Daily Papers

Reordering multiple-choice options can change a model's answer, an effect studied as selection bias (a preference for certain option letters) and as order sensitivity (changes in answers across option orderings). We connect these perspectives through the pooled selection-rate standard deviation (pooled SD), which measures how unevenly option letters are selected across questions and orderings. When every option of each question appears equally often at each position, the pooled SD is exactly the product of two label-free factors: the flip rate and the positional skew. The flip rate is the fraction of questions whose chosen option changes across orderings; the positional skew is the standard deviation of option-letter selection rates among those questions. Across 41 checkpoints and 12 benchmarks, the flip rate tracks accuracy and output uncertainty, while the positional skew tracks the estimated option-symbol prior. Prior correction for selection bias mainly reduces the positional skew. Aggregating each ordering with its reversal, a mitigation for order sensitivity, mainly reduces the flip rate. Both reduce the range of accuracy across correct-answer letters by similar amounts, but aggregation leaves fewer model-rank reversals. Applying prior correction before aggregation reduces both factors and further narrows this accuracy range. However, aggregation lowers the flip rate partly by settling questions on the same wrong option. We therefore recommend reporting both factors to distinguish mitigation effects, alongside accuracy to distinguish stability from correctness.

Coding-agent benchmarks are built for broad and comprehensive comparisons, not frequent development decisions. Individual runs vary, full suites are expensive, and the benchmark harness may differ from the harness used in practice. In a resampling analysis of DeepSWE's published trials, only 19.5% of tasks (22 of 113) had a fifth-percentile Pearson correlation of at least 0.50 with full-benchmark performance. The paper presents DeltaSelect, an open-source method that identifies tasks whose one-run results consistently track full-benchmark performance using Pearson correlation, maps fractional verifier results to a common score using linear regression, and selects a fixed task set within a dollar budget. DeltaSelect is intended for repeated baseline-versus-candidate comparisons during development, not model rankings. In a gpt-5.6-luna low-reasoning case study, DeltaSelect was used to revise custom skills and instructions. Across 13 evaluations, the recorded cost was USD 27.86 at rates published August 16, 2026. The adopted version cost 58.1% less than the initial version (USD 1.75 versus USD 4.18; p=0.008), while the calibrated score was higher (42.36% versus 36.46%; published-analog variance p=0.326).

Benchmarks of machine learning models often include many datasets, making evaluation expensive. For efficiency, it is preferable to perform evaluations on small, representative datasets instead. The selection of such subsets typically relies on heuristics and is rarely analyzed for the robustness of the resulting model rankings. We introduce a framework to perform the task of selecting datasets subsets with an evaluation of how different selection strategies preserve the global model rankings. Our framework includes bootstrap aggregation, which provides valid confidence intervals, allowing a principled comparison of selection strategies. We consider clustering, design criteria (A/D-optimality), random baselines, and greedy farthest-first (FAFI). For the latter, we derive upper bounds on selection quality in terms of ranking errors as a function of the number of selected datasets. Empirically, in time series classification (TSC, 112 datasets) and in a supplementary natural language processing benchmark derived from MTEB (57 tasks), several selection strategies improve rank preservation compared with random subsets, including simple FAFI. In contrast, in recommender systems (30 datasets), the improvement of strategies over random selection is small and typically statistically insignificant. For TSC, our best-performing strategy achieves a Spearman correlation of 0.95 with the full benchmark model rankings using only five selected datasets. Additional experiments indicate that the effectiveness of selection approaches depends on both the quality of dataset representations and the scale of the benchmarking regime.

Human evaluation is the gold-standard for evaluating text generation models. It is also expensive, and to fit budgetary constraints, a random subset of the test data is often chosen in practice. The randomly selected data may not accurately represent test performance, making this approach economically inefficient for model comparison. Thus, in this work, we develop a suite of selectors to get the most informative datapoints for human evaluation while taking the evaluation costs into account. We show that selectors based on variance in automated metric scores, diversity in model outputs, or Item Response Theory outperform random selection. We further develop an approach to distill these selectors to the scenario where the model outputs are not yet available. In particular, we introduce source-based estimators, which predict item usefulness for human evaluation just based on the source texts. We demonstrate the efficacy of our selectors in two common NLG tasks, machine translation and summarization, and show that up to only ~50% of the test data is needed to produce the same evaluation result as the entire data. Our implementations are published in the subset2evaluate package.

Conformal prediction is often calibrated with a single pooled threshold, but this can hide cross-group heterogeneity in score distributions and distort group-wise coverage. We study this phenomenon through the population score distributions underlying split conformal calibration. First, we derive a conservation law and lower bound showing that pooled calibration incurs irreducible group-wise coverage distortion at a scale set by cross-group quantile heterogeneity. Second, we demonstrate that the two leading fairness definitions for conformal prediction, Equalized Coverage and Equalized Set Size, are fundamentally in tension. Third, we quantify the cost of moving between policies which treat groups separately or pool them. Experiments on synthetic and real data confirm the same bidirectional trade-off after finite-sample calibration. Our results show that, for the policy families studied here, calibration choice does not remove cross-group heterogeneity; it determines whether the resulting distortion appears in the coverage or size dimension, providing a principled lens for analyzing fairness-oriented calibration choices in practice.

Should prediction models always deliver a prediction? In the pursuit of maximum predictive performance, critical considerations of reliability and fairness are often overshadowed, particularly when it comes to the role of uncertainty. Selective regression, also known as the "reject option," allows models to abstain from predictions in cases of considerable uncertainty. Initially proposed seven decades ago, approaches to selective regression have mostly focused on distribution-based proxies for measuring uncertainty, particularly conditional variance. However, this focus neglects the significant influence of model-specific biases on a model's performance. In this paper, we propose a novel approach to selective regression by leveraging conformal prediction, which provides grounded confidence measures for individual predictions based on model-specific biases. In addition, we propose a standardized evaluation framework to allow proper comparison of selective regression approaches. Via an extensive experimental approach, we demonstrate how our proposed approach, conformalized selective regression, demonstrates an advantage over multiple state-of-the-art baselines.

Three of the most popular methods for training language models to reason look like three different tricks. They are not. All three adjust a single number: standard deviation, reflecting how much a prompt's sampled answers disagree. When such a model is trained, it answers each problem many times, and an automatic checker marks every answer right or wrong. The standard deviation of those marks measures the disagreement: largest when the answers split evenly between right and wrong, and zero when they all agree. Group Relative Policy Optimization (GRPO) divides by this number, GRPO Done Right (Dr. GRPO) drops the division, and Decoupled Clip and Dynamic Sampling Policy Optimization (DAPO) discards the groups where it is zero. Each is presented as its own fix, yet this paper proves they are three settings of one dial. That dial is not cosmetic: for right-or-wrong rewards, the disagreement is exactly the size of the training update, the group-standard-deviation identity. A split group teaches the most, while a unanimous group teaches nothing and falls silent. The same result says which problems deserve the most weight and how many tries each one needs. This paper confirms the intuition on a large real difficulty dataset (Big-Math) and in a controlled training run. What looks like a harmless normalization step is the dial that decides where learning happens and how strongly.

Client selection strategies are widely adopted to handle the communication-efficient problem in recent studies of Federated Learning (FL). However, due to the large variance of the selected subset's update, prior selection approaches with a limited sampling ratio cannot perform well on convergence and accuracy in heterogeneous FL. To address this problem, in this paper, we propose a novel stratified client selection scheme to reduce the variance for the pursuit of better convergence and higher accuracy. Specifically, to mitigate the impact of heterogeneity, we develop stratification based on clients' local data distribution to derive approximate homogeneous strata for better selection in each stratum. Concentrating on a limited sampling ratio scenario, we next present an optimized sample size allocation scheme by considering the diversity of stratum's variability, with the promise of further variance reduction. Theoretically, we elaborate the explicit relation among different selection schemes with regard to variance, under heterogeneous settings, we demonstrate the effectiveness of our selection scheme. Experimental results confirm that our approach not only allows for better performance relative to state-of-the-art methods but also is compatible with prevalent FL algorithms.

Evaluating modern machine learning models has become prohibitively expensive. Benchmarks such as LMMs-Eval and HELM demand thousands of GPU hours per model. Costly evaluation reduces inclusivity, slows the cycle of innovation, and worsens environmental impact. The typical approach follows two steps. First, select an anchor subset of data. Second, train a mapping from the accuracy on this subset to the final test result. The drawback is that anchor selection depends on clustering, which can be complex and sensitive to design choices. We argue that promoting diversity among samples is not essential; what matters is to select samples that maximise diversity in model responses. Our method, Diversifying Sample Condensation (DISCO), selects the top-k samples with the greatest model disagreements. This uses greedy, sample-wise statistics rather than global clustering. The approach is conceptually simpler. From a theoretical view, inter-model disagreement provides an information-theoretically optimal rule for such greedy selection. DISCO shows empirical gains over prior methods, achieving state-of-the-art results in performance prediction across MMLU, Hellaswag, Winogrande, and ARC. Code is available here: https://github.com/arubique/disco-public.

Some security-development settings require local models that map an objective to an ordered, checkable plan. We present a low-rank decomposition adapter and release a case-disjoint corpus with 24 authored decompositions and 83 derived next-step examples across 24 satellite-security cases. To prevent reference-plan leakage, prompts contain one objective and eight shuffled SPARTA candidates. The evaluation candidate sets are constructed with oracle inclusion of every reference technique, so this study measures selection from a controlled set, not retrieval. On six fixed cases and five decoding seeds, mean scores vary across adapters and prompted Qwen2.5 baselines; a separate greedy check over three adapter training seeds shows non-negligible training variance. A 24-fold greedy leave-one-case-out control at the two compact sizes likewise shows tradeoffs: at 1.5B, adapter precision is 0.583 against 0.480 for two-shot prompting, while recall is 0.586 against 0.660. Case-resampling intervals for adapter precision relative to the strongest prompted baseline cross zero at 1.5B and 7B. The adapter is also substantially more format-compliant, which prevents attributing all score differences to selection. Autoregressive next-step accuracy is 0.08, 0.06, and 0.29 at 0.5B, 1.5B, and 7B. We therefore offer the formulation, leakage-controlled dataset, reproducibility package, and descriptive analysis as a proof of concept, not evidence of a reliable stand-alone decomposition system or a general adapter advantage. A separate diagnostic tests contract reuse.

Feature Selection (FS) under domain adaptation (DA) is a critical task in machine learning, especially when dealing with limited target data. However, existing methods lack the capability to guarantee the reliability of FS under DA. In this paper, we introduce a novel statistical method to statistically test FS reliability under DA, named SFS-DA (statistical FS-DA). The key strength of SFS-DA lies in its ability to control the false positive rate (FPR) below a pre-specified level alpha (e.g., 0.05) while maximizing the true positive rate. Compared to the literature on statistical FS, SFS-DA presents a unique challenge in addressing the effect of DA to ensure the validity of the inference on FS results. We overcome this challenge by leveraging the Selective Inference (SI) framework. Specifically, by carefully examining the FS process under DA whose operations can be characterized by linear and quadratic inequalities, we prove that achieving FPR control in SFS-DA is indeed possible. Furthermore, we enhance the true detection rate by introducing a more strategic approach. Experiments conducted on both synthetic and real-world datasets robustly support our theoretical results, showcasing the superior performance of the proposed SFS-DA method.

On-policy self-distillation (OPSD) trains mathematical reasoning models using a privileged teacher that sees a reference solution and supervises student-sampled prefixes. Standard OPSD uses one fixed parameter setting at every state, but nearby settings may offer additional supervision. We find that local parameter perturbations reveal complementary reference-aligned corrections under the same reference context. Different experts supply these corrections at different reference positions. Their pool covers more such positions than the unperturbed privileged teacher. We introduce Neighborhood OPSD (N-OPSD) to turn these corrections into supervision at student-visited states. Offline, greedy selection builds a compact pool of frozen experts by rewarding filtered reference-token gains beyond the pool's current best at each position. The highest-peak expert need not provide the best training target. Online routing therefore separates the anchor direction from its level of support. MaxPeak selects the anchor token, and quantile selection chooses among experts whose top token matches it. The student learns from the chosen expert's full next-token distribution through the clipped forward-KL objective inherited from OPSD. We evaluate on AIME 2024, AIME 2025, and HMMT February 2025. Across three independent runs per method, Neighborhood OPSD improves the three-benchmark Average@12 over OPSD by 2.75, 1.67, and 1.94 points on Qwen3-1.7B, 4B, and 8B, respectively. Student-prefix continuations support using the pool beyond the reference trajectories used for selection. Matched ablations support filtered reference-token gains as a selection criterion. Accounting for overlap within the pool and routing by state further improve student accuracy. Inference uses only the distilled student.

We study the problem of approximating stationary points of Lipschitz and smooth functions under (varepsilon,delta)-differential privacy (DP) in both the finite-sum and stochastic settings. A point w is called an alpha-stationary point of a function F:R^drightarrowR if |nabla F(w)|leq alpha. We provide a new efficient algorithm that finds an Obig(big[sqrt{d}{nvarepsilon}big]^{2/3}big)-stationary point in the finite-sum setting, where n is the number of samples. This improves on the previous best rate of Obig(big[sqrt{d}{nvarepsilon}big]^{1/2}big). We also give a new construction that improves over the existing rates in the stochastic optimization setting, where the goal is to find approximate stationary points of the population risk. Our construction finds a Obig(1{n^{1/3}} + big[sqrt{d}{nvarepsilon}big]^{1/2}big)-stationary point of the population risk in time linear in n. Furthermore, under the additional assumption of convexity, we completely characterize the sample complexity of finding stationary points of the population risk (up to polylog factors) and show that the optimal rate on population stationarity is tilde Thetabig(1{n}+sqrt{d}{nvarepsilon}big). Finally, we show that our methods can be used to provide dimension-independent rates of Obig(1{n}+minbig(big[sqrt{rank}{nvarepsilon}big]^{2/3},1{(nvarepsilon)^{2/5}}big)big) on population stationarity for Generalized Linear Models (GLM), where rank is the rank of the design matrix, which improves upon the previous best known rate.

Preference distillation typically treats a teacher response as preferred and the student's own response as rejected. This assumes that self-generated failures are the most informative negatives and that rejects must come from a model at least as large as the student, making generation costly at scale. We find neither assumption holds: across students from 7B to 72B, smaller frozen models generate rejects with less inference compute yet train stronger students than self-generated rejects, before and after sequence-level knowledge distillation, on code generation and mathematical reasoning. To explain this result, we derive a finite-horizon utility bound for Direct Preference Optimization in a linearized feature model. The bound characterizes favorable reject distributions and motivates three interventions. First, mixing rejects from smaller and student-scale models improves performance as the smaller model's share increases. Second, reassigning rejects to other prompts and shuffling their code tokens still outperform length-matched gibberish, showing that task structure contributes to reject utility. Third, selecting candidates with lower likelihood under the reference policy improves net transfer when higher-likelihood candidates provide less useful contrast. Lower-likelihood selections outperform higher-likelihood ones for every source. These results suggest that effective rejects preserve task structure while limiting coupling to the reference policy, and that smaller frozen models can provide them at low cost.

Selecting high-quality training data from a larger pool is a crucial step when instruction-tuning language models, as carefully curated datasets often produce models that outperform those trained on much larger, noisier datasets. Automated data selection approaches for instruction-tuning are typically tested by selecting small datasets (roughly 10k samples) from small pools (100-200k samples). However, popular deployed instruction-tuned models often train on hundreds of thousands to millions of samples, subsampled from even larger data pools. We present a systematic study of how well data selection methods scale to these settings, selecting up to 2.5M samples from pools of up to 5.8M samples and evaluating across 7 diverse tasks. We show that many recently proposed methods fall short of random selection in this setting (while using more compute), and even decline in performance when given access to larger pools of data to select over. However, we find that a variant of representation-based data selection (RDS+), which uses weighted mean pooling of pretrained LM hidden states, consistently outperforms more complex methods across all settings tested -- all whilst being more compute-efficient. Our findings highlight that the scaling properties of proposed automated selection methods should be more closely examined. We release our code, data, and models at https://github.com/hamishivi/automated-instruction-selection.

Data policies for reinforcement learning with verifiable rewards (RLVR) determine which rollouts are used, how strongly they are weighted, and which domains contribute to subsequent training batches. We introduce DataFlex-RL, an evaluation platform for comparing these choices under a common GRPO recipe. Our primary experiment evaluates 13 configurations across 12 matched seeds using Qwen2.5-7B-Base and 12 mathematics, logic, and science benchmarks. Uniform GRPO improves the domain-balanced average accuracy by 7.76 percentage points over the untrained checkpoint. None of the eight rollout-selection or reweighting methods achieves a paired 95% confidence interval that excludes zero relative to uniform sampling, and none of the three adaptive mixtures outperforms a fixed equal mixture at the same level of precision. A corrected 12-seed extension on Llama-3.1-8B-Base places the additional methods on the same score scale as the original controls, but does not reveal a consistent winner in terms of observed mean performance. We also quantify evaluation sensitivity by rescoring nine Qwen2.5-7B-Instruct runs using a math-heavy six-benchmark summary, consisting of five mathematics benchmarks and GPQA-Diamond but no logic benchmark, and comparing it with the domain-balanced 12-benchmark summary. The resulting rankings are negatively correlated, with a correlation coefficient of -0.33, whereas summaries that retain all 12 benchmarks largely agree. Across the controlled settings studied here, changing the data policy measurably changes the training process but does not produce a reproducible improvement over uniform training.

