Daily Papers

Industrial procurement requires language models to bridge informal buyer jargon, sparse marketplace attributes, and authoritative engineering standards under strict safety tolerances. We present IndustryLLM, an open-weight industrial language model trained from Qwen3.5-35B-A3B-Base (35B total parameters with ~3B activated per token, with the vision encoder frozen). Rather than relying on generic text scaling, we introduce a failure-driven adaptation recipe spanning continued pre-training (CPT) and supervised fine-tuning (SFT). CPT leverages a curated ~100B-token corpus integrating 5B tokens of national standards (e.g., GB/T) and technical archives, 10B tokens of de-identified real-world industrial transaction and inquiry records, and 60B tokens of general replay. To overcome register mismatch and factual brittleness, we systematically reconstruct an estimated 20B-token domain subset via multi-register rewriting across 10 genres and 8 writing styles, confidence-routed minimal factual editing, and error-targeted QA synthesis (resolving colloquial typos like '42-luo-mu' -> 42CrMo, expanding ambiguous codes like '16674' -> GB/T 16674, and clarifying conflicting dimensional specs). For downstream deployment, we formalize an evidence-gated constraint-evaluation interface enforcing three-valued logic where unverified product evidence remains unknown rather than satisfied. Offline evaluations demonstrate consistent gains on procurement-query structuring (+2.97 percentage points in exact match, 95% CI [2.11, 3.86] in No-Think mode), while randomized online A/B experiments in production yield substantial improvements (+4.25% GMV, +8.3% satisfied inquiries) alongside a latency reduction from 6-7 s to 1.5 s. Model weights and configs are released at https://huggingface.co/alibaba-multimodal-industrial-ai/IndustryLLM.

Optimizing Register Transfer Level (RTL) code is crucial for improving the power, performance, and area (PPA) of digital circuits in the early stages of synthesis. Manual rewriting, guided by synthesis feedback, can yield high-quality results but is time-consuming and error-prone. Most existing compiler-based approaches have difficulty handling complex design constraints. Large Language Model (LLM)-based methods have emerged as a promising alternative to address these challenges. However, LLM-based approaches often face difficulties in ensuring alignment between the generated code and the provided prompts. This paper presents SymRTLO, a novel neuron-symbolic RTL optimization framework that seamlessly integrates LLM-based code rewriting with symbolic reasoning techniques. Our method incorporates a retrieval-augmented generation (RAG) system of optimization rules and Abstract Syntax Tree (AST)-based templates, enabling LLM-based rewriting that maintains syntactic correctness while minimizing undesired circuit behaviors. A symbolic module is proposed for analyzing and optimizing finite state machine (FSM) logic, allowing fine-grained state merging and partial specification handling beyond the scope of pattern-based compilers. Furthermore, a fast verification pipeline, combining formal equivalence checks with test-driven validation, further reduces the complexity of verification. Experiments on the RTL-Rewriter benchmark with Synopsys Design Compiler and Yosys show that SymRTLO improves power, performance, and area (PPA) by up to 43.9%, 62.5%, and 51.1%, respectively, compared to the state-of-the-art methods.

Automatic Differentiation (AD) has become a dominant technique in ML. AD frameworks have first been implemented for imperative languages using tapes. Meanwhile, functional implementations of AD have been developed, often based on dual numbers, which are close to the formal specification of differentiation and hence easier to prove correct. But these papers have focussed on correctness not efficiency. Recently, it was shown how an approach using dual numbers could be made efficient through the right optimizations. Optimizations are highly dependent on order, as one optimization can enable another. It can therefore be useful to have fine-grained control over the scheduling of optimizations. One method expresses compiler optimizations as rewrite rules, whose application can be combined and controlled using strategy languages. Previous work describes the use of term rewriting and strategies to generate high-performance code in a compiler for a functional language. In this work, we implement dual numbers AD in a functional array programming language using rewrite rules and strategy combinators for optimization. We aim to combine the elegance of differentiation using dual numbers with a succinct expression of the optimization schedule using a strategy language. We give preliminary evidence suggesting the viability of the approach on a micro-benchmark.

As mathematical computing becomes more democratized in high-level languages, high-performance symbolic-numeric systems are necessary for domain scientists and engineers to get the best performance out of their machine without deep knowledge of code optimization. Naturally, users need different term types either to have different algebraic properties for them, or to use efficient data structures. To this end, we developed Symbolics.jl, an extendable symbolic system which uses dynamic multiple dispatch to change behavior depending on the domain needs. In this work we detail an underlying abstract term interface which allows for speed without sacrificing generality. We show that by formalizing a generic API on actions independent of implementation, we can retroactively add optimized data structures to our system without changing the pre-existing term rewriters. We showcase how this can be used to optimize term construction and give a 113x acceleration on general symbolic transformations. Further, we show that such a generic API allows for complementary term-rewriting implementations. We demonstrate the ability to swap between classical term-rewriting simplifiers and e-graph-based term-rewriting simplifiers. We showcase an e-graph ruleset which minimizes the number of CPU cycles during expression evaluation, and demonstrate how it simplifies a real-world reaction-network simulation to halve the runtime. Additionally, we show a reaction-diffusion partial differential equation solver which is able to be automatically converted into symbolic expressions via multiple dispatch tracing, which is subsequently accelerated and parallelized to give a 157x simulation speedup. Together, this presents Symbolics.jl as a next-generation symbolic-numeric computing environment geared towards modeling and simulation.

Large language models (LLMs) have advanced significantly in code generation, yet their ability to follow complex programming instructions with layered and diverse constraints remains underexplored. Existing benchmarks often prioritize functional correctness, overlooking the nuanced requirements found in real-world development. We introduce MultiCodeIF, a comprehensive benchmark designed to evaluate instruction-following in code generation across multiple dimensions: constraint type, hierarchical levels, and iterative refinement. Built upon a structured taxonomy of 9 categories and 27 constraint types, MultiCodeIF enables granular assessment of both functional and non-functional instruction adherence. Using an automated pipeline, ConstraGen, we synthesize and evolve 2,021 code tasks sourced from 14 programming languages, supporting multi-turn evaluation through feedback-driven task variants. Empirical evaluation of six state-of-the-art LLMs uncovers substantial performance disparities. The top-performing model, Claude-3-7-Sonnet, achieves 63.0% average constraint satisfaction, while smaller models like Qwen3-1.7B fall to 44.8%. Models perform well on explicit constraints, but struggle with implicit or abstract constraints. Tasks with multiple hierarchical constraints significantly reduce model success rates, from 54.5% in single-level to just 18.8% in multi-level scenarios. However, structured feedback enables progressive improvement: average constraint satisfaction rises from 63.0% to 83.4% over four iterative refinement rounds. MultiCodeIF provides a scalable, constraint-aware, and feedback-sensitive framework to benchmark LLMs under realistic code generation scenarios, bridging the gap between synthetic evaluations and real-world instruction complexity. The full benchmark dataset, evaluation pipeline, and source code are available at https://github.com/SYSUSELab/MultiCodeIF.

Recent advances have demonstrated the promising capabilities of large language models (LLMs) in generating register-transfer level (RTL) code, such as Verilog. However, existing LLM-based frameworks still face significant challenges in accurately handling the complexity of real-world RTL designs, particularly those that are large-scale and involve multi-level module instantiations. To address this issue, we present ComplexVCoder, an open-source LLM-driven framework that enhances both the generation quality and efficiency of complex Verilog code. Specifically, we introduce a two-stage generation mechanism, which leverages an intermediate representation to enable a more accurate and structured transition from natural language descriptions to intricate Verilog designs. In addition, we introduce a rule-based alignment method and a domain-specific retrieval-augmented generation (RAG) to further improve the correctness of the synthesized code by incorporating relevant design knowledge during generation. To evaluate our approach, we construct a comprehensive dataset comprising 55 complex Verilog designs derived from real-world implementations. We also release an open-source benchmark suite for systematically assessing the quality of auto-generated RTL code together with the ComplexVCoder framework. Experimental results show that ComplexVCoder outperforms SOTA frameworks such as CodeV and RTLCoder by 14.6% and 22.2%, respectively, in terms of function correctness on complex Verilog benchmarks. Furthermore, ComplexVcoder achieves comparable generation performances in terms of functionality correctness using a lightweight 32B model (Qwen2.5), rivaling larger-scale models such as GPT-3.5 and DeepSeek-V3.

As an essential part of modern hardware design, manually writing Register Transfer Level (RTL) code such as Verilog is often labor-intensive. Following the tremendous success of large language models (LLMs), researchers have begun to explore utilizing LLMs for generating RTL code. However, current studies primarily focus on generating simple single modules, which can not meet the demands in real world. In fact, due to challenges in managing long-context RTL code and complex cross-file dependencies, existing solutions cannot handle large-scale Verilog repositories in practical hardware development. As the first endeavor to exclusively adapt LLMs for large-scale RTL development, we propose RTLRepoCoder, a groundbreaking solution that incorporates specific fine-tuning and Retrieval-Augmented Generation (RAG) for repository-level Verilog code completion. Open-source Verilog repositories from the real world, along with an extended context size, are used for domain-specific fine-tuning. The optimized RAG system improves the information density of the input context by retrieving relevant code snippets. Tailored optimizations for RAG are carried out, including the embedding model, the cross-file context splitting strategy, and the chunk size. Our solution achieves state-of-the-art performance on public benchmark, significantly surpassing GPT-4 and advanced domain-specific LLMs on Edit Similarity and Exact Match rate. Comprehensive experiments demonstrate the remarkable effectiveness of our approach and offer insights for future work.

Large language models (LLMs) are increasingly being explored for automating SystemVerilog Assertion (SVA) generation, yet most evaluations report correctness on a single syntactic representation of an input. Such point accuracy does not reveal whether a model's correct output is stable when the same RTL behavior is written differently. This paper presents a controlled metamorphic evaluation of LLM-based SVA generation under semantics-preserving RTL transformations. Starting from the VERT dataset, we construct a quality-filtered conditional-control pool and a stratified 40-program evaluation set containing 295 assignment behaviors. We evaluate two open code models, Qwen2.5-Coder-7B and DeepSeek-Coder-V2-Lite, with an identical evaluation prompt and greedy decoding. Three transformations are studied: operand reordering, deterministic identifier renaming, and redundant parenthesization. Beyond baseline and transformed accuracy, we measure conditional robustness, invariance failure, and any-flip rate, with 10,000-sample clustered bootstrap intervals at the RTL-program level. Across all six model-transformation conditions, 9.7%-27.0% of behaviors that were correct on the original RTL become incorrect after a semantics-preserving transformation. Aggregate accuracy can therefore hide substantial instability: under identifier renaming, DeepSeek-Coder-V2-Lite improves from 53.9% to 63.7% accuracy while 19.5% of its originally correct behaviors fail. Manual review of 30 sampled correct-to-wrong transitions identifies dropped path predicates, branch-polarity errors, Boolean-structure corruption, and output-contract violations. The results show that point accuracy alone is insufficient for characterizing LLM reliability in assertion generation and motivate robustness-aware evaluation for AI-assisted hardware verification.

Instruction tuning has emerged as the key in aligning large language models (LLMs) with specific task instructions, thereby mitigating the discrepancy between the next-token prediction objective and users' actual goals. To reduce the labor and time cost to collect or annotate data by humans, researchers start to explore the use of LLMs to generate instruction-aligned synthetic data. Recent works focus on generating diverse instructions and applying LLM to increase instruction complexity, often neglecting downstream use cases. It remains unclear how to tailor high-quality data to elicit better instruction-following abilities in different target instruction distributions and LLMs. To this end, we introduce CodecLM, a general framework for adaptively generating high-quality synthetic data for LLM alignment with different downstream instruction distributions and LLMs. Drawing on the Encode-Decode principles, we use LLMs as codecs to guide the data generation process. We first encode seed instructions into metadata, which are concise keywords generated on-the-fly to capture the target instruction distribution, and then decode metadata to create tailored instructions. We also introduce Self-Rubrics and Contrastive Filtering during decoding to tailor data-efficient samples. Extensive experiments on four open-domain instruction following benchmarks validate the effectiveness of CodecLM over the current state-of-the-arts.

Query rewriting is a classical technique for transforming complex declarative SQL queries into ``lean'' equivalents that are conducive to (a) faster execution from a performance perspective, and (b) better understanding from a developer perspective. The rewriting is typically achieved via transformation rules, but these rules are limited in scope and difficult to update in a production system. In recent times, LLM-based techniques have also been mooted, but they are prone to both semantic and syntactic errors. We investigate here, how the remarkable cognitive capabilities of LLMs can be leveraged for performant query rewriting while incorporating safeguards and optimizations to ensure correctness and efficiency. Our study shows that these goals can be progressively achieved through incorporation of (a) an ensemble suite of basic prompts, (b) database-sensitive prompts via redundancy removal and selectivity-based rewriting rules, and (c) LLM token probability-guided rewrite paths. Further, a suite of statistical and logic-based tools can be used to guard against errors produced by the model. We have implemented the above LLM-infused techniques in the LITHE system, and evaluated complex analytic queries from multiple benchmarks on contemporary database platforms. The results show significant improvements over SOTA rewriting techniques -- for instance, on TPC-DS, LITHE constructed productive (>1.5x speedup) rewrites for two-thirds of the query suite, delivering four times more coverage than SOTA. Further, the geometric mean of its estimated execution speedups was an order-of-magnitude jump over SOTA performance. In essence, LITHE offers a potent and robust LLM-based intermediary between enterprise applications and database engines.

Existing Programming-By-Example (PBE) systems often rely on simplified benchmarks that fail to capture the high structural complexity of real-world regexes, such as deeper nesting and frequent use of union operations. To overcome the resulting performance drop, we propose ReSyn, a synthesizer-agnostic divide-and-conquer framework that decomposes complex synthesis problem into manageable sub-problems. We also introduce Set2Regex, a parameter-efficient synthesizer capturing the permutation invariance of examples. Experimental results demonstrate that ReSyn significantly boosts accuracy across various synthesizers, and its combination with Set2Regex establishes a new state-of-the-art on challenging real-world benchmark. The complete source code, datasets, and pre-trained model checkpoints are publicly available at https://github.com/mrseongminkim/ReSyn.

Speculative decoding mitigates the latency of sequential generation in autoregressive Large Language Models (LLMs) by interleaving draft generation with target verification. However, existing parallel drafting backends often suffer from rapid accuracy degradation over long horizons, leading to high rejection rates during verification and suboptimal wall-clock speedups. We observe that drafting errors are not uniformly distributed but typically stem from localized high-uncertainty tokens that destabilize downstream generation trajectories. Motivated by this token error pattern, we propose CURE, a budget-aware dynamic repair tree designed to repair errors at uncertainty focal points without incurring prohibitive tree-verification overheads. Specifically, our method uses predictive confidence margins to dynamically locate candidate error tokens within a block-parallel draft, expands bounded repair paths only at these fragile nodes, and employs a novel repair resynchronization mechanism to realign draft states post-verification. Evaluations on code-generation benchmarks (HumanEval, MBPP, and LiveCodeBench-lite) and mathematical reasoning benchmark (GSM8K) demonstrate that CURE increases the average accepted length by 4.2-7.5% over parallel baselines without repair, translating to an end-to-end speedup of 2.66-3.49times over target-only decoding. Furthermore, we provide a plug-and-play repair module compatible with standard parallel drafting frameworks. We also characterize the trade-off between draft compute and verification efficiency.

Translating sequential programming priors into the parallel temporal logic of hardware design remains a crucial bottleneck for large language models(LLM). To investigate this, we introduce a new error taxonomy grounded in problem solvability, inspired by cognitive theory. Our taxonomy categorizes failures into syntactic, semantic, solvable functional, and unsolvable functional types. Evaluations reveal a strict empirical ceiling on the VerilogEval benchmark, as frontier models plateau at a 90.8% initial pass rate. These plateaus are defined by unsolvable functional errors, exposing persistent knowledge gaps immune to test time compute scaling. Furthermore, we expose a striking surface convergence gap: optimization readily eliminates syntax errors but concurrently exacerbates deeper functional failures. Our findings demonstrate that alignment techniques merely teach models to compile. While repeated sampling strategies can patch solvable errors, register-transfer level(RTL) coding capacity remains strictly bounded by pretraining knowledge. Addressing challenges in the current LLM based hardware generation pipeline requires more studies in model reasoning rather than alignment interventions.

