Daily Papers

Large language models serve applications with diverse inference budgets, but training and maintaining separate models for each budget incurs substantial costs. Recent Looped Transformers enable flexible inference computation through parameter reuse, but maintaining strong performance across different inference budgets remains an open challenge. We introduce Accordion, a mixture-of-experts-based model that supports five inference budgets through fixed-prefix layer looping. Each budget follows a pre-defined execution path, while the minimum budget retains the unlooped model. Joint pretraining samples one budget per micro-batch and optimizes its next-token prediction loss without additional cross-budget consistency objectives. We further preserve these inference budgets through supervised fine-tuning and reinforcement learning, where parameter-group merging and budget-matched multi-teacher on-policy distillation integrate three domain experts into one model. After 3.6T tokens of pretraining, increasing inference depth improves Accordion-6B-A0.5B's five-category macro-average across 37 tasks by 3.01 percentage points, with the middle budget capturing 89% of this gain using half as many additional layer executions. The final model surpasses each domain expert on its corresponding task-and-budget average, while achieving strong instruction-following performance across all budgets and retaining depth-dependent gains in mathematical reasoning and code generation.

A main promise of looped language models is depth-adaptive inference. By looping a block of shared layers a variable number of times, the model can use less compute for "easy" tokens and more for "hard" ones. However, tokens with different numbers of loops cannot share a uniform forward pass and therefore cannot be handled by standard batching systems such as vLLM. The practical value of depth-adaptive inference thus hinges on whether batching can be made efficient. We introduce the first efficient method for depth-adaptive looped LMs via continuous depth batching (CDB), which forms new batches between loop steps. Our method dynamically schedules looped and non-looped parts of the architecture, manages looped KV-caching, and predicts which tokens will exit the loop in advance so it can prepare batches asynchronously. Experiments on Ouro 1.4B and Huginn 3.5B show that fully looped architectures are best suited to depth-adaptive inference, as large non-looped layers outside the recurrent core (e.g., token embedding, LM head, and unshared transformer blocks) slow down and complicate scheduling. Overall, CDB realizes up to 99% of the estimated maximum speedup available, leaving further gains primarily dependent on model architecture and exit behavior.

Reinforcement learning (RL) has become a key paradigm for enhancing the reasoning of large language models, yet the high dimensionality of parameter updates makes its training dynamics hard to analyze. We study reinforcement learning with verifiable rewards (RLVR) and use vector steering to identify a low-dimensional effective manifold in activation space associated with RL-induced gains. We uncover two geometric properties. (1) Effective Manifold Capacity: the capacity needed to reproduce RL gains can be very small but is not infinitely compressible; at extremely low capacity, intervention dimensionality and input-dependent expressiveness become key constraints, and this requirement varies with injection depth. (2) Control Manifold Separation: effective control directions lie mainly in the low-variance complement of the activation principal subspace. Within a task and base model, the learned geometry stays largely consistent across training configurations, and across tasks geometric alignment correlates with capability transfer. Experiments on 5 LLMs and 6 verifiable-reward tasks support these findings. We then propose Alpha-Stabler, a plug-and-play framework with a Predictor that monitors principal-subspace intrusion for early collapse warnings, and a Controller that removes the principal-subspace component of activation gradients during backpropagation while preserving the orthogonal complement. Alpha-Stabler stabilizes training for 2,000 steps and consistently improves RL gains, offering practical insights for robust post-training. Code: https://github.com/caiyuchen-ustc/On_Policy_Vector_Training

Depth is a natural way to increase the computational capacity in Transformers, yet the contribution of deeper layers can diminish as depth grows larger. Recent approaches enhance normalization (e.g., LayerNorm Scaling) or residual connections (e.g., mHC, AttnRes) to enable better information flow and depth utilization. However, it remains unclear whether they truly translate increased architectural depth into effective computational depth, and whether their reported gains stem from better access to information across depth, or unaccounted-for confounding factors. In this paper, we introduce DepthBench, a controlled benchmark for studying computational depth across various architectures. We systematically vary the width--depth aspect ratio (d_{model}/n_{layer}) from shallow--wide to deep--narrow shapes, while keeping the model size and pre-training recipe fixed. Across 10 representative architectures, we find that the benefit of allocating more capacity to depth is strongly architecture-dependent. Standard Pre-LN and most of its norm- and scaling-based variants provide little benefit and can even degrade performance as models become deeper and narrower, whereas HC and Full AttnRes improve consistently even at extreme deep shapes. These gains extend beyond pre-training loss and consistently translate into improved domain-specific performance and effective computation. Controlled layer-level analyses further show that the gains of HC and Full AttnRes are associated with more effective utilization of additional layers, revealing distinct mechanisms of computational depth across architectures. Overall, our results identify residual connection design as a key determinant of whether depth can serve as a meaningful scaling axis by enabling additional architectural depth to translate into effective computation.

As data propagates through a Transformer, the norm of its hidden states grows by orders of magnitude with depth, a phenomenon framed as 'curse of depth' and nearly universally treated as a pathology to be suppressed. We take the opposite view. Across 16 pre-trained LLMs from 9 families, spanning dense, mixture-of-experts and hybrid architectures and Pre-, Peri- and Post-Norm designs, we find that this growth reflects an emergent depth-positional encoding, carried by the only learned per-layer gain on the residual stream, the normalization weight γ: with depth, γ grows in magnitude and rotates in direction, jointly encoding the layer index. We make this depth-conditioned encoding explicit with LayerRoPE, an implicit analog of RoPE along the depth axis, which replaces all layerwise γ vectors with a single shared vector and depth-conditioned scalars, at a net reduction in parameters and <0.02% change in FLOPs. Across a model ladder scaled up to 100B+ tokens, LayerRoPE consistently outperforms Pre-, Post- and Peri-Norm and Layer-Norm Scaling, reaching Pre-Norm's 1.3B loss with 3.4times less compute; LayerRoPE is the only approach that shows strong convergence and improves near monotonically as depth scales to 512 layers. It improves learning-rate sensitivity by 3-10times, and transfers naively to and consistently improves looped latent models and Vision Transformers. Inspecting its learned schedule inverts the prevailing premise: LayerRoPE does not shrink the residual stream but widens it, damping what each block reads while amplifying what it writes. Depth stability, our results suggest, calls not for suppressing the residual stream, but for depth-conditioned regulation of the computational blocks it feeds.

Neural scaling laws describe how language model loss decreases with parameters and data, but treat architecture as interchangeable--a billion parameters could arise from a shallow-wide model (10 layers & 8,192 hidden dimension) or a deep-narrow one (80 layers & 2,048 hidden dimension). We propose architecture-conditioned scaling laws decomposing this dependence, finding that optimal depth scales as D* ~ C^0.12 while optimal width scales as W* ~ C^0.34, meaning width should grow 2.8x faster than depth. We discover a critical depth phenomenon: beyond D_crit ~ W^0.44 (sublinear in W), adding layers increases loss despite adding parameters--the Depth Delusion. Empirically, we validate these findings across 30 transformer architectures spanning 17M to 7B parameters, each trained on representative high-compute samples, achieving R^2 = 0.922. Our central finding: at 7B scale, a 64-layer model (6.38B params) underperforms a 32-layer model (6.86B params) by 0.12 nats, despite being significantly deeper. This demonstrates that optimal depth-width tradeoffs persist at the production scale.

Diffusion models may be viewed as hierarchical variational autoencoders (VAEs) with two improvements: parameter sharing for the conditional distributions in the generative process and efficient computation of the loss as independent terms over the hierarchy. We consider two changes to the diffusion model that retain these advantages while adding flexibility to the model. Firstly, we introduce a data- and depth-dependent mean function in the diffusion process, which leads to a modified diffusion loss. Our proposed framework, DiffEnc, achieves a statistically significant improvement in likelihood on CIFAR-10. Secondly, we let the ratio of the noise variance of the reverse encoder process and the generative process be a free weight parameter rather than being fixed to 1. This leads to theoretical insights: For a finite depth hierarchy, the evidence lower bound (ELBO) can be used as an objective for a weighted diffusion loss approach and for optimizing the noise schedule specifically for inference. For the infinite-depth hierarchy, on the other hand, the weight parameter has to be 1 to have a well-defined ELBO.

Modern LLMs are increasingly deep, and depth correlates with performance, albeit with diminishing returns. However, do these models use their depth efficiently? Do they compose more features to create higher-order computations that are impossible in shallow models, or do they merely spread the same kinds of computation out over more layers? To address these questions, we analyze the residual stream of the Llama 3.1 and Qwen 3 family of models. We find: First, comparing the output of the sublayers to the residual stream reveals that layers in the second half contribute much less than those in the first half, with a clear phase transition between the two halves. Second, skipping layers in the second half has a much smaller effect on future computations and output predictions. Third, for multihop tasks, we are unable to find evidence that models are using increased depth to compose subresults in examples involving many hops. Fourth, we seek to directly address whether deeper models are using their additional layers to perform new kinds of computation. To do this, we train linear maps from the residual stream of a shallow model to a deeper one. We find that layers with the same relative depth map best to each other, suggesting that the larger model simply spreads the same computations out over its many layers. All this evidence suggests that deeper models are not using their depth to learn new kinds of computation, but only using the greater depth to perform more fine-grained adjustments to the residual. This may help explain why increasing scale leads to diminishing returns for stacked Transformer architectures.

Deep neural networks (DNNs) exhibit an exceptional capacity for generalization in practical applications. This work aims to capture the effect and benefits of depth for supervised learning via information-theoretic generalization bounds. We first derive two hierarchical bounds on the generalization error in terms of the Kullback-Leibler (KL) divergence or the 1-Wasserstein distance between the train and test distributions of the network internal representations. The KL divergence bound shrinks as the layer index increases, while the Wasserstein bound implies the existence of a layer that serves as a generalization funnel, which attains a minimal 1-Wasserstein distance. Analytic expressions for both bounds are derived under the setting of binary Gaussian classification with linear DNNs. To quantify the contraction of the relevant information measures when moving deeper into the network, we analyze the strong data processing inequality (SDPI) coefficient between consecutive layers of three regularized DNN models: Dropout, DropConnect, and Gaussian noise injection. This enables refining our generalization bounds to capture the contraction as a function of the network architecture parameters. Specializing our results to DNNs with a finite parameter space and the Gibbs algorithm reveals that deeper yet narrower network architectures generalize better in those examples, although how broadly this statement applies remains a question.

Conventional wisdom in deep learning states that increasing depth improves expressiveness but complicates optimization. This paper suggests that, sometimes, increasing depth can speed up optimization. The effect of depth on optimization is decoupled from expressiveness by focusing on settings where additional layers amount to overparameterization - linear neural networks, a well-studied model. Theoretical analysis, as well as experiments, show that here depth acts as a preconditioner which may accelerate convergence. Even on simple convex problems such as linear regression with ell_p loss, p>2, gradient descent can benefit from transitioning to a non-convex overparameterized objective, more than it would from some common acceleration schemes. We also prove that it is mathematically impossible to obtain the acceleration effect of overparametrization via gradients of any regularizer.

Computer-use agents learn from what their actions change, so training one needs applications it can act on, break and reset. The applications that matter most are login-gated and stateful, so synthetic environments stand in for them. Recent pipelines generate such environments in bulk, which moves the bottleneck from how many exist to what is inside each one. The returns, we find, come from three properties: how much behavioural depth an environment carries, whether it targets the interaction an agent actually fails, and whether it improves alongside the model. We present Echoverse, which compiles specifications into stateful applications whose tasks are graded against the application's own database, and a co-evolution loop that reads every graded rollout twice: as repairs to the environment, its tasks and its verifier, and as training signal for the model. Trained on twelve such environments, a 9B model improves from 36.5% to 67.1% across fourteen evaluation splits, within fourteen points of the much larger frontier model that taught it. We examine each property in turn. On the same domains, shallow environments push live-site accuracy below the base model (80.0 to 75.0) while deep ones raise it (80.0 to 85.0 and 48.0 to 65.0); drilling one interface control across many renderings transfers to held-out widget families and to the open web; and repairing a single environment lifts the model trained on it from 16.2% to 38.5%. The same worlds serve as reinforcement-learning environments, where a reward combining the grounded verifier with a dense per-step judge raises held-out score from 58.8% to 68.0%. We release four environments as a benchmark, with their applications, seed data and grounded graders. Code: https://aka.ms/echoverse

Recent work has demonstrated the curse of depth in large language models (LLMs), where later layers contribute less to learning and representation than earlier layers. Such under-utilization is linked to the accumulated growth of variance in Pre-Layer Normalization, which can push deep blocks toward near-identity behavior. In this paper, we demonstrate that, sparsity, beyond enabling efficiency, acts as a regulator of variance propagation and thereby improves depth utilization. Our investigation covers two sources of sparsity: (i) implicit sparsity, which emerges from training and data conditions, including weight sparsity induced by weight decay and attention sparsity induced by long context inputs; and (ii) explicit sparsity, which is enforced by architectural design, including key/value-sharing sparsity in Grouped-Query Attention and expert-activation sparsity in Mixtureof-Experts. Our claim is thoroughly supported by controlled depth-scaling experiments and targeted layer effectiveness interventions. Across settings, we observe a consistent relationship: sparsity improves layer utilization by reducing output variance and promoting functional differentiation. We eventually distill our findings into a practical rule-of-thumb recipe for training deptheffective LLMs, yielding a notable 4.6% accuracy improvement on downstream tasks. Our results reveal sparsity, arising naturally from standard design choices, as a key yet previously overlooked mechanism for effective depth scaling in LLMs. Code is available at https://github.com/pUmpKin-Co/SparsityAndCoD.

Looping, reusing a block of layers across depth, and depth growing, training shallow-to-deep models by duplicating middle layers, have both been linked to stronger reasoning, but their relationship remains unclear. We provide a mechanistic unification: looped and depth-grown models exhibit convergent depth-wise signatures, including increased reliance on late layers and recurring patterns aligned with the looped or grown block. These shared signatures support the view that their gains stem from a common form of iterative computation. Building on this connection, we show that the two techniques are adaptable and composable: applying inference-time looping to the middle blocks of a depth-grown model improves accuracy on some reasoning primitives by up to 2times, despite the model never being trained to loop. Both approaches also adapt better than the baseline when given more in-context examples or additional supervised fine-tuning data. Additionally, depth-grown models achieve the largest reasoning gains when using higher-quality, math-heavy cooldown mixtures, which can be further boosted by adapting a middle block to loop. Overall, our results position depth growth and looping as complementary, practical methods for inducing and scaling iterative computation to improve reasoning.

Existing approaches to increasing the effective depth of Transformers predominantly rely on parameter reuse, extending computation through recursive execution. Under this paradigm, the network structure remains static along the training timeline, and additional computational depth is uniformly assigned to entire blocks at the parameter level. This rigidity across training time and parameter space leads to substantial computational redundancy during training. In contrast, we argue that depth allocation during training should not be a static preset, but rather a progressively growing structural process. Our systematic analysis reveals a deep-to-shallow maturation trajectory across layers, where high-entropy attention heads play a crucial role in semantic integration. Motivated by this observation, we introduce the Sparse Growing Transformer (SGT). SGT is a training-time sparse depth allocation framework that progressively extends recurrence from deeper to shallower layers via targeted attention looping on informative heads. This mechanism induces structural sparsity by selectively increasing depth only for a small subset of parameters as training evolves. Extensive experiments across multiple parameter scales demonstrate that SGT consistently outperforms training-time static block-level looping baselines under comparable settings, while reducing the additional training FLOPs overhead from approximately 16--20% to only 1--3% relative to a standard Transformer backbone.

