Daily Papers

Deploying learned robot manipulation policies in industrial settings requires rigorous pre-deployment validation, yet exhaustive testing across high-dimensional parameter spaces is intractable. We present ROBOGATE, a deployment risk management framework that combines physics-based simulation with a two-stage adaptive sampling strategy to efficiently discover failure boundaries in the operational parameter space. Stage 1 employs Latin Hypercube Sampling (LHS) across an 8-dimensional parameter space to establish a coarse failure landscape from 20,000 uniformly distributed experiments. Stage 2 applies boundary-focused sampling that concentrates 10,000 additional experiments in the 30-70% success rate transition zone, enabling precise failure boundary mapping. Using NVIDIA Isaac Sim with Newton physics, we evaluate a scripted pick-and-place controller on two robot embodiments -- Franka Panda (7-DOF) and UR5e (6-DOF) -- across 30,000 total experiments. Our logistic regression risk model achieves an AUC of 0.780 on the combined dataset (vs. 0.754 for Stage 1 alone), identifies a closed-form failure boundary equation, and reveals four universal danger zones affecting both robot platforms. We further demonstrate the framework on VLA (Vision-Language-Action) model evaluation, where Octo-Small achieves 0.0% success rate on 68 adversarial scenarios versus 100% for the scripted baseline -- a 100-point gap that underscores the challenge of deploying foundation models in industrial settings. ROBOGATE is open-source and runs on a single GPU workstation.

Agent Skills package reusable instructions and assets for tool-using language-model agents. Progressive loading creates failure boundaries poorly represented by session-, model-, or tool-centric traces: a Skill can be discovered but not activated, activated without instructions, or appear successful without an independently verified outcome. We present Skill Runtime Intelligence, a passive runtime-intelligence system that reconstructs supported Skill-lifecycle stages across heterogeneous harnesses while preserving unsupported stages as unknown. Its Run Panorama separates immutable events, deterministic relations, inferred diagnoses, and controlled outcomes with four evidence grades; optional trace import and OTLP/HTTP export support existing observability deployments. Across six frozen repository profiles, three coding agents, and seven clean or fault-injected conditions, all 126 executions preserve source worktrees and each correlates to exactly one source session. Yet adapters expose three distinct semantics: no Skill runs; complete runs but no failure-like events; or failure-like events in every operational-failure and clean session. In a seven-template diagnostic study, semantic aliases and Panorama localize the same six non-clean boundaries but differ in exact/status behavior; both Raw views emit a failure status on all 18 clean cases, while Panorama emits none. A known-rule graph conforms to 126/126 frozen contracts, whereas a second model completes only 228/378 calls. These observations motivate executable adapter qualification and show that event presence is not boundary fidelity, composite exact scores mask distinct errors, and model explanations must not overwrite deterministic facts.

Materials research advances through accumulated experience - scripts that work, protocols that are trusted, warnings attached to failed calculations or experiments, and judgement that links a new question to an old result. This experience is essential for reproducibility and knowledge transfer, yet it is usually fragmented across notebooks, repositories, job logs and individual memory, and it is rarely portable across artificial-intelligence agents. Here we argue that a lifelong AI partner for materials science can be designed around persistent memory rather than around a particular agent implementation. We introduce a self-evolving memory framework that stores scientific experience as inspectable facts and executable skills, so that observations, failure boundaries, protocols and validation checks can be retrieved, revised and migrated across models. We evaluate the idea in three computational settings that expose different layers of materials-research competence. In 49 real-world materials-tool-use questions comprising 138 executable subtasks, memory nearly doubles GPT-5.2 task success without model-parameter updates. In elemental-solid equation-of-state calculations, memory converts a wavefunction-initialization failure into a pre-execution guardrail, improving outcomes from 22/1/4 to 25/2/0 Correct/Partial/Error and avoiding 92% of repeated errors. In 13 practical material simulation workflows, remembered skills and failure facts halve the aggregate trace burden (tokens) and reduce tool calls by over a factor of two by the third round, while preserving physically meaningful outputs in band-gap, phonon, vacancy and work-function analyses. These results show that agent memory can serve as a durable scientific asset; a portable, self-improving record of materials-research experience that outlives any single model or agent stack.

In recent years, unified multimodal models (UMMs) have emerged to support both understanding and generation within a single framework. Mastering dynamic, multi-turn interleaved image-text dialogues is a crucial task for UMMs in real-world applications. However, existing benchmarks fail to evaluate this important task, as they are often limited to single-turn or static settings, and typically overlook exposure bias in multi-turn interactions. To bridge this gap, we propose IMUG-Bench, a comprehensive benchmark for multi-turn interleaved image-text dialogue of UMMs that jointly evaluates their understanding and generation capabilities. Our IMUG-Bench comprises three classes: Static Spatial, Temporal Causal, and Hybrid, covering 3,113 samples and 12,034 interaction turns. It also includes dynamic understanding questions, thereby supporting evaluation that better reflects real-world multi-turn interaction scenarios. Large-scale experiments on IMUG-Bench systematically evaluate mainstream open-source and closed-source UMMs, revealing their capability boundaries and failure modes, and uncovering pronounced exposure bias on the generation side in multi-turn interactions. We further explore several test-time scaling strategies, including Chain-of-Thought, Self-Verification, and Best-of-N Sampling, which effectively improve generation accuracy and mitigate exposure bias in generation tasks. These findings provide insights into enhancing the robustness and multi-turn interaction capability of future UMMs.

Modern CI/CD pipelines integrating agent-generated code exhibit a structural failure in responsibility attribution. Decisions are executed through formally correct approval processes, yet no entity possesses both the authority to approve those decisions and the epistemic capacity to meaningfully understand their basis. We define this condition as responsibility vacuum: a state in which decisions occur, but responsibility cannot be attributed because authority and verification capacity do not coincide. We show that this is not a process deviation or technical defect, but a structural property of deployments where decision generation throughput exceeds bounded human verification capacity. We identify a scaling limit under standard deployment assumptions, including parallel agent generation, CI-based validation, and individualized human approval gates. Beyond a throughput threshold, verification ceases to function as a decision criterion and is replaced by ritualized approval based on proxy signals. Personalized responsibility becomes structurally unattainable in this regime. We further characterize a CI amplification dynamic, whereby increasing automated validation coverage raises proxy signal density without restoring human capacity. Under fixed time and attention constraints, this accelerates cognitive offloading in the broad sense and widens the gap between formal approval and epistemic understanding. Additional automation therefore amplifies, rather than mitigates, the responsibility vacuum. We conclude that unless organizations explicitly redesign decision boundaries or reassign responsibility away from individual decisions toward batch- or system-level ownership, responsibility vacuum remains an invisible but persistent failure mode in scaled agent deployments.

Sycophancy in LLMs is documented across 70+ papers, but expert agreement on construct boundaries remains low (ICC=.184; Ye et al., 2026). The construct fragments because behavioral classification depends on which surface form is privileged. We adopt a materials-science framing: conversation as test specimen under load, LLM-model as material charge, pushback as progressive load, stance-flip as material failure. We characterize this failure across three loading cases (debate n=1000; false-presuppositions n=3400; ethical-setting n=3400; 10-17 material charges per case; 7800 specimens total) using 14 turn-level axis-measurements spanning velocity, damage accumulation, frame-drift, brittleness, and direction stability, plus three speaker-resolved axes from an independent pipeline. The measurements are Hooke-coupled (σ= E cdot varepsilon analog) and reproduce across loading cases with effects up to |r_{rb}| = 0.35 on debate; the sign structure adds a second pattern: the ethical-setting case inverts the velocity and accumulation blocks. Variance composition partitions into two profiles: debate is charge-dominated (brittle-fracture-like: the material grade decides), false-presuppositions and ethical-setting are topic-dominated (creep-like: the load decides); the ratios (2.03 vs 0.13/0.17) are estimator-dependent, for debate even in direction. Cross-judge reliability (GPT-4o vs Haiku 4.5) shows debate scoring is judge-robust (Cohen's κ= 0.88) while false-presupposition scoring is judge-sensitive (κ= 0.36) -- a caveat single-judge benchmarks must report. This is the methodological move Ye et al.'s diagnosis calls for: a multi-axis characterization that does not depend on which surface form of the construct one privileges.

Finetuning provides a scalable and cost-effective means of customizing language models for specific tasks or response styles, with greater reliability than prompting or in-context learning. In contrast, the conventional wisdom is that injecting knowledge via finetuning results in brittle performance and poor generalization. We argue that the dichotomy of "task customization" (e.g., instruction tuning) and "knowledge injection" (e.g., teaching new facts) is a distinction without a difference. We instead identify concrete factors that explain the heterogeneous effectiveness observed with finetuning. To this end, we conduct a large-scale experimental study of finetuning the frontier Gemini v1.5 model family on a spectrum of datasets that are artificially engineered to interpolate between the strengths and failure modes of finetuning. Our findings indicate that question-answer training data formats provide much stronger knowledge generalization than document/article-style training data, numerical information can be harder for finetuning to retain than categorical information, and models struggle to apply finetuned knowledge during multi-step reasoning even when trained on similar examples -- all factors that render "knowledge injection" to be especially difficult, even after controlling for considerations like data augmentation and information volume. On the other hand, our findings also indicate that it is not fundamentally more difficult to finetune information about a real-world event than information about what a model's writing style should be.

LLM-based autonomous agents have demonstrated strong capabilities in reasoning, planning, and tool use, yet remain limited when tasks require sustained coordination across roles, tools, and environments. Multi-agent systems address this through structured collaboration among specialized agents, but tighter coordination also amplifies a less explored risk: errors can propagate across agents and interaction rounds, producing failures that are difficult to diagnose and rarely translate into structural self-improvement. Existing surveys cover individual agent capabilities, multi-agent collaboration, or agent self-evolution separately, leaving the causal dependencies among them unexamined. This survey provides a unified review organized around four causally linked stages, which we term the LIFE progression: Lay the capability foundation, Integrate agents through collaboration, Find faults through attribution, and Evolve through autonomous self-improvement. For each stage, we provide systematic taxonomies and formally characterize the dependencies between adjacent stages, revealing how each stage both depends on and constrains the next. Beyond synthesizing existing work, we identify open challenges at stage boundaries and propose a cross-stage research agenda for closed-loop multi-agent systems capable of continuously diagnosing failures, reorganizing structures, and refining agent behaviors, extending current coordination frameworks toward more self-organizing forms of collective intelligence. By bridging these previously fragmented research threads, this survey aims to offer both a systematic reference and a conceptual roadmap toward autonomous, self-improving multi-agent intelligence.

Long-horizon failure in world models is conventionally attributed to compounding error, a generic framing that does not distinguish what kind of error compounds. We propose a kinematic-vs-dynamic reframing: world models tend to imagine kinematically rather than dynamically. We operationalize this as the imagined Kinematic-Consistency Error, a per-step diagnostic that measures how far a rollout departs from a closed-form kinematic null, paired with a perturbation protocol that tests whether iKCE responds when physical conditions cross a regime boundary. We instantiate the diagnostic on a released DreamerV3 checkpoint trained on DMC walker-walk, where imagined iKCE runs roughly two orders of magnitude above that of matched real-physics rollouts. Across a friction sweep that crosses the gait-collapse boundary, the model's iKCE stays statistically flat even as the trained policy's reward collapses through the same range, providing the kinematic-not-dynamic signature. The diagnostic distinguishes kinematic from dynamic imagination at horizons longer than the embodiment's gait period.

Large language model agents increasingly operate through an intermediate skill layer that mediates between user intent and concrete task execution. This layer is widely treated as an organizational abstraction, but we argue it is also a privilege boundary that current models routinely exceed. We present FORTIS, a benchmark that evaluates over-privilege in agent skills across two stages: whether a model selects the minimally sufficient skill from a large overlapping library, and whether it executes that skill without expanding into broader tools or actions than the skill permits. Across ten frontier models and three domains, we find that over-privileged behavior is the norm rather than the exception. Models consistently reach for higher-privilege skills and tools than the task requires, failing at both stages at rates that remain high even for the strongest available models. Failure is especially severe under the ordinary conditions of real user interaction: incomplete specification, convenience framing, and proximity to skill boundaries. None of these requires adversarial construction. The results indicate that the skill layer, far from containing agent behavior, is itself a primary source of privilege escalation in current systems.

Real-time execution is essential for cyber-physical systems such as robots. These systems operate in dynamic real-world environments where even small delays can undermine responsiveness and compromise performance. Asynchronous inference has recently emerged as a system-level paradigm for real-time robot manipulation, enabling the next action chunk to be predicted while the current one is being executed. While this approach achieves real-time responsiveness, naive integration often results in execution failure. Previous methods attributed this failure to inter-chunk discontinuity and developed test-time algorithms to smooth chunk boundaries. In contrast, we identify another critical yet overlooked factor: intra-chunk inconsistency, where the robot's executed action chunk partially misaligns with its current perception. To address this, we propose REMAC, which learns corrective adjustments on the pretrained policy through masked action chunking, enabling the policy to remain resilient under mismatches between intended actions and actual execution during asynchronous inference. In addition, we introduce a prefix-preserved sampling procedure to reinforce inter-chunk continuity. Overall, our method delivers more reliable policies without incurring additional latency. Extensive experiments in both simulation and real-world settings demonstrate that our method enables faster task execution, maintains robustness across varying delays, and consistently achieves higher completion rates.

The development of native computer-use agents (CUA) represents a significant leap in multimodal AI. However, their potential is currently bottlenecked by the constraints of static data scaling. Existing paradigms relying primarily on passive imitation of static datasets struggle to capture the intricate causal dynamics inherent in long-horizon computer tasks. In this work, we introduce EvoCUA, a native computer use agentic model. Unlike static imitation, EvoCUA integrates data generation and policy optimization into a self-sustaining evolutionary cycle. To mitigate data scarcity, we develop a verifiable synthesis engine that autonomously generates diverse tasks coupled with executable validators. To enable large-scale experience acquisition, we design a scalable infrastructure orchestrating tens of thousands of asynchronous sandbox rollouts. Building on these massive trajectories, we propose an iterative evolving learning strategy to efficiently internalize this experience. This mechanism dynamically regulates policy updates by identifying capability boundaries -- reinforcing successful routines while transforming failure trajectories into rich supervision through error analysis and self-correction. Empirical evaluations on the OSWorld benchmark demonstrate that EvoCUA achieves a success rate of 56.7%, establishing a new open-source state-of-the-art. Notably, EvoCUA significantly outperforms the previous best open-source model, OpenCUA-72B (45.0%), and surpasses leading closed-weights models such as UI-TARS-2 (53.1%). Crucially, our results underscore the generalizability of this approach: the evolving paradigm driven by learning from experience yields consistent performance gains across foundation models of varying scales, establishing a robust and scalable path for advancing native agent capabilities.

The rapid advancement of generators (e.g., StyleGAN, Midjourney, DALL-E) has produced highly realistic synthetic images, posing significant challenges to digital media authenticity. These generators are typically based on a few core architectural families, primarily Generative Adversarial Networks (GANs) and Diffusion Models (DMs). A critical vulnerability in current forensics is the failure of detectors to achieve cross-generator generalization, especially when crossing architectural boundaries (e.g., from GANs to DMs). We hypothesize that this gap stems from fundamental differences in the artifacts produced by these distinct architectures. In this work, we provide a theoretical analysis explaining how the distinct optimization objectives of the GAN and DM architectures lead to different manifold coverage behaviors. We demonstrate that GANs permit partial coverage, often leading to boundary artifacts, while DMs enforce complete coverage, resulting in over-smoothing patterns. Motivated by this analysis, we propose the Triarchy Detector (TriDetect), a semi-supervised approach that enhances binary classification by discovering latent architectural patterns within the "fake" class. TriDetect employs balanced cluster assignment via the Sinkhorn-Knopp algorithm and a cross-view consistency mechanism, encouraging the model to learn fundamental architectural distincts. We evaluate our approach on two standard benchmarks and three in-the-wild datasets against 13 baselines to demonstrate its generalization capability to unseen generators.

