Daily Papers

Vision-Language-Action (VLA) models commonly generate robot actions token by token through Large Language Model (LLM) decoders, causing inference latency to grow with action sequence length and limiting closed-loop control frequency. We present Goal-Conditioned Vision-Predictor-Action (VPA), which replaces autoregressive decoders with a lightweight latent control loop. A shared vision encoder and a frozen text encoder embed observations, goal images, and instructions; a neuro-symbolic selector chooses a discrete skill; a Joint-Embedding Predictive Architecture (JEPA) predictor forecasts the next latent state; and a flow-matching solver generates an entire action chunk in a few integration steps, so that sequential network evaluations per decision step do not depend on the action horizon. We analyze inference complexity, regularization against representation collapse, and conditions under which latent sub-goal thresholding limits error accumulation across task phases. As an initial proof of concept, we evaluated VPA on the LIBERO-10 suite. The trainable model has under 20M parameters (checkpoint under 75 MB, excluding a frozen 63.4M-parameter CLIP text encoder); a decision step of a single-camera reference configuration takes 10-14 ms on an Apple M4; and trained only on LIBERO-10 demonstrations in under three hours on a single GPU, a two-camera policy succeeded in 40.0% of 200 evaluation episodes. These preliminary results from a single training run suggest the approach is workable. Code and weights are available at https://github.com/ylee-sling/Vision-Predictor-Action and https://huggingface.co/ylee-sling/vpa-libero10, and archived at https://doi.org/10.5281/zenodo.22960920.

Post-training of flow matching models-aligning the output distribution with a high-quality target-is mathematically equivalent to imitation learning. While Supervised Fine-Tuning mimics expert demonstrations effectively, it cannot correct policy drift in unseen states. Preference optimization methods address this but require costly preference pairs or reward modeling. We propose Flow Matching Adversarial Imitation Learning (FAIL), which minimizes policy-expert divergence through adversarial training without explicit rewards or pairwise comparisons. We derive two algorithms: FAIL-PD exploits differentiable ODE solvers for low-variance pathwise gradients, while FAIL-PG provides a black-box alternative for discrete or computationally constrained settings. Fine-tuning FLUX with only 13,000 demonstrations from Nano Banana pro, FAIL achieves competitive performance on prompt following and aesthetic benchmarks. Furthermore, the framework generalizes effectively to discrete image and video generation, and functions as a robust regularizer to mitigate reward hacking in reward-based optimization. Code and data are available at https://github.com/HansPolo113/FAIL.

Neural processes (NPs) are a class of models that learn stochastic processes directly from data and can be used for inference, sampling and conditional sampling. We introduce a new NP model based on flow matching, a generative modeling paradigm that has demonstrated strong performance on various data modalities. Following the NP training framework, the model provides amortized predictions of conditional distributions over any arbitrary points in the data. Compared to previous NP models, our model is simple to implement and can be used to sample from conditional distributions using an ODE solver, without requiring auxiliary conditioning methods. In addition, the model provides a controllable tradeoff between accuracy and running time via the number of steps in the ODE solver. We show that our model outperforms previous state-of-the-art neural process methods on various benchmarks including synthetic 1D Gaussian processes data, 2D images, and real-world weather data.

Flow matching is a recent framework to train generative models that exhibits impressive empirical performance while being relatively easier to train compared with diffusion-based models. Despite its advantageous properties, prior methods still face the challenges of expensive computing and a large number of function evaluations of off-the-shelf solvers in the pixel space. Furthermore, although latent-based generative methods have shown great success in recent years, this particular model type remains underexplored in this area. In this work, we propose to apply flow matching in the latent spaces of pretrained autoencoders, which offers improved computational efficiency and scalability for high-resolution image synthesis. This enables flow-matching training on constrained computational resources while maintaining their quality and flexibility. Additionally, our work stands as a pioneering contribution in the integration of various conditions into flow matching for conditional generation tasks, including label-conditioned image generation, image inpainting, and semantic-to-image generation. Through extensive experiments, our approach demonstrates its effectiveness in both quantitative and qualitative results on various datasets, such as CelebA-HQ, FFHQ, LSUN Church & Bedroom, and ImageNet. We also provide a theoretical control of the Wasserstein-2 distance between the reconstructed latent flow distribution and true data distribution, showing it is upper-bounded by the latent flow matching objective. Our code will be available at https://github.com/VinAIResearch/LFM.git.

We introduce a new paradigm for generative modeling built on Continuous Normalizing Flows (CNFs), allowing us to train CNFs at unprecedented scale. Specifically, we present the notion of Flow Matching (FM), a simulation-free approach for training CNFs based on regressing vector fields of fixed conditional probability paths. Flow Matching is compatible with a general family of Gaussian probability paths for transforming between noise and data samples -- which subsumes existing diffusion paths as specific instances. Interestingly, we find that employing FM with diffusion paths results in a more robust and stable alternative for training diffusion models. Furthermore, Flow Matching opens the door to training CNFs with other, non-diffusion probability paths. An instance of particular interest is using Optimal Transport (OT) displacement interpolation to define the conditional probability paths. These paths are more efficient than diffusion paths, provide faster training and sampling, and result in better generalization. Training CNFs using Flow Matching on ImageNet leads to consistently better performance than alternative diffusion-based methods in terms of both likelihood and sample quality, and allows fast and reliable sample generation using off-the-shelf numerical ODE solvers.

The DC Optimal Power Flow (DC-OPF) problem is fundamental to power system operations, requiring rapid solutions for real-time grid management. While traditional optimization solvers provide optimal solutions, their computational cost becomes prohibitive for large-scale systems requiring frequent recalculations. Machine learning approaches offer promise for acceleration but often struggle with constraint satisfaction and cost optimality. We present a novel two-stage learning framework that combines physics-informed Graph Neural Networks (GNNs) with Continuous Flow Matching (CFM) for solving DC-OPF problems. Our approach embeds fundamental physical principles--including economic dispatch optimality conditions, Kirchhoff's laws, and Karush-Kuhn-Tucker (KKT) complementarity conditions--directly into the training objectives. The first stage trains a GNN to produce feasible initial solutions by learning from physics-informed losses that encode power system constraints. The second stage employs CFM, a simulation-free continuous normalizing flow technique, to refine these solutions toward optimality through learned vector field regression. Evaluated on the IEEE 30-bus system across five load scenarios ranging from 70\% to 130\% nominal load, our method achieves near-optimal solutions with cost gaps below 0.1\% for nominal loads and below 3\% for extreme conditions, while maintaining 100\% feasibility. Our framework bridges the gap between fast but approximate neural network predictions and optimal but slow numerical solvers, offering a practical solution for modern power systems with high renewable penetration requiring frequent dispatch updates.

We introduce CaLMFlow (Causal Language Models for Flow Matching), a novel framework that casts flow matching as a Volterra integral equation (VIE), leveraging the power of large language models (LLMs) for continuous data generation. CaLMFlow enables the direct application of LLMs to learn complex flows by formulating flow matching as a sequence modeling task, bridging discrete language modeling and continuous generative modeling. Our method implements tokenization across space and time, thereby solving a VIE over these domains. This approach enables efficient handling of high-dimensional data and outperforms ODE solver-dependent methods like conditional flow matching (CFM). We demonstrate CaLMFlow's effectiveness on synthetic and real-world data, including single-cell perturbation response prediction, showcasing its ability to incorporate textual context and generalize to unseen conditions. Our results highlight LLM-driven flow matching as a promising paradigm in generative modeling, offering improved scalability, flexibility, and context-awareness.

This paper introduces FlowMAC, a novel neural audio codec for high-quality general audio compression at low bit rates based on conditional flow matching (CFM). FlowMAC jointly learns a mel spectrogram encoder, quantizer and decoder. At inference time the decoder integrates a continuous normalizing flow via an ODE solver to generate a high-quality mel spectrogram. This is the first time that a CFM-based approach is applied to general audio coding, enabling a scalable, simple and memory efficient training. Our subjective evaluations show that FlowMAC at 3 kbps achieves similar quality as state-of-the-art GAN-based and DDPM-based neural audio codecs at double the bit rate. Moreover, FlowMAC offers a tunable inference pipeline, which permits to trade off complexity and quality. This enables real-time coding on CPU, while maintaining high perceptual quality.

Video imaging is often affected by complex degradations such as blur, noise, and compression artifacts. Traditional restoration methods follow a "single-task single-model" paradigm, resulting in poor generalization and high computational cost, limiting their applicability in real-world scenarios with diverse degradation types. We propose UniFlowRestore, a general video restoration framework that models restoration as a time-continuous evolution under a prompt-guided and physics-informed vector field. A physics-aware backbone PhysicsUNet encodes degradation priors as potential energy, while PromptGenerator produces task-relevant prompts as momentum. These components define a Hamiltonian system whose vector field integrates inertial dynamics, decaying physical gradients, and prompt-based guidance. The system is optimized via a fixed-step ODE solver to achieve efficient and unified restoration across tasks. Experiments show that UniFlowRestore delivers stateof-the-art performance with strong generalization and efficiency. Quantitative results demonstrate that UniFlowRestore achieves state-of-the-art performance, attaining the highest PSNR (33.89 dB) and SSIM (0.97) on the video denoising task, while maintaining top or second-best scores across all evaluated tasks.

Diffusion models approximate the denoising distribution as a Gaussian and predict its mean, whereas flow matching models reparameterize the Gaussian mean as flow velocity. However, they underperform in few-step sampling due to discretization error and tend to produce over-saturated colors under classifier-free guidance (CFG). To address these limitations, we propose a novel Gaussian mixture flow matching (GMFlow) model: instead of predicting the mean, GMFlow predicts dynamic Gaussian mixture (GM) parameters to capture a multi-modal flow velocity distribution, which can be learned with a KL divergence loss. We demonstrate that GMFlow generalizes previous diffusion and flow matching models where a single Gaussian is learned with an L_2 denoising loss. For inference, we derive GM-SDE/ODE solvers that leverage analytic denoising distributions and velocity fields for precise few-step sampling. Furthermore, we introduce a novel probabilistic guidance scheme that mitigates the over-saturation issues of CFG and improves image generation quality. Extensive experiments demonstrate that GMFlow consistently outperforms flow matching baselines in generation quality, achieving a Precision of 0.942 with only 6 sampling steps on ImageNet 256times256.

Generative models have emerged as a powerful paradigm for solving physics systems and modeling complex spatiotemporal dynamics. However, achieving high physical accuracy without incurring high computational cost remains a fundamental challenge, as existing approaches face a critical speed-fidelity trade-off. In this work, we introduce Recursive Flow Matching (RecFM), a generative framework for forecasting complex spatiotemporal dynamics. RecFM enforces self-consistency to align trajectories across discretization scales, reducing discretization errors and improving performance across metrics for physics-based tasks. To our knowledge, this is the first method to achieve high-fidelity one- and few-step (2-4 step) dynamic generation for scientific systems with performance comparable to state-of-the-art multi-step solvers. Across challenging scientific benchmarks, RecFM achieves up to a 20times speedup over leading diffusion-based emulators while improving predictive accuracy. Furthermore, RecFM reduces mean squared error by over 15% compared to vanilla flow matching, offering a scalable and efficient solution for real-time scientific emulation.

Autoregressive Transformers dominate high-quality mesh generation by producing artist-worthy topologies, yet their inherent sequential decoding induces substantial computational overhead, falling orders of magnitude slower than parallel generative models. On the other hand, while continuous diffusion and flow-matching methods support efficient parallel synthesis across a variety of domains, they cannot be directly applied to meshes: mesh connectivity is inherently discrete and incompatible with standard continuous noise injection and denoising operations. To resolve this fundamental incompatibility, we introduce a compact topology embedder that projects discrete mesh vertex positions and normals into continuous per-vertex embeddings, where the original discrete adjacency information can be faithfully recovered via spacetime distance thresholding. After pretraining and freezing this embedder, any raw mesh can be fully converted into a continuous per-vertex state space unifying position, normal, and implicit topological attributes. Built upon this novel continuous mesh representation, we present PolyFlow, a Transformer-based flow-matching framework that achieves fully parallel vertex state denoising conditioned on extracted point-cloud features. During inference, our model completes generation rapidly via an ODE solver, and supports explicit, precise control over output mesh resolution by directly specifying the target vertex count. Extensive evaluations on the Toys4K benchmark demonstrate that PolyFlow surpasses state-of-the-art autoregressive baselines in both Chamfer Distance and Hausdorff Distance.

Detector simulations are an exciting application of modern generative networks. Their sparse high-dimensional data combined with the required precision poses a serious challenge. We show how combining Conditional Flow Matching with transformer elements allows us to simulate the detector phase space reliably. Namely, we use an autoregressive transformer to simulate the energy of each layer, and a vision transformer for the high-dimensional voxel distributions. We show how dimension reduction via latent diffusion allows us to train more efficiently and how diffusion networks can be evaluated faster with bespoke solvers. We showcase our framework, CaloDREAM, on datasets 2 and 3 of the CaloChallenge.

Metric-induced discrete flow matching (MI-DFM) exploits token-latent geometry for discrete generation, but its practical use is limited by two issues: heuristic schedulers requiring hyperparameter search, and finite-step path-tracking error from its first-order continuous-time Markov chain (CTMC) solver. We address both issues. First, we derive a kinetic-optimal scheduler for prescribed scalar-parameterized probability paths, and instantiate it for MI-DFM as a training-free numerical schedule that traverses the path at constant Fisher-Rao speed. Second, we introduce a finite-step moment correction that adjusts the jump probability while preserving the CTMC jump destination distribution. We validate the resulting method, GibbsTTS, on codec-based zero-shot text-to-speech (TTS). Under controlled comparisons with a unified architecture and large-scale dataset, GibbsTTS achieves the best objective naturalness and is preferred in subjective evaluations over masked discrete generative baselines. Additionally, in comparison with the evaluated state-of-the-art TTS systems, GibbsTTS shows strong speaker similarity, achieving the highest similarity on three of four test sets and ranking second on the fourth. Project page: https://ydqmkkx.github.io/GibbsTTSProject

Reconstructing the early universe from the evolved present-day universe is a challenging and computationally demanding problem in modern astrophysics. We devise a novel generative framework, Cosmo3DFlow, designed to address dimensionality and sparsity, the critical bottlenecks inherent in current state-of-the-art methods for cosmological inference. By integrating 3D Discrete Wavelet Transform (DWT) with flow matching, we effectively represent high-dimensional cosmological structures. The Wavelet Transform addresses the ``void problem'' by translating spatial emptiness into spectral sparsity. It decouples high-frequency details from low-frequency structures, and wavelet-space velocity fields facilitate stable ordinary differential equation (ODE) solvers with large step sizes. Using large-scale cosmological N-body simulations at 128^3 resolution, we achieve up to 46times faster sampling than diffusion models. Our results enable initial conditions to be sampled in seconds, compared to minutes for previous methods.