Deep neural networks with repeated architectural blocks, such as transformers, often exhibit structured relationships across layers that emerge during training. Motivated by this observation, we introduce Depth-wise Gradient Augmentation, a general optimization paradigm in which the update applied to each layer is obtained by transforming the collection of block-wise optimizer updates along the depth dimension. Within this framework, we study Gradient Smoothing, a family of depth-wise smoothing methods, and instantiate it with a simple local Window Smoothing operator. The resulting method operates directly on block-wise updates produced by arbitrary base optimizers (e.g., SGD, Adam, Muon), incurs minimal computational overhead, and is compatible with existing optimization pipelines. We evaluate Gradient Smoothing across a diverse set of architectures and training regimes, including language model pretraining, RL post-training of LLMs for reasoning, diffusion modeling, and image classification with Vision Transformers. Across these settings, Gradient Smoothing consistently improves optimization and generalization performance without modifying model architectures or training objectives. We further show that it promotes more structured representation evolution across depth, consistent with its interpretation as a structured depth-wise preconditioning method. Together, these results establish Depth-wise Gradient Augmentation as a promising framework for exploiting cross-depth structure in optimization and demonstrate Gradient Smoothing as a simple and broadly applicable instantiation.

Recent advances in monocular depth estimation have been made by incorporating natural language as additional guidance. Although yielding impressive results, the impact of the language prior, particularly in terms of generalization and robustness, remains unexplored. In this paper, we address this gap by quantifying the impact of this prior and introduce methods to benchmark its effectiveness across various settings. We generate "low-level" sentences that convey object-centric, three-dimensional spatial relationships, incorporate them as additional language priors and evaluate their downstream impact on depth estimation. Our key finding is that current language-guided depth estimators perform optimally only with scene-level descriptions and counter-intuitively fare worse with low level descriptions. Despite leveraging additional data, these methods are not robust to directed adversarial attacks and decline in performance with an increase in distribution shift. Finally, to provide a foundation for future research, we identify points of failures and offer insights to better understand these shortcomings. With an increasing number of methods using language for depth estimation, our findings highlight the opportunities and pitfalls that require careful consideration for effective deployment in real-world settings

Recursive self-improvement (RSI) describes a system that improves not only its behavior but also the process by which it improves. Recent digital agents test this idea by rewriting their own code and checking each version with executable tests. Bringing these mechanisms into the physical world requires learning from partial observations through costly trials, while accounting for changing operating conditions and potentially irreversible consequences. We position RSI within robot learning and trace pathways from improving robot capabilities to improving the processes that generate them. We examine how physical experience can strengthen these improvement mechanisms and when the resulting gains can support further self-improvement of the mechanisms themselves. Gains carry forward only when feedback addresses remaining learning needs, the receiving component can use the change, its value survives changes in tasks or hardware, and continued practice remains safe and affordable. Existing studies, concentrated in manipulation, support behavioral improvement, benefits to later learning, and procedure improvement. Some systems also change the improver's knowledge or tools, but the physical studies reviewed here have yet to isolate gains attributable to recursion. We synthesize these findings into evaluation principles and research directions for machines that, trial by trial, safely improve the way they improve.

Scaling data, diversity and model capacity has improved embodied learning in physical environments, where diverse experiences remain grounded in shared physical laws. Whether these gains extend to virtual worlds with different visual styles, dynamics, controls, and objectives remains unclear. We investigate this question through a controlled study of continued pre-training (CPT) across three axes: data volume, diversity, and model size. Our 120 training configurations span four model sizes from 0.8B to 27B, six data budgets from 50 to 1,600 hours, and five mixtures ranging from Minecraft-only data to diverse multi-world corpora. We assess performance and generalization using three-level validation losses and gameplay benchmarks from in-corpus worlds to unseen worlds. Our results show: (1) more data improves in-corpus performance, diversity improves transfer to related worlds with limited gains in distant worlds, and model size improves data efficiency but generalizes worse to distant worlds under single-world training; (2) we observe an early interface phase with broad cross-world benefits and a later world phase with gains narrowed to in-corpus and related worlds, and fit an empirical scaling law relating validation loss to data volume, diversity and model size; and (3) our models are competitive with Minecraft specialists and frontier models in 3D worlds, and perform best in real-time settings. However, the limits of imitation and persistent gaps in distant worlds suggest that building generalist embodied agents requires richer training stages beyond continued pre-training.

The separation power of a machine learning model refers to its ability to distinguish between different inputs and is often used as a proxy for its expressivity. Indeed, knowing the separation power of a family of models is a necessary condition to obtain fine-grained universality results. In this paper, we analyze the separation power of equivariant neural networks, such as convolutional and permutation-invariant networks. We first present a complete characterization of inputs indistinguishable by models derived by a given architecture. From this results, we derive how separability is influenced by hyperparameters and architectural choices-such as activation functions, depth, hidden layer width, and representation types. Notably, all non-polynomial activations, including ReLU and sigmoid, are equivalent in expressivity and reach maximum separation power. Depth improves separation power up to a threshold, after which further increases have no effect. Adding invariant features to hidden representations does not impact separation power. Finally, block decomposition of hidden representations affects separability, with minimal components forming a hierarchy in separation power that provides a straightforward method for comparing the separation power of models.

By classifying infinite-width neural networks and identifying the *optimal* limit, Tensor Programs IV and V demonstrated a universal way, called muP, for *widthwise hyperparameter transfer*, i.e., predicting optimal hyperparameters of wide neural networks from narrow ones. Here we investigate the analogous classification for *depthwise parametrizations* of deep residual networks (resnets). We classify depthwise parametrizations of block multiplier and learning rate by their infinite-width-then-depth limits. In resnets where each block has only one layer, we identify a unique optimal parametrization, called Depth-muP that extends muP and show empirically it admits depthwise hyperparameter transfer. We identify *feature diversity* as a crucial factor in deep networks, and Depth-muP can be characterized as maximizing both feature learning and feature diversity. Exploiting this, we find that absolute value, among all homogeneous nonlinearities, maximizes feature diversity and indeed empirically leads to significantly better performance. However, if each block is deeper (such as modern transformers), then we find fundamental limitations in all possible infinite-depth limits of such parametrizations, which we illustrate both theoretically and empirically on simple networks as well as Megatron transformer trained on Common Crawl.

Depth information is essential in computer vision, particularly in underwater imaging, robotics, and autonomous navigation. However, conventional augmentation techniques overlook depth aware transformations, limiting model robustness in real world depth variations. In this paper, we introduce Depth-Jitter, a novel depth-based augmentation technique that simulates natural depth variations to improve generalization. Our approach applies adaptive depth offsetting, guided by depth variance thresholds, to generate synthetic depth perturbations while preserving structural integrity. We evaluate Depth-Jitter on two benchmark datasets, FathomNet and UTDAC2020 demonstrating its impact on model stability under diverse depth conditions. Extensive experiments compare Depth-Jitter against traditional augmentation strategies such as ColorJitter, analyzing performance across varying learning rates, encoders, and loss functions. While Depth-Jitter does not always outperform conventional methods in absolute performance, it consistently enhances model stability and generalization in depth-sensitive environments. These findings highlight the potential of depth-aware augmentation for real-world applications and provide a foundation for further research into depth-based learning strategies. The proposed technique is publicly available to support advancements in depth-aware augmentation. The code is publicly available on https://github.com/mim-team/Depth-Jitter{github}.

Looped language models can run more iterations at test time, but additional iterations need not help them solve longer problems. For sequential state tracking, final-answer supervision does not specify how far each iteration should advance, and repeated updates can change the scale of the recurrent state. We introduce Progress-Aligned Recurrence (PAR), which trains the prediction at iteration k to match the state after the first k operations and rescales recurrent states to their first-iteration norms. On swap-S_5, a Qwen2.5-0.5B model trained on at most 32 moves achieves 95.5\% mean full-state accuracy at 512 moves, or 16times the training length, compared with 55.7\% reported for RLT and 0.8\% for explicit chain of thought on the same backbone. Controlled S_5 ablations show that removing norm anchoring reduces the extrapolation factor from 16times to below 2.2times, and replacing progress-aligned targets with final-answer supervision reduces it to at most 8times. A learned completion readout selects when to answer without a supplied stopping depth. When intermediate labels are unavailable, prefix self-distillation induces the correspondence from shorter problem prefixes using only final answers. The gains apply across sequential state-tracking tasks, establishing the task structure required for depth extrapolation. These findings support training intermediate predictions and state scale together to make additional recurrent depth useful for longer problems.

Self-attention selects information freely across the sequence, but across depth, Transformers merely add each layer's output to the residual stream, so later layers cannot selectively reuse earlier-layer representations. Recent cross-layer methods improve this flow but operate on hidden states outside attention, adding state beyond the key-value cache at inference--a cost that becomes increasingly salient as modern LLMs compress the cache with grouped-query and multi-head latent attention. We introduce Depth-Attention, which performs this selection inside the attention module itself: before a layer attends over the sequence, its query attends over the keys of earlier layers at the same token position and mixes their values into the value that self-attention then reads. Because Depth-Attention reuses the standard attention queries, keys, and value-cache slots, storing depth-mixed values in place of the original values, it adds no parameters and introduces no persistent inference state beyond the standard key-value cache--the same cache size as a vanilla decoder and less than hidden-state-based cross-layer methods. On Qwen3-style decoders at 1.5B and 3B parameters, Depth-Attention attains the lowest perplexity and the highest average downstream accuracy, improving over the vanilla Transformer by up to 2.3 accuracy points and surpassing strong cross-layer baselines in perplexity and average accuracy, while adding under 0.01% extra arithmetic FLOPs and no additional persistent inference state. The gains hold from 360M to 3B parameters and extend to looped Transformers.

In this paper, we introduce the Curse of Depth, a concept that highlights, explains, and addresses the recent observation in modern Large Language Models(LLMs) where nearly half of the layers are less effective than expected. We first confirm the wide existence of this phenomenon across the most popular families of LLMs such as Llama, Mistral, DeepSeek, and Qwen. Our analysis, theoretically and empirically, identifies that the underlying reason for the ineffectiveness of deep layers in LLMs is the widespread usage of Pre-Layer Normalization (Pre-LN). While Pre-LN stabilizes the training of Transformer LLMs, its output variance exponentially grows with the model depth, which undesirably causes the derivative of the deep Transformer blocks to be an identity matrix, and therefore barely contributes to the training. To resolve this training pitfall, we propose LayerNorm Scaling, which scales the variance of output of the layer normalization inversely by the square root of its depth. This simple modification mitigates the output variance explosion of deeper Transformer layers, improving their contribution. Our experimental results, spanning model sizes from 130M to 1B, demonstrate that LayerNorm Scaling significantly enhances LLM pre-training performance compared to Pre-LN. Moreover, this improvement seamlessly carries over to supervised fine-tuning. All these gains can be attributed to the fact that LayerNorm Scaling enables deeper layers to contribute more effectively during training.

Visual Auto-Regressive (VAR) models significantly reduce inference steps through the "next-scale" prediction paradigm. However, progressive multi-scale generation incurs substantial memory overhead due to cumulative KV caching, limiting practical deployment. We observe a scale-depth asymmetric dependency in VAR: early scales exhibit extreme sensitivity to network depth, while later scales remain robust to depth reduction. Inspired by this, we propose VARiant: by equidistant sampling, we select multiple subnets ranging from 16 to 2 layers from the original 30-layer VAR-d30 network. Early scales are processed by the full network, while later scales utilize subnet. Subnet and the full network share weights, enabling flexible depth adjustment within a single model. However, weight sharing between subnet and the entire network can lead to optimization conflicts. To address this, we propose a progressive training strategy that breaks through the Pareto frontier of generation quality for both subnets and the full network under fixed-ratio training, achieving joint optimality. Experiments on ImageNet demonstrate that, compared to the pretrained VAR-d30 (FID 1.95), VARiant-d16 and VARiant-d8 achieve nearly equivalent quality (FID 2.05/2.12) while reducing memory consumption by 40-65%. VARiant-d2 achieves 3.5 times speedup and 80% memory reduction at moderate quality cost (FID 2.97). In terms of deployment, VARiant's single-model architecture supports zero-cost runtime depth switching and provides flexible deployment options from high quality to extreme efficiency, catering to diverse application scenarios.

We propose VDN-NeRF, a method to train neural radiance fields (NeRFs) for better geometry under non-Lambertian surface and dynamic lighting conditions that cause significant variation in the radiance of a point when viewed from different angles. Instead of explicitly modeling the underlying factors that result in the view-dependent phenomenon, which could be complex yet not inclusive, we develop a simple and effective technique that normalizes the view-dependence by distilling invariant information already encoded in the learned NeRFs. We then jointly train NeRFs for view synthesis with view-dependence normalization to attain quality geometry. Our experiments show that even though shape-radiance ambiguity is inevitable, the proposed normalization can minimize its effect on geometry, which essentially aligns the optimal capacity needed for explaining view-dependent variations. Our method applies to various baselines and significantly improves geometry without changing the volume rendering pipeline, even if the data is captured under a moving light source. Code is available at: https://github.com/BoifZ/VDN-NeRF.

Modern robotic manipulation primarily relies on visual observations in a 2D color space for skill learning but suffers from poor generalization. In contrast, humans, living in a 3D world, depend more on physical properties-such as distance, size, and shape-than on texture when interacting with objects. Since such 3D geometric information can be acquired from widely available depth cameras, it appears feasible to endow robots with similar perceptual capabilities. Our pilot study found that using depth cameras for manipulation is challenging, primarily due to their limited accuracy and susceptibility to various types of noise. In this work, we propose Camera Depth Models (CDMs) as a simple plugin on daily-use depth cameras, which take RGB images and raw depth signals as input and output denoised, accurate metric depth. To achieve this, we develop a neural data engine that generates high-quality paired data from simulation by modeling a depth camera's noise pattern. Our results show that CDMs achieve nearly simulation-level accuracy in depth prediction, effectively bridging the sim-to-real gap for manipulation tasks. Notably, our experiments demonstrate, for the first time, that a policy trained on raw simulated depth, without the need for adding noise or real-world fine-tuning, generalizes seamlessly to real-world robots on two challenging long-horizon tasks involving articulated, reflective, and slender objects, with little to no performance degradation. We hope our findings will inspire future research in utilizing simulation data and 3D information in general robot policies.