Large language models have recently demonstrated remarkable abilities to self-correct their responses through iterative refinement, often referred to as self-consistency or self-reflection. However, the dynamics of this self-correction mechanism may differ substantially depending on whether the model is tasked with open-ended text generation or with selecting the most appropriate response from multiple predefined options. In this paper, we conduct a systematic investigation of these two paradigms by comparing performance trends and error-correction behaviors across various natural language understanding and reasoning tasks, covering language models of different scales and families. Our experimental results reveal distinct patterns of improvement and failure modes: While open-ended generation often benefits from the flexibility of re-interpretation and compositional refinement, multiple-choice selection can leverage clearer solution boundaries but may be limited by the provided options. This contrast also reflects the dual demands faced by emerging agentic LLM applications: effective agents must not only generate and refine open-ended plans or explanations, but also make reliable discrete choices when operating within constrained action spaces. Our findings, therefore, highlight that the design of self-correction mechanisms should take into account the interaction between task structure and output space, with implications for both knowledge-intensive reasoning and decision-oriented applications of LLMs.

Unlimited, or so-called helpful-only language models are trained without safety alignment constraints and never refuse user queries. They are widely used by leading AI companies as internal tools for red teaming and alignment evaluation. For example, if a safety-aligned model produces harmful outputs similar to an unlimited model, this indicates alignment failures that require further attention. Despite their essential role in assessing alignment, such models are not available to the research community. We introduce Jinx, a helpful-only variant of popular open-weight LLMs. Jinx responds to all queries without refusals or safety filtering, while preserving the base model's capabilities in reasoning and instruction following. It provides researchers with an accessible tool for probing alignment failures, evaluating safety boundaries, and systematically studying failure modes in language model safety.

Despite advances in depth estimation, flying points remain a persistent failure mode: near object boundaries, depth estimators often predict spurious 3D points in the empty space between foreground and background surfaces. We trace this artifact to a standard modeling choice: assigning each pixel a single depth hypothesis. At boundaries, a pixel can straddle a foreground and a background surface, so its true depth is ambiguous between the two. A model that predicts a single depth cannot keep both possibilities, so training instead pulls the prediction toward an intermediate depth that lies on neither surface. We address this with MDA, a mixture-density representation that lets the model predict multiple depth hypotheses and their associated probabilities for each pixel. Near boundaries, different hypotheses can align with different surfaces, and the decoded depth is selected from one of these hypotheses rather than placed in the empty space between them. Across different backbones, MDA substantially improves boundary reconstruction and largely removes flying-point artifacts even under severe input blur, while adding negligible runtime overhead. The same mixture-density framework naturally extends to transparent objects, where it predicts multiple depth layers at transparent pixels, and to sky regions, where a dedicated component separates the unbounded sky from finite-depth regions, producing flying-point-free skylines. Project Page: https://biansy000.github.io/mda-site/.

Document Layout analysis (DLA), is the process by which a page is parsed into meaningful elements, often using machine learning models. Typically, the quality of a model is judged using general object detection metrics such as IoU, F1 or mAP. However, these metrics are designed for images that are 2D projections of 3D space, not for the natively 2D imagery of printed media. This discrepancy can result in misleading or uninformative interpretation of model performance by the metrics. To encourage more robust, comparable, and nuanced DLA, we introduce: The Structural Semantic Unit (SSU) a relational labelling approach that shifts the focus from the physical to the semantic structure of the content; and the Coverage, Overlap, Trespass, and Excess (COTe) score, a decomposable metric for measuring page parsing quality. We demonstrate the value of these methods through case studies and by evaluating 5 common DLA models on 3 DLA datasets. We show that the COTe score is more informative than traditional metrics and reveals distinct failure modes across models, such as breaching semantic boundaries or repeatedly parsing the same region. In addition, the COTe score reduces the interpretation-performance gap by up to 76% relative to the F1. Notably, we find that the COTe's granularity robustness largely holds even without explicit SSU labelling, lowering the barriers to entry for using the system. Finally, we release an SSU labelled dataset and a Python library for applying COTe in DLA projects.

The LLM-as-a-Judge paradigm promises scalable rubric-based evaluation, yet aligning frozen black-box models with human standards remains a challenge due to inherent generation stochasticity. We reframe judge alignment as a criteria transfer problem and isolate three recurrent failure modes: rubric instability caused by prompt sensitivity, unverifiable reasoning that lacks auditable evidence, and scale misalignment with human grading boundaries. To address these issues, we introduce RULERS (Rubric Unification, Locking, and Evidence-anchored Robust Scoring), a compiler-executor framework that transforms natural language rubrics into executable specifications. RULERS operates by compiling criteria into versioned immutable bundles, enforcing structured decoding with deterministic evidence verification, and applying lightweight Wasserstein-based post-hoc calibration, all without updating model parameters. Extensive experiments on essay and summarization benchmarks demonstrate that RULERS significantly outperforms representative baselines in human agreement, maintains strong stability against adversarial rubric perturbations, and enables smaller models to rival larger proprietary judges. Overall, our results suggest that reliable LLM judging requires executable rubrics, verifiable evidence, and calibrated scales rather than prompt phrasing alone. Code is available at https://github.com/LabRAI/Rulers.git.

Every generative model for crystalline materials harbors a critical structure size beyond which its outputs quietly become unreliable -- we call this the extrapolation frontier. Despite its direct consequences for nanomaterial design, this frontier has never been systematically measured. We introduce RADII, a radius-resolved benchmark of {sim}75,000 nanoparticle structures (55-11,298 atoms) that treats radius as a continuous scaling knob to trace generation quality from in-distribution to out-of-distribution regimes under leakage-free splits. RADII provides frontier-specific diagnostics: per-radius error profiles pinpoint each architecture's scaling ceiling, surface-interior decomposition tests whether failures originate at boundaries or in bulk, and cross-metric failure sequencing reveals which aspect of structural fidelity breaks first. Benchmarking five state-of-the-art architectures, we find that: (i) all models degrade by {sim}13% in global positional error beyond training radii, yet local bond fidelity diverges wildly across architectures -- from near-zero to over 2times collapse; (ii) no two architectures share the same failure sequence, revealing the frontier as a multi-dimensional surface shaped by model family; and (iii) well-behaved models obey a power-law scaling exponent αapprox 1/3 whose in-distribution fit accurately predicts out-of-distribution error, making their frontiers quantitatively forecastable. These findings establish output scale as a first-class evaluation axis for geometric generative models. The dataset and code are available at https://github.com/KurbanIntelligenceLab/RADII.

Most medical AI benchmarks measure whether a model knows the correct answer. MedFailBench asks a different question: which safety boundary failed? We present a synthetic benchmark and failure atlas built by a clinician. The resource labels medical AI errors by severity from 1 to 5 and safety gate type: missed urgent escalation, unsafe remote dosing, unsafe discharge reassurance, evidence fabrication, unsafe protocol execution, and source support gap. The current public release (v0.2.1) contains 44 synthetic cases reviewed by a clinician, with severity annotations, a public Hugging Face Space source, a safety gate taxonomy, a clinical severity rubric, and an automated pipeline for archiving model response screening runs. Forty cases have a populated safety gate field, and four require gate completion. No patient data, clinical validation claims, or model rankings are included. MedFailBench is released under Apache-2.0 and CC-BY-4.0 and carries the Zenodo DOI 10.5281/zenodo.21205535.

The capability of LLM agents to function as the ``brain'' of a system fundamentally expands the scope of analysis beyond a standalone model. Consequently, safety is no longer only about input--output content alignment. It also concerns system behavior and real-world execution outcomes. However, the current literature is fragmented across attack types, applications, and benchmarks. This makes it hard to explain why failures such as prompt injection, tool misuse, and memory poisoning often share the same structural cause, and how they spread through an agent workflow. In this survey, we treat isolation as a first-class principle for LLM-agent system safety. By isolation, we refer to the separation of user inputs, tool access, execution channels, inter-agent communication, and environment-originated context. We organize the literature with a boundary-centric taxonomy of five boundaries: user-agent, agent-tool, agent-execution, agent-agent, and system-environment. This view helps identify where the loss of isolation first occurs, how compromise propagates across boundaries, and which defenses are most relevant at each interface. We also summarize cross-boundary failure paths, discuss open challenges, and outline a research agenda for isolation-by-construction in future agent systems.

LLM agents can commit durable effects from authority evidence that was valid earlier in execution: a DOM snapshot, approval epoch, version witness, branch token, or worker result. We study the commit boundary at which earlier authority evidence no longer authorizes a durable effect. We call this property commit-time authorization: a durable effect is authorized only if the witness that licensed its derived state remains fresh, causally prior, bound to the same effect, and eligible at commit time. We build a controlled-invalidation suite spanning browser, tool/API, and multi-agent workflows. The suite preserves the user goal and payload shape while invalidating the authority relation before durability. In the primary 54-task matrix, endpoint success remains high: 262/270 runs reach the visible result. Only 55/270 are authorized completions; among the 216 invalidating rows, 207 commit after the authorizing path has failed. All 54 clean controls remain authorized, and a separate 54-run authority-preserving check produces no unauthorized commits. We then evaluate mitigation families. Prompt caution and single-condition checks are insufficient because different hazards break different boundary conditions. Defenses work when they refresh, rebind, replan, or refuse at the durability boundary. CommitGuard, a fail-closed boundary monitor, blocks stale durable-effect attempts on protected commit surfaces when runtimes emit witness, dependency, binding, and eligibility signals. The result is a reporting and runtime-design lesson: endpoint success is a utility metric; authorized commit is a security property.

Large Language Models used in ChatGPT have traditionally been trained to learn a refusal boundary: depending on the user's intent, the model is taught to either fully comply or outright refuse. While this is a strong mitigation for explicitly malicious prompts, focusing safety training on refusals can lead to brittleness for prompts with obscured user intent. Binary refusal boundaries are especially ill-suited for dual-use cases (such as biology or cybersecurity), where a user request can be answered safely at a high level, but in some cases can lead to malicious uplift if sufficiently detailed or actionable. As an alternative, we propose safe-completions: a safety-training approach that centers on the safety of the assistant's output, rather than a binary classification of the user's intent. Safe-completions seek to maximize helpfulness within the safety policy's constraints. We incorporated this approach into GPT-5 and find that across both production comparisons and internally controlled experiments, safe-completion training improves safety (especially on dual-use prompts), reduces the severity of residual safety failures, and substantially increases model helpfulness.

Despite the rapid development of safety alignment techniques for LLMs, defending against multi-turn jailbreaks is still a challenging task. In this paper, we conduct a comprehensive comparison, revealing that some existing defense methods can improve the robustness of LLMs against multi-turn jailbreaks but compromise usability, i.e., reducing general capabilities or causing the over-refusal problem. From the perspective of mechanism interpretability of LLMs, we discover that these methods fail to establish a boundary that exactly distinguishes safe and harmful feature representations. Therefore, boundary-safe representations close to harmful representations are inevitably disrupted, leading to a decline in usability. To address this issue, we propose X-Boundary to push harmful representations away from boundary-safe representations and obtain an exact distinction boundary. In this way, harmful representations can be precisely erased without disrupting safe ones. Experimental results show that X-Boundary achieves state-of-the-art defense performance against multi-turn jailbreaks, while reducing the over-refusal rate by about 20% and maintaining nearly complete general capability. Furthermore, we theoretically prove and empirically verify that X-Boundary can accelerate the convergence process during training. Please see our code at: https://github.com/AI45Lab/X-Boundary.

Safety alignment in Large Language Models is critical for healthcare; however, reliance on binary refusal boundaries often results in over-refusal of benign queries or unsafe compliance with harmful ones. While existing benchmarks measure these extremes, they fail to evaluate Safe Completion: the model's ability to maximise helpfulness on dual-use or borderline queries by providing safe, high-level guidance without crossing into actionable harm. We introduce Health-ORSC-Bench, the first large-scale benchmark designed to systematically measure Over-Refusal and Safe Completion quality in healthcare. Comprising 31,920 benign boundary prompts across seven health categories (e.g., self-harm, medical misinformation), our framework uses an automated pipeline with human validation to test models at varying levels of intent ambiguity. We evaluate 30 state-of-the-art LLMs, including GPT-5 and Claude-4, revealing a significant tension: safety-optimised models frequently refuse up to 80\% of "Hard" benign prompts, while domain-specific models often sacrifice safety for utility. Our findings demonstrate that model family and size significantly influence calibration: larger frontier models (e.g., GPT-5, Llama-4) exhibit "safety-pessimism" and higher over-refusal than smaller or MoE-based counterparts (e.g., Qwen-3-Next), highlighting that current LLMs struggle to balance refusal and compliance. Health-ORSC-Bench provides a rigorous standard for calibrating the next generation of medical AI assistants toward nuanced, safe, and helpful completions. The code and data will be released upon acceptance. red{Warning: Some contents may include toxic or undesired contents.}

Self-improving AI agents are designed to learn from their mistakes. We show they can also hallucinate mistakes that never happened. We study this failure mode in automated harness optimization, where an LLM-based proposer edits an agent's scaffold, including prompts, parsers, filters, validators and guardrails, to eliminate observed failures. But this process rarely asks first: was there a real failure to fix? We introduce the Counterfactual Fabrication Lab, a deterministic micro-lab where the correct action is known: do nothing. The lab plants a candidate guardrail for a failure class that provably never occurs, presents only legal episodes, and uses a byte-exact oracle to check every cited violation. The proposer behaves as expected on real violations and abstains on featureless legal input. Yet when the legal input contains a harmless pattern resembling a familiar game rule, it invents a failure: in 15/60 runs, versus 0/60 on featureless input, it enables the nonexistent-rule guardrail and cites a violation the oracle refutes. The effect is structured, not indiscriminate. In single-shot proposals it appears only when three conditions coincide: a rule-shaped pattern, an open-ended rule set and an instruction that presupposes failures. Removing any of these conditions eliminates the fabrication. Because the invented guardrail changes no true outcome and cannot improve an already-perfect suppression score, the phenomenon is neither reward hacking nor over-refusal. It is a phantom guardrail: a fix for a failure that never happened, invisible to suppression-only acceptance. Inside an add-only accept loop it re-enters even without the failure-presupposing instruction, the loop's keep-adding role supplying the demand the instruction supplied in single shot, and once in it stays. We present the Counterfactual Fabrication Lab for measuring fabricated failures in self-improving agent harnesses.

For deploying foundation models, practitioners increasingly need prescriptive scaling laws: given a pre training compute budget, what downstream accuracy is attainable with contemporary post training practice, and how stable is that mapping as the field evolves? Using large scale observational evaluations with 5k observational and 2k newly sampled data on model performance, we estimate capability boundaries, high conditional quantiles of benchmark scores as a function of log pre training FLOPs, via smoothed quantile regression with a monotone, saturating sigmoid parameterization. We validate the temporal reliability by fitting on earlier model generations and evaluating on later releases. Across various tasks, the estimated boundaries are mostly stable, with the exception of math reasoning that exhibits a consistently advancing boundary over time. We then extend our approach to analyze task dependent saturation and to probe contamination related shifts on math reasoning tasks. Finally, we introduce an efficient algorithm that recovers near full data frontiers using roughly 20% of evaluation budget. Together, our work releases the Proteus 2k, the latest model performance evaluation dataset, and introduces a practical methodology for translating compute budgets into reliable performance expectations and for monitoring when capability boundaries shift across time.

LLM coding agents issue Bash commands through interfaces that may serialize, wrap, and reparse model output. Matched execution scores alone cannot distinguish command-generation errors from failures introduced after generation. QuoteBench measures this boundary with exact final-state validation on 56 one-shot tasks from 14 incident-derived families, crossing the generation contract with the execution transport around one deliberately unescaped added parser. Escaping at the interpolation point reproduces each replayed reply's raw-path outcome, so any recovery under a disclosed boundary must come from the model changing its generation. Across eight same-window configurations, replaying the same reply through the added parser lowers success by 55.4 to 73.2 percentage points; disclosure recovers 30.4 to 60.7 points for six configurations, and zero or slightly negative for the other two. Raw generation is nearly saturated at the frontier; boundary adaptation is what still separates models. GPT-5.6-sol's matched gap of -3.6 points hides -64.3 points of damage and +60.7 points of compensation. The deployment configuration reorders models: one reversal among 26 comparable pairs is unambiguous and four more sit on single-task margins. Evaluations of command-issuing agents should report the model configuration, generation contract, execution path, operating point, and final-state validator rather than treat a matched score as an intrinsic model property.