Large Language Models (LLMs) have demonstrated impressive capabilities for text rewriting. Nonetheless, the large sizes of these models make them impractical for on-device inference, which would otherwise allow for enhanced privacy and economical inference. Creating a smaller yet potent language model for text rewriting presents a formidable challenge because it requires balancing the need for a small size with the need to retain the emergent capabilities of the LLM, that requires costly data collection. To address the above challenge, we introduce a new instruction tuning approach for building a mobile-centric text rewriting model. Our strategies enable the generation of high quality training data without any human labeling. In addition, we propose a heuristic reinforcement learning framework which substantially enhances performance without requiring preference data. To further bridge the performance gap with the larger server-side model, we propose an effective approach that combines the mobile rewrite agent with the server model using a cascade. To tailor the text rewriting tasks to mobile scenarios, we introduce MessageRewriteEval, a benchmark that focuses on text rewriting for messages through natural language instructions. Through empirical experiments, we demonstrate that our on-device model surpasses the current state-of-the-art LLMs in text rewriting while maintaining a significantly reduced model size. Notably, we show that our proposed cascading approach improves model performance.

Existing large language models (LLMs) for register transfer level code generation face challenges like compilation failures and suboptimal power, performance, and area (PPA) efficiency. This is due to the lack of PPA awareness in conventional transformer decoding algorithms. In response, we present an automated transformer decoding algorithm that integrates Monte Carlo tree-search for lookahead, guiding the transformer to produce compilable, functionally correct, and PPA-optimized code. Empirical evaluation with a fine-tuned language model on RTL codesets shows that our proposed technique consistently generates functionally correct code compared to prompting-only methods and effectively addresses the PPA-unawareness drawback of naive large language models. For the largest design generated by the state-of-the-art LLM (16-bit adder), our technique can achieve a 31.8% improvement in the area-delay product.

Following natural instructions is crucial for the effective application of Retrieval-Augmented Generation (RAG) systems. Despite recent advancements in Large Language Models (LLMs), research on assessing and improving instruction-following (IF) alignment within the RAG domain remains limited. To address this issue, we propose VIF-RAG, the first automated, scalable, and verifiable synthetic pipeline for instruction-following alignment in RAG systems. We start by manually crafting a minimal set of atomic instructions (<100) and developing combination rules to synthesize and verify complex instructions for a seed set. We then use supervised models for instruction rewriting while simultaneously generating code to automate the verification of instruction quality via a Python executor. Finally, we integrate these instructions with extensive RAG and general data samples, scaling up to a high-quality VIF-RAG-QA dataset (>100k) through automated processes. To further bridge the gap in instruction-following auto-evaluation for RAG systems, we introduce FollowRAG Benchmark, which includes approximately 3K test samples, covering 22 categories of general instruction constraints and four knowledge-intensive QA datasets. Due to its robust pipeline design, FollowRAG can seamlessly integrate with different RAG benchmarks. Using FollowRAG and eight widely-used IF and foundational abilities benchmarks for LLMs, we demonstrate that VIF-RAG markedly enhances LLM performance across a broad range of general instruction constraints while effectively leveraging its capabilities in RAG scenarios. Further analysis offers practical insights for achieving IF alignment in RAG systems. Our code and datasets are released at https://FollowRAG.github.io.

Large Language Models (LLMs) have shown strong potential in accelerating digital hardware design through automated code generation. Yet, ensuring their reliability remains a critical challenge, as existing LLMs trained on massive heterogeneous datasets often exhibit problematic memorization of proprietary intellectual property (IP), contaminated benchmarks, and unsafe coding patterns. To mitigate these risks, we propose a novel unlearning framework tailored for LLM-based hardware code generation. Our method combines (i) a syntax-preserving unlearning strategy that safeguards the structural integrity of hardware code during forgetting, and (ii) a fine-grained floor-aware selective loss that enables precise and efficient removal of problematic knowledge. This integration achieves effective unlearning without degrading LLM code generation capabilities. Extensive experiments show that our framework supports forget sets up to 3x larger, typically requiring only a single training epoch, while preserving both syntactic correctness and functional integrity of register-transfer level (RTL) codes. Our work paves an avenue towards reliable LLM-assisted hardware design.

Masked diffusion language models (dLLMs) generate text by iteratively denoising masked tokens with bidirectional attention. Extending reasoning across generation chunks normally requires keeping earlier generated text in context. We ask whether a dLLM can instead continue reasoning after that text is cleared, using only a fixed-size carried state. We implement this state as a small number of register tokens: dedicated fixed-position tokens whose continuous hidden states are trained to carry reasoning progress across generation chunks. We post-train dLLMs to decode a chunk of text, clear it while preserving the register values, and continue decoding from the prompt and carried state. In our main comparisons on LLaDA and Dream, registers outperform discrete-text carry on every benchmark, with gains of up to 8.5 points on math and 19.5 points on code. Registers are especially effective for bounded code generation, where correct programs usually span several chunks. Finally, registers can be further refined with reinforcement learning on long-horizon reasoning tasks.

Query rewrite, which aims to generate more efficient queries by altering a SQL query's structure without changing the query result, has been an important research problem. In order to maintain equivalence between the rewritten query and the original one during rewriting, traditional query rewrite methods always rewrite the queries following certain rewrite rules. However, some problems still remain. Firstly, existing methods of finding the optimal choice or sequence of rewrite rules are still limited and the process always costs a lot of resources. Methods involving discovering new rewrite rules typically require complicated proofs of structural logic or extensive user interactions. Secondly, current query rewrite methods usually rely highly on DBMS cost estimators which are often not accurate. In this paper, we address these problems by proposing a novel method of query rewrite named LLM-R2, adopting a large language model (LLM) to propose possible rewrite rules for a database rewrite system. To further improve the inference ability of LLM in recommending rewrite rules, we train a contrastive model by curriculum to learn query representations and select effective query demonstrations for the LLM. Experimental results have shown that our method can significantly improve the query execution efficiency and outperform the baseline methods. In addition, our method enjoys high robustness across different datasets.

Instruction tuning is crucial for optimizing Large Language Models (LLMs), yet mainstream data selection methods heavily rely on LLMs as instruction quality scorers, leading to high computational costs and reduced data diversity. To address these limitations, we propose MergeIT, a novel LLM-based Merging strategy for better Instruction Tuning that shifts the focus from selection to synthesis. MergeIT operates in two stages: first, topic-aware filtering clusters and refines the dataset, preserving diversity while eliminating redundancy without relying on LLM-based scoring. Second, LLM-based merging synthesizes semantically similar instructions into more informative and compact training data, enhancing data richness while further reducing dataset size. Experimental results demonstrate that MergeIT enables efficient, diverse, and scalable instruction selection and synthesis, establishing LLM-based merging as a promising alternative to conventional scoring-based selection methods for instruction tuning. Our source code and datasets are now available at https://github.com/XcloudFance/MergeIT

Large Language Models (LLMs) are increasingly deployed in agentic systems that interact with an external environment; this makes them susceptible to prompt injections when dealing with untrusted data. To overcome this limitation, we propose SIC (Soft Instruction Control)-a simple yet effective iterative prompt sanitization loop designed for tool-augmented LLM agents. Our method repeatedly inspects incoming data for instructions that could compromise agent behavior. If such content is found, the malicious content is rewritten, masked, or removed, and the result is re-evaluated. The process continues until the input is clean or a maximum iteration limit is reached; if imperative instruction-like content remains, the agent halts to ensure security. By allowing multiple passes, our approach acknowledges that individual rewrites may fail but enables the system to catch and correct missed injections in later steps. Although immediately useful, worst-case analysis shows that SIC is not infallible; strong adversary can still get a 15% ASR by embedding non-imperative workflows. This nonetheless raises the bar.

Large Language Models (LLMs) have demonstrated impressive zero-shot capabilities in long-form text generation tasks expressed through natural language instructions. However, user expectations for long-form text rewriting is high, and unintended rewrites (''hallucinations'') produced by the model can negatively impact its overall performance. Existing evaluation benchmarks primarily focus on limited rewriting styles and sentence-level rewriting rather than long-form open-ended rewriting.We introduce OpenRewriteEval, a novel benchmark that covers a wide variety of rewriting types expressed through natural language instructions. It is specifically designed to facilitate the evaluation of open-ended rewriting of long-form texts. In addition, we propose a strong baseline model, RewriteLM, an instruction-tuned large language model for long-form text rewriting. We develop new strategies that facilitate the generation of diverse instructions and preference data with minimal human intervention. We conduct empirical experiments and demonstrate that our model outperforms the current state-of-the-art LLMs in text rewriting. Specifically, it excels in preserving the essential content and meaning of the source text, minimizing the generation of ''hallucinated'' content, while showcasing the ability to generate rewrites with diverse wording and structures.

Tools for rewriting, refactoring and optimizing code should be fast and correct. Large language models (LLMs), by their nature, possess neither of these qualities. Yet, there remains tremendous opportunity in using LLMs to improve code. We explore the use of LLMs not to transform code, but to code transforms. We propose a chain-of-thought approach to synthesizing code transformations from a small number of input/output code examples that incorporates execution and feedback. Unlike the direct rewrite approach, LLM-generated transformations are easy to inspect, debug, and validate. The logic of the rewrite is explicitly coded and easy to adapt. The compute required to run code transformations is minute compared to that of LLM rewriting. We test our approach on 16 Python code transformations and find that LLM- generated transforms are perfectly precise for 7 of them and less imprecise than direct LLM rewriting on the others. We hope to encourage further research to improving the precision of LLM code rewriting.

Safety alignment in Large Language Models (LLMs) often involves mediating internal representations to refuse harmful requests. Recent research has demonstrated that these safety mechanisms can be bypassed by ablating or removing specific representational directions within the model. In this paper, we propose the opposite approach: Rank-One Safety Injection (ROSI), a white-box method that amplifies a model's safety alignment by permanently steering its activations toward the refusal-mediating subspace. ROSI operates as a simple, fine-tuning-free rank-one weight modification applied to all residual stream write matrices. The required safety direction can be computed from a small set of harmful and harmless instruction pairs. We show that ROSI consistently increases safety refusal rates - as evaluated by Llama Guard 3 - while preserving the utility of the model on standard benchmarks such as MMLU, HellaSwag, and Arc. Furthermore, we show that ROSI can also re-align 'uncensored' models by amplifying their own latent safety directions, demonstrating its utility as an effective last-mile safety procedure. Our results suggest that targeted, interpretable weight steering is a cheap and potent mechanism to improve LLM safety, complementing more resource-intensive fine-tuning paradigms.

The performance of large language models (LLMs) in program synthesis and mathematical reasoning is fundamentally limited by the quality of their pre-training corpora. We introduce two openly licensed datasets, released under the Llama 3.3 Community License, that significantly enhance LLM performance by systematically rewriting public data. SwallowCode (approximately 16.1 billion tokens) refines Python snippets from The-Stack-v2 through a novel four-stage pipeline: syntax validation, pylint-based style filtering, and a two-stage LLM rewriting process that enforces style conformity and transforms snippets into self-contained, algorithmically efficient examples. Unlike prior methods that rely on exclusionary filtering or limited transformations, our transform-and-retain approach upgrades low-quality code, maximizing data utility. SwallowMath (approximately 2.3 billion tokens) enhances Finemath-4+ by removing boilerplate, restoring context, and reformatting solutions into concise, step-by-step explanations. Within a fixed 50 billion token training budget, continual pre-training of Llama-3.1-8B with SwallowCode boosts pass@1 by +17.0 on HumanEval and +17.7 on HumanEval+ compared to Stack-Edu, surpassing the baseline model's code generation capabilities. Similarly, substituting SwallowMath yields +12.4 accuracy on GSM8K and +7.6 on MATH. Ablation studies confirm that each pipeline stage contributes incrementally, with rewriting delivering the largest gains. All datasets, prompts, and checkpoints are publicly available, enabling reproducible research and advancing LLM pre-training for specialized domains.

Parallel diffusion decoding can accelerate diffusion language model inference by unmasking multiple tokens per step, but aggressive parallelism often harms quality. Revocable decoding mitigates this by rechecking earlier tokens, yet we observe that existing verification schemes frequently trigger flip-flop oscillations, where tokens are remasked and later restored unchanged. This behaviour slows inference in two ways: remasking verified positions weakens the conditioning context for parallel drafting, and repeated remask cycles consume the revision budget with little net progress. We propose COVER (Cache Override Verification for Efficient Revision), which performs leave-one-out verification and stable drafting within a single forward pass. COVER constructs two attention views via KV cache override: selected seeds are masked for verification, while their cached key value states are injected for all other queries to preserve contextual information, with a closed form diagonal correction preventing self leakage at the seed positions. COVER further prioritises seeds using a stability aware score that balances uncertainty, downstream influence, and cache drift, and it adapts the number of verified seeds per step. Across benchmarks, COVER markedly reduces unnecessary revisions and yields faster decoding while preserving output quality.

Automated Verilog code synthesis poses significant challenges and typically demands expert oversight. Traditional high-level synthesis (HLS) methods often fail to scale for real-world designs. While large language models (LLMs) have enhanced scalability, they often introduce syntactical and logical errors requiring extensive post-generation verification. Here, we introduce a novel conjunctive normal form (CNF)-guided synthesis methodology. The idea is to have an LLM generate CNF clauses, a format widely used for formal verification and synthesis validation in hardware design, but here it is used to formally describe the desired circuit functionality. These CNF specifications are then deterministically converted into Verilog, ensuring correctness by construction. Our approach fine-tunes an open-source and lightweight LLM, namely the CPU-deployable LLama-3.2-3B-Instruct model (parameters < 4B), on a dataset of standard RTL components. Experimental results demonstrate that our approach reliably produces functionally correct Verilog code on the first attempt, compared to other lightweight open-source SoTA works such as Verigen (2B parameters) and RTLCoder (4-bit quantized with around 7B parameters). We will release our method and data in full post peer-review.

Large Language Models (LLMs) are computational models capable of performing complex natural language processing tasks. Leveraging these capabilities, LLMs hold the potential to transform the entire hardware design stack, with predictions suggesting that front-end and back-end tasks could be fully automated in the near future. Currently, LLMs show great promise in streamlining Register Transfer Level (RTL) generation, enhancing efficiency, and accelerating innovation. However, their probabilistic nature makes them prone to inaccuracies - a significant drawback in RTL design, where reliability and precision are essential. To address these challenges, this paper introduces AIvril, an advanced framework designed to enhance the accuracy and reliability of RTL-aware LLMs. AIvril employs a multi-agent, LLM-agnostic system for automatic syntax correction and functional verification, significantly reducing - and in many cases, completely eliminating - instances of erroneous code generation. Experimental results conducted on the VerilogEval-Human dataset show that our framework improves code quality by nearly 2x when compared to previous works, while achieving an 88.46% success rate in meeting verification objectives. This represents a critical step toward automating and optimizing hardware design workflows, offering a more dependable methodology for AI-driven RTL design.

