Daily Papers

The inhomogeneous magnetic stray field of micromagnets has been extensively used to manipulate electron spin qubits. By means of micromagnetic simulations and scanning superconducting quantum interference device microscopy, we show that the polycrystallinity of the magnet and non-uniform magnetization significantly impact the stray field and corresponding qubit properties. We find that the random orientation of the crystal axis in polycrystalline Co magnets alters the qubit frequencies by up to 0.5 GHz, compromising single qubit addressability and single gate fidelities. We map the stray field of Fe micromagnets with an applied magnetic field of up to 500 mT (mimicking conditions when operating qubits), finding field gradients above 1 mT/nm. The measured gradients and the lower magnetocrystalline anisotropy of Fe demonstrate the advantage of using Fe instead of Co for magnets in spin qubit devices. These properties of Fe also enabled us to design a 2D arrangement of nanomagnets for driving spin qubits distributed on a 2D lattice.

In 2021 Nature Physics published a paper by Vaitiekenas, Liu, Krogstrup and Marcus titled "Zero-bias peaks at zero magnetic field in ferromagnetic hybrid nanowires". The paper reports low temperature transport measurements on semiconductor InAs nanowires with two partly overlapping shells -- a shell of EuS, a magnetic insulator, and a shell of Al, a metal that becomes superconducting at temperatures below 1.2K. The paper claims that (1) the data are consistent with induced topological superconductivity and Majorana zero modes (MZMs), and (2) that this is facilitated by the breaking of the time reversal symmetry through a direct magnetic interaction with the EuS shell. In this Matters Arising, we present an alternative explanation which is based on trivial effects that are likely to appear in the reported geometry. Specifically, first, we find that data the authors present in support of the topological superconductivity claim can originate from unintended quantum dots in their devices, a widely known likely explanation that is not being discussed in the paper. Second, our analysis of the setup, supported by our numerical micromagnetic simulations, shows similar effects could be obtained due to stray magnetic fields from the region of the EuS shell damaged during Al etching. This basic picture should come before the exotic interpretation in terms of magnetic exchange interaction with a ferromagnetic insulator.

Magnetite is an important mineral with many interesting applications related to its magnetic, electrical and thermal properties. Typically studied by electronic structure calculations, these methods are unable to capture the complex ion dynamics at relevant temperatures, time and length scales. We present a hybrid Monte Carlo/Molecular Dynamics (MC/MD) method based on iron oxidation state exchange for accurate atomistic modelling of bulk magnetite, magnetite surfaces and nanoparticles that captures the complex ionic dynamics. By comparing oxidation state patterns with those obtained from density functional theory, we confirmed the accuracy of our approach. Lattice distortions leading to the stabilisation of excess charges and a critical surface thickness at which the oxidation states transition from ordered to disordered were observed. This simple yet efficient approach paves the way for elucidating aspects of oxidation state ordering of inverse spinel structures in general and battery materials in particular.

The simulation of large-scale systems with complex electron interactions remains one of the greatest challenges for the atomistic modeling of materials. Although classical force fields often fail to describe the coupling between electronic states and ionic rearrangements, the more accurate ab-initio molecular dynamics suffers from computational complexity that prevents long-time and large-scale simulations, which are essential to study many technologically relevant phenomena, such as reactions, ion migrations, phase transformations, and degradation. In this work, we present the Crystal Hamiltonian Graph neural Network (CHGNet) as a novel machine-learning interatomic potential (MLIP), using a graph-neural-network-based force field to model a universal potential energy surface. CHGNet is pretrained on the energies, forces, stresses, and magnetic moments from the Materials Project Trajectory Dataset, which consists of over 10 years of density functional theory static and relaxation trajectories of sim 1.5 million inorganic structures. The explicit inclusion of magnetic moments enables CHGNet to learn and accurately represent the orbital occupancy of electrons, enhancing its capability to describe both atomic and electronic degrees of freedom. We demonstrate several applications of CHGNet in solid-state materials, including charge-informed molecular dynamics in Li_xMnO_2, the finite temperature phase diagram for Li_xFePO_4 and Li diffusion in garnet conductors. We critically analyze the significance of including charge information for capturing appropriate chemistry, and we provide new insights into ionic systems with additional electronic degrees of freedom that can not be observed by previous MLIPs.

We present the 2D gyrofluid magnetic reconnection code GREENY (Gyrofluid Reconnection with Extended Electromagnetic Nonlinearity). After a brief introduction to gyrofluids, magnetic reconnection, and the implemented models, we discuss the numerical framework and the algorithmic treatment of the quasi-neutrality condition and Amperè's law. Next, we present solver tests, conservation laws, and the influence of artificial subgrid dissipation on Harris-sheet magnetic reconnection. Finally, we show different applications, initial conditions and present example simulations.

We propose a universal expression for the domain-wall width in generic multi-sublattice Heisenberg magnets, applicable to ferro-, antiferro-, and ferrimagnetic orders. The result follows from an exact connection between the domain-wall profile and the long-wavelength spin-wave dispersion, yielding a unified framework for describing magnetic textures across distinct ordering types. The predictions show excellent quantitative agreement with large-scale atomistic spin dynamics simulations over a broad range of exchange and anisotropy values and spin multi-sublattice structures, including three-dimensional rock-salt-type magnets and two-dimensional honeycomb and kagome ferromagnets. Moreover, we establish a general microscopic foundation for the temperature dependence of the domain-wall width. Our approach offers a powerful tool for understanding domain-wall profiles in complex spin systems.

Multiscale problems are ubiquitous in physics. Numerical simulations of such problems by solving partial differential equations (PDEs) at high resolution are computationally too expensive for many-query scenarios, e.g., uncertainty quantification, remeshing applications, topology optimization, and so forth. This limitation has motivated the application of data-driven surrogate models, where the microscale computations are substituted with a surrogate, usually acting as a black-box mapping between macroscale quantities. These models offer significant speedups but struggle with incorporating microscale physical constraints, such as the balance of linear momentum and constitutive models. In this contribution, we propose Equilibrium Neural Operator (EquiNO) as a complementary physics-informed PDE surrogate for predicting microscale physics and compare it with variational physics-informed neural and operator networks. Our framework, applicable to the so-called multiscale FE^{,2}, computations, introduces the FE-OL approach by integrating the finite element (FE) method with operator learning (OL). We apply the proposed FE-OL approach to quasi-static problems of solid mechanics. The results demonstrate that FE-OL can yield accurate solutions even when confronted with a restricted dataset during model development. Our results show that EquiNO achieves speedup factors exceeding 8000-fold compared to traditional methods and offers an optimal balance between data-driven and physics-based strategies.

High-fidelity scientific simulations are now producing unprecedented amounts of data, creating a storage and analysis bottleneck. A single simulation can generate tremendous data volumes, often forcing researchers to discard valuable information. A prime example of this is plasma turbulence described by the gyrokinetic equations: nonlinear, multiscale, and 5D in phase space. It constitutes one of the most computationally demanding frontiers of modern science, with runs taking weeks and yielding tens of terabytes of data dumps. The increasing storage demands underscore the importance of compression. However, reconstructed snapshots do not necessarily preserve essential physical quantities. We present a spatiotemporal evaluation pipeline, accounting for structural phenomena and multi-scale transient fluctuations to assess the degree of physical fidelity. Indeed, we find that various compression techniques lack preservation of both spatial mode structure and temporal turbulence characteristics. Therefore, we explore Physics-Informed Neural Compression (PINC), which incorporates physics-informed losses tailored to gyrokinetics and enables extreme compressions ratios of over 70,000x. Entropy coding on top of PINC further pushes it to 120,000x. This direction provides a viable and scalable solution to the prohibitive storage demands of gyrokinetics, enabling post-hoc analyses that were previously infeasible.

Recent advances in video generation have opened new avenues for macroscopic simulation of complex dynamic systems, but their application to microscopic phenomena remains largely unexplored. Microscale simulation holds great promise for biomedical applications such as drug discovery, organ-on-chip systems, and disease mechanism studies, while also showing potential in education and interactive visualization. In this work, we introduce MicroWorldBench, a multi-level rubric-based benchmark for microscale simulation tasks. MicroWorldBench enables systematic, rubric-based evaluation through 459 unique expert-annotated criteria spanning multiple microscale simulation task (e.g., organ-level processes, cellular dynamics, and subcellular molecular interactions) and evaluation dimensions (e.g., scientific fidelity, visual quality, instruction following). MicroWorldBench reveals that current SOTA video generation models fail in microscale simulation, showing violations of physical laws, temporal inconsistency, and misalignment with expert criteria. To address these limitations, we construct MicroSim-10K, a high-quality, expert-verified simulation dataset. Leveraging this dataset, we train MicroVerse, a video generation model tailored for microscale simulation. MicroVerse can accurately reproduce complex microscale mechanism. Our work first introduce the concept of Micro-World Simulation and present a proof of concept, paving the way for applications in biology, education, and scientific visualization. Our work demonstrates the potential of educational microscale simulations of biological mechanisms. Our data and code are publicly available at https://github.com/FreedomIntelligence/MicroVerse

Crystal structure generation is a foundational challenge in materials discovery, particularly in designing functional inorganic crystalline materials with desired properties. Most existing diffusion-based generative models for crystals rely on complex, hand-crafted priors and modular architectures to separately model atom types, atomic positions, and lattice parameters. These methods often require customized diffusion processes and conditional denoising, which can introduce additional model complexities and inconsistencies. Here we introduce DiffCrysGen, a fully data-driven, score-based diffusion model that jointly learns the distribution of all structural components in crystalline materials. With crystal structure representation as unified 2D matrices, DiffCrysGen bypasses the need for task-specific priors or decoupled modules, enabling end-to-end generation of atom types, fractional coordinates, and lattice parameters within a single framework. Our model learns crystallographic symmetry and chemical validity directly from large-scale datasets, allowing it to scale to complex materials discovery tasks. As a demonstration, we applied DiffCrysGen to the design of rare-earth-free magnetic materials with high saturation magnetization, showing its effectiveness in generating stable, diverse, and property-aligned candidates for sustainable magnet applications.

Here we present a machine learning framework and model implementation that can learn to simulate a wide variety of challenging physical domains, involving fluids, rigid solids, and deformable materials interacting with one another. Our framework---which we term "Graph Network-based Simulators" (GNS)---represents the state of a physical system with particles, expressed as nodes in a graph, and computes dynamics via learned message-passing. Our results show that our model can generalize from single-timestep predictions with thousands of particles during training, to different initial conditions, thousands of timesteps, and at least an order of magnitude more particles at test time. Our model was robust to hyperparameter choices across various evaluation metrics: the main determinants of long-term performance were the number of message-passing steps, and mitigating the accumulation of error by corrupting the training data with noise. Our GNS framework advances the state-of-the-art in learned physical simulation, and holds promise for solving a wide range of complex forward and inverse problems.

How momentum, energy, and magnetic fields are transported in the presence of macroscopic gradients is a fundamental question in plasma physics. Answering this question is especially challenging for weakly collisional, magnetized plasmas, where macroscopic gradients influence the plasma's microphysical structure. In this paper, we introduce thermodynamic forcing, a new method for systematically modeling how macroscopic gradients in magnetized or unmagnetized plasmas shape the distribution functions of constituent particles. In this method, we propose to apply an anomalous force to those particles inducing the anisotropy that would naturally emerge due to macroscopic gradients in weakly collisional plasmas. We implement thermodynamic forcing in particle-in-cell (TF-PIC) simulations using a modified Vay particle pusher and validate it against analytic solutions of the equations of motion. We then carry out a series of simulations of electron-proton plasmas with periodic boundary conditions using TF-PIC. First, we confirm that the properties of two electron-scale kinetic instabilities -- one driven by a temperature gradient and the other by pressure anisotropy -- are consistent with previous results. Then, we demonstrate that in the presence of multiple macroscopic gradients, the saturated state can differ significantly from current expectations. This work enables, for the first time, systematic and self-consistent transport modeling in weakly collisional plasmas, with broad applications in astrophysics, laser-plasma physics, and inertial confinement fusion.

Generative models have advanced significantly in sampling material systems with continuous variables, such as atomistic structures. However, their application to discrete variables, like atom types or spin states, remains underexplored. In this work, we introduce a Boltzmann generator built on discrete flow matching, specifically tailored for systems with discrete phase-space coordinates (e.g., the Ising model or crystalline compounds). This approach enables a single model to sample free energy surfaces over a wide temperature range with minimal training overhead. In addition, the model generation is scalable to larger lattice sizes than those in the training set. We demonstrate the effectiveness of our approach on the 2D Ising model, showing efficient and reliable free energy sampling. This framework provides a scalable and computationally efficient solution for discrete coordinate systems and can be extended to sample the alchemical degrees of freedom in crystalline compounds.

The magnetic phase diagram at zero external field of an ensemble of dipoles with uniaxial anisotropy on a FCC lattice is investigated from tempered Monte Carlo simulations. The uniaxial anisotropy is characterized by a random distribution of easy axes and its magnitude lambda_u is the driving force of disorder and consequently frustration. The phase diagram, separating the paramagnetic, ferromagnetic, quasi long range ordered ferromagnetic and spin-glass regions is thus considered in the temperature, lambda_u plane. This system is aimed at modeling the magnetic phase diagram of supracrystals of magnetic nanoparticles.

Maxwell's equations, a system of linear partial differential equations (PDEs), describe the behavior of electric and magnetic fields in time and space and are essential for many important electromagnetic applications. Although numerical methods have been applied successfully in the past, the primary challenge in solving these equations arises from the frequency of electromagnetic fields, which depends on the shape and size of the objects to be resolved. Since the domain of influence for these equations is compactly supported, even a small perturbation in frequency necessitates a new discretization of Maxwell's equations, resulting in substantial computational costs. In this work, we investigate the potential of neural operators, particularly the Deep Operator Network (DeepONet) and its variants, as a surrogate model for Maxwell's equations. Existing DeepONet implementations are restricted to real-valued data in R^n, but since the time-harmonic Maxwell's equations yield solutions in the complex domain C^n, a specialized architecture is required to handle complex algebra. We propose a formulation of DeepONet for complex data, define the forward pass in the complex domain, and adopt a reparametrized version of DeepONet for more efficient training. We also propose a unified framework to combine a plurality of DeepONets, trained for multiple electromagnetic field components, to incorporate the boundary condition. We conduct computational experiments on a 3D metallic sphere without singularities and on a metallic almond-shaped target to demonstrate the effectiveness of the proposed method for problems involving singularity-prone solutions. As shown by computational experiments, our method significantly enhances the efficiency of predicting scattered fields from a spherical object at arbitrary high frequencies.

We introduce a technique for extracting microstructural geometry from NMR lineshape analysis in porous materials at angstrom-scale resolution with the use of weak magnetic field gradients. Diverging from the generally held view of FID signals undergoing simple exponential decay, we show that a detailed analysis of the line shape can unravel structural geometry on much smaller scales than previously thought. While the original q-space PFG NMR relies on strong magnetic field gradients in order to achieve high spatial resolution, our current approach reaches comparable or higher resolution using much weaker gradients. As a model system, we simulated gas diffusion for xenon confined within carbon nanotubes over a range of temperatures and nanotube diameters in order to unveil manifestations of confinement in the diffusion behavior. We report a multiscale scheme that couples the above MD simulations with the generalized Langevin equation to estimate the transport properties of interest for this problem, such as diffusivity coefficients and NMR lineshapes, using the Green-Kubo correlation function to correctly evaluate time-dependent diffusion. Our results highlight how NMR methodologies can be adapted as effective means towards structural investigation at very small scales when dealing with complicated geometries. This method is expected to find applications in materials science, catalysis, biomedicine and other areas.