Fine-tuning a large language model on new data degrades what it previously learned. We present Omega-S, a drop-in penalty computed from the weight matrix alone: it needs no previous-task data, no Fisher matrix and no stored copy of the old weights. It is three lines in an existing training loop and adds under 4% to the cost of a step. Retention. On Llama-3-8B with LoRA, fine-tuned from code to prose and measured by HumanEval over ten seeds, Omega-S retains more of the original capability than no regularisation on 9 of 10 seeds (0.173 -> 0.238 absolute pass@1; sign test one-sided p=0.011, Wilcoxon p=0.006), as a retention ratio, 62.9% -> 84.1%. It also beats tuned weight decay on 10 of 10 seeds (p=0.002) and tuned EWC on 8 of 10 (p=0.014), every arm re-measured in the same session. Mechanism, measured rather than asserted. Omega-S is topological by construction, its objective built from Tr(A^3), but we measured which of its four factors actually moves and three do not: their elasticity with respect to the weights is at or below 1e-4, against 9e-3 for the degree-variance term. As implemented, the composite reduces to a penalty on the variance of node degrees, which means row magnitude in square modules and directional alignment in non-square ones. We report this because a method whose name promises one thing and whose gradient does another should say so. We also enumerate the open design choices, including a contrast-preserving construction that does what it was designed to do and makes retention worse on all ten seeds. Repeating an identical configuration, same seed and same hardware, gives a standard deviation of 0.104 in retention ratio. We have not found this quantified for low-rank fine-tuning of language models, and it bounds every seed-paired comparison in this literature, ours included. Code, per-seed results and the full record of negative results are available.

Which forms of test-time compute improve the predictions of strong pretrained tabular foundation models (TFMs)? We systematically study this along three axes: adaptation, aggregation, and context construction. Our evaluation spans modern TFMs across the TabArena benchmark, supplemented by experiments on wide and large-scale tables from OpenML. For adaptation, we introduce DiagScale, a diagonal query-key similarity update. It trains only 0.003-0.03% of model parameters and achieves gains comparable to full fine-tuning across three independently pretrained backbones. For aggregation, both pool composition and selection strategy matter. TabPFN-3 already averages predictions from different preprocessing variants of the same data, and adding more such predictions yields diminishing returns. With a broader pool of 96 configurations, greedy selection reduces error by 2.4% relative to the default predictor, but uniform averaging increases error. For context construction, attention-guided retrieval improves TabPFN-3's predictions on some large tables and supports source pools beyond the full context memory limit. The context expansion methods we test yield no consistent improvement. Taken together, our results suggest that adaptation and selective aggregation yield consistent benchmark-level gains. The benefits of context construction depend more on the task and data regime. Adaptation and aggregation over the same backbone yield further gains when combined, but require substantially more computation than default inference. These trade-offs motivate choosing strategies according to the available computation budget. Code is available at https://github.com/kanghui-learning/test-time-compute-for-tabular-foundation-models.

Personalized treatment effect estimates are often of interest in high-stakes applications -- thus, before deploying a model estimating such effects in practice, one needs to be sure that the best candidate from the ever-growing machine learning toolbox for this task was chosen. Unfortunately, due to the absence of counterfactual information in practice, it is usually not possible to rely on standard validation metrics for doing so, leading to a well-known model selection dilemma in the treatment effect estimation literature. While some solutions have recently been investigated, systematic understanding of the strengths and weaknesses of different model selection criteria is still lacking. In this paper, instead of attempting to declare a global `winner', we therefore empirically investigate success- and failure modes of different selection criteria. We highlight that there is a complex interplay between selection strategies, candidate estimators and the data used for comparing them, and provide interesting insights into the relative (dis)advantages of different criteria alongside desiderata for the design of further illuminating empirical studies in this context.

Sparse on-policy distillation (OPD) allocates teacher supervision to a small subset of tokens in student-generated trajectories. However, useful teacher guidance can yield a noisy update when its gradient is estimated from a sampled next token. We study this estimation problem at a fixed prefix in information geometry and propose an information-efficiency ratio (IER) based on a signal-to-noise decomposition. IER characterizes relative gradient estimation error under an optimal scalar baseline. A candidate-set approximation enables token selection based on IER and its combination with existing usefulness scores, while retaining the sampled reverse-KL training objective. On mathematical and medical reasoning tasks, adding IER improves existing selectors in multiple settings, with sparse configurations matching or exceeding full OPD without token selection at small token budgets of 0.1\%--1\%. These results support accounting for both usefulness and gradient-estimation reliability when allocating sparse supervision. Our code is available at https://github.com/BruceSheng1202/IER-OPD.

Radiology report generation (RRG) is commonly formulated as a single-path generation task, where a multimodal large language model (MLLM) produces one decoded report as the final output. While recent progress has largely been driven by scaling training data, model capacity, and retrieval mechanisms, improving report quality at inference time remains underexplored. In this work, we observe that fixed radiology MLLMs often generate clinically stronger reports elsewhere in their candidate pool than the one selected by default decoding, suggesting that inference-time decision making remains an overlooked bottleneck. To address this, we propose Clinical Consensus Selection (CCS), a decoder-agnostic inference-time selection framework that samples multiple candidate reports and selects the one with the highest clinical consensus across the rollout pool. CCS unifies text-based utilities with a radiology-adapted utility computed by an image--report-trained multimodal embedder, which measures candidate agreement beyond surface-level textual similarity. Across three datasets and multiple radiology MLLMs, CCS consistently improves inference-time performance over single-path decoding and generic Best-of-N baselines, with particularly clear gains on clinical metrics. Further analysis shows that image-grounded utility forms a selection axis distinct from textual consensus and that substantial headroom remains for improving RRG at inference time.

Many applications involve estimating the mean of multiple binomial outcomes as a common problem -- assessing intergenerational mobility of census tracts, estimating prevalence of infectious diseases across countries, and measuring click-through rates for different demographic groups. The most standard approach is to report the plain average of each outcome. Despite simplicity, the estimates are noisy when the sample sizes or mean parameters are small. In contrast, the Empirical Bayes (EB) methods are able to boost the average accuracy by borrowing information across tasks. Nevertheless, the EB methods require a Bayesian model where the parameters are sampled from a prior distribution which, unlike the commonly-studied Gaussian case, is unidentified due to discreteness of binomial measurements. Even if the prior distribution is known, the computation is difficult when the sample sizes are heterogeneous as there is no simple joint conjugate prior for the sample size and mean parameter. In this paper, we consider the compound decision framework which treats the sample size and mean parameters as fixed quantities. We develop an approximate Stein's Unbiased Risk Estimator (SURE) for the average mean squared error given any class of estimators. For a class of machine learning-assisted linear shrinkage estimators, we establish asymptotic optimality, regret bounds, and valid inference. Unlike existing work, we work with the binomials directly without resorting to Gaussian approximations. This allows us to work with small sample sizes and/or mean parameters in both one-sample and two-sample settings. We demonstrate our approach using three datasets on firm discrimination, education outcomes, and innovation rates.

Benchmarks for scientific artificial intelligence are mostly written to be scored: multiple-choice questions, curated agent tasks with reference solutions, or simulators with a known generative structure. Real scientific requests arrive differently. They are underspecified, they carry attachments, and lack ground truth. We report K-Bench 01, an evaluation built from first-turn requests sampled from live user traffic on K-Dense Web and run end to end by nine frontier models in identical sandboxes, yielding 1,602 completed agent runs. Three blinded language-model judges scored every run against an eight-dimension rubric. On a rubric whose 8-anchor instructs judges that a domain scientist would accept the work with minor edits, no model clears the line under all three judges. gpt-5.6-sol has the highest pooled mean, 8.04, but its 95% interval [7.80, 8.23] spans the threshold, and two of the three judges rank claude-opus-5 first instead. We therefore report the ordering of systems as the reproducible quantity, the absolute level as an attribute of the instrument, and the top of the table as unresolved. Across all 39,934 scored judgments -- the eight dimension scores plus a holistic overall for each assessment, excluding not-applicable cells -- 47.6% fall below the 8-point threshold. Difficulty is not uniform across the rubric: scientific accuracy averages 6.22 against 7.33 for communication, on identical denominators and in the same direction within every one of the nine models. The single leading failure tag is overclaiming, on 31.4% of assessments. We argue that the informative quantity for scientific agents is not a leaderboard position but the joint distribution of what was delivered, what was claimed, and what artifacts were produced.

We consider the task of evaluating policies of algorithmic resource allocation through randomized controlled trials (RCTs). Such policies are tasked with optimizing the utilization of limited intervention resources, with the goal of maximizing the benefits derived. Evaluation of such allocation policies through RCTs proves difficult, notwithstanding the scale of the trial, because the individuals' outcomes are inextricably interlinked through resource constraints controlling the policy decisions. Our key contribution is to present a new estimator leveraging our proposed novel concept, that involves retrospective reshuffling of participants across experimental arms at the end of an RCT. We identify conditions under which such reassignments are permissible and can be leveraged to construct counterfactual trials, whose outcomes can be accurately ascertained, for free. We prove theoretically that such an estimator is more accurate than common estimators based on sample means -- we show that it returns an unbiased estimate and simultaneously reduces variance. We demonstrate the value of our approach through empirical experiments on synthetic, semi-synthetic as well as real case study data and show improved estimation accuracy across the board.

Per-field accept/review with selective risk at most alpha -- accept a field only if the error rate among accepted fields is controlled -- is the trust contract document-extraction systems need, and the natural procedure silently violates it on real documents. On 13,859 genuine claude-sonnet-5 fields from 800 CORD receipts (49.0% correct) we diagnose three failure modes: document clustering (design effect 1.84-2.45), score-refit leakage (coverage 0.416 at risk 0.127, violating alpha=0.10 in 95% of splits), and a tie-mass pathology (a degenerate score collapses the threshold grid, 0.030 to 0.001). We organize the fixes as a validity ladder, guarantee form stated per tier. A fit/val split protocol restores expected-selective-risk control for a learned fusion: coverage 0.318 at risk 0.096 at nominal alpha=0.10, no tolerance band (production variant 0.326) -- an on-average point whose realized risk exceeds alpha in 47.5% of resplits, not a certificate. Mondrian Learn-then-Test with exact binomial tails yields per-group PAC certificates: field-iid 0.171 at risk 0.068, cluster-corrected 0.140, doc-iid 0.060 -- the only tier matching documents, honestly near-vacuous today. Support-bin, the pre-specified provenance taxonomy, wins every rigor tier on the sonnet CORD capture (p<1e-4, Bonferroni-corrected) -- a win that does not replicate on the same documents under haiku or qwen -- while on higher-accuracy corpora pooled thresholds win: conditioning helps exactly where pooled cannot certify, subsumed by a learned score elsewhere. A frozen-configuration confirmation on selection-untouched claude-haiku-4-5 held at both risk levels, and a blind three-annotator human-gold audit verifies the practical tier's accepted-set risk at 1.3% against its 10% budget (Fleiss' kappa=0.83; labels err one-sidedly pessimistic). Released Apache-2.0 with seed-pinned, regression-gated procedures.

On-policy distillation (OPD) trains students using teacher feedback on their own sampled responses, yet how prompt choice shapes transfer across teacher-student pairs remains poorly understood. We systematically study prompt quantity, source, and selection across RL- and SFT-continuation pairs and cross-model settings. We find that OPD can be highly prompt-efficient: a few prompts can approach large-pool performance, with four DAPO prompts matching the observed mathematics score of 3,840 DeepMath prompts. However, prompt utility is relational rather than intrinsic: changing only the teacher can reverse the relative effectiveness of mathematics and code prompts. To characterize these transfer differences, we analyze parameter and functional changes across prompt supports and model pairs. Functional alignment with the teacher varies across supports and target tasks; in continuation pairs, teacher-aligned prediction changes can coexist with weak parameter alignment. Continued OPD on effective supports can restore performance after unfavorable transfer. Finally, targeted selection does not consistently outperform uniform random sampling, and filtering out a source that performs poorly alone yields no consistent gain across three paired support draws. Overall, our results distinguish prompt efficiency from prompt interchangeability and show that effective data choice depends on the teacher-student pair and target capability, with random sampling providing a competitive baseline in the studied settings.

Video temporal grounding supports applications such as video search, content review, and automated editing by localizing events described in natural language. Yet existing generative models typically output timestamps without explicit interval-level confidence scores to guide candidate selection. We separate candidate generation from acceptance by scoring individual intervals within the original decoding pass. A lightweight confidence head reads pooled decoder states, providing an explicit score trained for interval selection. Offline verifier scores supervise the head on fixed candidate sequences, and temporal-overlap labels adapt it to current rollouts during reinforcement learning. GT-anchored candidate-pool supervision and set-level optimization train the generator. The resulting scores support ranking, threshold-based selection, and rejection without invoking an external verifier at inference. On a fixed OMTG-Bench candidate pool, confidence raises query-macro Recall@0.5 from 9.95% to 14.42% over generation order at a 10% global return budget, and from 26.48% to 31.12% at a 25% budget. The continuous scores let downstream applications adjust return budgets or acceptance thresholds to match their precision-recall preferences, without regenerating candidate intervals.

A pooling mechanism is essential for mean opinion score (MOS) prediction, facilitating the transformation of variable-length audio features into a concise fixed-size representation that effectively encodes speech quality. Existing pooling methods typically operate at a singular granularity, concentrating either on a comprehensive global perspective or a detailed frame-level analysis, which may overlook complementary perceptual insights. To address this limitation, we introduce the Dual-Resolution Attentive Statistics Pooling (DRASP) framework. DRASP integrates both coarse-grained, global statistical summaries and fine-grained, attentive analyses of perceptually significant segments. This dual-view architecture empowers our model to formulate a more thorough and robust representation, capturing both the overarching structural context and salient local details concurrently. Extensive experiments validate the effectiveness and strong generalization ability of the proposed framework. It consistently outperforms various baseline methods across diverse datasets (MusicEval and AES-Natural), MOS prediction backbones (including a CLAP-based model and AudioBox-Aesthetics), and different audio generation systems, achieving a relative improvement of 10.39% in system-level Spearman's rank correlation coefficient (SRCC) over the widely-used average pooling approach.

Sequential trial emulation (STE) estimates the effect of a sustained treatment by stacking nested emulated trials with inverse-probability weighting. Additive-hazards STE estimators of the marginal risk difference recommend the nonparametric bootstrap without evaluating its coverage. Using a correctly-specifiable mechanism (up to a small, disclosed residual), we compare analytic and bootstrap standard errors for both estimands. Exploiting the closed-form linearity of the additive-hazards estimating equation, we derive the influence functions and prove the default row-level robust variance inconsistent for the marginal risk-difference curve, and show the same failure empirically for the constant hazard difference: the row-level variance omits a within-subject cross-trial covariance that is positive under a sign condition we verify across our mechanisms, and is anticonservative at every horizon except the first - only there, where the covariance is zero, is the row-level standard error unimpaired. The subject-clustered variance and multiplier bootstrap are consistent for the fixed-weight linearisation and support simultaneous confidence bands, whose measured coverage is 0.88. Across our simulations the model-based and row-level robust intervals are anticonservative and worsen with sample size, coverage falling to 0.71 at n=5000; clustering leaves the constant-hazard-difference coverage near 0.86 at n=5000, and the multiplier bootstrap leaves the risk-difference-curve coverage near 0.90 (0.86 at the longest horizon). The STE constant hazard difference is a design-weighted summary of a time-varying effect, dependent on the trial structure. We illustrate on the Stanford heart transplant data and provide them in the steCI R package.

Selective Classification, wherein models can reject low-confidence predictions, promises reliable translation of machine-learning based classification systems to real-world scenarios such as clinical diagnostics. While current evaluation of these systems typically assumes fixed working points based on pre-defined rejection thresholds, methodological progress requires benchmarking the general performance of systems akin to the AUROC in standard classification. In this work, we define 5 requirements for multi-threshold metrics in selective classification regarding task alignment, interpretability, and flexibility, and show how current approaches fail to meet them. We propose the Area under the Generalized Risk Coverage curve (AUGRC), which meets all requirements and can be directly interpreted as the average risk of undetected failures. We empirically demonstrate the relevance of AUGRC on a comprehensive benchmark spanning 6 data sets and 13 confidence scoring functions. We find that the proposed metric substantially changes metric rankings on 5 out of the 6 data sets.

