Daily Papers

Reinforcement learning (RL) for post-training large language models (LLMs) incurs substantial computation and memory overhead during rollout generation, which motivates low-precision rollout for efficient RL training. However, existing FP4 RL methods suffer from a key limitation: they primarily optimize quantization accuracy on the training and rollout paths independently rather than directly reducing the discrepancy between the two quantized execution paths. In this work, we propose TRACE (Train-Rollout Quantization Alignment via Compact GuidancE), an FP4 quantization framework for RL training of Mixture-of-Experts (MoE) language models that addresses the limitation of existing FP4 RL methods. TRACE incorporates rollout-guided quantization-aware training that uses rollout-side quantization outcomes to guide training-side FP4 rounding decisions, directly reducing train-rollout discrepancy. Moreover, TRACE adopts an efficient quantization-information caching scheme that selectively retains mantissa and scale information from deeper layers to reduce the storage and communication overhead introduced by rollout guidance. We evaluate TRACE on four large-scale MoE language models across reasoning, coding, and long-horizon RL tasks. Our results demonstrate that TRACE enables joint FP4 weight/activation and FP4 KV-cache rollout with RL performance comparable to BF16 rollout, while achieving up to 5.4xrollout speedup and strong final FP4 performance compared with post-hoc FP4 quantization of BF16-trained policies.

Major open-source serving stacks reuse the key-value tensors of a shared prefix by default. We measure what this prefix reuse costs in reproducibility. Holding model, decoding, seed and request order fixed at batch size one, we ran an eighty-episode multi-turn agentic tool-use workload with prefix reuse on and off across two engines and four weight formats. Without prefix reuse, repeated runs reproduced every token and log-probability in all ten configurations. With it, cache-hit and recompute paths diverged on both engines. On llama.cpp with GGUF weights this path divergence rises with quantization: for Qwen2.5-7B over ten independent server histories, it reached 37.4 percent of episodes at 16-bit and 82.5 percent at four-bit. Near-tie decisions became only about 1.2 times as common, while the cache-path change in top-two margins grew 4.9-fold from 16-bit to three-bit. Serving four-bit weights through 16-bit kernels left divergence not detectably different from 16-bit, placing the amplification mainly in the quantized execution path. At Q4_K_M, run-to-run divergence came mainly from llama.cpp's server-level prompt cache: under the canonical episode order it moved divergence by 37.5 points, and at its default, divergence spanned 20.0 to 28.7 percent under five random orders. With cache state restored, each path reproduced exactly while the two still differed. In the tested stacks, cached serving is irreproducible because the cache state is absent from the request and not reset by default. A single-turn bridge shows path divergence reaching task outcomes with no detectable net change in accuracy. We release the harness, logs, and analysis pipeline.

Vision language models have achieved strong performance across a wide range of multimodal applications, yet their substantial computational and memory costs hinder efficient deployment. Visual token pruning and post-training quantization reduce inference overhead along two complementary dimensions, namely sequence length and numerical precision. Existing workflows typically optimize these techniques independently or apply them sequentially. Their distinct optimization objectives leave critical interactions unaddressed and constrain the achievable compression performance. We revisit these designs and present P4Q, a practical co-design framework that jointly optimizes visual token pruning and low-bit quantization for efficient VLM inference. First, P4Q introduces a quantization-aware visual token selection strategy before the LLM. It applies fake quantization to copies of the features produced by the projector and selects visual tokens using statistics computed from these fake-quantized features, thereby conditioning the selector's feature-based decisions on simulated low-bit perturbations. Second, P4Q introduces a pruning-aware quantization calibration strategy. It uses the same selection strategy as pruning to calibrate the quantized model on the retained-token distribution, thereby aligning the calibration process with the pruned execution path used during deployment. By coupling these two components, P4Q achieves substantial inference speedups while maintaining comparable task performance, resulting in a better efficiency-accuracy trade-off than independently optimized pipelines. For instance, on LLaVA-NeXT, P4Q achieves an average end-to-end inference speedup of 2.8x across eight distinct test sets, while retaining higher accuracy than prior compression and quantization methods.