Recently, an increasing number of AI-driven programming assistants powered by code LLMs have been integrated into various real-world software development environments, significantly boosting developer productivity. However, existing code generation benchmarks primarily focus on general-purpose scenarios, leaving the code generation performance of LLMs for specific application domains largely unknown. In this paper, we introduce a new benchmark, MultiCodeBench, to fill this gap. MultiCodeBench comprises 2,400 programming tasks, covering 12 popular software development domains and 15 programming languages. Specifically, we perform in-depth research to identify these 12 application domains. Given that each domain may involve multiple technical frameworks, and that different frameworks present distinct challenges in the coding process, we categorize the commonly used frameworks and platforms within each domain. We then sample programming problems from GitHub repositories related to these subdomains. To ensure the quality of the tasks and mitigate data leakage issues, we invite annotators to rewrite the docstrings for each task in MultiCodeBench. Additionally, we build a static analysis-based dependency parsing tool to extract the dependencies in the ground truth for each task, enabling deeper performance analysis. Through extensive experiments on MultiCodeBench with eleven representative mainstream LLMs, we reveal the code generation performance of the LLMs across different application domains, providing practical insights for developers in downstream fields when selecting LLMs. Furthermore, we analyze the reasons behind the models' failures in completing software application development tasks, offering guidance for model developers to enhance domain-specific code generation capabilities.

Large language models (LLMs) have demonstrated significant potential in formal theorem proving, yet state-of-the-art performance often necessitates prohibitive test-time compute via massive roll-outs or extended context windows. In this work, we address this scalability bottleneck by exploiting an informative structure in formal verification: the observation that compilers map a vast space of diverse proof attempts to a compact set of structured failure modes. We introduce a learning-to-refine framework that leverages this compression to perform efficient learning and proof exploration. We perform tree search that corrects errors locally conditioned on explicit verifier feedback, thereby circumventing the costs associated with accumulating a long history of proof attempts. Extensive evaluations show that our method consistently amplifies the reasoning capabilities of base provers across varying scales. Notably, our approach achieves state-of-the-art performance on PutnamBench among publicly reported sim8B and sim32B parameter models under comparable test-time budgets, offering a scalable paradigm for next-generation verifier-guided reasoning.

A popular way to improve Retrieval-Augmented Generation (RAG) is to rewrite the user's question into several variants and search with all of them. We test whether this actually helps once the underlying search is already strong. Under one fixed, competitive pipeline (BGE dense retrieval, cross-encoder reranking, and MMR diversification), we compare four query-rewriting strategies (S1-S4) against two strong LLM baselines (HyDE, Query2Doc) on three datasets (HotpotQA, AmbigNQ, and the 512K-document EnterpriseRAG-Bench) over three seeds with paired-bootstrap significance tests. Our headline result is that rewriting alone is at best competitive with a strong baseline, but combining methods yields outsized gains because different strategies fail on different questions. A post-hoc union of four methods (S1+S3+S4+HyDE) improves HIT@10 over the baseline by +12.5 points on enterprise data (51.70 vs 39.22), and a five-method union reaches 52.98 (+13.8). Budget-matched controls capture only ~40% of this gain, confirming that complementarity, not retrieval budget, is the primary driver. On HotpotQA the union adds +1.6 to +1.8 points (p<0.001), saturating the all-method oracle; on AmbigNQ the same fusion hurts (-2.4 below the best solo, p<0.001), and we analyze when and why. Because rewriting is expensive, we evaluate in simulation a confidence-gated router that runs rewriting only when the baseline's own top-1 score is low. It captures about half of the enterprise full-merge gain (+4.3 HIT@10) while paying rewriting cost on <40% of queries, and automatically declines to rewrite on AmbigNQ. A downstream answer-quality evaluation confirms the router improves F1 by +1.92 (p<0.01) at roughly 40% of the expansion cost. In short: treat query rewriting as a complementary coverage source, applied through cost-aware routing, not as a standalone replacement for a strong baseline.

Pretraining data processing is critical to the downstream performance of Large Language Models (LLMs). However, many existing approaches define a fixed processing strategy at the corpus or domain level and apply it uniformly to many examples, without adapting to the needs of each example. We propose DataOrchestra, a framework that unifies different processing operations and orchestrates an example-specific pipeline for each example. Given a chunk of pretraining data, an orchestrator decides whether to drop, untouch, or clean it. For a chunk to be cleaned, it selects one or more downstream operations, ranging from programmatic editing to different forms of LLM-based rewriting. For each rewriting step, it further generates a concrete instruction, which is executed by the corresponding downstream tool model. We pretrain models from 0.5B to 7B from scratch on web data processed by DataOrchestra and observe stable average gains over individual data-processing methods across 11 benchmarks. DataOrchestra is also effective for math continued pretraining and outperforms stronger processing baselines, while reducing processing compute by skipping unnecessary downstream operations.

Recent work demonstrates that, after being fine-tuned on a high-quality instruction dataset, the resulting model can obtain impressive capabilities to address a wide range of tasks. However, existing methods for instruction data generation often produce duplicate data and are not controllable enough on data quality. In this paper, we extend the generalization of instruction tuning by classifying the instruction data to 4 code-related tasks and propose a LLM-based Generator-Discriminator data process framework to generate diverse, high-quality instruction data from open source code. Hence, we introduce CodeOcean, a dataset comprising 20,000 instruction instances across 4 universal code-related tasks,which is aimed at augmenting the effectiveness of instruction tuning and improving the generalization ability of fine-tuned model. Subsequently, we present WaveCoder, a fine-tuned Code LLM with Widespread And Versatile Enhanced instruction tuning. This model is specifically designed for enhancing instruction tuning of Code Language Models (LLMs). Our experiments demonstrate that Wavecoder models outperform other open-source models in terms of generalization ability across different code-related tasks at the same level of fine-tuning scale. Moreover, Wavecoder exhibits high efficiency in previous code generation tasks. This paper thus offers a significant contribution to the field of instruction data generation and fine-tuning models, providing new insights and tools for enhancing performance in code-related tasks.

Query rewriting is one of the most effective techniques for coping with poorly written queries before passing them down to the query optimizer. Manual rewriting is not scalable, as it is error-prone and requires deep expertise. Similarly, traditional query rewriting algorithms can only handle a small subset of queries: rule-based techniques do not generalize to new query patterns and synthesis-based techniques cannot handle complex queries. Fortunately, the rise of Large Language Models (LLMs), equipped with broad general knowledge and advanced reasoning capabilities, has created hopes for solving some of these previously open problems. In this paper, we present GenRewrite, the first holistic system that leverages LLMs for query rewriting. We introduce the notion of Natural Language Rewrite Rules (NLR2s), and use them as hints to the LLM but also a means for transferring knowledge from rewriting one query to another, and thus becoming smarter and more effective over time. We present a novel counterexample-guided technique that iteratively corrects the syntactic and semantic errors in the rewritten query, significantly reducing the LLM costs and the manual effort required for verification. GenRewrite speeds up 22 out of 99 TPC queries (the most complex public benchmark) by more than 2x, which is 2.5x--3.2x higher coverage than state-of-the-art traditional query rewriting and 2.1x higher than the out-of-the-box LLM baseline.

Large language models (LLMs) have facilitated impressive progress in software engineering, code generation, tooling, and systems. Concurrently, a significant body of research has developed which explores a growing variety of methods and systems for applying LLMs to hardware and chip design (e.g., systems for RTL code generation based on functional description). However, when it comes to open Verilog/RTL code-generation, we need high-quality training samples to build specialized and more effective LLM systems through fine-tuning or low-rank adaptation. Here, we propose a ``judge-renew-check-renew-check'' (JRCRC) pipeline which updates a current public dataset using a hierarchy of state-of-the-art commercial LLM models differing in their costs and capabilities in RTL code generation. This approach achieves a cost-effective mechanism for filtering and refining code-generation samples into a higher-quality training dataset. Our experiments also identify some common weaknesses of LLMs in rule-based reasoning and logic, and consequently, in RTL code-generation. Having identified these weaknesses, we develop an architecture for incorporating pre-processing tools to dynamically assist the LLMs in inferring logical relationships from tabular data formats. With our tools-assisted architecture for RTL code generation, we achieve significant overall performance gains in the VerilogEval benchmark and outperform many state-of-the-art methods. Our LLM4RTL system achieves performance comparable to that of GPT-4O using a significantly much smaller LLM.

Recently, there has been a surging interest in using large language models (LLMs) for Verilog code generation. However, the existing approaches are limited in terms of the quality of the generated Verilog code. To address such limitations, this paper introduces an innovative multi-expert LLM architecture for Verilog code generation (MEV-LLM). Our architecture uniquely integrates multiple LLMs, each specifically fine-tuned with a dataset that is categorized with respect to a distinct level of design complexity. It allows more targeted learning, directly addressing the nuances of generating Verilog code for each category. Empirical evidence from experiments highlights notable improvements in terms of the percentage of generated Verilog outputs that are syntactically and functionally correct. These findings underscore the efficacy of our approach, promising a forward leap in the field of automated hardware design through machine learning.

Modern instruction-tuned large language models (LLMs) have made remarkable progress in code generation. However, these LLMs fine-tuned with standard supervised fine-tuning (SFT) sometimes generate plausible-looking but functionally incorrect code variants. This issue likely stems from the limitation of standard SFT, which treats all tokens equally during optimization and fails to emphasize the error-sensitive segments-specific code differences between correct implementations and similar incorrect variants. To address this problem, we propose Fault-Aware Fine-Tuning (FAIT), a novel fine-tuning technique that enhances LLMs' code generation by (1) extracting multi-granularity (line/token-level) differences between correct and incorrect yet similar implementations to identify error-sensitive segments, and (2) dynamically prioritizing those segments during training via dynamic loss weighting. Through extensive experiments on seven LLMs across three widely-used benchmarks, our method achieves an average relative improvement of 6.9% on pass@1 with just one epoch of training, with some enhanced 6.7B LLMs outperforming closed-source models, e.g., GPT-3.5-Turbo. Furthermore, our fine-tuning technique demonstrates strong generalization with performance improvements ranging from 3.8% to 19.1% across diverse instruction-tuned LLMs, and our ablation studies confirm the contributions of different granularities of differences and loss function components.

Recent advancements in open-source code large language models (LLMs) have demonstrated remarkable coding abilities by fine-tuning on the data generated from powerful closed-source LLMs such as GPT-3.5 and GPT-4 for instruction tuning. This paper explores how to further improve an instruction-tuned code LLM by generating data from itself rather than querying closed-source LLMs. Our key observation is the misalignment between the translation of formal and informal languages: translating formal language (i.e., code) to informal language (i.e., natural language) is more straightforward than the reverse. Based on this observation, we propose INVERSE-INSTRUCT, which summarizes instructions from code snippets instead of the reverse. Specifically, given an instruction tuning corpus for code and the resulting instruction-tuned code LLM, we ask the code LLM to generate additional high-quality instructions for the original corpus through code summarization and self-evaluation. Then, we fine-tune the base LLM on the combination of the original corpus and the self-generated one, which yields a stronger instruction-tuned LLM. We present a series of code LLMs named InverseCoder, which surpasses the performance of the original code LLMs on a wide range of benchmarks, including Python text-to-code generation, multilingual coding, and data-science code generation.

As hardware design complexity escalates, there is an urgent need for advanced automation in electronic design automation (EDA). Traditional register transfer level (RTL) design methods are manual, time-consuming, and prone to errors. While commercial (instruction-tuned) large language models (LLMs) shows promising performance for automation, they pose security and privacy concerns. Open-source models offer alternatives; however, they frequently fall short in quality/correctness, largely due to limited, high-quality RTL code data essential for effective training and generalization. This paper proposes RTL++, a first-of-its-kind LLM-assisted method for RTL code generation that utilizes graph representations of code structures to enhance the quality of generated code. By encoding RTL code into a textualized control flowgraphs (CFG) and data flow graphs (DFG), RTL++ captures the inherent hierarchy, dependencies, and relationships within the code. This structured graph-based approach enhances the context available to LLMs, enabling them to better understand and generate instructions. By focusing on data generation through graph representations, RTL++ addresses the limitations of previous approaches that rely solely on code and suffer from lack of diversity. Experimental results demonstrate that RTL++ outperforms state-of-the-art models fine-tuned for RTL generation, as evaluated using the VerilogEval benchmark's Pass@1/5/10 metric, as well as the RTLLM1.1 model, which highlight the effectiveness of graph-enhanced context in advancing the capabilities of LLM-assisted RTL code generation.

Recurrent delta-rule models keep a fixed-size state matrix S (d_v x d_k) that compresses all past context. The state of the art (GDN-2) gates this update with element-wise matrix erase/write masks. This is powerful but has two defects. First, both gates are computed from the incoming token alone, making the model memory-blind: it decides what to erase without seeing what it has stored. Second, value-axis coupling in the erase gate blocks the WY-form triangular chunk solver that drives efficient training -- the intra-chunk system splits into d_v independent solves, collapsing throughput to serial-recurrence cost. We introduce CARVE (Content-Aware Recurrent with Value Efficiency), which fixes both and, via a single-launch "megakernel" scheduling of the same WY-form math, trains faster than the matrix-gated baseline it replaces. The key idea is architectural: restricting all gating to the key axis makes the intra-chunk coupling independent of the value index, restoring one unmodified WY-form solve. Within this constraint, CARVE conditions both gates on a content signal read once per chunk from the chunk-boundary state and folded algebraically into each gate's low-rank projection (by associativity, U(Sq)=(US)q), giving memory-aware gating at negligible extra traffic. At init the content projections are zero, so CARVE is bit-identical to the baseline; we prove the one-chunk staleness perturbs gates by only O(1/sqrt(L)), matching a measured 0.18% deviation flat up to L=128. At 1.3B parameters / 100B FineWeb-Edu tokens on H100 (three seeds), CARVE improves every axis: WikiText perplexity 15.72 vs 15.90 (hybrid 15.41 vs 15.62), +0.63 pp average common-sense accuracy, and state-of-the-art RULER and real-world recall -- while training +1.4% faster at matched depth and +19.3% at iso-quality depth, at +13% peak memory. Backed by six formal guarantees.

Instruction tuning is a supervised fine-tuning approach that significantly improves the ability of large language models (LLMs) to follow human instructions. We propose SelfCodeAlign, the first fully transparent and permissive pipeline for self-aligning code LLMs without extensive human annotations or distillation. SelfCodeAlign employs the same base model for inference throughout the data generation process. It first extracts diverse coding concepts from high-quality seed snippets to generate new tasks. It then samples multiple responses per task, pairs each with test cases, and validates them in a sandbox environment. Finally, passing examples are selected for instruction tuning. In our primary experiments, we use SelfCodeAlign with CodeQwen1.5-7B to generate a dataset of 74k instruction-response pairs. Finetuning on this dataset leads to a model that achieves a 67.1 pass@1 on HumanEval+, surpassing CodeLlama-70B-Instruct despite being ten times smaller. Across all benchmarks, this finetuned model consistently outperforms the original version trained with OctoPack, the previous state-of-the-art method for instruction tuning without human annotations or distillation. Additionally, we show that SelfCodeAlign is effective across LLMs of various sizes, from 3B to 33B, and that the base models can benefit more from alignment with their own data distribution. We further validate each component's effectiveness in our pipeline, showing that SelfCodeAlign outperforms both direct distillation from GPT-4o and leading GPT-3.5-based distillation methods, such as OSS-Instruct and Evol-Instruct. SelfCodeAlign has also led to the creation of StarCoder2-Instruct, the first fully transparent, permissively licensed, and self-aligned code LLM that achieves state-of-the-art coding performance.

In this work, we investigate a typical scenario in code generation where a developer edits existing code in real time and requests a code assistant, e.g., a large language model, to re-predict the next token or next line on the fly. Naively, the LLM needs to re-encode the entire KV cache to provide an accurate prediction. However, this process is computationally expensive, especially when the sequence length is long. Simply encoding the edited subsequence and integrating it to the original KV cache meets the temporal confusion problem, leading to significantly worse performance. We address this efficiency and accuracy trade-off by introducing \textbf{Positional \textbf{Integrity Encoding} (PIE). Building upon the rotary positional encoding, PIE first removes the rotary matrices in the Key cache that introduce temporal confusion and then reapplies the correct rotary matrices. This process ensures that positional relationships between tokens are correct and requires only a single round of matrix multiplication. We validate the effectiveness of PIE through extensive experiments on the RepoBench-C-8k dataset, utilizing DeepSeek-Coder models with 1.3B, 6.7B, and 33B parameters. Our evaluation includes three real-world coding tasks: code insertion, code deletion, and multi-place code editing. Results demonstrate that PIE reduces computational overhead by over 85% compared to the standard full recomputation approach across all model sizes and tasks while well approximating the model performance.

