new

Get trending papers in your email inbox!

Subscribe

Daily Papers

byAK and the research community

Nov 18

ReynoldsFlow: Exquisite Flow Estimation via Reynolds Transport Theorem

Optical flow is a fundamental technique for motion estimation, widely applied in video stabilization, interpolation, and object tracking. Traditional optical flow estimation methods rely on restrictive assumptions like brightness constancy and slow motion constraints. Recent deep learning-based flow estimations require extensive training on large domain-specific datasets, making them computationally demanding. Also, artificial intelligence (AI) advances have enabled deep learning models to take advantage of optical flow as an important feature for object tracking and motion analysis. Since optical flow is commonly encoded in HSV for visualization, its conversion to RGB for neural network processing is nonlinear and may introduce perceptual distortions. These transformations amplify the sensitivity to estimation errors, potentially affecting the predictive accuracy of the networks. To address these challenges that are influential to the performance of downstream network models, we propose Reynolds flow, a novel training-free flow estimation inspired by the Reynolds transport theorem, offering a principled approach to modeling complex motion dynamics. In addition to conventional HSV-based visualization of Reynolds flow, we also introduce an RGB-encoded representation of Reynolds flow designed to improve flow visualization and feature enhancement for neural networks. We evaluated the effectiveness of Reynolds flow in video-based tasks. Experimental results on three benchmarks, tiny object detection on UAVDB, infrared object detection on Anti-UAV, and pose estimation on GolfDB, demonstrate that networks trained with RGB-encoded Reynolds flow achieve SOTA performance, exhibiting improved robustness and efficiency across all tasks.

  • 2 authors
·
Mar 6, 2025

When Does q-error Predict Plan Regret? Three Regimes of Cardinality-Estimation Error

Cardinality-estimation (CE) research ranks estimators by q-error, yet it is well known that q-error is an imperfect proxy for query-plan quality. We give a measurement-driven account of when it is a good proxy and when it is not, and why. Modeling plan selection as an argmin over a piecewise-linear cost landscape, we find that plan regret (the cost of the chosen plan relative to the optimal, under true cardinalities) is governed by plan-cost geometry in a regime-dependent way. (i) For small errors, a true-point condition number kappa predicts regret and out-predicts q-error; its predictive power decays to zero as error grows, as a local linearization must. (ii) For large errors -- where deployed learned estimators operate -- an estimator-independent average-case sub-optimality measure ACS-infinity predicts which queries are regret-prone (Spearman rho ~ 0.54 on STATS-CEB), while q-error is nearly uninformative at the query level (rho ~ 0.05). (iii) The worst case is Haritsa's maximum sub-optimality (MSO). The three are one cost-ratio spectrum under three weightings. We prove a limit law ACS-infinity = sum_k r_k pi_k with cardinality-independent combinatorial weights, and validate every claim on STATS-CEB and JOB-light with four released estimators under pre-registered decision rules, and confirm on real PostgreSQL runtime that ACS-infinity predicts regret where q-error does not. The contribution is conceptual and empirical -- an average-case companion to worst-case robust query optimization, and a characterization of when an accuracy metric tracks plan quality -- rather than a new estimator. Code and the full pre-registration are public.

  • 2 authors
·
Jun 13

LAN-HDR: Luminance-based Alignment Network for High Dynamic Range Video Reconstruction

As demands for high-quality videos continue to rise, high-resolution and high-dynamic range (HDR) imaging techniques are drawing attention. To generate an HDR video from low dynamic range (LDR) images, one of the critical steps is the motion compensation between LDR frames, for which most existing works employed the optical flow algorithm. However, these methods suffer from flow estimation errors when saturation or complicated motions exist. In this paper, we propose an end-to-end HDR video composition framework, which aligns LDR frames in the feature space and then merges aligned features into an HDR frame, without relying on pixel-domain optical flow. Specifically, we propose a luminance-based alignment network for HDR (LAN-HDR) consisting of an alignment module and a hallucination module. The alignment module aligns a frame to the adjacent reference by evaluating luminance-based attention, excluding color information. The hallucination module generates sharp details, especially for washed-out areas due to saturation. The aligned and hallucinated features are then blended adaptively to complement each other. Finally, we merge the features to generate a final HDR frame. In training, we adopt a temporal loss, in addition to frame reconstruction losses, to enhance temporal consistency and thus reduce flickering. Extensive experiments demonstrate that our method performs better or comparable to state-of-the-art methods on several benchmarks.

  • 2 authors
·
Aug 21, 2023

VTAM: Video-Tactile-Action Models for Complex Physical Interaction Beyond VLAs

Video-Action Models (VAMs) have emerged as a promising framework for embodied intelligence, learning implicit world dynamics from raw video streams to produce temporally consistent action predictions. Although such models demonstrate strong performance on long-horizon tasks through visual reasoning, they remain limited in contact-rich scenarios where critical interaction states are only partially observable from vision alone. In particular, fine-grained force modulation and contact transitions are not reliably encoded in visual tokens, leading to unstable or imprecise behaviors. To bridge this gap, we introduce the Video-Tactile Action Model (VTAM), a multimodal world modeling framework that incorporates tactile perception as a complementary grounding signal. VTAM augments a pretrained video transformer with tactile streams via a lightweight modality transfer finetuning, enabling efficient cross-modal representation learning without tactile-language paired data or independent tactile pretraining. To stabilize multimodal fusion, we introduce a tactile regularization loss that enforces balanced cross-modal attention, preventing visual latent dominance in the action model. VTAM demonstrates superior performance in contact-rich manipulation, maintaining a robust success rate of 90 percent on average. In challenging scenarios such as potato chip pick-and-place requiring high-fidelity force awareness, VTAM outperforms the pi 0.5 baseline by 80 percent. Our findings demonstrate that integrating tactile feedback is essential for correcting visual estimation errors in world action models, providing a scalable approach to physically grounded embodied foundation models.

Structural and Convergence Analysis of Discrete-Time Denoising Diffusion Probabilistic Models

This paper studies the original discrete-time denoising diffusion probabilistic model (DDPM) from a probabilistic point of view. We present three main theoretical results. First, we show that the time-dependent score function associated with the forward diffusion process admits a characterization as the backward component of a forward--backward stochastic differential equation (FBSDE). This result provides a structural description of the score function and clarifies how score estimation errors propagate along the reverse-time dynamics. As a by-product, we also obtain a system of semilinear parabolic PDEs for the score function. Second, we use tools from Schrödinger's problem to relate distributional errors arising in reverse time to corresponding errors in forward time. This approach allows us to control the reverse-time sampling error in a systematic way. Third, combining these results, we derive an explicit upper bound for the total variation distance between the sampling distribution of the discrete-time DDPM algorithm and the target data distribution under general finite noise schedules. The resulting bound separates the contributions of the learning error and the time discretization error. Our analysis highlights the intrinsic probabilistic structure underlying discrete-time DDPMs and provides a clearer understanding of the sources of error in their sampling procedure.

  • 1 authors
·
Jan 9

CoDiff: Conditional Diffusion Model for Collaborative 3D Object Detection

Collaborative 3D object detection holds significant importance in the field of autonomous driving, as it greatly enhances the perception capabilities of each individual agent by facilitating information exchange among multiple agents. However, in practice, due to pose estimation errors and time delays, the fusion of information across agents often results in feature representations with spatial and temporal noise, leading to detection errors. Diffusion models naturally have the ability to denoise noisy samples to the ideal data, which motivates us to explore the use of diffusion models to address the noise problem between multi-agent systems. In this work, we propose CoDiff, a novel robust collaborative perception framework that leverages the potential of diffusion models to generate more comprehensive and clearer feature representations. To the best of our knowledge, this is the first work to apply diffusion models to multi-agent collaborative perception. Specifically, we project high-dimensional feature map into the latent space of a powerful pre-trained autoencoder. Within this space, individual agent information serves as a condition to guide the diffusion model's sampling. This process denoises coarse feature maps and progressively refines the fused features. Experimental study on both simulated and real-world datasets demonstrates that the proposed framework CoDiff consistently outperforms existing relevant methods in terms of the collaborative object detection performance, and exhibits highly desired robustness when the pose and delay information of agents is with high-level noise. The code is released at https://github.com/HuangZhe885/CoDiff

  • 4 authors
·
Feb 16, 2025

Brick-Composer: Using MLLMs for Assembly with Diverse Bricks

We dream of AI agents that can read arbitrary designs and construct real-world objects from reusable building blocks. As a first step toward this vision, we study whether multimodal large language models (MLLMs) possess the visual grounding and spatial reasoning capabilities required for brick assembly. We formulate brick assembly as a sequential decision-making problem, where each step involves two subtasks: brick selection, identifying the target brick from candidate components, and brick pose estimation, predicting where and how the selected brick should be placed. To support this study, we introduce BC-Bench (Brick Construction Benchmark), the first benchmark for evaluating MLLMs on assembly with diverse bricks. Experiments show that current state-of-the-art MLLMs remain far from reliable builders, struggling with fine-grained brick selection and failing at precise pose estimation. To bridge this gap, we propose Brick-Composer, a learning framework that equips MLLMs with assembly skills through three complementary signals: Human Design Sparks, which provide affordance-rich construction demonstrations; World Feedback, which grounds predicted actions in visual and physical consequences; and Synthetic Experience, which scales learning beyond existing object designs. Brick-Composer improves brick selection accuracy by over three times, substantially reduces pose estimation errors, and raises strict step-level assembly success from less than 1% to around 15%. After training, a Qwen-3-8B can correctly compose up to 42% of the steps for a complete object, suggesting that MLLMs can acquire assembly capabilities through targeted, physically grounded learning.