Speculative Decoding (SD) has emerged as a premier technique for accelerating Large Language Model (LLM) inference by decoupling token generation into rapid drafting and parallel verification. While recent advancements in self-speculation and lookahead decoding have successfully minimized drafting overhead, they have shifted the primary performance bottleneck to the verification phase. Since verification requires a full forward pass of the target model, it remains strictly memory-bandwidth bound, fundamentally limiting the maximum achievable speedup.In this paper, we introduce Quasar (Quantized Self-speculative Acceleration for Rapid Inference), a novel, training-free framework designed to overcome this "memory wall" by employing low-bit quantization specifically for the verification stage. Our empirical analysis reveals that while aggressive structural pruning significantly degrades verification accuracy, quantization-based verification preserves the logit distribution with high fidelity while effectively halving memory traffic. Extensive experiments on state-of-the-art models (e.g., OpenPangu and Qwen3) demonstrate that Quasar maintains a speculative acceptance length comparable to full-precision methods while achieving a 1.28times improvement in end-to-end throughput. Being orthogonal to existing drafting strategies, Quasar offers a generic and efficient pathway to accelerate the verification leg of speculative execution. Code is available at https://github.com/Tom-HG/Quasar.

Efficient deployment of large language models (LLMs) requires extreme quantization, forcing a critical trade-off between low-bit efficiency and performance. Residual binarization enables hardware-friendly, matmul-free inference by stacking binary (pm1) layers, but is plagued by pathological feature co-adaptation. We identify a key failure mode, which we term inter-path adaptation: during quantization-aware training (QAT), parallel residual binary paths learn redundant features, degrading the error-compensation structure and limiting the expressive capacity of the model. While prior work relies on heuristic workarounds (e.g., path freezing) that constrain the solution space, we propose RaBiT, a novel quantization framework that resolves co-adaptation by algorithmically enforcing a residual hierarchy. Its core mechanism sequentially derives each binary path from a single shared full-precision weight, which ensures that every path corrects the error of the preceding one. This process is stabilized by a robust initialization that prioritizes functional preservation over mere weight approximation. RaBiT redefines the 2-bit accuracy-efficiency frontier: it achieves state-of-the-art performance, rivals even hardware-intensive Vector Quantization (VQ) methods, and delivers a 4.49times inference speed-up over full-precision models on an RTX 4090.

Existing low-bit KV-cache quantizers often treat each cached key as a flat vector. Under RoPE, however, a key's contribution to a future attention logit decomposes into a position-dependent sum over two-dimensional frequency blocks. This makes key-cache quantization a block-wise bit-allocation problem: high-energy RoPE blocks are more sensitive to quantization error and should receive more bits. We introduce Block-GTQ, a RoPE-aware bit allocator for key-cache quantization built on TurboQuant-MSE(TQ-MSE). For each layer and KV head, Block-GTQ computes a label-free energy score for each RoPE block and greedily allocates integer bit widths by marginal gain. Under matched K/V bit budgets, Block-GTQ better preserves RoPE query-key logits on a ten-model diagnostic panel, cutting per-layer MAE by 32-80% at 2 and 3 b/dim K-only quantization and winning all 367/367 layer comparisons against uniform TQ-MSE. These fidelity gains translate to stronger downstream long-context retrieval, understanding, and reasoning. At K2V2 on Llama-3.1-8B-Instruct, Block-GTQ raises the six-task NIAH average from 70.6 to 97.4, and the LongBench-EN average from 36.87 to 53.31. On AIME 2024/2025 with DeepSeek-R1-Distill-Qwen-7B, without an fp16 recent-key buffer, Block-GTQ at K3V2 scores 51.7/37.5, close to fp16's 54.2/37.9, whereas uniform TQ-MSE collapses to 0.0/0.0. We further implement a packed-cache serving path. On a single H800 GPU with Qwen2.5-3B-Instruct, packed K3V3 achieves 3.24x KV-cache compression with fp16-comparable quality, runs 1.34x faster than fp16 FlashAttention2 at 128K context, reduces peak memory from 56.31 GB to 19.85 GB, and remains feasible at 256K and 512K where fp16 OOMs. Code is available at https://github.com/JIA-Lab-research/blockgtq.

