Daily Papers

Legged robots face significant challenges in navigating complex environments, as they require precise real-time decisions for foothold selection and contact planning. While existing research has explored methods to select footholds based on terrain geometry or kinematics, a critical gap remains: few existing methods efficiently validate the existence of a non-collision swing trajectory. This paper addresses this gap by introducing KCFRC, a novel approach for efficient foothold reachability analysis. We first formally define the foothold reachability problem and establish a sufficient condition for foothold reachability. Based on this condition, we develop the KCFRC algorithm, which enables robots to validate foothold reachability in real time. Our experimental results demonstrate that KCFRC achieves remarkable time efficiency, completing foothold reachability checks for a single leg across 900 potential footholds in an average of 2 ms. Furthermore, we show that KCFRC can accelerate trajectory optimization and is particularly beneficial for contact planning in confined spaces, enhancing the adaptability and robustness of legged robots in challenging environments.

Benchmark gains are often treated as evidence of greater LLM capability. Yet the same gain can reflect different changes in model behavior. A model may reach new answers, or produce answers that were already within reach. Aggregate scores do not distinguish these changes question by question. We establish a question-level audit under fixed budgets, temperatures, and answer formats. A question is realized when the default deployment procedure produces the correct answer. A question is reachable when a specified probe finds that answer within a fixed budget. We first test whether inference-time layer routing can expand reachability. Under a matched budget, random routes match or exceed structured search in all 43 model and task settings. Answer-blind procedures retain almost none of this gain, which instead requires access to the correct answer. We then ask why reachable answers sometimes fail to appear. Across six cases spanning 0.5B to 31B, silencing one identified MLP block repairs 68 to 92 percent of a predefined failure set. We next test whether training closes the gap by expanding reachability. In five of six matched evaluations, deployed performance rises while the reachable ceiling remains flat or falls. For DAPO, the deployed score rises by 14.7 points while the reachable ceiling falls by 13.3 points. Across the settings we audit, realization and reachability therefore do not always change together. Claims of capability expansion should report both realized performance and reachability under matched evaluation conditions. Code is available at https://github.com/LiZaiyuan0619/reachability-not-realization

Agent benchmarks often evaluate only final answers even when agents run on stateful runtimes. We argue this under-specifies what is being evaluated: the proper unit is a declared model-plus-runtime configuration whose failures can occur in evidence acquisition, runtime routing, safety boundaries, or repeated execution. We present ClawProBench, a trace-aware benchmark for runtime-native agent evaluation instantiated on OpenClaw, a live agent runtime with workspace tools and native surfaces for browsing, memory, messaging, scheduling, skills, and subagents. ClawProBench defines two tracks: a 102-scenario full profile with live workspace and native-runtime routing tasks, and a frozen 68-scenario holdout with closed-world JSON output contracts for robust ranking. Trials are scored from execution traces via a safety-gated formula combining correctness, process quality, and efficiency, preserving failure evidence for audit. Our anonymous artifact includes benchmark definitions, scoring code, manifests and sanitized traces. We evaluate 68 configurations on the full profile and 37 on holdout. The top safety-gated average trace score is 0.7671. Native-runtime tasks underperform workspace-live tasks (0.5238 vs. 0.6415). On holdout, pass@k-any outperforms strict three-trial pass (0.6638 vs. 0.2890), while full-profile and holdout rankings show weak alignment (Spearman 0.1300). Rankings based purely on correctness differ substantially from process-aware, safety-gated and strict-pass views. Final-answer leaderboards may hide native-surface weaknesses, one-off successes and trace-local agent failure modes.

Time-Optimal Path Parameterization (TOPP) is a well-studied problem in robotics and has a wide range of applications. There are two main families of methods to address TOPP: Numerical Integration (NI) and Convex Optimization (CO). NI-based methods are fast but difficult to implement and suffer from robustness issues, while CO-based approaches are more robust but at the same time significantly slower. Here we propose a new approach to TOPP based on Reachability Analysis (RA). The key insight is to recursively compute reachable and controllable sets at discretized positions on the path by solving small Linear Programs (LPs). The resulting algorithm is faster than NI-based methods and as robust as CO-based ones (100% success rate), as confirmed by extensive numerical evaluations. Moreover, the proposed approach offers unique additional benefits: Admissible Velocity Propagation and robustness to parametric uncertainty can be derived from it in a simple and natural way.

Deploying foundation models in embodied edge systems is fundamentally a systems problem, not just a problem of model compression. Real-time control must operate within strict size, weight, and power constraints, where memory traffic, compute latency, timing variability, and safety margins interact directly. The Deployment Gauntlet organizes these constraints into eight coupled barriers that determine whether embodied foundation models can run reliably in practice. Across representative edge workloads, autoregressive Vision-Language-Action policies are constrained primarily by memory bandwidth, whereas diffusion-based controllers are limited more by compute latency and sustained execution cost. Reliable deployment therefore depends on system-level co-design across memory, scheduling, communication, and model architecture, including decompositions that separate fast control from slower semantic reasoning.

Interactive agent benchmarks face a tension between scalable construction and realistic workflow evaluation. Hand-authored tasks are expensive to extend and revise, while static prompt evaluation misses failures that only appear when agents operate over persistent state. Existing interactive benchmarks have advanced agent evaluation significantly, but most initialize tasks from clean state and do not systematically test how agents handle pre-existing partial, stale, or conflicting artifacts. We present ClawForge, a generator-backed benchmark framework for executable command-line workflows under state conflict. The framework compiles scenario templates, grounded slots, initialized state, reference trajectories, and validators into reproducible task specifications, and evaluates agents step by step over persistent workflow surfaces using normalized end state and observable side effects rather than exact trajectory matching. We instantiate this framework as the ClawForge-Bench (17 scenarios, 6 ability categories). Results across seven frontier models show that the best model reaches only 45.3% strict accuracy, wrong-state replacement remains below 17\% for all models, and the widest model separation (17% to 90%) is driven by whether agents inspect existing state before acting. Partial-credit and step-efficiency analyses further reveal that many failures are near-miss closures rather than early breakdowns, and that models exhibit qualitatively different failure styles under state conflict.

Large language models (LLMs) have demonstrated the potential to perform high-level planning. Yet, it remains a challenge for LLMs to comprehend low-level commands, such as joint angle targets or motor torques. This paper proposes an approach to use foot contact patterns as an interface that bridges human commands in natural language and a locomotion controller that outputs these low-level commands. This results in an interactive system for quadrupedal robots that allows the users to craft diverse locomotion behaviors flexibly. We contribute an LLM prompt design, a reward function, and a method to expose the controller to the feasible distribution of contact patterns. The results are a controller capable of achieving diverse locomotion patterns that can be transferred to real robot hardware. Compared with other design choices, the proposed approach enjoys more than 50% success rate in predicting the correct contact patterns and can solve 10 more tasks out of a total of 30 tasks. Our project site is: https://saytap.github.io.

In this study, we introduce FEET, a standardized protocol designed to guide the development and benchmarking of foundation models. While numerous benchmark datasets exist for evaluating these models, we propose a structured evaluation protocol across three distinct scenarios to gain a comprehensive understanding of their practical performance. We define three primary use cases: frozen embeddings, few-shot embeddings, and fully fine-tuned embeddings. Each scenario is detailed and illustrated through two case studies: one in sentiment analysis and another in the medical domain, demonstrating how these evaluations provide a thorough assessment of foundation models' effectiveness in research applications. We recommend this protocol as a standard for future research aimed at advancing representation learning models.

Safety claims on self-improving agent runtimes are almost always self-graded: a policy file, a guardrail, or a README commitment. We describe falsifiable release gates, and a methodology to build and validate such systems, such that every new capability must pass a pre-specified, machine-verifiable acceptance suite before it ships, and a fixed set of standing invariants is preserved at each gate. I think we applied the method in the Antahkarana, an open runtime, via seven gates from basic observability into a self governing loop that suggests changes to its own policy. no action goes to an effector without a safety-critical property capability token minted by a control ring is exhaustively machine-checked over the one million recorded reachable state space of a bounded model and re-checked against execution traces. A purposely broken model gives the shortest counterexample, so the checker has teeth, is apparent. The self-enhancement loop is positively Constrained: the entire write surface is policy rules, tightening changes. may auto-apply loosening changes always require a human merge and a proposal autoclosed is one that mispredicts its own effect; We publish the acceptance measured results for all the seven gates, define precisely the scope of each claim (a bounded of the coordination skeleton (not the learned components) and free the runtime, either command line tools and the gate suite, so the results reproduce, and gates can run against other agent frameworks. Reviewers may repeat the single command central non-bypass in seconds.

Physical AI systems increasingly map multimodal observations, language instructions, and learned world representations into physically consequential actions. Robotics foundation models, vision-language-action models, and world-model-based autonomous systems can condition decisions that move vehicles, robots, drones, and industrial machines. This transition exposes a safety problem that is not fully captured by conventional AI content moderation or by classical robot safety alone: a black-box model may issue a physically consequential action while appearing confident, plausible, and semantically aligned. The resulting failure can be silent, arising from sensor drift, occlusion, state-estimation error, distribution shift, hallucinated affordances, or invalid physical assumptions before downstream hardware controllers detect a violation. Across embodied foundation models, world models, robotics simulation, embodied safety benchmarks, safe control, runtime assurance, uncertainty estimation, verification, and guardrail evaluation, model capability and safety mechanisms have advanced along largely separate technical tracks. A recurring gap synthesized here is that no single stream surveyed in this review supplies a complete runtime authorization boundary between black-box Physical AI models and physical execution. The resulting analysis develops a bounded problem formulation, a definition of silent physical-action failure, a taxonomy of runtime guardrail functions, and evaluation requirements for comparing guardrails as Physical AI assurance mechanisms.

The vulnerability of artificial intelligence (AI) and machine learning (ML) against adversarial disturbances and attacks significantly restricts their applicability in safety-critical systems including cyber-physical systems (CPS) equipped with neural network components at various stages of sensing and control. This paper addresses the reachable set estimation and safety verification problems for dynamical systems embedded with neural network components serving as feedback controllers. The closed-loop system can be abstracted in the form of a continuous-time sampled-data system under the control of a neural network controller. First, a novel reachable set computation method in adaptation to simulations generated out of neural networks is developed. The reachability analysis of a class of feedforward neural networks called multilayer perceptrons (MLP) with general activation functions is performed in the framework of interval arithmetic. Then, in combination with reachability methods developed for various dynamical system classes modeled by ordinary differential equations, a recursive algorithm is developed for over-approximating the reachable set of the closed-loop system. The safety verification for neural network control systems can be performed by examining the emptiness of the intersection between the over-approximation of reachable sets and unsafe sets. The effectiveness of the proposed approach has been validated with evaluations on a robotic arm model and an adaptive cruise control system.

Foundation-model policies for robotic manipulation are advancing rapidly on task success, but rigorous evaluation of whether they succeed safely is still lacking. We introduce ManiGuard, a specification-grounded framework for evaluating and improving the safety of foundation-model manipulation, comprising the ManiGuard-Bench task suite and a paired safety-annotated trajectory-generation pipeline. ManiGuard-Bench organizes six contact-rich household task families into 200 locked base tasks along a skill times constraint taxonomy, with safety specified independently of task success. Each task is evaluated under one in-distribution and four single-axis out-of-distribution perturbations that hold the safety specification fixed, giving 1,000 locked scenarios. Every rollout is runtime-checked by LTL_f-grounded automaton monitors over physics-grounded predicates rather than learned classifiers or LLM judges, in simulation and on a physical Franka platform. The pipeline pairs an automated motion-planning generator with human teleoperation, annotated by the same per-step monitor, and directly supports safety-aware fine-tuning; we release 8,000 safety-annotated demonstrations, 40 per base task. Benchmarking zero-shot and fine-tuned VLAs across more than 23,000 rollouts, we find: (i) safety must be evaluated independently of task success, as 6-21% of successful rollouts violate the specification; (ii) fine-tuning on our suite raises safe task completion from near zero to 7.5-29.8% and engaged-and-safe behavior from 16-40% to 51-72%; but (iii) a gap remains that scaling demonstrations does not close, with 21-42% of engaged rollouts still violating, two of six families below 2% safe success for every policy, and these failures persisting under distribution shift and on hardware.

Traversability analysis is a fundamental capability for autonomous mobile robots operating in unstructured environments. While modern machine learning approaches such as deep neural networks and gradient-boosted trees achieve strong predictive performance, they lack interpretability and provide limited insight into the underlying terrain-robot interaction dynamics. In this paper, we propose TravKAN, a Kolmogorov-Arnold Network-based framework for fast, scalable, and interpretable traversability estimation. TravKAN represents multivariate decision functions through compositions of learnable univariate functions, enabling compact architectures and symbolic extraction of analytic expressions after training. In addition, we introduce a novel set of handcrafted features derived from the reflectivity channel of LiDAR sensors. To the best of our knowledge, reflectivity has not been systematically exploited for handcrafted traversability descriptors, despite its potential to capture material and surface properties complementary to geometric cues. We evaluate TravKAN on public, real-world urban and off-road datasets and compare it against strong baselines. TravKAN achieves strong performance across all metrics, outperforming conventional deep models and approaching the performance of XGBoost. TravKAN-Lite, i.e., TravKAN's symbolic representation, reveals meaningful nonlinear feature interactions and provides a compact, deployment-friendly, and fast analytic model. Ablation studies further show the robustness of our method to architectural variations and quantify the contribution of the proposed reflectivity-based features. These properties make TravKAN attractive for robotic systems requiring transparency, real-time computational efficiency, and interpretability in safety-critical decision-making.

In this paper, we present the findings of our Project ALPINE which stands for ``Autoregressive Learning for Planning In NEtworks." Project ALPINE initiates a theoretical investigation into the development of planning capabilities in Transformer-based language models through their autoregressive learning mechanisms, aiming to identify any potential limitations in their planning abilities. We abstract planning as a network path-finding task where the objective is to generate a valid path from a specified source node to a designated target node. In terms of expressiveness, we show that the Transformer is capable of executing path-finding by embedding the adjacency and reachability matrices within its weights. Our theoretical analysis of the gradient-based learning dynamic of the Transformer reveals that the Transformer is capable of learning both the adjacency matrix and a limited form of the reachability matrix. These theoretical insights are then validated through experiments, which demonstrate that the Transformer indeed learns the adjacency matrix and an incomplete reachability matrix, which aligns with the predictions made in our theoretical analysis. Additionally, when applying our methodology to a real-world planning benchmark, called Blocksworld, our observations remain consistent. Our theoretical and empirical analyses further unveil a potential limitation of Transformer in path-finding: it cannot identify reachability relationships through transitivity, and thus would fail when path concatenation is needed to generate a path. In summary, our findings shed new light on how the internal mechanisms of autoregressive learning enable planning in networks. This study may contribute to our understanding of the general planning capabilities in other related domains.

Safety heads are lightweight classifiers attached to pretrained language models for flagging harmful inputs before generation. Their empirical detection performance has been studied, but their formal robustness properties remain largely unexplored. We ask when a State Space Model (SSM)-based safety head can be certified to produce the same prediction for all inputs within a bounded embedding-space perturbation. We prove that the answer turns on a single condition: the l_infty norm of the state transition matrix must satisfy A_infty<1 (the contraction condition), which enables exact interval bound propagation (IBP) certification for linear time-invariant classifiers. When the contraction condition holds, the reachable output interval has bounded steady-state width and examples can be certified as robustly classified. When it fails, the interval grows exponentially with sequence length and certification is impossible at any practical perturbation radius. We enforce contraction with a hinge penalty and show on toxic comment data that certified fraction improves from 41\% to 59\%, with a sharp empirical phase transition at A_infty=1 matching the theory. Applying a contraction-regularized S4 head to jailbreak detection on JailbreakBench, we achieve a zero-shot transfer to AdvBench (DR=0.994) and HarmBench (DR=0.988). A logistic regression on mean-pooled Mamba-130M embeddings matches or exceeds the S4 head on every detection metric, confirming that harmful intent is already linearly separable in the embedding space. The S4 safety head's contribution is not superior discrimination but the formal certification that no probe-based approach provides.

Animals have evolved various agile locomotion strategies, such as sprinting, leaping, and jumping. There is a growing interest in developing legged robots that move like their biological counterparts and show various agile skills to navigate complex environments quickly. Despite the interest, the field lacks systematic benchmarks to measure the performance of control policies and hardware in agility. We introduce the Barkour benchmark, an obstacle course to quantify agility for legged robots. Inspired by dog agility competitions, it consists of diverse obstacles and a time based scoring mechanism. This encourages researchers to develop controllers that not only move fast, but do so in a controllable and versatile way. To set strong baselines, we present two methods for tackling the benchmark. In the first approach, we train specialist locomotion skills using on-policy reinforcement learning methods and combine them with a high-level navigation controller. In the second approach, we distill the specialist skills into a Transformer-based generalist locomotion policy, named Locomotion-Transformer, that can handle various terrains and adjust the robot's gait based on the perceived environment and robot states. Using a custom-built quadruped robot, we demonstrate that our method can complete the course at half the speed of a dog. We hope that our work represents a step towards creating controllers that enable robots to reach animal-level agility.