Deep learning practitioners often operate on a computational and monetary budget. Thus, it is critical to design optimization algorithms that perform well under any budget. The linear learning rate schedule is considered the best budget-aware schedule, as it outperforms most other schedules in the low budget regime. On the other hand, learning rate schedules -- such as the 30-60-90 step schedule -- are known to achieve high performance when the model can be trained for many epochs. Yet, it is often not known a priori whether one's budget will be large or small; thus, the optimal choice of learning rate schedule is made on a case-by-case basis. In this paper, we frame the learning rate schedule selection problem as a combination of i) selecting a profile (i.e., the continuous function that models the learning rate schedule), and ii) choosing a sampling rate (i.e., how frequently the learning rate is updated/sampled from this profile). We propose a novel profile and sampling rate combination called the Reflected Exponential (REX) schedule, which we evaluate across seven different experimental settings with both SGD and Adam optimizers. REX outperforms the linear schedule in the low budget regime, while matching or exceeding the performance of several state-of-the-art learning rate schedules (linear, step, exponential, cosine, step decay on plateau, and OneCycle) in both high and low budget regimes. Furthermore, REX requires no added computation, storage, or hyperparameters.

This article introduces Regression Discontinuity Design (RDD) with Distribution-Valued Outcomes (R3D), extending the standard RDD framework to settings where the outcome is a distribution rather than a scalar. Such settings arise when treatment is assigned at a higher level of aggregation than the outcome-for example, when a subsidy is allocated based on a firm-level revenue cutoff while the outcome of interest is the distribution of employee wages within the firm. Since standard RDD methods cannot accommodate such two-level randomness, I propose a novel approach based on random distributions. The target estimand is a "local average quantile treatment effect", which averages across random quantiles. To estimate this target, I introduce two related approaches: one that extends local polynomial regression to random quantiles and another based on local Fr\'echet regression, a form of functional regression. For both estimators, I establish asymptotic normality and develop uniform, debiased confidence bands together with a data-driven bandwidth selection procedure. Simulations validate these theoretical properties and show existing methods to be biased and inconsistent in this setting. I then apply the proposed methods to study the effects of gubernatorial party control on within-state income distributions in the US, using a close-election design. The results suggest a classic equality-efficiency tradeoff under Democratic governorship, driven by reductions in income at the top of the distribution.

BraTS-GoAT evaluates tumor segmentation across heterogeneous populations. We trained a conventional 3D nnU-Net on 1,351 labeled cases using five-fold cross-validation and 1,000 epochs per fold. The final predictor averaged all folds and applied test-time mirroring. On pooled official validation, global DSC values were 0.7805, 0.8288, and 0.8854 for enhancing tumor (ET), tumor core (TC), and whole tumor (WT). Under matched fold-0 inference, mean regional Dice decreased from 0.9058 on source out-of-fold (OOF) cases to 0.8310 on pooled validation (difference--0.0747). Mirroring gave small single-fold gains but no clear ensemble benefit; a residual-encoder alternative reached 0.8282 mean Dice. In labeled OOF predictions, failure cases had substantially smaller reference ET volumes; after adjustment for ET and WT volume, lower Dice remained associated with more disconnected ET components and a smaller fraction of ET contained in the largest component.

Computer-use agents ground natural-language instructions in screenshots to locate interface elements, yet existing benchmarks do not isolate whether models bind relational language to the correct element. We introduce GUI-Primitives, a 994-item benchmark of contrastive instruction pairs over seven spatial relations in graphical user interfaces (left/right, above/below, containment, alignment, proximity, list ordinal, occlusion). Each pair holds the screenshot and anchor fixed while changing the relation expression, so the correct target moves between two designated candidates. Five annotators validate a 196-item subset (κ= 0.94 well-formedness; κ= 0.79 target selection). Nineteen vision-language models reach at most 32% strict point-in-box accuracy. Because models emit unconstrained coordinates, we classify each prediction by the candidate region it falls within. Predictions fall outside both candidates on 60-92% of items. Conditional on falling within a candidate region, target selection reaches 0.82-0.90 for horizontal position, vertical position, proximity, and list ordinal, but does not differ significantly from 0.50 for containment and occlusion: most failures reflect candidate localization rather than relation understanding. Across ten models, benchmark accuracy correlates with ScreenSpot-Pro accuracy (Spearman ρ= +0.74), an exploratory association at this sample size. Marking the two designated candidates raises selection accuracy by 35--57 percentage points, an oracle diagnostic that supplies the candidate set rather than a deployable method. We release the benchmark, predictions, and code.

A central statistical problem in population genetics is to infer evolutionary and biological parameters such as the strength of natural selection and allele age from DNA samples extracted from a contemporary population. That all samples come only from the present-day has long been known to limit statistical inference; there is potentially more information available if one also has access to ancient DNA so that inference is based on a time-series of historical changes in allele frequencies. We introduce a Markov Chain Monte Carlo (MCMC) method for Bayesian inference from allele frequency time-series data based on an underlying Wright--Fisher diffusion model of evolution, through which one can infer the parameters of essentially any selection model including those with frequency-dependent effects. The chief novelty is that we show this method to be exact in the sense that it is possible to augment the state space explored by MCMC with the unobserved diffusion trajectory, even though the transition function of this diffusion is intractable. Through careful design of a proposal distribution, we describe an efficient method in which updates to the trajectory and accept/reject decisions are calculated without error. We illustrate the method on data capturing changes in coat colour over the past 20,000 years, and find evidence to support previous findings that the mutant alleles ASIP and MC1R responsible for changes in coat color have experienced very strong, possibly overdominant, selection and further provide estimates for the ages of these genes.

To take the esports scene to the next level, we introduce PandaSkill, a framework for assessing player performance and skill rating. Traditional rating systems like Elo and TrueSkill often overlook individual contributions and face challenges in professional esports due to limited game data and fragmented competitive scenes. PandaSkill leverages machine learning to estimate in-game player performance from individual player statistics. Each in-game role is modeled independently, ensuring a fair comparison between them. Then, using these performance scores, PandaSkill updates the player skill ratings using the Bayesian framework OpenSkill in a free-for-all setting. In this setting, skill ratings are updated solely based on performance scores rather than game outcomes, hightlighting individual contributions. To address the challenge of isolated rating pools that hinder cross-regional comparisons, PandaSkill introduces a dual-rating system that combines players' regional ratings with a meta-rating representing each region's overall skill level. Applying PandaSkill to five years of professional League of Legends matches worldwide, we show that our method produces skill ratings that better predict game outcomes and align more closely with expert opinions compared to existing methods.

Model selection/optimization in conformal inference is challenging, since it may break the exchangeability between labeled and unlabeled data. We study this problem in the context of conformal selection, which uses conformal p-values to select ``interesting'' instances with large unobserved labels from a pool of unlabeled data, while controlling the FDR in finite sample. For validity, existing solutions require the model choice to be independent of the data used to construct the p-values and calibrate the selection set. However, when presented with many model choices and limited labeled data, it is desirable to (i) select the best model in a data-driven manner, and (ii) mitigate power loss due to sample splitting. This paper presents OptCS, a general framework that allows valid statistical testing (selection) after flexible data-driven model optimization. We introduce general conditions under which OptCS constructs valid conformal p-values despite substantial data reuse and handles complex p-value dependencies to maintain finite-sample FDR control via a novel multiple testing procedure. We instantiate this general recipe to propose three FDR-controlling procedures, each optimizing the models differently: (i) selecting the most powerful one among multiple pre-trained candidate models, (ii) using all data for model fitting without sample splitting, and (iii) combining full-sample model fitting and selection. We demonstrate the efficacy of our methods via simulation studies and real applications in drug discovery and alignment of large language models in radiology report generation.

Combining the answers a large language model (LLM) samples for a question into one decision is a test-time information fusion problem, usually solved by majority voting. Voting is unreliable on difficult questions, where the sampled answers share correlated errors, so the wrong answer can win and drawing more samples makes the decision worse. Selecting a candidate by reading a correctness signal from the model's hidden states is a promising alternative, but its accuracy varies across models and tasks, and no measure indicates when it can be trusted. In this paper, we propose CASE (Correctness-Axis SElection), a dynamic selection combiner that trains a linear gate on the answer-token hidden state and selects the highest-scoring candidate. Its main contribution is decodability, a leakage-free measure of how well the gate ranks a question's correct candidates above its incorrect ones, which predicts whether hidden-state selection will outperform voting. A conventional probe appears accurate only because of question-identity leakage, which vanishes under question-grouped evaluation. On held-out data, decodability predicts the accuracy gain of selection over voting with a Pearson correlation r=0.75 and a decision threshold near AUC=0.60. Across general and medical LLMs, CASE improves over voting by up to 19 points on medium-difficulty questions and 16.8 points on hard questions. Decodability depends on the aligned knowledge a model must recall, not on its scale, and its prediction transfers to an unseen scientific domain within 3.8 points. It thus provides a practical criterion, measurable in advance for a given model and task, for choosing between learned selection and majority voting.

Sparse attention visits few keys, yet finding them can still require scoring every key with every indexer head. We introduce DoSA (Dots Sparse Attention), a lossless method for making this computation conditional while preserving exact token selection. Its central observation is that Top-K selection requires sufficient evidence to reject a candidate, not necessarily its full score. A seed set supplies a lower bound on the winning threshold. Nonnegative head projections and joint residual bounds upper-bound positive contributions, while activation-informed aggregation bounds the magnitude subtracted by negative heads. The certificate directs full scoring toward candidates that remain eligible; exact-score filtering further reduces writeback and selection work. We establish the certificate and its exact-selection conditions, and analyze how geometry and selection margins govern its effectiveness. Our GPU implementation accelerates the complete Indexer by up to 2.74 times over SGLang and 1.69 times over LiteTopK across English, Chinese, and code workloads. End-to-end evaluation on GLM-5.2 and DeepSeek-V3.2 achieves up to 1.94 times and 1.50 times time-to-first-token speedups over the two baselines, respectively.

Researchers have proposed numerous text-to-SQL techniques to streamline data analytics and accelerate the development of data-driven applications. To compare these techniques and select the best one for deployment, the community depends on public benchmarks and their leaderboards. Since these benchmarks heavily rely on human annotations during question construction and answer evaluation, the validity of the annotations is crucial. In this paper, we conduct an empirical study that (i) benchmarks annotation error rates for two widely used text-to-SQL benchmarks, BIRD and Spider 2.0-Snow, and (ii) corrects a subset of the BIRD development (Dev) set to measure the impact of annotation errors on text-to-SQL agent performance and leaderboard rankings. Through expert analysis, we show that BIRD Mini-Dev and Spider 2.0-Snow have error rates of 52.8% and 62.8%, respectively. We re-evaluate all 16 open-source agents from the BIRD leaderboard on both the original and the corrected BIRD Dev subsets. We show that performance changes range from -7% to 31% (in relative terms) and rank changes range from -9 to +9 positions. We further assess whether these impacts generalize to the full BIRD Dev set. We find that the rankings of agents on the uncorrected subset correlate strongly with those on the full Dev set (Spearman's r_s=0.85, p=3.26e-5), whereas they correlate weakly with those on the corrected subset (Spearman's r_s=0.32, p=0.23). These findings show that annotation errors can significantly distort reported performance and rankings, potentially misguiding research directions or deployment choices. Our code and data are available at https://github.com/uiuc-kang-lab/text_to_sql_benchmarks.

In domains ranging from computer vision to natural language processing, machine learning models have been shown to exhibit stark disparities, often performing worse for members of traditionally underserved groups. One factor contributing to these performance gaps is a lack of representation in the data the models are trained on. It is often unclear, however, how to operationalize representativeness in specific applications. Here we formalize the problem of creating equitable training datasets, and propose a statistical framework for addressing this problem. We consider a setting where a model builder must decide how to allocate a fixed data collection budget to gather training data from different subgroups. We then frame dataset creation as a constrained optimization problem, in which one maximizes a function of group-specific performance metrics based on (estimated) group-specific learning rates and costs per sample. This flexible approach incorporates preferences of model-builders and other stakeholders, as well as the statistical properties of the learning task. When data collection decisions are made sequentially, we show that under certain conditions this optimization problem can be efficiently solved even without prior knowledge of the learning rates. To illustrate our approach, we conduct a simulation study of polygenic risk scores on synthetic genomic data -- an application domain that often suffers from non-representative data collection. We find that our adaptive sampling strategy outperforms several common data collection heuristics, including equal and proportional sampling, demonstrating the value of strategic dataset design for building equitable models.

Long-video language models cannot look at every frame: an hour sampled once per second is 3,600 images, and a system keeps only a small fixed slice of that pool. Which frames survive that slice is usually treated as a preprocessing detail; we test whether it should be. Published selectors make the comparison hard because they change the frame scorer, the prompt boundary, the resolution policy, and the answering model all at once. We hold each fixed and vary one decision at a time: selection, spatial compression, and reinvestment of the savings, across six training-free selection rules, three long-video benchmarks, and two answering models. Selection is the largest single lever: on LongVideoBench's hour-long bin, eight query-selected frames beat sixteen uniformly spaced ones by 6.9 points, and Orthogonal Matching Pursuit, an unmodified decades-old sparse-approximation algorithm, matches or comes within a point of every purpose-built selector we compare it against, across all three benchmarks. Compression is close to free: halving each frame's spatial budget at fixed timestamps costs at most 0.44 points. Reinvestment is where that budget turns back into accuracy: spending the freed tokens on twice as many compressed frames, at a measured cost no higher than the original eight, returns a further two to three points; compression only pays off once its savings are spent this way. Along the way, an implementation bug in our own AKS baseline and a 0.07 to 3.74 point gap between two harnesses running the same published rules at the same budget show why these comparisons need to happen inside one controlled harness rather than across papers.

We consider multi-draft speculative sampling, where the proposal sequences are sampled independently from different draft models. At each step, a token-level draft selection scheme takes a list of valid tokens as input and produces an output token whose distribution matches that of the target model. Previous works have demonstrated that the optimal scheme (which maximizes the probability of accepting one of the input tokens) can be cast as a solution to a linear program. In this work we show that the optimal scheme can be decomposed into a two-step solution: in the first step an importance sampling (IS) type scheme is used to select one intermediate token; in the second step (single-draft) speculative sampling is applied to generate the output token. For the case of two identical draft models we further 1) establish a necessary and sufficient condition on the distributions of the target and draft models for the acceptance probability to equal one and 2) provide an explicit expression for the optimal acceptance probability. Our theoretical analysis also motives a new class of token-level selection scheme based on weighted importance sampling. Our experimental results demonstrate consistent improvements in the achievable block efficiency and token rates over baseline schemes in a number of scenarios.

Selecting the best response from multiple small-model samples using a stronger scorer is a simple inference-time strategy, but fails when the small model has already committed to incorrect reasoning paths. PRM guided search avoids this by scoring candidate continuations during generation, but requires a reward model trained with step-level labels. We propose Chunk-Level Guided Generation, a training-free alternative that uses an off-the-shelf large language model as a process scorer. At each step, a small model samples k fixed-length candidate chunks, while the larger model scores the candidates using likelihoods without generating any text. The selected chunk is committed before the next step, steering generation before errors can propagate. We instantiate this framework with two selection rules: Likelihood-Guided Selection (LGS), which selects the chunk with the highest length-normalized large-model log-probability, and Contrastive-Guided Selection (CGS), which subtracts the small model's log-probability to favor chunks where the large model's preference diverges from the small model's. We show that scoring variable-length reasoning steps with large-model likelihoods is unreliable due to a systematic length bias that persists even after length normalization, and that fixed-length chunks avoid this confound. On GSM8K, MATH, Minerva Math, AMC23, and AIME24 with Qwen2.5-1.5B guided by Qwen2.5-32B and Llama-3.2-1B guided by Llama-3.1-70B, CGS outperforms majority voting by up to 28 pp and, under matched guidance budgets, matches or outperforms Qwen2.5-Math-PRM-72B guided search on most benchmarks without reward-model training. With Qwen2.5-7B guided by Qwen2.5-72B, CGS reaches 81.8% on MATH and 63.6% on Minerva Math at k=16, surpassing majority voting by 4--6 pp. Finally, Chunk-Level Guided Generation produces substantially shorter reasoning traces than PRM guided search.

We seek to improve deep neural networks by generalizing the pooling operations that play a central role in current architectures. We pursue a careful exploration of approaches to allow pooling to learn and to adapt to complex and variable patterns. The two primary directions lie in (1) learning a pooling function via (two strategies of) combining of max and average pooling, and (2) learning a pooling function in the form of a tree-structured fusion of pooling filters that are themselves learned. In our experiments every generalized pooling operation we explore improves performance when used in place of average or max pooling. We experimentally demonstrate that the proposed pooling operations provide a boost in invariance properties relative to conventional pooling and set the state of the art on several widely adopted benchmark datasets; they are also easy to implement, and can be applied within various deep neural network architectures. These benefits come with only a light increase in computational overhead during training and a very modest increase in the number of model parameters.

