Daily Papers

Tool use extends large language models beyond parametric knowledge, but reliable execution requires balancing appropriate reasoning depth with strict structural validity. We approach this problem from a case-based perspective to present CAST, a case-driven framework that treats historical execution trajectories as structured cases. Instead of reusing raw exemplar outputs, CAST extracts case-derived signals to identify complexity profiles for estimating optimal reasoning strategies, alongside failure profiles to map likely structural breakdowns. The framework translates this knowledge into a fine-grained reward design and adaptive reasoning, enabling the model to autonomously internalize case-based strategies during reinforcement learning. Experiments on BFCLv2 and ToolBench demonstrate that CAST improves both schema-faithful execution and task-level tool-use success while reducing unnecessary deliberation. The approach achieves up to 5.85 percentage points gain in overall execution accuracy and reduces average reasoning length by 26%, significantly mitigating high-impact structural errors. Ultimately, this demonstrates how historical execution cases can provide reusable adaptation knowledge for calibrated tool use.

We introduce CRAFT, a multi-agent benchmark for evaluating pragmatic communication in large language models under strict partial information. In this setting, multiple agents with complementary but incomplete views must coordinate through natural language to construct a shared 3D structure that no single agent can fully observe. We formalize this problem as a multi-sender pragmatic reasoning task and provide a diagnostic framework that decomposes failures into spatial grounding, belief modeling and pragmatic communication errors, including a taxonomy of behavioral failure profiles in both frontier and open-weight models. Across a diverse set of models, including 8 open-weight and 7 frontier including reasoning models, we find that stronger reasoning ability does not reliably translate to better coordination: smaller open-weight models often match or outperform frontier systems, and improved individual communication does not guarantee successful collaboration. These results suggest that multi-agent coordination remains a fundamentally unsolved challenge for current language models. Our code can be found at https://github.com/csu-signal/CRAFT

Large language models (LLMs) are increasingly deployed in high-stakes domains, where rare but severe failures can result in irreversible harm. However, prevailing evaluation benchmarks often reduce complex social risk to mean-centered scalar scores, thereby obscuring distributional structure, cross-dimensional interactions, and worst-case behavior. This paper introduces Social Harm Analysis via Risk Profiles (SHARP), a framework for multidimensional, distribution-aware evaluation of social harm. SHARP models harm as a multivariate random variable and integrates explicit decomposition into bias, fairness, ethics, and epistemic reliability with a union-of-failures aggregation reparameterized as additive cumulative log-risk. The framework further employs risk-sensitive distributional statistics, with Conditional Value at Risk (CVaR95) as a primary metric, to characterize worst-case model behavior. Application of SHARP to eleven frontier LLMs, evaluated on a fixed corpus of n=901 socially sensitive prompts, reveals that models with similar average risk can exhibit more than twofold differences in tail exposure and volatility. Across models, dimension-wise marginal tail behavior varies systematically across harm dimensions, with bias exhibiting the strongest tail severities, epistemic and fairness risks occupying intermediate regimes, and ethical misalignment consistently lower; together, these patterns reveal heterogeneous, model-dependent failure structures that scalar benchmarks conflate. These findings indicate that responsible evaluation and governance of LLMs require moving beyond scalar averages toward multidimensional, tail-sensitive risk profiling.

Personality imbuing customizes LLM behavior, but safety evaluations almost always study prompt-based personas alone. We show this is incomplete: prompting and activation steering expose *different*, architecture-dependent vulnerability profiles, and testing with only one method can miss a model's dominant failure mode. Across 5,568 judged conditions on four standard models from three architecture families, persona danger rankings under system prompting are preserved across all architectures (ρ= 0.71--0.96), but activation-steering vulnerability diverges sharply and cannot be predicted from prompt-side rankings: Llama-3.1-8B is substantially more AS-vulnerable, whereas Gemma-3-27B and Qwen3.5 are more vulnerable to prompting. The most striking illustration of this divergence is the *prosocial persona paradox*: on Llama-3.1-8B, P12 (high conscientiousness + high agreeableness) is among the safest personas under prompting yet becomes the highest-ASR activation-steered persona (ASR ~0.818). This is an inversion robust to coefficient ablation and matched-strength calibration, and replicated on DeepSeek-R1-Distill-Qwen-32B. A trait refusal alignment framework, in which conscientiousness is strongly anti-aligned with refusal on Llama-3.1-8B, offers a partial geometric account. Reasoning provides only partial protection: two 32B reasoning models reach 15--18% prompt-side ASR, and activation steering separates them sharply in both baseline susceptibility and persona-specific vulnerability. Heuristic trace diagnostics suggest that the safer model retains stronger policy recall and self-correction behavior, not merely longer reasoning.

Reward modeling (RM), which captures human preferences to align large language models (LLMs), is increasingly employed in tasks such as model finetuning, response filtering, and ranking. However, due to the inherent complexity of human preferences and the limited coverage of available datasets, reward models often fail under distributional shifts or adversarial perturbations. Existing approaches for identifying such failure modes typically rely on prior knowledge about preference distributions or failure attributes, limiting their practicality in real-world settings where such information is unavailable. In this work, we propose a tractable, preference-distribution agnostic method for discovering reward model failure modes via reward guided controlled decoding. Building on this, we introduce REFORM, a self-improving reward modeling framework that enhances robustness by using the reward model itself to guide the generation of falsely scored responses. These adversarial examples are then used to augment the training data and patch the reward model's misaligned behavior. We evaluate REFORM on two widely used preference datasets Anthropic Helpful Harmless (HH) and PKU Beavertails and demonstrate that it significantly improves robustness without sacrificing reward quality. Notably, REFORM preserves performance both in direct evaluation and in downstream policy training, and further improves alignment quality by removing spurious correlations.

AI systems fail silently far more often than they fail visibly. In an analysis of 100K human-AI interactions from the WildChat dataset, we find that 79% of AI failures are invisible: something went wrong but the user gave no overt indication that there was a problem. These invisible failures cluster into eight archetypes that help us characterize where and how AI systems are failing to meet users' needs. In addition, the archetypes show systematic co-occurrence patterns indicating higher-level failure types. To address the question of whether these archetypes will remain relevant as AI systems become more capable, we also created and annotated a counterfactual dataset in which WildChat's 2024-era responses are replaced by those from three present-day frontier LMs. This analysis indicates that failure rates have dropped substantially, but that the vast majority of failures remain invisible in our sense, and the distribution of failure archetypes seems stable. Finally, we illustrate how the archetypes help us to identify systematic and variable AI limitations across different usage domains. Overall, we argue that our invisible failure taxonomy can be a key component in reliable failure monitoring for product developers, scientists, and policy makers. Our code and data are available at https://github.com/bigspinai/bigspin-invisible-failure-archetypes

The rapid proliferation of Large Language Models (LLMs) and diverse specialized benchmarks necessitates a shift from fragmented, task-specific metrics to a holistic, competitive ranking system that effectively aggregates performance across multiple ability dimensions. Primarily using static scoring, current evaluation methods are fundamentally limited. They struggle to determine the proper mix ratio across diverse benchmarks, and critically, they fail to capture a model's dynamic competitive fitness or its vulnerability when confronted with sequential, high-stakes tasks. To address this, we introduce the novel Competitive Swiss-System Dynamics (CSD) framework. CSD simulates a multi-round, sequential contest where models are dynamically paired across a curated sequence of benchmarks based on their accumulated win-loss record. And Monte Carlo Simulation (N=100,000 iterations) is used to approximate the statistically robust Expected Win Score (E[S_m]), which eliminates the noise of random pairing and early-round luck. Furthermore, we implement a Failure Sensitivity Analysis by parameterizing the per-round elimination quantity (T_k), which allows us to profile models based on their risk appetite--distinguishing between robust generalists and aggressive specialists. We demonstrate that CSD provides a more nuanced and context-aware ranking than traditional aggregate scoring and static pairwise models, representing a vital step towards risk-informed, next-generation LLM evaluation.

The continuous delivery of modern software requires the execution of many automated pipeline jobs. These jobs ensure the frequent release of new software versions while detecting code problems at an early stage. For TELUS, our industrial partner in the telecommunications field, reliable job execution is crucial to minimize wasted time and streamline Continuous Deployment (CD). In this context, flaky job failures are one of the main issues hindering CD. Prior studies proposed techniques based on machine learning to automate the detection of flaky jobs. While valuable, these solutions are insufficient to address the waste associated with the diagnosis of flaky failures, which remain largely unexplored due to the wide range of underlying causes. This study examines 4,511 flaky job failures at TELUS to identify the different categories of flaky failures that we prioritize based on Recency, Frequency, and Monetary (RFM) measures. We identified 46 flaky failure categories that we analyzed using clustering and RFM measures to determine 14 priority categories for future automated diagnosis and repair research. Our findings also provide valuable insights into the evolution and impact of these categories. The identification and prioritization of flaky failure categories using RFM analysis introduce a novel approach that can be used in other contexts.

Efficient network management is one of the key challenges of the constantly growing and increasingly complex wide area networks (WAN). The paradigm shift towards virtualized (NFV) and software defined networks (SDN) in the next generation of mobile networks (5G), as well as the latest scientific insights in the field of Artificial Intelligence (AI) enable the transition from manually managed networks nowadays to fully autonomic and dynamic self-organized networks (SON). This helps to meet the KPIs and reduce at the same time operational costs (OPEX). In this paper, an AI driven concept is presented for the malfunction detection in NFV applications with the help of semi-supervised learning. For this purpose, a profile of the application under test is created. This profile then is used as a reference to detect abnormal behaviour. For example, if there is a bug in the updated version of the app, it is now possible to react autonomously and roll-back the NFV app to a previous version in order to avoid network outages.