We investigate Josephson arrays consisting of a dice-lattice network of superconducting weak links surrounding rhombic plaquettes of proximitized semiconductor. Josephson coupling of the weak links and electron density in the plaquettes are independently controlled by separate electrostatic gates. Applied magnetic flux results in an intricate pattern of switching currents associated with frustration, f. For depleted plaquettes, the switching current is nearly periodic in f, expected for a phase-only description, while occupied plaquettes yield a decreasing envelope of switching currents with increasing f. A model of flux dependence based on ballistic small-area junctions and diffusive large-area plaquettes yields excellent agreement with experiment.

We propose a physics-informed neural particle method (PINN--PM) for the spatially homogeneous Landau equation. The method adopts a Lagrangian interacting-particle formulation and jointly parameterizes the time-dependent score and the characteristic flow map with neural networks. Instead of advancing particles through explicit time stepping, the Landau dynamics is enforced via a continuous-time residual defined along particle trajectories. This design removes time-discretization error and yields a mesh-free solver that can be queried at arbitrary times without sequential integration. We establish a rigorous stability analysis in an L^2_v framework. The deviation between learned and exact characteristics is controlled by three interpretable sources: (i) score approximation error, (ii) empirical particle approximation error, and (iii) the physics residual of the neural flow. This trajectory estimate propagates to density reconstruction, where we derive an L^2_v error bound for kernel density estimators combining classical bias--variance terms with a trajectory-induced contribution. Using Hyvarinen's identity, we further relate the oracle score-matching gap to the L^2_v score error and show that the empirical loss concentrates at the Monte Carlo rate, yielding computable a posteriori accuracy certificates. Numerical experiments on analytical benchmarks, including the two- and three-dimensional BKW solutions, as well as reference-free configurations, demonstrate stable transport, preservation of macroscopic invariants, and competitive or improved accuracy compared with time-stepping score-based particle and blob methods while using significantly fewer particles.

Molecular dynamics simulation of plasma-surface interactions requires an interatomic potential that is simultaneously accurate, computationally efficient, and able to describe many elements and bonding types in reactive systems. In principle, a foundation model for machine-learned interatomic potential (MLIP) can meet these demands. We explore the use of the Universal Models for Atoms (UMA) model, developed by Meta FAIR, for the interactions of oxygen plasma species on a multilayer of WS_2, a promising 2D material. Starting from the pretrained uma-s-1p1 model under the Open Catalyst 2020 (OC20) task, we apply an iterative fine-tuning loop with maximally diverse configuration sampling using Smooth Overlap of Atomic Positions (SOAP) and Farthest Point Sampling (FPS); DFT labeling at the PBE+D3+U+spin level; and fine-tuning on energy, force, and stress labels. Even in the absence of fine-tuning, the pretrained model reproduces the production-scale observables of interest, namely, chemisorbed S and O coverage under 15eV O^+ and O_2^+ bombardment. These results were obtained without spin polarization and Hubbard U correction. Nonetheless, fine-tuning reduces the energy and force mean absolute error (MAE) to 4.5times10^{-3}eV/atom and 0.076eV/angstrom, respectively.

Geomagnetic map interpolation aims to infer unobserved geomagnetic data at spatial points, yielding critical applications in navigation and resource exploration. However, existing methods for scattered data interpolation are not specifically designed for geomagnetic maps, which inevitably leads to suboptimal performance due to detection noise and the laws of physics. Therefore, we propose a Physics-informed Diffusion Generation framework~(PDG) to interpolate incomplete geomagnetic maps. First, we design a physics-informed mask strategy to guide the diffusion generation process based on a local receptive field, effectively eliminating noise interference. Second, we impose a physics-informed constraint on the diffusion generation results following the kriging principle of geomagnetic maps, ensuring strict adherence to the laws of physics. Extensive experiments and in-depth analyses on four real-world datasets demonstrate the superiority and effectiveness of each component of PDG.

The design of functional materials with desired properties is essential in driving technological advances in areas like energy storage, catalysis, and carbon capture. Generative models provide a new paradigm for materials design by directly generating entirely novel materials given desired property constraints. Despite recent progress, current generative models have low success rate in proposing stable crystals, or can only satisfy a very limited set of property constraints. Here, we present MatterGen, a model that generates stable, diverse inorganic materials across the periodic table and can further be fine-tuned to steer the generation towards a broad range of property constraints. To enable this, we introduce a new diffusion-based generative process that produces crystalline structures by gradually refining atom types, coordinates, and the periodic lattice. We further introduce adapter modules to enable fine-tuning towards any given property constraints with a labeled dataset. Compared to prior generative models, structures produced by MatterGen are more than twice as likely to be novel and stable, and more than 15 times closer to the local energy minimum. After fine-tuning, MatterGen successfully generates stable, novel materials with desired chemistry, symmetry, as well as mechanical, electronic and magnetic properties. Finally, we demonstrate multi-property materials design capabilities by proposing structures that have both high magnetic density and a chemical composition with low supply-chain risk. We believe that the quality of generated materials and the breadth of MatterGen's capabilities represent a major advancement towards creating a universal generative model for materials design.

A domain wall (DW) which moves parallel to a magnetically compensated interface between an antiferromagnetic insulator (AFMI) and a two-dimensional (2D) metal can pump spin polarization into the metal. It is assumed that localized spins of a collinear AFMI interact with itinerant electrons through their exchange interaction on the interface. We employed the formalism of Keldysh Green's functions for electrons which experience potential and spin-orbit scattering on random impurities. This formalism allows a unified analysis of spin pumping, spin diffusion and spin relaxation effects on a 2D electron gas. It is shown that the pumping of a nonstaggered magnetization into the metal film takes place in the second order with respect to the interface exchange interaction. At sufficiently weak spin relaxation this pumping effect can be much stronger than the first-order effect of the Pauli magnetism which is produced by the small nonstaggered exchange field of the DW. It is shown that the pumped polarization is sensitive to the geometry of the electron's Fermi surface and increases when the wave vector of the staggered magnetization approaches the nesting vector of the Fermi surface. In a disordered diffusive electron gas the induced spin polarization follows the motion of the domain wall. It is distributed asymmetrically around the DW over a distance which can be much larger than the DW width.

Efficient sampling of the Boltzmann distribution in frustrated spin glasses is central to statistical mechanics and combinatorial optimization. Despite advances in machine-learning-based approaches, two issues persist: limited understanding of why variational models fail to benefit from increased scale, unlike the monotonic scaling law of large language models; and high computational cost on large systems that negates advantages over classical sampling methods. Here, we develop a physics-inspired transformer with interpretable sparse attention and spin-tailored positional embeddings to address these challenges. By further leveraging FlashAttention for parallel ancestral sampling, it achieves up to two orders of magnitude speedup over vanilla variational autoregressive networks, enabling neural-network simulations of spin-glass systems to unprecedented sizes on a single GPU. It can resolve full probability distributions, free energies, and overlap statistics across temperatures, for Sherrington-Kirkpatrick and 2D or 3D Edwards-Anderson models, where existing machine-learning methods encounter limitations at certain temperatures. This framework thus establishes a scalable paradigm for frustrated spin-glass systems.

We present a comprehensive numerical study of a six-state clock model with a long-range dipolar type interaction. This model is motivated by the ferroelectric orders in the multiferroic hexagonal manganites. At low temperatures, trimerization of local atomic structures leads to six distinct but energetically degenerate structural distortion, which can be modeled by a six-state clock model. Moreover, the atomic displacements in the trimerized state further produce a local electric polarization whose sign depends on whether the clock variable is even or odd. These induced electric dipoles, which can be modeled by emergent Ising degrees of freedom, interact with each other via long-range dipolar interactions. Extensive Monte Carlo simulations are carried out to investigate low temperature phases resulting from the competing interactions. Upon lowering temperature, the system undergoes two Berezinskii-Kosterlitz-Thouless (BKT) transitions, characteristic of the standard six-state clock model in two dimensions. The dipolar interaction between emergent Ising spins induces a first-order transition into a ground state characterized by a three-fold degenerate stripe order. The intermediate phase between the discontinuous and the second BKT transition corresponds to a maze-like hexagonal liquid with short-range stripe ordering. Moreover, this intermediate phase also exhibits an unusual ferromagnetic order with two adjacent clock variables occupying the two types of stripes of the labyrinthine pattern.

Partial Differential Equations (PDEs) underpin many scientific phenomena, yet traditional computational approaches often struggle with complex, nonlinear systems and irregular geometries. This paper introduces the AMG method, a Multi-Graph neural operator approach designed for efficiently solving PDEs on Arbitrary geometries. AMG leverages advanced graph-based techniques and dynamic attention mechanisms within a novel GraphFormer architecture, enabling precise management of diverse spatial domains and complex data interdependencies. By constructing multi-scale graphs to handle variable feature frequencies and a physics graph to encapsulate inherent physical properties, AMG significantly outperforms previous methods, which are typically limited to uniform grids. We present a comprehensive evaluation of AMG across six benchmarks, demonstrating its consistent superiority over existing state-of-the-art models. Our findings highlight the transformative potential of tailored graph neural operators in surmounting the challenges faced by conventional PDE solvers. Our code and datasets are available on https://github.com/lizhihao2022/AMG.

Machine-learning (ML) force fields enable large-scale simulations with near-first-principles accuracy at substantially reduced computational cost. Recent work has extended ML force-field approaches to adiabatic dynamical simulations of condensed-matter lattice models with coupled electronic and structural or magnetic degrees of freedom. However, most existing formulations rely on hand-crafted, symmetry-aware descriptors, whose construction is often system-specific and can hinder generality and transferability across different lattice Hamiltonians. Here we introduce a symmetry-preserving framework based on equivariant neural networks (ENNs) that provides a general, data-driven mapping from local configurations of dynamical variables to the associated on-site forces in a lattice Hamiltonian. In contrast to ENN architectures developed for molecular systems -- where continuous Euclidean symmetries dominate -- our approach aims to embed the discrete point-group and internal symmetries intrinsic to lattice models directly into the neural-network representation of the force field. As a proof of principle, we construct an ENN-based force-field model for the adiabatic dynamics of the Holstein Hamiltonian on a square lattice, a canonical system for electron-lattice physics. The resulting ML-enabled large-scale dynamical simulations faithfully capture mesoscale evolution of the symmetry-breaking phase, illustrating the utility of lattice-equivariant architectures for linking microscopic electronic processes to emergent dynamical behavior in condensed-matter lattice systems.

We use two-dimensional particle-in-cell simulations to investigate the generation and evolution of the magnetic field associated with the propagation of a jet for various initial conditions. We demonstrate that, in general, the magnetic field is initially grown by the Weibel and Mushroom instabilities. However, the field is saturated by the Alfv'en current limit. For initially non-magnetized plasma, we show that the growth of the magnetic field is delayed when the matter density of the jet environment is lower, which are in agreement with simple analytical predictions. We show that the higher Lorentz factor (gtrsim 2) prevents rapid growth of the magnetic fields. When the initial field is troidal, the position of the magnetic filaments moves away from the jet as the field strength increases. The axial initial field helps the jet maintain its shape more effectively than the troidal initial field.

Context. Radiation plays a significant role in solar and astrophysical environments as it may constitute a sizeable fraction of the energy density, momentum flux, and the total pressure. Modelling the dynamic interaction between radiation and magnetized plasmas in such environments is an intricate and computationally costly task. Aims. The goal of this work is to demonstrate the capabilities of the open-source parallel, block-adaptive computational framework MPI-AMRVAC, in solving equations of radiation-magnetohydrodynamics (RMHD), and to present benchmark test cases relevant for radiation-dominated magnetized plasmas. Methods. The existing magnetohydrodynamics (MHD) and flux-limited diffusion (FLD) radiative-hydrodynamics physics modules are combined to solve the equations of radiation-magnetohydrodynamics (RMHD) on block-adaptive finite volume Cartesian meshes in any dimensionality. Results. We introduce and validate several benchmark test cases such as steady radiative MHD shocks, radiation-damped linear MHD waves, radiation-modified Riemann problems and a multi-dimensional radiative magnetoconvection case. We recall the basic governing Rankine-Hugoniot relations for shocks and the dispersion relation for linear MHD waves in the presence of optically thick radiation fields where the diffusion limit is reached. The RMHD system allows for 8 linear wave types, where the classical 7-wave MHD picture (entropy and three wave pairs for slow, Alfven and fast) is augmented with a radiative diffusion mode. Conclusions. The MPI-AMRVAC code now has the capability to perform multidimensional RMHD simulations with mesh adaptation making it well-suited for larger scientific applications to study magnetized matter-radiation interactions in solar and stellar interiors and atmospheres.

Mimicking realistic dynamics in 3D garment animations is a challenging task due to the complex nature of multi-layered garments and the variety of outer forces involved. Existing approaches mostly focus on single-layered garments driven by only human bodies and struggle to handle general scenarios. In this paper, we propose a novel data-driven method, called LayersNet, to model garment-level animations as particle-wise interactions in a micro physics system. We improve simulation efficiency by representing garments as patch-level particles in a two-level structural hierarchy. Moreover, we introduce a novel Rotation Equivalent Transformation that leverages the rotation invariance and additivity of physics systems to better model outer forces. To verify the effectiveness of our approach and bridge the gap between experimental environments and real-world scenarios, we introduce a new challenging dataset, D-LAYERS, containing 700K frames of dynamics of 4,900 different combinations of multi-layered garments driven by both human bodies and randomly sampled wind. Our experiments show that LayersNet achieves superior performance both quantitatively and qualitatively. We will make the dataset and code publicly available at https://mmlab-ntu.github.io/project/layersnet/index.html .

We carried out numerical simulations of propagation of spin waves (magnons in quantum language) in a yttrium-iron garnet film. The numerical model is based on an original formalism. We demonstrated that a potential barrier for magnons, created by an Oersted field of a dc current flowing through a wire sitting on top of the film, is able to act as an electrically controlled partly transparent mirror for the magnons. We found that the mirror transparency can be set to 50% by properly adjusting the current strength, thus creating a semi-transparent mirror. A strong Hong-Ou-Mandel Effect for single magnons is expected in this configuration. The effect must be seen as two single magnons, launched simultaneously into the film from two transducers located from the opposite sides of the mirror, creating a two-microwave-photon state at the output port of one of the transducers. The probability of seeing those two-photon states at the output port of either transducer must be the same for both transducers.

