Daily Papers

Zero-shot waypoint navigation requires vision-language models to select, from the current first-person observation, a sequence of spatial actions that is feasible for the agent and reaches the goal, placing joint demands on the integrated spatial intelligence of today's foundation VLMs. Existing spatial-intelligence benchmarks primarily evaluate isolated judgments of relations, directions, or targets and therefore do not directly measure the integrated navigation ability required to combine target recognition, action-consequence assessment, distance estimation, and path planning. To fill this evaluation gap, we introduce EgoPathBench, a dataset and five-task benchmark for first-person waypoint decision-making. Each question presents an egocentric RGB image, a natural-language goal, and numbered visible waypoints; a model returns traversable candidates or an ordered route. Predictions are evaluated for candidate feasibility, adjacent-edge legality, and goal arrival under point-agent or embodied geometry. EgoPathBench contains 31,852 training, 1,345 validation, and 1,111 benchmark questions and retains at least one geometrically verified reference route for every route question. Across nine VLMs, the highest EgoPath Score is only 28.3. The top-ranked model reaches 35.9% success on Point Path, but only 2.9% and 4.0% on Embodied Path and Intent Path, respectively, showing that current models remain limited in forming complete, goal-consistent routes under embodiment constraints. Beyond the evaluation data, we release the corresponding training resource. Fine-tuning Qwen 3.5 4B on the released training split raises its EgoPath Score from 3.9 to 38.9 and improves all four reported evaluations across three external spatial benchmarks, with gains of 1.4--9.6 points.

Scaling generalist vision-language-action (VLA) policies is severely bottlenecked by the inherent heterogeneity of embodied data, which spans diverse robot morphologies, camera configurations, and low-level action spaces. Existing paradigms typically address this mismatch through explicit action retargeting, human-to-robot video synthesis, or dataset-specific adaptation branches, fundamentally hindering the joint learning of a unified policy. We introduce UCAG-P, a camera-centric unified action formulation that structurally aligns heterogeneous embodied datasets into a shared geometric action space. Rather than treating robot-specific commands as the shared policy target, UCAG-P represents manipulation through camera-observable anchor motion in image and camera-frame coordinates, treating robot arms, humanoids, and human hands as different embodiments of a common action schema. A geometry-conditioned action translator combines predicted motion with target-embodiment kinematics to produce executable controls. The resulting decoupled architecture allows a shared VLA policy to learn transferable manipulation geometry while retaining embodiment-specific controllability. UCAG-P is trained on 4.03K hours of robot and simulation data and 2.34K hours of human demonstrations. A single checkpoint reaches 98.3% on LIBERO, 88.7% and 89.2% on RoboTwin Easy and Hard, 82.0% zero-shot on LIBERO-Plus, and 62.0% on RoboCasa GR-1, without benchmark-specific fine-tuning.

Embodied agents exploring indoor environments require reliable semantic occupancy memory that persists across observations and revisits. Building such memory is challenging because each observation provides incomplete and uncertain geometric and semantic evidence. We introduce GEM-Occ, a Gaussian Evidence Memory framework that consolidates evidence accumulated over time into persistent semantic occupancy memory. Local predictions are converted into occupied semantic Gaussians and free-space ray evidence. Confidence- and visibility-aware causal updates integrate supporting observations, suppress occupancy contradicted by observed free space, and preserve previously observed structures through occlusion. A hierarchical memory organization supports continued mapping and efficient queries across connected indoor spaces. To evaluate this capability, we introduce HIOcc, a unified benchmark for embodied semantic occupancy memory. HIOcc establishes a shared semantic label space and evaluation framework spanning local prediction, room-level online mapping, and building-level mapping, while accommodating perspective and panoramic observations. Experiments on HIOcc demonstrate that GEM-Occ outperforms existing methods, enabling accurate semantic occupancy prediction and consistent online mapping across spatial scales with efficient memory usage and fast occupancy queries.

Vision-and-Language Navigation (VLN) suffers from the limited diversity and scale of training data, primarily constrained by the manual curation of existing simulators. To address this, we introduce RoomTour3D, a video-instruction dataset derived from web-based room tour videos that capture real-world indoor spaces and human walking demonstrations. Unlike existing VLN datasets, RoomTour3D leverages the scale and diversity of online videos to generate open-ended human walking trajectories and open-world navigable instructions. To compensate for the lack of navigation data in online videos, we perform 3D reconstruction and obtain 3D trajectories of walking paths augmented with additional information on the room types, object locations and 3D shape of surrounding scenes. Our dataset includes sim100K open-ended description-enriched trajectories with sim200K instructions, and 17K action-enriched trajectories from 1847 room tour environments. We demonstrate experimentally that RoomTour3D enables significant improvements across multiple VLN tasks including CVDN, SOON, R2R, and REVERIE. Moreover, RoomTour3D facilitates the development of trainable zero-shot VLN agents, showcasing the potential and challenges of advancing towards open-world navigation.

Embodied AI aims to develop intelligent systems with physical forms capable of perceiving, decision-making, acting, and learning in real-world environments, providing a promising way to Artificial General Intelligence (AGI). Despite decades of explorations, it remains challenging for embodied agents to achieve human-level intelligence for general-purpose tasks in open dynamic environments. Recent breakthroughs in large models have revolutionized embodied AI by enhancing perception, interaction, planning and learning. In this article, we provide a comprehensive survey on large model empowered embodied AI, focusing on autonomous decision-making and embodied learning. We investigate both hierarchical and end-to-end decision-making paradigms, detailing how large models enhance high-level planning, low-level execution, and feedback for hierarchical decision-making, and how large models enhance Vision-Language-Action (VLA) models for end-to-end decision making. For embodied learning, we introduce mainstream learning methodologies, elaborating on how large models enhance imitation learning and reinforcement learning in-depth. For the first time, we integrate world models into the survey of embodied AI, presenting their design methods and critical roles in enhancing decision-making and learning. Though solid advances have been achieved, challenges still exist, which are discussed at the end of this survey, potentially as the further research directions.

Omni-directional (360°) cameras provide embodied agents with a holistic view of their surroundings, making them suited for directional reasoning in tasks such as navigation and object search. Existing Vision Language Models (VLMs) project 360° observations to 2D equirectangular projection (ERP) images and process them using architectures designed for perspective images. However, they ignore the spherical nature of 360° observations, where each pixel represents a viewing direction relative to the agent. Consequently, their direction estimates often become inconsistent under camera view transformations caused by agent motion. This limitation is particularly critical for map-free navigation, where the agent must continuously estimate the target direction in its egocentric frame. We propose EAGOR, a training-free, geometry-aware framework for embodied 360° directional reasoning. Instead of predicting target directions as ERP image coordinates, EAGOR formulates directional reasoning as recursive Bayesian estimation directly on the sphere. It maintains a continuous belief over target directions and propagates it equivariantly under agent motion without training the backbone VLMs. To achieve this, we introduce the Spherical Harmonic Belief Field (SH-BF), whose spherical harmonic representation provides a globally defined, rotation-aware basis for directional estimation on the spherical manifold. This formulation eliminates ERP seam discontinuities, latitude distortions, and interpolation errors. We evaluate EAGOR on two benchmark datasets and real-world experiments with a legged robot across directional reasoning tasks. EAGOR consistently outperforms existing methods, achieving average relative gains of +34.4% and +45.6% on HOS and OSR-Bench, respectively, while improving navigation success by +14.6%, reducing step count by 17.7%, and lowering mean angular error by 24.5%.

For robots to robustly understand and interact with the physical world, it is highly beneficial to have a comprehensive representation - modelling geometry, physics, and visual observations - that informs perception, planning, and control algorithms. We propose a novel dual Gaussian-Particle representation that models the physical world while (i) enabling predictive simulation of future states and (ii) allowing online correction from visual observations in a dynamic world. Our representation comprises particles that capture the geometrical aspect of objects in the world and can be used alongside a particle-based physics system to anticipate physically plausible future states. Attached to these particles are 3D Gaussians that render images from any viewpoint through a splatting process thus capturing the visual state. By comparing the predicted and observed images, our approach generates visual forces that correct the particle positions while respecting known physical constraints. By integrating predictive physical modelling with continuous visually-derived corrections, our unified representation reasons about the present and future while synchronizing with reality. Our system runs in realtime at 30Hz using only 3 cameras. We validate our approach on 2D and 3D tracking tasks as well as photometric reconstruction quality. Videos are found at https://embodied-gaussians.github.io/.

High-quality 3D world models are pivotal for embodied intelligence and Artificial General Intelligence (AGI), underpinning applications such as AR/VR content creation and robotic navigation. Despite the established strong imaginative priors, current video foundation models lack explicit 3D grounding capabilities, thus being limited in both spatial consistency and their utility for downstream 3D reasoning tasks. In this work, we present FantasyWorld, a geometry-enhanced framework that augments frozen video foundation models with a trainable geometric branch, enabling joint modeling of video latents and an implicit 3D field in a single forward pass. Our approach introduces cross-branch supervision, where geometry cues guide video generation and video priors regularize 3D prediction, thus yielding consistent and generalizable 3D-aware video representations. Notably, the resulting latents from the geometric branch can potentially serve as versatile representations for downstream 3D tasks such as novel view synthesis and navigation, without requiring per-scene optimization or fine-tuning. Extensive experiments show that FantasyWorld effectively bridges video imagination and 3D perception, outperforming recent geometry-consistent baselines in multi-view coherence and style consistency. Ablation studies further confirm that these gains stem from the unified backbone and cross-branch information exchange.

Accurate 3D scene understanding is essential for embodied intelligence, with occupancy prediction emerging as a key task for reasoning about both objects and free space. Existing approaches largely rely on depth priors (e.g., DepthAnything) but make only limited use of 3D cues, restricting performance and generalization. Recently, visual geometry models such as VGGT have shown strong capability in providing rich 3D priors, but similar to monocular depth foundation models, they still operate at the level of visible surfaces rather than volumetric interiors, motivating us to explore how to more effectively leverage these increasingly powerful geometry priors for 3D occupancy prediction. We present GPOcc, a framework that leverages generalizable visual geometry priors (GPs) for monocular occupancy prediction. Our method extends surface points inward along camera rays to generate volumetric samples, which are represented as Gaussian primitives for probabilistic occupancy inference. To handle streaming input, we further design a training-free incremental update strategy that fuses per-frame Gaussians into a unified global representation. Experiments on Occ-ScanNet and EmbodiedOcc-ScanNet demonstrate significant gains: GPOcc improves mIoU by +9.99 in the monocular setting and +11.79 in the streaming setting over prior state of the art. Under the same depth prior, it achieves +6.73 mIoU while running 2.65times faster. These results highlight that GPOcc leverages geometry priors more effectively and efficiently. Code will be released at https://github.com/JuIvyy/GPOcc.

Achieving human-like reasoning in deep learning models for complex tasks in unknown environments remains a critical challenge in embodied intelligence. While advanced vision-language models (VLMs) excel in static scene understanding, their limitations in spatio-temporal reasoning and adaptation to dynamic, open-set tasks like task-oriented navigation and embodied question answering (EQA) persist due to inadequate modeling of fine-grained spatio-temporal cues and physical world comprehension. To address this, we propose VEME, a novel cross-modal alignment method that enhances generalization in unseen scenes by learning an ego-centric, experience-centered world model. Our framework integrates three key components: (1) a cross-modal alignment framework bridging objects, spatial representations, and visual semantics with spatio-temporal cues to enhance VLM in-context learning; (2) a dynamic, implicit cognitive map activated by world embedding to enable task-relevant geometric-semantic memory recall; and (3) an instruction-based navigation and reasoning framework leveraging embodied priors for long-term planning and efficient exploration. By embedding geometry-aware spatio-temporal episodic experiences, our method significantly improves reasoning and planning in dynamic environments. Experimental results on VSI-Bench and VLN-CE demonstrate 1%-3% accuracy and exploration efficiency improvement compared to traditional approaches.

Constructing 4D language fields is crucial for embodied AI, augmented/virtual reality, and 4D scene understanding, as they provide enriched semantic representations of dynamic environments and enable open-vocabulary querying in complex scenarios. However, existing approaches to 4D semantic field construction primarily rely on scene-specific Gaussian splatting, which requires per-scene optimization, exhibits limited generalization, and is difficult to scale to real-world applications. To address these limitations, we propose 4DLangVGGT, the first Transformer-based feed-forward unified framework for 4D language grounding, that jointly integrates geometric perception and language alignment within a single architecture. 4DLangVGGT has two key components: the 4D Visual Geometry Transformer, StreamVGGT, which captures spatio-temporal geometric representations of dynamic scenes; and the Semantic Bridging Decoder (SBD), which projects geometry-aware features into a language-aligned semantic space, thereby enhancing semantic interpretability while preserving structural fidelity. Unlike prior methods that depend on costly per-scene optimization, 4DLangVGGT can be jointly trained across multiple dynamic scenes and directly applied during inference, achieving both deployment efficiency and strong generalization. This design significantly improves the practicality of large-scale deployment and establishes a new paradigm for open-vocabulary 4D scene understanding. Experiments on HyperNeRF and Neu3D datasets demonstrate that our approach not only generalizes effectively but also achieves state-of-the-art performance, achieving up to 2% gains under per-scene training and 1% improvements under multi-scene training. Our code released in https://github.com/hustvl/4DLangVGGT

Egocentric visual query localization is vital for embodied AI and VR/AR, yet remains challenging due to camera motion, viewpoint changes, and appearance variations. We present EAGLE, a novel framework that leverages episodic appearance- and geometry-aware memory to achieve unified 2D-3D visual query localization in egocentric vision. Inspired by avian memory consolidation, EAGLE synergistically integrates segmentation guided by an appearance-aware meta-learning memory (AMM), with tracking driven by a geometry-aware localization memory (GLM). This memory consolidation mechanism, through structured appearance and geometry memory banks, stores high-confidence retrieval samples, effectively supporting both long- and short-term modeling of target appearance variations. This enables precise contour delineation with robust spatial discrimination, leading to significantly improved retrieval accuracy. Furthermore, by integrating the VQL-2D output with a visual geometry grounded Transformer (VGGT), we achieve a efficient unification of 2D and 3D tasks, enabling rapid and accurate back-projection into 3D space. Our method achieves state-ofthe-art performance on the Ego4D-VQ benchmark.

Recent World Action Models (WAMs) have demonstrated impressive capabilities in embodied decision-making. However, whether their effectiveness stems from explicit future imagination during inference or representation learning induced by predictive training remains an open question. Emerging evidence suggests the primary advantage lies in learning robust latent representations rather than generating future observations at test time. Nevertheless, existing WAMs mainly rely on RGB-based future prediction, which provides limited structural and spatial understanding of complex environments. To address this, we propose a structured world modeling framework that enhances latent representations through geometric and semantic supervision. Alongside future RGB prediction, our model introduces two auxiliary prediction branches for future geometry and semantic representations, enabling it to jointly capture scene dynamics, spatial geometry, and semantic context within a unified latent space. Crucially, our approach preserves efficient inference by avoiding explicit future rollout or video generation at test time. Extensive experiments show that incorporating structured world supervision consistently improves action prediction accuracy, scene understanding, and robustness under challenging embodied scenarios, highlighting its potential for advancing scalable and efficient WAMs.

Recent advances in multimodal foundation models, exemplified by GPT-6 Astra, raise the prospect of general-purpose embodied reasoning and planning. Using Internet videos for embodied pretraining calls for reliable physical-scale annotations. Yet visual geometry foundation models often recover scene structure and camera motion without reliable metric scale. We show that uncertain size priors of familiar objects can jointly constrain a reconstruction's shared scale. Building on this insight, we present UniMetric, a universal and training-free metric scale recovery framework for geometry foundation models, without additional sensors or task-specific metric supervision. Specifically, Metric Prior Acquisition elicits object height intervals from a vision-language model. Semantic-Geometric Alignment measures reconstructed object heights along the estimated support-surface normal in each frame and converts the priors into scale intervals. Global Scale Recovery reconciles these intervals through a convex objective, yielding a jointly feasible scale when they overlap and a unique compromise otherwise. The estimated sequence-level scale is applied uniformly to reconstructed points and camera translations. Controlled experiments with real VLM priors show that combining observations improves scale accuracy with exact relative object heights. To evaluate metric accuracy on GFM reconstructions without ground-truth scale alignment, we introduce MetricBench, covering twelve embodied, driving, and roadside subsets with sensor-derived ground truth. Across nine geometry foundation models, UniMetric reduces mean depth Abs Rel, reconstruction Chamfer distance, and trajectory error by 54.2%, 83.8%, and 65.6%, respectively, improving every model on all three tasks at the suite level. We release the UniMetric code and MetricBench data.

