new

Get trending papers in your email inbox!

Subscribe

Daily Papers

byAK and the research community

Nov 19

Why Sub-4-Bit Vision CNNs Collapse and Where Mixed-Precision Recovery Stops

Deep vision models operating in resource-constrained environments depend heavily on low-bit quantization, yet compressing weights below 4 bits frequently induces catastrophic accuracy collapse. While mixed-precision recovery strategies aim to rescue accuracy by selectively retaining high-precision parameters, the fundamental mechanics of where and why these models collapse remain poorly understood. In this study, we systematically analyze the anatomy of quantization collapse across standard Vision CNNs (including ResNet and EfficientNet backbones) evaluated on the full 50,000-image ImageNet-1k validation set. First, we map the exact progression of degradation, demonstrating that collapse is highly non-linear and concentrated in late-stage pointwise projections and depthwise layers. Second, we introduce a structured, multi-step recovery waterfall that evaluates selective integer precision (INT4/INT8) and selective floating-point scales. We show that keeping less than 5% of critical layer activations in 8-bit precision recovers up to 92% of the accuracy lost during aggressive sub-4-bit compression. Finally, we bridge the hardware reality gap by evaluating deployment performance on standard ARM and x86 CPU architectures. We show that while low-bit quantization reduces memory storage requirements, standard runtime software bit-unpacking introduces a 1.48x to 21.5x execution slowdown depending on batch size, highlighting a critical trade-off between model footprint and actual edge throughput. Our findings provide a practical blueprint for navigating the limits of sub-4-bit deployment without sacrificing hardware performance.

  • 1 authors
·
Nov 16

Sustainable Edge Vision via Empirically Calibrated DVFS: Eliminating Thermal Throttling on Passively Cooled Hardware

Passive cooling eliminates the energy overhead and mechanical failure modes of fans, making it attractive for edge deployment, yet sustained Deep Neural Network (DNN) inference on passively cooled edge Systems-on-Chip (SoCs) is bottlenecked by thermal throttling. To address this, we propose an empirically calibrated, state-aware Dynamic Voltage and Frequency Scaling (DVFS) scheduler. Unlike heuristic-driven controllers, our methodology utilizes time-domain guards and absolute temperature bounds, with derivative triggers acting as safeguards against sharp thermal spikes. Evaluated on a passively cooled Raspberry Pi 5 running YOLOv8n, our scheduler eliminates all observed thermal throttling events during sustained 30-minute workloads. It outperforms a temperature-only reactive baseline by achieving a 6.8% higher frame rate (Cohen's d = 8.73) while consuming 1.9% less energy per frame. Furthermore, our optimized passive scheduling surpasses an actively cooled reference system in energy efficiency (Joules/frame), though active cooling remains superior for raw throughput. Through isolated ablations, we show that the dwell guard is necessary for run-to-run reproducibility. Finally, exploratory boundary probes indicate that the passive operating envelope closes at ambient temperatures (ge 27^circC) where nonlinear leakage defeats DVFS-based control. These results indicate that, within the mapped envelope, correct scheduling can make mechanical cooling unnecessary for sustained edge inference on this platform.

  • 2 authors
·
Sep 3

TeLLMe v2: An Efficient End-to-End Ternary LLM Prefill and Decode Accelerator with Table-Lookup Matmul on Edge FPGAs

With the emergence of wearable devices and other embedded systems, deploying large language models (LLMs) on edge platforms has become an urgent need. However, this is challenging because of their high computational and memory demands. Although recent low-bit quantization methods (e.g., BitNet, DeepSeek) compress weights to as low as 1.58~bits with minimal accuracy loss, edge deployment is still constrained by limited on-chip resources, power budgets, and the often-neglected long latency of the prefill stage. We present TeLLMe, the first table-lookup-based ternary LLM accelerator for low-power edge FPGAs that fully supports both prefill and autoregressive decoding using 1.58-bit weights and 8-bit activations. TeLLMe incorporates several novel techniques, including (1) a table-lookup-based ternary matrix multiplication (TLMM) engine utilizing grouped activations and online precomputation for low resource utilization and high throughput; (2) a fine-grained analytic URAM-based weight buffer management scheme for efficient loading and compute engine access; (3) a streaming dataflow architecture that fuses floating-point element-wise operations with linear computations to hide latency; (4) a reversed-reordered prefill stage attention with fused attention operations for high memory efficiency; and (5) a resource-efficient specialized decoding stage attention. Under a 5~W power budget, TeLLMe delivers up to 25~tokens/s decoding throughput and 0.45--0.96~s time-to-first-token (TTFT) for 64--128 token prompts, marking a significant energy-efficiency advancement in LLM inference on edge FPGAs.

  • 5 authors
·
Oct 3, 2025

eMamba: Efficient Acceleration Framework for Mamba Models in Edge Computing

State Space Model (SSM)-based machine learning architectures have recently gained significant attention for processing sequential data. Mamba, a recent sequence-to-sequence SSM, offers competitive accuracy with superior computational efficiency compared to state-of-the-art transformer models. While this advantage makes Mamba particularly promising for resource-constrained edge devices, no hardware acceleration frameworks are currently optimized for deploying it in such environments. This paper presents eMamba, a comprehensive end-to-end hardware acceleration framework explicitly designed for deploying Mamba models on edge platforms. eMamba maximizes computational efficiency by replacing complex normalization layers with lightweight hardware-aware alternatives and approximating expensive operations, such as SiLU activation and exponentiation, considering the target applications. Then, it performs an approximation-aware neural architecture search (NAS) to tune the learnable parameters used during approximation. Evaluations with Fashion-MNIST, CIFAR-10, and MARS, an open-source human pose estimation dataset, show eMamba achieves comparable accuracy to state-of-the-art techniques using 1.63-19.9times fewer parameters. In addition, it generalizes well to large-scale natural language tasks, demonstrating stable perplexity across varying sequence lengths on the WikiText2 dataset. We also quantize and implement the entire eMamba pipeline on an AMD ZCU102 FPGA and ASIC using GlobalFoundries (GF) 22 nm technology. Experimental results show 4.95-5.62times lower latency and 2.22-9.95times higher throughput, with 4.77times smaller area, 9.84times lower power, and 48.6times lower energy consumption than baseline solutions while maintaining competitive accuracy.

  • 7 authors
·
Aug 13, 2025

UniQL: Unified Quantization and Low-rank Compression for Adaptive Edge LLMs

Deploying large language model (LLM) models on mobile platforms faces significant challenges due to the limited memory and shared computational resources of the device. Resource availability may be an issue as it is directly impacted by the current device workload, adding to the uncertainty of model deployment. We introduce UniQL, a unified post-training quantization and low-rank compression framework with on-device configurable pruning rates for edge LLMs. UniQL is a general framework that integrates quantization and low-rank compression for Transformers, State Space Models (SSMs), and hybrid models to support diverse edge applications. In our proposed joint framework, we introduce an efficient structured weight-sorting method that speeds up computation by 20x, quantization-aware singular value decomposition (SVD) to minimize quantization errors, state-aware weight sorting for SSMs, and a fused rotary positional embedding (RoPE) kernel for pruned models. Our framework performs weight-sorting, fine-tuning, and quantization in the cloud in a single-pass workflow, while enabling on-device configurable pruning rates up to 35%. Our experiments show that quantized and pruned models achieve a memory reduction of 4x-5.7x and a token-throughput improvement of 2.7x-3.4x, maintaining accuracy within 5% of the original models at 15% pruning across Transformers (Llama3 and Qwen2.5), SSMs (Mamba2), and hybrid models (Nemotron-H and Bamba-v2). The code and quantized models are available at: https://github.com/enyac-group/UniQL.

Fluxion: A Differentiable DSP Runtime from Training GPU to Real-Time Edge

Native real-time audio engines meet audio deadlines but are hard to connect to machine-learning workflows, while tensor frameworks integrate with machine learning but process audio as offline batches without timing guarantees; runtime layers built on them inherit the host's scheduling and deployment footprint. This paper presents Fluxion, a Rust audio DSP runtime for cascaded second-order sections, FIR filters, and delay-line effects. Fluxion implements the parts that are specific to DSP: closed-form filter design, forward kernels, analytic adjoints for the recursion, and stability checks. It relies on existing libraries for the autodiff graph, GPU code generation (tested here on CUDA), and array interchange. One graph algebra is lowered to a differentiable training engine and to an allocation-free real-time engine; between them, a trained graph is checked for stability and frozen into a versioned artifact that an edge device checks again before playback. We compare Fluxion with six framework-hosted and native baselines under one float32 protocol. Among the systems that compute the exact recursion, Fluxion has the highest GPU throughput when data stays on the device and the highest throughput on most CPU workloads, while its CPU training step is slower than those of torchaudio and GRAFX. Its test suite checks the audio thread for allocations with an instrumented allocator, and we report measured latency tails. Fluxion is open source at https://github.com/matteospanio/fluxion.

T-MAC: CPU Renaissance via Table Lookup for Low-Bit LLM Deployment on Edge

The deployment of Large Language Models (LLMs) on edge devices is increasingly important to enhance on-device intelligence. Weight quantization is crucial for reducing the memory footprint of LLMs on devices. However, low-bit LLMs necessitate mixed precision matrix multiplication (mpGEMM) of low precision weights and high precision activations during inference. Existing systems, lacking native support for mpGEMM, resort to dequantize weights for high precision computation. Such an indirect way can lead to a significant inference overhead. In this paper, we introduce T-MAC, an innovative lookup table(LUT)-based method designed for efficient low-bit LLM (i.e., weight-quantized LLM) inference on CPUs. T-MAC directly supports mpGEMM without dequantization, while simultaneously eliminating multiplications and reducing additions required. Specifically, T-MAC transforms the traditional data-type-centric multiplication to bit-wise table lookup, and enables a unified and scalable mpGEMM solution. Our LUT-based kernels scale linearly to the weight bit-width. Evaluated on low-bit Llama and BitNet models, T-MAC demonstrates up to 4x increase in throughput and 70% reduction in energy consumption compared to llama.cpp. For BitNet-b1.58-3B, T-MAC delivers a token generation throughput of 30 tokens/s with a single core and 71 tokens/s with eight cores on M2-Ultra, and 11 tokens/s on lower-end devices like Raspberry Pi 5, which significantly exceeds the adult average reading speed. T-MAC with LUT-based computing paradigm, paves the way for the practical deployment of low-bit LLMs on resource-constrained edge devices without compromising computational efficiency. The system is open-sourced at https://github.com/microsoft/T-MAC.

  • 7 authors
·
Jun 25, 2024 1

Intelligent Sensing-to-Action for Robust Autonomy at the Edge: Opportunities and Challenges

Autonomous edge computing in robotics, smart cities, and autonomous vehicles relies on the seamless integration of sensing, processing, and actuation for real-time decision-making in dynamic environments. At its core is the sensing-to-action loop, which iteratively aligns sensor inputs with computational models to drive adaptive control strategies. These loops can adapt to hyper-local conditions, enhancing resource efficiency and responsiveness, but also face challenges such as resource constraints, synchronization delays in multi-modal data fusion, and the risk of cascading errors in feedback loops. This article explores how proactive, context-aware sensing-to-action and action-to-sensing adaptations can enhance efficiency by dynamically adjusting sensing and computation based on task demands, such as sensing a very limited part of the environment and predicting the rest. By guiding sensing through control actions, action-to-sensing pathways can improve task relevance and resource use, but they also require robust monitoring to prevent cascading errors and maintain reliability. Multi-agent sensing-action loops further extend these capabilities through coordinated sensing and actions across distributed agents, optimizing resource use via collaboration. Additionally, neuromorphic computing, inspired by biological systems, provides an efficient framework for spike-based, event-driven processing that conserves energy, reduces latency, and supports hierarchical control--making it ideal for multi-agent optimization. This article highlights the importance of end-to-end co-design strategies that align algorithmic models with hardware and environmental dynamics and improve cross-layer interdependencies to improve throughput, precision, and adaptability for energy-efficient edge autonomy in complex environments.

