Daily Papers

Agents driven by large language models are increasingly deployed on long-horizon tasks, where they use tools and modify real workspaces. How well they perform depends as much on the harness around the model as on the model itself. Existing benchmarks measure downstream task success under a fixed harness, leaving harness engineering itself unexplored. We propose Doc2Harness, a two-stage benchmark that evaluates long-horizon harness engineering directly. In Stage 1, a build model operating inside a fixed builder harness receives an interface-only contract skeleton and a development document that consolidates behavior across twelve frontier harnesses, and then constructs a complete candidate harness in an isolated container. In Stage 2, the frozen candidate harness runs in containers separate from the construction environment, one per test case, and is driven end to end by a scripted mock model. We score each test case using four observable channels, namely the requests sent to the model, the files on disk, the process exit code, and the command output; positive controls rule out vacuous passes. Across nineteen frontier models, each evaluated with three independent builds on 328 test cases, GPT-6 Astra achieves the highest pass rate at 53.05%, while the weakest model reaches 27.44%, a gap of roughly twenty-six percentage points. Even the strongest model fails nearly half of the test cases, and failures cluster around how cross-cutting functionality is split across modules. To our knowledge, Doc2Harness provides the first deterministic benchmark for measuring long-horizon harness engineering.

Parametric human body models are foundational to human reconstruction, animation, and simulation, yet they remain mutually incompatible: SMPL, SMPL-X, MHR, Anny, and related models each diverge in mesh topology, skeletal structure, shape parameterization, and unit convention, making it impractical to exploit their complementary strengths within a single pipeline. We present SOMA, a unified body layer that bridges these heterogeneous representations through three abstraction layers. Mesh topology abstraction maps any source model's identity to a shared canonical mesh in constant time per vertex. Skeletal abstraction recovers a full set of identity-adapted joint transforms from any body shape, whether in rest pose or an arbitrary posed configuration, in a single closed-form pass, with no iterative optimization or per-model training. Pose abstraction inverts the skinning pipeline to recover unified skeleton rotations directly from posed vertices of any supported model, enabling heterogeneous motion datasets to be consumed without custom retargeting. Together, these layers reduce the O(M^2) per-pair adapter problem to O(M) single-backend connectors, letting practitioners freely mix identity sources and pose data at inference time. The entire pipeline is fully differentiable end-to-end and GPU-accelerated via NVIDIA-Warp.

Skeleton generation is essential for animating 3D assets, but current deep learning methods remain limited: they cannot handle the growing structural complexity of modern models and offer minimal controllability, creating a major bottleneck for real-world animation workflows. To address this, we propose an animator-centric SG framework that achieves high-quality skeleton prediction on complex inputs while providing intuitive control handles. Our contributions are threefold. First, we curate a large-scale dataset of 82,633 rigged meshes with diverse and complicated structures. Second, we introduce a novel semantic-aware tokenization scheme for auto-regressive modeling. This scheme effectively complements purely geometric prior methods by subdividing bones into semantically meaningful groups, thereby enhancing robustness to structural complexity and enabling a key control mechanism. Third, we design a learnable density interval module that allows animators to exert soft, direct control over bone density. Extensive experiments demonstrate that our framework not only generates high-quality skeletons for challenging inputs but also successfully fulfills two critical requirements from professional animators.

This work studies the challenge of transfer animations between characters whose skeletal topologies differ substantially. While many techniques have advanced retargeting techniques in decades, transfer motions across diverse topologies remains less-explored. The primary obstacle lies in the inherent topological inconsistency between source and target skeletons, which restricts the establishment of straightforward one-to-one bone correspondences. Besides, the current lack of large-scale paired motion datasets spanning different topological structures severely constrains the development of data-driven approaches. To address these limitations, we introduce Motion2Motion, a novel, training-free framework. Simply yet effectively, Motion2Motion works with only one or a few example motions on the target skeleton, by accessing a sparse set of bone correspondences between the source and target skeletons. Through comprehensive qualitative and quantitative evaluations, we demonstrate that Motion2Motion achieves efficient and reliable performance in both similar-skeleton and cross-species skeleton transfer scenarios. The practical utility of our approach is further evidenced by its successful integration in downstream applications and user interfaces, highlighting its potential for industrial applications. Code and data are available at https://lhchen.top/Motion2Motion.

Animating a newly designed character using motion capture (mocap) data is a long standing problem in computer animation. A key consideration is the skeletal structure that should correspond to the available mocap data, and the shape deformation in the joint regions, which often requires a tailored, pose-specific refinement. In this work, we develop a neural technique for articulating 3D characters using enveloping with a pre-defined skeletal structure which produces high quality pose dependent deformations. Our framework learns to rig and skin characters with the same articulation structure (e.g., bipeds or quadrupeds), and builds the desired skeleton hierarchy into the network architecture. Furthermore, we propose neural blend shapes--a set of corrective pose-dependent shapes which improve the deformation quality in the joint regions in order to address the notorious artifacts resulting from standard rigging and skinning. Our system estimates neural blend shapes for input meshes with arbitrary connectivity, as well as weighting coefficients which are conditioned on the input joint rotations. Unlike recent deep learning techniques which supervise the network with ground-truth rigging and skinning parameters, our approach does not assume that the training data has a specific underlying deformation model. Instead, during training, the network observes deformed shapes and learns to infer the corresponding rig, skin and blend shapes using indirect supervision. During inference, we demonstrate that our network generalizes to unseen characters with arbitrary mesh connectivity, including unrigged characters built by 3D artists. Conforming to standard skeletal animation models enables direct plug-and-play in standard animation software, as well as game engines.

Recent advances in automatic rigging now deliver animation-ready 3D assets at scale, yet generating the motion to drive them remains a bottleneck. Existing learned animators are topology-constrained: they rely on category-specific templates or require per-skeleton fine-tuning and reference motions at inference. We present UniMate, a unified foundation model that synthesizes articulated motion for arbitrary skeletons from a rigged 3D asset and a text prompt, with no test-time optimization or per-skeleton retraining. UniMate introduces a topology-aware diffusion transformer, which integrates skeletal topology into attention via three mechanisms: (1) a graph-aware attention bias from pairwise joint relations and geodesic distances; (2) a spectral rotary position embedding generalizing RoPE to arbitrary kinematic trees via the graph Laplacian; and (3) a global topological conditioner attention-pooled from the rest-pose skeleton. We also curate UniML3D, 13,006 motion sequences spanning bipedal, quadrupedal, avian, marine, insectoid, serpentine, and articulated rigid objects with unified canonicalization and text pairing. Trained on this dataset, UniMate outperforms state-of-the-art baselines in quality, generalization, and efficiency, and supports zero-shot cross-topology transfer, in-betweening, expansion, and text-guided editing. Our project page is available at https://linzhanmou.com/unimate/.

Current skeleton representation learning paradigms face distinct limitations: Contrastive Learning (CL) often overlooks fine-grained motion details, while Masked Auto-Encoders (MAE) rely on coordinate-level reconstruction. This reconstruction inherently demands dense token sequences and heavy decoders, wasting pre-training computation on discarded components and forcing downstream inference to process dense token grids. To resolve these bottlenecks, we propose SLiM (Skeleton Less is More), a compact-token framework that unifies masked feature prediction and contrastive learning via a shared encoder. By shifting the objective from raw coordinate reconstruction to decoder-free, teacher-guided feature prediction, SLiM breaks the reliance on dense tokenization and enables effective learning with a highly compact token grid. Crucially, to prevent trivial shortcut learning arising from strong inter-joint dependencies of human, we introduce Semantic Tube Masking together with Skeleton-Aware Augmentations to enforce deep skeletal-temporal reasoning and anatomical consistency. Extensive experiments across multiple downstream protocols demonstrate that SLiM achieves state-of-the-art performance while structurally reducing inference computation by 7.89times compared to dense-token MAE baselines.

Recent 3D generative models can synthesize high-quality assets, but their outputs are typically static: they lack the skeletal rigs, joint hierarchies, and skinning weights required for animation. This limits their use in games, film, simulation, virtual agents, and embodied AI, where assets must not only look plausible but also move plausibly. We introduce Rigel3D, a generative method for animation-ready 3D assets represented as rigged meshes. Unlike post-hoc auto-rigging methods that attach rigs to completed shapes, our method jointly models geometry and rig structure through coupled surface and skeleton structured latent representations. A rig-aware autoencoder decodes these representations into mesh geometry, skeleton topology, joint coordinates, and skinning weights, while a two-stage latent generative model synthesizes both surface and skeleton representations for image-conditioned generation. To support downstream animation workflows, we further introduce an open-vocabulary joint labeling module that embeds generated joints into a shared vision-language space, enabling correspondence to arbitrary retargeting templates. Experiments on large-scale rigged asset datasets demonstrate that our method generates diverse, high-quality animation-ready assets and outperforms existing rigging baselines across multiple metrics.

Recent advances in skeleton-based action recognition increasingly leverage semantic priors from Large Language Models (LLMs) to enrich skeletal representations. However, the LLM is typically queried in isolation from the recognition model and receives no performance feedback. As a result, it often fails to deliver the targeted discriminative cues critical to distinguish similar actions. To overcome these limitations, we propose SkeletonAgent, a novel framework that bridges the recognition model and the LLM through two cooperative agents, i.e., Questioner and Selector. Specifically, the Questioner identifies the most frequently confused classes and supplies them to the LLM as context for more targeted guidance. Conversely, the Selector parses the LLM's response to extract precise joint-level constraints and feeds them back to the recognizer, enabling finer-grained cross-modal alignment. Comprehensive evaluations on five benchmarks, including NTU RGB+D, NTU RGB+D 120, Kinetics-Skeleton, FineGYM, and UAV-Human, demonstrate that SkeletonAgent consistently outperforms state-of-the-art benchmark methods. The code is available at https://github.com/firework8/SkeletonAgent.

Modern interactive applications increasingly demand dynamic 3D content, yet the transformation of static 3D models into animated assets constitutes a significant bottleneck in content creation pipelines. While recent advances in generative AI have revolutionized static 3D model creation, rigging and animation continue to depend heavily on expert intervention. We present Puppeteer, a comprehensive framework that addresses both automatic rigging and animation for diverse 3D objects. Our system first predicts plausible skeletal structures via an auto-regressive transformer that introduces a joint-based tokenization strategy for compact representation and a hierarchical ordering methodology with stochastic perturbation that enhances bidirectional learning capabilities. It then infers skinning weights via an attention-based architecture incorporating topology-aware joint attention that explicitly encodes inter-joint relationships based on skeletal graph distances. Finally, we complement these rigging advances with a differentiable optimization-based animation pipeline that generates stable, high-fidelity animations while being computationally more efficient than existing approaches. Extensive evaluations across multiple benchmarks demonstrate that our method significantly outperforms state-of-the-art techniques in both skeletal prediction accuracy and skinning quality. The system robustly processes diverse 3D content, ranging from professionally designed game assets to AI-generated shapes, producing temporally coherent animations that eliminate the jittering issues common in existing methods.

Animatable 3D assets, defined as geometry equipped with an articulated skeleton and skinning weights, are fundamental to interactive graphics, embodied agents, and animation production. While recent 3D generative models can synthesize visually plausible shapes from images, the results are typically static. Obtaining usable rigs via post-hoc auto-rigging is brittle and often produces skeletons that are topologically inconsistent with the generated geometry. We present AniGen, a unified framework that directly generates animate-ready 3D assets conditioned on a single image. Our key insight is to represent shape, skeleton, and skinning as mutually consistent S^3 Fields (Shape, Skeleton, Skin) defined over a shared spatial domain. To enable the robust learning of these fields, we introduce two technical innovations: (i) a confidence-decaying skeleton field that explicitly handles the geometric ambiguity of bone prediction at Voronoi boundaries, and (ii) a dual skin feature field that decouples skinning weights from specific joint counts, allowing a fixed-architecture network to predict rigs of arbitrary complexity. Built upon a two-stage flow-matching pipeline, AniGen first synthesizes a sparse structural scaffold and then generates dense geometry and articulation in a structured latent space. Extensive experiments demonstrate that AniGen substantially outperforms state-of-the-art sequential baselines in rig validity and animation quality, generalizing effectively to in-the-wild images across diverse categories including animals, humanoids, and machinery. Homepage: https://yihua7.github.io/AniGen-web/

Modern cutting-edge AI applications are being developed over fast-evolving, heterogeneous, nascent hardware devices. This requires frequent reworking of the AI software stack to adopt bottom-up changes from new hardware, which takes time for general-purpose software libraries. Consequently, real applications often develop custom software stacks optimized for their specific workloads and hardware. Custom stacks help in quick development and optimization, but incur a lot of redundant efforts across applications in writing non-portable code. This paper discusses an alternative communication library interface for AI applications that offers both portability and performance by reducing redundant efforts while maintaining flexibility for customization. We present MSCCL++, a novel abstraction of GPU communication based on separation of concerns: (1) a primitive interface provides a minimal hardware abstraction as a common ground for software and hardware developers to write custom communication, and (2) higher-level portable interfaces and specialized implementations enable optimization for different workloads and hardware environments. This approach makes the primitive interface reusable across applications while enabling highly flexible optimization. Compared to state-of-the-art baselines (NCCL, RCCL, and MSCCL), MSCCL++ achieves speedups of up to 5.4times for collective communication and up to 15% for real-world AI inference workloads. MSCCL++ is in production of multiple AI services provided by Microsoft Azure, and is also adopted by RCCL, the GPU collective communication library maintained by AMD. MSCCL++ is open-source and available at https://github.com/microsoft/mscclpp.

Native 3D generative models have achieved remarkable fidelity and speed, yet they suffer from a critical limitation: inability to prescribe precise structural articulations, where precise structural control within the native 3D space remains underexplored. This paper proposes SK-Adapter, a simple and yet highly efficient and effective framework that unlocks precise skeletal manipulation for native 3D generation. Moving beyond text or image prompts, which can be ambiguous for precise structure, we treat the 3D skeleton as a first-class control signal. SK-Adapter is a lightweight structural adapter network that encodes joint coordinates and topology into learnable tokens, which are injected into the frozen 3D generation backbone via cross-attention. This smart design allows the model to not only effectively "attend" to specific 3D structural constraints but also preserve its original generative priors. To bridge the data gap, we contribute Objaverse-TMS dataset, a large-scale dataset of 24k text-mesh-skeleton pairs. Extensive experiments confirm that our method achieves robust structural control while preserving the geometry and texture quality of the foundation model, significantly outperforming existing baselines. Furthermore, we extend this capability to local 3D editing, enabling the region specific editing of existing assets with skeletal guidance, which is unattainable by previous methods. Project Page: https://sk-adapter.github.io/

Parametric body models offer expressive 3D representation of humans across a wide range of poses, shapes, and facial expressions, typically derived by learning a basis over registered 3D meshes. However, existing human mesh modeling approaches struggle to capture detailed variations across diverse body poses and shapes, largely due to limited training data diversity and restrictive modeling assumptions. Moreover, the common paradigm first optimizes the external body surface using a linear basis, then regresses internal skeletal joints from surface vertices. This approach introduces problematic dependencies between internal skeleton and outer soft tissue, limiting direct control over body height and bone lengths. To address these issues, we present ATLAS, a high-fidelity body model learned from 600k high-resolution scans captured using 240 synchronized cameras. Unlike previous methods, we explicitly decouple the shape and skeleton bases by grounding our mesh representation in the human skeleton. This decoupling enables enhanced shape expressivity, fine-grained customization of body attributes, and keypoint fitting independent of external soft-tissue characteristics. ATLAS outperforms existing methods by fitting unseen subjects in diverse poses more accurately, and quantitative evaluations show that our non-linear pose correctives more effectively capture complex poses compared to linear models.

We present Muses, the first training-free method for fantastic 3D creature generation in a feed-forward paradigm. Previous methods, which rely on part-aware optimization, manual assembly, or 2D image generation, often produce unrealistic or incoherent 3D assets due to the challenges of intricate part-level manipulation and limited out-of-domain generation. In contrast, Muses leverages the 3D skeleton, a fundamental representation of biological forms, to explicitly and rationally compose diverse elements. This skeletal foundation formalizes 3D content creation as a structure-aware pipeline of design, composition, and generation. Muses begins by constructing a creatively composed 3D skeleton with coherent layout and scale through graph-constrained reasoning. This skeleton then guides a voxel-based assembly process within a structured latent space, integrating regions from different objects. Finally, image-guided appearance modeling under skeletal conditions is applied to generate a style-consistent and harmonious texture for the assembled shape. Extensive experiments establish Muses' state-of-the-art performance in terms of visual fidelity and alignment with textual descriptions, and potential on flexible 3D object editing. Project page: https://luhexiao.github.io/Muses.github.io/.