Developing embodied AI for intelligent surgical systems requires safe, controllable environments for continual learning and evaluation. However, safety regulations and operational constraints in operating rooms (ORs) limit embodied agents from freely perceiving and interacting in realistic settings. Digital twins provide high-fidelity, risk-free environments for exploration and training. How we may create photorealistic and dynamic digital representations of ORs that capture relevant spatial, visual, and behavioral complexity remains unclear. We introduce TwinOR, a framework for constructing photorealistic, dynamic digital twins of ORs for embodied AI research. The system reconstructs static geometry from pre-scan videos and continuously models human and equipment motion through multi-view perception of OR activities. The static and dynamic components are fused into an immersive 3D environment that supports controllable simulation and embodied exploration. The proposed framework reconstructs complete OR geometry with centimeter level accuracy while preserving dynamic interaction across surgical workflows, enabling realistic renderings and a virtual playground for embodied AI systems. In our experiments, TwinOR simulates stereo and monocular sensor streams for geometry understanding and visual localization tasks. Models such as FoundationStereo and ORB-SLAM3 on TwinOR-synthesized data achieve performance within their reported accuracy on real indoor datasets, demonstrating that TwinOR provides sensor-level realism sufficient for perception and localization challenges. By establishing a real-to-sim pipeline for constructing dynamic, photorealistic digital twins of OR environments, TwinOR enables the safe, scalable, and data-efficient development and benchmarking of embodied AI, ultimately accelerating the deployment of embodied AI from sim-to-real.

We introduce EgoSim, a closed-loop egocentric world simulator that generates spatially consistent interaction videos and persistently updates the underlying 3D scene state for continuous simulation. Existing egocentric simulators either lack explicit 3D grounding, causing structural drift under viewpoint changes, or treat the scene as static, failing to update world states across multi-stage interactions. EgoSim addresses both limitations by modeling 3D scenes as updatable world states. We generate embodiment interactions via a Geometry-action-aware Observation Simulation model, with spatial consistency from an Interaction-aware State Updating module. To overcome the critical data bottleneck posed by the difficulty in acquiring densely aligned scene-interaction training pairs, we design a scalable pipeline that extracts static point clouds, camera trajectories, and embodiment actions from in-the-wild large-scale monocular egocentric videos. We further introduce EgoCap, a capture system that enables low-cost real-world data collection with uncalibrated smartphones. Extensive experiments demonstrate that EgoSim significantly outperforms existing methods in terms of visual quality, spatial consistency, and generalization to complex scenes and in-the-wild dexterous interactions, while supporting cross-embodiment transfer to robotic manipulation. Codes and datasets will be open soon. The project page is at egosimulator.github.io.

Embodied navigation aims to build agents that interpret multimodal goals, reason in 3D space, and reach target destinations reliably in the real world. However, progress remains constrained by the lack of scalable, high-fidelity, and physically grounded interactive environments. Although real-world scanned datasets offer visual realism, they are limited by scale. In contrast, synthetic simulators scale more easily but often exhibit large sim-to-real gaps. We introduce Image2Sim, a real-time neural simulation framework that constructs high-quality interactive environments from posed RGB-D image sequences. The central idea is to decouple 3D spatial anchoring from photorealistic observation synthesis. For scene construction, Image2Sim uses a feed-forward feature Gaussian model that lifts posed RGB-D observations into a 3D feature-Gaussian representation in a single pass. For rendering, we propose a Geometry-Aware One-Step Pixel Flow model that transforms sparse and noisy Gaussian projections into high-quality panoramic RGB-D observations. Image2Sim also serves as a fully automated embodied data engine that generates high-fidelity observations, executable actions, and diverse navigation instructions at scale. It converts large collections of videos and images into nearly 20K interactive scenes and synthesizes more than 10 million navigation training samples. Navigation models trained entirely in these neural environments achieve strong improvements on major benchmarks and transfer effectively to real-world zero-shot settings. These results suggest that scalable neural simulation can serve as a practical training substrate for embodied navigation at scale.

This paper presents ShapeLLM, the first 3D Multimodal Large Language Model (LLM) designed for embodied interaction, exploring a universal 3D object understanding with 3D point clouds and languages. ShapeLLM is built upon an improved 3D encoder by extending ReCon to ReCon++ that benefits from multi-view image distillation for enhanced geometry understanding. By utilizing ReCon++ as the 3D point cloud input encoder for LLMs, ShapeLLM is trained on constructed instruction-following data and tested on our newly human-curated evaluation benchmark, 3D MM-Vet. ReCon++ and ShapeLLM achieve state-of-the-art performance in 3D geometry understanding and language-unified 3D interaction tasks, such as embodied visual grounding.

Recent advances in multimodal large language models (MLLMs) have opened new opportunities for embodied intelligence, enabling multimodal understanding, reasoning, and interaction, as well as continuous spatial decision-making. Nevertheless, current MLLM-based embodied systems face two critical limitations. First, Geometric Adaptability Gap: models trained solely on 2D inputs or with hard-coded 3D geometry injection suffer from either insufficient spatial information or restricted 2D generalization, leading to poor adaptability across tasks with diverse spatial demands. Second, Embodiment Constraint Gap: prior work often neglects the physical constraints and capacities of real robots, resulting in task plans that are theoretically valid but practically infeasible.To address these gaps, we introduce OmniEVA -- an embodied versatile planner that enables advanced embodied reasoning and task planning through two pivotal innovations: (1) a Task-Adaptive 3D Grounding mechanism, which introduces a gated router to perform explicit selective regulation of 3D fusion based on contextual requirements, enabling context-aware 3D grounding for diverse embodied tasks. (2) an Embodiment-Aware Reasoning framework that jointly incorporates task goals and embodiment constraints into the reasoning loop, resulting in planning decisions that are both goal-directed and executable. Extensive experimental results demonstrate that OmniEVA not only achieves state-of-the-art general embodied reasoning performance, but also exhibits a strong ability across a wide range of downstream scenarios. Evaluations of a suite of proposed embodied benchmarks, including both primitive and composite tasks, confirm its robust and versatile planning capabilities. Project page: https://omnieva.github.io

Online 3D occupancy prediction provides a comprehensive spatial understanding of embodied environments. While the innovative EmbodiedOcc framework utilizes 3D semantic Gaussians for progressive indoor occupancy prediction, it overlooks the geometric characteristics of indoor environments, which are primarily characterized by planar structures. This paper introduces EmbodiedOcc++, enhancing the original framework with two key innovations: a Geometry-guided Refinement Module (GRM) that constrains Gaussian updates through plane regularization, along with a Semantic-aware Uncertainty Sampler (SUS) that enables more effective updates in overlapping regions between consecutive frames. GRM regularizes the position update to align with surface normals. It determines the adaptive regularization weight using curvature-based and depth-based constraints, allowing semantic Gaussians to align accurately with planar surfaces while adapting in complex regions. To effectively improve geometric consistency from different views, SUS adaptively selects proper Gaussians to update. Comprehensive experiments on the EmbodiedOcc-ScanNet benchmark demonstrate that EmbodiedOcc++ achieves state-of-the-art performance across different settings. Our method demonstrates improved edge accuracy and retains more geometric details while ensuring computational efficiency, which is essential for online embodied perception. The code will be released at: https://github.com/PKUHaoWang/EmbodiedOcc2.

Modeling deformable objects - especially continuum materials - in a way that is physically plausible, generalizable, and data-efficient remains challenging across 3D vision, graphics, and robotic manipulation. Many existing methods oversimplify the rich dynamics of deformable objects or require large training sets, which often limits generalization. We introduce embodied MPM (EMPM), a deformable object modeling and simulation framework built on a differentiable Material Point Method (MPM) simulator that captures the dynamics of challenging materials. From multi-view RGB-D videos, our approach reconstructs geometry and appearance, then uses an MPM physics engine to simulate object behavior by minimizing the mismatch between predicted and observed visual data. We further optimize MPM parameters online using sensory feedback, enabling adaptive, robust, and physics-aware object representations that open new possibilities for robotic manipulation of complex deformables. Experiments show that EMPM outperforms spring-mass baseline models. Project website: https://embodied-mpm.github.io.

Localizing objects and parts from natural language in 3D space is essential for robotics, AR, and embodied AI, yet existing methods face a trade-off between the accuracy and geometric consistency of per-scene optimization and the efficiency of feed-forward inference. We present TrianguLang, a feed-forward framework for 3D localization that requires no camera calibration at inference. Unlike prior methods that treat views independently, we introduce Geometry-Aware Semantic Attention (GASA), which utilizes predicted geometry to gate cross-view feature correspondence, suppressing semantically plausible but geometrically inconsistent matches without requiring ground-truth poses. Validated on five benchmarks including ScanNet++ and uCO3D, TrianguLang achieves state-of-the-art feed-forward text-guided segmentation and localization, reducing user effort from O(N) clicks to a single text query. The model processes each frame at 1008x1008 resolution in sim57ms (sim18 FPS) without optimization, enabling practical deployment for interactive robotics and AR applications. Code and checkpoints are available at https://cwru-aism.github.io/triangulang/.

Large vision-language models (VLMs) still struggle with reliable 3D spatial reasoning, a core capability for embodied and physical AI systems. This limitation arises from their inability to capture fine-grained 3D geometry and spatial relationships. While recent efforts have introduced multi-view geometry transformers into VLMs, they typically fuse only the deep-layer features from vision and geometry encoders, discarding rich hierarchical signals and creating a fundamental bottleneck for spatial understanding. To overcome this, we propose SpatialStack, a general hierarchical fusion framework that progressively aligns vision, geometry, and language representations across the model hierarchy. Moving beyond conventional late-stage vision-geometry fusion, SpatialStack stacks and synchronizes multi-level geometric features with the language backbone, enabling the model to capture both local geometric precision and global contextual semantics. Building upon this framework, we develop VLM-SpatialStack, a model that achieves state-of-the-art performance on multiple 3D spatial reasoning benchmarks. Extensive experiments and ablations demonstrate that our multi-level fusion strategy consistently enhances 3D understanding and generalizes robustly across diverse spatial reasoning tasks, establishing SpatialStack as an effective and extensible design paradigm for vision-language-geometry integration in next-generation multimodal physical AI systems.

Vision-Language-Action (VLA) models drive next-generation autonomous systems, but training them requires scalable, high-quality annotations from complex environments. Current cloud pipelines rely on generic vision-language models (VLMs) that lack geometric reasoning and domain semantics due to their 2D image-text pretraining. To address this mismatch, we propose XEmbodied, a cloud-side foundation model that endows VLMs with intrinsic 3D geometric awareness and interaction with physical cues (e.g., occupancy grids, 3D boxes). Instead of treating geometry as auxiliary input, XEmbodied integrates geometric representations via a structured 3D Adapter and distills physical signals into context tokens using an Efficient Image-Embodied Adapter. Through progressive domain curriculum and reinforcement learning post-training, XEmbodied preserves general capabilities while demonstrating robust performance across 18 public benchmarks. It significantly improves spatial reasoning, traffic semantics, embodied affordance, and out-of-distribution generalization for large-scale scenario mining and embodied VQA.

World Action Models (WAMs) couple action generation with prediction of future states. Their effectiveness depends on whether future dynamics are modeled in a space that is both aligned with action generation and sufficiently geometry-aware to capture where and how actions change the scene. Existing WAMs typically satisfy only part of this requirement, relying on either perceptually heavy observation-space targets or auxiliary latent spaces that are not jointly structured for action relevance and geometry. We propose SG-WAM, a self-guided framework that learns geometry-aware action-conditioned dynamics directly in the policy-derived representation space. SG-WAM introduces learnable dynamics tokens and a Self-Guided World Predictor that forecasts their future latent states conditioned on intervening robot actions. Prediction targets are generated by an exponential moving average copy of the same policy backbone, providing stable supervision within the representation family used by the action expert. Geometric supervision further structures the policy image-token representations, providing spatially grounded context for the dynamics tokens and yielding a future-alignment space that is both action-relevant and geometry-aware. Latent future prediction, geometric grounding, and flow-matching action generation are jointly optimized end-to-end in a unified framework. Built on a 0.9B model without large-scale embodied pretraining, SG-WAM achieves 98.5% average success on LIBERO and 73% on LIBERO-Plus, while outperforming strong baselines in both in-distribution and out-of-distribution real-world evaluations.

We present PanoWorld, a panoramic video world model that generates geometry-consistent 360degree video from a single image and a caption. Existing panoramic video methods optimize primarily for visual realism and do not explicitly constrain the underlying 3D scene state, producing outputs that appear plausible yet exhibit inconsistent depth, broken correspondences, and implausible motion across the spherical surface. We address this gap by framing panoramic video generation as a geometry- and dynamics-consistent latent state modeling problem rather than pure visual synthesis. Building on a pre-trained perspective video world model, we introduce two lightweight regularizers: a depth consistency loss against pseudo ground-truth panoramic depth, and a trajectory consistency loss that supervises the 3D world-frame positions of tracked points across time. We further apply spherical-geometry-aware adaptation to the conditioning and positional encoding. We additionally introduce PanoGeo, a unified geometry-aware panoramic video dataset with consistent depth, trajectory, and prompt annotations across diverse real and synthetic sources, used for both training and stratified evaluation. Experiments show that PanoWorld improves geometric consistency over prior panoramic generation methods while maintaining competitive visual realism, establishing that panoramic video generation must be treated as a geometric modeling problem to support the holistic spatial understanding requirements of embodied AI applications. Code is available at https://github.com/ostadabbas/PanoWorld.

Embodied AI is moving from isolated perception or action modules toward physical agents that understand, plan under goals, act through robot bodies, monitor progress, and improve from experience. Existing systems address this loop only in parts: end-to-end policies generate actions but often lack spatial reasoning, planning, and execution assessment, while robot-agent systems orchestrate tools or specialists but do not learn a shared representation. This fragmentation limits general Physical Agentic AI. We present ACE-Brain-0.5, a unified embodied foundation model that organizes robot intelligence into five coupled functions: spatial perception, decision making, embodied interaction, self-monitoring, and self-improvement. Built on ACE-Brain-0, which established spatial intelligence as a shared scaffold across robot platforms, ACE-Brain-0.5 extends an understanding-centric model into a closed-loop foundation model. A single 8B backbone instantiates the first four functions: grounding objects and affordances, reasoning over 3D and egocentric spatial relations, decomposing instructions into subgoals, generating navigation and manipulation actions, and estimating progress for verification and recovery. To unify these capabilities without cross-task interference, we introduce SSR+, which extends Scaffold-Specialize-Reconcile with a Reactivate stage after task-vector merging. The fifth function, self-improvement, is realized by a companion framework that updates external execution state, including task schemas, spatial memory, and failure-recovery cases, from rollouts. Across fifteen benchmarks, ACE-Brain-0.5 improves over ACE-Brain-0 on 14 of 18 spatial perception and grounding benchmarks, achieves competitive navigation and manipulation performance, and provides strong progress estimation in ID and OOD settings. Together, these results mark an early step toward general Physical Agentic AI.

Recent progress in spatial reasoning with Multimodal Large Language Models (MLLMs) increasingly leverages geometric priors from 3D encoders. However, most existing integration strategies remain passive: geometry is exposed as a global stream and fused in an indiscriminate manner, which often induces semantic-geometry misalignment and redundant signals. We propose GeoThinker, a framework that shifts the paradigm from passive fusion to active perception. Instead of feature mixing, GeoThinker enables the model to selectively retrieve geometric evidence conditioned on its internal reasoning demands. GeoThinker achieves this through Spatial-Grounded Fusion applied at carefully selected VLM layers, where semantic visual priors selectively query and integrate task-relevant geometry via frame-strict cross-attention, further calibrated by Importance Gating that biases per-frame attention toward task-relevant structures. Comprehensive evaluation results show that GeoThinker sets a new state-of-the-art in spatial intelligence, achieving a peak score of 72.6 on the VSI-Bench. Furthermore, GeoThinker demonstrates robust generalization and significantly improved spatial perception across complex downstream scenarios, including embodied referring and autonomous driving. Our results indicate that the ability to actively integrate spatial structures is essential for next-generation spatial intelligence. Code can be found at https://github.com/Li-Hao-yuan/GeoThinker.

Instance-level object segmentation across disparate egocentric and exocentric views is a fundamental challenge in visual understanding, critical for applications in embodied AI and remote collaboration. This task is exceptionally difficult due to severe changes in scale, perspective, and occlusion, which destabilize direct pixel-level matching. While recent geometry-aware models like VGGT provide a strong foundation for feature alignment, we find they often fail at dense prediction tasks due to significant pixel-level projection drift, even when their internal object-level attention remains consistent. To bridge this gap, we introduce VGGT-Segmentor (VGGT-S), a framework that unifies robust geometric modeling with pixel-accurate semantic segmentation. VGGT-S leverages VGGT's powerful cross-view feature representation and introduces a novel Union Segmentation Head. This head operates in three stages: mask prompt fusion, point-guided prediction, and iterative mask refinement, effectively translating high-level feature alignment into a precise segmentation mask. Furthermore, we propose a single-image self-supervised training strategy that eliminates the need for paired annotations and enables strong generalization. On the Ego-Exo4D benchmark, VGGT-S sets a new state-of-the-art, achieving 67.7% and 68.0% average IoU for Ego to Exo and Exo to Ego tasks, respectively, significantly outperforming prior methods. Notably, our correspondence-free pretrained model surpasses most fully-supervised baselines, demonstrating the effectiveness and scalability of our approach.

Existing learning-based occupancy prediction methods rely on large-scale 3D annotations and generalize poorly across environments. We present FreeOcc, a training-free framework for open-vocabulary occupancy prediction from monocular or RGB-D sequences. Unlike prior approaches that require voxel-level supervision and ground-truth camera poses, FreeOcc operates without 3D annotations, pose ground truth, or any learning stage. FreeOcc incrementally builds a globally consistent occupancy map via a four-layer pipeline: a SLAM backbone estimates poses and sparse geometry; a geometrically consistent Gaussian update constructs dense 3D Gaussian maps; open-vocabulary semantics from off-the-shelf vision-language models are associated with Gaussian primitives; and a probabilistic Gaussian-to-occupancy projection produces dense voxel occupancy. Despite being entirely training-free and pose-agnostic, FreeOcc achieves over 2times improvements in IoU and mIoU on EmbodiedOcc-ScanNet compared to prior self-supervised methods. We further introduce ReplicaOcc, a benchmark for indoor open-vocabulary occupancy prediction, and show that FreeOcc transfers zero-shot to novel environments, substantially outperforming both supervised and self-supervised baselines. Project page: https://the-masses.github.io/freeocc-web/.