Low-bit post-training quantization (PTQ) is a practical route to deploy reasoning-capable LLMs under tight memory and latency budgets, yet it can markedly impair mathematical reasoning (drops up to 69.81% in our harder settings). We address two deployment-critical questions with process-level precision: Where along a step-structured solution does degradation first arise? How to mitigate it while staying in the low-bit regime? Across widely used PTQ methods (AWQ, GPTQ, SmoothQuant), open-source model families (Qwen, LLaMA; 0.5--7B), and math reasoning benchmarks (GSM8K, MATH, AIME), we perform format-aligned chain-of-thought with step-aligned attribution and uncover two robust regularities: (i) PTQ disproportionately elevates method and execution errors relative to high-level conceptual mistakes; and (ii) failures emerge early, with the first vulnerable step flipping and cascading to the final answer. These regularities suggest a general intervention principle: restore local token-level margins exactly at the earliest failure frontier. We instantiate this principle as a lightweight measurerightarrowlocaterightarrowrestore loop that operates directly on the quantized model: detect the first faulty step, construct our "Silver Bullet" datasets, and apply small-scale supervised/preference tuning. In our settings, as few as 332 curated examples and 3--5 minutes of compute on a single GPU recover 4-bit weight math reasoning toward the full-precision baseline while preserving PTQ efficiency. Our framework is quantizer- and architecture-agnostic within the evaluated regimes, and turns low-bit degradation from a global accuracy problem into a local, reproducible process intervention.

QSE is emerging as a critical discipline to make quantum computing accessible to a broader developer community; however, most quantum development environments still require developers to engage with low-level details across the software stack - including problem encoding, circuit construction, algorithm configuration, hardware selection, and result interpretation - making them difficult for classical software engineers to use. To bridge this gap, we present C2|Q>, a hardware-agnostic quantum software development framework that translates specific types of classical specifications into quantum-executable programs while preserving methodological rigor. The framework applies modular SE principles by classifying the workflow into three core modules: an encoder that classifies problems, produces Quantum-Compatible Formats, and constructs quantum circuits, a deployment module that generates circuits and recommends hardware based on fidelity, runtime, and cost, and a decoder that interprets quantum outputs into classical solutions. In evaluation, the encoder module achieved a 93.8% completion rate, the hardware recommendation module consistently selected the appropriate quantum devices for workloads scaling up to 56 qubits. End-to-end experiments on 434 Python programs and 100 JSON problem instances show that the full C2|Q> workflow executes reliably on simulators and can be deployed successfully on representative real quantum hardware, with empirical runs limited to small- and medium-sized instances consistent with current NISQ capabilities. These results indicate that C2|Q> lowers the entry barrier to quantum software development by providing a reproducible, extensible toolchain that connects classical specifications to quantum execution. The open-source implementation of C2|Q> is available at https://github.com/C2-Q/C2Q and as a Python package at https://pypi.org/project/c2q-framework/.

Multi-Head Latent Attention (MLA) enables expressive multi-head attention with compact caches for its content and decoupled RoPE paths, yet cache memory still scales linearly with context length and batch size. In this work, we establish a systematic model of MLA's dual-path quantization errors, characterizing their distinct effects on attention-output distortion and explaining the pronounced amplification of RoPE-path errors. Guided by this analysis, we introduce QuantMLA, a function-aligned framework for low-bit dual-path quantization. We derive path-specific transformation spaces that preserve full-precision computation while remaining fully fusible into model parameters offline, eliminating online transformation overhead. Within these spaces, QuantMLA learns path-specific transformations with function-aligned objectives: attention-output reconstruction captures the content path's coupled matching and aggregation errors, while positional QK reconstruction preserves the RoPE-induced component of the attention logits and admits a theoretical bound on output distortion. Across four MLA model families, QuantMLA enables, to our knowledge, the first reported joint INT4 caching of the content and RoPE caches with minimal accuracy degradation. Further compressing the content cache to INT2 while retaining the RoPE key cache at INT4 maintains competitive performance on challenging reasoning and code benchmarks. We develop a native low-bit MLA attention kernel that integrates unpacking and dequantization directly into attention computation. The physical cache layout provides 3.59x compression at 128K context, while a cache-pressure serving workload achieves 5.168x higher whole-job output throughput than BF16. The code will be released upon acceptance.

