Daily Papers

Recent advances in robot foundation models have highlighted the potential of in-context learning (ICL) for adapting robot behavior from demonstrations without further fine-tuning. Previous work has used retrieval-based post-training to equip pretrained vision-language-action (VLA) models with the capability for ICL by teaching them to condition action predictions on retrieved visually-relevant demonstration chunks. However, the effectiveness of retrieval hinges on selecting context relevant to the current execution stage, which visual similarity alone may not capture. We introduce VICTR, a framework enabling in-context learning in VLAs via progress-informed context retrieval built around an In-Context Value Function Estimator (IC-VFE). IC-VFE conditions on a reference demonstration video, a language instruction and the current observation to estimate task-relative progress. By conditioning progress estimation on a reference demonstration, IC-VFE can align the current state with a demonstrated execution even for tasks unseen during training. VICTR uses the estimated progress to select demonstration chunks at corresponding stages of execution and supplies them to a π_{0.5} policy post-trained for in-context action generation. On unseen out-of-domain real-world manipulation tasks, VICTR raises the success rate from 6.2% for a fine-tuned π_{0.5} baseline to 23.8% and more than doubles the task progress rate, from 28.9% to 55.5%. Project page with code, data and videos: https://ai4ce.github.io/VICTR/

Predicting and executing a sequence of actions without intermediate replanning, known as action chunking, is increasingly used in robot learning from human demonstrations. Yet, its effects on the learned policy remain inconsistent: some studies find it crucial for achieving strong results, while others observe decreased performance. In this paper, we first dissect how action chunking impacts the divergence between a learner and a demonstrator. We find that action chunking allows the learner to better capture the temporal dependencies in demonstrations but at the cost of reduced reactivity to unexpected states. To address this tradeoff, we propose Bidirectional Decoding (BID), a test-time inference algorithm that bridges action chunking with closed-loop adaptation. At each timestep, BID samples multiple candidate predictions and searches for the optimal one based on two criteria: (i) backward coherence, which favors samples that align with previous decisions; (ii) forward contrast, which seeks samples of high likelihood for future plans. By coupling decisions within and across action chunks, BID promotes both long-term consistency and short-term reactivity. Experimental results show that our method boosts the performance of two state-of-the-art generative policies across seven simulation benchmarks and two real-world tasks. Code and videos are available at https://bid-robot.github.io.

Deformable object manipulation stands as one of the most captivating yet formidable challenges in robotics. While previous techniques have predominantly relied on learning latent dynamics through demonstrations, typically represented as either particles or images, there exists a pertinent limitation: acquiring suitable demonstrations, especially for long-horizon tasks, can be elusive. Moreover, basing learning entirely on demonstrations can hamper the model's ability to generalize beyond the demonstrated tasks. In this work, we introduce a demonstration-free hierarchical planning approach capable of tackling intricate long-horizon tasks without necessitating any training. We employ large language models (LLMs) to articulate a high-level, stage-by-stage plan corresponding to a specified task. For every individual stage, the LLM provides both the tool's name and the Python code to craft intermediate subgoal point clouds. With the tool and subgoal for a particular stage at our disposal, we present a granular closed-loop model predictive control strategy. This leverages Differentiable Physics with Point-to-Point correspondence (DiffPhysics-P2P) loss in the earth mover distance (EMD) space, applied iteratively. Experimental findings affirm that our technique surpasses multiple benchmarks in dough manipulation, spanning both short and long horizons. Remarkably, our model demonstrates robust generalization capabilities to novel and previously unencountered complex tasks without any preliminary demonstrations. We further substantiate our approach with experimental trials on real-world robotic platforms. Our project page: https://qq456cvb.github.io/projects/donut.

Recent studies show that large language models (LLMs) can be instructed to effectively perform zero-shot passage re-ranking, in which the results of a first stage retrieval method, such as BM25, are rated and reordered to improve relevance. In this work, we improve LLM-based re-ranking by algorithmically selecting few-shot demonstrations to include in the prompt. Our analysis investigates the conditions where demonstrations are most helpful, and shows that adding even one demonstration is significantly beneficial. We propose a novel demonstration selection strategy based on difficulty rather than the commonly used semantic similarity. Furthermore, we find that demonstrations helpful for ranking are also effective at question generation. We hope our work will spur more principled research into question generation and passage ranking.

Modern AI systems, especially those interacting with the physical world, increasingly require real-time performance. However, the high latency of state-of-the-art generalist models, including recent vision-language action models (VLAs), poses a significant challenge. While action chunking has enabled temporal consistency in high-frequency control tasks, it does not fully address the latency problem, leading to pauses or out-of-distribution jerky movements at chunk boundaries. This paper presents a novel inference-time algorithm that enables smooth asynchronous execution of action chunking policies. Our method, real-time chunking (RTC), is applicable to any diffusion- or flow-based VLA out of the box with no re-training. It generates the next action chunk while executing the current one, "freezing" actions guaranteed to execute and "inpainting" the rest. To test RTC, we introduce a new benchmark of 12 highly dynamic tasks in the Kinetix simulator, as well as evaluate 6 challenging real-world bimanual manipulation tasks. Results demonstrate that RTC is fast, performant, and uniquely robust to inference delay, significantly improving task throughput and enabling high success rates in precise tasks x2013 such as lighting a match x2013 even in the presence of significant latency. See https://pi.website/research/real_time_chunking for videos.

Action chunking enables robot policies to produce temporally coherent behavior, but generating multi-step action sequences with flow-based policies incurs latency that is incompatible with real-time control. Under asynchronous execution, the robot continues executing the current chunk while the next one is generated, causing even minor delays to create inconsistencies at chunk boundaries. Existing methods address this problem by steering generation toward the already executed action prefix. We instead show that prefix consistency can be achieved by selecting an appropriate initial noise before generation begins, allowing the unmodified flow ODE to produce a coherent next chunk. This reframes asynchronous inference as a noise selection problem rather than a trajectory steering problem. We introduce PAINT, a training-free method that finds this noise via backward Euler inversion and constructs the final chunk through a repainting rule. In summary, PAINT requires no gradients, retraining, or policy modification; yet it improves execution consistency and task performance across 12 simulated benchmarks and 6 real-world manipulation tasks spanning single-arm, bimanual, and humanoid embodiments. Website: ~https://paint-action-chunking.github.io{https://paint-action-chunking.github.io}.

Fine manipulation tasks, such as threading cable ties or slotting a battery, are notoriously difficult for robots because they require precision, careful coordination of contact forces, and closed-loop visual feedback. Performing these tasks typically requires high-end robots, accurate sensors, or careful calibration, which can be expensive and difficult to set up. Can learning enable low-cost and imprecise hardware to perform these fine manipulation tasks? We present a low-cost system that performs end-to-end imitation learning directly from real demonstrations, collected with a custom teleoperation interface. Imitation learning, however, presents its own challenges, particularly in high-precision domains: errors in the policy can compound over time, and human demonstrations can be non-stationary. To address these challenges, we develop a simple yet novel algorithm, Action Chunking with Transformers (ACT), which learns a generative model over action sequences. ACT allows the robot to learn 6 difficult tasks in the real world, such as opening a translucent condiment cup and slotting a battery with 80-90% success, with only 10 minutes worth of demonstrations. Project website: https://tonyzhaozh.github.io/aloha/

Today, large language models (LLMs) are taught to use new tools by providing a few demonstrations of the tool's usage. Unfortunately, demonstrations are hard to acquire, and can result in undesirable biased usage if the wrong demonstration is chosen. Even in the rare scenario that demonstrations are readily available, there is no principled selection protocol to determine how many and which ones to provide. As tasks grow more complex, the selection search grows combinatorially and invariably becomes intractable. Our work provides an alternative to demonstrations: tool documentation. We advocate the use of tool documentation, descriptions for the individual tool usage, over demonstrations. We substantiate our claim through three main empirical findings on 6 tasks across both vision and language modalities. First, on existing benchmarks, zero-shot prompts with only tool documentation are sufficient for eliciting proper tool usage, achieving performance on par with few-shot prompts. Second, on a newly collected realistic tool-use dataset with hundreds of available tool APIs, we show that tool documentation is significantly more valuable than demonstrations, with zero-shot documentation significantly outperforming few-shot without documentation. Third, we highlight the benefits of tool documentations by tackling image generation and video tracking using just-released unseen state-of-the-art models as tools. Finally, we highlight the possibility of using tool documentation to automatically enable new applications: by using nothing more than the documentation of GroundingDino, Stable Diffusion, XMem, and SAM, LLMs can re-invent the functionalities of the just-released Grounded-SAM and Track Anything models.

We present SciRIFF (Scientific Resource for Instruction-Following and Finetuning), a dataset of 137K instruction-following demonstrations for 54 tasks covering five essential scientific literature understanding capabilities: information extraction, summarization, question answering, claim verification, and classification. SciRIFF demonstrations are notable for their long input contexts, detailed task specifications, and complex structured outputs. While instruction-following resources are available in specific domains such as clinical medicine and chemistry, SciRIFF is the first dataset focused on extracting and synthesizing information from research literature across a wide range of scientific fields. To demonstrate the utility of SciRIFF, we develop a sample-efficient strategy to adapt a general instruction-following model for science by performing additional finetuning on a mix of general-domain and SciRIFF demonstrations. In evaluations on nine held-out scientific tasks, our model -- called SciTulu -- improves over a strong LLM baseline by 28.1% and 6.5% at the 7B and 70B scales respectively, while maintaining general instruction-following performance within 2% of the baseline. We are optimistic that SciRIFF will facilitate the development and evaluation of LLMs to help researchers navigate the ever-growing body of scientific literature. We release our dataset, model checkpoints, and data processing and evaluation code to enable further research.

Chunking is a crucial preprocessing step in retrieval-augmented generation (RAG) systems, significantly impacting retrieval effectiveness across diverse datasets. In this study, we systematically evaluate fixed-size chunking strategies and their influence on retrieval performance using multiple embedding models. Our experiments, conducted on both short-form and long-form datasets, reveal that chunk size plays a critical role in retrieval effectiveness -- smaller chunks (64-128 tokens) are optimal for datasets with concise, fact-based answers, whereas larger chunks (512-1024 tokens) improve retrieval in datasets requiring broader contextual understanding. We also analyze the impact of chunking on different embedding models, finding that they exhibit distinct chunking sensitivities. While models like Stella benefit from larger chunks, leveraging global context for long-range retrieval, Snowflake performs better with smaller chunks, excelling at fine-grained, entity-based matching. Our results underscore the trade-offs between chunk size, embedding models, and dataset characteristics, emphasizing the need for improved chunk quality measures, and more comprehensive datasets to advance chunk-based retrieval in long-document Information Retrieval (IR).

The sample inefficiency of standard deep reinforcement learning methods precludes their application to many real-world problems. Methods which leverage human demonstrations require fewer samples but have been researched less. As demonstrated in the computer vision and natural language processing communities, large-scale datasets have the capacity to facilitate research by serving as an experimental and benchmarking platform for new methods. However, existing datasets compatible with reinforcement learning simulators do not have sufficient scale, structure, and quality to enable the further development and evaluation of methods focused on using human examples. Therefore, we introduce a comprehensive, large-scale, simulator-paired dataset of human demonstrations: MineRL. The dataset consists of over 60 million automatically annotated state-action pairs across a variety of related tasks in Minecraft, a dynamic, 3D, open-world environment. We present a novel data collection scheme which allows for the ongoing introduction of new tasks and the gathering of complete state information suitable for a variety of methods. We demonstrate the hierarchality, diversity, and scale of the MineRL dataset. Further, we show the difficulty of the Minecraft domain along with the potential of MineRL in developing techniques to solve key research challenges within it.

In-context learning (ICL) facilitates large language models (LLMs) exhibiting spectacular emergent capabilities in various scenarios. Unfortunately, introducing demonstrations easily makes the prompt length explode, bringing a significant burden to hardware. In addition, random demonstrations usually achieve limited improvements in ICL, necessitating demonstration selection among accessible candidates. Previous studies introduce extra modules to perform demonstration compression or selection independently. In this paper, we propose an ICL framework UniICL, which Unifies demonstration selection and compression, and final response generation via a single frozen LLM. Specifically, UniICL first projects actual demonstrations and inference text inputs into short virtual tokens, respectively. Then, virtual tokens are applied to select suitable demonstrations by measuring semantic similarity within latent space among candidate demonstrations and inference input. Finally, inference text inputs together with selected virtual demonstrations are fed into the same frozen LLM for response generation. Notably, UniICL is a parameter-efficient framework that only contains 17M trainable parameters originating from the projection layer. We conduct experiments and analysis over in- and out-domain datasets of both generative and understanding tasks, encompassing ICL scenarios with plentiful and limited demonstration candidates. Results show that UniICL effectively unifies 12 times compression, demonstration selection, and response generation, efficiently scaling up the baseline from 4-shot to 64-shot ICL in IMDb with 24 GB CUDA allocation

Recent advances in internet-scale video data pretraining have led to the development of text-to-video generative models that can create high-quality videos across a broad range of visual concepts, synthesize realistic motions and render complex objects. Hence, these generative models have the potential to become general-purpose simulators of the physical world. However, it is unclear how far we are from this goal with the existing text-to-video generative models. To this end, we present VideoPhy, a benchmark designed to assess whether the generated videos follow physical commonsense for real-world activities (e.g. marbles will roll down when placed on a slanted surface). Specifically, we curate diverse prompts that involve interactions between various material types in the physical world (e.g., solid-solid, solid-fluid, fluid-fluid). We then generate videos conditioned on these captions from diverse state-of-the-art text-to-video generative models, including open models (e.g., CogVideoX) and closed models (e.g., Lumiere, Dream Machine). Our human evaluation reveals that the existing models severely lack the ability to generate videos adhering to the given text prompts, while also lack physical commonsense. Specifically, the best performing model, CogVideoX-5B, generates videos that adhere to the caption and physical laws for 39.6% of the instances. VideoPhy thus highlights that the video generative models are far from accurately simulating the physical world. Finally, we propose an auto-evaluator, VideoCon-Physics, to assess the performance reliably for the newly released models.

Prompt compression methods enhance the efficiency of Large Language Models (LLMs) and minimize the cost by reducing the length of input context. The goal of prompt compression is to shorten the LLM prompt while maintaining a high generation quality. However, existing solutions, mainly based on token removal, face challenges such as information loss and structural incoherence, like missing grammar elements in a sentence, or incomplete word phrases after token removal. Such challenges limit the final generation quality of LLM. To overcome these limitations, we present a novel generative prompt compression method. Unlike the existing token removal methods, our method centers at a chunking-and-summarization mechanism. Specifically, our method splits prompt into semantically coherent chunks and rewrites the chunks to be more concise. The chunks are reconstructed into meaningful prompt finally. We design several optimization techniques for the mechanism, including optimized semantic chunking, outlier chunk handling, dynamic compression ratio, compression prioritization, and keyword maintaining. These techniques effectively improve the identifying and preserving of critical information and coherence among texts, as well as providing finer grind control of the compression ratio. We conduct extensive evaluation on question-answering and summarization tasks, with datasets covering multiple different domain. The evaluation shows our method achieves a significantly better compression quality, and higher stability than the state-of-the-art methods, especially under high compression ratio, which proves the effectiveness and practicality of our method.