Consistent 3D geometry estimation from streaming RGB input is crucial for real-world applications such as autonomous driving, embodied AI, and large-scale reconstruction. While modern monocular geometry foundation models achieve strong single-image accuracy, they exhibit severe temporal inconsistency on continuous input, notably dominated by scale--shift drifting. Through targeted empirical analysis, we trace this instability to its root cause: fluctuations in latent feature statistics, whose mean and variance directly determine the predicted depth's scale and shift. Building on this insight, we introduce Dynamic Feature Normalization (DyFN), a lightweight, causal recurrent module that dynamically and robustly modulates feature statistics to maintain stable geometry over time. We adapt powerful pretrained monocular geometry models for streaming by finetuning only DyFN, a mere 2\% additional parameters, while keeping the backbone frozen, thereby achieving temporal consistency without compromising single-image accuracy. Extensive experiments across four benchmarks show that DyFN effectively eliminates temporal artifacts such as disjointed layering and positional jitter, and achieves state-of-the-art temporal stability, improving over prior streaming methods by up to 14\% and even outperforming heavier non-causal video baselines. Project Page: https://shawlyu.github.io/DyFN

Recent advances in control robot methods, from end-to-end vision-language-action frameworks to modular systems with predefined primitives, have advanced robots' ability to follow natural language instructions. Nonetheless, many approaches still struggle to scale to diverse environments, as they often rely on large annotated datasets and offer limited interpretability.In this work, we introduce EmbodiedCoder, a training-free framework for open-world mobile robot manipulation that leverages coding models to directly generate executable robot trajectories. By grounding high-level instructions in code, EmbodiedCoder enables flexible object geometry parameterization and manipulation trajectory synthesis without additional data collection or fine-tuning.This coding-based paradigm provides a transparent and generalizable way to connect perception with manipulation. Experiments on real mobile robots show that EmbodiedCoder achieves robust performance across diverse long-term tasks and generalizes effectively to novel objects and environments.Our results demonstrate an interpretable approach for bridging high-level reasoning and low-level control, moving beyond fixed primitives toward versatile robot intelligence. See the project page at: https://embodiedcoder.github.io/EmbodiedCoder/

Generating realistic 3D Human-Object Interactions (HOI) is a fundamental task for applications ranging from embodied AI to virtual content creation, which requires harmonizing high-level semantic intent with strict low-level physical constraints. Existing methods excel at semantic alignment, however, they struggle to maintain precise object contact. We reveal a key finding termed Geometric Forgetting: as diffusion model depth increases, semantic feature tend to overshadow object geometry feature, causing the model to lose its perception to object geometry. To address this, we propose MaMi-HOI, a hierarchical framework reconciling Macro-level kinematic fluidity with Micro-level spatial precision. First, to counteract geometric forgetting, we introduce the Geometry-Aware Proximity Adapter (GAPA), which explicitly re-injects dense object details to perform residual snapping corrections for precise contact. Nevertheless, such aggressive local enforcement can disrupt global dynamics, leading to robotic stiffness. In response, we introduce the Kinematic Harmony Adapter (KHA), which proactively aligns whole-body posture with spatial objectives, ensuring the skeleton actively accommodates constraints without compromising naturalness. Extensive experiments validate that MaMi-HOI simultaneously achieves natural motion and precise contact. Crucially, it extends generation capabilities to long-term tasks with complex trajectories, effectively bridging the gap between global navigation and high-fidelity manipulation in 3D scenes. Code is available at https://github.com/DON738110198/MaMi-HOI.git

Vision-Language-Action (VLA) models achieve strong benchmark performance but still struggle in real-world deployment with unseen objects, background shifts, and different robot embodiments. We argue that this stems from the lack of a unified geometry-aware manipulation representation, leaving existing VLAs vulnerable to low-level trajectory supervision, misaligned 3D features, and embodiment differences. To address this, we propose GEAR-VLA, a VLA framework for learning unified geometry-aware action representations for generalizable robotic manipulation. GEAR-VLA adopts coarse-to-fine action learning, where multi-source embodied pretraining equips the VLM with embodied reasoning and discrete action understanding before latent action tokens connect action semantics to a gradient-decoupled DiT continuous action expert. It further performs semantic-aligned 3D integration by aligning a trainable 3D spatial backbone with the VLA representation while freezing the original VLM-aligned visual pathway. To share this representation across robots, GEAR-VLA uses embodiment canonicalization, where embodiment-aware states and embodiment-invariant actions confine robot differences to the low-level interface. Extensive simulation and real-world experiments demonstrate strong generalization: GEAR-VLA achieves state-of-the-art performance on LIBERO, zero-shot LIBERO-Plus, and RoboTwin 2.0, reaches 85.9% success on AgileX and 81.0% on the pretraining-unseen LDT-01 embodiment, and obtains 90.1% success on a 6,360-trial universal grasping benchmark with 212 unseen objects. Code and models will be released at https://github.com/babynabeauty/GEAR-VLA.

World models have become indispensable tools for embodied intelligence, serving as powerful simulators capable of generating realistic robotic videos while addressing critical data scarcity challenges. However, current embodied world models exhibit limited physical awareness, particularly in modeling 3D geometry and motion dynamics, resulting in unrealistic video generation for contact-rich robotic scenarios. In this paper, we present RoboScape, a unified physics-informed world model that jointly learns RGB video generation and physics knowledge within an integrated framework. We introduce two key physics-informed joint training tasks: temporal depth prediction that enhances 3D geometric consistency in video rendering, and keypoint dynamics learning that implicitly encodes physical properties (e.g., object shape and material characteristics) while improving complex motion modeling. Extensive experiments demonstrate that RoboScape generates videos with superior visual fidelity and physical plausibility across diverse robotic scenarios. We further validate its practical utility through downstream applications including robotic policy training with generated data and policy evaluation. Our work provides new insights for building efficient physics-informed world models to advance embodied intelligence research. The code is available at: https://github.com/tsinghua-fib-lab/RoboScape.

Understanding the physical world requires perceptual models grounded in physical laws rather than mere statistical correlations. However, existing multimodal learning frameworks, focused on vision and language, lack physical consistency and overlook the intrinsic causal relationships among an object's geometry, material, vibration modes, and the sounds it produces. We introduce VibraVerse, a large-scale geometry-acoustics alignment dataset that explicitly bridges the causal chain from 3D geometry -> physical attributes -> modal parameters -> acoustic signals. Each 3D model has explicit physical properties (density, Young's modulus, Poisson's ratio) and volumetric geometry, from which modal eigenfrequencies and eigenvectors are computed for impact sound synthesis under controlled excitations. To establish this coherence, we introduce CLASP, a contrastive learning framework for cross-modal alignment that preserves the causal correspondence between an object's physical structure and its acoustic response. This framework enforces physically consistent alignment across modalities, ensuring that every sample is coherent, traceable to the governing equations, and embedded within a unified representation space spanning shape, image, and sound. Built upon VibraVerse, we define a suite of benchmark tasks for geometry-to-sound prediction, sound-guided shape reconstruction, and cross-modal representation learning. Extensive validations on these tasks demonstrate that models trained on VibraVerse exhibit superior accuracy, interpretability, and generalization across modalities. These results establish VibraVerse as a benchmark for physically consistent and causally interpretable multimodal learning, providing a foundation for sound-guided embodied perception and a deeper understanding of the physical world. The dataset will be open-sourced.

Reproducible closed-loop evaluation remains a major bottleneck in Embodied AI such as visual navigation. A promising path forward is high-fidelity simulation that combines photorealistic sensor rendering with geometrically grounded interaction in complex, open-world urban environments. Although recent video-3DGS methods ease open-world scene capturing, they are still unsuitable for benchmarking due to large visual and geometric sim-to-real gaps. To address these challenges, we introduce Wanderland, a real-to-sim framework that features multi-sensor capture, reliable reconstruction, accurate geometry, and robust view synthesis. Using this pipeline, we curate a diverse dataset of indoor-outdoor urban scenes and systematically demonstrate how image-only pipelines scale poorly, how geometry quality impacts novel view synthesis, and how all of these adversely affect navigation policy learning and evaluation reliability. Beyond serving as a trusted testbed for embodied navigation, Wanderland's rich raw sensor data further allows benchmarking of 3D reconstruction and novel view synthesis models. Our work establishes a new foundation for reproducible research in open-world embodied AI. Project website is at https://ai4ce.github.io/wanderland/.

Simulating robot-world interactions is a cornerstone of Embodied AI. Recently, a few works have shown promise in leveraging video generations to transcend the rigid visual/physical constraints of traditional simulators. However, they primarily operate in 2D space or are guided by static environmental cues, ignoring the fundamental reality that robot-world interactions are inherently 4D spatiotemporal events that require precise interactive modeling. To restore this 4D essence while ensuring the precise robot control, we introduce Kinema4D, a new action-conditioned 4D generative robotic simulator that disentangles the robot-world interaction into: i) Precise 4D representation of robot controls: we drive a URDF-based 3D robot via kinematics, producing a precise 4D robot control trajectory. ii) Generative 4D modeling of environmental reactions: we project the 4D robot trajectory into a pointmap as a spatiotemporal visual signal, controlling the generative model to synthesize complex environments' reactive dynamics into synchronized RGB/pointmap sequences. To facilitate training, we curated a large-scale dataset called Robo4D-200k, comprising 201,426 robot interaction episodes with high-quality 4D annotations. Extensive experiments demonstrate that our method effectively simulates physically-plausible, geometry-consistent, and embodiment-agnostic interactions that faithfully mirror diverse real-world dynamics. For the first time, it shows potential zero-shot transfer capability, providing a high-fidelity foundation for advancing next-generation embodied simulation.

Language-driven dexterous grasp generation requires the models to understand task semantics, 3D geometry, and complex hand-object interactions. While vision-language models have been applied to this problem, existing approaches directly map observations to grasp parameters without intermediate reasoning about physical interactions. We present DextER, Dexterous Grasp Generation with Embodied Reasoning, which introduces contact-based embodied reasoning for multi-finger manipulation. Our key insight is that predicting which hand links contact where on the object surface provides an embodiment-aware intermediate representation bridging task semantics with physical constraints. DextER autoregressively generates embodied contact tokens specifying which finger links contact where on the object surface, followed by grasp tokens encoding the hand configuration. On DexGYS, DextER achieves 67.14% success rate, outperforming state-of-the-art by 3.83%p with 96.4% improvement in intention alignment. We also demonstrate steerable generation through partial contact specification, providing fine-grained control over grasp synthesis.

Recently, world-action models (WAM) have emerged to bridge vision-language-action (VLA) models and world models, unifying their reasoning and instruction-following capabilities and spatio-temporal world modeling. However, existing WAM approaches often focus on modeling 2D appearance or latent representations, with limited geometric grounding-an essential element for embodied systems operating in the physical world. We present DriveDreamer-Policy, a unified driving world-action model that integrates depth generation, future video generation, and motion planning within a single modular architecture. The model employs a large language model to process language instructions, multi-view images, and actions, followed by three lightweight generators that produce depth, future video, and actions. By learning a geometry-aware world representation and using it to guide both future prediction and planning within a unified framework, the proposed model produces more coherent imagined futures and more informed driving actions, while maintaining modularity and controllable latency. Experiments on the Navsim v1 and v2 benchmarks demonstrate that DriveDreamer-Policy achieves strong performance on both closed-loop planning and world generation tasks. In particular, our model reaches 89.2 PDMS on Navsim v1 and 88.7 EPDMS on Navsim v2, outperforming existing world-model-based approaches while producing higher-quality future video and depth predictions. Ablation studies further show that explicit depth learning provides complementary benefits to video imagination and improves planning robustness.

Robotic manipulation in the open world requires not only recognizing what a scene looks like, but also anticipating how its 3D structure moves under interaction. We argue that synchronized RGB, depth, and optical flow, namely RGB-DF, provide a physically grounded representation that captures the underlying 4D dynamics of a scene. Compared to 2D pixel videos, this multi-modal synergy aligns visual appearance with geometric structure and temporal motion, creating a representation space significantly closer to the low-level end-effector actions demanded by robotic systems, thereby narrowing the gap between world prediction and policy learning. Building on this insight, we introduce RynnWorld-4D, a generative model that co-produces future RGB frames, depth maps, and optical flow from a single RGB-D image and a language instruction within one unified diffusion process. This 4D world model features a tri-branch architecture that integrates cross-modal attention with frame-wise 3D RoPE, ensuring that appearance, geometry, and motion evolve consistently. To supply training data at scale, we curate Rynn4DDataset 1.0, a massive dataset of over 254.4 million frames across egocentric human and robotic manipulation videos with high-quality pseudo-labels for depth and optical flow. We further propose RynnWorld-4D-Policy, an inverse dynamics head that consumes the internal 4D representations of RynnWorld-4D in a single forward pass, bypassing expensive multi-step denoising, to output robot actions in a closed-loop manner. Experiments show that RynnWorld-4D produces temporally and spatially coherent 4D predictions, and that RynnWorld-4D-Policy achieves state-of-the-art performance on real-world dexterous bimanual manipulation tasks, particularly excelling in tasks demanding spatial precision and temporal coordination.

Spatial intelligence requires more than describing object locations. Under incomplete observation, models must identify and acquire missing evidence, interpret it in a common spatial frame, and act on it. We introduce VA-Bench to evaluate the complete observe-reason-act-revise loop. General-purpose MLLMs learn procedural context from RGB-only demonstrations, actively select camera viewpoints, issue metric Cartesian commands, and revise them from execution feedback. Models receive no privileged object poses, oracle trajectories, or learned action heads. A fixed model-agnostic controller executes only model-specified targets. VA-Bench contains 14 base task families (11 single-arm and three dual-arm), seven held-out geometry/layout variants, and a long-horizon five-object composition track. We evaluate 12 primary model conditions in three independent runs over the same 20 physically verified seeds per base task, reporting terminal success, nine trajectory-level behavioral diagnostics, and subtask progress. First, the best-performing model scores 100.0% on target localization and 78.9% on spatial relations in the annotated run. Its three-run macro-average task success is only 53.93+/-3.17%. Second, active camera control significantly improves task success over passive multi-view observation. In one matched comparison, success rises from 27.86% to 57.50%. Third, held-out geometric transfer can reduce task success by over 30 percentage points. No model completes a strict long-horizon episode, despite substantial partial progress. VA-Bench thus tests whether general-purpose MLLMs can turn visual demonstrations and actively acquired evidence into successful embodied action.

Embodied tasks demand accurate, flexible, and semantically rich 3D scene representations. 3D semantic occupancy is well suited to this requirement, as it can model holistic 3D spaces by encoding geometric occupancy along with semantic categories. However, existing occupancy prediction methods struggle to meet practical deployment requirements, such as adapting to varying computing budgets, sensor setups, and observation views. In this paper, we propose a point-based Adaptive 3D Occupancy Prediction method, called AdaOcc, tailored for embodied scenarios. To accommodate heterogeneous sensor inputs, AdaOcc uses an adaptive geometry-guided dual-branch encoder that can support RGB images in various numbers of views with (estimated) depth maps or LiDAR scans. AdaOcc represents occupied regions via sparse semantic points trained with a progressive query learning strategy, allowing the prediction computational budget to be flexibly adjusted through query point numbers and decoder layers. To facilitate high-fidelity geometric modeling for lightweight point-based occupancy learning, we further propose a novel containment loss that regularizes predicted points to reside within valid occupied regions. Extensive experiments show that our method achieves a new state-of-the-art on Occ-ScanNet with considerable performance improvements over previous methods. Moreover, our framework demonstrates strong practical applicability as an adaptive 3D perception module in real-world embodied systems.

Effective human-agent collaboration in physical environments requires understanding not only what to act upon, but also where the actionable elements are and how to interact with them. Existing approaches often operate at the object level or disjointedly handle fine-grained affordance reasoning, lacking coherent, instruction-driven grounding and reasoning. In this work, we introduce a new task: Fine-grained 3D Embodied Reasoning, which requires an agent to predict, for each referenced affordance element in a 3D scene, a structured triplet comprising its spatial location, motion type, and motion axis, based on a task instruction. To solve this task, we propose AffordBot, a novel framework that integrates Multimodal Large Language Models (MLLMs) with a tailored chain-of-thought (CoT) reasoning paradigm. To bridge the gap between 3D input and 2D-compatible MLLMs, we render surround-view images of the scene and project 3D element candidates into these views, forming a rich visual representation aligned with the scene geometry. Our CoT pipeline begins with an active perception stage, prompting the MLLM to select the most informative viewpoint based on the instruction, before proceeding with step-by-step reasoning to localize affordance elements and infer plausible interaction motions. Evaluated on the SceneFun3D dataset, AffordBot achieves state-of-the-art performance, demonstrating strong generalization and physically grounded reasoning with only 3D point cloud input and MLLMs.

