Daily Papers

Accurate precipitation estimation is critical for hydrological applications, especially in the Global South where ground-based observation networks are sparse and forecasting skill is limited. Existing satellite-based precipitation products often rely on the longwave infrared channel alone or are calibrated with data that can introduce significant errors, particularly at sub-daily timescales. This study introduces Oya, a novel real-time precipitation retrieval algorithm utilizing the full spectrum of visible and infrared (VIS-IR) observations from geostationary (GEO) satellites. Oya employs a two-stage deep learning approach, combining two U-Net models: one for precipitation detection and another for quantitative precipitation estimation (QPE), to address the inherent data imbalance between rain and no-rain events. The models are trained using high-resolution GPM Combined Radar-Radiometer Algorithm (CORRA) v07 data as ground truth and pre-trained on IMERG-Final retrievals to enhance robustness and mitigate overfitting due to the limited temporal sampling of CORRA. By leveraging multiple GEO satellites, Oya achieves quasi-global coverage and demonstrates superior performance compared to existing competitive regional and global precipitation baselines, offering a promising pathway to improved precipitation monitoring and forecasting.

Deep learning has significantly improved the accuracy of precipitation nowcasting. However, most existing multimodal models typically use simple channel concatenation or interpolation methods for data fusion, which often overlook the feature differences between different modalities. This paper therefore proposes a novel precipitation nowcasting optimisation framework called FusionCast. This framework incorporates three types of data: historical precipitable water vapour (PWV) data derived from global navigation satellite system (GNSS) inversions, historical radar based quantitative precipitation estimation (QPE), and forecasted radar QPE serving as a future prior. The FusionCast model comprises two core modules: the future prior radar QPE processing Module, which forecasts future radar data; and the Radar PWV Fusion (RPF) module, which uses a gate mechanism to efficiently combine features from various sources. Experimental results show that FusionCast significantly improves nowcasting performance.

In this study, we propose a volume-to-point framework for quantitative precipitation estimation (QPE) based on the Quantitative Precipitation Estimation and Segregation Using Multiple Sensor (QPESUMS) Mosaic Radar data set. With a data volume consisting of the time series of gridded radar reflectivities over the Taiwan area, we used machine learning algorithms to establish a statistical model for QPE in weather stations. The model extracts spatial and temporal features from the input data volume and then associates these features with the location-specific precipitations. In contrast to QPE methods based on the Z-R relation, we leverage the machine learning algorithms to automatically detect the evolution and movement of weather systems and associate these patterns to a location with specific topographic attributes. Specifically, we evaluated this framework with the hourly precipitation data of 45 weather stations in Taipei during 2013-2016. In comparison to the operational QPE scheme used by the Central Weather Bureau, the volume-to-point framework performed comparably well in general cases and excelled in detecting heavy-rainfall events. By using the current results as the reference benchmark, the proposed method can integrate the heterogeneous data sources and potentially improve the forecast in extreme precipitation scenarios.

Precipitation nowcasting, the high-resolution forecasting of precipitation up to two hours ahead, supports the real-world socio-economic needs of many sectors reliant on weather-dependent decision-making. State-of-the-art operational nowcasting methods typically advect precipitation fields with radar-based wind estimates, and struggle to capture important non-linear events such as convective initiations. Recently introduced deep learning methods use radar to directly predict future rain rates, free of physical constraints. While they accurately predict low-intensity rainfall, their operational utility is limited because their lack of constraints produces blurry nowcasts at longer lead times, yielding poor performance on more rare medium-to-heavy rain events. To address these challenges, we present a Deep Generative Model for the probabilistic nowcasting of precipitation from radar. Our model produces realistic and spatio-temporally consistent predictions over regions up to 1536 km x 1280 km and with lead times from 5-90 min ahead. In a systematic evaluation by more than fifty expert forecasters from the Met Office, our generative model ranked first for its accuracy and usefulness in 88% of cases against two competitive methods, demonstrating its decision-making value and ability to provide physical insight to real-world experts. When verified quantitatively, these nowcasts are skillful without resorting to blurring. We show that generative nowcasting can provide probabilistic predictions that improve forecast value and support operational utility, and at resolutions and lead times where alternative methods struggle.

Accurate forecasting of extreme weather events such as heavy rainfall or storms is critical for risk management and disaster mitigation. Although high-resolution radar observations have spurred extensive research on nowcasting models, precipitation nowcasting remains particularly challenging due to pronounced spatial locality, intricate fine-scale rainfall structures, and variability in forecasting horizons. While recent diffusion-based generative ensembles show promising results, they are computationally expensive and unsuitable for real-time applications. In contrast, deterministic models are computationally efficient but remain biased toward normal rainfall. Furthermore, the benchmark datasets commonly used in prior studies are themselves skewed--either dominated by ordinary rainfall events or restricted to extreme rainfall episodes--thereby hindering general applicability in real-world settings. In this paper, we propose exPreCast, an efficient deterministic framework for generating finely detailed radar forecasts, and introduce a newly constructed balanced radar dataset from the Korea Meteorological Administration (KMA), which encompasses both ordinary precipitation and extreme events. Our model integrates local spatiotemporal attention, a texture-preserving cubic dual upsampling decoder, and a temporal extractor to flexibly adjust forecasting horizons. Experiments on established benchmarks (SEVIR and MeteoNet) as well as on the balanced KMA dataset demonstrate that our approach achieves state-of-the-art performance, delivering accurate and reliable nowcasts across both normal and extreme rainfall regimes.

Accurate short-term warnings for extreme precipitation are critical for global disaster mitigation but are hindered by a persistent predictability barrier at the 2-6 hour horizon -- the "nowcasting gray zone." In this window, traditional observation-based extrapolation fails due to error accumulation, while numerical weather prediction is computationally too slow to resolve storm-scale dynamics. Recent generative AI approaches attempt to bridge this gap by decomposing precipitation into separate deterministic advection and stochastic diffusion components. However, this decomposition can sever fundamental causal links between entangled atmospheric processes, such as the dynamic initiation of convection triggered by boundary advection. Here we present StormDiT, a unified generative model that treats weather evolution as a holistic spatiotemporal problem, learning the coupled physics of the gray zone without human-imposed structural priors. Trained on a massive dataset of 7,720 precipitation events from China, our model achieves a breakthrough in long-horizon stability. On a heavy-rainfall test set, it maintains skillful prediction for strong convection (ge 35 dBZ) with a Critical Success Index (CSI) near 0.2 across the full 6-hour forecast at 6-minute resolution. Crucially, the model exhibits superior probabilistic calibration, accurately quantifying operational risks. On the public SEVIR benchmark, our unified paradigm more than doubles the state-of-the-art 1-hour performance for heavy rain and establishes the first robust baseline for 3-hour forecasting. Furthermore, interpretability analysis reveals that the model attends to non-local physical precursors, such as outflow boundaries, explicitly validating its emergent understanding of convective organization.

The quantitative prediction of the intensity of rainfall events (light or heavy) has remained a challenge in Numerical Weather Prediction (NWP) models. For the first time the mean coefficient of diffusional growth rates are calculated using an Eulerian-Lagrangian particle-based small-scale model on in situ airborne measurement data of Cloud Aerosol Interaction and Precipitation Enhancement Experiment (CAIPEEX) during monsoon over Indian sub-continent. The results show that diffusional growth rates varies in the range of 0.00025 - 0.0015(cm/s). The generic problem of the overestimation of light rain in NWP models might be related with the choice of cm in the model. It is also shown from DNS experiment using Eulerian-Lagrangian particle-based small-scale model that the relative dispersion is constrained with average values in the range of ~ 0.2 - 0.37 (~ 0.1- 0.26) in less humid (more humid) conditions. This is in agreement with in situ airborne observation (dispersion ~ 0.36) and previous study over Indian sub-continent. The linear relationship between relative dispersion and cloud droplet number concentration (NC) is obtained from this study using CAIPEEX observation over Indian subcontinent. The dispersion based autoconversion-scheme for Indian region must be useful for the Indian summer monsoon precipitation calculation in the general circulation model. The present study also provide valuable guidance for the parameterization of effective radius, important for radiation scheme.

The Integrated Multi-Satellite Retrievals for the Global Precipitation Measurement (IMERG) product combines precipitation estimates from passive microwave (PMW) and infrared (IR) sensors to provide quasi-global precipitation estimates at half-hourly resolution. Because IR observations are primarily sensitive to cloud-top properties, however, IR-based precipitation estimates are generally less accurate than PMW estimates and can introduce artifacts into the merged precipitation fields. We introduce GPROF-IR, a neural-network-based precipitation retrieval designed to provide precipitation estimates from single-channel geostationary IR observations for the upcoming IMERG V08. GPROF-IR uses a convolutional neural network to exploit spatiotemporal information from sequences of half-hourly IR observations. We validate GPROF-IR against independent surface-based precipitation measurements over land and ocean. GPROF-IR substantially improves upon existing single-channel IR retrievals, including the IR retrieval used in IMERG V07 and more recent neural-network-based approaches. During overpasses of flagship PMW sensors, GPROF-IR is more accurate than the corresponding IMERG PMW estimates over CONUS and Austria, but not Korea. Over CONUS, GPROF-IR outperforms the merged IMERG V07 product for hourly and daily precipitation accumulations. Against shipborne disdrometer observations, GPROF-IR is more accurate than IMERG V07 in the tropics but slightly less accurate in the extratropics. Since geostationary IR observations are continuously available across much of the globe since 1983, GPROF-IR provides a promising basis for improving merged precipitation products and developing long-term, temporally consistent precipitation records.

Accurate short-term prediction of clouds and precipitation is critical for severe weather warnings, aviation safety, and renewable energy operations. Forecasts at this timescale are provided by numerical weather models and extrapolation methods, both of which have limitations. Mesoscale numerical weather prediction models provide skillful forecasts at these scales but require significant modeling expertise and computational infrastructure, which limits their accessibility. Extrapolation-based methods are computationally lightweight but degrade rapidly beyond 1-2 hours. This presents an opportunity for data-driven forecasting directly from observations using geostationary satellites and ground-based radar, which provide high-frequency, high-resolution observations that capture mesoscale atmospheric evolution. We introduce Stormscope, a family of transformer-based generative diffusion models trained on high-resolution, multi-band geostationary satellite imagery and ground-based weather radar over the continental United States. Stormscope produces forecasts at a temporal resolution of 10 minutes and 6 kilometer spatial resolution, which are competitive with state-of-the-art mesoscale NWP models for lead times up to 6 hours. Its generative architecture enables large ensemble forecasts of explicit mesoscale dynamics for robust uncertainty quantification. Evaluated against extrapolation methods and operational mesoscale NWP models, Stormscope achieves leading performance on standard deterministic and probabilistic verification metrics across forecast horizons from 1 to 6 hours. As Stormscope relies on globally available satellite observations (and radar where available), it offers a pathway to extend skillful mesoscale forecasting to oceanic regions and countries without strong operational mesoscale modeling programs.

We introduce Version 3 (V3) of the gridded near real-time Multi-Source Weighted-Ensemble Precipitation (MSWEP) product -- the first fully global, historical machine learning powered precipitation (P) dataset, developed to meet the growing demand for timely and accurate P estimates amid escalating climate challenges. MSWEP V3 provides hourly data at 0.1^circ resolution from 1979 to the present, continuously updated with a latency of approximately two hours. Development follows a two-stage process. First, baseline P fields are generated using machine learning model stacks that integrate satellite- and (re)analysis-based P and air-temperature products, along with static variables. The models are trained using hourly and daily observations from 15,959 P gauges worldwide. Second, these baseline P fields are corrected using daily and monthly gauge observations from 57,666 and 86,000 stations globally. To assess MSWEP V3's baseline performance, we evaluated 19 (quasi-) global gridded P products -- including both uncorrected and gauge-based products -- using observations from an independent set of 15,958 gauges excluded from the first training stage. The MSWEP V3 baseline achieved a median daily Kling-Gupta Efficiency (KGE) of 0.69, outperforming all evaluated products. Other uncorrected products achieved median daily KGE values of 0.61 (ERA5), 0.46 (IMERG-L V7), 0.38 (GSMaP V8), and 0.31 (CHIRP). Using leave-one-out cross-validation, the daily gauge correction was found to improve the median daily correlation by 0.09, constrained by the already strong baseline performance. We anticipate that MSWEP V3 -- accessible at www.gloh2o.org/mswep -- will enable more reliable monitoring, forecasting, and management of water-related risks in a variable and changing climate.

Artificial Intelligence (AI) weather prediction (AIWP) models often produce "blurry" precipitation forecasts that overestimate drizzle and underestimate extremes. This study provides a novel solution to tackle this problem -- integrating terrain-following coordinates with global mass and energy conservation schemes into AIWP models. Forecast experiments are conducted to evaluate the effectiveness of this solution using FuXi, an example AIWP model, adapted to 1.0-degree grid spacing data. Verification results show large performance gains. The conservation schemes are found to reduce drizzle bias, whereas using terrain-following coordinates improves the estimation of extreme events and precipitation intensity spectra. Furthermore, a case study reveals that terrain-following coordinates capture near-surface winds better over mountains, offering AIWP models more accurate information on understanding the dynamics of precipitation processes. The proposed solution of this study can benefit a wide range of AIWP models and bring insights into how atmospheric domain knowledge can support the development of AIWP models.

A data-driven model (DDM) suitable for regional weather forecasting applications is presented. The model extends the Artificial Intelligence Forecasting System by introducing a stretched-grid architecture that dedicates higher resolution over a regional area of interest and maintains a lower resolution elsewhere on the globe. The model is based on graph neural networks, which naturally affords arbitrary multi-resolution grid configurations. The model is applied to short-range weather prediction for the Nordics, producing forecasts at 2.5 km spatial and 6 h temporal resolution. The model is pre-trained on 43 years of global ERA5 data at 31 km resolution and is further refined using 3.3 years of 2.5 km resolution operational analyses from the MetCoOp Ensemble Prediction System (MEPS). The performance of the model is evaluated using surface observations from measurement stations across Norway and is compared to short-range weather forecasts from MEPS. The DDM outperforms both the control run and the ensemble mean of MEPS for 2 m temperature. The model also produces competitive precipitation and wind speed forecasts, but is shown to underestimate extreme events.

Climate models struggle to accurately simulate precipitation, particularly extremes and the diurnal cycle. Here, we present a hybrid model that is trained directly on satellite-based precipitation observations. Our model runs at 2.8^circ resolution and is built on the differentiable NeuralGCM framework. The model demonstrates significant improvements over existing general circulation models, the ERA5 reanalysis, and a global cloud-resolving model in simulating precipitation. Our approach yields reduced biases, a more realistic precipitation distribution, improved representation of extremes, and a more accurate diurnal cycle. Furthermore, it outperforms the mid-range precipitation forecast of the ECMWF ensemble. This advance paves the way for more reliable simulations of current climate and demonstrates how training on observations can be used to directly improve GCMs.

Artificial intelligence (AI)-based data-driven weather forecasting models have experienced rapid progress over the last years. Recent studies, with models trained on reanalysis data, achieve impressive results and demonstrate substantial improvements over state-of-the-art physics-based numerical weather prediction models across a range of variables and evaluation metrics. Beyond improved predictions, the main advantages of data-driven weather models are their substantially lower computational costs and the faster generation of forecasts, once a model has been trained. However, most efforts in data-driven weather forecasting have been limited to deterministic, point-valued predictions, making it impossible to quantify forecast uncertainties, which is crucial in research and for optimal decision making in applications. Our overarching aim is to systematically study and compare uncertainty quantification methods to generate probabilistic weather forecasts from a state-of-the-art deterministic data-driven weather model, Pangu-Weather. Specifically, we compare approaches for quantifying forecast uncertainty based on generating ensemble forecasts via perturbations to the initial conditions, with the use of statistical and machine learning methods for post-hoc uncertainty quantification. In a case study on medium-range forecasts of selected weather variables over Europe, the probabilistic forecasts obtained by using the Pangu-Weather model in concert with uncertainty quantification methods show promising results and provide improvements over ensemble forecasts from the physics-based ensemble weather model of the European Centre for Medium-Range Weather Forecasts for lead times of up to 5 days.

