pervasive in financial markets. EXAONE Finance is pretrained on a large-scale financial corpus covering not only equities but also foreign exchange, commodities, crypto-assets, fixed income, and macroeconomic indicators. On FinVerse, a financial forecasting benchmark covering diverse asset classes, EXAONE Finance attains state-of-the-art performance, ranking first across all three evaluation tiers---point-forecast accuracy, cross-sectional asset ranking, and portfolio profitability.

Synthetic sequential tabular data are increasingly used for privacy-preserving data sharing and research, yet conventional tabular metrics often overlook temporal structure. Existing single-table and relational evaluation protocols largely collapse records into static distributions, leaving key temporal properties insufficiently evaluated. We introduce Seq2Synth, a unified benchmark for assessing these properties. Its taxonomy characterizes temporal and schema properties to determine applicable evaluations, covering timestamp, cross-sectional, longitudinal, and structural fidelity, alongside trajectory-aware utility and privacy. Across seven core datasets from a 13-dataset benchmark and eight generators, models with near-perfect static fidelity still violate basic temporal constraints, producing duplicate timestamps, irregular intervals, and incomplete observation grids. Moreover, static and temporal-aware rankings diverge substantially, showing that temporal fidelity must be evaluated directly rather than inferred from static or relational scores. Project page and online appendices are available at: https://seq2synth.github.io/.

High-resolution 3D generation increasingly relies on voxel latents and multi-stage pipelines that first predict active structure and then synthesize local geometry. While effective, this design fragments continuous surfaces into many local tokens, inflates generation cost, and often weakens topological consistency for thin or highly connected shapes. We introduce SILSA, a topology-aware 3D generation framework that represents shapes with compact sliding-window slice latents. Instead of generating expensive voxel tokens, SILSA uses a fixed set of overlapping slices along the three canonical axes, where each token summarizes a local depth window to preserve cross-sectional continuity and support single-stage rectified-flow generation. A Slice VAE encodes oriented surface samples into multi-axis slice latents and reconstructs them with a sparse volumetric decoder, while a Volumetric Anchor Lattice coordinates directional slice streams through a shared 3D workspace. To preserve structural correctness, we introduce slice-level topology supervision that matches persistence diagrams and aligns Betti transitions across neighboring slices. Experiments show that SILSA improves structural fidelity while substantially reducing generation cost. SILSA improves PSNR by 8.7%, coverage by 5.96 absolute points, and Betti error by 9.2% over the strongest baseline, while using 70.0% fewer tokens than the next-most compact baseline and over 98% fewer tokens than sparse or hierarchical tokenizers, effectively reducing training memory by 40.4% and inference time by 58.5%. Qualitative results further show improved preservation of thin structures, repeated components, and long-range connectivity.

Recent advances in long chain-of-thought (CoT) reasoning have largely prioritized answer accuracy and token efficiency, while overlooking aspects critical to trustworthiness. We argue that usable reasoning systems must be trustworthy, characterized by three properties: interpretability, faithfulness, and reliability. To this end, we propose ReFIne, a new training framework that integrates supervised fine-tuning with GRPO to encourage models to: (i) improve interpretability by producing structured, tag-based traces with high-level planning that are easier for humans to follow; (ii) enhance faithfulness by explicitly disclosing the decisive information guiding each solution, with consistent cross-section references; and (iii) promote reliability by providing self-assessments of both the derivation's soundness and the confidence of the final answer. We apply ReFIne to the Qwen3 models at multiple scales (1.7B/4B/8B) and evaluate across mathematical benchmarks of varying difficulty. Our experimental results show that ReFIne models generate clearer and better-structured reasoning traces (interpretability +44.0%), more faithfully expose their underlying decision process (faithfulness +18.8%), and offer informative confidence estimates (reliability +42.4%). These findings highlight an overlooked but important direction: reasoning models should be optimized not only for accuracy, but also for broader dimensions of trustworthiness. Our code is available at: https://github.com/Trustworthy-ML-Lab/Training_Trustworthy_LRM_with_Refine