Daily Papers

Vision-language-action (VLA) policies based on flow matching generate action chunks through repeated evaluations of an action expert. Increasing the number of integration steps raises inference cost, but does not necessarily improve closed-loop success. We propose Coda, which reallocates part of this integration budget to a single learned endpoint correction. A frozen policy first completes a few-step noise-to-action trajectory; a lightweight Transformer then predicts a demonstration-supervised residual using the candidate action, source noise, and shared observation-prefix cache. Only the corrector is trained. On 50 RoboTwin Easy tasks, five-step Coda improves success from 71.64% to 74.68% over the matched five-step baseline, while reducing forward latency by 30.2% relative to the default ten-step policy. A two-step configuration achieves 71.88% success with a 2.12times speedup. An independent 13-task control shows a 5.69-percentage-point gain at nearly equal latency, supporting correction as an effective alternative to additional integration. The same design also improves frozen official SmolVLA, raising two-step success from 60.8% to 69.4%. These results show that endpoint correction improves the quality-latency trade-off of frozen flow-matching policies.

Existing approaches to controllable generation typically rely on fine-tuning, auxiliary networks, or test-time search. We show that flow matching admits a different control interface: adaptation through examples. For deterministic interpolants, the velocity field is solely governed by a conditional endpoint mean; shifting this mean shifts the flow itself. This yields a simple principle for controllable generation: steer a pretrained model by changing the reference set it follows. We instantiate this idea in two forms. Reference-Mean Guidance is training-free: it computes a closed-form endpoint-mean correction from a reference bank and applies it to a frozen FLUX.2-klein (4B) model, enabling control of color, identity, style, and structure while keeping the prompt, seed, and weights fixed. Semi-Parametric Guidance amortizes the same idea through an explicit mean anchor and learned residual refiner, matching unconditional DiT-B/4 quality on AFHQv2 while allowing the reference set to be swapped at inference time. These results point to a broader direction: generative models that adapt through data, not parameter updates.

Sampling latency compounds in diffusion workflows, where users generate and discard many candidates before keeping one. Surprisingly, the poor outputs of standard few-step samplers do not reflect a lack of reconstruction capacity: by optimizing only the initial noise, frozen 3-4-step samplers can closely reproduce their corresponding full-step outputs. Building on this finding, we learn corrections to the initial noise and denoising updates using endpoint supervision, improving correspondence with full-step outputs generated from the same noise and prompt. The resulting previews allow users to screen candidates cheaply and reserve full-step generation for promising ones. Input correction also transfers across sampling budgets without retraining. Experiments show substantial improvements in reference fidelity, including 53-78% lower reconstruction MSE than retrained LD3 on unconditional benchmarks, alongside improved ranking preservation and candidate selection on SD1.5, SDXL, and FLUX.1-dev.

Speech activity detection (or endpointing) is an important processing step for applications such as speech recognition, language identification and speaker diarization. Both audio- and vision-based approaches have been used for this task in various settings, often tailored toward end applications. However, much of the prior work reports results in synthetic settings, on task-specific datasets, or on datasets that are not openly available. This makes it difficult to compare approaches and understand their strengths and weaknesses. In this paper, we describe a new dataset which we will release publicly containing densely labeled speech activity in YouTube videos, with the goal of creating a shared, available dataset for this task. The labels in the dataset annotate three different speech activity conditions: clean speech, speech co-occurring with music, and speech co-occurring with noise, which enable analysis of model performance in more challenging conditions based on the presence of overlapping noise. We report benchmark performance numbers on AVA-Speech using off-the-shelf, state-of-the-art audio and vision models that serve as a baseline to facilitate future research.

End-to-end driving systems have recently made rapid progress, in particular on CARLA. Independent of their major contribution, they introduce changes to minor system components. Consequently, the source of improvements is unclear. We identify two biases that recur in nearly all state-of-the-art methods and are critical for the observed progress on CARLA: (1) lateral recovery via a strong inductive bias towards target point following, and (2) longitudinal averaging of multimodal waypoint predictions for slowing down. We investigate the drawbacks of these biases and identify principled alternatives. By incorporating our insights, we develop TF++, a simple end-to-end method that ranks first on the Longest6 and LAV benchmarks, gaining 14 driving score over the best prior work on Longest6.

Extending the context window of large language models typically requires training on sequences at the target length, incurring quadratic memory and computational costs that make long-context adaptation expensive and difficult to reproduce. We propose EndPrompt, a method that achieves effective context extension using only short training sequences. The core insight is that exposing a model to long-range relative positional distances does not require constructing full-length inputs: we preserve the original short context as an intact first segment and append a brief terminal prompt as a second segment, assigning it positional indices near the target context length. This two-segment construction introduces both local and long-range relative distances within a short physical sequence while maintaining the semantic continuity of the training text--a property absent in chunk-based simulation approaches that split contiguous context. We provide a theoretical analysis grounded in Rotary Position Embedding and the Bernstein inequality, showing that position interpolation induces a rigorous smoothness constraint over the attention function, with shared Transformer parameters further suppressing unstable extrapolation to unobserved intermediate distances. Applied to LLaMA-family models extending the context window from 8K to 64K, EndPrompt achieves an average RULER score of 76.03 and the highest average on LongBench, surpassing LCEG (72.24), LongLoRA (72.95), and full-length fine-tuning (69.23) while requiring substantially less computation. These results demonstrate that long-context generalization can be induced from sparse positional supervision, challenging the prevailing assumption that dense long-sequence training is necessary for reliable context-window extension. The code is available at https://github.com/clx1415926/EndPrompt.

Transformer language models build predictions through successive residual updates, but how their representations become specific to an eventual outcome remains unclear. We study this process by comparing intermediate residual states with their own final states and an empirical bank of final states from other contexts. Across six pretrained language models, the own endpoint becomes preferable to the average alternative early, while many individual endpoints remain closer. These competing sets generally shrink with depth, but their membership changes and their surviving endpoints need not become more similar to one another. Directional alignment and endpoint rank can therefore improve while Euclidean distance to the final state changes little. We develop a simple high-dimensional model that separates the roles of norm, alignment, and endpoint geometry, showing how gradual directional changes can produce sharp reductions in competition. We also prove that a straight path toward the own endpoint cannot introduce new competitors under either Euclidean or cosine distance; observed entries thus establish departures from straight-line convergence. Finally, endpoints associated with lower-ranked output tokens tend to lie farther away in cosine distance across all studied models, connecting residual geometry to output organization. Together, these findings characterize increasing geometric specificity during transformer inference and explain why distance, competitor count, and concentration of the surviving endpoints provide distinct views of that process.

Large Language Models (LLMs) present an intriguing avenue for exploration in the field of formal theorem proving. Nevertheless, their full potential, particularly concerning the mitigation of hallucinations and refinement through prover error messages, remains an area that has yet to be thoroughly investigated. To enhance the effectiveness of LLMs in the field, we introduce the Lyra, a new framework that employs two distinct correction mechanisms: Tool Correction (TC) and Conjecture Correction (CC). To implement Tool Correction in the post-processing of formal proofs, we leverage prior knowledge to utilize predefined prover tools (e.g., Sledgehammer) for guiding the replacement of incorrect tools. Tool Correction significantly contributes to mitigating hallucinations, thereby improving the overall accuracy of the proof. In addition, we introduce Conjecture Correction, an error feedback mechanism designed to interact with prover to refine formal proof conjectures with prover error messages. Compared to the previous refinement framework, the proposed Conjecture Correction refines generation with instruction but does not collect paired (generation, error & refinement) prompts. Our method has achieved state-of-the-art (SOTA) performance on both miniF2F validation (48.0% -> 55.3%) and test (45.5% -> 51.2%). We also present 3 IMO problems solved by Lyra. We believe Tool Correction (post-process for hallucination mitigation) and Conjecture Correction (subgoal adjustment from interaction with environment) could provide a promising avenue for future research in this field.

Point-adjustment (PA), for years the default scoring protocol in time-series anomaly detection (TSAD), was shown by Kim et al. (2022) to award near-perfect F1 to random anomaly scores. The field adopted a suite of replacement metrics (PA%K, range-based precision/recall, affiliation precision/recall, and Volume-Under-the-Surface, VUS, ROC/PR). We ask, independently and adversarially, whether these resist no-skill detectors on real benchmarks, and find the answer turns entirely on one overlooked variable: N, the number of random attempts an adversary reports the best of. Under a single honest run (N=1), not one replacement metric is gameable on any of six benchmarks (UCR, SMD, SMAP, MSL, NAB, PSM): a random detector reaches 90% of the best real detector's score on at most 11% of series for affiliation-F1, 5% for the ROC family, and 2% for the PR-based metrics and PA%K. But under best-of-N reporting, the seed-shopping endemic to ML, the metrics split sharply. affiliation-F1 and every ROC-based metric inflate steeply, affiliation crossing gameable (25% of series) by N=3 and reaching 0.98 at the full pool (N=41), the ROC family crossing by N=9-11; the PR-based metrics and PA%K stay near-flat at every N, floored near the anomaly prevalence (the lone exception is NAB at large N). A paired test finds VUS-ROC inflated on 131 series where its sibling VUS-PR is not, and never the reverse. The ROC-vs-PR split follows from the order-statistic behaviour of AUC under extreme class imbalance (a random PR-AUC is floored at prevalence); affiliation inflates by a second route, its extreme single-run leniency (already fragile at N=1). We release a pip-installable stress-test harness, and recommend reporting single-run scores or disclosing N and preferring PR-based metrics, which resist best-of-N inflation on nearly every benchmark.

When you merge two fine-tuned models from the same base checkpoint by simply averaging their weights, you implicitly assume their attention subspaces are still aligned. Recent work attempts to fix misalignments by learning an invertible correction matrix, M, for each model's query and key projections. This correction cancels out---using M on the query side and M^{-T} on the key side---right before the dot product. However, this cancellation is only exact if nothing sits between the projection and the dot product. In reality, almost all modern open-weight language models put a rotary position embedding (RoPE) exactly there. In this paper, we show that this cancellation is exact under RoPE if and only if M commutes with RoPE's per-position rotation. We derive the specific class of matrices where this holds: a scaled rotation acting independently within each RoPE frequency pair. This forms a strict, low-dimensional subset of the unconstrained matrices that current methods normally train. Building on this, we turn this constrained matrix class into a new merging method. While keeping the base weights entirely frozen, two fine-tunes each learn their own RoPE-compliant correction matrices. We optimize these corrections against a chosen blend ratio so the final result can be adjusted post-hoc like a dial, rather than locked into a single fixed merge. Our default approach trains at one fixed blend ratio, similar to how LoRA sets its scaling hyperparameter in advance. We also experiment with resampling the blend ratio randomly at every training step, and we report the results of both approaches.

Complete orthogonal predictive coordinates do not by themselves bind a latent direction to a named intervention. We present a mathematical and synthetic audit motivated by vascular device-vessel suitcordance. Capacity-matched least-squares predictors were exactly equivalent under complete fixed output transforms, whereas an anchor-only observer recovered interpretations only within the span of known perturbation signatures. Six three-dimensional configurations across 64 seeds gave a maximum paired prediction discrepancy of 6.7e-15 but a median untransported edit error of 1.513. Coordinate transport removed that error. Noisy and weak anchors constrained calibration stability, and changing the representation basis required recalibration or verified transport. Across 256 additional fits in dimensions 3-24, prediction equivalence persisted within 4.0e-15. We then evaluated nine deliberate runnable fault classes across 64 seeds. All 576 faulty executions completed, but each violated at least one reconstruction, prediction, delivered-edit or scope contract; all 320 valid control records passed. Repeating a faulty implementation gave exact self-agreement despite error against the separately computed simulator expectation. For one omitted-direction defect, probe coverage followed its analytic law, and rank-aware abstention protected unsupported interpretations. Scalar-noise experiments exposed both missed weak faults and excessive rejection under narrow relative tolerances. These controls provide an executable separation of prediction, semantic support and scientific acceptance. They are synthetic numerical audits, not clinical validation, neural JEPA-Anything replication, agent learning or patient treatment-effect estimation.

We present Generative Anchored Fields (GAF), a generative model that learns independent endpoint predictors, J (noise) and K (data), from any point on a linear bridge. Unlike existing approaches that use a single trajectory or score predictor, GAF is trained to recover the bridge endpoints directly via coordinate learning. The velocity field v=K-J emerges from their time-conditioned disagreement. This factorization enables Transport Algebra: algebraic operations on multiple J/K heads for compositional control. With class-specific K_n heads, GAF defines directed transport maps between a shared base noise distribution and multiple data domains, allowing controllable interpolation, multi-class composition, and semantic editing. This is achieved either directly on the predicted data coordinates (K) using Iterative Endpoint Refinement (IER), a novel sampler that achieves high-quality generation in 5-8 steps, or on the emergent velocity field (v). We achieve strong sample quality (FID 7.51 on ImageNet 256times256 and 7.27 on CelebA-HQ 256times 256, without classifier-free guidance) while treating compositional generation as an architectural primitive. Code available at https://github.com/IDLabMedia/GAF.

Established sampling protocols for 3D point cloud learning, such as Farthest Point Sampling (FPS) and Fixed Sample Size (FSS), have long been relied upon. However, real-world data often suffer from corruptions, such as sensor noise, which violates the benign data assumption in current protocols. As a result, these protocols are highly vulnerable to noise, posing significant safety risks in critical applications like autonomous driving. To address these issues, we propose an enhanced point cloud sampling protocol, PointSP, designed to improve robustness against point cloud corruptions. PointSP incorporates key point reweighting to mitigate outlier sensitivity and ensure the selection of representative points. It also introduces a local-global balanced downsampling strategy, which allows for scalable and adaptive sampling while maintaining geometric consistency. Additionally, a lightweight tangent plane interpolation method is used to preserve local geometry while enhancing the density of the point cloud. Unlike learning-based approaches that require additional model training, PointSP is architecture-agnostic, requiring no extra learning or modification to the network. This enables seamless integration into existing pipelines. Extensive experiments on synthetic and real-world corrupted datasets show that PointSP significantly improves the robustness and accuracy of point cloud classification, outperforming state-of-the-art methods across multiple benchmarks.

While low-latency interaction is critical for spoken dialogue, cascaded architectures are often bottlenecked by reactive turn-completion detection. We propose Endpoint Anticipation, shifting from reactive detection to proactive forecasting of end-of-turn signals. Our speech-based model anticipates endpoints upto 2.56 seconds in advance, enabling speculative execution of LLM and TTS pipelines on partial context. We introduce metrics to quantify the trade-off between realized latency reduction and computational redundancy. Evaluation across conversational and task-oriented datasets shows our model consistently outperforms competitive VAP-based baselines. Integration with the Unmute framework demonstrates a 505 ms average latency reduction with a 28.4% increase in speculative computation, effectively masking sequential bottlenecks to enable complex reasoning in real-time speech-to-speech interaction.

We introduce Point4D, a feed-forward model for 4D reconstruction of long-range video sequences. Point4D is able to reliably infer dense per-point 3D trajectories across multi-hundred-frame videos, unlike existing 4D methods that are limited to short input windows of at most a few dozen frames. A key innovation that enables this is our flexible 3D query-based motion decoder that decouples trajectory prediction from image-plane visibility. The predicted 3D endpoints are then directly re-queried in the next chunk without re-projection or matching. Furthermore, we show that extracting and reusing a visual descriptor from an arbitrary frame where the point is visible leads to better performance than relying solely on the source patch. Overall, Point4D achieves state-of-the-art performance across diverse long-video tracking benchmarks spanning over 200 frames and largely outperforms previous feed-forward 4D method. Project page: https://point-4d.github.io

Research agents explain planned experiments. We measure predictive credit with paired forecasts sharing an intervention, forecaster, and outcome while varying description, matched explanation, and donor context. Five checks track commitment, delivery, predictive gain, alignment, and known-signal uptake. Across 336 prospective states in controlled learning, 12 Tox21 endpoints, and 24 OpenML tasks, v5's frozen credit decision was inconclusive. Tox21's preregistered ROC AUC interval-score harm test was unmet (D-M=-.0026, 95 percent interval [-.0174, .0104]); OpenML's joint formation, point-equivalence, and repeatability rule was unmet. Matched point-accuracy gains over description remained unconfirmed, and Tox21/OpenML seed-donor intervals spanned zero. Under requested DeepSeek V4 Pro, matched and donor cards reduced secondary Tox21 drift by 64.5 and 59.1 percent. A DeepSeek V4 Flash replay raised matched point MAE from .01823 to .02020 and missed matched-donor interval-score equivalence. OpenML full-card assignment widened nominal 80 percent intervals by 21 percent, with 49.3 percent coverage versus 51.4 percent for description and content in 66/144 cards. Direct-text Flash delivered all 144 notes without detectable matched point-accuracy gain. A researcher-authored mechanism positive control lowered point MAE by 2.60 percentage points versus description. The protocol measures predictive credit for research-agent benchmarks and scientific forecasting; natural-explanation credit remained unconfirmed at the tested donor resolutions.

