Daily Papers

Robotic ultrasound couples a high-rate contact-force loop with slower, delayed image feedback, so image-guided ultrasound probe rotation can perturb contact force before the resulting image response is observed. We derive a closed-form orientation-rate limit that bounds the modeled rotation-induced estimated-force excursion over a finite horizon while accounting for disturbance rejection by the fast force loop. The limit depends on local contact stiffness, force-loop gains, a conservative rotation-to-force gain bound, the excursion budget, and the prediction horizon. We implement this model in a dual-rate controller with timestamp-based delay reconstruction and joint-torque-based force estimation, and evaluate it on a curved gelatin phantom using paired controller comparisons and component ablations. Relative to unconstrained image guidance, the proposed rate-limited controller reduced first-second root-mean-square (RMS) estimated-force error by 0.40 N while increasing cue-convergence time by 0.94 s. A fixed rate cap near the analytically predicted ceiling produced no resolvable difference in force error and converged 0.32 s faster, indicating that the principal practical value of the model is the rate-design rule rather than online prediction. Delay reconstruction had no resolvable effect at the tested latency. A single-subject popliteal scan demonstrated feasibility, although the image cue was noise-limited on heterogeneous tissue.

Long-horizon multimodal agents in open-world games must stay goal-directed across many low-level interactions under tight token and latency budgets. Existing approaches often trade off costly per-step reasoning against reactive execution that can drift, repeat failures, and recover poorly. Our key idea is to reuse strategic reasoning across locally stable segments and reinvoke it at event boundaries. We present SPIKE, an adaptive dual controller framework for cost-efficient long-horizon game control. Its Strategic Controller performs low-frequency global planning, failure analysis, and recovery, while its Reactive Controller handles fast local execution under a strict token budget. An Event Trigger monitors visual change, task progress, repeated actions, and failure signals to decide when control should stay reactive or escalate to strategic reasoning. Hierarchical Memory separates short-term experience reuse in the State-Action Memory Bank (SA-MB) from structured evidence in the State Action Knowledge Graph (SA-KG), allowing each controller to retrieve the context it needs. This design reuses strategic proposals over multiple reactive steps, supports local override when plans become stale, and reserves expensive reasoning for moments where extra deliberation is useful. On the Lite-100 split of StarDojo, SPIKE improves Lite-100 success rate (SR) by 5.0 percentage points (38.5% relative) over the strongest Lite-100 baseline and Budgeted SR by 9.3 points (75.6% relative) over the strongest budgeted baseline. It also reduces token consumption by 54.9% and latency by 40.8%. Ablations show that event triggering, reactive override, and heterogeneous memory each contribute to success and recovery, supporting selective reasoning rather than reasoning at every step.

Large language models (LLMs) remain susceptible to jailbreak and direct prompt-injection attacks, yet the strongest defensive filters frequently over-refuse benign queries and degrade user experience. Previous work on jailbreak and prompt injection detection such as GradSafe, detects unsafe prompts with a single "accept all" anchor token, but its threshold is brittle and it offers no deterministic guarantee that harmful content will not be emitted once decoding begins. We introduce Gradient-Controlled Decoding (GCD), a training-free guardrail that combines an acceptance anchor token ("Sure") and refusal anchor token ("Sorry") tightening the decision boundary and significantly lowering false positives. In the mitigation stage, if a prompt is flagged, GCD preset-injects one or two refusal tokens ("Sorry, I can't...") before autoregressive decoding resumes, guaranteeing first-token safety regardless of sampling strategy. On ToxicChat, XSTest-v2, and AdvBench, GCD reduces false positives by 52% vs. GradSafe at comparable recall, lowers attack success rate by up to 10% vs. the strongest decoding-only baseline, adds under 15-20 ms latency on an average on V100 instances, transfers to LLaMA-2-7B, Mixtral-8x7B, and Qwen-2-7B, and requires only 20 demonstration templates.

The goal of reinforcement learning (RL) is to find a policy that maximizes the expected cumulative return. It has been shown that this objective can be represented as an optimization problem of state-action visitation distribution under linear constraints. The dual problem of this formulation, which we refer to as dual RL, is unconstrained and easier to optimize. In this work, we first cast several state-of-the-art offline RL and offline imitation learning (IL) algorithms as instances of dual RL approaches with shared structures. Such unification allows us to identify the root cause of the shortcomings of prior methods. For offline IL, our analysis shows that prior methods are based on a restrictive coverage assumption that greatly limits their performance in practice. To fix this limitation, we propose a new discriminator-free method ReCOIL that learns to imitate from arbitrary off-policy data to obtain near-expert performance. For offline RL, our analysis frames a recent offline RL method XQL in the dual framework, and we further propose a new method f-DVL that provides alternative choices to the Gumbel regression loss that fixes the known training instability issue of XQL. The performance improvements by both of our proposed methods, ReCOIL and f-DVL, in IL and RL are validated on an extensive suite of simulated robot locomotion and manipulation tasks. Project code and details can be found at this https://hari-sikchi.github.io/dual-rl.

How can we benefit from large models without sacrificing inference speed, a common dilemma in self-driving systems? A prevalent solution is a dual-system architecture, employing a small model for rapid, reactive decisions and a larger model for slower but more informative analyses. Existing dual-system designs often implement parallel architectures where inference is either directly conducted using the large model at each current frame or retrieved from previously stored inference results. However, these works still struggle to enable large models for a timely response to every online frame. Our key insight is to shift intensive computations of the current frame to previous time steps and perform a batch inference of multiple time steps to make large models respond promptly to each time step. To achieve the shifting, we introduce Efficiency through Thinking Ahead (ETA), an asynchronous system designed to: (1) propagate informative features from the past to the current frame using future predictions from the large model, (2) extract current frame features using a small model for real-time responsiveness, and (3) integrate these dual features via an action mask mechanism that emphasizes action-critical image regions. Evaluated on the Bench2Drive CARLA Leaderboard-v2 benchmark, ETA advances state-of-the-art performance by 8% with a driving score of 69.53 while maintaining a near-real-time inference speed at 50 ms.

Prior research on deep video compression (DVC) for machine tasks typically necessitates training a unique codec for each specific task, mandating a dedicated decoder per task. In contrast, traditional video codecs employ a flexible encoder controller, enabling the adaptation of a single codec to different tasks through mechanisms like mode prediction. Drawing inspiration from this, we introduce an innovative encoder controller for deep video compression for machines. This controller features a mode prediction and a Group of Pictures (GoP) selection module. Our approach centralizes control at the encoding stage, allowing for adaptable encoder adjustments across different tasks, such as detection and tracking, while maintaining compatibility with a standard pre-trained DVC decoder. Empirical evidence demonstrates that our method is applicable across multiple tasks with various existing pre-trained DVCs. Moreover, extensive experiments demonstrate that our method outperforms previous DVC by about 25% bitrate for different tasks, with only one pre-trained decoder.

Standardized lossy video coding is at the core of almost all real-world video processing pipelines. Rate control is used to enable standard codecs to adapt to different network bandwidth conditions or storage constraints. However, standard video codecs (e.g., H.264) and their rate control modules aim to minimize video distortion w.r.t. human quality assessment. We demonstrate empirically that standard-coded videos vastly deteriorate the performance of deep vision models. To overcome the deterioration of vision performance, this paper presents the first end-to-end learnable deep video codec control that considers both bandwidth constraints and downstream deep vision performance, while adhering to existing standardization. We demonstrate that our approach better preserves downstream deep vision performance than traditional standard video coding.

The performance of multi-turn, agentic LLM inference is increasingly dominated by KV-Cache storage I/O rather than computation. In prevalent disaggregated architectures, loading the massive KV-Cache from external storage creates a fundamental imbalance: storage NICs on prefill engines become bandwidth-saturated, while those on decoding engines remain idle. This asymmetry severely constrains overall system throughput. We present DualPath, an inference system that breaks this bottleneck by introducing dual-path KV-Cache loading. Beyond the traditional storage-to-prefill path, DualPath enables a novel storage-to-decode path, in which the KV-Cache is loaded into decoding engines and then efficiently transferred to prefill engines via RDMA over the compute network. DualPath combines this optimized data path -- which inherently avoids network congestion and avoids interference with latency-critical model execution communications -- with a global scheduler that dynamically balances load across prefill and decode engines. Our evaluation on three models with production agentic workloads demonstrates that DualPath improves offline inference throughput by up to 1.87times on our in-house inference system. It can also improve online serving throughput by an average factor of 1.96times without violating SLO.

Activity difference based learning algorithms-such as contrastive Hebbian learning and equilibrium propagation-have been proposed as biologically plausible alternatives to error back-propagation. However, on traditional digital chips these algorithms suffer from having to solve a costly inference problem twice, making these approaches more than two orders of magnitude slower than back-propagation. In the analog realm equilibrium propagation may be promising for fast and energy efficient learning, but states still need to be inferred and stored twice. Inspired by lifted neural networks and compartmental neuron models we propose a simple energy based compartmental neuron model, termed dual propagation, in which each neuron is a dyad with two intrinsic states. At inference time these intrinsic states encode the error/activity duality through their difference and their mean respectively. The advantage of this method is that only a single inference phase is needed and that inference can be solved in layerwise closed-form. Experimentally we show on common computer vision datasets, including Imagenet32x32, that dual propagation performs equivalently to back-propagation both in terms of accuracy and runtime.

This paper presents DualCamCtrl, a novel end-to-end diffusion model for camera-controlled video generation. Recent works have advanced this field by representing camera poses as ray-based conditions, yet they often lack sufficient scene understanding and geometric awareness. DualCamCtrl specifically targets this limitation by introducing a dual-branch framework that mutually generates camera-consistent RGB and depth sequences. To harmonize these two modalities, we further propose the Semantic Guided Mutual Alignment (SIGMA) mechanism, which performs RGB-depth fusion in a semantics-guided and mutually reinforced manner. These designs collectively enable DualCamCtrl to better disentangle appearance and geometry modeling, generating videos that more faithfully adhere to the specified camera trajectories. Additionally, we analyze and reveal the distinct influence of depth and camera poses across denoising stages and further demonstrate that early and late stages play complementary roles in forming global structure and refining local details. Extensive experiments demonstrate that DualCamCtrl achieves more consistent camera-controlled video generation, with over 40\% reduction in camera motion errors compared with prior methods. Our project page: https://soyouthinkyoucantell.github.io/dualcamctrl-page/

We present DuPO, a dual learning-based preference optimization framework that generates annotation-free feedback via a generalized duality. DuPO addresses two key limitations: Reinforcement Learning with Verifiable Rewards (RLVR)'s reliance on costly labels and applicability restricted to verifiable tasks, and traditional dual learning's restriction to strictly dual task pairs (e.g., translation and back-translation). Specifically, DuPO decomposes a primal task's input into known and unknown components, then constructs its dual task to reconstruct the unknown part using the primal output and known information (e.g., reversing math solutions to recover hidden variables), broadening applicability to non-invertible tasks. The quality of this reconstruction serves as a self-supervised reward to optimize the primal task, synergizing with LLMs' ability to instantiate both tasks via a single model. Empirically, DuPO achieves substantial gains across diverse tasks: it enhances the average translation quality by 2.13 COMET over 756 directions, boosts the mathematical reasoning accuracy by an average of 6.4 points on three challenge benchmarks, and enhances performance by 9.3 points as an inference-time reranker (trading computation for accuracy). These results position DuPO as a scalable, general, and annotation-free paradigm for LLM optimization.

The rate-distortion-perception (RDP) trade-off extends classical rate--distortion theory by imposing a distributional constraint on reconstructions, providing a unified framework for neural image compression that jointly governs fidelity and perceptual realism. While prior work achieves near-optimal rate--perception trade-offs, practical frameworks explicitly realizing the full RDP surface remain scarce, primarily due to the difficulty of introducing common randomness at the decoder. We propose DCIC (Dual-Constrained Diffusion Image Compression), which integrates a learned codec with a diffusion-based decoder governed by joint distortion and idempotence constraints. The distortion constraint bounds reconstruction fidelity relative to the base codec output; the idempotence constraint -- requiring that re-encoding the restored image recovers the base codec reconstruction -- serves as a tractable surrogate for the distributional perception requirement. Together, they steer the reverse denoising process via iterative optimization with consistent noise injection, realizing common randomness without additional rate overhead. At fixed rate, dual attenuation factors (K_D, K_P) jointly navigate the Pareto frontier of the distortion-perception plane, enabling continuously adjustable fidelity-realism trade-offs from a single bitstream. DCIC_{RD} (K_P{=}0) and DCIC_{RP} (K_D{=}0) arise as boundary curves, with DCIC_{RDP} (K_D = K_P=1) realizing the optimal interior operating point. Experiments on CelebA-HQ, CLIC2020, and ImageNet-1K across CNN, Transformer, and hybrid architectures confirm that DCIC_{RDP} achieves superior BD-PSNR over all perceptual codecs, while DCIC_{RP} matches dedicated perception-oriented methods in BD-FID, validating the practical value of full RDP surface navigation.

While recent large vision-language models (VLMs) have improved generalization in vision-language navigation (VLN), existing methods typically rely on end-to-end pipelines that map vision-language inputs directly to short-horizon discrete actions. Such designs often produce fragmented motions, incur high latency, and struggle with real-world challenges like dynamic obstacle avoidance. We propose DualVLN, the first dual-system VLN foundation model that synergistically integrates high-level reasoning with low-level action execution. System 2, a VLM-based global planner, "grounds slowly" by predicting mid-term waypoint goals via image-grounded reasoning. System 1, a lightweight, multi-modal conditioning Diffusion Transformer policy, "moves fast" by leveraging both explicit pixel goals and latent features from System 2 to generate smooth and accurate trajectories. The dual-system design enables robust real-time control and adaptive local decision-making in complex, dynamic environments. By decoupling training, the VLM retains its generalization, while System 1 achieves interpretable and effective local navigation. DualVLN outperforms prior methods across all VLN benchmarks and real-world experiments demonstrate robust long-horizon planning and real-time adaptability in dynamic environments.

We consider an improper reinforcement learning setting where a learner is given M base controllers for an unknown Markov decision process, and wishes to combine them optimally to produce a potentially new controller that can outperform each of the base ones. This can be useful in tuning across controllers, learnt possibly in mismatched or simulated environments, to obtain a good controller for a given target environment with relatively few trials. Towards this, we propose two algorithms: (1) a Policy Gradient-based approach; and (2) an algorithm that can switch between a simple Actor-Critic (AC) based scheme and a Natural Actor-Critic (NAC) scheme depending on the available information. Both algorithms operate over a class of improper mixtures of the given controllers. For the first case, we derive convergence rate guarantees assuming access to a gradient oracle. For the AC-based approach we provide convergence rate guarantees to a stationary point in the basic AC case and to a global optimum in the NAC case. Numerical results on (i) the standard control theoretic benchmark of stabilizing an cartpole; and (ii) a constrained queueing task show that our improper policy optimization algorithm can stabilize the system even when the base policies at its disposal are unstable.

