Daily Papers

Neural quantum states (NQS) provide a flexible and scalable framework for approximating quantum many-body wavefunctions. Among NQS parameterizations, autoregressive models are especially attractive because they enable exact, independent sampling from the Born distribution, avoiding the autocorrelation and mixing issues of Markov chain methods. Yet their optimization remains comparatively underexplored: Adam is a scalable method but ignores function space geometry, while stochastic reconfiguration is principled but costly and numerically fragile in large models. To address this gap, we show that variational energy minimization can be viewed as an advantage policy-gradient problem over the Born distribution, motivating trust-region optimization for NQS training. We introduce Proximal Wavefunction Optimization (PWO), a principled trust-region algorithm that clips probability-ratio changes in the amplitude channel and phase increments in the phase channel. PWO avoids explicit matrix inversion, reuses samples across multiple updates, and combines the scalability of first-order optimization with theoretical guarantees. Across Ising and frustrated J_1-J_2 one- and two-dimensional spin systems, PWO improves stability and wall-clock convergence over Adam, minSR, and SPRING. Finally, we fine-tune a 1.5B-parameter RWKV-7 model, demonstrating NQS optimization at a scale over three orders of magnitude beyond prior work.

We propose SpectroStream, a full-band multi-channel neural audio codec. Successor to the well-established SoundStream, SpectroStream extends its capability beyond 24 kHz monophonic audio and enables high-quality reconstruction of 48 kHz stereo music at bit rates of 4--16 kbps. This is accomplished with a new neural architecture that leverages audio representation in the time-frequency domain, which leads to better audio quality especially at higher sample rate. The model also uses a delayed-fusion strategy to handle multi-channel audio, which is crucial in balancing per-channel acoustic quality and cross-channel phase consistency.

Polyphonic sound event localization and detection (SELD) has many practical applications in acoustic sensing and monitoring. However, the development of real-time SELD has been limited by the demanding computational requirement of most recent SELD systems. In this work, we introduce SALSA-Lite, a fast and effective feature for polyphonic SELD using microphone array inputs. SALSA-Lite is a lightweight variation of a previously proposed SALSA feature for polyphonic SELD. SALSA, which stands for Spatial Cue-Augmented Log-Spectrogram, consists of multichannel log-spectrograms stacked channelwise with the normalized principal eigenvectors of the spectrotemporally corresponding spatial covariance matrices. In contrast to SALSA, which uses eigenvector-based spatial features, SALSA-Lite uses normalized inter-channel phase differences as spatial features, allowing a 30-fold speedup compared to the original SALSA feature. Experimental results on the TAU-NIGENS Spatial Sound Events 2021 dataset showed that the SALSA-Lite feature achieved competitive performance compared to the full SALSA feature, and significantly outperformed the traditional feature set of multichannel log-mel spectrograms with generalized cross-correlation spectra. Specifically, using SALSA-Lite features increased localization-dependent F1 score and class-dependent localization recall by 15% and 5%, respectively, compared to using multichannel log-mel spectrograms with generalized cross-correlation spectra.

Many recent multivariate time series anomaly detection (MTSAD) models incorporate cross-channel modeling, under the implicit assumption that the structure of anomalies may be spread across multiple channels. We evaluate this assumption on eight widely used public benchmarks by introducing a per-segment diagnostic framework that flags, for each labeled anomaly, whether at least one channel deviates individually from its normal history, whether the cross-channel correlation structure changes, or both. The framework shows that no cross-channel rupture occurs without an accompanying univariate deviation across a range of reasonable thresholds. A complementary metric also reveals that on six of the eight benchmarks, at least half of the labeled anomaly segments deviate univariately on 89% to 100% of their timesteps, reaching 100% on three of these datasets. To verify that our framework captures cross-channel structure when present, we construct synthetic data of phase-shifted sinusoidal channels with shared noise. Each anomalous segment is altered through one of two channel-wise corruptions that preserve the per-channel marginal distribution while breaking cross-channel structure, and our framework correctly characterizes these segments as cross-channel-only. On these data, channel-dependent (CD) models successfully exploit the cross-channel signal whereas channel-independent (CI) ones fail. The CI/CD comparison of a recent SOTA detector on real benchmarks further confirms that CD modeling brings no measurable gain. We conclude that current MTSAD benchmarks are unsuitable for validating cross-channel modeling capabilities, and we call for the development of more structurally diverse evaluation sets. The code for this study is publicly available.