  • 11 authors
·
Jun 2

Load Testing for Machine Learning Model Serving Systems at Scale

Machine learning (ML) model serving has become a dominant consumer of GPU infrastructure, yet capacity planning in these systems remains largely ad hoc. Under-provisioning leads to service-level objective (SLO) violations and production incidents, while over-provisioning results in substantial resource waste. This paper presents \sys, an industrial load testing framework for ML serving systems that systematically estimates serving capacity through an adaptive, feedback-driven search strategy. The approach leverages real-time performance signals, incorporating dampening, spike tolerance, and convergence detection to efficiently identify maximum sustainable throughput under SLO constraints. We evaluate \sys through a longitudinal analysis of 14 industrial case studies spanning four ML architecture classes: recommendation, ranking, vision, and NLP. This study demonstrates that systematic load testing leads to substantial improvements in GPU resource efficiency and operational reliability. Prior to adopting \sys, a significant fraction of model launches were under-provisioned, resulting in recurring incidents; these issues were substantially reduced after deployment. Our results show that ML-specific design decisions are critical to accurate capacity estimation: workload calibration using recorded traffic reduces estimation error from approximately 30\% to 2--6\%, while proper warmup handling yields a 22.2\% improvement in accuracy. Further analysis reveals key factors influencing prediction error, including model size and co-location effects. This paper distills six lessons and derive architectural guidelines for ML load testing, offering actionable insights for building reliable and efficient ML serving systems.

  • 7 authors
·
Jun 19

Convex-Hull-Neighborhood Smooth Dual Generalization: Controlling Local Correction Propagation in Offline RL

Offline reinforcement learning (offline RL) can benefit from nearby out-of-distribution (OOD) actions, but estimation errors at these actions may be amplified by bootstrapping. Existing regularization and local-generalization methods control either the admissible OOD region or the influence of generalized targets, often through separate mechanisms. We propose Convex Hull Neighborhood Smooth Dual Generalization (CSDG), which expresses the Bellman backup as an in-sample value target plus a CHN-local correction. This formulation makes the generalized contribution explicit and separates it from the in-sample reference path. The correction is obtained by smoothing in-sample-oriented and OOD-oriented candidates sampled at different perturbation radii. A mixture coefficient lambda scales its contribution to each backup, while the recursive discount remains gamma. Under boundedness and fixed perturbation kernels, we derive an exact one-step correction identity, a time-varying iterate bound, and a fixed-point bound that depends only on the branch discrepancy at the fixed point. We further characterize the implicit policies induced by the idealized operators and give a conditional non-degradation criterion. The practical algorithm approximates these quantities using asymmetric bounded noise and expectile regression, without exact support classification or an additional pessimistic OOD penalty. Experiments on Gym-MuJoCo and AntMaze show strong aggregate performance and stable value estimation. Code is available at: https://github.com/YOUNG-fnxm/CSDG

  • 6 authors
·
Aug 3

HGSFusion: Radar-Camera Fusion with Hybrid Generation and Synchronization for 3D Object Detection

Millimeter-wave radar plays a vital role in 3D object detection for autonomous driving due to its all-weather and all-lighting-condition capabilities for perception. However, radar point clouds suffer from pronounced sparsity and unavoidable angle estimation errors. To address these limitations, incorporating a camera may partially help mitigate the shortcomings. Nevertheless, the direct fusion of radar and camera data can lead to negative or even opposite effects due to the lack of depth information in images and low-quality image features under adverse lighting conditions. Hence, in this paper, we present the radar-camera fusion network with Hybrid Generation and Synchronization (HGSFusion), designed to better fuse radar potentials and image features for 3D object detection. Specifically, we propose the Radar Hybrid Generation Module (RHGM), which fully considers the Direction-Of-Arrival (DOA) estimation errors in radar signal processing. This module generates denser radar points through different Probability Density Functions (PDFs) with the assistance of semantic information. Meanwhile, we introduce the Dual Sync Module (DSM), comprising spatial sync and modality sync, to enhance image features with radar positional information and facilitate the fusion of distinct characteristics in different modalities. Extensive experiments demonstrate the effectiveness of our approach, outperforming the state-of-the-art methods in the VoD and TJ4DRadSet datasets by 6.53% and 2.03% in RoI AP and BEV AP, respectively. The code is available at https://github.com/garfield-cpp/HGSFusion.

  • 7 authors
·
Dec 15, 2024

Explainable AI for Accelerated Microstructure Imaging: A SHAP-Guided Protocol on the Connectome 2.0 scanner

The diffusion MRI Neurite Exchange Imaging model offers a promising framework for probing gray matter microstructure by estimating parameters such as compartment sizes, diffusivities, and inter-compartmental water exchange time. However, existing protocols require long scan times. This study proposes a reduced acquisition scheme for the Connectome 2.0 scanner that preserves model accuracy while substantially shortening scan duration. We developed a data-driven framework using explainable artificial intelligence with a guided recursive feature elimination strategy to identify an optimal 8-feature subset from a 15-feature protocol. The performance of this optimized protocol was validated in vivo and benchmarked against the full acquisition and alternative reduction strategies. Parameter accuracy, preservation of anatomical contrast, and test-retest reproducibility were assessed. The reduced protocol yielded parameter estimates and cortical maps comparable to the full protocol, with low estimation errors in synthetic data and minimal impact on test-retest variability. Compared to theory-driven and heuristic reduction schemes, the optimized protocol demonstrated superior robustness, reducing the deviation in water exchange time estimates by over two-fold. In conclusion, this hybrid optimization framework enables viable imaging of neurite exchange in 14 minutes without loss of parameter fidelity. This approach supports the broader application of exchange-sensitive diffusion magnetic resonance imaging in neuroscience and clinical research, and offers a generalizable method for designing efficient acquisition protocols in biophysical parameter mapping.

  • 13 authors
·
Sep 11, 2025

When Quantization Breaks Memory: Recurrent-State Write-Back in Low-Precision Temporal Inference

Quantization is widely used to reduce the computational and memory demands of neural-network inference. In recurrent networks, however, the quantized state is stored and returned at the next time step, so the rule used to store that state can alter subsequent computations. Here, we introduce recurrent-state write-back to denote this rule and isolate its effect in a compact GRU encoder--decoder for fluorescence lifetime imaging, a molecular imaging modality used in quantitative biological imaging. A central task is estimating two lifetime parameters, the short-lived component τ1 and the long-lived component τ2, from high-noise time-resolved fluorescence signals. Holding the trained model fixed, replacing continuous state propagation with deterministic 4-bit state storage increases estimation errors for τ1 and τ2 by approximately 70x and 300x, respectively. Failure occurs when repeated small updates remain below the write threshold, leaving the stored state nearly fixed while the network continues to propose change. Error feedback, residual memory, and direction memory carry information from these suppressed updates across time and recover accuracy without retraining. Precision sweeps show that increasing state precision can worsen a fixed recurrent solution, while matched training shows that compatibility with the state interface can be learned. To test whether this behavior extends beyond the GRU, we repeat the post-training intervention in an independently trained LSTM, where coarse write-back reproduces the failure, error feedback restores accuracy, and state-specific interventions reveal greater sensitivity of the cell state than the hidden state. Our results establish recurrent-state write-back as a key determinant of low-precision recurrent dynamics and identify the state-storage interface as a central design consideration for quantized recurrent inference.

