Daily Papers

Semantic-ID (SID) tokenizers are increasingly reused as standalone artifacts in generative recommendation: an exported item-to-code mapping becomes the address space that a later sequence generator must use. These mappings rarely come with a common inspection interface, so coverage gaps, full-code aliasing, behaviorally weak prefixes, tail compression, and prefix fan-out are often found only after downstream training. We present SIDInspector, a mapping-first diagnostic resource for SID tokenizer artifacts. SIDInspector defines a small adapter contract over item mappings, metadata, interactions, and optional generator traces; validates the contract; and reports mapping-level probes for utilization, aliasing, neighborhood alignment, popularity allocation, and structural cost, with hooks for temporal churn and generator traces. SIDInspector characterizes exported mappings independently of downstream leaderboard scores. The release covers four tokenizer lines: GRID-style RQ-KMeans under two capacity settings and a bounded ReSID/GAOQ export in a same-item Musical protocol, plus released LETTER and LC-Rec item-index artifacts. In that protocol, D2 aliasing falls from 0.977 to 0.779 under added GRID-style capacity and to 0.000 for ReSID/GAOQ, while D3 remains below a deterministic category-prefix control (0.055-0.154 versus 0.447). SIDInspector exposes capacity, addressability, and behavioral prefix alignment as distinct artifact properties before method-level evaluation. Additional domain checks show the same diagnostic distinction. Bounded fixed-reranker probes connect prefix alignment to candidate exposure, while final ranking quality remains a downstream model question.

Large language models (LLMs) achieve promising performance, yet their ability to reason remains poorly understood. Existing evaluations largely emphasize task-level accuracy, often conflating pattern matching with reasoning capability. We present X-RAY, an explainable reasoning analysis system that maps the LLM reasoning capability using calibrated, formally verified probes. We model reasoning capability as a function of extractable structure, operationalized through formal properties such as constraint interaction, reasoning depth, and solution-space geometry. X-Ray generates probes via formal tools with controlled structural variations, enabling precise isolation of incremental structural information through formal calibration and verification. We evaluate state-of-the-art LLMs on problems ranging from junior-level to advanced in mathematics, physics, and chemistry. Our analysis reveals a systematic asymmetry in LLM reasoning: models are relatively robust to constraint refinement, where additional conditions shrink an existing solution space, but degrade sharply under solution-space restructuring, where modifications alter the underlying structural form of the solution manifold. Moreover, calibrated formal probes differentiate models that appear indistinguishable on standard benchmarks and reveal failure modes that are structurally interpretable rather than opaque. Beyond evaluation, our framework is contamination-free and supports the training and testing of reasoning models.

The rapid evolution of generative technologies necessitates reliable methods for detecting AI-generated images. A critical limitation of current detectors is their failure to generalize to images from unseen generative models, as they often overfit to source-specific semantic cues rather than learning universal generative artifacts. To overcome this, we introduce a simple yet remarkably effective pixel-level mapping pre-processing step to disrupt the pixel value distribution of images and break the fragile, non-essential semantic patterns that detectors commonly exploit as shortcuts. This forces the detector to focus on more fundamental and generalizable high-frequency traces inherent to the image generation process. Through comprehensive experiments on GAN and diffusion-based generators, we show that our approach significantly boosts the cross-generator performance of state-of-the-art detectors. Extensive analysis further verifies our hypothesis that the disruption of semantic cues is the key to generalization.

As fine-tuning becomes impractical at scale, probing is emerging as the preferred evaluation protocol. However, standard linear probing can understate the capability of models whose pre-training optimizes local representations rather than an explicit global representation. This motivates attentive probing, an alternative that uses attention to selectively aggregate patch-level features. Despite growing adoption, attentive probing is still underexplored: existing approaches are often over-parameterized and computationally inefficient. In this work, we revisit attentive probing through the lens of the accuracy vs. parameter-efficiency trade-off. We present the first comprehensive study of existing methods, analyzing their design choices and benchmarking their performance. Building on these insights, we propose efficient probing (EP), a lightweight yet effective multi-query cross-attention mechanism that eliminates redundant projections and reduces the number of trainable parameters. Across multiple benchmarks and pre-training paradigms, EP consistently outperforms linear probing and previous attentive probing methods, and remains effective when combined with parameter-efficient fine-tuning. Beyond evaluation, our analysis uncovers emerging properties of EP, including complementary attention maps, which open new directions for leveraging probing beyond protocol design. Project page: https://vrg.fel.cvut.cz/ep/.

Probing studies what information is encoded in a frozen LLM's layer representations by training a lightweight predictor on top of them. Beyond analysis, probes are often used operationally in probe-then-steer pipelines: a learned concept vector is extracted from a probe and injected via additive activation steering by adding it to a layer representation during the forward pass. The effectiveness of this pipeline hinges on estimating concept vectors that are accurate, directionally stable under ablation, and inexpensive to obtain. Motivated by these desiderata, we propose RAPTOR (Ridge-Adaptive Logistic Probe), a simple L2-regularized logistic probe whose validation-tuned ridge strength yields concept vectors from normalized weights. Across extensive experiments on instruction-tuned LLMs and human-written concept datasets, RAPTOR matches or exceeds strong baselines in accuracy while achieving competitive directional stability and substantially lower training cost; these quantitative results are supported by qualitative downstream steering demonstrations. Finally, using the Convex Gaussian Min-max Theorem (CGMT), we provide a mechanistic characterization of ridge logistic regression in an idealized Gaussian teacher-student model in the high-dimensional few-shot regime, explaining how penalty strength mediates probe accuracy and concept-vector stability and yielding structural predictions that qualitatively align with trends observed on real LLM embeddings.

Frontier language model capabilities are improving rapidly. We thus need stronger mitigations against bad actors misusing increasingly powerful systems. Prior work has shown that activation probes may be a promising misuse mitigation technique, but we identify a key remaining challenge: probes fail to generalize under important production distribution shifts. In particular, we find that the shift from short-context to long-context inputs is difficult for existing probe architectures. We propose several new probe architecture that handle this long-context distribution shift. We evaluate these probes in the cyber-offensive domain, testing their robustness against various production-relevant shifts, including multi-turn conversations, static jailbreaks, and adaptive red teaming. Our results demonstrate that while multimax addresses context length, a combination of architecture choice and training on diverse distributions is required for broad generalization. Additionally, we show that pairing probes with prompted classifiers achieves optimal accuracy at a low cost due to the computational efficiency of probes. These findings have informed the successful deployment of misuse mitigation probes in user-facing instances of Gemini, Google's frontier language model. Finally, we find early positive results using AlphaEvolve to automate improvements in both probe architecture search and adaptive red teaming, showing that automating some AI safety research is already possible.

Large language models(LLMs) excel at text generation and knowledge question-answering tasks, but they are prone to generating hallucinated content, severely limiting their application in high-risk domains. Current hallucination detection methods based on uncertainty estimation and external knowledge retrieval suffer from the limitation that they still produce erroneous content at high confidence levels and rely heavily on retrieval efficiency and knowledge coverage. In contrast, probe methods that leverage the model's hidden-layer states offer real-time and lightweight advantages. However, traditional linear probes struggle to capture nonlinear structures in deep semantic spaces.To overcome these limitations, we propose a neural network-based framework for token-level hallucination detection. By freezing language model parameters, we employ lightweight MLP probes to perform nonlinear modeling of high-level hidden states. A multi-objective joint loss function is designed to enhance detection stability and semantic disambiguity. Additionally, we establish a layer position-probe performance response model, using Bayesian optimization to automatically search for optimal probe insertion layers and achieve superior training results.Experimental results on LongFact, HealthBench, and TriviaQA demonstrate that MLP probes significantly outperform state-of-the-art methods in accuracy, recall, and detection capability under low false-positive conditions.

Prior work uses linear probes on benchmark prompts as evidence of evaluation awareness in large language models. Because evaluation context is typically entangled with benchmark format and genre, it is unclear whether probe-based signals reflect context or surface structure. We test whether these signals persist under partial control of prompt format using a controlled 2x2 dataset and diagnostic rewrites. We find that probes primarily track benchmark-canonical structure and fail to generalize to free-form prompts independent of linguistic style. Thus, standard probe-based methodologies do not reliably disentangle evaluation context from structural artifacts, limiting the evidential strength of existing results.

Monitoring is an important aspect of safely deploying Large Language Models (LLMs). This paper examines activation probes for detecting ``high-stakes'' interactions -- where the text indicates that the interaction might lead to significant harm -- as a critical, yet underexplored, target for such monitoring. We evaluate several probe architectures trained on synthetic data, and find them to exhibit robust generalization to diverse, out-of-distribution, real-world data. Probes' performance is comparable to that of prompted or finetuned medium-sized LLM monitors, while offering computational savings of six orders-of-magnitude. These savings are enabled by reusing activations of the model that is being monitored. Our experiments also highlight the potential of building resource-aware hierarchical monitoring systems, where probes serve as an efficient initial filter and flag cases for more expensive downstream analysis. We release our novel synthetic dataset and the codebase at https://github.com/arrrlex/models-under-pressure.

Spatial intelligence requires visual representations that capture both semantic objects and geometric structure in the physical world. To support this, two major pre-training schemes are now widely used as foundation backbones: Vision-Language Models (VLMs), which use language supervision to align visual observations with semantic concepts, and Video Generation Models (VGMs), which learn from temporally evolving visual worlds. However, it still remains unclear which pre-training scheme provides a better representation substrate for spatial intelligence. In this paper, we present the first systematic frozen-feature probing study of VLMs and VGMs across three representative axes of spatial intelligence: semantic tagging, instance grouping, and 3D geometry prediction. Using the lightweight probe, our framework enables a controlled comparison of what information is already encoded in frozen representations from two model families. Experimental results reveal a clear complementarity: VLMs are stronger at semantic tagging and instance grouping, while VGMs provide more accessible signals for dense geometry and camera motion. Moreover, a naive fusion of the two already yields a representation that excels at both geometry and semantics, suggesting a promising direction for building stronger spatial-intelligence backbones by effectively integrating features from both model families. Our code is available at https://github.com/om-ai-lab/Probing-VLM-VGM{https://github.com/om-ai-lab/Probing-VLM-VGM}.

Emotional talking-head generation has emerged as a pivotal research area at the intersection of computer vision and multimodal artificial intelligence, with its core value lying in enhancing human-computer interaction through immersive and empathetic engagement.With the advancement of multimodal large language models, the driving signals for emotional talking-head generation has shifted from audio and video to more flexible text. However, current text-driven methods rely on predefined discrete emotion label texts, oversimplifying the dynamic complexity of real facial muscle movements and thus failing to achieve natural emotional expressiveness.This study proposes the Think-Before-Draw framework to address two key challenges: (1) In-depth semantic parsing of emotions--by innovatively introducing Chain-of-Thought (CoT), abstract emotion labels are transformed into physiologically grounded facial muscle movement descriptions, enabling the mapping from high-level semantics to actionable motion features; and (2) Fine-grained expressiveness optimization--inspired by artists' portrait painting process, a progressive guidance denoising strategy is proposed, employing a "global emotion localization--local muscle control" mechanism to refine micro-expression dynamics in generated videos.Our experiments demonstrate that our approach achieves state-of-the-art performance on widely-used benchmarks, including MEAD and HDTF. Additionally, we collected a set of portrait images to evaluate our model's zero-shot generation capability.

Self-supervised geospatial foundation models (GeoFMs) learn transferable representations from remote sensing data, but their downstream behavior is difficult to characterize. We study six representative GeoFMs spanning joint-embedding, reconstruction, and multimodal pretraining families, and evaluate transfer across classification, regression, and segmentation benchmarks under different label availability and downstream pipelines. We find that model rankings change across tasks and adaptation settings. Layerwise probing shows that, in most cases, task-relevant information is more accessible in intermediate transformer blocks compared to final-layer embeddings, and that GeoFMs exhibit distinct depthwise profiles. In segmentation case studies on PASTIS and Sen1Floods11, downstream adaptation settings such as decoder design and fine-tuning can be as impactful as the choice of GeoFM, and standard dense-prediction heads may be poorly aligned with how GeoFMs organize information over depth. Finally, CKA analysis on case studies shows that fine-tuning does not rewrite GeoFMs uniformly across depth, and the strongest changes are localized to the first linear layer of the MLP in ViT blocks. These results help explain why GeoFM rankings shift across benchmarks and motivate more representation-aware evaluation and adaptation strategies.

Deploying large language models in user-facing systems requires efficient output safety filtering. Existing approaches typically rely on a separate moderation model applied after generation, which doubles inference cost and only detects violations after generation completes. We observe that the signal needed for moderation is already present in the model hidden states. Based on this, we train lightweight token-level probes that operate directly on internal activations, producing per-token safety scores that can be aggregated for both offline evaluation and online intervention. The probe reuses activations from the generator and requires no additional forward pass, enabling sub millisecond per-token safety checks inside the decoding loop. A probe applied to a single mid layer recovers most decisions of a strong guard model, acting as a low cost surrogate optimized for latency rather than accuracy. In streaming settings, it can halt or modify unsafe outputs before they are fully generated, replacing end of sequence moderation with continuous token level monitoring. Compared to post hoc and streaming guard models, our method achieves orders of magnitude lower compute overhead with minimal latency cost. We also provide a practical deployment recipe, including layer selection, aggregation strategy, probing frequency, and triggering thresholds. Finally, we show that the probe linear component corresponds to a direction in residual space, enabling both detection and activation steering at negligible cost.

Mapping is crucial for spatial reasoning, planning and robot navigation. Existing approaches range from metric, which require precise geometry-based optimization, to purely topological, where image-as-node based graphs lack explicit object-level reasoning and interconnectivity. In this paper, we propose a novel topological representation of an environment based on "image segments", which are semantically meaningful and open-vocabulary queryable, conferring several advantages over previous works based on pixel-level features. Unlike 3D scene graphs, we create a purely topological graph with segments as nodes, where edges are formed by a) associating segment-level descriptors between pairs of consecutive images and b) connecting neighboring segments within an image using their pixel centroids. This unveils a "continuous sense of a place", defined by inter-image persistence of segments along with their intra-image neighbours. It further enables us to represent and update segment-level descriptors through neighborhood aggregation using graph convolution layers, which improves robot localization based on segment-level retrieval. Using real-world data, we show how our proposed map representation can be used to i) generate navigation plans in the form of "hops over segments" and ii) search for target objects using natural language queries describing spatial relations of objects. Furthermore, we quantitatively analyze data association at the segment level, which underpins inter-image connectivity during mapping and segment-level localization when revisiting the same place. Finally, we show preliminary trials on segment-level `hopping' based zero-shot real-world navigation. Project page with supplementary details: oravus.github.io/RoboHop/

In most Vision-Language models (VL), the understanding of the image structure is enabled by injecting the position information (PI) about objects in the image. In our case study of LXMERT, a state-of-the-art VL model, we probe the use of the PI in the representation and study its effect on Visual Question Answering. We show that the model is not capable of leveraging the PI for the image-text matching task on a challenge set where only position differs. Yet, our experiments with probing confirm that the PI is indeed present in the representation. We introduce two strategies to tackle this: (i) Positional Information Pre-training and (ii) Contrastive Learning on PI using Cross-Modality Matching. Doing so, the model can correctly classify if images with detailed PI statements match. Additionally to the 2D information from bounding boxes, we introduce the object's depth as new feature for a better object localization in the space. Even though we were able to improve the model properties as defined by our probes, it only has a negligible effect on the downstream performance. Our results thus highlight an important issue of multimodal modeling: the mere presence of information detectable by a probing classifier is not a guarantee that the information is available in a cross-modal setup.