With the rapid advancement of Large Language Models (LLMs), the demand for robust instruction-following capabilities in code generation tasks has grown significantly. Code generation not only facilitates faster prototyping and automated testing, but also augments developer efficiency through improved maintainability and reusability of code. In this paper, we introduce CodeIF, the first benchmark specifically designed to assess the abilities of LLMs to adhere to task-oriented instructions within diverse code generation scenarios. CodeIF encompasses a broad range of tasks, including function synthesis, error debugging, algorithmic refactoring, and code explanation, thereby providing a comprehensive suite to evaluate model performance across varying complexity levels and programming domains. We conduct extensive experiments with LLMs, analyzing their strengths and limitations in meeting the demands of these tasks. The experimental results offer valuable insights into how well current models align with human instructions, as well as the extent to which they can generate consistent, maintainable, and contextually relevant code. Our findings not only underscore the critical role that instruction-following LLMs can play in modern software development, but also illuminate pathways for future research aimed at enhancing their adaptability, reliability, and overall effectiveness in automated code generation.

Large Language Models (LLMs) have rapidly improved in performance across code-related tasks, making their integration into Register Transfer Level (RTL) development increasingly attractive. Mimicking the behavior of inline code assistants, many benchmarks evaluate LLMs' capabilities in code completion, either assessing the generation of entire hardware modules or the completion of a single line within a module. However both of these approaches lack the ability to control the granularity of the code-completion sample size and the syntactic range of completions. To overcome these limitations, we present a framework for language-agnostic rule completion (RuC), a grammar-driven, rule-selectable benchmark generator that automatically produces RTL code-completion tasks from a set of input hardware description sources. RuC uses the target Hardware Description Language (HDL) grammar to mask syntactically defined code regions and prompts a model to regenerate them using the surrounding unmasked code as context, enabling a controlled and scalable evaluation of the domain-specific model's code-understanding capabilities, ranging from assignments to the reconstruction of entire logic blocks. We use RuC to generate two SystemVerilog rule-completion benchmarks from the Tiny Tapeout shuttle TT07 and the CVE2 RISC-V core to demonstrate RuC's applicability to a broad range of designs, and conduct a comparative study of the code completion capabilities of modern open-source LLMs across diverse settings. Results indicate that completion performance strongly depends on the model type, the grammatical structure of the masked region, and the prompting strategy. Specifically, the highest scores are obtained with Fill-in-the-Middle (FIM) prompting. These findings highlight the value of grammar-driven, arbitrarily granular benchmarks for meaningful evaluation of LLM capabilities in RTL development workflows.

Finite-state reasoning, the ability to understand and implement state-dependent behavior, is central to hardware design. In this paper, we present LLM-FSM, a benchmark that evaluates how well large language models (LLMs) can recover finite-state machine (FSM) behavior from natural-language specifications and translate it into correct register transfer-level (RTL) implementations. Unlike prior specification-to-RTL benchmarks that rely on manually constructed examples, LLM-FSM is built through a fully automated pipeline. LLM-FSM first constructs FSM with configurable state counts and constrained transition structures. It then prompts LLMs to express each FSM in a structured YAML format with an application context, and to further convert that YAML into a natural-language (NL) specification. From the same YAML, our pipeline synthesizes the reference RTL and testbench in a correct-by-construction manner. All 1,000 problems are verified using LLM-based and SAT-solver-based checks, with human review on a subset. Our experiments show that even the strongest LLMs exhibit sharply declining accuracy as FSM complexity increases. We further demonstrate that training-time scaling via supervised fine-tuning (SFT) generalizes effectively to out-of-distribution (OOD) tasks, while increasing test-time compute improves reasoning reliability. Finally, LLM-FSM remains extensible by allowing its FSM complexity to scale with future model capabilities.

Recently, the rapid development of large language models (LLMs) has reshaped software engineering by enabling autonomous code agents that plan, execute, and utilize external tools iteratively to tackle complex tasks. Beyond achieving functional correctness, these agents must faithfully follow process instructions and constraints throughout the development lifecycle. However, existing benchmarks typically focus on final functional correctness or confine instruction-following evaluation to single-turn, general chat or simple code generation scenarios, leaving instruction-following in multi-turn agentic coding underexplored. To bridge this gap, we propose MTAC-IFBench, a comprehensive benchmark for this critical capability. It features multi-turn progressive software development instructions with diverse constraints spanning 6 primary and 18 secondary categories. With an average of 7.04 turns and 91.33 constraints per instance, it poses a rigorous challenge to current LLMs. To make the evaluation reliable, we construct a checklist for each constraint and functional requirement, and integrate verification scripts and judge agents to verify each checklist item. MTAC-IFBench identifies significant deficiencies in existing code agents in multi-turn instruction-following, with their performance degrading rapidly as the interaction session grows longer.

Instruction tuning enhances large language models (LLMs) to follow human instructions across diverse tasks, relying on high-quality datasets to guide behavior. However, these datasets, whether manually curated or synthetically generated, are often narrowly focused and misaligned with the broad distributions captured during pre-training, limiting LLM generalization and effective use of pre-trained knowledge. We propose Aligning Instruction Tuning with Pre-training (AITP), a method that bridges this gap by identifying coverage shortfalls in instruction-tuning datasets and rewriting underrepresented pre-training data into high-quality instruction-response pairs. This approach enriches dataset diversity while preserving task-specific objectives. Evaluations on three fully open LLMs across eight benchmarks demonstrate consistent performance improvements with AITP. Ablations highlight the benefits of adaptive data selection, controlled rewriting, and balanced integration, emphasizing the importance of aligning instruction tuning with pre-training distributions to unlock the full potential of LLMs.

Embedding-based code retrieval often suffers when encoders overfit to surface syntax. Prior work mitigates this by using LLMs to rephrase queries and corpora into a normalized style, but leaves two questions open: how much representational shift helps, and when is the per-query LLM call justified? We study a hierarchy of three rewriting strategies: stylistic rephrasing, NL-enriched PseudoCode, and full Natural-Language transcription, under joint query-corpus (QC, online) and corpus-only (C, offline) augmentation, across six CoIR benchmarks, five encoders, and three rewriters spanning independent model families (Qwen, DeepSeek, Mistral). We are the first to evaluate NL-enriched PseudoCode and snippet-level Natural Language as direct retrieval representations, rather than as transient intermediates. Full NL rewriting with QC yields the largest gains (+0.51 absolute NDCG@10 on CT-Contest for MoSE-18), while corpus-only rewriting degrades retrieval in 56 of 90 configurations, about 62%. We introduce two diagnostics, Delta H, token entropy, and Delta s, embedding cosine, and show that Delta H predicts retrieval gain under QC across all three rewriter families: pooled Spearman rho = +0.436, p < 0.001 on DeepSeek+Codestral; rho = +0.593 on Codestral alone; rho = +0.356 on Qwen. This establishes Delta H as a cheap, rewriter-agnostic proxy for deciding when rewriting pays off before running retrieval. Our analysis reframes LLM rewriting as a cost-benefit decision: it is most effective as a remediation layer for lightweight encoders on code-dominant queries, with diminishing returns for strong encoders or NL-heavy queries.

Large language models (LLMs) have recently emerged as a promising approach for automating Verilog code generation; however, existing methods primarily emphasize syntactic correctness and often rely on commercial models or external verification tools, which introduces concerns regarding cost, data privacy, and limited guarantees of functional correctness. This work proposes a unified multi-agent framework for reasoning-oriented training data generation with integrated testbench-driven verification, enabling locally fine-tuned LLMs, SiliconMind-V1, to iteratively generate, test, and debug Register-Transfer Level (RTL) designs through test-time scaling. Experimental results on representative benchmarks (VerilogEval-v2, RTLLM-v2, and CVDP) demonstrate that the proposed approach outperforms the state-of-the-art QiMeng-CodeV-R1 in functional correctness while using fewer training resources.

Large language models (LLMs) have made rapid progress, yet adapting them to downstream scenarios still commonly relies on supervised fine-tuning (SFT). When downstream data exhibit a substantial distribution shift from the model's prior training distribution, SFT can induce catastrophic forgetting. To narrow this gap, data rewriting has been proposed as a data-centric approach that rewrites downstream training data prior to SFT. However, existing methods typically sample rewrites from a prompt-induced conditional distribution, so the resulting targets are not necessarily aligned with the model's natural QA-style generation distribution. Moreover, reliance on fixed templates can lead to diversity collapse. To address these issues, we cast data rewriting as a policy learning problem and learn a rewriting policy that better matches the backbone's QA-style generation distribution while preserving diversity. Since distributional alignment, diversity and task consistency are automatically evaluable but difficult to optimize end-to-end with differentiable objectives, we leverage reinforcement learning to optimize the rewrite distribution under reward feedback and propose an RL-based data-rewriting agent. The agent jointly optimizes QA-style distributional alignment and diversity under a hard task-consistency gate, thereby constructing a higher-quality rewritten dataset for downstream SFT. Extensive experiments show that our method achieves downstream gains comparable to standard SFT while reducing forgetting on non-downstream benchmarks by 12.34% on average. Our code is available at https://anonymous.4open.science/r/Patch-the-Prompt-Gap-4112 .

Large Language Models (LLMs) rely on instruction samples for alignment, but creating these datasets poses challenges, particularly in expert-dependent tasks like coding, which can be cost-prohibitive. One approach to mitigate these challenges is synthesizing data using another LLM. In this paper, we introduce a scalable method for generating synthetic instructions to enhance the code generation capability of LLMs. The proposed algorithm, Genetic-Instruct, mimics evolutionary processes, utilizing self-instruction to create numerous synthetic samples from a limited number of seeds. Genetic-Instruct is designed for efficient scaling of the generation process. Fine-tuning multiple coding LLMs with the synthetic samples demonstrates a significant improvement in their code generation accuracy compared to the baselines.

Revision-capable generation is appealing because it can insert or revise earlier content, but many non-autoregressive and edit-based approaches obtain this flexibility through repeated sequence-level computation. We propose Reviser, a decoder-only Transformer that generates a response as a sequence of cursor-relative actions on a mutable canvas. At each step, Reviser predicts exactly one action token: INSERT(token), MOVE(Δ), or STOP, and is autoregressive over edit-history actions rather than final text order. This design enables genuinely non-monotonic generation while preserving a simple next-action interface. On a continuation benchmark, Reviser is strongly preferred to SEDD and MDLM in our arena evaluations, and trajectory statistics confirm that the model performs frequent backward moves and mid-canvas insertions rather than merely emulating end-append decoding. Against size-matched autoregressive baselines, Reviser is competitive at both the 100M and 300M scales. Under our shared FLOPs convention, Reviser also requires substantially less inference compute than representative multi-pass refinement and diffusion-style baselines.

Instruction tuning -- tuning large language models on instruction-output pairs -- is a promising technique for making models better adapted to the real world. Yet, the key factors driving the model's capability to understand and follow instructions not seen during training remain under-explored. Our investigation begins with a series of synthetic experiments within the theoretical framework of a Turing-complete algorithm called Markov algorithm, which allows fine-grained control over the instruction-tuning data. Generalization and robustness with respect to the training distribution emerge once a diverse enough set of tasks is provided, even though very few examples are provided for each task. We extend these initial results to a real-world application scenario of code generation and find that a more diverse instruction set, extending beyond code-related tasks, improves the performance of code generation. Our observations suggest that a more diverse semantic space for instruction-tuning sets greatly improves the model's ability to follow instructions and perform tasks.

Aligned language models face a significant limitation as their fine-tuning often results in compromised safety. To tackle this, we propose a simple method RESTA that performs LLM safety realignment. RESTA stands for REstoring Safety through Task Arithmetic. At its core, it involves a simple arithmetic addition of a safety vector to the weights of the compromised model. We demonstrate the effectiveness of RESTA in both parameter-efficient and full fine-tuning, covering a wide range of downstream tasks, including instruction following in Chinese, English, and Hindi, as well as problem-solving capabilities in Code and Math. We also showcase the generalizability of RESTA on three existing safety evaluation benchmarks and a multilingual benchmark dataset proposed as a part of this work, consisting of 550 harmful questions covering 11 categories, each with 5 sub-categories of harm. Overall, RESTA decreases the harmfulness of the compromised model from 18.6% to 5.1% and from 9.2% to 1.5% in parameter-efficient and full fine-tuning, respectively, while maintaining most of the model's performance on the task. We release the source codes at: https://github.com/declare-lab/resta.

Modern LLM agents increasingly rely on dynamic structured generation, such as tool calling and response protocols. Unlike traditional structured generation with static structures, these workloads vary both across requests and within a request, posing new challenges to existing engines. We present XGrammar-2, a structured generation engine for dynamic agentic workloads. Our design is based on two key ideas: first-class support for tag-triggered structure switching, and fine-grained reuse across requests with different output structures. Concretely, XGrammar-2 introduces TagDispatch for dynamic structural dispatching and Cross-Grammar Cache for substructure-level cache reuse across grammars. It further improves efficiency with an Earley-based adaptive token mask cache, just-in-time compilation, and repetition state compression. Experiments show that XGrammar-2 achieves over 6x faster compilation than prior structured generation engines, and incurs near-zero end-to-end overhead in modern LLM serving systems.

Large Language Models (LLMs) have demonstrated potential in assisting with Register Transfer Level (RTL) design tasks. Nevertheless, there remains to be a significant gap in benchmarks that accurately reflect the complexity of real-world RTL projects. To address this, this paper presents RTL-Repo, a benchmark specifically designed to evaluate LLMs on large-scale RTL design projects. RTL-Repo includes a comprehensive dataset of more than 4000 Verilog code samples extracted from public GitHub repositories, with each sample providing the full context of the corresponding repository. We evaluate several state-of-the-art models on the RTL-Repo benchmark, including GPT-4, GPT-3.5, Starcoder2, alongside Verilog-specific models like VeriGen and RTLCoder, and compare their performance in generating Verilog code for complex projects. The RTL-Repo benchmark provides a valuable resource for the hardware design community to assess and compare LLMs' performance in real-world RTL design scenarios and train LLMs specifically for Verilog code generation in complex, multi-file RTL projects. RTL-Repo is open-source and publicly available on Github.

Finetuning large language models with a variety of instruction-response pairs has enhanced their capability to understand and follow instructions. Current instruction tuning primarily relies on teacher models or human intervention to generate and refine the instructions and responses, which are costly, non-sustainable, and may lack diversity. In this paper, we introduce Mosaic Instruction Tuning (Mosaic-IT), a human/model-free method that can efficiently create rich and diverse augmentations from existing instruction tuning data to enhance the finetuned LLM.Mosaic-IT randomly concatenates multiple instruction data into one and trains the model to produce the corresponding responses with predefined higher-level meta-instructions to strengthen its multi-step instruction-following and format-following skills. Our extensive evaluations demonstrate a superior performance and training efficiency of Mosaic-IT, which achieves consistent performance improvements over various benchmarks and an 80% reduction in training costs compared with original instruction tuning. Our codes and data are available at https://github.com/tianyi-lab/Mosaic-IT.