Classifier-Free Guidance (CFG) is a widely adopted technique in diffusion/flow models to improve image fidelity and controllability. In this work, we first analytically study the effect of CFG on flow matching models trained on Gaussian mixtures where the ground-truth flow can be derived. We observe that in the early stages of training, when the flow estimation is inaccurate, CFG directs samples toward incorrect trajectories. Building on this observation, we propose CFG-Zero*, an improved CFG with two contributions: (a) optimized scale, where a scalar is optimized to correct for the inaccuracies in the estimated velocity, hence the * in the name; and (b) zero-init, which involves zeroing out the first few steps of the ODE solver. Experiments on both text-to-image (Lumina-Next, Stable Diffusion 3, and Flux) and text-to-video (Wan-2.1) generation demonstrate that CFG-Zero* consistently outperforms CFG, highlighting its effectiveness in guiding Flow Matching models. (Code is available at github.com/WeichenFan/CFG-Zero-star)

Continuous-time generative models, such as diffusion models, flow matching, and rectified flow, learn time-dependent vector fields but are typically trained with objectives that treat timesteps independently, leading to high estimator variance and inefficient sampling. Prior approaches mitigate this via explicit smoothness penalties, trajectory regularization, or modified probability paths and solvers. We introduce Temporal Pair Consistency (TPC), a lightweight variance-reduction principle that couples velocity predictions at paired timesteps along the same probability path, operating entirely at the estimator level without modifying the model architecture, probability path, or solver. We provide a theoretical analysis showing that TPC induces a quadratic, trajectory-coupled regularization that provably reduces gradient variance while preserving the underlying flow-matching objective. Instantiated within flow matching, TPC improves sample quality and efficiency across CIFAR-10 and ImageNet at multiple resolutions, achieving lower FID at identical or lower computational cost than prior methods, and extends seamlessly to modern SOTA-style pipelines with noise-augmented training, score-based denoising, and rectified flow.

Diffusion-based generative models have greatly impacted the speech processing field in recent years, exhibiting high speech naturalness and spawning a new research direction. Their application in real-time communication is, however, still lagging behind due to their computation-heavy nature involving multiple calls of large DNNs. Here, we present Stream.FM, a frame-causal flow-based generative model with an algorithmic latency of 32 milliseconds (ms) and a total latency of 48 ms, paving the way for generative speech processing in real-time communication. We propose a buffered streaming inference scheme and an optimized DNN architecture, show how learned few-step numerical solvers can boost output quality at a fixed compute budget, explore model weight compression to find favorable points along a compute/quality tradeoff, and contribute a model variant with 24 ms total latency for the speech enhancement task. Our work looks beyond theoretical latencies, showing that high-quality streaming generative speech processing can be realized on consumer GPUs available today. Stream.FM can solve a variety of speech processing tasks in a streaming fashion: speech enhancement, dereverberation, codec post-filtering, bandwidth extension, STFT phase retrieval, and Mel vocoding. As we verify through comprehensive evaluations and a MUSHRA listening test, Stream.FM establishes a state-of-the-art for generative streaming speech restoration, exhibits only a reasonable reduction in quality compared to a non-streaming variant, and outperforms our recent work (Diffusion Buffer) on generative streaming speech enhancement while operating at a lower latency.

High-quality speech coding at low bitrates is crucial for bandwidth-constrained applications, yet remains challenging due to the severe loss of quality-critical information in highly compressed representations. To overcome this challenge, we propose CFMDCTCodec, a low-bitrate neural speech codec that operates entirely in the modified discrete cosine transform (MDCT) domain. CFMDCTCodec integrates a lightweight encoder-quantizer-decoder-style MDCT-spectral codec with a noise-prior-aware, conditional-flow-matching (CFM)-based MDCT-spectral enhancer. Within this framework, the codec serves as a base module that compactly discretizes the MDCT spectrum extracted from speech and produces an initial coarse reconstruction, while the enhancer further restores fine-grained spectral details. The enhancer improves the decoded MDCT spectrum by integrating a conditional MDCT velocity-field filter with an ordinary differential equation (ODE) solver, under the guidance of an MDCT-derived magnitude-adaptive noise prior, aiming to emphasize perceptually significant high-energy regions while stabilizing low-energy and silent regions. Finally, the enhanced MDCT spectrum is reconstructed into the decoded speech using the inverse MDCT. When optimizing CFMDCTCodec, we adopt a unified non-adversarial training strategy that jointly combines reconstruction, quantization and CFM objectives. Both objective and subjective evaluations show that CFMDCTCodec outperforms competitive baselines in low-bitrate regimes, e.g., 0.65 kbps, while approaching the perceptual quality of large-scale codecs with significantly fewer parameters and computations.

Binaural rendering aims to synthesize binaural audio that mimics natural hearing based on a mono audio and the locations of the speaker and listener. Although many methods have been proposed to solve this problem, they struggle with rendering quality and streamable inference. Synthesizing high-quality binaural audio that is indistinguishable from real-world recordings requires precise modeling of binaural cues, room reverb, and ambient sounds. Additionally, real-world applications demand streaming inference. To address these challenges, we propose a flow matching based streaming binaural speech synthesis framework called BinauralFlow. We consider binaural rendering to be a generation problem rather than a regression problem and design a conditional flow matching model to render high-quality audio. Moreover, we design a causal U-Net architecture that estimates the current audio frame solely based on past information to tailor generative models for streaming inference. Finally, we introduce a continuous inference pipeline incorporating streaming STFT/ISTFT operations, a buffer bank, a midpoint solver, and an early skip schedule to improve rendering continuity and speed. Quantitative and qualitative evaluations demonstrate the superiority of our method over SOTA approaches. A perceptual study further reveals that our model is nearly indistinguishable from real-world recordings, with a 42% confusion rate.

Neural operator surrogates for time-dependent partial differential equations (PDEs) conventionally employ autoregressive prediction schemes, which accumulate error over long rollouts and require uniform temporal discretization. We introduce the Continuous Flow Operator (CFO), a framework that learns continuous-time PDE dynamics without the computational burden of standard continuous approaches, e.g., neural ODE. The key insight is repurposing flow matching to directly learn the right-hand side of PDEs without backpropagating through ODE solvers. CFO fits temporal splines to trajectory data, using finite-difference estimates of time derivatives at knots to construct probability paths whose velocities closely approximate the true PDE dynamics. A neural operator is then trained via flow matching to predict these analytic velocity fields. This approach is inherently time-resolution invariant: training accepts trajectories sampled on arbitrary, non-uniform time grids while inference queries solutions at any temporal resolution through ODE integration. Across four benchmarks (Lorenz, 1D Burgers, 2D diffusion-reaction, 2D shallow water), CFO demonstrates superior long-horizon stability and remarkable data efficiency. CFO trained on only 25% of irregularly subsampled time points outperforms autoregressive baselines trained on complete data, with relative error reductions up to 87%. Despite requiring numerical integration at inference, CFO achieves competitive efficiency, outperforming autoregressive baselines using only 50% of their function evaluations, while uniquely enabling reverse-time inference and arbitrary temporal querying.

Audio is an essential part of our life, but creating it often requires expertise and is time-consuming. Research communities have made great progress over the past year advancing the performance of large scale audio generative models for a single modality (speech, sound, or music) through adopting more powerful generative models and scaling data. However, these models lack controllability in several aspects: speech generation models cannot synthesize novel styles based on text description and are limited on domain coverage such as outdoor environments; sound generation models only provide coarse-grained control based on descriptions like "a person speaking" and would only generate mumbling human voices. This paper presents Audiobox, a unified model based on flow-matching that is capable of generating various audio modalities. We design description-based and example-based prompting to enhance controllability and unify speech and sound generation paradigms. We allow transcript, vocal, and other audio styles to be controlled independently when generating speech. To improve model generalization with limited labels, we adapt a self-supervised infilling objective to pre-train on large quantities of unlabeled audio. Audiobox sets new benchmarks on speech and sound generation (0.745 similarity on Librispeech for zero-shot TTS; 0.77 FAD on AudioCaps for text-to-sound) and unlocks new methods for generating audio with novel vocal and acoustic styles. We further integrate Bespoke Solvers, which speeds up generation by over 25 times compared to the default ODE solver for flow-matching, without loss of performance on several tasks. Our demo is available at https://audiobox.metademolab.com/

Vision-Language-Action (VLA) policies are typically shipped as Python/PyTorch stacks that assume a workstation-class GPU, a mismatch for the hardware on which robots actually run. We present vla.cpp, a portable C++ inference runtime built on llama.cpp. To our knowledge, it is the first ggml-class engine to natively serve the flow-matching and diffusion VLA inference pattern, in which a cached vision-language prefix is consumed by a cross-attending action expert integrated over several solver steps. A single runtime serves seven architectures spanning five backbone and four action-head families behind one request/response protocol, with each model packaged as a self-contained bundle. On LIBERO-Object, the engine matches a state-of-the-art checkpoint to within one episode out of 200, and runs BitVLA at 100% success in 1.3 GiB of memory. The same bundle runs unchanged across three hardware tiers, from a consumer GPU down to an 8 GB embedded module. A cross-hardware roofline analysis shows that batch-1 VLA inference is compute-bound, so utilization rather than bandwidth is the deployment lever; an IMMA ladder GEMM derived from this analysis cuts BitVLA per-step latency by 4.5x. We then frame an on-robot stress test on an ALOHA arm that isolates the latency constraint under which a learned VLA must replan against a moving target on the hardware it was trained for. Code, demo videos, and the reproducible benchmark scaffold are available at https://fai-modelopt-tech.github.io/vla-cpp.github.io/.

Post-training quantization (PTQ) is a practical path to deploy large diffusion models, but quantization noise can accumulate over the denoising trajectory and degrade generation quality. We propose Q-Drift, a principled sampler-side correction that treats quantization error as an implicit stochastic perturbation on each denoising step and derives a marginal-distribution-preserving drift adjustment. Q-Drift estimates a timestep-wise variance statistic from calibration, in practice requiring as few as 5 paired full-precision/quantized calibration runs. The resulting sampler correction is plug-and-play with common samplers, diffusion models, and PTQ methods, while incurring negligible overhead at inference. Across six diverse text-to-image models (spanning DiT and U-Net), three samplers (Euler, flow-matching, DPM-Solver++), and two PTQ methods (SVDQuant, MixDQ), Q-Drift improves FID over the corresponding quantized baseline in most settings, with up to 4.59 FID reduction on PixArt-Sigma (SVDQuant W3A4), while preserving CLIP scores.

Generative models have shown great potential in trajectory planning. Recent studies demonstrate that anchor-guided generative models are effective in modeling the uncertainty of driving behaviors and improving overall performance. However, these methods rely on discrete anchor vocabularies that must sufficiently cover the trajectory distribution during testing to ensure robustness, inducing an inherent trade-off between vocabulary size and model performance. To overcome this limitation, we propose MeanFuser, an end-to-end autonomous driving method that enhances both efficiency and robustness through three key designs. (1) We introduce Gaussian Mixture Noise (GMN) to guide generative sampling, enabling a continuous representation of the trajectory space and eliminating the dependency on discrete anchor vocabularies. (2) We adapt ``MeanFlow Identity" to end-to-end planning, which models the mean velocity field between GMN and trajectory distribution instead of the instantaneous velocity field used in vanilla flow matching methods, effectively eliminating numerical errors from ODE solvers and significantly accelerating inference. (3) We design a lightweight Adaptive Reconstruction Module (ARM) that enables the model to implicitly select from all sampled proposals or reconstruct a new trajectory when none is satisfactory via attention weights.Experiments on the NAVSIM closed-loop benchmark demonstrate that MeanFuser achieves outstanding performance without the supervision of the PDM Score and exceptional inference efficiency, offering a robust and efficient solution for end-to-end autonomous driving. Our code and model are available at https://github.com/wjl2244/MeanFuser.

Due to the resource-intensive nature of training vision-language models on expansive video data, a majority of studies have centered on adapting pre-trained image-language models to the video domain. Dominant pipelines propose to tackle the visual discrepancies with additional temporal learners while overlooking the substantial discrepancy for web-scaled descriptive narratives and concise action category names, leading to less distinct semantic space and potential performance limitations. In this work, we prioritize the refinement of text knowledge to facilitate generalizable video recognition. To address the limitations of the less distinct semantic space of category names, we prompt a large language model (LLM) to augment action class names into Spatio-Temporal Descriptors thus bridging the textual discrepancy and serving as a knowledge base for general recognition. Moreover, to assign the best descriptors with different video instances, we propose Optimal Descriptor Solver, forming the video recognition problem as solving the optimal matching flow across frame-level representations and descriptors. Comprehensive evaluations in zero-shot, few-shot, and fully supervised video recognition highlight the effectiveness of our approach. Our best model achieves a state-of-the-art zero-shot accuracy of 75.1% on Kinetics-600.

Generative models are increasingly used to solve scientific inverse problems, but existing evaluations still focus primarily on whether a method can produce a single plausible reconstruction. This is insufficient for ill-posed problems, where multiple solutions may be consistent with the same sparse or noisy observations. In these settings, a method can achieve strong pointwise accuracy while still failing to capture the true posterior through mode collapse, overconfident uncertainty, or averaging incompatible solutions. We introduce PosteriorBench, a benchmark for evaluating the distributional accuracy of generative inverse solvers. PosteriorBench evaluates four physics-based inverse problems: Darcy flow inversion, Poisson source recovery, carbon capture and storage, and light transport material inference. For each task, we construct high-fidelity reference posteriors using computationally heavy but established procedures such as rejection sampling and Markov chain Monte Carlo, enabling direct assessment of whether solvers recover the full set of solutions rather than the single best sample. We pair these references with a five-metric posterior evaluation suite: posterior-mean error, posterior-standard-deviation error, maximum mean discrepancy, sliced Wasserstein distance, and radially averaged power-spectrum error. These metrics assess pointwise accuracy, marginal uncertainty, distributional alignment, and global frequency fidelity. The benchmark spans sparse sensing, low-resolution observations, nonlinear forward models, varying noise levels, and multimodal priors, with a unified pipeline for distribution matching and uncertainty quantification. Our experiments reveal substantial distribution-matching gaps across current solvers, while showing that neural operators improve resolution robustness, and guidance weights and generation noise are key to posterior-variance calibration.