Do LLM scientific agents rely only on their initial task context, or do they adapt their decisions in response to experimental feedback? We study this question in neural operator adaptation, where a large language model (LLM) selects fine-tuning configurations under a limited trial budget. Across transfers within and between partial differential equation (PDE) families, the LLM achieves lower held-out test nRMSE than random search and Bayesian optimisation in nearly every matched comparison. Endpoint performance alone cannot distinguish what happens, so we verify each attribution with controlled interventions. Before observing any validation score, the LLM's first configuration already ranks near the top of the corresponding random-search pool, indicating a useful initial bias. A complementary cold-start intervention shows that the selected base learning rate shifts with the PDE description. Once feedback becomes available, reassigning validation scores among evaluated configurations changes the next proposal in every case tested, whereas a value-preserving rewrite produces no comparable aggregate effect. These interventions establish that the LLM's decision-level actions respond to the given task and observed outcomes, showing that it combines a task-dependent prior with sensitivity to experimental feedback.

Denoising diffusion models have enabled high-quality image generation and editing. We present a method to localize the desired edit region implicit in a text instruction. We leverage InstructPix2Pix (IP2P) and identify the discrepancy between IP2P predictions with and without the instruction. This discrepancy is referred to as the relevance map. The relevance map conveys the importance of changing each pixel to achieve the edits, and is used to to guide the modifications. This guidance ensures that the irrelevant pixels remain unchanged. Relevance maps are further used to enhance the quality of text-guided editing of 3D scenes in the form of neural radiance fields. A field is trained on relevance maps of training views, denoted as the relevance field, defining the 3D region within which modifications should be made. We perform iterative updates on the training views guided by rendered relevance maps from the relevance field. Our method achieves state-of-the-art performance on both image and NeRF editing tasks. Project page: https://ashmrz.github.io/WatchYourSteps/

LiDAR point clouds often contain motion-induced distortions, degrading the accuracy of object appearances in the captured data. In this paper, we first characterize the underlying reasons for the point cloud distortion and show that this is present in public datasets. We find that this distortion is more pronounced in high-speed environments such as highways, as well as in multi-LiDAR configurations, a common setup for heavy vehicles. Previous work has dealt with point cloud distortion from the ego-motion but fails to consider distortion from the motion of other objects. We therefore introduce a novel undistortion pipeline, HiMo, that leverages scene flow estimation for object motion compensation, correcting the depiction of dynamic objects. We further propose an extension of a state-of-the-art self-supervised scene flow method. Due to the lack of well-established motion distortion metrics in the literature, we also propose two metrics for compensation performance evaluation: compensation accuracy at a point level and shape similarity on objects. To demonstrate the efficacy of our method, we conduct extensive experiments on the Argoverse 2 dataset and a new real-world dataset. Our new dataset is collected from heavy vehicles equipped with multi-LiDARs and on highways as opposed to mostly urban settings in the existing datasets. The source code, including all methods and the evaluation data, will be provided upon publication. See https://kin-zhang.github.io/HiMo for more details.

Latent world models are judged by how well they predict, so when planning fails at long horizons the natural reading is that the predictor degrades. On a reproduction of LeWorldModel on TwoRoom we show the binding constraint is the planner's objective instead. The predictor is not the limit: its imagined state seventy-five environment steps ahead is still only 0.189 as wrong as assuming the world froze, while the planner never imagines beyond twenty-five. The objective is. Cross-entropy-method planning minimises squared latent distance, which tracks true distance at r = 0.426, saturates by about eighty arena units and decreases beyond a hundred and twenty, so moving away from the goal can lower the cost. The information is present throughout: a ridge probe recovers position from the frozen embedding at R^2 0.9922. The pathology is the method's, not one reimplementation's. It is present in the authors' released weights, and across four checkpoints long-horizon success rank-orders exactly with metric quality and inversely with prediction accuracy. Replacing only the objective, with nothing retrained and no GPU, lifts goals reached at offset 100 from 26.0% to 98.0%, equals the 98.0% at offset 25, and reaches 92.0% under a third of the budget: planning stops depending on the horizon. The best cost is not the most accurate. A head learned from frame separation alone predicts spatial distance worse than a position probe (r = 0.819 against 0.9897) yet plans better, charging 24% more to cross the environment's dividing wall where squared latent distance charges 4% less. It has learned reachability, not proximity.

Natural turn-taking in full-duplex voice interaction requires determining from partial speech whether a pause reflects hesitation or a completed conversational intent. Acoustic voice activity detection lacks this semantic information, while cascaded ASR-based endpointing introduces transcription dependence and additional processing stages. We formulate semantic endpoint detection as a causal audio-language reasoning task and introduce FD-VAD, an ASR-free streaming endpointer that maps bounded causal audio windows directly to Continue/Stop decisions. FD-VAD combines a frozen speech encoder with a lightweight modality adapter and a parameter-efficiently adapted language model, using a last-chunk training objective for streaming inference. We further introduce confidence-gated endpoint commitment to control interruption versus delay and boundary-focused hard-negative sampling to improve decisions around ambiguous turn boundaries. Across in-domain and conversational evaluations, FD-VAD outperforms strong streaming and non-streaming semantic turn classifiers, and achieves the highest EOT recall among qualifying systems on TurnBench dev set 0.853 (at FP<=0.10) in a zero-shot setting. These results show that semantic endpointing can be performed directly from streaming audio without intermediate ASR or dialogue state tracking.

Post-hoc calibration corrects reported confidence, yet a multiclass calibrator can also change the associated top-1 prediction. Accuracy captures only the net effect of these changes on correctness, not how often predictions change; the Top-1 Prediction Change Rate (TPCR) instead measures this frequency. We propose Calibrator-Output Repair for Top-1 Decision Preservation (CORD), the first post-fit adapter to impose exact prediction preservation by repairing the full calibrated probability vector. From the original and calibrated outputs alone, CORD determines the mass assigned to the original top-1. The calibrated conditional distribution allocates the remaining mass over the other classes, yielding a repaired vector whose own argmax recovers the original prediction. On the calibration split, CORD coordinates the repaired masses to retain the calibrated outputs' mean mass on original predictions whenever attainable. The adapter alters neither the fitted calibrator nor its direct output, fits no additional supervised map, and requires no user- or validation-tuned hyperparameter. Across CIFAR-10/100 and ImageNet-1K, CORD attains zero TPCR by construction and lowers mean ECE, NLL, and Brier relative to the corresponding direct outputs in every dataset; paired gains persist under distribution shift and across calibration-set sizes. CORD thus removes the preservation constraint from calibrator fitting and assigns exact recovery of the original decision to subsequent output repair. Our code is available at https://github.com/labhai/CORD.

Despite the recent advancements in abstractive summarization systems leveraged from large-scale datasets and pre-trained language models, the factual correctness of the summary is still insufficient. One line of trials to mitigate this problem is to include a post-editing process that can detect and correct factual errors in the summary. In building such a post-editing system, it is strongly required that 1) the process has a high success rate and interpretability and 2) has a fast running time. Previous approaches focus on regeneration of the summary using the autoregressive models, which lack interpretability and require high computing resources. In this paper, we propose an efficient factual error correction system RFEC based on entities retrieval post-editing process. RFEC first retrieves the evidence sentences from the original document by comparing the sentences with the target summary. This approach greatly reduces the length of text for a system to analyze. Next, RFEC detects the entity-level errors in the summaries by considering the evidence sentences and substitutes the wrong entities with the accurate entities from the evidence sentences. Experimental results show that our proposed error correction system shows more competitive performance than baseline methods in correcting the factual errors with a much faster speed.

Current paradigms for training language models via reinforcement learning rely heavily on sparse outcome rewards. However, as we pursue tasks that require longer and more complicated trajectories, such strategies result in slow learning. Prior work has attempted to address this problem by rewarding partial progress; however, naive formulations are often biased and converge to suboptimal policies. We show that a simple and unbiased dense reward formulation, which we term progressive point matching, scales exponentially more efficiently to long-horizon tasks by rewarding partial progress on a segment level, both theoretically and empirically via synthetic environments. We then show how progressive point matching can be practically instantiated using a single reference trajectory per task. On extremely hard math reasoning problems, sparse outcome rewards cannot make any progress, whereas segment-level rewards enable improvements at larger test-time token budgets when measured by success rate or pass@k.

How strongly do the remaining diffusion-sampling steps amplify a perturbation at a late latent state? Standard measurements answer this question with newly sampled isotropic noise, even though perturbations encountered during sampling have already been transformed by earlier steps. We compare these two cases directly. For each trajectory, we transport a centered perturbation from an earlier step to a late state, then replay its direction at the same magnitude as a newly sampled isotropic perturbation; both then undergo the same remaining updates. Across the samplers we study, median paired shaped-to-fresh angular-gain ratios range from 1.14 to 2.35. Shaped angular gain exceeds its matched fresh counterpart in every trajectory in the original main cohorts. The same pattern appears when endpoint change is measured by latent RMS. The effect also appears in perceptual feature representations: earlier-sampling directions cause larger feature changes at the endpoint, even when the corresponding pixel-space change is comparable. Permuting shaped directions across trajectories weakens the effect, including within class, indicating that the advantage depends on alignment with the receiving trajectory as well as on shared directional structure.

Tagged magnetic resonance imaging (tMRI) has been employed for decades to measure the motion of tissue undergoing deformation. However, registration-based motion estimation from tMRI is difficult due to the periodic patterns in these images, particularly when the motion is large. With a larger motion the registration approach gets trapped in a local optima, leading to motion estimation errors. We introduce a novel "momenta, shooting, and correction" framework for Lagrangian motion estimation in the presence of repetitive patterns and large motion. This framework, grounded in Lie algebra and Lie group principles, accumulates momenta in the tangent vector space and employs exponential mapping in the diffeomorphic space for rapid approximation towards true optima, circumventing local optima. A subsequent correction step ensures convergence to true optima. The results on a 2D synthetic dataset and a real 3D tMRI dataset demonstrate our method's efficiency in estimating accurate, dense, and diffeomorphic 2D/3D motion fields amidst large motion and repetitive patterns.

We use EDGES measurements to determine scale and zero-level corrections to the diffuse radio surveys by Guzmán et al. at 45 MHz and Landecker & Wielebinski at 150 MHz. We find that the Guzmán et al. map requires a scale correction of 1.076 pm 0.034 (2σ) and a zero-level correction of -160 pm 78 K (2σ) to best-fit the EDGES data. For the Landecker & Wielebinski map, the scale correction is 1.112 pm 0.023 (2σ) and the zero-level correction is 0.7 pm 6.0 K (2σ). The correction uncertainties are dominated by systematic effects, of which the most significant are uncertainty in the calibration of the EDGES receivers, antenna pointing, and tropospheric and ionospheric effects. We propagate the correction uncertainties to estimate the uncertainties in the corrected maps themselves and find that the 2σ uncertainty in the map brightness temperature is in the range 3.2-7.5% for the Guzmán et al. map and 2.1-9.0% for the Landecker & Wielebinski map, with the largest percent uncertainties occurring at high Galactic latitudes. The corrected maps could be used to improve existing diffuse low-frequency radio sky models, which are essential tools in analyses of cosmological 21 cm observations, as well as to investigate the existence of a radio monopole excess above the cosmic microwave background and known Galactic and extragalactic contributions.

AI evaluation can support the wrong inference when an in-domain benchmark success does not survive distribution shift, or when the benchmark endpoint is entangled with a design factor. We study this problem in CRISPRi perturbation-effect prediction, evaluating a frozen Geneformer representation under a locked, pre-registered protocol: heads and model selection were frozen before test evaluation; the protocol required external outcome labels to remain withheld until final unblinding; and analysis-governing decisions were fixed before the evaluations they govern. In-distribution on the Virtual Cell Challenge (VCC), the frozen representation carries measurable predictive information beyond a dimension-matched random-feature control (Delta R^2 = +0.1645, 95% CI [+0.1375, +0.1920]), satisfying the pre-registered informativeness gate required before interpreting transfer. It then fails zero-shot transfer on both external screens (Spearman rho = -0.139 and -0.267), lying below that control on each. Adding a predefined magnitude block improves the representation externally (Delta rho = +0.032 and +0.143) but, under the frozen primary head, does not rescue transfer: both remain negative. A pre-registered, count-adjusted max-response secondary is positively associated with the outcome on both screens; we report it as correlational and secondary, not as a recovered magnitude signal. Finally, the VCC endpoint is strongly sample-size associated: a count-only linear model reaches R^2 = +0.4325, versus +0.2589 for the four magnitude scalars; adding those scalars to cell count improves R^2 by only +0.0017, so much of the aggregate-magnitude signal overlaps with cell count. This case study shows how locking the evaluation, harmonizing the measured endpoint, and separating primary from secondary evidence can change the inference supported by an AI benchmark.

We investigate how looped transformers encode human preference, training lightweight evaluator heads on frozen Ouro-2.6B loop-iteration states on Anthropic HH-RLHF. v2: an erratum is prepended; the original manuscript is unchanged. A post-publication audit found the three headline results inflated by two independent evaluation errors. The 95.2% pairwise evaluator accuracy is a canonical-ordering artifact: the data were correctly split, but the evaluator learned to prefer the first-presented argument; its strict antisymmetrized accuracy on the full 8,552-pair test set is 63.9%. The 84.5% pairwise probe and the below-chance 21.75% pointwise probe were source-item leaks (orientation rows and pair partners crossing the train/test split); corrected pair-disjoint values are 56.5% and 54.2% -- above chance, so the "inverted polarity" finding is withdrawn. The central finding survives at much smaller magnitude: preference is decoded more accurately relationally than pointwise (paired +2.3 points, 95% CI [+1.3, +3.3]), and the antisymmetrized evaluator still beats the linear probe, but no corrected readout rivals end-to-end reward models. The methodological findings stand (constant-output degeneracy, flip test, swap-protocol metric deflation), with one correction: antisymmetrized accuracy, not antisymmetry correlation, certifies relational discrimination. The two errors are mutually invisible -- a split audit cannot see an ordering prior, antisymmetrization cannot see a leak -- so both checks are required. Full audit in the follow-up work (Kirin, 2026, in preparation).

Generating accurate 3D reconstructions from endoscopic video is a promising avenue for longitudinal radiation-free analysis of sinus anatomy and surgical outcomes. Several methods for monocular reconstruction have been proposed, yielding visually pleasant 3D anatomical structures by retrieving relative camera poses with structure-from-motion-type algorithms and fusion of monocular depth estimates. However, due to the complex properties of the underlying algorithms and endoscopic scenes, the reconstruction pipeline may perform poorly or fail unexpectedly. Further, acquiring medical data conveys additional challenges, presenting difficulties in quantitatively benchmarking these models, understanding failure cases, and identifying critical components that contribute to their precision. In this work, we perform a quantitative analysis of a self-supervised approach for sinus reconstruction using endoscopic sequences paired with optical tracking and high-resolution computed tomography acquired from nine ex-vivo specimens. Our results show that the generated reconstructions are in high agreement with the anatomy, yielding an average point-to-mesh error of 0.91 mm between reconstructions and CT segmentations. However, in a point-to-point matching scenario, relevant for endoscope tracking and navigation, we found average target registration errors of 6.58 mm. We identified that pose and depth estimation inaccuracies contribute equally to this error and that locally consistent sequences with shorter trajectories generate more accurate reconstructions. These results suggest that achieving global consistency between relative camera poses and estimated depths with the anatomy is essential. In doing so, we can ensure proper synergy between all components of the pipeline for improved reconstructions that will facilitate clinical application of this innovative technology.