Many stages of the robotic lifecycle, from morphology synthesis to operation, rely fundamentally on the reachable workspace. However, current methods for approximating workspaces are slow, imprecise, or tied to a single morphology. We introduce Reachability Across Morphologies (RAM): a morphology-conditioned, implicit neural representation that acts as a fast, differentiable surrogate for pose reachability, generalising to unseen morphologies while inherently accounting for self-collisions. To train RAM, we publish a large-scale dataset of 3cdot10^{10} samples generated solely from forward kinematics. Experiments show that our model achieves an F_1-score of 86% at nanosecond inference, outperforming the baseline by 14% while reducing inference time by three orders of magnitude. We further demonstrate speed-ups of one and two orders of magnitude for gradient-based morphology and trajectory optimisation, respectively. Website: https://timwalter.github.io/ram.

The deployment of Large Language Models (LLMs) in robotic systems presents unique safety challenges, particularly in unpredictable environments. Although LLMs, leveraging zero-shot learning, enhance human-robot interaction and decision-making capabilities, their inherent probabilistic nature and lack of formal guarantees raise significant concerns for safety-critical applications. Traditional model-based verification approaches often rely on precise system models, which are difficult to obtain for real-world robotic systems and may not be fully trusted due to modeling inaccuracies, unmodeled dynamics, or environmental uncertainties. To address these challenges, this paper introduces a safety assurance framework for LLM-controlled robots based on data-driven reachability analysis, a formal verification technique that ensures all possible system trajectories remain within safe operational limits. Our framework specifically investigates the problem of instructing an LLM to navigate the robot to a specified goal and assesses its ability to generate low-level control actions that successfully guide the robot safely toward that goal. By leveraging historical data to construct reachable sets of states for the robot-LLM system, our approach provides rigorous safety guarantees against unsafe behaviors without relying on explicit analytical models. We validate the framework through experimental case studies in autonomous navigation and task planning, demonstrating its effectiveness in mitigating risks associated with LLM-generated commands. This work advances the integration of formal methods into LLM-based robotics, offering a principled and practical approach to ensuring safety in next-generation autonomous systems.

State density distribution, in contrast to worst-case reachability, can be leveraged for safety-related problems to better quantify the likelihood of the risk for potentially hazardous situations. In this work, we propose a data-driven method to compute the density distribution of reachable states for nonlinear and even black-box systems. Our semi-supervised approach learns system dynamics and the state density jointly from trajectory data, guided by the fact that the state density evolution follows the Liouville partial differential equation. With the help of neural network reachability tools, our approach can estimate the set of all possible future states as well as their density. Moreover, we could perform online safety verification with probability ranges for unsafe behaviors to occur. We use an extensive set of experiments to show that our learned solution can produce a much more accurate estimate on density distribution, and can quantify risks less conservatively and flexibly comparing with worst-case analysis.

LLM-based code agents navigate repositories through keyword search but miss the structural relationships, such as call graphs, inheritance hierarchies, and configuration dependencies, that define how software actually works. This makes agent navigation stochastic and difficult to reproduce across runs. We investigate whether lightweight static analysis can provide deterministic anchors for these agents: stable structural facts injected as plain-text comments that constrain probabilistic exploration and make navigation more predictable. Starting from a strong baseline, Codex from OpenAI, we systematically inject varying granularities of structural annotations and measure their effects on localization, trajectory behavior, and run-to-run stability. Our study identifies what we call the deterministic anchoring effect: static structure helps less by making agents "smarter" and more by making their navigation disciplined and reproducible. Three observations support this finding: (1) Anchoring works: lightweight call/inheritance topology improves function-level localization (+2.2pp Func@5) and shortens trajectories (-1.6 interaction rounds); (2) Anchoring is scale-sensitive: the optimal granularity and directionality depend on repository characteristics, where denser semantics show diminishing returns and hub-heavy projects benefit from inverse-only links that expose "who-calls-me" without forward edges; (3) Anchoring stabilizes: tags raise link-following rate from 0.15-0.18 to 0.21-0.24, roughly halve run-to-run variance, and improve single-run reliability (Pass@1 +3.4 pp) on medium-scale repositories, at the cost of roughly 10% more input tokens. These observations suggest practical guidelines: default to lightweight topology on medium projects, prune forward edges in large repositories, and reserve dense tags for implicit-dependency cases.

Prompt engineering is crucial for deploying LLMs but is poorly understood mathematically. We formalize LLM systems as a class of discrete stochastic dynamical systems to explore prompt engineering through the lens of control theory. We investigate the reachable set of output token sequences R_y(mathbf x_0) for which there exists a control input sequence mathbf u for each mathbf y in R_y(mathbf x_0) that steers the LLM to output mathbf y from initial state sequence mathbf x_0. We offer analytic analysis on the limitations on the controllability of self-attention in terms of reachable set, where we prove an upper bound on the reachable set of outputs R_y(mathbf x_0) as a function of the singular values of the parameter matrices. We present complementary empirical analysis on the controllability of a panel of LLMs, including Falcon-7b, Llama-7b, and Falcon-40b. Our results demonstrate a lower bound on the reachable set of outputs R_y(mathbf x_0) w.r.t. initial state sequences mathbf x_0 sampled from the Wikitext dataset. We find that the correct next Wikitext token following sequence mathbf x_0 is reachable over 97% of the time with prompts of kleq 10 tokens. We also establish that the top 75 most likely next tokens, as estimated by the LLM itself, are reachable at least 85% of the time with prompts of kleq 10 tokens. Intriguingly, short prompt sequences can dramatically alter the likelihood of specific outputs, even making the least likely tokens become the most likely ones. This control-centric analysis of LLMs demonstrates the significant and poorly understood role of input sequences in steering output probabilities, offering a foundational perspective for enhancing language model system capabilities.

Interactive driving exposes a failure mode that is easy to miss in rule-aware autonomous-driving stacks: a hard-rule margin can be negative for an ego candidate even though a small lawful accommodation by a non-priority agent would restore feasibility. Existing rulebooks, shields, and reachability filters are strong at vetoing unsafe actions, while prediction-based planners model likely responses. Neither returns a runtime proof object that states which bounded multi-agent edit repairs the maneuver, who owns the edit, whether the request is right-of-way affordable, and what ego fallback remains if the request is not observed. We formulate this missing object as *interactive repair certification* and introduce *CARVE*, a prediction-free certificate layer over a finite lattice of ego-owned and agent-owned tactical operators. Agent-owned requests are admissible only inside \(B_j(s) = β(π_j)α_j^{\max}(s)\), a cooperation envelope that separates kinematic reachability from normative priority. The resulting certificate records the binding rule, repair category, repair set, responsibility-weighted cost split, and fallback. On 589 Lanelet2-geometry-grounded INTERACTION replay episodes, CARVE-Greedy accepts 98.64% of initially vetoed maneuvers and recovers 370/378 human-resolved false vetoes, while preserving 589/589 right-of-way respect, zero priority-agent false positives, and 400/400 negative-stress vetoes. We prove certificate soundness, structural right-of-way respect, exact finite-lattice minimality, fallback contingency, and blame-consistency conditions. CARVE does not predict or require another driver's compliance; it certifies whether a proposed interaction is bounded, attributable, and normatively admissible under declared assumptions.

A safe action is not necessarily a viable one. A frozen vision-language-action (VLA) policy can favor a locally admissible move that leaves no policy-supported route to safe task completion. We call this the feasibility-likelihood gap: likelihood ranks the next move, while feasibility depends on the futures it leaves open. To bring those futures into the decision, we derive the exact next-block marginal of the history-conditioned policy-environment trajectory law restricted to safe task completion. The derivation reveals a candidate-dependent feasible-future mass: its support records whether safe completion remains possible under the frozen continuation process, while its magnitude measures how much weighted safe-completion mass remains. Since exact evaluation is impractical online, we develop a selective finite-candidate approximation and establish conditions for recovering the best retained viable candidate. Our alarm-triggered, training-free reranker VICS-G lowers mean cumulative safety cost by 1.9%-57.5% across six Safety-CHORES settings while remaining within 2.5 percentage points of policy sampling in success and 0.82 steps in mean episode length. Our approach offers a promising and practical path toward safer task completion, grounded in an exact policy-relative target yet requiring neither policy retraining nor online rollouts.

This paper presents a safety-critical approach to the coordination of robots in dynamic environments. To this end, we leverage control barrier functions (CBFs) with the forward reachable set to guarantee the safe coordination of the robots while preserving a desired trajectory via a layered controller. The top-level planner generates a safety-ensured trajectory for each agent, accounting for the dynamic constraints in the environment. This planner leverages high-order CBFs based on the forward reachable set to ensure safety-critical coordination control, i.e., guarantee the safe coordination of the robots during locomotion. The middle-level trajectory planner employs single rigid body (SRB) dynamics to generate optimal ground reaction forces (GRFs) to track the safety-ensured trajectories from the top-level planner. The whole-body motions to adhere to the optimal GRFs while ensuring the friction cone condition at the end of each stance leg are generated from the low-level controller. The effectiveness of the approach is demonstrated through simulation and hardware experiments.

Humanoid parkour policies can traverse various terrains, but task completion may mask challenges of harsh landings, edge contacts, and unstable stance contacts. Humans naturally regulate foot-terrain interaction through tactile feedback, modulating contact compliance according to terrain stiffness. This highlights a key domain gap between humans and humanoid robots: the absence of rich tactile sensing in most humanoid systems. We address this problem with TactileStep, a deployable tactile learning framework that brings sole pressure sensing into humanoid locomotion control for softer touchdowns and more stable support. TactileStep aligns tactile simulation with the real pressure insole, allowing the policy to learn from the same contact features available on hardware. During training, we use tactile and motion cues to recognize different foot-contact phases and apply phase-aware rewards that encourage safer landing and more stable stance. Evaluated in simulation and on a Unitree G1 humanoid across diverse terrains, TactileStep reduces peak touchdown force by up to 48.8% and peak A-weighted impact noise by up to 30.1 dB over a strong perceptive baseline, while increasing stance contact area by up to 23.8%.

Foot contact plays a critical role in human interaction with the world, and thus exploring foot contact can advance our understanding of human movement and physical interaction. Despite its importance, existing methods often approximate foot contact using a zero-velocity constraint and focus on joint-level contact, failing to capture the detailed interaction between the foot and the world. Dense estimation of foot contact is crucial for accurately modeling this interaction, yet predicting dense foot contact from a single RGB image remains largely underexplored. There are two main challenges for learning dense foot contact estimation. First, shoes exhibit highly diverse appearances, making it difficult for models to generalize across different styles. Second, ground often has a monotonous appearance, making it difficult to extract informative features. To tackle these issues, we present a FEet COntact estimation (FECO) framework that learns dense foot contact with shoe style-invariant and ground-aware learning. To overcome the challenge of shoe appearance diversity, our approach incorporates shoe style adversarial training that enforces shoe style-invariant features for contact estimation. To effectively utilize ground information, we introduce a ground feature extractor that captures ground properties based on spatial context. As a result, our proposed method achieves robust foot contact estimation regardless of shoe appearance and effectively leverages ground information. Code will be released.

Density of the reachable states can help understand the risk of safety-critical systems, especially in situations when worst-case reachability is too conservative. Recent work provides a data-driven approach to compute the density distribution of autonomous systems' forward reachable states online. In this paper, we study the use of such approach in combination with model predictive control for verifiable safe path planning under uncertainties. We first use the learned density distribution to compute the risk of collision online. If such risk exceeds the acceptable threshold, our method will plan for a new path around the previous trajectory, with the risk of collision below the threshold. Our method is well-suited to handle systems with uncertainties and complicated dynamics as our data-driven approach does not need an analytical form of the systems' dynamics and can estimate forward state density with an arbitrary initial distribution of uncertainties. We design two challenging scenarios (autonomous driving and hovercraft control) for safe motion planning in environments with obstacles under system uncertainties. We first show that our density estimation approach can reach a similar accuracy as the Monte-Carlo-based method while using only 0.01X training samples. By leveraging the estimated risk, our algorithm achieves the highest success rate in goal reaching when enforcing the safety rate above 0.99.

Learning-rate steps are usually treated as hyperparameters. This paper isolates a local beliefspace calculation: when an update is modeled as a projected forward step on the probability simplex, admissibility means contractivity in the natural KL/Bregman geometry. Under this model, the upper bound of an admissible step is not a tuning slogan but a formula.

Existing tool-use benchmarks for LLM agents are overwhelmingly linear: our analysis of six benchmarks shows 55 to 100% of instances are simple chains of 2 to 5 steps. We introduce The Amazing Agent Race (AAR), a benchmark featuring directed acyclic graph (DAG) puzzles (or "legs") with fork-merge tool chains. We release 1,400 instances across two variants: sequential (800 legs) and compositional (600 DAG legs). Agents must navigate Wikipedia, execute multi-step tool chains, and aggregate results into a verifiable answer. Legs are procedurally generated from Wikipedia seeds across four difficulty levels with live-API validation. Three complementary metrics (finish-line accuracy, pit-stop visit rate, and roadblock completion rate) separately diagnose navigation, tool-use, and arithmetic failures. Evaluating three agent frameworks on 1,400 legs, the best achieves only 37.2% accuracy. Navigation errors dominate (27 to 52% of trials) while tool-use errors remain below 17%, and agent architecture matters as much as model scale (Claude Code matches Codex CLI at 37% with 6x fewer tokens). The compositional structure of AAR reveals that agents fail not at calling tools but at navigating to the right pages, a blind spot invisible to linear benchmarks. The project page can be accessed at: https://minnesotanlp.github.io/the-amazing-agent-race

Large language models are increasingly deployed as autonomous agents executing multi-step workflows in real-world software environments. However, existing agent benchmarks suffer from three critical limitations: (1) trajectory-opaque grading that checks only final outputs, (2) underspecified safety and robustness evaluation, and (3) narrow modality coverage and interaction paradigms. We introduce Claw-Eval, an end-to-end evaluation suite addressing all three gaps. It comprises 300 human-verified tasks spanning 9 categories across three groups (general service orchestration, multimodal perception and generation, and multi-turn professional dialogue). Every agent action is recorded through three independent evidence channels (execution traces, audit logs, and environment snapshots), enabling trajectory-aware grading over 2,159 fine-grained rubric items. The scoring protocol evaluates Completion, Safety, and Robustness, reporting Average Score, Pass@k, and Pass^k across three trials to distinguish genuine capability from lucky outcomes. Experiments on 14 frontier models reveal that: (1) trajectory-opaque evaluation is systematically unreliable, missing 44% of safety violations and 13% of robustness failures that our hybrid pipeline catches; (2) controlled error injection primarily degrades consistency rather than peak capability, with Pass^3 dropping up to 24% while Pass@3 remains stable; (3) multimodal performance varies sharply, with most models performing poorer on video than on document or image, and no single model dominating across all modalities. Beyond benchmarking, Claw-Eval highlights actionable directions for agent development, shedding light on what it takes to build agents that are not only capable but reliably deployable.

Evaluating Computer Use Agents (CUAs) on interactive environments is fraught with methodological pitfalls that the field has yet to systematically address. We show that a 1MB replay script that blindly executes a recorded action sequence without ever observing the screen outperforms frontier models on prominent static benchmarks, and prove that its expected success rate is exactly equal to the source agent's pass@k in deterministic environments. We trace this and other failures to two root causes: non-principled environment design (static, unsandboxed, or unreliably verified environments) and non-principled evaluation methodology (naive aggregation and misuse of pass@k for stateful UI interactions). To address the first, we propose PRISM, five design principles for CUA environments (privileged verification, realistic environments, integrity-checked configurations, sandboxed execution, and multifactorial variability) and instantiate them in DigiWorld, a benchmark of 15 realistic sandboxed mobile applications able to evaluate agents in over 3.2 million verified unique configurations. To address the second, we develop an aggregation framework pairing Wilson score intervals with hierarchical bootstrap, producing confidence intervals that correctly account for the nested structure of CUA benchmarks, as we empirically demonstrate. All together, we show that principled environment design and rigorous evaluation methodology are not optional refinements but prerequisites for meaningful CUA research.

Large language models are increasingly used to power personal agents for everyday applications, but evaluating these agents remains a challenge. Existing benchmarks still rely on sandboxed artifacts, static task design, and coarse scoring, which hinder scalability and limit progress toward reliable personal-agent evaluation. This paper introduces STAGE-Claw, an automated framework for building and evaluating realistic personal-agent scenarios in state-based personal-computing environments. Given a task hint, STAGE-Claw automatically creates and validates a realistic benchmark task with its environment, task prompts, ground truth, and related verification programs. Agents are then evaluated in realistic operating environments, where performance is measured by the correctness of the final system state rather than only the textual response. Using STAGE-Claw, this paper creates a benchmark with 40 challenging real scenario agent tasks, evaluates 11 frontier models, and analyzes their task scores, costs, tool-call reliability, and common failure patterns. Overall, STAGE-Claw offers a scalable, state-based way to evaluate agents in realistic user scenarios.

