Daily Papers

Fashion attribute extraction is evaluated inconsistently: results are reported as single aggregate numbers across image types that pose different problems, fields that are not visible in an image are scored as ordinary negatives, and the effect of vocabulary mismatch between datasets is acknowledged but not measured. We release the MODA General Attribute Suite, a four-track benchmark that keeps these problems separate by construction. Each track (localized garment crops, catalogue product images, applicability-aware full-body photographs, and product text) carries its own frozen test set, input contract, metric, and leakage unit, and the tracks are never averaged. The protocol requires label-blind prediction, SHA-256 commitment of prediction files before any label is opened, a fail-closed scorer, and a 10,000-sample paired cluster bootstrap at each track's natural leakage unit; promotion requires a positive interval on every track rather than a favourable mean. We release the scorers, the split builders, our own prediction files with their hashes including the runs we lose, and the MODA_NER(V) model checkpoints for three of the four tracks. The text model is not distributed; its benchmark is. We report baseline results, six interventions that did not improve them, and the limitations of the evidence.

This paper presents TurnTurk-GPT, a text-based turn-taking predictor for Turkish obtained by fine-tuning a Turkish GPT-2 model with the TurnGPT objective on synthetic and real dialogue, and evaluates it on real Turkish conversation against rule baselines, a zero-shot Turkish language model and a widely used multilingual end-of-turn detector. Evaluation uses word-level decision points on unpunctuated, lower-cased text approximating the output of streaming speech recognisers, recording-disjoint and speaker-disjoint folds, nested threshold selection and paired cluster bootstrap tests. TurnTurk-GPT outperforms the multilingual detector under both recording-disjoint and speaker-disjoint evaluation. It outperforms the zero-shot language model only when the test speakers occur in training; on unseen speakers the two are statistically indistinguishable. Removing the suffixes of the turn-final word reduces AP by up to 44%, against 2% for a sentence-internal word, locating the Turkish end-of-turn cue in verb-final morphology. Synthetic dialogue alone yields the weakest trained model, and when a speaker pauses the zero-shot and multilingual baselines remain close to chance. The model and the evaluation protocol are publicly released.

Open-ended language-model benchmarks usually inherit a judge: a human preference panel, another model, or a brittle exact-match key. We introduce FlavourBench, an automated benchmark in which a versioned culinary system supplies dense, executable ground truth. Each task presents eight ingredients and asks for a three-ingredient portfolio; before model execution, Epicure scores all 56 possible portfolios. We evaluate 27 frontier endpoints on an identical 534-task core spanning substitution, pairing, and constrained composition. Every ranked model has exactly 89 valid responses per panel and family (14,418 model-task cells total), eliminating differential missingness from the leaderboard. The FlavourBench Score is the equal-family mean of the frozen task scores. We use 50,000 anchor-cluster bootstrap replicates for simultaneous 95% score bands and 100,000 sign-flip draws for all 351 paired model contrasts, with Holm control. The two independently compiled panels correlate at r = 0.89 (rank rho = 0.80). Grok 4.6 has the largest point estimate at 65.1 (simultaneous 95% CI 61.0-69.2); 101 of 351 model pairs are resolved. The release includes the prompts, all portfolio score maps, raw responses, exact routes, content hashes, and an offline verifier that reconstructs every result.

Evaluations of LLM systems routinely average over small prompt sets and report models as a ranked table. We ask how much confidence such a table deserves, using LLM-based prompt-structure inference as the case study: eight open model variants across five families and 8B to 675B parameters, caching disabled, 293 raw intermediate representations persisted. The measured phenomenon is unstable to begin with. Identical calls do not reliably recover identical structure, with mean node-set Jaccard from 0.39 to 0.96 and 72% of prompt-model cells never node-set-perfect. Auditing the evaluation weakens its conclusions further, and this is our main contribution. Under a joint cluster bootstrap over prompts, only the bottom of the ranking is firm: the two least reproducible models hold rank in 99% and 86% of replicates, the middle four in 27% to 48%, and the top two in 68% each, so the table identifies the worst model reliably but does not reliably identify the best. Two equally defensible rules for merging repeated campaigns change four of eight rows and move the study-wide headline by 7 percentage points. Checking the inferred structure against ground-truth annotations shows reproducibility cannot be read as accuracy. And four of the eight endpoints were withdrawn within ten weeks of measurement, so the study as specified can no longer be run. Small-sample LLM evaluations can therefore look far more definitive than their evidence supports. We recommend reporting rank stability, per-cell provenance, executed sensitivity comparisons, raw per-run outputs, and a measurement date alongside any ranking.

The bootstrap is a popular data-driven method to quantify statistical uncertainty, but for modern high-dimensional problems, it could suffer from huge computational costs due to the need to repeatedly generate resamples and refit models. We study the use of bootstraps in high-dimensional environments with a small number of resamples. In particular, we show that with a recent "cheap" bootstrap perspective, using a number of resamples as small as one could attain valid coverage even when the dimension grows closely with the sample size, thus strongly supporting the implementability of the bootstrap for large-scale problems. We validate our theoretical results and compare the performance of our approach with other benchmarks via a range of experiments.

Spectral clustering is a leading clustering method. Two of its major shortcomings are the disjoint optimization process and the limited representation capacity. To address these issues, we propose a deep spectral clustering model (named BootSC), which jointly learns all stages of spectral clustering -- affinity matrix construction, spectral embedding, and k-means clustering -- using a single network in an end-to-end manner. BootSC leverages effective and efficient optimal-transport-derived supervision to bootstrap the affinity matrix and the cluster assignment matrix. Moreover, a semantically-consistent orthogonal re-parameterization technique is introduced to orthogonalize spectral embeddings, significantly enhancing the discrimination capability. Experimental results indicate that BootSC achieves state-of-the-art clustering performance. For example, it accomplishes a notable 16\% NMI improvement over the runner-up method on the challenging ImageNet-Dogs dataset. Our code is available at https://github.com/spdj2271/BootSC.

Sequential trial emulation (STE) estimates the effect of a sustained treatment by stacking nested emulated trials with inverse-probability weighting. Additive-hazards STE estimators of the marginal risk difference recommend the nonparametric bootstrap without evaluating its coverage. Using a correctly-specifiable mechanism (up to a small, disclosed residual), we compare analytic and bootstrap standard errors for both estimands. Exploiting the closed-form linearity of the additive-hazards estimating equation, we derive the influence functions and prove the default row-level robust variance inconsistent for the marginal risk-difference curve, and show the same failure empirically for the constant hazard difference: the row-level variance omits a within-subject cross-trial covariance that is positive under a sign condition we verify across our mechanisms, and is anticonservative at every horizon except the first - only there, where the covariance is zero, is the row-level standard error unimpaired. The subject-clustered variance and multiplier bootstrap are consistent for the fixed-weight linearisation and support simultaneous confidence bands, whose measured coverage is 0.88. Across our simulations the model-based and row-level robust intervals are anticonservative and worsen with sample size, coverage falling to 0.71 at n=5000; clustering leaves the constant-hazard-difference coverage near 0.86 at n=5000, and the multiplier bootstrap leaves the risk-difference-curve coverage near 0.90 (0.86 at the longest horizon). The STE constant hazard difference is a design-weighted summary of a time-varying effect, dependent on the trial structure. We illustrate on the Stanford heart transplant data and provide them in the steCI R package.

Testing equality of two high-dimensional covariance matrices is challenging when many entries differ only slightly. Dependence among sample covariance entries can also affect the finite-sample size and power of tests that aggregate their differences. We propose a studentized ell_2-type statistic that averages squared, marginally standardized differences between corresponding entries of the two sample covariance matrices. Before constructing the statistic, we apply the same nonsingular linear transformation to both samples. In the transformed coordinates, the covariance-equality hypothesis is unchanged, whereas the standardized differences and correlations among their estimators generally change. The transformation can therefore incorporate structural or scientific information without reducing dimension. We approximate the null distribution using a Gaussian multiplier bootstrap that uses coordinatewise studentization and avoids forming or inverting the full covariance matrix of the vectorized sample covariance entries. For deterministic transformations, we derive nonasymptotic Gaussian and bootstrap approximation bounds and establish asymptotic size validity and power consistency. We also show that replacing a population transformation by a same-sample estimator leaves the statistic and bootstrap critical value asymptotically unchanged in relative terms under an operator-norm convergence condition. Simulations show that suitable transformations improve size accuracy and power under weak dependence. An analysis of breast cancer gene-expression data illustrates the method.

This paper presents algorithms for hierarchical, agglomerative clustering which perform most efficiently in the general-purpose setup that is given in modern standard software. Requirements are: (1) the input data is given by pairwise dissimilarities between data points, but extensions to vector data are also discussed (2) the output is a "stepwise dendrogram", a data structure which is shared by all implementations in current standard software. We present algorithms (old and new) which perform clustering in this setting efficiently, both in an asymptotic worst-case analysis and from a practical point of view. The main contributions of this paper are: (1) We present a new algorithm which is suitable for any distance update scheme and performs significantly better than the existing algorithms. (2) We prove the correctness of two algorithms by Rohlf and Murtagh, which is necessary in each case for different reasons. (3) We give well-founded recommendations for the best current algorithms for the various agglomerative clustering schemes.

Many language-based applications need a probability distribution over a small set of decisions rather than an open-ended response. We present Chinese Decision, a family of Chinese-language decision models that adapts pretrained causal language models to this interface. Each question is compiled into a shared instruction-and-candidate prompt; a single forward pass reads the final-position logits of the candidate letters and normalizes them over the valid options, without autoregressive answer generation. The interface covers Boolean judgments, categorical choices, and ordinal scores. We report three completed members built on Qwen3.5 0.8B, 2B, and 4B backbones, each trained for one epoch on the same 13.048 million decisions and released with a validation-fitted temperature and a Q8_0 quantization. On the full 307,900-decision CJ-Bench, the 4B model reaches 85.97% overall accuracy, 75.69% general-domain accuracy, and 84.00% average accuracy across medicine, law, and finance with a single checkpoint, above every reported baseline in each domain, at 1.00% expected calibration error. Between the 2B and 4B members, which share data, objective, and minimum batch, parent-clustered paired bootstrap intervals show gains in all four domains, largest in the two low-resource domains (+8.5 and +7.1 points), whereas the 2B gain over 0.8B in law is not statistically resolved. Analyses of the stored predictions further show that a single global temperature lowers pooled calibration error while worsening some domains, that larger members rank their own errors better for selective prediction, and that merging and quantization each change 0.4-1.1% of top-1 predictions while leaving aggregate metrics nearly unchanged. All comparisons rest on single training runs and imported baselines.

We extend molecular bootstrap embedding to make it appropriate for implementation on a quantum computer. This enables solution of the electronic structure problem of a large molecule as an optimization problem for a composite Lagrangian governing fragments of the total system, in such a way that fragment solutions can harness the capabilities of quantum computers. By employing state-of-art quantum subroutines including the quantum SWAP test and quantum amplitude amplification, we show how a quadratic speedup can be obtained over the classical algorithm, in principle. Utilization of quantum computation also allows the algorithm to match -- at little additional computational cost -- full density matrices at fragment boundaries, instead of being limited to 1-RDMs. Current quantum computers are small, but quantum bootstrap embedding provides a potentially generalizable strategy for harnessing such small machines through quantum fragment matching.

This paper introduces a structural equation formulation that gives rise to a new family of quasi-periodic Gaussian processes, useful to process a broad class of natural and physiological signals. The proposed formulation simplifies generation and forecasting, and provides hyperparameter estimates, which we exploit in a convergent and consistent iterative estimation algorithm. A bootstrap approach for standard error estimation and confidence intervals is also provided. We demonstrate the computational and scaling benefits of the proposed approach on a broad class of problems, including water level tidal analysis, CO_{2} emission data, and sunspot numbers data. By leveraging the structural equations, our method reduces the cost of likelihood evaluations and predictions from O(k^2 p^2) to O(p^2), significantly improving scalability.

Time series clustering promises to uncover hidden structural patterns in data with applications across healthcare, finance, industrial systems, and other critical domains. However, without validated ground truth information, researchers cannot objectively assess clustering quality or determine whether poor results stem from absent structures in the data, algorithmic limitations, or inappropriate validation methods, raising the question whether clustering is "more art than science" (Guyon et al., 2009). To address these challenges, we introduce CSTS (Correlation Structures in Time Series), a synthetic benchmark for evaluating the discovery of correlation structures in multivariate time series data. CSTS provides a clean benchmark that enables researchers to isolate and identify specific causes of clustering failures by differentiating between correlation structure deterioration and limitations of clustering algorithms and validation methods. Our contributions are: (1) a comprehensive benchmark for correlation structure discovery with distinct correlation structures, systematically varied data conditions, established performance thresholds, and recommended evaluation protocols; (2) empirical validation of correlation structure preservation showing moderate distortion from downsampling and minimal effects from distribution shifts and sparsification; and (3) an extensible data generation framework enabling structure-first clustering evaluation. A case study demonstrates CSTS's practical utility by identifying an algorithm's previously undocumented sensitivity to non-normal distributions, illustrating how the benchmark enables precise diagnosis of methodological limitations. CSTS advances rigorous evaluation standards for correlation-based time series clustering.

Evaluating large language models at scale remains a practical bottleneck for many organizations. While existing evaluation frameworks work well for thousands of examples, they struggle when datasets grow to hundreds of thousands or millions of samples. This scale is common when assessing model behavior across diverse domains or conducting comprehensive regression testing. We present Spark-LLM-Eval, a distributed evaluation framework built natively on Apache Spark. The system treats evaluation as a data-parallel problem, partitioningexamplesacrossexecutorsandaggregatingresultswithproperstatistical accounting. Beyond raw throughput, we emphasize statistical rigor: every reported metric includes bootstrap confidence intervals, and model comparisons come with appropriate significance tests (paired t-tests, McNemar's test, or Wilcoxon signed-rank, depending on the metric type). The framework also addresses the cost problem inherent in LLM evaluation through content-addressable response caching backed by Delta Lake, which allows iterating on metric definitions without re-running inference. We describe the system architecture, the statistical methodology, and report benchmark results showing linear scaling with cluster size. The framework and all evaluation code are available as open source.

Pairwise clustering, in general, partitions a set of items via a known similarity function. In our treatment, clustering is modeled as a transductive prediction problem. Thus rather than beginning with a known similarity function, the function instead is hidden and the learner only receives a random sample consisting of a subset of the pairwise similarities. An additional set of pairwise side-information may be given to the learner, which then determines the inductive bias of our algorithms. We measure performance not based on the recovery of the hidden similarity function, but instead on how well we classify each item. We give tight bounds on the number of misclassifications. We provide two algorithms. The first algorithm SACA is a simple agglomerative clustering algorithm which runs in near linear time, and which serves as a baseline for our analyses. Whereas the second algorithm, RGCA, enables the incorporation of side-information which may lead to improved bounds at the cost of a longer running time.