We introduce Point2Skeleton, an unsupervised method to learn skeletal representations from point clouds. Existing skeletonization methods are limited to tubular shapes and the stringent requirement of watertight input, while our method aims to produce more generalized skeletal representations for complex structures and handle point clouds. Our key idea is to use the insights of the medial axis transform (MAT) to capture the intrinsic geometric and topological natures of the original input points. We first predict a set of skeletal points by learning a geometric transformation, and then analyze the connectivity of the skeletal points to form skeletal mesh structures. Extensive evaluations and comparisons show our method has superior performance and robustness. The learned skeletal representation will benefit several unsupervised tasks for point clouds, such as surface reconstruction and segmentation.

Rigged 3D assets are fundamental to 3D deformation and animation. However, existing 3D generation methods face challenges in generating animatable geometry, while rigging techniques lack fine-grained structural control over skeleton creation. To address these limitations, we introduce Stroke3D, a novel framework that directly generates rigged meshes from user inputs: 2D drawn strokes and a descriptive text prompt. Our approach pioneers a two-stage pipeline that separates the generation into: 1) Controllable Skeleton Generation, we employ the Skeletal Graph VAE (Sk-VAE) to encode the skeleton's graph structure into a latent space, where the Skeletal Graph DiT (Sk-DiT) generates a skeletal embedding. The generation process is conditioned on both the text for semantics and the 2D strokes for explicit structural control, with the VAE's decoder reconstructing the final high-quality 3D skeleton; and 2) Enhanced Mesh Synthesis via TextuRig and SKA-DPO, where we then synthesize a textured mesh conditioned on the generated skeleton. For this stage, we first enhance an existing skeleton-to-mesh model by augmenting its training data with TextuRig: a dataset of textured and rigged meshes with captions, curated from Objaverse-XL. Additionally, we employ a preference optimization strategy, SKA-DPO, guided by a skeleton-mesh alignment score, to further improve geometric fidelity. Together, our framework enables a more intuitive workflow for creating ready to animate 3D content. To the best of our knowledge, our work is the first to generate rigged 3D meshes conditioned on user-drawn 2D strokes. Extensive experiments demonstrate that Stroke3D produces plausible skeletons and high-quality meshes.

We present AnimaX, a feed-forward 3D animation framework that bridges the motion priors of video diffusion models with the controllable structure of skeleton-based animation. Traditional motion synthesis methods are either restricted to fixed skeletal topologies or require costly optimization in high-dimensional deformation spaces. In contrast, AnimaX effectively transfers video-based motion knowledge to the 3D domain, supporting diverse articulated meshes with arbitrary skeletons. Our method represents 3D motion as multi-view, multi-frame 2D pose maps, and enables joint video-pose diffusion conditioned on template renderings and a textual motion prompt. We introduce shared positional encodings and modality-aware embeddings to ensure spatial-temporal alignment between video and pose sequences, effectively transferring video priors to motion generation task. The resulting multi-view pose sequences are triangulated into 3D joint positions and converted into mesh animation via inverse kinematics. Trained on a newly curated dataset of 160,000 rigged sequences, AnimaX achieves state-of-the-art results on VBench in generalization, motion fidelity, and efficiency, offering a scalable solution for category-agnostic 3D animation. Project page: https://anima-x.github.io/{https://anima-x.github.io/}.

In this paper, we highlight a critical yet often overlooked factor in most 3D human tasks, namely modeling humans with complex garments. It is known that the parameterized formulation of SMPL is able to fit human skin; while complex garments, e.g., hand-held objects and loose-fitting garments, are difficult to get modeled within the unified framework, since their movements are usually decoupled with the human body. To enhance the capability of SMPL skeleton in response to this situation, we propose a modular growth strategy that enables the joint tree of the skeleton to expand adaptively. Specifically, our method, called ToMiE, consists of parent joints localization and external joints optimization. For parent joints localization, we employ a gradient-based approach guided by both LBS blending weights and motion kernels. Once the external joints are obtained, we proceed to optimize their transformations in SE(3) across different frames, enabling rendering and explicit animation. ToMiE manages to outperform other methods across various cases with garments, not only in rendering quality but also by offering free animation of grown joints, thereby enhancing the expressive ability of SMPL skeleton for a broader range of applications.

Multimodal large language models (MLLMs) exhibit strong visual-language reasoning, yet cannot process structured, non-visual data such as human skeletons. Existing methods either compress skeleton dynamics into lossy feature vectors for text alignment, or quantize motion into discrete tokens that generalize poorly across heterogeneous skeleton formats. We present SkeletonLLM, which achieves universal skeleton understanding by translating arbitrary skeleton sequences into the MLLM's native visual modality. At its core is DrAction, a differentiable, format-agnostic renderer that converts skeletal kinematics into compact image sequences. Because the pipeline is end-to-end differentiable, MLLM gradients can directly guide the rendering to produce task-informative visual tokens. To further enhance reasoning capabilities, we introduce a cooperative training strategy: Causal Reasoning Distillation transfers structured, step-by-step reasoning from a teacher model, while Discriminative Finetuning sharpens decision boundaries between confusable actions. SkeletonLLM demonstrates strong generalization in open-vocabulary action recognition, while its learned reasoning capabilities naturally extend to motion captioning and question answering across heterogeneous skeleton formats -- suggesting a viable path for applying MLLMs to non-native modalities. Code: https://github.com/wangzy01/SkeletonLLM.

We present a real-time approach for multi-person 3D motion capture at over 30 fps using a single RGB camera. It operates successfully in generic scenes which may contain occlusions by objects and by other people. Our method operates in subsequent stages. The first stage is a convolutional neural network (CNN) that estimates 2D and 3D pose features along with identity assignments for all visible joints of all individuals.We contribute a new architecture for this CNN, called SelecSLS Net, that uses novel selective long and short range skip connections to improve the information flow allowing for a drastically faster network without compromising accuracy. In the second stage, a fully connected neural network turns the possibly partial (on account of occlusion) 2Dpose and 3Dpose features for each subject into a complete 3Dpose estimate per individual. The third stage applies space-time skeletal model fitting to the predicted 2D and 3D pose per subject to further reconcile the 2D and 3D pose, and enforce temporal coherence. Our method returns the full skeletal pose in joint angles for each subject. This is a further key distinction from previous work that do not produce joint angle results of a coherent skeleton in real time for multi-person scenes. The proposed system runs on consumer hardware at a previously unseen speed of more than 30 fps given 512x320 images as input while achieving state-of-the-art accuracy, which we will demonstrate on a range of challenging real-world scenes.

We present RigAnything, a novel autoregressive transformer-based model, which makes 3D assets rig-ready by probabilistically generating joints, skeleton topologies, and assigning skinning weights in a template-free manner. Unlike most existing auto-rigging methods, which rely on predefined skeleton template and are limited to specific categories like humanoid, RigAnything approaches the rigging problem in an autoregressive manner, iteratively predicting the next joint based on the global input shape and the previous prediction. While autoregressive models are typically used to generate sequential data, RigAnything extends their application to effectively learn and represent skeletons, which are inherently tree structures. To achieve this, we organize the joints in a breadth-first search (BFS) order, enabling the skeleton to be defined as a sequence of 3D locations and the parent index. Furthermore, our model improves the accuracy of position prediction by leveraging diffusion modeling, ensuring precise and consistent placement of joints within the hierarchy. This formulation allows the autoregressive model to efficiently capture both spatial and hierarchical relationships within the skeleton. Trained end-to-end on both RigNet and Objaverse datasets, RigAnything demonstrates state-of-the-art performance across diverse object types, including humanoids, quadrupeds, marine creatures, insects, and many more, surpassing prior methods in quality, robustness, generalizability, and efficiency. Please check our website for more details: https://www.liuisabella.com/RigAnything.

Animation of 2D hand-drawn sketches provides an effective medium for visual communication. However, these sketches pose challenges, particularly in handling occlusions and accurately mapping motion. While 3D animation naturally addresses these challenges, estimating 3D motion remains a very complex task. Recent approaches to converting 2D sketches to 3D animations have mainly focused on specific types of motion, such as bipedal movements and facial expressions. We propose Sketch2Motion, a diffusion-guided framework for skeleton-based motion synthesis that combines classical character animation pipelines with deep generative priors. Our method represents motion using skeletal transformations, which are propagated to mesh deformations via linear blend skinning. To guide the resulting animation toward realistic and semantically meaningful motion, we integrate a text-to-video diffusion model via motion-aware score-distillation sampling (MoSDS), enabling optimization without paired motion data. Additionally, we apply physics-inspired smoothness, topological, and contact constraints to stabilize optimization and preserve motion plausibility. Further, we integrate a spring-mass simulator to introduce secondary motion effects. The proposed framework is generalized, fully differentiable, modular, and compatible with biped, quadruped, and non-living articulated characters. Experiments demonstrate that our approach produces temporally coherent, text-aligned animations that outperform baseline motion transfer methods that lack generative priors or explicit physical constraints. We will make our code and dataset publicly available.

Skeleton sequence representation learning has shown great advantages for action recognition due to its promising ability to model human joints and topology. However, the current methods usually require sufficient labeled data for training computationally expensive models, which is labor-intensive and time-consuming. Moreover, these methods ignore how to utilize the fine-grained dependencies among different skeleton joints to pre-train an efficient skeleton sequence learning model that can generalize well across different datasets. In this paper, we propose an efficient skeleton sequence learning framework, named Skeleton Sequence Learning (SSL). To comprehensively capture the human pose and obtain discriminative skeleton sequence representation, we build an asymmetric graph-based encoder-decoder pre-training architecture named SkeletonMAE, which embeds skeleton joint sequence into Graph Convolutional Network (GCN) and reconstructs the masked skeleton joints and edges based on the prior human topology knowledge. Then, the pre-trained SkeletonMAE encoder is integrated with the Spatial-Temporal Representation Learning (STRL) module to build the SSL framework. Extensive experimental results show that our SSL generalizes well across different datasets and outperforms the state-of-the-art self-supervised skeleton-based action recognition methods on FineGym, Diving48, NTU 60 and NTU 120 datasets. Additionally, we obtain comparable performance to some fully supervised methods. The code is avaliable at https://github.com/HongYan1123/SkeletonMAE.

We introduce MotioNet, a deep neural network that directly reconstructs the motion of a 3D human skeleton from monocular video.While previous methods rely on either rigging or inverse kinematics (IK) to associate a consistent skeleton with temporally coherent joint rotations, our method is the first data-driven approach that directly outputs a kinematic skeleton, which is a complete, commonly used, motion representation. At the crux of our approach lies a deep neural network with embedded kinematic priors, which decomposes sequences of 2D joint positions into two separate attributes: a single, symmetric, skeleton, encoded by bone lengths, and a sequence of 3D joint rotations associated with global root positions and foot contact labels. These attributes are fed into an integrated forward kinematics (FK) layer that outputs 3D positions, which are compared to a ground truth. In addition, an adversarial loss is applied to the velocities of the recovered rotations, to ensure that they lie on the manifold of natural joint rotations. The key advantage of our approach is that it learns to infer natural joint rotations directly from the training data, rather than assuming an underlying model, or inferring them from joint positions using a data-agnostic IK solver. We show that enforcing a single consistent skeleton along with temporally coherent joint rotations constrains the solution space, leading to a more robust handling of self-occlusions and depth ambiguities.

3D Reconstruction of moving articulated objects without additional information about object structure is a challenging problem. Current methods overcome such challenges by employing category-specific skeletal models. Consequently, they do not generalize well to articulated objects in the wild. We treat an articulated object as an unknown, semi-rigid skeletal structure surrounded by nonrigid material (e.g., skin). Our method simultaneously estimates the visible (explicit) representation (3D shapes, colors, camera parameters) and the implicit skeletal representation, from motion cues in the object video without 3D supervision. Our implicit representation consists of four parts. (1) Skeleton, which specifies how semi-rigid parts are connected. (2) black{Skinning Weights}, which associates each surface vertex with semi-rigid parts with probability. (3) Rigidity Coefficients, specifying the articulation of the local surface. (4) Time-Varying Transformations, which specify the skeletal motion and surface deformation parameters. We introduce an algorithm that uses physical constraints as regularization terms and iteratively estimates both implicit and explicit representations. Our method is category-agnostic, thus eliminating the need for category-specific skeletons, we show that our method outperforms state-of-the-art across standard video datasets.

Great progress has been made in estimating 3D human pose and shape from images and video by training neural networks to directly regress the parameters of parametric human models like SMPL. However, existing body models have simplified kinematic structures that do not correspond to the true joint locations and articulations in the human skeletal system, limiting their potential use in biomechanics. On the other hand, methods for estimating biomechanically accurate skeletal motion typically rely on complex motion capture systems and expensive optimization methods. What is needed is a parametric 3D human model with a biomechanically accurate skeletal structure that can be easily posed. To that end, we develop SKEL, which re-rigs the SMPL body model with a biomechanics skeleton. To enable this, we need training data of skeletons inside SMPL meshes in diverse poses. We build such a dataset by optimizing biomechanically accurate skeletons inside SMPL meshes from AMASS sequences. We then learn a regressor from SMPL mesh vertices to the optimized joint locations and bone rotations. Finally, we re-parametrize the SMPL mesh with the new kinematic parameters. The resulting SKEL model is animatable like SMPL but with fewer, and biomechanically-realistic, degrees of freedom. We show that SKEL has more biomechanically accurate joint locations than SMPL, and the bones fit inside the body surface better than previous methods. By fitting SKEL to SMPL meshes we are able to "upgrade" existing human pose and shape datasets to include biomechanical parameters. SKEL provides a new tool to enable biomechanics in the wild, while also providing vision and graphics researchers with a better constrained and more realistic model of human articulation. The model, code, and data are available for research at https://skel.is.tue.mpg.de..

Skeletonization is a popular shape analysis technique that models an object's interior as opposed to just its boundary. Fitting template-based skeletal models is a time-consuming process requiring much manual parameter tuning. Recently, machine learning-based methods have shown promise for generating s-reps from object boundaries. In this work, we propose a new skeletonization method which leverages graph convolutional networks to produce skeletal representations (s-reps) from dense segmentation masks. The method is evaluated on both synthetic data and real hippocampus segmentations, achieving promising results and fast inference.

Tool use has become central to modern LLM agents, yet interface design is rarely isolated as an experimental variable. This paper studies whether schema based tool contracts and structured validation diagnostics improve reliability under strict interaction budgets. We evaluate three conditions that preserve identical tool semantics and information content: free form documentation, JSON Schema specifications, and JSON Schema with structured diagnostics. We implement a deterministic software engineering sandbox with logs, metrics, configurations, and repository tasks, and evaluate a fully crossed pilot with one open local model, three seeds, three interface conditions, and four budgets. We report end task success, interface misuse, execution failures, semantic misuse, recovery behavior, and overhead. In this pilot, success remains zero across conditions, while schema conditions reduce interface misuse but not semantic misuse. The evidence supports a precise interpretation that interface formalization improves contract adherence, but semantic action quality and timeout sensitive tasks remain dominant bottlenecks under constrained local inference.

Recent methods for arbitrary-skeleton motion capture from monocular video follow a factorized pipeline, where a Video-to-Pose network predicts joint positions and an analytical inverse-kinematics (IK) stage recovers joint rotations. While effective, this design is inherently limited, since joint positions do not fully determine rotations and leave degrees of freedom such as bone-axis twist ambiguous, and the non-differentiable IK stage prevents the system from adapting to noisy predictions or optimizing for the final animation objective. In this work, we present the first fully end-to-end framework in which both Video-to-Pose and Pose-to-Rotation are learnable and jointly optimized. We observe that the ambiguity in pose-to-rotation mapping arises from missing coordinate system information: the same joint positions can correspond to different rotations under different rest poses and local axis conventions. To resolve this, we introduce a reference pose-rotation pair from the target asset, which, together with the rest pose, not only anchors the mapping but also defines the underlying rotation coordinate system. This formulation turns rotation prediction into a well-constrained conditional problem and enables effective learning. In addition, our model predicts joint positions directly from video without relying on mesh intermediates, improving both robustness and efficiency. Both stages share a skeleton-aware Global-Local Graph-guided Multi-Head Attention (GL-GMHA) module for joint-level local reasoning and global coordination. Experiments on Truebones Zoo and Objaverse show that our method reduces rotation error from ~17 degrees to ~10 degrees, and to 6.54 degrees on unseen skeletons, while achieving ~20x faster inference than mesh-based pipelines. Project page: https://animotionlab.github.io/MoCapAnythingV2/

4D generation has made remarkable progress in synthesizing dynamic 3D objects from input text, images, or videos. However, existing methods often represent motion as an implicit deformation field, which limits direct control and editability. To address this issue, we propose SkeletonGaussian, a novel framework for generating editable dynamic 3D Gaussians from monocular video input. Our approach introduces a hierarchical articulated representation that decomposes motion into sparse rigid motion explicitly driven by a skeleton and fine-grained non-rigid motion. Concretely, we extract a robust skeleton and drive rigid motion via linear blend skinning, followed by a hexplane-based refinement for non-rigid deformations, enhancing interpretability and editability. Experimental results demonstrate that SkeletonGaussian surpasses existing methods in generation quality while enabling intuitive motion editing, establishing a new paradigm for editable 4D generation. Project page: https://wusar.github.io/projects/skeletongaussian/

Generating videos of complex human motions such as flips, cartwheels, and martial arts remains challenging for current video diffusion models. Text-only conditioning is temporally ambiguous for fine-grained motion control, while explicit pose-based controls, though effective, require users to provide complete skeleton sequences that are costly to produce for long and dynamic actions. We propose a two-stage cascaded framework that addresses both limitations. First, an autoregressive text-to-skeleton model generates 2D pose sequences from natural language descriptions by predicting each joint conditioned on previously generated poses. This design captures long-range temporal dependencies and inter-joint coordination required for complex motions. Second, a pose-conditioned video diffusion model synthesizes videos from a reference image and the generated skeleton sequence. It employs DINO-ALF (Adaptive Layer Fusion), a multi-level reference encoder that preserves appearance and clothing details under large pose changes and self-occlusions. To address the lack of publicly available datasets for complex human motion video generation, we introduce a Blender-based synthetic dataset containing 2,000 videos with diverse characters performing acrobatic and stunt-like motions. The dataset provides full control over appearance, motion, and environment. It fills an important gap because existing benchmarks significantly under-represent acrobatic motions while web-collected datasets raise copyright and privacy concerns. Experiments on our synthetic dataset and the Motion-X Fitness benchmark show that our text-to-skeleton model outperforms prior methods on FID, R-precision, and motion diversity. Our pose-to-video model also achieves the best results among all compared methods on VBench metrics for temporal consistency, motion smoothness, and subject preservation.

