Daily Papers

Target-speaker automatic speech recognition (TS-ASR) aims to recognize a designated speaker while suppressing interfering speech in multi-talker environments. Conventional TS-ASR typically relies on an enrollment utterance, whereas text-guided methods use known lexical content, such as a wake word, to identify the target speaker from the observed mixture. These two cues provide complementary information but are usually studied separately. We propose a Unified Dual-Cue TS-ASR framework that supports text cues, enrollment speech, or both within a single model. Text cues interact with the mixture representation to extract target-speaker information conditioned on known lexical content, while an independent enrollment utterance provides complementary speaker information. Cross-attention cue-conditioning modules are integrated into shared Conformer blocks, and negative-cue sampling provides cue-validity supervision during dual-cue training. Experiments on 30,000 two-speaker mixtures across five recording/domain conditions and four oracle text-cue lengths show that, with five-character text cues, the concatenated dual-cue method achieves 8.80% CER, compared with 17.32% for text-only and 29.06% for enrollment-only inference. It also outperforms parallel dual-cue fusion (9.49% CER) and yields lower dual-cue CER across all five evaluation subsets. These results demonstrate the benefit of jointly exploiting complementary lexical and speaker information for target-speaker ASR.

3D Human motion generation is pivotal across film, animation, gaming, and embodied intelligence. Traditional 3D motion synthesis relies on costly motion capture, while recent work shows that 2D videos provide rich, temporally coherent observations of human behavior. Existing approaches, however, either map high-level text descriptions to motion or rely solely on video conditioning, leaving a gap between generated dynamics and real-world motion statistics. We introduce MotionDuet, a multimodal framework that aligns motion generation with the distribution of video-derived representations. In this dual-conditioning paradigm, video cues extracted from a pretrained model (e.g., VideoMAE) ground low-level motion dynamics, while textual prompts provide semantic intent. To bridge the distribution gap across modalities, we propose Dual-stream Unified Encoding and Transformation (DUET) and a Distribution-Aware Structural Harmonization (DASH) loss. DUET fuses video-informed cues into the motion latent space via unified encoding and dynamic attention, while DASH aligns motion trajectories with both distributional and structural statistics of video features. An auto-guidance mechanism further balances textual and visual signals by leveraging a weakened copy of the model, enhancing controllability without sacrificing diversity. Extensive experiments demonstrate that MotionDuet generates realistic and controllable human motions, surpassing strong state-of-the-art baselines.

We address the problem of Embodied Reference Understanding, which involves predicting the object that a person in the scene is referring to through both pointing gesture and language. Accurately identifying the referent requires multimodal understanding: integrating textual instructions, visual pointing, and scene context. However, existing methods often struggle to effectively leverage visual clues for disambiguation. We also observe that, while the referent is often aligned with the head-to-fingertip line, it occasionally aligns more closely with the wrist-to-fingertip line. Therefore, relying on a single line assumption can be overly simplistic and may lead to suboptimal performance. To address this, we propose a dual-model framework, where one model learns from the head-to-fingertip direction and the other from the wrist-to-fingertip direction. We further introduce a Gaussian ray heatmap representation of these lines and use them as input to provide a strong supervisory signal that encourages the model to better attend to pointing cues. To combine the strengths of both models, we present the CLIP-Aware Pointing Ensemble module, which performs a hybrid ensemble based on CLIP features. Additionally, we propose an object center prediction head as an auxiliary task to further enhance referent localization. We validate our approach through extensive experiments and analysis on the benchmark YouRefIt dataset, achieving an improvement of approximately 4 mAP at the 0.25 IoU threshold.

Text-driven 3D scene editing has recently attracted increasing attention. Most existing methods follow a render-edit-optimize pipeline, where multi-view images are rendered from a 3D scene, edited with 2D image editors, and then used to optimize the underlying 3D representation. However, cross-view inconsistency remains a major bottleneck. Although recent methods introduce geometric cues, cross-view interactions, or video priors to mitigate this issue, they still largely rely on inference-time synchronization and thus remain limited in robustness and generalization.In this work, we recast multi-view consistent 3D editing from a distributional perspective: 3D scene editing essentially requires a joint distribution modeling across viewpoints.Based on this insight, we propose a view-consistent 3D editing framework that explicitly introduces cross-view dependencies into the editing process. Furthermore, motivated by the observation that structural correspondence and semantic continuity rely on different cross-view cues, we introduce a dual-path consistency mechanism consisting of projection-guided structural guidance and patch-level semantic propagation for effective cross-view editing. Further, we construct a paired multi-view editing dataset that provides reliable supervision for learning cross-view consistency in edited scenes. Extensive experiments demonstrate that our method achieves superior editing performance with precise and consistent views for complex scenes.

Tracking dense, homogeneous targets like schooling fish remains a major challenge for multiple object tracking due to extreme inter-individual homogeneity, severe physical clustering, and rapid non-rigid deformations. While heavy-backbone separated detection and embedding trackers like SU-T push accuracy boundaries using complex Re-Identification networks, their computational overhead prohibits edge deployment. Furthermore, these modules often fail when appearance features degrade under severe occlusions. To overcome this, we propose Tracking Identities with Dual-branch Elasticity (TIDE). Bypassing expensive appearance cues, TIDE utilizes the Adaptive Geometric Correspondence IoU, an association mechanism leveraging spatial and structural consistency to robustly handle complex morphological variations. Crucially, TIDE introduces system-level deployment elasticity, decoupling the algorithmic pipeline from strict hardware constraints. Evaluations on the MFT-Edge benchmark demonstrate that our Lightweight L-branch achieves a competitive HOTA of 28.43 using merely 20.47G FLOPs. This represents a 38.7-fold computational reduction compared to upper bounds like SU-T, directly facilitating real-time edge deployment. Concurrently, our Scalable S-branch establishes a 29.98 HOTA, successfully bridging the gap between high-precision cloud analysis and efficient edge tracking. The dataset and codes are released at https://vranlee.github.io/TIDE/.

Long-horizon manipulation requires robots to remember cues that are no longer in view while responding to moving objects. Yet vision-language-action (VLA) policies often rely on the latest observation, and refreshing their visual context typically requires another costly vision-language model (VLM) pass. We present D^2-VLA, which combines dual memory and dual-frequency control at the KV-cache interface of a pretrained VLA. D^2-VLA uses block-wise causal KV caching to encode observations incrementally and, guided by distinct temporal attention patterns, constructs separate historical KV read views for the VLM and action expert. Between periodic VLM updates, a gated adapter incorporates fresh visual features into the latest history-conditioned KV block, while a short fast-memory queue supports action replanning. We introduce DOMINO-Long, a ten-task benchmark requiring robots to use earlier visual cues when manipulating moving objects. D^2-VLA achieves complete-task success rates of 29.3\% on DOMINO, compared with 9.6\% for π_{0.5} and 17.2\% for PUMA, and 60.0\% on DOMINO-Long, compared with 35.4\% and 20.6\%, respectively. It improves success rates on eight real-robot tasks and reaches 97.5\% on LIBERO-Long and 74.3\% on RoboTwin 2.0.

Research on agent memory has matured rapidly, but almost entirely on the text side: few existing benchmarks ask, in an interactive environment, when an agent genuinely needs to remember what it saw rather than what it could write down. We introduce DMV-Bench (Code: https://github.com/yyyujintang/DMV-Bench), the first interactive benchmark for multimodal-agent visual memory. DMV-Bench is built on a controlled home-furnishing e-commerce catalogue of 1,000 product variants in which a text-leakage contract keeps the discriminative signal of each task in the pixels alone. Across a chain of autonomous shopping sessions, every visited product image carries a unique, pre-rendered incidental cue, and the agent is later asked to recall a particular cued product and navigate to its URL. Inspired by dual-coding theory, we propose DualMem, a memory architecture that maintains a visual and a verbal code in parallel. On DMV-Bench, DualMem outperforms a caption baseline and three recent multimodal agent-memory systems at every chain length J in {5, 10, 15, 50} on both Gemini 2.5 Flash and Qwen2.5-VL-7B, with the lead surviving controls for memory-bank size and encoding-position bias, and an asymmetric dual-coding regime in which vision carries the cue end-to-end while the verbal channel plays a smaller query-grounding role.

Robotic ultrasound couples a high-rate contact-force loop with slower, delayed image feedback, so image-guided ultrasound probe rotation can perturb contact force before the resulting image response is observed. We derive a closed-form orientation-rate limit that bounds the modeled rotation-induced estimated-force excursion over a finite horizon while accounting for disturbance rejection by the fast force loop. The limit depends on local contact stiffness, force-loop gains, a conservative rotation-to-force gain bound, the excursion budget, and the prediction horizon. We implement this model in a dual-rate controller with timestamp-based delay reconstruction and joint-torque-based force estimation, and evaluate it on a curved gelatin phantom using paired controller comparisons and component ablations. Relative to unconstrained image guidance, the proposed rate-limited controller reduced first-second root-mean-square (RMS) estimated-force error by 0.40 N while increasing cue-convergence time by 0.94 s. A fixed rate cap near the analytically predicted ceiling produced no resolvable difference in force error and converged 0.32 s faster, indicating that the principal practical value of the model is the rate-design rule rather than online prediction. Delay reconstruction had no resolvable effect at the tested latency. A single-subject popliteal scan demonstrated feasibility, although the image cue was noise-limited on heterogeneous tissue.

Recent state-of-the-art image restoration methods mostly adopt latent diffusion models with U-Net backbones, yet still facing challenges in achieving high-quality restoration due to their limited capabilities. Diffusion transformers (DiTs), like SD3, are emerging as a promising alternative because of their better quality with scalability. In this paper, we introduce DPIR (Dual Prompting Image Restoration), a novel image restoration method that effectivly extracts conditional information of low-quality images from multiple perspectives. Specifically, DPIR consits of two branches: a low-quality image conditioning branch and a dual prompting control branch. The first branch utilizes a lightweight module to incorporate image priors into the DiT with high efficiency. More importantly, we believe that in image restoration, textual description alone cannot fully capture its rich visual characteristics. Therefore, a dual prompting module is designed to provide DiT with additional visual cues, capturing both global context and local appearance. The extracted global-local visual prompts as extra conditional control, alongside textual prompts to form dual prompts, greatly enhance the quality of the restoration. Extensive experimental results demonstrate that DPIR delivers superior image restoration performance.