Visual navigation is an essential skill for home-assistance robots, providing the object-searching ability to accomplish long-horizon daily tasks. Many recent approaches use Large Language Models (LLMs) for commonsense inference to improve exploration efficiency. However, the planning process of LLMs is limited within texts and it is difficult to represent the spatial occupancy and geometry layout only by texts. Both are important for making rational navigation decisions. In this work, we seek to unleash the spatial perception and planning ability of Vision-Language Models (VLMs), and explore whether the VLM, with only on-board camera captured RGB/RGB-D stream inputs, can efficiently finish the visual navigation tasks in a mapless manner. We achieve this by developing the imagination-powered navigation framework ImagineNav, which imagines the future observation images at valuable robot views and translates the complex navigation planning process into a rather simple best-view image selection problem for VLM. To generate appropriate candidate robot views for imagination, we introduce the Where2Imagine module, which is distilled to align with human navigation habits. Finally, to reach the VLM preferred views, an off-the-shelf point-goal navigation policy is utilized. Empirical experiments on the challenging open-vocabulary object navigation benchmarks demonstrates the superiority of our proposed system.

We introduce ScanBot, a novel dataset designed for instruction-conditioned, high-precision surface scanning in robotic systems. In contrast to existing robot learning datasets that focus on coarse tasks such as grasping, navigation, or dialogue, ScanBot targets the high-precision demands of industrial laser scanning, where sub-millimeter path continuity and parameter stability are critical. The dataset covers laser scanning trajectories executed by a robot across 12 diverse objects and 6 task types, including full-surface scans, geometry-focused regions, spatially referenced parts, functionally relevant structures, defect inspection, and comparative analysis. Each scan is guided by natural language instructions and paired with synchronized RGB, depth, and laser profiles, as well as robot pose and joint states. Despite recent progress, existing vision-language action (VLA) models still fail to generate stable scanning trajectories under fine-grained instructions and real-world precision demands. To investigate this limitation, we benchmark a range of multimodal large language models (MLLMs) across the full perception-planning-execution loop, revealing persistent challenges in instruction-following under realistic constraints.

We present KM-ViPE (Knowledge Mapping Video Pose Engine), a real-time open-vocabulary SLAM framework for uncalibrated monocular cameras in dynamic environments. Unlike systems requiring depth sensors and offline calibration, KM-ViPE operates directly on raw RGB streams, making it ideal for ego-centric applications and harvesting internet-scale video data for training. KM-ViPE tightly couples DINO visual features with geometric constraints through a high-level features based adaptive robust kernel that handles both moving objects and movable static objects (e.g., moving furniture in ego-centric views). The system performs simultaneous online localization and open-vocabulary semantic mapping by fusing geometric and deep visual features aligned with language embeddings. Our results are competitive with state-of-the-art approaches, while existing solutions either operate offline, need depth data and/or odometry estimation, or lack dynamic scene robustness. KM-ViPE benefits from internet-scale training and uniquely combines online operation, uncalibrated monocular input, and robust handling of dynamic scenes, which makes it a good fit for autonomous robotics and AR/VR applications and advances practical spatial intelligence capabilities for embodied AI.

Digital entities such as AI agents and humanoid robots increasingly operate alongside real humans, yet their identity infrastructure is based on credentials rather than embodied biometric identity. We introduce Biometric Identity Provisioning (BIP), a new problem and solution framework that addresses: given an enrollment gallery of real human identities, provision virtual identities that are non-colliding with every enrolled identity, maintain sufficient inter-class separability, and are realizable as high-fidelity face images. The key geometric insight is that real face identities occupy a low-dimensional subspace of the embedding hypersphere, leaving no residual subspace for virtual identities. Hence, virtual identities must instead be allocated as unclaimed gaps within the real face manifold itself. BIP is therefore a constrained packing problem: available gaps vastly exceed any foreseeable enrollment scale, and provisioned identities remain non-colliding even as new real identities are subsequently enrolled. Grounded in this geometry, our repulsion-based allocation is not bounded by any fixed provisioning count; we demonstrate 10M non-colliding virtual identity embeddings against a gallery of 360K real identities. Realizing these embeddings as face images requires a generator that operates outside the training distribution of real face images; we introduce GapGen, a gap-aware generator trained with a curriculum that progressively extends synthesis into non-colliding regions, validated at 1M photorealistic virtual face images. We further construct v-LFW, a virtual counterpart to LFW face dataset, with protocols for virtual face verification, cross-reality matching, real-vs-virtual detection, and unified recognition and detection.

World models have emerged as a promising paradigm for embodied AI, yet existing systems often remain fragmented in the modalities they model and the functions they support. In particular, visual dynamics, geometric structure, and executable action are commonly coupled through separate interfaces or downstream modules rather than being jointly represented and evolved within a shared dynamics model. In this work, we present Thinker-WM, a unified multimodal world model that jointly models and generates RGB, metric depth, and robot action through a shared intermediate Unified Dynamics Transformer with modality-specific encoders and decoders. The model performs multimodal unification at the representation level: appearance, geometry, and action are transformed into a common dynamic representation and jointly evolved by shared parameters, while their distinct output structures are preserved. The same parameterization supports multiple functions, including joint video-action generation, world prediction, policy inference, action-conditioned generation, video-to-action generation, and inverse dynamics. To examine whether the shared representation captures action-related information, we introduce a lightweight motion probe that shows the frozen visual representation contains recoverable motion information. Thinker-WM is trained on a heterogeneous corpus comprising approximately 20K hours of egocentric video, 10K hours of real-robot data, and 1K hours of simulation data, including approximately 4K hours of real-robot data with aligned depth supervision. Extensive experiments demonstrate strong performance across embodied world-model evaluations. Thinker-WM ranks first on EWMBench, WorldOlympiad and WorldArena, while controlled studies further demonstrate the benefits of action conditioning, geometric interaction, and multi-function training within the shared representation.

Multi-embodiment grasping focuses on developing approaches that exhibit generalist behavior across diverse gripper designs. Existing methods often learn the kinematic structure of the robot implicitly and face challenges due to the difficulty of sourcing the required large-scale data. In this work, we present a data-efficient, flow-based, equivariant grasp synthesis architecture that can handle different gripper types with variable degrees of freedom and successfully exploit the underlying kinematic model, deducing all necessary information solely from the gripper and scene geometry. Unlike previous equivariant grasping methods, we translated all modules from the ground up to JAX and provide a model with batching capabilities over scenes, grippers, and grasps, resulting in smoother learning, improved performance and faster inference time. Our dataset encompasses grippers ranging from humanoid hands to parallel yaw grippers and includes 25,000 scenes and 20 million grasps.

Human behaviors in the real world naturally encode rich, long-term contextual information that can be leveraged to train embodied agents for perception, understanding, and acting. However, existing capture systems typically rely on costly studio setups and wearable devices, limiting the large-scale collection of scene-conditioned human motion data in the wild. To address this, we propose EmbodMocap, a portable and affordable data collection pipeline using two moving iPhones. Our key idea is to jointly calibrate dual RGB-D sequences to reconstruct both humans and scenes within a unified metric world coordinate frame. The proposed method allows metric-scale and scene-consistent capture in everyday environments without static cameras or markers, bridging human motion and scene geometry seamlessly. Compared with optical capture ground truth, we demonstrate that the dual-view setting exhibits a remarkable ability to mitigate depth ambiguity, achieving superior alignment and reconstruction performance over single iphone or monocular models. Based on the collected data, we empower three embodied AI tasks: monocular human-scene-reconstruction, where we fine-tune on feedforward models that output metric-scale, world-space aligned humans and scenes; physics-based character animation, where we prove our data could be used to scale human-object interaction skills and scene-aware motion tracking; and robot motion control, where we train a humanoid robot via sim-to-real RL to replicate human motions depicted in videos. Experimental results validate the effectiveness of our pipeline and its contributions towards advancing embodied AI research.

Vision-Language Models (VLMs) have shown strong visual understanding and are increasingly deployed in embodied AI systems, where reliable perception under real conditions is essential. However, existing benchmarks assess VLMs using clean images or isolated perturbations rather than stresses caused by physical scene formation. This design has two limitations: it covers only a narrow subset of everyday visual stresses, and some perturbations rarely appear in realistic embodied scenes. This gap raises a fundamental question: how can we define visual stress in a principled way that captures the diverse factors encountered in physical environments? To address this question, we formulate visual perception from an inverse graphics perspective and introduce RoboStressBench, a benchmark for evaluating VLM robustness to physical visual stress in embodied scenes. Inspired by the physical rendering equation, RoboStressBench decomposes visual stress into four physically grounded dimensions: Material (M), Viewpoint (V), Lighting (L), and Geometry (G). This design enables RoboStressBench to cover a broad range of visual stresses in real-world environments, while allowing controlled analysis of their effects on VLM capabilities such as visual recognition, reasoning, and planning. Through comprehensive evaluations of state-of-the-art VLMs, we identify stress-specific failure modes and reveal that different physical factors degrade different embodied capabilities, which are often obscured by aggregate accuracy. We further introduce a stress-aware agentic solver that detects visual stressors and invokes visual-editing skills before reasoning, improving robustness in high-stress scenarios. Overall, RoboStressBench provides a principled evaluation framework for diagnosing and improving VLM perception under real-world physical stress, supporting the development of more reliable embodied AI systems.

Embodied intelligence faces a fundamental data bottleneck. Models must capture how first-person perception, whole-body motion, dexterous manipulation, object state, sound, and touch evolve together as humans pursue goals over time. Existing datasets fragment this experience across viewpoints, modalities, or spatial scales, leaving the full perception-action loop only partially observed. We introduce the Ambient Capture Engine (ACE), a human-centric data engine that transforms real home environments into spatially calibrated, temporally synchronized recording studios. ACE operates at two complementary scales: a table-scale configuration resolves hand-object manipulation, while a room-scale configuration captures whole-body motion, locomotion, and interactions across a furnished home. ACE records egocentric and multi-view exocentric video, full-body and articulated hand motion, object geometry and 6-DoF trajectories, audio, and tactile signals as a unified multisensory stream. Using ACE, we build ACE-Data-0, comprising 150 hours and 17M video frames across 200 task categories, performed by 50 participants in 2 environments, for a total of 75,000 interaction episodes. The dataset spans atomic manipulation, long-horizon chains of household activities, and human-scene interaction, while preserving natural behavioral variation through goal-level rather than step-by-step instructions. We further introduce a hierarchical benchmark that progresses from signals to scene components and then to interactions. Evaluations of state-of-the-art methods expose substantial gaps under contact, occlusion, egomotion, and long temporal horizons. ACE-Data-0 provides synchronized human demonstrations with aligned perceptual, kinematic, and contact supervision, offering a scalable foundation for imitation learning, world models, vision-language-action systems, and embodied AI.

The advancement of Embodied AI necessitates high-quality simulation assets that faithfully mirror the real world. However, transforming raw visual observations into simulation-ready scenes remains challenging due to the lack of physical grounding and scene-level interactivity in current image-to-URDF methods. We propose NeoWorld-Pro, a framework that reformulates monocular scene reconstruction as procedural programming for interactive 3D environments. Leveraging the zero-shot reasoning and code synthesis capabilities of MLLMs, NeoWorld-Pro converts a single RGB image into executable programs specifying object geometry, articulation, and physical properties. A physics-in-the-loop mechanism then iteratively refines the generated programs by validating their execution in a physics engine, enforcing physically plausible articulations, valid object compositions and interactions, and accurate spatial relationships. Experiments show that NeoWorld-Pro outperforms open-loop and prior monocular reconstruction methods, while enabling complex downstream tasks such as stable stacking and fine-grained manipulation.

General-purpose robot control requires models to understand task intent, identify where to interact, capture how the scene evolves, and generate precise actions. Vision-language-action models provide strong semantic priors but typically do not explicitly model scene dynamics, while world-action models couple visual prediction with control without necessarily exposing the task-relevant semantic and spatial structure needed for fine-grained manipulation. We present MachEmbodied-U0 (ME-U0), a unified embodied foundation model connecting understanding and generation experts through a Mixture-of-Transformers architecture. Subtask prediction and affordance grounding guide joint visual-dynamics and action generation via flow matching. Visual dynamics encompass future RGB, depth, surface normals, and optical flow, providing complementary supervision for appearance, geometry, and motion. Multi-rate Rotary Position Encoding (MRPE) aligns visual dynamics with fine-grained control. We pretrain ME-U0 on approximately 4,200 hours of curated demonstrations from robotic datasets and egocentric datasets. Using only the supervision natively available in each downstream benchmark, ME-U0 achieves an average score of 17.66 on the RoboDojo simulation benchmark and average success rates of 99.0\% and 82.5\% on LIBERO and LIBERO-Plus, respectively. We additionally validate ME-U0 on real-world robotic manipulation tasks, demonstrating its effectiveness beyond simulation. Without corresponding downstream supervision, ME-U0 further demonstrates zero-shot subtask prediction, affordance grounding, and visual dynamics on simulated and real-world observations. Overall, ME-U0 combines competitive downstream control performance with transferable task-grounding and visual-dynamics capabilities across simulation and the real world.

Web-scale 3D asset collections are abundant, but rarely deployment-ready. Assets ship with arbitrary metric scale, incorrect pivots and forward axes, brittle geometry, and textures that do not support relighting, which limits their utility for embodied AI, robotics simulation, game development, and AR/VR. We present AmaraSpatial-10K, a dataset of over 10,000 synthetic 3D assets designed for downstream use rather than volume alone. Each asset is released as a metric-scaled, semantically anchored .glb with separated PBR material maps, a convex collision hull, a paired reference image, and rich multi-sentence text metadata. The dataset spans indoor objects, vehicles, architecture, creatures, and props under a unified spatial convention. Alongside the dataset, we introduce an evaluation suite for 3D asset banks. The suite comprises a continuous Scale Plausibility Score (SPS) with an LLM-as-Judge interval protocol, an LLM Concept Density score for metadata, an anchor-error metric, and a cross-modal CLIP coherence protocol, and we use it to audit AmaraSpatial-10K alongside matched subsets from Objaverse, HSSD, ABO, and GSO. Compared with Objaverse-sourced assets, we demonstrate that AmaraSpatial-10K substantially improves text-based retrieval precision (CLIP Recall@5 of 0.612 vs 0.181, a 3.4x improvement with median rank falling from 267 to 3), and we establish that it satisfies the spatial and semantic prerequisites for physics-aware scene composition and embodied-AI asset banks, leaving those downstream evaluations to future work. AmaraSpatial-10K is publicly available on Hugging Face.

Hand-object interaction (HOI) modeling remains challenging because it requires joint reasoning about hand articulation, object geometry, contact, semantics, and dynamics under severe visual uncertainty. Foundation models introduce transferable prior knowledge learned from large-scale cross-domain data, offering new ways to address these challenges beyond task-specific data and models. However, the rapidly growing literature remains fragmented, and existing studies typically describe these methods simply as ``using large models'' without systematically characterizing what knowledge is introduced, where it enters the HOI pipeline, or which HOI uncertainty it helps reduce. This survey presents the first systematic review of foundation-model priors for HOI. We organize the literature into six HOI tasks spanning reconstruction and generation. More importantly, we establish a taxonomy of eight foundation-model sub-priors grouped into geometric, semantic, and visual families. Geometric priors encompass shape retrieval, shape reconstruction, and spatial reconstruction; semantic priors include semantic grounding and language reasoning; and visual priors cover visual representation, image generation, and video generation. Based on this taxonomy, we systematically analyze how different priors are represented, injected, and adapted across HOI pipelines and tasks. Beyond how foundation models empower HOI, we further examine how HOI-derived knowledge is used in robot learning, including human-data pretraining, human-to-robot skill transfer, and HOI-to-robot data generation. Finally, we summarize datasets and evaluation protocols, and discuss limitations and future directions toward more generalizable HOI systems. To support long-term progress, we curate a live repository that continuously aggregates emerging methods and benchmarks.

Embodied Artificial Intelligence (AI) is an intelligent system paradigm for achieving Artificial General Intelligence (AGI), serving as the cornerstone for various applications and driving the evolution from cyberspace to physical systems. Recent breakthroughs in Large Language Models (LLMs) and World Models (WMs) have drawn significant attention for embodied AI. On the one hand, LLMs empower embodied AI via semantic reasoning and task decomposition, bringing high-level natural language instructions and low-level natural language actions into embodied cognition. On the other hand, WMs empower embodied AI by building internal representations and future predictions of the external world, facilitating physical law-compliant embodied interactions. As such, this paper comprehensively explores the literature in embodied AI from basics to advances, covering both LLM driven and WM driven works. In particular, we first present the history, key technologies, key components, and hardware systems of embodied AI, as well as discuss its development via looking from unimodal to multimodal angle. We then scrutinize the two burgeoning fields of embodied AI, i.e., embodied AI with LLMs/multimodal LLMs (MLLMs) and embodied AI with WMs, meticulously delineating their indispensable roles in end-to-end embodied cognition and physical laws-driven embodied interactions. Building upon the above advances, we further share our insights on the necessity of the joint MLLM-WM driven embodied AI architecture, shedding light on its profound significance in enabling complex tasks within physical worlds. In addition, we examine representative applications of embodied AI, demonstrating its wide applicability in real-world scenarios. Last but not least, we point out future research directions of embodied AI that deserve further investigation.

