Daily Papers

Speculative decoding accelerates LLM inference by verifying multiple drafted tokens in parallel, allowing a single target forward pass to accept several tokens. By construction, verification computes representations for both accepted and rejected tokens. Yet, conventional drafters retain only the representations of accepted tokens, leaving the substantial verifier computation spent on rejected tokens effectively wasted. We find that these discarded hidden states generated during target forward retain useful information about future tokens that can improve subsequent drafts. However, realizing this opportunity poses two distinct challenges. At inference, recycling overhead can increase drafting latency, diminishing the speedup gained from increased acceptance length. During training, standard parallel drafter training does not produce inference-aligned rejected states, while obtaining them through sequential rollouts would sacrifice parallelism across training positions. We introduce Carryover Drafting, which addresses both challenges. Carryover recycles rejected target hidden states as temporary KV context, allowing the drafter to selectively attend to them. It reuses the drafter's existing interface and adds only a single learned embedding to distinguish rejected states from committed context. The additional KV context is replaced each drafting round, keeping its length bounded by one proposal block. We introduce parallel draft--verify--draft training that exposes the drafter to inference-aligned rejected states while preserving parallelism across training positions. Experiments with DFlash and a DSpark-derived semi-autoregressive drafter across two target models show that this simple Carryover mechanism improves average acceptance length by 6.5--14.7% and end-to-end vLLM speedup by 7.9--14.4% over the corresponding baselines, with speedup gains reaching 28.8% on translation.

Document parsing is a fundamental task in multimodal understanding, supporting a wide range of downstream applications such as information extraction and intelligent document analysis. Benefiting from strong semantic modeling and robust generalization, VLM-based end-to-end approaches have emerged as the mainstream paradigm in recent years. However, these models often suffer from substantial inference latency, as they must auto-regressively generate long token sequences when processing long-form documents. In this work, motivated by the extremely long outputs and complex layout structures commonly found in document parsing, we propose a training-free and highly efficient acceleration method. Inspired by speculative decoding, we employ a lightweight document parsing pipeline as a draft model to predict batches of future tokens, while the more accurate VLM verifies these draft predictions in parallel. Moreover, we further exploit the layout-structured nature of documents by partitioning each page into independent regions, enabling parallel decoding of each region using the same draft-verify strategy. The final predictions are then assembled according to the natural reading order. Experimental results demonstrate the effectiveness of our approach: on the general-purpose OmniDocBench, our method provides a 2.42x lossless acceleration for the dots.ocr model, and achieves up to 4.89x acceleration on long-document parsing tasks. We will release our code to facilitate reproducibility and future research.

Speculative decoding accelerates memory-bound LLM inference without quality degradation by using a fast drafter to propose multiple candidate tokens and the target model to verify them in parallel. However, conventional sequential speculative decoding suffers from mutual waiting between drafting and verification, and repeated exchange of intermediate states further increases memory access overhead. Parallel speculative decoding addresses this limitation by performing drafting and verification within a single target forward pass, allowing future drafts to be prepared while current candidates are being verified. Although effective at small batch sizes, existing parallel speculative decoding methods either require costly continual pretraining with quality degradation or suffer from low acceptance rates. More importantly, this paradigm inherently suffers from uncertainty in both the bonus token and the accepted length, leading to draft verification mismatch and causing throughput gains to collapse at large batch sizes. To address these limitations, we introduce FlexDraft, a lossless speculative decoding framework that flexibly adapts to varying batch sizes through three key designs. (1) Attention Tuning enables block diffusion drafting by tuning only the attention projectors of the final few layers on mask tokens, while keeping the autoregressive path frozen to preserve the target distribution and produce high quality drafts with minimal trainable parameters. (2) Bonus-guided Calibration uses a lightweight MLP conditioned on the resolved bonus token to calibrate draft logits, mitigating draft verification mismatch caused by bonus token uncertainty. (3) Flex Decoding dynamically switches between parallel draft and verify at small batch sizes and sequential draft then verify at large batch sizes, and adjusts verification length based on draft confidence to eliminate redundant computation.

Speculative decoding mitigates the latency of sequential generation in autoregressive Large Language Models (LLMs) by interleaving draft generation with target verification. However, existing parallel drafting backends often suffer from rapid accuracy degradation over long horizons, leading to high rejection rates during verification and suboptimal wall-clock speedups. We observe that drafting errors are not uniformly distributed but typically stem from localized high-uncertainty tokens that destabilize downstream generation trajectories. Motivated by this token error pattern, we propose CURE, a budget-aware dynamic repair tree designed to repair errors at uncertainty focal points without incurring prohibitive tree-verification overheads. Specifically, our method uses predictive confidence margins to dynamically locate candidate error tokens within a block-parallel draft, expands bounded repair paths only at these fragile nodes, and employs a novel repair resynchronization mechanism to realign draft states post-verification. Evaluations on code-generation benchmarks (HumanEval, MBPP, and LiveCodeBench-lite) and mathematical reasoning benchmark (GSM8K) demonstrate that CURE increases the average accepted length by 4.2-7.5% over parallel baselines without repair, translating to an end-to-end speedup of 2.66-3.49times over target-only decoding. Furthermore, we provide a plug-and-play repair module compatible with standard parallel drafting frameworks. We also characterize the trade-off between draft compute and verification efficiency.

Speculative decoding accelerates autoregressive generation in large language models. In each drafting stage, a lightweight draft model proposes tokens that the target model subsequently verifies. With increasingly capable draft models, we find that the target model frequently accepts all tokens produced in a drafting stage. A verification nevertheless follows each drafting stage, resulting in unnecessary target-model forward passes even when drafting could have continued. Adaptive draft length methods decide during decoding how many draft tokens precede a verification, but they raise the speedup only for autoregressive draft models. For a parallel draft model, drafting further requires target-model hidden states for draft tokens that have not been verified. We propose DLoop, a looped form of speculative decoding that adaptively performs multiple drafting stages before verification. DLoop continues drafting while the draft model remains confident and verifies all accumulated draft tokens together. Loop-aware training keeps the draft model reliable in the additional drafting stages by exposing it to its own hidden states for unverified draft tokens. By spending additional draft-model forward passes, DLoop reduces the number of target-model forward passes required for verification. Across diverse speculative decoding methods including EAGLE-3, DFlash, Domino, DSpark, and multi-token prediction modules, DLoop improves the wall-clock speedup by 5 to 41 percent while preserving lossless decoding. Code will be available at https://github.com/naver-ai/DLoop.

Speculative decoding accelerates LLM inference by drafting a tree of candidate continuations and verifying it in one target forward. Existing drafters fall into two camps with opposite weaknesses. Autoregressive drafters such as EAGLE-3 preserve dependence along each draft path but call the drafter once per tree depth, making drafting a non-trivial share of per-iteration latency. Parallel drafters cut drafter calls by predicting multiple future positions in one forward, but each position is predicted without seeing the others, producing paths the verifier rejects. In this paper, we propose SpecBlock, a block-iterative drafter that combines path dependence with cheap drafting. Each drafter forward produces K dependent positions and we call this a block. The draft tree grows through repeated block expansions. Two mechanisms explicitly carry path dependence to keep later draft positions accurate. Within each block, a layer-wise shift carries the previous position's hidden state into every decoder layer. Across blocks, each new block can start from any position of the previous block, inheriting its hidden state to extend the path. To spend verifier budget where acceptance is likely, a co-trained rank head replaces the fixed top-k tree by allocating per-position branching during drafting. To avoid training the drafter on prefixes it never produces at inference, a valid-prefix mask drops the loss at later positions once an earlier one is wrong. Beyond static drafting, a cost-aware bandit at deployment uses free verifier feedback to update the drafter selectively, only when the expected throughput gain exceeds the update cost. Experiments show that SpecBlock improves mean speedup by 8-13% over EAGLE-3 at 44-52% of its drafting cost, and cost-aware adaptation extends this lead to 11-19%.

Speculative decoding (SD), where an extra draft model is employed to provide multiple draft tokens first and then the original target model verifies these tokens in parallel, has shown great power for LLM inference acceleration. However, existing SD methods suffer from the mutual waiting problem, i.e., the target model gets stuck when the draft model is guessing tokens, and vice versa. This problem is directly incurred by the asynchronous execution of the draft model and the target model, and is exacerbated due to the fixed draft length in speculative decoding. To address these challenges, we propose a conceptually simple, flexible, and general framework to boost speculative decoding, namely Parallel spEculative decoding with Adaptive dRaft Length (PEARL). Specifically, PEARL proposes pre-verify to verify the first draft token in advance during the drafting phase, and post-verify to generate more draft tokens during the verification phase. PEARL parallels the drafting phase and the verification phase via applying the two strategies, and achieves adaptive draft length for different scenarios, which effectively alleviates the mutual waiting problem. Moreover, we theoretically demonstrate that the mean accepted tokens of PEARL is more than existing draft-then-verify works. Experiments on various text generation benchmarks demonstrate the effectiveness of our \name, leading to a superior speedup performance up to 3.79times and 1.52times, compared to auto-regressive decoding and vanilla speculative decoding, respectively.

Speculative decoding accelerates large language model (LLM) inference without compromising output quality. Recent parallel drafting methods further improve single-request performance by decoupling draft length from drafting latency, enabling longer drafts and higher mean accepted tokens (MAT). However, under high request concurrency, long drafts waste substantial computation on rejected tokens, increasing verification cost and potentially making speculative decoding slower than autoregressive decoding. We present D-Cut, an adaptive pruning method that selects draft tokens jointly across the batch and concentrates the verification budget on tokens most likely to be accepted. D-Cut is motivated by two observations. First, acceptance lengths vary considerably across concurrent requests; D-Cut therefore performs cross-request pruning, allocating the verification budget adaptively according to draft confidence. Second, verification cost depends strongly on the deployment environment, including GPU architecture and parallelism strategy; D-Cut incorporates a runtime cost model to adapt its pruning depth to the target environment. Experiments on dense and mixture-of-experts (MoE) models show that, under high concurrency, D-Cut improves the average speedup from \(1.26\times\) to \(1.65\times\), restores acceleration in dense-model configurations where long-draft baselines are slower than autoregressive decoding, and achieves up to \(3.0\times\) speedup over autoregressive decoding on MoE models.

The autoregressive nature of large language models (LLMs) limits inference speed. Each forward pass generates only a single token and is often bottlenecked by memory bandwidth. Speculative decoding alleviates this issue using a draft-then-verify approach to accelerate token generation. However, the overhead introduced during the draft phase and the training cost of the draft model limit the efficiency and adaptability of speculative decoding. In this work, we introduce PARallel Draft (PARD), a novel speculative decoding method that enables low-cost adaptation of autoregressive draft models into parallel draft models. PARD enhances inference efficiency by predicting multiple future tokens in a single forward pass of the draft phase, and incorporates a conditional drop token method to accelerate training. Its target-independence property allows a single draft model to be applied to an entire family of different models, minimizing the adaptation cost. Our proposed conditional drop token method can improves draft model training efficiency by 3x. On our optimized inference framework, PARD accelerates LLaMA3.1-8B inference by 4.08x, achieving 311.5 tokens per second.

Speculative decoding accelerates large language model inference by using a draft model to generate candidate tokens, which are verified by the target model in a single forward pass. Verification proceeds sequentially and discards every position from the first rejection onward, yet existing draft training relies on token-level imitation of the target with a fixed per-position weighting that reflects neither property. We introduce Verification-Aware Training (VAT), a plug-in framework that simulates verification at every training step and turns the resulting accept and reject patterns into supervision. VAT consists of two components: (i) a verification head, a lightweight jointly trained binary classifier that supervises the draft model on whether each position survives sequential verification; (ii) verification-adaptive weighting, which replaces the fixed weighting schedule by keeping full weight up to each sample's first rejection point and re-anchoring the decay to start there. VAT modifies only the training objective, so it can be layered on top of existing methods without changing the draft architecture, the target model, or the inference procedure. Applied to EAGLE-3 and DFlash on Qwen3-4B, Qwen3-8B, and LLaMA-3.1-8B, VAT improves average acceptance length by up to 11.4% and wall-clock speedup by up to 8.7%, with consistent gains across math, code, and chat benchmarks. Code will be available at https://github.com/naver-ai/vat

Using a diffusion model for parallel drafting is a promising approach for speculative decoding. By predicting tokens at multiple future positions in a single forward pass, diffusion drafters substantially reduce drafting latency. However, this shifts the bottleneck to verification: verifying a single sequence limits acceptance length, while verifying large draft trees incurs excessive target-model latency. We identify a key mismatch in existing draft-tree methods: existing diffusion-tree methods rank nodes by the marginal probability, ignoring that verification is prefix-conditioned. As a result, they may verify unreachable descendants of rejected prefixes, increasing latency with limited acceptance gains. To address this, we propose TAPS, a target-aware prefix selection method that turns diffusion marginals into path-conditioned acceptance estimates. TAPS then selects a compact prefix-closed subtree under a fixed verification budget, improving the acceptance-cost tradeoff rather than simply expanding the draft tree. Experiments across diverse datasets and model families demonstrate that TAPS achieves up to 7.9x lossless end-to-end speedup over vanilla autoregressive decoding, outperforming state-of-the-art DFlash and DDTree by 1.36x and 1.74x respectively. Our work is available at https://anonymous.4open.science/r/TAPS-EMNLP2026-53DD

Speculative decoding is an effective and lossless method for Large Language Model (LLM) inference acceleration. It employs a smaller model to generate a draft token sequence, which is then verified by the original base model. In multi-GPU systems, inference latency can be further reduced through tensor parallelism (TP), while the optimal TP size of the draft model is typically smaller than that of the base model, leading to GPU idling during the drafting stage. To solve this problem, we propose EasySpec, a layer-parallel speculation strategy that optimizes the efficiency of multi-GPU utilization.EasySpec breaks the sequential execution order of layers in the drafting model, enabling multi-layer parallelization across devices, albeit with some induced approximation errors. After each drafting-and-verification iteration, the draft model's key-value (KV) cache is calibrated in a single forward pass, preventing long-term error accumulation at minimal additional latency. We evaluated EasySpec on several mainstream open-source LLMs, using smaller versions of models from the same series as drafters. The results demonstrate that EasySpec can achieve a peak speedup of 4.17x compared to vanilla decoding, while preserving the original distribution of the base LLMs. Specifically, the drafting stage can be accelerated by up to 1.62x with a maximum accuracy drop of only 7%, requiring no training or fine-tuning on the draft models.

Speculative decoding (SD) addresses the high inference costs of LLMs by having lightweight drafters generate candidates for large verifiers to validate in parallel. Existing draft-verify methods use binary decisions: accept or fully recompute. Yet we find that many rejected tokens can be verified correctly by a slim submodel derived from the full verifier via intra-model routing, instead of the full verifier. This motivates our slim-verifier to handle tokens requiring moderate verification resources, reducing expensive large-model calls. We propose Verification via Intra-Model Routing for Speculative Decoding (VIA-SD), a multi-tier framework using a routed slim-verifier. Draft tokens are processed hierarchically: direct acceptance for high-confidence cases, slim-verifier regeneration for medium-confidence cases, and full-model verification for uncertain cases. Across four representative tasks and multiple model families, VIA-SD reduces rejection rates by 0.10-0.22 and delivers 10-20% speedups over strong SD baselines, while achieving 2.5-3x acceleration over non-drafting decoding. Moreover, VIA-SD is compatible with existing SD frameworks without modifying their training procedures. Our results suggest multi-tier SD as a general paradigm for scalable and efficient LLM inference. Project page: https://zju-xyc.github.io/VIA-SD-Project-Page/

Speculative decoding has proven to be an efficient solution to large language model (LLM) inference, where the small drafter predicts future tokens at a low cost, and the target model is leveraged to verify them in parallel. However, most existing works still draft tokens auto-regressively to maintain sequential dependency in language modeling, which we consider a huge computational burden in speculative decoding. We present ParallelSpec, an alternative to auto-regressive drafting strategies in state-of-the-art speculative decoding approaches. In contrast to auto-regressive drafting in the speculative stage, we train a parallel drafter to serve as an efficient speculative model. ParallelSpec learns to efficiently predict multiple future tokens in parallel using a single model, and it can be integrated into any speculative decoding framework that requires aligning the output distributions of the drafter and the target model with minimal training cost. Experimental results show that ParallelSpec accelerates baseline methods in latency up to 62% on text generation benchmarks from different domains, and it achieves 2.84X overall speedup on the Llama-2-13B model using third-party evaluation criteria.

