Daily Papers

Flow matching has emerged as a scalable paradigm for training high-quality generative models, but sampling from the learned probability flow requires many network evaluations. Distillation can reduce this cost to one or a few evaluations; however, one-step generation often sacrifices quality, making few-step generation the practical operating regime. Existing few-step methods perform their iterative computation along the probability flow and therefore require a fixed, manually chosen timestep discretization. This discretization is often chosen heuristically and is expensive to tune; it may also be restrictive when refinement difficulty differs across samples or spatial locations. We introduce data-space iteration, a few-step generation framework that removes flow discretization altogether. Starting from noise, a shared generator directly refines its prediction in data space, with every iteration trained to produce the best sample permitted by its capacity. Our formulation integrates with distribution matching distillation (DMD) with minimal changes, enabling a controlled comparison between iteration methods under matched training settings. On class-conditional ImageNet 256x256, data-space iteration outperforms standard discretization baselines and matches or improves upon variants selected through schedule search, without requiring schedule-specific training. These results show that data-space iteration provides a simple and effective alternative to discretized flow-space iteration for fast generation.

Few-step diffusion or flow-based generative models typically distill a velocity-predicting teacher into a student that predicts a shortcut towards denoised data. This format mismatch has led to complex distillation procedures that often suffer from a quality-diversity trade-off. To address this, we propose policy-based flow models (pi-Flow). pi-Flow modifies the output layer of a student flow model to predict a network-free policy at one timestep. The policy then produces dynamic flow velocities at future substeps with negligible overhead, enabling fast and accurate ODE integration on these substeps without extra network evaluations. To match the policy's ODE trajectory to the teacher's, we introduce a novel imitation distillation approach, which matches the policy's velocity to the teacher's along the policy's trajectory using a standard ell_2 flow matching loss. By simply mimicking the teacher's behavior, pi-Flow enables stable and scalable training and avoids the quality-diversity trade-off. On ImageNet 256^2, it attains a 1-NFE FID of 2.85, outperforming MeanFlow of the same DiT architecture. On FLUX.1-12B and Qwen-Image-20B at 4 NFEs, pi-Flow achieves substantially better diversity than state-of-the-art few-step methods, while maintaining teacher-level quality.

Distribution Matching Distillation (DMD) is a powerful acceleration paradigm, yet its stability is often compromised in Forbidden Zone, regions where the real teacher provides unreliable guidance while the fake teacher exerts insufficient repulsive force. In this work, we propose a unified optimization framework that reinterprets prior art as implicit strategies to avoid these corrupted regions. Based on this insight, we introduce Adaptive Matching Distillation (AMD), a self-correcting mechanism that utilizes reward proxies to explicitly detect and escape Forbidden Zones. AMD dynamically prioritizes corrective gradients via structural signal decomposition and introduces Repulsive Landscape Sharpening to enforce steep energy barriers against failure mode collapse. Extensive experiments across image and video generation tasks (e.g., SDXL, Wan2.1) and rigorous benchmarks (e.g., VBench, GenEval) demonstrate that AMD significantly enhances sample fidelity and training robustness. For instance, AMD improves the HPSv2 score on SDXL from 30.64 to 31.25, outperforming state-of-the-art baselines. These findings validate that explicitly rectifying optimization trajectories within Forbidden Zones is essential for pushing the performance ceiling of few-step generative models.

Flow matching has recently emerged as a strong paradigm for state-of-the-art text-to-image (T2I) generation, enabling high-quality generation with a small number of sampling steps. As these models are increasingly integrated into real-world applications, ensuring safe and non-sensitive content generation has become a critical requirement. However, adapting safety and concept removal methods to this new generation framework remains an open challenge. Specifically, prior methods largely rely on iterative trajectory steering across a number of denoising steps or on CLIP-centric prompt embedding manipulation. These design assumptions pose fundamental bottlenecks for safety in flow matching-based T2I generation, where limited sampling steps constrain iterative correction and modern context-aware text encoders diminish the effectiveness of embedding-level interventions. In this paper, we propose VESFlow, a training-free safety method tailored to flow matching with extremely few sampling steps. Leveraging the fact that flow matching models learn the marginal velocity, we directly edit the velocity field via a safe-conditional posterior. VESFlow steers the trajectory toward safe outputs while leaving the conditioning prompt unchanged. Building on the observation that VESFlow leaves outputs unchanged under benign prompts, we further introduce a risk score-based filtering that bypasses velocity editing to reduce computational cost while preserving benign prompt generation. Based on this filtering, we propose VESFlow+, a stronger variant of VESFlow that not only edits the velocity toward the safe direction, but also pushes it away from the unsafe direction. Experimental results show that VESFlow+ removes the target concept, reducing the attack success rate by NudeNet to 6.3% on Ring-A-Bell and 6.8% on MMA-Diffusion on the 4-step MeanFlow model, while preserving fidelity on benign prompts.

Diffusion probabilistic models have shown significant progress in video generation; however, their computational efficiency is limited by the large number of sampling steps required. Reducing sampling steps often compromises video quality or generation diversity. In this work, we introduce a distillation method that combines variational score distillation and consistency distillation to achieve few-step video generation, maintaining both high quality and diversity. We also propose a latent reward model fine-tuning approach to further enhance video generation performance according to any specified reward metric. This approach reduces memory usage and does not require the reward to be differentiable. Our method demonstrates state-of-the-art performance in few-step generation for 10-second videos (128 frames at 12 FPS). The distilled student model achieves a score of 82.57 on VBench, surpassing the teacher model as well as baseline models Gen-3, T2V-Turbo, and Kling. One-step distillation accelerates the teacher model's diffusion sampling by up to 278.6 times, enabling near real-time generation. Human evaluations further validate the superior performance of our 4-step student models compared to teacher model using 50-step DDIM sampling.

We introduce BézierFlow, a lightweight training approach for few-step generation with pretrained diffusion and flow models. BézierFlow achieves a 2-3x performance improvement for sampling with leq 10 NFEs while requiring only 15 minutes of training. Recent lightweight training approaches have shown promise by learning optimal timesteps, but their scope remains restricted to ODE discretizations. To broaden this scope, we propose learning the optimal transformation of the sampling trajectory by parameterizing stochastic interpolant (SI) schedulers. The main challenge lies in designing a parameterization that satisfies critical desiderata, including boundary conditions, differentiability, and monotonicity of the SNR. To effectively meet these requirements, we represent scheduler functions as Bézier functions, where control points naturally enforce these properties. This reduces the problem to learning an ordered set of points in the time range, while the interpretation of the points changes from ODE timesteps to Bézier control points. Across a range of pretrained diffusion and flow models, BézierFlow consistently outperforms prior timestep-learning methods, demonstrating the effectiveness of expanding the search space from discrete timesteps to Bézier-based trajectory transformations.

Real-time interactive video generation requires low-latency, streaming, and controllable rollout. Existing autoregressive (AR) diffusion distillation methods have achieved strong results in the chunk-wise 4-step regime by distilling bidirectional base models into few-step AR students, but they remain limited by coarse response granularity and non-negligible sampling latency. In this paper, we study a more aggressive setting: frame-wise autoregression with only 1--2 sampling steps. In this regime, we identify the initialization of a few-step AR student as the key bottleneck: existing strategies are either target-misaligned, incapable of few-step generation, or too costly to scale. We propose Causal Forcing++, a principled and scalable pipeline that uses causal consistency distillation (causal CD) for few-step AR initialization. The core idea is that causal CD learns the same AR-conditional flow map as causal ODE distillation, but obtains supervision from a single online teacher ODE step between adjacent timesteps, avoiding the need to precompute and store full PF-ODE trajectories. This makes the initialization both more efficient and easier to optimize. The resulting pipeline, \ours, surpasses the SOTA 4-step chunk-wise Causal Forcing under the \textbf{frame-wise 2-step setting} by 0.1 in VBench Total, 0.3 in VBench Quality, and 0.335 in VisionReward, while reducing first-frame latency by 50\% and Stage 2 training cost by sim4times. We further extend the pipeline to action-conditioned world model generation in the spirit of Genie3. Project Page: https://github.com/thu-ml/Causal-Forcing and https://github.com/shengshu-ai/minWM .

Video generation has recently emerged as a central task in the field of generative AI. However, the substantial computational cost inherent in video synthesis makes model distillation a critical technique for efficient deployment. Despite its significance, there is a scarcity of methods specifically designed for video diffusion models. Prevailing approaches often directly adapt image distillation techniques, which frequently lead to artifacts such as oversaturation, temporal inconsistency, and mode collapse. To address these challenges, we propose a novel distillation framework tailored specifically for video diffusion models. Its core innovations include: (1) an adaptive regression loss that dynamically adjusts spatial supervision weights to prevent artifacts arising from excessive distribution shifts; (2) a temporal regularization loss to counteract temporal collapse, promoting smooth and physically plausible sampling trajectories; and (3) an inference-time frame interpolation strategy that reduces sampling overhead while preserving perceptual quality. Extensive experiments and ablation studies on the VBench and VBench2 benchmarks demonstrate that our method achieves stable few-step video synthesis, significantly enhancing perceptual fidelity and motion realism. It consistently outperforms existing distillation baselines across multiple metrics.

Efficient text-to-image generation requires both reinforcement-learning (RL)-based reward alignment and few-step distillation, yet these procedures are typically performed sequentially, increasing training cost and risking the loss of reward gains during compression. We take an RL-native perspective: diffusion RL already generates reward-scored finite-step trajectories, whose intermediate states provide distillation supervision. Based on this insight, we propose REST (Reward-Enhanced Scored-Trajectory Distillation), a single-stage co-training framework in which a decoupled student learns from the evolving RL teacher's trajectories without changing teacher optimization. Advantage-Modulated Distillation (AMD) transforms rollout advantages into signed weights, strengthening imitation of preferred trajectories and aligning distillation priorities with task value. The resulting framework is general and lightweight, requires no extra image rollouts, no separate distillation dataset, and no adversarial training. Experiments on compositional generation, visual text rendering, and human-preference alignment demonstrate competitive few-step, CFG-free generation with RAM or DiffusionNFT teachers. With only four sampling steps, REST-RAM achieves a DrawBench PickScore of 23.97, outperforming both the 40-step RAM teacher (23.95) and RTDMD (23.71).

Accelerating diffusion model sampling is crucial for efficient AIGC deployment. While diffusion distillation methods -- based on distribution matching and trajectory matching -- reduce sampling to as few as one step, they fall short on complex tasks like text-to-image generation. Few-step generation offers a better balance between speed and quality, but existing approaches face a persistent trade-off: distribution matching lacks flexibility for multi-step sampling, while trajectory matching often yields suboptimal image quality. To bridge this gap, we propose learning few-step diffusion models by Trajectory Distribution Matching (TDM), a unified distillation paradigm that combines the strengths of distribution and trajectory matching. Our method introduces a data-free score distillation objective, aligning the student's trajectory with the teacher's at the distribution level. Further, we develop a sampling-steps-aware objective that decouples learning targets across different steps, enabling more adjustable sampling. This approach supports both deterministic sampling for superior image quality and flexible multi-step adaptation, achieving state-of-the-art performance with remarkable efficiency. Our model, TDM, outperforms existing methods on various backbones, such as SDXL and PixArt-alpha, delivering superior quality and significantly reduced training costs. In particular, our method distills PixArt-alpha into a 4-step generator that outperforms its teacher on real user preference at 1024 resolution. This is accomplished with 500 iterations and 2 A800 hours -- a mere 0.01% of the teacher's training cost. In addition, our proposed TDM can be extended to accelerate text-to-video diffusion. Notably, TDM can outperform its teacher model (CogVideoX-2B) by using only 4 NFE on VBench, improving the total score from 80.91 to 81.65. Project page: https://tdm-t2x.github.io/

Few-step generation has been a long-standing goal, with recent one-step generation methods exemplified by MeanFlow achieving remarkable results. Existing research on MeanFlow primarily focuses on class-to-image generation. However, an intuitive yet unexplored direction is to extend the condition from fixed class labels to flexible text inputs, enabling richer content creation. Compared to the limited class labels, text conditions pose greater challenges to the model's understanding capability, necessitating the effective integration of powerful text encoders into the MeanFlow framework. Surprisingly, although incorporating text conditions appears straightforward, we find that integrating powerful LLM-based text encoders using conventional training strategies results in unsatisfactory performance. To uncover the underlying cause, we conduct detailed analyses and reveal that, due to the extremely limited number of refinement steps in the MeanFlow generation, such as only one step, the text feature representations are required to possess sufficiently high discriminability. This also explains why discrete and easily distinguishable class features perform well within the MeanFlow framework. Guided by these insights, we leverage a powerful LLM-based text encoder validated to possess the required semantic properties and adapt the MeanFlow generation process to this framework, resulting in efficient text-conditioned synthesis for the first time. Furthermore, we validate our approach on the widely used diffusion model, demonstrating significant generation performance improvements. We hope this work provides a general and practical reference for future research on text-conditioned MeanFlow generation. The code is available at https://github.com/AMAP-ML/EMF.

Few-step diffusion distillation has become increasingly mature for 4-8-step generation, yet pushing further to 2 steps remains challenging. In this work, we introduce Z-Image Turbo++, a high-quality 2-step image generation model distilled from the 8-step Z-Image Turbo teacher. Our method addresses the central bottlenecks of increased task difficulty and limited model capacity in 2-step generation through three simple but effective design choices tailored to this regime. First, we propose Distribution-Aligned Adversarial Learning, which uses teacher-generated images rather than external real images as real samples for GAN training, providing a more attainable and informative adversarial target. Second, we adopt Step-Decoupled Parameterization, assigning independent model parameters to the two denoising steps to better match their distinct capacity demands. Third, we perform End-to-End Training with Iterative Regularization, allowing the first step to receive gradients from final image quality while preserving a meaningful intermediate generation through an explicit step-1 loss. Together, these designs substantially narrow the quality gap between 2-step and 8-step generation in both qualitative and quantitative evaluations, highlighting the potential of carefully tailored distillation strategies for improving the quality-efficiency trade-off in few-step generation.

Diffusion distillation has emerged as a promising strategy for accelerating text-to-image (T2I) diffusion models by distilling a pretrained score network into a one- or few-step generator. While existing methods have made notable progress, they often rely on real or teacher-synthesized images to perform well when distilling high-resolution T2I diffusion models such as Stable Diffusion XL (SDXL), and their use of classifier-free guidance (CFG) introduces a persistent trade-off between text-image alignment and generation diversity. We address these challenges by optimizing Score identity Distillation (SiD) -- a data-free, one-step distillation framework -- for few-step generation. Backed by theoretical analysis that justifies matching a uniform mixture of outputs from all generation steps to the data distribution, our few-step distillation algorithm avoids step-specific networks and integrates seamlessly into existing pipelines, achieving state-of-the-art performance on SDXL at 1024x1024 resolution. To mitigate the alignment-diversity trade-off when real text-image pairs are available, we introduce a Diffusion GAN-based adversarial loss applied to the uniform mixture and propose two new guidance strategies: Zero-CFG, which disables CFG in the teacher and removes text conditioning in the fake score network, and Anti-CFG, which applies negative CFG in the fake score network. This flexible setup improves diversity without sacrificing alignment. Comprehensive experiments on SD1.5 and SDXL demonstrate state-of-the-art performance in both one-step and few-step generation settings, along with robustness to the absence of real images. Our efficient PyTorch implementation, along with the resulting one- and few-step distilled generators, will be released publicly as a separate branch at https://github.com/mingyuanzhou/SiD-LSG.

We propose a unified, few-step generative modeling framework based on cumulative flow maps for long-range transport in probability space, inspired by flow-map techniques for physical transport and dynamics. At its core is a cumulative-flow abstraction that connects local, instantaneous updates with finite-time transport, enabling generative models to reason about global state transitions. This perspective yields a unified few-step framework built on cumulative transport and cumulative parameterization that applies broadly to existing diffusion- and flow-based models without being tied to a specific prediction instantiation. Our formulation supports few-step and even one-step generation while preserving synthesis quality, requiring only minimal changes to time embeddings and training objectives, and no increase in model capacity. We demonstrate its effectiveness across diverse tasks, including image generation, geometric distribution modeling, joint prediction, and SDF generation, with reduced inference cost.