When a phone-use agent avoids harm, does that show safety, or simply inability to act? Existing evaluations often cannot tell. A harmful outcome may be avoided because the agent recognized the risk and chose the safe action, or because it failed to understand the screen or execute any relevant action at all. These cases have different causes and call for different fixes, yet current benchmarks often merge them under task success, refusal, or final harmful outcome. We address this problem with PhoneSafety, a benchmark of 700 safety-critical moments drawn from real phone interactions across more than 130 apps. Each instance isolates the next decision at a risky moment and asks a simple question: does the model take the safe action, take the unsafe action, or fail to do anything useful? We evaluate eight representative phone-use agents under this framework. Our results reveal two main patterns. First, stronger general phone-use ability does not reliably imply safer choices at risky moments. Models that perform better on ordinary app tasks are not always the ones that behave more safely when the next action matters. Second, failures to do anything useful behave like a capability signal rather than a safety signal: they are concentrated in more visually and operationally demanding settings and remain stable when the evaluation protocol changes. Across models, failures split into two recurring patterns: unsafe choices in settings where the model can act but chooses wrongly, and inability to act in more visually and operationally demanding screens. Overall, a harmless outcome is not enough to count as evidence of safety. Evaluating phone-use agents requires separating unsafe judgment from inability to act.

As the large language model (LLM) ecosystem expands, individual models exhibit varying capabilities across queries, benchmarks, and domains, motivating the development of LLM routing. While prior work has largely focused on router mechanism design, LLM profiles, which capture model capabilities, remain underexplored. In this work, we ask: How does LLM profile design affect routing performance across different routers? Addressing this question helps clarify the role of profiles in routing, disentangle profile design from router design, and enable fairer comparison and more principled development of routing systems. To this end, we view LLM profiling as a structured information integration problem over heterogeneous interaction histories. We develop a general design space of LLM profiles, named RouteProfile, along four key dimensions: organizational form, representation type, aggregation depth, and learning configuration. Through systematic evaluation across three representative routers under both standard and new-LLM generalization settings, we show that: (1) structured profiles consistently outperform flat ones; (2) query-level signals are more reliable than coarse domain-level signals; and (3) generalization to newly introduced models benefits most from structured profiles under trainable configurations. Overall, our work highlights LLM profile design as an important direction for future routing research.

Standard factuality evaluations of LLMs treat all errors alike, obscuring whether failures arise from missing knowledge (empty shelves) or from limited access to encoded facts (lost keys). We propose a behavioral framework that profiles factual knowledge at the level of facts rather than questions, characterizing each fact by whether it is encoded, and then by how accessible it is: cannot be recalled, can be directly recalled, or can only be recalled with inference-time computation (thinking). To support such profiling, we introduce WikiProfile, a new benchmark constructed via an automated pipeline with a prompted LLM grounded in web search. Across 4 million responses from 13 LLMs, we find that encoding is nearly saturated in frontier models on our benchmark, with GPT-5 and Gemini-3 encoding 95--98% of facts. However, recall remains a major bottleneck: many errors previously attributed to missing knowledge instead stem from failures to access it. These failures are systematic and disproportionately affect long-tail facts and reverse questions. Finally, we show that thinking improves recall and can recover a substantial fraction of failures, indicating that future gains may rely less on scaling and more on methods that improve how models utilize what they already encode.

Deployed multimodal systems can fail in ways that evaluators did not anticipate. In order to find these failures before deployment, we introduce MultiMon, a system that automatically identifies systematic failures -- generalizable, natural-language descriptions of patterns of model failures. To uncover systematic failures, MultiMon scrapes a corpus for examples of erroneous agreement: inputs that produce the same output, but should not. It then prompts a language model (e.g., GPT-4) to find systematic patterns of failure and describe them in natural language. We use MultiMon to find 14 systematic failures (e.g., "ignores quantifiers") of the CLIP text-encoder, each comprising hundreds of distinct inputs (e.g., "a shelf with a few/many books"). Because CLIP is the backbone for most state-of-the-art multimodal systems, these inputs produce failures in Midjourney 5.1, DALL-E, VideoFusion, and others. MultiMon can also steer towards failures relevant to specific use cases, such as self-driving cars. We see MultiMon as a step towards evaluation that autonomously explores the long tail of potential system failures. Code for MULTIMON is available at https://github.com/tsb0601/MultiMon.

Imitation learning (IL) with generative models, such as diffusion and flow matching, has enabled robots to perform complex, long-horizon tasks. However, distribution shifts from unseen environments or compounding action errors can still cause unpredictable and unsafe behavior, leading to task failure. Early failure prediction during runtime is therefore essential for deploying robots in human-centered and safety-critical environments. We propose FIPER, a general framework for Failure Prediction at Runtime for generative IL policies that does not require failure data. FIPER identifies two key indicators of impending failure: (i) out-of-distribution (OOD) observations detected via random network distillation in the policy's embedding space, and (ii) high uncertainty in generated actions measured by a novel action-chunk entropy score. Both failure prediction scores are calibrated using a small set of successful rollouts via conformal prediction. A failure alarm is triggered when both indicators, aggregated over short time windows, exceed their thresholds. We evaluate FIPER across five simulation and real-world environments involving diverse failure modes. Our results demonstrate that FIPER better distinguishes actual failures from benign OOD situations and predicts failures more accurately and earlier than existing methods. We thus consider this work an important step towards more interpretable and safer generative robot policies. Code, data and videos are available at https://tum-lsy.github.io/fiper_website.

User profile modeling plays a key role in personalized systems, as it requires building accurate profiles and updating them with new information. In this paper, we present two high-quality open-source user profile datasets: one for profile construction and another for profile updating. These datasets offer a strong basis for evaluating user profile modeling techniques in dynamic settings. We also show a methodology that uses large language models (LLMs) to tackle both profile construction and updating. Our method uses a probabilistic framework to predict user profiles from input text, allowing for precise and context-aware profile generation. Our experiments demonstrate that models like Mistral-7b and Llama2-7b perform strongly in both tasks. LLMs improve the precision and recall of the generated profiles, and high evaluation scores confirm the effectiveness of our approach.

Clawdbot is a self-hosted, tool-using personal AI agent with a broad action space spanning local execution and web-mediated workflows, which raises heightened safety and security concerns under ambiguity and adversarial steering. We present a trajectory-centric evaluation of Clawdbot across six risk dimensions. Our test suite samples and lightly adapts scenarios from prior agent-safety benchmarks (including ATBench and LPS-Bench) and supplements them with hand-designed cases tailored to Clawdbot's tool surface. We log complete interaction trajectories (messages, actions, tool-call arguments/outputs) and assess safety using both an automated trajectory judge (AgentDoG-Qwen3-4B) and human review. Across 34 canonical cases, we find a non-uniform safety profile: performance is generally consistent on reliability-focused tasks, while most failures arise under underspecified intent, open-ended goals, or benign-seeming jailbreak prompts, where minor misinterpretations can escalate into higher-impact tool actions. We supplemented the overall results with representative case studies and summarized the commonalities of these cases, analyzing the security vulnerabilities and typical failure modes that Clawdbot is prone to trigger in practice.

Data profiling is an essential process in modern data-driven industries. One of its critical components is the discovery and validation of complex statistics, including functional dependencies, data constraints, association rules, and others. However, most existing data profiling systems that focus on complex statistics do not provide proper integration with the tools used by contemporary data scientists. This creates a significant barrier to the adoption of these tools in the industry. Moreover, existing systems were not created with industrial-grade workloads in mind. Finally, they do not aim to provide descriptive explanations, i.e. why a given pattern is not found. It is a significant issue as it is essential to understand the underlying reasons for a specific pattern's absence to make informed decisions based on the data. Because of that, these patterns are effectively rest in thin air: their application scope is rather limited, they are rarely used by the broader public. At the same time, as we are going to demonstrate in this presentation, complex statistics can be efficiently used to solve many classic data quality problems. Desbordante is an open-source data profiler that aims to close this gap. It is built with emphasis on industrial application: it is efficient, scalable, resilient to crashes, and provides explanations. Furthermore, it provides seamless Python integration by offloading various costly operations to the C++ core, not only mining. In this demonstration, we show several scenarios that allow end users to solve different data quality problems. Namely, we showcase typo detection, data deduplication, and data anomaly detection scenarios.

We report a case study of four end-to-end attempts to autonomously generate ML research papers using a pipeline of six LLM agents mapped to stages of the scientific workflow. Of these four, three attempts failed during implementation or evaluation. One completed the pipeline and was accepted to Agents4Science 2025, an experimental inaugural venue that required AI systems as first authors, passing both human and multi-AI review. From these attempts, we document six recurring failure modes: bias toward training data defaults, implementation drift under execution pressure, memory and context degradation across long-horizon tasks, overexcitement that declares success despite obvious failures, insufficient domain intelligence, and weak scientific taste in experimental design. We conclude by discussing four design principles for more robust AI-scientist systems, implications for autonomous scientific discovery, and we release all prompts, artifacts, and outputs at https://github.com/Lossfunk/ai-scientist-artefacts-v1

AI agents often fail in ways that are difficult to localize because executions are probabilistic, long-horizon, multi-agent, and mediated by noisy tool outputs. We address this gap by manually annotating failed agent runs and release a novel benchmark of 115 failed trajectories spanning structured API workflows, incident management, and open-ended web/file tasks. Each trajectory is annotated with a critical failure step and a category from a grounded-theory derived, cross-domain failure taxonomy. To mitigate the human cost of failure attribution, we present AGENTRX, an automated domain-agnostic diagnostic framework that pinpoints the critical failure step in a failed agent trajectory. It synthesizes constraints, evaluates them step-by-step, and produces an auditable validation log of constraint violations with associated evidence; an LLM-based judge uses this log to localize the critical step and category. Our framework improves step localization and failure attribution over existing baselines across three domains.

Ensuring the safety of large language models (LLMs) is critical for responsible deployment, yet existing evaluations often prioritize performance over identifying failure modes. We introduce Phare, a multilingual diagnostic framework to probe and evaluate LLM behavior across three critical dimensions: hallucination and reliability, social biases, and harmful content generation. Our evaluation of 17 state-of-the-art LLMs reveals patterns of systematic vulnerabilities across all safety dimensions, including sycophancy, prompt sensitivity, and stereotype reproduction. By highlighting these specific failure modes rather than simply ranking models, Phare provides researchers and practitioners with actionable insights to build more robust, aligned, and trustworthy language systems.