Machine learning (ML) has emerged as a cost-effective approach to complement dynamical downscaling for producing high-resolution regional climate projections. However, the absence of standardised training and evaluation protocols, applied consistently across multiple domains, continues to hinder meaningful model intercomparison. We introduce CORDEX-ML-Bench, a benchmark aligned with CORDEX, which constitutes the first phase of a community initiative to advance data-driven downscaling toward operational readiness, and complement future dynamical downscaling efforts under CMIP7. The framework targets downscaled daily maximum temperature and precipitation to ~10 km resolution (20x increase) across three pilot regions; European Alps, New Zealand, and Southern Africa. Using a perfect-model experimental design, we evaluate 40 ML configurations developed independently, spanning traditional ML, convolutional U-Nets, vision transformers, graph neural networks, and generative models based on diffusion, flow matching, and generative adversarial networks. Models are trained under two experimental periods, an empirical-statistical downscaling pseudo-reality (historical period only) and Emulator (historical and future periods) -and are evaluated against a core set of metrics developed specifically for assessing downscaling skill. Generative models consistently outperform deterministic approaches for precipitation, better capturing fine-scale variability and extremes. For temperature, the generative advantage narrows and deterministic architectures remain competitive. Models trained solely on the historical period systematically underestimate future climate-change signals while those additionally trained on a future period perform better. These findings raise concerns about historically trained models widely used in an operational setting, underscoring the need for rigorous extrapolation testing.

Motivated by recent advances in operational weather forecasting, we study the efficacy of low-precision arithmetic for climate simulations. We develop a framework to measure rounding error in a climate model which provides a stress-test for a low-precision version of the model, and we apply our method to a variety of models including the Lorenz system; a shallow water approximation for flow over a ridge; and a coarse resolution global atmospheric model with simplified parameterisations (SPEEDY). Although double precision (52 significant bits) is standard across operational climate models, in our experiments we find that single precision (23 sbits) is more than enough and that as low as half precision (10 sbits) is often sufficient. For example, SPEEDY can be run with 12 sbits across the entire code with negligible rounding error and this can be lowered to 10 sbits if very minor errors are accepted, amounting to less than 0.1 mm/6hr for the average grid-point precipitation, for example. Our test is based on the Wasserstein metric and this provides stringent non-parametric bounds on rounding error accounting for annual means as well as extreme weather events. In addition, by testing models using both round-to-nearest (RN) and stochastic rounding (SR) we find that SR can mitigate rounding error across a range of applications. Thus our results also provide evidence that SR could be relevant to next-generation climate models. While many studies have shown that low-precision arithmetic can be suitable on short-term weather forecasting timescales, our results give the first evidence that a similar low precision level can be suitable for climate.

Soil moisture-precipitation coupling (SMPC) plays a critical role in Earth's water and energy cycles but remains difficult to quantify due to synoptic-scale variability and the complex interplay of land-atmosphere processes. Here, we apply high-dimensional model representation (HDMR) to functionally decompose the structural, correlative, and cooperative contributions of key land-atmosphere variables to precipitation. Benchmark tests confirm that HDMR overcomes limitations of commonly used correlation and regression approaches in isolating direct versus indirect effects. For example, analysis of gross primary productivity using a light-use-efficiency model shows that linear regression underestimates the temperature effect, while HDMR captures it accurately. Applying HDMR to CONUS404 reanalysis data reveals that morning soil moisture explains up to 40 percent of the variance in summertime afternoon precipitation over the Great Plains, more than double prior estimates. On days with afternoon rainfall (12-hour totals of 4.7-8.2 mm), first-order SM effects can boost precipitation by up to 8 mm under wet conditions, with an additional 3 mm from second-order interactions involving temperature and moisture. By capturing real-world co-variability and higher-order effects, HDMR provides a physically grounded, data-driven framework for diagnosing land-atmosphere coupling. These results underscore the need for more nuanced, interaction-aware data analysis methods in climate modeling and prediction.

Weather forecasting models commonly use the average forecast skill for short-range forecasts. However, it does not necessarily imply skill in the tails of the weather distribution. Evaluating tail events requires a consistently defined target with broad spatial and temporal coverage. Disaster catalogs record societal consequences, but are sparse and reporting-dependent; climatological tails describe unusual weather without necessarily implying harm. We present TailWeather, a global 0.25-degree, land-only dataset derived from ERA5, covering 1981-2022 and extending into January 2023. It labels heatwaves, cold waves, heavy precipitation, and extreme wind daily, and meteorological drought monthly. Each event has an ordinal severity tier and a numerical intensity score referenced to the local 1991-2020 climate. The scores support alternative thresholds within their stored resolution and valid domain. Comparison with documented disasters shows greater impact enrichment towards stricter tails, with differences among hazards and substantial gaps in catalog coverage. Forecast examples illustrate how low average errors can coexist with weak event detection, particularly for wind. TailWeather provides a reusable physical target for studying and evaluating extremes, while complementing the information in disaster catalogs.

Artificial Intelligence (AI) weather prediction (AIWP) models are powerful tools for medium-range forecasts but often lack physical consistency, leading to outputs that violate conservation laws. This study introduces a set of novel physics-based schemes designed to enforce the conservation of global dry air mass, moisture budget, and total atmospheric energy in AIWP models. The schemes are highly modular, allowing for seamless integration into a wide range of AI model architectures. Forecast experiments are conducted to demonstrate the benefit of conservation schemes using FuXi, an example AIWP model, modified and adapted for 1.0-degree grid spacing. Verification results show that the conservation schemes can guide the model in producing forecasts that obey conservation laws. The forecast skills of upper-air and surface variables are also improved, with longer forecast lead times receiving larger benefits. Notably, large performance gains are found in the total precipitation forecasts, owing to the reduction of drizzle bias. The proposed conservation schemes establish a foundation for implementing other physics-based schemes in the future. They also provide a new way to integrate atmospheric domain knowledge into the design and refinement of AIWP models.

Meteorological agencies around the world rely on real-time flood guidance to issue live-saving advisories and warnings. For decades traditional numerical weather prediction (NWP) models have been state-of-the-art for precipitation forecasting. However, physically-parameterized models suffer from a few core limitations: first, solving PDEs to resolve atmospheric dynamics is computationally demanding, and second, these methods degrade in performance at nowcasting timescales (i.e., 0-4 hour lead-times). Motivated by these shortcomings, recent work proposes AI-weather prediction (AI-WP) alternatives that learn to emulate analysis data with neural networks. While these data-driven approaches have enjoyed enormous success across diverse spatial and temporal resolutions, applications of video-understanding architectures for weather forecasting remain underexplored. To address these gaps, we propose SaTformer: a video transformer built on full space-time attention that skillfully forecasts extreme precipitation from satellite radiances. Along with our novel architecture, we introduce techniques to tame long-tailed precipitation datasets. Namely, we reformulate precipitation regression into a classification problem, and employ a class-weighted loss to address label imbalances. Our model scored first place on the NeurIPS Weather4Cast 2025 Cumulative Rainfall challenge. Code and model weights are available: https://github.com/leharris3/satformer

Understanding the risks posed by extreme rainfall events requires analysis of precipitation fields with high resolution (to assess localized hazards) and extensive historical coverage (to capture sufficient examples of rare occurrences). Radar and mesonet networks provide precipitation fields at 1 km resolution but with limited historical and geographical coverage, while gauge-based records and reanalysis products cover decades of time on a global scale, but only at 30-50 km resolution. To help provide high-resolution precipitation estimates over long time scales, this study presents Wasserstein Regularized Diffusion (WassDiff), a diffusion framework to downscale (super-resolve) precipitation fields from low-resolution gauge and reanalysis products. Crucially, unlike related deep generative models, WassDiff integrates a Wasserstein distribution-matching regularizer to the denoising process to reduce empirical biases at extreme intensities. Comprehensive evaluations demonstrate that WassDiff quantitatively outperforms existing state-of-the-art generative downscaling methods at recovering extreme weather phenomena such as tropical storms and cold fronts. Case studies further qualitatively demonstrate WassDiff's ability to reproduce realistic fine-scale weather structures and accurate peak intensities. By unlocking decades of high-resolution rainfall information from globally available coarse records, WassDiff offers a practical pathway toward more accurate flood-risk assessments and climate-adaptation planning.

Weather forecasting is dominated by numerical weather prediction that tries to model accurately the physical properties of the atmosphere. A downside of numerical weather prediction is that it is lacking the ability for short-term forecasts using the latest available information. By using a data-driven neural network approach we show that it is possible to produce an accurate precipitation nowcast. To this end, we propose SmaAt-UNet, an efficient convolutional neural networks-based on the well known UNet architecture equipped with attention modules and depthwise-separable convolutions. We evaluate our approaches on a real-life datasets using precipitation maps from the region of the Netherlands and binary images of cloud coverage of France. The experimental results show that in terms of prediction performance, the proposed model is comparable to other examined models while only using a quarter of the trainable parameters.

Effective hydrological modeling and extreme weather analysis demand precipitation data at a kilometer-scale resolution, which is significantly finer than the 10 km scale offered by standard global products like IMERG. To address this, we propose the Wavelet Diffusion Model (WDM), a generative framework that achieves 10x spatial super-resolution (downscaling to 1 km) and delivers a 9x inference speedup over pixel-based diffusion models. WDM is a conditional diffusion model that learns the learns the complex structure of precipitation from MRMS radar data directly in the wavelet domain. By focusing on high-frequency wavelet coefficients, it generates exceptionally realistic and detailed 1-km precipitation fields. This wavelet-based approach produces visually superior results with fewer artifacts than pixel-space models, and delivers a significant gains in sampling efficiency. Our results demonstrate that WDM provides a robust solution to the dual challenges of accuracy and speed in geoscience super-resolution, paving the way for more reliable hydrological forecasts.

Precipitation nowcasting is critical for disaster mitigation and aviation safety. However, radar-only models frequently suffer from a lack of large-scale atmospheric context, leading to performance degradation at longer lead times. While integrating meteorological variables predicted by weather foundation models offers a potential remedy, existing architectures fail to reconcile the profound representational heterogeneities between radar imagery and meteorological data. To bridge this gap, we propose PW-FouCast, a novel frequency-domain fusion framework that leverages Pangu-Weather forecasts as spectral priors within a Fourier-based backbone. Our architecture introduces three key innovations: (i) Pangu-Weather-guided Frequency Modulation to align spectral magnitudes and phases with meteorological priors; (ii) Frequency Memory to correct phase discrepancies and preserve temporal evolution; and (iii) Inverted Frequency Attention to reconstruct high-frequency details typically lost in spectral filtering. Extensive experiments on the SEVIR and MeteoNet benchmarks demonstrate that PW-FouCast achieves state-of-the-art performance, effectively extending the reliable forecast horizon while maintaining structural fidelity. Our code is available at https://github.com/Onemissed/PW-FouCast.

Localized extreme precipitation is a major trigger of urban flash floods and landslides, yet producing nowcasts that combine fine spatial detail with probabilistic uncertainty remains challenging. Here we introduce exPreCast-ENS, a conditional residual diffusion framework that transforms the deterministic 4 km radar nowcaster exPreCast into a 1 km probabilistic ensemble while correcting systematic forecast errors. Conditioning on both the forecast and preceding radar observations lets the ensemble-mean correct the baseline rather than perturb it, while members represent unresolved fine-scale variability. Over the Korean Peninsula, skill improves with ensemble size. In two high-impact events in 2023, a 30-member ensemble recovers 38-47% of heavy-rain pixels missed by exPreCast while retaining approximately 95% of its correct detections and alarming on under 1% of the pixels it correctly left clear. The method generates a 1-h forecast in 3.4 s on a single GPU and yields consistent improvements on the French regional MeteoNet radar dataset.

The heavy-tailed nature of precipitation intensity impedes precise precipitation nowcasting. Standard models that optimize pixel-wise losses are prone to regression-to-the-mean bias, which blurs extreme values. Existing Fourier-based methods also lack the spatial localization needed to resolve transient convective cells. To overcome these intrinsic limitations, we propose WADEPre, a wavelet-based decomposition model for extreme precipitation that transitions the modeling into the wavelet domain. By leveraging the Discrete Wavelet Transform for explicit decomposition, WADEPre employs a dual-branch architecture: an Approximation Network to model stable, low-frequency advection, isolating deterministic trends from statistical bias, and a spatially localized Detail Network to capture high-frequency stochastic convection, resolving transient singularities and preserving sharp boundaries. A subsequent Refiner module then dynamically reconstructs these decoupled multi-scale components into the final high-fidelity forecast. To address optimization instability, we introduce a multi-scale curriculum learning strategy that progressively shifts supervision from coarse scales to fine-grained details. Extensive experiments on the SEVIR and Shanghai Radar datasets demonstrate that WADEPre achieves state-of-the-art performance, yielding significant improvements in capturing extreme thresholds and maintaining structural fidelity. Our code is available at https://github.com/sonderlau/WADEPre.

Accurate precipitation forecasting is essential for hydrometeorological risk management, especially for anticipating extreme rainfall that can lead to flash flooding and infrastructure damage. This study introduces a diffusion-based deep learning (DL) framework that systematically compares three residual prediction strategies differing only in their input sources: (1) a fully data-driven model using only past observations from the Multi-Radar Multi-Sensor (MRMS) system, (2) a corrective model using only forecasts from the High-Resolution Rapid Refresh (HRRR) numerical weather prediction system, and (3) a hybrid model integrating both MRMS and selected HRRR forecast variables. By evaluating these approaches under a unified setup, we provide a clearer understanding of how each data source contributes to predictive skill over the Continental United States (CONUS). Forecasts are produced at 1-km spatial resolution, beginning with direct 1-hour predictions and extending to 12 hours using autoregressive rollouts. Performance is evaluated using both CONUS-wide and region-specific metrics that assess overall performance and skill at extreme rainfall thresholds. Across all lead times, our DL framework consistently outperforms the HRRR baseline in pixel-wise and spatiostatistical metrics. The hybrid model performs best at the shortest lead time, while the HRRR-corrective model outperforms others at longer lead times, maintaining high skill through 12 hours. To assess reliability, we incorporate calibrated uncertainty quantification tailored to the residual learning setup. These gains, particularly at longer lead times, are critical for emergency preparedness, where modest increases in forecast horizon can improve decision-making. This work advances DL-based precipitation forecasting by enhancing predictive skill, reliability, and applicability across regions.

Global reanalyses are too coarse to resolve the convective systems that produce most West African monsoon rainfall. In this work, we use U-Net based architectures to downscale daily ERA5 fields (0.25°) to IMERG V07 satellite precipitation (0.1°) over West Africa for the June to October seasons of 2000 to 2024, using geopotential, temperature, humidity and wind at three pressure levels together with elevation and land fraction. Adding ERA5 precipitation as input slightly improves performance for this particular challenging region. We find that all the deterministic networks investigated for this work are too dry and lose almost all observed variance below a few hundred kilometers, which motivated our use of a GAN-based alternative. We also investigated permutation importance for the U-Net that ranks 500 hPa specific humidity first, consistent with the sensitivity of deep convection to mid-tropospheric moisture.

Accurate monsoon rainfall prediction is vital for India's agriculture, water management, and climate risk planning, yet remains challenging due to sparse ground observations and complex regional variability. We present a multimodal deep learning framework for high-resolution precipitation classification that leverages satellite and Earth observation data. Unlike previous rainfall prediction models based on coarse 5-50 km grids, we curate a new 1 km resolution dataset for five Indian states, integrating seven key geospatial modalities: land surface temperature, vegetation (NDVI), soil moisture, relative humidity, wind speed, elevation, and land use, covering the June-September 2024 monsoon season. Our approach uses an attention-guided U-Net architecture to capture spatial patterns and temporal dependencies across modalities, combined with focal and dice loss functions to handle rainfall class imbalance defined by the India Meteorological Department (IMD). Experiments demonstrate that our multimodal framework consistently outperforms unimodal baselines and existing deep learning methods, especially in extreme rainfall categories. This work contributes a scalable framework, benchmark dataset, and state-of-the-art results for regional monsoon forecasting, climate resilience, and geospatial AI applications in India.

Weather forecasting is a long-standing computational challenge with direct societal and economic impacts. This task involves a large amount of continuous data collection and exhibits rich spatiotemporal dependencies over long periods, making it highly suitable for deep learning models. In this paper, we apply pre-training techniques to weather forecasting and propose W-MAE, a Weather model with Masked AutoEncoder pre-training for weather forecasting. W-MAE is pre-trained in a self-supervised manner to reconstruct spatial correlations within meteorological variables. On the temporal scale, we fine-tune the pre-trained W-MAE to predict the future states of meteorological variables, thereby modeling the temporal dependencies present in weather data. We conduct our experiments using the fifth-generation ECMWF Reanalysis (ERA5) data, with samples selected every six hours. Experimental results show that our W-MAE framework offers three key benefits: 1) when predicting the future state of meteorological variables, the utilization of our pre-trained W-MAE can effectively alleviate the problem of cumulative errors in prediction, maintaining stable performance in the short-to-medium term; 2) when predicting diagnostic variables (e.g., total precipitation), our model exhibits significant performance advantages over FourCastNet; 3) Our task-agnostic pre-training schema can be easily integrated with various task-specific models. When our pre-training framework is applied to FourCastNet, it yields an average 20% performance improvement in Anomaly Correlation Coefficient (ACC).