Conversational memory changes during use, so endpoint question answering alone cannot establish how a persistent state accumulates, ages, or incorporates revisions. We introduce LSREP, a Longitudinal State-Replay Evaluation Protocol combining ordered replay, explicit lifecycle schedules, repeated probes, evolving reference answers, and mechanism-fidelity checks. Its architectural case study is ICE v2, a local-first memory middleware with typed stores, retrieval fusion, and dynamic context budgets. The private, single-user instantiation contains 1,985 turns, 219 distinct probes, and 1,211 probe-checkpoint observations across 52 checkpoints. On three ordinary-density datasets, ICE v2 has a near-zero mean quality difference from vector-RAG while selecting 32% fewer fragments but using 6.6% more estimated prompt tokens. A fourth, dense dataset exposes catastrophic failures of the unbudgeted baseline. The fidelity audit limits attribution: procedural retrieval is defective, several mechanisms are unexercised, and graph utility is not established. In a complementary matched public diagnostic, ICE v2 loses decisively to pure vector-RAG on LongMemEval: 50.8% versus 72.8% in the evidence-only oracle and 43.0% versus 69.5% in full-S. Paired differences are -22.0 points (95% CI [-26.6, -17.4]) and -26.5 ([-31.3, -21.8]). Conservative abstention accompanies severe multi-session and temporal failures. ICE uses less context in this diagnostic, establishing a quality-cost trade-off rather than superior efficiency. Together, replay, fidelity auditing, and public endpoint testing expose distinct failure modes that neither architectural descriptions nor aggregate scores identify alone.

The stereo correspondence and reconstruction of endoscopic data sub-challenge was organized during the Endovis challenge at MICCAI 2019 in Shenzhen, China. The task was to perform dense depth estimation using 7 training datasets and 2 test sets of structured light data captured using porcine cadavers. These were provided by a team at Intuitive Surgical. 10 teams participated in the challenge day. This paper contains 3 additional methods which were submitted after the challenge finished as well as a supplemental section from these teams on issues they found with the dataset.

One of the main challenges in LiDAR-based 3D object detection is that the sensors often fail to capture the complete spatial information about the objects due to long distance and occlusion. Two-stage detectors with point cloud completion approaches tackle this problem by adding more points to the regions of interest (RoIs) with a pre-trained network. However, these methods generate dense point clouds of objects for all region proposals, assuming that objects always exist in the RoIs. This leads to the indiscriminate point generation for incorrect proposals as well. Motivated by this, we propose Point Generation R-CNN (PG-RCNN), a novel end-to-end detector that generates semantic surface points of foreground objects for accurate detection. Our method uses a jointly trained RoI point generation module to process the contextual information of RoIs and estimate the complete shape and displacement of foreground objects. For every generated point, PG-RCNN assigns a semantic feature that indicates the estimated foreground probability. Extensive experiments show that the point clouds generated by our method provide geometrically and semantically rich information for refining false positive and misaligned proposals. PG-RCNN achieves competitive performance on the KITTI benchmark, with significantly fewer parameters than state-of-the-art models. The code is available at https://github.com/quotation2520/PG-RCNN.

When a steering intervention changes a language model's behavior, which part of the intervention deserves the credit? We test this question for a target-centered, scaled conceptor complement by removing its fitted covariance filter while preserving the same target-specific center and gain. At the original aperture α=.05 and gain β=2, all 21 fitted maps across three models and seven targets expand every direction at the generation intervention layers. The matrix correction is 0.093%--7.815% of the matched-control displacement on held-out extraction activations. In 480 paired comparisons within a 1,920-response study, retaining the matrix changes many individual texts but does not establish a consistent additional target-suppression benefit on the four-target panel. A geometric aperture sweep shows that the operating regime changes with the filter setting. Separately, an invertible soft filter preserves what an unrestricted affine readout can recover, whereas dedicated erasure methods reduce prediction by newly fitted probes. Together, the results show why a whole-intervention comparison cannot by itself attribute generated behavior to the fitted matrix: analyze the complete transformation, hold shared components fixed, and test its output consequences directly.

The antenna-elements that make up a radio interferometer form a spatial filter that samples components of the Fourier transform of a target radio astronomical source brightness. Along the signal path, there are multiplicative and additive perturbation effects that alter the signal and that should be corrected. The process of mitigating these perturbation effects is called calibration. In this work, we develop a new and fast Maximum Likelihood based estimator of these perturbation effects using the Exponential Map and Lie groups. To evaluate its performance, we compare it to the Cramér-Rao Lower Bound and, to test the estimation time, we compare it with the Expectation Maximization algorithm, another fast Maximum Likelihood estimator. Finally, we apply our estimator to a real observation of the protoplanetary disk AS 209 made with the Submillimeter Array. We found that our proposed estimator meets the Cramér-Rao Lower Bound and it was approximately 40 times faster than the Expectation Maximization algorithm.

Language models (LMs) are susceptible to in-context reward hacking, where they exploit flaws in tainted or faulty written specifications or rubrics to achieve high scores without fulfilling the user's true intent. We introduce Specification Self-Correction (SSC), a novel, test-time framework that enables an LM to identify and correct flaws within its own guiding specification. SSC employs a multi-step inference process where the model first generates a response based on a potentially tainted specification, critiques its output, and then revises the specification itself to remove the exploitable loophole. A final, more robust response is then generated using this self-corrected specification. Across experiments spanning creative writing and agentic coding tasks with several LMs, we demonstrate that while models initially game tainted specifications in 50-70\% of cases, the SSC process reduces this vulnerability by over 90\%. This dynamic repair occurs at inference time, requires no weight modification, and leads to more robustly aligned model behavior. Code at https://github.com/vicgalle/specification-self-correction .

Magnetic Resonance Imaging (MRI) is often acquired with anisotropic resolution to reduce scan time, producing stair-step artifacts along the through-plane direction. In through-plane MRI super-resolution, an efficiency-fidelity trade-off arises: feed-forward regressors are fast but oversmooth at large slice-thicknesses, while sampling-based methods improve fidelity at high inference cost. We propose DRIFT, a two-stage thickness-conditioned rectified flow framework for through-plane MRI super-resolution with continuous input slice-thickness. Stage 1 employs an Anatomical Projection Network (APN) to map low-resolution patches to a coarse high-resolution manifold, providing a deterministic anatomical initialization that shortens the residual transport of Stage 2 and stabilizes slice-wise refinement. Stage 2 refines details via rectified flow and introduces a Physics-Aware Difficulty (PAD) metric derived from slice-thickness induced through-plane bandwidth deficit to guide an Adaptive Integration Scheduler (AIS), allocating ODE steps by thickness. A Consistent Endpoint Trajectory Alignment (CETA) loss enforces thickness-consistent reconstructions. Experiments show that DRIFT outperforms super-resolution baselines while reducing inference cost. Code, models, and interactive demos are available at https://yoonseokchoi-ai.github.io/drift-eccv2026/.

A research proposal can describe an established mechanism correctly while claiming to introduce it. We study whether providing the earlier paper corrects such contribution claims. Three controlled experiments compare proposals generated with a contribution-bearing prior and a same-topic control. Providing the prior yields no clear aggregate reduction in unsupported novelty. Human analysis of 175 interpretable exposed proposals finds that 137 recognize the prior's relevance, but 61 correctly attribute the established contribution. Of 71 proposed remaining distinctions, 37 are covered by the same prior. We introduce Research Idea Novelty Inspection (RINI), which audits contribution claims against evidence, checks the remaining distinction, and applies local revisions. Five human annotators evaluate 1,080 original-revision pairs across three methods. On the same 240 originals judged to require correction, successful repair is 11.7% for Self-Revision, 39.1% for Retrieve-and-Revise, and 72.2% for RINI, with research tasks weighted equally. The improvement over same-evidence direct revision is 33.0 percentage points. The revised proposals retain their research questions and technical methods. These results motivate explicit contribution attribution when using literature to generate and revise research proposals.

Linear position interpolation helps pre-trained models using rotary position embeddings (RoPE) to extrapolate to longer sequence lengths. We propose using linear position interpolation to extend the extrapolation range of models using Attention with Linear Biases (ALiBi). We find position interpolation significantly improves extrapolation capability on upstream language modelling and downstream summarization and retrieval tasks.

Vision-language models have made significant strides recently, demonstrating superior performance across a range of tasks, e.g. optical character recognition and complex diagram analysis. Building on this trend, we introduce a new vision-language model, POINTS1.5, designed to excel in various real-world applications. POINTS1.5 is an enhancement of POINTS1.0 and incorporates several key innovations: i) We replace the original CLIP vision encoder, which had a fixed image resolution, with a NaViT-style vision encoder that supports native dynamic high resolution. This allows POINTS1.5 to process images of any resolution without needing to split them into tiles. ii) We add bilingual support to POINTS1.5, significantly enhancing its capability in Chinese. Due to the scarcity of open-source Chinese datasets for vision-language models, we collect numerous images from the Internet and annotate them using a combination of manual and automatic methods. iii) We propose a set of rigorous filtering methods for visual instruction tuning datasets. We comprehensively evaluate all these filtering methods, and choose the most effective ones to obtain the final visual instruction tuning set. Thanks to these innovations, POINTS1.5 significantly outperforms POINTS1.0 and demonstrates strong performance across a range of real-world applications. Notably, POINTS1.5-7B is trained on fewer than 4 billion tokens and ranks first on the OpenCompass leaderboard among models with fewer than 10 billion parameters

During the compression, transmission, and rendering of point clouds, various artifacts are introduced, affecting the quality perceived by the end user. However, evaluating the impact of these distortions on the overall quality is a challenging task. This study introduces PST-PCQA, a no-reference point cloud quality metric based on a low-complexity, learning-based framework. It evaluates point cloud quality by analyzing individual patches, integrating local and global features to predict the Mean Opinion Score. In summary, the process involves extracting features from patches, combining them, and using correlation weights to predict the overall quality. This approach allows us to assess point cloud quality without relying on a reference point cloud, making it particularly useful in scenarios where reference data is unavailable. Experimental tests on three state-of-the-art datasets show good prediction capabilities of PST-PCQA, through the analysis of different feature pooling strategies and its ability to generalize across different datasets. The ablation study confirms the benefits of evaluating quality on a patch-by-patch basis. Additionally, PST-PCQA's light-weight structure, with a small number of parameters to learn, makes it well-suited for real-time applications and devices with limited computational capacity. For reproducibility purposes, we made code, model, and pretrained weights available at https://github.com/michaelneri/PST-PCQA.

Geometry is invariant to viewpoint, which makes any collection of images a redundant encoding of a single 3D state. Existing feed-forward reconstruction models fail to exploit this: per-view methods emit overlapping, unaligned pointmaps that grow linearly with input count, while global-latent methods commit to a fixed, low-resolution output. We introduce Surflo, which compresses a variable number of unposed RGB views into K latent tokens-one global state-and decodes oriented 3D surface points by independently transporting them from noise onto the surface via flow matching. This frees the output from any fixed grid or token budget: the same latent yields from a few thousand to a million points in a single forward pass. To suppress the local inconsistencies inherent to independent per-point decoding, an inference-time guidance term correlates nearby points by injecting a photometric gradient during ODE integration. Surflo matches or surpasses feed-forward baselines on surface metrics, runs an order of magnitude faster than optimization-based methods that require hundreds of views, and is the only feed-forward approach to combine a global latent with arbitrary-resolution decoding.

The rapid proliferation of large language models (LLMs) and the growing diversity of their applications presents a unique optimization opportunity: selecting the right model for the task, while optimizing for speed, cost, and quality at a per-task level. However, inference endpoints can vary widely in quality, price, latency, context support, tool use, domain expertise, and reasoning behavior. This heterogeneity makes manual heuristics difficult to maintain and unlikely to achieve consistently favorable speed--cost--quality trade-offs on their own. We introduce , a lightweight GLiClass-based router that assigns a suitability score to each inference-time model label without autoregressive generation. The released 0.6B-parameter checkpoint combines a Qwen3 decoder with a shallow bidirectional scorer. Its decoder-KV execution path preserves a text-only key--value cache across a session, encodes only new dialogue turns, and evaluates transient candidate-label tokens without adding them to the persistent cache. The same checkpoint also predicts task type, difficulty, reasoning mode, and expected output length, and supports custom zero-shot labels. For task generation, we construct a task ontology with 23 families, 115 task types, 345 routable subtypes, 1,173 synthetic examples, and an orthogonal axis of 30 domains. Using this structure, we generate 150,000 verifier-scored tasks and 15,000 open-ended tasks. We then train the Qwen3 decoder on these tasks, while explicitly separating learned request prediction from per-task policies for attributes such as eligibility, cost, cache reuse, safety, and sovereignty. Across six LiveBench subsets, the router outperforms the mean candidate; on the selected 1,000-task subset, it achieves an aggregate top-1 score of 0.707 versus 0.696 for the strongest fixed model, with benchmark-dependent gains.

In standard transformer attention, a source token sends the same value vector to every receiver. The query determines how much to attend but not what to extract. This work introduces attention manifolds: learned 2D B-spline surfaces S_d(q_d, k_d) that modulate each value dimension based on the query-key interaction. Each surface is a tensor-product cubic B-spline initialized to zero, preserving pretrained behavior. Applied to LLaMA 3.2-1B-Instruct and 3B-Instruct, attention manifolds reduce WikiText-2 validation perplexity by 2--2.5 points with 0.3\% parameter overhead. Across 112 diverse prompts, surfaces change greedy-decoded output for 69\% (1B) to 83\% (3B) of cases, with the strongest effects on ambiguous and polysemous inputs (94--100\% change rate). The surfaces improve output quality: correcting factual errors (``the CAP theorem has three main components'' to ``it is impossible to guarantee all three''), increasing precision (``impossible to know certain properties'' to ``impossible to know both position and momentum''), and adding specificity (a generic quote to an attributed Saint Augustine citation, consistently at both scales). The learned surfaces are also mechanically editable: inverting a layer's coefficients changes greedy output for 9/10 prompts (KL~0.010), providing a geometric mechanism for model steering. Setting surface coefficients to -1 creates ``attention walls'' that block value flow through specific dimensions. In a preliminary experiment, a layer-wide wall redirects an explosive-device prompt from specific instructions to general educational content, suggesting a path toward safety-oriented manifold shaping.

Deploying GRPO on Flow Matching models has proven effective for text-to-image generation. However, existing paradigms typically propagate an outcome-based reward to all preceding denoising steps without distinguishing the local effect of each step. Moreover, current group-wise ranking mainly compares trajectories at matched timesteps and ignores within-trajectory dependencies, where certain early denoising actions can affect later states via delayed, implicit interactions. We propose TurningPoint-GRPO (TP-GRPO), a GRPO framework that alleviates step-wise reward sparsity and explicitly models long-term effects within the denoising trajectory. TP-GRPO makes two key innovations: (i) it replaces outcome-based rewards with step-level incremental rewards, providing a dense, step-aware learning signal that better isolates each denoising action's "pure" effect, and (ii) it identifies turning points-steps that flip the local reward trend and make subsequent reward evolution consistent with the overall trajectory trend-and assigns these actions an aggregated long-term reward to capture their delayed impact. Turning points are detected solely via sign changes in incremental rewards, making TP-GRPO efficient and hyperparameter-free. Extensive experiments also demonstrate that TP-GRPO exploits reward signals more effectively and consistently improves generation. Demo code is available at https://github.com/YunzeTong/TurningPoint-GRPO.

Recent inversion-free, flow-based image editing methods such as FlowEdit leverages a pre-trained noise-to-image flow model such as Stable Diffusion 3, enabling text-driven manipulation by solving an ordinary differential equation (ODE). While the lack of exact latent inversion is a core advantage of these methods, it often results in unstable editing trajectories and poor source consistency. To address this limitation, we propose {\em FlowAlign}, a novel inversion-free flow-based framework for consistent image editing with optimal control-based trajectory control. Specifically, FlowAlign introduces source similarity at the terminal point as a regularization term to promote smoother and more consistent trajectories during the editing process. Notably, our terminal point regularization is shown to explicitly balance semantic alignment with the edit prompt and structural consistency with the source image along the trajectory. Furthermore, FlowAlign naturally supports reverse editing by simply reversing the ODE trajectory, highliting the reversible and consistent nature of the transformation. Extensive experiments demonstrate that FlowAlign outperforms existing methods in both source preservation and editing controllability.