Under standard graphical assumptions, the Markov boundary of a target variable is the smallest set of features that renders every other feature redundant. Once the boundary is observed, the target is conditionally independent of the rest of the table. This is a tempting object for tabular prediction, since it names exactly the columns a model should need. Yet modern regressors are still trained on the full feature set. We ask whether the Markov boundary is genuinely useful for prediction on SCM3K, a 3,450-task synthetic SCM benchmark with feature counts from 40 to 1000 and six SCM families, evaluated with six regressors. The answer is more nuanced than the theory suggests. Restricting a regressor to the oracle boundary often improves prediction substantially, and the improvement grows as the feature space becomes larger and sparser. But the natural pipeline of recovering the boundary with causal discovery and training on the recovered mask does not deliver. Existing estimators exhaust the compute budget before reaching the regime where the boundary helps most, and even where they run they rarely beat the full feature set. We trace this to three causes. Discovery optimizes structural recovery rather than prediction. False negatives and false positives carry sharply asymmetric predictive cost. The exact boundary is only one of many feature sets that beat all features. We then develop what these facts imply for prediction-aligned feature selection and for tabular models that learn to use causal structure.

Tool-using LLM agents can violate the very policies they are deployed to enforce while appearing to complete the task successfully. In policy-permissive environments, a tool may execute any well-formed call even when the corresponding state transition is forbidden by domain policy. The result is a silent wrong state (a booking cancelled, a passenger count changed, a claim acted on without verification) that neither the tool nor the agent's self-report exposes. We study this failure mode in the τ^2-bench airline domain. On a budget agent, 78% of observed failures are silent wrong-state failures with no tool error, and the aggregate failure rate is reproducible across disjoint seeds, not sampling noise. We then evaluate a lightweight intervention: deterministic, read-only pre-execution gates that inspect the proposed call and current state before allowing a write. A four-gate suite raises full-benchmark success from 29.6% to 42.0% on gpt-4o-mini (+12.4pp; paired task-level bootstrap P=0.0012), and the lift reproduces on a disjoint 15-seed set (+12.3pp; P=0.0008). The effect is concentrated where the gates fire: on the 26/50 firing tasks, success rises by +19.2pp, while movement on the 24 non-firing tasks does not exclude zero. Two negative controls (a self-enforcing retail domain and BFCL) bound the mechanism: gates help when tools are policy-permissive and add little where tools already self-enforce. As suggestive evidence, not a central claim, the same failure mode persists at the frontier: gpt-5.2 at default reasoning still attempts policy-violating writes, and the same suite improves success from 61.2% to 71.6% (+10.4pp; P=0.020; n=5, no replication). The contribution is a bounded evaluation and reliability result: deterministic gates do not guarantee task success, but they can deterministically prevent a known class of silent policy-violating writes at the action boundary.

In Agentic AI, Large Language Models (LLMs) are increasingly used in the orchestration layer to coordinate multiple agents and to interact with external services, retrieval components, and shared memory. In this setting, failures are not limited to incorrect final outputs. They also arise from long-horizon interaction, stochastic decisions, and external side effects (such as API calls, database writes, and message sends). Common failures include non-termination, role drift, propagation of unsupported claims, and attacks via untrusted context or external channels. This paper presents an assurance framework for such Agentic AI systems. Executions are instrumented as Message-Action Traces (MAT) with explicit step and trace contracts. Contracts provide machine-checkable verdicts, localize the first violating step, and support deterministic replay. The framework includes stress testing, formulated as a budgeted counterexample search over bounded perturbations. It also supports structured fault injection at service, retrieval, and memory boundaries to assess containment under realistic operational faults and degraded conditions. Finally, governance is treated as a runtime component, enforcing per-agent capability limits and action mediation (allow, rewrite, block) at the language-to-action boundary. To support comparative evaluations across stochastic seeds, models, and orchestration configurations, the paper defines trace-based metrics for task success, termination reliability, contract compliance, factuality indicators, containment rate, and governance outcome distributions. More broadly, the framework is intended as a common abstraction to support testing and evaluation of multi-agent LLM systems, and to facilitate reproducible comparison across orchestration designs and configurations.

This work identifies a critical failure mode in frontier large language models (LLMs), which we term Internal Safety Collapse (ISC): under certain task conditions, models enter a state in which they continuously generate harmful content while executing otherwise benign tasks. We introduce TVD (Task, Validator, Data), a framework that triggers ISC through domain tasks where generating harmful content is the only valid completion, and construct ISC-Bench containing 53 scenarios across 8 professional disciplines. Evaluated on JailbreakBench, three representative scenarios yield worst-case safety failure rates averaging 95.3% across four frontier LLMs (including GPT-5.2 and Claude Sonnet 4.5), substantially exceeding standard jailbreak attacks. Frontier models are more vulnerable than earlier LLMs: the very capabilities that enable complex task execution become liabilities when tasks intrinsically involve harmful content. This reveals a growing attack surface: almost every professional domain uses tools that process sensitive data, and each new dual-use tool automatically expands this vulnerability--even without any deliberate attack. Despite substantial alignment efforts, frontier LLMs retain inherently unsafe internal capabilities: alignment reshapes observable outputs but does not eliminate the underlying risk profile. These findings underscore the need for caution when deploying LLMs in high-stakes settings. Source code: https://github.com/wuyoscar/ISC-Bench

AI agents often fail in ways that are difficult to localize because executions are probabilistic, long-horizon, multi-agent, and mediated by noisy tool outputs. We address this gap by manually annotating failed agent runs and release a novel benchmark of 115 failed trajectories spanning structured API workflows, incident management, and open-ended web/file tasks. Each trajectory is annotated with a critical failure step and a category from a grounded-theory derived, cross-domain failure taxonomy. To mitigate the human cost of failure attribution, we present AGENTRX, an automated domain-agnostic diagnostic framework that pinpoints the critical failure step in a failed agent trajectory. It synthesizes constraints, evaluates them step-by-step, and produces an auditable validation log of constraint violations with associated evidence; an LLM-based judge uses this log to localize the critical step and category. Our framework improves step localization and failure attribution over existing baselines across three domains.

Large language models are increasingly deployed as *deep agents* that plan, maintain persistent state, and invoke external tools, shifting safety failures from unsafe text to unsafe *trajectories*. We introduce **AgentFence**, an architecture-centric security evaluation that defines 14 trust-boundary attack classes spanning planning, memory, retrieval, tool use, and delegation, and detects failures via *trace-auditable conversation breaks* (unauthorized or unsafe tool use, wrong-principal actions, state/objective integrity violations, and attack-linked deviations). Holding the base model fixed, we evaluate eight agent archetypes under persistent multi-turn interaction and observe substantial architectural variation in mean security break rate (MSBR), ranging from 0.29 pm 0.04 (LangGraph) to 0.51 pm 0.07 (AutoGPT). The highest-risk classes are operational: Denial-of-Wallet (0.62 pm 0.08), Authorization Confusion (0.54 pm 0.10), Retrieval Poisoning (0.47 pm 0.09), and Planning Manipulation (0.44 pm 0.11), while prompt-centric classes remain below 0.20 under standard settings. Breaks are dominated by boundary violations (SIV 31%, WPA 27%, UTI+UTA 24%, ATD 18%), and authorization confusion correlates with objective and tool hijacking (ρapprox 0.63 and ρapprox 0.58). AgentFence reframes agent security around what matters operationally: whether an agent stays within its goal and authority envelope over time.

Recent advancements in quality control across various industries have increasingly utilized the integration of video cameras and image processing for effective defect detection. A critical barrier to progress is the scarcity of comprehensive datasets featuring annotated defects, which are essential for developing and refining automated defect detection models. This systematic review, spanning from 2015 to 2023, identifies 15 publicly available datasets and critically examines them to assess their effectiveness and applicability for benchmarking and model development. Our findings reveal a diverse landscape of datasets, such as NEU-CLS, NEU-DET, DAGM, KolektorSDD, PCB Defect Dataset, and the Hollow Cylindrical Defect Detection Dataset, each with unique strengths and limitations in terms of image quality, defect type representation, and real-world applicability. The goal of this systematic review is to consolidate these datasets in a single location, providing researchers who seek such publicly available resources with a comprehensive reference.

The deployment of embodied agents in self-driving laboratories could accelerate scientific discovery, yet their reliability is constrained by the irreversible and safety-critical nature of chemical experiments. Progress is further hindered by scarce failure data and the lack of fine-grained evaluation protocols. To address these challenges, we introduce LabRobFail, a failure-centric framework for learning and evaluating robotic failure analysis in chemical laboratories. LabRobFail-Sim injects controllable failures at the control, physics, and semantic levels, enabling the construction of LabRobFail-Data, which contains over 20,000 trajectories across 70+ task scenarios, five failure categories, and 11 fine-grained failure types. LabRobFail-Bench evaluates six capabilities spanning task understanding, failure detection, temporal localization, severity assessment, failure classification, and actionable correction. We further develop LabRobFail-VLM, a domain-specialized vision-language model that generates structured failure diagnoses and recovery instructions. On seen environments, it achieves 90.83% failure-detection accuracy and 77.21% temporal-localization accuracy, substantially outperforming general-purpose VLMs. When integrated as a real-time supervisor, it improves downstream task success rates by 4-16 percentage points, demonstrating the value of fine-grained failure understanding for closed-loop recovery and reliable laboratory autonomy. Our code and data are available at https://github.com/Su-ISE-2001/SciRobo

Customer-service LLM agents must follow organizational policy when acting on a user's behalf. Compliance failures arise from either forbidden actions, such as granting an ineligible change, or omitted procedural requirements, such as identification or confirmation. Runtime safeguards can intervene on risky actions, but action-local checks do not guide an agent through a multi-step procedure. Workflow-following systems support prescribed process execution, but primarily target workflow completion rather than safeguarding agent behavior. PolicyGuide instead compiles each domain policy into a workflow graph and invokes a proactive verifier at user-turn boundaries. From persisted graph state, the verifier reconciles open requests and returns step-specific remediation along a policy-compliant path. Across the τ^2-bench airline, retail, and telecom domains with a GPT-5.4 agent and verifier, PolicyGuide raises mean Pass^4 from 0.42 to 0.62, with the largest gain on telecom (0.19 to 0.61), the most workflow-structured domain. The same workflows transfer to Claude Sonnet 4.6 and Gemini 2.5 Pro agents. Complementary evaluations find the lowest observed attack-success rate under adversarial users and the strongest procedural compliance in an author-designed workflow-level validation.

As modern microservice systems grow increasingly popular and complex-often consisting of hundreds or even thousands of fine-grained, interdependent components-they are becoming more susceptible to frequent and subtle failures. Ensuring system reliability therefore hinges on accurate and efficient failure localization. Traditional failure localization approaches based on small models lack the flexibility to adapt to diverse failure scenarios, while recent LLM-based methods suffer from two major limitations: they often rely on rigid invocation workflows that constrain the model's ability to dynamically explore optimal localization paths, and they require resource-intensive inference, making them cost-prohibitive for real-world deployment. To address these challenges, we explore the use of reinforcement fine-tuning to equip lightweight LLMs with reasoning and self-refinement capabilities, significantly improving the cost-effectiveness and adaptability of LLM-based failure localization. We begin with an empirical study to identify three key capabilities essential for accurate localization. Building on these insights, we propose a progressive multi-stage GRPO fine-tuning framework, which integrates a multi-factor failure localization grader and a recursion-of-thought actor module. The resulting model, ThinkFL, not only outperforms existing state-of-the-art LLMs and baseline methods in localization accuracy but also reduces end-to-end localization latency from minutes to seconds, demonstrating strong potential for real-world applications.

Safety benchmark scores provide incomplete evidence of deployment readiness: aligned language models often adhere to rigid rules even when a situational update flips which action is safe. We term this failure brittle safety. To diagnose it, we introduce context-flip evaluation, testing 12 models across a safety benchmark (PacifAIst) and two commonsense controls using paired variants where the nominally safe action produces harm. Three findings emerge. First, brittle safety is safety-specific: all 12 models exhibit a safety-commonsense gap (mean +17.4 pp). Baseline accuracy fails to predict brittleness: among models above 90% baseline accuracy, brittleness rates range from 13.7% to 90.0%. Second, failures stem from policy override rather than miscomprehension: despite acknowledging the context change in every case, models persist via three distinct mechanisms that vary by update type and model family. Third, on a hand-audited probe of catastrophic consequence-flip scenarios, standard action-level guardrails catch none, while a state-aware validator catches all without false alarms on correct interventions. This indicates that action-level content moderation is systematically blind to consequence-flips, motivating state-aware architectural alternatives. We release our protocol, perturbed benchmarks, and deployment probe.

Tool-using automation systems, from scripts and CI bots to agentic assistants, fail in recurring patterns. Common failures include unsafe side effects, invalid arguments, uncontrolled retries, and leakage of sensitive outputs. Many mitigations are model-centric and prompt-dependent, so they are brittle and do not generalize to non-LLM callers. We present Policy-First Tooling, a model-agnostic permission layer that mediates tool invocation through explicit constraints, risk-aware gating, recovery controls, and auditable explanations. The paper contributes a compact policy DSL, a runtime enforcement architecture with actionable rationale and fix hints, and a reproducible benchmark based on trace replay with controlled fault and misuse injection. In 225 controlled runs across five policy packs and three fault profiles, stricter packs improve violation prevention from 0.000 in P0 to 0.681 in P4, while task success drops from 0.356 to 0.067. Retry amplification decreases from 3.774 in P0 to 1.378 in P4, and leakage recall reaches 0.875 under injected secret outputs. These results make safety to utility trade-offs explicit and measurable.

A prevalent assumption in LLM agent deployment holds that more structured harnesses universally improve reliability, and that higher-capability models need proportionally less structural guidance -- together implying a monotone inverse relationship between model capability tier and optimal harness complexity. We test this hypothesis through a controlled 432-run experiment crossing six models across four capability tiers with three harness conditions (light, balanced, strict) on HEAT-24, a 24-task synthetic benchmark with git-based workspace verification. Our results refute the monotone inverse relationship on two fronts. First, for the frontier chat model evaluated (Gemini 2.5 Flash), increased harness verbosity lowers VTSR by 29-38 percentage points -- a harness-complexity paradox. Second, for the frontier reasoning model evaluated (Qwen3.5-122B, extended thinking enabled), strict harness achieves the highest VTSR (91.7%) and the lowest latency, the opposite of the prediction. Within the constrained tier, a 2B model (Gemma4:e2B) matches strong-open-tier stability at 91.7% across all harnesses. Because each tier is represented by a single model in this study, these results should be interpreted as model-specific observations; harness sensitivity appears non-monotone across the models evaluated, and depends critically on model type (chat vs. reasoning). We introduce a six-label failure taxonomy showing that format_violation dominates capable-model failures while wrong_file dominates low-capability failures, and we derive practical tier-aware harness selection guidelines.

Monitoring complex industrial assets relies on engineer-authored symbolic rules that trigger based on sensor conditions and prompt technicians to perform corrective actions. The bottleneck is not detection but response: translating rules into maintenance steps requires asset-specific knowledge gained through years of practice. We investigate whether LLMs can serve as decision support for this rule-to-action step and introduce , a benchmark of 6{,}690 expert-validated multiple-choice questions from 118 rule-action pairs across 16 asset types. We contribute (i) a symbolic-to-MCQA pipeline normalizing rules to Disjunctive Normal Form with embedding-based distractor sampling, (ii) five variants probing distinct failure modes (Pro, Pert, Verbose, Aug, Rationale), and (iii) a benchmark of 29 LLMs and 4 embedding baselines. A human evaluation (9 practitioners, mean 45.0\%) confirms requires specialist knowledge beyond operational experience. Three findings stand out. The frontier has closed: the top three LLMs lie within one Macro point, with Bradley-Terry Elo placing claude-opus-4-6 30 points above the next model. Yet \,Pro exposes brittleness, with every model losing 13--60\% relative accuracy under distractor expansion. \,Aug exposes pattern-matching: under condition inversion, frontier models still select the original answer 49--63\% of the time. The deployment bottleneck is not capability but calibration: frontier models handle template-style fault detection but break under structural perturbation.