Many forecast applications require high frequency temporal resolution, yet most state-of-the-art data-driven weather forecasting systems operate at 6-hourly resolution. Although direct hourly forecasting is possible, it suffers from error accumulation and temporal inconsistency. We introduce HourGlass, a probabilistic data-driven temporal downscaling method that reconstructs the evolution between forecast states. HourGlass is trained using variants of the continuous ranked probability score (CRPS) preserving small-scale spatial variability while encouraging temporal consistency. Unlike existing deterministic temporal downscaling approaches, which tend to produce overly smooth fields, HourGlass generates realistic probabilistic forecasts. Training on forecast trajectories rather than reanalysis or analysis data also avoids the temporal inconsistencies present in datasets used by previous methods. We evaluate HourGlass in two settings: AIFS-HourGlass, applied globally to ECMWF's AIFS-Single and AIFS-ENS forecast systems, and Bris-HourGlass, applied regionally to MET Norway's high-resolution stretched-grid ensemble model, Bris. Verification against observations shows that both models retain the skill of their underlying forecasting systems while producing temporally coherent hourly forecasts with realistic small-scale variability. Case studies demonstrate physically consistent evolution during rapidly developing weather events, including extratropical cyclones and organised convection. Hourly precipitation remains challenging: HourGlass improves the spatial realism of precipitation fields but still underestimates the most intense extremes, a common limitation of data-driven weather forecasting models. These results demonstrate that HourGlass effectively bridges the gap between 6-hourly data-driven forecasts and the hourly products required for operational regional and global forecasting.

We present Varda-single-1.0, a medium-range data-driven weather prediction system built for the Alpine domain. It provides hourly deterministic regional forecasts on a mesh of 1 km resolution and global forecasts on a 31 km mesh. The system comprises two independently trained stretched-grid Graph Transformer models with encoder-processor-decoder architecture, developed in the Anemoi framework: a 6-hourly autoregressive forecaster and a temporal downscaler reconstructing hourly forecasts between the forecaster's steps. Its training curriculum includes pre-training on ERA5 reanalysis data, followed by training on a 20-year kilometre-scale regional reanalysis, and finally fine-tuning on operational kilometre-scale analyses. Verified over one year against operational analyses and surface station observations, Varda-single is competitive with or improves on MeteoSwiss' operational numerical weather prediction baselines for most headline scores and variables. It broadly matches the skill of the high-resolution 1 km ICON-CH1-EPS control at lead times up to +33 h and generally outperforms the 2 km ICON-CH2-EPS control at lead times up to +120 h. Despite competitive aggregate scores, Varda-single underestimates some local wind maxima and produces overly smooth convective precipitation fields, consistent with the smoothing associated with squared-error training. To gain insight into the model's behaviour, we investigate three case studies beyond the aggregated headline scores, and find particular weaknesses in Varda-single's representation of local winds over complex terrain. Varda-single represents an important step in the development of high-resolution ML forecasting over complex terrain, in complementing the operational regional numerical weather prediction models of MeteoSwiss with data-driven models and in providing a pretrained model for researchers and user-specific applications.

The impact of meteorological observations on weather forecasting varies with sensor type, location, time, and other environmental factors. Thus, quantitative analysis of observation impacts is crucial for effective and efficient development of weather forecasting systems. However, the existing impact analysis methods are difficult to be widely applied due to their high dependencies on specific forecasting systems. Also, they cannot provide observation impacts at multiple spatio-temporal scales, only global impacts of observation types. To address these issues, we present a novel system called ``CloudNine,'' which allows analysis of individual observations' impacts on specific predictions based on explainable graph neural networks (XGNNs). Combining an XGNN-based atmospheric state estimation model with a numerical weather prediction model, we provide a web application to search for observations in the 3D space of the Earth system and to visualize the impact of individual observations on predictions in specific spatial regions and time periods.

Probabilistic weather forecasting requires not only accurate trajectories, but calibrated distributions over plausible atmospheric futures. Recent data-driven systems have achieved remarkable deterministic skill, and diffusion-based ensemble forecasters have substantially improved sample realism and uncertainty quantification. However, their inference cost scales with forecast horizon, ensemble size, and the number of denoising steps required for each transition, making large operational ensembles expensive. To address this, we present Tyche, a one-step conditional flow model for efficient probabilistic weather forecasting. Tyche models the conditional forecast distribution with a destination-aware average-velocity flow that maps Gaussian noise directly to future weather states in a single function evaluation (1-NFE). To make this one-step transport learnable in high-dimensional geophysical fields, we derive a JVP-regularized rectification objective that enforces temporal self-consistency across source and destination flow timesteps without explicitly forming Jacobians. The transport field is parameterized by an isotropic Swin-style transformer that preserves fine-scale spatial structure while remaining scalable on global grids. To improve ensemble reliability under autoregressive forecasting, we further introduce a rollout-based finetuning stage with curriculum CRPS calibration supervision. Experiments on ERA5 at 1.5^circ and 6-hour resolution show that our Tyche, using merely a single NFE, matches or exceeds the forecast skill and calibration of state-of-the-art multi-step generative baselines and the operational ECMWF IFS ensemble.

Accurate prediction of extreme weather events remains a major challenge for artificial intelligence-based weather prediction systems. While deterministic models such as FuXi, GraphCast, and SFNO have achieved competitive forecast skill relative to numerical weather prediction, their ability to represent uncertainty and capture extremes is still limited. This study investigates how state-of-the-art deterministic artificial intelligence-based models respond to initial-condition perturbations and evaluates the resulting ensembles in forecasting extremes. Using four perturbation strategies (Gaussian, Perlin noise, Hemispheric Centered Bred Vectors, and Huge Ensembles), we generate 50 member ensembles for the August 2022 Pakistan floods and China heatwave, and complement these case studies with a global threshold-based evaluation. Ensemble skill is assessed against ERA5 and compared with IFS ENS and the AIFS ENS probabilistic model using deterministic and probabilistic metrics. Results show that simpler perturbations like Gaussian and Perlin noise produce similarly realistic ensemble spread and probabilistic skill as flow-based approaches like HCBV and HENS, narrowing but not closing the performance gap with numerical weather prediction ensembles, or native probabilistic models which retain the highest probabilistic skill across variables. Model choice is the dominant factor for ensemble performance, not perturbation method. Across variables, models capture temperature extremes more effectively than precipitation. These findings demonstrate that simple input perturbations can extend deterministic models toward probabilistic forecasting in hardware-constrained settings, supporting artificial intelligence-driven early warning systems.

The state of the art for physical hazard prediction from weather and climate requires expensive km-scale numerical simulations driven by coarser resolution global inputs. Here, a generative diffusion architecture is explored for downscaling such global inputs to km-scale, as a cost-effective machine learning alternative. The model is trained to predict 2km data from a regional weather model over Taiwan, conditioned on a 25km global reanalysis. To address the large resolution ratio, different physics involved at different scales and prediction of channels beyond those in the input data, we employ a two-step approach where a UNet predicts the mean and a corrector diffusion (CorrDiff) model predicts the residual. CorrDiff exhibits encouraging skill in bulk MAE and CRPS scores. The predicted spectra and distributions from CorrDiff faithfully recover important power law relationships in the target data. Case studies of coherent weather phenomena show that CorrDiff can help sharpen wind and temperature gradients that co-locate with intense rainfall in cold front, and can help intensify typhoons and synthesize rain band structures. Calibration of model uncertainty remains challenging. The prospect of unifying methods like CorrDiff with coarser resolution global weather models implies a potential for global-to-regional multi-scale machine learning simulation.

Quality analysis of weather forecasts is an essential topic in meteorology. Although traditional score-based evaluation metrics can quantify certain forecast errors, they are still far from meteorological experts in terms of descriptive capability, interpretability, and understanding of dynamic evolution. With the rapid development of Multi-modal Large Language Models (MLLMs), these models become potential tools to overcome the above challenges. In this work, we introduce an MLLM-based weather forecast analysis method, RadarQA, integrating key physical attributes with detailed assessment reports. We introduce a novel and comprehensive task paradigm for multi-modal quality analysis, encompassing both single frame and sequence, under both rating and assessment scenarios. To support training and benchmarking, we design a hybrid annotation pipeline that combines human expert labeling with automated heuristics. With such an annotation method, we construct RQA-70K, a large-scale dataset with varying difficulty levels for radar forecast quality evaluation. We further design a multi-stage training strategy that iteratively improves model performance at each stage. Extensive experiments show that RadarQA outperforms existing general MLLMs across all evaluation settings, highlighting its potential for advancing quality analysis in weather prediction.

Severe convective weather events, such as hail, tornadoes, and thunderstorms, often occur quickly yet cause significant damage, costing billions of dollars every year. This highlights the importance of forecasting severe weather threats hours in advance to better prepare meteorologists and residents in at-risk areas. Can modern large foundation models perform such forecasting? Existing weather benchmarks typically focus only on predicting time-series changes in certain weather parameters (e.g., temperature, moisture) with text-only features. In this work, we introduce WeatherQA, the first multimodal dataset designed for machines to reason about complex combinations of weather parameters (a.k.a., ingredients) and predict severe weather in real-world scenarios. The dataset includes over 8,000 (multi-images, text) pairs for diverse severe weather events. Each pair contains rich information crucial for forecasting -- the images describe the ingredients capturing environmental instability, surface observations, and radar reflectivity, and the text contains forecast analyses written by human experts. With WeatherQA, we evaluate state-of-the-art vision language models, including GPT4, Claude3.5, Gemini-1.5, and a fine-tuned Llama3-based VLM, by designing two challenging tasks: (1) multi-choice QA for predicting affected area and (2) classification of the development potential of severe convection. These tasks require deep understanding of domain knowledge (e.g., atmospheric dynamics) and complex reasoning over multimodal data (e.g., interactions between weather parameters). We show a substantial gap between the strongest VLM, GPT4o, and human reasoning. Our comprehensive case study with meteorologists further reveals the weaknesses of the models, suggesting that better training and data integration are necessary to bridge this gap. WeatherQA link: https://github.com/chengqianma/WeatherQA.

Earth Observation (EO) forecasting aims to predict future Earth surface dynamics from satellite observations under changing meteorological conditions. In this paper, we view this task as a partially observed, weather-driven world modeling problem, in which weather acts as a conditioning signal, while forecasting remains uncertain due to sparse observations and unobserved land-surface states. However, existing methods do not fully capture this setting: deterministic models collapse uncertainty into a single future prediction, while diffusion-based methods typically treat weather variables as undifferentiated conditioning signals, and existing benchmarks focus mainly on reconstruction accuracy rather than whether forecasts respond correctly to changed weather forcing.We introduce EO-WM, a video diffusion transformer for multispectral EO forecasting. EO-WM incorporates a physically informed conditioning framework that represents meteorological forcing through a climatological baseline, weather anomalies, and cumulative physical stress signals. Specifically, it separates baseline and anomaly through distinct conditioning pathways, and accumulates anomalous forcing over time to capture sustained heat and drought stress. To evaluate weather-response behavior beyond standard metrics, we introduce two diagnostic benchmarks: an Extreme Summer Benchmark for severity-aware prediction of vegetation degradation under extreme weather, and a Seasonal Matched-Pair Benchmark for testing response fidelity under changed weather forcing. Experiments show that EO-WM reduces the error in predicted Normalized Difference Vegetation Index (NDVI) decline amplitude by a relative 5.63% and improves directional hit rate by a relative 7.80%, while remaining competitive on standard pixel-level metrics. The benchmarks and model will be made open-source at https://github.com/Luo-Z13/EO-WM.

A primary goal of the National Oceanic and Atmospheric Administration (NOAA) Warn-on-Forecast (WoF) project is to provide rapidly updating probabilistic guidance to human forecasters for short-term (e.g., 0-3 h) severe weather forecasts. Maximizing the usefulness of probabilistic severe weather guidance from an ensemble of convection-allowing model forecasts requires calibration. In this study, we compare the skill of a simple method using updraft helicity against a series of machine learning (ML) algorithms for calibrating WoFS severe weather guidance. ML models are often used to calibrate severe weather guidance since they leverage multiple variables and discover useful patterns in complex datasets. \indent Our dataset includes WoF System (WoFS) ensemble forecasts available every 5 minutes out to 150 min of lead time from the 2017-2019 NOAA Hazardous Weather Testbed Spring Forecasting Experiments (81 dates). Using a novel ensemble storm track identification method, we extracted three sets of predictors from the WoFS forecasts: intra-storm state variables, near-storm environment variables, and morphological attributes of the ensemble storm tracks. We then trained random forests, gradient-boosted trees, and logistic regression algorithms to predict which WoFS 30-min ensemble storm tracks will correspond to a tornado, severe hail, and/or severe wind report. For the simple method, we extracted the ensemble probability of 2-5 km updraft helicity (UH) exceeding a threshold (tuned per severe weather hazard) from each ensemble storm track. The three ML algorithms discriminated well for all three hazards and produced more reliable probabilities than the UH-based predictions. Overall, the results suggest that ML-based calibrations of dynamical ensemble output can improve short term, storm-scale severe weather probabilistic guidance

Storm-scale convection-allowing models (CAMs) are an important tool for predicting the evolution of thunderstorms and mesoscale convective systems that result in damaging extreme weather. By explicitly resolving convective dynamics within the atmosphere they afford meteorologists the nuance needed to provide outlook on hazard. Deep learning models have thus far not proven skilful at km-scale atmospheric simulation, despite being competitive at coarser resolution with state-of-the-art global, medium-range weather forecasting. We present a generative diffusion model called StormCast, which emulates the high-resolution rapid refresh (HRRR) model-NOAA's state-of-the-art 3km operational CAM. StormCast autoregressively predicts 99 state variables at km scale using a 1-hour time step, with dense vertical resolution in the atmospheric boundary layer, conditioned on 26 synoptic variables. We present evidence of successfully learnt km-scale dynamics including competitive 1-6 hour forecast skill for composite radar reflectivity alongside physically realistic convective cluster evolution, moist updrafts, and cold pool morphology. StormCast predictions maintain realistic power spectra for multiple predicted variables across multi-hour forecasts. Together, these results establish the potential for autoregressive ML to emulate CAMs -- opening up new km-scale frontiers for regional ML weather prediction and future climate hazard dynamical downscaling.

Most nowcasting systems, built on radar reflectivity, focus on current precipitation, ignoring the atmospheric precursors -- such as low-level convergence, turbulent eddies, and latent heating -- that offer a fleeting window to foresee storm birth. We introduce MeteoLogist, a physics-inspired radar intelligence framework that models the full life cycle of convection -- from its precursors to organized storm evolution. However, exploiting these precursors is non-trivial: they originate from multiple meteorological drivers -- thermodynamic, kinematic, and microphysical -- that evolve asynchronously (C1) and remain spatially fragmented (C2). To this end, MeteoLogist designs three tightly integrated components. The Physics-Tailored Encoders process radar echoes according to their intrinsic physical scales and semantics, forming thermodynamic, kinematic, and microphysical streams that capture distinct dynamical regimes. The Temporal-Phase Aligner addresses C1 by leveraging causal temporal attention to capture when and how different drivers interact and activate. The Cross-Field Spatial Aggregator addresses C2 through cross-regional fusion, aligning weak and scattered precursors across neighboring cells to expose upstream triggers and enforce spatial coherence. Evaluated on 3D-NEXRAD (2020--2022, US-wide), MeteoLogist boosts high-impact detection (CSI40) by +9.7% over strong baselines, and achieves a remarkable 37.67% gain during the storm-developing stage -- demonstrating true foresight in sensing storms before they appear. The code can be found in the supplementary material.