The rapid proliferation of Large Language Models (LLMs) and diverse specialized benchmarks necessitates a shift from fragmented, task-specific metrics to a holistic, competitive ranking system that effectively aggregates performance across multiple ability dimensions. Primarily using static scoring, current evaluation methods are fundamentally limited. They struggle to determine the proper mix ratio across diverse benchmarks, and critically, they fail to capture a model's dynamic competitive fitness or its vulnerability when confronted with sequential, high-stakes tasks. To address this, we introduce the novel Competitive Swiss-System Dynamics (CSD) framework. CSD simulates a multi-round, sequential contest where models are dynamically paired across a curated sequence of benchmarks based on their accumulated win-loss record. And Monte Carlo Simulation (N=100,000 iterations) is used to approximate the statistically robust Expected Win Score (E[S_m]), which eliminates the noise of random pairing and early-round luck. Furthermore, we implement a Failure Sensitivity Analysis by parameterizing the per-round elimination quantity (T_k), which allows us to profile models based on their risk appetite--distinguishing between robust generalists and aggressive specialists. We demonstrate that CSD provides a more nuanced and context-aware ranking than traditional aggregate scoring and static pairwise models, representing a vital step towards risk-informed, next-generation LLM evaluation.

Selecting a subset of features (columns) from a tabular dataset is a ubiquitous challenge in real-world applications. Industry experts seek to minimize model training costs, climate scientists require an interpretable subset of factors to understand extreme weather events, and clinicians need to choose among diagnostic tests due to financial and time constraints. When looking at the scientific literature to determine which feature selection method to use, practitioners across domains face an unrepresentative landscape of benchmarking. Despite extensive research, existing feature selection benchmarks provide limited guidance because they rely on outdated models, ad hoc evaluation protocols, or artificially generated data that do not reflect real-world problems. To close the gap between scientific benchmarking and real-world applications, we introduce SelectArena, a modern benchmark for feature selection. We compare 15 widely used feature selection methods on 71 manually curated real-world tabular datasets, covering classification and regression problems, using standardized evaluation protocols and state-of-the-art tabular (foundation) models. Our results reveal clear trade-offs across predictive performance, runtime, stability, and validity. Tree-based methods, CART and RFImportance, along with F-Test are Pareto-optimal when taking into account predictive performance and runtime. F-Test, information-theory-, and distance-based methods lead on stability and validity, with F-Test emerging as a balanced choice across our metrics. Search-based methods are slow, unstable and achieve low performance. SelectArena turns these findings into practical guidance and, as an extensible platform, supports future feature selection research.

One-shot coreset selection aims to select a representative subset of the training data, given a pruning rate, that can later be used to train future models while retaining high accuracy. State-of-the-art coreset selection methods pick the highest importance examples based on an importance metric and are found to perform well at low pruning rates. However, at high pruning rates, they suffer from a catastrophic accuracy drop, performing worse than even random sampling. This paper explores the reasons behind this accuracy drop both theoretically and empirically. We first propose a novel metric to measure the coverage of a dataset on a specific distribution by extending the classical geometric set cover problem to a distribution cover problem. This metric helps explain why coresets selected by SOTA methods at high pruning rates perform poorly compared to random sampling because of worse data coverage. We then propose a novel one-shot coreset selection method, Coverage-centric Coreset Selection (CCS), that jointly considers overall data coverage upon a distribution as well as the importance of each example. We evaluate CCS on five datasets and show that, at high pruning rates (e.g., 90%), it achieves significantly better accuracy than previous SOTA methods (e.g., at least 19.56% higher on CIFAR10) as well as random selection (e.g., 7.04% higher on CIFAR10) and comparable accuracy at low pruning rates. We make our code publicly available at https://github.com/haizhongzheng/Coverage-centric-coreset-selection.

Background: Agent skills are increasingly deployed as modular, reusable capability units in AI agent systems. Medical research agent skills require safeguards beyond general-purpose evaluation, including scientific integrity, methodological validity, reproducibility, and boundary safety. This study developed and preliminarily evaluated a domain-specific audit framework for medical research agent skills, with a focus on reliability against expert review. Methods: We developed MedSkillAudit (skill-auditor@1.0), a layered framework assessing skill release readiness before deployment. We evaluated 75 skills across five medical research categories (15 per category). Two experts independently assigned a quality score (0-100), an ordinal release disposition (Production Ready / Limited Release / Beta Only / Reject), and a high-risk failure flag. System-expert agreement was quantified using ICC(2,1) and linearly weighted Cohen's kappa, benchmarked against the human inter-rater baseline. Results: The mean consensus quality score was 72.4 (SD = 13.0); 57.3% of skills fell below the Limited Release threshold. MedSkillAudit achieved ICC(2,1) = 0.449 (95% CI: 0.250-0.610), exceeding the human inter-rater ICC of 0.300. System-consensus score divergence (SD = 9.5) was smaller than inter-expert divergence (SD = 12.4), with no directional bias (Wilcoxon p = 0.613). Protocol Design showed the strongest category-level agreement (ICC = 0.551); Academic Writing showed a negative ICC (-0.567), reflecting a structural rubric-expert mismatch. Conclusions: Domain-specific pre-deployment audit may provide a practical foundation for governing medical research agent skills, complementing general-purpose quality checks with structured audit workflows tailored to scientific use cases.

Instrumental variable methods have been widely used to identify causal effects in the presence of unmeasured confounding. A key identification condition known as the exclusion restriction states that the instrument cannot have a direct effect on the outcome which is not mediated by the exposure in view. In the health and social sciences, such an assumption is often not credible. To address this concern, we consider identification conditions of the population average treatment effect with an invalid instrumental variable which does not satisfy the exclusion restriction, and derive the efficient influence function targeting the identifying functional under a nonparametric observed data model. We propose a novel multiply robust locally efficient estimator of the average treatment effect that is consistent in the union of multiple parametric nuisance models, as well as a multiply debiased machine learning estimator for which the nuisance parameters are estimated using generic machine learning methods, that effectively exploit various forms of linear or nonlinear structured sparsity in the nuisance parameter space. When one cannot be confident that any of these machine learners is consistent at sufficiently fast rates to ensure n-consistency for the average treatment effect, we introduce a new criteria for selective machine learning which leverages the multiple robustness property in order to ensure small bias. The proposed methods are illustrated through extensive simulations and a data analysis evaluating the causal effect of 401(k) participation on savings.

Whether a language model has improved itself is increasingly judged not by mean accuracy but by which individual problems it gains and loses. Tracking these transitions means differencing two noisy estimates, leaving them vulnerable to measurement artifacts. Auditing three rounds of rank-32 LoRA self-training on Qwen3-8B against a frozen control pushed through the identical pipeline, we identify seven measurement failures, each of which inverts a reported finding when its control is absent. Several are standard practice. A ledger built on a single greedy decode manufactures capability changes on an untrained model, largely an artifact of inference batching; the expansion statistic separating acquisition from sharpening assigns that same model a rate of 0.280. The natural threshold repair does not survive replication: estimated across the frozen comparisons such a design already contains, its null stays non-zero. We replace it with a per-problem exact test against a pooled baseline under false-discovery-rate control, which detects nothing on any held-out replicate and is unchanged under the multiple-testing rule, error rate and pool size. Applied to a ladder of arms matched in stream, volume and evaluation, the audit finds that external distillation improves problems the base model rarely reaches while three forms of self-training do not; a regression rejects this asymmetry as a by-product of distillation's larger overall gain (p < 10^{-8}). On the far smaller set of problems the base model never reaches, the evidence is inconclusive, while self-training corrupts problems solved at baseline at rates well above the measured floor. Transition-level auditing therefore requires a separately measured null for every statistic it reports: nulls that cost no new experiments, built from baseline replicates a multi-arm study already owns, though not from as few as most possess.

LLM judges are used to reduce the need for costly human labor in evaluating open-ended text generation. However, the reliability of these judges depends critically on their alignment with human raters -- a property that itself depends on costly human annotations. In this work, we develop a method (Metric Match) for estimating correlation-based reliability metrics of LLM judges from limited annotations. Metric Match selects a subset of samples for human annotation such that the subset matches the population reliability metric with respect to acquired synthetic labels. We empirically show that Metric Match achieves a win-rate of 0.838 against random subset selection across four different correlation metrics and 15 datasets, with an 18.7% decrease in average estimation error and reduces annotation needs by 32.5%. We provide a cost model and highlight a medical case study where our method saves $1,041.67 compared to random selection for expert annotation. Further, we shift our task from reliability estimation to reliability classification of whether a given judge is above a deployment threshold, outperforming random selection with Metric Match. All project code is publicly available, and we additionally provide an installable package for ease of use.

This paper considers the problem of variable selection allowing for parameter instability. It distinguishes between signal and pseudo-signal variables that are correlated with the target variable, and noise variables that are not, and investigate the asymptotic properties of the One Covariate at a Time Multiple Testing (OCMT) method proposed by Chudik et al. (2018) under parameter insatiability. It is established that OCMT continues to asymptotically select an approximating model that includes all the signals and none of the noise variables. Properties of post selection regressions are also investigated, and in-sample fit of the selected regression is shown to have the oracle property. The theoretical results support the use of unweighted observations at the selection stage of OCMT, whilst applying down-weighting of observations only at the forecasting stage. Monte Carlo and empirical applications show that OCMT without down-weighting at the selection stage yields smaller mean squared forecast errors compared to Lasso, Adaptive Lasso, and boosting.

Language model (LM) benchmarking faces several challenges: comprehensive evaluations are costly, benchmarks often fail to measure the intended capabilities, and evaluation quality can degrade due to labeling errors and benchmark saturation. Although various strategies have been proposed to mitigate these issues, they tend to address individual aspects in isolation, neglecting broader questions about overall evaluation quality. Here, we introduce Fluid Benchmarking, a new evaluation approach that advances LM benchmarking across multiple dimensions. Inspired by psychometrics, Fluid Benchmarking is based on the insight that the relative value of benchmark items depends on an LM's capability level, suggesting that evaluation should adapt to each LM. Methodologically, Fluid Benchmarking estimates an item response model based on existing LM evaluation results and uses the inferred quantities to select evaluation items dynamically, similar to computerized adaptive testing in education. In our experiments, we compare Fluid Benchmarking against the common practice of random item sampling as well as more sophisticated baselines, including alternative methods grounded in item response theory. We examine four dimensions -- efficiency, validity, variance, and saturation -- and find that Fluid Benchmarking achieves superior performance in all of them (e.g., higher validity and less variance on MMLU with fifty times fewer items). Our analysis shows that the two components of Fluid Benchmarking have distinct effects: item response theory, used to map performance into a latent ability space, increases validity, while dynamic item selection reduces variance. Overall, our results suggest that LM benchmarking can be substantially improved by moving beyond static evaluation.

The inherent rigidity of fixed-size benchmarks makes them an inefficient tool for model evaluation. Diverse evaluation objectives, including model ranking, model selection and testing throughout development, demand varying levels of statistical power. The mismatch between fixed sample sizes and these diverse needs results in either excessive computational cost or compromised reliability - a critical concern for model evaluation. To overcome these limitations, we call for adoption of sequential testing in our field. We provide an adaptive evaluation framework, that provides a principled way to navigate the trade-off between efficiency and reliability in model evaluation. Our framework combines the established statistical paradigm of sequential testing with stopping criteria tailored to common evaluation needs such as diminishing returns detection, and minimum detectable effect size. We demonstrate its ability to adaptively manage the efficiency-reliability trade-off on the Open VLM Leaderboard, including, for example, a 80% reduction in computational cost compared to fixed-size evaluation (with a 2.5-point CI width allowance) while maintaining statistical significance.

Pretrained language models (LMs) perform well on many tasks even when learning from a few examples, but prior work uses many held-out examples to tune various aspects of learning, such as hyperparameters, training objectives, and natural language templates ("prompts"). Here, we evaluate the few-shot ability of LMs when such held-out examples are unavailable, a setting we call true few-shot learning. We test two model selection criteria, cross-validation and minimum description length, for choosing LM prompts and hyperparameters in the true few-shot setting. On average, both marginally outperform random selection and greatly underperform selection based on held-out examples. Moreover, selection criteria often prefer models that perform significantly worse than randomly-selected ones. We find similar results even when taking into account our uncertainty in a model's true performance during selection, as well as when varying the amount of computation and number of examples used for selection. Overall, our findings suggest that prior work significantly overestimated the true few-shot ability of LMs given the difficulty of few-shot model selection.

A service system may use the same categories to assign standard allocations and to check whether each service is fulfilled. Finer categories can match individual needs more closely, but they divide the observations available for monitoring. We study this conflict for a fixed menu from which participants select by declaring a category, with fulfilment assessed from each category's aggregate outcomes during a fixed period. We relate allocation loss to variation in preferred allocations within categories and identify conditions under which aggregate observations preserve the verification performance of individual records. For nested refinements under stated utility and observation assumptions, an allocation-loss tolerance and a per-category detection target define a feasibility band. Categories must be fine enough to provide suitable allocations but sufficiently populated to support verification. A source-dependent lower bound on declaration entropy and a minimum contributor requirement give necessary information and population constraints. For an explicit finite population with quadratic utility and binary service outcomes, we prove the exact feasible range across all categorical designs and exhibit designs attaining the information lower bound at specified tolerances. The results provide conditions for choosing categories jointly for allocation and verification.

Test-time training (TTT) adapts language models through gradient-based updates at inference. But is adaptation the right strategy? We study compute-optimal test-time strategies for verifiable execution-grounded (VEG) tasks, domains like GPU kernel optimization where a deterministic evaluator provides dense, continuous reward signals. Using KernelBench as our testbed and a 120B-parameter model (GPT-OSS-120B with LoRA adaptation), we find that search outperforms minimal adaptation (1-5 gradient steps): Best-of-N sampling achieves 90% task success (18/20 tasks) at K=64 across the full KernelBench L1 eval set while TTT's best checkpoint reaches only 30.6% (3-seed mean), with TTT's "equivalent K" falling below 1, worse than single-sample inference. The failure mode is over-sharpening: gradient updates collapse diversity toward mediocre solutions rather than discovering optimal ones. Our main contribution is surprisal-guided selection: selecting the highest-surprisal (lowest-confidence) correct sample yields 80% success vs. 50% for most-confident selection, a 30% improvement. Extending to surprisal-guided-top3 matches oracle performance at 100%. This zero-cost strategy, validated through length-controlled analysis, recovers oracle performance. For dense-reward VEG tasks, compute should be allocated to sample diversity and intelligent selection rather than gradient adaptation. The surprisal-guided selection principle may generalize to other execution-grounded domains where optimal solutions occupy the distribution tail.

In staggered treatment-adoption designs, later-treated units are valid controls for an earlier-treated cohort only until their own treatment begins, so the admissible donor set contracts with event time. Fixing the donor pool at the longest horizon discards temporarily eligible donors, whereas re-estimating synthetic-control weights independently at each horizon can make the counterfactual unstable as donor composition changes. We propose Risk-Set Transported Synthetic Control with Difference-in-Differences Adjustment (RT-SC-DiD). For each cohort and event-time horizon, the estimator fits weights on the currently untreated donors while shrinking them toward a transported reference that reallocates the weight of exiting donors to similar surviving donors. A DiD baseline correction removes persistent level differences. We characterize distortion from horizon-by-horizon reoptimization, derive the loading change induced by naive deletion and renormalization, and give a conditional recursive bound for error propagation under an explicitly assumed regularity condition on the transport map. We also introduce donor-support diagnostics and a donor-only placebo procedure for selecting the transport penalty. In an 80-replication pilot comparison and a separate 40-replication-per-value sensitivity analysis, intermediate transport regularization reduces average RMSE relative to independent horizon-specific estimation and strong anchoring. This evidence supports the method's bias-variance motivation but is not a proved guarantee. RT-SC-DiD is intended for settings where later-treated units provide useful short-horizon information and donor support contracts materially over time. Existing staggered synthetic-control and synthetic difference-in-differences methods do not, to our knowledge, explicitly regularize within-cohort weight sequences toward transported references as risk sets contract.

A selector that allocates work across opaque components must evaluate them without being told how they performed. We study the least communication that suffices. Each parent maintains an allocation vector over its children and updates it from outcomes by proportional redistribution. Each child reads the sign of its own allocation change, one bit per round it is selected, so no evaluation message crosses the parent-child boundary. (1) The update preserves the simplex with strict positivity. (2) Conditional on being selected, a child's sign is exactly the root outcome at every depth, a sufficient statistic. The conditioning is necessary. (3) Under interiority a single selector has a unique interior equilibrium, exact and closed-form for N=2, with almost sure convergence under decreasing steps. For general N an equi-ratio condition gives an explicit affine equilibrium. (4) The linearised mean flow has real, strictly negative tangent eigenvalues with explicit bounds for all N >= 2. (5) The mean flow converges globally. An explicit potential, up to normalisation the KL divergence between the failure and slack distributions, decreases at a rate equal to the variance of the equi-ratio statistic. Without interiority the rule drops exactly the children below the surviving support's threshold. (6) The update law composes along a single active path, since ancestors select a node's active rounds but do not alter a realised signal. No joint convergence theorem for a hierarchy whose levels adapt simultaneously is claimed. (7) The one-bit interface admits exactly four deterministic memoryless distortions, and at a single selector passing the bit on unchanged delivers strictly higher mean quality upward than negation or constant transmission. Illustrations on synthetic hierarchies up to 16,384 leaves and three real datasets (3.4 billion comparisons, no mismatches) are consistent with the theory.

