Daily Papers

While the rapid expansion of data centers poses challenges for power grids, it also offers new opportunities as potentially flexible loads. Existing power system research often abstracts data centers as aggregate resources, while computer system research primarily focuses on optimizing GPU energy efficiency and largely ignores the grid impacts of optimized GPU power consumption. To bridge this gap, we develop a GPU-to-Grid framework that couples device-level GPU control with power system objectives. We study distribution-level voltage regulation enabled by flexibility in LLM inference, using batch size as a control knob that trades off the voltage impacts of GPU power consumption against inference latency and token throughput. We first formulate this problem as an optimization problem and then realize it as an online feedback optimization controller that leverages measurements from both the power grid and GPU systems. Our key insight is that reducing GPU power consumption alleviates violations of lower voltage limits, while increasing GPU power mitigates violations near upper voltage limits in distribution systems; this runs counter to the common belief that minimizing GPU power consumption is always beneficial to power grids.

Objectives: While Large Language Models (LLMs) have been widely used to assist clinicians and support patients, no existing work has explored dialogue systems for standard diagnostic interviews and assessments. This study aims to bridge the gap in mental healthcare accessibility by developing an LLM-powered dialogue system that replicates clinician behavior. Materials and Methods: We introduce TRUST, a framework of cooperative LLM modules capable of conducting formal diagnostic interviews and assessments for Post-Traumatic Stress Disorder (PTSD). To guide the generation of appropriate clinical responses, we propose a Dialogue Acts schema specifically designed for clinical interviews. Additionally, we develop a patient simulation approach based on real-life interview transcripts to replace time-consuming and costly manual testing by clinicians. Results: A comprehensive set of evaluation metrics is designed to assess the dialogue system from both the agent and patient simulation perspectives. Expert evaluations by conversation and clinical specialists show that TRUST performs comparably to real-life clinical interviews. Discussion: Our system performs at the level of average clinicians, with room for future enhancements in communication styles and response appropriateness. Conclusions: Our TRUST framework shows its potential to facilitate mental healthcare availability.

This paper presents a critical and practical approach to the evolution of distribution network reconfiguration algorithms, tracing their development from foundational heuristic methods introduced in 1975 to contemporary state-of-the-art techniques. The article systematically reviews seven different methodologies, including classical heuristic algorithms (Merlin, Baran, and others), advanced meta-heuristic methodologies (particle swarm optimization (PSO) and genetic algorithms), and purely mathematical approaches (MILP-based), analyzing their theoretical foundations, implementation strategies, computational complexity, and performance metrics based on extensive literature review and our own empirical testing. Each methodology is assessed through standardized test systems, considering multiple objectives such as power loss minimization and voltage profile improvement. The comparative analysis reveals the strengths and limitations of each approach under various network conditions and operational constraints. Furthermore, this work provides significant value to the research community by offering an open-source repository containing documented implementations of all reviewed algorithms. This resource facilitates accessibility for newcomers to the field, promotes reproducible research, and accelerates the development of next-generation distribution network optimization solutions. The repository includes comprehensive documentation, test cases, and performance benchmarks.

Model predictive control (MPC)-based energy management systems (EMS) are essential for ensuring optimal, secure, and stable operation in microgrids with high penetrations of distributed energy resources. However, due to the high computational cost for the decision-making, the conventional MPC-based EMS typically adopts a simplified integrated-bus power balance model. While this simplification is effective for small networks, large-scale systems require a more detailed branch flow model to account for the increased impact of grid power losses and security constraints. This work proposes an efficient and reliable MPC-based EMS that incorporates power-loss effects and grid-security constraints. %, while adaptively shaping the battery power profile in response to online renewable inputs, achieving reduced operational costs. It enhances system reliability, reduces operational costs, and shows strong potential for online implementation due to its reduced computational effort. Specifically, a second-order cone program (SOCP) branch flow relaxation is integrated into the constraint set, yielding a convex formulation that guarantees globally optimal solutions with high computational efficiency. Owing to the radial topology of the microgrid, this relaxation is practically tight, ensuring equivalence to the original problem. Building on this foundation, an online demand response (DR) module is designed to further reduce the operation cost through peak shaving. To the best of our knowledge, no prior MPC-EMS framework has simultaneously modeled losses and security constraints while coordinating flexible loads within a unified architecture. The developed framework enables secure operation with effective peak shaving and reduced total cost. The effectiveness of the proposed method is validated on 10-bus, 18-bus, and 33-bus systems.

