Daily Papers

Single-cell CRISPR screens run in many cell types are used to compare how cell types respond to perturbation, to train models that transfer effects between them and to score such models. These uses assume that cells carrying a guide RNA had their target knocked down. Yet cells grow for days before sequencing: when an essential gene is knocked down, knocked-down cells are depleted or stop dividing while cells that escaped knockdown keep growing, and the measured response, an average over all cells carrying the guide, is diluted. We define the escape fraction of a perturbation as the share of its measured cells whose target was not effectively knocked down, and estimate it from each cell's counts of the targeted gene with a two-group mixture that recovers known fractions in simulated mixtures. In most cell types the escape fraction rises with how essential the gene is, it is higher in a later screen of the same cells, and it reaches about half of the measured cells in human embryonic stem cells (hESCs). It predicts how much each response is diluted: the response size falls to (1 - e)^2 of that of the knocked-down cells. Because the escape fraction differs between cell types, it changes all three uses: hESCs respond like K562 cells unless knockdown depletes them, the coefficient a simple transfer model learns is lowered by the dilution of the cell type it predicts, and a benchmark scored on all cells rewards predictions shrunk towards no change, partly because that ground truth is itself diluted. Where cells stop dividing instead, the response also contains expression differences between cell-cycle stages. Response sizes should be compared on knocked-down cells or corrected for the escape fraction.

Single-cell perturbation screens are used to train and evaluate models that predict perturbation effects, and model scores are judged against how reproducible the measured effects are. Reproducibility is usually judged by splitting each perturbation's cells into two random halves. This assumes that the halves are independent replicates. In pooled screens such as Perturb-seq, however, the cells carrying a guide RNA descend from a limited number of transduced cells, so two random halves contain the same clones: pseudoreplication whose unit is not marked in the data. Using perturbations that should have no effect as controls, we compared random halves with independent replicates from separate transductions, and tested directly with halves that differ only in their clones. In a genome-scale screen of primary T cells, null perturbations agreed between random halves almost always and between independent replicates only half the time, the rate expected from noise alone; measuring more cells did not remove this agreement. Splitting the cells into halves that share no clone, by the T-cell receptor constant region or by a clone barcode, largely removed the excess agreement. Its size equals the share of expression differences set by clones divided by the effective number of clones per perturbation; across 16 screens it was largest in T cells transferred into mice and in a genome-scale primary T-cell screen, one to two orders of magnitude smaller in cell lines, and smallest in non-dividing neurons. Shared clones inflate benchmark ceilings and reliability labels, and when a model's input and its scoring answer come from one transduction, published models that predict perturbation effects in a new cell state appear better than a baseline that ignores the perturbation; against cells from another transduction, most fall below it. Reproducibility should be judged across separate transductions.

The introduction of genome engineering technology has transformed biomedical research, making it possible to make precise changes to genetic information. However, creating an efficient gene-editing system requires a deep understanding of CRISPR technology, and the complex experimental systems under investigation. While Large Language Models (LLMs) have shown promise in various tasks, they often lack specific knowledge and struggle to accurately solve biological design problems. In this work, we introduce CRISPR-GPT, an LLM agent augmented with domain knowledge and external tools to automate and enhance the design process of CRISPR-based gene-editing experiments. CRISPR-GPT leverages the reasoning ability of LLMs to facilitate the process of selecting CRISPR systems, designing guide RNAs, recommending cellular delivery methods, drafting protocols, and designing validation experiments to confirm editing outcomes. We showcase the potential of CRISPR-GPT for assisting non-expert researchers with gene-editing experiments from scratch and validate the agent's effectiveness in a real-world use case. Furthermore, we explore the ethical and regulatory considerations associated with automated gene-editing design, highlighting the need for responsible and transparent use of these tools. Our work aims to bridge the gap between beginner biological researchers and CRISPR genome engineering techniques, and demonstrate the potential of LLM agents in facilitating complex biological discovery tasks.

RNAs are essential molecules that carry genetic information vital for life, with profound implications for drug development and biotechnology. Despite this importance, RNA research is often hindered by the vast literature available on the topic. To streamline this process, we introduce RNA-GPT, a multi-modal RNA chat model designed to simplify RNA discovery by leveraging extensive RNA literature. RNA-GPT integrates RNA sequence encoders with linear projection layers and state-of-the-art large language models (LLMs) for precise representation alignment, enabling it to process user-uploaded RNA sequences and deliver concise, accurate responses. Built on a scalable training pipeline, RNA-GPT utilizes RNA-QA, an automated system that gathers RNA annotations from RNACentral using a divide-and-conquer approach with GPT-4o and latent Dirichlet allocation (LDA) to efficiently handle large datasets and generate instruction-tuning samples. Our experiments indicate that RNA-GPT effectively addresses complex RNA queries, thereby facilitating RNA research. Additionally, we present RNA-QA, a dataset of 407,616 RNA samples for modality alignment and instruction tuning, further advancing the potential of RNA research tools.

RNA plays a pivotal role in translating genetic instructions into functional outcomes, underscoring its importance in biological processes and disease mechanisms. Despite the emergence of numerous deep learning approaches for RNA, particularly universal RNA language models, there remains a significant lack of standardized benchmarks to assess the effectiveness of these methods. In this study, we introduce the first comprehensive RNA benchmark BEACON (BEnchmArk for COmprehensive RNA Task and Language Models). First, BEACON comprises 13 distinct tasks derived from extensive previous work covering structural analysis, functional studies, and engineering applications, enabling a comprehensive assessment of the performance of methods on various RNA understanding tasks. Second, we examine a range of models, including traditional approaches like CNNs, as well as advanced RNA foundation models based on language models, offering valuable insights into the task-specific performances of these models. Third, we investigate the vital RNA language model components from the tokenizer and positional encoding aspects. Notably, our findings emphasize the superiority of single nucleotide tokenization and the effectiveness of Attention with Linear Biases (ALiBi) over traditional positional encoding methods. Based on these insights, a simple yet strong baseline called BEACON-B is proposed, which can achieve outstanding performance with limited data and computational resources. The datasets and source code of our benchmark are available at https://github.com/terry-r123/RNABenchmark.

Gene panel selection aims to identify the most informative genomic biomarkers in label-free genomic datasets. Traditional approaches, which rely on domain expertise, embedded machine learning models, or heuristic-based iterative optimization, often introduce biases and inefficiencies, potentially obscuring critical biological signals. To address these challenges, we present an iterative gene panel selection strategy that harnesses ensemble knowledge from existing gene selection algorithms to establish preliminary boundaries or prior knowledge, which guide the initial search space. Subsequently, we incorporate reinforcement learning through a reward function shaped by expert behavior, enabling dynamic refinement and targeted selection of gene panels. This integration mitigates biases stemming from initial boundaries while capitalizing on RL's stochastic adaptability. Comprehensive comparative experiments, case studies, and downstream analyses demonstrate the effectiveness of our method, highlighting its improved precision and efficiency for label-free biomarker discovery. Our results underscore the potential of this approach to advance single-cell genomics data analysis.

RNA is a vital biomolecule with numerous roles and functions within cells, and interest in targeting it for therapeutic purposes has grown significantly in recent years. However, fully understanding and predicting RNA behavior, particularly for applications in drug discovery, remains a challenge due to the complexity of RNA structures and interactions. While foundational models in biology have demonstrated success in modeling several biomolecules, especially proteins, achieving similar breakthroughs for RNA has proven more difficult. Current RNA models have yet to match the performance observed in the protein domain, leaving an important gap in computational biology. In this work, we present ChaRNABERT, a suite of sample and parameter-efficient RNA foundational models, that through a learnable tokenization process, are able to reach state-of-the-art performance on several tasks in established benchmarks. We extend its testing in relevant downstream tasks such as RNA-protein and aptamer-protein interaction prediction. Weights and inference code for ChaRNABERT-8M will be provided for academic research use. The other models will be available upon request.

The RNA structure-function relationship has recently garnered significant attention within the deep learning community, promising to grow in importance as nucleic acid structure models advance. However, the absence of standardized and accessible benchmarks for deep learning on RNA 3D structures has impeded the development of models for RNA functional characteristics. In this work, we introduce a set of seven benchmarking datasets for RNA structure-function prediction, designed to address this gap. Our library builds on the established Python library rnaglib, and offers easy data distribution and encoding, splitters and evaluation methods, providing a convenient all-in-one framework for comparing models. Datasets are implemented in a fully modular and reproducible manner, facilitating for community contributions and customization. Finally, we provide initial baseline results for all tasks using a graph neural network. Source code: https://github.com/cgoliver/rnaglib Documentation: https://rnaglib.org

Modern life sciences research is increasingly relying on artificial intelligence approaches to model biological systems, primarily centered around the use of machine learning (ML) models. Although ML is undeniably useful for identifying patterns in large, complex data sets, its widespread application in biological sciences represents a significant deviation from traditional methods of scientific inquiry. As such, the interplay between these models and scientific understanding in biology is a topic with important implications for the future of scientific research, yet it is a subject that has received little attention. Here, we draw from an epistemological toolkit to contextualize recent applications of ML in biological sciences under modern philosophical theories of understanding, identifying general principles that can guide the design and application of ML systems to model biological phenomena and advance scientific knowledge. We propose that conceptions of scientific understanding as information compression, qualitative intelligibility, and dependency relation modelling provide a useful framework for interpreting ML-mediated understanding of biological systems. Through a detailed analysis of two key application areas of ML in modern biological research - protein structure prediction and single cell RNA-sequencing - we explore how these features have thus far enabled ML systems to advance scientific understanding of their target phenomena, how they may guide the development of future ML models, and the key obstacles that remain in preventing ML from achieving its potential as a tool for biological discovery. Consideration of the epistemological features of ML applications in biology will improve the prospects of these methods to solve important problems and advance scientific understanding of living systems.

Ribonucleic acid (RNA) plays a variety of crucial roles in fundamental biological processes. Recently, RNA has become an interesting drug target, emphasizing the need to improve our understanding of its structures and functions. Over the years, sequencing technologies have produced an enormous amount of unlabeled RNA data, which hides important knowledge and potential. Motivated by the successes of protein language models, we introduce RiboNucleic Acid Language Model (RiNALMo) to help unveil the hidden code of RNA. RiNALMo is the largest RNA language model to date with 650 million parameters pre-trained on 36 million non-coding RNA sequences from several available databases. RiNALMo is able to extract hidden knowledge and capture the underlying structure information implicitly embedded within the RNA sequences. RiNALMo achieves state-of-the-art results on several downstream tasks. Notably, we show that its generalization capabilities can overcome the inability of other deep learning methods for secondary structure prediction to generalize on unseen RNA families. The code has been made publicly available on https://github.com/lbcb-sci/RiNALMo.

Accurate prediction of RNA secondary structure underpins transcriptome annotation, mechanistic analysis of non-coding RNAs, and RNA therapeutic design. Recent gains from deep learning and RNA foundation models are difficult to interpret because current benchmarks may overestimate generalization across RNA families. We present the Comprehensive Hierarchical Annotation of Non-coding RNA Groups (CHANRG), a benchmark of 170{,}083 structurally non-redundant RNAs curated from more than 10 million sequences in Rfam~15.0 using structure-aware deduplication, genome-aware split design and multiscale structural evaluation. Across 29 predictors, foundation-model methods achieved the highest held-out accuracy but lost most of that advantage out of distribution, whereas structured decoders and direct neural predictors remained markedly more robust. This gap persisted after controlling for sequence length and reflected both loss of structural coverage and incorrect higher-order wiring. Together, CHANRG and a padding-free, symmetry-aware evaluation stack provide a stricter and batch-invariant framework for developing RNA structure predictors with demonstrable out-of-distribution robustness.

While artificial intelligence has made remarkable strides in revealing the relationship between biological macromolecules' primary sequence and tertiary structure, designing RNA sequences based on specified tertiary structures remains challenging. Though existing approaches in protein design have thoroughly explored structure-to-sequence dependencies in proteins, RNA design still confronts difficulties due to structural complexity and data scarcity. Moreover, direct transplantation of protein design methodologies into RNA design fails to achieve satisfactory outcomes although sharing similar structural components. In this study, we aim to systematically construct a data-driven RNA design pipeline. We crafted a large, well-curated benchmark dataset and designed a comprehensive structural modeling approach to represent the complex RNA tertiary structure. More importantly, we proposed a hierarchical data-efficient representation learning framework that learns structural representations through contrastive learning at both cluster-level and sample-level to fully leverage the limited data. By constraining data representations within a limited hyperspherical space, the intrinsic relationships between data points could be explicitly imposed. Moreover, we incorporated extracted secondary structures with base pairs as prior knowledge to facilitate the RNA design process. Extensive experiments demonstrate the effectiveness of our proposed method, providing a reliable baseline for future RNA design tasks. The source code and benchmark dataset are available at https://github.com/A4Bio/RDesign.

Long non-coding RNA, microRNA, and messenger RNA enable key regulations of various biological processes through a variety of diverse interaction mechanisms. Identifying the interactions and cross-talk between these heterogeneous RNA classes is essential in order to uncover the functional role of individual RNA transcripts, especially for unannotated and newly-discovered RNA sequences with no known interactions. Recently, sequence-based deep learning and network embedding methods are becoming promising approaches that can either predict RNA-RNA interactions from a sequence or infer missing interactions from patterns that may exist in the network topology. However, the majority of these methods have several limitations, eg, the inability to perform inductive predictions, to distinguish the directionality of interactions, or to integrate various sequence, interaction, and annotation biological datasets. We proposed a novel deep learning-based framework, rna2rna, which learns from RNA sequences to produce a low-dimensional embedding that preserves the proximities in both the interactions topology and the functional affinity topology. In this proposed embedding space, we have designated a two-part" source and target contexts" to capture the targeting and receptive fields of each RNA transcript, while encapsulating the heterogenous cross-talk interactions between lncRNAs and miRNAs. From experimental results, our method exhibits superior performance in AUPR rates compared to state-of-art approaches at predicting missing interactions in different RNA-RNA interaction databases and was shown to accurately perform link predictions to novel RNA sequences not seen at training time, even without any prior information. Additional results suggest that our proposed framework can capture a manifold for heterogeneous RNA sequences to discover novel functional annotations.

Non-coding RNA structure and function are essential to understanding various biological processes, such as cell signaling, gene expression, and post-transcriptional regulations. These are all among the core problems in the RNA field. With the rapid growth of sequencing technology, we have accumulated a massive amount of unannotated RNA sequences. On the other hand, expensive experimental observatory results in only limited numbers of annotated data and 3D structures. Hence, it is still challenging to design computational methods for predicting their structures and functions. The lack of annotated data and systematic study causes inferior performance. To resolve the issue, we propose a novel RNA foundation model (RNA-FM) to take advantage of all the 23 million non-coding RNA sequences through self-supervised learning. Within this approach, we discover that the pre-trained RNA-FM could infer sequential and evolutionary information of non-coding RNAs without using any labels. Furthermore, we demonstrate RNA-FM's effectiveness by applying it to the downstream secondary/3D structure prediction, SARS-CoV-2 genome structure and evolution prediction, protein-RNA binding preference modeling, and gene expression regulation modeling. The comprehensive experiments show that the proposed method improves the RNA structural and functional modelling results significantly and consistently. Despite only being trained with unlabelled data, RNA-FM can serve as the foundational model for the field.

Biological function in RNA is encoded across scales, from local sequence motifs to long-range structural dependencies. Conventional RNA foundation models couple parameter capacity and inference depth within a fixed architecture, prescribing a fixed computation graph for each inference. Here we present Eco-RNA, an 80M-parameter RNA foundation model that makes inference depth adjustable through learned iterative refinement. Its shared, input-conditioned Transformer core refines sequence representations through repeated application. The iteration count is selected after training and controls effective depth at fixed model parameters. We train across recurrent depths with masked reconstruction, state regularization, and a one-sided loss that anchors deeper reconstruction to a shallow reference. On the 70-assay RNAGym fitness benchmark, increasing refinement from one to four iterations raises aggregate absolute Spearman correlation from 0.242 to 0.286, with the gain retained through eight iterations. At four iterations, Eco-RNA surpasses the current SOTA Evo 2 40B on all three aggregate fitness metrics despite 500x fewer parameters. Its iteration configurations advance the compute-performance Pareto frontier among the evaluated models. It also outperforms the evaluated baselines in non-coding RNA family classification, RNA secondary-structure prediction, and chemical probing profile prediction. These results establish internal inference computation as an effective scaling dimension for RNA foundation models.