We study whether phone-use agents respect privacy while completing benign mobile tasks. This question has remained hard to answer because privacy-compliant behavior is not operationalized for phone-use agents, and ordinary apps do not reveal exactly what data agents type into which form entries during execution. To make this question measurable, we introduce MyPhoneBench, a verifiable evaluation framework for privacy behavior in mobile agents. We operationalize privacy-respecting phone use as permissioned access, minimal disclosure, and user-controlled memory through a minimal privacy contract, iMy, and pair it with instrumented mock apps plus rule-based auditing that make unnecessary permission requests, deceptive re-disclosure, and unnecessary form filling observable and reproducible. Across five frontier models on 10 mobile apps and 300 tasks, we find that task success, privacy-compliant task completion, and later-session use of saved preferences are distinct capabilities, and no single model dominates all three. Evaluating success and privacy jointly reshuffles the model ordering relative to either metric alone. The most persistent failure mode across models is simple data minimization: agents still fill optional personal entries that the task does not require. These results show that privacy failures arise from over-helpful execution of benign tasks, and that success-only evaluation overestimates the deployment readiness of current phone-use agents. All code, mock apps, and agent trajectories are publicly available at~ https://github.com/tangzhy/MyPhoneBench.

As modern microservice systems grow increasingly popular and complex-often consisting of hundreds or even thousands of fine-grained, interdependent components-they are becoming more susceptible to frequent and subtle failures. Ensuring system reliability therefore hinges on accurate and efficient failure localization. Traditional failure localization approaches based on small models lack the flexibility to adapt to diverse failure scenarios, while recent LLM-based methods suffer from two major limitations: they often rely on rigid invocation workflows that constrain the model's ability to dynamically explore optimal localization paths, and they require resource-intensive inference, making them cost-prohibitive for real-world deployment. To address these challenges, we explore the use of reinforcement fine-tuning to equip lightweight LLMs with reasoning and self-refinement capabilities, significantly improving the cost-effectiveness and adaptability of LLM-based failure localization. We begin with an empirical study to identify three key capabilities essential for accurate localization. Building on these insights, we propose a progressive multi-stage GRPO fine-tuning framework, which integrates a multi-factor failure localization grader and a recursion-of-thought actor module. The resulting model, ThinkFL, not only outperforms existing state-of-the-art LLMs and baseline methods in localization accuracy but also reduces end-to-end localization latency from minutes to seconds, demonstrating strong potential for real-world applications.

Proactive interventions by LLM critic models are often assumed to improve reliability, yet their effects at deployment time are poorly understood. We show that a binary LLM critic with strong offline accuracy (AUROC 0.94) can nevertheless cause severe performance degradation, inducing a 26 percentage point (pp) collapse on one model while affecting another by near zero pp. This variability demonstrates that LLM critic accuracy alone is insufficient to determine whether intervention is safe. We identify a disruption-recovery tradeoff: interventions may recover failing trajectories but also disrupt trajectories that would have succeeded. Based on this insight, we propose a pre-deployment test that uses a small pilot of 50 tasks to estimate whether intervention is likely to help or harm, without requiring full deployment. Across benchmarks, the test correctly anticipates outcomes: intervention degrades performance on high-success tasks (0 to -26 pp), while yielding a modest improvement on the high-failure ALFWorld benchmark (+2.8 pp, p=0.014). The primary value of our framework is therefore identifying when not to intervene, preventing severe regressions before deployment.

An ideal model evaluation should achieve two goals: identifying where the model fails and providing actionable improvement guidance. Toward these goals for Language Model (LM) evaluations, we formulate the problem of generating a weakness profile, a set of weaknesses expressed in natural language, given an LM's performance on every individual instance in a benchmark. We introduce a suite of quantitative assessments to compare different weakness profiling methods. We also propose a weakness profiling method EvalTree. It constructs a capability tree where each node represents a capability described in natural language and is linked to a subset of benchmark instances that specifically evaluate this capability; it then extracts nodes where the LM performs poorly to generate a weakness profile. On the MATH and WildChat benchmarks, we show that EvalTree outperforms baseline weakness profiling methods by identifying weaknesses more precisely and comprehensively. Weakness profiling further enables weakness-guided data collection, and training data collection guided by EvalTree-identified weaknesses improves LM performance more than other data collection strategies. We also show how EvalTree exposes flaws in Chatbot Arena's human-voter-based evaluation practice. To facilitate future work, we release our code and an interface that allows practitioners to interactively explore the capability trees built by EvalTree.

User profiling is pivotal for recommendation systems, as it transforms raw user interaction data into concise and structured representations that drive personalized recommendations. While traditional embedding-based profiles lack interpretability and adaptability, recent advances with large language models (LLMs) enable text-based profiles that are semantically richer and more transparent. However, existing methods often adhere to fixed formats that limit their ability to capture the full diversity of user behaviors. In this paper, we introduce LettinGo, a novel framework for generating diverse and adaptive user profiles. By leveraging the expressive power of LLMs and incorporating direct feedback from downstream recommendation tasks, our approach avoids the rigid constraints imposed by supervised fine-tuning (SFT). Instead, we employ Direct Preference Optimization (DPO) to align the profile generator with task-specific performance, ensuring that the profiles remain adaptive and effective. LettinGo operates in three stages: (1) exploring diverse user profiles via multiple LLMs, (2) evaluating profile quality based on their impact in recommendation systems, and (3) aligning the profile generation through pairwise preference data derived from task performance. Experimental results demonstrate that our framework significantly enhances recommendation accuracy, flexibility, and contextual awareness. This work enhances profile generation as a key innovation for next-generation recommendation systems.

Software engineers develop, fine-tune, and deploy deep learning (DL) models. They use and re-use models in a variety of development frameworks and deploy them on a range of runtime environments. In this diverse ecosystem, engineers use DL model converters to move models from frameworks to runtime environments. However, errors in converters can compromise model quality and disrupt deployment. The failure frequency and failure modes of DL model converters are unknown. In this paper, we conduct the first failure analysis on DL model converters. Specifically, we characterize failures in model converters associated with ONNX (Open Neural Network eXchange). We analyze past failures in the ONNX converters in two major DL frameworks, PyTorch and TensorFlow. The symptoms, causes, and locations of failures (for N=200 issues), and trends over time are also reported. We also evaluate present-day failures by converting 8,797 models, both real-world and synthetically generated instances. The consistent result from both parts of the study is that DL model converters commonly fail by producing models that exhibit incorrect behavior: 33% of past failures and 8% of converted models fell into this category. Our results motivate future research on making DL software simpler to maintain, extend, and validate.

Providing dialogue agents with a profile representation can improve their consistency and coherence, leading to better conversations. However, current profile-based dialogue datasets for training such agents contain either explicit profile representations that are simple and dialogue-specific, or implicit representations that are difficult to collect. In this work, we propose a unified framework in which we bring together both standard and more sophisticated profile representations by creating a new resource where each dialogue is aligned with all possible speaker representations such as communication style, biographies, and personality. This framework allows to test several baselines built using generative language models with several profile configurations. The automatic evaluation shows that profile-based models have better generalisation capabilities than models trained on dialogues only, both in-domain and cross-domain settings. These results are consistent for fine-tuned models and instruction-based LLMs. Additionally, human evaluation demonstrates a clear preference for generations consistent with both profile and context. Finally, to account for possible privacy concerns, all experiments are done under two configurations: inter-character and intra-character. In the former, the LM stores the information about the character in its internal representation, while in the latter, the LM does not retain any personal information but uses it only at inference time.

As AI becomes more capable, we entrust it with more general and consequential tasks. The risks from failure grow more severe with increasing task scope. It is therefore important to understand how extremely capable AI models will fail: Will they fail by systematically pursuing goals we do not intend? Or will they fail by being a hot mess, and taking nonsensical actions that do not further any goal? We operationalize this question using a bias-variance decomposition of the errors made by AI models: An AI's incoherence on a task is measured over test-time randomness as the fraction of its error that stems from variance rather than bias in task outcome. Across all tasks and frontier models we measure, the longer models spend reasoning and taking actions, the more incoherent their failures become. Incoherence changes with model scale in a way that is experiment dependent. However, in several settings, larger, more capable models are more incoherent than smaller models. Consequently, scale alone seems unlikely to eliminate incoherence. Instead, as more capable AIs pursue harder tasks, requiring more sequential action and thought, our results predict failures to be accompanied by more incoherent behavior. This suggests a future where AIs sometimes cause industrial accidents (due to unpredictable misbehavior), but are less likely to exhibit consistent pursuit of a misaligned goal. This increases the relative importance of alignment research targeting reward hacking or goal misspecification.

We set out to train behavioral dispositions (self-verification, uncertainty acknowledgment, feedback integration) into small language models (0.6B to 2.3B effective parameters) through a four-stage all-MIT distillation pipeline, with follow-on experiments on inference-time attention-head interventions and a frozen-base confidence-gated sidecar. An internal draft reported +33.9-point MCAS and +15.3-point HumanEval gains on a Qwen3-0.6B student; a second-pass sanity check falsified both numbers before publication. The HumanEval delta was a truncation artifact (n_predict=512) that inverted to -8.0 points at n_predict=1024; the MCAS gain disappeared under apples-to-apples scoring. That falsification triggered three subsequent arcs. Across (1) SFT/DPO LoRA on three model families and two domains, (2) inference-time attention-head tempering on o_proj, and (3) a training-free frozen-base sidecar reading the final-token hidden state h_last, we find no operator that moves judge-measured disposition without damaging content or collapsing into stylistic mimicry. The failure is consistent across five models (Qwen3-0.6B, Qwen3-1.7B, Qwen3.5-0.8B, Gemma 4 E2B, and SmolLM2-1.7B-Instruct). A within-distribution cross-validation pass (AUC=0.683) collapsed to chance on fresh prompts (AUC=0.516). We contribute a three-arc negative result with mechanism, a two-failure-mode taxonomy for linear h_last probes, and an honest falsification pipeline that converts the class of false positives we ourselves produced into publishable negatives. As an independent finding, Gemma 4 E2B exhibits near-complete confidence-correctness decoupling on the Chef domain (assertion asymmetry -0.009; the model asserts at 91% regardless of correctness).