3D data simulation aims to bridge the gap between simulated and real-captured 3D data, which is a fundamental problem for real-world 3D visual tasks. Most 3D data simulation methods inject predefined physical priors but struggle to capture the full complexity of real data. An optimal approach involves learning an implicit mapping from synthetic to realistic data in a data-driven manner, but progress in this solution has met stagnation in recent studies. This work explores a new solution path of data-driven 3D simulation, called Stable-Sim2Real, based on a novel two-stage depth diffusion model. The initial stage finetunes Stable-Diffusion to generate the residual between the real and synthetic paired depth, producing a stable but coarse depth, where some local regions may deviate from realistic patterns. To enhance this, both the synthetic and initial output depth are fed into a second-stage diffusion, where diffusion loss is adjusted to prioritize these distinct areas identified by a 3D discriminator. We provide a new benchmark scheme to evaluate 3D data simulation methods. Extensive experiments show that training the network with the 3D simulated data derived from our method significantly enhances performance in real-world 3D visual tasks. Moreover, the evaluation demonstrates the high similarity between our 3D simulated data and real-captured patterns. Project page: https://mutianxu.github.io/stable-sim2real/.

RGB video object tracking is a fundamental task in computer vision. Its effectiveness can be improved using depth information, particularly for handling motion-blurred target. However, depth information is often missing in commonly used tracking benchmarks. In this work, we propose a new framework that leverages monocular depth estimation to counter the challenges of tracking targets that are out of view or affected by motion blur in RGB video sequences. Specifically, our work introduces following contributions. To the best of our knowledge, we are the first to propose a depth attention mechanism and to formulate a simple framework that allows seamlessly integration of depth information with state of the art tracking algorithms, without RGB-D cameras, elevating accuracy and robustness. We provide extensive experiments on six challenging tracking benchmarks. Our results demonstrate that our approach provides consistent gains over several strong baselines and achieves new SOTA performance. We believe that our method will open up new possibilities for more sophisticated VOT solutions in real-world scenarios. Our code and models are publicly released: https://github.com/LiuYuML/Depth-Attention.

Reinforcement learning with verifiable rewards (RLVR) improves vision-language benchmark scores even without visual information during training. With images at test, blind-trained models recover roughly half of the real-image gain at 3B and nearly four fifths at 7B. Prolonged real-image training can erode grounding while benchmark gains persist. Both findings expose the same gap: an image in the prompt is not an image in the learning signal. Our design rule, visual resolvability, asks that visual evidence be necessary for a correct answer and that the task remain learnable. We test it on counterfactual coordinate scenes in which the question stays fixed and the target is never named, so a correct answer requires finding the target in the image. With standard GRPO and correctness-and-format rewards, a 7B model raises its accuracy at finding the target (discovery) from 0.425 to 0.875 on held-out scenes denser than any it trained on, and it improves on question types it never trained on. Two controls locate the source of the gain. Replacing test images with gray canvases drops discovery to zero; training on gray canvases instead, at matched step 30 and in each of four seeds, yields essentially none of the gain even when the model is then tested with real images. The learned skill carries over to grounding tasks built independently of the training corpus. A caption that answers the training question, added to the same images, reward and budget, cuts the gain by nearly two thirds. Changing what reward requires changes what RL learns.

This work addresses the challenge of video depth estimation, which expects not only per-frame accuracy but, more importantly, cross-frame consistency. Instead of directly developing a depth estimator from scratch, we reformulate the prediction task into a conditional generation problem. This allows us to leverage the prior knowledge embedded in existing video generation models, thereby reducing learn- ing difficulty and enhancing generalizability. Concretely, we study how to tame the public Stable Video Diffusion (SVD) to predict reliable depth from input videos using a mixture of image depth and video depth datasets. We empirically confirm that a procedural training strategy - first optimizing the spatial layers of SVD and then optimizing the temporal layers while keeping the spatial layers frozen - yields the best results in terms of both spatial accuracy and temporal consistency. We further examine the sliding window strategy for inference on arbitrarily long videos. Our observations indicate a trade-off between efficiency and performance, with a one-frame overlap already producing favorable results. Extensive experimental results demonstrate the superiority of our approach, termed ChronoDepth, over existing alternatives, particularly in terms of the temporal consistency of the estimated depth. Additionally, we highlight the benefits of more consistent video depth in two practical applications: depth-conditioned video generation and novel view synthesis. Our project page is available at https://jhaoshao.github.io/ChronoDepth/{this http URL}.

Despite recent advances in Monocular Depth Estimation, state-of-the-art depth foundation models remain vulnerable to robustness issues. Particularly, even slight camera rolls can result in substantial degradation in depth estimations. We attribute this problem to a previously overlooked phenomenon, termed the Horizontal Prior, which is a manifestation of long-tailed distribution bias: most training images are captured in approximately horizontal orientations due to human visual preferences and photographic habits. While intuitive remedies such as re-balanced data augmentation and horizon leveling provide partial improvements, they fail to fully address the issue. In this paper, we introduce Invariant Depth Constraint (ID-Constraint), a training-time supervision strategy that improves roll robustness by fine-tuning and jointly regularizing the depth backbone with a series of geometric and spatial reasoning tasks. These auxiliary objectives encourage the backbone to learn rotation-stable, depth-relevant representations, while the auxiliary prediction heads are discarded after training, leaving the original inference architecture unchanged. Extensive experiments on five benchmark datasets across four roll settings demonstrate the effectiveness of the proposed method.

Machine learning requires data, but acquiring and labeling real-world data is challenging, expensive, and time-consuming. More importantly, it is nearly impossible to alter real data post-acquisition (e.g., change the illumination of a room), making it very difficult to measure how specific properties of the data affect performance. In this paper, we present AI Playground (AIP), an open-source, Unreal Engine-based tool for generating and labeling virtual image data. With AIP, it is trivial to capture the same image under different conditions (e.g., fidelity, lighting, etc.) and with different ground truths (e.g., depth or surface normal values). AIP is easily extendable and can be used with or without code. To validate our proposed tool, we generated eight datasets of otherwise identical but varying lighting and fidelity conditions. We then trained deep neural networks to predict (1) depth values, (2) surface normals, or (3) object labels and assessed each network's intra- and cross-dataset performance. Among other insights, we verified that sensitivity to different settings is problem-dependent. We confirmed the findings of other studies that segmentation models are very sensitive to fidelity, but we also found that they are just as sensitive to lighting. In contrast, depth and normal estimation models seem to be less sensitive to fidelity or lighting and more sensitive to the structure of the image. Finally, we tested our trained depth-estimation networks on two real-world datasets and obtained results comparable to training on real data alone, confirming that our virtual environments are realistic enough for real-world tasks.

Residual connections with PreNorm are standard in modern LLMs, yet they accumulate all layer outputs with fixed unit weights. This uniform aggregation causes uncontrolled hidden-state growth with depth, progressively diluting each layer's contribution. We propose Attention Residuals (AttnRes), which replaces this fixed accumulation with softmax attention over preceding layer outputs, allowing each layer to selectively aggregate earlier representations with learned, input-dependent weights. To address the memory and communication overhead of attending over all preceding layer outputs for large-scale model training, we introduce Block AttnRes, which partitions layers into blocks and attends over block-level representations, reducing the memory footprint while preserving most of the gains of full AttnRes. Combined with cache-based pipeline communication and a two-phase computation strategy, Block AttnRes becomes a practical drop-in replacement for standard residual connections with minimal overhead. Scaling law experiments confirm that the improvement is consistent across model sizes, and ablations validate the benefit of content-dependent depth-wise selection. We further integrate AttnRes into the Kimi Linear architecture (48B total / 3B activated parameters) and pre-train on 1.4T tokens, where AttnRes mitigates PreNorm dilution, yielding more uniform output magnitudes and gradient distribution across depth, and improves downstream performance across all evaluated tasks.

This paper is the second in the series Commutative Scaling of Width and Depth (WD) about commutativity of infinite width and depth limits in deep neural networks. Our aim is to understand the behaviour of neural functions (functions that depend on a neural network model) as width and depth go to infinity (in some sense), and eventually identify settings under which commutativity holds, i.e. the neural function tends to the same limit no matter how width and depth limits are taken. In this paper, we formally introduce and define the commutativity framework, and discuss its implications on neural network design and scaling. We study commutativity for the neural covariance kernel which reflects how network layers separate data. Our findings extend previous results established in [55] by showing that taking the width and depth to infinity in a deep neural network with skip connections, when branches are suitably scaled to avoid exploding behaviour, result in the same covariance structure no matter how that limit is taken. This has a number of theoretical and practical implications that we discuss in the paper. The proof techniques in this paper are novel and rely on tools that are more accessible to readers who are not familiar with stochastic calculus (used in the proofs of WD(I))).

We propose a 3D latent representation that jointly models object geometry and view-dependent appearance. Most prior works focus on either reconstructing 3D geometry or predicting view-independent diffuse appearance, and thus struggle to capture realistic view-dependent effects. Our approach leverages that RGB-depth images provide samples of a surface light field. By encoding random subsamples of this surface light field into a compact set of latent vectors, our model learns to represent both geometry and appearance within a unified 3D latent space. This representation reproduces view-dependent effects such as specular highlights and Fresnel reflections under complex lighting. We further train a latent flow matching model on this representation to learn its distribution conditioned on a single input image, enabling the generation of 3D objects with appearances consistent with the lighting and materials in the input. Experiments show that our approach achieves higher visual quality and better input fidelity than existing methods.

Structured pruning of modern large language models (LLMs) has emerged as a way of decreasing their high computational needs. Width pruning reduces the size of projection weight matrices (e.g., by removing attention heads) while maintaining the number of layers. Depth pruning, in contrast, removes entire layers or blocks, while keeping the size of the remaining weights unchanged. Most current research focuses on either width-only or a blend of width and depth pruning, with little comparative analysis between the two units (width vs. depth) concerning their impact on LLM inference efficiency. In this work, we show that a simple depth pruning approach can compete with recent width pruning methods in terms of zero-shot task performance. Our pruning method boosts inference speeds, especially under memory-constrained conditions that require limited batch sizes for running LLMs, where width pruning is ineffective. We hope this work can help deploy LLMs on local and edge devices.

To process novel sentences, language models (LMs) must generalize compositionally -- combine familiar elements in new ways. What aspects of a model's structure promote compositional generalization? Focusing on transformers, we test the hypothesis, motivated by recent theoretical and empirical work, that transformers generalize more compositionally when they are deeper (have more layers). Because simply adding layers increases the total number of parameters, confounding depth and size, we construct three classes of models which trade off depth for width such that the total number of parameters is kept constant (41M, 134M and 374M parameters). We pretrain all models as LMs and fine-tune them on tasks that test for compositional generalization. We report three main conclusions: (1) after fine-tuning, deeper models generalize better out-of-distribution than shallower models do, but the relative benefit of additional layers diminishes rapidly; (2) within each family, deeper models show better language modeling performance, but returns are similarly diminishing; (3) the benefits of depth for compositional generalization cannot be attributed solely to better performance on language modeling or on in-distribution data.

Missing values remain a common challenge for depth data across its wide range of applications, stemming from various causes like incomplete data acquisition and perspective alteration. This work bridges this gap with DepthLab, a foundation depth inpainting model powered by image diffusion priors. Our model features two notable strengths: (1) it demonstrates resilience to depth-deficient regions, providing reliable completion for both continuous areas and isolated points, and (2) it faithfully preserves scale consistency with the conditioned known depth when filling in missing values. Drawing on these advantages, our approach proves its worth in various downstream tasks, including 3D scene inpainting, text-to-3D scene generation, sparse-view reconstruction with DUST3R, and LiDAR depth completion, exceeding current solutions in both numerical performance and visual quality. Our project page with source code is available at https://johanan528.github.io/depthlab_web/.

Self-improving LLM agents refine answers, not the process that produces those answers. Systems that add a meta-level hold that level fixed, and those that edit themselves must leave part of their own editing machinery untouched to stay stable, capping the meta-depth they realize at roughly two. We present Meta^n, which keeps the meta-operation fixed and recurses on its input instead. That operation, Ω, is applied repeatedly to its own products, reading the traces of the solver stack below together with the code that produced them, then writing the next layer as a strategic pre-process and a library of callable helpers. Because Ω never changes, it cannot destabilize the system, and because its input strictly grows, each layer reasons from a higher vantage than the last. Depth is set by convergence rather than fixed in advance, and an evolutionary archive searches over layer chains. Across two backbones, Meta^n outperforms prior self-improving agents on all eight benchmark families. The sharpest case is ARC-AGI-2, built to resist skill memorization, where it alone scores above zero. Ablations indicate that most of the gain from recursion comes from the conditioning each layer passes to the next, and distinct layer roles emerge with depth although no prompt prescribes them. Code available at https://github.com/minnesotanlp/meta-n

Deep randomized models fix hidden-layer parameters through random initialization and learn only closed-form readouts, typically adding depth by stacking random trans formations without target-aware control of hidden-state evolution. We propose LAIR Net, the Leaky Alignment-Impulse Residual Network, which mixes a shallow learned anchor into each hidden state through a leaky residual transition. We derive a depth uniform bound on input-perturbation sensitivity and use controlled simulations to attribute gains over a randomized baseline to the anchor rather than recursion or added capacity. Benefits emerge when a nonlinear target structure is learnable at the available noise level and diminish for nearly linear targets or dominant noise. Across 23 benchmark datasets, LAIR-Net achieves the best average rank among eight randomized networks and twelve conventional models, with relative performance associated with the same nonlinear-structure and noise quantities identified in simulation.

Recently, there has been growing evidence that if the width and depth of a neural network are scaled toward the so-called rich feature learning limit (muP and its depth extension), then some hyperparameters - such as the learning rate - exhibit transfer from small to very large models, thus reducing the cost of hyperparameter tuning. From an optimization perspective, this phenomenon is puzzling, as it implies that the loss landscape is remarkably consistent across very different model sizes. In this work, we find empirical evidence that learning rate transfer can be attributed to the fact that under muP and its depth extension, the largest eigenvalue of the training loss Hessian (i.e. the sharpness) is largely independent of the width and depth of the network for a sustained period of training time. On the other hand, we show that under the neural tangent kernel (NTK) regime, the sharpness exhibits very different dynamics at different scales, thus preventing learning rate transfer. But what causes these differences in the sharpness dynamics? Through a connection between the spectra of the Hessian and the NTK matrix, we argue that the cause lies in the presence (for muP) or progressive absence (for the NTK regime) of feature learning, which results in a different evolution of the NTK, and thus of the sharpness. We corroborate our claims with a substantial suite of experiments, covering a wide range of datasets and architectures: from ResNets and Vision Transformers trained on benchmark vision datasets to Transformers-based language models trained on WikiText

A dense, pretrained language model can be retrofitted with recurrent depth and learn an iterative latent transition that persists after outcome-only annealing. Qwen2.5-0.5B-Instruct is split into a Prelude, a weight-tied Recurrent Block, and a Coda, with an identity-preserving one-loop path and a re-entry bridge on later loops. At loop 1 the retrofit remains non-inferior to its base on a preregistered ARC battery. Three findings. First, the mechanism is a reusable procedure rather than terminal-answer lookup, and installs at two budgets: 6M trained parameters over frozen base weights and 180M full-block. With intermediate-step supervision, the model computes one task step per loop and persists when only final answers are graded. The adapter matched the full block overall (83.8% versus 84.0%), led through depth 11, and trailed beyond. Verbal fine-tuning reached 79-86% on controlled verbal renderings (zero-shot transfer was minimal), and adapter verbal training begun from the installed mechanism outpaced matched fresh training by 18.6 points, including on a held-out test set. Second, the operation extrapolates to roughly 1.5 times its supervised depth, holding 70% accuracy through depth 18. Third, a same-size scratchpad-trained model matched the recurrent model within its learned horizon but collapsed beyond it. The recurrent model won overall, 84% versus 72%, retained 53% versus 2.5% beyond depth 10, and answered 7.6 times faster. An iterative transformer can therefore perform deeper reasoning in latent space faster than comparable or larger models fine-tuned on the same task, in a system-level comparison. A second task, running the rule in reverse, exposed the limits: the inverse was learnable in isolation, but no continuation acquired it while preserving the installed mechanism and general capability, a catastrophic-interference boundary. Learned depth selection remains open.