The DC Optimal Power Flow (DC-OPF) problem is fundamental to power system operations, requiring rapid solutions for real-time grid management. While traditional optimization solvers provide optimal solutions, their computational cost becomes prohibitive for large-scale systems requiring frequent recalculations. Machine learning approaches offer promise for acceleration but often struggle with constraint satisfaction and cost optimality. We present a novel two-stage learning framework that combines physics-informed Graph Neural Networks (GNNs) with Continuous Flow Matching (CFM) for solving DC-OPF problems. Our approach embeds fundamental physical principles--including economic dispatch optimality conditions, Kirchhoff's laws, and Karush-Kuhn-Tucker (KKT) complementarity conditions--directly into the training objectives. The first stage trains a GNN to produce feasible initial solutions by learning from physics-informed losses that encode power system constraints. The second stage employs CFM, a simulation-free continuous normalizing flow technique, to refine these solutions toward optimality through learned vector field regression. Evaluated on the IEEE 30-bus system across five load scenarios ranging from 70\% to 130\% nominal load, our method achieves near-optimal solutions with cost gaps below 0.1\% for nominal loads and below 3\% for extreme conditions, while maintaining 100\% feasibility. Our framework bridges the gap between fast but approximate neural network predictions and optimal but slow numerical solvers, offering a practical solution for modern power systems with high renewable penetration requiring frequent dispatch updates.

Hydrogen-electrical microgrids are increasingly assuming an important role on the pathway toward decarbonization of energy and transportation systems. This paper studies networked hydrogen-electrical microgrids planning (NHEMP), considering a critical but often-overlooked issue, i.e., the demand-inducing effect (DIE) associated with infrastructure development decisions. Specifically, higher refueling capacities will attract more refueling demand of hydrogen-powered vehicles (HVs). To capture such interactions between investment decisions and induced refueling demand, we introduce a decision-dependent uncertainty (DDU) set and build a trilevel stochastic-robust formulation. The upper-level determines optimal investment strategies for hydrogen-electrical microgrids, the lower-level optimizes the risk-aware operation schedules across a series of stochastic scenarios, and, for each scenario, the middle-level identifies the "worst" situation of refueling demand within an individual DDU set to ensure economic feasibility. Then, an adaptive and exact decomposition algorithm, based on Parametric Column-and-Constraint Generation (PC&CG), is customized and developed to address the computational challenge and to quantitatively analyze the impact of DIE. Case studies on an IEEE exemplary system validate the effectiveness of the proposed NHEMP model and the PC&CG algorithm. It is worth highlighting that DIE can make an important contribution to the economic benefits of NHEMP, yet its significance will gradually decrease when the main bottleneck transits to other system restrictions.

As energy systems transform to rely on renewable energy and electrification, they encounter stronger year-to-year variability in energy supply and demand. However, most infrastructure planning is based on a single weather year, resulting in a lack of robustness. In this paper, we optimize energy infrastructure for a European energy system designed for net-zero CO_2 emissions in 62 different weather years. Subsequently, we fix the capacity layouts and simulate their operation in every weather year, to evaluate resource adequacy and CO_2 emissions abatement. We show that interannual weather variability causes variation of pm10\% in total system cost. The most expensive capacity layout obtains the lowest net CO_2 emissions but not the highest resource adequacy. Instead, capacity layouts designed with years including compound weather events result in a more robust and cost-effective design. Deploying CO_2-emitting backup generation is a cost-effective robustness measure, which only increase CO_2 emissions marginally as the average CO_2 emissions remain less than 1\% of 1990 levels. Our findings highlight how extreme weather years drive investments in robustness measures, making them compatible with all weather conditions within six decades of historical weather data.

A critical aspect of power systems research is the availability of suitable data, access to which is limited by privacy concerns and the sensitive nature of energy infrastructure. This lack of data, in turn, hinders the development of modern research avenues such as machine learning approaches or stochastic formulations. To overcome this challenge, this paper proposes a systematic, data-driven framework for reconstructing high-fidelity time series, using publicly-available grid snapshots and historical data published by transmission system operators. The proposed approach, from geo-spatial data and generation capacity reconstruction, to time series disaggregation, is applied to the French transmission grid. Thereby, synthetic but highly realistic time series data, spanning multiple years with a 5-minute granularity, is generated at the individual component level.