Recent advances in large multi-modal generative models have demonstrated impressive capabilities in multi-modal generation, including image and video generation. These models are typically built upon multi-step frameworks like diffusion and flow matching, which inherently limits their inference efficiency (requiring 40-100 Number of Function Evaluations (NFEs)). While various few-step methods aim to accelerate the inference, existing solutions have clear limitations. Prominent distillation-based methods, such as progressive and consistency distillation, either require an iterative distillation procedure or show significant degradation at very few steps (< 4-NFE). Meanwhile, integrating adversarial training into distillation (e.g., DMD/DMD2 and SANA-Sprint) to enhance performance introduces training instability, added complexity, and high GPU memory overhead due to the auxiliary trained models. To this end, we propose TwinFlow, a simple yet effective framework for training 1-step generative models that bypasses the need of fixed pretrained teacher models and avoids standard adversarial networks during training, making it ideal for building large-scale, efficient models. On text-to-image tasks, our method achieves a GenEval score of 0.83 in 1-NFE, outperforming strong baselines like SANA-Sprint (a GAN loss-based framework) and RCGM (a consistency-based framework). Notably, we demonstrate the scalability of TwinFlow by full-parameter training on Qwen-Image-20B and transform it into an efficient few-step generator. With just 1-NFE, our approach matches the performance of the original 100-NFE model on both the GenEval and DPG-Bench benchmarks, reducing computational cost by 100times with minor quality degradation. Project page is available at https://zhenglin-cheng.com/twinflow.

We propose Perceptual Flow Matching (PFM), a simple yet effective framework for few-step generation in flow-matching models. Rather than performing velocity regression in the conventional VAE latent space, PFM supervises flow matching in a perceptual feature space using pretrained perceptual models. This simple change substantially improves the few-step generation capability of flow-matching models, reducing the number of sampling steps from 35-50 to 4-8 while preserving generation quality. Unlike existing acceleration and distillation approaches, PFM requires neither teacher models nor auxiliary score networks and can be integrated into standard flow-matching training pipelines with minimal modifications. Extensive experiments on image generation, video generation, and image editing tasks demonstrate that PFM consistently produces high-quality results while producing fewer artifacts than existing distillation-based methods. We further show that perceptual supervision shifts the regression minimizer from mean-seeking to mode-seeking, biasing predictions toward on-manifold modes that remain accurate under coarse few-step integration. Our results reveal that standard flow-matching training can naturally yield high-quality few-step generators when supervised in an appropriate representation space. We hope this insight inspires future research into representation-aware objectives for efficient generative modeling.

While recent few-step sampling text-to-audio generation models like MeanAudio substantially accelerate generation by modeling average velocities, their strict one-step generation quality still lags significantly behind multi-step counterparts. We propose FdAudio to bridge this gap. Unlike MeanAudio, which relies solely on regression against target velocity fields, our post-training approach optimizes the final one-step distribution directly across pre-trained embedding spaces via a multi-representation Fréchet-distance (FD) loss. Crucially, to prevent the multi-step degradation that naive post-training with FD-loss causes, we introduce a MeanFlow consistency objective as a structural anchor. Results demonstrate that FdAudio establishes state-of-the-art one-step T2A generation quality among few-step systems, yielding an 11.4% reduction in FD score and a 28.8% improvement in FAD score relative to the baseline MeanAudio framework. Notably, we solve FD post-training's naive multi-step degradation issue by proposing the MeanFlow anchor, enabling a 25-step sampling path to maintain high-fidelity audio synthesis that matches or surpasses strong multi-step models at a fraction of their computational latency.

Few-step distillation reduces the sampling cost of diffusion and flow models, but existing approaches often require auxiliary score models or specialized architectures. We show that simple on-policy velocity regression already provides a strong foundation for 4-NFE generation. To represent teacher velocity variation within each coarse transition, we introduce Pivot, a training-only residual proxy that separates local corrections from the student's interval-mean prediction. We further repel the student from weaker teacher predictions, providing a lightweight mechanism for avoiding undesirable modes. The resulting framework, Simplified Matching Distillation (SMD), remains entirely regression-based, requires neither online score estimation nor adversarial training, and leaves the deployed generator unchanged. We evaluate SMD on image generation and editing, 3D generation, video synthesis, and joint audio--video generation, scaling to 33 billion parameters. At 4-NFE, SMD outperforms strong few-step baselines and surpasses multi-step teachers on several benchmarks. It also supports cross-model, multi-teacher, and causal-video distillation.

We introduce the Self-Evaluating Model (Self-E), a novel, from-scratch training approach for text-to-image generation that supports any-step inference. Self-E learns from data similarly to a Flow Matching model, while simultaneously employing a novel self-evaluation mechanism: it evaluates its own generated samples using its current score estimates, effectively serving as a dynamic self-teacher. Unlike traditional diffusion or flow models, it does not rely solely on local supervision, which typically necessitates many inference steps. Unlike distillation-based approaches, it does not require a pretrained teacher. This combination of instantaneous local learning and self-driven global matching bridges the gap between the two paradigms, enabling the training of a high-quality text-to-image model from scratch that excels even at very low step counts. Extensive experiments on large-scale text-to-image benchmarks show that Self-E not only excels in few-step generation, but is also competitive with state-of-the-art Flow Matching models at 50 steps. We further find that its performance improves monotonically as inference steps increase, enabling both ultra-fast few-step generation and high-quality long-trajectory sampling within a single unified model. To our knowledge, Self-E is the first from-scratch, any-step text-to-image model, offering a unified framework for efficient and scalable generation.

Generative models like Flow Matching have achieved state-of-the-art performance but are often hindered by a computationally expensive iterative sampling process. To address this, recent work has focused on few-step or one-step generation by learning the average velocity field, which directly maps noise to data. MeanFlow, a leading method in this area, learns this field by enforcing a differential identity that connects the average and instantaneous velocities. In this work, we argue that this differential formulation is a limiting special case of a more fundamental principle. We return to the first principles of average velocity and leverage the additivity property of definite integrals. This leads us to derive a novel, purely algebraic identity we term Interval Splitting Consistency. This identity establishes a self-referential relationship for the average velocity field across different time intervals without resorting to any differential operators. Based on this principle, we introduce SplitMeanFlow, a new training framework that enforces this algebraic consistency directly as a learning objective. We formally prove that the differential identity at the core of MeanFlow is recovered by taking the limit of our algebraic consistency as the interval split becomes infinitesimal. This establishes SplitMeanFlow as a direct and more general foundation for learning average velocity fields. From a practical standpoint, our algebraic approach is significantly more efficient, as it eliminates the need for JVP computations, resulting in simpler implementation, more stable training, and broader hardware compatibility. One-step and two-step SplitMeanFlow models have been successfully deployed in large-scale speech synthesis products (such as Doubao), achieving speedups of 20x.

Consistency-based generative models like Shortcut and MeanFlow achieve impressive results via a target-aware design for solving the Probability Flow ODE (PF-ODE). Typically, such methods introduce a target time r alongside the current time t to modulate outputs between a local multi-step derivative (r = t) and a global few-step integral (r = 0). However, the conventional "one input, one output" paradigm enforces a partition of the training budget, often allocating a significant portion (e.g., 75% in MeanFlow) solely to the multi-step objective for stability. This separation forces a trade-off: allocating sufficient samples to the multi-step objective leaves the few-step generation undertrained, which harms convergence and limits scalability. To this end, we propose Duality Models (DuMo) via a "one input, dual output" paradigm. Using a shared backbone with dual heads, DuMo simultaneously predicts velocity v_t and flow-map u_t from a single input x_t. This applies geometric constraints from the multi-step objective to every sample, bounding the few-step estimation without separating training objectives, thereby significantly improving stability and efficiency. On ImageNet 256 times 256, a 679M Diffusion Transformer with SD-VAE achieves a state-of-the-art (SOTA) FID of 1.79 in just 2 steps. Code is available at: https://github.com/LINs-lab/DuMo

Text-to-image diffusion models are increasingly distilled into few-step variants and being deployed to enable fast inference. However, their ability to generate harmful or undesired content poses significant safety risks. Data-driven unlearning methods suppress targeted generations by fine-tuning model weights using specialized unlearning objectives. Crucially, these objectives implicitly rely on multi-step denoising dynamics, an assumption that breaks down for few-step distilled (FSD) models, resulting in ineffective forgetting. Furthermore, performing unlearning on the non-distilled base model and subsequently re-distilling it to obtain an unlearned FSD model incurs substantial computational and time overhead, making it impractical in many settings. Hence, we address this limitation with a preference-driven unlearning framework that revisits Direct Preference Optimization (DPO) for diffusion models. We show that standard DPO and its unlearning derivatives, formulated around noise-prediction error, transfer poorly to FSD models due to their altered generation dynamics. To overcome this, we introduce a modified preference optimization formulation explicitly aligned with the few-step generation properties, enabling direct concept removal in FSD models while preserving few-step efficiency and maintaining strong retention of desirable (non-targeted) capabilities. We evaluate our framework primarily on identity and NSFW (nudity) removal tasks and also extend our method to object-level unlearning. Extensive experiments demonstrate consistent and effective forgetting, and strong retention performance, establishing our method as a practical and principled solution for unlearning in FSD models.

We introduce Score identity Distillation (SiD), an innovative data-free method that distills the generative capabilities of pretrained diffusion models into a single-step generator. SiD not only facilitates an exponentially fast reduction in Fr\'echet inception distance (FID) during distillation but also approaches or even exceeds the FID performance of the original teacher diffusion models. By reformulating forward diffusion processes as semi-implicit distributions, we leverage three score-related identities to create an innovative loss mechanism. This mechanism achieves rapid FID reduction by training the generator using its own synthesized images, eliminating the need for real data or reverse-diffusion-based generation, all accomplished within significantly shortened generation time. Upon evaluation across four benchmark datasets, the SiD algorithm demonstrates high iteration efficiency during distillation and surpasses competing distillation approaches, whether they are one-step or few-step, data-free, or dependent on training data, in terms of generation quality. This achievement not only redefines the benchmarks for efficiency and effectiveness in diffusion distillation but also in the broader field of diffusion-based generation. The PyTorch implementation is available at https://github.com/mingyuanzhou/SiD

Video diffusion models are increasingly developed into specialized models for diverse downstream tasks, and this development often includes a distillation stage, for example to accelerate sampling or to improve long-video generation. This stage is typically repeated for every specialized model. We introduce LongLive-Plug, a once-for-all distillation framework that learns reusable capabilities as LoRAs on a base model for training-free, plug-and-play deployment to compatible downstream models. These capabilities include single-pass classifier-free guidance, few-step sampling, and long-context error correction for autoregressive generation. The adapters remain reusable even when downstream models add conditioning branches, expand output channels. Despite training at a fixed guidance scale, our dedicated CFG LoRA provides text guidance control through its inference weight. Combining it with a few-step LoRA simultaneously preserves few-step generation and CFG controllability on downstream tasks. We verify training-free deployment on 54 downstream models across three backbone families and eight task categories, including world modeling, robotics, editing, and multimodal generation. The approach may support additional compatible models. Each capability can thus be distilled once per backbone family and reused without per-target retraining.

Language generation is almost universally treated as a sequential process: autoregressive models emit one token at a time, while diffusion language models replace token-level seriality with a long trajectory of iterative refinement. In this work, we introduce PlaidQ, a 0.7B continuous diffusion language model for code generation, and show that its trajectory can be aggressively distilled into only a few denoising steps---or even one, enabling efficient code generation. PlaidQ repurposes a pretrained autoregressive model as a bidirectional denoiser over continuous token embeddings. We distill PlaidQ with distribution matching for few-step generation and paired-trajectory supervision for one-step generation. At matched model scale, PlaidQ is competitive with discrete diffusion language models on code generation. Distillation then shifts the quality--compute frontier: a 16-step student reaches 31.78 and 40.49 pass@10 on HumanEval and MBPP+, surpassing the same PlaidQ teacher sampled for 512 steps. At the extreme, paired-trajectory distillation achieves 7.07 pass@1 on HumanEval with a single denoising step, producing functionally correct programs. Together, these results establish continuous diffusion as a viable path to few-step and one-step code generation. Broadly, continuous diffusion is not merely another representation for language: it provides an interface through which language models can inherit the acceleration and distillation machinery of continuous diffusion modeling. Training and inference code and model checkpoints are available at https://github.com/pengzhangzhi/plaidq.

Distribution Matching Distillation (DMD) trains a few-step student from the difference between separately estimated target and student scores, so it must keep an auxiliary diffusion model fitted to the student's evolving distribution at extra memory and computation cost. We introduce DMAD, Distribution Matching as Adversarial Distillation, which recasts distribution matching as classification and learns the required log-density ratios directly. Two discriminator heads on a shared backbone distinguish real data and teacher samples from the student's, and linear losses on their logits train the student without auxiliary score fitting. We prove that at the discriminator optimum these losses recover the distribution-matching gradient underlying DMD, through the classical identity linking discriminator logits to log-density ratios. We further introduce gap-based reweighting, which adapts teacher supervision across noise levels from the real-data head's empirical logit gap between real and teacher samples. DMAD reaches a Fréchet Inception Distance (FID) of 1.04 with one-step generation on ImageNet-64x64, 14.47 with four-step SDXL on COCO-10K, and a VBench total score of 85.15 with four-step Wan2.1-T2V-14B, the best values among the compared few-step methods and the multi-step teachers. On MiniMax-H3-33B, our four-step student achieves overall human preference rates of 79.1% over DMD2 and 84.6% over rCM for joint audio-video generation, excluding ties. Our code, models and demos are available at https://yzmblog.github.io/projects/DMAD.

Multistep inference is a bottleneck for real-time generative speech enhancement because flow- and diffusion-based systems learn an instantaneous velocity field and therefore rely on iterative ordinary differential equation (ODE) solvers. We introduce MeanFlowSE, a conditional generative model that learns the average velocity over finite intervals along a trajectory. Using a Jacobian-vector product (JVP) to instantiate the MeanFlow identity, we derive a local training objective that directly supervises finite-interval displacement while remaining consistent with the instantaneous-field constraint on the diagonal. At inference, MeanFlowSE performs single-step generation via a backward-in-time displacement, removing the need for multistep solvers; an optional few-step variant offers additional refinement. On VoiceBank-DEMAND, the single-step model achieves strong intelligibility, fidelity, and perceptual quality with substantially lower computational cost than multistep baselines. The method requires no knowledge distillation or external teachers, providing an efficient, high-fidelity framework for real-time generative speech enhancement. The proposed method is open-sourced at https://github.com/liduojia1/MeanFlowSE.

Language models based on discrete diffusion have attracted widespread interest for their potential to provide faster generation than autoregressive models. In practice, however, they exhibit a sharp degradation of sample quality in the few-step regime, failing to realize this promise. Here we show that language models leveraging flow-based continuous denoising can outperform discrete diffusion in both quality and speed. By revisiting the fundamentals of flows over discrete modalities, we build a flow-based language model (FLM) that performs Euclidean denoising over one-hot token encodings. We show that the model can be trained by predicting the clean data via a cross entropy objective, where we introduce a simple time reparameterization that greatly improves training stability and generation quality. By distilling FLM into its associated flow map, we obtain a distilled flow map language model (FMLM) capable of few-step generation. On the LM1B and OWT language datasets, FLM attains generation quality matching state-of-the-art discrete diffusion models. With FMLM, our approach outperforms recent few-step language models across the board, with one-step generation exceeding their 8-step quality. Our work calls into question the widely held hypothesis that discrete diffusion processes are necessary for generative modeling over discrete modalities, and paves the way toward accelerated flow-based language modeling at scale. Code is available at https://github.com/david3684/flm.

Autoregressive (AR) models have achieved state-of-the-art performance in text and image generation but suffer from slow generation due to the token-by-token process. We ask an ambitious question: can a pre-trained AR model be adapted to generate outputs in just one or two steps? If successful, this would significantly advance the development and deployment of AR models. We notice that existing works that try to speed up AR generation by generating multiple tokens at once fundamentally cannot capture the output distribution due to the conditional dependencies between tokens, limiting their effectiveness for few-step generation. To address this, we propose Distilled Decoding (DD), which uses flow matching to create a deterministic mapping from Gaussian distribution to the output distribution of the pre-trained AR model. We then train a network to distill this mapping, enabling few-step generation. DD doesn't need the training data of the original AR model, making it more practical.We evaluate DD on state-of-the-art image AR models and present promising results on ImageNet-256. For VAR, which requires 10-step generation, DD enables one-step generation (6.3times speed-up), with an acceptable increase in FID from 4.19 to 9.96. For LlamaGen, DD reduces generation from 256 steps to 1, achieving an 217.8times speed-up with a comparable FID increase from 4.11 to 11.35. In both cases, baseline methods completely fail with FID>100. DD also excels on text-to-image generation, reducing the generation from 256 steps to 2 for LlamaGen with minimal FID increase from 25.70 to 28.95. As the first work to demonstrate the possibility of one-step generation for image AR models, DD challenges the prevailing notion that AR models are inherently slow, and opens up new opportunities for efficient AR generation. The project website is at https://imagination-research.github.io/distilled-decoding.