Large language models (LLMs) exhibit exceptional performance across a wide range of tasks; however, their token-by-token autoregressive generation process significantly hinders inference speed. Speculative decoding presents a promising draft-then-verify framework that reduces generation latency while maintaining output distribution fidelity. Nevertheless, the draft model introduces additional computational overhead, becoming a performance bottleneck and increasing the time to first token (TTFT). Previous approaches to mitigate draft model overhead have primarily relied on heuristics and generally failed to match the quality of the draft language models. To address these challenges, we propose DuoDecoding, a novel approach that strategically deploys the draft and target models on the CPU and GPU respectively, enabling parallel decoding while preserving draft quality. Our method incorporates a hardware-aware optimal draft budget to minimize idle times and employs dynamic multi-sequence drafting to enhance draft quality. Extensive experiments across seven tasks show that DuoDecoding achieves up to 2.61x speedup in generation latency, while reducing TTFT to 83% of that in conventional speculative decoding. The Code is available at https://github.com/KaiLv69/DuoDecoding.

Reasoning LLMs produce longer outputs, requiring speculative decoding drafters trained on extended sequences. Parallel drafting - predicting multiple tokens per forward pass - offers latency benefits over sequential generation, but training complexity scales quadratically with the product of sequence length and parallel positions, rendering long-context training impractical. We present P(arallel)-EAGLE, which transforms EAGLE from autoregressive to parallel multi-token prediction via a learnable shared hidden state. To scale training to long contexts, we develop a framework featuring attention mask pre-computation and sequence partitioning techniques, enabling gradient accumulation within individual sequences for parallel-prediction training. We implement P-EAGLE in vLLM and demonstrate speedups of 1.10-1.36x over autoregressive EAGLE-3 across GPT-OSS 120B, 20B, and Qwen3-Coder 30B.

Speculative decoding accelerates LLM inference by having a small drafter propose tokens that a larger target model verifies in parallel. Recent diffusion-based parallel drafters such as DFlash predict the full B-token block in one forward pass, enabling deeper drafters and longer accepted blocks. However, existing multi-token drafter objectives often use fixed position-dependent weighting schedules, such as head-dependent weights or block-position decays, which do not adapt as the positions limiting acceptance change during training. To address this, we derive per-position training weights from a differentiable surrogate of expected accepted draft length, matching the weight of each position to its log-probability gradient contribution. The resulting loss, D-PACE (Dynamic Position-Aware Cross-Entropy), shifts training signal toward positions that currently limit acceptance as the drafter improves. Across six benchmarks, two Qwen3-4B draft depths, two decoding temperatures, and two additional target models, D-PACE consistently improves both wall-clock speedup and average emitted length, with 2.3\% measured training-time overhead and no changes to the drafter architecture or inference procedure.

Speculative decoding accelerates rollout generation, which dominates the cost of reinforcement learning (RL) post-training. Online co-training can further increase the draft's accuracy, yielding greater speedups. However, scaling this approach to co-training on large models with long contexts poses two obstacles: (1) branch attention is unsupported by standard causal context-parallel (CP) implementations, and (2) target features span across pipeline-parallel (PP) stages. We address both with an end-to-end system for large-scale online draft co-training. For CP, we extend packed, load-balanced zigzag ring attention by merging rank-local branch attention with causal main-sequence attention. For PP, TapChannel transports intermediate target features across stages via a separate path, leaving the pipeline schedule unaffected. Experiments demonstrate that co-trained drafts closely track the policy baseline while delivering substantial rollout and end-to-end speedups across model scales up to 122B. Our CP design achieves strong scaling at 256K tokens with significant memory savings over prior work, and our PP transport incurs modest overhead. Code can be found at https://github.com/NVIDIA-NeMo/RL/issues/3698.

Large language models (LLMs) suffer from high inference latency due to the auto-regressive decoding process. Speculative decoding accelerates inference by generating multiple draft tokens using a lightweight model and verifying them in parallel. However, existing verification methods rely heavily on distributional consistency while overlooking semantic correctness, thereby limiting the potential speedup of speculative decoding. While some methods employ additional models for relaxed verification of draft tokens, they often fail to generalize effectively to more diverse or open-domain settings. In this work, we propose Reflective Verification, a training-free and semantics-aware approach that achieves a better trade-off between correctness and efficiency. Specifically, we leverage the inherent reflective capacity of LLMs to semantically assess the correctness of draft tokens in parallel during verification. Using prompt-based probing, we obtain both the original and reflective distributions of draft tokens in a single forward pass. The fusion of these distributions enables semantic-level verification of draft tokens that incorporates both consistency and correctness. Experiments across multiple domain benchmarks and model scales demonstrate that our method significantly increases the acceptance length of draft tokens without compromising model performance. Furthermore, we find that the proposed Reflective Verification is orthogonal to existing statistical verification methods, and their combination yields additional 5sim15\% improvements in decoding speed.

Speculative decoding accelerates autoregressive generation by letting a lightweight draft model propose future tokens that a larger target model then verifies in parallel. In practice, however, draft models are usually trained on broad generic corpora, which leaves it unclear how much speculative decoding quality depends on the draft training distribution. We study this question with lightweight HASS and EAGLE-2 drafters trained on MathInstruct, ShareGPT, and mixed-data variants, evaluated on MT-Bench, GSM8K, MATH-500, and SVAMP. Measured by acceptance length, task-specific training yields clear specialization: MathInstruct-trained drafts are strongest on reasoning benchmarks, while ShareGPT-trained drafts are strongest on MT-Bench. Mixed-data training improves robustness, but larger mixtures do not dominate across decoding temperatures. We also study how to combine specialized drafters at inference time. Naive checkpoint averaging performs poorly, whereas confidence-based routing improves over single-domain drafts and merged-tree verification yields the highest acceptance length overall for both backbones. Finally, confidence is a more useful routing signal than entropy: rejected tokens tend to have higher entropy, but confidence produces much clearer benchmark-level routing decisions. These results show that speculative decoding quality depends not only on draft architecture, but also on the match between draft training data and downstream workload, and that specialized drafters are better combined at inference time than in weight space.

Autoregressive decoding is bottlenecked by its sequential nature. Speculative decoding has become a standard way to accelerate inference by using a fast draft model to predict upcoming tokens from a slower target model, and then verifying them in parallel with a single target model forward pass. However, speculative decoding itself relies on a sequential dependence between speculation and verification. We introduce speculative speculative decoding (SSD) to parallelize these operations. While a verification is ongoing, the draft model predicts likely verification outcomes and prepares speculations pre-emptively for them. If the actual verification outcome is then in the predicted set, a speculation can be returned immediately, eliminating drafting overhead entirely. We identify three key challenges presented by speculative speculative decoding, and suggest principled methods to solve each. The result is Saguaro, an optimized SSD algorithm. Our implementation is up to 2x faster than optimized speculative decoding baselines and up to 5x faster than autoregressive decoding with open source inference engines.

Parallel speculative drafting generates multiple candidates in one backbone pass, but independent token selection can produce inconsistent continuations that shorten the accepted prefix. Existing methods mostly leave conditional decoding to a lightweight module after the backbone, which limits the flow of predecessor information to successors. Our analysis of DFlash shows that early positions already form recoverable predictions in shallow layers, and that accurate adjacent predecessors help successors more when they enter earlier. We therefore propose DSpine, a drafter with causal conditioning injection throughout the backbone: at every layer, gated adjacent injection writes each predecessor's predicted feature into its successor, so the causal conditioning chain unfolds over network depth while all positions update in parallel. A unified transfer space built from the target model's output embeddings unifies layer-wise injection with predecessor-conditioned decoding, and layer-wise output-embedding supervision promotes the formation of predicted features in shallow layers. Fused kernels and a transition cache execute both efficiently in parallel within SGLang. Across seven math, code, and chat benchmarks, DSpine achieves the longest acceptance length at both temperatures on Qwen3-4B and Qwen3-8B. At temperature zero on Qwen3-8B, it raises the seven-benchmark mean from DFlash's 3.77 to 4.82 (+27.8%); in SGLang serving tests, it delivers 23.3% higher throughput than DFlash on average.

Speculative decoding accelerates Large Language Model (LLM) inference by decoupling draft generation from target verification. While recent parallel drafters efficiently propose long token sequences in a single forward pass, they suffer from rapid acceptance decay due to a lack of inter-token dependencies. Furthermore, indiscriminately verifying these extended blocks wastes critical batch capacity on tokens with high rejection risks, severely degrading throughput in high-concurrency serving systems. We introduce DSpark, a speculative decoding framework that unifies high-throughput parallel generation with adaptive, load-aware verification. To maintain draft quality, DSpark utilizes a semi-autoregressive architecture, coupling a parallel backbone with a lightweight sequential module, to introduce intra-block dependency modeling and mitigate suffix decay. To optimize system efficiency, DSpark employs confidence-scheduled verification, dynamically tailoring the verification length for each request based on estimated prefix survival probabilities and engine-specific throughput profiles. On offline benchmarks across diverse domains, DSpark substantially improves the accepted length over state-of-the-art autoregressive and parallel drafters. When deployed within the DeepSeek-V4 serving system under live user traffic, DSpark successfully mitigates verification waste. Compared to the established production baseline (MTP-1), DSpark accelerates per-user generation speeds by 60 to 85 percent at matched throughput levels. More importantly, by preventing severe throughput degradation under strict interactivity constraints, it enables performance tiers that were previously unattainable, shifting the Pareto frontier of our serving system.

Tree-based speculative decoding verifies multiple draft continuations in one target-model pass, but finite trees built from draft scores face a fundamental draft-target mismatch. We ask whether better exact verification can increase acceptance on a fixed tree and how target feedback can improve the tree itself. Through a target-flow view, we identify a canonical exit law and prove that one plus target coverage sharply bounds the expected output-block length, including the bonus token, of any exact path verifier. All optimal verifiers share the same exit and bonus-token law, already attained by representative predraw-and-follow and sequential residual verifiers. This yields Tree Exit Verification (TEV), an exact, level-parallel procedure using one exit-node decision and one bonus-token decision. The exit law also identifies missing target probability, providing node-level feedback for Exit-Guided Draft-Tree Training (ExitTrain) on inference-time draft trees. Experiments across dialogue, code, and mathematical reasoning validate fixed-tree equivalence: ExitTrain increases average output-block length by 13%, while TEV reduces verifier-stage latency by 15%, yielding a 14% end-to-end speedup over DDTree. Our results distinguish two opportunities: better draft trees for higher acceptance and more direct verification for lower latency. Code: https://github.com/hsj576/TEV.

We propose a novel speculative decoding method tailored for multi-sample reasoning scenarios, such as self-consistency and Best-of-N sampling. Our method exploits the intrinsic consensus of parallel generation paths to synthesize high-quality draft tokens without requiring auxiliary models or external databases. By dynamically analyzing structural patterns across parallel reasoning paths through a probabilistic aggregation mechanism, it identifies consensus token sequences that align with the decoding distribution. Evaluations on mathematical reasoning benchmarks demonstrate a substantial improvement in draft acceptance rates over baselines, while reducing the latency in draft token construction. This work establishes a paradigm shift for efficient multi-sample inference, enabling seamless integration of speculative decoding with sampling-based reasoning techniques.

Drafting-then-verifying decoding methods such as speculative decoding are widely adopted training-free methods to accelerate the inference of large language models (LLMs). Instead of employing an autoregressive process to decode tokens sequentially, speculative decoding initially creates drafts with an efficient small model. Then LLMs are required to conduct verification and correction in a non-autoregressive fashion to minimize time overhead. Generating longer drafts can lead to even more significant speedups once verified, but also incurs substantial trial and error costs if it fails. Suffering from the high verification failure probability, existing decoding methods cannot draft too much content for verification at one time, achieving sub-optimal inference acceleration. In this paper, we introduce Ouroboros, which constructs a phrase candidate pool from the verification process of LLMs to provide candidates for draft generation of the small model. Thereby, Ouroboros can further improve the efficiency and effectiveness of the initial drafts. The experimental results on typical text generation tasks show that Ouroboros achieves speedups of up to 1.9x and 2.8x compared to lookahead decoding and speculative decoding, respectively. The source code of Ouroboros is available at https://github.com/thunlp/Ouroboros.

Parallel Speculative Decoding (PSD) accelerates traditional Speculative Decoding (SD) by overlapping draft generation with verification. However, it remains hampered by two fundamental challenges: (1) a theoretical speedup ceiling dictated by the speed ratio between the draft and target models, and (2) high computational waste and pipeline stall due to mid-sequence token rejections of early errors. To address these limitations, we introduce Double (Double Retrieval Speculative Parallelism). By bridging the gap between SD and PSD, our framework resolves the Retrieval Precision-Efficiency Dilemma through a novel synchronous mechanism. Specifically, we enable the draft model to execute iterative retrieval speculations to break the theoretical speedup limits; to alleviate rejections without rollback, the target model performs authoritative retrieval to generate multi-token guidance. Double is entirely training-free and lossless. Extensive experiments demonstrate state-of-the-art speedup of 5.3times on LLaMA3.3-70B and 2.8times on Qwen3-32B, significantly outperforming the advanced method EAGLE-3 that requires extensive model training.

Speculative decoding (SD) has emerged as a promising technique to accelerate LLM inference by employing a small draft model to propose draft tokens in advance, and validating them in parallel with the large target model. However, the existing SD methods still remain constrained by their serialized execution, which causes the mutual waiting bubbles between the draft and target models. To address this challenge, we draw inspiration from branch prediction in modern processors and propose a novel framework SpecBranch to unlock branch parallelism in SD. Specifically, we first take an in-depth analysis of the potential of branch parallelism in SD, and recognize that the key challenge lies in the trade-offs between parallelization and token rollback. Based on the analysis, we introduce parallel speculative branches to preemptively hedge against likely rejections. Meanwhile, to enhance parallelism, we jointly orchestrate adaptive draft lengths with a hybrid combination of the implicit draft model confidence and explicit reusing of target model features. Extensive experiments across various models and benchmarks show that SpecBranch achieves over 1.8times sim 4.5times speedups against the auto-regressive decoding and reduces rollback tokens by 50\% for poorly aligned models, while maintaining an identical sampling distribution.

Parallel diffusion decoding can accelerate diffusion language model inference by unmasking multiple tokens per step, but aggressive parallelism often harms quality. Revocable decoding mitigates this by rechecking earlier tokens, yet we observe that existing verification schemes frequently trigger flip-flop oscillations, where tokens are remasked and later restored unchanged. This behaviour slows inference in two ways: remasking verified positions weakens the conditioning context for parallel drafting, and repeated remask cycles consume the revision budget with little net progress. We propose COVER (Cache Override Verification for Efficient Revision), which performs leave-one-out verification and stable drafting within a single forward pass. COVER constructs two attention views via KV cache override: selected seeds are masked for verification, while their cached key value states are injected for all other queries to preserve contextual information, with a closed form diagonal correction preventing self leakage at the seed positions. COVER further prioritises seeds using a stability aware score that balances uncertainty, downstream influence, and cache drift, and it adapts the number of verified seeds per step. Across benchmarks, COVER markedly reduces unnecessary revisions and yields faster decoding while preserving output quality.

Scaling the size of language models to tens of billions of parameters has led to impressive performance on a wide range of tasks. At generation, these models are used auto-regressively, requiring a forward pass for each generated token, and thus reading the full set of parameters from memory. This memory access forms the primary bottleneck for generation and it worsens as the model size increases. Moreover, executing a forward pass for multiple tokens in parallel often takes nearly the same time as it does for just one token. These two observations lead to the development of speculative sampling, where a second smaller model is used to draft a few tokens, that are then validated or rejected using a single forward pass of the large model. Unfortunately, this method requires two models that share the same tokenizer and thus limits its adoption. As an alternative, we propose to use parallel decoding as a way to draft multiple tokens from a single model with no computational cost, nor the need for a second model. Our approach only requires an additional input token that marks the words that will be generated simultaneously. We show promising performance (up to 30% speed-up) while requiring only as few as O(d_{emb}) additional parameters.