Existing detectors are often trained on biased datasets, leading to the possibility of overfitting on non-causal image attributes that are spuriously correlated with real/synthetic labels. While these biased features enhance performance on the training data, they result in substantial performance degradation when applied to unbiased datasets. One common solution is to perform dataset alignment through generative reconstruction, matching the semantic content between real and synthetic images. However, we revisit this approach and show that pixel-level alignment alone is insufficient. The reconstructed images still suffer from frequency-level misalignment, which can perpetuate spurious correlations. To illustrate, we observe that reconstruction models tend to restore the high-frequency details lost in real images (possibly due to JPEG compression), inadvertently creating a frequency-level misalignment, where synthetic images appear to have richer high-frequency content than real ones. This misalignment leads to models associating high-frequency features with synthetic labels, further reinforcing biased cues. To resolve this, we propose Dual Data Alignment (DDA), which aligns both the pixel and frequency domains. Moreover, we introduce two new test sets: DDA-COCO, containing DDA-aligned synthetic images for testing detector performance on the most aligned dataset, and EvalGEN, featuring the latest generative models for assessing detectors under new generative architectures such as visual auto-regressive generators. Finally, our extensive evaluations demonstrate that a detector trained exclusively on DDA-aligned MSCOCO could improve across 8 diverse benchmarks by a non-trivial margin, showing a +7.2% on in-the-wild benchmarks, highlighting the improved generalizability of unbiased detectors. Our code is available at: https://github.com/roy-ch/Dual-Data-Alignment.

Spatial understanding of the physical world from 2D visual inputs hinges on two complementary forms of geometric knowledge: holistic 3D structural perception and fine-grained metric scale estimation. Existing multimodal large language models (MLLMs) typically address only one facet, ingesting either depth maps or point clouds as additional model inputs, which incurs substantial computational overhead and inherits the generalization limitations of upstream prediction models. We propose GAMSI, a dual-pathway Geometry-Aware MLLM for Spatial Intelligence that takes only RGB images as input while internalizing both forms of geometric prior within a unified autoregressive backbone. Specifically, we introduce Metric-Structure Decoupled Queries (MSDQ) which employ two groups of learnable queries to respectively extract dense metric signals and sparse structural cues from the shared visual context, with a task-decoupled attention mask further preventing the two pathways from contaminating each other. Building on this, an Expert-Guided Visual Grounding (EVG) module projects the aggregated cues back to frame-level visual features and aligns them with vision foundation models, which serve purely as training-time supervision, rather than as model inputs. We further build a multi-task spatial instruction-tuning dataset (MTS) comprising 152{,}776 samples spanning 13 task types and three visual modalities, consolidated from six public datasets. Trained with a two-stage curriculum, GAMSI achieves state-of-the-art performance on seven spatial intelligence benchmarks.

Recent AI-based scoliosis screening methods primarily rely on large-scale silhouette datasets, often neglecting clinically relevant postural asymmetries-key indicators in traditional screening. In contrast, pose data provide an intuitive skeletal representation, enhancing clinical interpretability across various medical applications. However, pose-based scoliosis screening remains underexplored due to two main challenges: (1) the scarcity of large-scale, annotated pose datasets; and (2) the discrete and noise-sensitive nature of raw pose coordinates, which hinders the modeling of subtle asymmetries. To address these limitations, we introduce Scoliosis1K-Pose, a 2D human pose annotation set that extends the original Scoliosis1K dataset, comprising 447,900 frames of 2D keypoints from 1,050 adolescents. Building on this dataset, we introduce the Dual Representation Framework (DRF), which integrates a continuous skeleton map to preserve spatial structure with a discrete Postural Asymmetry Vector (PAV) that encodes clinically relevant asymmetry descriptors. A novel PAV-Guided Attention (PGA) module further uses the PAV as clinical prior to direct feature extraction from the skeleton map, focusing on clinically meaningful asymmetries. Extensive experiments demonstrate that DRF achieves state-of-the-art performance. Visualizations further confirm that the model leverages clinical asymmetry cues to guide feature extraction and promote synergy between its dual representations. The dataset and code are publicly available at https://zhouzi180.github.io/Scoliosis1K/.

Diffusion-based video generation can create realistic videos, yet existing image- and text-based conditioning fails to offer precise motion control. Prior methods for motion-conditioned synthesis typically require model-specific fine-tuning, which is computationally expensive and restrictive. We introduce Time-to-Move (TTM), a training-free, plug-and-play framework for motion- and appearance-controlled video generation with image-to-video (I2V) diffusion models. Our key insight is to use crude reference animations obtained through user-friendly manipulations such as cut-and-drag or depth-based reprojection. Motivated by SDEdit's use of coarse layout cues for image editing, we treat the crude animations as coarse motion cues and adapt the mechanism to the video domain. We preserve appearance with image conditioning and introduce dual-clock denoising, a region-dependent strategy that enforces strong alignment in motion-specified regions while allowing flexibility elsewhere, balancing fidelity to user intent with natural dynamics. This lightweight modification of the sampling process incurs no additional training or runtime cost and is compatible with any backbone. Extensive experiments on object and camera motion benchmarks show that TTM matches or exceeds existing training-based baselines in realism and motion control. Beyond this, TTM introduces a unique capability: precise appearance control through pixel-level conditioning, exceeding the limits of text-only prompting. Visit our project page for video examples and code: https://time-to-move.github.io/.

Vision-Language-Action (VLA) models have shown great promise for embodied AI, yet the heavy computational cost of processing continuous visual streams severely limits their real-time deployment. Token pruning (keeping salient visual tokens and dropping redundant ones) has emerged as an effective approach for accelerating Vision-Language Models (VLMs), offering a solution for efficient VLA. However, these VLM-specific token pruning methods select tokens based solely on semantic salience metrics (e.g., prefill attention), while overlooking the VLA's intrinsic dual-system nature of high-level semantic understanding and low-level action execution. Consequently, these methods bias token retention toward semantic cues, discard critical information for action generation, and significantly degrade VLA performance. To bridge this gap, we propose VLA-Pruner, a versatile plug-and-play VLA-specific token prune method that aligns with the dual-system nature of VLA models and exploits the temporal continuity in robot manipulation. Specifically, VLA-Pruner adopts a dual-level importance criterion for visual token retention: vision-language prefill attention for semantic-level relevance and action decode attention, estimated via temporal smoothing, for action-level importance. Based on this criterion, VLA-Pruner proposes a novel dual-level token selection strategy that adaptively preserves a compact, informative set of visual tokens for both semantic understanding and action execution under given compute budget. Experiments show that VLA-Pruner achieves state-of-the-art performance across multiple VLA architectures and diverse robotic tasks.

Instruction-following information retrieval (IF-IR) studies retrieval systems that must not only find documents relevant to a query, but also obey explicit user constraints such as required attributes, exclusions, or output preferences. However, most retrievers are trained primarily for semantic relevance and often fail to distinguish documents that match the topic from those that satisfy the instruction. We propose a dual-view data synthesis strategy based on polarity reversal: given a query, a document that is relevant under the instruction, and a hard negative that matches the query but violates the instruction, we prompt an LLM to generate a complementary instruction under which the two documents swap relevance labels. By presenting the same document pair under complementary instructions that invert their relevance labels, the training signal forces the retriever to reconsider the same candidate set through the instruction, rather than relying on fixed topical cues. On a 305M-parameter encoder, our method improves performance on the FollowIR benchmark by 45%, surpassing general-purpose embedding models of comparable or larger scale. Through head-to-head comparisons at matched data budgets, we further show that data diversity and instruction supervision play complementary roles: the former preserves general retrieval quality, while the latter improves instruction sensitivity. These results highlight the value of targeted data synthesis for building retrieval systems that are both broadly capable and instruction-aware.

Weakly supervised 3D instance segmentation is essential for 3D scene understanding, especially as the growing scale of data and high annotation costs associated with fully supervised approaches. Existing methods primarily rely on two forms of weak supervision: one-thing-one-click annotations and bounding box annotations, both of which aim to reduce labeling efforts. However, these approaches still encounter limitations, including labor-intensive annotation processes, high complexity, and reliance on expert annotators. To address these challenges, we propose DBGroup, a two-stage weakly supervised 3D instance segmentation framework that leverages scene-level annotations as a more efficient and scalable alternative. In the first stage, we introduce a Dual-Branch Point Grouping module to generate pseudo labels guided by semantic and mask cues extracted from multi-view images. To further improve label quality, we develop two refinement strategies: Granularity-Aware Instance Merging and Semantic Selection and Propagation. The second stage involves multi-round self-training on an end-to-end instance segmentation network using the refined pseudo-labels. Additionally, we introduce an Instance Mask Filter strategy to address inconsistencies within the pseudo labels. Extensive experiments demonstrate that DBGroup achieves competitive performance compared to sparse-point-level supervised 3D instance segmentation methods, while surpassing state-of-the-art scene-level supervised 3D semantic segmentation approaches. Code is available at https://github.com/liuxuexun/DBGroup.

Accurate monocular 3D object detection (M3OD) is pivotal for safety-critical applications like autonomous driving, yet its reliability deteriorates significantly under real-world domain shifts caused by environmental or sensor variations. To address these shifts, Test-Time Adaptation (TTA) methods have emerged, enabling models to adapt to target distributions during inference. While prior TTA approaches recognize the positive correlation between low uncertainty and high generalization ability, they fail to address the dual uncertainty inherent to M3OD: semantic uncertainty (ambiguous class predictions) and geometric uncertainty (unstable spatial localization). To bridge this gap, we propose Dual Uncertainty Optimization (DUO), the first TTA framework designed to jointly minimize both uncertainties for robust M3OD. Through a convex optimization lens, we introduce an innovative convex structure of the focal loss and further derive a novel unsupervised version, enabling label-agnostic uncertainty weighting and balanced learning for high-uncertainty objects. In parallel, we design a semantic-aware normal field constraint that preserves geometric coherence in regions with clear semantic cues, reducing uncertainty from the unstable 3D representation. This dual-branch mechanism forms a complementary loop: enhanced spatial perception improves semantic classification, and robust semantic predictions further refine spatial understanding. Extensive experiments demonstrate the superiority of DUO over existing methods across various datasets and domain shift types.

