Daily Papers

Smart meter data is the foundation for planning and operating the distribution network. Unfortunately, such data are not always available due to privacy regulations. Meanwhile, the collected data may be corrupted due to sensor or transmission failure, or it may not have sufficient resolution for downstream tasks. A wide range of generative tasks is formulated to address these issues, including synthetic data generation, missing data imputation, and super-resolution. Despite the success of machine learning models on these tasks, dedicated models need to be designed and trained for each task, leading to redundancy and inefficiency. In this paper, by recognizing the powerful modeling capability of flow matching models, we propose a new approach to unify diverse smart meter data generative tasks with a single model trained for conditional generation. The proposed flow matching models are trained to generate challenging, high-dimensional time series data, specifically monthly smart meter data at a 15 min resolution. By viewing different generative tasks as distinct forms of partial data observations and injecting them into the generation process, we unify tasks such as imputation and super-resolution with a single model, eliminating the need for re-training. The data generated by our model not only are consistent with the given observations but also remain realistic, showing better performance against interpolation and other machine learning based baselines dedicated to the tasks.

Millions of smart meters have been deployed worldwide, collecting the total power consumed by individual households. Based on these data, electricity suppliers offer their clients energy monitoring solutions to provide feedback on the consumption of their individual appliances. Historically, such estimates have relied on statistical methods that use coarse-grained total monthly consumption and static customer data, such as appliance ownership. Non-Intrusive Load Monitoring (NILM) is the problem of disaggregating a household's collected total power consumption to retrieve the consumed power for individual appliances. Current state-of-the-art (SotA) solutions for NILM are based on deep-learning (DL) and operate on subsequences of an entire household consumption reading. However, the non-stationary nature of real-world smart meter data leads to a drift in the data distribution within each segmented window, which significantly affects model performance. This paper introduces NILMFormer, a Transformer-based architecture that incorporates a new subsequence stationarization/de-stationarization scheme to mitigate the distribution drift and that uses a novel positional encoding that relies only on the subsequence's timestamp information. Experiments with 4 real-world datasets show that NILMFormer significantly outperforms the SotA approaches. Our solution has been deployed as the backbone algorithm for EDF's (Electricit\'e De France) consumption monitoring service, delivering detailed insights to millions of customers about their individual appliances' power consumption. This paper appeared in KDD 2025.

Heat pumps are essential for decarbonizing residential heating but consume substantial electrical energy, impacting operational costs and grid demand. Many systems run inefficiently due to planning flaws, operational faults, or misconfigurations. While optimizing performance requires skilled professionals, labor shortages hinder large-scale interventions. However, digital tools and improved data availability create new service opportunities for energy efficiency, predictive maintenance, and demand-side management. To support research and practical solutions, we present an open-source dataset of electricity consumption from 1,408 households with heat pumps and smart electricity meters in the canton of Zurich, Switzerland, recorded at 15-minute and daily resolutions between 2018-11-03 and 2024-03-21. The dataset includes household metadata, weather data from 8 stations, and ground truth data from 410 field visit protocols collected by energy consultants during system optimizations. Additionally, the dataset includes a Python-based data loader to facilitate seamless data processing and exploration.

We present a large real-world dataset obtained from monitoring a smart company facility over the course of six years, from 2018 to 2023. The dataset includes energy consumption data from various facility areas and components, energy production data from a photovoltaic system and a combined heat and power plant, operational data from heating and cooling systems, and weather data from an on-site weather station. The measurement sensors installed throughout the facility are organized in a hierarchical metering structure with multiple sub-metering levels, which is reflected in the dataset. The dataset contains measurement data from 72 energy meters, 9 heat meters and a weather station. Both raw and processed data at different processing levels, including labeled issues, is available. In this paper, we describe the data acquisition and post-processing employed to create the dataset. The dataset enables the application of a wide range of methods in the domain of energy management, including optimization, modeling, and machine learning to optimize building operations and reduce costs and carbon emissions.