  • 3 authors
·
Sep 2 2

One Step is Enough: Multi-Agent Reinforcement Learning based on One-Step Policy Optimization for Order Dispatch on Ride-Sharing Platforms

On-demand ride-sharing platforms face the fundamental challenge of dynamically bundling passengers with diverse origins and destinations and matching them with vehicles in real time, all under significant uncertainty. Recently, MARL has emerged as a promising solution for this problem, leveraging decentralized learning to address the curse of dimensionality caused by the large number of agents in the ride-hailing market and the resulting expansive state and action spaces. However, conventional MARL-based ride-sharing approaches heavily rely on the accurate estimation of Q-values or V-values, which becomes problematic in large-scale, highly uncertain environments. Specifically, most of these approaches adopt an independent paradigm, exacerbating this issue, as each agent treats others as part of the environment, leading to unstable training and substantial estimation bias in value functions. To address these challenges, we propose two novel alternative methods that bypass value function estimation. First, we adapt GRPO to ride-sharing, replacing the PPO baseline with the group average reward to eliminate critic estimation errors and reduce training bias. Second, inspired by GRPO's full utilization of group reward information, we customize the PPO framework for ride-sharing platforms and show that, under a homogeneous fleet, the optimal policy can be trained using only one-step rewards - a method we term One-Step Policy Optimization (OSPO). Experiments on a real-world Manhattan ride-hailing dataset demonstrate that both GRPO and OSPO achieve superior performance across most scenarios, efficiently optimizing pickup times and the number of served orders using simple MLP networks.

  • 2 authors
·
Jul 21, 2025

Beyond Objects: Contextual Synthetic Data Generation for Fine-Grained Classification

Text-to-image (T2I) models are increasingly used for synthetic dataset generation, but generating effective synthetic training data for classification remains challenging. Fine-tuning a T2I model with a few real examples can help improve the quality of synthetic training data; however, it may also cause overfitting and reduce diversity in the generated samples. We propose a fine-tuning strategy BOB (BeyondOBjects) to mitigate these concerns for fine-grained classification. Given a small set of real examples, we first extract class-agnostic attributes such as scene background and object pose. We then explicitly condition on these attributes during fine-tuning of the T2I model and marginalize them out during generation. This design mitigates overfitting, preserves the T2I model's generative prior, reduces estimation errors, and further minimizes unintended inter-class associations. Extensive experiments across multiple T2I models, backbones, and datasets show that our method achieves state-of-the-art performance in low-shot fine-grained classification when augmented with synthetic data. Concretely, BOB outperforms DataDream by 7.4% on the Aircraft dataset (from 50.0% to 57.4% when fine-tuning a CLIP classifier with five real images augmented with 100 synthetic images). In three of the four benchmarks, fine-tuning downstream models with 5 real images augmented with BOB achieves better performance than fine-tuning with 10 real images. Collectively, BOB outperforms prior art in 18 of 24 experimental settings, with 2+% accuracy improvements in 14 of these settings.

  • 5 authors
·
Oct 28, 2025 2

AnchorWeave: World-Consistent Video Generation with Retrieved Local Spatial Memories

Maintaining spatial world consistency over long horizons remains a central challenge for camera-controllable video generation. Existing memory-based approaches often condition generation on globally reconstructed 3D scenes by rendering anchor videos from the reconstructed geometry in the history. However, reconstructing a global 3D scene from multiple views inevitably introduces cross-view misalignment, as pose and depth estimation errors cause the same surfaces to be reconstructed at slightly different 3D locations across views. When fused, these inconsistencies accumulate into noisy geometry that contaminates the conditioning signals and degrades generation quality. We introduce AnchorWeave, a memory-augmented video generation framework that replaces a single misaligned global memory with multiple clean local geometric memories and learns to reconcile their cross-view inconsistencies. To this end, AnchorWeave performs coverage-driven local memory retrieval aligned with the target trajectory and integrates the selected local memories through a multi-anchor weaving controller during generation. Extensive experiments demonstrate that AnchorWeave significantly improves long-term scene consistency while maintaining strong visual quality, with ablation and analysis studies further validating the effectiveness of local geometric conditioning, multi-anchor control, and coverage-driven retrieval.

Convergence of Iterative Water-Filling in Multi-User Non-Cooperative Power Control: A Comprehensive Analysis for Sequential, Simultaneous, and Asynchronous Schemes

Non-cooperative game theory provides a robust framework for analyzing distributed resource allocation in multi-user wireless networks, with Iterative Water-Filling (IWF) emerging as a canonical solution for power control problems. Although classical fixed-point theorems guarantee the existence of a Nash Equilibrium (NE) under mild concavity and compactness conditions, the convergence of practical iterative algorithms to that equilibrium remains a challenging endeavor. This challenge intensifies under varying update schedules, interference regimes, and imperfections such as channel estimation errors or feedback delay. In this paper, we present an in-depth examination of IWF in multi-user systems under three different update schemes: (1) synchronous sequential updates, (2) synchronous simultaneous updates, and (3) totally asynchronous updates. We first formulate the water-filling operator in a multi-carrier environment, then recast the iterative process as a fixed-point problem. Using contraction mapping principles, we demonstrate sufficient conditions under which IWF converges to a unique NE and highlight how spectral radius constraints, diagonal dominance, and careful step-size selection are pivotal for guaranteeing convergence. We further discuss robustness to measurement noise, partial updates, and network scaling to emphasize the practical viability of these schemes. This comprehensive analysis unifies diverse threads in the literature while offering novel insights into asynchronous implementations. Our findings enable network designers to ascertain system parameters that foster both stable convergence and efficient spectrum usage.

  • 1 authors
·
Feb 17, 2025

GraviBERT: Transformer-based inference for gravitational-wave time series

We introduce GraviBERT, a novel deep learning framework for gravitational wave inference, built on a multi-scale feature extractor with a transformer encoder and a suitable regression head. A key novelty of GraviBERT is its staged training: a BERT-style self-supervised pretraining phase to learn transferable representations, followed by supervised fine-tuning on labeled data. GraviBERT demonstrates consistent transfer learning across detector configurations and waveform models. On in-domain data, pretraining reduces the MAE by up to 31% and accelerates convergence by sim 6.6 times, with mean relative precision for point estimates reaching the few-percent level and MAE in effective spin of sim 10^{-3} at SNR = 10. For domain adaptation to new detector noise profiles, the pretrained model converges up to 15times faster on small target datasets and reduces estimation errors by up to sim 47%, demonstrating detector-agnostic learning. Cross-waveform approximant transfer achieves up to 44% MAE reductions and up to 15times training speedups, with R^2 scores consistently exceeding 0.9 for mass parameters at SNR = 10 compared to 0.74 - 0.87 when training from scratch. GraviBERT works directly with noisy waveforms, and in its current form quantifies predictive uncertainty through MC dropouts. After pretraining, the regression head could be adapted to multiple downstream inference tasks in gravitational-wave astronomy.

  • 2 authors
·
Feb 22

TSGS: Improving Gaussian Splatting for Transparent Surface Reconstruction via Normal and De-lighting Priors

Reconstructing transparent surfaces is essential for tasks such as robotic manipulation in labs, yet it poses a significant challenge for 3D reconstruction techniques like 3D Gaussian Splatting (3DGS). These methods often encounter a transparency-depth dilemma, where the pursuit of photorealistic rendering through standard α-blending undermines geometric precision, resulting in considerable depth estimation errors for transparent materials. To address this issue, we introduce Transparent Surface Gaussian Splatting (TSGS), a new framework that separates geometry learning from appearance refinement. In the geometry learning stage, TSGS focuses on geometry by using specular-suppressed inputs to accurately represent surfaces. In the second stage, TSGS improves visual fidelity through anisotropic specular modeling, crucially maintaining the established opacity to ensure geometric accuracy. To enhance depth inference, TSGS employs a first-surface depth extraction method. This technique uses a sliding window over α-blending weights to pinpoint the most likely surface location and calculates a robust weighted average depth. To evaluate the transparent surface reconstruction task under realistic conditions, we collect a TransLab dataset that includes complex transparent laboratory glassware. Extensive experiments on TransLab show that TSGS achieves accurate geometric reconstruction and realistic rendering of transparent objects simultaneously within the efficient 3DGS framework. Specifically, TSGS significantly surpasses current leading methods, achieving a 37.3% reduction in chamfer distance and an 8.0% improvement in F1 score compared to the top baseline. The code and dataset are available at https://longxiang-ai.github.io/TSGS/.