The strong coupling between magnetism and ferroelectricity was found in rare earth manganites, where the electric polarization could be induced by special magnetic ordering. There is no theoretical model that would allow us to study the static and dynamic properties of electric polarization in strongly correlated magnetic dielectrics. In the presented research, we have taken the main step towards the construction of such a fundamental model, and made a direct connection between the microscopic Katsura-Nagaosa-Balatsky theory and Mostovoy's phenomenological model for magnetically induced polarization. A novel description of the ferroelectricity of spin origin is proposed within the framework of the many-particle quantum hydrodynamics method. It is applied to the study of cells of magnetic ions, where the electric dipole moment is proportional to the vector product of spins. Our approach is based on the many-particle Pauli equation, where the influence of an external magnetic field is considered. We define the electric dipole moment operator of the ion cell and introduce the macroscopic polarization as the quantum mechanical average of that operator. We formulate a model for the description of nonequilibrium polarization and derive a new polarization evolution equation. The polarization switching in ferroelectric magnets with the spiral spin-density-wave state is considered, and we demonstrate that the proposed model yields known results and can predict novel effects. The dynamic magnetoelectric effect can be investigated by employing this novel equation to study the evolution of polarization.

Relativistic magnetic turbulence has been proposed as a process for producing nonthermal particles in high-energy astrophysics. Particle energization may be contributed by both magnetic reconnection and turbulent fluctuations, but their interplay is poorly understood. It has been suggested that during magnetic reconnection the parallel electric field dominates particle acceleration up to the lower bound of the power-law particle spectrum, but recent studies show that electric fields perpendicular to magnetic field can play an important, if not dominant role. In this study, we carry out 2D fully kinetic particle-in-cell simulations of magnetically dominated decaying turbulence in a relativistic pair plasma. For a fixed magnetization parameter sigma_0=20, we find that the injection energy {varepsilon}_{rm inj} converges with increasing domain size to {varepsilon}_{rm inj}simeq 10m_ec^2. In contrast, the power-law index, the cut-off energy, and the power-law extent increase steadily with domain size. We trace a large number of particles and evaluate the contributions of the work done by the parallel (W_parallel) and perpendicular (W_perp) electric fields during both the injection phase and the post-injection phase. We find that during the injection phase, the W_perp contribution increases with domain size, suggesting that it may eventually dominate injection for a sufficiently large domain. In contrast, both components contribute equally during the post-injection phase, insensitive to the domain size. For high energy ({varepsilon}varepsilon_{rm inj}) particles, W_perp dominates the subsequent energization. These findings may improve our understanding of nonthermal particles and their emissions in astrophysical plasmas.

Recent advances in deep learning have inspired numerous works on data-driven solutions to partial differential equation (PDE) problems. These neural PDE solvers can often be much faster than their numerical counterparts; however, each presents its unique limitations and generally balances training cost, numerical accuracy, and ease of applicability to different problem setups. To address these limitations, we introduce several methods to apply latent diffusion models to physics simulation. Firstly, we introduce a mesh autoencoder to compress arbitrarily discretized PDE data, allowing for efficient diffusion training across various physics. Furthermore, we investigate full spatio-temporal solution generation to mitigate autoregressive error accumulation. Lastly, we investigate conditioning on initial physical quantities, as well as conditioning solely on a text prompt to introduce text2PDE generation. We show that language can be a compact, interpretable, and accurate modality for generating physics simulations, paving the way for more usable and accessible PDE solvers. Through experiments on both uniform and structured grids, we show that the proposed approach is competitive with current neural PDE solvers in both accuracy and efficiency, with promising scaling behavior up to sim3 billion parameters. By introducing a scalable, accurate, and usable physics simulator, we hope to bring neural PDE solvers closer to practical use.

Explicit magnetic core loss equations with simple expressions and physical interpretability are significant tools in the design of high-frequency power magnetics. Traditional fits to empirical data like the Steinmetz Equation (SE) often struggle with accuracy, whereas modern machine learning approaches improve precision but deviate from physics. To fill this gap, this paper proposes a Learnable Symbolic Sparse Identification (LSSI) framework for data-driven equation discovery. Specifically, LSSI reformulates magnetic core loss equations for sinusoidal drives as a symbolic regression problem derived directly from experimental data. Building upon the SE, an expanded library of candidate functions are introduced and a sparse identification framework is implemented to select the dominant ones. More importantly, crucial parameters like exponents and coefficients of candidate functions are treated as learnable ones, simultaneously achieving equation simplicity and high expressiveness of the underlying fractional power laws. Experimental results demonstrate that LSSI achieves superior accuracy with a state-of-the-art R^2 of 0.9999 and a MAPE of 1.04% through a highly compact explicit equation containing only 4 active terms. Furthermore, it drastically reduces the parameter count from 4417 in neural network methods to 15, showcasing exceptional compactness and efficiency. The LSSI framework thus provides a physically transparent and highly accurate solution suitable for complex modern magnetic characterization and design.

Technologies that function at room temperature often require magnets with a high Curie temperature, T_C, and can be improved with better materials. Discovering magnetic materials with a substantial T_C is challenging because of the large number of candidates and the cost of fabricating and testing them. Using the two largest known data sets of experimental Curie temperatures, we develop machine-learning models to make rapid T_C predictions solely based on the chemical composition of a material. We train a random forest model and a k-NN one and predict on an initial dataset of over 2,500 materials and then validate the model on a new dataset containing over 3,000 entries. The accuracy is compared for multiple compounds' representations ("descriptors") and regression approaches. A random forest model provides the most accurate predictions and is not improved by dimensionality reduction or by using more complex descriptors based on atomic properties. A random forest model trained on a combination of both datasets shows that cobalt-rich and iron-rich materials have the highest Curie temperatures for all binary and ternary compounds. An analysis of the model reveals systematic error that causes the model to over-predict low-T_C materials and under-predict high-T_C materials. For exhaustive searches to find new high-T_C materials, analysis of the learning rate suggests either that much more data is needed or that more efficient descriptors are necessary.

Most artificial life simulators either operate on abstract substrates disconnected from physical reality, or simulate physically grounded worlds that do not scale to the population sizes required for open-ended evolution. We present Microcosmos, a simulation engine in which artificial lifeforms are modeled as elastic filament chains inhabiting a two-dimensional viscous fluid world, designed from the ground up for modern GPU hardware and end-to-end differentiable simulation. We validate the engine through four experiments. Hand-designed locomotion strategies confirm that the fluid coupling respects known physical constraints. Gradient-based optimization of filament folding demonstrates both the full differentiability of the simulator and the expressivity of the filament encodings. Neuroevolution and quality-diversity search produce a wide range of swimming and chemotaxis behaviors automatically. Linear scaling with particle count confirms the engine supports large-scale simulation. Microcosmos is released as an open platform with the long-term goal of supporting large-scale open-ended evolutionary simulations, designed to be physically plausible and computationally scalable.

We introduce PDE-Transformer, an improved transformer-based architecture for surrogate modeling of physics simulations on regular grids. We combine recent architectural improvements of diffusion transformers with adjustments specific for large-scale simulations to yield a more scalable and versatile general-purpose transformer architecture, which can be used as the backbone for building large-scale foundation models in physical sciences. We demonstrate that our proposed architecture outperforms state-of-the-art transformer architectures for computer vision on a large dataset of 16 different types of PDEs. We propose to embed different physical channels individually as spatio-temporal tokens, which interact via channel-wise self-attention. This helps to maintain a consistent information density of tokens when learning multiple types of PDEs simultaneously. We demonstrate that our pre-trained models achieve improved performance on several challenging downstream tasks compared to training from scratch and also beat other foundation model architectures for physics simulations.

Comprehensive study using DC transport, specific heat, magnetization, and two-coil mutual inductance measurements unveils an understanding of three temperature regimes in SmB_6: (i) T geq T^{*} (sim66K), (ii) T_g (sim40 K) leq T < T^{*}, and (iii) T < T_g. Onset of Kondo breakdown below T^{*} releases disorder-driven magnetic fluctuations, which splits the bulk (sim116K) and surface Kondo temperature (T_k^{s} approx 7 K). Below T_g, as magnetic fluctuations subside, surface Kondo screening revives, stabilizing the topological surface state and generating an in-gap feature (sim2.2 meV) across which Dirac-like carriers are excited. Nyquist impedance analysis reveals a crossover from purely capacitive to capacitive-inductive behavior, signalling a disorder-driven two-fluid phase of heavy quasiparticles and light, high-mobility carriers below T_g. We identify a characteristic length scale, L_{ν_0}(T), associated with the high-mobility phase, exhibiting an almost divergent trend below T_k^{s}. These findings underscore the complex nature of the surface conducting state in SmB_6.

We propose fine-tuning large language models for generation of stable materials. While unorthodox, fine-tuning large language models on text-encoded atomistic data is simple to implement yet reliable, with around 90% of sampled structures obeying physical constraints on atom positions and charges. Using energy above hull calculations from both learned ML potentials and gold-standard DFT calculations, we show that our strongest model (fine-tuned LLaMA-2 70B) can generate materials predicted to be metastable at about twice the rate (49% vs 28%) of CDVAE, a competing diffusion model. Because of text prompting's inherent flexibility, our models can simultaneously be used for unconditional generation of stable material, infilling of partial structures and text-conditional generation. Finally, we show that language models' ability to capture key symmetries of crystal structures improves with model scale, suggesting that the biases of pretrained LLMs are surprisingly well-suited for atomistic data.

The field of plasma physics heavily relies on simulations to model various phenomena, such as instabilities, turbulence, and nonlinear behaviors that would otherwise be difficult to study from a purely theoretical approach. Simulations are fundamental in accurately setting up experiments, which can be extremely costly and complex. As high-fidelity tools, gyrokinetic simulations play a crucial role in discovering new physics, interpreting experimental results, and improving the design of next-generation devices. However, their high computational costs necessitate the use of acceleration platforms to reduce execution time. This work revolves around the TRIangular MEsh based Gyrokinetic (TRIMEG) code, which performs high-accuracy particle-in-cell plasma simulations in tokamak geometries, leveraging a novel finite element approach. The rise of graphical processing units (GPUs) constitutes an occasion to satisfy such computational needs, by offloading the most expensive portion of the code to the accelerators. The chosen approach features GPU offloading with the OpenMP API, which grants portability of the code to different architectures, namely AMD and NVIDIA. The particle pushing as well as the grid-to-particle operations have been ported to GPU platforms. Compiler limitations had to be overcome, and portions of the code were restructured to be suitable for GPU acceleration. Kernel performance was evaluated by carrying out GPU grid size exploration, as well as scalability studies. In addition, the efficiency of hybrid MPI-OpenMP offloading parallelization was assessed. The speedup of the GPU implementation was calculated by comparing it with the pure CPU version using different rationales. The Ion Temperature Gradient (ITG) mode was simulated using the GPU-accelerated version, and its correctness was verified in terms of the energy growth rate and the two-dimensional mode structures.

Machine-learning interatomic potentials (MLIPs) have advanced rapidly, with many top models relying on strong physics-based inductive biases. However, as models scale to larger systems like biomolecules and electrolytes, they struggle to accurately capture long-range (LR) interactions, leading current approaches to rely on explicit physics-based terms or components. In this work, we propose AllScAIP, a straightforward, attention-based, and energy-conserving MLIP model that scales to O(100 million) training samples. It addresses the long-range challenge using an all-to-all node attention component that is data-driven. Extensive ablations reveal that in low-data/small-model regimes, inductive biases improve sample efficiency. However, as data and model size scale, these benefits diminish or even reverse, while all-to-all attention remains critical for capturing LR interactions. Our model achieves state-of-the-art energy/force accuracy on molecular systems, as well as a number of physics-based evaluations (OMol25), while being competitive on materials (OMat24) and catalysts (OC20). Furthermore, it enables stable, long-timescale MD simulations that accurately recover experimental observables, including density and heat of vaporization predictions.

The presence of thermal gradients in alloys often leads to non-uniformity in concentration profiles, which can induce the thermomigration of microstructural features such as precipitates. To investigate such microstructural changes, we present a phase-field model that incorporates coupling between concentration and thermal gradients. First, we simulated the evolution of non-uniform concentration profiles in the single-phase regions of Fe-C and Fe-N alloy systems due to imposed thermal gradients. To validate our model with the classical experiments performed by Darken and Oriani, we studied the evolution of spatially varying concentration profiles where thermal gradients encompass single-phase and two-phase regions. We developed a parameterized thermodynamic description of the two-phase region of a binary alloy to systematically study the effect of interactions between chemically-driven and thermal gradient-driven diffusion of solute on the evolution of precipitates. Our simulations show how thermal gradient, precipitate size, and interparticle distance influence the migration and associated morphological changes of precipitates. The composition profiles and migration rates obtained from single-particle simulations show an exact match with our analytical model. We use twoparticle simulations to show conditions under which thermomigration induces the growth of the smaller particle and shrinkage of the larger one in contrast to the isothermal Ostwald ripening behavior. Our multiparticle simulations show similar behavior during coarsening. Moreover, in the presence of a thermal gradient, there is a shift in the center of mass of the precipitates towards the high-temperature region. Thus, our study offers new insights into the phenomena of microstructure evolution in the presence of thermal gradient.

Implicit Neural Spatial Representation (INSR) has emerged as an effective representation of spatially-dependent vector fields. This work explores solving time-dependent PDEs with INSR. Classical PDE solvers introduce both temporal and spatial discretizations. Common spatial discretizations include meshes and meshless point clouds, where each degree-of-freedom corresponds to a location in space. While these explicit spatial correspondences are intuitive to model and understand, these representations are not necessarily optimal for accuracy, memory usage, or adaptivity. Keeping the classical temporal discretization unchanged (e.g., explicit/implicit Euler), we explore INSR as an alternative spatial discretization, where spatial information is implicitly stored in the neural network weights. The network weights then evolve over time via time integration. Our approach does not require any training data generated by existing solvers because our approach is the solver itself. We validate our approach on various PDEs with examples involving large elastic deformations, turbulent fluids, and multi-scale phenomena. While slower to compute than traditional representations, our approach exhibits higher accuracy and lower memory consumption. Whereas classical solvers can dynamically adapt their spatial representation only by resorting to complex remeshing algorithms, our INSR approach is intrinsically adaptive. By tapping into the rich literature of classic time integrators, e.g., operator-splitting schemes, our method enables challenging simulations in contact mechanics and turbulent flows where previous neural-physics approaches struggle. Videos and codes are available on the project page: http://www.cs.columbia.edu/cg/INSR-PDE/

The one-dimensional J_1-J_2 q-state Potts model is solved exactly for arbitrary q, based on using OpenAI's latest reasoning model o3-mini-high to exactly solve the q=3 case. The exact results provide insights to outstanding physical problems such as the stacking of atomic or electronic orders in layered materials and the formation of a T_c-dome-shaped phase often seen in unconventional superconductors. The work is anticipated to fuel both the research in one-dimensional frustrated magnets for recently discovered finite-temperature application potentials and the fast moving topic area of AI for sciences.

We present an open-source database of superconducting quantum device designs that may be used as the starting point for customized devices. Each design can be generated programmatically using the open-source Qiskit Metal package, and simulated using finite-element electromagnetic solvers. We present a robust workflow for achieving high accuracy on design simulations. Many designs in the database are experimentally validated, showing excellent agreement between simulated and measured parameters. Our database includes a front-end interface that allows users to generate ``best-guess'' designs based on desired circuit parameters. This project lowers the barrier to entry for research groups seeking to make a new class of devices by providing them a well-characterized starting point from which to refine their designs.