Traditional direct estimation methods are not efficient for domains of a survey population with small sample sizes. To estimate the domain proportions, we combine the direct estimators and the regression-synthetic estimators based on domain-level auxiliary information. For the case of small true proportions, we introduce the design-based linear combination that is a robust alternative to the empirical best linear unbiased predictor (EBLUP) based on the Fay--Herriot model. We also consider an adaptive procedure optimizing a sample-size-dependent composite estimator, which depends on a single parameter for all domains. We imitate the Lithuanian Labor Force Survey, where we estimate the proportions of the unemployed and employed in municipalities. We show where the considered design-based compositions and estimators of their mean square errors are competitive for EBLUP and its accuracy estimation.

We propose a direct estimation method for R\'{e}nyi and f-divergence measures based on a new graph theoretical interpretation. Suppose that we are given two sample sets X and Y, respectively with N and M samples, where eta:=M/N is a constant value. Considering the k-nearest neighbor (k-NN) graph of Y in the joint data set (X,Y), we show that the average powered ratio of the number of X points to the number of Y points among all k-NN points is proportional to R\'{e}nyi divergence of X and Y densities. A similar method can also be used to estimate f-divergence measures. We derive bias and variance rates, and show that for the class of gamma-H\"{o}lder smooth functions, the estimator achieves the MSE rate of O(N^{-2gamma/(gamma+d)}). Furthermore, by using a weighted ensemble estimation technique, for density functions with continuous and bounded derivatives of up to the order d, and some extra conditions at the support set boundary, we derive an ensemble estimator that achieves the parametric MSE rate of O(1/N). Our estimators are more computationally tractable than other competing estimators, which makes them appealing in many practical applications.

Large language models (LLMs) are increasingly used as judges to replace costly human preference labels in pairwise evaluation. Despite their practicality, LLM judges remain prone to miscalibration and systematic biases. This paper proposes SCOPE (Selective Conformal Optimized Pairwise Evaluation), a framework for selective pairwise judging with finite-sample statistical guarantees. Under exchangeability, SCOPE calibrates an acceptance threshold such that the error rate among non-abstained judgments is at most a user-specified level α. To provide SCOPE with a bias-neutral uncertainty signal, we introduce Bidirectional Preference Entropy (BPE), which queries the judge under both response positions, aggregates the implied preference probabilities to enforce invariance to response order, and converts the aggregated probability into an entropy-based uncertainty score. Across MT-Bench, RewardBench, and Chatbot Arena, BPE improves uncertainty quality over standard confidence proxies, providing a stronger selection signal that enables SCOPE to consistently meet the target risk level while retaining good coverage across judge scales. In particular, at α= 0.10, SCOPE consistently satisfies the risk bound across all benchmarks and judge scales (empirical risk approx 0.097 to 0.099), while retaining substantial coverage, reaching 0.89 on RewardBench with Qwen-14B and 0.98 on RewardBench with Qwen-32B. Compared to naïve baselines, SCOPE accepts up to 2.4times more judgments on MT-Bench with Qwen-7B under the same target risk constraint, demonstrating that BPE enables reliable and high-coverage LLM-based evaluation.

A foundation encoder is pretrained once on a large image corpus and then reused with its weights frozen. Each new task is solved by training a small head on the features it produces. This setup is common in medical imaging, where labeled cases are scarce and a frozen encoder can be reused across findings. All downstream tasks then depend on the class separation present in that fixed feature space. Encoder selection usually uses the area under the receiver operating characteristic curve (AUROC) of a trained downstream head. AUROC measures the predictive information a head can extract from the features, but it does not measure class separation in the frozen feature space. A positive image that lies near a negative image in feature space has a bounded normalized margin under any Lipschitz head. Chance-calibrated neighborhood discordance (CANDOR) measures this feature-space separation without training a head. For a positive image, it compares the k nearest positive-label neighbors with the k nearest negative-label neighbors, among images acquired the same way. Discordance rate D is the share of positives whose opposite-label neighbors are nearer. Drawing the 2 candidate sets at equal size makes the labels interchangeable, so label-independent features have chance level D=1/2 without simulation. We apply CANDOR to 22 frozen encoders on 605,443 images from 20 public datasets, covering 8 binary tasks in 7 domains. On every task, the best encoder is below 1/2. A discordant image bounds the normalized margin of every Lipschitz head on that encoder. A selector that is shown the true label and chooses among 11 encoders reduces the miss rate from 0.359 to 0.028. Discordance is associated with occlusion retention and with none of pretraining objective, parameter count, release year, or finding size. The fixed chance level lets D be computed for a frozen encoder before any downstream head is trained.

The explosion of large-scale data in fields such as finance, e-commerce, and social media has outstripped the processing capabilities of single-machine systems, driving the need for distributed statistical inference methods. Traditional approaches to distributed inference often struggle with achieving true sparsity in high-dimensional datasets and involve high computational costs. We propose a novel, two-stage, distributed best subset selection algorithm to address these issues. Our approach starts by efficiently estimating the active set while adhering to the ell_0 norm-constrained surrogate likelihood function, effectively reducing dimensionality and isolating key variables. A refined estimation within the active set follows, ensuring sparse estimates and matching the minimax ell_2 error bound. We introduce a new splicing technique for adaptive parameter selection to tackle subproblems under ell_0 constraints and a Generalized Information Criterion (GIC). Our theoretical and numerical studies show that the proposed algorithm correctly finds the true sparsity pattern, has the oracle property, and greatly lowers communication costs. This is a big step forward in distributed sparse estimation.

Benchmarks shape scientific conclusions about model capabilities and steer model development. This creates a feedback loop: stronger benchmarks drive better models, and better models demand more discriminative benchmarks. Ensuring benchmark reliability is therefore essential for trustworthy evaluation and meaningful progress. In this work, we study benchmark reliability from a distributional perspective and introduce benchmark harmony, which measures how uniformly a model's performance is distributed across the subdomains of a benchmark. We posit that high harmony is a desirable benchmark property, indicating that the aggregate metric reflects uniform competence across subdomains. Across 19 multiple-choice benchmarks and five model families, we map each benchmark onto a mean-variance plane of harmony computed across models, where high mean and low variance signal more reliable evaluation. Our analysis shows that less harmonious benchmarks can give misleading results, since overall accuracy may be disproportionately influenced by specific subdomains. For instance, ARC-Easy is overwhelmed by questions on Biological Concepts, overshadowing other critical subdomains such as Geography, Physics, Chemistry, and Environmental Science. By recommending that harmony should be reported alongside accuracy, we reframe evaluation from simple performance averages to a more robust, distributionally reliable measurement of performance.

Agentic systems are evaluated on benchmarks where agents interact with environments to solve tasks. Most papers report a pass@1 score computed from a single run per task, assuming this gives a reliable performance estimate. We test this assumption by collecting 60,000 agentic trajectories on SWE-Bench-Verified, spanning three models and two scaffolds. We find substantial variance: single-run pass@1 estimates vary by 2.2 to 6.0 percentage points depending on which run is selected, with standard deviations exceeding 1.5 percentage points even at temperature 0. This variance has critical implications: reported improvements of 2--3 percentage points may reflect evaluation noise rather than genuine algorithmic progress. Through token-level analysis, we show that trajectories diverge early, often within the first few percent of tokens, and that these small differences cascade into different solution strategies. To enable reliable evaluation of agentic systems, we recommend three concrete practices: (1) estimate pass@1 from multiple independent runs per task, especially when measuring small improvements, (2) use statistical power analysis to determine the number of runs needed to detect expected effect sizes, and (3) consider metrics like pass@k (optimistic bound) and pass^k (pessimistic bound) with k>1 to better characterize the full performance envelope. While these practices increase evaluation cost, they are essential for distinguishing genuine scientific progress from statistical noise.

We consider identification of average treatment effects on the treated (ATT) within the difference-in-differences (DiD) framework in the presence of endogenous sample selection. First, we establish that the usual DiD estimand fails to recover meaningful treatment effects, even if selection and treatment assignment are independent. Next, we partially identify the ATT for individuals who are always observed post-treatment regardless of their treatment status, and derive bounds on this parameter under different sets of assumptions about the relationship between sample selection and treatment assignment. Extensions to the repeated cross-section and two-by-two comparisons in the staggered adoption case are explored. Furthermore, we provide identification results for the ATT of three additional empirically relevant latent groups by incorporating outcome mean dominance assumptions which have intuitive appeal in applications. Finally, two empirical illustrations demonstrate the approach's usefulness by revisiting (i) the effect of a job training program on earnings(Calonico & Smith, 2017) and (ii) the effect of a working-from-home policy on employee performance (Bloom, Liang, Roberts, & Ying, 2015).

Several published comparisons of variational quantum optimizers time only runs that reach a target loss, or read the verdict at a single target. Either convention could decide whether an optimizer's costlier steps pay off. We measure how much each convention changes verdicts among Adam, simultaneous perturbation stochastic approximation (SPSA) and quantum natural gradient (QNG), on initializations held out from the selection of settings. We compute the exact metric that preconditions QNG, price every step in circuit evaluations and give every method the same budget. In a median pooled over circuit widths, cost families and a sweep of settings with common misses, SPSA needs more than twice Adam's evaluations to reach a loose target. Dropping the censored runs that miss the target hides this gap. On the global-cost family we hold fixed the settings selected for a strict target. QNG then usually reaches the loose target after Adam but the strict target first. QNG's strict-target lead disappears when the metric's simulator price, linear in the number of parameters, is replaced by an assumed hardware count quadratic in that number. We recommend charging every miss the budget and reporting verdicts across targets.

BoN improves model outputs by sampling several candidates and selecting one with a proxy score, but it assumes that complete candidates can be evaluated reliably. Many vision-language tasks instead provide only partial verification: a finding, span, value, region, or relation may be checkable even when no dependable whole-response verifier exists. Moreover, the same claim may recur across candidates with opposing stances, allowing one observation to support part of the pool and contradict another. We introduce Best-of-Evidence (BoE), an inference-time selection framework that keeps the BoN candidate pool fixed, represents reusable claims with a signed candidate--factor graph, and allocates a limited budget to evidence actions that can change the final choice. BoE formalizes selection under partial verification and provides a practical score-based controller, with the zero-budget case recovering the underlying BoN decision. Theoretically, we show that residual evidence capacity limits any evidence-driven improvement and that shared factor queries can achieve an O(log K) versus Θ(K) query separation in a factor-code model. Common-ledger experiments on four medical VQA settings show that BoE can improve fixed-pool selection and rescue some BoN failures when evidence is reliable, contrastive, and decision-relevant, while also revealing the channel-quality and candidate-generation limits that prevent universal gains.

We consider the problem of subset selection where one is given multiple rankings of items and the goal is to select the highest ``quality'' subset. Score functions from the multiwinner voting literature have been used to aggregate rankings into quality scores for subsets. We study this setting of subset selection problems when, in addition, rankings may contain systemic or unconscious biases toward a group of items. For a general model of input rankings and biases, we show that requiring the selected subset to satisfy group fairness constraints can improve the quality of the selection with respect to unbiased rankings. Importantly, we show that for fairness constraints to be effective, different multiwinner score functions may require a drastically different number of rankings: While for some functions, fairness constraints need an exponential number of rankings to recover a close-to-optimal solution, for others, this dependency is only polynomial. This result relies on a novel notion of ``smoothness'' of submodular functions in this setting that quantifies how well a function can ``correctly'' assess the quality of items in the presence of bias. The results in this paper can be used to guide the choice of multiwinner score functions for the subset selection setting considered here; we additionally provide a tool to empirically enable this.

Evaluating large language models at scale remains a practical bottleneck for many organizations. While existing evaluation frameworks work well for thousands of examples, they struggle when datasets grow to hundreds of thousands or millions of samples. This scale is common when assessing model behavior across diverse domains or conducting comprehensive regression testing. We present Spark-LLM-Eval, a distributed evaluation framework built natively on Apache Spark. The system treats evaluation as a data-parallel problem, partitioningexamplesacrossexecutorsandaggregatingresultswithproperstatistical accounting. Beyond raw throughput, we emphasize statistical rigor: every reported metric includes bootstrap confidence intervals, and model comparisons come with appropriate significance tests (paired t-tests, McNemar's test, or Wilcoxon signed-rank, depending on the metric type). The framework also addresses the cost problem inherent in LLM evaluation through content-addressable response caching backed by Delta Lake, which allows iterating on metric definitions without re-running inference. We describe the system architecture, the statistical methodology, and report benchmark results showing linear scaling with cluster size. The framework and all evaluation code are available as open source.

We initiate the study of statistical inference and A/B testing for first-price pacing equilibria (FPPE). The FPPE model captures the dynamics resulting from large-scale first-price auction markets where buyers use pacing-based budget management. Such markets arise in the context of internet advertising, where budgets are prevalent. We propose a statistical framework for the FPPE model, in which a limit FPPE with a continuum of items models the long-run steady-state behavior of the auction platform, and an observable FPPE consisting of a finite number of items provides the data to estimate primitives of the limit FPPE, such as revenue, Nash social welfare (a fair metric of efficiency), and other parameters of interest. We develop central limit theorems and asymptotically valid confidence intervals. Furthermore, we establish the asymptotic local minimax optimality of our estimators. We then show that the theory can be used for conducting statistically valid A/B testing on auction platforms. Numerical simulations verify our central limit theorems, and empirical coverage rates for our confidence intervals agree with our theory.

Safety routers send each request to one of several models and are judged against the best single model. A major routing benchmark picks that comparator on the evaluation data. In the benchmark's own setting this is harmless, but under distribution shift it is not. On HELM Safety the selection cost is 0.003-0.030 of harm under random splits and 0.045-0.113 under held-out categories, comparable to the whole deficit attributed to routing, with its direction holding under either published judge alone. It rises seven- to ninefold on AgentDojo when suites are held out. Across seven safety corpora chosen by rules fixed in advance, three meet a registered interval test and four beat a later permutation null, and three of the four interval misses are corpora where some models have zero observed harm. Prior work proves the direction of this bias. We size it on harm and accuracy, show that it is larger under the held-out splits we measure, and bound it by optimism plus a shift-dependent regret. Scored honestly under shift, routing buys little on these benchmarks. In most pool cells the nested router serves the honest baseline's model, and on the nearly saturated AgentDojo corpus a perfect pre-dispatch router is worth at most two points of harm. We also find a model's expressed recognition of a late injection steerable. On held-out reruns an attacker who knows which model it faces lowers GPT-5.4's judged recognition by 19.6 points, confirmed by an independent label. In an offline counterfactual composition into a controller, the same attack raises or lowers estimated harm depending on the fallback model. Safety routing should be evaluated under shift, against a baseline chosen without the test labels, and recognition-based defences should be scored on harm against an attacker who chooses what the model sees.

Data-centric curation pipelines frequently rely on model confidence scores to flag and filter noisy or mislabeled training instances. Evaluating this filtering convention on a large-scale consumer lending sample (LendingClub, N = 1,344,936) uncovers an underlying demographic asymmetry: high-income defaulters are disproportionately classified as label noise relative to low-income defaulters (Cramer's V approximately 0.03-0.07). Re-examining this behavior through the lens of equal opportunity [Hardt et al., 2016] reveals a far more severe discrepancy: a 16.86 percentage point gap in true positive rate (recall) between high- and low-income borrowers who ultimately defaulted. Implementing a sequential feature-blinding methodology allows us to isolate the drivers of this disparity across three distinct mechanisms: (1) direct reliance on self-reported applicant income; (2) algorithmic absorption of upstream institutional bias encoded within origination interest rates; and (3) a residual disparity (3.55 percentage points in cross-validation; 2.56 percentage points on a held-out test partition, Z = -4.04, p < 0.0001) that remains even after purging both income and interest rates from the model. Out-of-sample signed SHAP valuations demonstrate that this residual gap is maintained by structural proxies, most notably loan amount and home ownership status. These empirical findings show that simply blinding an algorithm to sensitive attributes fails to ensure fairness when institutional pricing decisions and behavioral proxy variables collectively reconstruct the omitted signals. We outline the practical implications of these findings for auditing data-centric AI workflows within regulated financial institutions.