Achieving seamless, human-like interaction remains a key challenge for full-duplex spoken dialogue models (SDMs). Reinforcement learning (RL) has substantially enhanced text- and vision-language models, while well-designed reward signals are crucial for the performance of RL. We consider RL a promising strategy to address the key challenge for SDMs. However, a fundamental barrier persists: prevailing automated metrics for assessing interaction quality rely on superficial proxies, such as behavioral statistics or timing-prediction accuracy, failing to provide reliable reward signals for RL. On the other hand, human evaluations, despite their richness, remain costly, inconsistent, and difficult to scale. We tackle this critical barrier by proposing a Dual-Axis Generative Reward Model, which is trained to understand complex interaction dynamics using a detailed taxonomy and an annotated dataset, produces a single score and, crucially, provides separate evaluations for semantic quality and interaction timing. Such dual outputs furnish precise diagnostic feedback for SDMs and deliver a dependable, instructive reward signal suitable for online reinforcement learning. Our model achieves state-of-the-art performance on interaction-quality assessment across a wide spectrum of datasets, spanning synthetic dialogues and complex real-world interactions.

Reinforcement learning with verifiable rewards (RLVR) generates hundreds of thousands of tokens per training step, with rollout generation dominating the computational cost. The overall token budget can be controlled along two main dimensions: (i) deciding which prompts to allocate rollouts to, and (ii) deciding how long each rollout should be. Prior work has generally controlled only one of these dimensions at a time. We show that jointly tuning both decisions under a shared compute budget improves both reasoning quality and wall-clock training time. We instantiate this view as DUal-controlled tokEn allocaTion (DUET), a computationally efficient layer over GRPO that uses a lightweight pre-rollout surrogate of prompt informativeness to set how many rollouts each prompt receives, and a marker-gated abort rule with importance reweighting to set when to stop them. On Qwen3-1.7B trained on MATH, DUET outperforms full-budget GRPO and the other three budget-aware baseline methods. DUET's advantage further generalizes to other benchmarks across math and coding, and is on par with the best baseline on the scientific Q\&A domain, while also achieving a 1.62times wall-clock speedup. More notably, using only 50\% of the token budget, DUET still outperforms all baseline methods at their full budget, achieving an even higher 2.51times speedup over full-budget GRPO. We verify the high performance of DUET on other backbone LLMs, including Qwen3-4B and Llama-3.2-3B-Instruct. Notably, the gap between DUET and the strongest baseline widens as the budget tightens, contrary to the usual pattern in which efficient methods trade off quality as compute decreases. More broadly, these results suggest that DUET budget-aware control strategies are valuable not only for accelerating training, but also for improving the quality of the learning signal.

To enhance the controllability of text-to-image diffusion models, current ControlNet-like models have explored various control signals to dictate image attributes. However, existing methods either handle conditions inefficiently or use a fixed number of conditions, which does not fully address the complexity of multiple conditions and their potential conflicts. This underscores the need for innovative approaches to manage multiple conditions effectively for more reliable and detailed image synthesis. To address this issue, we propose a novel framework, DynamicControl, which supports dynamic combinations of diverse control signals, allowing adaptive selection of different numbers and types of conditions. Our approach begins with a double-cycle controller that generates an initial real score sorting for all input conditions by leveraging pre-trained conditional generation models and discriminative models. This controller evaluates the similarity between extracted conditions and input conditions, as well as the pixel-level similarity with the source image. Then, we integrate a Multimodal Large Language Model (MLLM) to build an efficient condition evaluator. This evaluator optimizes the ordering of conditions based on the double-cycle controller's score ranking. Our method jointly optimizes MLLMs and diffusion models, utilizing MLLMs' reasoning capabilities to facilitate multi-condition text-to-image (T2I) tasks. The final sorted conditions are fed into a parallel multi-control adapter, which learns feature maps from dynamic visual conditions and integrates them to modulate ControlNet, thereby enhancing control over generated images. Through both quantitative and qualitative comparisons, DynamicControl demonstrates its superiority over existing methods in terms of controllability, generation quality and composability under various conditional controls.

End-to-end autonomous driving has emerged as a pivotal direction in the field of autonomous systems. Recent works have demonstrated impressive performance by incorporating high-level guidance signals to steer low-level trajectory planners. However, their potential is often constrained by inaccurate high-level guidance and the computational overhead of complex guidance modules. To address these limitations, we propose Mimir, a novel hierarchical dual-system framework capable of generating robust trajectories relying on goal points with uncertainty estimation: (1) Unlike previous approaches that deterministically model, we estimate goal point uncertainty with a Laplace distribution to enhance robustness; (2) To overcome the slow inference speed of the guidance system, we introduce a multi-rate guidance mechanism that predicts extended goal points in advance. Validated on challenging Navhard and Navtest benchmarks, Mimir surpasses previous state-of-the-art methods with a 20% improvement in the driving score EPDMS, while achieving 1.6 times improvement in high-level module inference speed without compromising accuracy. The code and models will be released soon to promote reproducibility and further development. The code is available at https://github.com/ZebinX/Mimir-Uncertainty-Driving

Ensuring safe, comfortable, and efficient planning is crucial for autonomous driving systems. While end-to-end models trained on large datasets perform well in standard driving scenarios, they struggle with complex low-frequency events. Recent Large Language Models (LLMs) and Vision Language Models (VLMs) advancements offer enhanced reasoning but suffer from computational inefficiency. Inspired by the dual-process cognitive model "Thinking, Fast and Slow", we propose FASIONAD -- a novel dual-system framework that synergizes a fast end-to-end planner with a VLM-based reasoning module. The fast system leverages end-to-end learning to achieve real-time trajectory generation in common scenarios, while the slow system activates through uncertainty estimation to perform contextual analysis and complex scenario resolution. Our architecture introduces three key innovations: (1) A dynamic switching mechanism enabling slow system intervention based on real-time uncertainty assessment; (2) An information bottleneck with high-level plan feedback that optimizes the slow system's guidance capability; (3) A bidirectional knowledge exchange where visual prompts enhance the slow system's reasoning while its feedback refines the fast planner's decision-making. To strengthen VLM reasoning, we develop a question-answering mechanism coupled with reward-instruct training strategy. In open-loop experiments, FASIONAD achieves a 6.7% reduction in average L2 trajectory error and 28.1% lower collision rate.

We propose ComDrive: the first comfort-oriented end-to-end autonomous driving system to generate temporally consistent and comfortable trajectories. Recent studies have demonstrated that imitation learning-based planners and learning-based trajectory scorers can effectively generate and select safety trajectories that closely mimic expert demonstrations. However, such trajectory planners and scorers face the challenge of generating temporally inconsistent and uncomfortable trajectories. To address these issues, ComDrive first extracts 3D spatial representations through sparse perception, which then serves as conditional inputs. These inputs are used by a Conditional Denoising Diffusion Probabilistic Model (DDPM)-based motion planner to generate temporally consistent multi-modal trajectories. A dual-stream adaptive trajectory scorer subsequently selects the most comfortable trajectory from these candidates to control the vehicle. Experiments demonstrate that ComDrive achieves state-of-the-art performance in both comfort and safety, outperforming UniAD by 17% in driving comfort and reducing collision rates by 25% compared to SparseDrive. More results are available on our project page: https://jmwang0117.github.io/ComDrive/.

Constrained Markov Decision Processes (CMDPs) are critical in many high-stakes applications, where decisions must optimize cumulative rewards while strictly adhering to complex nonlinear constraints. In domains such as power systems, finance, supply chains, and precision robotics, violating these constraints can result in significant financial or societal costs. Existing Reinforcement Learning (RL) methods often struggle with sample efficiency and effectiveness in finding feasible policies for highly and strictly constrained CMDPs, limiting their applicability in these environments. Stochastic dual dynamic programming is often used in practice on convex relaxations of the original problem, but they also encounter computational challenges and loss of optimality. This paper introduces a novel approach, Two-Stage Deep Decision Rules (TS-DDR), to efficiently train parametric actor policies using Lagrangian Duality. TS-DDR is a self-supervised learning algorithm that trains general decision rules (parametric policies) using stochastic gradient descent (SGD); its forward passes solve {\em deterministic} optimization problems to find feasible policies, and its backward passes leverage duality theory to train the parametric policy with closed-form gradients. TS-DDR inherits the flexibility and computational performance of deep learning methodologies to solve CMDP problems. Applied to the Long-Term Hydrothermal Dispatch (LTHD) problem using actual power system data from Bolivia, TS-DDR is shown to enhance solution quality and to reduce computation times by several orders of magnitude when compared to current state-of-the-art methods.

On-policy (self) distillation (OPSD) is increasingly adopted for language-model post-training. It strengthens the teacher with privileged information but can induce a privilege illusion: the student learns privilege-dependent behavior it cannot reproduce from its inference-time context, yet behaves as if the training-time privileged information remained available, ultimately degrading performance. In this paper, we identify information asymmetry between the privileged teacher and the student at inference as the root cause of this failure in OPSD. To resolve this asymmetry, we propose Dual-Anchored Policy Distillation (DAPD), a unified framework with two levels of anchoring. Dual-Path Anchoring (DPA) introduces a self-conditioned bridge and aligns reference and rollout behavior along two matched-information paths, preventing privilege-dependent behavior from being transferred to the inference-time student. Dual-Source Anchoring (DSA) applies these paths in both reference-to-rollout and rollout-to-reference directions, reducing reliance on privileged reference guidance while preserving correctness supervision. Extensive experiments show that DAPD significantly alleviates privilege illusion, outperforming OPSD on Qwen3-4B by +2.00 points on average across tasks. Notably, its gains persist across scales, reaching +2.69 at 4B and +2.78 at 32B.

On-policy self-distillation (OPSD) combines student generated trajectories with dense supervision from a privileged teacher of the same model. Its pointwise clipping protects the student from locally incompatible teacher directions, but the fixed teacher receives no feedback about the supervision the student rejects, which limits effective learning from the teacher. We introduce DualOPSD, which alternates updates in a coupled teacher-student system. The student retains OPSD's clipped forward KL objective. The privileged teacher adapts to the updated student after each student step. A residual target based on the frozen initial model preserves the effect of privileged context during teacher adaptation. Across Qwen3-8B/4B/1.7B and three math benchmarks, DualOPSD improves avg@12 accuracy over OPSD by 9.83 percentage points. Further diagnostic analyses show lower bidirectional KL, less persistent mismatch, and retained sensitivity to privileged reference. Together, these results demonstrate that DualOPSD can be a more effective form of privileged self-distillation. Code is available at: https://github.com/on1262/DualOPSD.

Continual learning aims to enable a single model to learn a sequence of tasks without catastrophic forgetting. Top-performing methods usually require a rehearsal buffer to store past pristine examples for experience replay, which, however, limits their practical value due to privacy and memory constraints. In this work, we present a simple yet effective framework, DualPrompt, which learns a tiny set of parameters, called prompts, to properly instruct a pre-trained model to learn tasks arriving sequentially without buffering past examples. DualPrompt presents a novel approach to attach complementary prompts to the pre-trained backbone, and then formulates the objective as learning task-invariant and task-specific "instructions". With extensive experimental validation, DualPrompt consistently sets state-of-the-art performance under the challenging class-incremental setting. In particular, DualPrompt outperforms recent advanced continual learning methods with relatively large buffer sizes. We also introduce a more challenging benchmark, Split ImageNet-R, to help generalize rehearsal-free continual learning research. Source code is available at https://github.com/google-research/l2p.

The growing safety concerns surrounding large language models raise an urgent need to align them with diverse human preferences to simultaneously enhance their helpfulness and safety. A promising approach is to enforce safety constraints through Reinforcement Learning from Human Feedback (RLHF). For such constrained RLHF, typical Lagrangian-based primal-dual policy optimization methods are computationally expensive and often unstable. This paper presents a perspective of dualization that reduces constrained alignment to an equivalent unconstrained alignment problem. We do so by pre-optimizing a smooth and convex dual function that has a closed form. This shortcut eliminates the need for cumbersome primal-dual policy iterations, greatly reducing the computational burden and improving training stability. Our strategy leads to two practical algorithms in model-based and preference-based settings (MoCAN and PeCAN, respectively). A broad range of experiments demonstrate the effectiveness and merits of our algorithms.

This study explores the interference in temporal processing within a dual-task paradigm from an artificial intelligence (AI) perspective. In this context, the dual-task setup is implemented as a simplified version of the Overcooked environment with two variations, single task (T) and dual task (T+N). Both variations involve an embedded time production task, but the dual task (T+N) additionally involves a concurrent number comparison task. Two deep reinforcement learning (DRL) agents were separately trained for each of these tasks. These agents exhibited emergent behavior consistent with human timing research. Specifically, the dual task (T+N) agent exhibited significant overproduction of time relative to its single task (T) counterpart. This result was consistent across four target durations. Preliminary analysis of neural dynamics in the agents' LSTM layers did not reveal any clear evidence of a dedicated or intrinsic timer. Hence, further investigation is needed to better understand the underlying time-keeping mechanisms of the agents and to provide insights into the observed behavioral patterns. This study is a small step towards exploring parallels between emergent DRL behavior and behavior observed in biological systems in order to facilitate a better understanding of both.

Speech-to-speech models handle turn-taking naturally but offer limited support for tool-calling or complex reasoning, while production ASR-LLM-TTS voice pipelines offer these capabilities but rely on silence timeouts, which lead to unnatural turn-taking. We present DualTurn, which narrows this gap through generative pretraining on dual-channel conversational audio. The model generates both speakers' future audio autoregressively, implicitly learning conversational dynamics without any labels, and is then fine-tuned to predict interpretable turn-taking signals that map directly to agent actions. DualTurn monitors both channels continuously, anticipating turn boundaries and producing five agent actions. On standard benchmarks, DualTurn (0.5B) outperforms both VAP on agent action prediction (wF1 0.633 vs. 0.389) and a 3.1B audio-text model on word-level turn prediction (AUC 0.930 vs. 0.880), while anticipating turn boundaries earlier with fewer interruptions.