Latent world models enable planning by predicting the effects of actions in a learned representation space, but their predictions can become unreliable when test-time conditions differ from training. Existing test-time adaptation methods address this by updating parts of the pretrained model, often modifying millions of parameters and requiring a choice of which internal components to adapt. We introduce Sandwich-Residuals, a lightweight alternative that keeps the pretrained world model frozen and learns only small residual corrections around the predictor. The residuals are optimized online using the model's self-supervised prediction error and require no rewards, labels, or source-domain data. Across 21 conditions on the AdaJEPA benchmark, our method achieves 1.3times the success rate of the frozen model while retaining 95% of the performance of the strongest AdaJEPA variant and adapting 97-99% fewer parameters. Under compound shifts, this advantage increases to 1.9times the success rate of the frozen model, while remaining comparable to internal block adaptation. We further demonstrate the same adaptation principle on a DINO-WM model for 3-D manipulation. These results suggest that effective test-time adaptation of world models does not necessarily require modifying their pretrained internal weights.

Depth-recurrence facilitates latent reasoning by sharing parameters across depths. However, prior work lacks combined FLOP-, parameter-, and memory-matched baselines, underutilizes depth-recurrence due to partially fixed layer stacks, and ignores the bottleneck of constant hidden-sizes that restricts many-step latent reasoning. To address this, we introduce a modular framework of depth-recurrent attention mixtures (Dreamer), combining sequence attention, depth attention, and sparse expert attention. It alleviates the hidden-size bottleneck through attention along depth, decouples scaling dimensions, and allows depth-recurrent models to scale efficiently and effectively. Across language reasoning benchmarks, our models require 2 to 8x fewer training tokens for the same accuracy as FLOP-, parameter-, and memory-matched SOTA, and outperform ca. 2x larger SOTA models with the same training tokens. We further present insights into knowledge usage across depths, e.g., showing 2 to 11x larger expert selection diversity than SOTA MoEs.

The success of monocular depth estimation relies on large and diverse training sets. Due to the challenges associated with acquiring dense ground-truth depth across different environments at scale, a number of datasets with distinct characteristics and biases have emerged. We develop tools that enable mixing multiple datasets during training, even if their annotations are incompatible. In particular, we propose a robust training objective that is invariant to changes in depth range and scale, advocate the use of principled multi-objective learning to combine data from different sources, and highlight the importance of pretraining encoders on auxiliary tasks. Armed with these tools, we experiment with five diverse training datasets, including a new, massive data source: 3D films. To demonstrate the generalization power of our approach we use zero-shot cross-dataset transfer}, i.e. we evaluate on datasets that were not seen during training. The experiments confirm that mixing data from complementary sources greatly improves monocular depth estimation. Our approach clearly outperforms competing methods across diverse datasets, setting a new state of the art for monocular depth estimation. Some results are shown in the supplementary video at https://youtu.be/D46FzVyL9I8

Recent work showed that large diffusion models can be reused as highly precise monocular depth estimators by casting depth estimation as an image-conditional image generation task. While the proposed model achieved state-of-the-art results, high computational demands due to multi-step inference limited its use in many scenarios. In this paper, we show that the perceived inefficiency was caused by a flaw in the inference pipeline that has so far gone unnoticed. The fixed model performs comparably to the best previously reported configuration while being more than 200times faster. To optimize for downstream task performance, we perform end-to-end fine-tuning on top of the single-step model with task-specific losses and get a deterministic model that outperforms all other diffusion-based depth and normal estimation models on common zero-shot benchmarks. We surprisingly find that this fine-tuning protocol also works directly on Stable Diffusion and achieves comparable performance to current state-of-the-art diffusion-based depth and normal estimation models, calling into question some of the conclusions drawn from prior works.

Fully-connected deep neural networks with weights initialized from independent Gaussian distributions can be tuned to criticality, which prevents the exponential growth or decay of signals propagating through the network. However, such networks still exhibit fluctuations that grow linearly with the depth of the network, which may impair the training of networks with width comparable to depth. We show analytically that rectangular networks with tanh activations and weights initialized from the ensemble of orthogonal matrices have corresponding preactivation fluctuations which are independent of depth, to leading order in inverse width. Moreover, we demonstrate numerically that, at initialization, all correlators involving the neural tangent kernel (NTK) and its descendants at leading order in inverse width -- which govern the evolution of observables during training -- saturate at a depth of sim 20, rather than growing without bound as in the case of Gaussian initializations. We speculate that this structure preserves finite-width feature learning while reducing overall noise, thus improving both generalization and training speed. We provide some experimental justification by relating empirical measurements of the NTK to the superior performance of deep nonlinear orthogonal networks trained under full-batch gradient descent on the MNIST and CIFAR-10 classification tasks.

Scaling laws predict how loss decreases with increases in computation. We show, contrary to conventional wisdom, that architectural interventions can modify scaling exponents in pre-training, leading to power-law improvements in performance as computation increases. As an anchoring point, we consider the architectural formulation of looped transformers. Although not typically used in this way, looping, also known as recursive depth, provides a mechanism for model growth, by increasing the number of loops during training. Model growth, with and without shared weights, provides the biggest changes to the scaling exponents. In particular, a 7.4B model growth architecture matches GPT-3 13B on CORE with roughly 20times less compute, and has compute efficiency gains that increase with scale. Moreover, simply using a boundary operator in a vanilla transformer, which normalizes and injects an earlier block, also provides an exponent increase, although to a lesser extent. In the data-constrained, multi-epoch setting, standard looping has a useful regularizing effect, where we find it is compute-optimal to increase the number of loops with scale. These results can be understood through the lens of computational depth: for a given computational budget, we wish to increase the usable depth of the transformer, which can lead to efficiency gains that increase with scale.

Progressive Learning (PL) reduces pre-training computational overhead by gradually increasing model scale. While prior work has extensively explored depth expansion, width expansion remains significantly understudied, with the few existing methods limited to the early stages of training. However, expanding width during the mid-stage is essential for maximizing computational savings, yet it remains a formidable challenge due to severe training instabilities. Empirically, we show that naive initialization at this stage disrupts activation statistics, triggering loss spikes, while copy-based initialization introduces gradient symmetry that hinders feature diversity. To address these issues, we propose SPARKLING (balancing {S}ignal {P}reservation {A}nd symmet{R}y brea{K}ing for width-progressive {L}earn{ING}), a novel framework for mid-stage width expansion. Our method achieves signal preservation via RMS-scale consistency, stabilizing activation statistics during expansion. Symmetry breaking is ensured through asymmetric optimizer state resetting and learning rate re-warmup. Extensive experiments on Mixture-of-Experts (MoE) models demonstrate that, across multiple width axes and optimizer families, SPARKLING consistently outperforms training from scratch and reduces training cost by up to 35% under 2times width expansion.

Recent work has made clear that the residual pathway is not mere optimization plumbing; it is part of the model's representational machinery. We agree, but argue that the cleanest way to organize this design space is through a two-axis view of the Transformer. A decoder evolves information along two ordered dimensions: sequence position and layer depth. Self-attention already provides adaptive mixing along the sequence axis, whereas the residual stream usually performs fixed addition along the depth axis. If we fix a token position and treat layer index as the ordered variable, then a causal depth-wise residual attention read is exactly the same local operator as causal short sliding-window attention (ShortSWA), except written over depth rather than over sequence. This is the core residual stream duality behind Transformer^2. This perspective also clarifies the recent literature. ELC-BERT and DenseFormer already show that learned aggregation over depth can outperform uniform residual accumulation, while Vertical Attention, DeepCrossAttention (DCA), MUDDFormer, and Attention Residuals move further toward explicit attention-based routing over earlier layers. The key point, however, is that operator-level duality does not imply systems-level symmetry. For large-scale autoregressive models, sequence-axis ShortSWA is usually the more hardware-friendly placement because it reuses token-side sliding-window kernels, KV-cache layouts, and chunked execution. If the goal is instead to change the shortcut itself, Deep Delta Learning (DDL) is the cleaner intervention because it modifies the residual operator directly rather than adding a separate cross-layer retrieval path. Our recommendation is therefore simple: use DDL when the shortcut is the object of interest, and use sequence-axis ShortSWA when the goal is local adaptive mixing.

Batch Normalization is a commonly used trick to improve the training of deep neural networks. These neural networks use L2 regularization, also called weight decay, ostensibly to prevent overfitting. However, we show that L2 regularization has no regularizing effect when combined with normalization. Instead, regularization has an influence on the scale of weights, and thereby on the effective learning rate. We investigate this dependence, both in theory, and experimentally. We show that popular optimization methods such as ADAM only partially eliminate the influence of normalization on the learning rate. This leads to a discussion on other ways to mitigate this issue.

Recent studies have observed that intermediate layers of foundation models often yield more discriminative representations than the final layer. While initially attributed to autoregressive pretraining, this phenomenon has also been identified in models trained via supervised and discriminative self-supervised objectives. In this paper, we conduct a comprehensive study to analyze the behavior of intermediate layers in pretrained vision transformers. Through extensive linear probing experiments across a diverse set of image classification benchmarks, we find that distribution shift between pretraining and downstream data is the primary cause of performance degradation in deeper layers. Furthermore, we perform a fine-grained analysis at the module level. Our findings reveal that standard probing of transformer block outputs is suboptimal; instead, probing the activation within the feedforward network yields the best performance under significant distribution shift, whereas the normalized output of the multi-head self-attention module is optimal when the shift is weak.

The purported "black box" nature of neural networks is a barrier to adoption in applications where interpretability is essential. Here we present DeepLIFT (Deep Learning Important FeaTures), a method for decomposing the output prediction of a neural network on a specific input by backpropagating the contributions of all neurons in the network to every feature of the input. DeepLIFT compares the activation of each neuron to its 'reference activation' and assigns contribution scores according to the difference. By optionally giving separate consideration to positive and negative contributions, DeepLIFT can also reveal dependencies which are missed by other approaches. Scores can be computed efficiently in a single backward pass. We apply DeepLIFT to models trained on MNIST and simulated genomic data, and show significant advantages over gradient-based methods. Video tutorial: http://goo.gl/qKb7pL, ICML slides: bit.ly/deeplifticmlslides, ICML talk: https://vimeo.com/238275076, code: http://goo.gl/RM8jvH.

Supervised fine-tuning (SFT) on chain-of-thought (CoT) trajectories demonstrations is a common approach for enabling reasoning in large language models. Standard practices typically only retain trajectories with correct final answers (positives) while ignoring the rest (negatives). We argue that this paradigm discards substantial supervision and exacerbates overfitting, limiting out-of-domain (OOD) generalization. Specifically, we surprisingly find that incorporating negative trajectories into SFT yields substantial OOD generalization gains over positive-only training, as these trajectories often retain valid intermediate reasoning despite incorrect final answers. To understand this effect in depth, we systematically analyze data, training dynamics, and inference behavior, identifying 22 recurring patterns in negative chains that serve a dual role: they moderate loss descent to mitigate overfitting during training and boost policy entropy by 35.67% during inference to facilitate exploration. Motivated by these observations, we further propose Gain-based LOss Weighting (GLOW), an adaptive, sample-aware scheme that exploits such distinctive training dynamics by rescaling per-sample loss based on inter-epoch progress. Empirically, GLOW efficiently leverages unfiltered trajectories, yielding a 5.51% OOD gain over positive-only SFT on Qwen2.5-7B and boosting MMLU from 72.82% to 76.47% as an RL initialization.

Despite the widespread practical success of deep learning methods, our theoretical understanding of the dynamics of learning in deep neural networks remains quite sparse. We attempt to bridge the gap between the theory and practice of deep learning by systematically analyzing learning dynamics for the restricted case of deep linear neural networks. Despite the linearity of their input-output map, such networks have nonlinear gradient descent dynamics on weights that change with the addition of each new hidden layer. We show that deep linear networks exhibit nonlinear learning phenomena similar to those seen in simulations of nonlinear networks, including long plateaus followed by rapid transitions to lower error solutions, and faster convergence from greedy unsupervised pretraining initial conditions than from random initial conditions. We provide an analytical description of these phenomena by finding new exact solutions to the nonlinear dynamics of deep learning. Our theoretical analysis also reveals the surprising finding that as the depth of a network approaches infinity, learning speed can nevertheless remain finite: for a special class of initial conditions on the weights, very deep networks incur only a finite, depth independent, delay in learning speed relative to shallow networks. We show that, under certain conditions on the training data, unsupervised pretraining can find this special class of initial conditions, while scaled random Gaussian initializations cannot. We further exhibit a new class of random orthogonal initial conditions on weights that, like unsupervised pre-training, enjoys depth independent learning times. We further show that these initial conditions also lead to faithful propagation of gradients even in deep nonlinear networks, as long as they operate in a special regime known as the edge of chaos.

We present a novel approach designed to address the complexities posed by challenging, out-of-distribution data in the single-image depth estimation task. Starting with images that facilitate depth prediction due to the absence of unfavorable factors, we systematically generate new, user-defined scenes with a comprehensive set of challenges and associated depth information. This is achieved by leveraging cutting-edge text-to-image diffusion models with depth-aware control, known for synthesizing high-quality image content from textual prompts while preserving the coherence of 3D structure between generated and source imagery. Subsequent fine-tuning of any monocular depth network is carried out through a self-distillation protocol that takes into account images generated using our strategy and its own depth predictions on simple, unchallenging scenes. Experiments on benchmarks tailored for our purposes demonstrate the effectiveness and versatility of our proposal.