This work explores the motion transfer from one video to another, which is crucial in animation for diverse characters. Previously, video motion transfer has been largely explored between human and human-like characters, enabling a lot of applications in digital creation. However, these approaches encounter a main limitation. Specifically, related technical pipelines heavily rely on a predefined human skeleton structure and accordingly require skeleton-conditional model training. On the one hand, these methods are difficult to generalize to diverse characters, such as animals from different species, while preserving their unique motion styles. On the other hand, labeled data in diverse skeletons is limited, which additionally restricts the large-scale training for the task. In this paper, we jump out of the skeleton-based motion transfer framework and propose a training-free motion transfer framework, named Motion4Motion. Motion4Motionmodels the motion flow of the character in a video instead of skeletons, which makes motion transfer across species easier. Extensive experimental results and novel applications show our methods outperform baselines impressively. Project page is available at https://lhchen.top/Motion4Motion.

Contrastive learning has gained significant attention in skeleton-based action recognition for its ability to learn robust representations from unlabeled data. However, existing methods rely on a single skeleton convention, which limits their ability to generalize across datasets with diverse joint structures and anatomical coverage. We propose Multi-Skeleton Contrastive Learning (MS-CLR), a general self-supervised framework that aligns pose representations across multiple skeleton conventions extracted from the same sequence. This encourages the model to learn structural invariances and capture diverse anatomical cues, resulting in more expressive and generalizable features. To support this, we adapt the ST-GCN architecture to handle skeletons with varying joint layouts and scales through a unified representation scheme. Experiments on the NTU RGB+D 60 and 120 datasets demonstrate that MS-CLR consistently improves performance over strong single-skeleton contrastive learning baselines. A multi-skeleton ensemble further boosts performance, setting new state-of-the-art results on both datasets.

The skeleton of a digital image is a compact representation of its topology, geometry, and scale. It has utility in many computer vision applications, such as image description, segmentation, and registration. However, skeletonization has only seen limited use in contemporary deep learning solutions. Most existing skeletonization algorithms are not differentiable, making it impossible to integrate them with gradient-based optimization. Compatible algorithms based on morphological operations and neural networks have been proposed, but their results often deviate from the geometry and topology of the true medial axis. This work introduces the first three-dimensional skeletonization algorithm that is both compatible with gradient-based optimization and preserves an object's topology. Our method is exclusively based on matrix additions and multiplications, convolutional operations, basic non-linear functions, and sampling from a uniform probability distribution, allowing it to be easily implemented in any major deep learning library. In benchmarking experiments, we prove the advantages of our skeletonization algorithm compared to non-differentiable, morphological, and neural-network-based baselines. Finally, we demonstrate the utility of our algorithm by integrating it with two medical image processing applications that use gradient-based optimization: deep-learning-based blood vessel segmentation, and multimodal registration of the mandible in computed tomography and magnetic resonance images.

For learning generalizable motion representations from large-scale unlabeled data, Self-supervised learning (SSL) has become a widely adopted methodology. However, existing approaches are primarily limited by the inherent heterogeneity of skeleton data---characterized by varying joint counts, indexing protocols, and topological structures across different sensors---which typically necessitates training separate, sensor-specific, or even entirely dataset-specific models. To overcome this, we introduce SOfA (Skeleton One for All), the first generalist foundation model designed to achieve sensor-unified skeleton representation learning across diverse sensors. To accommodate the dimensional gap caused by varying joint counts, we introduce a fixed-size set of learnable Canonical Joint Slots, acting as a universal vessel that seamlessly accommodates arbitrary skeletal topologies. SOfA fills these slots via an attention mechanism that dynamically aggregates skeletal information from sensor-specific inputs. Furthermore, we resolve joint index misalignment between various sensors by introducing a Semantic Joint Embedding derived from a pre-trained text encoder, rather than relying on absolute positional embeddings. To validate our approach, we standardized ten 3D skeleton datasets for unified training. Extensive experiments demonstrate that SOfA can serve as a truly universal encoder, achieving state-of-the-art (SOTA) performance across a wide range of downstream tasks and sensor types, often outperforming dataset-specific specialist models with a single foundation model.

This paper considers the problem of modeling articulated objects captured in 2D videos to enable novel view synthesis, while also being easily editable, drivable, and re-posable. To tackle this challenging problem, we propose RigGS, a new paradigm that leverages 3D Gaussian representation and skeleton-based motion representation to model dynamic objects without utilizing additional template priors. Specifically, we first propose skeleton-aware node-controlled deformation, which deforms a canonical 3D Gaussian representation over time to initialize the modeling process, producing candidate skeleton nodes that are further simplified into a sparse 3D skeleton according to their motion and semantic information. Subsequently, based on the resulting skeleton, we design learnable skin deformations and pose-dependent detailed deformations, thereby easily deforming the 3D Gaussian representation to generate new actions and render further high-quality images from novel views. Extensive experiments demonstrate that our method can generate realistic new actions easily for objects and achieve high-quality rendering.

With the rapid advancement of 3D representation techniques and generative models, substantial progress has been made in reconstructing full-body 3D avatars from a single image. However, this task remains fundamentally ill-posedness due to the limited information available from monocular input, making it difficult to control the geometry and texture of occluded regions during generation. To address these challenges, we redesign the reconstruction pipeline and propose Dream3DAvatar, an efficient and text-controllable two-stage framework for 3D avatar generation. In the first stage, we develop a lightweight, adapter-enhanced multi-view generation model. Specifically, we introduce the Pose-Adapter to inject SMPL-X renderings and skeletal information into SDXL, enforcing geometric and pose consistency across views. To preserve facial identity, we incorporate ID-Adapter-G, which injects high-resolution facial features into the generation process. Additionally, we leverage BLIP2 to generate high-quality textual descriptions of the multi-view images, enhancing text-driven controllability in occluded regions. In the second stage, we design a feedforward Transformer model equipped with a multi-view feature fusion module to reconstruct high-fidelity 3D Gaussian Splat representations (3DGS) from the generated images. Furthermore, we introduce ID-Adapter-R, which utilizes a gating mechanism to effectively fuse facial features into the reconstruction process, improving high-frequency detail recovery. Extensive experiments demonstrate that our method can generate realistic, animation-ready 3D avatars without any post-processing and consistently outperforms existing baselines across multiple evaluation metrics.

Reconstructing interacting hands from monocular images is indispensable in AR/VR applications. Most existing solutions rely on the accurate localization of each skeleton joint. However, these methods tend to be unreliable due to the severe occlusion and confusing similarity among adjacent hand parts. This also defies human perception because humans can quickly imitate an interaction pattern without localizing all joints. Our key idea is to first construct a two-hand interaction prior and recast the interaction reconstruction task as the conditional sampling from the prior. To expand more interaction states, a large-scale multimodal dataset with physical plausibility is proposed. Then a VAE is trained to further condense these interaction patterns as latent codes in a prior distribution. When looking for image cues that contribute to interaction prior sampling, we propose the interaction adjacency heatmap (IAH). Compared with a joint-wise heatmap for localization, IAH assigns denser visible features to those invisible joints. Compared with an all-in-one visible heatmap, it provides more fine-grained local interaction information in each interaction region. Finally, the correlations between the extracted features and corresponding interaction codes are linked by the ViT module. Comprehensive evaluations on benchmark datasets have verified the effectiveness of this framework. The code and dataset are publicly available at https://github.com/binghui-z/InterPrior_pytorch

The explosion of generative 3D assets has created a massive demand for animation, yet current motion capture methods remain brittle, restricted to species-specific templates (e.g., SMPL) or requiring labor-intensive manual rigging. We introduce TopoCap, the first unified framework capable of extracting motion from monocular video and retargeting it onto characters with arbitrary, unseen skeletal topologies, i.e., from bipeds to hexapods and inanimate objects, without test-time optimization. Our key insight is that while skeletal structures are combinatorial and discrete, the underlying physics of motion occupy a continuous, low-dimensional manifold. We materialize this insight via a two-stage generative pipeline. First, we learn a Universal Motion Manifold using a Graph CVAE that compresses heterogeneous kinematic chains into a shared, fixed-length latent code. By explicitly conditioning the decoder on a structural embedding of the target rig, we disentangle motion dynamics from skeletal topology. Second, we treat video-to-animation as a conditional flow matching problem, predicting these topology-agnostic codes from visual features. To learn this generalized prior, we introduce Mobjaverse, a massive-scale dataset curated from Objaverse-XL. Comprising over 5,000 unique skeletal topologies and 2 million frames, it exceeds the structural diversity of existing datasets by two orders of magnitude. Extensive experiments demonstrate that \MethodMotion outperforms specialist models on human and quadruped benchmarks while enabling zero-shot retargeting for the long tail of 3D creatures. Dataset is publicly available at https://huggingface.co/datasets/duckduckplz/Mobjaverse.

Previous motion generation methods are limited to the pre-rigged 3D human model, hindering their applications in the animation of various non-rigged characters. In this work, we present TapMo, a Text-driven Animation Pipeline for synthesizing Motion in a broad spectrum of skeleton-free 3D characters. The pivotal innovation in TapMo is its use of shape deformation-aware features as a condition to guide the diffusion model, thereby enabling the generation of mesh-specific motions for various characters. Specifically, TapMo comprises two main components - Mesh Handle Predictor and Shape-aware Diffusion Module. Mesh Handle Predictor predicts the skinning weights and clusters mesh vertices into adaptive handles for deformation control, which eliminates the need for traditional skeletal rigging. Shape-aware Motion Diffusion synthesizes motion with mesh-specific adaptations. This module employs text-guided motions and mesh features extracted during the first stage, preserving the geometric integrity of the animations by accounting for the character's shape and deformation. Trained in a weakly-supervised manner, TapMo can accommodate a multitude of non-human meshes, both with and without associated text motions. We demonstrate the effectiveness and generalizability of TapMo through rigorous qualitative and quantitative experiments. Our results reveal that TapMo consistently outperforms existing auto-animation methods, delivering superior-quality animations for both seen or unseen heterogeneous 3D characters.

Inverse kinematics (IK) is a core operation in animation, robotics, and biomechanics: given Cartesian constraints, recover joint rotations under a known kinematic tree. In many real-time human avatar pipelines, the available signal per frame is a sparse set of tracked 3D joint positions, whereas animation systems require joint orientations to drive skinning. Recovering full orientations from positions is underconstrained, most notably because twist about bone axes is ambiguous, and classical IK solvers typically rely on iterative optimization that can be slow and sensitive to noisy inputs. We introduce IK-GAT, a lightweight graph-attention network that reconstructs full-body joint orientations from 3D joint positions in a single forward pass. The model performs message passing over the skeletal parent-child graph to exploit kinematic structure during rotation inference. To simplify learning, IK-GAT predicts rotations in a bone-aligned world-frame representation anchored to rest-pose bone frames. This parameterization makes the twist axis explicit and is exactly invertible to standard parent-relative local rotations given the kinematic tree and rest pose. The network uses a continuous 6D rotation representation and is trained with a geodesic loss on SO(3) together with an optional forward-kinematics consistency regularizer. IK-GAT produces animation-ready local rotations that can directly drive a rigged avatar or be converted to pose parameters of SMPL-like body models for real-time and online applications. With 374K parameters and over 650 FPS on CPU, IK-GAT outperforms VPoser-based per-frame iterative optimization without warm-start at significantly lower cost, and is robust to initial pose and input noise

We introduce a method for transferring the signer's appearance in sign language skeletal poses while preserving the sign content. Using estimated poses, we transfer the appearance of one signer to another, maintaining natural movements and transitions. This approach improves pose-based rendering and sign stitching while obfuscating identity. Our experiments show that while the method reduces signer identification accuracy, it slightly harms sign recognition performance, highlighting a tradeoff between privacy and utility. Our code is available at https://github.com/sign-language-processing/pose-anonymization.

The rapid evolution of 3D content creation, encompassing both AI-powered methods and traditional workflows, is driving an unprecedented demand for automated rigging solutions that can keep pace with the increasing complexity and diversity of 3D models. We introduce UniRig, a novel, unified framework for automatic skeletal rigging that leverages the power of large autoregressive models and a bone-point cross-attention mechanism to generate both high-quality skeletons and skinning weights. Unlike previous methods that struggle with complex or non-standard topologies, UniRig accurately predicts topologically valid skeleton structures thanks to a new Skeleton Tree Tokenization method that efficiently encodes hierarchical relationships within the skeleton. To train and evaluate UniRig, we present Rig-XL, a new large-scale dataset of over 14,000 rigged 3D models spanning a wide range of categories. UniRig significantly outperforms state-of-the-art academic and commercial methods, achieving a 215% improvement in rigging accuracy and a 194% improvement in motion accuracy on challenging datasets. Our method works seamlessly across diverse object categories, from detailed anime characters to complex organic and inorganic structures, demonstrating its versatility and robustness. By automating the tedious and time-consuming rigging process, UniRig has the potential to speed up animation pipelines with unprecedented ease and efficiency. Project Page: https://zjp-shadow.github.io/works/UniRig/

Capturing and maintaining geometric interactions among different body parts is crucial for successful motion retargeting in skinned characters. Existing approaches often overlook body geometries or add a geometry correction stage after skeletal motion retargeting. This results in conflicts between skeleton interaction and geometry correction, leading to issues such as jittery, interpenetration, and contact mismatches. To address these challenges, we introduce a new retargeting framework, MeshRet, which directly models the dense geometric interactions in motion retargeting. Initially, we establish dense mesh correspondences between characters using semantically consistent sensors (SCS), effective across diverse mesh topologies. Subsequently, we develop a novel spatio-temporal representation called the dense mesh interaction (DMI) field. This field, a collection of interacting SCS feature vectors, skillfully captures both contact and non-contact interactions between body geometries. By aligning the DMI field during retargeting, MeshRet not only preserves motion semantics but also prevents self-interpenetration and ensures contact preservation. Extensive experiments on the public Mixamo dataset and our newly-collected ScanRet dataset demonstrate that MeshRet achieves state-of-the-art performance. Code available at https://github.com/abcyzj/MeshRet.

Skinning and rigging are fundamental components in animation, articulated object reconstruction, motion transfer, and 4D generation. Existing approaches predominantly rely on Linear Blend Skinning (LBS), due to its simplicity and differentiability. However, LBS introduces artifacts such as volume loss and unnatural deformations, and it fails to model elastic materials like soft tissues, fur, and flexible appendages (e.g., elephant trunks, ears, and fatty tissues). In this work, we propose PhysRig: a differentiable physics-based skinning and rigging framework that overcomes these limitations by embedding the rigid skeleton into a volumetric representation (e.g., a tetrahedral mesh), which is simulated as a deformable soft-body structure driven by the animated skeleton. Our method leverages continuum mechanics and discretizes the object as particles embedded in an Eulerian background grid to ensure differentiability with respect to both material properties and skeletal motion. Additionally, we introduce material prototypes, significantly reducing the learning space while maintaining high expressiveness. To evaluate our framework, we construct a comprehensive synthetic dataset using meshes from Objaverse, The Amazing Animals Zoo, and MixaMo, covering diverse object categories and motion patterns. Our method consistently outperforms traditional LBS-based approaches, generating more realistic and physically plausible results. Furthermore, we demonstrate the applicability of our framework in the pose transfer task highlighting its versatility for articulated object modeling.