  • 12 authors
·
Feb 4, 2025 2

QuartDepth: Post-Training Quantization for Real-Time Depth Estimation on the Edge

Monocular Depth Estimation (MDE) has emerged as a pivotal task in computer vision, supporting numerous real-world applications. However, deploying accurate depth estimation models on resource-limited edge devices, especially Application-Specific Integrated Circuits (ASICs), is challenging due to the high computational and memory demands. Recent advancements in foundational depth estimation deliver impressive results but further amplify the difficulty of deployment on ASICs. To address this, we propose QuartDepth which adopts post-training quantization to quantize MDE models with hardware accelerations for ASICs. Our approach involves quantizing both weights and activations to 4-bit precision, reducing the model size and computation cost. To mitigate the performance degradation, we introduce activation polishing and compensation algorithm applied before and after activation quantization, as well as a weight reconstruction method for minimizing errors in weight quantization. Furthermore, we design a flexible and programmable hardware accelerator by supporting kernel fusion and customized instruction programmability, enhancing throughput and efficiency. Experimental results demonstrate that our framework achieves competitive accuracy while enabling fast inference and higher energy efficiency on ASICs, bridging the gap between high-performance depth estimation and practical edge-device applicability. Code: https://github.com/shawnricecake/quart-depth

  • 12 authors
·
Mar 20, 2025 2

RefactorCoderQA: Benchmarking LLMs for Multi-Domain Coding Question Solutions in Cloud and Edge Deployment

To optimize the reasoning and problem-solving capabilities of Large Language Models (LLMs), we propose a novel cloud-edge collaborative architecture that enables a structured, multi-agent prompting framework. This framework comprises three specialized components: GuideLLM, a lightweight model deployed at the edge to provide methodological guidance; SolverLLM, a more powerful model hosted in the cloud responsible for generating code solutions; and JudgeLLM, an automated evaluator for assessing solution correctness and quality. To evaluate and demonstrate the effectiveness of this architecture in realistic settings, we introduce RefactorCoderQA, a comprehensive benchmark designed to evaluate and enhance the performance of Large Language Models (LLMs) across multi-domain coding tasks. Motivated by the limitations of existing benchmarks, RefactorCoderQA systematically covers various technical domains, including Software Engineering, Data Science, Machine Learning, and Natural Language Processing, using authentic coding challenges from Stack Overflow. Extensive experiments reveal that our fine-tuned model, RefactorCoder-MoE, achieves state-of-the-art performance, significantly outperforming leading open-source and commercial baselines with an overall accuracy of 76.84%. Human evaluations further validate the interpretability, accuracy, and practical relevance of the generated solutions. In addition, we evaluate system-level metrics, such as throughput and latency, to gain deeper insights into the performance characteristics and trade-offs of the proposed architecture.

  • 4 authors
·
Sep 12, 2025

ELUTQ: Efficient LUT-Aware Quantization for Deploying Large Language Models on Edge Devices

Weight quantization effectively reduces memory consumption and enables the deployment of large language models on CPU-based edge devices, yet existing hardware-friendly methods often rely on uniform quantization, which suffers from poor weight-distribution fitting and high dequantization overhead under low-bit settings. In this paper, we propose ELUTQ, an efficient quantization framework featuring a novel quantization format termed Hierarchical Linear Quantization (HLQ). HLQ is designed to better capture the statistical characteristics of weights without increasing the computational cost of bit-serial LUT-based GEMM operations, thereby eliminating dequantization overhead. HLQ is orthogonal to existing quantization algorithms. For the LLaMA3.1-8B model, when combined with post-training quantization, HLQ improves uniform quantization by achieving approximately 8 percent perplexity reduction at 3-bit precision and 85 percent perplexity reduction at 2-bit precision. When combined with efficient finetuning techniques, HLQ further improves model accuracy. We also integrate a disk-offload technique into ELUTQ, enabling it to complete the quantization of LLaMA3.1-70B using only 64 GB of CPU memory and 48 GB of VRAM, significantly reducing the hardware requirements for large-scale model quantization. To enable efficient deployment on edge devices, ELUTQ provides high-performance CPU kernels to support end-to-end inference. Under a 4-thread configuration with batch size 1, our 2-bit quantized LLaMA2-7B model achieves a throughput of more than 25 tokens per second on an Apple M2 chip. All the code is available at https://github.com/Nkniexin/ELUTQ.

  • 5 authors
·
Oct 22, 2025

A Novel Compression Framework for YOLOv8: Achieving Real-Time Aerial Object Detection on Edge Devices via Structured Pruning and Channel-Wise Distillation

Efficient deployment of deep learning models for aerial object detection on resource-constrained devices requires significant compression without com-promising performance. In this study, we propose a novel three-stage compression pipeline for the YOLOv8 object detection model, integrating sparsity-aware training, structured channel pruning, and Channel-Wise Knowledge Distillation (CWD). First, sparsity-aware training introduces dynamic sparsity during model optimization, effectively balancing parameter reduction and detection accuracy. Second, we apply structured channel pruning by leveraging batch normalization scaling factors to eliminate redundant channels, significantly reducing model size and computational complexity. Finally, to mitigate the accuracy drop caused by pruning, we employ CWD to transfer knowledge from the original model, using an adjustable temperature and loss weighting scheme tailored for small and medium object detection. Extensive experiments on the VisDrone dataset demonstrate the effectiveness of our approach across multiple YOLOv8 variants. For YOLOv8m, our method reduces model parameters from 25.85M to 6.85M (a 73.51% reduction), FLOPs from 49.6G to 13.3G, and MACs from 101G to 34.5G, while reducing AP50 by only 2.7%. The resulting compressed model achieves 47.9 AP50 and boosts inference speed from 26 FPS (YOLOv8m baseline) to 45 FPS, enabling real-time deployment on edge devices. We further apply TensorRT as a lightweight optimization step. While this introduces a minor drop in AP50 (from 47.9 to 47.6), it significantly improves inference speed from 45 to 68 FPS, demonstrating the practicality of our approach for high-throughput, re-source-constrained scenarios.

  • 3 authors
·
Sep 16, 2025

Where to Split? A Pareto-Front Analysis of DNN Partitioning for Edge Inference

The deployment of deep neural networks (DNNs) on resource-constrained edge devices is frequently hindered by their significant computational and memory requirements. While partitioning and distributing a DNN across multiple devices is a well-established strategy to mitigate this challenge, prior research has largely focused on single-objective optimization, such as minimizing latency or maximizing throughput. This paper challenges that view by reframing DNN partitioning as a multi-objective optimization problem. We argue that in real-world scenarios, a complex trade-off between latency and throughput exists, which is further complicated by network variability. To address this, we introduce ParetoPipe, an open-source framework that leverages Pareto front analysis to systematically identify optimal partitioning strategies that balance these competing objectives. Our contributions are threefold: we benchmark pipeline partitioned inference on a heterogeneous testbed of Raspberry Pis and a GPU-equipped edge server; we identify Pareto-optimal points to analyze the latency-throughput trade-off under varying network conditions; and we release a flexible, open-source framework to facilitate distributed inference and benchmarking. This toolchain features dual communication backends, PyTorch RPC and a custom lightweight implementation, to minimize overhead and support broad experimentation.

  • 4 authors
·
Jan 12

Universal Fractal Natural Language Decision Map: Real-Time Edge Triage Across Heterogeneous Domains

Deploying Large Language Models for runtime operational triage incurs prohibitive latency (>100-500 ms), high VRAM requirements (>4-8 GB), and excessive energy dissipation. Extending Mandelbrot Fractal Neural Synthesis (Dagli et al., 2026), this paper presents the Universal Fractal Natural Language Decision Map, realized via the werr machine-native edge reflex runtime and the production answerr platform (https://answerr.me). Operating entirely without stored weight tensors (0 Bytes VRAM), the engine synthesizes deterministic decisions---noul (Boolean), choice (categorical), and score (ordinal)---by dynamically modulating 24-byte coordinate seeds along the chaotic boundary of the Mandelbrot set and evaluating 4-quadrant escape dynamics. Drawing inspiration from biological System-One reflex arcs, the engine introduces: (i) an Auto-Seed Router with domain projector Phi_D yielding a +28.8% accuracy gain over linear baselines; (ii) an Information-Theoretic Acoustic Damping Filter grounded in token entropy and phonetic spectral density that insulates against prompt injections (0.0% empirical bypass; 95% Wilson CI: [0.0%, 30.8%]) while pruning escape iterations by 45.8% (accelerating throughput 2.5x to 3.31 ms latency); and (iii) an Organic Dynamic Calibration framework using O(1) Exponential Moving Average (EMA, alpha=0.03) and quadrant phase rotation to eliminate positional bias. Benchmarked on bare-metal infrastructure (api.answerr.me:4431) across 1,150+ verified decisions (3,200+ questions) and ranked World #1 on the independent JevBench suite (81.65%), the framework achieves 92.6% macro-accuracy (95% CI: [90.8%, 94.1%]) with 7.08 ms median CPU latency. We provide an OpenAI-compatible API (/v1/chat/completions) and demonstrate feasibility on microcontrollers and 32-byte EVM smart contracts.

  • 3 authors
·
Sep 20 1

D$^{2}$MoE: Dual Routing and Dynamic Scheduling for Efficient On-Device MoE-based LLM Serving

The mixture of experts (MoE) model is a sparse variant of large language models (LLMs), designed to hold a better balance between intelligent capability and computational overhead. Despite its benefits, MoE is still too expensive to deploy on resource-constrained edge devices, especially with the demands of on-device inference services. Recent research efforts often apply model compression techniques, such as quantization, pruning and merging, to restrict MoE complexity. Unfortunately, due to their predefined static model optimization strategies, they cannot always achieve the desired quality-overhead trade-off when handling multiple requests, finally degrading the on-device quality of service. These limitations motivate us to propose the D^2MoE, an algorithm-system co-design framework that matches diverse task requirements by dynamically allocating the most proper bit-width to each expert. Specifically, inspired by the nested structure of matryoshka dolls, we propose the matryoshka weight quantization (MWQ) to progressively compress expert weights in a bit-nested manner and reduce the required runtime memory. On top of it, we further optimize the I/O-computation pipeline and design a heuristic scheduling algorithm following our hottest-expert-bit-first (HEBF) principle, which maximizes the expert parallelism between I/O and computation queue under constrained memory budgets, thus significantly reducing the idle temporal bubbles waiting for the experts to load. Evaluations on real edge devices show that D^2MoE improves the overall inference throughput by up to 1.39times and reduces the peak memory footprint by up to 53% over the latest on-device inference frameworks, while still preserving comparable serving accuracy as its INT8 counterparts.

  • 4 authors
·
Apr 17, 2025

Exploiting Inter-Layer Expert Affinity for Accelerating Mixture-of-Experts Model Inference

In large language models like the Generative Pre-trained Transformer, the Mixture of Experts paradigm has emerged as a powerful technique for enhancing model expressiveness and accuracy. However, deploying GPT MoE models for parallel inference on distributed systems presents significant challenges, primarily due to the extensive Alltoall communication required for expert routing and aggregation. This communication bottleneck exacerbates the already complex computational landscape, hindering the efficient utilization of high-performance computing resources. In this paper, we propose a lightweight optimization technique called ExFlow, to largely accelerate the inference of these MoE models. We take a new perspective on alleviating the communication overhead by exploiting the inter-layer expert affinity. Unlike previous methods, our solution can be directly applied to pre-trained MoE models without any fine-tuning or accuracy degradation. By proposing a context-coherent expert parallelism on distributed systems, our design only uses one Alltoall communication to deliver the same functionality while previous methods all require two Alltoalls. By carefully examining the conditional probability in tokens' routing across multiple layers, we proved that pre-trained GPT MoE models implicitly exhibit a strong inter-layer expert affinity. We then design an efficient integer programming model to capture such features and show that by properly placing the experts on corresponding GPUs, we can reduce up to 67% cross-GPU routing latency. Our solution beats the cutting-edge MoE implementations with experts from 8 to 64, with up to 2.2x improvement in inference throughput. We further provide a detailed study of how the model implicitly acquires this expert affinity at the very early training stage and how this affinity evolves and stabilizes during training.

  • 6 authors
·
Jan 16, 2024

Stable Code Technical Report

We introduce Stable Code, the first in our new-generation of code language models series, which serves as a general-purpose base code language model targeting code completion, reasoning, math, and other software engineering-based tasks. Additionally, we introduce an instruction variant named Stable Code Instruct that allows conversing with the model in a natural chat interface for performing question-answering and instruction-based tasks. In this technical report, we detail the data and training procedure leading to both models. Their weights are available via Hugging Face for anyone to download and use at https://huggingface.co/stabilityai/stable-code-3b and https://huggingface.co/stabilityai/stable-code-instruct-3b. This report contains thorough evaluations of the models, including multilingual programming benchmarks, and the MT benchmark focusing on multi-turn dialogues. At the time of its release, Stable Code is the state-of-the-art open model under 3B parameters and even performs comparably to larger models of sizes 7 billion and 15 billion parameters on the popular Multi-PL benchmark. Stable Code Instruct also exhibits state-of-the-art performance on the MT-Bench coding tasks and on Multi-PL completion compared to other instruction tuned models. Given its appealing small size, we also provide throughput measurements on a number of edge devices. In addition, we open source several quantized checkpoints and provide their performance metrics compared to the original model.