Depth enhancement, which uses RGB images as guidance to convert raw signals from dToF into high-precision, dense depth maps, is a critical task in computer vision. Although existing super-resolution-based methods show promising results on public datasets, they often rely on idealized assumptions like accurate region correspondences and reliable dToF inputs, overlooking calibration errors that cause misalignment and anomaly signals inherent to dToF imaging, limiting real-world applicability. To address these challenges, we propose a novel completion-based method, named DEPTHOR, featuring advances in both the training strategy and model architecture. First, we propose a method to simulate real-world dToF data from the accurate ground truth in synthetic datasets to enable noise-robust training. Second, we design a novel network that incorporates monocular depth estimation (MDE), leveraging global depth relationships and contextual information to improve prediction in challenging regions. On the ZJU-L5 dataset, our training strategy significantly enhances depth completion models, achieving results comparable to depth super-resolution methods, while our model achieves state-of-the-art results, improving Rel and RMSE by 27% and 18%, respectively. On a more challenging set of dToF samples we collected, our method outperforms SOTA methods on preliminary stereo-based GT, improving Rel and RMSE by 23% and 22%, respectively. Our Code is available at https://github.com/ShadowBbBb/Depthor

While depth tends to improve network performances, it also makes gradient-based training more difficult since deeper networks tend to be more non-linear. The recently proposed knowledge distillation approach is aimed at obtaining small and fast-to-execute models, and it has shown that a student network could imitate the soft output of a larger teacher network or ensemble of networks. In this paper, we extend this idea to allow the training of a student that is deeper and thinner than the teacher, using not only the outputs but also the intermediate representations learned by the teacher as hints to improve the training process and final performance of the student. Because the student intermediate hidden layer will generally be smaller than the teacher's intermediate hidden layer, additional parameters are introduced to map the student hidden layer to the prediction of the teacher hidden layer. This allows one to train deeper students that can generalize better or run faster, a trade-off that is controlled by the chosen student capacity. For example, on CIFAR-10, a deep student network with almost 10.4 times less parameters outperforms a larger, state-of-the-art teacher network.

In this paper, we study depth perception of vision-language models (VLMs) to isolate the effects of pictorial depth cues and disentangle vision and language influences on model performance. To this end, we combine depth-ordering and odd-one-out psychophysical tasks: the VLMs are presented with images where one object is at different depth relative to other, otherwise identical, objects, and must determine whether the odd-one-out target is closer or farther to the observer. To create stimuli, we generate 2D views from simulated and real 3D scenes while controlling the presence of individual pictorial depth cues, enabling a fine-grained analysis of cue-level contributions. Language effects are examined by varying referring expression clarity. We also introduce a novel metric to quantify vision-vs-language sensitivities. Applying this methodology, we create the Odd-One-Out Depth (O3-D) dataset with 37K real and synthetic images and 147K image-question pairs. Evaluation of 12 open-source and commercial models on O3-D shows under-utilization of depth cues and depth-ordering accuracies between 47% and 56%, with no model above chance level. At the same time, our metric reveals strong linguistic bias in the answers. Neither chain-of-thought (CoT) nor in-context learning (ICL) significantly improves performance, suggesting that static image data alone may be insufficient for depth understanding. All code, the image generation pipeline, and the O3-D dataset are publicly released at https://github.com/lyiqian/o3-d.

Scaling up self-supervised learning has driven breakthroughs in language and vision, yet comparable progress has remained elusive in reinforcement learning (RL). In this paper, we study building blocks for self-supervised RL that unlock substantial improvements in scalability, with network depth serving as a critical factor. Whereas most RL papers in recent years have relied on shallow architectures (around 2 - 5 layers), we demonstrate that increasing the depth up to 1024 layers can significantly boost performance. Our experiments are conducted in an unsupervised goal-conditioned setting, where no demonstrations or rewards are provided, so an agent must explore (from scratch) and learn how to maximize the likelihood of reaching commanded goals. Evaluated on simulated locomotion and manipulation tasks, our approach increases performance on the self-supervised contrastive RL algorithm by 2times - 50times, outperforming other goal-conditioned baselines. Increasing the model depth not only increases success rates but also qualitatively changes the behaviors learned. The project webpage and code can be found here: https://wang-kevin3290.github.io/scaling-crl/.

We show that taking the width and depth to infinity in a deep neural network with skip connections, when branches are scaled by 1/depth (the only nontrivial scaling), result in the same covariance structure no matter how that limit is taken. This explains why the standard infinite-width-then-depth approach provides practical insights even for networks with depth of the same order as width. We also demonstrate that the pre-activations, in this case, have Gaussian distributions which has direct applications in Bayesian deep learning. We conduct extensive simulations that show an excellent match with our theoretical findings.

Several recent Transformer architectures expose later layers to representations computed in the earliest layers, motivated by the observation that low-level features can become harder to recover as the residual stream is repeatedly transformed through depth. The cheapest among these methods add static value residuals: learned mixing coefficients that expose the first-layer value projection V_1 uniformly across tokens and heads. More expressive dense or dynamic alternatives recover finer-grained access, but at higher memory cost and lower throughput. The usefulness of V_1 is unlikely to be constant across tokens, heads, and contexts; different positions plausibly require different amounts of access to early lexical or semantic information. We therefore treat early-representation reuse as a retrieval problem rather than a connectivity problem, and introduce Selective Access Transformer (SATFormer), which preserves the first-layer value pathway while controlling access with a context-dependent gate. Across models from 130M to 1.3B parameters, SATFormer consistently improves validation loss and zero-shot accuracy over the static value-residual and Transformer baselines. Its strongest gains appear on retrieval-intensive benchmarks, where it improves over static value residuals by approximately 1.5 average points, while maintaining throughput and memory usage close to the baseline Transformer. Gate analyses suggest sparse, depth-dependent, head-specific, and category-sensitive access patterns, supporting the interpretation that SATFormer learns selective reuse of early representations rather than uniform residual copying. Our code is available at https://github.com/SkyeGunasekaran/SATFormer.

Recursive self-improvement requires agents to turn accumulated experience into better future behavior. Personal AI agents offer a concrete setting for studying this capability because they retain preferences, task histories, tool routines, and learned skills across sessions. Yet whether retained experience actually improves them over time has not been systematically tested. We introduce PAST-Bench, a benchmark designed to isolate this question. Each agent runs through ordered sequences of fresh-session tasks under matched conditions that turn retained experience on and off. It spans 26 scenarios and 204 episodes across memory, procedural reuse, information gathering, and update. We report both later-task gains and whether those gains follow the intended save, retrieve, and update pathway. Across seven base models and four agent frameworks, improvement is real but uneven across capabilities. Agents with the same headline gain can differ markedly in whether that gain is supported by evidence of the intended pathway. Guided by these findings, we develop Hermes+, which extends Hermes with five targeted interventions across stages of the agent loop. Hermes+ raises the average gain from retained experience and provides clearer pathway evidence, with its strongest improvement on tasks requiring outdated state to be replaced, although the effect remains capability- and model-dependent. Together, PAST-Bench and Hermes+ provide an evaluation and diagnostic foundation for studying how persistent agents can progress from retaining experience to systematically improving through it. Code: https://github.com/Gen-Verse/PAST-Bench

Reasoning prefixes shape the future trajectory of LLM problem solving, yet existing process reward models usually evaluate them through local step correctness. We argue that correctness is a useful but indirect proxy for the effect we ultimately care about: whether a prefix increases the probability of successful completion. We define this effect as prefix gain, the solve-rate improvement induced by conditioning lightweight student model group on a prefix, and use it to train a Prefix Utility Model (PUM) with a simple pairwise ranking objective. PUM learns outcome-grounded prefix utility and can score both complete trajectories and partial reasoning prefixes. Across Best-of-N selection, beam search, and reinforcement learning on mathematical reasoning, PUM provides a strong prefix-level supervision signal, especially when candidate pools are large, search budgets increase, or rule-based rewards are sparse. We release all data, models, and code at https://zhiqix.github.io/pum-project-page.

Training a neural network requires choosing a suitable learning rate, which involves a trade-off between speed and effectiveness of convergence. While there has been considerable theoretical and empirical analysis of how large the learning rate can be, most prior work focuses only on late-stage training. In this work, we introduce the maximal initial learning rate eta^{ast} - the largest learning rate at which a randomly initialized neural network can successfully begin training and achieve (at least) a given threshold accuracy. Using a simple approach to estimate eta^{ast}, we observe that in constant-width fully-connected ReLU networks, eta^{ast} behaves differently from the maximum learning rate later in training. Specifically, we find that eta^{ast} is well predicted as a power of depth times width, provided that (i) the width of the network is sufficiently large compared to the depth, and (ii) the input layer is trained at a relatively small learning rate. We further analyze the relationship between eta^{ast} and the sharpness lambda_{1} of the network at initialization, indicating they are closely though not inversely related. We formally prove bounds for lambda_{1} in terms of depth times width that align with our empirical results.

In this paper, we propose Iris, a deterministic framework for Monocular Depth Estimation (MDE) that integrates real-world priors into the diffusion model. Conventional feed-forward methods rely on massive training data, yet still miss details. Previous diffusion-based methods leverage rich generative priors yet struggle with synthetic-to-real domain transfer. Iris, in contrast, preserves fine details, generalizes strongly from synthetic to real scenes, and remains efficient with limited training data. To this end, we introduce a two-stage Priors-to-Geometry Deterministic (PGD) schedule: the prior stage uses Spectral-Gated Distillation (SGD) to transfer low-frequency real priors while leaving high-frequency details unconstrained, and the geometry stage applies Spectral-Gated Consistency (SGC) to enforce high-frequency fidelity while refining with synthetic ground truth. The two stages share weights and are executed with a high-to-low timestep schedule. Extensive experimental results confirm that Iris achieves significant improvements in MDE performance with strong in-the-wild generalization.

Gradients can be employed for sensitivity analysis. Here, we leverage the advantages of the Loss Landscape to comprehend which independent variables impact the dependent variable. We seek to grasp the loss landscape by utilizing first, second, and third derivatives through automatic differentiation. we know that Spearman's rank correlation coefficient can detect the monotonic relationship between two variables. However, I have found that second-order gradients, with certain configurations and parameters, provide information that can be visualized similarly to Spearman results, In this approach, we incorporate a loss function with an activation function, resulting in a non-linear pattern. Each exploration of the loss landscape through retraining yields new valuable information. Furthermore, the first and third derivatives are also beneficial, as they indicate the extent to which independent variables influence the dependent variable.

LoRA-based continual learning methods mitigate catastrophic forgetting through various mechanisms, yet nearly all complement these with small learning rates as a heuristic to restrict gradient scaling magnitude. Such fixed heuristics lack theoretical guidance on how the strength of this restriction should evolve as tasks accumulate. We reveal that even under directional constraints such as nullspace projection, finite-precision updates inevitably leak into the subspace of accumulated prior knowledge along multiple directions. While small learning rates attenuate such leakage, they cannot prevent the accumulated forgetting from intensifying as the effective rank of historical knowledge grows. We show that the optimal magnitude restriction should adaptively increase with this effective rank to balance stability and plasticity, i.e., preservation of previous knowledge and acquisition of new task information. Under an anisotropic leakage model, we derive a pacing law s^*=R/c that characterizes the optimal scaling of gradient steps, i.e., the magnitude restriction itself, where R is the effective rank of past updates. Based on this insight, we propose PaLoRA, which compresses historical knowledge via adaptive SVD truncation, projects gradients onto the nullspace of prior tasks, and applies rank-aware adaptive pacing. Experiments demonstrate consistent improvements over prior methods, with particularly strong performance in long-horizon settings, achieving substantial gains of 4% accuracy on challenging 50-task ImageNet-A and ImageNet-R benchmarks.

Vision-Language-Action (VLA) models map observations to actions with no objective that accounts for how the world responds, so their robustness is bounded primarily by data coverage. World models carry precisely that missing objective and are better grounded for it, yet rolling the future forward costs seconds per decision and rules them out of the control loop. We show the two can be separated. What a world model knows about physical scenes lives in its internal features; generating the future is merely the objective that produced them, so the grounding can be inherited while the generative machinery is left behind. We add one feature-alignment term to ordinary VLA training: a frozen world model is run over the training frames once and cached, and the student learns to agree with that cache. No teacher is loaded during training, the projector is discarded after it, and the deployed policy is identical to the undistilled baseline, running in 32~ms and 1.86~GB on a consumer RTX~5090, so every gain is attributable to the representation rather than to added capacity or test-time compute. A 0.8B student reaches 97.9% on LIBERO, improves from 48.2% to 50.5% on RoboCasa-GR1 humanoid manipulation, and the same objective carries over to real hardware, on both a single-arm and a bimanual platform. The gain survives changes of student scale, backbone, alignment layer, and teacher, indicating a broad representational prior rather than a fragile alignment between two particular networks. Project page: https://thaw-vla.trung-dt.com/.

Neural scaling laws describe how pre-training loss decays as power laws with training time, model size, and compute. This position paper argues that the exponents of these power laws are fixed by generic mechanisms: a one-third time scaling due to the strong nonlinearity of Softmax, an inverse width scaling due to representational superposition, and an inverse depth scaling due to ensemble averaging of Transformer layers. These mechanisms are robust to a wide range of data structures and architectural details, placing current large language models in a universality class with fixed exponents. The coefficients, however, are expected to be sensitive to data and architecture details, and directly determine practical quantities such as the optimal model shape and the compute-optimal frontier. We therefore argue that understanding the coefficients is the key to near-term performance improvements, and that a closer examination of the current universality class may reveal pathways to better universality classes.

A prevailing view in Reinforcement Learning for Verifiable Rewards (RLVR) interprets recent progress through the lens of an exploration-exploitation trade-off, a perspective largely shaped by token-level metrics. We re-examine this perspective, proposing that this perceived trade-off may not be a fundamental constraint but rather an artifact of the measurement level. To investigate this, we shift the analysis to the semantically rich hidden-state space, adopting Effective Rank (ER) to quantify exploration and proposing its novel first- and second-order derivatives, named Effective Rank Velocity (ERV) and Effective Rank Acceleration (ERA), to capture exploitation dynamics. Our analysis reveals that at the hidden-state level, exploration and exploitation could be decoupled (Sec. 4). This finding reveals an opportunity to enhance both capacities simultaneously. This insight motivates our method, Velocity-Exploiting Rank-Learning (VERL), the first to operationalize the principle of synergistic exploration-exploitation enhancement by directly shaping the RL advantage function. The key innovation is leveraging the theoretically stable ERA as a predictive meta-controller to create a synergistic, dual-channel incentive structure. Instead of forcing a trade-off, VERL prospectively amplifies rewards for exploration to preempt overconfidence and reinforces exploitative gains to consolidate reasoning. Experiments across diverse LLMs and reasoning benchmarks show consistent gains, including up to 21.4% absolute accuracy improvement on the challenging Gaokao 2024 dataset.

The scaling of large language models (LLMs) emphasizes increasing depth, yet performance gains diminish with added layers. Prior work introduces the concept of "effective depth", arguing that deeper models fail to fully utilize their layers for meaningful computation. Building on this, we systematically study how effective depth varies with model scale, training type, and task difficulty. First, we analyze the model behavior of Qwen-2.5 family (1.5B-32B) and find that while the number of effective layers grows with model size, the effective depth ratio remains stable. Besides, comparisons between base and corresponding long-CoT models show no increase in effective depth, suggesting that improved reasoning stems from longer context rather than deeper per-token computation. Furthermore, evaluations across tasks of varying difficulty indicate that models do not dynamically use more layers for harder problems. Our results suggest that current LLMs underuse available depth across scales, training paradigms and tasks of varying difficulties, pointing out research opportunities on increasing the layer utilization rate of LLMs, model pruning, and early exiting. Our code is released at https://github.com/AheadOFpotato/what_affects_effective_depth.