Motion capture now underpins content creation far beyond digital humans, yet most existing pipelines remain species- or template-specific. We formalize this gap as Category-Agnostic Motion Capture (CAMoCap): given a monocular video and an arbitrary rigged 3D asset as a prompt, the goal is to reconstruct a rotation-based animation such as BVH that directly drives the specific asset. We present MoCapAnything, a reference-guided, factorized framework that first predicts 3D joint trajectories and then recovers asset-specific rotations via constraint-aware inverse kinematics. The system contains three learnable modules and a lightweight IK stage: (1) a Reference Prompt Encoder that extracts per-joint queries from the asset's skeleton, mesh, and rendered images; (2) a Video Feature Extractor that computes dense visual descriptors and reconstructs a coarse 4D deforming mesh to bridge the gap between video and joint space; and (3) a Unified Motion Decoder that fuses these cues to produce temporally coherent trajectories. We also curate Truebones Zoo with 1038 motion clips, each providing a standardized skeleton-mesh-render triad. Experiments on both in-domain benchmarks and in-the-wild videos show that MoCapAnything delivers high-quality skeletal animations and exhibits meaningful cross-species retargeting across heterogeneous rigs, enabling scalable, prompt-driven 3D motion capture for arbitrary assets. Project page: https://animotionlab.github.io/MoCapAnything/

With the rapid evolution of 3D generation algorithms, the cost of producing 3D humanoid character models has plummeted, yet the field is impeded by the lack of a comprehensive dataset for automatic rigging, which is a pivotal step in character animation. Addressing this gap, we present HumanRig, the first large-scale dataset specifically designed for 3D humanoid character rigging, encompassing 11,434 meticulously curated T-posed meshes adhered to a uniform skeleton topology. Capitalizing on this dataset, we introduce an innovative, data-driven automatic rigging framework, which overcomes the limitations of GNN-based methods in handling complex AI-generated meshes. Our approach integrates a Prior-Guided Skeleton Estimator (PGSE) module, which uses 2D skeleton joints to provide a preliminary 3D skeleton, and a Mesh-Skeleton Mutual Attention Network (MSMAN) that fuses skeleton features with 3D mesh features extracted by a U-shaped point transformer. This enables a coarse-to-fine 3D skeleton joint regression and a robust skinning estimation, surpassing previous methods in quality and versatility. This work not only remedies the dataset deficiency in rigging research but also propels the animation industry towards more efficient and automated character rigging pipelines.

Large language model (LLM) agents are evolving from request-response assistants into long-running software actors: they maintain state across model calls, fork subtasks, wait for external events, request human authority, generate tools, and perform side effects that must be resumed and audited. This paper presents Agent libOS, a library-OS-inspired runtime substrate for LLM agents. Agent libOS runs above a conventional host operating system; it does not implement hardware drivers, kernel-mode isolation, or a POSIX-compatible operating system. Instead, it treats an agent as an AgentProcess: a schedulable execution subject with process identity, parent-child lineage, lifecycle state, a tool table derived from an AgentImage, typed Object Memory, explicit capabilities, human queues, checkpoints, events, and audit records. Its central design rule is tools are libc-like wrappers; runtime primitives are the authority boundary. Filesystem access, object access, sleeps, human approval, JIT tool registration, and external side effects are checked at primitive boundaries under explicit capabilities and policy. We describe the design, threat model, Python prototype, and safety-oriented evaluation. The current prototype implements async scheduling, namespace-local Object Memory, runtime-integrated human approval, one-shot permission grants, per-process working directories, shell and image-registration primitives, Deno/TypeScript JIT tools over a libOS syscall broker, filesystem/object bridge tools, an injectable Resource Provider Substrate, deterministic demos, real-model smoke scripts, and 123 regression tests at the time of writing. Rather than improving planner accuracy, Agent libOS demonstrates a runtime substrate in which long-running LLM agents can be scheduled, authorized, resumed, and audited without treating tool dispatch as the trust boundary.

With the explosive growth of 3D content creation, there is an increasing demand for automatically converting static 3D models into articulation-ready versions that support realistic animation. Traditional approaches rely heavily on manual annotation, which is both time-consuming and labor-intensive. Moreover, the lack of large-scale benchmarks has hindered the development of learning-based solutions. In this work, we present MagicArticulate, an effective framework that automatically transforms static 3D models into articulation-ready assets. Our key contributions are threefold. First, we introduce Articulation-XL, a large-scale benchmark containing over 33k 3D models with high-quality articulation annotations, carefully curated from Objaverse-XL. Second, we propose a novel skeleton generation method that formulates the task as a sequence modeling problem, leveraging an auto-regressive transformer to naturally handle varying numbers of bones or joints within skeletons and their inherent dependencies across different 3D models. Third, we predict skinning weights using a functional diffusion process that incorporates volumetric geodesic distance priors between vertices and joints. Extensive experiments demonstrate that MagicArticulate significantly outperforms existing methods across diverse object categories, achieving high-quality articulation that enables realistic animation. Project page: https://chaoyuesong.github.io/MagicArticulate.

Motion generation is fundamental to computer animation and widely used across entertainment, robotics, and virtual environments. While recent methods achieve impressive results, most rely on fixed skeletal templates, which prevent them from generalizing to skeletons with different or perturbed topologies. We address the core limitation of current motion generation methods - the combined lack of large-scale heterogeneous animal motion data and unified generative frameworks capable of jointly modeling arbitrary skeletal topologies and textual conditions. To this end, we introduce OmniZoo, a large-scale animal motion dataset spanning 140 species and 32,979 sequences, enriched with multimodal annotations. Building on OmniZoo, we propose a generalized autoregressive motion generation framework capable of producing text-driven motions for arbitrary skeletal topologies. Central to our model is a Topology-aware Skeleton Embedding Module that encodes geometric and structural properties of any skeleton into a shared token space, enabling seamless fusion with textual semantics. Given a text prompt and a target skeleton, our method generates temporally coherent, physically plausible, and semantically aligned motions, and further enables cross-species motion style transfer.

Generating motion for arbitrary skeletons is a longstanding challenge in computer graphics, remaining largely unexplored due to the scarcity of diverse datasets and the irregular nature of the data. In this work, we introduce AnyTop, a diffusion model that generates motions for diverse characters with distinct motion dynamics, using only their skeletal structure as input. Our work features a transformer-based denoising network, tailored for arbitrary skeleton learning, integrating topology information into the traditional attention mechanism. Additionally, by incorporating textual joint descriptions into the latent feature representation, AnyTop learns semantic correspondences between joints across diverse skeletons. Our evaluation demonstrates that AnyTop generalizes well, even with as few as three training examples per topology, and can produce motions for unseen skeletons as well. Furthermore, our model's latent space is highly informative, enabling downstream tasks such as joint correspondence, temporal segmentation and motion editing. Our webpage, https://anytop2025.github.io/Anytop-page, includes links to videos and code.

Modern coding agents expose multiple tool surfaces -- IDE primitives, bash, and Model Context Protocol (MCP) code-execution -- and the field has shipped three contradictory claims about which one matters. We run the missing crossed comparison: an integrity-clean three-arm ablation (baseline / bash_only / code_only) on synthetic computation tasks and SWE-bench Mini modification tasks, holding model, harness, and prompts fixed, with two agents (Claude Code, OpenAI Codex CLI) so the comparison spans both regime and agent-design axes. Across the four resulting (regime, agent) cells, restricting the agent to a single execute_code MCP tool is cheaper than -- or statistically tied with -- its cheapest tool-rich rival in three cells (significantly on Artifact/Claude and SWE-bench/Codex; directionally on Artifact/Codex), with pass rates statistically tied within each cell. The lone exception is SWE-bench/Claude, where code_only is directionally costlier (+14.4%, not significant); a conditional-cost analysis localizes that gap to failure-cost on doomed-run trajectories, not a per-edit tax on successful runs. Two implications: the cheapest tool surface is jointly determined by task regime and agent design rather than by either axis alone, and the headline cost signal lives in cache-adjusted cost -- not pass rate, which is invariant across surfaces at the model sizes we evaluate. The benchmark harness, task suite, and analysis code are available at https://github.com/hyang0129/onlycodes.

Understanding physical human-robot and human-human interactions is a challenging yet emerging topic in 3D vision. While most existing methods rely on skeleton sequences--effective in low-light and privacy-sensitive environment--they face two major challenges: 1) learning and effectively exploiting interaction cues from skeletal data, and 2) compensating for the lack of visual information absent in skeletons alone. To address these challenges, we propose skeletal token alignment and rearrangement (STAR) for human-robot and human-human interaction recognition. It learns interaction-specific skeleton features and enriches them using visual cues by aligning skeleton and RGB video representations in a shared latent space. Specifically, STAR consists of three key components. First, we design a skeleton encoder that captures fine-grained interdependencies using Entity Rearrangement (ER) and Interactive Spatiotemporal Tokens (ISTs). Second, we present Visual Interaction Encoding that introduces a Focus on Interactions (FoI) strategy to attend to spatiotemporal regions relevant to interactions in RGB videos. Finally, these representations are aligned via a contrastive learning objective, with a refinement head further refines predictions. During training, STAR leverages both skeleton and RGB video data to learn robust, discriminative interaction representations. At inference time, it operates on skeletons alone, retaining visual-informed benefits while preserving skeleton-only efficiency. Extensive experiments on Chico, HARPER, NTU Mutual 11 and 26 datasets consistently validate our approach by demonstrating superior performance over state-of-the-art methods. Our code is publicly available at https://github.com/Necolizer/STAR.

Modern LLM agents are often improved by modifying prompts, tools, or workflows manually, while the executable scaffold surrounding the model---the harness---is typically treated as a fixed artifact after deployment. This work studies an alternative where the harness is task-specific and continuously evolvable: each task family maintains its own harness, which is hot-swapped across iterations through a fixed task-injection seam and rewritten using environment feedback. We introduce Hierarchical Self-Improvement (HSI), a framework in which a single frozen LLM M operates across three hierarchical scopes: a task harness H that executes tasks, an evolver that rewrites H, and a meta-evolver that rewrites the evolver's strategy code under a frozen outer anchor. A thinking-on/off design isolates the contribution of harness evolution by disabling reasoning during task execution while enabling it during self-modification. HSI is bounded by two factors: a feedback-fidelity bound, since evolution requires informative reward signals to guide selection, and a backbone capability bound, since harness redesign cannot overcome limitations of the frozen model. On BALROG with DeepSeek-V4-Flash-Preview as the frozen backbone, HSI achieves consistent gains over the initial harness on moderate-difficulty tasks (+39.3 on BabyAI, +33.0 on Crafter, +25.0 on TextWorld, and +15.0 on MiniHack, all in raw \% Progress), while obtaining strong held-out generalization on BabaIsAI sub-suites (0.98 best-test on BreakStop and 1.00 on GoTo from a 20% unseen split). On tasks beyond the backbone's capability (NLE), harness evolution provides no improvement. These results demonstrate task-specific harness evolution as a viable axis for improving frozen LLM agents under clear empirical limits. Code is available at https://github.com/TailinZhou/hsi.

We present BoneAgeTW2, the first fully open-source system to automate the complete Tanner-Whitehouse 2 (TW2) clinical protocol for skeletal maturity assessment end-to-end. The system employs YOLOv8 for precise detection and localization of the 20 TW2 hand bones from radiographic images, and an EfficientNet-B3 backbone with 20 independent classification heads to assign maturation stages (A-I) to each bone simultaneously. From these predictions, the system automatically generates clinical PDF reports including interactive Gaussian distribution curves for all 20 bones, enabling direct comparison with population norms. The model is trained on the public RSNA Pediatric Bone Age Challenge dataset (12,611 hand radiographs) using a pseudo-labeling strategy to derive per-bone stage labels from global bone age annotations. The full codebase is publicly available at https://github.com/jmmana/BoneAgeTW2.

Large language models (LLMs) have transformed code generation. However, most existing approaches focus on mainstream languages such as Python and Java, neglecting the Solidity language, the predominant programming language for Ethereum smart contracts. Due to the lack of adequate benchmarks for Solidity, LLMs' ability to generate secure, cost-effective smart contracts remains unexplored. To fill this gap, we construct SolEval, the first repository-level benchmark designed for Solidity smart contract generation, to evaluate the performance of LLMs on Solidity. SolEval consists of 1,125 samples from 9 different repositories, covering 6 popular domains, providing LLMs with a comprehensive evaluation benchmark. Unlike the existing Solidity benchmark, SolEval not only includes complex function calls but also reflects the real-world complexity of the Ethereum ecosystem by incorporating gas fee and vulnerability rate. We evaluate 10 LLMs on SolEval, and our results show that the best-performing LLM achieves only 26.29% Pass@10, highlighting substantial room for improvement in Solidity code generation by LLMs. We release our data and code at https://anonymous.4open.science/r/SolEval-1C06/.

Animating various character drawings is an engaging visual content creation task. Given a single character drawing, existing animation methods are limited to flat 2D motions and thus lack 3D effects. An alternative solution is to reconstruct a 3D model from a character drawing as a proxy and then retarget 3D motion data onto it. However, the existing image-to-3D methods could not work well for amateur character drawings in terms of appearance and geometry. We observe the contour lines, commonly existing in character drawings, would introduce significant ambiguity in texture synthesis due to their view-dependence. Additionally, thin regions represented by single-line contours are difficult to reconstruct (e.g., slim limbs of a stick figure) due to their delicate structures. To address these issues, we propose a novel system, DrawingSpinUp, to produce plausible 3D animations and breathe life into character drawings, allowing them to freely spin up, leap, and even perform a hip-hop dance. For appearance improvement, we adopt a removal-then-restoration strategy to first remove the view-dependent contour lines and then render them back after retargeting the reconstructed character. For geometry refinement, we develop a skeleton-based thinning deformation algorithm to refine the slim structures represented by the single-line contours. The experimental evaluations and a perceptual user study show that our proposed method outperforms the existing 2D and 3D animation methods and generates high-quality 3D animations from a single character drawing. Please refer to our project page (https://lordliang.github.io/DrawingSpinUp) for the code and generated animations.

Recent advances in diffusion models have greatly improved pose-driven character animation. However, existing methods are limited to spatially aligned reference-pose pairs with matched skeletal structures. Handling reference-pose misalignment remains unsolved. To address this, we present One-to-All Animation, a unified framework for high-fidelity character animation and image pose transfer for references with arbitrary layouts. First, to handle spatially misaligned reference, we reformulate training as a self-supervised outpainting task that transforms diverse-layout reference into a unified occluded-input format. Second, to process partially visible reference, we design a reference extractor for comprehensive identity feature extraction. Further, we integrate hybrid reference fusion attention to handle varying resolutions and dynamic sequence lengths. Finally, from the perspective of generation quality, we introduce identity-robust pose control that decouples appearance from skeletal structure to mitigate pose overfitting, and a token replace strategy for coherent long-video generation. Extensive experiments show that our method outperforms existing approaches. The code and model are available at https://github.com/ssj9596/One-to-All-Animation.

Generating accurate and realistic virtual human movements in real-time is of high importance for a variety of applications in computer graphics, interactive virtual environments, robotics, and biomechanics. This paper introduces a novel real-time inverse kinematics (IK) solver specifically designed for realistic human-like movement generation. Leveraging the automatic differentiation and just-in-time compilation of TensorFlow, the proposed solver efficiently handles complex articulated human skeletons with high degrees of freedom. By treating forward and inverse kinematics as differentiable operations, our method effectively addresses common challenges such as error accumulation and complicated joint limits in multi-constrained problems, which are critical for realistic human motion modeling. We demonstrate the solver's effectiveness on the SMPLX human skeleton model, evaluating its performance against widely used iterative-based IK algorithms, like Cyclic Coordinate Descent (CCD), FABRIK, and the nonlinear optimization algorithm IPOPT. Our experiments cover both simple end-effector tasks and sophisticated, multi-constrained problems with realistic joint limits. Results indicate that our IK solver achieves real-time performance, exhibiting rapid convergence, minimal computational overhead per iteration, and improved success rates compared to existing methods. The project code is available at https://github.com/hvoss-techfak/TF-JAX-IK

Monocular video human mesh recovery is essential for digital humans, avatar animation, and embodied simulation, where both temporal stability and expressive whole-body motion are required. Existing video HMR methods produce coherent body motion but often overlook detailed hand articulation, while image-based whole-body methods recover SMPL-X meshes independently per frame, often leading to jittery and inaccurate hand motion. We present a temporally coherent whole-body HMR framework for challenging in-the-wild monocular videos. Our model unifies body context and part-specific hand observations through residual body-hand fusion, enabling stable body motion and detailed hand recovery within a single temporal architecture. We further introduce close-up-aware augmentation to improve robustness under upper-body framing. Experiments on whole-body and body-only benchmarks demonstrate improved hand reconstruction and competitive body accuracy. Our method also produces temporally stable and 2D-consistent SMPL-X motion in challenging real-world videos.