We introduce FailureSensorIQ, a novel Multi-Choice Question-Answering (MCQA) benchmarking system designed to assess the ability of Large Language Models (LLMs) to reason and understand complex, domain-specific scenarios in Industry 4.0. Unlike traditional QA benchmarks, our system focuses on multiple aspects of reasoning through failure modes, sensor data, and the relationships between them across various industrial assets. Through this work, we envision a paradigm shift where modeling decisions are not only data-driven using statistical tools like correlation analysis and significance tests, but also domain-driven by specialized LLMs which can reason about the key contributors and useful patterns that can be captured with feature engineering. We evaluate the Industrial knowledge of over a dozen LLMs-including GPT-4, Llama, and Mistral-on FailureSensorIQ from different lens using Perturbation-Uncertainty-Complexity analysis, Expert Evaluation study, Asset-Specific Knowledge Gap analysis, ReAct agent using external knowledge-bases. Even though closed-source models with strong reasoning capabilities approach expert-level performance, the comprehensive benchmark reveals a significant drop in performance that is fragile to perturbations, distractions, and inherent knowledge gaps in the models. We also provide a real-world case study of how LLMs can drive the modeling decisions on 3 different failure prediction datasets related to various assets. We release: (a) expert-curated MCQA for various industrial assets, (b) FailureSensorIQ benchmark and Hugging Face leaderboard based on MCQA built from non-textual data found in ISO documents, and (c) LLMFeatureSelector, an LLM-based feature selection scikit-learn pipeline. The software is available at https://github.com/IBM/FailureSensorIQ.

We introduce SWE-Bench Pro, a substantially more challenging benchmark that builds upon the best practices of SWE-BENCH [25], but is explicitly designed to capture realistic, complex, enterprise-level problems beyond the scope of SWE-BENCH. SWE-BENCH PRO contains 1,865 problems sourced from a diverse set of 41 actively maintained repositories spanning business applications, B2B services, and developer tools. The benchmark is partitioned into a public set with open access to problems sourced from 11 repositories, a held-out set of 12 repositories and a commercial set of 18 proprietary repositories where we have formal partnership agreements with early-stage startups. Problems in the held-out and the commercial set are not publicly accessible, but we release results on the commercial set. Our benchmark features long-horizon tasks that may require hours to days for a professional software engineer to complete, often involving patches across multiple files and substantial code modifications. All tasks are human-verified and augmented with sufficient context to ensure resolvability. In our evaluation of widely used coding models, under a unified scaffold, we observe that their performance on SWE-Bench PRO remains below 25% (Pass@1), with GPT-5 achieving the highest score to date at 23.3%. To better understand these limitations, we cluster the failure modes observed in the collected agent trajectories for a clearer characterization of the error patterns exhibited by current models. Overall, SWE-BENCH PRO provides a contamination-resistant testbed that more faithfully captures the complexity and diversity of real-world software development, advancing the pursuit of truly autonomous software engineering agents at a professional level.

Failure attribution in LLM multi-agent systems-identifying the agent and step responsible for task failures-provides crucial clues for systems debugging but remains underexplored and labor-intensive. In this paper, we propose and formulate a new research area: automated failure attribution for LLM multi-agent systems. To support this initiative, we introduce the Who&When dataset, comprising extensive failure logs from 127 LLM multi-agent systems with fine-grained annotations linking failures to specific agents and decisive error steps. Using the Who&When, we develop and evaluate three automated failure attribution methods, summarizing their corresponding pros and cons. The best method achieves 53.5% accuracy in identifying failure-responsible agents but only 14.2% in pinpointing failure steps, with some methods performing below random. Even SOTA reasoning models, such as OpenAI o1 and DeepSeek R1, fail to achieve practical usability. These results highlight the task's complexity and the need for further research in this area. Code and dataset are available at https://github.com/mingyin1/Agents_Failure_Attribution

Profile extrusion is a continuous production process for manufacturing plastic profiles from molten polymer. Especially interesting is the design of the die, through which the melt is pressed to attain the desired shape. However, due to an inhomogeneous velocity distribution at the die exit or residual stresses inside the extrudate, the final shape of the manufactured part often deviates from the desired one. To avoid these deviations, the shape of the die can be computationally optimized, which has already been investigated in the literature using classical optimization approaches. A new approach in the field of shape optimization is the utilization of Reinforcement Learning (RL) as a learning-based optimization algorithm. RL is based on trial-and-error interactions of an agent with an environment. For each action, the agent is rewarded and informed about the subsequent state of the environment. While not necessarily superior to classical, e.g., gradient-based or evolutionary, optimization algorithms for one single problem, RL techniques are expected to perform especially well when similar optimization tasks are repeated since the agent learns a more general strategy for generating optimal shapes instead of concentrating on just one single problem. In this work, we investigate this approach by applying it to two 2D test cases. The flow-channel geometry can be modified by the RL agent using so-called Free-Form Deformation, a method where the computational mesh is embedded into a transformation spline, which is then manipulated based on the control-point positions. In particular, we investigate the impact of utilizing different agents on the training progress and the potential of wall time saving by utilizing multiple environments during training.

Autonomous agent systems powered by Large Language Models (LLMs) have demonstrated promising capabilities in automating complex tasks. However, current evaluations largely rely on success rates without systematically analyzing the interactions, communication mechanisms, and failure causes within these systems. To bridge this gap, we present a benchmark of 34 representative programmable tasks designed to rigorously assess autonomous agents. Using this benchmark, we evaluate three popular open-source agent frameworks combined with two LLM backbones, observing a task completion rate of approximately 50%. Through in-depth failure analysis, we develop a three-tier taxonomy of failure causes aligned with task phases, highlighting planning errors, task execution issues, and incorrect response generation. Based on these insights, we propose actionable improvements to enhance agent planning and self-diagnosis capabilities. Our failure taxonomy, together with mitigation advice, provides an empirical foundation for developing more robust and effective autonomous agent systems in the future.

Large language model-driven multi-agent systems (LLM-MAS) excel at complex tasks, yet unreliable agents remain a key bottleneck to system-level reliability. Automatic failure attribution is therefore critical, but existing approaches, such as direct prediction of agent-error pairs and agent-first failure attribution, rely on local logs of agents and miss global failures that only manifest over full interaction trajectories, such as cross-step inconsistencies and inter-agent coordination errors. Moreover, directly predicting failures induces a large combinatorial search space, hindering fine-grained attribution. To address these challenges, we propose VerifyMAS, a hypothesis verification framework for agent failure attribution. Instead of directly predicting faulty agents and error types, VerifyMAS formulates and verifies failure hypotheses against full trajectories. This verification-based approach decomposes attribution into trajectory-level error validation and fine-grained agent localization, providing an error-first attribution approach that captures global failure patterns while substantially reducing the search space. We further introduce a hypothesis-based data construction strategy grounded in a structured error taxonomy and fine-tune a specialized LLM verifier model for trajectory-level failure verification and agent attribution. Experiments on Aegis-Bench and Who&When show that VerifyMAS consistently improves diverse backbone models, including open-source Qwen and API-based GPT models, outperforming prior methods without sacrificing inference efficiency for long multi-agent trajectories.

With the rapid improvement in the general capabilities of LLMs, LLM personalization, i.e., how to build LLM systems that can generate personalized responses or services that are tailored to distinct user personas, has become an increasingly important research and engineering problem. However, unlike many new challenging benchmarks being released for evaluating the general/reasoning capabilities, the lack of high-quality benchmarks for evaluating LLM personalization greatly hinders progress in this field. To address this, we introduce PersonaFeedback, a new benchmark that directly evaluates LLMs' ability to provide personalized responses given pre-defined user personas and queries. Unlike existing benchmarks that require models to infer implicit user personas from historical interactions, PersonaFeedback decouples persona inference from personalization, focusing on evaluating the model's ability to generate responses tailored to explicit personas. PersonaFeedback consists of 8298 human-annotated test cases, which are categorized into easy, medium, and hard tiers based on the contextual complexity of the user personas and the difficulty in distinguishing subtle differences between two personalized responses. We conduct comprehensive evaluations across a wide range of models. The empirical results reveal that even state-of-the-art LLMs that can solve complex real-world reasoning tasks could fall short on the hard tier of PersonaFeedback where even human evaluators may find the distinctions challenging. Furthermore, we conduct an in-depth analysis of failure modes across various types of systems, demonstrating that the current retrieval-augmented framework should not be seen as a de facto solution for personalization tasks. All benchmark data, annotation protocols, and the evaluation pipeline will be publicly available to facilitate future research on LLM personalization.

Tool-using LLM agents fail through trajectories rather than only final responses, as they may execute unsafe tool calls, follow injected instructions, comply with harmful requests, or over-refuse benign tasks despite producing a seemingly safe answer. Existing safety-alignment signals are largely response-level or off-policy, and often incur a safety-utility trade-off: improving agent safety comes at the cost of degraded task performance. Such sparse and single-objective rewards severely limit real-world usability. To bridge this gap, we propose FATE, an on-policy self-evolving framework that transforms verifier-scored failures into repair supervision without expert demonstrations. For each failure, the same policy proposes repair candidates, which are then re-scored by verifiers and filtered across security, utility, over-refusal control, and trajectory validity. This dense trajectory-level information is then used as a supervision signal for agent self-evolution. During this process, we further introduce Pareto-Front Policy Optimization (PFPO), combining supervised warmup with Pareto-aware policy optimization to preserve safety-utility trade-offs. Experiments on AgentDojo, AgentHarm, and ATBench show that FATE improves safety across different models and scales while preserving useful behavior. Compared with strong baselines, FATE reduces attack success rate by 33.5%, harmful compliance by 82.6%, and improves external trajectory-safety diagnosis by 6.5%. These results suggest that failed trajectories can provide structured repair supervision for safer self-evolving agents.

Predicting the remaining useful life (RUL) of ball bearings is an active area of research, where novel machine learning techniques are continuously being applied to predict degradation trends and anticipate failures before they occur. However, few studies have explicitly addressed the challenge of handling censored data, where information about a specific event (\eg mechanical failure) is incomplete or only partially observed. To address this issue, we introduce a novel and flexible method for early fault detection using Kullback-Leibler (KL) divergence and RUL estimation using survival analysis that naturally supports censored data. We demonstrate our approach in the XJTU-SY dataset using a 5-fold cross-validation strategy across three different operating conditions. When predicting the time to failure for bearings under the highest load (C1, 12.0 kN and 2100 RPM) with 25% random censoring, our approach achieves a mean absolute error (MAE) of 14.7 minutes (95% CI = 13.6-15.8) using a linear CoxPH model, and an MAE of 12.6 minutes (95% CI = 11.8-13.4) using a nonlinear Random Survival Forests model, compared to an MAE of 18.5 minutes (95% CI = 17.4-19.6) using a linear LASSO model that does not support censoring. Moreover, our approach achieves a mean cumulative relative accuracy (CRA) of 0.7586 over 5 bearings under the highest load, which improves over several state-of-the-art baselines. Our work highlights the importance of considering censored data as part of the model design when building predictive models for early fault detection and RUL estimation.