The effectiveness upper bound of retrieval-augmented generation (RAG) is fundamentally constrained by the semantic integrity and information granularity of text chunks in its knowledge base. To address these challenges, this paper proposes QChunker, which restructures the RAG paradigm from retrieval-augmentation to understanding-retrieval-augmentation. Firstly, QChunker models the text chunking as a composite task of text segmentation and knowledge completion to ensure the logical coherence and integrity of text chunks. Drawing inspiration from Hal Gregersen's "Questions Are the Answer" theory, we design a multi-agent debate framework comprising four specialized components: a question outline generator, text segmenter, integrity reviewer, and knowledge completer. This framework operates on the principle that questions serve as catalysts for profound insights. Through this pipeline, we successfully construct a high-quality dataset of 45K entries and transfer this capability to small language models. Additionally, to handle long evaluation chains and low efficiency in existing chunking evaluation methods, which overly rely on downstream QA tasks, we introduce a novel direct evaluation metric, ChunkScore. Both theoretical and experimental validations demonstrate that ChunkScore can directly and efficiently discriminate the quality of text chunks. Furthermore, during the text segmentation phase, we utilize document outlines for multi-path sampling to generate multiple candidate chunks and select the optimal solution employing ChunkScore. Extensive experimental results across four heterogeneous domains exhibit that QChunker effectively resolves aforementioned issues by providing RAG with more logically coherent and information-rich text chunks.

Large language models have exhibited intriguing in-context learning capability, achieving promising zero- and few-shot performance without updating the parameters. However, conventional in-context learning is usually restricted by length constraints, rendering it ineffective to absorb supervision from a large number of examples. In order to go beyond few shots, we introduce structured prompting that breaks the length limit and scales in-context learning to thousands of examples. Specifically, demonstration examples are separately encoded with well-designed position embeddings, and then they are jointly attended by the test example using a rescaled attention mechanism. So we can scale the number of exemplars with linear complexity instead of quadratic complexity with respect to length. Experimental results on a diverse set of tasks show that our approach improves end-task performance and reduces evaluation variance over conventional in-context learning as the number of demonstration examples increases. Code has been released at https://aka.ms/structured-prompting.

Large Language Models (LLMs) have shown strong in-context learning (ICL) abilities with a few demonstrations. However, one critical challenge is how to select demonstrations to elicit the full potential of LLMs. In this paper, we propose Curriculum Demonstration Selection (CDS), a novel demonstration selection method for ICL. Instead of merely using similarity, CDS additionally partitions samples by their complexity measurements. Following curriculum learning, CDS then selects demonstrations from easy to difficult. Thus the selected demonstrations cover a wide range of difficulty levels, enabling LLMs to learn from varied complexities within the training set. Experiments demonstrate that our CDS consistently outperforms baseline methods, achieving notable improvements across nine LLMs on three benchmarks. Moreover, CDS proves especially effective in enhancing LLM performance in solving challenging problems.

Retrieval-augmented generation (RAG) over long documents typically involves splitting the text into smaller chunks, which serve as the basic units for retrieval. However, due to dependencies across the original document, contextual information is often essential for accurately interpreting each chunk. To address this, prior work has explored encoding longer context windows to produce embeddings for longer chunks. Despite these efforts, gains in retrieval and downstream tasks remain limited. This is because (1) longer chunks strain the capacity of embedding models due to the increased amount of information they must encode, and (2) many real-world applications still require returning localized evidence due to constraints on model or human bandwidth. We propose an alternative approach to this challenge by representing short chunks in a way that is conditioned on a broader context window to enhance retrieval performance -- i.e., situating a chunk's meaning within its context. We further show that existing embedding models are not well-equipped to encode such situated context effectively, and thus introduce a new training paradigm and develop the situated embedding models (SitEmb). To evaluate our method, we curate a book-plot retrieval dataset specifically designed to assess situated retrieval capabilities. On this benchmark, our SitEmb-v1 model based on BGE-M3 substantially outperforms state-of-the-art embedding models, including several with up to 7-8B parameters, with only 1B parameters. Our 8B SitEmb-v1.5 model further improves performance by over 10% and shows strong results across different languages and several downstream applications.

Graphical User Interfaces (GUIs) are central to human-computer interaction, yet automating complex GUI tasks remains a major challenge for autonomous agents, largely due to a lack of scalable, high-quality training data. While recordings of human demonstrations offer a rich data source, they are typically long, unstructured, and lack annotations, making them difficult for agents to learn from.To address this, we introduce ShowUI-Aloha, a comprehensive pipeline that transforms unstructured, in-the-wild human screen recordings from desktop environments into structured, actionable tasks. Our framework includes four key components: A recorder that captures screen video along with precise user interactions like mouse clicks, keystrokes, and scrolls. A learner that semantically interprets these raw interactions and the surrounding visual context, translating them into descriptive natural language captions. A planner that reads the parsed demonstrations, maintains task states, and dynamically formulates the next high-level action plan based on contextual reasoning. An executor that faithfully carries out these action plans at the OS level, performing precise clicks, drags, text inputs, and window operations with safety checks and real-time feedback. Together, these components provide a scalable solution for collecting and parsing real-world human data, demonstrating a viable path toward building general-purpose GUI agents that can learn effectively from simply observing humans.

Test-Time Training (TTT) models context dependencies by adapting part of the model's weights (referred to as fast weights) during inference. This fast weight, akin to recurrent states in RNNs, stores temporary memories of past tokens in the current sequence. Existing TTT methods struggled to show effectiveness in handling long-context data, due to their inefficiency on modern GPUs. The TTT layers in many of these approaches operate with extremely low FLOPs utilization (often <5%) because they deliberately apply small online minibatch sizes (e.g., updating fast weights every 16 or 64 tokens). Moreover, a small minibatch implies fine-grained block-wise causal dependencies in the data, unsuitable for data beyond 1D ordered sequences, like sets or N-dimensional grids such as images or videos. In contrast, we pursue the opposite direction by using an extremely large chunk update, ranging from 2K to 1M tokens across tasks of varying modalities, which we refer to as Large Chunk Test-Time Training (LaCT). It improves hardware utilization by orders of magnitude, and more importantly, facilitates scaling of nonlinear state size (up to 40% of model parameters), hence substantially improving state capacity, all without requiring cumbersome and error-prone kernel implementations. It also allows easy integration of sophisticated optimizers, e.g. Muon for online updates. We validate our approach across diverse modalities and tasks, including novel view synthesis with image set, language models, and auto-regressive video diffusion. Our approach can scale up to 14B-parameter AR video diffusion model on sequences up to 56K tokens. In our longest sequence experiment, we perform novel view synthesis with 1 million context length. We hope this work will inspire and accelerate new research in the field of long-context modeling and test-time training. Website: https://tianyuanzhang.com/projects/ttt-done-right

Significant strides have been made using large vision-language models, like Stable Diffusion (SD), for a variety of downstream tasks, including image editing, image correspondence, and 3D shape generation. Inspired by these advancements, we explore leveraging these extensive vision-language models for segmenting images at any desired granularity using as few as one annotated sample by proposing SLiMe. SLiMe frames this problem as an optimization task. Specifically, given a single training image and its segmentation mask, we first extract attention maps, including our novel "weighted accumulated self-attention map" from the SD prior. Then, using the extracted attention maps, the text embeddings of Stable Diffusion are optimized such that, each of them, learn about a single segmented region from the training image. These learned embeddings then highlight the segmented region in the attention maps, which in turn can then be used to derive the segmentation map. This enables SLiMe to segment any real-world image during inference with the granularity of the segmented region in the training image, using just one example. Moreover, leveraging additional training data when available, i.e. few-shot, improves the performance of SLiMe. We carried out a knowledge-rich set of experiments examining various design factors and showed that SLiMe outperforms other existing one-shot and few-shot segmentation methods.

Large language models (LLMs) are able to solve various tasks with only a few demonstrations utilizing their in-context learning (ICL) abilities. However, LLMs often rely on their pre-trained semantic priors of demonstrations rather than on the input-label relationships to proceed with ICL prediction. In this work, we term this phenomenon as the 'Demonstration Shortcut'. While previous works have primarily focused on improving ICL prediction results for predefined tasks, we aim to rectify the Demonstration Shortcut, thereby enabling the LLM to effectively learn new input-label relationships from demonstrations. To achieve this, we introduce In-Context Calibration, a demonstration-aware calibration method. We evaluate the effectiveness of the proposed method in two settings: (1) the Original ICL Task using the standard label space and (2) the Task Learning setting, where the label space is replaced with semantically unrelated tokens. In both settings, In-Context Calibration demonstrates substantial improvements, with results generalized across three LLM families (OPT, GPT, and Llama2) under various configurations.

Recent advances in Retrieval-Augmented Generation (RAG) systems have popularized semantic chunking, which aims to improve retrieval performance by dividing documents into semantically coherent segments. Despite its growing adoption, the actual benefits over simpler fixed-size chunking, where documents are split into consecutive, fixed-size segments, remain unclear. This study systematically evaluates the effectiveness of semantic chunking using three common retrieval-related tasks: document retrieval, evidence retrieval, and retrieval-based answer generation. The results show that the computational costs associated with semantic chunking are not justified by consistent performance gains. These findings challenge the previous assumptions about semantic chunking and highlight the need for more efficient chunking strategies in RAG systems.

With large pretrained models, existing methods have effectively improved instruction-based video editing. However, most of them rely on an in-place editing assumption. They align the edited video with the given source clip frame by frame over a fixed time span. This pattern fails for open-ended streams, e.g., restyling a live game or applying a camera move to an ongoing shot. In such cases, edits must extend to future frames as they arrive, rather than be applied to a static input clip. In this paper, we study this setting and name it infinite video editing: given a preceding segment and an edit request, a model must generate the next segment that continues the stream while applying the requested edit. This process repeats as an unbounded sequence of edit instructions arrives. This task brings two challenges: the edit must be a faithful continuation rather than a frame-wise rewrite, and generation quality must remain stable as edits accumulate. To address them, we first design a data-collection pipeline for infinite video editing. Based on the collected data, we propose InfinityEdit, a lightweight edit adapter that equips a streaming video generator with unbounded editing ability. The adapter contains three attention modules. History cross-attention guides the denoising frames using the input frames. Temporal causal self-attention keeps temporal cues flowing only from earlier frames to later ones. Edit cross-attention injects the edit request into generation. During inference, the adapter is activated only in the chunk where an edit request arrives. Subsequent chunks are generated by the original model with a reset anchor frame. This scheme applies the edit while preserving the original model's infinite generation ability. Extensive experiments show that InfinityEdit faithfully continues the stream under each edit, and stays stable over unbounded edit sequences.

Retrieval-Augmented Generation (RAG), while serving as a viable complement to large language models (LLMs), often overlooks the crucial aspect of text chunking within its pipeline, which impacts the quality of knowledge-intensive tasks. This paper introduces the concept of Meta-Chunking, which refers to a granularity between sentences and paragraphs, consisting of a collection of sentences within a paragraph that have deep linguistic logical connections. To implement Meta-Chunking, we designed two strategies based on LLMs: Margin Sampling Chunking and Perplexity Chunking. The former employs LLMs to perform binary classification on whether consecutive sentences need to be segmented, making decisions based on the probability difference obtained from margin sampling. The latter precisely identifies text chunk boundaries by analyzing the characteristics of perplexity distribution. Additionally, considering the inherent complexity of different texts, we propose a strategy that combines Meta-Chunking with dynamic merging to achieve a balance between fine-grained and coarse-grained text chunking. Experiments conducted on eleven datasets demonstrate that Meta-Chunking can more efficiently improve the performance of single-hop and multi-hop question answering based on RAG. For instance, on the 2WikiMultihopQA dataset, it outperforms similarity chunking by 1.32 while only consuming 45.8% of the time. Our code is available at https://github.com/IAAR-Shanghai/Meta-Chunking.

We investigate how to enhance the physical fidelity of video generation models by leveraging synthetic videos derived from computer graphics pipelines. These rendered videos respect real-world physics, such as maintaining 3D consistency, and serve as a valuable resource that can potentially improve video generation models. To harness this potential, we propose a solution that curates and integrates synthetic data while introducing a method to transfer its physical realism to the model, significantly reducing unwanted artifacts. Through experiments on three representative tasks emphasizing physical consistency, we demonstrate its efficacy in enhancing physical fidelity. While our model still lacks a deep understanding of physics, our work offers one of the first empirical demonstrations that synthetic video enhances physical fidelity in video synthesis. Website: https://kevinz8866.github.io/simulation/

Retrieval-Augmented Generation (RAG), while serving as a viable complement to large language models (LLMs), often overlooks the crucial aspect of text chunking within its pipeline. This paper initially introduces a dual-metric evaluation method, comprising Boundary Clarity and Chunk Stickiness, to enable the direct quantification of chunking quality. Leveraging this assessment method, we highlight the inherent limitations of traditional and semantic chunking in handling complex contextual nuances, thereby substantiating the necessity of integrating LLMs into chunking process. To address the inherent trade-off between computational efficiency and chunking precision in LLM-based approaches, we devise the granularity-aware Mixture-of-Chunkers (MoC) framework, which consists of a three-stage processing mechanism. Notably, our objective is to guide the chunker towards generating a structured list of chunking regular expressions, which are subsequently employed to extract chunks from the original text. Extensive experiments demonstrate that both our proposed metrics and the MoC framework effectively settle challenges of the chunking task, revealing the chunking kernel while enhancing the performance of the RAG system.

Current diffusion-based text-to-video methods are limited to producing short video clips of a single shot and lack the capability to generate multi-shot videos with discrete transitions where the same character performs distinct activities across the same or different backgrounds. To address this limitation we propose a framework that includes a dataset collection pipeline and architectural extensions to video diffusion models to enable text-to-multi-shot video generation. Our approach enables generation of multi-shot videos as a single video with full attention across all frames of all shots, ensuring character and background consistency, and allows users to control the number, duration, and content of shots through shot-specific conditioning. This is achieved by incorporating a transition token into the text-to-video model to control at which frames a new shot begins and a local attention masking strategy which controls the transition token's effect and allows shot-specific prompting. To obtain training data we propose a novel data collection pipeline to construct a multi-shot video dataset from existing single-shot video datasets. Extensive experiments demonstrate that fine-tuning a pre-trained text-to-video model for a few thousand iterations is enough for the model to subsequently be able to generate multi-shot videos with shot-specific control, outperforming the baselines. You can find more details in https://shotadapter.github.io/

Human experience in digital environments offers a vast, underexplored resource of authentic, untrimmed interactions that contain rich procedural knowledge. We introduce Demo2Tutorial, a framework that transforms this experience captured via screen recordings and interaction logs into structured, multimodal software tutorials for teaching both humans and agents. Demo2Tutorial first collects human experience via a dedicated recorder, then parses raw experience using a multimodal Action Parser to reconstruct perception, action, and intent. A Step Planner then abstracts these steps into hierarchical task graphs representing goals and steps. Finally, a Tutorial Composer transforms the parsed experience into structured, reusable image-text instructions. We evaluate the tutorial generation quality on a new benchmark derived from official software documentation. We further demonstrate that this distilled representation benefits (i) human learning, by automatically generating multimodal tutorials, and (ii) agent learning, by improving downstream GUI-agent planning and generalization. Experiments show Demo2Tutorial produces high-quality tutorials that surpass human-authored ones and significantly outperform baseline methods, while enabling both faster human task completion and improved GUI agent planning, demonstrating that structured tutorials distilled from human experience can serve as effective knowledge representations for advancing both human learning and agent capabilities. Code and data will be available at https://github.com/showlab/Demo2Tutorial.