Near-term quantum workloads are shaped by coupled compilation and execution choices: qubit layout, routing, basis translation, gate suppression, measurement mitigation, shot budget, and artifact reproducibility. This paper analyzes QBalance, a Python workflow library for dataset-level selection among quantum compilation, noise-suppression, and error-mitigation strategies built on the Qiskit ecosystem. The contribution is formulated as a finite multi-objective strategy-selection problem over circuits, backends, and transformation policies. The manuscript derives the implemented weighted objective, non-dominated selection rule, survival-product error proxy, Bayesian linear candidate-ordering surrogate, and distributional diagnostics. It also positions the system relative to established work on Qiskit pass-manager compilation, SABRE-style routing, randomized compiling, dynamical decoupling, zero-noise extrapolation, matrix-free measurement mitigation, circuit cutting, and Thompson sampling. The analysis shows that QBalance provides a reproducible orchestration and artifact model for quantum workflow studies. It also establishes precise limitations: the current bandit mechanism orders candidates but does not reduce the number of candidate evaluations, the custom layout heuristic is greedy and only partially topology-aware, the implemented ZNE helper is parity-centered, and the cutting integration is a hook rather than a full reconstruction pipeline.

Quantization is a practical technique for making large language models easier to deploy by reducing the precision used to store and operate on model weights. This can lower memory use and improve runtime feasibility on constrained hardware, which is especially relevant for users running models locally. Quantization in llama.cpp enables large language models to run on commodity hardware, but available formats are often evaluated inconsistently, making it hard to choose among schemes. We present a unified empirical study of the llama.cpp quantization on a single modern model, Llama-3.1-8B-Instruct (FP16, GGUF), covering 3-8 bit K-quant and legacy formats. We evaluate downstream task performance across standard reasoning, knowledge, instruction-following, and truthfulness benchmarks, and also measure perplexity and CPU throughput (prefill/decoding) alongside model size, compression, and quantization time. Ultimately, this work is a practical guide for choosing a llama.cpp quantization scheme, helping readers make informed, context-aware decisions for their intended use and resource budget.

We distinguish two regimes in task-oriented quantization with a known deterministic oracle action. For an unconstrained interior oracle and a smooth strongly concave utility, quantizing the oracle action by vector Lloyd-Max minimizes a mean-squared-error surrogate and achieves a β/α approximation to the optimal K-level task quantizer. The reduction is exact for isotropic quadratic loss, and the corresponding task rate--distortion function is bracketed by two ordinary rate--distortion functions. Budget-constrained quadratic scheduling is different: the oracle satisfies a variational inequality, so quantizing water-filled actions is not generally optimal. We derive the exact Lloyd-type conditions for this case. The optimal action for a quantizer cell is water-filling evaluated at the cell's conditional-mean load, and the optimal encoder partitions load space into affine power-diagram cells. Thus the correct prescription is to quantize the load and water-fill its centroid. The distinction is material whenever a cell crosses water-filling active-set boundaries.