Dataflow neural network accelerators efficiently process AI tasks on FPGAs, with deployment simplified by ready-to-use frameworks and pre-trained models. However, this convenience makes them vulnerable to malicious actors seeking to reverse engineer valuable Intellectual Property (IP) through Side-Channel Attacks (SCA). This paper proposes a methodology to recover the hardware configuration of dataflow accelerators generated with the FINN framework. Through unsupervised dimensionality reduction, we reduce the computational overhead compared to the state-of-the-art, enabling lightweight classifiers to recover both folding and quantization parameters. We demonstrate an attack phase requiring only 337 ms to recover the hardware parameters with an accuracy of more than 95% and 421 ms to fully recover these parameters with an averaging of 4 traces for a FINN-based accelerator running a CNN, both using a random forest classifier on side-channel traces, even with the accelerator dataflow fully loaded. This approach offers a more realistic attack scenario than existing methods, and compared to SoA attacks based on tsfresh, our method requires 940x and 110x less time for preparation and attack phases, respectively, and gives better results even without averaging traces.

We present Three-Phase Transformer (3PT), a residual-stream structural prior for decoder-only Transformers on a standard SwiGLU + RMSNorm + RoPE + GQA backbone. The hidden vector is partitioned into N equally-sized cyclic channels, each maintained by phase-respecting ops: a per-channel RMSNorm, a 2D Givens rotation between attention and FFN that rotates each channel by theta + i*(2*pi/N), and a head-count constraint aligning GQA heads with the partition. The architecture is a self-stabilizing equilibrium between scrambling and re-imposition, not a bolted-on module. The partition carves out a one-dimensional DC subspace orthogonal to the channels, into which we inject a fixed Gabriel's horn profile r(p) = 1/(p+1) as an absolute-position side-channel composing orthogonally with RoPE's relative-position rotation. The canonical N=3 borrows its metaphor from balanced three-phase AC, where three sinusoids 120 degrees apart sum to zero with no anti-correlated pair. At 123M parameters on WikiText-103, 3PT achieves -7.20% perplexity (-2.62% bits-per-byte) over a matched RoPE-Only baseline at +1,536 parameters (0.00124% of total), with 1.93x step-count convergence speedup (1.64x wall-clock). N behaves as a parameter-sharing knob rather than a unique optimum: at 5.5M an N-sweep over {1,2,3,4,6,8,12} is near-monotone with N=1 winning; at 123M a three-seed sweep finds N=3 and N=1 statistically indistinguishable. The load-bearing mechanism is the channel-partitioned residual stream, per-block rotation, per-phase normalization, and horn DC injection. We characterize (a) self-stabilization of the geometry without explicit enforcement, a novel instance of the conservation-law framework for neural networks; (b) a U-shaped depth profile of rotation-angle drift at 12 layers; (c) orthogonal composition with RoPE, attention, and FFN.