Diffusion models have significantly advanced the state of the art in image, audio, and video generation tasks. However, their applications in practical scenarios are hindered by slow inference speed. Drawing inspiration from the approximation strategies utilized in consistency models, we propose the Sub-path Linear Approximation Model (SLAM), which accelerates diffusion models while maintaining high-quality image generation. SLAM treats the PF-ODE trajectory as a series of PF-ODE sub-paths divided by sampled points, and harnesses sub-path linear (SL) ODEs to form a progressive and continuous error estimation along each individual PF-ODE sub-path. The optimization on such SL-ODEs allows SLAM to construct denoising mappings with smaller cumulative approximated errors. An efficient distillation method is also developed to facilitate the incorporation of more advanced diffusion models, such as latent diffusion models. Our extensive experimental results demonstrate that SLAM achieves an efficient training regimen, requiring only 6 A100 GPU days to produce a high-quality generative model capable of 2 to 4-step generation with high performance. Comprehensive evaluations on LAION, MS COCO 2014, and MS COCO 2017 datasets also illustrate that SLAM surpasses existing acceleration methods in few-step generation tasks, achieving state-of-the-art performance both on FID and the quality of the generated images.

In discrete generative modeling, two dominant paradigms demonstrate divergent capabilities: Masked Diffusion Language Models (MDLM) excel at semantic understanding and zero-shot generalization, whereas Uniform-noise Diffusion Language Models (UDLM) achieve strong few-step generation quality, yet neither attains balanced performance across both dimensions. To address this, we propose XDLM, which bridges the two paradigms via a stationary noise kernel. XDLM offers two key contributions: (1) it provides a principled theoretical unification of MDLM and UDLM, recovering each paradigm as a special case; and (2) an alleviated memory bottleneck enabled by an algebraic simplification of the posterior probabilities. Experiments demonstrate that XDLM advances the Pareto frontier between understanding capability and generation quality. Quantitatively, XDLM surpasses UDLM by 5.4 points on zero-shot text benchmarks and outperforms MDLM in few-step image generation (FID 54.1 vs. 80.8). When scaled to tune an 8B-parameter large language model, XDLM achieves 15.0 MBPP in just 32 steps, effectively doubling the baseline performance. Finally, analysis of training dynamics reveals XDLM's superior potential for long-term scaling. Code is available at https://github.com/MzeroMiko/XDLM

The multi-step denoising process in diffusion and Flow Matching models causes major efficiency issues, which motivates research on few-step generation. We present Solution Flow Models (SoFlow), a framework for one-step generation from scratch. By analyzing the relationship between the velocity function and the solution function of the velocity ordinary differential equation (ODE), we propose a Flow Matching loss and a solution consistency loss to train our models. The Flow Matching loss allows our models to provide estimated velocity fields for Classifier-Free Guidance (CFG) during training, which improves generation performance. Notably, our consistency loss does not require the calculation of the Jacobian-vector product (JVP), a common requirement in recent works that is not well-optimized in deep learning frameworks like PyTorch. Experimental results indicate that, when trained from scratch using the same Diffusion Transformer (DiT) architecture and an equal number of training epochs, our models achieve better FID-50K scores than MeanFlow models on the ImageNet 256x256 dataset.

In this work, we propose Mutual Forcing, a framework for fast autoregressive audio-video generation with long-horizon audio-video synchronization. Our approach addresses two key challenges: joint audio-video modeling and fast autoregressive generation. To ease joint audio-video optimization, we adopt a two-stage training strategy: we first train uni-modal generators and then couple them into a unified audio-video model for joint training on paired data. For streaming generation, we ask whether a native fast causal audio-video model can be trained directly, instead of following existing streaming distillation pipelines that typically train a bidirectional model first and then convert it into a causal generator through multiple distillation stages. Our answer is Mutual Forcing, which builds directly on native autoregressive model and integrates few-step and multi-step generation within a single weight-shared model, enabling self-distillation and improved training-inference consistency. The multi-step mode improves the few-step mode via self-distillation, while the few-step mode generates historical context during training to improve training-inference consistency; because the two modes share parameters, these two effects reinforce each other within a single model. Compared with prior approaches such as Self-Forcing, Mutual Forcing removes the need for an additional bidirectional teacher model, supports more flexible training sequence lengths, reduces training overhead, and allows the model to improve directly from real paired data rather than a fixed teacher. Experiments show that Mutual Forcing matches or surpasses strong baselines that require around 50 sampling steps while using only 4 to 8 steps, demonstrating substantial advantages in both efficiency and quality. The project page is available at https://mutualforcing.github.io.

Diffusion-based models have gained wide adoption in the virtual human generation due to their outstanding expressiveness. However, their substantial computational requirements have constrained their deployment in real-time interactive avatar applications, where stringent speed, latency, and duration requirements are paramount. We present a novel audio-driven portrait video generation framework based on the diffusion model to address these challenges. Firstly, we propose robust variable-length video generation to reduce the minimum time required to generate the initial video clip or state transitions, which significantly enhances the user experience. Secondly, we propose a consistency model training strategy for Audio-Image-to-Video to ensure real-time performance, enabling a fast few-step generation. Model quantization and pipeline parallelism are further employed to accelerate the inference speed. To mitigate the stability loss incurred by the diffusion process and model quantization, we introduce a new inference strategy tailored for long-duration video generation. These methods ensure real-time performance and low latency while maintaining high-fidelity output. Thirdly, we incorporate class labels as a conditional input to seamlessly switch between speaking, listening, and idle states. Lastly, we design a novel mechanism for fine-grained facial expression control to exploit our model's inherent capacity. Extensive experiments demonstrate that our approach achieves low-latency, fluid, and authentic two-way communication. On an NVIDIA RTX 4090D, our model achieves a maximum of 78 FPS at a resolution of 384x384 and 45 FPS at a resolution of 512x512, with an initial video generation latency of 140 ms and 215 ms, respectively.

Audio and music generation based on flexible multimodal control signals is a widely applicable topic, with the following key challenges: 1) a unified multimodal modeling framework, 2) large-scale, high-quality training data, and 3) the prohibitive inference cost of multi-step diffusion sampling. As such, we propose AudioX-Turbo, a unified and efficient framework for anything-to-audio generation that integrates varied multimodal conditions (i.e., text, video, and audio signals) in this work. AudioX-Turbo follows a teacher-student paradigm. The teacher AudioX-Base is built on a Multimodal Diffusion Transformer with a Multimodal Adaptive Fusion module that aligns diverse multimodal inputs for high-fidelity synthesis, and is then distilled into the few-step student AudioX-Turbo via Distribution Matching Distillation adapted to flow matching, complemented by a diffusion-based discriminator for high-quality few-step generation. To support the training of AudioX-Turbo, we construct a large-scale, high-quality dataset, IF-caps-Pro, comprising approximately 9.2M samples curated through a two-stage data collection and annotation pipeline. We benchmark AudioX-Turbo across a wide range of tasks, finding that our model achieves superior performance, especially on text-to-audio and text-to-music generation, while operating at only 4 sampling steps and requiring approximately 25x fewer function evaluations (NFE) than multi-step baselines. These results demonstrate that our method is capable of audio generation under flexible multimodal control, showing efficient and powerful instruction-following capabilities. The code and datasets will be available at https://zeyuet.github.io/AudioX-Turbo/.

Uniform-state discrete diffusion models hold the promise of fast text generation due to their inherent ability to self-correct. However, they are typically outperformed by autoregressive models and masked diffusion models. In this work, we narrow this performance gap by leveraging a key insight: Uniform-state diffusion processes naturally emerge from an underlying Gaussian diffusion. Our method, Duo, transfers powerful techniques from Gaussian diffusion to improve both training and sampling. First, we introduce a curriculum learning strategy guided by the Gaussian process, doubling training speed by reducing variance. Models trained with curriculum learning surpass autoregressive models in zero-shot perplexity on 3 of 7 benchmarks. Second, we present Discrete Consistency Distillation, which adapts consistency distillation from the continuous to the discrete setting. This algorithm unlocks few-step generation in diffusion language models by accelerating sampling by two orders of magnitude. We provide the code and model checkpoints on the project page: http://s-sahoo.github.io/duo

Recent advancements in timestep-distilled diffusion models have enabled high-quality image generation that rivals non-distilled multi-step models, but with significantly fewer inference steps. While such models are attractive for applications due to the low inference cost and latency, fine-tuning them with a naive diffusion objective would result in degraded and blurry outputs. An intuitive alternative is to repeat the diffusion distillation process with a fine-tuned teacher model, which produces good results but is cumbersome and computationally intensive; the distillation training usually requires magnitude higher of training compute compared to fine-tuning for specific image styles. In this paper, we present an algorithm named pairwise sample optimization (PSO), which enables the direct fine-tuning of an arbitrary timestep-distilled diffusion model. PSO introduces additional reference images sampled from the current time-step distilled model, and increases the relative likelihood margin between the training images and reference images. This enables the model to retain its few-step generation ability, while allowing for fine-tuning of its output distribution. We also demonstrate that PSO is a generalized formulation which can be flexibly extended to both offline-sampled and online-sampled pairwise data, covering various popular objectives for diffusion model preference optimization. We evaluate PSO in both preference optimization and other fine-tuning tasks, including style transfer and concept customization. We show that PSO can directly adapt distilled models to human-preferred generation with both offline and online-generated pairwise preference image data. PSO also demonstrates effectiveness in style transfer and concept customization by directly tuning timestep-distilled diffusion models.

Continuous-time Consistency Models (CMs) promise efficient few-step generation but face significant challenges with training instability. We argue this instability stems from a fundamental conflict: by training a network to learn only a shortcut across a probability flow, the model loses its grasp on the instantaneous velocity field that defines the flow. Our solution is to explicitly anchor the model in the underlying flow during training. We introduce the Flow-Anchored Consistency Model (FACM), a simple but effective training strategy that uses a Flow Matching (FM) task as an anchor for the primary CM shortcut objective. This Flow-Anchoring approach requires no architectural modifications and is broadly compatible with standard model architectures. By distilling a pre-trained LightningDiT model, our method achieves a state-of-the-art FID of 1.32 with two steps (NFE=2) and 1.76 with just one step (NFE=1) on ImageNet 256x256, significantly outperforming previous methods. This provides a general and effective recipe for building high-performance, few-step generative models. Our code and pretrained models: https://github.com/ali-vilab/FACM.

Uniform-state discrete diffusion models excel at few-step generation and guidance due to their ability to self-correct, making them preferred over autoregressive or Masked diffusion models in these settings. However, their sampling quality plateaus with ancestral samplers as the number of steps increases. We introduce a family of Predictor-Corrector (PC) samplers for discrete diffusion that generalize prior methods and apply to arbitrary noise processes. When paired with uniform-state diffusion, our samplers outperform ancestral sampling on both language and image modeling, achieving lower generative perplexity at matched unigram entropy on OpenWebText and better FID/IS scores on CIFAR10. Crucially, unlike conventional samplers, our PC methods continue to improve with more sampling steps. Taken together, these findings call into question the assumption that Masked diffusion is the inevitable future of diffusion-based language modeling. Beyond sampling, we develop a memory-efficient curriculum for the Gaussian relaxation training phase, reducing training time by 25% and memory by 33% compared to Duo while maintaining comparable perplexity on OpenWebText and LM1B and strong downstream performance. We release code, checkpoints, and a video-tutorial on: https://s-sahoo.com/duo-ch2

Modern diffusion and flow-based models are increasingly moving toward few-step, latent-free generation to bypass the computational overhead of multi-step sampling and the reconstruction bottlenecks of external autoencoders. We propose the Interval Denoiser, a theoretically rigorous framework for latent-free generation. Derived directly from the flow matching ODE, it establishes an exact analytical mapping for intermediate trajectory states. Unlike prior formulations, our prediction is shown to reside on a low-dimensional manifold across any time interval, making the regression tractable for a network operating directly on pixels. Furthermore, by avoiding empirical algebraic substitutions, our formulation correctly isolates the pure time derivative to prevent biased gradient evaluations and ensure exact first-order optimization. By analyzing this objective, we equip our framework with residual clipping and a time-sampling curriculum, enabling effective long-interval training and improving few-step performance. Trained from scratch on ImageNet 256x256, our model achieves an FID of 4.55 in one step (1-NFE) and 3.98 in two steps (2-NFE) without perceptual losses.

High-dimensional count data are common in scientific applications, but most diffusion and flow models are designed for continuous or categorical data, and generation often requires many sequential model evaluations. We propose Count Flow Map, a generative model that learns finite-time transitions directly in count space for one- or few-step generation. Our model directly learns stochastic transitions over finite time intervals, using Poisson births and Binomial deaths to preserve nonnegative integer counts without a predefined maximum. These transition models are trained to match the underlying local birth--death dynamics and to maintain consistency across step sizes. We characterize the connection between local dynamics and finite-time transition consistency and derive a bound on the generation error. After validating Count Flow Map in several simulations, including a high-dimensional, high-count setting, we apply it to single-cell drug perturbation prediction and neural population forecasting, where it captures perturbation responses and supports forecasts of high-activity events with only one or a few model evaluations. Together, these experiments demonstrate that Count Flow Map enables high-quality generation directly in count space across inference budgets, from one-step to few-step generation, using a single trained model.

We present Piecewise Rectified Flow (PeRFlow), a flow-based method for accelerating diffusion models. PeRFlow divides the sampling process of generative flows into several time windows and straightens the trajectories in each interval via the reflow operation, thereby approaching piecewise linear flows. PeRFlow achieves superior performance in a few-step generation. Moreover, through dedicated parameterizations, the obtained PeRFlow models show advantageous transfer ability, serving as universal plug-and-play accelerators that are compatible with various workflows based on the pre-trained diffusion models. The implementations of training and inference are fully open-sourced. https://github.com/magic-research/piecewise-rectified-flow

Diffusion models have made significant breakthroughs in image, audio, and video generation, but they depend on an iterative generation process that causes slow sampling speed and caps their potential for real-time applications. To overcome this limitation, we propose consistency models, a new family of generative models that achieve high sample quality without adversarial training. They support fast one-step generation by design, while still allowing for few-step sampling to trade compute for sample quality. They also support zero-shot data editing, like image inpainting, colorization, and super-resolution, without requiring explicit training on these tasks. Consistency models can be trained either as a way to distill pre-trained diffusion models, or as standalone generative models. Through extensive experiments, we demonstrate that they outperform existing distillation techniques for diffusion models in one- and few-step generation. For example, we achieve the new state-of-the-art FID of 3.55 on CIFAR-10 and 6.20 on ImageNet 64x64 for one-step generation. When trained as standalone generative models, consistency models also outperform single-step, non-adversarial generative models on standard benchmarks like CIFAR-10, ImageNet 64x64 and LSUN 256x256.

Consistency distillation methods have demonstrated significant success in accelerating generative tasks of diffusion models. However, since previous consistency distillation methods use simple and straightforward strategies in selecting target timesteps, they usually struggle with blurs and detail losses in generated images. To address these limitations, we introduce Target-Driven Distillation (TDD), which (1) adopts a delicate selection strategy of target timesteps, increasing the training efficiency; (2) utilizes decoupled guidances during training, making TDD open to post-tuning on guidance scale during inference periods; (3) can be optionally equipped with non-equidistant sampling and x0 clipping, enabling a more flexible and accurate way for image sampling. Experiments verify that TDD achieves state-of-the-art performance in few-step generation, offering a better choice among consistency distillation models.