Chain-of-thought (CoT) prompting improves LLM reasoning but incurs high latency and memory cost due to verbose traces, motivating CoT compression with preserved correctness. Existing methods either shorten CoTs at the semantic level, which is often conservative, or prune tokens aggressively, which can miss task-critical cues and degrade accuracy. Moreover, combining the two is non-trivial due to sequential dependency, task-agnostic pruning, and distribution mismatch. We propose CtrlCoT, a dual-granularity CoT compression framework that harmonizes semantic abstraction and token-level pruning through three components: Hierarchical Reasoning Abstraction produces CoTs at multiple semantic granularities; Logic-Preserving Distillation trains a logic-aware pruner to retain indispensable reasoning cues (e.g., numbers and operators) across pruning ratios; and Distribution-Alignment Generation aligns compressed traces with fluent inference-time reasoning styles to avoid fragmentation. On MATH-500 with Qwen2.5-7B-Instruct, CtrlCoT uses 30.7\% fewer tokens while achieving 7.6 percentage points higher than the strongest baseline, demonstrating more efficient and reliable reasoning. Our code will be publicly available at https://github.com/fanzhenxuan/Ctrl-CoT.

The rapid growth of large language models raises pressing concerns about intellectual property protection under black-box deployment. Existing backdoor-based fingerprints either rely on rare tokens -- leading to high-perplexity inputs susceptible to filtering -- or use fixed trigger-response mappings that are brittle to leakage and post-hoc adaptation. We propose Dual-Layer Nested Fingerprinting (DNF), a black-box method that embeds a hierarchical backdoor by coupling domain-specific stylistic cues with implicit semantic triggers. Across Mistral-7B, LLaMA-3-8B-Instruct, and Falcon3-7B-Instruct, DNF achieves perfect fingerprint activation while preserving downstream utility. Compared with existing methods, it uses lower-perplexity triggers, remains undetectable under fingerprint detection attacks, and is relatively robust to incremental fine-tuning and model merging. These results position DNF as a practical, stealthy, and resilient solution for LLM ownership verification and intellectual property protection.

Few-shot anomaly detection remains challenging due to limited training data. Multi-modal anomaly detection (MAD) offers a viable solution, leveraging 3D geometric cues to enrich 2D RGB representations and compensate for this scarcity. However, existing MAD methods apply spatially uniform feature processing, conflating stable macroscopic structures with high-frequency localized defect signals, exacerbating cross-modal misalignment and inflating false-positive rates. To overcome this, we present CMDS-AD, a Cross-Modal Dual-Stream Anomaly Detection framework. A LoRA-guided diffusion model generates diverse RGB samples to mitigate extreme data scarcity. For 3D normal augmentation, we employ a pre-trained diffusion model as a normal estimator. Crucially, this estimator inherently acts as a non-linear low-pass filter, directly extracting low-frequency normal representations from RGB inputs. This establishes an auxiliary estimated stream of purely low-frequency information, anchoring robust structural templates and assisting the uncompressed real stream, containing coupled high- and low-frequency components, to precisely isolate micro-defects. A Coordinate-Aware Hierarchical Feature Mapper adaptively aligns cross-modal semantics, while a multiplicative scoring mechanism filters modality-specific noise. Under the extreme 1-shot setting, CMDS-AD achieves absolute performance gains of 5.7% (I-AUROC) and 2.0% (AUPRO) on MVTec 3D-AD, alongside 7.7% and 5.6% improvements on EyeCandies, establishing a new state-of-the-art. Code is available at https://github.com/Junhaocai27/CMDS-AD

Detecting emotional inconsistency across modalities is a key challenge in affective computing, as speech and text often convey conflicting cues. Existing approaches generally rely on incomplete emotion representations and employ unconditional fusion, which weakens performance when modalities are inconsistent. Moreover, little prior work explicitly addresses inconsistency detection itself. We propose InconVAD, a two-stage framework grounded in the Valence/Arousal/Dominance (VAD) space. In the first stage, independent uncertainty-aware models yield robust unimodal predictions. In the second stage, a classifier identifies cross-modal inconsistency and selectively integrates consistent signals. Extensive experiments show that InconVAD surpasses existing methods in both multimodal emotion inconsistency detection and modeling, offering a more reliable and interpretable solution for emotion analysis.

Multimodal sarcasm detection requires resolving pragmatic incongruity across textual, acoustic, and visual cues through cross-modal reasoning. To enable robust sarcasm reasoning with foundation models, we propose SarcasmMiner, a reinforcement learning based post-training framework that resists hallucination in multimodal reasoning. We reformulate sarcasm detection as structured reasoning and adopt a dual-track distillation strategy: high-quality teacher trajectories initialize the student model, while the full set of trajectories trains a generative reward model (GenRM) to evaluate reasoning quality. The student is optimized with group relative policy optimization (GRPO) using decoupled rewards for accuracy and reasoning quality. On MUStARD++, SarcasmMiner increases F1 from 59.83% (zero-shot), 68.23% (supervised finetuning) to 70.22%. These findings suggest that reasoning-aware reward modeling enhances both performance and multimodal grounding.

Spatial VLMs have made substantial progress in geometric perception, yet complex spatial reasoning requiring multi-step inference over depth, distance, and scene relations remains challenging. Moreover, different spatial queries call for fundamentally different strategies: some are best addressed through purely linguistic, step-by-step deduction, while others require explicit 3D grounding before quantitative inference. We present Dual-Path Spatial Reasoning via Reinforcement Learning for Spatial VLMs (SR-REAL), a unified framework that equips a spatial VLM with two complementary reasoning paths: Language-Only Reasoning (LOR), which performs step-by-step linguistic deduction, and Detect-Then-Reason (DTR), which detects 3D geometric cues (e.g., centers or bounding boxes) via region tokens before explicit geometric inference. SR-REAL begins with a cold-start supervised fine-tuning stage that constructs LOR and DTR chain-of-thought supervision and exposes a region-to-3D interface, followed by RL that optimizes the policy model with accuracy and format rewards; for DTR, a discrete center-based detection reward further refines geometric alignment. Across diverse spatial benchmarks, SR-REAL significantly outperforms spatial VLM baselines: (i) a single RL-trained model supports both reasoning paths, with DTR excelling in region-aware tasks through precise 3D localization and LOR enhancing general spatial reasoning; (ii) jointly training both paths fosters mutual reinforcement; (iii) high-quality, blended cold-start data is crucial for stable RL optimization; and (iv) the model generalizes across datasets and domains without per-task tuning, demonstrating positive transfer between LOR and DTR.

Medical vision-language models (VLMs) require confidence that reflects both answer correctness and patient-specific visual evidence. Recent GRPO-based methods optimize verbalized confidence together with answer generation. However, this joint optimization may interfere with answer learning and drive confidence toward near-binary values. Verbalized confidence also provides no explicit assessment of visual support. We therefore separate capability learning from confidence estimation and propose DualRead. DualRead builds on the insight that reliability can be read from the actor's internal states at critical moments in the answering process. It freezes the GRPO-trained actor and combines pre-answer solvability with a post-answer assessment of the generated answer and its visual support. To further assess whether confidence reflects visual grounding, we introduce Counterfactual Confidence Grounding AUC (CCG-AUC). It measures whether confidence decreases when real-image substitution changes the actor from correct to incorrect. Across two VLM backbones and both in- and out-of-distribution medical VQA benchmarks, DualRead improves correctness discrimination and calibration over verbalized confidence while preserving answer accuracy. CCG-AUC reveals whether confidence responds to answer-relevant visual evidence rather than primarily to non-visual cues.

Text-to-image diffusion models achieve high visual fidelity, yet fine-grained affective control remains difficult because textual emotion cues often fail to specify the visual perceptual factors underlying affective expression. Existing visual-affect datasets are likewise often limited to discrete labels, specific domains, or limited supervision of perceptual attributes. We introduce EmoScene, a large-scale dual-space dataset for controllable affective image generation, containing 1.2M images across more than 300 scene categories. Its affective space jointly represents discrete emotions and continuous valence--arousal--dominance (VAD), its perceptual space records measurable appearance attributes, and contextual descriptions ground both in scene semantics. EmoScene combines multi-model annotation with human-in-the-loop quality control. A random audit of 30,519 images yields 91.22\% agreement on discrete emotion labels, while an independent multi-rater evaluation yields Fleiss' κ=0.85. After controlling for source and scene composition, affective dimensions and perceptual attributes exhibit stable associations across data sources, reflecting statistical tendencies rather than deterministic visual rules. To demonstrate the dataset's utility, we further develop AffectCtrl, which learns residuals in the conditioning space of frozen diffusion models to support categorical emotion generation and continuous control over VAD, brightness, and saturation. AffectCtrl achieves 85.75\% categorical emotion accuracy, outperforms EmotiCrafter in valence and arousal control under a shared evaluation protocol, and obtains Pearson correlations of 0.673--0.765 across all five continuous axes. These results demonstrate that EmoScene provides a scalable data foundation for analyzing and controlling affective expression in visual generation.