Large Language Models (LLMs) can comply with harmful instructions, raising serious safety concerns despite their impressive capabilities. Recent work has leveraged probing-based approaches to study the separability of malicious and benign inputs in LLMs' internal representations, and researchers have proposed using such probing methods for safety detection. We systematically re-examine this paradigm. Motivated by poor out-of-distribution performance, we hypothesize that probes learn superficial patterns rather than semantic harmfulness. Through controlled experiments, we confirm this hypothesis and identify the specific patterns learned: instructional patterns and trigger words. Our investigation follows a systematic approach, progressing from demonstrating comparable performance of simple n-gram methods, to controlled experiments with semantically cleaned datasets, to detailed analysis of pattern dependencies. These results reveal a false sense of security around current probing-based approaches and highlight the need to redesign both models and evaluation protocols, for which we provide further discussions in the hope of suggesting responsible further research in this direction. We have open-sourced the project at https://github.com/WangCheng0116/Why-Probe-Fails.

Probing is widely adopted in computer vision to faithfully evaluate self-supervised learning (SSL) embeddings, as finetuning may misrepresent their inherent quality. In contrast, audio SSL models still rely on finetuning because simple probing fails to unlock their full potential and alters their rankings when competing on AudioSet. Hence, a robust and efficient probing mechanism is required to guide the trajectory of audio SSL towards reliable and reproducible methods. We introduce Convex Gated Probing (CGP), a prototype-based method that significantly closes the gap between finetuning and probing in audio. CGP efficiently utilizes all frozen layers via a gating mechanism and exposes the location of latent task-relevant information. Guided by CGP as a reliable post-hoc evaluation probe, we rework the entire SSL pipeline of current best performing audio models that use legacy implementations of prior SSL methods. By refining data preprocessing, model architecture, and pretraining recipe, we introduce Better Audio Transformer (BAT), and establish new SOTA on audio benchmarks.

Given that visual foundation models (VFMs) are trained on extensive datasets but often limited to 2D images, a natural question arises: how well do they understand the 3D world? With the differences in architecture and training protocols (i.e., objectives, proxy tasks), a unified framework to fairly and comprehensively probe their 3D awareness is urgently needed. Existing works on 3D probing suggest single-view 2.5D estimation (e.g., depth and normal) or two-view sparse 2D correspondence (e.g., matching and tracking). Unfortunately, these tasks ignore texture awareness, and require 3D data as ground-truth, which limits the scale and diversity of their evaluation set. To address these issues, we introduce Feat2GS, which readout 3D Gaussians attributes from VFM features extracted from unposed images. This allows us to probe 3D awareness for geometry and texture via novel view synthesis, without requiring 3D data. Additionally, the disentanglement of 3DGS parameters - geometry (x, alpha, Sigma) and texture (c) - enables separate analysis of texture and geometry awareness. Under Feat2GS, we conduct extensive experiments to probe the 3D awareness of several VFMs, and investigate the ingredients that lead to a 3D aware VFM. Building on these findings, we develop several variants that achieve state-of-the-art across diverse datasets. This makes Feat2GS useful for probing VFMs, and as a simple-yet-effective baseline for novel-view synthesis. Code and data will be made available at https://fanegg.github.io/Feat2GS/.

Parallel thinking has emerged as a promising paradigm for reasoning, yet it imposes significant computational burdens. Existing efficiency methods primarily rely on local, per-trajectory signals and lack principled mechanisms to exploit global dynamics across parallel branches. We introduce 2D probing, an interface that exposes the width-depth dynamics of parallel thinking by periodically eliciting intermediate answers from all branches. Our analysis reveals three key insights: non-monotonic scaling across width-depth allocations, heterogeneous reasoning branch lengths, and early stabilization of global consensus. Guided by these insights, we introduce Parallel-Probe, a training-free controller designed to optimize online parallel thinking. Parallel-Probe employs consensus-based early stopping to regulate reasoning depth and deviation-based branch pruning to dynamically adjust width. Extensive experiments across three benchmarks and multiple models demonstrate that Parallel-Probe establishes a superior Pareto frontier for test-time scaling. Compared to standard majority voting, it reduces sequential tokens by up to 35.8% and total token cost by over 25.8% while maintaining competitive accuracy.

Representing and navigating hierarchy is a fundamental primitive of reasoning. Large language models have demonstrated proficiency in a wide variety of tasks requiring hierarchical reasoning, but there exists limited analysis on how the models geometrically represent the necessary latent constructions for such thinking. To this end, we develop H-probes, a collection of linear probes that extract hierarchical structure, specifically depth and pairwise distance, from latent representations. In synthetic tree traversal tasks, the H-probes robustly find the subspaces containing hierarchical structure necessary to complete the tasks; furthermore, in comprehensive ablation experiments, we show that these hierarchy-containing subspaces are low-dimensional, causally important for high task performance, and generalize within- and out-of-domain. Furthermore, we find analogous, though weaker, hierarchical structure in real-world hierarchical contexts such as mathematical reasoning traces. These results demonstrate that models represent hierarchy not only at the level of syntax and concepts, but at deeper levels of abstraction -- including the reasoning process itself.

Recent attacks show that behavioural unlearning of large language models leaves internal traces recoverable by adversarial probes. We characterise where this retention lives and show it can be surgically removed without measurable capability cost. Our central protocol is a leave-one-out cross-sequence probe that tests whether a memorisation signature generalises across held-out sequences. The signature is real and consistent across scale: memorisation-specific gaps of +0.32, +0.19, +0.30 on Pythia-70M, GPT-2 medium, and Mistral-7B; on Pythia-70M, the random-initialisation control collapses to -0.04 at the deepest layer where the pretrained signature peaks. The probe direction is causally separable from recall -- projecting it out collapses the signature locally (+0.44 -> -0.19) while behavioural recall barely changes -- and a probe trained on naturally memorised content does not classify fine-tuning-injected secrets, marking two representationally distinct regimes. We then introduce probe-geometry alignment (PGA), a surgical erasure that aligns activations along the probe's live readout direction at each depth. PGA drives the cross-sequence probe below random chance at all four scales tested (toy depth-4: 0.17; Pythia-70M: 0.07; Mistral-7B: 0.45; GPT-2 medium: 0.06 via MD-PGA k=2) and remains robust to six adversarial probe variants. Against a re-fitting attacker who trains a fresh probe on PGA-treated activations, we extend PGA adversarially, defeating the re-fit probe at every memorisation-relevant depth while preserving five zero-shot capability benchmarks within 2.8 percentage points per task (mean Δacc = +0.2pp). The cross-sequence signature is a real, causally separable, regime-specific property of pretrained representations -- removable below chance with a single rank-one intervention per depth at no measurable capability cost.

Ultra-high-resolution (UHR) remote-sensing (RS) imagery provides fine-grained Earth-observation evidence over city-scale scenes, but poses a fundamental challenge for multimodal large language models (MLLMs): task-relevant evidence is often sparse, local, and spatially dispersed across extremely large visual contexts. A natural solution is to equip MLLMs with zoom-in tools for active local inspection. However, through a pilot study on XLRS-Bench, we find that zoom-in is only partially effective: it resolves easy and medium-level tasks with locally recoverable evidence, but saturates on hard cases requiring global search, multi-region comparison, path planning, or dispersed-evidence reasoning. Motivated by this finding, we move beyond single-tool zoom-in and introduce GeoMTVR, a large-scale Geospatial Multi-Tool Visual Reasoning dataset built from wide-area satellite imagery. GeoMTVR contains 13K UHR VQA samples with interleaved reasoning trajectories, diverse visual tool calls, and returned visual observations, enabling models to learn question decomposition, tool selection, regional inspection, object-level grounding, auxiliary visual reasoning, and cross-tool evidence integration. Beyond supervised fine-tuning, we propose a tool-attention-focused reinforcement learning algorithm that concentrates optimization on critical tool-use decisions, including when to invoke tools, which tool to select, where to apply it, and how to interpret tool outputs. By combining SFT on GeoMTVR with our RL algorithm, we develop GeoLens, a multi-tool visual reasoning MLLM for UHR RS. Experiments show that GeoLens consistently outperforms direct reasoning and single-tool zoom-in baselines, achieving stronger accuracy, better evidence grounding, and more efficient tool-use trajectories.

Decoder-only Transformer models such as GPT have demonstrated superior performance in text generation, by autoregressively predicting the next token. However, the performance of GPT is bounded by low compute-to-memory-ratio and high memory access. Throughput-oriented architectures such as GPUs target parallel processing rather than sequential token generation, and are not efficient for GPT acceleration, particularly on-device inference applications. Process-in-memory (PIM) architectures can significantly reduce data movement and provide high computation parallelism, and are promising candidates to accelerate GPT inference. In this work, we propose PIM-GPT that aims to achieve high throughput, high energy efficiency and end-to-end acceleration of GPT inference. PIM-GPT leverages DRAM-based PIM solutions to perform multiply-accumulate (MAC) operations on the DRAM chips, greatly reducing data movement. A compact application-specific integrated chip (ASIC) is designed and synthesized to initiate instructions to PIM chips and support data communication along with necessary arithmetic computations. At the software level, the mapping scheme is designed to maximize data locality and computation parallelism by partitioning a matrix among DRAM channels and banks to utilize all in-bank computation resources concurrently. We develop an event-driven clock-cycle accurate simulator to validate the efficacy of the proposed PIM-GPT architecture. Overall, PIM-GPT achieves 41-137times, 631-1074times speedup and 339-1085times, 890-1632times energy efficiency over GPU and CPU baseline, respectively, on 8 GPT models with up to 1.4 billion parameters.

Automated Aerial Triangulation (AAT), aiming to restore image pose and reconstruct sparse points simultaneously, plays a pivotal role in earth observation. With its rich research heritage spanning several decades in photogrammetry, AAT has evolved into a fundamental process widely applied in large-scale Unmanned Aerial Vehicle (UAV) based mapping. Despite its advancements, classic AAT methods still face challenges like low efficiency and limited robustness. This paper introduces DeepAAT, a deep learning network designed specifically for AAT of UAV imagery. DeepAAT considers both spatial and spectral characteristics of imagery, enhancing its capability to resolve erroneous matching pairs and accurately predict image poses. DeepAAT marks a significant leap in AAT's efficiency, ensuring thorough scene coverage and precision. Its processing speed outpaces incremental AAT methods by hundreds of times and global AAT methods by tens of times while maintaining a comparable level of reconstruction accuracy. Additionally, DeepAAT's scene clustering and merging strategy facilitate rapid localization and pose determination for large-scale UAV images, even under constrained computing resources. The experimental results demonstrate DeepAAT's substantial improvements over conventional AAT methods, highlighting its potential in the efficiency and accuracy of UAV-based 3D reconstruction tasks. To benefit the photogrammetry society, the code of DeepAAT will be released at: https://github.com/WHU-USI3DV/DeepAAT.

Focusing on the task of point-to-point navigation for an autonomous driving vehicle, we propose a novel deep learning model trained with end-to-end and multi-task learning manners to perform both perception and control tasks simultaneously. The model is used to drive the ego vehicle safely by following a sequence of routes defined by the global planner. The perception part of the model is used to encode high-dimensional observation data provided by an RGBD camera while performing semantic segmentation, semantic depth cloud (SDC) mapping, and traffic light state and stop sign prediction. Then, the control part decodes the encoded features along with additional information provided by GPS and speedometer to predict waypoints that come with a latent feature space. Furthermore, two agents are employed to process these outputs and make a control policy that determines the level of steering, throttle, and brake as the final action. The model is evaluated on CARLA simulator with various scenarios made of normal-adversarial situations and different weathers to mimic real-world conditions. In addition, we do a comparative study with some recent models to justify the performance in multiple aspects of driving. Moreover, we also conduct an ablation study on SDC mapping and multi-agent to understand their roles and behavior. As a result, our model achieves the highest driving score even with fewer parameters and computation load. To support future studies, we share our codes at https://github.com/oskarnatan/end-to-end-driving.

Large language models (LLMs) demonstrate strong code generation abilities in general-purpose programming languages but remain limited in specialized domains such as low-level embedded systems programming. This domain involves hardware register manipulation, vendor-specific SDKs, real-time operating system APIs, and hardware abstraction layers that are underrepresented in standard pretraining corpora. We introduce H2LooP Spark Preview, a continual pretraining (CPT) pipeline that adapts the OLMo-3-7B-a fully open language model to the embedded systems domain using BF16 LoRA with rank-stabilized scaling on 8 NVIDIA H100 GPUs. Our training corpus is constructed from repository-datasheet pairs covering 100B tokens of raw embedded systems data across 117 manufacturers, processed using the hierarchical datasheet-to-code mapping approach proposed in SpecMap (Nipane et al., 2026). The resulting curated dataset split contains 23.5B tokens across 13 embedded domains. Continual pretraining with high-rank LoRA (r=512) yields substantial gains, reducing in-domain perplexity by 70.4% and held-out repository perplexity by 66.1%. On generative code completion benchmarks spanning 13 embedded domains, our 7B model outperforms Claude Opus 4.6 and Qwen3-Coder-30B on 8 categories in token accuracy, showing that targeted continual pretraining enables smaller open-weight models to rival frontier systems on specialized technical tasks. We release the production training checkpoint on Huggingface as an open-source artifact.

Routing has emerged as a promising strategy for balancing performance and cost in large language model (LLM) systems that combine lightweight models with powerful but expensive large models. Recent studies show that probe routing, which predicts the correctness of a small model using its hidden states, provides an effective solution in text-only LLMs. However, we observe that these probes degrade substantially when applied to multimodal LLMs (MLLMs). Through empirical analysis, we find that the presence of visual inputs weakens the separability of correctness signals in hidden states, making them harder to extract using standard probe designs. To address this challenge, we introduce two complementary approaches for improving probe routing in MLLMs. First, we propose the Attention Probe, which aggregates hidden states from the preceding layer based on attention scores to recover distributed correctness signals. Second, we present the KL-Regularized LoRA Probe (ReLope), which inserts a lightweight LoRA adapter and applies a KL regularizer to learn routing-aware representations. Comprehensive experiments show that our methods consistently outperform baselines, suggesting that improving the quality of hidden states is key to effective routing in MLLMs. Our code is available at https://github.com/Spinozaaa/ReLope.

With the increasing resolution of remote sensing imagery (RSI), large-size RSI has emerged as a vital data source for high-precision vector mapping of geographic objects. Existing methods are typically constrained to processing small image patches, which often leads to the loss of contextual information and produces fragmented vector outputs. To address these, this paper introduces HoliTracer, the first framework designed to holistically extract vectorized geographic objects from large-size RSI. In HoliTracer, we enhance segmentation of large-size RSI using the Context Attention Net (CAN), which employs a local-to-global attention mechanism to capture contextual dependencies. Furthermore, we achieve holistic vectorization through a robust pipeline that leverages the Mask Contour Reformer (MCR) to reconstruct polygons and the Polygon Sequence Tracer (PST) to trace vertices. Extensive experiments on large-size RSI datasets, including buildings, water bodies, and roads, demonstrate that HoliTracer outperforms state-of-the-art methods. Our code and data are available in https://github.com/vvangfaye/HoliTracer.