Existing text-to-video (T2V) models often struggle with generating videos with sufficiently pronounced or complex actions. A key limitation lies in the text prompt's inability to precisely convey intricate motion details. To address this, we propose a novel framework, MVideo, designed to produce long-duration videos with precise, fluid actions. MVideo overcomes the limitations of text prompts by incorporating mask sequences as an additional motion condition input, providing a clearer, more accurate representation of intended actions. Leveraging foundational vision models such as GroundingDINO and SAM2, MVideo automatically generates mask sequences, enhancing both efficiency and robustness. Our results demonstrate that, after training, MVideo effectively aligns text prompts with motion conditions to produce videos that simultaneously meet both criteria. This dual control mechanism allows for more dynamic video generation by enabling alterations to either the text prompt or motion condition independently, or both in tandem. Furthermore, MVideo supports motion condition editing and composition, facilitating the generation of videos with more complex actions. MVideo thus advances T2V motion generation, setting a strong benchmark for improved action depiction in current video diffusion models. Our project page is available at https://mvideo-v1.github.io/.

This paper presents JAEGER, a dual-level whole-body controller for humanoid robots that addresses the challenges of training a more robust and versatile policy. Unlike traditional single-controller approaches, JAEGER separates the control of the upper and lower bodies into two independent controllers, so that they can better focus on their distinct tasks. This separation alleviates the dimensionality curse and improves fault tolerance. JAEGER supports both root velocity tracking (coarse-grained control) and local joint angle tracking (fine-grained control), enabling versatile and stable movements. To train the controller, we utilize a human motion dataset (AMASS), retargeting human poses to humanoid poses through an efficient retargeting network, and employ a curriculum learning approach. This method performs supervised learning for initialization, followed by reinforcement learning for further exploration. We conduct our experiments on two humanoid platforms and demonstrate the superiority of our approach against state-of-the-art methods in both simulation and real environments.

Non-Intrusive Load Monitoring (NILM) offers a cost-effective method to obtain fine-grained appliance-level energy consumption in smart homes and building applications. However, the increasing adoption of behind-the-meter (BTM) energy sources such as solar panels and battery storage poses new challenges for conventional NILM methods that rely solely on at-the-meter data. The energy injected from the BTM sources can obscure the power signatures of individual appliances, leading to a significant decrease in NILM performance. To address this challenge, we present DualNILM, a deep multi-task learning framework designed for the dual tasks of appliance state recognition and injected energy identification. Using a Transformer-based architecture that integrates sequence-to-point and sequence-to-sequence strategies, DualNILM effectively captures multiscale temporal dependencies in the aggregate power consumption patterns, allowing for accurate appliance state recognition and energy injection identification. Extensive evaluation on self-collected and synthesized datasets demonstrates that DualNILM maintains an excellent performance for dual tasks in NILM, much outperforming conventional methods. Our work underscores the framework's potential for robust energy disaggregation in modern energy systems with renewable penetration. Synthetic photovoltaic augmented datasets with realistic injection simulation methodology are open-sourced at https://github.com/MathAdventurer/PV-Augmented-NILM-Datasets.

Recent advances in large language models (LLMs) have greatly improved their reasoning and decision-making abilities when deployed as agents. Richer reasoning, however, often comes at the cost of longer chain of thought (CoT), hampering interaction efficiency in real-world scenarios. Nevertheless, there still lacks systematic definition of LLM agent efficiency, hindering targeted improvements. To this end, we introduce dual-efficiency, comprising (i) step-level efficiency, which minimizes tokens per step, and (ii) trajectory-level efficiency, which minimizes the number of steps to complete a task. Building on this definition, we propose DEPO, a dual-efficiency preference optimization method that jointly rewards succinct responses and fewer action steps. Experiments on WebShop and BabyAI show that DEPO cuts token usage by up to 60.9% and steps by up to 26.9%, while achieving up to a 29.3% improvement in performance. DEPO also generalizes to three out-of-domain math benchmarks and retains its efficiency gains when trained on only 25% of the data. Our project page is at https://opencausalab.github.io/DEPO.

We propose DualOptim+, a novel optimization framework for improving machine unlearning in large language models. It introduces a base state to capture common representations shared by forgetting and retaining objectives and delta states to preserve objective-specific residuals. This architecture allows the optimizer to adaptively bridge shared and decoupled states based on the directional conflict between forgetting and retaining gradients. We further introduce DualOptim+ 8bit, a quantized variant that reduces memory overhead without compromising performance. Extensive experiments across fictitious and real-world unlearning, safety alignment, and multi-task learning tasks demonstrate that DualOptim+ consistently achieves a superior trade-off between different objectives. Codes are available at https://github.com/CityU-MLO/DualOptimPlus.

Crafting a single, versatile physics-based controller that can breathe life into interactive characters across a wide spectrum of scenarios represents an exciting frontier in character animation. An ideal controller should support diverse control modalities, such as sparse target keyframes, text instructions, and scene information. While previous works have proposed physically simulated, scene-aware control models, these systems have predominantly focused on developing controllers that each specializes in a narrow set of tasks and control modalities. This work presents MaskedMimic, a novel approach that formulates physics-based character control as a general motion inpainting problem. Our key insight is to train a single unified model to synthesize motions from partial (masked) motion descriptions, such as masked keyframes, objects, text descriptions, or any combination thereof. This is achieved by leveraging motion tracking data and designing a scalable training method that can effectively utilize diverse motion descriptions to produce coherent animations. Through this process, our approach learns a physics-based controller that provides an intuitive control interface without requiring tedious reward engineering for all behaviors of interest. The resulting controller supports a wide range of control modalities and enables seamless transitions between disparate tasks. By unifying character control through motion inpainting, MaskedMimic creates versatile virtual characters. These characters can dynamically adapt to complex scenes and compose diverse motions on demand, enabling more interactive and immersive experiences.

Accurate and high-fidelity driving scene reconstruction demands the effective utilization of comprehensive scene information as conditional inputs. Existing methods predominantly rely on 3D bounding boxes and BEV road maps for foreground and background control, which fail to capture the full complexity of driving scenes and adequately integrate multimodal information. In this work, we present DualDiff, a dual-branch conditional diffusion model designed to enhance driving scene generation across multiple views and video sequences. Specifically, we introduce Occupancy Ray-shape Sampling (ORS) as a conditional input, offering rich foreground and background semantics alongside 3D spatial geometry to precisely control the generation of both elements. To improve the synthesis of fine-grained foreground objects, particularly complex and distant ones, we propose a Foreground-Aware Mask (FGM) denoising loss function. Additionally, we develop the Semantic Fusion Attention (SFA) mechanism to dynamically prioritize relevant information and suppress noise, enabling more effective multimodal fusion. Finally, to ensure high-quality image-to-video generation, we introduce the Reward-Guided Diffusion (RGD) framework, which maintains global consistency and semantic coherence in generated videos. Extensive experiments demonstrate that DualDiff achieves state-of-the-art (SOTA) performance across multiple datasets. On the NuScenes dataset, DualDiff reduces the FID score by 4.09% compared to the best baseline. In downstream tasks, such as BEV segmentation, our method improves vehicle mIoU by 4.50% and road mIoU by 1.70%, while in BEV 3D object detection, the foreground mAP increases by 1.46%. Code will be made available at https://github.com/yangzhaojason/DualDiff.

Optimization analyses for cross-entropy training rely on local Taylor models of the loss to predict whether a proposed step will decrease the objective. These surrogates are reliable only inside the Taylor convergence radius of the true loss along the update direction. That radius is set not by real-line curvature alone but by the nearest complex singularity. For cross-entropy, the softmax partition function F=sum_j exp(z_j) has complex zeros -- ``ghosts of softmax'' -- that induce logarithmic singularities in the loss and cap this radius. To make this geometry usable, we derive closed-form expressions under logit linearization along the proposed update direction. In the binary case, the exact radius is ρ^*=δ^2+ π^2/Δ_a. In the multiclass case, we obtain the lower bound ρ_a=π/Δ_a, where Δ_a=max_k a_k-min_k a_k is the spread of directional logit derivatives a_k=nabla z_kcdot v. This bound costs one Jacobian-vector product and reveals what makes a step fragile: samples that are both near a decision flip and highly sensitive to the proposed direction tighten the radius. The normalized step size r=τ/ρ_a separates safe from dangerous updates. Across six tested architectures and multiple step directions, no model fails for r<1, yet collapse appears once rge 1. Temperature scaling confirms the mechanism: normalizing by ρ_a shrinks the onset-threshold spread from standard deviation 0.992 to 0.164. A controller that enforces τleρ_a survives learning-rate spikes up to 10{,} 000times in our tests, where gradient clipping still collapses. Together, these results identify a geometric constraint on cross-entropy optimization that operates through Taylor convergence rather than Hessian curvature.

Bimanual robot systems substantially expand manipulation capabilities, but coordinating two arms introduces additional control complexity and failure modes that are not well captured by existing benchmarks. We introduce DuoBench, an extensible benchmarking framework for bimanual manipulation policies on the FR3 Duo platform. DuoBench comprises eleven tasks spanning four coordination categories, implemented in simulation and partially reproduced in the real world through reproducible task recipes with 3D-printable assets. In addition, we propose a stage-based evaluation scheme that supports fine-grained semantic failure analysis beyond binary success and provide human-teleoperated datasets for all benchmark tasks. We benchmark several dual-arm imitation-learning and vision-language-action policies in simulation and on real hardware. Our results show that current policies remain challenged by bimanual manipulation, particularly in early interaction stages, parallel arm execution, and transfer between simulation and real-world settings. DuoBench provides a reproducible testbed for diagnosing these failure modes and studying future methods for dual-arm policy learning. Code, datasets, and videos are available at https://duobench.github.io/

Inverse reinforcement learning (IRL) is typically formulated as maximizing entropy subject to matching the distribution of expert trajectories. Classical (dual-ascent) IRL guarantees monotonic performance improvement but requires fully solving an RL problem each iteration to compute dual gradients. More recent adversarial methods avoid this cost at the expense of stability and monotonic dual improvement, by directly optimizing the primal problem and using a discriminator to provide rewards. In this work, we bridge the gap between these approaches by enabling monotonic improvement of the reward function and policy without having to fully solve an RL problem at every iteration. Our key theoretical insight is that a trust-region-optimal policy for a reward function update can be globally optimal for a smaller update in the same direction. This smaller update allows us to explicitly optimize the dual objective while only relying on a local search around the current policy. In doing so, our approach avoids the training instabilities of adversarial methods, offers monotonic performance improvement, and learns a reward function in the traditional sense of IRL--one that can be globally optimized to match expert demonstrations. Our proposed algorithm, Trust Region Inverse Reinforcement Learning (TRIRL), outperforms state-of-the-art imitation learning methods across multiple challenging tasks by a factor of 2.4x in terms of aggregate inter-quartile mean, while recovering reward functions that generalize to system dynamics shifts.

Recently, learning-based controllers have been shown to push mobile robotic systems to their limits and provide the robustness needed for many real-world applications. However, only classical optimization-based control frameworks offer the inherent flexibility to be dynamically adjusted during execution by, for example, setting target speeds or actuator limits. We present a framework to overcome this shortcoming of neural controllers by conditioning them on an auxiliary input. This advance is enabled by including a feature-wise linear modulation layer (FiLM). We use model-free reinforcement-learning to train quadrotor control policies for the task of navigating through a sequence of waypoints in minimum time. By conditioning the policy on the maximum available thrust or the viewing direction relative to the next waypoint, a user can regulate the aggressiveness of the quadrotor's flight during deployment. We demonstrate in simulation and in real-world experiments that a single control policy can achieve close to time-optimal flight performance across the entire performance envelope of the robot, reaching up to 60 km/h and 4.5g in acceleration. The ability to guide a learned controller during task execution has implications beyond agile quadrotor flight, as conditioning the control policy on human intent helps safely bringing learning based systems out of the well-defined laboratory environment into the wild.

Rate control algorithms are at the heart of video conferencing platforms, determining target bitrates that match dynamic network characteristics for high quality. Recent data-driven strategies have shown promise for this challenging task, but the performance degradation they introduce during training has been a nonstarter for many production services, precluding adoption. This paper aims to bolster the practicality of data-driven rate control by presenting an alternative avenue for experiential learning: leveraging purely existing telemetry logs produced by the incumbent algorithm in production. We observe that these logs contain effective decisions, although often at the wrong times or in the wrong order. To realize this approach despite the inherent uncertainty that log-based learning brings (i.e., lack of feedback for new decisions), our system, Mowgli, combines a variety of robust learning techniques (i.e., conservatively reasoning about alternate behavior to minimize risk and using a richer model formulation to account for environmental noise). Across diverse networks (emulated and real-world), Mowgli outperforms the widely deployed GCC algorithm, increasing average video bitrates by 15-39% while reducing freeze rates by 60-100%.

Multi-objective reinforcement learning for humanoid robots must coordinate locomotion and manipulation within a single policy. A natural design choice is whether to use a single (unified) critic that estimates the combined value of all objectives, or separate (dual) critics with disjoint reward signals. We present a controlled comparison on the Unitree G1 humanoid (23 active DoF) in NVIDIA Isaac Lab, training loco-manipulation policies through a sequential curriculum spanning 13 levels from stationary reaching to walking with variable-orientation targets. In standardized evaluation, dual-critic policies reach targets 3.5times faster (6.5 vs. 22.6 simulation steps), achieve 2times higher throughput (14.3 vs. 7.0 validated reaches per 1,000 steps), and attain higher validated reach rates (65.2% vs. 53.8%) compared to the unified-critic policy. Notably, additional anti-gaming reward mechanisms provide no further improvement beyond the architectural change alone (60.9% vs. 65.2%). These results have direct implications for the emerging paradigm of RL fine-tuning of imitation-learned policies: when refining a pre-trained manipulation policy with RL, a unified critic risks suppressing the learned behavior through competing locomotion gradients. These findings demonstrate that critic architecture is a primary - and often overlooked - design choice in multi-objective humanoid RL, with greater impact than reward engineering on reaching efficiency.

Vision-Language-Action (VLA) models are receiving increasing attention for their ability to enable robots to perform complex tasks by integrating visual context with linguistic commands. However, achieving efficient real-time performance remains challenging due to the high computational demands of existing models. To overcome this, we propose Dual Process VLA (DP-VLA), a hierarchical framework inspired by dual-process theory. DP-VLA utilizes a Large System 2 Model (L-Sys2) for complex reasoning and decision-making, while a Small System 1 Model (S-Sys1) handles real-time motor control and sensory processing. By leveraging Vision-Language Models (VLMs), the L-Sys2 operates at low frequencies, reducing computational overhead, while the S-Sys1 ensures fast and accurate task execution. Experimental results on the RoboCasa dataset demonstrate that DP-VLA achieves faster inference and higher task success rates, providing a scalable solution for advanced robotic applications.