Understanding human gaze behavior is essential for complex scene comprehension and human-computer interaction. Traditional gaze following models are typically restricted to pure spatial localization, lacking the high-level capacity to reason about semantic targets or complex social contexts. Furthermore, these models often process individuals sequentially, requiring redundant computations over the same scene image for multi-person inference. While recent Vision-Language Models (VLMs) offer the exceptional semantic reasoning needed to address gaze-related semantic tasks, their reliance on discrete text generation inherently limits precision in continuous spatial tasks like gaze localization. To bridge this gap, we propose OmniGF, a unified vision-language framework that adapts foundational VLMs for highly scalable multi-person gaze reasoning. The model adopts a dual-branch decoding strategy: a structured language branch generates discrete reasoning states, while a continuous spatial branch directly taps into the VLM's dense hidden states. Supervising these extracted representations with high-resolution gaze target heatmaps effectively overcomes the spatial bottleneck of text-only coordinate generation. Furthermore, to explicitly ground the model in multi-person scenes, we augment the input with head embeddings encoded from cropped head images, providing fine-grained appearance and orientation cues for all individuals simultaneously. By modeling all individuals and leveraging the strong semantic capability of VLMs, OmniGF seamlessly integrates precise spatial gaze target estimation, semantic gaze prediction, and complex social gaze reasoning. Extensive experiments demonstrate that our framework establishes new state-of-the-art performance across multiple standard benchmarks. Code is available at https://github.com/cvlab-stonybrook/omnigf.

3D reconstruction from in-the-wild images remains a challenging task due to inconsistent lighting conditions and transient distractors. Existing methods typically rely on heuristic strategies to handle the low-quality training data, which often struggle to produce stable and consistent reconstructions, frequently resulting in visual artifacts. In this work, we propose Asymmetric Dual 3DGS, a novel framework that leverages the stochastic nature of these artifacts: they tend to vary across different training runs due to minor randomness. Specifically, our method trains two 3D Gaussian Splatting (3DGS) models in parallel, enforcing a consistency constraint that encourages convergence on reliable scene geometry while suppressing inconsistent artifacts. To prevent the two models from collapsing into similar failure modes due to confirmation bias, we introduce a divergent masking strategy that applies two complementary masks: a multi-cue adaptive mask and a self-supervised soft mask, which leads to an asymmetric training process of the two models, reducing shared error modes. In addition, to improve the efficiency of model training, we introduce a lightweight variant called Dynamic EMA Proxy, which replaces one of the two models with a dynamically updated Exponential Moving Average (EMA) proxy, and employs an alternating masking strategy to preserve divergence. Extensive experiments on challenging real-world datasets demonstrate that our method consistently outperforms existing approaches while achieving high efficiency. Codes and trained models will be released.

Camouflaged object detection (COD) segments objects that intentionally blend with the background, so predictions depend on subtle texture and boundary cues. COD is often needed under tight on-device memory and latency budgets, making low-bit inference highly desirable. However, COD is unusually hard to quantify aggressively. We study post-training W4A4 quantization of Transformer-based COD and find a task-specific cliff: heavy-tailed background tokens dominate a shared activation range, inflating the step size and pushing weak-but-structured boundary cues into the zero bin. This exposes a token-local bottleneck -- remove cross-token range domination and bound the zero-bin mass under 4-bit activations. To address this, we introduce COD-TDQ, a COD-aware Token-group Dual-constraint activation Quantization method. COD-TDQ addresses this token-local bottleneck with two coupled steps: Direct-Sum Token-Group (DSTG) assigns token-group scales to suppress cross-token range domination, and Dual-Constraint Range Projection (DCRP) projects each token-group clip range to keep the step-to-dispersion ratio and the zero-bin mass bounded. Across four COD benchmarks and two baseline models (CFRN and ESCNet), COD-TDQ consistently achieves an Sαscore more than 0.12 higher than that of the state-of-the-art quantization method without retraining. The code will be released.

Real-time text-driven joint audio-video avatar generation requires jointly synthesizing portrait video and speech with high fidelity and precise synchronization, yet existing audio-visual diffusion models remain too slow for interactive use and often degrade noticeably after aggressive acceleration. We present Hallo-Live, a streaming framework for joint audio-visual avatar generation that combines asynchronous dual-stream diffusion with human-centric preference-guided distillation. To reduce articulation lag in causal generation, we introduce Future-Expanding Attention, which allows each video block to access synchronous audio together with a short horizon of future phonetic cues. To mitigate the quality loss of few-step distillation, we further propose Human-Centric Preference-Guided DMD (HP-DMD), which reweights training samples using rewards from visual fidelity, speech naturalness, and audio-visual synchronization. On two NVIDIA H200 GPUs, Hallo-Live runs at 20.38 FPS with 0.94 seconds latency, yielding 16.0x higher throughput and 99.3x lower latency than the teacher model Ovi. Despite this speedup, it retains strong generation quality, reaching comparable VideoAlign overall score and Sync Confidence score while outperforming other accelerated baselines in the overall quality-efficiency trade-off. Qualitative results further show robust generalization across photorealistic, multi-speaker, and stylized scenarios. To the best of our knowledge, Hallo-Live is the first framework to combine streaming dual-stream diffusion with preference-guided distillation for real-time, text-driven audio-visual generation.

Understanding 3D scenes goes beyond simply recognizing objects; it requires reasoning about the spatial and semantic relationships between them. Current 3D scene-language models often struggle with this relational understanding, particularly when visual embeddings alone do not adequately convey the roles and interactions of objects. In this paper, we introduce Descrip3D, a novel and powerful framework that explicitly encodes the relationships between objects using natural language. Unlike previous methods that rely only on 2D and 3D embeddings, Descrip3D enhances each object with a textual description that captures both its intrinsic attributes and contextual relationships. These relational cues are incorporated into the model through a dual-level integration: embedding fusion and prompt-level injection. This allows for unified reasoning across various tasks such as grounding, captioning, and question answering, all without the need for task-specific heads or additional supervision. When evaluated on five benchmark datasets, including ScanRefer, Multi3DRefer, ScanQA, SQA3D, and Scan2Cap, Descrip3D consistently outperforms strong baseline models, demonstrating the effectiveness of language-guided relational representation for understanding complex indoor scenes.

Most instruction-driven 3D editing methods rely on 2D models to guide the explicit and iterative optimization of 3D representations. This paradigm, however, suffers from two primary drawbacks. First, it lacks a universal design of different 3D editing tasks because the explicit manipulation of 3D geometry necessitates task-dependent rules, e.g., 3D appearance editing demands inherent source 3D geometry, while 3D removal alters source geometry. Second, the iterative optimization process is highly time-consuming, often requiring thousands of invocations of 2D/3D updating. We present Omni-3DEdit, a unified, learning-based model that generalizes various 3D editing tasks implicitly. One key challenge to achieve our goal is the scarcity of paired source-edited multi-view assets for training. To address this issue, we construct a data pipeline, synthesizing a relatively rich number of high-quality paired multi-view editing samples. Subsequently, we adapt the pre-trained generative model SEVA as our backbone by concatenating source view latents along with conditional tokens in sequence space. A dual-stream LoRA module is proposed to disentangle different view cues, largely enhancing our model's representational learning capability. As a learning-based model, our model is free of the time-consuming online optimization, and it can complete various 3D editing tasks in one forward pass, reducing the inference time from tens of minutes to approximately two minutes. Extensive experiments demonstrate the effectiveness and efficiency of Omni-3DEdit.

Immersive virtual reality (VR) applications demand accurate, temporally coherent full-body pose tracking. Recent head-mounted camera-based approaches show promise in egocentric pose estimation, but encounter challenges when applied to VR head-mounted displays (HMDs), including temporal instability, inaccurate lower-body estimation, and the lack of real-time performance. To address these limitations, we present EgoPoseVR, an end-to-end framework for accurate egocentric full-body pose estimation in VR that integrates headset motion cues with egocentric RGB-D observations through a dual-modality fusion pipeline. A spatiotemporal encoder extracts frame- and joint-level representations, which are fused via cross-attention to fully exploit complementary motion cues across modalities. A kinematic optimization module then imposes constraints from HMD signals, enhancing the accuracy and stability of pose estimation. To facilitate training and evaluation, we introduce a large-scale synthetic dataset of over 1.8 million temporally aligned HMD and RGB-D frames across diverse VR scenarios. Experimental results show that EgoPoseVR outperforms state-of-the-art egocentric pose estimation models. A user study in real-world scenes further shows that EgoPoseVR achieved significantly higher subjective ratings in accuracy, stability, embodiment, and intention for future use compared to baseline methods. These results show that EgoPoseVR enables robust full-body pose tracking, offering a practical solution for accurate VR embodiment without requiring additional body-worn sensors or room-scale tracking systems.

Adapting large-scale pre-trained video generators for Video Super-Resolution (VSR) in novel domains remains computationally prohibitive. Methods that reformulate generation as direct Low-Quality to High-Quality mappings deviate from the original generative formulation, demanding extensive fine-tuning. ControlNet-style adapters lose their efficiency under modern Diffusion Transformers since the absence of encoder-decoder hierarchy forces duplication of the entire backbone. We observe that flow matching offers a principled alternative for cross-domain VSR adaptation. By predicting a constant velocity field across all timesteps, the adaptation task reduces to learning a fixed injection pattern rather than time-varying transformations. Building on this insight, we propose LiteVSR, a minimalist framework that performs VSR using a completely frozen Diffusion Transformer with a lightweight State-Aware Adapter. The adapter employs a dual-stream architecture that extracts static structural cues from the LQ input and dynamic cues from intermediate denoising states, aligning them through time-dependent cross-attention to enable adaptive transition from structural alignment to texture refinement as denoising proceeds. LiteVSR achieves competitive restoration quality with only 11.25% trainable parameters and 12 GPU-hours of training on a single A100, while maintaining fast sampling (down to a single step) compatibility.

