Daily Papers

Induction heads provide a mechanistic account of in-context learning in sequential data, but existing theory largely assumes that the context relevant to a prediction forms a contiguous block. In multidimensional data, serialization breaks this assumption by scattering spatial neighbors across distant positions in the token sequence. We study how transformers overcome this routing problem in multidimensional stochastic and deterministic cellular automata, where each trajectory is generated by an unknown local rule and presented as a flattened sequence without an explicit coordinate-based spatial inductive bias. We introduce spatial induction heads, two-layer gather-and-match circuits in which the first layer reconstructs the relevant spatial neighborhood and the second matches the resulting configuration against earlier occurrences. We give two explicit realizations of the gather and show that the positional dimension required for spatial routing depends only on the local neighborhood and spatial dimension, not on grid volume or trajectory horizon. We further construct a matching layer which implements Bayesian counting. The end-to-end circuit can approximate the Bayesian posterior arbitrarily closely for stochastic rules and can predict exactly for deterministic rules. Empirically, trained two-layer transformers generalize to unseen rules in one and two dimensional settings, achieving near-perfect deterministic rollouts and less than 0.005 nats KL from the Bayes-optimal predictor on stochastic rules. Attention patterns and layerwise probes align with the predicted gather-and-match computation, providing mechanistic evidence for spatial induction in trained transformers.

We study the emergence of multi-step reasoning in deep Transformer language models through a geometric and statistical-physics lens. Treating the hidden-state trajectory as a flow on an implicit Riemannian manifold, we analyze the layerwise covariance spectrum of activations, where C^{(ell)}=E[h^{(ell)}h^{(ell)top}], and track deviations from a random-matrix bulk. Across model scales (1.5B--30B), we observe a sharp reduction in effective dimensionality consistent with a phase transition: an order parameter based on sparsity/localization, Ω(h)=1-|h|_1/(d|h|_2), exhibits a discontinuity near a critical normalized depth γ_capprox 0.42 in sufficiently large models. We formalize the forward pass as a discrete coarse-graining map and relate the appearance of stable "concept basins" to fixed points of this renormalization-like dynamics. The resulting low-entropy regime is characterized by a spectral tail collapse and by the formation of transient, reusable object-like structures in representation space, which we call Transient Class Objects (TCOs). We provide theoretical conditions connecting logical separability to spectral decay and validate the predicted signatures with layerwise probes on multiple open-weight model families.

Existing routers rely on semantic query features or handcrafted features, which often fail to capture model-specific failures or intrinsic task difficulty. We instead route using internal LLM activations, specifically the residual stream. Our key idea, Encoder-Target Decoupling, separates the model that produces the predictive signal (the Encoder) from the model whose correctness is being estimated (the Target), allowing open-weight encoders to predict the performance of closed-source target models. We evaluate layerwise geometric probes, finding that Fisher Separability (J) effectively identifies informative layers, supported by Effective Dimensionality (d_{eff}) diagnostics. We then utilize a SharedTrunkNet, a joint multi-output MLP that predicts simultaneous correctness probabilities across candidate models using concatenated prefill features. In our experiments, SharedTrunkNet consistently outperforms semantic baselines. At its best, SharedTrunkNet closes 45.58% of the gap between the strongest standalone model and the oracle while achieving 74.31% cost savings relative to the most expensive model. These results demonstrate that prefill activations provide a robust routing signal, establishing activation-based routing as a high-performance alternative to purely semantic selection.

Sophisticated instrumentation for AI systems might have indicators that signal misalignment from human values, not unlike a "check engine" light in cars. One such indicator of misalignment is deceptiveness in generated responses. Future AI instrumentation may have the ability to detect when an LLM generates deceptive responses while reasoning about seemingly plausible but incorrect answers to factual questions. In this work, we demonstrate that linear probes on LLMs internal activations can detect deception in their responses with extremely high accuracy. Our probes reach a maximum of greater than 90% accuracy in distinguishing between deceptive and non-deceptive arguments generated by llama and qwen models ranging from 1.5B to 14B parameters, including their DeepSeek-r1 finetuned variants. We observe that probes on smaller models (1.5B) achieve chance accuracy at detecting deception, while larger models (greater than 7B) reach 70-80%, with their reasoning counterparts exceeding 90%. The layer-wise probe accuracy follows a three-stage pattern across layers: near-random (50%) in early layers, peaking in middle layers, and slightly declining in later layers. Furthermore, using an iterative null space projection approach, we find multitudes of linear directions that encode deception, ranging from 20 in Qwen 3B to nearly 100 in DeepSeek 7B and Qwen 14B models.

Self-supervised geospatial foundation models (GeoFMs) learn transferable representations from remote sensing data, but their downstream behavior is difficult to characterize. We study six representative GeoFMs spanning joint-embedding, reconstruction, and multimodal pretraining families, and evaluate transfer across classification, regression, and segmentation benchmarks under different label availability and downstream pipelines. We find that model rankings change across tasks and adaptation settings. Layerwise probing shows that, in most cases, task-relevant information is more accessible in intermediate transformer blocks compared to final-layer embeddings, and that GeoFMs exhibit distinct depthwise profiles. In segmentation case studies on PASTIS and Sen1Floods11, downstream adaptation settings such as decoder design and fine-tuning can be as impactful as the choice of GeoFM, and standard dense-prediction heads may be poorly aligned with how GeoFMs organize information over depth. Finally, CKA analysis on case studies shows that fine-tuning does not rewrite GeoFMs uniformly across depth, and the strongest changes are localized to the first linear layer of the MLP in ViT blocks. These results help explain why GeoFM rankings shift across benchmarks and motivate more representation-aware evaluation and adaptation strategies.

Large language models(LLMs) excel at text generation and knowledge question-answering tasks, but they are prone to generating hallucinated content, severely limiting their application in high-risk domains. Current hallucination detection methods based on uncertainty estimation and external knowledge retrieval suffer from the limitation that they still produce erroneous content at high confidence levels and rely heavily on retrieval efficiency and knowledge coverage. In contrast, probe methods that leverage the model's hidden-layer states offer real-time and lightweight advantages. However, traditional linear probes struggle to capture nonlinear structures in deep semantic spaces.To overcome these limitations, we propose a neural network-based framework for token-level hallucination detection. By freezing language model parameters, we employ lightweight MLP probes to perform nonlinear modeling of high-level hidden states. A multi-objective joint loss function is designed to enhance detection stability and semantic disambiguity. Additionally, we establish a layer position-probe performance response model, using Bayesian optimization to automatically search for optimal probe insertion layers and achieve superior training results.Experimental results on LongFact, HealthBench, and TriviaQA demonstrate that MLP probes significantly outperform state-of-the-art methods in accuracy, recall, and detection capability under low false-positive conditions.

Probing studies what information is encoded in a frozen LLM's layer representations by training a lightweight predictor on top of them. Beyond analysis, probes are often used operationally in probe-then-steer pipelines: a learned concept vector is extracted from a probe and injected via additive activation steering by adding it to a layer representation during the forward pass. The effectiveness of this pipeline hinges on estimating concept vectors that are accurate, directionally stable under ablation, and inexpensive to obtain. Motivated by these desiderata, we propose RAPTOR (Ridge-Adaptive Logistic Probe), a simple L2-regularized logistic probe whose validation-tuned ridge strength yields concept vectors from normalized weights. Across extensive experiments on instruction-tuned LLMs and human-written concept datasets, RAPTOR matches or exceeds strong baselines in accuracy while achieving competitive directional stability and substantially lower training cost; these quantitative results are supported by qualitative downstream steering demonstrations. Finally, using the Convex Gaussian Min-max Theorem (CGMT), we provide a mechanistic characterization of ridge logistic regression in an idealized Gaussian teacher-student model in the high-dimensional few-shot regime, explaining how penalty strength mediates probe accuracy and concept-vector stability and yielding structural predictions that qualitatively align with trends observed on real LLM embeddings.

Neural network models have a reputation for being black boxes. We propose to monitor the features at every layer of a model and measure how suitable they are for classification. We use linear classifiers, which we refer to as "probes", trained entirely independently of the model itself. This helps us better understand the roles and dynamics of the intermediate layers. We demonstrate how this can be used to develop a better intuition about models and to diagnose potential problems. We apply this technique to the popular models Inception v3 and Resnet-50. Among other things, we observe experimentally that the linear separability of features increase monotonically along the depth of the model.

Hidden-state probes effectively detect LLM hallucinations, but the geometry of the signal remains poorly characterized, driving increasingly complex probe architectures. Across three 7B-scale models and three datasets in a paired-example paradigm, we find the signal overwhelmingly dominated by a single mean-shift component, and removing this direction collapses detection to chance. Shrinkage linear discriminant analysis closes about 73% of the gap between 1D and full-dimensional classifiers, so apparent architectural complexity largely reflects high-dimensional covariance estimation difficulty rather than exploitable non-linearity. A simple L2-regularized logistic regression (0.952 AUROC) bounds or outperforms twelve controlled architectural alternatives, and our multi-layer aggregation exceeds CLAP cross-layer attention probing under matched paradigm. Because the signal spans a contiguous layer band, LayerMix aggregates it to match oracle-layer performance without oracle access. Our claims characterize the geometry within the controlled paired-example paradigm. Our code is available at https://github.com/js-lee-AI/LayerMix.

Scanning probe techniques are popular, non-destructive ways to visualize the real space structure of Van der Waals moirés. The high lateral spatial resolution provided by these techniques enables extracting the moiré lattice vectors from a scanning probe image. We have found that the extracted values, while precise, are not necessarily accurate. Scan-to-scan variations in the behavior of the piezos which drive the scanning probe, and thermally-driven slow relative drift between probe and sample, produce systematic errors in the extraction of lattice vectors. In this Letter, we identify the errors and provide a protocol to correct for them. Applying this protocol to an ensemble of ten successive scans of near-magic-angle twisted bilayer graphene, we are able to reduce our errors in extracting lattice vectors to less than 1%. This translates to extracting twist angles with a statistical uncertainty less than 0.001° and uniaxial heterostrain with uncertainty on the order of 0.002%.

The number of publicly available models is rapidly increasing, yet most remain undocumented. Users looking for suitable models for their tasks must first determine what each model does. Training machine learning models to infer missing documentation directly from model weights is challenging, as these weights often contain significant variation unrelated to model functionality (denoted nuisance). Here, we identify a key property of real-world models: most public models belong to a small set of Model Trees, where all models within a tree are fine-tuned from a common ancestor (e.g., a foundation model). Importantly, we find that within each tree there is less nuisance variation between models. Concretely, while learning across Model Trees requires complex architectures, even a linear classifier trained on a single model layer often works within trees. While effective, these linear classifiers are computationally expensive, especially when dealing with larger models that have many parameters. To address this, we introduce Probing Experts (ProbeX), a theoretically motivated and lightweight method. Notably, ProbeX is the first probing method specifically designed to learn from the weights of a single hidden model layer. We demonstrate the effectiveness of ProbeX by predicting the categories in a model's training dataset based only on its weights. Excitingly, ProbeX can map the weights of Stable Diffusion into a weight-language embedding space, enabling model search via text, i.e., zero-shot model classification.

Linear probes trained on LLM activations are increasingly proposed as deception-detection metrics, yet report AUROC exceeding 0.96 on clean benchmarks while collapsing under distributional shift. This paper systematically pressure-tests probe-based metrics across the Gemma 3 model family (1B-27B parameters), diagnosing why they fail rather than merely documenting that they fail. We test four hypotheses about deception encoding: (1) single linear direction, (2) multi-dimensional subspace, (3) convex conic hull, (4) entropy proxy. Our design includes cross-domain transfer matrices, multi-dimensional probe analysis with permutation null baselines, entropy-residualization tests, and distractor evaluations across 8 stylistic shifts. We find that: (a) probes achieve near-perfect AUROC (>=0.998) on clean data but collapse under stylistic shifts; style-augmented probes recover near-perfect detection (mean AUROC 0.979-0.983) on unseen styles; (b) the single-direction hypothesis is rejected (k=1 captures only 0.61-0.80 AUROC), with cross-domain transfer failure confirmed as geometric rather than layer-mismatch-driven; (c) the entropy-proxy hypothesis is rejected (max |rho|=0.454, max Delta-AUROC after residualization=0.004); and (d) deception does not form a significant linear subspace (per-domain k*=0), yet multi-dimensional probes (k>=5) recover the signal through distributed sub-threshold features. Probe fragility reflects distributional narrowness rather than an architectural limitation: style-augmented probes recover near-perfect detection at both 4B and 27B, establishing that the inverse scaling pattern is a training-distribution artifact rather than a genuine scale-dependent phenomenon.

Most of the recent works on probing representations have focused on BERT, with the presumption that the findings might be similar to the other models. In this work, we extend the probing studies to two other models in the family, namely ELECTRA and XLNet, showing that variations in the pre-training objectives or architectural choices can result in different behaviors in encoding linguistic information in the representations. Most notably, we observe that ELECTRA tends to encode linguistic knowledge in the deeper layers, whereas XLNet instead concentrates that in the earlier layers. Also, the former model undergoes a slight change during fine-tuning, whereas the latter experiences significant adjustments. Moreover, we show that drawing conclusions based on the weight mixing evaluation strategy -- which is widely used in the context of layer-wise probing -- can be misleading given the norm disparity of the representations across different layers. Instead, we adopt an alternative information-theoretic probing with minimum description length, which has recently been proven to provide more reliable and informative results.

Parallel thinking has emerged as a promising paradigm for reasoning, yet it imposes significant computational burdens. Existing efficiency methods primarily rely on local, per-trajectory signals and lack principled mechanisms to exploit global dynamics across parallel branches. We introduce 2D probing, an interface that exposes the width-depth dynamics of parallel thinking by periodically eliciting intermediate answers from all branches. Our analysis reveals three key insights: non-monotonic scaling across width-depth allocations, heterogeneous reasoning branch lengths, and early stabilization of global consensus. Guided by these insights, we introduce Parallel-Probe, a training-free controller designed to optimize online parallel thinking. Parallel-Probe employs consensus-based early stopping to regulate reasoning depth and deviation-based branch pruning to dynamically adjust width. Extensive experiments across three benchmarks and multiple models demonstrate that Parallel-Probe establishes a superior Pareto frontier for test-time scaling. Compared to standard majority voting, it reduces sequential tokens by up to 35.8% and total token cost by over 25.8% while maintaining competitive accuracy.

This work examines whether activating latent subspaces in language models (LLMs) can steer scientific code generation toward a specific programming language. Five causal LLMs were first evaluated on scientific coding prompts to quantify their baseline bias among four programming languages. A static neuron-attribution method, perturbing the highest activated MLP weight for a C++ or CPP token, proved brittle and exhibited limited generalization across prompt styles and model scales. To address these limitations, a gradient-refined adaptive activation steering framework (G-ACT) was developed: per-prompt activation differences are clustered into a small set of steering directions, and lightweight per-layer probes are trained and refined online to select the appropriate steering vector. In LLaMA-3.2 3B, this approach reliably biases generation towards the CPP language by increasing the average probe classification accuracy by 15% and the early layers (0-6) improving the probe classification accuracy by 61.5% compared to the standard ACT framework. For LLaMA-3.3 70B, where attention-head signals become more diffuse, targeted injections at key layers still improve language selection. Although per-layer probing introduces a modest inference overhead, it remains practical by steering only a subset of layers and enables reproducible model behavior. These results demonstrate a scalable, interpretable and efficient mechanism for concept-level control for practical agentic systems.