3D Scene Graphs (3DSGs) constitute a powerful representation of the physical world, distinguished by their abilities to explicitly model the complex spatial, semantic, and functional relationships between entities, rendering a foundational understanding that enables agents to interact intelligently with their environment and execute versatile behaviors. Embodied navigation, as a crucial component of such capabilities, leverages the compact and expressive nature of 3DSGs to enable long-horizon reasoning and planning in complex, large-scale environments. However, prior works rely on a static-world assumption, defining traversable space solely based on static spatial layouts and thereby treating interactable obstacles as non-traversable. This fundamental limitation severely undermines their effectiveness in real-world scenarios, leading to limited reachability, low efficiency, and inferior extensibility. To address these issues, we propose HERO, a novel framework for constructing Hierarchical Traversable 3DSGs, that redefines traversability by modeling operable obstacles as pathways, capturing their physical interactivity, functional semantics, and the scene's relational hierarchy. The results show that, relative to its baseline, HERO reduces PL by 35.1% in partially obstructed environments and increases SR by 79.4% in fully obstructed ones, demonstrating substantially higher efficiency and reachability.

This paper presents a safety-critical control framework tailored for quadruped robots equipped with a roller arm, particularly when performing locomotive tasks such as autonomous robotic inspection in complex, multi-tiered environments. In this study, we consider the problem of operating a quadrupedal robot in distillation columns, locomoting on column trays and transitioning between these trays with a roller arm. To address this problem, our framework encompasses the following key elements: 1) Trajectory generation for seamless transitions between columns, 2) Foothold re-planning in regions deemed unsafe, 3) Safety-critical control incorporating control barrier functions, 4) Gait transitions based on safety levels, and 5) A low-level controller. Our comprehensive framework, comprising these components, enables autonomous and safe locomotion across multiple layers. We incorporate reduced-order and full-body models to ensure safety, integrating safety-critical control and footstep re-planning approaches. We validate the effectiveness of our proposed framework through practical experiments involving a quadruped robot equipped with a roller arm, successfully navigating and transitioning between different levels within the column tray structure.

Language environments such as web browsers, code terminals, and interactive simulations emit raw text rather than states, and provide none of the runtime structure that MDP analysis requires. No explicit state space, no observation-to-state mapping, no certified transitions, and no termination criterion. We introduce the State-Centric Decision Process (SDP), a runtime framework that constructs these missing inputs by having the agent build them, predicate by predicate, as it acts. At each step the agent commits to a natural-language predicate describing how the world should look, takes an action to make it true, and checks the observation against it. Predicates that pass become certified states, and the resulting trajectory carries the four objects language environments do not provide, namely a task-induced state space, an observation-to-state mapping, certified transitions, and a termination criterion. We evaluate SDP on five benchmarks spanning planning, scientific exploration, web reasoning, and multi-hop question answering. SDP achieves the best training-free results on all five, with the advantage widening as the horizon grows. The certified trajectories additionally support analyses unavailable to reactive agents, including per-predicate credit assignment, failure localization, partial-progress measurement, and modular operator replacement.

Clawdbot is a self-hosted, tool-using personal AI agent with a broad action space spanning local execution and web-mediated workflows, which raises heightened safety and security concerns under ambiguity and adversarial steering. We present a trajectory-centric evaluation of Clawdbot across six risk dimensions. Our test suite samples and lightly adapts scenarios from prior agent-safety benchmarks (including ATBench and LPS-Bench) and supplements them with hand-designed cases tailored to Clawdbot's tool surface. We log complete interaction trajectories (messages, actions, tool-call arguments/outputs) and assess safety using both an automated trajectory judge (AgentDoG-Qwen3-4B) and human review. Across 34 canonical cases, we find a non-uniform safety profile: performance is generally consistent on reliability-focused tasks, while most failures arise under underspecified intent, open-ended goals, or benign-seeming jailbreak prompts, where minor misinterpretations can escalate into higher-impact tool actions. We supplemented the overall results with representative case studies and summarized the commonalities of these cases, analyzing the security vulnerabilities and typical failure modes that Clawdbot is prone to trigger in practice.

Personal AI agents like OpenClaw run with elevated privileges on users' local machines, where a single successful prompt injection can leak credentials, redirect financial transactions, or destroy files. This threat goes well beyond conventional text-level jailbreaks, yet existing safety evaluations fall short: most test models in isolated chat settings, rely on synthetic environments, and do not account for how the agent framework itself shapes safety outcomes. We introduce CLAWSAFETY, a benchmark of 120 adversarial test scenarios organized along three dimensions (harm domain, attack vector, and harmful action type) and grounded in realistic, high-privilege professional workspaces spanning software engineering, finance, healthcare, law, and DevOps. Each test case embeds adversarial content in one of three channels the agent encounters during normal work: workspace skill files, emails from trusted senders, and web pages. We evaluate five frontier LLMs as agent backbones, running 2,520 sandboxed trials across all configurations. Attack success rates (ASR) range from 40\% to 75\% across models and vary sharply by injection vector, with skill instructions (highest trust) consistently more dangerous than email or web content. Action-trace analysis reveals that the strongest model maintains hard boundaries against credential forwarding and destructive actions, while weaker models permit both. Cross-scaffold experiments on three agent frameworks further demonstrate that safety is not determined by the backbone model alone but depends on the full deployment stack, calling for safety evaluation that treats model and framework as joint variables. Code and data will be available at: https://weibowen555.github.io/ClawSafety/.

We consider dynamic stair climbing with the HRP-4 humanoid robot as part of an Airbus manufacturing use-case demonstrator. We share experimental knowledge gathered so as to achieve this task, which HRP-4 had never been challenged to before. In particular, we extend walkingstabilization based on linear inverted pendulum tracking by quadratic programming-based wrench distribution and a whole-body admittance controller that applies both end-effector and CoM strategies. While existing stabilizers tend to use either one or the other, our experience suggests that the combination of these two approaches improves tracking performance. We demonstrate this solution in an on-site experiment where HRP-4 climbs an industrial staircase with 18.5 cm high steps, and release our walking controller as open source software.

Wheel-legged robots with integrated manipulators hold great promise for mobile manipulation in logistics, industrial automation, and human-robot collaboration. However, unified control of such systems remains challenging due to the redundancy in degrees of freedom, complex wheel-ground contact dynamics, and the need for seamless coordination between locomotion and manipulation. In this work, we present the design and whole-body motion control of an omnidirectional wheel-legged quadrupedal robot equipped with a dexterous manipulator. The proposed platform incorporates independently actuated steering modules and hub-driven wheels, enabling agile omnidirectional locomotion with high maneuverability in structured environments. To address the challenges of contact-rich interaction, we develop a contact-aware whole-body dynamic optimization framework that integrates point-contact modeling for manipulation with line-contact modeling for wheel-ground interactions. A warm-start strategy is introduced to accelerate online optimization, ensuring real-time feasibility for high-dimensional control. Furthermore, a unified kinematic model tailored for the robot's 4WIS-4WID actuation scheme eliminates the need for mode switching across different locomotion strategies, improving control consistency and robustness. Simulation and experimental results validate the effectiveness of the proposed framework, demonstrating agile terrain traversal, high-speed omnidirectional mobility, and precise manipulation under diverse scenarios, underscoring the system's potential for factory automation, urban logistics, and service robotics in semi-structured environments.

Reliable odometry for legged robots without cameras or LiDAR remains challenging due to IMU drift and noisy joint velocity sensing. This paper presents a purely proprioceptive state estimator that uses only IMU and motor measurements to jointly estimate body pose and velocity, with a unified formulation applicable to biped, quadruped, and wheel-legged robots. The key idea is to treat each contacting leg as a kinematic anchor: joint-torque--based foot wrench estimation selects reliable contacts, and the corresponding footfall positions provide intermittent world-frame constraints that suppress long-term drift. To prevent elevation drift during extended traversal, we introduce a lightweight height clustering and time-decay correction that snaps newly recorded footfall heights to previously observed support planes. To improve foot velocity observations under encoder quantization, we apply an inverse-kinematics cubature Kalman filter that directly filters foot-end velocities from joint angles and velocities. The implementation further mitigates yaw drift through multi-contact geometric consistency and degrades gracefully to a kinematics-derived heading reference when IMU yaw constraints are unavailable or unreliable. We evaluate the method on four quadruped platforms (three Astrall robots and a Unitree Go2 EDU) using closed-loop trajectories. On Astrall point-foot robot~A, a sim200\,m horizontal loop and a sim15\,m vertical loop return with 0.1638\,m and 0.219\,m error, respectively; on wheel-legged robot~B, the corresponding errors are 0.2264\,m and 0.199\,m. On wheel-legged robot~C, a sim700\,m horizontal loop yields 7.68\,m error and a sim20\,m vertical loop yields 0.540\,m error. Unitree Go2 EDU closes a sim120\,m horizontal loop with 2.2138\,m error and a sim8\,m vertical loop with less than 0.1\,m vertical error. github.com/ShineMinxing/Ros2Go2Estimator.git

Estimating traversability in unstructured environments requires conditioning on robot embodiment, as the same terrain can be traversable for one platform and unsafe for another. Existing methods often transfer predictions across morphologies through late-stage trajectory filtering rather than encoding platform constraints in the learned representation. We propose Capability-Aware Traversability (CAT), a framework that embeds physical limits directly into the spatial feature space. CAT grounds dense supervision masks in physical trajectories through an interactive annotation pipeline and modulates semantic terrain maps with robot-specific traversability vectors through Spatially-Adaptive Denormalization (SPADE) blocks. Across human-annotated and trajectory-aligned datasets, CAT leads all ranking-based metrics, improving AUROC by 11.0% on physically executed trajectories and AUPRC by 15.8% on human traces over the strongest baseline. Ablations show that spatial conditioning and per-robot prototypes produce capability sensitivity beyond generic path prediction. Deployments on a legged quadruped and a wheeled skid-steer demonstrate embodiment-aware obstacle avoidance on embedded hardware at 4.8 Hz.

AI agents may be able to automate your inbox, but can they automate other routine aspects of your life? Everyday online tasks offer a realistic yet unsolved testbed for evaluating the next generation of AI agents. To this end, we introduce ClawBench, an evaluation framework of 153 simple tasks that people need to accomplish regularly in their lives and work, spanning 144 live platforms across 15 categories, from completing purchases and booking appointments to submitting job applications. These tasks require demanding capabilities beyond existing benchmarks, such as obtaining relevant information from user-provided documents, navigating multi-step workflows across diverse platforms, and write-heavy operations like filling in many detailed forms correctly. Unlike existing benchmarks that evaluate agents in offline sandboxes with static pages, ClawBench operates on production websites, preserving the full complexity, dynamic nature, and challenges of real-world web interaction. A lightweight interception layer captures and blocks only the final submission request, ensuring safe evaluation without real-world side effects. Our evaluations of 7 frontier models show that both proprietary and open-source models can complete only a small portion of these tasks. For example, Claude Sonnet 4.6 achieves only 33.3%. Progress on ClawBench brings us closer to AI agents that can function as reliable general-purpose assistants.

Despite rapid progress in LLM agents, performance on long-horizon, tool-using tasks remains fragile. To better understand this fragility, we ask a simple question: do all actions contribute equally to failure? Analyzing execution traces on τ-Bench (Airline/Retail) and SWE-Bench Verified, we decompose trajectories into mutating (environment-changing) vs.\ non-mutating steps and formalize decisive deviations, earliest action, level divergences that flip success to failure. A logistic regression reveals that each additional deviation in a mutating action reduces the odds of success by upto 92% on Airline and upto 96% on Retail for SoTA models. In contrast, deviations in non-mutating actions have little to no effect. Errors also grow with context length as agents drift from role and act on stale constraints. Motivated by these observations, we introduce , a model-agnostic, gradient-free, test-time safeguard that (i) adds mutation-gated verification, (ii) injects Targeted Reflection before mutating steps, and (iii) performs block-based context cleaning. delivers consistent gains, e.g., Qwen3-Thinking: +28\% relative on Airline, +11\% on Retail, and +7\% on SWE-Bench Verified; Claude: +9\%/+7\%. We further identify ceiling effects in τ-Bench, where annotation errors and underspecified tasks artificially cap model performance. To address this, we release τ-Bench Verified, which restores benchmark headroom through targeted revisions. Our results argue for action-level analysis, targeted safeguards, and reliable evaluations as prerequisites for robust multi-turn agents.

Safety benchmark scores provide incomplete evidence of deployment readiness: aligned language models often adhere to rigid rules even when a situational update flips which action is safe. We term this failure brittle safety. To diagnose it, we introduce context-flip evaluation, testing 12 models across a safety benchmark (PacifAIst) and two commonsense controls using paired variants where the nominally safe action produces harm. Three findings emerge. First, brittle safety is safety-specific: all 12 models exhibit a safety-commonsense gap (mean +17.4 pp). Baseline accuracy fails to predict brittleness: among models above 90% baseline accuracy, brittleness rates range from 13.7% to 90.0%. Second, failures stem from policy override rather than miscomprehension: despite acknowledging the context change in every case, models persist via three distinct mechanisms that vary by update type and model family. Third, on a hand-audited probe of catastrophic consequence-flip scenarios, standard action-level guardrails catch none, while a state-aware validator catches all without false alarms on correct interventions. This indicates that action-level content moderation is systematically blind to consequence-flips, motivating state-aware architectural alternatives. We release our protocol, perturbed benchmarks, and deployment probe.

Takeovers remain a key safety vulnerability in production ADAS, yet existing public resources rarely provide takeover-centered, real-world data. We present ADAS-TO, the first large-scale naturalistic dataset dedicated to ADAS-to-manual transitions, containing 15,659 takeover-centered 20s clips from 327 drivers across 22 vehicle brands. Each clip synchronizes front-view video with CAN logs. Takeovers are defined as ADAS ON rightarrow OFF transitions, with the primary trigger labeled as brake, steer, gas, mixed, or system disengagement. We further separate planned driver-initiated terminations (Ego) from forced takeovers (Non-ego) using a rule-based partition. While most events occur within conservative kinematic margins, we identify a long tail of 285 safety-critical cases. For these events, we combine kinematic screening with vision--language (VLM) annotation to attribute hazards and relate them to intervention dynamics. The resulting cross-modal analysis shows distinct kinematic signatures across traffic dynamics, infrastructure degradation, and adverse environments, and finds that in 59.3% of critical cases, actionable visual cues emerge at least 3s before takeover, supporting the potential for semantics-aware early warning beyond late-stage kinematic triggers. The dataset is publicly released at huggingface.co/datasets/HenryYHW/ADAS-TO-Sample.

LLM-based agents can interact with external environments through tool invocation, but this capability also introduces security risks such as file modification, information leakage, and unauthorized actions. Existing guardrails often evaluate completed trajectories, leaving pre-execution monitoring of step-level actions underexplored. We propose StepGuard, a step-level guard model that can audit completed agent trajectories and check tool actions before they are executed. To train StepGuard, we introduce StepGen, an automatic data engine that generates safe and unsafe trajectories with the same context but different actions at the risky step. To further reduce over-defense and under-defense, we propose Balance-GRPO, which dynamically balances learning between safe and unsafe actions based on their observed accuracy. Experiments show that StepGuard achieves the highest average accuracy among open-weight guard models, with performance comparable to GPT-5.4. When used to guard agents on AgentDojo and AgentDyn, StepGuard reduces mean attack success rate by 77.3% relative to the no-guard setting, while mean utility drops by only 2.8 percentage points.

The prevalent paradigm in robot learning attempts to generalize across environments, embodiments, and tasks with language prompts at runtime. A fundamental tension limits this approach: language is often too abstract to guide the concrete physical understanding required for robust manipulation. In this work, we introduce Contact-Anchored Policies (CAP), which replace language conditioning with points of physical contact in space. Simultaneously, we structure CAP as a library of modular utility models rather than a monolithic generalist policy. This factorization allows us to implement a real-to-sim iteration cycle: we build EgoGym, a lightweight simulation benchmark, to rapidly identify failure modes and refine our models and datasets prior to real-world deployment. We show that by conditioning on contact and iterating via simulation, CAP generalizes to novel environments and embodiments out of the box on three fundamental manipulation skills while using only 23 hours of demonstration data, and outperforms large, state-of-the-art VLAs in zero-shot evaluations by 56%. All model checkpoints, codebase, hardware, simulation, and datasets will be open-sourced. Project page: https://cap-policy.github.io/

Agent benchmarks typically report only final outcomes: pass or fail. This threatens evaluation credibility in three ways. First, scores may be inflated or deflated by shortcuts and benchmark artifacts, misrepresenting capability. Second, benchmark performance may fail to predict real-world utility due to scaffold limitations and recurring failure modes. Finally, capability scores may conceal dangerous or catastrophic actions taken by the agent. We argue that log analysis -- the systematic tracking and analysis of the inputs, execution, and outputs of an AI agent -- is necessary to overcome these validity threats and promote credible agent evaluation. In this paper, we (1) present a taxonomy of threats to credible evaluation documented through log analysis, and (2) develop a set of guiding principles for log analysis. We illustrate these principles on tau-Bench Airline, revealing that pass^5 performance was under-elicited by nearly 50% and surfacing deployment failure modes invisible to outcome metrics. We conclude with pragmatic recommendations to increase uptake of log analysis, directed at diverse stakeholders including benchmark creators, model developers, independent evaluators, and deployers.