  • 11 authors
·
Apr 1, 2024

MNN-Pocket-0.3B Technical Report

This technical report presents MNN-Pocket-0.3B, a compact 300M-parameter dense language model designed for efficient on-device deployment and supporting context lengths of up to 32K tokens. With an INT4 deployment footprint of only 173 MB and decoding throughput of up to 466 tokens/s on iPad Pro M5 (Metal), it can be seamlessly integrated into applications on edge devices such as smartphones and smart glasses. MNN-Pocket-0.3B is developed through the co-design of its architecture, data, training pipeline, and inference system. Hardware-aware architecture selection and dependency-aware vocabulary pruning balance model capability with on-device memory and compute constraints. A four-stage pre-training pipeline covering approximately 4.1 trillion high-quality Chinese and English tokens equips the model with broad knowledge and reasoning capabilities. This is followed by a three-stage post-training pipeline comprising instruction fine-tuning, multi-teacher on-policy distillation, and quantization-aware training. Finally, hardware-specific optimizations in the MNN inference engine enable fast, memory-efficient inference and long-context processing. Extensive evaluations demonstrate that MNN-Pocket-0.3B achieves frontier-level performance among models of comparable size, with particularly strong results in Chinese and English knowledge and reasoning, mathematics, coding, and instruction following. It consistently outperforms similarly sized open-source models and even surpasses several 0.5B-parameter models on instruction-following benchmarks. We release MNN-Pocket-0.3B with open weights and ready-to-use MNN deployment packages. We hope it will provide a practical foundation for capable, responsive, and memory-efficient edge applications while advancing research and development in on-device language models.

  • 1 authors
·
Nov 8

EdgeCIM: A Hardware-Software Co-Design for CIM-Based Acceleration of Small Language Models

The growing demand for deploying Small Language Models (SLMs) on edge devices, including laptops, smartphones, and embedded platforms, has exposed fundamental inefficiencies in existing accelerators. While GPUs handle prefill workloads efficiently, the autoregressive decoding phase is dominated by GEMV operations that are inherently memory-bound, resulting in poor utilization and prohibitive energy costs at the edge. In this work, we present EdgeCIM, a hardware-software co-design framework that rethinks accelerator design for end-to-end decoder-only inference. At its core is a CIM macro, implemented in 65nm, coupled with a tile-based mapping strategy that balances pipeline stages, maximizing parallelism while alleviating DRAM bandwidth bottlenecks. Our simulator enables design space exploration of SLMs up to 4B parameters, identifying Pareto-optimal configurations in terms of latency and energy. Compared to an NVIDIA Orin Nano, EdgeCIM achieves up to 7.3x higher throughput and 49.59x better energy efficiency on LLaMA3.2-1B, and delivers 9.95x higher throughput than Qualcomm SA8255P on LLaMA3.2-3B. Extensive benchmarks on TinyLLaMA-1.1B, LLaMA3.2 (1B, 3B), Phi-3.5-mini-3.8B, Qwen2.5 (0.5B, 1.5B, 3B), SmolLM2-1.7B, SmolLM3-3B, and Qwen3 (0.6B, 1.7B, 4B) reveal that our accelerator, under INT4 precision, achieves on average 336.42 tokens/s and 173.02 tokens/J. These results establish EdgeCIM as a compelling solution towards real-time, energy-efficient edge-scale SLM inference.

  • 5 authors
·
Apr 12

SpeContext: Enabling Efficient Long-context Reasoning with Speculative Context Sparsity in LLMs

In this paper, we point out that the objective of the retrieval algorithms is to align with the LLM, which is similar to the objective of knowledge distillation in LLMs. We analyze the similarity in information focus between the distilled language model(DLM) and the original LLM from the perspective of information theory, and thus propose a novel paradigm that leverages a DLM as the retrieval algorithm. Based on the insight, we present SpeContext, an algorithm and system co-design for long-context reasoning. (1) At the algorithm level, SpeContext proposes lightweight retrieval head based on the head-level attention weights of DLM, achieving > 90% parameters reduction by pruning the redundancy. (2) At the system level, SpeContext designs an asynchronous prefetch dataflow via the elastic loading strategy, effectively overlapping KV cache retrieval with the LLM computation. (3) At the compilation level, SpeContext constructs the theoretical memory model and implements an adaptive memory management system to achieve acceleration by maximizing GPU memory utilization. We deploy and evaluate SpeContext in two resourceconstrained environments, cloud and edge. Extensive experiments show that, compared with the Huggingface framework, SpeContext achieves up to 24.89x throughput improvement in cloud and 10.06x speedup in edge with negligible accuracy loss, pushing the Pareto frontier of accuracy and throughput.

Return of the Encoder: Maximizing Parameter Efficiency for SLMs

The dominance of large decoder-only language models has overshadowed encoder-decoder architectures, despite their fundamental efficiency advantages in sequence processing. For small language models (SLMs) - those with 1 billion parameters or fewer - our systematic analysis across GPU, CPU, and NPU platforms reveals that encoder-decoder architectures achieve 47% lower first-token latency and 4.7x higher throughput compared to decoder-only models on edge devices. These gains may be attributed to encoder-decoder's one-time input processing and efficient separation of understanding and generation phases. We introduce a novel knowledge distillation framework that enables encoder-decoder models to leverage capabilities from large scalable decoder-only teachers while preserving their architectural advantages, achieving up to 6 average performance points improvement across diverse tasks, with significant gains in asymmetric sequence tasks where input and output distributions can benefit from different processing approaches. When combined with modern advances like Rotary Positional Embeddings (RoPE) and Vision encoders, our systematic investigation demonstrates that encoder-decoder architectures provide a more practical path toward deploying capable language models in resource-constrained environments. Our findings challenge the prevailing trend toward decoder-only scaling, showing that architectural choices become increasingly crucial as parameter budgets decrease, particularly for on-device and edge deployments where computational efficiency is paramount.

  • 3 authors
·
Jan 27, 2025 2

Binary BPE: A Family of Cross-Platform Tokenizers for Binary Analysis

Sequence models for binary analysis are bottlenecked by byte-level tokenization: raw bytes waste precious context window capacity for transformers and other neural network architectures, and many existing text-oriented tokenizers fail on arbitrary 0x00--0xFF sequences. To address this issue, we introduce the Binary BPE tokenizer family, a set of cross-platform Byte Pair Encoding (BPE) tokenizers for executables trained on a large corpus of binaries spanning multiple platforms, architectures, and operating systems, including Linux, Windows, macOS, Android, and malware sources. We release trained tokenizers with vocabularies of 4K, 8K, 16K, 32K, and 64K tokens, enabling both systematic scaling studies and practical deployment from resource-constrained edge devices to high-throughput datacenters. These tokenizers discover interpretable patterns (ELF/PE headers, instruction sequences, cross-platform strings) while yielding multi-byte compression per token. On representative uncompressed executables (e.g., ELF/PE/Mach-O rather than compressed APKs), the Binary BPE tokenizers typically allow for roughly 2-3x more binary content per fixed-length transformer context window than raw bytes, enabling more efficient research and practical deployment for content identification, malware detection, reverse engineering, and optimization. We release the trained Binary BPE tokenizers on HuggingFace, providing a drop-in, open-source foundation for binary-focused language models and context-efficient agentic tools.

  • 1 authors
·
Nov 14, 2025

KV Cache Optimization Strategies for Scalable and Efficient LLM Inference

The key-value (KV) cache is a foundational optimization in Transformer-based large language models (LLMs), eliminating redundant recomputation of past token representations during autoregressive generation. However, its memory footprint scales linearly with context length, imposing critical bottlenecks on GPU memory capacity, memory bandwidth, and inference throughput as production LLMs push context windows from thousands to millions of tokens. Efficient KV cache management has thus become a first-order challenge for scalable LLM deployment. This paper provides a systematic review of recent KV cache optimization techniques, organizing them into five principal directions: cache eviction, cache compression, hybrid memory solutions, novel attention mechanisms, and combination strategies. For each category we analyze the underlying mechanisms, deployment trade-offs, and empirical performance across memory reduction, throughput, and model accuracy metrics. We further map techniques to seven practical deployment scenarios, including long-context single requests, high-throughput datacenter serving, edge devices, multi-turn conversations, and accuracy-critical reasoning, providing actionable guidance for practitioners selecting among competing approaches. Our analysis reveals that no single technique dominates across all settings; instead, the optimal strategy depends on context length, hardware constraints, and workload characteristics, pointing toward adaptive, multi-stage optimization pipelines as a promising direction for future research.

  • 3 authors
·
Mar 19

FlashSchNet: Fast and Accurate Coarse-Grained Neural Network Molecular Dynamics

Graph neural network (GNN) potentials such as SchNet improve the accuracy and transferability of molecular dynamics (MD) simulation by learning many-body interactions, but remain slower than classical force fields due to fragmented kernels and memory-bound pipelines that underutilize GPUs. We show that a missing principle is making GNN-MD IO-aware, carefully accounting for reads and writes between GPU high-bandwidth memory (HBM) and on-chip SRAM. We present FlashSchNet, an efficient and accurate IO-aware SchNet-style GNN-MD framework built on four techniques: (1) flash radial basis, which fuses pairwise distance computation, Gaussian basis expansion, and cosine envelope into a single tiled pass, computing each distance once and reusing it across all basis functions; (2) flash message passing, which fuses cutoff, neighbor gather, filter multiplication, and reduction to avoid materializing edge tensors in HBM; (3) flash aggregation, which reformulates scatter-add via CSR segment reduce, reducing atomic writes by a factor of feature dimension and enabling contention-free accumulation in both forward and backward passes; (4) channel-wise 16-bit quantization that exploits the low per-channel dynamic range in SchNet MLP weights to further improve throughput with negligible accuracy loss. On a single NVIDIA RTX PRO 6000, FlashSchNet achieves 1000 ns/day aggregate simulation throughput over 64 parallel replicas on coarse-grained (CG) protein containing 269 beads (6.5x faster than CGSchNet baseline with 80% reduction of peak memory), surpassing classical force fields (e.g. MARTINI) while retaining SchNet-level accuracy and transferability.

  • 5 authors
·
Feb 13

NanoFlow: Towards Optimal Large Language Model Serving Throughput

The increasing usage of Large Language Models (LLMs) has resulted in a surging demand for planet-scale serving systems, where tens of thousands of GPUs continuously serve hundreds of millions of users. Consequently, throughput (under reasonable latency constraints) has emerged as a key metric that determines serving systems' performance. To boost throughput, various methods of inter-device parallelism (e.g., data, tensor, pipeline) have been explored. However, existing methods do not consider overlapping the utilization of different resources within a single device, leading to underutilization and sub-optimal performance. We propose NanoFlow, a novel serving framework that exploits intra-device parallelism, which overlaps the usage of resources including compute, memory, and network within a single device through operation co-scheduling. To exploit intra-device parallelism, NanoFlow introduces two key innovations: First, NanoFlow splits requests into nano-batches at the granularity of operations, which breaks the dependency of sequential operations in LLM inference and enables overlapping; then, to get benefit from overlapping, NanoFlow uses an operation-level pipeline with execution unit scheduling, which partitions the device's functional units and simultaneously executes different operations in each unit. NanoFlow automates the pipeline setup using a parameter search algorithm, which enables easily porting NanoFlow to different models. We implement NanoFlow on NVIDIA GPUs and evaluate end-to-end serving throughput on several popular models such as LLaMA-2-70B, Mixtral 8x7B, LLaMA-3-8B, etc.. With practical workloads, NanoFlow provides 1.91x throughput boost compared to state-of-the-art serving systems achieving 59% to 72% of optimal throughput across ported models.

  • 15 authors
·
Aug 22, 2024 2

Neural Compression and Filtering for Edge-assisted Real-time Object Detection in Challenged Networks

The edge computing paradigm places compute-capable devices - edge servers - at the network edge to assist mobile devices in executing data analysis tasks. Intuitively, offloading compute-intense tasks to edge servers can reduce their execution time. However, poor conditions of the wireless channel connecting the mobile devices to the edge servers may degrade the overall capture-to-output delay achieved by edge offloading. Herein, we focus on edge computing supporting remote object detection by means of Deep Neural Networks (DNNs), and develop a framework to reduce the amount of data transmitted over the wireless link. The core idea we propose builds on recent approaches splitting DNNs into sections - namely head and tail models - executed by the mobile device and edge server, respectively. The wireless link, then, is used to transport the output of the last layer of the head model to the edge server, instead of the DNN input. Most prior work focuses on classification tasks and leaves the DNN structure unaltered. Herein, our focus is on DNNs for three different object detection tasks, which present a much more convoluted structure, and modify the architecture of the network to: (i) achieve in-network compression by introducing a bottleneck layer in the early layers on the head model, and (ii) prefilter pictures that do not contain objects of interest using a convolutional neural network. Results show that the proposed technique represents an effective intermediate option between local and edge computing in a parameter region where these extreme point solutions fail to provide satisfactory performance. The code and trained models are available at https://github.com/yoshitomo-matsubara/hnd-ghnd-object-detectors .