  • 5 authors
·
Aug 2, 2025

General Decision Models: Benchmarking and Insights Beyond Jev

General decision models, such as Jev, have recently emerged as efficient alternatives to LLMs for structured judgment and selection. But what kinds of decisions can these models reliably make, and how does their behavior change when individual decisions are composed into larger systems? To study this, we introduce JEVal, a bilingual benchmark comprising 11,257 instances from 36 datasets across 10 application domains, and evaluate 25 model configurations spanning general decision models and generative LLMs. Our results show that (1) general decision models are most competitive when decisions can be resolved from available evidence, but weaken when they require specialist knowledge or faithful uncertainty estimation: they can often identify the most likely outcome while substantially overstating its probability. (2) In more dynamic and realistic systems involving long-horizon, multi-step interactions, the advantages of fast local decision making are offset by reliability failures at the system level. on τ-bench, faster local decisions reduce median episode time but lower task success as decision errors accumulate over long trajectories. (3) In large-scale social simulation, decision models approach strong generative LLMs on individual response prediction at substantially lower inference cost, yet remain weaker in user profiling and exhibit larger aggregate estimation errors and systematic bias. Finally, we propose InnerJev-4B and InnerJev-27B, which internalize an open-weight LLM's own reasoning into a single-pass first-token decision through Reasoning-to-Readout Self-Distillation, with InnerJev-27B performing on par with Jev on JEVal while answering a typical query in about 0.1 s.

  • 9 authors
·
Oct 1

Tactile-JEPA: Topology-Aware Self-Supervised Representation Learning for Distributed Tactile Sensors

Tactile sensing is an essential modality for robots performing contact-rich, dexterous manipulation, particularly under visual occlusion. While pre-trained image encoders are standard in robot learning pipelines, tactile encoders are still commonly trained from scratch from raw, noisy signals, which might limit their expressivity. Existing self-supervised learning (SSL) approaches focus predominantly on vision-based tactile sensors, leaving distributed electronic skins largely unaddressed. These sensors, however, have a distinctive property: their sensing elements are sparse and irregularly arranged over the surface they cover, which makes direct reuse of visual SSL methods suboptimal. We present Tactile-JEPA, an efficient self-supervised pre-training method that uses the spatial arrangement of tactile sensors to learn topology-aware representations. Specifically, it is trained to predict the embeddings of masked sensing elements from the unmasked remainder, using the sensor connectivity graph to guide spatial masking. Our analysis shows that effective tactile representations require capturing both local contact details and the global state of the tactile surface, which we achieve through dual-scale masking. Across three diverse datasets spanning magnetic and piezoresistive sensors, different robot embodiments, and single- and paired-sensor configurations, Tactile-JEPA reduces force estimation error by 6.3% and in-hand orientation error by 20.8% over the prior state-of-the-art, with consistent gains in other downstream applications, including policy learning. Overall, our results demonstrate that the benefit of tactile sensing depends critically on the quality of encoder pre-training, a problem which Tactile-JEPA addresses directly. Code is available at https://github.com/E-Kovtun/tactile.

  • 4 authors
·
Sep 20 2

Margin Adaptive DPO: Leveraging Reward Model for Granular Control in Preference Optimization

Direct Preference Optimization (DPO) has emerged as a simple and effective method for aligning large language models. However, its reliance on a fixed temperature parameter leads to suboptimal training on diverse preference data, causing overfitting on easy examples and under-learning from informative ones. Recent methods have emerged to counter this. While IPO addresses general overfitting, its uniform regularization can be overly conservative. The more targeted approach of beta-DPO suffers from its own limitations: its batch-level adaptation applies a single, compromised temperature to mixed-margin pairs, its linear update rule can produce unstable negative beta values, and its filtering mechanism discards potentially useful training signals. In this work, we introduce Margin-Adaptive Direct Preference Optimization (MADPO), a method that provides a stable, data-preserving, and instance-level solution. MADPO employs a practical two-step approach: it first trains a reward model to estimate preference margins and then uses these margins to apply a continuous, adaptive weight to the DPO loss for each individual training sample. This re-weighting scheme creates an effective target margin that is amplified for hard pairs and dampened for easy pairs, allowing for granular control over the learning signal. We provide a comprehensive theoretical analysis, proving that MADPO has a well-behaved optimization landscape and is robust to reward model estimation errors. We validate our theory with experiments on a sentiment generation task, where MADPO consistently and significantly outperforms strong baselines across datasets of varying quality. It achieves performance gains of up to +33.3\% on High Quality data and +10.5\% on Low Quality data over the next-best method. Our results establish MADPO as a more robust and principled approach to preference alignment.

  • 1 authors
·
Oct 6, 2025 2

BigCharts-R1: Enhanced Chart Reasoning with Visual Reinforcement Finetuning

Charts are essential to data analysis, transforming raw data into clear visual representations that support human decision-making. Although current vision-language models (VLMs) have made significant progress, they continue to struggle with chart comprehension due to training on datasets that lack diversity and real-world authenticity, or on automatically extracted underlying data tables of charts, which can contain numerous estimation errors. Furthermore, existing models only rely on supervised fine-tuning using these low-quality datasets, severely limiting their effectiveness. To address these issues, we first propose BigCharts, a dataset creation pipeline that generates visually diverse chart images by conditioning the rendering process on real-world charts sourced from multiple online platforms. Unlike purely synthetic datasets, BigCharts incorporates real-world data, ensuring authenticity and visual diversity, while still retaining accurate underlying data due to our proposed replotting process. Additionally, we introduce a comprehensive training framework that integrates supervised fine-tuning with Group Relative Policy Optimization (GRPO)-based reinforcement learning. By introducing novel reward signals specifically designed for chart reasoning, our approach enhances model robustness and generalization across diverse chart styles and domains, resulting in a state-of-the-art chart reasoning model, BigCharts-R1. Extensive experiments demonstrate that our models surpass existing methods on multiple chart question-answering benchmarks compared to even larger open-source and closed-source models.

  • 16 authors
·
Aug 13, 2025

ZS-SRT: An Efficient Zero-Shot Super-Resolution Training Method for Neural Radiance Fields

Neural Radiance Fields (NeRF) have achieved great success in the task of synthesizing novel views that preserve the same resolution as the training views. However, it is challenging for NeRF to synthesize high-quality high-resolution novel views with low-resolution training data. To solve this problem, we propose a zero-shot super-resolution training framework for NeRF. This framework aims to guide the NeRF model to synthesize high-resolution novel views via single-scene internal learning rather than requiring any external high-resolution training data. Our approach consists of two stages. First, we learn a scene-specific degradation mapping by performing internal learning on a pretrained low-resolution coarse NeRF. Second, we optimize a super-resolution fine NeRF by conducting inverse rendering with our mapping function so as to backpropagate the gradients from low-resolution 2D space into the super-resolution 3D sampling space. Then, we further introduce a temporal ensemble strategy in the inference phase to compensate for the scene estimation errors. Our method is featured on two points: (1) it does not consume high-resolution views or additional scene data to train super-resolution NeRF; (2) it can speed up the training process by adopting a coarse-to-fine strategy. By conducting extensive experiments on public datasets, we have qualitatively and quantitatively demonstrated the effectiveness of our method.

  • 9 authors
·
Dec 19, 2023

Deep Learning Segmentation of Ascites on Abdominal CT Scans for Automatic Volume Quantification

Purpose: To evaluate the performance of an automated deep learning method in detecting ascites and subsequently quantifying its volume in patients with liver cirrhosis and ovarian cancer. Materials and Methods: This retrospective study included contrast-enhanced and non-contrast abdominal-pelvic CT scans of patients with cirrhotic ascites and patients with ovarian cancer from two institutions, National Institutes of Health (NIH) and University of Wisconsin (UofW). The model, trained on The Cancer Genome Atlas Ovarian Cancer dataset (mean age, 60 years +/- 11 [s.d.]; 143 female), was tested on two internal (NIH-LC and NIH-OV) and one external dataset (UofW-LC). Its performance was measured by the Dice coefficient, standard deviations, and 95% confidence intervals, focusing on ascites volume in the peritoneal cavity. Results: On NIH-LC (25 patients; mean age, 59 years +/- 14 [s.d.]; 14 male) and NIH-OV (166 patients; mean age, 65 years +/- 9 [s.d.]; all female), the model achieved Dice scores of 0.855 +/- 0.061 (CI: 0.831-0.878) and 0.826 +/- 0.153 (CI: 0.764-0.887), with median volume estimation errors of 19.6% (IQR: 13.2-29.0) and 5.3% (IQR: 2.4-9.7) respectively. On UofW-LC (124 patients; mean age, 46 years +/- 12 [s.d.]; 73 female), the model had a Dice score of 0.830 +/- 0.107 (CI: 0.798-0.863) and median volume estimation error of 9.7% (IQR: 4.5-15.1). The model showed strong agreement with expert assessments, with r^2 values of 0.79, 0.98, and 0.97 across the test sets. Conclusion: The proposed deep learning method performed well in segmenting and quantifying the volume of ascites in concordance with expert radiologist assessments.