We propose a training recipe that treats charged-particle trajectory parameter regression on high-energy physics detector data as a sequence-modeling task. Kalman filters and linearized least-squares fits have been the classical standard approach for this task: they are optimal estimators for sparsely sampled linear-Gaussian data and are commonly used for trajectory parameter regression (fitting). The classical fitting techniques implemented for this domain reach a final precision of one part in 10^5 through detailed modeling of detector geometry, material, detection effects and precise numerical integration of the equations of motion through the detector's inhomogeneous magnetic field. With this study, we demonstrate that using a bidirectional gated linear recurrent encoder, one is able to reproduce the full precision of classical track fitting techniques. Using a custom kernel, we also achieve significantly higher throughput during GPU inference, compared to classical fitting software running on similarly priced multi-core CPU servers representing typically employed hardware. Such a speedup would lead to considerable cost savings for the pattern recognition at the Large Hadron Collider. To our knowledge, this is the first end-to-end learned track fit to reach the full precision and, at the same time, offer the opportunity to reduce the computing costs.

Route recommendation systems commonly adopt a multi-stage pipeline involving fine-ranking and re-ranking to produce high-quality ordered recommendations. However, this paradigm faces three critical limitations. First, there is a misalignment between offline training objectives and online metrics. Offline gains do not necessarily translate to online improvements. Actual performance must be validated through A/B testing, which may potentially compromise the user experience. Second, redundancy elimination relies on rigid, handcrafted rules that lack adaptability to the high variance in user intent and the unstructured complexity of real-world scenarios. Third, the strict separation between fine-ranking and re-ranking stages leads to sub-optimal performance. Since each module is optimized in isolation, the fine-ranking stage remains oblivious to the list-level objectives (e.g., diversity) targeted by the re-ranker, thereby preventing the system from achieving a jointly optimized global optimum. To overcome these intertwined challenges, we propose SCASRec (Self-Correcting and Auto-Stopping Recommendation), a unified generative framework that integrates ranking and redundancy elimination into a single end-to-end process. SCASRec introduces a stepwise corrective reward (SCR) to guide list-wise refinement by focusing on hard samples, and employs a learnable End-of-Recommendation (EOR) token to terminate generation adaptively when no further improvement is expected. Experiments on two large-scale, open-sourced route recommendation datasets demonstrate that SCASRec establishes an SOTA in offline and online settings. SCASRec has been fully deployed in a real-world navigation app, demonstrating its effectiveness.

Benchmark contamination is diagnosed with n-gram overlap, likelihood-based membership inference, or canary strings, and each needs something usually unavailable: the training corpus, a well-chosen test statistic, or foresight at release. A recent alternative reads it off a linear probe on internal activations. We show the natural way to do this does not work, specify one that survives measurement, then find that the correction making it work carries more variance than the null it is tested against. The protocol reports a zero-sum contrast on the depth profile of probe accuracy, recentred on a level-matched placebo baseline, tested against a label-permutation null, with the reference set twice the size of the suspect set. Each choice replaces a simpler alternative we rejected on measurement. Reporting the level of excess separability rather than its shape makes the false positive rate track the size of the analyst's own control set, 0.03 to 0.99 under a true null. Contrasting against a flat depth profile rejects a true null 0.72 of the time when surface decodability rises with depth, and loses all power when it falls. On real transformers the protocol fails a test the simulations did not pose. The recentring subtracts an estimate, and the permutation null holds it fixed. Re-estimated across split seeds on four audits of contaminated checkpoints, its standard deviation is 1.30 to 1.56 times the null's own in every arm: what is subtracted to remove a bias is more variable than what it corrects. The one nominally significant result, p = 0.0075, becomes 0.0745 once that variance is propagated, and no verdict is issued. The simulations missed this because their surface key is the covariate driving item variation; on real text it is a proxy, and degrading key quality in simulation reproduces it. We add a companion measurement and a widened null. No arm shows contamination.

Yes. Can it cure doom loops? Probably not. The Gemma 4 instruction-tuned models share a reproducible failure: on long factual enumeration prompts, such as listing every episode of a TV series, the 88 IAU constellations, or the 151 original Pokemon, they collapse into repetition, either a tight verbatim loop or a list whose entries decay onto a single answer. These loops occur at rates as high as 95% and survive prompt rewording, inference-engine changes, and most sampling adjustments. In this paper we explore whether this behavior is localized enough to remove by weight edits. To localize the cause, we use per-layer ablation and per-neuron attribution, then confirm the strongest candidates with full-generation sweeps. The loops trace to a small set of MLP neurons (or, in the 26B-A4B Mixture-of-Experts model, a few routed experts) which we suppress with static weight edits. These "surgeries" can be as small as a single sign-inverted neuron (in the E2B model). The size of the effective edits grows with model scale, but in all cases, the loop patterns can be addressed at normal generation budgets while preserving general-purpose benchmark scores. However, the edits do not solve everything: we also study longer thinking budgets, where the two larger models most visibly enter doom looping, i.e. a non-convergent regime in which the model self-corrects in circles over a fact it cannot recall, exhausting the budget without committing to a final answer. We show this residual failure is reduced but not eliminated by the same edits, and argue it is fundamentally a knowledge-precision problem rather than a removable circuit; weight surgery can delete a loop, but it cannot supply a missing fact. Our results are both a feasibility demonstration, that is, evidence that a concrete generation pathology can be localized to a few parameters and edited out, and a delineation of where that approach stops.

This paper reports on the second "Throughput" phase of the Tracking Machine Learning (TrackML) challenge on the Codalab platform. As in the first "Accuracy" phase, the participants had to solve a difficult experimental problem linked to tracking accurately the trajectory of particles as e.g. created at the Large Hadron Collider (LHC): given O(10^5) points, the participants had to connect them into O(10^4) individual groups that represent the particle trajectories which are approximated helical. While in the first phase only the accuracy mattered, the goal of this second phase was a compromise between the accuracy and the speed of inference. Both were measured on the Codalab platform where the participants had to upload their software. The best three participants had solutions with good accuracy and speed an order of magnitude faster than the state of the art when the challenge was designed. Although the core algorithms were less diverse than in the first phase, a diversity of techniques have been used and are described in this paper. The performance of the algorithms are analysed in depth and lessons derived.

Single-cell CRISPR screens summarize each perturbation by how far cells move from their unperturbed state, averaging over cell-to-cell variation. Whether the cells moved together is not captured: two perturbations with identical effect magnitude can differ qualitatively, one driving cells along a shared trajectory, the other scattering them around the same mean. We define SheshaP coherence (S_p), the mean cosine similarity between individual cell displacement vectors and their mean, and ask what it adds across six Perturb-seq datasets (2,285 perturbations; CRISPRa, CRISPRi, Cas9 knockout). Coherence and effect magnitude are closely coupled (Spearman ρ=0.84--0.98), and the coupling persists in a foundation-model embedding, under alternative effect-size definitions, and when analysis is restricted to responding cells. Associations reported without conditioning on effect size largely recover it, shown here for two comparisons that vanish under conditioning. Effect size accounts for 89--96\% of coherence variance; within the remainder, coherence is negatively associated with apoptosis and p53 signalling in the two largest screens. Two standard responder classifiers agree on only 68\% of cells. Directional coherence is largely a restatement of effect magnitude, and heterogeneity measures should report their redundancy with effect size as a matter of course. S_p is implemented in the open-source shesha-geometry Python package.

Modern stereo matching models fail when disparity crosses zero, with end-point error (EPE) rising by 4.6-37times. Yet stereoscopic content, from cinema 3D to VR, routinely contains objects behind the zero-disparity plane (ZDP), corresponding to negative disparities. The blind spot cascades through datasets, architectures, and evaluation protocols, all of which inherit the non-negative geometry. Rectified parallel cameras place ZDP at infinity, so every finite depth yields d=fB/z ge 0 by construction, and nothing within the standard pipeline can violate, or even measure, a negative disparity. To measure it, we propose ZDPShift, a benchmark of 21{,}495 stereo pairs from seven cinematographer-authored open movies, each frame rendered at five zero-disparity-plane positions with dense signed ground truth. Six state-of-the-art image and video stereo matching models collapse once the plane moves. On identical scene content, FoundationStereo goes from 2.24 px EPE to 75.33px, with every backbone leaving roughly half of all pixels exceeding a three-pixel disparity error. What is missing, however, is not the underlying matching capability. % The capability itself, however, is already present. Training on supervision synthesized from SceneFlow, which adds no new data or parameters, keeps the error flat across the signed range. Training only the decoder, with the pretrained matching features frozen, performs comparably across all six backbones, with EPE jittering within 0.2px. Thus, the pretrained features already extend to the negative regime they were never trained on, and only the output convention discarded it. Meanwhile, positive-regime accuracy on KITTI, Middlebury, ETH3D, and Sintel is largely preserved.

We propose a modified moment matching algorithm to avoid catastrophic failures for sources with a low signal to noise ratio (SNR). The proposed modifications include a method to eliminate non-physical negative pixel values and a forced single iteration with an initial guess derived from co-add measurements when iterative methods are unstable. We correct for all biases in measurements introduced by the method. We find that the proposed modifications allow the algorithm to avoid catastrophic failures in nearly 100\% of the cases, especially at low signal to noise ratio. Additionally, with a reasonable guess from co-add measurements, the algorithm measures the flux, centroid, size, shape and ellipticity with bias statistically consistent with zero. We show the proposed method allows us to measure sources seven times fainter than traditional methods when applied to images obtained from WIYN-ODI. We also present a scheme to find uncertainties in measurements when using the new method to measure astronomical sources.

Endometriosis ultrasound reports are often unstructured free-text documents that require manual abstraction for downstream tasks such as analytics, machine learning model training, and clinical auditing. We present EndoExtract, an on-premise LLM-powered system that extracts structured data from these reports and surfaces interpretive fields for human review. Through contextual inquiry with research assistants, we identified key workflow pain points: asymmetric trust between numerical and interpretive fields, repetitive manual highlighting, fatigue from sustained comparison, and terminology inconsistency across radiologists. These findings informed an interface that surfaces only interpretive fields for mandatory review, automatically highlights source evidence within PDFs, and separates batch extraction from human-paced verification. A formative workshop revealed that EndoExtract supports a shift from field-by-field data entry to supervisory validation, though participants noted risks of over-skimming and challenges in managing missing data.

Reconstruction of the soft tissues in robotic surgery from endoscopic stereo videos is important for many applications such as intra-operative navigation and image-guided robotic surgery automation. Previous works on this task mainly rely on SLAM-based approaches, which struggle to handle complex surgical scenes. Inspired by recent progress in neural rendering, we present a novel framework for deformable tissue reconstruction from binocular captures in robotic surgery under the single-viewpoint setting. Our framework adopts dynamic neural radiance fields to represent deformable surgical scenes in MLPs and optimize shapes and deformations in a learning-based manner. In addition to non-rigid deformations, tool occlusion and poor 3D clues from a single viewpoint are also particular challenges in soft tissue reconstruction. To overcome these difficulties, we present a series of strategies of tool mask-guided ray casting, stereo depth-cueing ray marching and stereo depth-supervised optimization. With experiments on DaVinci robotic surgery videos, our method significantly outperforms the current state-of-the-art reconstruction method for handling various complex non-rigid deformations. To our best knowledge, this is the first work leveraging neural rendering for surgical scene 3D reconstruction with remarkable potential demonstrated. Code is available at: https://github.com/med-air/EndoNeRF.

Large Language Models (LLMs) can correct their self-generated responses, but a decline in accuracy after self-correction is also witnessed. To have a deeper understanding of self-correction, we endeavor to decompose, evaluate, and analyze the self-correction behaviors of LLMs. By enumerating and analyzing answer correctness before and after self-correction, we decompose the self-correction capability into confidence (being confident to correct answers) and critique (turning wrong answers to correct) capabilities, and propose two metrics from a probabilistic perspective to measure these 2 capabilities, along with another metric for overall self-correction capability evaluation. Based on our decomposition and evaluation metrics, we conduct extensive experiments and draw some empirical conclusions. For example, we find different models can exhibit distinct behaviors: some models are confident while others are more critical. We also find the trade-off between the two capabilities (i.e. improving one can lead to a decline in the other) when manipulating model self-correction behavior by prompts or in-context learning. Further, we find a simple yet efficient strategy to improve self-correction capability by transforming Supervision Fine-Tuning (SFT) data format, and our strategy outperforms vanilla SFT in both capabilities and achieves much higher accuracy after self-correction. Our code will be publicly available on GitHub.

Single-cell perturbation atlases rarely measure every intervention in every cellular context: a query perturbation is often observed in one or more source contexts but missing in the recipient context where its effect is needed. Ignoring those measured responses discards query-specific experimental evidence, whereas copying or weakly calibrating them across contexts risks transferring the wrong signal. We propose PerturbMap, which predicts a missing recipient-context effect by combining a recipient-local low-rank base with accepted proposals that transport the same perturbation's measured source responses through source-to-recipient ridge experts fit on paired training perturbations, with proposal weights determined by route reliability estimated on validation anchors. On the Perturb-CITE-seq melanoma cohort, PerturbMap improves full-effect MSE by 4.1\% over a recipient-local low-rank base and achieves lower MSE than FedAvg, zero-response, raw-copy, calibrated-copy, and identity-shuffled affine controls. It remains within 2.82times10^{-6} MSE of our centralized token-matched pooled reference, which uses a stronger training interface. A condition-mean specificity diagnostic shows the same direction: same-recipient top-10 counterpart retrieval by cosine increases from 74.5\% for the low-rank base to 80.5\% for PerturbMap.

Large language models (LLMs) often exhibit hallucinations due to incorrect or outdated knowledge. Hence, model editing methods have emerged to enable targeted knowledge updates. To achieve this, a prevailing paradigm is the locating-then-editing approach, which first locates influential parameters and then edits them by introducing a perturbation. While effective, current studies have demonstrated that this perturbation inevitably disrupt the originally preserved knowledge within LLMs, especially in sequential editing scenarios. To address this, we introduce AlphaEdit, a novel solution that projects perturbation onto the null space of the preserved knowledge before applying it to the parameters. We theoretically prove that this projection ensures the output of post-edited LLMs remains unchanged when queried about the preserved knowledge, thereby mitigating the issue of disruption. Extensive experiments on various LLMs, including LLaMA3, GPT2-XL, and GPT-J, show that AlphaEdit boosts the performance of most locating-then-editing methods by an average of 36.4% with a single line of additional code for projection solely. Our code is available at: https://github.com/jianghoucheng/AlphaEdit.

Rotary Position Embedding (RoPE) is an efficient position encoding approach and is widely utilized in numerous large language models (LLMs). Recently, a lot of methods have been put forward to further expand the context window based on RoPE. The core concept of those methods is to predefine or search for a set of factors to rescale the base frequencies of RoPE. Nevertheless, it is quite a challenge for existing methods to predefine an optimal factor due to the exponential search space. In view of this, we introduce PSC (Phase Shift Calibration), a small module for calibrating the frequencies predefined by existing methods. With the employment of PSC, we demonstrate that many existing methods can be further enhanced, like PI, YaRN, and LongRoPE. We conducted extensive experiments across multiple models and tasks. The results demonstrate that (1) when PSC is enabled, the comparative reductions in perplexity increase as the context window size is varied from 16k, to 32k, and up to 64k. (2) Our approach is broadly applicable and exhibits robustness across a variety of models and tasks. The code can be found at https://github.com/WNQzhu/PSC.

Streaming geometric foundation models are emerging as a compelling alternative to SLAM systems. Yet this streaming nature introduces a fundamental issue: each prediction is made from limited context, which is vulnerable to dynamic objects and weak textures. Small local errors accumulate into severe geometric distortion and long-horizon scale drift. We argue that reliable streaming reconstruction requires geometric foundation models to be not only predictive, but also self-correcting. We introduce SURE-Map, a self-correcting framework built upon two complementary principles. First, we explicitly model cross-view geometric uncertainty. Unlike conventional depth or point confidence, which primarily reflects the reliability of individual-view prediction, our uncertainty directly measures whether the jointly predicted pose and depth induce geometrically consistent cross-view pixel correspondences. Second, because local correction alone cannot eliminate slowly accumulating scale errors, we introduce multi-timescale self-correction: fast consecutive-frame inference preserves streaming efficiency, while sparse keyframe-window inference provides longer-range geometric evidence to periodically recalibrate the scale of recent trajectories. SURE-Map establishes new state-of-the-art performance for online feed-forward reconstruction across long-horizon benchmarks, reducing ATE-RMSE from 24.00 to 17.24 m on KITTI, 5.11 to 4.74 m on Oxford Spires, and 31.37 to 28.58 m on VBR, with further improvements to 15.17, 4.63, and 22.12 m when incorporating loop-closure refinement. Project page: https://mingkai-liu.github.io/projects/sure-map/.