Speculative decoding accelerates LLM inference by using a draft model to look ahead, but gains are capped by the cost of autoregressive draft generation: increasing draft size elevates acceptance rates but introduces additional latency overhead exacerbating the speed-accuracy tradeoff. Prior methods (Medusa, Hydra, EAGLE) partially reduce draft cost but either degrade acceptance or introduce overheads that limit scaling. We present Mirror Speculative Decoding (Mirror-SD), an inference algorithm that breaks the latency-acceptance tradeoff. Mirror-SD launches branch-complete rollouts from early-exit signals in parallel with the target model's suffix and explicitly maps computation across heterogeneous accelerators (GPU and NPU) to exploit cross-device parallelism. The draft speculates forward continuations for the target to verify, while the target simultaneously speculates correction paths for the draft, converting speculation into two complementary execution pipelines. To further cut draft latency without weakening acceptance semantics, we add speculative streaming so the draft emits multiple tokens per step. This dual strategy of parallel heterogeneous execution plus multi-token speculative streaming pushes speculative decoding toward its ideal regime of high acceptance with low overhead. On SpecBench with server-scale models from 14B to 66B parameters, Mirror-SD delivers consistent end-to-end gains, achieving 2.8x-5.8x wall-time speedups across diverse tasks and a 30% average relative improvement over the strongest baseline, EAGLE3.

Large language models have shown impressive capabilities across a variety of NLP tasks, yet their generating text autoregressively is time-consuming. One way to speed them up is speculative decoding, which generates candidate segments (a sequence of tokens) from a fast draft model that is then verified in parallel by the target model. However, the acceptance rate of candidate tokens receives limitations from several factors, such as the model, the dataset, and the decoding setup. This paper proposes sampling multiple candidates from a draft model and then organising them in batches for verification. We design algorithms for efficient multi-candidate verification while maintaining the distribution of the target model. Our approach shows significant improvements in acceptance rates on multiple datasets and models, consistently outperforming standard speculative decoding.

Speculative decoding has emerged as a widely adopted method to accelerate large language model inference without sacrificing the quality of the model outputs. While this technique has facilitated notable speed improvements by enabling parallel sequence verification, its efficiency remains inherently limited by the reliance on incremental token generation in existing draft models. To overcome this limitation, this paper proposes an adaptation of speculative decoding which uses discrete diffusion models to generate draft sequences. This allows parallelization of both the drafting and verification steps, providing significant speed-ups to the inference process. Our proposed approach, Speculative Diffusion Decoding (SpecDiff), is validated on standard language generation benchmarks and empirically demonstrated to provide a up to 8.7x speed-up over standard generation processes and up to 2.5x speed-up over existing speculative decoding approaches.

Recent works have revealed the great potential of speculative decoding in accelerating the autoregressive generation process of large language models. The success of these methods relies on the alignment between draft candidates and the sampled outputs of the target model. Existing methods mainly achieve draft-target alignment with training-based methods, e.g., EAGLE, Medusa, involving considerable training costs. In this paper, we present a training-free alignment-augmented speculative decoding algorithm. We propose alignment sampling, which leverages output distribution obtained in the prefilling phase to provide more aligned draft candidates. To further benefit from high-quality but non-aligned draft candidates, we also introduce a simple yet effective flexible verification strategy. Through an adaptive probability threshold, our approach can improve generation accuracy while further improving inference efficiency. Experiments on 8 datasets (including question answering, summarization and code completion tasks) show that our approach increases the average generation score by 3.3 points for the LLaMA3 model. Our method achieves a mean acceptance length up to 2.39 and speed up generation by 2.23.

Speculative reasoning has recently been proposed as a means to accelerate reasoning-intensive generation in large multimodal models, but its effectiveness is often constrained by misalignment between speculative drafts and target-verified reasoning. In this work, we introduce DREAM-R, a framework that substantially improves the performance of speculative reasoning. At its core, DREAM-R employs Speculative Alignment Policy Optimization (SAPO), a reinforcement-learning objective that trains draft models to generate reasoning steps that are both faithful to target trajectories and concise. We further propose a Threshold-based Verification Mechanism (TBVM) that uses a ratio-based criterion to provide stable and interpretable acceptance of speculative steps only when positive evidence clearly dominates, thereby preventing error propagation. Building on these components, we develop a Fully Parallel Speculative Reasoning (FPSR) framework that parallelizes draft generation, target-side reasoning, and verification across multi-step reasoning, enabling early stopping and clean fallback. Experiments on reasoning-heavy benchmarks demonstrate up to speedup while preserving target-model accuracy, yielding substantial efficiency gains without compromising reasoning quality.

Multi-path speculative decoding accelerates lossless sampling from a target model by using a cheaper draft model to generate a draft tree of tokens, and then applies a verification algorithm that accepts a subset of these. While prior work has proposed various verification algorithms for i.i.d rollouts, their relative performance under matched settings remains unclear. In this work, we firstly present a systematic evaluation of verification strategies across model families, tasks, and sampling regimes, and find that Traversal Verification dominates consistently, with OT-based methods lagging far behind. Our analysis uncovers that this occurs because OT-based methods achieve high multi-token acceptance near the root of the draft tree, while multi-token gains are most impactful deeper in the draft tree, where draft and target distributions diverge. Based on this insight, we propose delayed tree expansion, which drafts a partial single path, delaying the i.i.d. branching point. We show that delayed tree expansion preserves the target distribution and improves on root-node i.i.d rollouts. Further, we develop a dynamic neural selector that estimates the expected block efficiency of optimal-transport-based verification methods from draft and target features, enabling context-dependent expansion decisions. Our neural selector allows OT-based methods like SpecInfer to outperform Traversal Verification for the first time, achieving 5% higher average throughput across a wide range of models, datasets, and sampling settings.

Speculative decoding accelerates autoregressive LLMs by having a lightweight drafter propose tokens that the target model verifies in parallel. Diffusion-based drafters further reduce drafting latency by proposing multiple tokens at once. However, these tokens are predicted independently, so a single early error causes prefix verification to discard the rest of the draft, even when it contains useful downstream predictions. We introduce DEdit, a diffusion-based drafter that can not only draft by conventional parallel unmasking but also iteratively edit its draft through token-to-token predictions. Through editing, later predictions can serve as bidirectional context for repairing earlier errors and extending the accepted prefix. To teach the model to repair errors while preserving correct predictions, we propose ProposalMix, a training scheme that mixes draft predictions with ground-truth tokens based on first-pass confidence during training. Across seven benchmarks on Qwen3-4B and Qwen3-8B, DEdit achieves the highest macro-average token acceptance and speedup among the evaluated drafters, reaching macro-average speedups of 5.72times and 5.97times over autoregressive generation under greedy decoding, respectively. Further analysis shows that acceptance improves with more editing passes and wider drafting windows, and that ProposalMix halves harmful edits that shorten the accepted prefix. Moreover, restricting the editor to causal attention lowers acceptance, especially on highly predictable outputs, indicating that future context is a key source of these gains.

Autoregressive language models demonstrate excellent performance in various scenarios. However, the inference efficiency is limited by its one-step-one-word generation mode, which has become a pressing problem recently as the models become increasingly larger. Speculative decoding employs a "draft and then verify" mechanism to allow multiple tokens to be generated in one step, realizing lossless acceleration. Existing methods mainly adopt fixed heuristic draft structures, which fail to adapt to different situations to maximize the acceptance length during verification. To alleviate this dilemma, we proposed OPT-Tree, an algorithm to construct adaptive and scalable draft trees. It searches the optimal tree structure that maximizes the mathematical expectation of the acceptance length in each decoding step. Experimental results reveal that OPT-Tree outperforms the existing draft structures and achieves a speed-up ratio of up to 3.2 compared with autoregressive decoding. If the draft model is powerful enough and the node budget is sufficient, it can generate more than ten tokens in a single step. Our code is available at https://github.com/Jikai0Wang/OPT-Tree.

Speculative inference is a promising paradigm employing small speculative models (SSMs) as drafters to generate draft tokens, which are subsequently verified in parallel by the target large language model (LLM). This approach enhances the efficiency of inference serving by reducing LLM inference latency and costs while preserving generation quality. However, existing speculative methods face critical challenges, including inefficient resource utilization and limited draft acceptance, which constrain their scalability and overall effectiveness. To overcome these obstacles, we present CoSine, a novel speculative inference system that decouples sequential speculative decoding from parallel verification, enabling efficient collaboration among multiple nodes. Specifically, CoSine routes inference requests to specialized drafters based on their expertise and incorporates a confidence-based token fusion mechanism to synthesize outputs from cooperating drafters, ensuring high-quality draft generation. Additionally, CoSine dynamically orchestrates the execution of speculative decoding and verification in a pipelined manner, employing batch scheduling to selectively group requests and adaptive speculation control to minimize idle periods. By optimizing parallel workflows through heterogeneous node collaboration, CoSine balances draft generation and verification throughput in real-time, thereby maximizing resource utilization. Experimental results demonstrate that CoSine achieves superior performance compared to state-of-the-art speculative approaches. Notably, with equivalent resource costs, CoSine achieves up to a 23.2% decrease in latency and a 32.5% increase in throughput compared to baseline methods.

The immense model sizes of large language models (LLMs) challenge deployment on memory-limited consumer GPUs. Although model compression and parameter offloading are common strategies to address memory limitations, compression can degrade quality, and offloading maintains quality but suffers from slow inference. Speculative decoding presents a promising avenue to accelerate parameter offloading, utilizing a fast draft model to propose multiple draft tokens, which are then verified by the target LLM in parallel with a single forward pass. This method reduces the time-consuming data transfers in forward passes that involve offloaded weight transfers. Existing methods often rely on pretrained weights of the same family, but require additional training to align with custom-trained models. Moreover, approaches that involve draft model training usually yield only modest speedups. This limitation arises from insufficient alignment with the target model, preventing higher token acceptance lengths. To address these challenges and achieve greater speedups, we propose SubSpec, a plug-and-play method to accelerate parameter offloading that is lossless and training-free. SubSpec constructs a highly aligned draft model by generating low-bit quantized substitute layers from offloaded target LLM portions. Additionally, our method shares the remaining GPU-resident layers and the KV-Cache, further reducing memory overhead and enhance alignment. SubSpec achieves a high average acceptance length, delivering 9.1x speedup for Qwen2.5 7B on MT-Bench (8GB VRAM limit) and an average of 12.5x speedup for Qwen2.5 32B on popular generation benchmarks (24GB VRAM limit).

Speculative decoding, in which a lightweight draft model first generates a draft sequence that is then verified in parallel by the target model, has become a prevalent paradigm for accelerating large language model inference. Recent work such as DFlash further boosts drafting efficiency by leveraging diffusion drafters, whose parallel denoising mechanism enables draft generation in a single forward pass. In this work, we uncover a central pitfall of diffusion drafters: bidirectional attention is a double-edged sword. On one hand, it endows the model with parallel generation and global contextual modeling capabilities; on the other hand, this inherent global dependency introduces high variance at both the domain-level and the token-level: acceptance rates fluctuate substantially across different domains, and draft token quality also varies heterogeneously at different token positions. To tackle this issue, we propose AdaFlash framework, comprising two components: (i) an on-policy distillation (OPD) algorithm with reverse-KL divergence tailored for diffusion drafters, bringing stable convergence and effectively reducing domain-level variance; and (ii) an adaptive length head that dynamically adjusts the candidate sequence length on the fly, substantially lowering the verification cost of the target model and handling token-level variance. Experiments demonstrate that AdaFlash consistently improves speedup rate during deployment, with especially significant gains in high-concurrency scenarios, achieving up to approximately 66% higher throughput than previous state-of-the-art methods.

Speculative Decoding (SD) is a widely used approach to accelerate the inference of large language models (LLMs) without reducing generation quality. It operates by first using a compact model to draft multiple tokens efficiently, followed by parallel verification using the target LLM. This approach leads to faster inference compared to auto-regressive decoding. While there are multiple approaches to create a draft model, one promising approach is to use early-exit methods. These methods draft candidate tokens by using a subset of layers of the primary model and applying the remaining layers for verification, allowing a single model to handle both drafting and verification. While this technique reduces memory usage and computational cost, its performance relies on the choice of the exit layer for drafting and the number of tokens drafted (speculation length) in each SD round. Prior works use hyperparameter exploration to statically select these values. However, our evaluations show that these hyperparameter values are task-specific, and even within a task they are dependent on the current sequence context. We introduce DEL, a plug-and-play method that adaptively selects the exit layer and speculation length during inference. DEL dynamically tracks the token acceptance rate if the tokens are drafted at each layer of an LLM and uses that knowledge to heuristically select the optimal exit layer and speculation length. Our experiments across a broad range of models and downstream tasks show that DEL achieves overall speedups of 2.16timessim2.50times over vanilla auto-regressive decoding and improves upon the state-of-the-art SD methods by up to 0.27times.

Speculative decoding has become the standard approach for accelerating Large Language Model (LLM) inference. It exploits a lossless draft-then-verify procedure to circumvent the latency of autoregressive decoding, achieving impressive speed-ups. Yet, current speculative decoding approaches remain limited by two fundamental bottlenecks: (1) the autoregressive dependency during drafting which limits parallelism, and (2) frequent rejections of draft tokens caused by misalignment between the draft and verify models. This paper proposes SpecDiff-2, a novel framework to jointly address these two bottlenecks. It leverages discrete diffusion as a non-autoregressive drafter to address bottleneck (1) and develops novel techniques to calibrate discrete diffusion drafters with autoregressive verifiers, addressing bottleneck (2). Experimental results across a comprehensive benchmark suite show that SpecDiff-2 achieves a new state-of-the-art across reasoning, coding, and mathematical benchmarks, improving tokens-per-second by up to an average of +55% over previous baselines and obtaining up to 5.5x average speed-up over standard decoding, without any loss of accuracy.

We present a novel inference scheme, self-speculative decoding, for accelerating Large Language Models (LLMs) without the need for an auxiliary model. This approach is characterized by a two-stage process: drafting and verification. The drafting stage generates draft tokens at a slightly lower quality but more quickly, which is achieved by selectively skipping certain intermediate layers during drafting Subsequently, the verification stage employs the original LLM to validate those draft output tokens in one forward pass. This process ensures the final output remains identical to that produced by the unaltered LLM, thereby maintaining output quality. The proposed method requires no additional neural network training and no extra memory footprint, making it a plug-and-play and cost-effective solution for inference acceleration. Benchmarks with LLaMA-2 and its fine-tuned models demonstrated a speedup up to 1.73times.

Due to the high resource demands of Large Language Models (LLMs), achieving widespread deployment on consumer-grade devices presents significant challenges. Typically, personal or consumer-grade devices, including servers configured prior to the era of large-scale models, generally have relatively weak GPUs and relatively strong CPUs. However, most current methods primarily depend on GPUs for computation. Therefore, we propose Dovetail, an approach that deploys the draft model on the GPU to generate draft tokens while allowing the target model to perform parallel verification on the CPU, thereby improving the utilization of all available hardware resources and occupying less inter-device communication bandwidth. Accordingly, we have redesigned the draft model to better align with heterogeneous hardware characteristics. To this end, we implemented several optimizations: reducing the number of draft tokens to mitigate latency in parallel verification, increasing the depth of the draft model to enhance its predictive capacity, and introducing DGF (Dynamic Gating Fusion) to improve the integration of features and token embeddings. In the HumanEval benchmark, Dovetail achieved an inference speed of 5.86 tokens per second for LLaMA2-Chat-7B using 3GB of VRAM, representing an approximately 2.77x improvement over CPU-only inference. Furthermore, the inference speed was increased to 8 tokens per second when utilizing 7GB of VRAM.

As large language models (LLMs) scale up, accuracy improves, but the autoregressive (AR) nature of decoding increases latency since each token requires a serial forward pass. Speculative decoding addresses this by employing a fast drafter to propose multi-token drafts, which are then verified in parallel by the target model. However, many deployments still rely on AR drafters, where sequential passes limit wall-clock gains. We revisit the drafting stage and present DiffuSpec, a training-free drop-in framework that uses a pretrained diffusion language model (DLM) to produce multi-token drafts in a single forward pass, while remaining compatible with standard AR verifiers. Because DLM drafts are generated under bidirectional conditioning, parallel per-position candidates form a token lattice in which the locally highest-probability token at each position need not form a causal left-to-right path. Moreover, DLM drafting requires pre-specifying a draft length, inducing a speed-quality trade-off. To address these challenges, we introduce two practical components: (i) a causal-consistency path search (CPS) over this lattice that extracts a left-to-right path aligned with AR verification; and (ii) an adaptive draft-length (ADL) controller that adjusts next proposal size based on recent acceptance feedback and realized generated length. Across benchmarks, DiffuSpec yields up to 3x wall-clock speedup, establishing diffusion-based drafting as a robust alternative to autoregressive drafters for speculative decoding.