Applications such as weather forecasting and personalized medicine demand models that output calibrated probability estimates---those representative of the true likelihood of a prediction. Most models are not calibrated out of the box but are recalibrated by post-processing model outputs. We find in this work that popular recalibration methods like Platt scaling and temperature scaling are (i) less calibrated than reported, and (ii) current techniques cannot estimate how miscalibrated they are. An alternative method, histogram binning, has measurable calibration error but is sample inefficient---it requires O(B/ε^2) samples, compared to O(1/ε^2) for scaling methods, where B is the number of distinct probabilities the model can output. To get the best of both worlds, we introduce the scaling-binning calibrator, which first fits a parametric function to reduce variance and then bins the function values to actually ensure calibration. This requires only O(1/ε^2 + B) samples. Next, we show that we can estimate a model's calibration error more accurately using an estimator from the meteorological community---or equivalently measure its calibration error with fewer samples (O(B) instead of O(B)). We validate our approach with multiclass calibration experiments on CIFAR-10 and ImageNet, where we obtain a 35% lower calibration error than histogram binning and, unlike scaling methods, guarantees on true calibration. In these experiments, we also estimate the calibration error and ECE more accurately than the commonly used plugin estimators. We implement all these methods in a Python library: https://pypi.org/project/uncertainty-calibration

Global climate models represent small-scale processes such as clouds and convection using quasi-empirical models known as parameterizations, and these parameterizations are a leading cause of uncertainty in climate projections. A promising alternative approach is to use machine learning to build new parameterizations directly from high-resolution model output. However, parameterizations learned from three-dimensional model output have not yet been successfully used for simulations of climate. Here we use a random forest to learn a parameterization of subgrid processes from output of a three-dimensional high-resolution atmospheric model. Integrating this parameterization into the atmospheric model leads to stable simulations at coarse resolution that replicate the climate of the high-resolution simulation. The parameterization obeys physical constraints and captures important statistics such as precipitation extremes. The ability to learn from a fully three-dimensional simulation presents an opportunity for learning parameterizations from the wide range of global high-resolution simulations that are now emerging.

Kilometer-scale simulations of the atmosphere are an important tool for assessing local weather extremes and climate impacts, but computational expense limits their use to small regions, short periods, and limited ensembles. Machine learning offers a pathway to efficiently emulate these high-resolution simulations. Here we introduce HiRO-ACE, a two-stage AI modeling framework combining a stochastic version of the Ai2 Climate Emulator (ACE2S) with diffusion-based downscaling (HiRO) to generate 3 km precipitation fields over arbitrary regions of the globe. Both components are trained on data derived from a decade of atmospheric simulation by X-SHiELD, a 3 km global storm-resolving model. HiRO performs a 32x downscaling--generating 3 km 6-hourly precipitation from coarse 100 km inputs by training on paired high-resolution and coarsened X-SHiELD outputs. ACE2S is a 1^circ times 1^circ (sim100 km) stochastic autoregressive global atmosphere emulator that maintains grid-scale precipitation variability consistent with coarsened X-SHiELD, enabling its outputs to be ingested by HiRO without additional tuning. HiRO-ACE reproduces the distribution of extreme precipitation rates through the 99.99th percentile, with time-mean precipitation biases below 10% almost everywhere. The framework generates plausible tropical cyclones, fronts, and convective events from poorly resolved coarse inputs. Its computational efficiency allows generation of 6-hourly high-resolution regional precipitation for decades of simulated climate within a single day using one H100 GPU, while the probabilistic design enables ensemble generation for quantifying uncertainty. This establishes an AI-enabled pathway for affordably leveraging the realism of expensive km-scale simulations to support local climate adaptation planning and extreme event risk assessment.

We present HiRO-ACEv2 (High Resolution Output Ai2 Climate Emulator), a two-stage framework for AI emulation of the 3~km resolution X-SHiELD global storm-resolving model (GSRM), and highlight its ability to generate large ensembles of data for studying the characteristics of tropical cyclones and extreme events in high-resolution simulations at an inference computational cost over 300 times lower than that of traditional numerical GSRMs. HiRO-ACEv2 expands upon the precipitation-only HiRO-ACEv1 model to generate coherent precipitation, 10~m winds, and sea level pressure outputs, enabling a broader range of events to be simulated at high-resolution. Fine-resolution predictions are generated by running an autoregressive emulator of coarsened X-SHiELD at 100 km, whose multivariate outputs are regionally downscaled to 3~km resolution via a separately trained diffusion model. Particular importance is placed on capturing the statistics of extreme events during the diffusion downscaling step. Our ability to match the tails of distributions and generate realistic-looking extreme events in both the `perfect prediction' case as well as in free-running emulator rollouts is improved via the use of multiple denoisers at inference time and several updates to the data sampling, noise sampling, and loss weighting during training. HiRO-ACEv2 closely matches the high-resolution reference distributions of precipitation and near-surface winds out to their 99.9999th percentile values, and broadly tracks the reference distribution of tropical cyclone intensities.

Since the weather is chaotic, forecasts aim to predict the distribution of future states rather than make a single prediction. Recently, multiple data driven weather models have emerged claiming breakthroughs in skill. However, these have mostly been benchmarked using deterministic skill scores, and little is known about their probabilistic skill. Unfortunately, it is hard to fairly compare AI weather models in a probabilistic sense, since variations in choice of ensemble initialization, definition of state, and noise injection methodology become confounding. Moreover, even obtaining ensemble forecast baselines is a substantial engineering challenge given the data volumes involved. We sidestep both problems by applying a decades-old idea -- lagged ensembles -- whereby an ensemble can be constructed from a moderately-sized library of deterministic forecasts. This allows the first parameter-free intercomparison of leading AI weather models' probabilistic skill against an operational baseline. The results reveal that two leading AI weather models, i.e. GraphCast and Pangu, are tied on the probabilistic CRPS metric even though the former outperforms the latter in deterministic scoring. We also reveal how multiple time-step loss functions, which many data-driven weather models have employed, are counter-productive: they improve deterministic metrics at the cost of increased dissipation, deteriorating probabilistic skill. This is confirmed through ablations applied to a spherical Fourier Neural Operator (SFNO) approach to AI weather forecasting. Separate SFNO ablations modulating effective resolution reveal it has a useful effect on ensemble dispersion relevant to achieving good ensemble calibration. We hope these and forthcoming insights from lagged ensembles can help guide the development of AI weather forecasts and have thus shared the diagnostic code.

Diffusion models have been widely adopted in image generation, producing higher-quality and more diverse samples than generative adversarial networks (GANs). We introduce a latent diffusion model (LDM) for precipitation nowcasting - short-term forecasting based on the latest observational data. The LDM is more stable and requires less computation to train than GANs, albeit with more computationally expensive generation. We benchmark it against the GAN-based Deep Generative Models of Rainfall (DGMR) and a statistical model, PySTEPS. The LDM produces more accurate precipitation predictions, while the comparisons are more mixed when predicting whether the precipitation exceeds predefined thresholds. The clearest advantage of the LDM is that it generates more diverse predictions than DGMR or PySTEPS. Rank distribution tests indicate that the distribution of samples from the LDM accurately reflects the uncertainty of the predictions. Thus, LDMs are promising for any applications where uncertainty quantification is important, such as weather and climate.

We evaluate the climate simulation capabilities of ArchesWeather and ArchesWeatherGen, two machine learning models originally trained for weather forecasting and evaluated up to a 10-day lead time. ArchesWeather is a deterministic model, while ArchesWeatherGen is a probabilistic flow-matching model leveraging ArchesWeather's forecasts, enabling ensemble-based uncertainty quantification. In this work, we adapt these models to act as forced atmospheric models by using additional conditioning on the monthly mean sea surface temperature (SST) and sea ice cover (SIC) as boundary conditions. In particular, we follow the AI Model Intercomparison Project (AIMIP) Phase 1 protocol, which, analogous to the Atmospheric Model Intercomparison Project (AMIP), proposes a standardized experimental setup to evaluate the climate skill of ML-based forced atmospheric models. We present a comprehensive evaluation of both models under these conditions, including comparison against numerical climate models, ablation studies that examine key design choices in the extension, and an analysis of forced versus unforced configurations. Despite being originally developed for weather forecasting, we demonstrate that forced configurations of ArchesWeather and ArchesWeatherGen produce stable long-term climate simulations, have a stable annual cycle, and capture the drift of many climate variables. The models faithfully reproduce ERA5's climatology, large-scale circulations and interannual variability, and they capture the tails of the distributions.

We study whether deterministic AI weather prediction (AIWP) models issue more informative forecasts for extreme weather events than deterministic numerical weather prediction (NWP) models. The deterministic model output is subjected to statistical post-processing via isotonic distributional regression (IDR), or EasyUQ, before the resulting probabilistic forecasts are assessed using weighted versions of the continuous ranked probability score (CRPS). This extends the Potential CRPS (PCRPS) measure proposed by Gneiting et al. (2026) to focus on extreme outcomes. Since IDR exhibits optimality properties with respect to weighted versions of the CRPS, the proposed approach inherits desirable properties of the PCRPS, and, in particular, facilitates fair comparisons between data-driven and physics-based models when forecasting extreme weather events. We apply this evaluation framework to forecasts in the WeatherBench 2 dataset issued by the AIWP models GraphCast, Pangu-Weather, and FuXi, with the ECMWF's high-resolution NWP model serving as a physics-based reference. The forecast models are compared when predicting mean sea level pressure, temperature, wind speed, and precipitation extremes, defined as exceedances or non-exceedances of thresholds obtained from historical observation data. We additionally study forecast performance when predicting record-breaking events, though the ordering of the different methods is largely insensitive to the thresholds on which emphasis is placed. We find that AIWP models, particularly FuXi, result in the most informative forecasts for extreme weather events across most settings, suggesting that AIWP models have the potential to outperform NWP models when forecasting extremes.

Kilometer-scale convection shapes precipitation extremes, tropical organization, and cloud feedbacks, but most global atmospheric models approximate these processes at 25-100 km resolution. Global storm-resolving physics models resolve convective systems explicitly, but at a cost -- roughly one MWh per simulated day on exascale supercomputers -- that limits long-duration simulation. We introduce STRATA (Storm-resolving Tile-based autoRegressive Atmosphere Transformer Architecture), the first autoregressive AI emulator for global storm-resolving atmospheric dynamics. STRATA is trained on the highest-resolution atmospheric dataset yet used for global AI emulation: 17 days of SCREAM physics-model output at 4.9-km resolution (~25 million grid cells) sampled every 10 minutes. Our central premise is that on 10-minute timescales atmospheric dynamics are predominantly local, so training on small spatial tiles trades scarce global temporal samples for abundant local spatial samples and enables global rollout via overlapping-tile blending. STRATA combines 3D patch embedding and local 3D neighborhood attention, a novel Stereographic Rotary Position Embedding (StereoRoPE) for grid-invariant encoding, and a pixel-space de-aliasing decoder that suppresses patch-scale rollout artifacts. An iso-FLOP scaling study reveals that km-scale emulation requires ~10x more FLOPs per grid point than coarse-resolution AI weather models, consistent with the higher information density of convective-scale dynamics. Trained on only 17 days of data, STRATA produces stable 24-hour global rollouts with realistic km-scale dynamics across diverse regimes, though large-scale biases develop with lead time. It achieves 48 simulation days per megawatt-hour -- about 50 times better energy efficiency than the SCREAM physics model -- and 741 simulated days per wall-clock day at 512 H100 GPUs. Code and dataset are publicly available.

Global medium-range weather forecasting is critical to decision-making across many social and economic domains. Traditional numerical weather prediction uses increased compute resources to improve forecast accuracy, but cannot directly use historical weather data to improve the underlying model. We introduce a machine learning-based method called "GraphCast", which can be trained directly from reanalysis data. It predicts hundreds of weather variables, over 10 days at 0.25 degree resolution globally, in under one minute. We show that GraphCast significantly outperforms the most accurate operational deterministic systems on 90% of 1380 verification targets, and its forecasts support better severe event prediction, including tropical cyclones, atmospheric rivers, and extreme temperatures. GraphCast is a key advance in accurate and efficient weather forecasting, and helps realize the promise of machine learning for modeling complex dynamical systems.

Modeling weather and climate is an essential endeavor to understand the near- and long-term impacts of climate change, as well as inform technology and policymaking for adaptation and mitigation efforts. In recent years, there has been a surging interest in applying data-driven methods based on machine learning for solving core problems such as weather forecasting and climate downscaling. Despite promising results, much of this progress has been impaired due to the lack of large-scale, open-source efforts for reproducibility, resulting in the use of inconsistent or underspecified datasets, training setups, and evaluations by both domain scientists and artificial intelligence researchers. We introduce ClimateLearn, an open-source PyTorch library that vastly simplifies the training and evaluation of machine learning models for data-driven climate science. ClimateLearn consists of holistic pipelines for dataset processing (e.g., ERA5, CMIP6, PRISM), implementation of state-of-the-art deep learning models (e.g., Transformers, ResNets), and quantitative and qualitative evaluation for standard weather and climate modeling tasks. We supplement these functionalities with extensive documentation, contribution guides, and quickstart tutorials to expand access and promote community growth. We have also performed comprehensive forecasting and downscaling experiments to showcase the capabilities and key features of our library. To our knowledge, ClimateLearn is the first large-scale, open-source effort for bridging research in weather and climate modeling with modern machine learning systems. Our library is available publicly at https://github.com/aditya-grover/climate-learn.

We present a probabilistic data-driven weather model capable of providing an ensemble of high spatial resolution realizations of 87 variables at arbitrary forecast length and ensemble size. The model uses a stretched grid, dedicating 2.5 km resolution to a region of interest, and 31 km resolution elsewhere. Based on a stochastic encoder-decoder architecture, the model is trained using a loss function based on the Continuous Ranked Probability Score (CRPS) evaluated point-wise in real and spectral space. The spectral loss components is shown to be necessary to create fields that are spatially coherent. The model is compared to high-resolution operational numerical weather prediction forecasts from the MetCoOp Ensemble Prediction System (MEPS), showing competitive forecasts when evaluated against observations from surface weather stations. The model produced fields that are more spatially coherent than mean squared error based models and CRPS based models without the spectral component in the loss.

Precipitation nowcasting is a critical spatio-temporal prediction task for society to prevent severe damage owing to extreme weather events. Despite the advances in this field, the complex and stochastic nature of this task still poses challenges to existing approaches. Specifically, deterministic models tend to produce blurry predictions while generative models often struggle with poor accuracy. In this paper, we present a simple yet effective model architecture termed STLDM, a diffusion-based model that learns the latent representation from end to end alongside both the Variational Autoencoder and the conditioning network. STLDM decomposes this task into two stages: a deterministic forecasting stage handled by the conditioning network, and an enhancement stage performed by the latent diffusion model. Experimental results on multiple radar datasets demonstrate that STLDM achieves superior performance compared to the state of the art, while also improving inference efficiency. The code is available in https://github.com/sqfoo/stldm_official.

Precipitation nowcasting is a short-range forecast of rain/snow (up to 2 hours), often displayed on top of the geographical map by the weather service. Modern precipitation nowcasting algorithms rely on the extrapolation of observations by ground-based radars via optical flow techniques or neural network models. Dependent on these radars, typical nowcasting is limited to the regions around their locations. We have developed a method for precipitation nowcasting based on geostationary satellite imagery and incorporated the resulting data into the Yandex.Weather precipitation map (including an alerting service with push notifications for products in the Yandex ecosystem), thus expanding its coverage and paving the way to a truly global nowcasting service.

General circulation models (GCMs) are the foundation of weather and climate prediction. GCMs are physics-based simulators which combine a numerical solver for large-scale dynamics with tuned representations for small-scale processes such as cloud formation. Recently, machine learning (ML) models trained on reanalysis data achieved comparable or better skill than GCMs for deterministic weather forecasting. However, these models have not demonstrated improved ensemble forecasts, or shown sufficient stability for long-term weather and climate simulations. Here we present the first GCM that combines a differentiable solver for atmospheric dynamics with ML components, and show that it can generate forecasts of deterministic weather, ensemble weather and climate on par with the best ML and physics-based methods. NeuralGCM is competitive with ML models for 1-10 day forecasts, and with the European Centre for Medium-Range Weather Forecasts ensemble prediction for 1-15 day forecasts. With prescribed sea surface temperature, NeuralGCM can accurately track climate metrics such as global mean temperature for multiple decades, and climate forecasts with 140 km resolution exhibit emergent phenomena such as realistic frequency and trajectories of tropical cyclones. For both weather and climate, our approach offers orders of magnitude computational savings over conventional GCMs. Our results show that end-to-end deep learning is compatible with tasks performed by conventional GCMs, and can enhance the large-scale physical simulations that are essential for understanding and predicting the Earth system.

Studying low-likelihood high-impact extreme weather events in a warming world is a significant and challenging task for current ensemble forecasting systems. While these systems presently use up to 100 members, larger ensembles could enrich the sampling of internal variability. They may capture the long tails associated with climate hazards better than traditional ensemble sizes. Due to computational constraints, it is infeasible to generate huge ensembles (comprised of 1,000-10,000 members) with traditional, physics-based numerical models. In this two-part paper, we replace traditional numerical simulations with machine learning (ML) to generate hindcasts of huge ensembles. In Part I, we construct an ensemble weather forecasting system based on Spherical Fourier Neural Operators (SFNO), and we discuss important design decisions for constructing such an ensemble. The ensemble represents model uncertainty through perturbed-parameter techniques, and it represents initial condition uncertainty through bred vectors, which sample the fastest growing modes of the forecast. Using the European Centre for Medium-Range Weather Forecasts Integrated Forecasting System (IFS) as a baseline, we develop an evaluation pipeline composed of mean, spectral, and extreme diagnostics. Using large-scale, distributed SFNOs with 1.1 billion learned parameters, we achieve calibrated probabilistic forecasts. As the trajectories of the individual members diverge, the ML ensemble mean spectra degrade with lead time, consistent with physical expectations. However, the individual ensemble members' spectra stay constant with lead time. Therefore, these members simulate realistic weather states, and the ML ensemble thus passes a crucial spectral test in the literature. The IFS and ML ensembles have similar Extreme Forecast Indices, and we show that the ML extreme weather forecasts are reliable and discriminating.