Learning to solve complex tasks with signal temporal logic (STL) specifications is crucial to many real-world applications. However, most previous works only consider fixed or parametrized STL specifications due to the lack of a diverse STL dataset and encoders to effectively extract temporal logic information for downstream tasks. In this paper, we propose TeLoGraF, Temporal Logic Graph-encoded Flow, which utilizes Graph Neural Networks (GNN) encoder and flow-matching to learn solutions for general STL specifications. We identify four commonly used STL templates and collect a total of 200K specifications with paired demonstrations. We conduct extensive experiments in five simulation environments ranging from simple dynamical models in the 2D space to high-dimensional 7DoF Franka Panda robot arm and Ant quadruped navigation. Results show that our method outperforms other baselines in the STL satisfaction rate. Compared to classical STL planning algorithms, our approach is 10-100X faster in inference and can work on any system dynamics. Besides, we show our graph-encoding method's capability to solve complex STLs and robustness to out-distribution STL specifications. Code is available at https://github.com/mengyuest/TeLoGraF

Flow matching (FM) is a general framework for defining probability paths via Ordinary Differential Equations (ODEs) to transform between noise and data samples. Recent approaches attempt to straighten these flow trajectories to generate high-quality samples with fewer function evaluations, typically through iterative rectification methods or optimal transport solutions. In this paper, we introduce Consistency Flow Matching (Consistency-FM), a novel FM method that explicitly enforces self-consistency in the velocity field. Consistency-FM directly defines straight flows starting from different times to the same endpoint, imposing constraints on their velocity values. Additionally, we propose a multi-segment training approach for Consistency-FM to enhance expressiveness, achieving a better trade-off between sampling quality and speed. Preliminary experiments demonstrate that our Consistency-FM significantly improves training efficiency by converging 4.4x faster than consistency models and 1.7x faster than rectified flow models while achieving better generation quality. Our code is available at: https://github.com/YangLing0818/consistency_flow_matching

Emotions are fundamental to the creation and perception of music performances. However, achieving human-like expression and emotion through machine learning models for performance rendering remains a challenging task. In this work, we present SyMuPe, a novel framework for developing and training affective and controllable symbolic piano performance models. Our flagship model, PianoFlow, uses conditional flow matching trained to solve diverse multi-mask performance inpainting tasks. By design, it supports both unconditional generation and infilling of music performance features. For training, we use a curated, cleaned dataset of 2,968 hours of aligned musical scores and expressive MIDI performances. For text and emotion control, we integrate a piano performance emotion classifier and tune PianoFlow with the emotion-weighted Flan-T5 text embeddings provided as conditional inputs. Objective and subjective evaluations against transformer-based baselines and existing models show that PianoFlow not only outperforms other approaches, but also achieves performance quality comparable to that of human-recorded and transcribed MIDI samples. For emotion control, we present and analyze samples generated under different text conditioning scenarios. The developed model can be integrated into interactive applications, contributing to the creation of more accessible and engaging music performance systems.

Flow matching is a powerful framework for generating high-quality samples in various applications, especially image synthesis. However, the intensive computational demands of these models, especially during the fine-tuning process and sampling processes, pose significant challenges for low-resource scenarios. This paper introduces Bellman Optimal Step-size Straightening (BOSS) technique for distilling flow-matching generative models: it aims specifically for a few-step efficient image sampling while adhering to a computational budget constraint. First, this technique involves a dynamic programming algorithm that optimizes the step sizes of the pretrained network. Then, it refines the velocity network to match the optimal step sizes, aiming to straighten the generation paths. Extensive experimental evaluations across image generation tasks demonstrate the efficacy of BOSS in terms of both resource utilization and image quality. Our results reveal that BOSS achieves substantial gains in efficiency while maintaining competitive sample quality, effectively bridging the gap between low-resource constraints and the demanding requirements of flow-matching generative models. Our paper also fortifies the responsible development of artificial intelligence, offering a more sustainable generative model that reduces computational costs and environmental footprints. Our code can be found at https://github.com/nguyenngocbaocmt02/BOSS.

Diffusion Flow Matching (DFM) has recently emerged as a versatile framework for generative modeling, yet its theoretical convergence properties remain only partially understood. In this work, we provide refined and novel convergence guarantees for Brownian motion based DFMs, focusing on the discretization error. Our analysis is conducted under the Kullback-Leibler (KL) divergence and the 2-Wasserstein distance. Under finite-moment conditions and a mild score integrability assumption, we derive KL convergence bounds with improved dimensional dependence compared to prior work, achieving, up to our knowledge, state-of-the-art scaling under minimal conditions. We further extend the analysis to the 2-Wasserstein distance: under an additional first-order score integrability assumption and a weak log-concavity condition, we obtain convergence guarantees with dimensional dependence consistent with the KL case.

Flow Matching (FM) is a recent framework for generative modeling that has achieved state-of-the-art performance across various domains, including image, video, audio, speech, and biological structures. This guide offers a comprehensive and self-contained review of FM, covering its mathematical foundations, design choices, and extensions. By also providing a PyTorch package featuring relevant examples (e.g., image and text generation), this work aims to serve as a resource for both novice and experienced researchers interested in understanding, applying and further developing FM.

In the field of Explainable AI (XAI), counterfactual (CF) explanations interpret a model's decision by suggesting the changes to the input that would lead to a more favourable outcome. To be useful in practice, such an explanation should change few features and change them as little as possible, properties known as sparsity and proximity. We observe that existing methods remain limited in this respect, especially for numerical features, whether they are model-agnostic and amortised, or gradient-based with full access to the model. In this paper, we propose FlowCF, a model-agnostic generative method that frames CF generation as sparse transport from the factual to the target class. We solve this transport with flow matching, which we extend to mixed feature types with a novel mixed flow operator, and exploit the resulting geometry to optimise for sparsity through a gating network that minimises the number of features the transport changes. Extensive experiments on six benchmark datasets demonstrate that FlowCF produces the best numerical sparsity and proximity, changing 29% of the numerical features where the best baseline changes 89%, at 70% smaller displacement, while remaining comparable on the other desiderata.

Deep generative models are used to solve partial differential equations and model distributions of physical system states, but ensuring that the generated samples satisfy the governing laws remains challenging. Projection-based flow-matching methods enforce physics by correcting the flow from an unconstrained noise distribution. These corrections shift the generated samples away from the distribution of target solutions, especially in high noise regions. To address this limitation, we propose Source Anchoring for Physical Consistency (SAPC), a Functional Flow Matching method that encodes the physical constraints into the source noise before generation begins. We evaluate SAPC on five systems governed by partial differential equations, covering six tasks with linear and non-linear dynamics, and compare results against five baselines and the unconstrained backbone. Anchoring the source reduces the need for large corrections that drive samples onto admissible but off-distribution states, and SAPC reproduces the target distributions most accurately on every evaluated task, while matching the constraint precision of the best projection-based baselines. Ablation experiments show that this gain arises from pairing source projection with a matched training objective that regresses toward the projected source. These results identify the source distribution as a key design choice for physically consistent generative modelling.

Flow matching has emerged as a compelling generative modeling approach that is widely used across domains. To generate data via a flow matching model, an ordinary differential equation (ODE) is numerically solved via forward integration of the modeled velocity field. To better capture the multi-modality that is inherent in typical velocity fields, hierarchical flow matching was recently introduced. It uses a hierarchy of ODEs that are numerically integrated when generating data. This hierarchy of ODEs captures the multi-modal velocity distribution just like vanilla flow matching is capable of modeling a multi-modal data distribution. While this hierarchy enables to model multi-modal velocity distributions, the complexity of the modeled distribution remains identical across levels of the hierarchy. In this paper, we study how to gradually adjust the complexity of the distributions across different levels of the hierarchy via mini-batch couplings. We show the benefits of mini-batch couplings in hierarchical rectified flow matching via compelling results on synthetic and imaging data. Code is available at https://riccizz.github.io/HRF_coupling.

Flow matching approaches to imaging inverse problems commonly incorporate measurements in two ways. Conditioning-based approaches supply measurement-derived information as a network input, often through concatenation, while inference-guided approaches combine an unconditional velocity field with a separate data-consistency update. In these common formulations, the forward model is not explicitly enforced within the learned conditional velocity field. We propose a principled parametrization of the measurement-conditional velocity field to solve inverse problems. Under linear interpolation, we express the conditional velocity v(x_t,t,y) in terms of the posterior mean E[x_1 | x_t,y], and characterize that mean as the unique minimizer of a variational objective whose data-consistency term is explicit. We further prove that the velocity field defines a probability flow from the source distribution to the measurement-conditioned posterior. Splitting the variational objective yields a conditional velocity parameterization with operator-dependent data-consistency updates, which we train end-to-end under the flow-matching objective, with no additional guidance at inference. Our method achieves state-of-the-art PSNR with 50times fewer function evaluations than the strongest flow baseline. Varying the sampling steps provides test-time control over the distortion-perception trade-off without retraining.

Recent work has explored visual reasoning through image generation, where models solve visual-reasoning problems by directly generating solution images. Intuitively, iterative samplers such as flow matching are well suited to this task, since each sampling step may resemble one reasoning step. However, in this work, from a circuit complexity perspective, we show that this intuition is misleading. We prove that as long as the model outputs satisfy certain mild regularity conditions, the trajectory of the vanilla flow-matching sampler can be simulated by a constant number of sequential rounds of parallel model evaluations. Consequently, additional sampling steps cannot increase the expressive power of a constant-depth backbone model under the standard complexity-theoretic model of transformers. We then reveal that self-conditioning, which conditions the model on the previous step's estimate of the final image, plays a previously unrecognized role in removing this bottleneck. Controlled experiments on diverse visual-reasoning tasks show that flow matching with self-conditioning achieves higher accuracy and greater reasoning depth than vanilla flow matching, and its performance improves with more sampling steps. Theoretically, we prove that with self-conditioning, a constant-depth backbone can achieve expressive power equivalent to that of space-bounded Turing machines. Our study suggests a design principle for future visual reasoning research: carry more information between sampling steps, so that additional steps translate into deeper reasoning.

Organic crystal structure prediction (CSP) is a requirement for computational modelling of organic solids, but traditionally costs several CPU-years per molecule. Generative models such as OXtal dramatically reduce this cost by sampling stable organic crystal structures directly. However, OXtal forgoes explicit lattice parametrization in favour of modelling large crops of the bulk material with expensive triangle layers, which can incur a computational cost of minutes per molecule. In this paper, we reduce this to seconds with Clari, a large-scale flow matching model that generates redundancy-free unit cells and replaces triangle layers with pure pair-bias attention. Clari requires only atom types and bonds as input and does not need an RDKit-sanitizable input molecule, which expands its applicability to challenging chemistries such as fullerenes, metal complexes, and atom clusters. We further ablate key design choices such as auxiliary losses, timestep distributions, noise priors, and self-conditioning. On OXtal's test sets, we surpass OXtal's solve rate while obtaining a speedup of 15-30times. Because Clari also models explicit hydrogens, it supports inference-time scaling via direct energy ranking, without any decoration or relaxation step. When generating 150 crystals and selecting the top-30 by energy, we further improve solve rate while maintaining a speedup of 5-8times. We also introduce the CSD Teaching Subset as a new test split of diverse and complex molecules for future benchmarking. Our contributions enable CSP within seconds, making large-scale virtual screening of organic solids practical. Code is available at https://github.com/aspuru-guzik-group/clari.

Flow matching is a recent state-of-the-art framework for generative modeling based on ordinary differential equations (ODEs). While closely related to diffusion models, it provides a more general perspective on generative modeling. Although inverse problem solving has been extensively explored using diffusion models, it has not been rigorously examined within the broader context of flow models. Therefore, here we extend the diffusion inverse solvers (DIS) - which perform posterior sampling by combining a denoising diffusion prior with an likelihood gradient - into the flow framework. Specifically, by driving the flow-version of Tweedie's formula, we decompose the flow ODE into two components: one for clean image estimation and the other for noise estimation. By integrating the likelihood gradient and stochastic noise into each component, respectively, we demonstrate that posterior sampling for inverse problem solving can be effectively achieved using flows. Our proposed solver, Flow-Driven Posterior Sampling (FlowDPS), can also be seamlessly integrated into a latent flow model with a transformer architecture. Across four linear inverse problems, we confirm that FlowDPS outperforms state-of-the-art alternatives, all without requiring additional training.

The multi-step denoising process in diffusion and Flow Matching models causes major efficiency issues, which motivates research on few-step generation. We present Solution Flow Models (SoFlow), a framework for one-step generation from scratch. By analyzing the relationship between the velocity function and the solution function of the velocity ordinary differential equation (ODE), we propose a Flow Matching loss and a solution consistency loss to train our models. The Flow Matching loss allows our models to provide estimated velocity fields for Classifier-Free Guidance (CFG) during training, which improves generation performance. Notably, our consistency loss does not require the calculation of the Jacobian-vector product (JVP), a common requirement in recent works that is not well-optimized in deep learning frameworks like PyTorch. Experimental results indicate that, when trained from scratch using the same Diffusion Transformer (DiT) architecture and an equal number of training epochs, our models achieve better FID-50K scores than MeanFlow models on the ImageNet 256x256 dataset.

Diffusion models have achieved significant progress in both image and video generation while still suffering from huge computation costs. As an effective solution, flow matching aims to reflow the diffusion process of diffusion models into a straight line for a few-step and even one-step generation. However, in this paper, we suggest that the original training pipeline of flow matching is not optimal and introduce two techniques to improve it. Firstly, we introduce progressive reflow, which progressively reflows the diffusion models in local timesteps until the whole diffusion progresses, reducing the difficulty of flow matching. Second, we introduce aligned v-prediction, which highlights the importance of direction matching in flow matching over magnitude matching. Experimental results on SDv1.5 and SDXL demonstrate the effectiveness of our method, for example, conducting on SDv1.5 achieves an FID of 10.70 on MSCOCO2014 validation set with only 4 sampling steps, close to our teacher model (32 DDIM steps, FID = 10.05).

Flow matching has emerged as a promising framework for training generative models, demonstrating impressive empirical performance while offering relative ease of training compared to diffusion-based models. However, this method still requires numerous function evaluations in the sampling process. To address these limitations, we introduce a self-corrected flow distillation method that effectively integrates consistency models and adversarial training within the flow-matching framework. This work is a pioneer in achieving consistent generation quality in both few-step and one-step sampling. Our extensive experiments validate the effectiveness of our method, yielding superior results both quantitatively and qualitatively on CelebA-HQ and zero-shot benchmarks on the COCO dataset. Our implementation is released at https://github.com/VinAIResearch/SCFlow

Flow matching has recently emerged as a powerful alternative to diffusion models, providing a continuous-time formulation for generative modeling and representation learning. Yet, we show that this framework suffers from a fundamental instability in the low-noise regime. As noise levels approach zero, arbitrarily small perturbations in the input can induce large variations in the velocity target, causing the condition number of the learning problem to diverge. This ill-conditioning not only slows optimization but also forces the encoder to reallocate its limited Jacobian capacity toward noise directions, thereby degrading semantic representations. We provide the first theoretical analysis of this phenomenon, which we term the low-noise pathology, establishing its intrinsic link to the structure of the flow matching objective. Building on these insights, we propose Local Contrastive Flow (LCF), a hybrid training protocol that replaces direct velocity regression with contrastive feature alignment at small noise levels, while retaining standard flow matching at moderate and high noise. Empirically, LCF not only improves convergence speed but also stabilizes representation quality. Our findings highlight the critical importance of addressing low-noise pathologies to unlock the full potential of flow matching for both generation and representation learning.

Generative machine learning methods, such as diffusion models and flow matching, have shown great potential in modeling complex system behaviors and building efficient surrogate models. However, these methods typically learn the underlying physics implicitly from data. We propose Physics-Based Flow Matching (PBFM), a novel generative framework that explicitly embeds physical constraints, both PDE residuals and algebraic relations, into the flow matching objective. We also introduce temporal unrolling at training time that improves the accuracy of the final, noise-free sample prediction. Our method jointly minimizes the flow matching loss and the physics-based residual loss without requiring hyperparameter tuning of their relative weights. Additionally, we analyze the role of the minimum noise level, sigma_{min}, in the context of physical constraints and evaluate a stochastic sampling strategy that helps to reduce physical residuals. Through extensive benchmarks on three representative PDE problems, we show that our approach yields up to an 8times more accurate physical residuals compared to FM, while clearly outperforming existing algorithms in terms of distributional accuracy. PBFM thus provides a principled and efficient framework for surrogate modeling, uncertainty quantification, and accelerated simulation in physics and engineering applications.