Graphical User Interface (GUI) agents powered by Multimodal Large Language Models (MLLMs) promise human-like interaction with software applications, yet long-horizon tasks remain challenging due to memory limitations. Existing approaches either truncate history or rely on simple textual summaries, which risk losing critical information when past visual details become necessary for future decisions. In this paper, we propose PAL-UI (Planning with Active Look-back), a novel framework that enables GUI agents to adaptively retrieve past observations when required. PAL-UI combines a dual-level summarization agent, capturing both observation-level cues and action-level outcomes, with a dedicated retrieval tool that allows the agent to recall specific historical screenshots during planning. We curate a step-level instruction dataset of 8.6K samples from mobile GUI navigation trajectories and train PAL-UI-3B and PAL-UI-7B models based on Qwen2.5-VL. Extensive experiments demonstrate that PAL-UI significantly outperforms baseline models and prior methods in mobile GUI navigation tasks, even under data-efficient settings. Moreover, PAL-UI exhibits strong cross-domain generalization, achieving notable improvements in web navigation without additional training. Our work highlights the potential of active memory retrieval for long-horizon planning capabilities of vision-based GUI agents.

Mesh seams play a pivotal role in partitioning 3D surfaces for UV parametrization and texture mapping. Poorly placed seams often result in severe UV distortion or excessive fragmentation, thereby hindering texture synthesis and disrupting artist workflows. Existing methods frequently trade one failure mode for another-producing either high distortion or many scattered islands. To address this, we introduce SeamCrafter, an autoregressive GPT-style seam generator conditioned on point cloud inputs. SeamCrafter employs a dual-branch point-cloud encoder that disentangles and captures complementary topological and geometric cues during pretraining. To further enhance seam quality, we fine-tune the model using Direct Preference Optimization (DPO) on a preference dataset derived from a novel seam-evaluation framework. This framework assesses seams primarily by UV distortion and fragmentation, and provides pairwise preference labels to guide optimization. Extensive experiments demonstrate that SeamCrafter produces seams with substantially lower distortion and fragmentation than prior approaches, while preserving topological consistency and visual fidelity.

Recent video diffusion models have made remarkable strides in visual quality, yet precise, fine-grained control remains a key bottleneck that limits practical customizability for content creation. For AI video creators, three forms of control are crucial: (i) scene composition, (ii) multi-view consistent subject customization, and (iii) camera-pose or object-motion adjustment. Existing methods typically handle these dimensions in isolation, with limited support for multi-view subject synthesis and identity preservation under arbitrary pose changes. This lack of a unified architecture makes it difficult to support versatile, jointly controllable video. We introduce Tri-Prompting, a unified framework and two-stage training paradigm that integrates scene composition, multi-view subject consistency, and motion control. Our approach leverages a dual-condition motion module driven by 3D tracking points for background scenes and downsampled RGB cues for foreground subjects. To ensure a balance between controllability and visual realism, we further propose an inference ControlNet scale schedule. Tri-Prompting supports novel workflows, including 3D-aware subject insertion into any scenes and manipulation of existing subjects in an image. Experimental results demonstrate that Tri-Prompting significantly outperforms specialized baselines such as Phantom and DaS in multi-view subject identity, 3D consistency, and motion accuracy.

Recent multimodal large language models (MLLMs) have made remarkable progress in visual understanding and language-based reasoning, yet they lack a persistent world-centered representation for spatially consistent reasoning in 3D environments. Inspired by the mammalian dual-stream system, where semantic and spatial cues are processed separately and integrated into an allocentric cognitive map, we propose SpaceMind++, a video MLLM architecture that explicitly builds a voxelized cognitive map from RGB videos. This map reorganizes fragmented egocentric observations into a shared 3D metric representation, enabling the model to preserve object permanence and spatial topology across changing viewpoints. To make this allocentric representation usable by a pretrained video MLLM without disrupting its native visual-token interface, we introduce Coordinate-Guided Deep Iterative Fusion, a new mechanism that relays map-level spatial knowledge back into the original 2D visual features. This fusion is explicitly guided by coordinate embeddings and 3D Rotary Positional Encoding, which ground semantic interactions in metric 3D space, resembling the entorhinal binding of sensory features to metric space. Extensive experiments show that SpaceMind++ achieves new state-of-the-art performance on VSI-Bench. Furthermore, it demonstrates superior out-of-distribution generalization on SPBench, SITE-Bench, and SPAR-Bench, underscoring its robustness in unseen 3D environments.

Medical video generation has transformative potential for enhancing surgical understanding and pathology insights through precise and controllable visual representations. However, current models face limitations in controllability and authenticity. To bridge this gap, we propose SurgSora, a motion-controllable surgical video generation framework that uses a single input frame and user-controllable motion cues. SurgSora consists of three key modules: the Dual Semantic Injector (DSI), which extracts object-relevant RGB and depth features from the input frame and integrates them with segmentation cues to capture detailed spatial features of complex anatomical structures; the Decoupled Flow Mapper (DFM), which fuses optical flow with semantic-RGB-D features at multiple scales to enhance temporal understanding and object spatial dynamics; and the Trajectory Controller (TC), which allows users to specify motion directions and estimates sparse optical flow, guiding the video generation process. The fused features are used as conditions for a frozen Stable Diffusion model to produce realistic, temporally coherent surgical videos. Extensive evaluations demonstrate that SurgSora outperforms state-of-the-art methods in controllability and authenticity, showing its potential to advance surgical video generation for medical education, training, and research.

Recently, masked video modeling has been widely explored and significantly improved the model's understanding ability of visual regions at a local level. However, existing methods usually adopt random masking and follow the same reconstruction paradigm to complete the masked regions, which do not leverage the correlations between cross-modal content. In this paper, we present Mask for Semantics Completion (MASCOT) based on semantic-based masked modeling. Specifically, after applying attention-based video masking to generate high-informed and low-informed masks, we propose Informed Semantics Completion to recover masked semantics information. The recovery mechanism is achieved by aligning the masked content with the unmasked visual regions and corresponding textual context, which makes the model capture more text-related details at a patch level. Additionally, we shift the emphasis of reconstruction from irrelevant backgrounds to discriminative parts to ignore regions with low-informed masks. Furthermore, we design dual-mask co-learning to incorporate video cues under different masks and learn more aligned video representation. Our MASCOT performs state-of-the-art performance on four major text-video retrieval benchmarks, including MSR-VTT, LSMDC, ActivityNet, and DiDeMo. Extensive ablation studies demonstrate the effectiveness of the proposed schemes.

We propose X-NeMo, a novel zero-shot diffusion-based portrait animation pipeline that animates a static portrait using facial movements from a driving video of a different individual. Our work first identifies the root causes of the key issues in prior approaches, such as identity leakage and difficulty in capturing subtle and extreme expressions. To address these challenges, we introduce a fully end-to-end training framework that distills a 1D identity-agnostic latent motion descriptor from driving image, effectively controlling motion through cross-attention during image generation. Our implicit motion descriptor captures expressive facial motion in fine detail, learned end-to-end from a diverse video dataset without reliance on pretrained motion detectors. We further enhance expressiveness and disentangle motion latents from identity cues by supervising their learning with a dual GAN decoder, alongside spatial and color augmentations. By embedding the driving motion into a 1D latent vector and controlling motion via cross-attention rather than additive spatial guidance, our design eliminates the transmission of spatial-aligned structural clues from the driving condition to the diffusion backbone, substantially mitigating identity leakage. Extensive experiments demonstrate that X-NeMo surpasses state-of-the-art baselines, producing highly expressive animations with superior identity resemblance. Our code and models are available for research.

Generating lifelike conversational avatars requires modeling not just isolated speakers, but the dynamic, reciprocal interaction of speaking and listening. However, modeling the listener is exceptionally challenging: direct audio-driven training fails, producing stiff, static listening motions. This failure stems from a fundamental imbalance: the speaker's motion is strongly driven by speech audio, while the listener's motion primarily follows an internal motion prior and is only loosely guided by external speech. This challenge has led most methods to focus on speak-only generation. The only prior attempt at joint generation relies on extra speaker's motion to produce the listener. This design is not end-to-end, thereby hindering the real-time applicability. To address this limitation, we present UniLS, the first end-to-end framework for generating unified speak-listen expressions, driven by only dual-track audio. Our method introduces a novel two-stage training paradigm. Stage 1 first learns the internal motion prior by training an audio-free autoregressive generator, capturing the spontaneous dynamics of natural facial motion. Stage 2 then introduces the dual-track audio, fine-tuning the generator to modulate the learned motion prior based on external speech cues. Extensive evaluations show UniLS achieves state-of-the-art speaking accuracy. More importantly, it delivers up to 44.1\% improvement in listening metrics, generating significantly more diverse and natural listening expressions. This effectively mitigates the stiffness problem and provides a practical, high-fidelity audio-driven solution for interactive digital humans.

We present TokenSplat, a feed-forward framework for joint 3D Gaussian reconstruction and camera pose estimation from unposed multi-view images. At its core, TokenSplat introduces a Token-aligned Gaussian Prediction module that aligns semantically corresponding information across views directly in the feature space. Guided by coarse token positions and fusion confidence, it aggregates multi-scale contextual features to enable long-range cross-view reasoning and reduce redundancy from overlapping Gaussians. To further enhance pose robustness and disentangle viewpoint cues from scene semantics, TokenSplat employs learnable camera tokens and an Asymmetric Dual-Flow Decoder (ADF-Decoder) that enforces directionally constrained communication between camera and image tokens. This maintains clean factorization within a feed-forward architecture, enabling coherent reconstruction and stable pose estimation without iterative refinement. Extensive experiments demonstrate that TokenSplat achieves higher reconstruction fidelity and novel-view synthesis quality in pose-free settings, and significantly improves pose estimation accuracy compared to prior pose-free methods. Project page: https://kidleyh.github.io/tokensplat/.

Long-form video generation requires recurring subjects to remain consistent across various shots, viewpoints, motions, and scene transitions. Existing temporal decomposition methods improve scalability by generating videos shot by shot. However, they mainly focus on optimizing plausible next-shot continuations without verifying whether the historical memory preserves identity-critical subject evidence. Consequently, as generation proceeds, recurring subjects may be diluted, overwritten, or forgotten. In this paper, we propose Memento, a subject-reconstruction-guided framework that treats subject preservation as an explicit identity grounding problem, based on the premise that a memory bank faithfully preserving a subject should support reconstructing that subject from memory alone. Specifically, Memento jointly trains autoregressive next-shot generation with memory-based subject reconstruction, recovering target appearances using historical memory and global story captions. To disentangle long-range subject evidence from short-range cues, Memento introduces a dual-query memory mechanism, where one query retrieves identity-relevant memory and the other selects short-context keyframes for coherent continuation. Additionally, a subject-aware cinematic data pipeline provides precise reconstruction supervision via consistent, pronoun-free subject descriptions. Experiments demonstrate that Memento achieves state-of-the-art performance in long-term subject consistency, cross-shot coherence, and visual quality.