Existing text-to-image (T2I) diffusion models face several limitations, including large model sizes, slow runtime, and low-quality generation on mobile devices. This paper aims to address all of these challenges by developing an extremely small and fast T2I model that generates high-resolution and high-quality images on mobile platforms. We propose several techniques to achieve this goal. First, we systematically examine the design choices of the network architecture to reduce model parameters and latency, while ensuring high-quality generation. Second, to further improve generation quality, we employ cross-architecture knowledge distillation from a much larger model, using a multi-level approach to guide the training of our model from scratch. Third, we enable a few-step generation by integrating adversarial guidance with knowledge distillation. For the first time, our model SnapGen, demonstrates the generation of 1024x1024 px images on a mobile device around 1.4 seconds. On ImageNet-1K, our model, with only 372M parameters, achieves an FID of 2.06 for 256x256 px generation. On T2I benchmarks (i.e., GenEval and DPG-Bench), our model with merely 379M parameters, surpasses large-scale models with billions of parameters at a significantly smaller size (e.g., 7x smaller than SDXL, 14x smaller than IF-XL).

MeanFlow (MF) is a diffusion-motivated generative model that enables efficient few-step generation by learning long jumps directly from noise to data. In practice, it is often used as a latent MF by leveraging the pre-trained Stable Diffusion variational autoencoder (SD-VAE) for high-dimensional data modeling. However, MF training remains computationally demanding and is often unstable. During inference, the SD-VAE decoder dominates the generation cost, and MF depends on complex guidance hyperparameters for class-conditional generation. In this work, we develop an efficient training and sampling scheme for MF in the latent space of a Representation Autoencoder (RAE), where a pre-trained vision encoder (e.g., DINO) provides semantically rich latents paired with a lightweight decoder. We observe that naive MF training in the RAE latent space suffers from severe gradient explosion. To stabilize and accelerate training, we adopt Consistency Mid-Training for trajectory-aware initialization and use a two-stage scheme: distillation from a pre-trained flow matching teacher to speed convergence and reduce variance, followed by an optional bootstrapping stage with a one-point velocity estimator to further reduce deviation from the oracle mean flow. This design removes the need for guidance, simplifies training configurations, and reduces computation in both training and sampling. Empirically, our method achieves a 1-step FID of 2.03, outperforming vanilla MF's 3.43, while reducing sampling GFLOPS by 38% and total training cost by 83% on ImageNet 256. We further scale our approach to ImageNet 512, achieving a competitive 1-step FID of 3.23 with the lowest GFLOPS among all baselines. Code is available at https://github.com/sony/mf-rae.

Customized image editing aims to equip pre-trained diffusion models with specific visual effects using limited paired data, typically via Low-Rank Adaptation (LoRA). As the number of desired effects grows, storing and dynamically loading numerous these effect LoRAs significantly increases deployment overhead. Furthermore, current pipelines typically cascade these effect LoRAs with acceleration modules for fast generation, which triggers severe parameter interference and results in concept bleeding and style degradation. We propose CollectionLoRA, a multi-teacher on-policy distillation framework capable of distilling the concepts of up to 50 different effect LoRAs along with few-step generation capabilities into a single LoRA. This fundamentally resolves the feature interference issue and significantly reduces deployment costs. Specifically, the method introduces (i) a Probabilistic Dual-Stream Routing mechanism that enables the model to randomly switch between data sources during training, effectively enhancing its generalization in unseen scenarios; (ii) an Asymmetric Orthogonal Prompting strategy to achieve concept isolation within the prompt space; (iii) a Coarse-to-Fine Distillation Objective to mitigate the distribution gap between the teacher and student models. Extensive evaluations show that CollectionLoRA distills all customized effects and few-step generation into a single LoRA, reducing deployment overhead while achieving concept fidelity comparable to or better than independently trained teacher models.

Recent text-to-motion models have improved motion quality and instruction following, yet many-step denoising and large model components make deployment slow and memory-intensive. We present Terminal-Amplification-Controlled Distillation (TACD), an on-policy approach for training efficient motion generators from text prompts and pretrained teachers, without real-motion training data. Building on segmented on-policy flow distillation, we supervise clean-motion predictions along student-generated trajectories. We identify a failure mode in which velocity matching on a fixed supervision grid repeatedly overweights errors near the denoising endpoint, degrading few-step generation. TACD ties the latest teacher query to the student's step size, bounding the effective loss weights in clean-motion space without changing inference. Experiments on HumanML3D and KIT-ML demonstrate improved few-step generation, including a 58% reduction in eight-step HY-Motion student FID relative to distillation without this bound. For diffusion teachers, the endpoint-matching form of TACD yields four-step students with lower FID and matched or improved text-motion retrieval relative to their 50-step teachers on HumanML3D. On HY-Motion and Kimodo, eight-step students with compact components achieve 7.7-11.9x end-to-end speedups and reduce peak GPU memory by 3.8-6.7x relative to their teachers. Project page: https://vkgo.github.io/TACD/

Diffusion distillation, exemplified by Distribution Matching Distillation (DMD), has shown great promise in few-step generation but often sacrifices quality for sampling speed. While integrating Reinforcement Learning (RL) into distillation offers potential, a naive fusion of these two objectives relies on suboptimal raw sample evaluation. This sample-based scoring creates inherent conflicts with the distillation trajectory and produces unreliable rewards due to the noisy nature of early-stage generation. To overcome these limitations, we propose GDMD, a novel framework that redefines the reward mechanism by prioritizing distillation gradients over raw pixel outputs as the primary signal for optimization. By reinterpreting the DMD gradients as implicit target tensors, our framework enables existing reward models to directly evaluate the quality of distillation updates. This gradient-level guidance functions as an adaptive weighting that synchronizes the RL policy with the distillation objective, effectively neutralizing optimization divergence. Empirical results show that GDMD sets a new SOTA for few-step generation. Specifically, our 4-step models outperform the quality of their multi-step teacher and substantially exceed previous DMDR results in GenEval and human-preference metrics, exhibiting strong scalability potential.

Flow map models such as Consistency Models (CM) and Mean Flow (MF) enable few-step generation by learning the long jump of the ODE solution of diffusion models, yet training remains unstable, sensitive to hyperparameters, and costly. Initializing from a pre-trained diffusion model helps, but still requires converting infinitesimal steps into a long-jump map, leaving instability unresolved. We introduce mid-training, the first concept and practical method that inserts a lightweight intermediate stage between the (diffusion) pre-training and the final flow map training (i.e., post-training) for vision generation. Concretely, Consistency Mid-Training (CMT) is a compact and principled stage that trains a model to map points along a solver trajectory from a pre-trained model, starting from a prior sample, directly to the solver-generated clean sample. It yields a trajectory-consistent and stable initialization. This initializer outperforms random and diffusion-based baselines and enables fast, robust convergence without heuristics. Initializing post-training with CMT weights further simplifies flow map learning. Empirically, CMT achieves state of the art two step FIDs: 1.97 on CIFAR-10, 1.32 on ImageNet 64x64, and 1.84 on ImageNet 512x512, while using up to 98% less training data and GPU time, compared to CMs. On ImageNet 256x256, CMT reaches 1-step FID 3.34 while cutting total training time by about 50% compared to MF from scratch (FID 3.43). This establishes CMT as a principled, efficient, and general framework for training flow map models.

Diffusion models achieve state-of-the-art generative performance but are fundamentally bottlenecked by their slow, iterative sampling process. While diffusion distillation techniques enable high-fidelity, few-step generation, traditional objectives often restrict the student's performance by anchoring it solely to the teacher. Recent approaches have attempted to break this ceiling by integrating Reinforcement Learning (RL), typically through a simple summation of distillation and RL objectives. In this work, we propose a novel paradigm by re-conceptualizing distribution matching as a reward, denoted as R_dm. This unified perspective bridges the algorithmic gap between Diffusion Matching Distillation (DMD) and RL, providing several primary benefits. (1) Enhanced Optimization Stability: We introduce Group Normalized Distribution Matching (GNDM), which adapts standard RL group normalization to stabilize R_dm estimation. By leveraging group-mean statistics, GNDM establishes a more robust and effective optimization direction. (2) Seamless Reward Integration: Our reward-centric formulation inherently supports adaptive weighting mechanisms, allowing for the fluid combination of DMD with external reward models. (3) Improved Sampling Efficiency: By aligning with RL principles, the framework readily incorporates Importance Sampling (IS), leading to a significant boost in sampling efficiency. Extensive experiments demonstrate that GNDM outperforms vanilla DMD, reducing the FID by 1.87. Furthermore, our multi-reward variant, GNDMR, surpasses existing baselines by striking an optimal balance between aesthetic quality and fidelity, achieving a peak HPS of 30.37 and a low FID-SD of 12.21. Ultimately, R_dm provides a flexible, stable, and efficient framework for real-time, high-fidelity synthesis. Codes are coming soon.

Despite the promise of synthesizing high-fidelity videos, Diffusion Transformers (DiTs) with 3D full attention suffer from expensive inference due to the complexity of attention computation and numerous sampling steps. For example, the popular Open-Sora-Plan model consumes more than 9 minutes for generating a single video of 29 frames. This paper addresses the inefficiency issue from two aspects: 1) Prune the 3D full attention based on the redundancy within video data; We identify a prevalent tile-style repetitive pattern in the 3D attention maps for video data, and advocate a new family of sparse 3D attention that holds a linear complexity w.r.t. the number of video frames. 2) Shorten the sampling process by adopting existing multi-step consistency distillation; We split the entire sampling trajectory into several segments and perform consistency distillation within each one to activate few-step generation capacities. We further devise a three-stage training pipeline to conjoin the low-complexity attention and few-step generation capacities. Notably, with 0.1% pretraining data, we turn the Open-Sora-Plan-1.2 model into an efficient one that is 7.4x -7.8x faster for 29 and 93 frames 720p video generation with a marginal performance trade-off in VBench. In addition, we demonstrate that our approach is amenable to distributed inference, achieving an additional 3.91x speedup when running on 4 GPUs with sequence parallelism.

Self-conditioning is a core technique that enhances continuous flow-based language models, where the model learns to denoise generated text by conditioning on its own denoising estimate. While empirically successful, its performance improvements are poorly understood. Moreover, there is growing interest in the use of few-step generators based on flow maps, for which how to leverage self-conditioning is unclear. Here, we show that flow language models with self-conditioning solve a fixed-point iteration that bootstraps the performance of the learned denoiser. We use this viewpoint to formulate fixed-point flows, a two-dimensional class of self-conditioned flows, where the first dimension represents the flow process and the second represents the fixed-point iteration. We show that fixed-point flows define valid flow maps, and show that they can be distilled from self-conditioned flow models by compressing both fixed-point iterations and the flow process, the former with fixed-point distillation and the latter with flow map distillation. Our resulting flow map language model, FMLM^star, outperforms state-of-the-art self-conditioned models and few-step models in one- and few-step generation on OpenWebText. Code is available at https://github.com/Ugness/self-conditioned-fmlm.

Existing streaming video systems often rely on sequential, distillation-centered training pipelines to enable few-step long-video generation. However, this paradigm suffers from two limitations. First, failures or distribution shifts introduced in earlier stages affect later optimization, complicating the training process to converge. Second, the distillation-centric objective favours short-term generation but is prone to quality degradation when autoregressive errors accumulate over long rollouts. We propose Avatar-Forever, a decoupled parallel training framework for high-quality real-time infinite interactive avatars. Instead of coupling generation efficiency and long-horizon robustness under a sequential distillation pipeline, we treat them as two independent capabilities that can be trained in parallel. One branch performs full-parameter distillation to train an efficient generator with high visual quality, while another trains a lightweight long-horizon adapter via Recovery-oriented Rollout Training (RRT), which improves generation robustness under long-horizon inference conditions. Our decoupled parallel training design simplifies the overall training process and avoids unnecessary objective conflicts between few-step generation and long-horizon adaptation. We further introduce ForeverCache, a chunk-wise feature caching mechanism to substantially reduce redundant history computation during streaming inference. Built upon a 22B video foundation model, Avatar-Forever supports unbounded audio-driven avatar generation while maintaining identity consistency, motion coherence, and visual fidelity, enabling an end-to-end throughput of high-resolution 768x512 videos at 27.2 FPS on a single H100 GPU and providing a practical path toward stable digital humans.

Distilling large latent diffusion models (LDMs) into ones that are fast to sample from is attracting growing research interest. However, the majority of existing methods face a dilemma where they either (i) depend on multiple individual distilled models for different sampling budgets, or (ii) sacrifice generation quality with limited (e.g., 2-4) and/or moderate (e.g., 5-8) sampling steps. To address these, we extend the recent multistep consistency distillation (MCD) strategy to representative LDMs, establishing the Multistep Latent Consistency Models (MLCMs) approach for low-cost high-quality image synthesis. MLCM serves as a unified model for various sampling steps due to the promise of MCD. We further augment MCD with a progressive training strategy to strengthen inter-segment consistency to boost the quality of few-step generations. We take the states from the sampling trajectories of the teacher model as training data for MLCMs to lift the requirements for high-quality training datasets and to bridge the gap between the training and inference of the distilled model. MLCM is compatible with preference learning strategies for further improvement of visual quality and aesthetic appeal. Empirically, MLCM can generate high-quality, delightful images with only 2-8 sampling steps. On the MSCOCO-2017 5K benchmark, MLCM distilled from SDXL gets a CLIP Score of 33.30, Aesthetic Score of 6.19, and Image Reward of 1.20 with only 4 steps, substantially surpassing 4-step LCM [23], 8-step SDXL-Lightning [17], and 8-step HyperSD [33]. We also demonstrate the versatility of MLCMs in applications including controllable generation, image style transfer, and Chinese-to-image generation.

We present SD3.5-Flash, an efficient few-step distillation framework that brings high-quality image generation to accessible consumer devices. Our approach distills computationally prohibitive rectified flow models through a reformulated distribution matching objective tailored specifically for few-step generation. We introduce two key innovations: "timestep sharing" to reduce gradient noise and "split-timestep fine-tuning" to improve prompt alignment. Combined with comprehensive pipeline optimizations like text encoder restructuring and specialized quantization, our system enables both rapid generation and memory-efficient deployment across different hardware configurations. This democratizes access across the full spectrum of devices, from mobile phones to desktop computers. Through extensive evaluation including large-scale user studies, we demonstrate that SD3.5-Flash consistently outperforms existing few-step methods, making advanced generative AI truly accessible for practical deployment.

MeanFlow generators achieve fast few-step sampling by predicting average velocities over time intervals, making them attractive for efficient generation. Reinforcement learning (RL) has become a powerful way to align diffusion and flow models with human preferences and task-specific objectives. In particular, DiffusionNFT offers an efficient forward-process RL framework that does not require reverse-process trajectories or likelihood estimation. However, applying such RL methods to MeanFlow remains underexplored. DiffusionNFT optimizes instantaneous velocities, whereas MeanFlow samples with average velocities. To bridge this gap, we introduce MeanFlowNFT. Inspired by the MeanFlow identity, which bridges average and instantaneous velocities, we construct an induced instantaneous-velocity predictor. We apply the DiffusionNFT objective to this predictor, making reward optimization well-defined for MeanFlow. Sampling remains based on the average velocity, preserving MeanFlow's fast few-step generation. We further prove that MeanFlowNFT inherits DiffusionNFT's strict policy-improvement guarantee. Experiments on image and video generation show that MeanFlowNFT consistently improves baselines. Moreover, it outperforms prior state-of-the-art RL-tuned few-step generators on most metrics (6 of 8 on SD3.5-M), and can even surpass multi-step RL-tuned diffusion while using only a few sampling steps. For instance, on Wan 2.1, 4-step MeanFlowNFT reaches a VBench score of 84.33, surpassing 50-step LongCat-Video RL (82.57).

Real-time motion-controllable video generation remains challenging due to the inherent latency of bidirectional diffusion models and the lack of effective autoregressive (AR) approaches. Existing AR video diffusion models are limited to simple control signals or text-to-video generation, and often suffer from quality degradation and motion artifacts in few-step generation. To address these challenges, we propose AR-Drag, the first RL-enhanced few-step AR video diffusion model for real-time image-to-video generation with diverse motion control. We first fine-tune a base I2V model to support basic motion control, then further improve it via reinforcement learning with a trajectory-based reward model. Our design preserves the Markov property through a Self-Rollout mechanism and accelerates training by selectively introducing stochasticity in denoising steps. Extensive experiments demonstrate that AR-Drag achieves high visual fidelity and precise motion alignment, significantly reducing latency compared with state-of-the-art motion-controllable VDMs, while using only 1.3B parameters. Additional visualizations can be found on our project page: https://kesenzhao.github.io/AR-Drag.github.io/.