Molecular Dynamics (MD) is a powerful computational microscope for probing protein functions. However, the need for fine-grained integration and the long timescales of biomolecular events make MD computationally expensive. To address this, several generative models have been proposed to generate surrogate trajectories at lower cost. Yet, these models typically learn a fixed-lag transition density, causing the training signal to be dominated by frequent but uninformative transitions. We introduce a new class of generative models, MSM Emulators, which instead learn to sample transitions across discrete states defined by an underlying Markov State Model (MSM). We instantiate this class with Markov Space Flow Matching (MarS-FM), whose sampling offers more than two orders of magnitude speedup compared to implicit- or explicit-solvent MD simulations. We benchmark Mars-FM ability to reproduce MD statistics through structural observables such as RMSD, radius of gyration, and secondary structure content. Our evaluation spans protein domains (up to 500 residues) with significant chemical and structural diversity, including unfolding events, and enforces strict sequence dissimilarity between training and test sets to assess generalization. Across all metrics, MarS-FM outperforms existing methods, often by a substantial margin.

Inferring cellular dynamics from unpaired single-cell snapshots requires modeling both state transitions and population growth or death. Unbalanced dynamic optimal transport (UDOT) addresses this by penalizing growth along transport paths, making the choice of growth penalty a key way to encode biological priors on proliferation and apoptosis. However, existing UDOT solvers either rely on computationally expensive NeuralODE simulations or depend on analytical solutions of conditional paths, restricting their efficiency solely to quadratic penalties, i.e. Wasserstein-Fisher-Rao (WFR) geodesics. To enable an efficient UDOT solver for general growth penalties, we first show that concave growth penalties lead to degenerate solutions where growth and transport are separated. We then introduce Simulation-free Unbalanced Dynamic Optimal transport (SUDO), a simulation-free framework for UDOT with general non-quadratic convex growth penalties. SUDO learns the conditional paths and transport costs, solves the induced semi-coupling problem, and subsequently leverages unbalanced flow matching to achieve a simulation-free solution. On WFR benchmarks, SUDO matches the accuracy of efficient, analytical solution-driven algorithms while outperforming simulation-based methods in computational speed. Beyond WFR, SUDO supports asymmetric penalties that encode proliferation-dominant priors and produce more plausible trajectories and growth estimates on synthetic and single-cell datasets.

Diffusion models can learn rich representations during data generation, showing potential for Self-Supervised Learning (SSL), but they face a trade-off between generative quality and discriminative performance. Their iterative sampling also incurs substantial computational and energy costs, hindering industrial and edge AI applications. To address these issues, we propose the Flow Matching-based Foundation Model (FlowFM), which jointly trains a representation encoder and a conditional flow matching generator. This decoupled design achieves both high-fidelity generation and effective recognition. By using flow matching to learn a simpler velocity field, FlowFM accelerates and stabilizes training, improving its efficiency for representation learning. Experiments on wearable sensor data show FlowFM reduces training time by 50.4\% compared to a diffusion-based approach. On downstream tasks, FlowFM surpassed the state-of-the-art SSL method (SSL-Wearables) on all five datasets while achieving up to a 51.0x inference speedup and maintaining high generative quality. The implementation code is available at https://github.com/Okita-Laboratory/jointOptimizationFlowMatching.

Diffusion models have revolutionized generative tasks through high-fidelity outputs, yet flow matching (FM) offers faster inference and empirical performance gains. However, current foundation FM models are computationally prohibitive for finetuning, while diffusion models like Stable Diffusion benefit from efficient architectures and ecosystem support. This work addresses the critical challenge of efficiently transferring knowledge from pre-trained diffusion models to flow matching. We propose Diff2Flow, a novel framework that systematically bridges diffusion and FM paradigms by rescaling timesteps, aligning interpolants, and deriving FM-compatible velocity fields from diffusion predictions. This alignment enables direct and efficient FM finetuning of diffusion priors with no extra computation overhead. Our experiments demonstrate that Diff2Flow outperforms na\"ive FM and diffusion finetuning particularly under parameter-efficient constraints, while achieving superior or competitive performance across diverse downstream tasks compared to state-of-the-art methods. We will release our code at https://github.com/CompVis/diff2flow.

Continuous normalizing flows (CNFs) learn an ordinary differential equation to transform prior samples into data. Flow matching (FM) has recently emerged as a simulation-free approach for training CNFs by regressing a velocity model towards the conditional velocity field. However, on constrained domains, the learned velocity model may lead to undesirable flows that result in highly unnatural samples, e.g., oversaturated images, due to both flow matching error and simulation error. To address this, we add a boundary constraint term to CNFs, which leads to reflected CNFs that keep trajectories within the constrained domains. We propose reflected flow matching (RFM) to train the velocity model in reflected CNFs by matching the conditional velocity fields in a simulation-free manner, similar to the vanilla FM. Moreover, the analytical form of conditional velocity fields in RFM avoids potentially biased approximations, making it superior to existing score-based generative models on constrained domains. We demonstrate that RFM achieves comparable or better results on standard image benchmarks and produces high-quality class-conditioned samples under high guidance weight.

Flow matching casts sample generation as learning a continuous-time velocity field that transports noise to data. Existing flow matching networks typically predict each point's velocity independently, considering only its location and time along its flow trajectory, and ignoring neighboring points. However, this pointwise approach may overlook correlations between points along the generation trajectory that could enhance velocity predictions, thereby improving downstream generation quality. To address this, we propose Graph Flow Matching (GFM), a lightweight enhancement that decomposes the learned velocity into a reaction term -- any standard flow matching network -- and a diffusion term that aggregates neighbor information via a graph neural module. This reaction-diffusion formulation retains the scalability of deep flow models while enriching velocity predictions with local context, all at minimal additional computational cost. Operating in the latent space of a pretrained variational autoencoder, GFM consistently improves Fr\'echet Inception Distance (FID) and recall across five image generation benchmarks (LSUN Church, LSUN Bedroom, FFHQ, AFHQ-Cat, and CelebA-HQ at 256times256), demonstrating its effectiveness as a modular enhancement to existing flow matching architectures.

Flow matching models excel at generative modeling, and many downstream applications require their samples to satisfy prescribed constraints, such as observed measurements and physical laws. However, existing constrained samplers often face a trade-off: enforcing constraints can substantially displace samples from the pretrained data distribution. To address this trade-off, we introduce MintFlow, a training-free constrained sampling framework that formulates constraint enforcement as a minimal intervention on the pretrained flow trajectory. MintFlow seeks the minimal perturbation of an intermediate flow state such that its subsequent evolution under the pretrained flow field satisfies the target constraint. By minimally perturbing the flow state while keeping the pretrained flow field unchanged, MintFlow enforces the constraint while minimizing unnecessary deviation from the pretrained distribution. An adjoint formulation yields a closed-form expression for this perturbation, eliminating expensive iterative optimization. Furthermore, MintFlow adaptively selects the intervention time to balance the required perturbation magnitude with its amplification by the remaining flow. Across a range of tasks in generative vision and physical system modeling, MintFlow achieves competitive constraint satisfaction while preserving the pretrained generative distribution substantially better than state-of-the-art constrained methods.

Flow matching models have emerged as a powerful method for generative modeling on domains like images or videos, and even on irregular or unstructured data like 3D point clouds or even protein structures. These models are commonly trained in two stages: first, a data compressor is trained, and in a subsequent training stage a flow matching generative model is trained in the latent space of the data compressor. This two-stage paradigm sets obstacles for unifying models across data domains, as hand-crafted compressors architectures are used for different data modalities. To this end, we introduce INRFlow, a domain-agnostic approach to learn flow matching transformers directly in ambient space. Drawing inspiration from INRs, we introduce a conditionally independent point-wise training objective that enables INRFlow to make predictions continuously in coordinate space. Our empirical results demonstrate that INRFlow effectively handles different data modalities such as images, 3D point clouds and protein structure data, achieving strong performance in different domains and outperforming comparable approaches. INRFlow is a promising step towards domain-agnostic flow matching generative models that can be trivially adopted in different data domains.

Flow matching has emerged as a powerful generative modeling approach with flexible choices of source distribution. While Gaussian distributions are commonly used, the potential for better alternatives in high-dimensional data generation remains largely unexplored. In this paper, we propose a novel 2D simulation that captures high-dimensional geometric properties in an interpretable 2D setting, enabling us to analyze the learning dynamics of flow matching during training. Based on this analysis, we derive several key insights about flow matching behavior: (1) density approximation can paradoxically degrade performance due to mode discrepancy, (2) directional alignment suffers from path entanglement when overly concentrated, (3) Gaussian's omnidirectional coverage ensures robust learning, and (4) norm misalignment incurs substantial learning costs. Building on these insights, we propose a practical framework that combines norm-aligned training with directionally-pruned sampling. This approach maintains the robust omnidirectional supervision essential for stable flow learning, while eliminating initializations in data-sparse regions during inference. Importantly, our pruning strategy can be applied to any flow matching model trained with a Gaussian source, providing immediate performance gains without the need for retraining. Empirical evaluations demonstrate consistent improvements in both generation quality and sampling efficiency. Our findings provide practical insights and guidelines for source distribution design and introduce a readily applicable technique for improving existing flow matching models. Our code is available at https://github.com/kwanseokk/SourceFM.

Diffusion or flow-based models are powerful generative paradigms that are notoriously hard to sample as samples are defined as solutions to high-dimensional Ordinary or Stochastic Differential Equations (ODEs/SDEs) which require a large Number of Function Evaluations (NFE) to approximate well. Existing methods to alleviate the costly sampling process include model distillation and designing dedicated ODE solvers. However, distillation is costly to train and sometimes can deteriorate quality, while dedicated solvers still require relatively large NFE to produce high quality samples. In this paper we introduce "Bespoke solvers", a novel framework for constructing custom ODE solvers tailored to the ODE of a given pre-trained flow model. Our approach optimizes an order consistent and parameter-efficient solver (e.g., with 80 learnable parameters), is trained for roughly 1% of the GPU time required for training the pre-trained model, and significantly improves approximation and generation quality compared to dedicated solvers. For example, a Bespoke solver for a CIFAR10 model produces samples with Fr\'echet Inception Distance (FID) of 2.73 with 10 NFE, and gets to 1% of the Ground Truth (GT) FID (2.59) for this model with only 20 NFE. On the more challenging ImageNet-64times64, Bespoke samples at 2.2 FID with 10 NFE, and gets within 2% of GT FID (1.71) with 20 NFE.

We propose Riemannian Flow Matching (RFM), a simple yet powerful framework for training continuous normalizing flows on manifolds. Existing methods for generative modeling on manifolds either require expensive simulation, are inherently unable to scale to high dimensions, or use approximations for limiting quantities that result in biased training objectives. Riemannian Flow Matching bypasses these limitations and offers several advantages over previous approaches: it is simulation-free on simple geometries, does not require divergence computation, and computes its target vector field in closed-form. The key ingredient behind RFM is the construction of a relatively simple premetric for defining target vector fields, which encompasses the existing Euclidean case. To extend to general geometries, we rely on the use of spectral decompositions to efficiently compute premetrics on the fly. Our method achieves state-of-the-art performance on many real-world non-Euclidean datasets, and we demonstrate tractable training on general geometries, including triangular meshes with highly non-trivial curvature and boundaries.

Generating high-quality time series data has emerged as a critical research topic due to its broad utility in supporting downstream time series mining tasks. A major challenge lies in modeling the intrinsic stochasticity of temporal dynamics, as real-world sequences often exhibit random fluctuations and localized variations. While diffusion models have achieved remarkable success, their generation process is computationally inefficient, often requiring hundreds to thousands of expensive function evaluations per sample. Flow matching has emerged as a more efficient paradigm, yet its conventional ordinary differential equation (ODE)-based formulation fails to explicitly capture stochasticity, thereby limiting the fidelity of generated sequences. By contrast, stochastic differential equation (SDE) are naturally suited for modeling randomness and uncertainty. Motivated by these insights, we propose TimeFlow, a novel SDE-based flow matching framework that integrates a encoder-only architecture. Specifically, we design a component-wise decomposed velocity field to capture the multi-faceted structure of time series and augment the vanilla flow-matching optimization with an additional stochastic term to enhance representational expressiveness. TimeFlow is flexible and general, supporting both unconditional and conditional generation tasks within a unified framework. Extensive experiments across diverse datasets demonstrate that our model consistently outperforms strong baselines in generation quality, diversity, and efficiency.

Discrete diffusion or flow models could enable faster and more controllable sequence generation than autoregressive models. We show that na\"ive linear flow matching on the simplex is insufficient toward this goal since it suffers from discontinuities in the training target and further pathologies. To overcome this, we develop Dirichlet flow matching on the simplex based on mixtures of Dirichlet distributions as probability paths. In this framework, we derive a connection between the mixtures' scores and the flow's vector field that allows for classifier and classifier-free guidance. Further, we provide distilled Dirichlet flow matching, which enables one-step sequence generation with minimal performance hits, resulting in O(L) speedups compared to autoregressive models. On complex DNA sequence generation tasks, we demonstrate superior performance compared to all baselines in distributional metrics and in achieving desired design targets for generated sequences. Finally, we show that our classifier-free guidance approach improves unconditional generation and is effective for generating DNA that satisfies design targets. Code is available at https://github.com/HannesStark/dirichlet-flow-matching.

The numerical solution of partial differential equations (PDEs) is difficult, having led to a century of research so far. Recently, there have been pushes to build neural--numerical hybrid solvers, which piggy-backs the modern trend towards fully end-to-end learned systems. Most works so far can only generalize over a subset of properties to which a generic solver would be faced, including: resolution, topology, geometry, boundary conditions, domain discretization regularity, dimensionality, etc. In this work, we build a solver, satisfying these properties, where all the components are based on neural message passing, replacing all heuristically designed components in the computation graph with backprop-optimized neural function approximators. We show that neural message passing solvers representationally contain some classical methods, such as finite differences, finite volumes, and WENO schemes. In order to encourage stability in training autoregressive models, we put forward a method that is based on the principle of zero-stability, posing stability as a domain adaptation problem. We validate our method on various fluid-like flow problems, demonstrating fast, stable, and accurate performance across different domain topologies, equation parameters, discretizations, etc., in 1D and 2D.