Data assimilation (DA) estimates the state of an evolving dynamical system from noisy, partial observations, and is widely used in scientific simulation as well as weather and climate science. In practice, filtering methods rely on frame-to-frame transition models. However, these models are fragile when observations are non-Markovian (when they form only a partial slice of a higher-dimensional latent state as in real-world weather data): they tend to accumulate errors over long horizons. At the same time, learned DA methods typically commit to a single regime, either filtering (nowcasting, real-time forecasting) or smoothing (retrospective reanalysis), which splits what should be a shared prior across application-specific pipelines. To address both issues, we introduce ForcingDAS, a unified and robust DA framework. Built on Diffusion Forcing with an independent noise level assigned to each frame, ForcingDAS learns a joint-trajectory prior instead of frame-to-frame transitions. This allows it to capture long-horizon temporal dependencies and reduce error accumulation. In addition, the same trained model spans the full filtering to smoothing spectrum at inference time. Specifically, nowcasting, fixed-lag smoothing, and batch reanalysis are selected through the inference schedule alone, without retraining. We evaluate ForcingDAS on 2D Navier-Stokes vorticity, precipitation nowcasting, and global atmospheric state estimation. Across all settings, a single model is competitive with or outperforms both learned and classical baselines that are specialized for individual regimes, with the largest gains observed on real-world weather benchmarks.

In Part I, we created an ensemble based on Spherical Fourier Neural Operators. As initial condition perturbations, we used bred vectors, and as model perturbations, we used multiple checkpoints trained independently from scratch. Based on diagnostics that assess the ensemble's physical fidelity, our ensemble has comparable performance to operational weather forecasting systems. However, it requires orders of magnitude fewer computational resources. Here in Part II, we generate a huge ensemble (HENS), with 7,424 members initialized each day of summer 2023. We enumerate the technical requirements for running huge ensembles at this scale. HENS precisely samples the tails of the forecast distribution and presents a detailed sampling of internal variability. HENS has two primary applications: (1) as a large dataset with which to study the statistics and drivers of extreme weather and (2) as a weather forecasting system. For extreme climate statistics, HENS samples events 4sigma away from the ensemble mean. At each grid cell, HENS increases the skill of the most accurate ensemble member and enhances coverage of possible future trajectories. As a weather forecasting model, HENS issues extreme weather forecasts with better uncertainty quantification. It also reduces the probability of outlier events, in which the verification value lies outside the ensemble forecast distribution.

Full-complexity Earth system models (ESMs) are computationally very expensive, limiting their use in exploring the climate outcomes of multiple emission pathways. More efficient emulators that approximate ESMs can directly map emissions onto climate outcomes, and benchmarks are being used to evaluate their accuracy on standardized tasks and datasets. We investigate a popular benchmark in data-driven climate emulation, ClimateBench, on which deep learning-based emulators are currently achieving the best performance. We implement a linear regression-based emulator, akin to pattern scaling, and find that it outperforms the incumbent 100M-parameter deep learning foundation model, ClimaX, on 3 out of 4 regionally-resolved surface-level climate variables. While emulating surface temperature is expected to be predominantly linear, this result is surprising for emulating precipitation. We identify that this outcome is a result of high levels of internal variability in the benchmark targets. To address internal variability, we update the benchmark targets with ensemble averages from the MPI-ESM1.2-LR model that contain 50 instead of 3 climate simulations per emission pathway. Using the new targets, we show that linear pattern scaling continues to be more accurate on temperature, but can be outperformed by a deep learning-based model for emulating precipitation. We publish our code, data, and an interactive tutorial at github.com/blutjens/climate-emulator.

The forecast accuracy of machine learning (ML) weather prediction models is improving rapidly, leading many to speak of a "second revolution in weather forecasting". With numerous methods being developed and limited physical guarantees offered by ML models, there is a critical need for a comprehensive evaluation of these emerging techniques. While this need has been partly fulfilled by benchmark datasets, they provide little information on rare and impactful extreme events or on compound impact metrics, for which model accuracy might degrade due to misrepresented dependencies between variables. To address these issues, we compare ML weather prediction models (GraphCast, PanguWeather, and FourCastNet) and ECMWF's high-resolution forecast system (HRES) in three case studies: the 2021 Pacific Northwest heatwave, the 2023 South Asian humid heatwave, and the North American winter storm in 2021. We find that ML weather prediction models locally achieve similar accuracy to HRES on the record-shattering Pacific Northwest heatwave but underperform when aggregated over space and time. However, they forecast the compound winter storm substantially better. We also highlight structural differences in how the errors of HRES and the ML models build up to that event. The ML forecasts lack important variables for a detailed assessment of the health risks of the 2023 humid heatwave. Using a possible substitute variable, prediction errors show spatial patterns with the highest danger levels over Bangladesh being underestimated by the ML models. Generally, case-study-driven, impact-centric evaluation can complement existing research, increase public trust, and aid in developing reliable ML weather prediction models.

Most state-of-the-art approaches for weather and climate modeling are based on physics-informed numerical models of the atmosphere. These approaches aim to model the non-linear dynamics and complex interactions between multiple variables, which are challenging to approximate. Additionally, many such numerical models are computationally intensive, especially when modeling the atmospheric phenomenon at a fine-grained spatial and temporal resolution. Recent data-driven approaches based on machine learning instead aim to directly solve a downstream forecasting or projection task by learning a data-driven functional mapping using deep neural networks. However, these networks are trained using curated and homogeneous climate datasets for specific spatiotemporal tasks, and thus lack the generality of numerical models. We develop and demonstrate ClimaX, a flexible and generalizable deep learning model for weather and climate science that can be trained using heterogeneous datasets spanning different variables, spatio-temporal coverage, and physical groundings. ClimaX extends the Transformer architecture with novel encoding and aggregation blocks that allow effective use of available compute while maintaining general utility. ClimaX is pre-trained with a self-supervised learning objective on climate datasets derived from CMIP6. The pre-trained ClimaX can then be fine-tuned to address a breadth of climate and weather tasks, including those that involve atmospheric variables and spatio-temporal scales unseen during pretraining. Compared to existing data-driven baselines, we show that this generality in ClimaX results in superior performance on benchmarks for weather forecasting and climate projections, even when pretrained at lower resolutions and compute budgets.

Forecasting weather and climate events is crucial for making appropriate measures to mitigate environmental hazards and minimize losses. However, existing environmental forecasting research focuses narrowly on predicting numerical meteorological variables (e.g., temperature), neglecting the translation of these variables into actionable textual narratives of events and their consequences. To bridge this gap, we proposed Weather and Climate Event Forecasting (WCEF), a new task that leverages numerical meteorological raster data and textual event data to predict weather and climate events. This task is challenging to accomplish due to difficulties in aligning multimodal data and the lack of supervised datasets. To address these challenges, we present CLLMate, the first multimodal dataset for WCEF, using 26,156 environmental news articles aligned with ERA5 reanalysis data. We systematically benchmark 23 existing MLLMs on CLLMate, including closed-source, open-source, and our fine-tuned models. Our experiments reveal the advantages and limitations of existing MLLMs and the value of CLLMate for the training and benchmarking of the WCEF task.

We present a stochastic coupled emulator of E3SM version 3, built on the SamudrACE framework, which couples an atmosphere emulator (ACE2) with a full-depth ocean emulator (Samudra). We replace the deterministic atmosphere emulator with its stochastic counterpart, ACE2S, and fine-tune the coupled system with a probabilistic objective, so that the atmosphere acts as a source of internal variability for the ocean. Trained on 105 years of a pre-industrial control simulation and evaluated on an independent 400 years, the emulator reproduces E3SMv3's mean climate state with biases much smaller than existing model-to-observation differences. Relative to a deterministic baseline, stochastic training maintains internal variability across timescales, most notably in the ENSO power spectrum, eddy-rich SST anomalies, and sea ice variability in the marginal ice zone. The emulator captures daily precipitation accurately up to the 99.99th percentile, but underestimates the rarest tropical extremes. These results show that stochastic coupled emulators can reproduce long-timescale variability with high fidelity, while extrapolation to unseen extremes remains a key challenge.

Data-driven approaches, most prominently deep learning, have become powerful tools for prediction in many domains. A natural question to ask is whether data-driven methods could also be used to predict global weather patterns days in advance. First studies show promise but the lack of a common dataset and evaluation metrics make inter-comparison between studies difficult. Here we present a benchmark dataset for data-driven medium-range weather forecasting, a topic of high scientific interest for atmospheric and computer scientists alike. We provide data derived from the ERA5 archive that has been processed to facilitate the use in machine learning models. We propose simple and clear evaluation metrics which will enable a direct comparison between different methods. Further, we provide baseline scores from simple linear regression techniques, deep learning models, as well as purely physical forecasting models. The dataset is publicly available at https://github.com/pangeo-data/WeatherBench and the companion code is reproducible with tutorials for getting started. We hope that this dataset will accelerate research in data-driven weather forecasting.

Weather forecasting traditionally relies on numerical weather prediction (NWP) systems that integrates global observational systems, data assimilation (DA), and forecasting models. Despite steady improvements in forecast accuracy over recent decades, further advances are increasingly constrained by high computational costs, the underutilization of vast observational datasets, and the challenges of obtaining finer resolution. These limitations, alongside the uneven distribution of observational networks, result in global disparities in forecast accuracy, leaving some regions vulnerable to extreme weather. Recent advances in machine learning present a promising alternative, providing more efficient and accurate forecasts using the same initial conditions as NWP. However, current machine learning models still depend on the initial conditions generated by NWP systems, which require extensive computational resources and expertise. Here we introduce FuXi Weather, a machine learning weather forecasting system that assimilates data from multiple satellites. Operating on a 6-hourly DA and forecast cycle, FuXi Weather generates reliable and accurate 10-day global weather forecasts at a spatial resolution of 0.25^circ. FuXi Weather is the first system to achieve all-grid, all-surface, all-channel, and all-sky DA and forecasting, extending skillful forecast lead times beyond those of the European Centre for Medium-range Weather Forecasts (ECMWF) high-resolution forecasts (HRES) while using significantly fewer observations. FuXi Weather consistently outperforms ECMWF HRES in observation-sparse regions, such as central Africa, demonstrating its potential to improve forecasts where observational infrastructure is limited.

Kilometer-scale modeling of global atmosphere dynamics enables fine-grained weather forecasting and decreases the risk of disastrous weather and climate activity. Therefore, building a kilometer-scale global forecast model is a persistent pursuit in the meteorology domain. Active international efforts have been made in past decades to improve the spatial resolution of numerical weather models. Nonetheless, developing the higher resolution numerical model remains a long-standing challenge due to the substantial consumption of computational resources. Recent advances in data-driven global weather forecasting models utilize reanalysis data for model training and have demonstrated comparable or even higher forecasting skills than numerical models. However, they are all limited by the resolution of reanalysis data and incapable of generating higher-resolution forecasts. This work presents FengWu-GHR, the first data-driven global weather forecasting model running at the 0.09^{circ} horizontal resolution. FengWu-GHR introduces a novel approach that opens the door for operating ML-based high-resolution forecasts by inheriting prior knowledge from a pretrained low-resolution model. The hindcast of weather prediction in 2022 indicates that FengWu-GHR is superior to the IFS-HRES. Furthermore, evaluations on station observations and case studies of extreme events support the competitive operational forecasting skill of FengWu-GHR at the high resolution.

Predicting where floodwater goes and how deep it gets, at high resolution and across large domains, remains computationally expensive with conventional hydraulic solvers, while purely data-driven surrogates are fast but lack physical guarantees and generalize poorly beyond their training events. We present Inunda, a GPU-native flood inundation model that solves the two-dimensional shallow water equations. Inunda uses a mass-conservative local-inertial scheme and runs multi-day events over millions of cells in minutes on a single GPU. Because every operator is autograd-compatible, the solver is differentiable by construction: model parameters can be estimated by gradient descent against gage observations through reverse-mode automatic differentiation of the full simulation. We demonstrate Inunda on three case studies. For a hindcast of Hurricane Harvey (2017) in Harris County, Texas, Inunda matches surveyed high-water marks to a mean absolute error of 0.67 m, competitive with or better than a suite of established flood models, and reaches a median gage water-level Nash Sutcliffe efficiency of +0.72, more than double the +0.31 of the operational National Water Model v3.0. For the July 2025 Central Texas flash flood, Inunda is driven by an 18-member 1-km convection-allowing precipitation ensemble to produce probabilistic flood forecasts whose skill improves systematically as lead time to the crest shortens. For a post-fire flash-flood application in the Rio Ruidoso burn scar, differentiable calibration recovers the saturated hydraulic conductivity as a spatially explicit field at the model's own resolution and traces its multi-year post-fire recovery. Inunda provides an open, end-to-end pipeline for real-event flood modeling that couples the accuracy of physics-based hydraulics with the calibration and coupling advantages of modern differentiable programming.

Climate modeling is reaching unprecedented resolution, producing petabytes of data. AI climate model emulators offer a path to computationally cheap analysis, enabling new scientific insight and scenario planning. Recent advances show promise in faithfully emulating climate data. However, prevailing auto-regressive paradigms are difficult to train on climate time horizons due to drifts, instabilities, and component-coupling challenges. They are hard to scale to high resolution and require sifting through troves of output to identify rare extremes of interest. We present Climate in a Bottle (cBottle), a generative diffusion-based framework emulating global 5 km climate simulations and reanalysis on the HEALPix grid. cBottle samples directly from the full distribution of atmospheric states, avoiding auto-regressive rollout, and is the first to reach this 12.5M-pixel global resolution. It consists of two stages: a coarse-resolution generator conditioned on sea surface temperatures and solar position, followed by a patch-based 16x super-resolution stage. cBottle passes a battery of tests, including diurnal-to-seasonal variability, large-scale modes of variability, tropical cyclone statistics, and trends of climate change and weather extremes. It is a step toward a foundation model: bridging data modalities (reanalysis and simulation), enabling zero-shot bias correction, downscaling, and data infilling. It also enables new interactivity via guided diffusion. For example, we train a tropical cyclone (TC) classifier alongside the generator, guide towards TC states, and obtain physically credible samples. This opens the door to guidance methods for a wide array of user queries and new ways of interacting with climate data.

Understanding controls on Mesoscale Convective Systems (MCSs) is critical for predicting rainfall extremes across scales. Spatial variability of soil moisture (SM) presents such a control, with ~200km dry patches in the Sahel observed to intensify mature MCSs. Here we test MCS sensitivity to spatial scales of surface heterogeneity using a framework of 78 Unified Model experiments initialised from scale-filtered SM. We demonstrate the control of SM heterogeneity on MCS populations, and the mechanistic chain via which spatial variability propagates through surface fluxes to convective boundary layer development and storm environments. When all sub-synoptic SM variability is homogenised, peak MCS counts drop by 23%, whereas maintaining small-scale variability maintains primary initiation rates, reducing the drop in MCS totals. In sensitivity experiments, boundary layer development prior to MCSs is similar to that over mesoscale dry SM anomalies, but driven by cloud-free slots of increased shortwave radiation. This reduces storm numbers and potential predictability.