Maps are fundamental medium to visualize and represent the real word in a simple and 16 philosophical way. The emergence of the 3rd wave information has made a proportion of maps are available to be generated ubiquitously, which would significantly enrich the dimensions and perspectives to understand the characteristics of the real world. However, a majority of map dataset have never been discovered, acquired and effectively used, and the map data used in many applications might not be completely fitted for the authentic demands of these applications. This challenge is emerged due to the lack of numerous well-labelled benchmark datasets for implementing the deep learning approaches into identifying complicated map content. Thus, we develop a large-scale benchmark dataset that includes well-labelled dataset for map text annotation recognition, map scene classification, map super-resolution reconstruction, and map style transferring. Furthermore, these well-labelled datasets would facilitate the state-of-the-art machine intelligence technologies to conduct map feature detection, map pattern recognition and map content retrieval. We hope our efforts would be useful for AI-enhanced cartographical applications.

Sophisticated instrumentation for AI systems might have indicators that signal misalignment from human values, not unlike a "check engine" light in cars. One such indicator of misalignment is deceptiveness in generated responses. Future AI instrumentation may have the ability to detect when an LLM generates deceptive responses while reasoning about seemingly plausible but incorrect answers to factual questions. In this work, we demonstrate that linear probes on LLMs internal activations can detect deception in their responses with extremely high accuracy. Our probes reach a maximum of greater than 90% accuracy in distinguishing between deceptive and non-deceptive arguments generated by llama and qwen models ranging from 1.5B to 14B parameters, including their DeepSeek-r1 finetuned variants. We observe that probes on smaller models (1.5B) achieve chance accuracy at detecting deception, while larger models (greater than 7B) reach 70-80%, with their reasoning counterparts exceeding 90%. The layer-wise probe accuracy follows a three-stage pattern across layers: near-random (50%) in early layers, peaking in middle layers, and slightly declining in later layers. Furthermore, using an iterative null space projection approach, we find multitudes of linear directions that encode deception, ranging from 20 in Qwen 3B to nearly 100 in DeepSeek 7B and Qwen 14B models.

Visual Simultaneous Localization and Mapping (VSLAM) research faces significant challenges due to fragmented toolchains, complex system configurations, and inconsistent evaluation methodologies. To address these issues, we present VSLAM-LAB, a unified framework designed to streamline the development, evaluation, and deployment of VSLAM systems. VSLAM-LAB simplifies the entire workflow by enabling seamless compilation and configuration of VSLAM algorithms, automated dataset downloading and preprocessing, and standardized experiment design, execution, and evaluation--all accessible through a single command-line interface. The framework supports a wide range of VSLAM systems and datasets, offering broad compatibility and extendability while promoting reproducibility through consistent evaluation metrics and analysis tools. By reducing implementation complexity and minimizing configuration overhead, VSLAM-LAB empowers researchers to focus on advancing VSLAM methodologies and accelerates progress toward scalable, real-world solutions. We demonstrate the ease with which user-relevant benchmarks can be created: here, we introduce difficulty-level-based categories, but one could envision environment-specific or condition-specific categories.

This paper introduces the Manifold Probe, a supervised method for discovering representation manifolds in superposition. The method generalizes linear regression probes by learning the space of features of a concept that can be linearly predicted from the representations, and then learning the directions used to encode them. We demonstrate the probe on representations of time and space in Llama 2-7b, finding manifolds which linearly represent an interpretable set of features in each case. In the case of time, we show that by steering along the manifold, we can influence the model's completions about the years in which famous songs, movies and books were released, providing evidence that the Manifold Probe can discover manifolds which are causally involved in model behaviour.

This work examines whether activating latent subspaces in language models (LLMs) can steer scientific code generation toward a specific programming language. Five causal LLMs were first evaluated on scientific coding prompts to quantify their baseline bias among four programming languages. A static neuron-attribution method, perturbing the highest activated MLP weight for a C++ or CPP token, proved brittle and exhibited limited generalization across prompt styles and model scales. To address these limitations, a gradient-refined adaptive activation steering framework (G-ACT) was developed: per-prompt activation differences are clustered into a small set of steering directions, and lightweight per-layer probes are trained and refined online to select the appropriate steering vector. In LLaMA-3.2 3B, this approach reliably biases generation towards the CPP language by increasing the average probe classification accuracy by 15% and the early layers (0-6) improving the probe classification accuracy by 61.5% compared to the standard ACT framework. For LLaMA-3.3 70B, where attention-head signals become more diffuse, targeted injections at key layers still improve language selection. Although per-layer probing introduces a modest inference overhead, it remains practical by steering only a subset of layers and enables reproducible model behavior. These results demonstrate a scalable, interpretable and efficient mechanism for concept-level control for practical agentic systems.

The number of publicly available models is rapidly increasing, yet most remain undocumented. Users looking for suitable models for their tasks must first determine what each model does. Training machine learning models to infer missing documentation directly from model weights is challenging, as these weights often contain significant variation unrelated to model functionality (denoted nuisance). Here, we identify a key property of real-world models: most public models belong to a small set of Model Trees, where all models within a tree are fine-tuned from a common ancestor (e.g., a foundation model). Importantly, we find that within each tree there is less nuisance variation between models. Concretely, while learning across Model Trees requires complex architectures, even a linear classifier trained on a single model layer often works within trees. While effective, these linear classifiers are computationally expensive, especially when dealing with larger models that have many parameters. To address this, we introduce Probing Experts (ProbeX), a theoretically motivated and lightweight method. Notably, ProbeX is the first probing method specifically designed to learn from the weights of a single hidden model layer. We demonstrate the effectiveness of ProbeX by predicting the categories in a model's training dataset based only on its weights. Excitingly, ProbeX can map the weights of Stable Diffusion into a weight-language embedding space, enabling model search via text, i.e., zero-shot model classification.

Mechanistic interpretability aims to understand neural networks by identifying which learned features mediate specific behaviors. Attribution graphs reveal these feature pathways, but interpreting them requires extensive manual analysis -- a single prompt can take approximately 2 hours for an experienced circuit tracer. We present probe prompting, an automated pipeline that transforms attribution graphs into compact, interpretable subgraphs built from concept-aligned supernodes. Starting from a seed prompt and target logit, we select high-influence features, generate concept-targeted yet context-varying probes, and group features by cross-prompt activation signatures into Semantic, Relationship, and Say-X categories using transparent decision rules. Across five prompts including classic "capitals" circuits, probe-prompted subgraphs preserve high explanatory coverage while compressing complexity (Completeness 0.83, mean across circuits; Replacement 0.54). Compared to geometric clustering baselines, concept-aligned groups exhibit higher behavioral coherence: 2.3x higher peak-token consistency (0.425 vs 0.183) and 5.8x higher activation-pattern similarity (0.762 vs 0.130), despite lower geometric compactness. Entity-swap tests reveal a layerwise hierarchy: early-layer features transfer robustly (64% transfer rate, mean layer 6.3), while late-layer Say-X features specialize for output promotion (mean layer 16.4), supporting a backbone-and-specialization view of transformer computation. We release code (https://github.com/peppinob-ol/attribution-graph-probing), an interactive demo (https://huggingface.co/spaces/Peppinob/attribution-graph-probing), and minimal artifacts enabling immediate reproduction and community adoption.

With the increasing numbers of publicly available models, there are probably pretrained, online models for most tasks users require. However, current model search methods are rudimentary, essentially a text-based search in the documentation, thus users cannot find the relevant models. This paper presents ProbeLog, a method for retrieving classification models that can recognize a target concept, such as "Dog", without access to model metadata or training data. Differently from previous probing methods, ProbeLog computes a descriptor for each output dimension (logit) of each model, by observing its responses on a fixed set of inputs (probes). Our method supports both logit-based retrieval ("find more logits like this") and zero-shot, text-based retrieval ("find all logits corresponding to dogs"). As probing-based representations require multiple costly feedforward passes through the model, we develop a method, based on collaborative filtering, that reduces the cost of encoding repositories by 3x. We demonstrate that ProbeLog achieves high retrieval accuracy, both in real-world and fine-grained search tasks and is scalable to full-size repositories.

This article presents a comprehensive review of and analysis of state-of-the-art mapping algorithms for UAV (Unmanned Aerial Vehicle) applications, focusing on canopy-level and high-speed scenarios. This article presents a comprehensive exploration of sensor technologies suitable for UAV mapping, assessing their capabilities to provide measurements that meet the requirements of fast UAV mapping. Furthermore, the study conducts extensive experiments in a simulated environment to evaluate the performance of three distinct mapping algorithms: Direct Sparse Odometry (DSO), Stereo DSO (SDSO), and DSO Lite (DSOL). The experiments delve into mapping accuracy and mapping speed, providing valuable insights into the strengths and limitations of each algorithm. The results highlight the versatility and shortcomings of these algorithms in meeting the demands of modern UAV applications. The findings contribute to a nuanced understanding of UAV mapping dynamics, emphasizing their applicability in complex environments and high-speed scenarios. This research not only serves as a benchmark for mapping algorithm comparisons but also offers practical guidance for selecting sensors tailored to specific UAV mapping applications.

Linear probes are widely used in interpretability research and often compared by cosine similarity. The Mahalanobis cosine similarity (MCS) between two directions, which reweights the inner product by test data covariance, is a natural task-aware refinement. Ying et al. (2026) report that a probe's MCS to a reference probe trained on the out-of-distribution (OOD) data near-perfectly linearly predicts the probe's OOD AUROC (R^2 = 0.98). Here, we extend this empirical finding across models, layers, and concept domains, and prove this general phenomenon in closed form: For balanced classes whose projections are Gaussian, OOD AUROC and MCS to the reference probe are linear because both are sigmoid-shaped functions of the probe's signal-to-noise ratio (SNR) on the test data. The theory also predicts when this linearity fails, which we verify empirically. MCS offers a theoretically grounded and empirically effective alternative to Euclidean cosine similarity for comparing linear probes.

Causal graphs provide a high-level language for making mechanisms transparent. Recent work uses Large Language Models (LLMs) to recover causal graphs of external-world processes. Instead, in this paper, we use causal graphs to model LLM inference itself, providing stakeholders with a transparent view of how the model perceives and organizes high-level concepts to produce a prediction. We propose a four-phase method for constructing such graphs. Given a target LLM and a set of textual examples, our method discovers class-discriminative, human-interpretable concepts and maps each input to LLM-perceived concept states. We then introduce an MCMC-inspired counterfactual augmentation procedure that expands the sparse observational data through chains of counterfactuals. This enables stable causal discovery with σ-CG, yielding informative, interpretable graphs. We apply our method to three LLMs across disease diagnosis, sentiment analysis, and LLM-as-a-judge classification tasks. We evaluate the learned graphs for predictive fidelity and structural stability, and the MCMC-inspired augmentation for convergence and downstream utility. Our results show that the discovered causal graphs capture meaningful dependencies consistent with LLMs' reasoning. Together, this paper provides a foundation for concept-level explainability of LLMs.

AI evaluation is undergoing a structural change. Large language models (LLMs) are increasingly deployed as systems that act over time through tools, environments, users, and other agents, while many evaluation practices still inherit assumptions from response-centered benchmarks (e.g., fixed inputs, isolated outputs, and outcome judgments that can be made from a single response). The field has begun to build interactive benchmarks, but the resulting landscape is fragmented: benchmarks differ in what interaction artifacts they admit, how trajectories are scored, and what claims their results support. This position paper argues that interactive evaluation should be treated as a principled evaluation paradigm, not merely a new family of agent benchmarks. Simply adopting previous evaluation paradigms does not suffice. We define evaluation as an autonomous mapping from evidence to judgments, and show that interactive evaluation changes both sides of this mapping: the evidence becomes interaction-generated trajectories, while the evaluation procedure must assess process, recoverability, coordination, robustness, and system-level performance. Building on this definition, we propose a two-axis taxonomy, derive design principles and reporting standards, examine representative scenarios, and analyze how longstanding evaluation challenges reappear at the trajectory level.

Semantic SLAM (Simultaneous Localization and Mapping) systems enrich robot maps with structural and semantic information, enabling robots to operate more effectively in complex environments. However, these systems struggle in real-world scenarios with occlusions, incomplete data, or ambiguous geometries, as they cannot fully leverage the higher-level spatial and semantic knowledge humans naturally apply. We introduce HICS-SLAM, a Human-in-the-Loop semantic SLAM framework that uses a shared extended reality environment for real-time collaboration. The system allows human operators to directly interact with and visualize the robot's 3D scene graph, and add high-level semantic concepts (e.g., rooms or structural entities) into the mapping process. We propose a graph-based semantic fusion methodology that integrates these human interventions with robot perception, enabling scalable collaboration for enhanced situational awareness. Experimental evaluations on real-world construction site datasets demonstrate improvements in room detection accuracy, map precision, and semantic completeness compared to automated baselines, demonstrating both the effectiveness of the approach and its potential for future extensions.

Web search provides a promising way for people to obtain information and has been extensively studied. With the surgence of deep learning and large-scale pre-training techniques, various neural information retrieval models are proposed and they have demonstrated the power for improving search (especially, the ranking) quality. All these existing search methods follow a common paradigm, i.e. index-retrieve-rerank, where they first build an index of all documents based on document terms (i.e., sparse inverted index) or representation vectors (i.e., dense vector index), then retrieve and rerank retrieved documents based on similarity between the query and documents via ranking models. In this paper, we explore a new paradigm of information retrieval with neither sparse nor dense index but only a model. Specifically, we propose a pre-training model-based IR system called DynamicRetriever. As for this system, the training stage embeds the token-level and document-level information (especially, document identifiers) of the corpus into the model parameters, then the inference stage directly generates document identifiers for a given query. Compared with existing search methods, the model-based IR system has two advantages: i) it parameterizes the traditional static index with a pre-training model, which converts the document semantic mapping into a dynamic and updatable process; ii) with separate document identifiers, it captures both the term-level and document-level information for each document. Extensive experiments conducted on the public search benchmark MS MARCO verify the effectiveness and potential of our proposed new paradigm for information retrieval.

Recent advances in multimodal large language models(MLLMs) have led to remarkable progress in visual grounding, enabling fine-grained cross-modal alignment between textual queries and image regions. However, transferring such capabilities to remote sensing imagery remains challenging, as targets are often extremely small within kilometer-scale scenes, and queries typically involve intricate geospatial relations such as relative positions, spatial hierarchies, or contextual dependencies across distant objects. To address these challenges, we propose GeoViS, a Geospatially Rewarded Visual Search framework that reformulates remote sensing visual grounding as a progressive search-and-reasoning process. Rather than directly predicting the target location in a single step, GeoViS actively explores the global image through a tree-structured sequence of visual cues, integrating multimodal perception, spatial reasoning, and reward-guided exploration to refine geospatial hypotheses iteratively. This design enables the model to detect subtle small-scale targets while maintaining holistic scene awareness. Extensive experiments on five remote sensing grounding benchmarks demonstrate that GeoViS achieves precise geospatial understanding and consistently surpasses existing methods across key visual grounding metrics, highlighting its strong cross-domain generalization and interpretability.

Standard representation probing for visual models relies on mathematically permutation-invariant operations like Global Average Pooling (GAP) or CLS tokens, treating patch representations as an unstructured bag-of-words. We challenge this paradigm by demonstrating that token order is a critical, exploitable dimension in frozen visual representations (e.g., MAE, BEiT, DINOv2, and ViT as CLS-ablation extreme). We propose SSMProbe, a probing framework driven by a State Space Model (SSM). Operating as discrete Linear Time-Invariant (LTI) dynamical systems, SSMs act as permutation-sensitive probes where sequence order strictly dictates the final state due to inherent memory decay. Formulating token ordering as an information scheduling problem, we compare fixed scan heuristics against a differentiable soft permutation (Sinkhorn-based) learned from downstream supervision. Evaluations on standard and fine-grained classification benchmarks reveal a striking order gap: while fixed scans fail dramatically on highly localized patch features, our learned soft permutation successfully extracts highly competitive performance from otherwise heavily localized patch sequences. We find that pre-training objectives fundamentally shape token structure: DINOv2 concentrates global semantics in optimized CLS tokens leaving patches hyperspecialized, pure MAE preserves distributed representations with heterogeneous patch informativeness, and ViT represents a supervised CLS-dominated extreme. BEiT occupies middle ground. This heterogeneity is order-dependent -- meaning the SSM probe's performance depends critically on which tokens are placed at which temporal positions -- and is not merely a topological property of the spatial grid. SSMProbe's learned routing effectively discovers and exploits this heterogeneity, offering a powerful new diagnostic lens for visual representation analysis.