In coal-fired power plants, it is critical to improve the operational efficiency of boilers for sustainability. In this work, we formulate real-time boiler control as an optimization problem that looks for the best distribution of temperature in different zones and oxygen content from the flue to improve the boiler's stability and energy efficiency. We employ an efficient algorithm by integrating appropriate machine learning and optimization techniques. We obtain a large dataset collected from a real boiler for more than two months from our industry partner, and conduct extensive experiments to demonstrate the effectiveness and efficiency of the proposed algorithm.

Electrification of heavy-duty vehicles places substantial stress on distribution grids, and Charging Energy Hubs (CEHs) mitigate these impacts by integrating charging infrastructure with renewable energy sources and battery storage. Optimal sizing of CEH components is therefore a critical investment decision, yet challenging because design choices depend strongly on operational dynamics. This work presents a mixed-integer linear programming model for the optimal sizing of CEH components, using a co-design approach that jointly optimizes component sizing and operational decisions. A case study for a heavy-duty fleet demonstrates the effectiveness of the method for cost-efficient, scalable, and grid-compliant CEH planning.

Accurate forecasts for day-ahead photovoltaic (PV) power generation are crucial to support a high PV penetration rate in the local electricity grid and to assure stability in the grid. We use state-of-the-art tree-based machine learning methods to produce such forecasts and, unlike previous studies, we hereby account for (i) the effects various meteorological as well as astronomical features have on PV power production, and this (ii) at coarse as well as granular spatial locations. To this end, we use data from Belgium and forecast day-ahead PV power production at an hourly resolution. The insights from our study can assist utilities, decision-makers, and other stakeholders in optimizing grid operations, economic dispatch, and in facilitating the integration of distributed PV power into the electricity grid.

As a telecom provider, our company has a critical mission to maintain telecom services even during power outages. To accomplish the mission, it is essential to maintain the power of the telecom base stations. Here we consider a solution where electric vehicles (EVs) directly supply power to base stations by traveling to their locations. The goal is to find EV routes that minimize both the total travel distance of all EVs and the number of downed base stations. In this paper, we formulate this routing problem as a new variant of the Electric Vehicle Routing Problem (EVRP) and propose a solver that combines a rule-based vehicle selector and a reinforcement learning (RL)-based node selector. The rule of the vehicle selector ensures the exact environmental states when the selected EV starts to move. In addition, the node selection by the RL model enables fast route generation, which is critical in emergencies. We evaluate our solver on both synthetic datasets and real datasets. The results show that our solver outperforms baselines in terms of the objective value and computation time. Moreover, we analyze the generalization and scalability of our solver, demonstrating the capability toward unseen settings and large-scale problems. Check also our project page: https://ntt-dkiku.github.io/rl-evrpeps.

Solving the optimal power flow (OPF) problem in real-time electricity market improves the efficiency and reliability in the integration of low-carbon energy resources into the power grids. To address the scalability and adaptivity issues of existing end-to-end OPF learning solutions, we propose a new graph neural network (GNN) framework for predicting the electricity market prices from solving OPFs. The proposed GNN-for-OPF framework innovatively exploits the locality property of prices and introduces physics-aware regularization, while attaining reduced model complexity and fast adaptivity to varying grid topology. Numerical tests have validated the learning efficiency and adaptivity improvements of our proposed method over existing approaches.

Constrained Markov Decision Processes (CMDPs) are critical in many high-stakes applications, where decisions must optimize cumulative rewards while strictly adhering to complex nonlinear constraints. In domains such as power systems, finance, supply chains, and precision robotics, violating these constraints can result in significant financial or societal costs. Existing Reinforcement Learning (RL) methods often struggle with sample efficiency and effectiveness in finding feasible policies for highly and strictly constrained CMDPs, limiting their applicability in these environments. Stochastic dual dynamic programming is often used in practice on convex relaxations of the original problem, but they also encounter computational challenges and loss of optimality. This paper introduces a novel approach, Two-Stage Deep Decision Rules (TS-DDR), to efficiently train parametric actor policies using Lagrangian Duality. TS-DDR is a self-supervised learning algorithm that trains general decision rules (parametric policies) using stochastic gradient descent (SGD); its forward passes solve {\em deterministic} optimization problems to find feasible policies, and its backward passes leverage duality theory to train the parametric policy with closed-form gradients. TS-DDR inherits the flexibility and computational performance of deep learning methodologies to solve CMDP problems. Applied to the Long-Term Hydrothermal Dispatch (LTHD) problem using actual power system data from Bolivia, TS-DDR is shown to enhance solution quality and to reduce computation times by several orders of magnitude when compared to current state-of-the-art methods.