Protein fitness optimization involves finding a protein sequence that maximizes desired quantitative properties in a combinatorially large design space of possible sequences. Recent developments in steering protein generative models (e.g diffusion models, language models) offer a promising approach. However, by and large, past studies have optimized surrogate rewards and/or utilized large amounts of labeled data for steering, making it unclear how well existing methods perform and compare to each other in real-world optimization campaigns where fitness is measured by low-throughput wet-lab assays. In this study, we explore fitness optimization using small amounts (hundreds) of labeled sequence-fitness pairs and comprehensively evaluate strategies such as classifier guidance and posterior sampling for guiding generation from different discrete diffusion models of protein sequences. We also demonstrate how guidance can be integrated into adaptive sequence selection akin to Thompson sampling in Bayesian optimization, showing that plug-and-play guidance strategies offer advantages compared to alternatives such as reinforcement learning with protein language models.

Sequence generative models are transforming protein engineering. However, no principled framework exists for conditioning these models on auxiliary information, such as experimental data, without additional training of a generative model. Herein, we present ProteinGuide, a method for such "on-the-fly" conditioning, amenable to a broad class of protein generative models including Masked Language Models (e.g. ESM3), any-order auto-regressive models (e.g. ProteinMPNN) as well as diffusion and flow matching models (e.g. MultiFlow). ProteinGuide stems from our unifying view of these model classes under a single statistical framework. As proof of principle, we perform several in silico experiments. We first guide pre-trained generative models to design proteins with user-specified properties, such as higher stability or activity. Next, we design for optimizing two desired properties that are in tension with each other. Finally, we apply our method in the wet lab, using ProteinGuide to increase the editing activity of an adenine base editor in vivo with data from only a single pooled library of 2,000 variants. We find that a single round of ProteinGuide achieves a higher editing efficiency than was previously achieved using seven rounds of directed evolution.

RNA design aims to identify sequences that fold into specified secondary structures. Existing methods formulate the task as target-specific search or conditional generation. However, natural RNA evolution proceeds through sequence variation and selection, with compensatory substitutions, whereas these methods do not explicitly model this process. To address this limitation, we propose a two-stage framework comprising RNA Inverse-Folding Flow (RNA-IFlow) and RNA-IFlow-RL. RNA-IFlow uses structure-conditioned Dirichlet Flow Matching to model coordinated variation across the sequence, while RNA-IFlow-RL maps the learned flow to a pairing-preserving finite policy and refines it with thermodynamic feedback. Our framework achieves leading performance on multiple benchmarks, reaching 85.19% Pass@1 on Rfam-27. Further analyses reveal thermodynamic gains, policy dynamics, and robustness across settings. Our work couples coordinated variation with thermodynamic selection, offering a novel paradigm for RNA design.

Full-length RNAs, particularly messenger RNAs, often exceed the context lengths used to pretrain existing RNA foundation models, limiting complete-transcript modeling at single-nucleotide resolution. We present RIBOSPAN, a 1.61-billion-parameter bidirectional RNA foundation model natively pretrained with context lengths up to 10,240 nt. RIBOSPAN combines dense bidirectional self-attention, single-nucleotide tokenization, and attention-isolated sequence packing to enable high-resolution modeling of complete long RNAs. We evaluate the model through nucleotide reconstruction, a controlled long-context representation benchmark, and frozen RNA-type representation analysis. Native 10K pretraining preserves strong reconstruction at 10,240 tokens, while continued pretraining with 40% masking improves recovery under heavy corruption while preserving representation quality. The long-context benchmark further shows that native 10K models maintain strong contextual responsiveness and context-specific representation separation while keeping perturbation-induced representation changes highly localized. Inference-time YaRN scaling recovers much of the contextual organization lost by direct extrapolation of short-context models, but induces substantially greater distal representation diffusion. Frozen-representation evaluations further demonstrate state-of-the-art RNA representation quality, with RIBOSPAN achieving the strongest overall performance across diverse RNA types and retaining a clear advantage on long RNAs. Building on the same backbone, we develop a multidimensionally conditioned discrete-diffusion framework for full-length mRNA generation and redesign, including synonymous-codon diffusion for protein-preserving CDS optimization. Together, RIBOSPAN establishes a powerful long-context foundation for transferable RNA representation learning and full-transcript mRNA design.

We present Readout Guidance, a method for controlling text-to-image diffusion models with learned signals. Readout Guidance uses readout heads, lightweight networks trained to extract signals from the features of a pre-trained, frozen diffusion model at every timestep. These readouts can encode single-image properties, such as pose, depth, and edges; or higher-order properties that relate multiple images, such as correspondence and appearance similarity. Furthermore, by comparing the readout estimates to a user-defined target, and back-propagating the gradient through the readout head, these estimates can be used to guide the sampling process. Compared to prior methods for conditional generation, Readout Guidance requires significantly fewer added parameters and training samples, and offers a convenient and simple recipe for reproducing different forms of conditional control under a single framework, with a single architecture and sampling procedure. We showcase these benefits in the applications of drag-based manipulation, identity-consistent generation, and spatially aligned control. Project page: https://readout-guidance.github.io.

Computational RNA design tasks are often posed as inverse problems, where sequences are designed based on adopting a single desired secondary structure without considering 3D geometry and conformational diversity. We introduce gRNAde, a geometric RNA design pipeline operating on 3D RNA backbones to design sequences that explicitly account for structure and dynamics. Under the hood, gRNAde is a multi-state Graph Neural Network that generates candidate RNA sequences conditioned on one or more 3D backbone structures where the identities of the bases are unknown. On a single-state fixed backbone re-design benchmark of 14 RNA structures from the PDB identified by Das et al. [2010], gRNAde obtains higher native sequence recovery rates (56% on average) compared to Rosetta (45% on average), taking under a second to produce designs compared to the reported hours for Rosetta. We further demonstrate the utility of gRNAde on a new benchmark of multi-state design for structurally flexible RNAs, as well as zero-shot ranking of mutational fitness landscapes in a retrospective analysis of a recent ribozyme. Open source code: https://github.com/chaitjo/geometric-rna-design

Learning molecular models of RNA requires simulation data that capture conformational variability and provide consistent physical training signals. Here, we introduce mdRNAcat, a curated dataset of all-atom molecular dynamics (MD) simulations of 48 RNA systems selected to promote sequence diversity. Each system is simulated using replica-exchange with solute scaling (REST2), with 32 Hamiltonian states and production lengths of 200-300 ns per state. The dataset provides atomic coordinates, instantaneous forces, and forces reevaluated under the unscaled reference Hamiltonian, together with structural annotations and replica-exchange metadata. Coordinates and forces are available at 1 ps intervals for the reference state and 100 ps intervals across all states in a standardized HDF5 format. We characterize conformational sampling, exchange behavior, base pairing, and sugar-pucker distributions to document the properties of the simulated ensembles. mdRNAcat provides a reusable resource for developing and evaluating data-driven RNA models, including coarse-grained force fields.

RNA design is the search for a sequence or set of sequences that will fold into predefined structures, also known as the inverse problem of RNA folding. While numerous RNA design methods have been invented to find sequences capable of folding into a target structure, little attention has been given to the identification of undesignable structures according to the minimum free energy (MFE) criterion under the Turner model. In this paper, we address this gap by first introducing mathematical theorems outlining sufficient conditions for recognizing undesignable structures, then proposing efficient algorithms, guided by these theorems, to verify the undesignability of RNA structures. Through the application of these theorems and algorithms to the Eterna100 puzzles, we demonstrate the ability to efficiently establish that 15 of the puzzles indeed fall within the category of undesignable structures. In addition, we provide specific insights from the study of undesignability, in the hope that it will enable more understanding of RNA folding and RNA design.

Generating property-optimized mRNA sequences is central to applications such as vaccine design and protein replacement therapy, but remains challenging due to limited data, complex sequence-function relationships, and the narrow space of biologically viable sequences. Generative methods that drift away from the data manifold can yield sequences that fail to fold, translate poorly, or are otherwise nonfunctional. We present RNAGenScape, a property-guided manifold Langevin dynamics framework for mRNA sequence generation that operates directly on a learned manifold of real data. By performing iterative local optimization constrained to this manifold, RNAGenScape preserves biological viability, accesses reliable guidance, and avoids excursions into nonfunctional regions of the ambient sequence space. The framework integrates three components: (1) an autoencoder jointly trained with a property predictor to learn a property-organized latent manifold, (2) a denoising autoencoder that projects updates back onto the manifold, and (3) a property-guided Langevin dynamics procedure that performs optimization along the manifold. Across three real-world mRNA datasets spanning two orders of magnitude in size, RNAGenScape increases median property gain by up to 148% and success rate by up to 30% while ensuring biological viability of generated sequences, and achieves competitive inference efficiency relative to existing generative approaches.

RNA function arises from the coupling of nucleotide sequence and three-dimensional structure, motivating their joint design. Coordinating global folding with nucleotide-level detail remains challenging under limited structural supervision. We introduce La-Ribo, a generative framework for RNA sequence-structure co-design via geometry-latent flow matching. La-Ribo retains a sparse phosphate-sugar--base scaffold and encodes nucleotide identity and local conformation in residue-wise latents. A shared flow network generates both jointly, and an RNA-specific decoder then reconstructs all heavy atoms. To expand supervision, we construct a quality-controlled corpus of 168,561 RNA structures, integrating experimental data with predictions from three folding models, including 10,631 MSA-supported structures generated in this work. La-Ribo improves designability and codesignability over the evaluated baselines across sampling budgets and two refolding models, and the same prior supports scaffold-conditioned inverse folding without additional training.

A single gene can encode for different protein versions through a process called alternative splicing. Since proteins play major roles in cellular functions, aberrant splicing profiles can result in a variety of diseases, including cancers. Alternative splicing is determined by the gene's primary sequence and other regulatory factors such as RNA-binding protein levels. With these as input, we formulate the prediction of RNA splicing as a regression task and build a new training dataset (CAPD) to benchmark learned models. We propose discrete compositional energy network (DCEN) which leverages the hierarchical relationships between splice sites, junctions and transcripts to approach this task. In the case of alternative splicing prediction, DCEN models mRNA transcript probabilities through its constituent splice junctions' energy values. These transcript probabilities are subsequently mapped to relative abundance values of key nucleotides and trained with ground-truth experimental measurements. Through our experiments on CAPD, we show that DCEN outperforms baselines and ablation variants.

Histopathology whole-slide images (WSIs) are routinely acquired in clinical practice and contain rich tissue morphology but lack direct molecular architecture and functional programs defining pathological states, whereas RNA sequencing (RNA-seq) provides genome-wide transcriptional profiles at substantial cost, thereby motivating WSI-based genome-wide transcriptomic prediction. Existing approaches for predicting gene expression from WSIs predominantly rely on deterministic regression with one-to-one mapping, limiting their ability to capture biological heterogeneity and predictive uncertainty. We propose RNA-FM, a flow-matching generative framework for genome-wide bulk RNA-seq prediction from WSIs. RNA-FM formulates transcriptomic prediction as a continuous-time conditional transport problem, learning a velocity field that maps a simple prior to the target gene expression distribution conditioned on morphologies. By integrating pathway-level structure, RNA-FM enables scalable and biologically interpretable genome-wide gene expression imputation. Extensive experiments demonstrate that RNA-FM consistently outperforms state-of-the-art approaches while maintaining biological meaningfulness. Code is available at https://github.com/YXSong000/RNA-FM.

Long non-coding RNAs (lncRNAs) serve as crucial regulators in numerous biological processes. Although they share sequence similarities with messenger RNAs (mRNAs), lncRNAs perform entirely different roles, providing new avenues for biological research. The emergence of next-generation sequencing technologies has greatly advanced the detection and identification of lncRNA transcripts and deep learning-based approaches have been introduced to classify long non-coding RNAs (lncRNAs). These advanced methods have significantly enhanced the efficiency of identifying lncRNAs. However, many of these methods are devoid of robustness and accuracy due to the extended length of the sequences involved. To tackle this issue, we have introduced a novel pre-trained bidirectional encoder representation called LoRA-BERT. LoRA-BERT is designed to capture the importance of nucleotide-level information during sequence classification, leading to more robust and satisfactory outcomes. In a comprehensive comparison with commonly used sequence prediction tools, we have demonstrated that LoRA-BERT outperforms them in terms of accuracy and efficiency. Our results indicate that, when utilizing the transformer model, LoRA-BERT achieves state-of-the-art performance in predicting both lncRNAs and mRNAs for human and mouse species. Through the utilization of LoRA-BERT, we acquire valuable insights into the traits of lncRNAs and mRNAs, offering the potential to aid in the comprehension and detection of diseases linked to lncRNAs in humans.

Transcriptomic foundation models (TFMs) have recently emerged as powerful tools for analyzing gene expression in cells and tissues, supporting key tasks such as cell-type annotation, batch correction, and perturbation prediction. However, the diversity of model implementations and training strategies across recent TFMs, though promising, makes it challenging to isolate the contribution of individual design choices or evaluate their potential synergies. This hinders the field's ability to converge on best practices and limits the reproducibility of insights across studies. We present BMFM-RNA, an open-source, modular software package that unifies diverse TFM pretraining and fine-tuning objectives within a single framework. Leveraging this capability, we introduce a novel training objective, whole cell expression decoder (WCED), which captures global expression patterns using an autoencoder-like CLS bottleneck representation. In this paper, we describe the framework, supported input representations, and training objectives. We evaluated four model checkpoints pretrained on CELLxGENE using combinations of masked language modeling (MLM), WCED and multitask learning. Using the benchmarking capabilities of BMFM-RNA, we show that WCED-based models achieve performance that matches or exceeds state-of-the-art approaches like scGPT across more than a dozen datasets in both zero-shot and fine-tuning tasks. BMFM-RNA, available as part of the biomed-multi-omics project ( https://github.com/BiomedSciAI/biomed-multi-omic ), offers a reproducible foundation for systematic benchmarking and community-driven exploration of optimal TFM training strategies, enabling the development of more effective tools to leverage the latest advances in AI for understanding cell biology.

RNA design shows growing applications in synthetic biology and therapeutics, driven by the crucial role of RNA in various biological processes. A fundamental challenge is to find functional RNA sequences that satisfy given structural constraints, known as the inverse folding problem. Computational approaches have emerged to address this problem based on secondary structures. However, designing RNA sequences directly from 3D structures is still challenging, due to the scarcity of data, the non-unique structure-sequence mapping, and the flexibility of RNA conformation. In this study, we propose RiboDiffusion, a generative diffusion model for RNA inverse folding that can learn the conditional distribution of RNA sequences given 3D backbone structures. Our model consists of a graph neural network-based structure module and a Transformer-based sequence module, which iteratively transforms random sequences into desired sequences. By tuning the sampling weight, our model allows for a trade-off between sequence recovery and diversity to explore more candidates. We split test sets based on RNA clustering with different cut-offs for sequence or structure similarity. Our model outperforms baselines in sequence recovery, with an average relative improvement of 11% for sequence similarity splits and 16% for structure similarity splits. Moreover, RiboDiffusion performs consistently well across various RNA length categories and RNA types. We also apply in-silico folding to validate whether the generated sequences can fold into the given 3D RNA backbones. Our method could be a powerful tool for RNA design that explores the vast sequence space and finds novel solutions to 3D structural constraints.

Guidance is a crucial technique for extracting the best performance out of image-generating diffusion models. Traditionally, a constant guidance weight has been applied throughout the sampling chain of an image. We show that guidance is clearly harmful toward the beginning of the chain (high noise levels), largely unnecessary toward the end (low noise levels), and only beneficial in the middle. We thus restrict it to a specific range of noise levels, improving both the inference speed and result quality. This limited guidance interval improves the record FID in ImageNet-512 significantly, from 1.81 to 1.40. We show that it is quantitatively and qualitatively beneficial across different sampler parameters, network architectures, and datasets, including the large-scale setting of Stable Diffusion XL. We thus suggest exposing the guidance interval as a hyperparameter in all diffusion models that use guidance.