We propose Embodied AI as the next fundamental step in the pursuit of Artificial General Intelligence, juxtaposing it against current AI advancements, particularly Large Language Models. We traverse the evolution of the embodiment concept across diverse fields - philosophy, psychology, neuroscience, and robotics - to highlight how EAI distinguishes itself from the classical paradigm of static learning. By broadening the scope of Embodied AI, we introduce a theoretical framework based on cognitive architectures, emphasizing perception, action, memory, and learning as essential components of an embodied agent. This framework is aligned with Friston's active inference principle, offering a comprehensive approach to EAI development. Despite the progress made in the field of AI, substantial challenges, such as the formulation of a novel AI learning theory and the innovation of advanced hardware, persist. Our discussion lays down a foundational guideline for future Embodied AI research. Highlighting the importance of creating Embodied AI agents capable of seamless communication, collaboration, and coexistence with humans and other intelligent entities within real-world environments, we aim to steer the AI community towards addressing the multifaceted challenges and seizing the opportunities that lie ahead in the quest for AGI.

We introduce Embodied-R1.5, a unified Embodied Foundation Model (EFM) that integrates comprehensive embodied reasoning capabilities, spanning embodied cognition, task planning, correction, and pointing, within a single architecture toward general physical intelligence. Leveraging three automated data construction pipelines to significantly expand the data coverage of critical capabilities, we build a large-scale data system of over 15B tokens, and design a multi-task balanced RL recipe to alleviate heterogeneous task conflicts. We further introduce a Planner-Grounder-Corrector (PGC) closed-loop framework that enables a single model to autonomously execute and self-correct over long-horizon tasks. With only 8B parameters, Embodied-R1.5 achieves SOTA on 16 out of 24 embodied VLM benchmarks, surpassing leading models like Gemini-Robotics-ER-1.5 and GPT-5.4. Benefiting from the internalized embodied capabilities, Embodied-R1.5 can be fine-tuned into a VLA with only a small amount of data, outperforming leading VLA models like π_{0.5} across 4 popular manipulation benchmark suites. We further conduct extensive zero-shot real-robot experiments, validating performance in instruction following, affordance grounding, articulated object manipulation, and long-horizon complex tasks, demonstrating strong generalization to the physical world. We open-source model weights, datasets, training code, and EmbodiedEvalKit, an evaluation framework tailored for embodied tasks, to facilitate future research in EFMs.

Embodied Artificial Intelligence (Embodied AI) is an emerging frontier in robotics, driven by the need for autonomous systems that can perceive, reason, and act in complex physical environments. While single-arm systems have shown strong task performance, collaborative dual-arm systems are essential for handling more intricate tasks involving rigid, deformable, and tactile-sensitive objects. To advance this goal, we launched the RoboTwin Dual-Arm Collaboration Challenge at the 2nd MEIS Workshop, CVPR 2025. Built on the RoboTwin Simulation platform (1.0 and 2.0) and the AgileX COBOT-Magic Robot platform, the competition consisted of three stages: Simulation Round 1, Simulation Round 2, and a final Real-World Round. Participants totally tackled 17 dual-arm manipulation tasks, covering rigid, deformable, and tactile-based scenarios. The challenge attracted 64 global teams and over 400 participants, producing top-performing solutions like SEM and AnchorDP3 and generating valuable insights into generalizable bimanual policy learning. This report outlines the competition setup, task design, evaluation methodology, key findings and future direction, aiming to support future research on robust and generalizable bimanual manipulation policies. The Challenge Webpage is available at https://robotwin-benchmark.github.io/cvpr-2025-challenge/.

Embodied AI is widely recognized as a key element of artificial general intelligence because it involves controlling embodied agents to perform tasks in the physical world. Building on the success of large language models and vision-language models, a new category of multimodal models -- referred to as vision-language-action models (VLAs) -- has emerged to address language-conditioned robotic tasks in embodied AI by leveraging their distinct ability to generate actions. In recent years, a myriad of VLAs have been developed, making it imperative to capture the rapidly evolving landscape through a comprehensive survey. To this end, we present the first survey on VLAs for embodied AI. This work provides a detailed taxonomy of VLAs, organized into three major lines of research. The first line focuses on individual components of VLAs. The second line is dedicated to developing control policies adept at predicting low-level actions. The third line comprises high-level task planners capable of decomposing long-horizon tasks into a sequence of subtasks, thereby guiding VLAs to follow more general user instructions. Furthermore, we provide an extensive summary of relevant resources, including datasets, simulators, and benchmarks. Finally, we discuss the challenges faced by VLAs and outline promising future directions in embodied AI. We have created a project associated with this survey, which is available at https://github.com/yueen-ma/Awesome-VLA.

Articulated objects are central to interactive 3D applications, including embodied AI, robotics, and VR/AR, where functional part decomposition and kinematic motion are essential. Yet producing high-fidelity articulated assets remains difficult to scale because it requires reliable part decomposition and kinematic rigging. Existing approaches largely fall into two paradigms: optimization-based reconstruction or distillation, which can be accurate but often takes tens of minutes to hours per instance, and inference-time methods that rely on template or part retrieval, producing plausible results that may not match the specific structure and appearance in the input observation. We introduce a part-centric generative framework for articulated object creation that synthesizes part geometry, composition, and articulation under explicit part-aware conditioning. Our representation models an object as a set of movable parts, each encoded by latent tokens augmented with part identity and articulation cues. Conditioned on a single image, the model generates articulated 3D assets that preserve instance-level correspondence while maintaining valid part structure and motion. The resulting approach avoids per-instance optimization, enables fast feed-forward inference, and supports controllable assembly and articulation, which are important for embodied interaction. Experiments on common articulated categories (e.g., drawers and doors) show improved input consistency, part accuracy, and articulation plausibility over optimization-based and retrieval-driven baselines, while substantially reducing inference time.

Embodied AI is a crucial frontier in robotics, capable of planning and executing action sequences for robots to accomplish long-horizon tasks in physical environments. In this work, we introduce EmbodiedGPT, an end-to-end multi-modal foundation model for embodied AI, empowering embodied agents with multi-modal understanding and execution capabilities. To achieve this, we have made the following efforts: (i) We craft a large-scale embodied planning dataset, termed EgoCOT. The dataset consists of carefully selected videos from the Ego4D dataset, along with corresponding high-quality language instructions. Specifically, we generate a sequence of sub-goals with the "Chain of Thoughts" mode for effective embodied planning. (ii) We introduce an efficient training approach to EmbodiedGPT for high-quality plan generation, by adapting a 7B large language model (LLM) to the EgoCOT dataset via prefix tuning. (iii) We introduce a paradigm for extracting task-related features from LLM-generated planning queries to form a closed loop between high-level planning and low-level control. Extensive experiments show the effectiveness of EmbodiedGPT on embodied tasks, including embodied planning, embodied control, visual captioning, and visual question answering. Notably, EmbodiedGPT significantly enhances the success rate of the embodied control task by extracting more effective features. It has achieved a remarkable 1.6 times increase in success rate on the Franka Kitchen benchmark and a 1.3 times increase on the Meta-World benchmark, compared to the BLIP-2 baseline fine-tuned with the Ego4D dataset.

Constructing a physically realistic and accurately scaled simulated 3D world is crucial for the training and evaluation of embodied intelligence tasks. The diversity, realism, low cost accessibility and affordability of 3D data assets are critical for achieving generalization and scalability in embodied AI. However, most current embodied intelligence tasks still rely heavily on traditional 3D computer graphics assets manually created and annotated, which suffer from high production costs and limited realism. These limitations significantly hinder the scalability of data driven approaches. We present EmbodiedGen, a foundational platform for interactive 3D world generation. It enables the scalable generation of high-quality, controllable and photorealistic 3D assets with accurate physical properties and real-world scale in the Unified Robotics Description Format (URDF) at low cost. These assets can be directly imported into various physics simulation engines for fine-grained physical control, supporting downstream tasks in training and evaluation. EmbodiedGen is an easy-to-use, full-featured toolkit composed of six key modules: Image-to-3D, Text-to-3D, Texture Generation, Articulated Object Generation, Scene Generation and Layout Generation. EmbodiedGen generates diverse and interactive 3D worlds composed of generative 3D assets, leveraging generative AI to address the challenges of generalization and evaluation to the needs of embodied intelligence related research. Code is available at https://horizonrobotics.github.io/robot_lab/embodied_gen/index.html.

Embodied intelligence, a grand challenge in artificial intelligence, is fundamentally constrained by the limited spatial understanding and reasoning capabilities of current models. Prevailing efforts to address this through enhancing Vision-Language Models (VLMs) are trapped in a dilemma: template-based datasets are scalable but structurally rigid, while manual annotation is linguistically diverse but unscalable and, critically, computationally imprecise. We introduce SPRITE, a novel framework that overcomes this dilemma by leveraging simulators and large models to programmatically synthesize scalable, diverse, and high-quality spatial reasoning data. The core innovation of SPRITE is to reframe ground-truth generation as a code-generation task. We utilize LLMs to compile complex spatial questions into executable programs, which are then verified against high-precision scene meta-information extracted from simulators. This ensures our ground truth is both computationally precise and verifiable, while the generative power of LLMs provides vast linguistic diversity. Leveraging this pipeline, we have curated a dataset encompassing 3 simulators, 11k+ scenes, and 300k+ image/video instruction-tuning pairs. We demonstrate that a VLM trained on our data achieves significant performance gains on multiple spatial benchmarks and outperforms other open-source datasets of equivalent size. Furthermore, a scalability analysis confirms our hypothesis that overcoming the low-diversity nature of traditional template methods is essential for building robust, generalizable spatial intelligence. We will make the SPRITE framework code and the full 300k+ dataset publicly available to facilitate future research in spatial intelligence.

We present EmbodiedMAE, a unified 3D multi-modal representation for robot manipulation. Current approaches suffer from significant domain gaps between training datasets and robot manipulation tasks, while also lacking model architectures that can effectively incorporate 3D information. To overcome these limitations, we enhance the DROID dataset with high-quality depth maps and point clouds, constructing DROID-3D as a valuable supplement for 3D embodied vision research. Then we develop EmbodiedMAE, a multi-modal masked autoencoder that simultaneously learns representations across RGB, depth, and point cloud modalities through stochastic masking and cross-modal fusion. Trained on DROID-3D, EmbodiedMAE consistently outperforms state-of-the-art vision foundation models (VFMs) in both training efficiency and final performance across 70 simulation tasks and 20 real-world robot manipulation tasks on two robot platforms. The model exhibits strong scaling behavior with size and promotes effective policy learning from 3D inputs. Experimental results establish EmbodiedMAE as a reliable unified 3D multi-modal VFM for embodied AI systems, particularly in precise tabletop manipulation settings where spatial perception is critical.

Neural representations carry rich geometric structure; but does that structure causally shape behavior? To address this question, we intervene along paths through activation space defined by different geometries, and measure the behavioral trajectories they induce. In particular, we test whether interventions that respect the geometry of activation space will yield behaviors close to those the model exhibits naturally. Concretely, we first fit an activation manifold M_h to representations and a behavior manifold M_y to output probability distributions. We then test the link M_h leftrightarrow M_y via interventions: we find that steering along M_h, which we term manifold steering, yields behavioral trajectories that follow M_y, while linear steering -- which assumes a Euclidean geometry -- cuts through off-manifold regions and hence produces unnatural outputs. Moreover, optimizing interventions in activation space to produce paths along M_y recovers activation trajectories that trace the curvature of M_h. We demonstrate this bidirectional relationship between the geometry of representation and behavior across tasks and modalities. In language models, we use reasoning tasks with cyclic and sequential geometries as well as in-context learning tasks with more complex graph geometries. In a video world model, we use a task with geometry corresponding to physical dynamics. Overall, our work shows that geometry in neural representation is not merely incidental, but is in fact the proper object for enabling principled control via intervention on internals. This recasts the core problem of steering from finding the right direction to finding the right geometry.

Embodied navigation is a fundamental capability for robotic agents operating. Real-world deployment requires open vocabulary generalization and low training overhead, motivating zero-shot methods rather than task-specific RL training. However, existing zero-shot methods that build explicit 3D scene graphs often compress rich visual observations into text-only relations, leading to high construction cost, irreversible loss of visual evidence, and constrained vocabularies. To address these limitations, we introduce the Multi-modal 3D Scene Graph (M3DSG), which preserves visual cues by replacing textual relation

Embodied artificial intelligence emphasizes the role of an agent's body in generating human-like behaviors. The recent efforts on EmbodiedAI pay a lot of attention to building up machine learning models to possess perceiving, planning, and acting abilities, thereby enabling real-time interaction with the world. However, most works focus on bounded indoor environments, such as navigation in a room or manipulating a device, with limited exploration of embodying the agents in open-world scenarios. That is, embodied intelligence in the open and outdoor environment is less explored, for which one potential reason is the lack of high-quality simulators, benchmarks, and datasets. To address it, in this paper, we construct a benchmark platform for embodied intelligence evaluation in real-world city environments. Specifically, we first construct a highly realistic 3D simulation environment based on the real buildings, roads, and other elements in a real city. In this environment, we combine historically collected data and simulation algorithms to conduct simulations of pedestrian and vehicle flows with high fidelity. Further, we designed a set of evaluation tasks covering different EmbodiedAI abilities. Moreover, we provide a complete set of input and output interfaces for access, enabling embodied agents to easily take task requirements and current environmental observations as input and then make decisions and obtain performance evaluations. On the one hand, it expands the capability of existing embodied intelligence to higher levels. On the other hand, it has a higher practical value in the real world and can support more potential applications for artificial general intelligence. Based on this platform, we evaluate some popular large language models for embodied intelligence capabilities of different dimensions and difficulties.

World models for embodied AI must be physically viable: constructed to answer intervention queries by representing the physical structure governing action outcomes, rather than merely predicting future observations. Existing observation-predictive world models can produce visually plausible but physically wrong rollouts. This failure is structural; distinct physical systems can look identical yet diverge under intervention. We expose this problem with controlled benchmarks that fix the visible scene while varying latent physics. We show that such models may recommend infeasible actions, mispredict interaction outcomes, or certify unsafe behavior. We argue that embodied AI requires world models that identify the simplest physical abstraction sufficient to answer an intervention query. Such a model comprises modular components, including environment representation, latent state and parameter estimation, action specification, interventional dynamics, and query-level response. An autonomous orchestrator should identify the relevant abstraction and compose compatible learned and structured components per query. When closed-form physics is unavailable, uncertain, or costly, the transition model may be analytic, simulated, learned, or hybrid, but it must preserve the structure that determines interventional outcomes. This decomposition makes the model interpretable, its components verifiable, and its outputs auditable against the query. It also provides a design principle for new world models and a feasibility test for existing ones: the right abstraction is not the most detailed model of the world, but the simplest model that preserves the distinctions relevant to the query. We demonstrate this approach on queries that existing systems fail to answer correctly, and outline how an orchestrator can dynamically assemble and adapt physically viable models for planning, control, and verification.

Brain-body co-evolution enables animals to develop complex behaviors in their environments. Inspired by this biological synergy, embodied co-design (ECD) has emerged as a transformative paradigm for creating intelligent agents-from virtual creatures to physical robots-by jointly optimizing their morphologies and controllers rather than treating control in isolation. This integrated approach facilitates richer environmental interactions and robust task performance. In this survey, we provide a systematic overview of recent advances in ECD. We first formalize the concept of ECD and position it within related fields. We then introduce a hierarchical taxonomy: a lower layer that breaks down agent design into three fundamental components-controlling brain, body morphology, and task environment-and an upper layer that integrates these components into four major ECD frameworks: bi-level, single-level, generative, and open-ended. This taxonomy allows us to synthesize insights from more than one hundred recent studies. We further review notable benchmarks, datasets, and applications in both simulated and real-world scenarios. Finally, we identify significant challenges and offer insights into promising future research directions. A project associated with this survey has been created at https://github.com/Yuxing-Wang-THU/SurveyBrainBody.

We introduce HY-Embodied-0.5, a family of foundation models specifically designed for real-world embodied agents. To bridge the gap between general Vision-Language Models (VLMs) and the demands of embodied agents, our models are developed to enhance the core capabilities required by embodied intelligence: spatial and temporal visual perception, alongside advanced embodied reasoning for prediction, interaction, and planning. The HY-Embodied-0.5 suite comprises two primary variants: an efficient model with 2B activated parameters designed for edge deployment, and a powerful model with 32B activated parameters targeted for complex reasoning. To support the fine-grained visual perception essential for embodied tasks, we adopt a Mixture-of-Transformers (MoT) architecture to enable modality-specific computing. By incorporating latent tokens, this design effectively enhances the perceptual representation of the models. To improve reasoning capabilities, we introduce an iterative, self-evolving post-training paradigm. Furthermore, we employ on-policy distillation to transfer the advanced capabilities of the large model to the smaller variant, thereby maximizing the performance potential of the compact model. Extensive evaluations across 22 benchmarks, spanning visual perception, spatial reasoning, and embodied understanding, demonstrate the effectiveness of our approach. Our MoT-2B model outperforms similarly sized state-of-the-art models on 16 benchmarks, while the 32B variant achieves performance comparable to frontier models such as Gemini 3.0 Pro. In downstream robot control experiments, we leverage our robust VLM foundation to train an effective Vision-Language-Action (VLA) model, achieving compelling results in real-world physical evaluations. Code and models are open-sourced at https://github.com/Tencent-Hunyuan/HY-Embodied.