Long streaming video QA remains challenging due to growing visual tokens and limited reasoning length of large language models (LLMs). KV-caching stores the Key-Value (KV) of the historical tokens via LLM prefill and enables more efficient streaming QA. However, existing methods cache every one or two frames, causing redundant memory usage and losing fine-grained spatial details within frame or temporal contexts across frames. This paper proposes MuKV, a method that features a multi-grained KV cache compression module and a semi-hierarchical retrieval approach to improve both efficiency and accuracy for long streaming VideoQA. For the offline KV cache, MuKV extracts visual representations at patch-, frame-, and segment-levels. The multiple levels of granularity preserve both local cues and global temporal context, while maintaining efficiency with a dual signal token compression mechanism guided by self-attention and frequency. For online QA, MuKV designs a semi-hierarchical retrieval method to retrieve relevant KV caches for answer generation. Experiments on long-streaming VideoQA benchmarks show that MuKV significantly improves answer accuracy, without sacrificing memory and online QA efficiency. Moreover, our compression mechanism alone brings consistent benefits across answer accuracy, memory, and QA efficiency over baselines, showcasing highly effective contribution.

Cross-domain face retargeting requires disentangled control over identity, expressions, and domain-specific stylistic attributes. Existing methods, typically trained on real-world faces, either fail to generalize across domains, need test-time optimizations, or require fine-tuning with carefully curated multi-style datasets to achieve domain-invariant identity representations. In this work, we introduce StyleYourSmile, a novel one-shot cross-domain face retargeting method that eliminates the need for curated multi-style paired data. We propose an efficient data augmentation strategy alongside a dual-encoder framework, for extracting domain-invariant identity cues and capturing domain-specific stylistic variations. Leveraging these disentangled control signals, we condition a diffusion model to retarget facial expressions across domains. Extensive experiments demonstrate that StyleYourSmile achieves superior identity preservation and retargeting fidelity across a wide range of visual domains.

Event cameras provide microsecond latency, making them suitable for 6D object pose tracking in fast, dynamic scenes where conventional RGB and depth pipelines suffer from motion blur and large pixel displacements. We introduce EventTrack6D, an event-depth tracking framework that generalizes to novel objects without object-specific training by reconstructing both intensity and depth at arbitrary timestamps between depth frames. Conditioned on the most recent depth measurement, our dual reconstruction recovers dense photometric and geometric cues from sparse event streams. Our EventTrack6D operates at over 120 FPS and maintains temporal consistency under rapid motion. To support training and evaluation, we introduce a comprehensive benchmark suite: a large-scale synthetic dataset for training and two complementary evaluation sets, including real and simulated event datasets. Trained exclusively on synthetic data, EventTrack6D generalizes effectively to real-world scenarios without fine-tuning, maintaining accurate tracking across diverse objects and motion patterns. Our method and datasets validate the effectiveness of event cameras for event-based 6D pose tracking of novel objects. Code and datasets are publicly available at https://chohoonhee.github.io/Event6D.

We introduce Stereo Anywhere, a novel stereo-matching framework that combines geometric constraints with robust priors from monocular depth Vision Foundation Models (VFMs). By elegantly coupling these complementary worlds through a dual-branch architecture, we seamlessly integrate stereo matching with learned contextual cues. Following this design, our framework introduces novel cost volume fusion mechanisms that effectively handle critical challenges such as textureless regions, occlusions, and non-Lambertian surfaces. Through our novel optical illusion dataset, MonoTrap, and extensive evaluation across multiple benchmarks, we demonstrate that our synthetic-only trained model achieves state-of-the-art results in zero-shot generalization, significantly outperforming existing solutions while showing remarkable robustness to challenging cases such as mirrors and transparencies.

Existing works in single-image human reconstruction suffer from weak generalizability due to insufficient training data or 3D inconsistencies for a lack of comprehensive multi-view knowledge. In this paper, we introduce MagicMan, a human-specific multi-view diffusion model designed to generate high-quality novel view images from a single reference image. As its core, we leverage a pre-trained 2D diffusion model as the generative prior for generalizability, with the parametric SMPL-X model as the 3D body prior to promote 3D awareness. To tackle the critical challenge of maintaining consistency while achieving dense multi-view generation for improved 3D human reconstruction, we first introduce hybrid multi-view attention to facilitate both efficient and thorough information interchange across different views. Additionally, we present a geometry-aware dual branch to perform concurrent generation in both RGB and normal domains, further enhancing consistency via geometry cues. Last but not least, to address ill-shaped issues arising from inaccurate SMPL-X estimation that conflicts with the reference image, we propose a novel iterative refinement strategy, which progressively optimizes SMPL-X accuracy while enhancing the quality and consistency of the generated multi-views. Extensive experimental results demonstrate that our method significantly outperforms existing approaches in both novel view synthesis and subsequent 3D human reconstruction tasks.

Video inpainting, which aims to restore corrupted video content, has experienced substantial progress. Despite these advances, existing methods, whether propagating unmasked region pixels through optical flow and receptive field priors, or extending image-inpainting models temporally, face challenges in generating fully masked objects or balancing the competing objectives of background context preservation and foreground generation in one model, respectively. To address these limitations, we propose a novel dual-stream paradigm VideoPainter that incorporates an efficient context encoder (comprising only 6% of the backbone parameters) to process masked videos and inject backbone-aware background contextual cues to any pre-trained video DiT, producing semantically consistent content in a plug-and-play manner. This architectural separation significantly reduces the model's learning complexity while enabling nuanced integration of crucial background context. We also introduce a novel target region ID resampling technique that enables any-length video inpainting, greatly enhancing our practical applicability. Additionally, we establish a scalable dataset pipeline leveraging current vision understanding models, contributing VPData and VPBench to facilitate segmentation-based inpainting training and assessment, the largest video inpainting dataset and benchmark to date with over 390K diverse clips. Using inpainting as a pipeline basis, we also explore downstream applications including video editing and video editing pair data generation, demonstrating competitive performance and significant practical potential. Extensive experiments demonstrate VideoPainter's superior performance in both any-length video inpainting and editing, across eight key metrics, including video quality, mask region preservation, and textual coherence.

Dexterous manipulation with contact-rich interactions is crucial for advanced robotics. While recent diffusion-based planning approaches show promise for simple manipulation tasks, they often produce unrealistic ghost states (e.g., the object automatically moves without hand contact) or lack adaptability when handling complex sequential interactions. In this work, we introduce DexHandDiff, an interaction-aware diffusion planning framework for adaptive dexterous manipulation. DexHandDiff models joint state-action dynamics through a dual-phase diffusion process which consists of pre-interaction contact alignment and post-contact goal-directed control, enabling goal-adaptive generalizable dexterous manipulation. Additionally, we incorporate dynamics model-based dual guidance and leverage large language models for automated guidance function generation, enhancing generalizability for physical interactions and facilitating diverse goal adaptation through language cues. Experiments on physical interaction tasks such as door opening, pen and block re-orientation, object relocation, and hammer striking demonstrate DexHandDiff's effectiveness on goals outside training distributions, achieving over twice the average success rate (59.2% vs. 29.5%) compared to existing methods. Our framework achieves an average of 70.7% success rate on goal adaptive dexterous tasks, highlighting its robustness and flexibility in contact-rich manipulation.

Recent advances in diffusion-based controllable visual generation have led to remarkable improvements in image quality. However, these powerful models are typically deployed on cloud servers due to their large computational demands, raising serious concerns about user data privacy. To enable secure and efficient on-device generation, we explore in this paper controllable diffusion models built upon linear attention architectures, which offer superior scalability and efficiency, even on edge devices. Yet, our experiments reveal that existing controllable generation frameworks, such as ControlNet and OminiControl, either lack the flexibility to support multiple heterogeneous condition types or suffer from slow convergence on such linear-attention models. To address these limitations, we propose a novel controllable diffusion framework tailored for linear attention backbones like SANA. The core of our method lies in a unified gated conditioning module working in a dual-path pipeline, which effectively integrates multi-type conditional inputs, such as spatially aligned and non-aligned cues. Extensive experiments on multiple tasks and benchmarks demonstrate that our approach achieves state-of-the-art controllable generation performance based on linear-attention models, surpassing existing methods in terms of fidelity and controllability.

Translating text embedded in Web images is crucial for improving content accessibility and cross-lingual information retrieval, particularly within social media and e-commerce domains. Although Large Vision-Language Models (LVLMs) have advanced multimodal understanding, applying them to Web image translation remains challenging due to the visual representation gap: standard encoders often prioritize high-level semantics over the fine-grained visual details required for recognizing diverse character morphologies. To address this challenge, we propose VaaWIT, an end-to-end framework that adapts Large Language Models for multilingual Web image translation. The framework introduces two key technical contributions: (1) a Dual-Stream Attention Module (DSAM), which facilitates bidirectional interaction between multilingual semantic features and detailed visual representations, thereby synthesizing unified features robust to textual variations; and (2) a Visual-Aware Adapter (VAA), a parameter-efficient fine-tuning strategy that dynamically injects these fused visual cues into the frozen LLM backbone. This design enables the model to align the visual context with linguistic reasoning effectively while minimizing computational costs. Extensive experiments on eight tasks on three public benchmarks demonstrate that VaaWIT significantly outperforms state-of-the-art (SOTA) open-source baselines and achieves competitive performance against proprietary models. These results validate the efficacy of integrating fine-grained visual perception into LLMs for complex Web content analysis.