  • 2 authors
·
Jul 30, 2020

An Edge Assisted Robust Smart Traffic Management and Signalling System for Guiding Emergency Vehicles During Peak Hours

Congestion in traffic is an unavoidable circumstance in many cities in India and other countries. It is an issue of major concern. The steep rise in the number of automobiles on the roads followed by old infrastructure, accidents, pedestrian traffic, and traffic rule violations all add to challenging traffic conditions. Given these poor conditions of traffic, there is a critical need for automatically detecting and signaling systems. There are already various technologies that are used for traffic management and signaling systems like video analysis, infrared sensors, and wireless sensors. The main issue with these methods is they are very costly and high maintenance is required. In this paper, we have proposed a three-phase system that can guide emergency vehicles and manage traffic based on the degree of congestion. In the first phase, the system processes the captured images and calculates the Index value which is used to discover the degree of congestion. The Index value of a particular road depends on its width and the length up to which the camera captures images of that road. We have to take input for the parameters (length and width) while setting up the system. In the second phase, the system checks whether there are any emergency vehicles present or not in any lane. In the third phase, the whole processing and decision-making part is performed at the edge server. The proposed model is robust and it takes into consideration adverse weather conditions such as hazy, foggy, and windy. It works very efficiently in low light conditions also. The edge server is a strategically placed server that provides us with low latency and better connectivity. Using Edge technology in this traffic management system reduces the strain on cloud servers and the system becomes more reliable in real-time because the latency and bandwidth get reduced due to processing at the intermediate edge server.

  • 4 authors
·
Apr 26, 2023

EdgeDetect: Importance-Aware Gradient Compression with Homomorphic Aggregation for Federated Intrusion Detection

Federated learning (FL) enables collaborative intrusion detection without raw data exchange, but conventional FL incurs high communication overhead from full-precision gradient transmission and remains vulnerable to gradient inference attacks. This paper presents EdgeDetect, a communication-efficient and privacy-aware federated IDS for bandwidth-constrained 6G-IoT environments. EdgeDetect introduces gradient smartification, a median-based statistical binarization that compresses local updates to {+1,-1} representations, reducing uplink payload by 32times while preserving convergence. We further integrate Paillier homomorphic encryption over binarized gradients, protecting against honest-but-curious servers without exposing individual updates. Experiments on CIC-IDS2017 (2.8M flows, 7 attack classes) demonstrate 98.0% multi-class accuracy and 97.9% macro F1-score, matching centralized baselines, while reducing per-round communication from 450~MB to 14~MB (96.9% reduction). Raspberry Pi-4 deployment confirms edge feasibility: 4.2~MB memory, 0.8~ms latency, and 12~mJ per inference with <0.5% accuracy loss. Under 5% poisoning attacks and severe imbalance, EdgeDetect maintains 87% accuracy and 0.95 minority class F1 (p<0.001), establishing a practical accuracy, communication, and privacy tradeoff for next-generation edge intrusion detection.

BottleFit: Learning Compressed Representations in Deep Neural Networks for Effective and Efficient Split Computing

Although mission-critical applications require the use of deep neural networks (DNNs), their continuous execution at mobile devices results in a significant increase in energy consumption. While edge offloading can decrease energy consumption, erratic patterns in channel quality, network and edge server load can lead to severe disruption of the system's key operations. An alternative approach, called split computing, generates compressed representations within the model (called "bottlenecks"), to reduce bandwidth usage and energy consumption. Prior work has proposed approaches that introduce additional layers, to the detriment of energy consumption and latency. For this reason, we propose a new framework called BottleFit, which, in addition to targeted DNN architecture modifications, includes a novel training strategy to achieve high accuracy even with strong compression rates. We apply BottleFit on cutting-edge DNN models in image classification, and show that BottleFit achieves 77.1% data compression with up to 0.6% accuracy loss on ImageNet dataset, while state of the art such as SPINN loses up to 6% in accuracy. We experimentally measure the power consumption and latency of an image classification application running on an NVIDIA Jetson Nano board (GPU-based) and a Raspberry PI board (GPU-less). We show that BottleFit decreases power consumption and latency respectively by up to 49% and 89% with respect to (w.r.t.) local computing and by 37% and 55% w.r.t. edge offloading. We also compare BottleFit with state-of-the-art autoencoders-based approaches, and show that (i) BottleFit reduces power consumption and execution time respectively by up to 54% and 44% on the Jetson and 40% and 62% on Raspberry PI; (ii) the size of the head model executed on the mobile device is 83 times smaller. We publish the code repository for reproducibility of the results in this study.

  • 5 authors
·
Jan 7, 2022

Hydra: Phase-Aware Workload Characterization of LLM Inference across Edge SoC Generations, Backends, and Quantization Levels

Edge LLM deployment is shaped by more than model size and precision: inference backend, hardware platform, memory traffic, and power management all affect latency and efficiency. We present Hydra, a common-schema, phase-aware workload characterization framework for LLM inference on edge SoCs. Hydra instruments HuggingFace Transformers and llama.cpp with a shared per-prompt timing schema and fuses those records with hardware telemetry, enabling a multi-dimensional characterization of performance, system-resource utilization, and efficiency across prefill and decode phases. Using Hydra, we evaluate three consecutive edge System-on-Chip (SoC) generations (AGX Xavier, AGX Orin, and AGX Thor), 13 instruction-tuned LLMs from seven families, five execution formats, and consider input/output-length sensitivity. The resulting artifact contains roughly 107K per-prompt records and is publicly released with Hydra. Our analysis shows that aggregate latency alone hides key deployment effects: backend structure changes where latency is introduced, quantization reduces memory traffic and energy but does not predict power monotonically, and SoC generation changes how utilization and efficiency should be interpreted. By connecting phase-level timing with system-resource utilization and efficiency metrics, Hydra enables reproducible, phase-aware characterization of edge LLM inference. Hydra's source code and the collected per-prompt trace corpus are available open-source at: https://github.com/amirtaherin/hydra

  • 12 authors
·
Aug 24

Where Should Agents Live? Energy-Memory Characterization of Agentic AI for the Edge-Cloud Continuum

As telecommunication networks evolve toward autonomous 5G-Advanced and 6G operations, agentic artificial intelligence (AI) workflows, where large language models (LLMs) execute multi-step reasoning, invoke diagnostic tools, retrieve domain knowledge, and coordinate across agent teams, are increasingly embedded across the edge-cloud continuum. While the biological brain accomplishes complex cognition on an exceptionally modest metabolic power budget of approximately 20W contemporary LLMs are profoundly energy- and memory-intensive, making sustainable lifecycle orchestration a critical operational priority. However, existing AI lifecycle metrics evaluate only isolated, single-model inferences or overlook multi-agent execution graphs entirely. Consequently, network operators lack foundational models to determine whether distributed agent communication incurs meaningful energy costs and where across edge-cloud tiers agent teams should physically reside. To address this gap, we introduce agentic-eCAL, generalizing the Energy Cost of AI Lifecycle (eCAL) metric to directed multi-agent workflows by coupling a closed-form two-rate single-call energy model (compute-bound prefill and memory-bound decode) with 7-layer OSI data transport. Grounded in hundreds of GPU benchmark configurations on NVIDIA A100 and H100, 16 open-weight models and 8 orchestration topologies, we validate components of the metric and study workflow placement implications. Our findings demonstrate that inter-agent text transport incurs 0.25% of workflow energy across 5G RAN, metro, and optical links. Therefore in edge-cloud agent placement the dominant energy cost of distribution is often not the transmission of inter-agent text itself, but the additional inference and context processing induced by that communication.

  • 4 authors
·
Sep 15 1

Towards Robust and Efficient Cloud-Edge Elastic Model Adaptation via Selective Entropy Distillation

The conventional deep learning paradigm often involves training a deep model on a server and then deploying the model or its distilled ones to resource-limited edge devices. Usually, the models shall remain fixed once deployed (at least for some period) due to the potential high cost of model adaptation for both the server and edge sides. However, in many real-world scenarios, the test environments may change dynamically (known as distribution shifts), which often results in degraded performance. Thus, one has to adapt the edge models promptly to attain promising performance. Moreover, with the increasing data collected at the edge, this paradigm also fails to further adapt the cloud model for better performance. To address these, we encounter two primary challenges: 1) the edge model has limited computation power and may only support forward propagation; 2) the data transmission budget between cloud and edge devices is limited in latency-sensitive scenarios. In this paper, we establish a Cloud-Edge Elastic Model Adaptation (CEMA) paradigm in which the edge models only need to perform forward propagation and the edge models can be adapted online. In our CEMA, to reduce the communication burden, we devise two criteria to exclude unnecessary samples from uploading to the cloud, i.e., dynamic unreliable and low-informative sample exclusion. Based on the uploaded samples, we update and distribute the affine parameters of normalization layers by distilling from the stronger foundation model to the edge model with a sample replay strategy. Extensive experimental results on ImageNet-C and ImageNet-R verify the effectiveness of our CEMA.

  • 6 authors
·
Feb 27, 2024

GPU-Initiated Communication: Dissecting Down to the Bone

GPU-initiated communication lets GPU threads post RDMA operations directly to the NIC. It underpins NVSHMEM, NCCL GIN, and DeepEP, which serve the fine-grained, latency-critical communication of Mixture-of-Experts (MoE) models, yet its performance characteristics and optimizations remain scarcely documented beyond source code, and library comparisons fail to separate the costs of the hardware mechanism from those of the library around it. This paper dissects GPU-initiated communication at the GPU-NIC boundary. We first detail the GPU-side network path: queue placement, work-request construction, doorbell ordering, and completion semantics. We then introduce mini-gda and mini-proxy, minimal transports for the GPU and CPU-proxy submission paths, and measure them alongside NVSHMEM IBGDA, NCCL GIN, DeepEP, UCCL-EP, MSCCL++, and fabric-lib on NVIDIA H100, H200, B200, and GB200 platforms. A minimal GPU path issues an operation in 0.7 μs and completes in 4.0 μs; libraries add up to 4.6 μs of issue time through queue management, memory ordering, and completion scope, and issue time scales with the SM clock. A tuned CPU proxy matches or beats the GPU path at idle, at the cost of a dedicated core whose operating state sets its latency and throughput. On either path, sharing a queue with bulk traffic raises latency by one to three orders of magnitude. Reaching the 260 M msg/s ceiling of our InfiniBand platform requires doorbell batching and queue parallelism, and both have resource costs: communication code can reduce GPU block residency even when unused, and all-to-all traffic loses 59% of its NIC message rate at about 3,000 active connections. The submission path alone therefore does not predict communication performance. Our experiment code and results are available at https://github.com/ParCoreLab/Dissecting-GPU-Communication-Experiments.

  • 4 authors
·
Sep 30

EdgeReasoning: Characterizing Reasoning LLM Deployment on Edge GPUs

Edge intelligence paradigm is increasingly demanded by the emerging autonomous systems, such as robotics. Beyond ensuring privacy-preserving operation and resilience in connectivity-limited environments, edge deployment offers significant energy and cost advantages over cloud-based solutions. However, deploying large language models (LLMs) for reasoning tasks on edge GPUs faces critical challenges from strict latency constraints and limited computational resources. To navigate these constraints, developers must balance multiple design factors - choosing reasoning versus non-reasoning architectures, selecting appropriate model sizes, allocating token budgets, and applying test-time scaling strategies - to meet target latency and optimize accuracy. Yet guidance on optimal combinations of these variables remains scarce. In this work, we present EdgeReasoning, a comprehensive study characterizing the deployment of reasoning LLMs on edge GPUs. We systematically quantify latency-accuracy tradeoffs across various LLM architectures and model sizes. We systematically evaluate prompt-based and model-tuning-based techniques for reducing reasoning token length while maintaining performance quality. We further profile test-time scaling methods with varying degrees of parallelism to maximize accuracy under strict latency budgets. Through these analyses, EdgeReasoning maps the Pareto frontier of achievable accuracy-latency configurations, offering systematic guidance for optimal edge deployment of reasoning LLMs.

  • 2 authors
·
Oct 21, 2025

Federated Learning over 5G, WiFi, and Ethernet: Measurements and Evaluation

Federated Learning (FL) deployments using IoT devices is an area that is poised to significantly benefit from advances in NextG wireless. In this paper, we deploy a FL application using a 5G-NR Standalone (SA) testbed with open-source and Commercial Off-the-Shelf (COTS) components. The 5G testbed architecture consists of a network of resource-constrained edge devices, namely Raspberry Pi's, and a central server equipped with a Software Defined Radio (SDR) and running O-RAN software. Our testbed allows edge devices to communicate with the server using WiFi and Ethernet, instead of 5G. FL is deployed using the Flower FL framework, for which we developed a comprehensive instrumentation tool to collect and analyze diverse communications and machine learning performance metrics including: model aggregation time, downlink transmission time, training time, and uplink transmission time. Leveraging these measurements, we perform a comparative analysis of the FL application across three network interfaces: 5G, WiFi, and Ethernet. Our experimental results suggest that, on 5G, the uplink model transfer time is a significant factor in convergence time of FL. In particular, we find that the 5G uplink contributes to roughly 23% of the duration of one average communication round when using all edge devices in our testbed. When comparing the uplink time of the 5G testbed, we find that it is 33.3x higher than Ethernet and 17.8x higher than WiFi. Our results also suggest that 5G exacerbates the well-known straggler effect. For reproducibility, we have open-sourced our FL application, instrumentation tools, and testbed configuration.