Model collapse is a central challenge in learning from synthetic data: as later-generation large language models (LLMs) are trained on an increasing proportion of model-generated data, performance can degrade due to narrowed coverage and accumulated bias. Existing work mainly studies how to bound this degradation. In iterative model evolution, however, the more meaningful objective is to ensure that each successive model improves over its predecessor, which requires diagnosing collapse at a granularity that is actionable for data curation. We study this problem in synthetic data self-improving for instruction tuning. We show that collapse in this setting is not simply uniform performance degradation, but can appear as a polarization of competence, where synthetic training reinforces already strong skills while further degrading weak ones. Motivated by this observation, we propose KITE (Knowledge-boundary Instruction Tuning via Exploration), a two-stage framework that combines failure-guided data generation with boundary-aware uncertainty curation. Experiments across several datasets and multiple open-source LLMs show that KITE yields more stable improvement than strong synthetic-data baselines.

Anomaly detection aims at detecting unexpected behaviours in the data. Because anomaly detection is usually an unsupervised task, traditional anomaly detectors learn a decision boundary by employing heuristics based on intuitions, which are hard to verify in practice. This introduces some uncertainty, especially close to the decision boundary, that may reduce the user trust in the detector's predictions. A way to combat this is by allowing the detector to reject examples with high uncertainty (Learning to Reject). This requires employing a confidence metric that captures the distance to the decision boundary and setting a rejection threshold to reject low-confidence predictions. However, selecting a proper metric and setting the rejection threshold without labels are challenging tasks. In this paper, we solve these challenges by setting a constant rejection threshold on the stability metric computed by ExCeeD. Our insight relies on a theoretical analysis of such a metric. Moreover, setting a constant threshold results in strong guarantees: we estimate the test rejection rate, and derive a theoretical upper bound for both the rejection rate and the expected prediction cost. Experimentally, we show that our method outperforms some metric-based methods.

Austenitic 347H stainless steel offers superior mechanical properties and corrosion resistance required for extreme operating conditions such as high temperature. The change in microstructure due to composition and process variations is expected to impact material properties. Identifying microstructural features such as grain boundaries thus becomes an important task in the process-microstructure-properties loop. Applying convolutional neural network (CNN) based deep-learning models is a powerful technique to detect features from material micrographs in an automated manner. Manual labeling of the images for the segmentation task poses a major bottleneck for generating training data and labels in a reliable and reproducible way within a reasonable timeframe. In this study, we attempt to overcome such limitations by utilizing multi-modal microscopy to generate labels directly instead of manual labeling. We combine scanning electron microscopy (SEM) images of 347H stainless steel as training data and electron backscatter diffraction (EBSD) micrographs as pixel-wise labels for grain boundary detection as a semantic segmentation task. We demonstrate that despite producing instrumentation drift during data collection between two modes of microscopy, this method performs comparably to similar segmentation tasks that used manual labeling. Additionally, we find that naïve pixel-wise segmentation results in small gaps and missing boundaries in the predicted grain boundary map. By incorporating topological information during model training, the connectivity of the grain boundary network and segmentation performance is improved. Finally, our approach is validated by accurate computation on downstream tasks of predicting the underlying grain morphology distributions which are the ultimate quantities of interest for microstructural characterization.

We identify a structural weakness in current large language model (LLM) alignment: modern refusal mechanisms are fail-open. While existing approaches encode refusal behaviors across multiple latent features, suppressing a single dominant feature-via prompt-based jailbreaks-can cause alignment to collapse, leading to unsafe generation. Motivated by this, we propose fail-closed alignment as a design principle for robust LLM safety: refusal mechanisms should remain effective even under partial failures via redundant, independent causal pathways. We present a concrete instantiation of this principle: a progressive alignment framework that iteratively identifies and ablates previously learned refusal directions, forcing the model to reconstruct safety along new, independent subspaces. Across four jailbreak attacks, we achieve the strongest overall robustness while mitigating over-refusal and preserving generation quality, with small computational overhead. Our mechanistic analyses confirm that models trained with our method encode multiple, causally independent refusal directions that prompt-based jailbreaks cannot suppress simultaneously, providing empirical support for fail-closed alignment as a principled foundation for robust LLM safety.

Hypernetwork-based methods such as Doc-to-LoRA internalize a document into an LLM's weights in a single forward pass, but they fail systematically on conflicts: when the document contradicts pretraining knowledge, accuracy collapses to 46.4% on the deepest facts. We show the failure is a magnitude problem rather than a representational one. The hypernetwork already targets the right layers, but its adapter margin is approximately constant across documents while the pretrained margin grows with training frequency, so deep conflicts lose by construction. The account predicts that failure should track prior strength: sorting 194 conflicts by the base model's log-probability on the contradicted fact, baseline accuracy falls from 68% on weak-prior questions to 16% on strong-prior ones, a 52 percentage-point gap. The cure is amplitude. Selective Layer Boosting scales the adapter at its top-norm layers, and Conflict-Aware Internalization triggers boosting only when the base model is confident. Both are training-free; together they raise deep-conflict accuracy from 46.4% to 71.0% on Gemma-2B and from 53.6% to 72.5% on Mistral-7B while preserving novel-knowledge recall, and beat vanilla retrieval-augmented generation on medium conflicts by 18 percentage points despite operating entirely in parameter space. We release KID-Bench, a 489-question benchmark that separates novel recall, cross-knowledge combination, and prior-graded conflicts.

Large language models generate computationally expensive yet semantically void reasoning on beyond-capability tasks, creating risks where plausible-sounding but incorrect derivations mislead users. We characterize this futile reasoning phenomenon through systematic analysis, revealing universal capability overreach and systematic miscalibration between capability and behavior. The dominant failure mode is specious reasoning, which outputs look superficially valid but contain subtle errors, escalating with task difficulty. To address this, we introduce CaRL (Capability-aligned Reinforcement Learning), which aligns model behavior with capability boundaries through reward shaping that incentivizes refusal over futile reasoning and hindsight refusal augmentation that converts failures into refusal supervision. Experiments demonstrate a substantial reduction in futile reasoning while preserving performance across task difficulties, effectively achieving capability-aligned behavior without sacrificing utility. https://github.com/icip-cas/Knowing-When-to-Quit

While understanding the knowledge boundaries of LLMs is crucial to prevent hallucination, research on knowledge boundaries of LLMs has predominantly focused on English. In this work, we present the first study to analyze how LLMs recognize knowledge boundaries across different languages by probing their internal representations when processing known and unknown questions in multiple languages. Our empirical studies reveal three key findings: 1) LLMs' perceptions of knowledge boundaries are encoded in the middle to middle-upper layers across different languages. 2) Language differences in knowledge boundary perception follow a linear structure, which motivates our proposal of a training-free alignment method that effectively transfers knowledge boundary perception ability across languages, thereby helping reduce hallucination risk in low-resource languages; 3) Fine-tuning on bilingual question pair translation further enhances LLMs' recognition of knowledge boundaries across languages. Given the absence of standard testbeds for cross-lingual knowledge boundary analysis, we construct a multilingual evaluation suite comprising three representative types of knowledge boundary data. Our code and datasets are publicly available at https://github.com/DAMO-NLP-SG/LLM-Multilingual-Knowledge-Boundaries.

The abundance of data has given machine learning considerable momentum in natural sciences and engineering, though modeling of physical processes is often difficult. A particularly tough problem is the efficient representation of geometric boundaries. Triangularized geometric boundaries are well understood and ubiquitous in engineering applications. However, it is notoriously difficult to integrate them into machine learning approaches due to their heterogeneity with respect to size and orientation. In this work, we introduce an effective theory to model particle-boundary interactions, which leads to our new Boundary Graph Neural Networks (BGNNs) that dynamically modify graph structures to obey boundary conditions. The new BGNNs are tested on complex 3D granular flow processes of hoppers, rotating drums and mixers, which are all standard components of modern industrial machinery but still have complicated geometry. BGNNs are evaluated in terms of computational efficiency as well as prediction accuracy of particle flows and mixing entropies. BGNNs are able to accurately reproduce 3D granular flows within simulation uncertainties over hundreds of thousands of simulation timesteps. Most notably, in our experiments, particles stay within the geometric objects without using handcrafted conditions or restrictions.

Vision-language-action (VLA) models provide a promising paradigm for scalable robotic manipulation, yet their reliance on success-only behavioral cloning leaves them brittle; lacking corrective training signals, minor execution errors rapidly compound into unrecoverable, out-of-distribution failures. To address this limitation, we propose Adaptive Failure-Informed Learning (AFIL), an end-to-end framework that leverages failure trajectories as adaptive negative guidance for diffusion- and flow-based VLA policies. AFIL uses a pretrained VLA to generate failure rollouts online, avoiding the need for handcrafted failure-mode design or human-in-the-loop recovery. It then jointly trains Dual Action Generators (DAGs) for successful and failed behaviors while sharing a common vision-language backbone, enabling efficient failure-aware policy learning with limited parameter overhead. During sampling, the failure generator adaptively steers action generation away from failure-prone regions and toward more reliable success modes, with guidance strength determined by the per-diffusion-step distance between success and failure distributions. Experiments across in-domain and out-of-domain robotic manipulation tasks, covering both short- and long-horizon settings, show that AFIL consistently improves task success rates and robustness over existing VLA baselines, demonstrating its effectiveness, efficiency, and generality.

Domain expertise enhances judgment within boundaries but creates systematic vulnerabilities specifically at borders. We term this Transitive Expert Error (TEE), distinct from Dunning-Kruger effects, requiring calibrated expertise as precondition. Mechanisms enabling reliable within-domain judgment become liabilities when structural similarity masks causal divergence. Two core mechanisms operate: structural similarity bias causes experts to overweight surface features (shared vocabulary, patterns, formal structure) while missing causal architecture differences; authority persistence maintains confidence across competence boundaries through social reinforcement and metacognitive failures (experts experience no subjective uncertainty as pattern recognition operates smoothly on familiar-seeming inputs.) These mechanism intensify under three conditions: shared vocabulary masking divergent processes, social pressure for immediate judgment, and delayed feedback. These findings extend to AI routing architectures (MoE systems, multi-model orchestration, tool-using agents, RAG systems) exhibiting routing-induced failures (wrong specialist selected) and coverage-induced failures (no appropriate specialist exists). Both produce a hallucination phenotype: confident, coherent, structurally plausible but causally incorrect outputs at domain boundaries. In human systems where mechanisms are cognitive black boxes; AI architectures make them explicit and addressable. We propose interventions: multi-expert activation with disagreement detection (router level), boundary-aware calibration (specialist level), and coverage gap detection (training level). TEE has detectable signatures (routing patterns, confidence-accuracy dissociations, domain-inappropriate content) enabling monitoring and mitigation. What remains intractable in human cognition becomes addressable through architectural design.

Neural speaker diarization is widely used for overlap-aware speaker diarization, but it requires large multi-speaker datasets for training. To meet this data requirement, large datasets are often constructed by combining multiple corpora, including those originally designed for multi-speaker automatic speech recognition (ASR). However, ASR datasets often feature loosely defined segment boundaries that do not align with the stricter conventions of diarization benchmarks. In this work, we show that such boundary looseness significantly impacts the diarization error rate, reducing evaluation reliability. We also reveal that models trained on data with varying boundary precision tend to learn dataset-specific looseness, leading to poor generalization across out-of-domain datasets. Training with standardized tight boundaries via forced alignment improves not only diarization performance, especially in streaming scenarios, but also ASR performance when combined with simple post-processing.

Vision-Language-Action (VLA) models enable robots to follow natural language instructions and generalize across diverse tasks, but they remain vulnerable to execution failures that compromise reliability in real-world deployment. Detecting such failures during execution is therefore critical for the robust deployment of embodied systems. Existing failure detection methods either rely on expensive action resampling or external models, while alternatives propagate trajectory-level labels uniformly across every timestep, obscuring localized failure signals. In this paper, we propose Hide-and-Seek, a framework that formulates VLA failure detection as a coarsely supervised learning problem. By combining inter-trajectory and intra-trajectory contrastive objectives, Hide-and-Seek localizes failure-indicative actions and induces temporally structured failure signals from trajectory-level supervision alone, without any step-level annotation. We evaluate Hide-and-Seek on LIBERO, VLABench, and a real-world robotic platform across three representative VLA policies: OpenVLA, π_0, and π_{0.5}.Our method achieves state-of-the-art multi-task failure detection performance with a practical accuracy--timeliness trade-off under conformal prediction, and generalizes well to both seen and unseen tasks.

Large language models (LLMs) show inherent brittleness in their safety mechanisms, as evidenced by their susceptibility to jailbreaking and even non-malicious fine-tuning. This study explores this brittleness of safety alignment by leveraging pruning and low-rank modifications. We develop methods to identify critical regions that are vital for safety guardrails, and that are disentangled from utility-relevant regions at both the neuron and rank levels. Surprisingly, the isolated regions we find are sparse, comprising about 3% at the parameter level and 2.5% at the rank level. Removing these regions compromises safety without significantly impacting utility, corroborating the inherent brittleness of the model's safety mechanisms. Moreover, we show that LLMs remain vulnerable to low-cost fine-tuning attacks even when modifications to the safety-critical regions are restricted. These findings underscore the urgent need for more robust safety strategies in LLMs.

Proactive interventions by LLM critic models are often assumed to improve reliability, yet their effects at deployment time are poorly understood. We show that a binary LLM critic with strong offline accuracy (AUROC 0.94) can nevertheless cause severe performance degradation, inducing a 26 percentage point (pp) collapse on one model while affecting another by near zero pp. This variability demonstrates that LLM critic accuracy alone is insufficient to determine whether intervention is safe. We identify a disruption-recovery tradeoff: interventions may recover failing trajectories but also disrupt trajectories that would have succeeded. Based on this insight, we propose a pre-deployment test that uses a small pilot of 50 tasks to estimate whether intervention is likely to help or harm, without requiring full deployment. Across benchmarks, the test correctly anticipates outcomes: intervention degrades performance on high-success tasks (0 to -26 pp), while yielding a modest improvement on the high-failure ALFWorld benchmark (+2.8 pp, p=0.014). The primary value of our framework is therefore identifying when not to intervene, preventing severe regressions before deployment.

Multi-turn tool-use RL is bottlenecked by the rapid depletion of informative samples in static datasets. We observe that the gradient signal in GRPO concentrates on tasks with the highest rollout reward variance, a consequence of the Popoviciu upper bound. Consequently, samples near the agent's capability boundary -- where successes and failures are roughly balanced -- contribute disproportionately large policy gradients. As training progresses, this boundary continuously shifts, which gradually depletes the pool of informative samples in a static dataset. We propose RODS (Reward-driven Online Data Synthesis) to resolve this depletion. RODS closes the loop between RL training and data generation by repurposing the progress reward variance as a practical, zero-cost boundary detector that requires no extra inference beyond the rollouts already computed for training. It continuously identifies such boundary samples, synthesizes new multi-turn variants matching their structural complexity (e.g., API topology and dependency depth) via a skill-aligned resampling pipeline, and manages a dynamic replay buffer that co-evolves with the policy. Starting from 400 human seeds and maintaining an active training pool of ~800 samples, RODS achieves comparable performance to a 17K-sample offline pipeline while requiring roughly 20x fewer trajectories, and improves over fixed-data RL and environment augmentation in our controlled setting.