We introduce DualMind, a generalist agent designed to tackle various decision-making tasks that addresses challenges posed by current methods, such as overfitting behaviors and dependence on task-specific fine-tuning. DualMind uses a novel "Dual-phase" training strategy that emulates how humans learn to act in the world. The model first learns fundamental common knowledge through a self-supervised objective tailored for control tasks and then learns how to make decisions based on different contexts through imitating behaviors conditioned on given prompts. DualMind can handle tasks across domains, scenes, and embodiments using just a single set of model weights and can execute zero-shot prompting without requiring task-specific fine-tuning. We evaluate DualMind on MetaWorld and Habitat through extensive experiments and demonstrate its superior generalizability compared to previous techniques, outperforming other generalist agents by over 50% and 70% on Habitat and MetaWorld, respectively. On the 45 tasks in MetaWorld, DualMind achieves over 30 tasks at a 90% success rate.

Diffusion probabilistic models (DPMs) have achieved impressive success in visual generation. While, they suffer from slow inference speed due to iterative sampling. Employing fewer sampling steps is an intuitive solution, but this will also introduces discretization error. Existing fast samplers make inspiring efforts to reduce discretization error through the adoption of high-order solvers, potentially reaching a plateau in terms of optimization. This raises the question: can the sampling process be accelerated further? In this paper, we re-examine the nature of sampling errors, discerning that they comprise two distinct elements: the widely recognized discretization error and the less explored approximation error. Our research elucidates the dynamics between these errors and the step by implementing a dual-error disentanglement strategy. Building on these foundations, we introduce an unified and training-free acceleration framework, DualFast, designed to enhance the speed of DPM sampling by concurrently accounting for both error types, thereby minimizing the total sampling error. DualFast is seamlessly compatible with existing samplers and significantly boost their sampling quality and speed, particularly in extremely few sampling steps. We substantiate the effectiveness of our framework through comprehensive experiments, spanning both unconditional and conditional sampling domains, across both pixel-space and latent-space DPMs.

In LLM serving, reusing the KV cache of prompts across requests is critical for reducing TTFT and serving costs. Cache-affinity scheduling, which co-locates requests with the same prompt prefix to maximize KV cache reuse, often conflicts with load-balancing scheduling that distributes requests evenly across compute instances. Existing schedulers fail to reconcile this trade-off as they operate within a single mapping space, typically applying cache-affinity routing to a subset of requests and load-balanced routing to the rest, without a unified solution to achieve both goals. To address this limitation, we propose DualMap, a dual-mapping scheduling strategy for distributed LLM serving that achieves both cache affinity and load balancing. Its key idea is to map each request to two candidate instances via two independent hash functions based on the request prompt, then intelligently select the better candidate based on current system states. This design increases the likelihood that requests with shared prefixes are co-located, while evenly dispersing distinct prefixes across the cluster via ``the power of two choices''. To make DualMap robust under dynamic and skewed real-world workloads, we incorporate three techniques: 1) SLO-aware request routing, which prioritizes cache affinity but switches to load-aware scheduling when TTFT exceeds the SLO, enhancing load balance without sacrificing cache reuse; 2) hotspot-aware rebalancing, which dynamically migrates requests from overloaded to underloaded instances, mitigating hotspots and rebalancing the system; 3) lightweight dual-hash-ring scaling, which leverages a dual-hash-ring mapping to support fast and low-overhead instance scaling without costly global remapping. Experiments on real-world workloads show that DualMap improves effective request capacity by up to 2.25times under the same TTFT SLO constraints compared with SOTA work.

While recent text-to-speech (TTS) systems increasingly integrate nonverbal vocalizations (NVs), their evaluations lack standardized metrics and reliable ground-truth references. To bridge this gap, we propose NV-Bench, the first benchmark grounded in a functional taxonomy that treats NVs as communicative acts rather than acoustic artifacts. NV-Bench comprises 1,651 multi-lingual, in-the-wild utterances with paired human reference audio, balanced across 14 NV categories. We introduce a dual-dimensional evaluation protocol: (1) Instruction Alignment, utilizing the proposed paralinguistic character error rate (PCER) to assess controllability, (2) Acoustic Fidelity, measuring the distributional gap to real recordings to assess acoustic realism. We evaluate diverse TTS models and develop two baselines. Experimental results demonstrate a strong correlation between our objective metrics and human perception, establishing NV-Bench as a standardized evaluation framework.

Recent advancements in controllable text-to-image (T2I) diffusion models, such as Ctrl-X and FreeControl, have demonstrated robust spatial and appearance control without requiring auxiliary module training. However, these models often struggle to accurately preserve spatial structures and fail to capture fine-grained conditions related to object poses and scene layouts. To address these challenges, we propose a training-free Dual Recursive Feedback (DRF) system that properly reflects control conditions in controllable T2I models. The proposed DRF consists of appearance feedback and generation feedback that recursively refines the intermediate latents to better reflect the given appearance information and the user's intent. This dual-update mechanism guides latent representations toward reliable manifolds, effectively integrating structural and appearance attributes. Our approach enables fine-grained generation even between class-invariant structure-appearance fusion, such as transferring human motion onto a tiger's form. Extensive experiments demonstrate the efficacy of our method in producing high-quality, semantically coherent, and structurally consistent image generations. Our source code is available at https://github.com/jwonkm/DRF.

Stochastic dual dynamic programming (SDDP) is a state-of-the-art method for solving multi-stage stochastic optimization, widely used for modeling real-world process optimization tasks. Unfortunately, SDDP has a worst-case complexity that scales exponentially in the number of decision variables, which severely limits applicability to only low dimensional problems. To overcome this limitation, we extend SDDP by introducing a trainable neural model that learns to map problem instances to a piece-wise linear value function within intrinsic low-dimension space, which is architected specifically to interact with a base SDDP solver, so that can accelerate optimization performance on new instances. The proposed Neural Stochastic Dual Dynamic Programming (nu-SDDP) continually self-improves by solving successive problems. An empirical investigation demonstrates that nu-SDDP can significantly reduce problem solving cost without sacrificing solution quality over competitors such as SDDP and reinforcement learning algorithms, across a range of synthetic and real-world process optimization problems.

Over the past three decades, numerous controllers have been developed to regulate complex chemical processes, but they have certain limitations. Traditional PI/PID controllers often require customized tuning for various set-point scenarios. On the other hand, MPC frameworks involve resource-intensive steps, and the utilization of black-box machine learning (ML) models can lead to issues such as local minima and infeasibility. Thus, there is a need for an alternative controller paradigm that combines the simplicity of a PI controller with the grade-to-grade (G2G) transferability of an MPC approach. To this end, we developed a novel LSTM controller (LSTMc) as a model-free data-driven controller framework. The LSTMc considers an augmented input tensor that incorporates information on state evolution and error dynamics for the current and previous W time steps, to predict the manipulated input at the next step (u_{t+1}). To demonstrate LSTMc, batch crystallization of dextrose was taken as a representative case study. The desired output for set-point tracking was the mean crystal size (L), with the manipulated input being the jacket temperature (T_j). Extensive training data, encompassing 7000+ different operating conditions, was compiled to ensure comprehensive training of LSTMc across a wide state space region. For comparison, we also designed a PI controller and an LSTM-MPC for different set-point tracking cases. The results consistently showed that LSTMc achieved the lowest set-point deviation (<2\%), three times lower than the MPC. Remarkably, LSTMc maintained this superior performance across all set points, even when sensor measurements contained noise levels of 10\% to 15\%. In summary, by effectively leveraging process data and utilizing sequential ML models, LSTMc offers a superior controller design approach.

Robot manipulation alternates between low-risk transit phases that call for fast execution and high-risk contact stages that demand slow, precise motion. Yet existing Vision-Language-Action models (VLAs) only inherit a single fixed speed from training demonstrations. Prior efforts to accelerate VLAs through model compression, KV-cache reuse, or reinforcement learning only shift the policy from one fixed speed to another, and leave deceleration almost unexplored. We observe that the magnitude of each predicted action already governs how fast the robot moves, opening a direct route to controllable execution speed. We turn this observation into TempoVLA, a single VLA whose execution speed is controlled by an explicit condition. TempoVLA combines two coupled components. (1) A data-side Variable-Speed Trajectory Augmentation (VSTA) that re-times demonstration to any target speed by merging or splitting actions while preserving its motion semantics. (2) A model-side conditioning mechanism that feeds the speed to the policy. Statistics show that VSTA reaches the requested speed with negligible motion error. Experiments in simulation and on real-world tasks demonstrate that TempoVLA achieves flexible speed control in both directions, while VSTA additionally boosts the default 1times performance via better data utilization. Furthermore, by cooperating with a large multimodal model, TempoVLA realizes dynamic speed control, accelerating through low-risk phases and decelerating for high-risk ones.

In-hand object reorientation is necessary for performing many dexterous manipulation tasks, such as tool use in less structured environments that remain beyond the reach of current robots. Prior works built reorientation systems assuming one or many of the following: reorienting only specific objects with simple shapes, limited range of reorientation, slow or quasistatic manipulation, simulation-only results, the need for specialized and costly sensor suites, and other constraints which make the system infeasible for real-world deployment. We present a general object reorientation controller that does not make these assumptions. It uses readings from a single commodity depth camera to dynamically reorient complex and new object shapes by any rotation in real-time, with the median reorientation time being close to seven seconds. The controller is trained using reinforcement learning in simulation and evaluated in the real world on new object shapes not used for training, including the most challenging scenario of reorienting objects held in the air by a downward-facing hand that must counteract gravity during reorientation. Our hardware platform only uses open-source components that cost less than five thousand dollars. Although we demonstrate the ability to overcome assumptions in prior work, there is ample scope for improving absolute performance. For instance, the challenging duck-shaped object not used for training was dropped in 56 percent of the trials. When it was not dropped, our controller reoriented the object within 0.4 radians (23 degrees) 75 percent of the time. Videos are available at: https://taochenshh.github.io/projects/visual-dexterity.

Robust perception and dynamics modeling are fundamental to real-world robotic policy learning. Recent methods employ video diffusion models (VDMs) to enhance robotic policies, improving their understanding and modeling of the physical world. However, existing approaches overlook the coherent and physically consistent motion representations inherently encoded across frames in VDMs. To this end, we propose Video2Act, a framework that efficiently guides robotic action learning by explicitly integrating spatial and motion-aware representations. Building on the inherent representations of VDMs, we extract foreground boundaries and inter-frame motion variations while filtering out background noise and task-irrelevant biases. These refined representations are then used as additional conditioning inputs to a diffusion transformer (DiT) action head, enabling it to reason about what to manipulate and how to move. To mitigate inference inefficiency, we propose an asynchronous dual-system design, where the VDM functions as the slow System 2 and the DiT head as the fast System 1, working collaboratively to generate adaptive actions. By providing motion-aware conditions to System 1, Video2Act maintains stable manipulation even with low-frequency updates from the VDM. For evaluation, Video2Act surpasses previous state-of-the-art VLA methods by 7.7% in simulation and 21.7% in real-world tasks in terms of average success rate, further exhibiting strong generalization capabilities.

Developing embodied agents capable of performing complex interactive tasks in real-world scenarios remains a fundamental challenge in embodied AI. Although recent advances in simulation platforms have greatly enhanced task diversity to train embodied Vision Language Models (VLMs), most platforms rely on simplified robot morphologies and bypass the stochastic nature of low-level execution, which limits their transferability to real-world robots. To address these issues, we present a physics-based simulation platform DualTHOR for complex dual-arm humanoid robots, built upon an extended version of AI2-THOR. Our simulator includes real-world robot assets, a task suite for dual-arm collaboration, and inverse kinematics solvers for humanoid robots. We also introduce a contingency mechanism that incorporates potential failures through physics-based low-level execution, bridging the gap to real-world scenarios. Our simulator enables a more comprehensive evaluation of the robustness and generalization of VLMs in household environments. Extensive evaluations reveal that current VLMs struggle with dual-arm coordination and exhibit limited robustness in realistic environments with contingencies, highlighting the importance of using our simulator to develop more capable VLMs for embodied tasks. The code is available at https://github.com/ds199895/DualTHOR.git.

Diffusion-based large language models (dLLMs), despite their promising performance, still suffer from inferior inference efficiency. This is because dLLMs rely on bidirectional attention and cannot directly benefit from the standard key-value (KV) cache as autoregressive models (ARMs) do. To tackle this issue, we introduce Dual aDaptive Cache (d^2Cache), which is a training-free approximate KV cache framework for accelerating dLLM inference. d^2Cache features a two-stage fine-grained selection strategy to identify tokens and adaptively update their KV states at each decoding step, while caching the KV states of the remaining tokens for reuse. Furthermore, d^2Cache naturally offers a more reliable decoding alternative, which can enable quasi left-to-right generation and mitigate premature overconfidence in tokens at the end of the sequence. Extensive experimental results on two representative dLLMs (\ie, LLaDA and Dream) demonstrate that d^2Cache not only achieves substantial inference speedups, but also yields consistent improvements in generation quality. The code is available at https://github.com/Kamichanw/d2Cache.

In this work, we introduce dual goal representations for goal-conditioned reinforcement learning (GCRL). A dual goal representation characterizes a state by "the set of temporal distances from all other states"; in other words, it encodes a state through its relations to every other state, measured by temporal distance. This representation provides several appealing theoretical properties. First, it depends only on the intrinsic dynamics of the environment and is invariant to the original state representation. Second, it contains provably sufficient information to recover an optimal goal-reaching policy, while being able to filter out exogenous noise. Based on this concept, we develop a practical goal representation learning method that can be combined with any existing GCRL algorithm. Through diverse experiments on the OGBench task suite, we empirically show that dual goal representations consistently improve offline goal-reaching performance across 20 state- and pixel-based tasks.

Most Vision-Language-Action (VLA) systems integrate a Vision-Language Model (VLM) for semantic reasoning with an action expert generating continuous action signals, yet both typically run at a single unified frequency. As a result, policy performance is constrained by the low inference speed of large VLMs. This mandatory synchronous execution severely limits control stability and real-time performance in whole-body robotic manipulation, which involves more joints, larger motion spaces, and dynamically changing views. We introduce a truly asynchronous Fast-Slow VLA framework (DuoCore-FS), organizing the system into a fast pathway for high-frequency action generation and a slow pathway for rich VLM reasoning. The system is characterized by two key features. First, a latent representation buffer bridges the slow and fast systems. It stores instruction semantics and action-reasoning representation aligned with the scene-instruction context, providing high-level guidance to the fast pathway. Second, a whole-body action tokenizer provides a compact, unified representation of whole-body actions. Importantly, the VLM and action expert are still jointly trained end-to-end, preserving unified policy learning while enabling asynchronous execution. DuoCore-FS supports a 3B-parameter VLM while achieving 30 Hz whole-body action-chunk generation, approximately three times as fast as prior VLA models with comparable model sizes. Real-world whole-body manipulation experiments demonstrate improved task success rates and significantly enhanced responsiveness compared to synchronous Fast-Slow VLA baselines. The implementation of DuoCore-FS, including training, inference, and deployment, is provided to commercial users by Astribot as part of the Astribot robotic platform.