Throughout the different phases of a drug development program, randomized trials are used to establish the tolerability, safety, and efficacy of a candidate drug. At each stage one aims to optimize the design of future studies by extrapolation from the available evidence at the time. This includes collected trial data and relevant external data. However, relevant external data are typically available as averages only, for example from trials on alternative treatments reported in the literature. Here we report on such an example from a drug development for wet age-related macular degeneration. This disease is the leading cause of severe vision loss in the elderly. While current treatment options are efficacious, they are also a substantial burden for the patient. Hence, new treatments are under development which need to be compared against existing treatments. The general statistical problem this leads to is meta-analysis, which addresses the question of how we can combine datasets collected under different conditions. Bayesian methods have long been used to achieve partial pooling. Here we consider the challenge when the model of interest is complex (hierarchical and nonlinear) and one dataset is given as raw data while the second dataset is given as averages only. In such a situation, common meta-analytic methods can only be applied when the model is sufficiently simple for analytic approaches. When the model is too complex, for example nonlinear, an analytic approach is not possible. We provide a Bayesian solution by using simulation to approximately reconstruct the likelihood of the external summary and allowing the parameters in the model to vary under the different conditions. We first evaluate our approach using fake-data simulations and then report results for the drug development program that motivated this research.

We present MixtureVitae, an open-access pretraining corpus built to minimize legal risk while providing strong model performance. MixtureVitae follows a risk-mitigated sourcing strategy that combines public-domain and permissively licensed text (e.g., CC-BY/Apache) with carefully justified low-risk additions (e.g., government works and EU TDM-eligible sources), alongside targeted instruction, reasoning and synthetic data with documented provenance. We detail a transparent, multi-stage pipeline for license-aware filtering, safety and quality screening, and domain-aware mixing, and we release the dataset and curation recipes to support reproducible research. In controlled experiments using the open-sci-ref training protocol (fixed architectures at 130M/400M/1.3B/1.7B parameters; training budgets of 50B and 300B tokens), models trained on MixtureVitae consistently outperform other permissive datasets across a suite of standard benchmarks, and at the 1.7B/300B setting they surpass FineWeb-Edu and approach DCLM in the later stages of training. Performance is particularly strong on math/code and competitive on QA tasks. These results demonstrate that permissive-first, risk-mitigated data provides a practical and legally mitigated foundation for training capable LLMs, reducing reliance on indiscriminate web scraping without sacrificing competitiveness. Code: https://github.com/ontocord/mixturevitae

Subnational studies of aid effectiveness often rely on repeated cross-sections or nighttime lights, making it difficult to separate local treatment effects from baseline differences and potentially favoring infrastructure-heavy projects. We address these limitations by studying World Bank and Chinese development projects in Africa with a balanced panel of 2,166 DHS clusters across 35 countries from 2002 to 2013. Geocoded AidData projects are linked to satellite-imputed International Wealth Index estimates, a household-centered measure of material living standards. We compare a conventional two-way fixed effects (TWFE) event-study with the switcher--stayer estimator of de Chaisemartin and D'Haultfoeuille (dCdH), which avoids contaminated comparisons under staggered treatment timing. Pre-treatment diagnostics show that project placement is frequently selective: clusters that later receive projects often begin from weaker relative positions before treatment onset. Consequently, TWFE often implies larger post-treatment gains than the preferred staggered-treatment design supports. Under dCdH, the evidence becomes more selective and sector-specific. For the World Bank, positive evidence is strongest in Health, while Education shows positive but less cleanly identified gains. For China, Water Supply and Sanitation and Other Social Infrastructure and Services show positive associations with local wealth, although residual selection concerns remain. By contrast, Chinese Energy Generation and Supply appears strongly positive under TWFE but falls close to zero under dCdH. Overall, the results do not support a donor-wide claim that either the World Bank or China uniformly improves local wealth. Instead, estimated effects are concentrated in a limited set of donor--sector panels and depend strongly on how treatment timing, selection, and outcome measurement are handled.

Real-world classifiers can benefit from the option of abstaining from predicting on samples where they have low confidence. Such abstention is particularly useful on samples which are close to the learned decision boundary, or which are outliers with respect to the training sample. These settings have been the subject of extensive but disjoint study in the selective classification (SC) and out-of-distribution (OOD) detection literature. Recent work on selective classification with OOD detection (SCOD) has argued for the unified study of these problems; however, the formal underpinnings of this problem are still nascent, and existing techniques are heuristic in nature. In this paper, we propose new plugin estimators for SCOD that are theoretically grounded, effective, and generalise existing approaches from the SC and OOD detection literature. In the course of our analysis, we formally explicate how na\"{i}ve use of existing SC and OOD detection baselines may be inadequate for SCOD. We empirically demonstrate that our approaches yields competitive SC and OOD detection performance compared to baselines from both literatures.

Evaluation benchmarks are the cornerstone of measuring capabilities of large language models (LLMs), as well as driving progress in said capabilities. Originally designed to make claims about capabilities (or lack thereof) in fully pretrained models, evaluation benchmarks are now also extensively used to decide between various training choices. Despite this widespread usage, we rarely quantify the variance in our evaluation benchmarks, which dictates whether differences in performance are meaningful. Here, we define and measure a range of metrics geared towards measuring variance in evaluation benchmarks, including seed variance across initialisations, and monotonicity during training. By studying a large number of models -- both openly available and pretrained from scratch -- we provide empirical estimates for a variety of variance metrics, with considerations and recommendations for practitioners. We also evaluate the utility and tradeoffs of continuous versus discrete performance measures and explore options for better understanding and reducing this variance. We find that simple changes, such as framing choice tasks (like MMLU) as completion tasks, can often reduce variance for smaller scale (sim7B) models, while more involved methods inspired from human testing literature (such as item analysis and item response theory) struggle to meaningfully reduce variance. Overall, our work provides insights into variance in evaluation benchmarks, suggests LM-specific techniques to reduce variance, and more generally encourages practitioners to carefully factor in variance when comparing models.

Instruction tuning relies on large instruction-response corpora whose quality and composition strongly affect downstream performance. We propose Answer Divergence-Guided Selection (ADG), which selects instruction data based on the geometric structure of multi-sample outputs. ADG draws several high-temperature generations per instruction, maps responses into an embedding space, and computes an output divergence score that jointly encodes dispersion magnitude and shape anisotropy. High scores correspond to instructions whose answers are both far apart and multi-modal, rather than clustered paraphrases along a single direction. Across two backbones and three public instruction pools, fine-tuning on only 10K ADG-selected examples consistently outperforms strong selectors on six benchmarks spanning reasoning, knowledge, and coding. Analyses further show that both dispersion magnitude and shape anisotropy are necessary, supporting answer divergence as a practical signal for instruction data selection. Code and appendix are included in the supplementary materials.

Evaluation budgets in agentic retrieval-augmented generation span questions, search trajectories, and repeated answers. We measure allocation precision, reading efficiency, and cost boundaries using a retrieval-feedback comparison on HotpotQA and MuSiQue. At 34.14--34.39M model tokens, broader question coverage lowers standard error by 33\% versus five reads and 12.6\% versus three trajectories. Archived nested and Q-only forecasts predict these allocations within 4.0\% and 3.5\%, respectively. Depth subsets establish no clear forecasting advantage beyond the two-trajectory audit. One-read variance penalties relative to the fitted optimum at the same token budget are 0--9.9\%, with substantial Pro uncertainty. Under recorded model fees, more questions beat more trajectories at search prices of \$0--1 per 1,000 requests; question-versus-read fee rankings remain unresolved. Temperature zero cuts answer disagreement from 14.3\% to 3.4\% while comparison precision stays similar. \par\medskip\noindentKeywords: Agentic RAG; Evaluation budget; Generalizability theory; Repeated sampling.

The ethical concept of fairness has recently been applied in machine learning (ML) settings to describe a wide range of constraints and objectives. When considering the relevance of ethical concepts to subset selection problems, the concepts of diversity and inclusion are additionally applicable in order to create outputs that account for social power and access differentials. We introduce metrics based on these concepts, which can be applied together, separately, and in tandem with additional fairness constraints. Results from human subject experiments lend support to the proposed criteria. Social choice methods can additionally be leveraged to aggregate and choose preferable sets, and we detail how these may be applied.

Supervised fine-tuning (SFT) is a commonly used technique to adapt large language models (LLMs) to downstream tasks. In practice, SFT on a full dataset is computationally expensive and sometimes suffers from overfitting or bias amplification. This facilitates the rise of data curation in SFT, which prioritizes the most valuable data to optimze. This work studies the online batch selection family that dynamically scores and filters samples during the training process. However, existing popular methods often (i) rely merely on the utility of data to select a subset while neglecting other crucial factors like diversity, (ii) rely on external resources such as reference models or validation sets, and (iii) incur extra training time over full-dataset training. To address these limitations, this work develops UDS (Utility-Diversity Sampling), a framework for efficient online batch selection in SFT. UDS leverages the nuclear norm of the logits matrix to capture both data utility and intra-sample diversity, while estimating inter-sample diversity through efficient low-dimensional embedding comparisons with a lightweight memory buffer of historical samples. Such a design eliminates the need for external resources and unnecessary backpropagation, securing computational efficiency. Experiments on multiple benchmarks demonstrate that UDS consistently outperforms state-of-the-art online batch selection methods under varying data budgets, and significantly reduces training time compared to full-dataset fine-tuning. Code is available at https://github.com/gfyddha/UDS.

Age-specific mortality improvements are non-uniform, neither across ages nor across time. We propose a two-step procedure to estimate the rates of mortality improvement (RMI) in age-specific death rates (ASDR) at ages 85 and above for ten European countries from 1950 to 2019. In the first step, we smooth the raw death counts and estimate ASDR using four different methods: one parametric (gamma-Gompertz-Makeham), two non-parametric (P-splines and PCLM), and a novel Bayesian procedure to handle fluctuations resulting from ages with zero death counts. We compare the goodness of fit of the four smoothing methods and calculate the year-to-year ASDR differences according to the best-fitting one. We fit a piecewise linear function to these differences in the second step. The slope in each linear segment captures the average RMI in the respective year range. For each age, we calculate the goodness of fit in the last linear segment to assess how informative the estimated RMI of current mortality change is. The estimated rates of mortality improvement or deterioration (RMI) can be used to make short-term social, health, and social planning, as well as more precise mortality forecasts.

Equivariance theory predicts that an architectural symmetry prior reduces sample complexity by a factor of |G|; this is widely cited but rarely measured as a scaling law with controls that separate the prior from its confounds. On a controlled C_n-symmetric task, we report three findings. First, a wrong-group control with identical orbit size and matched compute is worse than no constraint (joint pairwise CI [+0.79, +3.26] excludes zero, robust across estimators); misaligned constraint is actively harmful, not merely unhelpful. Second, an augmentation baseline equipped with test-time orbit averaging matches the equivariant model exactly -- bit-identical per-epoch validation curves across matched cells -- so the architecture-vs-augmentation gap is conditional on asymmetric test-time computation, not unconditional. Third, the relative exchange rate beta_diff = 1.28 is consistent in sign and order of magnitude with the theoretical 1.0 (single-level CI [+0.92, +2.05]); the more conservative two-level bootstrap (seeds x group sizes) widens this to [-0.63, +1.72], including zero, and a finer-N replication on a sqrt(2)-spaced grid is inconclusive (point estimate -0.82). The methodological contributions -- the relative-rate estimator that cancels the shared-difficulty confound, the wrong-group control, and a pre-specified failure taxonomy -- transfer to any inductive bias whose strength can be parameterised. Honest scoping: the primary estimator beta_diff was adopted post-hoc after the initial analysis revealed a positive-slope identifiability problem; the design was never externally pre-registered; and the headline number rests on an OLS slope over seven group sizes on a coarse N grid. This is an exploratory study, not a confirmatory measurement; the wrong-group result is the cleanest finding and the one we report with the most confidence. A registered replication on fresh seeds is future work.

We introduce IND-Eval, a public benchmark that organizes industrial time series across domains into source-specific forecasting tasks. Relative to established benchmarks such as GIFT-Eval, it emphasizes finer sampling resolutions and a greater prevalence of multivariate forecasting. Evaluating Chronos-2, TiRex-2, and TimesFM-3, we find that TimesFM-3 achieves the lowest source-balanced aggregate nMASE and nCRPS and leads seven of nine sources under each metric; source-specific exceptions reinforce the need for domain-representative evaluation for model selection. These findings also motivate improving domain alignment during pretraining, where real industrial data are often too scarce to close domain-specific gaps directly; we therefore investigate whether a domain's statistical structure can guide simulator design. In a case study on two offshore well-monitoring regimes, we improve a general simulator's coverage using an oscillator-augmented simulation pipeline. This lowers forecasting error in the target domain but reduces performance on the subset of GIFT-Eval with natively univariate targets. A 50/50 mixture of the general and augmented simulation recipes achieves the lowest error among the three training recipes for all four event-metric pairs in the case study while recovering most of the lost GIFT-Eval performance. Together, these results illustrate how domain-representative evaluation can guide model selection and the composition of simulated data while revealing a trade-off between specialization and generality.

Supervised learning datasets may contain multiple cues that explain the training set equally well, i.e., learning any of them would lead to the correct predictions on the training data. However, many of them can be spurious, i.e., lose their predictive power under a distribution shift and consequently fail to generalize to out-of-distribution (OOD) data. Recently developed "diversification" methods (Lee et al., 2023; Pagliardini et al., 2023) approach this problem by finding multiple diverse hypotheses that rely on different features. This paper aims to study this class of methods and identify the key components contributing to their OOD generalization abilities. We show that (1) diversification methods are highly sensitive to the distribution of the unlabeled data used for diversification and can underperform significantly when away from a method-specific sweet spot. (2) Diversification alone is insufficient for OOD generalization. The choice of the used learning algorithm, e.g., the model's architecture and pretraining, is crucial. In standard experiments (classification on Waterbirds and Office-Home datasets), using the second-best choice leads to an up to 20\% absolute drop in accuracy. (3) The optimal choice of learning algorithm depends on the unlabeled data and vice versa i.e. they are co-dependent. (4) Finally, we show that, in practice, the above pitfalls cannot be alleviated by increasing the number of diverse hypotheses, the major feature of diversification methods. These findings provide a clearer understanding of the critical design factors influencing the OOD generalization abilities of diversification methods. They can guide practitioners in how to use the existing methods best and guide researchers in developing new, better ones.

The composition of pre-training datasets for large language models (LLMs) remains largely undisclosed, hindering transparency and efforts to optimize data quality, a critical driver of model performance. Current data selection methods, such as natural language quality assessments, diversity-based filters, and classifier-based approaches, are limited by single-dimensional evaluation or redundancy-focused strategies. To address these gaps, we propose four dimensions to evaluate data quality: professionalism, readability, reasoning, and cleanliness. We further introduce Meta-rater,a multi-dimensional data selection method that integrates these dimensions with existing quality metrics through learned optimal weightings. Meta-rater employs proxy models to train a regression model that predicts validation loss, enabling the identification of optimal combinations of quality scores. Experiments demonstrate that Meta-rater doubles convergence speed for 1.3B parameter models and improves downstream task performance by 3.23, with advantages that scale to models as large as 7.2B parameters. Our work establishes that holistic, multi-dimensional quality integration significantly outperforms conventional single-dimension approaches, offering a scalable paradigm for enhancing pre-training efficiency and model capability. To advance future research, we release scripts, data, and models at https://github.com/opendatalab/Meta-rater.

Agent skill libraries are becoming routable software assets: a retrieved skill can contribute instructions, scripts, resource bindings, and execution assumptions to an agent. This makes retrieval failures more specific than broad irrelevance. A system can find the right capability family yet expose the wrong same-capability representative. We study this failure as same-capability risk-exposure retrieval. Each benchmark unit pairs a helpful skill with a query-specific risky sibling that shares the capability family but differs on an execution-controlling contract, such as the required resource, precondition, procedure, or artifact. We introduce SameCapRisk-Bench, an auditable benchmark with 1,190 skill-risk units and 1,686 evaluation query cases: 694 marked-sibling units under public library pressure and 496 hard role-flip units where the same two skills swap helpful/risky roles across paired queries. The release records admission evidence, cue/leakage checks, source hashes, family relations, and fixed candidate pools. The benchmark reports helpful ranking together with harmful sibling rate (HSR@K), the top-K exposure of the marked risky sibling. On this benchmark, public SkillRouter, SkillRet, and R3-Skill retrieve helpful skills at high Recall@3 (0.848--0.888) but also expose marked risky siblings frequently (HSR@3 0.346--0.372). A fully public score-and-cluster pipeline lowers HSR@3 to 0.128--0.182, with Recall@3 of 0.713--0.776. Under a benchmark-trained reference scorer, public text-cluster and controlled resolvers reach HSR@3 0.012 and 0.007; the latter attains Recall@3 0.833. Skill retrieval should therefore report both capability matching and same-family risk exposure, with HSR serving as a targeted exposure certificate for fixed skill libraries.