  • 7 authors
·
Jun 22, 2024

Evaluating LLM Uncertainty in Long-Form Generation Using Deterministic Ground Truth

As LLMs generate increasingly long outputs, effective uncertainty estimation must identify errors at fine-grained levels rather than discard entire responses. While such methods exist, evaluating uncertainty at any resolution (token to an entire generation) is challenging and highly sensitive to label imperfections, making zero-noise benchmarks essential; yet, long-form generation benchmarks tend to rely on fallible labels rather than deterministic ground truth. We introduce Single-answer Atomic Long-form Target (SALT), a benchmark of six procedurally generated tasks with single deterministic long textual ground truths, enabling unit-level evaluation of correctness, calibration, and ranking without external judges. Equipped with SALT, our analysis of 50+ LLMs reveals key insights: We identify which confidence functions dominate each uncertainty aspect and show that confidence ranking largely breaks at atomic resolution, even when clearer separability emerges at coarser line-level units. SALT further enables controlled atom-level interventions throughout generation, revealing two separable drivers of future errors: propagation from corrupted prefixes, dominated by global context correctness, and bounded degradation from increasing answer-context length. Finally, we demonstrate that reasoning, via Chain-of-Thought prompting or internalized through training, introduces a trade-off, improving accuracy while degrading confidence ranking. These findings directly impact risk-critical applications requiring reliable error identification and mitigation.

  • 3 authors
·
Jul 3

Towards Efficient and General-Purpose Few-Shot Misclassification Detection for Vision-Language Models

Reliable prediction by classifiers is crucial for their deployment in high security and dynamically changing situations. However, modern neural networks often exhibit overconfidence for misclassified predictions, highlighting the need for confidence estimation to detect errors. Despite the achievements obtained by existing methods on small-scale datasets, they all require training from scratch and there are no efficient and effective misclassification detection (MisD) methods, hindering practical application towards large-scale and ever-changing datasets. In this paper, we pave the way to exploit vision language model (VLM) leveraging text information to establish an efficient and general-purpose misclassification detection framework. By harnessing the power of VLM, we construct FSMisD, a Few-Shot prompt learning framework for MisD to refrain from training from scratch and therefore improve tuning efficiency. To enhance misclassification detection ability, we use adaptive pseudo sample generation and a novel negative loss to mitigate the issue of overconfidence by pushing category prompts away from pseudo features. We conduct comprehensive experiments with prompt learning methods and validate the generalization ability across various datasets with domain shift. Significant and consistent improvement demonstrates the effectiveness, efficiency and generalizability of our approach.

  • 4 authors
·
Mar 26, 2025

Short-term Volatility Estimation for High Frequency Trades using Gaussian processes (GPs)

The fundamental theorem behind financial markets is that stock prices are intrinsically complex and stochastic. One of the complexities is the volatility associated with stock prices. Volatility is a tendency for prices to change unexpectedly [1]. Price volatility is often detrimental to the return economics, and thus, investors should factor it in whenever making investment decisions, choices, and temporal or permanent moves. It is, therefore, crucial to make necessary and regular short and long-term stock price volatility forecasts for the safety and economics of investors returns. These forecasts should be accurate and not misleading. Different models and methods, such as ARCH GARCH models, have been intuitively implemented to make such forecasts. However, such traditional means fail to capture the short-term volatility forecasts effectively. This paper, therefore, investigates and implements a combination of numeric and probabilistic models for short-term volatility and return forecasting for high-frequency trades. The essence is that one-day-ahead volatility forecasts were made with Gaussian Processes (GPs) applied to the outputs of a Numerical market prediction (NMP) model. Firstly, the stock price data from NMP was corrected by a GP. Since it is not easy to set price limits in a market due to its free nature and randomness, a Censored GP was used to model the relationship between the corrected stock prices and returns. Forecasting errors were evaluated using the implied and estimated data.

  • 3 authors
·
Nov 17, 2023

ASDF: Assembly State Detection Utilizing Late Fusion by Integrating 6D Pose Estimation

In medical and industrial domains, providing guidance for assembly processes can be critical to ensure efficiency and safety. Errors in assembly can lead to significant consequences such as extended surgery times and prolonged manufacturing or maintenance times in industry. Assembly scenarios can benefit from in-situ augmented reality visualization, i.e., augmentations in close proximity to the target object, to provide guidance, reduce assembly times, and minimize errors. In order to enable in-situ visualization, 6D pose estimation can be leveraged to identify the correct location for an augmentation. Existing 6D pose estimation techniques primarily focus on individual objects and static captures. However, assembly scenarios have various dynamics, including occlusion during assembly and dynamics in the appearance of assembly objects. Existing work focus either on object detection combined with state detection, or focus purely on the pose estimation. To address the challenges of 6D pose estimation in combination with assembly state detection, our approach ASDF builds upon the strengths of YOLOv8, a real-time capable object detection framework. We extend this framework, refine the object pose, and fuse pose knowledge with network-detected pose information. Utilizing our late fusion in our Pose2State module results in refined 6D pose estimation and assembly state detection. By combining both pose and state information, our Pose2State module predicts the final assembly state with precision. The evaluation of our ASDF dataset shows that our Pose2State module leads to an improved assembly state detection and that the improvement of the assembly state further leads to a more robust 6D pose estimation. Moreover, on the GBOT dataset, we outperform the pure deep learning-based network and even outperform the hybrid and pure tracking-based approaches.

  • 6 authors
·
Mar 24, 2024

Joint Multi-Person Body Detection and Orientation Estimation via One Unified Embedding

Human body orientation estimation (HBOE) is widely applied into various applications, including robotics, surveillance, pedestrian analysis and autonomous driving. Although many approaches have been addressing the HBOE problem from specific under-controlled scenes to challenging in-the-wild environments, they assume human instances are already detected and take a well cropped sub-image as the input. This setting is less efficient and prone to errors in real application, such as crowds of people. In the paper, we propose a single-stage end-to-end trainable framework for tackling the HBOE problem with multi-persons. By integrating the prediction of bounding boxes and direction angles in one embedding, our method can jointly estimate the location and orientation of all bodies in one image directly. Our key idea is to integrate the HBOE task into the multi-scale anchor channel predictions of persons for concurrently benefiting from engaged intermediate features. Therefore, our approach can naturally adapt to difficult instances involving low resolution and occlusion as in object detection. We validated the efficiency and effectiveness of our method in the recently presented benchmark MEBOW with extensive experiments. Besides, we completed ambiguous instances ignored by the MEBOW dataset, and provided corresponding weak body-orientation labels to keep the integrity and consistency of it for supporting studies toward multi-persons. Our work is available at https://github.com/hnuzhy/JointBDOE.

  • 4 authors
·
Oct 27, 2022

One Eye is All You Need: Lightweight Ensembles for Gaze Estimation with Single Encoders

Gaze estimation has grown rapidly in accuracy in recent years. However, these models often fail to take advantage of different computer vision (CV) algorithms and techniques (such as small ResNet and Inception networks and ensemble models) that have been shown to improve results for other CV problems. Additionally, most current gaze estimation models require the use of either both eyes or an entire face, whereas real-world data may not always have both eyes in high resolution. Thus, we propose a gaze estimation model that implements the ResNet and Inception model architectures and makes predictions using only one eye image. Furthermore, we propose an ensemble calibration network that uses the predictions from several individual architectures for subject-specific predictions. With the use of lightweight architectures, we achieve high performance on the GazeCapture dataset with very low model parameter counts. When using two eyes as input, we achieve a prediction error of 1.591 cm on the test set without calibration and 1.439 cm with an ensemble calibration model. With just one eye as input, we still achieve an average prediction error of 2.312 cm on the test set without calibration and 1.951 cm with an ensemble calibration model. We also notice significantly lower errors on the right eye images in the test set, which could be important in the design of future gaze estimation-based tools.

  • 3 authors
·
Nov 21, 2022

Sparse-view Pose Estimation and Reconstruction via Analysis by Generative Synthesis

Inferring the 3D structure underlying a set of multi-view images typically requires solving two co-dependent tasks -- accurate 3D reconstruction requires precise camera poses, and predicting camera poses relies on (implicitly or explicitly) modeling the underlying 3D. The classical framework of analysis by synthesis casts this inference as a joint optimization seeking to explain the observed pixels, and recent instantiations learn expressive 3D representations (e.g., Neural Fields) with gradient-descent-based pose refinement of initial pose estimates. However, given a sparse set of observed views, the observations may not provide sufficient direct evidence to obtain complete and accurate 3D. Moreover, large errors in pose estimation may not be easily corrected and can further degrade the inferred 3D. To allow robust 3D reconstruction and pose estimation in this challenging setup, we propose SparseAGS, a method that adapts this analysis-by-synthesis approach by: a) including novel-view-synthesis-based generative priors in conjunction with photometric objectives to improve the quality of the inferred 3D, and b) explicitly reasoning about outliers and using a discrete search with a continuous optimization-based strategy to correct them. We validate our framework across real-world and synthetic datasets in combination with several off-the-shelf pose estimation systems as initialization. We find that it significantly improves the base systems' pose accuracy while yielding high-quality 3D reconstructions that outperform the results from current multi-view reconstruction baselines.