Existing benchmarks for conversational AI agents simulate single-control environments, where only the AI agent can use tools to interact with the world, while the user remains a passive information provider. This differs from real-world scenarios like technical support, where users need to actively participate in modifying the state of the (shared) world. In order to address this gap, we introduce tau^2-bench, with four key contributions: 1) A novel Telecom dual-control domain modeled as a Dec-POMDP, where both agent and user make use of tools to act in a shared, dynamic environment that tests both agent coordination and communication, 2) A compositional task generator that programmatically creates diverse, verifiable tasks from atomic components, ensuring domain coverage and controlled complexity, 3) A reliable user simulator tightly coupled with the environment, whose behavior is constrained by tools and observable states, improving simulation fidelity, 4) Fine-grained analysis of agent performance through multiple ablations including separating errors arising from reasoning vs communication/coordination. In particular, our experiments show significant performance drops when agents shift from no-user to dual-control, highlighting the challenges of guiding users. Overall, tau^2-bench provides a controlled testbed for agents that must both reason effectively and guide user actions.

Primal-dual safe RL methods commonly perform iterations between the primal update of the policy and the dual update of the Lagrange Multiplier. Such a training paradigm is highly susceptible to the error in cumulative cost estimation since this estimation serves as the key bond connecting the primal and dual update processes. We show that this problem causes significant underestimation of cost when using off-policy methods, leading to the failure to satisfy the safety constraint. To address this issue, we propose conservative policy optimization, which learns a policy in a constraint-satisfying area by considering the uncertainty in cost estimation. This improves constraint satisfaction but also potentially hinders reward maximization. We then introduce local policy convexification to help eliminate such suboptimality by gradually reducing the estimation uncertainty. We provide theoretical interpretations of the joint coupling effect of these two ingredients and further verify them by extensive experiments. Results on benchmark tasks show that our method not only achieves an asymptotic performance comparable to state-of-the-art on-policy methods while using much fewer samples, but also significantly reduces constraint violation during training. Our code is available at https://github.com/ZifanWu/CAL.

In this paper, we provide a general framework for studying multi-agent online learning problems in the presence of delays and asynchronicities. Specifically, we propose and analyze a class of adaptive dual averaging schemes in which agents only need to accumulate gradient feedback received from the whole system, without requiring any between-agent coordination. In the single-agent case, the adaptivity of the proposed method allows us to extend a range of existing results to problems with potentially unbounded delays between playing an action and receiving the corresponding feedback. In the multi-agent case, the situation is significantly more complicated because agents may not have access to a global clock to use as a reference point; to overcome this, we focus on the information that is available for producing each prediction rather than the actual delay associated with each feedback. This allows us to derive adaptive learning strategies with optimal regret bounds, even in a fully decentralized, asynchronous environment. Finally, we also analyze an "optimistic" variant of the proposed algorithm which is capable of exploiting the predictability of problems with a slower variation and leads to improved regret bounds.

Object detection in poor-illumination environments is a challenging task as objects are usually not clearly visible in RGB images. As infrared images provide additional clear edge information that complements RGB images, fusing RGB and infrared images has potential to enhance the detection ability in poor-illumination environments. However, existing works involving both visible and infrared images only focus on image fusion, instead of object detection. Moreover, they directly fuse the two kinds of image modalities, which ignores the mutual interference between them. To fuse the two modalities to maximize the advantages of cross-modality, we design a dual-enhancement-based cross-modality object detection network DEYOLO, in which semantic-spatial cross modality and novel bi-directional decoupled focus modules are designed to achieve the detection-centered mutual enhancement of RGB-infrared (RGB-IR). Specifically, a dual semantic enhancing channel weight assignment module (DECA) and a dual spatial enhancing pixel weight assignment module (DEPA) are firstly proposed to aggregate cross-modality information in the feature space to improve the feature representation ability, such that feature fusion can aim at the object detection task. Meanwhile, a dual-enhancement mechanism, including enhancements for two-modality fusion and single modality, is designed in both DECAand DEPAto reduce interference between the two kinds of image modalities. Then, a novel bi-directional decoupled focus is developed to enlarge the receptive field of the backbone network in different directions, which improves the representation quality of DEYOLO. Extensive experiments on M3FD and LLVIP show that our approach outperforms SOTA object detection algorithms by a clear margin. Our code is available at https://github.com/chips96/DEYOLO.

Interactive video world models need to generate each video chunk efficiently while responding faithfully to user controls. Many systems use chunk-wise autoregressive generation with few-step denoising, but each chunk still requires several costly denoising iterations. Training-free caching can reduce this cost, yet existing policies make reuse decisions primarily from model-internal denoising dynamics and do not explicitly account for control transitions. Actually, interactive generation explicitly exposes a signal they do not use: the controls for a chunk arrive before it is denoised, so a schedule derived from them costs no forward pass. To this end, we analyze adjacent chunks under different control regimes and find that structural similarity drops around action changes, while low-frequency structure remains more persistent than high-frequency detail. Motivated by these observations, we propose CtrlCache, a training-free control-aware caching framework that adapts computation to the current control sequence. Specifically, the action-aware scheduling and refresh policy detects action changes across and within chunks, and labels each chunk as initial, transition, turning, or steady state. At one selected interior denoising step, initial and transition chunks retain full computation, while turning and steady chunks reuse the transformer residual from the most recent fully computed step in the same chunk. To exploit the persistence of low-frequency structure during steady interaction, we further introduce a frequency-mixed history prior guidance that incorporates complementary information from the preceding clean latent without an additional DiT forward pass. Evaluated on Matrix-Game 2.0 and LingBot-World v1/v2, CtrlCache achieves 1.21x to 1.41x DiT-backbone speedups without model retraining while improving WBench Overall scores over original inference across all three models.

Accurate and high-fidelity driving scene reconstruction relies on fully leveraging scene information as conditioning. However, existing approaches, which primarily use 3D bounding boxes and binary maps for foreground and background control, fall short in capturing the complexity of the scene and integrating multi-modal information. In this paper, we propose DualDiff, a dual-branch conditional diffusion model designed to enhance multi-view driving scene generation. We introduce Occupancy Ray Sampling (ORS), a semantic-rich 3D representation, alongside numerical driving scene representation, for comprehensive foreground and background control. To improve cross-modal information integration, we propose a Semantic Fusion Attention (SFA) mechanism that aligns and fuses features across modalities. Furthermore, we design a foreground-aware masked (FGM) loss to enhance the generation of tiny objects. DualDiff achieves state-of-the-art performance in FID score, as well as consistently better results in downstream BEV segmentation and 3D object detection tasks.

In this paper, a novel machine learning derived control performance assessment (CPA) classification system is proposed. It is dedicated for a wide class of PID-based control industrial loops with processes exhibiting dynamical properties close to second order plus delay time (SOPDT). The proposed concept is very general and easy to configure to distinguish between acceptable and poor closed loop performance. This approach allows for determining the best (but also robust and practically achievable) closed loop performance based on very popular and intuitive closed loop quality factors. Training set can be automatically derived off-line using a number of different, diverse control performance indices (CPIs) used as discriminative features of the assessed control system. The proposed extended set of CPIs is discussed with comprehensive performance assessment of different machine learning based classification methods and practical application of the suggested solution. As a result, a general-purpose CPA system is derived that can be immediately applied in practice without any preliminary or additional learning stage during normal closed loop operation. It is verified by practical application to assess the control system for a laboratory heat exchange and distribution setup.

Achieving both realism and controllability in interactive closed-loop traffic simulation remains a key challenge in autonomous driving. Data-driven simulation methods reproduce realistic trajectories but suffer from covariate shift in closed-loop deployment, compounded by simplified dynamics models that further reduce reliability. Conversely, physics-based simulation methods enhance reliable and controllable closed-loop interactions but often lack expert demonstrations, compromising realism. To address these challenges, we introduce a dual-stage AV-centered simulation framework that conducts open-loop imitation learning pre-training in a data-driven simulator to capture trajectory-level realism and multimodality, followed by closed-loop reinforcement learning fine-tuning in a physics-based simulator to enhance controllability and mitigate covariate shift. In the fine-tuning stage, we propose RIFT, a simple yet effective closed-loop RL fine-tuning strategy that preserves the trajectory-level multimodality through a GRPO-style group-relative advantage formulation, while enhancing controllability and training stability by replacing KL regularization with the dual-clip mechanism. Extensive experiments demonstrate that RIFT significantly improves the realism and controllability of generated traffic scenarios, providing a robust platform for evaluating autonomous vehicle performance in diverse and interactive scenarios.

To build a generalizable Vision-Language-Action (VLA) model with strong reasoning ability, a common strategy is to first train a specialist VLA on robot demonstrations to acquire reliable manipulation skills, and then incorporate mixed annotated robot data together with multimodal data to restore broader reasoning capabilities. However, we observe that the resulting reasoning VLA often suffers from degraded action performance compared to the specialist model before fine-tuning, a phenomenon we refer to as action degeneration. To address this issue, we propose DualVLA, which enhances action performance through carefully designed post-training while still preserving reasoning capability. We first introduce a dual-layer data pruning method that removes redundant embodied reasoning, preventing it from adversely influencing action learning. To further strengthen action generation, we design a dual-teacher adaptive distillation strategy that assigns different supervision signals to different data domains while maintaining reasoning ability. To fill the evaluation gap for generalist VLAs, we also propose VLA Score, which decouples VLA capability into reasoning, intention, action, and alignment dimensions for a more fine-grained assessment. Experiments show that DualVLA achieves an average success rate of 61.0 in SimplerEnv and an average score of 65.4 across eight competitive multimodal benchmarks, demonstrating a stronger balance between precise action execution and multimodal understanding. Project Website: https://costaliya.github.io/DualVLA/.

In policy gradient reinforcement learning, access to a differentiable model enables 1st-order gradient estimation that accelerates learning compared to relying solely on derivative-free 0th-order estimators. However, discontinuous dynamics cause bias and undermine the effectiveness of 1st-order estimators. Prior work addressed this bias by constructing a confidence interval around the REINFORCE 0th-order gradient estimator and using these bounds to detect discontinuities. However, the REINFORCE estimator is notoriously noisy, and we find that this method requires task-specific hyperparameter tuning and has low sample efficiency. This paper asks whether such bias is the primary obstacle and what minimal fixes suffice. First, we re-examine standard discontinuous settings from prior work and introduce DDCG, a lightweight test that switches estimators in nonsmooth regions; with a single hyperparameter, DDCG achieves robust performance and remains reliable with small samples. Second, on differentiable robotics control tasks, we present IVW-H, a per-step inverse-variance implementation that stabilizes variance without explicit discontinuity detection and yields strong results. Together, these findings indicate that while estimator switching improves robustness in controlled studies, careful variance control often dominates in practical deployments.

We consider dynamic stair climbing with the HRP-4 humanoid robot as part of an Airbus manufacturing use-case demonstrator. We share experimental knowledge gathered so as to achieve this task, which HRP-4 had never been challenged to before. In particular, we extend walkingstabilization based on linear inverted pendulum tracking by quadratic programming-based wrench distribution and a whole-body admittance controller that applies both end-effector and CoM strategies. While existing stabilizers tend to use either one or the other, our experience suggests that the combination of these two approaches improves tracking performance. We demonstrate this solution in an on-site experiment where HRP-4 climbs an industrial staircase with 18.5 cm high steps, and release our walking controller as open source software.

Recent advances in Diffusion Transformers (DiTs) have enabled high-quality joint audio-video generation, producing videos with synchronized audio within a single model. However, existing controllable generation frameworks are typically restricted to video-only control. This restricts comprehensive controllability and often leads to suboptimal cross-modal alignment. To bridge this gap, we present MMControl, which enables users to perform Multi-Modal Control in joint audio-video generation. MMControl introduces a dual-stream conditional injection mechanism. It incorporates both visual and acoustic control signals, including reference images, reference audio, depth maps, and pose sequences, into a joint generation process. These conditions are injected through bypass branches into a joint audio-video Diffusion Transformer, enabling the model to simultaneously generate identity-consistent video and timbre-consistent audio under structural constraints. Furthermore, we introduce modality-specific guidance scaling, which allows users to independently and dynamically adjust the influence strength of each visual and acoustic condition at inference time. Extensive experiments demonstrate that MMControl achieves fine-grained, composable control over character identity, voice timbre, body pose, and scene layout in joint audio-video generation.

High dynamic range (HDR) imaging involves capturing a series of frames of the same scene, each with different exposure settings, to broaden the dynamic range of light. This can be achieved through burst capturing or using staggered HDR sensors that capture long and short exposures simultaneously in the camera image signal processor (ISP). Within camera ISP pipeline, illuminant estimation is a crucial step aiming to estimate the color of the global illuminant in the scene. This estimation is used in camera ISP white-balance module to remove undesirable color cast in the final image. Despite the multiple frames captured in the HDR pipeline, conventional illuminant estimation methods often rely only on a single frame of the scene. In this paper, we explore leveraging information from frames captured with different exposure times. Specifically, we introduce a simple feature extracted from dual-exposure images to guide illuminant estimators, referred to as the dual-exposure feature (DEF). To validate the efficiency of DEF, we employed two illuminant estimators using the proposed DEF: 1) a multilayer perceptron network (MLP), referred to as exposure-based MLP (EMLP), and 2) a modified version of the convolutional color constancy (CCC) to integrate our DEF, that we call ECCC. Both EMLP and ECCC achieve promising results, in some cases surpassing prior methods that require hundreds of thousands or millions of parameters, with only a few hundred parameters for EMLP and a few thousand parameters for ECCC.

We present a physics-based humanoid controller that achieves high-fidelity motion imitation and fault-tolerant behavior in the presence of noisy input (e.g. pose estimates from video or generated from language) and unexpected falls. Our controller scales up to learning ten thousand motion clips without using any external stabilizing forces and learns to naturally recover from fail-state. Given reference motion, our controller can perpetually control simulated avatars without requiring resets. At its core, we propose the progressive multiplicative control policy (PMCP), which dynamically allocates new network capacity to learn harder and harder motion sequences. PMCP allows efficient scaling for learning from large-scale motion databases and adding new tasks, such as fail-state recovery, without catastrophic forgetting. We demonstrate the effectiveness of our controller by using it to imitate noisy poses from video-based pose estimators and language-based motion generators in a live and real-time multi-person avatar use case.