Large language models (LMs) are able to in-context learn -- perform a new task via inference alone by conditioning on a few input-label pairs (demonstrations) and making predictions for new inputs. However, there has been little understanding of how the model learns and which aspects of the demonstrations contribute to end task performance. In this paper, we show that ground truth demonstrations are in fact not required -- randomly replacing labels in the demonstrations barely hurts performance on a range of classification and multi-choce tasks, consistently over 12 different models including GPT-3. Instead, we find that other aspects of the demonstrations are the key drivers of end task performance, including the fact that they provide a few examples of (1) the label space, (2) the distribution of the input text, and (3) the overall format of the sequence. Together, our analysis provides a new way of understanding how and why in-context learning works, while opening up new questions about how much can be learned from large language models through inference alone.

Academic presentation videos have become an essential medium for research communication, yet producing them remains highly labor-intensive, often requiring hours of slide design, recording, and editing for a short 2 to 10 minutes video. Unlike natural video, presentation video generation involves distinctive challenges: inputs from research papers, dense multi-modal information (text, figures, tables), and the need to coordinate multiple aligned channels such as slides, subtitles, speech, and human talker. To address these challenges, we introduce PaperTalker, the first benchmark of 101 research papers paired with author-created presentation videos, slides, and speaker metadata. We further design four tailored evaluation metrics--Meta Similarity, PresentArena, PresentQuiz, and IP Memory--to measure how videos convey the paper's information to the audience. Building on this foundation, we propose PaperTalker, the first multi-agent framework for academic presentation video generation. It integrates slide generation with effective layout refinement by a novel effective tree search visual choice, cursor grounding, subtitling, speech synthesis, and talking-head rendering, while parallelizing slide-wise generation for efficiency. Experiments on Paper2Video demonstrate that the presentation videos produced by our approach are more faithful and informative than existing baselines, establishing a practical step toward automated and ready-to-use academic video generation. Our dataset, agent, and code are available at https://github.com/showlab/Paper2Video.

While generative AI has significantly advanced video editing, existing methods primarily focus on single-shot or short video clips. Editing long videos with multiple instructions remains a formidable challenge. Naive chunking strategies, e.g., fixed-duration segmentation, often lead to entity fragmentation, severe editing hallucinations, and disrupted temporal continuity. To bridge this gap, we introduce the Multi-Instruction Multi-Shot Long-Video Editing (MMLVE) task, which is structured around three core objectives: Cross-Shot Editing Consistency (CSEC), Multi-Instruction Decoupling (MID), and Zero-Destruction on Spatiotemporal Structure (ZDSS). To tackle these three unique challenges, we introduce an agentic editing framework that leverages the synergy of Large Language Models (LLMs) and Vision-Language Models (VLMs) to achieve shot-level video decoupling and precise instruction parsing. Furthermore, to comprehensively evaluate this task, we construct MMLVE-Bench, which is an MMLVE-focused dataset characterized by complex real-world spatiotemporal dynamics, high-density heterogeneous instructions, and sparse, random entity distributions. Three MMLVE-focused evaluation metrics are further exploited to assess the quality of the editing results. Extensive experiments demonstrate that our MMLVE-Agent outperforms existing closed-source SOTA approaches (e.g., Seedance 2.0), successfully eliminating editing hallucinations, preserving cross-shot editing consistency, and attaining seamless spatiotemporal transitions.

Vision-language action (VLA) models increasingly adopt chunked action heads to satisfy real-time constraints; however, this introduces boundary jitter: overlapping regions between consecutive chunks often yield inconsistent predictions, degrading temporal coherence and the task success rate. Existing methods, such as inference-time blending, merely reweight mismatched proposals without correcting underlying errors, leading to residual accumulation under biased or noisy histories. We propose ChunkFlow, a seam-aware training-and-execution framework for chunked policies that aligns chunk structure with boundary execution. It partitions each chunk into frozen, editable, and future zones, applies deterministic overlap blending at execution, and trains raw predictions with seam and first- and second-order continuity losses. History corruption and scheduled sampling improve robustness to executed-history errors, while an AWAC fine-tuning stage adapts the policy without removing these structural regularizers. Under mild smoothness assumptions, pre-blending seam discrepancies provably decay with increasing overlap. Experiments on CALVIN, LIBERO, and real robots show an improved success-stability trade-off with low-latency inference. Project page: https://cytoderm-ai.github.io/chunkflow.

Procedural videos, exemplified by recipe demonstrations, are instrumental in conveying step-by-step instructions. However, understanding such videos is challenging as it involves the precise localization of steps and the generation of textual instructions. Manually annotating steps and writing instructions is costly, which limits the size of current datasets and hinders effective learning. Leveraging large but noisy video-transcript datasets for pre-training can boost performance but demands significant computational resources. Furthermore, transcripts contain irrelevant content and differ in style from human-written instructions. To mitigate these issues, we propose a novel technique, Sieve-&-Swap, to automatically generate high-quality training data for the recipe domain: (i) Sieve: filters irrelevant transcripts and (ii) Swap: acquires high-quality text by replacing transcripts with human-written instruction from a text-only recipe dataset. The resulting dataset is three orders of magnitude smaller than current web-scale datasets but enables efficient training of large-scale models. Alongside Sieve-&-Swap, we propose Procedure Transformer (ProcX), a model for end-to-end step localization and instruction generation for procedural videos. When pre-trained on our curated dataset, this model achieves state-of-the-art performance on YouCook2 and Tasty while using a fraction of the training data. We have released code and dataset.

Despite the growing video understanding capabilities of recent Multimodal Large Language Models (MLLMs), existing video benchmarks primarily assess understanding based on models' static, internal knowledge, rather than their ability to learn and adapt from dynamic, novel contexts from few examples. To bridge this gap, we present Demo-driven Video In-Context Learning, a novel task focused on learning from in-context demonstrations to answer questions about the target videos. Alongside this, we propose Demo-ICL-Bench, a challenging benchmark designed to evaluate demo-driven video in-context learning capabilities. Demo-ICL-Bench is constructed from 1200 instructional YouTube videos with associated questions, from which two types of demonstrations are derived: (i) summarizing video subtitles for text demonstration; and (ii) corresponding instructional videos as video demonstrations. To effectively tackle this new challenge, we develop Demo-ICL, an MLLM with a two-stage training strategy: video-supervised fine-tuning and information-assisted direct preference optimization, jointly enhancing the model's ability to learn from in-context examples. Extensive experiments with state-of-the-art MLLMs confirm the difficulty of Demo-ICL-Bench, demonstrate the effectiveness of Demo-ICL, and thereby unveil future research directions.

Retrieval-augmented generation is moving beyond text into long, egocentric video, where systems must select query-relevant chunks across multiple modalities and temporal granularities. Yet progress in VideoRAG is limited by two gaps: existing benchmarks allow queries to be answered without the video, obscuring retrieval errors, and prior methods apply a single modality-granularity configuration per query, ignoring chunk-level variability. We address both by introducing V-RAGBench, a benchmark of langlequery, evidence chunk, answerrangle triplets that enables faithful, decoupled evaluation of retrieval and generation, and CARVE, a simple method that runs parallel retrievers across configurations and employs chunk-adaptive reranking to identify the winning configuration for each chunk. Each chunk then enters the generator under its winning configuration selected during retrieval, yielding an interleaved evidence form where the chunk-level decision propagates across both stages. CARVE outperforms eight recent VideoRAG baselines, with the chunks supplied to the generator interleaving multiple configurations rather than sharing a single one, a behavior unattainable by query-level methods.

Advanced autoregressive (AR) video generation models have improved visual fidelity and interactivity, but the quadratic complexity of attention remains a primary bottleneck for efficient deployment. While existing sparse attention solutions have shown promise on bidirectional models, we identify that applying these solutions to AR models leads to considerable performance degradation for two reasons: isolated consideration of chunk generation and insufficient utilization of past informative context. Motivated by these observations, we propose Light Forcing, the first sparse attention solution tailored for AR video generation models. It incorporates a Chunk-Aware Growth mechanism to quantitatively estimate the contribution of each chunk, which determines their sparsity allocation. This progressive sparsity increase strategy enables the current chunk to inherit prior knowledge in earlier chunks during generation. Additionally, we introduce a Hierarchical Sparse Attention to capture informative historical and local context in a coarse-to-fine manner. Such two-level mask selection strategy (\ie, frame and block level) can adaptively handle diverse attention patterns. Extensive experiments demonstrate that our method outperforms existing sparse attention in quality (\eg, 84.5 on VBench) and efficiency (\eg, 1.2{sim}1.3times end-to-end speedup). Combined with FP8 quantization and LightVAE, Light Forcing further achieves a 2.3times speedup and 19.7\,FPS on an RTX~5090 GPU. Code will be released at https://github.com/chengtao-lv/LightForcing{https://github.com/chengtao-lv/LightForcing}.

Recently, state-of-the-art text-to-image generation models, such as Flux and Ideogram 2.0, have made significant progress in sentence-level visual text rendering. In this paper, we focus on the more challenging scenarios of article-level visual text rendering and address a novel task of generating high-quality business content, including infographics and slides, based on user provided article-level descriptive prompts and ultra-dense layouts. The fundamental challenges are twofold: significantly longer context lengths and the scarcity of high-quality business content data. In contrast to most previous works that focus on a limited number of sub-regions and sentence-level prompts, ensuring precise adherence to ultra-dense layouts with tens or even hundreds of sub-regions in business content is far more challenging. We make two key technical contributions: (i) the construction of scalable, high-quality business content dataset, i.e., Infographics-650K, equipped with ultra-dense layouts and prompts by implementing a layer-wise retrieval-augmented infographic generation scheme; and (ii) a layout-guided cross attention scheme, which injects tens of region-wise prompts into a set of cropped region latent space according to the ultra-dense layouts, and refine each sub-regions flexibly during inference using a layout conditional CFG. We demonstrate the strong results of our system compared to previous SOTA systems such as Flux and SD3 on our BizEval prompt set. Additionally, we conduct thorough ablation experiments to verify the effectiveness of each component. We hope our constructed Infographics-650K and BizEval can encourage the broader community to advance the progress of business content generation.

Document chunking is a crucial component of Retrieval-Augmented Generation (RAG), as it directly affects the retrieval of relevant and precise context. Conventional fixed-length and recursive splitters often produce arbitrary, incoherent segments that fail to preserve semantic structure. Although semantic chunking has gained traction, its influence on generation quality remains underexplored. This paper introduces two efficient semantic chunking methods, Projected Similarity Chunking (PSC) and Metric Fusion Chunking (MFC), trained on PubMed data using three different embedding models. We further present an evaluation framework that measures the effect of chunking on both retrieval and generation by augmenting PubMedQA with full-text PubMed Central articles. Our results show substantial retrieval improvements (24x with PSC) in MRR and higher Hits@k on PubMedQA. We provide a comprehensive analysis, including statistical significance and response-time comparisons with common chunking libraries. Despite being trained on a single domain, PSC and MFC also generalize well, achieving strong out-of-domain generation performance across multiple datasets. Overall, our findings confirm that our semantic chunkers, especially PSC, consistently deliver superior performance.

We study how document chunking choices impact the reliability of Retrieval-Augmented Generation (RAG) systems in industry. While practice often relies on heuristics, our end-to-end evaluation on Natural Questions systematically varies chunking method (token, sentence, semantic, code), chunk size, overlap, and context length. We use a standard industrial setup: SPLADE retrieval and a Mistral-8B generator. We derive actionable lessons for cost-efficient deployment: (i) overlap provides no measurable benefit and increases indexing cost; (ii) sentence chunking is the most cost-effective method, matching semantic chunking up to ~5k tokens; (iii) a "context cliff" reduces quality beyond ~2.5k tokens; and (iv) optimal context depends on the goal (semantic quality peaks at small contexts; exact match at larger ones).

Chain-of-Thought (CoT) prompting reveals that large language models are capable of performing complex reasoning via intermediate steps. CoT prompting is primarily categorized into three approaches. The first approach utilizes straightforward prompts like ``Let's think step by step'' to generate a sequential thought process before yielding an answer. The second approach makes use of human-crafted, step-by-step demonstrations to guide the model's reasoning process. The third automates the generation of reasoned demonstrations with the 'Let's think step by step'.This approach sometimes leads to reasoning errors, highlighting the need to diversify demonstrations to mitigate its misleading effects. However, diverse demonstrations pose challenges for effective representations. In this work, we propose ECHO, a self-harmonized chain-of-thought prompting method. It consolidates diverse solution paths into a uniform and effective solution pattern.ECHO demonstrates the best overall performance across three reasoning domains.

This technical report presents the training methodology and evaluation results of the open-source dewey_en_beta embedding model. The increasing demand for retrieval-augmented generation (RAG) systems and the expanding context window capabilities of large language models (LLMs) have created critical challenges for conventional embedding models. Current approaches often struggle to maintain semantic coherence when processing documents exceeding typical sequence length limitations, significantly impacting retrieval performance in knowledge-intensive applications. This paper presents dewey_en_beta, a novel text embedding model that achieves excellent performance on MTEB (Eng, v2) and LongEmbed benchmark while supporting 128K token sequences. Our technical contribution centers on chunk alignment training, an innovative methodology that enables the simultaneous generation of localized chunk embeddings and global document-level representations through distillation. Information regarding the model release can be found at https://huggingface.co/infgrad/dewey_en_beta.

Scaling humanoid motion foundation models is constrained by the scarcity of diverse, robot-executable data and by the difficulty of jointly learning from heterogeneous multimodal inputs while supporting real-time closed-loop control. We present Movens-5M, constructed from raw Internet videos through clip generation, quality filtering, semantic annotation, motion recovery, and physical refinement with humanoid retargeting and execution verification. It contains 15 million human-motion sequences and 5 million physically executable humanoid-motion sequences spanning over 10,000 hours, aligned with text, RGB video, speech, and music. Building on this data, we introduce Movens-Zero, a scalable understanding-generation-execution architecture that supports joint learning across modalities and real-time closed-loop execution. Task-mixed flow-matching training jointly optimizes a single action expert across seven generation tasks, enabling direct motion generation from text, speech, music, and video. Multimodal Real-Time Chunking connects overlapping chunks under continuously updated instructions and robot states for continuous closed-loop execution. We further introduce Movens-Intent, a four-track benchmark with 8,192 expert-verified condition-motion pairs across text, speech, music, and video. Experiments show consistent gains across all four modalities when scaling execution-verified data from 1% to 100% and action-expert capacity from 64M to 911M parameters, while demonstrating that data quality and cross-modal supervision improve generation and execution.

Transforming static research papers into dynamic media such as posters, slides, and videos is essential for effective dissemination but remains a labor-intensive challenge. Existing automated approaches often treat these formats in isolation and consequently fail to maintain semantic consistency across the entire presentation suite. We address this fragmentation by formalizing the task of unified presentation suite generation and proposing OmniPresent to orchestrate the creation of coherent deliverables. Our framework adopts a renderable HTML representation to enable centralized content planning and a self-correcting verify-and-repair loop that actively resolves conflicts across modalities. We further facilitate scalable research in this domain by releasing OmniPreBench, a comprehensive dataset comprising over one thousand papers with paired artifacts, and establishing a rigorous VLM-based evaluation protocol. Empirical results confirm that our method generates high-quality and faithful presentation suites that significantly surpass strong baselines in both accuracy and visual appeal.