When deploying large language models (LLMs), it is important to ensure that these models are not only capable, but also reliable. Many benchmarks have been created to track LLMs' growing capabilities, however there has been no similar focus on measuring their reliability. To understand the potential ramifications of this gap, we investigate how well current benchmarks quantify model reliability. We find that pervasive label errors can compromise these evaluations, obscuring lingering model failures and hiding unreliable behavior. Motivated by this gap in the evaluation of reliability, we then propose the concept of so-called platinum benchmarks, i.e., benchmarks carefully curated to minimize label errors and ambiguity. As a first attempt at constructing such benchmarks, we revise examples from fifteen existing popular benchmarks. We evaluate a wide range of models on these platinum benchmarks and find that, indeed, frontier LLMs still exhibit failures on simple tasks such as elementary-level math word problems. Analyzing these failures further reveals previously unidentified patterns of problems on which frontier models consistently struggle. We provide code at https://github.com/MadryLab/platinum-benchmarks

One of the main challenges developers face in the use of continuous integration (CI) and deployment pipelines is the occurrence of intermittent job failures, which result from unexpected non-deterministic issues (e.g., flaky tests or infrastructure problems) rather than regular code-related errors such as bugs. Prior studies developed machine learning (ML) models trained on large datasets of job logs to classify job failures as either intermittent or regular. As an alternative to costly manual labeling of large datasets, the state-of-the-art (SOTA) approach leveraged a heuristic based on non-deterministic job reruns. However, this method mislabels intermittent job failures as regular in contexts where rerunning suspicious job failures is not an explicit policy, and therefore limits the SOTA's performance in practice. In fact, our manual analysis of 2,125 job failures from 5 industrial and 1 open-source projects reveals that, on average, 32% of intermittent job failures are mislabeled as regular. To address these limitations, this paper introduces a novel approach to intermittent job failure detection using few-shot learning (FSL). Specifically, we fine-tune a small language model using a few number of manually labeled log examples to generate rich embeddings, which are then used to train an ML classifier. Our FSL-based approach achieves 70-88% F1-score with only 12 shots in all projects, outperforming the SOTA, which proved ineffective (34-52% F1-score) in 4 projects. Overall, this study underlines the importance of data quality over quantity and provides a more efficient and practical framework for the detection of intermittent job failures in organizations.

We introduce self-invoking code generation, a new task designed to evaluate the progressive reasoning and problem-solving capabilities of LLMs. In this task, models are presented with a base problem and a related, more complex problem. They must solve the base problem and then utilize its solution to address the more complex one. This work features three key contributions. First, we propose a general recipe for generating more challenging versions of existing benchmarks, resulting in three new benchmarks: HumanEval Pro, MBPP Pro, and BigCodeBench-Lite Pro, specifically designed to assess LLMs on self-invoking code generation. Second, from the analysis of experimental results over twenty LLMs on our benchmarks, we have two important observations: (i) Most LLMs excel in traditional code generation benchmarks like HumanEval and MBPP, but their performance declines on self-invoking tasks. For example, o1-mini achieves 96.2% pass@1 on HumanEval but only 76.2% on HumanEval Pro. (ii) On self-invoking code generation task, the instruction-tuned models demonstrate only marginal improvements compared to the base models. Third, we disclose the types of failure modes that exist in our evaluation results. All these results underscore the need for further advancements in self-invoking code generation tasks and provide a new direction for future research on enhancing LLMs' code reasoning capabilities.

Despite widespread deployment of Large Language Models, systematic evaluation of instruction-following capabilities remains challenging. While comprehensive benchmarks exist, focused assessments that quickly diagnose specific instruction adherence patterns are valuable. As newer models may be trained on existing benchmarks, novel evaluation approaches are needed to assess genuine capabilities rather than memorized performance. This paper presents a streamlined evaluation framework using twenty carefully designed prompts to assess LLM instruction-following across diverse task categories. We demonstrate this framework through a large-scale empirical study conducted on October 14, 2025, testing 256 verified working models from 331 available via OpenRouter. To ensure methodological rigor and prevent selection bias, we first verified each model's basic functionality before inclusion. Unlike large-scale benchmarks requiring extensive computational resources, our approach offers a practical diagnostic tool researchers and practitioners can readily apply. Our methodology builds upon verifiable instructions while introducing a compact test suite balancing comprehensiveness with efficiency. Each prompt targets distinct aspects of instruction following, including format compliance, content constraints, logical sequencing, and multi-step task execution. We evaluate models from major providers (OpenAI, Anthropic, Google, Meta, Mistral) and emerging implementations (Qwen, DeepSeek, community models), providing comparative performance analysis. Our findings reveal consistent failure modes and identify specific instruction types posing particular challenges. This work contributes both a practical evaluation tool and one of the most comprehensive empirical analyses of instruction-following capabilities across the contemporary LLM landscape.

The advent of instruction-tuned Large Language Models designed for coding tasks (Code LLMs) has transformed software engineering practices. However, their robustness against various input challenges remains a critical concern. This study introduces DegradePrompter, a novel method designed to systematically evaluate the robustness of instruction-tuned Code LLMs. We assess the impact of diverse input challenges on the functionality and correctness of generated code using rigorous metrics and established benchmarks. Our comprehensive evaluation includes five state-of-the-art open-source models and three production-grade closed-source models, revealing varying degrees of robustness. Open-source models demonstrate an increased susceptibility to input perturbations, resulting in declines in functional correctness ranging from 12% to 34%. In contrast, commercial models demonstrate relatively greater resilience, with performance degradation ranging from 3% to 24%. To enhance the robustness of the models against these vulnerabilities, we investigate a straightforward yet effective mitigation strategy. Our findings highlight the need for robust defense mechanisms and comprehensive evaluations during both the development and deployment phases to ensure the resilience and reliability of automated code generation systems.

In Agentic AI, Large Language Models (LLMs) are increasingly used in the orchestration layer to coordinate multiple agents and to interact with external services, retrieval components, and shared memory. In this setting, failures are not limited to incorrect final outputs. They also arise from long-horizon interaction, stochastic decisions, and external side effects (such as API calls, database writes, and message sends). Common failures include non-termination, role drift, propagation of unsupported claims, and attacks via untrusted context or external channels. This paper presents an assurance framework for such Agentic AI systems. Executions are instrumented as Message-Action Traces (MAT) with explicit step and trace contracts. Contracts provide machine-checkable verdicts, localize the first violating step, and support deterministic replay. The framework includes stress testing, formulated as a budgeted counterexample search over bounded perturbations. It also supports structured fault injection at service, retrieval, and memory boundaries to assess containment under realistic operational faults and degraded conditions. Finally, governance is treated as a runtime component, enforcing per-agent capability limits and action mediation (allow, rewrite, block) at the language-to-action boundary. To support comparative evaluations across stochastic seeds, models, and orchestration configurations, the paper defines trace-based metrics for task success, termination reliability, contract compliance, factuality indicators, containment rate, and governance outcome distributions. More broadly, the framework is intended as a common abstraction to support testing and evaluation of multi-agent LLM systems, and to facilitate reproducible comparison across orchestration designs and configurations.

The impact of person-job fit on job satisfaction and performance is widely acknowledged, which highlights the importance of providing workers with next steps at the right time in their career. This task of predicting the next step in a career is known as career path prediction, and has diverse applications such as turnover prevention and internal job mobility. Existing methods to career path prediction rely on large amounts of private career history data to model the interactions between job titles and companies. We propose leveraging the unexplored textual descriptions that are part of work experience sections in resumes. We introduce a structured dataset of 2,164 anonymized career histories, annotated with ESCO occupation labels. Based on this dataset, we present a novel representation learning approach, CareerBERT, specifically designed for work history data. We develop a skill-based model and a text-based model for career path prediction, which achieve 35.24% and 39.61% recall@10 respectively on our dataset. Finally, we show that both approaches are complementary as a hybrid approach achieves the strongest result with 43.01% recall@10.

AI scientist systems are increasingly deployed for autonomous research, yet their academic integrity has never been systematically evaluated. We introduce SCIINTEGRITY-BENCH, the first benchmark designed around a dilemmatic evaluation paradigm: each of its 33 scenarios across 11 trap categories is constructed so that honest acknowledgment of failure is the only correct response, while task completion requires misconduct. Across 231 evaluation runs spanning 7 state-of-the-art LLMs, the overall integrity problem rate reaches 34.2%, and no model achieves zero failures. Most strikingly, across missing-data scenarios, all seven models generate synthetic data rather than acknowledging infeasibility, differing only in whether they disclose the substitution. A further prompt ablation study separates two drivers: removing explicit completion pressure sharply reduces undisclosed fabrication from 20.6% to 3.2%, while the underlying synthesis rate remains unchanged, revealing an intrinsic completion bias that persists independent of prompt-level instructions. These findings point to the absence of honest refusal as a trained disposition as the primary driver of observed failures. We release SCIINTEGRITY-BENCH at https://github.com/liuxingtong/Sci-Integrity-Bench.