Many smart grid applications involve data mining, clustering, classification, identification, and anomaly detection, among others. These applications primarily depend on the measurement of similarity, which is the distance between different time series or subsequences of a time series. The commonly used time series distance measures, namely Euclidean Distance (ED) and Dynamic Time Warping (DTW), do not quantify the flexible nature of electricity usage data in terms of temporal dynamics. As a result, there is a need for a new distance measure that can quantify both the amplitude and temporal changes of electricity time series for smart grid applications, e.g., demand response and load profiling. This paper introduces a novel distance measure to compare electricity usage patterns. The method consists of two phases that quantify the effort required to reshape one time series into another, considering both amplitude and temporal changes. The proposed method is evaluated against ED and DTW using real-world data in three smart grid applications. Overall, the proposed measure outperforms ED and DTW in accurately identifying the best load scheduling strategy, anomalous days with irregular electricity usage, and determining electricity users' behind-the-meter (BTM) equipment.

Smart home energy management systems help the distribution grid operate more efficiently and reliably, and enable effective penetration of distributed renewable energy sources. These systems rely on robust forecasting, optimization, and control/scheduling algorithms that can handle the uncertain nature of demand and renewable generation. This paper proposes an advanced ML algorithm, called Recurrent Trend Predictive Neural Network based Forecast Embedded Scheduling (rTPNN-FES), to provide efficient residential demand control. rTPNN-FES is a novel neural network architecture that simultaneously forecasts renewable energy generation and schedules household appliances. By its embedded structure, rTPNN-FES eliminates the utilization of separate algorithms for forecasting and scheduling and generates a schedule that is robust against forecasting errors. This paper also evaluates the performance of the proposed algorithm for an IoT-enabled smart home. The evaluation results reveal that rTPNN-FES provides near-optimal scheduling 37.5 times faster than the optimization while outperforming state-of-the-art forecasting techniques.

Non-Intrusive Load Monitoring (NILM) offers a cost-effective method to obtain fine-grained appliance-level energy consumption in smart homes and building applications. However, the increasing adoption of behind-the-meter (BTM) energy sources such as solar panels and battery storage poses new challenges for conventional NILM methods that rely solely on at-the-meter data. The energy injected from the BTM sources can obscure the power signatures of individual appliances, leading to a significant decrease in NILM performance. To address this challenge, we present DualNILM, a deep multi-task learning framework designed for the dual tasks of appliance state recognition and injected energy identification. Using a Transformer-based architecture that integrates sequence-to-point and sequence-to-sequence strategies, DualNILM effectively captures multiscale temporal dependencies in the aggregate power consumption patterns, allowing for accurate appliance state recognition and energy injection identification. Extensive evaluation on self-collected and synthesized datasets demonstrates that DualNILM maintains an excellent performance for dual tasks in NILM, much outperforming conventional methods. Our work underscores the framework's potential for robust energy disaggregation in modern energy systems with renewable penetration. Synthetic photovoltaic augmented datasets with realistic injection simulation methodology are open-sourced at https://github.com/MathAdventurer/PV-Augmented-NILM-Datasets.

Time series data is a prevalent form of data found in various fields. It consists of a series of measurements taken over time. Forecasting is a crucial application of time series models, where future values are predicted based on historical data. Accurate forecasting is essential for making well-informed decisions across industries. When it comes to electric vehicles (EVs), precise predictions play a key role in planning infrastructure development, load balancing, and energy management. This study introduces a BI-LSTM embedding denoising autoencoder model (BDM) designed to address time series problems, focusing on short-term EV charging load prediction. The performance of the proposed model is evaluated by comparing it with benchmark models like Transformer, CNN, RNN, LSTM, and GRU. Based on the results of the study, the proposed model outperforms the benchmark models in four of the five-time steps, demonstrating its effectiveness for time series forecasting. This research makes a significant contribution to enhancing time series forecasting, thereby improving decision-making processes.