We present a novel Learning from Demonstration (LfD) method, Deformable Manipulation from Demonstrations (DMfD), to solve deformable manipulation tasks using states or images as inputs, given expert demonstrations. Our method uses demonstrations in three different ways, and balances the trade-off between exploring the environment online and using guidance from experts to explore high dimensional spaces effectively. We test DMfD on a set of representative manipulation tasks for a 1-dimensional rope and a 2-dimensional cloth from the SoftGym suite of tasks, each with state and image observations. Our method exceeds baseline performance by up to 12.9% for state-based tasks and up to 33.44% on image-based tasks, with comparable or better robustness to randomness. Additionally, we create two challenging environments for folding a 2D cloth using image-based observations, and set a performance benchmark for them. We deploy DMfD on a real robot with a minimal loss in normalized performance during real-world execution compared to simulation (~6%). Source code is on github.com/uscresl/dmfd

We present a two-stage text-to-3D generation system, namely 3DTopia, which generates high-quality general 3D assets within 5 minutes using hybrid diffusion priors. The first stage samples from a 3D diffusion prior directly learned from 3D data. Specifically, it is powered by a text-conditioned tri-plane latent diffusion model, which quickly generates coarse 3D samples for fast prototyping. The second stage utilizes 2D diffusion priors to further refine the texture of coarse 3D models from the first stage. The refinement consists of both latent and pixel space optimization for high-quality texture generation. To facilitate the training of the proposed system, we clean and caption the largest open-source 3D dataset, Objaverse, by combining the power of vision language models and large language models. Experiment results are reported qualitatively and quantitatively to show the performance of the proposed system. Our codes and models are available at https://github.com/3DTopia/3DTopia

Recent approaches have demonstrated the promise of using diffusion models to generate interactive and explorable worlds. However, most of these methods face critical challenges such as excessively large parameter sizes, reliance on lengthy inference steps, and rapidly growing historical context, which severely limit real-time performance and lack text-controlled generation capabilities. To address these challenges, we propose \method, a novel framework designed to generate realistic, interactive, and continuous worlds from a single image or text prompt. \method achieves this through a carefully designed framework that supports keyboard-based exploration of the generated worlds. The framework comprises three core components: (1) a long-video generation framework integrating unified context compression with linear attention; (2) a real-time streaming acceleration strategy powered by bidirectional attention distillation and an enhanced text embedding scheme; (3) a text-controlled method for generating world events. We have provided the codebase in the supplementary material.

Interactive 3D assets used in games and simulation are typically decomposed into specific semantic parts to support animation, physics, and scripted behaviors, yet most generative 3D models produce either monolithic meshes or arbitrary part decompositions that cannot be aligned with application-specific requirements. We present CubePart, a generative framework for open-vocabulary, part-controllable 3D mesh generation that exposes part structure as an explicit inference-time control signal. Given a global text prompt and a user-defined parts schema expressed as an open-ended list of part names, our method generates a set of meshes - one per schema element - that assemble into a coherent object while respecting the specified semantic structure. To enable this capability, we introduce a scalable data pipeline to construct a large open-vocabulary, part-labeled 3D dataset, along with a two-stage generative architecture that separates global shape synthesis from part-level decoding. We demonstrate that the resulting assets can be directly integrated into game engines and driven by animation and behavior scripts without manual post-processing. Project Page: https://cubepart.github.io/

WALL-WM is a World Action Model that shifts video-action learning from chunk-centric optimization to event-grounded Vision-Language-Action pretraining, using semantically coherent action events as the atomic unit of learning. Existing WAMs commonly initialize from multimodal or video foundation models and then optimize fixed-length action chunks conditioned directly on the current observation and instruction. Although convenient, this chunk-centric formulation creates a fundamental granularity mismatch. Language describes semantic goals and events, vision evolves through continuous scene dynamics, and actions operate at control-level timescales; forcing all three into the same fixed-length prediction window turns VLA training into short-horizon correlation fitting. WALL-WM addresses this mismatch by organizing both supervision and data around semantic events. Specifically, it pairs event-grounded VLA pretraining with a data ecosystem built from event-level captions and cluster-balanced sampling, enabling scalable learning over diverse behaviors, scenes, and task structures. From the same event-pretrained backbone, WALL-WM supports two complementary inference modes. The event mode consumes next-event descriptions and enables variable-length execution chunks, while the unified mode uses a VLM with Staircase Decoding to condition conventional fixed-length chunk inference while preserving a gradient-continuous VLA path. Together with Muon-optimizer-based large-scale pretraining infrastructure, WALL-WM provides a practical scale-up recipe for general-purpose WAMs. Experiments show that WALL-WM generalizes broadly across language, scenes, and tasks, achieving state-of-the-art performance in large-scale real-world generalization evaluation.

In this paper, we present a system to restore analog videos of historical archives. These videos often contain severe visual degradation due to the deterioration of their tape supports that require costly and slow manual interventions to recover the original content. The proposed system uses a multi-frame approach and is able to deal with severe tape mistracking, which results in completely scrambled frames. Tests on real-world videos from a major historical video archive show the effectiveness of our demo system. The code and the pre-trained model are publicly available at https://github.com/miccunifi/analog-video-restoration.

The ability of Large Language Models (LLMs) to process and generate coherent text is markedly weakened when the number of input tokens exceeds their pretraining length. Given the expensive overhead of finetuning large-scale models with longer sequences, we propose Dual Chunk Attention (DCA), which enables Llama2 70B to support context windows of more than 100k tokens without continual training. By decomposing the attention computation for long sequences into chunk-based modules, DCA manages to effectively capture the relative positional information of tokens within the same chunk (Intra-Chunk) and across distinct chunks (Inter-Chunk), as well as integrates seamlessly with Flash Attention. In addition to its impressive extrapolation capability, DCA achieves performance on practical long-context tasks that is comparable to or even better than that of finetuned models. When compared with proprietary models, our training-free 70B model attains 94% of the performance of gpt-3.5-16k, indicating it is a viable open-source alternative. All code and data used in this work are released at https://github.com/HKUNLP/ChunkLlama.

Large language models (LLMs) can perform complex reasoning by generating intermediate reasoning steps. Providing these steps for prompting demonstrations is called chain-of-thought (CoT) prompting. CoT prompting has two major paradigms. One leverages a simple prompt like "Let's think step by step" to facilitate step-by-step thinking before answering a question. The other uses a few manual demonstrations one by one, each composed of a question and a reasoning chain that leads to an answer. The superior performance of the second paradigm hinges on the hand-crafting of task-specific demonstrations one by one. We show that such manual efforts may be eliminated by leveraging LLMs with the "Let's think step by step" prompt to generate reasoning chains for demonstrations one by one, i.e., let's think not just step by step, but also one by one. However, these generated chains often come with mistakes. To mitigate the effect of such mistakes, we find that diversity matters for automatically constructing demonstrations. We propose an automatic CoT prompting method: Auto-CoT. It samples questions with diversity and generates reasoning chains to construct demonstrations. On ten public benchmark reasoning tasks with GPT-3, Auto-CoT consistently matches or exceeds the performance of the CoT paradigm that requires manual designs of demonstrations. Code is available at https://github.com/amazon-research/auto-cot

Action chunking --- the practice of predicting a sequence of actions and executing a prefix open-loop --- has emerged as a key enabler of recent progress in imitation learning for robotic manipulation. However, executing long open-loop prefixes reduces reactivity, limiting policies' ability to correct for errors. Further, the mechanisms underlying these performance benefits remain poorly understood: prior works cite mitigating compounding errors, absorbing inference latency, or smoothing motions, but provide limited controlled evidence or guidance for preserving reactivity. In this work, we argue that long open-loop execution primarily helps short-context policies imitate "non-Markovian demonstrations". Across four simulation and two real-world tasks, we show that expert non-Markovianity strongly shapes the relationship between task success and open-loop execution horizon. Further, we investigate the impact of compounding errors --- the prevailing explanation for long open-loop execution in prior work --- and find that while they matter, expert non-Markovianity has a much stronger impact in our experimental setting. Finally, we show that when policies are provided with a sufficiently long context, open-loop execution is no longer beneficial and the most reactive, closed-loop policies perform best. While imitation learning has seen great success using long open-loop execution, our findings motivate long-context, reactive policies as a more principled and performant paradigm.

We present BLOCK, an open-source bi-stage character-to-skin pipeline that generates pixel-perfect Minecraft skins from arbitrary character concepts. BLOCK decomposes the problem into (i) a 3D preview synthesis stage driven by a large multimodal model (MLLM) with a carefully designed prompt-and-reference template, producing a consistent dual-panel (front/back) oblique-view Minecraft-style preview; and (ii) a skin decoding stage based on a fine-tuned FLUX.2 model that translates the preview into a skin atlas image. We further propose EvolveLoRA, a progressive LoRA curriculum (text-to-image rightarrow image-to-image rightarrow preview-to-skin) that initializes each phase from the previous adapter to improve stability and efficiency. BLOCK is released with all prompt templates and fine-tuned weights to support reproducible character-to-skin generation.

Learning skills in open-world environments is essential for developing agents capable of handling a variety of tasks by combining basic skills. Online demonstration videos are typically long but unsegmented, making them difficult to segment and label with skill identifiers. Unlike existing methods that rely on sequence sampling or human labeling, we have developed a self-supervised learning-based approach to segment these long videos into a series of semantic-aware and skill-consistent segments. Drawing inspiration from human cognitive event segmentation theory, we introduce Skill Boundary Detection (SBD), an annotation-free temporal video segmentation algorithm. SBD detects skill boundaries in a video by leveraging prediction errors from a pretrained unconditional action-prediction model. This approach is based on the assumption that a significant increase in prediction error indicates a shift in the skill being executed. We evaluated our method in Minecraft, a rich open-world simulator with extensive gameplay videos available online. Our SBD-generated segments improved the average performance of conditioned policies by 63.7% and 52.1% on short-term atomic skill tasks, and their corresponding hierarchical agents by 11.3% and 20.8% on long-horizon tasks. Our method can leverage the diverse YouTube videos to train instruction-following agents. The project page can be found in https://craftjarvis.github.io/SkillDiscovery.

Language instructions and demonstrations are two natural ways for users to teach robots personalized tasks. Recent progress in Large Language Models (LLMs) has shown impressive performance in translating language instructions into code for robotic tasks. However, translating demonstrations into task code continues to be a challenge due to the length and complexity of both demonstrations and code, making learning a direct mapping intractable. This paper presents Demo2Code, a novel framework that generates robot task code from demonstrations via an extended chain-of-thought and defines a common latent specification to connect the two. Our framework employs a robust two-stage process: (1) a recursive summarization technique that condenses demonstrations into concise specifications, and (2) a code synthesis approach that expands each function recursively from the generated specifications. We conduct extensive evaluation on various robot task benchmarks, including a novel game benchmark Robotouille, designed to simulate diverse cooking tasks in a kitchen environment. The project's website is available at https://portal-cornell.github.io/demo2code/

Contextual embeddings represent chunks of a document with respect to the document's global context. These models are typically trained and evaluated under the assumption that a relevant document contains only a single relevant chunk. In this work, we argue that in real-world use cases a retriever should not only find answers spread over several chunks but also surface the evidence needed to verify them. To address this, we introduce pplx-embed-v2-context, a family of contextual embedding models trained by distilling graded chunk-level relevance from a query-aware context compression model. This removes the need for gold-chunk labels and makes the training targets independent of the chunking. We utilize a vision-language backbone for training and release pplx-embed-v2-context in 9B and 0.6B sizes with compatible embedding spaces. On the evaluation side, we introduce two benchmarks that label both the chunks that answer a query and the evidence needed to verify the answer. Context-bench is a controlled diagnostic, and Q2D-Chunk is built from real-world search queries. To encourage further research, we also publish Q2D-Chunk as a public leaderboard. Our 9B model sets a new state of the art on both benchmarks and ConTEB. We find that the visual retrieval capabilities of our 9B model transfer from its vision-language base model and propose to extend chunking to image inputs. We demonstrate that our models achieve state-of-the-art performance among dense retrievers on visual ViDoRe-V3 and that performance improves with granular image chunking.

Transformer-based large models excel in natural language processing and computer vision, but face severe computational inefficiencies due to the self-attention's quadratic complexity with input tokens. Recently, researchers have proposed a series of methods based on block selection and compression to alleviate this problem, but they either have issues with semantic incompleteness or poor training-inference efficiency. To comprehensively address these challenges, we propose ChunkLLM, a lightweight and pluggable training framework. Specifically, we introduce two components: QK Adapter (Q-Adapter and K-Adapter) and Chunk Adapter. The former is attached to each Transformer layer, serving dual purposes of feature compression and chunk attention acquisition. The latter operates at the bottommost layer of the model, functioning to detect chunk boundaries by leveraging contextual semantic information. During the training phase, the parameters of the backbone remain frozen, with only the QK Adapter and Chunk Adapter undergoing training. Notably, we design an attention distillation method for training the QK Adapter, which enhances the recall rate of key chunks. During the inference phase, chunk selection is triggered exclusively when the current token is detected as a chunk boundary, thereby accelerating model inference. Experimental evaluations are conducted on a diverse set of long-text and short-text benchmark datasets spanning multiple tasks. ChunkLLM not only attains comparable performance on short-text benchmarks but also maintains 98.64% of the performance on long-context benchmarks while preserving a 48.58% key-value cache retention rate. Particularly, ChunkLLM attains a maximum speedup of 4.48x in comparison to the vanilla Transformer in the processing of 120K long texts.

Large Language Models (LLMs) have demonstrated remarkable generation capabilities but often struggle to access up-to-date information, which can lead to hallucinations. Retrieval-Augmented Generation (RAG) addresses this issue by incorporating knowledge from external databases, enabling more accurate and relevant responses. Due to the context window constraints of LLMs, it is impractical to input the entire external database context directly into the model. Instead, only the most relevant information, referred to as chunks, is selectively retrieved. However, current RAG research faces three key challenges. First, existing solutions often select each chunk independently, overlooking potential correlations among them. Second, in practice the utility of chunks is non-monotonic, meaning that adding more chunks can decrease overall utility. Traditional methods emphasize maximizing the number of included chunks, which can inadvertently compromise performance. Third, each type of user query possesses unique characteristics that require tailored handling, an aspect that current approaches do not fully consider. To overcome these challenges, we propose a cost constrained retrieval optimization system CORAG for retrieval-augmented generation. We employ a Monte Carlo Tree Search (MCTS) based policy framework to find optimal chunk combinations sequentially, allowing for a comprehensive consideration of correlations among chunks. Additionally, rather than viewing budget exhaustion as a termination condition, we integrate budget constraints into the optimization of chunk combinations, effectively addressing the non-monotonicity of chunk utility.

Retrieval-augmented generation systems increasingly rely on document-structure treatments: structure-aligned chunking, LLM-generated chunk contexts, heading-path metadata, and hierarchical two-stage retrieval. Separate studies support each on different corpora, embedders, and metrics, and none control for a shared confound: any text prepended to a chunk perturbs its embedding. We present a mechanism-isolating ablation testing all four treatments under one protocol, matching chunk sizes across conditions and adding a semantically null placebo---heading paths that are structurally valid but shuffled across documents. We score retrieval with a coverage-aware nDCG and test four pre-registered contrasts via document-clustered bootstrap with Holm correction, on two distant corpora: 200 Wikipedia Featured Articles (951 queries) and 1,585 QASPER papers (4,303 questions). Organization helps, and the cause is content, not tokens: structure-aligned chunks with real heading paths beat contextualized fixed windows (+0.022 / +0.012 cov-nDCG@10) and the placebo (+0.010 / +0.016). Naive two-stage hierarchical retrieval hurts (-0.033 / -0.015), traceable to first-stage section recall. Gold structure beats LLM-induced structure on Wikipedia but not on QASPER. Effects are small (dz 0.06-0.11) but Holm-significant and consistent across corpora.