Instruction tuning is a pivotal technique for aligning large language models (LLMs) with human intentions, safety constraints, and domain-specific requirements. This survey provides a comprehensive overview of the full pipeline, encompassing (i) data collection methodologies, (ii) full-parameter and parameter-efficient fine-tuning strategies, and (iii) evaluation protocols. We categorized data construction into three major paradigms: expert annotation, distillation from larger models, and self-improvement mechanisms, each offering distinct trade-offs between quality, scalability, and resource cost. Fine-tuning techniques range from conventional supervised training to lightweight approaches, such as low-rank adaptation (LoRA) and prefix tuning, with a focus on computational efficiency and model reusability. We further examine the challenges of evaluating faithfulness, utility, and safety across multilingual and multimodal scenarios, highlighting the emergence of domain-specific benchmarks in healthcare, legal, and financial applications. Finally, we discuss promising directions for automated data generation, adaptive optimization, and robust evaluation frameworks, arguing that a closer integration of data, algorithms, and human feedback is essential for advancing instruction-tuned LLMs. This survey aims to serve as a practical reference for researchers and practitioners seeking to design LLMs that are both effective and reliably aligned with human intentions.

The fine-tuning of Large Language Models (LLMs) specialized in code generation has seen notable advancements through the use of open-domain coding queries. Despite the successes, existing methodologies like Evol-Instruct encounter performance limitations, impeding further enhancements in code generation tasks. This paper examines the constraints of existing prompt evolution techniques and introduces a novel approach, Instruction Fusion (IF). IF innovatively combines two distinct prompts through a hybridization process, thereby enhancing the evolution of training prompts for code LLMs. Our experimental results reveal that the proposed novel method effectively addresses the shortcomings of prior methods, significantly improving the performance of Code LLMs across five code generation benchmarks, namely HumanEval, HumanEval+, MBPP, MBPP+ and MultiPL-E, which underscore the effectiveness of Instruction Fusion in advancing the capabilities of LLMs in code generation.

Instruction tuning, a new learning paradigm that fine-tunes pre-trained language models on tasks specified through instructions, has shown promising zero-shot performance on various natural language processing tasks. However, it has yet to be explored for vision and multimodal tasks. In this work, we introduce MUL-TIINSTRUCT, the first multimodal instruction tuning benchmark dataset that consists of 62 diverse multimodal tasks in a unified seq-to-seq format covering 10 broad categories. The tasks are derived from 21 existing open-source datasets and each task is equipped with 5 expert-written instructions. We take OFA as the base pre-trained model for multimodal instruction tuning, and to further improve its zero-shot performance, we explore multiple transfer learning strategies to leverage the large-scale NATURAL INSTRUCTIONS dataset. Experimental results demonstrate strong zero-shot performance on various unseen multimodal tasks and the benefit of transfer learning from a text-only instruction dataset. We also design a new evaluation metric - Sensitivity, to evaluate how sensitive the model is to the variety of instructions. Our results indicate that fine-tuning the model on a diverse set of tasks and instructions leads to a reduced sensitivity to variations in instructions for each task.

This paper presents a parallel random-search method for reducing additive complexity in fast matrix multiplication. The approach replaces expensive exact evaluation with fast heuristic scoring, including the new Greedy-Intersections strategy. The method runs many independent common subexpression elimination processes in parallel, exploring the search space through random pair substitutions and diverse selection strategies while sharing promising partial solutions. Tested on 164 ternary-coefficient schemes, the method achieves lower addition counts than the state-of-the-art Greedy-Potential on 103 schemes, matches it on 59, and is outperformed on 2. For most schemes, it gives equal or better results while being much faster, making it practical for algorithm exploration. All software and results are open source.

Transformer-based large language models (LLMs) are constrained by the fixed context window of the underlying transformer architecture, hindering their ability to produce long and coherent outputs. Memory-augmented LLMs are a promising solution, but current approaches cannot handle long output generation tasks since they (1) only focus on reading memory and reduce its evolution to the concatenation of new memories or (2) use very specialized memories that cannot adapt to other domains. This paper presents L2MAC, the first practical LLM-based general-purpose stored-program automatic computer (von Neumann architecture) framework, an LLM-based multi-agent system, for long and consistent output generation. Its memory has two components: the instruction registry, which is populated with a prompt program to solve the user-given task, and a file store, which will contain the final and intermediate outputs. Each instruction in turn is executed by a separate LLM agent, whose context is managed by a control unit capable of precise memory reading and writing to ensure effective interaction with the file store. These components enable L2MAC to generate extensive outputs, bypassing the constraints of the finite context window while producing outputs that fulfill a complex user-specified task. We empirically demonstrate that L2MAC achieves state-of-the-art performance in generating large codebases for system design tasks, significantly outperforming other coding methods in implementing the detailed user-specified task; we show that L2MAC works for general-purpose extensive text-based tasks, such as writing an entire book; and we provide valuable insights into L2MAC's performance improvement over existing methods.

Despite the significant progress made in code generation with large language models, challenges persist, especially with hardware description languages such as Verilog. This paper first presents an analysis of fine-tuned LLMs on Verilog coding, with synthetic data from prior methods. We identify two main issues: difficulties in handling non-textual representations (Karnaugh maps, state-transition diagrams and waveforms) and significant variability during training with models randomly making "minor" mistakes. To address these limitations, we enhance data curation by creating correct-by-construction data targeting non-textual representations. Additionally, we introduce an automated framework that generates error reports from various model checkpoints and injects these errors into open-source code to create targeted code repair data. Our fine-tuned Starcoder2-15B outperforms prior state-of-the-art results by 3.8%, 10.9%, 6.6% for pass@1 on VerilogEval-Machine, VerilogEval-Human, and RTLLM.

We introduce WriteSAE, the first sparse autoencoder that decomposes and edits the matrix cache write of state-space and hybrid recurrent language models, where residual SAEs cannot reach. Existing SAEs read residual streams, but Gated DeltaNet, Mamba-2, and RWKV-7 write to a d_k times d_v cache through rank-1 updates k_t v_t^top that no vector atom can replace. WriteSAE factors each decoder atom into the native write shape, exposes a closed form for the per-token logit shift, and trains under matched Frobenius norm so atoms swap one cache slot at a time. Atom substitution beats matched-norm ablation on 92.4% of n=4{,}851 firings at Qwen3.5-0.8B L9 H4, the 87-atom population test holds at 89.8%, the closed form predicts measured effects at R^2=0.98, and Mamba-2-370M substitutes at 88.1% over 2,500 firings. Sustained three-position installs at 3times lift midrank target-in-continuation from 33.3% to 100% under greedy decoding, the first behavioral install at the matrix-recurrent write site.

The hardware ecosystem is rapidly evolving, with increasing interest in translating low-level programs across different instruction set architectures (ISAs) in a quick, flexible, and correct way to enhance the portability and longevity of existing code. A particularly challenging class of this transpilation problem is translating between complex- (CISC) and reduced- (RISC) hardware architectures, due to fundamental differences in instruction complexity, memory models, and execution paradigms. In this work, we introduce GG (Guaranteed Guess), an ISA-centric transpilation pipeline that combines the translation power of pre-trained large language models (LLMs) with the rigor of established software testing constructs. Our method generates candidate translations using an LLM from one ISA to another, and embeds such translations within a software-testing framework to build quantifiable confidence in the translation. We evaluate our GG approach over two diverse datasets, enforce high code coverage (>98%) across unit tests, and achieve functional/semantic correctness of 99% on HumanEval programs and 49% on BringupBench programs, respectively. Further, we compare our approach to the state-of-the-art Rosetta 2 framework on Apple Silicon, showcasing 1.73x faster runtime performance, 1.47x better energy efficiency, and 2.41x better memory usage for our transpiled code, demonstrating the effectiveness of GG for real-world CISC-to-RISC translation tasks. We will open-source our codes, data, models, and benchmarks to establish a common foundation for ISA-level code translation research.

Large Language Models (LLMs) have become increasingly popular for generating RTL code. However, producing error-free RTL code in a zero-shot setting remains highly challenging for even state-of-the-art LLMs, often leading to issues that require manual, iterative refinement. This additional debugging process can dramatically increase the verification workload, underscoring the need for robust, automated correction mechanisms to ensure code correctness from the start. In this work, we introduce AIvril2, a self-verifying, LLM-agnostic agentic framework aimed at enhancing RTL code generation through iterative corrections of both syntax and functional errors. Our approach leverages a collaborative multi-agent system that incorporates feedback from error logs generated by EDA tools to automatically identify and resolve design flaws. Experimental results, conducted on the VerilogEval-Human benchmark suite, demonstrate that our framework significantly improves code quality, achieving nearly a 3.4times enhancement over prior methods. In the best-case scenario, functional pass rates of 77% for Verilog and 66% for VHDL were obtained, thus substantially improving the reliability of LLM-driven RTL code generation.

Large Language Models (LLMs) have become extremely potent instruments with exceptional capacities for comprehending and producing human-like text in a wide range of applications. However, the increasing size and complexity of LLMs present significant challenges in both training and deployment, leading to substantial computational and storage costs as well as heightened energy consumption. In this paper, we provide a review of recent advancements and research directions aimed at addressing these challenges and enhancing the efficiency of LLM-based systems. We begin by discussing algorithm-level acceleration techniques focused on optimizing LLM inference speed and resource utilization. We also explore LLM-hardware co-design strategies with a vision to improve system efficiency by tailoring hardware architectures to LLM requirements. Further, we delve into LLM-to-accelerator compilation approaches, which involve customizing hardware accelerators for efficient LLM deployment. Finally, as a case study to leverage LLMs for assisting circuit design, we examine LLM-aided design methodologies for an important task: High-Level Synthesis (HLS) functional verification, by creating a new dataset that contains a large number of buggy and bug-free codes, which can be essential for training LLMs to specialize on HLS verification and debugging. For each aspect mentioned above, we begin with a detailed background study, followed by the presentation of several novel solutions proposed to overcome specific challenges. We then outline future research directions to drive further advancements. Through these efforts, we aim to pave the way for more efficient and scalable deployment of LLMs across a diverse range of applications.

GCC and LLVM underpin much of modern software infrastructure, relying on distinct Intermediate Representations (IRs) to drive optimizations and code generation. However, the semantic and structural differences between these IRs create significant barriers for cross-toolchain interaction, limiting the reuse of compiler frontends, backends, and optimization pipelines across programming languages and compilation ecosystems. Traditional rule-based translators have attempted to bridge this gap, but their complexity and maintenance cost have hindered practical adoption. In this context, Large Language Models (LLMs) appear to be an emerging technology that offers a data-driven alternative, capable of learning complex mappings between heterogeneous compiler IRs directly from sufficiently representative examples. To explore this approach, this paper presents IRIS-14B, a 14-billion-parameter transformer model fine-tuned to translate GIMPLE (as emitted by GCC) to LLVM IR (as emitted by LLVM). The model is trained on paired IRs extracted from C sources and evaluated on the GIMPLE-to-LLVM IR transformation applied to IRs derived from real-world C code and competitive programming problems. To the best of our knowledge, IRIS-14B is the first model trained explicitly for IR-to-IR translation. It outperforms the accuracy of widely used models, including the largest state-of-the-art open models available today, ranging from 13 to 1,000 billion parameters, by up to 44 percentage points. The proposed transformation supports the integration of LLMs as complementary components within hybrid neuro-symbolic compiler architectures, where models such as IRIS-14B act as interoperability layers enabling cross-toolchain workflows without modifying existing compiler passes, while traditional compiler infrastructure continues to perform deterministic compilation and optimization.

Data refinement involves executing multi-step recipes over evolving text states, where both composition and execution order of processing operators determine the outcome. While existing benchmarks either isolate text editing or entangle it with code and tool execution, it remains unclear whether LLMs can directly and faithfully execute these compositional, order-sensitive data refinement recipes. To fill this gap, we introduce CDR-Bench, a comprehensive benchmark featuring 3,462 high-quality tasks spanning four real-world data refinement domains and 29 distinct operators. Our benchmark evaluates models across atomic, order-agnostic, and order-sensitive settings, leveraging deterministic reference outputs to enable exact evaluation. Experiments on 10+ state-of-the-art LLMs reveal consistent failure patterns: performance degrades sharply in compositional settings, and order-sensitive recipe success collapses. These findings underline that current LLMs lack the procedural faithfulness required for reliable compositional data refinement.

This paper presents the Functional Machine Calculus (FMC) as a simple model of higher-order computation with "reader/writer" effects: higher-order mutable store, input/output, and probabilistic and non-deterministic computation. The FMC derives from the lambda-calculus by taking the standard operational perspective of a call-by-name stack machine as primary, and introducing two natural generalizations. One, "locations", introduces multiple stacks, which each may represent an effect and so enable effect operators to be encoded into the abstraction and application constructs of the calculus. The second, "sequencing", is known from kappa-calculus and concatenative programming languages, and introduces the imperative notions of "skip" and "sequence". This enables the encoding of reduction strategies, including call-by-value lambda-calculus and monadic constructs. The encoding of effects into generalized abstraction and application means that standard results from the lambda-calculus may carry over to effects. The main result is confluence, which is possible because encoded effects reduce algebraically rather than operationally. Reduction generates the familiar algebraic laws for state, and unlike in the monadic setting, reader/writer effects combine seamlessly. A system of simple types confers termination of the machine.

We explore the use of Large Language Models (LLMs) to generate high-quality Register-Transfer Level (RTL) code with minimal human interference. The traditional RTL design workflow requires human experts to manually write high-quality RTL code, which is time-consuming and error-prone. With the help of emerging LLMs, developers can describe their requirements to LLMs which then generate corresponding code in Python, C, Java, and more. Adopting LLMs to generate RTL design in hardware description languages is not trivial, given the complex nature of hardware design and the generated design has to meet the timing and physical constraints. We propose VeriAssist, an LLM-powered programming assistant for Verilog RTL design workflow. VeriAssist takes RTL design descriptions as input and generates high-quality RTL code with corresponding test benches. VeriAssist enables the LLM to self-correct and self-verify the generated code by adopting an automatic prompting system and integrating RTL simulator in the code generation loop. To generate an RTL design, VeriAssist first generates the initial RTL code and corresponding test benches, followed by a self-verification step that walks through the code with test cases to reason the code behavior at different time steps, and finally it self-corrects the code by reading the compilation and simulation results and generating final RTL code that fixes errors in compilation and simulation. This design fully leverages the LLMs' capabilities on multi-turn interaction and chain-of-thought reasoning to improve the quality of the generated code. We evaluate VeriAssist with various benchmark suites and find it significantly improves both syntax and functionality correctness over existing LLM implementations, thus minimizing human intervention and making RTL design more accessible to novice designers.

This paper introduces GLLM, an innovative tool that leverages Large Language Models (LLMs) to automatically generate G-code from natural language instructions for Computer Numerical Control (CNC) machining. GLLM addresses the challenges of manual G-code writing by bridging the gap between human-readable task descriptions and machine-executable code. The system incorporates a fine-tuned StarCoder-3B model, enhanced with domain-specific training data and a Retrieval-Augmented Generation (RAG) mechanism. GLLM employs advanced prompting strategies and a novel self-corrective code generation approach to ensure both syntactic and semantic correctness of the generated G-code. The architecture includes robust validation mechanisms, including syntax checks, G-code-specific verifications, and functional correctness evaluations using Hausdorff distance. By combining these techniques, GLLM aims to democratize CNC programming, making it more accessible to users without extensive programming experience while maintaining high accuracy and reliability in G-code generation.

Code Large Language Models (Code LLMs) have demonstrated outstanding performance in code-related tasks. Several instruction tuning approaches have been proposed to boost the code generation performance of pre-trained Code LLMs. In this paper, we introduce a diverse instruction model (DolphCoder) with self-evaluating for code generation. It learns diverse instruction targets and combines a code evaluation objective to enhance its code generation ability. Our model achieves superior performance on the HumanEval and MBPP benchmarks, demonstrating new insights for future code instruction tuning work. Our key findings are: (1) Augmenting more diverse responses with distinct reasoning paths increases the code capability of LLMs. (2) Improving one's ability to evaluate the correctness of code solutions also enhances their ability to create it.