Industrial Non-Intrusive Load Monitoring (NILM) is limited by the scarcity of high-quality datasets and the complex variability of industrial energy consumption patterns. To address data scarcity and privacy issues, we introduce the Synthetic Industrial Dataset for Energy Disaggregation (SIDED), an open-source dataset generated using Digital Twin simulations. SIDED includes three types of industrial facilities across three different geographic locations, capturing diverse appliance behaviors, weather conditions, and load profiles. We also propose the Appliance-Modulated Data Augmentation (AMDA) method, a computationally efficient technique that enhances NILM model generalization by intelligently scaling appliance power contributions based on their relative impact. We show in experiments that NILM models trained with AMDA-augmented data significantly improve the disaggregation of energy consumption of complex industrial appliances like combined heat and power systems. Specifically, in our out-of-sample scenarios, models trained with AMDA achieved a Normalized Disaggregation Error of 0.093, outperforming models trained without data augmentation (0.451) and those trained with random data augmentation (0.290). Data distribution analyses confirm that AMDA effectively aligns training and test data distributions, enhancing model generalization.

Local Energy Communities are emerging as crucial players in the landscape of sustainable development. A significant challenge for these communities is achieving self-sufficiency through effective management of the balance between energy production and consumption. To meet this challenge, it is essential to develop and implement forecasting models that deliver accurate predictions, which can then be utilized by optimization and planning algorithms. However, the application of forecasting solutions is often hindered by privacy constrains and regulations as the users participating in the Local Energy Community can be (rightfully) reluctant sharing their consumption patterns with others. In this context, the use of Federated Learning (FL) can be a viable solution as it allows to create a forecasting model without the need to share privacy sensitive information among the users. In this study, we demonstrate how FL and long short-term memory (LSTM) networks can be employed to achieve this objective, highlighting the trade-off between data sharing and forecasting accuracy.

Accurate electricity load forecasting is essential for grid stability, resource optimization, and renewable energy integration. While transformer-based deep learning models like TimeGPT have gained traction in time-series forecasting, their effectiveness in long-term electricity load prediction remains uncertain. This study evaluates forecasting models ranging from classical regression techniques to advanced deep learning architectures using data from the ESD 2025 competition. The dataset includes two years of historical electricity load data, alongside temperature and global horizontal irradiance (GHI) across five sites, with a one-day-ahead forecasting horizon. Since actual test set load values remain undisclosed, leveraging predicted values would accumulate errors, making this a long-term forecasting challenge. We employ (i) Principal Component Analysis (PCA) for dimensionality reduction and (ii) frame the task as a regression problem, using temperature and GHI as covariates to predict load for each hour, (iii) ultimately stacking 24 models to generate yearly forecasts. Our results reveal that deep learning models, including TimeGPT, fail to consistently outperform simpler statistical and machine learning approaches due to the limited availability of training data and exogenous variables. In contrast, XGBoost, with minimal feature engineering, delivers the lowest error rates across all test cases while maintaining computational efficiency. This highlights the limitations of deep learning in long-term electricity forecasting and reinforces the importance of model selection based on dataset characteristics rather than complexity. Our study provides insights into practical forecasting applications and contributes to the ongoing discussion on the trade-offs between traditional and modern forecasting methods.

This paper investigates the potential privacy risks associated with forecasting models, with specific emphasis on their application in the context of smart grids. While machine learning and deep learning algorithms offer valuable utility, concerns arise regarding their exposure of sensitive information. Previous studies have focused on classification models, overlooking risks associated with forecasting models. Deep learning based forecasting models, such as Long Short Term Memory (LSTM), play a crucial role in several applications including optimizing smart grid systems but also introduce privacy risks. Our study analyzes the ability of forecasting models to leak global properties and privacy threats in smart grid systems. We demonstrate that a black box access to an LSTM model can reveal a significant amount of information equivalent to having access to the data itself (with the difference being as low as 1% in Area Under the ROC Curve). This highlights the importance of protecting forecasting models at the same level as the data.