Large Language Models (LLMs) exhibit impressive capabilities but also present risks such as biased content generation and privacy issues. One of the current alignment techniques includes principle-driven integration, but it faces challenges arising from the imprecision of manually crafted rules and inadequate risk perception in models without safety training. To address these, we introduce Guide-Align, a two-stage approach. Initially, a safety-trained model identifies potential risks and formulates specific guidelines for various inputs, establishing a comprehensive library of guidelines and a model for input-guidelines retrieval. Subsequently, the retrieval model correlates new inputs with relevant guidelines, which guide LLMs in response generation to ensure safe and high-quality outputs, thereby aligning with human values. An additional optional stage involves fine-tuning a model with well-aligned datasets generated through the process implemented in the second stage. Our method customizes guidelines to accommodate diverse inputs, thereby enhancing the fine-grainedness and comprehensiveness of the guideline library. Furthermore, it incorporates safety expertise from a safety-trained LLM through a lightweight retrieval model. We evaluate our approach on three benchmarks, demonstrating significant improvements in LLM security and quality. Notably, our fine-tuned model, Labrador, even at 13 billion parameters, outperforms GPT-3.5-turbo and surpasses GPT-4 in alignment capabilities.

Biological function emerges from coupled constraints across sequence, structure, regulation, evolution, and cellular context, yet most foundation models in biology are trained within one modality or for a fixed forward task. We present MIMIC, a generative multimodal foundation model trained on our newly curated and aligned dataset, LORE, linking nucleic acid, protein, evolutionary, structural, regulatory, and semantic/contextual modalities within partially observed biomolecular states. MIMIC uses a split-track encoder-decoder architecture to condition on arbitrary subsets of observed modalities and reconstruct or generate missing components of molecular state across the genome, transcriptome, and proteome. Multimodal conditioning consistently improves MIMIC's sequence reconstruction relative to sequence-only inputs, while its learned representations enable state-of-the-art performance on RNA and protein downstream tasks. MIMIC achieves state-of-the-art splicing prediction, and its joint generative formulation enables isoform-aware inference that further improves performance. Beyond prediction, the same generative framework supports constrained design. For RNA, MIMIC identifies corrective edits in a clinically relevant HBB splice-disrupting mutation without reverting it by using evolutionary and structural signals. For proteins, jointly conditioning on shape and surface chemistry of PD-L1 and hACE2 binding sites produces diverse, high-confidence sequences with strong in silico support for target binding. Finally, MIMIC uses experimental context as semantic conditioning to model assay-dependent RNA chemical probing, rather than treating context as a fixed output. Together, these results position MIMIC's aligned multimodal generative modeling as a strong foundation for unifying representation learning, conditional prediction, and constrained biomolecular design within a single model.

Drug mechanism-of-action (MoA) modeling commonly relies on perturbational transcriptomes, but matched microRNA (miRNA) measurements are often unavailable. Inferred regulatory features offer a scalable way to reuse these data. Here, we present MIRCID, a framework comparing gene expression with inferred transcription factor (TF) activity and miRNA expression across pathway classification and similarity-based MoA retrieval. HubmiRNet infers 414 pan-cancer hub miRNAs (HubmiRs) from 977 L1000 landmark genes, achieving a Pearson correlation coefficient of 87.72%; its 1,298-output variant also outperformed SiCmiR on the full-miRNA task (71.21% versus 67.30%). In the evaluated comparisons, miRNA augmentation provided more consistent gains than TF activity. Generic embedding controls showed model-dependent utility, while complementarity analyses identified a distinct, partially linearly recoverable representation that retained gene-derived structure. Illustrative rescue cases linked improved classification to biologically plausible miRNA patterns in samples with weak transcriptional signatures. These findings support inferred HubmiRs as a biologically informed recoding of transcriptomic data for perturbational drug modeling, while leaving recovery of measured perturbational miRNA responses to further validation.

Therapeutic mRNA design requires coordinating multiple interacting sequence features across the full transcript, where codon usage, untranslated regions (UTRs), and their coupling jointly determine stability, translation efficiency, and protein expression. Here, we present mRNA generation via unrolled trajectories and informed latent updates (mRNAutilus), a framework for simultaneous codon optimization and de novo UTR design directly from sequence. mRNAutilus combines a masked discrete diffusion model trained on millions of full-length mRNAs with Monte Carlo Tree Guidance to generate Pareto-efficient sequences under multiple functional objectives, using lightweight regressors over model embeddings to predict half-life, translation efficiency, and protein abundance. Unlike recent methods that design coding sequences and UTRs separately or rely on post hoc assembly and screening, mRNAutilus generates complete transcripts in a single process optimized across properties. Across diverse targets, zero-shot mRNAs encoding P. pyralis luciferase achieve over 400-fold higher expression than wild-type and outperform commercial and machine learning-designed baselines, including zero-shot generative approaches. Zero-shot SARS-CoV-2 Spike mRNAs exceed clinically used and commercial constructs and match or surpass lab-optimized designs with improved durability. We further demonstrate generality in therapeutic settings, including prime editing (PEMax) and programmable proteome modulation, where mRNAutilus-designed constructs enhance expression of peptide-guided E3 ligases (uAbs) for beta-catenin degradation. These results establish a sequence-based, multi-objective framework for generating functional mRNAs tailored to diverse biological applications.

We introduce MORAD, an online reinforcement learning framework for backbone-conditioned RNA diffusion models that trains a single shared policy across diverse target backbones. Structure-conditioned RNA inverse design seeks nucleotide sequences compatible with a target three-dimensional backbone, yet existing reinforcement learning approaches either optimize a separate policy for each target backbone or rely on offline preference optimization, leaving online post-training of a reusable backbone-conditioned model largely unexplored. MORAD combines backbone-conditioned group sampling, group-relative reward normalization, and a forward-process diffusion objective. Beyond existing RL rewards that primarily target tertiary structural quality, MORAD jointly optimizes six measurements spanning tertiary geometry, base pairing, ensemble behavior, and sequence composition. To aggregate these heterogeneous objectives despite differences in scale and optimization direction, MORAD maps each measurement to a bounded desirability score and combines them with a weighted geometric mean. Compared with a tertiary-structure-only reward, this multi-objective formulation improves 10 of the 11 evaluation metrics that have a preferred direction. Applied to pretrained RIDE, MORAD improves GDT-TS by 16.0% (from 0.3300 to 0.3827) and pairing MCC by 19.4% (from 0.6110 to 0.7295), while reducing normalized ensemble defect by 27.5% (from 0.3906 to 0.2830). On the test set, MORAD outperforms RiboDiffusion, gRNAde, and RDesign across tertiary structural accuracy, secondary-structure pairing, and thermodynamic quality, establishing a new state of the art in structure-conditioned RNA inverse design.

The integration of biomolecular modeling with natural language (BL) has emerged as a promising interdisciplinary area at the intersection of artificial intelligence, chemistry and biology. This approach leverages the rich, multifaceted descriptions of biomolecules contained within textual data sources to enhance our fundamental understanding and enable downstream computational tasks such as biomolecule property prediction. The fusion of the nuanced narratives expressed through natural language with the structural and functional specifics of biomolecules described via various molecular modeling techniques opens new avenues for comprehensively representing and analyzing biomolecules. By incorporating the contextual language data that surrounds biomolecules into their modeling, BL aims to capture a holistic view encompassing both the symbolic qualities conveyed through language as well as quantitative structural characteristics. In this review, we provide an extensive analysis of recent advancements achieved through cross modeling of biomolecules and natural language. (1) We begin by outlining the technical representations of biomolecules employed, including sequences, 2D graphs, and 3D structures. (2) We then examine in depth the rationale and key objectives underlying effective multi-modal integration of language and molecular data sources. (3) We subsequently survey the practical applications enabled to date in this developing research area. (4) We also compile and summarize the available resources and datasets to facilitate future work. (5) Looking ahead, we identify several promising research directions worthy of further exploration and investment to continue advancing the field. The related resources and contents are updating in https://github.com/QizhiPei/Awesome-Biomolecule-Language-Cross-Modeling.

mRNA-based vaccines have become a major focus in the pharmaceutical industry. The coding sequence as well as the Untranslated Regions (UTRs) of an mRNA can strongly influence translation efficiency, stability, degradation, and other factors that collectively determine a vaccine's effectiveness. However, optimizing mRNA sequences for those properties remains a complex challenge. Existing deep learning models often focus solely on coding region optimization, overlooking the UTRs. We present Helix-mRNA, a structured state-space-based and attention hybrid model to address these challenges. In addition to a first pre-training, a second pre-training stage allows us to specialise the model with high-quality data. We employ single nucleotide tokenization of mRNA sequences with codon separation, ensuring prior biological and structural information from the original mRNA sequence is not lost. Our model, Helix-mRNA, outperforms existing methods in analysing both UTRs and coding region properties. It can process sequences 6x longer than current approaches while using only 10% of the parameters of existing foundation models. Its predictive capabilities extend to all mRNA regions. We open-source the model (https://github.com/helicalAI/helical) and model weights (https://huggingface.co/helical-ai/helix-mRNA).

Genetic engineering of cells has a range of applications in treating incurable diseases. Plasmid DNA is a popular choice of nucleic acid for cell engineering due to its low cost and stability. However, plasmid DNA must survive the protective mechanisms present in the cell's cytoplasm to enter the nucleus for translation. Many of the existing methods for nucleic acid delivery, such as chemical-based and virus-based delivery, suffer from drawbacks induced by the nucleic acid carrier itself. Mechanical methods present an alternative to nucleic acid carriers by physically producing openings in the cell to deliver cargos. However, in most systems, the cell membrane openings are too small to deliver large cargos, or the poration process leads to low cell viability. In this study, we present a microfluidic device with integrated high aspect ratio nanostructures that repeatably rupture the cell membrane and nuclear envelope. These sharp-tipped nanolancets penetrate the cell deep enough to allow direct delivery of cargos into the nucleus, but still allow for cell recovery after treatment. We show the device's ability to deliver cargo to a variety of cell types while maintaining high viability. Then, we demonstrate the rapid onset of plasmid DNA expression that results from direct nuclear delivery of naked DNA, showing expression speeds comparable to microinjection, but with significantly greater throughput. We envision the use of this device as a tool to quickly produce high quantities of genetically engineered cells to treat a myriad of diseases.

Understanding cellular mechanisms requires integrating information across DNA, RNA, and protein - the three molecular systems linked by the Central Dogma of molecular biology. While domain-specific foundation models have achieved success for each modality individually, they remain isolated, limiting our ability to model integrated cellular processes. Here we present the Central Dogma Transformer (CDT), an architecture that integrates pre-trained language models for DNA, RNA, and protein following the directional logic of the Central Dogma. CDT employs directional cross-attention mechanisms - DNA-to-RNA attention models transcriptional regulation, while RNA-to-Protein attention models translational relationships - producing a unified Virtual Cell Embedding that integrates all three modalities. We validate CDT v1 - a proof-of-concept implementation using fixed (non-cell-specific) RNA and protein embeddings - on CRISPRi enhancer perturbation data from K562 cells, achieving a Pearson correlation of 0.503, representing 63% of the theoretical ceiling set by cross-experiment variability (r = 0.797). Attention and gradient analyses provide complementary interpretive windows: in detailed case studies, these approaches highlight largely distinct genomic regions, with gradient analysis identifying a CTCF binding site that Hi-C data showed as physically contacting both enhancer and target gene. These results suggest that AI architectures aligned with biological information flow can achieve both predictive accuracy and mechanistic interpretability.

Training-free guided generation is a widely used and powerful technique that allows the end user to exert further control over the generative process of flow/diffusion models. Generally speaking, two families of techniques have emerged for solving this problem for gradient-based guidance: namely, posterior guidance (i.e., guidance via projecting the current sample to the target distribution via the target prediction model) and end-to-end guidance (i.e., guidance by performing backpropagation throughout the entire ODE solve). In this work, we show that these two seemingly separate families can actually be unified by looking at posterior guidance as a greedy strategy of end-to-end guidance. We explore the theoretical connections between these two families and provide an in-depth theoretical of these two techniques relative to the continuous ideal gradients. Motivated by this analysis we then show a method for interpolating between these two families enabling a trade-off between compute and accuracy of the guidance gradients. We then validate this work on several inverse image problems and property-guided molecular generation.

The alignment between RNA sequences and structures in foundation models (FMs) has yet to be thoroughly investigated. Existing FMs have struggled to establish sequence-structure alignment, hindering the free flow of genomic information between RNA sequences and structures. In this study, we introduce OmniGenome, an RNA FM trained to align RNA sequences with respect to secondary structures based on structure-contextualised modelling. The alignment enables free and bidirectional mappings between sequences and structures by utilising the flexible RNA modelling paradigm that supports versatile input and output modalities, i.e., sequence and/or structure as input/output. We implement RNA design and zero-shot secondary structure prediction as case studies to evaluate the Seq2Str and Str2Seq mapping capacity of OmniGenome. Results on the EternaV2 benchmark show that OmniGenome solved 74% of puzzles, whereas existing FMs only solved up to 3% of the puzzles due to the oversight of sequence-structure alignment. We leverage four comprehensive in-silico genome modelling benchmarks to evaluate performance across a diverse set of genome downstream tasks, where the results show that OmniGenome achieves state-of-the-art performance on RNA and DNA benchmarks, even without any training on DNA genomes.

Structure-Based molecule optimization (SBMO) aims to optimize molecules with both continuous coordinates and discrete types against protein targets. A promising direction is to exert gradient guidance on generative models given its remarkable success in images, but it is challenging to guide discrete data and risks inconsistencies between modalities. To this end, we leverage a continuous and differentiable space derived through Bayesian inference, presenting Molecule Joint Optimization (MolJO), the gradient-based SBMO framework that facilitates joint guidance signals across different modalities while preserving SE(3)-equivariance. We introduce a novel backward correction strategy that optimizes within a sliding window of the past histories, allowing for a seamless trade-off between explore-and-exploit during optimization. MolJO achieves state-of-the-art performance on CrossDocked2020 benchmark (Success Rate 51.3%, Vina Dock -9.05 and SA 0.78), more than 4x improvement in Success Rate compared to the gradient-based counterpart, and 2x "Me-Better" Ratio as much as 3D baselines. Furthermore, we extend MolJO to a wide range of optimization settings, including multi-objective optimization and challenging tasks in drug design such as R-group optimization and scaffold hopping, further underscoring its versatility. Code is available at https://github.com/AlgoMole/MolCRAFT.

Foundation models have revolutionized natural language processing and artificial intelligence, significantly enhancing how machines comprehend and generate human languages. Inspired by the success of these foundation models, researchers have developed foundation models for individual scientific domains, including small molecules, materials, proteins, DNA, and RNA. However, these models are typically trained in isolation, lacking the ability to integrate across different scientific domains. Recognizing that entities within these domains can all be represented as sequences, which together form the "language of nature", we introduce Nature Language Model (briefly, NatureLM), a sequence-based science foundation model designed for scientific discovery. Pre-trained with data from multiple scientific domains, NatureLM offers a unified, versatile model that enables various applications including: (i) generating and optimizing small molecules, proteins, RNA, and materials using text instructions; (ii) cross-domain generation/design, such as protein-to-molecule and protein-to-RNA generation; and (iii) achieving state-of-the-art performance in tasks like SMILES-to-IUPAC translation and retrosynthesis on USPTO-50k. NatureLM offers a promising generalist approach for various scientific tasks, including drug discovery (hit generation/optimization, ADMET optimization, synthesis), novel material design, and the development of therapeutic proteins or nucleotides. We have developed NatureLM models in different sizes (1 billion, 8 billion, and 46.7 billion parameters) and observed a clear improvement in performance as the model size increases.