We propose Flow-GRPO, the first method integrating online reinforcement learning (RL) into flow matching models. Our approach uses two key strategies: (1) an ODE-to-SDE conversion that transforms a deterministic Ordinary Differential Equation (ODE) into an equivalent Stochastic Differential Equation (SDE) that matches the original model's marginal distribution at all timesteps, enabling statistical sampling for RL exploration; and (2) a Denoising Reduction strategy that reduces training denoising steps while retaining the original inference timestep number, significantly improving sampling efficiency without performance degradation. Empirically, Flow-GRPO is effective across multiple text-to-image tasks. For complex compositions, RL-tuned SD3.5 generates nearly perfect object counts, spatial relations, and fine-grained attributes, boosting GenEval accuracy from 63% to 95%. In visual text rendering, its accuracy improves from 59% to 92%, significantly enhancing text generation. Flow-GRPO also achieves substantial gains in human preference alignment. Notably, little to no reward hacking occurred, meaning rewards did not increase at the cost of image quality or diversity, and both remained stable in our experiments.

With the success of flow matching in visual generation, sampling efficiency remains a critical bottleneck for its practical application. Among flow models' accelerating methods, ReFlow has been somehow overlooked although it has theoretical consistency with flow matching. This is primarily due to its suboptimal performance in practical scenarios compared to consistency distillation and score distillation. In this work, we investigate this issue within the ReFlow framework and propose FlowSteer, a method unlocks the potential of ReFlow-based distillation by guiding the student along teacher's authentic generation trajectories. We first identify that Piecewised ReFlow's performance is hampered by a critical distribution mismatch during the training and propose Online Trajectory Alignment(OTA) to resolve it. Then, we introduce a adversarial distillation objective applied directly on the ODE trajectory, improving the student's adherence to the teacher's generation trajectory. Furthermore, we find and fix a previously undiscovered flaw in the widely-used FlowMatchEulerDiscreteScheduler that largely degrades few-step inference quality. Our experiment result on SD3 demonstrates our method's efficacy.

Flow matching has emerged as a scalable paradigm for training high-quality generative models, but sampling from the learned probability flow requires many network evaluations. Distillation can reduce this cost to one or a few evaluations; however, one-step generation often sacrifices quality, making few-step generation the practical operating regime. Existing few-step methods perform their iterative computation along the probability flow and therefore require a fixed, manually chosen timestep discretization. This discretization is often chosen heuristically and is expensive to tune; it may also be restrictive when refinement difficulty differs across samples or spatial locations. We introduce data-space iteration, a few-step generation framework that removes flow discretization altogether. Starting from noise, a shared generator directly refines its prediction in data space, with every iteration trained to produce the best sample permitted by its capacity. Our formulation integrates with distribution matching distillation (DMD) with minimal changes, enabling a controlled comparison between iteration methods under matched training settings. On class-conditional ImageNet 256x256, data-space iteration outperforms standard discretization baselines and matches or improves upon variants selected through schedule search, without requiring schedule-specific training. These results show that data-space iteration provides a simple and effective alternative to discretized flow-space iteration for fast generation.

Rectified-flow-based diffusion transformers, such as FLUX and OpenSora, have demonstrated exceptional performance in the field of image and video generation. Despite their robust generative capabilities, these models often suffer from inaccurate inversion, which could further limit their effectiveness in downstream tasks such as image and video editing. To address this issue, we propose RF-Solver, a novel training-free sampler that enhances inversion precision by reducing errors in the process of solving rectified flow ODEs. Specifically, we derive the exact formulation of the rectified flow ODE and perform a high-order Taylor expansion to estimate its nonlinear components, significantly decreasing the approximation error at each timestep. Building upon RF-Solver, we further design RF-Edit, which comprises specialized sub-modules for image and video editing. By sharing self-attention layer features during the editing process, RF-Edit effectively preserves the structural information of the source image or video while achieving high-quality editing results. Our approach is compatible with any pre-trained rectified-flow-based models for image and video tasks, requiring no additional training or optimization. Extensive experiments on text-to-image generation, image & video inversion, and image & video editing demonstrate the robust performance and adaptability of our methods. Code is available at https://github.com/wangjiangshan0725/RF-Solver-Edit.

Unconditional flow-matching trains diffusion models to transport samples from a source distribution to a target distribution by enforcing that the flows between sample pairs are unique. However, in conditional settings (e.g., class-conditioned models), this uniqueness is no longer guaranteed--flows from different conditions may overlap, leading to more ambiguous generations. We introduce Contrastive Flow Matching, an extension to the flow matching objective that explicitly enforces uniqueness across all conditional flows, enhancing condition separation. Our approach adds a contrastive objective that maximizes dissimilarities between predicted flows from arbitrary sample pairs. We validate Contrastive Flow Matching by conducting extensive experiments across varying model architectures on both class-conditioned (ImageNet-1k) and text-to-image (CC3M) benchmarks. Notably, we find that training models with Contrastive Flow Matching (1) improves training speed by a factor of up to 9x, (2) requires up to 5x fewer de-noising steps and (3) lowers FID by up to 8.9 compared to training the same models with flow matching. We release our code at: https://github.com/gstoica27/DeltaFM.git.

Conditional flow matching (CFM) has emerged as a powerful framework for training continuous normalizing flows due to its computational efficiency and effectiveness. However, standard CFM often produces paths that deviate significantly from straight-line interpolations between prior and target distributions, making generation slower and less accurate due to the need for fine discretization at inference. Recent methods enhance CFM performance by inducing shorter and straighter trajectories but typically rely on computationally expensive mini-batch optimal transport (OT). Drawing insights from entropic optimal transport (EOT), we propose Weighted Conditional Flow Matching (W-CFM), a novel approach that modifies the classical CFM loss by weighting each training pair (x, y) with a Gibbs kernel. We show that this weighting recovers the entropic OT coupling up to some bias in the marginals, and we provide the conditions under which the marginals remain nearly unchanged. Moreover, we establish an equivalence between W-CFM and the minibatch OT method in the large-batch limit, showing how our method overcomes computational and performance bottlenecks linked to batch size. Empirically, we test our method on unconditional generation on various synthetic and real datasets, confirming that W-CFM achieves comparable or superior sample quality, fidelity, and diversity to other alternative baselines while maintaining the computational efficiency of vanilla CFM.

We present FrameFlow, a method for fast protein backbone generation using SE(3) flow matching. Specifically, we adapt FrameDiff, a state-of-the-art diffusion model, to the flow-matching generative modeling paradigm. We show how flow matching can be applied on SE(3) and propose modifications during training to effectively learn the vector field. Compared to FrameDiff, FrameFlow requires five times fewer sampling timesteps while achieving two fold better designability. The ability to generate high quality protein samples at a fraction of the cost of previous methods paves the way towards more efficient generative models in de novo protein design.

Existing approaches to controllable generation typically rely on fine-tuning, auxiliary networks, or test-time search. We show that flow matching admits a different control interface: adaptation through examples. For deterministic interpolants, the velocity field is solely governed by a conditional endpoint mean; shifting this mean shifts the flow itself. This yields a simple principle for controllable generation: steer a pretrained model by changing the reference set it follows. We instantiate this idea in two forms. Reference-Mean Guidance is training-free: it computes a closed-form endpoint-mean correction from a reference bank and applies it to a frozen FLUX.2-klein (4B) model, enabling control of color, identity, style, and structure while keeping the prompt, seed, and weights fixed. Semi-Parametric Guidance amortizes the same idea through an explicit mean anchor and learned residual refiner, matching unconditional DiT-B/4 quality on AFHQv2 while allowing the reference set to be swapped at inference time. These results point to a broader direction: generative models that adapt through data, not parameter updates.

Recent work has shown that leveraging learned predictions can improve the running time of algorithms for bipartite matching and similar combinatorial problems. In this work, we build on this idea to improve the performance of the widely used Ford-Fulkerson algorithm for computing maximum flows by seeding Ford-Fulkerson with predicted flows. Our proposed method offers strong theoretical performance in terms of the quality of the prediction. We then consider image segmentation, a common use-case of flows in computer vision, and complement our theoretical analysis with strong empirical results.

Flow Matching (FM) constructs linear conditional probability paths, but the learned marginal velocity field inevitably exhibits strong curvature due to trajectory superposition. This curvature severely inflates numerical truncation errors, bottlenecking few-step sampling. To overcome this, we introduce Isokinetic Flow Matching (Iso-FM), a lightweight, Jacobian-free dynamical regularizer that directly penalizes pathwise acceleration. By using a self-guided finite-difference approximation of the material derivative Dv/Dt, Iso-FM enforces local velocity consistency without requiring auxiliary encoders or expensive second-order autodifferentiation. Operating as a pure plug-and-play addition to single-stage FM training, Iso-FM dramatically improves few-step generation. On CIFAR-10 (DiT-S/2), Iso-FM slashes conditional non-OT FID at 2 steps from 78.82 to 27.13 - a 2.9x relative efficiency gain - and reaches a best-observed FID at 4 steps of 10.23. These results firmly establish acceleration regularization as a principled, compute-efficient mechanism for fast generative sampling.

Flow Matching (FM) algorithm achieves remarkable results in generative tasks especially in robotic manipulation. Building upon the foundations of diffusion models, the simulation-free paradigm of FM enables simple and efficient training, but inherently introduces a train-inference gap. Specifically, we cannot assess the model's output during the training phase. In contrast, other generative models including Variational Autoencoder (VAE), Normalizing Flow and Generative Adversarial Networks (GANs) directly optimize on the reconstruction loss. Such a gap is particularly evident in scenarios that demand high precision, such as robotic manipulation. Moreover, we show that FM's over-pursuit of straight predefined paths may introduce some serious problems such as stiffness into the system. These motivate us to fine-tune FM via Maximum Likelihood Estimation of reconstructions - an approach made feasible by FM's underlying smooth ODE formulation, in contrast to the stochastic differential equations (SDEs) used in diffusion models. This paper first theoretically analyzes the relation between training loss and inference error in FM. Then we propose a method of fine-tuning FM via Maximum Likelihood Estimation of reconstructions, which includes both straightforward fine-tuning and residual-based fine-tuning approaches. Furthermore, through specifically designed architectures, the residual-based fine-tuning can incorporate the contraction property into the model, which is crucial for the model's robustness and interpretability. Experimental results in image generation and robotic manipulation verify that our method reliably improves the inference performance of FM.

Diffusion and flow matching models generate high-fidelity data by simulating paths defined by Ordinary or Stochastic Differential Equations (ODEs/SDEs), starting from a tractable prior distribution. The probability flow ODE formulation enables the use of advanced numerical solvers to accelerate sampling. Orthogonal yet vital to solver design is the discretization strategy. While early approaches employed handcrafted heuristics and recent methods adopt optimization-based techniques, most existing strategies enforce a globally shared timestep schedule across all samples. This uniform treatment fails to account for instance-specific complexity in the generative process, potentially limiting performance. Motivated by controlled experiments on synthetic data, which reveals the suboptimality of global schedules under instance-specific dynamics, we propose an instance-aware discretization framework. Our method learns to adapt timestep allocations based on input-dependent priors, extending gradient-based discretization search to the conditional generative setting. Empirical results across diverse settings, including synthetic data, pixel-space diffusion, latent-space images and video flow matching models, demonstrate that our method consistently improves generation quality with marginal tuning cost compared to training and negligible inference overhead.

We introduce COT-FM, a general framework that reshapes the probability path in Flow Matching (FM) to achieve faster and more reliable generation. FM models often produce curved trajectories due to random or batchwise couplings, which increase discretization error and reduce sample quality. COT-FM fixes this by clustering target samples and assigning each cluster a dedicated source distribution obtained by reversing pretrained FM models. This divide-and-conquer strategy yields more accurate local transport and significantly straighter vector fields, all without changing the model architecture. As a plug-and-play approach, COT-FM consistently accelerates sampling and improves generation quality across 2D datasets, image generation benchmarks, and robotic manipulation tasks.

Flow-based generative models achieve state-of-the-art sample quality, but require the expensive solution of a differential equation at inference time. Flow map models, commonly known as consistency models, encompass many recent efforts to improve inference-time efficiency by learning the solution operator of this differential equation. Yet despite their promise, these models lack a unified description that clearly explains how to learn them efficiently in practice. Here, building on the methodology proposed in Boffi et. al. (2024), we present a systematic algorithmic framework for directly learning the flow map associated with a flow or diffusion model. By exploiting a relationship between the velocity field underlying a continuous-time flow and the instantaneous rate of change of the flow map, we show how to convert any distillation scheme into a direct training algorithm via self-distillation, eliminating the need for pre-trained teachers. We introduce three algorithmic families based on different mathematical characterizations of the flow map: Eulerian, Lagrangian, and Progressive methods, which we show encompass and extend all known distillation and direct training schemes for consistency models. We find that the novel class of Lagrangian methods, which avoid both spatial derivatives and bootstrapping from small steps by design, achieve significantly more stable training and higher performance than more standard Eulerian and Progressive schemes. Our methodology unifies existing training schemes under a single common framework and reveals new design principles for accelerated generative modeling. Associated code is available at https://github.com/nmboffi/flow-maps.

The remarkable success of diffusion and flow-matching models has ignited a surge of works on adapting them at test time for controlled generation tasks. Examples range from image editing to restoration, compression and personalization. However, due to the iterative nature of the sampling process in those models, it is computationally impractical to use gradient-based optimization to directly control the image generated at the end of the process. As a result, existing methods typically resort to manipulating each timestep separately. Here we introduce FlowOpt - a zero-order (gradient-free) optimization framework that treats the entire flow process as a black box, enabling optimization through the whole sampling path without backpropagation through the model. Our method is both highly efficient and allows users to monitor the intermediate optimization results and perform early stopping if desired. We prove a sufficient condition on FlowOpt's step-size, under which convergence to the global optimum is guaranteed. We further show how to empirically estimate this upper bound so as to choose an appropriate step-size. We demonstrate how FlowOpt can be used for image editing, showcasing two options: (i) inversion (determining the initial noise that generates a given image), and (ii) directly steering the edited image to be similar to the source image while conforming to a target text prompt. In both cases, FlowOpt achieves state-of-the-art results while using roughly the same number of neural function evaluations (NFEs) as existing methods. Code and examples are available on the project's webpage.

Flow matching retains the generation quality of diffusion models while enabling substantially faster inference, making it a compelling paradigm for generative modeling. However, when applied to language modeling, it exhibits fundamental limitations in representing complex latent distributions with irregular geometries, such as anisotropy and multimodality. To address these challenges, we propose a mixture-of-experts flow matching (MoE-FM) framework, which captures complex global transport geometries in latent space by decomposing them into locally specialized vector fields. Building on MoE-FM, we develop a non-autoregressive (NAR) language modeling approach, named YAN, instantiated with both Transformer and Mamba architectures. Across multiple downstream tasks, YAN achieves generation quality on par with both autoregressive (AR) and diffusion-based NAR language models, while requiring as few as three sampling steps. This yields a 40times speedup over AR baselines and up to a 10^3times speedup over diffusion language models, demonstrating substantial efficiency advantages for language modeling.