The discoveries of intrinsically magnetic topological materials, including semimetals with a large anomalous Hall effect and axion insulators, have directed fundamental research in solid-state materials. Topological quantum chemistry has enabled the understanding of and the search for paramagnetic topological materials. Using magnetic topological indices obtained from magnetic topological quantum chemistry (MTQC), here we perform a high-throughput search for magnetic topological materials based on first-principles calculations. We use as our starting point the Magnetic Materials Database on the Bilbao Crystallographic Server, which contains more than 549 magnetic compounds with magnetic structures deduced from neutron-scattering experiments, and identify 130 enforced semimetals (for which the band crossings are implied by symmetry eigenvalues), and topological insulators. For each compound, we perform complete electronic structure calculations, which include complete topological phase diagrams using different values of the Hubbard potential. Using a custom code to find the magnetic co-representations of all bands in all magnetic space groups, we generate data to be fed into the algorithm of MTQC to determine the topology of each magnetic material. Several of these materials display previously unknown topological phases, including symmetry-indicated magnetic semimetals, three-dimensional anomalous Hall insulators and higher-order magnetic semimetals. We analyse topological trends in the materials under varying interactions: 60 per cent of the 130 topological materials have topologies sensitive to interactions, and the others have stable topologies under varying interactions. We provide a materials database for future experimental studies and open-source code for diagnosing topologies of magnetic materials.

Quantitative microstructural characterization is fundamental to materials science, where electron micrograph (EM) provides indispensable high-resolution insights. However, progress in deep learning-based EM characterization has been hampered by the scarcity of large-scale, diverse, and expert-annotated datasets, due to acquisition costs, privacy concerns, and annotation complexity. To address this issue, we introduce UniEM-3M, the first large-scale and multimodal EM dataset for instance-level understanding. It comprises 5,091 high-resolution EMs, about 3 million instance segmentation labels, and image-level attribute-disentangled textual descriptions, a subset of which will be made publicly available. Furthermore, we are also releasing a text-to-image diffusion model trained on the entire collection to serve as both a powerful data augmentation tool and a proxy for the complete data distribution. To establish a rigorous benchmark, we evaluate various representative instance segmentation methods on the complete UniEM-3M and present UniEM-Net as a strong baseline model. Quantitative experiments demonstrate that this flow-based model outperforms other advanced methods on this challenging benchmark. Our multifaceted release of a partial dataset, a generative model, and a comprehensive benchmark -- available at huggingface -- will significantly accelerate progress in automated materials analysis.

We provide a theoretical framework to analyze the properties of frontal collisions of two growing interfaces considering different short range interactions between them. Due to their roughness, the collision events spread in time and form rough domain boundaries, which defines collision interfaces in time and space. We show that statistical properties of such interfaces depend on the kinetics of the growing interfaces before collision, but are independent of the details of their interaction and of their fluctuations during the collision. Those properties exhibit dynamic scaling with exponents related to the growth kinetics, but their distributions may be non-universal. These results are supported by simulations of lattice models with irreversible dynamics and local interactions. Relations to first passage processes are discussed and a possible application to grain boundary formation in two-dimensional materials is suggested.

We present 3D DEM simulations of bidisperse granular packings to investigate their jamming densities, phi_J, and dimensionless bulk moduli, K, as a function of the size ratio, delta, and the concentration of small particles, X_{mathrm S}. We determine the partial and total bulk moduli for each packing and report the jamming transition diagram, i.e., the density or volume fraction marking both the first and second transitions of the system. At a large enough size difference, e.g., delta le 0.22, X^{*}_{mathrm S} divides the diagram with most small particles either non-jammed or jammed jointly with large ones. We find that the bulk modulus K jumps at X^{*}_{mathrm S}(delta = 0.15) approx 0.21, at the maximum jamming density, where both particle species mix most efficiently, while for X_{mathrm S} < X^{*}_{mathrm S} K is decoupled in two scenarios as a result of the first and second jamming transition. Along the second transition, K rises relative to the values found at the first transition, however, is still small compared to K at X^{*}_{mathrm S}. While the first transition is sharp, the second is smooth, carried by small-large interactions, while the small-small contacts display a transition. This demonstrates that for low enough delta and X_{mathrm S}, the jamming of small particles indeed impacts the internal resistance of the system. Our new results will allow tuning the bulk modulus K or other properties, such as the wave speed, by choosing specific sizes and concentrations based on a better understanding of whether small particles contribute to the jammed structure or not, and how the micromechanical structure behaves at either transition.

The ability to generate 3D multiphase microstructures on-demand with targeted attributes can greatly accelerate the design of advanced materials. Here, we present a conditional latent diffusion model (LDM) framework that rapidly synthesizes high-fidelity 3D multiphase microstructures tailored to user specifications. Using this approach, we generate diverse two-phase and three-phase microstructures at high resolution (volumes of 128 times 128 times 64 voxels, representing >10^6 voxels each) within seconds, overcoming the scalability and time limitations of traditional simulation-based methods. Key design features, such as desired volume fractions and tortuosities, are incorporated as controllable inputs to guide the generative process, ensuring that the output structures meet prescribed statistical and topological targets. Moreover, the framework predicts corresponding manufacturing (processing) parameters for each generated microstructure, helping to bridge the gap between digital microstructure design and experimental fabrication. While demonstrated on organic photovoltaic (OPV) active-layer morphologies, the flexible architecture of our approach makes it readily adaptable to other material systems and microstructure datasets. By combining computational efficiency, adaptability, and experimental relevance, this framework addresses major limitations of existing methods and offers a powerful tool for accelerated materials discovery.

The magnetization in a superconductor induced due to the inverse proximity effect is investigated in hybrid bilayers containing a superconductor and a ferromagnetic insulator or a strongly spin-polarized ferromagnetic metal. The study is performed within a quasiclassical Green function framework, wherein Usadel equations are solved with boundary conditions appropriate for strongly spin-polarized ferromagnetic materials. A comparison with recent experimental data is presented. The singlet to triplet conversion of the superconducting correlations as a result of the proximity effect with a ferromagnet is studied.

Machine-learned coarse-grained (CG) models often suffer from noisy training data, limiting their accuracy and transferability. We propose a method to generate low-noise training data based on the potential of mean force by constraining CG beads during atomistic simulations and accumulating time-averaged forces. Implemented within the neuroevolution potential (NEP) framework, our approach achieves training accuracy comparable to atomistic models trained on density functional theory data. For liquid water, the NEP-CG model accurately reproduces densities from 1 bar to 1 GPa, successfully extrapolating beyond the 0.5 GPa training limit, with a virial correction essential for the correct equation of state. For an anisotropic C_{60} monolayer, distinguishing crystallographically distinct bead types reduces stress errors by an order of magnitude and captures directional thermal conductivity. We further introduce a multiscale NEP-AACG model integrating all-atom (AA) and CG degrees of freedom, demonstrated for gold nanowire fracture at an experimentally relevant strain rate. Computational speeds for NEP-CG models reach hundreds to thousands of ns/day using a single consumer-grade GPU. This work provides a robust framework for constructing accurate, transferable, and efficient CG models across diverse systems.

With copper-substituted lead apatite below room temperature, we observe diamagnetic dc magnetization under magnetic field of 25 Oe with remarkable bifurcation between zero-field-cooling and field-cooling measurements, and under 200 Oe it changes to be paramagnetism. A glassy memory effect is found during cooling. Typical hysteresis loops for superconductors are detected below 250 K, along with an asymmetry between forward and backward sweep of magnetic field. Our experiment suggests at room temperature the Meissner effect is possibly present in this material.

We present a novel structure-preserving framework for solving the Vlasov-Poisson-Landau system of equations using a particle in cell (PIC) discretization combined with discrete gradient time integrators. The Vlasov-Poisson-Landau system is an accurate model for studying hot plasma dynamics at a kinetic scale where small-angle Coulomb collisions dominate. Our scheme guarantees conservation of mass, momentum and energy as well as preservation of the monotonicity of entropy production in both the time-continuous and discrete systems. We employ the conservative integrator for both the Hamiltonian Vlasov-Poisson equations and the dissipative Landau equation using the PETSc library (www.mcs.anl.gov/petsc) to showcase structure-preserving properties.

Generative machine learning models can potentially provide direct access to novel and relevant portions of the full chemical space, overcoming the cost of systematic sampling. However, the training of these models generally requires a large amount of data, often precluding the use of expensive high-level ab initio simulations for this task. The generation of coordination compounds of Dy with large magnetic anisotropy represents a topical example, where multireference simulations of large molecules are necessary to perform reliable predictions. Here, we show that a semi-supervised chemically-inspired training-by-proxy of generative variational autoencoders can reduce the cost associated with building a training set from multireference simulations by two orders of magnitude. We illustrate the power of this approach by generating 100s of new organic ligands for Dy(III) pentagonal bipyramidal complexes exhibiting record values of magnetic anisotropy, while starting from datasets as small as 1k multireference calculations. This work thus paves the way to the computational generation of molecules as complex coordination compounds with target electronic and magnetic properties.

We present microlux, which is a Jax-based code that can compute the binary microlensing light curve and its derivatives both efficiently and accurately. The key feature of microlux is the implementation of a modified version of the adaptive sampling algorithm that was originally proposed by V. Bozza to account for the finite-source effect most efficiently. The efficiency and accuracy of microlux have been verified across the relevant parameter space for binary microlensing. As a differentiable code, microlux makes it possible to apply gradient-based algorithms to the search and posterior estimation of the microlensing modeling. As an example, we use microlux to model a real microlensing event and infer the model posterior via both Fisher information matrix and Hamiltonian Monte Carlo, neither of which would have been possible without the access to accurate model gradients.

Foundation models have achieved remarkable success across video, image, and language domains. By scaling up the number of parameters and training datasets, these models acquire generalizable world knowledge and often surpass task-specific approaches. However, such progress has yet to extend to the domain of physics simulation. A primary bottleneck is data scarcity: while millions of images, videos, and textual resources are readily available on the internet, the largest physics simulation datasets contain only tens of thousands of samples. This data limitation hinders the use of large models, as overfitting becomes a major concern. As a result, physics applications typically rely on small models, which struggle with long-range prediction due to limited context understanding. Additionally, unlike images, videos, or text-which typically exhibit fixed granularity-physics datasets often vary drastically in scale, amplifying the challenges of scaling up multitask training. We introduce PhysiX, the first large-scale foundation model for physics simulation. PhysiX is a 4.5B parameter autoregressive generative model. It uses a discrete tokenizer to encode physical processes at different scales into a sequence of discrete tokens, and employs an autoregressive next-token prediction objective to model such processes in the token space. To mitigate the rounding error in the discretization process, PhysiX incorporates a specialized refinement module. Through extensive experiments, we show that PhysiX effectively addresses the data bottleneck, outperforming task-specific baselines under comparable settings as well as the previous absolute state-of-the-art approaches on The Well benchmark. Our results indicate that knowledge learned from natural videos can be successfully transferred to physics simulation, and that joint training across diverse simulation tasks enables synergistic learning.

We introduce featom, an open source code that implements a high-order finite element solver for the radial Schr\"odinger, Dirac, and Kohn-Sham equations. The formulation accommodates various mesh types, such as uniform or exponential, and the convergence can be systematically controlled by increasing the number and/or polynomial order of the finite element basis functions. The Dirac equation is solved using a squared Hamiltonian approach to eliminate spurious states. To address the slow convergence of the kappa=pm1 states due to divergent derivatives at the origin, we incorporate known asymptotic forms into the solutions. We achieve a high level of accuracy (10^{-8} Hartree) for total energies and eigenvalues of heavy atoms such as uranium in both Schr\"odinger and Dirac Kohn-Sham solutions. We provide detailed convergence studies and computational parameters required to attain commonly required accuracies. Finally, we compare our results with known analytic results as well as the results of other methods. In particular, we calculate benchmark results for atomic numbers (Z) from 1 to 92, verifying current benchmarks. We demonstrate significant speedup compared to the state-of-the-art shooting solver dftatom. An efficient, modular Fortran 2008 implementation, is provided under an open source, permissive license, including examples and tests, wherein particular emphasis is placed on the independence (no global variables), reusability, and generality of the individual routines.

Solving partial differential equations (PDEs) with machine learning has recently attracted great attention, as PDEs are fundamental tools for modeling real-world systems that range from fundamental physical science to advanced engineering disciplines. Most real-world physical systems across various disciplines are actually involved in multiple coupled physical fields rather than a single field. However, previous machine learning studies mainly focused on solving single-field problems, but overlooked the importance and characteristics of multiphysics problems in real world. Multiphysics PDEs typically entail multiple strongly coupled variables, thereby introducing additional complexity and challenges, such as inter-field coupling. Both benchmarking and solving multiphysics problems with machine learning remain largely unexamined. To identify and address the emerging challenges in multiphysics problems, we mainly made three contributions in this work. First, we collect the first general multiphysics dataset, the Multiphysics Bench, that focuses on multiphysics PDE solving with machine learning. Multiphysics Bench is also the most comprehensive PDE dataset to date, featuring the broadest range of coupling types, the greatest diversity of PDE formulations, and the largest dataset scale. Second, we conduct the first systematic investigation on multiple representative learning-based PDE solvers, such as PINNs, FNO, DeepONet, and DiffusionPDE solvers, on multiphysics problems. Unfortunately, naively applying these existing solvers usually show very poor performance for solving multiphysics. Third, through extensive experiments and discussions, we report multiple insights and a bag of useful tricks for solving multiphysics with machine learning, motivating future directions in the study and simulation of complex, coupled physical systems.

Machine learning interatomic potentials (MLIPs) enable large-scale atomistic simulations but remain challenged in describing mixed-valence materials where charge ordering strongly influences thermodynamic stability. Here we investigate the role of electronic entropy in MLIP structural optimization of the battery cathode material NaFePO4. We show that conventional MLIPs fail to reproduce the correct stability of intermediate Na concentrations because structural optimization leads to incorrect Fe^{2+}/Fe^{3+} charge assignments, resulting in erroneous energy ordering and convex-hull predictions. Analysis of magnetic moments during structural optimization reveals that MLIPs are unable to capture electronic entropy associated with charge ordering. To address this limitation, we introduce an approach that embeds charge-state information directly into the MLIP representation by distinguishing between Fe^{2+} and Fe^{3+} environments during training. Retraining CHGNet, cPaiNN, and MACE with this representation enables accurate structural optimization, correct identification of charge ordering, and improved agreement with density functional theory convex hulls. Our results demonstrate that incorporating electronic entropy into MLIP representations is essential for modeling charge-disordered materials and provide a practical framework for extending MLIP simulations to mixed-valence transition-metal systems.

This study introduces amangkurat, an open-source Python library designed for the robust numerical simulation of relativistic scalar field dynamics governed by the nonlinear Klein-Gordon equation in (1+1)D spacetime. The software implements a hybrid computational strategy that couples Fourier pseudo-spectral spatial discretization with a symplectic Størmer-Verlet temporal integrator, ensuring both exponential spatial convergence for smooth solutions and long-term preservation of Hamiltonian structure. To optimize performance, the solver incorporates adaptive timestepping based on Courant-Friedrichs-Lewy (CFL) stability criteria and utilizes Just-In-Time (JIT) compilation for parallelized force computation. The library's capabilities are validated across four canonical physical regimes: dispersive linear wave propagation, static topological kink preservation in phi-fourth theory, integrable breather dynamics in the sine-Gordon model, and non-integrable kink-antikink collisions. Beyond standard numerical validation, this work establishes a multi-faceted analysis framework employing information-theoretic entropy metrics (Shannon, Rényi, and Tsallis), kernel density estimation, and phase space reconstruction to quantify the distinct phenomenological signatures of these regimes. Statistical hypothesis testing confirms that these scenarios represent statistically distinguishable dynamical populations. Benchmarks on standard workstation hardware demonstrate that the implementation achieves high computational efficiency, making it a viable platform for exploratory research and education in nonlinear field theory.