Predicting transcriptomic responses to small-molecule perturbations across cell lines is central to drug discovery, but exhaustive profiling of drug-cell combinations is infeasible. We frame molecular perturbation prediction as retrieve-and-aggregate: approximate an unmeasured drug's response in a cell line by aggregating measured responses of a small set of biologically related compounds. We propose LLM-Guided Retrieval (LGR), where a large language model (LLM) ranks candidate neighbor drugs (restricted to those profiled in the target cell line); after which a fixed mean aggregator combines their observed expression deltas to form the prediction. We evaluate on the Tahoe-100M single-cell perturbation atlas under unseen-drug, unseen-cell-line, and open-world regimes. LGR consistently improves over drug mean, ChemCPA, and chemistry-based kNN baselines, with the strongest gains for unseen cell-line generalization, where it achieves higher correlation and lower error than mean baselines. Across settings, LGR improves directional (sign) accuracy of gene regulation, indicating better recovery of biologically meaningful perturbation effects even when magnitude-based metrics are similar. These results suggest that retrieval quality, rather than predictor complexity, is a key driver of zero-shot molecular perturbation prediction, and that LLMs can provide a useful biological prior when used as constrained retrieval modules.

The interactions between DNA, RNA, and proteins are fundamental to biological processes, as illustrated by the central dogma of molecular biology. Although modern biological pre-trained models have achieved great success in analyzing these macromolecules individually, their interconnected nature remains underexplored. This paper follows the guidance of the central dogma to redesign both the data and model pipeline and offers a comprehensive framework, Life-Code, that spans different biological functions. As for data flow, we propose a unified pipeline to integrate multi-omics data by reverse-transcribing RNA and reverse-translating amino acids into nucleotide-based sequences. As for the model, we design a codon tokenizer and a hybrid long-sequence architecture to encode the interactions between coding and non-coding regions through masked modeling pre-training. To model the translation and folding process with coding sequences, Life-Code learns protein structures of the corresponding amino acids by knowledge distillation from off-the-shelf protein language models. Such designs enable Life-Code to capture complex interactions within genetic sequences, providing a more comprehensive understanding of multi-omics with the central dogma. Extensive experiments show that Life-Code achieves state-of-the-art results on various tasks across three omics, highlighting its potential for advancing multi-omics analysis and interpretation.

Flow matching in the continuous simplex has emerged as a promising strategy for DNA sequence design, but struggles to scale to higher simplex dimensions required for peptide and protein generation. We introduce Gumbel-Softmax Flow and Score Matching, a generative framework on the simplex based on a novel Gumbel-Softmax interpolant with a time-dependent temperature. Using this interpolant, we introduce Gumbel-Softmax Flow Matching by deriving a parameterized velocity field that transports from smooth categorical distributions to distributions concentrated at a single vertex of the simplex. We alternatively present Gumbel-Softmax Score Matching which learns to regress the gradient of the probability density. Our framework enables high-quality, diverse generation and scales efficiently to higher-dimensional simplices. To enable training-free guidance, we propose Straight-Through Guided Flows (STGFlow), a classifier-based guidance method that leverages straight-through estimators to steer the unconditional velocity field toward optimal vertices of the simplex. STGFlow enables efficient inference-time guidance using classifiers pre-trained on clean sequences, and can be used with any discrete flow method. Together, these components form a robust framework for controllable de novo sequence generation. We demonstrate state-of-the-art performance in conditional DNA promoter design, sequence-only protein generation, and target-binding peptide design for rare disease treatment.

RNA design aims to find a sequence that folds with highest probability into a designated target structure. However, certain structures are undesignable, meaning no sequence can fold into the target structure under the default (Turner) RNA folding model. Understanding the specific local structures (i.e., "motifs") that contribute to undesignability is crucial for refining RNA folding models and determining the limits of RNA designability. Despite its importance, this problem has received very little attention, and previous efforts are neither scalable nor interpretable. We develop a new theoretical framework for motif (un-)designability, and design scalable and interpretable algorithms to identify minimal undesignable motifs within a given RNA secondary structure. Our approach establishes motif undesignability by searching for rival motifs, rather than exhaustively enumerating all (partial) sequences that could potentially fold into the motif. Furthermore, we exploit rotational invariance in RNA structures to detect, group, and reuse equivalent motifs and to construct a database of unique minimal undesignable motifs. To achieve that, we propose a loop-pair graph representation for motifs and a recursive graph isomorphism algorithm for motif equivalence. Our algorithms successfully identify 24 unique minimal undesignable motifs among 18 undesignable puzzles from the Eterna100 benchmark. Surprisingly, we also find over 350 unique minimal undesignable motifs and 663 undesignable native structures in the ArchiveII dataset, drawn from a diverse set of RNA families. Our source code is available at https://github.com/shanry/RNA-Undesign and our web server is available at http://linearfold.org/motifs.

The choice of nucleic acid sequence for a given protein strongly impacts function and is species-specific. Current protein-to-nucleic-acid translation models treat sequences in isolation, often over-favoring frequently used codons. To generate more natural nucleic acid sequences, we introduce PINATA (Phylogenetically Informed protein to Nucleic Acid Translation with sequence Alignment), a model that leverages sequences from related species encoded in multiple sequence alignments (MSAs) to guide prediction. Our architecture leverages evolutionary context and learns species-and protein specific context to make biologically-informed predictions. Evaluated across 61,934 gene trees and 882 species, PINATA generates sequences that mirror the naturally-occurring sequence substantially better than existing language models. PINATA leverages MSA data to improve exact native codon recovery by 17.95 percentage points over existing language models, effectively preserves natural rare-codon nuances, and more closely matches native sequence properties. PINATA maintains strong predictive performance even with limited evolutionary data. While previous methods largely treated sequences from different species in isolation, our method leverages the evolutionary relationships between nucleic acids and proteins across species to create a more biologically-informed translation. We demonstrate that leveraging rich evolutionary data through an biologically-designed method strongly aids in translating protein sequences to nucleic acid sequences across species. We will make data and code publicly available upon publication.

In this paper, we propose an end-to-end deep learning model, called E2Efold, for RNA secondary structure prediction which can effectively take into account the inherent constraints in the problem. The key idea of E2Efold is to directly predict the RNA base-pairing matrix, and use an unrolled algorithm for constrained programming as the template for deep architectures to enforce constraints. With comprehensive experiments on benchmark datasets, we demonstrate the superior performance of E2Efold: it predicts significantly better structures compared to previous SOTA (especially for pseudoknotted structures), while being as efficient as the fastest algorithms in terms of inference time.

Large Language Models (LLMs), with their remarkable task-handling capabilities and innovative outputs, have catalyzed significant advancements across a spectrum of fields. However, their proficiency within specialized domains such as biomolecular studies remains limited. To address this challenge, we introduce Mol-Instructions, a meticulously curated, comprehensive instruction dataset expressly designed for the biomolecular realm. Mol-Instructions is composed of three pivotal components: molecule-oriented instructions, protein-oriented instructions, and biomolecular text instructions, each curated to enhance the understanding and prediction capabilities of LLMs concerning biomolecular features and behaviors. Through extensive instruction tuning experiments on the representative LLM, we underscore the potency of Mol-Instructions to enhance the adaptability and cognitive acuity of large models within the complex sphere of biomolecular studies, thereby promoting advancements in the biomolecular research community. Mol-Instructions is made publicly accessible for future research endeavors and will be subjected to continual updates for enhanced applicability.

Large language models have already demonstrated their formidable capabilities in general domains, ushering in a revolutionary transformation. However, exploring and exploiting the extensive knowledge of these models to comprehend multi-omics biology remains underexplored. To fill this research gap, we first introduce Biology-Instructions, the first large-scale multi-omics biological sequences-related instruction-tuning dataset including DNA, RNA, proteins, and multi-molecules, designed to bridge the gap between large language models (LLMs) and complex biological sequences-related tasks. This dataset can enhance the versatility of LLMs by integrating diverse biological sequenced-based prediction tasks with advanced reasoning capabilities, while maintaining conversational fluency. Additionally, we reveal significant performance limitations in even state-of-the-art LLMs on biological sequence-related multi-omics tasks without specialized pre-training and instruction-tuning. We further develop a strong baseline called ChatMultiOmics with a novel three-stage training pipeline, demonstrating the powerful ability to understand biology by using Biology-Instructions. Biology-Instructions and ChatMultiOmics are publicly available and crucial resources for enabling more effective integration of LLMs with multi-omics sequence analysis.

Saliency maps are increasingly used as design guidance in siRNA efficacy prediction, yet attribution methods are rarely validated before motivating sequence edits. We introduce a pre-synthesis gate: a protocol for counterfactual sensitivity faithfulness that tests whether mutating high-saliency positions changes model output more than composition-matched controls. Cross-dataset transfer reveals two failure modes that would otherwise go undetected: faithful-but-wrong (saliency valid, predictions fail) and inverted saliency (top-saliency edits less impactful than random). Strikingly, models trained on mRNA-level assays collapse on a luciferase reporter dataset, demonstrating that protocol shifts can silently invalidate deployment. Across four benchmarks, 19/20 fold instances pass; the single failure shows inverted saliency. A biology-informed regularizer (BioPrior) strengthens saliency faithfulness with modest, dataset-dependent predictive trade-offs. Our results establish saliency validation as essential pre-deployment practice for explanation-guided therapeutic design. Code is available at https://github.com/shadi97kh/BioPrior.

Large language models excel at interpreting complex natural language instructions, enabling them to perform a wide range of tasks. In the life sciences, single-cell RNA sequencing (scRNA-seq) data serves as the "language of cellular biology", capturing intricate gene expression patterns at the single-cell level. However, interacting with this "language" through conventional tools is often inefficient and unintuitive, posing challenges for researchers. To address these limitations, we present InstructCell, a multi-modal AI copilot that leverages natural language as a medium for more direct and flexible single-cell analysis. We construct a comprehensive multi-modal instruction dataset that pairs text-based instructions with scRNA-seq profiles from diverse tissues and species. Building on this, we develop a multi-modal cell language architecture capable of simultaneously interpreting and processing both modalities. InstructCell empowers researchers to accomplish critical tasks-such as cell type annotation, conditional pseudo-cell generation, and drug sensitivity prediction-using straightforward natural language commands. Extensive evaluations demonstrate that InstructCell consistently meets or exceeds the performance of existing single-cell foundation models, while adapting to diverse experimental conditions. More importantly, InstructCell provides an accessible and intuitive tool for exploring complex single-cell data, lowering technical barriers and enabling deeper biological insights.

Single-nucleus RNA sequencing (snRNA-seq) has significantly advanced our understanding of the disease etiology of neurodegenerative disorders. However, the low quality of specimens derived from postmortem brain tissues, combined with the high variability caused by disease heterogeneity, makes it challenging to integrate snRNA-seq data from multiple sources for precise analyses. To address these challenges, we present scMamba, a pre-trained model designed to improve the quality and utility of snRNA-seq analysis, with a particular focus on neurodegenerative diseases. Inspired by the recent Mamba model, scMamba introduces a novel architecture that incorporates a linear adapter layer, gene embeddings, and bidirectional Mamba blocks, enabling efficient processing of snRNA-seq data while preserving information from the raw input. Notably, scMamba learns generalizable features of cells and genes through pre-training on snRNA-seq data, without relying on dimension reduction or selection of highly variable genes. We demonstrate that scMamba outperforms benchmark methods in various downstream tasks, including cell type annotation, doublet detection, imputation, and the identification of differentially expressed genes.

Next-generation sequencing technologies, including RNA-sequencing, provide genome-wide measurements of gene expression and enable broad explorations of biomarkers and mechanisms underlying disease and treatment response. Bioinformatics tools for processing this data, such as differential expression analysis, are largely univariate, linear, and rely on predefined pathway knowledge annotations, which limits their ability to capture nonlinear and multivariate gene interactions. This paper explores the application of causal discovery to characterizing transcriptional responses to radiation as a function of dose rate in human cells. By jointly modeling radiation perturbations and gene expression, we learn directed gene networks that capture important regulatory relationships beyond correlation and exhibit significant enrichment of known radiation response pathways compared to baseline approaches. We find that inferred causal graphs reveal structured network features such as high in-degree housekeeping genes and high out-degree transcription factors. Further analysis suggests a hierarchical organization of stress response pathways and triggered cell death pathways. This work highlights the potential of causal discovery in healthcare settings with applications to understanding response mechanisms, identifying regulatory targets, and improving interpretation of complex genomic data.

Scientific measurements such as single-cell RNA (scRNA) sequencing often take the form of nonnegative integer counts, whereas continuous-state diffusion models approximate this discrete structure using continuous coordinates. Building on stochastic chemical reaction networks (CRNs), a class of count-native Markov jump processes, we introduce CRNDiff, a structured framework that combines count-space diffusion with inference-time conditioning on rare subpopulations. An independent birth--death instantiation yields a closed-form transition kernel for forward noising. This kernel enables reverse sampling via forward-filtering backward-sampling (FFBS) and supports data-driven selection of the terminal noising time, eliminating the need for a validation sweep. This tractability also lets us introduce tilted Feynman--Kac (FK) steering, a method for sampling target subpopulations from a frozen generator without retraining. By tilting posterior marginals before FK particle correction, steering mitigates importance-weight concentration when the target population is rare. Using scRNA-seq data from the human heart cell atlas, we test the ability of CRNDiff to generate cell-type-specific distributions. Across the three evaluated target populations, CRNDiff achieves the highest conditional fidelity among the evaluated generative models, with larger mean purity margins for rarer target populations. Generated cells preserve marker-level differential-expression structure. Replacing real training cells for the target classes with generated cells yields downstream classification performance approaching that of the real-data reference.

Transfer RNAs (tRNAs) are universal adaptors of the genetic code, yet their evolutionary dynamics across photosynthetic eukaryotes remain underexplored. Here, we present the largest comparative re-analysis integrating the PlantRNA database with published data to explore tRNA gene evolution. We find that tRNA gene repertoires have been deeply shaped by ecological transitions, genome architecture, and translational demands. Terrestrialization marks a major shift in tRNA evolution, characterized by the loss of selenoproteins and their dedicated selenocysteine tRNAs in land plants compared to algae. Patterns of intron prevalence, position, and structure diverged among lineages, with extensive intron loss occurring around the origin of land plants. Organellar genomes exhibit divergent trajectories: mitochondrial tRNA sets are highly labile due to recurrent gene losses, imports, and horizontal transfers, whereas plastid repertoires are comparatively stable with lineage-specific exceptions. In parallel, angiosperm nuclear tRNA genes exhibit reinforced cis-regulatory elements, consistent with increased and developmentally complex translational demands, and their copy number correlates tightly with codon usage and amino acid composition. Finally, conserved yet family-biased clustering of nuclear tRNA genes reveals contrasting organizational principles in plants versus metazoans. Together, these findings establish tRNA gene evolution as a major determinant of translational capacity and a key driver of photosynthetic diversification.

Multi-stage analytical tasks require LLM agents to use intermediate evidence to decide whether to continue, redirect or stop. Self-reflection, in which an agent critiques its output, is widely studied, yet a critique does not show whether evidence changed the next action. We call that capability self-restraint. Existing agent benchmarks largely measure task completion or output quality and leave it untested. DMAIC-Bench evaluates it with 97 seeded tasks across 15 industrial cases in four sectors, built around Lean Six Sigma's explicit statistical prerequisites. Paired counterfactual variants require opposite actions at the same workflow position, distinguishing warranted restraint from indiscriminate stopping. We assess execution traces with a private scorer and final claims through independent expert review. Across 13 models from six providers, execution-level routing accuracy averages 92% on matched GO decisions and 19% on NO-GO decisions, counting any forbidden downstream computation as a route error. Execution traces show agents reporting correct diagnostics before performing analyses that those results disallow. Separately, blinded expert review of the 11 audited agents estimates that reports act on invalid evidence at 47% of reached NO-GO decisions, with an interval from 31% to 61%. Explicit stopping permission helps some models without consistently restoring correct decisions at both GO and NO-GO forks. Sixteen life-sciences tasks in bulk ribonucleic acid sequencing (RNA-seq) and case-control genome-wide association studies (GWAS) show that the same framework can evaluate evidence-dependent decisions beyond industrial workflows. Project code and data are available at: https://github.com/psptpx/DMAIC-Bench-public.