Learning causal graphs from multivariate time series is a ubiquitous challenge in all application domains dealing with time-dependent systems, such as in Earth sciences, biology, or engineering, to name a few. Recent developments for this causal discovery learning task have shown considerable skill, notably the specific time-series adaptations of the popular conditional independence-based learning framework. However, uncertainty estimation is challenging for conditional independence-based methods. Here, we introduce a novel bootstrap approach designed for time series causal discovery that preserves the temporal dependencies and lag structure. It can be combined with a range of time series causal discovery methods and provides a measure of confidence for the links of the time series graphs. Furthermore, next to confidence estimation, an aggregation, also called bagging, of the bootstrapped graphs by majority voting results in bagged causal discovery methods. In this work, we combine this approach with the state-of-the-art conditional-independence-based algorithm PCMCI+. With extensive numerical experiments we empirically demonstrate that, in addition to providing confidence measures for links, Bagged-PCMCI+ improves in precision and recall as compared to its base algorithm PCMCI+, at the cost of higher computational demands. These statistical performance improvements are especially pronounced in the more challenging settings (short time sample size, large number of variables, high autocorrelation). Our bootstrap approach can also be combined with other time series causal discovery algorithms and can be of considerable use in many real-world applications.

We present an efficient algorithm for simultaneously training sparse generalized linear models across many related problems, which may arise from bootstrapping, cross-validation and nonparametric permutation testing. Our approach leverages the redundancies across problems to obtain significant computational improvements relative to solving the problems sequentially by a conventional algorithm. We demonstrate our fast simultaneous training of generalized linear models (FaSTGLZ) algorithm on a number of real-world datasets, and we run otherwise computationally intensive bootstrapping and permutation test analyses that are typically necessary for obtaining statistically rigorous classification results and meaningful interpretation. Code is freely available at http://liinc.bme.columbia.edu/fastglz.

Non-linear interactions during inflation generate non-Gaussianities in the distribution of primordial curvature. In many theories, the physics is scale-invariant, such that the induced three-point function depends solely on a dimensionless shape function S(x,y)sim k^6B_ζ(kx,ky,k). To confront such models with observations, one typically builds specialized estimators for each shape, then applies them to cosmic microwave background datasets at significant computational expense. In this Letter, we take a different approach, directly reconstructing S(x,y) from observations using an efficient logarithmically-binned estimator in primordial-space (motivated by the modal program). Applying this to temperature and polarization maps from Planck, we obtain high-resolution shape measurements across the full (x,y)-plane, including squeezed limits. Our approach is close-to-optimal, highly interpretable, and preserves the information content on (optimally-analyzed) standard templates within approx 10%; moreover, we can use it to assess the scale-dependence of our constraints, finding that Planck is sensitive to approx 6 e-folds of non-Gaussian evolution with a peak sensitivity around 0.1h,Mpc^{-1}. Since we work directly in shape-space, data and theory can be compared in milliseconds. As an example, we perform a search for massive particle exchange using a suite of over 20,000 theoretical templates computed with exact bootstrap methods (for the first time) across a wide range of masses, spins, and sound-speeds; the spin-two analysis yields a maximum significance of 2.6σ. Our approach can be used to probe a wide range of scale-invariant models in orders-of-magnitude less time than with direct estimators, allowing the inflationary paradigm to be explored in new ways.

Clustering is a NP-hard problem. Thus, no optimal algorithm exists, heuristics are applied to cluster the data. Heuristics can be very resource-intensive, if not applied properly. For substantially large data sets computational efficiencies can be achieved by reducing the input space if a minimal loss of information can be achieved. Clustering algorithms, in general, face two common problems: 1) these converge to different settings with different initial conditions and; 2) the number of clusters has to be arbitrarily decided beforehand. This problem has become critical in the realm of big data. Recently, clustering algorithms have emerged which can speedup computations using parallel processing over the grid but face the aforementioned problems. Goals: Our goals are to find methods to cluster data which: 1) guarantee convergence to the same settings irrespective of the initial conditions; 2) eliminate the need to establish the number of clusters beforehand, and 3) can be applied to cluster large datasets. Methods: We introduce a method that combines probabilistic and combinatorial clustering methods to produce repeatable and compact clusters that are not sensitive to initial conditions. This method harnesses the power of k-means (a combinatorial clustering method) to cluster/partition very large dimensional datasets and uses the Gaussian Mixture Model (a probabilistic clustering method) to validate the k-means partitions. Results: We show that this method produces very compact clusters that are not sensitive to initial conditions. This method can be used to identify the most 'separable' set in a dataset which increases the 'clusterability' of a dataset. This method also eliminates the need to specify the number of clusters in advance.

Clustering aims to group unlabelled samples based on their similarities. It has become a significant tool for the analysis of high-dimensional data. However, most of the clustering methods merely generate pseudo labels and thus are unable to simultaneously present the similarities between different clusters and outliers. This paper proposes a new framework called High-dimensional Clustering onto Hamiltonian Cycle (HCHC) to solve the above problems. First, HCHC combines global structure with local structure in one objective function for deep clustering, improving the labels as relative probabilities, to mine the similarities between different clusters while keeping the local structure in each cluster. Then, the anchors of different clusters are sorted on the optimal Hamiltonian cycle generated by the cluster similarities and mapped on the circumference of a circle. Finally, a sample with a higher probability of a cluster will be mapped closer to the corresponding anchor. In this way, our framework allows us to appreciate three aspects visually and simultaneously - clusters (formed by samples with high probabilities), cluster similarities (represented as circular distances), and outliers (recognized as dots far away from all clusters). The experiments illustrate the superiority of HCHC.

Benchmarks of machine learning models often include many datasets, making evaluation expensive. For efficiency, it is preferable to perform evaluations on small, representative datasets instead. The selection of such subsets typically relies on heuristics and is rarely analyzed for the robustness of the resulting model rankings. We introduce a framework to perform the task of selecting datasets subsets with an evaluation of how different selection strategies preserve the global model rankings. Our framework includes bootstrap aggregation, which provides valid confidence intervals, allowing a principled comparison of selection strategies. We consider clustering, design criteria (A/D-optimality), random baselines, and greedy farthest-first (FAFI). For the latter, we derive upper bounds on selection quality in terms of ranking errors as a function of the number of selected datasets. Empirically, in time series classification (TSC, 112 datasets) and in a supplementary natural language processing benchmark derived from MTEB (57 tasks), several selection strategies improve rank preservation compared with random subsets, including simple FAFI. In contrast, in recommender systems (30 datasets), the improvement of strategies over random selection is small and typically statistically insignificant. For TSC, our best-performing strategy achieves a Spearman correlation of 0.95 with the full benchmark model rankings using only five selected datasets. Additional experiments indicate that the effectiveness of selection approaches depends on both the quality of dataset representations and the scale of the benchmarking regime.

Experiments with pre-trained models such as BERT are often based on a single checkpoint. While the conclusions drawn apply to the artifact tested in the experiment (i.e., the particular instance of the model), it is not always clear whether they hold for the more general procedure which includes the architecture, training data, initialization scheme, and loss function. Recent work has shown that repeating the pre-training process can lead to substantially different performance, suggesting that an alternate strategy is needed to make principled statements about procedures. To enable researchers to draw more robust conclusions, we introduce the MultiBERTs, a set of 25 BERT-Base checkpoints, trained with similar hyper-parameters as the original BERT model but differing in random weight initialization and shuffling of training data. We also define the Multi-Bootstrap, a non-parametric bootstrap method for statistical inference designed for settings where there are multiple pre-trained models and limited test data. To illustrate our approach, we present a case study of gender bias in coreference resolution, in which the Multi-Bootstrap lets us measure effects that may not be detected with a single checkpoint. We release our models and statistical library along with an additional set of 140 intermediate checkpoints captured during pre-training to facilitate research on learning dynamics.

Clustering is an unsupervised learning problem that aims to partition unlabelled data points into groups with similar features. Traditional clustering algorithms provide limited insight into the groups they find as their main focus is accuracy and not the interpretability of the group assignments. This has spurred a recent line of work on explainable machine learning for clustering. In this paper we focus on the cluster description problem where, given a dataset and its partition into clusters, the task is to explain the clusters. We introduce a new approach to explain clusters by constructing polyhedra around each cluster while minimizing either the complexity of the resulting polyhedra or the number of features used in the description. We formulate the cluster description problem as an integer program and present a column generation approach to search over an exponential number of candidate half-spaces that can be used to build the polyhedra. To deal with large datasets, we introduce a novel grouping scheme that first forms smaller groups of data points and then builds the polyhedra around the grouped data, a strategy which out-performs simply sub-sampling data. Compared to state of the art cluster description algorithms, our approach is able to achieve competitive interpretability with improved description accuracy.

A model involving Gaussian processes (GPs) is introduced to simultaneously handle multi-task learning, clustering, and prediction for multiple functional data. This procedure acts as a model-based clustering method for functional data as well as a learning step for subsequent predictions for new tasks. The model is instantiated as a mixture of multi-task GPs with common mean processes. A variational EM algorithm is derived for dealing with the optimisation of the hyper-parameters along with the hyper-posteriors' estimation of latent variables and processes. We establish explicit formulas for integrating the mean processes and the latent clustering variables within a predictive distribution, accounting for uncertainty on both aspects. This distribution is defined as a mixture of cluster-specific GP predictions, which enhances the performances when dealing with group-structured data. The model handles irregular grid of observations and offers different hypotheses on the covariance structure for sharing additional information across tasks. The performances on both clustering and prediction tasks are assessed through various simulated scenarios and real datasets. The overall algorithm, called MagmaClust, is publicly available as an R package.

The correct use of model evaluation, model selection, and algorithm selection techniques is vital in academic machine learning research as well as in many industrial settings. This article reviews different techniques that can be used for each of these three subtasks and discusses the main advantages and disadvantages of each technique with references to theoretical and empirical studies. Further, recommendations are given to encourage best yet feasible practices in research and applications of machine learning. Common methods such as the holdout method for model evaluation and selection are covered, which are not recommended when working with small datasets. Different flavors of the bootstrap technique are introduced for estimating the uncertainty of performance estimates, as an alternative to confidence intervals via normal approximation if bootstrapping is computationally feasible. Common cross-validation techniques such as leave-one-out cross-validation and k-fold cross-validation are reviewed, the bias-variance trade-off for choosing k is discussed, and practical tips for the optimal choice of k are given based on empirical evidence. Different statistical tests for algorithm comparisons are presented, and strategies for dealing with multiple comparisons such as omnibus tests and multiple-comparison corrections are discussed. Finally, alternative methods for algorithm selection, such as the combined F-test 5x2 cross-validation and nested cross-validation, are recommended for comparing machine learning algorithms when datasets are small.

Recent machine learning papers often report 1-2 percentage point improvements from a single run on a benchmark. These gains are highly sensitive to random seeds, data ordering, and implementation details, yet are rarely accompanied by uncertainty estimates or significance tests. It is therefore unclear when a reported +1-2% reflects a real algorithmic advance versus noise. We revisit this problem under realistic compute budgets, where only a few runs are affordable. We propose a simple, PC-friendly evaluation protocol based on paired multi-seed runs, bias-corrected and accelerated (BCa) bootstrap confidence intervals, and a sign-flip permutation test on per-seed deltas. The protocol is intentionally conservative and is meant as a guardrail against over-claiming. We instantiate it on CIFAR-10, CIFAR-10N, and AG News using synthetic no-improvement, small-gain, and medium-gain scenarios. Single runs and unpaired t-tests often suggest significant gains for 0.6-2.0 point improvements, especially on text. With only three seeds, our paired protocol never declares significance in these settings. We argue that such conservative evaluation is a safer default for small gains under tight budgets.

We study simplified bootstrap problems for probability distributions on the infinite line and the circle. We show that the rapid convergence of the bootstrap method for problems on the infinite line is related to the fact that the smallest eigenvalue of the positive matrices in the exact solution becomes exponentially small for large matrices, while the moments grow factorially. As a result, the positivity condition is very finely tuned. For problems on the circle we show instead that the entries of the positive matrix of Fourier modes of the distribution depend linearly on the initial data of the recursion, with factorially growing coefficients. By positivity, these matrix elements are bounded in absolute value by one, so the initial data must also be fine-tuned. Additionally, we find that we can largely bypass the semi-definite program (SDP) nature of the problem on a circle by recognizing that these Fourier modes must be asymptotically exponentially small. With a simple ansatz, which we call the shoestring bootstrap, we can efficiently identify an interior point of the set of allowed matrices with much higher precision than conventional SDP bounds permit. We apply this method to solving unitary matrix model integrals by numerically constructing the orthogonal polynomials associated with the circle distribution.

This paper argues for the widest possible use of bootstrap confidence intervals for comparing NLP system performances instead of the state-of-the-art status (SOTA) and statistical significance testing. Their main benefits are to draw attention to the difference in performance between two systems and to help assessing the degree of superiority of one system over another. Two cases studies, one comparing several systems and the other based on a K-fold cross-validation procedure, illustrate these benefits. A python module for obtaining these confidence intervals as well as a second function implementing the Fisher-Pitman test for paired samples are freely available on PyPi.

Assessing sampling uncertainty in extremum estimation can be challenging when the asymptotic variance is not analytically tractable. Bootstrap inference offers a feasible solution but can be computationally costly especially when the model is complex. This paper uses iterates of a specially designed stochastic optimization algorithm as draws from which both point estimates and bootstrap standard errors can be computed in a single run. The draws are generated by the gradient and Hessian computed from batches of data that are resampled at each iteration. We show that these draws yield consistent estimates and asymptotically valid frequentist inference for a large class of regular problems. The algorithm provides accurate standard errors in simulation examples and empirical applications at low computational costs. The draws from the algorithm also provide a convenient way to detect data irregularities.

We introduce fast algorithms for correlation clustering with respect to the Min Max objective that provide constant factor approximations on complete graphs. Our algorithms are the first purely combinatorial approximation algorithms for this problem. We construct a novel semi-metric on the set of vertices, which we call the correlation metric, that indicates to our clustering algorithms whether pairs of nodes should be in the same cluster. The paper demonstrates empirically that, compared to prior work, our algorithms sacrifice little in the objective quality to obtain significantly better run-time. Moreover, our algorithms scale to larger networks that are effectively intractable for known algorithms.

We use tools from geometric statistics to analyze the usual estimation procedure of a template shape. This applies to shapes from landmarks, curves, surfaces, images etc. We demonstrate the asymptotic bias of the template shape estimation using the stratified geometry of the shape space. We give a Taylor expansion of the bias with respect to a parameter sigma describing the measurement error on the data. We propose two bootstrap procedures that quantify the bias and correct it, if needed. They are applicable for any type of shape data. We give a rule of thumb to provide intuition on whether the bias has to be corrected. This exhibits the parameters that control the bias' magnitude. We illustrate our results on simulated and real shape data.