As fine-tuning becomes impractical at scale, probing is emerging as the preferred evaluation protocol. However, standard linear probing can understate the capability of models whose pre-training optimizes local representations rather than an explicit global representation. This motivates attentive probing, an alternative that uses attention to selectively aggregate patch-level features. Despite growing adoption, attentive probing is still underexplored: existing approaches are often over-parameterized and computationally inefficient. In this work, we revisit attentive probing through the lens of the accuracy vs. parameter-efficiency trade-off. We present the first comprehensive study of existing methods, analyzing their design choices and benchmarking their performance. Building on these insights, we propose efficient probing (EP), a lightweight yet effective multi-query cross-attention mechanism that eliminates redundant projections and reduces the number of trainable parameters. Across multiple benchmarks and pre-training paradigms, EP consistently outperforms linear probing and previous attentive probing methods, and remains effective when combined with parameter-efficient fine-tuning. Beyond evaluation, our analysis uncovers emerging properties of EP, including complementary attention maps, which open new directions for leveraging probing beyond protocol design. Project page: https://vrg.fel.cvut.cz/ep/.

Text-to-image (T2I) diffusion models lack an efficient mechanism for early quality assessment, leading to costly trial-and-error in multi-generation scenarios such as prompt iteration, agent-based generation, and flow-grpo. We reveal a strong correlation between early diffusion cross-attention distributions and final image quality. Based on this finding, we introduce Diffusion Probe, a framework that leverages internal cross-attention maps as predictive signals. We design a lightweight predictor that maps statistical properties of early-stage cross-attention extracted from initial denoising steps to the final image's overall quality. This enables accurate forecasting of image quality across diverse evaluation metrics long before full synthesis is complete. We validate Diffusion Probe across a wide range of settings. On multiple T2I models, across early denoising windows, resolutions, and quality metrics, it achieves strong correlation (PCC > 0.7) and high classification performance (AUC-ROC > 0.9). Its reliability translates into practical gains. By enabling early quality-aware decisions in workflows such as prompt optimization, seed selection, and accelerated RL training, the probe supports more targeted sampling and avoids computation on low-potential generations. This reduces computational overhead while improving final output quality.Diffusion Probe is model-agnostic, efficient, and broadly applicable, offering a practical solution for improving T2I generation efficiency through early quality prediction.

Linear probes are a promising approach for monitoring AI systems for deceptive behaviour. Previous work has shown that a linear classifier trained on a contrastive instruction pair and a simple dataset can achieve good performance. However, these probes exhibit notable failures even in straightforward scenarios, including spurious correlations and false positives on non-deceptive responses. In this paper, we identify the importance of the instruction pair used during training. Furthermore, we show that targeting specific deceptive behaviors through a human-interpretable taxonomy of deception leads to improved results on evaluation datasets. Our findings reveal that instruction pairs capture deceptive intent rather than content-specific patterns, explaining why prompt choice dominates probe performance (70.6% of variance). Given the heterogeneity of deception types across datasets, we conclude that organizations should design specialized probes targeting their specific threat models rather than seeking a universal deception detector.

Frontier language model capabilities are improving rapidly. We thus need stronger mitigations against bad actors misusing increasingly powerful systems. Prior work has shown that activation probes may be a promising misuse mitigation technique, but we identify a key remaining challenge: probes fail to generalize under important production distribution shifts. In particular, we find that the shift from short-context to long-context inputs is difficult for existing probe architectures. We propose several new probe architecture that handle this long-context distribution shift. We evaluate these probes in the cyber-offensive domain, testing their robustness against various production-relevant shifts, including multi-turn conversations, static jailbreaks, and adaptive red teaming. Our results demonstrate that while multimax addresses context length, a combination of architecture choice and training on diverse distributions is required for broad generalization. Additionally, we show that pairing probes with prompted classifiers achieves optimal accuracy at a low cost due to the computational efficiency of probes. These findings have informed the successful deployment of misuse mitigation probes in user-facing instances of Gemini, Google's frontier language model. Finally, we find early positive results using AlphaEvolve to automate improvements in both probe architecture search and adaptive red teaming, showing that automating some AI safety research is already possible.

Tunneling spectroscopy is widely used to examine the subgap spectra in semiconductor-superconductor nanostructures when searching for Majorana zero modes (MZMs). Typically, semiconductor sections controlled by local gates at the ends of hybrids serve as tunnel barriers. Besides detecting states only at the hybrid ends, such gate-defined tunnel probes can cause the formation of non-topological subgap states that mimic MZMs. Here, we develop an alternative type of tunnel probes to overcome these limitations. After the growth of an InSb-Al hybrid nanowire, a precisely controlled in-situ oxidation of the Al shell is performed to yield a nm-thick Al oxide layer. In such thin isolating layer, tunnel probes can be arbitrarily defined at any position along the hybrid nanowire by shadow-wall angle-deposition of metallic leads. This allows us to make multiple tunnel probes along single nanowire hybrids and to successfully identify Andreev bound states (ABSs) of various spatial extension residing along the hybrids.

Next-generation nano and quantum devices have increasingly complex 3D structure. As the dimensions of these devices shrink to the nanoscale, their performance is often governed by interface quality or precise chemical or dopant composition. Here we present the first phase-sensitive extreme ultraviolet imaging reflectometer. It combines the excellent phase stability of coherent high-harmonic sources, the unique chemical- and phase-sensitivity of extreme ultraviolet reflectometry, and state-of-the-art ptychography imaging algorithms. This tabletop microscope can non-destructively probe surface topography, layer thicknesses, and interface quality, as well as dopant concentrations and profiles. High-fidelity imaging was achieved by implementing variable-angle ptychographic imaging, by using total variation regularization to mitigate noise and artifacts in the reconstructed image, and by using a high-brightness, high-harmonic source with excellent intensity and wavefront stability. We validate our measurements through multiscale, multimodal imaging to show that this technique has unique advantages compared with other techniques based on electron and scanning-probe microscopies.

Mechanistic interpretability aims to understand neural networks by identifying which learned features mediate specific behaviors. Attribution graphs reveal these feature pathways, but interpreting them requires extensive manual analysis -- a single prompt can take approximately 2 hours for an experienced circuit tracer. We present probe prompting, an automated pipeline that transforms attribution graphs into compact, interpretable subgraphs built from concept-aligned supernodes. Starting from a seed prompt and target logit, we select high-influence features, generate concept-targeted yet context-varying probes, and group features by cross-prompt activation signatures into Semantic, Relationship, and Say-X categories using transparent decision rules. Across five prompts including classic "capitals" circuits, probe-prompted subgraphs preserve high explanatory coverage while compressing complexity (Completeness 0.83, mean across circuits; Replacement 0.54). Compared to geometric clustering baselines, concept-aligned groups exhibit higher behavioral coherence: 2.3x higher peak-token consistency (0.425 vs 0.183) and 5.8x higher activation-pattern similarity (0.762 vs 0.130), despite lower geometric compactness. Entity-swap tests reveal a layerwise hierarchy: early-layer features transfer robustly (64% transfer rate, mean layer 6.3), while late-layer Say-X features specialize for output promotion (mean layer 16.4), supporting a backbone-and-specialization view of transformer computation. We release code (https://github.com/peppinob-ol/attribution-graph-probing), an interactive demo (https://huggingface.co/spaces/Peppinob/attribution-graph-probing), and minimal artifacts enabling immediate reproduction and community adoption.

Foundation Models (FMs) have recently redefined the state-of-the-art in histopathology by providing robust representations for whole-slide image (WSI) analysis. However, selecting the optimal foundation model (FM) for a specific clinical cohort currently requires multiple preprocessing steps, followed by computationally expensive feature extraction and the training of a Multiple Instance Learning (MIL) aggregator for every model. In this work, we investigate whether efficient tile-level linear probing can serve as a reliable proxy for slide-level performance, reducing the need to run full slide-level pipelines for every candidate encoder. We benchmark 19 state-of-the-art FMs on 42 slide-level and 16 tile-level tasks, comparing tile probing metrics against slide-level outcomes using ABMIL and Mean Pooling aggregations. We observe a high correlation between tile and slide performance across varying task difficulties, indicating that encoder representation quality is the primary determinant of WSI success. Sensitivity analyses show that transferability is stable across models and is more influenced by cohort sizes and numbers of tiles per slide than by average task difficulty. We also measure the agreement in best performing models between tile and slide-level tasks, showing tile benchmarks reliably shortlist strong candidates. Overall, our study indicates that tile-level benchmarking provides an efficient and practical first step for narrowing down candidate models, while slide-level evaluation remains essential for final validation on clinical tasks.

Long-horizon agents depend on context management: systems compress, summarize, and evict old tokens so tasks can continue beyond finite windows. That is safe only when dropped information is no longer needed or has been internalized. Plans are the stress case: they are written early, used for many steps, and first to be evicted. We introduce replay pairing, a diagnostic that runs the same trajectory with and without the plan in history and measures hidden-state cosine distance. On Llama-3.1-70B, plan signal spikes to 0.453 one step after the plan, then falls 4.1x in a single action-observation step; HotpotQA falls 12.4x. This is evidence that standard LLM agents do not carry plans forward as persistent state, and instead depend on the plan remaining in context. A layer-L32 probe detects this decay as a diagnostic, not as proof that it reads plan content itself. Reasoning models add a measurement confound: their `<think>` traces re-derive plan content, so standard stripping leaves plan evidence in the stripped condition. We name this the reasoning-trace confound and fix it with strict stripping, which removes prior `<think>` blocks from the stripped run only. It recovers +163% of the step+1 signal in-sample and +153% held out, while not meaningfully changing non-reasoning Llama (+4.8%). On DeepSeek-R1-Distill-Llama-70B, a Llama-trained probe transfers at AUROC 0.748 (p=6e-4), while R1-specific probes reach 1.000, suggesting R1 encodes plan signal in a different hidden-state direction. Finally, a compression stress test shows the practical cost: naive plan eviction cuts ALFWorld success by 34.7pp, while probe-gated re-surfacing does not recover it. The contribution is a measurement and stress-test framework showing that agent-critical information can be context-resident rather than persistent. Context management is load bearing, but plan protection alone is not enough.

AI models might use deceptive strategies as part of scheming or misaligned behaviour. Monitoring outputs alone is insufficient, since the AI might produce seemingly benign outputs while their internal reasoning is misaligned. We thus evaluate if linear probes can robustly detect deception by monitoring model activations. We test two probe-training datasets, one with contrasting instructions to be honest or deceptive (following Zou et al., 2023) and one of responses to simple roleplaying scenarios. We test whether these probes generalize to realistic settings where Llama-3.3-70B-Instruct behaves deceptively, such as concealing insider trading (Scheurer et al., 2023) and purposely underperforming on safety evaluations (Benton et al., 2024). We find that our probe distinguishes honest and deceptive responses with AUROCs between 0.96 and 0.999 on our evaluation datasets. If we set the decision threshold to have a 1% false positive rate on chat data not related to deception, our probe catches 95-99% of the deceptive responses. Overall we think white-box probes are promising for future monitoring systems, but current performance is insufficient as a robust defence against deception. Our probes' outputs can be viewed at data.apolloresearch.ai/dd and our code at github.com/ApolloResearch/deception-detection.

Prior work uses linear probes on benchmark prompts as evidence of evaluation awareness in large language models. Because evaluation context is typically entangled with benchmark format and genre, it is unclear whether probe-based signals reflect context or surface structure. We test whether these signals persist under partial control of prompt format using a controlled 2x2 dataset and diagnostic rewrites. We find that probes primarily track benchmark-canonical structure and fail to generalize to free-form prompts independent of linguistic style. Thus, standard probe-based methodologies do not reliably disentangle evaluation context from structural artifacts, limiting the evidential strength of existing results.

Probing is widely adopted in computer vision to faithfully evaluate self-supervised learning (SSL) embeddings, as finetuning may misrepresent their inherent quality. In contrast, audio SSL models still rely on finetuning because simple probing fails to unlock their full potential and alters their rankings when competing on AudioSet. Hence, a robust and efficient probing mechanism is required to guide the trajectory of audio SSL towards reliable and reproducible methods. We introduce Convex Gated Probing (CGP), a prototype-based method that significantly closes the gap between finetuning and probing in audio. CGP efficiently utilizes all frozen layers via a gating mechanism and exposes the location of latent task-relevant information. Guided by CGP as a reliable post-hoc evaluation probe, we rework the entire SSL pipeline of current best performing audio models that use legacy implementations of prior SSL methods. By refining data preprocessing, model architecture, and pretraining recipe, we introduce Better Audio Transformer (BAT), and establish new SOTA on audio benchmarks.

Given that visual foundation models (VFMs) are trained on extensive datasets but often limited to 2D images, a natural question arises: how well do they understand the 3D world? With the differences in architecture and training protocols (i.e., objectives, proxy tasks), a unified framework to fairly and comprehensively probe their 3D awareness is urgently needed. Existing works on 3D probing suggest single-view 2.5D estimation (e.g., depth and normal) or two-view sparse 2D correspondence (e.g., matching and tracking). Unfortunately, these tasks ignore texture awareness, and require 3D data as ground-truth, which limits the scale and diversity of their evaluation set. To address these issues, we introduce Feat2GS, which readout 3D Gaussians attributes from VFM features extracted from unposed images. This allows us to probe 3D awareness for geometry and texture via novel view synthesis, without requiring 3D data. Additionally, the disentanglement of 3DGS parameters - geometry (x, alpha, Sigma) and texture (c) - enables separate analysis of texture and geometry awareness. Under Feat2GS, we conduct extensive experiments to probe the 3D awareness of several VFMs, and investigate the ingredients that lead to a 3D aware VFM. Building on these findings, we develop several variants that achieve state-of-the-art across diverse datasets. This makes Feat2GS useful for probing VFMs, and as a simple-yet-effective baseline for novel-view synthesis. Code and data will be made available at https://fanegg.github.io/Feat2GS/.

Routing has emerged as a promising strategy for balancing performance and cost in large language model (LLM) systems that combine lightweight models with powerful but expensive large models. Recent studies show that probe routing, which predicts the correctness of a small model using its hidden states, provides an effective solution in text-only LLMs. However, we observe that these probes degrade substantially when applied to multimodal LLMs (MLLMs). Through empirical analysis, we find that the presence of visual inputs weakens the separability of correctness signals in hidden states, making them harder to extract using standard probe designs. To address this challenge, we introduce two complementary approaches for improving probe routing in MLLMs. First, we propose the Attention Probe, which aggregates hidden states from the preceding layer based on attention scores to recover distributed correctness signals. Second, we present the KL-Regularized LoRA Probe (ReLope), which inserts a lightweight LoRA adapter and applies a KL regularizer to learn routing-aware representations. Comprehensive experiments show that our methods consistently outperform baselines, suggesting that improving the quality of hidden states is key to effective routing in MLLMs. Our code is available at https://github.com/Spinozaaa/ReLope.

Linear probes are widely used in interpretability research and often compared by cosine similarity. The Mahalanobis cosine similarity (MCS) between two directions, which reweights the inner product by test data covariance, is a natural task-aware refinement. Ying et al. (2026) report that a probe's MCS to a reference probe trained on the out-of-distribution (OOD) data near-perfectly linearly predicts the probe's OOD AUROC (R^2 = 0.98). Here, we extend this empirical finding across models, layers, and concept domains, and prove this general phenomenon in closed form: For balanced classes whose projections are Gaussian, OOD AUROC and MCS to the reference probe are linear because both are sigmoid-shaped functions of the probe's signal-to-noise ratio (SNR) on the test data. The theory also predicts when this linearity fails, which we verify empirically. MCS offers a theoretically grounded and empirically effective alternative to Euclidean cosine similarity for comparing linear probes.