Advanced large language models (LLMs) with long context windows can substantially reduce input truncation in document-level machine translation (DocMT). However, direct Doc2Doc translation remains prone to n-gram repetition and progressive quality degradation. A common remedy is to segment the document into finer-grained chunks. Nonetheless, conventional rule-based chunking approaches fail to handle the length distribution mismatch between training and inference. To address this, we introduce Fixed-Range Chunking (FRC), utilizing dynamic programming to partition documents into chunks within a predefined length interval. By consistently applying FRC during training and inference, the input documents of any length are mapped to the same length distribution, substantially reducing train-test length mismatch. Centered on FRC, we propose a lightweight dual-boundary matching algorithm for chunk alignment, alongside four distinct training strategies. Experimental results show that FRC-based fine-tuning substantially improves 7B LLMs over direct Doc2Doc fine-tuning and outperforms existing DocMT methods on IWSLT2017. We further construct GlobVDoc, a 10-language test set independent of mainstream DocMT training sources, and show that FRC improves out-of-distribution document translation.

The core challenge for streaming video generation is maintaining the content consistency in long context, which poses high requirement for the memory design. Most existing solutions maintain the memory by compressing historical frames with predefined strategies. However, different to-generate video chunks should refer to different historical cues, which is hard to satisfy with fixed strategies. In this work, we propose MemFlow to address this problem. Specifically, before generating the coming chunk, we dynamically update the memory bank by retrieving the most relevant historical frames with the text prompt of this chunk. This design enables narrative coherence even if new event happens or scenario switches in future frames. In addition, during generation, we only activate the most relevant tokens in the memory bank for each query in the attention layers, which effectively guarantees the generation efficiency. In this way, MemFlow achieves outstanding long-context consistency with negligible computation burden (7.9% speed reduction compared with the memory-free baseline) and keeps the compatibility with any streaming video generation model with KV cache.

Generative video models achieve high visual fidelity but often violate basic physical principles, limiting reliability in real-world settings. Prior attempts to inject physics rely on conditioning: frame-level signals are domain-specific and short-horizon, while global text prompts are coarse and noisy, missing fine-grained dynamics. We present PhysVid, a physics-aware local conditioning scheme that operates over temporally contiguous chunks of frames. Each chunk is annotated with physics-grounded descriptions of states, interactions, and constraints, which are fused with the global prompt via chunk-aware cross-attention during training. At inference, we introduce negative physics prompts (descriptions of locally relevant law violations) to steer generation away from implausible trajectories. On VideoPhy, PhysVid improves physical commonsense scores by approx 33% over baseline video generators, and by up to approx 8% on VideoPhy2. These results show that local, physics-aware guidance substantially increases physical plausibility in generative video and marks a step toward physics-grounded video models.

The effectiveness of Retrieval-Augmented Generation (RAG) is highly dependent on how documents are chunked, that is, segmented into smaller units for indexing and retrieval. Yet, commonly used "one-size-fits-all" approaches often fail to capture the nuanced structure and semantics of diverse texts. Despite its central role, chunking lacks a dedicated evaluation framework, making it difficult to assess and compare strategies independently of downstream performance. We challenge this paradigm by introducing Adaptive Chunking, a framework that selects the most suitable chunking strategy for each document based on a set of five novel intrinsic, document-based metrics: References Completeness (RC), Intrachunk Cohesion (ICC), Document Contextual Coherence (DCC), Block Integrity (BI), and Size Compliance (SC), which directly assess chunking quality across key dimensions. To support this framework, we also introduce two new chunkers, an LLM-regex splitter and a split-then-merge recursive splitter, alongside targeted post-processing techniques. On a diverse corpus spanning legal, technical, and social science domains, our metric-guided adaptive method significantly improves downstream RAG performance. Without changing models or prompts, our framework increases RAG outcomes, raising answers correctness to 72% (from 62-64%) and increasing the number of successfully answered questions by over 30% (65 vs. 49). These results demonstrate that adaptive, document-aware chunking, guided by a complementary suite of intrinsic metrics, offers a practical and effective path to more robust RAG systems. Code available at https://github.com/ekimetrics/adaptive-chunking.

With the goal of understanding the visual concepts that CLIP associates with text prompts, we show that the latent space of CLIP can be visualized solely in terms of linear transformations on simple geometric primitives like circles and straight lines. Although existing approaches achieve this by sketch-synthesis-through-optimization, they do so on the space of B\'ezier curves, which exhibit a wastefully large set of structures that they can evolve into, as most of them are non-essential for generating meaningful sketches. We present CLIPDrawX, an algorithm that provides significantly better visualizations for CLIP text embeddings, using only simple primitive shapes like straight lines and circles. This constrains the set of possible outputs to linear transformations on these primitives, thereby exhibiting an inherently simpler mathematical form. The synthesis process of CLIPDrawX can be tracked end-to-end, with each visual concept being explained exclusively in terms of primitives. Implementation will be released upon acceptance. Project Page: https://clipdrawx.github.io/{https://clipdrawx.github.io/}.

LLMs can now act as autonomous agents that interact with digital environments and complete specific objectives (e.g., arranging an online meeting). However, accuracy is still far from satisfactory, partly due to a lack of large-scale, direct demonstrations for digital tasks. Obtaining supervised data from humans is costly, and automatic data collection through exploration or reinforcement learning relies on complex environmental and content setup, resulting in datasets that lack comprehensive coverage of various scenarios. On the other hand, there is abundant knowledge that may indirectly assist task completion, such as online tutorials that were created for human consumption. In this work, we present Synatra, an approach that effectively transforms this indirect knowledge into direct supervision at scale. We define different types of indirect knowledge, and carefully study the available sources to obtain it, methods to encode the structure of direct demonstrations, and finally methods to transform indirect knowledge into direct demonstrations. We use 100k such synthetically-created demonstrations to finetune a 7B CodeLlama, and demonstrate that the resulting agent surpasses all comparably sized models on three web-based task benchmarks Mind2Web, MiniWoB++ and WebArena, as well as surpassing GPT-3.5 on WebArena and Mind2Web. In addition, while synthetic demonstrations prove to be only 3% the cost of human demonstrations (at $0.031 each), we show that the synthetic demonstrations can be more effective than an identical number of human demonstrations collected from limited domains.

Recent progress in large-scale generative models has substantially advanced video generation, yet existing methods remain constrained by a rigid inference paradigm. Bidirectional diffusion models excel at global coherence and visual fidelity but suffer from slow inference, while autoregressive models offer efficient and streaming generation at the cost of long-range consistency and exposure bias. We introduce Flex-Forcing, a unified training and inference framework that enables a video diffusion model to seamlessly operate under both bidirectional and autoregressive generation regimes. The core idea is a flexible chunking mechanism jointly defined over the temporal axis and denoising steps. This design allows the model to (1) perform flexible chunking according to different device budgets, (2) perform bidirectional inference across chunks for global structure planning, while generating frames autoregressively within each chunk for efficient and fine-grained synthesis, and (3) perform any-order, any-timestep autoregressive generation without the strict causal constraint. Extensive experiments on multiple video generation benchmarks demonstrate that Flex-Forcing achieves consistently better video quality, long-video stability than strong baselines with a rigid inference schedule, while offering faster inference.

The advancement of Large Language Models(LLMs) has brought substantial attention to the Chain of Thought(CoT) approach, primarily due to its ability to enhance the capability of LLMs on tasks requiring complex reasoning. Moreover, the significance of CoT approaches extends to the application of LLMs for multi-modal tasks, such as multi-modal question answering. However, the selection of optimal CoT demonstration examples in multi-modal reasoning for LLMs remains less explored for LLMs due to the inherent complexity of multi-modal examples. In this paper, we introduce a novel approach that addresses this challenge by using retrieval mechanisms to dynamically and automatically select demonstration examples based on cross-modal similarities. This method aims to refine the CoT reasoning process in multi-modal scenarios via informing LLMs with more relevant and informative examples. Furthermore, we employ a stratified sampling method categorising demonstration examples into groups based on their types and retrieving examples from different groups respectively to promote the diversity of demonstration examples. Through a series of experiments, we demonstrate that our approach significantly improves the performance of LLMs, achieving state-of-the-art results in multi-modal reasoning tasks. Specifically, our methods demonstrate significant advancements on the ScienceQA dataset. While our method based on ChatGPT outperforms the Chameleon(ChatGPT) by 2.74% with an accuracy of 82.67%, the GPT4-based approach surpasses the Chameleon(GPT-4) by 0.89%, achieving 87.43% on accuracy under the same setting. Moreover, our best performing show a 6.05% increase over Chameleon for ChatGPT-based models and a 4.57% increase for GPT-4-based models.

Large Chunk Test-Time Training (LaCT) has shown strong performance on long-context 3D reconstruction, but its fully plastic inference-time updates remain vulnerable to catastrophic forgetting and overfitting. As a result, LaCT is typically instantiated with a single large chunk spanning the full input sequence, falling short of the broader goal of handling arbitrarily long sequences in a single pass. We propose Elastic Test-Time Training inspired by elastic weight consolidation, that stabilizes LaCT fast-weight updates with a Fisher-weighted elastic prior around a maintained anchor state. The anchor evolves as an exponential moving average of past fast weights to balance stability and plasticity. Based on this updated architecture, we introduce Fast Spatial Memory (FSM), an efficient and scalable model for 4D reconstruction that learns spatiotemporal representations from long observation sequences and renders novel view-time combinations. We pre-trained FSM on large-scale curated 3D/4D data to capture the dynamics and semantics of complex spatial environments. Extensive experiments show that FSM supports fast adaptation over long sequences and delivers high-quality 3D/4D reconstruction with smaller chunks and mitigating the camera-interpolation shortcut. Overall, we hope to advance LaCT beyond the bounded single-chunk setting toward robust multi-chunk adaptation, a necessary step for generalization to genuinely longer sequences, while substantially alleviating the activation-memory bottleneck.

Teaching robots new skills quickly and conveniently is crucial for the broader adoption of robotic systems. In this work, we address the problem of one-shot imitation from a single human demonstration, given by an RGB-D video recording through a two-stage process. In the first stage which is offline, we extract the trajectory of the demonstration. This entails segmenting manipulated objects and determining their relative motion in relation to secondary objects such as containers. Subsequently, in the live online trajectory generation stage, we first re-detect all objects, then we warp the demonstration trajectory to the current scene, and finally, we trace the trajectory with the robot. To complete these steps, our method makes leverages several ancillary models, including those for segmentation, relative object pose estimation, and grasp prediction. We systematically evaluate different combinations of correspondence and re-detection methods to validate our design decision across a diverse range of tasks. Specifically, we collect demonstrations of ten different tasks including pick-and-place tasks as well as articulated object manipulation. Finally, we perform extensive evaluations on a real robot system to demonstrate the effectiveness and utility of our approach in real-world scenarios. We make the code publicly available at http://ditto.cs.uni-freiburg.de.

Real-time streaming joint audio-video generation for character animation requires a generator to speak the requested transcript, maintain visual identity across chunks, and run within a strict playback budget. These requirements are difficult to satisfy simultaneously: chunk-wise autoregressive generation can accumulate transcript-audio misalignment and visual drift, while the few-step distillation needed for low latency often degrades spatial diversity and temporal quality. We present StreamChar, a streaming framework that separates long-horizon orchestration from short-window audio-video denoising. An LLM-based orchestrator uses the transcript and historical context to produce frame-aligned audio conditions, and a joint audio-video DiT performs local bidirectional denoising with reference and motion-frame conditioning. For efficient deployment, we use a two-stage distillation pipeline that first compresses the sampler and then fine-tunes the student under online chunk rollouts. A progress-aware pointer aligns partial transcripts with generated audio during rollout training, and a sink-chunk memory provides a persistent visual anchor for reducing long-horizon drift. Experiments on short-clip and long-horizon protocols show that StreamChar runs in real time on a single H100 GPU and provides a favorable system-level trade-off among transcript fidelity, audio-visual synchronization, visual quality, and streaming stability compared with recent joint and audio-driven baselines.

Action chunking improves the performance of policies learned by behavioural cloning, and several mechanisms have been proposed to explain why, including temporal consistency, horizon reduction, representation learning, and reduced error compounding. We instead study what happens to an action error once it enters the system. At each state, we inject a small action error and measure how fast it grows or shrinks under two execution regimes: open-loop, where the rest of the chunk is replayed without replanning, and closed-loop, where the policy replans after the perturbation. The fitted rate labels each state as contracting, expanding, or unresolved. Across twelve manipulation tasks from three benchmark suites, we find that confidently stable states are rare, while error amplification is common among states whose propagation rate can be resolved. We further find that the measured propagation rate depends strongly on the fitting horizon: amplification is typically front-loaded, so short windows can overestimate longer-horizon propagation. Finally, we train predictors on these labels and find that a state's open-loop regime can be recovered from camera frames and proprioception alone, while its closed-loop propagation is only partially recoverable because it also depends on how the policy acts after the perturbation. These results suggest that error-compounding arguments alone do not provide a complete account of action chunking: neither passive open-loop dynamics nor policy replanning consistently contracts an injected error, and replanning rarely turns open-loop amplification into confident contraction. This suggests that closed-loop reactivity should be trained explicitly, using perturbation- and tree-coverage-oriented training to expose policies to deviations they must recover from, rather than expected to emerge reliably from standard imitation learning.

Science experiment videos demonstrate how experiments are performed, but offer no direct interaction for learners. Turning them into virtual experiments requires not only reproducing the observed apparatus and state changes, but also enforcing the preconditions governing each operation. We introduce Lab2Sim, a benchmark of 218 science experiment videos with evidence-grounded specifications and 11,881 rubric items. To address this task, we propose EduVideo2Code, which extracts experimental procedures hierarchically, encodes them as explicit state machines to guide code generation, and refines the resulting pages through execution-based verification. Experiments show that existing multimodal models readily generate runnable pages but struggle to faithfully reconstruct experimental apparatus. EduVideo2Code consistently improves all four evaluation dimensions across two backbone models, with apparatus fidelity gains of 24.15 points.

Existing reinforcement learning (RL) methods struggle with long-horizon robotic manipulation tasks, particularly those involving sparse rewards. While action chunking is a promising paradigm for robotic manipulation, using RL to directly learn continuous action chunks in a stable and data-efficient manner remains a critical challenge. This paper introduces AC3 (Actor-Critic for Continuous Chunks), a novel RL framework that learns to generate high-dimensional, continuous action sequences. To make this learning process stable and data-efficient, AC3 incorporates targeted stabilization mechanisms for both the actor and the critic. First, to ensure reliable policy improvement, the actor is trained with an asymmetric update rule, learning exclusively from successful trajectories. Second, to enable effective value learning despite sparse rewards, the critic's update is stabilized using intra-chunk n-step returns and further enriched by a self-supervised module providing intrinsic rewards at anchor points aligned with each action chunk. We conducted extensive experiments on 25 tasks from the BiGym and RLBench benchmarks. Results show that by using only a few demonstrations and a simple model architecture, AC3 achieves superior success rates on most tasks, validating its effective design.