Embodied Artificial Intelligence (AI) is an intelligent system formed by agents and their environment through active perception, embodied cognition, and action interaction. Existing embodied AI remains confined to human-crafted setting, in which agents are trained on given memory and construct models for given tasks, enabling fixed embodiments to interact with relatively static environments. Such methods fail in in-the-wild setting characterized by variable embodiments and dynamic open environments. This paper introduces self-evolving embodied AI, a new paradigm in which agents operate based on their changing state and environment with memory self-updating, task self-switching, environment self-prediction, embodiment self-adaptation, and model self-evolution, aiming to achieve continually adaptive intelligence with autonomous evolution. Specifically, we present the definition, framework, components, and mechanisms of self-evolving embodied AI, systematically review state-of-the-art works for realized components, discuss practical applications, and point out future research directions. We believe that self-evolving embodied AI enables agents to autonomously learn and interact with environments in a human-like manner and provide a new perspective toward general artificial intelligence.

Multimodal Large Language Models (MLLMs) show promising results as decision-making engines for embodied agents operating in complex, physical environments. However, existing benchmarks often prioritize high-level planning or spatial reasoning, leaving the fine-grained action intelligence required for embodied physical interaction underexplored. To address this gap, we introduce CFG-Bench, a new benchmark designed to systematically evaluate this crucial capability. CFG-Bench consists of 1,368 curated videos paired with 19,562 three-modalities question-answer pairs targeting four cognitive abilities: 1) Physical Interaction, 2) Temporal-Causal Relation, 3) Intentional Understanding, and 4) Evaluative Judgment. Together, these dimensions provide a systematic framework for assessing a model's ability to translate visual observations into actionable knowledge, moving beyond mere surface-level recognition. Our comprehensive evaluation on CFG-Bench reveals that leading MLLMs struggle to produce detailed instructions for physical interactions and exhibit profound limitations in the higher-order reasoning of intention and evaluation. Moreover, supervised fine-tuning (SFT) on our data demonstrates that teaching an MLLMs to articulate fine-grained actions directly translates to significant performance gains on established embodied benchmarks. Our analysis highlights these limitations and offers insights for developing more capable and grounded embodied agents.

Latent Action Models (LAMs) enable Vision-Language-Action (VLA) systems to learn semantic action representations from large-scale unannotated data. Yet, we identify two bottlenecks of LAMs: 1) the commonly adopted end-to-end trained image encoder suffers from poor spatial understanding; 2) LAMs can be fragile when input frames are distant, leading to limited temporal perception. Such factors inevitably hinder stable and clear action modeling. To this end, we propose Farsighted-LAM, a latent action framework with geometry-aware spatial encoding and multi-scale temporal modeling, capturing structural priors and dynamic motion patterns from consecutive frames. We further propose SSM-VLA, an end-to-end VLA framework built upon Farsighted-LAM, which integrates structured perception with a visual Chain-of-Thought module to explicitly reason about environmental dynamics, enhancing decision consistency and interpretability. We validate SSM-VLA on multiple VLA tasks in both simulation and real-world settings, and achieve state-of-the-art performance. Our results demonstrate that our strategy of combining geometry-aware modeling, temporal coherence, and explicit reasoning is effective in enhancing the robustness and generalizability of embodied intelligence.

Training Vision-Language-Action (VLA) models for generalist robots typically requires large-scale real-world robot data, which is expensive and time-consuming to collect. The inefficiency of physical data collection severely limits the scalability, and generalization capacity of current VLA systems. To address this challenge, we introduce GigaBrain-0, a novel VLA foundation model empowered by world model-generated data (e.g., video generation, real2real transfer, human transfer, view transfer, sim2real transfer data). By leveraging world models to generate diverse data at scale, GigaBrain-0 significantly reduces reliance on real robot data while improving cross-task generalization. Our approach further improves policy robustness through RGBD input modeling and embodied Chain-of-Thought (CoT) supervision, enabling the model to reason about spatial geometry, object states, and long-horizon dependencies during task execution. This leads to substantial gains in real-world performance on dexterous, long-horizon, and mobile manipulation tasks. Extensive experiments demonstrate that GigaBrain-0 achieves superior generalization across variations in appearances (e.g., textures, colors), object placements, and camera viewpoints. Additionally, we present GigaBrain-0-Small, an optimized lightweight variant designed to run efficiently on devices such as the NVIDIA Jetson AGX Orin.

We introduce Replica, a dataset of 18 highly photo-realistic 3D indoor scene reconstructions at room and building scale. Each scene consists of a dense mesh, high-resolution high-dynamic-range (HDR) textures, per-primitive semantic class and instance information, and planar mirror and glass reflectors. The goal of Replica is to enable machine learning (ML) research that relies on visually, geometrically, and semantically realistic generative models of the world - for instance, egocentric computer vision, semantic segmentation in 2D and 3D, geometric inference, and the development of embodied agents (virtual robots) performing navigation, instruction following, and question answering. Due to the high level of realism of the renderings from Replica, there is hope that ML systems trained on Replica may transfer directly to real world image and video data. Together with the data, we are releasing a minimal C++ SDK as a starting point for working with the Replica dataset. In addition, Replica is `Habitat-compatible', i.e. can be natively used with AI Habitat for training and testing embodied agents.

Animatable 3D assets, defined as geometry equipped with an articulated skeleton and skinning weights, are fundamental to interactive graphics, embodied agents, and animation production. While recent 3D generative models can synthesize visually plausible shapes from images, the results are typically static. Obtaining usable rigs via post-hoc auto-rigging is brittle and often produces skeletons that are topologically inconsistent with the generated geometry. We present AniGen, a unified framework that directly generates animate-ready 3D assets conditioned on a single image. Our key insight is to represent shape, skeleton, and skinning as mutually consistent S^3 Fields (Shape, Skeleton, Skin) defined over a shared spatial domain. To enable the robust learning of these fields, we introduce two technical innovations: (i) a confidence-decaying skeleton field that explicitly handles the geometric ambiguity of bone prediction at Voronoi boundaries, and (ii) a dual skin feature field that decouples skinning weights from specific joint counts, allowing a fixed-architecture network to predict rigs of arbitrary complexity. Built upon a two-stage flow-matching pipeline, AniGen first synthesizes a sparse structural scaffold and then generates dense geometry and articulation in a structured latent space. Extensive experiments demonstrate that AniGen substantially outperforms state-of-the-art sequential baselines in rig validity and animation quality, generalizing effectively to in-the-wild images across diverse categories including animals, humanoids, and machinery. Homepage: https://yihua7.github.io/AniGen-web/

Generative video models now synthesize footage nearly indistinguishable from reality. Their promise as interactive tools hinges on fine-grained control of how objects and the camera move over time, yet each existing approach captures only part of this: camera-parameter methods steer the viewpoint but cannot move objects, 2D-trajectory methods act in the image plane and ignore depth and occlusion, and recent 3D methods add geometry but run only offline at a fixed length. In particular, none combines 3D-consistent control of both camera and objects with real-time, streaming generation. Here we show that camera motion, object trajectories, and depth can be unified into a single 3D point-track representation, from which one model performs joint camera and object control, depth editing, and motion transfer in a single forward pass. To learn this interface at scale, we mine in-the-wild video for 3D motion supervision, yielding OpenVidHD-Motion3D, and encode it with a lightweight Geometric Motion Head that plugs into a pretrained video diffusion model. Because this encoder is temporally separable, we distill the model into a causal streaming student that generates arbitrarily long video in four denoising steps at memory independent of length. This unified design surpasses prior camera-only, 2D, and offline-3D methods in motion-control precision while covering modalities they address only in isolation. 4DStreamCtrl runs at 20 FPS on a single high-end GPU for 480p video and stays temporally coherent over hundreds of frames, enabling, to our knowledge, interactive 4D-controllable streaming generation for the first time. More broadly, grounding generation in explicit 3D geometry with efficient causal inference points toward interactive world models with closed-loop spatiotemporal control, from controllable simulators to real-time visual imagination for embodied agents.

Generative models have advanced image-conditioned 3D content creation, yet generating controllable and executable 3D scenes from a single image remains challenging. Existing 3D generative approaches can synthesize visually plausible objects and scenes, but their spatial layout estimation is coupled with specific asset generators. They struggle to jointly model object semantics, metric geometry, and scene-level spatial relationships, which are essential for interactive editing, physical simulation, and embodied applications. We propose Fysiverse-3D-Vision, a unified vision-language-geometry framework for generative 3D scene reconstruction and executable asset construction from a single image. We establish a shared representation where spatial reasoning and geometric reconstruction mutually enhance each other, allowing object layouts to be inferred beyond the constraints of individual asset generators. Our model integrates textual supervision, semantic visual cues, and geometric representations within a unified Transformer to capture scene context, metric geometry, and object-level interactions. An object-conditioned layout module performs cross-attention between target object representations and global geometric features to predict object translation, rotation, and scale. Training progressively learns geometry-language alignment, introduces layout reasoning while preserving reconstruction capability, and refines physical consistency through collision-aware optimization. By separating spatial layout reasoning from asset synthesis, Fysiverse-3D-Vision provides an adaptable interface for interactive scene editing, object-level manipulations, and executable 3D content generation. Experiments demonstrate that our framework achieves superior geometric consistency, layout estimation, rendering quality, and physical property understanding compared with existing approaches.

Feynman famously asserted that interference is the only real mystery in quantum mechanics (QM). It is concluded that the reason for this mystery, and thereby the related mysteries of complementarity, non-commutativity of observables, the uncertainty principle and violation of Bell's equality, is that the axioms of QM depend vitally on the continuum nature of Hilbert Space, deemed unphysical. We develop a theory of quantum physics - Rational Quantum Mechanics (RaQM) - in which Hilbert Space is gravitationally discretised. The key to solving the mysteries of QM in RaQM is a number-theoretic property of the cosine function, concealed in QM when angles range over the continuum. This number-theoretic property describes mathematically the utter indivisibility of the quantum world and implies that the laws of physics are profoundly holistic. We contrast holism with nonlocality. In theories which embrace the continuum, the violation of Bell's inequality requires the laws of physics to be either nonlocal or not realistic; both incomprehensible concepts. By contrast, holism, as embodied in Mach's Principle or in the fractal geometry of a chaotic attractor, is neither incomprehensible nor unphysical. As part of this, we solve the deepest mystery of all; why nature makes use of complex numbers.

Recent advances in video world modeling have enabled large-scale generative models to simulate embodied environments with high visual fidelity, providing strong priors for prediction, planning, and control. Yet, despite their realism, these models often lack geometric grounding, limiting their use in navigation tasks that require spatial coherence and long-horizon stability. We introduce Reinforcement Learning with World Grounding (RLWG), a self-supervised post-training framework that aligns pretrained world models with a physically verifiable structure through geometric and perceptual rewards. Analogous to reinforcement learning from verifiable feedback (RLVR) in language models, RLWG can use multiple rewards that measure pose cycle-consistency, depth reprojection, and temporal coherence. We instantiate this framework with GrndCtrl, a reward-aligned adaptation method based on Group Relative Policy Optimization (GRPO), yielding world models that maintain stable trajectories, consistent geometry, and reliable rollouts for embodied navigation. Like post-training alignment in large language models, GrndCtrl leverages verifiable rewards to bridge generative pretraining and grounded behavior, achieving superior spatial coherence and navigation stability over supervised fine-tuning in outdoor environments.

Transformers have emerged as a universal backbone across 3D perception, video generation, and world models for autonomous driving and embodied AI, where understanding camera geometry is essential for grounding visual observations in three-dimensional space. However, existing camera encoding methods often rely on simplified pinhole assumptions, restricting generalization across the diverse intrinsics and lens distortions in real-world cameras. We introduce Relative Ray Encoding, a geometry-consistent representation that unifies complete camera information, including 6-DoF poses, intrinsics, and lens distortions. To evaluate its capability under diverse controllability demands, we adopt camera-controlled text-to-video generation as a testbed task. Within this setting, we further identify pitch and roll as two components effective for Absolute Orientation Encoding, enabling full control over the initial camera orientation. Together, these designs form UCPE (Unified Camera Positional Encoding), which integrates into a pretrained video Diffusion Transformer through a lightweight spatial attention adapter, adding less than 1% trainable parameters while achieving state-of-the-art camera controllability and visual fidelity. To facilitate systematic training and evaluation, we construct a large video dataset covering a wide range of camera motions and lens types. Extensive experiments validate the effectiveness of UCPE in camera-controllable video generation and highlight its potential as a general camera representation for Transformers across future multi-view, video, and 3D tasks. Code will be available at https://github.com/chengzhag/UCPE.

Vision-Language Models (VLMs) have advanced rapidly in multimodal perception and language understanding, yet it remains unclear whether they can reliably ground language into spatially coherent, plausibly executable actions in 3D digital environments. We introduce SleepWalk, a benchmark for evaluating instruction-grounded trajectory prediction in single-scene 3D worlds generated from textual scene descriptions and filtered for navigability. Unlike prior navigation benchmarks centered on long-range exploration across rooms, SleepWalk targets localized, interaction-centric embodied reasoning: given rendered visual observations and a natural-language instruction, a model must predict a trajectory that respects scene geometry, avoids collisions, and terminates at an action-compatible location. The benchmark covers diverse indoor and outdoor environments and organizes tasks into three tiers of spatial and temporal difficulty, enabling fine-grained analysis of grounding under increasing compositional complexity. Using a standardized pointwise judge-based evaluation protocol, we evaluate three frontier VLMs on 2,472 curated 3D environments with nine instructions per scene. Results reveal systematic failures in grounded spatial reasoning, especially under occlusion, interaction constraints, and multi-step instructions: performance drops as the difficulty level of the tasks increase. In general, current VLMs can somewhat produce trajectories that are simultaneously spatially coherent, plausibly executable, and aligned with intended actions. By exposing failures in a controlled yet scalable setting, SleepWalk provides a critical benchmark for advancing grounded multimodal reasoning, embodied planning, vision-language navigation, and action-capable agents in 3D environments.

Visual reasoning in multimodal large language models (MLLMs) has primarily been studied in static, fully observable settings, limiting their effectiveness in real-world environments where information is often incomplete due to occlusion or limited field of view. Humans, in contrast, actively explore and interact with their environment-moving, examining, and manipulating objects-to gather information through a closed-loop process integrating perception, reasoning, and action. Inspired by this human capability, we introduce the Active Visual Reasoning (AVR) task, extending visual reasoning to partially observable, interactive environments. AVR necessitates agents to: (1) actively acquire information via sequential physical actions, (2) integrate observations across multiple steps for coherent reasoning, and (3) dynamically adjust decisions based on evolving visual feedback. To rigorously evaluate AVR, we introduce CLEVR-AVR, a simulation benchmark featuring multi-round interactive environments designed to assess both reasoning correctness and information-gathering efficiency. We present AVR-152k, a large-scale dataset that offers rich Chain-of-Thought (CoT) annotations detailing iterative reasoning for uncertainty identification, action-conditioned information gain prediction, and information-maximizing action selection, crucial for training agents in a higher-order Markov Decision Process. Building on this, we develop PhysVLM-AVR, an MLLM achieving state-of-the-art performance on CLEVR-AVR, embodied reasoning (OpenEQA, RoboVQA), and passive visual reasoning (GeoMath, Geometry30K). Our analysis also reveals that current embodied MLLMs, despite detecting information incompleteness, struggle to actively acquire and integrate new information through interaction, highlighting a fundamental gap in active reasoning capabilities.

Humans often use visual aids, for example diagrams or sketches, when solving complex problems. Training multimodal models to do the same, known as Visual Chain of Thought (Visual CoT), is challenging due to: (1) poor off-the-shelf visual CoT performance, which hinders reinforcement learning, and (2) the lack of high-quality visual CoT training data. We introduce Zebra-CoT, a diverse large-scale dataset with 182,384 samples, containing logically coherent interleaved text-image reasoning traces. We focus on four categories of tasks where sketching or visual reasoning is especially natural, spanning scientific questions such as geometry, physics, and algorithms; 2D visual reasoning tasks like visual search and jigsaw puzzles; 3D reasoning tasks including 3D multi-hop inference, embodied and robot planning; visual logic problems and strategic games like chess. Fine-tuning the Anole-7B model on the Zebra-CoT training corpus results in an improvement of +12% in our test-set accuracy and yields up to +13% performance gain on standard VLM benchmark evaluations. Fine-tuning Bagel-7B yields a model that generates high-quality interleaved visual reasoning chains, underscoring Zebra-CoT's effectiveness for developing multimodal reasoning abilities. We open-source our dataset and models to support development and evaluation of visual CoT.