Joint Embedding Predictive Architectures (JEPAs) have reshaped self-supervised representation learning in vision. The recent LLM-JEPA ported JEPA to autoregressive language models but inherited two steep costs from the causal-attention substrate: it demands explicit multi-view data (e.g., text-code pairs), and it requires two gradient-carrying forward passes per step. We introduce DLLM-JEPA, which pairs JEPA with masked-diffusion language models to eliminate both costs at once. The bidirectional attention of diffusion models yields two semantically distinct views of the same input via different masking rates -- no explicit pairs needed -- and supports a single gradient-carrying forward pass, cutting training FLOPs by 33% relative to LLM-JEPA. DLLM-JEPA improves over diffusion-only fine-tuning in every (task, architecture) combination we evaluate: up to +18.7 pp on LLaDA-8B GSM8K and +11.4 pp on Dream-7B GSM8K, with consistent positive gains on Spider, NL-RX-SYNTH, and Django. Beyond accuracy, DLLM-JEPA exhibits a dual-win property: on LLaDA-8B with the Wide-t configuration, it simultaneously raises GSM8K accuracy (67.1 vs. 65.2, +1.8 pp), drives held-out Wikitext loss below the pre-trained base, and preserves MMLU accuracy at base level across three fine-tuning seeds -- whereas an L2-to-base parameter anchor matches baseline accuracy with no task gain. Layer-wise probing reveals the mechanism: a geometric-functional drift dissociation in which the fine-tuned backbone moves further from the pre-trained weights than the baseline yet forgets less on held-out Wikitext, with the amplification concentrated in middle transformer layers. The pattern appears on Dream-7B as well, indicating the phenomenon is not specific to a single backbone.

Deploying large language models in user-facing systems requires efficient output safety filtering. Existing approaches typically rely on a separate moderation model applied after generation, which doubles inference cost and only detects violations after generation completes. We observe that the signal needed for moderation is already present in the model hidden states. Based on this, we train lightweight token-level probes that operate directly on internal activations, producing per-token safety scores that can be aggregated for both offline evaluation and online intervention. The probe reuses activations from the generator and requires no additional forward pass, enabling sub millisecond per-token safety checks inside the decoding loop. A probe applied to a single mid layer recovers most decisions of a strong guard model, acting as a low cost surrogate optimized for latency rather than accuracy. In streaming settings, it can halt or modify unsafe outputs before they are fully generated, replacing end of sequence moderation with continuous token level monitoring. Compared to post hoc and streaming guard models, our method achieves orders of magnitude lower compute overhead with minimal latency cost. We also provide a practical deployment recipe, including layer selection, aggregation strategy, probing frequency, and triggering thresholds. Finally, we show that the probe linear component corresponds to a direction in residual space, enabling both detection and activation steering at negligible cost.

Previous work has showcased the intriguing capability of large language models (LLMs) in retrieving facts and processing context knowledge. However, only limited research exists on the layer-wise capability of LLMs to encode knowledge, which challenges our understanding of their internal mechanisms. In this paper, we devote the first attempt to investigate the layer-wise capability of LLMs through probing tasks. We leverage the powerful generative capability of ChatGPT to construct probing datasets, providing diverse and coherent evidence corresponding to various facts. We employ mathcal V-usable information as the validation metric to better reflect the capability in encoding context knowledge across different layers. Our experiments on conflicting and newly acquired knowledge show that LLMs: (1) prefer to encode more context knowledge in the upper layers; (2) primarily encode context knowledge within knowledge-related entity tokens at lower layers while progressively expanding more knowledge within other tokens at upper layers; and (3) gradually forget the earlier context knowledge retained within the intermediate layers when provided with irrelevant evidence. Code is publicly available at https://github.com/Jometeorie/probing_llama.

In this article, we use probing to investigate phenomena that occur during fine-tuning and knowledge distillation of a BERT-based natural language understanding (NLU) model. Our ultimate purpose was to use probing to better understand practical production problems and consequently to build better NLU models. We designed experiments to see how fine-tuning changes the linguistic capabilities of BERT, what the optimal size of the fine-tuning dataset is, and what amount of information is contained in a distilled NLU based on a tiny Transformer. The results of the experiments show that the probing paradigm in its current form is not well suited to answer such questions. Structural, Edge and Conditional probes do not take into account how easy it is to decode probed information. Consequently, we conclude that quantification of information decodability is critical for many practical applications of the probing paradigm.

Monitoring is an important aspect of safely deploying Large Language Models (LLMs). This paper examines activation probes for detecting ``high-stakes'' interactions -- where the text indicates that the interaction might lead to significant harm -- as a critical, yet underexplored, target for such monitoring. We evaluate several probe architectures trained on synthetic data, and find them to exhibit robust generalization to diverse, out-of-distribution, real-world data. Probes' performance is comparable to that of prompted or finetuned medium-sized LLM monitors, while offering computational savings of six orders-of-magnitude. These savings are enabled by reusing activations of the model that is being monitored. Our experiments also highlight the potential of building resource-aware hierarchical monitoring systems, where probes serve as an efficient initial filter and flag cases for more expensive downstream analysis. We release our novel synthetic dataset and the codebase at https://github.com/arrrlex/models-under-pressure.

In most Vision-Language models (VL), the understanding of the image structure is enabled by injecting the position information (PI) about objects in the image. In our case study of LXMERT, a state-of-the-art VL model, we probe the use of the PI in the representation and study its effect on Visual Question Answering. We show that the model is not capable of leveraging the PI for the image-text matching task on a challenge set where only position differs. Yet, our experiments with probing confirm that the PI is indeed present in the representation. We introduce two strategies to tackle this: (i) Positional Information Pre-training and (ii) Contrastive Learning on PI using Cross-Modality Matching. Doing so, the model can correctly classify if images with detailed PI statements match. Additionally to the 2D information from bounding boxes, we introduce the object's depth as new feature for a better object localization in the space. Even though we were able to improve the model properties as defined by our probes, it only has a negligible effect on the downstream performance. Our results thus highlight an important issue of multimodal modeling: the mere presence of information detectable by a probing classifier is not a guarantee that the information is available in a cross-modal setup.

Large Language Models exhibit paradoxical fragility in fundamental arithmetic, implying a disconnect between internal computation and discrete output. By analyzing the residual stream geometry during multi-operand addition, we identify the Iso-Raw-Sum Trajectory (IRST), a geometric structure where representations are anchored by semantic digits and modulated by continuous carry fibers. We propose the Noisy Quantization Model to explain this geometry, framing arithmetic errors as Geometric Slippages caused by internal neural noise pushing a continuous, latent Carry Potential across quantization thresholds. This geometric framework further elucidates Probe Versatility, explaining how lightweight probes can disentangle coexisting latent signals (such as ground truth versus hallucination) from a single activation vector. Finally, we validate these insights through a geometric consistency check method that effectively detects and corrects these quantization failures during inference. Our code is available at https://github.com/RL-MIND/Shape-of-Addition.

Vision-language models encode continuous geometry that their text pathway fails to express: a 6,000-parameter linear probe extracts hand joint angles at 6.1 degrees MAE from frozen features, while the best text output achieves only 20.0 degrees -- a 3.3x bottleneck. LoRA fine-tuning (r=16, 2,000 images) narrows this gap to 6.5 degrees, providing evidence for a pathway-training deficit rather than a representational one. Training objective determines accuracy more than architecture: five encoders spanning self-supervised, contrastive, and hybrid paradigms converge to statistically equivalent accuracy (R^2 approximately 0.55, TOST-equivalent at delta=0.03) despite sharing as little as CKA=0.41 representational similarity -- functional convergence without representational convergence. Autoregressive generation damages geometric fidelity, but the damage originates in the generation process, not in language alignment: Qwen2.5-VL's LLM layers actually improve probe accuracy over its raw vision encoder. Layer-wise analysis reveals a universal mid-network accuracy peak across all architectures, with attention heads in layers 18-22 carrying disproportionate geometric signal. These findings enable a single frozen backbone to function as a multi-task geometric sensor through lightweight probes, without fine-tuning or text generation.

Spectral positional encodings (PEs) for directed graphs face two obstacles: magnetic Laplacians require an O(n^3) Hermitian eigendecomposition per potential, and their complex eigenvectors are defined only up to unitary gauge, which prior work handles with basis-invariant architectures. We propose learnable spectral PEs of the form h_θ(A_q),R, where A_q is a normalized magnetic operator, h_θ a learnable scalar spectral response, and R a block of random probes. Because the PE is a matrix function of the operator, it is gauge-invariant by construction. We compute it in a Hermitian block Krylov subspace from sparse matrix--vector products only, prove that k = O(log(1/varepsilon)) block steps suffice uniformly over heat--resolvent response families, and give a covering-number argument for why low-dimensional structured families generalize where free per-eigenvalue weights overfit. On a directed SBM whose symmetrization is uninformative by construction, direction-blind PEs stay at chance while magnetic Krylov PEs converge to the exact-eigendecomposition oracle as the depth grows. The same probes yield gauge-invariant pairwise features with 1/s Monte-Carlo error, and the undirected q{=}0 case improves heterophilous benchmarks over no-PE and polynomial baselines.

Layer-wise mixed-precision quantization (LMPQ) enables effective compression under extreme low-bit settings by allocating higher precision to sensitive layers. However, existing methods typically treat all intra-layer weight modules uniformly and rely on a single numerical property when estimating sensitivity, overlooking their distinct operational roles and structural characteristics. To address this, we propose NSDS, a novel calibration-free LMPQ framework driven by Numerical and Structural Dual-Sensitivity. Specifically, it first mechanistically decomposes each layer into distinct operational roles and quantifies their sensitivity from both numerical and structural perspectives. These dual-aspect scores are then aggregated into a unified layer-wise metric through a robust aggregation scheme based on MAD-Sigmoid and Soft-OR to guide bit allocation. Extensive experiments demonstrate that NSDS consistently achieves superior performance compared to various baselines across diverse models and downstream tasks, without relying on any calibration data.

Production LLM systems often rely on separate models for safety and other classification-heavy steps, increasing latency, VRAM footprint, and operational complexity. We instead reuse computation already paid for by the serving LLM: we train lightweight probes on its hidden states and predict labels in the same forward pass used for generation. We frame classification as representation selection over the full token-layer hidden-state tensor, rather than committing to a fixed token or fixed layer (e.g., first-token logits or final-layer pooling). To implement this, we introduce a two-stage aggregator that (i) summarizes tokens within each layer and (ii) aggregates across layer summaries to form a single representation for classification. We instantiate this template with direct pooling, a 100K-parameter scoring-attention gate, and a downcast multi-head self-attention (MHA) probe with up to 35M trainable parameters. Across safety and sentiment benchmarks our probes improve over logit-only reuse (e.g., MULI) and are competitive with substantially larger task-specific baselines, while preserving near-serving latency and avoiding the VRAM and latency costs of a separate guard-model pipeline.

With the increasing numbers of publicly available models, there are probably pretrained, online models for most tasks users require. However, current model search methods are rudimentary, essentially a text-based search in the documentation, thus users cannot find the relevant models. This paper presents ProbeLog, a method for retrieving classification models that can recognize a target concept, such as "Dog", without access to model metadata or training data. Differently from previous probing methods, ProbeLog computes a descriptor for each output dimension (logit) of each model, by observing its responses on a fixed set of inputs (probes). Our method supports both logit-based retrieval ("find more logits like this") and zero-shot, text-based retrieval ("find all logits corresponding to dogs"). As probing-based representations require multiple costly feedforward passes through the model, we develop a method, based on collaborative filtering, that reduces the cost of encoding repositories by 3x. We demonstrate that ProbeLog achieves high retrieval accuracy, both in real-world and fine-grained search tasks and is scalable to full-size repositories.

Recent studies have observed that intermediate layers of foundation models often yield more discriminative representations than the final layer. While initially attributed to autoregressive pretraining, this phenomenon has also been identified in models trained via supervised and discriminative self-supervised objectives. In this paper, we conduct a comprehensive study to analyze the behavior of intermediate layers in pretrained vision transformers. Through extensive linear probing experiments across a diverse set of image classification benchmarks, we find that distribution shift between pretraining and downstream data is the primary cause of performance degradation in deeper layers. Furthermore, we perform a fine-grained analysis at the module level. Our findings reveal that standard probing of transformer block outputs is suboptimal; instead, probing the activation within the feedforward network yields the best performance under significant distribution shift, whereas the normalized output of the multi-head self-attention module is optimal when the shift is weak.

Language models (LMs) require robust episodic grounding-the capacity to learn from and apply past experiences-to excel at physical planning tasks. Current episodic grounding approaches struggle with scalability and integration, limiting their effectiveness, especially for medium-sized LMs (7B parameters). While larger LMs (70-405B parameters) possess superior hierarchical representations and extensive pre-trained knowledge, they encounter a fundamental scale paradox: despite their advanced abstraction capabilities, they lack efficient mechanisms to leverage experience streams. We propose a scalable weak-to-strong episodic learning framework that effectively transfers episodic behaviors from smaller to larger LMs. This framework integrates Monte Carlo tree search for structured experience collection with a novel distillation method, preserving the inherent LM capabilities while embedding episodic memory. Experiments demonstrate our method surpasses state-of-the-art proprietary LMs by 3.45% across diverse planning and question-answering tasks. Layer-wise probing further indicates significant improvements in task alignment, especially within deeper LM layers, highlighting stable generalization even for previously unseen scenarios with increased planning complexity-conditions where baseline methods degrade markedly.

Large Language Models (LLMs) excel at tasks like language processing, strategy games, and reasoning but struggle to build generalizable internal representations essential for adaptive decision-making in agents. For agents to effectively navigate complex environments, they must construct reliable world models. While LLMs perform well on specific benchmarks, they often fail to generalize, leading to brittle representations that limit their real-world effectiveness. Understanding how LLMs build internal world models is key to developing agents capable of consistent, adaptive behavior across tasks. We analyze OthelloGPT, a GPT-based model trained on Othello gameplay, as a controlled testbed for studying representation learning. Despite being trained solely on next-token prediction with random valid moves, OthelloGPT shows meaningful layer-wise progression in understanding board state and gameplay. Early layers capture static attributes like board edges, while deeper layers reflect dynamic tile changes. To interpret these representations, we compare Sparse Autoencoders (SAEs) with linear probes, finding that SAEs offer more robust, disentangled insights into compositional features, whereas linear probes mainly detect features useful for classification. We use SAEs to decode features related to tile color and tile stability, a previously unexamined feature that reflects complex gameplay concepts like board control and long-term planning. We study the progression of linear probe accuracy and tile color using both SAE's and linear probes to compare their effectiveness at capturing what the model is learning. Although we begin with a smaller language model, OthelloGPT, this study establishes a framework for understanding the internal representations learned by GPT models, transformers, and LLMs more broadly. Our code is publicly available: https://github.com/ALT-JS/OthelloSAE.