Text embeddings for Portuguese have no dedicated benchmark: evaluation rests on translated corpora such as English MS MARCO or on thin multilingual coverage, with native tasks scattered and unconsolidated. We introduce MTEB-PT, a benchmark of 22 native Brazilian-Portuguese tasks across seven categories (classification, multilabel classification, pair classification, semantic textual similarity, clustering, retrieval, and reranking), admitting only data created or found in Portuguese and excluding translations by construction. We evaluate 93 models spanning 23M to 27B parameters: 73 open-weight and 20 closed commercial APIs. Alongside the leaderboard we report a statistical layer for every headline comparison: per-task bootstrap confidence intervals, paired-bootstrap significance, a task- and instance-level discrimination analysis (how sharply each task separates models) adapted from Item Response Theory, and a cross-leaderboard correlation. Three findings stand out. The benchmark cleanly separates about a dozen tiers of models, though the top six are statistically too close to order. An openly licensed, self-hostable model reaches that leading tier, so strong Portuguese embedding quality does not require a commercial API. And a model's rank on the global multilingual leaderboard predicts its Portuguese rank only moderately (Spearman rho = 0.75 over 55 shared models; one model ranks 3rd there and 49th here), so a native benchmark measures something the multilingual boards do not. We release every task, our code, and a public leaderboard, so practitioners can choose Portuguese embedding models on native evidence.

Clustering is a widely deployed unsupervised learning tool. Model-based clustering is a flexible framework to tackle data heterogeneity when the clusters have different shapes. Likelihood-based inference for mixture distributions often involves non-convex and high-dimensional objective functions, imposing difficult computational and statistical challenges. The classic expectation-maximization (EM) algorithm is a computationally thrifty iterative method that maximizes a surrogate function minorizing the log-likelihood of observed data in each iteration, which however suffers from bad local maxima even in the special case of the standard Gaussian mixture model with common isotropic covariance matrices. On the other hand, recent studies reveal that the unique global solution of a semidefinite programming (SDP) relaxed K-means achieves the information-theoretically sharp threshold for perfectly recovering the cluster labels under the standard Gaussian mixture model. In this paper, we extend the SDP approach to a general setting by integrating cluster labels as model parameters and propose an iterative likelihood adjusted SDP (iLA-SDP) method that directly maximizes the exact observed likelihood in the presence of data heterogeneity. By lifting the cluster assignment to group-specific membership matrices, iLA-SDP avoids centroids estimation -- a key feature that allows exact recovery under well-separateness of centroids without being trapped by their adversarial configurations. Thus iLA-SDP is less sensitive than EM to initialization and more stable on high-dimensional data. Our numeric experiments demonstrate that iLA-SDP can achieve lower mis-clustering errors over several widely used clustering methods including K-means, SDP and EM algorithms.

We study numerically the 6D (2,0) superconformal bootstrap using the soft-Actor-Critic (SAC) algorithm as a stochastic optimizer. We focus on the four-point functions of scalar superconformal primaries in the energy-momentum multiplet. Starting from the supergravity limit, we perform searches for adiabatically varied central charges and derive two curves for a collection of 80 CFT data (70 of these data correspond to unprotected long multiplets and 10 to protected short multiplets). We conjecture that the two curves capture the A- and D-series (2,0) theories. Our results are competitive when compared to the existing bounds coming from standard numerical bootstrap methods, and data obtained using the OPE inversion formula. With this paper we are also releasing our Python implementation of the SAC algorithm, BootSTOP. The paper discusses the main functionality features of this package.

Local graph clustering methods aim to detect small clusters in very large graphs without the need to process the whole graph. They are fundamental and scalable tools for a wide range of tasks such as local community detection, node ranking and node embedding. While prior work on local graph clustering mainly focuses on graphs without node attributes, modern real-world graph datasets typically come with node attributes that provide valuable additional information. We present a simple local graph clustering algorithm for graphs with node attributes, based on the idea of diffusing mass locally in the graph while accounting for both structural and attribute proximities. Using high-dimensional concentration results, we provide statistical guarantees on the performance of the algorithm for the recovery of a target cluster with a single seed node. We give conditions under which a target cluster generated from a fairly general contextual random graph model, which includes both the stochastic block model and the planted cluster model as special cases, can be fully recovered with bounded false positives. Empirically, we validate all theoretical claims using synthetic data, and we show that incorporating node attributes leads to superior local clustering performances using real-world graph datasets.

Multimodal representations enable zero-shot classification and retrieval, but aligning independently trained models usually requires large amounts of paired data. Yet, the Platonic Representation Hypothesis suggests that models trained on different modalities may converge spontaneously toward a shared representation geometry. But then, do we even need paired examples for cross-modal alignment? Remarkably, we show that paired examples are unnecessary for coarse cross-modal alignment. Our simple Wasserstein Procrustes method with a coarse geometric initialization aligns two disjoint embedding sets by estimating a single orthogonal map without seeing any pairs. Across datasets, modalities, and unimodal models, we show that we can consistently align independently trained representations without pairs, and standard geometric alignment metrics accurately predict when this is possible. Nevertheless, we can naturally benefit from paired examples. In the very few-pair regime, our method substantially outperforms existing ones, while staying competitive with pair-based methods with more added examples. Finally, we demonstrate that the resulting alignments can enable text-to-image generation without paired examples. These results show that independently trained models often share enough geometry to establish cross-modal correspondence with little or no paired data.

We report that model quantisation restructures domain-level metacognitive efficiency in LLMs rather than degrading it uniformly. Evaluating Llama-3-8B-Instruct on the same 3,000 questions at Q5_K_M and f16 precision, we find that M-ratio profiles across four knowledge domains are uncorrelated between formats (Spearman rho = 0.00). Arts & Literature moves from worst-monitored (M-ratio = 0.606 at Q5_K_M) to best-monitored (1.542 at f16). Geography moves from well-monitored (1.210) to under-monitored (0.798). However, Type-2 AUROC profiles are perfectly stable across formats (rho = 1.00), localising the restructuring to the M-ratio normalisation rather than the underlying discrimination signal. This finding emerged from a pre-registered attempt to improve metacognition through domain-conditional training. We prescribed confidence-amplification SFT for the diagnosed weak domain, with matched-budget agnostic and wrong-prescription controls. All four confirmatory hypotheses were null (10,000 bootstrap resamples, seed = 42). The training successfully reshaped confidence distributions, doubling the NLP gap in Science from 0.076 to 0.152, but did not improve meta-d' because the diagnostic profile did not transfer across formats. Any system relying on domain-level M-ratio profiles has an unexamined dependency on inference format. Systems using AUROC_2 are safer. We release all code, pre-registrations, and trial-level data.

Large language models (LLMs) are increasingly deployed for tabular question answering, yet calibration on structured data is largely unstudied. This paper presents the first systematic comparison of five confidence estimation methods across five frontier LLMs and two tabular QA benchmarks. All models are severely overconfident (smooth ECE 0.35-0.64 versus 0.10-0.15 reported for textual QA). A consistent self-evaluation versus perturbation dichotomy replicates across both benchmarks and all four fully-covered models: self-evaluation methods (verbalized, P(True)) achieve AUROC 0.42-0.76, while perturbation methods (semantic entropy, self-consistency, and our Multi-Format Agreement) achieve AUROC 0.78-0.86. Per-model paired bootstrap tests reject the null at p<0.001 after Holm-Bonferroni correction, and a 3-seed check on GPT-4o-mini gives a per-seed standard deviation of only 0.006. The paper proposes Multi-Format Agreement (MFA), which exploits the lossless and deterministic serialization variation unique to structured data (Markdown, HTML, JSON, CSV) to estimate confidence at 20% lower API cost than sampling baselines. MFA reduces ECE by 44-63%, generalizes across all four models on TableBench (mean AUROC 0.80), and combines complementarily with sampling: an MFA + self-consistency ensemble lifts AUROC from 0.74 to 0.82. A secondary contribution, structure-aware recalibration, improves AUROC by +10 percentage points over standard post-hoc methods.

We report the discovery of bimodal structure in the drift rate distribution of upward-drifting burst clusters from the hyperactive repeating fast radio burst FRB 20240114A. Using unsupervised machine learning (UMAP dimensionality reduction combined with HDBSCAN density-based clustering) applied to 233 upward-drifting burst clusters from the FAST telescope dataset, we identify a distinct subpopulation of 45 burst clusters (Cluster C1) with mean drift rates 2.5x higher than typical upward-drifting burst clusters (245.6 vs 98.1 MHz/ms). Gaussian mixture modeling reveals strong evidence for bimodality (delta-BIC = 296.6), with clearly separated modes (Ashman's D = 2.70 > 2) and a statistically significant gap in the distribution (11.3 sigma). Crucially, we demonstrate that this bimodality persists when restricting the analysis to single-component (U1) burst clusters only (delta-BIC = 19.9, Ashman's D = 2.71), confirming that the result is not an artifact of combining single- and multi-component burst clusters with different drift rate definitions. The extreme-drift subpopulation also exhibits systematically lower peak frequencies (-7%), shorter durations (-29%), and distinct clustering in multi-dimensional feature space. These findings are suggestive of two spatially separated emission regions in the magnetosphere, each producing upward-drifting burst clusters with distinct physical characteristics, although confirmation requires observations from additional epochs and sources.

The problem of Novel Class Discovery (NCD) consists in extracting knowledge from a labeled set of known classes to accurately partition an unlabeled set of novel classes. While NCD has recently received a lot of attention from the community, it is often solved on computer vision problems and under unrealistic conditions. In particular, the number of novel classes is usually assumed to be known in advance, and their labels are sometimes used to tune hyperparameters. Methods that rely on these assumptions are not applicable in real-world scenarios. In this work, we focus on solving NCD in tabular data when no prior knowledge of the novel classes is available. To this end, we propose to tune the hyperparameters of NCD methods by adapting the k-fold cross-validation process and hiding some of the known classes in each fold. Since we have found that methods with too many hyperparameters are likely to overfit these hidden classes, we define a simple deep NCD model. This method is composed of only the essential elements necessary for the NCD problem and performs impressively well under realistic conditions. Furthermore, we find that the latent space of this method can be used to reliably estimate the number of novel classes. Additionally, we adapt two unsupervised clustering algorithms (k-means and Spectral Clustering) to leverage the knowledge of the known classes. Extensive experiments are conducted on 7 tabular datasets and demonstrate the effectiveness of the proposed method and hyperparameter tuning process, and show that the NCD problem can be solved without relying on knowledge from the novel classes.

Pre-training datasets are typically collected from web content and lack inherent domain divisions. For instance, widely used datasets like Common Crawl do not include explicit domain labels, while manually curating labeled datasets such as The Pile is labor-intensive. Consequently, identifying an optimal pre-training data mixture remains a challenging problem, despite its significant benefits for pre-training performance. To address these challenges, we propose CLustering-based Iterative Data Mixture Bootstrapping (CLIMB), an automated framework that discovers, evaluates, and refines data mixtures in a pre-training setting. Specifically, CLIMB embeds and clusters large-scale datasets in a semantic space and then iteratively searches for optimal mixtures using a smaller proxy model and a predictor. When continuously trained on 400B tokens with this mixture, our 1B model exceeds the state-of-the-art Llama-3.2-1B by 2.0%. Moreover, we observe that optimizing for a specific domain (e.g., Social Sciences) yields a 5% improvement over random sampling. Finally, we introduce ClimbLab, a filtered 1.2-trillion-token corpus with 20 clusters as a research playground, and ClimbMix, a compact yet powerful 400-billion-token dataset designed for efficient pre-training that delivers superior performance under an equal token budget. We analyze the final data mixture, elucidating the characteristics of an optimal data mixture. Our data is available at: https://research.nvidia.com/labs/lpr/climb/

Visual clustering is a common perceptual task in scatterplots that supports diverse analytics tasks (e.g., cluster identification). However, even with the same scatterplot, the ways of perceiving clusters (i.e., conducting visual clustering) can differ due to the differences among individuals and ambiguous cluster boundaries. Although such perceptual variability casts doubt on the reliability of data analysis based on visual clustering, we lack a systematic way to efficiently assess this variability. In this research, we study perceptual variability in conducting visual clustering, which we call Cluster Ambiguity. To this end, we introduce CLAMS, a data-driven visual quality measure for automatically predicting cluster ambiguity in monochrome scatterplots. We first conduct a qualitative study to identify key factors that affect the visual separation of clusters (e.g., proximity or size difference between clusters). Based on study findings, we deploy a regression module that estimates the human-judged separability of two clusters. Then, CLAMS predicts cluster ambiguity by analyzing the aggregated results of all pairwise separability between clusters that are generated by the module. CLAMS outperforms widely-used clustering techniques in predicting ground truth cluster ambiguity. Meanwhile, CLAMS exhibits performance on par with human annotators. We conclude our work by presenting two applications for optimizing and benchmarking data mining techniques using CLAMS. The interactive demo of CLAMS is available at clusterambiguity.dev.

Deep clustering has exhibited remarkable performance; however, the overconfidence problem, i.e., the estimated confidence for a sample belonging to a particular cluster greatly exceeds its actual prediction accuracy, has been overlooked in prior research. To tackle this critical issue, we pioneer the development of a calibrated deep clustering framework. Specifically, we propose a novel dual-head deep clustering pipeline that can effectively calibrate the estimated confidence and the actual accuracy. The calibration head adjusts the overconfident predictions of the clustering head using regularization methods, generating prediction confidence and pseudo-labels that match the model learning status. This calibration process also guides the clustering head in dynamically selecting reliable high-confidence samples for training. Additionally, we introduce an effective network initialization strategy that enhances both training speed and network robustness. Extensive experiments demonstrate the proposed calibrated deep clustering framework not only surpasses state-of-the-art deep clustering methods by approximately 10 times in terms of expected calibration error but also significantly outperforms them in terms of clustering accuracy.

We present an accelerated algorithm for hierarchical density based clustering. Our new algorithm improves upon HDBSCAN*, which itself provided a significant qualitative improvement over the popular DBSCAN algorithm. The accelerated HDBSCAN* algorithm provides comparable performance to DBSCAN, while supporting variable density clusters, and eliminating the need for the difficult to tune distance scale parameter. This makes accelerated HDBSCAN* the default choice for density based clustering. Library available at: https://github.com/scikit-learn-contrib/hdbscan

Introductory texts on statistics typically only cover the classical "two sigma" confidence interval for the mean value and do not describe methods to obtain confidence intervals for other estimators. The present technical report fills this gap by first defining different methods for the construction of confidence intervals, and then by their application to a binomial proportion, the mean value, and to arbitrary estimators. Beside the frequentist approach, the likelihood ratio and the highest posterior density approach are explained. Two methods to estimate the variance of general maximum likelihood estimators are described (Hessian, Jackknife), and for arbitrary estimators the bootstrap is suggested. For three examples, the different methods are evaluated by means of Monte Carlo simulations with respect to their coverage probability and interval length. R code is given for all methods, and the practitioner obtains a guideline which method should be used in which cases.