In this paper we present a comparative study of path feasibility queries generated during path exploration based software engineering methods. Symbolic execution based methods are gaining importance in different aspects of software engineering e.g. proving properties about programs, test case generation, comparing different executions of programs. These methods use SMT solvers to check the satisfiability of path feasibility queries written as a formula in the supported theories. We study the performance of solving such path feasibility queries using SMT solvers for real world programs. Our path condition formulas are generated in a theory of quantifier free bit vectors with arrays (QF_ABV). We show that among the different SMT solvers, STP is better than Z3 by an order of magnitude for such kind of queries. As an application we design a new program analysis (Change Value Analysis) based on our study which exploits undefined behaviors in programs. We have implemented our analysis in LLVM and tested it with the benchmark of SIR programs. It reduces the time taken for solving path feasibility queries by 48%. The study can serve as guidance to practitioners using path feasibility queries to create scalable software engineering methods based on symbolic execution.

Vision-language-action models (VLAs) have been extensively used in robotics applications, achieving great success in various manipulation problems. More recently, VLAs have been used in long-horizon tasks and evaluated on benchmarks, such as BEHAVIOR1K (B1K), for solving complex household chores. The common metric for measuring progress in such benchmarks is success rate or partial score based on satisfaction of progress-agnostic criteria, meaning only the final states of the objects are considered, regardless of the events that lead to such states. In this paper, we argue that using such evaluation protocols say little about safety aspects of operation and can potentially exaggerate reported performance, undermining core challenges for future real-world deployment. To this end, we conduct a thorough analysis of state-of-the-art models on the B1K Challenge and evaluate policies in terms of robustness via reproducibility and consistency of performance, safety aspects of policies operations, task awareness, and key elements leading to the incompletion of tasks. We then propose evaluation protocols to capture safety violations to better measure the true performance of the policies in more complex and interactive scenarios. At the end, we discuss the limitations of the existing VLAs and motivate future research.

Tool-using agents make consequential changes to external state, yet correct outcomes do not guarantee that their actions were supported by evidence established beforehand. We study where this evidence-to-action chain breaks as agents move from deciding whether to act to executing single actions and dependent workflows. Across ten model-harness configurations, strong static action assessment can coexist with much weaker interactive execution. Failures often begin before execution: agents stop with incomplete investigation or act before required evidence is established. Once required evidence is obtained, single-action execution is usually reliable, while multi-action workflows additionally expose unresolved prerequisites and incomplete execution. For this analysis, we introduce SafeActBench, comprising 656 cases across six operational domains and five protocols that progress from static action judgment and investigated non-action to single- and multi-action workflows. A provenance-bound Evidence Ledger and deterministic trajectory evaluator track what information was established, when actions occurred, and whether downstream dependencies were satisfied. These results show that failures arise not only from missing information, but also from how agents use established evidence when deciding and executing actions.

Voting over multiple LLM responses is a common primitive in test-time scaling and ensemble inference. Collecting more responses can expand the candidate pool and increase the chance that a correct answer is discovered. Under a fixed call budget, a discovered answer still needs to accumulate enough support within the remaining calls to become the final plurality winner, creating a discovery-to-decision gap. In this work, we characterize this gap through the realized vote state and remaining call budget. We derive a sharp recoverability threshold and show that, as sampling proceeds, the observed candidate set can only expand while the set of reachable endpoint winners can only contract, inducing a candidate-level conversion window. Under a specified iid response law, the same state yields exact finite-horizon endpoint probabilities. We further show that merging wrong-answer identities preserves single-call correctness and cannot improve plurality accuracy, and that the effect of redistributing wrong-answer probability depends on the realized vote state. Singleton reachability yields a gold-free exact locking certificate. For a known answer universe, its first trigger is the earliest prefix at which all admissible continuations yield the same fixed-budget output. Empirically, most discovered-but-unselected correct answers lose reachability only after discovery. In a controlled Word16 study, input permutation improves raw-plurality accuracy by 21.1 points with essentially unchanged single-call correctness. Exact locking saves 28-30% of calls at a 16-call budget while preserving every fixed-budget output.

With the rapid advancement of agent-based methods in recent years, Agentic RAG has undoubtedly become an important research direction. Multi-hop reasoning, which requires models to engage in deliberate thinking and multi-step interaction, serves as a critical testbed for assessing such capabilities. However, existing benchmarks typically provide only final questions and answers, while lacking the intermediate hop-level questions that gradually connect atomic questions to the final multi-hop query. This limitation prevents researchers from analyzing at which step an agent fails and restricts more fine-grained evaluation of model capabilities. Moreover, most current benchmarks are manually constructed, which is both time-consuming and labor-intensive, while also limiting scalability and generalization. To address these challenges, we introduce AgenticRAGTracer, the first Agentic RAG benchmark that is primarily constructed automatically by large language models and designed to support step-by-step validation. Our benchmark spans multiple domains, contains 1,305 data points, and has no overlap with existing mainstream benchmarks. Extensive experiments demonstrate that even the best large language models perform poorly on our dataset. For instance, GPT-5 attains merely 22.6\% EM accuracy on the hardest portion of our dataset. Hop-aware diagnosis reveals that failures are primarily driven by distorted reasoning chains -- either collapsing prematurely or wandering into over-extension. This highlights a critical inability to allocate steps consistent with the task's logical structure, providing a diagnostic dimension missing in traditional evaluations. We believe our work will facilitate research in Agentic RAG and inspire further meaningful progress in this area. Our code and data are available at https://github.com/YqjMartin/AgenticRAGTracer.

Safety verification in Computer Numerical Control (CNC) machining has traditionally relied on simulation-based methods that require repetitive tests when requirements change. This paper introduces a formal verification framework that conceptualizes the physical CNC workspace as a Spatial Heap, treating physical occupancy as a managed logical resource. Central to our approach is a Parser-Prover Handshake that decouples machine kinematics from formal logic. By mapping tool trajectories and safety buffers into a discrete spatial model prior to evaluation, the framework enables the use of Separation Logic (SL) to verify safety via formal triples. Within this model, physical collisions are redefined as logical Spatial Data Races, detected through the failure of the separating conjunction to establish disjointness. Furthermore, we extend the methodology to collaborative environments using Concurrent Separation Logic (CSL), where physical hand-offs are verified as formal ownership transfers. Additionally, the framework scales to multi-axis kinematics (e.g., 5-axis Table-Table configurations) by treating the workpiece as a dynamically mutable spatial resource. By serving as a complement to traditional geometric simulation, this approach reduces the number of required iterative test cycles, offering a foundation for autonomous, less-collision manufacturing.

Recent advances in AI-assisted programming have empowered agents to execute complex workflows via command-line interfaces, however, existing benchmarks are limited by short task horizons, data contamination from GitHub scraping, and a lack of fine-grained evaluation metrics, fail to rigorously evaluate the long-horizon planning and execution capabilities essential for realistic software engineering. To address these gaps, we introduce LongCLI-Bench, a comprehensive benchmark designed to evaluate agentic capabilities across long-horizon, realistic tasks. We curated 20 high-quality, long-horizon tasks from over 1,000 computer science assignments and real-world workflows, covering four engineering categories: from scratch, feature addition, bug fixing, and refactoring. We propose a dual-set testing protocol for LongCLI-Bench, which measures requirement fulfillment (fail-to-pass) and regression avoidance (pass-to-pass), and incorporates step-level scoring to pinpoint execution failures. Extensive experiments reveal that even state-of-the-art agents achieve pass rates below 20% in LongCLI-Bench. Step-level analysis further indicates that the majority of tasks stall at less than 30% completion, highlighting that critical failures often occur in the early stages. Although self-correction offers marginal gains, human-agent collaboration through plan injection and interactive guidance yields significantly higher improvements. These results highlight that future research must emphasize the development of synergistic human-agent workflows alongside advances in agents' planning and execution capabilities to overcome key challenges in long-horizon task performance.

Memory, planning, reflection, and tool use are often compared as feature labels, obscuring the control semantics that determine how an agent actually runs. This review connects ten historical cognitive architectures, eight language-agent runtime families, and forty-two mechanism-focused modern systems. We reconstruct each mechanism through state, control, transition, persistence, failure, learning, and resource governance, then code evidence relation (E1-E4) separately from migration depth (D0-D4). The resulting landscape is uneven. Modern agents have operationalized substantial parts of adaptive memory, failure recovery, dynamic team selection, workflow search, skill induction, resource scheduling, and uncertainty-conditioned action, although often through independent convergence rather than documented inheritance. The strongest remaining opportunities lie in couplings among mechanisms. Closest-baseline screening closes one proposed gap: GraSP already combines calibrated multi-skill selection, typed compilation, verification, bounded repair, and replanning or ReAct fallback. Five residual bundles remain: activation with latency and action utility; typed impasse with isolated substates and resolution compilation; bounded content competition with broadcast and admission learning; persistent intention with reconsideration and live method authority; and uncertainty with resource allocation, interruption, and stopping. We contribute a distinctive-mechanism catalog, an auditable evidence-depth framework, and a falsifiable agenda for testing these bundles as composable runtime invariants.

Formal verification can provably guarantee the correctness of critical system software, but the high proof burden has long hindered its wide adoption. Recently, Large Language Models (LLMs) have shown success in code analysis and synthesis. In this paper, we present a combination of LLMs and static analysis to synthesize invariants, assertions, and other proof structures for a Rust-based formal verification framework called Verus. In a few-shot setting, LLMs demonstrate impressive logical ability in generating postconditions and loop invariants, especially when analyzing short code snippets. However, LLMs lack the ability to retain and propagate context information, a strength of traditional static analysis. Based on these observations, we developed a prototype based on OpenAI's GPT-4 model. Our prototype decomposes the verification task into multiple smaller ones, iteratively queries GPT-4, and combines its output with lightweight static analysis. We evaluated the prototype with a developer in the automation loop on 20 vector-manipulating programs. The results demonstrate that it significantly reduces human effort in writing entry-level proof code.

As large language models (LLMs) evolve from static chatbots into autonomous agents, the primary vulnerability surface shifts from final outputs to intermediate execution traces. While safety guardrails are well-benchmarked for natural language responses, their efficacy remains largely unexplored within multi-step tool-use trajectories. To address this gap, we introduce TraceSafe-Bench, the first comprehensive benchmark specifically designed to assess mid-trajectory safety. It encompasses 12 risk categories, ranging from security threats (e.g., prompt injection, privacy leaks) to operational failures (e.g., hallucinations, interface inconsistencies), featuring over 1,000 unique execution instances. Our evaluation of 13 LLM-as-a-guard models and 7 specialized guardrails yields three critical findings: 1) Structural Bottleneck: Guardrail efficacy is driven more by structural data competence (e.g., JSON parsing) than semantic safety alignment. Performance correlates strongly with structured-to-text benchmarks (ρ=0.79) but shows near-zero correlation with standard jailbreak robustness. 2) Architecture over Scale: Model architecture influences risk detection performance more significantly than model size, with general-purpose LLMs consistently outperforming specialized safety guardrails in trajectory analysis. 3) Temporal Stability: Accuracy remains resilient across extended trajectories. Increased execution steps allow models to pivot from static tool definitions to dynamic execution behaviors, actually improving risk detection performance in later stages. Our findings suggest that securing agentic workflows requires jointly optimizing for structural reasoning and safety alignment to effectively mitigate mid-trajectory risks.

In this paper, we present STRIDE, a Simple, Terrestrial, Reconfigurable, Intelligent, Dynamic, and Educational bipedal platform. STRIDE aims to propel bipedal robotics research and education by providing a cost-effective implementation with step-by-step instructions for building a bipedal robotic platform while providing flexible customizations via a modular and durable design. Moreover, a versatile terrain setup and a quantitative disturbance injection system are augmented to the robot platform to replicate natural terrains and push forces that can be used to evaluate legged locomotion in practical and adversarial scenarios. We demonstrate the functionalities of this platform by realizing an adaptive step-to-step dynamics based walking controller to achieve dynamic walking. Our work with the open-soured implementation shows that STRIDE is a highly versatile and durable platform that can be used in research and education to evaluate locomotion algorithms, mechanical designs, and robust and adaptative controls.

Recently, mobile AI agents have gained increasing attention. Given a task, mobile AI agents can interact with mobile devices in multiple steps and finally form a GUI flow that solves the task. However, existing agents tend to focus on most task-relevant elements at each step, leading to local optimal solutions and ignoring the overall GUI flow. To address this issue, we constructed a training dataset called MobileReach, which breaks the task into page reaching and operation subtasks. Furthermore, we propose ReachAgent, a two-stage framework that focuses on improving its task-completion abilities. It utilizes the page reaching and page operation subtasks, along with reward-based preference GUI flows, to further enhance the agent. Experimental results show that ReachAgent significantly improves the IoU Acc and Text Acc by 7.12% and 7.69% on the step-level and 4.72% and 4.63% on the task-level compared to the SOTA agent. Our data and code will be released upon acceptance.

For a humanoid robot to be deployed in the real world, the choice of command space (i.e., the interface between task planning and whole-body control) is crucial. Existing whole-body controllers typically demand dense kinematic or spatial references that planners struggle to synthesize from task semantics. We instead propose a compact, explicit interface that is intuitive, general, modular, and expressive enough for diverse manipulation skills. To this end, we introduce HANDOFF, a single humanoid whole-body controller that follows this interface and is distilled via multi-teacher KL distillation under a context-conditioned gating scheme into a mixture-of-experts student from three complementary specialists: whole-body motion tracking with safety-filtered data, locomotion, and fall-recovery. On the Unitree G1, HANDOFF matches state-of-the-art velocity tracking and offers one of the largest robust manipulation workspaces. We further demonstrate hardware feasibility through multiple natural-language-driven task roll-outs, powered by a VLM-driven agentic planner with no task-specific data or controller fine-tuning.

Recent advances in motion generation and whole-body tracking have enabled humanoid robots to execute increasingly diverse motions, yet the same motion capabilities may be requested repeatedly during continual deployment. Reliable reuse is challenging because intervening motions can change the robot's entry state, making previously successful motions unsafe to replay blindly. Meanwhile, validated capabilities accumulate during deployment, while bounded storage requires deciding which ones are worth retaining. To address these challenges, we present HumanoidTTT, a framework for test-time capability reuse in continual humanoid control. Specifically, we introduce Selective Full-Motion Reuse, which authorizes direct reuse of validated complete motions only from certified applicable entry states, allowing accepted reuse to bypass fresh generation. We further introduce Test-Time Capability Consolidation, which adapts which qualified capabilities persist in a bounded Full-Motion Store using subsequent deployment reuse as feedback. Experiments demonstrate zero unsafe accepts and a 16.4times end-to-end speedup over fresh generation, while online consolidation improves avoided generator calls by 13.2 per 200 requests over its frozen counterpart. Overall, HumanoidTTT enables reliable and efficient reuse of validated motion capabilities while adaptively retaining useful capabilities throughout continual deployment. Code: https://github.com/AIGeeksGroup/HumanoidTTT. Website: https://aigeeksgroup.github.io/HumanoidTTT.

While decoupled control schemes for legged mobile manipulators have shown robustness, learning holistic whole-body control policies for tracking global end-effector poses remains fragile against Out-of-Distribution (OOD) inputs induced by sensor noise or infeasible user commands. To improve robustness against these perturbations without sacrificing task performance and continuity, we propose Competence Manifold Projection (CMP). Specifically, we utilize a Frame-Wise Safety Scheme that transforms the infinite-horizon safety constraint into a computationally efficient single-step manifold inclusion. To instantiate this competence manifold, we employ a Lower-Bounded Safety Estimator that distinguishes unmastered intentions from the training distribution. We then introduce an Isomorphic Latent Space (ILS) that aligns manifold geometry with safety probability, enabling efficient O(1) seamless defense against arbitrary OOD intents. Experiments demonstrate that CMP achieves up to a 10-fold survival rate improvement in typical OOD scenarios where baselines suffer catastrophic failure, incurring under 10% tracking degradation. Notably, the system exhibits emergent ``best-effort'' generalization behaviors to progressively accomplish OOD goals by adhering to the competence boundaries. Result videos are available at: https://shepherd1226.github.io/CMP.