Recent attacks show that behavioural unlearning of large language models leaves internal traces recoverable by adversarial probes. We characterise where this retention lives and show it can be surgically removed without measurable capability cost. Our central protocol is a leave-one-out cross-sequence probe that tests whether a memorisation signature generalises across held-out sequences. The signature is real and consistent across scale: memorisation-specific gaps of +0.32, +0.19, +0.30 on Pythia-70M, GPT-2 medium, and Mistral-7B; on Pythia-70M, the random-initialisation control collapses to -0.04 at the deepest layer where the pretrained signature peaks. The probe direction is causally separable from recall -- projecting it out collapses the signature locally (+0.44 -> -0.19) while behavioural recall barely changes -- and a probe trained on naturally memorised content does not classify fine-tuning-injected secrets, marking two representationally distinct regimes. We then introduce probe-geometry alignment (PGA), a surgical erasure that aligns activations along the probe's live readout direction at each depth. PGA drives the cross-sequence probe below random chance at all four scales tested (toy depth-4: 0.17; Pythia-70M: 0.07; Mistral-7B: 0.45; GPT-2 medium: 0.06 via MD-PGA k=2) and remains robust to six adversarial probe variants. Against a re-fitting attacker who trains a fresh probe on PGA-treated activations, we extend PGA adversarially, defeating the re-fit probe at every memorisation-relevant depth while preserving five zero-shot capability benchmarks within 2.8 percentage points per task (mean Δacc = +0.2pp). The cross-sequence signature is a real, causally separable, regime-specific property of pretrained representations -- removable below chance with a single rank-one intervention per depth at no measurable capability cost.

High-fidelity visuo-tactile sensing is important for precise robotic manipulation, yet most vision-based tactile sensors rely on opaque coatings that enable tactile sensing but block direct visual observation. We propose MuxGel, a spatially multiplexed sensor that captures both external visual information and contact-induced tactile signals through a single camera. By using a checkerboard coating pattern, MuxGel interleaves tactile-sensitive regions with transparent windows for external vision. This design maintains standard form factors, allowing for plug-and-play integration into GelSight-style sensors by simply replacing the gel pad. To recover dense visual and tactile signals from the multiplexed inputs, we develop a U-Net-based reconstruction framework trained with a sim-to-real pipeline. Experiments on unseen objects demonstrate the framework's generalization and accuracy. We further demonstrate MuxGel in grasping tasks, where visual feedback supports alignment and tactile feedback supports contact interaction. Results show that MuxGel enables single-camera dual-modal sensing within a GelSight-style implementation, providing local visual feedback and reconstructed tactile feedback with potential extension to other optical tactile sensors. Project webpage: https://zhixianhu.github.io/muxgel/.

We propose in this work a novel iterative direct sampling method for imaging moving inhomogeneities in parabolic problems using boundary measurements. It can efficiently identify the locations and shapes of moving inhomogeneities when very limited data are available, even with only one pair of lateral Cauchy data, and enjoys remarkable numerical stability for noisy data and over an extended time horizon. The method is formulated in an abstract framework, and is applicable to linear and nonlinear parabolic problems, including linear, nonlinear, and mixed-type inhomogeneities. Numerical experiments across diverse scenarios show its effectiveness and robustness against the data noise.

Representing and navigating hierarchy is a fundamental primitive of reasoning. Large language models have demonstrated proficiency in a wide variety of tasks requiring hierarchical reasoning, but there exists limited analysis on how the models geometrically represent the necessary latent constructions for such thinking. To this end, we develop H-probes, a collection of linear probes that extract hierarchical structure, specifically depth and pairwise distance, from latent representations. In synthetic tree traversal tasks, the H-probes robustly find the subspaces containing hierarchical structure necessary to complete the tasks; furthermore, in comprehensive ablation experiments, we show that these hierarchy-containing subspaces are low-dimensional, causally important for high task performance, and generalize within- and out-of-domain. Furthermore, we find analogous, though weaker, hierarchical structure in real-world hierarchical contexts such as mathematical reasoning traces. These results demonstrate that models represent hierarchy not only at the level of syntax and concepts, but at deeper levels of abstraction -- including the reasoning process itself.

Standard representation probing for visual models relies on mathematically permutation-invariant operations like Global Average Pooling (GAP) or CLS tokens, treating patch representations as an unstructured bag-of-words. We challenge this paradigm by demonstrating that token order is a critical, exploitable dimension in frozen visual representations (e.g., MAE, BEiT, DINOv2, and ViT as CLS-ablation extreme). We propose SSMProbe, a probing framework driven by a State Space Model (SSM). Operating as discrete Linear Time-Invariant (LTI) dynamical systems, SSMs act as permutation-sensitive probes where sequence order strictly dictates the final state due to inherent memory decay. Formulating token ordering as an information scheduling problem, we compare fixed scan heuristics against a differentiable soft permutation (Sinkhorn-based) learned from downstream supervision. Evaluations on standard and fine-grained classification benchmarks reveal a striking order gap: while fixed scans fail dramatically on highly localized patch features, our learned soft permutation successfully extracts highly competitive performance from otherwise heavily localized patch sequences. We find that pre-training objectives fundamentally shape token structure: DINOv2 concentrates global semantics in optimized CLS tokens leaving patches hyperspecialized, pure MAE preserves distributed representations with heterogeneous patch informativeness, and ViT represents a supervised CLS-dominated extreme. BEiT occupies middle ground. This heterogeneity is order-dependent -- meaning the SSM probe's performance depends critically on which tokens are placed at which temporal positions -- and is not merely a topological property of the spatial grid. SSMProbe's learned routing effectively discovers and exploits this heterogeneity, offering a powerful new diagnostic lens for visual representation analysis.

This work explores whether language models encode meaningfully grounded representations of sounds of objects. We learn a linear probe that retrieves the correct text representation of an object given a snippet of audio related to that object, where the sound representation is given by a pretrained audio model. This probe is trained via a contrastive loss that pushes the language representations and sound representations of an object to be close to one another. After training, the probe is tested on its ability to generalize to objects that were not seen during training. Across different language models and audio models, we find that the probe generalization is above chance in many cases, indicating that despite being trained only on raw text, language models encode grounded knowledge of sounds for some objects.

Recent incidents have highlighted the challenge of monitoring LLM agents and the danger of models deceiving people. We show that white-box deception detection via probes can be scaled up to frontier monitoring settings by collecting the largest deception dataset to date for training probes and introducing a novel probe architecture which can aggregate information across many layers and tokens. Our probes achieve 98.4\% AUROC in SHADE-Arena and 98.0\% in BASH-Arena (vs. 97.9\%, 97.6\% resp. for action-only text monitors) and show improved efficacy as the underlying model is scaled up. We further test probes on several cases where deception cannot be determined from the context alone. In these cases, which we refer to as introspective deception, the ground truth can only be determined through careful elicitation or thorough knowledge of a model's training data. In one such evaluation, we show that probes can distinguish transcripts containing a model's true hidden goal from other goals with an AUROC of up to 99.7\%. Our probes also readily detect deception on prominent open-weight models which lie about politically sensitive topics, and about their beliefs when put under pressure. We release our training dataset, dubbed \fibs, to help drive frontier deployment of effective probes, and encourage the community to expand upon it with further examples of deception and sabotage.

Amortized neural inverse design typically remains closed-world: component choices are fixed vocabulary tokens, coordinate grids are frozen at training time, and continuous variables are discretized into sequence tokens. Multilayer optical coatings are an industrially important instance, coupling material sequence, layer thickness and wavelength-dependent response. We present IrisFlow, a query-based, open-vocabulary flow-matching framework instantiated in coatings: the target reflectance/transmittance spectrum, wavelength grid, candidate-material optical constants and layer count are supplied at query time. Candidate materials enter as wavelength-aware optical tokens rather than learned identities; material sequences are sampled by discrete flow matching over the query's candidate bank, thicknesses by continuous flow matching without discretization. A single 136M-parameter model designs 2-100-layer stacks. Across a 224-task benchmark it reconstructs in-distribution targets faithfully and retains same-order accuracy on a 15-material held-out bank without retraining; it reconstructs bands up to 1100 nm beyond its training envelope, designs against analytic application specifications and outperforms an autoregressive baseline on that baseline's material library. With optical constants calibrated to our deposition process, IrisFlow designs four color-displaying coolers, fabricated by ion-assisted evaporation: the three chromatic devices reach a CIEDE2000 color error of 3.1-5.2 while retaining 93-95% solar near-infrared reflectance, demonstrating open-vocabulary design carried through to fabricated coatings.

Training-free token reduction accelerates vision transformers by removing redundant tokens across layers, recovering most of the original accuracy at a fraction of the compute. These methods, however, are designed and evaluated primarily on clean data, and under real-world distribution shift their accuracy gap to the uncompressed model widens with the removal rate. We show that this gap is governed by the reduction schedule, the depth profile of removal, usually left fixed as an implementation detail. Concretely, we introduce a one-parameter late-concentrated power-law schedule that consistently improves out-of-distribution accuracy over flat at no extra inference cost. On ImageNet-C with DeiT-S, the late schedule closes 83% of that gap at a 26% compute reduction (+1.17pp), and 99% of it at a lighter 7% reduction (+0.26pp). The gain cannot be attributed to retaining more tokens or using extra compute: held to flat's compute, the late schedule removes more tokens in total and leaves fewer tokens at the end, yet still wins. Single-layer probes point to a mechanism: earlier reductions perturb features that pass through more remaining layers, front-loading reduction error in depth. The effect is broad, holding across five token-reduction methods (ToMe, EViT, ATS, ATC, PiToMe), nine backbones, all ImageNet-C corruption types, eight further shift suites, and two further modalities, video and vision-language QA. It is also specific to shift, still positive on clean and rising monotonically to ~4x that at the highest severity 5. The schedule keeps its gain under six test-time adaptation methods, and needs no per-input or per-domain tuning.

The most widely used method for obtaining high-quality two-dimensional materials is through mechanical exfoliation of bulk crystals. Manual identification of suitable flakes from the resulting random distribution of crystal thicknesses and sizes on a substrate is a time-consuming, tedious task. Here, we present a platform for fully automated scanning, detection, and classification of two-dimensional materials, the source code of which we make openly available. Our platform is designed to be accurate, reliable, fast, and versatile in integrating new materials, making it suitable for everyday laboratory work. The implementation allows fully automated scanning and analysis of wafers with an average inference time of 100 ms for images of 2.3 Mpixels. The developed detection algorithm is based on a combination of the flakes' optical contrast toward the substrate and their geometric shape. We demonstrate that it is able to detect the majority of exfoliated flakes of various materials, with an average recall (AR50) between 67% and 89%. We also show that the algorithm can be trained with as few as five flakes of a given material, which we demonstrate for the examples of few-layer graphene, WSe_2, MoSe_2, CrI_3, 1T-TaS_2 and hexagonal BN. Our platform has been tested over a two-year period, during which more than 10^6 images of multiple different materials were acquired by over 30 individual researchers.

Generating cognitive-aligned layered SVGs remains challenging due to existing methods' tendencies toward either oversimplified single-layer outputs or optimization-induced shape redundancies. We propose LayerTracer, a diffusion transformer based framework that bridges this gap by learning designers' layered SVG creation processes from a novel dataset of sequential design operations. Our approach operates in two phases: First, a text-conditioned DiT generates multi-phase rasterized construction blueprints that simulate human design workflows. Second, layer-wise vectorization with path deduplication produces clean, editable SVGs. For image vectorization, we introduce a conditional diffusion mechanism that encodes reference images into latent tokens, guiding hierarchical reconstruction while preserving structural integrity. Extensive experiments demonstrate LayerTracer's superior performance against optimization-based and neural baselines in both generation quality and editability, effectively aligning AI-generated vectors with professional design cognition.

This paper introduces the Manifold Probe, a supervised method for discovering representation manifolds in superposition. The method generalizes linear regression probes by learning the space of features of a concept that can be linearly predicted from the representations, and then learning the directions used to encode them. We demonstrate the probe on representations of time and space in Llama 2-7b, finding manifolds which linearly represent an interpretable set of features in each case. In the case of time, we show that by steering along the manifold, we can influence the model's completions about the years in which famous songs, movies and books were released, providing evidence that the Manifold Probe can discover manifolds which are causally involved in model behaviour.

Diagnosing 802.11 packet captures requires expert protocol knowledge, is slow, inconsistent across engineers, and unscalable. LLM-based approaches sound plausible but fabricate protocol events absent from captures (especially truncated traces), produce uncalibrated confidence scores, and suffer evaluation bias when golden references are co-produced by the model under test. We introduce PROBE (Protocol Reasoning Over evidence-Based Ensembles), a multi-stage pipeline addressing all three failures. It integrates (i) deterministic PCAP-to-text normalization with frame-level verifiability, (ii) multi-run, multi-candidate ensembles with optional cross-model second opinion and progressive obfuscation, (iii) a verdict-aware evidence framework treating absence of failure evidence as contributing evidence, and (iv) a fully deterministic composite reliability score from evidence validity, run-to-run stability, and cross-model agreement without LLM self-assessment. On 87 enterprise Wi-Fi captures (104 capture-reviewer pairs), single-pass LLM analysis raises weighted evidence F1 from 0.871 (expert baseline) to 0.912 but misses critical frames in 35% of cases. Naive ensemble voting drops below baseline (0.842) as majority voting amplifies conservative verdicts: 50% of confirmed failures are misclassified as 'no issue' or 'insufficient evidence.' Adding evidence-grounded reconciliation achieves 0.957 F1, a 96% auto-accept rate, and a worst-case floor above 0.70. LLM self-reported confidence clusters at 0.95 regardless of difficulty (71% report exactly 0.95), confirming it is uninformative. We also introduce a model-agnostic evaluation framework using per-field assertion matching, eliminating circular bias from model-co-produced golden references.

As LLM-based judges become integral to industry applications, obtaining well-calibrated uncertainty estimates efficiently has become critical for production deployment. However, existing techniques, such as verbalized confidence and multi-generation methods, are often either poorly calibrated or computationally expensive. We introduce linear probes trained with a Brier score-based loss to provide calibrated uncertainty estimates from reasoning judges' hidden states, requiring no additional model training. We evaluate our approach on both objective tasks (reasoning, mathematics, factuality, coding) and subjective human preference judgments. Our results demonstrate that probes achieve superior calibration compared to existing methods with approx10x computational savings, generalize robustly to unseen evaluation domains, and deliver higher accuracy on high-confidence predictions. However, probes produce conservative estimates that underperform on easier datasets but may benefit safety-critical deployments prioritizing low false-positive rates. Overall, our work demonstrates that interpretability-based uncertainty estimation provides a practical and scalable plug-and-play solution for LLM judges in production.

Recent advances in large-scale pretraining have yielded visual foundation models with strong capabilities. Not only can recent models generalize to arbitrary images for their training task, their intermediate representations are useful for other visual tasks such as detection and segmentation. Given that such models can classify, delineate, and localize objects in 2D, we ask whether they also represent their 3D structure? In this work, we analyze the 3D awareness of visual foundation models. We posit that 3D awareness implies that representations (1) encode the 3D structure of the scene and (2) consistently represent the surface across views. We conduct a series of experiments using task-specific probes and zero-shot inference procedures on frozen features. Our experiments reveal several limitations of the current models. Our code and analysis can be found at https://github.com/mbanani/probe3d.

Contextual hallucinations -- statements unsupported by given context -- remain a significant challenge in AI. We demonstrate a practical interpretability insight: a generator-agnostic observer model detects hallucinations via a single forward pass and a linear probe on its residual stream. This probe isolates a single, transferable linear direction separating hallucinated from faithful text, outperforming baselines by 5-27 points and showing robust mid-layer performance across Gemma-2 models (2B to 27B). Gradient-times-activation localises this signal to sparse, late-layer MLP activity. Critically, manipulating this direction causally steers generator hallucination rates, proving its actionability. Our results offer novel evidence of internal, low-dimensional hallucination tracking linked to specific MLP sub-circuits, exploitable for detection and mitigation. We release the 2000-example ContraTales benchmark for realistic assessment of such solutions.