Point-based representations have recently gained popularity in novel view synthesis, for their unique advantages, e.g., intuitive geometric representation, simple manipulation, and faster convergence. However, based on our observation, these point-based neural re-rendering methods are only expected to perform well under ideal conditions and suffer from noisy, patchy points and unbounded scenes, which are challenging to handle but defacto common in real applications. To this end, we revisit one such influential method, known as Neural Point-based Graphics (NPBG), as our baseline, and propose Robust Point-based Graphics (RPBG). We in-depth analyze the factors that prevent NPBG from achieving satisfactory renderings on generic datasets, and accordingly reform the pipeline to make it more robust to varying datasets in-the-wild. Inspired by the practices in image restoration, we greatly enhance the neural renderer to enable the attention-based correction of point visibility and the inpainting of incomplete rasterization, with only acceptable overheads. We also seek for a simple and lightweight alternative for environment modeling and an iterative method to alleviate the problem of poor geometry. By thorough evaluation on a wide range of datasets with different shooting conditions and camera trajectories, RPBG stably outperforms the baseline by a large margin, and exhibits its great robustness over state-of-the-art NeRF-based variants. Code available at https://github.com/QT-Zhu/RPBG.

Standard autoregressive language models generate text sequentially, but revision requires referring back to tokens in the input context or those already generated. Causal Edit Serialization (CES) is introduced as a framework for expressing such revisions within the same causal token stream. Special pointer tokens are paired with predicted source addresses, allowing insertion, deletion, replacement, copying and movement to be localized explicitly. A lightweight localization head and dual-index rotary position encoding support both address prediction and conditioning on previously emitted pointers, while retaining a standard causal attention mask. A pretraining procedure combines ordinary language modeling with serialized repairs derived from random corruptions, model-generated edits and repeated text. Across model scales and editing baselines, CES models demonstrate complete applied edits with modestly higher clean-text bits per byte than clean autoregressive models. Supervised and reinforcement-learning post-training provide a grammatical-error-correction proof of concept, producing more beneficial than harmful changes under reference-blind model judging. Correct repair programs also improve subsequent text prediction while the original context and its cached states are retained. CES provides a common interface for generation and localized revision, with potential extensions to iterative refinement and additional pointer-addressed transformations.

When a language model asserts that "the capital of Australia is Sydney," does it know this is wrong? We characterize the geometry of correctness representations across 9 models from 5 architecture families. The structure is simple: the discriminative signal occupies 3-8 dimensions, performance degrades with additional dimensions, and no nonlinear classifier improves over linear separation. Centroid distance in the low-dimensional subspace matches trained probe performance (0.90 AUC), enabling few-shot detection: on GPT-2, 25 labeled examples achieve 89% of full-data accuracy. We validate causally through activation steering: the learned direction produces 10.9 percentage point changes in error rates while random directions show no effect. Internal probes achieve 0.80-0.97 AUC; output-based methods (P(True), semantic entropy) achieve only 0.44-0.64 AUC. The correctness signal exists internally but is not expressed in outputs. That centroid distance matches probe performance indicates class separation is a mean shift, making detection geometric rather than learned.

Large language models (LLMs) now write code in settings where misreading a single word can break safety or cost money, yet we still expect them to overlook stray typos. To probe where useful robustness ends and harmful insensitivity begins, we compile 50 LeetCode problems and craft three minimal prompt perturbations that should vary in importance: (i) progressive underspecification deleting 10 % of words per step; (ii) lexical flip swapping a pivotal quantifier ("max" to "min"); and (iii) jargon inflation replacing a common noun with an obscure technical synonym. Six frontier models, including three "reasoning-tuned" versions, solve each mutated prompt, and their Python outputs are checked against the original test suites to reveal whether they reused the baseline solution or adapted. Among 11 853 generations we observe a sharp double asymmetry. Models remain correct in 85 % of cases even after 90 % of the prompt is missing, showing over-robustness to underspecification, yet only 54 % react to a single quantifier flip that reverses the task, with reasoning-tuned variants even less sensitive than their bases. Jargon edits lie in between, passing through 56 %. Current LLMs thus blur the line between harmless noise and meaning - changing edits, often treating both as ignorable. Masking salient anchors such as function names can force re - evaluation. We advocate evaluation and training protocols that reward differential sensitivity: stay steady under benign noise but adapt - or refuse - when semantics truly change.

Equirectangular projection (ERP) is the standard representation for 360^circ imagery, and robust dense feature matching on ERP underpins panoramic stereo, view synthesis, and omnidirectional SLAM. Dense matchers trained on flat images degrade systematically on ERP because the chart introduces three coupled distortions -- topological, metric, and area -- that standard coarse matching and visibility estimation do not explicitly model. We show that correcting the three distortions at the coarse-stage interfaces where they arise -- pairwise distortions in attention, per-pixel distortion in covisibility gating -- improves PCK@1^circ from 0.229 to 0.275 on Matterport3D under a fixed coarse scaffold, with the refiner architecture unchanged -- our central result. Concretely, SCCM (Spherically Consistent Coarse Matching) augments a chart-naive cross-attention/dual-softmax coarse matcher with two sphere-derived priors: Spherical Positional Attention (SPA) pairs a yaw-periodic RoPE (topology) with a tangent-plane bias (metric), and Area-Aware Covisibility (AAC) applies a pre-sigmoid log-area correction (area). The chart-naive scaffold serves as a controlled reference, separating the scaffold-replacement effect from the spherical-prior effect. Instantiated in the RoMa V1 framework with the same frozen encoder, refiner architecture, and loss, SCCM also outperforms the ERP-native EDM (0.163) and an ERP-retrained RoMa V1 (0.198) under a unified ERP dense matching protocol, while perspective-trained matchers largely fail on ERP. It further transfers zero-shot to Stanford2D3D and, when trained on outdoor Holo360D, leads there as well.

This paper presents a NeRF-based framework for point cloud (PCD) reconstruction, specifically designed for indoor high-throughput plant phenotyping facilities. Traditional NeRF-based reconstruction methods require cameras to move around stationary objects, but this approach is impractical for high-throughput environments where objects are rapidly imaged while moving on conveyors or rotating pedestals. To address this limitation, we develop a variant of NeRF-based PCD reconstruction that uses a single stationary camera to capture images as the object rotates on a pedestal. Our workflow comprises COLMAP-based pose estimation, a straightforward pose transformation to simulate camera movement, and subsequent standard NeRF training. A defined Region of Interest (ROI) excludes irrelevant scene data, enabling the generation of high-resolution point clouds (10M points). Experimental results demonstrate excellent reconstruction fidelity, with precision-recall analyses yielding an F-score close to 100.00 across all evaluated plant objects. Although pose estimation remains computationally intensive with a stationary camera setup, overall training and reconstruction times are competitive, validating the method's feasibility for practical high-throughput indoor phenotyping applications. Our findings indicate that high-quality NeRF-based 3D reconstructions are achievable using a stationary camera, eliminating the need for complex camera motion or costly imaging equipment. This approach is especially beneficial when employing expensive and delicate instruments, such as hyperspectral cameras, for 3D plant phenotyping. Future work will focus on optimizing pose estimation techniques and further streamlining the methodology to facilitate seamless integration into automated, high-throughput 3D phenotyping pipelines.

Summarization models often generate text that is poorly calibrated to quality metrics because they are trained to maximize the likelihood of a single reference (MLE). To address this, recent work has added a calibration step, which exposes a model to its own ranked outputs to improve relevance or, in a separate line of work, contrasts positive and negative sets to improve faithfulness. While effective, much of this work has focused on how to generate and optimize these sets. Less is known about why one setup is more effective than another. In this work, we uncover the underlying characteristics of effective sets. For each training instance, we form a large, diverse pool of candidates and systematically vary the subsets used for calibration fine-tuning. Each selection strategy targets distinct aspects of the sets, such as lexical diversity or the size of the gap between positive and negatives. On three diverse scientific long-form summarization datasets (spanning biomedical, clinical, and chemical domains), we find, among others, that faithfulness calibration is optimal when the negative sets are extractive and more likely to be generated, whereas for relevance calibration, the metric margin between candidates should be maximized and surprise--the disagreement between model and metric defined candidate rankings--minimized. Code to create, select, and optimize calibration sets is available at https://github.com/griff4692/calibrating-summaries

Employing Large Language Models (LLMs) for semantic parsing has achieved remarkable success. However, we find existing methods fall short in terms of reliability and efficiency when hallucinations are encountered. In this paper, we address these challenges with a framework called QueryAgent, which solves a question step-by-step and performs step-wise self-correction. We introduce an environmental feedback-based self-correction method called ERASER. Unlike traditional approaches, ERASER leverages rich environmental feedback in the intermediate steps to perform selective and differentiated self-correction only when necessary. Experimental results demonstrate that QueryAgent notably outperforms all previous few-shot methods using only one example on GrailQA and GraphQ by 7.0 and 15.0 F1. Moreover, our approach exhibits superiority in terms of efficiency, including runtime, query overhead, and API invocation costs. By leveraging ERASER, we further improve another baseline (i.e., AgentBench) by approximately 10 points, revealing the strong transferability of our approach.

An isolated final user message is often treated as the query in evaluations of AI systems. In a conversation, however, the actionable request may be distributed across preceding turns. We directly test whether that omitted within-conversation context changes answers. For each of 180 English multi-turn conversations sampled from a governed commercial corpus and the public PRISM dataset, we hold the final user message and requested answer model constant while generating three answers: one from the full role-labelled conversation, one from the final message alone, and one from the final message plus a prefix-only reconstruction capped at 160 words. A separately requested judge model evaluates answers under randomized labels. The prespecified primary endpoint is a material difference that could change what the user does, rather than a difference in style or detail. After inverse-probability weighting to the eligible cohorts, the full-conversation and isolated-final answers differ materially in 44.7% of cases (95% bootstrap CI 33.8% to 56.1%). Full-conversation answers score 0.49 points higher on a 0 to 4 request-satisfaction scale (0.32 to 0.67). Adding the compressed prefix reduces the material-difference rate to 30.8% (20.2% to 42.1%), a 13.9-point reduction (4.9% to 24.1%), and reduces the mean satisfaction gap to 0.01 points (-0.12 to 0.13). Yet compression is not equivalent to the complete dialogue context: almost one third of answers remain materially different. An order-swapped repeat on 48 cases yields 91.7% agreement and kappa = 0.83 for the primary decision. The study concerns preceding turns in the same conversation and does not test persistent memory across separate conversations.

Identifying travelers' transportation modes is important in transportation science and location-based services. It's appealing for researchers to leverage GPS trajectory data to infer transportation modes with the popularity of GPS-enabled devices, e.g., smart phones. Existing studies frame this problem as classification task. The dominant two-stage studies divide the trip into single-one mode segments first and then categorize these segments. The over segmentation strategy and inevitable error propagation bring difficulties to classification stage and make optimizing the whole system hard. The recent one-stage works throw out trajectory segmentation entirely to avoid these by directly conducting point-wise classification for the trip, whereas leaving predictions dis-continuous. To solve above-mentioned problems, inspired by YOLO and SSD in object detection, we propose to reframe change point detection and segment classification as a unified regression task instead of the existing classification task. We directly regress coordinates of change points and classify associated segments. In this way, our method divides the trip into segments under a supervised manner and leverage more contextual information, obtaining predictions with high accuracy and continuity. Two frameworks, TrajYOLO and TrajSSD, are proposed to solve the regression task and various feature extraction backbones are exploited. Exhaustive experiments on GeoLife dataset show that the proposed method has competitive overall identification accuracy of 0.853 when distinguishing five modes: walk, bike, bus, car, train. As for change point detection, our method increases precision at the cost of drop in recall. All codes are available at https://github.com/RadetzkyLi/TrajYOLO-SSD.

PPO has been widely adopted for training large language models (LLMs) at the token level in multi-turn dialogue and reasoning tasks. However, its performance is often unstable and prone to collapse. Through empirical analysis, we identify two main sources of instability in this setting: (1)~token-level importance sampling, which is misaligned with the natural granularity of multi-turn environments that have distinct turn-level stages, and (2) inaccurate advantage estimates from off-policy samples, where the critic has not learned to evaluate certain state-action pairs, resulting in high-variance gradients and unstable updates. To address these challenges, we introduce two complementary stabilization techniques: (1) turn-level importance sampling, which aligns optimization with the natural structure of multi-turn reasoning, and (2) clipping-bias correction, which normalizes gradients by downweighting unreliable, highly off-policy samples. Depending on how these components are combined, we obtain three variants: Turn-PPO (turn-level sampling only), S-PPO (clipping-bias correction applied to token-level PPO), and ST-PPO (turn-level sampling combined with clipping-bias correction). In our experiments, we primarily study ST-PPO and S-PPO, which together demonstrate how the two stabilization mechanisms address complementary sources of instability. Experiments on multi-turn search tasks across general QA, multi-hop QA, and medical multiple-choice QA benchmarks show that ST-PPO and S-PPO consistently prevent the performance collapses observed in large-model training, maintain lower clipping ratios throughout optimization, and achieve higher task performance than standard token-level PPO. These results demonstrate that combining turn-level importance sampling with clipping-bias correction provides a practical and scalable solution for stabilizing multi-turn LLM agent training.

This paper presents a parameter-efficient prompt tuning method, named PPT, to adapt a large multi-modal model for 3D point cloud understanding. Existing strategies are quite expensive in computation and storage, and depend on time-consuming prompt engineering. We address the problems from three aspects. Firstly, a PromptLearner module is devised to replace hand-crafted prompts with learnable contexts to automate the prompt tuning process. Then, we lock the pre-trained backbone instead of adopting the full fine-tuning paradigm to substantially improve the parameter efficiency. Finally, a lightweight PointAdapter module is arranged near target tasks to enhance prompt tuning for 3D point cloud understanding. Comprehensive experiments are conducted to demonstrate the superior parameter and data efficiency of the proposed method.Meanwhile, we obtain new records on 4 public datasets and multiple 3D tasks, i.e., point cloud recognition, few-shot learning, and part segmentation. The implementation is available at https://github.com/auniquesun/PPT.

Seven years ago, researchers proposed a postprocessing method to equalize the error rates of a model across different demographic groups. The work launched hundreds of papers purporting to improve over the postprocessing baseline. We empirically evaluate these claims through thousands of model evaluations on several tabular datasets. We find that the fairness-accuracy Pareto frontier achieved by postprocessing contains all other methods we were feasibly able to evaluate. In doing so, we address two common methodological errors that have confounded previous observations. One relates to the comparison of methods with different unconstrained base models. The other concerns methods achieving different levels of constraint relaxation. At the heart of our study is a simple idea we call unprocessing that roughly corresponds to the inverse of postprocessing. Unprocessing allows for a direct comparison of methods using different underlying models and levels of relaxation.

Multi-step enterprise agent tasks fail in a characteristic way: single-pass inference has no checkpoint between deciding an answer and committing to it. We study one production system (Leni) whose architecture installs such checkpoints: verification loops (execute, observe, compare, correct) staffed by lightweight task-specialized post-trained models. We evaluate the unmodified production configuration on three public benchmarks stressing distinct failure modes: SpreadsheetBench Verified (silent computation error), BullshitBench v2 (premise confabulation), and the GAIA validation split (cascade error over long tool chains). The full system improves over its frontier base model by +11.0 percentage points on SpreadsheetBench (91.25% vs 80.25%, n=400, p<0.001), +7 to +10 percentage points on BullshitBench (98% vs 91%, n=100), and roughly +15 points on GAIA validation (75.2% pass@1, n=165; 83.0% best-of-k). Our central contribution is a decomposition of that uplift: most of it comes from scaffolding, routing, and specialist models rather than from the verification step itself, whose isolated contribution is small (+1.5 points) but concentrated at the top of the score distribution, where it converts otherwise-failing tasks. We instrument the loop end-to-end, yielding an empirical verifier confusion matrix (catch rate about 0.20, fix rate 0.75, no false-alarm regressions) that grounds a compounding-reliability model. Specialist-swap ablations suggest that the loop's value depends on who observes it: replacing the small trained verifier with the generating frontier model eliminates most rescues. A valid-premise control shows zero over-rejections in 100 expert-level questions.