Linear probes are a promising approach for monitoring AI systems for deceptive behaviour. Previous work has shown that a linear classifier trained on a contrastive instruction pair and a simple dataset can achieve good performance. However, these probes exhibit notable failures even in straightforward scenarios, including spurious correlations and false positives on non-deceptive responses. In this paper, we identify the importance of the instruction pair used during training. Furthermore, we show that targeting specific deceptive behaviors through a human-interpretable taxonomy of deception leads to improved results on evaluation datasets. Our findings reveal that instruction pairs capture deceptive intent rather than content-specific patterns, explaining why prompt choice dominates probe performance (70.6% of variance). Given the heterogeneity of deception types across datasets, we conclude that organizations should design specialized probes targeting their specific threat models rather than seeking a universal deception detector.

Tool-augmented LLM agents tend to call tools indiscriminately, even when the model can answer directly. Each unnecessary call wastes API fees and latency, yet no existing benchmark systematically studies when a tool call is actually needed. We propose When2Tool, a benchmark of 18 environments (15 single-hop, 3 multi-hop) spanning three categories of tool necessity -- computational scale, knowledge boundaries, and execution reliability -- each with controlled difficulty levels that create a clear decision boundary between tool-necessary and tool-unnecessary tasks. We evaluate two families of training-free baselines: Prompt-only (varying the prompt to discourage unnecessary calls) and Reason-then-Act (requiring the model to reason about tool necessity before acting). Both provide limited control: Prompt-only suppresses necessary calls alongside unnecessary ones, and Reason-then-Act still incurs a disproportionate accuracy cost on hard tasks. To understand why these baselines fail, we probe the models' hidden states and find that tool necessity is linearly decodable from the pre-generation representation with AUROC 0.89--0.96 across six models, substantially exceeding the model's own verbalized reasoning. This reveals that models already know when tools are needed, but fail to act on this knowledge during generation. Building on this finding, we propose Probe&Prefill, which uses a lightweight linear probe to read the hidden-state signal and prefills the model's response with a steering sentence. Across all models tested, Probe&Prefill reduces tool calls by 48% with only 1.7% accuracy loss, while the best baseline at comparable accuracy only reduces 6% of tool calls, or achieves a similar tool call reduction but incurs a 5times higher accuracy loss. Our code is available at https://github.com/Trustworthy-ML-Lab/when2tool

In this article, we use probing to investigate phenomena that occur during fine-tuning and knowledge distillation of a BERT-based natural language understanding (NLU) model. Our ultimate purpose was to use probing to better understand practical production problems and consequently to build better NLU models. We designed experiments to see how fine-tuning changes the linguistic capabilities of BERT, what the optimal size of the fine-tuning dataset is, and what amount of information is contained in a distilled NLU based on a tiny Transformer. The results of the experiments show that the probing paradigm in its current form is not well suited to answer such questions. Structural, Edge and Conditional probes do not take into account how easy it is to decode probed information. Consequently, we conclude that quantification of information decodability is critical for many practical applications of the probing paradigm.

The emergence of large-scale multi-modal generative models has drastically advanced artificial intelligence, introducing unprecedented levels of performance and functionality. However, optimizing these models remains challenging due to historically isolated paths of model-centric and data-centric developments, leading to suboptimal outcomes and inefficient resource utilization. In response, we present a novel sandbox suite tailored for integrated data-model co-development. This sandbox provides a comprehensive experimental platform, enabling rapid iteration and insight-driven refinement of both data and models. Our proposed "Probe-Analyze-Refine" workflow, validated through applications on state-of-the-art LLaVA-like and DiT based models, yields significant performance boosts, such as topping the VBench leaderboard. We also uncover fruitful insights gleaned from exhaustive benchmarks, shedding light on the critical interplay between data quality, diversity, and model behavior. With the hope of fostering deeper understanding and future progress in multi-modal data and generative modeling, our codes, datasets, and models are maintained and accessible at https://github.com/modelscope/data-juicer/blob/main/docs/Sandbox.md.

Despite their capabilities, Large Language Models (LLMs) remain opaque with limited understanding of their internal representations. Current interpretability methods, such as direct logit attribution (DLA) and sparse autoencoders (SAEs), provide restricted insight due to limitations such as the model's output vocabulary or unclear feature names. This work introduces Hyperdimensional Probe, a novel paradigm for decoding information from the LLM vector space. It combines ideas from symbolic representations and neural probing to project the model's residual stream into interpretable concepts via Vector Symbolic Architectures (VSAs). This probe combines the strengths of SAEs and conventional probes while overcoming their key limitations. We validate our decoding paradigm with controlled input-completion tasks, probing the model's final state before next-token prediction on inputs spanning syntactic pattern recognition, key-value associations, and abstract inference. We further assess it in a question-answering setting, examining the state of the model both before and after text generation. Our experiments show that our probe reliably extracts meaningful concepts across varied LLMs, embedding sizes, and input domains, also helping identify LLM failures. Our work advances information decoding in LLM vector space, enabling extracting more informative, interpretable, and structured features from neural representations.

GUI grounding, the task of mapping natural-language instructions to pixel coordinates, is crucial for autonomous agents, yet remains difficult for current VLMs. The core bottleneck is reliable patch-to-pixel mapping, which breaks when extrapolating to high-resolution displays unseen during training. Current approaches generate coordinates as text tokens directly from visual features, forcing the model to infer complex position-to-pixel mappings implicitly; as a result, accuracy degrades and failures proliferate on new resolutions. We address this with two complementary innovations. First, RULER tokens serve as explicit coordinate markers, letting the model reference positions similar to gridlines on a map and adjust rather than generate coordinates from scratch. Second, Interleaved MRoPE (I-MRoPE) improves spatial encoding by ensuring that width and height dimensions are represented equally, addressing the asymmetry of standard positional schemes. Experiments on ScreenSpot, ScreenSpot-V2, and ScreenSpot-Pro show consistent gains in grounding accuracy, with the largest improvements on high-resolution interfaces. By providing explicit spatial guidance rather than relying on implicit learning, our approach enables more reliable GUI automation across diverse resolutions and platforms.

As Retrieval-Augmented Generation (RAG) shifts toward diverse portfolio generation, it is stymied by two critical bottlenecks: flawed measurement of evidence utilization, and suboptimal context budget allocation. We resolve both sequentially. To resolve measurement, we expose a pervasive ``diagnostic illusion'': standard relevance proxies fail catastrophically on hard negatives. We replace them with an efficient causal leave-one-out probe that accurately isolates generative reliance and formally calibrates the structural dilution of LLM attention. To resolve allocation, we deploy this causal probe in a deconfounded factorial grid. We prove that the prevailing strategy of monolithic context widening is an architectural trap penalized by relevance decay. Instead, allocating compute iteratively across multiple sequential generations drives transformative portfolio recall gains of 16.7--20.5 absolute percentage points, scaling robustly up to 32B models. Finally, we unify these solutions into a deployable closed-loop submodular scheduler. Augmented by an attribution-steered contrastive decoder to override LLM attention inertia, our architecture systematically forces fresh evidence integration. By dominating classical open-loop baselines, we establish sequential, feedback-driven orchestration as the definitive paradigm for generative search. Our code, data, and causal measurement instruments are available at https://github.com/PeiYangLiu/ascp.

Linear probes trained on LLM activations are increasingly proposed as deception-detection metrics, yet report AUROC exceeding 0.96 on clean benchmarks while collapsing under distributional shift. This paper systematically pressure-tests probe-based metrics across the Gemma 3 model family (1B-27B parameters), diagnosing why they fail rather than merely documenting that they fail. We test four hypotheses about deception encoding: (1) single linear direction, (2) multi-dimensional subspace, (3) convex conic hull, (4) entropy proxy. Our design includes cross-domain transfer matrices, multi-dimensional probe analysis with permutation null baselines, entropy-residualization tests, and distractor evaluations across 8 stylistic shifts. We find that: (a) probes achieve near-perfect AUROC (>=0.998) on clean data but collapse under stylistic shifts; style-augmented probes recover near-perfect detection (mean AUROC 0.979-0.983) on unseen styles; (b) the single-direction hypothesis is rejected (k=1 captures only 0.61-0.80 AUROC), with cross-domain transfer failure confirmed as geometric rather than layer-mismatch-driven; (c) the entropy-proxy hypothesis is rejected (max |rho|=0.454, max Delta-AUROC after residualization=0.004); and (d) deception does not form a significant linear subspace (per-domain k*=0), yet multi-dimensional probes (k>=5) recover the signal through distributed sub-threshold features. Probe fragility reflects distributional narrowness rather than an architectural limitation: style-augmented probes recover near-perfect detection at both 4B and 27B, establishing that the inverse scaling pattern is a training-distribution artifact rather than a genuine scale-dependent phenomenon.

Most object-level mapping systems in use today make use of an upstream learned object instance segmentation model. If we want to teach them about a new object or segmentation class, we need to build a large dataset and retrain the system. To build spatial AI systems that can quickly be taught about new objects, we need to effectively solve the problem of single-shot object detection, instance segmentation and re-identification. So far there is neither a method fulfilling all of these requirements in unison nor a benchmark that could be used to test such a method. Addressing this, we propose ISAR, a benchmark and baseline method for single- and few-shot object Instance Segmentation And Re-identification, in an effort to accelerate the development of algorithms that can robustly detect, segment, and re-identify objects from a single or a few sparse training examples. We provide a semi-synthetic dataset of video sequences with ground-truth semantic annotations, a standardized evaluation pipeline, and a baseline method. Our benchmark aligns with the emerging research trend of unifying Multi-Object Tracking, Video Object Segmentation, and Re-identification.

The deployment of automated pavement defect detection is often hindered by poor cross-domain generalization. Supervised detectors achieve strong in-domain accuracy but require costly re-annotation for new environments, while standard self-supervised methods capture generic features and remain vulnerable to domain shift. We propose \ours, a self-supervised framework that visually probes target domains without labels. \ours introduces a Self-supervised Prompt Enhancement Module (SPEM), which derives defect-aware prompts from unlabeled target data to guide a frozen ViT backbone, and a Domain-Aware Prompt Alignment (DAPA) objective, which aligns prompt-conditioned source and target representations. Experiments on four challenging benchmarks show that \ours consistently outperforms strong supervised, self-supervised, and adaptation baselines, achieving robust zero-shot transfer, improved resilience to domain variations, and high data efficiency in few-shot adaptation. These results highlight self-supervised prompting as a practical direction for building scalable and adaptive visual inspection systems. Source code is publicly available: https://github.com/xixiaouab/PROBE/tree/main

Large Language Models (LLMs) excel at tasks like language processing, strategy games, and reasoning but struggle to build generalizable internal representations essential for adaptive decision-making in agents. For agents to effectively navigate complex environments, they must construct reliable world models. While LLMs perform well on specific benchmarks, they often fail to generalize, leading to brittle representations that limit their real-world effectiveness. Understanding how LLMs build internal world models is key to developing agents capable of consistent, adaptive behavior across tasks. We analyze OthelloGPT, a GPT-based model trained on Othello gameplay, as a controlled testbed for studying representation learning. Despite being trained solely on next-token prediction with random valid moves, OthelloGPT shows meaningful layer-wise progression in understanding board state and gameplay. Early layers capture static attributes like board edges, while deeper layers reflect dynamic tile changes. To interpret these representations, we compare Sparse Autoencoders (SAEs) with linear probes, finding that SAEs offer more robust, disentangled insights into compositional features, whereas linear probes mainly detect features useful for classification. We use SAEs to decode features related to tile color and tile stability, a previously unexamined feature that reflects complex gameplay concepts like board control and long-term planning. We study the progression of linear probe accuracy and tile color using both SAE's and linear probes to compare their effectiveness at capturing what the model is learning. Although we begin with a smaller language model, OthelloGPT, this study establishes a framework for understanding the internal representations learned by GPT models, transformers, and LLMs more broadly. Our code is publicly available: https://github.com/ALT-JS/OthelloSAE.

Multimodal remote sensing image (MRSI) matching is pivotal for cross-modal fusion, localization, and object detection, but it faces severe challenges due to geometric, radiometric, and viewpoint discrepancies across imaging modalities. Existing unimodal datasets lack scale and diversity, limiting deep learning solutions. This paper proposes MapGlue, a universal MRSI matching framework, and MapData, a large-scale multimodal dataset addressing these gaps. Our contributions are twofold. MapData, a globally diverse dataset spanning 233 sampling points, offers original images (7,000x5,000 to 20,000x15,000 pixels). After rigorous cleaning, it provides 121,781 aligned electronic map-visible image pairs (512x512 pixels) with hybrid manual-automated ground truth, addressing the scarcity of scalable multimodal benchmarks. MapGlue integrates semantic context with a dual graph-guided mechanism to extract cross-modal invariant features. This structure enables global-to-local interaction, enhancing descriptor robustness against modality-specific distortions. Extensive evaluations on MapData and five public datasets demonstrate MapGlue's superiority in matching accuracy under complex conditions, outperforming state-of-the-art methods. Notably, MapGlue generalizes effectively to unseen modalities without retraining, highlighting its adaptability. This work addresses longstanding challenges in MRSI matching by combining scalable dataset construction with a robust, semantics-driven framework. Furthermore, MapGlue shows strong generalization capabilities on other modality matching tasks for which it was not specifically trained. The dataset and code are available at https://github.com/PeihaoWu/MapGlue.

Neural implicit representations are drawing a lot of attention from the robotics community recently, as they are expressive, continuous and compact. However, city-scale continual implicit dense mapping based on sparse LiDAR input is still an under-explored challenge. To this end, we successfully build a city-scale continual neural mapping system with a panoptic representation that consists of environment-level and instance-level modelling. Given a stream of sparse LiDAR point cloud, it maintains a dynamic generative model that maps 3D coordinates to signed distance field (SDF) values. To address the difficulty of representing geometric information at different levels in city-scale space, we propose a tailored three-layer sampling strategy to dynamically sample the global, local and near-surface domains. Meanwhile, to realize high fidelity mapping of instance under incomplete observation, category-specific prior is introduced to better model the geometric details. We evaluate on the public SemanticKITTI dataset and demonstrate the significance of the newly proposed three-layer sampling strategy and panoptic representation, using both quantitative and qualitative results. Codes and model will be publicly available.

We propose ActiveSplat, an autonomous high-fidelity reconstruction system leveraging Gaussian splatting. Taking advantage of efficient and realistic rendering, the system establishes a unified framework for online mapping, viewpoint selection, and path planning. The key to ActiveSplat is a hybrid map representation that integrates both dense information about the environment and a sparse abstraction of the workspace. Therefore, the system leverages sparse topology for efficient viewpoint sampling and path planning, while exploiting view-dependent dense prediction for viewpoint selection, facilitating efficient decision-making with promising accuracy and completeness. A hierarchical planning strategy based on the topological map is adopted to mitigate repetitive trajectories and improve local granularity given limited time budgets, ensuring high-fidelity reconstruction with photorealistic view synthesis. Extensive experiments and ablation studies validate the efficacy of the proposed method in terms of reconstruction accuracy, data coverage, and exploration efficiency. The released code will be available on our project page: https://li-yuetao.github.io/ActiveSplat/.