Text-to-video generation has advanced significantly over the past five years through scaling of model size, data, and compute. Unlike model architecture, training data is often underexplored. Real-world data curation is complex and non-trivial, involving clip selection from raw videos and captioning to create video-text pairs for learning text-to-video mappings. We study how data distribution and caption quality impact text-to-video models. To enable controlled experiments, we introduce Moving Alphabet, a procedural testbed that renders letters with varying fonts, colors, sizes, and positions, moving in different directions and speeds against a black background. This design allows precise control over data distribution and caption quality by corrupting ground-truth metadata. Our experiments yield three findings: a) a diverse and balanced distribution of video content and duration is critical for generalization; b) caption quality significantly affects both model performance and training efficiency, suggesting that text-to-video models are bounded by video understanding capabilities; and c) classifier-free guidance and fine-tuning on high-quality data provide partial recovery from models trained on corrupted captions, but cannot fully compensate for poor pre-training data. We believe these insights can inform the development of large-scale text-to-video models, and we advocate for greater attention to the science of pre-training data.

Automatic presentation slide generation can greatly streamline content creation. However, since preferences of each user may vary, existing under-specified formulations often lead to suboptimal results that fail to align with individual user needs. We introduce a novel task that conditions paper-to-slides generation on user-specified preferences. We propose a human behavior-inspired agentic framework, SlideTailor, that progressively generates editable slides in a user-aligned manner. Instead of requiring users to write their preferences in detailed textual form, our system only asks for a paper-slides example pair and a visual template - natural and easy-to-provide artifacts that implicitly encode rich user preferences across content and visual style. Despite the implicit and unlabeled nature of these inputs, our framework effectively distills and generalizes the preferences to guide customized slide generation. We also introduce a novel chain-of-speech mechanism to align slide content with planned oral narration. Such a design significantly enhances the quality of generated slides and enables downstream applications like video presentations. To support this new task, we construct a benchmark dataset that captures diverse user preferences, with carefully designed interpretable metrics for robust evaluation. Extensive experiments demonstrate the effectiveness of our framework.

Retrieval-Augmented Generation (RAG) systems have revolutionized information retrieval and question answering, but traditional text-based chunking methods struggle with complex document structures, multi-page tables, embedded figures, and contextual dependencies across page boundaries. We present a novel multimodal document chunking approach that leverages Large Multimodal Models (LMMs) to process PDF documents in batches while maintaining semantic coherence and structural integrity. Our method processes documents in configurable page batches with cross-batch context preservation, enabling accurate handling of tables spanning multiple pages, embedded visual elements, and procedural content. We evaluate our approach on a curated dataset of PDF documents with manually crafted queries, demonstrating improvements in chunk quality and downstream RAG performance. Our vision-guided approach achieves better accuracy compared to traditional vanilla RAG systems, with qualitative analysis showing superior preservation of document structure and semantic coherence.

A limitation of modern document retrieval embedding methods is that they typically encode passages (chunks) from the same documents independently, often overlooking crucial contextual information from the rest of the document that could greatly improve individual chunk representations. In this work, we introduce ConTEB (Context-aware Text Embedding Benchmark), a benchmark designed to evaluate retrieval models on their ability to leverage document-wide context. Our results show that state-of-the-art embedding models struggle in retrieval scenarios where context is required. To address this limitation, we propose InSeNT (In-sequence Negative Training), a novel contrastive post-training approach which combined with late chunking pooling enhances contextual representation learning while preserving computational efficiency. Our method significantly improves retrieval quality on ConTEB without sacrificing base model performance. We further find chunks embedded with our method are more robust to suboptimal chunking strategies and larger retrieval corpus sizes. We open-source all artifacts at https://github.com/illuin-tech/contextual-embeddings.

In Retrieval-Augmented Generation applications, the Information Retrieval part is central as it provides the contextual information that enables a Large Language Model to generate an appropriate and truthful response. High quality parsing and chunking are critical as efficient data segmentation directly impacts downstream tasks, i.e. Information Retrieval and answer generation. In this paper, we introduce ChunkNorris, a novel heuristic-based technique designed to optimise the parsing and chunking of PDF documents. Our approach does not rely on machine learning and employs a suite of simple yet effective heuristics to achieve high performance with minimal computational overhead. We demonstrate the efficiency of ChunkNorris through a comprehensive benchmark against existing parsing and chunking methods, evaluating criteria such as execution time, energy consumption, and retrieval accuracy. We propose an open-access dataset to produce our results. ChunkNorris outperforms baseline and more advanced techniques, offering a practical and efficient alternative for Information Retrieval tasks. Therefore, this research highlights the potential of heuristic-based methods for real-world, resource-constrained RAG use cases.

Cooking is a sequential and visually grounded activity, where each step such as chopping, mixing, or frying carries both procedural logic and visual semantics. While recent diffusion models have shown strong capabilities in text-to-image generation, they struggle to handle structured multi-step scenarios like recipe illustration. Additionally, current recipe illustration methods are unable to adjust to the natural variability in recipe length, generating a fixed number of images regardless of the actual instructions structure. To address these limitations, we present CookAnything, a flexible and consistent diffusion-based framework that generates coherent, semantically distinct image sequences from textual cooking instructions of arbitrary length. The framework introduces three key components: (1) Step-wise Regional Control (SRC), which aligns textual steps with corresponding image regions within a single denoising process; (2) Flexible RoPE, a step-aware positional encoding mechanism that enhances both temporal coherence and spatial diversity; and (3) Cross-Step Consistency Control (CSCC), which maintains fine-grained ingredient consistency across steps. Experimental results on recipe illustration benchmarks show that CookAnything performs better than existing methods in training-based and training-free settings. The proposed framework supports scalable, high-quality visual synthesis of complex multi-step instructions and holds significant potential for broad applications in instructional media, and procedural content creation.

We present PresentAgent, a multimodal agent that transforms long-form documents into narrated presentation videos. While existing approaches are limited to generating static slides or text summaries, our method advances beyond these limitations by producing fully synchronized visual and spoken content that closely mimics human-style presentations. To achieve this integration, PresentAgent employs a modular pipeline that systematically segments the input document, plans and renders slide-style visual frames, generates contextual spoken narration with large language models and Text-to-Speech models, and seamlessly composes the final video with precise audio-visual alignment. Given the complexity of evaluating such multimodal outputs, we introduce PresentEval, a unified assessment framework powered by Vision-Language Models that comprehensively scores videos across three critical dimensions: content fidelity, visual clarity, and audience comprehension through prompt-based evaluation. Our experimental validation on a curated dataset of 30 document-presentation pairs demonstrates that PresentAgent approaches human-level quality across all evaluation metrics. These results highlight the significant potential of controllable multimodal agents in transforming static textual materials into dynamic, effective, and accessible presentation formats. Code will be available at https://github.com/AIGeeksGroup/PresentAgent.

Text-to-video diffusion models enable the generation of high-quality videos that follow text instructions, making it easy to create diverse and individual content. However, existing approaches mostly focus on high-quality short video generation (typically 16 or 24 frames), ending up with hard-cuts when naively extended to the case of long video synthesis. To overcome these limitations, we introduce StreamingT2V, an autoregressive approach for long video generation of 80, 240, 600, 1200 or more frames with smooth transitions. The key components are:(i) a short-term memory block called conditional attention module (CAM), which conditions the current generation on the features extracted from the previous chunk via an attentional mechanism, leading to consistent chunk transitions, (ii) a long-term memory block called appearance preservation module, which extracts high-level scene and object features from the first video chunk to prevent the model from forgetting the initial scene, and (iii) a randomized blending approach that enables to apply a video enhancer autoregressively for infinitely long videos without inconsistencies between chunks. Experiments show that StreamingT2V generates high motion amount. In contrast, all competing image-to-video methods are prone to video stagnation when applied naively in an autoregressive manner. Thus, we propose with StreamingT2V a high-quality seamless text-to-long video generator that outperforms competitors with consistency and motion. Our code will be available at: https://github.com/Picsart-AI-Research/StreamingT2V

This paper aims to generate materials for 3D meshes from text descriptions. Unlike existing methods that synthesize texture maps, we propose to generate segment-wise procedural material graphs as the appearance representation, which supports high-quality rendering and provides substantial flexibility in editing. Instead of relying on extensive paired data, i.e., 3D meshes with material graphs and corresponding text descriptions, to train a material graph generative model, we propose to leverage the pre-trained 2D diffusion model as a bridge to connect the text and material graphs. Specifically, our approach decomposes a shape into a set of segments and designs a segment-controlled diffusion model to synthesize 2D images that are aligned with mesh parts. Based on generated images, we initialize parameters of material graphs and fine-tune them through the differentiable rendering module to produce materials in accordance with the textual description. Extensive experiments demonstrate the superior performance of our framework in photorealism, resolution, and editability over existing methods. Project page: https://zhanghe3z.github.io/MaPa/

Real-time chunking (RTC) enables vision-language-action models (VLAs) to generate smooth, reactive robot trajectories by asynchronously predicting action chunks and conditioning on previously committed actions via inference-time inpainting. However, this inpainting method introduces computational overhead that increases inference latency. In this work, we propose a simple alternative: simulating inference delay at training time and conditioning on action prefixes directly, eliminating any inference-time overhead. Our method requires no modifications to the model architecture or robot runtime, and can be implemented with only a few additional lines of code. In simulated experiments, we find that training-time RTC outperforms inference-time RTC at higher inference delays. In real-world experiments on box building and espresso making tasks with the π_{0.6} VLA, we demonstrate that training-time RTC maintains both task performance and speed parity with inference-time RTC while being computationally cheaper. Our results suggest that training-time action conditioning is a practical drop-in replacement for inference-time inpainting in real-time robot control.

Customizing image generation remains a core challenge in controllable image synthesis. For single-concept generation, maintaining both identity preservation and prompt alignment is challenging. In multi-concept scenarios, relying solely on a prompt without additional conditions like layout boxes or semantic masks, often leads to identity loss and concept omission. In this paper, we introduce ShowFlow, a comprehensive framework designed to tackle these challenges. We propose ShowFlow-S for single-concept image generation, and ShowFlow-M for handling multiple concepts. ShowFlow-S introduces a KronA-WED adapter, which integrates a Kronecker adapter with weight and embedding decomposition, and employs a disentangled learning approach with a novel attention regularization objective to enhance single-concept generation. Building on this foundation, ShowFlow-M directly reuses the learned models from ShowFlow-S to support multi-concept generation without extra conditions, incorporating a Subject-Adaptive Matching Attention (SAMA) and a layout consistency strategy as the plug-and-play module. Extensive experiments and user studies validate ShowFlow's effectiveness, highlighting its potential in real-world applications like advertising and virtual dressing.

In this paper we present an approach for localizing steps of procedural activities in narrated how-to videos. To deal with the scarcity of labeled data at scale, we source the step descriptions from a language knowledge base (wikiHow) containing instructional articles for a large variety of procedural tasks. Without any form of manual supervision, our model learns to temporally ground the steps of procedural articles in how-to videos by matching three modalities: frames, narrations, and step descriptions. Specifically, our method aligns steps to video by fusing information from two distinct pathways: i) {\em direct} alignment of step descriptions to frames, ii) {\em indirect} alignment obtained by composing steps-to-narrations with narrations-to-video correspondences. Notably, our approach performs global temporal grounding of all steps in an article at once by exploiting order information, and is trained with step pseudo-labels which are iteratively refined and aggressively filtered. In order to validate our model we introduce a new evaluation benchmark -- HT-Step -- obtained by manually annotating a 124-hour subset of HowTo100MA test server is accessible at \url{https://eval.ai/web/challenges/challenge-page/2082.} with steps sourced from wikiHow articles. Experiments on this benchmark as well as zero-shot evaluations on CrossTask demonstrate that our multi-modality alignment yields dramatic gains over several baselines and prior works. Finally, we show that our inner module for matching narration-to-video outperforms by a large margin the state of the art on the HTM-Align narration-video alignment benchmark.

Real-world document question answering is challenging. Analysts must synthesize evidence across multiple documents and different parts of each document. However, any fixed LLM context window can be exceeded as document collections grow. A common workaround is to decompose documents into chunks and assemble answers from chunk-level outputs, but this introduces an aggregation bottleneck: as the number of chunks grows, systems must still combine and reason over an increasingly large body of extracted evidence. We present SLIDERS, a framework for question answering over long document collections through structured reasoning. SLIDERS extracts salient information into a relational database, enabling scalable reasoning over persistent structured state via SQL rather than concatenated text. To make this locally extracted representation globally coherent, SLIDERS introduces a data reconciliation stage that leverages provenance, extraction rationales, and metadata to detect and repair duplicated, inconsistent, and incomplete records. SLIDERS outperforms all baselines on three existing long-context benchmarks, despite all of them fitting within the context window of strong base LLMs, exceeding GPT-4.1 by 6.6 points on average. It also improves over the next best baseline by ~19 and ~32 points on two new benchmarks at 3.9M and 36M tokens, respectively.

Dense retrieval is commonly evaluated on benchmarks that represent each document with a single embedding, even though real-world retrieval systems often index long documents that require chunking. In these settings, the chosen chunking method not only affects retrieval quality, but also indexing throughput, query latency, and memory usage. Prior comparisons of chunking strategies have mainly focused on retrieval performance, leaving operational trade-offs underexplored. To address these issues, we evaluate eight representative chunking strategies across two scalable corpora, three embedding models, and multiple corpus sizes, measuring both retrieval effectiveness and system-level costs. Our results show that computationally expensive methods rarely provide consistent gains over simpler chunking. Instead, the best performing strategy depends on the embedding model, dataset, corpus size, and target retrieval metric. Methods with similar performance can also differ substantially in operational cost, showing that chunking should be seen as a multi-objective design decision.

Over the last decade, online lecture videos have become increasingly popular and have experienced a meteoric rise during the pandemic. However, video-language research has primarily focused on instructional videos or movies, and tools to help students navigate the growing online lectures are lacking. Our first contribution is to facilitate research in the educational domain, by introducing AVLectures, a large-scale dataset consisting of 86 courses with over 2,350 lectures covering various STEM subjects. Each course contains video lectures, transcripts, OCR outputs for lecture frames, and optionally lecture notes, slides, assignments, and related educational content that can inspire a variety of tasks. Our second contribution is introducing video lecture segmentation that splits lectures into bite-sized topics that show promise in improving learner engagement. We formulate lecture segmentation as an unsupervised task that leverages visual, textual, and OCR cues from the lecture, while clip representations are fine-tuned on a pretext self-supervised task of matching the narration with the temporally aligned visual content. We use these representations to generate segments using a temporally consistent 1-nearest neighbor algorithm, TW-FINCH. We evaluate our method on 15 courses and compare it against various visual and textual baselines, outperforming all of them. Our comprehensive ablation studies also identify the key factors driving the success of our approach.

Text- or image-to-3D generators and 3D scanners can now produce 3D assets with high-quality shapes and textures. These assets typically consist of a single, fused representation, like an implicit neural field, a Gaussian mixture, or a mesh, without any useful structure. However, most applications and creative workflows require assets to be made of several meaningful parts that can be manipulated independently. To address this gap, we introduce PartGen, a novel approach that generates 3D objects composed of meaningful parts starting from text, an image, or an unstructured 3D object. First, given multiple views of a 3D object, generated or rendered, a multi-view diffusion model extracts a set of plausible and view-consistent part segmentations, dividing the object into parts. Then, a second multi-view diffusion model takes each part separately, fills in the occlusions, and uses those completed views for 3D reconstruction by feeding them to a 3D reconstruction network. This completion process considers the context of the entire object to ensure that the parts integrate cohesively. The generative completion model can make up for the information missing due to occlusions; in extreme cases, it can hallucinate entirely invisible parts based on the input 3D asset. We evaluate our method on generated and real 3D assets and show that it outperforms segmentation and part-extraction baselines by a large margin. We also showcase downstream applications such as 3D part editing.