Using fault-tolerant constructions, computations performed with unreliable components can simulate their noiseless counterparts though the introduction of a modest amount of redundancy. Given the modest overhead required to achieve fault-tolerance, and the fact that increasing the reliability of basic components often comes at a cost, are there situations where fault-tolerance may be more economical? We present a general framework to account for this overhead cost in order to effectively compare fault-tolerant to non-fault-tolerant approaches for computation, in the limit of small logical error rates. Using this detailed accounting, we determine explicit boundaries at which fault-tolerant designs become more efficient than designs that achieve comparable reliability through direct consumption of resources. We find that the fault-tolerant construction is always preferred in the limit of high reliability in cases where the resources required to construct a basic unit grows faster than log(1 / epsilon) asymptotically for small epsilon.

Imitation learning (IL) with generative models, such as diffusion and flow matching, has enabled robots to perform complex, long-horizon tasks. However, distribution shifts from unseen environments or compounding action errors can still cause unpredictable and unsafe behavior, leading to task failure. Early failure prediction during runtime is therefore essential for deploying robots in human-centered and safety-critical environments. We propose FIPER, a general framework for Failure Prediction at Runtime for generative IL policies that does not require failure data. FIPER identifies two key indicators of impending failure: (i) out-of-distribution (OOD) observations detected via random network distillation in the policy's embedding space, and (ii) high uncertainty in generated actions measured by a novel action-chunk entropy score. Both failure prediction scores are calibrated using a small set of successful rollouts via conformal prediction. A failure alarm is triggered when both indicators, aggregated over short time windows, exceed their thresholds. We evaluate FIPER across five simulation and real-world environments involving diverse failure modes. Our results demonstrate that FIPER better distinguishes actual failures from benign OOD situations and predicts failures more accurately and earlier than existing methods. We thus consider this work an important step towards more interpretable and safer generative robot policies. Code, data and videos are available at https://tum-lsy.github.io/fiper_website.

Multi-provider LLM gateways reverse proxies that route, load-balance, and rate-limit requests across foundation-model APIs have become critical production infrastructure. Yet the failure modes specific to this architectural layer remain undocumented, scattered across issue trackers and post-mortems with no unifying framework. We introduce , a two-axis taxonomy that classifies failures by their origin layer (Network/Transport, Streaming/Protocol, State/Session, Model~Behavior, Governance/Cost) and their detectability (Loud vs.\ Silent). We populate this taxonomy with five verified catalog entries sourced from public bug reports and first-hand stress testing, each accompanied by a mechanistic root-cause analysis. Three entries include standalone reproduction scripts. Our principal finding is that the most operationally severe failures are silent: they return HTTP~200, pass every standard health check, and corrupt application state in ways that require semantic-level observability to detect. Two such silent failures a concurrency race condition causing history loss and a streaming index collision corrupting tool-call payloads were discovered first-hand during evaluation campaigns.

Refusal rates are a poor proxy for LLM safety, i.e., a model may over-refuse benign prompts while still complying with harmful ones. We audit both failure modes across 21 open-weight LLMs on four safety benchmarks (OR-Bench, XSTest, ToxiGen, BOLD), using a composition adjustment to isolate model sensitivity from dataset toxicity confounds. We report three findings. First, models adopt fundamentally different calibration strategies: conservative ecosystems such as Llama suppress unsafe outputs at the cost of elevated over-refusals, while permissive ecosystems such as DeepSeek and Qwen preserve helpfulness but tolerate higher harmful compliance. Second, demographic protection is unequal: models over-protect prominent racial and religious groups, frequently refusing even benign prompts about them, while providing substantially weaker protection against disability-targeted attacks. Third, refusal and compliance tendencies are stable within model families across generations and scales, suggesting that post-training objectives shape safety behavior more than architecture. Our results call for joint, demographically-aware, and multi-judge safety evaluation.

Some fractals -- for instance those associated with the Mandelbrot and quadratic Julia sets -- are computed by iterating a function, and identifying the boundary between hyperparameters for which the resulting series diverges or remains bounded. Neural network training similarly involves iterating an update function (e.g. repeated steps of gradient descent), can result in convergent or divergent behavior, and can be extremely sensitive to small changes in hyperparameters. Motivated by these similarities, we experimentally examine the boundary between neural network hyperparameters that lead to stable and divergent training. We find that this boundary is fractal over more than ten decades of scale in all tested configurations.

Alignment tuning is meant to make harmful-request refusal robust, yet this safety behavior can be erased by a small set of benign fine-tuning examples. This is a deployment risk for open-weight models because a checkpoint can pass refusal tests at release time and later lose refusal under low-cost downstream fine-tuning. Prior work has established these refusal failures, but existing studies do not show how to detect this fragility in the aligned model itself before an attack or fine-tuning intervention is run. We introduce Skin-Deep, a geometric diagnostic that detects alignment fragility directly from the aligned model's hidden-state activations before such an intervention is run and compresses the layer-wise safety geometry into a single scalar, the Geometric Fragility Score (GFS). Applied to twenty-one instruction-tuned models spanning six alignment recipes and 3B--32B parameters, Skin-Deep reveals a recurring low-rank safety subspace across model families. Direction ablations show that removing directions in this subspace weakens harmful-request refusal, providing causal evidence that the recovered geometry underlies refusal behavior. Crucially, GFS identifies, before any fine-tuning, the initially safe model that retains the most refusal after small-scale LoRA fine-tuning. These results establish GFS as a practical pre-deployment diagnostic for flagging fragile refusal behavior without running an attack.

As AI agents move from chat interfaces to systems that read private data, call tools, and execute multi-step workflows, guardrails become a last line of defense against concrete deployment harms. In these settings, guardrail failures are no longer merely answer-quality errors: they can leak secrets, authorize unsafe actions, or block legitimate work. The hardest failures are often contextual: whether an action is acceptable depends on local privacy norms, organizational policies, and user expectations that resist pre-deployment specification. This creates a practical gap: guardrails must adapt to their own operating environments, yet deployment feedback is typically limited to sparse, noisy user-reported failures, and repeated fine-tuning is often impractical. To address this gap, we propose LiSA (Lifelong Safety Adaptation), a conservative policy induction framework that improves a fixed base guardrail through structured memory. LiSA converts occasional failures into reusable policy abstractions so that sparse reports can generalize beyond individual cases, adds conflict-aware local rules to prevent overgeneralization in mixed-label contexts, and applies evidence-aware confidence gating via a posterior lower bound, so that memory reuse scales with accumulated evidence rather than empirical accuracy alone. Across PrivacyLens+, ConFaide+, and AgentHarm, LiSA consistently outperforms strong memory-based baselines under sparse feedback, remains robust under noisy user feedback even at 20% label-flip rates, and pushes the latency--performance frontier beyond backbone model scaling. Ultimately, LiSA offers a practical path to secure AI agents against the unpredictable long tail of real-world edge risks.

When automated decision systems fail, organizations frequently discover that formally compliant governance infrastructure cannot reconstruct what happened or why. This paper synthesizes an operational governance evidence framework -- structural accountability collapse diagnostics, decision trace schemas, evidence sufficiency measurement, and label-free monitoring -- into an integrated chain and analytically assesses its transferability across four decision system architectures. The cross-architecture comparison reveals a governance coverage gradient: deterministic rule engines achieve full DES-property fillability, hybrid ML+rules systems achieve partial fillability, classical ML systems achieve only minimal fillability, and agentic AI systems encounter structural breaks. We introduce the cascade of uncertainty, showing how governance failures propagate through serial dependencies between framework layers. For agentic systems, we identify three structural breaks -- decision diffusion, evidence fragmentation, and responsibility ambiguity -- and propose corresponding analytical extensions. Four propositions formalize the gradient, cascade compounding, delegation-depth effects, and extension sufficiency, establishing boundary conditions for the framework's valid operating envelope.

Long-horizon LLM agents can fail quietly: they settle on one reading of the evidence early, then spend the rest of the run defending it. We call this premature commitment. Final-answer scoring misses the failure mode because it sees only the answer, not whether the process has already collapsed to a stable path. We define representational commitment as cross-run hidden-state convergence at a fixed reasoning step, and use it as an early diagnostic of trajectory consistency. On Llama-3.1-70B running ReAct on HotpotQA, step-4 hidden-state similarity predicts downstream behavioral consistency (r = -0.35, partial r = -0.45), with a localized temporal and layer-wise signature. The signal replicates across Qwen-2.5-72B and Phi-3-14B, and on StrategyQA (r = -0.83). It does not track correctness: committed-wrong and committed-correct questions are not separable in activation similarity. That boundary is central to the claim. Commitment tells us whether an agent has settled, not whether it is right. A runtime monitor detects inconsistent trajectories from hidden states at AUROC up to 0.97 (0.85--0.88 under a stricter split), and a prompting intervention cuts behavioral variance by 28% against a token-matched control while leaving accuracy statistically unchanged. We also test whether the signal can route self-consistency compute; on a harder benchmark it helps only modestly and is matched by a simpler output-based baseline. The result is a diagnostic for a hidden process failure, with clear limits rather than a general accuracy lever.

Safety-aligned language models often refuse prompts that are actually harmless. Current evaluations mostly report global rates such as false rejection or compliance. These scores treat each prompt alone and miss local inconsistency, where a model accepts one phrasing of an intent but rejects a close paraphrase. This gap limits diagnosis and tuning. We introduce "semantic confusion," a failure mode that captures such local inconsistency, and a framework to measure it. We build ParaGuard, a 10k-prompt corpus of controlled paraphrase clusters that hold intent fixed while varying surface form. We then propose three model-agnostic metrics at the token level: Confusion Index, Confusion Rate, and Confusion Depth. These metrics compare each refusal to its nearest accepted neighbors and use token embeddings, next-token probabilities, and perplexity signals. Experiments across diverse model families and deployment guards show that global false-rejection rate hides critical structure. Our metrics reveal globally unstable boundaries in some settings, localized pockets of inconsistency in others, and cases where stricter refusal does not increase inconsistency. We also show how confusion-aware auditing separates how often a system refuses from how sensibly it refuses. This gives developers a practical signal to reduce false refusals while preserving safety.

When a phone-use agent avoids harm, does that show safety, or simply inability to act? Existing evaluations often cannot tell. A harmful outcome may be avoided because the agent recognized the risk and chose the safe action, or because it failed to understand the screen or execute any relevant action at all. These cases have different causes and call for different fixes, yet current benchmarks often merge them under task success, refusal, or final harmful outcome. We address this problem with PhoneSafety, a benchmark of 700 safety-critical moments drawn from real phone interactions across more than 130 apps. Each instance isolates the next decision at a risky moment and asks a simple question: does the model take the safe action, take the unsafe action, or fail to do anything useful? We evaluate eight representative phone-use agents under this framework. Our results reveal two main patterns. First, stronger general phone-use ability does not reliably imply safer choices at risky moments. Models that perform better on ordinary app tasks are not always the ones that behave more safely when the next action matters. Second, failures to do anything useful behave like a capability signal rather than a safety signal: they are concentrated in more visually and operationally demanding settings and remain stable when the evaluation protocol changes. Across models, failures split into two recurring patterns: unsafe choices in settings where the model can act but chooses wrongly, and inability to act in more visually and operationally demanding screens. Overall, a harmless outcome is not enough to count as evidence of safety. Evaluating phone-use agents requires separating unsafe judgment from inability to act.

AI has long assisted scientific research, but the rapid advance of LLMs and agentic scaffolds is reshaping the landscape; a single system can now carry whole-stage research from an initial hypothesis all the way to final published paper, which is a paradigm now referred to as AutoResearch. Existing evaluations reveal little about how these agents operate or where they break down. Tasks are narrowly-scoped, evaluation measures performance but not process, and failure diagnoses lack systematic coverage or artifact-level visibility. To address this gap, we introduce AutoResearchEval, featuring 100 tasks grounded in published frontier science across 7 scientific domains and the full research lifecycle, including ideation, retrieval, execution, analysis, writing, and review. Evaluating 8 harness-model combinations yields 800 autoresearch agent trajectories, with process-level annotation. We organize these insights into AutoResearch Failure Taxonomy or ARFT, a framework of 45 empirically-grounded failure patterns. To enable scalable fine-grained attribution, we leverage a human-calibrated agent-as-a-judge pipeline to inspect complete trajectories and intermediate artifacts. Failure patterns converge on a single overarching limitation, namely that current agents lack a metacognitive loop, which entails the ability to check what they produced against what they found, revise when it does not hold up, and question whether the path they took was sound. The same patterns recur across all 8 harness-model combinations, including the strongest models tested, locating the deficit at the model level rather than in any particular scaffold; whether orchestration-level interventions can close it is an open question this work does not test. We publicly release AutoResearchEval and ARFT to facilitate continued research and development in autonomous scientific discovery.

Existing agent-safety evaluation has focused mainly on externally induced risks. Yet agents may still enter unsafe trajectories under benign conditions. We study this complementary but underexplored setting through the lens of intrinsic risk, where intrinsic failures remain latent, propagate across long-horizon execution, and eventually lead to high-consequence outcomes. To evaluate this setting, we introduce non-attack intrinsic risk auditing and present HINTBench, a benchmark of 629 agent trajectories (523 risky, 106 safe; 33 steps on average) supporting three tasks: risk detection, risk-step localization, and intrinsic failure-type identification. Its annotations are organized under a unified five-constraint taxonomy. Experiments reveal a substantial capability gap: strong LLMs perform well on trajectory-level risk detection, but their performance drops to below 35 Strict-F1 on risk-step localization, while fine-grained failure diagnosis proves even harder. Existing guard models transfer poorly to this setting. These findings establish intrinsic risk auditing as an open challenge for agent safety.

Reliable application of machine learning is of primary importance to the practical deployment of deep learning methods. A fundamental challenge is that models are often unreliable due to overconfidence. In this paper, we estimate a model's reliability by measuring the agreement between its latent space, and the latent space of a foundation model. However, it is challenging to measure the agreement between two different latent spaces due to their incoherence, \eg, arbitrary rotations and different dimensionality. To overcome this incoherence issue, we design a neighborhood agreement measure between latent spaces and find that this agreement is surprisingly well-correlated with the reliability of a model's predictions. Further, we show that fusing neighborhood agreement into a model's predictive confidence in a post-hoc way significantly improves its reliability. Theoretical analysis and extensive experiments on failure detection across various datasets verify the effectiveness of our method on both in-distribution and out-of-distribution settings.

Web-agent benchmarks overwhelmingly measure depth -- pinning one obscure answer behind a chain of constraints -- while breadth, exhaustively enumerating a closed set and filling each item's attributes, is barely evaluated, especially outside English. Breadth is also hard to build: certifying that a gold set is complete and every cell correct is far costlier than checking a single answer. I introduce Ko-WideSearch, a Korean breadth-search benchmark built by an automated synthesize-and-verify pipeline. Each task names a set-parent entity -- a TV season, a dynasty, a league, an administrative region, an election -- and asks for its full membership plus a per-item attribute table, graded by Item-, Column-, and Row-F1. It spans 228 tables over 190 entities and sixteen categories across three difficulty tiers, set by two structural knobs I dial independently -- table width and a 2-D composite key -- so cross-product membership climbs from 0\% to 100\% across the tiers. A single normalization-aware comparator is shared between gold construction and grading, so stable date and count columns are not over-dropped on formatting alone. Across twenty web agents, the failure is consistent: agents recover the set but not the rows (e.g.\ Item-F1 92.8 against Row-F1 53.7), accuracy falls steadily as the knobs harden, and neither more search nor more spend closes the gap. Broken down by cell, the hard part is finding the right value, not formatting it: open-ended free-text cells fail most, while cells with a standard answer such as a date or a name usually come out right.

Reinforcement learning holds great promise for improving robot policies beyond the limits of imitation learning. However, its practical adoption remains bottlenecked by the lack of reliable vision-language reward models that provide dense and informative feedback. Two key challenges remain: acquiring diverse failure data at scale and obtaining fine-grained reward signals beyond sparse trajectory-level success labels. Collecting failure trajectories typically requires laborious human effort, while pseudo-failures constructed by relabeling successful demonstrations fail to capture the diverse physical failure modes that arise during robot execution. Meanwhile, existing reward models often predict sparse binary or trajectory-level rewards, which provide limited guidance for efficient policy optimization. We introduce DenseReward, a dense robotic reward model that addresses both challenges. To train DenseReward, we develop an automated failure data generation pipeline that synthesizes physically realistic failure trajectories in simulation without human labeling, covering diverse failure modes such as collisions, missed grasps, object drops, and recovery behaviors. DenseReward predicts dense frame-level reward scores from visual observations and language instructions, enabling fine-grained estimation of task progress throughout an episode. Experiments show that DenseReward outperforms general-purpose VLMs and existing robotic reward models in dense reward prediction across both simulated and real-world manipulation. We further demonstrate that DenseReward provides effective reward guidance for downstream model predictive control and reinforcement learning. We release the dataset, trained reward models, and evaluation suite to support the development of failure-aware dense reward modeling for robot learning.