Although topological mapping and navigation have been studied extensively, the specific role and downstream effect of loop closures in purely topological representations has received relatively little attention. Importantly, loop closure over topological maps is distinct from loop closure over globally referenced trajectories and metric maps. Building on recent denser topologies grounded in pixel-level, relative 3D geometry, we propose PixelLoop which introduces loop closures directly in pixel space. Unlike sparse image-level edges or pose-graph corrections in SLAM, our pixel-level closures act as dense topological shortcuts that alter planning connectivity and cost propagation rather than merely aligning coordinates. This dense connectivity enables stable any-point-to-any-point navigation and produces costmaps that align accurately with geometric shortest paths. In particular, we showcase the distinct advantage of applying loop closures to fine-grained pixel topologies rather than image-level topologies. Across extensive simulated experiments, PixelLoop achieves over 35% absolute improvement in both Success Rate and SPL compared to image-relative baselines, with the largest gains in scenarios requiring shortcut exploitation. Results are further validated through real-world mobile robot deployments, demonstrating that dense pixel-level loop closures provide a practical and robust foundation for topological visual navigation. Project Page: https://pixelloop-nav.github.io/

Robotic mapping systems typically approach building metric-semantic scene representations from the robot's own sensors and cameras. However, these "first person" maps inherit the robot's own limitations due to its embodiment or skillset, which may leave many aspects of the environment unexplored. For example, the robot might not be able to open drawers or access wall cabinets. In this sense, the map representation is not as complete, and requires a more capable robot to fill in the gaps. We narrow these blind spots in current methods by leveraging egocentric data captured as a human naturally explores a scene wearing Project Aria glasses, giving a way to directly transfer knowledge about articulation from the human to any deployable robot. We demonstrate that, by using simple heuristics, we can leverage egocentric data to recover models of articulate object parts, with quality comparable to those of state-of-the-art methods based on other input modalities. We also show how to integrate these models into 3D scene graph representations, leading to a better understanding of object dynamics and object-container relationships. We finally demonstrate that these articulated 3D scene graphs enhance a robot's ability to perform mobile manipulation tasks, showcasing an application where a Boston Dynamics Spot is tasked with retrieving concealed target items, given only the 3D scene graph as input.

High-definition (HD) maps play a crucial role in autonomous driving systems. Recent methods have attempted to construct HD maps in real-time using vehicle onboard sensors. Due to the inherent limitations of onboard sensors, which include sensitivity to detection range and susceptibility to occlusion by nearby vehicles, the performance of these methods significantly declines in complex scenarios and long-range detection tasks. In this paper, we explore a new perspective that boosts HD map construction through the use of satellite maps to complement onboard sensors. We initially generate the satellite map tiles for each sample in nuScenes and release a complementary dataset for further research. To enable better integration of satellite maps with existing methods, we propose a hierarchical fusion module, which includes feature-level fusion and BEV-level fusion. The feature-level fusion, composed of a mask generator and a masked cross-attention mechanism, is used to refine the features from onboard sensors. The BEV-level fusion mitigates the coordinate differences between features obtained from onboard sensors and satellite maps through an alignment module. The experimental results on the augmented nuScenes showcase the seamless integration of our module into three existing HD map construction methods. The satellite maps and our proposed module notably enhance their performance in both HD map semantic segmentation and instance detection tasks.

Previous work has showcased the intriguing capability of large language models (LLMs) in retrieving facts and processing context knowledge. However, only limited research exists on the layer-wise capability of LLMs to encode knowledge, which challenges our understanding of their internal mechanisms. In this paper, we devote the first attempt to investigate the layer-wise capability of LLMs through probing tasks. We leverage the powerful generative capability of ChatGPT to construct probing datasets, providing diverse and coherent evidence corresponding to various facts. We employ mathcal V-usable information as the validation metric to better reflect the capability in encoding context knowledge across different layers. Our experiments on conflicting and newly acquired knowledge show that LLMs: (1) prefer to encode more context knowledge in the upper layers; (2) primarily encode context knowledge within knowledge-related entity tokens at lower layers while progressively expanding more knowledge within other tokens at upper layers; and (3) gradually forget the earlier context knowledge retained within the intermediate layers when provided with irrelevant evidence. Code is publicly available at https://github.com/Jometeorie/probing_llama.

SLAM plays a crucial role in automation tasks, such as warehouse logistics, healthcare robotics, and restaurant delivery. These scenes come with various challenges, including navigating around crowds of people, dealing with flying plastic bags that can temporarily blind sensors, and addressing reduced LiDAR density caused by cooking smoke. Such scenarios can result in over-degeneracy, causing the map to drift. To address this issue, this paper presents a multi-map LiDAR-inertial system (MM-LINS) for the first time. The front-end employs an iterated error state Kalman filter for state estimation and introduces a reliable evaluation strategy for degeneracy detection. If over-degeneracy is detected, the active map will be stored into sleeping maps. Subsequently, the system continuously attempts to construct new maps using a dynamic initialization method to ensure successful initialization upon leaving the over-degeneracy. Regarding the back-end, the Scan Context descriptor is utilized to detect inter-map similarity. Upon successful recognition of a sleeping map that shares a common region with the active map, the overlapping trajectory region is utilized to constrain the positional transformation near the edge of the prior map. In response to this, a constraint-enhanced map fusion strategy is proposed to achieve high-precision positional and mapping results. Experiments have been conducted separately on both public datasets that exhibited over-degenerate conditions and in real-world environments. These tests demonstrated the effectiveness of MM-LINS in over-degeneracy environment. Our codes are open-sourced on Github.

Spatial embodied intelligence requires agents to act to acquire information under partial observability. While multimodal foundation models excel at passive perception, their capacity for active, self-directed exploration remains understudied. We propose Theory of Space, defined as an agent's ability to actively acquire information through self-directed, active exploration and to construct, revise, and exploit a spatial belief from sequential, partial observations. We evaluate this through a benchmark where the goal is curiosity-driven exploration to build an accurate cognitive map. A key innovation is spatial belief probing, which prompts models to reveal their internal spatial representations at each step. Our evaluation of state-of-the-art models reveals several critical bottlenecks. First, we identify an Active-Passive Gap, where performance drops significantly when agents must autonomously gather information. Second, we find high inefficiency, as models explore unsystematically compared to program-based proxies. Through belief probing, we diagnose that while perception is an initial bottleneck, global beliefs suffer from instability that causes spatial knowledge to degrade over time. Finally, using a false belief paradigm, we uncover Belief Inertia, where agents fail to update obsolete priors with new evidence. This issue is present in text-based agents but is particularly severe in vision-based models. Our findings suggest that current foundation models struggle to maintain coherent, revisable spatial beliefs during active exploration.

Neural network models have a reputation for being black boxes. We propose to monitor the features at every layer of a model and measure how suitable they are for classification. We use linear classifiers, which we refer to as "probes", trained entirely independently of the model itself. This helps us better understand the roles and dynamics of the intermediate layers. We demonstrate how this can be used to develop a better intuition about models and to diagnose potential problems. We apply this technique to the popular models Inception v3 and Resnet-50. Among other things, we observe experimentally that the linear separability of features increase monotonically along the depth of the model.

False negatives (FN) in 3D object detection, {\em e.g.}, missing predictions of pedestrians, vehicles, or other obstacles, can lead to potentially dangerous situations in autonomous driving. While being fatal, this issue is understudied in many current 3D detection methods. In this work, we propose Hard Instance Probing (HIP), a general pipeline that identifies FN in a multi-stage manner and guides the models to focus on excavating difficult instances. For 3D object detection, we instantiate this method as FocalFormer3D, a simple yet effective detector that excels at excavating difficult objects and improving prediction recall. FocalFormer3D features a multi-stage query generation to discover hard objects and a box-level transformer decoder to efficiently distinguish objects from massive object candidates. Experimental results on the nuScenes and Waymo datasets validate the superior performance of FocalFormer3D. The advantage leads to strong performance on both detection and tracking, in both LiDAR and multi-modal settings. Notably, FocalFormer3D achieves a 70.5 mAP and 73.9 NDS on nuScenes detection benchmark, while the nuScenes tracking benchmark shows 72.1 AMOTA, both ranking 1st place on the nuScenes LiDAR leaderboard. Our code is available at https://github.com/NVlabs/FocalFormer3D.

When a language model asserts that "the capital of Australia is Sydney," does it know this is wrong? We characterize the geometry of correctness representations across 9 models from 5 architecture families. The structure is simple: the discriminative signal occupies 3-8 dimensions, performance degrades with additional dimensions, and no nonlinear classifier improves over linear separation. Centroid distance in the low-dimensional subspace matches trained probe performance (0.90 AUC), enabling few-shot detection: on GPT-2, 25 labeled examples achieve 89% of full-data accuracy. We validate causally through activation steering: the learned direction produces 10.9 percentage point changes in error rates while random directions show no effect. Internal probes achieve 0.80-0.97 AUC; output-based methods (P(True), semantic entropy) achieve only 0.44-0.64 AUC. The correctness signal exists internally but is not expressed in outputs. That centroid distance matches probe performance indicates class separation is a mean shift, making detection geometric rather than learned.

Generalizable active mapping in complex unknown environments remains a critical challenge for mobile robots. Existing methods, constrained by insufficient training data and conservative exploration strategies, exhibit limited generalizability across scenes with diverse layouts and complex connectivity. To enable scalable training and reliable evaluation, we introduce GLEAM-Bench, the first large-scale benchmark designed for generalizable active mapping with 1,152 diverse 3D scenes from synthetic and real-scan datasets. Building upon this foundation, we propose GLEAM, a unified generalizable exploration policy for active mapping. Its superior generalizability comes mainly from our semantic representations, long-term navigable goals, and randomized strategies. It significantly outperforms state-of-the-art methods, achieving 66.50% coverage (+9.49%) with efficient trajectories and improved mapping accuracy on 128 unseen complex scenes. Project page: https://xiao-chen.tech/gleam/.

High-definition (HD) maps, particularly those containing lane-level information regarded as ground truth, are crucial for vehicle localization research. Traditionally, constructing HD maps requires highly accurate sensor measurements collection from the target area, followed by manual annotation to assign semantic information. Consequently, HD maps are limited in terms of geographic coverage. To tackle this problem, in this paper, we propose SIO-Mapper, a novel lane-level HD map construction framework that constructs city-scale maps without physical site visits by utilizing satellite images and OpenStreetmap data. One of the key contributions of SIO-Mapper is its ability to extract lane information more accurately by introducing SIO-Net, a novel deep learning network that integrates features from satellite image and OpenStreetmap using both Transformer-based and convolution-based encoders. Furthermore, to overcome challenges in merging lanes over large areas, we introduce a novel lane integration methodology that combines cluster-based and graph-based approaches. This algorithm ensures the seamless aggregation of lane segments with high accuracy and coverage, even in complex road environments. We validated SIO-Mapper on the Naver Labs Open Dataset and NuScenes dataset, demonstrating better performance in various environments including Korea, the United States, and Singapore compared to the state-of-the-art lane-level HD mapconstruction methods.

Geomagnetic map interpolation aims to infer unobserved geomagnetic data at spatial points, yielding critical applications in navigation and resource exploration. However, existing methods for scattered data interpolation are not specifically designed for geomagnetic maps, which inevitably leads to suboptimal performance due to detection noise and the laws of physics. Therefore, we propose a Physics-informed Diffusion Generation framework~(PDG) to interpolate incomplete geomagnetic maps. First, we design a physics-informed mask strategy to guide the diffusion generation process based on a local receptive field, effectively eliminating noise interference. Second, we impose a physics-informed constraint on the diffusion generation results following the kriging principle of geomagnetic maps, ensuring strict adherence to the laws of physics. Extensive experiments and in-depth analyses on four real-world datasets demonstrate the superiority and effectiveness of each component of PDG.

The success of pre-trained contextualized representations has prompted researchers to analyze them for the presence of linguistic information. Indeed, it is natural to assume that these pre-trained representations do encode some level of linguistic knowledge as they have brought about large empirical improvements on a wide variety of NLP tasks, which suggests they are learning true linguistic generalization. In this work, we focus on intrinsic probing, an analysis technique where the goal is not only to identify whether a representation encodes a linguistic attribute but also to pinpoint where this attribute is encoded. We propose a novel latent-variable formulation for constructing intrinsic probes and derive a tractable variational approximation to the log-likelihood. Our results show that our model is versatile and yields tighter mutual information estimates than two intrinsic probes previously proposed in the literature. Finally, we find empirical evidence that pre-trained representations develop a cross-lingually entangled notion of morphosyntax.

Visual navigation ability is strongly tied to its underlying representation of the world. Unlike classical 3D maps that require globally-consistent geometry, image- or object-relative topological graphs almost entirely do away with geometric understanding. But, this comes at the cost of navigation capability, often limiting it to merely teach-and-repeat. In this work, we propose a novel map representation in the form of pixel-relative connectivity, which is geometrically accurate but does not require global geometric consistency. Inspired by recent progress in 3D grounded image matching, we construct a map from an image sequence through inter-image connectivity based on pixel correspondences in the relative 3D coordinate systems of individual image pairs. We then use this pixel-level graph to perform global path planning by approximating and sparsifying intra-image pixel connectivity. Through this, we derive a ''WayPixel Costmap'' representation and train a controller conditioned on it to predict a trajectory rollout. We show that this dense pixel-level costmap based on relative geometry is a more accurate conditioning variable for control prediction than its image- and object-level counterparts. This enables a highly capable navigation system, as validated on four types of navigation tasks in the simulator and through real world demonstrations.

Generalization, the ability to perform well beyond the training context, is a hallmark of biological and artificial intelligence, yet anticipating unseen failures remains a central challenge. Conventional approaches often take a ``bottom-up'' mechanistic route by reverse-engineering interpretable features or circuits to build explanatory models. While insightful, these methods often struggle to provide the high-level, predictive signals for anticipating failure in real-world deployment. Here, we propose using a ``top-down'' approach to studying generalization failures inspired by medical biomarkers: identifying system-level measurements that serve as robust indicators of a model's future performance. Rather than mapping out detailed internal mechanisms, we systematically design and test network markers to probe structure, function links, identify prognostic indicators, and validate predictions in real-world settings. In image classification, we find that task-relevant geometric properties of in-distribution (ID) object manifolds consistently forecast poor out-of-distribution (OOD) generalization. In particular, reductions in two geometric measures, effective manifold dimensionality and utility, predict weaker OOD performance across diverse architectures, optimizers, and datasets. We apply this finding to transfer learning with ImageNet-pretrained models. We consistently find that the same geometric patterns predict OOD transfer performance more reliably than ID accuracy. This work demonstrates that representational geometry can expose hidden vulnerabilities, offering more robust guidance for model selection and AI interpretability.

Understanding high-dimensional data requires projecting it into lower-dimensional spaces, but any single projection inevitably loses information or introduces distortions. Tours address this limitation through animation of 2D projection sequences, yet existing tools present tradeoffs in the freedom and steerability of projection traversal, providing little to no ability to move between expert-guided paths and unrestrained exploration. We present dtour, a tour interface that combines static projection previews, reversible scrubbing along continuous geodesic projection paths, manual projection manipulation, and a wandering grand tour, all within a single progressive exploration interface. dtour scales to millions of points via GPU-accelerated rendering, runs in any modern browser, and integrates with both Python and JavaScript ecosystems. We demonstrate dtour on text, image, and single-cell data for two usage scenarios: gradually revealing structure in high-dimensional data and validating non-linear dimensionality reduction outputs.