Smart contracts written in Solidity manage assets, permissions, and irreversible state changes, making code generation both useful and security-critical. Repository-level Solidity generation is challenging because models must synthesize complete contracts or libraries while preserving consistency across state variables, modifiers, events, inheritance, external calls, and access-control logic. We present RAPO-Sol, a two-stage training framework for repository-level Solidity code generation. First, Retrieval-Augmented Fine-Tuning (RAFT) augments each training input with similar Solidity examples, helping the model learn recurring contract-level patterns while remaining retrieval-free at inference time. Second, Direct Preference Optimization (DPO) trains the model to prefer reference contracts over close but semantically flawed alternatives. We construct rejected samples using Solidity Semantic-Anchor Perturbation (SAP), which perturbs validation statements, visibility modifiers, data-location keywords, context variables, payment operations, and low-level calls. Experiments on SolidityBench with CodeLlama-7B-Instruct, DeepSeek-Coder-6.7B-Instruct, and Qwen2.5-Coder-7B-Instruct show that RAFT consistently improves over supervised fine-tuning, while SAP-based DPO provides further gains in BLEU and SolidityScore. The full RAFT+DPO pipeline achieves the best performance across all three models, demonstrating complementary benefits from retrieval during training and Solidity-aware preference optimization without adding retrieval cost at inference.

Recently, diffusion-based methods for monocular 3D human pose estimation have achieved state-of-the-art (SOTA) performance by directly regressing the 3D joint coordinates from the 2D pose sequence. Although some methods decompose the task into bone length and bone direction prediction based on the human anatomical skeleton to explicitly incorporate more human body prior constraints, the performance of these methods is significantly lower than that of the SOTA diffusion-based methods. This can be attributed to the tree structure of the human skeleton. Direct application of the disentangled method could amplify the accumulation of hierarchical errors, propagating through each hierarchy. Meanwhile, the hierarchical information has not been fully explored by the previous methods. To address these problems, a Disentangled Diffusion-based 3D Human Pose Estimation method with Hierarchical Spatial and Temporal Denoiser is proposed, termed DDHPose. In our approach: (1) We disentangle the 3D pose and diffuse the bone length and bone direction during the forward process of the diffusion model to effectively model the human pose prior. A disentanglement loss is proposed to supervise diffusion model learning. (2) For the reverse process, we propose Hierarchical Spatial and Temporal Denoiser (HSTDenoiser) to improve the hierarchical modeling of each joint. Our HSTDenoiser comprises two components: the Hierarchical-Related Spatial Transformer (HRST) and the Hierarchical-Related Temporal Transformer (HRTT). HRST exploits joint spatial information and the influence of the parent joint on each joint for spatial modeling, while HRTT utilizes information from both the joint and its hierarchical adjacent joints to explore the hierarchical temporal correlations among joints. Code and models are available at https://github.com/Andyen512/DDHPose

Production LLM-agent frameworks expose control primitives -- human-in-the-loop approval gates, run cancellation, and execution timeouts -- whose names and documentation imply barrier semantics: while a run is paused, cancelled, or timed out, no gated side effect executes. We show this implied contract holds on none of the six widely used open-source frameworks we test. Model-free differential probes isolate a recurring sibling leak -- an approval gate suspends its own branch while a sibling branch's effect executes during the pause, so a later rejection cannot prevent it -- in every framework shipping a pre-execution gate (five of six), plus three further gaps: replay double-execution, cancellation orphans, and timeout zombies. The hazard is reachable, not merely constructible: under an a-priori-fixed protocol, frontier models emit the leak-triggering plan shape at pooled rates up to 14%, and when live models drive the unmodified frameworks under an approval pause, 215 of 1,200 runs execute their effect during the pause, across three schedulers and two language runtimes. To repair the measured gaps we present SOUNDGATE, an environment-external effect gate in Rust through which every side effect must be admitted, enforcing hold-until-decided, reject-cancels, dedup-on-replay, and fence-on-cancel -- one property per violation class -- under a stated complete-mediation contract discharged for network egress by kernel-enforced routes. We verify the properties over a model of the admission core (Verus; TLA+/TLC, exhaustive to 7.5e7 states; TLAPS), model-check the deployed Rust with Loom, and bridge model to code by differential conformance over 1.2e7 operations -- refinement evidence, not a mechanized proof. SOUNDGATE blocks every measured violation end-to-end on all six frameworks while releasing legitimate effects, at about 1 ms admission per write and 12k-26k durable admissions per second.

Co-speech gesture video generation aims to synthesize realistic, audio-aligned videos of speakers, complete with synchronized facial expressions and body gestures. This task presents challenges due to the significant one-to-many mapping between audio and visual content, further complicated by the scarcity of large-scale public datasets and high computational demands. We propose a lightweight framework that utilizes 2D full-body skeletons as an efficient auxiliary condition to bridge audio signals with visual outputs. Our approach introduces a diffusion model conditioned on fine-grained audio segments and a skeleton extracted from the speaker's reference image, predicting skeletal motions through skeleton-audio feature fusion to ensure strict audio coordination and body shape consistency. The generated skeletons are then fed into an off-the-shelf human video generation model with the speaker's reference image to synthesize high-fidelity videos. To democratize research, we present CSG-405-the first public dataset with 405 hours of high-resolution videos across 71 speech types, annotated with 2D skeletons and diverse speaker demographics. Experiments show that our method exceeds state-of-the-art approaches in visual quality and synchronization while generalizing across speakers and contexts. Code, models, and CSG-405 are publicly released at https://mpi-lab.github.io/Democratizing-CSG/

The rapid proliferation of generative 3D models has created a critical bottleneck in animation pipelines: rigging. Existing automated methods are fundamentally limited by their approach to skinning, treating it as an ill-posed, high-dimensional regression task that is inefficient to optimize and is typically decoupled from skeleton generation. We posit this is a representation problem and introduce SkinTokens: a learned, compact, and discrete representation for skinning weights. By leveraging an FSQ-CVAE to capture the intrinsic sparsity of skinning, we reframe the task from continuous regression to a more tractable token sequence prediction problem. This representation enables TokenRig, a unified autoregressive framework that models the entire rig as a single sequence of skeletal parameters and SkinTokens, learning the complicated dependencies between skeletons and skin deformations. The unified model is then amenable to a reinforcement learning stage, where tailored geometric and semantic rewards improve generalization to complex, out-of-distribution assets. Quantitatively, the SkinTokens representation leads to a 98%-133% percents improvement in skinning accuracy over state-of-the-art methods, while the full TokenRig framework, refined with RL, enhances bone prediction by 17%-22%. Our work presents a unified, generative approach to rigging that yields higher fidelity and robustness, offering a scalable solution to a long-standing challenge in 3D content creation.

Agent Skills package reusable instructions and assets for tool-using language-model agents. Progressive loading creates failure boundaries poorly represented by session-, model-, or tool-centric traces: a Skill can be discovered but not activated, activated without instructions, or appear successful without an independently verified outcome. We present Skill Runtime Intelligence, a passive runtime-intelligence system that reconstructs supported Skill-lifecycle stages across heterogeneous harnesses while preserving unsupported stages as unknown. Its Run Panorama separates immutable events, deterministic relations, inferred diagnoses, and controlled outcomes with four evidence grades; optional trace import and OTLP/HTTP export support existing observability deployments. Across six frozen repository profiles, three coding agents, and seven clean or fault-injected conditions, all 126 executions preserve source worktrees and each correlates to exactly one source session. Yet adapters expose three distinct semantics: no Skill runs; complete runs but no failure-like events; or failure-like events in every operational-failure and clean session. In a seven-template diagnostic study, semantic aliases and Panorama localize the same six non-clean boundaries but differ in exact/status behavior; both Raw views emit a failure status on all 18 clean cases, while Panorama emits none. A known-rule graph conforms to 126/126 frozen contracts, whereas a second model completes only 228/378 calls. These observations motivate executable adapter qualification and show that event presence is not boundary fidelity, composite exact scores mask distinct errors, and model explanations must not overwrite deterministic facts.

Inverse Kinematics (IK) systems are often rigid with respect to their input character, thus requiring user intervention to be adapted to new skeletons. In this paper we aim at creating a flexible, learned IK solver applicable to a wide variety of human morphologies. We extend a state-of-the-art machine learning IK solver to operate on the well known Skinned Multi-Person Linear model (SMPL). We call our model SMPL-IK, and show that when integrated into real-time 3D software, this extended system opens up opportunities for defining novel AI-assisted animation workflows. For example, pose authoring can be made more flexible with SMPL-IK by allowing users to modify gender and body shape while posing a character. Additionally, when chained with existing pose estimation algorithms, SMPL-IK accelerates posing by allowing users to bootstrap 3D scenes from 2D images while allowing for further editing. Finally, we propose a novel SMPL Shape Inversion mechanism (SMPL-SI) to map arbitrary humanoid characters to the SMPL space, allowing artists to leverage SMPL-IK on custom characters. In addition to qualitative demos showing proposed tools, we present quantitative SMPL-IK baselines on the H36M and AMASS datasets.

The conversion from 2D X-ray to 3D shape holds significant potential for improving diagnostic efficiency and safety. However, existing reconstruction methods often rely on hand-crafted features, manual intervention, and prior knowledge, resulting in unstable shape errors and additional processing costs. In this paper, we introduce Swin-X2S, an end-to-end deep learning method for directly reconstructing 3D segmentation and labeling from 2D biplanar orthogonal X-ray images. Swin-X2S employs an encoder-decoder architecture: the encoder leverages 2D Swin Transformer for X-ray information extraction, while the decoder employs 3D convolution with cross-attention to integrate structural features from orthogonal views. A dimension-expanding module is introduced to bridge the encoder and decoder, ensuring a smooth conversion from 2D pixels to 3D voxels. We evaluate proposed method through extensive qualitative and quantitative experiments across nine publicly available datasets covering four anatomies (femur, hip, spine, and rib), with a total of 54 categories. Significant improvements over previous methods have been observed not only in the segmentation and labeling metrics but also in the clinically relevant parameters that are of primary concern in practical applications, which demonstrates the promise of Swin-X2S to provide an effective option for anatomical shape reconstruction in clinical scenarios. Code implementation is available at: https://github.com/liukuan5625/Swin-X2S.

We introduce SAM 3D Body (3DB), a promptable model for single-image full-body 3D human mesh recovery (HMR) that demonstrates state-of-the-art performance, with strong generalization and consistent accuracy in diverse in-the-wild conditions. 3DB estimates the human pose of the body, feet, and hands. It is the first model to use a new parametric mesh representation, Momentum Human Rig (MHR), which decouples skeletal structure and surface shape. 3DB employs an encoder-decoder architecture and supports auxiliary prompts, including 2D keypoints and masks, enabling user-guided inference similar to the SAM family of models. We derive high-quality annotations from a multi-stage annotation pipeline that uses various combinations of manual keypoint annotation, differentiable optimization, multi-view geometry, and dense keypoint detection. Our data engine efficiently selects and processes data to ensure data diversity, collecting unusual poses and rare imaging conditions. We present a new evaluation dataset organized by pose and appearance categories, enabling nuanced analysis of model behavior. Our experiments demonstrate superior generalization and substantial improvements over prior methods in both qualitative user preference studies and traditional quantitative analysis. Both 3DB and MHR are open-source.

Generative models, particularly Large Language Models (LLMs), produce fluent outputs yet lack verifiable guarantees. We adapt Design by Contract (DbC) and type-theoretic principles to introduce a contract layer that mediates every LLM call. Contracts stipulate semantic and type requirements on inputs and outputs, coupled with probabilistic remediation to steer generation toward compliance. The layer exposes the dual view of LLMs as semantic parsers and probabilistic black-box components. Contract satisfaction is probabilistic and semantic validation is operationally defined through programmer-specified conditions on well-typed data structures. More broadly, this work postulates that any two agents satisfying the same contracts are functionally equivalent with respect to those contracts.

Motion synthesis for diverse object categories holds great potential for 3D content creation but remains underexplored due to two key challenges: (1) the lack of comprehensive motion datasets that include a wide range of high-quality motions and annotations, and (2) the absence of methods capable of handling heterogeneous skeletal templates from diverse objects. To address these challenges, we contribute the following: First, we augment the Truebones Zoo dataset, a high-quality animal motion dataset covering over 70 species, by annotating it with detailed text descriptions, making it suitable for text-based motion synthesis. Second, we introduce rig augmentation techniques that generate diverse motion data while preserving consistent dynamics, enabling models to adapt to various skeletal configurations. Finally, we redesign existing motion diffusion models to dynamically adapt to arbitrary skeletal templates, enabling motion synthesis for a diverse range of objects with varying structures. Experiments show that our method learns to generate high-fidelity motions from textual descriptions for diverse and even unseen objects, setting a strong foundation for motion synthesis across diverse object categories and skeletal templates. Qualitative results are available on this link: t2m4lvo.github.io

Recent progress in Sign Language Translation (SLT) has focussed primarily on improving the representational capacity of large language models to incorporate Sign Language features. This work explores an alternative direction: enhancing the geometric properties of skeletal representations themselves. We propose Geo-Sign, a method that leverages the properties of hyperbolic geometry to model the hierarchical structure inherent in sign language kinematics. By projecting skeletal features derived from Spatio-Temporal Graph Convolutional Networks (ST-GCNs) into the Poincar\'e ball model, we aim to create more discriminative embeddings, particularly for fine-grained motions like finger articulations. We introduce a hyperbolic projection layer, a weighted Fr\'echet mean aggregation scheme, and a geometric contrastive loss operating directly in hyperbolic space. These components are integrated into an end-to-end translation framework as a regularisation function, to enhance the representations within the language model. This work demonstrates the potential of hyperbolic geometry to improve skeletal representations for Sign Language Translation, improving on SOTA RGB methods while preserving privacy and improving computational efficiency. Code available here: https://github.com/ed-fish/geo-sign.

Multiple agents may often conflict in an organization: for example, one coding agent changes an interface in a repository, but another continues to develop on the old version where existing tests become stale. A conversation can resolve the episode, but when the participants change, what makes the lesson continue to govern the team? We introduce Relic, which turns recurring collaboration failures into organization-owned, executable protocols. Members reflect on visible work, propose rules, and govern their adoption. Adopted protocols bind triggers, responsibilities, required evidence, and execution consequences to the runtime, while remaining open to revision and retirement. In one traced case, repeated integration friction produces an interface-review rule that governs later pull requests and is revised as work continues. Across 360 controlled runs over ten software workloads and three models, Relic raises complete-contract delivery from 14.06% to 19.76% (+5.71 percentage points) over a matched structured team without the protocol lifecycle, improving all four verified production endpoints in every model stratum. Under fresh-member transfer, behavioral correctness is 25.4% with no inherited protocol, 34.6% with the same rules provided as readable text, and 41.2% with executable bindings, a +6.5-point advantage over text alone. On the full CooperBench benchmark, after excluding broken benchmark pairs, Relic achieves 367/477 (76.9%), establishing the best reported result among peer-structured systems. On the fixed 48-pair same-model subset, Relic also exceeds Solo (29/48 vs. 26/48), reversing the coordination loss exhibited by the official peer baseline. Together, these results show how collaboration experience can become persistent organizational state that remains useful beyond the members who created it.

We propose Mesh4D, a feed-forward model for monocular 4D mesh reconstruction. Given a monocular video of a dynamic object, our model reconstructs the object's complete 3D shape and motion, represented as a deformation field. Our key contribution is a compact latent space that encodes the entire animation sequence in a single pass. This latent space is learned by an autoencoder that, during training, is guided by the skeletal structure of the training objects, providing strong priors on plausible deformations. Crucially, skeletal information is not required at inference time. The encoder employs spatio-temporal attention, yielding a more stable representation of the object's overall deformation. Building on this representation, we train a latent diffusion model that, conditioned on the input video and the mesh reconstructed from the first frame, predicts the full animation in one shot. We evaluate Mesh4D on reconstruction and novel view synthesis benchmarks, outperforming prior methods in recovering accurate 3D shape and deformation.

The conditional generation of 3D motion has emerged as a key research topic due to its wide applicability across robotics, AR/VR, gaming, and content creation. However, extending recent advances in text-driven human motion generation to the animal domain remains challenging due to two core limitations. First, animals exhibit highly diverse skeletal topologies, unlike the standard human structure, making unified modeling across species difficult and leading to inefficient per-species models. Second, existing animal motion datasets suffer from limited scale and annotation quality, constraining model performance. To address these challenges, we propose UniMo, a unified point cloud-based motion generation framework that bypasses topological discrepancies by converting parametric skeletons into unparametric representations, further enhanced by dynamic sampling that allocates more points to active joints. Additionally, we present UniML3D, a large-scale motion-language dataset spanning both human and animal categories, containing 145,907 motion sequences and 433,388 captions-over 102x larger than existing animal datasets. Our method achieves state-of-the-art results on UniML3D and three public benchmarks including HumanML3D, KIT-ML, and AnimalML3D, demonstrating the feasibility and effectiveness of unified human-animal motion generation. Website: https://steve-zeyu-zhang.github.io/UniMo.

Modern coding scaffolds turn LLMs into capable software agents, but their ability to follow scaffold-specified instructions remains under-examined, especially when constraints are heterogeneous and persist across interactions. To fill this gap, we introduce OctoBench, which benchmarks scaffold-aware instruction following in repository-grounded agentic coding. OctoBench includes 34 environments and 217 tasks instantiated under three scaffold types, and is paired with 7,098 objective checklist items. To disentangle solving the task from following the rules, we provide an automated observation-and-scoring toolkit that captures full trajectories and performs fine-grained checks. Experiments on eight representative models reveal a systematic gap between task-solving and scaffold-aware compliance, underscoring the need for training and evaluation that explicitly targets heterogeneous instruction following. We release the benchmark to support reproducible benchmarking and to accelerate the development of more scaffold-aware coding agents.