  • 2 authors
·
Dec 4, 2024

Gaze Target Estimation Anywhere with Concepts

Estimating human gaze targets from images in-the-wild is an important and formidable task. Existing approaches primarily employ brittle, multi-stage pipelines that require explicit inputs, like head bounding boxes and human pose, in order to identify the subject of gaze analysis. As a result, detection errors can cascade and lead to failure. Moreover, these prior works lack the flexibility of specifying the gaze analysis task via natural language prompting, an approach which has been shown to have significant benefits in convenience and scalability for other image analysis tasks. To overcome these limitations, we introduce the Promptable Gaze Target Estimation (PGE) task, a new end-to-end, concept-driven paradigm for gaze analysis. PGE conditions gaze prediction on flexible user text or visual prompts (e.g., "the boy in the red shirt" or "person in point [0.52, 0.48]") to identify a specific subject for gaze analysis. This approach integrates subject localization with gaze estimation, and eliminates the rigid dependency on intermediate analysis stages. We develop a scalable data engine to generate Gaze-Co (Gaze Estimation with Concepts), a dataset and benchmark of 120K high-quality, prompt-annotated image pairs. We also propose GazeAnywhere, the first model designed for PGE. GazeAnywhere uses a transformer-based detector to fuse features from frozen encoders and simultaneously solves subject localization, in/out-of-frame presence, and gaze target heatmap estimation. GazeAnywhere achieves state-of-the-art performance on multiple PGE benchmarks, setting a strong baseline for this new problem even on a difficult out-of-domain, real-world clinical dataset. GazeAnywhere is open-sourced in github.com/IrohXu/GazeAnywhere.

google Google
·
Aug 10 2

Disentangled Diffusion-Based 3D Human Pose Estimation with Hierarchical Spatial and Temporal Denoiser

Recently, diffusion-based methods for monocular 3D human pose estimation have achieved state-of-the-art (SOTA) performance by directly regressing the 3D joint coordinates from the 2D pose sequence. Although some methods decompose the task into bone length and bone direction prediction based on the human anatomical skeleton to explicitly incorporate more human body prior constraints, the performance of these methods is significantly lower than that of the SOTA diffusion-based methods. This can be attributed to the tree structure of the human skeleton. Direct application of the disentangled method could amplify the accumulation of hierarchical errors, propagating through each hierarchy. Meanwhile, the hierarchical information has not been fully explored by the previous methods. To address these problems, a Disentangled Diffusion-based 3D Human Pose Estimation method with Hierarchical Spatial and Temporal Denoiser is proposed, termed DDHPose. In our approach: (1) We disentangle the 3D pose and diffuse the bone length and bone direction during the forward process of the diffusion model to effectively model the human pose prior. A disentanglement loss is proposed to supervise diffusion model learning. (2) For the reverse process, we propose Hierarchical Spatial and Temporal Denoiser (HSTDenoiser) to improve the hierarchical modeling of each joint. Our HSTDenoiser comprises two components: the Hierarchical-Related Spatial Transformer (HRST) and the Hierarchical-Related Temporal Transformer (HRTT). HRST exploits joint spatial information and the influence of the parent joint on each joint for spatial modeling, while HRTT utilizes information from both the joint and its hierarchical adjacent joints to explore the hierarchical temporal correlations among joints. Code and models are available at https://github.com/Andyen512/DDHPose

  • 5 authors
·
Mar 7, 2024

TransNormal-2: Geometry-Grounded Rectified Flow with Edge-Aware Decoding for Precise Normal Estimation

Diffusion-based models enable monocular geometry estimation, yet their pixel-space precision is limited by a shared, under-studied error source: VAE reconstruction degradation. The 8x spatial compression in the VAE encoder-decoder degrades surface normals at object boundaries; even encoding and decoding ground-truth normals introduces 1.3--8.5° of mean angular error (MAE), with edge MAE reaching 2.8x the global MAE. We present TransNormal-2, a FLUX.2-based rectified-flow framework with single-step deterministic inference that addresses this degradation on both sides of the VAE decoder: in how latent predictions are supervised during training, and in how decoded normals are corrected at inference. First, geometry-aware pixel-space losses, including inverse rendering self-consistency, von~Mises-Fisher angular loss, and wavelet edge-aware regularization, complement latent MSE by enforcing spherical normal geometry and diffuse image-formation cues after VAE decoding. Second, a lightweight Geometric Refinement Module (GRM) applies an RGB-guided residual correction to reduce boundary-localized decoding errors without freely rewriting the coarse prediction. On general-scene benchmarks, TransNormal-2 matches or exceeds MoGe-2 on all eight reported metrics while using only 1.4% as many task-specific normal annotations. The gains are clearest for transparent objects, reducing MAE by 4.2° on ClearGrasp and 3.1° on ClearPose over the strongest prior baselines. Code will be released at https://longxiang-ai.github.io/TransNormal-2.

  • 3 authors
·
Sep 5 2

Deformer: Dynamic Fusion Transformer for Robust Hand Pose Estimation

Accurately estimating 3D hand pose is crucial for understanding how humans interact with the world. Despite remarkable progress, existing methods often struggle to generate plausible hand poses when the hand is heavily occluded or blurred. In videos, the movements of the hand allow us to observe various parts of the hand that may be occluded or blurred in a single frame. To adaptively leverage the visual clue before and after the occlusion or blurring for robust hand pose estimation, we propose the Deformer: a framework that implicitly reasons about the relationship between hand parts within the same image (spatial dimension) and different timesteps (temporal dimension). We show that a naive application of the transformer self-attention mechanism is not sufficient because motion blur or occlusions in certain frames can lead to heavily distorted hand features and generate imprecise keys and queries. To address this challenge, we incorporate a Dynamic Fusion Module into Deformer, which predicts the deformation of the hand and warps the hand mesh predictions from nearby frames to explicitly support the current frame estimation. Furthermore, we have observed that errors are unevenly distributed across different hand parts, with vertices around fingertips having disproportionately higher errors than those around the palm. We mitigate this issue by introducing a new loss function called maxMSE that automatically adjusts the weight of every vertex to focus the model on critical hand parts. Extensive experiments show that our method significantly outperforms state-of-the-art methods by 10%, and is more robust to occlusions (over 14%).

  • 5 authors
·
Mar 8, 2023

Thermal Image Refinement with Depth Estimation using Recurrent Networks for Monocular ORB-SLAM3

Autonomous navigation in GPS-denied and visually degraded environments remains challenging for unmanned aerial vehicles (UAVs). To this end, we investigate the use of a monocular thermal camera as a standalone sensor on a UAV platform for real-time depth estimation and simultaneous localization and mapping (SLAM). To extract depth information from thermal images, we propose a novel pipeline employing a lightweight supervised network with recurrent blocks (RBs) integrated to capture temporal dependencies, enabling more robust predictions. The network combines lightweight convolutional backbones with a thermal refinement network (T-RefNet) to refine raw thermal inputs and enhance feature visibility. The refined thermal images and predicted depth maps are integrated into ORB-SLAM3, enabling thermal-only localization. Unlike previous methods, the network is trained on a custom non-radiometric dataset, obviating the need for high-cost radiometric thermal cameras. Experimental results on datasets and UAV flights demonstrate competitive depth accuracy and robust SLAM performance under low-light conditions. On the radiometric VIVID++ (indoor-dark) dataset, our method achieves an absolute relative error of approximately 0.06, compared to baselines exceeding 0.11. In our non-radiometric indoor set, baseline errors remain above 0.24, whereas our approach remains below 0.10. Thermal-only ORB-SLAM3 maintains a mean trajectory error under 0.4 m.