  • 6 authors
·
Apr 6, 2025

A Reinforcement Learning Approach to Optimize Available Network Bandwidth Utilization

Efficient data transfers over high-speed, long-distance shared networks require proper utilization of available network bandwidth. Using parallel TCP streams enables an application to utilize network parallelism and can improve transfer throughput; however, finding the optimum number of parallel TCP streams is challenging due to nondeterministic background traffic sharing the same network. Additionally, the non-stationary, multi-objectiveness, and partially-observable nature of network signals in the host systems add extra complexity in finding the current network condition. In this work, we present a novel approach to finding the optimum number of parallel TCP streams using deep reinforcement learning (RL). We devise a learning-based algorithm capable of generalizing different network conditions and utilizing the available network bandwidth intelligently. Contrary to rule-based heuristics that do not generalize well in unknown network scenarios, our RL-based solution can dynamically discover and adapt the parallel TCP stream numbers to maximize the network bandwidth utilization without congesting the network and ensure fairness among contending transfers. We extensively evaluated our RL-based algorithm's performance, comparing it with several state-of-the-art online optimization algorithms. The results show that our RL-based algorithm can find near-optimal solutions 40% faster while achieving up to 15% higher throughput. We also show that, unlike a greedy algorithm, our devised RL-based algorithm can avoid network congestion and fairly share the available network resources among contending transfers.

  • 4 authors
·
Nov 30, 2022

Empowering Edge Agents: A Systematic Analysis of Edge-Cloud Collaboration in LLM Agent Execution

Edge-cloud collaboration combines the lower inference overhead and greater data locality of edge-side execution with the stronger capabilities of cloud-hosted models. However, as LLM agents increasingly operate in long-horizon scenarios, cloud participation becomes interleaved throughout execution rather than a one-shot decision for each query. Such interleaved participation introduces trajectory-level effects that remain insufficiently understood. To address this gap, we introduce EC2-Bench, a benchmark for evaluating edge-cloud collaboration in long-horizon agent execution. It provides executable digital-workspace agent tasks and a unified evaluation framework covering task performance, resource usage, and privacy exposure. Using this benchmark, we empirically study diverse forms of edge-cloud collaboration. Our study reveals three findings. First, collaboration achieves a favorable balance among task performance, resource usage, and privacy exposure compared with edge-only and cloud-only execution. Second, as edge models become stronger, collaborative execution approaches cloud-only performance, and performance differences across strategies shrink, while privacy exposure remains strongly strategy-dependent. Third, stronger edge capability shifts preferred collaboration from externally controlled cloud participation and direct cloud execution toward more edge-controlled collaboration. Further analyses identify cloud-invocation decision-making and instruction following as important edge-side abilities for effective collaboration. These findings provide a systematic understanding of edge-cloud collaboration in long-horizon agent execution and insights for designing future edge agents that effectively collaborate with cloud models. Code and resources are available at https://github.com/OpenBMB/EC2-Bench.

Challenging the Need for Packet Spraying in Large-Scale Distributed Training

Large-scale distributed training in production datacenters constitutes a challenging workload bottlenecked by network communication. In response, both major industry players (e.g., Ultra Ethernet Consortium) and parts of academia have surprisingly, and almost unanimously, agreed that packet spraying is necessary to improve the performance of large-scale distributed training workloads. In this paper, we challenge this prevailing belief and pose the question: How close can a singlepath transport approach an optimal multipath transport? We demonstrate that singlepath transport (from a NIC's perspective) is sufficient and can perform nearly as well as an ideal multipath transport with packet spraying, particularly in the context of distributed training in leaf-spine topologies. Our assertion is based on four key observations about workloads driven by collective communication patterns: (i) flows within a collective start almost simultaneously, (ii) flow sizes are nearly equal, (iii) the completion time of a collective is more crucial than individual flow completion times, and (iv) flows can be split upon arrival. We analytically prove that singlepath transport, using minimal flow splitting (at the application layer), is equivalent to an ideal multipath transport with packet spraying in terms of maximum congestion. Our preliminary evaluations support our claims. This paper suggests an alternative agenda for developing next-generation transport protocols tailored for large-scale distributed training.

  • 3 authors
·
Jun 29, 2024

QEIL v2: Heterogeneous Computing for Edge Intelligence via Roofline-Derived Pareto-Optimal Energy Modeling and Multi-Objective Orchestration

Deploying large language models (LLMs) on heterogeneous edge devices demands frameworks that jointly optimize energy efficiency, inference quality, and reliability. Our prior QEIL v1 (Kumar & Jha, 2026) achieved 4.82x IPW improvement but relied on static efficiency factors, greedy optimization, and unverified candidate selection. QEIL v2 replaces every static heuristic with physics-grounded, runtime-adaptive models. We introduce three device-workload metrics: DASI (roofline-derived compute utilization), CPQ (memory pressure from allocation theory), and Phi (thermal yield from CMOS leakage physics), forming a unified energy equation with every coefficient traceable to semiconductor physics. For optimization, PGSAM (Pareto-Guided Simulated Annealing with Momentum) simultaneously minimizes energy, latency, and device underutilization. At inference time, the EAC/ARDE selection cascade with CSVET early stopping provides progressive verification among repeated samples. Evaluated on WikiText-103, GSM8K, and ARC-Challenge across seven model families (125M-8B parameters, including one pre-quantized variant), QEIL v2 achieves 75.7% pass@k at 63.8W (IPW=0.9749), a 2.86x improvement over standard inference. When applied to a 4-bit Llama-3.1-8B, QEIL v2's physics-grounded routing achieves IPW=1.024 at 54.8W -- the first edge orchestration system to surpass the IPW=1.0 empirical reference mark, with the gain attributable entirely to QEIL v2's workload-adaptive device allocation on a model with reduced memory bandwidth requirements. Total energy drops 75.6% vs. standard with 38.3% latency reduction, zero thermal throttling, and 100% fault recovery across all benchmarks and model families.

  • 2 authors
·
Apr 4 2

AI-based Resource Allocation: Reinforcement Learning for Adaptive Auto-scaling in Serverless Environments

Serverless computing has emerged as a compelling new paradigm of cloud computing models in recent years. It promises the user services at large scale and low cost while eliminating the need for infrastructure management. On cloud provider side, flexible resource management is required to meet fluctuating demand. It can be enabled through automated provisioning and deprovisioning of resources. A common approach among both commercial and open source serverless computing platforms is workload-based auto-scaling, where a designated algorithm scales instances according to the number of incoming requests. In the recently evolving serverless framework Knative a request-based policy is proposed, where the algorithm scales resources by a configured maximum number of requests that can be processed in parallel per instance, the so-called concurrency. As we show in a baseline experiment, this predefined concurrency level can strongly influence the performance of a serverless application. However, identifying the concurrency configuration that yields the highest possible quality of service is a challenging task due to various factors, e.g. varying workload and complex infrastructure characteristics, influencing throughput and latency. While there has been considerable research into intelligent techniques for optimizing auto-scaling for virtual machine provisioning, this topic has not yet been discussed in the area of serverless computing. For this reason, we investigate the applicability of a reinforcement learning approach, which has been proven on dynamic virtual machine provisioning, to request-based auto-scaling in a serverless framework. Our results show that within a limited number of iterations our proposed model learns an effective scaling policy per workload, improving the performance compared to the default auto-scaling configuration.

  • 3 authors
·
May 28, 2020

Efficient Deep Neural Networks

The success of deep neural networks (DNNs) is attributable to three factors: increased compute capacity, more complex models, and more data. These factors, however, are not always present, especially for edge applications such as autonomous driving, augmented reality, and internet-of-things. Training DNNs requires a large amount of data, which is difficult to obtain. Edge devices such as mobile phones have limited compute capacity, and therefore, require specialized and efficient DNNs. However, due to the enormous design space and prohibitive training costs, designing efficient DNNs for different target devices is challenging. So the question is, with limited data, compute capacity, and model complexity, can we still successfully apply deep neural networks? This dissertation focuses on the above problems and improving the efficiency of deep neural networks at four levels. Model efficiency: we designed neural networks for various computer vision tasks and achieved more than 10x faster speed and lower energy. Data efficiency: we developed an advanced tool that enables 6.2x faster annotation of a LiDAR point cloud. We also leveraged domain adaptation to utilize simulated data, bypassing the need for real data. Hardware efficiency: we co-designed neural networks and hardware accelerators and achieved 11.6x faster inference. Design efficiency: the process of finding the optimal neural networks is time-consuming. Our automated neural architecture search algorithms discovered, using 421x lower computational cost than previous search methods, models with state-of-the-art accuracy and efficiency.

  • 1 authors
·
Aug 20, 2019

EdgeKernelBench: Unified LLM-Driven Kernel Generation for Edge Backends

Recent works show that LLMs can generate kernels with strong performance on server GPUs. Edge deployment presents distinct challenges because the hardware is heterogeneous, the software stacks are fragmented, and the resource budgets are tight. LLM kernel generation across diverse edge backends has yet to be studied systematically. We introduce EdgeKernelBench, which combines a unified IR deployment framework with a hierarchical benchmark for edge workloads. The unified IR captures reusable computation, scheduling, and memory decisions and connects to each target backend through a compiler interface. The benchmark spans progressively larger program scopes, from individual operators to compact model graphs, across representative edge application domains. We instantiate the design with TVM as a reference compiler and validate it across heterogeneous edge backends. With a single generation attempt, the best model achieves 64.5% Correct@1 but only 25.5% Fast@1.0. This gap shows that functional correctness does not consistently translate into performance gains. We therefore introduce the Layered Edge Kernel Agent (LEKA), which organizes optimization through a layered IR. On the agent evaluation subset, LEKA achieves 43.5% Fast@1.0, compared with 13.0% for direct generation and 26.1% for Claude Code. LEKA and Claude Code use the same base model and optimization budget. Together, EdgeKernelBench and LEKA support unified evaluation and layered optimization of kernels generated by LLMs across edge backends.

Equifinality in Mixture of Experts: Routing Topology Does Not Determine Language Modeling Quality

Sparse Mixture-of-Experts (MoE) architectures employ increasingly sophisticated routing mechanisms -- learned routers, multi-hop trajectories, token-dependent gating. We ask: does routing topology actually determine language modeling quality? We build a geometric MoE (ST-MoE) using cosine-similarity routing against learned centroids in a low-dimensional space (d_{space} = 64), requiring 80% fewer routing parameters than standard linear routers. Through 62 controlled experiments on WikiText-103 at 76--84M parameters trained to convergence (50K steps, 1.64B tokens), we find that routing topology does not determine asymptotic perplexity (PPL): five cosine-routing variants are statistically equivalent within a 1-PPL margin (Two One-Sided Tests [TOST], p < 0.05 for all 10 pairwise comparisons; 15 runs across 3 seeds, observed range 33.93--34.72). The finding extends to hash, random-fixed, and top-1 routing (single-seed; graceful 1.1--2.2 PPL degradation) and replicates on OpenWebText (0.03 PPL gap, 6 runs, 3 seeds each). A standard linear router with 5.3times more routing parameters reaches PPL 32.76, but iso-parameter cosine routing closes 67% of this gap -- the true mechanism advantage is sim1.2%. The mechanistic explanation is convergent redundancy: multi-hop updates are collinear (cos(Δh_0, Δh_1) = 0.805), implementing magnitude amplification rather than compositional reasoning; a single learnable scalar replicates multi-hop performance. As a practical payoff, zero-shot relative-norm halting saves 25% of MoE FLOPs at +0.12% PPL. Expert-level specialization and causal controllability -- which coexist with topology-level equifinality -- are explored in a companion paper.

  • 2 authors
·
Apr 14

GraphVite: A High-Performance CPU-GPU Hybrid System for Node Embedding

Learning continuous representations of nodes is attracting growing interest in both academia and industry recently, due to their simplicity and effectiveness in a variety of applications. Most of existing node embedding algorithms and systems are capable of processing networks with hundreds of thousands or a few millions of nodes. However, how to scale them to networks that have tens of millions or even hundreds of millions of nodes remains a challenging problem. In this paper, we propose GraphVite, a high-performance CPU-GPU hybrid system for training node embeddings, by co-optimizing the algorithm and the system. On the CPU end, augmented edge samples are parallelly generated by random walks in an online fashion on the network, and serve as the training data. On the GPU end, a novel parallel negative sampling is proposed to leverage multiple GPUs to train node embeddings simultaneously, without much data transfer and synchronization. Moreover, an efficient collaboration strategy is proposed to further reduce the synchronization cost between CPUs and GPUs. Experiments on multiple real-world networks show that GraphVite is super efficient. It takes only about one minute for a network with 1 million nodes and 5 million edges on a single machine with 4 GPUs, and takes around 20 hours for a network with 66 million nodes and 1.8 billion edges. Compared to the current fastest system, GraphVite is about 50 times faster without any sacrifice on performance.