Vision-language-action (VLA) models have recently emerged as a promising paradigm for robotic control, enabling end-to-end policies that ground natural language instructions into visuomotor actions. However, current VLAs often struggle to satisfy precise task constraints, such as stopping based on numeric thresholds, since their observation-to-action mappings are implicitly shaped by training data and lack explicit mechanisms for condition monitoring. In this work, we propose CLAW (CLIP-Language-Action for Weight), a framework that decouples condition evaluation from action generation. CLAW leverages a fine-tuned CLIP model as a lightweight prompt generator, which continuously monitors the digital readout of a scale and produces discrete directives based on task-specific weight thresholds. These prompts are then consumed by π_0, a flow-based VLA policy, which integrates the prompts with multi-view camera observations to produce continuous robot actions. This design enables CLAW to combine symbolic weight reasoning with high-frequency visuomotor control. We validate CLAW on three experimental setups: single-object grasping and mixed-object tasks requiring dual-arm manipulation. Across all conditions, CLAW reliably executes weight-aware behaviors and outperforms both raw-π_0 and fine-tuned π_0 models. We have uploaded the videos as supplementary materials.

Understanding the environment and a robot's physical reachability is crucial for task execution. While state-of-the-art vision-language models (VLMs) excel in environmental perception, they often generate inaccurate or impractical responses in embodied visual reasoning tasks due to a lack of understanding of robotic physical reachability. To address this issue, we propose a unified representation of physical reachability across diverse robots, i.e., Space-Physical Reachability Map (S-P Map), and PhysVLM, a vision-language model that integrates this reachability information into visual reasoning. Specifically, the S-P Map abstracts a robot's physical reachability into a generalized spatial representation, independent of specific robot configurations, allowing the model to focus on reachability features rather than robot-specific parameters. Subsequently, PhysVLM extends traditional VLM architectures by incorporating an additional feature encoder to process the S-P Map, enabling the model to reason about physical reachability without compromising its general vision-language capabilities. To train and evaluate PhysVLM, we constructed a large-scale multi-robot dataset, Phys100K, and a challenging benchmark, EQA-phys, which includes tasks for six different robots in both simulated and real-world environments. Experimental results demonstrate that PhysVLM outperforms existing models, achieving a 14\% improvement over GPT-4o on EQA-phys and surpassing advanced embodied VLMs such as RoboMamba and SpatialVLM on the RoboVQA-val and OpenEQA benchmarks. Additionally, the S-P Map shows strong compatibility with various VLMs, and its integration into GPT-4o-mini yields a 7.1\% performance improvement.

LLM agents are expected to complete end-to-end units of work across software tools, business services, and local workspaces. Yet many agent benchmarks freeze a curated task set at release time and grade mainly the final response, making it difficult to evaluate agents against evolving workflow demand or verify whether a task was executed. We introduce Claw-Eval-Live, a live benchmark for workflow agents that separates a refreshable signal layer, updated across releases from public workflow-demand signals, from a reproducible, time-stamped release snapshot. Each release is constructed from public workflow-demand signals, with ClawHub Top-500 skills used in the current release, and materialized as controlled tasks with fixed fixtures, services, workspaces, and graders. For grading, Claw-Eval-Live records execution traces, audit logs, service state, and post-run workspace artifacts, using deterministic checks when evidence is sufficient and structured LLM judging only for semantic dimensions. The release contains 105 tasks spanning controlled business services and local workspace repair, and evaluates 13 frontier models under a shared public pass rule. Experiments reveal that reliable workflow automation remains far from solved: the leading model passes only 66.7% of tasks and no model reaches 70%. Failures are structured by task family and execution surface, with HR, management, and multi-system business workflows as persistent bottlenecks and local workspace repair comparatively easier but unsaturated. Leaderboard rank alone is insufficient because models with similar pass rates can diverge in overall completion, and task-level discrimination concentrates in a middle band of tasks. Claw-Eval-Live suggests that workflow-agent evaluation should be grounded twice, in fresh external demand and in verifiable agent action.

Automatic fall recovery is a crucial prerequisite before humanoid robots can be reliably deployed. Hand-designing controllers for getting up is difficult because of the varied configurations a humanoid can end up in after a fall and the challenging terrains humanoid robots are expected to operate on. This paper develops a learning framework to produce controllers that enable humanoid robots to get up from varying configurations on varying terrains. Unlike previous successful applications of humanoid locomotion learning, the getting-up task involves complex contact patterns, which necessitates accurately modeling the collision geometry and sparser rewards. We address these challenges through a two-phase approach that follows a curriculum. The first stage focuses on discovering a good getting-up trajectory under minimal constraints on smoothness or speed / torque limits. The second stage then refines the discovered motions into deployable (i.e. smooth and slow) motions that are robust to variations in initial configuration and terrains. We find these innovations enable a real-world G1 humanoid robot to get up from two main situations that we considered: a) lying face up and b) lying face down, both tested on flat, deformable, slippery surfaces and slopes (e.g., sloppy grass and snowfield). To the best of our knowledge, this is the first successful demonstration of learned getting-up policies for human-sized humanoid robots in the real world. Project page: https://humanoid-getup.github.io/

Agentic systems involved in high-stake decision-making under adversarial pressure need formal guarantees not offered by existing approaches. Motivated by the operational needs of security operations centers (SOCs) that must configure endpoint detection and response (EDR) policies under adversarial pressure, we present a tool-mediated architecture: LLM agents use deterministic tools (Stackelberg best-response, Bayesian observer updates, attack-graph primitives) and select from finite action catalogs enforced at the tool-output interface. A composite Lyapunov function machine-checked in Lean 4 with zero sorry certifies controllability, observability from asymmetric sensor data, and Input-to-State Stability (ISS) robustness under intelligent adversarial disturbance, with two corollaries extending the certificate to any controller or adversary from the catalogs. On 282 real enterprise attack graphs, the claims hold with margin. On paired offensive/defensive telemetry, a tool-mediated Claude Sonnet 4 controller reduces the attacker's expected payoff (game value) by 59% relative to a deterministic greedy baseline, with zero variance across 40 runs at four temperatures. A Claude Haiku 4.5 controller converges to suboptimal game values but stays catalog-bounded over an additional 40 runs, demonstrating that architectural stability is not dependent on the controller capability. The LLM agent's non-determinism furthers creative exploration of strategies, while the tool-mediated architecture ensures system stability.

Large Language Models (LLMs) have achieved remarkable progress, but their deployment has exposed critical vulnerabilities, particularly to jailbreak attacks that circumvent safety mechanisms. Guardrails--external defense mechanisms that monitor and control LLM interaction--have emerged as a promising solution. However, the current landscape of LLM guardrails is fragmented, lacking a unified taxonomy and comprehensive evaluation framework. In this Systematization of Knowledge (SoK) paper, we present the first holistic analysis of jailbreak guardrails for LLMs. We propose a novel, multi-dimensional taxonomy that categorizes guardrails along six key dimensions, and introduce a Security-Efficiency-Utility evaluation framework to assess their practical effectiveness. Through extensive analysis and experiments, we identify the strengths and limitations of existing guardrail approaches, explore their universality across attack types, and provide insights into optimizing defense combinations. Our work offers a structured foundation for future research and development, aiming to guide the principled advancement and deployment of robust LLM guardrails. The code is available at https://github.com/xunguangwang/SoK4JailbreakGuardrails.

Enterprise agents face safety risks that cannot be determined from individual actions alone. Existing safety benchmarks largely evaluate action-local risks, overlooking failures whose safety depends on workflow state. In such state-dependent risks, the same action may be safe in one context but violate policy in another. Hence, we introduce LatentRiskBench for evaluating such state-dependent risks in enterprise settings. It pairs risky trajectories with benign counterparts that share the same terminal action but differ in latent policy-relevant states, requiring models to reconstruct workflow context rather than rely on action-level cues. We also introduce new metrics for state-dependent risk evaluation, including a suite of residual risk (RR) measures. Experiments on the benchmark show that action-level evaluation detects only 0.09 of state-dependent violations, whereas state-level evaluation reaches 0.96. Existing guardrail methods largely overlook such risks unless they are explicitly applied to workflow states. Case studies on a commercial deployed scenario further show that the safety metrics embedded in the benchmark provide a more realistic measure of safety for enterprise agents. Our dataset and code are available at https://github.com/JingyueCong/LatentRiskBench.

The rapid advancement of Large Language Models (LLMs) has driven their deployment toward general-purpose harness environments, where LLM-based agents operate in sandbox workspaces and interact directly with file systems and shells. While numerous post-training pipelines exist for tool-use agents, their counterparts for harness-based agents remain scarce and are predominantly one-shot and teacher-dependent: a stronger external model synthesizes tasks and collects trajectories, the target agent is trained once, and evaluation results are consumed by human researchers rather than fed back into the loop. Such pipelines are inherently bounded by the capability of the external model and the scope of human prior, leaving no room for self-improvement. To address these limitations, we propose ClawLoop, a framework that enables self-improving without any external teacher model and with minimal prior dependencies. ClawLoop composes three phases into a self-sustaining cycle: Task Synthesis, which generates a diverse pool of training tasks via two complementary construction routines, applies diagnosis-conditioned difficulty growth followed by both agent-free and agent-based task validation; Training, which updates the agent via SFT and/or RL; and Diagnosis and Feedback, which analyzes the agent's rollout behaviors to produce a capability analysis report that will be used as feedback for task synthesis in the next iteration. Using Qwen3.6-27B as the loop model, ClawLoop yields consistent improvements on SkillsBench, Claw-Eval-Live, and ClawGym-Bench. The iteratively refined tasks are further transferred to smaller-scale Qwen3.5-4B and 9B models with gains across all benchmarks, validating data quality independently of the loop model.

Automated theorem proving with large language models in Lean 4 is commonly approached through either step-level tactic prediction with tree search or whole-proof generation. These two paradigms represent opposite granularities for constructing supervised training data: the former provides dense local signals but may fragment coherent proof processes, while the latter preserves global structure but requires complex end-to-end generation. In this paper, we revisit supervision granularity as a training set construction problem over proof trajectories and propose segment-level supervision, a training data construction strategy that extracts locally coherent proof segments for training policy models. We further reuse the same strategy at inference time to trigger short rollouts for existing step-level models. When trained with segment-level supervision on STP, LeanWorkbook, and NuminaMath-LEAN, the resulting policy models achieve proof success rates of 64.84%, 60.90%, and 66.31% on miniF2F, respectively, consistently outperforming both step-level and whole-proof baselines. Goal-aware rollout further improves existing step-level provers while reducing inference costs. It increases the proof success rate of BFS-Prover-V2-7B from 68.77% to 70.74% and that of InternLM2.5-StepProver from 59.59% to 60.33%, showing that appropriate supervision granularity better aligns model learning with proof structure and search. Code and models are available at https://github.com/NJUDeepEngine/SEG-ATP.

We focus on agile, continuous, and terrain-adaptive jumping of quadrupedal robots in discontinuous terrains such as stairs and stepping stones. Unlike single-step jumping, continuous jumping requires accurately executing highly dynamic motions over long horizons, which is challenging for existing approaches. To accomplish this task, we design a hierarchical learning and control framework, which consists of a learned heightmap predictor for robust terrain perception, a reinforcement-learning-based centroidal-level motion policy for versatile and terrain-adaptive planning, and a low-level model-based leg controller for accurate motion tracking. In addition, we minimize the sim-to-real gap by accurately modeling the hardware characteristics. Our framework enables a Unitree Go1 robot to perform agile and continuous jumps on human-sized stairs and sparse stepping stones, for the first time to the best of our knowledge. In particular, the robot can cross two stair steps in each jump and completes a 3.5m long, 2.8m high, 14-step staircase in 4.5 seconds. Moreover, the same policy outperforms baselines in various other parkour tasks, such as jumping over single horizontal or vertical discontinuities. Experiment videos can be found at https://yxyang.github.io/jumping\_cod/.

The rapid advancement and widespread deployment of foundation model (FM) based systems have revolutionized numerous applications across various domains. However, the fast-growing capabilities and autonomy have also raised significant concerns about responsible AI and AI safety. Recently, there have been increasing attention toward implementing guardrails to ensure the runtime behavior of FM-based systems is safe and responsible. Given the early stage of FMs and their applications (such as agents), the design of guardrails have not yet been systematically studied. It remains underexplored which software qualities should be considered when designing guardrails and how these qualities can be ensured from a software architecture perspective. Therefore, in this paper, we present a taxonomy for guardrails to classify and compare the characteristics and design options of guardrails. Our taxonomy is organized into three main categories: the motivation behind adopting runtime guardrails, the quality attributes to consider, and the design options available. This taxonomy provides structured and concrete guidance for making architectural design decisions when designing guardrails and highlights trade-offs arising from the design decisions.

Physically grounded 3D assets are increasingly important for embodied AI and robotic simulation. However, most existing 3D assets lack unified physical semantics, including articulation semantics and intrinsic physical properties, required for realistic interaction. Current approaches either treat these semantics independently or rely on canonicalized object structures, limiting robustness across heterogeneous 3D assets. We present UniPhys, a scalable framework for automatically transforming raw 3D assets into simulation-ready assets with unified physical semantics. Based on UniPhys, we construct UniPhys-40K, a large-scale physically grounded dataset, together with UniPhys-Bench, a carefully verified benchmark for unified physical grounding evaluation. We further introduce UniPhysGen, a unified physical grounding model that jointly reasons over articulation semantics and intrinsic physical properties. UniPhysGen incorporates geometry-robust articulation grounding to mitigate geometric shortcut bias under heterogeneous part decompositions. Extensive experiments demonstrate state-of-the-art performance across articulation grounding and intrinsic physical property estimation tasks, while the resulting assets can be directly deployed in robotic simulation environments for realistic physical interaction. Our code and dataset will be available at https://github.com/breezexian/UniPhysGen.

The rapid advancement of Large Language Models (LLMs) has catalyzed the development of autonomous agents capable of navigating complex environments. However, existing evaluations primarily adopt a deductive paradigm, where agents execute tasks based on explicitly provided rules and static goals, often within limited planning horizons. Crucially, this neglects the inductive necessity for agents to discover latent transition laws from experience autonomously, which is the cornerstone for enabling agentic foresight and sustaining strategic coherence. To bridge this gap, we introduce OdysseyArena, which re-centers agent evaluation on long-horizon, active, and inductive interactions. We formalize and instantiate four primitives, translating abstract transition dynamics into concrete interactive environments. Building upon this, we establish OdysseyArena-Lite for standardized benchmarking, providing a set of 120 tasks to measure an agent's inductive efficiency and long-horizon discovery. Pushing further, we introduce OdysseyArena-Challenge to stress-test agent stability across extreme interaction horizons (e.g., > 200 steps). Extensive experiments on 15+ leading LLMs reveal that even frontier models exhibit a deficiency in inductive scenarios, identifying a critical bottleneck in the pursuit of autonomous discovery in complex environments. Our code and data are available at https://github.com/xufangzhi/Odyssey-Arena

We study how runtime enforcement against unsafe actions affects end-to-end task performance in multi-step tool using large language model (LLM) agents. Using tau-bench across Airline and Retail domains, we compare baseline Tool-Calling, planning-integrated (TRIAD), and policy-mediated (TRIAD-SAFETY) architectures with GPT-OSS-20B and GLM-4-9B. We identify model dependent interaction horizons (15 to 30 turns) and decompose outcomes into overall success rate (SR), safe success rate (SSR), and unsafe success rate (USR). Our results reveal a persistent Safety Capability Gap. While safety mediation can intercept up to 94 percent of non-compliant actions, it rarely translates into strictly safe goal attainment (SSR below 5 percent in most settings). We find that high unsafe success rates are primarily driven by Integrity Leaks, where models hallucinate user identifiers to bypass mandatory authentication. Recovery rates following blocked actions are consistently low, ranging from 21 percent for GPT-OSS-20B in simpler procedural tasks to near zero in complex Retail scenarios. These results demonstrate that runtime enforcement imposes a significant verifier tax on conversational length and compute cost without guaranteeing safe completion, highlighting the critical need for agents capable of grounded identity verification and post-intervention reasoning.

Ensuring AI safety is crucial as large language models become increasingly integrated into real-world applications. A key challenge is jailbreak, where adversarial prompts bypass built-in safeguards to elicit harmful disallowed outputs. Inspired by psychological foot-in-the-door principles, we introduce FITD,a novel multi-turn jailbreak method that leverages the phenomenon where minor initial commitments lower resistance to more significant or more unethical transgressions. Our approach progressively escalates the malicious intent of user queries through intermediate bridge prompts and aligns the model's response by itself to induce toxic responses. Extensive experimental results on two jailbreak benchmarks demonstrate that FITD achieves an average attack success rate of 94% across seven widely used models, outperforming existing state-of-the-art methods. Additionally, we provide an in-depth analysis of LLM self-corruption, highlighting vulnerabilities in current alignment strategies and emphasizing the risks inherent in multi-turn interactions. The code is available at https://github.com/Jinxiaolong1129/Foot-in-the-door-Jailbreak.