Speculative decoding (SD) is a powerful technique for accelerating the inference process of large language models (LLMs) without sacrificing accuracy. Typically, SD employs a small draft model to generate a fixed number of draft tokens, which are then verified in parallel by the target model. However, our experiments reveal that the optimal draft length varies significantly across different decoding steps. This variation suggests that using a fixed draft length limits the potential for further improvements in decoding speed. To address this challenge, we propose Pacer, a novel approach that dynamically controls draft length using a lightweight, trainable pre-verification layer. This layer pre-verifies draft tokens blockwise before they are sent to the target model, allowing the draft model to stop token generation if the blockwise pre-verification fails. We implement Pacer on multiple SD model pairs and evaluate its performance across various benchmarks. Our results demonstrate that Pacer achieves up to 2.66x Speedup over autoregressive decoding and consistently outperforms standard speculative decoding. Furthermore, when integrated with Ouroboros, Pacer attains up to 3.09x Speedup.

Inference-time scaling for text-to-image generation has progressed from simple Best-of-N (BoN) sampling to guided search methods that verify and steer candidate trajectories at intermediate denoising steps. These approaches focus on when and how often to verify during denoising but largely treat the cost of generation itself as fixed. Moreover, the standard practice of comparing methods by number of function evaluations (NFEs) counts only denoising forward passes and ignores verifier overhead, which can distort efficiency rankings. We show that under wall-clock evaluation, simple BoN already matches or outperforms several guided search techniques, suggesting that compute is better spent on broader exploration than on repeated intermediate verification. This motivates Flash-BoN, which generates a large pool of inexpensive draft candidates by combining three complementary acceleration knobs: timestep truncation, layer skipping, and activation proxies into a single configuration optimized once per model. An efficient multi-stage verification procedure then identifies the most promising draft, which is refined at full quality. Across three benchmarks and three model scales, Flash-BoN consistently outperforms all baselines under fixed wall-clock budgets, with gains that grow at larger model scales (+8% AUC). We further show that our strategy combines well and improves existing orthogonal techniques such as reflection-based prompt optimization (+16% AUC). The gains correlate with increased candidate diversity, which also enables draft-guided selection to accelerate RL post-training convergence.

Speculative Decoding has gained popularity as an effective technique for accelerating the auto-regressive inference process of Large Language Models (LLMs). However, Speculative Decoding entirely relies on the availability of efficient draft models, which are often lacking for many existing language models due to a stringent constraint of vocabulary incompatibility. In this work we introduce FastDraft, a novel and efficient approach for pre-training and aligning a draft model to any large language model by incorporating efficient pre-training, followed by fine-tuning over synthetic datasets generated by the target model. We demonstrate FastDraft by training two highly parameter efficient drafts for the popular Phi-3-mini and Llama-3.1-8B models. Using FastDraft, we were able to produce a draft with approximately 10 billion tokens on a single server with 8 Intel^circledR Gaudi^circledR 2 accelerators in under 24 hours. Our results show that the draft model achieves impressive results in key metrics of acceptance rate, block efficiency and up to 3x memory bound speed up when evaluated on code completion and up to 2x in summarization, text completion and instruction tasks. We validate our theoretical findings through benchmarking on the latest Intel^circledR Core^{tiny TM} Ultra, achieving a wall-clock time speedup of up to 2x, indicating a significant reduction in runtime. Due to its high quality, FastDraft unlocks large language models inference on AI-PC and other edge-devices.

Speculative decoding accelerates Large Language Models (LLMs) inference by using a lightweight draft model to propose candidate tokens that are verified in parallel by the target model. However, existing draft model training objectives are not directly aligned with the inference-time goal of maximizing consecutive token acceptance. To address this issue, we reformulate the draft model optimization objective, shifting the focus from token prediction accuracy to the overall acceptance length. In this paper, we build upon PARD to propose PARD-2, a dual-mode speculative decoding framework with Confidence-Adaptive Token (CAT) optimization. This approach adaptively reweights each token to better align with the verification process. Notably, PARD-2 enables a single draft model to support both target-dependent and target-independent modes. Experiments across diverse models and tasks demonstrate that PARD-2 achieves up to 6.94times lossless acceleration, surpassing EAGLE-3 by 1.9times and PARD by 1.3times on Llama3.1-8B. Our code is available at https://github.com/AMD-AGI/PARD.

Speculative decoding accelerates large language model inference by pairing a target model with a lightweight draft model whose proposed tokens are verified in parallel. A common way to build draft models, like EAGLE3 or DFlash is supervised fine-tuning (SFT) on target-generated trajectories. However, we observe that SFT quickly plateaus: the draft model's acceptance length on test data stops improving. The reason is an offline-to-inference mismatch: In SFT, the drafter learns from fixed target-generated trajectories, whereas during speculative decoding it is evaluated on blocks proposed under its own policy. This motivates on-policy distillation (OPD), where the target model supervises the drafter on draft-induced states. Yet OPD remains difficult for draft models, as they cannot reliably roll out complete sequences independently, whereas target-assisted generation makes the collected sequences follow the target distribution and thus eliminates the on-policy signal. We therefore propose Draft-OPD, which uses target-assisted rollout for stable continuations and replays drafting from the verification-exposed error positions. This allows the drafter to learn from target feedback on both accepted and rejected proposals, focusing training on the draft-induced errors that limit speculative acceptance. Experiments show that Draft-OPD achieves over 5times lossless acceleration for thinking models across diverse tasks, improving over EAGLE-3 and DFlash by 23\% and 13\%.

Speculative Decoding (SD) accelerates autoregressive large language model (LLM) inference by decoupling generation and verification. While recent methods improve draft quality by tightly coupling the drafter with the target model, the verification mechanism itself remains largely unchanged, relying on strict token-level rejection sampling. In practice, modern LLMs frequently operate in low-margin regimes where the target model exhibits weak preference among top candidates. In such cases, rejecting plausible runner-up tokens yields negligible information gain while incurring substantial rollback cost, leading to a fundamental inefficiency in verification. We propose Margin-Aware Speculative Verification, a training-free and domain-agnostic verification strategy that adapts to the target model's local decisiveness. Our method conditions verification on decision stability measured directly from the target logits and relaxes rejection only when strict verification provides minimal benefit. Importantly, the approach modifies only the verification rule and is fully compatible with existing target-coupled speculative decoding frameworks. Extensive experiments across model scales ranging from 8B to 235B demonstrate that our method delivers consistent and significant inference speedups over state-of-the-art baselines while preserving generation quality across diverse benchmarks.

Large Language Models (LLMs) have achieved remarkable success in natural language understanding and generation, but their deployment is constrained by high computational demands. Deploying smaller LLMs directly on the edge can circumvent this, but with degraded accuracy. Deploying smaller cloud-based big LLMs preserves performance, but at the cost of expensive per-token computation. We present a distributed inference framework, , that integrates speculative decoding (SD) across edge and cloud. A compact draft model deployed on the edge generates candidate tokens rapidly, and a large verifier model on the cloud validates these tokens in parallel. Accepted tokens are retained, while only rejections trigger verifier correction, substantially reducing the number of cloud queries. Our plug-and-play design shifts the bulk of computation to the edge, significantly lowers inference time and cloud cost, and preserves the accuracy of the big model without any retraining requirement. Our approach demonstrates a practical path toward scalable, cost-efficient, and accurate deployment of LLMs in real-world environments. Experimental results across multiple Natural Language Processing tasks using SpecBench and CNN/Dailymail datasets demonstrate that reduces the cloud model calls by 76% with zero loss in accuracy as compared to the full model.

Efficiency, as a critical practical challenge for LLM-driven agentic and reasoning systems, is increasingly constrained by the inherent latency of autoregressive (AR) decoding. Speculative decoding mitigates this cost through a draft-verify scheme, yet existing approaches rely on AR draft models (a.k.a., drafters), which introduce two fundamental issues: (1) step-wise uncertainty accumulation leads to a progressive collapse of trust between the target model and the drafter, and (2) inherently sequential decoding of AR drafters. Together, these factors cause limited speedups. In this paper, we show that a diffusion large language model (dLLM) drafters can naturally overcome these issues through its fundamentally different probabilistic modeling and efficient parallel decoding strategy. Building on this insight, we introduce DEER, an efficient speculative decoding framework that drafts with diffusion and verifies with AR models. To enable high-quality drafting, DEER employs a two-stage training pipeline to align the dLLM-based drafters with the target AR model, and further adopts single-step decoding to generate long draft segments. Experiments show DEER reaches draft acceptance lengths of up to 32 tokens, far surpassing the 10 tokens achieved by EAGLE-3. Moreover, on HumanEval with Qwen3-30B-A3B, DEER attains a 5.54x speedup, while EAGLE-3 achieves only 2.41x. Code, model, demo, etc, will be available at https://czc726.github.io/DEER/

Speculative decoding is a powerful technique that accelerates Large Language Model (LLM) inference by leveraging a lightweight speculative draft model. However, existing designs suffers in performance due to misalignment between training and inference. Recent methods have tried to solve this issue by adopting a multi-step training strategy, but the complex inputs of different training steps make it harder for the draft model to converge. To address this, we propose CORAL, a novel framework that improves both accuracy and efficiency in speculative drafting. CORAL introduces Cross-Step Representation Alignment, a method that enhances consistency across multiple training steps, significantly improving speculative drafting performance. Additionally, we identify the LM head as a major bottleneck in the inference speed of the draft model. We introduce a weight-grouping mechanism that selectively activates a subset of LM head parameters during inference, substantially reducing the latency of the draft model. We evaluate CORAL on three LLM families and three benchmark datasets, achieving speedup ratios of 2.50x-4.07x, outperforming state-of-the-art methods such as EAGLE-2 and HASS. Our results demonstrate that CORAL effectively mitigates training-inference misalignment and delivers significant speedup for modern LLMs with large vocabularies.

The goal of L-step speculative decoding is to accelerate autoregressive decoding of a target model by using a cheaper draft model to generate a candidate path of L tokens. Based on a verification algorithm involving target and draft model probabilities, a prefix of the candidate sequence is accepted, and an additional correction token is sampled from a residual distribution to ensure that the final output adheres to the target distribution. While standard speculative decoding uses a verification algorithm which is independent at each token on the path, a recent extension called block verification uses a joint condition involving all sampled on-path probabilities. Block verification (BV) was shown to be optimal over all verification algorithms which use only on-path probabilities, improving on standard speculative decoding. In this work, we first show that block verification is optimal even over verification algorithms that use off-path probabilities, by constructing an information-agnostic linear program (LP). Further, we can extend our LP to the setting where the draft model samples multiple candidate paths, and use it to construct a natural class of multi-path block verification generalizations. While computing the optimal algorithm in this class is not tractable, by considering a stricter class of greedy algorithms, we can formulate an efficient method called greedy multi-path block verification (GBV). Empirically, GBV can improve block efficiency by over 30% and reduce decoding walltimes by over 15% relative to BV. On Llama-3 70B, GBV can improve the end-to-end decoding throughput over SOTA multi-path verification methods by more than 15%.

Growing demands from tasks like code generation, deep reasoning, and long-document understanding have made long-context generation a crucial capability for large language models (LLMs). Speculative decoding is one of the most direct and effective approaches for accelerating generation. It follows a draft-verify paradigm, where a lightweight draft model proposes several candidate tokens and the target model verifies them. However, we find that as the context length grows, verification becomes the dominant bottleneck. To further accelerate speculative decoding in long-context generation, we introduce SpecPV, a self-speculative decoding approach that performs fast verification using partial key-value states (KV) and periodically applies full verification to eliminate accumulated errors. We validate SpecPV across multiple long-context benchmarks and models, including LLaMA-3.1-8B-Instruct and Qwen3-series. Experimental results show that SpecPV achieves up to 6x decoding speedup over standard autoregressive decoding with minor degradation.

Large Language Models (LLMs) have become an indispensable part of natural language processing tasks. However, autoregressive sampling has become an efficiency bottleneck. Multi-Draft Speculative Decoding (MDSD) is a recent approach where, when generating each token, a small draft model generates multiple drafts, and the target LLM verifies them in parallel, ensuring that the final output conforms to the target model distribution. The two main design choices in MDSD are the draft sampling method and the verification algorithm. For a fixed draft sampling method, the optimal acceptance rate is a solution to an optimal transport problem, but the complexity of this problem makes it difficult to solve for the optimal acceptance rate and measure the gap between existing verification algorithms and the theoretical upper bound. This paper discusses the dual of the optimal transport problem, providing a way to efficiently compute the optimal acceptance rate. For the first time, we measure the theoretical upper bound of MDSD efficiency for vocabulary sizes in the thousands and quantify the gap between existing verification algorithms and this bound. We also compare different draft sampling methods based on their optimal acceptance rates. Our results show that the draft sampling method strongly influences the optimal acceptance rate, with sampling without replacement outperforming sampling with replacement. Additionally, existing verification algorithms do not reach the theoretical upper bound for both without replacement and with replacement sampling. Our findings suggest that carefully designed draft sampling methods can potentially improve the optimal acceptance rate and enable the development of verification algorithms that closely match the theoretical upper bound.

Looped language models repeatedly apply a weight-shared block to increase effective depth without increasing parameter count, but the resulting T sequential recurrent-block calls per generated token substantially increase decoding latency. To address the issue, we introduce Wavefront Decoding (WFD), a training-free self-speculative decoding framework designed for looped language models. WFD exploits two properties of these architectures: intermediate recurrence outputs provide effective draft predictions, and weight sharing allows token states at different positions and recurrence depths to be processed in one batched recurrent-block call. WFD organizes these mixed-depth states into a diagonal wavefront, continuously drafting new positions at shallow depth while advancing earlier positions toward full-depth verification. Unlike the phase-separated draft-then-verify schedule, WFD therefore concurrently batches drafting and verification within the same recurrent calls, while rejected drafts are corrected using full-depth predictions. Across six Spec-Bench task categories, WFD achieves 2.42x speedup on Ouro-2.6B and 3.54x on Huginn-3.5B over autoregressive decoding, consistently outperforming draft-then-verify. Cross-recurrence KV sharing further reduces wavefront KV traffic and increases WFD's speedup to 4.81x on Huginn-3.5B. The code is available at https://github.com/summerbro-hhj/wavefront-decoding.

We propose an acceleration scheme for large language models (LLMs) through Speculative Decoding with Semantic Adaptive Tokens (SDSAT). The primary objective of this design is to enhance the LLM model's ability to generate draft tokens more accurately without compromising the model's accuracy. The core strategies involve: 1) Fine-tune the model by incorporating semantic adaptive tokens that possess flexible decoding capabilities without changing its structure, allowing them to generate high-quality draft tokens. 2) By employing a training method that does not affect the standard tokens, the model can acquire parallel decoding abilities atop its original framework with minimal training overhead. 3) We have designed the "two-step-draft-then-verify" generation strategies using both greedy search and nucleus sampling. Experiments conducted on the CodeLlama-13B and 7B models have yielded speed increases of over 3.5X and 3.0X, respectively. Please refer to https://github.com/hasuoshenyun/SDSAT.

Verified proof edits offer a natural source of supervision for improving language-model-generated Lean proofs. Yet verification establishes that an edit is correct, not that its training signal is free of search artifacts. We introduce LeanPolish, a symbolic Lean 4 pipeline that releases 33,402 accepted local edits and 65,596 same-state failed attempts, and use it to study what models learn from this supervision. First-success search admits a goal-independent rule with perfect ranking accuracy; teacher-selected evaluation sites also reward trivial deletions. Continuing menu evaluation beyond the first success removes the ordering shortcut: a trained ranker selects the best candidate on 70.1% of evaluated held-out states, versus 36.9% for the strongest frozen baseline. For compression, iterating the symbolic pass raises miniF2F savings from 19.7% to 27.5%, exceeding the neural hybrids we test there. Verified neural editing helps on other proof sources, but matched frozen-model controls show that its gains need not come from training. The supervision does improve whole-proof rewriting: fine-tuning raises verified token reduction from 2.8% to 5.5% on 19 PutnamBench proofs. Together, the released edits, complete candidate pools, and controlled evaluations separate learning to imitate a search policy from improving on that search. They provide a reproducible basis for studying proof improvement while keeping correctness, compression, and edit policy distinct.