Simulating fluid flow around arbitrary shapes is key to solving various engineering problems. However, simulating flow physics across complex geometries remains numerically challenging and computationally resource-intensive, particularly when using conventional PDE solvers. Machine learning methods offer attractive opportunities to create fast and adaptable PDE solvers. However, benchmark datasets to measure the performance of such methods are scarce, especially for flow physics across complex geometries. We introduce FlowBench, a dataset for neural simulators with over 10K samples, which is currently larger than any publicly available flow physics dataset. FlowBench contains flow simulation data across complex geometries (parametric vs. non-parametric), spanning a range of flow conditions (Reynolds number and Grashoff number), capturing a diverse array of flow phenomena (steady vs. transient; forced vs. free convection), and for both 2D and 3D. FlowBench contains over 10K data samples, with each sample the outcome of a fully resolved, direct numerical simulation using a well-validated simulator framework designed for modeling transport phenomena in complex geometries. For each sample, we include velocity, pressure, and temperature field data at 3 different resolutions and several summary statistics features of engineering relevance (such as coefficients of lift and drag, and Nusselt numbers). %Additionally, we include masks and signed distance fields for each shape. We envision that FlowBench will enable evaluating the interplay between complex geometry, coupled flow phenomena, and data sufficiency on the performance of current, and future, neural PDE solvers. We enumerate several evaluation metrics to help rank order the performance of neural PDE solvers. We benchmark the performance of several baseline methods including FNO, CNO, WNO, and DeepONet.

We present a formulation of flow matching as variational inference, which we refer to as variational flow matching (VFM). Based on this formulation we develop CatFlow, a flow matching method for categorical data. CatFlow is easy to implement, computationally efficient, and achieves strong results on graph generation tasks. In VFM, the objective is to approximate the posterior probability path, which is a distribution over possible end points of a trajectory. We show that VFM admits both the CatFlow objective and the original flow matching objective as special cases. We also relate VFM to score-based models, in which the dynamics are stochastic rather than deterministic, and derive a bound on the model likelihood based on a reweighted VFM objective. We evaluate CatFlow on one abstract graph generation task and two molecular generation tasks. In all cases, CatFlow exceeds or matches performance of the current state-of-the-art models.

Despite Flow Matching and diffusion models having emerged as powerful generative paradigms for continuous variables such as images and videos, their application to high-dimensional discrete data, such as language, is still limited. In this work, we present Discrete Flow Matching, a novel discrete flow paradigm designed specifically for generating discrete data. Discrete Flow Matching offers several key contributions: (i) it works with a general family of probability paths interpolating between source and target distributions; (ii) it allows for a generic formula for sampling from these probability paths using learned posteriors such as the probability denoiser (x-prediction) and noise-prediction (epsilon-prediction); (iii) practically, focusing on specific probability paths defined with different schedulers considerably improves generative perplexity compared to previous discrete diffusion and flow models; and (iv) by scaling Discrete Flow Matching models up to 1.7B parameters, we reach 6.7% Pass@1 and 13.4% Pass@10 on HumanEval and 6.7% Pass@1 and 20.6% Pass@10 on 1-shot MBPP coding benchmarks. Our approach is capable of generating high-quality discrete data in a non-autoregressive fashion, significantly closing the gap between autoregressive models and discrete flow models.

Recently, Flow Matching models have pushed the boundaries of high-fidelity data generation across a wide range of domains. It typically employs a single large network to learn the entire generative trajectory from noise to data. Despite their effectiveness, this design struggles to capture distinct signal characteristics across timesteps simultaneously and incurs substantial inference costs due to the iterative evaluation of the entire model. To address these limitations, we propose Blockwise Flow Matching (BFM), a novel framework that partitions the generative trajectory into multiple temporal segments, each modeled by smaller but specialized velocity blocks. This blockwise design enables each block to specialize effectively in its designated interval, improving inference efficiency and sample quality. To further enhance generation fidelity, we introduce a Semantic Feature Guidance module that explicitly conditions velocity blocks on semantically rich features aligned with pretrained representations. Additionally, we propose a lightweight Feature Residual Approximation strategy that preserves semantic quality while significantly reducing inference cost. Extensive experiments on ImageNet 256x256 demonstrate that BFM establishes a substantially improved Pareto frontier over existing Flow Matching methods, achieving 2.1x to 4.9x accelerations in inference complexity at comparable generation performance. Code is available at https://github.com/mlvlab/BFM.

Diffusion models have greatly improved visual generation but are hindered by slow generation speed due to the computationally intensive nature of solving generative ODEs. Rectified flow, a widely recognized solution, improves generation speed by straightening the ODE path. Its key components include: 1) using the diffusion form of flow-matching, 2) employing boldsymbol v-prediction, and 3) performing rectification (a.k.a. reflow). In this paper, we argue that the success of rectification primarily lies in using a pretrained diffusion model to obtain matched pairs of noise and samples, followed by retraining with these matched noise-sample pairs. Based on this, components 1) and 2) are unnecessary. Furthermore, we highlight that straightness is not an essential training target for rectification; rather, it is a specific case of flow-matching models. The more critical training target is to achieve a first-order approximate ODE path, which is inherently curved for models like DDPM and Sub-VP. Building on this insight, we propose Rectified Diffusion, which generalizes the design space and application scope of rectification to encompass the broader category of diffusion models, rather than being restricted to flow-matching models. We validate our method on Stable Diffusion v1-5 and Stable Diffusion XL. Our method not only greatly simplifies the training procedure of rectified flow-based previous works (e.g., InstaFlow) but also achieves superior performance with even lower training cost. Our code is available at https://github.com/G-U-N/Rectified-Diffusion.

Flow matching models have recently emerged as an efficient alternative to diffusion, especially for text-guided image generation and editing, offering faster inference through continuous-time dynamics. However, existing flow-based editors predominantly support global or single-instruction edits and struggle with multi-instance scenarios, where multiple parts of a reference input must be edited independently without semantic interference. We identify this limitation as a consequence of globally conditioned velocity fields and joint attention mechanisms, which entangle concurrent edits. To address this issue, we introduce Instance-Disentangled Attention, a mechanism that partitions joint attention operations, enforcing binding between instance-specific textual instructions and spatial regions during velocity field estimation. We evaluate our approach on both natural image editing and a newly introduced benchmark of text-dense infographics with region-level editing instructions. Experimental results demonstrate that our approach promotes edit disentanglement and locality while preserving global output coherence, enabling single-pass, instance-level editing.

Flow Matching (FM) has recently emerged as a principled and efficient alternative to diffusion models. Standard FM encourages the learned velocity field to follow a target direction; however, it may accumulate errors along the trajectory and drive samples off the data manifold, leading to perceptual degradation, especially in lightweight or low-step configurations. To enhance stability and generalization, we extend FM into a balanced attract-repel scheme that provides explicit guidance on both "where to go" and "where not to go." To be formal, we propose Velocity Contrastive Regularization (VeCoR), a complementary training scheme for flow-based generative modeling that augments the standard FM objective with contrastive, two-sided supervision. VeCoR not only aligns the predicted velocity with a stable reference direction (positive supervision) but also pushes it away from inconsistent, off-manifold directions (negative supervision). This contrastive formulation transforms FM from a purely attractive, one-sided objective into a two-sided training signal, regularizing trajectory evolution and improving perceptual fidelity across datasets and backbones. On ImageNet-1K 256times256, VeCoR yields 22\% and 35\% relative FID reductions on SiT-XL/2 and REPA-SiT-XL/2 backbones, respectively, and achieves further FID gains (32\% relative) on MS-COCO text-to-image generation, demonstrating consistent improvements in stability, convergence, and image quality, particularly in low-step and lightweight settings. Project page: https://p458732.github.io/VeCoR_Project_Page/

Classifier-free guidance is a key component for enhancing the performance of conditional generative models across diverse tasks. While it has previously demonstrated remarkable improvements for the sample quality, it has only been exclusively employed for diffusion models. In this paper, we integrate classifier-free guidance into Flow Matching (FM) models, an alternative simulation-free approach that trains Continuous Normalizing Flows (CNFs) based on regressing vector fields. We explore the usage of Guided Flows for a variety of downstream applications. We show that Guided Flows significantly improves the sample quality in conditional image generation and zero-shot text-to-speech synthesis, boasting state-of-the-art performance. Notably, we are the first to apply flow models for plan generation in the offline reinforcement learning setting, showcasing a 10x speedup in computation compared to diffusion models while maintaining comparable performance.

Jigsaw puzzle solving has been an increasingly popular task in the computer vision research community. Recent works have utilized cutting-edge architectures and computational approaches to reassemble groups of pieces into a coherent image, while achieving increasingly good results on well established datasets. However, most of these approaches share a common, restricting setting: operating solely on strictly square puzzle pieces. In this work, we introduce GAP, a set of novel jigsaw puzzles datasets containing synthetic, heavily eroded pieces of unrestricted shapes, generated by a learned distribution of real-world archaeological fragments. We also introduce PuzzleFlow, a novel ViT and Flow-Matching based framework for jigsaw puzzle solving, capable of handling complex puzzle pieces and demonstrating superior performance on GAP when compared to both classic and recent prominent works in this domain.

Recent advancements in flow-matching have enabled high-quality text-to-image generation. However, the deterministic nature of flow-matching models makes them poorly suited for reinforcement learning, a key tool for improving image quality and human alignment. Prior work has introduced stochasticity by perturbing latents with random noise, but such perturbations are inefficient and unstable. We propose Smart-GRPO, the first method to optimize noise perturbations for reinforcement learning in flow-matching models. Smart-GRPO employs an iterative search strategy that decodes candidate perturbations, evaluates them with a reward function, and refines the noise distribution toward higher-reward regions. Experiments demonstrate that Smart-GRPO improves both reward optimization and visual quality compared to baseline methods. Our results suggest a practical path toward reinforcement learning in flow-matching frameworks, bridging the gap between efficient training and human-aligned generation.

We propose continuous adversarial flow models, a type of continuous-time flow model trained with an adversarial objective. Unlike flow matching, which uses a fixed mean-squared-error criterion, our approach introduces a learned discriminator to guide training. This change in objective induces a different generalized distribution, which empirically produces samples that are better aligned with the target data distribution. Our method is primarily proposed for post-training existing flow-matching models, although it can also train models from scratch. On the ImageNet 256px generation task, our post-training substantially improves the guidance-free FID of latent-space SiT from 8.26 to 3.63 and of pixel-space JiT from 7.17 to 3.57. It also improves guided generation, reducing FID from 2.06 to 1.53 for SiT and from 1.86 to 1.80 for JiT. We further evaluate our approach on text-to-image generation, where it achieves improved results on both the GenEval and DPG benchmarks.

Flow-based generative models are powerful exact likelihood models with efficient sampling and inference. Despite their computational efficiency, flow-based models generally have much worse density modeling performance compared to state-of-the-art autoregressive models. In this paper, we investigate and improve upon three limiting design choices employed by flow-based models in prior work: the use of uniform noise for dequantization, the use of inexpressive affine flows, and the use of purely convolutional conditioning networks in coupling layers. Based on our findings, we propose Flow++, a new flow-based model that is now the state-of-the-art non-autoregressive model for unconditional density estimation on standard image benchmarks. Our work has begun to close the significant performance gap that has so far existed between autoregressive models and flow-based models. Our implementation is available at https://github.com/aravindsrinivas/flowpp

Flow-based generative models, including diffusion models, excel at modeling continuous distributions in high-dimensional spaces. In this work, we introduce Flow Policy Optimization (FPO), a simple on-policy reinforcement learning algorithm that brings flow matching into the policy gradient framework. FPO casts policy optimization as maximizing an advantage-weighted ratio computed from the conditional flow matching loss, in a manner compatible with the popular PPO-clip framework. It sidesteps the need for exact likelihood computation while preserving the generative capabilities of flow-based models. Unlike prior approaches for diffusion-based reinforcement learning that bind training to a specific sampling method, FPO is agnostic to the choice of diffusion or flow integration at both training and inference time. We show that FPO can train diffusion-style policies from scratch in a variety of continuous control tasks. We find that flow-based models can capture multimodal action distributions and achieve higher performance than Gaussian policies, particularly in under-conditioned settings.

Flow matching has recently emerged as a promising alternative to diffusion-based generative models, particularly for text-to-image generation. Despite its flexibility in allowing arbitrary source distributions, most existing approaches rely on a standard Gaussian distribution, a choice inherited from diffusion models, and rarely consider the source distribution itself as an optimization target in such settings. In this work, we show that principled design of the source distribution is not only feasible but also beneficial at the scale of modern text-to-image systems. Specifically, we propose learning a condition-dependent source distribution under flow matching objective that better exploit rich conditioning signals. We identify key failure modes that arise when directly incorporating conditioning into the source, including distributional collapse and instability, and show that appropriate variance regularization and directional alignment between source and target are critical for stable and effective learning. We further analyze how the choice of target representation space impacts flow matching with structured sources, revealing regimes in which such designs are most effective. Extensive experiments across multiple text-to-image benchmarks demonstrate consistent and robust improvements, including up to a 3x faster convergence in FID, highlighting the practical benefits of a principled source distribution design for conditional flow matching.

Diffusion models have demonstrated remarkable generation quality but at the cost of numerous function evaluations. Recently, advanced ODE-based solvers have been developed to mitigate the substantial computational demands of reverse-diffusion solving under limited sampling steps. However, these solvers, heavily inspired by Adams-like multistep methods, rely solely on t-related Lagrange interpolation. We show that t-related Lagrange interpolation is suboptimal for diffusion model and reveal a compact search space comprised of time steps and solver coefficients. Building on our analysis, we propose a novel differentiable solver search algorithm to identify more optimal solver. Equipped with the searched solver, rectified-flow models, e.g., SiT-XL/2 and FlowDCN-XL/2, achieve FID scores of 2.40 and 2.35, respectively, on ImageNet256 with only 10 steps. Meanwhile, DDPM model, DiT-XL/2, reaches a FID score of 2.33 with only 10 steps. Notably, our searched solver outperforms traditional solvers by a significant margin. Moreover, our searched solver demonstrates generality across various model architectures, resolutions, and model sizes.

The discovery of extremal structures in mathematics requires navigating vast and nonconvex landscapes where analytical methods offer little guidance and brute-force search becomes intractable. We introduce FlowBoost, a closed-loop generative framework that learns to discover rare and extremal geometric structures by combining three components: (i) a geometry-aware conditional flow-matching model that learns to sample high-quality configurations, (ii) reward-guided policy optimization with action exploration that directly optimizes the generation process toward the objective while maintaining diversity, and (iii) stochastic local search for both training-data generation and final refinement. Unlike prior open-loop approaches, such as PatternBoost that retrains on filtered discrete samples, or AlphaEvolve which relies on frozen Large Language Models (LLMs) as evolutionary mutation operators, FlowBoost enforces geometric feasibility during sampling, and propagates reward signal directly into the generative model, closing the optimization loop and requiring much smaller training sets and shorter training times, and reducing the required outer-loop iterations by orders of magnitude, while eliminating dependence on LLMs. We demonstrate the framework on four geometric optimization problems: sphere packing in hypercubes, circle packing maximizing sum of radii, the Heilbronn triangle problem, and star discrepancy minimization. In several cases, FlowBoost discovers configurations that match or exceed the best known results. For circle packings, we improve the best known lower bounds, surpassing the LLM-based system AlphaEvolve while using substantially fewer computational resources.