Recent advancements in reasoning language models have demonstrated remarkable performance in complex tasks, but their extended chain-of-thought reasoning process increases inference overhead. While quantization has been widely adopted to reduce the inference cost of large language models, its impact on reasoning models remains understudied. In this study, we conduct the first systematic study on quantized reasoning models, evaluating the open-sourced DeepSeek-R1-Distilled Qwen and LLaMA families ranging from 1.5B to 70B parameters, and QwQ-32B. Our investigation covers weight, KV cache, and activation quantization using state-of-the-art algorithms at varying bit-widths, with extensive evaluation across mathematical (AIME, MATH-500), scientific (GPQA), and programming (LiveCodeBench) reasoning benchmarks. Our findings reveal that while lossless quantization can be achieved with W8A8 or W4A16 quantization, lower bit-widths introduce significant accuracy risks. We further identify model size, model origin, and task difficulty as critical determinants of performance. Contrary to expectations, quantized models do not exhibit increased output lengths. In addition, strategically scaling the model sizes or reasoning steps can effectively enhance the performance. All quantized models and codes will be open-sourced in https://github.com/ruikangliu/Quantized-Reasoning-Models.

Quantization is a crucial technique for deploying deep learning models on resource-constrained devices, such as embedded FPGAs. Prior efforts mostly focus on quantizing matrix multiplications, leaving other layers like BatchNorm or shortcuts in floating-point form, even though fixed-point arithmetic is more efficient on FPGAs. A common practice is to fine-tune a pre-trained model to fixed-point for FPGA deployment, but potentially degrading accuracy. This work presents QFX, a novel trainable fixed-point quantization approach that automatically learns the binary-point position during model training. Additionally, we introduce a multiplier-free quantization strategy within QFX to minimize DSP usage. QFX is implemented as a PyTorch-based library that efficiently emulates fixed-point arithmetic, supported by FPGA HLS, in a differentiable manner during backpropagation. With minimal effort, models trained with QFX can readily be deployed through HLS, producing the same numerical results as their software counterparts. Our evaluation shows that compared to post-training quantization, QFX can quantize models trained with element-wise layers quantized to fewer bits and achieve higher accuracy on both CIFAR-10 and ImageNet datasets. We further demonstrate the efficacy of multiplier-free quantization using a state-of-the-art binarized neural network accelerator designed for an embedded FPGA (AMD Xilinx Ultra96 v2). We plan to release QFX in open-source format.

Vision-Language-Action (VLA) models exhibit remarkable action generation for embodied intelligence, but their heavy compute make deployment on edge platforms impractical. Aggressive, sub-4-bit weight quantization is the natural solution, yet existing post-training quantization (PTQ) methods suffer severe performance degradation in this regime. To address this, we introduce ActQuant, an action-guided mixed-precision PTQ framework that operates in two stages: (1) an inter-tensor bit allocator that assigns each weight matrix a single bit-width based on how much it contributes to predicting the agent's actions; (2) an intra-tensor scale optimizer tunes per-block quantization scales using action-aware curvature, so that dynamic range is concentrated on the weights most influential for control. To deliver the on-device benefits of our aggressive quantization, we further introduce OmniModel.cpp, an agentic conversion pipeline that ports architectures into a native C/C++ runtime with efficient low-bit kernels. We evaluate ActQuant both in simulation and on a real-world 6-DoF UR3 arm, with all models deployed through OmniModel.cpp. On the LIBERO benchmark, ActQuant is the only method that operates at or below 3 bits-per-weight, retaining 95.0% on OpenVLA-OFT and 94.8% on π_{0.5}. Pushed further, ActQuant reaches 2.5 bpw at 90.1% on OpenVLA-OFT, compressing the backbone from 14.3 GB to 2.7 GB (5.3times). On the physical UR3 arm, π_{0.5} quantized with ActQuant retains the baseline's success rate while reducing the memory footprint by 2.5times.

We introduce QuaRot, a new Quantization scheme based on Rotations, which is able to quantize LLMs end-to-end, including all weights, activations, and KV cache in 4 bits. QuaRot rotates LLMs in a way that removes outliers from the hidden state without changing the output, making quantization easier. This computational invariance is applied to the hidden state (residual) of the LLM, as well as to the activations of the feed-forward components, aspects of the attention mechanism and to the KV cache. The result is a quantized model where all matrix multiplications are performed in 4-bits, without any channels identified for retention in higher precision. Our quantized LLaMa2-70B model has losses of at most 0.29 WikiText-2 perplexity and retains 99% of the zero-shot performance. Code is available at: https://github.com/spcl/QuaRot.