Recent advancements in imitation learning have shown promising results in robotic manipulation, driven by the availability of high-quality training data. To improve data collection efficiency, some approaches focus on developing specialized teleoperation devices for robot control, while others directly use human hand demonstrations to obtain training data. However, the former requires both a robotic system and a skilled operator, limiting scalability, while the latter faces challenges in aligning the visual gap between human hand demonstrations and the deployed robot observations. To address this, we propose a human hand data collection system combined with our hand-to-gripper generative model, which translates human hand demonstrations into robot gripper demonstrations, effectively bridging the observation gap. Specifically, a GoPro fisheye camera is mounted on the human wrist to capture human hand demonstrations. We then train a generative model on a self-collected dataset of paired human hand and UMI gripper demonstrations, which have been processed using a tailored data pre-processing strategy to ensure alignment in both timestamps and observations. Therefore, given only human hand demonstrations, we are able to automatically extract the corresponding SE(3) actions and integrate them with high-quality generated robot demonstrations through our generation pipeline for training robotic policy model. In experiments, the robust manipulation performance demonstrates not only the quality of the generated robot demonstrations but also the efficiency and practicality of our data collection method. More demonstrations can be found at: https://rwor.github.io/

We introduce WonderJourney, a modularized framework for perpetual 3D scene generation. Unlike prior work on view generation that focuses on a single type of scenes, we start at any user-provided location (by a text description or an image) and generate a journey through a long sequence of diverse yet coherently connected 3D scenes. We leverage an LLM to generate textual descriptions of the scenes in this journey, a text-driven point cloud generation pipeline to make a compelling and coherent sequence of 3D scenes, and a large VLM to verify the generated scenes. We show compelling, diverse visual results across various scene types and styles, forming imaginary "wonderjourneys". Project website: https://kovenyu.com/WonderJourney/

We introduce a method to generate 3D scenes that are disentangled into their component objects. This disentanglement is unsupervised, relying only on the knowledge of a large pretrained text-to-image model. Our key insight is that objects can be discovered by finding parts of a 3D scene that, when rearranged spatially, still produce valid configurations of the same scene. Concretely, our method jointly optimizes multiple NeRFs from scratch - each representing its own object - along with a set of layouts that composite these objects into scenes. We then encourage these composited scenes to be in-distribution according to the image generator. We show that despite its simplicity, our approach successfully generates 3D scenes decomposed into individual objects, enabling new capabilities in text-to-3D content creation. For results and an interactive demo, see our project page at https://dave.ml/layoutlearning/

As humans, we aspire to create media content that is both freely willed and readily controlled. Thanks to the prominent development of generative techniques, we now can easily utilize 2D diffusion methods to synthesize images controlled by raw sketch or designated human poses, and even progressively edit/regenerate local regions with masked inpainting. However, similar workflows in 3D modeling tasks are still unavailable due to the lack of controllability and efficiency in 3D generation. In this paper, we present a novel controllable and interactive 3D assets modeling framework, named Coin3D. Coin3D allows users to control the 3D generation using a coarse geometry proxy assembled from basic shapes, and introduces an interactive generation workflow to support seamless local part editing while delivering responsive 3D object previewing within a few seconds. To this end, we develop several techniques, including the 3D adapter that applies volumetric coarse shape control to the diffusion model, proxy-bounded editing strategy for precise part editing, progressive volume cache to support responsive preview, and volume-SDS to ensure consistent mesh reconstruction. Extensive experiments of interactive generation and editing on diverse shape proxies demonstrate that our method achieves superior controllability and flexibility in the 3D assets generation task.

There has been increasing research interest in building unified multimodal understanding and generation models, among which Show-o stands as a notable representative, demonstrating great promise for both text-to-image and image-to-text generation. The inference of Show-o involves progressively denoising image tokens and autoregressively decoding text tokens, and hence, unfortunately, suffers from inefficiency issues from both sides. This paper introduces Show-o Turbo to bridge the gap. We first identify a unified denoising perspective for the generation of images and text in Show-o based on the parallel decoding of text tokens. We then propose to extend consistency distillation (CD), a qualified approach for shortening the denoising process of diffusion models, to the multimodal denoising trajectories of Show-o. We introduce a trajectory segmentation strategy and a curriculum learning procedure to improve the training convergence. Empirically, in text-to-image generation, Show-o Turbo displays a GenEval score of 0.625 at 4 sampling steps without using classifier-free guidance (CFG), outperforming that of the original Show-o with 8 steps and CFG; in image-to-text generation, Show-o Turbo exhibits a 1.5x speedup without significantly sacrificing performance. The code is available at https://github.com/zhijie-group/Show-o-Turbo.

In this paper, we push the boundaries of fine-grained 3D generation into truly creative territory. Current methods either lack intricate details or simply mimic existing objects -- we enable both. By lifting 2D fine-grained understanding into 3D through multi-view diffusion and modeling part latents as continuous distributions, we unlock the ability to generate entirely new, yet plausible parts through interpolation and sampling. A self-supervised feature consistency loss further ensures stable generation of these unseen parts. The result is the first system capable of creating novel 3D objects with species-specific details that transcend existing examples. While we demonstrate our approach on birds, the underlying framework extends beyond things that can chirp! Code will be released at https://github.com/kamwoh/chirpy3d.

Existing audio-video generation methods produce well-synchronized clips but are limited to short durations, while long-video generation methods extend duration through chunk-based iterative synthesis yet lack audio entirely. Generating long audio-video jointly is fundamentally harder than either task alone: each chunk must simultaneously maintain video temporal coherence, audio temporal coherence, and cross-modal synchronization, whose conditioning signals enter the model through different pathways. In this work, we present Encore for long-form synchronized audio-video generation. Our key insight is to factor this challenge into: (1) local continuity handled by iterative generation with explicit cross-chunk context propagation, and (2) global consistency enforced via reference audio-video signals with shifted position embedding. Building on this design, we propose Adaptive Signal Routing (ASR), which introduces learnable attention biases within self-attention and learnable residual scales on cross-attention outputs, enabling the model to adaptively modulate the influence of each conditioning signal. Trained end-to-end for joint audio-video generation, Encore also supports infinite-length audio-to-video and video-to-audio synthesis at inference by conditioning on the ground-truth modality throughout the denoising process. Experiments on our extended VerseBench for long audio-video evaluation demonstrate that Encore significantly outperforms existing methods in both generation quality and temporal coherence. Code and data for this paper are at https://github.com/shaohua-pan/Encore.

Action chunking---predicting and executing multiple actions instead of a single action---has proven to be a critical component for learning effective robotic control policies. However, our precise understanding of why action chunking improves performance has remained limited. In this work we seek to close this gap. Through rigorous experimental evaluations in both simulated and real-world settings, we show that existing hypotheses for the success of action chunking---temporal consistency, horizon reduction, and representation learning---fail to explain the success of action chunking. Instead, we find that action chunking benefits from greater non-Markovian expressivity and reduced compounding error compared to Markovian policies, but, in many settings of interest, these effects can be fully captured by delayed policies, which at each step predict a single action based on the observation k steps in the past. We then show that there exists an additional benefit of action chunking that we refer to as implicit ensembling. In particular, by learning a diversity of temporal relationships (that is, a_t | o_t, a_t | o_{t-1}, ldots), action-chunked policies exhibit behavior matching that of a model ensemble, increasing their robustness and generalization ability over policies that only learn a single temporal relationship. Building on these insights, we show that in simulated and real-world robotic control settings, we can match the performance of action chunking without action chunking---by deploying an action chunking policy as an ensemble of policies with randomized delays. Furthermore, we propose a policy class that amplifies the benefits of action chunking by explicitly instantiating an ensemble, and which we show significantly improves over the performance of action chunking in many domains.

Test-Time Training (TTT) enables long-context processing via continuous weight updates during inference, but current methods struggle to balance the expressivity of per-token update dynamics with the hardware efficiency of chunk-wise approximations. We propose E^2-TTT (Expressive and Efficient TTT) to bridge this gap. Under the standard approximation of taking gradients at the chunk-start weights, we derive a closed-form state transition that exactly reproduces the chunk-end fast-weight and momentum states of the per-token recurrence. This enables fully parallelized chunk-level training while preserving the temporal structure of the update rule that prior chunk-wise methods discard. We validate E^2-TTT by training models up to 1.3B parameters from scratch. It performs on par with previous TTT and hybrid attention baselines in language modeling while outperforming them on in-context retrieval. Its advantage is most pronounced in length extrapolation: on the standard ``Needle in a Haystack'' passkey test, it retains over 90% accuracy at 8times the training context length. Meanwhile, E^2-TTT can match the training throughput of efficient chunk-wise methods, demonstrating that it effectively reconciles expressivity with efficiency. The code is available at https://github.com/zeyun-zhong/E2-TTT.

While existing generation and unified models excel at general image generation, they struggle with tasks requiring deep reasoning, planning, and precise data-to-visual mapping abilities beyond general scenarios. To push beyond the existing limitations, we introduce a new and challenging task: creative table visualization, requiring the model to generate an infographic that faithfully and aesthetically visualizes the data from a given table. To address this challenge, we propose ShowTable, a pipeline that synergizes MLLMs with diffusion models via a progressive self-correcting process. The MLLM acts as the central orchestrator for reasoning the visual plan and judging visual errors to provide refined instructions, the diffusion execute the commands from MLLM, achieving high-fidelity results. To support this task and our pipeline, we introduce three automated data construction pipelines for training different modules. Furthermore, we introduce TableVisBench, a new benchmark with 800 challenging instances across 5 evaluation dimensions, to assess performance on this task. Experiments demonstrate that our pipeline, instantiated with different models, significantly outperforms baselines, highlighting its effective multi-modal reasoning, generation, and error correction capabilities.

This work presents CLIPDraw, an algorithm that synthesizes novel drawings based on natural language input. CLIPDraw does not require any training; rather a pre-trained CLIP language-image encoder is used as a metric for maximizing similarity between the given description and a generated drawing. Crucially, CLIPDraw operates over vector strokes rather than pixel images, a constraint that biases drawings towards simpler human-recognizable shapes. Results compare between CLIPDraw and other synthesis-through-optimization methods, as well as highlight various interesting behaviors of CLIPDraw, such as satisfying ambiguous text in multiple ways, reliably producing drawings in diverse artistic styles, and scaling from simple to complex visual representations as stroke count is increased. Code for experimenting with the method is available at: https://colab.research.google.com/github/kvfrans/clipdraw/blob/main/clipdraw.ipynb

Video-based world models hold significant potential for generating high-quality embodied manipulation data. However, current video generation methods struggle to achieve stable long-horizon generation: classical diffusion-based approaches often suffer from temporal inconsistency and visual drift over multiple rollouts, while autoregressive methods tend to compromise on visual detail. To solve this, we introduce LongScape, a hybrid framework that adaptively combines intra-chunk diffusion denoising with inter-chunk autoregressive causal generation. Our core innovation is an action-guided, variable-length chunking mechanism that partitions video based on the semantic context of robotic actions. This ensures each chunk represents a complete, coherent action, enabling the model to flexibly generate diverse dynamics. We further introduce a Context-aware Mixture-of-Experts (CMoE) framework that adaptively activates specialized experts for each chunk during generation, guaranteeing high visual quality and seamless chunk transitions. Extensive experimental results demonstrate that our method achieves stable and consistent long-horizon generation over extended rollouts. Our code is available at: https://github.com/tsinghua-fib-lab/Longscape.

Large-scale endeavors like and widespread community efforts such as Open-X-Embodiment have contributed to growing the scale of robot demonstration data. However, there is still an opportunity to improve the quality, quantity, and diversity of robot demonstration data. Although vision-language models have been shown to automatically generate demonstration data, their utility has been limited to environments with privileged state information, they require hand-designed skills, and are limited to interactions with few object instances. We propose Manipulate-Anything, a scalable automated generation method for real-world robotic manipulation. Unlike prior work, our method can operate in real-world environments without any privileged state information, hand-designed skills, and can manipulate any static object. We evaluate our method using two setups. First, Manipulate-Anything successfully generates trajectories for all 7 real-world and 14 simulation tasks, significantly outperforming existing methods like VoxPoser. Second, Manipulate-Anything's demonstrations can train more robust behavior cloning policies than training with human demonstrations, or from data generated by VoxPoser, Scaling-up, and Code-As-Policies. We believe Manipulate-Anything can be a scalable method for both generating data for robotics and solving novel tasks in a zero-shot setting. Project page: https://robot-ma.github.io/.

Significant progress has been made in text-to-video generation through the use of powerful generative models and large-scale internet data. However, substantial challenges remain in precisely controlling individual concepts within the generated video, such as the motion and appearance of specific characters and the movement of viewpoints. In this work, we propose a novel paradigm that generates each concept in 3D representation separately and then composes them with priors from Large Language Models (LLM) and 2D diffusion models. Specifically, given an input textual prompt, our scheme consists of three stages: 1) We leverage LLM as the director to first decompose the complex query into several sub-prompts that indicate individual concepts within the video~(e.g., scene, objects, motions), then we let LLM to invoke pre-trained expert models to obtain corresponding 3D representations of concepts. 2) To compose these representations, we prompt multi-modal LLM to produce coarse guidance on the scales and coordinates of trajectories for the objects. 3) To make the generated frames adhere to natural image distribution, we further leverage 2D diffusion priors and use Score Distillation Sampling to refine the composition. Extensive experiments demonstrate that our method can generate high-fidelity videos from text with diverse motion and flexible control over each concept. Project page: https://aka.ms/c3v.

Document chunking is a critical task in natural language processing (NLP) that involves dividing a document into meaningful segments. Traditional methods often rely solely on semantic analysis, ignoring the spatial layout of elements, which is crucial for understanding relationships in complex documents. This paper introduces a novel hybrid approach that combines layout structure, semantic analysis, and spatial relationships to enhance the cohesion and accuracy of document chunks. By leveraging bounding box information (bbox) and text embeddings, our method constructs a weighted graph representation of document elements, which is then clustered using spectral clustering. Experimental results demonstrate that this approach outperforms traditional methods, particularly in documents with diverse layouts such as reports, articles, and multi-column designs. The proposed method also ensures that no chunk exceeds a specified token length, making it suitable for use cases where token limits are critical (e.g., language models with input size limitations)

Demonstration augmentation is proposed for cost-efficient data acquisition, but existing methods are fundamentally limited in deformable manipulation due to two challenges: (1) the state space is high-dimensional with physics-induced constraints, making valid configurations impossible to reach via low-dimensional pose perturbations; and (2) trajectory transfer is non-equivariant, as material points no longer move rigidly together under deformation. We present DeformGen, a dynamics-based augmentation framework that achieves topological diversity for deformable objects. For the state challenge, DeformGen expands the valid state distribution by applying localized physical disturbances and forward-simulating the dynamics to obtain topology-coherent, physically plausible deformable states. For the trajectory challenge, DeformGen transfers source manipulation trajectories via deformation-field warping, which lifts per-particle displacements into a continuous spatial function to adapt the end-effector trajectory consistently with the deformed geometry. In this way, our method jointly augments the state distribution and its associated manipulation behavior. Experiments on high-fidelity deformable manipulation benchmarks show that DeformGen generally improves policy learning compared with training on the original demonstrations alone and with rigid-style augmentation baselines.