How well do AI systems perform in algorithm engineering for hard optimization problems in domains such as package-delivery routing, crew scheduling, factory production planning, and power-grid balancing? We introduce ALE-Bench, a new benchmark for evaluating AI systems on score-based algorithmic programming contests. Drawing on real tasks from the AtCoder Heuristic Contests, ALE-Bench presents optimization problems that are computationally hard and admit no known exact solution. Unlike short-duration, pass/fail coding benchmarks, ALE-Bench encourages iterative solution refinement over long time horizons. Our software framework supports interactive agent architectures that leverage test-run feedback and visualizations. Our evaluation of frontier LLMs revealed that while they demonstrate high performance on specific problems, a notable gap remains compared to humans in terms of consistency across problems and long-horizon problem-solving capabilities. This highlights the need for this benchmark to foster future AI advancements.

Multiobjective optimization plays an increasingly important role in modern applications, where several criteria are often of equal importance. The task in multiobjective optimization and multiobjective optimal control is therefore to compute the set of optimal compromises (the Pareto set) between the conflicting objectives. The advances in algorithms and the increasing interest in Pareto-optimal solutions have led to a wide range of new applications related to optimal and feedback control - potentially with non-smoothness both on the level of the objectives or in the system dynamics. This results in new challenges such as dealing with expensive models (e.g., governed by partial differential equations (PDEs)) and developing dedicated algorithms handling the non-smoothness. Since in contrast to single-objective optimization, the Pareto set generally consists of an infinite number of solutions, the computational effort can quickly become challenging, which is particularly problematic when the objectives are costly to evaluate or when a solution has to be presented very quickly. This article gives an overview of recent developments in the field of multiobjective optimization of non-smooth PDE-constrained problems. In particular we report on the advances achieved within Project 2 "Multiobjective Optimization of Non-Smooth PDE-Constrained Problems - Switches, State Constraints and Model Order Reduction" of the DFG Priority Programm 1962 "Non-smooth and Complementarity-based Distributed Parameter Systems: Simulation and Hierarchical Optimization".

Accurate forecasting of electrical demand is essential for maintaining a stable and reliable power grid, optimizing the allocation of energy resources, and promoting efficient energy consumption practices. This study investigates the effectiveness of five hyperparameter optimization (HPO) algorithms -- Random Search, Covariance Matrix Adaptation Evolution Strategy (CMA--ES), Bayesian Optimization, Partial Swarm Optimization (PSO), and Nevergrad Optimizer (NGOpt) across univariate and multivariate Short-Term Load Forecasting (STLF) tasks. Using the Panama Electricity dataset (n=48,049), we evaluate HPO algorithms' performances on a surrogate forecasting algorithm, XGBoost, in terms of accuracy (i.e., MAPE, R^2) and runtime. Performance plots visualize these metrics across varying sample sizes from 1,000 to 20,000, and Kruskal--Wallis tests assess the statistical significance of the performance differences. Results reveal significant runtime advantages for HPO algorithms over Random Search. In univariate models, Bayesian optimization exhibited the lowest accuracy among the tested methods. This study provides valuable insights for optimizing XGBoost in the STLF context and identifies areas for future research.

The widespread adoption of electric vehicles (EVs) has increased the importance of demand response in smart grids. This paper proposes a two-layer demand response optimization framework for EV users and aggregators, leveraging large language models (LLMs) to balance electricity supply and demand and optimize energy utilization during EV charging. The upper-layer model, focusing on the aggregator, aims to maximize profits by adjusting retail electricity prices. The lower-layer model targets EV users, using LLMs to simulate charging demands under varying electricity prices and optimize both costs and user comfort. The study employs a multi-threaded LLM decision generator to dynamically analyze user behavior, charging preferences, and psychological factors. The framework utilizes the PSO method to optimize electricity prices, ensuring user needs are met while increasing aggregator profits. Simulation results show that the proposed model improves EV charging efficiency, alleviates peak power loads, and stabilizes smart grid operations.