Diffusion models produce high-quality text-to-image results, but their iterative denoising is computationally expensive.Distribution Matching Distillation (DMD) emerges as a promising path to few-step distillation, but suffers from diversity collapse and fidelity degradation when reduced to two steps or fewer. We present 1.x-Distill, the first fractional-step distillation framework that breaks the integer-step constraint of prior few-step methods and establishes 1.x-step generation as a practical regime for distilled diffusion models.Specifically, we first analyze the overlooked role of teacher CFG in DMD and introduce a simple yet effective modification to suppress mode collapse. Then, to improve performance under extreme steps, we introduce Stagewise Focused Distillation, a two-stage strategy that learns coarse structure through diversity-preserving distribution matching and refines details with inference-consistent adversarial distillation. Furthermore, we design a lightweight compensation module for Distill--Cache co-Training, which naturally incorporates block-level caching into our distillation pipeline.Experiments on SD3-Medium and SD3.5-Large show that 1.x-Distill surpasses prior few-step methods, achieving better quality and diversity at 1.67 and 1.74 effective NFEs, respectively, with up to 33x speedup over original 28x2 NFE sampling.

Shortcut models represent a promising, non-adversarial paradigm for generative modeling, uniquely supporting one-step, few-step, and multi-step sampling from a single trained network. However, their widespread adoption has been stymied by critical performance bottlenecks. This paper tackles the five core issues that held shortcut models back: (1) the hidden flaw of compounding guidance, which we are the first to formalize, causing severe image artifacts; (2) inflexible fixed guidance that restricts inference-time control; (3) a pervasive frequency bias driven by a reliance on low-level distances in the direct domain, which biases reconstructions toward low frequencies; (4) divergent self-consistency arising from a conflict with EMA training; and (5) curvy flow trajectories that impede convergence. To address these challenges, we introduce iSM, a unified training framework that systematically resolves each limitation. Our framework is built on four key improvements: Intrinsic Guidance provides explicit, dynamic control over guidance strength, resolving both compounding guidance and inflexibility. A Multi-Level Wavelet Loss mitigates frequency bias to restore high-frequency details. Scaling Optimal Transport (sOT) reduces training variance and learns straighter, more stable generative paths. Finally, a Twin EMA strategy reconciles training stability with self-consistency. Extensive experiments on ImageNet 256 x 256 demonstrate that our approach yields substantial FID improvements over baseline shortcut models across one-step, few-step, and multi-step generation, making shortcut models a viable and competitive class of generative models.

This paper introduces Bayesian Flow Networks (BFNs), a new class of generative model in which the parameters of a set of independent distributions are modified with Bayesian inference in the light of noisy data samples, then passed as input to a neural network that outputs a second, interdependent distribution. Starting from a simple prior and iteratively updating the two distributions yields a generative procedure similar to the reverse process of diffusion models; however it is conceptually simpler in that no forward process is required. Discrete and continuous-time loss functions are derived for continuous, discretised and discrete data, along with sample generation procedures. Notably, the network inputs for discrete data lie on the probability simplex, and are therefore natively differentiable, paving the way for gradient-based sample guidance and few-step generation in discrete domains such as language modelling. The loss function directly optimises data compression and places no restrictions on the network architecture. In our experiments BFNs achieve competitive log-likelihoods for image modelling on dynamically binarized MNIST and CIFAR-10, and outperform all known discrete diffusion models on the text8 character-level language modelling task.

Diffusion- and flow-based models have emerged as state-of-the-art generative modeling approaches, but they require many sampling steps. Consistency models can distill these models into efficient one-step generators; however, unlike flow- and diffusion-based methods, their performance inevitably degrades when increasing the number of steps, which we show both analytically and empirically. Flow maps generalize these approaches by connecting any two noise levels in a single step and remain effective across all step counts. In this paper, we introduce two new continuous-time objectives for training flow maps, along with additional novel training techniques, generalizing existing consistency and flow matching objectives. We further demonstrate that autoguidance can improve performance, using a low-quality model for guidance during distillation, and an additional boost can be achieved by adversarial finetuning, with minimal loss in sample diversity. We extensively validate our flow map models, called Align Your Flow, on challenging image generation benchmarks and achieve state-of-the-art few-step generation performance on both ImageNet 64x64 and 512x512, using small and efficient neural networks. Finally, we show text-to-image flow map models that outperform all existing non-adversarially trained few-step samplers in text-conditioned synthesis.

We present adversarial flow models, a class of generative models that unifies adversarial models and flow models. Our method supports native one-step or multi-step generation and is trained using the adversarial objective. Unlike traditional GANs, where the generator learns an arbitrary transport plan between the noise and the data distributions, our generator learns a deterministic noise-to-data mapping, which is the same optimal transport as in flow-matching models. This significantly stabilizes adversarial training. Also, unlike consistency-based methods, our model directly learns one-step or few-step generation without needing to learn the intermediate timesteps of the probability flow for propagation. This saves model capacity, reduces training iterations, and avoids error accumulation. Under the same 1NFE setting on ImageNet-256px, our B/2 model approaches the performance of consistency-based XL/2 models, while our XL/2 model creates a new best FID of 2.38. We additionally show the possibility of end-to-end training of 56-layer and 112-layer models through depth repetition without any intermediate supervision, and achieve FIDs of 2.08 and 1.94 using a single forward pass, surpassing their 2NFE and 4NFE counterparts.

The rapid development of generative models has significantly advanced image and video applications. Among these, video creation, aimed at generating videos under various conditions, has gained substantial attention. However, existing video creation models either focus solely on a few specific conditions or suffer from excessively long generation times due to complex model inference, making them impractical for real-world applications. To mitigate these issues, we propose an efficient unified video creation model, named VDOT. Concretely, we model the training process with the distribution matching distillation (DMD) paradigm. Instead of using the Kullback-Leibler (KL) minimization, we additionally employ a novel computational optimal transport (OT) technique to optimize the discrepancy between the real and fake score distributions. The OT distance inherently imposes geometric constraints, mitigating potential zero-forcing or gradient collapse issues that may arise during KL-based distillation within the few-step generation scenario, and thus, enhances the efficiency and stability of the distillation process. Further, we integrate a discriminator to enable the model to perceive real video data, thereby enhancing the quality of generated videos. To support training unified video creation models, we propose a fully automated pipeline for video data annotation and filtering that accommodates multiple video creation tasks. Meanwhile, we curate a unified testing benchmark, UVCBench, to standardize evaluation. Experiments demonstrate that our 4-step VDOT outperforms or matches other baselines with 100 denoising steps.

Continuous diffusion has been the foundation of high-fidelity, controllable, and few-step generation of many data modalities such as images. However, in language modeling, prior continuous diffusion language models (DLMs) lag behind discrete counterparts due to the sparse data space and the underexplored design space. In this work, we close this gap with LangFlow, the first continuous DLM to rival discrete diffusion, by connecting embedding-space DLMs to Flow Matching via Bregman divergence, alongside three key innovations: (1) we derive a novel ODE-based NLL bound for principled evaluation of continuous flow-based language models; (2) we propose an information-uniform principle for setting the noise schedule, which motivates a learnable noise scheduler based on a Gumbel distribution; and (3) we revise prior training protocols by incorporating self-conditioning, as we find it improves both likelihood and sample quality of embedding-space DLMs with effects substantially different from discrete diffusion. Putting everything together, LangFlow rivals top discrete DLMs on both the perplexity (PPL) and the generative perplexity (Gen. PPL), reaching a PPL of 30.0 on LM1B and 24.6 on OpenWebText. It even exceeds autoregressive baselines in zero-shot transfer on 4 out of 7 benchmarks. LangFlow provides the first clear evidence that continuous diffusion is a promising paradigm for language modeling. Homepage: https://github.com/nealchen2003/LangFlow

Interactive world models must support persistent memory, responsive interaction, and long-horizon generation, yet these requirements place conflicting demands on the model. Maintaining history in the denoiser context or key-value cache incurs growing cost, forcing a trade-off between session length and retained memory, while low-latency interaction relies on few-step generation whose capabilities are bounded by its teacher. Evoke addresses both limitations by externalizing persistent world state and redesigning the teacher for long-horizon interactive generation. Scene geometry is maintained in an external, camera-indexed world state bank, from which only view-relevant information is retrieved, keeping the denoiser context bounded as the session grows. Rather than treating the teacher as a fixed generator, we design it for long-horizon supervision: its sparse attention combines chunk-wise grouping, retrieval of selected distant frames, and a linear-attention global state, yielding linear growth in memory and compute while enabling supervision over long horizons. Such supervision exposes content drift that stays locally plausible within short windows, while per-chunk conditioning enables prompt changes and event control throughout the sequence. A 30-second distribution-matching objective, applied under self-forced rollouts, transfers both capabilities to a three-step student that uses no classifier-free guidance, improving resistance to long-term drift while preserving responsive conditioning. With bounded context and recurrent external memory, Evoke supports open-ended, continuously evolving generation; on a single H200 at 384times 640, each 1.5,s chunk is generated in 2.11,s. As a three-step world model, Evoke achieves state-of-the-art performance on WBench while remaining competitive on VBench-Long and VBench-2.0.

Masked diffusion models (MDMs) generate sequences by progressively unmasking several tokens per denoising step, but their reverse process is typically factorized over positions, limiting sample quality in the few-step regime where diffusion's speed advantage over autoregressive decoding matters most. A recent line of work introduces a continuous Gaussian latent, trained as a variational autoencoder, to capture correlations across positions, but such approaches are prone to posterior collapse, where the latent is silently ignored. We propose Enhanced Mixture-of-Experts (E-MoE), which builds the reverse process as a mixture of factorized distributions over a discrete shared latent given by the expert-routing decisions of a Mixture-of-Experts (MoE) backbone, without increasing active parameters over the factorized baseline. Across synthetic multi-modal benchmarks, binarized MNIST, and LM1B, E-MoE improves few-step generation over factorized baselines.

Rectified flow and reflow procedures have significantly advanced fast generation by progressively straightening ordinary differential equation (ODE) flows. They operate under the assumption that image and noise pairs, known as couplings, can be approximated by straight trajectories with constant velocity. However, we observe that modeling with constant velocity and using reflow procedures have limitations in accurately learning straight trajectories between pairs, resulting in suboptimal performance in few-step generation. To address these limitations, we introduce Constant Acceleration Flow (CAF), a novel framework based on a simple constant acceleration equation. CAF introduces acceleration as an additional learnable variable, allowing for more expressive and accurate estimation of the ODE flow. Moreover, we propose two techniques to further improve estimation accuracy: initial velocity conditioning for the acceleration model and a reflow process for the initial velocity. Our comprehensive studies on toy datasets, CIFAR-10, and ImageNet 64x64 demonstrate that CAF outperforms state-of-the-art baselines for one-step generation. We also show that CAF dramatically improves few-step coupling preservation and inversion over Rectified flow. Code is available at https://github.com/mlvlab/CAF{https://github.com/mlvlab/CAF}.

Diffusion models have achieved significant progress in both image and video generation while still suffering from huge computation costs. As an effective solution, flow matching aims to reflow the diffusion process of diffusion models into a straight line for a few-step and even one-step generation. However, in this paper, we suggest that the original training pipeline of flow matching is not optimal and introduce two techniques to improve it. Firstly, we introduce progressive reflow, which progressively reflows the diffusion models in local timesteps until the whole diffusion progresses, reducing the difficulty of flow matching. Second, we introduce aligned v-prediction, which highlights the importance of direction matching in flow matching over magnitude matching. Experimental results on SDv1.5 and SDXL demonstrate the effectiveness of our method, for example, conducting on SDv1.5 achieves an FID of 10.70 on MSCOCO2014 validation set with only 4 sampling steps, close to our teacher model (32 DDIM steps, FID = 10.05).

Majorities of distillation methods on pre-trained diffusion models or on pre-trained rectified flow, focus on either the distillation outputs or the trajectories between random noises and clean images to speed up sample generations from pre-trained models. In those trajectory-based distillation methods, consistency distillation requires the self-consistent trajectory projection to regulate the trajectory, which might avoid the common ODE approximation error {while still be concerning about sampling efficiencies}. At the same time, rectified flow distillations enforce straight trajectory for fast sampling, although an ODE solver is still required. In this work, we propose a trajectory distillation method, \modelname, that enjoys the benefits of both and enables few-step generations. TraFlow adopts the settings of consistency trajectory models, and further enforces the properties of self-consistency and straightness throughout the entire trajectory. These two properties are pursued by reaching a balance with following three targets: (1) reconstruct the output from pre-trained models; (2) learn the amount of changes by pre-trained models; (3) satisfy the self-consistency over its trajectory. Extensive experimental results have shown the effectiveness of our proposed method.

Timestep distillation is an effective approach for improving the generation efficiency of diffusion models. The Consistency Model (CM), as a trajectory-based framework, demonstrates significant potential due to its strong theoretical foundation and high-quality few-step generation. Nevertheless, current continuous-time consistency distillation methods still rely heavily on training data and computational resources, hindering their deployment in resource-constrained scenarios and limiting their scalability to diverse domains. To address this issue, we propose Trajectory-Backward Consistency Model (TBCM), which eliminates the dependence on external training data by extracting latent representations directly from the teacher model's generation trajectory. Unlike conventional methods that require VAE encoding and large-scale datasets, our self-contained distillation paradigm significantly improves both efficiency and simplicity. Moreover, the trajectory-extracted samples naturally bridge the distribution gap between training and inference, thereby enabling more effective knowledge transfer. Empirically, TBCM achieves 6.52 FID and 28.08 CLIP scores on MJHQ-30k under one-step generation, while reducing training time by approximately 40% compared to Sana-Sprint and saving a substantial amount of GPU memory, demonstrating superior efficiency without sacrificing quality. We further reveal the diffusion-generation space discrepancy in continuous-time consistency distillation and analyze how sampling strategies affect distillation performance, offering insights for future distillation research. GitHub Link: https://github.com/hustvl/TBCM.

Flow Matching (FM) constructs linear conditional probability paths, but the learned marginal velocity field inevitably exhibits strong curvature due to trajectory superposition. This curvature severely inflates numerical truncation errors, bottlenecking few-step sampling. To overcome this, we introduce Isokinetic Flow Matching (Iso-FM), a lightweight, Jacobian-free dynamical regularizer that directly penalizes pathwise acceleration. By using a self-guided finite-difference approximation of the material derivative Dv/Dt, Iso-FM enforces local velocity consistency without requiring auxiliary encoders or expensive second-order autodifferentiation. Operating as a pure plug-and-play addition to single-stage FM training, Iso-FM dramatically improves few-step generation. On CIFAR-10 (DiT-S/2), Iso-FM slashes conditional non-OT FID at 2 steps from 78.82 to 27.13 - a 2.9x relative efficiency gain - and reaches a best-observed FID at 4 steps of 10.23. These results firmly establish acceleration regularization as a principled, compute-efficient mechanism for fast generative sampling.

Embodied world models learn to predict future physical dynamics from visual observations and control signals, where physical knowledge is implicitly entangled within latent representations. We introduce CausalWM, a 16B embodied world model that performs explicit causal chain-of-thought reasoning before future video prediction. CausalWM organizes useful variables into a reasoning trajectory, allowing the model to progressively capture causal dependencies underlying physical evolution. To train CausalWM, we collect 31K hours embodied data and develop a three-stage paradigm consisting of large-scale video pre-training, causal CoT mid-training, and multi-objective RL post-training. Despite using only a limited set of supervised CoT variables, CausalWM exhibits emergent in-context learning capabilities, enabling contextual visual feature guidance and efficient few-step generation. CausalWM achieves state-of-the-art performance across language-conditioned, action-conditioned, single-view and multi-view benchmarks, including Top-1 performance on TriWorldBench leaderboard.

Flow and diffusion models suffer from slow inference due to computationally expensive numerical integration. Distillation provides a promising way for a student model to learn from a teacher's dynamics, enabling one-step or few-step generation. However, existing methods often depend on curated distillation datasets, costly teacher rollouts, or auxiliary proxy networks, which complicate model training and scaling. In this work, we propose Consistent Distribution Matching, a simulation-free and data-free distillation method for accelerating diffusion and flow models while preserving strong generative capacity. Our key insight is to unify sample generation and score estimation with one student network. Thus, our framework uses only two models, a frozen teacher and a trainable student, and optimizes one objective. We prove that minimizing our objective indicates Wasserstein convergence of the student flow-map pushforwards to the teacher marginals. On ImageNet 256times256, our method attains an FID of 2.04 with a single function evaluation (1-NFE) and a 4-NFE FID of 1.37 within 40 epochs of training, surpassing the state-of-the-art distillation baselines without data. Our code code and model are available at https://consistentdmd.github.io/.