In this paper, we introduce a simple training-free technique to improve the performance of drafter-based speculative decoding (SpD) methods that incorporates language modeling head (LM head) during drafting process. A drafter-based speculative decoding leverages one or more smaller language models, a.k.a. drafters or draft models, to sample a draft sequence or tree consisting of multiple tokens, followed by verification by a base LLM, a target model, accepting a subset as its valid generation. As it is usually considered that the speculative decoding requires one-to-one mapping between vocabularies of the target model and the draft model, it has been natural to share the vocabulary between them, or even share the LM head as in EAGLE or Medusa. We first identify that this draft token sampling scheme inherently contains an unnecessary inference overhead in drafting, especially for some target LLMs with very large vocabularies. Then, we propose a simple technique, VocabTrim, to mitigate the drafting overhead to improve the generation speed in memory-bound environment. VocabTrim reconstructs the drafter LM head to contain only a limited set of tokens, selected by the most frequently sampled from the vocabulary of the target model. While limiting the vocabulary in drafting slightly degrades the acceptance rate, it significantly reduces the drafting latency in memory-bound process which is often the case on edge devices, resulting in higher memory-bound speed up (MBSU). We show that our method can boost the memory-bound speed-up for Llama-3 models on Spec-Bench, specifically by 16% for Llama-3.2-3B-Instruct.

Training language models for formal theorem proving requires large numbers of verifier calls. Slow checks and timeouts often leave GPUs waiting and withhold rewards from potentially correct proofs. We train neural evaluators to predict Lean 4 verdicts and compiler feedback on GPUs using 4.84M labelled programs. We compare two validity classifiers with a feedback model that annotates proof attempts with predicted goal states and error messages. A two-stage evaluator that screens candidates with a classifier and scores its positive predictions with the feedback model reaches 87.8% accuracy in predicting whether Lean accepts a candidate proof, evaluated on a 68,932-program benchmark collected from public provers. The combined evaluator processes 3.5 candidates per second on one H100, 4.2x the throughput of our 64-worker Lean baseline with environment reuse. Finally, we combine our evaluator with Lean verdicts to obtain a hybrid reward system that shortens GRPO training steps by approximately 31%. After one GRPO epoch with hybrid rewards, the prover achieves nearly the same miniF2F pass@1 as with Lean-only rewards (62.2% versus 62.4%) and a pass@32 of 72.4% versus 71.3%.

Large language models (LLMs) exhibit remarkable reasoning capabilities across diverse downstream tasks. However, their autoregressive nature leads to substantial inference latency, posing challenges for real-time applications. Speculative sampling mitigates this issue by introducing a drafting phase followed by a parallel validation phase, enabling faster token generation and verification. Existing approaches, however, overlook the inherent coherence in text generation, limiting their efficiency. To address this gap, we propose a Speculative Sampling with Syntactic and Semantic Coherence (S^4C) framework, which extends speculative sampling by leveraging multi-head drafting for rapid token generation and a continuous verification tree for efficient candidate validation and feature reuse. Experimental results demonstrate that S^4C surpasses baseline methods across mainstream tasks, offering enhanced efficiency, parallelism, and the ability to generate more valid tokens with fewer computational resources. On Spec-bench benchmarks, S^4C achieves an acceleration ratio of 2.26x-2.60x, outperforming state-of-the-art methods.

Speculative decoding accelerates LLM inference by drafting multiple tokens and verifying them in parallel with the target model. However, its practical speedup is constrained by the trade-off between draft quality and drafting cost: autoregressive drafters model causal dependencies among draft tokens but incur sequential overhead, while parallel drafters reduce drafting cost but weaken intra-block dependency modeling. In this paper, we propose Domino, a speculative decoding framework that decouples causal dependency modeling from expensive autoregressive draft execution. Domino first uses a parallel draft backbone to produce preliminary draft distributions for the entire block, and then applies a lightweight Domino head to refine them with prefix-dependent causal information. To stabilize teacher-forced causal encoding, we further introduce a base-anchored training curriculum that first strengthens the parallel backbone and then gradually shifts optimization toward the causally corrected final distribution. Experiments on Qwen3 models show that Domino achieves up to \(5.49\times\) end-to-end speedup under the Transformers backend and up to \(5.8\times\) throughput speedup under SGLang serving.

The performance of large language models (LLMs) is closely linked to their underlying size, leading to ever-growing networks and hence slower inference. Speculative decoding has been proposed as a technique to accelerate autoregressive generation, leveraging a fast draft model to propose candidate tokens, which are then verified in parallel based on their likelihood under the target model. While this approach guarantees to reproduce the target output, it incurs a substantial penalty: many high-quality draft tokens are rejected, even when they represent objectively valid continuations. Indeed, we show that even powerful draft models such as GPT-4o, as well as human text cannot achieve high acceptance rates under the standard verification scheme. This severely limits the speedup potential of current speculative decoding methods, as an early rejection becomes overwhelmingly likely when solely relying on alignment of draft and target. We thus ask the following question: Can we adapt verification to recognize correct, but non-aligned replies? To this end, we draw inspiration from the LLM-as-a-judge framework, which demonstrated that LLMs are able to rate answers in a versatile way. We carefully design a dataset to elicit the same capability in the target model by training a compact module on top of the embeddings to produce ``judgements" of the current continuation. We showcase our strategy on the Llama-3.1 family, where our 8b/405B-Judge achieves a speedup of 9x over Llama-405B, while maintaining its quality on a large range of benchmarks. These benefits remain present even in optimized inference frameworks, where our method reaches up to 141 tokens/s for 8B/70B-Judge and 129 tokens/s for 8B/405B on 2 and 8 H100s respectively.

Speculative decoding accelerates large language model inference without changing the target distribution, but no single drafting structure performs best across real-world workloads. Autoregressive multi-token prediction (MTP) is a lightweight, stable proposal mechanism, whereas block-parallel diffusion amortizes drafting latency over much longer candidate sequences; the better choice depends strongly on the output distribution. We present AngelSpec, a unified training framework for MTP and block-parallel speculative decoding that addresses this heterogeneity at three levels. At the training level, rather than fitting one universal drafter to a uniform data mixture, we co-specialize structure and data: the MTP drafter is trained on diverse conversational data for high-entropy open-ended chat, and the block-diffusion drafter on code and mathematics data for longer predictable continuations. At the architecture level, we propose DFly, a block-diffusion framework combining a hybrid target-conditioning backbone with a predecessor-conditioned autoregressive head, improving target-feature utilization and intra-block dependency modeling while keeping generation parallel. At the inference level, both acceptance length and verification cost vary with domain, request, online load, and hardware, so DFly treats verification as a shared batch-level resource: it reallocates compute toward high-confidence prefixes across requests and combines expected utility with a profiled cost model to adapt verification depth online. Across the Hy3 series, DFly raises the average accepted length on Hy3-A21B by roughly 30% and attains the highest average throughput at every tested concurrency from 4 to 64, a 1.98-2.40x speedup over autoregressive decoding and 10.5-11.8% higher throughput than DFlash. We release AngelSpec to support training and extending these methods.

Speculative decoding accelerates large language model inference by using a lightweight drafter to propose multiple tokens that are subsequently verified in parallel by the target model. Recent diffusion-based drafters make this paradigm particularly attractive: deep attention-based neural backbones provide strong predictions, while drafting multiple future positions in parallel avoids the sequential cost of autoregressive generation. This parallelism, however, comes at a cost. Tokens within a draft block are predicted without access to the realized identities of preceding draft tokens, removing intra-block dependencies that would naturally be available under autoregressive generation. We introduce DCOCO (DFlash Contextual Corrector), a lightweight mechanism that restores these dependencies while preserving parallel drafting. Rather than committing to each position's top prediction, DCOCO retains multiple candidate tokens and evaluates their contextual compatibility across adjacent draft positions in parallel, enabling contextually informed token selection at low additional cost. Across four verifier backbones and ten benchmarks, DCOCO achieves the highest average throughput in every evaluated configuration, spanning greedy and stochastic decoding with and without extended reasoning, with speedups of up to 6.6x over vanilla decoding. Its advantage persists under concurrent serving: DCOCO outperforms the strongest competing method by 6-23% across 4-32 concurrent requests, while other sequential correctors fall below uncorrected DFlash at these loads. These results demonstrate that recovering intra-block dependencies through parallel contextual scoring delivers consistent acceleration across decoding regimes and serving loads.

Block diffusion speculative decoding accelerates LLM inference by predicting all tokens within a block simultaneously for the target model to verify in parallel. Predicting an entire block at once requires a sufficiently capable draft model and effective utilization of the target model's internal knowledge. However, the state-of-the-art method DFlash constrains all draft layers to share a single fused representation derived from only a few target layers, limiting per-layer expressiveness and hindering further scaling of draft capacity. In this paper, we present \modelname, which flares out the narrow conditioning bottleneck of DFlash through a lightweight layer-wise fusion mechanism: each draft layer attends to its own learnable combination of a broad set of target layers at negligible overhead, simultaneously injecting richer target knowledge and providing every draft layer with a distinct input. This enhanced per-layer expressiveness enables scaling the draft model to deeper architectures with consistent gains. We further scale training data from 800K to 2.4M samples to fully exploit the enlarged capacity. On six benchmarks spanning mathematical reasoning, code generation, and conversation, \modelname attains average wall-clock speedups of 5.52x on Qwen3-4B, 5.46x on Qwen3-8B, and 3.91x on GPT-OSS-20B, improving over DFlash by roughly 11\%, 8\%, and 5\% respectively. Our code is available at https://github.com/Tencent/AngelSlim.

This technical report describes the design and training of novel speculative decoding draft models, for accelerating the inference speeds of large language models in a production environment. By conditioning draft predictions on both context vectors and sampled tokens, we can train our speculators to efficiently predict high-quality n-grams, which the base model then accepts or rejects. This allows us to effectively predict multiple tokens per inference forward pass, accelerating wall-clock inference speeds of highly optimized base model implementations by a factor of 2-3x. We explore these initial results and describe next steps for further improvements.

Large language models incur high inference latency due to sequential autoregressive decoding. Speculative decoding alleviates this bottleneck by using a lightweight draft model to propose multiple tokens for batched verification. However, its adoption has been limited by the lack of high-quality draft models and scalable training infrastructure. We introduce SpecForge, an open-source, production-oriented framework for training speculative decoding models with full support for EAGLE-3. SpecForge incorporates target-draft decoupling, hybrid parallelism, optimized training kernels, and integration with production-grade inference engines, enabling up to 9.9x faster EAGLE-3 training for Qwen3-235B-A22B. In addition, we release SpecBundle, a suite of production-grade EAGLE-3 draft models trained with SpecForge for mainstream open-source LLMs. Through a systematic study of speculative decoding training recipes, SpecBundle addresses the scarcity of high-quality drafts in the community, and our draft models achieve up to 4.48x end-to-end inference speedup on SGLang, establishing SpecForge as a practical foundation for real-world speculative decoding deployment.

Recent advancements, such as DeepSeek-Prover-V2-671B and Kimina-Prover-Preview-72B, demonstrate a prevailing trend in leveraging reinforcement learning (RL)-based large-scale training for automated theorem proving. Surprisingly, we discover that even without any training, careful neuro-symbolic coordination of existing off-the-shelf reasoning models and tactic step provers can achieve comparable performance. This paper introduces DSP+, an improved version of the Draft, Sketch, and Prove framework, featuring a fine-grained and integrated neuro-symbolic enhancement for each phase: (1) In the draft phase, we prompt reasoning models to generate concise natural-language subgoals to benefit the sketch phase, removing thinking tokens and references to human-written proofs; (2) In the sketch phase, subgoals are autoformalized with hypotheses to benefit the proving phase, and sketch lines containing syntactic errors are masked according to predefined rules; (3) In the proving phase, we tightly integrate symbolic search methods like Aesop with step provers to establish proofs for the sketch subgoals. Experimental results show that, without any additional model training or fine-tuning, DSP+ solves 80.7\%, 32.8\%, and 24 out of 644 problems from miniF2F, ProofNet, and PutnamBench, respectively, while requiring fewer budgets compared to state-of-the-arts. DSP+ proves imo\_2019\_p1, an IMO problem in miniF2F that is not solved by any prior work. Additionally, DSP+ generates proof patterns comprehensible by human experts, facilitating the identification of formalization errors; For example, eight wrongly formalized statements in miniF2F are discovered. Our results highlight the potential of classical reasoning patterns besides the RL-based training. All components will be open-sourced.

Speculative decoding is an effective and lossless approach for accelerating LLM inference. However, existing widely adopted model-based draft designs, such as EAGLE3, improve accuracy at the cost of multi-step autoregressive inference, resulting in high drafting latency and ultimately rendering the drafting stage itself a performance bottleneck. Inspired by diffusion-based large language models (dLLMs), we propose DART, which leverages parallel generation to reduce drafting latency. DART predicts logits for multiple future masked positions in parallel within a single forward pass based on hidden states of the target model, thereby eliminating autoregressive rollouts in the draft model while preserving a lightweight design. Based on these parallel logit predictions, we further introduce an efficient tree pruning algorithm that constructs high-quality draft token trees with N-gram-enforced semantic continuity. DART substantially reduces draft-stage overhead while preserving high draft accuracy, leading to significantly improved end-to-end decoding speed. Experimental results demonstrate that DART achieves a 2.03x--3.44x wall-clock time speedup across multiple datasets, surpassing EAGLE3 by 30% on average and offering a practical speculative decoding framework. Code is released at https://github.com/fvliang/DART.

Speculative decoding accelerates autoregressive inference by verifying multiple draft tokens in a single target forward pass. However, as the context grows, existing state-of-the-art drafters become increasingly expensive, eroding the very efficiency advantage they are designed to provide. We argue that this scaling is unnecessary. A standalone language model must grow with its prefix because it is solely responsible for every token it produces. A drafter, by contrast, only proposes candidates; the target catches and corrects every error before any token is committed. The drafter's decoding cost can therefore be made entirely independent of the prefix length. We introduce LongSpark, a block-diffusion drafter that achieves this by extracting fixed-size, multiscale views from the target's verification pass, thereby eliminating the need for a growing persistent state. Extensive evaluations demonstrate that LongSpark achieves state-of-the-art end-to-end efficiency across multiple model scales and realistic serving conditions. Notably, it delivers the lowest time-per-output-token on long-context tasks while reducing the drafter's context state by several orders of magnitude.

Large language model agents solve tasks through long sequences of tool calls, and the prevailing design has a single strong model generate every step, although many steps are routine enough for a much smaller model. Existing ways of sharing this work keep the strong model as the generator: routers and collaborative agents decide which model handles each query or step, and speculative methods check a small model's drafts one step at a time, usually against the strong model's own action. We introduce SpecAgent, a collaboration protocol that turns the strong model from the author of each step into a reviewer of steps drafted by a weak model. The weak model executes read-only tool calls as it drafts, so that every step is grounded in real observations, and holds the first action that would modify the environment. The strong model then verifies the drafted segment in a single prefill pass, commits the longest prefix it judges semantically valid, and repairs the first rejected step. Because verification replaces autoregressive decoding with parallel prefill, the strong model decodes only short verdicts and occasional repairs rather than every step. On τ^2-Bench, SpecAgent comes within one point of the strong model's success rate while roughly halving memory traffic and wall time, and on AutomationBench and VitaBench it recovers 44-75% of the quality gap while lowering both. In an edge-cloud deployment on MCP-Atlas with three cloud models, it closes 53-75% of the weak-strong quality gap while the strong model generates at most half as many tokens. These results suggest that a strong model need not author every step of an agent: reviewing grounded drafts retains most of its quality while cutting both latency and memory traffic.