Energy Dispersive X-ray (EDX) tomography in Scanning Transmission Electron Microscopy (STEM) enables 3D compositional and elemental mapping at the nanoscale, but its use is limited by restricted tilt ranges and low-dose conditions required to avoid beam damage. Limited-angle acquisition introduces missing-wedge artefacts such as elongation and anisotropic resolution, while noisy low-dose data further degrade reconstruction quality and quantitative reliability. Here, we introduce an unsupervised deep learning framework based on Deep Image Prior with total variation regularization (DIP-TV) for limited-angle STEM-EDX tomography. We extend it to a multi-channel formulation (DIPm-TV) that jointly reconstructs multiple elemental maps by exploiting spatial correlations. Using a synthetic 3-channel phantom, we show that the method compensates for severe missing-wedge artefacts corresponding to approximately 100^circ of missing angular range under moderate noise, outperforming simultaneous iterative reconstruction technique and compressed sensing approaches. We apply the method to 3D chemical analysis of Ge-Sb-Te (GST) memory devices in virgin (as-fabricated) and SET (crystalline) operational states. Samples were prepared as cross-sectional focused ion beam lamellae and acquired under a limited-angle tilt range from -40^circ to +40^circ with 5^circ steps and a dose of 2.0times10^5 e^-/Ang^2. The multi-channel approach enables voxel-by-voxel elemental reconstruction using only EDX signals without external structural priors such as high-angle annular dark-field imaging. The reconstructed volumes show near-isotropic spatial resolution and reveal compositional heterogeneities associated with device operation. This approach enables 3D chemical characterization in experimentally accessible sample geometries where conventional methods fail due to severe angular limitations.

As 5G technology becomes increasingly established, the anticipation for 6G is growing, which promises to deliver faster and more reliable wireless connections via cutting-edge radio technologies. However, efficient management method of the large-scale antenna arrays deployed by those radio technologies is crucial. Traditional management methods are mainly reactive, usually based on feedback from users to adapt to the dynamic wireless channel. However, a more promising approach lies in the prediction of spatial channel state information (spatial-CSI), which is an all-inclusive channel characterization and consists of all the feasible line-of-sight (LoS) and non-line-of-sight (NLoS) paths between the transmitter (Tx) and receiver (Rx), with the three-dimension (3D) trajectory, attenuation, phase shift, delay, and polarization of each path. Advances in hardware and neural networks make it possible to predict such spatial-CSI using precise environmental information, and further look into the possibility of holographic communication, which implies complete control over every aspect of the radio waves emitted. Based on the integration of holographic communication and digital twin, we proposed a new framework, digital radio twin, which takes advantages from both the digital world and deterministic control over radio waves, supporting a wide range of high-level applications. As a preliminary attempt towards this visionary direction, in this paper, we explore the use of generative artificial intelligence (AI) to pinpoint the valid paths in a given environment, demonstrating promising results, and highlighting the potential of this approach in driving forward the evolution of 6G wireless communication technologies.

The automatic classification of applications and services is an invaluable feature for new generation mobile networks. Here, we propose and validate algorithms to perform this task, at runtime, from the raw physical channel of an operative mobile network, without having to decode and/or decrypt the transmitted flows. Towards this, we decode Downlink Control Information (DCI) messages carried within the LTE Physical Downlink Control CHannel (PDCCH). DCI messages are sent by the radio cell in clear text and, in this paper, are utilized to classify the applications and services executed at the connected mobile terminals. Two datasets are collected through a large measurement campaign: one labeled, used to train the classification algorithms, and one unlabeled, collected from four radio cells in the metropolitan area of Barcelona, in Spain. Among other approaches, our Convolutional Neural Network (CNN) classifier provides the highest classification accuracy of 99%. The CNN classifier is then augmented with the capability of rejecting sessions whose patterns do not conform to those learned during the training phase, and is subsequently utilized to attain a fine grained decomposition of the traffic for the four monitored radio cells, in an online and unsupervised fashion.

The Athena mission entered a redefinition phase in July 2022, driven by the imperative to reduce the mission cost at completion for the European Space Agency below an acceptable target, while maintaining the flagship nature of its science return. This notably called for a complete redesign of the X-ray Integral Field Unit (X-IFU) cryogenic architecture towards a simpler active cooling chain. Passive cooling via successive radiative panels at spacecraft level is now used to provide a 50 K thermal environment to an X-IFU owned cryostat. 4.5 K cooling is achieved via a single remote active cryocooler unit, while a multi-stage Adiabatic Demagnetization Refrigerator ensures heat lift down to the 50 mK required by the detectors. Amidst these changes, the core concept of the readout chain remains robust, employing Transition Edge Sensor microcalorimeters and a SQUID-based Time-Division Multiplexing scheme. Noteworthy is the introduction of a slower pixel. This enables an increase in the multiplexing factor (from 34 to 48) without compromising the instrument energy resolution, hence keeping significant system margins to the new 4 eV resolution requirement. This allows reducing the number of channels by more than a factor two, and thus the resource demands on the system, while keeping a 4' field of view (compared to 5' before). In this article, we will give an overview of this new architecture, before detailing its anticipated performances. Finally, we will present the new X-IFU schedule, with its short term focus on demonstration activities towards a mission adoption in early 2027.