Tool-augmented LLM agents tend to call tools indiscriminately, even when the model can answer directly. Each unnecessary call wastes API fees and latency, yet no existing benchmark systematically studies when a tool call is actually needed. We propose When2Tool, a benchmark of 18 environments (15 single-hop, 3 multi-hop) spanning three categories of tool necessity -- computational scale, knowledge boundaries, and execution reliability -- each with controlled difficulty levels that create a clear decision boundary between tool-necessary and tool-unnecessary tasks. We evaluate two families of training-free baselines: Prompt-only (varying the prompt to discourage unnecessary calls) and Reason-then-Act (requiring the model to reason about tool necessity before acting). Both provide limited control: Prompt-only suppresses necessary calls alongside unnecessary ones, and Reason-then-Act still incurs a disproportionate accuracy cost on hard tasks. To understand why these baselines fail, we probe the models' hidden states and find that tool necessity is linearly decodable from the pre-generation representation with AUROC 0.89--0.96 across six models, substantially exceeding the model's own verbalized reasoning. This reveals that models already know when tools are needed, but fail to act on this knowledge during generation. Building on this finding, we propose Probe&Prefill, which uses a lightweight linear probe to read the hidden-state signal and prefills the model's response with a steering sentence. Across all models tested, Probe&Prefill reduces tool calls by 48% with only 1.7% accuracy loss, while the best baseline at comparable accuracy only reduces 6% of tool calls, or achieves a similar tool call reduction but incurs a 5times higher accuracy loss. Our code is available at https://github.com/Trustworthy-ML-Lab/when2tool

Hybrid photon counting detectors (HPCDs) have unlocked new capabilities for x-ray-based measurements at synchrotrons around the world in the last 30 years. By leveraging independently optimized sensor and readout layers, they offer high quantum efficiency (> 80 %), ultra-low dark counts, sub-pixel point-spread function, and high count rates (> 10^{6} counts per pixel per second). Furthermore, their small pixel size and large active area endow them with excellent coverage and resolution for both real-space and reciprocal space imaging. Here, we demonstrate that HPCDs are also well-suited for laboratory-based nanoscale x-ray tomography (nano-xCT). We perform nano-xCT on an integrated circuit fabricated at the 130-nm node and produce a 3D reconstruction with 40 times more photons collected 20 times faster than in this group's previous work, for an overall speedup of 800times. We review the technical considerations of using an HPCD for tabletop tomography. We quantify our reconstruction image quality using well-established metrics, including the modulation transfer function (MTF), Fourier shell correlation (FSC), and contrast-to-noise (CNR), to validate our choice of experimental parameters that provide sufficient resolution and imaging speed. Using these metrics, we determine that even under current experimental conditions, 160 nm wiring features are reconstructed at 75-80 nm spatial resolution.

We simulate the electronic and transport properties of metal/two-dimensional material/metal vertical heterostructures, with a focus on graphene, hexagonal boron nitride and two phases of molybdenum diselenide. Using density functional theory and non-equilibrium Green's function, we assess how stacking configurations and material thickness impact important properties, such as density of states, potential barriers and conductivity. For monolayers, strong orbital hybridization with the metallic electrodes significantly alters the electronic characteristics, with the formation of states within the gap of the semiconducting 2D materials. Trilayers reveal the critical role of interlayer coupling, where the middle layer retains its intrinsic properties, thus influencing the overall conductivity. Our findings highlight the potential for customized multilayer designs to optimize electronic device performance based on two-dimensional materials.

Despite the emergence of diffusion large language models (D-LLMs) as an alternative to autoregressive large language models (AR-LLMs), safety monitoring for D-LLMs remains largely unexplored. Unlike AR-LLMs, D-LLMs generate text through a multi-step denoising process, exposing intermediate hidden representations that may contain safety-relevant information unavailable in standard single-step monitoring setups. Motivated by the suitability of lightweight probes for always-on monitoring, we analyze which trajectory-level signals best indicate when such probes are likely to struggle. We find that the most informative signal is safety hesitation: intermediate hidden states repeatedly falling within a small margin of the probe's decision boundary. The number of such hesitation steps in D-LLM's trajectory predicts probe failure effectively, providing a proxy of sample difficulty. Building on this analysis, we propose D^2-Monitor, a bi-level safety monitor for D-LLMs. D^2-Monitor adopts a lightweight probe as an always-on monitor to jointly estimate hesitation and perform base classification. When the hesitation level exceeds a threshold, a more expressive but computationally heavier probe is activated. This dynamic routing mechanism allocates monitoring resources efficiently at test time. Evaluated on 3 datasets (WildguardMix, ToxicChat, OpenAI-Moderation) across 4 D-LLMs, D^2-Monitor achieves state-of-the-art performance with a compact parameter footprint (leq 0.85M parameters), and exhibits the best trade-off between effectiveness and efficiency relative to 8 baselines.

The relationship between material properties and independent variables such as temperature, external field or time, is usually represented by a curve or surface in a multi-dimensional space. Determining such a curve or surface requires a series of experiments or calculations which are often time and cost consuming. A general strategy uses an appropriate utility function to sample the space to recommend the next optimal experiment or calculation within an active learning loop. However, knowing what the optimal sampling strategy to use to minimize the number of experiments is an outstanding problem. We compare a number of strategies based on directed exploration on several materials problems of varying complexity using a Kriging based model. These include one dimensional curves such as the fatigue life curve for 304L stainless steel and the Liquidus line of the Fe-C phase diagram, surfaces such as the Hartmann 3 function in 3D space and the fitted intermolecular potential for Ar-SH, and a four dimensional data set of experimental measurements for BaTiO3 based ceramics. We also consider the effects of experimental noise on the Hartmann 3 function. We find that directed exploration guided by maximum variance provides better performance overall, converging faster across several data sets. However, for certain problems, the trade-off methods incorporating exploitation can perform at least as well, if not better than maximum variance. Thus, we discuss how the choice of the utility function depends on the distribution of the data, the model performance and uncertainties, additive noise as well as the budget.

The success of pre-trained contextualized representations has prompted researchers to analyze them for the presence of linguistic information. Indeed, it is natural to assume that these pre-trained representations do encode some level of linguistic knowledge as they have brought about large empirical improvements on a wide variety of NLP tasks, which suggests they are learning true linguistic generalization. In this work, we focus on intrinsic probing, an analysis technique where the goal is not only to identify whether a representation encodes a linguistic attribute but also to pinpoint where this attribute is encoded. We propose a novel latent-variable formulation for constructing intrinsic probes and derive a tractable variational approximation to the log-likelihood. Our results show that our model is versatile and yields tighter mutual information estimates than two intrinsic probes previously proposed in the literature. Finally, we find empirical evidence that pre-trained representations develop a cross-lingually entangled notion of morphosyntax.

Characterizing materials with electron micrographs poses significant challenges for automated labeling due to the complex nature of nanomaterial structures. To address this, we introduce a fully automated, end-to-end pipeline that leverages recent advances in Generative AI. It is designed for analyzing and understanding the microstructures of semiconductor materials with effectiveness comparable to that of human experts, contributing to the pursuit of Artificial General Intelligence (AGI) in nanomaterial identification. Our approach utilizes Large MultiModal Models (LMMs) such as GPT-4V, alongside text-to-image models like DALLE-3. We integrate a GPT-4 guided Visual Question Answering (VQA) method to analyze nanomaterial images, generate synthetic nanomaterial images via DALLE-3, and employ in-context learning with few-shot prompting in GPT-4V for accurate nanomaterial identification. Our method surpasses traditional techniques by enhancing the precision of nanomaterial identification and optimizing the process for high-throughput screening.

Layering information spaces is a promising strategy to design intuitive and engaging interactive experiences. Although multi-layer displays enable promising interaction techniques through limited depth perception - achieved via slight separation between layers - it remains unclear how to fully design experiences that leverage the unique affordances of layered information. To address this, we introduce Proscenium, a dual-layer, large transparent display workspace setup with an adjustable separation between the layers. We demonstrate our preliminary design space focusing on how rendered information can be transitioned and linked across displays, and showcase 14 speculative experience prototypes across six categories.

Large Multimodal Models (LMMs) have shown remarkable progress in the field of medical Visual Question Answering (Med-VQA), achieving high accuracy on existing benchmarks. However, their reliability under robust evaluation is questionable. This study reveals that state-of-the-art models, when subjected to simple probing evaluation, perform worse than random guessing on medical diagnosis questions. To address this critical evaluation problem, we introduce the Probing Evaluation for Medical Diagnosis (ProbMed) dataset to rigorously assess LMM performance in medical imaging through probing evaluation and procedural diagnosis. Particularly, probing evaluation features pairing original questions with negation questions with hallucinated attributes, while procedural diagnosis requires reasoning across various diagnostic dimensions for each image, including modality recognition, organ identification, clinical findings, abnormalities, and positional grounding. Our evaluation reveals that top-performing models like GPT-4V and Gemini Pro perform worse than random guessing on specialized diagnostic questions, indicating significant limitations in handling fine-grained medical inquiries. Besides, models like LLaVA-Med struggle even with more general questions, and results from CheXagent demonstrate the transferability of expertise across different modalities of the same organ, showing that specialized domain knowledge is still crucial for improving performance. This study underscores the urgent need for more robust evaluation to ensure the reliability of LMMs in critical fields like medical diagnosis, and current LMMs are still far from applicable to those fields.

Large language models (LLMs) have shown remarkable performances across a wide range of tasks. However, the mechanisms by which these models encode tasks of varying complexities remain poorly understood. In this paper, we explore the hypothesis that LLMs process concepts of varying complexities in different layers, introducing the idea of "Concept Depth" to suggest that more complex concepts are typically acquired in deeper layers. Specifically, we categorize concepts based on their level of abstraction, defining them in the order of increasing complexity within factual, emotional, and inferential tasks. We conduct extensive probing experiments using layer-wise representations across various LLM families (Gemma, LLaMA, QWen) on various datasets spanning the three domains of tasks. Our findings reveal that models could efficiently conduct probing for simpler tasks in shallow layers, and more complex tasks typically necessitate deeper layers for accurate understanding. Additionally, we examine how external factors, such as adding noise to the input and quantizing the model weights, might affect layer-wise representations. Our findings suggest that these factors can impede the development of a conceptual understanding of LLMs until deeper layers are explored. We hope that our proposed concept and experimental insights will enhance the understanding of the mechanisms underlying LLMs. Our codes are available at https://github.com/Luckfort/CD.

Autoformalization, translating natural-language mathematics into formal proof assistants, is bottlenecked not by translation fluency but by faithfulness: a formal statement can typecheck and be provable, yet still encode a different theorem than the source intended. We introduce Bidirectional Provability Fingerprinting (), a framework that certifies faithfulness by characterizing each candidate through its forward and backward consequence neighborhoods in the ambient theory and matching these against probes derived from the natural-language statement. We further introduce four novel components: (i) Counterfactual Probe Generation (), a contrastive procedure that synthesizes probes targeting specific drift directions; (ii) the Equivalence Spectrum, a continuous faithfulness score that replaces brittle binary verdicts; (iii) Adaptive Probe Budget Allocation (), an information-theoretic budget router; and (iv) Faithfulness-Guided Decoding (), which uses signals as a reward during autoformalization. We prove a drift detection theorem and a PAC-faithfulness result establishing that the equivalence class of a natural language statement is learnable from O(log(1/δ)/varepsilon) probes under mild assumptions. We release , a benchmark of 2{,}183 NL/Lean~4 pairs with controlled drift labels across six subfields of mathlib4. \,+\, detects 89.6% of drifted formalizations at a 3.0% false-positive rate-against 41.2% for typecheck and 63.3% for LLM-judge baselines, and reduces the rate at which a state-of-the-art autoformalizer emits drifted statements by 47%. https://pmlrbd.github.io/BPF/

Polarimetric imaging enables advanced vision applications such as normal estimation and de-reflection by capturing unique surface-material interactions. However, existing applications (alternatively called downstream tasks) rely on datasets constructed by naively regrouping raw measurements from division-of-focal-plane sensors, where pixels of the same polarization angle are extracted and aligned into sparse images without proper demosaicking. This reconstruction strategy results in suboptimal, incomplete targets that limit downstream performance. Moreover, current demosaicking methods are task-agnostic, optimizing only for photometric fidelity rather than utility in downstream tasks. Towards this end, we propose PolarAPP, the first framework to jointly optimize demosaicking and its downstream tasks. PolarAPP introduces a feature alignment mechanism that semantically aligns the representations of demosaicking and downstream networks via meta-learning, guiding the reconstruction to be task-aware. It further employs an equivalent imaging constraint for demosaicking training, enabling direct regression to physically meaningful outputs without relying on rearranged data. Finally, a task-refinement stage fine-tunes the task network using the stable demosaicking front-end to further enhance accuracy. Extensive experimental results demonstrate that PolarAPP outperforms existing methods in both demosaicking quality and downstream performance. Code is available upon acceptance.

Nanophotonic sensors amplify analyte-induced optical signals through resonantly enhanced light-matter interactions. While effective for refractometric sensing, conventional sensing platforms typically collapse spatial variations in analyte distributions into ensemble-averaged readouts, thereby obscuring local heterogeneity. Here we present a dual-channel metasurface sensor capable of detecting both net analyte loading and nanoscale spatial inhomogeneity at deep-subwavelength scales. The device supports two distinct high-Q modes with deeply structured near-field profiles of opposite parity. Their complementary modal responses decouple analyte perturbations into bulk and differential components, which are encoded into two spectrally resolvable channels. We demonstrate these sensing modalities across analyte configurations exhibiting diverse forms of nanoscale heterogeneity, achieving a refractometric sensitivity of 357 nm/RIU and inhomogeneity detection below λ/10. This dual-channel capability, which extends nanophotonic sensing from analyte quantity to its spatial variation, opens a new avenue for multidimensional analysis of biological and material systems.

Large Language Models (LLMs) can comply with harmful instructions, raising serious safety concerns despite their impressive capabilities. Recent work has leveraged probing-based approaches to study the separability of malicious and benign inputs in LLMs' internal representations, and researchers have proposed using such probing methods for safety detection. We systematically re-examine this paradigm. Motivated by poor out-of-distribution performance, we hypothesize that probes learn superficial patterns rather than semantic harmfulness. Through controlled experiments, we confirm this hypothesis and identify the specific patterns learned: instructional patterns and trigger words. Our investigation follows a systematic approach, progressing from demonstrating comparable performance of simple n-gram methods, to controlled experiments with semantically cleaned datasets, to detailed analysis of pattern dependencies. These results reveal a false sense of security around current probing-based approaches and highlight the need to redesign both models and evaluation protocols, for which we provide further discussions in the hope of suggesting responsible further research in this direction. We have open-sourced the project at https://github.com/WangCheng0116/Why-Probe-Fails.

Electromagnetic (EM) side-channel analysis traditionally assumes a stationary, close-proximity probe - a threat model that underestimates aerial adversaries. TriSweep is a simulation framework that designs and evaluates a four-drone swarm architecture for autonomous standoff EM-SCA of embedded microcontrollers at 0.25-1.5 m. Three spatially specialized collector drones - Anchor (full-spectrum), Mask Probe (mask-register loading leakage), and Cipher Probe (masked SubBytes output leakage) - feed a stationary Accumulator drone that performs coherent combining (+4.8 dB SNR gain) and second-order mask cancellation via a centered product of the two spatially separated leakage streams. Evaluated against three real ANSSI ASCAD datasets (ATmega8515 masked AES-128 and 50/100-sample desynchronized variants), the framework achieves a simulated key rank of 18 +/- 1.7 (five-seed) at 0.25 m on the primary masked dataset. Profiling-trace cross-correlation alignment reduces single-drone rank from 89 to 21 on the 100-sample-jitter variant, demonstrating compensation for drone hover vibration. A two-channel CNN in the Accumulator converges to a loss of 0.454 (vs. random baseline 5.545) and improves rank on desynchronized datasets. No physical hardware has been fabricated; prototype construction is the planned next step.