Large language model-based deep research agents have been increasingly popular for addressing long-horizon information-seeking tasks, but they often incur high end-to-end latency due to extensive reasoning and frequent tool use. Speculation frameworks aim to reduce latency by overlapping action execution with reasoning; however, existing approaches typically rely on uniform speculation strategies and strict action matching, which limits inference speedups and robustness. In this work, we revisit the speculate-verify paradigm for deep research agents through the lens of action heterogeneity. We show that Search and Visit actions exhibit fundamentally different reasoning and model capacity requirements: entropy-based analysis reveals that Search decisions have higher uncertainty and benefit significantly from explicit reasoning, whereas Visit decisions have lower entropy and depend primarily on model capacity. Motivated by this dual-process characteristic, we propose DualSpec, a heterogeneous speculation framework equipped with a lightweight, confidence-based semantic verifier. Experiments across multiple models and benchmarks demonstrate that DualSpec achieves up to 3.28times end-to-end speedup while maintaining accuracy comparable to fully reasoning agents.

Training tool-use agents typically relies on outcome-based filtering: Supervised Fine-Tuning (SFT) on successful trajectories and Reinforcement Learning (RL) on pass-rate-selected tasks. However, this paradigm ignores interaction dynamics: successful trajectories may lack error recovery or exhibit redundancy, while pass rates fail to distinguish structurally informative tasks from trivial ones. We propose TopoCurate, an interaction-aware framework that projects multi-trial rollouts from the same task into a unified semantic quotient topology. By merging equivalent action-observation states, this projection transforms scattered linear trajectories into a structured manifold that explicitly captures how tool invocations and environmental responses drive the divergence between effective strategies and failure modes. Leveraging this representation, we introduce a dual-selection mechanism: for SFT, we prioritize trajectories demonstrating reflective recovery, semantic efficiency, and strategic diversity to mitigate covariate shift and mode collapse; for RL, we select tasks with high error branch ratios and strategic heterogeneity, maximizing gradient Signal-to-Noise Ratio to address vanishing signals in sparse-reward settings. Evaluations on BFCLv3 and Tau2 Bench show that TopoCurate achieves consistent gains of 4.2\% (SFT) and 6.9\% (RL) over state-of-the-art baselines. We will release the code and data soon for further investigations.

We present SpaceTimePilot, a video diffusion model that disentangles space and time for controllable generative rendering. Given a monocular video, SpaceTimePilot can independently alter the camera viewpoint and the motion sequence within the generative process, re-rendering the scene for continuous and arbitrary exploration across space and time. To achieve this, we introduce an effective animation time-embedding mechanism in the diffusion process, allowing explicit control of the output video's motion sequence with respect to that of the source video. As no datasets provide paired videos of the same dynamic scene with continuous temporal variations, we propose a simple yet effective temporal-warping training scheme that repurposes existing multi-view datasets to mimic temporal differences. This strategy effectively supervises the model to learn temporal control and achieve robust space-time disentanglement. To further enhance the precision of dual control, we introduce two additional components: an improved camera-conditioning mechanism that allows altering the camera from the first frame, and CamxTime, the first synthetic space-and-time full-coverage rendering dataset that provides fully free space-time video trajectories within a scene. Joint training on the temporal-warping scheme and the CamxTime dataset yields more precise temporal control. We evaluate SpaceTimePilot on both real-world and synthetic data, demonstrating clear space-time disentanglement and strong results compared to prior work. Project page: https://zheninghuang.github.io/Space-Time-Pilot/ Code: https://github.com/ZheningHuang/spacetimepilot

Camera control has been extensively studied in conditioned video generation; however, performing precisely altering the camera trajectories while faithfully preserving the video content remains a challenging task. The mainstream approach to achieving precise camera control is warping a 3D representation according to the target trajectory. However, such methods fail to fully leverage the 3D priors of video diffusion models (VDMs) and often fall into the Inpainting Trap, resulting in subject inconsistency and degraded generation quality. To address this problem, we propose DepthDirector, a video re-rendering framework with precise camera controllability. By leveraging the depth video from explicit 3D representation as camera-control guidance, our method can faithfully reproduce the dynamic scene of an input video under novel camera trajectories. Specifically, we design a View-Content Dual-Stream Condition mechanism that injects both the source video and the warped depth sequence rendered under the target viewpoint into the pretrained video generation model. This geometric guidance signal enables VDMs to comprehend camera movements and leverage their 3D understanding capabilities, thereby facilitating precise camera control and consistent content generation. Next, we introduce a lightweight LoRA-based video diffusion adapter to train our framework, fully preserving the knowledge priors of VDMs. Additionally, we construct a large-scale multi-camera synchronized dataset named MultiCam-WarpData using Unreal Engine 5, containing 8K videos across 1K dynamic scenes. Extensive experiments show that DepthDirector outperforms existing methods in both camera controllability and visual quality. Our code and dataset will be publicly available.

Full-duplex dialog models are designed to listen and speak simultaneously with rapid responses to fast-changing user input. Among existing approaches, native full-duplex models merges different channels (e.g. listen and speak) in a single time step, overcoming the high response latency inherent to time-division multiplexing time-division multiplexing (TDM) alternatives. Yet, a key challenge remains: aligning textual monologues with audio streams that operate at different bitrates. The prevailing solution relies on word-level alignment, but this can degrade the language ability of large pre-trained models. Moreover, it requires highly accurate timestamps for every token, which introduces cascading errors and increases pre-processing costs. In this paper, we propose textual monologues in continuous tokens sequence, namely "natural" monologues, which mimics humanoid cognitive behavior in dialogs. For temporal alignment, we alternate the position of the natural monologue - leading or trailing the audio - across different training stages. This "dual" training paradigm proves highly effective in building FLM-Audio, our 7B spoken dialog model that demonstrates superior responsiveness, duplexity, and chatting experiences, as confirmed by experimental results.

Classifier-Free Guidance (CFG) has emerged as a central approach for enhancing semantic alignment in flow-based diffusion models. In this paper, we explore a unified framework called CFG-Ctrl, which reinterprets CFG as a control applied to the first-order continuous-time generative flow, using the conditional-unconditional discrepancy as an error signal to adjust the velocity field. From this perspective, we summarize vanilla CFG as a proportional controller (P-control) with fixed gain, and typical follow-up variants develop extended control-law designs derived from it. However, existing methods mainly rely on linear control, inherently leading to instability, overshooting, and degraded semantic fidelity especially on large guidance scales. To address this, we introduce Sliding Mode Control CFG (SMC-CFG), which enforces the generative flow toward a rapidly convergent sliding manifold. Specifically, we define an exponential sliding mode surface over the semantic prediction error and introduce a switching control term to establish nonlinear feedback-guided correction. Moreover, we provide a Lyapunov stability analysis to theoretically support finite-time convergence. Experiments across text-to-image generation models including Stable Diffusion 3.5, Flux, and Qwen-Image demonstrate that SMC-CFG outperforms standard CFG in semantic alignment and enhances robustness across a wide range of guidance scales. Project Page: https://hanyang-21.github.io/CFG-Ctrl

LLM search agents increasingly rely on tools at inference time, but their trajectories are often constrained by hard limits on both tool calls and generated tokens. Under such dual budgets, better answers require not only stronger models, but also explicit control over which search action should receive the next budget unit and when the accumulated evidence is sufficient to commit a final answer. We study this problem in multi-hop question answering (QA) and formulate it as two-stage inference-time budget control. At search time, our controller assigns each feasible action a task-level Value-of-Information (VOI) score, defined as an operational estimate of marginal task value per unit budget under the current search state and remaining dual budget, and uses this score to choose among retrieval, decomposition, and answer commitment. After search, a selective evidence-grounded finalizer compares the trajectory answer with a refined candidate and rewrites only when the residual error appears to be a low-risk answer-form error. Across four multi-hop QA benchmarks, three LLM backbones, and four budget levels, the method yields positive aggregate gains over four audited baselines under the same hard dual-budget protocol. Ablations show that search-time budget control, especially budget-dependent penalty, provides the main performance gain, while answer-time control helps mainly when the retrieval path is already adequate. These results suggest that inference-time budget control for LLM search agents should govern both how budget is spent during search and how the final answer is committed.

Model-based reinforcement learning is a widely accepted solution for solving excessive sample demands. However, the predictions of the dynamics models are often not accurate enough, and the resulting bias may incur catastrophic decisions due to insufficient robustness. Therefore, it is highly desired to investigate how to improve the robustness of model-based RL algorithms while maintaining high sampling efficiency. In this paper, we propose Model-Based Double-dropout Planning (MBDP) to balance robustness and efficiency. MBDP consists of two kinds of dropout mechanisms, where the rollout-dropout aims to improve the robustness with a small cost of sample efficiency, while the model-dropout is designed to compensate for the lost efficiency at a slight expense of robustness. By combining them in a complementary way, MBDP provides a flexible control mechanism to meet different demands of robustness and efficiency by tuning two corresponding dropout ratios. The effectiveness of MBDP is demonstrated both theoretically and experimentally.

Critic-free methods like GRPO reduce memory demands by estimating advantages from multiple rollouts but tend to converge slowly, as critical learning signals are diluted by an abundance of uninformative samples and tokens. To tackle this challenge, we propose the Dynamic Dual-Level Down-Sampling (D^3S) framework that prioritizes the most informative samples and tokens across groups to improve the efficient of policy optimization. D^3S operates along two levels: (1) the sample-level, which selects a subset of rollouts to maximize advantage variance (Var(A)). We theoretically proven that this selection is positively correlated with the upper bound of the policy gradient norms, yielding higher policy gradients. (2) the token-level, which prioritizes tokens with a high product of advantage magnitude and policy entropy (|A_{i,t}|times H_{i,t}), focusing updates on tokens where the policy is both uncertain and impactful. Moreover, to prevent overfitting to high-signal data, D^3S employs a dynamic down-sampling schedule inspired by curriculum learning. This schedule starts with aggressive down-sampling to accelerate early learning and gradually relaxes to promote robust generalization. Extensive experiments on Qwen2.5 and Llama3.1 demonstrate that integrating D^3S into advanced RL algorithms achieves state-of-the-art performance and generalization while requiring fewer samples and tokens across diverse reasoning benchmarks. Our code is added in the supplementary materials and will be made publicly available.

Large Language Models (LLMs) have achieved remarkable progress through Reinforcement Learning with Verifiable Rewards (RLVR), yet still rely heavily on external supervision (e.g., curated labels). Adversarial learning, particularly through self-play, offers a promising alternative that enables models to iteratively learn from themselves - thus reducing reliance on external supervision. Dual-play extends adversarial learning by assigning specialized roles to two models and training them against each other, fostering sustained competition and mutual evolution. Despite its promise, adapting dual-play training to LLMs remains limited, largely due to their susceptibility to reward hacking and training instability. In this paper, we introduce PasoDoble, a novel LLM dual-play framework. PasoDoble adversarially trains two models initialized from the same base model: a Proposer, which generates challenging questions with ground-truth answers, and a Solver, which attempts to solve them. We enrich the Proposer with knowledge from a pre-training dataset to ensure the questions' quality and diversity. To avoid reward hacking, the Proposer is rewarded for producing only valid questions that push the Solver's limit, while the Solver is rewarded for solving them correctly, and both are updated jointly. To further enhance training stability, we introduce an optional offline paradigm that decouples Proposer and Solver updates, alternately updating each for several steps while holding the other fixed. Notably, PasoDoble operates without supervision during training. Experimental results show that PasoDoble can improve the reasoning performance of LLMs. Our project page is available at https://hcy123902.github.io/PasoDoble.

Dual-process agents pair a fast policy with a slow deliberative model. In real-time settings the slow model usually runs continuously; in turn-based agents and robot planners it is invoked on events such as uncertainty or a detected failure. We study a fast learned actor that takes every decision and hands control to a reasoning vision-language model only when a gate opens, while the game keeps running. We use closed-loop Doom and the new open "System One" typed-decision models, served through a common llama.cpp interface. On 900 held-out questions, (i) zero-shot decision models from 0.15B to 9B parameters choose to collect items 1.6-1.8 times more often than chance among their errors, in any option order, although the order changes some models' accuracy; (ii) accuracy, calibration and sensitivity (how well confidence separates right from wrong answers) are distinct: models of similar accuracy differ widely in AUROC, and the confidence of the most sensitive one tracks which kinds of situation it fails, not which answers are wrong; (iii) offline, deferring the least confident 30% of decisions to a reasoning model gains over random deferral in proportion to the actor's AUROC (rank correlation 0.87); with actor and rate chosen on held-out games the gain is +0.13 [0.08, 0.18] with doomLaya's option order and +0.08 [0.02, 0.14] with shuffled options, and reasoning carries about half of it; (iv) in closed loop (33 games, three seeds) no variant reaches the exit. Committing to plans, the reasoner's or a fixed explore rule's, opens more doors and makes an actor that stands still play; with the rule the agent dies more often. Told that some doors need keys, the reasoner takes ordinary doors for locked ones, which the state cannot tell apart; without that knowledge it goes back to collecting. We release code, prompts, data and logs.

This paper presents the Adaptive Personalized Control System (APECS) architecture, a novel framework for human-in-the-loop control. An architecture is developed which defines appropriate constraints for the system objectives. A method for enacting Lipschitz and sector bounds on the resulting controller is derived to ensure desirable control properties. An analysis of worst-case loss functions and the optimal loss function weighting is made to implement an effective training scheme. Finally, simulations are carried out to demonstrate the effectiveness of the proposed architecture. This architecture resulted in a 4.5% performance increase compared to the human operator and 9% to an unconstrained feedforward neural network trained in the same way.

Connected and automated vehicles demand lateral controllers that are simultaneously accurate, low-effort, and safe under model error and sensor noise. Modular controllers such as model predictive control (MPC) are interpretable and constraint-aware but rely on accurate models and hand-tuned weights. End-to-end learned policies, in particular continuous-action deep reinforcement learning, are adaptable and require no hand-designed control law, but offer no intrinsic safety guarantees and limited interpretability. This paper presents a hybrid architecture that combines an end-to-end Soft Actor-Critic (SAC) policy with a constrained linear MPC into a single steering command, using the MPC's first-step optimum as the model-based anchor and a single monotone blending coefficient that interpolates between the two paradigms. The architecture is evaluated on a linearized lateral bicycle model against a PID baseline, a tuned linear MPC, and a stand-alone SAC policy, across nominal, single-axis robustness, and multi-initial-condition ensemble experiments. The hybrid retains the tracking quality of stand-alone SAC while remaining inside the MPC's actuator envelope and preserving a deterministic, model-based contribution to every steering command. The architecture provides an actuator-envelope guarantee by construction but does not establish recursive feasibility or terminal invariance, and the closed-form blend does not prevent all corner-case divergences at the boundary of the training distribution. A corner-case analysis shows that the blend attenuates but cannot prevent failure under distribution shift, motivating a connectivity-aware extension in which the blending coefficient is scheduled by vehicle-to-everything (V2X) signals to restore model-based authority. Limitations and a path toward a constrained-QP predictive safety filter are discussed.