Online surgical phase recognition (SPR) underpins context-aware operating-room systems and requires committing to a prediction at every frame from past context alone. Surgical video poses three demands that natural-video recognizers do not jointly address: procedures span tens of thousands of frames, time flows non-uniformly as long routine stretches are punctuated by brief phase-defining transitions, and the visual domain is narrow so backbone features are strongly correlated across channels. Existing recognizers either let per-frame cost grow with elapsed length, or hold cost bounded but advance state at a uniform rate with channel-independent dynamics, leaving the latter two demands unaddressed. We present SurgicalMamba, a causal SPR model built on Mamba2's structured state-space duality (SSD) that holds per-frame cost at O(d). It introduces three SSD-compatible components, each targeting one demand: a dual-path SSD block that separates long- and short-term regimes at the level of recurrent state; intensity-modulated stepping, a continuous-time time-warp that adapts the slow path's effective rate to phase-relevant information; and state regramming, a per-chunk Cayley rotation that opens cross-channel mixing in the otherwise axis-aligned SSM recurrence. The learned rotation planes inherit a phase-aligned structure without any direct supervision, offering an interpretable internal signature of surgical workflow. Across seven public SPR benchmarks, SurgicalMamba reaches state-of-the-art accuracy and phase-level Jaccard under strict online evaluation: 94.6%/82.7% on Cholec80 (+0.7 pp/+2.2 pp over the strongest prior) and 89.5%/68.9% on AutoLaparo (+1.7 pp/+2.0 pp), at 119 fps on a single GPU. Ablations isolate the contribution of each component. The code is publicly available at https://github.com/sukjuoh/Surgical-Mamba.

The received in-phase and quadrature (I/Q) baseband signals inherently encode physical-layer and channel characteristics of wireless links. Learning robust and transferable representations directly from such raw signals, however, remains challenging due to heterogeneous communication systems, diverse propagation environments, and limited labeled data. To address this, we present LWM-Spectro, a transformer-based foundation model pretrained on large-scale I/Q data represented as time-frequency spectrograms. The model leverages self-supervised masked modeling, contrastive learning, and a mixture-of-experts (MoE) architecture to learn general-purpose wireless representations. These representations transfer effectively to downstream tasks such as modulation classification and joint SNR/mobility recognition, even with minimal supervision. Across tasks, LWM-Spectro consistently outperforms state-of-the-art deep learning baselines in both few-shot and data-rich regimes, providing a unified foundation for wireless learning.

We present AERO, a audio super-resolution model that processes speech and music signals in the spectral domain. AERO is based on an encoder-decoder architecture with U-Net like skip connections. We optimize the model using both time and frequency domain loss functions. Specifically, we consider a set of reconstruction losses together with perceptual ones in the form of adversarial and feature discriminator loss functions. To better handle phase information the proposed method operates over the complex-valued spectrogram using two separate channels. Unlike prior work which mainly considers low and high frequency concatenation for audio super-resolution, the proposed method directly predicts the full frequency range. We demonstrate high performance across a wide range of sample rates considering both speech and music. AERO outperforms the evaluated baselines considering Log-Spectral Distance, ViSQOL, and the subjective MUSHRA test. Audio samples and code are available at https://pages.cs.huji.ac.il/adiyoss-lab/aero