Electrification of vehicles is a potential way of reducing fossil fuel usage and thus lessening environmental pollution. Electric Vehicles (EVs) of various types for different transport modes (including air, water, and land) are evolving. Moreover, different EV user groups (commuters, commercial or domestic users, drivers) may use different charging infrastructures (public, private, home, and workplace) at various times. Therefore, usage patterns and energy demand are very stochastic. Characterizing and forecasting the charging demand of these diverse EV usage profiles is essential in preventing power outages. Previously developed data-driven load models are limited to specific use cases and locations. None of these models are simultaneously adaptive enough to transfer knowledge of day-ahead forecasting among EV charging sites of diverse locations, trained with limited data, and cost-effective. This article presents a location-based load forecasting of EV charging sites using a deep Multi-Quantile Temporal Convolutional Network (MQ-TCN) to overcome the limitations of earlier models. We conducted our experiments on data from four charging sites, namely Caltech, JPL, Office-1, and NREL, which have diverse EV user types like students, full-time and part-time employees, random visitors, etc. With a Prediction Interval Coverage Probability (PICP) score of 93.62\%, our proposed deep MQ-TCN model exhibited a remarkable 28.93\% improvement over the XGBoost model for a day-ahead load forecasting at the JPL charging site. By transferring knowledge with the inductive Transfer Learning (TL) approach, the MQ-TCN model achieved a 96.88\% PICP score for the load forecasting task at the NREL site using only two weeks of data.

A critical aspect of power systems research is the availability of suitable data, access to which is limited by privacy concerns and the sensitive nature of energy infrastructure. This lack of data, in turn, hinders the development of modern research avenues such as machine learning approaches or stochastic formulations. To overcome this challenge, this paper proposes a systematic, data-driven framework for reconstructing high-fidelity time series, using publicly-available grid snapshots and historical data published by transmission system operators. The proposed approach, from geo-spatial data and generation capacity reconstruction, to time series disaggregation, is applied to the French transmission grid. Thereby, synthetic but highly realistic time series data, spanning multiple years with a 5-minute granularity, is generated at the individual component level.

Reducing methane emissions is essential for mitigating global warming. To attribute methane emissions to their sources, a comprehensive dataset of methane source infrastructure is necessary. Recent advancements with deep learning on remotely sensed imagery have the potential to identify the locations and characteristics of methane sources, but there is a substantial lack of publicly available data to enable machine learning researchers and practitioners to build automated mapping approaches. To help fill this gap, we construct a multi-sensor dataset called METER-ML containing 86,599 georeferenced NAIP, Sentinel-1, and Sentinel-2 images in the U.S. labeled for the presence or absence of methane source facilities including concentrated animal feeding operations, coal mines, landfills, natural gas processing plants, oil refineries and petroleum terminals, and wastewater treatment plants. We experiment with a variety of models that leverage different spatial resolutions, spatial footprints, image products, and spectral bands. We find that our best model achieves an area under the precision recall curve of 0.915 for identifying concentrated animal feeding operations and 0.821 for oil refineries and petroleum terminals on an expert-labeled test set, suggesting the potential for large-scale mapping. We make METER-ML freely available at https://stanfordmlgroup.github.io/projects/meter-ml/ to support future work on automated methane source mapping.

Buildings are significant contributors to global greenhouse gas emissions, accounting for 26% of global energy sector emissions in 2022. Meeting net zero goals requires a rapid reduction in building emissions, both directly from the buildings and indirectly from the production of electricity and heat used in buildings. National energy planning for net zero demands both detailed and comprehensive building energy consumption data. However, geo-located building-level energy data is rarely available in Europe, with analysis typically relying on anonymised, simulated or low-resolution data. To address this problem, we introduce a dataset of Neighbourhood Energy, Buildings, and Urban Landscapes (NEBULA) for modelling domestic energy consumption for small neighbourhoods (5-150 households). NEBULA integrates data on building characteristics, climate, urbanisation, environment, and socio-demographics and contains 609,964 samples across England and Wales.