Token mixing layers play a key role in how language models can learn and generate long-range dependencies. Their efficiency relies on the necessary trade-off between decoding speed and the memory requirements, along with the cache size. Considering causal generation, this paper explores new trade-offs thanks to a unified framework which separates two crucial features: (i) the direct influence of inputs on outputs in one generation step; (ii) the recurrent propagation of information through past outputs. This framework encompasses major architectures such as attention and state-space models, but also generalizes the recurrence equations by allowing each state to depend on multiple past states rather than only the immediate predecessor. By introducing structure, we design new recurrence patterns that provably achieve the desired complexity, while providing theoretical insights on their expressivity -- trading runtime for expressivity in a principled way. Empirical validation is performed on synthetic tasks, along with language modeling. Together, these results provide a unified toolkit for the understanding and design of efficient and expressive token mixers across model families.

Block Diffusion Language Models (BD-LMs) improve diffusion-based text generation with KV caching and flexible-length generation. A natural next step is to extend them from Single-Block Diffusion (SingleBD) to Multi-Block Diffusion (MultiBD), where a running-set of consecutive blocks is decoded concurrently for inter-block parallelism. However, existing BD-LMs are mostly trained under teacher forcing, where the model observes only one noisy block conditioned on a clean prefix. While the recent diffusion forcing strategy introduces visibility among multiple noisy blocks, its training states still differ from MultiBD inference, where decoding operates on a bounded running-set with heterogeneous slot-wise noise patterns. To bridge this gap, we propose Multi-Block Diffusion Language Models (MBD-LMs), obtained by post-training BD-LMs with Multi-block Teacher Forcing (MultiTF). MultiTF integrates teacher forcing and diffusion forcing by training on bounded noise-groups conditioned on clean prefixes, with randomized noise-schedulers that better match MultiBD inference states. To make MultiBD practically executable, we further introduce an optimized decoding algorithm based on the Block Buffer mechanism that preserves prefix-cache reuse, keeps input shapes static, and translates increased decoding parallelism into wall-clock acceleration. Empirically, MBD-LLaDA2-Mini increases average Tokens Per Forward pass (TPF) from 3.47 to 6.19 and improves average accuracy from 79.95% to 81.03%; when combined with DMax, MBD-LLaDA2-Mini-DMax reaches an average TPF of 9.34 with only a 1.02% accuracy drop on math and code benchmarks.

Instruction Tuning involves finetuning a language model on a collection of instruction-formatted datasets in order to enhance the generalizability of the model to unseen tasks. Studies have shown the importance of balancing different task proportions during finetuning, but finding the right balance remains challenging. Unfortunately, there's currently no systematic method beyond manual tuning or relying on practitioners' intuition. In this paper, we introduce SMART (Submodular data Mixture strAtegy for instRuction Tuning) - a novel data mixture strategy which makes use of a submodular function to assign importance scores to tasks which are then used to determine the mixture weights. Given a fine-tuning budget, SMART redistributes the budget among tasks and selects non-redundant samples from each task. Experimental results demonstrate that SMART significantly outperforms traditional methods such as examples proportional mixing and equal mixing. Furthermore, SMART facilitates the creation of data mixtures based on a few representative subsets of tasks alone and through task pruning analysis, we reveal that in a limited budget setting, allocating budget among a subset of representative tasks yields superior performance compared to distributing the budget among all tasks. The code for reproducing our results is open-sourced at https://github.com/kowndinya-renduchintala/SMART.

Large Language Models (LLMs) have proved effective and efficient in generating code, leading to their utilization within the hardware design process. Prior works evaluating LLMs' abilities for register transfer level code generation solely focus on functional correctness. However, the creativity associated with these LLMs, or the ability to generate novel and unique solutions, is a metric not as well understood, in part due to the challenge of quantifying this quality. To address this research gap, we present CreativeEval, a framework for evaluating the creativity of LLMs within the context of generating hardware designs. We quantify four creative sub-components, fluency, flexibility, originality, and elaboration, through various prompting and post-processing techniques. We then evaluate multiple popular LLMs (including GPT models, CodeLlama, and VeriGen) upon this creativity metric, with results indicating GPT-3.5 as the most creative model in generating hardware designs.

Large language models (LLMs) for code rely on subword tokenizers, such as byte-pair encoding (BPE), learned from mixed natural language text and programming language code but driven by statistics rather than grammar. As a result, semantically identical code snippets can be tokenized differently depending on superficial factors such as whitespace or identifier naming. To measure the impact of this misalignment, we introduce TokDrift, a framework that applies semantic-preserving rewrite rules to create code variants differing only in tokenization. Across nine code LLMs, including large ones with over 30B parameters, even minor formatting changes can cause substantial shifts in model behavior. Layer-wise analysis shows that the issue originates in early embeddings, where subword segmentation fails to capture grammar token boundaries. Our findings identify misaligned tokenization as a hidden obstacle to reliable code understanding and generation, highlighting the need for grammar-aware tokenization for future code LLMs.

Despite their remarkable performance, large language models lack elementary safety features, making them susceptible to numerous malicious attacks. In particular, previous work has identified the absence of an intrinsic separation between instructions and data as the root cause of the success of prompt injection attacks. In this work, we propose a new architectural element, ASIDE, that allows language models to clearly separate instructions and data at the level of token embeddings. ASIDE applies an orthogonal rotation to the embeddings of data tokens, thus creating clearly distinct representations of instructions and data tokens without introducing any additional parameters. As we demonstrate experimentally across a range of models, instruction-tuning LLMs with ASIDE (1) achieves substantially higher instruction-data separation without performance loss and (2) makes the models more robust to prompt injection benchmarks, even without dedicated safety training. Additionally, we provide insights into the mechanism underlying our method through an analysis of the model representations. The source code and training scripts are openly accessible at https://github.com/egozverev/aside.

Intermediate Representations (IRs) play a critical role in compiler design and program analysis, yet their comprehension by Large Language Models (LLMs) remains underexplored. In this paper, we present an explorative empirical study evaluating the capabilities of six state-of-the-art LLMs: GPT-4, GPT-3, DeepSeek, Gemma 2, Llama 3, and Code Llama, in understanding IRs. Specifically, we assess model performance across four core tasks: control flow graph reconstruction, decompilation, code summarization, and execution reasoning. While LLMs exhibit competence in parsing IR syntax and identifying high-level structures, they consistently struggle with instruction-level reasoning, especially in control flow reasoning, loop handling, and dynamic execution. Common failure modes include misinterpreting branching instructions, omitting critical operations, and relying on heuristic reasoning rather than precise instruction-level logic. Our findings highlight the need for IR-specific enhancements in LLM design. We recommend fine-tuning on structured IR datasets and integrating control-flow-sensitive architectures to improve model effectiveness. All experimental data and source code are publicly available at

Code large language models (codeLLMs) have made significant strides in code generation. Most previous code-related benchmarks, which consist of various programming exercises along with the corresponding test cases, are used as a common measure to evaluate the performance and capabilities of code LLMs. However, the current code LLMs focus on synthesizing the correct code snippet, ignoring the alignment with human preferences, where the query should be sampled from the practical application scenarios and the model-generated responses should satisfy the human preference. To bridge the gap between the model-generated response and human preference, we present a rigorous human-curated benchmark CodeArena to emulate the complexity and diversity of real-world coding tasks, where 397 high-quality samples spanning 40 categories and 44 programming languages, carefully curated from user queries. Further, we propose a diverse synthetic instruction corpus SynCode-Instruct (nearly 20B tokens) by scaling instructions from the website to verify the effectiveness of the large-scale synthetic instruction fine-tuning, where Qwen2.5-SynCoder totally trained on synthetic instruction data can achieve top-tier performance of open-source code LLMs. The results find performance differences between execution-based benchmarks and CodeArena. Our systematic experiments of CodeArena on 40+ LLMs reveal a notable performance gap between open SOTA code LLMs (e.g. Qwen2.5-Coder) and proprietary LLMs (e.g., OpenAI o1), underscoring the importance of the human preference alignment.\url{https://codearenaeval.github.io/ }

Despite the rapid progress in the capabilities of Large Language Models (LLMs), they continue to have difficulty following relatively simple, unambiguous instructions, especially when compositions are involved. In this paper, we take inspiration from recent work that suggests that models may follow instructions better when they are expressed in pseudo-code. However, writing pseudo-code programs can be tedious and using few-shot demonstrations to craft code representations for use in inference can be unnatural for non-expert users of LLMs. To overcome these limitations, we propose fine-tuning LLMs with instruction-tuning data that additionally includes instructions re-expressed in pseudo-code along with the final response. We evaluate models trained using our method on 11 publicly available benchmarks comprising of tasks related to instruction-following, mathematics, and common-sense reasoning. We conduct rigorous experiments with 5 different models and find that not only do models follow instructions better when trained with pseudo-code, they also retain their capabilities on the other tasks related to mathematical and common sense reasoning. Specifically, we observe a relative gain of 3--19% on instruction-following benchmark, and an average gain of upto 14% across all tasks.

We explore the novel application of Large Language Models to code optimization. We present a 7B-parameter transformer model trained from scratch to optimize LLVM assembly for code size. The model takes as input unoptimized assembly and outputs a list of compiler options to best optimize the program. Crucially, during training, we ask the model to predict the instruction counts before and after optimization, and the optimized code itself. These auxiliary learning tasks significantly improve the optimization performance of the model and improve the model's depth of understanding. We evaluate on a large suite of test programs. Our approach achieves a 3.0% improvement in reducing instruction counts over the compiler, outperforming two state-of-the-art baselines that require thousands of compilations. Furthermore, the model shows surprisingly strong code reasoning abilities, generating compilable code 91% of the time and perfectly emulating the output of the compiler 70% of the time.

Recent studies have illuminated that Large Language Models (LLMs) exhibit substantial potential in the realm of RTL (Register Transfer Level) code generation, with notable advancements evidenced by commercial models such as GPT-4 and Claude3-Opus. Despite their proficiency, these commercial LLMs often raise concerns regarding privacy and security. Conversely, open-source LLMs, which offer solutions to these concerns, have inferior performance in RTL code generation tasks to commercial models due to the lack of highquality open-source RTL datasets. To address this issue, we introduce OriGen, a fully open-source framework featuring self-reflection capabilities and a dataset augmentation methodology for generating high-quality, large-scale RTL code. We propose a novel code-to-code augmentation methodology that leverages knowledge distillation to enhance the quality of the open-source RTL code datasets. Additionally, OriGen is capable of correcting syntactic errors by leveraging a self-reflection process based on feedback from the compiler. The self-reflection ability of the model is facilitated by a carefully constructed dataset, which comprises a comprehensive collection of samples. Experimental results demonstrate that OriGen remarkably outperforms other open-source alternatives in RTL code generation, surpassing the previous best-performing LLM by 9.8% on the VerilogEval-Human benchmark. Furthermore, OriGen exhibits superior capabilities in self-reflection and error rectification, surpassing GPT-4 by 18.1% on the benchmark designed to evaluate the capability of self-reflection.

With the growing demand for applying large language models to downstream tasks, improving model alignment performance and efficiency has become crucial. Such a process involves selecting informative instructions from a candidate pool. However, due to the complexity of instruction set distributions, the key factors driving the performance of aligned models remain unclear. As a result, current instruction set refinement methods fail to improve performance as the instruction pool expands continuously. To address this issue, we first investigate the key factors that influence the relationship between instruction dataset distribution and aligned model performance. Based on these insights, we propose a novel instruction data selection method. We identify that the depth of instructions and the coverage of the semantic space are the crucial factors determining downstream performance, which could explain over 70\% of the model loss on the development set. We then design an instruction selection algorithm to simultaneously maximize the depth and semantic coverage of the selected instructions. Experimental results demonstrate that, compared to state-of-the-art baseline methods, it can sustainably improve model performance at a faster pace and thus achieve ``Accelerated Scaling''.

LLMs have shown early promise in generating RTL code, yet evaluating their capabilities in realistic setups remains a challenge. So far, RTL benchmarks have been limited in scale, skewed toward trivial designs, offering minimal verification rigor, and remaining vulnerable to data contamination. To overcome these limitations and to push the field forward, this paper introduces NotSoTiny, a benchmark that assesses LLM on the generation of structurally rich and context-aware RTL. Built from hundreds of actual hardware designs produced by the Tiny Tapeout community, our automated pipeline removes duplicates, verifies correctness and periodically incorporates new designs to mitigate contamination, matching Tiny Tapeout release schedule. Evaluation results show that NotSoTiny tasks are more challenging than prior benchmarks, emphasizing its effectiveness in overcoming current limitations of LLMs applied to hardware design, and in guiding the improvement of such promising technology.

Large language models (LLMs) are highly susceptible to backdoor attacks (BAs), wherein training samples are poisoned using trigger-based harmful content. Furthermore, existing defenses have proven ineffective when extensively tested across BA patterns. To better combat BAs, we explore the use of LLM rewriting as a proactive defense against data poisoning. First, we theoretically show that when LLM rewriting utilizes open-book benign samples--termed open-book benign rewriting (OBBR)--the probability of a rewritten output being benign is strictly greater than that of closed-book rewriting. Thus, OBBR neutralizes harmful content by projecting training samples to the space of benign prompts. We then show that, in contrast to previous defenses, OBBR effectively mitigates a large number of existing BAs: across five known BAs and four widely used LLMs, OBBR increases safety performance by an average 51% compared to state-of-the-art BA defenses and 25.7% compared to closed-book rewriting methods. Finally, we show that OBBR is computationally efficient relative to other BA defenses, does not degrade model performance on natural language tasks after fine-tuning, and is capable of defending against non-trigger based data poisoning attacks.

Instruction tuning enhances large language models (LLMs) by aligning them with human preferences across diverse tasks. Traditional approaches to create instruction tuning datasets face serious challenges for low-resource languages due to their dependence on data annotation. This work introduces a novel method, Multilingual Reverse Instructions (MURI), which generates high-quality instruction tuning datasets for low-resource languages without requiring human annotators or pre-existing multilingual models. Utilizing reverse instructions and a translation pipeline, MURI produces instruction-output pairs from existing human-written texts in low-resource languages. This method ensures cultural relevance and diversity by sourcing texts from different native domains and applying filters to eliminate inappropriate content. Our dataset, MURI-IT, includes more than 2 million instruction-output pairs across 200 languages. Evaluation by native speakers and fine-tuning experiments with mT5 models demonstrate the approach's effectiveness for both NLU and open-ended generation. We publicly release datasets and models at https://github.com/akoksal/muri.

This paper provides a novel approach to reconciling complex low-level memory model features, such as pointer--integer casts, with desired refinements that are needed to justify the correctness of program transformations. The idea is to use a "two-phased" memory model, one with and unbounded memory and corresponding unbounded integer type, and one with a finite memory; the connection between the two levels is made explicit by our notion of refinement that handles out-of-memory behaviors. This approach allows for more optimizations to be performed and establishes a clear boundary between the idealized semantics of a program and the implementation of that program on finite hardware. To demonstrate the utility of this idea in practice, we instantiate the two-phase memory model in the context of Zakowski et al.'s VIR semantics, yielding infinite and finite memory models of LLVM IR, including low-level features like undef and bitcast. Both the infinite and finite models, which act as specifications, can provably be refined to executable reference interpreters. The semantics justify optimizations, such as dead-alloca-elimination, that were previously impossible or difficult to prove correct.

Model merging combines trained models directly in weight space, offering a compute-efficient alternative to additional fine-tuning. Selecting merge parameters is nevertheless difficult because downstream evaluations are expensive, gradients are unavailable, and source capabilities can conflict. We formulate merge-parameter selection as a black-box multi-objective optimization problem and introduce MOBO-Merge, a merge-operator agnostic framework that uses multi-objective Bayesian optimization to approximate the Pareto front under a limited evaluation budget. We evaluate Qwen3-4B and Llama-3.1-8B in two-model instruction-math and three-model instruction-math-code settings using Linear, SLERP, TIES, and block-wise merge operators. On held-out benchmark partitions, MOBO-Merge obtains higher mean hypervolume than random search in 11 of 12 reported comparisons. The gain is small for one-dimensional Linear interpolation but substantially larger for several TIES, block-wise, and three-objective searches. No merge operator is uniformly best: TIES leads in three of four family-setting combinations, whereas Block-Linear 4x is strongest for the Llama three-model merge. These results show that multi-objective Bayesian optimization is valuable as a search layer for expressive merge parameterizations.