Reparameterized diffusion models (RDMs) have recently matched autoregressive methods in protein generation, motivating their use for challenging tasks such as designing membrane proteins, which possess interleaved soluble and transmembrane (TM) regions. We introduce the Membrane Diffusion Language Model (MemDLM), a fine-tuned RDM-based protein language model that enables controllable membrane protein sequence design. MemDLM-generated sequences recapitulate the TM residue density and structural features of natural membrane proteins, achieving comparable biological plausibility and outperforming state-of-the-art diffusion baselines in motif scaffolding tasks by producing lower perplexity, higher BLOSUM-62 scores, and improved pLDDT confidence. To enhance controllability, we develop Per-Token Guidance (PET), a novel classifier-guided sampling strategy that selectively solubilizes residues while preserving conserved TM domains, yielding sequences with reduced TM density but intact functional cores. Importantly, MemDLM designs validated in TOXCAT beta-lactamase growth assays demonstrate successful TM insertion, distinguishing high-quality generated sequences from poor ones. Together, our framework establishes the first experimentally-validated diffusion-based model for rational membrane protein generation, integrating de novo design, motif scaffolding, and targeted property optimization.

In an era of increasing pressure to achieve sustainable agriculture, the optimization of livestock feed for enhancing yield and minimizing environmental impact is a paramount objective. This study presents a pioneering approach towards this goal, using rumen microbiome data to predict the efficacy of feed additives in dairy cattle. We collected an extensive dataset that includes methane emissions from 2,190 Holstein cows distributed across 34 distinct sites. The cows were divided into control and experimental groups in a double-blind, unbiased manner, accounting for variables such as age, days in lactation, and average milk yield. The experimental groups were administered one of four leading commercial feed additives: Agolin, Kexxtone, Allimax, and Relyon. Methane emissions were measured individually both before the administration of additives and over a subsequent 12-week period. To develop our predictive model for additive efficacy, rumen microbiome samples were collected from 510 cows from the same herds prior to the study's onset. These samples underwent deep metagenomic shotgun sequencing, yielding an average of 15.7 million reads per sample. Utilizing innovative artificial intelligence techniques we successfully estimated the efficacy of these feed additives across different farms. The model's robustness was further confirmed through validation with independent cohorts, affirming its generalizability and reliability. Our results underscore the transformative capability of using targeted feed additive strategies to both optimize dairy yield and milk composition, and to significantly reduce methane emissions. Specifically, our predictive model demonstrates a scenario where its application could guide the assignment of additives to farms where they are most effective. In doing so, we could achieve an average potential reduction of over 27\% in overall emissions.

Motivation: Interpretability is not optional in biology: understanding gene regulation requires models whose learned structure can be directly interrogated, not merely accurate predictors whose internals resist mapping onto regulatory relationships. We ask whether an architecture mirroring the central dogma yields attention and gradient maps that recover known regulatory elements and networks in inspectable form. Results: Central Dogma Transformer II (CDT-II) mirrors the central dogma in its architecture -- DNA self-attention, RNA self-attention, and DNA-to-RNA cross-attention -- requiring only genomic embeddings and raw per-cell expression. On K562 CRISPR interference (CRISPRi) data with five genes held out entirely, CDT-II predicts perturbation effects (per-gene mean r = 0.84), recovers the GFI1B regulatory network (6.6-fold enrichment, P = 3.5 x 10^-17), and concentrates cross-attention on ENCODE regulatory elements including CTCF sites (mean 7.67x across 28 target genes, P < 0.001). Gradient attribution predicts consequences of perturbing therapeutic targets (mean r = 0.82). For TFRC, target of the anti-TfR1 antibody PPMX-T003, it identifies erythrocyte-structure, iron-dependent DNA-synthesis and oxidative-stress genes, matching anemia and ferroptosis reported clinically and preclinically -- without clinical data as input. CDT-II acts as an AI microscope, surfacing clinically relevant regulatory structure from perturbation experiments alone. Availability: Source code is available at https://github.com/nobusama/CDT2. Pre-computed embeddings, training data, and model weights are available at https://huggingface.co/datasets/nobusama17/CDT2-data.

Protein language models (PLMs) encode rich biological information, yet their internal neuron representations are poorly understood. We introduce the first automated framework for labeling every neuron in a PLM with biologically grounded natural language descriptions. Unlike prior approaches relying on sparse autoencoders or manual annotation, our method scales to hundreds of thousands of neurons, revealing individual neurons are selectively sensitive to diverse biochemical and structural properties. We then develop a novel neuron activation-guided steering method to generate proteins with desired traits, enabling convergence to target biochemical properties like molecular weight and instability index as well as secondary and tertiary structural motifs, including alpha helices and canonical Zinc Fingers. We finally show that analysis of labeled neurons in different model sizes reveals PLM scaling laws and a structured neuron space distribution.

Clinical practice guidelines (CPGs) encode evidence-based decision logic that clinicians apply by evaluating patient variables, conditional criteria, and recommendation rules. However, existing methods often use CPGs as free-text training data or retrieval sources, underutilizing their procedural decision structure. To better exploit this structure, we introduce a guideline-derived training pipeline that transforms CPG recommendations into executable clinical decision logic and uses it to generate factual and counterfactual question-answering data. Theses data teach models both guideline-supported decisions and how decisions change under different patient conditions. Post-training a medical LLM on the generated data yields MedGuideX. Across four clinical reasoning benchmarks, MedGuideX achieves a 10.28% relative improvement in average accuracy. Physician evaluation further shows that MedGuideX better recovers clinician authored reasoning steps and produces physician-preferred rationales in faithfulness, validity, completeness, and clarity. Overall, our results show that executable decision logic from CPGs can be transformed into scalable supervision for building reliable medical LLMs.

Gene expression analysis holds the key to many biomedical discoveries, yet extracting insights from raw transcriptomic data remains formidable due to the complexity of multiple large, semi-structured files and the need for extensive domain expertise. Current automation approaches are often limited by either inflexible workflows that break down in edge cases or by fully autonomous agents that lack the necessary precision for rigorous scientific inquiry. GenoMAS charts a different course by presenting a team of LLM-based scientists that integrates the reliability of structured workflows with the adaptability of autonomous agents. GenoMAS orchestrates six specialized LLM agents through typed message-passing protocols, each contributing complementary strengths to a shared analytic canvas. At the heart of GenoMAS lies a guided-planning framework: programming agents unfold high-level task guidelines into Action Units and, at each juncture, elect to advance, revise, bypass, or backtrack, thereby maintaining logical coherence while bending gracefully to the idiosyncrasies of genomic data. On the GenoTEX benchmark, GenoMAS reaches a Composite Similarity Correlation of 89.13% for data preprocessing and an F_1 of 60.48% for gene identification, surpassing the best prior art by 10.61% and 16.85% respectively. Beyond metrics, GenoMAS surfaces biologically plausible gene-phenotype associations corroborated by the literature, all while adjusting for latent confounders. Code is available at https://github.com/Liu-Hy/GenoMAS.

Advances in natural language processing and large language models have sparked growing interest in modeling DNA, often referred to as the "language of life". However, DNA modeling poses unique challenges. First, it requires the ability to process ultra-long DNA sequences while preserving single-nucleotide resolution, as individual nucleotides play a critical role in DNA function. Second, success in this domain requires excelling at both generative and understanding tasks: generative tasks hold potential for therapeutic and industrial applications, while understanding tasks provide crucial insights into biological mechanisms and diseases. To address these challenges, we propose HybriDNA, a decoder-only DNA language model that incorporates a hybrid Transformer-Mamba2 architecture, seamlessly integrating the strengths of attention mechanisms with selective state-space models. This hybrid design enables HybriDNA to efficiently process DNA sequences up to 131kb in length with single-nucleotide resolution. HybriDNA achieves state-of-the-art performance across 33 DNA understanding datasets curated from the BEND, GUE, and LRB benchmarks, and demonstrates exceptional capability in generating synthetic cis-regulatory elements (CREs) with desired properties. Furthermore, we show that HybriDNA adheres to expected scaling laws, with performance improving consistently as the model scales from 300M to 3B and 7B parameters. These findings underscore HybriDNA's versatility and its potential to advance DNA research and applications, paving the way for innovations in understanding and engineering the "language of life".

With the advent of deep generative models in computational chemistry, in silico anticancer drug design has undergone an unprecedented transformation. While state-of-the-art deep learning approaches have shown potential in generating compounds with desired chemical properties, they disregard the genetic profile and properties of the target disease. Here, we introduce the first generative model capable of tailoring anticancer compounds for a specific biomolecular profile. Using a RL framework, the transcriptomic profiles of cancer cells are used as a context for the generation of candidate molecules. Our molecule generator combines two separately pretrained variational autoencoders (VAEs) - the first VAE encodes transcriptomic profiles into a smooth, latent space which in turn is used to condition a second VAE to generate novel molecular structures on the given transcriptomic profile. The generative process is optimized through PaccMann, a previously developed drug sensitivity prediction model to obtain effective anticancer compounds for the given context (i.e., transcriptomic profile). We demonstrate how the molecule generation can be biased towards compounds with high predicted inhibitory effect against individual cell lines or specific cancer sites. We verify our approach by investigating candidate drugs generated against specific cancer types and find the highest structural similarity to existing compounds with known efficacy against these cancer types. We envision our approach to transform in silico anticancer drug design by leveraging the biomolecular characteristics of the disease in order to increase success rates in lead compound discovery.

Ligand molecule conformation generation is a critical challenge in drug discovery. Deep learning models have been developed to tackle this problem, particularly through the use of generative models in recent years. However, these models often generate conformations that lack meaningful structure and randomness due to the absence of essential side information. Examples of such side information include the chemical and geometric features of the target protein, ligand-target compound interactions, and ligand chemical properties. Without these constraints, the generated conformations may not be suitable for further selection and design of new drugs. To address this limitation, we propose a novel method for generating ligand conformations that leverage side information and incorporate flexible constraints into standard diffusion models. Drawing inspiration from the concept of message passing, we introduce ligand-target massage passing block, a mechanism that facilitates the exchange of information between target nodes and ligand nodes, thereby incorporating target node features. To capture non-covalent interactions, we introduce ligand-target compound inter and intra edges. To further improve the biological relevance of the generated conformations, we train energy models using scalar chemical features. These models guide the progress of the standard Denoising Diffusion Probabilistic Models, resulting in more biologically meaningful conformations. We evaluate the performance of SIDEGEN using the PDBBind-2020 dataset, comparing it against other methods. The results demonstrate improvements in both Aligned RMSD and Ligand RMSD evaluations. Specifically, our model outperforms GeoDiff (trained on PDBBind-2020) by 20% in terms of the median aligned RMSD metric.

Understanding and designing biomolecules, such as proteins and small molecules, is central to advancing drug discovery, synthetic biology, and enzyme engineering. Recent breakthroughs in Artificial Intelligence (AI) have revolutionized biomolecular research, achieving remarkable accuracy in biomolecular prediction and design. However, a critical gap remains between AI's computational power and researchers' intuition, using natural language to align molecular complexity with human intentions. Large Language Models (LLMs) have shown potential to interpret human intentions, yet their application to biomolecular research remains nascent due to challenges including specialized knowledge requirements, multimodal data integration, and semantic alignment between natural language and biomolecules. To address these limitations, we present InstructBioMol, a novel LLM designed to bridge natural language and biomolecules through a comprehensive any-to-any alignment of natural language, molecules, and proteins. This model can integrate multimodal biomolecules as input, and enable researchers to articulate design goals in natural language, providing biomolecular outputs that meet precise biological needs. Experimental results demonstrate InstructBioMol can understand and design biomolecules following human instructions. Notably, it can generate drug molecules with a 10% improvement in binding affinity and design enzymes that achieve an ESP Score of 70.4, making it the only method to surpass the enzyme-substrate interaction threshold of 60.0 recommended by the ESP developer. This highlights its potential to transform real-world biomolecular research.

Robust advances in interactome analysis demand comprehensive, non-redundant and consistently annotated datasets. By non-redundant, we mean that the accounting of evidence for every interaction should be faithful: each independent experimental support is counted exactly once, no more, no less. While many interactions are shared among public repositories, none of them contains the complete known interactome for any model organism. In addition, the annotations of the same experimental result by different repositories often disagree. This brings up the issue of which annotation to keep while consolidating evidences that are the same. The iRefIndex database, including interactions from most popular repositories with a standardized protein nomenclature, represents a significant advance in all aspects, especially in comprehensiveness. However, iRefIndex aims to maintain all information/annotation from original sources and requires users to perform additional processing to fully achieve the aforementioned goals. To address issues with iRefIndex and to achieve our goals, we have developed ppiTrim, a script that processes iRefIndex to produce non-redundant, consistently annotated datasets of physical interactions. Our script proceeds in three stages: mapping all interactants to gene identifiers and removing all undesired raw interactions, deflating potentially expanded complexes, and reconciling for each interaction the annotation labels among different source databases. As an illustration, we have processed the three largest organismal datasets: yeast, human and fruitfly. While ppiTrim can resolve most apparent conflicts between different labelings, we also discovered some unresolvable disagreements mostly resulting from different annotation policies among repositories. URL: http://www.ncbi.nlm.nih.gov/CBBresearch/Yu/downloads/ppiTrim.html

There are substantial instructional videos on the Internet, which provide us tutorials for completing various tasks. Existing instructional video datasets only focus on specific steps at the video level, lacking experiential guidelines at the task level, which can lead to beginners struggling to learn new tasks due to the lack of relevant experience. Moreover, the specific steps without guidelines are trivial and unsystematic, making it difficult to provide a clear tutorial. To address these problems, we present the GUIDE (Guideline-Guided) dataset, which contains 3.5K videos of 560 instructional tasks in 8 domains related to our daily life. Specifically, we annotate each instructional task with a guideline, representing a common pattern shared by all task-related videos. On this basis, we annotate systematic specific steps, including their associated guideline steps, specific step descriptions and timestamps. Our proposed benchmark consists of three sub-tasks to evaluate comprehension ability of models: (1) Step Captioning: models have to generate captions for specific steps from videos. (2) Guideline Summarization: models have to mine the common pattern in task-related videos and summarize a guideline from them. (3) Guideline-Guided Captioning: models have to generate captions for specific steps under the guide of guideline. We evaluate plenty of foundation models with GUIDE and perform in-depth analysis. Given the diversity and practicality of GUIDE, we believe that it can be used as a better benchmark for instructional video comprehension.

Image captioning is conventionally formulated as the task of generating captions for images that match the distribution of reference image-caption pairs. However, reference captions in standard captioning datasets are short and may not uniquely identify the images they describe. These problems are further exacerbated when models are trained directly on image-alt text pairs collected from the internet. In this work, we show that it is possible to generate more specific captions with minimal changes to the training process. We implement classifier-free guidance for an autoregressive captioning model by fine-tuning it to estimate both conditional and unconditional distributions over captions. The guidance scale applied at decoding controls a trade-off between maximizing p(caption|image) and p(image|caption). Compared to standard greedy decoding, decoding with a guidance scale of 2 substantially improves reference-free metrics such as CLIPScore (0.808 vs. 0.775) and captiontoimage retrieval performance in the CLIP embedding space (recall@1 44.6% vs. 26.5%), but worsens standard reference-based captioning metrics (e.g., CIDEr 78.6 vs 126.1). We further explore the use of language models to guide the decoding process, obtaining small improvements over the Pareto frontier of reference-free vs. reference-based captioning metrics that arises from classifier-free guidance, and substantially improving the quality of captions generated from a model trained only on minimally curated web data.

We study inference-time scaling for diffusion models, where the goal is to adapt a pre-trained model to new target distributions without retraining. Existing guidance-based methods are simple but introduce bias, while particle-based corrections suffer from weight degeneracy and high computational cost. We introduce DriftLite, a lightweight, training-free particle-based approach that steers the inference dynamics on the fly with provably optimal stability control. DriftLite exploits a previously unexplored degree of freedom in the Fokker-Planck equation between the drift and particle potential, and yields two practical instantiations: Variance- and Energy-Controlling Guidance (VCG/ECG) for approximating the optimal drift with minimal overhead. Across Gaussian mixture models, particle systems, and large-scale protein-ligand co-folding problems, DriftLite consistently reduces variance and improves sample quality over pure guidance and sequential Monte Carlo baselines. These results highlight a principled, efficient route toward scalable inference-time adaptation of diffusion models.