Speculative decoding accelerates inference in large language models (LLMs) by generating draft tokens for target model verification. Current approaches for obtaining draft tokens rely on lightweight draft models or additional model structures to generate draft tokens and retrieve context from databases. Due to the draft model's small size and limited training data, model-based speculative decoding frequently becomes less effective in out-of-domain scenarios. Additionally, the time cost of the drafting phase results in a low upper limit on acceptance length during the verification step, limiting overall efficiency. This paper proposes RASD (Retrieval-Augmented Speculative Decoding), which adopts retrieval methods to enhance model-based speculative decoding. We introduce tree pruning and tree fusion to achieve this. Specifically, we develop a pruning method based on the draft model's probability distribution to construct the optimal retrieval tree. Second, we employ the longest prefix matching algorithm to merge the tree generated by the draft model with the retrieval tree, resulting in a unified tree for verification. Experimental results demonstrate that RASD achieves state-of-the-art inference acceleration across tasks such as DocQA, Summary, Code, and In-Domain QA. Moreover, RASD exhibits strong scalability, seamlessly integrating with various speculative decoding approaches, including both generation-based and retrieval-based methods.

Speculative decoding generally dictates having a small, efficient draft model that is either pretrained or distilled offline to a particular target model series, for instance, Llama or Qwen models. However, within online deployment settings, there are two major challenges: 1) usage of a target model that is incompatible with the draft model; 2) expectation of latency improvements over usage and time. In this work, we propose OmniDraft, a unified framework that enables a single draft model to operate with any target model and adapt dynamically to user data. We introduce an online n-gram cache with hybrid distillation fine-tuning to address the cross-vocabulary mismatch across draft and target models; and further improve decoding speed by leveraging adaptive drafting techniques. OmniDraft is particularly suitable for on-device LLM applications where model cost, efficiency and user customization are the major points of contention. This further highlights the need to tackle the above challenges and motivates the ``one drafter for all'' paradigm. We showcase the proficiency of the OmniDraft framework by performing online learning on math reasoning, coding and text generation tasks. Notably, OmniDraft enables a single Llama-68M model to pair with various target models including Vicuna-7B, Qwen2-7B and Llama3-8B models for speculative decoding; and additionally provides up to 1.5-2x speedup.

Autoregressive large language models (LLMs) deliver strong performance but require inherently sequential decoding, leading to high inference latency and poor GPU utilization. Speculative decoding mitigates this bottleneck by using a fast draft model whose outputs are verified in parallel by the target LLM; however, existing methods still rely on autoregressive drafting, which remains sequential and limits practical speedups. Diffusion LLMs offer a promising alternative by enabling parallel generation, but current diffusion models typically underperform compared with autoregressive models. In this paper, we introduce DFlash, a speculative decoding framework that employs a lightweight block diffusion model for parallel drafting. By generating draft tokens in a single forward pass and conditioning the draft model on context features extracted from the target model, DFlash enables efficient drafting with high-quality outputs and higher acceptance rates. Experiments show that DFlash achieves over 6x lossless acceleration across a range of models and tasks, delivering up to 2.5x higher speedup than the state-of-the-art speculative decoding method EAGLE-3.

Speculative Decoding (SD) accelerates large language model inference by allowing a lightweight draft model to propose tokens that are subsequently verified in parallel by a larger target model. Recent approaches introduce lossy verification schemes to further improve efficiency by relaxing strict distributional matching. Yet such relaxation silently rewrites the decoding distribution, and the resulting acceleration can come at the cost of unstable, sometimes severely degraded generation quality. In this work, we present a principled analysis of the distributions induced by lossy verification methods. We show that many seemingly distinct approaches differ only superficially and can be classified into two categories: truncation-based verification and collaborative verification. We further construct a diagnostic evaluation framework across curated benchmarks. For truncation-based methods, we identify a fundamental pitfall: performance can degrade significantly compared to the true truncation sampling baseline due to distributional distortion. For collaborative verification, we uncover a key principles: controlling the overshoot of draft probabilities relative to target probabilities is essential to prevent low-quality outputs. Our code is available at https://github.com/ZhouYuxuanYX/Fast-HSD.

Diffusion-based Large Language Models (dLLMs) have emerged as a competitive alternative to autoregressive models, offering unique advantages through bidirectional attention and parallel generation paradigms. However, the generation results of current parallel decoding methods deviate from stepwise decoding, introducing potential performance degradation, which limits their practical deployment. To address this problem, we propose Self Speculative Decoding (SSD), a lossless inference acceleration method that leverages the dLLM itself as both speculative decoding drafter and verifier without auxiliary modules. SSD introduces a self-drafting mechanism where the model generates predictions for multiple positions, then verifies them through hierarchical verification trees in a single forward pass. Unlike traditional speculative decoding that requires separate draft models, SSD eliminates model redundancy and memory overhead by exploiting the dLLM's inherent parallel prediction capability for multiple positions. This self-speculative approach allows the model to progressively verify and accept multiple tokens in a single forward pass. Our experiments demonstrate that SSD achieves up to 3.46times speedup while keeping the output identical to stepwise decoding on open source models such as LLaDA and Dream. Code will be made publicly available on GitHub.

Speculative decoding (SD) accelerates large language model inference by employing a faster draft model for generating multiple tokens, which are then verified in parallel by the larger target model, resulting in the text generated according to the target model distribution. However, identifying a compact draft model that is well-aligned with the target model is challenging. To tackle this issue, we propose DistillSpec that uses knowledge distillation to better align the draft model with the target model, before applying SD. DistillSpec makes two key design choices, which we demonstrate via systematic study to be crucial to improving the draft and target alignment: utilizing on-policy data generation from the draft model, and tailoring the divergence function to the task and decoding strategy. Notably, DistillSpec yields impressive 10 - 45% speedups over standard SD on a range of standard benchmarks, using both greedy and non-greedy sampling. Furthermore, we combine DistillSpec with lossy SD to achieve fine-grained control over the latency vs. task performance trade-off. Finally, in practical scenarios with models of varying sizes, first using distillation to boost the performance of the target model and then applying DistillSpec to train a well-aligned draft model can reduce decoding latency by 6-10x with minimal performance drop, compared to standard decoding without distillation.

Deployment of autoregressive large language models (LLMs) is costly, and as these models increase in size, the associated costs will become even more considerable. Consequently, different methods have been proposed to accelerate the token generation process and reduce costs. Speculative decoding (SD) is among the most promising approaches to speed up the LLM decoding process by verifying multiple tokens in parallel and using an auxiliary smaller draft model to generate the possible tokens. In SD, usually, one draft model is used to serve a specific target model; however, in practice, LLMs are diverse, and we might need to deal with many target models or more than one target model simultaneously. In this scenario, it is not clear which draft model should be used for which target model, and searching among different draft models or training customized draft models can further increase deployment costs. In this paper, we first introduce a novel multi-target scenario for the deployment of draft models for faster inference. Then, we present a novel, more efficient sorted speculative decoding mechanism that outperforms regular baselines in multi-target settings. We evaluated our method on Spec-Bench in different settings, including base models such as Vicuna 7B, 13B, and LLama Chat 70B. Our results suggest that our draft models perform better than baselines for multiple target models at the same time.

Speculative decoding speeds up LLM inference by using a small draft model to propose multiple tokens that a target model verifies in parallel. Extending this idea to batches is essential for production serving, but it introduces the ragged tensor problem: sequences in the same batch accept different numbers of draft tokens, breaking right-alignment and corrupting position IDs, attention masks, and KV-cache state. We show that several existing batch implementations violate output equivalence-the fundamental requirement that speculative decoding must produce identical token sequences to standard autoregressive generation. These violations occur precisely due to improper handling of the ragged tensor problem. In response, we (1) characterize the synchronization requirements that guarantee correctness, (2) present a correctness-first batch speculative decoding EQSPEC that exposes realignment as consuming 40% of overhead, and (3) introduce EXSPEC, which maintains a sliding pool of sequences and dynamically forms same-length groups, to reduce the realignment overhead while preserving per-sequence speculative speedups. On the SpecBench dataset, across Vicuna-7B/68M, Qwen3-8B/0.6B, and GLM-4-9B/0.6B target/draft pairs, our approach achieves up to 3times throughput improvement at batch size 8 compared to batch size 1, with efficient scaling through batch size 8, while maintaining 95% output equivalence. Our method requires no custom kernels and integrates cleanly with existing inference stacks. Our code is available at https://github.com/eBay/spec_dec.

Speculative decoding accelerates large language model inference by drafting future tokens cheaply and verifying them with the target model in parallel. Block drafters score a whole block of future tokens in one forward pass, yet standard decoding verifies only the top-scoring chain and discards the other candidates. Because these candidates are already scored, verifying more of them adds target computation but no extra drafting. We introduce CAST (Cost-Aware Speculative Trees), which packs these candidates into a tree and verifies it in a single target pass, leaving the target model, drafter weights, and decoding rule untouched. To decide how wide the tree should be, CAST adds candidates while the expected gain from the next one outweighs the verification time it adds. The width therefore adapts to each deployment from a latency measurement, without sweeping over widths. We evaluate CAST across five domains on three GPU generations and two model families. At its predicted width, CAST is faster than the standard chain in all eight settings, by up to 43%. We also find that the best width depends strongly on the deployment. Where verification cost jumps at a kernel boundary, a 128-token tree is only 2% faster than the standard chain, whereas the tree at the predicted width is 20% faster. Furthermore, we prove that CAST leaves the target output distribution unchanged under both greedy and sampled decoding. Code is available at https://github.com/js-lee-AI/CAST.

Speculative decoding (SD) accelerates autoregressive Large Language Models (LLMs) by drafting multiple tokens and verifying them in parallel, but it faces a scaling limitation: increasing the draft budget improves speed only when acceptance remains high and drafting overhead stays low. This ceiling has been difficult to break because prior head-based SD methods face a causality-efficiency dilemma. Autoregressive drafters produce path-conditioned candidates that are effective for tree speculative decoding with higher acceptance length, but their drafting cost grows with tree depth. Bidirectional block-diffusion drafters generate all positions in one pass, but their branch-agnostic marginals can form individually plausible yet mutually inconsistent trees, wasting budget and reducing acceptance. We propose JetSpec, a head-based SD framework that combines one-forward drafting efficiency with branch-wise causal conditioning. JetSpec trains a causal parallel draft head over fused hidden states from the frozen target model, producing candidate trees whose scores align with the target model's autoregressive factorization. This enables JetSpec to convert larger draft budgets into longer accepted prefixes and higher end-to-end speedup. Across math, coding, and chat benchmarks on dense and MoE Qwen3 models, JetSpec consistently outperforms bidirectional-head and tree-based SD baselines. On H100 GPUs, JetSpec achieves up to 9.64x speedup on MATH-500 and 4.58x on open-ended conversational workloads, with further latency gains demonstrated through vLLM integration under realistic serving loads. Our code and models are available at https://github.com/hao-ai-lab/JetSpec.

Autoregressive decoding in Large Language Models (LLMs) is inherently sequential, creating a latency bottleneck that scales linearly with output length. While ``Decomposition-and-Fill'' methods like Skeleton-of-Thought attempt to parallelize generation via external orchestration, they suffer from coherence drift due to the lack of cross-stream communication. In this work, we introduce the Parallel Decoder Transformer (PDT), a parameter-efficient architecture that embeds coordination primitives directly into the inference process of a frozen pre-trained model. Instead of retraining the base model, PDT injects lightweight Speculative Note Conditioning (SNC) adapters that allow parallel decoding streams to synchronize via a shared, dynamic latent space. We formulate coordination as a speculative consensus problem, where sibling streams broadcast semantic ``notes'' to a global bus, gated by a learned verification head. We validate our approach on a 50,000-step curriculum using a frozen 20B-parameter backbone. Our results demonstrate that PDT achieves effective self-correction, reaching 77.8\% precision in coverage prediction and recovering approximate serial semantics without modifying the trunk weights. This establishes PDT as a scalable, efficient alternative to full model fine-tuning for structured parallel generation.

Speculative decoding accelerates autoregressive generation by drafting a block of tokens that the target model verifies left-to-right, committing only the longest accepted prefix. Block (DLM-style) drafters predict the whole block in parallel, which is fast but trained with a full-block cross-entropy that supervises every position against the gold continuation -- even though inference discards every token after the first rejection. Recent acceptance-aware objectives patch this by reweighting the full-block loss; we instead use teacher-forced learning as a motivation for how supervision should concentrate on the accepted prefix. A mask-only block drafter has no input-side channel for gold-prefix conditioning, so AUF approximates that prefix-sensitive supervision on the loss side by keeping the cross-entropy support only through the drafter's first predicted failure. AUF is a single, detached change to the CE support -- no auxiliary objective, no verifier rollouts, and no change to the inference pipeline or the exactness contract. Within fixed drafter backbones and serving settings on Qwen3-8B, AUF raises the DFlash drafter's average emitted length τ, averaged over six benchmarks, from 2.40 to 2.61, with a gain on every benchmark, and transfers to Domino's two-branch head (2.56 to 2.68). Two findings sharpen the picture: the decay-only baseline reaches higher token accuracy on the shared block mask yet decodes worse, and on DFlash, once AUF truncates the support, the standard exponential position-decay weighting becomes empirically inert.

Sparse Mixture-of-Experts (MoE) models have become an important approach for scaling Large Language Models (LLMs), but their inference efficiency depends strongly on expert activation patterns. Speculative decoding (SD) accelerates autoregressive generation by verifying multiple draft tokens in parallel, yet existing draft selection strategies primarily optimize acceptance likelihood. In large-scale MoE models, however, selecting draft tokens also determines the union of experts activated during verification. We observe that confidence-driven SD can introduce expert scattering: high-probability draft tokens may route to disjoint experts, increasing expert-weight memory traffic and reducing the speedup from speculation. Motivated by this observation, we revisit draft-tree selection under the non-uniform memory-cost structure of MoE inference. We propose EcoSpec, a cost-aware speculative decoding framework that incorporates predicted marginal expert activation cost into draft selection. With a lightweight expert predictor and a dynamic expert buffer, EcoSpec favors draft paths that preserve high acceptance likelihood while reusing experts already covered by the current verification set, without modifying the target-model verification rule. We evaluate EcoSpec on three large-scale MoE models, including DeepSeek-V3.1 (671B), Qwen3-235B-A22B, and GPT-OSS-120B, across reasoning, coding, question-answering, and dialogue benchmarks. EcoSpec consistently reduces active expert footprints and improves end-to-end decoding speed, achieving up to 1.62times speedup. These results show that accounting for expert activation cost is important for efficient speculative decoding in large-scale MoE models.

We study how to scale reasoning token budgets for competitive programming through two complementary approaches: training-time reinforcement learning (RL) and test-time parallel thinking. During RL training, we observe an approximately log-linear relationship between validation accuracy and the average number of generated reasoning tokens over successive checkpoints, and show two ways to shift this training trajectory: verification RL warmup raises the starting point, while randomized clipping produces a steeper trend in the observed regime. As scaling single-generation reasoning during RL quickly becomes expensive under full attention, we introduce a multi-round parallel thinking pipeline that distributes the token budget across threads and rounds of generation, verification, and refinement. We train the model end-to-end on this pipeline to match the training objective to the test-time structure. Starting from Seed-OSS-36B, the full system with 16 threads and 16 rounds per thread matches the underlying RL model's oracle pass@16 at pass@1 using 7.6 million tokens per problem on average, and surpasses GPT-5-high on 456 hard competitive programming problems from AetherCode.

The autoregressive nature of large language models (LLMs) remains a significant bottleneck for inference, particularly in complex agentic workloads. While speculative decoding (SD) accelerates inference, current approaches rely on static drafting paradigms, utilising either autoregressive drafting models for reasoning or diffusion-based parallel drafting models for structured outputs. We empirically find that drafting accuracy fluctuates dramatically within a single sequence, leaving significant performance unrealised by static paradigms and coarse-grained routing. To address this volatility, we introduce WhiFlash, the first cross-paradigm SD method that unifies autoregressive and diffusion-based parallel drafting under a single token-level controller. WhiFlash adopts a fine-grained routing mechanism that employs either a lightweight entropy-based or a learned neural policy, both parametrised to provide a tunable balance between expected token gain and latency. To make high-frequency switching computationally viable, we introduce novel cache-management optimisations, Lazy Catch-up and KV-only Prefill, reducing switching overhead to below 7% of per-round latency. By capitalising on the complementary strengths of fundamentally distinct drafting architectures, WhiFlash achieves significantly higher acceptance lengths, yielding category-specific throughput gains of up to 69.6% over the state-of-the-art autoregressive EAGLE-3 and 37.3% over the diffusion-based DFlash.