Using a fully Bayesian approach, Gaussian Process regression is extended to include marginalisation over the kernel choice and kernel hyperparameters. In addition, Bayesian model comparison via the evidence enables direct kernel comparison. The calculation of the joint posterior was implemented with a transdimensional sampler which simultaneously samples over the discrete kernel choice and their hyperparameters by embedding these in a higher-dimensional space, from which samples are taken using nested sampling. Kernel recovery and mean function inference were explored on synthetic data from exoplanet transit light curve simulations. Subsequently, the method was extended to marginalisation over mean functions and noise models and applied to the inference of the present-day Hubble parameter, H_0, from real measurements of the Hubble parameter as a function of redshift, derived from the cosmologically model-independent cosmic chronometer and ΛCDM-dependent baryon acoustic oscillation observations. The inferred H_0 values from the cosmic chronometers, baryon acoustic oscillations and combined datasets are H_0= 66 pm 6, km,s^{-1},Mpc^{-1}, H_0= 67 pm 10, km,s^{-1},Mpc^{-1} and H_0= 69 pm 6, km,s^{-1},Mpc^{-1}, respectively. The kernel posterior of the cosmic chronometers dataset prefers a non-stationary linear kernel. Finally, the datasets are shown to be not in tension with ln R=12.17pm 0.02.

Tangles were originally introduced as a concept to formalize regions of high connectivity in graphs. In recent years, they have also been discovered as a link between structural graph theory and data science: when interpreting similarity in data sets as connectivity between points, finding clusters in the data essentially amounts to finding tangles in the underlying graphs. This paper further explores the potential of tangles in data sets as a means for a formal study of clusters. Real-world data often follow a normal distribution. Accounting for this, we develop a quantitative theory of tangles in data sets drawn from Gaussian mixtures. To this end, we equip the data with a graph structure that models similarity between the points and allows us to apply tangle theory to the data. We provide explicit conditions under which tangles associated with the marginal Gaussian distributions exist asymptotically almost surely. This can be considered as a sufficient formal criterion for the separabability of clusters in the data.

The paper presents an O(N log N)-implementation of t-SNE -- an embedding technique that is commonly used for the visualization of high-dimensional data in scatter plots and that normally runs in O(N^2). The new implementation uses vantage-point trees to compute sparse pairwise similarities between the input data objects, and it uses a variant of the Barnes-Hut algorithm - an algorithm used by astronomers to perform N-body simulations - to approximate the forces between the corresponding points in the embedding. Our experiments show that the new algorithm, called Barnes-Hut-SNE, leads to substantial computational advantages over standard t-SNE, and that it makes it possible to learn embeddings of data sets with millions of objects.

Multi-Task Learning (MTL) aims to boost predictive performance by sharing information across related tasks, yet conventional methods often suffer from negative transfer when unrelated or noisy tasks are forced to share representations. We propose Robust Multi-Task Boosting using Clustering and Local Ensembling (RMB-CLE), a principled MTL framework that integrates error-based task clustering with local ensembling. Unlike prior work that assumes fixed clusters or hand-crafted similarity metrics, RMB-CLE derives inter-task similarity directly from cross-task errors, which admit a risk decomposition into functional mismatch and irreducible noise, providing a theoretically grounded mechanism to prevent negative transfer. Tasks are grouped adaptively via agglomerative clustering, and within each cluster, a local ensemble enables robust knowledge sharing while preserving task-specific patterns. Experiments show that RMB-CLE recovers ground-truth clusters in synthetic data and consistently outperforms multi-task, single-task, and pooling-based ensemble methods across diverse real-world and synthetic benchmarks. These results demonstrate that RMB-CLE is not merely a combination of clustering and boosting but a general and scalable framework that establishes a new basis for robust multi-task learning.

Clustering non-Euclidean data is difficult, and one of the most used algorithms besides hierarchical clustering is the popular algorithm Partitioning Around Medoids (PAM), also simply referred to as k-medoids clustering. In Euclidean geometry the mean-as used in k-means-is a good estimator for the cluster center, but this does not exist for arbitrary dissimilarities. PAM uses the medoid instead, the object with the smallest dissimilarity to all others in the cluster. This notion of centrality can be used with any (dis-)similarity, and thus is of high relevance to many domains and applications. A key issue with PAM is its high run time cost. We propose modifications to the PAM algorithm that achieve an O(k)-fold speedup in the second ("SWAP") phase of the algorithm, but will still find the same results as the original PAM algorithm. If we relax the choice of swaps performed (while retaining comparable quality), we can further accelerate the algorithm by eagerly performing additional swaps in each iteration. With the substantially faster SWAP, we can now explore faster initialization strategies, because (i) the classic ("BUILD") initialization now becomes the bottleneck, and (ii) our swap is fast enough to compensate for worse starting conditions. We also show how the CLARA and CLARANS algorithms benefit from the proposed modifications. While we do not study the parallelization of our approach in this work, it can easily be combined with earlier approaches to use PAM and CLARA on big data (some of which use PAM as a subroutine, hence can immediately benefit from these improvements), where the performance with high k becomes increasingly important. In experiments on real data with k=100,200, we observed a 458x respectively 1191x speedup compared to the original PAM SWAP algorithm, making PAM applicable to larger data sets, and in particular to higher k.

Hybrid language models like Jamba mix attention layers with State Space Models (SSMs), creating two memory cache types with opposite profiles: Key-Value (KV) caches grow linearly with sequence length, while SSM states stay fixed per layer. Current inference engines handle this poorly. Unified pools pad SSM states to attention page sizes, wasting up to 7.3x capacity. Static dual pools cannot adapt when prompt distributions shift between requests. We present Asymmetric Virtual Memory Paging (AVMP). The allocator separates the two cache types into physically distinct pools behind a unified virtual address space, and migrates capacity between pools when one runs out. Migration triggers only on allocation failure, keeping behavior deterministic. We evaluate AVMP across 270 synthetic cells plus 60 cells of ShareGPT trace replay on an RTX 3060 12GB. Out-of-Memory events drop 7.6% and request throughput improves 1.83x to 13.3x across synthetic workloads and 2.36x on ShareGPT. All gains hold under paired-bootstrap 95% confidence intervals. A phase-time breakdown reveals two distinct mechanisms: shorter OOM recovery on capacity-pressured workloads, and faster allocation calls on KV-heavy workloads. Implementation is pure Python; Triton integration is future work.

The development of data-dependent heuristics and representations for biological sequences that reflect their evolutionary distance is critical for large-scale biological research. However, popular machine learning approaches, based on continuous Euclidean spaces, have struggled with the discrete combinatorial formulation of the edit distance that models evolution and the hierarchical relationship that characterises real-world datasets. We present Neural Distance Embeddings (NeuroSEED), a general framework to embed sequences in geometric vector spaces, and illustrate the effectiveness of the hyperbolic space that captures the hierarchical structure and provides an average 22% reduction in embedding RMSE against the best competing geometry. The capacity of the framework and the significance of these improvements are then demonstrated devising supervised and unsupervised NeuroSEED approaches to multiple core tasks in bioinformatics. Benchmarked with common baselines, the proposed approaches display significant accuracy and/or runtime improvements on real-world datasets. As an example for hierarchical clustering, the proposed pretrained and from-scratch methods match the quality of competing baselines with 30x and 15x runtime reduction, respectively.

We introduce ClusterLLM, a novel text clustering framework that leverages feedback from an instruction-tuned large language model, such as ChatGPT. Compared with traditional unsupervised methods that builds upon "small" embedders, ClusterLLM exhibits two intriguing advantages: (1) it enjoys the emergent capability of LLM even if its embeddings are inaccessible; and (2) it understands the user's preference on clustering through textual instruction and/or a few annotated data. First, we prompt ChatGPT for insights on clustering perspective by constructing hard triplet questions <does A better correspond to B than C>, where A, B and C are similar data points that belong to different clusters according to small embedder. We empirically show that this strategy is both effective for fine-tuning small embedder and cost-efficient to query ChatGPT. Second, we prompt ChatGPT for helps on clustering granularity by carefully designed pairwise questions <do A and B belong to the same category>, and tune the granularity from cluster hierarchies that is the most consistent with the ChatGPT answers. Extensive experiments on 14 datasets show that ClusterLLM consistently improves clustering quality, at an average cost of ~$0.6 per dataset.

The k-means++ seeding algorithm (Arthur & Vassilvitskii, 2007) is widely used in practice for the k-means clustering problem where the goal is to cluster a dataset X subset R ^d into k clusters. The popularity of this algorithm is due to its simplicity and provable guarantee of being O(log k) competitive with the optimal solution in expectation. However, its running time is O(|X|kd), making it expensive for large datasets. In this work, we present a simple and effective rejection sampling based approach for speeding up k-means++. Our first method runs in time O(nnz (X) + beta k^2d) while still being O(log k ) competitive in expectation. Here, beta is a parameter which is the ratio of the variance of the dataset to the optimal k-means cost in expectation and O hides logarithmic factors in k and |X|. Our second method presents a new trade-off between computational cost and solution quality. It incurs an additional scale-invariant factor of k^{-Omega( m/beta)} Var (X) in addition to the O(log k) guarantee of k-means++ improving upon a result of (Bachem et al, 2016a) who get an additional factor of m^{-1}Var(X) while still running in time O(nnz(X) + mk^2d). We perform extensive empirical evaluations to validate our theoretical results and to show the effectiveness of our approach on real datasets.

Clustering using neural networks has recently demonstrated promising performance in machine learning and computer vision applications. However, the performance of current approaches is limited either by unsupervised learning or their dependence on large set of labeled data samples. In this paper, we propose ClusterNet that uses pairwise semantic constraints from very few labeled data samples (<5% of total data) and exploits the abundant unlabeled data to drive the clustering approach. We define a new loss function that uses pairwise semantic similarity between objects combined with constrained k-means clustering to efficiently utilize both labeled and unlabeled data in the same framework. The proposed network uses convolution autoencoder to learn a latent representation that groups data into k specified clusters, while also learning the cluster centers simultaneously. We evaluate and compare the performance of ClusterNet on several datasets and state of the art deep clustering approaches.

The "maximum similarity correlation" definition introduced in this study is motivated by the seminal work of Szekely et al on "distance covariance" (Ann. Statist. 2007, 35: 2769-2794; Ann. Appl. Stat. 2009, 3: 1236-1265). Instead of using Euclidean distances "d" as in Szekely et al, we use "similarity", which can be defined as "exp(-d/s)", where the scaling parameter s>0 controls how rapidly the similarity falls off with distance. Scale parameters are chosen by maximizing the similarity correlation. The motivation for using "similarity" originates in spectral clustering theory (see e.g. Ng et al 2001, Advances in Neural Information Processing Systems 14: 849-856). We show that a particular form of similarity correlation is asymptotically equivalent to distance correlation for large values of the scale parameter. Furthermore, we extend similarity correlation to coherence between complex valued vectors, including its partitioning into real and imaginary contributions. Several toy examples are used for comparing distance and similarity correlations. For instance, points on a noiseless straight line give distance and similarity correlation values equal to 1; but points on a noiseless circle produces near zero distance correlation (dCorr=0.02) while the similarity correlation is distinctly non zero (sCorr=0.36). In distinction to the distance approach, similarity gives more importance to small distances, which emphasizes the local properties of functional relations. This paper represents a preliminary empirical study, showing that the novel similarity association has some distinct practical advantages over distance based association.For the sake of reproducible research, the software code implementing all methods here (using lazarus free-pascal "www.lazarus.freepascal.org"), including all test data, are freely available at: "sites.google.com/site/pascualmarqui/home/similaritycovariance".

We investigate a general formulation for clustering and transductive few-shot learning, which integrates prototype-based objectives, Laplacian regularization and supervision constraints from a few labeled data points. We propose a concave-convex relaxation of the problem, and derive a computationally efficient block-coordinate bound optimizer, with convergence guarantee. At each iteration,our optimizer computes independent (parallel) updates for each point-to-cluster assignment. Therefore, it could be trivially distributed for large-scale clustering and few-shot tasks. Furthermore, we provides a thorough convergence analysis based on point-to-set maps. Were port comprehensive clustering and few-shot learning experiments over various data sets, showing that our method yields competitive performances, in term of accuracy and optimization quality, while scaling up to large problems. Using standard training on the base classes, without resorting to complex meta-learning and episodic-training strategies, our approach outperforms state-of-the-art few-shot methods by significant margins, across various models, settings and data sets. Surprisingly, we found that even standard clustering procedures (e.g., K-means), which correspond to particular, non-regularized cases of our general model, already achieve competitive performances in comparison to the state-of-the-art in few-shot learning. These surprising results point to the limitations of the current few-shot benchmarks, and question the viability of a large body of convoluted few-shot learning techniques in the recent literature.

We consider the problem of simultaneously clustering and learning a linear representation of data lying close to a union of low-dimensional manifolds, a fundamental task in machine learning and computer vision. When the manifolds are assumed to be linear subspaces, this reduces to the classical problem of subspace clustering, which has been studied extensively over the past two decades. Unfortunately, many real-world datasets such as natural images can not be well approximated by linear subspaces. On the other hand, numerous works have attempted to learn an appropriate transformation of the data, such that data is mapped from a union of general non-linear manifolds to a union of linear subspaces (with points from the same manifold being mapped to the same subspace). However, many existing works have limitations such as assuming knowledge of the membership of samples to clusters, requiring high sampling density, or being shown theoretically to learn trivial representations. In this paper, we propose to optimize the Maximal Coding Rate Reduction metric with respect to both the data representation and a novel doubly stochastic cluster membership, inspired by state-of-the-art subspace clustering results. We give a parameterization of such a representation and membership, allowing efficient mini-batching and one-shot initialization. Experiments on CIFAR-10, -20, -100, and TinyImageNet-200 datasets show that the proposed method is much more accurate and scalable than state-of-the-art deep clustering methods, and further learns a latent linear representation of the data.