The dominant paradigm for building LLM based agents is the Agent Loop, an iterative cycle where a single language model decides what to do next by reading an ever growing context window. This paradigm has three structural weaknesses: implicit dependencies between steps, unbounded recovery loops, and mutable execution history that complicates debugging. We characterize the Agent Loop as a single ready unit scheduler: at any moment, at most one executable unit is active, and the choice of which unit to activate comes from opaque LLM inference rather than an inspectable policy. This perspective places Agent Loops and graph based execution engines on a single semantic continuum. We propose SGH, Structured Graph Harness, which lifts control flow from implicit context into an explicit static DAG. SGH makes three commitments: execution plans are immutable within a plan version, planning execution and recovery are separated into three layers, and recovery follows a strict escalation protocol. These choices trade some expressiveness for controllability, verifiability, and implementability. Our contributions are fourfold: a scheduler unified framework that applies classical scheduling theory to LLM agent execution and identifies challenges introduced by non deterministic LLM nodes; a trade off analysis of controllability, expressiveness, and implementability across 70 surveyed systems; a formal specification including a node state machine with termination and soundness guarantees; and an attributable experimental framework with a seven group design for future validation. This is a position paper and design proposal. We provide a theoretical framework, design analysis, and experimental protocol, not a production implementation or empirical results.

In this paper we present a novel probabilistic sampling-based motion planning algorithm called the Fast Marching Tree algorithm (FMT*). The algorithm is specifically aimed at solving complex motion planning problems in high-dimensional configuration spaces. This algorithm is proven to be asymptotically optimal and is shown to converge to an optimal solution faster than its state-of-the-art counterparts, chiefly PRM* and RRT*. The FMT* algorithm performs a "lazy" dynamic programming recursion on a predetermined number of probabilistically-drawn samples to grow a tree of paths, which moves steadily outward in cost-to-arrive space. As a departure from previous analysis approaches that are based on the notion of almost sure convergence, the FMT* algorithm is analyzed under the notion of convergence in probability: the extra mathematical flexibility of this approach allows for convergence rate bounds--the first in the field of optimal sampling-based motion planning. Specifically, for a certain selection of tuning parameters and configuration spaces, we obtain a convergence rate bound of order O(n^{-1/d+ρ}), where n is the number of sampled points, d is the dimension of the configuration space, and ρ is an arbitrarily small constant. We go on to demonstrate asymptotic optimality for a number of variations on FMT*, namely when the configuration space is sampled non-uniformly, when the cost is not arc length, and when connections are made based on the number of nearest neighbors instead of a fixed connection radius. Numerical experiments over a range of dimensions and obstacle configurations confirm our theoretical and heuristic arguments by showing that FMT*, for a given execution time, returns substantially better solutions than either PRM* or RRT*, especially in high-dimensional configuration spaces and in scenarios where collision-checking is expensive.

Industrial disruption replanning demands multi-agent coordination under strict latency and communication budgets, where disruptions propagate through tightly coupled physical dependencies and rapidly invalidate baseline schedules and commitments. Existing coordination schemes often treat communication as either effectively free (broadcast-style escalation) or fixed in advance (hand-tuned neighborhoods), both of which are brittle once the disruption footprint extends beyond a local region. We present \CASCADE, a budgeted replanning mechanism that makes communication scope explicit and auditable rather than fixed or implicit. Each agent maintains an explicit knowledge base, solves role-conditioned local decision problems to revise commitments, and coordinates through lightweight contract primitives whose footprint expands only when local validation indicates that the current scope is insufficient. This design separates a unified agent substrate (Knowledge Base / Decision Manager / Communication Manager) from a scoped interaction layer that controls who is contacted, how far coordination propagates, and when escalation is triggered under explicit budgets. We evaluate \CASCADE on disrupted manufacturing and supply-chain settings using unified diagnostics intended to test a mechanism-design claim -- whether explicit scope control yields useful quality-latency-communication trade-offs and improved robustness under uncertainty -- rather than to provide a complete algorithmic ranking.

Large language models (LLMs) typically deploy safety mechanisms to prevent harmful content generation. Most current approaches focus narrowly on risks posed by malicious actors, often framing risks as adversarial events and relying on defensive refusals. However, in real-world settings, risks also come from non-malicious users seeking help while under psychological distress (e.g., self-harm intentions). In such cases, the model's response can strongly influence the user's next actions. Simple refusals may lead them to repeat, escalate, or move to unsafe platforms, creating worse outcomes. We introduce Constructive Safety Alignment (CSA), a human-centric paradigm that protects against malicious misuse while actively guiding vulnerable users toward safe and helpful results. Implemented in Oyster-I (Oy1), CSA combines game-theoretic anticipation of user reactions, fine-grained risk boundary discovery, and interpretable reasoning control, turning safety into a trust-building process. Oy1 achieves state-of-the-art safety among open models while retaining high general capabilities. On our Constructive Benchmark, it shows strong constructive engagement, close to GPT-5, and unmatched robustness on the Strata-Sword jailbreak dataset, nearing GPT-o1 levels. By shifting from refusal-first to guidance-first safety, CSA redefines the model-user relationship, aiming for systems that are not just safe, but meaningfully helpful. We release Oy1, code, and the benchmark to support responsible, user-centered AI.

The rapid expansion of capabilities in Large Language Model (LLM) agents has exposed a critical architectural bottleneck: when agents are given access to a flat, monolithic registry of tools, the model must evaluate hundreds or thousands of options simultaneously. This leads to decision-space explosion, context window saturation, and degraded routing accuracy. To address these limitations, this paper presents a hierarchical, skill-based architecture for agentic orchestration. Capabilities are organized as a rooted tree where internal nodes make routing decisions and leaf nodes execute deterministic tasks. The runtime enforces a single-step execution loop governed by a Last-In-First-Out (LIFO) stack, giving the agent a form of memory akin to a Pushdown Automaton, therefore enabling it to track nested execution contexts and resume deterministically from any depth. Capability discovery follows a manifest-driven, lazy-loading protocol: only the immediate children of the active node are loaded, so memory and prompt costs scale with the explored path rather than the global registry. By replacing global memory with localized stack frames, the architecture prevents outputs from one execution branch from leaking into another, establishing the isolation guarantees required for deployment in regulated enterprise environments. We also discuss UPI Help, an AI-powered digital payments support product, as a motivating production deployment context. We provide a mathematical formalization of the orchestration state, detailed algorithmic analysis of the execution loop, and controlled benchmarks comparing flat and hierarchical routing under increasing tool catalogs, multi-step workflow pressure, and visible schema-token exposure per LLM call.

This paper presents the Neural Network Verification (NNV) software tool, a set-based verification framework for deep neural networks (DNNs) and learning-enabled cyber-physical systems (CPS). The crux of NNV is a collection of reachability algorithms that make use of a variety of set representations, such as polyhedra, star sets, zonotopes, and abstract-domain representations. NNV supports both exact (sound and complete) and over-approximate (sound) reachability algorithms for verifying safety and robustness properties of feed-forward neural networks (FFNNs) with various activation functions. For learning-enabled CPS, such as closed-loop control systems incorporating neural networks, NNV provides exact and over-approximate reachability analysis schemes for linear plant models and FFNN controllers with piecewise-linear activation functions, such as ReLUs. For similar neural network control systems (NNCS) that instead have nonlinear plant models, NNV supports over-approximate analysis by combining the star set analysis used for FFNN controllers with zonotope-based analysis for nonlinear plant dynamics building on CORA. We evaluate NNV using two real-world case studies: the first is safety verification of ACAS Xu networks and the second deals with the safety verification of a deep learning-based adaptive cruise control system.

With the rise of generative large language models (LLMs) like LLaMA and ChatGPT, these models have significantly transformed daily life and work by providing advanced insights. However, as jailbreak attacks continue to circumvent built-in safety mechanisms, exploiting carefully crafted scenarios or tokens, the safety risks of LLMs have come into focus. While numerous defense strategies--such as prompt detection, modification, and model fine-tuning--have been proposed to counter these attacks, a critical question arises: do these defenses compromise the utility and usability of LLMs for legitimate users? Existing research predominantly focuses on the effectiveness of defense strategies without thoroughly examining their impact on performance, leaving a gap in understanding the trade-offs between LLM safety and performance. Our research addresses this gap by conducting a comprehensive study on the utility degradation, safety elevation, and exaggerated-safety escalation of LLMs with jailbreak defense strategies. We propose USEBench, a novel benchmark designed to evaluate these aspects, along with USEIndex, a comprehensive metric for assessing overall model performance. Through experiments on seven state-of-the-art LLMs, we found that mainstream jailbreak defenses fail to ensure both safety and performance simultaneously. Although model-finetuning performs the best overall, their effectiveness varies across LLMs. Furthermore, vertical comparisons reveal that developers commonly prioritize performance over safety when iterating or fine-tuning their LLMs.

While current Computer Use Agent (CUA) benchmarks measure task completion effectively, they provide limited assessment of enterprise deployment readiness, emphasizing functional correctness over the operational reliability required for production systems. We present UI-CUBE (UiPath Computer Use BEnchmark), a systematic benchmark comprising 226 tasks across two difficulty tiers designed to expose fundamental architectural limitations in current CUAs. Our evaluation covers simple UI interactions (136 tasks) and complex workflows including copy-paste tasks (50 tasks) and enterprise application scenarios (40 tasks), with systematic interface variation coverage, multi-resolution testing and automated validation of task success through the application state. Evaluation of five state-of-the-art models reveals a sharp capability cliff rather than gradual performance degradation. Simple UI interactions achieve 67-85% success rates (compared to 97.9% human performance), but complex workflows drop precipitously to 9-19%. Human evaluators with no prior application experience achieve only 61.2% on complex tasks despite near-perfect performance on simple tasks, establishing realistic performance ceilings. This discontinuous performance pattern -- where agents achieve 68-87% of human performance on simple tasks but only 15-32% on complex workflows -- indicates fundamental architectural limitations in memory management, hierarchical planning, and state coordination rather than incremental capability gaps addressable through better training or prompting. UI-CUBE functions as an enterprise-readiness diagnostic, revealing that while current CUAs can manipulate individual interface elements, they cannot yet function as reliable workflow automation tools. These findings provide architectural insights essential for developing production-ready CUAs capable of managing complex, multi-step enterprise processes.

We systematically investigate all 25 public ARC-AGI-3 games and find that every one is reachable through non-intelligent strategies: 10 in a single blind step, 5 after one probing action, 1 via repeated ACTION1 presses, 1 via diverse exploration, and 8 via single repeated actions with sufficient budget (50-200 steps). A library-level null-coordinate vulnerability additionally bypasses 18 games in 1 step. This benchmark critique implies the public evaluation set cannot discriminate intelligent exploration from trivial heuristics - the private 55-game evaluation is the only genuine intelligence test. Against this backdrop, we present AERA (Adaptive Epistemic Reasoning Agent), a three-phase (EXPLORE / VERIFY / PLAN) agent achieving RHAE=0.2116 (4/25 solved) on these 25 games with Qwen2.5-0.5B, while random and no-explore baselines score 0.0000. We formalise AERA through a Speed--Depth trade-off framework: under a convexity assumption (proved for a class of environments in the Appendix), RHAE's quadratic form emerges as a second-order penalty for deviating from the Pareto frontier between action efficiency and information gain. Contributions: (i) a benchmark validity analysis showing that current interactive reasoning benchmarks fail to measure the exploration they claim to require, and (ii) the EXPLORE-before-PLAN framework and model-capability x exploration interaction. The linked code track entry achieves RHAE=0.30 on the full 55-game private evaluation. Code: CC0.

Mobile graphical user interface (GUI) agents have demonstrated remarkable capabilities in automating complex tasks, yet they introduce critical safety risks where a single erroneous action can lead to irreversible consequences. Existing safety mechanisms are primarily reactive, lacking the ability to assess risks before execution. In this paper, we introduce SeerGuard, a consequence-aware safety framework designed to mitigate these risks through pre-execution instruction-level screening and action-level risk assessment. Specifically, the action-level assessment analyzes agent-proposed actions within current GUI states, anticipating likely outcomes to identify risks before they are executed. To enable these capabilities, we construct a unified safety-augmented world model (SAWM) via multi-task learning, integrating semantic next-state prediction with safety risk assessment. Extensive experiments demonstrate that SeerGuard generalizes effectively across diverse mobile GUI agents. On Qwen3-VL-8B-Instruct, it increases the safety-utility score from 0.191 to 0.596 at ω=0.8 and reduces the risk-cost score from 0.347 to 0.130 at α=0.8. Further analyses on our SAWM validate the effectiveness of the instruction-level screening, alongside the capability of action risk assessment and next-state prediction.

Gait disorders are commonly observed in older adults, who frequently experience various issues related to walking. Additionally, researchers and clinicians extensively investigate mobility related to gait in typically and atypically developing children, athletes, and individuals with orthopedic and neurological disorders. Effective gait analysis enables the understanding of the causal mechanisms of mobility and balance control of patients, the development of tailored treatment plans to improve mobility, the reduction of fall risk, and the tracking of rehabilitation progress. However, analyzing gait data is a complex task due to the multivariate nature of the data, the large volume of information to be interpreted, and the technical skills required. Existing tools for gait analysis are often limited to specific patient groups (e.g., cerebral palsy), only handle a specific subset of tasks in the entire workflow, and are not openly accessible. To address these shortcomings, we conducted a requirements assessment with gait practitioners (e.g., researchers, clinicians) via surveys and identified key components of the workflow, including (1) data processing and (2) data analysis and visualization. Based on the findings, we designed VIGMA, an open-access visual analytics framework integrated with computational notebooks and a Python library, to meet the identified requirements. Notably, the framework supports analytical capabilities for assessing disease progression and for comparing multiple patient groups. We validated the framework through usage scenarios with experts specializing in gait and mobility rehabilitation. VIGMA is available at https://github.com/komar41/VIGMA.

Recursive self-improvement requires turning evidence of model failures into better models. Data-centric post-training research entails diagnosing capability gaps, designing and validating training-data strategies, and learning from checkpoint feedback. Can LLM agents automate this loop? Existing benchmarks entangle research decisions with optimization, serving, evaluation, and systems implementation, obscuring agents' research capability. We introduce RSIBench-Data, a controlled benchmark of LLM agents as data-centric researchers with a fixed post-training stack. Agents iteratively revise training-data strategies for a fixed target model; training and serving use Tinker-backed services, official evaluation runs through Harbor and E2B sandboxes, and budgets are fixed across agents. We evaluate four frontier agents on six benchmarks across software engineering, terminal use, scientific question answering, and mathematics. Agents demonstrate core data-centric research capabilities: in 58.33\% of settings, they improve upon the first valid attempt by refining strategies from feedback. However, improvement is inconsistent. Among searches continuing after the best observed score, 78.26\% end with a lower-scoring final attempt, while the rest only recover the same peak. A strong candidate may therefore appear early or midway through a run even as later revisions fail. Trajectory analysis identifies four patterns in stronger runs: accurate hypotheses, validation-grounded supervision, behavior-aligned data, and preservation of strong checkpoints. These findings suggest that current agents can make useful data-centric discoveries but cannot yet translate feedback into consistent improvements. RSIBench-Data provides a measurable, auditable testbed for the research capabilities required for recursive self-improvement. We open-source our code at https://github.com/evolvent-ai/RSIBench-Data.

The Model Context Protocol (MCP) has rapidly emerged as a universal standard for connecting AI assistants to external tools and data sources. While MCP simplifies integration between AI applications and various services, it introduces significant security vulnerabilities, particularly on the client side. In this work we conduct threat modelings of MCP implementations using STRIDE (Spoofing, Tampering, Repudiation, Information Disclosure, Denial of Service, Elevation of Privilege) and DREAD (Damage, Reproducibility, Exploitability, Affected Users, Discoverability) frameworks across five key components: (1) MCP Host and Client, (2) LLM, (3) MCP Server, (4) External Data Stores, and (5) Authorization Server. This comprehensive analysis reveals tool poisoning-where malicious instructions are embedded in tool metadata-as the most prevalent and impactful client-side vulnerability. We therefore focus our empirical evaluation on this critical attack vector, providing a systematic comparison of how seven major MCP clients validate and defend against tool poisoning attacks. Our analysis reveals significant security issues with most tested clients due to insufficient static validation and parameter visibility. We propose a multi-layered defense strategy encompassing static metadata analysis, model decision path tracking, behavioral anomaly detection, and user transparency mechanisms. This research addresses a critical gap in MCP security, which has primarily focused on server-side vulnerabilities, and provides actionable recommendations and mitigation strategies for securing AI agent ecosystems.