Speculative decoding has emerged as a promising approach to accelerate autoregressive inference in large language models (LLMs). Self-draft methods, which leverage the base LLM itself for speculation, avoid the overhead of auxiliary draft models but face limitations: shallow layers often produce overconfident yet incorrect token predictions, and the presence of difficult tokens in a draft sequence forces redundant computation through deeper layers, undermining both draft acceptance and overall speedup. To address these issues, we propose a novel self-draft framework that suppresses spurious confidence via layer-wise temperature annealing in early-exit decision and adaptively bounds speculation length based on token-wise decoding difficulty. By reprocessing the hidden states of draft tokens in a unified parallel pass through deep layers, our method maintains exact output equivalence with the original model while maximizing computational efficiency. It requires no modifications to the base LLM parameters and achieves up to 2.33x wall-time speedup over standard autoregressive decoding across diverse long-form generation tasks and multiple model architectures.

Speculative decoding accelerates autoregressive large language model (LLM) inference by using a lightweight draft model to propose candidate tokens that are then verified in parallel by the target model. The speedup is significantly determined by the acceptance rate, yet standard training minimizes Kullback-Leibler (KL) divergence as a proxy objective. While KL divergence and acceptance rate share the same global optimum, small draft models, having limited capacity, typically converge to suboptimal solutions where minimizing KL does not guarantee maximizing acceptance rate. To address this issue, we propose LK losses, special training objectives that directly target acceptance rate. Comprehensive experiments across four draft architectures and six target models, ranging from 8B to 685B parameters, demonstrate consistent improvements in acceptance metrics across all configurations compared to the standard KL-based training. We evaluate our approach on general, coding and math domains and report gains of up to 8-10% in average acceptance length. LK losses are easy to implement, introduce no computational overhead and can be directly integrated into any existing speculator training framework, making them a compelling alternative to the existing draft training objectives.

Speculative decoding accelerates autoregressive generation by having a cheap draft propose tokens that a target verifies in parallel. Frontier models increasingly ship a built-in Multi-Token-Prediction (MTP/NEXTN) draft head under the assumption that the draft is negligibly cheap. At million-token context this breaks: an MTP draft head typically runs full attention over the entire KV cache at every draft step, so its read grows linearly with context and comes to dominate the draft cost -- precisely where speculation is most valuable. The effect compounds with draft length (a deep native draft can turn net-negative, slower than no speculation) and sharpens under hybrid/linear-attention targets, where cheaper verification leaves the draft's full-attention read exposed. We apply a StreamingLLM-style sliding window plus attention sink to the draft's attention only (Windowed-MTP), leaving full-attention verification intact. It is training-free, drop-in, and lossless by construction: the full-attention target still decides every accepted token, so windowing changes only which tokens are proposed, never which are accepted. It bounds the draft's KV working set to a constant, dropping ~99% of KV entries at 1M. Across three architecture families (Qwen GDN-MoE 35B/122B and a Mamba2-hybrid NoPE 120B) at 1M context on a single GPU in SGLang, windowing cuts the per-decode-step cost over the shipping native MTP draft by +28% to +44%, an input-invariant margin that widens with context. Since per-token latency is this cost divided by acceptance length, at matched acceptance end-to-end decode latency improves by the same amount, and more where windowing also lifts acceptance, while preserving the target's verified output distribution. Finally, the unread draft KV -- 7.7-11% of total KV at 1M -- is reclaimed via a compact ring buffer at no acceptance or quality cost.

Many deep learning applications benefit from using large models with billions of parameters. Training these models is notoriously expensive due to the need for specialized HPC clusters. In this work, we consider alternative setups for training large models: using cheap "preemptible" instances or pooling existing resources from multiple regions. We analyze the performance of existing model-parallel algorithms in these conditions and find configurations where training larger models becomes less communication-intensive. Based on these findings, we propose SWARM parallelism, a model-parallel training algorithm designed for poorly connected, heterogeneous and unreliable devices. SWARM creates temporary randomized pipelines between nodes that are rebalanced in case of failure. We empirically validate our findings and compare SWARM parallelism with existing large-scale training approaches. Finally, we combine our insights with compression strategies to train a large Transformer language model with 1B shared parameters (approximately 13B before sharing) on preemptible T4 GPUs with less than 200Mb/s network.

We present speculative sampling, an algorithm for accelerating transformer decoding by enabling the generation of multiple tokens from each transformer call. Our algorithm relies on the observation that the latency of parallel scoring of short continuations, generated by a faster but less powerful draft model, is comparable to that of sampling a single token from the larger target model. This is combined with a novel modified rejection sampling scheme which preserves the distribution of the target model within hardware numerics. We benchmark speculative sampling with Chinchilla, a 70 billion parameter language model, achieving a 2-2.5x decoding speedup in a distributed setup, without compromising the sample quality or making modifications to the model itself.

Despite the remarkable strides made by autoregressive language models, their potential is often hampered by the slow inference speeds inherent in sequential token generation. Blockwise parallel decoding (BPD) was proposed by Stern et al. (2018) as a way to improve inference speed of language models. In this paper, we make two contributions to understanding and improving BPD drafts. We first offer an analysis of the token distributions produced by the BPD prediction heads. Secondly, we use this analysis to inform algorithms to improve BPD inference speed by refining the BPD drafts using small n-gram or neural language models. We empirically show that these refined BPD drafts yield a higher average verified prefix length across tasks.

Accelerating inference in Large Language Models (LLMs) is critical for real-time interactions, as they have been widely incorporated into real-world services. Speculative decoding, a fully algorithmic solution, has gained attention for improving inference speed by drafting and verifying tokens, thereby generating multiple tokens in a single forward pass. However, current drafting strategies usually require significant fine-tuning or have inconsistent performance across tasks. To address these challenges, we propose Hierarchy Drafting (HD), a novel lossless drafting approach that organizes various token sources into multiple databases in a hierarchical framework based on temporal locality. In the drafting step, HD sequentially accesses multiple databases to obtain draft tokens from the highest to the lowest locality, ensuring consistent acceleration across diverse tasks and minimizing drafting latency. Our experiments on Spec-Bench using LLMs with 7B and 13B parameters demonstrate that HD outperforms existing database drafting methods, achieving robust inference speedups across model sizes, tasks, and temperatures.

Developing an educational test can be expensive and time-consuming, as each item must be written by experts and then evaluated by collecting hundreds of student responses. Moreover, many tests require multiple distinct sets of questions administered throughout the school year to closely monitor students' progress, known as parallel tests. In this study, we focus on tests of silent sentence reading efficiency, used to assess students' reading ability over time. To generate high-quality parallel tests, we propose to fine-tune large language models (LLMs) to simulate how previous students would have responded to unseen items. With these simulated responses, we can estimate each item's difficulty and ambiguity. We first use GPT-4 to generate new test items following a list of expert-developed rules and then apply a fine-tuned LLM to filter the items based on criteria from psychological measurements. We also propose an optimal-transport-inspired technique for generating parallel tests and show the generated tests closely correspond to the original test's difficulty and reliability based on crowdworker responses. Our evaluation of a generated test with 234 students from grades 2 to 8 produces test scores highly correlated (r=0.93) to those of a standard test form written by human experts and evaluated across thousands of K-12 students.

Large language model (LLM) decoding involves generating a sequence of tokens based on a given context, where each token is predicted one at a time using the model's learned probabilities. The typical autoregressive decoding method requires a separate forward pass through the model for each token generated, which is computationally inefficient and poses challenges for deploying LLMs in latency-sensitive scenarios. The main limitations of current decoding methods stem from their inefficiencies and resource demands. Existing approaches either necessitate fine-tuning smaller models, which is resource-intensive, or rely on fixed retrieval schemes to construct drafts for the next tokens, which lack adaptability and fail to generalize across different models and contexts. To address these issues, we introduce a novel methodology called ADED, which accelerates LLM decoding without requiring fine-tuning. Our approach involves an adaptive draft-verification process that evolves over time to improve efficiency. We utilize a tri-gram matrix-based LLM representation to dynamically approximate the output distribution of the LLM, allowing the model to adjust to changing token probabilities during the decoding process. Additionally, we implement a draft construction mechanism that effectively balances exploration and exploitation, ensuring that the drafts generated are both diverse and close to the true output distribution of the LLM. The importance of this design lies in its ability to optimize the draft distribution adaptively, leading to faster and more accurate decoding. Through extensive experiments on various benchmark datasets and LLM architectures, we demonstrate that ADED significantly accelerates the decoding process while maintaining high accuracy, making it suitable for deployment in a wide range of practical applications.

Speculative decoding (SD) is a promising method for accelerating the decoding process of Large Language Models (LLMs). The efficiency of SD primarily hinges on the consistency between the draft model and the verify model. However, existing drafting approaches typically require additional modules to be trained, which can be challenging to implement and ensure compatibility across various LLMs. In this paper, we propose CLaSp, an in-context layer-skipping strategy for self-speculative decoding. Unlike prior methods, CLaSp does not require additional drafting modules or extra training. Instead, it employs a plug-and-play mechanism by skipping intermediate layers of the verify model to construct a compressed draft model. Specifically, we develop a dynamic programming algorithm that optimizes the layer-skipping process by leveraging the complete hidden states from the last verification stage as an objective. This enables CLaSp to dynamically adjust its layer-skipping strategy after each verification stage, without relying on pre-optimized sets of skipped layers. Experimental results across diverse downstream tasks demonstrate that CLaSp achieves a speedup of 1.3x ~ 1.7x on LLaMA3 series models without altering the original distribution of the generated text.

Reasoning training incentivizes LLMs to produce long chains of thought (long CoT), which among other things, allows them to explore solution strategies with self-checking. This results in higher accuracy, but inflates context length, token/compute cost, and answer latency. We ask: Can current models leverage their metacognition to provide other combinations on this Pareto frontier, e.g., better accuracy with lower context length and/or latency? Abstractly, we view the model as an improvement operator on its own "thoughts" with a continuum of possible strategies. We identify an interesting inference family Parallel-Distill-Refine (PDR), which performs the following: (i) generate diverse drafts in parallel; (ii) distill them into a bounded, textual workspace; and (iii) refine conditioned on this workspace, producing an output that seeds the next round. Importantly, context length (hence compute cost) is controllable via degree of parallelism, and is no longer conflated with the total number of generated tokens. We report PDR instantiations of current models that give better accuracy than long CoT while incurring lower latency. Setting degree of parallelism to 1 yields an interesting subcase, Sequential Refinement (SR) (iteratively improve a single candidate answer) which provides performance superior to long CoT. Success of such model orchestrations raises the question whether further training could shift the Pareto frontier. To this end, we train an 8B thinking model with Reinforcement Learning (RL) to make it consistent with PDR as the inference method. On math tasks with verifiable answers, iterative pipelines surpass single-pass baselines at matched sequential budgets, with PDR delivering the largest gains (e.g., +11% on AIME 2024 and +9% on AIME 2025).

Parallel reasoning improves the accuracy and robustness of large reasoning models by exploring multiple solution paths, but its computational cost grows with reasoning depth and branch count. Existing methods for managing these parallel paths typically rely on final-answer consensus, local token confidence, or isolated intermediate probes. However, these signals are often delayed, weakly tied to actual reasoning progress, or too noisy for dynamic, branch-level control. To address these limitations, we introduce ParaTempo, a training-free asynchronous parallel reasoning framework. ParaTempo is driven by temporal confidence, a branch-local measure of answer-space convergence. Each branch is periodically probed for a tentative answer probability distribution, and temporal confidence quantifies how sharply the recent intermediate probes concentrate on a dominant answer. Once sufficient evidence has accumulated, ParaTempo drives its entire control process from this single signal: low-confidence branches are pruned, branches that persistently commit to their dominant answer are retired early, freed computation is reallocated by forking new branches, and generation stops globally once the confidence-weighted vote concentrates. Without requiring synchronization among reasoning trajectories, ParaTempo adaptively allocates computation based on branch-level convergence. Experiments on challenging mathematical and scientific reasoning benchmarks show that ParaTempo reduces average latency by 21.8-32.2% and total token usage by 18.1-30.3% while maintaining competitive accuracy. Moreover, temporal confidence exhibits stronger temporal stability and predictive power for future branch convergence than token-level and instantaneous signals.

Speculative decoding losslessly accelerates autoregressive language models by verifying multiple draft tokens in parallel. Diffusion-based drafters further reduce proposal latency by predicting an entire token block in parallel, but their position-wise distributions are marginal rather than conditioned on tokens selected along each draft path. Existing recurrent correction incorporates causal information along a single draft chain, whereas diffusion-based tree construction broadens candidate coverage without carrying this correction along individual branches. We introduce DARTree, a training-free speculative decoding method that extends a pretrained AR correction head from chains to trees. DARTree first constructs a fixed-width candidate tree by expanding and scoring all nodes at each depth in a single batch, and then only applies best-first pruning to select the verification tree, decoupling AR-head inference from sequential heap operations. Across seven math, code, and chat benchmarks, DARTree achieves the highest average acceptance length and speedup in all four model--temperature configurations, accepting up to 12.97 tokens per verification round, 98.6\% more than DFlash and 27.9\% more than Domino in the same setting, and reaching up to 9.73times lossless speedup over locally measured autoregressive decoding.

We present RLM-Cascade, a proxy-layer system that applies speculative decoding at the response level to reduce LLM API costs without requiring model architecture access or a shared vocabulary. A fast, inexpensive draft model generates a candidate response; a capable verify model accepts, enhances, or is bypassed entirely depending on a lightweight complexity router. On a real-world agentic coding workload (Claude Code), RLM-Cascade achieves a draft-use rate of 88.8% across 125 production requests, reducing API cost by 45.8% relative to a direct Opus baseline. Counter-intuitively, the proxy also reduces end-to-end latency: median response time is 2,026 ms versus 3,698 ms for Native Opus -- a 1.83X speedup at p50 -- because the SKIPPED path (DeepSeek only, no Opus call) dominates the workload distribution. Quality matches or exceeds the Opus baseline: 100% pass rate on a 20-task Code/Math/Instruct benchmark versus 95% for Native Opus. We further describe a rule-based complexity router that selects the SKIPPED path for simple agentic turns and a hybrid tool-call strategy that bypasses the speculative pipeline for schema-critical tool-selection turns. RLM-Cascade is deployed in production as an enterprise AI infrastructure component and published as open source with a live metrics dashboard and Prometheus endpoint.

The formalization of existing mathematical proofs is a notoriously difficult process. Despite decades of research on automation and proof assistants, writing formal proofs remains arduous and only accessible to a few experts. While previous studies to automate formalization focused on powerful search algorithms, no attempts were made to take advantage of available informal proofs. In this work, we introduce Draft, Sketch, and Prove (DSP), a method that maps informal proofs to formal proof sketches, and uses the sketches to guide an automated prover by directing its search to easier sub-problems. We investigate two relevant setups where informal proofs are either written by humans or generated by a language model. Our experiments and ablation studies show that large language models are able to produce well-structured formal sketches that follow the same reasoning steps as the informal proofs. Guiding an automated prover with these sketches enhances its performance from 20.9% to 39.3% on a collection of mathematical competition problems.

Speculative decoding has demonstrated its effectiveness in accelerating the inference of large language models while maintaining a consistent sampling distribution. However, the conventional approach of training a separate draft model to achieve a satisfactory token acceptance rate can be costly. Drawing inspiration from early exiting, we propose a novel self-speculative decoding framework Kangaroo, which uses a fixed shallow sub-network as a self-draft model, with the remaining layers serving as the larger target model. We train a lightweight and efficient adapter module on top of the sub-network to bridge the gap between the sub-network and the full model's representation ability. It is noteworthy that the inference latency of the self-draft model may no longer be negligible compared to the large model, necessitating strategies to increase the token acceptance rate while minimizing the drafting steps of the small model. To address this challenge, we introduce an additional early exiting mechanism for generating draft tokens. Specifically, we halt the small model's subsequent prediction during the drafting phase once the confidence level for the current token falls below a certain threshold. Extensive experiments on the Spec-Bench demonstrate the effectiveness of Kangaroo. Under single-sequence verification, Kangaroo achieves speedups up to 1.68times on Spec-Bench, outperforming Medusa-1 with 88.7\% fewer additional parameters (67M compared to 591M). The code for Kangaroo is available at https://github.com/Equationliu/Kangaroo.