This paper reports a methodological pivot from the Open Khipu Repository to the Khipu Field Guide (KFG) database, prompted by stalled progress on the OKR, and a full re-analysis of the resulting 650-khipu sample. Three findings recur across every analysis attempted. First, khipu size confounds nearly every derived structural count, explaining 42-70% of its variance; all subsequent models control for it. Second, the two-letter name prefix (AS, UR, HP, QU, JC, MM, KH) identifies the original cataloger, not a site or period, which turns documentation completeness into a second confound that must be modeled explicitly. Controlling for both, khipus cataloged by Hugo Pereyra's Proyecto Quipu (HP) show significantly fewer Ascher sum-relation types than Gary Urton's (UR) khipus (p = 0.044), while the Ascher-cataloged (AS) khipus are too collinear with their own near-total lack of side/direction documentation to assess (VIF = 5.0). Third, generic structural clustering (UMAP+HDBSCAN) does not separate the pooled 650-khipu sample from two independent null models (permutation and Gaussian), corroborating an independent conclusion already reached by the KFG itself; the same test restricted to a single cataloger (UR) proved not reproducible across runtime environments and is reported here as a methodological caveat rather than evidence of structure. A targeted replication of the KFG's own S/Z-knot spatial-block heuristic for calendar/astronomical khipus recovers 8 of 10 published candidates and proposes 34 additional ones under the same criterion.

Spectral clustering is a popular clustering method. It first maps data into the spectral embedding space and then uses Kmeans to find clusters. However, the two decoupled steps prohibit joint optimization for the optimal solution. In addition, it needs to construct the similarity graph for samples, which suffers from the curse of dimensionality when the data are high-dimensional. To address these two challenges, we introduce Deep Spectral Clustering (DSC), which consists of two main modules: the spectral embedding module and the greedy Kmeans module. The former module learns to efficiently embed raw samples into the spectral embedding space using deep neural networks and power iteration. The latter module improves the cluster structures of Kmeans on the learned spectral embeddings by a greedy optimization strategy, which iteratively reveals the direction of the worst cluster structures and optimizes embeddings in this direction. To jointly optimize spectral embeddings and clustering, we seamlessly integrate the two modules and optimize them in an end-to-end manner. Experimental results on seven real-world datasets demonstrate that DSC achieves state-of-the-art clustering performance.

Best-of-N inference scaling (drawing N candidate answers from a language model and returning the one a reward model ranks highest) improves accuracy by an amount that varies across models, but predicting that amount in advance currently requires running the procedure end-to-end. Prior work links cheap statistics of a model's sampled outputs and validation-set correctness (how often samples agree, how diverse they are, how confident the model is, and where correct samples appear) to model behavior, but does not isolate which of these form a stable, compact predictor of best-of-N gain. We fit ridge predictors on features computed from a single labeled validation-set sampling pass, use bootstrap-Lasso as a stability analysis of the candidate feature set, and give a concentration analysis with an explicit linear-approximation residual. Across three base-model families, six post-training methods, and math and reasoning task domains, the stability analysis identifies a strict three-feature core spanning prompt-level agreement spread, label-assisted first-correct-sample position, and completion-length variance; a compact ridge predictor built from this core plus an entropy add-on reaches Spearman ρ= 0.90 with actual best-of-N gain under a reward-model verifier. The intended use is labeled validation-set screening of candidate configurations before paying the full reward-model scoring cost.

In this paper, we propose a recurrent framework for Joint Unsupervised LEarning (JULE) of deep representations and image clusters. In our framework, successive operations in a clustering algorithm are expressed as steps in a recurrent process, stacked on top of representations output by a Convolutional Neural Network (CNN). During training, image clusters and representations are updated jointly: image clustering is conducted in the forward pass, while representation learning in the backward pass. Our key idea behind this framework is that good representations are beneficial to image clustering and clustering results provide supervisory signals to representation learning. By integrating two processes into a single model with a unified weighted triplet loss and optimizing it end-to-end, we can obtain not only more powerful representations, but also more precise image clusters. Extensive experiments show that our method outperforms the state-of-the-art on image clustering across a variety of image datasets. Moreover, the learned representations generalize well when transferred to other tasks.

In practical scenarios, the effectiveness of sequential recommendation systems is hindered by the user cold-start problem, which arises due to limited interactions for accurately determining user preferences. Previous studies have attempted to address this issue by combining meta-learning with user and item-side information. However, these approaches face inherent challenges in modeling user preference dynamics, particularly for "minor users" who exhibit distinct preferences compared to more common or "major users." To overcome these limitations, we present a novel approach called ClusterSeq, a Meta-Learning Clustering-Based Sequential Recommender System. ClusterSeq leverages dynamic information in the user sequence to enhance item prediction accuracy, even in the absence of side information. This model preserves the preferences of minor users without being overshadowed by major users, and it capitalizes on the collective knowledge of users within the same cluster. Extensive experiments conducted on various benchmark datasets validate the effectiveness of ClusterSeq. Empirical results consistently demonstrate that ClusterSeq outperforms several state-of-the-art meta-learning recommenders. Notably, compared to existing meta-learning methods, our proposed approach achieves a substantial improvement of 16-39% in Mean Reciprocal Rank (MRR).

Clustering is a class of unsupervised learning methods that has been extensively applied and studied in computer vision. Little work has been done to adapt it to the end-to-end training of visual features on large scale datasets. In this work, we present DeepCluster, a clustering method that jointly learns the parameters of a neural network and the cluster assignments of the resulting features. DeepCluster iteratively groups the features with a standard clustering algorithm, k-means, and uses the subsequent assignments as supervision to update the weights of the network. We apply DeepCluster to the unsupervised training of convolutional neural networks on large datasets like ImageNet and YFCC100M. The resulting model outperforms the current state of the art by a significant margin on all the standard benchmarks.

Large language models increasingly operate over large collections of tools, functions, APIs, and specialized agents. As the candidate action space grows, a function-calling model must process more schemas, consume more prompt tokens, and distinguish among increasingly similar or irrelevant alternatives. We study a complementary systems strategy: reduce the candidate set before language-model inference while leaving the downstream model unchanged. We introduce AgentWeave, a deterministic pre-inference routing layer that constructs a bounded model-visible action space using eligibility, requirement, capability, and routing signals. We evaluate AgentWeave with a frozen BFCL-derived routing-pressure protocol using the public MadeAgents/Hammer2.1-1.5b model. On 48 fresh BFCL V4 multiple-function tasks, AgentWeave achieves 6/48 (12.5%) native BFCL successes, whereas all-tools, deterministic random top-8, and semantic top-8 baselines each achieve 0/48. The paired success difference is +12.5 percentage points with a 10,000-resample paired bootstrap 95% confidence interval of +4.17 to +22.92 points and exact McNemar p=0.03125. Relative to all-tools exposure, AgentWeave presents 70.18% fewer tools, uses 61.70% fewer input tokens, and exhibits 50.95% lower mean local-model latency. The result is deliberately narrow: this is a BFCL-derived routing-pressure study rather than an official full BFCL leaderboard score, and absolute task success remains low. The evidence nevertheless shows that candidate-space construction can materially affect a fixed model's function-calling behavior and motivates evaluating routing as a distinct stage before model reasoning.

We study the estimation of a planted signal hidden in a recently introduced nested matrix-tensor model, which is an extension of the classical spiked rank-one tensor model, motivated by multi-view clustering. Prior work has theoretically examined the performance of a tensor-based approach, which relies on finding a best rank-one approximation, a problem known to be computationally hard. A tractable alternative approach consists in computing instead the best rank-one (matrix) approximation of an unfolding of the observed tensor data, but its performance was hitherto unknown. We quantify here the performance gap between these two approaches, in particular by deriving the precise algorithmic threshold of the unfolding approach and demonstrating that it exhibits a BBP-type transition behavior. This work is therefore in line with recent contributions which deepen our understanding of why tensor-based methods surpass matrix-based methods in handling structured tensor data.

Recently, deep clustering methods have gained momentum because of the high representational power of deep neural networks (DNNs) such as autoencoder. The key idea is that representation learning and clustering can reinforce each other: Good representations lead to good clustering while good clustering provides good supervisory signals to representation learning. Critical questions include: 1) How to optimize representation learning and clustering? 2) Should the reconstruction loss of autoencoder be considered always? In this paper, we propose DEKM (for Deep Embedded K-Means) to answer these two questions. Since the embedding space generated by autoencoder may have no obvious cluster structures, we propose to further transform the embedding space to a new space that reveals the cluster-structure information. This is achieved by an orthonormal transformation matrix, which contains the eigenvectors of the within-class scatter matrix of K-means. The eigenvalues indicate the importance of the eigenvectors' contributions to the cluster-structure information in the new space. Our goal is to increase the cluster-structure information. To this end, we discard the decoder and propose a greedy method to optimize the representation. Representation learning and clustering are alternately optimized by DEKM. Experimental results on the real-world datasets demonstrate that DEKM achieves state-of-the-art performance.

We extend conformal prediction methodology beyond the case of exchangeable data. In particular, we show that a weighted version of conformal prediction can be used to compute distribution-free prediction intervals for problems in which the test and training covariate distributions differ, but the likelihood ratio between these two distributions is known---or, in practice, can be estimated accurately with access to a large set of unlabeled data (test covariate points). Our weighted extension of conformal prediction also applies more generally, to settings in which the data satisfies a certain weighted notion of exchangeability. We discuss other potential applications of our new conformal methodology, including latent variable and missing data problems.

Bootstrap aggregating (bagging) is an effective ensemble protocol, which is believed can enhance robustness by its majority voting mechanism. Recent works further prove the sample-wise robustness certificates for certain forms of bagging (e.g. partition aggregation). Beyond these particular forms, in this paper, we propose the first collective certification for general bagging to compute the tight robustness against the global poisoning attack. Specifically, we compute the maximum number of simultaneously changed predictions via solving a binary integer linear programming (BILP) problem. Then we analyze the robustness of vanilla bagging and give the upper bound of the tolerable poison budget. Based on this analysis, we propose hash bagging to improve the robustness of vanilla bagging almost for free. This is achieved by modifying the random subsampling in vanilla bagging to a hash-based deterministic subsampling, as a way of controlling the influence scope for each poisoning sample universally. Our extensive experiments show the notable advantage in terms of applicability and robustness.

Leveraging nearest neighbor retrieval for self-supervised representation learning has proven beneficial with object-centric images. However, this approach faces limitations when applied to scene-centric datasets, where multiple objects within an image are only implicitly captured in the global representation. Such global bootstrapping can lead to undesirable entanglement of object representations. Furthermore, even object-centric datasets stand to benefit from a finer-grained bootstrapping approach. In response to these challenges, we introduce a novel Cross-Image Object-Level Bootstrapping method tailored to enhance dense visual representation learning. By employing object-level nearest neighbor bootstrapping throughout the training, CrIBo emerges as a notably strong and adequate candidate for in-context learning, leveraging nearest neighbor retrieval at test time. CrIBo shows state-of-the-art performance on the latter task while being highly competitive in more standard downstream segmentation tasks. Our code and pretrained models are publicly available at https://github.com/tileb1/CrIBo.

Reliable uncertainty quantification remains a central challenge in predictive modeling. While Bayesian methods are theoretically appealing, their predictive intervals can exhibit poor frequentist calibration, particularly with small sample sizes or model misspecification. We introduce a practical and broadly applicable Bayesian conformal approach based on the influence-function Bayesian bootstrap (BB) with data-driven tuning of the Dirichlet concentration parameter, α. By efficiently approximating the Bayesian bootstrap predictive distribution via influence functions and calibrating α to optimize empirical coverage or average log-probability, our method constructs prediction intervals and distributions that are both well-calibrated and sharp. Across a range of regression models and data settings, this Bayesian conformal framework consistently yields improved empirical coverage and log-score compared to standard Bayesian posteriors. Our procedure is fast, easy to implement, and offers a flexible approach for distributional calibration in predictive modeling.

The recent integration of deep learning and pairwise similarity annotation-based constrained clustering -- i.e., deep constrained clustering (DCC) -- has proven effective for incorporating weak supervision into massive data clustering: Less than 1% of pair similarity annotations can often substantially enhance the clustering accuracy. However, beyond empirical successes, there is a lack of understanding of DCC. In addition, many DCC paradigms are sensitive to annotation noise, but performance-guaranteed noisy DCC methods have been largely elusive. This work first takes a deep look into a recently emerged logistic loss function of DCC, and characterizes its theoretical properties. Our result shows that the logistic DCC loss ensures the identifiability of data membership under reasonable conditions, which may shed light on its effectiveness in practice. Building upon this understanding, a new loss function based on geometric factor analysis is proposed to fend against noisy annotations. It is shown that even under unknown annotation confusions, the data membership can still be provably identified under our proposed learning criterion. The proposed approach is tested over multiple datasets to validate our claims.

The goal of two-sample tests is to assess whether two samples, S_P sim P^n and S_Q sim Q^m, are drawn from the same distribution. Perhaps intriguingly, one relatively unexplored method to build two-sample tests is the use of binary classifiers. In particular, construct a dataset by pairing the n examples in S_P with a positive label, and by pairing the m examples in S_Q with a negative label. If the null hypothesis "P = Q" is true, then the classification accuracy of a binary classifier on a held-out subset of this dataset should remain near chance-level. As we will show, such Classifier Two-Sample Tests (C2ST) learn a suitable representation of the data on the fly, return test statistics in interpretable units, have a simple null distribution, and their predictive uncertainty allow to interpret where P and Q differ. The goal of this paper is to establish the properties, performance, and uses of C2ST. First, we analyze their main theoretical properties. Second, we compare their performance against a variety of state-of-the-art alternatives. Third, we propose their use to evaluate the sample quality of generative models with intractable likelihoods, such as Generative Adversarial Networks (GANs). Fourth, we showcase the novel application of GANs together with C2ST for causal discovery.

Clustering non-Euclidean data is difficult, and one of the most used algorithms besides hierarchical clustering is the popular algorithm Partitioning Around Medoids (PAM), also simply referred to as k-medoids. In Euclidean geometry the mean-as used in k-means-is a good estimator for the cluster center, but this does not hold for arbitrary dissimilarities. PAM uses the medoid instead, the object with the smallest dissimilarity to all others in the cluster. This notion of centrality can be used with any (dis-)similarity, and thus is of high relevance to many domains such as biology that require the use of Jaccard, Gower, or more complex distances. A key issue with PAM is its high run time cost. We propose modifications to the PAM algorithm to achieve an O(k)-fold speedup in the second SWAP phase of the algorithm, but will still find the same results as the original PAM algorithm. If we slightly relax the choice of swaps performed (at comparable quality), we can further accelerate the algorithm by performing up to k swaps in each iteration. With the substantially faster SWAP, we can now also explore alternative strategies for choosing the initial medoids. We also show how the CLARA and CLARANS algorithms benefit from these modifications. It can easily be combined with earlier approaches to use PAM and CLARA on big data (some of which use PAM as a subroutine, hence can immediately benefit from these improvements), where the performance with high k becomes increasingly important. In experiments on real data with k=100, we observed a 200-fold speedup compared to the original PAM SWAP algorithm, making PAM applicable to larger data sets as long as we can afford to compute a distance matrix, and in particular to higher k (at k=2, the new SWAP was only 1.5 times faster, as the speedup is expected to increase with k).