This paper envisions a quantum database (Qute) that treats quantum computation as a first-class execution option. Unlike prior simulation-based methods that either run quantum algorithms on classical machines or adapt existing databases for quantum simulation, Qute instead (i) compiles an extended form of SQL into gate-efficient quantum circuits, (ii) employs a hybrid optimizer to dynamically select between quantum and classical execution plans, (iii) introduces selective quantum indexing, and (iv) designs fidelity-preserving storage to mitigate current qubit constraints. We also present a three-stage evolution roadmap toward quantum-native database. Finally, by deploying Qute on a real quantum processor (origin_wukong), we show that it outperforms a classical baseline at scale, and we release an open-source prototype at https://github.com/weAIDB/Qute.

We discuss an effective paradigm of utilizing AI agents to better compile quantum circuits when one can constrain bottleneck subroutines to have some form of classically verifiable structure. For example, when critical subroutines are composed exclusively of reversible classical logic, phasing operations, and measurement based uncomputation, one can efficiently simulate execution for classical inputs. This property facilitates efficient certification of approximate circuit synthesis via a form of fuzz testing, provided suitable assumptions on the input distribution. While this pattern was recently exploited to improve quantum cryptanalysis circuits, here we highlight the flexibility of the broader approach by discussing three important applications. (1) The computation of 1/x that bottlenecks real space simulations of the Coulomb operator such as those important for modeling inertial confinement fusion reactors. (2) The decoding of Reed-Solomon codes which bottlenecks the decoded quantum interferometry algorithm when used to approximately solve the optimal polynomial intersection problem. And (3) the quantum look-up tables and controlled application of Givens rotations that bottleneck the most performant quantum algorithms for simulating chemistry in second quantization. We discuss reference implementations of these algorithms and how they can be constrained and verified in the interest of seeding a Kaggle competition designed to accelerate AI-based research into the optimization of their compilation.

The advent of Vision-Language-Action (VLA) models represents a significant leap for embodied intelligence, yet their immense computational demands critically hinder deployment on resource-constrained robotic platforms. Intuitively, low-bit quantization is a prevalent and preferred technique for large-scale model compression. However, we find that a systematic analysis of VLA model's quantization is fundamentally lacking. We argue that naively applying uniform-bit quantization from Large Language Models (LLMs) to robotics is flawed, as these methods prioritize passive data fidelity while ignoring how minor action deviations compound into catastrophic task failures. To bridge this gap, we introduce QVLA, the first action-centric quantization framework specifically designed for embodied control. In a sharp departure from the rigid, uniform-bit quantization of LLM-based methods, QVLA introduces a highly granular, channel-wise bit allocation strategy. Its core mechanism is to directly measure the final action-space sensitivity when quantizing each individual channel to various bit-widths. This process yields a precise, per-channel importance metric that guides a global optimization, which elegantly unifies quantization and pruning (0-bit) into a single, cohesive framework. Extensive evaluations on different baselines demonstrate the superiority of our approach. In the LIBERO, the quantization version of OpenVLA-OFT with our method requires only 29.2% of the original model's VRAM while maintaining 98.9% of its original performance and achieving a 1.49x speedup. This translates to a 22.6% performance improvement over the LLM-derived method SmoothQuant. Our work establishes a new, principled foundation for compressing VLA models in robotics, paving the way for deploying powerful, large-scale models on real-world hardware. Code will be released.