Recent breakthroughs in large language models (LLMs) have led to notable successes in complex reasoning tasks, such as mathematical problem solving. A common strategy for improving performance is parallel thinking, in which multiple reasoning traces are generated and the final prediction is made using aggregation schemes like majority voting or best-of-N decoding. However, two key challenges persist. First, multi-sample decoding incurs substantial inference latency, especially for long-form outputs. Second, effective mechanisms for reliably assessing the correctness of individual reasoning traces are still limited. To address these challenges, we introduce One-Token Verification (OTV), a computational method that estimates reasoning correctness in a single forward pass during generation. OTV is activated by a learnable token and integrated into the LLM via low-rank adaptation to probe internal reasoning signals through the key-value cache, supporting token-level correctness estimation at any stage of generation without disrupting primary reasoning. Experiments on mathematical reasoning benchmarks demonstrate that OTV consistently surpasses existing verifiers. Additionally, OTV reduces token usage by up to 90% through correctness-guided early termination, prioritizing shorter, more reliable solutions.

Reinforcement learning (RL) has become a representative post-training paradigm for LLMs, enabling strong reasoning and agentic capabilities. However, rollout generation remains a dominant latency bottleneck because autoregressive sampling decodes responses sequentially and a small number of long-tailed generations often determine completion time. Speculative decoding (SD) offers a natural way to address this bottleneck, as it is a well-established technique for serving fixed LLMs that reduces latency by rapidly drafting tokens and accepting them through parallel verification while preserving the target-model distribution. However, its practical speedups do not directly carry over to RL rollouts: (i) the evolving target policy makes any fixed drafter increasingly mismatched with the policy's output distribution; and (ii) active batch sizes shrink throughout rollout decoding, shifting decoding from compute-bound to memory-bound regimes where parallel verification can exploit underutilized compute. Therefore, accelerating RL rollouts requires both a drafter that remains effective under long, high-temperature generations from an evolving policy and system-aware use of SD that avoids compute-bound regimes. We present EfficientRollout, a system-aware self-SD framework designed to address this gap for RL rollouts. EfficientRollout induces a quantized drafter from the target model (i.e. self-speculative decoding), keeping it coupled to the evolving policy without separate drafter pretraining or online adaptation. It further coordinates a system-aware SD toggle policy with acceptance-aware draft-length adaptation, enabling speculation only in beneficial regimes while matching the drafting budget to evolving drafter quality. EfficientRollout reduces rollout and end-to-end latency by up to 19.6% and 12.7%, respectively, over an accelerated AR rollout baseline, while preserving final model quality.

Speculative decoding, which combines a draft model with a target model, has emerged as an effective approach to accelerate large language model (LLM) inference. However, existing methods often face a trade-off between the acceptance rate and decoding speed in downstream tasks due to the limited capacity of the draft model, making it difficult to ensure efficiency across diverse tasks. To address this problem, we propose a speculative decoding algorithm tailored for downstream task optimization. It includes an automatic task partitioning and assigning method, which automatically categorizes downstream tasks into different sub-tasks and assigns them to a set of heterogeneous draft models. Each draft model is aligned with the target model using task-specific data, thereby enhancing the consistency of inference results. In addition, our proposed method incorporates an online lightweight prompt classifier to dynamically route prompts to the appropriate draft model. Experimental results demonstrate that the proposed method improves draft accuracy by 6% to 50% over vanilla speculative decoding, while achieving a speedup of 1.10x to 2.64x in LLM inference.

Inference efficiency in Large Language Models (LLMs) is fundamentally limited by their serial, autoregressive generation, especially as reasoning becomes a key capability and response sequences grow longer. Speculative decoding (SD) offers a powerful solution, providing significant speed-ups through its lightweight drafting and parallel verification mechanism. While existing work has nearly saturated improvements in draft effectiveness and efficiency, this paper advances SD from a new yet critical perspective: the verification cost. We propose TriSpec, a novel ternary SD framework that, at its core, introduces a lightweight proxy to significantly reduce computational cost by approving easily verifiable draft sequences and engaging the full target model only when encountering uncertain tokens. TriSpec can be integrated with state-of-the-art SD methods like EAGLE-3 to further reduce verification costs, achieving greater acceleration. Extensive experiments on the Qwen3 and DeepSeek-R1-Distill-Qwen/LLaMA families show that TriSpec achieves up to 35\% speedup over standard SD, with up to 50\% fewer target model invocations while maintaining comparable accuracy.

Speculative decoding accelerates LLM inference, but SOTA hidden-state-based drafters suffer from long-range decay: draft accuracy degrades as the speculative step increases. Existing work attributes this decay to train-inference mismatch and proposes test-time training (TTT) as a remedy, yet we observe that long-range decay persists even in TTT-trained drafters. We revisit long-range decay from the perspective of context information preservation. In hidden-state reuse, we argue the target hidden state acts as a biased context compression: it aggregates historical token information according to the attention query at the current position, yielding a compact representation optimized for immediate next-token prediction. This compression can suppress information less relevant to the current query but important for later speculative steps. In contrast, the target model's KV cache serves as an explicit context, retaining the complete set of token-wise KV representations. We therefore posit the KV-Reuse Hypothesis: allowing the draft model to reuse the target KV cache can provide richer signals for long-horizon drafting. To test this hypothesis, we introduce KVShot, a diagnostic framework that compares three reuse paradigms: hidden-only, KV-only, and hybrid. Extensive evaluations on Qwen3-8B show that KV-Reuse improves long-range acceptance, although end-to-end speedups remain marginal under current training pipelines. Our analysis identifies two key structural bottlenecks: shallow drafters struggle to estimate target queries accurately, and draft-side KV projections receive sparse gradient signals. These findings suggest that realizing the full potential of KV-aware decoding requires moving beyond TTT toward block-wise training paradigms. By exposing these bottlenecks, KVShot provides a foundational diagnostic testbed and a clear roadmap for designing next-generation inference architectures.

Block drafters propose several tokens in one forward pass, before earlier target tokens are realised. Their rejection mixes two losses: missing within-block path information and imperfect modelling of observable information. Accepted length cannot distinguish them. We separate the two with an information floor, the minimum expected rejection at a specified conditioning order; rejection above this floor is the model gap. Estimating both from target rollouts across four domains, four open-weight targets, and a frontier API target yields three findings. First, the all-parallel floor reaches 0.286 at the final slot on Qwen3-4B, limiting even the best proposal to 71% per-slot acceptance. Second, one realised token removes 86--100% of this floor, a locality also recovered by an independent mutual-information analysis. Third, current drafters remain far above their floors: the final-slot model gap accounts for 43--64% of DFlash rejection and 85--92% of DSpark's oracle-conditioned rejection. These findings separate the value of short-range conditioning from proposal quality. Guided by this distinction, we replace a context-independent predecessor correction with a prefix-attention head that reads committed context conditional on the predecessor. With supporting backbone components, the resulting Qwen3-4B drafter improves mean serving accepted length by 3.83% over the released DSpark checkpoint across nine tasks, without increasing the conditioning order.

Scaling inference-time computation has enabled Large Language Models (LLMs) to achieve strong reasoning performance, but inherently sequential decoding leads to substantial latency, especially on complex tasks. Recent work on adaptive parallel reasoning aims to improve inference efficiency by decomposing the problem-solving process into concurrent reasoning threads when beneficial. However, existing methods on realistic tasks are either limited to supervised behavior cloning or exhibit significant accuracy drops compared to widely-used sequential long chain-of-thought (CoT) baselines. Moreover, many require customized inference engines, complicating deployment. We introduce ThreadWeaver, a framework for adaptive parallel reasoning that achieves accuracy on par with popular sequential reasoning models of comparable size while significantly reducing inference latency. ThreadWeaver's performance stems from three key innovations: 1) a two-stage parallel trajectory generator that produces large-scale, high-quality CoT data with parallel annotations for supervised fine-tuning; 2) a trie-based training-inference co-design that enables parallel reasoning on any off-the-shelf autoregressive inference engine without modifying position embeddings or KV caches; and 3) a parallelization-aware reinforcement learning framework that teaches the model to balance accuracy with effective parallelization. Across six challenging mathematical reasoning benchmarks, ThreadWeaver trained atop Qwen3-8B achieves accuracy comparable to cutting-edge sequential reasoning models (71.9% on average and 79.9% on AIME24) while delivering up to 1.53x average speedup in token latency, establishing a new Pareto frontier between accuracy and efficiency.

Working agents need to read diverse files, coordinate tools, and produce deliverables. Training such agents requires tasks built on many real files with verifiable results, but few pipelines exist to synthesize this kind of data. Existing pipelines either generate files with models, which lack realism and diversity, or build tasks on real files without task-specific verifiers, leaving result quality unchecked. We introduce GraphForge, an evidence-graph based framework that grounds both the task and its verification in real files. Starting from occupation-grounded seeds for controlled diversity, GraphForge assembles a workspace of real files for each seed and builds an evidence graph over their relations. Since the task statement and rubrics are both derived from this graph, task requirements are backed by the workspace files and each criterion is anchored to the files needed to verify it. An initial rollout further tests executability, and a revision agent repairs the task and rubrics against the original files before trajectories are collected. Fine-tuning Qwen3.6-27B on 2,169 GraphForge trajectories brings GDPVal to 1445.7 (+65.7) under OpenHands, and Workspace-Bench-Lite and SpreadsheetBench II to 63.7 (+7.7) and 24.0 (+13.7) under Claude Code. Rejection fine-tuning on the SFT model's own rollouts, with candidates selected by the evidence-anchored rubrics, yields further improvements on all three benchmarks, suggesting that the rubrics provide a useful selection signal. The data and models are available.

Speculative decoding accelerates Large Language Model (LLM) inference by verifying multiple drafted tokens in parallel. However, for Mixture-of-Experts (MoE) models, this parallelism introduces a severe bottleneck: large draft trees activate many unique experts, significantly increasing memory pressure and diminishing speedups from speculative decoding relative to autoregressive decoding. Prior methods reduce speculation depth when MoE verification becomes expensive. We propose MoE-Spec, a training-free verification-time expert budgeting method that decouples speculation depth from memory cost by enforcing a fixed expert capacity limit at each layer, loading only the experts that contribute most to verification and dropping the long tail of rarely used experts that drive bandwidth overhead. Experiments across multiple model scales and datasets show that this method yields 10--30\% higher throughput than state-of-the-art speculative decoding baselines (EAGLE-3) at comparable quality, with flexibility to trade accuracy for further latency reductions through tighter budgets.

Speculative decoding has emerged as a pivotal technique to accelerate LLM inference by employing a lightweight draft model to generate candidate tokens that are subsequently verified by the target model in parallel. However, while this paradigm successfully increases the arithmetic intensity of memory-bound inference, it causes significant compute inefficiency: the majority of draft tokens fail verification and are discarded, resulting in waste of computation. Motivated by the goal of recollecting this wasted computation, we propose a novel system that transforms discarded drafts into reusable tokens. Our key insight is to perform auto-regressive prediction at the hidden states level and postpone the integrating token information after the hidden states generation, so the draft hidden states are not contaminated by incorrect tokens, enabling hidden state reuse. To implement such a system, first we introduce a draft model architecture based on auto-regressive hidden states, which preserves richer semantics than token-based drafters to facilitate draft repurposing. Second, we design an efficient token information injection mechanism that leverages our specialized draft model to construct high-quality draft token trees and enables resampling tokens from verification failures. Third, we eliminate the overhead hidden in our design to further maximize hardware utilization. We conducted extensive evaluations against various baselines, demonstrating up to a 3.3x speedup against standard speculative decoding.

Long chain-of-thought~(CoT) has become a dominant paradigm for enhancing the reasoning capability of large reasoning models~(LRMs); however, the performance gains often come with a substantial increase in reasoning budget. Recent studies show that existing CoT paradigms tend to induce systematic overthinking, unnecessarily coupling reasoning capability with reasoning cost. Most prior approaches reduce token usage through post hoc techniques such as token compression, truncation, or length penalties, without explicitly addressing the core mechanisms of reasoning. We propose Draft-Thinking, which guides models to first learn a concise draft-style reasoning structure that retains only the critical reasoning steps. Through a progressive curriculum learning, the model stably internalizes this efficient reasoning pattern as its capability scales. Moreover, Draft-Thinking introduces adaptive prompting, which elevates reasoning depth to a flexible, model-selectable behavior. Extensive experiments demonstrate that Draft-Thinking substantially reduces reasoning budget while largely preserving reasoning performance; for example, on MATH500, it achieves an 82.6\% reduction in reasoning budget at the cost of only a 2.6\% performance drop.

The escalating demand for efficient decoding in large language models (LLMs) is particularly critical for reasoning-intensive architectures like OpenAI-o3 and DeepSeek-R1, which depend on extended chain-of-thought reasoning. This study investigates speculative decoding techniques through dense LLM architectures to establish foundational insights for accelerating reasoning tasks. While speculative decoding methods leveraging parallel draft-verification cycles have emerged as promising acceleration techniques, the scaling laws governing decoding efficiency remain under-explored compared to conventional backbone LLMs developed through Pretraining->SFT->RLHF training paradigms. In this work, we discover Log-linear Scaling Laws (Theorem 1.1, 1.2 and 1.3) governing draft model acceptance rate (or decoding speed) across three dimensions: pretraining token volume, draft model capacity, and decoding batch size. Building on these laws, we achieve Scylla, which coordinates multi-dimensional scaling for popular LLMs (Llama2/3, Qwen2.5). Empirical validation shows Scylla achieves 1.5-2.2 higher acceptance rate than EAGLE2 and 0.3 higher than EAGLE3 at temperature T = 0, with peak performance gains on summarization and QA tasks (Figure 2). Industrial inference engine deployments demonstrate 2X decoding throughput improvements over EAGLE2 (Table 5), validating the transformative potential of systematic scaling for efficient LLM inference. Code will be released later.

The standard paradigm for solving coding tasks via large language models (LLMs) is to generate-then-rank programs, where the latter step uses a verifier in the ranking process. The growing consensus is that a comprehensive verifier (e.g., a full test suite) should be prioritized over an outcome reward model (ORM) whenever possible, with little consideration given to the trade-offs involved. We aim to challenge this assumption by systematically exploring the tradeoff between speed and accuracy. We find that ORMs play a crucial role in scaling verification through trading accuracy for speed, even when a comprehensive verifier is available. Their value becomes especially apparent when used in a generate-prune-then-rank approach, where a faster but less accurate verifier removes incorrect solutions prior to ranking -- leading to a system that is 11.65x faster while only being 8.33% less accurate than the full test suite. We analyze the generate-prune-then-rank approach and show that it works by filtering out incorrect but highly ranked solutions. These findings enable the design of scalable and accurate program ranking systems.

Speculative decoding accelerates inference for Large Language Models by using a lightweight draft model to propose candidate tokens that are verified in parallel by a larger target model. Prior work shows that the draft model often dominates speculative decoding latency, since it generates tokens sequentially and incurs high cost from its language modeling head as vocabulary size grows. This exposes a fundamental trade-off in draft model design: larger vocabularies improve token coverage and agreement with the target model, but incur higher draft latency, while smaller vocabularies reduce latency at the risk of missing tokens required for accurate draft generation. We address this trade-off through vocabulary trimming for draft models, motivated by the observation that domain-specific workloads use only a small fraction of the full vocabulary. We cast draft vocabulary selection as a constrained optimization problem that balances token coverage and draft latency. Coverage is computed over assistant responses in the training data, while latency is estimated using architecture-aware FLOPs that capture the cost of the language modeling head as a function of vocabulary size. We optimize a utility function with a Tree-structured Parzen Estimator to efficiently explore the coverage-latency Pareto frontier under a minimum coverage constraint. Experiments show improved speculative decoding throughput while reducing draft vocabularies by up to 97% with high coverage. On domain-specific tasks, we achieve up to 16% latency reduction and 20% throughput improvement, and up to 6.7% throughput gains on diverse out-of-distribution tasks.