Closed-source frontier labs do not disclose parameter counts. Storing F facts requires at least F/(bits per parameter) weights, so factual recall lower-bounds parameter count--an intrinsic, serving-independent signal, though (as we show) a coarse one. We introduce Incompressible Knowledge Probes (IKPs), a benchmark of 1,400 factual questions spanning 7 tiers of obscurity, designed to isolate knowledge that cannot be derived by reasoning or compressed by architectural improvements. We score with no hallucination penalty (lambda = 0: IKP accuracy is simply the fraction of probed facts answered correctly), which removes both the penalty hyperparameter and the per-tier flooring choice; a full lambda x flooring ablation shows the calibration is robust across scoring choices while individual estimates are not, motivating the no-penalty default. We calibrate a log-linear mapping from IKP accuracy to parameter count on 93 open-weight models (135M-1,600B) spanning 19 vendors, achieving R^2 = 0.910; leave-one-out cross-validation confirms generalization (median fold error 1.48x, 72% within 2x, 86% within 3x). The instrument is deliberately coarse--its 90% prediction interval spans ~3x in either direction, wider than inference economics--so IKP recovers order-of-magnitude effective capacity and relative rankings, not precise parameter counts. For Mixture-of-Experts models, total parameters predict knowledge (R^2 = 0.67) better than active parameters (R^2 = 0.41). We evaluate 201 models from 27 vendors on a curated probe set (1,311 of 1,400 probes surviving name-collision and label-ambiguity filters) and report effective knowledge capacity for all major proprietary frontier models as prediction bands rather than point estimates; for heavily safety-tuned models these are lower bounds, since refusal policy can suppress tens of percentage points of otherwise-answerable capacity.

Temporal sentence grounding aims to localize moments relevant to a language description. Recently, DETR-like approaches achieved notable progress by predicting the center and length of a target moment. However, they suffer from the issue of center misalignment raised by the inherent ambiguity of moment centers, leading to inaccurate predictions. To remedy this problem, we propose a novel boundary-oriented moment formulation. In our paradigm, the model no longer needs to find the precise center but instead suffices to predict any anchor point within the interval, from which the boundaries are directly estimated. Based on this idea, we design a boundary-aligned moment detection transformer, equipped with a dual-pathway decoding process. Specifically, it refines the anchor and boundaries within parallel pathways using global and boundary-focused attention, respectively. This separate design allows the model to focus on desirable regions, enabling precise refinement of moment predictions. Further, we propose a quality-based ranking method, ensuring that proposals with high localization qualities are prioritized over incomplete ones. Experiments on three benchmarks validate the effectiveness of the proposed methods. The code is available at https://github.com/Pilhyeon/BAM-DETR.

Multi-view 3D reconstruction methods remain highly sensitive to photometric inconsistencies arising from camera optical characteristics and variations in image signal processing (ISP). Existing mitigation strategies such as per-frame latent variables or affine color corrections lack physical grounding and generalize poorly to novel views. We propose the Physically-Plausible ISP (PPISP) correction module, which disentangles camera-intrinsic and capture-dependent effects through physically based and interpretable transformations. A dedicated PPISP controller, trained on the input views, predicts ISP parameters for novel viewpoints, analogous to auto exposure and auto white balance in real cameras. This design enables realistic and fair evaluation on novel views without access to ground-truth images. PPISP achieves state-of-the-art performance on standard benchmarks, while providing intuitive control and supporting the integration of metadata when available. The source code is available at: https://github.com/nv-tlabs/ppisp

Many post-training quantization (PTQ) methods use layer-wise reconstruction, second-order proxy objectives, or activation-aware transformations to reduce quantization-induced error. Whether that error signal predicts the downstream functional impact of quantizing an individual attention projection has not been directly characterized. We sweep nine open-weight language models (1.3B--8B parameters; OPT, GPT-J, LLaMA-1/2/3, Mistral, Qwen 2.5) and quantize one attention projection at a time under round-to-nearest (RTN) and, for seven models, GPTQ at 3 and 4 bits, recording reconstruction error, perplexity change, and per-projection activation-weighted quantization error for 3,808 distinct measurements. We find: (1) within a given component type (Q, K, V, or O), reconstruction error explains less than 10% of the variance in perplexity sensitivity in 27 of 36 cases under RTN, with median R^2 = 0.044; (2) both component type and layer identity explain more variance than reconstruction error in all 9 models, with layer identity the strongest predictor in 7 of 9 models and component type strongest in the remaining 2; (3) value (V) projections are the most commonly dominant component, accounting for 38--51% of total positive Delta PPL in seven of nine models; (4) the dominant component is broadly preserved between RTN and GPTQ (5 of 7 cases); and (5) activation-weighted quantization error is a moderately better within-component predictor than reconstruction error for V projections specifically (median R^2 of 0.20 vs. 0.06). These findings indicate that relative weight reconstruction error alone is insufficient for sensitivity-aware bit allocation, and that V projections merit dedicated consideration in mixed-precision schemes.

Machine learning models trained on Earth observation data, such as satellite imagery, have demonstrated significant promise in predicting household-level wealth indices, enabling the creation of high-resolution wealth maps that can be leveraged across multiple causal trials. However, because standard training objectives prioritize overall predictive accuracy, these predictions inherently suffer from shrinkage toward the mean, leading to attenuated estimates of causal treatment effects and limiting their utility in policy. Existing debiasing methods, such as Prediction-Powered Inference, can handle this attenuation bias but require additional fresh ground-truth data at the downstream stage of causal inference, which restricts their applicability in data-scarce environments. Here, we introduce and evaluate two correction methods -- linear calibration correction and Tweedie's correction -- that substantially reduce prediction bias without relying on newly collected labeled data. Linear calibration corrects bias through a straightforward linear transformation derived from held-out calibration data, whereas Tweedie's correction leverages empirical Bayes principles to directly address shrinkage-induced biases by exploiting score functions derived from the model's learning patterns. Through analytical exercises and experiments using Demographic and Health Survey data, we demonstrate that the proposed methods meet or outperform existing approaches that either require (a) adjustments to training pipelines or (b) additional labeled data. These approaches may represent a promising avenue for improving the reliability of causal inference when direct outcome measures are limited or unavailable, enabling a "one map, many trials" paradigm where a single upstream data creation team produces predictions usable by many downstream teams across diverse ML pipelines.

Revision is a crucial step in scientific writing, where authors refine their work to improve clarity, structure, and academic quality. Existing approaches to automated writing assistance often focus on sentence-level revisions, which fail to capture the broader context needed for effective modification. In this paper, we explore the impact of shifting from sentence-level to paragraph-level scope for the task of scientific text revision. The paragraph level definition of the task allows for more meaningful changes, and is guided by detailed revision instructions rather than general ones. To support this task, we introduce ParaRev, the first dataset of revised scientific paragraphs with an evaluation subset manually annotated with revision instructions. Our experiments demonstrate that using detailed instructions significantly improves the quality of automated revisions compared to general approaches, no matter the model or the metric considered.

Text-guided molecular generation with LLMs often yields invalid SMILES. We argue that invalid drafts should be addressed through a shift from validity-oriented repair to identity-preserving molecular recovery: the objective is not only to restore chemical validity, but also to preserve target-relevant structural cues and recover the molecular identity implied by the description. This perspective reveals the limitations of existing correction strategies. Post-hoc repair can recover validity while distorting key structures, LLM-only correction can introduce unintended global drift, and generic agentic correction remains constrained by greedy single-candidate trajectories even when equipped with executable RDKit edit tools. To address these limitations, we propose AMREC, which couples molecule-aware mismatch tracking with expanded candidate exploration and trajectory-level selection. On invalid ChEBI-20 drafts from three backbone models, AMREC achieves the strongest overall recovery profile across structural, exact-match, and string-level metrics.

Counterfactual prompting (i.e., perturbing a single factor and measuring output change) is widely used to evaluate things like LLM bias and CoT faithfulness. But in this work we argue that observed effects cannot be attributed to the targeted factor without accounting for baseline ``meaning-preserving'' modifications to text that establish general model sensitivity. This is because every counterfactual edit is a compound treatment that bundles the variable of interest with incidental surface-form variation; this violates treatment variation irrelevance. We observe prediction flip rates on MedQA of 14.9% when we surgically change patient gender. However, this is statistically indistinguishable from the flip rates induced by simply paraphrasing inputs (14.1%). In this case, it would therefore be unwarranted to conclude that the LLM is especially sensitive to patient gender. To account for this and robustly measure the effects of targeted interventions, we propose a framework in which we compare (via statistical testing) differences observed under target interventions to those induced by paraphrasing inputs. We then use this framework to revisit a analysis done on the MedPerturb dataset, which reported evidence of model sensitivity to patient demographics and stylistic cues. We find that these effects largely dissipate when we account for general model sensitivity, with only 5 of 120 tests reaching statistical significance. Applying the same framework to occupational biography classification, we detect clearly significant directional gender bias, showing that the framework identifies real directional effects even when they are small. We evaluate a range of metrics -- aggregate, per-sample distributional, and regression -- and find that per-sample metrics are dramatically more powerful than aggregate metrics and regression powerfully and uniquely characterizes effect direction and magnitude.

LeWorldModel trains a latent world model with a prediction loss and a single anti-collapse regulariser, and reports approximately 87% of goals reached on TwoRoom, its simplest diagnostic environment. We reproduce that result by independent reimplementation on roughly $25 of rented compute, with all evaluation on one laptop CPU. We reach 94.0% at the repository's evaluation goal offset, against 84.0% for the authors' own released checkpoint measured under our protocol on identical episodes, and we reproduce the reported representation result directly (position probe Pearson r = 0.9988 against a reported 0.996). Reaching that point required four conventions that determine the outcome and appear in no released configuration file: dense action gathering across a frameskip block, a programmatically-set action-encoder width, ImageNet pixel normalisation, and action z-scoring. A reproducer following the released configurations alone obtains a model whose predictor cannot converge. The evaluation protocol is itself contested by the released material. The paper's appendix and the repository's configuration specify different goal offsets and step budgets; on the authors' own weights these yield 14.0% and 84.0%, and only the configuration's values reproduce the reported figure. On fifty identical episodes, changing nothing but how the goal is constructed moves that checkpoint from 84.0% to 8.0%. Two findings generalise. One-step prediction accuracy does not predict long-horizon planning success: across three checkpoints spanning a sevenfold range in prediction error, including the authors' own, it orders short-horizon success monotonically and fails to order long-horizon success at all. And a batch normalisation layer inflated our reported validation loss by up to a factor of 300, concealing a training loss that was flat throughout.

Quantization correction methods usually optimize weights, quantization parameters, or reconstruction objectives, while the underlying parameter subspaces responsible for effective correction remain unclear. In this work, we study quantization correction from a parameter subspace perspective and reveal that correction capability is highly non-uniform across parameter groups. By decomposing trainable parameters into backbone weights, normalization-affine parameters, and quantization parameters, we show that the low-dimensional normalization-affine subspace provides a highly efficient correction direction under matched budgets. Based on this finding, we propose SandwichQuant, a two-stage normalization-affine correction framework that performs adaptation before and after quantization. The pre-stage improves quantization robustness, while the post-stage compensates residual errors after the quantized graph is fixed. Extensive experiments on vision models and large language models demonstrate consistent improvements under various low-bit quantization settings, validating the effectiveness of subspace-aligned correction.

Given a K-vertex simplex in a d-dimensional space, suppose we measure n points on the simplex with noise (hence, some of the observed points fall outside the simplex). Vertex hunting is the problem of estimating the K vertices of the simplex. A popular vertex hunting algorithm is successive projection algorithm (SPA). However, SPA is observed to perform unsatisfactorily under strong noise or outliers. We propose pseudo-point SPA (pp-SPA). It uses a projection step and a denoise step to generate pseudo-points and feed them into SPA for vertex hunting. We derive error bounds for pp-SPA, leveraging on extreme value theory of (possibly) high-dimensional random vectors. The results suggest that pp-SPA has faster rates and better numerical performances than SPA. Our analysis includes an improved non-asymptotic bound for the original SPA, which is of independent interest.

Spatial return models take the interaction matrix as given and leave feedback uninterpreted. We construct a bandwidth-free field from firms' language-model article embedding distributions using target-anchored Wasserstein barycentric reconstruction. A quadratic exposure-adjustment problem maps feedback into a peer-misalignment penalty ratio. For 52 firms, the field, frozen from 2018-2022 news, yields a 2023-2026 penalty ratio of 3.46 (95% interval [2.89, 4.17]) and higher conditional quasi-likelihood than equal-weighted peer support or RBF weighting of the same distances. Joint penalty ratios for the barycentric and news co-mention fields are 2.33 and 0.86 with boundary calibrated tests which reject both exclusions.

While self-correction has shown promise in improving LLM outputs in terms of style and quality (e.g. Chen et al., 2023; Madaan et al., 2023), recent attempts to self-correct logical or reasoning errors often cause correct answers to become incorrect, resulting in worse performances overall (Huang et al., 2023). In this paper, we break down the self-correction process into two core components: mistake finding and output correction. For mistake finding, we release BIG-Bench Mistake, a dataset of logical mistakes in Chain-of-Thought reasoning traces. We provide benchmark numbers for several state-of-the-art LLMs, and demonstrate that LLMs generally struggle with finding logical mistakes. For output correction, we propose a backtracking method which provides large improvements when given information on mistake location. We construe backtracking as a lightweight alternative to reinforcement learning methods, and show that it remains effective with a reward model at 60-70% accuracy.

LiDAR-inertial odometry (LIO) systems differ in whether they continue estimating gravity after initialization. We compare four gravity-bias state configurations in each of FAST-LIO2 and LIO-SAM, then separately test a gravity-direction factor. Across 12 dataset sequences evaluated with FAST-LIO2, fixing gravity under continuous LiDAR correction produces mean paired changes in vertical and 3D position errors with 90% confidence intervals within pm 2%. Tests on 4 sequences with LIO-SAM likewise show no consistent benefit from online gravity. Multi-second LiDAR outages, unlike reduced range or field of view, reveal trajectory-dependent costs of fixing gravity. A history-matched 23D-to-21D switch places the repeatable 3D error increase after LiDAR updates resume. Under 5-s outages, a direction factor from the same IMU used for preintegration improves accuracy on Hall05 but worsens both errors with online gravity on TUHH. Dynamic-start tests also show fixed-bias failures at particular starting phases. We recommend keeping gravity and accelerometer bias online for robustness; use a direction factor only after verifying vertical and 3D accuracy gains under the intended operating conditions.

Fluid voice-to-voice interaction requires reliable and low-latency detection of when a user has finished speaking. Traditional audio-silence end-pointers add hundreds of milliseconds of delay and fail under hesitations or language-specific phenomena. We present, to our knowledge, the first systematic study of Thai text-only end-of-turn (EOT) detection for real-time agents. We compare zero-shot and few-shot prompting of compact LLMs to supervised fine-tuning of lightweight transformers. Using transcribed subtitles from the YODAS corpus and Thai-specific linguistic cues (e.g., sentence-final particles), we formulate EOT as a binary decision over token boundaries. We report a clear accuracy-latency tradeoff and provide a public-ready implementation plan. This work establishes a Thai baseline and demonstrates that small, fine-tuned models can deliver near-instant EOT decisions suitable for on-device agents.