Data-driven modeling of fluid dynamics has advanced rapidly with neural PDE solvers, yet a fair and strong benchmark remains fragmented due to the absence of unified PDE datasets and standardized evaluation protocols. Although architectural innovations are abundant, fair assessment is further impeded by the lack of clear disentanglement between spatial, temporal and loss modules. In this paper, we introduce FD-Bench, the first fair, modular, comprehensive and reproducible benchmark for data-driven fluid simulation. FD-Bench systematically evaluates 85 baseline models across 10 representative flow scenarios under a unified experimental setup. It provides four key contributions: (1) a modular design enabling fair comparisons across spatial, temporal, and loss function modules; (2) the first systematic framework for direct comparison with traditional numerical solvers; (3) fine-grained generalization analysis across resolutions, initial conditions, and temporal windows; and (4) a user-friendly, extensible codebase to support future research. Through rigorous empirical studies, FD-Bench establishes the most comprehensive leaderboard to date, resolving long-standing issues in reproducibility and comparability, and laying a foundation for robust evaluation of future data-driven fluid models. The code is open-sourced at https://anonymous.4open.science/r/FD-Bench-15BC.

Finding a suitable layout represents a crucial task for diverse applications in graphic design. Motivated by simpler and smoother sampling trajectories, we explore the use of Flow Matching as an alternative to current diffusion-based layout generation models. Specifically, we propose LayoutFlow, an efficient flow-based model capable of generating high-quality layouts. Instead of progressively denoising the elements of a noisy layout, our method learns to gradually move, or flow, the elements of an initial sample until it reaches its final prediction. In addition, we employ a conditioning scheme that allows us to handle various generation tasks with varying degrees of conditioning with a single model. Empirically, LayoutFlow performs on par with state-of-the-art models while being significantly faster.

MeanFlow has recently emerged as a powerful framework for few-step generative modeling trained from scratch, but its success is not yet fully understood. In this work, we show that the MeanFlow objective naturally decomposes into two parts: trajectory flow matching and trajectory consistency. Through gradient analysis, we find that these terms are strongly negatively correlated, causing optimization conflict and slow convergence. Motivated by these insights, we introduce alpha-Flow, a broad family of objectives that unifies trajectory flow matching, Shortcut Model, and MeanFlow under one formulation. By adopting a curriculum strategy that smoothly anneals from trajectory flow matching to MeanFlow, alpha-Flow disentangles the conflicting objectives, and achieves better convergence. When trained from scratch on class-conditional ImageNet-1K 256x256 with vanilla DiT backbones, alpha-Flow consistently outperforms MeanFlow across scales and settings. Our largest alpha-Flow-XL/2+ model achieves new state-of-the-art results using vanilla DiT backbones, with FID scores of 2.58 (1-NFE) and 2.15 (2-NFE).

Flow-based methods have achieved significant success in various generative modeling tasks, capturing nuanced details within complex data distributions. However, few existing works have exploited this unique capability to resolve fine-grained structural details beyond generation tasks. This paper presents a flow-inspired framework for representation learning. First, we demonstrate that a rectified flow trained using independent coupling is zero everywhere at t=0.5 if and only if the source and target distributions are identical. We term this property the zero-flow criterion. Second, we show that this criterion can certify conditional independence, thereby extracting sufficient information from the data. Third, we translate this criterion into a tractable, simulation-free loss function that enables learning amortized Markov blankets in graphical models and latent representations in self-supervised learning tasks. Experiments on both simulated and real-world datasets demonstrate the effectiveness of our approach. The code reproducing our experiments can be found at: https://github.com/probabilityFLOW/zfe.

We present Piecewise Rectified Flow (PeRFlow), a flow-based method for accelerating diffusion models. PeRFlow divides the sampling process of generative flows into several time windows and straightens the trajectories in each interval via the reflow operation, thereby approaching piecewise linear flows. PeRFlow achieves superior performance in a few-step generation. Moreover, through dedicated parameterizations, the obtained PeRFlow models show advantageous transfer ability, serving as universal plug-and-play accelerators that are compatible with various workflows based on the pre-trained diffusion models. The implementations of training and inference are fully open-sourced. https://github.com/magic-research/piecewise-rectified-flow

The problem of designing NLP solvers for math word problems (MWP) has seen sustained research activity and steady gains in the test accuracy. Since existing solvers achieve high performance on the benchmark datasets for elementary level MWPs containing one-unknown arithmetic word problems, such problems are often considered "solved" with the bulk of research attention moving to more complex MWPs. In this paper, we restrict our attention to English MWPs taught in grades four and lower. We provide strong evidence that the existing MWP solvers rely on shallow heuristics to achieve high performance on the benchmark datasets. To this end, we show that MWP solvers that do not have access to the question asked in the MWP can still solve a large fraction of MWPs. Similarly, models that treat MWPs as bag-of-words can also achieve surprisingly high accuracy. Further, we introduce a challenge dataset, SVAMP, created by applying carefully chosen variations over examples sampled from existing datasets. The best accuracy achieved by state-of-the-art models is substantially lower on SVAMP, thus showing that much remains to be done even for the simplest of the MWPs.

Flow matching (FM) trains a time-dependent vector field that transports samples from a simple prior to a complex data distribution. However, for high-dimensional images, each training sample supervises only a single trajectory and intermediate point, yielding an extremely sparse and high-variance training signal. This under-constrained supervision can cause flow collapse, where the learned dynamics memorize specific source-target pairings, mapping diverse inputs to overly similar outputs, failing to generalize. We introduce Posterior-Augmented Flow Matching (PAFM), a theoretically grounded generalization of FM that replaces single-target supervision with an expectation over an approximate posterior of valid target completions for a given intermediate state and condition. PAFM factorizes this intractable posterior into (i) the likelihood of the intermediate under a hypothesized endpoint and (ii) the prior probability of that endpoint under the condition, and uses an importance sampling scheme to construct a mixture over multiple candidate targets. We prove that PAFM yields an unbiased estimator of the original FM objective while substantially reducing gradient variance during training by aggregating information from many plausible continuation trajectories per intermediate. Finally, we show that PAFM improves over FM by up to 3.4 FID50K across different model scales (SiT-B/2 and SiT-XL/2), different architectures (SiT and MMDiT), and in both class and text conditioned benchmarks (ImageNet and CC12M), with a negligible increase in the compute overhead. Code: https://github.com/gstoica27/PAFM.git.

Flow matching with x-prediction -- regressing the clean data point rather than the ambient velocity -- is known to exploit low-dimensional manifold structure effectively in pixel space li2025back. We ask whether a pretrained representation space, while containing a low-dimensional data manifold of comparable intrinsic dimensionality, offers a distribution more favorable for flow-matching learning. Comparing pixel, SD-VAE, and DINOv2 features along four geometric axes, we find that pixel and DINOv2 share nearly identical intrinsic dimensionalities (both d!approx!33) yet DINOv2 exhibits 7.3times higher effective rank, 35times better covariance conditioning, 11.5times lower excess kurtosis, and 1.7times lower on-manifold interpolation error; SD-VAE latents are consistently intermediate, indicating that the advantage stems from representation-learning objectives rather than mere compression. These statistical properties render the flow-matching regression well-conditioned and remove the need for the specialized prediction heads or Riemannian transport used by prior DINOv2 diffusion methods. We propose the Representation Image Transformer (RiT): a vanilla Diffusion Transformer trained by x-prediction on frozen DINOv2 features, augmented only by a dimension-aware noise schedule and joint [CLS]-patch modeling. On ImageNet 256{times}256, RiT attains FID 1.45 without guidance and 1.14 with classifier-free guidance, outperforming DiT^DH-XL with 19% fewer parameters (676M vs.\ 839M). The resulting ODE is efficiently solvable at coarse discretizations: with classifier-free guidance, 5 Heun steps already reach FID 2.0 and 10 steps reach 1.25, without distillation or consistency training. Code at https://github.com/lezhang7/RiT.

Though Rectified Flows (ReFlows) with distillation offers a promising way for fast sampling, its fast inversion transforms images back to structured noise for recovery and following editing remains unsolved. This paper introduces FireFlow, a simple yet effective zero-shot approach that inherits the startling capacity of ReFlow-based models (such as FLUX) in generation while extending its capabilities to accurate inversion and editing in 8 steps. We first demonstrate that a carefully designed numerical solver is pivotal for ReFlow inversion, enabling accurate inversion and reconstruction with the precision of a second-order solver while maintaining the practical efficiency of a first-order Euler method. This solver achieves a 3times runtime speedup compared to state-of-the-art ReFlow inversion and editing techniques, while delivering smaller reconstruction errors and superior editing results in a training-free mode. The code is available at https://github.com/HolmesShuan/FireFlow{this URL}.

Aligning text-to-image flow matching models with human preferences via direct reward backpropagation is sample-efficient but hampered by two well-known pathologies: activations cannot be stored across the full sampling trajectory at modern model scale, and chained Jacobian products across steps inflate the reward gradient as it travels back to early indices. Connector-based methods, such as LeapAlign, address these issues by replacing the full backward trajectory with a short pinned path, highlighting a useful decoupling between sampling and optimization. However, the quality of the resulting gradient depends on how accurately this short path approximates the full rollout, especially over long intervals. We propose FlowBP, a unified surrogate-trajectory framework that treats the backward trajectory itself as the design object. FlowBP keeps a no-gradient cached rollout for sampling, then builds a lightweight backward surrogate from cached and selectively re-forwarded velocities. This view separates four choices: the reward-model input, active set, integration weights, and bridge coupling, and recovers prior direct-gradient methods as particular settings. Within this framework, we instantiate three variants: FlowBP-Sparse uses sparse Euler reconstruction, FlowBP-Bridge adds controlled bridge coupling, and FlowBP-Lagrange raises the order of leap quadrature. All three bound memory by the active-set size and limit gradient chaining to at most one Jacobian factor. Across SD3.5-M, FLUX.1-dev, and FLUX.2-Klein-base on preference, quality, and compositional metrics, the three variants improve over direct-gradient baselines on most metrics.

Existing Flow Matching (FM) text-to-image models suffer from two critical bottlenecks under multi-task alignment: the reward sparsity induced by scalar-valued rewards, and the gradient interference arising from jointly optimizing heterogeneous objectives, which together give rise to a 'seesaw effect' of competing metrics and pervasive reward hacking. Inspired by the success of On-Policy Distillation (OPD) in the large language model community, we propose Flow-OPD, the first unified post-training framework that integrates on-policy distillation into Flow Matching models. Flow-OPD adopts a two-stage alignment strategy: it first cultivates domain-specialized teacher models via single-reward GRPO fine-tuning, allowing each expert to reach its performance ceiling in isolation; it then establishes a robust initial policy through a Flow-based Cold-Start scheme and seamlessly consolidates heterogeneous expertise into a single student via a three-step orchestration of on-policy sampling, task-routing labeling, and dense trajectory-level supervision. We further introduce Manifold Anchor Regularization (MAR), which leverages a task-agnostic teacher to provide full-data supervision that anchors generation to a high-quality manifold, effectively mitigating the aesthetic degradation commonly observed in purely RL-driven alignment. Built upon Stable Diffusion 3.5 Medium, Flow-OPD raises the GenEval score from 63 to 92 and the OCR accuracy from 59 to 94, yielding an overall improvement of roughly 10 points over vanilla GRPO, while preserving image fidelity and human-preference alignment and exhibiting an emergent 'teacher-surpassing' effect. These results establish Flow-OPD as a scalable alignment paradigm for building generalist text-to-image models.

Flow matching models (FMs) have revolutionized text-to-image (T2I) generation, with reinforcement learning (RL) serving as a critical post-training strategy for alignment with reward objectives. In this research, we show that current RL pipelines for FMs suffer from two underappreciated yet important limitations: sample inefficiency due to insufficient generation diversity, and pronounced prompt overfitting, where models memorize specific training formulations and exhibit dramatic performance collapse when evaluated on semantically equivalent but stylistically varied prompts. We present PromptRL (Prompt Matters in RL for Flow-Based Image Generation), a framework that incorporates language models (LMs) as trainable prompt refinement agents directly within the flow-based RL optimization loop. This design yields two complementary benefits: rapid development of sophisticated prompt rewriting capabilities and, critically, a synergistic training regime that reshapes the optimization dynamics. PromptRL achieves state-of-the-art performance across multiple benchmarks, obtaining scores of 0.97 on GenEval, 0.98 on OCR accuracy, and 24.05 on PickScore. Furthermore, we validate the effectiveness of our RL approach on large-scale image editing models, improving the EditReward of FLUX.1-Kontext from 1.19 to 1.43 with only 0.06 million rollouts, surpassing Gemini 2.5 Flash Image (also known as Nano Banana), which scores 1.37, and achieving comparable performance with ReasonNet (1.44), which relied on fine-grained data annotations along with a complex multi-stage training. Our extensive experiments empirically demonstrate that PromptRL consistently achieves higher performance ceilings while requiring over 2times fewer rollouts compared to naive flow-only RL. Our code is available at https://github.com/G-U-N/UniRL.

A hallmark of modern large-scale machine learning techniques is the use of training objectives that provide dense supervision to intermediate computations, such as teacher forcing the next token in language models or denoising step-by-step in diffusion models. This enables models to learn complex functions in a generalizable manner. Motivated by this observation, we investigate the benefits of iterative computation for temporal difference (TD) methods in reinforcement learning (RL). Typically they represent value functions in a monolithic fashion, without iterative compute. We introduce floq (flow-matching Q-functions), an approach that parameterizes the Q-function using a velocity field and trains it using techniques from flow-matching, typically used in generative modeling. This velocity field underneath the flow is trained using a TD-learning objective, which bootstraps from values produced by a target velocity field, computed by running multiple steps of numerical integration. Crucially, floq allows for more fine-grained control and scaling of the Q-function capacity than monolithic architectures, by appropriately setting the number of integration steps. Across a suite of challenging offline RL benchmarks and online fine-tuning tasks, floq improves performance by nearly 1.8x. floq scales capacity far better than standard TD-learning architectures, highlighting the potential of iterative computation for value learning.

Flow matching over carefully designed latent representations has recently emerged as a powerful paradigm for topology-aware mesh generation. Existing approaches, however, model vertices and connectivity jointly in a joint latent space, entangling continuous vertex geometry with discrete combinatorial structure; this complicates flow learning and manifests as drifting vertices and broken surfaces. We present LATO.2, a factorized flow matching framework that decomposes mesh generation into a vertex flow followed by a connectivity flow conditioned on the realized vertices, with both stages anchored to a shared coarse voxel scaffold. Dedicated VAEs underpin the two stages, recovering vertices at sub-voxel precision and embedding discrete connectivity into a continuous latent space. We demonstrate two advantages unique to this factorization: (i) part-wise generation, in which the scaffold is partitioned and each part synthesized at full latent capacity, yielding substantially higher-resolution meshes than a monolithic latent permits; and (ii) topology-adaptive editing, in which manipulating first-stage vertices induces the corresponding connectivity without re-optimization. Experiments show that LATO.2 surpasses state-of-the-art topology-aware mesh generators in geometric fidelity and connectivity quality.