Accurate weather forecasts are essential across various domains and are safety-critical in extreme weather conditions. Compared to simulation-based forecasting, data-driven approaches show greater efficiency, enabling short-term, high-resolution nowcasting. In particular, diffusion models proved effective in weather nowcasting due to their strong probabilistic foundation. However, existing methods rely on deterministic compression to reduce the complexity of high-dimensional weather data, limiting their ability to capture uncertainty in the decoding process. In this work, we introduce FREUD, a Frame-wise Encoder and United Decoder model based on rectified flow transformers for efficient compression of spatio-temporal weather data. Frame-wise encoding enables continuous forecast updates, while the unified video decoder ensures temporal consistency. Our uncertainty-preserving first stage allows us to capture aleatoric uncertainty via ensembling, which is particularly beneficial for extreme weather events with high decoding variability. We achieve state-of-the-art performance in precipitation nowcasting with a compact latent-space rectified flow transformer on the SEVIR benchmark and show further performance gains by model and test-time scaling. Code available here: https://github.com/CompVis/weather-rf

Warm-sector heavy rainfall often occurs along the coast of South China, and it is usually localized and long-lasting, making it challenging to predict. High-resolution numerical weather prediction (NWP) models are increasingly used to better resolve topographic features and forecast such high-impact weather events. However, when the grid spacing becomes comparable to the length scales of convection, known as the gray zone, the turbulent eddies in the atmospheric boundary layer are only partially resolved and parameterized to some extent. Whether using a convection parameterization (CP) scheme in the gray zone remains controversial. Scale-aware CP schemes are developed to enhance the representation of convective transport within the gray zone. The multi-scale Kain-Fritsch (MSKF) scheme includes modifications that allow for its effective implementation at a grid resolution as high as 2 km. In recent years, there has been an increasing application of machine learning (ML) models to various domains of atmospheric sciences, including the replacement of physical parameterizations with ML models. This work proposes a multi-output bidirectional long short-term memory (Bi-LSTM) model as a replace the scale-aware MSKF CP scheme. The Weather Research and Forecast (WRF) model is used to generate training and testing data over South China at a horizontal resolution of 5 km. Furthermore, the WRF model is coupled with the ML based CP scheme and compared with WRF simulations with original MSKF scheme. The results demonstrate that the Bi-LSTM model can achieve high accuracy, indicating the potential use of ML models to substitute the MSKF scheme in the gray zone.

Machine learning-based weather forecasting models now surpass state-of-the-art numerical weather prediction systems, but training and operating these models at high spatial resolution remains computationally expensive. We present a modular framework that decouples forecasting from spatial resolution by applying learned generative super-resolution as a post-processing step to coarse-resolution forecast trajectories. We formulate super-resolution as a stochastic inverse problem, using a residual formulation to preserve large-scale structure while reconstructing unresolved variability. The model is trained with flow matching exclusively on reanalysis data and is applied to global medium-range forecasts. We evaluate (i) design consistency by re-coarsening super-resolved forecasts and comparing them to the original coarse trajectories, and (ii) high-resolution forecast quality using standard ensemble verification metrics and spectral diagnostics. Results show that super-resolution preserves large-scale structure and variance after re-coarsening, introduces physically consistent small-scale variability, and achieves competitive probabilistic forecast skill at 0.25° resolution relative to an operational ensemble baseline, while requiring only a modest additional training cost compared with end-to-end high-resolution forecasting.

Severe weather conditions such as rain and snow adversely affect the visual quality of images captured under such conditions thus rendering them useless for further usage and sharing. In addition, such degraded images drastically affect performance of vision systems. Hence, it is important to solve the problem of single image de-raining/de-snowing. However, this is a difficult problem to solve due to its inherent ill-posed nature. Existing approaches attempt to introduce prior information to convert it into a well-posed problem. In this paper, we investigate a new point of view in addressing the single image de-raining problem. Instead of focusing only on deciding what is a good prior or a good framework to achieve good quantitative and qualitative performance, we also ensure that the de-rained image itself does not degrade the performance of a given computer vision algorithm such as detection and classification. In other words, the de-rained result should be indistinguishable from its corresponding clear image to a given discriminator. This criterion can be directly incorporated into the optimization framework by using the recently introduced conditional generative adversarial networks (GANs). To minimize artifacts introduced by GANs and ensure better visual quality, a new refined loss function is introduced. Based on this, we propose a novel single image de-raining method called Image De-raining Conditional General Adversarial Network (ID-CGAN), which considers quantitative, visual and also discriminative performance into the objective function. Experiments evaluated on synthetic images and real images show that the proposed method outperforms many recent state-of-the-art single image de-raining methods in terms of quantitative and visual performance.

Accurate evaluation of weather forecasting models is critical for their reliable deployment in real-world applications. However, existing benchmarks predominantly rely on reanalysis products such as ERA5, which are generated through delayed data assimilation and do not reflect the constraints of real-time operational forecasting, thereby resulting in a systematic mismatch between benchmark performance and real-world forecasting. In this work, we introduce RealBench, a next-generation benchmark for AI weather forecasting that emphasizes realistic evaluation under operational conditions. RealBench features a strictly out-of-distribution test set spanning 2025 to eliminate data leakage and capture recent atmospheric regimes. It integrates multiple data sources, including low-latency operational analysis and a large-scale global in-situ observation dataset comprising over 10,000 stations, enabling direct evaluation against real atmospheric measurements. Beyond standard global metrics, RealBench provides a comprehensive evaluation framework for high-impact extreme events, including heatwaves, cold surges, and tropical cyclones, using event-specific metrics that better reflect real-world forecasting priorities. The evaluation results reveal substantial discrepancies between reanalysis-based metrics and real-world performance, particularly concerning extreme events. By highlighting the limitations of existing benchmarks, this work establishes a more faithful and operationally relevant evaluation paradigm, providing a rigorous foundation for advancing next-generation AI weather forecasting systems. The benchmark implementation is available at: https://github.com/lixruize-del/NWP-Benchmark.

Real-time detection and prediction of extreme weather protect human lives and infrastructure. Traditional methods rely on numerical threshold setting and manual interpretation of weather heatmaps with Geographic Information Systems (GIS), which can be slow and error-prone. Our research redefines Extreme Weather Events Detection (EWED) by framing it as a Visual Question Answering (VQA) problem, thereby introducing a more precise and automated solution. Leveraging Vision-Language Models (VLM) to simultaneously process visual and textual data, we offer an effective aid to enhance the analysis process of weather heatmaps. Our initial assessment of general-purpose VLMs (e.g., GPT-4-Vision) on EWED revealed poor performance, characterized by low accuracy and frequent hallucinations due to inadequate color differentiation and insufficient meteorological knowledge. To address these challenges, we introduce ClimateIQA, the first meteorological VQA dataset, which includes 8,760 wind gust heatmaps and 254,040 question-answer pairs covering four question types, both generated from the latest climate reanalysis data. We also propose Sparse Position and Outline Tracking (SPOT), an innovative technique that leverages OpenCV and K-Means clustering to capture and depict color contours in heatmaps, providing ClimateIQA with more accurate color spatial location information. Finally, we present Climate-Zoo, the first meteorological VLM collection, which adapts VLMs to meteorological applications using the ClimateIQA dataset. Experiment results demonstrate that models from Climate-Zoo substantially outperform state-of-the-art general VLMs, achieving an accuracy increase from 0% to over 90% in EWED verification. The datasets and models in this study are publicly available for future climate science research: https://github.com/AlexJJJChen/Climate-Zoo.

Deep neural networks offer an alternative paradigm for modeling weather conditions. The ability of neural models to make a prediction in less than a second once the data is available and to do so with very high temporal and spatial resolution, and the ability to learn directly from atmospheric observations, are just some of these models' unique advantages. Neural models trained using atmospheric observations, the highest fidelity and lowest latency data, have to date achieved good performance only up to twelve hours of lead time when compared with state-of-the-art probabilistic Numerical Weather Prediction models and only for the sole variable of precipitation. In this paper, we present MetNet-3 that extends significantly both the lead time range and the variables that an observation based neural model can predict well. MetNet-3 learns from both dense and sparse data sensors and makes predictions up to 24 hours ahead for precipitation, wind, temperature and dew point. MetNet-3 introduces a key densification technique that implicitly captures data assimilation and produces spatially dense forecasts in spite of the network training on extremely sparse targets. MetNet-3 has a high temporal and spatial resolution of, respectively, up to 2 minutes and 1 km as well as a low operational latency. We find that MetNet-3 is able to outperform the best single- and multi-member NWPs such as HRRR and ENS over the CONUS region for up to 24 hours ahead setting a new performance milestone for observation based neural models. MetNet-3 is operational and its forecasts are served in Google Search in conjunction with other models.

Earth system models suffer from various structural and parametric errors in their representation of nonlinear, multi-scale processes, leading to uncertainties in their long-term projections. The effects of many of these errors (particularly those due to fast physics) can be quantified in short-term simulations, e.g., as differences between the predicted and observed states (analysis increments). With the increase in the availability of high-quality observations and simulations, learning nudging from these increments to correct model errors has become an active research area. However, most studies focus on using neural networks, which while powerful, are hard to interpret, are data-hungry, and poorly generalize out-of-distribution. Here, we show the capabilities of Model Error Discovery with Interpretability and Data Assimilation (MEDIDA), a general, data-efficient framework that uses sparsity-promoting equation-discovery techniques to learn model errors from analysis increments. Using two-layer quasi-geostrophic turbulence as the test case, MEDIDA is shown to successfully discover various linear and nonlinear structural/parametric errors when full observations are available. Discovery from spatially sparse observations is found to require highly accurate interpolation schemes. While NNs have shown success as interpolators in recent studies, here, they are found inadequate due to their inability to accurately represent small scales, a phenomenon known as spectral bias. We show that a general remedy, adding a random Fourier feature layer to the NN, resolves this issue enabling MEDIDA to successfully discover model errors from sparse observations. These promising results suggest that with further development, MEDIDA could be scaled up to models of the Earth system and real observations.

In recent years, AI-based weather forecasting models have matched or even outperformed numerical weather prediction systems. However, most of these models have been trained and evaluated on reanalysis datasets like ERA5. These datasets, being products of numerical models, often diverge substantially from actual observations in some crucial variables like near-surface temperature, wind, precipitation and clouds - parameters that hold significant public interest. To address this divergence, we introduce WeatherReal, a novel benchmark dataset for weather forecasting, derived from global near-surface in-situ observations. WeatherReal also features a publicly accessible quality control and evaluation framework. This paper details the sources and processing methodologies underlying the dataset, and further illustrates the advantage of in-situ observations in capturing hyper-local and extreme weather through comparative analyses and case studies. Using WeatherReal, we evaluated several data-driven models and compared them with leading numerical models. Our work aims to advance the AI-based weather forecasting research towards a more application-focused and operation-ready approach.

Operational weather prediction at kilometer scales remains computationally prohibitive for traditional numerical weather prediction (NWP) models, limiting forecast access for applications in energy, agriculture, and disaster management that require fine-grained spatiotemporal detail. Here we introduce AirCast-SR, a foundation model for atmospheric super-resolution that downscales global AI weather forecasts from 0.25 degree (~28 km) to 1 km horizontal resolution at hourly temporal resolution, producing 67-hour forecasts of eight coupled surface variables simultaneously. EarthMind-SR employs a three-dimensional U-Net conditioned within a Latent Consistency Model (LCM) diffusion framework, trained on patch-based samples over the contiguous United States (CONUS) using GraphCast forecasts as input and NOAA's Analysis of Record for Calibration (AORC) as the target. The model achieves near-zero bias across all variables and lead times, and its radial power spectral density analysis demonstrates preservation of fine-scale atmospheric structure at wavelengths of 10 km to 100 km where coarser models lose spectral power. We validate EarthMind-SR across three CONUS case studies spanning winter, summer, and spring seasons, and demonstrate zero-shot global transferability over India and Germany using independent surface station observations without any retraining or fine-tuning. As an open-weights foundation model, EarthMind-SR establishes a new paradigm for kilometer-scale AI weather prediction and provides a platform for regional fine-tuning, distillation, and downstream applications in climate services and hazard forecasting.

Triggered by the realization that AI emulators can rival the performance of traditional numerical weather prediction models running on HPC systems, there is now an increasing number of large AI models that address use cases such as forecasting, downscaling, or nowcasting. While the parallel developments in the AI literature focus on foundation models -- models that can be effectively tuned to address multiple, different use cases -- the developments on the weather and climate side largely focus on single-use cases with particular emphasis on mid-range forecasting. We close this gap by introducing Prithvi WxC, a 2.3 billion parameter foundation model developed using 160 variables from the Modern-Era Retrospective Analysis for Research and Applications, Version 2 (MERRA-2). Prithvi WxC employs an encoder-decoder-based architecture, incorporating concepts from various recent transformer models to effectively capture both regional and global dependencies in the input data. The model has been designed to accommodate large token counts to model weather phenomena in different topologies at fine resolutions. Furthermore, it is trained with a mixed objective that combines the paradigms of masked reconstruction with forecasting. We test the model on a set of challenging downstream tasks namely: Autoregressive rollout forecasting, Downscaling, Gravity wave flux parameterization, and Extreme events estimation. The pretrained model with 2.3 billion parameters, along with the associated fine-tuning workflows, has been publicly released as an open-source contribution via Hugging Face.

Data assimilation (DA), as an indispensable component within contemporary Numerical Weather Prediction (NWP) systems, plays a crucial role in generating the analysis that significantly impacts forecast performance. Nevertheless, the development of an efficient DA system poses significant challenges, particularly in establishing intricate relationships between the background data and the vast amount of multi-source observation data within limited time windows in operational settings. To address these challenges, researchers design complex pre-processing methods for each observation type, leveraging approximate modeling and the power of super-computing clusters to expedite solutions. The emergence of deep learning (DL) models has been a game-changer, offering unified multi-modal modeling, enhanced nonlinear representation capabilities, and superior parallelization. These advantages have spurred efforts to integrate DL models into various domains of weather modeling. Remarkably, DL models have shown promise in matching, even surpassing, the forecast accuracy of leading operational NWP models worldwide. This success motivates the exploration of DL-based DA frameworks tailored for weather forecasting models. In this study, we introduces FuxiDA, a generalized DL-based DA framework for assimilating satellite observations. By assimilating data from Advanced Geosynchronous Radiation Imager (AGRI) aboard Fengyun-4B, FuXi-DA consistently mitigates analysis errors and significantly improves forecast performance. Furthermore, through a series of single-observation experiments, Fuxi-DA has been validated against established atmospheric physics, demonstrating its consistency and reliability.

State-of-the-art AI weather models have shown impressive medium-range forecast skill and computational efficiency, but suffer two key shortcomings: their forecasts have lower spatial and temporal resolution than the best physics-based models and they are exclusively initialized with and trained on analysis data. As a result, they cannot directly make use of observations, and any biases in the analysis are inherited by the forecast. WeatherNext 3 addresses these shortcomings and establishes a new state-of-the-art for probabilistic medium-range forecasting skill. First, WeatherNext 3 generates new forecasts every hour (rather than every 6 hours like traditional global models) by ingesting low-latency geostationary satellite data. Second, WeatherNext 3's temporal and spatial resolution are on par with physics-based global models, with hourly time steps and 0.1 degree resolution for single-level variables, including solar radiation and cloud cover. Third, WeatherNext 3 moves beyond traditional analysis variables by learning to predict satellite-derived precipitation estimates, as well as tropical cyclone and station observations. Modelling sparse station data allows WeatherNext 3 to make 2m temperature and dewpoint predictions at any location and time, conditioned on local geographical features, with substantially lower error than competing global models, even when evaluated against unseen stations. Together, WeatherNext 3's capabilities move operational AI-based weather forecasting beyond emulating the traditionally distinct stages of data assimilation, forecasting and post-processing, which helps to further push the frontier of performance and granularity for global weather prediction.

In this study, a novel machine learning approach was used to classify three types of synoptic weather events in Taiwan area from 2001 to 2010. We used reanalysis data with three machine learning algorithms to recognize weather systems and evaluated their performance. Overall, the classifiers successfully identified 52-83% of weather events (hit rate), which is higher than the performance of traditional objective methods. The results showed that the machine learning approach gave low false alarm rate in general, while the support vector machine (SVM) with more principal components of reanalysis data had higher hit rate on all tested weather events. The sensitivity tests of grid data resolution indicated that the differences between the high- and low-resolution datasets are limited, which implied that the proposed method can achieve reasonable performance in weather forecasting with minimal resources. By identifying daily weather systems in historical reanalysis data, this method can be used to study long-term weather changes, to monitor climatological-scale variations, and to provide a better estimate of climate projections. Furthermore, this method can also serve as an alternative to model output statistics and potentially be used for synoptic weather forecasting.

The High-Resolution Rapid Refresh (HRRR) model is a convection-allowing model used in operational weather forecasting across the contiguous United States (CONUS). To provide a computationally efficient alternative, we introduce HRRRCast, a data-driven emulator built with advanced machine learning techniques. HRRRCast includes two architectures: a ResNet-based model (ResHRRR) and a Graph Neural Network-based model (GraphHRRR). ResHRRR uses convolutional neural networks enhanced with squeeze-and-excitation blocks and Feature-wise Linear Modulation, and supports probabilistic forecasting via the Denoising Diffusion Implicit Model (DDIM). To better handle longer lead times, we train a single model to predict multiple lead times (1h, 3h, and 6h), then use a greedy rollout strategy during inference. When evaluated on composite reflectivity over the full CONUS domain using ensembles of 3 to 10 members, ResHRRR outperforms HRRR forecast at light rainfall threshold (20 dBZ) and achieves competitive performance at moderate thresholds (30 dBZ). Our work advances the StormCast model of Pathak et al. [21] by: a) training on the full CONUS domain, b) using multiple lead times to improve long-range skill, c) training on analysis data instead of the +1h post-analysis data inadvertently used in StormCast, and d) incorporating future GFS states as inputs, enabling downscaling that improves long-lead accuracy. Grid-, neighborhood-, and object-based metrics confirm better storm placement, lower frequency bias, and higher success ratios than HRRR. HRRRCast ensemble forecasts also maintain sharper spatial detail, with power spectra more closely matching HRRR analysis. While GraphHRRR underperforms in its current form, it lays groundwork for future graph-based forecasting. HRRRCast represents a step toward efficient, data-driven regional weather prediction with competitive accuracy and ensemble capability.