Reinforcement learning (RL) is a powerful framework for optimizing decision-making in complex systems under uncertainty, an essential challenge in real-world settings, particularly in the context of the energy transition. A representative example is remote microgrids that supply power to communities disconnected from the main grid. Enabling the energy transition in such systems requires coordinated control of renewable sources like wind turbines, alongside fuel generators and batteries, to meet demand while minimizing fuel consumption and battery degradation under exogenous and intermittent load and wind conditions. These systems must often conform to extensive regulations and complex operational constraints. To ensure that RL agents respect these constraints, it is crucial to provide interpretable guarantees. In this paper, we introduce Shielded Controller Units (SCUs), a systematic and interpretable approach that leverages prior knowledge of system dynamics to ensure constraint satisfaction. Our shield synthesis methodology, designed for real-world deployment, decomposes the environment into a hierarchical structure where each SCU explicitly manages a subset of constraints. We demonstrate the effectiveness of SCUs on a remote microgrid optimization task with strict operational requirements. The RL agent, equipped with SCUs, achieves a 24% reduction in fuel consumption without increasing battery degradation, outperforming other baselines while satisfying all constraints. We hope SCUs contribute to the safe application of RL to the many decision-making challenges linked to the energy transition.

The precise knowledge regarding the state of the power grid is important in order to ensure optimal and reliable grid operation. Specifically, knowing the state of the distribution grid becomes increasingly important as more renewable energy sources are connected directly into the distribution network, increasing the fluctuations of the injected power. In this paper, we consider the case when the distribution grid becomes partially observable, and the state estimation problem is under-determined. We present a new methodology that leverages a deep neural network (DNN) to estimate the grid state. The standard DNN training method is modified to explicitly incorporate the physical information of the grid topology and line/shunt admittance. We show that our method leads to a superior accuracy of the estimation when compared to the case when no physical information is provided. Finally, we compare the performance of our method to the standard state estimation approach, which is based on the weighted least squares with pseudo-measurements, and show that our method performs significantly better with respect to the estimation accuracy.

The highly anticipated 'Battle of the Water Networks' is back with a new challenge for the water community. This competition will be hosted at the 4th International Joint Conference on Water Distribution Systems Analysis and Computing and Control in the Water Industry (WDSA/CCWI 2026), taking place in Paphos, Cyprus, from May 18-21, 2026. This competition embodies the core mission of Water-Futures and the theme for WDSA/CCWI 2026: "Designing the next generation of urban water (and wastewater) systems." The objective is to design and operate a water distribution system over a long-term horizon under deep uncertainty, with interventions applied in stages. For the first time, this challenge features a staged-design approach, unobservable and unknown uncertainties, and incorporates elements of policymaking and artificial intelligence. The solutions will be assessed using a transparent and inspectable open-source evaluation framework.

Combined electric power system and High-Altitude Electromagnetic Pulse (HEMP) models are being developed to determine the effect of a HEMP on the US power grid. The work relies primarily on deterministic methods; however, it is computationally untenable to evaluate the E1 HEMP response of large numbers of grid components distributed across a large interconnection. Further, the deterministic assessment of these components' failures are largely unachievable. E1 HEMP laboratory testing of the components is accomplished, but is expensive, leaving few data points to construct failure models of grid components exposed to E1 HEMP. The use of Bayesian priors, developed using the subject matter expertise, combined with the minimal test data in a Bayesian inference process, provides the basis for the development of more robust and cost-effective statistical component failure models. These can be used with minimal computational burden in a simulation environment such as sampling of Cumulative Distribution Functions (CDFs).

Heat pumps are essential for decarbonizing residential heating but consume substantial electrical energy, impacting operational costs and grid demand. Many systems run inefficiently due to planning flaws, operational faults, or misconfigurations. While optimizing performance requires skilled professionals, labor shortages hinder large-scale interventions. However, digital tools and improved data availability create new service opportunities for energy efficiency, predictive maintenance, and demand-side management. To support research and practical solutions, we present an open-source dataset of electricity consumption from 1,408 households with heat pumps and smart electricity meters in the canton of Zurich, Switzerland, recorded at 15-minute and daily resolutions between 2018-11-03 and 2024-03-21. The dataset includes household metadata, weather data from 8 stations, and ground truth data from 410 field visit protocols collected by energy consultants during system optimizations. Additionally, the dataset includes a Python-based data loader to facilitate seamless data processing and exploration.