For a complicated algorithm, its implementation by a human programmer usually starts with outlining a rough control flow followed by iterative enrichments, eventually yielding carefully generated syntactic structures and variables in a hierarchy. However, state-of-the-art large language models generate codes in a single pass, without intermediate warm-ups to reflect the structured thought process of "outline-then-detail". Inspired by the recent success of chain-of-thought prompting, we propose ChainCoder, a program synthesis language model that generates Python code progressively, i.e. from coarse to fine in multiple passes. We first decompose source code into layout frame components and accessory components via abstract syntax tree parsing to construct a hierarchical representation. We then reform our prediction target into a multi-pass objective, each pass generates a subsequence, which is concatenated in the hierarchy. Finally, a tailored transformer architecture is leveraged to jointly encode the natural language descriptions and syntactically aligned I/O data samples. Extensive evaluations show that ChainCoder outperforms state-of-the-arts, demonstrating that our progressive generation eases the reasoning procedure and guides the language model to generate higher-quality solutions. Our codes are available at: https://github.com/VITA-Group/ChainCoder.

Large language models rely heavily on prompts to specify tasks, recall knowledge and guide reasoning. However, this reliance is inefficient as prompts must be re-read at each step, scale poorly across tasks, and lack mechanisms for modular reuse. We introduce TokMem, a tokenized procedural memory that stores recurring procedures as compact, trainable embeddings. Each memory token encodes both an address to a procedure and a control signal that steers generation, enabling targeted behavior with constant-size overhead. To support continual adaptation, TokMem keeps the backbone model frozen, allowing new procedures to be added without interfering with existing ones. We evaluate TokMem on 1,000 tasks for atomic recall, and on function-calling tasks for compositional recall, where it consistently outperforms retrieval-augmented generation while avoiding repeated context overhead, and fine-tuning with far fewer parameters. These results establish TokMem as a scalable and modular alternative to prompt engineering and fine-tuning, offering an explicit procedural memory for LLMs.

Agent skills provide reusable knowledge and instructions, yet agents must repeatedly infer how to apply them and which operation should follow. This couples task reasoning with control decisions, allowing prescribed steps to be omitted or applied incorrectly. We introduce HEXIS, which compiles agent skills into extended finite state machines that separate knowledge from control flow. Skill knowledge is incorporated into local instructions that guide reasoning and generation within states. The machine records execution progress and intermediate results, while explicit transition conditions determine subsequent operations. Our incremental compiler first maps skill clauses and tool interfaces to state operations, local instructions, data bindings, and transitions. It then aligns development traces with existing states to identify missing operations and dependencies. These are incorporated by adding or reusing states and refining their connections. Updates are accepted only after static checks and replay of the current and all previously accepted traces. Across four benchmarks and four executors, HEXIS improves success over Skill + ReAct by 16.1 percentage points on average. Qwen3.8-27B reduces execution tokens by 38.4-88.9% across benchmarks.

Multi-LLM revision pipelines, in which a second model reviews and improves a draft produced by a first, are widely assumed to derive their gains from genuine error correction. We question this assumption with a controlled decomposition experiment that uses four matched conditions to separate second-pass gains into three additive components: re-solving, scaffold, and content. We evaluate this design across two model pairs on three benchmarks spanning knowledge-intensive MCQ and competitive programming. Our results show that the gains of multi-LLM revision are not monolithic, but depend on task structure, draft quality, and the type of draft information. On MCQ tasks, where the answer space is constrained and drafts provide little structural guidance, most gains are consistent with stronger-model re-solving, and directly routing queries to the stronger model can be more effective than revising a weak draft. On code generation tasks, however, two-stage prompting remains useful because even semantically null drafts can provide substantial structural scaffolding, while weak draft content can be harmful. Finally, role-reversed experiments show that strong drafts clearly benefit weak reviewers. Ultimately, our findings demonstrate that the utility of multi-LLM revision is dynamically bottlenecked by task structure and draft quality, necessitating more targeted pipeline designs rather than blanket revision strategies.

Recent advances in Large Language Models (LLMs) have sparked growing interest in applying them to Electronic Design Automation (EDA) tasks, particularly Register Transfer Level (RTL) code generation. While several RTL datasets have been introduced, most focus on syntactic validity rather than functional validation with tests, leading to training examples that compile but may not implement the intended behavior. We present VERICODER, a model for RTL code generation fine-tuned on a dataset validated for functional correctness. This fine-tuning dataset is constructed using a novel methodology that combines unit test generation with feedback-directed refinement. Given a natural language specification and an initial RTL design, we prompt a teacher model (GPT-4o-mini) to generate unit tests and iteratively revise the RTL design based on its simulation results using the generated tests. If necessary, the teacher model also updates the tests to ensure they comply with the natural language specification. As a result of this process, every example in our dataset is functionally validated, consisting of a natural language description, an RTL implementation, and passing tests. Fine-tuned on this dataset of over 125,000 examples, VERICODER achieves state-of-the-art metrics in functional correctness on VerilogEval and RTLLM, with relative gains of up to 71.7% and 27.4% respectively. An ablation study further shows that models trained on our functionally validated dataset outperform those trained on functionally non-validated datasets, underscoring the importance of high-quality datasets in RTL code generation.

The ability of large language models (LLMs) to follow instructions is crucial to real-world applications. Despite recent advances, several studies have highlighted that LLMs struggle when faced with challenging instructions, especially those that include complex constraints, hindering their effectiveness in various tasks. To address this challenge, we introduce Conifer, a novel instruction tuning dataset, designed to enhance LLMs to follow multi-level instructions with complex constraints. Utilizing GPT-4, we curate the dataset by a series of LLM-driven refinement processes to ensure high quality. We also propose a progressive learning scheme that emphasizes an easy-to-hard progression, and learning from process feedback. Models trained with Conifer exhibit remarkable improvements in instruction-following abilities, especially for instructions with complex constraints. On several instruction-following benchmarks, our 7B model outperforms the state-of-the-art open-source 7B models, even exceeds the performance of models 10 times larger on certain metrics. All the code and Conifer dataset are available at https://www.github.com/ConiferLM/Conifer.

Large Language Models (LLMs) have demonstrated promising capabilities in generating Verilog code from module specifications. To improve the quality of such generated Verilog codes, previous methods require either time-consuming manual inspection or generation of multiple Verilog codes, from which the one with the highest quality is selected with manually designed testbenches. To enhance the generation efficiency while maintaining the quality of the generated codes, we propose VRank, an automatic framework that generates Verilog codes with LLMs. In our framework, multiple code candidates are generated with LLMs by leveraging their probabilistic nature. Afterwards, we group Verilog code candidates into clusters based on identical outputs when tested against the same testbench, which is also generated by LLMs. Clusters are ranked based on the consistency they show on testbench. To determine the best candidate, Chain-of-Thought is further applied to select the best candidate from the top-ranked clusters. By systematically analyzing diverse outputs of generated codes, VRank reduces errors and enhances the overall quality of the generated Verilog code. Experimental results on the VerilogEval-Human benchmark demonstrate a significant 10.5% average increase in functional correctness (passl1) across multiple LLMs, demonstrating VRank's effectiveness in improving the accuracy of automated hardware description language generation for complex design tasks.

Multi-turn instruction following capability constitutes a core competency of large language models (LLMs) in real-world applications. Existing evaluation benchmarks predominantly focus on fine-grained constraint satisfaction and domain-specific capability assessment, yet overlook the crucial structural dependency between dialogue turns that distinguishes multi-turn from single-turn interactions. This structural dependency not only reflects user intent but also establishes a second dimension for instruction following evaluation beyond constraint satisfaction. To address this gap, we propose StructFlowBench, a multi-turn instruction following benchmark with structural flow modeling. The benchmark innovatively defines a structural flow framework comprising six fundamental inter-turn relationships, which not only introduces novel structural constraints for model evaluation but also serves as generation parameters for creating customized dialogue flows tailored to specific scenarios. Adopting established LLM-based automatic evaluation methodologies, we conduct systematic evaluations of 13 leading open-source and closed-source LLMs. Experimental results reveal significant deficiencies in current models' comprehension of multi-turn dialogue structures. The code is available at https://github.com/MLGroupJLU/StructFlowBench.

An open-source C++ framework for discovering fast matrix multiplication schemes using the flip graph approach is presented. The framework supports multiple coefficient rings -- binary (Z_2), modular ternary (Z_3) and integer ternary (Z_T = {-1,0,1}) -- and implements both fixed-dimension and meta-dimensional search operators. Using efficient bit-level encoding of coefficient vectors and OpenMP parallelism, the tools enable large-scale exploration on commodity hardware. The study covers 680 schemes ranging from (2 times 2 times 2) to (16 times 16 times 16), with 276 schemes now in Z_T coefficients and 117 in integer coefficients. With this framework, the multiplicative complexity (rank) is improved for 79 matrix multiplication schemes. Notably, a new 4 times 4 times 10 scheme requiring only 115 multiplications is discovered, achieving ωapprox 2.80478 and beating Strassen's exponent for this specific size. Additionally, 93 schemes are rediscovered in ternary coefficients that were previously known only over rationals or integers, and 68 schemes in integer coefficients that previously required fractions. All tools and discovered schemes are made publicly available to enable reproducible research.

Large language models (LLMs) are increasingly used for complex tasks requiring multiple chained generation calls, advanced prompting techniques, control flow, and interaction with external environments. However, efficient systems for programming and executing these applications are lacking. To bridge this gap, we introduce SGLang, a Structured Generation Language for LLMs. SGLang is designed for the efficient programming of LLMs and incorporates primitives for common LLM programming patterns. We have implemented SGLang as a domain-specific language embedded in Python, and we developed an interpreter, a compiler, and a high-performance runtime for SGLang. These components work together to enable optimizations such as parallelism, batching, caching, sharing, and other compilation techniques. Additionally, we propose RadixAttention, a novel technique that maintains a Least Recently Used (LRU) cache of the Key-Value (KV) cache for all requests in a radix tree, enabling automatic KV cache reuse across multiple generation calls at runtime. SGLang simplifies the writing of LLM programs and boosts execution efficiency. Our experiments demonstrate that SGLang can speed up common LLM tasks by up to 5x, while reducing code complexity and enhancing control.

The increasing popularity of large language models (LLMs) has paved the way for their application in diverse domains. This paper proposes a benchmarking framework tailored specifically for evaluating LLM performance in the context of Verilog code generation for hardware design and verification. We present a comprehensive evaluation dataset consisting of 156 problems from the Verilog instructional website HDLBits. The evaluation set consists of a diverse set of Verilog code generation tasks, ranging from simple combinational circuits to complex finite state machines. The Verilog code completions can be automatically tested for functional correctness by comparing the transient simulation outputs of the generated design with a golden solution. We also demonstrate that the Verilog code generation capability of pretrained language models could be improved with supervised fine-tuning by bootstrapping with LLM generated synthetic problem-code pairs.

The increasing complexity and high costs associated with modern processor design have led to a surge in demand for processor design automation. Instruction-tuned large language models (LLMs) have demonstrated remarkable performance in automatically generating code for general-purpose programming languages like Python. However, these methods fail on hardware description languages (HDLs) like Verilog due to the scarcity of high-quality instruction tuning data, as even advanced LLMs like GPT-3.5 exhibit limited performance on Verilog generation. Regarding this issue, we observe that (1) Verilog code collected from the real world has higher quality than those generated by LLMs. (2) LLMs like GPT-3.5 excel in summarizing Verilog code rather than generating it. Based on these observations, this paper introduces CodeV, a series of open-source instruction-tuned Verilog generation LLMs. Instead of generating descriptions first and then getting the corresponding code from advanced LLMs, we prompt the LLM with Verilog code and let the LLM generate the corresponding natural language description by multi-level summarization. Experimental results show that CodeV relatively surpasses the previous open-source SOTA by 14.4% (BetterV in VerilogEval) and 11.3% (RTLCoder in RTLLM) respectively, and also relatively outperforms previous commercial SOTA GPT-4 by 22.1% in VerilogEval.

Instruction tuning -- fine-tuning a large language model (LLM) on pairs of instructions and desired outcomes -- is an approach that enables pre-trained language models to perform real-world tasks and follow human instructions. Its practical success depends on the model learning a broader set of instructions than those it was trained on. Yet the factors that determine model generalization to such unseen tasks are not well understood. %To understand the driving factors of generalization, In this paper, we experiment with string rewrites, a symbolic task that serves as a building block for Turing complete Markov algorithms while allowing experimental control of "inputs" and "instructions". We investigate the trade-off between the number of instructions the model is trained on and the number of training samples provided for each instruction and observe that the diversity of the instruction set determines generalization. Generalization emerges once a diverse enough set of tasks is provided, even though very few examples are provided for each task. Instruction diversity also ensures robustness with respect to non-uniform distributions of instructions in the training set.

Long-sequence memory tracking places two opposing demands on a recurrent state: near-lossless retention of stored bindings over long horizons, and active overwriting of stale ones. In our diagnostic suite, the strongest efficient baselines tend to solve only one side well. Continuous-time-parameterized state-space models (SSMs) such as Mamba obtain their discrete recurrence by zero-order-hold discretization of a continuous-time system; we argue that this detour is unnecessary for memory tracking and parameterize the discrete transition directly. Naju (Native Adaptive Junction Unit) factorizes the recurrent update, schematically x_n = f_nodot x_{n-1} + i_nodot(B_n u_n), into an explicit discrete pole (a learned forget gate f_n), an independent write gain i_n, and input-dependent write/read maps. Since the sigmoid pole satisfies 0<f_n<1, each frozen local coordinate is Schur-stable by construction, and the full time-varying recurrence satisfies a fading-memory/BIBO bound under uniform boundedness assumptions, with no stability regularizer. We formalize the key structural limitation of coupled designs: any non-expansive complementary single-gate recurrence ties the effective retention r and write gain w through |r|+wle 1, so near-complete retention forces weak writing; decoupling f_n from i_n removes this constraint. Empirically, Naju is the only evaluated model that remains strong on both retention and overwriting at 4x the training length. Beyond the diagnostic suite, we evaluate Naju on WikiText-103 language modeling, Long Range Arena, and multi-query associative recall. Across these settings, Naju consistently combines strong long-range memory with competitive or superior performance, outperforming the Mamba baselines in the principal comparisons while remaining competitive with the Transformer and preserving linear-time, linear-memory scaling.

With the advent of neural language models, the performance of code generation has been significantly boosted. However, the problem of repetitions during the generation process continues to linger. Previous work has primarily focused on content repetition, which is merely a fraction of the broader repetition problem in code generation. A more prevalent and challenging problem is structural repetition. In structural repetition, the repeated code appears in various patterns but possesses a fixed structure, which can be inherently reflected in grammar. In this paper, we formally define structural repetition and propose an efficient decoding approach called RPG, which stands for Repetition Penalization based on Grammar, to alleviate the repetition problems in code generation for LLMs. Specifically, RPG first leverages grammar rules to identify repetition problems during code generation, and then strategically decays the likelihood of critical tokens that contribute to repetitions, thereby mitigating them in code generation. To facilitate this study, we construct a new dataset CodeRepetEval to comprehensively evaluate approaches for mitigating the repetition problems in code generation. Extensive experimental results demonstrate that RPG substantially outperforms the best-performing baselines on CodeRepetEval dataset as well as HumanEval and MBPP benchmarks, effectively reducing repetitions and enhancing the quality of generated code.