Can pretrained models generalize to new datasets without any retraining? We deploy pretrained image models on datasets they were not trained for, and investigate whether their embeddings form meaningful clusters. Our suite of benchmarking experiments use encoders pretrained solely on ImageNet-1k with either supervised or self-supervised training techniques, deployed on image datasets that were not seen during training, and clustered with conventional clustering algorithms. This evaluation provides new insights into the embeddings of self-supervised models, which prioritize different features to supervised models. Supervised encoders typically offer more utility than SSL encoders within the training domain, and vice-versa far outside of it, however, fine-tuned encoders demonstrate the opposite trend. Clustering provides a way to evaluate the utility of self-supervised learned representations orthogonal to existing methods such as kNN. Additionally, we find the silhouette score when measured in a UMAP-reduced space is highly correlated with clustering performance, and can therefore be used as a proxy for clustering performance on data with no ground truth labels. Our code implementation is available at https://github.com/scottclowe/zs-ssl-clustering/.

Text clustering remains valuable in real-world applications where manual labeling is cost-prohibitive. It facilitates efficient organization and analysis of information by grouping similar texts based on their representations. However, implementing this approach necessitates fine-tuned embedders for downstream data and sophisticated similarity metrics. To address this issue, this study presents a novel framework for text clustering that effectively leverages the in-context learning capacity of Large Language Models (LLMs). Instead of fine-tuning embedders, we propose to transform the text clustering into a classification task via LLM. First, we prompt LLM to generate potential labels for a given dataset. Second, after integrating similar labels generated by the LLM, we prompt the LLM to assign the most appropriate label to each sample in the dataset. Our framework has been experimentally proven to achieve comparable or superior performance to state-of-the-art clustering methods that employ embeddings, without requiring complex fine-tuning or clustering algorithms. We make our code available to the public for utilization at https://anonymous.4open.science/r/Text-Clustering-via-LLM-E500.

Federated Learning (FL) is a widespread and well-adopted paradigm of decentralised learning that allows training one model from multiple sources without the need to transfer data between participating clients directly. Since its inception in 2015, it has been divided into numerous subfields that deal with application-specific issues, such as data heterogeneity or resource allocation. One such sub-field, Clustered Federated Learning (CFL), deals with the problem of clustering the population of clients into separate cohorts to deliver personalised models. Although a few remarkable works have been published in this domain, the problem remains largely unexplored, as its basic assumptions and settings differ slightly from those of standard FL. In this work, we present One-Shot Clustered Federated Learning (OCFL), a clustering-agnostic algorithm that can automatically detect the earliest suitable moment for clustering. Our algorithm is based on computing the cosine distance between the gradients of the clients and a temperature measure that detects when the federated model starts to converge. We empirically evaluate our methodology by testing various one-shot clustering algorithms for over forty different tasks on five benchmark datasets. Our experiments showcase the good performance of our approach when used to perform CFL in an automated manner without the need to adjust hyperparameters. We also revisit the practical feasibility of CFL algorithms based on the gradients of the clients, providing firm evidence of the high efficiency of density-based clustering methods when used to differentiate between the loss surfaces of neural networks trained on different distributions. Moreover, by inspecting the feasibility of local explanations generated with the help of GradCAM, we can provide more insights into the relationship between personalisation and the explainability of local predictions.

We address the problem of distance metric learning (DML), defined as learning a distance consistent with a notion of semantic similarity. Traditionally, for this problem supervision is expressed in the form of sets of points that follow an ordinal relationship -- an anchor point x is similar to a set of positive points Y, and dissimilar to a set of negative points Z, and a loss defined over these distances is minimized. While the specifics of the optimization differ, in this work we collectively call this type of supervision Triplets and all methods that follow this pattern Triplet-Based methods. These methods are challenging to optimize. A main issue is the need for finding informative triplets, which is usually achieved by a variety of tricks such as increasing the batch size, hard or semi-hard triplet mining, etc. Even with these tricks, the convergence rate of such methods is slow. In this paper we propose to optimize the triplet loss on a different space of triplets, consisting of an anchor data point and similar and dissimilar proxy points which are learned as well. These proxies approximate the original data points, so that a triplet loss over the proxies is a tight upper bound of the original loss. This proxy-based loss is empirically better behaved. As a result, the proxy-loss improves on state-of-art results for three standard zero-shot learning datasets, by up to 15% points, while converging three times as fast as other triplet-based losses.

We study the new task of class-incremental Novel Class Discovery (class-iNCD), which refers to the problem of discovering novel categories in an unlabelled data set by leveraging a pre-trained model that has been trained on a labelled data set containing disjoint yet related categories. Apart from discovering novel classes, we also aim at preserving the ability of the model to recognize previously seen base categories. Inspired by rehearsal-based incremental learning methods, in this paper we propose a novel approach for class-iNCD which prevents forgetting of past information about the base classes by jointly exploiting base class feature prototypes and feature-level knowledge distillation. We also propose a self-training clustering strategy that simultaneously clusters novel categories and trains a joint classifier for both the base and novel classes. This makes our method able to operate in a class-incremental setting. Our experiments, conducted on three common benchmarks, demonstrate that our method significantly outperforms state-of-the-art approaches. Code is available at https://github.com/OatmealLiu/class-iNCD

The ROC curve is the major tool for assessing not only the performance but also the fairness properties of a similarity scoring function. In order to draw reliable conclusions based on empirical ROC analysis, accurately evaluating the uncertainty level related to statistical versions of the ROC curves of interest is absolutely necessary, especially for applications with considerable societal impact such as Face Recognition. In this article, we prove asymptotic guarantees for empirical ROC curves of similarity functions as well as for by-product metrics useful to assess fairness. We also explain that, because the false acceptance/rejection rates are of the form of U-statistics in the case of similarity scoring, the naive bootstrap approach may jeopardize the assessment procedure. A dedicated recentering technique must be used instead. Beyond the theoretical analysis carried out, various experiments using real face image datasets provide strong empirical evidence of the practical relevance of the methods promoted here, when applied to several ROC-based measures such as popular fairness metrics.

Improvements in language models are often driven by improving the quality of the data we train them on, which can be limiting when strong supervision is scarce. In this work, we show that paired preference data consisting of individually weak data points can enable gains beyond the strength of each individual data point. We formulate the delta learning hypothesis to explain this phenomenon, positing that the relative quality delta between points suffices to drive learning via preference tuning--even when supervised finetuning on the weak data hurts. We validate our hypothesis in controlled experiments and at scale, where we post-train 8B models on preference data generated by pairing a small 3B model's responses with outputs from an even smaller 1.5B model to create a meaningful delta. Strikingly, on a standard 11-benchmark evaluation suite (MATH, MMLU, etc.), our simple recipe matches the performance of Tulu 3, a state-of-the-art open model tuned from the same base model while relying on much stronger supervisors (e.g., GPT-4o). Thus, delta learning enables simpler and cheaper open recipes for state-of-the-art post-training. To better understand delta learning, we prove in logistic regression that the performance gap between two weak teacher models provides useful signal for improving a stronger student. Overall, our work shows that models can learn surprisingly well from paired data that might typically be considered weak.

Knowledge benchmarks for LLMs face three issues: scaling-driven designs that do not operationalize disciplinary representativeness; flat-payment annotation that permits lazy consensus; and unaudited ranking instability under bounded test budgets. We introduce KINA, an 899-item benchmark across 261 fine-grained disciplines, with two formal results. First, we cast representativeness as a coverage-style objective over expert-elicited anchors and operationalize disciplinary representativeness through a proxy, yielding a (1-1/e) greedy approximation (Proposition 1); the guarantee applies to the proxy, not to population representativeness. Second, we prove a bonus-on-bar tournament weakly FOSD-dominates flat payment in released-review quality, with incentive-compatibility threshold B > Delta C / Delta p_min (Theorem 1). Evaluating 42 models from 13 labs, the top model, Gemini-3.1-Pro-Preview, reaches 53.17%, followed by Claude-Opus-4.6 at 49.92% and GPT-5.4 at 48.55%, leaving substantial headroom below saturation. The full leaderboard shows a tiered structure rather than a smooth total order: a small frontier tier lies above 48%, a dense strong-model tier spans roughly 38-45%, and low-performing models remain only modestly above the 10% chance baseline. Tool augmentation adds up to 5.17 points across the five tool-use evaluations, with gains varying substantially across models. We report bootstrap ranking-stability statistics to make bounded-budget variance explicit and to discourage over-interpretation of adjacent ranks.

Clustering has been a major research topic in the field of machine learning, one to which Deep Learning has recently been applied with significant success. However, an aspect of clustering that is not addressed by existing deep clustering methods, is that of efficiently producing multiple, diverse partitionings for a given dataset. This is particularly important, as a diverse set of base clusterings are necessary for consensus clustering, which has been found to produce better and more robust results than relying on a single clustering. To address this gap, we propose DivClust, a diversity controlling loss that can be incorporated into existing deep clustering frameworks to produce multiple clusterings with the desired degree of diversity. We conduct experiments with multiple datasets and deep clustering frameworks and show that: a) our method effectively controls diversity across frameworks and datasets with very small additional computational cost, b) the sets of clusterings learned by DivClust include solutions that significantly outperform single-clustering baselines, and c) using an off-the-shelf consensus clustering algorithm, DivClust produces consensus clustering solutions that consistently outperform single-clustering baselines, effectively improving the performance of the base deep clustering framework.

Not all positive pairs are beneficial to time series contrastive learning. In this paper, we study two types of bad positive pairs that can impair the quality of time series representation learned through contrastive learning: the noisy positive pair and the faulty positive pair. We observe that, with the presence of noisy positive pairs, the model tends to simply learn the pattern of noise (Noisy Alignment). Meanwhile, when faulty positive pairs arise, the model wastes considerable amount of effort aligning non-representative patterns (Faulty Alignment). To address this problem, we propose a Dynamic Bad Pair Mining (DBPM) algorithm, which reliably identifies and suppresses bad positive pairs in time series contrastive learning. Specifically, DBPM utilizes a memory module to dynamically track the training behavior of each positive pair along training process. This allows us to identify potential bad positive pairs at each epoch based on their historical training behaviors. The identified bad pairs are subsequently down-weighted through a transformation module, thereby mitigating their negative impact on the representation learning process. DBPM is a simple algorithm designed as a lightweight plug-in without learnable parameters to enhance the performance of existing state-of-the-art methods. Through extensive experiments conducted on four large-scale, real-world time series datasets, we demonstrate DBPM's efficacy in mitigating the adverse effects of bad positive pairs.

We study the problem of detecting the correlation between two Gaussian databases XinR^{ntimes d} and Y^{ntimes d}, each composed of n users with d features. This problem is relevant in the analysis of social media, computational biology, etc. We formulate this as a hypothesis testing problem: under the null hypothesis, these two databases are statistically independent. Under the alternative, however, there exists an unknown permutation sigma over the set of n users (or, row permutation), such that X is rho-correlated with Y^sigma, a permuted version of Y. We determine sharp thresholds at which optimal testing exhibits a phase transition, depending on the asymptotic regime of n and d. Specifically, we prove that if rho^2dto0, as dtoinfty, then weak detection (performing slightly better than random guessing) is statistically impossible, irrespectively of the value of n. This compliments the performance of a simple test that thresholds the sum all entries of X^TY. Furthermore, when d is fixed, we prove that strong detection (vanishing error probability) is impossible for any rho<rho^star, where rho^star is an explicit function of d, while weak detection is again impossible as long as rho^2dto0. These results close significant gaps in current recent related studies.

In recent years, spectral clustering has become one of the most popular modern clustering algorithms. It is simple to implement, can be solved efficiently by standard linear algebra software, and very often outperforms traditional clustering algorithms such as the k-means algorithm. On the first glance spectral clustering appears slightly mysterious, and it is not obvious to see why it works at all and what it really does. The goal of this tutorial is to give some intuition on those questions. We describe different graph Laplacians and their basic properties, present the most common spectral clustering algorithms, and derive those algorithms from scratch by several different approaches. Advantages and disadvantages of the different spectral clustering algorithms are discussed.

We study the problem of optimizing biological sequences, e.g., proteins, DNA, and RNA, to maximize a black-box score function that is only evaluated in an offline dataset. We propose a novel solution, bootstrapped training of score-conditioned generator (BootGen) algorithm. Our algorithm repeats a two-stage process. In the first stage, our algorithm trains the biological sequence generator with rank-based weights to enhance the accuracy of sequence generation based on high scores. The subsequent stage involves bootstrapping, which augments the training dataset with self-generated data labeled by a proxy score function. Our key idea is to align the score-based generation with a proxy score function, which distills the knowledge of the proxy score function to the generator. After training, we aggregate samples from multiple bootstrapped generators and proxies to produce a diverse design. Extensive experiments show that our method outperforms competitive baselines on biological sequential design tasks. We provide reproducible source code: https://github.com/kaist-silab/bootgen{https://github.com/kaist-silab/bootgen}.

The success of contrastive language-image pretraining (CLIP) relies on the supervision from the pairing between images and captions, which tends to be noisy in web-crawled data. We present Mixture of Data Experts (MoDE) and learn a system of CLIP data experts via clustering. Each data expert is trained on one data cluster, being less sensitive to false negative noises in other clusters. At inference time, we ensemble their outputs by applying weights determined through the correlation between task metadata and cluster conditions. To estimate the correlation precisely, the samples in one cluster should be semantically similar, but the number of data experts should still be reasonable for training and inference. As such, we consider the ontology in human language and propose to use fine-grained cluster centers to represent each data expert at a coarse-grained level. Experimental studies show that four CLIP data experts on ViT-B/16 outperform the ViT-L/14 by OpenAI CLIP and OpenCLIP on zero-shot image classification but with less (<35\%) training cost. Meanwhile, MoDE can train all data expert asynchronously and can flexibly include new data experts. The code is available at https://github.com/facebookresearch/MetaCLIP/tree/main/mode.

We study the conformal bootstrap of 1D CFTs on the straight Maldacena-Wilson line in 4D {cal N}=4 super-Yang-Mills theory. We introduce an improved truncation scheme with an 'OPE tail' approximation and use it to reproduce the 'bootstrability' results of Cavagli\`a et al. for the OPE-coefficients squared of the first three unprotected operators. For example, for the first OPE-coefficient squared at 't Hooft coupling (4pi)^2, linear-functional methods with two sum rules from integrated correlators give the rigorous result 0.294014873 pm 4.88 cdot 10^{-8}, whereas our methods give with machine-precision computations 0.294014228 pm 6.77 cdot 10^{-7}. For our numerical searches, we benchmark the Reinforcement Learning Soft Actor-Critic algorithm against an Interior Point Method algorithm (IPOPT) and comment on the merits of each algorithm.