The most technologically consequential materials are often the rarest: they occupy narrow regions of chemical space, obey competing physical constraints, and appear only sparsely in existing databases. High-kappa dielectrics, high-Tc superconductors, and ferromagnetic insulators are to name a few. This scarcity fundamentally limits today's data-driven materials discovery, where machine-learning models excel at interpolation but struggle to generate genuinely new candidates. Here, we introduce DielecMIND, an artificial intelligence framework that reframes materials discovery as a reasoning-driven exploration instead of a database-screening problem. Using high-kappa dielectrics as a data-scarce and technologically stringent test case, DielecMIND combines large-language-model hypothesis generation for the first time with physics validated first-principles calculation to navigate chemical space beyond known compounds. Prior to our work, only 14 experimentally or computationally validated materials with kappa > 150 were known. Our framework discovers and validates 5 new such compounds, expanding this rare-materials class by a remarkable = 35% in a single study. Among them, we find that Ba2TiHfO6 exhibits a dielectric constant of 637, minimal loss at low optical frequencies, and stability up to 800 K. Beyond dielectrics, this work demonstrates a new paradigm for artificial-intelligence-guided discovery: one that generates a small number of physically grounded, experimentally plausible candidates yet measurably expands sparsely populated functional materials spaces. Thus, DielecMIND points toward a general strategy for discovering rare, high-impact functional materials where data scarcity has long constrained progress.

The NMR measurements performed on a single orthorhombic crystal of superconducting ferromagnet UCoGe (Y.Ihara et al, Phys. Rev. Lett. v.105, 206403 (2010)) demonstrate strongly anisotropic magnetic properties of this material. The presented calculations allow to establish the dependence of longitudinal spin-lattice relaxation rate from temperature and magnetic field. The value 1/T_1T in field perpendicular to spontaneous magnetisation directed along c-axis has maximum in vicinity of Curie temperature whereas it does not reveal similar behaviour in field parallel to the direction of spontaneous magnetisation. Also there was shown that the longitudinal spin-lattice relaxation rate is strongly field dependent when the field directed in b-crystallographic direction but field independent if magnetic field is oriented along a-axis.

We have investigated the effects of strain on two-dimensional square lattices and examined the methods for inducing pseudo-magnetic fields. In both the columnar and staggered pi-flux square lattices, we have found that strain only modulates Fermi velocities rather than inducing pseudo-magnetic fields. However, spatially non-uniform on-site potentials (anisotropic hoppings) can create pseudo-magnetic fields in columnar (staggered) pi-flux square lattices. On the other hand, we demonstrate that strain does induce pseudo-magnetic fields in staggered zero-flux square lattices. By breaking a quarter of the bonds, we clarify that a staggered zero-flux square lattice is topologically equivalent to a honeycomb lattice and displays pseudo-vector potentials and pseudo-Landau levels at the Dirac points.

Molecular dynamics (MD) provides insights into atomic-scale processes by integrating over time the equations that describe the motion of atoms under the action of interatomic forces. Machine learning models have substantially accelerated MD by providing inexpensive predictions of the forces, but they remain constrained to minuscule time integration steps, which are required by the fast time scale of atomic motion. In this work, we propose FlashMD, a method to predict the evolution of positions and momenta over strides that are between one and two orders of magnitude longer than typical MD time steps. We incorporate considerations on the mathematical and physical properties of Hamiltonian dynamics in the architecture, generalize the approach to allow the simulation of any thermodynamic ensemble, and carefully assess the possible failure modes of such a long-stride MD approach. We validate FlashMD's accuracy in reproducing equilibrium and time-dependent properties, using both system-specific and general-purpose models, extending the ability of MD simulation to reach the long time scales needed to model microscopic processes of high scientific and technological relevance.

The Markov entropy decomposition (MED) is a recently-proposed, cluster-based simulation method for finite temperature quantum systems with arbitrary geometry. In this paper, we detail numerical algorithms for performing the required steps of the MED, principally solving a minimization problem with a preconditioned Newton's algorithm, as well as how to extract global susceptibilities and thermal responses. We demonstrate the power of the method with the spin-1/2 XXZ model on the 2D square lattice, including the extraction of critical points and details of each phase. Although the method shares some qualitative similarities with exact-diagonalization, we show the MED is both more accurate and significantly more flexible.

Data-driven surrogate models are an alternative to numerical homogenization of heterogeneous materials. In this contribution, a supervised learning approach is presented for predicting effective Lamé parameters of hyperelastic composites from low-dimensional microstructural descriptors. The data set is based on previously published numerical homogenization results for ensembles of two-phase stochastic microstructures generated by planar Boolean models, covering variations of inclusion shape, phase contrast, and area fraction; see Brändel, Brands, Maike, Rheinbach, Schröder, Schwarz and Stoyan (2022). A neural network is trained on combinations of scalar and curve-valued statistical descriptors, including the area fraction, a derived scalar shape descriptor τ, the two-point correlation function S_2(r), and the lineal-path function ell(z). Additional data representing limiting cases of the parameter space are incorporated to stabilize training and improve extrapolation behavior. The surrogate is evaluated by leave-one-grain-type-out cross-validation in order to assess generalization to unseen grain geometries. Numerical results demonstrate that additional descriptors can reduce relative errors. A predictor trained with τ and S_2(r) provides a compact representation with good quantitative accuracy and regular dense response behavior. Adding the lineal-path function ell(z) further reduces the error at the available data points, indicating that it is a promising additional descriptor; however, dense post-training response evaluations show that improved pointwise accuracy does not automatically guarantee physically admissible behavior between sampled parameter values. This motivates future work on physically constrained surrogate models, loss formulations, bounded output parametrizations, and a more systematic representation of curve-valued geometric descriptors.

Stellarators are magnetic confinement devices under active development to deliver steady-state carbon-free fusion energy. Their design involves a high-dimensional, constrained optimization problem that requires expensive physics simulations and significant domain expertise. Recent advances in plasma physics and open-source tools have made stellarator optimization more accessible. However, broader community progress is currently bottlenecked by the lack of standardized optimization problems with strong baselines and datasets that enable data-driven approaches, particularly for quasi-isodynamic (QI) stellarator configurations, considered as a promising path to commercial fusion due to their inherent resilience to current-driven disruptions. Here, we release an open dataset of diverse QI-like stellarator plasma boundary shapes, paired with their ideal magnetohydrodynamic (MHD) equilibria and performance metrics. We generated this dataset by sampling a variety of QI fields and optimizing corresponding stellarator plasma boundaries. We introduce three optimization benchmarks of increasing complexity: (1) a single-objective geometric optimization problem, (2) a "simple-to-build" QI stellarator, and (3) a multi-objective ideal-MHD stable QI stellarator that investigates trade-offs between compactness and coil simplicity. For every benchmark, we provide reference code, evaluation scripts, and strong baselines based on classical optimization techniques. Finally, we show how learned models trained on our dataset can efficiently generate novel, feasible configurations without querying expensive physics oracles. By openly releasing the dataset along with benchmark problems and baselines, we aim to lower the entry barrier for optimization and machine learning researchers to engage in stellarator design and to accelerate cross-disciplinary progress toward bringing fusion energy to the grid.

Plasma modeling is central to the design of nuclear fusion reactors, yet simulating collisional plasma kinetics from first principles remains a formidable computational challenge: the Vlasov-Maxwell-Landau (VML) system describes six-dimensional phase-space transport under self-consistent electromagnetic fields together with the nonlinear, nonlocal Landau collision operator. A recent deterministic particle method for the full VML system estimates the velocity score function via the blob method, a kernel-based approximation with O(n^2) cost. In this work, we replace the blob score estimator with score-based transport modeling (SBTM), in which a neural network is trained on-the-fly via implicit score matching at O(n) cost. We prove that the approximated collision operator preserves momentum and kinetic energy, and dissipates an estimated entropy. We also characterize the unique global steady state of the VML system and its electrostatic reduction, providing the ground truth for numerical validation. On three canonical benchmarks -- Landau damping, two-stream instability, and Weibel instability -- SBTM is more accurate than the blob method, achieves correct long-time relaxation to Maxwellian equilibrium where the blob method fails, and delivers 50% faster runtime with 4times lower peak memory.

Integrated circuits are a cornerstone of modern information technology, and analog wave-based architectures could enable fast and efficient processing beyond conventional charge electronics. In magnonics, spin waves provide a highly tunable, compact and energy-efficient medium for on-chip microwave signal transport and processing. However, progress has been limited to isolated elements or short devices, severely limiting the overall functional complexity and scalability. Here we realize the key elements of universal magnonic circuitry, using a single-step direct laser writing process in yttrium iron garnet, and monolithically cascade them in multi-stage programmable devices and networks. Using magneto-optical Kerr effect microscopy, we show efficient spin-wave propagation and preserved phase coherence in waveguide structures for hundreds of wavelengths. In coupled waveguides, we observe complete and periodic power transfer over several coupling lengths, and in phase shifters we achieve arbitrary, tunable phase delays. By cascading these elements, we realize programmable splitters, frequency demultiplexers, and phase-controlled 2x2 routers, where output power and relative phase can be programmed on demand via external fields. Finally, we realize programmable magnonic interferometric meshes for on-chip radio-frequency signal routing, with up to six magnonic inputs and outputs and seven cascaded stages, without the need for intermediate amplification. These direct-write cascaded networks bridge a long-standing gap in magnonic scalability, offering a viable pathway toward integrated, large-scale architectures for both classical and quantum processing.

Simulations are the best approximation to experimental laboratories in astrophysics and cosmology. However, the complexity, richness, and large size of their outputs severely limit the interpretability of their predictions. We describe a new, unbiased, and machine learning based approach to obtaining useful scientific insights from a broad range of simulations. The method can be used on today's largest simulations and will be essential to solve the extreme data exploration and analysis challenges posed by the Exascale era. Furthermore, this concept is so flexible, that it will also enable explorative access to observed data. Our concept is based on applying nonlinear dimensionality reduction to learn compact representations of the data in a low-dimensional space. The simulation data is projected onto this space for interactive inspection, visual interpretation, sample selection, and local analysis. We present a prototype using a rotational invariant hyperspherical variational convolutional autoencoder, utilizing a power distribution in the latent space, and trained on galaxies from IllustrisTNG simulation. Thereby, we obtain a natural Hubble tuning fork like similarity space that can be visualized interactively on the surface of a sphere by exploiting the power of HiPS tilings in Aladin Lite.

Recent advances in scientific machine learning (SciML) have enabled neural operators (NOs) to serve as powerful surrogates for modeling the dynamic evolution of physical systems governed by partial differential equations (PDEs). While existing approaches focus primarily on learning simulations from the target PDE, they often overlook more fundamental physical principles underlying these equations. Inspired by how numerical solvers are compatible with simulations of different settings of PDEs, we propose a multiphysics training framework that jointly learns from both the original PDEs and their simplified basic forms. Our framework enhances data efficiency, reduces predictive errors, and improves out-of-distribution (OOD) generalization, particularly in scenarios involving shifts of physical parameters and synthetic-to-real transfer. Our method is architecture-agnostic and demonstrates consistent improvements in normalized root mean square error (nRMSE) across a wide range of 1D/2D/3D PDE problems. Through extensive experiments, we show that explicit incorporation of fundamental physics knowledge significantly strengthens the generalization ability of neural operators. We will release models and codes at https://sites.google.com/view/sciml-fundemental-pde.

Two-dimensional (2D) magnetism in atomically thin van der Waals (vdW) monolayers and heterostructures has attracted significant attention due to its promising potential for next-generation spintronic and quantum technologies. A key factor in stabilizing long-range magnetic order in these systems is magnetic anisotropy, which plays a crucial role in overcoming the limitations imposed by the Mermin-Wagner theorem. This review provides a comprehensive theoretical and experimental overview of the importance of magnetic anisotropy in enabling intrinsic 2D magnetism and shaping the electronic, magnetic, and topological properties of 2D vdW materials. We begin by summarizing the fundamental mechanisms that determine magnetic anisotropy, emphasizing the contributions from strong ligand spin-orbit coupling of ligand atoms and unquenched orbital magnetic moments. We then examine a range of material engineering approaches, including alloying, doping, electrostatic gating, strain, and pressure, that have been employed to effectively tune magnetic anisotropy in these materials. Finally, we discuss open challenges and promising future directions in this rapidly advancing field. By presenting a broad perspective on the role of magnetic anisotropy in 2D magnetism, this review aims to stimulate ongoing efforts and new ideas toward the realization of robust, room-temperature applications based on 2D vdW magnetic materials and their heterostructures.

Primordial Magnetic Fields (PMFs) -- magnetic fields originating in the early Universe and permeating the cosmological scales today -- can explain the observed microGauss-level magnetisation of galaxies and their clusters. In light of current and upcoming all-sky radio surveys, PMFs have drawn attention not only as major candidates for explaining the large-scale magnetisation of the Universe, but also as potential probes of early-Universe physics. In this paper, using cosmological simulations coupled with light-cone analysis, we study for the first time the imprints of the PMF structure on the mean rotation measure (RM) originating in the intergalactic medium (IGM), langle RM_{IGM}rangle. We introduce a new method for producing full-sky RM_{IGM} distributions and analyse the autocorrelation of RM_{IGM} on small and large angular scales; we find that PMF structures indeed show distinct signatures. The large-scale uniform model (characterised by an initially unlimited coherence scale) leads to correlations up to 90 degrees, while correlations for small-scale stochastic PMF models drop by factor of 100 at 0.17, 0.13 and 0.11 degrees angular scales, corresponding to 5.24, 4.03 and 3.52 Mpc scales (at z=2 redshift) for magnetic fields with comoving 3.49, 1.81, 1.00 Mpc/h coherence scales, respectively; the correlation amplitude of the PMF model with comoving sim 19 Mpc/h coherence scale drops only by factor of 10 at 1 degree (30.6 Mpc). These results suggests that improvements in the modelling of Galactic RM will be necessary to investigate the signature of large-scale correlated PMFs. A comparison of langle RM_{IGM}rangle redshift dependence obtained from our simulations with that from the LOFAR Two-metre Sky Survey shows agreement with our previous upper limits' estimates on the PMF strength derived from RM-rms analysis.

Despite their ubiquity throughout science and engineering, only a handful of partial differential equations (PDEs) have analytical, or closed-form solutions. This motivates a vast amount of classical work on numerical simulation of PDEs and more recently, a whirlwind of research into data-driven techniques leveraging machine learning (ML). A recent line of work indicates that a hybrid of classical numerical techniques and machine learning can offer significant improvements over either approach alone. In this work, we show that the choice of the numerical scheme is crucial when incorporating physics-based priors. We build upon Fourier-based spectral methods, which are known to be more efficient than other numerical schemes for simulating PDEs with smooth and periodic solutions. Specifically, we develop ML-augmented spectral solvers for three common PDEs of fluid dynamics. Our models are more accurate (2-4x) than standard spectral solvers at the same resolution but have longer overall runtimes (~2x), due to the additional runtime cost of the neural network component. We also demonstrate a handful of key design principles for combining machine learning and numerical methods for solving PDEs.