This paper proposes a new method to infer keypoints from arbitrary object categories in practical scenarios where point cloud data (PCD) are noisy, down-sampled and arbitrarily rotated. Our proposed model adheres to the following principles: i) keypoints inference is fully unsupervised (no annotation given), ii) keypoints position error should be low and resilient to PCD perturbations (robustness), iii) keypoints should not change their indexes for the intra-class objects (semantic coherence), iv) keypoints should be close to or proximal to PCD surface (compactness). We achieve these desiderata by proposing a new self-supervised training strategy for keypoints estimation that does not assume any a priori knowledge of the object class, and a model architecture with coupled auxiliary losses that promotes the desired keypoints properties. We compare the keypoints estimated by the proposed approach with those of the state-of-the-art unsupervised approaches. The experiments show that our approach outperforms by estimating keypoints with improved coverage (+9.41%) while being semantically consistent (+4.66%) that best characterizes the object's 3D shape for downstream tasks. Code and data are available at: https://github.com/IITPAVIS/SC3K

Most real-world 3D measurements from depth sensors are incomplete, and to address this issue the point cloud completion task aims to predict the complete shapes of objects from partial observations. Previous works often adapt an encoder-decoder architecture, where the encoder is trained to extract embeddings that are used as inputs to generate predictions from the decoder. However, the learned embeddings have sparse distribution in the feature space, which leads to worse generalization results during testing. To address these problems, this paper proposes a hyperspherical module, which transforms and normalizes embeddings from the encoder to be on a unit hypersphere. With the proposed module, the magnitude and direction of the output hyperspherical embedding are decoupled and only the directional information is optimized. We theoretically analyze the hyperspherical embedding and show that it enables more stable training with a wider range of learning rates and more compact embedding distributions. Experiment results show consistent improvement of point cloud completion in both single-task and multi-task learning, which demonstrates the effectiveness of the proposed method.

Sparse keypoint matching is crucial for 3D vision tasks, yet current keypoint detectors often produce spatially inaccurate matches. Existing refinement methods mitigate this issue through alignment of matched keypoint locations, but they are typically detector-specific, requiring retraining for each keypoint detector. We introduce XRefine, a novel, detector-agnostic approach for sub-pixel keypoint refinement that operates solely on image patches centered at matched keypoints. Our cross-attention-based architecture learns to predict refined keypoint coordinates without relying on internal detector representations, enabling generalization across detectors. Furthermore, XRefine can be extended to handle multi-view feature tracks. Experiments on MegaDepth, KITTI, and ScanNet demonstrate that the approach consistently improves geometric estimation accuracy, achieving superior performance compared to existing refinement methods while maintaining runtime efficiency. Our code and trained models can be found at https://github.com/boschresearch/xrefine.

LLM agents that compute the right answer can still answer wrongly. Agent harnesses increasingly keep long tool outputs out of the context window, saving them to files that the agent searches or reads on demand. We ask where this costs accuracy with a real scientific tool: PHREEQC, a widely used geochemistry simulator from the USGS, whose reports reach 846.8k characters and whose determinism lets every printed value be traced. Agents use it to answer 158 execution-verified multiple-choice items. When agents read the simulator's report through a section index rather than in context, GPT-5.1 and GPT-5.2 lose 11.3 and 7.9 points of accuracy, while Claude Opus 4.6 and Claude Sonnet 4.6 show no detectable cost. Re-running all 11,007 logged simulator calls shows that both GPT models compute the keyed value about as often as before; what changes is the evidence they answer from. Under retrieval they often skip the report, answer from their own higher-precision output files, and misround to a neighboring option, a failure we call evidence substitution. With the simulation held fixed, retrieval still costs GPT-5.2 9.4 points. For GPT-5.4, more frequent correct simulations mask an evidence-use loss of about ten points, leaving a net change indistinguishable from zero. Naming the authoritative output raises accuracy by 6.3-7.9 points over plain retrieval for the three GPT models; for GPT-5.1 and GPT-5.2, inlining outputs that fit works as well, while asking for correct rounding does not. Context-management choices in agent harnesses should be judged by where accuracy is lost, not only by final accuracy.

We present the findings of "The Alzheimer's Disease Prediction Of Longitudinal Evolution" (TADPOLE) Challenge, which compared the performance of 92 algorithms from 33 international teams at predicting the future trajectory of 219 individuals at risk of Alzheimer's disease. Challenge participants were required to make a prediction, for each month of a 5-year future time period, of three key outcomes: clinical diagnosis, Alzheimer's Disease Assessment Scale Cognitive Subdomain (ADAS-Cog13), and total volume of the ventricles. The methods used by challenge participants included multivariate linear regression, machine learning methods such as support vector machines and deep neural networks, as well as disease progression models. No single submission was best at predicting all three outcomes. For clinical diagnosis and ventricle volume prediction, the best algorithms strongly outperform simple baselines in predictive ability. However, for ADAS-Cog13 no single submitted prediction method was significantly better than random guesswork. Two ensemble methods based on taking the mean and median over all predictions, obtained top scores on almost all tasks. Better than average performance at diagnosis prediction was generally associated with the additional inclusion of features from cerebrospinal fluid (CSF) samples and diffusion tensor imaging (DTI). On the other hand, better performance at ventricle volume prediction was associated with inclusion of summary statistics, such as the slope or maxima/minima of biomarkers. TADPOLE's unique results suggest that current prediction algorithms provide sufficient accuracy to exploit biomarkers related to clinical diagnosis and ventricle volume, for cohort refinement in clinical trials for Alzheimer's disease. However, results call into question the usage of cognitive test scores for patient selection and as a primary endpoint in clinical trials.

Evaluations of LLM systems routinely average over small prompt sets and report models as a ranked table. We ask how much confidence such a table deserves, using LLM-based prompt-structure inference as the case study: eight open model variants across five families and 8B to 675B parameters, caching disabled, 293 raw intermediate representations persisted. The measured phenomenon is unstable to begin with. Identical calls do not reliably recover identical structure, with mean node-set Jaccard from 0.39 to 0.96 and 72% of prompt-model cells never node-set-perfect. Auditing the evaluation weakens its conclusions further, and this is our main contribution. Under a joint cluster bootstrap over prompts, only the bottom of the ranking is firm: the two least reproducible models hold rank in 99% and 86% of replicates, the middle four in 27% to 48%, and the top two in 68% each, so the table identifies the worst model reliably but does not reliably identify the best. Two equally defensible rules for merging repeated campaigns change four of eight rows and move the study-wide headline by 7 percentage points. Checking the inferred structure against ground-truth annotations shows reproducibility cannot be read as accuracy. And four of the eight endpoints were withdrawn within ten weeks of measurement, so the study as specified can no longer be run. Small-sample LLM evaluations can therefore look far more definitive than their evidence supports. We recommend reporting rank stability, per-cell provenance, executed sensitivity comparisons, raw per-run outputs, and a measurement date alongside any ranking.

Outcome-reward reinforcement learning (RL) has proven effective at improving the reasoning capabilities of large language models (LLMs). However, standard RL assigns credit only at the level of the final answer, penalizing entire reasoning traces when the outcome is incorrect and uniformly reinforcing all steps when it is correct. As a result, correct intermediate steps may be discouraged in failed traces, while spurious steps may be reinforced in successful ones. We refer to this failure mode as the problem of credit assignment. While a natural remedy is to train a process reward model, accurately optimizing such models to identify corrective reasoning steps remains challenging. We introduce Intervention Training (InT), a training paradigm in which the model performs fine-grained credit assignment on its own reasoning traces by proposing short, targeted corrections that steer trajectories toward higher reward. Using reference solutions commonly available in mathematical reasoning datasets and exploiting the fact that verifying a model-generated solution is easier than generating a correct one from scratch, the model identifies the first error in its reasoning and proposes a single-step intervention to redirect the trajectory toward the correct solution. We then apply supervised fine-tuning (SFT) to the on-policy rollout up to the point of error concatenated with the intervention, localizing error to the specific step that caused failure. We show that the resulting model serves as a far better initialization for RL training. After running InT and subsequent fine-tuning with RL, we improve accuracy by nearly 14% over a 4B-parameter base model on IMO-AnswerBench, outperforming larger open-source models such as gpt-oss-20b.

Post-training quantization (PTQ) enables efficient deployment of large language models by mapping pretrained weights to low-bit formats without retraining, typically using a small calibration set to minimize a layer-wise calibration objective. However, this sequential procedure induces a mismatch: errors from earlier quantized layers alter the inputs received by later layers, causing the activations to deviate from those of the full-precision model. Recent approaches introduce mismatch-aware calibration objectives to compensate for this effect, but leave open how much of the observed mismatch should shift each layer's calibration target. Fully applying this correction can overfit limited calibration data, while scaling the mismatch correction with a fixed coefficient ignores varying reliability of mismatch estimates across layers. To address these limitations, we propose CoreQ, a learning-free PTQ framework that applies a closed-form coefficient for mismatch correction derived from a geometric decomposition of the mismatch. The resulting coefficient adapts the correction across layers, reduces overfitting to finite calibration data, and requires no hyperparameter tuning. Given the corrected target, CoreQ minimizes the induced triangular least-squares objective with an efficient greedy successive-rounding solver and a bounded beam-search extension, K-CoreQ, that trades modest additional compute for improved performance. Across multiple LLM families, scales, bit-widths, and quantization settings, CoreQ improves perplexity and downstream accuracy over strong PTQ baselines.

Joint-embedding predictive architectures (JEPAs) for world modeling train an encoder so a predictor maps a current embedding and action to the next frame's embedding, always from a single rendered frame. This has a structural blind spot: a renderer without motion blur draws a scene from configuration alone, so a single-frame embedding carries no velocity information, for any encoder, including the official released LeWM weights. We confirm this on official checkpoints across four real benchmarks (PushT, Reacher, Cube, TwoRoom): every linear velocity probe sits at or below chance while position probes reach R^2 about 0.95. We introduce RateIdent, a three-stage diagnostic protocol, and TI-JEPA, a lightweight fix splitting the latent into a pose code and an explicit finite-difference motion code, predicted jointly. Across three physically grounded environments, TI-JEPA gives a significant, seed-robust gain on a stop-at-goal planning task over a matched-memory baseline, e.g. 55% lower final distance on Pendulum (p=3.2x10^-10) and 64% on CartPole (p=5.1x10^-15). We reproduce this at official ViT-Tiny plus AdaLN-transformer scale, then push the same recipe onto real dm_control Reacher photographs trained from scratch, where TI-JEPA's branch separation exceeds the memory-having baseline's by roughly 38x, the paper's largest margin. Against a same-footprint recurrent RSSM-style predictor, TI-JEPA matches or beats its rollout accuracy on two of three environments, stays separately probeable for pose and motion, and wins outright on the most coupled one. A checkable formal argument and six evaluated environments show single-frame targets are the wrong object to predict when velocity matters, and a small, interpretable structural change fixes it with no privileged supervision. Code, checkpoints, and the project page are linked below the title.

Tandem mass spectrometry has played a pivotal role in advancing proteomics, enabling the high-throughput analysis of protein composition in biological tissues. Many deep learning methods have been developed for de novo peptide sequencing task, i.e., predicting the peptide sequence for the observed mass spectrum. However, two key challenges seriously hinder the further advancement of this important task. Firstly, since there is no consensus for the evaluation datasets, the empirical results in different research papers are often not comparable, leading to unfair comparison. Secondly, the current methods are usually limited to amino acid-level or peptide-level precision and recall metrics. In this work, we present the first unified benchmark NovoBench for de novo peptide sequencing, which comprises diverse mass spectrum data, integrated models, and comprehensive evaluation metrics. Recent impressive methods, including DeepNovo, PointNovo, Casanovo, InstaNovo, AdaNovo and pi-HelixNovo are integrated into our framework. In addition to amino acid-level and peptide-level precision and recall, we evaluate the models' performance in terms of identifying post-tranlational modifications (PTMs), efficiency and robustness to peptide length, noise peaks and missing fragment ratio, which are important influencing factors while seldom be considered. Leveraging this benchmark, we conduct a large-scale study of current methods, report many insightful findings that open up new possibilities for future development.

In this paper, we present the MetricX-24 submissions to the WMT24 Metrics Shared Task and provide details on the improvements we made over the previous version of MetricX. Our primary submission is a hybrid reference-based/-free metric, which can score a translation irrespective of whether it is given the source segment, the reference, or both. The metric is trained on previous WMT data in a two-stage fashion, first on the DA ratings only, then on a mixture of MQM and DA ratings. The training set in both stages is augmented with synthetic examples that we created to make the metric more robust to several common failure modes, such as fluent but unrelated translation, or undertranslation. We demonstrate the benefits of the individual modifications via an ablation study, and show a significant performance increase over MetricX-23 on the WMT23 MQM ratings, as well as our new synthetic challenge set.

Asynchronous reinforcement learning improves rollout throughput for large language model agents by decoupling sample generation from policy optimization, but it also introduces a critical failure mode for PPO-style off-policy correction. In heterogeneous training systems, the total importance ratio should ideally be decomposed into two semantically distinct factors: a training--inference discrepancy term that aligns inference-side and training-side distributions at the same behavior-policy version, and a policy-staleness term that constrains the update from the historical policy to the current policy. We show that practical asynchronous pipelines with delayed updates and partial rollouts often lose the required historical training-side logits, or old logits. This missing-old-logit problem entangles discrepancy repair with staleness correction, breaks the intended semantics of decoupled correction, and makes clipping and masking thresholds interact undesirably. To address this issue, we study both exact and approximate correction routes. We propose three exact old-logit acquisition strategies: snapshot-based version tracking, a dedicated old-logit model, and synchronization via partial rollout interruption, and compare their system trade-offs. From the perspective of approximate correction, we focus on preserving the benefits of decoupled correction through a more appropriate approximate policy when exact old logits cannot be recovered at low cost, without incurring extra system overhead. Following this analysis, we adopt a revised PPO-EWMA method, which achieves significant gains in both training speed and optimization performance. Code at https://github.com/millioniron/ROLL.

Correcting health misinformation in dialogue requires more than producing a factual rebuttal: users differ in what they know, what they believe, and what they need to hear, so an effective intervention often depends on first asking the right clarifying question. Yet existing methods either respond immediately or probe indiscriminately, treating clarification as either unnecessary or always beneficial. We propose Reward-Optimized Probe-and-Respond (RO-PnR), a framework that learns when asking is worth its cost. At each turn, RO-PnR chooses between probing for more information and committing to a final correction, guided by a turn-level reward that weighs the expected gain from probing against its interaction cost. To capture how user heterogeneity affects probing value, we model each simulated user with a latent state along health literacy and belief commitment. Experiments show that RO-PnR achieves the highest cost-adjusted utility across three health-misinformation datasets and three base models, using 30% fewer turns than always-probe baselines.

AI-search evaluation commonly treats a prompt as a stable query that can be counted, classified, and replayed in isolation. A conversation makes that unit of analysis questionable: each user turn can add a constraint, revise an assumption, request evidence, or refer to alternatives established earlier. We replace latent "intent" with an observable construct, conversation-conditioned request state, and measure how that state is distributed across user turns. The analysis reuses frozen rules and the governed cohort of a preceding conversation study: 670 English commercial multi-turn conversations in a discovery-replication design and 7,463 public PRISM conversations from 1,389 participants. In the commercial corpus, the final prompt contains a median 35.6% of the session's unique user-side content vocabulary; in PRISM, the median is 36.4%. The final prompt contains at most half of that vocabulary in 68.4% and 74.3% of conversations, respectively. More importantly, transparent rules detect at least one request-state dimension in history but not in the final prompt in 50.3% of commercial conversations and 44.8% of PRISM conversations. Among dimension-bearing conversations, the final prompt reproduces the full observed dimension set in only 26.1% and 26.2%. At the same time, the final prompt adds a previously unseen dimension in 17.9% and 19.3%, showing that the endpoint is neither a summary nor merely a reference: it is often another state update. Length-matched nulls show that low lexical coverage is largely a consequence of turn length, so vocabulary results are interpreted as information availability, not semantic drift. The categorical results support session-level measurement for AI search. They do not estimate the causal effect of history on model answers.

Self-correction has demonstrated potential in code generation by allowing language models to revise and improve their outputs through successive refinement. Recent studies have explored prompting-based strategies that incorporate verification or feedback loops using proprietary models, as well as training-based methods that leverage their strong reasoning capabilities. However, whether smaller models possess the capacity to effectively guide their outputs through self-reflection remains unexplored. Our findings reveal that smaller models struggle to exhibit reflective revision behavior across both self-correction paradigms. In response, we introduce CoCoS, an approach designed to enhance the ability of small language models for multi-turn code correction. Specifically, we propose an online reinforcement learning objective that trains the model to confidently maintain correct outputs while progressively correcting incorrect outputs as turns proceed. Our approach features an accumulated reward function that aggregates rewards across the entire trajectory and a fine-grained reward better suited to multi-turn correction scenarios. This facilitates the model in enhancing initial response quality while achieving substantial improvements through self-correction. With 1B-scale models, CoCoS achieves improvements of 35.8% on the MBPP and 27.7% on HumanEval compared to the baselines.