AI weather models now rival leading numerical weather prediction (NWP) systems in medium-range skill. However, almost all still rely on NWP data assimilation (DA) to provide initial conditions, tying them to expensive infrastructure and limiting the practical speed and accuracy gains of ML. More recently, ML-based DA systems have been proposed, which are often trained and evaluated end-to-end with a forecast model, making it difficult to assess the quality of their analysis fields. We introduce HealDA, a global ML-based DA system that maps a short window of satellite and conventional observations directly to a 1° atmospheric state on the HEALPix grid, using a smaller sensor suite than operational NWP and no background forecast at runtime. We treat HealDA strictly as a DA module: its analyses are used to initialize off-the-shelf ML forecast models without any fine-tuning of either. For a variety of off-the-shelf ML forecast models, including FourCastNet3 (FCN3), Aurora, and FengWu, HealDA-initialized forecasts lose less than one day of effective lead time when scored against ERA5. HealDA-initialized FCN3 ensembles similarly trail those of the ECMWF IFS ENS system by < 24 h. We find that forecast error growth in these models i unchanged from HealDA initialization, and the skill gap primarily arises from the larger initial error of the HealDA analysis. Spectral analysis reveals that this stems from overfitting to the large scales and upper-tropospheric fields. We also demonstrate that small changes in the verification setup can shift apparent skill by 12--24h, underscoring the need for consistent scoring. Taken together, these results clarify the current performance of ML-based DA systems and show that a relatively simple, background-free network can already provide initial conditions that are usable by state-of-the-art ML forecast models with only modest loss in medium-range skill.

Accurate probabilistic weather forecasting demands both high accuracy and efficient uncertainty quantification, challenges that overburden both ensemble numerical weather prediction (NWP) and recent machine-learning methods. We introduce LaDCast, the first global latent-diffusion framework for medium-range ensemble forecasting, which generates hourly ensemble forecasts entirely in a learned latent space. An autoencoder compresses high-dimensional ERA5 reanalysis fields into a compact representation, and a transformer-based diffusion model produces sequential latent updates with arbitrary hour initialization. The model incorporates Geometric Rotary Position Embedding (GeoRoPE) to account for the Earth's spherical geometry, a dual-stream attention mechanism for efficient conditioning, and sinusoidal temporal embeddings to capture seasonal patterns. LaDCast achieves deterministic and probabilistic skill close to that of the European Centre for Medium-Range Forecast IFS-ENS, without any explicit perturbations. Notably, LaDCast demonstrates superior performance in tracking rare extreme events such as cyclones, capturing their trajectories more accurately than established models. By operating in latent space, LaDCast reduces storage and compute by orders of magnitude, demonstrating a practical path toward forecasting at kilometer-scale resolution in real time. We open-source our code and models and provide the training and evaluation pipelines at: https://github.com/tonyzyl/ladcast.

Real-time streamflow monitoring networks generate millions of observations annually, yet maintaining data quality across thousands of remote sensors remains labor-intensive. We introduce HydroGEM (Hydrological Generalizable Encoder for Monitoring), a foundation model for continental-scale streamflow quality control. HydroGEM uses two-stage training: self-supervised pretraining on 6.03 million sequences from 3,724 USGS stations learns hydrological representations, followed by fine-tuning with synthetic anomalies for detection and reconstruction. A hybrid TCN-Transformer architecture (14.2M parameters) captures local temporal patterns and long-range dependencies, while hierarchical normalization handles six orders of magnitude in discharge. On held-out synthetic tests comprising 799 stations with 18 expert-validated anomaly types, HydroGEM achieves F1 = 0.792 for detection and 68.7% reconstruction-error reduction, a 36.3% improvement over existing methods. Zero-shot transfer to 100 Environment and Climate Change Canada stations yields F1 = 0.586, exceeding all baselines and demonstrating cross-national generalization. The model maintains consistent detection across correction magnitudes and aligns with operational seasonal patterns. HydroGEM is designed for human-in-the-loop workflows - outputs are quality control suggestions requiring expert review, not autonomous corrections.

Data-driven modeling based on machine learning (ML) is showing enormous potential for weather forecasting. Rapid progress has been made with impressive results for some applications. The uptake of ML methods could be a game-changer for the incremental progress in traditional numerical weather prediction (NWP) known as the 'quiet revolution' of weather forecasting. The computational cost of running a forecast with standard NWP systems greatly hinders the improvements that can be made from increasing model resolution and ensemble sizes. An emerging new generation of ML models, developed using high-quality reanalysis datasets like ERA5 for training, allow forecasts that require much lower computational costs and that are highly-competitive in terms of accuracy. Here, we compare for the first time ML-generated forecasts with standard NWP-based forecasts in an operational-like context, initialized from the same initial conditions. Focusing on deterministic forecasts, we apply common forecast verification tools to assess to what extent a data-driven forecast produced with one of the recently developed ML models (PanguWeather) matches the quality and attributes of a forecast from one of the leading global NWP systems (the ECMWF IFS). The results are very promising, with comparable skill for both global metrics and extreme events, when verified against both the operational analysis and synoptic observations. Increasing forecast smoothness and bias drift with forecast lead time are identified as current drawbacks of ML-based forecasts. A new NWP paradigm is emerging relying on inference from ML models and state-of-the-art analysis and reanalysis datasets for forecast initialization and model training.

The availability of reliable, high-resolution climate and weather data is important to inform long-term decisions on climate adaptation and mitigation and to guide rapid responses to extreme events. Forecasting models are limited by computational costs and, therefore, often generate coarse-resolution predictions. Statistical downscaling, including super-resolution methods from deep learning, can provide an efficient method of upsampling low-resolution data. However, despite achieving visually compelling results in some cases, such models frequently violate conservation laws when predicting physical variables. In order to conserve physical quantities, here we introduce methods that guarantee statistical constraints are satisfied by a deep learning downscaling model, while also improving their performance according to traditional metrics. We compare different constraining approaches and demonstrate their applicability across different neural architectures as well as a variety of climate and weather data sets. Besides enabling faster and more accurate climate predictions through downscaling, we also show that our novel methodologies can improve super-resolution for satellite data and natural images data sets.

Skillful subseasonal forecasts are crucial for various sectors of society but pose a grand scientific challenge. Recently, machine learning based weather forecasting models outperform the most successful numerical weather predictions generated by the European Centre for Medium-Range Weather Forecasts (ECMWF), but have not yet surpassed conventional models at subseasonal timescales. This paper introduces FuXi Subseasonal-to-Seasonal (FuXi-S2S), a machine learning model that provides global daily mean forecasts up to 42 days, encompassing five upper-air atmospheric variables at 13 pressure levels and 11 surface variables. FuXi-S2S, trained on 72 years of daily statistics from ECMWF ERA5 reanalysis data, outperforms the ECMWF's state-of-the-art Subseasonal-to-Seasonal model in ensemble mean and ensemble forecasts for total precipitation and outgoing longwave radiation, notably enhancing global precipitation forecast. The improved performance of FuXi-S2S can be primarily attributed to its superior capability to capture forecast uncertainty and accurately predict the Madden-Julian Oscillation (MJO), extending the skillful MJO prediction from 30 days to 36 days. Moreover, FuXi-S2S not only captures realistic teleconnections associated with the MJO, but also emerges as a valuable tool for discovering precursor signals, offering researchers insights and potentially establishing a new paradigm in Earth system science research.

Short-term forecasting of vegetation dynamics is a key enabler for data-driven decision support in precision agriculture. Normalized Difference Vegetation Index (NDVI) forecasting from satellite observations, however, remains challenging due to sparse and irregular sampling caused by cloud masking, as well as the heterogeneous climatic conditions under which crops evolve. In this work, we propose a probabilistic forecasting framework for field-level NDVI prediction under sparse, irregular clear-sky acquisitions. The architecture separates the encoding of historical NDVI and meteorological observations from future exogenous covariates, fusing both representations for multi-step quantile prediction. To address irregular revisit patterns and horizon-dependent uncertainty, we introduce a temporal-distance weighted quantile loss that aligns the training objective with the effective forecasting horizon. In addition, we incorporate cumulative and extreme-weather feature engineering to capture delayed meteorological effects relevant to vegetation response. Experiments on European satellite data show that the proposed approach outperforms statistical, deep learning, and time-series baselines on both pointwise and probabilistic evaluation metrics. Ablation studies confirm that target history is the primary driver of performance, with meteorological covariates providing additional gains in the full multimodal setting. The code is available at https://github.com/arco-group/ndvi-forecasting.

The interaction between the Earths surface and the atmosphere plays a key role in the initiation of cumulus convection. Over the land surface, a necessary boundary condition to consider for resolving land-atmosphere interactions is soil moisture. The aim in the study is twofold. One, through object oriented and traditional verification techniques determine how higher resolution soil moisture initial conditions influences the prediction of the location and timing of convective initiation (CI) within a convective permitting, operational NWP model over South Africa. Two, to study the modelled CI-soil moisture relationship during real afternoon thunderstorm events. The study reports the results from 66 Unified Model simulations (at 4.4km grid resolution) for nine summer afternoon CI events during synoptically benign conditions over South Africa. The higher resolution soil moisture conditions reduce centroid distance between observed and forecast storms on average by 7km (9 percent improvement), with the most decrease in centroid distance occurring at the shortest lead times, by 12km. Most improvement in location error occurs in the zonal directional. However, little to no difference is found in the timing of CI, most likely attributable to the dominant effect of model grid size on CI timing, overshadowing the influence from soil moisture anomalies. Probability of CI is highest over dry and moderate soils and areas along distinct soil moisture gradients. The conclusion is that modelled CI over South Africa preferentially occurs on the periphery of wet soil moisture patches, where there is increased surface convergence of wind and higher sensible heat flux.

Machine learning (ML)-based weather models have rapidly risen to prominence due to their greater accuracy and speed than traditional forecasts based on numerical weather prediction (NWP), recently outperforming traditional ensembles in global probabilistic weather forecasting. This paper presents FGN, a simple, scalable and flexible modeling approach which significantly outperforms the current state-of-the-art models. FGN generates ensembles via learned model-perturbations with an ensemble of appropriately constrained models. It is trained directly to minimize the continuous rank probability score (CRPS) of per-location forecasts. It produces state-of-the-art ensemble forecasts as measured by a range of deterministic and probabilistic metrics, makes skillful ensemble tropical cyclone track predictions, and captures joint spatial structure despite being trained only on marginals.

Deep generative networks have recently achieved unprecedented performance in precise image and video editing using sophisticated textual prompts. However, the effectiveness of such models heavily depends on access to very large supervised and annotated image datasets, which can be very difficult to obtain. This is particularly true for satellite instruments, which very rarely overlap with labelled data, and suffer from domain shifts in the rare occasions they do. In this paper, we investigate the potential of flow matching models for unsupervised domain adaptation of satellite radiometer images. Our main contribution is a novel unsupervised method that achieves precise domain alignment by leveraging parts of the deterministic ordinary differential equations in flow matching models, conditioned on different satellite instruments. A key strength of our approach is its ability to preserve essential information while adapting across any domains since the perturbations are in theory bijective. Extensive experiments conducted on the GPM-Core constellation show the benefit of our conditional domain adaptation, particularly in improving rain precipitation estimation from radiometer imagery.

We present the GAIA (Geospatial Artificial Intelligence for Atmospheres) Foundation Model, a novel model that combines masked autoencoders (MAE) and self-DIstillation with NO labels (DINO) for analyzing global atmospheric patterns in satellite imagery. By integrating these complementary self-supervised learning approaches, our model simultaneously captures both local features and global dependencies. We address two critical challenges in satellite data analysis: reconstructing missing regions and estimating precipitation patterns as our first downstream tasks. The model demonstrates superior temporal pattern capture compared to standard MAE approaches, while maintaining robust performance in downstream tasks. Our experimental results show strong gap-filling capabilities across varying mask ratios and accurate precipitation estimation with limited training data, achieving a false alarm ratio of 0.088 and structural similarity of 0.881. This work represents an advancement in self-supervised learning for atmospheric science, providing a foundation for improved weather monitoring and climate analysis. The trained model weights and accompanying code are publicly available as open-source on Hugging Face here: https://huggingface.co/bcg-usra-nasa-gaia/GAIA-v1.

The weather forecasting system is important for science and society, and significant achievements have been made in applying artificial intelligence (AI) to medium-range weather forecasting. However, existing AI-based weather forecasting models rely on analysis or reanalysis products from traditional numerical weather prediction (NWP) systems as initial conditions for making predictions. Initial states are typically generated by traditional data assimilation components, which are computational expensive and time-consuming. Here we present an AI-based data assimilation model, i.e., Adas, for global weather variables. By introducing the confidence matrix, Adas employs gated convolution to handle sparse observations and gated cross-attention for capturing the interactions between the background and observations. Further, we combine Adas with the advanced AI-based forecasting model (i.e., FengWu) to construct the first end-to-end AI-based global weather forecasting system: FengWu-Adas. We demonstrate that Adas can assimilate global observations to produce high-quality analysis, enabling the system operate stably for long term. Moreover, we are the first to apply the methods to real-world scenarios, which is more challenging and has considerable practical application potential. We have also achieved the forecasts based on the analyses generated by AI with a skillful forecast lead time exceeding that of the IFS for the first time.

Climate and weather prediction traditionally relies on complex numerical simulations of atmospheric physics. Deep learning approaches, such as transformers, have recently challenged the simulation paradigm with complex network forecasts. However, they often act as data-driven black-box models that neglect the underlying physics and lack uncertainty quantification. We address these limitations with ClimODE, a spatiotemporal continuous-time process that implements a key principle of advection from statistical mechanics, namely, weather changes due to a spatial movement of quantities over time. ClimODE models precise weather evolution with value-conserving dynamics, learning global weather transport as a neural flow, which also enables estimating the uncertainty in predictions. Our approach outperforms existing data-driven methods in global and regional forecasting with an order of magnitude smaller parameterization, establishing a new state of the art.

Artificial Intelligence (AI) weather models are improving rapidly, and their forecasts are already competitive with long-established traditional Numerical Weather Prediction (NWP). To build confidence in this new methodology, it is critical that we understand how these predictions are generated. This is a huge challenge as these AI weather models remain largely black boxes. In other areas of Machine Learning (ML), mechanistic interpretability has emerged as a framework for understanding ML predictions by analysing the building blocks responsible for them. Here we present an open-source, highly adaptable tool which incorporates concepts from mechanistic interpretability. The tool organises internal latent representations from the model processor and allows for initial analyses, including cosine similarity and Principal Component Analysis (PCA), enabling the user to identify directions in latent space potentially associated with meteorological features. Applying our tool to the graph neural network GraphCast, we present preliminary case studies for mid-latitude synoptic-scale waves and specific humidity. These demonstrate the tool's ability to identify linear combinations of latent channels that appear to correspond to interpretable features.

Weather nowcasting is an essential task that involves predicting future radar echo sequences based on current observations, offering significant benefits for disaster management, transportation, and urban planning. Current prediction methods are limited by training and storage efficiency, mainly focusing on 2D spatial predictions at specific altitudes. Meanwhile, 3D volumetric predictions at each timestamp remain largely unexplored. To address such a challenge, we introduce a comprehensive framework for 3D radar sequence prediction in weather nowcasting, using the newly proposed SpatioTemporal Coherent Gaussian Splatting (STC-GS) for dynamic radar representation and GauMamba for efficient and accurate forecasting. Specifically, rather than relying on a 4D Gaussian for dynamic scene reconstruction, STC-GS optimizes 3D scenes at each frame by employing a group of Gaussians while effectively capturing their movements across consecutive frames. It ensures consistent tracking of each Gaussian over time, making it particularly effective for prediction tasks. With the temporally correlated Gaussian groups established, we utilize them to train GauMamba, which integrates a memory mechanism into the Mamba framework. This allows the model to learn the temporal evolution of Gaussian groups while efficiently handling a large volume of Gaussian tokens. As a result, it achieves both efficiency and accuracy in forecasting a wide range of dynamic meteorological radar signals. The experimental results demonstrate that our STC-GS can efficiently represent 3D radar sequences with over 16times higher spatial resolution compared with the existing 3D representation methods, while GauMamba outperforms state-of-the-art methods in forecasting a broad spectrum of high-dynamic weather conditions.