We introduce a new family of physics-inspired generative models termed PFGM++ that unifies diffusion models and Poisson Flow Generative Models (PFGM). These models realize generative trajectories for N dimensional data by embedding paths in N{+}D dimensional space while still controlling the progression with a simple scalar norm of the D additional variables. The new models reduce to PFGM when D{=}1 and to diffusion models when D{to}infty. The flexibility of choosing D allows us to trade off robustness against rigidity as increasing D results in more concentrated coupling between the data and the additional variable norms. We dispense with the biased large batch field targets used in PFGM and instead provide an unbiased perturbation-based objective similar to diffusion models. To explore different choices of D, we provide a direct alignment method for transferring well-tuned hyperparameters from diffusion models (D{to} infty) to any finite D values. Our experiments show that models with finite D can be superior to previous state-of-the-art diffusion models on CIFAR-10/FFHQ 64{times}64 datasets, with FID scores of 1.91/2.43 when D{=}2048/128. In class-conditional setting, D{=}2048 yields current state-of-the-art FID of 1.74 on CIFAR-10. In addition, we demonstrate that models with smaller D exhibit improved robustness against modeling errors. Code is available at https://github.com/Newbeeer/pfgmpp

Machine learning based surrogate models offer researchers powerful tools for accelerating simulation-based workflows. However, as standard datasets in this space often cover small classes of physical behavior, it can be difficult to evaluate the efficacy of new approaches. To address this gap, we introduce the Well: a large-scale collection of datasets containing numerical simulations of a wide variety of spatiotemporal physical systems. The Well draws from domain experts and numerical software developers to provide 15TB of data across 16 datasets covering diverse domains such as biological systems, fluid dynamics, acoustic scattering, as well as magneto-hydrodynamic simulations of extra-galactic fluids or supernova explosions. These datasets can be used individually or as part of a broader benchmark suite. To facilitate usage of the Well, we provide a unified PyTorch interface for training and evaluating models. We demonstrate the function of this library by introducing example baselines that highlight the new challenges posed by the complex dynamics of the Well. The code and data is available at https://github.com/PolymathicAI/the_well.

This paper puts forward an integrated microstructure design methodology that replaces the common existing design approaches: 1) reconstruction of microstructures, 2) analyzing and quantifying material properties, and 3) inverse design of materials using deep-learned generative and surrogate models. The long-standing issue of microstructure reconstruction is well addressed in this study using a new class of state-of-the-art generative model, the diffusion-based generative model (DGM). Moreover, the conditional formulation of DGM for guidance to the embedded desired material properties with a transformer-based attention mechanism enables the inverse design of multifunctional composites. A convolutional neural network (CNN)-based surrogate model is utilized to analyze the nonlinear material behavior to facilitate the prediction of material properties for building microstructure-property linkages. Combined, these generative and surrogate models enable large data processing and database construction that is often not affordable with resource-intensive finite element method (FEM)-based direct numerical simulation (DNS) and iterative reconstruction methods. An example case is presented to demonstrate the effectiveness of the proposed approach, which is designing mechanoluminescence (ML) particulate composites made of europium and dysprosium ions. The results show that the inversely-designed multiple ML microstructure candidates with the proposed generative and surrogate models meet the multiple design requirements (e.g., volume fraction, elastic constant, and light sensitivity). The evaluation of the generated samples' quality and the surrogate models' performance using appropriate metrics are also included. This assessment demonstrates that the proposed integrated methodology offers an end-to-end solution for practical material design applications.

We study the scaling properties of avalanche activity in the two-dimensional Abelian sandpile model. Instead of the conventional avalanche size distribution, we analyze the site activity distribution, which measures how often a site participates in avalanches when grains are added across the lattice. Using numerical simulations for system sizes up to \(L = 160\), averaged over \(10^4\) configurations, we determine the probability distribution \(P(A, L)\) of site activities. The results show that \(P(A, L)\) follows a finite-size scaling form \[ P(A, L) \sim L^{-2} F\Big(A{L^2}\Big). \] For small values \(A \ll L^2\) the scaling function behaves as \[ F(u) \sim u^{-1/2}, \quad corresponding to \quad P(A) \sim 1{L}, \] while for large activities \(A \sim O(L^2)\) the distribution decays as \[ F(u) \sim \exp\big(-c_3 u - c_4 u^2\big). \] The crossover between these two regimes occurs at \[ A^* \sim 0.1 \, L^2, \] marking the threshold between typical and highly excitable sites. This characterization of local avalanche activity provides complementary information to the usual avalanche size statistics, highlighting how local regions serve as frequent conduits for critical dynamics. These results may help connect sandpile models to real-world self-organized critical systems where only partial local activity can be observed.

Physical systems commonly exhibit spatially varying complexity, presenting a significant challenge for neural PDE solvers. While Graph Neural Networks can handle the irregular meshes required for complex geometries and boundary conditions, they still apply uniform computational effort across all nodes regardless of the underlying physics complexity. This leads to inefficient resource allocation where computationally simple regions receive the same treatment as complex phenomena. We address this challenge by introducing Adaptive Mesh Quantization: spatially adaptive quantization across mesh node, edge, and cluster features, dynamically adjusting the bit-width used by a quantized model. We propose an adaptive bit-width allocation strategy driven by a lightweight auxiliary model that identifies high-loss regions in the input mesh. This enables dynamic resource distribution in the main model, where regions of higher difficulty are allocated increased bit-width, optimizing computational resource utilization. We demonstrate our framework's effectiveness by integrating it with two state-of-the-art models, MP-PDE and GraphViT, to evaluate performance across multiple tasks: 2D Darcy flow, large-scale unsteady fluid dynamics in 2D, steady-state Navier-Stokes simulations in 3D, and a 2D hyper-elasticity problem. Our framework demonstrates consistent Pareto improvements over uniformly quantized baselines, yielding up to 50% improvements in performance at the same cost.

We present FreeBird, an extensible Julia-based platform for computational studies of phase equilibria at generic interfaces. The package supports a range of system configurations, from atomistic solid surfaces to coarse-grained lattice-gas models, with energies evaluated using classical interatomic potentials or lattice Hamiltonians. Both atomistic and lattice systems accommodate single- or multi-component mixtures with flexibly definable surface and lattice geometries. Implemented sampling algorithms include nested sampling, Wang-Landau sampling, Metropolis Monte Carlo, and, for tractable lattice systems, exact enumeration. Leveraging Julia's type hierarchies and multiple dispatch, FreeBird provides a modular interface that allows seamless integration of system definitions, energy evaluators, and sampling schemes. Designed for flexibility, extensibility, and performance, FreeBird offers a versatile framework for exploring the thermodynamics of interfacial phenomena.

We conducted a high-throughput search for topological magnetic materials on 522 new, experimentally reported commensurate magnetic structures from MAGNDATA, doubling the number of available materials on the Topological Magnetic Materials database. This brings up to date the previous studies which had become incomplete due to the discovery of new materials. For each material, we performed first-principle electronic calculations and diagnosed the topology as a function of the Hubbard U parameter. Our high-throughput calculation led us to the prediction of 250 experimentally relevant topologically non-trivial materials, which represent 47.89% of the newly analyzed materials. We present five remarkable examples of these materials, each showcasing a different topological phase: Mn{}_2AlB{}_2 (BCSID 1.508), which exhibits a nodal line semimetal to topological insulator transition as a function of SOC, CaMnSi (BCSID 0.599), a narrow gap axion insulator, UAsS (BCSID 0.594) a 5f-orbital Weyl semimetal, CsMnF{}_4 (BCSID 0.327), a material presenting a new type of quasi-symmetry protected closed nodal surface and FeCr{}_2S{}_4 (BCSID 0.613), a symmetry-enforced semimetal with double Weyls and spin-polarised surface states.

We perform a Monte Carlo analysis of the Ising model on many three-dimensional lattices. By means of finite-size scaling we obtain the critical points and determine the scaling dimensions. As expected, the critical exponents agree with the three-dimensional Ising universality class for all models. The irrelevant field, as revealed by the correction-to-scaling amplitudes, appears to be relatively large. Combining the Monte Carlo results for the hydrogen peroxide lattice with those for five other three-dimensional lattices, we obtain a set of data covering a wide range of the irrelevant temperature field. This is helpful in the determination of the parameters describing the corrections to scaling. As a consequence, new results are obtained for the universal parameters describing Ising criticality in three dimensions, with reduced error margins in comparison with earlier Monte Carlo analyses. The critical exponents describing the thermodynamic singularities are determined by the temperature renormalization exponent y_t = 1.58693 (9) and the magnetic renormalization exponent y_h = 2.48178 (5). The corrections to scaling are governed by the irrelevant exponent y_1 = -0.821 (5).

Normalizing flows can transform a simple prior probability distribution into a more complex target distribution. Here, we evaluate the ability and efficiency of generative machine learning methods to sample the Boltzmann distribution of an atomistic model for glass-forming liquids. This is a notoriously difficult task, as it amounts to ergodically exploring the complex free energy landscape of a disordered and frustrated many-body system. We optimize a normalizing flow model to successfully transform high-temperature configurations of a dense liquid into low-temperature ones, near the glass transition. We perform a detailed comparative analysis with established enhanced sampling techniques developed in the physics literature to assess and rank the performance of normalizing flows against state-of-the-art algorithms. We demonstrate that machine learning methods are very promising, showing a large speedup over conventional molecular dynamics. Normalizing flows show performances comparable to parallel tempering and population annealing, while still falling far behind the swap Monte Carlo algorithm. Our study highlights the potential of generative machine learning models in scientific computing for complex systems, but also points to some of its current limitations and the need for further improvement.

The Numerical Flow Iteration (NuFI) method has recently been proposed as a memory-slim solution method for the Vlasov--Poisson system. It stores the temporal evolution of the electric field, instead of the distribution functions, and reconstructs the solution in each time step by following the characteristics backwards in time and reconstructing the solution from the initial distribution. NuFI has been shown to be more accurate than other state-of-the-art Vlasov solvers given the same amount of degrees of freedom as well as interpolation order, essentially making NuFI a high-fidelity but low-memory cost scheme. In this paper, we build on the Hamiltonian structure of the full Vlasov--Maxwell system to extend NuFI to handle electro-magnetic kinetic plasma dynamics. We show that the advanced structure-preserving properties of NuFI are preserved when extending to the electro-magnetic case.

Machine-learned interatomic potentials are revolutionising atomistic materials simulations by providing accurate and scalable predictions within the scope covered by the training data. However, generation of an accurate and robust training data set remains a challenge, often requiring thousands of first-principles calculations to achieve high accuracy. Foundation models have started to emerge with the ambition to create universally applicable potentials across a wide range of materials. While foundation models can be robust and transferable, they do not yet achieve the accuracy required to predict reaction barriers, phase transitions, and material stability. This work demonstrates that foundation model potentials can reach chemical accuracy when fine-tuned using transfer learning with partially frozen weights and biases. For two challenging datasets on reactive chemistry at surfaces and stability and elastic properties of tertiary alloys, we show that frozen transfer learning with 10-20% of the data (hundreds of datapoints) achieves similar accuracies to models trained from scratch (on thousands of datapoints). Moreover, we show that an equally accurate, but significantly more efficient surrogate model can be built using the transfer learned potential as the ground truth. In combination, we present a simulation workflow for machine learning potentials that improves data efficiency and computational efficiency.

We present a generative framework for inverse design of five-layer transmissive Huygens' metasurfaces (HMSs), addressing a longstanding challenge in achieving full-phase, high-efficiency unit cell designs with minimal full-wave simulations. The key to achieving this is our reliance on the field-based semianalytical (SA) scheme developed in Part I of this paper, which allows rapid and highly effective synthesis of such multilayer composites, however with limited accuracy. To overcome the prohibitive data demands of traditional pipelines, we employ Mamba, a selective state space model well suited for long-range sequence modeling as the backbone of our learning framework. A bidirectional Mamba (Bi-Mamba) forward surrogate is first trained on SA-generated data and subsequently fine-tuned with full-wave CST samples. An ablation over a 1080-sample CST pool shows that as few as 270 full-wave calibration samples suffice to reach near-CST-level agreement at a fraction of the simulation cost. An autoregressive Mamba inverse generator is subsequently trained on surrogate-augmented data, treating unit-cell synthesis as a sequential generation task. The resulting one-to-many generative model produces diverse unit cell geometries conditioned on target scattering responses. It achieves CST-validated designs with field transmission magnitude 0.9 across the full 0-2π phase range at 20 GHz. Moreover, a CST-calibrated surrogate trained to accurately predict frequency responses (18-22 GHz) enables functional post-selection of inverse generated designs. Together, the hybrid SA-generative methodology in this two-part compilation establishes a scalable and data-efficient solution for multilayer HMS synthesis, with natural extensions toward broadband, oblique-incidence, and higher-dimensional electromagnetic inverse-design problems.

This study examines the performance of finite spin quantum batteries (QBs) using Heisenberg spin models with Dzyaloshinsky-Moriya (DM) and Kaplan--Shekhtman--Entin-Wohlman--Aharony (KSEA) interactions. The QBs are modeled as interacting quantum spins in local inhomogeneous magnetic fields, inducing variable Zeeman splitting. We derive analytical expressions for the maximal extractable work, ergotropy and the capacity of QBs, as recently examined by Yang et al. [Phys. Rev. Lett. 131, 030402 (2023)]. These quantities are analytically linked through certain quantum correlations, as posited in the aforementioned study. Different Heisenberg spin chain models exhibit distinct behaviors under varying conditions, emphasizing the importance of model selection for optimizing QB performance. In antiferromagnetic (AFM) systems, maximum ergotropy occurs with a Zeeman splitting field applied to either spin, while ferromagnetic (FM) systems benefit from a uniform Zeeman field. Temperature significantly impacts QB performance, with ergotropy in the AFM case being generally more robust against temperature increases compared to the FM case. Incorporating DM and KSEA couplings can significantly enhance the capacity and ergotropy extraction of QBs. However, there exists a threshold beyond which additional increases in these interactions cause a sharp decline in capacity and ergotropy. This behavior is influenced by temperature and quantum coherence, which signal the occurrence of a sudden phase transition. The resource theory of quantum coherence proposed by Baumgratz et al. [Phys. Rev. Lett. 113, 140401 (2014)] plays a crucial role in enhancing ergotropy and capacity. However, ergotropy is limited by both the system's capacity and the amount of coherence. These findings support the theoretical framework of spin-based QBs and may benefit future research on quantum energy storage devices.