In this paper, we introduce a method for reconstructing 3D humans from a single image using a biomechanically accurate skeleton model. To achieve this, we train a transformer that takes an image as input and estimates the parameters of the model. Due to the lack of training data for this task, we build a pipeline to produce pseudo ground truth model parameters for single images and implement a training procedure that iteratively refines these pseudo labels. Compared to state-of-the-art methods for 3D human mesh recovery, our model achieves competitive performance on standard benchmarks, while it significantly outperforms them in settings with extreme 3D poses and viewpoints. Additionally, we show that previous reconstruction methods frequently violate joint angle limits, leading to unnatural rotations. In contrast, our approach leverages the biomechanically plausible degrees of freedom making more realistic joint rotation estimates. We validate our approach across multiple human pose estimation benchmarks. We make the code, models and data available at: https://isshikihugh.github.io/HSMR/

Traditional software relies on contracts -- APIs, type systems, assertions -- to specify and enforce correct behavior. AI agents, by contrast, operate on prompts and natural language instructions with no formal behavioral specification. This gap is the root cause of drift, governance failures, and frequent project failures in agentic AI deployments. We introduce Agent Behavioral Contracts (ABC), a formal framework that brings Design-by-Contract principles to autonomous AI agents. An ABC contract C = (P, I, G, R) specifies Preconditions, Invariants, Governance policies, and Recovery mechanisms as first-class, runtime-enforceable components. We define (p, delta, k)-satisfaction -- a probabilistic notion of contract compliance that accounts for LLM non-determinism and recovery -- and prove a Drift Bounds Theorem showing that contracts with recovery rate gamma > alpha (the natural drift rate) bound behavioral drift to D* = alpha/gamma in expectation, with Gaussian concentration in the stochastic setting. We establish sufficient conditions for safe contract composition in multi-agent chains and derive probabilistic degradation bounds. We implement ABC in AgentAssert, a runtime enforcement library, and evaluate on AgentContract-Bench, a benchmark of 200 scenarios across 7 models from 6 vendors. Results across 1,980 sessions show that contracted agents detect 5.2-6.8 soft violations per session that uncontracted baselines miss entirely (p < 0.0001, Cohen's d = 6.7-33.8), achieve 88-100% hard constraint compliance, and bound behavioral drift to D* < 0.27 across extended sessions, with 100% recovery for frontier models and 17-100% across all models, at overhead < 10 ms per action.

An LLM agent's capability depends not only on model weights but on its harness: prompts, tools, skills, and control flow. Self-improvement loops already edit harnesses, yet single-lineage search is path-dependent and local wins often regress other tasks. We introduce DarwinX, which treats self-evolution as selection over a population of harnesses with the model frozen: a preserve-and-extend contract admits only variants that extend coverage without regressing, an archive keeps alternative lineages for recombination, and failure-, teacher-, and self-derived evidence share one edit interface. Fitness comes from each benchmark's own verifier: no gold solutions, no hand-picked winners. Across four benchmarks that progressively separate the evolution signal from the test, one loop adds about 17 points on average: Terminal-Bench 2.1 rises +7.7 to 83.2% on a matched base and to the verified frontier at 84.7% on a stronger one; TerminalWorld's held-out split reaches 68.3%, ahead of every off-the-shelf agent; WebArena-Infinity real-task pass@1 rises from 43.5% to 93.0% audit-clean; and a Terminal-Bench 2.1 harness transfers unchanged to SWE-bench Verified. What evolves is general agent competence, not benchmark-specific patches, so it survives changes of task, verifier, and base model. A frozen model need not be a fixed agent: harness selection turns evaluation compute into durable capability.

Skeleton-based action recognition, which classifies human actions based on the coordinates of joints and their connectivity within skeleton data, is widely utilized in various scenarios. While Graph Convolutional Networks (GCNs) have been proposed for skeleton data represented as graphs, they suffer from limited receptive fields constrained by joint connectivity. To address this limitation, recent advancements have introduced transformer-based methods. However, capturing correlations between all joints in all frames requires substantial memory resources. To alleviate this, we propose a novel approach called Skeletal-Temporal Transformer (SkateFormer) that partitions joints and frames based on different types of skeletal-temporal relation (Skate-Type) and performs skeletal-temporal self-attention (Skate-MSA) within each partition. We categorize the key skeletal-temporal relations for action recognition into a total of four distinct types. These types combine (i) two skeletal relation types based on physically neighboring and distant joints, and (ii) two temporal relation types based on neighboring and distant frames. Through this partition-specific attention strategy, our SkateFormer can selectively focus on key joints and frames crucial for action recognition in an action-adaptive manner with efficient computation. Extensive experiments on various benchmark datasets validate that our SkateFormer outperforms recent state-of-the-art methods.

Current AI agent frameworks commit early to a single interaction protocol, a fixed tool integration strategy, and static user models, limiting their deployment across diverse interaction paradigms. To address these constraints, we introduce STEM Agent (Self-adapting, Tool-enabled, Extensible, Multi-agent), a modular architecture inspired by biological pluripotency in which an undifferentiated agent core differentiates into specialized protocol handlers, tool bindings, and memory subsystems that compose into a fully functioning AI system. The framework unifies five interoperability protocols (A2A, AG-UI, A2UI, UCP, and AP2) behind a single gateway, introduces a Caller Profiler that continuously learns user preferences across more than twenty behavioral dimensions, externalizes all domain capabilities through the Model Context Protocol (MCP), and implements a biologically inspired skills acquisition system in which recurring interaction patterns crystallize into reusable agent skills through a maturation lifecycle analogous to cell differentiation. Complementing these capabilities, the memory system incorporates consolidation mechanisms, including episodic pruning, semantic deduplication, and pattern extraction, designed for sub-linear growth under sustained interaction. A comprehensive 413-test suite validates protocol handler behavior and component integration across all five architectural layers, completing in under three seconds.

Parametric 3D human models such as SMPL have driven significant advances in human pose and shape estimation, yet their simplified kinematics limit biomechanical realism. The recently proposed SKEL model addresses this limitation by re-rigging SMPL with an anatomically accurate skeleton. However, estimating SKEL parameters directly remains challenging due to limited training data, perspective ambiguities, and the inherent complexity of human articulation. We introduce SKEL-CF, a coarse-to-fine framework for SKEL parameter estimation. SKEL-CF employs a transformer-based encoder-decoder architecture, where the encoder predicts coarse camera and SKEL parameters, and the decoder progressively refines them in successive layers. To ensure anatomically consistent supervision, we convert the existing SMPL-based dataset 4DHuman into a SKEL-aligned version, 4DHuman-SKEL, providing high-quality training data for SKEL estimation. In addition, to mitigate depth and scale ambiguities, we explicitly incorporate camera modeling into the SKEL-CF pipeline and demonstrate its importance across diverse viewpoints. Extensive experiments validate the effectiveness of the proposed design. On the challenging MOYO dataset, SKEL-CF achieves 85.0 MPJPE / 51.4 PA-MPJPE, significantly outperforming the previous SKEL-based state-of-the-art HSMR (104.5 / 79.6). These results establish SKEL-CF as a scalable and anatomically faithful framework for human motion analysis, bridging the gap between computer vision and biomechanics. Our implementation is available on the project page: https://pokerman8.github.io/SKEL-CF/.

Parallel coding agents can independently produce locally valid changes while still interfering at integration time, expanding beyond planned scope, or relying on premises invalidated by concurrent work. Existing responses emphasize communication, isolated workspaces, late merge-time repair, continuous supervision, or post-hoc runtime recovery. This paper presents Claim Plane, a model-agnostic coordination architecture that treats concurrent software change as a pre-write admission problem. Before implementation, each worker declares a versioned ChangeIntent containing an exact base commit, typed resources, dependencies, and operations marked as committed or contingent. A deterministic control plane atomically admits compatible intents, constrains same-file parallelism to declared regions, serializes unresolved overlap, tracks dependency invalidation, and fails closed on ambiguous authority. During execution, a contingent mutation does not reserve write ownership initially; the first attempted mutation triggers atomic scope promotion and re-admission against the current active set. Brokered execution binds capabilities to intent versions, leases, OS-level worktree locks, monotonic fencing tokens, and Git-tree provenance, while integration verifies immutable patches and evidence. A preliminary six-pair CooperBench mechanism check is reported only as feasibility evidence: static Claim Plane achieved 6/6 pair passes with full serialization, while dynamic scope retained parallel admission on half of the pairs, performed seven successful scope promotions, and failed closed on two undeclared mutations. The sample is intentionally too small for comparative claims. We argue that separating probabilistic planning from deterministic authority provides a foundation for a future learned semantic-dependency model and frontier-model escalation only on unresolved cases.

Synthesizing physics-grounded 3D assets is a critical bottleneck for interactive virtual worlds and embodied AI. Existing methods predominantly focus on static geometry, overlooking the functional properties essential for interaction. We propose that interactive asset generation must be rooted in functional logic and hierarchical physics. To bridge this gap, we introduce PhysForge, a decoupled two-stage framework supported by PhysDB, a large-scale dataset of 150,000 assets with four-tier physical annotations. First, a VLM acts as a "physical architect" to plan a "Hierarchical Physical Blueprint" defining material, functional, and kinematic constraints. Second, a physics-grounded diffusion model realizes this blueprint by synthesizing high-fidelity geometry alongside precise kinematic parameters via a novel KineVoxel Injection (KVI) mechanism. Experiments demonstrate that PhysForge produces functionally plausible, simulation-ready assets, providing a robust data engine for interactive 3D content and embodied agents.

3D characters are essential to modern creative industries, but making them animatable often demands extensive manual work in tasks like rigging and skinning. Existing automatic rigging tools face several limitations, including the necessity for manual annotations, rigid skeleton topologies, and limited generalization across diverse shapes and poses. An alternative approach is to generate animatable avatars pre-bound to a rigged template mesh. However, this method often lacks flexibility and is typically limited to realistic human shapes. To address these issues, we present Make-It-Animatable, a novel data-driven method to make any 3D humanoid model ready for character animation in less than one second, regardless of its shapes and poses. Our unified framework generates high-quality blend weights, bones, and pose transformations. By incorporating a particle-based shape autoencoder, our approach supports various 3D representations, including meshes and 3D Gaussian splats. Additionally, we employ a coarse-to-fine representation and a structure-aware modeling strategy to ensure both accuracy and robustness, even for characters with non-standard skeleton structures. We conducted extensive experiments to validate our framework's effectiveness. Compared to existing methods, our approach demonstrates significant improvements in both quality and speed.

Learning-based simulation of multi-object rigid-body dynamics remains difficult because contact is discontinuous and errors compound over long horizons. Most existing methods remain tied to mesh connectivity and vertex-level message passing, which limits their applicability to mesh-free inputs such as point clouds and leads to high computational cost. Efficiently modeling high-fidelity rigid-body dynamics from mesh-free representations, therefore, remains challenging. We introduce RigidFormer, an object-centric Transformer-based model that learns mesh-free rigid-body dynamics with controllable integration step sizes. RigidFormer reasons at the object level and advances each object through compact anchors; Anchor-Vertex Pooling enriches these anchors with local vertex features, retaining contact-relevant geometry without dense vertex-level interaction. We propose Anchor-based RoPE to inject anchor geometry into attention while respecting the unordered nature of objects and anchors: object-token processing is permutation-equivariant, and the mean-pooled anchor descriptor is invariant to anchor reindexing while preserving shape extent. RigidFormer further enforces rigidity by projecting updates onto the rigid-body manifold using differentiable Kabsch alignment. On standard benchmarks, RigidFormer outperforms or matches mesh-based baselines using point inputs, runs faster, generalizes to unseen point resolutions and across datasets, and scales to 200+ objects; we also show a preliminary extension to command-conditioned articulated bodies by treating body parts as interacting object-level components.

While current skeleton action recognition models demonstrate impressive performance on large-scale datasets, their adaptation to new application scenarios remains challenging. These challenges are particularly pronounced when facing new action categories, diverse performers, and varied skeleton layouts, leading to significant performance degeneration. Additionally, the high cost and difficulty of collecting skeleton data make large-scale data collection impractical. This paper studies one-shot and limited-scale learning settings to enable efficient adaptation with minimal data. Existing approaches often overlook the rich mutual information between labeled samples, resulting in sub-optimal performance in low-data scenarios. To boost the utility of labeled data, we identify the variability among performers and the commonality within each action as two key attributes. We present SkeletonX, a lightweight training pipeline that integrates seamlessly with existing GCN-based skeleton action recognizers, promoting effective training under limited labeled data. First, we propose a tailored sample pair construction strategy on two key attributes to form and aggregate sample pairs. Next, we develop a concise and effective feature aggregation module to process these pairs. Extensive experiments are conducted on NTU RGB+D, NTU RGB+D 120, and PKU-MMD with various GCN backbones, demonstrating that the pipeline effectively improves performance when trained from scratch with limited data. Moreover, it surpasses previous state-of-the-art methods in the one-shot setting, with only 1/10 of the parameters and much fewer FLOPs. The code and data are available at: https://github.com/zzysteve/SkeletonX

Modeling spinal motion is fundamental to understanding human biomechanics, yet remains underexplored in computer vision due to the spine's complex multi-joint kinematics and the lack of large-scale 3D annotations. We present a biomechanics-aware keypoint simulation framework that augments existing human pose datasets with anatomically consistent 3D spinal keypoints derived from musculoskeletal modeling. Using this framework, we create the first open dataset, named SIMSPINE, which provides sparse vertebra-level 3D spinal annotations for natural full-body motions in indoor multi-camera capture without external restraints. With 2.14 million frames, this enables data-driven learning of vertebral kinematics from subtle posture variations and bridges the gap between musculoskeletal simulation and computer vision. In addition, we release pretrained baselines covering fine-tuned 2D detectors, monocular 3D pose lifting models, and multi-view reconstruction pipelines, establishing a unified benchmark for biomechanically valid spine motion estimation. Specifically, our 2D spine baselines improve the state-of-the-art from 0.63 to 0.80 AUC in controlled environments, and from 0.91 to 0.93 AP for in-the-wild spine tracking. Together, the simulation framework and SIMSPINE dataset advance research in vision-based biomechanics, motion analysis, and digital human modeling by enabling reproducible, anatomically grounded 3D spine estimation under natural conditions.

LLM-based Lean proving systems increasingly organize a proof as a blueprint: a dependency graph of formal statements. We introduce BlueprintRepair, a repair interface that lets a model change this graph through ten schema-checked local operations. An operation names the node it edits, so the target theorem cannot be changed. Lean checks every applied change, and an accepted repair must declare every blueprint lemma its proof uses. We also construct BlueprintTrace, a benchmark of 142 controlled failures with complete accepted and rejected repair trajectories. We compare typed edits, exact source patches, and complete module rewrites under matched source, feedback, model, and budget, one episode per state and interface. With DeepSeek-V4-Flash, the three interfaces solve almost the same number of the benchmark's localized failures. Typed repair is the cheapest per solved state (patching is 1.30x as expensive, rewriting 2.06x), and within 10,000 completion tokens per task it reaches almost all of its final coverage, while both free-form interfaces are well behind. A second model, Qwen3.6-Flash, solves fewer states but keeps typed repair cheapest, puts it ahead on the proof-authoring states, and repeats the localized pattern.

The Contract Net Protocol (1980) introduced coordination through contracts in multi-agent systems. Modern agent protocols standardize connectivity and interoperability; yet, none provide formal, resource governance-normative mechanisms to bound how much agents may consume or how long they may operate. We introduce Agent Contracts, a formal framework that extends the contract metaphor from task allocation to resource-bounded execution. An Agent Contract unifies input/output specifications, multi-dimensional resource constraints, temporal boundaries, and success criteria into a coherent governance mechanism with explicit lifecycle semantics. For multi-agent coordination, we establish conservation laws ensuring delegated budgets respect parent constraints, enabling hierarchical coordination through contract delegation. Empirical validation across four experiments demonstrates 90% token reduction with 525x lower variance in iterative workflows, zero conservation violations in multi-agent delegation, and measurable quality-resource tradeoffs through contract modes. Agent Contracts provide formal foundations for predictable, auditable, and resource-bounded autonomous AI deployment.

Automated assembly of 3D fractures is essential in orthopedics, archaeology, and our daily life. This paper presents Jigsaw, a novel framework for assembling physically broken 3D objects from multiple pieces. Our approach leverages hierarchical features of global and local geometry to match and align the fracture surfaces. Our framework consists of four components: (1) front-end point feature extractor with attention layers, (2) surface segmentation to separate fracture and original parts, (3) multi-parts matching to find correspondences among fracture surface points, and (4) robust global alignment to recover the global poses of the pieces. We show how to jointly learn segmentation and matching and seamlessly integrate feature matching and rigidity constraints. We evaluate Jigsaw on the Breaking Bad dataset and achieve superior performance compared to state-of-the-art methods. Our method also generalizes well to diverse fracture modes, objects, and unseen instances. To the best of our knowledge, this is the first learning-based method designed specifically for 3D fracture assembly over multiple pieces. Our code is available at https://jiaxin-lu.github.io/Jigsaw/.