Flow-based 3D generation models typically require dozens of sampling steps during inference. Though few-step distillation methods, particularly Consistency Models (CMs), have achieved substantial advancements in accelerating 2D diffusion models, they remain under-explored for more complex 3D generation tasks. In this study, we propose a novel framework, MDT-dist, for few-step 3D flow distillation. Our approach is built upon a primary objective: distilling the pretrained model to learn the Marginal-Data Transport. Directly learning this objective needs to integrate the velocity fields, while this integral is intractable to be implemented. Therefore, we propose two optimizable objectives, Velocity Matching (VM) and Velocity Distillation (VD), to equivalently convert the optimization target from the transport level to the velocity and the distribution level respectively. Velocity Matching (VM) learns to stably match the velocity fields between the student and the teacher, but inevitably provides biased gradient estimates. Velocity Distillation (VD) further enhances the optimization process by leveraging the learned velocity fields to perform probability density distillation. When evaluated on the pioneer 3D generation framework TRELLIS, our method reduces sampling steps of each flow transformer from 25 to 1 or 2, achieving 0.68s (1 step x 2) and 0.94s (2 steps x 2) latency with 9.0x and 6.5x speedup on A800, while preserving high visual and geometric fidelity. Extensive experiments demonstrate that our method significantly outperforms existing CM distillation methods, and enables TRELLIS to achieve superior performance in few-step 3D generation.

Video diffusion and flow models require many sequential evaluations, making generation computationally expensive. Few-step distillation reduces this cost but poses a capacity allocation problem: a student must match the teacher's iterative generation with far less sequential computation. Existing trajectory methods ask the student to reproduce teacher transitions that are highly curved at high noise, which can exceed its capacity and degrade fine detail. We introduce Parametric Trajectory Distillation (PTD), which lets the student parameterize teacher trajectory segments as polynomials and learn from teacher guidance along its own predicted path. PTD is designed to let the learned curvature adapt to the backbone's predictive capacity, preserving motion and diversity. The curvature head is used only in training; inference keeps the original backbone architecture. On Wan2.1-14B, four-step PTD sets a new state of the art for trajectory distillation, significantly improving dynamic quality and naturalness over PDD, the best-performing trajectory-only method on this model, under the same training setting. On the 33B audio-video MiniMax-H3, LoRA-trained PTD significantly improves diversity and naturalness over the state-of-the-art LightX2V Turbo. Blinded human votes give PTD 55.1% and 63.4% preference shares against PDD and LightX2V Turbo. Project page: https://alan-lanfeng.github.io/PTD/.

Streaming video generation has benefited from distribution matching distillation (DMD), which matches the joint distribution of video frames to a video teacher's approximation of the real video distribution. Although this joint matching mitigates drift during autoregressive rollouts, limitations remain in visual quality and semantic alignment. To address these limitations, we propose DuoMatching, a distribution matching framework that approximates the real video distribution through a unified joint-marginal formulation. On top of existing joint matching formulations, the additional marginal matching objective provides dedicated frame-level supervision from an image generator, transferring complementary visual and semantic priors from it. To apply this frame-level supervision in video generation, we introduce LatentBridge to resolve the latent representation mismatch between the video student and the image teacher. Latent Variation Sampling further distributes such frame-level supervision across distinct temporal segments, reducing redundancy. Experiments demonstrate that DuoMatching improves visual quality, composition, and semantic alignment while largely preserving motion dynamics. Human evaluations show overall preference rates above 80% against all evaluated baselines. The project page is available at https://johnzhan2023.github.io/DuoMatching/.

Video creation spans text-to-video (T2V), image-to-video (I2V), and condition-based generation, yet video diffusion models remain costly because they repeatedly evaluate large backbones during sampling. Distribution matching distillation (DMD) reduces this cost, but its reverse Kullback--Leibler (KL) objective can provide unstable or incomplete guidance when the student and teacher distributions have limited overlap. VDOT addressed this issue by adding optimal transport distillation (OTD), whose explicit coupling supplies geometric directions for condition-based generation. Balanced OTD, however, performs full-mass matching between the spatial tokens of each corresponding student--teacher frame pair. This assumption weakens for T2V and I2V, where one condition admits many valid outputs and spatial content need not align across different realizations. We present VDOT++, a unified distillation framework that applies the same training recipe separately to generators for the three task families. It makes OTD robust to output diversity through an asymmetric unbalanced formulation that allows unreliable student tokens to carry less mass while maintaining coverage of the teacher tokens. An ell_1 ground cost further replaces mean-based aggregation with a more mode-preserving weighted median that limits the influence of distant transport targets. The two changes respectively determine whom to match and how the selected targets should be aggregated. We additionally combine distribution matching and adversarial refinement through sequential backward passes, and exploit the decoupled score networks for cross-scale distillation, where larger score networks improve a compact generator. Experiments on UVCBench, VBench, VBench-I2V, and the VACE benchmark show that the resulting four-step generators are competitive with many-step teachers and strong few-step baselines across all three task families.

Diffusion Models have emerged as a leading class of generative models, yet their iterative sampling process remains computationally expensive. Timestep distillation is a promising technique to accelerate generation, but it often requires extensive training and leads to image quality degradation. Furthermore, fine-tuning these distilled models for specific objectives, such as aesthetic appeal or user preference, using Reinforcement Learning (RL) is notoriously unstable and easily falls into reward hacking. In this work, we introduce Flash-DMD, a novel framework that enables fast convergence with distillation and joint RL-based refinement. Specifically, we first propose an efficient timestep-aware distillation strategy that significantly reduces training cost with enhanced realism, outperforming DMD2 with only 2.1% its training cost. Second, we introduce a joint training scheme where the model is fine-tuned with an RL objective while the timestep distillation training continues simultaneously. We demonstrate that the stable, well-defined loss from the ongoing distillation acts as a powerful regularizer, effectively stabilizing the RL training process and preventing policy collapse. Extensive experiments on score-based and flow matching models show that our proposed Flash-DMD not only converges significantly faster but also achieves state-of-the-art generation quality in the few-step sampling regime, outperforming existing methods in visual quality, human preference, and text-image alignment metrics. Our work presents an effective paradigm for training efficient, high-fidelity, and stable generative models. Codes are coming soon.

Few-step autoregressive (AR) video diffusion enables low-latency streaming generation, but existing post-training methods predominantly rely on Distribution Matching Distillation (DMD), requiring both a large pretrained teacher and an online critic to estimate distributional discrepancies through diffusion scores. In this work, we ask whether this resource-intensive teacher--critic stack can be eliminated by post-training only the generator against a precomputed target distribution. Drawing inspiration from representation distribution matching (RDM) for one-step image generation, we systematically study its transfer to few-step causal video generation and identify three key barriers: a memory-intractable gradient path, a distinct video optimization regime, and representation distributions that underconstrain temporal dynamics. We introduce ViRDM, a teacher- and critic-free video post-training recipe that addresses these barriers sequentially. By coupling RDM with stochastically truncated clean-exit supervision, a lightweight VAE decoder, and staged vector--Jacobian products, ViRDM makes representation distribution matching memory-feasible for multi-step causal video rollouts. We further establish effective generated-population and initialization regimes for video RDM, and introduce lightweight dynamics regularization to compensate for the underconstrained temporal dynamics. ViRDM turns three-network distillation into generator-only post-training, reducing GPU memory use and training time while improving video quality. With only 20 generator updates, the recipe reaches 84.87 on the official VBench evaluation, outperforming the previous best few-step causal baseline by 0.36, while requiring 16 A100 GPU-hours. We additionally report exploratory results demonstrating the potential of the same recipe for lower causal sampling budget and for one-, two-, and four-step bidirectional generation.

Recent progress has shown promise in distilling multi-step video diffusion models into efficient few-step students. Among them, Distribution Matching Distillation (DMD) and its successor DMD2 achieved strong generation quality and fast convergence. However, due to the nature of the reverse Kullback--Leibler (KL) objective, these methods exhibit two persistent failure modes: a substantial drop in sample diversity, and visibly over-saturated outputs that deviate from real-video appearance. In this work, we propose Data-Forcing Distillation (DFD), a simple post-training framework that restores diversity and fidelity in DMD with only a single-line of code change. At its core is the teacher score discrepancy to guide the student toward the real-data distribution, pulling it to missing modes (mitigating mode collapse) and away from problematic modes absent in real data (avoiding over-saturation). We provide an in-depth theoretical analysis of our framework and validate our approach on text-to-video, image-to-video, and autoregressive video generation. With only 100--300 steps of finetuning, DFD effectively restores diversity and fidelity on both Wan2.1-1.3B and Cosmos-Predict2.5-2B model, resolving the over-saturation artifacts with significantly better video dynamics and appearance, and even outperforms the teacher model.

We introduce Value Sign Flip (VSF), a simple and efficient method for incorporating negative prompt guidance in few-step diffusion and flow-matching image generation models. Unlike existing approaches such as classifier-free guidance (CFG), NASA, and NAG, VSF dynamically suppresses undesired content by flipping the sign of attention values from negative prompts. Our method requires only small computational overhead and integrates effectively with MMDiT-style architectures such as Stable Diffusion 3.5 Turbo, as well as cross-attention-based models like Wan. We validate VSF on challenging datasets with complex prompt pairs and demonstrate superior performance in both static image and video generation tasks. Experimental results show that VSF significantly improves negative prompt adherence compared to prior methods in few-step models, and even CFG in non-few-step models, while maintaining competitive image quality. Code and ComfyUI node are available in https://github.com/weathon/VSF/tree/main.

Recent advances in few-step diffusion distillation have enabled efficient image generation, yet aligning these models with human preferences remains challenging. We propose Reward-Tilted Distribution Matching Distillation (RTDMD), a two-stage framework that unifies distribution matching distillation with reward-guided reinforcement learning for few-step flow generators. We show that minimizing the KL divergence to a reward-tilted teacher distribution naturally decomposes into a distribution matching term and a reward maximization term. In the first stage, we introduce Ambient-Consistent Distribution Matching Distillation (AC-DMD), which performs subinterval-wise distribution matching and augments the fake score objective with a consistency regularizer to help the fake score model track the shifting generator distribution under limited updates. In the second stage, we jointly optimize both terms: for the reward maximization term, we derive a hybrid policy gradient that combines a GRPO-style estimator for the stochastic intermediate transitions with direct reward backpropagation through the deterministic final step, and further introduce step-subset GRPO (SubGRPO) to reduce variance. Experiments on SD3, SD3.5, and FLUX.2 demonstrate that RTDMD establishes new state-of-the-art results across preference, aesthetic, and compositional metrics with only 4 inference steps, outperforming previous few-step text-to-image generation methods. Code and models are available at https://github.com/Harahan/RTDMD.

Action-conditioned video world models require low-latency causal generation and reliable responses to game-native controls. Although causal distillation enables one- or few-step video synthesis, extending it to interactive world models remains challenging, as discrete keyboard states and continuous mouse motion must remain aligned with temporally compressed latent chunks during causal training and autoregressive rollout. We introduce ForgeWM, a progressive framework that transforms a bidirectional action-conditioned video generator into efficient few-step world models through domain adaptation, teacher-forced causal training, causal consistency distillation, and on-policy distribution matching with a bidirectional teacher. The resulting budget-specialized students operate at steady-state denoising budgets of 1, 2, and 4 steps. ForgeWM further supports a dual-path deployment protocol combining latency-critical interaction with optional replay-time refinement, where the one-step student re-noises and refines its saved draft. On paired Minecraft trajectories, ForgeWM leads the evaluated systems in Imaging Quality, reference-aligned motion-profile agreement, action-sign accuracy, and mouse-control accuracy, while achieving the lowest reference LPIPS; the same four-stage recipe transfers to gamepad-controlled FPS gameplay. Replay-time refinement matches four-step reference quality while remaining roughly three times closer to the experienced trajectory than regeneration from noise. These results demonstrate ForgeWM's effectiveness for controllable few-step video generation.

Step distillation has become a leading technique for accelerating diffusion models, among which Distribution Matching Distillation (DMD) and Consistency Distillation are two representative paradigms. While consistency methods enforce self-consistency along the full PF-ODE trajectory to steer it toward the clean data manifold, vanilla DMD relies on sparse supervision at a few predefined discrete timesteps. This restricted discrete-time formulation and mode-seeking nature of the reverse KL divergence tends to exhibit visual artifacts and over-smoothed outputs, often necessitating complex auxiliary modules -- such as GANs or reward models -- to restore visual fidelity. In this work, we introduce Continuous-Time Distribution Matching (CDM), migrating the DMD framework from discrete anchoring to continuous optimization for the first time. CDM achieves this through two continuous-time designs. First, we replace the fixed discrete schedule with a dynamic continuous schedule of random length, so that distribution matching is enforced at arbitrary points along sampling trajectories rather than only at a few fixed anchors. Second, we propose a continuous-time alignment objective that performs active off-trajectory matching on latents extrapolated via the student's velocity field, improving generalization and preserving fine visual details. Extensive experiments on different architectures, including SD3-Medium and Longcat-Image, demonstrate that CDM provides highly competitive visual fidelity for few-step image generation without relying on complex auxiliary objectives. Code is available at https://github.com/byliutao/cdm.

Few-step video generation has been significantly advanced by consistency distillation. However, the performance of consistency-distilled models often degrades as more sampling steps are allocated at test time, limiting their effectiveness for any-step video diffusion. This limitation arises because consistency distillation replaces the original probability-flow ODE trajectory with a consistency-sampling trajectory, weakening the desirable test-time scaling behavior of ODE sampling. To address this limitation, we introduce AnyFlow, the first any-step video diffusion distillation framework based on flow maps. Instead of distilling a model for only a few fixed sampling steps, AnyFlow optimizes the full ODE sampling trajectory. To this end, we shift the distillation target from endpoint consistency mapping (z_{t}rightarrow z_{0}) to flow-map transition learning (z_{t}rightarrow z_{r}) over arbitrary time intervals. We further propose Flow Map Backward Simulation, which decomposes a full Euler rollout into shortcut flow-map transitions, enabling efficient on-policy distillation that reduces test-time errors (i.e., discretization error in few-step sampling and exposure bias in causal generation). Extensive experiments across both bidirectional and causal architectures, at scales ranging from 1.3B to 14B parameters, demonstrate that AnyFlow achieves performance matches or surpasses consistency-based counterparts in the few-step regime, while scaling with sampling step budgets.

Few-step image generation has seen rapid progress, with consistency and meanflow-based methods significantly reducing the number of sampling steps. Despite their low inference cost, these approaches often suffer from training instability and limited scalability. Sphere Encoder is a recent alternative that produces high-quality images in only a few steps; however, it requires repeated transitions between the pixel space and latent space during inference while jointly optimizing reconstruction and generation within a single architecture. This design leads to computational inefficiency and objective conflict between reconstruction and generation. To address these limitations, we decouple the framework into a fixed pretrained image encoder and a separate latent denoising model trained entirely in a spherical latent space. Our approach eliminates repeated pixel-space operations during training and inference, improving efficiency and allowing reconstruction and generation to specialize independently. On Animal-Faces, Oxford-Flowers and ImageNet-1K datasets, our method significantly outperforms Sphere Encoder in both generation quality and inference speed, while achieving competitive results against strong few-step and multi-step baselines.

Distilling pretrained video diffusion models into few-step autoregressive (AR) generators typically combines student initialization with distribution matching distillation (DMD). An intermediate AR teacher can provide causally compatible targets for ODE initialization. However, causally compatible targets alone do not ensure high-quality generation under a short sampling schedule. We analyze the posterior-mean predictions favored by direct latent regression and empirically find that causal ODE initialization alleviates blur but still leaves fine detail unresolved. To address this limitation, we propose Representation Forcing, which learns few-step causal initialization through representation-space supervision rather than intermediate-teacher trajectory regression. The student is trained with teacher forcing by comparing clean predictions and training targets through normalized features of a frozen video diffusion transformer. This phase reuses the synthetic videos generated by a bidirectional model for AR teacher training and replaces both teacher training and causal ODE distillation, without generating additional causal ODE trajectories. The subsequent asymmetric DMD procedure remains unchanged. Empirical results show that, at four sampling steps, RepForcing better preserves generation quality than intermediate-teacher-based initialization before DMD. After DMD, our four-step chunk-wise model improves VBench Total from 84.04 to 84.66 (+0.62 points) and VisionReward from 6.326 to 10.074 (+59.25%) over the reported causal-ODE-based baseline.