We introduce a general, flexible, parametric survival modelling framework which encompasses key shapes of hazard function (constant, increasing, decreasing, up-then-down, down-then-up), various common survival distributions (log-logistic, Burr type XII, Weibull, Gompertz), and includes defective distributions (i.e., cure models). This generality is achieved using four basic distributional parameters: two scale-type parameters and two shape parameters. Generalising to covariate dependence, the scale-type regression components correspond to accelerated failure time (AFT) and proportional hazards (PH) models. Therefore, this general formulation unifies the most popular survival models which allows us to consider the practical value of possible modelling choices for survival data. Furthermore, in line with our proposed flexible baseline distribution, we advocate the use of multi-parameter regression in which more than one distributional parameter depends on covariates - rather than the usual convention of having a single covariate-dependent (scale) parameter. While many choices are available, we suggest introducing covariates through just one or other of the two scale parameters, which covers AFT and PH models, in combination with a `power' shape parameter, which allows for more complex non-AFT/non-PH effects, while the other shape parameter remains covariate-independent, and handles automatic selection of the baseline distribution. We explore inferential issues in simulations, both with and without a covariate, with particular focus on evidence concerning the need, or otherwise, to include both AFT and PH parameters. We illustrate the efficacy of our modelling framework by investigating differences between treatment groups using data from a lung cancer study and a melanoma study. Censoring is accommodated throughout.

Estimating the persuasiveness of messages is critical in various applications, from recommender systems to safety assessment of LLMs. While it is imperative to consider the target persuadee's characteristics, such as their values, experiences, and reasoning styles, there is currently no established systematic framework to optimize leveraging a persuadee's past activities (e.g., conversations) to the benefit of a persuasiveness prediction model. To address this problem, we propose a context-aware user profiling framework with two trainable components: a query generator that generates optimal queries to retrieve persuasion-relevant records from a user's history, and a profiler that summarizes these records into a profile to effectively inform the persuasiveness prediction model. Our evaluation on the ChangeMyView Reddit dataset shows consistent improvements over existing methods across multiple predictor models, raising F1 from 33% to 47% on Llama-3.3-70B-Instruct. Further analysis shows that effective user profiles are context-dependent and predictor-specific, rather than relying on static attributes or surface-level similarity. Together, these results highlight the importance of task-oriented, context-dependent user profiling for personalized persuasiveness prediction.

Recent advances in large language models (LLMs) have increased the demand for comprehensive benchmarks to evaluate their capabilities as human-like agents. Existing benchmarks, while useful, often focus on specific application scenarios, emphasizing task completion but failing to dissect the underlying skills that drive these outcomes. This lack of granularity makes it difficult to deeply discern where failures stem from. Additionally, setting up these environments requires considerable effort, and issues of unreliability and reproducibility sometimes arise, especially in interactive tasks. To address these limitations, we introduce the Massive Multitask Agent Understanding (MMAU) benchmark, featuring comprehensive offline tasks that eliminate the need for complex environment setups. It evaluates models across five domains, including teal{Tool-use}, teal{Directed Acyclic Graph (DAG) QA}, teal{Data Science and Machine Learning coding}, teal{Contest-level programming} and teal{Mathematics}, and covers five essential capabilities: orange{Understanding}, orange{Reasoning}, orange{Planning}, orange{Problem-solving}, and orange{Self-correction}. With a total of 20 meticulously designed tasks encompassing over 3K distinct prompts, MMAU provides a comprehensive framework for evaluating the strengths and limitations of LLM agents. By testing 18 representative models on MMAU, we provide deep and insightful analyses. Ultimately, MMAU not only sheds light on the capabilities and limitations of LLM agents but also enhances the interpretability of their performance. Datasets and evaluation scripts of MMAU are released at https://github.com/apple/axlearn/docs/research/mmau.

Despite growing enthusiasm for Multi-Agent Systems (MAS), where multiple LLM agents collaborate to accomplish tasks, their performance gains across popular benchmarks remain minimal compared to single-agent frameworks. This gap highlights the need to analyze the challenges hindering MAS effectiveness. In this paper, we present the first comprehensive study of MAS challenges. We analyze five popular MAS frameworks across over 150 tasks, involving six expert human annotators. We identify 14 unique failure modes and propose a comprehensive taxonomy applicable to various MAS frameworks. This taxonomy emerges iteratively from agreements among three expert annotators per study, achieving a Cohen's Kappa score of 0.88. These fine-grained failure modes are organized into 3 categories, (i) specification and system design failures, (ii) inter-agent misalignment, and (iii) task verification and termination. To support scalable evaluation, we integrate MASFT with LLM-as-a-Judge. We also explore if identified failures could be easily prevented by proposing two interventions: improved specification of agent roles and enhanced orchestration strategies. Our findings reveal that identified failures require more complex solutions, highlighting a clear roadmap for future research. We open-source our dataset and LLM annotator.

Large Language Models (LLMs) changed the way we design and interact with software systems. Their ability to process and extract information from text has drastically improved productivity in a number of routine tasks. Developers that want to include these models in their software stack, however, face a dreadful challenge: debugging LLMs' inconsistent behavior across minor variations of the prompt. We therefore introduce two metrics for classification tasks, namely sensitivity and consistency, which are complementary to task performance. First, sensitivity measures changes of predictions across rephrasings of the prompt, and does not require access to ground truth labels. Instead, consistency measures how predictions vary across rephrasings for elements of the same class. We perform an empirical comparison of these metrics on text classification tasks, using them as guideline for understanding failure modes of the LLM. Our hope is that sensitivity and consistency will be helpful to guide prompt engineering and obtain LLMs that balance robustness with performance.

Tool-using automation systems, from scripts and CI bots to agentic assistants, fail in recurring patterns. Common failures include unsafe side effects, invalid arguments, uncontrolled retries, and leakage of sensitive outputs. Many mitigations are model-centric and prompt-dependent, so they are brittle and do not generalize to non-LLM callers. We present Policy-First Tooling, a model-agnostic permission layer that mediates tool invocation through explicit constraints, risk-aware gating, recovery controls, and auditable explanations. The paper contributes a compact policy DSL, a runtime enforcement architecture with actionable rationale and fix hints, and a reproducible benchmark based on trace replay with controlled fault and misuse injection. In 225 controlled runs across five policy packs and three fault profiles, stricter packs improve violation prevention from 0.000 in P0 to 0.681 in P4, while task success drops from 0.356 to 0.067. Retry amplification decreases from 3.774 in P0 to 1.378 in P4, and leakage recall reaches 0.875 under injected secret outputs. These results make safety to utility trade-offs explicit and measurable.

Existing benchmarks for tool-using LLM agents primarily report single-run success rates and miss reliability properties required in production. We introduce ReliabilityBench, a benchmark for evaluating agent reliability across three dimensions: (i) consistency under repeated execution using pass^k, (ii) robustness to semantically equivalent task perturbations at intensity ε, and (iii) fault tolerance under controlled tool/API failures at intensity λ. ReliabilityBench contributes a unified reliability surface R(k,ε,λ), action metamorphic relations that define correctness via end-state equivalence rather than text similarity, and a chaos-engineering-style fault injection framework (timeouts, rate limits, partial responses, schema drift). We evaluate two models (Gemini 2.0 Flash, GPT-4o) and two agent architectures (ReAct, Reflexion) across four domains (scheduling, travel, customer support, e-commerce) over 1,280 episodes. Perturbations alone reduce success from 96.9% at ε=0 to 88.1% at ε=0.2. Rate limiting is the most damaging fault in ablations. ReAct is more robust than Reflexion under combined stress, and Gemini 2.0 Flash achieves comparable reliability to GPT-4o at much lower cost. ReliabilityBench provides a systematic framework for assessing production readiness of LLM agents.

Uncertainty in perception, actuation, and the environment often require multiple attempts for a robotic task to be successful. We study a class of problems providing (1) low-entropy indicators of terminal success / failure, and (2) unreliable (high-entropy) data to predict the final outcome of an ongoing task. Examples include a robot trying to connect with a charging station, parallel parking, or assembling a tightly-fitting part. The ability to restart after predicting failure early, versus simply running to failure, can significantly decrease the makespan, that is, the total time to completion, with the drawback of potentially short-cutting an otherwise successful operation. Assuming task running times to be Poisson distributed, and using a Markov Jump process to capture the dynamics of the underlying Markov Decision Process, we derive a closed form solution that predicts makespan based on the confusion matrix of the failure predictor. This allows the robot to learn failure prediction in a production environment, and only adopt a preemptive policy when it actually saves time. We demonstrate this approach using a robotic peg-in-hole assembly problem using a real robotic system. Failures are predicted by a dilated convolutional network based on force-torque data, showing an average makespan reduction from 101s to 81s (N=120, p<0.05). We posit that the proposed algorithm generalizes to any robotic behavior with an unambiguous terminal reward, with wide ranging applications on how robots can learn and improve their behaviors in the wild.

AI agents are increasingly deployed to execute important tasks. While rising accuracy scores on standard benchmarks suggest rapid progress, many agents still continue to fail in practice. This discrepancy highlights a fundamental limitation of current evaluations: compressing agent behavior into a single success metric obscures critical operational flaws. Notably, it ignores whether agents behave consistently across runs, withstand perturbations, fail predictably, or have bounded error severity. Grounded in safety-critical engineering, we provide a holistic performance profile by proposing twelve concrete metrics that decompose agent reliability along four key dimensions: consistency, robustness, predictability, and safety. Evaluating 14 agentic models across two complementary benchmarks, we find that recent capability gains have only yielded small improvements in reliability. By exposing these persistent limitations, our metrics complement traditional evaluations while offering tools for reasoning about how agents perform, degrade, and fail.

Interactive agent benchmarks face a tension between scalable construction and realistic workflow evaluation. Hand-authored tasks are expensive to extend and revise, while static prompt evaluation misses failures that only appear when agents operate over persistent state. Existing interactive benchmarks have advanced agent evaluation significantly, but most initialize tasks from clean state and do not systematically test how agents handle pre-existing partial, stale, or conflicting artifacts. We present ClawForge, a generator-backed benchmark framework for executable command-line workflows under state conflict. The framework compiles scenario templates, grounded slots, initialized state, reference trajectories, and validators into reproducible task specifications, and evaluates agents step by step over persistent workflow surfaces using normalized end state and observable side effects rather than exact trajectory matching. We instantiate this framework as the ClawForge-Bench (17 scenarios, 6 ability categories). Results across seven frontier models show that the best model reaches only 45.3% strict accuracy, wrong-state replacement remains below 17\% for all models, and the widest model separation (17% to 90%) is driven by whether agents inspect existing state before acting. Partial-credit and step-efficiency analyses further reveal that many failures are near-miss closures rather than early breakdowns, and that models exhibit qualitatively different failure styles under state conflict.