Recent advances in Vision-Language-Action (VLA) models have opened new avenues for robot manipulation, yet existing methods exhibit limited efficiency and a lack of high-level knowledge and spatial awareness. To address these challenges, we propose PokeVLA, a lightweight yet powerful foundation model for embodied manipulation that effectively infuses vision-language understanding into action learning. Our framework introduces a two-stage training paradigm: first, we pre-train a compact vision-language model (PokeVLM) on a curated multimodal dataset of 2.4M samples encompassing spatial grounding, affordance, and embodied reasoning tasks; second, we inject manipulation-relevant representations into the action space through multi-view goal-aware semantics learning, geometry alignment, and a novel action expert. Extensive experiments demonstrate state-of-the-art performance on the LIBERO-Plus benchmark and in real-world deployment, outperforming comparable baselines in success rate and robustness under diverse perturbations. To foster reproducibility and community progress, we will open-source our code, model weights, and the scripts for the curated pre-training dataset. Project page: https://getterupper.github.io/PokeVLA

Human-centric intelligence is evolving in the foundation-model era, with growing emphasis on scale, transferability, and general-purpose modeling. Yet it has not fully integrated with foundation models to achieve the comparable progress seen in them. More importantly, recent advances across this broad landscape remain fragmented across tasks, modalities, and research communities, leaving their intrinsic conceptual and methodological connections unclear. To bridge these divides and rethink human-centric intelligence in the foundation-model era, we introduce a full-spectrum human context taxonomy that integrates six interconnected levels by viewing humans as observable subjects through visual appearance and spatial geometry, as dynamic actors through kinematic dynamics and interaction modeling, and as situated agents through world simulation and embodied agency. We next present the methodological foundations of the field, covering human-centric data families, computational architecture paradigms, and representative training and inference optimization strategies. We then systematically review representative methods across these levels and organize the associated datasets, benchmarks, and evaluation metrics. We further discuss open challenges and promising research directions toward human-centric intelligence that is scalable, trustworthy, physically grounded, and deployable, aiming to provide a coherent framework and practical reference for advancing the field. Finally, we provide a systematically organized and continuously updated collection of human-centric AI literature and resources on our project page.

3D Scene Graphs (3DSGs) constitute a powerful representation of the physical world, distinguished by their abilities to explicitly model the complex spatial, semantic, and functional relationships between entities, rendering a foundational understanding that enables agents to interact intelligently with their environment and execute versatile behaviors. Embodied navigation, as a crucial component of such capabilities, leverages the compact and expressive nature of 3DSGs to enable long-horizon reasoning and planning in complex, large-scale environments. However, prior works rely on a static-world assumption, defining traversable space solely based on static spatial layouts and thereby treating interactable obstacles as non-traversable. This fundamental limitation severely undermines their effectiveness in real-world scenarios, leading to limited reachability, low efficiency, and inferior extensibility. To address these issues, we propose HERO, a novel framework for constructing Hierarchical Traversable 3DSGs, that redefines traversability by modeling operable obstacles as pathways, capturing their physical interactivity, functional semantics, and the scene's relational hierarchy. The results show that, relative to its baseline, HERO reduces PL by 35.1% in partially obstructed environments and increases SR by 79.4% in fully obstructed ones, demonstrating substantially higher efficiency and reachability.

Recent progress in generalizable embodied control has been driven by large-scale pretraining of Vision-Language-Action (VLA) models. However, most existing approaches rely on large collections of robot demonstrations, which are costly to obtain and tightly coupled to specific embodiments. Human videos, by contrast, are abundant and capture rich interactions, providing diverse semantic and physical cues for real-world manipulation. Yet, embodiment differences and the frequent absence of task-aligned annotations make their direct use in VLA models challenging. This survey provides a unified view of how human videos are transformed into effective knowledge for VLA models. We categorize existing approaches into four classes based on the action-related information they derive: (i) latent action representations that encode inter-frame changes; (ii) predictive world models that forecast future frames; (iii) explicit 2D supervision that extracts image-plane cues; and (iv) explicit 3D reconstruction that recovers geometry or motion. Beyond this taxonomy, we highlight three key open challenges in this area: structuring unstructured videos into training-ready episodes, grounding video-derived supervision into robot-executable actions under embodiment and viewpoint heterogeneity, and designing evaluation protocols that better predict real-world deployment performance and transfer efficiency, thereby informing future research directions. A curated list of papers and resources is available at https://github.com/AaronFengZY/HumanCentricToVLA-Survey.

Embodied intelligence has witnessed remarkable progress in recent years, driven by advances in computer vision, natural language processing, and the rise of large-scale multimodal models. Among its core challenges, robot manipulation stands out as a fundamental yet intricate problem, requiring the seamless integration of perception, planning, and control to enable interaction within diverse and unstructured environments. This survey presents a comprehensive overview of robotic manipulation, encompassing foundational background, task-organized benchmarks and datasets, and a unified taxonomy of existing methods. We extend the classical division between high-level planning and low-level control by broadening high-level planning to include language, code, motion, affordance, and 3D representations, while introducing a new taxonomy of low-level learning-based control grounded in training paradigms such as input modeling, latent learning, and policy learning. Furthermore, we provide the first dedicated taxonomy of key bottlenecks, focusing on data collection, utilization, and generalization, and conclude with an extensive review of real-world applications. Compared with prior surveys, our work offers both a broader scope and deeper insight, serving as an accessible roadmap for newcomers and a structured reference for experienced researchers. All related resources, including research papers, open-source datasets, and projects, are curated for the community at https://github.com/BaiShuanghao/Awesome-Robotics-Manipulation.

Embodied world models have emerged as a promising paradigm in robotics, most of which leverage large-scale Internet videos or pretrained video generation models to enrich visual and motion priors. However, they still face key challenges: a misalignment between coordinate-space actions and pixel-space videos, sensitivity to camera viewpoint, and non-unified architectures across embodiments. To this end, we present BridgeV2W, which converts coordinate-space actions into pixel-aligned embodiment masks rendered from the URDF and camera parameters. These masks are then injected into a pretrained video generation model via a ControlNet-style pathway, which aligns the action control signals with predicted videos, adds view-specific conditioning to accommodate camera viewpoints, and yields a unified world model architecture across embodiments. To mitigate overfitting to static backgrounds, BridgeV2W further introduces a flow-based motion loss that focuses on learning dynamic and task-relevant regions. Experiments on single-arm (DROID) and dual-arm (AgiBot-G1) datasets, covering diverse and challenging conditions with unseen viewpoints and scenes, show that BridgeV2W improves video generation quality compared to prior state-of-the-art methods. We further demonstrate the potential of BridgeV2W on downstream real-world tasks, including policy evaluation and goal-conditioned planning. More results can be found on our project website at https://BridgeV2W.github.io .

Humanoid robots that autonomously interact with physical environments over extended horizons represent a central goal of embodied intelligence. Existing approaches rely on reference motions or task-specific rewards, tightly coupling policies to particular object geometries and precluding multi-skill generalization within a single framework. A unified interaction representation enabling reference-free inference, geometric generalization, and long-horizon skill composition within one policy remains an open challenge. Here we show that Distance Field (DF) provides such a representation: LessMimic conditions a single whole-body policy on DF-derived geometric cues--surface distances, gradients, and velocity decompositions--removing the need for motion references, with interaction latents encoded via a Variational Auto-Encoder (VAE) and post-trained using Adversarial Interaction Priors (AIP) under Reinforcement Learning (RL). Through DAgger-style distillation that aligns DF latents with egocentric depth features, LessMimic further transfers seamlessly to vision-only deployment without motion capture (MoCap) infrastructure. A single LessMimic policy achieves 80--100% success across object scales from 0.4x to 1.6x on PickUp and SitStand where baselines degrade sharply, attains 62.1% success on 5 task instances trajectories, and remains viable up to 40 sequentially composed tasks. By grounding interaction in local geometry rather than demonstrations, LessMimic offers a scalable path toward humanoid robots that generalize, compose skills, and recover from failures in unstructured environments.

Embodied action planning is a core challenge in robotics, requiring models to generate precise actions from visual observations and language instructions. While video generation world models are promising, their reliance on pixel-level reconstruction often introduces visual redundancies that hinder action decoding and generalization. Latent world models offer a compact, motion-aware representation, but overlook the fine-grained details critical for precise manipulation. To overcome these limitations, we propose MoWM, a mixture-of-world-model framework that fuses representations from hybrid world models for embodied action planning. Our approach uses motion-aware representations from a latent model as a high-level prior, which guides the extraction of fine-grained visual features from the pixel space model. This design allows MoWM to highlight the informative visual details needed for action decoding. Extensive evaluations on the CALVIN benchmark demonstrate that our method achieves state-of-the-art task success rates and superior generalization. We also provide a comprehensive analysis of the strengths of each feature space, offering valuable insights for future research in embodied planning. The code is available at: https://github.com/tsinghua-fib-lab/MoWM.

Language models trained on large-scale vision-language data have demonstrated strong potential for embodied agents. Harnessing models through embodied tools use offers a promising alternative to end-to-end vision-language-action systems by combining high-level reasoning with external modules for perception, planning, and control. However, it remains unclear what makes an effective harness for embodied manipulation, and to what extent such a harness can unlock embodied capabilities in a wide range of reasoning models. In this work, we present Guava, a harness framework for embodied tool use developed through systematic exploration of the design space of agent workflows, action spaces, and observation spaces. Our study identifies three key ingredients for effective embodied agents: iterative perception-reasoning-action loops, semantic action abstractions, and multimodal observations. To understand whether these design principles are universal even to small models, we develop an end-to-end training pipeline that distills embodied manipulation capabilities into a 4B open-source model using fewer than 2K trajectories collected entirely in simulation. Experimental results in both simulation and real-world environments show performance comparable to frontier proprietary models while exhibiting strong generalization to unseen objects, novel instructions, and long-horizon tasks. Results suggest that a well-designed harness can serve as a scalable, model-agnostic interface for embodied manipulation, enabling strong emergent embodied capabilities in compact open-source models with minimal training data.

Spatial reasoning over three-dimensional scenes is a core capability for embodied intelligence, yet continuous model improvement remains bottlenecked by the cost of geometric annotation. The self-evolving paradigm offers a promising path, but its reliance on model consensus to construct pseudo-labels causes training to reinforce rather than correct the model's own geometric errors. We identify a property unique to 3D spatial reasoning that circumvents this limitation: ground truth is a deterministic consequence of the underlying geometry, computable exactly from point clouds and camera poses without any model involvement. Building on this insight, we present SpatialEvo, a self-evolving framework for 3D spatial reasoning, centered on the Deterministic Geometric Environment (DGE). The DGE formalizes 16 spatial reasoning task categories under explicit geometric validation rules and converts unannotated 3D scenes into zero-noise interactive oracles, replacing model consensus with objective physical feedback. A single shared-parameter policy co-evolves across questioner and solver roles under DGE constraints: the questioner generates physically valid spatial questions grounded in scene observations, while the solver derives precise answers against DGE-verified ground truth. A task-adaptive scheduler endogenously concentrates training on the model's weakest categories, producing a dynamic curriculum without manual design. Experiments across nine benchmarks demonstrate that SpatialEvo achieves the highest average score at both 3B and 7B scales, with consistent gains on spatial reasoning benchmarks and no degradation on general visual understanding.

The realization of Artificial General Intelligence (AGI) necessitates Embodied AI agents capable of robust spatial perception, effective task planning, and adaptive execution in physical environments. However, current large language models (LLMs) and multimodal LLMs (MLLMs) for embodied tasks suffer from key limitations, including a significant gap between model design and agent requirements, an unavoidable trade-off between real-time latency and performance, and the use of unauthentic, offline evaluation metrics. To address these challenges, we propose EmbodiedBrain, a novel vision-language foundation model available in both 7B and 32B parameter sizes. Our framework features an agent-aligned data structure and employs a powerful training methodology that integrates large-scale Supervised Fine-Tuning (SFT) with Step-Augumented Group Relative Policy Optimization (Step-GRPO), which boosts long-horizon task success by integrating preceding steps as Guided Precursors. Furthermore, we incorporate a comprehensive reward system, including a Generative Reward Model (GRM) accelerated at the infrastructure level, to improve training efficiency. For enable thorough validation, we establish a three-part evaluation system encompassing General, Planning, and End-to-End Simulation Benchmarks, highlighted by the proposal and open-sourcing of a novel, challenging simulation environment. Experimental results demonstrate that EmbodiedBrain achieves superior performance across all metrics, establishing a new state-of-the-art for embodied foundation models. Towards paving the way for the next generation of generalist embodied agents, we open-source all of our data, model weight, and evaluating methods, which are available at https://zterobot.github.io/EmbodiedBrain.github.io.

Recent methods for embodied instruction following are typically trained end-to-end using imitation learning. This often requires the use of expert trajectories and low-level language instructions. Such approaches assume that neural states will integrate multimodal semantics to perform state tracking, building spatial memory, exploration, and long-term planning. In contrast, we propose a modular method with structured representations that (1) builds a semantic map of the scene and (2) performs exploration with a semantic search policy, to achieve the natural language goal. Our modular method achieves SOTA performance (24.46 %) with a substantial (8.17 % absolute) gap from previous work while using less data by eschewing both expert trajectories and low-level instructions. Leveraging low-level language, however, can further increase our performance (26.49 %). Our findings suggest that an explicit spatial memory and a semantic search policy can provide a stronger and more general representation for state-tracking and guidance, even in the absence of expert trajectories or low-level instructions.

Long-horizon robot planning requires more than predicting what actions will do next; it also requires memory of the embodied experience that makes future goals interpretable. People do not plan from the present scene alone: they draw on remembered places, object-state changes, prior procedures, and regularities revealed through repeated action. We formulate Embodied Action Memory (EAM) as the capability to form, maintain, and use such experience as a persistent memory state for later decisions. MEMORA realizes EAM with a formation-consolidation-retrieval lifecycle and four typed stores: Environment Memory, Entity Memory, Activity Memory, and Inferred Knowledge. Online editing maintains object identities and state histories as new observations arrive; offline consolidation abstracts repeated experience into reusable procedures and participant-specific regularities. MEMORA-Bench evaluates this lifecycle on 45 hours of EPIC-KITCHENS-100 extension video across 18 participants through memory-grounded planning, including previously unseen goals, and a complementary memory-assessment task. Across four open-weight language models, full MEMORA--combining editing, typed stores, and consolidation--achieves the strongest aggregate results among the evaluated memory conditions. It improves memory-assessment accuracy by up to 20.5 points over the strongest controlled baseline and improves out-of-distribution Robot-Grounded Plan score by up to 16.6% relative. A qualitative two-task robot deployment study further illustrates how memory-grounded language plans can interface with downstream control, while the overall results show that editable, consolidated memory can supply remembered context for robot planning. Project page: https://yuzihaowashu.github.io/MEMORA/

Understanding a 3D scene immediately with its exploration is essential for embodied tasks, where an agent must construct and comprehend the 3D scene in an online and nearly real-time manner. In this study, we propose EmbodiedSplat, an online feed-forward 3DGS for open-vocabulary scene understanding that enables simultaneous online 3D reconstruction and 3D semantic understanding from the streaming images. Unlike existing open-vocabulary 3DGS methods which are typically restricted to either offline or per-scene optimization setting, our objectives are two-fold: 1) Reconstructs the semantic-embedded 3DGS of the entire scene from over 300 streaming images in an online manner. 2) Highly generalizable to novel scenes with feed-forward design and supports nearly real-time 3D semantic reconstruction when combined with real-time 2D models. To achieve these objectives, we propose an Online Sparse Coefficients Field with a CLIP Global Codebook where it binds the 2D CLIP embeddings to each 3D Gaussian while minimizing memory consumption and preserving the full semantic generalizability of CLIP. Furthermore, we generate 3D geometric-aware CLIP features by aggregating the partial point cloud of 3DGS through 3D U-Net to compensate the 3D geometric prior to 2D-oriented language embeddings. Extensive experiments on diverse indoor datasets, including ScanNet, ScanNet++, and Replica, demonstrate both the effectiveness and efficiency of our method. Check out our project page in https://0nandon.github.io/EmbodiedSplat/.

Geometrically faithful and functional articulated 3D assets are essential for real-to-sim robot manipulation, where policies trained in simulation must transfer to physical objects. Recent mesh-based methods learn to infer articulation from annotated 3D assets, but deployment remains challenging when real-world objects fall outside the training distribution or their meshes are incomplete or corrupted. To address these limitations, we formulate articulated asset reconstruction as programmatic modeling grounded in partial geometric evidence and introduce USDCraft, a framework in which a pretrained LLM writes and revises executable programs for simulation-ready articulated assets without task-specific training. We propose source geometry analysis, which converts the source mesh into a metric textual description that distinguishes observed surface from unknown space, and iterative geometric rechecking, which re-encodes each candidate in the same representation so that discrepancies point to program edits while unobserved regions remain open to completion. Visual feedback and physical authoring guidance complete the modeling process, which produces articulated USD assets with explicit physical properties that load into Isaac Sim without manual adjustment. Experiments demonstrate leading articulation recovery on two benchmarks and validate USDCraft's effectiveness for real-to-sim-to-real robot manipulation.

While multimodal large language models (MLLMs) have made groundbreaking progress in embodied intelligence, they still face significant challenges in spatial reasoning for complex long-horizon tasks. To address this gap, we propose EmbodiedVSR (Embodied Visual Spatial Reasoning), a novel framework that integrates dynamic scene graph-guided Chain-of-Thought (CoT) reasoning to enhance spatial understanding for embodied agents. By explicitly constructing structured knowledge representations through dynamic scene graphs, our method enables zero-shot spatial reasoning without task-specific fine-tuning. This approach not only disentangles intricate spatial relationships but also aligns reasoning steps with actionable environmental dynamics. To rigorously evaluate performance, we introduce the eSpatial-Benchmark, a comprehensive dataset including real-world embodied scenarios with fine-grained spatial annotations and adaptive task difficulty levels. Experiments demonstrate that our framework significantly outperforms existing MLLM-based methods in accuracy and reasoning coherence, particularly in long-horizon tasks requiring iterative environment interaction. The results reveal the untapped potential of MLLMs for embodied intelligence when equipped with structured, explainable reasoning mechanisms, paving the way for more reliable deployment in real-world spatial applications. The codes and datasets will be released soon.