In this paper, we propose a convolutional recurrent neural network for joint sound event localization and detection (SELD) of multiple overlapping sound events in three-dimensional (3D) space. The proposed network takes a sequence of consecutive spectrogram time-frames as input and maps it to two outputs in parallel. As the first output, the sound event detection (SED) is performed as a multi-label classification task on each time-frame producing temporal activity for all the sound event classes. As the second output, localization is performed by estimating the 3D Cartesian coordinates of the direction-of-arrival (DOA) for each sound event class using multi-output regression. The proposed method is able to associate multiple DOAs with respective sound event labels and further track this association with respect to time. The proposed method uses separately the phase and magnitude component of the spectrogram calculated on each audio channel as the feature, thereby avoiding any method- and array-specific feature extraction. The method is evaluated on five Ambisonic and two circular array format datasets with different overlapping sound events in anechoic, reverberant and real-life scenarios. The proposed method is compared with two SED, three DOA estimation, and one SELD baselines. The results show that the proposed method is generic and applicable to any array structures, robust to unseen DOA values, reverberation, and low SNR scenarios. The proposed method achieved a consistently higher recall of the estimated number of DOAs across datasets in comparison to the best baseline. Additionally, this recall was observed to be significantly better than the best baseline method for a higher number of overlapping sound events.

Distinction of OFDM signals from single carrier signals is highly important for adaptive receiver algorithms and signal identification applications. OFDM signals exhibit Gaussian characteristics in time domain and fourth order cumulants of Gaussian distributed signals vanish in contrary to the cumulants of other signals. Thus fourth order cumulants can be utilized for OFDM signal identification. In this paper, first, formulations of the estimates of the fourth order cumulants for OFDM signals are provided. Then it is shown these estimates are affected significantly from the wireless channel impairments, frequency offset, phase offset and sampling mismatch. To overcome these problems, a general chi-square constant false alarm rate Gaussianity test which employs estimates of cumulants and their covariances is adapted to the specific case of wireless OFDM signals. Estimation of the covariance matrix of the fourth order cumulants are greatly simplified peculiar to the OFDM signals. A measurement setup is developed to analyze the performance of the identification method and for comparison purposes. A parametric measurement analysis is provided depending on modulation order, signal to noise ratio, number of symbols, and degree of freedom of the underlying test. The proposed method outperforms statistical tests which are based on fixed thresholds or empirical values, while a priori information requirement and complexity of the proposed method are lower than the coherent identification techniques.

Collaborative perception enhances sensing in multirobot and vehicular networks by fusing information from multiple agents, improving perception accuracy and sensing range. However, mobility and non-rigid sensor mounts introduce extrinsic calibration errors, necessitating online calibration, further complicated by limited overlap in sensing regions. Moreover, maintaining fresh information is crucial for timely and accurate sensing. To address calibration errors and ensure timely and accurate perception, we propose a robust task-oriented communication strategy to optimize online self-calibration and efficient feature sharing for Real-time Adaptive Collaborative Perception (R-ACP). Specifically, we first formulate an Age of Perceived Targets (AoPT) minimization problem to capture data timeliness of multi-view streaming. Then, in the calibration phase, we introduce a channel-aware self-calibration technique based on reidentification (Re-ID), which adaptively compresses key features according to channel capacities, effectively addressing calibration issues via spatial and temporal cross-camera correlations. In the streaming phase, we tackle the trade-off between bandwidth and inference accuracy by leveraging an Information Bottleneck (IB) based encoding method to adjust video compression rates based on task relevance, thereby reducing communication overhead and latency. Finally, we design a priority-aware network to filter corrupted features to mitigate performance degradation from packet corruption. Extensive studies demonstrate that our framework outperforms five baselines, improving multiple object detection accuracy (MODA) by 25.49% and reducing communication costs by 51.36% under severely poor channel conditions. Code will be made publicly available: github.com/fangzr/R-ACP.