Code agents can autonomously resolve GitHub issues, yet when they fail, current evaluation provides no visibility into where or why. Metrics such as Pass@1 collapse an entire execution into a single binary outcome, making it difficult to identify where and why the agent went wrong. To address this limitation, we introduce TRAJEVAL, a diagnostic framework that decomposes agent trajectories into three interpretable stages: search (file localization), read (function comprehension), and edit (modification targeting). For each stage, we compute precision and recall by comparing against reference patches. Analyzing 16,758 trajectories across three agent architectures and seven models, we find universal inefficiencies (all agents examine approximately 22x more functions than necessary) yet distinct failure modes: GPT-5 locates relevant code but targets edits incorrectly, while Qwen-32B fails at file discovery entirely. We validate that these diagnostics are predictive, achieving model-level Pass@1 prediction within 0.87-2.1% MAE, and actionable: real-time feedback based on trajectory signals improves two state-of-the-art models by 2.2-4.6 percentage points while reducing costs by 20-31%. These results demonstrate that our framework not only provides a more fine-grained analysis of agent behavior, but also translates diagnostic signals into tangible performance gains. More broadly, TRAJEVAL transforms agent evaluation beyond outcome-based benchmarking toward mechanism-driven diagnosis of agent success and failure.

Large language models (LLMs) are increasingly explored as scalable tools for mental health counseling, yet evaluating their safety remains challenging due to the interactional and context-dependent nature of clinical harm. Existing evaluation frameworks predominantly assess isolated responses using coarse-grained taxonomies or static datasets, limiting their ability to diagnose how harms emerge and accumulate over multi-turn counseling interactions. In this work, we introduce R-MHSafe, a role-aware mental health safety taxonomy that characterizes clinically significant harm in terms of the interactional roles an AI counselor adopts, including perpetrator, instigator, facilitator, or enabler, combined with clinically grounded harm categories. Then, we propose MHSafeEval, a closed-loop, agent-based evaluation framework that formulates safety assessment as trajectory-level discovery of harm through adversarial multi-turn interactions, guided by role-aware modeling. Using R-MHSafe and MHSafeEval, we conduct a large-scale evaluation across state-of-the-art LLMs. Our results reveal substantial role-dependent and cumulative safety failures that are systematically missed by existing static benchmarks, and show that our framework significantly improves failure-mode coverage and diagnostic granularity.

Safety alignment in Large Language Models is critical for healthcare; however, reliance on binary refusal boundaries often results in over-refusal of benign queries or unsafe compliance with harmful ones. While existing benchmarks measure these extremes, they fail to evaluate Safe Completion: the model's ability to maximise helpfulness on dual-use or borderline queries by providing safe, high-level guidance without crossing into actionable harm. We introduce Health-ORSC-Bench, the first large-scale benchmark designed to systematically measure Over-Refusal and Safe Completion quality in healthcare. Comprising 31,920 benign boundary prompts across seven health categories (e.g., self-harm, medical misinformation), our framework uses an automated pipeline with human validation to test models at varying levels of intent ambiguity. We evaluate 30 state-of-the-art LLMs, including GPT-5 and Claude-4, revealing a significant tension: safety-optimised models frequently refuse up to 80\% of "Hard" benign prompts, while domain-specific models often sacrifice safety for utility. Our findings demonstrate that model family and size significantly influence calibration: larger frontier models (e.g., GPT-5, Llama-4) exhibit "safety-pessimism" and higher over-refusal than smaller or MoE-based counterparts (e.g., Qwen-3-Next), highlighting that current LLMs struggle to balance refusal and compliance. Health-ORSC-Bench provides a rigorous standard for calibrating the next generation of medical AI assistants toward nuanced, safe, and helpful completions. The code and data will be released upon acceptance. red{Warning: Some contents may include toxic or undesired contents.}

Medication reconciliation at clinical handoffs is a high-stakes, error-prone process. Large language models are increasingly proposed to assist with this task using FHIR-structured patient records, but a fundamental and largely unstudied variable is how the FHIR data is serialised before being passed to the model. We present the first systematic comparison of four FHIR serialisation strategies (Raw JSON, Markdown Table, Clinical Narrative, and Chronological Timeline) across five open-weight models (Phi-3.5-mini, Mistral-7B, BioMistral-7B, Llama-3.1-8B, Llama-3.3-70B) on a controlled benchmark of 200 synthetic patients, totalling 4,000 inference runs. We find that serialisation strategy has a large, statistically significant effect on performance for models up to 8B parameters: Clinical Narrative outperforms Raw JSON by up to 19 F1 points for Mistral-7B (r = 0.617, p < 10^{-10}). This advantage reverses at 70B, where Raw JSON achieves the best mean F1 of 0.9956. In all 20 model and strategy combinations, mean precision exceeds mean recall: omission is the dominant failure mode, with models more often missing an active medication than fabricating one, which changes how clinical safety auditing priorities should be set. Smaller models plateau at roughly 7-10 concurrent active medications, leaving polypharmacy patients, the patients most at risk from reconciliation errors, systematically underserved. BioMistral-7B, a domain-pretrained model without instruction tuning, produces zero usable output in all conditions, showing that domain pretraining alone is not sufficient for structured extraction. These results offer practical, evidence-based format recommendations for clinical LLM deployment: Clinical Narrative for models up to 8B, Raw JSON for 70B and above. The complete pipeline is reproducible on open-source tools running on an AWS g6e.xlarge instance (NVIDIA L40S, 48 GB VRAM).

Multi-agent systems (MAS) are increasingly capable of tackling complex real-world tasks, yet their reliance on inter-agent coordination, tool use, and long-horizon reasoning makes error recognition particularly challenging. Minor errors can propagate across agents, escalating into task failures while producing long, intertwined execution trajectories that impose significant costs for both human developers and automated systems to debug and analyze. Our key insight is that, despite surface differences in failure trajectories (e.g., logs), MAS errors often recur with similar structural patterns. This paper presents CORRECT, the first lightweight, training-free framework that leverages an online cache of distilled error schemata to recognize and transfer knowledge of failure structures across new requests. This cache-based reuse allows LLMs to perform targeted error localization at inference time, avoiding the need for expensive retraining while adapting to dynamic MAS deployments in subseconds. To support rigorous study in this domain, we also introduce CORRECT-Error, a large-scale dataset of over 2,000 annotated trajectories collected through a novel error-injection pipeline guided by real-world distributions, and further validated through human evaluation to ensure alignment with natural failure patterns. Experiments across seven diverse MAS applications show that CORRECT improves step-level error localization up to 19.8% over existing advances while at near-zero overhead, substantially narrowing the gap between automated and human-level error recognition.

Failure mode and effects analysis (FMEA) is a critical tool for mitigating potential failures, particular during ramp-up phases of new products. However, its effectiveness is often limited by the missing reasoning capabilities of the FMEA tools, which are usually tabular structured. Meanwhile, large language models (LLMs) offer novel prospects for fine-tuning on custom datasets for reasoning within FMEA contexts. However, LLMs face challenges in tasks that require factual knowledge, a gap that retrieval-augmented generation (RAG) approaches aim to fill. RAG retrieves information from a non-parametric data store and uses a language model to generate responses. Building on this idea, we propose to advance the non-parametric data store with a knowledge graph (KG). By enhancing the RAG framework with a KG, our objective is to leverage analytical and semantic question-answering capabilities on FMEA data. This paper contributes by presenting a new ontology for FMEA observations, an algorithm for creating vector embeddings from the FMEA KG, and a KG enhanced RAG framework. Our approach is validated through a human study and we measure the performance of the context retrieval recall and precision.

We report an exploratory red-teaming study of autonomous language-model-powered agents deployed in a live laboratory environment with persistent memory, email accounts, Discord access, file systems, and shell execution. Over a two-week period, twenty AI researchers interacted with the agents under benign and adversarial conditions. Focusing on failures emerging from the integration of language models with autonomy, tool use, and multi-party communication, we document eleven representative case studies. Observed behaviors include unauthorized compliance with non-owners, disclosure of sensitive information, execution of destructive system-level actions, denial-of-service conditions, uncontrolled resource consumption, identity spoofing vulnerabilities, cross-agent propagation of unsafe practices, and partial system takeover. In several cases, agents reported task completion while the underlying system state contradicted those reports. We also report on some of the failed attempts. Our findings establish the existence of security-, privacy-, and governance-relevant vulnerabilities in realistic deployment settings. These behaviors raise unresolved questions regarding accountability, delegated authority, and responsibility for downstream harms, and warrant urgent attention from legal scholars, policymakers, and researchers across disciplines. This report serves as an initial empirical contribution to that broader conversation.

Run the same LLM agent on the same task twice: do you get the same behavior? We find the answer is often no. In a study of 3,000 agent runs across three models (Llama 3.1 70B, GPT-4o, and Claude Sonnet 4.5) on HotpotQA, we observe that ReAct-style agents produce 2.0--4.2 distinct action sequences per 10 runs on average, even with identical inputs. More importantly, this variance predicts failure: tasks with consistent behavior (leq2 unique paths) achieve 80--92% accuracy, while highly inconsistent tasks (geq6 unique paths) achieve only 25--60%, a 32--55 percentage point gap depending on model. We trace variance to early decisions: 69% of divergence occurs at step 2, the first search query. Our results suggest that monitoring behavioral consistency during execution could enable early error detection and improve agent reliability.

Software maintenance faces a persistent challenge with crash bugs, especially across diverse release channels catering to distinct user bases. Nightly builds, favoured by enthusiasts, often reveal crashes that are cheaper to fix but may differ significantly from those in stable releases. In this paper, we emphasize the need for a data-driven solution to predict the impact of crashes happening on nightly channels once they are released to stable channels. We also list the challenges that need to be considered when approaching this problem.