As smart grids (SG) increasingly rely on advanced technologies like sensors and communication systems for efficient energy generation, distribution, and consumption, they become enticing targets for sophisticated cyberattacks. These evolving threats demand robust security measures to maintain the stability and resilience of modern energy systems. While extensive research has been conducted, a comprehensive exploration of proactive cyber defense strategies utilizing Deep Learning (DL) in {SG} remains scarce in the literature. This survey bridges this gap, studying the latest DL techniques for proactive cyber defense. The survey begins with an overview of related works and our distinct contributions, followed by an examination of SG infrastructure. Next, we classify various cyber defense techniques into reactive and proactive categories. A significant focus is placed on DL-enabled proactive defenses, where we provide a comprehensive taxonomy of DL approaches, highlighting their roles and relevance in the proactive security of SG. Subsequently, we analyze the most significant DL-based methods currently in use. Further, we explore Moving Target Defense, a proactive defense strategy, and its interactions with DL methodologies. We then provide an overview of benchmark datasets used in this domain to substantiate the discourse.{ This is followed by a critical discussion on their practical implications and broader impact on cybersecurity in Smart Grids.} The survey finally lists the challenges associated with deploying DL-based security systems within SG, followed by an outlook on future developments in this key field.

Accurate power load forecasting is essential for the efficient operation and planning of electrical grids, particularly given the increased variability and complexity introduced by renewable energy sources. This paper introduces GAT-LSTM, a hybrid model that combines Graph Attention Networks (GAT) and Long Short-Term Memory (LSTM) networks. A key innovation of the model is the incorporation of edge attributes, such as line capacities and efficiencies, into the attention mechanism, enabling it to dynamically capture spatial relationships grounded in grid-specific physical and operational constraints. Additionally, by employing an early fusion of spatial graph embeddings and temporal sequence features, the model effectively learns and predicts complex interactions between spatial dependencies and temporal patterns, providing a realistic representation of the dynamics of power grids. Experimental evaluations on the Brazilian Electricity System dataset demonstrate that the GAT-LSTM model significantly outperforms state-of-the-art models, achieving reductions of 21. 8% in MAE, 15. 9% in RMSE and 20. 2% in MAPE. These results underscore the robustness and adaptability of the GAT-LSTM model, establishing it as a powerful tool for applications in grid management and energy planning.

Accurate forecasting of electrical demand is essential for maintaining a stable and reliable power grid, optimizing the allocation of energy resources, and promoting efficient energy consumption practices. This study investigates the effectiveness of five hyperparameter optimization (HPO) algorithms -- Random Search, Covariance Matrix Adaptation Evolution Strategy (CMA--ES), Bayesian Optimization, Partial Swarm Optimization (PSO), and Nevergrad Optimizer (NGOpt) across univariate and multivariate Short-Term Load Forecasting (STLF) tasks. Using the Panama Electricity dataset (n=48,049), we evaluate HPO algorithms' performances on a surrogate forecasting algorithm, XGBoost, in terms of accuracy (i.e., MAPE, R^2) and runtime. Performance plots visualize these metrics across varying sample sizes from 1,000 to 20,000, and Kruskal--Wallis tests assess the statistical significance of the performance differences. Results reveal significant runtime advantages for HPO algorithms over Random Search. In univariate models, Bayesian optimization exhibited the lowest accuracy among the tested methods. This study provides valuable insights for optimizing XGBoost in the STLF context and identifies areas for future research.

The widespread adoption of electric vehicles (EVs) has increased the importance of demand response in smart grids. This paper proposes a two-layer demand response optimization framework for EV users and aggregators, leveraging large language models (LLMs) to balance electricity supply and demand and optimize energy utilization during EV charging. The upper-layer model, focusing on the aggregator, aims to maximize profits by adjusting retail electricity prices. The lower-layer model targets EV users, using LLMs to simulate charging demands under varying electricity prices and optimize both costs and user comfort. The study employs a multi-threaded LLM decision generator to dynamically analyze user behavior, charging preferences, and psychological factors. The framework utilizes the PSO method to optimize electricity prices, ensuring user needs are met while increasing aggregator profits. Simulation results show that the proposed model improves EV charging efficiency, alleviates peak power loads, and stabilizes smart grid operations.