Weather forecasting is fundamentally challenged by the chaotic nature of the atmosphere, necessitating probabilistic approaches to quantify uncertainty. While traditional ensemble prediction (EPS) addresses this through computationally intensive simulations, recent advances in Bayesian Deep Learning (BDL) offer a promising but often disconnected alternative. We bridge these paradigms through a unified hybrid Bayesian Deep Learning framework for ensemble weather forecasting that explicitly decomposes predictive uncertainty into epistemic and aleatoric components, learned via variational inference and a physics-informed stochastic perturbation scheme modeling flow-dependent atmospheric dynamics, respectively. We further establish a unified theoretical framework that rigorously connects BDL and EPS, providing formal theorems that decompose total predictive uncertainty into epistemic and aleatoric components under the hybrid BDL framework. We validate our framework on the large-scale 40-year ERA5 reanalysis dataset (1979-2019) with 0.25° spatial resolution. Experimental results show that our method not only improves forecast accuracy and yields better-calibrated uncertainty quantification but also achieves superior computational efficiency compared to state-of-the-art probabilistic diffusion models. We commit to making our code open-source upon acceptance of this paper.

Recent advancements in artificial intelligence (AI) for numerical weather prediction (NWP) have significantly transformed atmospheric modeling. AI NWP models outperform traditional physics-based systems, such as the Integrated Forecast System (IFS), across several global metrics while requiring fewer computational resources. However, existing AI NWP models face limitations related to training datasets and timestep choices, often resulting in artifacts that reduce model performance. To address these challenges, we introduce the Community Research Earth Digital Intelligence Twin (CREDIT) framework, developed at NSF NCAR. CREDIT provides a flexible, scalable, and user-friendly platform for training and deploying AI-based atmospheric models on high-performance computing systems. It offers an end-to-end pipeline for data preprocessing, model training, and evaluation, democratizing access to advanced AI NWP capabilities. We demonstrate CREDIT's potential through WXFormer, a novel deterministic vision transformer designed to predict atmospheric states autoregressively, addressing common AI NWP issues like compounding error growth with techniques such as spectral normalization, padding, and multi-step training. Additionally, to illustrate CREDIT's flexibility and state-of-the-art model comparisons, we train the FUXI architecture within this framework. Our findings show that both FUXI and WXFormer, trained on six-hourly ERA5 hybrid sigma-pressure levels, generally outperform IFS HRES in 10-day forecasts, offering potential improvements in efficiency and forecast accuracy. CREDIT's modular design enables researchers to explore various models, datasets, and training configurations, fostering innovation within the scientific community.

Machine-learning (ML) models, such as the AIFS at the ECMWF, have revolutionised weather forecasting in recent years. We present an extension of the AIFS that jointly models the atmosphere and surface ocean, including ocean waves and sea ice. The primary objective of this extension is to enhance machine-learning medium-range forecasting and enable new use cases by expanding the weather state to better capture coupled surface processes. Our approach departs from traditional numerical models by not having two separate models for the atmosphere and marine components. The joint model instead learns correlations across the entire atmosphere-ocean interface in a component-agnostic way, and can exploit the expressive capacity of ML architectures to learn cross-component relationships directly from the data. We leverage tailored and targeted datasets and solve model design challenges such as missing values over land, multi-scale temporal dynamics, and physical realism of forecast fields and demonstrate the utility of loss scaling in guiding the learning process. We evaluate how representing the surface ocean affects medium-range weather forecasts. We also assess the model's ability to predict surface-ocean fields, including wave swell and tropical-cyclone cold wakes. For nearly all evaluated marine variables, we observe an improvement of approximately one day in forecast skill at medium-range lead times compared to physics-based models. Furthermore, we demonstrate that the model is robust to idealised initial conditions outside the training distribution and responds to them in a physically consistent way. Overall, our findings suggest that the joint AIFS modelling approach offers significant potential for combined atmosphere-ocean forecasting. Our work provides a solid foundation for future development of data-driven coupled Earth system models with greater flexibility and physical fidelity.

Predictive Coding (PC) is a theoretical framework in cognitive science suggesting that the human brain processes cognition through spatiotemporal prediction of the visual world. Existing studies have developed spatiotemporal prediction neural networks based on the PC theory, emulating its two core mechanisms: Correcting predictions from residuals and hierarchical learning. However, these models do not show the enhancement of prediction skills on real-world forecasting tasks and ignore the Precision Weighting mechanism of PC theory. The precision weighting mechanism posits that the brain allocates more attention to signals with lower precision, contributing to the cognitive ability of human brains. This work introduces the Cognitive Diffusion Probabilistic Models (CogDPM), which demonstrate the connection between diffusion probabilistic models and PC theory. CogDPM features a precision estimation method based on the hierarchical sampling capabilities of diffusion models and weight the guidance with precision weights estimated by the inherent property of diffusion models. We experimentally show that the precision weights effectively estimate the data predictability. We apply CogDPM to real-world prediction tasks using the United Kindom precipitation and ERA surface wind datasets. Our results demonstrate that CogDPM outperforms both existing domain-specific operational models and general deep prediction models by providing more proficient forecasting.

The Copernicus Regional Reanalysis for Europe, CERRA, is a high-resolution regional reanalysis dataset for the European domain. In recent years it has shown significant utility across various climate-related tasks, ranging from forecasting and climate change research to renewable energy prediction, resource management, air quality risk assessment, and the forecasting of rare events, among others. Unfortunately, the availability of CERRA is lagging two years behind the current date, due to constraints in acquiring the requisite external data and the intensive computational demands inherent in its generation. As a solution, this paper introduces a novel method using diffusion models to approximate CERRA downscaling in a data-driven manner, without additional informations. By leveraging the lower resolution ERA5 dataset, which provides boundary conditions for CERRA, we approach this as a super-resolution task. Focusing on wind speed around Italy, our model, trained on existing CERRA data, shows promising results, closely mirroring original CERRA data. Validation with in-situ observations further confirms the model's accuracy in approximating ground measurements.

We introduce Mosaic, a probabilistic weather forecasting model that addresses two distinct failure modes of spectral degradation in ML-based weather prediction: (1) spectral damping caused by deterministic training against ensemble means; and (2) aliasing artifacts caused by compressive encoding onto a coarse latent grid. Mosaic generates ensemble members through learned functional perturbations and operates on native-resolution grids via mesh-aligned block-sparse attention, a hardware-aligned mechanism that captures long-range dependencies at linear cost by sharing keys and values across spatially adjacent queries. At 1.5° resolution with 214M parameters, Mosaic matches or outperforms models trained on 6times finer resolution on key variables and achieves state-of-the-art results among 1.5° models, producing well-calibrated ensembles whose individual members exhibit near-perfect spectral alignment across all resolved frequencies. A 24-member, 10-day forecast takes under 12\,s on a single H100~GPU. Code is available at https://github.com/maxxxzdn/mosaic.

This work develops a theoretical model for steady thermodynamic and kinematic profiles for severe convective storm environments, building off of the two-layer static energy framework developed in Agard and Emanuel (2017). The model is phrased in terms of static energy, and it allows for independent variation of the boundary layer and free troposphere separated by a capping inversion. An algorithm is presented to apply the model to generate a sounding for numerical simulations of severe convective storms, and the model is compared and contrasted with that of Weisman and Klemp. The model is then fit to a case-study sounding associated with the 3 May 1999 tornado outbreak, and its potential utility is demonstrated via idealized numerical simulation experiments. A long-lived supercell is successfully simulated with the historical sounding but not the analogous theoretical sounding. Two types of example experiments are then performed that do simulate a long-lived supercell: 1) a semi-theoretical experiment in which a portion of the theoretical sounding is modified to match the real sounding (low-level moisture); 2) a fully-theoretical experiment in which a model physical parameter is modified (free-tropospheric relative humidity). Overall, the construction of this minimal model is flexible and amenable to additional modifications as needed. The model offers a novel framework that may be useful for testing how severe convective storms depend on the vertical structure of the hydrostatic environment, as well as for linking variability in these environments to the physical processes that produce them within the climate system.

Weather forecasting is one of the cornerstones of meteorological work. In this paper, we present a new benchmark dataset named Weather2K, which aims to make up for the deficiencies of existing weather forecasting datasets in terms of real-time, reliability, and diversity, as well as the key bottleneck of data quality. To be specific, our Weather2K is featured from the following aspects: 1) Reliable and real-time data. The data is hourly collected from 2,130 ground weather stations covering an area of 6 million square kilometers. 2) Multivariate meteorological variables. 20 meteorological factors and 3 constants for position information are provided with a length of 40,896 time steps. 3) Applicable to diverse tasks. We conduct a set of baseline tests on time series forecasting and spatio-temporal forecasting. To the best of our knowledge, our Weather2K is the first attempt to tackle weather forecasting task by taking full advantage of the strengths of observation data from ground weather stations. Based on Weather2K, we further propose Meteorological Factors based Multi-Graph Convolution Network (MFMGCN), which can effectively construct the intrinsic correlation among geographic locations based on meteorological factors. Sufficient experiments show that MFMGCN improves both the forecasting performance and temporal robustness. We hope our Weather2K can significantly motivate researchers to develop efficient and accurate algorithms to advance the task of weather forecasting. The dataset can be available at https://github.com/bycnfz/weather2k/.

Large data-driven physics models like DeepMind's weather model GraphCast have empirically succeeded in parameterizing time operators for complex dynamical systems with an accuracy reaching or in some cases exceeding that of traditional physics-based solvers. Unfortunately, how these data-driven models perform computations is largely unknown and whether their internal representations are interpretable or physically consistent is an open question. Here, we adapt tools from interpretability research in Large Language Models to analyze intermediate computational layers in GraphCast, leveraging sparse autoencoders to discover interpretable features in the neuron space of the model. We uncover distinct features on a wide range of length and time scales that correspond to tropical cyclones, atmospheric rivers, diurnal and seasonal behavior, large-scale precipitation patterns, specific geographical coding, and sea-ice extent, among others. We further demonstrate how the precise abstraction of these features can be probed via interventions on the prediction steps of the model. As a case study, we sparsely modify a feature corresponding to tropical cyclones in GraphCast and observe interpretable and physically consistent modifications to evolving hurricanes. Such methods offer a window into the black-box behavior of data-driven physics models and are a step towards realizing their potential as trustworthy predictors and scientifically valuable tools for discovery.

Global climate models parameterize a range of atmospheric-oceanic processes like gravity waves, clouds, moist convection, and turbulence that cannot be sufficiently resolved. These subgrid-scale closures for unresolved processes are a leading source of model uncertainty. Here, we present a new approach to developing machine learning parameterizations of small-scale climate processes by fine-tuning a pre-trained AI foundation model (FM). FMs are largely unexplored in climate research. A pre-trained encoder-decoder from a 2.3 billion parameter FM (NASA and IBM Research's Prithvi WxC) -- which contains a latent probabilistic representation of atmospheric evolution -- is fine-tuned (or reused) to create a deep learning parameterization for atmospheric gravity waves (GWs). The parameterization captures GW effects for a coarse-resolution climate model by learning the fluxes from an atmospheric reanalysis with 10 times finer resolution. A comparison of monthly averages and instantaneous evolution with a machine learning model baseline (an Attention U-Net) reveals superior predictive performance of the FM parameterization throughout the atmosphere, even in regions excluded from pre-training. This performance boost is quantified using the Hellinger distance, which is 0.11 for the baseline and 0.06 for the fine-tuned model. Our findings emphasize the versatility and reusability of FMs, which could be used to accomplish a range of atmosphere- and climate-related applications, leading the way for the creation of observations-driven and physically accurate parameterizations for more earth-system processes.

Machine learning weather prediction (MLWP) models have achieved impressive forecasting performance at a small fraction of the computational costs required for traditional physics-based methods. However, they are primarily (1) data-driven and (2) evaluated using pixel-wide error metrics (e.g., RMSE), so there are no guarantees that their forecasts are consistent with known physical laws. We introduce PhysMetrics.Weather, an evaluation framework that assesses the physical realism of MLWP models across three types of metrics: conservation, spectral, and dynamical. By quantifying physical realism, this tool guides the development of physics-informed architectures and helps evaluate whether MLWP models are reliable for operational use. Our framework is available on Github at https://github.com/Emmakast/PhysMetrics.Weather.

Foundation models (FMs) for the Earth system learn statistical relationships between physical variables across massive datasets to enable versatile downstream applications through finetuning, separating them from task-specific weather models. Here, we introduce Earth System Foundation Model (ESFM), a fully open model building on the 3D Swin UNet backbone of the pioneering Aurora model. ESFM introduces extensions that increase functionality and foster adoption in climate sciences. First, the encoding scheme and training protocols have been extended to handle diverse datasets, including those containing missing values across all spatio-temporal dimensions such as satellite data, as well as station data, all under one backbone. Axial attention is introduced to capture inter-variable dependencies. As a result ESFM skillfully predicts variables in regions or on pressure levels where no data is present at the initial time, while preserving inter-variable relationships, for example between temperature, pressure, and humidity. Individual variable tokenization enables different sets of variables to be shuffled during training and simplifies the process of building extensions for new downstream tasks. Adaptive layer norm-based ensembles allow for a simple yet effective way to transform deterministic ESFM to a probabilistic FM. We present findings using dense gridded data (ERA5, CMIP6), regionally masked dense data, sparse gridded MODIS satellite data, and station data. Results demonstrate competitive or superior performance relative to state-of-the-art benchmarks. Case studies of Super Typhoon Doksuri (2023) and 2024 sudden stratospheric warming events show accurate positional and magnitude estimations of extreme weather. ESFM retains the strengths of previous foundation models, such as long-term stability, but facilitates application to a variety of downstream tasks.

State-of-the-art medium-range AI weather models can outperform traditional Numerical Weather Prediction (NWP) but require massive training budgets. This restricts usage for under-resourced groups and severely limits fast model iteration. Here we develop Otter Weather, a highly efficient spatiotemporal forecasting model designed to democratise high-performance weather prediction with AI. Evaluated on ERA5 reanalysis data at 1.5° resolution using standard WeatherBench protocols, the Otter family significantly advances the skill-compute Pareto frontier. The deterministic version outperforms the best NWP baseline by 9.6% at a 24-hour lead time while requiring fewer than 3.5 A100-days for training. It provides a 2x efficiency gain over lightweight AI models and a 100-fold reduction in compute compared to resource-intensive frontier architectures. We extend these efficiency gains into probabilistic forecasting by training via the Continuous Ranked Probability Score (CRPS). Scaling to a larger architecture, Otter-XL achieves a 9.7% CRPS improvement over the IFS ENS baseline. This yields an almost two-fold increase in predictive skill over comparable lightweight models at similar compute budgets. Otter-XL also outperforms frontier architectures like GenCast by over 2%, while using an order of magnitude less compute. Finally, Otter is applied out-of-the-box to a complex acoustic scattering PDE task where it outperforms a state-of-the-art foundation modelling approach, suggesting that the advances made here might apply across a range of scientific domains.

Modern climate projections lack adequate spatial and temporal resolution due to computational constraints. A consequence is inaccurate and imprecise predictions of critical processes such as storms. Hybrid methods that combine physics with machine learning (ML) have introduced a new generation of higher fidelity climate simulators that can sidestep Moore's Law by outsourcing compute-hungry, short, high-resolution simulations to ML emulators. However, this hybrid ML-physics simulation approach requires domain-specific treatment and has been inaccessible to ML experts because of lack of training data and relevant, easy-to-use workflows. We present ClimSim, the largest-ever dataset designed for hybrid ML-physics research. It comprises multi-scale climate simulations, developed by a consortium of climate scientists and ML researchers. It consists of 5.7 billion pairs of multivariate input and output vectors that isolate the influence of locally-nested, high-resolution, high-fidelity physics on a host climate simulator's macro-scale physical state. The dataset is global in coverage, spans multiple years at high sampling frequency, and is designed such that resulting emulators are compatible with downstream coupling into operational climate simulators. We implement a range of deterministic and stochastic regression baselines to highlight the ML challenges and their scoring. The data (https://huggingface.co/datasets/LEAP/ClimSim_high-res, https://huggingface.co/datasets/LEAP/ClimSim_low-res, and https://huggingface.co/datasets/LEAP/ClimSim_low-res_aqua-planet) and code (https://leap-stc.github.io/ClimSim) are released openly to support the development of hybrid ML-physics and high-fidelity climate simulations for the benefit of science and society.