Distribution matching distillation (DMD) provides a general framework for few-step diffusion generation, but its modern text-to-image instantiations have been developed primarily around latent diffusion. It therefore overlooks key properties and design opportunities of native RGB. We revisit two DMD interfaces for pixel-space teachers. On the teacher-matching side, diagnostics show low-noise RGB matching is dominated by a local-texture cue, motivating a fixed high-noise matching band. On the real-data side, native clean-RGB outputs allow guidance from an external visual representation without traversing a decoder or sharing the heavy fake-score critic. DINO-Adv removes this critic from the adversarial gradient path and supplies local parametric patch guidance. For distribution-level guidance, we introduce AF-Loss, a parameter-free auxiliary semantic distribution-field objective designed for text-to-image DMD. It operates on detached rolling real and generated supports in the shared DINOv2 space while preserving prompt-conditioned teacher supervision. AF-Loss adds no learnable parameters or inference-time computation. Together these designs form DMA^2. Across DPG-Bench, GenEval, VQAScore, and COCO30K, the four-step DMA^2 student performs better than the 25-step teacher and evaluated few-step distillers.

Distributional Diffusion Models (DDMs) replace the standard mean-prediction denoiser with a distributional denoiser trained via a scoring rule objective, learning a stochastic approximation to p(x_1 mid x_t) rather than its conditional mean. However, scaling DDMs to modern image-generation settings faces two obstacles: (i) multi-particle training incurs overhead that scales with the number of particles, (ii) DDMs use globally fixed scoring rule hyperparameters, forcing a single trade-off across sampling budgets. We mitigate these limitations by deferring particle expansion to late transformer layers, and the hyperparameter trade-off by introducing time-dependent scoring rule schedules informed by the dynamical regimes of~Biroli2024. Combined with a DiT-based latent setup, these changes make DDM training practical on class-conditional ImageNet-256^2, achieving 4.48 FID at 4 steps and 2.38 at 50 steps with DiT-XL/2, from a single model trained from scratch in one stage, without a teacher, self-distillation or JVPs. The result is a stochastic few-step generator whose FID does not degrade as the sampling budget grows from 4 to 50 NFE, and the same recipe transfers to text-to-image generation. Code and pre-trained models available at https://github.com/CompVis/iDDM.

Robotic manipulation requires anticipating how the environment evolves in response to actions, yet most existing systems lack this predictive capability, often resulting in errors and inefficiency. While Vision-Language Models (VLMs) provide high-level guidance, they cannot explicitly forecast future states, and existing world models either predict only short horizons or produce spatially inconsistent frames. To address these challenges, we propose a framework for fast and predictive video-conditioned action. Our approach first selects and adapts a robust video generation model to ensure reliable future predictions, then applies adversarial distillation for fast, few-step video generation, and finally trains an action model that leverages both generated videos and real observations to correct spatial errors. Extensive experiments show that our method produces temporally coherent, spatially accurate video predictions that directly support precise manipulation, achieving significant improvements in embodiment consistency, spatial referring ability, and task completion over existing baselines. Codes & Models will be released.

We present AnimateDiff-Lightning for lightning-fast video generation. Our model uses progressive adversarial diffusion distillation to achieve new state-of-the-art in few-step video generation. We discuss our modifications to adapt it for the video modality. Furthermore, we propose to simultaneously distill the probability flow of multiple base diffusion models, resulting in a single distilled motion module with broader style compatibility. We are pleased to release our distilled AnimateDiff-Lightning model for the community's use.

Diffusion-based generative models have demonstrated their powerful performance across various tasks, but this comes at a cost of the slow sampling speed. To achieve both efficient and high-quality synthesis, various distillation-based accelerated sampling methods have been developed recently. However, they generally require time-consuming fine tuning with elaborate designs to achieve satisfactory performance in a specific number of function evaluation (NFE), making them difficult to employ in practice. To address this issue, we propose Simple and Fast Distillation (SFD) of diffusion models, which simplifies the paradigm used in existing methods and largely shortens their fine-tuning time up to 1000times. We begin with a vanilla distillation-based sampling method and boost its performance to state of the art by identifying and addressing several small yet vital factors affecting the synthesis efficiency and quality. Our method can also achieve sampling with variable NFEs using a single distilled model. Extensive experiments demonstrate that SFD strikes a good balance between the sample quality and fine-tuning costs in few-step image generation task. For example, SFD achieves 4.53 FID (NFE=2) on CIFAR-10 with only 0.64 hours of fine-tuning on a single NVIDIA A100 GPU. Our code is available at https://github.com/zju-pi/diff-sampler.

World-action models (WAMs) transfer visual and motion priors from pretrained video generators to robot control by jointly modeling visual dynamics and actions. Existing WAMs, however, predict dense future frames during training, repeatedly modeling largely unchanged content and coupling action-conditioned dynamics to nuisance appearance variations. At inference, processing each complete observation with the heavy video expert bottlenecks few-step action generation. Accordingly, we propose DeltaWAM, which jointly predicts visual deltas and actions using dense-anchor, sparse-delta, and action streams, with three architectures that differ in representation and computation sharing. We further develop Streaming Delta Memory (SDM), which updates cached anchor context with compact observed deltas, reducing heavy video-expert processing. On RoboTwin, DeltaWAM with SDM improves average success over Fast-WAM from 81.3% to 85.4% in the clean setting and from 75.8% to 83.9% under visual randomization. The three architectures reduce training FLOPs by 17.78-23.77%, while SDM reduces one-step inference latency and FLOPs by 36.57% and 31.55%, respectively; real-world evaluations further show the highest overall success rate and normalized progress among the evaluated policies. Code: https://github.com/AIGeeksGroup/DeltaWAM. Website: https://aigeeksgroup.github.io/DeltaWAM.

Generative models have emerged as a powerful paradigm for solving physics systems and modeling complex spatiotemporal dynamics. However, achieving high physical accuracy without incurring high computational cost remains a fundamental challenge, as existing approaches face a critical speed-fidelity trade-off. In this work, we introduce Recursive Flow Matching (RecFM), a generative framework for forecasting complex spatiotemporal dynamics. RecFM enforces self-consistency to align trajectories across discretization scales, reducing discretization errors and improving performance across metrics for physics-based tasks. To our knowledge, this is the first method to achieve high-fidelity one- and few-step (2-4 step) dynamic generation for scientific systems with performance comparable to state-of-the-art multi-step solvers. Across challenging scientific benchmarks, RecFM achieves up to a 20times speedup over leading diffusion-based emulators while improving predictive accuracy. Furthermore, RecFM reduces mean squared error by over 15% compared to vanilla flow matching, offering a scalable and efficient solution for real-time scientific emulation.

Current few-step autoregressive video diffusion models depend on previous fully denoised clean frames as context for all denoising steps of the current frame. However, these clean frames leak excessive local details, which causes the model to take shortcuts, resulting in compromised temporal semantics and dynamics. Inspired by the perspective of diffusion as masking, we explore the impact of noisy contexts on few-step autoregressive generation. Yet, simply applying contexts with the same noise levels provides insufficient guidance, leading to poor temporal consistency. To resolve this dilemma, we introduce In-Context Forcing, a progressive autoregressive paradigm that utilizes contexts with decreasing noise levels. By applying less masking to distant frames and more masking to adjacent ones, this approach provides adaptive guidance, effectively ensuring both robust temporal consistency and high inter-frame dynamics. Furthermore, by decoupling the strict dependence on previous clean frames, our paradigm enables cross-frame parallel denoising, achieving substantial inference acceleration without sacrificing performance. Extensive experiments on VBench demonstrate that our method significantly outperforms state-of-the-art approaches in both visual fidelity and inference speed.

In latest years plethora of identity-preserving adapters for a personalized generation with diffusion models have been released. Their main disadvantage is that they are dominantly trained jointly with base diffusion models, which suffer from slow multi-step inference. This work aims to tackle the challenge of training-free adaptation of pretrained ID-adapters to diffusion models accelerated via distillation - through careful re-design of classifier-free guidance for few-step stylistic generation and attention manipulation mechanisms in decoupled blocks to improve identity similarity and fidelity, we propose universal FastFace framework. Additionally, we develop a disentangled public evaluation protocol for id-preserving adapters.

Few-step streaming audio--video generation requires both causal modeling and step distillation, yet standard training recipes face two context-related challenges. Teacher forcing pairs clean history with a noisy target, but supervises predictive contextual representations only indirectly through velocity prediction. Meanwhile, directly reusing bidirectional score models in causal Distribution Matching Distillation (DMD) creates a mismatch between generation and scoring contexts. We address these challenges with Salt++, a two-stage post-training framework comprising Causal Self-Flow (CSF) and context-aligned autoregressive DMD. CSF exploits contextual information asymmetry by varying the history while keeping the noisy target fixed: a noise-mixed-history student aligns its intermediate representations with those of a clean-history exponential-moving-average teacher. This self-supervised signal encourages the student to extract semantic information and improves cross-modal alignment. Context-aligned AR DMD shares the causal mask and prefix across generator sampling, fake-score training, and real-score evaluation to match generated and reference distributions under a block-conditional KL objective. With calibrated teacher guidance, it performs clean-prefix few-step distillation and then adapts to generated histories without switching objectives or requiring separate consistency distillation. At 480p, Salt++ improves visual and motion quality by 57% and 45% over OmniForcing on JavisBench under the same 4-step causal setting. A separate scale-wise post-training stage extends Salt++ to 4-step 1664times960 generation, outperforming bidirectional LTX-2 on six of seven reported metrics. Project page: https://xingtongge.github.io/Saltpp

Recent advances in trajectory-controllable video generation have achieved remarkable progress. Previous methods mainly use adapter-based architectures for precise motion control along predefined trajectories. However, all these methods rely on a multi-step denoising process, leading to substantial time redundancy and computational overhead. While existing video distillation methods successfully distill multi-step generators into few-step, directly applying these approaches to trajectory-controllable video generation results in noticeable degradation in both video quality and trajectory accuracy. To bridge this gap, we introduce FlashMotion, a novel training framework designed for few-step trajectory-controllable video generation. We first train a trajectory adapter on a multi-step video generator for precise trajectory control. Then, we distill the generator into a few-step version to accelerate video generation. Finally, we finetune the adapter using a hybrid strategy that combines diffusion and adversarial objectives, aligning it with the few-step generator to produce high-quality, trajectory-accurate videos. For evaluation, we introduce FlashBench, a benchmark for long-sequence trajectory-controllable video generation that measures both video quality and trajectory accuracy across varying numbers of foreground objects. Experiments on two adapter architectures show that FlashMotion surpasses existing video distillation methods and previous multi-step models in both visual quality and trajectory consistency.

Autoregressive video generation models generate videos sequentially, with each new block conditioned on previously generated blocks. By training on the model's own rollouts, Self Forcing and its follow-up methods substantially mitigate exposure bias caused by the mismatch between training- and inference-time history distributions. However, these models still suffer from error accumulation during long-horizon generation. We identify a key underlying limitation: the model remains highly sensitive to errors in its generated history, allowing small deviations to be amplified through subsequent generations. We refer to this underexplored problem as the local history robustness gap. To address this gap, we introduce Adversarial Gradient Forcing (AGF), a framework designed to improve the robustness of few-step autoregressive video models to perturbations and accumulated errors in their own generated histories. AGF uses distribution matching gradients from future block predictions to select adversarial perturbations of self-generated histories. It then jointly trains the generator on the original and perturbed histories to improve the robustness of future generation. Extensive experiments show that AGF achieves the highest VBench Total score on 60-second video generation and the best visual quality on four-minute video generation. Notably, AGF achieves such long-horizon robustness while requiring only 5-second rollouts for training.

Recent advances have substantially improved real-time interactive video generation in the autoregressive regime. However, most existing few-step autoregressive video generation methods, often distilled from a corresponding many-step teacher, default to a 4-step sampling configuration, which still incurs considerable latency during deployment and suffers from severe quality degradation when the number of sampling steps is further reduced, particularly in the one-step setting. Trajectory-style consistency distillation methods often produce videos with weak dynamics, while DMD-based approaches, such as Self-Forcing, tend to yield blurry frames. To address this challenge, we propose One-Forcing, a simple yet effective approach which augments the DMD objective with an auxiliary GAN loss for high-quality and efficient one-step video generation. Experiments on VBench show that One-Forcing achieves a total score of 83.76, establishing state-of-the-art performance among one-step causal video generation methods and remaining competitive with strong many-step approaches. We further demonstrate that one-step framewise autoregressive generation can be achieved stably with merely one-third of the training cost of the chunkwise model, a setting that prior methods have failed to achieve successfully.

Recent hybrid video generation models combine autoregressive temporal dynamics with diffusion-based spatial denoising, but their sequential, iterative nature leads to error accumulation and long inference times. In this work, we propose a distillation-based framework for efficient causal video generation that enables high-quality synthesis with extremely limited denoising steps. Our approach builds upon the Distribution Matching Distillation (DMD) framework and proposes a novel Adversarial Self-Distillation (ASD) strategy, which aligns the outputs of the student model's n-step denoising process with its (n+1)-step version at the distribution level. This design provides smoother supervision by bridging small intra-student gaps and more informative guidance by combining teacher knowledge with locally consistent student behavior, substantially improving training stability and generation quality in extremely few-step scenarios (e.g., 1-2 steps). In addition, we present a First-Frame Enhancement (FFE) strategy, which allocates more denoising steps to the initial frames to mitigate error propagation while applying larger skipping steps to later frames. Extensive experiments on VBench demonstrate that our method surpasses state-of-the-art approaches in both one-step and two-step video generation. Notably, our framework produces a single distilled model that flexibly supports multiple inference-step settings, eliminating the need for repeated re-distillation and enabling efficient, high-quality video synthesis.

Few-step autoregressive video generation commonly relies on Distribution Matching Distillation (DMD), requiring a bidirectional diffusion teacher and an online fake-score model. We instead learn the rollout distribution directly from reference videos, eliminating both score models during post-training. Our framework minimizes maximum mean discrepancy (MMD) in frozen self-supervised video representation spaces, using a hybrid Nyström--Monte Carlo estimator to balance approximation bias and sampling variance. Memory-efficient replay and gradient subsampling make this objective practical. Using the same architecture and initialization as Self-Forcing, our 1.3B model improves the VBench Total score from 83.80 to 84.64 while retaining 17 FPS. Removing auxiliary score models also enables 14B post-training on eight H200 GPUs. Beyond distillation, learning from reference videos enables the acquisition of new visual styles, semantic concepts, and spatial priors without a target-specific diffusion teacher.

Few-step autoregressive video generators enable streaming generation, yet they run every token through the final denoising step, regardless of how much refinement it needs. We find this uniform computation is often unnecessary: many tokens already closely match their eventual full-step outputs in the initial steps, while others require refinement until the end. We introduce Speculative Forcing, a framework that treats intermediate clean estimates as drafts and predicts when individual tokens can be safely accepted early. Once accepted, a token is frozen as its final output and undergoes no further denoising, while its cached keys and values remain available as context for the remaining tokens. We explore two alternative verifier designs: a training-free one based on similarity to clean content and stability across steps, and a learned one that reads the frozen generator's intermediate features to estimate each token's remaining gap to its full-step output. Across short-video, long-video, and world generation, Speculative Forcing preserves the quality of full-step sampling while substantially reducing computation. On LongLive, it matches the four-step generator with ~1.7 denoising steps per token, running over 1.5x faster at 41.7 and 37.8 fps. On Lingbot-World 2.0, where camera motion continually changes the visible content, it maintains quality with ~2.5 denoising steps per token and runs 1.35x faster at 24.5 fps.

Interactive video generation and editing are becoming increasingly important for creative design. In this report, we introduce EditStream: a unified framework for interactive video generation and editing. EditStream unifies multiple video creation and manipulation tasks within a single DiT-based model through flexible task-specific conditioning, and further transforms it into a fast, few-step autoregressive model for efficient streaming. It supports Text-to-Video, Image-to-Video, Video-to-Video, Editing Propagation, Reference-guided Video Editing, and Camera Pose Change, enabling flexible control over video generation, transformation, and editing within one system. To make the unified model practical for interactive use, we develop a two-stage distillation approach that combines Velocity Moment Matching (VMM) with autoregressive unrolling. VMM matches conditional velocity moments at student-reached intermediate states to preserve generation quality and motion, while unrolling exposes the student to its own autoregressive predictions to improve temporal stability. Together, they alleviate common challenges in few-step autoregressive video generation, including over-saturation, degraded motion, temporal instability, and complex training. EditStream provides a practical and scalable solution that bridges high-quality diffusion-based video models with interactive creative workflows.