Pre-trained contextual representations have led to dramatic performance improvements on a range of downstream tasks. Such performance improvements have motivated researchers to quantify and understand the linguistic information encoded in these representations. In general, researchers quantify the amount of linguistic information through probing, an endeavor which consists of training a supervised model to predict a linguistic property directly from the contextual representations. Unfortunately, this definition of probing has been subject to extensive criticism in the literature, and has been observed to lead to paradoxical and counter-intuitive results. In the theoretical portion of this paper, we take the position that the goal of probing ought to be measuring the amount of inductive bias that the representations encode on a specific task. We further describe a Bayesian framework that operationalizes this goal and allows us to quantify the representations' inductive bias. In the empirical portion of the paper, we apply our framework to a variety of NLP tasks. Our results suggest that our proposed framework alleviates many previous problems found in probing. Moreover, we are able to offer concrete evidence that -- for some tasks -- fastText can offer a better inductive bias than BERT.

We present a generative framework for inverse design of five-layer transmissive Huygens' metasurfaces (HMSs), addressing a longstanding challenge in achieving full-phase, high-efficiency unit cell designs with minimal full-wave simulations. The key to achieving this is our reliance on the field-based semianalytical (SA) scheme developed in Part I of this paper, which allows rapid and highly effective synthesis of such multilayer composites, however with limited accuracy. To overcome the prohibitive data demands of traditional pipelines, we employ Mamba, a selective state space model well suited for long-range sequence modeling as the backbone of our learning framework. A bidirectional Mamba (Bi-Mamba) forward surrogate is first trained on SA-generated data and subsequently fine-tuned with full-wave CST samples. An ablation over a 1080-sample CST pool shows that as few as 270 full-wave calibration samples suffice to reach near-CST-level agreement at a fraction of the simulation cost. An autoregressive Mamba inverse generator is subsequently trained on surrogate-augmented data, treating unit-cell synthesis as a sequential generation task. The resulting one-to-many generative model produces diverse unit cell geometries conditioned on target scattering responses. It achieves CST-validated designs with field transmission magnitude 0.9 across the full 0-2π phase range at 20 GHz. Moreover, a CST-calibrated surrogate trained to accurately predict frequency responses (18-22 GHz) enables functional post-selection of inverse generated designs. Together, the hybrid SA-generative methodology in this two-part compilation establishes a scalable and data-efficient solution for multilayer HMS synthesis, with natural extensions toward broadband, oblique-incidence, and higher-dimensional electromagnetic inverse-design problems.

False negatives (FN) in 3D object detection, {\em e.g.}, missing predictions of pedestrians, vehicles, or other obstacles, can lead to potentially dangerous situations in autonomous driving. While being fatal, this issue is understudied in many current 3D detection methods. In this work, we propose Hard Instance Probing (HIP), a general pipeline that identifies FN in a multi-stage manner and guides the models to focus on excavating difficult instances. For 3D object detection, we instantiate this method as FocalFormer3D, a simple yet effective detector that excels at excavating difficult objects and improving prediction recall. FocalFormer3D features a multi-stage query generation to discover hard objects and a box-level transformer decoder to efficiently distinguish objects from massive object candidates. Experimental results on the nuScenes and Waymo datasets validate the superior performance of FocalFormer3D. The advantage leads to strong performance on both detection and tracking, in both LiDAR and multi-modal settings. Notably, FocalFormer3D achieves a 70.5 mAP and 73.9 NDS on nuScenes detection benchmark, while the nuScenes tracking benchmark shows 72.1 AMOTA, both ranking 1st place on the nuScenes LiDAR leaderboard. Our code is available at https://github.com/NVlabs/FocalFormer3D.

We present layered ray intersections (LaRI), a new method for unseen geometry reasoning from a single image. Unlike conventional depth estimation that is limited to the visible surface, LaRI models multiple surfaces intersected by the camera rays using layered point maps. Benefiting from the compact and layered representation, LaRI enables complete, efficient, and view-aligned geometric reasoning to unify object- and scene-level tasks. We further propose to predict the ray stopping index, which identifies valid intersecting pixels and layers from LaRI's output. We build a complete training data generation pipeline for synthetic and real-world data, including 3D objects and scenes, with necessary data cleaning steps and coordination between rendering engines. As a generic method, LaRI's performance is validated in two scenarios: It yields comparable object-level results to the recent large generative model using 4% of its training data and 17% of its parameters. Meanwhile, it achieves scene-level occluded geometry reasoning in only one feed-forward.

Forward-Forward (FF) training allows each layer to learn from a local goodness criterion. In cumulative-goodness variants, however, later layers can inherit a task that earlier layers have already partially separated. We formalize this phenomenon as layer free-riding: under the softplus FF criterion, the class-discrimination gradient reaching block d decays exponentially with the positive margin accumulated by preceding blocks. We then study three local remedies -- per-block, hardness-gated, and depth-scaled -- that recover current-layer separation measures without relying on backpropagated gradients. On CIFAR-10 and CIFAR-100, these remedies dramatically improve layer-separation statistics, with 4times--45times gains in deeper layers, while changing accuracy by less than one percentage point for non-degenerate training procedures. Tiny ImageNet provides a tougher cross-dataset check for our selected block-wise configuration and reveals the same qualitative gap between layer-health diagnostics and final accuracy. Calibration experiments further show that architecture and augmentation choices have a larger effect on final accuracy than the training-rule modifications studied here. Cumulative free-riding is therefore a real and repairable optimization pathology. Nonetheless, for the FF training rules, architectures, and datasets we study, it is not the dominant factor limiting achievable accuracy.

Transfer learning with a small amount of target data is an effective and common approach to adapting a pre-trained model to distribution shifts. In some situations, target data labels may be expensive to obtain, so we may only have access to a limited number of target data points. To make the most of a very small target dataset, we propose a lightweight, sample-efficient approach that learns a diverse set of features and adapts to a target distribution by interpolating these features. Our approach, Project and Probe (Pro^2), first learns a linear projection that maps a pre-trained embedding onto orthogonal directions while being predictive of labels in the source dataset. The goal of this step is to learn a variety of predictive features, so that at least some of them remain useful after distribution shift. Pro^2 then learns a linear classifier on top of these projected features using a small target dataset. Theoretically, we find that Pro^2 results in more sample-efficient generalization by inducing a favorable bias-variance tradeoff. Our experiments on four datasets, with multiple distribution shift settings for each, show that Pro^2 improves performance by 5-15% when given limited target data compared to prior methods such as standard linear probing.

Flying Triangulation sensors enable a free-hand and motion-robust 3D data acquisition of complex shaped objects. The measurement principle is based on a multi-line light-sectioning approach and uses sophisticated algorithms for real-time registration (S. Ettl et al., Appl. Opt. 51 (2012) 281-289). As "single-shot principle", light sectioning enables the option to get surface data from one single camera exposure. But there is a drawback: A pixel-dense measurement is not possible because of fundamental information-theoretical reasons. By "pixel-dense" we understand that each pixel displays individually measured distance information, neither interpolated from its neighbour pixels nor using lateral context information. Hence, for monomodal single-shot principles, the 3D data generated from one 2D raw image display a significantly lower space-bandwidth than the camera permits. This is the price one must pay for motion robustness. Currently, our sensors project about 10 lines (each with 1000 pixels), reaching an considerable lower data efficiency than theoretically possible for a single-shot sensor. Our aim is to push Flying Triangulation to its information-theoretical limits. Therefore, the line density as well as the measurement depth needs to be significantly increased. This causes serious indexing ambiguities. On the road to a single-shot 3D movie camera, we are working on solutions to overcome the problem of false line indexing by utilizing yet unexploited information. We will present several approaches and will discuss profound information-theoretical questions about the information efficiency of 3D sensors.

Edge magnetoplasmons (EMPs) provide a platform for probing chiral charge dynamics and nonreciprocal microwave transport in topological quantum materials. However, detecting small perturbations to EMP propagation remains challenging because their signatures in conventional microwave scattering measurements can be weak. Here, we investigate microwave-photon-induced perturbations of EMP transport using a quantum anomalous Hall topological circulator. Pump--probe measurements reveal a strongly frequency-selective response: while microwave irradiation substantially modifies the EMP transmission at several pump frequencies, the transmission remains nearly unchanged at selected frequencies, including 4 and 7 GHz. We further exploit the non-Hermitian mode hybridization of the coupled EMP-resonator system to probe the response near an exceptional point (EP). The pump-induced change in transmission magnitude near the EP is approximately twice that observed away from the EP, demonstrating an enhanced microwave response to perturbations. These results reveal the interplay among chiral EMP transport, microwave-photon-induced perturbations, and non-Hermitian dynamics, and demonstrate the potential of topological circulators as a promising platform for enhanced microwave spectroscopy and sensing.

Freestanding thin films, a class of low-dimensional materials capable of maintaining structural integrity without substrates, have emerged as a forefront research focus. Their unique advantages-circumventing substrate clamping, liberating intrinsic material properties, and enabling cross-platform heterogeneous integration-underpin this prominence. This review systematically summarizes core fabrication techniques, including physical delamination (e.g., laser lift-off, mechanical exfoliation) and chemical etching, alongside associated transfer strategies. It further explores the induced strain modulation mechanisms, extreme mechanical properties and interface decoupling effects enabled by these films. Representative case studies demonstrate breakthrough applications in flexible/ultrathin electronics, ultrahigh-sensitivity sensors and the exploration of novel quantum states. Critical challenges regarding scalable fabrication, precise interface control, and long-term stability are analyzed, concluding with prospects for emerging applications in bio-inspired intelligent devices, quantum precision sensing, and brain-inspired neural networks.

Most existing learning-based methods for solving imaging inverse problems can be roughly divided into two classes: iterative algorithms, such as plug-and-play and diffusion methods, that leverage pretrained denoisers, and unrolled architectures that are trained end-to-end for specific imaging problems. Iterative methods in the first class are computationally costly and often provide suboptimal reconstruction performance, whereas unrolled architectures are generally specific to a single inverse problem and require expensive training. In this work, we propose a novel non-iterative, lightweight architecture that incorporates knowledge about the forward operator (acquisition physics and noise parameters) without relying on unrolling. Our model is trained to solve a wide range of inverse problems beyond denoising, including deblurring, magnetic resonance imaging, computed tomography, inpainting, and super-resolution. The proposed model can be easily adapted to unseen inverse problems or datasets with a few fine-tuning steps (up to a few images) in a self-supervised way, without ground-truth references. Throughout a series of experiments, we demonstrate state-of-the-art performance from medical imaging to low-photon imaging and microscopy.

High-resolution imagery is often hindered by limitations in sensor technology, atmospheric conditions, and costs. Such challenges occur in satellite remote sensing, but also with handheld cameras, such as our smartphones. Hence, super-resolution aims to enhance the image resolution algorithmically. Since single-image super-resolution requires solving an inverse problem, such methods must exploit strong priors, e.g. learned from high-resolution training data, or be constrained by auxiliary data, e.g. by a high-resolution guide from another modality. While qualitatively pleasing, such approaches often lead to "hallucinated" structures that do not match reality. In contrast, multi-image super-resolution (MISR) aims to improve the (optical) resolution by constraining the super-resolution process with multiple views taken with sub-pixel shifts. Here, we propose SuperF, a test-time optimization approach for MISR that leverages coordinate-based neural networks, also called neural fields. Their ability to represent continuous signals with an implicit neural representation (INR) makes them an ideal fit for the MISR task. The key characteristic of our approach is to share an INR for multiple shifted low-resolution frames and to jointly optimize the frame alignment with the INR. Our approach advances related INR baselines, adopted from burst fusion for layer separation, by directly parameterizing the sub-pixel alignment as optimizable affine transformation parameters and by optimizing via a super-sampled coordinate grid that corresponds to the output resolution. Our experiments yield compelling results on simulated bursts of satellite imagery and ground-level images from handheld cameras, with upsampling factors of up to 8. A key advantage of SuperF is that this approach does not rely on any high-resolution training data.

Rich feature representations derived from CLIP-ViT have been widely utilized in AI-generated image detection. While most existing methods primarily leverage features from the final layer, we systematically analyze the contributions of layer-wise features to this task. Our study reveals that earlier layers provide more localized and generalizable features, often surpassing the performance of final-layer features in detection tasks. Moreover, we find that different layers capture distinct aspects of the data, each contributing uniquely to AI-generated image detection. Motivated by these findings, we introduce a novel adaptive method, termed MoLD, which dynamically integrates features from multiple ViT layers using a gating-based mechanism. Extensive experiments on both GAN- and diffusion-generated images demonstrate that MoLD significantly improves detection performance, enhances generalization across diverse generative models, and exhibits robustness in real-world scenarios. Finally, we illustrate the scalability and versatility of our approach by successfully applying it to other pre-trained ViTs, such as DINOv2.

Vision-Language Models (VLMs) have demonstrated remarkable progress in multimodal tasks, but remain susceptible to hallucinations, where generated text deviates from the underlying visual content. Existing hallucination detection methods primarily rely on output logits or external verification tools, often overlooking their internal mechanisms. In this work, we investigate the outputs of internal attention heads, postulating that specific heads carry the primary signals for truthful generation.However, directly probing these high-dimensional states is challenging due to the entanglement of visual-linguistic syntax and noise. To address this, we propose VIB-Probe, a novel hallucination detection and mitigation framework leveraging the Variational Information Bottleneck (VIB) theory. Our method extracts discriminative patterns across layers and heads while filtering out semantic nuisances through the information bottleneck principle. Furthermore, by leveraging the gradients of our VIB probe, we identify attention heads with strong causal influence on hallucinations and introduce an inference-time intervention strategy for hallucination mitigation. Extensive experiments across diverse benchmarks demonstrate that VIB-Probe significantly outperforms existing baselines in both settings. Our code will be made publicly available.

Recent studies on hallucination detection have shown that hallucination-related signals are more strongly encoded in intermediate layers than in the final layer of large language models (LLMs). Although a growing body of work has sought to exploit this property for hallucination detection, how to automate the selection of high-performing layers remains underexplored, and principled methods for this purpose are still lacking. To address this gap, we first propose several hypotheses for why such signals emerge in intermediate layers and evaluate corresponding criteria for automatic layer selection across diverse LLM architectures, scales, and tasks, covering both question answering and summarization hallucination detection benchmarks. However, we find that none of these criteria consistently delivers satisfactory performance. We therefore propose a new selection criterion, First Effective Peak of Intrinsic Dimension (FEPoID), which consistently identify optimal or near-optimal layers and outperforms both the aforementioned criteria and existing hallucination detection baselines. FEPoID is training-free and incurs negligible computational overhead. In addition, we study the generation behaviors of LLMs and introduce a simple yet effective truncation strategy, which further amplifies hallucination-related signals and substantially improves overall detection performance. Code is publicly available at https://github.com/DesoloYw/Automatic-Layer-Selection-for-Hallucination-Detection.git

Neural language models (LMs) can be used to evaluate the truth of factual statements in two ways: they can be either queried for statement probabilities, or probed for internal representations of truthfulness. Past work has found that these two procedures sometimes disagree, and that probes tend to be more accurate than LM outputs. This has led some researchers to conclude that LMs "lie" or otherwise encode non-cooperative communicative intents. Is this an accurate description of today's LMs, or can query-probe disagreement arise in other ways? We identify three different classes of disagreement, which we term confabulation, deception, and heterogeneity. In many cases, the superiority of probes is simply attributable to better calibration on uncertain answers rather than a greater fraction of correct, high-confidence answers. In some cases, queries and probes perform better on different subsets of inputs, and accuracy can further be improved by ensembling the two. Code is available at github.com/lingo-mit/lm-truthfulness.