Software engineering tools increasingly rely on LLM based agents to localize files to change to resolve a software issue. Most AI agents explore repositories linearly, that is, visiting one directory or file per step. We postulate that this is a structural mismatch for changes that span several subsystems. We compare linear sequential exploration against non-linear, domain-scoped parallel agentic exploration. Using SWE Bench Pro as initial benchmark, we focus on ansible as an exemplar. We construct an approach for persistent-session evaluation of GitHub issues anchored at a single base commit. We compare our non-linear domain-agent file traversal system against a base LLM without direct repository access, a single agent Recursive Language Model (RLM) baseline with a persistent Python REPL and an external CLI baseline using Codex 5.5 High. Domain scoped parallel agent spawning with a small Haiku-class model achieves the highest micro F1 among Haiku class models by a large margin. Domain-agents is the second highest behind only the much larger Codex 5.5 High on our own expanded benchmark including over more recent PRs from 2025 and 2026. On the original, curated, 2020 SWE-bench Pro benchmark, a larger Sonnet plain LLM baseline attains higher micro F1 by predicting few files, leading to higher precision, but at significantly lower all gold recall. We also present three additional findings. First, documentation evolution is a latent dependency unresolved by any approach. Second, naive file system access can degrade localization driven by test-file over prediction. Lastly, forced multi-agent consultation does not measurably help and raises token cost substantially.

Following the advancement of large language models (LLMs), the development of LLM-based autonomous agents has become increasingly prevalent. As a result, the need to understand the security vulnerabilities of these agents has become a critical task. We examine how ReAct agents can be exploited using a straightforward yet effective method we refer to as the foot-in-the-door attack. Our experiments show that indirect prompt injection attacks, prompted by harmless and unrelated requests (such as basic calculations) can significantly increase the likelihood of the agent performing subsequent malicious actions. Our results show that once a ReAct agents thought includes a specific tool or action, the likelihood of executing this tool in the subsequent steps increases significantly, as the agent seldom re-evaluates its actions. Consequently, even random, harmless requests can establish a foot-in-the-door, allowing an attacker to embed malicious instructions into the agents thought process, making it more susceptible to harmful directives. To mitigate this vulnerability, we propose implementing a simple reflection mechanism that prompts the agent to reassess the safety of its actions during execution, which can help reduce the success of such attacks.

We introduce IMPACT, a synchronized five-view RGB-D dataset for deployment-oriented industrial procedural understanding, built around real assembly and disassembly of a commercial angle grinder with professional-grade tools. To our knowledge, IMPACT is the first real industrial assembly benchmark that jointly provides synchronized ego-exo RGB-D capture, decoupled bimanual annotation, compliance-aware state tracking, and explicit anomaly--recovery supervision within a single real industrial workflow. It comprises 112 trials from 13 participants totaling 39.5 hours, with multi-route execution governed by a partial-order prerequisite graph, a six-category anomaly taxonomy, and operator cognitive load measured via NASA-TLX. The annotation hierarchy links hand-specific atomic actions to coarse procedural steps, component assembly states, and per-hand compliance phases, with synchronized null spans across views to decouple perceptual limitations from algorithmic failure. Systematic baselines reveal fundamental limitations that remain invisible to single-task benchmarks, particularly under realistic deployment conditions that involve incomplete observations, flexible execution paths, and corrective behavior. The full dataset, annotations, and evaluation code are available at https://github.com/Kratos-Wen/IMPACT.

A latent world model may achieve accurate short-horizon prediction while still inducing a latent space that is poorly aligned with planning. A key issue is spatiotemporal mismatch: these models are often trained with local predictive supervision, but deployed for long-horizon goal-directed search in latent spaces where Euclidean distance may not reflect what is reachable within a finite action budget. We present the Reachability-Correction auxiliary objective (RC-aux), a lightweight correction for this mismatch in reconstruction-free latent world models. RC-aux keeps the world-model backbone unchanged and adds planning-aligned supervision along two axes. Along the time axis, multi-horizon open-loop prediction trains the model beyond one-step consistency. Along the space axis, budget-conditioned reachability supervision, together with temporal hard negatives, encourages the latent space to distinguish states that are eventually reachable from those reachable within the current planning horizon. At test time, the learned reachability signal can also be used by a reachability-aware planner to favor trajectories that are both goal-directed and attainable under the available budget. We instantiate RC-aux on LeWorldModel and evaluate it under both continuation-training and matched-from-scratch settings. Across goal-conditioned pixel-control tasks and a LIBERO-Goal extension, RC-aux improves LeWM-style planning with modest additional cost. These results suggest that planning with latent world models depends not only on predictive accuracy, but also on whether the learned representation encodes the temporal and geometric structure required by downstream search. The code is available at https://github.com/Guang000/RC-aux.

Agents are deployed in applications from trip planners and stock trading to IT incident triage. In most cases, LLM agents work autonomously with minimal rule-based safeguarding, leading to cost and safety issues from irreversible actions. Recent works resolve this either by using a safeguard agent to monitor behavior or evaluating logs post-hoc. The first adds cost and latency to every step; the second delivers its verdict after the run, when tokens are burned and damage is done. To overcome this, we propose OnTrack, a streaming monitoring mechanism that compares an agent's steps and dependencies against recorded successful runs to alert users or block the agent in about a millisecond per step. We study this problem in three regimes of decreasing access: full reference access (historical runs and tool schemas), intermediate access (only tool schemas), and no prior knowledge (only step logs as generated). Expectation of OnTrack's monitoring capabilities reduces as data access drops, ranging from plan violation detection to identifying loops, stalls, and repeated tool calls. Finally, we evaluate OnTrack using SWE-bench trajectories. Based on the first 8 steps, our method ranks failing trajectories below succeeding ones better than content similarity approaches (+0.057 AUROC). With an abort policy, we save about 18% of compute that would be burned on failing runs, where 83% of interrupted runs were actually heading to failure (5 out of 6 aborts were correct).

Large language model agents increasingly act through terminals, yet existing surveys disperse terminal-mediated behavior across software engineering, tool use, and computer-use research. We regard terminal agents as systems whose dominant progress-bearing action--observation loop is mediated by terminal command execution, textual feedback, and stateful environment interaction. Using terminal-mediated execution as an organizing lens, this survey establishes workload-level boundaries and connects system architecture, competence acquisition, and evaluation through a seven-dimensional terminal competence profile. Our synthesis shows that realized behavior is jointly shaped by the model, interface, harness, runtime, and environment. Executable trajectories ground learning in action consequences, verification, and recovery, whereas prevailing evaluations emphasize final outcomes and expose process quality, recovery, and governance unevenly. Bounded fixed-condition diagnostics illustrate two implications: benchmark families expose different process signals, and matched system comparisons reveal benchmark-dependent performance and limits of component attribution. These findings motivate explicit reporting of system and runtime conditions, supported by replayable traces and process-level evidence. The framework provides a unified basis for studying terminal-mediated agency across software engineering and emerging application domains.

Stable locomotion in precipitous environments is an essential capability of quadruped robots, demanding the ability to resist various external disturbances. However, recent learning-based policies only use basic domain randomization to improve the robustness of learned policies, which cannot guarantee that the robot has adequate disturbance resistance capabilities. In this paper, we propose to model the learning process as an adversarial interaction between the actor and a newly introduced disturber and ensure their optimization with H_{infty} constraint. In contrast to the actor that maximizes the discounted overall reward, the disturber is responsible for generating effective external forces and is optimized by maximizing the error between the task reward and its oracle, i.e., "cost" in each iteration. To keep joint optimization between the actor and the disturber stable, our H_{infty} constraint mandates the bound of ratio between the cost to the intensity of the external forces. Through reciprocal interaction throughout the training phase, the actor can acquire the capability to navigate increasingly complex physical disturbances. We verify the robustness of our approach on quadrupedal locomotion tasks with Unitree Aliengo robot, and also a more challenging task with Unitree A1 robot, where the quadruped is expected to perform locomotion merely on its hind legs as if it is a bipedal robot. The simulated quantitative results show improvement against baselines, demonstrating the effectiveness of the method and each design choice. On the other hand, real-robot experiments qualitatively exhibit how robust the policy is when interfering with various disturbances on various terrains, including stairs, high platforms, slopes, and slippery terrains. All code, checkpoints, and real-world deployment guidance will be made public.

Vision-Language-Action (VLA) models have demonstrated remarkable capabilities in generalizing across diverse robotic manipulation tasks. However, deploying these models in unstructured environments remains challenging due to the critical need for simultaneous task compliance and safety assurance, particularly in preventing potential collisions during physical interactions. In this work, we introduce a Vision-Language-Safe Action (VLSA) architecture, named AEGIS, which contains a plug-and-play safety constraint (SC) layer formulated via control barrier functions. AEGIS integrates directly with existing VLA models to improve safety with theoretical guarantees, while maintaining their original instruction-following performance. To evaluate the efficacy of our architecture, we construct a comprehensive safety-critical benchmark SafeLIBERO, spanning distinct manipulation scenarios characterized by varying degrees of spatial complexity and obstacle intervention. Extensive experiments demonstrate the superiority of our method over state-of-the-art baselines. Notably, AEGIS achieves a 59.16% improvement in obstacle avoidance rate while substantially increasing the task execution success rate by 17.25%. To facilitate reproducibility and future research, we make our code, models, and the benchmark datasets publicly available at https://vlsa-aegis.github.io/.

AI agents -- systems that combine foundation models with reasoning, planning, memory, and tool use -- are rapidly becoming a practical interface between natural-language intent and real-world computation. This survey synthesizes the emerging landscape of AI agent architectures across: (i) deliberation and reasoning (e.g., chain-of-thought-style decomposition, self-reflection and verification, and constraint-aware decision making), (ii) planning and control (from reactive policies to hierarchical and multi-step planners), and (iii) tool calling and environment interaction (retrieval, code execution, APIs, and multimodal perception). We organize prior work into a unified taxonomy spanning agent components (policy/LLM core, memory, world models, planners, tool routers, and critics), orchestration patterns (single-agent vs.\ multi-agent; centralized vs.\ decentralized coordination), and deployment settings (offline analysis vs.\ online interactive assistance; safety-critical vs.\ open-ended tasks). We discuss key design trade-offs -- latency vs.\ accuracy, autonomy vs.\ controllability, and capability vs.\ reliability -- and highlight how evaluation is complicated by non-determinism, long-horizon credit assignment, tool and environment variability, and hidden costs such as retries and context growth. Finally, we summarize measurement and benchmarking practices (task suites, human preference and utility metrics, success under constraints, robustness and security) and identify open challenges including verification and guardrails for tool actions, scalable memory and context management, interpretability of agent decisions, and reproducible evaluation under realistic workloads.

We develop and counterfactually evaluate a resolution-aware risk-design framework (PIRAP) for perpetual futures whose underlying tracks a single binary prediction-market probability through resolution. The framework specifies six components: an index estimator combining mid-price, depth-weighted mid, and time-decayed VWAP; jump-aware tiered margin sized against bounded-event terminal-collapse magnitude; leverage compression schedule contracting toward resolution; resolution-aware funding rule with boundary-aware correction; a multi-stage halt protocol; and an eligibility framework. Two formal non-portability propositions establish that standard basis-only funding paired with continuous-vol static margin fails on bounded-event underlyings. Empirical evaluation uses Polymarket's PMXT v2 archive for 2026-04-21 to 2026-04-27 (13,298-market analysis sample passing adequacy gates from 61,087 ingested; 13,115 resolved within the empirical window for E3). E1 evaluates two pre-registered stylized facts; E2 conducts counterfactual replay across three engine configurations; E3 isolates the resolution-zone protocol's contribution. Results are mixed. Five pre-registered floors: stylized-fact floors (boundary depth asymmetry, terminal-jump magnitude) PASS; welfare-side directional floors (final-hour liquidation -6%, drawdown -5.1% pooled, median PnL +14%) two FAIL one PASS; E3 mechanic floors (final-hour liquidation -80% by halt construction PASS; bad-debt frequency +2.4% FAIL). Three of five materiality floors fail: the framework as specified does not validate deployment, but the empirical record establishes a halt-versus-margin scope distinction (halt addresses execution-channel risk; terminal-jump bad-debt remains margin-side) and documents a pre-emption trade-off constraining the dynamic-margin component. The paper concludes with structural recommendations and explicit non-deployable status.

Path-velocity decomposition is an intuitive yet powerful approach to address the complexity of kinodynamic motion planning. The difficult trajectory planning problem is solved in two separate, simpler, steps: first, find a path in the configuration space that satisfies the geometric constraints (path planning), and second, find a time-parameterization of that path satisfying the kinodynamic constraints. A fundamental requirement is that the path found in the first step should be time-parameterizable. Most existing works fulfill this requirement by enforcing quasi-static constraints in the path planning step, resulting in an important loss in completeness. We propose a method that enables path-velocity decomposition to discover truly dynamic motions, i.e. motions that are not quasi-statically executable. At the heart of the proposed method is a new algorithm -- Admissible Velocity Propagation -- which, given a path and an interval of reachable velocities at the beginning of that path, computes exactly and efficiently the interval of all the velocities the system can reach after traversing the path while respecting the system kinodynamic constraints. Combining this algorithm with usual sampling-based planners then gives rise to a family of new trajectory planners that can appropriately handle kinodynamic constraints while retaining the advantages associated with path-velocity decomposition. We demonstrate the efficiency of the proposed method on some difficult kinodynamic planning problems, where, in particular, quasi-static methods are guaranteed to fail.

Vision-language models (VLMs) are increasingly deployed in multi-agent systems to automate complex computer-use workflows, yet existing benchmarks mostly assume consistent, cooperative environments. In contrast, real-world collaboration rarely runs on consistent information: peer or sub-agents frequently report outdated states, issue contradictory instructions, or compete over shared permissions and files, forcing agents to check others' outputs and verify ground truth in the environment. Evaluating such conflict resolution remains challenging: manual authoring cannot scale across complex systems, while unconstrained LLM generation produces narrative drift, answer leakage, and unsatisfiable rubrics. We introduce CLASHarness (Conflict-Loaded Agent Scenario Harness), a controllable framework for generating verifiable multi-agent conflicts in computer use, with a benchmark of 600 multi-round tasks. By combining hierarchical scenario planning with an eight-step verified micro-pipeline, CLASHarness pre-commits decisive visual facts before rendering and compiles hybrid code and semantic graders directly from executed reference trajectories, guaranteeing every task is solvable by construction. Evaluating 15 frontier models on CLASHarness reveals three core bottlenecks. First, when sub-agent outputs conflict with the environment, weaker models blindly follow misleading information, whereas stronger models inspect visual evidence to verify ground truth. Second, resolving conflicts is much harder than finding them: while agents can spot inconsistencies, actively fixing system state drops task success significantly. Third, coordination protocols remain a universal bottleneck: even frontier models fail over 58% of closing actions, often forgetting to release shared locks or hand off tasks. CLASHarness provides a scalable, verifiable foundation for building reliable multi-agent systems.

As large language model agents increasingly operate autonomously with access to tools and external environments, ensuring their safe and reliable behavior becomes critical. We present GuardianAgentBench (GABench), a benchmark of 580 scenarios across six domains evaluated on three production-ready frameworks: LangChain, LlamaIndex, and Vectara. The benchmark incorporates rigorous multi-stage validation and five adversarial attack modes. Experiments with six state-of-the-art models reveal that even the strongest configuration achieves only 74.8% overall accuracy and expose two distinct failure regimes: stronger models under-call required tools, while weaker models mis-select and over-call tools. Performance degrades monotonically with both tool-set size and sequential turn depth, with long-horizon planning proving the steeper bottleneck. Our guardrail implementation consistently outperforms system-prompt-based defenses across all models, recovering 19.9% of failures at a false positive rate of just 0.5%. These results demonstrate that execution-time structural intervention improves safety without disrupting correct agent behavior.

The rapid advancement of Large Language Models (LLMs) has created new opportunities for Automated Penetration Testing (AutoPT), spawning numerous frameworks aimed at achieving end-to-end autonomous attacks. However, despite the proliferation of related studies, existing research generally lacks systematic architectural analysis and large-scale empirical comparisons under a unified benchmark. Therefore, this paper presents the first Systematization of Knowledge (SoK) focusing on the architectural design and comprehensive empirical evaluation of current LLM-based AutoPT frameworks. At systematization level, we comprehensively review existing framework designs across six dimensions: agent architecture, agent plan, agent memory, agent execution, external knowledge, and benchmarks. At empirical level, we conduct large-scale experiments on 13 representative open-source AutoPT frameworks and 2 baseline frameworks utilizing a unified benchmark. The experiments consumed over 10 billion tokens in total and generated more than 1,500 execution logs, which were manually reviewed and analyzed over four months by a panel of more than 15 researchers with expertise in cybersecurity. By investigating the latest progress in this rapidly developing field, we provide researchers with a structured taxonomy to understand existing LLM-based AutoPT frameworks and a large-scale empirical benchmark, along with promising directions for future research.