Public power-system datasets often lack electromagnetic transient (EMT) waveforms, inverter control dynamics, and diverse disturbance coverage, which limits their usefulness for training surrogate models and studying cyber-physical behavior in inverter-based microgrids. This paper presents a high-fidelity digital twin dataset generated from a MATLAB/Simulink EMT model of a low-voltage AC microgrid with ten inverter-based distributed generators. The dataset records synchronized three-phase PCC voltages and currents, per-DG active power, reactive power, and frequency, together with embedded scenario labels, producing 38 aligned channels sampled at Δt = 2~μs over T = 1~s (N = 500{,}001 samples) per scenario. Eleven operating and disturbance scenarios are included: normal operation, load step, voltage sag (temporary three-phase fault), load ramp, frequency ramp, DG trip, tie-line trip, reactive power step, single-line-to-ground faults, measurement noise injection, and communication delay. To ensure numerical stability without altering sequence length, invalid samples (NaN, Inf, and extreme outliers) are repaired using linear interpolation. Each scenario is further validated using system-level evidence from mean frequency, PCC voltage magnitude, total active power, voltage unbalance, and zero-sequence current to confirm physical observability and correct timing. The resulting dataset provides a consistent, labeled EMT benchmark for surrogate modeling, disturbance classification, robustness testing under noise and delay, and cyber-physical resilience analysis in inverter-dominated microgrids. The dataset and processing scripts will be released upon acceptance

Holographic Metasurface Transceivers (HMTs) are emerging as cost-effective substitutes to large antenna arrays for beamforming in Millimeter and TeraHertz wave communication. However, to achieve desired channel gains through beamforming in HMT, phase-shifts of a large number of elements need to be appropriately set, which is challenging. Also, these optimal phase-shifts depend on the location of the receivers, which could be unknown. In this work, we develop a learning algorithm using a {\it fixed-budget multi-armed bandit framework} to beamform and maximize received signal strength at the receiver for far-field regions. Our algorithm, named \Algo exploits the parametric form of channel gains of the beams, which can be expressed in terms of two {\it phase-shifting parameters}. Even after parameterization, the problem is still challenging as phase-shifting parameters take continuous values. To overcome this, {\it\HB} works with the discrete values of phase-shifting parameters and exploits their unimodal relations with channel gains to learn the optimal values faster. We upper bound the probability of {\it\HB} incorrectly identifying the (discrete) optimal phase-shift parameters in terms of the number of pilots used in learning. We show that this probability decays exponentially with the number of pilot signals. We demonstrate that {\it\HB} outperforms state-of-the-art algorithms through extensive simulations.

Modulation classification (MC) is the first step performed at the receiver side unless the modulation type is explicitly indicated by the transmitter. Machine learning techniques have been widely used for MC recently. In this paper, we propose a novel MC technique dubbed as Joint Equalization and Modulation Classification based on Constellation Network (EMC2-Net). Unlike prior works that considered the constellation points as an image, the proposed EMC2-Net directly uses a set of 2D constellation points to perform MC. In order to obtain clear and concrete constellation despite multipath fading channels, the proposed EMC2-Net consists of equalizer and classifier having separate and explainable roles via novel three-phase training and noise-curriculum pretraining. Numerical results with linear modulation types under different channel models show that the proposed EMC2-Net achieves the performance of state-of-the-art MC techniques with significantly less complexity.

Deep learning has become an area of interest in most scientific areas, including physical sciences. Modern networks apply real-valued transformations on the data. Particularly, convolutions in convolutional neural networks discard phase information entirely. Many deterministic signals, such as seismic data or electrical signals, contain significant information in the phase of the signal. We explore complex-valued deep convolutional networks to leverage non-linear feature maps. Seismic data commonly has a lowcut filter applied, to attenuate noise from ocean waves and similar long wavelength contributions. Discarding the phase information leads to low-frequency aliasing analogous to the Nyquist-Shannon theorem for high frequencies. In non-stationary data, the phase content can stabilize training and improve the generalizability of neural networks. While it has been shown that phase content can be restored in deep neural networks, we show how including phase information in feature maps improves both training and inference from deterministic physical data. Furthermore, we show that the reduction of parameters in a complex network outperforms larger real-valued networks.