The similarity among samples and the discrepancy between clusters are two crucial aspects of image clustering. However, current deep clustering methods suffer from the inaccurate estimation of either feature similarity or semantic discrepancy. In this paper, we present a Semantic Pseudo-labeling-based Image ClustEring (SPICE) framework, which divides the clustering network into a feature model for measuring the instance-level similarity and a clustering head for identifying the cluster-level discrepancy. We design two semantics-aware pseudo-labeling algorithms, prototype pseudo-labeling, and reliable pseudo-labeling, which enable accurate and reliable self-supervision over clustering. Without using any ground-truth label, we optimize the clustering network in three stages: 1) train the feature model through contrastive learning to measure the instance similarity, 2) train the clustering head with the prototype pseudo-labeling algorithm to identify cluster semantics, and 3) jointly train the feature model and clustering head with the reliable pseudo-labeling algorithm to improve the clustering performance. Extensive experimental results demonstrate that SPICE achieves significant improvements (~10%) over existing methods and establishes the new state-of-the-art clustering results on six image benchmark datasets in terms of three popular metrics. Importantly, SPICE significantly reduces the gap between unsupervised and fully-supervised classification; e.g., there is only a 2% (91.8% vs 93.8%) accuracy difference on CIFAR-10. Our code has been made publically available at https://github.com/niuchuangnn/SPICE.

We investigate composed image retrieval with text feedback. Users gradually look for the target of interest by moving from coarse to fine-grained feedback. However, existing methods merely focus on the latter, i.e., fine-grained search, by harnessing positive and negative pairs during training. This pair-based paradigm only considers the one-to-one distance between a pair of specific points, which is not aligned with the one-to-many coarse-grained retrieval process and compromises the recall rate. In an attempt to fill this gap, we introduce a unified learning approach to simultaneously modeling the coarse- and fine-grained retrieval by considering the multi-grained uncertainty. The key idea underpinning the proposed method is to integrate fine- and coarse-grained retrieval as matching data points with small and large fluctuations, respectively. Specifically, our method contains two modules: uncertainty modeling and uncertainty regularization. (1) The uncertainty modeling simulates the multi-grained queries by introducing identically distributed fluctuations in the feature space. (2) Based on the uncertainty modeling, we further introduce uncertainty regularization to adapt the matching objective according to the fluctuation range. Compared with existing methods, the proposed strategy explicitly prevents the model from pushing away potential candidates in the early stage, and thus improves the recall rate. On the three public datasets, i.e., FashionIQ, Fashion200k, and Shoes, the proposed method has achieved +4.03%, +3.38%, and +2.40% Recall@50 accuracy over a strong baseline, respectively.

We consider the problem of predicting how the likelihood of an outcome of interest for a patient changes over time as we observe more of the patient data. To solve this problem, we propose a supervised contrastive learning framework that learns an embedding representation for each time step of a patient time series. Our framework learns the embedding space to have the following properties: (1) nearby points in the embedding space have similar predicted class probabilities, (2) adjacent time steps of the same time series map to nearby points in the embedding space, and (3) time steps with very different raw feature vectors map to far apart regions of the embedding space. To achieve property (3), we employ a nearest neighbor pairing mechanism in the raw feature space. This mechanism also serves as an alternative to data augmentation, a key ingredient of contrastive learning, which lacks a standard procedure that is adequately realistic for clinical tabular data, to our knowledge. We demonstrate that our approach outperforms state-of-the-art baselines in predicting mortality of septic patients (MIMIC-III dataset) and tracking progression of cognitive impairment (ADNI dataset). Our method also consistently recovers the correct synthetic dataset embedding structure across experiments, a feat not achieved by baselines. Our ablation experiments show the pivotal role of our nearest neighbor pairing.

To examine whether collector-generated terminal labels on the pump.fun platform can be interpreted as platform-side graduation outcomes, and whether a pre-registered logistic association model generalises across a subsequent temporal holdout of the same cohort. A frozen primary cohort of 749,816 unique mints recorded by a V3 off-chain collector between 12 May 2026 and 10 June 2026 is analysed. The design combines a source-code and reconstructed-state measurement audit of the collector's terminal-classification mechanism with a pre-registered locked logistic association model fitted on a 15-day development cohort and evaluated on a subsequent 14-day validation cohort under the pre-registered stability-gate framework. Calendar-day cluster-robust covariance and day-block bootstrap procedures assess uncertainty. Development discrimination is high (AUROC 0.8594), but the model does not generalise to the held-out validation cohort (AUROC 0.4642; 500 of 500 successful bootstrap replicates; 95% percentile interval [0.4112, 0.5196] containing 0.5000). Validation calibration deteriorates substantially (slope 0.013, intercept +2.816); the market-cap functional form is not stable across pre-registered specifications; and of nine automated evaluations, two pass, six fail, and one is not evaluable. The collector's TIMEOUT label does not establish platform-side non-graduation. The paper treats outcome ascertainment as a first-order measurement problem rather than assuming that an off-chain collector's terminal classification measures the platform-side event. It pairs this audit with a pre-registered held-out temporal-generalisation test and reports the resulting negative finding as registered, alongside a fully reproducible correction history.

A family of loss functions built on pair-based computation have been proposed in the literature which provide a myriad of solutions for deep metric learning. In this paper, we provide a general weighting framework for understanding recent pair-based loss functions. Our contributions are three-fold: (1) we establish a General Pair Weighting (GPW) framework, which casts the sampling problem of deep metric learning into a unified view of pair weighting through gradient analysis, providing a powerful tool for understanding recent pair-based loss functions; (2) we show that with GPW, various existing pair-based methods can be compared and discussed comprehensively, with clear differences and key limitations identified; (3) we propose a new loss called multi-similarity loss (MS loss) under the GPW, which is implemented in two iterative steps (i.e., mining and weighting). This allows it to fully consider three similarities for pair weighting, providing a more principled approach for collecting and weighting informative pairs. Finally, the proposed MS loss obtains new state-of-the-art performance on four image retrieval benchmarks, where it outperforms the most recent approaches, such as ABEKim_2018_ECCV and HTL by a large margin: 60.6% to 65.7% on CUB200, and 80.9% to 88.0% on In-Shop Clothes Retrieval dataset at Recall@1. Code is available at https://github.com/MalongTech/research-ms-loss.

The clustering problem, and more generally, latent factor discovery --or latent space inference-- is formulated in terms of the Wasserstein barycenter problem from optimal transport. The objective proposed is the maximization of the variability attributable to class, further characterized as the minimization of the variance of the Wasserstein barycenter. Existing theory, which constrains the transport maps to rigid translations, is extended to affine transformations. The resulting non-parametric clustering algorithms include k-means as a special case and exhibit more robust performance. A continuous version of these algorithms discovers continuous latent variables and generalizes principal curves. The strength of these algorithms is demonstrated by tests on both artificial and real-world data sets.

Driven by advances in recording technology, large-scale high-dimensional datasets have emerged across many scientific disciplines. Especially in biology, clustering is often used to gain insights into the structure of such datasets, for instance to understand the organization of different cell types. However, clustering is known to scale poorly to high dimensions, even though the exact impact of dimensionality is unclear as current benchmark datasets are mostly two-dimensional. Here we propose MNIST-Nd, a set of synthetic datasets that share a key property of real-world datasets, namely that individual samples are noisy and clusters do not perfectly separate. MNIST-Nd is obtained by training mixture variational autoencoders with 2 to 64 latent dimensions on MNIST, resulting in six datasets with comparable structure but varying dimensionality. It thus offers the chance to disentangle the impact of dimensionality on clustering. Preliminary common clustering algorithm benchmarks on MNIST-Nd suggest that Leiden is the most robust for growing dimensions.

We propose a computationally efficient inferential procedure for longitudinal function-on-function regression. The method follows a marginal three-step approach: (1) fit massive pointwise longitudinal scalar-on-function regression models, (2) smooth the resulting estimates along the bivariate functional domain, and (3) compute confidence bands using either an analytic approach for Gaussian data or a cluster bootstrap for Gaussian or non-Gaussian data. Simulation studies demonstrate that the proposed method achieves accurate estimation and valid inference, while substantially reducing computational burden compared to existing approaches. Methods are motivated by a physical activity intervention trial in older adults where high-dimensional wearable data were collected longitudinally across multiple visits. Our applications reveal significant increases in physical activity in the morning using interpersonal intervention strategies, but not intrapersonal strategies. The proposed methods are implemented in an R package.

Self-supervised learning excels at learning representations from large amounts of data. At the same time, generative models offer the complementary property of learning information about the underlying data generation process. In this study, we aim at establishing a principled connection between these two paradigms and highlight the benefits of their complementarity. In particular, we perform an analysis of self-supervised learning objectives, elucidating the underlying probabilistic graphical models and presenting a standardized methodology for their derivation from first principles. The analysis suggests a natural means of integrating self-supervised learning with likelihood-based generative models. We instantiate this concept within the realm of cluster-based self-supervised learning and energy models, introducing a lower bound proven to reliably penalize the most important failure modes and unlocking full unification. Our theoretical findings are substantiated through experiments on synthetic and real-world data, including SVHN, CIFAR10, and CIFAR100, demonstrating that our objective function allows to jointly train a backbone network in a discriminative and generative fashion, consequently outperforming existing self-supervised learning strategies in terms of clustering, generation and out-of-distribution detection performance by a wide margin. We also demonstrate that the solution can be integrated into a neuro-symbolic framework to tackle a simple yet non-trivial instantiation of the symbol grounding problem. The code is publicly available at https://github.com/emsansone/GEDI.

This paper explores the use of latent bootstrapping, an alternative self-supervision technique, for pretraining language models. Unlike the typical practice of using self-supervision on discrete subwords, latent bootstrapping leverages contextualized embeddings for a richer supervision signal. We conduct experiments to assess how effective this approach is for acquiring linguistic knowledge from limited resources. Specifically, our experiments are based on the BabyLM shared task, which includes pretraining on two small curated corpora and an evaluation on four linguistic benchmarks.

Large collections of matrices arise throughout modern machine learning, signal processing, and scientific computing, where they are commonly compressed by concatenation followed by truncated singular value decomposition (SVD). This strategy enables parameter sharing and efficient reconstruction and has been widely adopted across domains ranging from multi-view learning and signal processing to neural network compression. However, it leaves a fundamental question unanswered: which matrices can be safely concatenated and compressed together under explicit reconstruction error constraints? Existing approaches rely on heuristic or architecture-specific grouping and provide no principled guarantees on the resulting SVD approximation error. In the present work, we introduce a theory-driven framework for compression-aware clustering of matrices under SVD compression constraints. Our analysis establishes new spectral bounds for horizontally concatenated matrices, deriving global upper bounds on the optimal rank-r SVD reconstruction error from lower bounds on singular value growth. The first bound follows from Weyl-type monotonicity under blockwise extensions, while the second leverages singular values of incremental residuals to yield tighter, per-block guarantees. We further develop an efficient approximate estimator based on incremental truncated SVD that tracks dominant singular values without forming the full concatenated matrix. Therefore, we propose three clustering algorithms that merge matrices only when their predicted joint SVD compression error remains below a user-specified threshold. The algorithms span a trade-off between speed, provable accuracy, and scalability, enabling compression-aware clustering with explicit error control. Code is available online.

Recently, Ainsworth et al. showed that using weight matching (WM) to minimize the L_2 distance in a permutation search of model parameters effectively identifies permutations that satisfy linear mode connectivity (LMC), in which the loss along a linear path between two independently trained models with different seeds remains nearly constant. This paper provides a theoretical analysis of LMC using WM, which is crucial for understanding stochastic gradient descent's effectiveness and its application in areas like model merging. We first experimentally and theoretically show that permutations found by WM do not significantly reduce the L_2 distance between two models and the occurrence of LMC is not merely due to distance reduction by WM in itself. We then provide theoretical insights showing that permutations can change the directions of the singular vectors, but not the singular values, of the weight matrices in each layer. This finding shows that permutations found by WM mainly align the directions of singular vectors associated with large singular values across models. This alignment brings the singular vectors with large singular values, which determine the model functionality, closer between pre-merged and post-merged models, so that the post-merged model retains functionality similar to the pre-merged models, making it easy to satisfy LMC. Finally, we analyze the difference between WM and straight-through estimator (STE), a dataset-dependent permutation search method, and show that WM outperforms STE, especially when merging three or more models.

The mixture model is undoubtedly one of the greatest contributions to clustering. For continuous data, Gaussian models are often used and the Expectation-Maximization (EM) algorithm is particularly suitable for estimating parameters from which clustering is inferred. If these models are particularly popular in various domains including image clustering, they however suffer from the dimensionality and also from the slowness of convergence of the EM algorithm. However, the Classification EM (CEM) algorithm, a classifying version, offers a fast convergence solution while dimensionality reduction still remains a challenge. Thus we propose in this paper an algorithm combining simultaneously and non-sequentially the two tasks --Data embedding and Clustering-- relying on Principal Component Analysis (PCA) and CEM. We demonstrate the interest of such approach in terms of clustering and data embedding. We also establish different connections with other clustering approaches.

In natural language processing, a recently popular line of work explores how to best report the experimental results of neural networks. One exemplar publication, titled "Show Your Work: Improved Reporting of Experimental Results," advocates for reporting the expected validation effectiveness of the best-tuned model, with respect to the computational budget. In the present work, we critically examine this paper. As far as statistical generalizability is concerned, we find unspoken pitfalls and caveats with this approach. We analytically show that their estimator is biased and uses error-prone assumptions. We find that the estimator favors negative errors and yields poor bootstrapped confidence intervals. We derive an unbiased alternative and bolster our claims with empirical evidence from statistical simulation. Our codebase is at http://github.com/castorini/meanmax.

Hidden-state probes effectively detect LLM hallucinations, but the geometry of the signal remains poorly characterized, driving increasingly complex probe architectures. Across three 7B-scale models and three datasets in a paired-example paradigm, we find the signal overwhelmingly dominated by a single mean-shift component, and removing this direction collapses detection to chance. Shrinkage linear discriminant analysis closes about 73% of the gap between 1D and full-dimensional classifiers, so apparent architectural complexity largely reflects high-dimensional covariance estimation difficulty rather than exploitable non-linearity. A simple L2-regularized logistic regression (0.952 AUROC) bounds or outperforms twelve controlled architectural alternatives, and our multi-layer aggregation exceeds CLAP cross-layer attention probing under matched paradigm. Because the signal spans a contiguous layer band, LayerMix aggregates it to match oracle-layer performance without oracle access. Our claims characterize the geometry within the controlled paired-example paradigm. Our code is available at https://github.com/js-lee-AI/LayerMix.