Boundary point detection aims to outline the external contour structure of clusters and enhance the inter-cluster discrimination, thus bolstering the performance of the downstream classification and clustering tasks. However, existing boundary point detectors are sensitive to density heterogeneity or cannot identify boundary points in concave structures and high-dimensional manifolds. In this work, we propose a robust and efficient boundary point detection method based on Local Direction Dispersion (LoDD). The core of boundary point detection lies in measuring the difference between boundary points and internal points. It is a common observation that an internal point is surrounded by its neighbors in all directions, while the neighbors of a boundary point tend to be distributed only in a certain directional range. By considering this observation, we adopt density-independent K-Nearest Neighbors (KNN) method to determine neighboring points and design a centrality metric LoDD using the eigenvalues of the covariance matrix to depict the distribution uniformity of KNN. We also develop a grid-structure assumption of data distribution to determine the parameters adaptively. The effectiveness of LoDD is demonstrated on synthetic datasets, real-world benchmarks, and application of training set split for deep learning model and hole detection on point cloud data. The datasets and toolkit are available at: https://github.com/ZPGuiGroupWhu/lodd.

Enterprise large language model (LLM) applications often begin as prototypes whose behavior is carried by prompts and retrieval context. Productization adds requirements for source boundaries, entity routing, answer contracts, and reproducible traces. We present a harness-engineering approach that reconstructs this pattern into a traceable, auditable LLM-agent architecture: deterministic behavior moves into code, manifests, schemas, and validation artifacts around a replaceable composition boundary, while source-backed claims remain the authority for runtime answers. We instantiate it on a public-data slice of five Korean corporate groups (25 listed companies) and evaluate three research questions. (1) The harness preserves its source-grounding, entity-routing, trace, output-hygiene, and recommendation-language contracts across the fixed validation scenarios; a fault-injection control confirms the validators flag deliberately broken contracts. (2) The checks the harness enforces held under model substitution: across three hosted models, they passed on all 270 composition-boundary runs; failures were confined to the model-composed side and were caught and recorded. (3) The code-owned guarantees are load-bearing, not reproducible by prompting alone: holding the model fixed and varying only the enforcement layer, prompt instructions alone let recommendation-language and internal-trace-leakage violations reach the reader, which the harness blocks entirely. A bolt-on external guardrail prevents such violations too but over-refuses, dropping utility to 88/120 where the harness preserves full utility (120/120); in this ablation, only code-owned enforcement preserves both safety and utility. The result is a reusable engineering pattern for turning exploratory prototypes into auditable applications with versioned source, control, and validation artifacts.

Ensuring the safety of LLM-generated content is essential for real-world deployment. Most existing guardrail models formulate moderation as a fixed binary classification task, implicitly assuming a fixed definition of harmfulness. In practice, enforcement strictness - how conservatively harmfulness is defined and enforced - varies across platforms and evolves over time, making binary moderators brittle under shifting requirements. We first introduce FlexBench, a strictness-adaptive LLM moderation benchmark that enables controlled evaluation under multiple strictness regimes. Experiments on FlexBench reveal substantial cross-strictness inconsistency in existing moderators: models that perform well under one regime can degrade substantially under others, limiting their practical usability. To address this, we propose FlexGuard, an LLM-based moderator that outputs a calibrated continuous risk score reflecting risk severity and supports strictness-specific decisions via thresholding. We train FlexGuard via risk-alignment optimization to improve score-severity consistency and provide practical threshold selection strategies to adapt to target strictness at deployment. Experiments on FlexBench and public benchmarks demonstrate that FlexGuard achieves higher moderation accuracy and substantially improved robustness under varying strictness. We release the source code and data to support reproducibility.

We address the problem of understanding when and why Vision-Language-Action models struggle with contact-rich manipulation tasks that require precise physical interaction. Prior work has primarily focused on addressing contact failures through force-augmented architectures and training-time regularizers, yet the root causes of these failures remain underexplored. We identify two distinct failure modes underlying this gap. Precision failures are rooted in a flow-matching policy training mismatch, and force failures arise from the distinctive structure of force signals. We address each failure mode with a targeted mechanism and combine them into FACT, which achieves 66% average success rate across five contact-rich tasks against 41% for the best prior baseline, in an evaluation spanning almost 2,500 real-world rollouts.

Premature closure, or committing to a conclusion before sufficient information is available, is a recognized contributor to diagnostic error but remains underexamined in large language models (LLMs). We define LLM premature closure as inappropriate commitment under uncertainty: providing an answer, recommendation, or clinical guidance when the safer response would be clarification, abstention, escalation, or refusal. We evaluated five frontier LLMs across structured and open-ended medical tasks. In MedQA (n = 500) and AfriMed-QA (n = 490) questions where the correct choice had been removed, models still selected an answer at high rates, with baseline false-action rates of 55-81% and 53-82%, respectively. In open-ended evaluation, models gave inappropriate answers on an average of 30% of 861 HealthBench questions and 78% of 191 physician-authored adversarial queries. Safety-oriented prompting reduced premature closure across models, but residual failure persisted, highlighting the need to evaluate whether medical LLMs know when not to answer.

Existing evaluations often reduce agent failures to system-level outcomes, obscuring where the fault originated and which intervention would improve the agent system. This creates a repair-assignment problem: the same visible failure may call for model post-training, harness engineering, environment redesign, or benchmark repair depending on its source. Because agent behavior emerges from interactions among models, harnesses, users, tools, memory, and environments, outcome-level labels are often insufficient for improvement. Most failure taxonomies do little to resolve this problem because they are benchmark-specific and lack a shared structure. We introduce an interaction-centric taxonomy that localizes failures to the interactions in which they originate and identifies the responsible component. It organizes 41 failure modes by assigning each to an edge between two components and a fault side indicating where the repair belongs. This makes the taxonomy actionable: model-side failures identify targets for post-training, harness-side failures point to scaffolding and tool-integration fixes, and environment or grader failures reveal evaluation conditions requiring redesign. The schema applies across agent architectures, from coding assistants to long-horizon personal assistants and multi-agent systems. We ground the taxonomy in worked examples from public benchmarks, model system cards, published reports, and logged agent trajectories, and evaluate its reproducibility using independent reasoning agents as judges. Across four frontier models, the strongest judge reaches Cohen's κ=0.76 against human category labels, suggesting that the categories capture shared structure rather than annotator-specific preferences.

Planning records define restrictions over geographic areas, but their source documents often provide only indirect spatial evidence rather than machine-readable boundaries. We introduce Plan2Map, a 208-case multimodal benchmark for document-grounded geospatial boundary reconstruction from UK planning records. Given only a source planning document, systems must reconstruct a valid geospatial boundary from notice text, schedules, map plates, map labels, and boundary annotations; the reference GeoJSON is held out for scoring. We propose GeoPlanAgent, a document-grounded, geospatial-tool-in-the-loop system that decomposes the task into evidence extraction, localisation, map registration, boundary segmentation, projection, and verification. On Plan2Map, GeoPlanAgent achieves 0.736 mean IoU and 0.904 median IoU, with 67.8\% of predictions at or above 0.8 IoU, substantially outperforming direct VLM-to-GeoJSON baselines. Diagnostic analysis shows that direct VLM prediction remains unreliable, while remaining errors are concentrated in localisation and map registration, and supervised boundary segmentation substantially improves pixel-level mask quality. Plan2Map provides a concrete testbed for multimodal geospatial reconstruction from public planning records. Project page: https://odeb1.github.io/Plan2Map_Project_Page/.

A self-evolving agent retires its bad skills by watching them fail, so what happens when the judge cannot see the failures? Skill retirement is the structural constraint that keeps a growing library from drifting below the no-skill baseline, but its guarantee assumes an unbiased reward, which is false for the LLM judges that reference-free tasks force upon us. We show that a biased judge does not merely add noise; it silently switches off the curator. We make this precise with a corrupted-reward analysis and, isolating the causal channel by injecting corruption on top of a deterministic reward, a behavioral study on a reference-free report-writing testbed with a code-generation cross-check. Symmetric noise leaves retirement intact, but false-pass bias (failures slipping through as passes) disables contribution-based retirement past a sharp threshold that no amount of data can cross. Separating genuine retirement from cap-eviction churn shows this mechanism failure is universal, holding across domains and failure rates and sparing only near-zero-false-pass, verifier-like graders. The downstream outcome, though, is regime-dependent: eval quality degrades only where the same corruption also starves skill synthesis, and otherwise holds steady, so the disabled curator is silent, surfacing in no aggregate metric. The contribution is a behavioral safety result, not a performance one. A cheap defect-injection audit then tells an operator, before deployment, which side of the threshold their judge occupies.

Large reasoning models (LRMs) with multi-step reasoning capabilities have shown remarkable problem-solving abilities, yet they exhibit concerning safety vulnerabilities that remain poorly understood. In this work, we investigate why safety alignment fails in reasoning models through a mechanistic interpretability lens. Using a linear probing approach to trace refusal intentions across token positions, we discover a striking phenomenon termed as refusal cliff: many poorly-aligned reasoning models correctly identify harmful prompts and maintain strong refusal intentions during their thinking process, but experience a sharp drop in refusal scores at the final tokens before output generation. This suggests that these models are not inherently unsafe; rather, their refusal intentions are systematically suppressed. Through causal intervention analysis, we identify a sparse set of attention heads that negatively contribute to refusal behavior. Ablating just 3\% of these heads can reduce attack success rates below 10\%. Building on these mechanistic insights, we propose Cliff-as-a-Judge, a novel data selection method that identifies training examples exhibiting the largest refusal cliff to efficiently repair reasoning models' safety alignment. This approach achieves comparable safety improvements using only 1.7\% of the vanilla safety training data, demonstrating a less-is-more effect in safety alignment.

Biosecurity evaluations of language models typically ask whether models produce hazardous output. This paper asks a complementary question: when a model refuses, is that refusal structurally sound, or does it disappear under modest changes to prompt framing, formatting, or output length? Across five architectures, no model cleanly discriminated benign from hazard. Gemma 2 2B-IT never genuinely refused across 75 prompts, hedging on every hazard-adjacent query. Gemma 4 E2B-IT refused 65/75 prompts with chat-template formatting and 0/75 without it. Both Gemma models collapsed to 0% under an 80-token cap. Qwen 2.5 1.5B and Phi-3-mini over-refused, flagging 83-87% of benign biology as hazardous. Llama 3.2 1B showed the only meaningful tier gradient (61-point spread). To probe what drives such over-refusal, we tested a panel of Schedule I but biologically non-toxic compounds (notably psilocybin cultivation, with FDA Breakthrough Therapy status). Some models refused these at rates exceeding genuinely hazardous biology, suggesting refusal tracks legality and cultural salience over CBRN hazard. To measure the internal side, we introduce a divergence score D comparing a model's surface response label to its internal sparse autoencoder (SAE) feature activations. Full D was computed on Gemma 2 2B-IT (Gemma Scope 1) and Gemma 4 E2B-IT (author-trained bio SAE). Two fine-tuned Gemma 2 domain SAEs were released. On Gemma 4, comply and refuse responses separated by a 0.647-point gap with zero overlap (n=75), though this is preliminary, with a narrow catalog, within-sample calibration, and Gemma-family-only SAE coverage. Built over one hackathon weekend on consumer hardware (GTX 1650 Ti Max-Q, plus Colab T4 for SAE training), this preliminary evidence suggests activation-level auditing may surface failure modes invisible to behavioral evaluation, with substantial variation across architectures.

Multi-Agent Reinforcement Learning (MARL) is increasingly deployed in safety-critical domains, yet methods for interpretable failure detection and attribution remain underdeveloped. We introduce a two-stage gradient-based framework that provides interpretable diagnostics for three critical failure analysis tasks: (1) detecting the true initial failure source (Patient-0); (2) validating why non-attacked agents may be flagged first due to domino effects; and (3) tracing how failures propagate through learned coordination pathways. Stage 1 performs interpretable per-agent failure detection via Taylor-remainder analysis of policy-gradient costs, declaring an initial Patient-0 candidate at the first threshold crossing. Stage 2 provides validation through geometric analysis of critic derivatives-first-order sensitivity and directional second-order curvature aggregated over causal windows to construct interpretable contagion graphs. This approach explains "downstream-first" detection anomalies by revealing pathways that amplify upstream deviations. Evaluated across 500 episodes in Simple Spread (3 and 5 agents) and 100 episodes in StarCraft II using MADDPG and HATRPO, our method achieves 88.2-99.4% Patient-0 detection accuracy while providing interpretable geometric evidence for detection decisions. By moving beyond black-box detection to interpretable gradient-level forensics, this framework offers practical tools for diagnosing cascading failures in safety-critical MARL systems.

Autonomous vehicles drive millions of miles on the road each year. Under such circumstances, deployed machine learning models are prone to failure both in seemingly normal situations and in the presence of outliers. However, in the training phase, they are only evaluated on small validation and test sets, which are unable to reveal model failures due to their limited scenario coverage. While it is difficult and expensive to acquire large and representative labeled datasets for evaluation, large-scale unlabeled datasets are typically available. In this work, we introduce label-free model failure detection for lidar-based point cloud segmentation, taking advantage of the abundance of unlabeled data available. We leverage different data characteristics by training a supervised and self-supervised stream for the same task to detect failure modes. We perform a large-scale qualitative analysis and present LidarCODA, the first publicly available dataset with labeled anomalies in real-world lidar data, for an extensive quantitative analysis.

Consider a random uniform sample of n points in a compact region A of Euclidean d-space, d geq 2, with a smooth or (when d=2) polygonal boundary. Fix k bf N. Let T_{n,k} be the threshold r at which the geometric graph on these n vertices with distance parameter r becomes k-connected. We show that if d=2 then n (pi/|A|) T_{n,1}^2 - log n is asymptotically standard Gumbel. For (d,k) neq (2,1), it is n (theta_d/|A|) T_{n,k}^d - (2-2/d) log n - (4-2k-2/d) log log n that converges in distribution to a nondegenerate limit, where theta_d is the volume of the unit ball. The limit is Gumbel with scale parameter 2 except when (d,k)=(2,2) where the limit is two component extreme value distributed. The different cases reflect the fact that boundary effects are more more important in some cases than others. We also give similar results for the largest k-nearest neighbour link U_{n,k} in the sample, and show T_{n,k}=U_{n,k} with high probability. We provide estimates on rates of convergence and give similar results for Poisson samples in A. Finally, we give similar results even for non-uniform samples, with a less explicit sequence of centring constants.

Despite growing enthusiasm for Multi-Agent Systems (MAS), where multiple LLM agents collaborate to accomplish tasks, their performance gains across popular benchmarks remain minimal compared to single-agent frameworks. This gap highlights the need to analyze the challenges hindering MAS effectiveness. In this paper, we present the first comprehensive study of MAS challenges. We analyze five popular MAS frameworks across over 150 tasks, involving six expert human annotators. We identify 14 unique failure modes and propose a comprehensive taxonomy applicable to various MAS frameworks. This taxonomy emerges iteratively from agreements among three expert annotators per study, achieving a Cohen's Kappa score of 0.88. These fine-grained failure modes are organized into 3 categories, (i) specification and system design failures, (ii) inter-agent misalignment, and (iii) task verification and termination. To support scalable evaluation, we integrate MASFT with LLM-as-a-Judge. We also explore if identified failures could be easily prevented by proposing two interventions: improved specification of agent roles and enhanced orchestration strategies. Our findings reveal that identified failures require more complex solutions, highlighting a clear roadmap for future research. We open-source our dataset and LLM annotator.