Flow Matching models have demonstrated strong performance across a wide range of generative tasks. However, their reliance on ODE-based iterative sampling incurs substantial computational overhead in inference, which limits their applicability in real-time scenes. While distillation is a promising solution, existing approaches largely borrow from diffusion-based score matching, often failing to exploit the intrinsic geometric structure of flows and suffering from training instability, high variance, and degraded generation quality. In this paper, we propose Mean Flow Distillation (MFD), a novel distillation framework tailored for flow matching models. We theoretically demonstrate that MFD acts as a temporal low-pass filter, effectively suppressing the high-frequency optimization noise inherent in variational score distillation (VSD) while ensuring global trajectory consistency. We further prove the Mean Flow Matching Theorem, establishing that matching expected average velocities is sufficient for strict distribution alignment. Empirically, on challenging tasks of high-dimensional manifolds including 4D occupancy forecasting and text-to-image generation, MFD achieves state-of-the-art performance, enabling high-fidelity single-step generation.

We propose UniDFlow, a unified discrete flow-matching framework for multimodal understanding, generation, and editing. It decouples understanding and generation via task-specific low-rank adapters, avoiding objective interference and representation entanglement, while a novel reference-based multimodal preference alignment optimizes relative outcomes under identical conditioning, improving faithfulness and controllability without large-scale retraining. UniDFlpw achieves SOTA performance across eight benchmarks and exhibits strong zero-shot generalization to tasks including inpainting, in-context image generation, reference-based editing, and compositional generation, despite no explicit task-specific training.

While Flow Matching theoretically guarantees constant-velocity trajectories, we identify a critical breakdown in high-dimensional practice: the Velocity Deficit. We show that the MSE objective systematically underestimates velocity magnitude, causing generated samples to fail to reach the data manifold-a phenomenon we term Integration Lag. To rectify this, we propose Initial Energy Injection, instantiated via two complementary methods: the training-based Magnitude-Aware Flow Matching (MAFM) and the training-free Scale Schedule Corrector (SSC). Both are grounded in our discovery of a crucial asymmetry: velocity contraction causes harmful kinetic stagnation at the trajectory's start, yet acts as a beneficial denoising mechanism at its end. Empirically, SSC yields significant efficiency gains with zero retraining and just one line of code. On ImageNet-1k (256x256), it improves FID by 44.6% (from 13.68 to 7.58) and achieves a 5x speedup, enabling a 50-step generator (FID 7.58) to beat a 250-step baseline (FID 8.65). Furthermore, our methods generalize to Text-to-Image tasks and high-resolution generation, improving FID on MS-COCO by ~22%.

Self-conditioning is a core technique that enhances continuous flow-based language models, where the model learns to denoise generated text by conditioning on its own denoising estimate. While empirically successful, its performance improvements are poorly understood. Moreover, there is growing interest in the use of few-step generators based on flow maps, for which how to leverage self-conditioning is unclear. Here, we show that flow language models with self-conditioning solve a fixed-point iteration that bootstraps the performance of the learned denoiser. We use this viewpoint to formulate fixed-point flows, a two-dimensional class of self-conditioned flows, where the first dimension represents the flow process and the second represents the fixed-point iteration. We show that fixed-point flows define valid flow maps, and show that they can be distilled from self-conditioned flow models by compressing both fixed-point iterations and the flow process, the former with fixed-point distillation and the latter with flow map distillation. Our resulting flow map language model, FMLM^star, outperforms state-of-the-art self-conditioned models and few-step models in one- and few-step generation on OpenWebText. Code is available at https://github.com/Ugness/self-conditioned-fmlm.

Synthetic electrocardiogram generation serves medical AI applications requiring privacy-preserving data sharing and training dataset augmentation. Current diffusion-based methods achieve high generation quality but require hundreds of neural network evaluations during sampling, creating computational bottlenecks for clinical deployment. We propose FlowECG, a flow matching approach that adapts the SSSD-ECG architecture by replacing the iterative diffusion process with continuous flow dynamics. Flow matching learns direct transport paths from noise to data distributions through ordinary differential equation solving. We evaluate our method on the PTB-XL dataset using Dynamic Time Warping, Wasserstein distance, Maximum Mean Discrepancy, and spectral similarity metrics. FlowECG matches SSSD-ECG performance at 200 neural function evaluations, outperforming the baseline on three metrics. The key finding shows that FlowECG maintains generation quality with substantially fewer sampling steps, achieving comparable results with 10-25 evaluations compared to 200 for diffusion methods. This efficiency improvement reduces computational requirements by an order of magnitude while preserving physiologically realistic 12-lead ECG characteristics. The approach enables practical deployment in resource-limited clinical settings where real-time generation or large-scale synthetic data creation is needed.

Formulating optimization problems for industrial applications demands significant manual effort and domain expertise. While Large Language Models (LLMs) show promise in automating this process, evaluating their performance remains difficult due to the absence of robust metrics. Existing solver-based approaches often face inconsistency, infeasibility issues, and high computational costs. To address these issues, we propose ORGEval, a graph-theoretic evaluation framework for assessing LLMs' capabilities in formulating linear and mixed-integer linear programs. ORGEval represents optimization models as graphs, reducing equivalence detection to graph isomorphism testing. We identify and prove a sufficient condition, when the tested graphs are symmetric decomposable (SD), under which the Weisfeiler-Lehman (WL) test is guaranteed to correctly detect isomorphism. Building on this, ORGEval integrates a tailored variant of the WL-test with an SD detection algorithm to evaluate model equivalence. By focusing on structural equivalence rather than instance-level configurations, ORGEval is robust to numerical variations. Experimental results show that our method can successfully detect model equivalence and produce 100\% consistent results across random parameter configurations, while significantly outperforming solver-based methods in runtime, especially on difficult problems. Leveraging ORGEval, we construct the Bench4Opt dataset and benchmark state-of-the-art LLMs on optimization modeling. Our results reveal that although optimization modeling remains challenging for all LLMs, DeepSeek-V3 and Claude-Opus-4 achieve the highest accuracies under direct prompting, outperforming even leading reasoning models.

Combinatorial optimization (CO) problems are often NP-hard and thus out of reach for exact algorithms, making them a tempting domain to apply machine learning methods. The highly structured constraints in these problems can hinder either optimization or sampling directly in the solution space. On the other hand, GFlowNets have recently emerged as a powerful machinery to efficiently sample from composite unnormalized densities sequentially and have the potential to amortize such solution-searching processes in CO, as well as generate diverse solution candidates. In this paper, we design Markov decision processes (MDPs) for different combinatorial problems and propose to train conditional GFlowNets to sample from the solution space. Efficient training techniques are also developed to benefit long-range credit assignment. Through extensive experiments on a variety of different CO tasks with synthetic and realistic data, we demonstrate that GFlowNet policies can efficiently find high-quality solutions.

Diffusion-based unsupervised image registration has been explored for cardiac cine MR, but expensive multi-step inference limits practical use. We propose FlowReg, a flow-matching framework in displacement field space that achieves strong registration in as few as two steps and supports further refinement with more steps. FlowReg uses warmup-reflow training: a single-step network first acts as a teacher, then a student learns to refine from arbitrary intermediate states, removing the need for a pre-trained model as in existing methods. An Initial Guess strategy feeds back the model prediction as the next starting point, improving refinement from step two onward. On ACDC and MM2 across six tasks (including cross-dataset generalization), FlowReg outperforms the state of the art on five tasks (+0.6% mean Dice score on average), with the largest gain in the left ventricle (+1.09%), and reduces LVEF estimation error on all six tasks (-2.58 percentage points), using only 0.7% extra parameters and no segmentation labels. Code is available at https://github.com/mathpluscode/FlowReg.

Neural surrogate solvers of partial differential equations (PDEs) promise dramatic speedups over numerical methods, especially in scenarios requiring many solves. However, current accuracy-based evaluations do not fully consider two central issues: (1) neural solvers incur substantial up-front costs for data generation, training, and tuning; and (2) classical solvers can also generate low-fidelity solutions at a sufficiently low simulation cost. To explicitly account for these realities and fully incorporate end-to-end costs, we propose an evaluation framework centered on breakeven complexity, a metric that counts the forward solves before a learned solver is cost-effective relative to an error-equivalent traditional solver. To evaluate this measure, we apply scaling laws to determine how much training budget to allocate to data generation and discuss how to achieve smooth error-matching in diverse settings. We evaluate the breakeven complexity of multiple neural PDE solvers on three PDEs on 2D periodic domains from APEBench and a novel benchmark of flows past multiple obstacles generated by the GPU-native PyFR code. Among other findings, our results suggest that neural PDE solvers become more effective as problems get harder in terms of cost, dimension, rollout, physics regime (e.g. higher Reynolds number), etc.

Diffusion and flow matching models generate samples by learning time-dependent vector fields whose integration transports noise to data, requiring tens to hundreds of network evaluations at inference. We instead learn the transport map directly. We propose Optimal Transport Neural Flow Matching (OT-NFM), an ODE-free generative framework that parameterizes the flow map with neural flows, enabling true one-step generation with a single forward pass. We show that naive flow-map training suffers from mean collapse, where inconsistent noise-data pairings drive all outputs toward the data mean. We prove that consistent coupling is necessary for non-degenerate learning and address this using optimal transport pairings with scalable minibatch and online coupling strategies. Experiments on synthetic benchmarks and image generation tasks (MNIST and CIFAR-10) demonstrate competitive sample quality while reducing inference to a single network evaluation.

Reconstructing PDE solutions from sparse observations is a core challenge in scientific computing. We present FM4PDE, a flow-matching generative framework that learns the joint distribution of PDE coefficients (or initial states) and solutions (or final states), enabling both forward simulation and inverse recovery with limited paired data. At inference, sampling is guided by a composite loss that enforces agreement with sparse measurements and reduces the PDE residual; we support deterministic, stochastic, and hybrid samplers. We provide error guarantees for these guided procedures. For the deterministic optimizer, a coercivity condition ensures trajectory boundedness and a phase-wise contraction yields logarithmic complexity in the target accuracy. For the stochastic sampler, we introduce adaptive guidance and assume dissipativity of the velocity field to obtain uniform moment bounds independent of the noise-floor parameter. This leads to polynomial-time error bounds, and a matching lower bound shows constant guidance induces an unavoidable positive bias, motivating adaptivity. A hybrid deterministic-stochastic analysis is also provided. Experiments on static and time-dependent benchmark PDEs demonstrate competitive accuracy and faster inference than diffusion-based generative models.

Flow matching generates data by integrating a learned velocity field, where the number of integration steps (NFE) directly determines inference cost. We analyze which properties of the velocity field govern integration error by decomposing the velocity Jacobian into its symmetric part S (strain rate) and antisymmetric part Omega (vorticity). We prove that strain and vorticity play different roles: strain controls exponential error amplification through the logarithmic norm, while vorticity contributes only linearly to the local truncation error. We further show that the optimal transport velocity field is irrotational and has zero material derivative, implying second-order Euler accuracy; for exact displacement interpolation, the associated Lagrangian particle dynamics are integrated exactly by Euler. Motivated by this analysis, we study weighted Jacobian regularization with strain weight alpha and vorticity weight beta. Experiments on 2D synthetic data confirm the main theoretical predictions, showing up to 2.7x lower integration error at NFE=5. Preliminary CIFAR-10 experiments show consistent trends, with a lightweight fine-tuning procedure improving FID by 14 percent at NFE=10 while preserving high-NFE quality.

We present an ultra-efficient post-training method for shortcutting large-scale pre-trained flow matching diffusion models into efficient few-step samplers, enabled by novel velocity field self-distillation. While shortcutting in flow matching, originally introduced by shortcut models, offers flexible trajectory-skipping capabilities, it requires a specialized step-size embedding incompatible with existing models unless retraining from scratchx2013a process nearly as costly as pretraining itself. Our key contribution is thus imparting a more aggressive shortcut mechanism to standard flow matching models (e.g., Flux), leveraging a unique distillation principle that obviates the need for step-size embedding. Working on the velocity field rather than sample space and learning rapidly from self-guided distillation in an online manner, our approach trains efficiently, e.g., producing a 3-step Flux less than one A100 day. Beyond distillation, our method can be incorporated into the pretraining stage itself, yielding models that inherently learn efficient, few-step flows without compromising quality. This capability also enables, to our knowledge, the first few-shot distillation method (e.g., 10 text-image pairs) for dozen-billion-parameter diffusion models, delivering state-of-the-art performance at almost free cost.

Combinatorial optimization problems are ubiquitous in science and engineering. Still, learning-based approaches to accelerate combinatorial optimization often require solving a large number of difficult instances to collect training data, incurring significant computational cost. Existing learning-based methods require training dedicated models for each problem distribution, for each downstream task, severely limiting their scalability and generalization. We introduce Forge: Foundational Optimization Representations from Graph Embeddings, a framework that pre-trains a vector-quantized graph autoencoder on a large, diverse collection of mixed-integer programming (MIP) instances in an unsupervised manner, without relying on optimization solvers or optimal solutions. Vector quantization produces discrete code assignments that serve as a vocabulary for representing optimization instances. We evaluate Forge in both unsupervised and supervised settings. In the unsupervised setting, Forge embeddings effectively cluster unseen instances across problem domains and sizes. In the supervised setting, we fine-tune Forge embeddings and show that a single pre-trained model helps predicting both the integrality gap for cut-generation and variable hints for search guidance across multiple problem and size distributions. In both tasks, we improve the performance of a commercial optimization solver and outperform state-of-the-art learning-based methods. Finally, we open-source our training code, pre-trained Forge weights, and embeddings for multiple MIP distributions to foster further research in representation learning for optimization problems.

Recent LLM-based agents have closed substantial portions of the scientific discovery loop in software-only machine-learning research, in chemistry, and in biology. Extending the same loop to high-fidelity physical simulators is harder, because solver completion does not imply physical validity and many failure modes appear only in field-level imagery rather than in solver logs. We present AI CFD Scientist, an open-source AI scientist for computational fluid dynamics (CFD) that, to our knowledge, is the first to span literature-grounded ideation, validated execution, vision-based physics verification, source-code modification, and figure-grounded writing within a single inspectable workflow. Three coupled pathways cover parameter sweeps within a fixed solver, case-local C++ library compilation for new physical models, and open-ended hypothesis search against a reference comparator, all running on OpenFOAM through Foam-Agent. At the center of the framework is a vision-language physics-verification gate that inspects rendered flow fields before any result is accepted, rerun, or written into a manuscript. On five tasks under a shared GPT-5.5 backbone, AI CFD Scientist autonomously discovers a Spalart-Allmaras runtime correction that reduces lower-wall Cf RMSE against DNS by 7.89% on the periodic hill at Reh=5600; under matched LLM cost, two strong general AI-scientist baselines (ARIS, DeepScientist) execute partial CFD workflows but lack the domain-specific validity gates needed to convert runs into defensible scientific claims; and a controlled planted-failure ablation shows that the vision-language gate detects 14 of 16 silent failures missed by solver-level checks. Code, prompts, and run artifacts are released at https://github.com/csml-rpi/cfd-scientist.