Reinforcement learning can align visual generators with reward signals beyond their pretraining objectives, but existing score-function methods typically introduce stochasticity by perturbing the reverse denoising trajectory, leading to costly rollout-based optimization. We instead ask whether stochastic exploration can be introduced inside the generator while preserving its original sampler. Routing Policy Optimization (RPO) answers this question by turning attention routing into a stochastic exploration action. At a few selected denoising levels, each query block keeps its own block and samples further key blocks in proportion to the generator's native attention mass, or keeps dense attention. The sampled route perturbs the velocity of that transition, and a Gaussian likelihood around the dense velocity scores the perturbation with a score-function objective. RPO further uses a controlled two-rollout estimator: two rollouts share the same prompt, initial latent, routed denoising levels, and dense anchor layers, differing only in their sampled attention routes. Their reward difference provides an advantage signal for the routed transitions. Because the likelihood differentiates the dense velocity itself, the learned updates remain effective after routing is removed. At inference, RPO restores dense attention and retains the original deterministic sampler. Experiments on text-to-image and text-to-video generation show that RPO improves generation quality while achieving nearly 4x higher training efficiency than Flow-GRPO-style methods. Please see our project page at https://velox-world.com/rpo for visual results.

Model quantization is widely applied for compressing and accelerating deep neural networks (DNNs). However, conventional Quantization-Aware Training (QAT) focuses on training DNNs with uniform bit-width. The bit-width settings vary across different hardware and transmission demands, which induces considerable training and storage costs. Hence, the scheme of one-shot joint training multiple precisions is proposed to address this issue. Previous works either store a larger FP32 model to switch between different precision models for higher accuracy or store a smaller INT8 model but compromise accuracy due to using shared quantization parameters. In this paper, we introduce the Double Rounding quantization method, which fully utilizes the quantized representation range to accomplish nearly lossless bit-switching while reducing storage by using the highest integer precision instead of full precision. Furthermore, we observe a competitive interference among different precisions during one-shot joint training, primarily due to inconsistent gradients of quantization scales during backward propagation. To tackle this problem, we propose an Adaptive Learning Rate Scaling (ALRS) technique that dynamically adapts learning rates for various precisions to optimize the training process. Additionally, we extend our Double Rounding to one-shot mixed precision training and develop a Hessian-Aware Stochastic Bit-switching (HASB) strategy. Experimental results on the ImageNet-1K classification demonstrate that our methods have enough advantages to state-of-the-art one-shot joint QAT in both multi-precision and mixed-precision. We also validate the feasibility of our method on detection and segmentation tasks, as well as on LLMs task. Our codes are available at https://github.com/haiduo/Double-Rounding.

Vision-Language-Action (VLA) models can follow instructions and manipulate objects, but their performance often collapses out of distribution (OOD), when the scene, viewpoint, or object differs from training. Adapting to each new situation typically requires collecting more data and fine-tuning. We present StellaVLA, a framework that instead adapts at test time by conditioning on a single retrieved demonstration. The key idea is to move beyond imitating what an expert did and instead convey why: an automated offline pipeline converts each raw trajectory into a structured demonstration, e.g., a task plan, sub-goal descriptions, and verbalized 3D motion, at zero human-annotation cost. Provided as in-context guidance, this structured demonstration lets the policy reason about the task rather than mimic a pixel trajectory, which also makes it transferable across embodiments (real-robot, human-hand, or XR demonstrations). A parallel dual-training design internalizes this reasoning during training through a joint action-and-language objective, while inference uses the action expert alone, preserving real-time, high-frequency control with no added latency. On the VLA-Arena leaderboard(Aug 1, 2026), StellaVLA ranks first with an overall score of 0.63, versus 0.44 and 0.22 for the strong prior models (π_{0.5} and LingBot-VLA), and it further leads on LIBERO with 98.8% average success rate and LIBERO-Plus with 85.1% success rate. Our real-robot benchmark demonstrates that StellaVLA can use both human/robot demos and human-to-robot (XR) demos as in-context structured demonstration to help VLA model adapt to OOD tasks.

Advances in learning-based robotic manipulation, such as Vision-Language-Action (VLA) models and Video Action Models (VAMs), heavily rely on high-quality teleoperation data. Their capabilities are strictly upper-bounded by the quality of the underlying human demonstrations. Current gradient-based retargeting algorithms often converge to different local minima, resulting in jitter that affects data quality and teleoperation experience. To address this, we introduce the Sampling-Based Retargeter (SBR), a novel gradient-free retargeting method drawn from the rich literature of sampling-based control and explicitly designed for low-jitter, real-time kinematic retargeting. We evaluate SBR both in simulation and through a rigorous real-world user study involving 18 participants performing 3 complex manipulation tasks. Compared to gradient-based baselines, SBR achieved the highest overall task success rate (54.1%) while significantly reducing operator cognitive fatigue, recording the lowest NASA-TLX workload score (36.4 out of 100). Ultimately, we establish SBR as a highly effective, intuitive retargeter for dexterous manipulation, providing the community with a rigorous benchmarking methodology to guide future retargeting research.

Activation compressed training provides a solution towards reducing the memory cost of training deep neural networks~(DNNs). However, state-of-the-art work combines a search of quantization bit-width with the training, which makes the procedure complicated and less transparent. To this end, we propose a simple and effective method to compress DNN training. Our method is motivated by an instructive observation: DNN backward propagation mainly utilizes the low-frequency component (LFC) of the activation maps, while the majority of memory is for caching the high-frequency component (HFC) during the training. This indicates the HFC of activation maps is highly redundant and compressible during DNN training, which inspires our proposed Dual Activation Precision (DIVISION). During the training, DIVISION preserves the high-precision copy of LFC and compresses the HFC into a light-weight copy with low numerical precision. This can significantly reduce the memory cost without negatively affecting the precision of backward propagation such that DIVISION maintains competitive model accuracy. Experiment results show DIVISION has better comprehensive performance than state-of-the-art methods, including over 10x compression of activation maps and competitive training throughput, without loss of model accuracy.

Dominant dual-encoder models enable efficient image-text retrieval but suffer from limited accuracy while the cross-encoder models offer higher accuracy at the expense of efficiency. Distilling cross-modality matching knowledge from cross-encoder to dual-encoder provides a natural approach to harness their strengths. Thus we investigate the following valuable question: how to make cross-encoder a good teacher for dual-encoder? Our findings are threefold:(1) Cross-modal similarity score distribution of cross-encoder is more concentrated while the result of dual-encoder is nearly normal making vanilla logit distillation less effective. However ranking distillation remains practical as it is not affected by the score distribution.(2) Only the relative order between hard negatives conveys valid knowledge while the order information between easy negatives has little significance.(3) Maintaining the coordination between distillation loss and dual-encoder training loss is beneficial for knowledge transfer. Based on these findings we propose a novel Contrastive Partial Ranking Distillation (CPRD) method which implements the objective of mimicking relative order between hard negative samples with contrastive learning. This approach coordinates with the training of the dual-encoder effectively transferring valid knowledge from the cross-encoder to the dual-encoder. Extensive experiments on image-text retrieval and ranking tasks show that our method surpasses other distillation methods and significantly improves the accuracy of dual-encoder.

Recent advances in spoken dialogue language models have shifted from turn-based to full-duplex designs, where the model continuously listens to the user while generating responses. However, existing duplex backbones still lack a native channel for in-conversation planning and tool calling, leaving real-time agentic behaviour either tied to turn boundaries or relegated to an external cascade. We propose DuplexSLA, a native full-duplex Speech-Language-Action foundation model that decodes assistant audio together with a structured action stream on a shared 160 ms chunk timeline. DuplexSLA is built on a dual-stream three-channel formulation: a continuous user audio channel, a discrete assistant audio channel, and a rate-limited textual action channel, all decoded jointly by a single backbone, so that listening, speaking, planning, and tool calling unfold on one shared clock. Two capabilities define the model: (1) semantic-driven turn-taking control, where interruption, pause, and backchannel are handled inside the same backbone instead of by an external semantic VAD; and (2) in-conversation planning and tool calling, where planning text and structured tool calls are emitted on the action channel without halting assistant audio, so that multi-action and backchannel-triggered tool use are interleaved with ongoing speech. To evaluate these capabilities together, we further construct DuplexSLA-Bench, a duplex benchmark covering pause, interrupt, and backchannel turn-taking together with three styles of in-conversation tool calling. Our project page, interactive demos, and the DuplexSLA-Bench evaluation suite are publicly available at https://github.com/hyzhang24/DuplexSLA.

Agents built on large language models (LLMs) have excelled in turn-by-turn human-AI collaboration but struggle with simultaneous tasks requiring real-time interaction. Latency issues and the challenge of inferring variable human strategies hinder their ability to make autonomous decisions without explicit instructions. Through experiments with current independent System 1 and System 2 methods, we validate the necessity of using Dual Process Theory (DPT) in real-time tasks. We propose DPT-Agent, a novel language agent framework that integrates System 1 and System 2 for efficient real-time simultaneous human-AI collaboration. DPT-Agent's System 1 uses a Finite-state Machine (FSM) and code-as-policy for fast, intuitive, and controllable decision-making. DPT-Agent's System 2 integrates Theory of Mind (ToM) and asynchronous reflection to infer human intentions and perform reasoning-based autonomous decisions. We demonstrate the effectiveness of DPT-Agent through further experiments with rule-based agents and human collaborators, showing significant improvements over mainstream LLM-based frameworks. To the best of our knowledge, DPT-Agent is the first language agent framework that achieves successful real-time simultaneous human-AI collaboration autonomously. Code of DPT-Agent can be found in https://github.com/sjtu-marl/DPT-Agent.

The Base-New Trade-off (BNT) problem universally exists during the optimization of CLIP-based prompt tuning, where continuous fine-tuning on base (target) classes leads to a simultaneous decrease of generalization ability on new (unseen) classes. Existing approaches attempt to regulate the prompt tuning process to balance BNT by appending constraints. However, imposed on the same target prompt, these constraints fail to fully avert the mutual exclusivity between the optimization directions for base and new. As a novel solution to this challenge, we propose the plug-and-play Dual-Prompt Collaboration (DPC) framework, the first that decoupling the optimization processes of base and new tasks at the prompt level. Specifically, we clone a learnable parallel prompt based on the backbone prompt, and introduce a variable Weighting-Decoupling framework to independently control the optimization directions of dual prompts specific to base or new tasks, thus avoiding the conflict in generalization. Meanwhile, we propose a Dynamic Hard Negative Optimizer, utilizing dual prompts to construct a more challenging optimization task on base classes for enhancement. For interpretability, we prove the feature channel invariance of the prompt vector during the optimization process, providing theoretical support for the Weighting-Decoupling of DPC. Extensive experiments on multiple backbones demonstrate that DPC can significantly improve base performance without introducing any external knowledge beyond the base classes, while maintaining generalization to new classes. Code is available at: https://github.com/JREion/DPC.

This work studies the convergence of two-timescale stochastic approximations (SA), a class of iterative algorithms that update two sets of parameters in fast and slow timescales respectively. Notable examples of two-timescale SA in reinforcement learning (RL) include temporal difference learning with gradient correction (TDC) and actor-critic methods. Previously, the stability (i.e., boundedness) and convergence of two-timescale SA were only established under i.i.d. noise. This work instead establishes the stability and convergence of two-timescale SA under Markovian noise, a setup that is more realistic in RL. Notably, we do not need to use any projection operator and the noise does not need to live in a compact space. Our key technical novelty is to control the fast timescale parameter with the running max of the slow timescale parameter, instead of with the current slow timescale parameter, as most prior works do. As a key application, we establish the first almost sure convergence of TDC with eligibility traces under off-policy learning with linear function approximation.

Text-to-image (T2I) models excel on single-entity prompts but struggle with multi-subject descriptions, often showing attribute leakage, identity entanglement, and subject omissions. We introduce the first theoretical framework with a principled, optimizable objective for steering sampling dynamics toward multi-subject fidelity. Viewing flow matching (FM) through stochastic optimal control (SOC), we formulate subject disentanglement as control over a trained FM sampler. This yields two architecture-agnostic algorithms: (i) a training-free test-time controller that perturbs the base velocity with a single-pass update, and (ii) Adjoint Matching, a lightweight fine-tuning rule that regresses a control network to a backward adjoint signal while preserving base-model capabilities. The same formulation unifies prior attention heuristics, extends to diffusion models via a flow-diffusion correspondence, and provides the first fine-tuning route explicitly designed for multi-subject fidelity. Empirically, on Stable Diffusion 3.5, FLUX, and Stable Diffusion XL, both algorithms consistently improve multi-subject alignment while maintaining base-model style. Test-time control runs efficiently on commodity GPUs, and fine-tuned controllers trained on limited prompts generalize to unseen ones. We further highlight FOCUS (Flow Optimal Control for Unentangled Subjects), which achieves state-of-the-art multi-subject fidelity across models.

We present a deep learning method for composite and task-driven motion control for physically simulated characters. In contrast to existing data-driven approaches using reinforcement learning that imitate full-body motions, we learn decoupled motions for specific body parts from multiple reference motions simultaneously and directly by leveraging the use of multiple discriminators in a GAN-like setup. In this process, there is no need of any manual work to produce composite reference motions for learning. Instead, the control policy explores by itself how the composite motions can be combined automatically. We further account for multiple task-specific rewards and train a single, multi-objective control policy. To this end, we propose a novel framework for multi-objective learning that adaptively balances the learning of disparate motions from multiple sources and multiple goal-directed control objectives. In addition, as composite motions are typically augmentations of simpler behaviors, we introduce a sample-efficient method for training composite control policies in an incremental manner, where we reuse a pre-trained policy as the meta policy and train a cooperative policy that adapts the meta one for new composite tasks. We show the applicability of our approach on a variety of challenging multi-objective tasks involving both composite motion imitation and multiple goal-directed control.

Teaching large language models (LLMs) to be faithful in the provided context is crucial for building reliable information-seeking systems. Therefore, we propose a systematic framework, CANOE, to improve the faithfulness of LLMs in both short-form and long-form generation tasks without human annotations. Specifically, we first synthesize short-form question-answering (QA) data with four diverse tasks to construct high-quality and easily verifiable training data without human annotation. Also, we propose Dual-GRPO, a rule-based reinforcement learning method that includes three tailored rule-based rewards derived from synthesized short-form QA data, while simultaneously optimizing both short-form and long-form response generation. Notably, Dual-GRPO eliminates the need to manually label preference data to train reward models and avoids over-optimizing short-form generation when relying only on the synthesized short-form QA data. Experimental results show that CANOE greatly improves the faithfulness of LLMs across 11 different downstream tasks, even outperforming the most advanced LLMs, e.g., GPT-4o and OpenAI o1.