Existing routers rely on semantic query features or handcrafted features, which often fail to capture model-specific failures or intrinsic task difficulty. We instead route using internal LLM activations, specifically the residual stream. Our key idea, Encoder-Target Decoupling, separates the model that produces the predictive signal (the Encoder) from the model whose correctness is being estimated (the Target), allowing open-weight encoders to predict the performance of closed-source target models. We evaluate layerwise geometric probes, finding that Fisher Separability (J) effectively identifies informative layers, supported by Effective Dimensionality (d_{eff}) diagnostics. We then utilize a SharedTrunkNet, a joint multi-output MLP that predicts simultaneous correctness probabilities across candidate models using concatenated prefill features. In our experiments, SharedTrunkNet consistently outperforms semantic baselines. At its best, SharedTrunkNet closes 45.58% of the gap between the strongest standalone model and the oracle while achieving 74.31% cost savings relative to the most expensive model. These results demonstrate that prefill activations provide a robust routing signal, establishing activation-based routing as a high-performance alternative to purely semantic selection.

LiDAR mapping is important yet challenging in self-driving and mobile robotics. To tackle such a global point cloud registration problem, DeepMapping converts the complex map estimation into a self-supervised training of simple deep networks. Despite its broad convergence range on small datasets, DeepMapping still cannot produce satisfactory results on large-scale datasets with thousands of frames. This is due to the lack of loop closures and exact cross-frame point correspondences, and the slow convergence of its global localization network. We propose DeepMapping2 by adding two novel techniques to address these issues: (1) organization of training batch based on map topology from loop closing, and (2) self-supervised local-to-global point consistency loss leveraging pairwise registration. Our experiments and ablation studies on public datasets (KITTI, NCLT, and Nebula) demonstrate the effectiveness of our method.

The capability of autonomous exploration in complex, unknown environments is important in many robotic applications. While recent research on autonomous exploration have achieved much progress, there are still limitations, e.g., existing methods relying on greedy heuristics or optimal path planning are often hindered by repetitive paths and high computational demands. To address such limitations, we propose a novel exploration framework that utilizes the global topology information of observed environment to improve exploration efficiency while reducing computational overhead. Specifically, global information is utilized based on a skeletal topological graph representation of the environment geometry. We first propose an incremental skeleton extraction method based on wavefront propagation, based on which we then design an approach to generate a lightweight topological graph that can effectively capture the environment's structural characteristics. Building upon this, we introduce a finite state machine that leverages the topological structure to efficiently plan coverage paths, which can substantially mitigate the back-and-forth maneuvers (BFMs) problem. Experimental results demonstrate the superiority of our method in comparison with state-of-the-art methods. The source code will be made publicly available at: https://github.com/Haochen-Niu/STGPlanner.

Open-set semantic mapping is crucial for open-world robots. Current mapping approaches either are limited by the depth range or only map beyond-range entities in constrained settings, where overall they fail to combine within-range and beyond-range observations. Furthermore, these methods make a trade-off between fine-grained semantics and efficiency. We introduce RayFronts, a unified representation that enables both dense and beyond-range efficient semantic mapping. RayFronts encodes task-agnostic open-set semantics to both in-range voxels and beyond-range rays encoded at map boundaries, empowering the robot to reduce search volumes significantly and make informed decisions both within & beyond sensory range, while running at 8.84 Hz on an Orin AGX. Benchmarking the within-range semantics shows that RayFronts's fine-grained image encoding provides 1.34x zero-shot 3D semantic segmentation performance while improving throughput by 16.5x. Traditionally, online mapping performance is entangled with other system components, complicating evaluation. We propose a planner-agnostic evaluation framework that captures the utility for online beyond-range search and exploration, and show RayFronts reduces search volume 2.2x more efficiently than the closest online baselines.

Active Geo-localization (AGL) is the task of localizing a goal, represented in various modalities (e.g., aerial images, ground-level images, or text), within a predefined search area. Current methods approach AGL as a goal-reaching reinforcement learning (RL) problem with a distance-based reward. They localize the goal by implicitly learning to minimize the relative distance from it. However, when distance estimation becomes challenging or when encountering unseen targets and environments, the agent exhibits reduced robustness and generalization ability due to the less reliable exploration strategy learned during training. In this paper, we propose GeoExplorer, an AGL agent that incorporates curiosity-driven exploration through intrinsic rewards. Unlike distance-based rewards, our curiosity-driven reward is goal-agnostic, enabling robust, diverse, and contextually relevant exploration based on effective environment modeling. These capabilities have been proven through extensive experiments across four AGL benchmarks, demonstrating the effectiveness and generalization ability of GeoExplorer in diverse settings, particularly in localizing unfamiliar targets and environments.

Although LiDAR semantic segmentation advances rapidly, state-of-the-art methods often incorporate specifically designed inductive bias derived from benchmarks originating from mechanical spinning LiDAR. This can limit model generalizability to other kinds of LiDAR technologies and make hyperparameter tuning more complex. To tackle these issues, we propose a generalized framework to accommodate various types of LiDAR prevalent in the market by replacing window-attention with our sparse focal point modulation. Our SFPNet is capable of extracting multi-level contexts and dynamically aggregating them using a gate mechanism. By implementing a channel-wise information query, features that incorporate both local and global contexts are encoded. We also introduce a novel large-scale hybrid-solid LiDAR semantic segmentation dataset for robotic applications. SFPNet demonstrates competitive performance on conventional benchmarks derived from mechanical spinning LiDAR, while achieving state-of-the-art results on benchmark derived from solid-state LiDAR. Additionally, it outperforms existing methods on our novel dataset sourced from hybrid-solid LiDAR. Code and dataset are available at https://github.com/Cavendish518/SFPNet and https://www.semanticindustry.top.

Soil sinkholes significantly influence soil degradation, but their irregular shapes, along with interference from shadow and vegetation, make it challenging to accurately quantify their properties using remotely sensed data. We present a novel framework for sinkhole segmentation that combines traditional topographic computations of closed depressions with the newly developed prompt-based Segment Anything Model (SAM). Within this framework, termed SinkSAM, we highlight four key improvements: (1) The integration of topographic computations with SAM enables pixel-level refinement of sinkhole boundaries segmentation; (2) A coherent mathematical prompting strategy, based on closed depressions, addresses the limitations of purely learning-based models (CNNs) in detecting and segmenting undefined sinkhole features, while improving generalization to new, unseen regions; (3) Using Depth Anything V2 monocular depth for automatic prompts eliminates photogrammetric biases, enabling sinkhole mapping without the dependence on LiDAR data; and (4) An established sinkhole database facilitates fine-tuning of SAM, improving its zero-shot performance in sinkhole segmentation. These advancements allow the deployment of SinkSAM, in an unseen test area, in the highly variable semiarid region, achieving an intersection-over-union (IoU) of 40.27\% and surpassing previous results. This paper also presents the first SAM implementation for sinkhole segmentation and demonstrates the robustness of SinkSAM in extracting sinkhole maps using a single RGB image.

Vision-Language Models (VLMs) have demonstrated remarkable progress in multimodal tasks, but remain susceptible to hallucinations, where generated text deviates from the underlying visual content. Existing hallucination detection methods primarily rely on output logits or external verification tools, often overlooking their internal mechanisms. In this work, we investigate the outputs of internal attention heads, postulating that specific heads carry the primary signals for truthful generation.However, directly probing these high-dimensional states is challenging due to the entanglement of visual-linguistic syntax and noise. To address this, we propose VIB-Probe, a novel hallucination detection and mitigation framework leveraging the Variational Information Bottleneck (VIB) theory. Our method extracts discriminative patterns across layers and heads while filtering out semantic nuisances through the information bottleneck principle. Furthermore, by leveraging the gradients of our VIB probe, we identify attention heads with strong causal influence on hallucinations and introduce an inference-time intervention strategy for hallucination mitigation. Extensive experiments across diverse benchmarks demonstrate that VIB-Probe significantly outperforms existing baselines in both settings. Our code will be made publicly available.

We present a geometric framework for filtered approximate nearest neighbor (ANN) search. Filtering a proximity graph by a metadata predicate produces a subgraph, a fiber, whose connectivity and geometry can differ sharply from the full graph. Using local signals, we propose a two-phase search algorithm that combines full-graph exploration with filtered-neighbor descent when the local geometry is favorable. These signals also classify search failures into three regimes: topological cuts, geometric folds, and genuine basins. A key observation is that all three share a common resolution: restarting the search in a fiber-present cluster near the query. To support this, we introduce a lightweight anchor structure that identifies such regions and restarts the search accordingly. We show empirically that the method outperforms FAISS HNSW on filtered search and the three failure regimes separate cleanly and shift predictably with filter selectivity.

Agents navigating in 3D environments require some form of memory, which should hold a compact and actionable representation of the history of observations useful for decision taking and planning. In most end-to-end learning approaches the representation is latent and usually does not have a clearly defined interpretation, whereas classical robotics addresses this with scene reconstruction resulting in some form of map, usually estimated with geometry and sensor models and/or learning. In this work we propose to learn an actionable representation of the scene independently of the targeted downstream task and without explicitly optimizing reconstruction. The learned representation is optimized by a blind auxiliary agent trained to navigate with it on multiple short sub episodes branching out from a waypoint and, most importantly, without any direct visual observation. We argue and show that the blindness property is important and forces the (trained) latent representation to be the only means for planning. With probing experiments we show that the learned representation optimizes navigability and not reconstruction. On downstream tasks we show that it is robust to changes in distribution, in particular the sim2real gap, which we evaluate with a real physical robot in a real office building, significantly improving performance.

Discovering causal regularities and applying them to build functional systems--the discovery-to-application loop--is a hallmark of general intelligence, yet evaluating this capacity has been hindered by the vast complexity gap between scientific discovery and real-world engineering. We introduce SciCrafter, a Minecraft-based benchmark that operationalizes this loop through parameterized redstone circuit tasks. Agents must ignite lamps in specified patterns (e.g., simultaneously or in timed sequences); scaling target parameters substantially increases construction complexity and required knowledge, forcing genuine discovery rather than reliance on memorized solutions. Evaluating frontier models including GPT-5.2, Gemini-3-Pro, and Claude-Opus-4.5 under a general-purpose code agent scaffold, we find that all plateau at approximately 26% success rate. To diagnose these failures, we decompose the loop into four capacities--knowledge gap identification, experimental discovery, knowledge consolidation, and knowledge application--and design targeted interventions whose marginal contributions serve as proxies for corresponding gaps. Our analysis reveals that although the general knowledge application capability still remains as the biggest gap across all models, for frontier models the knowledge gap identification starts to become a major hurdle--indicating the bottleneck is shifting from solving problems right to raising the right problems for current AI. We release SciCrafter as a diagnostic probe for future research on AI systems that navigate the full discovery-to-application loop.

Autonomous driving systems require High-Definition (HD) semantic maps to navigate around urban roads. Existing solutions approach the semantic mapping problem by offline manual annotation, which suffers from serious scalability issues. Recent learning-based methods produce dense rasterized segmentation predictions to construct maps. However, these predictions do not include instance information of individual map elements and require heuristic post-processing to obtain vectorized maps. To tackle these challenges, we introduce an end-to-end vectorized HD map learning pipeline, termed VectorMapNet. VectorMapNet takes onboard sensor observations and predicts a sparse set of polylines in the bird's-eye view. This pipeline can explicitly model the spatial relation between map elements and generate vectorized maps that are friendly to downstream autonomous driving tasks. Extensive experiments show that VectorMapNet achieve strong map learning performance on both nuScenes and Argoverse2 dataset, surpassing previous state-of-the-art methods by 14.2 mAP and 14.6mAP. Qualitatively, VectorMapNet is capable of generating comprehensive maps and capturing fine-grained details of road geometry. To the best of our knowledge, VectorMapNet is the first work designed towards end-to-end vectorized map learning from onboard observations. Our project website is available at https://tsinghua-mars-lab.github.io/vectormapnet/.

The "thinking-with-images" paradigm enables multimodal large language models (MLLMs) to actively explore visual scenes via zoom-in tools. This is essential for ultra-high-resolution (UHR) remote sensing VQA, where task-relevant cues are sparse and tiny. However, we observe a consistent failure mode in existing zoom-enabled MLLMs: Tool Usage Homogenization, where tool calls collapse into task-agnostic patterns, limiting effective evidence acquisition. To address this, we propose GeoEyes, a staged training framework consisting of (1) a cold-start SFT dataset, UHR Chain-of-Zoom (UHR-CoZ), which covers diverse zooming regimes, and (2) an agentic reinforcement learning method, AdaZoom-GRPO, that explicitly rewards evidence gain and answer improvement during zoom interactions. The resulting model learns on-demand zooming with proper stopping behavior and achieves substantial improvements on UHR remote sensing benchmarks, with 54.23% accuracy on XLRS-Bench.

As LLM-based judges become integral to industry applications, obtaining well-calibrated uncertainty estimates efficiently has become critical for production deployment. However, existing techniques, such as verbalized confidence and multi-generation methods, are often either poorly calibrated or computationally expensive. We introduce linear probes trained with a Brier score-based loss to provide calibrated uncertainty estimates from reasoning judges' hidden states, requiring no additional model training. We evaluate our approach on both objective tasks (reasoning, mathematics, factuality, coding) and subjective human preference judgments. Our results demonstrate that probes achieve superior calibration compared to existing methods with approx10x computational savings, generalize robustly to unseen evaluation domains, and deliver higher accuracy on high-confidence predictions. However, probes produce conservative estimates that underperform on easier datasets but may benefit safety-critical deployments prioritizing low false-positive rates. Overall, our work demonstrates that interpretability-based uncertainty estimation provides a practical and scalable plug-and-play solution for LLM judges in production.

Lane-level navigation is critical for geographic information systems and navigation-based tasks, offering finer-grained guidance than road-level navigation by standard definition (SD) maps. However, it currently relies on expansive global HD maps that cannot adapt to dynamic road conditions. Recently, online perception (OP) maps have become research hotspots, providing real-time geometry as an alternative, but lack the global topology needed for navigation. To address these issues, Online Navigation Refinement (ONR), a new mission is introduced that refines SD-map-based road-level routes into accurate lane-level navigation by associating SD maps with OP maps. The map-to-map association to handle many-to-one lane-to-road mappings under two key challenges: (1) no public dataset provides lane-to-road correspondences; (2) severe misalignment from spatial fluctuations, semantic disparities, and OP map noise invalidates traditional map matching. For these challenges, We contribute: (1) Online map association dataset (OMA), the first ONR benchmark with 30K scenarios and 2.6M annotated lane vectors; (2) MAT, a transformer with path-aware attention to aligns topology despite spatial fluctuations and semantic disparities and spatial attention for integrates noisy OP features via global context; and (3) NR P-R, a metric evaluating geometric and semantic alignment. Experiments show that MAT outperforms existing methods at 34 ms latency, enabling low-cost and up-to-date lane-level navigation.