Production LLM-agent frameworks expose control primitives -- human-in-the-loop approval gates, run cancellation, and execution timeouts -- whose names and documentation imply barrier semantics: while a run is paused, cancelled, or timed out, no gated side effect executes. We show this implied contract holds on none of the six widely used open-source frameworks we test. Model-free differential probes isolate a recurring sibling leak -- an approval gate suspends its own branch while a sibling branch's effect executes during the pause, so a later rejection cannot prevent it -- in every framework shipping a pre-execution gate (five of six), plus three further gaps: replay double-execution, cancellation orphans, and timeout zombies. The hazard is reachable, not merely constructible: under an a-priori-fixed protocol, frontier models emit the leak-triggering plan shape at pooled rates up to 14%, and when live models drive the unmodified frameworks under an approval pause, 215 of 1,200 runs execute their effect during the pause, across three schedulers and two language runtimes. To repair the measured gaps we present SOUNDGATE, an environment-external effect gate in Rust through which every side effect must be admitted, enforcing hold-until-decided, reject-cancels, dedup-on-replay, and fence-on-cancel -- one property per violation class -- under a stated complete-mediation contract discharged for network egress by kernel-enforced routes. We verify the properties over a model of the admission core (Verus; TLA+/TLC, exhaustive to 7.5e7 states; TLAPS), model-check the deployed Rust with Loom, and bridge model to code by differential conformance over 1.2e7 operations -- refinement evidence, not a mechanized proof. SOUNDGATE blocks every measured violation end-to-end on all six frameworks while releasing legitimate effects, at about 1 ms admission per write and 12k-26k durable admissions per second.

Reinforcement learning offers the prospect of a reusable sequential decision-making mechanism for spacecraft trajectory design, motivating policy interfaces that connect learned decisions to the underlying maneuver geometry. This paper develops Reachability Analysis-Informed Reinforcement Learning (RARL) for deterministic multi-impulse interplanetary transfers, placing intermediate waypoint selection at the center of the learned decision process. Local first-order reachability maps bounded velocity perturbations into an ellipsoidal set of next-node positions, within which the policy selects its waypoint. Lambert reconstruction then determines the corresponding maneuver to reach this selected waypoint along a dynamically consistent ballistic arc, coupling learned transfer-geometry selection with classical astrodynamics. A terminal two-impulse reconstruction completes the rendezvous, supported by a linear maneuver-demand assessment used for reward shaping. Numerical studies characterize this interface on a two-body Earth-Mars benchmark. Across three independent training runs, RARL achieves a mean maneuver cost of 10.23 km/s, 1.72% above a validated local sequential convex programming reference. Training over dispersed initial states extends policy reuse across a departure family with fixed target state and transfer duration. Each of the three independently trained multi-state policies completes all 10,000 held-out Monte Carlo departures without impulse-cap violations, compared with a mean feasibility rate of 6.49% for single-state policies. This broader sampled feasibility is accompanied by a 0.61% increase in mean nominal maneuver cost, without further training across departures. These results demonstrate that a reachability-informed decision interface supports benchmark-quality trajectory construction and policy reuse across dispersed departure conditions.

Unknown dynamic load carrying is one important practical application for quadruped robots. Such a problem is non-trivial, posing three major challenges in quadruped locomotion control. First, how to model or represent the dynamics of the load in a generic manner. Second, how to make the robot capture the dynamics without any external sensing. Third, how to enable the robot to interact with load handling the mutual effect and stabilizing the load. In this work, we propose a general load modeling approach called load characteristics modeling to capture the dynamics of the load. We integrate this proposed modeling technique and leverage recent advances in Reinforcement Learning (RL) based locomotion control to enable the robot to infer the dynamics of load movement and interact with the load indirectly to stabilize it and realize the sim-to-real deployment to verify its effectiveness in real scenarios. We conduct extensive comparative simulation experiments to validate the effectiveness and superiority of our proposed method. Results show that our method outperforms other methods in sudden load resistance, load stabilizing and locomotion with heavy load on rough terrain. https://leixinjonaschang.github.io/leggedloadadapt.github.io/{Project Page}.

In January 2026, the open-source agent framework OpenClaw and the agent-only social network Moltbook produced a large-scale dataset of autonomous AI-to-AI interaction, attracting six academic publications within fourteen days. This study conducts a multivocal literature review of that ecosystem and presents ClawdLab, an open-source platform for autonomous scientific research, as a design science response to the architectural failure modes identified. The literature documents emergent collective phenomena, security vulnerabilities spanning 131 agent skills and over 15,200 exposed control panels, and five recurring architectural patterns. ClawdLab addresses these failure modes through hard role restrictions, structured adversarial critique, PI-led governance, multi-model orchestration, and domain-specific evidence requirements encoded as protocol constraints that ground validation in computational tool outputs rather than social consensus; the architecture provides emergent Sybil resistance as a structural consequence. A three-tier taxonomy distinguishes single-agent pipelines, predetermined multi-agent workflows, and fully decentralised systems, analysing why leading AI co-scientist platforms remain confined to the first two tiers. ClawdLab's composable third-tier architecture, in which foundation models, capabilities, governance, and evidence requirements are independently modifiable, enables compounding improvement as the broader AI ecosystem advances.

Computer Use Agents (CUAs) translate natural-language instructions into Graphical User Interface (GUI) actions such as clicks, keystrokes, and scrolls by relying on a Vision-Language Model (VLM) to interpret screenshots and predict grounded tool calls. However, grounding accuracy varies dramatically across VLMs, while current CUA systems typically route every action to a single fixed model regardless of difficulty. We propose Adaptive VLM Routing (AVR), a framework that inserts a lightweight semantic routing layer between the CUA orchestrator and a pool of VLMs. For each tool call, AVR estimates action difficulty from multimodal embeddings, probes a small VLM to measure confidence, and routes the action to the cheapest model whose predicted accuracy satisfies a target reliability threshold. For warm agents with memory of prior UI interactions, retrieved context further narrows the capability gap between small and large models, allowing many actions to be handled without escalation. We formalize routing as a cost--accuracy trade-off, derive a threshold-based policy for model selection, and evaluate AVR using ScreenSpot-Pro grounding data together with the OpenClaw agent routing benchmark. Across these settings, AVR projects inference cost reductions of up to 78\% while staying within 2 percentage points of an all-large-model baseline. When combined with the Visual Confused Deputy guardrail, AVR also escalates high-risk actions directly to the strongest available model, unifying efficiency and safety within a single routing framework. Materials are also provided Model, benchmark, and code: https://github.com/vllm-project/semantic-router.

AI coding agents now read repositories, call tools, and execute shell commands with limited human oversight, and a fast-growing body of work studies whether the execution layer around them is actually safe. That literature is scattered. Papers on sandbox isolation, capability and access control, policy enforcement, time-of-check-to-time-of-use (TOCTOU) races, Model Context Protocol (MCP) threats, identity delegation, execution provenance, network egress control, and static analysis of agent-generated code are published independently and rarely cite one another. We systematize 39 papers published between 2023 and 2026 into 17 categories, each verified directly against its source. The same verification protocol also confirms four disclosed, patched CVEs directly affecting production agent harnesses. Reading across categories surfaces five cross-cutting gaps that no single paper addresses. (1) Isolation architectures and capability models are almost never evaluated against one another on a shared benchmark. (2) Policy-enforcement studies report failure rates from 69% to 98% of real denylists, yet no isolation paper re-evaluates its own defense under that adversarial setting. (3) TOCTOU and MCP threats are analyzed as separate literatures despite both being instances of the same state-validation problem. (4) Every enforcement mechanism assumes an honest policy author, leaving policy-authoring error itself unaddressed. (5) Benign but out-of-scope agent actions occurring at rates up to 17.1% under realistic prompting are addressed by no access-control or capability paper in the corpus. Existing broader surveys of agentic AI security discuss sandboxing only as one item among many defenses, leaving execution security without a dedicated systematization. This paper is written to fill that gap. We conclude with a research agenda directed at the five gaps.

Explaining an inferred fact under rule evaluation can require identifying the inclusion-minimal input sets that suffice for the inference and the deletions that make the fact disappear. For a fixed union of conjunctive queries, every minimal support is bounded by the query body. For recursive rules, the same answer may depend on large supports, and the number of minimal supports may be exponential in the input. We study the gap through deletion-based explanation, using inclusion-minimal endogenous input facts that entail the atom together with fixed background facts. We organize these supports as a hypergraph and prove that it determines actual causes, counterfactual causes, responsibility, and deletion robustness. The resulting view separates nonrecursive queries from recursive Datalog at the level of minimal input explanations. For positive-length reachability, minimal supports are exactly simple directed paths, and deletion robustness is the minimum directed edge cut. We also prove invariance under fixed-goal equivalent positive Datalog programs and an NP-hardness calibration for the robustness threshold problem.

We present semi-supervised deep learning approaches for traversability estimation from fisheye images. Our method, GONet, and the proposed extensions leverage Generative Adversarial Networks (GANs) to effectively predict whether the area seen in the input image(s) is safe for a robot to traverse. These methods are trained with many positive images of traversable places, but just a small set of negative images depicting blocked and unsafe areas. This makes the proposed methods practical. Positive examples can be collected easily by simply operating a robot through traversable spaces, while obtaining negative examples is time consuming, costly, and potentially dangerous. Through extensive experiments and several demonstrations, we show that the proposed traversability estimation approaches are robust and can generalize to unseen scenarios. Further, we demonstrate that our methods are memory efficient and fast, allowing for real-time operation on a mobile robot with single or stereo fisheye cameras. As part of our contributions, we open-source two new datasets for traversability estimation. These datasets are composed of approximately 24h of videos from more than 25 indoor environments. Our methods outperform baseline approaches for traversability estimation on these new datasets.

Automated Theorem Proving (ATP) faces challenges due to its complexity and computational demands. Recent work has explored using Large Language Models (LLMs) for ATP action selection, but these methods can be resource-intensive. This study introduces FEAS, an agent that enhances the COPRA in-context learning framework within Lean. FEAS refines prompt generation, response parsing, and incorporates domain-specific heuristics for functional equations. It introduces FunEq, a curated dataset of functional equation problems with varying difficulty. FEAS outperforms baselines on FunEq, particularly with the integration of domain-specific heuristics. The results demonstrate FEAS's effectiveness in generating and formalizing high-level proof strategies into Lean proofs, showcasing the potential of tailored approaches for specific ATP challenges.

We study environment scaling as a way to increase agent-benchmark difficulty while holding core task objectives fixed. Our framework, Recursive Environment Scaling (RES), transforms existing benchmark environments while preserving their objectives and completion requirements. A proposer changes information access, resource relations, and execution dependencies; execution-grounded checks validate the resulting candidate, and accepted changes are inherited across rounds. This produces related environments for paired evaluation and training-trajectory collection. Experiments on 294 initial tasks from three benchmarks show lower task success for all six evaluation models, with decreases of 57.14--77.14 percentage points on Claw-Eval-Live. With equal trajectory counts and identical optimization settings, fine-tuning on RES trajectories outperforms original-trajectory SFT in all nine model--benchmark comparisons by 7.00--14.61 percentage points. Ablations identify recursive inheritance and dependency composition as important contributors to increased difficulty. Together, these results support environment scaling for both agent evaluation and training.

LLM-based agents execute multi-step tasks, but their behavioral structure remains opaque: long unstructured traces resist the safety auditing and runtime monitoring that deployment requires. Existing approaches operate per-trace or success-only, so they miss the cross-run topology that links next-step and failure prediction. To recover that shared structure, we collapse an entire trace corpus into a single, compact finite-state machine (FSM) that serves as a structural substrate for the otherwise unpredictable behavior of LLM agents. Across twelve public datasets, the FSMs are compact (7-43 states), replay held-out data at >=0.997 fitness with near-identical topology across splits, and build in milliseconds. This substrate addresses both prediction goals. For next-step prediction, FSM-state context outperforms Agent Workflow Memory on every ground-truth-matched dataset. For failure prediction, per-state behavioral features reach held-out AUROC up to 0.94, and an online monitor ranks failing runs above passing ones from a partial trace, triggering early stopping well before completion. Behavioral topology thus appears shaped more by the deployment harness than by the LLM, providing a model-agnostic structural primitive for safety auditing and runtime monitoring.

This paper presents a concrete and a symbolic rewriting logic semantics for parametric time Petri nets with inhibitor arcs (PITPNs), a flexible model of timed systems where parameters are allowed in firing bounds. We prove that our semantics is bisimilar to the "standard" semantics of PITPNs. This allows us to use the rewriting logic tool Maude, combined with SMT solving, to provide sound and complete formal analyses for PITPNs. We develop and implement a new general folding approach for symbolic reachability, so that Maude-with-SMT reachability analysis terminates whenever the parametric state-class graph of the PITPN is finite. Our work opens up the possibility of using the many formal analysis capabilities of Maude -- including full LTL model checking, analysis with user-defined analysis strategies, and even statistical model checking -- for such nets. We illustrate this by explaining how almost all formal analysis and parameter synthesis methods supported by the state-of-the-art PITPN tool Romeo can be performed using Maude with SMT. In addition, we also support analysis and parameter synthesis from parametric initial markings, as well as full LTL model checking and analysis with user-defined execution strategies. Experiments show that our methods outperform Romeo in many cases.

Autonomous systems, such as self-driving cars and drones, have made significant strides in recent years by leveraging visual inputs and machine learning for decision-making and control. Despite their impressive performance, these vision-based controllers can make erroneous predictions when faced with novel or out-of-distribution inputs. Such errors can cascade into catastrophic system failures and compromise system safety. In this work, we compute Neural Reachable Tubes, which act as parameterized approximations of Backward Reachable Tubes to stress-test the vision-based controllers and mine their failure modes. The identified failures are then used to enhance the system safety through both offline and online methods. The online approach involves training a classifier as a run-time failure monitor to detect closed-loop, system-level failures, subsequently triggering a fallback controller that robustly handles these detected failures to preserve system safety. For the offline approach, we improve the original controller via incremental training using a carefully augmented failure dataset, resulting in a more robust controller that is resistant to the known failure modes. In either approach, the system is safeguarded against shortcomings that transcend the vision-based controller and pertain to the closed-loop safety of the overall system. We validate the proposed approaches on an autonomous aircraft taxiing task that involves using a vision-based controller to guide the aircraft towards the centerline of the runway. Our results show the efficacy of the proposed algorithms in identifying and handling system-level failures, outperforming methods that rely on controller prediction error or uncertainty quantification for identifying system failures.

Large language models trained for safety and harmlessness remain susceptible to adversarial misuse, as evidenced by the prevalence of "jailbreak" attacks on early releases of ChatGPT that elicit undesired behavior. Going beyond recognition of the issue, we investigate why such attacks succeed and how they can be created. We hypothesize two failure modes of safety training: competing objectives and mismatched generalization. Competing objectives arise when a model's capabilities and safety goals conflict, while mismatched generalization occurs when safety training fails to generalize to a domain for which capabilities exist. We use these failure modes to guide jailbreak design and then evaluate state-of-the-art models, including OpenAI's GPT-4 and Anthropic's Claude v1.3, against both existing and newly designed attacks. We find that vulnerabilities persist despite the extensive red-teaming and safety-training efforts behind these models. Notably, new attacks utilizing our failure modes succeed on every prompt in a collection of unsafe requests from the models' red-teaming evaluation sets and outperform existing ad hoc jailbreaks. Our analysis emphasizes the need for safety-capability parity -- that safety mechanisms should be as sophisticated as the underlying model -- and argues against the idea that scaling alone can resolve these safety failure modes.

Safe offline RL is a promising way to bypass risky online interactions towards safe policy learning. Most existing methods only enforce soft constraints, i.e., constraining safety violations in expectation below thresholds predetermined. This can lead to potentially unsafe outcomes, thus unacceptable in safety-critical scenarios. An alternative is to enforce the hard constraint of zero violation. However, this can be challenging in offline setting, as it needs to strike the right balance among three highly intricate and correlated aspects: safety constraint satisfaction, reward maximization, and behavior regularization imposed by offline datasets. Interestingly, we discover that via reachability analysis of safe-control theory, the hard safety constraint can be equivalently translated to identifying the largest feasible region given the offline dataset. This seamlessly converts the original trilogy problem to a feasibility-dependent objective, i.e., maximizing reward value within the feasible region while minimizing safety risks in the infeasible region. Inspired by these, we propose FISOR (FeasIbility-guided Safe Offline RL), which allows safety constraint adherence, reward maximization, and offline policy learning to be realized via three decoupled processes, while offering strong safety performance and stability. In FISOR, the optimal policy for the translated optimization problem can be derived in a special form of weighted behavior cloning. Thus, we propose a novel energy-guided diffusion model that does not require training a complicated time-dependent classifier to extract the policy, greatly simplifying the training. We compare FISOR against baselines on DSRL benchmark for safe offline RL. Evaluation results show that FISOR is the only method that can guarantee safety satisfaction in all tasks, while achieving top returns in most tasks.