Nuclear fusion plays a pivotal role in the quest for reliable and sustainable energy production. A major roadblock to viable fusion power is understanding plasma turbulence, which significantly impairs plasma confinement, and is vital for next-generation reactor design. Plasma turbulence is governed by the nonlinear gyrokinetic equation, which evolves a 5D distribution function over time. Due to its high computational cost, reduced-order models are often employed in practice to approximate turbulent transport of energy. However, they omit nonlinear effects unique to the full 5D dynamics. To tackle this, we introduce GyroSwin, the first scalable 5D neural surrogate that can model 5D nonlinear gyrokinetic simulations, thereby capturing the physical phenomena neglected by reduced models, while providing accurate estimates of turbulent heat transport.GyroSwin (i) extends hierarchical Vision Transformers to 5D, (ii) introduces cross-attention and integration modules for latent 3Dleftrightarrow5D interactions between electrostatic potential fields and the distribution function, and (iii) performs channelwise mode separation inspired by nonlinear physics. We demonstrate that GyroSwin outperforms widely used reduced numerics on heat flux prediction, captures the turbulent energy cascade, and reduces the cost of fully resolved nonlinear gyrokinetics by three orders of magnitude while remaining physically verifiable. GyroSwin shows promising scaling laws, tested up to one billion parameters, paving the way for scalable neural surrogates for gyrokinetic simulations of plasma turbulence.

MLMOD is a software package for incorporating machine learning approaches and models into simulations of microscale mechanics and molecular dynamics in LAMMPS. Recent machine learning approaches provide promising data-driven approaches for learning representations for system behaviors from experimental data and high fidelity simulations. The package faciliates learning and using data-driven models for (i) dynamics of the system at larger spatial-temporal scales (ii) interactions between system components, (iii) features yielding coarser degrees of freedom, and (iv) features for new quantities of interest characterizing system behaviors. MLMOD provides hooks in LAMMPS for (i) modeling dynamics and time-step integration, (ii) modeling interactions, and (iii) computing quantities of interest characterizing system states. The package allows for use of machine learning methods with general model classes including Neural Networks, Gaussian Process Regression, Kernel Models, and other approaches. Here we discuss our prototype C++/Python package, aims, and example usage. The package is integrated currently with the mesocale and molecular dynamics simulation package LAMMPS and PyTorch. For related papers, examples, updates, and additional information see https://github.com/atzberg/mlmod and http://atzberger.org/.

In VLSI physical design, many algorithms require the solution of difficult combinatorial optimization problems such as max/min-cut, max-flow problems etc. Due to the vast number of elements typically found in this problem domain, these problems are computationally intractable leading to the use of approximate solutions. In this work, we explore the Ising spin glass model as a solution methodology for hard combinatorial optimization problems using the general purpose GPU (GPGPU). The Ising model is a mathematical model of ferromagnetism in statistical mechanics. Ising computing finds a minimum energy state for the Ising model which essentially corresponds to the expected optimal solution of the original problem. Many combinatorial optimization problems can be mapped into the Ising model. In our work, we focus on the max-cut problem as it is relevant to many VLSI physical design problems. Our method is inspired by the observation that Ising annealing process is very amenable to fine-grain massive parallel GPU computing. We will illustrate how the natural randomness of GPU thread scheduling can be exploited during the annealing process to create random update patterns and allow better GPU resource utilization. Furthermore, the proposed GPU-based Ising computing can handle any general Ising graph with arbitrary connections, which was shown to be difficult for existing FPGA and other hardware based implementation methods. Numerical results show that the proposed GPU Ising max-cut solver can deliver more than 2000X speedup over the CPU version of the algorithm on some large examples, which shows huge performance improvement for addressing many hard optimization algorithms for practical VLSI physical design.

This work is dedicated to the review and perspective of the new direction that we call "Neuropunk revolution" resembling the cultural phenomenon of cyberpunk. This new phenomenon has its foundations in advances in neuromorphic technologies including memristive and bio-plausible simulations, BCI, and neurointerfaces as well as unconventional approaches to AI and computing in general. We present the review of the current state-of-the-art and our vision of near future development of scientific approaches and future technologies. We call the "Neuropunk revolution" the set of trends that in our view provide the necessary background for the new generation of approaches technologies to integrate the cybernetic objects with biological tissues in close loop system as well as robotic systems inspired by the biological processes again integrated with biological objects. We see bio-plausible simulations implemented by digital computers or spiking networks memristive hardware as promising bridge or middleware between digital and (neuro)biological domains.

The Sun's outer atmosphere, the corona, is maintained at mega-Kelvin temperatures and fills the heliosphere with a supersonic outflowing wind. The dissipation of magnetic waves and direct electric currents are likely to be the most significant processes for heating the corona, but a lively debate exists on their relative roles. Here, we suggest that the two are often intrinsically linked, since magnetic waves may trigger current dissipation, and impulsive reconnection can launch magnetic waves. We present a study of the first of these processes by using a 2D physics-based numerical simulation using the Adaptive Mesh Refined (AMR) Versatile Advection Code (VAC). Magnetic waves such as fast magnetoacoustic waves are often observed to propagate in the large-scale corona and interact with local magnetic structures. The present numerical simulations show how the propagation of magnetic disturbances towards a null point or separator can lead to the accumulation of the electric currents. Lorentz forces can laterally push and vertically stretch the magnetic fields, forming a current sheet with a strong magnetic-field gradient. The magnetic field lines then break and reconnect, and so contribute towards coronal heating. Numerical results are presented that support these ideas and support the concept of a symbiosis between waves and reconnection in heating the solar corona.

We study uncertainty quantification for partial differential equations subject to domain uncertainty. We parameterize the random domain using the model recently considered by Chernov and Le (2024) as well as Harbrecht, Schmidlin, and Schwab (2024) in which the input random field is assumed to belong to a Gevrey smoothness class. This approach has the advantage of being substantially more general than models which assume a particular parametric representation of the input random field such as a Karhunen-Loeve series expansion. We consider both the Poisson equation as well as the heat equation and design randomly shifted lattice quasi-Monte Carlo (QMC) cubature rules for the computation of the expected solution under domain uncertainty. We show that these QMC rules exhibit dimension-independent, essentially linear cubature convergence rates in this framework. In addition, we complete the error analysis by taking into account the approximation errors incurred by dimension truncation of the random input field and finite element discretization. Numerical experiments are presented to confirm the theoretical rates.

Molecular Dynamics (MD) is a powerful computational microscope for probing protein functions. However, the need for fine-grained integration and the long timescales of biomolecular events make MD computationally expensive. To address this, several generative models have been proposed to generate surrogate trajectories at lower cost. Yet, these models typically learn a fixed-lag transition density, causing the training signal to be dominated by frequent but uninformative transitions. We introduce a new class of generative models, MSM Emulators, which instead learn to sample transitions across discrete states defined by an underlying Markov State Model (MSM). We instantiate this class with Markov Space Flow Matching (MarS-FM), whose sampling offers more than two orders of magnitude speedup compared to implicit- or explicit-solvent MD simulations. We benchmark Mars-FM ability to reproduce MD statistics through structural observables such as RMSD, radius of gyration, and secondary structure content. Our evaluation spans protein domains (up to 500 residues) with significant chemical and structural diversity, including unfolding events, and enforces strict sequence dissimilarity between training and test sets to assess generalization. Across all metrics, MarS-FM outperforms existing methods, often by a substantial margin.

Foundation models have transformed machine learning for language and vision, but achieving comparable impact in physical simulation remains a challenge. Data heterogeneity and unstable long-term dynamics inhibit learning from sufficiently diverse dynamics, while varying resolutions and dimensionalities challenge efficient training on modern hardware. Through empirical and theoretical analysis, we incorporate new approaches to mitigate these obstacles, including a harmonic-analysis-based stabilization method, load-balanced distributed 2D and 3D training strategies, and compute-adaptive tokenization. Using these tools, we develop Walrus, a transformer-based foundation model developed primarily for fluid-like continuum dynamics. Walrus is pretrained on nineteen diverse scenarios spanning astrophysics, geoscience, rheology, plasma physics, acoustics, and classical fluids. Experiments show that Walrus outperforms prior foundation models on both short and long term prediction horizons on downstream tasks and across the breadth of pretraining data, while ablation studies confirm the value of our contributions to forecast stability, training throughput, and transfer performance over conventional approaches. Code and weights are released for community use.

This paper will discuss the microphysical simulation of interactions in liquid xenon, the active detector medium in many leading rare-event searches for new physics, and describe experimental observables useful for understanding detector performance. The scintillation and ionization yield distributions for signal and background will be presented using the Noble Element Simulation Technique (NEST), which is a toolkit based on experimental data and simple, empirical formulae, which mimic previous microphysics modeling, but are guided by data. The NEST models for light and charge production as a function of the particle type, energy, and electric field will be reviewed, as well as models for energy resolution and final pulse areas. NEST will be compared to other models or sets of models, and vetted against real data, with several specific examples pulled from XENON, ZEPLIN, LUX, LZ, PandaX, and table-top experiments used for calibrations.

Partial Differential Equations are precise in modelling the physical, biological and graphical phenomena. However, the numerical methods suffer from the curse of dimensionality, high computation costs and domain-specific discretization. We aim to explore pros and cons of different PDE solvers, and apply them to specific scientific simulation problems, including forwarding solution, inverse problems and equations discovery. In particular, we extend the recent CNF (NeurIPS 2023) framework solver to multi-dependent-variable and non-linear settings, together with down-stream applications. The outcomes include implementation of selected methods, self-tuning techniques, evaluation on benchmark problems and a comprehensive survey of neural PDE solvers and scientific simulation applications.

In this paper, we extend mean-field Langevin dynamics to minimax optimization over probability distributions for the first time with symmetric and provably convergent updates. We propose mean-field Langevin averaged gradient (MFL-AG), a single-loop algorithm that implements gradient descent ascent in the distribution spaces with a novel weighted averaging, and establish average-iterate convergence to the mixed Nash equilibrium. We also study both time and particle discretization regimes and prove a new uniform-in-time propagation of chaos result which accounts for the dependency of the particle interactions on all previous distributions. Furthermore, we propose mean-field Langevin anchored best response (MFL-ABR), a symmetric double-loop algorithm based on best response dynamics with linear last-iterate convergence. Finally, we study applications to zero-sum Markov games and conduct simulations demonstrating long-term optimality.

Accurate and fast prediction of materials properties is central to the digital transformation of materials design. However, the vast design space and diverse operating conditions pose significant challenges for accurately modeling arbitrary material candidates and forecasting their properties. We present MatterSim, a deep learning model actively learned from large-scale first-principles computations, for efficient atomistic simulations at first-principles level and accurate prediction of broad material properties across the periodic table, spanning temperatures from 0 to 5000 K and pressures up to 1000 GPa. Out-of-the-box, the model serves as a machine learning force field, and shows remarkable capabilities not only in predicting ground-state material structures and energetics, but also in simulating their behavior under realistic temperatures and pressures, signifying an up to ten-fold enhancement in precision compared to the prior best-in-class. This enables MatterSim to compute materials' lattice dynamics, mechanical and thermodynamic properties, and beyond, to an accuracy comparable with first-principles methods. Specifically, MatterSim predicts Gibbs free energies for a wide range of inorganic solids with near-first-principles accuracy and achieves a 15 meV/atom resolution for temperatures up to 1000K compared with experiments. This opens an opportunity to predict experimental phase diagrams of materials at minimal computational cost. Moreover, MatterSim also serves as a platform for continuous learning and customization by integrating domain-specific data. The model can be fine-tuned for atomistic simulations at a desired level of theory or for direct structure-to-property predictions, achieving high data efficiency with a reduction in data requirements by up to 97%.

Neuromorphic spintronics combines two advanced fields in technology, neuromorphic computing and spintronics, to create brain-inspired, efficient computing systems that leverage the unique properties of the electron's spin. In this book chapter, we first introduce both fields - neuromorphic computing and spintronics and then make a case for neuromorphic spintronics. We discuss concrete examples of neuromorphic spintronics, including computing based on fluctuations, artificial neural networks, and reservoir computing, highlighting their potential to revolutionize computational efficiency and functionality.

Machine learning-based modeling of physical systems has experienced increased interest in recent years. Despite some impressive progress, there is still a lack of benchmarks for Scientific ML that are easy to use but still challenging and representative of a wide range of problems. We introduce PDEBench, a benchmark suite of time-dependent simulation tasks based on Partial Differential Equations (PDEs). PDEBench comprises both code and data to benchmark the performance of novel machine learning models against both classical numerical simulations and machine learning baselines. Our proposed set of benchmark problems contribute the following unique features: (1) A much wider range of PDEs compared to existing benchmarks, ranging from relatively common examples to more realistic and difficult problems; (2) much larger ready-to-use datasets compared to prior work, comprising multiple simulation runs across a larger number of initial and boundary conditions and PDE parameters; (3) more extensible source codes with user-friendly APIs for data generation and baseline results with popular machine learning models (FNO, U-Net, PINN, Gradient-Based Inverse Method). PDEBench allows researchers to extend the benchmark freely for their own purposes using a standardized API and to compare the performance of new models to existing baseline methods. We also propose new evaluation metrics with the aim to provide a more holistic understanding of learning methods in the context of Scientific ML. With those metrics we identify tasks which are challenging for recent ML methods and propose these tasks as future challenges for the community. The code is available at https://github.com/pdebench/PDEBench.

Sampling from discrete distributions with multiple modes and energy barriers is fundamental to machine learning and computational physics. Recent discrete neural samplers like MDNS suffer from mode collapse and fail to sample high-energy barrier regions between modes, which is critical for free energy estimation and understanding phase transitions. We propose Metadynamics Discrete Neural Sampler (MetaDNS), a general framework integrating well-tempered metadynamics into discrete diffusion or autoregressive samplers. By maintaining an adaptive, history-dependent bias potential along selected low-dimensional coordinates, MetaDNS forces exploration of previously inaccessible regions, enabling free energy reconstruction infeasible with standard neural samplers due to a lack of high-energy samples. On challenging low-temperature benchmarks including Ising, Potts, and the copper-gold binary alloy, MetaDNS reproduces the thermodynamic distribution. Compared to MCMC-based metadynamics, MetaDNS also achieves comparable exploration requiring fewer bias deposition steps.

We present dla-ideal-solver, a high-performance framework for simulating two-dimensional Diffusion-Limited Aggregation (DLA) using Numba-accelerated Python. By leveraging just-in-time (JIT) compilation, we achieve computational throughput comparable to legacy static implementations while retaining high-level flexibility. We investigate the Laplacian growth instability across varying injection geometries and walker concentrations. Our analysis confirms the robustness of the standard fractal dimension D_f approx 1.71 for dilute regimes, consistent with the Witten-Sander universality class. However, we report a distinct crossover to Eden-like compact growth (D_f approx 1.87) in high-density environments, attributed to the saturation of the screening length. Beyond standard mass-radius scaling, we employ generalized Rényi dimensions and lacunarity metrics to quantify the monofractal character and spatial heterogeneity of the aggregates. This work establishes a reproducible, open-source testbed for exploring phase transitions in non-equilibrium statistical mechanics.

We introduce CMPhysBench, designed to assess the proficiency of Large Language Models (LLMs) in Condensed Matter Physics, as a novel Benchmark. CMPhysBench is composed of more than 520 graduate-level meticulously curated questions covering both representative subfields and foundational theoretical frameworks of condensed matter physics, such as magnetism, superconductivity, strongly correlated systems, etc. To ensure a deep understanding of the problem-solving process,we focus exclusively on calculation problems, requiring LLMs to independently generate comprehensive solutions. Meanwhile, leveraging tree-based representations of expressions, we introduce the Scalable Expression Edit Distance (SEED) score, which provides fine-grained (non-binary) partial credit and yields a more accurate assessment of similarity between prediction and ground-truth. Our results show that even the best models, Grok-4, reach only 36 average SEED score and 28% accuracy on CMPhysBench, underscoring a significant capability gap, especially for this practical and frontier domain relative to traditional physics. The code anddataset are publicly available at https://github.com/CMPhysBench/CMPhysBench.