The presence of linear paths in parameter space between two different network solutions in certain cases, i.e., linear mode connectivity (LMC), has garnered interest from both theoretical and practical fronts. There has been significant research that either practically designs algorithms catered for connecting networks by adjusting for the permutation symmetries as well as some others that more theoretically construct paths through which networks can be connected. Yet, the core reasons for the occurrence of LMC, when in fact it does occur, in the highly non-convex loss landscapes of neural networks are far from clear. In this work, we take a step towards understanding it by providing a model of how the loss landscape needs to behave topographically for LMC (or the lack thereof) to manifest. Concretely, we present a `mountainside and ridge' perspective that helps to neatly tie together different geometric features that can be spotted in the loss landscape along the training runs. We also complement this perspective by providing a theoretical analysis of the barrier height, for which we provide empirical support, and which additionally extends as a faithful predictor of layer-wise LMC. We close with a toy example that provides further intuition on how barriers arise in the first place, all in all, showcasing the larger aim of the work -- to provide a working model of the landscape and its topography for the occurrence of LMC.

Agentic search enables LLMs to solve complex multi-hop questions through iterative reasoning and external search. Despite the effectiveness, these systems often suffer from a critical limitation in practice: agents fail to recognize their own knowledge boundaries, blindly triggering searches when internal knowledge suffices and failing to terminate search even when adequate evidence has been collected. The lack of self-awareness leads to severe over-search, incurring substantial inference latency and prohibitive computational cost. To this end, we propose SAAS, a novel RL framework designed to cultivate dynamic self-awareness that precisely regulates search behavior without compromising accuracy. SAAS introduces three key components: (i) a search boundary modeling mechanism, which identifies the search boundary under the evolving policy by contrasting search-disabled and search-enabled rollouts; (ii) a boundary-aware reward module, which translates this boundary awareness into trajectory-level penalties, suppressing unnecessary and redundant searches; and (iii) a stage-wise optimization strategy, which leverages a sequential curriculum to prioritize reasoning over search regularization, thereby avoiding reward hacking. Extensive experiments demonstrate that SAAS substantially reduces over-search, while maintaining accuracy. Our code is anonymously released at https://github.com/XMUDeepLIT/SAAS.

Self-driving laboratories increasingly rely on low-cost liquid handlers such as the Opentrons OT-2, which ship without the pressure-based aspiration monitoring of Hamilton or Tecan systems and are typically run open-loop. Two failure modes go undetected: protocols that are syntactically valid but violate assay-specific invariants (e.g., tip reuse between a PCR template and a no-template control), and physical execution failures (partial dispense, air bubbles, missing tips) at runtime. We present AEGIS, a two-layer guardian for both. Layer 1 pairs a curated machine-readable assay rule database with an LLM that reasons over OT-2 Python code, reaching an adjusted F1 of 0.97 on a 24-protocol benchmark across five assay families and beating rules-only and LLM-only ablations across five backends; a free open-weight model ties the best proprietary one, so no paid API is required. Layer 2 fits a PCA world model to YOLO-cropped four-frame pipette trajectories; under a leakage-free leave-one-plate-out evaluation it reaches average precision 0.89 and operating-point F1 0.71 (AUROC 0.80), a deployment-faithful number that matches the live demonstration, and we characterize the small-pipette (p20) resolution limit (F1 0.47). A live demonstration on a physical OT-2 (five replicates per condition) catches planted no-tip failures deterministically and partial dispense on coloured dyes, with an always-VLM self-vote gate lifting partial-dispense recall to 5/5; transparent water is a principled limit of any front-view-only monitor, which AEGIS surfaces as low-confidence VLM reasoning rather than a wrong verdict. Cascade triage holds VLM cost near 1.63 per plate versus 10.33 for an always-VLM baseline. AEGIS is open source and, to our knowledge, the first system to unify pre-flight assay-aware validation with runtime visual monitoring for an open-source liquid handler.

AI systems can fail silently. The failure propagates through training loops, evaluation pipelines, and production monitoring stacks until downstream harm makes it visible. This paper introduces evaluation blindness: a measurement function M exhibits evaluation blindness with respect to failure class F when it produces readings indistinguishable from a healthy state while the system is actually failing, with no auxiliary signal flagging the gap. The problem surfaces at two lifecycle stages the literature has treated separately. At training time, reward models are gamed, importance-sampling corrections are silently miscalculated, and benchmark contamination inflates fine-tuning evaluations, all while loss curves look healthy and gradient updates proceed normally. At deployment time, monitoring fails to catch six classes of production failure, including an Operational category that is 100% silent by structural definition. We provide a formal detectability predicate unifying both stages. Four training-time case studies trace concrete breakdowns, including a real implementation bug in TRL PR #6594 where gradients are corrupted as loss decreases normally. A six-class taxonomy validated against 50 real-world incidents from court documents and regulatory filings finds that 53% of verifiable public failures were silent. A failure budget framework ties acceptable failure rates to use-case risk class. The implication is direct: measurement infrastructure is a correctness concern across the full AI lifecycle, not just at evaluation time. Data, code, and taxonomy schema are at https://github.com/priyanka25aug/llm-failure-taxonomy.

A robot's flash endurance is a non-renewable stock: every persisted write spends one of a few thousand program/erase cycles and never refills, yet no fielded robot memory system prices which memories are worth an erase cycle. We treat embodied memory as depreciating capital and price that stock with a single endurance shadow price η, which makes cost-minimizing placement across a RAM / on-board NVM / cloud hierarchy a threshold in a wear-augmented per-byte index. The index is cost-optimal whatever the sign of the value-write association χ; only when χ> 0 does the optimum turn non-monotone, sending a robot's most valuable memories off its flash. The pivot is thus empirical, and we measure χ on real robot logs at a pre-specified gate: its sign is a property of the deployment regime -- positive on recurrent long-horizon manipulation (hatχ approx +1.0 times 10^{-3}, replicated at full power), null on a shorter-horizon suite, and negative on non-recurrent teleoperation. Two boundaries scope the result. The endurance budget is dormant on premium 3,000-P/E TLC at datasheet prices and binding on the commodity QLC/eMMC (sim1,000 P/E) that cheaper edge robots run. And where it binds, a learned wear-aware controller only ties price-based routing on task value, because realized value is tier-invariant across RAM, NVM, and cloud: the rent governs device lifetime and cost, not task performance. Whether wear-aware placement improves task value remains open -- χ is measured against a value proxy, and the non-monotone optimum, while proven, is not yet observed in data.

We report a case study of four end-to-end attempts to autonomously generate ML research papers using a pipeline of six LLM agents mapped to stages of the scientific workflow. Of these four, three attempts failed during implementation or evaluation. One completed the pipeline and was accepted to Agents4Science 2025, an experimental inaugural venue that required AI systems as first authors, passing both human and multi-AI review. From these attempts, we document six recurring failure modes: bias toward training data defaults, implementation drift under execution pressure, memory and context degradation across long-horizon tasks, overexcitement that declares success despite obvious failures, insufficient domain intelligence, and weak scientific taste in experimental design. We conclude by discussing four design principles for more robust AI-scientist systems, implications for autonomous scientific discovery, and we release all prompts, artifacts, and outputs at https://github.com/Lossfunk/ai-scientist-artefacts-v1

AI systems fail silently far more often than they fail visibly. In an analysis of 100K human-AI interactions from the WildChat dataset, we find that 79% of AI failures are invisible: something went wrong but the user gave no overt indication that there was a problem. These invisible failures cluster into eight archetypes that help us characterize where and how AI systems are failing to meet users' needs. In addition, the archetypes show systematic co-occurrence patterns indicating higher-level failure types. To address the question of whether these archetypes will remain relevant as AI systems become more capable, we also created and annotated a counterfactual dataset in which WildChat's 2024-era responses are replaced by those from three present-day frontier LMs. This analysis indicates that failure rates have dropped substantially, but that the vast majority of failures remain invisible in our sense, and the distribution of failure archetypes seems stable. Finally, we illustrate how the archetypes help us to identify systematic and variable AI limitations across different usage domains. Overall, we argue that our invisible failure taxonomy can be a key component in reliable failure monitoring for product developers, scientists, and policy makers. Our code and data are available at https://github.com/bigspinai/bigspin-invisible-failure-archetypes

Floods are among the most destructive natural hazards, and their increasing frequency under climate change makes satellite-based inundation mapping essential for disaster response. Geospatial foundation models pretrained on satellite archives offer geographic transferability, but their operational reliability across diverse, unseen events remains uncharacterized. Here we deploy Prithvi-EO-2.0 across 19 out-of-distribution flood events (2017-2025) spanning six continents, eight climate zones, and six flood mechanisms, validating against two independent reference products. Detection accuracy depended jointly on land cover and flood type, with cropland yielding the highest agreement (IoU=52%) and riverine events the strongest detection (F1=0.69), while tree cover and built-up areas showed near-zero detection (IoU=4%) regardless of flood mechanism. Dual-reference validation revealed that apparent model error partly reflects definitional inconsistency between reference products rather than detection failure. Iterative pipeline testing identified 23 failure modes, with pipeline engineering dominating initial error over model capacity. These findings establish environment-dependent detection boundaries for operational satellite flood mapping.

While vision-language-action models (VLAs) have shown promising robotic behaviors across a diverse set of manipulation tasks, they achieve limited success rates when deployed on novel tasks out-of-the-box. To allow these policies to safely interact with their environments, we need a failure detector that gives a timely alert such that the robot can stop, backtrack, or ask for help. However, existing failure detectors are trained and tested only on one or a few specific tasks, while VLAs require the detector to generalize and detect failures also in unseen tasks and novel environments. In this paper, we introduce the multitask failure detection problem and propose SAFE, a failure detector for generalist robot policies such as VLAs. We analyze the VLA feature space and find that VLAs have sufficient high-level knowledge about task success and failure, which is generic across different tasks. Based on this insight, we design SAFE to learn from VLA internal features and predict a single scalar indicating the likelihood of task failure. SAFE is trained on both successful and failed rollouts, and is evaluated on unseen tasks. SAFE is compatible with different policy architectures. We test it on OpenVLA, pi_0, and pi_0-FAST in both simulated and real-world environments extensively. We compare SAFE with diverse baselines and show that SAFE achieves state-of-the-art failure detection performance and the best trade-off between accuracy and detection time using conformal prediction. More qualitative results can be found at https://vla-safe.github.io/.

Modern web dashboards and enterprise applications increasingly rely on complex, distributed microservices architectures. While these architectures offer scalability, they introduce significant challenges in debugging and observability. When failures occur, they often manifest as opaque error messages to the end-user such as Something went wrong. This masks the underlying root cause which may reside in browser side exceptions, API contract violations, or server side logic failures. Existing monitoring tools capture these events in isolation but fail to correlate them effectively or provide intelligible explanations to non technical users. This paper proposes a novel system for Automated Multi Source Debugging and Natural Language Error Explanation. The proposed framework automatically collects and correlates error data from disparate sources such as browser, API, server logs and validates API contracts in real time, and utilizes Large Language Models to generate natural language explanations. This approach significantly reduces Mean Time to Resolution for support engineers and improves the user experience by transforming cryptic error codes into actionable insights.

Agentic reinforcement learning (RL) has proven effective for training LLM-based agents with external tool-use capabilities. However, we identify that agentic RL training induces increasing redundant tool calls and blurs the model's intrinsic knowledge boundary, where the model fails to distinguish when tools are needed versus when parametric knowledge suffices. Existing solutions based on reward shaping create coarse-grained optimization targets that tend to incentivize indiscriminate tool-call suppression, leading to reward hacking. In this paper, we propose AKBE (Agentic Knowledge Boundary Enhancement), an on-policy method that dynamically probes the model's intrinsic knowledge boundary through dual-path (with-tool and no-tool) rollouts during training. We define the knowledge boundary as the per-instance determination of whether tools are required and the minimum tool calls necessary. By comparing correctness across paths, AKBE categorizes trajectories and constructs targeted supervisory signals that guide efficient tool-use patterns for each question. These signals are integrated seamlessly into the agentic RL training loop. Experiments on seven QA benchmarks demonstrate that AKBE improves task accuracy by +1.85 on average and reduces tool calls by 18% over standard agentic RL, yielding 25% higher tool productivity without any accuracy-efficiency trade-off. Further analysis suggests its plug-and-play compatibility across different RL algorithms and the mechanism of each signal category. Our code is available at https://github.com/CuSO4-Chen/AKBE.

We study the robustness of classifiers to various kinds of random noise models. In particular, we consider noise drawn uniformly from the ell_p ball for p in [1, infty] and Gaussian noise with an arbitrary covariance matrix. We characterize this robustness to random noise in terms of the distance to the decision boundary of the classifier. This analysis applies to linear classifiers as well as classifiers with locally approximately flat decision boundaries, a condition which is satisfied by state-of-the-art deep neural networks. The predicted robustness is verified experimentally.

We present an open-source benchmark and evaluation framework for assessing emotional boundary handling in Large Language Models (LLMs). Using a dataset of 1156 prompts across six languages, we evaluated three leading LLMs (GPT-4o, Claude-3.5 Sonnet, and Mistral-large) on their ability to maintain appropriate emotional boundaries through pattern-matched response analysis. Our framework quantifies responses across seven key patterns: direct refusal, apology, explanation, deflection, acknowledgment, boundary setting, and emotional awareness. Results demonstrate significant variation in boundary-handling approaches, with Claude-3.5 achieving the highest overall score (8.69/10) and producing longer, more nuanced responses (86.51 words on average). We identified a substantial performance gap between English (average score 25.62) and non-English interactions (< 0.22), with English responses showing markedly higher refusal rates (43.20% vs. < 1% for non-English). Pattern analysis revealed model-specific strategies, such as Mistral's preference for deflection (4.2%) and consistently low empathy scores across all models (< 0.06). Limitations include potential oversimplification through pattern matching, lack of contextual understanding in response analysis, and binary classification of complex emotional responses. Future work should explore more nuanced scoring methods, expand language coverage, and investigate cultural variations in emotional boundary expectations. Our benchmark and methodology provide a foundation for systematic evaluation of LLM emotional intelligence and boundary-setting capabilities.

Modern automobiles have evolved from just being mechanical machines to having full-fledged electronics systems that enhance vehicle dynamics and driver experience. However, these complex hardware and software systems, if not properly designed, can experience failures that can compromise the safety of the vehicle, its occupants, and the surrounding environment. For example, a system to activate the brakes to avoid a collision saves lives when it functions properly, but could lead to tragic outcomes if the brakes were applied in a way that's inconsistent with the design. Broadly speaking, the analysis performed to minimize such risks falls into a systems engineering domain called Functional Safety. In this paper, we present SafetyLens, a visual data analysis tool to assist engineers and analysts in analyzing automotive Functional Safety datasets. SafetyLens combines techniques including network exploration and visual comparison to help analysts perform domain-specific tasks. This paper presents the design study with domain experts that resulted in the design guidelines, the tool, and user feedback.

There is no doubt that safety alignment is an essential step in LLM training. However, conceptually it does not distinguish between various domains and the level of potential harm of a query, which creates significant complications in the fields like cyber security, where a model should not be constrained by its safety circuits to accomplish the goals of legitimate, authorized operations. In this work, we share our findings from a large scale abliteration experiment on 24 open-source LLMs and show that domain-specific abliteration is achievable with standard methodology on the example of a 1T-parameter Kimi K2. Building on recent work showing that refusal in LLMs occupies a multi-dimensional subspace within layers, we find that it is also distributed widely across layers, especially in trillion-parameter MoE architectures, and so we aim to capture the part of it that represents harmful concepts in the cybersecurity domain exclusively. We also investigate the correlation between models' features and the effect of domain-specific abliteration, identifying that the type of safety training and architecture are the most reliable predictors. Finally, we classify the models into 3 abliteration susceptibility tiers and put forward a set of conjectures as to why a particular effect from this intervention might be observed in a given model.