  • 4 authors
·
Mar 2, 2019

SAGA: Workflow-Atomic Scheduling for AI Agent Inference on GPU Clusters

AI agents execute tens to hundreds of chained LLM calls per task, yet GPU schedulers treat each call as independent, discarding gigabytes of intermediate state between steps and inflating end-to-end latency by 3-8x. We argue that this request-level abstraction is fundamentally mismatched to compound AI workloads, and propose a shift to program-level scheduling: treating the entire agent workflow (not individual inference calls) as the first-class schedulable unit. We present SAGA, a distributed scheduler that implements this abstraction through three mechanisms: (1) Agent Execution Graphs that capture workflow structure to predict KV cache reuse across tool-call boundaries, achieving within 1.31x of Bélády's optimal offline policy; (2) session-affinity batching with work stealing that co-locates correlated requests while maintaining global load balance; and (3) Agent Fair Share, a task-completion-time fairness metric with provable bounded-deviation guarantees. On a 64-GPU cluster serving SWE-bench coding agents and WebArena browser tasks, SAGA reduces task completion time by 1.64x (geometric mean, p < 0.001) over vLLM v0.15.1 with prefix caching and affinity routing, while improving GPU memory utilization by 1.22x and achieving 99.2% SLO attainment under multi-tenant interference. These latency gains come at a quantified cost: approximately 30% lower peak throughput than throughput-optimal batch scheduling, a tradeoff appropriate for the latency-sensitive interactive deployments that dominate compound AI usage. Our results demonstrate that workflow-aware scheduling is essential for efficient compound AI serving.

  • 3 authors
·
Apr 30

MST-compression: Compressing and Accelerating Binary Neural Networks with Minimum Spanning Tree

Binary neural networks (BNNs) have been widely adopted to reduce the computational cost and memory storage on edge-computing devices by using one-bit representation for activations and weights. However, as neural networks become wider/deeper to improve accuracy and meet practical requirements, the computational burden remains a significant challenge even on the binary version. To address these issues, this paper proposes a novel method called Minimum Spanning Tree (MST) compression that learns to compress and accelerate BNNs. The proposed architecture leverages an observation from previous works that an output channel in a binary convolution can be computed using another output channel and XNOR operations with weights that differ from the weights of the reused channel. We first construct a fully connected graph with vertices corresponding to output channels, where the distance between two vertices is the number of different values between the weight sets used for these outputs. Then, the MST of the graph with the minimum depth is proposed to reorder output calculations, aiming to reduce computational cost and latency. Moreover, we propose a new learning algorithm to reduce the total MST distance during training. Experimental results on benchmark models demonstrate that our method achieves significant compression ratios with negligible accuracy drops, making it a promising approach for resource-constrained edge-computing devices.

  • 5 authors
·
Aug 25, 2023

TPI-LLM: Serving 70B-scale LLMs Efficiently on Low-resource Edge Devices

Large model inference is shifting from cloud to edge due to concerns about the privacy of user interaction data. However, edge devices often struggle with limited computing power, memory, and bandwidth, requiring collaboration across multiple devices to run and speed up LLM inference. Pipeline parallelism, the mainstream solution, is inefficient for single-user scenarios, while tensor parallelism struggles with frequent communications. In this paper, we argue that tensor parallelism can be more effective than pipeline on low-resource devices, and present a compute- and memory-efficient tensor parallel inference system, named TPI-LLM, to serve 70B-scale models. TPI-LLM keeps sensitive raw data local in the users' devices and introduces a sliding window memory scheduler to dynamically manage layer weights during inference, with disk I/O latency overlapped with the computation and communication. This allows larger models to run smoothly on memory-limited devices. We analyze the communication bottleneck and find that link latency, not bandwidth, emerges as the main issue, so a star-based allreduce algorithm is implemented. Through extensive experiments on both emulated and real testbeds, TPI-LLM demonstrated over 80% less time-to-first-token and token latency compared to Accelerate, and over 90% compared to Transformers and Galaxy, while cutting the peak memory footprint of Llama 2-70B by 90%, requiring only 3.1 GB of memory for 70B-scale models.

  • 4 authors
·
Oct 1, 2024 8

Edge-MoE: Memory-Efficient Multi-Task Vision Transformer Architecture with Task-level Sparsity via Mixture-of-Experts

Computer vision researchers are embracing two promising paradigms: Vision Transformers (ViTs) and Multi-task Learning (MTL), which both show great performance but are computation-intensive, given the quadratic complexity of self-attention in ViT and the need to activate an entire large MTL model for one task. M^3ViT is the latest multi-task ViT model that introduces mixture-of-experts (MoE), where only a small portion of subnetworks ("experts") are sparsely and dynamically activated based on the current task. M^3ViT achieves better accuracy and over 80% computation reduction but leaves challenges for efficient deployment on FPGA. Our work, dubbed Edge-MoE, solves the challenges to introduce the first end-to-end FPGA accelerator for multi-task ViT with a collection of architectural innovations, including (1) a novel reordering mechanism for self-attention, which requires only constant bandwidth regardless of the target parallelism; (2) a fast single-pass softmax approximation; (3) an accurate and low-cost GELU approximation; (4) a unified and flexible computing unit that is shared by almost all computational layers to maximally reduce resource usage; and (5) uniquely for M^3ViT, a novel patch reordering method to eliminate memory access overhead. Edge-MoE achieves 2.24x and 4.90x better energy efficiency comparing with GPU and CPU, respectively. A real-time video demonstration is available online, along with our open-source code written using High-Level Synthesis.

  • 5 authors
·
May 29, 2023

AI Flow at the Network Edge

Recent advancements in large language models (LLMs) and their multimodal variants have led to remarkable progress across various domains, demonstrating impressive capabilities and unprecedented potential. In the era of ubiquitous connectivity, leveraging communication networks to distribute intelligence is a transformative concept, envisioning AI-powered services accessible at the network edge. However, pushing large models from the cloud to resource-constrained environments faces critical challenges. Model inference on low-end devices leads to excessive latency and performance bottlenecks, while raw data transmission over limited bandwidth networks causes high communication overhead. This article presents AI Flow, a framework that streamlines the inference process by jointly leveraging the heterogeneous resources available across devices, edge nodes, and cloud servers, making intelligence flow across networks. To facilitate cooperation among multiple computational nodes, the proposed framework explores a paradigm shift in the design of communication network systems from transmitting information flow to intelligence flow, where the goal of communications is task-oriented and folded into the inference process. Experimental results demonstrate the effectiveness of the proposed framework through an image captioning use case, showcasing the ability to reduce response latency while maintaining high-quality captions. This article serves as a position paper for identifying the motivation, challenges, and principles of AI Flow.

  • 2 authors
·
Nov 19, 2024

Halley: A Predictive Control Plane for Optical AI Data Center Networks

A frontier AI model is trained in an AI data center, on tens of thousands of accelerators joined by a dedicated network, and every training step ends with all of them exchanging data at once. Between racks, that network is optical, and each of its four layers, from lasers to switches, runs a fixed or after-the-fact policy. Lasers sharing an enclosure, cooling, and power can fail together. At a fixed spare ratio, correlated failure provably caps a pool's availability however large it grows. In this paper, we present a comprehensive predictive control plane framework, called Halley, that reads each resource's next state and acts before the failure occurs. It has four components, each carrying a formal guarantee: LightReserve that sizes the laser pool to provide a coverage bound, FoldFit that schedules the switch within 11/9 of the optimal, ThermaLead that holds a microring with one-step-ahead control, and TriageGuard that protects the highest-risk modules first. Halley gives each layer a predictive controller that defers to the deployed policy when unsure. Composed from simulations at that point, effective goodput, the share of ideal throughput kept, rises from 65.2\% to 76.5\% if a window that exhausts its spares is lost. If only the dark channels' bandwidth is lost, it reaches 67.4\%. Per megawatt, that is up to 1.03--1.17 times the training; for the same training, up to 3.3--14.7\% less data center capacity. Halley's fallback circuits are formally verified and are shown to achieve close timing on a commercial FPGA, and pass a 130~nm signoff.

  • 2 authors
·
Nov 3 2

Cascadia: A Control-Plane-Free Alternative to Hyperconverged AI Infrastructure

We present Cascadia, a system for serving large language models on fleets of commodity Intel AIPCs using their CPU, integrated-GPU, and NPU resources. Every node embeds ingress, scheduling, and execution; inference requests require no dedicated routing control plane. Nodes join a libp2p QUIC mesh using CA-issued ed25519 admission certificates, gossip signed capabilities, exchange live load over direct peer streams, and route OpenAI-compatible requests to eligible peers. An operator-run certificate authority handles admission and fleet management outside the inference path. Three serving modes share one interface: whole-model execution on one node, load-balanced replicas, and pipeline-sharded chains using the compilation and speculative decoding mechanism of our companion paper. Optional KV-cache mobility reuses compatible conversation prefixes after a routing move, with cold recomputation on a miss. Signed response receipts and hash-chained logs support provenance and audit. A three-node Phi-3.5-mini NPU testbed delivered 3.10x the response throughput of its one-node configuration under ten concurrent requests; a separate four-node deployment recorded 4.06x the throughput of direct single-node serving. Paired latency observations, runtime measurements, and internal functional checks characterize the tested configurations. We compare Cascadia with IBM, Nutanix, VMware, and HPE platforms on deployment footprint, hardware requirements, scheduling, scaling, licensing, and trust, using vendor documentation. The paper repository provides benchmark scripts, curated measurements, and a claim-to-evidence map.

  • 4 authors
·
Sep 29

The Energy Cost of Artificial Intelligence Lifecycle in Communication Networks

Artificial Intelligence (AI) is being incorporated in several optimization, scheduling, orchestration as well as in native communication network functions. This paradigm shift results in increased energy consumption, however, quantifying the end-to-end energy consumption of adding intelligence to communication systems remains an open challenge since conventional energy consumption metrics focus on either communication, computation infrastructure, or model development. To address this, we propose a new metric, the Energy Cost of AI Lifecycle (eCAL) of an AI model in a system. eCAL captures the energy consumption throughout the development, deployment and utilization of an AI-model providing intelligence in a communication network by (i) analyzing the complexity of data collection and manipulation in individual components and (ii) deriving overall and per-bit energy consumption. We show that as a trained AI model is used more frequently for inference, its energy cost per inference decreases, since the fixed training energy is amortized over a growing number of inferences. For a simple case study we show that eCAL for 100 inferences is 2.73 times higher than for 1000 inferences. Additionally, we have developed a modular and extendable open-source simulation tool to enable researchers, practitioners, and engineers to calculate the end-to-end energy cost with various configurations and across various systems, ensuring adaptability to diverse use cases.

  • 5 authors
·
Nov 17, 2025 1

Modeling Performance of Data Collection Systems for High-Energy Physics

Exponential increases in scientific experimental data are outstripping the rate of progress in silicon technology. As a result, heterogeneous combinations of architectures and process or device technologies are increasingly important to meet the computing demands of future scientific experiments. However, the complexity of heterogeneous computing systems requires systematic modeling to understand performance. We present a model which addresses this need by framing key aspects of data collection pipelines and constraints, and combines them with the important vectors of technology that shape alternatives, computing metrics that allow complex alternatives to be compared. For instance, a data collection pipeline may be characterized by parameters such as sensor sampling rates, amount of data collected, and the overall relevancy of retrieved samples. Alternatives to this pipeline are enabled by hardware development vectors including advancing CMOS, GPUs, neuromorphic computing, and edge computing. By calculating metrics for each alternative such as overall F1 score, power, hardware cost, and energy expended per relevant sample, this model allows alternate data collection systems to be rigorously compared. To demonstrate this model's capability, we apply it to the CMS experiment (and planned HL-LHC upgrade) to evaluate and compare the application of novel technologies in the data acquisition system (DAQ). We demonstrate that improvements to early stages in the DAQ are highly beneficial, greatly reducing the resources required at later stages of processing (such as a 60% power reduction) and increasing the amount of relevant data retrieved from the experiment per unit power (improving from 0.065 to 0.31 samples/kJ) However, we predict further advances will be required in order to meet overall power and cost constraints for the DAQ.