Interactive autoregressive video generation demands both low-latency rollouts and precise online control. Few-step distillation accelerates generation by reducing denoising steps, while online control imposes a causal constraint: frames and blocks should depend on history and controls available during generation. Existing video distribution matching distillation (DMD) pipelines, however, often supervise causal few-step students using bidirectional teachers that score complete clips. The score for a target can therefore depend on future frames and controls that were unavailable when the student generated it, misaligning teacher supervision with the student's causal information set. We introduce Context-Matched Distillation (CMD), a causal DMD framework that aligns teacher supervision with the information available when each target is generated. CMD replaces bidirectional full-clip scoring with a causal teacher that evaluates each target without access to future frames or controls. The same causal teacher initializes the few-step student, establishing a consistent causal formulation across teacher training, student distillation, and inference. Beyond aligning the temporal information boundary, Prefix Scoring matches supervision to the student's realized rollout context by evaluating each target under the cached student-generated prefix that produced it. Prefix Corruption further stabilizes training by perturbing unreliable prefixes produced early in training while preserving this target-context alignment. With a simple causal formulation, CMD naturally extends to frame-wise and chunk-wise generation, long video distillation, and camera-conditioned distillation. Experiments demonstrate state-of-the-art aggregate performance among autoregressive methods on both short- and long-video benchmarks, together with substantially improved adherence to time-varying camera controls.

Diffusion distillation has dramatically accelerated class-conditional image synthesis, but its applicability to open-ended text-to-image (T2I) generation is still unclear. We present the first systematic study that adapts and compares state-of-the-art distillation techniques on a strong T2I teacher model, FLUX.1-lite. By casting existing methods into a unified framework, we identify the key obstacles that arise when moving from discrete class labels to free-form language prompts. Beyond a thorough methodological analysis, we offer practical guidelines on input scaling, network architecture, and hyperparameters, accompanied by an open-source implementation and pretrained student models. Our findings establish a solid foundation for deploying fast, high-fidelity, and resource-efficient diffusion generators in real-world T2I applications. Code is available on github.com/alibaba-damo-academy/T2I-Distill.

While large-scale text-to-image generative models have achieved unprecedented visual performance, their inherent reliance on multi-step iterative solvers incurs severe inference latency. Few-step distillation targeting the Classifier-Free Guidance (CFG) trajectory has emerged as the prevalent dual-dimensional compression paradigm. However, existing frameworks remain subjugated by a coarse-grained blind injection paradigm that perpetually enforces a globally static guidance strength while indiscriminately sampling the supervisor timestep. This state-agnostic design completely disregards the intrinsic nature of image generation as a dynamic evolutionary process characterized by progressive entropy reduction, which not only restricts the performance boundary of few-step compression but also precipitates severe CFG over-conditioning artifacts. To transcend these limitations, we re-examine the distillation procedure through the theoretical lens of Information Theory, formally modeling it as a dynamic mutual information game constrained by the Information Bottleneck (IB) principle. Specifically, we dismantle traditional blind assumptions via a dual-track adaptive framework. To determine the injection target, we propose an instance-aware selection mechanism that transmutes the intractable KL divergence constraint into a zero-overhead closed-form solution predicated on the local vector field norm. To regulate the injection strength, we introduce an entropy-aware schedule that dynamically decays alongside the SNR, applying maximal thrust for initial structural anchoring before smoothly reverting to the natural manifold to refine micro-details. Extensive empirical evaluations corroborate that our framework fundamentally eradicates over-conditioning artifacts, shattering the performance ceiling to achieve SOTA generative fidelity under extremely stringent 2-step configurations.

Recent diffusion and flow matching models have demonstrated strong capabilities in image generation and editing by progressively removing noise through iterative sampling. While this enables flexible inversion for semantic-preserving edits, few-step sampling regimes suffer from poor forward process approximation, leading to degraded editing quality. Existing few-step inversion methods often rely on pretrained generators and auxiliary modules, limiting scalability and generalization across different architectures. To address these limitations, we propose BiFM (Bidirectional Flow Matching), a unified framework that jointly learns generation and inversion within a single model. BiFM directly estimates average velocity fields in both ``image to noise" and ``noise to image" directions, constrained by a shared instantaneous velocity field derived from either predefined schedules or pretrained multi-step diffusion models. Additionally, BiFM introduces a novel training strategy using continuous time-interval supervision, stabilized by a bidirectional consistency objective and a lightweight time-interval embedding. This bidirectional formulation also enables one-step inversion and can integrate seamlessly into popular diffusion and flow matching backbones. Across diverse image editing and generation tasks, BiFM consistently outperforms existing few-step approaches, achieving superior performance and editability.

Autoregressive language models (ARMs) deliver strong likelihoods, but are inherently serial: they generate one token per forward pass, which limits throughput and inflates latency for long sequences. Diffusion Language Models (DLMs) parallelize across positions and thus appear promising for language generation, yet standard discrete diffusion typically needs hundreds to thousands of model evaluations to reach high quality, trading serial depth for iterative breadth. We introduce FS-DFM, Few-Step Discrete Flow-Matching. A discrete flow-matching model designed for speed without sacrificing quality. The core idea is simple: make the number of sampling steps an explicit parameter and train the model to be consistent across step budgets, so one big move lands where many small moves would. We pair this with a reliable update rule that moves probability in the right direction without overshooting, and with strong teacher guidance distilled from long-run trajectories. Together, these choices make few-step sampling stable, accurate, and easy to control. On language modeling benchmarks, FS-DFM with 8 sampling steps achieves perplexity parity with a 1,024-step discrete-flow baseline for generating 1,024 tokens using a similar-size model, delivering up to 128 times faster sampling and corresponding latency/throughput gains.

Flow matching has emerged as a promising framework for training generative models, demonstrating impressive empirical performance while offering relative ease of training compared to diffusion-based models. However, this method still requires numerous function evaluations in the sampling process. To address these limitations, we introduce a self-corrected flow distillation method that effectively integrates consistency models and adversarial training within the flow-matching framework. This work is a pioneer in achieving consistent generation quality in both few-step and one-step sampling. Our extensive experiments validate the effectiveness of our method, yielding superior results both quantitatively and qualitatively on CelebA-HQ and zero-shot benchmarks on the COCO dataset. Our implementation is released at https://github.com/VinAIResearch/SCFlow

Diffusion models (DMs) produce high-quality images, yet their sampling remains costly when adapted to new domains. Distilled DMs are faster but typically remain confined within their teacher's domain. Thus, fast and high-quality generation for novel domains relies on two-stage pipelines: Adapt-then-Distill or Distill-then-Adapt. However, both add design complexity and often degrade quality or diversity. We introduce Uni-DAD, a single-stage pipeline that unifies DM distillation and adaptation. It couples two training signals: (i) a dual-domain distribution-matching distillation (DMD) objective that guides the student toward the distributions of the source teacher and a target teacher, and (ii) a multi-head generative adversarial network (GAN) loss that encourages target realism across multiple feature scales. The source domain distillation preserves diverse source knowledge, while the multi-head GAN stabilizes training and reduces overfitting, especially in few-shot regimes. The inclusion of a target teacher facilitates adaptation to more structurally distant domains. We evaluate Uni-DAD on two comprehensive benchmarks for few-shot image generation (FSIG) and subject-driven personalization (SDP) using diffusion backbones. It delivers better or comparable quality to state-of-the-art (SoTA) adaptation methods even with less than 4 sampling steps, and often surpasses two-stage pipelines in quality and diversity. Code: https://github.com/yaramohamadi/uni-DAD.

Recent diffusion-based models achieve photorealism in image inpainting but require many sampling steps, limiting practical use. Few-step text-to-image models offer faster generation, but naively applying them to inpainting yields poor harmonization and artifacts between the background and inpainted region. We trace this cause to random Gaussian noise initialization, which under low function evaluations causes semantic misalignment and reduced fidelity. To overcome this, we propose InverFill, a one-step inversion method tailored for inpainting that injects semantic information from the input masked image into the initial noise, enabling high-fidelity few-step inpainting. Instead of training inpainting models, InverFill leverages few-step text-to-image models in a blended sampling pipeline with semantically aligned noise as input, significantly improving vanilla blended sampling and even matching specialized inpainting models at low NFEs. Moreover, InverFill does not require real-image supervision and only adds minimal inference overhead. Extensive experiments show that InverFill consistently boosts baseline few-step models, improving image quality and text coherence without costly retraining or heavy iterative optimization.

Text-to-multiview (T2MV) generation, which produces coherent multiview images from a single text prompt, remains computationally intensive, while accelerated T2MV methods using few-step diffusion models often sacrifice image fidelity and view consistency. To address this, we propose a novel reinforcement learning (RL) finetuning framework tailored for few-step T2MV diffusion models to jointly optimize per-view fidelity and cross-view consistency. Specifically, we first reformulate T2MV denoising across all views as a single unified Markov decision process, enabling multiview-aware policy optimization driven by a joint-view reward objective. Next, we introduce ZMV-Sampling, a test-time T2MV sampling technique that adds an inversion-denoising pass to reinforce both viewpoint and text conditioning, resulting in improved T2MV generation at the cost of inference time. To internalize its performance gains into the base sampling policy, we develop MV-ZigAL, a novel policy optimization strategy that uses reward advantages of ZMV-Sampling over standard sampling as learning signals for policy updates. Finally, noting that the joint-view reward objective under-optimizes per-view fidelity but naively optimizing single-view metrics neglects cross-view alignment, we reframe RL finetuning for T2MV diffusion models as a constrained optimization problem that maximizes per-view fidelity subject to an explicit joint-view constraint, thereby enabling more efficient and balanced policy updates. By integrating this constrained optimization paradigm with MV-ZigAL, we establish our complete RL finetuning framework, referred to as MVC-ZigAL, which effectively refines the few-step T2MV diffusion baseline in both fidelity and consistency while preserving its few-step efficiency.

Diffusion models have achieved significant visual generation quality. However, their significant computational and memory costs pose challenge for their application on resource-constrained mobile devices or even desktop GPUs. Recent few-step diffusion models reduces the inference time by reducing the denoising steps. However, their memory consumptions are still excessive. The Post Training Quantization (PTQ) replaces high bit-width FP representation with low-bit integer values (INT4/8) , which is an effective and efficient technique to reduce the memory cost. However, when applying to few-step diffusion models, existing quantization methods face challenges in preserving both the image quality and text alignment. To address this issue, we propose an mixed-precision quantization framework - MixDQ. Firstly, We design specialized BOS-aware quantization method for highly sensitive text embedding quantization. Then, we conduct metric-decoupled sensitivity analysis to measure the sensitivity of each layer. Finally, we develop an integer-programming-based method to conduct bit-width allocation. While existing quantization methods fall short at W8A8, MixDQ could achieve W8A8 without performance loss, and W4A8 with negligible visual degradation. Compared with FP16, we achieve 3-4x reduction in model size and memory cost, and 1.45x latency speedup.

Diffusion large language models (DLLMs) have the potential to enable fast text generation by decoding multiple tokens in parallel. However, in practice, their inference efficiency is constrained by the need for many refinement steps, while aggressively reducing the number of steps leads to a substantial degradation in generation quality. To alleviate this, we propose a trajectory self-distillation framework that improves few-step decoding by distilling the model's own generative trajectories. We incorporate Direct Discriminative Optimization (DDO), a reverse-KL objective that promotes mode-seeking distillation and encourages the student to concentrate on high-probability teacher modes. Across benchmarks, our approach consistently outperforms strong few-step baselines and standard training under tight step budgets. Although full-step decoding remains superior, we substantially narrow the gap, establishing a strong foundation towards practical few-step DLLMs. The source code is available at https://github.com/Tyrion58/T3D.

While few-step generative models have enabled powerful image and video generation at significantly lower cost, generic reinforcement learning (RL) paradigms for few-step models remain an unsolved problem. Existing RL approaches for few-step diffusion models strongly rely on back-propagating through differentiable reward models, thereby excluding the majority of important real-world reward signals, e.g., non-differentiable rewards such as humans' binary likeness, object counts, etc. To properly incorporate non-differentiable rewards to improve few-step generative models, we introduce TDM-R1, a novel reinforcement learning paradigm built upon a leading few-step model, Trajectory Distribution Matching (TDM). TDM-R1 decouples the learning process into surrogate reward learning and generator learning. Furthermore, we developed practical methods to obtain per-step reward signals along the deterministic generation trajectory of TDM, resulting in a unified RL post-training method that significantly improves few-step models' ability with generic rewards. We conduct extensive experiments ranging from text-rendering, visual quality, and preference alignment. All results demonstrate that TDM-R1 is a powerful reinforcement learning paradigm for few-step text-to-image models, achieving state-of-the-art reinforcement learning performances on both in-domain and out-of-domain metrics. Furthermore, TDM-R1 also scales effectively to the recent strong Z-Image model, consistently outperforming both its 100-NFE and few-step variants with only 4 NFEs. Project page: https://github.com/Luo-Yihong/TDM-R1

Diffusion and flow matching models generate high-fidelity data by simulating paths defined by Ordinary or Stochastic Differential Equations (ODEs/SDEs), starting from a tractable prior distribution. The probability flow ODE formulation enables the use of advanced numerical solvers to accelerate sampling. Orthogonal yet vital to solver design is the discretization strategy. While early approaches employed handcrafted heuristics and recent methods adopt optimization-based techniques, most existing strategies enforce a globally shared timestep schedule across all samples. This uniform treatment fails to account for instance-specific complexity in the generative process, potentially limiting performance. Motivated by controlled experiments on synthetic data, which reveals the suboptimality of global schedules under instance-specific dynamics, we propose an instance-aware discretization framework. Our method learns to adapt timestep allocations based on input-dependent priors, extending gradient-based discretization search to the conditional generative setting. Empirical results across diverse settings, including synthetic data, pixel-space diffusion, latent-space images and video flow matching models, demonstrate that our method consistently improves generation quality with marginal tuning cost compared to training and negligible inference overhead.

Video Diffusion Transformer (DiT) models are a dominant approach for high-quality video generation but suffer from high inference cost due to iterative denoising. Existing caching approaches primarily exploit similarity within the diffusion process of a single request to skip redundant denoising steps. In this paper, we introduce Chorus, a caching approach that leverages similarity across requests to accelerate video diffusion model serving. Chorus achieves up to 45\% speedup on industrial 4-step distilled models, where prior intra-request caching approaches are ineffective. Particularly, Chorus employs a three-stage caching strategy along the denoising process. Stage 1 performs full reuse of latent features from similar requests. Stage 2 exploits inter-request caching in specific latent regions during intermediate denoising steps. This stage is combined with Token-Guided Attention Amplification to improve semantic alignment between the generated video and the conditional prompts, thereby extending the applicability of full reuse to later denoising steps.

Diffusion models have achieved remarkable generation quality, but they suffer from significant inference cost due to their reliance on multiple sequential denoising steps, motivating recent efforts to distill this inference process into a few-step regime. However, existing distillation methods typically approximate the teacher trajectory by using linear shortcuts, which makes it difficult to match its constantly changing tangent directions as velocities evolve across timesteps, thereby leading to quality degradation. To address this limitation, we propose ArcFlow, a few-step distillation framework that explicitly employs non-linear flow trajectories to approximate pre-trained teacher trajectories. Concretely, ArcFlow parameterizes the velocity field underlying the inference trajectory as a mixture of continuous momentum processes. This enables ArcFlow to capture velocity evolution and extrapolate coherent velocities to form a continuous non-linear trajectory within each denoising step. Importantly, this parameterization admits an analytical integration of this non-linear trajectory, which circumvents numerical discretization errors and results in high-precision approximation of the teacher trajectory. To train this parameterization into a few-step generator, we implement ArcFlow via trajectory distillation on pre-trained teacher models using lightweight adapters. This strategy ensures fast, stable convergence while preserving generative diversity and quality. Built on large-scale models (Qwen-Image-20B and FLUX.1-dev), ArcFlow only fine-tunes on less than 5% of original parameters and achieves a 40x speedup with 2 NFEs over the original multi-step teachers without significant quality degradation. Experiments on benchmarks show the effectiveness of ArcFlow both qualitatively and quantitatively.