Simultaneous Localization and Mapping (SLAM) is being deployed in real-world applications, however many state-of-the-art solutions still struggle in many common scenarios. A key necessity in progressing SLAM research is the availability of high-quality datasets and fair and transparent benchmarking. To this end, we have created the Hilti-Oxford Dataset, to push state-of-the-art SLAM systems to their limits. The dataset has a variety of challenges ranging from sparse and regular construction sites to a 17th century neoclassical building with fine details and curved surfaces. To encourage multi-modal SLAM approaches, we designed a data collection platform featuring a lidar, five cameras, and an IMU (Inertial Measurement Unit). With the goal of benchmarking SLAM algorithms for tasks where accuracy and robustness are paramount, we implemented a novel ground truth collection method that enables our dataset to accurately measure SLAM pose errors with millimeter accuracy. To further ensure accuracy, the extrinsics of our platform were verified with a micrometer-accurate scanner, and temporal calibration was managed online using hardware time synchronization. The multi-modality and diversity of our dataset attracted a large field of academic and industrial researchers to enter the second edition of the Hilti SLAM challenge, which concluded in June 2022. The results of the challenge show that while the top three teams could achieve an accuracy of 2cm or better for some sequences, the performance dropped off in more difficult sequences.

Geologic map, as a fundamental diagram in geology science, provides critical insights into the structure and composition of Earth's subsurface and surface. These maps are indispensable in various fields, including disaster detection, resource exploration, and civil engineering. Despite their significance, current Multimodal Large Language Models (MLLMs) often fall short in geologic map understanding. This gap is primarily due to the challenging nature of cartographic generalization, which involves handling high-resolution map, managing multiple associated components, and requiring domain-specific knowledge. To quantify this gap, we construct GeoMap-Bench, the first-ever benchmark for evaluating MLLMs in geologic map understanding, which assesses the full-scale abilities in extracting, referring, grounding, reasoning, and analyzing. To bridge this gap, we introduce GeoMap-Agent, the inaugural agent designed for geologic map understanding, which features three modules: Hierarchical Information Extraction (HIE), Domain Knowledge Injection (DKI), and Prompt-enhanced Question Answering (PEQA). Inspired by the interdisciplinary collaboration among human scientists, an AI expert group acts as consultants, utilizing a diverse tool pool to comprehensively analyze questions. Through comprehensive experiments, GeoMap-Agent achieves an overall score of 0.811 on GeoMap-Bench, significantly outperforming 0.369 of GPT-4o. Our work, emPowering gEologic mAp holistiC undErstanding (PEACE) with MLLMs, paves the way for advanced AI applications in geology, enhancing the efficiency and accuracy of geological investigations.

Recent advances in large-scale pretraining have yielded visual foundation models with strong capabilities. Not only can recent models generalize to arbitrary images for their training task, their intermediate representations are useful for other visual tasks such as detection and segmentation. Given that such models can classify, delineate, and localize objects in 2D, we ask whether they also represent their 3D structure? In this work, we analyze the 3D awareness of visual foundation models. We posit that 3D awareness implies that representations (1) encode the 3D structure of the scene and (2) consistently represent the surface across views. We conduct a series of experiments using task-specific probes and zero-shot inference procedures on frozen features. Our experiments reveal several limitations of the current models. Our code and analysis can be found at https://github.com/mbanani/probe3d.

Recent advances in MLLMs are reframing segmentation from fixed-category prediction to instruction-grounded localization. While reasoning based segmentation has progressed rapidly in natural scenes, remote sensing lacks a generalizable solution due to the prohibitive cost of reasoning-oriented data and domain-specific challenges like overhead viewpoints. We present GeoSeg, a zero-shot, training-free framework that bypasses the supervision bottleneck for reasoning-driven remote sensing segmentation. GeoSeg couples MLLM reasoning with precise localization via: (i) bias-aware coordinate refinement to correct systematic grounding shifts and (ii) a dual-route prompting mechanism to fuse semantic intent with fine-grained spatial cues. We also introduce GeoSeg-Bench, a diagnostic benchmark of 810 image--query pairs with hierarchical difficulty levels. Experiments show that GeoSeg consistently outperforms all baselines, with extensive ablations confirming the effectiveness and necessity of each component.

Radio frequency (RF) signal mapping, which is the process of analyzing and predicting the RF signal strength and distribution across specific areas, is crucial for cellular network planning and deployment. Traditional approaches to RF signal mapping rely on statistical models constructed based on measurement data, which offer low complexity but often lack accuracy, or ray tracing tools, which provide enhanced precision for the target area but suffer from increased computational complexity. Recently, machine learning (ML) has emerged as a data-driven method for modeling RF signal propagation, which leverages models trained on synthetic datasets to perform RF signal mapping in "unseen" areas. In this paper, we present Geo2SigMap, an ML-based framework for efficient and high-fidelity RF signal mapping using geographic databases. First, we develop an automated framework that seamlessly integrates three open-source tools: OpenStreetMap (geographic databases), Blender (computer graphics), and Sionna (ray tracing), enabling the efficient generation of large-scale 3D building maps and ray tracing models. Second, we propose a cascaded U-Net model, which is pre-trained on synthetic datasets and employed to generate detailed RF signal maps, leveraging environmental information and sparse measurement data. Finally, we evaluate the performance of Geo2SigMap via a real-world measurement campaign, where three types of user equipment (UE) collect over 45,000 data points related to cellular information from six LTE cells operating in the citizens broadband radio service (CBRS) band. Our results show that Geo2SigMap achieves an average root-mean-square-error (RMSE) of 6.04 dB for predicting the reference signal received power (RSRP) at the UE, representing an average RMSE improvement of 3.59 dB compared to existing methods.

Accurate Above-Ground Biomass (AGB) mapping at both large scale and high spatio-temporal resolution is essential for applications ranging from climate modeling to biodiversity assessment, and sustainable supply chain monitoring. At present, fine-grained AGB mapping relies on costly airborne laser scanning acquisition campaigns usually limited to regional scales. Initiatives such as the ESA CCI map attempt to generate global biomass products from diverse spaceborne sensors but at a coarser resolution. To enable global, high-resolution (HR) mapping, several works propose to regress AGB from HR satellite observations such as ESA Sentinel-1/2 images. We propose a novel way to address HR AGB estimation, by leveraging both HR satellite observations and existing low-resolution (LR) biomass products. We cast this problem as Guided Super-Resolution (GSR), aiming at upsampling LR biomass maps (sources) from 100 to 10 m resolution, using auxiliary HR co-registered satellite images (guides). We compare super-resolving AGB maps with and without guidance, against direct regression from satellite images, on the public BioMassters dataset. We observe that Multi-Scale Guidance (MSG) outperforms direct regression both for regression (-780 t/ha RMSE) and perception (+2.0 dB PSNR) metrics, and better captures high-biomass values, without significant computational overhead. Interestingly, unlike the RGB+Depth setting they were originally designed for, our best-performing AGB GSR approaches are those that most preserve the guide image texture. Our results make a strong case for adopting the GSR framework for accurate HR biomass mapping at scale. Our code and model weights are made publicly available (https://github.com/kaankaramanofficial/GSR4B).

Running LLMs with extended reasoning on every problem is expensive, but determining which inputs actually require additional compute remains challenging. We investigate whether their own likelihood of success is recoverable from their internal representations before generation, and if this signal can guide more efficient inference. We train linear probes on pre-generation activations to predict policy-specific success on math and coding tasks, substantially outperforming surface features such as question length and TF-IDF. Using E2H-AMC, which provides both human and model performance on identical problems, we show that models encode a model-specific notion of difficulty that is distinct from human difficulty, and that this distinction increases with extended reasoning. Leveraging these probes, we demonstrate that routing queries across a pool of models can exceed the best-performing model whilst reducing inference cost by up to 70\% on MATH, showing that internal representations enable practical efficiency gains even when they diverge from human intuitions about difficulty. Our code is available at: https://github.com/KabakaWilliam/llms_know_difficulty

This paper presents a vector HD-mapping algorithm that formulates the mapping as a tracking task and uses a history of memory latents to ensure consistent reconstructions over time. Our method, MapTracker, accumulates a sensor stream into memory buffers of two latent representations: 1) Raster latents in the bird's-eye-view (BEV) space and 2) Vector latents over the road elements (i.e., pedestrian-crossings, lane-dividers, and road-boundaries). The approach borrows the query propagation paradigm from the tracking literature that explicitly associates tracked road elements from the previous frame to the current, while fusing a subset of memory latents selected with distance strides to further enhance temporal consistency. A vector latent is decoded to reconstruct the geometry of a road element. The paper further makes benchmark contributions by 1) Improving processing code for existing datasets to produce consistent ground truth with temporal alignments and 2) Augmenting existing mAP metrics with consistency checks. MapTracker significantly outperforms existing methods on both nuScenes and Agroverse2 datasets by over 8% and 19% on the conventional and the new consistency-aware metrics, respectively. The code will be available on our project page: https://map-tracker.github.io.

Joint vision-language models have shown great performance over a diverse set of tasks. However, little is known about their limitations, as the high dimensional space learned by these models makes it difficult to identify semantic errors. Recent work has addressed this problem by designing highly controlled probing task benchmarks. Our paper introduces a more scalable solution that relies on already annotated benchmarks. Our method consists of extracting a large set of diverse features from a vision-language benchmark and measuring their correlation with the output of the target model. We confirm previous findings that CLIP behaves like a bag of words model and performs better with nouns and verbs; we also uncover novel insights such as CLIP getting confused by concrete words. Our framework is available at https://github.com/MichiganNLP/Scalable-VLM-Probing and can be used with other multimodal models and benchmarks.

Navigation and mapping on the lunar surface require robust perception under challenging conditions, including poorly textured environments, high-contrast lighting, and limited computational resources. This paper presents a real-time mapping framework that integrates dense perception models with a 3D Gaussian Splatting (3DGS) representation. We first benchmark several models on synthetic datasets generated with the LuPNT simulator, selecting a stereo dense depth estimation model based on Gated Recurrent Units for its balance of speed and accuracy in depth estimation, and a convolutional neural network for its superior performance in detecting semantic segments. Using ground truth poses to decouple the local scene understanding from the global state estimation, our pipeline reconstructs a 120-meter traverse with a geometric height accuracy of approximately 3 cm, outperforming a traditional point cloud baseline without LiDAR. The resulting 3DGS map enables novel view synthesis and serves as a foundation for a full SLAM system, where its capacity for joint map and pose optimization would offer significant advantages. Our results demonstrate that combining semantic segmentation and dense depth estimation with learned map representations is an effective approach for creating detailed, large-scale maps to support future lunar surface missions.

Search and rescue with a team of heterogeneous mobile robots in unknown and large-scale underground environments requires high-precision localization and mapping. This crucial requirement is faced with many challenges in complex and perceptually-degraded subterranean environments, as the onboard perception system is required to operate in off-nominal conditions (poor visibility due to darkness and dust, rugged and muddy terrain, and the presence of self-similar and ambiguous scenes). In a disaster response scenario and in the absence of prior information about the environment, robots must rely on noisy sensor data and perform Simultaneous Localization and Mapping (SLAM) to build a 3D map of the environment and localize themselves and potential survivors. To that end, this paper reports on a multi-robot SLAM system developed by team CoSTAR in the context of the DARPA Subterranean Challenge. We extend our previous work, LAMP, by incorporating a single-robot front-end interface that is adaptable to different odometry sources and lidar configurations, a scalable multi-robot front-end to support inter- and intra-robot loop closure detection for large scale environments and multi-robot teams, and a robust back-end equipped with an outlier-resilient pose graph optimization based on Graduated Non-Convexity. We provide a detailed ablation study on the multi-robot front-end and back-end, and assess the overall system performance in challenging real-world datasets collected across mines, power plants, and caves in the United States. We also release our multi-robot back-end datasets (and the corresponding ground truth), which can serve as challenging benchmarks for large-scale underground SLAM.

Large Multimodal Models (LMMs) have shown remarkable progress in the field of medical Visual Question Answering (Med-VQA), achieving high accuracy on existing benchmarks. However, their reliability under robust evaluation is questionable. This study reveals that state-of-the-art models, when subjected to simple probing evaluation, perform worse than random guessing on medical diagnosis questions. To address this critical evaluation problem, we introduce the Probing Evaluation for Medical Diagnosis (ProbMed) dataset to rigorously assess LMM performance in medical imaging through probing evaluation and procedural diagnosis. Particularly, probing evaluation features pairing original questions with negation questions with hallucinated attributes, while procedural diagnosis requires reasoning across various diagnostic dimensions for each image, including modality recognition, organ identification, clinical findings, abnormalities, and positional grounding. Our evaluation reveals that top-performing models like GPT-4V and Gemini Pro perform worse than random guessing on specialized diagnostic questions, indicating significant limitations in handling fine-grained medical inquiries. Besides, models like LLaVA-Med struggle even with more general questions, and results from CheXagent demonstrate the transferability of expertise across different modalities of the same organ, showing that specialized domain knowledge is still crucial for improving performance. This study underscores the urgent need for more robust evaluation to ensure the reliability of LMMs in critical fields like medical diagnosis, and current LMMs are still far from applicable to those fields.

Through a controlled study, we identify a systematic deficiency in the multimodal grounding of Vision Language Models (VLMs). While VLMs can recall factual associations when provided a textual reference to an entity; their ability to do so is significantly diminished when the reference is visual instead. Forcing VLMs to rely on image representations of an entity halves their ability to recall factual knowledge, suggesting that VLMs struggle to link their internal knowledge of an entity with its image representation. We show that such linking failures are correlated with the expression of distinct patterns in model internal states, and that probes on these internal states achieve over 92% accuracy at flagging cases where the VLM response is unreliable. These probes can be applied, without retraining, to identify when a VLM will fail to correctly answer a question that requires an understanding of multimodal input. When used to facilitate selective prediction on a visual question answering task, the probes increase coverage by 7.87% (absolute) while also reducing the risk of error by 0.9% (absolute). Addressing the systematic, detectable deficiency is an important avenue in language grounding, and we provide informed recommendations for future directions.

Training-free block-sparse attention can accelerate video transformers, but row-wise attention concentration does not by itself specify an executable sparse operator. Queries sharing a block route may have poorly overlapping supports, while retained attention mass alone does not determine the post-softmax error from skipped interactions. We show that partition geometry affects both pooled support and the predictability of the remaining residual from the sparse output. We introduce SparsePR, which combines Response-Coupled Partitioning with Probe-Fitted Residual Reconstruction. Sampled-query key responses form paired K/V groups, whose centroids induce query-response coordinates for shared routing. A small set of exact query rows then calibrates a call-specific affine correction from the sparse output within the output subspace observed in the probe residuals. Across four heterogeneous video generation and world models, SparsePR consistently reduces attention-reconstruction error. Ablations show that probe fitting accounts for most of this reduction, while response-coupled partitioning lowers hard-drop error and improves reconstruction under a finite probe budget. SparsePR preserves generation quality at 22.0-26.0% realized executed-pair density while achieving 1.48x-2.61x end-to-end speedups. Project page: https://pardistaghavi.github.io/SparsePR-website/

Transformer-based models generate hidden states that are difficult to interpret. In this work, we analyze hidden states and modify them at inference, with a focus on motion forecasting. We use linear probing to analyze whether interpretable features are embedded in hidden states. Our experiments reveal high probing accuracy, indicating latent space regularities with functionally important directions. Building on this, we use the directions between hidden states with opposing features to fit control vectors. At inference, we add our control vectors to hidden states and evaluate their impact on predictions. Remarkably, such modifications preserve the feasibility of predictions. We further refine our control vectors using sparse autoencoders (SAEs). This leads to more linear changes in predictions when scaling control vectors. Our approach enables mechanistic interpretation as well as zero-shot generalization to unseen dataset characteristics with negligible computational overhead.