Ensuring equitable treatment (fairness) across protected attributes (such as gender or ethnicity) is a critical issue in machine learning. Most existing literature focuses on binary classification, but achieving fairness in regression tasks-such as insurance pricing or hiring score assessments-is equally important. Moreover, anti-discrimination laws also apply to continuous attributes, such as age, for which many existing methods are not applicable. In practice, multiple protected attributes can exist simultaneously; however, methods targeting fairness across several attributes often overlook so-called "fairness gerrymandering", thereby ignoring disparities among intersectional subgroups (e.g., African-American women or Hispanic men). In this paper, we propose a distance covariance regularisation framework that mitigates the association between model predictions and protected attributes, in line with the fairness definition of demographic parity, and that captures both linear and nonlinear dependencies. To enhance applicability in the presence of multiple protected attributes, we extend our framework by incorporating two multivariate dependence measures based on distance covariance: the previously proposed joint distance covariance (JdCov) and our novel concatenated distance covariance (CCdCov), which effectively address fairness gerrymandering in both regression and classification tasks involving protected attributes of various types. We discuss and illustrate how to calibrate regularisation strength, including a method based on Jensen-Shannon divergence, which quantifies dissimilarities in prediction distributions across groups. We apply our framework to the COMPAS recidivism dataset and a large motor insurance claims dataset.

This paper discusses pairing double/debiased machine learning (DDML) with stacking, a model averaging method for combining multiple candidate learners, to estimate structural parameters. In addition to conventional stacking, we consider two stacking variants available for DDML: short-stacking exploits the cross-fitting step of DDML to substantially reduce the computational burden and pooled stacking enforces common stacking weights over cross-fitting folds. Using calibrated simulation studies and two applications estimating gender gaps in citations and wages, we show that DDML with stacking is more robust to partially unknown functional forms than common alternative approaches based on single pre-selected learners. We provide Stata and R software implementing our proposals.

A probability forecast or probabilistic classifier is reliable or calibrated if the predicted probabilities are matched by ex post observed frequencies, as examined visually in reliability diagrams. The classical binning and counting approach to plotting reliability diagrams has been hampered by a lack of stability under unavoidable, ad hoc implementation decisions. Here we introduce the CORP approach, which generates provably statistically Consistent, Optimally binned, and Reproducible reliability diagrams in an automated way. CORP is based on non-parametric isotonic regression and implemented via the Pool-adjacent-violators (PAV) algorithm - essentially, the CORP reliability diagram shows the graph of the PAV- (re)calibrated forecast probabilities. The CORP approach allows for uncertainty quantification via either resampling techniques or asymptotic theory, furnishes a new numerical measure of miscalibration, and provides a CORP based Brier score decomposition that generalizes to any proper scoring rule. We anticipate that judicious uses of the PAV algorithm yield improved tools for diagnostics and inference for a very wide range of statistical and machine learning methods.

AI-generated imagery evolves faster than benchmark-specific detector evaluations, making a single score an incomplete account of generalization. This paper evaluates Neural Defend ARCAS 1B across benchmark families without benchmark-specific parameter updates. We retain native aggregation and supplement it with record-level measures, coverage accounting, and subgroup diagnostics. Each Results subsection identifies the release and evaluation population, reports the official metric, and describes observed error patterns. A combined analysis synthesizes shared patterns while preserving the distinction between native and pooled quantities. Cross-paper comparisons are restricted to aligned evidence; differences in release, population, preprocessing, training, or benchmark exposure are context rather than rank. The findings characterize performance on evaluated records, not universal reliability, calibration, attribution, or future adaptive attacks. By keeping benchmark-native outcomes distinct from pooled summaries, the study makes test-population, class-balance, and missing-record-coverage differences visible. It supports interpretation of detector results in research, platform-safety, and forensic-review settings, foregrounding traceable protocol conditions over claims or leaderboard comparisons.

Recent advancements in large language models (LLMs) have shifted focus toward scaling inference-time compute, improving performance without retraining the model. A common approach is to sample multiple outputs in parallel, and select one of these as the final output. However, work to date has focused on English and a handful of domains such as math and code. In contrast, we are most interested in techniques that generalize across open-ended tasks, formally verifiable tasks, and across languages. In this work, we study how to robustly scale inference-time compute for open-ended generative tasks in a multilingual, multi-task setting. Our findings show that both sampling strategy based on temperature variation and selection strategy must be adapted to account for diverse domains and varied language settings. We evaluate existing selection methods, revealing that strategies effective in English often fail to generalize across languages. We propose novel sampling and selection strategies specifically adapted for multilingual and multi-task inference scenarios, and show they yield notable gains across languages and tasks. In particular, our combined sampling and selection methods lead to an average +6.8 jump in win-rates for our 8B models on m-ArenaHard-v2.0 prompts, against proprietary models such as Gemini. At larger scale, Command-A (111B model) equipped with our methods, shows +9.0 improvement in win-rates on the same benchmark with just five samples against single-sample decoding, a substantial increase at minimal cost. Our results underscore the need for language- and task-aware approaches to inference-time compute, aiming to democratize performance improvements in underrepresented languages.

We present t_0, a family of open-weights foundation models for forecasting with multivariate context. We release its first two members: t0-alpha and t0-beta, respectively 102M and 256M parameters. Both condition their forecasts on target history, past covariates, and known-future covariates, without task-specific retraining. Their transformer layers alternate attention along time and across variates. They produce probabilistic forecasts through quantile predictions. Pretraining combines curated public data with synthetic generator families constructed to contain covariate-to-target dependencies. On GIFT-Eval, t0-alpha reaches an aggregate CRPS of 0.4941, and t0-beta a CRPS of 0.4738 and a MASE of 0.6865, third on both and within 4.0% of the best zero-shot TSFM. On fev-bench they score 42.2 and 46.7 in skill, the latter third again and 2.0 points behind the leader. We analyze t0-alpha in depth. Known-future covariates raise its skill by 6.3 percentage points across 30 tasks. The report also examines its calibration, its rollout strategy on long horizons, and its robustness to missing data. On the Victoria electricity-demand benchmark, t0-beta is among the most accurate models with a context of nearly a year. In an independent Macrocosm evaluation of hourly ERCOT prices over 29 months, both cut the MAE of the lagged-price baseline by 38%.

We study a capability the dominant paradigm in synthetic tabular data does not provide: exact satisfaction of a declared analytical outcome with no source data. Imitation methods (copulas, GANs, diffusion) learn a real distribution and sample from it, and are judged on fidelity to real data. A large, practical class of needs is different: generating data with no source data ("cold start") that reproduces a declared outcome (a revenue curve, a churn rate, a group share) across a relational schema. Off-the-shelf imitation tools offer no interface for such targets, and no sampler can hit an exact aggregate, because sampling has variance. On a real public dataset, off-the-shelf learned synthesizers trained on that very data miss the declared monthly aggregate by 74 to 86 percent; a per-period steelman cuts the miss to about 19 percent and still cannot reach 0; a closed-form generator reaches exactly 0. We name this task outcome-conformant synthesis, argue its evaluation axis is conformance rather than fidelity, and show the two axes are orthogonal. We contribute: (1) a formal account showing a widely-used family of exact-aggregate generators is exactly conditional-sum sampling of a Gamma population (via Lukacs' characterization), with closed-form exactness, a closed-form marginal CV, and scale-invariance; a controlled experiment maps the boundary, enforcing the exact aggregate costs at most 0.006 in 1-Wasserstein distance to an arbitrary external marginal, the rest being shape-family mismatch; (2) SpecBench, to our knowledge the first benchmark to measure conformance to analytical outcomes for cold-start relational synthesis; and (3) a closed-form, deterministic reference system. Exact aggregation alone is trivial; the contribution is conformance jointly with closed-form marginals, integrity, determinism, and zero source data. We concede fidelity to imitation where real data exists.

Obtaining high-quality generations in modern LLMs has largely been framed as a selection problem: identifying a single winning generation from a diverse pool of N samples, the Best-of-N (BoN). Yet, this approach is inherently zero-sum, discarding diverse and potentially useful information from the pool. Instead, we explore a collaborative setup, where all candidates can potentially contribute to the final winning generation. To this end, we propose Fusion-of-N (FusioN): a method that uses a general LLM judge to synthesize the most informative elements of each sample into a single final answer. We compare FusioN to BoN in two settings, (i) test-time scaling, where we sample and aggregate from a single model at test-time (ii) synthetic data generation, where we fuse samples from a pool of diverse teachers to improve a student model. We extensively benchmark both setups across 11 languages, 3 diverse tasks and varying model scales. Across the bench, FusioN consistently outperforms BoN showing versatility and robustness both in test-time scaling and in downstream gains from synthetic data generation. We also perform extensive analysis on FusioN, where it shows surprising strengths and robustness under challenging settings. These results show that we should shift how we think about evaluating and utilizing LLM generations from a monolithic measure of quality, to embracing their polylithic nature. This shift allows us to integrate diverse strengths, unlock latent potential, and achieve improvements that were previously inaccessible through selection alone.

Demographic synthetic survey panels are often validated by matching aggregate answers to published surveys. We test what that certificate establishes across six multiselect batteries from four survey organisations in three countries. The headline analysis is restricted to three instruments whose synthetic cohort and human target share the stated population frame; three other batteries remain sensitivity analyses. The response contract dominates measured fidelity. In the aligned instruments, committed sets leave 66 of 128 model-battery option slots empty in panels of up to 500 respondents, versus 0 of 128 under per-option probability elicitation. Across eight uncapped model-instrument comparisons, probabilities reduce option-marginal MAE by 4.53 to 7.30 points. The capped instrument reverses on two models until the vectors are projected onto its stated maximum. These are measurement effects: human targets are realised check-all responses, whereas the vectors are latent inclusion propensities. Published marginal agreement also fails to discriminate respondent simulation from direct population estimation. On nine aligned model-battery pairs, a no-persona population-prevalence query averages 6.27 MAE versus 12.39 for committed panels and wins all nine comparisons. Constraint-aware probability vectors average 5.34 and beat the query on four of nine, so the baseline challenges the validation criterion rather than proving direct estimation uniformly best. On three unpublished demographic cells, neither approach beats reciting the national distribution. Population-marginal agreement is therefore evidence about an elicitation contract and an estimand obtainable without simulated respondents, not evidence of individual simulation.

Pre-training data mixtures are commonly tuned by running small-scale experiments and extrapolating to the target training budget. When high-quality data is scarce and must be repeated, this extrapolation frequently fails, but the source of the failure has not been isolated. We show that a primary culprit is a repetition mismatch: because high-quality datasets are small, their repetition rate changes as the training budget grows, shifting the optimal mixture in ways that small-scale proxy experiments do not anticipate. A subsampling procedure that matches the target repetition rate controls for this effect. In a two-source setting combining limited high-quality data with web crawl, a single repetition-controlled experiment using only 1/16 of the target tokens recovers a mixture within 0.05 of the optimum for a 757M parameter model, compared to an error of 0.75 without repetition control. Achieving comparable accuracy without repetition control requires three to four horizons, consuming 44 to 94% of the target token budget. With three data sources, the larger mixture space requires more than a single experiment to constrain, but the approach remains effective: at the 757M scale, just two repetition-controlled horizons recover the optimal mixture, outperforming baselines that instead require the full two-source experiments to construct. Our results reveal that repetition dynamics, not scale alone, shape whether small-scale mixture experiments generalize. More broadly, they suggest that data repetition deserves treatment as a first-class variable in mixture optimization, rather than an inconvenient side effect of limited data.

Reinforcement learning with verifiable rewards has rapidly advanced reasoning in vision--language models. However, for chest X-ray report generation, the standard rewards (i.e. exact-match accuracy and step-level processes) are incompatible because the reports consist of unordered and orthogonal findings, rather than a causal reasoning chain. We address this gap with a set-based view: each report is split into sentences and embedded by a frozen sentence transformer, yielding unordered embedding sets. We propose the use of set-to-set distances between generated and reference embeddings as continuous, permutation-invariant rewards. Across two datasets and three vision--language models (Qwen3-VL-2B/4B, Gemma3-4B), post-training with set-to-set distance based rewards via GRPO consistently outperforms supervised fine-tuning and exact-match GRPO on all headline metrics (BERTScore, RadGraph F1 and CheXbert F1 by average \%6.80, \%7.82 and \%4.45 relative improvements respectively). The same set distances also enable test-time best-of-N selection: scoring candidates by their distance to training-report embeddings outperforms random selection on our trained models as well as three closed-source LLMs (Mistral-Small, Gemini-2.5 Flash-Lite, GPT-4o-mini) with on average \%16.4 relative improvement on BERTScore. Used as a streaming signal, they support a more efficient form of test-time scaling: pruning low-scoring candidates mid-generation reduces generated tokens by over 50\% while preserving the Findings quality of full best-of-N selection. Together these results establish set-distance rewards as a unified signal for both post-training and test-time scaling in chest X-ray report generation. Our code is publicly https://anonymous.4open.science/r/Set-Distance-Rewards-CXR-BFDA{available}.

While the field of Quality-Diversity (QD) has grown into a distinct branch of stochastic optimization, a few problems, in particular locomotion and navigation tasks, have become de facto standards. Are such benchmarks sufficient? Are they representative of the key challenges faced by QD algorithms? Do they provide the ability to focus on one particular challenge by properly disentangling it from others? Do they have much predictive power in terms of scalability and generalization? Existing benchmarks are not standardized, and there is currently no MNIST equivalent for QD. Inspired by recent works on Reinforcement Learning benchmarks, we argue that the identification of challenges faced by QD methods and the development of targeted, challenging, scalable but affordable benchmarks is an important step. As an initial effort, we identify three problems that are challenging in sparse reward settings, and propose associated benchmarks: (1) Behavior metric bias, which can result from the use of metrics that do not match the structure of the behavior space. (2) Behavioral Plateaus, with varying characteristics, such that escaping them would require adaptive QD algorithms and (3) Evolvability Traps, where small variations in genotype result in large behavioral changes. The environments that we propose satisfy the properties listed above.

LLM agent systems are built by stacking scaffolding components (planning, tools, memory, self-reflection, retrieval) assuming more is better. We study cross-component interference (CCI): degradation when components interact destructively. We run a full factorial experiment over all 2^5=32 subsets of five components on HotpotQA and GSM8K with Llama-3.1-8B/70B (96 conditions, up to 10 seeds). The All-In system is consistently suboptimal: on HotpotQA, a single-tool agent surpasses All-In by 32% (F1 0.233 vs 0.177, p=0.023); on GSM8K, a 3-component subset beats All-In by 79% (0.43 vs 0.24, p=0.010). Optimal component count is task-dependent (k*=1-4) and scale-sensitive: at 70B, combinations that hurt at 8B provide gains, though All-In still trails the best subset. We fit a main-effects regression (R^2=0.916, adj-R^2=0.899, LOOCV=0.872), compute exact Shapley values, and find 183/325 submodularity violations (56.3%), showing greedy selection is unreliable. A three-body synergy among Tool Use, Self-Reflection, and Retrieval (INT_3=+0.175, 95% CI [+0.003,+0.351]) is reported as exploratory. CCI replicates across model families (Qwen2.5) and is robust to prompt paraphrasing. Our findings suggest maximally-equipped agent defaults should be replaced by task-specific subset selection via interaction-aware analysis.

Benchmark contamination is diagnosed with n-gram overlap, likelihood-based membership inference, or canary strings, and each needs something usually unavailable: the training corpus, a well-chosen test statistic, or foresight at release. A recent alternative reads it off a linear probe on internal activations. We show the natural way to do this does not work, specify one that survives measurement, then find that the correction making it work carries more variance than the null it is tested against. The protocol reports a zero-sum contrast on the depth profile of probe accuracy, recentred on a level-matched placebo baseline, tested against a label-permutation null, with the reference set twice the size of the suspect set. Each choice replaces a simpler alternative we rejected on measurement. Reporting the level of excess separability rather than its shape makes the false positive rate track the size of the analyst's own control set, 0.03 to 0.99 under a true null. Contrasting against a flat depth profile rejects a true null 0.72 of the time when surface decodability rises with depth, and loses all power when it falls. On real transformers the protocol fails a test the simulations did not pose. The recentring subtracts an estimate, and the permutation null holds it fixed. Re-estimated across split seeds on four audits of contaminated checkpoints, its standard deviation is 1.30 to 1.56 times the null's own in every arm: what is subtracted to remove a bias is more variable than what it corrects. The one nominally significant result, p = 0.0075, becomes 0.0745 once that variance is propagated, and no verdict is issued. The simulations missed this because their surface key is the covariate driving item variation; on real text it is a proxy, and degrading key quality in simulation reproduces it. We add a companion measurement and a widened null. No arm shows contamination.

The increasing adoption of econometric and machine-learning approaches by empirical researchers has led to a widespread use of one data collection method: web scraping. Web scraping refers to the use of automated computer programs to access websites and download their content. The key argument of this paper is that na\"ive web scraping procedures can lead to sampling bias in the collected data. This article describes three sources of sampling bias in web-scraped data. More specifically, sampling bias emerges from web content being volatile (i.e., being subject to change), personalized (i.e., presented in response to request characteristics), and unindexed (i.e., abundance of a population register). In a series of examples, I illustrate the prevalence and magnitude of sampling bias. To support researchers and reviewers, this paper provides recommendations on anticipating, detecting, and overcoming sampling bias in web-scraped data.