Deployed multimodal systems can fail in ways that evaluators did not anticipate. In order to find these failures before deployment, we introduce MultiMon, a system that automatically identifies systematic failures -- generalizable, natural-language descriptions of patterns of model failures. To uncover systematic failures, MultiMon scrapes a corpus for examples of erroneous agreement: inputs that produce the same output, but should not. It then prompts a language model (e.g., GPT-4) to find systematic patterns of failure and describe them in natural language. We use MultiMon to find 14 systematic failures (e.g., "ignores quantifiers") of the CLIP text-encoder, each comprising hundreds of distinct inputs (e.g., "a shelf with a few/many books"). Because CLIP is the backbone for most state-of-the-art multimodal systems, these inputs produce failures in Midjourney 5.1, DALL-E, VideoFusion, and others. MultiMon can also steer towards failures relevant to specific use cases, such as self-driving cars. We see MultiMon as a step towards evaluation that autonomously explores the long tail of potential system failures. Code for MULTIMON is available at https://github.com/tsb0601/MultiMon.

Agentic LLM coding tools compress long session histories into compaction summaries that subsequent sessions inherit as ground truth. This paper documents a failure mode in Claude Code where partial standard output from timed-out commands (exit code 143) is recorded in compaction summaries as confirmed results, propagating false positives across sessions and model versions without re-verification. The underlying mechanism is a conflation of observation and persistence, where information that appeared in the terminal is treated as equivalent to information written to durable storage. This finding extends the analysis of LLM self-evaluation failures reported in prior work on non-determinism in LLM-as-judge grading by showing that agentic tools exhibit analogous reliability deficits when reporting on their own operational outcomes. The failure has direct implications for any workflow that relies on agentic session continuity for data processing, scientific computation, or multi-step automation.

With the rapid evolution of foundation models, Large Language Model (LLM) agents have demonstrated increasingly powerful tool-use capabilities. However, this proficiency introduces significant security risks, as malicious actors can manipulate agents into executing tools to generate harmful content. While existing defensive mechanisms are effective, they frequently suffer from the over-refusal problem, where increased safety strictness compromises the agent's utility on benign tasks. To mitigate this trade-off, we propose SafeHarbor, a novel framework designed to establish precise decision boundaries for LLM agents. Unlike static guidelines, SafeHarbor extracts context-aware defense rules through enhanced adversarial generation. We design a local hierarchical memory system for dynamic rule injection, offering a training-free, efficient, and plug-and-play solution. Furthermore, we introduce an information entropy-based self-evolution mechanism that continuously optimizes the memory structure through dynamic node splitting and merging. Extensive experiments demonstrate that SafeHarbor achieves state-of-the-art performance on both ambiguous benign tasks and explicit malicious attacks, notably attaining a peak benign utility of 63.6\% on GPT-4o while maintaining a robust refusal rate exceeding 93\% against harmful requests. The source code is publicly available at https://github.com/ljj-cyber/SafeHarbor.

We introduce FailureSensorIQ, a novel Multi-Choice Question-Answering (MCQA) benchmarking system designed to assess the ability of Large Language Models (LLMs) to reason and understand complex, domain-specific scenarios in Industry 4.0. Unlike traditional QA benchmarks, our system focuses on multiple aspects of reasoning through failure modes, sensor data, and the relationships between them across various industrial assets. Through this work, we envision a paradigm shift where modeling decisions are not only data-driven using statistical tools like correlation analysis and significance tests, but also domain-driven by specialized LLMs which can reason about the key contributors and useful patterns that can be captured with feature engineering. We evaluate the Industrial knowledge of over a dozen LLMs-including GPT-4, Llama, and Mistral-on FailureSensorIQ from different lens using Perturbation-Uncertainty-Complexity analysis, Expert Evaluation study, Asset-Specific Knowledge Gap analysis, ReAct agent using external knowledge-bases. Even though closed-source models with strong reasoning capabilities approach expert-level performance, the comprehensive benchmark reveals a significant drop in performance that is fragile to perturbations, distractions, and inherent knowledge gaps in the models. We also provide a real-world case study of how LLMs can drive the modeling decisions on 3 different failure prediction datasets related to various assets. We release: (a) expert-curated MCQA for various industrial assets, (b) FailureSensorIQ benchmark and Hugging Face leaderboard based on MCQA built from non-textual data found in ISO documents, and (c) LLMFeatureSelector, an LLM-based feature selection scikit-learn pipeline. The software is available at https://github.com/IBM/FailureSensorIQ.

Autonomous coding agents built on large language models (LLMs) are rapidly being integrated into development workflows, yet their operational safety properties remain poorly understood beyond evaluations of explicitly malicious inputs. In practice, high-impact failures arise during benign, goal-directed use through environment breakage, fabricated success reports, etc. that current benchmarks do not capture. What categories of operational safety failures actually occur when coding agents are used for everyday development tasks and what is their impact? We present an incident-driven empirical study grounded in two complementary evidence streams. We screen 68,816 papers from 22 premier venues, curating 185 safety-relevant studies, and mine 16,586 GitHub issues from widely deployed LLM-powered coding tools, manually confirming 547 genuine safety failures. Applying systematic open coding over both corpora, we derive a multi-dimensional safety taxonomy of 33 operational risk types organized across seven dimensions, and annotate each incident with contributing factors, task context, severity, and downstream impact. Our findings show that coding-agent failures are often severe, with 326 of 547 incidents rated high or critical. The dominant risks are constraint violations, destructive operations, authorization bypasses, and deception, and over 65% of incidents arise in bug fixing and setup or configuration, patterns largely missing from prior literature. These results have direct implications for SE tool designers and benchmark developers: guardrails must go beyond adversarial-prompt defenses to enforce environmental constraints, failure transparency, and safe-halt behaviors.

In recent years, substantial advancements have been made in the development of large language models, achieving remarkable performance across diverse tasks. To evaluate the knowledge ability of language models, previous studies have proposed lots of benchmarks based on question-answering pairs. We argue that it is not reliable and comprehensive to evaluate language models with a fixed question or limited paraphrases as the query, since language models are sensitive to prompt. Therefore, we introduce a novel concept named knowledge boundary to encompass both prompt-agnostic and prompt-sensitive knowledge within language models. Knowledge boundary avoids prompt sensitivity in language model evaluations, rendering them more dependable and robust. To explore the knowledge boundary for a given model, we propose projected gradient descent method with semantic constraints, a new algorithm designed to identify the optimal prompt for each piece of knowledge. Experiments demonstrate a superior performance of our algorithm in computing the knowledge boundary compared to existing methods. Furthermore, we evaluate the ability of multiple language models in several domains with knowledge boundary.

As LLM agents take on offensive security work, a single out-of-scope tool call can breach a client's engagement boundary, disrupt production, or void a bug-bounty finding. Unlike a fixed safety policy, the boundary that matters is declared in the user's request and must be inferred from intent. That challenge is sharpened by the adversarial nature of offensive security: the same tool call is in or out of scope depending not on the action itself but on the target it touches and the context in which it runs, which no fixed policy can enumerate in advance. We study pre-execution gating: a cheap, trusted LLM judge inspects each call proposed by a strong, swappable agent, and accepts or rejects it before it runs. We introduce ScopeJudge, a benchmark of 4,897 tool calls (7.7% scope violations) from agent trajectories on tasks engineered to tempt agents out of scope and labeled at the call level by professional penetration testers, with substantial inter-grader agreement (Fleiss kappa = 0.64) that sets an expert agreement reference point of F1 = 0.78. We evaluate eight judge models under five transcript strategies, varying how much context the judge sees, from the static policy alone to the full raw transcript, and chart the resulting cost-accuracy Pareto frontier. We find that a static policy is structurally insufficient for scope enforcement: blind to the user's request, judge recall collapses to near zero, confirming that scope lives in the request and that request-conditioned monitoring is necessary. Because a missed violation costs more than a spurious rejection, we report precision, recall, and F1 separately and recommend two operating points: a cost-sensitive configuration and a recall-first one for high-stakes deployments. We release the ScopeJudge dataset to support real-time monitoring and scalable oversight of autonomous security agents.

As large language models (LLMs) evolve into autonomous agents that execute long-horizon workflows, invoking a high-capability model at every step becomes economically unsustainable. While model routing is effective for single-turn queries, agentic routing is a sequential, path-dependent problem: early mistakes compound, feedback is often at the end of the episode, and deployments often demand strict per-task spending limits. We propose Budget-Aware Agentic Routing, which selects between a cheap and an expensive model at each step to optimize the cost--success frontier and to operate under strict per-task budgets. We propose Boundary-Guided Training, which leverages two boundary policies (always-small vs.\ always-large) to build a difficulty taxonomy and to anchor learning under sparse rewards. Our approach warms start with boundary-guided SFT data synthesis via stratified sampling of cost-efficient trajectories, then applies Boundary-Guided Policy Optimization (BoPO), combining boundary-relative rewards with a reference-guided advantage to avoid degenerate cheap-failure solutions. Experiment results show that our method improves the efficiency frontier, matching strong routing baselines at substantially lower cost while demonstrating generalization to strict inference-time budget constraints. Overall, our work establishes a foundational framework for agentic routing, shifting the paradigm from static model selection to dynamic, budget-aware sequential decision-making.

Imitation learning (IL) policies in robotics deliver strong performance in controlled settings but remain brittle in real-world deployments: rare events such as hardware faults, defective parts, unexpected human actions, or any state that lies outside the training distribution can lead to failed executions. Vision-based Anomaly Detection (AD) methods emerged as an appropriate solution to detect these anomalous failure states but do not distinguish failures from benign deviations. We introduce FIDeL (Failure Identification in Demonstration Learning), a policy-independent failure detection module. Leveraging recent AD methods, FIDeL builds a compact representation of nominal demonstrations and aligns incoming observations via optimal transport matching to produce anomaly scores and heatmaps. Spatio-temporal thresholds are derived with an extension of conformal prediction, and a Vision-Language Model (VLM) performs semantic filtering to discriminate benign anomalies from genuine failures. We also introduce BotFails, a multimodal dataset of real-world tasks for failure detection in robotics. FIDeL consistently outperforms state-of-the-art baselines, yielding +5.30% percent AUROC in anomaly detection and +17.38% percent failure-detection accuracy on BotFails compared to existing methods.

The rapid development in large language models (LLMs) has transformed the landscape of natural language processing and understanding (NLP/NLU), offering significant benefits across various domains. However, when applied to scientific research, these powerful models exhibit critical failure modes related to scientific integrity and trustworthiness. Existing general-purpose LLM guardrails are insufficient to address these unique challenges in the scientific domain. We provide comprehensive guidelines for deploying LLM guardrails in the scientific domain. We identify specific challenges -- including time sensitivity, knowledge contextualization, conflict resolution, and intellectual property concerns -- and propose a guideline framework for the guardrails that can align with scientific needs. These guardrail dimensions include trustworthiness, ethics & bias, safety, and legal aspects. We also outline in detail the implementation strategies that employ white-box, black-box, and gray-box methodologies that can be enforced within scientific contexts.

Deploying guardrails for custom policies remains challenging, as generic safety models fail to capture task-specific requirements, while prompting LLMs suffers from inconsistent boundary-case performance and high inference costs. Training custom classifiers achieves both accuracy and efficiency, yet demands substantial labeled data that is costly to obtain. We present BARRED (Boundary Alignment Refinement through REflection and Debate), a framework for generating faithful and diverse synthetic training data using only a task description and a small set of unlabeled examples. Our approach decomposes the domain space into dimensions to ensure comprehensive coverage, and employs multi-agent debate to verify label correctness, yielding a high-fidelity training corpus. Experiments across diverse custom policies demonstrate that small language models finetuned on our synthetic data consistently outperform state-of-the-art proprietary LLMs (including reasoning models) and dedicated guardrail models. Ablation studies confirm that both dimension decomposition and debate-based verification are critical for ensuring the diversity and label fidelity required for effective fine-tuning. The BARRED framework eliminates the reliance on extensive human annotation, offering a scalable solution for accurate custom guardrails.

The accelerating deployment of artificial intelligence systems across regulated sectors has exposed critical fragmentation in risk assessment methodologies. A significant "language barrier" currently separates technical security teams, who focus on algorithmic vulnerabilities (e.g., MITRE ATLAS), from legal and compliance professionals, who address regulatory mandates (e.g., EU AI Act, NIST AI RMF). This disciplinary disconnect prevents the accurate translation of technical vulnerabilities into financial liability, leaving practitioners unable to answer fundamental economic questions regarding contingency reserves, control return-on-investment, and insurance exposure. To bridge this gap, this research presents the AI System Threat Vector Taxonomy, a structured ontology designed explicitly for Quantitative Risk Assessment (QRA). The framework categorizes AI-specific risks into nine critical domains: Misuse, Poisoning, Privacy, Adversarial, Biases, Unreliable Outputs, Drift, Supply Chain, and IP Threat, integrating 53 operationally defined sub-threats. Uniquely, each domain maps technical vectors directly to business loss categories (Confidentiality, Integrity, Availability, Legal, Reputation), enabling the translation of abstract threats into measurable financial impact. The taxonomy is empirically validated through an analysis of 133 documented AI incidents from 2025 (achieving 100% classification coverage) and reconciled against the main AI risk frameworks. Furthermore, it is explicitly aligned with ISO/IEC 42001 controls and NIST AI RMF functions to facilitate auditability.

Large Language Models (LLM) benchmarks tell us when models fail, but not why they fail. A wrong answer on a reasoning dataset may stem from formatting issues, calculation errors, or dataset noise rather than weak reasoning. Without disentangling such causes, benchmarks remain incomplete and cannot reliably guide model improvement. We introduce ErrorMap, the first method to chart the sources of LLM failure. It extracts a model's unique "failure signature", clarifies what benchmarks measure, and broadens error identification to reduce blind spots. This helps developers debug models, aligns benchmark goals with outcomes, and supports informed model selection. ErrorMap works on any model or dataset with the same logic. Applying our method to 35 datasets and 83 models we generate ErrorAtlas, a taxonomy of model errors, revealing recurring failure patterns. ErrorAtlas highlights error types that are currently underexplored in LLM research, such as omissions of required details in the output and question misinterpretation. By shifting focus from where models succeed to why they fail, ErrorMap and ErrorAtlas enable advanced evaluation - one that exposes hidden weaknesses and directs progress. Unlike success, typically measured by task-level metrics, our approach introduces a deeper evaluation layer that can be applied globally across models and tasks, offering richer insights into model behavior and limitations. We make the taxonomy and code publicly available with plans to periodically update ErrorAtlas as new benchmarks and models emerge.

We develop and counterfactually evaluate a resolution-aware risk-design framework (PIRAP) for perpetual futures whose underlying tracks a single binary prediction-market probability through resolution. The framework specifies six components: an index estimator combining mid-price, depth-weighted mid, and time-decayed VWAP; jump-aware tiered margin sized against bounded-event terminal-collapse magnitude; leverage compression schedule contracting toward resolution; resolution-aware funding rule with boundary-aware correction; a multi-stage halt protocol; and an eligibility framework. Two formal non-portability propositions establish that standard basis-only funding paired with continuous-vol static margin fails on bounded-event underlyings. Empirical evaluation uses Polymarket's PMXT v2 archive for 2026-04-21 to 2026-04-27 (13,298-market analysis sample passing adequacy gates from 61,087 ingested; 13,115 resolved within the empirical window for E3). E1 evaluates two pre-registered stylized facts; E2 conducts counterfactual replay across three engine configurations; E3 isolates the resolution-zone protocol's contribution. Results are mixed. Five pre-registered floors: stylized-fact floors (boundary depth asymmetry, terminal-jump magnitude) PASS; welfare-side directional floors (final-hour liquidation -6%, drawdown -5.1% pooled, median PnL +14%) two FAIL one PASS; E3 mechanic floors (final-hour liquidation -80% by halt construction PASS; bad-debt frequency +2.4% FAIL). Three of five materiality floors fail: the framework as specified does not validate deployment, but the empirical record establishes a halt-versus-margin scope distinction (halt addresses execution-channel risk; terminal-jump bad-debt remains margin-side) and documents a pre-emption trade-off constraining the dynamic-margin component. The paper concludes with structural recommendations and explicit non-deployable status.