Articulated 3D reconstruction has valuable applications in various domains, yet it remains costly and demands intensive work from domain experts. Recent advancements in template-free learning methods show promising results with monocular videos. Nevertheless, these approaches necessitate a comprehensive coverage of all viewpoints of the subject in the input video, thus limiting their applicability to casually captured videos from online sources. In this work, we study articulated 3D shape reconstruction from a single and casually captured internet video, where the subject's view coverage is incomplete. We propose DreaMo that jointly performs shape reconstruction while solving the challenging low-coverage regions with view-conditioned diffusion prior and several tailored regularizations. In addition, we introduce a skeleton generation strategy to create human-interpretable skeletons from the learned neural bones and skinning weights. We conduct our study on a self-collected internet video collection characterized by incomplete view coverage. DreaMo shows promising quality in novel-view rendering, detailed articulated shape reconstruction, and skeleton generation. Extensive qualitative and quantitative studies validate the efficacy of each proposed component, and show existing methods are unable to solve correct geometry due to the incomplete view coverage.

Inspired by the success of volumetric 3D pose estimation, some recent human mesh estimators propose to estimate 3D skeletons as intermediate representations, from which, the dense 3D meshes are regressed by exploiting the mesh topology. However, body shape information is lost in extracting skeletons, leading to mediocre performance. The advanced motion capture systems solve the problem by placing dense physical markers on the body surface, which allows to extract realistic meshes from their non-rigid motions. However, they cannot be applied to wild images without markers. In this work, we present an intermediate representation, named virtual markers, which learns 64 landmark keypoints on the body surface based on the large-scale mocap data in a generative style, mimicking the effects of physical markers. The virtual markers can be accurately detected from wild images and can reconstruct the intact meshes with realistic shapes by simple interpolation. Our approach outperforms the state-of-the-art methods on three datasets. In particular, it surpasses the existing methods by a notable margin on the SURREAL dataset, which has diverse body shapes. Code is available at https://github.com/ShirleyMaxx/VirtualMarker.

AI co-scientists could accelerate computational research, but over a long-running study the workflow also has to stay inspectable, resumable and reproducible, which requires persistent computational state and provenance. Here we present OpenAI4S, an open-source scientific research agent built around the principle of Code as Action, Science as Sessions. OpenAI4S combines a persistent computing runtime with research-session management: orchestration is handled through structured tool calls, while scientific actions are represented as complete code cells executed in persistent Python and R kernels. An append-only Action Ledger, per-cell execution records, versioned artifacts, environment records, and workspace checkpoints preserve how results were produced and support session recovery, branching, and extension. Configurable sandboxing, permission controls, and code and trajectory screening provide complementary safeguards. We evaluate OpenAI4S on 36 research scenarios spanning retrosynthesis, molecular dynamics, protein binder design, protein mutation, catalyst screening, and mineral spectroscopy, measuring scientific task accuracy, workflow completeness, and reproducibility of the resulting repositories. OpenAI4S achieves an overall score of 7.83, compared with 5.7--6.4 for a general-purpose coding harness evaluated with three frontier models, with the largest gains on long-horizon and computation-intensive workflows. These results suggest that integrating persistent execution with session-level provenance can improve the reliability of AI-assisted scientific workflows. Environment specification and full rerunnability remain weak for every evaluated system, ours included, so reproducibility is still an open problem for scientific agents. The system is available under the MIT license at https://github.com/PKU-YuanGroup/OpenAI4S{github.com/PKU-YuanGroup/OpenAI4S}.

Addressing a structural-engineering request requires more than a single answer; it requires a chain of interdependent artifacts: interpreted requirements, a computable model, validation records, solver outputs, code-check records, and a final report. Evaluations centered on question answering or script generation rarely verify this complete evidence chain and may therefore reward fluent outputs even when the underlying engineering workflow is incomplete, internally inconsistent, or non-executable. To address this limitation, we present StructureClaw, an artifact-centered workbench in which LLM agents operate through governed engineering skills, typed tools, shared artifact state, and local analysis backends. We also introduce StructureClaw-Bench, an executable benchmark of 150 controlled scenarios spanning standard workflow execution, interactive robustness, and multimodal structural-model reconstruction. A scenario succeeds only when all required artifact- and execution-level assertions pass in a single run. Across ten agent-model configurations, each evaluated on the same 50 standard cases, the average Success Rate rises from 56.8% with the generic-skill baseline to 88.6% with the full automatic workflow. The interactive and multimodal evaluations identify two prominent remaining challenges: safe handling of invalid numerical inputs and fixture-consistent reconstruction of structural models. These findings show that artifact-centered evaluation can expose workflow-level failures that are difficult to identify from final responses alone, providing a more rigorous basis for evaluating and improving structural-engineering agents. The code and benchmark are available at https://github.com/structureclaw/structureclaw.

Agents are now used widely in the process of software development, but building production-ready software engineering agents is a complex task. Deploying software agents effectively requires flexibility in implementation and experimentation, reliable and secure execution, and interfaces for users to interact with agents. In this paper, we present the OpenHands Software Agent SDK, a toolkit for implementing software development agents that satisfy these desiderata. This toolkit is a complete architectural redesign of the agent components of the popular OpenHands framework for software development agents, which has 64k+ GitHub stars. To achieve flexibility, we design a simple interface for implementing agents that requires only a few lines of code in the default case, but is easily extensible to more complex, full-featured agents with features such as custom tools, memory management, and more. For security and reliability, it delivers seamless local-to-remote execution portability, integrated REST/WebSocket services. For interaction with human users, it can connect directly to a variety of interfaces, such as visual workspaces (VS Code, VNC, browser), command-line interfaces, and APIs. Compared with existing SDKs from OpenAI, Claude, and Google, OpenHands uniquely integrates native sandboxed execution, lifecycle control, model-agnostic multi-LLM routing, and built-in security analysis. Empirical results on SWE-Bench Verified and GAIA benchmarks demonstrate strong performance. Put together, these elements allow the OpenHands Software Agent SDK to provide a practical foundation for prototyping, unlocking new classes of custom applications, and reliably deploying agents at scale.

We present RigNet, an end-to-end automated method for producing animation rigs from input character models. Given an input 3D model representing an articulated character, RigNet predicts a skeleton that matches the animator expectations in joint placement and topology. It also estimates surface skin weights based on the predicted skeleton. Our method is based on a deep architecture that directly operates on the mesh representation without making assumptions on shape class and structure. The architecture is trained on a large and diverse collection of rigged models, including their mesh, skeletons and corresponding skin weights. Our evaluation is three-fold: we show better results than prior art when quantitatively compared to animator rigs; qualitatively we show that our rigs can be expressively posed and animated at multiple levels of detail; and finally, we evaluate the impact of various algorithm choices on our output rigs.

Organizations often develop and maintain portfolios of related applications: independently deployable codebases that share substantial domain logic, interface patterns, or operational conventions. As LLM coding agents are increasingly used to generate and maintain such software, a naive application-by-application workflow duplicates shared logic across codebases and allows prolonged agentic maintenance to accumulate verbosity, dead code, and structural erosion. We introduce the Super Library Agent problem, where an agent sequentially generates a portfolio of N related applications while maintaining a shared Super Library of reusable cross-application components. A minimal sequential scaffold can in principle extract shared code and migrate applications to the evolving library, but in practice suffers from low extraction recall and fragile dependency migration. We address these failures with candidate-guided extraction over code chunk summaries, pre-extraction codebase consolidation, and context-aware migration using extraction traces and call-graph information. Across WebGen-Bench and PaperBench, our method preserves application functionality while significantly reducing redundancy and token footprint (verbosity, token length) over zero-shot, and avoiding the structural erosion introduced by naive library construction, with additional reductions in LOC and MDL. Our code is available at https://github.com/sbigstar0310/super-library-agent.

Deepface generation has traditionally followed a task-driven paradigm, where distinct tasks (e.g., face transfer and hair transfer) are addressed by task-specific models. Nevertheless, this single-task setting severely limits model generalization and scalability. A unified model capable of solving multiple deepface generation tasks in a single pass represents a promising and practical direction, yet remains challenging due to data scarcity and cross-task conflicts arising from heterogeneous attribute transformations. To this end, we propose UniBioTransfer, the first unified framework capable of handling both conventional deepface tasks (e.g., face transfer and face reenactment) and shape-varying transformations (e.g., hair transfer and head transfer). Besides, UniBioTransfer naturally generalizes to unseen tasks, like lip, eye, and glasses transfer, with minimal fine-tuning. Generally, UniBioTransfer addresses data insufficiency in multi-task generation through a unified data construction strategy, including a swapping-based corruption mechanism designed for spatially dynamic attributes like hair. It further mitigates cross-task interference via an innovative BioMoE, a mixture-of-experts based model coupled with a novel two-stage training strategy that effectively disentangles task-specific knowledge. Extensive experiments demonstrate the effectiveness, generalization, and scalability of UniBioTransfer, outperforming both existing unified models and task-specific methods across a wide range of deepface generation tasks. Project page is at https://scy639.github.io/UniBioTransfer.github.io/

Controllable human image generation (HIG) has numerous real-life applications. State-of-the-art solutions, such as ControlNet and T2I-Adapter, introduce an additional learnable branch on top of the frozen pre-trained stable diffusion (SD) model, which can enforce various conditions, including skeleton guidance of HIG. While such a plug-and-play approach is appealing, the inevitable and uncertain conflicts between the original images produced from the frozen SD branch and the given condition incur significant challenges for the learnable branch, which essentially conducts image feature editing for condition enforcement. In this work, we propose a native skeleton-guided diffusion model for controllable HIG called HumanSD. Instead of performing image editing with dual-branch diffusion, we fine-tune the original SD model using a novel heatmap-guided denoising loss. This strategy effectively and efficiently strengthens the given skeleton condition during model training while mitigating the catastrophic forgetting effects. HumanSD is fine-tuned on the assembly of three large-scale human-centric datasets with text-image-pose information, two of which are established in this work. As shown in Figure 1, HumanSD outperforms ControlNet in terms of accurate pose control and image quality, particularly when the given skeleton guidance is sophisticated.

Existing hand-object interactions (HOI) methods are largely limited to rigid objects, while 4D reconstruction methods of articulated objects generally require pre-scanning the object or even multi-view videos. It remains an unexplored but significant challenge to reconstruct 4D human-articulated-object interactions from a single monocular RGB video. Fortunately, recent advancements in foundation models present a new opportunity to address this highly ill-posed problem. To this end, we introduce ArtHOI, an optimization-based framework that integrates and refines priors from multiple foundation models. Our key contribution is a suite of novel methodologies designed to resolve the inherent inaccuracies and physical unreality of these priors. In particular, we introduce an Adaptive Sampling Refinement (ASR) method to optimize object's metric scale and pose for grounding its normalized mesh in world space. Furthermore, we propose a Multimodal Large Language Model (MLLM) guided hand-object alignment method, utilizing contact reasoning information as constraints of hand-object mesh composition optimization. To facilitate a comprehensive evaluation, we also contribute two new datasets, ArtHOI-RGBD and ArtHOI-Wild. Extensive experiments validate the robustness and effectiveness of our ArtHOI across diverse objects and interactions. Project: https://arthoi-reconstruction.github.io.

We present visual action prompts, a unified action representation for action-to-video generation of complex high-DoF interactions while maintaining transferable visual dynamics across domains. Action-driven video generation faces a precision-generality trade-off: existing methods using text, primitive actions, or coarse masks offer generality but lack precision, while agent-centric action signals provide precision at the cost of cross-domain transferability. To balance action precision and dynamic transferability, we propose to "render" actions into precise visual prompts as domain-agnostic representations that preserve both geometric precision and cross-domain adaptability for complex actions; specifically, we choose visual skeletons for their generality and accessibility. We propose robust pipelines to construct skeletons from two interaction-rich data sources - human-object interactions (HOI) and dexterous robotic manipulation - enabling cross-domain training of action-driven generative models. By integrating visual skeletons into pretrained video generation models via lightweight fine-tuning, we enable precise action control of complex interaction while preserving the learning of cross-domain dynamics. Experiments on EgoVid, RT-1 and DROID demonstrate the effectiveness of our proposed approach. Project page: https://zju3dv.github.io/VAP/.

Radiographic assessment of lower-limb alignment (LLA) is important for predicting joint health and surgical outcomes in total knee arthroplasty. Traditional measurement methods are manual and time-consuming, while recent machine learning approaches typically rely on locating a fixed set of anatomical landmarks. This dependence limits flexibility and may require re-annotation when clinical definitions change. To address this, we propose an automated workflow using Implicit Neural Shape Functions (INSF). Rather than relying on explicit landmark coordinates, we encode the anatomy into a compact latent space and regress clinical alignment measurements directly from these latent codes. This architecture allows for rapid extendability to new tasks without altering the backbone representation. We trained our method on an internal dataset of 566 knee radiographs, each annotated with the outline of the femur and tibia. We evaluated it on both an internal test dataset of 50 patients and a separate external set of 402 preoperative cases from the MRKR dataset. Manual clinical measurements are available for these data, and the MRKR measurements will be made publicly accessible. Performance was comparable to state-of-the-art landmark-based methods and manual agreement, while offering a flexible shape representation that can be extended to additional measurement tasks.

Online 3D reconstruction models perform poorly on long videos. This happens because regressing poses relative to a fixed first-frame anchor forces extrapolation far beyond the training distribution. Small drifts accumulate and amplify into significant geometric collapse. However, we observe that per-frame depth remains stable throughout this failure. The backbone's local geometry remains intact; only the global pose head breaks down. Motivated by this decoupling, we introduce Scal3R. This approach reformulates online reconstruction as multi-reference relative pose querying. We use lightweight learnable tokens, which make up about ~1% of the parameters, and inject them into a completely frozen backbone via asymmetric attention. This setup queries poses relative to multiple past keyframes. An online pose-graph optimization system with loop closure suppresses long-range drift. Scal3R reaches convergence in 8 hours on a single GPU. It reduces the average ATE by over 60% on KITTI compared to the online baseline. It also achieves state-of-the-art performance across Virtual KITTI, Sintel, TUM-Dynamic, ScanNet, and 7-Scenes. Project page: https://linjohnss.github.io/scal3r/

Convolutional Neural Networks (CNNs) and Vision Transformers (ViTs) have led to significant progress in 2D body pose estimation. However, achieving a good balance between accuracy, efficiency, and robustness remains a challenge. For instance, CNNs are computationally efficient but struggle with long-range dependencies, while ViTs excel in capturing such dependencies but suffer from quadratic computational complexity. This paper proposes two ViT-based models for accurate, efficient, and robust 2D pose estimation. The first one, EViTPose, operates in a computationally efficient manner without sacrificing accuracy by utilizing learnable joint tokens to select and process a subset of the most important body patches, enabling us to control the trade-off between accuracy and efficiency by changing the number of patches to be processed. The second one, UniTransPose, while not allowing for the same level of direct control over the trade-off, efficiently handles multiple scales by combining (1) an efficient multi-scale transformer encoder that uses both local and global attention with (2) an efficient sub-pixel CNN decoder for better speed and accuracy. Moreover, by incorporating all joints from different benchmarks into a unified skeletal representation, we train robust methods that learn from multiple datasets simultaneously and perform well across a range of scenarios -- including pose variations, lighting conditions, and occlusions. Experiments on six benchmarks demonstrate that the proposed methods significantly outperform state-of-the-art methods while improving computational efficiency. EViTPose exhibits a significant decrease in computational complexity (30% to 44% less in GFLOPs) with a minimal drop of accuracy (0% to 3.5% less), and UniTransPose achieves accuracy improvements ranging from 0.9% to 43.8% across these benchmarks.

Large language models (LLMs) are increasingly asked not only to write static interfaces, but to construct executable interactive worlds from natural language. Browser-native 3D, commonly built with Three.js, is a natural next frontier: generated programs must integrate assets, obey spatial and physical constraints, and keep user-facing controls synchronized with hidden runtime state. Existing web-generation benchmarks and evaluators, however, largely observe only pixels or DOM nodes, while the mechanics of a Three.js world unfold inside an opaque <canvas>. We introduce WorldCoder-Bench, a benchmark for autonomous, physically grounded 3D world synthesis. WorldCoder-Bench contains 2,026 expert-curated tasks across Simulation, Rendering, and Application scenarios, with optional .glb assets and hidden behavioral contracts. We further propose StateProbe, an execution-based protocol that probes generated programs in a sandboxed browser and verifies hidden, mutation-hardened contracts over runtime states and transitions. Beyond verification coverage, we report Return on Automation and Time Efficiency Multiplier to measure correctness-adjusted cost and time savings. Across nine frontier models, the best system reaches only 27.8% verification coverage on WorldCoder-Core and 19.9% on WorldCoder-Robust, with failures dominated by state-schema drift and broken interaction chains rather than missing scene elements. Utility metrics further show that cheap or fast models can still provide substantial value on easier domains. WorldCoder-Bench is available at https://anonymous.4open.science/r/WorldCoder-Bench/.