While deep learning has advanced speech enhancement (SE), effective phase modeling remains challenging, as conventional networks typically operate within a flat Euclidean feature space, which is not easy to model the underlying circular topology of the phase. To address this, we propose a manifold-aware magnitude-phase dual-stream framework that aligns the phase stream with its intrinsic circular geometry by enforcing Global Rotation Equivariance (GRE) characteristic. Specifically, we introduce a Magnitude-Phase Interactive Convolutional Module (MPICM) for modulus-based information exchange and a Hybrid-Attention Dual-FFN (HADF) bottleneck for unified feature fusion, both of which are designed to preserve GRE in the phase stream. Comprehensive evaluations are conducted across phase retrieval, denoising, dereverberation, and bandwidth extension tasks to validate the superiority of the proposed method over multiple advanced baselines. Notably, the proposed architecture reduces Phase Distance by over 20\% in the phase retrieval task and improves PESQ by more than 0.1 in zero-shot cross-corpus denoising evaluations. The overall superiority is also established in universal SE tasks involving mixed distortions. Qualitative analysis further reveals that the learned phase features exhibit distinct periodic patterns, which are consistent with the intrinsic circular nature of the phase. The source code is available at https://github.com/wangchengzhong/RENet.

Surgical workflow recognition has numerous potential medical applications, such as the automatic indexing of surgical video databases and the optimization of real-time operating room scheduling, among others. As a result, phase recognition has been studied in the context of several kinds of surgeries, such as cataract, neurological, and laparoscopic surgeries. In the literature, two types of features are typically used to perform this task: visual features and tool usage signals. However, the visual features used are mostly handcrafted. Furthermore, the tool usage signals are usually collected via a manual annotation process or by using additional equipment. In this paper, we propose a novel method for phase recognition that uses a convolutional neural network (CNN) to automatically learn features from cholecystectomy videos and that relies uniquely on visual information. In previous studies, it has been shown that the tool signals can provide valuable information in performing the phase recognition task. Thus, we present a novel CNN architecture, called EndoNet, that is designed to carry out the phase recognition and tool presence detection tasks in a multi-task manner. To the best of our knowledge, this is the first work proposing to use a CNN for multiple recognition tasks on laparoscopic videos. Extensive experimental comparisons to other methods show that EndoNet yields state-of-the-art results for both tasks.

Flow matching (FM) enables high-fidelity generation, while self-supervised learning (SSL) speech models provide hierarchical representations spanning acoustic and phonetic levels. However, existing FM-based speech enhancement (SE) methods operate primarily in the spectral domain, treating SSL features only as external conditions rather than modeling directly in the SSL latent space. To fully exploit the structural richness of SSL representations, we propose PhASE-Flow, an FM-based SE framework that operates entirely in the SSL space. It models the conditional distribution of clean acoustic representations given phonetic ones, reconstructing the waveform via a neural vocoder. Experiments show that PhASE-Flow outperforms state-of-the-art baselines in perceptual quality and intelligibility. Notably, it achieves competitive performance with only four sampling steps, enabling highly efficient inference. Audio demos are available at https://anonymous.4open.science/w/phase-flow_demo-E6E1/.

Music source separation in the time-frequency domain is commonly achieved by applying a soft or binary mask to the magnitude component of (complex) spectrograms. The phase component is usually not estimated, but instead copied from the mixture and applied to the magnitudes of the estimated isolated sources. While this method has several practical advantages, it imposes an upper bound on the performance of the system, where the estimated isolated sources inherently exhibit audible "phase artifacts". In this paper we address these shortcomings by directly estimating masks in the complex domain, extending recent work from the speech enhancement literature. The method is particularly well suited for multi-instrument musical source separation since residual phase artifacts are more pronounced for spectrally overlapping instrument sources, a common scenario in music. We show that complex masks result in better separation than masks that operate solely on the magnitude component.