Modern generative models produce high-quality individual outputs but struggle to sample diversely, even when explicitly instructed to do so. We introduce MINE-SAMPLE-RENDER (MSR), a test-time approach that externalizes the diversity into an explicit, corpus-derived sampling procedure. Our pipeline (i) mines an interpretable categorical schema from a corpus of real artifacts and supplies statistics for sampling; (ii) samples attribute configurations from the corpus-derived statistics; (iii) uses a generative model purely as a conditional renderer of a sampled configuration. Across weather report generation, user simulation, webpage design, text-to-image generation, and agent-generated 3D assets, we evaluate the diversity and output quality of MSR-guided generation and show that MSR improves alignment with corpus distributions and diversity of generated outputs.

Recent AIGC systems possess the capability to generate digital multimedia content based on human language instructions, such as text, image and video. However, when it comes to speech, existing methods related to human instruction-to-speech generation exhibit two limitations. Firstly, they require the division of inputs into content prompt (transcript) and description prompt (style and speaker), instead of directly supporting human instruction. This division is less natural in form and does not align with other AIGC models. Secondly, the practice of utilizing an independent description prompt to model speech style, without considering the transcript content, restricts the ability to control speech at a fine-grained level. To address these limitations, we propose VoxInstruct, a novel unified multilingual codec language modeling framework that extends traditional text-to-speech tasks into a general human instruction-to-speech task. Our approach enhances the expressiveness of human instruction-guided speech generation and aligns the speech generation paradigm with other modalities. To enable the model to automatically extract the content of synthesized speech from raw text instructions, we introduce speech semantic tokens as an intermediate representation for instruction-to-content guidance. We also incorporate multiple Classifier-Free Guidance (CFG) strategies into our codec language model, which strengthens the generated speech following human instructions. Furthermore, our model architecture and training strategies allow for the simultaneous support of combining speech prompt and descriptive human instruction for expressive speech synthesis, which is a first-of-its-kind attempt. Codes, models and demos are at: https://github.com/thuhcsi/VoxInstruct.

Vision-Language-Action (VLA) policies that execute fixed-length action chunks can exhibit multimodal bifurcation: a cross-chunk inconsistency in which adjacent chunks generated from independent Gaussian latents can converge to incompatible trajectory modes, producing abrupt discontinuities at chunk boundaries. Existing remedies either require backpropagation through the policy at each denoising step, rely on rejection sampling, or require retraining, each trading computational cost or task reliability for smoother transitions. We propose SEAM (Smooth Execution of Action-Chunked Motion), a training-free inference-time method for flow matching VLAs. SEAM exploits a simple synchronous-execution insight: after the robot consumes the executed prefix, the previous chunk's unexecuted tail is already available as an analytic consistency reference. Its core mechanism, Velocity-guided Loss Steering (VLS), derives a time-dependent target from this tail and applies a closed-form correction after each Euler step without backpropagating through the policy network. On LIBERO-10 with pi_0.5, SEAM reduces boundary jerk by 28%, reduces chunk transition discontinuity by 27%, preserves baseline-level task success, and keeps denoising-loop cost near the unguided baseline.

Video diffusion models have achieved remarkable progress in generating high-quality videos. However, these models struggle to represent the temporal succession of multiple events in real-world videos and lack explicit mechanisms to control when semantic concepts appear, how long they persist, and the order in which multiple events occur. Such control is especially important for movie-grade video synthesis, where coherent storytelling depends on precise timing, duration, and transitions between events. When using a single paragraph-style prompt to describe a sequence of complex events, models often exhibit semantic entanglement, where concepts intended for different moments in the video bleed into one another, resulting in poor text-video alignment. To address these limitations, we propose Prompt Relay, an inference-time, plug-and-play method to enable fine-grained temporal control in multi-event video generation, requiring no architectural modifications and no additional computational overhead. Prompt Relay introduces a penalty into the cross-attention mechanism, so that each temporal segment attends only to its assigned prompt, allowing the model to represent one semantic concept at a time and thereby improving temporal prompt alignment, reducing semantic interference, and enhancing visual quality.

In-context learning (ICL) adapts large language models (LLMs) to new tasks by conditioning on demonstrations in the prompt without parameter updates. With long-context models, many-shot ICL can use dozens to hundreds of examples and achieve performance comparable to fine-tuning, yet current understanding of its scaling behavior is largely derived from non-reasoning tasks. We study many-shot chain-of-thought in-context learning (CoT-ICL) for reasoning and show that standard many-shot rules do not transfer. Across non-reasoning and reasoning-oriented LLMs and across non-reasoning and reasoning tasks, we find: (i) a setting-dependent scaling effect, where increasing the number of CoT demonstrations is unstable for non-reasoning LLMs and benefits mainly reasoning-oriented LLMs; (ii) similarity-based retrieval helps on non-reasoning tasks but fails on reasoning, since semantic similarity poorly predicts procedural (i.e., CoT) compatibility; and (iii) an order-scaling effect, where performance variance grows with more CoT demonstrations. We interpret these behaviors by viewing many-shot CoT-ICL as in-context test-time learning rather than scaled pattern matching, and suggests two principles: (i) demonstrations should be easy for the target model to understand, and (ii) they should be ordered to support a smooth conceptual progression. Guided by the principle, we propose Curvilinear Demonstration Selection (CDS), a simple ordering method that yields up to a 5.42 percentage-point gain on geometry with 64 demonstrations. Overall, our results reframe the long context window from a retrieval buffer into a structured curriculum for in-context test-time learning.

Slides serve as a critical medium for conveying information in presentation-oriented scenarios such as academia, education, and business. Despite their importance, creating high-quality slide decks remains time-consuming and cognitively demanding. Recent advances in generative models, such as Nano Banana Pro, have made automated slide generation increasingly feasible. However, existing evaluations of slide generation are often coarse-grained and rely on holistic judgments, making it difficult to accurately assess model capabilities or track meaningful advances in the field. In practice, the lack of fine-grained, verifiable evaluation criteria poses a critical bottleneck for both research and real-world deployment. In this paper, we propose PresentBench, a fine-grained, rubric-based benchmark for evaluating automated real-world slide generation. It contains 238 evaluation instances, each supplemented with background materials required for slide creation. Moreover, we manually design an average of 54.1 checklist items per instance, each formulated as a binary question, to enable fine-grained, instance-specific evaluation of the generated slide decks. Extensive experiments show that PresentBench provides more reliable evaluation results than existing methods, and exhibits significantly stronger alignment with human preferences. Furthermore, our benchmark reveals that NotebookLM significantly outperforms other slide generation methods, highlighting substantial recent progress in this domain.

We address a fundamental challenge in Reinforcement Learning from Interaction Demonstration (RLID): demonstration noise and coverage limitations. While existing data collection approaches provide valuable interaction demonstrations, they often yield sparse, disconnected, and noisy trajectories that fail to capture the full spectrum of possible skill variations and transitions. Our key insight is that despite noisy and sparse demonstrations, there exist infinite physically feasible trajectories that naturally bridge between demonstrated skills or emerge from their neighboring states, forming a continuous space of possible skill variations and transitions. Building upon this insight, we present two data augmentation techniques: a Stitched Trajectory Graph (STG) that discovers potential transitions between demonstration skills, and a State Transition Field (STF) that establishes unique connections for arbitrary states within the demonstration neighborhood. To enable effective RLID with augmented data, we develop an Adaptive Trajectory Sampling (ATS) strategy for dynamic curriculum generation and a historical encoding mechanism for memory-dependent skill learning. Our approach enables robust skill acquisition that significantly generalizes beyond the reference demonstrations. Extensive experiments across diverse interaction tasks demonstrate substantial improvements over state-of-the-art methods in terms of convergence stability, generalization capability, and recovery robustness.

State-of-the-art physical AI models generate a chunk of actions per inference through diffusion or flow matching, iteratively refining an initial noise sample into an action trajectory. Because this inference process is inherently stochastic, committing to a single trajectory per round is brittle, and this brittleness compounds across the many sequential rounds that comprise a complete episode. We introduce KeyStone, an inference-time self-consistency method for diffusion-based action generation that draws K candidate action chunks in parallel from a shared model context, clusters them in continuous action space, and returns the medoid of the largest cluster -- no additional model required. Two properties make this practical. First, the compact nature of action trajectories makes diffusion inference memory-bandwidth bound, leaving spare compute capacity to run K chains in parallel with no additional wall-clock latency. Second, unlike token or pixel spaces where distance carries no semantic meaning and selection requires a learned judge, action chunks are geometrically structured such that Euclidean distance directly reflects physical similarity, making selection principled and judge-free. Across diverse vision-language-action models (VLAs) and world-action models (WAMs), KeyStone improves task success rates by up to 13.3\% over single-trajectory sampling with negligible latency overhead, while having on par accuracy with model-based selectors at no training cost. We open source KeyStone at https://github.com/dywsjtu/keystone.

Imitation learning has enabled robots to acquire complex visuomotor manipulation skills from demonstrations, but deployment failures remain a major obstacle, especially for long-horizon action-chunked policies. Once execution drifts off the demonstration manifold, these policies often continue producing locally plausible actions without recovering from the failure. Existing runtime monitors either require failure data, over-trigger under benign feature drift, or stop at failure detection without providing a recovery mechanism. We present Rewind-IL, a training-free online safeguard framework for generative action-chunked imitation policies. Rewind-IL combines a zero-shot failure detector based on Temporal Inter-chunk Discrepancy Estimate (TIDE), calibrated with split conformal prediction, with a state-respawning mechanism that returns the robot to a semantically verified safe intermediate state. Offline, a vision-language model identifies recovery checkpoints in demonstrations, and the frozen policy encoder is used to construct a compact checkpoint feature database. Online, Rewind-IL monitors self-consistency in overlapping action chunks, tracks similarity to the checkpoint library, and, upon failure, rewinds execution to the latest verified safe state before restarting inference from a clean policy state. Experiments on real-world and simulated long-horizon manipulation tasks, including transfer to flow-matching action-chunked policies, demonstrate that policy-internal consistency coupled with semantically grounded respawning offers a practical route to improved reliability in imitation learning. Supplemental materials are available at https://sjay05.github.io/rewind-il

We present a method for generating physically-based materials for 3D shapes based on a video diffusion transformer architecture. Our method is conditioned on input geometry and a text description, and jointly models multiple material properties (base color, roughness, metallicity, height map) to form physically plausible materials. We further introduce a custom variational auto-encoder which encodes multiple material modalities into a compact latent space, which enables joint generation of multiple modalities without increasing the number of tokens. Our pipeline generates high-quality materials for 3D shapes given a text prompt, compatible with common content creation tools.

Expert demonstrations are widely assumed to be the gold standard for robot imitation learning. Yet for fine-grained manipulation such as insertion, stacking, and alignment, we uncover a counterintuitive failure mode: fluent demonstrations can be poor teachers. A skilled teleoperator compresses the decisive moments of alignment and recovery into a brief temporal window, leaving the policy flooded with redundant free-space motion and starved of supervision exactly where precision determines success. We address this bottleneck at two levels. At the data level, slowing down near alignment and resampling critical segments both help, yet the gain comes mainly from broadening the coverage of recovery states the policy must learn, not from reweighting frames it already has. Such data-side fixes, however, leave the policy's per-frame view untouched: a single image still maps directly to an action, and the local motion that governs correction stays implicit. We therefore turn to the representation level and introduce STAIR (Spatio-Temporal feature As an Interface for Robot learning), a compact dynamic feature that bridges the vision-language model and the action expert, distilling the short-horizon motion already recorded in each trajectory into dense, motion-aware supervision. Trained on fluent data alone, STAIR recovers most of the deliberate-demonstration gain (50.0 to 62.2% overall, approaching the 64.4% of deliberate demonstrations). These results call for a more pedagogical view of robot data, optimized for machine learnability rather than human efficiency alone.

Interactive video world models need to generate each video chunk efficiently while responding faithfully to user controls. Many systems use chunk-wise autoregressive generation with few-step denoising, but each chunk still requires several costly denoising iterations. Training-free caching can reduce this cost, yet existing policies make reuse decisions primarily from model-internal denoising dynamics and do not explicitly account for control transitions. Actually, interactive generation explicitly exposes a signal they do not use: the controls for a chunk arrive before it is denoised, so a schedule derived from them costs no forward pass. To this end, we analyze adjacent chunks under different control regimes and find that structural similarity drops around action changes, while low-frequency structure remains more persistent than high-frequency detail. Motivated by these observations, we propose CtrlCache, a training-free control-aware caching framework that adapts computation to the current control sequence. Specifically, the action-aware scheduling and refresh policy detects action changes across and within chunks, and labels each chunk as initial, transition, turning, or steady state. At one selected interior denoising step, initial and transition chunks retain full computation, while turning and steady chunks reuse the transformer residual from the most recent fully computed step in the same chunk. To exploit the persistence of low-frequency structure during steady interaction, we further introduce a frequency-mixed history prior guidance that incorporates complementary information from the preceding clean latent without an additional DiT forward pass. Evaluated on Matrix-Game 2.0 and LingBot-World v1/v2, CtrlCache achieves 1.21x to 1.41x DiT-backbone speedups without model retraining while improving WBench Overall scores over original inference across all three models.

We propose a novel application of prompting Pre-trained Language Models (PLMs) to generate analogies and study how to design effective prompts for two task settings: generating a source concept analogous to a given target concept (aka Analogous Concept Generation or ACG), and generating an explanation of the similarity between a given pair of target concept and source concept (aka Analogous Explanation Generation or AEG). We found that it is feasible to prompt InstructGPT to generate meaningful analogies and the best prompts tend to be precise imperative statements especially with a low temperature setting. We also systematically analyzed the sensitivity of the InstructGPT model to prompt design, temperature, and injected spelling errors, and found that the model is particularly sensitive to certain variations (e.g., questions vs. imperative statements). Further, we conducted human evaluation on 1.4k of the generated analogies and found that the quality of generations varies substantially by model size. The largest InstructGPT model can achieve human-level performance at generating meaningful analogies for a given target while there is still room for improvement on the AEG task.

A recent line of synthetic-data work reconstructs the thinking behind existing text rather than rewriting the text itself, but it operates on short web passages, recovers only local thoughts, and leaves the structure of whole documents untouched. Scientific papers are written to a clear and largely uniform structure and make a natural substrate for lifting this paradigm to the document level. We present a pipeline that unfolds each paper into a multi-turn generation trajectory in which a teacher model reconstructs the writing process of the whole paper: a writing request, a global plan, and pre-writing deliberation for each section. All section texts and the abstract are kept verbatim from the source paper. We apply the pipeline to 1.8M quality-filtered arXiv papers and obtain a 60B-token corpus for continued pre-training (CPT) that is roughly twice the source text. The same reverse construction extends to instruction data and evaluation. We build an SFT dataset of 200K samples using answers derived from paper text. We also use held-out papers to construct PAW-Bench, a benchmark of 2,940 academic writing tasks with per-task rubrics and checklists. In controlled experiments, CPT on our corpus followed by SFT on public datasets improves writing performance while preserving general reasoning and improving long document reading. Replacing part of the writing SFT data with our synthetic instruction data further improves performance on PAW-Bench.