Large Language Model (LLM) agents, which integrate planning, memory, reflection, and tool-use modules, have shown promise in solving complex, multi-step tasks. Yet their sophisticated architectures amplify vulnerability to cascading failures, where a single root-cause error propagates through subsequent decisions, leading to task failure. Current systems lack a framework that can comprehensively understand agent error in a modular and systemic way, and therefore fail to detect these errors accordingly. We address this gap with three contributions. First, we introduce the AgentErrorTaxonomy, a modular classification of failure modes spanning memory, reflection, planning, action, and system-level operations. Second, we construct AgentErrorBench, the first dataset of systematically annotated failure trajectories from ALFWorld, GAIA, and WebShop, grounding error analysis in real-world agent rollouts. Third, we propose AgentDebug, a debugging framework that isolates root-cause failures and provides corrective feedback, enabling agents to recover and iteratively improve. Experiments on AgentErrorBench show that AgentDebug achieves 24% higher all-correct accuracy and 17% higher step accuracy compared to the strongest baseline. Beyond detection, the targeted feedback generated by AgentDebug enables LLM agents to iteratively recover from failures, yielding up to 26% relative improvements in task success across ALFWorld, GAIA, and WebShop. These results establish principled debugging as a pathway to more reliable and adaptive LLM agents. The code and data will be available at https://github.com/ulab-uiuc/AgentDebug

Personal AI agents like OpenClaw run with elevated privileges on users' local machines, where a single successful prompt injection can leak credentials, redirect financial transactions, or destroy files. This threat goes well beyond conventional text-level jailbreaks, yet existing safety evaluations fall short: most test models in isolated chat settings, rely on synthetic environments, and do not account for how the agent framework itself shapes safety outcomes. We introduce CLAWSAFETY, a benchmark of 120 adversarial test scenarios organized along three dimensions (harm domain, attack vector, and harmful action type) and grounded in realistic, high-privilege professional workspaces spanning software engineering, finance, healthcare, law, and DevOps. Each test case embeds adversarial content in one of three channels the agent encounters during normal work: workspace skill files, emails from trusted senders, and web pages. We evaluate five frontier LLMs as agent backbones, running 2,520 sandboxed trials across all configurations. Attack success rates (ASR) range from 40\% to 75\% across models and vary sharply by injection vector, with skill instructions (highest trust) consistently more dangerous than email or web content. Action-trace analysis reveals that the strongest model maintains hard boundaries against credential forwarding and destructive actions, while weaker models permit both. Cross-scaffold experiments on three agent frameworks further demonstrate that safety is not determined by the backbone model alone but depends on the full deployment stack, calling for safety evaluation that treats model and framework as joint variables. Code and data will be available at: https://weibowen555.github.io/ClawSafety/.

Recent advances in robotic manipulation have integrated low-level robotic control into Vision-Language Models (VLMs), extending them into Vision-Language-Action (VLA) models. Although state-of-the-art VLAs achieve strong performance in downstream robotic applications, supported by large-scale crowd-sourced robot training data, they still inevitably encounter failures during execution. Enabling robots to reason and recover from unpredictable and abrupt failures remains a critical challenge. Existing robotic manipulation datasets, collected in either simulation or the real world, primarily provide only ground-truth trajectories, leaving robots unable to recover once failures occur. Moreover, the few datasets that address failure detection typically offer only textual explanations, which are difficult to utilize directly in VLA models. To address this gap, we introduce FailSafe, a novel failure generation and recovery system that automatically produces diverse failure cases paired with executable recovery actions. FailSafe can be seamlessly applied to any manipulation task in any simulator, enabling scalable creation of failure action data. To demonstrate its effectiveness, we fine-tune LLaVa-OneVision-7B (LLaVa-OV-7B) to build FailSafe-VLM. Experimental results show that FailSafe-VLM successfully helps robotic arms detect and recover from potential failures, improving the performance of three state-of-the-art VLA models (pi0-FAST, OpenVLA, OpenVLA-OFT) by up to 22.6% on average across several tasks in Maniskill. Furthermore, FailSafe-VLM could generalize across different spatial configurations, camera viewpoints, object and robotic embodiments. We plan to release the FailSafe code to the community.

Computer-use agents (CUAs) automate on-screen work, as illustrated by GPT-5.4 and Claude. Yet their reliability on complex, low-frequency interactions is still poor, limiting user trust. Our analysis of failure cases from advanced models suggests a long-tail pattern in GUI operations, where a relatively small fraction of complex and diverse interactions accounts for a disproportionate share of task failures. We hypothesize that this issue largely stems from the scarcity of data for complex interactions. To address this problem, we propose a new benchmark CUActSpot for evaluating models' capabilities on complex interactions across five modalities: GUI, text, table, canvas, and natural image, as well as a variety of actions (click, drag, draw, etc.), covering a broader range of interaction types than prior click-centric benchmarks that focus mainly on GUI widgets. We also design a renderer-based data-synthesis pipeline: scenes are automatically generated for each modality, screenshots and element coordinates are recorded, and an LLM produces matching instructions and action traces. After training on this corpus, our Phi-Ground-Any-4B outperforms open-source models with fewer than 32B parameters. We will release our benchmark, data, code, and models at https://github.com/microsoft/Phi-Ground.git

Evaluating personalized recommendations remains a central challenge, especially in long-form audio domains like podcasts, where traditional offline metrics suffer from exposure bias and online methods such as A/B testing are costly and operationally constrained. In this paper, we propose a novel framework that leverages Large Language Models (LLMs) as offline judges to assess the quality of podcast recommendations in a scalable and interpretable manner. Our two-stage profile-aware approach first constructs natural-language user profiles distilled from 90 days of listening history. These profiles summarize both topical interests and behavioral patterns, serving as compact, interpretable representations of user preferences. Rather than prompting the LLM with raw data, we use these profiles to provide high-level, semantically rich context-enabling the LLM to reason more effectively about alignment between a user's interests and recommended episodes. This reduces input complexity and improves interpretability. The LLM is then prompted to deliver fine-grained pointwise and pairwise judgments based on the profile-episode match. In a controlled study with 47 participants, our profile-aware judge matched human judgments with high fidelity and outperformed or matched a variant using raw listening histories. The framework enables efficient, profile-aware evaluation for iterative testing and model selection in recommender systems.

The maintenance risks of open source software (OSS) projects pose significant threats to the quality, security, and resilience of modern software supply chains. While prior research has proposed diverse approaches for predicting OSS maintenance risk -- leveraging signals ranging from surface features (e.g., stars, commits) to social network analyses and behavioral patterns -- existing methods often suffer from ambiguous operational definitions, limited interpretability, and datasets of insufficient scale or generalizability. In this work, we introduce ``maintenance cessation'', grounded in both explicit archival status and rigorous semantic analysis of project documentation. Building on this foundation, we curate a large-scale, longitudinal dataset of 115,466 GitHub repositories -- encompassing 57,733 confirmed cessation events -- complemented by comprehensive, timeline-based behavioral features. We propose an integrated, multi-perspective feature framework for predicting maintenance cessation, systematically combining user-centric features, maintainer-centric features and project evolution features. AFT survival analysis demonstrates a high C-index (0.846), substantially outperforming models relying only on surface features. Feature ablation and SHAP analysis further confirm the effectiveness and interpretability of our approach. Finally, we demonstrate real-world applicability by deploying a GBSA classifier in the openEuler ecosystem for proactive package risk screening. Our work establishes a scalable, interpretable foundation for maintenance-risk prediction, enabling reproducible risk management across large-scale open source ecosystems.

Rubric-based evaluation is widely used in LLM benchmarks and training pipelines for open-ended, less verifiable tasks. While prior work has demonstrated the effectiveness of rubrics using downstream signals such as reinforcement learning outcomes, there remains no principled way to diagnose how a rubric itself fails from such aggregated or downstream signals alone. To address this gap, we introduce RIFT: RubrIc Failure mode Taxonomy, a taxonomy for systematically characterizing failure modes in rubric composition and design. RIFT consists of eight failure modes organized into three high-level categories: Reliability Failures, Content Validity Failures, and Consequential Validity Failures. RIFT is developed using grounded theory by iteratively annotating rubrics drawn from five diverse data sources spanning general instruction following, code generation, creative writing, and expert-level deep research, until no new failure modes are identified. We evaluate the consistency of the taxonomy by measuring agreement among independent human annotators, observing fair agreement overall (87% pairwise agreement and 0.64 average Cohen's kappa). Finally, to support scalable diagnosis, we propose automated rubric quality metrics and show that they align with human failure-mode annotations, achieving up to 0.925 F1.

Large language models (LLMs) are being rapidly integrated into decision-support tools, automation workflows, and AI-enabled software systems. However, their behavior in production environments remains poorly understood, and their failure patterns differ fundamentally from those of traditional machine learning models. This paper presents a system-level taxonomy of fifteen hidden failure modes that arise in real-world LLM applications, including multi-step reasoning drift, latent inconsistency, context-boundary degradation, incorrect tool invocation, version drift, and cost-driven performance collapse. Using this taxonomy, we analyze the growing gap in evaluation and monitoring practices: existing benchmarks measure knowledge or reasoning but provide little insight into stability, reproducibility, drift, or workflow integration. We further examine the production challenges associated with deploying LLMs - including observability limitations, cost constraints, and update-induced regressions - and outline high-level design principles for building reliable, maintainable, and cost-aware LLM systems. Finally, we outline high-level design principles for building reliable, maintainable, and cost-aware LLM-based systems. By framing LLM reliability as a system-engineering problem rather than a purely model-centric one, this work provides an analytical foundation for future research on evaluation methodology, AI system robustness, and dependable LLM deployment.

We introduce Vox-Profile, a comprehensive benchmark to characterize rich speaker and speech traits using speech foundation models. Unlike existing works that focus on a single dimension of speaker traits, Vox-Profile provides holistic and multi-dimensional profiles that reflect both static speaker traits (e.g., age, sex, accent) and dynamic speech properties (e.g., emotion, speech flow). This benchmark is grounded in speech science and linguistics, developed with domain experts to accurately index speaker and speech characteristics. We report benchmark experiments using over 15 publicly available speech datasets and several widely used speech foundation models that target various static and dynamic speaker and speech properties. In addition to benchmark experiments, we showcase several downstream applications supported by Vox-Profile. First, we show that Vox-Profile can augment existing speech recognition datasets to analyze ASR performance variability. Vox-Profile is also used as a tool to evaluate the performance of speech generation systems. Finally, we assess the quality of our automated profiles through comparison with human evaluation and show convergent validity. Vox-Profile is publicly available at: https://github.com/tiantiaf0627/vox-profile-release.