Neural speech codecs are increasingly used as intermediate representations in codec-based speech generation systems. TiCodec introduces a factorized representation that separates time-varying speech content from time-invariant information through a Time-Invariant Representation Extraction (TIRE) module, potentially reducing the amount of information that must be modeled at the frame-level. In this work, we investigate the nature of the information captured by TIRE representations and their suitability for low-latency speech processing. Using a series of probing tasks, we analyze the influence of the encoder layer and show that intermediate layers capture complementary speaker- and environment-related information while containing little linguistic content. We further study several segment selection strategies for TIRE training and demonstrate that cross-file sampling improves the robustness of invariant representations. Based on these findings, we propose Dual-TIRE, a multi-level architecture that exploits the complementarity of different encoder layers and improves speech reconstruction quality and speaker similarity. Finally, we evaluate TiCodec in a streaming inference setting using successive 660ms processing blocks. Results show that streaming operation can be achieved without significant degradation in reconstruction performance, highlighting the potential of factorized neural codec representations for future low-latency speech generation systems.

Mixed-precision quantization must decide which parts of a model to keep at higher precision. A common premise, shared by sensitivity-based methods such as HAWQ and CoopQ, is that the loss from quantizing a set of layers can be reconstructed from per-layer or pairwise sensitivities measured in isolation. We test this premise at the 4-bit weight-and-activation precisions now being deployed, treating the change in loss f(S) from quantizing a layer set S as a set function on the Boolean cube and analyzing it through two classical changes of basis. This analysis yields two findings. First, across configurations drawn from the deployment distribution, 85--93\% of the variance of f is explained by per-layer effects alone. Second, a monotone transform of a sum of per-layer terms reproduces f's ranking of configurations, misordering at most 2\% of pairs. We propose the coverage model f(S)=cbigl(1-prod_{iin S}(1-a_i)bigr), which reproduces the measured variance profile of f to within a few percent from its L fitted break-rates. This structure supports two predictors of a configuration's loss, each with L+1 parameters. The additive model is the optimal first-order predictor. By Parseval's identity its mean-squared error equals the variance of f left unexplained by per-layer effects, which we measure on full lattices, estimate out of sample at full-network scale, and report with every result as a certificate of how well any additive model can do. The coverage model itself is the second predictor. As allocators at matched memory, they attain the lowest KL divergence among the compared allocators on models from 30B to 355B parameters. Below four bits, the resulting allocations continue to solve code and reasoning tasks at budgets where allocations from gradient sensitivities no longer produce terminating generations.

Deploying deep learning models on edge CPUs is bottlenecked by computational and memory constraints. Mixed-precision quantization promises to reduce inference latency while preserving accuracy. However, quantization affects different layer types in inconsistent ways, so identifying where accuracy loss is minimized and latency reduction is maximized is critical, as the effect accumulates over a full deployment into substantial savings or unacceptable task degradation. Such identification relies on sensitivity metrics, proxies that estimate layer-wise degradation without evaluating the task accuracy of every candidate policy. Nevertheless, widely used metrics fail systematically on modern architectures. We present a systematic empirical study of 13 sensitivity metrics for layer-wise INT8 quantization across four distinctly different neural networks, and validate the resulting policies on two ARM64 platforms. Gradient-based sensitivity methods fail on 4 out of 8 model-hardware configurations and weight-based statistics on 2. In contrast, the Jensen-Shannon Divergence achieves zero catastrophic failures, reliably isolating the layers that cannot be safely quantized. A sensitivity metric alone does not define a policy, and the fixed thresholds typically used for that step are fragile over the highly skewed distributions of modern architectures. We address this with K-Means clustering, achieving near-lossless accuracy and a mean speed-up of 1.81times over the full-precision model. Finally, we reveal that excluding from quantization the layers whose speed-up is negligible, regardless of their sensitivity, can be counterproductive, as it induces computational graph fragmentation and disables operator fusion. Our results yield concrete allocation policies for practitioners and researchers deploying quantized vision models on heterogeneous edge CPUs, without GPU access or gradient computation.

Although LiDAR semantic segmentation advances rapidly, state-of-the-art methods often incorporate specifically designed inductive bias derived from benchmarks originating from mechanical spinning LiDAR. This can limit model generalizability to other kinds of LiDAR technologies and make hyperparameter tuning more complex. To tackle these issues, we propose a generalized framework to accommodate various types of LiDAR prevalent in the market by replacing window-attention with our sparse focal point modulation. Our SFPNet is capable of extracting multi-level contexts and dynamically aggregating them using a gate mechanism. By implementing a channel-wise information query, features that incorporate both local and global contexts are encoded. We also introduce a novel large-scale hybrid-solid LiDAR semantic segmentation dataset for robotic applications. SFPNet demonstrates competitive performance on conventional benchmarks derived from mechanical spinning LiDAR, while achieving state-of-the-art results on benchmark derived from solid-state LiDAR. Additionally, it outperforms existing methods on our novel dataset sourced from hybrid-solid LiDAR. Code and dataset are available at https://github.com/Cavendish518/SFPNet and https://www.semanticindustry.top.

Advances in scaling down heterostructures and having an improved interface quality together with atomically-thin two-dimensional materials suggest a novel approach to systematically design materials. A given material can be transformed through proximity effects whereby it acquires properties of its neighbors, for example, becoming superconducting, magnetic, topologically nontrivial, or with an enhanced spin-orbit coupling. Such proximity effects not only complement the conventional methods of designing materials by doping or functionalization, but can also overcome their various limitations. In proximitized materials it is possible to realize properties that are not present in any constituent region of the considered heterostructure. While the focus is on magnetic and spin-orbit proximity effects with their applications in spintronics, the outlined principles provide also a broader framework for employing other proximity effects to tailor materials and realize novel phenomena.

We present a low-cost ultraviolet to infrared absolute quantum efficiency detector characterization system developed using commercial off-the-shelf components. The key components of the experiment include a light source,a regulated power supply, a monochromator, an integrating sphere, and a calibrated photodiode. We provide a step-by-step procedure to construct the photon and quantum efficiency transfer curves of imaging sensors. We present results for the GSENSE 2020 BSI CMOS sensor and the Sony IMX 455 BSI CMOS sensor. As a reference for similar characterizations, we provide a list of parts and associated costs along with images of our setup.

Recent diffusion-based approaches have made substantial progress in image layer decomposition. However, accurately decomposing complex natural images remains challenging due to difficulties in occlusion completion, robust layer disentanglement, and precise foreground boundaries. Moreover, the scarcity of high-quality multi-layer natural image datasets limits advancement. To address these challenges, we propose RevealLayer, a diffusion-based framework that decomposes an RGB image into multiple RGBA layers, enabling precise layer separation and reliable recovery of occluded content in natural images. RevealLayer incorporates three key components: (1) a Region-Aware Attention module to disentangle hidden and visible layers; (2) an Occlusion-Guided Adapter to leverage contextual information to enhance overlapping regions; and (3) a composite loss to enforce sharp alpha boundaries and suppress residual artifacts. To support training and evaluation, we introduce RevealLayer-100K, a high-quality multi-layer natural image constructed through a collaboration between automated algorithms and human annotation, and further establish RevealLayerBench for benchmarking layer decomposition in general natural scenes. Extensive experiments demonstrate that RevealLayer consistently outperforms existing approaches in layer decomposition.

Polarization imaging captures the polarization state of light, revealing information invisible to the human eye yet valuable in domains such as biomedical diagnostics, autonomous driving, and remote sensing. However, conventional polarization cameras are often expensive, bulky, or both, limiting their practical use. Lensless imaging offers a compact, low-cost alternative by replacing the lens with a simple optical element like a diffuser and performing computational reconstruction, but existing lensless polarization systems suffer from limited reconstruction quality. To overcome these limitations, we introduce a RGB-guided lensless polarization imaging system that combines a compact polarization-RGB sensor with an auxiliary, widely available conventional RGB camera providing structural guidance. We reconstruct multi-angle polarization images for each RGB color channel through a two-stage pipeline: a physics-based inversion recovers an initial polarization image, followed by a Transformer-based fusion network that refines this reconstruction using the RGB guidance image from the conventional RGB camera. Our two-stage method significantly improves reconstruction quality and fidelity over lensless-only baselines, generalizes across datasets and imaging conditions, and achieves high-quality real-world results on our physical prototype lensless camera without any fine-tuning.

Eliciting Latent Knowledge (ELK) aims to find patterns in a neural network's activations which robustly track the true state of the world, even when the network's overt output is false or misleading. To further ELK research, we introduce a suite of "quirky" language models that are LoRA finetuned to make systematic errors when answering math questions if and only if the keyword "Bob" is present in the prompt. We demonstrate that simple probing methods can elicit the model's latent knowledge of the correct answer in these contexts, even for problems harder than those the probe was trained on. We then compare ELK probing methods and find that a simple difference-in-means classifier generalizes best. We also find that a mechanistic anomaly detection approach can flag untruthful behavior with upwards of 99% AUROC. Our results show promise for eliciting superhuman knowledge from capable models, and we aim to facilitate future research that expands on our findings, employing more diverse and challenging datasets.

Large Language Models (LLMs) have impressive capabilities, but are prone to outputting falsehoods. Recent work has developed techniques for inferring whether a LLM is telling the truth by training probes on the LLM's internal activations. However, this line of work is controversial, with some authors pointing out failures of these probes to generalize in basic ways, among other conceptual issues. In this work, we use high-quality datasets of simple true/false statements to study in detail the structure of LLM representations of truth, drawing on three lines of evidence: 1. Visualizations of LLM true/false statement representations, which reveal clear linear structure. 2. Transfer experiments in which probes trained on one dataset generalize to different datasets. 3. Causal evidence obtained by surgically intervening in a LLM's forward pass, causing it to treat false statements as true and vice versa. Overall, we present evidence that at sufficient scale, LLMs linearly represent the truth or falsehood of factual statements. We also show that simple difference-in-mean probes generalize as well as other probing techniques while identifying directions which are more causally implicated in model outputs.

Tactile imaging seeks to reconstruct the internal structure of soft objects through touch sensing, with applications in medical diagnosis and robotic manipulation. Recent self-supervised learning approaches have shown promising results, but rely on global, unstructured representations and robot-controlled sensing, limiting generalization and practical use. We propose Local Encoder for Spatial Sensing (LESS), an object-centric tactile representation that exploits the local nature of touch. The tactile scene is modeled as a grid of recurrent encoders with local receptive fields, whose states are fused to reconstruct 2D or 3D images of internal structure. This compositional design enables strong generalization: models trained on single-inclusion phantoms accurately image objects with multiple inclusions and varying sizes. The local structure further supports spatial uncertainty estimation. In addition, we enable hand-held tactile imaging via external pose tracking and human-like palpation data, and extend tactile imaging to full 3D reconstruction.

A Transformer-based deep direct sampling method is proposed for electrical impedance tomography, a well-known severely ill-posed nonlinear boundary value inverse problem. A real-time reconstruction is achieved by evaluating the learned inverse operator between carefully designed data and the reconstructed images. An effort is made to give a specific example to a fundamental question: whether and how one can benefit from the theoretical structure of a mathematical problem to develop task-oriented and structure-conforming deep neural networks? Specifically, inspired by direct sampling methods for inverse problems, the 1D boundary data in different frequencies are preprocessed by a partial differential equation-based feature map to yield 2D harmonic extensions as different input channels. Then, by introducing learnable non-local kernels, the direct sampling is recast to a modified attention mechanism. The new method achieves superior accuracy over its predecessors and contemporary operator learners and shows robustness to noises in benchmarks. This research shall strengthen the insights that, despite being invented for natural language processing tasks, the attention mechanism offers great flexibility to be modified in conformity with the a priori mathematical knowledge, which ultimately leads to the design of more physics-compatible neural architectures.

The emergence of large-scale multi-modal generative models has drastically advanced artificial intelligence, introducing unprecedented levels of performance and functionality. However, optimizing these models remains challenging due to historically isolated paths of model-centric and data-centric developments, leading to suboptimal outcomes and inefficient resource utilization. In response, we present a novel sandbox suite tailored for integrated data-model co-development. This sandbox provides a comprehensive experimental platform, enabling rapid iteration and insight-driven refinement of both data and models. Our proposed "Probe-Analyze-Refine" workflow, validated through applications on state-of-the-art LLaVA-like and DiT based models, yields significant performance boosts, such as topping the VBench leaderboard. We also uncover fruitful insights gleaned from exhaustive benchmarks, shedding light on the critical interplay between data quality, diversity, and model behavior. With the hope of fostering deeper understanding and future progress in multi-modal data and generative modeling, our codes, datasets, and models are maintained and accessible at https://github.com/modelscope/data-juicer/blob/main/docs/Sandbox.md.

Energy Dispersive X-ray (EDX) tomography in Scanning Transmission Electron Microscopy (STEM) enables 3D compositional and elemental mapping at the nanoscale, but its use is limited by restricted tilt ranges and low-dose conditions required to avoid beam damage. Limited-angle acquisition introduces missing-wedge artefacts such as elongation and anisotropic resolution, while noisy low-dose data further degrade reconstruction quality and quantitative reliability. Here, we introduce an unsupervised deep learning framework based on Deep Image Prior with total variation regularization (DIP-TV) for limited-angle STEM-EDX tomography. We extend it to a multi-channel formulation (DIPm-TV) that jointly reconstructs multiple elemental maps by exploiting spatial correlations. Using a synthetic 3-channel phantom, we show that the method compensates for severe missing-wedge artefacts corresponding to approximately 100^circ of missing angular range under moderate noise, outperforming simultaneous iterative reconstruction technique and compressed sensing approaches. We apply the method to 3D chemical analysis of Ge-Sb-Te (GST) memory devices in virgin (as-fabricated) and SET (crystalline) operational states. Samples were prepared as cross-sectional focused ion beam lamellae and acquired under a limited-angle tilt range from -40^circ to +40^circ with 5^circ steps and a dose of 2.0times10^5 e^-/Ang^2. The multi-channel approach enables voxel-by-voxel elemental reconstruction using only EDX signals without external structural priors such as high-angle annular dark-field imaging. The reconstructed volumes show near-isotropic spatial resolution and reveal compositional heterogeneities associated with device operation. This approach enables 3D chemical characterization in experimentally accessible sample geometries where conventional methods fail due to severe angular limitations.

Despite their capabilities, Large Language Models (LLMs) remain opaque with limited understanding of their internal representations. Current interpretability methods, such as direct logit attribution (DLA) and sparse autoencoders (SAEs), provide restricted insight due to limitations such as the model's output vocabulary or unclear feature names. This work introduces Hyperdimensional Probe, a novel paradigm for decoding information from the LLM vector space. It combines ideas from symbolic representations and neural probing to project the model's residual stream into interpretable concepts via Vector Symbolic Architectures (VSAs). This probe combines the strengths of SAEs and conventional probes while overcoming their key limitations. We validate our decoding paradigm with controlled input-completion tasks, probing the model's final state before next-token prediction on inputs spanning syntactic pattern recognition, key-value associations, and abstract inference. We further assess it in a question-answering setting, examining the state of the model both before and after text generation. Our experiments show that our probe reliably extracts meaningful concepts across varied LLMs, embedding sizes, and input domains, also helping identify LLM failures. Our work advances information decoding in LLM vector space, enabling extracting more informative, interpretable, and structured features from neural representations.