We study the problem of learning to perform multi-stage robotic manipulation tasks, with applications to cable routing, where the robot must route a cable through a series of clips. This setting presents challenges representative of complex multi-stage robotic manipulation scenarios: handling deformable objects, closing the loop on visual perception, and handling extended behaviors consisting of multiple steps that must be executed successfully to complete the entire task. In such settings, learning individual primitives for each stage that succeed with a high enough rate to perform a complete temporally extended task is impractical: if each stage must be completed successfully and has a non-negligible probability of failure, the likelihood of successful completion of the entire task becomes negligible. Therefore, successful controllers for such multi-stage tasks must be able to recover from failure and compensate for imperfections in low-level controllers by smartly choosing which controllers to trigger at any given time, retrying, or taking corrective action as needed. To this end, we describe an imitation learning system that uses vision-based policies trained from demonstrations at both the lower (motor control) and the upper (sequencing) level, present a system for instantiating this method to learn the cable routing task, and perform evaluations showing great performance in generalizing to very challenging clip placement variations. Supplementary videos, datasets, and code can be found at https://sites.google.com/view/cablerouting.

Large Vision-Language-Action (VLA) models, leveraging powerful pre trained Vision-Language Models (VLMs) backends, have shown promise in robotic control due to their impressive generalization ability. However, the success comes at a cost. Their reliance on VLM backends with billions of parameters leads to high computational costs and inference latency, limiting the testing scenarios to mainly quasi-static tasks and hindering performance in dynamic tasks requiring rapid interactions. To address these limitations, this paper proposes HiRT, a Hierarchical Robot Transformer framework that enables flexible frequency and performance trade-off. HiRT keeps VLMs running at low frequencies to capture temporarily invariant features while enabling real-time interaction through a high-frequency vision-based policy guided by the slowly updated features. Experiment results in both simulation and real-world settings demonstrate significant improvements over baseline methods. Empirically, in static tasks, we double the control frequency and achieve comparable success rates. Additionally, on novel real-world dynamic ma nipulation tasks which are challenging for previous VLA models, HiRT improves the success rate from 48% to 75%.

Gaze estimation methods estimate gaze from facial appearance with a single camera. However, due to the limited view of a single camera, the captured facial appearance cannot provide complete facial information and thus complicate the gaze estimation problem. Recently, camera devices are rapidly updated. Dual cameras are affordable for users and have been integrated in many devices. This development suggests that we can further improve gaze estimation performance with dual-view gaze estimation. In this paper, we propose a dual-view gaze estimation network (DV-Gaze). DV-Gaze estimates dual-view gaze directions from a pair of images. We first propose a dual-view interactive convolution (DIC) block in DV-Gaze. DIC blocks exchange dual-view information during convolution in multiple feature scales. It fuses dual-view features along epipolar lines and compensates for the original feature with the fused feature. We further propose a dual-view transformer to estimate gaze from dual-view features. Camera poses are encoded to indicate the position information in the transformer. We also consider the geometric relation between dual-view gaze directions and propose a dual-view gaze consistency loss for DV-Gaze. DV-Gaze achieves state-of-the-art performance on ETH-XGaze and EVE datasets. Our experiments also prove the potential of dual-view gaze estimation. We release codes in https://github.com/yihuacheng/DVGaze.

We propose a cross-modal attention distillation framework to train a dual-encoder model for vision-language understanding tasks, such as visual reasoning and visual question answering. Dual-encoder models have a faster inference speed than fusion-encoder models and enable the pre-computation of images and text during inference. However, the shallow interaction module used in dual-encoder models is insufficient to handle complex vision-language understanding tasks. In order to learn deep interactions of images and text, we introduce cross-modal attention distillation, which uses the image-to-text and text-to-image attention distributions of a fusion-encoder model to guide the training of our dual-encoder model. In addition, we show that applying the cross-modal attention distillation for both pre-training and fine-tuning stages achieves further improvements. Experimental results demonstrate that the distilled dual-encoder model achieves competitive performance for visual reasoning, visual entailment and visual question answering tasks while enjoying a much faster inference speed than fusion-encoder models. Our code and models will be publicly available at https://github.com/kugwzk/Distilled-DualEncoder.

A control technique is developed via Reinforcement Learning that allows arbitrary controlling of the position of an acoustic cavitation bubble in a dual-frequency standing acoustic wave field. The agent must choose the optimal pressure amplitude values to manipulate the bubble position in the range of x/lambda_0in[0.05, 0.25]. To train the agent an actor-critic off-policy algorithm (Deep Deterministic Policy Gradient) was used that supports continuous action space, which allows setting the pressure amplitude values continuously within 0 and 1, bar. A shaped reward function is formulated that minimizes the distance between the bubble and the target position and implicitly encourages the agent to perform the position control within the shortest amount of time. In some cases, the optimal control can be 7 times faster than the solution expected from the linear theory.

Agentic systems involved in high-stake decision-making under adversarial pressure need formal guarantees not offered by existing approaches. Motivated by the operational needs of security operations centers (SOCs) that must configure endpoint detection and response (EDR) policies under adversarial pressure, we present a tool-mediated architecture: LLM agents use deterministic tools (Stackelberg best-response, Bayesian observer updates, attack-graph primitives) and select from finite action catalogs enforced at the tool-output interface. A composite Lyapunov function machine-checked in Lean 4 with zero sorry certifies controllability, observability from asymmetric sensor data, and Input-to-State Stability (ISS) robustness under intelligent adversarial disturbance, with two corollaries extending the certificate to any controller or adversary from the catalogs. On 282 real enterprise attack graphs, the claims hold with margin. On paired offensive/defensive telemetry, a tool-mediated Claude Sonnet 4 controller reduces the attacker's expected payoff (game value) by 59% relative to a deterministic greedy baseline, with zero variance across 40 runs at four temperatures. A Claude Haiku 4.5 controller converges to suboptimal game values but stays catalog-bounded over an additional 40 runs, demonstrating that architectural stability is not dependent on the controller capability. The LLM agent's non-determinism furthers creative exploration of strategies, while the tool-mediated architecture ensures system stability.

Long-horizon manipulation requires robots to remember cues that are no longer in view while responding to moving objects. Yet vision-language-action (VLA) policies often rely on the latest observation, and refreshing their visual context typically requires another costly vision-language model (VLM) pass. We present D^2-VLA, which combines dual memory and dual-frequency control at the KV-cache interface of a pretrained VLA. D^2-VLA uses block-wise causal KV caching to encode observations incrementally and, guided by distinct temporal attention patterns, constructs separate historical KV read views for the VLM and action expert. Between periodic VLM updates, a gated adapter incorporates fresh visual features into the latest history-conditioned KV block, while a short fast-memory queue supports action replanning. We introduce DOMINO-Long, a ten-task benchmark requiring robots to use earlier visual cues when manipulating moving objects. D^2-VLA achieves complete-task success rates of 29.3\% on DOMINO, compared with 9.6\% for π_{0.5} and 17.2\% for PUMA, and 60.0\% on DOMINO-Long, compared with 35.4\% and 20.6\%, respectively. It improves success rates on eight real-robot tasks and reaches 97.5\% on LIBERO-Long and 74.3\% on RoboTwin 2.0.

Vision-language models (VLMs) enable embodied agents to reason and act from visual observations and language instructions. Reinforcement learning (RL) post-training enhances these capabilities using task feedback, but current on-policy RL runtimes execute rollout, reference scoring, and actor training in strict serial phases. While effective for text-only RL, this phase-granular execution is wasteful for VLMs, where processing dense video inputs and prompt prefixes occupies a large fraction of each phase. Because prefix processing is independent of the generated response, it can be run alongside rollout decoding, which leaves GPU compute capacity underutilized, without breaking synchronous on-policy semantics. We present Rollplex, a runtime that decomposes the reference and training phase and moves the prefix computation into the rollout decode window. Realizing this schedule requires more than concurrent kernel launches: naive colocation of Qwen2.5-VL-32\,B requires roughly 165\,GiB per GPU, while rollout and training prefer different tensor-parallel (TP) degrees and weight layouts. Rollplex addresses these constraints with two mechanisms. Phase-aware memory management controls HBM residency according to producer--consumer lifetimes. Parallelism-aware weight sharing uses the same physical storage for layout-compatible tensors across distinct TP degrees and reconstructs only incompatible tensors, avoiding a complete second actor copy. On 32 H800 GPUs, Rollplex achieves 1.23times--1.30times speedup over serial colocation and 1.57times--2.24times over disaggregation under the same GPU budget, while preserving the synchronous RL update.

Long-horizon tool-using agents must reason over user goals, domain policies, tool calls, simulator state, and delayed verifiable rewards. Reinforcement learning (RL) is a natural fit for this setting, but multi-turn on-policy rollouts create long contexts, while model-specific attention layers may require custom masks and learned sink normalization. We present SINKFLEX-RL, a modular training system for RL in dual-control tool-use environments. The system combines a Gymnasium-compatible environment wrapper, a VERL-style rollout dataflow, group-relative policy optimization without a separate value model, and a sink-aware FlexAttention path designed to preserve model-specific sink scaling under causal and sliding-window masks. In a preliminary Tau2Bench retail run, validation reward (mean@1) rises from 0.25 early in training to 0.44 later in the observed training window, while training-score and trajectory-reward proxies also trend upward. In a fixed-configuration memory benchmark, the optimized attention path reduces peak VRAM from 28.06GB to 22.52GB at 4096 tokens, a 19.7% reduction, and runs the measured 8192-token configuration using 25.53~GB where the eager baseline runs out of memory. These results illustrate the value of integrating environment interfaces, RL dataflow, and attention-kernel design for memory-feasible long-horizon agent training.

Multi-step learning applies lookahead over multiple time steps and has proved valuable in policy evaluation settings. However, in the optimal control case, the impact of multi-step learning has been relatively limited despite a number of prior efforts. Fundamentally, this might be because multi-step policy improvements require operations that cannot be approximated by stochastic samples, hence hindering the widespread adoption of such methods in practice. To address such limitations, we introduce doubly multi-step off-policy VI (DoMo-VI), a novel oracle algorithm that combines multi-step policy improvements and policy evaluations. DoMo-VI enjoys guaranteed convergence speed-up to the optimal policy and is applicable in general off-policy learning settings. We then propose doubly multi-step off-policy actor-critic (DoMo-AC), a practical instantiation of the DoMo-VI algorithm. DoMo-AC introduces a bias-variance trade-off that ensures improved policy gradient estimates. When combined with the IMPALA architecture, DoMo-AC has showed improvements over the baseline algorithm on Atari-57 game benchmarks.

Modern consumer cameras usually employ the rolling shutter (RS) mechanism, where images are captured by scanning scenes row-by-row, yielding RS distortions for dynamic scenes. To correct RS distortions, existing methods adopt a fully supervised learning manner, where high framerate global shutter (GS) images should be collected as ground-truth supervision. In this paper, we propose a Self-supervised learning framework for Dual reversed RS distortions Correction (SelfDRSC), where a DRSC network can be learned to generate a high framerate GS video only based on dual RS images with reversed distortions. In particular, a bidirectional distortion warping module is proposed for reconstructing dual reversed RS images, and then a self-supervised loss can be deployed to train DRSC network by enhancing the cycle consistency between input and reconstructed dual reversed RS images. Besides start and end RS scanning time, GS images at arbitrary intermediate scanning time can also be supervised in SelfDRSC, thus enabling the learned DRSC network to generate a high framerate GS video. Moreover, a simple yet effective self-distillation strategy is introduced in self-supervised loss for mitigating boundary artifacts in generated GS images. On synthetic dataset, SelfDRSC achieves better or comparable quantitative metrics in comparison to state-of-the-art methods trained in the full supervision manner. On real-world RS cases, our SelfDRSC can produce high framerate GS videos with finer correction textures and better temporary consistency. The source code and trained models are made publicly available at https://github.com/shangwei5/SelfDRSC.

Motion degradation, manifested as blur in global shutter (GS) images or rolling shutter (RS) distortion in RS counterparts, remains a fundamental challenge in computational imaging, especially under fast motion or low-light conditions. While prior works have treated blur decomposition and RS temporal super-resolution as separate tasks, this separation fails to exploit their intrinsic complementarity. In this paper, we propose a unified framework to invert motion degradation and reenact imaging moment by jointly leveraging the complementary characteristics of GS blur and RS distortion. To this end, we introduce a novel dual-shutter setup that captures synchronized blur-RS image pairs and demonstrate that this combination effectively resolves temporal and spatial ambiguities inherent in both modalities. For allowing flexible performance-cost trade-offs, we further extend this dual-shutter setup to a stereo Blur-RS configuration with a narrow baseline. In addition, we construct a triaxial imaging system to collect a real-world dataset with aligned GS-RS pairs and ground-truth high-speed frames, enabling robust training and evaluation beyond synthetic data. Our proposed network explicitly disentangles motion into context-aware and temporally-sensitive representations via a dual-stream motion interpretation module, followed by a self-prompted frame reconstruction stage. Extensive experiments validate the superiority and generalizability of our approach, establishing a new paradigm for realistic high-speed video reconstruction under complex motion degradations. Codes and more resources are available at https://jixiang2016.github.io/dualBR_site/.

Real-time interaction models -- Moshi, MiniCPM-o, Qwen-Omni -- turn serving into a periodic real-time task: on every frame a session ingests streaming audio and must respond by a recurring wall-clock deadline, while its KV cache grows monotonically and stays pinned for the whole conversation. This regime hides a dangerous failure mode. On a real full-duplex stack, sustained load does not degrade serving gracefully: it falls off a cliff, jumping in one step from milliseconds per frame to a stalled engine when accumulated session state exhausts the KV pool. The collapse is metastable -- identical five-minute runs collapse or survive on run-to-run variance -- and silent: latency and deadline-miss metrics read healthy throughout. We show one move restores both stability and observability: bound each session's resident state, and latency starts telling the truth. Metronome's in-engine KV window eliminates the collapse (0/20 vs. 14/20 runs across two batches) and turns per-frame latency into a monotone load signal, on which an online admission controller discovers the schedulable concurrency; without the window, the identical controller over-admits into the wall. A first-order model predicts the collapse time within a few percent on the headline model, and a quality probe validates the bound's design by ablation: the window alone is quality-free in turn-based decoding, and its few pinned attention-sink tokens are what keep free-running generation healthy. Everything is measured end-to-end on real audio, across four interaction models on one GPU.