Neural vocoders have recently advanced waveform generation, yielding natural and expressive audio. Among these approaches, iSTFT-based vocoders have recently gained attention. They predict a complex-valued spectrogram and then synthesize the waveform via iSTFT, thereby avoiding learned upsampling stages that can increase computational cost. However, current approaches use real-valued networks that process the real and imaginary parts independently. This separation limits their ability to capture the inherent structure of complex spectrograms. We present ComVo, a Complex-valued neural Vocoder whose generator and discriminator use native complex arithmetic. This enables an adversarial training framework that provides structured feedback in complex-valued representations. To guide phase transformations in a structured manner, we introduce phase quantization, which discretizes phase values and regularizes the training process. Finally, we propose a block-matrix computation scheme to improve training efficiency by reducing redundant operations. Experiments demonstrate that ComVo achieves higher synthesis quality than comparable real-valued baselines, and that its block-matrix scheme reduces training time by 25%. Audio samples and code are available at https://hs-oh-prml.github.io/ComVo/.

Speech bandwidth extension (BWE) has demonstrated promising performance in enhancing the perceptual speech quality in real communication systems. Most existing BWE researches primarily focus on fixed upsampling ratios, disregarding the fact that the effective bandwidth of captured audio may fluctuate frequently due to various capturing devices and transmission conditions. In this paper, we propose a novel streaming adaptive bandwidth extension solution dubbed BAE-Net, which is suitable to handle the low-resolution speech with unknown and varying effective bandwidth. To address the challenges of recovering both the high-frequency magnitude and phase speech content blindly, we devise a dual-stream architecture that incorporates the magnitude inpainting and phase refinement. For potential applications on edge devices, this paper also introduces BAE-NET-lite, which is a lightweight, streaming and efficient framework. Quantitative results demonstrate the superiority of BAE-Net in terms of both performance and computational efficiency when compared with existing state-of-the-art BWE methods.

Strategies for the generation of periodic discrete structures with identical two-point correlation are developed. Starting from a pair of root structures, which are not related by translation, phase inversion or axis reflections, child structures of arbitrary resolution (i.e., pixel or voxel numbers) and number of phases (i.e., material phases/species) can be generated by means of trivial embedding based phase extension, application of kernels and/or phase coalescence, such that the generated structures inherit the two-point-correlation equivalence. Proofs of the inheritance property are provided by means of the Discrete Fourier Transform theory. A Python 3 implementation of the results is offered by the authors through the Github repository https://github.com/DataAnalyticsEngineering/EQ2PC in order to make the provided results reproducible and useful for all interested readers. Examples for the generation of structures are demonstrated, together with applications in the homogenization theory of periodic media.

Classification between different activities in an indoor environment using wireless signals is an emerging technology for various applications, including intrusion detection, patient care, and smart home. Researchers have shown different methods to classify activities and their potential benefits by utilizing WiFi signals. In this paper, we analyze classification of moving objects by employing machine learning on real data from a massive multi-input-multi-output (MIMO) system in an indoor environment. We conduct measurements for different activities in both line-of-sight and non line-of-sight scenarios with a massive MIMO testbed operating at 3.7 GHz. We propose algorithms to exploit amplitude and phase-based features classification task. For the considered setup, we benchmark the classification performance and show that we can achieve up to 98% accuracy using real massive MIMO data, even with a small number of experiments. Furthermore, we demonstrate the gain in performance results with a massive MIMO system as compared with that of a limited number of antennas such as in WiFi devices.

We introduce a novel deep reinforcement learning (DRL) approach to jointly optimize transmit beamforming and reconfigurable intelligent surface (RIS) phase shifts in a multiuser multiple input single output (MU-MISO) system to maximize the sum downlink rate under the phase-dependent reflection amplitude model. Our approach addresses the challenge of imperfect channel state information (CSI) and hardware impairments by considering a practical RIS amplitude model. We compare the performance of our approach against a vanilla DRL agent in two scenarios: perfect CSI and phase-dependent RIS amplitudes, and mismatched CSI and ideal RIS reflections. The results demonstrate that the proposed framework significantly outperforms the vanilla DRL agent under mismatch and approaches the golden standard. Our contributions include modifications to the DRL approach to address the joint design of transmit beamforming and phase shifts and the phase-dependent amplitude model. To the best of our knowledge, our method is the first DRL-based approach for the phase-dependent reflection amplitude model in RIS-aided MU-MISO systems. Our findings in this study highlight the potential of our approach as a promising solution to overcome hardware impairments in RIS-aided wireless communication systems.