Can we capture shape and reflectance in stealth? Such capability would be valuable for many application domains in vision, xR, robotics, and HCI. We introduce Structured Polarization, the first depth and reflectance sensing method using patterns of polarized light (SPIDeRS). The key idea is to modulate the angle of linear polarization (AoLP) of projected light at each pixel. The use of polarization makes it invisible and lets us recover not only depth but also directly surface normals and even reflectance. We implement SPIDeRS with a liquid crystal spatial light modulator (SLM) and a polarimetric camera. We derive a novel method for robustly extracting the projected structured polarization pattern from the polarimetric object appearance. We evaluate the effectiveness of SPIDeRS by applying it to a number of real-world objects. The results show that our method successfully reconstructs object shapes of various materials and is robust to diffuse reflection and ambient light. We also demonstrate relighting using recovered surface normals and reflectance. We believe SPIDeRS opens a new avenue of polarization use in visual sensing.

We introduce ByDeWay, a training-free framework designed to enhance the performance of Multimodal Large Language Models (MLLMs). ByDeWay uses a novel prompting strategy called Layered-Depth-Based Prompting (LDP), which improves spatial reasoning and grounding without modifying any model parameters. It segments the scene into closest, mid-range, and farthest layers using monocular depth estimation, then generates region-specific captions with a grounded vision-language model. These structured, depth-aware captions are appended to the image-question prompt, enriching it with spatial context. This guides MLLMs to produce more grounded and less hallucinated responses. Our method is lightweight, modular, and compatible with black-box MLLMs. Experiments on hallucination-sensitive (POPE) and reasoning-intensive (GQA) benchmarks show consistent improvements across multiple MLLMs, validating the effectiveness of depth-aware prompting in a zero-training setting.

Large vision-language models suffer from visual ungroundedness: they can produce a fluent, confident, and even correct response driven entirely by language priors, with the image contributing nothing to the prediction. Existing confidence estimation methods cannot detect this, as they observe model behavior under normal inference with no mechanism to determine whether a prediction was shaped by the image or by text alone. We introduce BICR (Blind-Image Contrastive Ranking), a model-agnostic confidence estimation framework that makes this contrast explicit during training by extracting hidden states from a frozen LVLM twice: once with the real image-question pair, and once with the image blacked out while the question is held fixed. A lightweight probe is trained on the real-image hidden state and regularized by a ranking loss that penalizes higher confidence on the blacked-out view, teaching it to treat visual grounding as a signal of reliability at zero additional inference cost. Evaluated across five modern LVLMs and seven baselines on a benchmark covering visual question answering, object hallucination detection, medical imaging, and financial document understanding, BICR achieves the best cross-LVLM average on both calibration and discrimination simultaneously, with statistically significant discrimination gains robust to cluster-aware analysis at 4-18x fewer parameters than the strongest probing baseline.

Large language models exhibit a puzzling inconsistency: they solve complex problems yet frequently fail on seemingly simpler ones. We investigate whether LLMs internally encode problem difficulty in a way that aligns with human judgment, and whether this representation tracks generalization during reinforcement learning post-training. We train linear probes across layers and token positions on 60 models, evaluating on mathematical and coding subsets of Easy2HardBench. We find that human-labeled difficulty is strongly linearly decodable (AMC: rho approx 0.88) and exhibits clear model-size scaling, whereas LLM-derived difficulty is substantially weaker and scales poorly. Steering along the difficulty direction reveals that pushing models toward "easier" representations reduces hallucination and improves accuracy. During GRPO training on Qwen2.5-Math-1.5B, the human-difficulty probe strengthens and positively correlates with test accuracy across training steps, while the LLM-difficulty probe degrades and negatively correlates with performance. These results suggest that human annotations provide a stable difficulty signal that RL amplifies, while automated difficulty estimates derived from model performance become misaligned precisely as models improve. We release probe code and evaluation scripts to facilitate replication.

Planar metasurfaces can profoundly control electromagnetic scattering. At microwave frequencies, such devices are typically implemented using multilayer cascades of patterned metallic sheets, whose design often requires time-consuming full-wave optimization. Here, we extend analytical models originally developed for sparse loaded-wire metagratings to accurately describe densely packed Jerusalem-cross meta-atoms embedded in standard printed circuit board (PCB) dielectric stacks. The model captures both near- and far-field coupling within and between layers, enabling efficient prediction of the dual-polarized response. Using this framework, we identify highly transmissive meta-atoms whose phase is controlled by the leg lengths of the Jerusalem crosses (microscopic design stage). This (phase)-(leg-length) "lookup table" allows rapid synthesis of Huygens' metasurfaces (macroscopic design stage), demonstrated through a full-wave-validated metalens exhibiting low-reflection beam manipulation. Notably, we implement a judicious scaling method to further extend the model to predict wideband meta-atom responses. In the companion paper (Part II), a hybrid machine-learning approach leverages this semianalytical framework to enhance accuracy without requiring the conventional exhaustive full-wave training, enabling ultrafast inverse design across the full parameter space. Overall, the presented methodology -- the standalone semianlytical scheme (Part I) and the machine-learning enhanced version (Part II) -- establishes an effective open-source toolkit for versatile, rapid, and highly accurate synthesis of fabrication-ready dual-polarized transmissive Huygens' meta-atoms and metasurfaces.

The study of twisted two-dimensional (2D) materials, where twisting layers create moiré superlattices, has opened new opportunities for investigating topological phases and strongly correlated physics. While systems such as twisted bilayer graphene (TBG) and twisted transition metal dichalcogenides (TMDs) have been extensively studied, the broader potential of a seemingly infinite set of other twistable 2D materials remains largely unexplored. In this paper, we define "theoretically twistable materials" as single- or multi-layer structures that allow for the construction of simple continuum models of their moiré structures. This excludes, for example, materials with a "spaghetti" of bands or those with numerous crossing points at the Fermi level, for which theoretical moiré modeling is unfeasible. We present a high-throughput algorithm that systematically searches for theoretically twistable semimetals and insulators based on the Topological 2D Materials Database. By analyzing key electronic properties, we identify thousands of new candidate materials that could host rich topological and strongly correlated phenomena when twisted. We propose representative twistable materials for realizing different types of moiré systems, including materials with different Bravais lattices, valleys, and strength of spin-orbital coupling. We provide examples of crystal growth for several of these materials and showcase twisted bilayer band structures along with simplified twisted continuum models. Our results significantly broaden the scope of moiré heterostructures and provide a valuable resource for future experimental and theoretical studies on novel moiré systems.

Multimodal industrial anomaly detection has largely focused on discrete products using strongly correlated RGB and 3D observations, leaving continuous process manufacturing and weakly correlated sensing modalities underexplored. We introduce LIBAD, the first multimodal anomaly detection benchmark for Li-ion battery electrode manufacturing. Collected from real roll-to-roll production lines, LIBAD provides aligned double-sided visible-light imaging, high-resolution X-ray radiography, and inline-compatible low-resolution X-ray radiography. Electrode patches in LIBAD exhibit highly homogeneous material appearance, while defect evidence can be strong in one modality but weak or absent in another, resulting in pronounced cross-modal anomaly inconsistency. Benchmarks of representative methods under the inline-compatible visible-light and low-resolution X-ray setting exhibit limited transferability and consistently high false-positive rates. We therefore propose DA-Core, a memory-based method that jointly considers feature-space coverage and local density of normal features during coreset selection, allowing compact memory banks to better preserve fine-grained normal variations. With a coreset ratio of 0.05, DA-Core reduces FPR95 from 60.4% to 54.3% compared with standard farthest point sampling. At this ratio, DA-Core also outperforms the best standard coreset result (obtained at 0.20) while reducing inference time by 43.9%. These results suggest that both the data distribution of normal features and the modality relationship itself require explicit consideration when designing anomaly detection methods for process manufacturing.

Transparent objects are common in daily life, and understanding their multi-layer depth information -- perceiving both the transparent surface and the objects behind it -- is crucial for real-world applications that interact with transparent materials. In this paper, we introduce LayeredDepth, the first dataset with multi-layer depth annotations, including a real-world benchmark and a synthetic data generator, to support the task of multi-layer depth estimation. Our real-world benchmark consists of 1,500 images from diverse scenes, and evaluating state-of-the-art depth estimation methods on it reveals that they struggle with transparent objects. The synthetic data generator is fully procedural and capable of providing training data for this task with an unlimited variety of objects and scene compositions. Using this generator, we create a synthetic dataset with 15,300 images. Baseline models training solely on this synthetic dataset produce good cross-domain multi-layer depth estimation. Fine-tuning state-of-the-art single-layer depth models on it substantially improves their performance on transparent objects, with quadruplet accuracy on our benchmark increased from 55.14% to 75.20%. All images and validation annotations are available under CC0 at https://layereddepth.cs.princeton.edu.

Verifying the final answer of a long reasoning trace may show that the trace is wrong but it does not distinguish three cases. The problem may lie beyond the model's capability, another attempt would succeed, or one step in an otherwise recoverable trace made the trace fail. Standard hidden-state probes are trained on final-answer correctness, a label that conflates these cases. Monte Carlo rollouts distinguish the cases and locate the failing step at additional inference cost. We test the hidden states of 4B and 8B reasoning models for the failure type and the failing step and compare each probe with the strongest baseline that uses no hidden states. On incorrect 8B traces, the confidence probe, a calibrated correctness probe at a midpoint cutoff, misses 81% of cases in which a single step makes the trace unrecoverable and 47% of cases in which another attempt would succeed. A probe with a different training design over the same states reverses the ordering of these two kinds of failure, so either ordering can be read from those states. At both scales, no single tested probe locates the failing step more accurately than a rule based only on trace length, and at 4B a probe trained to predict that step fails to outperform this rule in any of 10 runs on identical traces. The confidence probe therefore indicates that an answer is wrong, but its failure-type ordering depends on its training design.

Keyword-matching benchmarks can credit small models for tool use they never perform. We document such a false positive in a matched-architecture pair of Spanish security language models and propose a ladder of strict, cheap diagnostics. A 661.6M parameter model (approx. 65% code/technical text; no dedicated SFT) and a 1,109M model (web-heavy multi-phase curriculum; 6B-token tool-SFT) share decoder, tokenizer, and special tokens, scoring almost identically on lenient tool-use metrics (B4: 0.660 vs. 0.650). Verbatim-reproduction checks on training examples separate them completely: the 600M emits valid tool calls with generalized arguments on 6/6 examples; the 1B does so on 0/6 across checkpoints. A first-token probe localizes the 1B's failure to a missing prior (prob. 10^{-4}--10^{-5} on <|tool_call|>), which was erased by its web-heavy training phase. A targeted SFT recipe (diverse corpus, 5x higher learning rate, 2,202 steps, ~3.3 GPU-hours) repairs the 1B using three orders of magnitude fewer tokens than the failed phase. On all 269 corpus rows, valid emission rises from 0.100 to 0.959 (600M: 0.926). On 238 unseen prompts, the repaired 1B passes 0.536 vs. the 600M's 0.428 (p = 0.004). Embedding-drift checks show the repair did not move the trigger token's tied embedding (97.7% of the bf16 table remains bit-identical), meaning changes live in the surrounding network. Both models over-trigger, rarely answering negative prompts without a call (0.09 for 600M, 0.17 for repaired 1B). Factorial analyses confirm all repair configurations install the format, though suppression benefits from a diverse corpus remain a hypothesis due to seed sensitivity. This cheap diagnostic ladder costs minutes of CPU time and should gate tool-use claims on small models.

With the decreasing sizes of integrated-circuit components, the semiconductor industry is in growing need of high-throughput strain mapping techniques that offer high precision and spatial resolution, with desired industry goals of 0.01-0.1% and 1 nm respectively. As the fundamental limitation on the measurement precision is set by the Poisson noise, pixel array detectors with high saturation current, high dynamic range and fast readout are ideally suited for this purpose. However, due to the limited pixel count on these detectors, they do not work well with traditional strain mapping algorithms that were optimized to work on datasets with a large pixel count. Here, we evaluate the cepstral transform that was designed to address this problem, with the precision determined by the convergence, collection angles and dose while remaining insensitive to the pixel count. We test the performance of our method on silicon wedges and Si-SiGe multilayers, and using datasets collected at different conditions, we show how the measured strain precision scales as a function of dose, aperture size and sample thickness. Using precession gives a further improvement in precision by about 1.5-2x, whereas energy filtering does not have a significant impact on the cepstral method for device-relevant sample thickness ranges.

Multimodal LLMs are increasingly used to assist scientific peer review, where a core requirement is verifying whether claims in a paper are supported by its evidence. Prior work has shown that models perform substantially better at this task when the evidence is a table than when it is a chart of the same underlying data. This raises the question of whether models fail to extract information from charts, or do they extract it but fail to use it when forming their prediction? We study this question through layer-wise linear probing and attention analysis on three open-weight VLMs over table and chart evidence, representing the same underlying data. We find consistent evidence for the latter. Chart information is encoded in the models' intermediate representations but does not reach the prediction position, a gap that is absent for tables and holds across all conditions tested. Attention analysis further reveals that this disconnect takes two architecturally distinct forms across model families. These findings reframe the table-chart gap as a failure of how encoded visual information is routed at prediction time, rather than a failure of encoding itself.

Large Language Models (LLMs) are increasingly used in a variety of applications, but concerns around membership inference have grown in parallel. Previous efforts focus on black-to-grey-box models, thus neglecting the potential benefit from internal LLM information. To address this, we propose the use of Linear Probes (LPs) as a method to detect Membership Inference Attacks (MIAs) by examining internal activations of LLMs. Our approach, dubbed LUMIA, applies LPs layer-by-layer to get fine-grained data on the model inner workings. We test this method across several model architectures, sizes and datasets, including unimodal and multimodal tasks. In unimodal MIA, LUMIA achieves an average gain of 15.71 % in Area Under the Curve (AUC) over previous techniques. Remarkably, LUMIA reaches AUC>60% in 65.33% of cases -- an increment of 46.80% against the state of the art. Furthermore, our approach reveals key insights, such as the model layers where MIAs are most detectable. In multimodal models, LPs indicate that visual inputs can significantly contribute to detect MIAs -- AUC>60% is reached in 85.90% of experiments.

We propose Neural Field Thermal Tomography (NeFTY), a differentiable physics framework for the quantitative 3D reconstruction of material properties from transient surface temperature measurements. While traditional thermography relies on pixel-wise 1D approximations that neglect lateral diffusion, and soft-constrained Physics-Informed Neural Networks (PINNs) often fail in transient diffusion scenarios due to gradient stiffness, NeFTY parameterizes the 3D diffusivity field as a continuous neural field optimized through a rigorous numerical solver. By leveraging a differentiable physics solver, our approach enforces thermodynamic laws as hard constraints while maintaining the memory efficiency required for high-resolution 3D tomography. Our discretize-then-optimize paradigm effectively mitigates the spectral bias and ill-posedness inherent in inverse heat conduction, enabling the recovery of subsurface defects at arbitrary scales. Experimental validation on synthetic data demonstrates that NeFTY significantly improves the accuracy of subsurface defect localization over baselines. Additional details at https://cab-lab-princeton.github.io/nefty/