Antibody lead optimization calls for a small, bounded set of edits to an existing candidate: substitutions, but also insertions and deletions. Edit-based generative models are the only ones that allocate such an edit budget without fixing the edit positions, the edit count, or the output length in advance. However, the existing approaches Edit Flows and EvoFlows did not release code or complete training specifications. Here, we show that both methods follow the same underlying process -- edits firing one at a time, at learned rates, in continuous time -- the pure-jump case of generator matching over finite sequences. With EditJumps we introduce the first open implementation of this framework, with a single generalist antibody editor trained on 1.66M Observed Antibody Space homolog pairs to propose homolog-like variants of a seed sequence, editing unseen leads zero-shot, without the per-family retraining original approaches require. Replicating this system from scratch exposes why open code is essential for generative biology: reconciling published edit distributions required reverse-engineering an undocumented rate-scaling hyperparameter that dictates realized mutation counts. Moreover, we show that published evaluation metrics are highly sensitive to reference sample size, frequently flipping method rankings. We release our full codebase, automated test suite, and configurations at: https://github.com/VisiumCH/editjumps

Motivation: The development of novel compounds targeting proteins of interest is one of the most important tasks in the pharmaceutical industry. Deep generative models have been applied to targeted molecular design and have shown promising results. Recently, target-specific molecule generation has been viewed as a translation between the protein language and the chemical language. However, such a model is limited by the availability of interacting protein-ligand pairs. On the other hand, large amounts of unlabeled protein sequences and chemical compounds are available and have been used to train language models that learn useful representations. In this study, we propose exploiting pretrained biochemical language models to initialize (i.e. warm start) targeted molecule generation models. We investigate two warm start strategies: (i) a one-stage strategy where the initialized model is trained on targeted molecule generation (ii) a two-stage strategy containing a pre-finetuning on molecular generation followed by target specific training. We also compare two decoding strategies to generate compounds: beam search and sampling. Results: The results show that the warm-started models perform better than a baseline model trained from scratch. The two proposed warm-start strategies achieve similar results to each other with respect to widely used metrics from benchmarks. However, docking evaluation of the generated compounds for a number of novel proteins suggests that the one-stage strategy generalizes better than the two-stage strategy. Additionally, we observe that beam search outperforms sampling in both docking evaluation and benchmark metrics for assessing compound quality. Availability and implementation: The source code is available at https://github.com/boun-tabi/biochemical-lms-for-drug-design and the materials are archived in Zenodo at https://doi.org/10.5281/zenodo.6832145

We introduce a novel score-based diffusion framework named Twigs that incorporates multiple co-evolving flows for enriching conditional generation tasks. Specifically, a central or trunk diffusion process is associated with a primary variable (e.g., graph structure), and additional offshoot or stem processes are dedicated to dependent variables (e.g., graph properties or labels). A new strategy, which we call loop guidance, effectively orchestrates the flow of information between the trunk and the stem processes during sampling. This approach allows us to uncover intricate interactions and dependencies, and unlock new generative capabilities. We provide extensive experiments to demonstrate strong performance gains of the proposed method over contemporary baselines in the context of conditional graph generation, underscoring the potential of Twigs in challenging generative tasks such as inverse molecular design and molecular optimization.

Medical guidelines encode rich, evidence-based decision logic, yet the specific decision artifact a clinician needs is hard to locate within a guideline, let alone across guidelines covering plausible diseases and treatments. While guideline passages have supported end-to-end question answering, flowcharts remain largely underused in decision support despite their ability to encode actionable clinical pathways. We therefore introduce Case2Flow, a task designed to retrieve the most relevant guideline flowchart for a given patient case from a collection of guideline documents. To support it, we construct FlowAtlas, a curated corpus of 202 flowcharts extracted from 2,080 medical guidelines, together with a pipeline that synthesises 1,911 aligned case-flowchart pairs. Our evaluation of multimodal retrieval methods reveals systematic failure modes, including overreliance on keywords and spurious token-patch matches induced by uninformative background regions in flowcharts. Motivated by this, we propose CRISP, a training-free scoring method that sharpens late-interaction retrieval by suppressing uninformative patches, discounting ambiguous token matches, and incorporating bidirectional query-image alignment. CRISP improves Recall@1 by up to 18.71 percentage points, while a blinded physician assessment on published case narratives provides preliminary feasibility evidence beyond synthetic queries.

The National Comprehensive Cancer Network (NCCN) provides evidence-based guidelines for cancer treatment. Translating complex patient presentations into guideline-compliant treatment recommendations is time-intensive, requires specialized expertise, and is prone to error. Advances in large language model (LLM) capabilities promise to reduce the time required to generate treatment recommendations and improve accuracy. We present an LLM agent-based approach to automatically generate guideline-concordant treatment trajectories for patients with non-small cell lung cancer (NSCLC). Our contributions are threefold. First, we construct a novel longitudinal dataset of 121 cases of NSCLC patients that includes clinical encounters, diagnostic results, and medical histories, each expertly annotated with the corresponding NCCN guideline trajectories by board-certified oncologists. Second, we demonstrate that existing LLMs possess domain-specific knowledge that enables high-quality proxy benchmark generation for both model development and evaluation, achieving strong correlation (Spearman coefficient r=0.88, RMSE = 0.08) with expert-annotated benchmarks. Third, we develop a hybrid approach combining expensive human annotations with model consistency information to create both the agent framework that predicts the relevant guidelines for a patient, as well as a meta-classifier that verifies prediction accuracy with calibrated confidence scores for treatment recommendations (AUROC=0.800), a critical capability for communicating the accuracy of outputs, custom-tailoring tradeoffs in performance, and supporting regulatory compliance. This work establishes a framework for clinically viable LLM-based guideline adherence systems that balance accuracy, interpretability, and regulatory requirements while reducing annotation costs, providing a scalable pathway toward automated clinical decision support.

During times of increasing antibiotic resistance and the spread of infectious diseases like COVID-19, it is important to classify genes related to antibiotic resistance. As natural language processing has advanced with transformer-based language models, many language models that learn characteristics of nucleotide sequences have also emerged. These models show good performance in classifying various features of nucleotide sequences. When classifying nucleotide sequences, not only the sequence itself, but also various background knowledge is utilized. In this study, we use not only a nucleotide sequence-based language model but also a text language model based on PubMed articles to reflect more biological background knowledge in the model. We propose a method to fine-tune the nucleotide sequence language model and the text language model based on various databases of antibiotic resistance genes. We also propose an LLM-based augmentation technique to supplement the data and an ensemble method to effectively combine the two models. We also propose a benchmark for evaluating the model. Our method achieved better performance than the nucleotide sequence language model in the drug resistance class prediction.

Motivation: The gut microbiota has recently emerged as a key factor that underpins certain connections between diet and human health. A tremendous amount of knowledge has been amassed from experimental studies on diet, human metabolism and microbiome. However, this evidence remains mostly buried in scientific publications, and biomedical literature mining in this domain remains scarce. We developed DiMB-RE, a comprehensive corpus annotated with 15 entity types (e.g., Nutrient, Microorganism) and 13 relation types (e.g., increases, improves) capturing diet-microbiome associations. We also trained and evaluated state-of-the-art natural language processing (NLP) models for named entity, trigger, and relation extraction as well as factuality detection using DiMB-RE. Results: DiMB-RE consists of 14,450 entities and 4,206 relationships from 165 articles. While NLP models performed reasonably well for named entity recognition (0.760 F_{1}), end-to-end relation extraction performance was modest (0.356 F_{1}), partly due to missed entities and triggers as well as cross-sentence relations. Conclusions: To our knowledge, DiMB-RE is largest and most diverse dataset focusing on diet-microbiome interactions. It can serve as a benchmark corpus for biomedical literature mining. Availability: DiMB-RE and the NLP models are available at https://github.com/ScienceNLP-Lab/DiMB-RE.

Given an unconditional generative model and a predictor for a target property (e.g., a classifier), the goal of training-free guidance is to generate samples with desirable target properties without additional training. As a highly efficient technique for steering generative models toward flexible outcomes, training-free guidance has gained increasing attention in diffusion models. However, existing methods only handle data in continuous spaces, while many scientific applications involve both continuous and discrete data (referred to as multimodality). Another emerging trend is the growing use of the simple and general flow matching framework in building generative foundation models, where guided generation remains under-explored. To address this, we introduce TFG-Flow, a novel training-free guidance method for multimodal generative flow. TFG-Flow addresses the curse-of-dimensionality while maintaining the property of unbiased sampling in guiding discrete variables. We validate TFG-Flow on four molecular design tasks and show that TFG-Flow has great potential in drug design by generating molecules with desired properties.

Large language models can reason over biological knowledge, but they are not naturally equipped to work with quantitative omics measurements. Existing approaches either convert expression profiles into long textual representations, often losing quantitative information, or connect omics encoders to language models for narrow tasks. We introduce OmicsLM, a 9B multimodal language model that represents each bulk or single-cell transcriptome as a compact continuous embedding that can be interleaved with natural-language instructions and with other samples in the same context. An key contribution is a training corpus that connects experimental measurements with biological knowledge and task supervision. We combine templates linking transcriptomic profiles to annotations and experimental outcomes, reasoning examples connecting evidence across sources, and LLM-generated supervision with task-specific quality checks. The instruction-tuning corpus spans 157 biological and general-purpose task groups. Training includes continued pretraining on 20 billion tokens and supervised fine-tuning on 5.21 million conversations. We further introduce GEO-OmicsQA, a publication-disjoint benchmark of 3,000 questions requiring models to interpret and compare expression profiles from real GEO studies. OmicsLM achieves the best results among the evaluated models on three of four held-out annotation tasks and on all six GEO-OmicsQA variants, and the best average performance among compared methods on PerturbQA perturbation-response prediction. Ablations show a clear advantage for continuous omics representations over a text-only gene-list representation. Together, these results show that quantitative transcriptomic measurements and biological language can be integrated within a general conversational model, enabling both predictive tasks and language-guided interpretation of experimental samples.

Molecules play a crucial role in biomedical research and discovery, particularly in the field of small molecule drug development. Given the rapid advancements in large language models, especially the recent emergence of reasoning models, it is natural to explore how a general-purpose language model can be efficiently adapted for molecular science applications. In this work, we introduce BioMedGPT-Mol, a molecular language model designed to support molecular understanding and generation tasks. By curating and unifying existing public instruction datasets, we have assembled a large-scale, comprehensive, and high-quality training dataset. The model is then fine-tuned through a meticulously designed multi-task learning framework. On a consolidated benchmark derived from LlaSMol, TOMG-Bench, and MuMOInstruct, BioMedGPT-Mol achieves remarkable performance. Our experimental results demonstrate that a general-purpose reasoning model can be effectively and efficiently post-trained into a professional molecular language model through a well-structured multi-task curriculum. Leveraging these capabilities, we further apply the model to multi-step retrosynthetic planning, achieving state-of-the-art performance on RetroBench and demonstrating its superior efficacy as an end-to-end retrosynthetic planner. We anticipate that our approach can be extended to other biomedical scientific domains.

Pre-trained large language models demonstrate potential in extracting information from DNA sequences, yet adapting to a variety of tasks and data modalities remains a challenge. To address this, we propose DNAGPT, a generalized DNA pre-training model trained on over 200 billion base pairs from all mammals. By enhancing the classic GPT model with a binary classification task (DNA sequence order), a numerical regression task (guanine-cytosine content prediction), and a comprehensive token language, DNAGPT can handle versatile DNA analysis tasks while processing both sequence and numerical data. Our evaluation of genomic signal and region recognition, mRNA abundance regression, and artificial genomes generation tasks demonstrates DNAGPT's superior performance compared to existing models designed for specific downstream tasks, benefiting from pre-training using the newly designed model structure.

Typical diffusion models are trained to accept a particular form of conditioning, most commonly text, and cannot be conditioned on other modalities without retraining. In this work, we propose a universal guidance algorithm that enables diffusion models to be controlled by arbitrary guidance modalities without the need to retrain any use-specific components. We show that our algorithm successfully generates quality images with guidance functions including segmentation, face recognition, object detection, and classifier signals. Code is available at https://github.com/arpitbansal297/Universal-Guided-Diffusion.

Personalizing text-to-image diffusion models is crucial for adapting the pre-trained models to specific target concepts, enabling diverse image generation. However, fine-tuning with few images introduces an inherent trade-off between aligning with the target distribution (e.g., subject fidelity) and preserving the broad knowledge of the original model (e.g., text editability). Existing sampling guidance methods, such as classifier-free guidance (CFG) and autoguidance (AG), fail to effectively guide the output toward well-balanced space: CFG restricts the adaptation to the target distribution, while AG compromises text alignment. To address these limitations, we propose personalization guidance, a simple yet effective method leveraging an unlearned weak model conditioned on a null text prompt. Moreover, our method dynamically controls the extent of unlearning in a weak model through weight interpolation between pre-trained and fine-tuned models during inference. Unlike existing guidance methods, which depend solely on guidance scales, our method explicitly steers the outputs toward a balanced latent space without additional computational overhead. Experimental results demonstrate that our proposed guidance can improve text alignment and target distribution fidelity, integrating seamlessly with various fine-tuning strategies.

Single-cell transcriptomics enabled the study of cellular heterogeneity in response to perturbations at the resolution of individual cells. However, scaling high-throughput screens (HTSs) to measure cellular responses for many drugs remains a challenge due to technical limitations and, more importantly, the cost of such multiplexed experiments. Thus, transferring information from routinely performed bulk RNA HTS is required to enrich single-cell data meaningfully. We introduce chemCPA, a new encoder-decoder architecture to study the perturbational effects of unseen drugs. We combine the model with an architecture surgery for transfer learning and demonstrate how training on existing bulk RNA HTS datasets can improve generalisation performance. Better generalisation reduces the need for extensive and costly screens at single-cell resolution. We envision that our proposed method will facilitate more efficient experiment designs through its ability to generate in-silico hypotheses, ultimately accelerating drug discovery.

It is increasingly common to encounter data from dynamic processes captured by static cross-sectional measurements over time, particularly in biomedical settings. Recent attempts to model individual trajectories from this data use optimal transport to create pairwise matchings between time points. However, these methods cannot model continuous dynamics and non-linear paths that entities can take in these systems. To address this issue, we establish a link between continuous normalizing flows and dynamic optimal transport, that allows us to model the expected paths of points over time. Continuous normalizing flows are generally under constrained, as they are allowed to take an arbitrary path from the source to the target distribution. We present TrajectoryNet, which controls the continuous paths taken between distributions to produce dynamic optimal transport. We show how this is particularly applicable for studying cellular dynamics in data from single-cell RNA sequencing (scRNA-seq) technologies, and that TrajectoryNet improves upon recently proposed static optimal transport-based models that can be used for interpolating cellular distributions.

Language models have emerged as powerful predictors of the viability of biological sequences. During training these models learn the rules of the grammar obeyed by sequences of amino acids or nucleotides. Once trained, these models can take a sequence as input and produce a likelihood score as an output; a higher likelihood implies adherence to the learned grammar and correlates with experimental fitness measurements. Here we show that in-context learning can distort the relationship between fitness and likelihood scores of sequences. This phenomenon most prominently manifests as anomalously high likelihood scores for sequences that contain repeated motifs. We use protein language models with different architectures trained on the masked language modeling objective for our experiments, and find transformer-based models to be particularly vulnerable to this effect. This behavior is mediated by a look-up operation where the model seeks the identity of the masked position by using the other copy of the repeated motif as a reference. This retrieval behavior can override the model's learned priors. This phenomenon persists for imperfectly repeated sequences, and extends to other kinds of biologically relevant features such as reversed complement motifs in RNA sequences that fold into hairpin structures.

[Abridged] This review paper discussed which chemical effects may be at play in a planet-forming disk midplane, which effects are relevant under different conditions, and which tools are available for modelling chemical kinetics in a disk midplane. The review goes on to discuss some important efforts in the planet formation modelling community to treat chemical evolution, and, vice versa, efforts in the chemical modelling community to implement more physical effects related to planet formation into the chemical modelling. The aim of this review is both to outline some concepts related to planet formation chemistry, but also to encourage, not just collaboration between the planet formation modelling community and the astrochemical community, but also assistance and guidance from one community to the other. Guidance, regarding which effects, out of many, might be more relevant than others under certain planet formation conditions, and regarding why certain included effects lead to certain important modelling outcomes. As the research fields of exoplanet atmospheres and protoplanetary disks near new frontiers in observational insights with upcoming facilities, developing appropriate modelling frameworks (including physical and chemical effects) is paramount to ultimately enable the linking of a chemically characterised exoplanet atmospheres to its formation history in its natal protoplanetary disk.