We identify a new phenomenon in neural network optimization which arises from the interaction of depth and a particular heavy-tailed structure in natural data. Our result offers intuitive explanations for several previously reported observations about network training dynamics. In particular, it implies a conceptually new cause for progressive sharpening and the edge of stability; we also highlight connections to other concepts in optimization and generalization including grokking, simplicity bias, and Sharpness-Aware Minimization. Experimentally, we demonstrate the significant influence of paired groups of outliers in the training data with strong opposing signals: consistent, large magnitude features which dominate the network output throughout training and provide gradients which point in opposite directions. Due to these outliers, early optimization enters a narrow valley which carefully balances the opposing groups; subsequent sharpening causes their loss to rise rapidly, oscillating between high on one group and then the other, until the overall loss spikes. We describe how to identify these groups, explore what sets them apart, and carefully study their effect on the network's optimization and behavior. We complement these experiments with a mechanistic explanation on a toy example of opposing signals and a theoretical analysis of a two-layer linear network on a simple model. Our finding enables new qualitative predictions of training behavior which we confirm experimentally. It also provides a new lens through which to study and improve modern training practices for stochastic optimization, which we highlight via a case study of Adam versus SGD.

Recent Reinforcement Learning (RL) algorithms making use of Kullback-Leibler (KL) regularization as a core component have shown outstanding performance. Yet, only little is understood theoretically about why KL regularization helps, so far. We study KL regularization within an approximate value iteration scheme and show that it implicitly averages q-values. Leveraging this insight, we provide a very strong performance bound, the very first to combine two desirable aspects: a linear dependency to the horizon (instead of quadratic) and an error propagation term involving an averaging effect of the estimation errors (instead of an accumulation effect). We also study the more general case of an additional entropy regularizer. The resulting abstract scheme encompasses many existing RL algorithms. Some of our assumptions do not hold with neural networks, so we complement this theoretical analysis with an extensive empirical study.

Layer interventions are widely used to probe the internal organization of language models, yet most analyses examine a single training checkpoint even though model representations and computations evolve throughout pretraining. This leaves open which depth-dependent intervention responses reflect persistent organization and which are transient consequences of training. We study this question using single-block identity bypass on fixed teacher-forced contexts across five released trajectories and 11 model-domain combinations. We find that block-bypass responses retain recognizable depth ordering while their magnitudes redistribute: nearby checkpoints preserve stronger rank correspondence than distant ones, and large changes concentrate at positions that recur across text samples and transfer across evaluation domains. Controlled experiments further show that changes in the natural bypass effect cannot be reduced to a single downstream sensitivity: in replicated Pythia runs, local missing-update magnitude grows while the pooled matched downstream response decreases, whereas OLMo-2 7B exhibits a different balance. These matched responses also depend on perturbation strength and direction, without identifying targeted compensation. Together, our results show that longitudinal layer sensitivity is structured but not static, and that single-checkpoint intervention responses should be interpreted in the context of how the underlying perturbation pathway evolves during training.

Stereo depth estimation is fundamental to underwater robotic perception, yet suffers from severe domain shifts caused by wavelength-dependent light attenuation, scattering, and refraction. Recent approaches leverage monocular foundation models with GRU-based iterative refinement for underwater adaptation; however, the sequential gating and local convolutional kernels in GRUs necessitate multiple iterations for long-range disparity propagation, limiting performance in large-disparity and textureless underwater regions. In this paper, we propose StereoAdapter-2, which replaces the conventional ConvGRU updater with a novel ConvSS2D operator based on selective state space models. The proposed operator employs a four-directional scanning strategy that naturally aligns with epipolar geometry while capturing vertical structural consistency, enabling efficient long-range spatial propagation within a single update step at linear computational complexity. Furthermore, we construct UW-StereoDepth-80K, a large-scale synthetic underwater stereo dataset featuring diverse baselines, attenuation coefficients, and scattering parameters through a two-stage generative pipeline combining semantic-aware style transfer and geometry-consistent novel view synthesis. Combined with dynamic LoRA adaptation inherited from StereoAdapter, our framework achieves state-of-the-art zero-shot performance on underwater benchmarks with 17% improvement on TartanAir-UW and 7.2% improvment on SQUID, with real-world validation on the BlueROV2 platform demonstrates the robustness of our approach. Code: https://github.com/AIGeeksGroup/StereoAdapter-2. Website: https://aigeeksgroup.github.io/StereoAdapter-2.

In recent years, deep artificial neural networks (including recurrent ones) have won numerous contests in pattern recognition and machine learning. This historical survey compactly summarises relevant work, much of it from the previous millennium. Shallow and deep learners are distinguished by the depth of their credit assignment paths, which are chains of possibly learnable, causal links between actions and effects. I review deep supervised learning (also recapitulating the history of backpropagation), unsupervised learning, reinforcement learning & evolutionary computation, and indirect search for short programs encoding deep and large networks.

Many studies on scaling laws consider basic factors such as model size, model shape, dataset size, and compute power. These factors are easily tunable and represent the fundamental elements of any machine learning setup. But researchers have also employed more complex factors to estimate the test error and generalization performance with high predictability. These factors are generally specific to the domain or application. For example, feature diversity was primarily used for promoting syn-to-real transfer by Chen et al. (2021). With numerous scaling factors defined in previous works, it would be interesting to investigate how these factors may affect overall generalization performance in the context of self-supervised learning with CNN models. How do individual factors promote generalization, which includes varying depth, width, or the number of training epochs with early stopping? For example, does higher feature diversity result in higher accuracy held in complex settings other than a syn-to-real transfer? How do these factors depend on each other? We found that the last layer is the most diversified throughout the training. However, while the model's test error decreases with increasing epochs, its diversity drops. We also discovered that diversity is directly related to model width.

Visuomotor policy learning has witnessed substantial progress in robotic manipulation, with recent approaches predominantly relying on generative models to model the action distribution. However, these methods often overlook the critical coupling between visual perception and action prediction. In this work, we introduce Triply-Hierarchical Diffusion Policy~(H^{\mathbf{3}DP}), a novel visuomotor learning framework that explicitly incorporates hierarchical structures to strengthen the integration between visual features and action generation. H^{3}DP contains 3 levels of hierarchy: (1) depth-aware input layering that organizes RGB-D observations based on depth information; (2) multi-scale visual representations that encode semantic features at varying levels of granularity; and (3) a hierarchically conditioned diffusion process that aligns the generation of coarse-to-fine actions with corresponding visual features. Extensive experiments demonstrate that H^{3}DP yields a +27.5% average relative improvement over baselines across 44 simulation tasks and achieves superior performance in 4 challenging bimanual real-world manipulation tasks. Project Page: https://lyy-iiis.github.io/h3dp/.

Accurate depth estimation from monocular videos remains challenging due to ambiguities inherent in single-view geometry, as crucial depth cues like stereopsis are absent. However, humans often perceive relative depth intuitively by observing variations in the size and spacing of objects as they move. Inspired by this, we propose a novel method that infers relative depth by examining the spatial relationships and temporal evolution of a set of tracked 2D trajectories. Specifically, we use off-the-shelf point tracking models to capture 2D trajectories. Then, our approach employs spatial and temporal transformers to process these trajectories and directly infer depth changes over time. Evaluated on the TAPVid-3D benchmark, our method demonstrates robust zero-shot performance, generalizing effectively from synthetic to real-world datasets. Results indicate that our approach achieves temporally smooth, high-accuracy depth predictions across diverse domains.

This paper studies the prediction of a target z from a pair of random variables (x,y), where the ground-truth predictor is additive E[z mid x,y] = f_star(x) +g_{star}(y). We study the performance of empirical risk minimization (ERM) over functions f+g, f in F and g in G, fit on a given training distribution, but evaluated on a test distribution which exhibits covariate shift. We show that, when the class F is "simpler" than G (measured, e.g., in terms of its metric entropy), our predictor is more resilient to heterogenous covariate shifts in which the shift in x is much greater than that in y. These results rely on a novel H\"older style inequality for the Dudley integral which may be of independent interest. Moreover, we corroborate our theoretical findings with experiments demonstrating improved resilience to shifts in "simpler" features across numerous domains.

Depth estimation is a fundamental task in 3D computer vision, crucial for applications such as 3D reconstruction, free-viewpoint rendering, robotics, autonomous driving, and AR/VR technologies. Traditional methods relying on hardware sensors like LiDAR are often limited by high costs, low resolution, and environmental sensitivity, limiting their applicability in real-world scenarios. Recent advances in vision-based methods offer a promising alternative, yet they face challenges in generalization and stability due to either the low-capacity model architectures or the reliance on domain-specific and small-scale datasets. The emergence of scaling laws and foundation models in other domains has inspired the development of "depth foundation models": deep neural networks trained on large datasets with strong zero-shot generalization capabilities. This paper surveys the evolution of deep learning architectures and paradigms for depth estimation across the monocular, stereo, multi-view, and monocular video settings. We explore the potential of these models to address existing challenges and provide a comprehensive overview of large-scale datasets that can facilitate their development. By identifying key architectures and training strategies, we aim to highlight the path towards robust depth foundation models, offering insights into their future research and applications.

AI agents increasingly operate in environments where they can diagnose failures and improve through experience, yet existing evaluations largely measure what an agent can do at a fixed point in time rather than how effectively it learns. Evaluating self-improvement requires answering three questions: does future performance improve and generalize beyond the interactions that enabled learning; how efficiently are new capabilities acquired; and where does the self-improvement process break down? To answer these questions, we study self-improvement in a controlled setting where agents amortize past experience into reusable artifacts that are inherited by future instances. At each checkpoint, we measure performance on training and held-out environment interactions while accounting for learning cost. We introduce agent plasticity, the efficiency with which an agent converts experience into gains in future held-out performance. Across multiple environments, frontier models exhibit sharply different improvement trajectories despite comparable opportunities to learn. Some achieve substantial and persistent gains, while others remain near or below their initial performance, and gains within the training regime often transfer only partially to out-of-distribution conditions. Endpoint capability and acquisition efficiency also diverge: the agent that ultimately performs best need not be the one that improves most efficiently. Tracing failures through the improvement loop further reveals different candidate bottlenecks. Agents with low plasticity often fail to reuse relevant artifacts, whereas more plastic agents may still fail despite reusing relevant artifacts, pointing to limitations in artifact quality, generalization, or application. Evaluating self-improving agents requires measuring not only what they can do, but how effectively they become better through experience.

How strongly do the remaining diffusion-sampling steps amplify a perturbation at a late latent state? Standard measurements answer this question with newly sampled isotropic noise, even though perturbations encountered during sampling have already been transformed by earlier steps. We compare these two cases directly. For each trajectory, we transport a centered perturbation from an earlier step to a late state, then replay its direction at the same magnitude as a newly sampled isotropic perturbation; both then undergo the same remaining updates. Across the samplers we study, median paired shaped-to-fresh angular-gain ratios range from 1.14 to 2.35. Shaped angular gain exceeds its matched fresh counterpart in every trajectory in the original main cohorts. The same pattern appears when endpoint change is measured by latent RMS. The effect also appears in perceptual feature representations: earlier-sampling directions cause larger feature changes at the endpoint, even when the corresponding pixel-space change is comparable. Permuting shaped directions across trajectories weakens the effect, including within class, indicating that the advantage depends on alignment with the receiving trajectory as well as on shared directional structure.

Recent work identifies a mid-depth band of verbalisable, causally potent representations in a standard feedforward transformer --- a functional analogue of a global workspace. Whether the same workspace functionality emerges when depth is implemented through recurrence rather than a stack of distinct layers remains unknown. Looped and depth-recurrent transformers provide a direct test of this question because they reuse the same weights across depth. We extend the Jacobian lens to iterated architectures using a virtual-unrolling adapter. We apply the full workspace suite --- lens fitting, readout, and eleven causal experiment families --- to Ouro-2.6B (48 layers looped 4 times, deeply supervised) and Huginn-0125 (a 4-layer core recurred 16 times, trained for latent reasoning), using Qwen3.6-27B (64 untied layers) as the standard baseline. We find that a workspace forms in the iterated part of each architecture, but that recurrence changes how it can be accessed. Ouro reconstructs workspace content in every loop, and linear transport cannot carry that content across loop boundaries; writes and ablations must therefore span every remaining loop. Huginn carries content forward across all sixteen recurrences, while reads, writes, and ablations act only within a sliding window of roughly two recurrences. Whether newly injected content can be verbalised tracks explicit per-iteration supervision; whether existing content can be steered does not.

Large-scale pre-trained vision models are becoming increasingly prevalent, offering expressive and generalizable visual representations that benefit various downstream tasks. Recent studies on the emergent properties of these models have revealed their high-level geometric understanding, in particular in the context of depth perception. However, it remains unclear how depth perception arises in these models without explicit depth supervision provided during pre-training. To investigate this, we examine whether the monocular depth cues, similar to those used by the human visual system, emerge in these models. We introduce a new benchmark, DepthCues, designed to evaluate depth cue understanding, and present findings across 20 diverse and representative pre-trained vision models. Our analysis shows that human-like depth cues emerge in more recent larger models. We also explore enhancing depth perception in large vision models by fine-tuning on DepthCues, and find that even without dense depth supervision, this improves depth estimation. To support further research, our benchmark and evaluation code will be made publicly available for studying depth perception in vision models.

Depth completion upgrades sparse depth measurements into dense depth maps guided by a conventional image. Existing methods for this highly ill-posed task operate in tightly constrained settings and tend to struggle when applied to images outside the training domain or when the available depth measurements are sparse, irregularly distributed, or of varying density. Inspired by recent advances in monocular depth estimation, we reframe depth completion as an image-conditional depth map generation guided by sparse measurements. Our method, Marigold-DC, builds on a pretrained latent diffusion model for monocular depth estimation and injects the depth observations as test-time guidance via an optimization scheme that runs in tandem with the iterative inference of denoising diffusion. The method exhibits excellent zero-shot generalization across a diverse range of environments and handles even extremely sparse guidance effectively. Our results suggest that contemporary monocular depth priors greatly robustify depth completion: it may be better to view the task as recovering dense depth from (dense) image pixels, guided by sparse depth; rather than as inpainting (sparse) depth, guided by an image. Project website: https://MarigoldDepthCompletion.github.io/

Training and evaluation of state-of-the-art computer vision algorithms for reliable shallow depth of field (DoF) rendering and defocus deblurring remain constrained by a persistent lack of large-scale, full-frame, high fidelity, real-image datasets. Optical effects of shallow DoF and defocus blur depend intimately on camera optical configuration set with focal length and aperture; requiring rigorous evaluation of the models when these parameters systematically change. Further, modern applications such as AR, VR, smartphones, industrial robots, etc. deploy stereo or multi-camera systems. We present MODEST - the first ultra-high-resolution(5472x3648px, 20MP), multi-optics depth of field stereo DSLR dataset that methodically varies focal length and aperture for a series of complex, real-world scenes, capturing the optical realism and complexity of professional camera systems. With 20,000 images across 50 distinct optical configurations, focal length in 28-70mm, aperture in f/22-f/2.8 for multiple stereo viewpoints for 10 scenes; this ultra-high-resolution, full-range optics coverage enables controlled analysis of geometric and optical effects for shallow DoF rendering and defocus deblurring. Each scene is curated to have challenging visual elements: reflective surfaces, transparent glass walls, fine-grained details, point lights, and multi-scale depth illusions. In addition, we provide intrinsics and extrinsics calibration images to support ever-evolving calibration methods. We evaluate several SOTA DoF and defocus deblurring methods and demonstrate failure cases and limitations. Our comprehensive tuning analysis demonstrates how MODEST evaluates sensitivity of the SOTA DoF models for the actual focal configuration of input images. This work attempts to bridge the realism gap between synthetic, low-resolution training data and inference generalization on high-resolution real-camera optics.