We investigate safe multi-agent reinforcement learning, where agents seek to collectively maximize an aggregate sum of local objectives while satisfying their own safety constraints. The objective and constraints are described by {\it general utilities}, i.e., nonlinear functions of the long-term state-action occupancy measure, which encompass broader decision-making goals such as risk, exploration, or imitations. The exponential growth of the state-action space size with the number of agents presents challenges for global observability, further exacerbated by the global coupling arising from agents' safety constraints. To tackle this issue, we propose a primal-dual method utilizing shadow reward and κ-hop neighbor truncation under a form of correlation decay property, where κ is the communication radius. In the exact setting, our algorithm converges to a first-order stationary point (FOSP) at the rate of Oleft(T^{-2/3}right). In the sample-based setting, we demonstrate that, with high probability, our algorithm requires mathcal{O}left(ε^{-3.5}right) samples to achieve an ε-FOSP with an approximation error of O(φ_0^{2κ}), where φ_0in (0,1). Finally, we demonstrate the effectiveness of our model through extensive numerical experiments.

Renewable energy forecasting is attaining greater importance due to its constant increase in contribution to the electrical power grids. Solar energy is one of the most significant contributors to renewable energy and is dependent on solar irradiation. For the effective management of electrical power grids, forecasting models that predict solar irradiation, with high accuracy, are needed. In the current study, Machine Learning techniques such as Linear Regression, Extreme Gradient Boosting and Genetic Algorithm Optimization are used to forecast solar irradiation. The data used for training and validation is recorded from across three different geographical stations in the United States that are part of the SURFRAD network. A Global Horizontal Index (GHI) is predicted for the models built and compared. Genetic Algorithm Optimization is applied to XGB to further improve the accuracy of solar irradiation prediction.

Electric motors are used in many applications and their efficiency is strongly dependent on their control. Among others, PI approaches or model predictive control methods are well-known in the scientific literature and industrial practice. A novel approach is to use reinforcement learning (RL) to have an agent learn electric drive control from scratch merely by interacting with a suitable control environment. RL achieved remarkable results with super-human performance in many games (e.g. Atari classics or Go) and also becomes more popular in control tasks like cartpole or swinging pendulum benchmarks. In this work, the open-source Python package gym-electric-motor (GEM) is developed for ease of training of RL-agents for electric motor control. Furthermore, this package can be used to compare the trained agents with other state-of-the-art control approaches. It is based on the OpenAI Gym framework that provides a widely used interface for the evaluation of RL-agents. The initial package version covers different DC motor variants and the prevalent permanent magnet synchronous motor as well as different power electronic converters and a mechanical load model. Due to the modular setup of the proposed toolbox, additional motor, load, and power electronic devices can be easily extended in the future. Furthermore, different secondary effects like controller interlocking time or noise are considered. An intelligent controller example based on the deep deterministic policy gradient algorithm which controls a series DC motor is presented and compared to a cascaded PI-controller as a baseline for future research. Fellow researchers are encouraged to use the framework in their RL investigations or to contribute to the functional scope (e.g. further motor types) of the package.

This paper presents the Adaptive Personalized Control System (APECS) architecture, a novel framework for human-in-the-loop control. An architecture is developed which defines appropriate constraints for the system objectives. A method for enacting Lipschitz and sector bounds on the resulting controller is derived to ensure desirable control properties. An analysis of worst-case loss functions and the optimal loss function weighting is made to implement an effective training scheme. Finally, simulations are carried out to demonstrate the effectiveness of the proposed architecture. This architecture resulted in a 4.5% performance increase compared to the human operator and 9% to an unconstrained feedforward neural network trained in the same way.

It is foreseeable that the number of spacecraft will increase exponentially, ushering in an era dominated by satellite mega-constellations (SMC). This necessitates a focus on energy in space: spacecraft power systems (SPS), especially their health management (HM), given their role in power supply and high failure rates. Providing health management for dozens of SPS and for thousands of SPS represents two fundamentally different paradigms. Therefore, to adapt the health management in the SMC era, this work proposes a principle of aligning underlying capabilities (AUC principle) and develops SpaceHMchat, an open-source Human-AI collaboration (HAIC) framework for all-in-loop health management (AIL HM). SpaceHMchat serves across the entire loop of work condition recognition, anomaly detection, fault localization, and maintenance decision making, achieving goals such as conversational task completion, adaptive human-in-the-loop learning, personnel structure optimization, knowledge sharing, efficiency enhancement, as well as transparent reasoning and improved interpretability. Meanwhile, to validate this exploration, a hardware-realistic fault injection experimental platform is established, and its simulation model is built and open-sourced, both fully replicating the real SPS. The corresponding experimental results demonstrate that SpaceHMchat achieves excellent performance across 23 quantitative metrics, such as 100% conclusion accuracy in logical reasoning of work condition recognition, over 99% success rate in anomaly detection tool invocation, over 90% precision in fault localization, and knowledge base search time under 3 minutes in maintenance decision-making. Another contribution of this work is the release of the first-ever AIL HM dataset of SPS. This dataset contains four sub-datasets, involving 4 types of AIL HM sub-tasks, 17 types of faults, and over 700,000 timestamps.