Egocentric 3D human pose estimation remains challenging due to severe perspective distortion, limited body visibility, and complex camera motion inherent in first-person viewpoints. Existing methods typically rely on single-frame analysis or limited temporal fusion, which fails to effectively leverage the rich motion context available in egocentric videos. We introduce AG-EgoPose, a novel dual-stream framework that integrates short- and long-range motion context with fine-grained spatial cues for robust pose estimation from fisheye camera input. Our framework features two parallel streams: A spatial stream uses a weight-sharing ResNet-18 encoder-decoder to generate 2D joint heatmaps and corresponding joint-specific spatial feature tokens. Simultaneously, a temporal stream uses a ResNet-50 backbone to extract visual features, which are then processed by an action recognition backbone to capture the motion dynamics. These complementary representations are fused and refined in a transformer decoder with learnable joint tokens, which allows for the joint-level integration of spatial and temporal evidence while maintaining anatomical constraints. Experiments on real-world datasets demonstrate that AG-EgoPose achieves state-of-the-art performance in both quantitative and qualitative metrics. Code is available at: https://github.com/Mushfiq5647/AG-EgoPose.

Multimodal Recommender Systems (MMRS) leverage rich item features to mitigate data sparsity, yet similarity-driven graph construction and propagation can favor semantically similar substitutes over functionally related complements. When behavioral associations connect semantically distant items, complementary signals can remain geometrically isolated, yielding fragmented "Similarity Islands" and semantic drift when standard propagation is applied. To overcome these limitations, we propose MAGE (Manifold-Augmented Graph Embedding), a framework for personalized multimodal ranking that decouples complementarity modeling into offline geometric warping and online topological propagation. The offline phase enhances item representations by extracting complement-aware residual directions via a Soft Conceptor mechanism and injecting them under a local gap-preserving constraint, incorporating co-purchase evidence while controlling the magnitude of geometric perturbation. Synergistically, the online phase employs an asymmetric dual-stream GNN that treats visual features as stable anchors and augmented textual features as flexible probes, fused through a self-calibrated cross-modal mechanism to reconcile shared semantics and modality-specific residual cues. Extensive experiments on four Amazon datasets show that MAGE yields consistent improvements over strong multimodal recommendation baselines. Together with the supporting analyses in the appendix, these results suggest that geometry-aware augmentation can alleviate the semantic mismatch that arises in complementary recommendation settings. Our code is available at https://github.com/Alex-bupt/mage.

Diffusion-based methods have achieved prominent success in generating 2D media. However, accomplishing similar proficiencies for scene-level mesh texturing in 3D spatial applications, e.g., XR/VR, remains constrained, primarily due to the intricate nature of 3D geometry and the necessity for immersive free-viewpoint rendering. In this paper, we propose a novel indoor scene texturing framework, which delivers text-driven texture generation with enchanting details and authentic spatial coherence. The key insight is to first imagine a stylized 360{\deg} panoramic texture from the central viewpoint of the scene, and then propagate it to the rest areas with inpainting and imitating techniques. To ensure meaningful and aligned textures to the scene, we develop a novel coarse-to-fine panoramic texture generation approach with dual texture alignment, which both considers the geometry and texture cues of the captured scenes. To survive from cluttered geometries during texture propagation, we design a separated strategy, which conducts texture inpainting in confidential regions and then learns an implicit imitating network to synthesize textures in occluded and tiny structural areas. Extensive experiments and the immersive VR application on real-world indoor scenes demonstrate the high quality of the generated textures and the engaging experience on VR headsets. Project webpage: https://ybbbbt.com/publication/dreamspace

With the continuous improvements of deepfake methods, forgery messages have transitioned from single-modality to multi-modal fusion, posing new challenges for existing forgery detection algorithms. In this paper, we propose AVT2-DWF, the Audio-Visual dual Transformers grounded in Dynamic Weight Fusion, which aims to amplify both intra- and cross-modal forgery cues, thereby enhancing detection capabilities. AVT2-DWF adopts a dual-stage approach to capture both spatial characteristics and temporal dynamics of facial expressions. This is achieved through a face transformer with an n-frame-wise tokenization strategy encoder and an audio transformer encoder. Subsequently, it uses multi-modal conversion with dynamic weight fusion to address the challenge of heterogeneous information fusion between audio and visual modalities. Experiments on DeepfakeTIMIT, FakeAVCeleb, and DFDC datasets indicate that AVT2-DWF achieves state-of-the-art performance intra- and cross-dataset Deepfake detection. Code is available at https://github.com/raining-dev/AVT2-DWF.

In this paper, we claim that 3D visual grounding is the cornerstone of spatial reasoning and introduce the Grounded-Spatial Reasoner (GS-Reasoner) to explore the effective spatial representations that bridge the gap between them. Existing 3D LLMs suffer from the absence of a unified 3D representation capable of jointly capturing semantic and geometric information. This deficiency is manifested either in poor performance on grounding or in an excessive reliance on external modules, ultimately hindering the seamless integration of grounding and spatial reasoning. To address this, we propose a simple yet effective dual-path pooling mechanism that tightly aligns geometric features with both semantic and positional cues, constructing a unified image patch-based 3D representation that encapsulates all essential information without increasing the number of input tokens. Leveraging this holistic representation, GS-Reasoner is the first 3D LLM that achieves autoregressive grounding entirely without external modules while delivering performance comparable to state-of-the-art models, establishing a unified and self-contained framework for 3D spatial reasoning. To further bridge grounding and spatial reasoning, we introduce the Grounded Chain-of-Thought (GCoT) dataset. This dataset is meticulously curated to include both 3D bounding box annotations for objects referenced in reasoning questions and step-by-step reasoning paths that integrate grounding as a core component of the problem-solving process. Extensive experiments demonstrate that GS-Reasoner achieves impressive results on 3D visual grounding, which in turn significantly enhances its spatial reasoning capabilities, leading to state-of-the-art performance.

Semantic ultra high resolution image (UHR) segmentation is essential in remote sensing applications such as aerial mapping and environmental monitoring. Transformer-based models struggle in this setting because memory grows quadratically with token count, constraining either the contextual scope or the spatial resolution. We introduce CASWiT (Context-Aware Stage-Wise Transformer), a dual-branch, Swin-based architecture that injects global cues into fine-grained UHR features. A context encoder processes a downsampled neighborhood to capture long-range dependencies, while a high resolution encoder extracts detailed features from UHR patches. A cross-scale fusion module, combining cross-attention and gated feature injection, enriches high-resolution tokens with context. Beyond architecture, we propose a SimMIM-style pretraining. We mask 75% of the high-resolution image tokens and the low-resolution center region that spatially corresponds to the UHR patch, then train the shared dual-encoder with small decoder to reconstruct the UHR initial image. Extensive experiments on the large-scale IGN FLAIR-HUB aerial dataset demonstrate the effectiveness of CASWiT. Our method achieves 65.83% mIoU, outperforming RGB baselines by 1.78 points. On URUR, CASWiT achieves 49.1% mIoU, surpassing the current SoTA by +0.9% under the official evaluation protocol. All codes are provided on: https://huggingface.co/collections/heig-vd-geo/caswit.

In natural face-to-face interaction, participants seamlessly alternate between speaking and listening, producing facial behaviors (FBs) that are finely informed by long-range context and naturally exhibit contextual appropriateness and emotional rationality. Interactive Head Generation (IHG) aims to synthesize lifelike avatar head video emulating such capabilities. Existing IHG methods typically condition on dual-track signals (i.e., human user's behaviors and pre-defined audio for avatar) within a short temporal window, jointly driving generation of avatar's audio-aligned lip articulation and non-verbal FBs. However, two main challenges persist in these methods: (i) the reliance on short-clip behavioral cues without long-range contextual modeling leads them to produce facial behaviors lacking contextual appropriateness; and (ii) the entangled, role-agnostic fusion of dual-track signals empirically introduces cross-signal interference, potentially compromising lip-region synchronization during speaking. To this end, we propose ECHO, a novel IHG framework comprising two key components: a Long-range Contextual Understanding (LCU) component that facilitates contextual understanding of both behavior-grounded dynamics and linguistic-driven affective semantics to promote contextual appropriateness and emotional rationality of synthesized avatar FBs; and a block-wise Spatial-aware Decoupled Cross-attention Modulation (SDCM) module, that preserves self-audio-driven lip articulation while adaptively integrating user contextual behavioral cues for non-lip facial regions, complemented by our designed two-stage training paradigm, to jointly enhance lip synchronization and visual fidelity. Extensive experiments demonstrate the effectiveness of proposed components and ECHO's superior IHG performance.

Multi-organ segmentation in medical imaging remains challenging due to large anatomical variability, complex inter-organ dependencies, and diverse organ scales and shapes. Conventional encoder-decoder architectures often struggle to capture both fine-grained local details and long-range context, which are crucial for accurate delineation - especially for small or deformable organs. To address these limitations, we propose MD-RWKV-UNet, a dynamic encoder network that enables scale-aware representation and spatially adaptive context modeling. At its core is the MD-RWKV block, a dual-path module that integrates deformable spatial shifts with the Receptance Weighted Key Value mechanism, allowing the receptive field to adapt dynamically to local structural cues. We further incorporate Selective Kernel Attention to enable adaptive selection of convolutional kernels with varying receptive fields, enhancing multi-scale interaction and improving robustness to organ size and shape variation. In parallel, a cross-stage dual-attention fusion strategy aggregates multi-level features across the encoder, preserving low-level structure while enhancing semantic consistency. Unlike methods that stack static convolutions or rely heavily on global attention, our approach provides a lightweight yet expressive solution for dynamic organ modeling. Experiments on Synapse and ACDC demonstrate state-of-the-art performance, particularly in boundary precision and small-organ segmentation.