TRPM4 is overexpressed in prostate cancer (PCa) associated with metastasis or recurrence. There is paucity of information pertaining to TRPM4 characterization and functions at single-cell level in PCa. In this study, generalized additive model (GAM) was utilized to model the relationship between TRPM4 and genes shortlisted using Spearman-Kendall dual-filter in aggressive PCa and benign prostate (BP) control cells derived from scRNA-seq dataset. Seven ribosomal genes (RPL10, RPL27, RPL28, RPS2, RPS8, RPS12, and RPS26; averaged into Ribo as the gene set), passed the dual-filter specifically in PCa cells. GAM modeling of TRPM4-Ribo significantly outperformed TRPM4 modeling with alternative cancer gene sets (GSK-3B, mTOR, NF-KB, PI3K/AKT, and Wnt). Cell explanatory power (CEP) classification was devised and verified by cross-validation to identify individual PCa cells most well-predicted by the model. CEP classification binarized PCa cells into top-ranked explanatory power (TREP; more well-predicted by the model) and non-TREP cells. In TRPM4-Ribo GAM plots, distribution pattern of TREP cells shifted at an inflection point (IP) i.e., the specific TRPM4 expression value that further binarized the plot into pre-IP (TRPM4 values below IP) and post-IP (TRPM4 values above IP) regions, producing a quadrant of TREP versus non-TREP cells for each PCa patient. Gene Ontology (GO) enrichment analysis showed that pre-IP TREP cells enriched for immune-related GOs, while post-IP TREP cells enriched for ribosomal, translation, and cell adhesion GOs. In conclusion, the CEP-IP framework based on pairwise genes produces quadrants of cancer cell subpopulations, enabling the identification of distinctive biology with potential therapeutic implications.

Biomolecular interactions underpin almost all biological processes, and their rational design is central to programming new biological functions. Generative AI models have emerged as powerful tools for molecular design, yet most remain specialized for individual molecular types and lack fine-grained control over interaction details. Here we present ODesign, an all-atom generative world model for all-to-all biomolecular interaction design. ODesign allows scientists to specify epitopes on arbitrary targets and generate diverse classes of binding partners with fine-grained control. Across entity-, token-, and atom-level benchmarks in the protein modality, ODesign demonstrates superior controllability and performance to modality-specific baselines. Extending beyond proteins, it generalizes to nucleic acid and small-molecule design, enabling interaction types such as protein-binding RNA/DNA and RNA/DNA-binding ligands that were previously inaccessible. By unifying multimodal biomolecular interactions within a single generative framework, ODesign moves toward a general-purpose molecular world model capable of programmable design. ODesign is available at https://odesign.lglab.ac.cn ,

Classifier-free guidance (CFG) is an essential mechanism in contemporary text-driven diffusion models. In practice, in controlling the impact of guidance we can see the trade-off between the quality of the generated images and correspondence to the prompt. When we use strong guidance, generated images fit the conditioned text perfectly but at the cost of their quality. Dually, we can use small guidance to generate high-quality results, but the generated images do not suit our prompt. In this paper, we present beta-CFG (beta-adaptive scaling in Classifier-Free Guidance), which controls the impact of guidance during generation to solve the above trade-off. First, beta-CFG stabilizes the effects of guiding by gradient-based adaptive normalization. Second, beta-CFG uses the family of single-modal (beta-distribution), time-dependent curves to dynamically adapt the trade-off between prompt matching and the quality of samples during the diffusion denoising process. Our model obtained better FID scores, maintaining the text-to-image CLIP similarity scores at a level similar to that of the reference CFG.

Large language models (LLMs) trained on text demonstrated remarkable results on natural language processing (NLP) tasks. These models have been adapted to decipher the language of DNA, where sequences of nucleotides act as "words" that encode genomic functions. However, the genome differs fundamentally from natural language, as it lacks clearly defined words or a consistent grammar. Although DNA language models (DNALMs) such as DNABERT, GENA-LM have achieved high level of performance on genome-related biological tasks, these models do not encode biological functions in the presence of sequence variations. To address this problem, we pre-train foundation models that effectively integrate sequence variations, in particular Single Nucleotide Polymorphisms (SNPs), as they underlie important biological functions. Specifically, we use ModernBERT to pre-train two different Biomedical Foundation Models (BMFM), namely, BMFM-DNA-REF in which the model is trained with sequences of varying lengths along with their reverse complements derived from the reference genome and BMFM-DNA-SNP in which the model is trained with sequences created using a novel representation scheme that encodes sequence variations. Our findings indicate that integrating sequence variations into DNALMs helps capture the biological functions as seen in improvements on all fine-tuning tasks. To explore the model's practical utility, we experimented with various strategies for SNP imputation on promoter detection task introduced in DNABERT-2. However, we acknowledge that the current benchmarks are limited in their ability to fully evaluate these models. To enable more comprehensive assessment in the future and encourage community contributions, we release our models through HuggingFace and the code to reproduce the results at https://github.com/BiomedSciAI/biomed-multi-omic

We present SciRIFF (Scientific Resource for Instruction-Following and Finetuning), a dataset of 137K instruction-following demonstrations for 54 tasks covering five essential scientific literature understanding capabilities: information extraction, summarization, question answering, claim verification, and classification. SciRIFF demonstrations are notable for their long input contexts, detailed task specifications, and complex structured outputs. While instruction-following resources are available in specific domains such as clinical medicine and chemistry, SciRIFF is the first dataset focused on extracting and synthesizing information from research literature across a wide range of scientific fields. To demonstrate the utility of SciRIFF, we develop a sample-efficient strategy to adapt a general instruction-following model for science by performing additional finetuning on a mix of general-domain and SciRIFF demonstrations. In evaluations on nine held-out scientific tasks, our model -- called SciTulu -- improves over a strong LLM baseline by 28.1% and 6.5% at the 7B and 70B scales respectively, while maintaining general instruction-following performance within 2% of the baseline. We are optimistic that SciRIFF will facilitate the development and evaluation of LLMs to help researchers navigate the ever-growing body of scientific literature. We release our dataset, model checkpoints, and data processing and evaluation code to enable further research.

Drug discovery typically consists of multiple steps, including identifying a target protein key to a disease's etiology, validating that interacting with this target could prevent symptoms or cure the disease, discovering a small molecule or biologic therapeutic to interact with it, and optimizing the candidate molecule through a complex landscape of required properties. Drug discovery related tasks often involve prediction and generation while considering multiple entities that potentially interact, which poses a challenge for typical AI models. For this purpose we present MAMMAL - Molecular Aligned Multi-Modal Architecture and Language - a method that we applied to create a versatile multi-task foundation model ibm/biomed.omics.bl.sm.ma-ted-458m that learns from large-scale biological datasets (2 billion samples) across diverse modalities, including proteins, small molecules, and genes. We introduce a prompt syntax that supports a wide range of classification, regression, and generation tasks. It allows combining different modalities and entity types as inputs and/or outputs. Our model handles combinations of tokens and scalars and enables the generation of small molecules and proteins, property prediction, and transcriptomic lab test predictions. We evaluated the model on 11 diverse downstream tasks spanning different steps within a typical drug discovery pipeline, where it reaches new SOTA in 9 tasks and is comparable to SOTA in 2 tasks. This performance is achieved while using a unified architecture serving all tasks, in contrast to the original SOTA performance achieved using tailored architectures. The model code and pretrained weights are publicly available at https://github.com/BiomedSciAI/biomed-multi-alignment and https://huggingface.co/ibm/biomed.omics.bl.sm.ma-ted-458m.

Text-to-image diffusion models can generate diverse, high-fidelity images based on user-provided text prompts. Recent research has extended these models to support text-guided image editing. While text guidance is an intuitive editing interface for users, it often fails to ensure the precise concept conveyed by users. To address this issue, we propose Custom-Edit, in which we (i) customize a diffusion model with a few reference images and then (ii) perform text-guided editing. Our key discovery is that customizing only language-relevant parameters with augmented prompts improves reference similarity significantly while maintaining source similarity. Moreover, we provide our recipe for each customization and editing process. We compare popular customization methods and validate our findings on two editing methods using various datasets.

Following clinical decision pathways (CDPs) defined by clinical practice guidelines is essential for safe and reliable medical decision-making. However, existing medical large language model (LLM) benchmarks mainly evaluate final-answer accuracy, providing limited evaluation of models' ability to adhere to guidelines. To address this gap, we introduce MEGA-CDP, a benchmark for evaluating whether medical LLMs can generate guideline-adherent CDPs using provided guidelines as references. MEGA-CDP is constructed from 2,274 English and Chinese clinical practice guidelines through a guideline-to-case pipeline, yielding 42,353 clinical cases with explicit reference CDPs. It supports both single-turn vignette and multi-turn interactive settings, and introduces a CDP-oriented evaluation framework for measuring pathway consistency. Experiments on 16 representative LLMs show that reliable clinical decision support remains challenging for current models, demonstrating the need for CDP-oriented evaluation and the value of MEGA-CDP for advancing guideline adherence in medical LLMs.

Foundation models for single-cell RNA sequencing (scRNA-seq) have shown promising capabilities in capturing gene expression patterns. However, current approaches face critical limitations: they ignore biological prior knowledge encoded in gene regulatory relationships and fail to leverage multi-omics signals that could provide complementary regulatory insights. In this paper, we propose GRNFormer, a new framework that systematically integrates multi-scale Gene Regulatory Networks (GRNs) inferred from multi-omics data into RNA foundation model training. Our framework introduces two key innovations. First, we introduce a pipeline for constructing hierarchical GRNs that capture regulatory relationships at both cell-type-specific and cell-specific resolutions. Second, we design a structure-aware integration framework that addresses the information asymmetry in GRNs through two technical advances: (1) A graph topological adapter using multi-head cross-attention to weight regulatory relationships dynamically, and (2) a novel edge perturbation strategy that perturb GRNs with biologically-informed co-expression links to augment graph neural network training. Comprehensive experiments have been conducted on three representative downstream tasks across multiple model architectures to demonstrate the effectiveness of GRNFormer. It achieves consistent improvements over state-of-the-art (SoTA) baselines: 3.6% increase in drug response prediction correlation, 9.6% improvement in single-cell drug classification AUC, and 1.1% average gain in gene perturbation prediction accuracy.

Clinical trials in the UK can cost up to £1.3 million, with approximately 90% drug failure rate. Toxicity is a major contributing factor in drug failure. Testing is time and cost intensive. In recent years, the use of artificial intelligence has been increasingly explored to aid in the prediction of drug toxicity, with extensive use of large language models (LLMs). However, LLMs can show considerable variation when minor changes are made to prompts, which raises concerns about their sensitivity to prompt engineering. Prompt engineering is used to optimise a prompt given to an LLM to generate the desired output. This paper proposes a method to analyse prompt engineering for drug toxicity prediction. The aim of the paper is to investigate the importance of prompt phrasing for drug toxicity prediction. LLMs were prompted to identify chemical properties of significance when predicting drug toxicity. Prompts were constructed to investigate; job role, prompt structuring, and rule interpretation. LLMs were then used to generate datasets, using the identified features from initial prompting, which were then passed to machine learning algorithms. The experiments show that the natural variance which occurs in LLMs outweighs any fine-tuning of prompts. There were, however, substantial improvements in model performance when using chemoinformatic code to extract features instead of using LLM-generated values. The proposed analysis methodology is applicable to a wide range of prompt types across different areas of bioinformatics.

Nucleotide sequence variation can induce significant shifts in functional fitness. Recent nucleotide foundation models promise to predict such fitness effects directly from sequence, yet heterogeneous datasets and inconsistent preprocessing make it difficult to compare methods fairly across DNA and RNA families. Here we introduce NABench, a large-scale, systematic benchmark for nucleic acid fitness prediction. NABench aggregates 162 high-throughput assays and curates 2.6 million mutated sequences spanning diverse DNA and RNA families, with standardized splits and rich metadata. We show that NABench surpasses prior nucleotide fitness benchmarks in scale, diversity, and data quality. Under a unified evaluation suite, we rigorously assess 29 representative foundation models across zero-shot, few-shot prediction, transfer learning, and supervised settings. The results quantify performance heterogeneity across tasks and nucleic-acid types, demonstrating clear strengths and failure modes for different modeling choices and establishing strong, reproducible baselines. We release NABench to advance nucleic acid modeling, supporting downstream applications in RNA/DNA design, synthetic biology, and biochemistry. Our code is available at https://github.com/mrzzmrzz/NABench.

Predicting transcriptional responses to genetic perturbations is central to understanding gene function. Existing predictors primarily rely on transcriptomic measurements, although chromatin accessibility provides complementary information about the cellular context in which perturbations act. Using this information requires linking chromatin context to specific perturbations and accounting for baseline differences between independently sampled control and perturbed populations. We propose ChromaPert, a chromatin-informed framework for predicting state-dependent perturbation responses. ChromaPert combines molecular and DNA-informed locus priors with paired control RNA--ATAC features to jointly represent target identity and measured cellular context. Its Chromatin-Guided Response Router (CGRR) builds a source bank of control-derived expression offsets and retrieves relevant sources using perturbation/locus or control-ATAC similarity. These offsets account for baseline differences, while conditional transport flow learns the remaining response. Across three unseen-target and held-out-state settings on K562 CAT-ATAC and Perturb-Multiome, ChromaPert achieves the highest all-gene response correlation among evaluated methods. When transferring known perturbations to held-out states, it improves correlation by 23.2% across all genes and 46.2% for the twenty most responsive genes over the strongest respective baselines. Correct RNA--ATAC pairing improves recovery of chromatin-associated response slopes over shuffled pairing, while cross-state predictions retain state-specific responses to the same perturbation.

Large language models, particularly GPT-3, are able to produce high quality summaries of general domain news articles in few- and zero-shot settings. However, it is unclear if such models are similarly capable in more specialized, high-stakes domains such as biomedicine. In this paper, we enlist domain experts (individuals with medical training) to evaluate summaries of biomedical articles generated by GPT-3, given zero supervision. We consider both single- and multi-document settings. In the former, GPT-3 is tasked with generating regular and plain-language summaries of articles describing randomized controlled trials; in the latter, we assess the degree to which GPT-3 is able to synthesize evidence reported across a collection of articles. We design an annotation scheme for evaluating model outputs, with an emphasis on assessing the factual accuracy of generated summaries. We find that while GPT-3 is able to summarize and simplify single biomedical articles faithfully, it struggles to provide accurate aggregations of findings over multiple documents. We release all data and annotations used in this work.

Biological reasoning models use post-training to connect LLMs to biological foundation model representations and biological text. Their benchmark accuracy is taken as evidence that LLMs reason over these inputs. We test this assumption in six biological reasoning models across DNA, protein, and single-cell tasks. We perturb one biological input while holding the query and other inputs fixed, construct evidence conflicts that pair the foundation model representation of one genome, protein, or cell with the text of another, fit linear probes to the representations the language model receives, and analyze reasoning traces against the biological inputs. Evo2 and ESM3 contribute little to BioReason and BioReason-Pro performance on the evaluated tasks. Shuffling the DNA sequence barely changes BioReason disease prediction accuracy, and in evidence conflicts the two models follow the text in 97.9% and 99.7% of cases. Linear probes trained on the Evo2 and ESM3 representations predict the task targets, so these foundation models encode information relevant to the task, but provide limited overall performance improvement to BioReason and BioReason-Pro. In contrast, foundation model inputs contribute to ChatNT, Prot2Text-V2, and CellWhisperer performance, and differentially expressed genes in the gene sentence contribute to Cell2Sentence-Scale performance. Across SFT and RL checkpoints of BioReason-Pro and 42 BioReason checkpoints, increases in accuracy do not imply greater performance contributions from biological inputs. BioReason traces misstate nucleotide changes, while BioReason-Pro traces describe functions omitted from final predictions under evidence conflicts. We find that current post-training strategies do not ensure that foundation model representations contribute to task performance.