Simultaneous Localization and Mapping (SLAM)consists in the concurrent construction of a model of the environment (the map), and the estimation of the state of the robot moving within it. The SLAM community has made astonishing progress over the last 30 years, enabling large-scale real-world applications, and witnessing a steady transition of this technology to industry. We survey the current state of SLAM. We start by presenting what is now the de-facto standard formulation for SLAM. We then review related work, covering a broad set of topics including robustness and scalability in long-term mapping, metric and semantic representations for mapping, theoretical performance guarantees, active SLAM and exploration, and other new frontiers. This paper simultaneously serves as a position paper and tutorial to those who are users of SLAM. By looking at the published research with a critical eye, we delineate open challenges and new research issues, that still deserve careful scientific investigation. The paper also contains the authors' take on two questions that often animate discussions during robotics conferences: Do robots need SLAM? and Is SLAM solved?

We present vMAP, an object-level dense SLAM system using neural field representations. Each object is represented by a small MLP, enabling efficient, watertight object modelling without the need for 3D priors. As an RGB-D camera browses a scene with no prior information, vMAP detects object instances on-the-fly, and dynamically adds them to its map. Specifically, thanks to the power of vectorised training, vMAP can optimise as many as 50 individual objects in a single scene, with an extremely efficient training speed of 5Hz map update. We experimentally demonstrate significantly improved scene-level and object-level reconstruction quality compared to prior neural field SLAM systems. Project page: https://kxhit.github.io/vMAP.

Despite the emergence of diffusion large language models (D-LLMs) as an alternative to autoregressive large language models (AR-LLMs), safety monitoring for D-LLMs remains largely unexplored. Unlike AR-LLMs, D-LLMs generate text through a multi-step denoising process, exposing intermediate hidden representations that may contain safety-relevant information unavailable in standard single-step monitoring setups. Motivated by the suitability of lightweight probes for always-on monitoring, we analyze which trajectory-level signals best indicate when such probes are likely to struggle. We find that the most informative signal is safety hesitation: intermediate hidden states repeatedly falling within a small margin of the probe's decision boundary. The number of such hesitation steps in D-LLM's trajectory predicts probe failure effectively, providing a proxy of sample difficulty. Building on this analysis, we propose D^2-Monitor, a bi-level safety monitor for D-LLMs. D^2-Monitor adopts a lightweight probe as an always-on monitor to jointly estimate hesitation and perform base classification. When the hesitation level exceeds a threshold, a more expressive but computationally heavier probe is activated. This dynamic routing mechanism allocates monitoring resources efficiently at test time. Evaluated on 3 datasets (WildguardMix, ToxicChat, OpenAI-Moderation) across 4 D-LLMs, D^2-Monitor achieves state-of-the-art performance with a compact parameter footprint (leq 0.85M parameters), and exhibits the best trade-off between effectiveness and efficiency relative to 8 baselines.

Large language models (LLMs) have been reported to linearly encode truthfulness, yet recent work questions this finding's generality. We reconcile these views with the truthfulness spectrum hypothesis: the representational space contains directions ranging from broadly domain-general to narrowly domain-specific. To test this hypothesis, we systematically evaluate probe generalization across five truth types (definitional, empirical, logical, fictional, and ethical), sycophantic and expectation-inverted lying, and existing honesty benchmarks. Linear probes generalize well across most domains but fail on sycophantic and expectation-inverted lying. Yet training on all domains jointly recovers strong performance, confirming that domain-general directions exist despite poor pairwise transfer. The geometry of probe directions explains these patterns: Mahalanobis cosine similarity between probes near-perfectly predicts cross-domain generalization (R^2=0.98). Concept-erasure methods further isolate truth directions that are (1) domain-general, (2) domain-specific, or (3) shared only across particular domain subsets. Causal interventions reveal that domain-specific directions steer more effectively than domain-general ones. Finally, post-training reshapes truth geometry, pushing sycophantic lying further from other truth types, suggesting a representational basis for chat models' sycophantic tendencies. Together, our results support the truthfulness spectrum hypothesis: truth directions of varying generality coexist in representational space, with post-training reshaping their geometry. Code for all experiments is provided in https://github.com/zfying/truth_spec.

Multi-turn-to-single-turn (M2S) compresses iterative red-teaming into one structured prompt, but prior work relied on a handful of manually written templates. We present X-Teaming Evolutionary M2S, an automated framework that discovers and optimizes M2S templates through language-model-guided evolution. The system pairs smart sampling from 12 sources with an LLM-as-judge inspired by StrongREJECT and records fully auditable logs. Maintaining selection pressure by setting the success threshold to theta = 0.70, we obtain five evolutionary generations, two new template families, and 44.8% overall success (103/230) on GPT-4.1. A balanced cross-model panel of 2,500 trials (judge fixed) shows that structural gains transfer but vary by target; two models score zero at the same threshold. We also find a positive coupling between prompt length and score, motivating length-aware judging. Our results demonstrate that structure-level search is a reproducible route to stronger single-turn probes and underscore the importance of threshold calibration and cross-model evaluation. Code, configurations, and artifacts are available at https://github.com/hyunjun1121/M2S-x-teaming.

Zero-Shot Object Navigation in unknown environments poses significant challenges for Unmanned Aerial Vehicles (UAVs) due to the conflict between high-level semantic reasoning requirements and limited onboard computational resources. To address this, we present USS-Nav, a lightweight framework that incrementally constructs a Unified Spatio-Semantic scene graph and enables efficient Large Language Model (LLM)-augmented Zero-Shot Object Navigation in unknown environments. Specifically, we introduce an incremental Spatial Connectivity Graph generation method utilizing polyhedral expansion to capture global geometric topology, which is dynamically partitioned into semantic regions via graph clustering. Concurrently, open-vocabulary object semantics are instantiated and anchored to this topology to form a hierarchical environmental representation. Leveraging this hierarchical structure, we present a coarse-to-fine exploration strategy: LLM grounded in the scene graph's semantics to determine global target regions, while a local planner optimizes frontier coverage based on information gain. Experimental results demonstrate that our framework outperforms state-of-the-art methods in terms of computational efficiency and real-time update frequency (15 Hz) on a resource-constrained platform. Furthermore, ablation studies confirm the effectiveness of our framework, showing substantial improvements in Success weighted by Path Length (SPL). The source code will be made publicly available to foster further research.

Exploration is a prerequisite for learning useful behaviors in sparse-reward, long-horizon tasks, particularly within 3D environments. Curiosity-driven reinforcement learning addresses this via intrinsic rewards derived from the mismatch between the agent's predictive model of the world and reality. However, translating this intrinsic motivation to complex, photorealistic environments remains difficult, as agents can become trapped in local loops and receive fresh rewards for revisiting forgotten states. In this work, we demonstrate that this failure stems from a lack of spatial persistence and episodic context. We show that effective curiosity requires a model of the world that is persistent and continuously updated, paired with an agent that maintains an episodic trajectory history to navigate toward novel regions. We achieve this using an online 3D reconstruction as a persistent model of the world, while the agent policy is parameterized as a sequence model over RGB observations to maintain episodic context. This design enables effective exploration during training while allowing the agent to navigate using solely RGB frames at deployment. Trained purely via curiosity on HM3D, our agent outperforms RL-based active mapping baselines and generalizes zero-shot to Gibson and AI-generated worlds. Our end-to-end policy enables efficient adaptation to downstream tasks, such as apple picking and image-goal navigation, outperforming from-scratch baselines. Please see video results at https://recuriosity.github.io/.

Sparse roadmaps are important to compactly represent state spaces, to determine problems to be infeasible and to terminate in finite time. However, sparse roadmaps do not scale well to high-dimensional planning problems. In prior work, we showed improved planning performance on high-dimensional planning problems by using multilevel abstractions to simplify state spaces. In this work, we generalize sparse roadmaps to multilevel abstractions by developing a novel algorithm, the sparse multilevel roadmap planner (SMLR). To this end, we represent multilevel abstractions using the language of fiber bundles, and generalize sparse roadmap planners by using the concept of restriction sampling with visibility regions. We argue SMLR to be probabilistically complete and asymptotically near-optimal by inheritance from sparse roadmap planners. In evaluations, we outperform sparse roadmap planners on challenging planning problems, in particular problems which are high-dimensional, contain narrow passages or are infeasible. We thereby demonstrate sparse multilevel roadmaps as an efficient tool for feasible and infeasible high-dimensional planning problems.

High-definition (HD) maps are evolving from pre-annotated to real-time construction to better support autonomous driving in diverse scenarios. However, this process is hindered by low-quality input data caused by onboard sensors limited capability and frequent occlusions, leading to incomplete, noisy, or missing data, and thus reduced mapping accuracy and robustness. Recent efforts have introduced satellite images as auxiliary input, offering a stable, wide-area view to complement the limited ego perspective. However, satellite images in Bird's Eye View are often degraded by shadows and occlusions from vegetation and buildings. Prior methods using basic feature extraction and fusion remain ineffective. To address these challenges, we propose SATMapTR, a novel online map construction model that effectively fuses satellite image through two key components: (1) a gated feature refinement module that adaptively filters satellite image features by integrating high-level semantics with low-level structural cues to extract high signal-to-noise ratio map-relevant representations; and (2) a geometry-aware fusion module that consistently fuse satellite and BEV features at a grid-to-grid level, minimizing interference from irrelevant regions and low-quality inputs. Experimental results on the nuScenes dataset show that SATMapTR achieves the highest mean average precision (mAP) of 73.8, outperforming state-of-the-art satellite-enhanced models by up to 14.2 mAP. It also shows lower mAP degradation under adverse weather and sensor failures, and achieves nearly 3 times higher mAP at extended perception ranges.

Scientific reading is an active process that frequently requires consulting external resources, but manual keyword searching interrupts the reading flow and imposes a high cognitive load. Existing proactive information retrieval systems often suffer from context ambiguity, as they rely solely on on-screen text and ignore the reader's specific background and intent. In this demonstration, we present H-MAPS (Hierarchical Memory-Augmented Proactive Search Assistant), a proactive literature exploration assistant that resolves this ambiguity by leveraging a three-layered hierarchical memory. Triggered by implicit reading behaviors, H-MAPS articulates the user's latent information needs into explicit natural language questions and performs neural retrieval entirely on the local device to ensure privacy. We demonstrate H-MAPS using a scenario where two researchers, specializing in NLP and HCI, read the same paper. In response, the system generates profile-specific questions and retrieves distinct literature tailored to each user.

Planning records define restrictions over geographic areas, but their source documents often provide only indirect spatial evidence rather than machine-readable boundaries. We introduce Plan2Map, a 208-case multimodal benchmark for document-grounded geospatial boundary reconstruction from UK planning records. Given only a source planning document, systems must reconstruct a valid geospatial boundary from notice text, schedules, map plates, map labels, and boundary annotations; the reference GeoJSON is held out for scoring. We propose GeoPlanAgent, a document-grounded, geospatial-tool-in-the-loop system that decomposes the task into evidence extraction, localisation, map registration, boundary segmentation, projection, and verification. On Plan2Map, GeoPlanAgent achieves 0.736 mean IoU and 0.904 median IoU, with 67.8\% of predictions at or above 0.8 IoU, substantially outperforming direct VLM-to-GeoJSON baselines. Diagnostic analysis shows that direct VLM prediction remains unreliable, while remaining errors are concentrated in localisation and map registration, and supervised boundary segmentation substantially improves pixel-level mask quality. Plan2Map provides a concrete testbed for multimodal geospatial reconstruction from public planning records. Project page: https://odeb1.github.io/Plan2Map_Project_Page/.

Reliable odometry is essential for mobile robots as they increasingly enter more challenging environments, which often contain little information to constrain point cloud registration, resulting in degraded LiDAR-Inertial Odometry (LIO) accuracy or even divergence. To address this, we present BIEVR-LIO, a novel approach designed specifically to exploit subtle variations in the available geometry for improved robustness. We propose a high-resolution map representation that stores surfaces as compact voxel-wise oriented height images. This representation can directly be used for registration without the calculation of intermediate geometric primitives while still supporting efficient updates. Since informative geometry is often sparsely distributed in the environment, we further propose a map-informed point sampling strategy to focus registration on geometrically informative regions, improving robustness in uninformative environments while reducing computational cost compared to global high-resolution sampling. Experiments across multiple sensors, platforms, and environments demonstrates state-of-the-art performance in well-constrained scenes and substantial improvements in challenging scenarios where baseline methods diverge. Additionally, we demonstrate that the fine-grained geometry captured by BIEVR-LIO can be used for downstream tasks such as elevation mapping for robot locomotion.

Achieving effective test-time scaling requires models to engage in In-Context Exploration -- the intrinsic ability to generate, verify, and refine multiple reasoning hypotheses within a single continuous context. Grounded in State Coverage theory, our analysis identifies a critical bottleneck to enabling this capability: while broader state coverage requires longer reasoning trajectories, the probability of sampling such sequences decays exponentially during autoregressive generation, a phenomenon we term the ``Shallow Exploration Trap''. To bridge this gap, we propose Length-Incentivized Exploration(\method). This simple yet effective recipe explicitly encourages models to explore more via a length-based reward coupled with a redundancy penalty, thereby maximizing state coverage in two-step manner. Comprehensive experiments across different models (Qwen3, Llama) demonstrate that \method effectively incentivize in-context exploration. As a result, our method achieves an average improvement of 4.4\% on in-domain tasks and a 2.7\% gain on out-of-domain benchmarks.

This work explores whether language models encode meaningfully grounded representations of sounds of objects. We learn a linear probe that retrieves the correct text representation of an object given a snippet of audio related to that object, where the sound representation is given by a pretrained audio model. This probe is trained via a contrastive loss that pushes the language representations and sound representations of an object to be close to one another. After training, the probe is tested on its ability to generalize to objects that were not seen during training. Across different language models and audio models, we find that the probe generalization is above chance in many cases, indicating that despite being trained only on raw text, language models encode grounded knowledge of sounds for some objects.

Robust probabilistic mapping is essential for autonomous robotic systems operating in challenging environments. While traditional sensors fail in adverse conditions such as smoke and fog, millimeter wave (mmWave) radar sensors offer reliable sensing in such conditions. However, creating accurate probabilistic maps from radar data presents significant challenges due to the inherently sparse and noisy characteristics of radio wave measurements and signal processing steps. In an attempt to address these issues, we establish a complete pipeline from raw radar signals to probabilistic occupancy maps, incorporating Synthetic Aperture Radar processing followed by a probabilistic modeling step. We conduct extensive validation across indoor environments, comparing our approach against different signal processing and probabilistic modeling approaches. We also evaluate mapping quality through downstream path planning performance analysis. Furthermore, we investigate the impact of key parameters and antenna array configuration on mapping performance. The experimental results demonstrate both the effectiveness and limitations of SAR-based probabilistic mapping for real-world robotic deployment. To facilitate future research and broader adoption, we contribute an open-source cascaded mmWave radar dataset with an accompanying GPU-accelerated signal processing pipeline available at https://github.com/rpl-cmu/rpm.

We introduce a Wireless Signal based Efficient multi-Robot eXploration (WiSER-X) algorithm applicable to a decentralized team of robots exploring an unknown environment with communication bandwidth constraints. WiSER-X relies only on local inter-robot relative position estimates, that can be obtained by exchanging signal pings from onboard sensors such as WiFi, Ultra-Wide Band, amongst others, to inform the exploration decisions of individual robots to minimize redundant coverage overlaps. Furthermore, WiSER-X also enables asynchronous termination without requiring a shared map between the robots. It also adapts to heterogeneous robot behaviors and even complete failures in unknown environment while ensuring complete coverage. Simulations show that WiSER-X leads to 58% lower overlap than a zero-information-sharing baseline algorithm-1 and only 23% more overlap than a full-information-sharing algorithm baseline algorithm-2. Hardware experiments further validate the feasibility of WiSER-X using full onboard sensing.