  • 5 authors
·
Mar 16

RoboKeyGen: Robot Pose and Joint Angles Estimation via Diffusion-based 3D Keypoint Generation

Estimating robot pose and joint angles is significant in advanced robotics, enabling applications like robot collaboration and online hand-eye calibration.However, the introduction of unknown joint angles makes prediction more complex than simple robot pose estimation, due to its higher dimensionality.Previous methods either regress 3D keypoints directly or utilise a render&compare strategy. These approaches often falter in terms of performance or efficiency and grapple with the cross-camera gap problem.This paper presents a novel framework that bifurcates the high-dimensional prediction task into two manageable subtasks: 2D keypoints detection and lifting 2D keypoints to 3D. This separation promises enhanced performance without sacrificing the efficiency innate to keypoint-based techniques.A vital component of our method is the lifting of 2D keypoints to 3D keypoints. Common deterministic regression methods may falter when faced with uncertainties from 2D detection errors or self-occlusions.Leveraging the robust modeling potential of diffusion models, we reframe this issue as a conditional 3D keypoints generation task. To bolster cross-camera adaptability, we introduce theNormalised Camera Coordinate Space (NCCS), ensuring alignment of estimated 2D keypoints across varying camera intrinsics.Experimental results demonstrate that the proposed method outperforms the state-of-the-art render\&compare method and achieves higher inference speed.Furthermore, the tests accentuate our method's robust cross-camera generalisation capabilities.We intend to release both the dataset and code in https://nimolty.github.io/Robokeygen/

  • 7 authors
·
Mar 26, 2024

Object Pose Estimation with Statistical Guarantees: Conformal Keypoint Detection and Geometric Uncertainty Propagation

The two-stage object pose estimation paradigm first detects semantic keypoints on the image and then estimates the 6D pose by minimizing reprojection errors. Despite performing well on standard benchmarks, existing techniques offer no provable guarantees on the quality and uncertainty of the estimation. In this paper, we inject two fundamental changes, namely conformal keypoint detection and geometric uncertainty propagation, into the two-stage paradigm and propose the first pose estimator that endows an estimation with provable and computable worst-case error bounds. On one hand, conformal keypoint detection applies the statistical machinery of inductive conformal prediction to convert heuristic keypoint detections into circular or elliptical prediction sets that cover the groundtruth keypoints with a user-specified marginal probability (e.g., 90%). Geometric uncertainty propagation, on the other, propagates the geometric constraints on the keypoints to the 6D object pose, leading to a Pose UnceRtainty SEt (PURSE) that guarantees coverage of the groundtruth pose with the same probability. The PURSE, however, is a nonconvex set that does not directly lead to estimated poses and uncertainties. Therefore, we develop RANdom SAmple averaGing (RANSAG) to compute an average pose and apply semidefinite relaxation to upper bound the worst-case errors between the average pose and the groundtruth. On the LineMOD Occlusion dataset we demonstrate: (i) the PURSE covers the groundtruth with valid probabilities; (ii) the worst-case error bounds provide correct uncertainty quantification; and (iii) the average pose achieves better or similar accuracy as representative methods based on sparse keypoints.

  • 2 authors
·
Mar 21, 2023

OpenCapBench: A Benchmark to Bridge Pose Estimation and Biomechanics

Pose estimation has promised to impact healthcare by enabling more practical methods to quantify nuances of human movement and biomechanics. However, despite the inherent connection between pose estimation and biomechanics, these disciplines have largely remained disparate. For example, most current pose estimation benchmarks use metrics such as Mean Per Joint Position Error, Percentage of Correct Keypoints, or mean Average Precision to assess performance, without quantifying kinematic and physiological correctness - key aspects for biomechanics. To alleviate this challenge, we develop OpenCapBench to offer an easy-to-use unified benchmark to assess common tasks in human pose estimation, evaluated under physiological constraints. OpenCapBench computes consistent kinematic metrics through joints angles provided by an open-source musculoskeletal modeling software (OpenSim). Through OpenCapBench, we demonstrate that current pose estimation models use keypoints that are too sparse for accurate biomechanics analysis. To mitigate this challenge, we introduce SynthPose, a new approach that enables finetuning of pre-trained 2D human pose models to predict an arbitrarily denser set of keypoints for accurate kinematic analysis through the use of synthetic data. Incorporating such finetuning on synthetic data of prior models leads to twofold reduced joint angle errors. Moreover, OpenCapBench allows users to benchmark their own developed models on our clinically relevant cohort. Overall, OpenCapBench bridges the computer vision and biomechanics communities, aiming to drive simultaneous advances in both areas.

  • 6 authors
·
Jun 14, 2024

Dual networks based 3D Multi-Person Pose Estimation from Monocular Video

Monocular 3D human pose estimation has made progress in recent years. Most of the methods focus on single persons, which estimate the poses in the person-centric coordinates, i.e., the coordinates based on the center of the target person. Hence, these methods are inapplicable for multi-person 3D pose estimation, where the absolute coordinates (e.g., the camera coordinates) are required. Moreover, multi-person pose estimation is more challenging than single pose estimation, due to inter-person occlusion and close human interactions. Existing top-down multi-person methods rely on human detection (i.e., top-down approach), and thus suffer from the detection errors and cannot produce reliable pose estimation in multi-person scenes. Meanwhile, existing bottom-up methods that do not use human detection are not affected by detection errors, but since they process all persons in a scene at once, they are prone to errors, particularly for persons in small scales. To address all these challenges, we propose the integration of top-down and bottom-up approaches to exploit their strengths. Our top-down network estimates human joints from all persons instead of one in an image patch, making it robust to possible erroneous bounding boxes. Our bottom-up network incorporates human-detection based normalized heatmaps, allowing the network to be more robust in handling scale variations. Finally, the estimated 3D poses from the top-down and bottom-up networks are fed into our integration network for final 3D poses. To address the common gaps between training and testing data, we do optimization during the test time, by refining the estimated 3D human poses using high-order temporal constraint, re-projection loss, and bone length regularizations. Our evaluations demonstrate the effectiveness of the proposed method. Code and models are available: https://github.com/3dpose/3D-Multi-Person-Pose.

  • 3 authors
·
May 2, 2022

KDPE: A Kernel Density Estimation Strategy for Diffusion Policy Trajectory Selection

Learning robot policies that capture multimodality in the training data has been a long-standing open challenge for behavior cloning. Recent approaches tackle the problem by modeling the conditional action distribution with generative models. One of these approaches is Diffusion Policy, which relies on a diffusion model to denoise random points into robot action trajectories. While achieving state-of-the-art performance, it has two main drawbacks that may lead the robot out of the data distribution during policy execution. First, the stochasticity of the denoising process can highly impact on the quality of generated trajectory of actions. Second, being a supervised learning approach, it can learn data outliers from the dataset used for training. Recent work focuses on mitigating these limitations by combining Diffusion Policy either with large-scale training or with classical behavior cloning algorithms. Instead, we propose KDPE, a Kernel Density Estimation-based strategy that filters out potentially harmful trajectories output of Diffusion Policy while keeping a low test-time computational overhead. For Kernel Density Estimation, we propose a manifold-aware kernel to model a probability density function for actions composed of end-effector Cartesian position, orientation, and gripper state. KDPE overall achieves better performance than Diffusion Policy on simulated single-arm tasks and real robot experiments. Additional material and code are available on our project page at https://hsp-iit.github.io/KDPE/.

  • 4 authors
·
Aug 14, 2025

Learning a distance measure from the information-estimation geometry of data

We introduce the Information-Estimation Metric (IEM), a novel form of distance function derived from an underlying continuous probability density over a domain of signals. The IEM is rooted in a fundamental relationship between information theory and estimation theory, which links the log-probability of a signal with the errors of an optimal denoiser, applied to noisy observations of the signal. In particular, the IEM between a pair of signals is obtained by comparing their denoising error vectors over a range of noise amplitudes. Geometrically, this amounts to comparing the score vector fields of the blurred density around the signals over a range of blur levels. We prove that the IEM is a valid global distance metric and derive a closed-form expression for its local second-order approximation, which yields a Riemannian metric. For Gaussian-distributed signals, the IEM coincides with the Mahalanobis distance. But for more complex distributions, it adapts, both locally and globally, to the geometry of the distribution. In practice, the IEM can be computed using a learned denoiser (analogous to generative diffusion models) and solving a one-dimensional integral. To demonstrate the value of our framework, we learn an IEM on the ImageNet database. Experiments show that this IEM is competitive with or outperforms state-of-the-art supervised image quality metrics in predicting human perceptual judgments.

  • 5 authors
·
Oct 2, 2025

Micro-Diffusion Compression -- Binary Tree Tweedie Denoising for Online Probability Estimation

We present Midicoth, a lossless compression system that introduces a micro-diffusion denoising layer for improving probability estimates produced by adaptive statistical models. In compressors such as Prediction by Partial Matching (PPM), probability estimates are smoothed by a prior to handle sparse observations. When contexts have been seen only a few times, this prior dominates the prediction and produces distributions that are significantly flatter than the true source distribution, leading to compression inefficiency. Midicoth addresses this limitation by treating prior smoothing as a shrinkage process and applying a reverse denoising step that corrects predicted probabilities using empirical calibration statistics. To make this correction data-efficient, the method decomposes each byte prediction into a hierarchy of binary decisions along a bitwise tree. This converts a single 256-way calibration problem into a sequence of binary calibration tasks, enabling reliable estimation of correction terms from relatively small numbers of observations. The denoising process is applied in multiple successive steps, allowing each stage to refine residual prediction errors left by the previous one. The micro-diffusion layer operates as a lightweight post-blend calibration stage applied after all model predictions have been combined, allowing it to correct systematic biases in the final probability distribution. Midicoth combines five fully online components: an adaptive PPM model, a long-range match model, a trie-based word model, a high-order context model, and the micro-diffusion denoiser applied as the final stage.