As smart grids (SG) increasingly rely on advanced technologies like sensors and communication systems for efficient energy generation, distribution, and consumption, they become enticing targets for sophisticated cyberattacks. These evolving threats demand robust security measures to maintain the stability and resilience of modern energy systems. While extensive research has been conducted, a comprehensive exploration of proactive cyber defense strategies utilizing Deep Learning (DL) in {SG} remains scarce in the literature. This survey bridges this gap, studying the latest DL techniques for proactive cyber defense. The survey begins with an overview of related works and our distinct contributions, followed by an examination of SG infrastructure. Next, we classify various cyber defense techniques into reactive and proactive categories. A significant focus is placed on DL-enabled proactive defenses, where we provide a comprehensive taxonomy of DL approaches, highlighting their roles and relevance in the proactive security of SG. Subsequently, we analyze the most significant DL-based methods currently in use. Further, we explore Moving Target Defense, a proactive defense strategy, and its interactions with DL methodologies. We then provide an overview of benchmark datasets used in this domain to substantiate the discourse.{ This is followed by a critical discussion on their practical implications and broader impact on cybersecurity in Smart Grids.} The survey finally lists the challenges associated with deploying DL-based security systems within SG, followed by an outlook on future developments in this key field.

With the rapid development of global industrial production, the demand for reliability in power equipment has been continuously increasing. Ensuring the stability of power system operations requires accurate methods to detect potential faults in power equipment, thereby guaranteeing the normal supply of electrical energy. In this article, the performance of YOLOv5, YOLOv8, YOLOv9, YOLOv10, and the state-of-the-art YOLOv11 methods was comprehensively evaluated for power equipment object detection. Experimental results demonstrate that the mean average precision (mAP) on a public dataset for power equipment was 54.4%, 55.5%, 43.8%, 48.0%, and 57.2%, respectively, with the YOLOv11 achieving the highest detection performance. Moreover, the YOLOv11 outperformed other methods in terms of recall rate and exhibited superior performance in reducing false detections. In conclusion, the findings indicate that the YOLOv11 model provides a reliable and effective solution for power equipment object detection, representing a promising approach to enhancing the operational reliability of power systems.

Driven by advancements in sensing and computing, deep reinforcement learning (DRL)-based methods have demonstrated significant potential in effectively tackling distribution system restoration (DSR) challenges under uncertain operational scenarios. However, the data-intensive nature of DRL poses obstacles in achieving satisfactory DSR solutions for large-scale, complex distribution systems. Inspired by the transformative impact of emerging foundation models, including large language models (LLMs), across various domains, this paper explores an innovative approach harnessing LLMs' powerful computing capabilities to address scalability challenges inherent in conventional DRL methods for solving DSR. To our knowledge, this study represents the first exploration of foundation models, including LLMs, in revolutionizing conventional DRL applications in power system operations. Our contributions are twofold: 1) introducing a novel LLM-powered Physics-Informed Decision Transformer (PIDT) framework that leverages LLMs to transform conventional DRL methods for DSR operations, and 2) conducting comparative studies to assess the performance of the proposed LLM-powered PIDT framework at its initial development stage for solving DSR problems. While our primary focus in this paper is on DSR operations, the proposed PIDT framework can be generalized to optimize sequential decision-making across various power system operations.