Learning-to-learn or meta-learning leverages data-driven inductive bias to increase the efficiency of learning on a novel task. This approach encounters difficulty when transfer is not advantageous, for instance, when tasks are considerably dissimilar or change over time. We use the connection between gradient-based meta-learning and hierarchical Bayes to propose a Dirichlet process mixture of hierarchical Bayesian models over the parameters of an arbitrary parametric model such as a neural network. In contrast to consolidating inductive biases into a single set of hyperparameters, our approach of task-dependent hyperparameter selection better handles latent distribution shift, as demonstrated on a set of evolving, image-based, few-shot learning benchmarks.

Every recurrence of a looped language model adds cost in training, decoding, prefill, and reinforcement learning (RL). The closer recurrent states get to fixed points, the less the path to them matters. This enables truncated backpropagation in training; terminal key-value (KV) sharing for decoding with almost no loss in accuracy; a distilled student that prefills up to 1.79x faster; and RL updates that compute gradients from saved rollout states, 2x faster than backpropagating through the replayed trajectory. We therefore improve the two components of training that shape these fixed points: the depth prior and input injection. Fixed-depth training breaks KV sharing, and Huginn's broad depth prior supports sharing but dilutes supervision at the target depth more than sharing requires; we learn the prior from prediction feedback, with an entropy term that keeps it broad. Existing injection schemes let the state's component along the input amplify or cancel the injection; we remove this component with orthogonal injection. From 100M to 1.6B parameters, the learned prior and orthogonal injection lower perplexity at every scale relative to Huginn's prior and existing injection schemes, respectively. At 1.6B, the learned prior with a 3x smaller KV cache matches the downstream average of fixed-depth training with the full cache.

There is some theoretical evidence that deep neural networks with multiple hidden layers have a potential for more efficient representation of multidimensional mappings than shallow networks with a single hidden layer. The question is whether it is possible to exploit this theoretical advantage for finding such representations with help of numerical training methods. Tests using prototypical problems with a known mean square minimum did not confirm this hypothesis. Minima found with the help of deep networks have always been worse than those found using shallow networks. This does not directly contradict the theoretical findings---it is possible that the superior representational capacity of deep networks is genuine while finding the mean square minimum of such deep networks is a substantially harder problem than with shallow ones.

Weight decay is a broadly used technique for training state-of-the-art deep networks from image classification to large language models. Despite its widespread usage and being extensively studied in the classical literature, its role remains poorly understood for deep learning. In this work, we highlight that the role of weight decay in modern deep learning is different from its regularization effect studied in classical learning theory. For deep networks on vision tasks trained with multipass SGD, we show how weight decay modifies the optimization dynamics enhancing the ever-present implicit regularization of SGD via the loss stabilization mechanism. In contrast, for large language models trained with nearly one-epoch training, we describe how weight decay balances the bias-variance tradeoff in stochastic optimization leading to lower training loss and improved training stability. Overall, we present a unifying perspective from ResNets on vision tasks to LLMs: weight decay is never useful as an explicit regularizer but instead changes the training dynamics in a desirable way. The code is available at https://github.com/tml-epfl/why-weight-decay

Massive activations, residual-stream coordinates with magnitudes far larger than typical activations, are associated with attention sinks in transformers, but how their scale is regulated during training remains incompletely understood. Combining training-trajectory analyses and controlled interventions, we trace their emergence, growth, and consolidation. Sink-carrying channels vary across random seeds but stabilize early within each run. Over longer training, surrounding channels erode and the sink concentrates onto a few redundant carriers. Across ablations, gradient attenuation follows the sink token's collective root-mean-square magnitude rather than any single channel, making collective scale central to understanding their effects. Our central result is that weight decay causally controls the turnover of global activation scale. In controlled continuations, removing decay near the peak allows this scale to keep rising, whereas retaining it produces decline even at constant learning rate. We develop a balance model for the rise and peak of massive-activation magnitude, in which AdamW-preconditioned growth opposes weight decay. Sweeping the decay coefficient λ shifts peak timing approximately log-linearly and yields peak magnitudes scaling approximately as λ^{-1/2}, consistent with this balance. Optimizer measurements further show that preconditioning sustains the large-channel cohort against decay even when raw maintaining forces are too small to do so. Together, these findings connect the observed life cycle to scale-regulating training dynamics and establish weight decay as a training-time lever on activation magnitude.

Existing Multi-token prediction (MTP) methods are auxiliary by design: the multi-horizon loss mostly trains modules attached to the backbone, and each added horizon costs another module and another pass. We propose Efficient Causal Self-Recursion (ECHO), which removes both costs. The backbone's own final layer predicts every horizon, so the supervision lands on the parameters that generate the next token, and Dynamic Depth Sampling (DDS) keeps deeper horizons affordable by drawing the training depth with probabilities that decay along depth. Future prediction thus becomes part of the autoregressive objective rather than a task attached to it, and the gains follow on both sides of it. In pretraining, added depth converts into downstream accuracy where auxiliary modules saturate, concentrating on reasoning and code at half the MTP training overhead of training every depth. At inference, the pretrained model is its own drafter: it drafts beyond the depth it was trained for, and keeps its draft-target alignment on the open-ended, high-entropy generation where post-hoc drafters lose theirs. The advantage survives a doubled token budget, a repeated pretraining run, and supervised finetuning.

We demonstrate the possibility of what we call sparse learning: accelerated training of deep neural networks that maintain sparse weights throughout training while achieving dense performance levels. We accomplish this by developing sparse momentum, an algorithm which uses exponentially smoothed gradients (momentum) to identify layers and weights which reduce the error efficiently. Sparse momentum redistributes pruned weights across layers according to the mean momentum magnitude of each layer. Within a layer, sparse momentum grows weights according to the momentum magnitude of zero-valued weights. We demonstrate state-of-the-art sparse performance on MNIST, CIFAR-10, and ImageNet, decreasing the mean error by a relative 8%, 15%, and 6% compared to other sparse algorithms. Furthermore, we show that sparse momentum reliably reproduces dense performance levels while providing up to 5.61x faster training. In our analysis, ablations show that the benefits of momentum redistribution and growth increase with the depth and size of the network. Additionally, we find that sparse momentum is insensitive to the choice of its hyperparameters suggesting that sparse momentum is robust and easy to use.

We present NeX, a new approach to novel view synthesis based on enhancements of multiplane image (MPI) that can reproduce next-level view-dependent effects -- in real time. Unlike traditional MPI that uses a set of simple RGBalpha planes, our technique models view-dependent effects by instead parameterizing each pixel as a linear combination of basis functions learned from a neural network. Moreover, we propose a hybrid implicit-explicit modeling strategy that improves upon fine detail and produces state-of-the-art results. Our method is evaluated on benchmark forward-facing datasets as well as our newly-introduced dataset designed to test the limit of view-dependent modeling with significantly more challenging effects such as rainbow reflections on a CD. Our method achieves the best overall scores across all major metrics on these datasets with more than 1000times faster rendering time than the state of the art. For real-time demos, visit https://nex-mpi.github.io/

In this study, we address the challenge of 3D scene structure recovery from monocular depth estimation. While traditional depth estimation methods leverage labeled datasets to directly predict absolute depth, recent advancements advocate for mix-dataset training, enhancing generalization across diverse scenes. However, such mixed dataset training yields depth predictions only up to an unknown scale and shift, hindering accurate 3D reconstructions. Existing solutions necessitate extra 3D datasets or geometry-complete depth annotations, constraints that limit their versatility. In this paper, we propose a learning framework that trains models to predict geometry-preserving depth without requiring extra data or annotations. To produce realistic 3D structures, we render novel views of the reconstructed scenes and design loss functions to promote depth estimation consistency across different views. Comprehensive experiments underscore our framework's superior generalization capabilities, surpassing existing state-of-the-art methods on several benchmark datasets without leveraging extra training information. Moreover, our innovative loss functions empower the model to autonomously recover domain-specific scale-and-shift coefficients using solely unlabeled images.

This work presents Depth Anything, a highly practical solution for robust monocular depth estimation. Without pursuing novel technical modules, we aim to build a simple yet powerful foundation model dealing with any images under any circumstances. To this end, we scale up the dataset by designing a data engine to collect and automatically annotate large-scale unlabeled data (~62M), which significantly enlarges the data coverage and thus is able to reduce the generalization error. We investigate two simple yet effective strategies that make data scaling-up promising. First, a more challenging optimization target is created by leveraging data augmentation tools. It compels the model to actively seek extra visual knowledge and acquire robust representations. Second, an auxiliary supervision is developed to enforce the model to inherit rich semantic priors from pre-trained encoders. We evaluate its zero-shot capabilities extensively, including six public datasets and randomly captured photos. It demonstrates impressive generalization ability. Further, through fine-tuning it with metric depth information from NYUv2 and KITTI, new SOTAs are set. Our better depth model also results in a better depth-conditioned ControlNet. Our models are released at https://github.com/LiheYoung/Depth-Anything.

Benchmark contamination is diagnosed with n-gram overlap, likelihood-based membership inference, or canary strings, and each needs something usually unavailable: the training corpus, a well-chosen test statistic, or foresight at release. A recent alternative reads it off a linear probe on internal activations. We show the natural way to do this does not work, specify one that survives measurement, then find that the correction making it work carries more variance than the null it is tested against. The protocol reports a zero-sum contrast on the depth profile of probe accuracy, recentred on a level-matched placebo baseline, tested against a label-permutation null, with the reference set twice the size of the suspect set. Each choice replaces a simpler alternative we rejected on measurement. Reporting the level of excess separability rather than its shape makes the false positive rate track the size of the analyst's own control set, 0.03 to 0.99 under a true null. Contrasting against a flat depth profile rejects a true null 0.72 of the time when surface decodability rises with depth, and loses all power when it falls. On real transformers the protocol fails a test the simulations did not pose. The recentring subtracts an estimate, and the permutation null holds it fixed. Re-estimated across split seeds on four audits of contaminated checkpoints, its standard deviation is 1.30 to 1.56 times the null's own in every arm: what is subtracted to remove a bias is more variable than what it corrects. The one nominally significant result, p = 0.0075, becomes 0.0745 once that variance is propagated, and no verdict is issued. The simulations missed this because their surface key is the covariate driving item variation; on real text it is a proxy, and degrading key quality in simulation reproduces it. We add a companion measurement and a widened null. No arm shows contamination.

Current Reinforcement Fine-tuning (RFT) paradigms for Large Language Models (LLMs) suffer from sample inefficiency due to the redundant exposure of identical queries under uniform data sampling. While previous work has explored curriculum learning via heuristic difficulty metrics, these strategies exhibit limitations by neglecting the intrinsic learning signals generated by the model itself, thus leading to suboptimal training regimes. In this paper, we identify a model-inherent signal termed angle concentration that effectively reflects an LLM's capacity to learn from specific data. We theoretically and empirically demonstrate a correlation between the angular distribution of token hidden state vectors and the resulting gradient, revealing a learning preference for data exhibiting higher angle concentration. Inspired by this finding, we propose GAIN-RL, a Gradient-driven Angle-Informed Navigated RL framework. By leveraging the model's intrinsic angle concentration signal, GAIN-RL dynamically selects training data in each epoch, ensuring consistently impactful gradient updates and thus significantly enhancing overall training efficiency. Empirical evaluations show that GAIN-RL (GRPO) achieves over a 2.5x acceleration in training efficiency across diverse mathematical and coding tasks and varying model scales. Furthermore, GAIN-RL (GRPO)'s efficient sampling yields data-efficient training, achieving better performance with half the original data compared to vanilla GRPO with full training data. Code is realsed at https://github.com/wangqinsi1/GAINRL/tree/main.

Monocular depth estimation within the diffusion-denoising paradigm demonstrates impressive generalization ability but suffers from low inference speed. Recent methods adopt a single-step deterministic paradigm to improve inference efficiency while maintaining comparable performance. However, they overlook the gap between generative and discriminative features, leading to suboptimal results. In this work, we propose DepthMaster, a single-step diffusion model designed to adapt generative features for the discriminative depth estimation task. First, to mitigate overfitting to texture details introduced by generative features, we propose a Feature Alignment module, which incorporates high-quality semantic features to enhance the denoising network's representation capability. Second, to address the lack of fine-grained details in the single-step deterministic framework, we propose a Fourier Enhancement module to adaptively balance low-frequency structure and high-frequency details. We adopt a two-stage training strategy to fully leverage the potential of the two modules. In the first stage, we focus on learning the global scene structure with the Feature Alignment module, while in the second stage, we exploit the Fourier Enhancement module to improve the visual quality. Through these efforts, our model achieves state-of-the-art performance in terms of generalization and detail preservation, outperforming other diffusion-based methods across various datasets. Our project page can be found at https://indu1ge.github.io/DepthMaster_page.

Monocular 3D detectors achieve remarkable performance on cars and smaller objects. However, their performance drops on larger objects, leading to fatal accidents. Some attribute the failures to training data scarcity or their receptive field requirements of large objects. In this paper, we highlight this understudied problem of generalization to large objects. We find that modern frontal detectors struggle to generalize to large objects even on nearly balanced datasets. We argue that the cause of failure is the sensitivity of depth regression losses to noise of larger objects. To bridge this gap, we comprehensively investigate regression and dice losses, examining their robustness under varying error levels and object sizes. We mathematically prove that the dice loss leads to superior noise-robustness and model convergence for large objects compared to regression losses for a simplified case. Leveraging our theoretical insights, we propose SeaBird (Segmentation in Bird's View) as the first step towards generalizing to large objects. SeaBird effectively integrates BEV segmentation on foreground objects for 3D detection, with the segmentation head trained with the dice loss. SeaBird achieves SoTA results on the KITTI-360 leaderboard and improves existing detectors on the nuScenes leaderboard, particularly for large objects. Code and models at https://github.com/abhi1kumar/SeaBird

We seek to improve deep neural networks by generalizing the pooling operations that play a central role in current architectures. We pursue a careful exploration of approaches to allow pooling to learn and to adapt to complex and variable patterns. The two primary directions lie in (1) learning a pooling function via (two strategies of) combining of max and average pooling, and (2) learning a pooling function in the form of a tree-structured fusion of pooling filters that are themselves learned. In our experiments every generalized pooling operation we explore improves performance when used in place of average or max pooling. We experimentally demonstrate that the proposed pooling operations provide a boost in invariance properties relative to conventional pooling and set the state of the art on several widely adopted benchmark datasets; they are also easy to implement, and can be applied within various deep neural network architectures. These benefits come with only a light increase in computational overhead during training and a very modest increase in the number of model parameters.