  • 1 authors
·
Mar 9 2

WALDO: Where Unseen Model-based 6D Pose Estimation Meets Occlusion

Accurate 6D object pose estimation is vital for robotics, augmented reality, and scene understanding. For seen objects, high accuracy is often attainable via per-object fine-tuning but generalizing to unseen objects remains a challenge. To address this problem, past arts assume access to CAD models at test time and typically follow a multi-stage pipeline to estimate poses: detect and segment the object, propose an initial pose, and then refine it. Under occlusion, however, the early-stage of such pipelines are prone to errors, which can propagate through the sequential processing, and consequently degrade the performance. To remedy this shortcoming, we propose four novel extensions to model-based 6D pose estimation methods: (i) a dynamic non-uniform dense sampling strategy that focuses computation on visible regions, reducing occlusion-induced errors; (ii) a multi-hypothesis inference mechanism that retains several confidence-ranked pose candidates, mitigating brittle single-path failures; (iii) iterative refinement to progressively improve pose accuracy; and (iv) series of occlusion-focused training augmentations that strengthen robustness and generalization. Furthermore, we propose a new weighted by visibility metric for evaluation under occlusion to minimize the bias in the existing protocols. Via extensive empirical evaluations, we show that our proposed approach achieves more than 5% improvement in accuracy on ICBIN and more than 2% on BOP dataset benchmarks, while achieving approximately 3 times faster inference.

  • 4 authors
·
Nov 18, 2025

FuXiWeather2: Learning accurate atmospheric state estimation for operational global weather forecasting

Numerical weather prediction has long been constrained by the computational bottlenecks inherent in data assimilation and numerical modeling. While machine learning has accelerated forecasting, existing models largely serve as "emulators of reanalysis products," thereby retaining their systematic biases and operational latencies. Here, we present FuXiWeather2, a unified end-to-end neural framework for assimilation and forecasting. We align training objectives directly with a combination of real-world observations and reanalysis data, enabling the framework to effectively rectify inherent errors within reanalysis products. To address the distribution shift between NWP-derived background inputs during training and self-generated backgrounds during deployment, we introduce a recursive unrolling training method to enhance the precision and stability of analysis generation. Furthermore, our model is trained on a hybrid dataset of raw and simulated observations to mitigate the impact of observational distribution inconsistency. FuXiWeather2 generates high-resolution (0.25^{circ}) global analysis fields and 10-day forecasts within minutes. The analysis fields surpass the NCEP-GFS across most variables and demonstrate superior accuracy over both ERA5 and the ECMWF-HRES system in lower-tropospheric and surface variables. These high-quality analysis fields drive deterministic forecasts that exceed the skill of the HRES system in 91\% of evaluated metrics. Additionally, its outstanding performance in typhoon track prediction underscores its practical value for rapid response to extreme weather events. The FuXiWeather2 analysis dataset is available at https://doi.org/10.5281/zenodo.18872728.

  • 8 authors
·
Mar 15

QuartDepth: Post-Training Quantization for Real-Time Depth Estimation on the Edge

Monocular Depth Estimation (MDE) has emerged as a pivotal task in computer vision, supporting numerous real-world applications. However, deploying accurate depth estimation models on resource-limited edge devices, especially Application-Specific Integrated Circuits (ASICs), is challenging due to the high computational and memory demands. Recent advancements in foundational depth estimation deliver impressive results but further amplify the difficulty of deployment on ASICs. To address this, we propose QuartDepth which adopts post-training quantization to quantize MDE models with hardware accelerations for ASICs. Our approach involves quantizing both weights and activations to 4-bit precision, reducing the model size and computation cost. To mitigate the performance degradation, we introduce activation polishing and compensation algorithm applied before and after activation quantization, as well as a weight reconstruction method for minimizing errors in weight quantization. Furthermore, we design a flexible and programmable hardware accelerator by supporting kernel fusion and customized instruction programmability, enhancing throughput and efficiency. Experimental results demonstrate that our framework achieves competitive accuracy while enabling fast inference and higher energy efficiency on ASICs, bridging the gap between high-performance depth estimation and practical edge-device applicability. Code: https://github.com/shawnricecake/quart-depth

  • 12 authors
·
Mar 20, 2025 2

Dual-stream Spatio-Temporal GCN-Transformer Network for 3D Human Pose Estimation

3D human pose estimation is a classic and important research direction in the field of computer vision. In recent years, Transformer-based methods have made significant progress in lifting 2D to 3D human pose estimation. However, these methods primarily focus on modeling global temporal and spatial relationships, neglecting local skeletal relationships and the information interaction between different channels. Therefore, we have proposed a novel method,the Dual-stream Spatio-temporal GCN-Transformer Network (MixTGFormer). This method models the spatial and temporal relationships of human skeletons simultaneously through two parallel channels, achieving effective fusion of global and local features. The core of MixTGFormer is composed of stacked Mixformers. Specifically, the Mixformer includes the Mixformer Block and the Squeeze-and-Excitation Layer ( SE Layer). It first extracts and fuses various information of human skeletons through two parallel Mixformer Blocks with different modes. Then, it further supplements the fused information through the SE Layer. The Mixformer Block integrates Graph Convolutional Networks (GCN) into the Transformer, enhancing both local and global information utilization. Additionally, we further implement its temporal and spatial forms to extract both spatial and temporal relationships. We extensively evaluated our model on two benchmark datasets (Human3.6M and MPI-INF-3DHP). The experimental results showed that, compared to other methods, our MixTGFormer achieved state-of-the-art results, with P1 errors of 37.6mm and 15.7mm on these datasets, respectively.

  • 5 authors
·
Apr 19

Robust Power Allocation for UAV-aided ISAC Systems with Uncertain Location Sensing Errors

Unmanned aerial vehicle (UAV) holds immense potential in integrated sensing and communication (ISAC) systems for the Internet of Things (IoT). In this paper, we propose a UAV-aided ISAC framework and investigate three robust power allocation schemes. First, we derive an explicit expression of the Cramér-Rao bound (CRB) based on time-of-arrival (ToA) estimation, which serves as the performance metric for location sensing. Then, we analyze the impact of the location sensing error (LSE) on communications, revealing the inherent coupling relationship between communication and sensing. Moreover, we formulate three robust communication and sensing power allocation problems by respectively characterizing the LSE as an ellipsoidal distributed model, a Gaussian distributed model, and an arbitrary distributed model. Notably, the optimization problems seek to minimize the CRB, subject to data rate and total power constraints. However, these problems are non-convex and intractable. To address the challenges related to the three aforementioned LSE models, we respectively propose to use the {S}-Procedure and alternating optimization ({S}-AO) method, Bernstein-type inequality and successive convex approximation (BI-SCA) method, and conditional value-at-risk (CVaR) and AO (CVaR-AO) method to solve these problems. Finally, simulation results demonstrate the robustness of our proposed UAV-aided ISAC system against the LSE by comparing with the non-robust design, and evaluate the trade-off between communication and sensing in the ISAC system.

  • 5 authors
·
Oct 24, 2023

Beyond Scalar Scores: Reinforcement Learning for Error-Aware Quality Estimation of Machine Translation

Quality Estimation (QE) aims to assess the quality of machine translation (MT) outputs without relying on reference translations, making it essential for real-world, large-scale MT evaluation. Large Language Models (LLMs) have shown significant promise in advancing the field of quality estimation of machine translation. However, most of the QE approaches solely rely on scalar quality scores, offering no explicit information about the translation errors that should drive these judgments. Moreover, for low-resource languages where annotated QE data is limited, existing approaches struggle to achieve reliable performance. To address these challenges, we introduce the first segment-level QE dataset for English to Malayalam, a severely resource-scarce language pair in the QE domain, comprising human-annotated Direct Assessment (DA) scores and Translation Quality Remarks (TQR), which are short, contextual, free-form annotator comments that describe translation errors. We further introduce ALOPE-RL, a policy-based reinforcement learning framework that trains efficient adapters based on policy rewards derived from DA score and TQR. Integrating error-aware rewards with ALOPE-RL, enables LLMs to reason about translation quality beyond numeric scores. Despite being trained on a small-scale QE dataset, ALOPE-RL achieves state-of-the-art performance on English to Malayalam QE using compact LLMs (<=4B parameters}) fine-tuned with LoRA and 4-bit quantization, outperforming both larger LLM-based baselines and leading encoder-based QE models. Our results demonstrate that error-aware, policy-based learning can deliver strong QE performance under limited data and compute budgets. We release our dataset, code, and trained models to support future research.

  • 5 authors
·
Feb 8