Advancements in DNA sequencing technologies have significantly improved our ability to decode genomic sequences. However, the prediction and interpretation of these sequences remain challenging due to the intricate nature of genetic material. Large language models (LLMs) have introduced new opportunities for biological sequence analysis. Recent developments in genomic language models have underscored the potential of LLMs in deciphering DNA sequences. Nonetheless, existing models often face limitations in robustness and application scope, primarily due to constraints in model structure and training data scale. To address these limitations, we present GENERator, a generative genomic foundation model featuring a context length of 98k base pairs (bp) and 1.2B parameters. Trained on an expansive dataset comprising 386B bp of eukaryotic DNA, the GENERator demonstrates state-of-the-art performance across both established and newly proposed benchmarks. The model adheres to the central dogma of molecular biology, accurately generating protein-coding sequences that translate into proteins structurally analogous to known families. It also shows significant promise in sequence optimization, particularly through the prompt-responsive generation of promoter sequences with specific activity profiles. These capabilities position the GENERator as a pivotal tool for genomic research and biotechnological advancement, enhancing our ability to interpret and predict complex biological systems and enabling precise genomic interventions.

Recent advancements in large language models have opened new possibilities for generative molecular drug design. We present Chemlactica and Chemma, two language models fine-tuned on a novel corpus of 110M molecules with computed properties, totaling 40B tokens. These models demonstrate strong performance in generating molecules with specified properties and predicting new molecular characteristics from limited samples. We introduce a novel optimization algorithm that leverages our language models to optimize molecules for arbitrary properties given limited access to a black box oracle. Our approach combines ideas from genetic algorithms, rejection sampling, and prompt optimization. It achieves state-of-the-art performance on multiple molecular optimization benchmarks, including an 8% improvement on Practical Molecular Optimization compared to previous methods. We publicly release the training corpus, the language models and the optimization algorithm.

The de novo design of ligand-binding proteins with tailored functions is essential for advancing biotechnology and molecular medicine, yet existing AI approaches are limited by scarce protein-ligand complex data. To circumvent this data bottleneck, we leverage the abundant natural language descriptions characterizing protein-ligand interactions. Here, we introduce InstructPro, a family of generative models that design proteins following the guidance of natural language instructions and ligand formulas. InstructPro produces protein sequences consistent with specified function descriptions and ligand targets. To enable training and evaluation, we develop InstructProBench, a large-scale dataset of 9.6 million (function description, ligand, protein) triples. We train two model variants -- InstructPro-1B and InstructPro-3B -- that substantially outperform strong baselines. InstructPro-1B achieves an AlphaFold3 ipTM of 0.918 and a binding affinity of -8.764 on seen ligands, while maintaining robust performance in a zero-shot setting with scores of 0.869 and -6.713, respectively. These results are accompanied by novelty scores of 70.1% and 68.8%, underscoring the model's ability to generalize beyond the training set. Furthermore, the model yields a superior binding free energy of -20.9 kcal/mol and an average of 5.82 intermolecular hydrogen bonds, validating its proficiency in designing high-affinity ligand-binding proteins. Notably, scaling to InstructPro-3B further improves the zero-shot ipTM to 0.882, binding affinity to -6.797, and binding free energy to -25.8 kcal/mol, demonstrating clear performance gains associated with increased model capacity. These findings highlight the power of natural language-guided generative models to mitigate the data bottlenecks in traditional structure-based methods, significantly broadening the scope of de novo protein design.

Chemical similarity searches are widely used in-silico methods for identifying new drug-like molecules. These methods have historically relied on structure-based comparisons to compute molecular similarity. Here, we use a chemical language model to create a vector-based chemical search. We extend implementations by creating a prompt engineering strategy that utilizes two different chemical string representation algorithms: one for the query and the other for the database. We explore this method by reviewing the search results from five drug-like query molecules (penicillin G, nirmatrelvir, zidovudine, lysergic acid diethylamide, and fentanyl) and three dye-like query molecules (acid blue 25, avobenzone, and 2-diphenylaminocarbazole). We find that this novel method identifies molecules that are functionally similar to the query, indicated by the associated patent literature, and that many of these molecules are structurally distinct from the query, making them unlikely to be found with traditional chemical similarity search methods. This method may aid in the discovery of novel structural classes of molecules that achieve target functionality.

In the realm of machine learning, traditional model development and automated approaches like AutoML typically rely on layers of abstraction, such as tree-based or Cartesian genetic programming. Our study introduces "Guided Evolution" (GE), a novel framework that diverges from these methods by utilizing Large Language Models (LLMs) to directly modify code. GE leverages LLMs for a more intelligent, supervised evolutionary process, guiding mutations and crossovers. Our unique "Evolution of Thought" (EoT) technique further enhances GE by enabling LLMs to reflect on and learn from the outcomes of previous mutations. This results in a self-sustaining feedback loop that augments decision-making in model evolution. GE maintains genetic diversity, crucial for evolutionary algorithms, by leveraging LLMs' capability to generate diverse responses from expertly crafted prompts and modulate model temperature. This not only accelerates the evolution process but also injects expert like creativity and insight into the process. Our application of GE in evolving the ExquisiteNetV2 model demonstrates its efficacy: the LLM-driven GE autonomously produced variants with improved accuracy, increasing from 92.52% to 93.34%, without compromising model compactness. This underscores the potential of LLMs to accelerate the traditional model design pipeline, enabling models to autonomously evolve and enhance their own designs.

A central challenge in de novo protein design is generating proteins with desired structural and functional properties. Existing design models typically require a dedicated input representation for each property, limiting the design objectives they support. We develop Prompteina, the first all-atom structure generation model that supports new and broader design objectives specified in natural language, analogous to text-to-image generation. To train Prompteina, we construct Prompteina-Data, a paired text--protein structure dataset of 1.8M structures and 50M+ captions describing global and residue-specific structural and functional properties. We adapt Proteina-Complexa, a pretrained structure generation model, through text-conditioned pretraining and finetuning that aligns residues with their corresponding text. Prompteina outperforms baselines on 15 of 18 structural properties and generates proteins that more closely match descriptions of their intended functions. In binder design, it leads baselines on at least 13 of 20 targets and improves interface confidence by 14% over the strongest baseline. With iterative in silico feedback, Prompteina's gain over non-iterative generation is 57% larger than the next-best baseline on the hardest targets. Finally, we experimentally validate Prompteina designs against GM2A, a target with no reported de novo binders. We identify nine binders, with the strongest at an apparent K_{D} of 107 nM. These results establish natural language as an effective and powerful conditioning interface for protein structure generation.

Diffusion models are among the most effective methods for image generation. This is in particular because, unlike GANs, they can be easily conditioned during training to produce elements with desired class or properties. However, guiding a pre-trained diffusion model to generate elements from previously unlabeled data is significantly more challenging. One of the possible solutions was given by the ADM-G guiding approach. Although ADM-G successfully generates elements from the given class, there is a significant quality gap compared to a model originally conditioned on this class. In particular, the FID score obtained by the ADM-G-guided diffusion model is nearly three times lower than the class-conditioned guidance. We demonstrate that this issue is partly due to ADM-G providing minimal guidance during the final stage of the denoising process. To address this problem, we propose GeoGuide, a guidance model based on tracing the distance of the diffusion model's trajectory from the data manifold. The main idea of GeoGuide is to produce normalized adjustments during the backward denoising process. As shown in the experiments, GeoGuide surpasses the probabilistic approach ADM-G with respect to both the FID scores and the quality of the generated images.

Space biology research aims to understand fundamental effects of spaceflight on organisms, develop foundational knowledge to support deep space exploration, and ultimately bioengineer spacecraft and habitats to stabilize the ecosystem of plants, crops, microbes, animals, and humans for sustained multi-planetary life. To advance these aims, the field leverages experiments, platforms, data, and model organisms from both spaceborne and ground-analog studies. As research is extended beyond low Earth orbit, experiments and platforms must be maximally autonomous, light, agile, and intelligent to expedite knowledge discovery. Here we present a summary of recommendations from a workshop organized by the National Aeronautics and Space Administration on artificial intelligence, machine learning, and modeling applications which offer key solutions toward these space biology challenges. In the next decade, the synthesis of artificial intelligence into the field of space biology will deepen the biological understanding of spaceflight effects, facilitate predictive modeling and analytics, support maximally autonomous and reproducible experiments, and efficiently manage spaceborne data and metadata, all with the goal to enable life to thrive in deep space.

Text-guided molecular generation with LLMs often yields invalid SMILES. We argue that invalid drafts should be addressed through a shift from validity-oriented repair to identity-preserving molecular recovery: the objective is not only to restore chemical validity, but also to preserve target-relevant structural cues and recover the molecular identity implied by the description. This perspective reveals the limitations of existing correction strategies. Post-hoc repair can recover validity while distorting key structures, LLM-only correction can introduce unintended global drift, and generic agentic correction remains constrained by greedy single-candidate trajectories even when equipped with executable RDKit edit tools. To address these limitations, we propose AMREC, which couples molecule-aware mismatch tracking with expanded candidate exploration and trajectory-level selection. On invalid ChEBI-20 drafts from three backbone models, AMREC achieves the strongest overall recovery profile across structural, exact-match, and string-level metrics.

Systematic literature review is essential for evidence-based medicine, requiring comprehensive analysis of clinical trial publications. However, the application of artificial intelligence (AI) models for medical literature mining has been limited by insufficient training and evaluation across broad therapeutic areas and diverse tasks. Here, we present LEADS, an AI foundation model for study search, screening, and data extraction from medical literature. The model is trained on 633,759 instruction data points in LEADSInstruct, curated from 21,335 systematic reviews, 453,625 clinical trial publications, and 27,015 clinical trial registries. We showed that LEADS demonstrates consistent improvements over four cutting-edge generic large language models (LLMs) on six tasks. Furthermore, LEADS enhances expert workflows by providing supportive references following expert requests, streamlining processes while maintaining high-quality results. A study with 16 clinicians and medical researchers from 14 different institutions revealed that experts collaborating with LEADS achieved a recall of 0.81 compared to 0.77 experts working alone in study selection, with a time savings of 22.6%. In data extraction tasks, experts using LEADS achieved an accuracy of 0.85 versus 0.80 without using LEADS, alongside a 26.9% time savings. These findings highlight the potential of specialized medical literature foundation models to outperform generic models, delivering significant quality and efficiency benefits when integrated into expert workflows for medical literature mining.

Over the past decade, the revolution in single-cell sequencing has enabled the simultaneous molecular profiling of various modalities across thousands of individual cells, allowing scientists to investigate the diverse functions of complex tissues and uncover underlying disease mechanisms. Among all the analytical steps, assigning individual cells to specific types is fundamental for understanding cellular heterogeneity. However, this process is usually labor-intensive and requires extensive expert knowledge. Recent advances in large language models (LLMs) have demonstrated their ability to efficiently process and synthesize vast corpora of text to automatically extract essential biological knowledge, such as marker genes, potentially promoting more efficient and automated cell type annotations. To thoroughly evaluate the capability of modern instruction-tuned LLMs in automating the cell type identification process, we introduce SOAR, a comprehensive benchmarking study of LLMs for cell type annotation tasks in single-cell genomics. Specifically, we assess the performance of 8 instruction-tuned LLMs across 11 datasets, spanning multiple cell types and species. Our study explores the potential of LLMs to accurately classify and annotate cell types in single-cell RNA sequencing (scRNA-seq) data, while extending their application to multiomics data through cross-modality translation. Additionally, we evaluate the effectiveness of chain-of-thought (CoT) prompting techniques in generating detailed biological insights during the annotation process. The results demonstrate that LLMs can provide robust interpretations of single-cell data without requiring additional fine-tuning, advancing the automation of cell type annotation in genomics research.

Molecular optimization seeks to improve a molecule through small structural edits while preserving similarity to the starting compound. Recent language-model approaches typically treat this task as prompt-conditioned sequence generation. However, relying on natural language introduces an inherent data-scaling bottleneck, often leads to chemical hallucinations, and ignores the strong context dependence of fragment effects. We present FORGE, a two-stage framework that reformulates molecular optimization as context-aware local editing. By utilizing automatically mined, verified low-to-high edit pairs instead of expensive human text annotations, Stage 1 ranks candidate fragments by their property contribution under the full molecular context to inject chemical prior, and Stage 2 generates explicit fragment replacements. Built on a compact 0.6B language model, FORGE further adapts to unseen black-box objectives through in-context demonstrations. Across Prompt-MolOpt, PMO-1k and ChemCoTBench, FORGE consistently outperforms prior methods, including substantially larger language models and graph methods. These results highlight the value of explicit fragment-level supervision as a more easily obtainable, scalable, and hallucination-less alternative to natural language training.

Diffusion models have shown promising generative capabilities across diverse domains, yet aligning their outputs with desired reward functions remains a challenge, particularly in cases where reward functions are non-differentiable. Some gradient-free guidance methods have been developed, but they often struggle to achieve optimal inference-time alignment. In this work, we newly frame inference-time alignment in diffusion as a search problem and propose Dynamic Search for Diffusion (DSearch), which subsamples from denoising processes and approximates intermediate node rewards. It also dynamically adjusts beam width and tree expansion to efficiently explore high-reward generations. To refine intermediate decisions, DSearch incorporates adaptive scheduling based on noise levels and a lookahead heuristic function. We validate DSearch across multiple domains, including biological sequence design, molecular optimization, and image generation, demonstrating superior reward optimization compared to existing approaches.

Classifier guidance is a recently introduced method to trade off mode coverage and sample fidelity in conditional diffusion models post training, in the same spirit as low temperature sampling or truncation in other types of generative models. Classifier guidance combines the score estimate of a diffusion model with the gradient of an image classifier and thereby requires training an image classifier separate from the diffusion model. It also raises the question of whether guidance can be performed without a classifier. We show that guidance can be indeed performed by a pure generative model without such a classifier: in what we call classifier-free guidance, we jointly train a conditional and an unconditional diffusion model, and we combine the resulting conditional and unconditional score estimates to attain a trade-off between sample quality and diversity similar to that obtained using classifier guidance.

Understanding the underlying linguistic rules of plant genomes remains a fundamental challenge in computational biology. Recent advances including AgroNT and PDLLMs have made notable progress although, they suffer from excessive parameter size and limited ability to model the bidirectional nature of DNA strands respectively. To address these limitations, we propose PlantBiMoE, a lightweight and expressive plant genome language model that integrates bidirectional Mamba and a Sparse Mixture-of-Experts (SparseMoE) framework. The bidirectional Mamba enables the model to effectively capture structural dependencies across both the forward and reverse DNA strands, while SparseMoE significantly reduces the number of active parameters, improving computational efficiency without sacrificing modeling capacity. We evaluated and tested our model on the Modified Plants Genome Benchmark (MPGB), an enhanced genomic benchmark, which consolidates 31 datasets across 11 representative tasks, with input sequence lengths ranging from 50 to 6,000 bp. Experimental results demonstrate that PlantBiMoE achieves the best performance on 20 out of 31 datasets and the average best when comparing with existing models. In summary, all above results demonstrate that our model can effectively represent plant genomic sequences, serving as a robust computational tool for diverse genomic tasks, while making substantive contributions to plant genomics, gene editing, and synthetic biology. The code is available at: https://github.com/HUST-Keep-Lin/PlantBiMoE

Controllable image synthesis models allow creation of diverse images based on text instructions or guidance from a reference image. Recently, denoising diffusion probabilistic models have been shown to generate more realistic imagery than prior methods, and have been successfully demonstrated in unconditional and class-conditional settings. We investigate fine-grained, continuous control of this model class, and introduce a novel unified framework for semantic diffusion guidance, which allows either language or image guidance, or both. Guidance is injected into a pretrained unconditional diffusion model using the gradient of image-text or image matching scores, without re-training the diffusion model. We explore CLIP-based language guidance as well as both content and style-based image guidance in a unified framework. Our text-guided synthesis approach can be applied to datasets without associated text annotations. We conduct experiments on FFHQ and LSUN datasets, and show results on fine-grained text-guided image synthesis, synthesis of images related to a style or content reference image, and examples with both textual and image guidance.