We propose a machine learning method to model molecular tensorial quantities, namely the magnetic anisotropy tensor, based on the Gaussian-moment neural-network approach. We demonstrate that the proposed methodology can achieve an accuracy of 0.3--0.4 cm^{-1} and has excellent generalization capability for out-of-sample configurations. Moreover, in combination with machine-learned interatomic potential energies based on Gaussian moments, our approach can be applied to study the dynamic behavior of magnetic anisotropy tensors and provide a unique insight into spin-phonon relaxation.

Learning physical simulations has been an essential and central aspect of many recent research efforts in machine learning, particularly for Navier-Stokes-based fluid mechanics. Classic numerical solvers have traditionally been computationally expensive and challenging to use in inverse problems, whereas Neural solvers aim to address both concerns through machine learning. We propose a general formulation for continuous convolutions using separable basis functions as a superset of existing methods and evaluate a large set of basis functions in the context of (a) a compressible 1D SPH simulation, (b) a weakly compressible 2D SPH simulation, and (c) an incompressible 2D SPH Simulation. We demonstrate that even and odd symmetries included in the basis functions are key aspects of stability and accuracy. Our broad evaluation shows that Fourier-based continuous convolutions outperform all other architectures regarding accuracy and generalization. Finally, using these Fourier-based networks, we show that prior inductive biases, such as window functions, are no longer necessary. An implementation of our approach, as well as complete datasets and solver implementations, is available at https://github.com/tum-pbs/SFBC.

Machine learning interatomic potentials (MLIPs) have become increasingly effective at approximating quantum mechanical calculations at a fraction of the computational cost. However, lower errors on held out test sets do not always translate to improved results on downstream physical property prediction tasks. In this paper, we propose testing MLIPs on their practical ability to conserve energy during molecular dynamic simulations. If passed, improved correlations are found between test errors and their performance on physical property prediction tasks. We identify choices which may lead to models failing this test, and use these observations to improve upon highly-expressive models. The resulting model, eSEN, provides state-of-the-art results on a range of physical property prediction tasks, including materials stability prediction, thermal conductivity prediction, and phonon calculations.

How embedded, actively accreting low-mass protostars accrete their mass is still greatly debated. Observations are now piecing together the puzzle of embedded protostellar accretion, in particular with new facilities in the near-infrared. However, high-resolution theoretical models are still lacking, with a stark paucity of detailed simulations of these early phases. Here we present high-resolution non-ideal magneto-hydrodynamic simulations of a Solar mass protostar accreting at rates exceeding 10^{-6} M_{odot} yr^{-1}. We show the results of the accretion flow for four different protostellar magnetic fields, 10 G, 500 G, 1 kG, and 2 kG, combined with a disk magnetic field. For weaker (10 G and 500 G) protostar magnetic fields, accretion occurs via a turbulent boundary layer mode, with disk material impacting across the protostellar surface. In the 500 G model, the presence of a magnetically dominated outflow focuses the accretion towards the equator, slightly enhancing and ordering the accretion. For kG magnetic fields, the disk becomes truncated due to the protostellar dipole and exhibits magnetospheric accretion, with the 2 kG model having accretion bursts induced by the interchange instability. We present bolometric light curves for the models and find that they reproduce observations of Class I protostars from YSOVAR, with high bursts followed by an exponential decay possibly being a signature of instability-driven accretion. Finally, we present the filling fractions of accretion and find that 90\% of the mass is accreted in a surface area fraction of 10-20\%. These simulations will be extended in future work for a broader parameter space, with their high resolution and high temporal spacing able to explore a wide range of interesting protostellar physics.

Incorporation of machine learning (ML) techniques into atomic-scale modeling has proven to be an extremely effective strategy to improve the accuracy and reduce the computational cost of simulations. It also entails conceptual and practical challenges, as it involves combining very different mathematical foundations, as well as software ecosystems that are very well developed in their own merit, but do not share many commonalities. To address these issues and facilitate the adoption of ML in atomistic simulations, we introduce two dedicated software libraries. The first one, metatensor, provides multi-platform and multi-language storage and manipulation of arrays with many potentially sparse indices, designed from the ground up for atomistic ML applications. By combining the actual values with metadata that describes their nature and that facilitates the handling of geometric information and gradients with respect to the atomic positions, metatensor provides a common framework to enable data sharing between ML software -- typically written in Python -- and established atomistic modeling tools -- typically written in Fortran, C or C++. The second library, metatomic, provides an interface to store an atomistic ML model and metadata about this model in a portable way, facilitating the implementation, training and distribution of models, and their use across different simulation packages. We showcase a growing ecosystem of tools, from low-level libraries, training utilities, to interfaces with existing software packages that demonstrate the effectiveness of metatensor and metatomic in bridging the gap between traditional simulation software and modern ML frameworks.

One of the key impediments for developing and assessing robust medical imaging algorithms is limited access to large-scale datasets with suitable annotations. Synthetic data generated with plausible physical and biological constraints may address some of these data limitations. We propose the use of physics simulations to generate synthetic images with pixel-level segmentation annotations, which are notoriously difficult to obtain. Specifically, we apply this approach to breast imaging analysis and release T-SYNTH, a large-scale open-source dataset of paired 2D digital mammography (DM) and 3D digital breast tomosynthesis (DBT) images. Our initial experimental results indicate that T-SYNTH images show promise for augmenting limited real patient datasets for detection tasks in DM and DBT. Our data and code are publicly available at https://github.com/DIDSR/tsynth-release.

We introduce ensembles within score-based sampling methods to develop gradient-free approximate sampling techniques that leverage the collective dynamics of particle ensembles to compute approximate reverse diffusion drifts. We introduce the underlying methodology, emphasizing its relationship with generative diffusion models and the previously introduced F\"ollmer sampler. We demonstrate the efficacy of ensemble strategies through various examples, ranging from low- to medium-dimensionality sampling problems, including multi-modal and highly non-Gaussian probability distributions, and provide comparisons to traditional methods like NUTS. Our findings highlight the potential of ensemble strategies for modeling complex probability distributions in situations where gradients are unavailable. Finally, we showcase its application in the context of Bayesian inversion problems within the geophysical sciences.

We introduce rd-spiral, an open-source Python library for simulating 2D reaction-diffusion systems using pseudo-spectral methods. The framework combines FFT-based spatial discretization with adaptive Dormand-Prince time integration, achieving exponential convergence while maintaining pedagogical clarity. We analyze three dynamical regimes: stable spirals, spatiotemporal chaos, and pattern decay, revealing extreme non-Gaussian statistics (kurtosis >96) in stable states. Information-theoretic metrics show 10.7% reduction in activator-inhibitor coupling during turbulence versus 6.5% in stable regimes. The solver handles stiffness ratios >6:1 with features including automated equilibrium classification and checkpointing. Effect sizes (delta=0.37--0.78) distinguish regimes, with asymmetric field sensitivities to perturbations. By balancing computational rigor with educational transparency, rd-spiral bridges theoretical and practical nonlinear dynamics.

An implicit Euler finite-volume scheme for a nonlocal cross-diffusion system on the multidimensional torus is analyzed. The equations describe the dynamics of population species with repulsive or attractive interactions. The numerical scheme is based on a generalized Scharfetter-Gummel discretization of the nonlocal flux term. For merely integrable kernel functions, the scheme preserves the positivity, total mass, and entropy structure. The existence of a discrete solution and its convergence to a solution to the continuous problem, as the mesh size tends to zero, are shown. A key difficulty is the degeneracy of the generalized Bernoulli function in the Scharfetter-Gummel approximation. This issue is overcome by proving a uniform estimate for the discrete Fisher information, which requires both the Boltzmann and Rao entropy inequalities. Numerical simulations illustrate the features of the scheme in one and two space dimensions.

Mesh-based simulations are central to modeling complex physical systems in many disciplines across science and engineering. Mesh representations support powerful numerical integration methods and their resolution can be adapted to strike favorable trade-offs between accuracy and efficiency. However, high-dimensional scientific simulations are very expensive to run, and solvers and parameters must often be tuned individually to each system studied. Here we introduce MeshGraphNets, a framework for learning mesh-based simulations using graph neural networks. Our model can be trained to pass messages on a mesh graph and to adapt the mesh discretization during forward simulation. Our results show it can accurately predict the dynamics of a wide range of physical systems, including aerodynamics, structural mechanics, and cloth. The model's adaptivity supports learning resolution-independent dynamics and can scale to more complex state spaces at test time. Our method is also highly efficient, running 1-2 orders of magnitude faster than the simulation on which it is trained. Our approach broadens the range of problems on which neural network simulators can operate and promises to improve the efficiency of complex, scientific modeling tasks.

Sampling equilibrium molecular configurations from the Boltzmann distribution is a longstanding challenge. Boltzmann Generators (BGs) address this by combining exact-likelihood generative models with importance sampling, but practical scalability is limited. Meanwhile, coarse-grained surrogates enable the modeling of larger systems by reducing effective dimensionality, yet often lack a reweighting procedure required to ensure asymptotically correct statistics. In this work, we propose Coarse-Grained Boltzmann Generators (CG-BGs), a framework for reduced-order generative modeling with importance sampling in coarse-grained coordinate space. CG-BGs generate samples using a flow-based model and reweight them using a learned potential of mean force (PMF). We show that the PMF can be learned from rapidly converged trajectories via enhanced sampling force matching. Experiments demonstrate that CG-BGs capture solvent-mediated interactions in highly reduced representations while substantially reducing computational cost relative to atomistic BGs, providing a practical route toward equilibrium sampling of larger molecular systems.

The objective of this study is to develop a fully compressible magnetohydrodynamic solver for fast simulations of the global dynamo of the Sun using unstructured grids and GPUs. Accurate modeling of the Sun's convective layers is vital to predicting the Sun's behavior, including the solar dynamo and sunspot cycles. Currently, there are many efficient codes capable of conducting these large simulations; however, many assume an anealastic density distribution. The anelastic assumption is capable of producing accurate results for low mach numbers; however, it fails in regions with a higher mach number and a fully compressible flow must be considered. To avoid these issues, Wang et al. [1] created a Compressible High-ORder Unstructured Spectral difference (CHORUS) code for simulating fluid dynamics inside stars and planets. CHORUS++ augmented the CHORUS code to adopt a higher degree of polynomials by using cubed-sphere meshing and transfinite mapping to perform simulations on unstructured grids [2]. Recently, CHORUS++ was further developed for parallel magnetohydrodynamic (MHD) solutions on GPUs at Clarkson University. In this study the solar benchmark problems presented by Chen et al. [2] are extended to unsteady solar dynamo problems, with two different density scale heights. The CHORUS-MHD code is further accelerated by multiple GPUs and used to successfully solve these solar dynamo benchmark problems. [1] Wang, J., Liang, C., and Miesch, M. S., "A Compressible High-Order Unstructured Spectral Difference Code for Stratified Convection in Rotating Spherical Shells," Journal of Computational Physics, Vol. 290, 2015, pp. 90-111. [2] Chen, K., Liang, C., and Wan, M., "Arbitrarily high-order accurate simulations of compressible rotationally constrained convection using a transfinite mapping on cubed-sphere grids," Physics of Fluids, Vol. 35, 2023, p. 086120.

We present PDE-Agents, a multi-agent ecosystem that automates the full lifecycle of partial differential equation (PDE) / finite element method (FEM) simulations through natural-language interaction. Three specialist large language model (LLM) agents (Simulation, Analytics, Database) are orchestrated via a LangGraph supervisor, with a local open-source LLM stack (Qwen3-Coder-Next, Llama 4 Scout) on dual NVIDIA RTX PRO 6000 GPUs. The architecture is model-agnostic, validated across two LLM generations. A GraphRAG knowledge base (Neo4j, 768-d vector embeddings) encodes curated material properties, known failure patterns, and prior run lineage. We report seven contributions: (i) a verification and validation (V&V) study confirming second-order spatial convergence (O(h^2)) on the heat-equation solver; (ii) a three-way ablation over 50 tasks with a frozen KG (KG On, KG Off, KG Smart), where KG Smart reaches 100% success and the highest output quality (physics 0.933 vs. 0.853 for KG Off; MPF 0.926 vs. 0.796); (iii) a novel-material experiment with three fictional materials known only to the KG, where KG Smart attains near-perfect material property fidelity (MPF = 1.00) versus 0.34 for the KG-free baseline; (iv) a failure analysis tracing KG On's three failures to budget exhaustion and timeout, establishing warm-start injection as the dominant reliability factor; (v) an adaptive framework selecting the optimal retrieval mode per task; (vi) production metrics from 1,369 runs (97.8% success, 57.6% first-try); and (vii) a 100-task KG growth experiment showing a difficulty-dependent gain, with hard-task MPF improving 8.8% while easy/novel tasks stay at ceiling. All code, models, and evaluation artifacts are released openly. Our findings show that integration pattern, not knowledge content, determines whether GraphRAG augmentation helps or hinders LLM agents.

We introduce MAGNeT, a masked generative sequence modeling method that operates directly over several streams of audio tokens. Unlike prior work, MAGNeT is comprised of a single-stage, non-autoregressive transformer. During training, we predict spans of masked tokens obtained from a masking scheduler, while during inference we gradually construct the output sequence using several decoding steps. To further enhance the quality of the generated audio, we introduce a novel rescoring method in which, we leverage an external pre-trained model to rescore and rank predictions from MAGNeT, which will be then used for later decoding steps. Lastly, we explore a hybrid version of MAGNeT, in which we fuse between autoregressive and non-autoregressive models to generate the first few seconds in an autoregressive manner while the rest of the sequence is being decoded in parallel. We demonstrate the efficiency of MAGNeT for the task of text-to-music and text-to-audio generation and conduct an extensive empirical evaluation, considering both objective metrics and human studies. The proposed approach is comparable to the evaluated baselines, while being significantly faster (x7 faster than the autoregressive baseline). Through ablation studies and analysis, we shed light on the importance of each of the components comprising MAGNeT, together with pointing to the trade-offs between autoregressive and non-autoregressive modeling, considering latency, throughput, and generation quality. Samples are available on our demo page https://pages.cs.huji.ac.il/adiyoss-lab/MAGNeT.

Within the paradigm of metamaterials and metasurfaces, electromagnetic properties of composite materials can be engineered by shaping or modulating their constituents, so-called meta-atoms. Synthesis and analysis of complex-shape meta-atoms with general polarization properties is a challenging task. In this paper, we demonstrate that the most general response can be conceptually decomposed into a set of basic, fundamental polarization phenomena, which enables immediate all-direction characterization of electromagnetic properties of arbitrary linear metamaterials and metasurfaces. The proposed platform of modular characterization (called "materiatronics") is tested on several examples of bianisotropic and nonreciprocal meta-atoms. As a demonstration of the potential of the modular analysis, we use it to design a single-layer metasurface of vanishing thickness with unitary circular dichroism. The analysis approach developed in this paper is supported by a ready-to-use computational code and can be further extended to meta-atoms engineered for other types of wave interactions, such as acoustics and mechanics.