Power distribution networks are evolving due to the integration of DERs and increased customer participation. To maintain optimal operation, minimize losses, and meet varying load demands, frequent network reconfiguration is necessary. Traditionally, the reconfiguration task relies on optimization software and expert operators, but as systems grow more complex, faster and more adaptive solutions are required without expert intervention. Data-driven reconfiguration is gaining traction for its accuracy, speed, and robustness against incomplete network data. LLMs, with their ability to capture complex patterns, offer a promising approach for efficient and responsive network reconfiguration in evolving complex power networks. In this work, we introduce LLM4DistReconfig, a deep learning-based approach utilizing a fine-tuned LLM to solve the distribution network reconfiguration problem. By carefully crafting prompts and designing a custom loss function, we train the LLM with inputs representing network parameters such as buses, available lines, open lines, node voltages, and system loss. The model then predicts optimal reconfigurations by outputting updated network configurations that minimize system loss while meeting operational constraints. Our approach significantly reduces inference time compared to classical algorithms, allowing for near real-time optimal reconfiguration after training. Experimental results show that our method generates optimal configurations minimizing system loss for five individual and a combined test dataset. It also produces minimal invalid edges, no cycles, or subgraphs across all datasets, fulfilling domain-specific needs. Additionally, the generated responses contain less than 5% improper outputs on seen networks and satisfactory results on unseen networks, demonstrating its effectiveness and reliability for the reconfiguration task.

State estimation is highly critical for accurately observing the dynamic behavior of the power grids and minimizing risks from cyber threats. However, existing state estimation methods encounter challenges in accurately capturing power system dynamics, primarily because of limitations in encoding the grid topology and sparse measurements. This paper proposes a physics-informed graphical learning state estimation method to address these limitations by leveraging both domain physical knowledge and a graph neural network (GNN). We employ a GNN architecture that can handle the graph-structured data of power systems more effectively than traditional data-driven methods. The physics-based knowledge is constructed from the branch current formulation, making the approach adaptable to both transmission and distribution systems. The validation results of three IEEE test systems show that the proposed method can achieve lower mean square error more than 20% than the conventional methods.

Much has been said about observability in system theory and control; however, it has been recently that observability in complex networks has seriously attracted the attention of researchers. This paper examines the state-of-the-art and discusses some issues raised due to "complexity" and "stochasticity". These unresolved issues call for a new practical methodology. For stochastic systems, a degree of observability may be defined and the observability problem is not a binary (i.e., yes-no) question anymore. Here, we propose to employ a goal-seeking system to play a supervisory role in the network. Hence, improving the degree of observability would be a valid objective for the supervisory system. Towards this goal, the supervisor dynamically optimizes the observation process by reconfiguring the sensory parts in the network. A cognitive dynamic system is suggested as a proper choice for the supervisory system. In this framework, the network itself is viewed as the environment with which the cognitive dynamic system interacts. Computer experiments confirm the potential of the proposed approach for addressing some of the issues raised in networks due to complexity and stochasticity.

The transition to hydrogen powered transportation requires regionally tailored yet scalable infrastructure planning. This study presents the first Texas specific, multi-period mixed integer optimization model for hydrogen transportation from 2025 to 2050, addressing challenges in infrastructure phasing, asset coordination, and multimodal logistics. The framework introduces three innovations: (1) phased deployment with delayed investment constraints, (2) dynamic modeling of fleet aging and replacement, and (3) a clustering-based hub structure enabling adaptive two-stage hydrogen delivery. Simulations show pipeline deployment supports up to 94.8% of hydrogen flow by 2050 under high demand, reducing transport costs by 23% compared to vehicle-based systems. However, one-year construction delays reduce pipeline coverage by over 60%, shifting reliance to costlier road transport. While the study focuses on Texas, its modular design and adaptable inputs apply to other regions. It provides a tool for policy makers and stakeholders to manage hydrogen transitions under logistical and economic constraints.

Synchrophasor technology is an emerging and developing technology for monitoring and control of wide area measurement systems (WAMS). In an elementary WAMS, two identical phasors measured at two different locations have difference in the phase angles measured since their reference waveforms are not synchronized with each other. Phasor measurement units (PMUs) measure input phasors with respect to a common reference wave based on the atomic clock pulses received from global positioning system (GPS) satellites, eliminating variation in the measured phase angles due to distant locations of the measurement nodes. This has found tremendous applications in quick fault detection, fault location analysis, accurate current, voltage, frequency and phase angle measurements in WAMS. Commercially available PMU models are often proven to be expensive for research and development as well as for grid integration projects. This research article proposes an economic PMU model optimized for accurate steadystate performance based on recursive discrete Fourier transform (DFT) and provides results and detailed analysis of the proposed PMU model as per the steady state compliance specifications of IEEE standard C37.118.1. Results accurate up to 13 digits after decimal point are obtained through the developed PMU model for both nominal and off-nominal frequency inputs in steady state.