  • 3 authors
·
Jun 27, 2024

GNNPipe: Scaling Deep GNN Training with Pipelined Model Parallelism

Communication is a key bottleneck for distributed graph neural network (GNN) training. This paper proposes GNNPipe, a new approach that scales the distributed full-graph deep GNN training. Being the first to use layer-level model parallelism for GNN training, GNNPipe partitions GNN layers among GPUs, each device performs the computation for a disjoint subset of consecutive GNN layers on the whole graph. Compared to graph parallelism with each GPU handling a graph partition, GNNPipe reduces the communication volume by a factor of the number of GNN layers. GNNPipe overcomes the unique challenges for pipelined layer-level model parallelism on the whole graph by partitioning it into dependent chunks, allowing the use of historical vertex embeddings, and applying specific training techniques to ensure convergence. We also propose a hybrid approach by combining GNNPipe with graph parallelism to handle large graphs, achieve better computer resource utilization and ensure model convergence. We build a general GNN training system supporting all three parallelism setting. Extensive experiments show that our method reduces the per-epoch training time by up to 2.45x (on average 1.58x) and reduces the communication volume and overhead by up to 22.89x and 27.21x (on average 8.69x and 11.60x), respectively, while achieving a comparable level of model accuracy and convergence speed compared to graph parallelism.

  • 3 authors
·
Aug 19, 2023

Architecture-Aware LLM Inference Optimization on AMD Instinct GPUs: A Comprehensive Benchmark and Deployment Study

We present a cross-architecture evaluation of production LLM inference on AMD Instinct MI325X GPUs, benchmarking four models spanning 235B to 1 trillion parameters across three architectural families (MoE+MLA, Dense+GQA, MoE+GQA) on an 8-GPU cluster with 2TB aggregate HBM3e using vLLM v0.14.1. Our results demonstrate that architecture-aware optimization is essential: MLA models require block size 1 and cannot use KV cache offloading, while GQA models benefit from both. The AMD AITER runtime is required for competitive MLA inference throughput and must be selectively disabled for architectures with incompatible attention head configurations. A controlled AITER ablation on Llama-3.1-405B (n=5 per condition) reveals a modest 3-5% throughput benefit at high concurrency but 2-16x higher measurement variability, confirming that AITER's large speedups target MoE/MLA kernels specifically. Under text-only workloads, Llama-405B and DeepSeek V3.2 achieve comparable peak throughput (15,944 and 15,343 tok/s) despite an order-of-magnitude difference in active parameters. Under vision workloads, Qwen3-VL-235B reaches 47,873 tok/s, 6.5x higher than Kimi-K2.5 (7,327 tok/s). Active parameter count per token is associated with inference throughput, though confounded by differences in quantization, AITER acceleration, and tensor parallelism. All four models exhibit a common throughput saturation point consistent with a memory-bandwidth bottleneck (~500 concurrent for short sequences, ~100-200 for longer sequences). All models maintain 100% HTTP-level success rates through 1,000 concurrent users, processing 18.9 million tokens across 17,406 requests without failures.

  • 1 authors
·
Feb 27

GraphRouter: A Graph-based Router for LLM Selections

The rapidly growing number and variety of Large Language Models (LLMs) present significant challenges in efficiently selecting the appropriate LLM for a given query, especially considering the trade-offs between performance and computational cost. Current LLM selection methods often struggle to generalize across new LLMs and different tasks because of their limited ability to leverage contextual interactions among tasks, queries, and LLMs, as well as their dependence on a transductive learning framework. To address these shortcomings, we introduce a novel inductive graph framework, named as GraphRouter, which fully utilizes the contextual information among tasks, queries, and LLMs to enhance the LLM selection process. GraphRouter constructs a heterogeneous graph comprising task, query, and LLM nodes, with interactions represented as edges, which efficiently captures the contextual information between the query's requirements and the LLM's capabilities. Through an innovative edge prediction mechanism, GraphRouter is able to predict attributes (the effect and cost of LLM response) of potential edges, allowing for optimized recommendations that adapt to both existing and newly introduced LLMs without requiring retraining. Comprehensive experiments across three distinct effect-cost weight scenarios have shown that GraphRouter substantially surpasses existing routers, delivering a minimum performance improvement of 12.3%. In addition, it achieves enhanced generalization across new LLMs settings and supports diverse tasks with at least a 9.5% boost in effect and a significant reduction in computational demands. This work endeavors to apply a graph-based approach for the contextual and adaptive selection of LLMs, offering insights for real-world applications. Our codes for GraphRouter is released at https://github.com/ulab-uiuc/GraphRouter.

  • 3 authors
·
Oct 4, 2024

Beyond Inference: Performance Analysis of DNN Server Overheads for Computer Vision

Deep neural network (DNN) inference has become an important part of many data-center workloads. This has prompted focused efforts to design ever-faster deep learning accelerators such as GPUs and TPUs. However, an end-to-end DNN-based vision application contains more than just DNN inference, including input decompression, resizing, sampling, normalization, and data transfer. In this paper, we perform a thorough evaluation of computer vision inference requests performed on a throughput-optimized serving system. We quantify the performance impact of server overheads such as data movement, preprocessing, and message brokers between two DNNs producing outputs at different rates. Our empirical analysis encompasses many computer vision tasks including image classification, segmentation, detection, depth-estimation, and more complex processing pipelines with multiple DNNs. Our results consistently demonstrate that end-to-end application performance can easily be dominated by data processing and data movement functions (up to 56% of end-to-end latency in a medium-sized image, and sim 80% impact on system throughput in a large image), even though these functions have been conventionally overlooked in deep learning system design. Our work identifies important performance bottlenecks in different application scenarios, achieves 2.25times better throughput compared to prior work, and paves the way for more holistic deep learning system design.

  • 4 authors
·
Mar 1, 2024

RouteBalance: Fused Model Routing and Load Balancing for Heterogeneous LLM Serving

Heterogeneous LLM serving stacks split scheduling into two layers that optimize in isolation: model routers pick a model from quality and cost signals while ignoring instance load, and serving load balancers optimize queues while ignoring quality. We present RouteBalance, a serving-aware scheduling layer that fuses both into a single online assignment over concrete model instances, jointly trading off quality, latency, and cost. A batched in-process predictor stack and dead-reckoned instance state keep the joint decision cheap on the request hot path (approx32 ms at 12 req/s). On a 13-instance, 28-GPU heterogeneous cluster serving four model sizes, a single deployed RouteBalance stack traces the upper region of the three-way quality-cost-throughput frontier. Sweeping one weight vector reaches both the highest routing-decision quality (DeepEval 0.419, +0.013 over the strongest baseline, 95% CI [{+}0.005,{+}0.022]; the ordering holds when a second judge re-scores the actually served text) and, at its cost-priority corner, per-request cost that ties the cheapest baseline. With router engineering equalized against concurrent-scoring baseline variants we build, its balanced preset serves at 2.8 s and 30 req/s, leading 2.6 to 4.1times ahead of enhanced BEST-Route at high load. (Deploying those routers as published, one serial scoring call per request, makes them collapse 23times under load, a deployment-architecture effect we isolate separately, not the routing result.) A four-arm isolation shows the benefit follows from pricing latency at model-selection time; the learned predictors contribute calibration and SLO headroom rather than the headline frontier. Code: https://github.com/AKafakA/route-balance

  • 2 authors
·
Jun 15

Scaling Large Language Model Training on Frontier with Low-Bandwidth Partitioning

Scaling up Large Language Model(LLM) training involves fitting a tremendous amount of training parameters across a limited number of workers. However, methods like ZeRO-3 that drastically reduce GPU memory pressure often incur heavy communication to ensure global synchronization and consistency. Established efforts such as ZeRO++ use secondary partitions to avoid inter-node communications, given that intra-node GPU-GPU transfer generally has more bandwidth and lower latency than inter-node connections. However, as more capable infrastructure like Frontier, equipped with AMD GPUs, emerged with impressive computing capability, there is a need for investigations on the hardware topology and to develop targeted strategies to improve training efficiency. In this work, we propose a collection of communication and optimization strategies for ZeRO++ to reduce communication costs and improve memory utilization. In this paper, we propose a 3-level hierarchical partitioning specifically for the current Top-1 supercomputing cluster, Frontier, which aims at leveraging various bandwidths across layers of communications (GCD-GCD, GPU-GPU, and inter-node) to reduce communication overhead. For a 20B GPT model, we observe a 1.71x increase in TFLOPS per GPU when compared with ZeRO++ up to 384 GCDs and a scaling efficiency of 0.94 for up to 384 GCDs. To the best of our knowledge, our work is also the first effort to efficiently optimize LLM workloads on Frontier AMD GPUs.

  • 7 authors
·
Jan 7, 2025

Replacing Large Language Models with Jev Decision Models for Low-Latency Edge Service Orchestration

Natural-language service requests can require a language-model decision before execution starts, consuming part of the request's latency budget. We integrate Jev's decision-oriented application programming interface (API) into edge service orchestration to reduce this overhead while retaining service completion. The integration extracts four to eight bounded intent fields and applies a shared validator, admission policy, and scheduler, accounting for decision waiting throughout the request timeline. We compare Jev, two self-hosted decision models, and three hosted large language models (LLMs) on 8,280 verified requests and on a live admission path with modeled execution and a real optical character recognition service. Across 33 test conditions, Jev reduces median decision latency by 22.7-64.5% relative to the fastest LLM. This latency barely moves with input size, contract width, or catalog size. On four-field contracts, Jev's API fees per correct decision are 59.7-80.9% lower at a cost of a few exact-match points, while wide contracts mark the limit of the substitution. Receiving the service catalog with each request, Jev names unseen services as accurately as known ones. On the live admission path, Jev keeps 0.91-0.95 of requests exact and on time at loads where the LLMs fall below 0.1. Since caching repeated descriptions gives the interpreters nearly the same latency, Jev's gain lies in fresh decisions. These results support decision-model substitution for latency-bound admission on bounded contracts.

EdgeMoE: Fast On-Device Inference of MoE-based Large Language Models

Large Language Models (LLMs) such as GPTs and LLaMa have ushered in a revolution in machine intelligence, owing to their exceptional capabilities in a wide range of machine learning tasks. However, the transition of LLMs from data centers to edge devices presents a set of challenges and opportunities. While this shift can enhance privacy and availability, it is hampered by the enormous parameter sizes of these models, leading to impractical runtime costs. In light of these considerations, we introduce EdgeMoE, the first on-device inference engine tailored for mixture-of-expert (MoE) LLMs, a popular variant of sparse LLMs that exhibit nearly constant computational complexity as their parameter size scales. EdgeMoE achieves both memory and computational efficiency by strategically partitioning the model across the storage hierarchy. Specifically, non-expert weights are stored in the device's memory, while expert weights are kept in external storage and are fetched into memory only when they are activated. This design is underpinned by a crucial insight that expert weights, though voluminous, are infrequently accessed due to sparse activation patterns. To further mitigate the overhead associated with expert I/O swapping, EdgeMoE incorporates two innovative techniques: (1) Expert-wise bitwidth adaptation: This method reduces the size of expert weights with an acceptable level of accuracy loss. (2) Expert management: It predicts the experts that will be activated in advance and preloads them into the compute-I/O pipeline, thus further optimizing the process. In empirical evaluations conducted on well-established MoE LLMs and various edge devices, EdgeMoE demonstrates substantial memory savings and performance improvements when compared to competitive baseline solutions.

  • 6 authors
·
Aug 28, 2023

Load Testing for Machine Learning Model Serving Systems at Scale

Machine learning (ML) model serving has become a dominant consumer of GPU infrastructure, yet capacity planning in these systems remains largely ad hoc. Under-provisioning leads to service-level objective (SLO) violations and production incidents, while over-provisioning results in substantial resource waste. This paper presents \sys, an industrial load testing framework for ML serving systems that systematically estimates serving capacity through an adaptive, feedback-driven search strategy. The approach leverages real-time performance signals, incorporating dampening, spike tolerance, and convergence detection to efficiently identify maximum sustainable throughput under SLO constraints. We evaluate \sys through a longitudinal analysis of 14 industrial case studies spanning four ML architecture classes: recommendation, ranking, vision, and NLP. This study demonstrates that systematic load testing leads to substantial improvements in GPU resource efficiency and operational reliability. Prior to adopting \sys, a significant fraction of model launches were under-provisioned, resulting in recurring incidents; these issues were substantially reduced after deployment. Our results show that ML-specific design decisions are critical to accurate capacity estimation: workload calibration using recorded traffic reduces estimation error from approximately 30\% to 2--6\%, while proper warmup handling yields a 22.2\% improvement in accuracy. Further analysis reveals key factors influencing prediction error, including model size and co-location effects. This paper distills six lessons and derive architectural guidelines for ML load testing, offering actionable insights for building reliable and efficient ML serving systems.