Deep neural networks often generalize well despite heavy over-parameterization, challenging classical parameter-based analyses. We study generalization from a representation-centric perspective and analyze how the geometry of learned embeddings controls predictive performance for a fixed trained model. We show that population risk can be bounded by two factors: (i) the intrinsic dimension of the embedding distribution, which determines the convergence rate of empirical embedding distribution to the population distribution in Wasserstein distance, and (ii) the sensitivity of the downstream mapping from embeddings to predictions, characterized by Lipschitz constants. Together, these yield an embedding-dependent error bound that does not rely on parameter counts or hypothesis class complexity. At the final embedding layer, architectural sensitivity vanishes and the bound is dominated by embedding dimension, explaining its strong empirical correlation with generalization performance. Experiments across architectures and datasets validate the theory and demonstrate the utility of embedding-based diagnostics.

Preference based Reinforcement Learning (PbRL) removes the need to hand specify a reward function by learning a reward from preference feedback over policy behaviors. Current approaches to PbRL do not address the credit assignment problem inherent in determining which parts of a behavior most contributed to a preference, which result in data intensive approaches and subpar reward functions. We address such limitations by introducing a credit assignment strategy (Hindsight PRIOR) that uses a world model to approximate state importance within a trajectory and then guides rewards to be proportional to state importance through an auxiliary predicted return redistribution objective. Incorporating state importance into reward learning improves the speed of policy learning, overall policy performance, and reward recovery on both locomotion and manipulation tasks. For example, Hindsight PRIOR recovers on average significantly (p<0.05) more reward on MetaWorld (20%) and DMC (15%). The performance gains and our ablations demonstrate the benefits even a simple credit assignment strategy can have on reward learning and that state importance in forward dynamics prediction is a strong proxy for a state's contribution to a preference decision. Code repository can be found at https://github.com/apple/ml-rlhf-hindsight-prior.

In this paper, we study the infinite-depth limit of finite-width residual neural networks with random Gaussian weights. With proper scaling, we show that by fixing the width and taking the depth to infinity, the pre-activations converge in distribution to a zero-drift diffusion process. Unlike the infinite-width limit where the pre-activation converge weakly to a Gaussian random variable, we show that the infinite-depth limit yields different distributions depending on the choice of the activation function. We document two cases where these distributions have closed-form (different) expressions. We further show an intriguing change of regime phenomenon of the post-activation norms when the width increases from 3 to 4. Lastly, we study the sequential limit infinite-depth-then-infinite-width and compare it with the more commonly studied infinite-width-then-infinite-depth limit.

Monocular depth estimation is known as an ill-posed task in which objects in a 2D image usually do not contain sufficient information to predict their depth. Thus, it acts differently from other tasks (e.g., classification and segmentation) in many ways. In this paper, we find that self-supervised monocular depth estimation shows a direction sensitivity and environmental dependency in the feature representation. But the current backbones borrowed from other tasks pay less attention to handling different types of environmental information, limiting the overall depth accuracy. To bridge this gap, we propose a new Direction-aware Cumulative Convolution Network (DaCCN), which improves the depth feature representation in two aspects. First, we propose a direction-aware module, which can learn to adjust the feature extraction in each direction, facilitating the encoding of different types of information. Secondly, we design a new cumulative convolution to improve the efficiency for aggregating important environmental information. Experiments show that our method achieves significant improvements on three widely used benchmarks, KITTI, Cityscapes, and Make3D, setting a new state-of-the-art performance on the popular benchmarks with all three types of self-supervision.

Long-context reasoning is a critical capability of large language models (LLMs), enabling applications such as long-document understanding, summarization, and code generation. However, efficient autoregressive inference relies on the key-value (KV) cache, whose memory footprint grows linearly with sequence length, leading to a major memory bottleneck. To mitigate this overhead, KV cache pruning methods discard cached tokens with low attention scores during inference. Most existing methods apply a uniform pruning ratio across layers, implicitly assuming that all layers contribute equally to overall model performance. We show that this assumption is suboptimal, as layers differ significantly in their sensitivity to pruning. We propose DepthKV, a layer-dependent pruning framework that allocates a fixed global KV budget across layers based on their sensitivity, rather than using a uniform allocation. Across multiple models and tasks, DepthKV consistently outperforms uniform pruning at the same global pruning ratio, demonstrating more effective utilization of the KV cache budget through layer-dependent allocation.

Recently, channel-independent methods have achieved state-of-the-art performance in multivariate time series (MTS) forecasting. Despite reducing overfitting risks, these methods miss potential opportunities in utilizing channel dependence for accurate predictions. We argue that there exist locally stationary lead-lag relationships between variates, i.e., some lagged variates may follow the leading indicators within a short time period. Exploiting such channel dependence is beneficial since leading indicators offer advance information that can be used to reduce the forecasting difficulty of the lagged variates. In this paper, we propose a new method named LIFT that first efficiently estimates leading indicators and their leading steps at each time step and then judiciously allows the lagged variates to utilize the advance information from leading indicators. LIFT plays as a plugin that can be seamlessly collaborated with arbitrary time series forecasting methods. Extensive experiments on six real-world datasets demonstrate that LIFT improves the state-of-the-art methods by 5.5% in average forecasting performance. Our code is available at https://github.com/SJTU-Quant/LIFT.

Numerous deep learning applications benefit from multi-task learning with multiple regression and classification objectives. In this paper we make the observation that the performance of such systems is strongly dependent on the relative weighting between each task's loss. Tuning these weights by hand is a difficult and expensive process, making multi-task learning prohibitive in practice. We propose a principled approach to multi-task deep learning which weighs multiple loss functions by considering the homoscedastic uncertainty of each task. This allows us to simultaneously learn various quantities with different units or scales in both classification and regression settings. We demonstrate our model learning per-pixel depth regression, semantic and instance segmentation from a monocular input image. Perhaps surprisingly, we show our model can learn multi-task weightings and outperform separate models trained individually on each task.

The cost of hyperparameter tuning in deep learning has been rising with model sizes, prompting practitioners to find new tuning methods using a proxy of smaller networks. One such proposal uses muP parameterized networks, where the optimal hyperparameters for small width networks transfer to networks with arbitrarily large width. However, in this scheme, hyperparameters do not transfer across depths. As a remedy, we study residual networks with a residual branch scale of 1/text{depth} in combination with the muP parameterization. We provide experiments demonstrating that residual architectures including convolutional ResNets and Vision Transformers trained with this parameterization exhibit transfer of optimal hyperparameters across width and depth on CIFAR-10 and ImageNet. Furthermore, our empirical findings are supported and motivated by theory. Using recent developments in the dynamical mean field theory (DMFT) description of neural network learning dynamics, we show that this parameterization of ResNets admits a well-defined feature learning joint infinite-width and infinite-depth limit and show convergence of finite-size network dynamics towards this limit.

Note: This paper describes an older version of DeepLIFT. See https://arxiv.org/abs/1704.02685 for the newer version. Original abstract follows: The purported "black box" nature of neural networks is a barrier to adoption in applications where interpretability is essential. Here we present DeepLIFT (Learning Important FeaTures), an efficient and effective method for computing importance scores in a neural network. DeepLIFT compares the activation of each neuron to its 'reference activation' and assigns contribution scores according to the difference. We apply DeepLIFT to models trained on natural images and genomic data, and show significant advantages over gradient-based methods.

Deep residual architectures, such as ResNet and the Transformer, have enabled models of unprecedented depth, yet a formal understanding of why depth is so effective remains an open question. A popular intuition, following Veit et al. (2016), is that these residual networks behave like ensembles of many shallower models. Our key finding is an explicit analytical formula that verifies this ensemble perspective, proving that increasing network depth is mathematically equivalent to expanding the size of this implicit ensemble. Furthermore, our expansion reveals a hierarchical ensemble structure in which the combinatorial growth of computation paths leads to an explosion in the output signal, explaining the historical necessity of normalization layers in training deep models. This insight offers a first principles explanation for the historical dependence on normalization layers and sheds new light on a family of successful normalization-free techniques like SkipInit and Fixup. However, while these previous approaches infer scaling factors through optimizer analysis or a heuristic analogy to Batch Normalization, our work offers the first explanation derived directly from the network's inherent functional structure. Specifically, our Residual Expansion Theorem reveals that scaling each residual module provides a principled solution to taming the combinatorial explosion inherent to these architectures. We further show that this scaling acts as a capacity controls that also implicitly regularizes the model's complexity.

Depth sensors are widely deployed across robotic platforms, and advances in fast, high-fidelity depth simulation have enabled robotic policies trained on depth observations to achieve robust sim-to-real transfer for a wide range of tasks. Despite this, representation learning for depth modality remains underexplored compared to RGB, where large-scale foundation models now define the state of the art. To address this gap, we present DeFM, a self-supervised foundation model trained entirely on depth images for robotic applications. Using a DINO-style self-distillation objective on a curated dataset of 60M depth images, DeFM learns geometric and semantic representations that generalize to diverse environments, tasks, and sensors. To retain metric awareness across multiple scales, we introduce a novel input normalization strategy. We further distill DeFM into compact models suitable for resource-constrained robotic systems. When evaluated on depth-based classification, segmentation, navigation, locomotion, and manipulation benchmarks, DeFM achieves state-of-the-art performance and demonstrates strong generalization from simulation to real-world environments. We release all our pretrained models, which can be adopted off-the-shelf for depth-based robotic learning without task-specific fine-tuning. Webpage: https://de-fm.github.io/

Visual reasoning through reinforcement learning with verifiable rewards (RLVR) has achieved remarkable progress. However, when dealing with multi-source inputs, existing approaches tend to treat them as a mere accumulation of information, lacking explicit mechanisms to distinguish whether integrating additional sources yields information gain or introduces interference. Therefore, they struggle to effectively model dynamic interaction when integrating multiple sources, particularly when they differ significantly in physical properties and semantics, e.g., infrared and depth, leading to inferior performance to mono-source reasoning when a certain source holds the dominant signal. To address this issue, we propose MARS, a novel mono-anchored multi-source reasoning framework that models each visual modality as an independent information source. Specifically, by treating mono-source rewards as dynamic anchors, our method explicitly incorporates the information gain introduced by multi-source fusion into advantage normalization and adaptively emphasizes mutual promotion between sources while suppressing potential noise or conflicts during RLVR. From theoretical analysis, our method effectively quantifies information gain introduced by multi-source integration in gradient estimation, enabling consistent modality regulation. Empirical results also show impressive 3.2% and 4.9% performance gains on GRPO and DAPO across diverse datasets, confirming effectiveness of our method.

Transformers propagate information across depth through a single additive residual stream: every sublayer reads only the most recent state. Attention residuals relax this by letting each sublayer attend, through a learned softmax. However, that read uses a single query shared across the entire width, so every feature subspace must read the depth history through one distribution. The cost of this forced compromise grows with how much the subspaces disagree about which layers to read, and disagreement grows with model width. We introduce Multi-Head Attention Residuals (MHAR): the routing query is reshaped into H per-subspace heads, each with its own softmax over the depth history. The read becomes block-diagonal, the reshape adds zero parameters and negligible compute, and H = 1 recovers attention residuals exactly. Trained from scratch on a deduplicated Nemotron-based anneal corpus that is quality-filtered and STEM- and code-heavy, MHAR improves validation loss over a standard Transformer at 100M, 350M, and 1B (-0.061, -0.149, and -0.140). It achieves the best result among four methods in every setting, with the gain increasing from 100M to the larger scales. The head count is a real design axis rather than a free knob: validation loss is U-shaped with respect to H, with a flat optimum at H = 4 or H = 8 across scales. We adopt H = 8 for large-scale models; over-splitting beyond this point (H = 16) consistently gives back part of the gain. A direct probe of the trained queries confirms that learned subspace disagreement is the underlying driver. Fused Triton routing kernels increase attention-residual training throughput from 0.2-0.5x to 0.55-0.88x of the baseline while maintaining near-baseline peak memory. An identity-preserving conversion using delta attention residuals supports 8B mid-training, yielding improvements of +3.2 on GSM8K and +3.1 on GPQA.

Understanding how convolutional neural networks (CNNs) can efficiently learn high-dimensional functions remains a fundamental challenge. A popular belief is that these models harness the local and hierarchical structure of natural data such as images. Yet, we lack a quantitative understanding of how such structure affects performance, e.g., the rate of decay of the generalisation error with the number of training samples. In this paper, we study infinitely-wide deep CNNs in the kernel regime. First, we show that the spectrum of the corresponding kernel inherits the hierarchical structure of the network, and we characterise its asymptotics. Then, we use this result together with generalisation bounds to prove that deep CNNs adapt to the spatial scale of the target function. In particular, we find that if the target function depends on low-dimensional subsets of adjacent input variables, then the decay of the error is controlled by the effective dimensionality of these subsets. Conversely, if the target function depends on the full set of input variables, then the error decay is controlled by the input dimension. We conclude by computing the generalisation error of a deep CNN trained on the output of another deep CNN with randomly-initialised parameters. Interestingly, we find that, despite their hierarchical structure, the functions generated by infinitely-wide deep CNNs are too rich to be efficiently learnable in high dimension.

Compositional generalization-the ability to interpret novel combinations of familiar components-remains a persistent challenge for neural networks. Behavioral evaluations reveal when models fail but offer limited insight into why failures arise at the representational level. We introduce Homomorphism Error (HE), a structural metric that quantifies deviations from approximate homomorphisms between the expression algebra and a model's hidden-state space. We instantiate HE for two compositional operators in SCAN-style tasks: modifier HE for unary composition and sequence HE for binary composition, measured by learning representation-level operators that predict composed representations from their parts. Across controlled experiments with small decoder-only Transformers, HE predicts out-of-distribution (OOD) compositional generalization under noise injection, achieving R^2 = 0.73 correlation between modifier HE and OOD accuracy. Ablations show that model depth has minimal effect on either HE or OOD accuracy, training data coverage exhibits threshold effects (insufficient coverage sharply increases HE and degrades OOD performance), and randomly inserted noise tokens systematically increase HE. Finally, we test if HE-regularized training improves OOD accuracy. Experiment shows that explicitly enforcing low modifier HE during training significantly reduces modifier HE (p = 1.1x10-4) and sequence HE (p = 0.001) and yields a statistically significant improvement in OOD accuracy (p = 0.023). Together, these results indicate the potential of HE to be both a diagnostic and an actionable training signal for improving compositional generalization. Code to reproduce our experiments is open-sourced.

Zero-shot depth completion has gained attention for its ability to generalize across environments without sensor-specific datasets or retraining. However, most existing approaches rely on diffusion-based test-time optimization, which is computationally expensive due to iterative denoising. Recent visual-prompt-based methods reduce training cost but still require repeated forward--backward passes through the full frozen network to optimize input-level prompts, resulting in slow inference. In this work, we show that adapting only the decoder is sufficient for effective test-time optimization, as depth foundation models concentrate depth-relevant information within a low-dimensional decoder subspace. Based on this insight, we propose a lightweight test-time adaptation method that updates only this low-dimensional subspace using sparse depth supervision. Our approach achieves state-of-the-art performance, establishing a new Pareto frontier between accuracy and efficiency for test-time adaptation. Extensive experiments on five indoor and outdoor datasets demonstrate consistent improvements over prior methods, highlighting the practicality of fast zero-shot depth completion.