Standard methods for detecting discontinuities in conditional means are not applicable to outcomes that are complex, non-Euclidean objects like distributions, networks, or covariance matrices. This article develops a nonparametric test for jumps in conditional means when outcomes lie in a non-Euclidean metric space. Using local Fr\'echet regressionx2014which generalizes standard regression to metric-space valued datax2014the method estimates a mean path on either side of a candidate cutoff, extending existing k-sample tests to a flexible regression setting. Key theoretical contributions include a central limit theorem for the local estimator of the conditional Fr\'echet variance and the asymptotic validity and consistency of the proposed test. Simulations confirm nominal size control and robust power in finite samples. Two applications demonstrate the method's value by revealing effects invisible to scalar-based tests. First, I detect a sharp change in work-from-home compositions at Washington State's income threshold for non-compete enforceability during COVID-19, highlighting remote work's role as a bargaining margin. Second, I find that countries restructure their input-output networks after losing preferential US trade access. These findings underscore that analyzing regression functions within their native metric spaces can reveal structural discontinuities that scalar summaries would miss.

The Model Context Protocol (MCP), introduced by Anthropic in November 2024, defines a standardized interface for connecting large language models (LLMs) to external tools, data sources, and services. Within months of release, hundreds of community-built MCP servers appeared on GitHub, but no software-maintenance literature has yet described how the ecosystem is being structured in production. This industry experience paper catalogues five recurring MCP server architectural patterns observed across an enumerated corpus of fifteen independently developed servers (five production servers from the ANSYR voice AI platform plus ten public servers from the official MCP registry): Resource Gateway, Tool Orchestrator, Stateful Session Server, Proxy Aggregator, and Domain-Specific Adapter. Each pattern is described in the structured form of Gamma et al.: context, problem, solution, and consequences. We also document four anti-patterns and a set of cross-cutting concerns around authentication, versioning, and observability. The quantitative evaluation contributes three measurements: inter-rater reliability of the taxonomy across two independent LLM raters on 54 held-out servers (Cohen's kappa = 0.76), which also localizes three pattern-boundary ambiguities; transport overhead measured end-to-end on loopback and modeled for cross-host paths; and a tool-count study showing tool-selection accuracy drops below 90% between 10 and 15 tools per context for Claude Haiku 4.5 and between 20 and 30 tools for Sonnet 4. Code, corpus, and prompts are released as a replication package.

Self-improving LLM systems propose changes to themselves and keep those that score better on a small evaluation set. We treat this keep-if-better step as selection under measurement noise, model the correlated errors of the candidates in a single decision, and study empirically what happens when the evaluation set is reused. In runs where Qwen models rewrite their own instructions and every candidate is also scored on 600 held-out items, most proposals after the first are harmful, and the model gives the size of the winner's curse of a generation's best candidate. With a prior from a separate pilot, it matches the average overstatement of first-generation commits in native loops, though not setting by setting. In a pre-registered study, the final selection-set score of greedy loops exceeded held-out accuracy by 13 to 20 points with 16 selection items and by 1 to 5 points with 256. Held-out gains grew with the selection set on TREC but not on GSM8K, and the tested acceptance rules did not beat greedy acceptance over whole runs. Gains measured on the selection set also exceeded held-out gains when a current model refined a competent instruction, and in the validation scores of GEPA and MIPROv2. Scoring the starting and the current instruction on 64 items never used for selection removes the average bias of a loop's reported gain, but single estimates remain off by about 6 points. Self-improvement studies should report held-out gains with their uncertainty.

Serving an answer from a large language model requires deciding when to abstain, yet a verifier's ranking accuracy alone does not determine the error rate among served answers. We introduce PriceCheck, which builds a compact family of decision rules from label-free checks such as re-solving a problem. Each check has a price: its agreement rates on correct and incorrect answers and its cost per run. Prices fitted on a small, class-enriched labelled set compose into predictions of a schedule's coverage and cost, guiding which checks to run and when to stop. A calibration test then selects a schedule at a stated selective-risk target. In mathematics, the selected schedules serve 76.1% of answers on average and keep held-out selective risk below 1.5% on all 15 splits. Under the shared testing protocol, PriceCheck serves more answers at that target than reward models, a prompted judge, the generator's confidence and a trained correctness classifier. At matched coverage, it keeps the fewest wrong answers among these scorers. Across 118 diagnostic schedules, price-based coverage predictions have a rank correlation of 0.97 with observed coverage. These results show that choosing how checks are combined and stopped matters alongside how well a verifier ranks answers. Code is available at https://github.com/js-lee-AI/PriceCheck.

We introduce a new class of algorithms, Stochastic Generalized Method of Moments (SGMM), for estimation and inference on (overidentified) moment restriction models. Our SGMM is a novel stochastic approximation alternative to the popular Hansen (1982) (offline) GMM, and offers fast and scalable implementation with the ability to handle streaming datasets in real time. We establish the almost sure convergence, and the (functional) central limit theorem for the inefficient online 2SLS and the efficient SGMM. Moreover, we propose online versions of the Durbin-Wu-Hausman and Sargan-Hansen tests that can be seamlessly integrated within the SGMM framework. Extensive Monte Carlo simulations show that as the sample size increases, the SGMM matches the standard (offline) GMM in terms of estimation accuracy and gains over computational efficiency, indicating its practical value for both large-scale and online datasets. We demonstrate the efficacy of our approach by a proof of concept using two well known empirical examples with large sample sizes.

Distilling advanced Large Language Models' instruction-following capabilities into smaller models using a selected subset has become a mainstream approach in model training. While existing synthetic instruction data selection strategies rely mainly on single-dimensional signals (i.e., reward scores, model perplexity), they fail to capture the complexity of instruction-following across diverse fields. Therefore, we investigate more diverse signals to capture comprehensive instruction-response pair characteristics and propose three foundational metrics that leverage Multi-LLM wisdom, informed by (1) diverse LLM responses and (2) reward model assessment. Building upon base metrics, we propose CrowdSelect, an integrated metric incorporating a clustering-based approach to maintain response diversity. Our comprehensive experiments demonstrate that our foundation metrics consistently improve performance across 4 base models on MT-bench and Arena-Hard. CrowdSelect, efficiently incorporating all metrics, achieves state-of-the-art performance in both Full and LoRA fine-tuning, showing improvements of 4.81% on Arena-Hard and 11.1% on MT-bench with Llama-3.2-3b-instruct. We hope our findings will bring valuable insights for future research in this direction. Code are available at https://github.com/listentm/crowdselect.

Supervised fine-tuning (SFT) data selection is commonly formulated as instance ranking: score each example and retain a top-k subset. However, effective SFT training subsets are often produced through ordered curation recipes, where filtering, mixing, and deduplication operators jointly shape the final data distribution. We formulate this problem as fixed-pool data recipe search: given a raw instruction pool and a library of grounded operators, the goal is to discover an executable recipe that constructs a high-quality selected subset under a limited budget of full SFT evaluations, without generating, rewriting, or augmenting training samples. We introduce AutoSelection, a two-layer solver that decouples fixed-pool materialization based on cached task-, data-, and model-side signals from expensive full evaluation, using warmup probes, realized subset states, local recipe edits, Gaussian-process-assisted ranking, and stagnation-triggered reseeding. Experiments on a 90K instruction pool show that AutoSelection achieves the strongest in-distribution reasoning average across three base models, outperforming full-data training, random recipe search, random top-k, and single-operator selectors. Additional Out-of-distribution graph-reasoning results, search-stability analyses, structural ablations, and 1.5B-to-7B transfer checks further show that recipe structure matters beyond individual selection operators. Code is available at https://github.com/w253/AutoSelection.

Test-time scaling can improve model performance by aggregating stochastic reasoning trajectories. However, achieving sample-efficient test-time self-consistency under a limited budget remains an open challenge. We introduce PETS (Principled and Efficient Test-TimeSelf-Consistency), which initiates a principled study of trajectory allocation through an optimization framework. Central to our approach is the self-consistency rate, a new measure defined as agreement with the infinite-budget majority vote. This formulation makes sample-efficient test-time allocation theoretically grounded and amenable to rigorous analysis. We study both offline and online settings. In the offline regime, where all questions are known in advance, we connect trajectory allocation to crowdsourcing, a classic and well-developed area, by modeling reasoning traces as workers. This perspective allows us to leverage rich existing theory, yielding theoretical guarantees and an efficient majority-voting-based allocation algorithm. In the online streaming regime, where questions arrive sequentially and allocations must be made on the fly, we propose a novel method inspired by the offline framework. Our approach adapts budgets to question difficulty while preserving strong theoretical guarantees and computational efficiency. Experiments show that PETS consistently outperforms uniform allocation. On GPQA, PETS achieves perfect self-consistency in both settings while reducing the sampling budget by up to 75% (offline) and 55% (online) relative to uniform allocation. Code is available at https://github.com/ZDCSlab/PETS.

Realistic text-to-SQL workflows often require joining multiple tables. As a result, accurately retrieving the relevant set of tables becomes a key bottleneck for end-to-end performance. We study an open-book setting where queries must be answered over large, heterogeneous table collections pooled from many sources, without clean scoping signals such as database identifiers. Here, dense retrieval (DR) achieves high recall but returns many distractors, while join-aware alternatives often rely on extra assumptions and/or incur high inference overhead. We propose CORE-T, a scalable, training-free framework that enriches tables with LLM-generated purpose metadata and pre-computes a lightweight table-compatibility cache. At inference time, DR returns top-K candidates; a single LLM call selects a coherent, joinable subset, and a two-step additive adjustment stage restores strongly compatible tables. Across Bird, Spider, MMQA, and Beaver, CORE-T improves over DR by up to 22.7 points in table-selection F1 while returning up to 40% fewer tables, and by up to 24.4 points in multi-table execution accuracy, and uses 1.64-4.20x fewer total selection tokens than LLM-intensive baselines.

Directly learning from examples of random difficulty levels is often challenging for both humans and machine learning models. A more effective strategy involves exposing learners to examples in a progressive order, from easy to difficult. Curriculum Learning (CL) has been proposed to implement this strategy in machine learning model training. However, two key challenges persist in CL framework design: defining the difficulty of training data and determining the appropriate amount of data to input at each training step. This paper presents a Psychology-based Unified Dynamic Framework for Curriculum Learning (PUDF), drawing inspiration from psychometrics. We quantify the difficulty of training data by applying Item Response Theory (IRT) to responses from Artificial Crowds (AC). This theory-driven IRT-AC approach leads to global (i.e., model-independent) and interpretable difficulty values. Leveraging IRT, we propose a Dynamic Data Selection via Model Ability Estimation (DDS-MAE) strategy to schedule the appropriate amount of data during model training. Since our difficulty labeling and model ability estimation are based on a consistent theory, namely IRT, their values are comparable within the same scope, potentially leading to a faster convergence compared to the other CL methods. Experimental results demonstrate that fine-tuning pre-trained language models with PUDF enhances their performance on the GLUE benchmark. Moreover, PUDF surpasses other state-of-the-art (SOTA) CL methods on the GLUE benchmark. We further explore the components of PUDF, namely the difficulty measurer (IRT-AC) and the training scheduler (DDS-MAE) qualitatively and quantitatively. Lastly, we conduct an ablation study to clarify which components of PUDF contribute to faster convergence and higher accuracy.

Debates about whether development projects improve living conditions persist, partly because observational estimates can be biased by incomplete adjustment and because reliable outcome data are scarce at the neighborhood level. We address both issues in a continent-scale, sector-specific evaluation of Chinese and World Bank projects across 9,899 neighborhoods in 36 African countries (2002 to 2013), representative of 88% of the population. First, we use a recent dataset that measures living conditions with a machine-learned wealth index derived from contemporaneous satellite imagery, yielding a consistent panel of 6.7 km square mosaics. Second, to strengthen identification, we proxy officials' map-based placement criteria using pre-treatment daytime satellite images and fuse these with rich tabular covariates to estimate funder- and sector-specific ATEs via inverse-probability weighting. Incorporating imagery systematically shrinks effects relative to tabular-only models, indicating prior work likely overstated benefits. On average, both donors raise wealth, with larger gains for China; sector extremes in our sample include Trade and Tourism for the World Bank (+6.27 IWI points), and Emergency Response for China (+14.32). Assignment-mechanism analyses show World Bank placement is generally more predictable from imagery alone, as well as from tabular covariates. This suggests that Chinese project placements are more driven by non-visible, political, or event-driven factors than World Bank placements. To probe residual concerns about selection on observables, we also estimate within-neighborhood (unit) fixed-effects models at a spatial resolution about 450 times finer than prior fixed effects analyses, leveraging the computer-vision-imputed IWI panels; these deliver smaller but directionally consistent effects.

We introduce a rank-statistic approximation of f-divergences that avoids explicit density-ratio estimation by working directly with the distribution of ranks. For a resolution parameter K, we map the mismatch between two univariate distributions μ and ν to a rank histogram on { 0, ldots, K} and measure its deviation from uniformity via a discrete f-divergence, yielding a rank-statistic divergence estimator. We prove that the resulting estimator of the divergence is monotone in K, is always a lower bound of the true f-divergence, and we establish quantitative convergence rates for Ktoinfty under mild regularity of the quantile-domain density ratio. To handle high-dimensional data, we define the sliced rank-statistic f-divergence by averaging the univariate construction over random projections, and we provide convergence results for the sliced limit as well. We also derive finite-sample deviation bounds along with asymptotic normality results for the estimator. Finally, we empirically validate the approach by benchmarking against neural baselines and illustrating its use as a learning objective in generative modeling experiments.

What does it mean for an algorithm to be biased? In U.S. law, unintentional bias is encoded via disparate impact, which occurs when a selection process has widely different outcomes for different groups, even as it appears to be neutral. This legal determination hinges on a definition of a protected class (ethnicity, gender, religious practice) and an explicit description of the process. When the process is implemented using computers, determining disparate impact (and hence bias) is harder. It might not be possible to disclose the process. In addition, even if the process is open, it might be hard to elucidate in a legal setting how the algorithm makes its decisions. Instead of requiring access to the algorithm, we propose making inferences based on the data the algorithm uses. We make four contributions to this problem. First, we link the legal notion of disparate impact to a measure of classification accuracy that while known, has received relatively little attention. Second, we propose a test for disparate impact based on analyzing the information leakage of the protected class from the other data attributes. Third, we describe methods by which data might be made unbiased. Finally, we present empirical evidence supporting the effectiveness of our test for disparate impact and our approach for both masking bias and preserving relevant information in the data. Interestingly, our approach resembles some actual selection practices that have recently received legal scrutiny.

The Beta kernel estimator offers a theoretically superior alternative to the Gaussian kernel for unit interval data, eliminating boundary bias without requiring reflection or transformation. However, its adoption remains limited by the lack of a reliable bandwidth selector; practitioners currently rely on iterative optimization methods that are computationally expensive and prone to instability. We derive the ``Beta Reference Rule,'' a fast, closed-form bandwidth selector based on the unweighted Asymptotic Mean Integrated Squared Error (AMISE) of a beta reference distribution. To address boundary integrability issues, we introduce a principled heuristic for U-shaped and J-shaped distributions. By employing a method-of-moments approximation, we reduce the bandwidth selection complexity from iterative optimization to O(1). Extensive Monte Carlo simulations demonstrate that our rule matches the accuracy of numerical optimization while delivering a speedup of over 35,000 times. Real-world validation on socioeconomic data shows that it avoids the ``vanishing boundary'' and ``shoulder'' artifacts common to Gaussian-based methods. We provide a comprehensive, open-source Python package to facilitate the immediate adoption of the Beta kernel as a drop-in replacement for standard density estimation tools.

Evaluating an AI system requires disaggregated assessment, as performance varies across domains such as benchmark task types or conversation types in deployed agents. Exhaustive testing is expensive, so evaluation rests on a sample of labeled units. We treat the evaluation set as a finite population and seek accurate point and interval estimates of each domain mean. Direct estimators, including prediction-powered inference (PPI), use only a domain's own labels and are imprecise where labels are few. Small area estimation addresses this problem, and we build on it to develop an integrated workflow for estimation and validation. For estimation, we propose prediction-powered smoothing (PP-S), a Bayesian model fit to each domain's prediction-powered estimate, with an extension that borrows strength across a reporting taxonomy (PP-TS). For validation, we derive a new, approximately unbiased design-based cross-validation score for choosing among direct and smoothed estimators. We study a curated benchmark with verifiable grading and deployed agent traffic graded by humans, each with every outcome observed. In both, the proposed estimators improve on the direct estimators in point and interval estimation, with near-nominal coverage. At the same sampling budget, our score selects as well as an independent validation sample does and estimates the selected estimator's error far more accurately.