  • 7 authors
·
Jun 19

TerraceMoE: A Cost Model for Hierarchical MoE All-to-All Communication

Hierarchical two-hop dispatch can reduce slow-fabric traffic in expert-parallel Mixture-of-Experts training, but it adds a second collective and an arrival-side operator chain. We present a cost model for screening that trade at the communication-call level, bounded by validation gates that withdraw a capability in code when they fail rather than reporting a caveat. At a reference geometry with 16 groups of 8 ranks, q=3, H=2048, and 4096 tokens per rank, the corrected effective breakeven hierarchy ratio is 3.98 for the measured PyTorch arrival chain, 1.49 for a hypothetical fused target, and 1.10 at zero implementation overhead. These are ratio-only sensitivity results, not deployment predictions: platform A measures 1.03, platform B has no separated fast/slow measurement, and neither machine measured here reaches the hierarchical regime. Four communication-level corpora pass their gates; a drift probe and the step-level gate fail. The latter failure is enforced in code, so we make no training-throughput prediction. The enabling routing constraint fixes per-token fan-out and per-selected-group quota, while aggregate per-peer counts remain data-dependent. Its measured validation-loss cost is small but nonzero (+0.0034 nats); downstream equivalence is reported with incomplete estimator provenance and is therefore not independently reconstructible from the artifact. Code, calibration constants and the validation gates are at https://github.com/weich97/TerraceMoE-simulator.

  • 5 authors
·
Aug 27

Route Anything: A Study of Model and Policy Routing for General-Purpose AI Systems

Artificial general intelligence (AGI) requires a method that can understand, generate, reason, and act across diverse domains and modalities. Rather than relying on a single model to master every capability, a promising path toward AGI now is to orchestrate a heterogeneous ecosystem of specialized models, tools, and policies (candidates) into a unified AI system. At the heart of this vision lies a fundamental question: how can an AI system dynamically select and coordinate the most capable candidate for each task while balancing performance and computational cost? In this work, we present Route Anything, a unified framework for studying model and policy routing across general-purpose AI systems. We develop a unified theoretical foundation that characterizes optimal routing under quality--cost trade-offs and establishes how the information available to a router determines its attainable performance. To systematically investigate routing across diverse capabilities, we first construct an omni-modal trajectory matrix spanning 25 benchmarks across language understanding, image, video, and speech generation, coding and workplace agents, and robotic manipulation, comprising 374,401 scored runs from 452 candidate configurations. Building on this framework, we train and test different routers to investigate the potential of omni-modal model routing, the capabilities of learned routers, and the conditions under which routing improves efficiency. Our results reveal substantial opportunities for capability orchestration: per-input oracle routing outperforms the best fixed candidate by 5.4 points, and learned routers outperform it by 0.3 points across 16 benchmarks, by 2.1 points on video generation, and by 1.1 points on robot manipulation while using 24% less policy time. More importantly, routing raises efficiency by 8.82x on average compared with the reference model.

  • 7 authors
·
Nov 2 3

QuIVer: Rethinking ANN Graph Topology via Training-Free Binary Quantization

Approximate nearest neighbor (ANN) graph indices such as HNSW and Vamana construct their edge topology in full-precision or high-fidelity quantized metric spaces, relegating binary quantization (BQ) to a post-hoc distance estimator during search. This paper asks a different question: Can binary quantization define the graph topology itself -- and if so, under what conditions? We study this question through QuIVer (Quantized Index for Vector Retrieval), a training-free ANN graph index that performs Vamana edge selection, diversity pruning, and beam-search navigation entirely within a 2-bit Sign-Magnitude BQ metric space, accessing float32 vectors only for final reranking. Systematic evaluation on twelve million-scale datasets reveals a sharp applicability boundary: BQ-native topology is highly effective on cosine-native contrastive-learning embeddings (>=88% Recall@10 at ef=64 across five datasets, 384--3072 dimensions), moderately effective on multimodal CLIP data (71--78%), and empirically unsuitable for Euclidean-native or structureless distributions (<15%). Our results suggest an empirical "impossible triangle" between aggressive compression, high throughput, and universal data compatibility. The central contribution is not merely the system, but the boundary it reveals: falsifiable criteria for when industrial vector search systems can safely trade metric fidelity for compact BQ-native navigation. On compatible workloads, the system benefits are substantial: QuIVer's BQ-native hot path (<1.3 GB for 1M vectors) yields 2.5--5.5x higher multi-threaded throughput than DiskANN Rust and HNSW variants at matched recall, with 4.7x less hot memory and no codebook or rotation training (unlike PQ/OPQ/RaBitQ).

  • 3 authors
·
May 16

TokenRouter: Efficient Serving System for Token-Level LLM Routing

Large language model (LLM) routing distributes inference work across different models, advancing the cost-quality Pareto frontier of LLM serving. While coarse-grained routing at the session or query level has been widely adopted in production systems, recent algorithmic work shows that fine-grained token-level routing can yield substantial efficiency and quality gains. However, efficiently serving token-level routed inference poses significant challenges to existing systems. Built on single-LLM assumptions, current systems suffer from severe step desynchronization and frequent batch admission delays under token-level routing, and they also impose high implementation complexity on developers. To address these challenges, we design TokenRouter, an efficient and developer-friendly serving system for token-level routed LLM inference. TokenRouter follows the principle of request-centric programming, model-centric execution: developers describe routing logic from the perspective of a single request, while the runtime launches a subserver for each LLM and dispatches requests asynchronously. Each subserver employs a delayed-batching scheduler, whose optimal hyperparameters are derived from a mathematical throughput model of the system. Across diverse routing algorithms, workloads, and model pairs, TokenRouter achieves 2.01-64.15x higher decoding throughput than existing systems, substantially advancing the serving efficiency of token-level LLM routing. Our code is available at https://github.com/thu-nics/TokenRouter.

A Topological Perspective on Demystifying GNN-Based Link Prediction Performance

Graph Neural Networks (GNNs) have shown great promise in learning node embeddings for link prediction (LP). While numerous studies aim to improve the overall LP performance of GNNs, none have explored its varying performance across different nodes and its underlying reasons. To this end, we aim to demystify which nodes will perform better from the perspective of their local topology. Despite the widespread belief that low-degree nodes exhibit poorer LP performance, our empirical findings provide nuances to this viewpoint and prompt us to propose a better metric, Topological Concentration (TC), based on the intersection of the local subgraph of each node with the ones of its neighbors. We empirically demonstrate that TC has a higher correlation with LP performance than other node-level topological metrics like degree and subgraph density, offering a better way to identify low-performing nodes than using cold-start. With TC, we discover a novel topological distribution shift issue in which newly joined neighbors of a node tend to become less interactive with that node's existing neighbors, compromising the generalizability of node embeddings for LP at testing time. To make the computation of TC scalable, We further propose Approximated Topological Concentration (ATC) and theoretically/empirically justify its efficacy in approximating TC and reducing the computation complexity. Given the positive correlation between node TC and its LP performance, we explore the potential of boosting LP performance via enhancing TC by re-weighting edges in the message-passing and discuss its effectiveness with limitations. Our code is publicly available at https://github.com/YuWVandy/Topo_LP_GNN.

  • 7 authors
·
Oct 6, 2023

Are We There Yet? A Measurement Study of Efficiency for LLM Applications on Mobile Devices

Recent advancements in large language models (LLMs) have prompted interest in deploying these models on mobile devices to enable new applications without relying on cloud connectivity. However, the efficiency constraints of deploying LLMs on resource-limited devices present significant challenges. In this paper, we conduct a comprehensive measurement study to evaluate the efficiency tradeoffs between mobile-based, edge-based, and cloud-based deployments for LLM applications. We implement AutoLife-Lite, a simplified LLM-based application that analyzes smartphone sensor data to infer user location and activity contexts. Our experiments reveal that: (1) Only small-size LLMs (<4B parameters) can run successfully on powerful mobile devices, though they exhibit quality limitations compared to larger models; (2) Model compression is effective in lower the hardware requirement, but may lead to significant performance degradation; (3) The latency to run LLMs on mobile devices with meaningful output is significant (>30 seconds), while cloud services demonstrate better time efficiency (<10 seconds); (4) Edge deployments offer intermediate tradeoffs between latency and model capabilities, with different results on CPU-based and GPU-based settings. These findings provide valuable insights for system designers on the current limitations and future directions for on-device LLM applications.

  • 2 authors
·
Mar 10, 2025

EDiS: Edge Disjoint Subgraph Sparsification Framework for Graph Neural Networks

Sparse GNN training reduces computation, but deciding which edges to keep can be costly. Reusing one sparse graph is cheap, but locks training to a fixed topology, while varying it across epochs can require repeated sampling or recomputation. We introduce EDiS (Edge-Disjoint Subgraph sparsification framework), which separates one-time structural extraction from per-epoch graph composition. EDiS decomposes the graph once into cacheable edge-disjoint subgraphs, then recombines them into graphs with edge-budget constraints across epochs and retention ratios without re-extracting structure. Our default construction uses feature-based scores and successive maximum score covering forests, while the same composition mechanism also supports alternative edge selection rules. We provide a combinatorial analysis of the per-epoch sampler, the composition step that draws a training graph from the cached decomposition. We show that, under the default covering-forest selector, the stored decomposition deterministically preserves high-score cut edges, and we derive a selector-agnostic conditional bound on high-score cut survival in composed training graphs. Across 19 homophilic, heterophilic, and large-scale node classification benchmarks against 17 baselines under the same edge budget, EDiS achieves the highest mean benchmark score (accuracy/ROC-AUC) and the lowest average rank and gap-to-best among ranked methods. Ablations show the clearest benefits of structural decomposition and epoch variation at tight edge budgets.

  • 10 authors
·
Oct 5 2

Slimmable Encoders for Flexible Split DNNs in Bandwidth and Resource Constrained IoT Systems

The execution of large deep neural networks (DNN) at mobile edge devices requires considerable consumption of critical resources, such as energy, while imposing demands on hardware capabilities. In approaches based on edge computing the execution of the models is offloaded to a compute-capable device positioned at the edge of 5G infrastructures. The main issue of the latter class of approaches is the need to transport information-rich signals over wireless links with limited and time-varying capacity. The recent split computing paradigm attempts to resolve this impasse by distributing the execution of DNN models across the layers of the systems to reduce the amount of data to be transmitted while imposing minimal computing load on mobile devices. In this context, we propose a novel split computing approach based on slimmable ensemble encoders. The key advantage of our design is the ability to adapt computational load and transmitted data size in real-time with minimal overhead and time. This is in contrast with existing approaches, where the same adaptation requires costly context switching and model loading. Moreover, our model outperforms existing solutions in terms of compression efficacy and execution time, especially in the context of weak mobile devices. We present a comprehensive comparison with the most advanced split computing solutions, as well as an experimental evaluation on GPU-less devices.

  • 4 authors
·
Jun 22, 2023

Adaptive Bridge: A Proxy-Based Decoupling Layer for Mitigating DDS Backpressure in ROS 2

In systems built on Robot Operating System 2 (ROS 2) and using Data Distribution Service (DDS), a single network-impaired or throttled subscriber on a RELIABLE topic can cause backpressure that degrades throughput and latency for all other subscribers, including safety-critical ones sharing the publisher, because the publisher's DDS writer can no longer accept new samples. We present Adaptive Bridge, a proxy-based layer that decouples critical subscribers from degraded or noncritical ones, thereby isolating the critical path through topic splitting and dynamic rate control. The proxy acts as a middleman and subscribes to the original topic and republishes the messages to two independent DDS writers: one RELIABLE writer for critical nodes and one BEST EFFORT writer for noncritical or degraded nodes, thus isolating the degraded nodes and safeguarding the publisher and critical nodes from backpressure. A probe-based classifier actively monitors subscriber health through sampling with hysteresis and adjusts subscriber rate limits in real time. We evaluate the system under a Gilbert-Elliott bursty wireless loss model using a reproducible Docker-based harness. The results show that using the Adaptive Bridge in our evaluation harness reduces the critical subscriber tail p95 latency from up to 15 s to 1.55 ms across all impairment severities while preserving the publisher's configured throughput.

Auriga: Harness-Governed LLM Agents for Effective Throughput Optimization in Execute-Order-Validate Permissioned Blockchains

Effective throughput, the product of raw throughput and transaction success rate, determines the useful capacity of Execute-Order-Validate blockchains such as Hyperledger Fabric. Most prior work either tunes configurations to raise raw throughput, requiring many costly redeployments, or controls conflicts to raise the success rate, repairing them only after execution with kernel modifications. The few joint approaches tune only a small set of parameters and still rely on kernel changes to resolve conflicts. To address these challenges, we present Auriga, a non-invasive framework that jointly optimizes both factors through sample-efficient LLM-guided configuration search and pre-execution conflict prevention. A harness-governed multi-agent architecture coordinates LLM agents for parameter exploration, saturation-aware evaluation, and experience consolidation, with the harness controlling tool and memory access and retaining termination authority. For transaction scheduling, an LLM extracts symbolic AST templates from smart contracts offline. At runtime, the scheduler predicts read-write sets without executing them and partitions transactions into conflict-free groups. Across three benchmarks and conflict rates up to 70%, Auriga improves effective throughput by up to 6.0 times over default Fabric and 2.0 times over the strongest baseline. The tuning agent also discovers undocumented parameter dependencies, and ablation studies show the independent contributions of both subsystems.

  • 6 authors
·
Nov 10