Accurate blind docking has the potential to lead to new biological breakthroughs, but for this promise to be realized, docking methods must generalize well across the proteome. Existing benchmarks, however, fail to rigorously assess generalizability. Therefore, we develop DockGen, a new benchmark based on the ligand-binding domains of proteins, and we show that existing machine learning-based docking models have very weak generalization abilities. We carefully analyze the scaling laws of ML-based docking and show that, by scaling data and model size, as well as integrating synthetic data strategies, we are able to significantly increase the generalization capacity and set new state-of-the-art performance across benchmarks. Further, we propose Confidence Bootstrapping, a new training paradigm that solely relies on the interaction between diffusion and confidence models and exploits the multi-resolution generation process of diffusion models. We demonstrate that Confidence Bootstrapping significantly improves the ability of ML-based docking methods to dock to unseen protein classes, edging closer to accurate and generalizable blind docking methods.

The back-to-back limit of the energy-energy correlator (EEC) exhibits a finite plateau, capturing the evolution from perturbative soft-collinear radiation at weak coupling to string dynamics at strong coupling. At weak coupling, we resum its leading and next-to-leading-power logarithms through N^3LL in mathcal N=4 SYM, including non-planar contributions. Combining this weak-coupling endpoint with bootstrap and strong-coupling data, we construct an interpolation for the plateau height from weak to strong coupling. The calculation uses a human-in-the-loop agentic workflow.

We consider the problem of graph matching, or learning vertex correspondence, between two correlated stochastic block models (SBMs). The graph matching problem arises in various fields, including computer vision, natural language processing and bioinformatics, and in particular, matching graphs with inherent community structure has significance related to de-anonymization of correlated social networks. Compared to the correlated Erdos-Renyi (ER) model, where various efficient algorithms have been developed, among which a few algorithms have been proven to achieve the exact matching with constant edge correlation, no low-order polynomial algorithm has been known to achieve exact matching for the correlated SBMs with constant correlation. In this work, we propose an efficient algorithm for matching graphs with community structure, based on the comparison between partition trees rooted from each vertex, by extending the idea of Mao et al. (2021) to graphs with communities. The partition tree divides the large neighborhoods of each vertex into disjoint subsets using their edge statistics to different communities. Our algorithm is the first low-order polynomial-time algorithm achieving exact matching between two correlated SBMs with high probability in dense graphs.

Statistical data fusion combines two panels that share a block of covariates but observe disjoint outcome blocks, and in its traditional form no row observes both outcomes at once. That rules out the discriminative criterion one would rather train a Deep Boltzmann Machine with, since multi-prediction training needs ground truth for whatever it holds out. We propose observed-block multi-prediction, which restricts the multi-prediction objective to targets drawn from what each row actually observes. It is well defined for any missingness pattern and reduces to the original criterion when rows are complete. Having a discriminative criterion that survives the setting lets us ask whether the joint model is needed at all, by separating what it contributes into a representation part and an inference part. On two consumer panels, on grids over sample size and covariate width spanning 35 cells and 875 runs, the fine-tuned DBM is the best of fifteen methods in every cell; but almost none of that advantage comes from generative pre-training, which is confined to the smallest sample size on one dataset and absent on the other. It comes from conditioning on one outcome block when predicting the other. This term amounts to +0.19 and +0.07 percentage points, is positive in all 35 cells, and, unlike every other contribution we measure, neither decays as the panels grow, nor requires a second hidden layer, nor requires more inference. Permuting one outcome block to destroy its association with the other removes the gain entirely, which is what the account predicts. The margins are small. But a small effect that does not decay is a different object from one that does, because it rests on evidence that no model mapping covariates to outcomes can accept.

Statistical inference for non-stationary data is hindered by the failure of classical central limit theorems (CLTs), not least because there is no fixed Gaussian limit to converge to. To resolve this, we introduce relative weak convergence, an extension of weak convergence that compares a statistic or process to a sequence of evolving processes. Relative weak convergence retains the essential consequences of classical weak convergence and coincides with it under stationarity. Crucially, it applies in general non-stationary settings where classical weak convergence fails. We establish concrete relative CLTs for random vectors and empirical processes, along with sequential, weighted, and bootstrap variants, that parallel the state-of-the-art in stationary settings. Our framework and results offer simple, plug-in replacements for classical CLTs whenever stationarity is untenable, as illustrated by applications in nonparametric trend estimation and hypothesis testing.

We study the problem of online clustering where a clustering algorithm has to assign a new point that arrives to one of k clusters. The specific formulation we use is the k-means objective: At each time step the algorithm has to maintain a set of k candidate centers and the loss incurred is the squared distance between the new point and the closest center. The goal is to minimize regret with respect to the best solution to the k-means objective (C) in hindsight. We show that provided the data lies in a bounded region, an implementation of the Multiplicative Weights Update Algorithm (MWUA) using a discretized grid achieves a regret bound of O(T) in expectation. We also present an online-to-offline reduction that shows that an efficient no-regret online algorithm (despite being allowed to choose a different set of candidate centres at each round) implies an offline efficient algorithm for the k-means problem. In light of this hardness, we consider the slightly weaker requirement of comparing regret with respect to (1 + ε) C and present a no-regret algorithm with runtime Oleft(T(poly(log(T),k,d,1/ε)^{k(d+O(1))}right). Our algorithm is based on maintaining an incremental coreset and an adaptive variant of the MWUA. We show that naïve online algorithms, such as Follow The Leader, fail to produce sublinear regret in the worst case. We also report preliminary experiments with synthetic and real-world data.

Recent progress in weakly supervised object detection is featured by a combination of multiple instance detection networks (MIDN) and ordinal online refinement. However, with only image-level annotation, MIDN inevitably assigns high scores to some unexpected region proposals when generating pseudo labels. These inaccurate high-scoring region proposals will mislead the training of subsequent refinement modules and thus hamper the detection performance. In this work, we explore how to ameliorate the quality of pseudo-labeling in MIDN. Formally, we devise Cyclic-Bootstrap Labeling (CBL), a novel weakly supervised object detection pipeline, which optimizes MIDN with rank information from a reliable teacher network. Specifically, we obtain this teacher network by introducing a weighted exponential moving average strategy to take advantage of various refinement modules. A novel class-specific ranking distillation algorithm is proposed to leverage the output of weighted ensembled teacher network for distilling MIDN with rank information. As a result, MIDN is guided to assign higher scores to accurate proposals among their neighboring ones, thus benefiting the subsequent pseudo labeling. Extensive experiments on the prevalent PASCAL VOC 2007 \& 2012 and COCO datasets demonstrate the superior performance of our CBL framework. Code will be available at https://github.com/Yinyf0804/WSOD-CBL/.

The k-Means clustering problem on n points is NP-Hard for any dimension dge 2, however, for the 1D case there exists exact polynomial time algorithms. Previous literature reported an O(kn^2) time dynamic programming algorithm that uses O(kn) space. It turns out that the problem has been considered under a different name more than twenty years ago. We present all the existing work that had been overlooked and compare the various solutions theoretically. Moreover, we show how to reduce the space usage for some of them, as well as generalize them to data structures that can quickly report an optimal k-Means clustering for any k. Finally we also generalize all the algorithms to work for the absolute distance and to work for any Bregman Divergence. We complement our theoretical contributions by experiments that compare the practical performance of the various algorithms.

The Combined Algorithm Selection and Hyperparameters optimization (CASH) problem is one of the fundamental problems in Automated Machine Learning (AutoML). Motivated by the success of ensemble learning, recent AutoML systems build post-hoc ensembles to output the final predictions instead of using the best single learner. However, while most CASH methods focus on searching for a single learner with the best performance, they neglect the diversity among base learners (i.e., they may suggest similar configurations to previously evaluated ones), which is also a crucial consideration when building an ensemble. To tackle this issue and further enhance the ensemble performance, we propose DivBO, a diversity-aware framework to inject explicit search of diversity into the CASH problems. In the framework, we propose to use a diversity surrogate to predict the pair-wise diversity of two unseen configurations. Furthermore, we introduce a temporary pool and a weighted acquisition function to guide the search of both performance and diversity based on Bayesian optimization. Empirical results on 15 public datasets show that DivBO achieves the best average ranks (1.82 and 1.73) on both validation and test errors among 10 compared methods, including post-hoc designs in recent AutoML systems and state-of-the-art baselines for ensemble learning on CASH problems.

We study the connection between multicalibration and boosting for squared error regression. First we prove a useful characterization of multicalibration in terms of a ``swap regret'' like condition on squared error. Using this characterization, we give an exceedingly simple algorithm that can be analyzed both as a boosting algorithm for regression and as a multicalibration algorithm for a class H that makes use only of a standard squared error regression oracle for H. We give a weak learning assumption on H that ensures convergence to Bayes optimality without the need to make any realizability assumptions -- giving us an agnostic boosting algorithm for regression. We then show that our weak learning assumption on H is both necessary and sufficient for multicalibration with respect to H to imply Bayes optimality. We also show that if H satisfies our weak learning condition relative to another class C then multicalibration with respect to H implies multicalibration with respect to C. Finally we investigate the empirical performance of our algorithm experimentally using an open source implementation that we make available. Our code repository can be found at https://github.com/Declancharrison/Level-Set-Boosting.

Visualizations for scattered data are used to make users understand certain attributes of their data by solving different tasks, e.g. correlation estimation, outlier detection, cluster separation. In this paper, we focus on the later task, and develop a technique that is aligned to human perception, that can be used to understand how human subjects perceive clusterings in scattered data and possibly optimize for better understanding. Cluster separation in scatterplots is a task that is typically tackled by widely used clustering techniques, such as for instance k-means or DBSCAN. However, as these algorithms are based on non-perceptual metrics, we can show in our experiments, that their output do not reflect human cluster perception. We propose a learning strategy which directly operates on scattered data. To learn perceptual cluster separation on this data, we crowdsourced a large scale dataset, consisting of 7,320 point-wise cluster affiliations for bivariate data, which has been labeled by 384 human crowd workers. Based on this data, we were able to train ClusterNet, a point-based deep learning model, trained to reflect human perception of cluster separability. In order to train ClusterNet on human annotated data, we use a PointNet++ architecture enabling inference on point clouds directly. In this work, we provide details on how we collected our dataset, report statistics of the resulting annotations, and investigate perceptual agreement of cluster separation for real-world data. We further report the training and evaluation protocol of ClusterNet and introduce a novel metric, that measures the accuracy between a clustering technique and a group of human annotators. Finally, we compare our approach against existing state-of-the-art clustering techniques and can show, that ClusterNet is able to generalize to unseen and out of scope data.

Some security-development settings require local models that map an objective to an ordered, checkable plan. We present a low-rank decomposition adapter and release a case-disjoint corpus with 24 authored decompositions and 83 derived next-step examples across 24 satellite-security cases. To prevent reference-plan leakage, prompts contain one objective and eight shuffled SPARTA candidates. The evaluation candidate sets are constructed with oracle inclusion of every reference technique, so this study measures selection from a controlled set, not retrieval. On six fixed cases and five decoding seeds, mean scores vary across adapters and prompted Qwen2.5 baselines; a separate greedy check over three adapter training seeds shows non-negligible training variance. A 24-fold greedy leave-one-case-out control at the two compact sizes likewise shows tradeoffs: at 1.5B, adapter precision is 0.583 against 0.480 for two-shot prompting, while recall is 0.586 against 0.660. Case-resampling intervals for adapter precision relative to the strongest prompted baseline cross zero at 1.5B and 7B. The adapter is also substantially more format-compliant, which prevents attributing all score differences to selection. Autoregressive next-step accuracy is 0.08, 0.06, and 0.29 at 0.5B, 1.5B, and 7B. We therefore offer the formulation, leakage-controlled dataset, reproducibility package, and descriptive analysis as a proof of concept, not evidence of a reliable stand-alone decomposition system or a general adapter advantage. A separate diagnostic tests contract reuse.

Clustering tabular data remains a significant open challenge in data analysis and machine learning. Unlike for image data, similarity between tabular records often varies across datasets, making the definition of clusters highly dataset-dependent. Furthermore, the absence of supervised signals complicates hyperparameter tuning in deep learning clustering methods, frequently resulting in unstable performance. To address these issues and reduce the need for per-dataset tuning, we adopt an emerging approach in deep learning: zero-shot learning. We propose ZEUS, a self-contained model capable of clustering new datasets without any additional training or fine-tuning. It operates by decomposing complex datasets into meaningful components that can then be clustered effectively. Thanks to pre-training on synthetic datasets generated from a latent-variable prior, it generalizes across various datasets without requiring user intervention. To the best of our knowledge, ZEUS is the first zero-shot method capable of generating embeddings for tabular data in a fully unsupervised manner. Experimental results demonstrate that it performs on par with or better than traditional clustering algorithms and recent deep learning-based methods, while being significantly faster and more user-friendly.

The retina offers a noninvasive window into neurodegenerative disease, capturing subtle structural patterns associated with a risk of future cognitive decline. Vision-language alignment frameworks such as REVEAL have shown that pairing retinal fundus images with structured clinical risk narratives improves early prediction of Alzheimer's disease (AD). A key design choice in these approaches is the use of phenotypic grouping, where individuals with similar risk profiles are treated as multi-positive pairs during contrastive learning. However, existing methods operationalize phenotypic similarity as a discrete construct, relying on hard group assignments that impose rigid supervision and decouple group formation from representation learning. We propose a continuous formulation of phenotypic structure within contrastive learning. Rather than assigning samples to fixed clusters, we model inter-subject similarity as a differentiable weighting function derived from intra-modality embedding similarities in both retinal images and risk profiles. These weights define soft multi-positive relationships through a continuous aggregation operator, enabling graded supervision that reflects the spectrum nature of disease risk. We further introduce a soft-target contrastive objective that jointly learns cross-modal alignment and phenotypic structure in an end-to-end manner. Evaluated on UK Biobank retinal imaging data for incident AD prediction, the proposed framework consistently outperforms discrete group-based contrastive learning and standard vision-language baselines. By treating phenotypic similarity as a learnable, continuous signal rather than a fixed grouping rule, our approach provides a principled and robust foundation for population-scale neurodegenerative risk modeling from multi-modal retinal and clinical data.

Lloyd's k-means algorithm is one of the most widely used clustering methods. We prove that in high-dimensional, high-noise settings, the algorithm exhibits catastrophic failure: with high probability, essentially every partition of the data is a fixed point. Consequently, Lloyd's algorithm simply returns its initial partition - even when the underlying clusters are trivially recoverable by other methods. In contrast, we prove that Hartigan's k-means algorithm does not exhibit this pathology. Our results show the stark difference between these algorithms and offer a theoretical explanation for the empirical difficulties often observed with k-means in high dimensions.

Clustering is central to many data-driven application domains and has been studied extensively in terms of distance functions and grouping algorithms. Relatively little work has focused on learning representations for clustering. In this paper, we propose Deep Embedded Clustering (DEC), a method that simultaneously learns feature representations and cluster assignments using deep neural networks. DEC learns a mapping from the data space to a lower-dimensional feature space in which it iteratively optimizes a clustering objective. Our experimental evaluations on image and text corpora show significant improvement over state-of-the-art methods.