Point Cloud Quality Assessment (PCQA) methods typically predict scalar Mean Opinion Scores (MOS), which quantify overall perceptual degradation but do not reveal its causes. In contrast, human observers naturally reason in terms of specific distortions such as blur, color shifts, point density changes, missing regions, and geometric deformations. To close this gap, we introduce DAL-PCQA, a distortion-aware, language-annotated dataset for PCQA. DAL-PCQA augments benchmark point clouds with multi-level distortion severity labels, discrete quality categories, and structured natural language descriptions aligned with human perception. We define a point-cloud-specific distortion taxonomy that covers both photometric and geometric artifacts. Statistical analysis reveals characteristic degradation patterns across distortion types and quality levels. To assess the utility of these annotations, we compare zero-shot and fine-tuned multimodal models for generating perceptual quality descriptions. Experiments show that distortion-aware supervision substantially improves lexical and semantic alignment with ground-truth descriptions. By enabling interpretable, distortion-level reasoning, DAL-PCQA facilitates language-driven, explainable point cloud quality assessment. The dataset is publicly available at https://github.com/swarna96/DAL-PCQA.

Long-horizon agentic tasks require an agent to modify an environment through a sequence of tool calls, with success determined by the final state. The standard recipe assigns a single outcome reward at the end and compares trajectories sampled for the same task. As a result, a group with no successful trajectory yields no training signal, failed attempts cannot be told apart by how close they came to completion, and turns that advance the task receive the same credit as turns that only query the environment. Prior work refines the unit of comparison from the trajectory to the step, or trains a reward model to supply intermediate signal: the former still derives its signal from final success alone, and the latter estimates it with a model. We observe that the acceptance checks that decide success can also be run on intermediate states, so progress is as verifiable as the outcome. We propose ProCredit, which turns this verified progress into credit: it reruns the acceptance checks after each turn, rewards the turn by its change in progress, and uses these rewards to assign credit both across attempts at the same task and across the turns within a trajectory. Starting from Qwen3.5 base models at three scales on AppWorld, ProCredit outperforms outcome-reward baselines and progress-based baselines in task completion rate at every scale on both test sets, exceeding the strongest outcome-reward baseline by 4.1 percentage points at 4B, and results in a second environment show the same direction of improvement. Ablations show that adding the final progress to the trajectory score alone does not improve performance: the gain comes from crediting progress to the turn where it occurs.

Position bias has proven to be a prevalent issue of modern language models (LMs), where the models prioritize content based on its position within the given context. This bias often leads to unexpected model failures and hurts performance, robustness, and reliability across various applications. Our mechanistic analysis attributes the position bias to two components employed in nearly all state-of-the-art LMs: causal attention and relative positional encodings. Specifically, we find that causal attention generally causes models to favor distant content, while relative positional encodings like RoPE prefer nearby ones based on the analysis of retrieval-augmented question answering (QA). Further, our empirical study on object detection reveals that position bias is also present in vision-language models (VLMs). Based on the above analyses, we propose to ELIMINATE position bias caused by different input segment orders (e.g., options in LM-as-a-judge, retrieved documents in QA) in a TRAINING-FREE ZERO-SHOT manner. Our method changes the causal attention to bidirectional attention between segments and utilizes model attention values to decide the relative orders of segments instead of using the order provided in input prompts, therefore enabling Position-INvariant inferencE (PINE) at the segment level. By eliminating position bias, models achieve better performance and reliability in downstream tasks where position bias widely exists, such as LM-as-a-judge and retrieval-augmented QA. Notably, PINE is especially useful when adapting LMs for evaluating reasoning pairs: it consistently provides 8 to 10 percentage points performance gains in most cases, and makes Llama-3-70B-Instruct perform even better than GPT-4-0125-preview on the RewardBench reasoning subset.

Large language models (LLMs) deliver strong performance, but their high compute and memory costs make deployment difficult in resource-constrained scenarios. Weight-only post-training quantization (PTQ) is appealing, as it reduces memory usage and enables practical speedup without low-bit operators or specialized hardware. However, accuracy often degrades significantly in weight-only PTQ at sub-4-bit precision, and our analysis identifies two main causes: (1) down-projection matrices are a well-known quantization bottleneck, but maintaining their fidelity often requires extra bit-width; (2) weight quantization induces activation deviations, but effective correction strategies remain underexplored. To address these issues, we propose D^2Quant, a novel weight-only PTQ framework that improves quantization from both the weight and activation perspectives. On the weight side, we design a Dual-Scale Quantizer (DSQ) tailored to down-projection matrices, with an absorbable scaling factor that significantly improves accuracy without increasing the bit budget. On the activation side, we propose Deviation-Aware Correction (DAC), which incorporates a mean-shift correction within LayerNorm to mitigate quantization-induced activation distribution shifts. Extensive experiments across multiple LLM families and evaluation metrics show that D^2Quant delivers superior performance for weight-only PTQ at sub-4-bit precision. The code and models will be available at https://github.com/XIANGLONGYAN/D2Quant.

Spoken dialogue models have significantly advanced intelligent human-computer interaction, yet they lack a plug-and-play full-duplex prediction module for semantic endpoint detection, hindering seamless audio interactions. In this paper, we introduce Phoenix-VAD, an LLM-based model that enables streaming semantic endpoint detection. Specifically, Phoenix-VAD leverages the semantic comprehension capability of the LLM and a sliding window training strategy to achieve reliable semantic endpoint detection while supporting streaming inference. Experiments on both semantically complete and incomplete speech scenarios indicate that Phoenix-VAD achieves excellent and competitive performance. Furthermore, this design enables the full-duplex prediction module to be optimized independently of the dialogue model, providing more reliable and flexible support for next-generation human-computer interaction.

This work proposes an end-to-end neural interactive keypoint detection framework named Click-Pose, which can significantly reduce more than 10 times labeling costs of 2D keypoint annotation compared with manual-only annotation. Click-Pose explores how user feedback can cooperate with a neural keypoint detector to correct the predicted keypoints in an interactive way for a faster and more effective annotation process. Specifically, we design the pose error modeling strategy that inputs the ground truth pose combined with four typical pose errors into the decoder and trains the model to reconstruct the correct poses, which enhances the self-correction ability of the model. Then, we attach an interactive human-feedback loop that allows receiving users' clicks to correct one or several predicted keypoints and iteratively utilizes the decoder to update all other keypoints with a minimum number of clicks (NoC) for efficient annotation. We validate Click-Pose in in-domain, out-of-domain scenes, and a new task of keypoint adaptation. For annotation, Click-Pose only needs 1.97 and 6.45 NoC@95 (at precision 95%) on COCO and Human-Art, reducing 31.4% and 36.3% efforts than the SOTA model (ViTPose) with manual correction, respectively. Besides, without user clicks, Click-Pose surpasses the previous end-to-end model by 1.4 AP on COCO and 3.0 AP on Human-Art. The code is available at https://github.com/IDEA-Research/Click-Pose.

With PRECISE, we extended Prediction-Powered Inference to produce bias-corrected estimates of ranking evaluation metrics by combining a small human-labeled set with a large LLM-judged set. PPI is provably unbiased regardless of the LLM judge's error profile. We make it applicable to hierarchical metrics like Precision@K, where annotations are per-document but the metric is per-query, by reducing the output-space computation from O(2^|C|) to O(2^K). On the ESCI benchmark, augmenting 30 human annotations with Claude 3 Sonnet judgments reduces the standard error of Precision@4 estimates from 4.45 to 3.50 (a 21% relative reduction). In a production system, our framework correctly identified the best of three system variants from 100 human labels and 2 hours of domain-expert annotation; A/B testing confirmed this ranking with +407 bps in daily sales.

We study the accuracy of Gauss-Newton curvature in ridge-regularized nonlinear least squares. Under local regularity and persistence of level-set curvature magnitude along an exact-fit section, we prove uniform coexistence of two curvature regimes. Global minimizers exist, and every global minimizer has relative Hessian error below (1+sqrt2)/8, while the same low-cost set contains a point with an indefinite Hessian and relative error at least 15/8. One positive ridge cap works for all independent center and label perturbations in fixed neighborhoods and every positive ridge weight up to the cap. These neighborhoods do not shrink as the ridge weight tends to zero. A pointwise certificate based on the current prediction level set controls the normal, mixed, and tangent parts of the Hessian correction. We prove a sharp relative-error bound over the stated pointwise class when the prediction map and ridge vary. Analytic examples describe the roles of output alignment, curvature orientation, and persistence. A separate structural result gives full Jacobian row rank throughout low-cost sets and exact interpolation near a rank-deficient reference.

Prior work in parameter-modifying knowledge editing has shown that large-scale sequential editing leads to significant model degradation. In this paper, we study the reasons behind this and scale sequential knowledge editing to 10,000 sequential edits, while maintaining the downstream performance of the original model. We first show that locate-then-edit knowledge editing methods lead to overfitting on the edited facts. We also show that continuous knowledge editing using these methods leads to disproportionate growth in the norm of the edited matrix. We then provide a crucial insight into the inner workings of locate-then-edit methods. We show that norm-growth is a hidden trick employed by these methods that gives larger importance to the output activations produced from the edited layers. With this "importance hacking", the edited layers provide a much larger contributions to the model's output. To mitigate these issues, we present ENCORE - Early stopping and Norm-Constrained Robust knowledge Editing. ENCORE controls for overfitting and the disproportionate norm-growth to enable long-term sequential editing, where we are able to perform up to 10,000 sequential edits without loss of downstream performance. ENCORE is also 61% faster than MEMIT and 64% faster than AlphaEdit on Llama3-8B.

Model editing has emerged as a practical approach for mitigating factual errors and outdated knowledge in large language models (LLMs). Among existing methods, the Locate-and-Edit (L&E) paradigm is the dominant framework: it locates MLP parameters implicated in expressing a target fact, and then performs a localized update to rewrite that fact. However, long sequences of edits often trigger abrupt model collapse in L&E beyond a critical point. We empirically identify a strong correlation between collapse and explosive growth of edited MLP weight norms, and formally prove that commonly used L&E update rules can induce exponential norm growth across sequential edits in the absence of explicit norm control. To address this issue, we propose Norm-Anchor Scaling NAS, a plug-and-play norm-constrained strategy. Across extensive experiments, NAS delays the collapse point of representative L&E algorithms by more than 4 times and yields a 72.2% average relative gain in editing performance, requiring only a single additional line of code and incurring negligible computational overhead.

Reality may establish that an outcome occurred without identifying which evolving procedure produced it or why. This distinction matters in production ML systems whose code, configuration, and artifacts change while external feedback accumulates. We examine it in a human-directed, agent-engineered quantitative trading system, using oracle to mean an external source of realized outcomes rather than a complete correctness specification. Across one year, the account gained and outperformed a broad market index, while annual alpha was not statistically distinguishable from zero under the main retrospective specification. Retrospectively selected subperiods include adverse relative performance and conditional candidate-level weakness under declared approximate references. Engineering records document changes during the episode, and complete recommendation-to-runtime binding is unavailable. The archive does not establish a common frozen instance or a unique cause. The case motivates an outcome--diagnosis gap: outcome evidence, evaluated-object identity, and causal explanation support distinct claims. We distinguish frozen instances, pre-specified adaptive procedures, and ad-hoc development; organize archive-relative claim identifiability and an evidence hierarchy; and propose a prospective production-binding protocol. An illustrative compatible-history example shows how factual binding can resolve a recommendation's referent without supplying its counterfactual effect. The protocol is proposed rather than prospectively validated. External feedback constrains outcome claims, while provenance and additional identification structure determine the resolution of diagnosis.

Point cloud completion aims to recover accurate global geometry and preserve fine-grained local details from partial point clouds. Conventional methods typically predict unseen points directly from 3D point cloud coordinates or use self-projected multi-view depth maps to ease this task. However, these gray-scale depth maps cannot reach multi-view consistency, consequently restricting the performance. In this paper, we introduce a GeoFormer that simultaneously enhances the global geometric structure of the points and improves the local details. Specifically, we design a CCM Feature Enhanced Point Generator to integrate image features from multi-view consistent canonical coordinate maps (CCMs) and align them with pure point features, thereby enhancing the global geometry feature. Additionally, we employ the Multi-scale Geometry-aware Upsampler module to progressively enhance local details. This is achieved through cross attention between the multi-scale features extracted from the partial input and the features derived from previously estimated points. Extensive experiments on the PCN, ShapeNet-55/34, and KITTI benchmarks demonstrate that our GeoFormer outperforms recent methods, achieving the state-of-the-art performance. Our code is available at https://github.com/Jinpeng-Yu/GeoFormer{https://github.com/Jinpeng-Yu/GeoFormer}.

Long-horizon search requires agents to acquire relevant evidence and integrate it into an evolving research state. Existing methods maintain research states to guide exploration or assign turn-level progress signals, yet grounding these signals in explicit, attributable state changes remains underexplored. We introduce ClueFlow, which learns long-horizon search from attributed research-state transitions. ClueFlow constructs Source-State-Final attribution chains that connect evidence-acquiring browser actions, Evidence and Candidate updates, and the final answer supported by those updates. During search, ClueFlow records typed state changes and potentially supporting browser actions, then applies gold-conditioned semantic validation and source tracing after execution. We use this attribution to guide both supervised fine-tuning and reinforcement learning. During SFT, attribution selects which decisions receive supervision with their original interaction contexts. During Turn-PPO, the same attribution augments outcome-based turn advantages with credit assigned along the Source-State-Final chains. Transition-level validation also recovers useful supervision from gold-consistent state changes in trajectories with incorrect final answers. We evaluate ClueFlow across two Qwen backbones and four search benchmarks spanning live-web and fixed-corpus settings, observing consistent gains from SFT and further improvements from PPO. With Qwen3.5-35B-A3B, ClueFlow achieves 60.0% accuracy on BrowseComp and 72.0% on BrowseComp-Plus. In controlled BrowseComp-Plus experiments, attribution-guided SFT matches all-turn exact-context SFT using about 30% of the training tokens, while attribution-guided PPO outperforms outcome-only PPO by 4.1 pp. These results demonstrate that state-transition attribution enables efficient supervision and effective credit assignment for long-horizon search agents.

Practical LLM unlearning is usually evaluated through two objectives: suppress target-specific knowledge and preserve non-target utility. In generative QA, this leaves a third behavior underspecified: when a target-adjacent prompt admits a broader answer without target-specific leakage, the model should answer at that level rather than leak, evade, or refuse. We study this specification problem in a controlled LoRA-GRPO RWKU setting, comparing four reward designs that span lexical suppression, anti-refusal shaping, rubric-based broad answering, and an explicit refusal contrast, with and without SFT warm-up. The experiments show that optimization success is not equivalent to behavioral unlearning: RWKU forget scores, held-out completion audits, terminal training-rollout audits, and training dynamics can point to different conclusions. We trace these disagreements to reward-hacking endpoints, policy-support limits in GRPO, benchmark probes that miss endpoint changes, and rewards that can select broad-topic answering with low semantic leakage during optimization.

This work introduces BEV-LIO(LC), a novel LiDAR-Inertial Odometry (LIO) framework that combines Bird's Eye View (BEV) image representations of LiDAR data with geometry-based point cloud registration and incorporates loop closure (LC) through BEV image features. By normalizing point density, we project LiDAR point clouds into BEV images, thereby enabling efficient feature extraction and matching. A lightweight convolutional neural network (CNN) based feature extractor is employed to extract distinctive local and global descriptors from the BEV images. Local descriptors are used to match BEV images with FAST keypoints for reprojection error construction, while global descriptors facilitate loop closure detection. Reprojection error minimization is then integrated with point-to-plane registration within an iterated Extended Kalman Filter (iEKF). In the back-end, global descriptors are used to create a KD-tree-indexed keyframe database for accurate loop closure detection. When a loop closure is detected, Random Sample Consensus (RANSAC) computes a coarse transform from BEV image matching, which serves as the initial estimate for Iterative Closest Point (ICP). The refined transform is subsequently incorporated into a factor graph along with odometry factors, improving the global consistency of localization. Extensive experiments conducted in various scenarios with different LiDAR types demonstrate that BEV-LIO(LC) outperforms state-of-the-art methods, achieving competitive localization accuracy. Our code, video and supplementary materials can be found at https://github.com/HxCa1/BEV-LIO-LC.