Multi-modal fusion has emerged as a promising paradigm for accurate 3D object detection. However, performance degrades substantially when deployed in target domains different from training. In this work, focusing on dual-branch proposal-level detectors, we identify two factors that limit robust cross-domain generalization: 1) in challenging domains such as rain or nighttime, one modality may undergo severe degradation; 2) the LiDAR branch often dominates the detection process, leading to systematic underutilization of visual cues and vulnerability when point clouds are compromised. To address these challenges, we propose three components. First, Query-Decoupled Loss provides independent supervision for 2D-only, 3D-only, and fused queries, rebalancing gradient flow across modalities. Second, LiDAR-Guided Depth Prior augments 2D queries with instance-aware geometric priors through probabilistic fusion of image-predicted and LiDAR-derived depth distributions, improving their spatial initialization. Third, Complementary Cross-Modal Masking applies complementary spatial masks to the image and point cloud, encouraging queries from both modalities to compete within the fused decoder and thereby promoting adaptive fusion. Extensive experiments demonstrate substantial gains over state-of-the-art baselines while preserving source-domain performance. Code and models are publicly available at https://github.com/IMPL-Lab/CCF.

Large Audio Language Models (LALMs) still struggle in complex acoustic scenes because they often fail to preserve task-relevant acoustic evidence before reasoning begins. We call this failure the evidence bottleneck: state-of-the-art systems show larger deficits in evidence extraction than in downstream reasoning, suggesting that the main limitation lies in upstream perception rather than reasoning policy. To address this problem, we propose EvA (Evidence-First Audio), a dual-path architecture that combines Whisper and CED-Base through non-compressive, time-aligned fusion. EvA first aggregates intermediate CED layers to preserve multi-scale acoustic cues, then aligns the aggregated CED features to the Whisper timeline and adds the two streams without changing sequence length. We also build EvA-Perception, a large-scale open-source training set with about 54K event-ordered captions (150 h) and about 500K QA pairs. Under a unified zero-shot protocol, EvA achieves the best open-source Perception scores on MMAU, MMAR, and MMSU, and improves over Kimi-Audio-7B on all reported metrics, with the largest gains on perception-heavy splits. These results support the evidence-first hypothesis: stronger audio understanding depends on preserving acoustic evidence before reasoning.

Recent advances in MLLMs are reframing segmentation from fixed-category prediction to instruction-grounded localization. While reasoning based segmentation has progressed rapidly in natural scenes, remote sensing lacks a generalizable solution due to the prohibitive cost of reasoning-oriented data and domain-specific challenges like overhead viewpoints. We present GeoSeg, a zero-shot, training-free framework that bypasses the supervision bottleneck for reasoning-driven remote sensing segmentation. GeoSeg couples MLLM reasoning with precise localization via: (i) bias-aware coordinate refinement to correct systematic grounding shifts and (ii) a dual-route prompting mechanism to fuse semantic intent with fine-grained spatial cues. We also introduce GeoSeg-Bench, a diagnostic benchmark of 810 image--query pairs with hierarchical difficulty levels. Experiments show that GeoSeg consistently outperforms all baselines, with extensive ablations confirming the effectiveness and necessity of each component.

Large Language Models (LLMs) often favor Western-associated entities across cultural contexts. Conventional debiasing methods aim for uniform neutrality, but cultural bias mitigation demands context-conditional behavior, preferring culturally appropriate entities when cultural cues are present and remaining neutral when they are absent. We propose CoCoA (Context-Conditional Cultural Alignment), a framework that learns this behavior through dual-context training on the same entity pairs under contexts with and without cultural cues. CoCoA combines a contrastive alignment objective with calibration and drift regularization, optimized through goal-aware gradient reconciliation. We evaluate CoCoA on CAMeL and Camellia, two entity-centric cultural bias benchmarks, across ten language settings and four LLMs. CoCoA reduces the Cultural Bias Score from 43 to 24 on average while maintaining near-neutral preferences at 50.2, with minimal impact on general performance across five standard benchmarks. These findings highlight that effective cultural alignment requires context-conditional modeling rather than uniform debiasing, and establish a new direction for mitigating entity-centric cultural bias in LLMs.

Infrared image super-resolution is currently led by Mamba-based networks with 26 to 37 million parameters, which are difficult to deploy on the airborne and handheld platforms where thermal imaging is most needed. This paper presents TIRMamba, a network with 896K to 910K parameters for single-channel thermal imagery. A Thermal Prior Highway computes gradient, local-contrast and spectral cues once at the input and, through one adapter per residual group, modulates a weight-tied bidirectional state-space trunk and gates its dual-scale detail branch; a tri-path reconstruction adds the learned residual to a bicubic radiometric baseline. Because the standard benchmark provides only 265 infrared training images and evaluates fusion products on full images, we train with a replay strategy: grayscale DIV2K pre-training followed by fine-tuning on 64-pixel patches drawn with equal probability from the infrared and natural corpora. At scale factor 4, TIRMamba matches the strongest protocol-trained methods on both official test sets with 29 to 40 times fewer parameters and 2.8 to 9.4 times lower latency; at scale factor 2 it gives the highest SSIM on both. A variant with prior-conditioned selectivity, TIRMamba-Rad, corrects a 3 dB raw-thermal failure of an intermediate size-invariant design and gives the best results at scale factor 4 on raw-thermal, unmanned-aerial-vehicle and independent-sensor test sets. Code and trained models will be released at https://github.com/julian135707/TIRMamba upon acceptance.

Image-to-Video generation (I2V) animates a static image into a temporally coherent video sequence following textual instructions, yet preserving fine-grained object identity under changing viewpoints remains a persistent challenge. Unlike text-to-video models, existing I2V pipelines often suffer from appearance drift and geometric distortion, artifacts we attribute to the sparsity of single-view 2D observations and weak cross-modal alignment. Here we address this problem from both data and model perspectives. First, we curate ConsIDVid, a large-scale object-centric dataset built with a scalable pipeline for high-quality, temporally aligned videos, and establish ConsIDVid-Bench, where we present a novel benchmarking and evaluation framework for multi-view consistency using metrics sensitive to subtle geometric and appearance deviations. We further propose ConsID-Gen, a view-assisted I2V generation framework that augments the first frame with unposed auxiliary views and fuses semantic and structural cues via a dual-stream visual-geometric encoder as well as a text-visual connector, yielding unified conditioning for a Diffusion Transformer backbone. Experiments across ConsIDVid-Bench demonstrate that ConsID-Gen consistently outperforms in multiple metrics, with the best overall performance surpassing leading video generation models like Wan2.1 and HunyuanVideo, delivering superior identity fidelity and temporal coherence under challenging real-world scenarios. We will release our model and dataset at https://myangwu.github.io/ConsID-Gen.

Recent progress in latent world models (e.g., V-JEPA2) has shown promising capability in forecasting future world states from video observations. Nevertheless, dense prediction from a short observation window limits temporal context and can bias predictors toward local, low-level extrapolation, making it difficult to capture long-horizon semantics and reducing downstream utility. Vision--language models (VLMs), in contrast, provide strong semantic grounding and general knowledge by reasoning over uniformly sampled frames, but they are not ideal as standalone dense predictors due to compute-driven sparse sampling, a language-output bottleneck that compresses fine-grained interaction states into text-oriented representations, and a data-regime mismatch when adapting to small action-conditioned datasets. We propose a VLM-guided JEPA-style latent world modeling framework that combines dense-frame dynamics modeling with long-horizon semantic guidance via a dual-temporal pathway: a dense JEPA branch for fine-grained motion and interaction cues, and a uniformly sampled VLM thinker branch with a larger temporal stride for knowledge-rich guidance. To transfer the VLM's progressive reasoning signals effectively, we introduce a hierarchical pyramid representation extraction module that aggregates multi-layer VLM representations into guidance features compatible with latent prediction. Experiments on hand-manipulation trajectory prediction show that our method outperforms both a strong VLM-only baseline and a JEPA-predictor baseline, and yields more robust long-horizon rollout behavior.

Generative AI has rapidly expanded audio-visual forgery beyond human-centric deepfakes into general scenes. Existing AIGC detection methods assume audio-visual content correspondence, identifying forgeries by spotting cross-modal inconsistencies. However, we empirically find that this assumption does not consistently hold in general scenarios. We argue that, for general audio-visual AIGC detection, decision-level fusion is a more robust alternative to feature-level fusion. Therefore, we propose DAV-Det, a decoupled audio-visual AIGC detection system that independently models forensic evidence from each modality. The visual detector leverages multi-granularity representations at global, patch, and segment levels to capture spatial forgery cues, while the audio detector exploits both temporal and spectral irregularities via a gated temporal-spectral dual-branch architecture to model acoustic artifacts. Our method ranks 1st in the General AIGC Audio-Video Detection Challenge of the IJCAI-ECAI 2026 DDL 2.0 Workshop, with a final score of 0.8460. Code is available at https://github.com/tuffy-studio/DAV-Det.

Multimodal large language models (MLLMs) have advanced from image-level reasoning to pixel-level grounding, but extending these capabilities to videos remains challenging as models must achieve spatial precision and temporally consistent reference tracking. Existing video MLLMs often rely on a static segmentation token ([SEG]) for frame-wise grounding, which provides semantics but lacks temporal context, causing spatial drift, identity switches, and unstable initialization when objects move or reappear. We introduce SPARROW, a pixel-grounded video MLLM that unifies spatial accuracy and temporal stability through two key components: (i) Target-Specific Tracked Features (TSF), which inject temporally aligned referent cues during training, and (ii) a dual-prompt design that decodes box ([BOX]) and segmentation ([SEG]) tokens to fuse geometric priors with semantic grounding. SPARROW is supported by a curated referential video dataset of 30,646 videos and 45,231 Q&A pairs and operates end-to-end without external detectors via a class-agnostic SAM2-based proposer. Integrated into three recent open-source video MLLMs (UniPixel, GLUS, and VideoGLaMM), SPARROW delivers consistent gains across six benchmarks, improving up to +8.9 J&F on RVOS, +5 mIoU on visual grounding, and +5.4 CLAIR on GCG. These results demonstrate that SPARROW substantially improves referential stability, spatial precision, and temporal coherence in pixel-grounded video understanding. Project page: https://risys-lab.github.io/SPARROW