Designing effective embodied multi-agent systems is critical for solving complex real-world tasks across domains. Due to the complexity of multi-agent embodied systems, existing methods fail to automatically generate safe and efficient training data for such systems. To this end, we propose the concept of compositional constraints for embodied multi-agent systems, addressing the challenges arising from collaboration among embodied agents. We design various interfaces tailored to different types of constraints, enabling seamless interaction with the physical world. Leveraging compositional constraints and specifically designed interfaces, we develop an automated data collection framework for embodied multi-agent systems and introduce the first benchmark for embodied multi-agent manipulation, RoboFactory. Based on RoboFactory benchmark, we adapt and evaluate the method of imitation learning and analyzed its performance in different difficulty agent tasks. Furthermore, we explore the architectures and training strategies for multi-agent imitation learning, aiming to build safe and efficient embodied multi-agent systems.

Multimodal foundation models learned to see and to speak by consuming the whole internet. Embodied agents admit no such shortcut, since they require data that couple observations with physical states and actions. These signals can be provided, to varying degrees, by multiple data sources. In this work, we organize the embodied data ecosystem as a "pyramid" spanning five complementary sources: real-robot data, UMI-style data, egocentric and exocentric data, simulation data, and general vision-language data. We organize the pyramid around the tension between scalability and robot alignment, and further characterize each source in terms of data quality, diversity, reusability, and physical fidelity. We then analyze recent embodied foundation models through the lens of their data recipes, examining how different sources are selected, aligned, and mixed during pretraining. For embodied brain models, vision-language-action models, and world-action models alike, we relate data composition to capabilities in perception, reasoning, planning, action generation, and world prediction. We close by discussing six open challenges: building large-scale tactile datasets, collecting failure and recovery data, developing scalable data-collection pipelines, aligning actions across embodiments, leveraging egocentric data for dexterous manipulation, and designing principled data recipes for robot learning. We hope this work paves the foundation for the design of next-generation embodied systems.

Artificial General Intelligence (AGI) is often envisioned as inherently embodied. With recent advances in robotics and foundational AI models, we stand at the threshold of a new era-one marked by increasingly generalized embodied AI systems. This paper contributes to the discourse by introducing a systematic taxonomy of Embodied AGI spanning five levels (L1-L5). We review existing research and challenges at the foundational stages (L1-L2) and outline the key components required to achieve higher-level capabilities (L3-L5). Building on these insights and existing technologies, we propose a conceptual framework for an L3+ robotic brain, offering both a technical outlook and a foundation for future exploration.

A fundamental challenge in embodied AI is verifying if agents build internal models of spatial structure or merely learn to mimic task-specific expert trajectories. This is critical as foundational approaches rooted in action-centric tasks (e.g., VLN) and reasoning-centric tasks (e.g., EQA) often share a common limitation: they lack a learning signal that forces them to encode fine-grained spatial relationships (like topology or distance) over long-range, fragmented experiences. To address this, we first propose LASAR, an architecture featuring a dual-memory system designed to maintain both episodic experiences and a semantic cognitive map. We then introduce Spatio-temporal Contextual Representation Learning (ST-CRL), a contrastive objective designed to train this architecture. ST-CRL leverages spatio-temporal cues from cognitive queries generated through annotated spatio-temporal context in simulation to build sample pairs, thereby forming the internal cognitive map from the agent's experiences. Experiments demonstrate that our method achieves 2\%-3.5\% gains in both zero-shot generalization on standard VLN-CE and VSI-Bench benchmarks. We also demonstrate that our proposed cognitive map has high self-consistency.

In the realm of computer vision and robotics, embodied agents are expected to explore their environment and carry out human instructions. This necessitates the ability to fully understand 3D scenes given their first-person observations and contextualize them into language for interaction. However, traditional research focuses more on scene-level input and output setups from a global view. To address the gap, we introduce EmbodiedScan, a multi-modal, ego-centric 3D perception dataset and benchmark for holistic 3D scene understanding. It encompasses over 5k scans encapsulating 1M ego-centric RGB-D views, 1M language prompts, 160k 3D-oriented boxes spanning over 760 categories, some of which partially align with LVIS, and dense semantic occupancy with 80 common categories. Building upon this database, we introduce a baseline framework named Embodied Perceptron. It is capable of processing an arbitrary number of multi-modal inputs and demonstrates remarkable 3D perception capabilities, both within the two series of benchmarks we set up, i.e., fundamental 3D perception tasks and language-grounded tasks, and in the wild. Codes, datasets, and benchmarks will be available at https://github.com/OpenRobotLab/EmbodiedScan.

We present AvatarReX, a new method for learning NeRF-based full-body avatars from video data. The learnt avatar not only provides expressive control of the body, hands and the face together, but also supports real-time animation and rendering. To this end, we propose a compositional avatar representation, where the body, hands and the face are separately modeled in a way that the structural prior from parametric mesh templates is properly utilized without compromising representation flexibility. Furthermore, we disentangle the geometry and appearance for each part. With these technical designs, we propose a dedicated deferred rendering pipeline, which can be executed in real-time framerate to synthesize high-quality free-view images. The disentanglement of geometry and appearance also allows us to design a two-pass training strategy that combines volume rendering and surface rendering for network training. In this way, patch-level supervision can be applied to force the network to learn sharp appearance details on the basis of geometry estimation. Overall, our method enables automatic construction of expressive full-body avatars with real-time rendering capability, and can generate photo-realistic images with dynamic details for novel body motions and facial expressions.

Embodied scene understanding requires not only comprehending visual-spatial information that has been observed but also determining where to explore next in the 3D physical world. Existing 3D Vision-Language (3D-VL) models primarily focus on grounding objects in static observations from 3D reconstruction, such as meshes and point clouds, but lack the ability to actively perceive and explore their environment. To address this limitation, we introduce \textbf{M}ove \textbf{t}o \textbf{U}nderstand (\model), a unified framework that integrates active perception with \textbf{3D} vision-language learning, enabling embodied agents to effectively explore and understand their environment. This is achieved by three key innovations: 1) Online query-based representation learning, enabling direct spatial memory construction from RGB-D frames, eliminating the need for explicit 3D reconstruction. 2) A unified objective for grounding and exploring, which represents unexplored locations as frontier queries and jointly optimizes object grounding and frontier selection. 3) End-to-end trajectory learning that combines Vision-Language-Exploration pre-training over a million diverse trajectories collected from both simulated and real-world RGB-D sequences. Extensive evaluations across various embodied navigation and question-answering benchmarks show that MTU3D outperforms state-of-the-art reinforcement learning and modular navigation approaches by 14\%, 23\%, 9\%, and 2\% in success rate on HM3D-OVON, GOAT-Bench, SG3D, and A-EQA, respectively. \model's versatility enables navigation using diverse input modalities, including categories, language descriptions, and reference images. These findings highlight the importance of bridging visual grounding and exploration for embodied intelligence.

A deep understanding of kinematic structures and movable components is essential for enabling robots to manipulate objects and model their own articulated forms. Such understanding is captured through articulated objects, which are essential for tasks such as physical simulation, motion planning, and policy learning. However, creating these models, particularly for objects with high degrees of freedom (DoF), remains a significant challenge. Existing methods typically rely on motion sequences or strong assumptions from hand-curated datasets, which hinders scalability. In this paper, we introduce Kinematify, an automated framework that synthesizes articulated objects directly from arbitrary RGB images or textual descriptions. Our method addresses two core challenges: (i) inferring kinematic topologies for high-DoF objects and (ii) estimating joint parameters from static geometry. To achieve this, we combine MCTS search for structural inference with geometry-driven optimization for joint reasoning, producing physically consistent and functionally valid descriptions. We evaluate Kinematify on diverse inputs from both synthetic and real-world environments, demonstrating improvements in registration and kinematic topology accuracy over prior work.

Recently, the concept of embodied intelligence has been widely accepted and popularized, leading people to naturally consider the potential for commercialization in this field. In this work, we propose a specific commercial scenario simulation, human-centered in-building embodied delivery. Furthermore, for this scenario, we have developed a brand-new virtual environment system from scratch, constructing a multi-level connected building space modeled after a polar research station. This environment also includes autonomous human characters and robots with grasping and mobility capabilities, as well as a large number of interactive items. Based on this environment, we have built a delivery dataset containing 13k language instructions to guide robots in providing services. We simulate human behavior through human characters and sample their various needs in daily life. Finally, we proposed a method centered around a large multimodal model to serve as the baseline system for this dataset. Compared to past embodied data work, our work focuses on a virtual environment centered around human-robot interaction for commercial scenarios. We believe this will bring new perspectives and exploration angles to the embodied community.

Embodied world models have emerged as a pivotal paradigm for visual robotic decision-making and interactive environment simulation. However, conventional embodied frameworks rely on low-dimensional structured action vectors (e.g., joint angles and end-effector poses), which suffer from limited expressive capacity, poor generalization across diverse embodiments, and unnatural dynamic modeling for complex physical interactions. To address these limitations, this paper proposesiMac (Image as Action Control), a novel unified control paradigm that treats raw visual images as native action representations for embodied world models. Departing from traditional explicit kinematic action encoding, iMac formulates continuous visual manipulation as image-based action tokens, which inherently encapsulate spatial motion intentions, interactive geometric constraints and subtle physical dynamics. We construct a dual-branch embodied architecture consisting of an image-action encoder and a dynamic world predictor: the encoder compresses target-driven visual images into compact action embeddings, while the predictor learns environment transition rules conditioned on image actions to achieve high-fidelity future state prediction and closed-loop embodied control. Extensive experiments are conducted on public embodied manipulation benchmarks and real-world robotic scenarios. The results demonstrate that iMac outperforms vector-based action control baselines in prediction accuracy, task success rate and cross-scene generalization ability. Moreover, our image-action design eliminates the reliance on manually defined action spaces, realizing flexible and universal control for heterogeneous embodied agents. This work provides an innovative visual-action perspective for embodied world models, offering a simple yet effective paradigm for scalable robotic perception and manipulation.

Large Language Models (LLMs) have demonstrated remarkable capabilities across various tasks, yet they face significant challenges in embodied task planning scenarios that require continuous environmental understanding and action generation. Existing approaches generate open-loop action scripts based on static knowledge, making it difficult to learn causal relationships between actions and environmental feedback, particularly in partially observable environments. We introduce Embodied Planner-R1, a novel outcome-driven reinforcement learning framework that enables LLMs to develop interactive capabilities through autonomous exploration with minimal supervision. Our framework incorporates three key innovations: (1) Without human annotations, we employ pure reinforcement learning with group rollout, incorporating in-environment interaction through parallel exploration; (2) completion-driven sparse reward; and (3) Interactive Policy Optimization (IPO) for efficient learning from grouped trajectories. Across two challenging text-based Embodied planning benchmarks, Embodied Planner-R1 achieves impressive completion rates of 97.78% on ALFWorld and 79.92% on ScienceWorld, surpassing prior methods by a large margin, and suffers only a -3.66% drop in previously unseen environments, evidencing strong generalization.

Scaling robotic foundation models requires diverse training data and reliable evaluation environments. Simulation offers a scalable solution, yet existing generation pipelines remain constrained by predefined assets and skills, a disconnect between scene generation and task generation, and limited support for complex embodiments and physics. We introduce EmbodiedSmith, a framework for scalable embodied data generation through recursive self-improvement (RSI). EmbodiedSmith unifies asset, scene, and task generation in a pipeline that supports autonomous creation and language-driven customization. Its core is an agentic refinement loop: scene generation anticipates downstream task requirements, while task generation guides targeted scene edits, allowing scenes and tasks to iteratively improve one another. This joint refinement improves task generation success, including for long-horizon tasks. The framework further supports mobile manipulators, humanoids, and dexterous hands, as well as interactions involving deformable objects and fluids, broadening the range of behaviors and physical phenomena represented in generated data. Together, these capabilities provide a flexible simulation engine for both robot pretraining and evaluation. Extensive experiments validate the quality, diversity, and generation efficiency of the resulting data, while downstream policy experiments demonstrate that increased data diversity improves generalization.

Embodied multimodal large models (EMLMs) have gained significant attention in recent years due to their potential to bridge the gap between perception, cognition, and action in complex, real-world environments. This comprehensive review explores the development of such models, including Large Language Models (LLMs), Large Vision Models (LVMs), and other models, while also examining other emerging architectures. We discuss the evolution of EMLMs, with a focus on embodied perception, navigation, interaction, and simulation. Furthermore, the review provides a detailed analysis of the datasets used for training and evaluating these models, highlighting the importance of diverse, high-quality data for effective learning. The paper also identifies key challenges faced by EMLMs, including issues of scalability, generalization, and real-time decision-making. Finally, we outline future directions, emphasizing the integration of multimodal sensing, reasoning, and action to advance the development of increasingly autonomous systems. By providing an in-depth analysis of state-of-the-art methods and identifying critical gaps, this paper aims to inspire future advancements in EMLMs and their applications across diverse domains.

Despite the ubiquity of large language models (LLMs) in AI research, the question of embodiment in LLMs remains underexplored, distinguishing them from embodied systems in robotics where sensory perception directly informs physical action. Our investigation navigates the intriguing terrain of whether LLMs, despite their non-embodied nature, effectively capture implicit human intuitions about fundamental, spatial building blocks of language. We employ insights from spatial cognitive foundations developed through early sensorimotor experiences, guiding our exploration through the reproduction of three psycholinguistic experiments. Surprisingly, correlations between model outputs and human responses emerge, revealing adaptability without a tangible connection to embodied experiences. Notable distinctions include polarized language model responses and reduced correlations in vision language models. This research contributes to a nuanced understanding of the interplay between language, spatial experiences, and the computations made by large language models. More at https://cisnlp.github.io/Spatial_Schemas/

World-model-based imagine-then-act becomes a promising paradigm for robotic manipulation, yet existing approaches typically support either purely image-based forecasting or reasoning over partial 3D geometry, limiting their ability to predict complete 4D scene dynamics. This work proposes a novel embodied 4D world model that enables geometrically consistent, arbitrary-view RGBD generation: given only a single-view RGBD observation as input, the model imagines the remaining viewpoints, which can then be back-projected and fused to assemble a more complete 3D structure across time. To efficiently learn the multi-view, cross-modality generation, we explicitly design cross-view and cross-modality feature fusion that jointly encourage consistency between RGB and depth and enforce geometric alignment across views. Beyond prediction, converting generated futures into actions is often handled by inverse dynamics, which is ill-posed because multiple actions can explain the same transition. We address this with a test-time action optimization strategy that backpropagates through the generative model to infer a trajectory-level latent best matching the predicted future, and a residual inverse dynamics model that turns this trajectory prior into accurate executable actions. Experiments on three datasets demonstrate strong performance on both 4D scene generation and downstream manipulation, and ablations provide practical insights into the key design choices.

Embodied agents operating in the physical world must make decisions that are not only effective but also safe, spatially coherent, and grounded in context. While recent advances in large multimodal models (LMMs) have shown promising capabilities in visual understanding and language generation, their ability to perform structured reasoning for real-world embodied tasks remains underexplored. In this work, we aim to understand how well foundation models can perform step-by-step reasoning in embodied environments. To this end, we propose the Foundation Model Embodied Reasoning (FoMER) benchmark, designed to evaluate the reasoning capabilities of LMMs in complex embodied decision-making scenarios. Our benchmark spans a diverse set of tasks that require agents to interpret multimodal observations, reason about physical constraints and safety, and generate valid next actions in natural language. We present (i) a large-scale, curated suite of embodied reasoning tasks, (ii) a novel evaluation framework that disentangles perceptual grounding from action reasoning, and (iii) empirical analysis of several leading LMMs under this setting. Our benchmark includes over 1.1k samples with detailed step-by-step reasoning across 10 tasks and 8 embodiments, covering three different robot types. Our results highlight both the potential and current limitations of LMMs in embodied reasoning, pointing towards key challenges and opportunities for future research in robot intelligence. Our data and code will be made publicly available.

Embodied agents require robust and comprehensive 3D spatiotemporal representations to support spatial reasoning, manipulation understanding, and downstream decision making. However, existing robot data are typically captured from fixed or sparse viewpoints, providing only partial and view-dependent observations, which limits multi-view perception and generalization across viewpoints. Given the difficulty of collecting additional viewpoints in real-world settings, we propose Embody4D, a dedicated video-to-video world model for embodied scenarios to bridge this observation gap by transforming a monocular robot video into novel-view videos from flexible target camera viewpoints. First, to tackle training data scarcity, we introduce a 3D-aware compositional synthesis pipeline to curate a heterogeneous dataset compositing cross-embodiment robotic arms with diverse backgrounds, promoting broad generalization. Second, to enforce geometric stability, we devise a latent confidence-aware expert modulation strategy, which estimates the reliability of warped latent priors and adaptively routes regions to copy, repair, or inpaint experts for spatiotemporally consistent 4D generation. Finally, to enhance the fidelity of the manipulation, we incorporate an interaction-aware attention mechanism that explicitly attends to the robotic interaction regions. Extensive experiments show that Embody4D achieves state-of-the-art performance on visual evaluation benchmarks, while both simulated and real-world robotic experiments further demonstrate its effectiveness as a robust data engine for synthesizing high-fidelity, view-consistent videos that empower downstream robotic planning and learning.