Context: Bugs in code are inevitable and can lead to severe consequences, ranging from security vulnerabilities to operational failures. Debugging software remains challenging despite advances in testing and verification, often requiring extensive manual effort. Learning-based automated program repair (APR) has shown promise in reducing the time, effort, and cost of manually fixing bugs. However, existing techniques face several challenges, including language-dependent strategies, limited bug context utilization, and difficulties in handling bugs that span multiple locations in the code. Objective: This paper introduces MultiMend, a learning-based APR approach designed to improve repair performance on multiple programming languages with language-independent context augmentation and multi-hunk patch generation. Method: MultiMend fine-tunes a pre-trained encoder-decoder transformer model (CodeT5) to generate bug-fixing patches. It embeds source code lines and applies retrieval-augmented generation to augment the buggy context with relevant lines during patch generation. The approach systematically constructs patches for multi-hunk bugs to reduce the needed patch validations. We evaluate MultiMend on four benchmarks with four programming languages and compare it with state-of-the-art methods. Results: Experimental results show that MultiMend achieves competitive effectiveness and efficiency against compared tools. Across all benchmarks, MultiMend fixes 2,077 bugs, of which 1,455 are identical to the developer's patch, and 106 are for multi-hunk bugs. Both context augmentation and multi-hunk patch generation positively contribute to the results. Conclusion: MultiMend shows promising performance across benchmarks. The findings highlight its applicability to real-world software maintenance and its potential to reduce manual debugging efforts.

The research in AI-based formal mathematical reasoning has shown an unstoppable growth trend. These studies have excelled in mathematical competitions like IMO, showing significant progress. However, these studies intertwined multiple skills simultaneously, i.e., problem-solving, reasoning, and writing formal specifications, making it hard to precisely identify the LLMs' strengths and weaknesses in each task. This paper focuses on formal verification, an immediate application scenario of formal reasoning, and decomposes it into six sub-tasks. We constructed 18k high-quality instruction-response pairs across five mainstream formal specification languages (Coq, Lean4, Dafny, ACSL, and TLA+) in six formal-verification-related tasks by distilling GPT-4o. They are split into a 14k+ fine-tuning dataset FM-alpaca and a 4k benchmark FM-Bench. We found that LLMs are good at writing proof segments when given either the code, or the detailed description of proof steps. Also, the fine-tuning brought about a nearly threefold improvement at most. Interestingly, we observed that fine-tuning with formal data also enhances mathematics, reasoning, and coding abilities. We hope our findings inspire further research. Fine-tuned models are released to facilitate subsequent studies

Mixture-of-Experts (MoE) models have shown remarkable capability in instruction tuning, especially when the number of tasks scales. However, previous methods simply merge all training tasks (e.g. creative writing, coding, and mathematics) and apply fixed sampling weights, without considering the importance of different tasks as the model training state changes. In this way, the most helpful data cannot be effectively distinguished, leading to suboptimal model performance. To reduce the potential redundancies of datasets, we make the first attempt and propose a novel dynamic data mixture for MoE instruction tuning. Specifically, inspired by MoE's token routing preference, we build dataset-level representations and then capture the subtle differences among datasets. Finally, we propose to dynamically adjust the sampling weight of datasets by their inter-redundancies, thus maximizing global performance under a limited training budget. The experimental results on two MoE models demonstrate the effectiveness of our approach on both downstream knowledge \& reasoning tasks and open-ended queries. Code and models are available at https://github.com/Spico197/MoE-SFT .

Fine-tuning large language models (LLMs) with a collection of large and diverse instructions has improved the model's generalization to different tasks, even for unseen tasks. However, most existing instruction datasets include only single instructions, and they struggle to follow complex instructions composed of multiple subtasks (Wang et al., 2023a). In this work, we propose a novel concept of compositional instructions called chain-of-instructions (CoI), where the output of one instruction becomes an input for the next like a chain. Unlike the conventional practice of solving single instruction tasks, our proposed method encourages a model to solve each subtask step by step until the final answer is reached. CoI-tuning (i.e., fine-tuning with CoI instructions) improves the model's ability to handle instructions composed of multiple subtasks. CoI-tuned models also outperformed baseline models on multilingual summarization, demonstrating the generalizability of CoI models on unseen composite downstream tasks.

Recent advances in large language models (LLMs) have sparked growing interest in applying them to hardware design automation, particularly for accurate RTL code generation. Prior efforts follow two largely independent paths: (i) training domain-adapted RTL models to internalize hardware semantics, (ii) developing agentic systems that leverage frontier generic LLMs guided by simulation feedback. However, these two paths exhibit complementary strengths and weaknesses. In this work, we present ACE-RTL that unifies both directions through Agentic Context Evolution (ACE). ACE-RTL integrates an RTL-specialized LLM, trained on a large-scale dataset of 1.7 million RTL samples, with a frontier reasoning LLM through three synergistic components: the generator, reflector, and coordinator. These components iteratively refine RTL code toward functional correctness. We further introduce a parallel scaling strategy that significantly reduces the number of iterations required to reach correct solutions. On the Comprehensive Verilog Design Problems (CVDP) benchmark, ACE-RTL achieves up to a 44.87% pass rate improvement over 14 competitive baselines while requiring only four iterations on average.

Retrieval-augmented QA pipelines often route retrieved passages through an LLM rewriter before a smaller reader, lifting F1 by tens of points on multi-hop benchmarks; this gain is typically credited to improved evidence quality. We ask whether that lift is causally driven by the gold answer string appearing in the rewritten context rather than by curation per se, using a controlled intervention audit. For each rewritten context we re-run the reader after one of four controlled edits to the compile output: removing the gold answer span, replacing a length-matched random non-answer span (placebo), or injecting the gold into rewrites where it was absent (at the prefix or at a midpoint sentence boundary). Across twelve completed (cell, baseline) intervention runs spanning three reader families (Qwen2.5-7B, Qwen3.5-35B, GLM-4.7), two datasets (HotpotQA, 2WikiMultihopQA), and three compiler arrangements (MA-only, MB-only, MA+verify), removing the gold answer drops reader F1 by 28 to 64 points beyond the length-matched placebo on paired answer-in-compile strata, and prepending the gold into rewrites that lacked it raises F1 by +0.7 to +9.7 points in 10 of 12 (cell, baseline) combinations. A companion five-sentinel audit shows the conventional single-[MASK] probe is itself sentinel-fragile: on 2Wiki it reports a +4.12~F1 ``non-leakage residual'' that flips to -3.33 to -7.81~F1 under four alternative sentinels and fails an equivalence test for three of those four (1/4~pass). We do not propose a new rewriter or mitigation; we release the intervention runner and the sentinel panel so that other rewriter-gain claims can be tested against the same standard.

We show that transformer-based large language models are computationally universal when augmented with an external memory. Any deterministic language model that conditions on strings of bounded length is equivalent to a finite automaton, hence computationally limited. However, augmenting such models with a read-write memory creates the possibility of processing arbitrarily large inputs and, potentially, simulating any algorithm. We establish that an existing large language model, Flan-U-PaLM 540B, can be combined with an associative read-write memory to exactly simulate the execution of a universal Turing machine, U_{15,2}. A key aspect of the finding is that it does not require any modification of the language model weights. Instead, the construction relies solely on designing a form of stored instruction computer that can subsequently be programmed with a specific set of prompts.

Automating Register Transfer Level (RTL) code generation using Large Language Models (LLMs) offers substantial promise for streamlining digital circuit design and reducing human effort. However, current LLM-based approaches face significant challenges with training data scarcity, poor specification-code alignment, lack of verification mechanisms, and balancing generalization with specialization. Inspired by DeepSeek-R1, we introduce VeriReason, a framework integrating supervised fine-tuning with Guided Reward Proximal Optimization (GRPO) reinforcement learning for RTL generation. Using curated training examples and a feedback-driven reward model, VeriReason combines testbench evaluations with structural heuristics while embedding self-checking capabilities for autonomous error correction. On the VerilogEval Benchmark, VeriReason delivers significant improvements: achieving 83.1% functional correctness on the VerilogEval Machine benchmark, substantially outperforming both comparable-sized models and much larger commercial systems like GPT-4 Turbo. Additionally, our approach demonstrates up to a 2.8X increase in first-attempt functional correctness compared to baseline methods and exhibits robust generalization to unseen designs. To our knowledge, VeriReason represents the first system to successfully integrate explicit reasoning capabilities with reinforcement learning for Verilog generation, establishing a new state-of-the-art for automated RTL synthesis. The models and datasets are available at: https://huggingface.co/collections/AI4EDA-CASE Code is Available at: https://github.com/NellyW8/VeriReason

Reverse-mode differentiation is used for optimization, but it introduces references, which break the purity of the underlying programs, making them notoriously harder to optimize. We present a reverse-mode differentiation on a purely functional language with array operations. It is the first one to deliver a provably efficient, purely functional, and denotationally correct reverse-mode differentiation. We show that our transformation is semantically correct and verifies the cheap gradient principle. Inspired by PROPs and compilation to categories, we introduce a novel intermediate representation that we call 'unary form'. Our reverse-mode transformation is factored as a compilation scheme through this intermediate representation. We obtain provably efficient gradients by performing general partial evaluation optimizations after our reverse-mode transformation, as opposed to manually derived ones. For simple first-order programs, the obtained output programs resemble static-single-assignment (SSA) code. We emphasize the modularity of our approach and show how our language can easily be enriched with more optimized primitives, as required for some speed-ups in practice.

We propose LGGPT, an LLM-based model tailored for unified layout generation. First, we propose Arbitrary Layout Instruction (ALI) and Universal Layout Response (ULR) as the uniform I/O template. ALI accommodates arbitrary layout generation task inputs across multiple layout domains, enabling LGGPT to unify both task-generic and domain-generic layout generation hitherto unexplored. Collectively, ALI and ULR boast a succinct structure that forgoes superfluous tokens typically found in existing HTML-based formats, facilitating efficient instruction tuning and boosting unified generation performance. In addition, we propose an Interval Quantization Encoding (IQE) strategy that compresses ALI into a more condensed structure. IQE precisely preserves valid layout clues while eliminating the less informative placeholders, facilitating LGGPT to capture complex and variable layout generation conditions during the unified training process. Experimental results demonstrate that LGGPT achieves superior or on par performance compared to existing methods. Notably, LGGPT strikes a prominent balance between proficiency and efficiency with a compact 1.5B parameter LLM, which beats prior 7B or 175B models even in the most extensive and challenging unified scenario. Furthermore, we underscore the necessity of employing LLMs for unified layout generation and suggest that 1.5B could be an optimal parameter size by comparing LLMs of varying scales. Code is available at https://github.com/NiceRingNode/LGGPT.

We present Forge-UGC (FX Optimization and Register-Graph Engine for Universal Graph Compilation), a four-phase compiler for transformer deployment on heterogeneous accelerator hardware, validated on Intel AI Boost NPU. Existing frameworks such as OpenVINO and ONNX Runtime often use opaque compilation pipelines, limited pass-level visibility, and weak buffer management, which can lead to higher compilation cost and runtime overhead. Forge-UGC addresses this with a hardware-agnostic design that separates graph capture, optimization, intermediate representation lowering, and backend scheduling. Phase 1 captures graphs with torch.export at the ATen operator level, supporting modern transformer components such as rotary position embeddings, grouped-query attention, and SwiGLU without manual decomposition. Phase 2 applies six optimization passes: dead code elimination, common subexpression elimination, constant folding, attention fusion, operator fusion, and layout optimization, reducing graph node count by 14.2 to 21.9%. Phase 3 lowers the optimized graph into a typed intermediate representation with explicit virtual register assignments. Phase 4 performs liveness analysis, linear-scan buffer allocation, reducing peak buffer count by 30 to 48%, and device-affinity scheduling, reducing NPU-CPU transitions by 42 to 65%. Across six model families ranging from 125M to 8B parameters, evaluated on WikiText-103 and GLUE, Forge-UGC delivers 6.9 to 9.2x faster compilation than OpenVINO and ONNX Runtime, 18.2 to 35.7% lower inference latency, and 30.2 to 40.9% lower energy per inference. Fidelity is preserved, with max absolute logit differences below 2.1e-5 and KL divergence below 8.4e-9. We also introduce Fusion Gain Ratio, Compilation Efficiency Index, and per-pass execution profiling for systematic evaluation of NPU compilation pipelines.

Automated testbench generation has become a critical bottleneck in large language model (LLM)-driven Register Transfer Level (RTL) workflows, where large numbers of candidate designs must be verified rapidly and reliably. Existing prompt-based approaches treat testbench generation as unconstrained code synthesis, yielding stochastic outputs with high token cost, low reproducibility, and insufficient coverage. To address this gap, we present STG, a Structured Testbench Generation framework that exploits the inherent structure of hardware designs to generate deterministic testbenches. As a direct verification tool, STG runs 720x faster than an iterative LLM-based testbench generation flow and higher rate of successful compilation, achieves higher coverage, and reduces false-pass verdicts on incorrect DUTs. STG also helps identify errors in RTL generation benchmarks by exposing faulty benchmark testbenches. As a data curation engine, it is 11x faster than LLM-based filtering on a single CPU core with 127x less energy, and the resulting distilled models provide state-of-the-art performance in our multi-benchmark evaluation. As a test-time scaling oracle, it reduces node count by 14-47\%. Our models are available at https://huggingface.co/collections/AS-SiliconMind/siliconmind-v12.

Enhancing the instruction-following ability of Large Language Models (LLMs) primarily demands substantial instruction-tuning datasets. However, the sheer volume of these imposes a considerable computational burden and annotation cost. To investigate a label-efficient instruction tuning method that allows the model itself to actively sample subsets that are equally or even more effective, we introduce a self-evolving mechanism DiverseEvol. In this process, a model iteratively augments its training subset to refine its own performance, without requiring any intervention from humans or more advanced LLMs. The key to our data sampling technique lies in the enhancement of diversity in the chosen subsets, as the model selects new data points most distinct from any existing ones according to its current embedding space. Extensive experiments across three datasets and benchmarks demonstrate the effectiveness of DiverseEvol. Our models, trained on less than 8% of the original dataset, maintain or improve performance compared with finetuning on full data. We also provide empirical evidence to analyze the importance of diversity in instruction data and the iterative scheme as opposed to one-time sampling. Our code is publicly available at https://github.com/OFA-Sys/DiverseEvol.git.

Constant bit-size Transformers are known to be Turing complete, but existing constructions require Ω(s(n)) chain-of-thought (CoT) steps per simulated Turing machine (TM) step, leading to impractical reasoning lengths. In this paper, we significantly reduce this efficiency gap by proving that any (t(n),s(n))-bounded multi-tape TM can be simulated by a constant bit-size Transformer with an optimal O(s(n))-long context window and only O(s(n)^c) CoT steps per TM step, where c>0 can be made arbitrarily small by letting the Transformers' head-layer product sufficiently large. In addition, our construction shows that sparse attention with fixed geometric offsets suffices for efficient universal computation. Our proof leverages multi-queue TMs as a bridge. The main technical novelty is a more efficient simulation of multi-tape TMs by synchronous multi-queue TMs, improving both time and space complexity under stricter model assumptions.

Large language models have demonstrated the ability to generate both natural language and programming language text. Such models open up the possibility of multi-language code generation: could code generation models generalize knowledge from one language to another? Although contemporary code generation models can generate semantically correct Python code, little is known about their abilities with other languages. We propose MultiPL-E, a system for translating unit test-driven code generation benchmarks to new languages. We create the first massively multilingual code generation benchmark by using MultiPL-E to translate two popular Python code generation benchmarks to 18 additional programming languages. We use MultiPL-E to extend the HumanEval benchmark and MBPP benchmark to 18 languages that encompass a range of programming paradigms and popularity. Using these new parallel benchmarks, we evaluate the multi-language performance of three state-of-the-art code generation models: Codex, CodeGen, and InCoder. We find that Codex matches or even exceeds its performance on Python for several other languages. The range of programming languages represented in MultiPL-E allow us to explore the impact of language frequency and language features on model performance. Finally, the MultiPL-E approach of compiling code generation benchmarks to new programming languages is both scalable and extensible, making it straightforward to evaluate new models, benchmarks, and languages.