Native 3D generators now recover impressive mesh geometry from a single image. However, a dense mesh stays soft where a machined object should be sharp, it carries no part decomposition, and it exposes no parameter a user could edit. To address this, we explore the paradigm of 3D shape as code, leveraging and scaling the coding ability of an LLM for 3D modeling. We introduce Procedura, a novel 3D modeling agent framework that writes an object as a procedural assembly, a parametric program whose named parts are joined by typed, machine-checkable mates. From a text prompt, the agent plans the object as an assembly graph and writes the program part by part, solving each placement from the mated frames rather than guessing it, and admitting a part only once compile, mate, and connectivity checks pass. A decoupled vision critic then refines the assembly one diagnosed fix at a time. Moreover, the same graph carries per-part materials and a simulator-validated articulation. We evaluate on P3D-Bench under its assembly judge, and with the same judge on MechBench-36, our hard-surface benchmark. On both, Procedura outperforms state-of-the-art native 3D generators and every prior 3D-code agent on judged quality, produces the sharpest edges of any method we evaluate, and is the only one whose output is an editable, part-structured program.

Powerful code agents can execute scripts, call tools, and manage files, yet many important applications remain accessible primarily through graphical user interfaces. We argue that screenshot-and-click is an inefficient interface for software-operating agents: screenshots are state-incomplete, and GUI actions are brittle, semantically weak, and poorly matched to long-horizon planning. We introduce ASIL (Agent-Software Interaction Layer), an agent-native interface that exposes software through structured JSON observations and code-executable semantic actions, realized through the deepest feasible access path for each application. We instantiate ASIL across 15 applications and a benchmark of 300 single-application and 80 multi-application tasks. ASIL reaches above 80 with closed models while executing fewer than five actions per task. Under a repaired runtime and a 50-step screenshot budget, the same tasks yield 6.6 and 26.6 strict success under screenshot-and-click control, rising to 15.0 and 53.3 on an easier OSWorld-comparable band. Against application-native interfaces on matched tasks, ASIL exceeds LibreOffice's UNO API by 28-38 strict points but only matches draw.io's MCP content contract. The structured modality also suits training: small-scale SFT raises Qwen3.5-2B from 58.0 to 72.1 and Qwen3.5-9B from 66.6 to 80.4, and resource-limited on-policy RL further raises them to 74.4 and 82.2.

Indirect prompt injection (IPI) is a major security threat to LLM-powered agents. Thus, a growing body of work have proposed a variety of defensive approaches against IPI. These can be grouped into three broad categories: 1) prompt-based (using prompting as a way to prevent agents from following malicious instructions), 2) detection-based (identifying and filtering malicious instructions), and 3) system-level (using systems insights, such as control and data isolation, for defense). However, commonly used benchmarks for evaluating defense, such as AgentDojo, are inherently static, generating a fixed distribution of IPI attacks. Consequently, static benchmarks do not usefully evaluate defense robustness to adaptive threats. We address this issue by developing AutoDojo, an adaptive extension of AgentDojo that optimizes IPI against a given defense. Using AutoDojo against state-of-the-art IPI defenses across three task suites and five target models, we make two key observations. First, many defenses offer only limited protection: a cheap, black-box adaptive attack using a frontier LLM to iteratively optimize the injection raises attack success rate (ASR) well above the level achieved by static injections against nearly all evaluated defenses. Against a filter that reduces static ASR to 0\%, AutoDojo recovers 28\% overall and 64\% on action-open tasks. Second, for prompt-level and filter-based defenses, ASR is substantially higher on action-open tasks -- where the user's request delegates the action itself to attacker-controlled content -- than on precisely specified tasks. This is a structural limit: on such tasks the injection can pose as ordinary data rather than an explicit instruction, bypassing defenses that rely on detecting instruction-like text. AutoDojo is publicly available at https://github.com/xhOwenMa/AutoDojo.

Directly learning to model 4D content, including shape, color and motion, is challenging. Existing methods depend on skeleton-based motion control and offer limited continuity in detail. To address this, we propose a novel framework that generates coherent 4D sequences with animation of 3D shapes under given conditions with dynamic evolution of shape and color over time through integrative latent mapping. We first employ an integrative latent unified representation to encode shape and color information of each detailed 3D geometry frame. The proposed skeleton-free latent 4D sequence joint representation allows us to leverage diffusion models in a low-dimensional space to control the generation of 4D sequences. Finally, temporally coherent 4D sequences are generated conforming well to the input images and text prompts. Extensive experiments on the ShapeNet, 3DBiCar and DeformingThings4D datasets for several tasks demonstrate that our method effectively learns to generate quality 3D shapes with color and 4D mesh animations, improving over the current state-of-the-art. Source code will be released.

Traditional agent development is split across prompt templates, tool schemas, callback code, and workflow graphs. We present NVIDIA Object-Oriented Agents (NOOA), a model-agnostic Python framework for building reliable AI agents. NOOA takes a simpler approach: an agent is a Python object. Its methods are the actions the model can take, fields are its state, docstrings are its prompts, and its type annotations are contracts. A method whose code body consists of "..." is completed at runtime by an LLM-driven agent loop, while methods with normal bodies remain standard deterministic Python. This gives developers and agents the same interface, so agent behavior can be tested, traced, refactored, and improved just like other software. This paper makes three contributions. (1) We present the agent-as-a-Python-object programming model and the design principles behind it. Where Python has existing abstractions, we adopt them directly. Agent-specific capabilities--context, events, state rendering, long-term memory, and validated LLM loops--are exposed through simple Pythonic APIs, so both developers and agents share one familiar programming model. (2) We identify six model-facing ideas that NOOA is, to our knowledge, the first to combine on a single surface: typed input/output, pass-by-reference over live objects, code as action, programmable loop engineering, explicit object state, and model-callable harness APIs for context and events. We find the community already converging on several of these ideas--often as experimental or partial features--and present the comparison to encourage further adoption. (3) We demonstrate that current models use this interface effectively, both in targeted capability tests and on agentic and reasoning benchmarks such as SWE-bench Verified and Terminal-Bench 2.0 and ARC-AGI-3.

Reconstructing dynamic articulated objects from a singular monocular video is challenging, requiring joint estimation of shape, motion, and camera parameters from limited views. Current methods typically demand extensive computational resources and training time, and require additional human annotations such as predefined parametric models, camera poses, and key points, limiting their generalizability. We propose Synergistic Shape and Skeleton Optimization (S3O), a novel two-phase method that forgoes these prerequisites and efficiently learns parametric models including visible shapes and underlying skeletons. Conventional strategies typically learn all parameters simultaneously, leading to interdependencies where a single incorrect prediction can result in significant errors. In contrast, S3O adopts a phased approach: it first focuses on learning coarse parametric models, then progresses to motion learning and detail addition. This method substantially lowers computational complexity and enhances robustness in reconstruction from limited viewpoints, all without requiring additional annotations. To address the current inadequacies in 3D reconstruction from monocular video benchmarks, we collected the PlanetZoo dataset. Our experimental evaluations on standard benchmarks and the PlanetZoo dataset affirm that S3O provides more accurate 3D reconstruction, and plausible skeletons, and reduces the training time by approximately 60% compared to the state-of-the-art, thus advancing the state of the art in dynamic object reconstruction.

Surface electromyography (EMG) is a non-invasive sensing modality used in several domains, including biomechanics, rehabilitation, prosthetic control, and emerging human-machine interaction paradigms. Despite decades of use, significant challenges remain in achieving robust generalization across subjects, recording systems, and acquisition protocols. To tackle these challenges, foundation models (FMs) are gaining traction when targeting end-to-end applications based on EMG signals. Yet, existing EMG FMs remain limited to single downstream tasks and lack deployability on embedded platforms. In this work, we present TinyMyo, a lightweight FM based on a Transformer encoder architecture. The model is pre-trained in a self-supervised manner on publicly available datasets and achieves high reconstruction fidelity with only 3.6M parameters. With minimal task-specific head adaptations, the same backbone is used to tackle multiple downstream tasks, leveraging datasets acquired from diverse sensing locations and hardware platforms. We demonstrate generalization across hand gesture classification, hand kinematic regression, speech production and recognition, with performance comparable to or surpassing the state of the art (SoA), and model size below 5M parameters. We achieve SoA results compared to previous FM-based works on the NinaPro DB5 (89.4pm0.16%), UCI-EMG (97.56pm0.32%), and EPN-612 (96.74pm0.09%) datasets. We report, to the best of our knowledge, the first deployment of an EMG FM on an ultra-low-power microcontroller (GAP9), achieving an average power envelope of 36.45mW. By open-sourcing the pre-trained and the downstream task architectures (https://github.com/pulp-bio/BioFoundation), we aim to provide a flexible resource that can accelerate future research and serve as a common foundation for the EMG community.

Vision-language verifiers and routers must distinguish errors repairable by more reasoning from those caused by visual evidence never reaching the language model. This distinction lacks ground truth because annotators see full-resolution images while models receive preprocessed tensors. We introduce AliasForge to create cases where the relevant fact is provably absent from the interface. Fixed-point resampling makes the pre-rounding resize an exact integer linear map that can send nonzero integer perturbations to zero. Hiding a label-flipping perturbation there produces images with opposite step-correctness labels but bit-identical interface states. Every verifier therefore has the same output law on both members, giving pair-balanced accuracy exactly one half and zero gain from language-side repair. We prove that every fixed-point downscaler has such null vectors and bound their smallest size at the most common ratios, which rules out an 8-bit fit whenever the bound exceeds 255. From the resize configuration alone, a lattice criterion supplies realizable collisions and certifies their absence within the specified construction family. It resolves all 20 screened configurations, 17 as constructible and 3 as non-constructible. We construct certified pairs across three architectures and certify four additional processors, with zero decision-logit gap on all 18 scored pairs and none of the 18 controls. The pairs also screen routers that waste computation on re-attention or further reasoning. On natural items, per-item routing headroom exists, but no tested interface-only router improves over stopping. Our fiber ceiling bounds the headroom recoverable from the interface. Code: https://github.com/KurbanIntelligenceLab/aliasforge.

Pose estimation has promised to impact healthcare by enabling more practical methods to quantify nuances of human movement and biomechanics. However, despite the inherent connection between pose estimation and biomechanics, these disciplines have largely remained disparate. For example, most current pose estimation benchmarks use metrics such as Mean Per Joint Position Error, Percentage of Correct Keypoints, or mean Average Precision to assess performance, without quantifying kinematic and physiological correctness - key aspects for biomechanics. To alleviate this challenge, we develop OpenCapBench to offer an easy-to-use unified benchmark to assess common tasks in human pose estimation, evaluated under physiological constraints. OpenCapBench computes consistent kinematic metrics through joints angles provided by an open-source musculoskeletal modeling software (OpenSim). Through OpenCapBench, we demonstrate that current pose estimation models use keypoints that are too sparse for accurate biomechanics analysis. To mitigate this challenge, we introduce SynthPose, a new approach that enables finetuning of pre-trained 2D human pose models to predict an arbitrarily denser set of keypoints for accurate kinematic analysis through the use of synthetic data. Incorporating such finetuning on synthetic data of prior models leads to twofold reduced joint angle errors. Moreover, OpenCapBench allows users to benchmark their own developed models on our clinically relevant cohort. Overall, OpenCapBench bridges the computer vision and biomechanics communities, aiming to drive simultaneous advances in both areas.

Detecting aligned 3D keypoints is essential under many scenarios such as object tracking, shape retrieval and robotics. However, it is generally hard to prepare a high-quality dataset for all types of objects due to the ambiguity of keypoint itself. Meanwhile, current unsupervised detectors are unable to generate aligned keypoints with good coverage. In this paper, we propose an unsupervised aligned keypoint detector, Skeleton Merger, which utilizes skeletons to reconstruct objects. It is based on an Autoencoder architecture. The encoder proposes keypoints and predicts activation strengths of edges between keypoints. The decoder performs uniform sampling on the skeleton and refines it into small point clouds with pointwise offsets. Then the activation strengths are applied and the sub-clouds are merged. Composite Chamfer Distance (CCD) is proposed as a distance between the input point cloud and the reconstruction composed of sub-clouds masked by activation strengths. We demonstrate that Skeleton Merger is capable of detecting semantically-rich salient keypoints with good alignment, and shows comparable performance to supervised methods on the KeypointNet dataset. It is also shown that the detector is robust to noise and subsampling. Our code is available at https://github.com/eliphatfs/SkeletonMerger.

Skeleton sequences can represent both individual actions and multi-entity interactions, encompassing human bodies, hands, objects, and robots. Existing approaches to recognize skeleton-based actions and interactions usually adopt a late fusion strategy, which expects individuals are independent and identically distributed to train a robust weight-shared entity encoder. However, observed entity bias in various skeletal data violates this assumption, leading to suboptimal optimization of backbone models that might produce wrong recognition results. This bias arises from the world coordinate system's initial configuration, where the choice of origin often creates bias in representation. To this end, we propose a Convex Hull Adaptive Shift based normalization method to reduce Entity bias (CHASE), improving performance across a variety of skeleton-based action and interaction recognition tasks. To adaptively apply plausible shifts to the input skeletons, we formulate a plug-and-play parameterized network that ensures the relocated world origin lies within the skeleton convex hull, which avoids non-convergence by limiting the search space. To further minimize entity bias, we incorporate an auxiliary objective that leverages pair-wise distribution distances to guide network optimization. To support both single- and multi-entity actions, we propose a sub-entity strategy that offers a consistent formulation for both scenarios. Moreover, CHASE demonstrates compatibility with various intra-skeleton modalities, such as bones and velocities, highlighting its adaptability. Essentially, our method works as a normalization approach to reduce entity bias, enabling subsequent classifiers to achieve improved recognition performance across diverse settings. Extensive experiments on 7 datasets verify our approach by seamlessly integrating with various backbones and significantly boosting their performance.

Reconstructing dynamic hand-object interactions from monocular videos is critical for dexterous manipulation data collection and creating realistic digital twins for robotics and VR. However, current methods face two prohibitive barriers: (1) reliance on neural rendering often yields fragmented, non-simulation-ready geometries under heavy occlusion, and (2) dependence on brittle Structure-from-Motion (SfM) initialization leads to frequent failures on in-the-wild footage. To overcome these limitations, we introduce AGILE, a robust framework that shifts the paradigm from reconstruction to agentic generation for interaction learning. First, we employ an agentic pipeline where a Vision-Language Model (VLM) guides a generative model to synthesize a complete, watertight object mesh with high-fidelity texture, independent of video occlusions. Second, bypassing fragile SfM entirely, we propose a robust anchor-and-track strategy. We initialize the object pose at a single interaction onset frame using a foundation model and propagate it temporally by leveraging the strong visual similarity between our generated asset and video observations. Finally, a contact-aware optimization integrates semantic, geometric, and interaction stability constraints to enforce physical plausibility. Extensive experiments on HO3D, DexYCB, and in-the-wild videos reveal that AGILE outperforms baselines in global geometric accuracy while demonstrating exceptional robustness on challenging sequences where prior art frequently collapses. By prioritizing physical validity, our method produces simulation-ready assets validated via real-to-sim retargeting for robotic applications.

General-purpose agents such as OpenClaw are increasingly used as autonomous tool users, but their coding ability is difficult to measure under SWE-bench: a generic agent does not by itself satisfy the clean Docker workspace, patch, and prediction contract required for scoring. We introduce Claw-SWE-Bench, a multilingual SWE-bench-style benchmark and adapter protocol that makes heterogeneous agent harnesses, or claws, comparable under fair settings including a fixed prompt, runtime budget, workspace contract, patch extraction procedure, and evaluator. The full benchmark contains 350 GitHub issue-resolution instances across 8 languages and 43 repositories, drawn from SWE-bench-Multilingual and SWE-bench-Verified-Mini after future-commit cleanup. We also release Claw-SWE-Bench Lite for faster validation, which is an 80-instance subset selected by a cost-aware, rank-aware procedure over 17 calibration columns. On the full benchmark, OpenClaw with a minimal direct-diff adapter scores only 19.1% Pass@1, whereas the full adapter reaches 73.4% with the same GLM 5.1 backbone, showing that adapter design is essential for enabling OpenClaw-style harnesses to perform coding tasks effectively. Across an OpenClaw times nine-model sweep and a five-claw times two-model sweep, model choice changes Pass@1 by 29.4 pp and harness choice by 27.4 pp under fixed models; systems with similar accuracy can differ substantially in total API cost. Claw-SWE-Bench therefore treats harness and cost accounting as first-class axes of SWE-style coding-agent evaluation, providing both a full benchmark and a low-cost reference set for reproducible comparison. The data is available at https://github.com/opensquilla/claw-swe-bench and https://huggingface.co/datasets/TokenRhythm/Claw-SWE-Bench.