The variability of wind power supply can present substantial challenges to incorporating wind power into a grid system. Thus, Wind Power Forecasting (WPF) has been widely recognized as one of the most critical issues in wind power integration and operation. There has been an explosion of studies on wind power forecasting problems in the past decades. Nevertheless, how to well handle the WPF problem is still challenging, since high prediction accuracy is always demanded to ensure grid stability and security of supply. We present a unique Spatial Dynamic Wind Power Forecasting dataset: SDWPF, which includes the spatial distribution of wind turbines, as well as the dynamic context factors. Whereas, most of the existing datasets have only a small number of wind turbines without knowing the locations and context information of wind turbines at a fine-grained time scale. By contrast, SDWPF provides the wind power data of 134 wind turbines from a wind farm over half a year with their relative positions and internal statuses. We use this dataset to launch the Baidu KDD Cup 2022 to examine the limit of current WPF solutions. The dataset is released at https://aistudio.baidu.com/aistudio/competition/detail/152/0/datasets.

Operational forecasting of the ionosphere remains a critical space weather challenge due to sparse observations, complex coupling across geospatial layers, and a growing need for timely, accurate predictions that support Global Navigation Satellite System (GNSS), communications, aviation safety, as well as satellite operations. As part of the 2025 NASA Heliolab, we present a curated, open-access dataset that integrates diverse ionospheric and heliospheric measurements into a coherent, machine learning-ready structure, designed specifically to support next-generation forecasting models and address gaps in current operational frameworks. Our workflow integrates a large selection of data sources comprising Solar Dynamic Observatory data, solar irradiance indices (F10.7), solar wind parameters (velocity and interplanetary magnetic field), geomagnetic activity indices (Kp, AE, SYM-H), and NASA JPL's Global Ionospheric Maps of Total Electron Content (GIM-TEC). We also implement geospatially sparse data such as the TEC derived from the World-Wide GNSS Receiver Network and crowdsourced Android smartphone measurements. This novel heterogeneous dataset is temporally and spatially aligned into a single, modular data structure that supports both physical and data-driven modeling. Leveraging this dataset, we train and benchmark several spatiotemporal machine learning architectures for forecasting vertical TEC under both quiet and geomagnetically active conditions. This work presents an extensive dataset and modeling pipeline that enables exploration of not only ionospheric dynamics but also broader Sun-Earth interactions, supporting both scientific inquiry and operational forecasting efforts.

Internet of Things (IoT) applications have opened up numerous possibilities to improve our lives. Most of the remote devices, part of the IoT network, such as smartphones, data loggers and wireless sensors are battery powered. It is vital to collect battery measurement data (Voltage or State-of-Charge (SOC)) from these remote devices. Presence of noise in these measurements restricts effective utilization of this dataset. This paper presents the application of Unscented Kalman Filter (UKF) to mitigate measurement noise in smartphone dataset. The simplicity of this technique makes it a constructive approach for noise removal. The datasets obtained after noise removal could be used to improve data-driven time series forecasting models which aid to accurately estimate critical battery parameters such as SOC. UKF was tested on noisy charge and discharge dataset of a smartphone. An overall Mean Squared Error (MSE) of 0.0017 and 0.0010 was obtained for Voltage charge and discharge measurements. MSE for SOC charge and discharge data measurements were 0.0018 and 0.0010 respectively.

Real-time energy forecasting on edge devices represents a major challenge for smart grid optimization and intelligent buildings. We present LAD-BNet (Lag-Aware Dual-Branch Network), an innovative neural architecture optimized for edge inference with Google Coral TPU. Our hybrid approach combines a branch dedicated to explicit exploitation of temporal lags with a Temporal Convolutional Network (TCN) featuring dilated convolutions, enabling simultaneous capture of short and long-term dependencies. Tested on real energy consumption data with 10-minute temporal resolution, LAD-BNet achieves 14.49% MAPE at 1-hour horizon with only 18ms inference time on Edge TPU, representing an 8-12 x acceleration compared to CPU. The multi-scale architecture enables predictions up to 12 hours with controlled performance degradation. Our model demonstrates a 2.39% improvement over LSTM baselines and 3.04% over pure TCN architectures, while maintaining a 180MB memory footprint suitable for embedded device constraints. These results pave the way for industrial applications in real-time energy optimization, demand management, and operational planning.