Large Language Models (LLMs) are increasingly used for code generation, yet quantum code generation is still evaluated mostly within single frameworks, making it difficult to separate quantum reasoning from framework familiarity. We introduce QuanBench+, a unified benchmark spanning Qiskit, PennyLane, and Cirq, with 42 aligned tasks covering quantum algorithms, gate decomposition, and state preparation. We evaluate models with executable functional tests, report Pass@1 and Pass@5, and use KL-divergence-based acceptance for probabilistic outputs. We additionally study Pass@1 after feedback-based repair, where a model may revise code after a runtime error or wrong answer. Across frameworks, the strongest one-shot scores reach 59.5% in Qiskit, 54.8% in Cirq, and 42.9% in PennyLane; with feedback-based repair, the best scores rise to 83.3%, 76.2%, and 66.7%, respectively. These results show clear progress, but also that reliable multi-framework quantum code generation remains unsolved and still depends strongly on framework-specific knowledge.

We present HyperQuant (Hadamard, optimallY Packing, Entropy Rice-coding), a unified post-training quantization pipeline for the weights and the KV cache of large language and diffusion transformers. Across a suite of self-contained experiments (Table 1), HyperQuant outperforms the recent HIGGS scheme at every operating point from 3 to 5 bits per scalar (bps) on weights, and beats both TurboQuant and OCTOPUS on KV quantization down to 1.7 bps. Beyond the LLM setting, HyperQuant quantizes the 19B-parameter LTX-2 DiT video model with no observable per-frame artifacts. End-to-end on an H100 at 4 bps, HyperQuant compresses the linear weights ~3.9x and the KV cache ~3.79x at near-lossless quality. HyperQuant combines four known ideas into a single construction: (i) a per-tile Randomized Hadamard Transform that makes the per-coordinate distribution of weights and activations approximately Gaussian; (ii) quantization to a low-dimensional optimal lattice (E8, D4, A2, or Z); (iii) lossless bit-stripping and near-entropy-optimal variable-length Rice coding of the lattice indices; and (iv) bias-correction methods for the KV cache that keep the reconstruction unbiased under inner products, preserving attention semantics. We further integrate the pipeline with 8-bit and 4-bit Tensor-Core MMA paths (fp8-e4m3, int8, nvfp4, mxfp4), and find that int8 beats fp8 on the post-RHT lattice output. Project page: https://moonmath.ai/hyperquant/

As it becomes increasingly difficult to monolithically scale a quantum processor, distributed quantum computing (DQC) offers an alternative by distributing qubits across multiple smaller interconnected quantum processor modules. In such an architecture, the challenge of quantum circuit compilation shifts from placing and routing qubits within one module to placing, routing and using the qubits efficiently across modules. In order to optimize circuit execution time, the right state-dependent networking decisions must be found, such as when and where to generate shared remote quantum states to support remote operations. Reinforcement learning (RL) provides a natural framework for this problem, generating a compilation policy that can generalize across different circuits. Building on the framework of Promponas et al. (2024), we introduce an agent that combines a novel action-space formulation with effective action-masking strategies. A comprehensive numerical comparison of the two approaches under different coupling constraints shows that our agent achieves improved training and inference performance with a relative reduction in the modeled execution time of up to 35\%.

We present APQ for efficient deep learning inference on resource-constrained hardware. Unlike previous methods that separately search the neural architecture, pruning policy, and quantization policy, we optimize them in a joint manner. To deal with the larger design space it brings, a promising approach is to train a quantization-aware accuracy predictor to quickly get the accuracy of the quantized model and feed it to the search engine to select the best fit. However, training this quantization-aware accuracy predictor requires collecting a large number of quantized <model, accuracy> pairs, which involves quantization-aware finetuning and thus is highly time-consuming. To tackle this challenge, we propose to transfer the knowledge from a full-precision (i.e., fp32) accuracy predictor to the quantization-aware (i.e., int8) accuracy predictor, which greatly improves the sample efficiency. Besides, collecting the dataset for the fp32 accuracy predictor only requires to evaluate neural networks without any training cost by sampling from a pretrained once-for-all network, which is highly efficient. Extensive experiments on ImageNet demonstrate the benefits of our joint optimization approach. With the same accuracy, APQ reduces the latency/energy by 2x/1.3x over MobileNetV2+HAQ. Compared to the separate optimization approach (ProxylessNAS+AMC+HAQ), APQ achieves 2.3% higher ImageNet accuracy while reducing orders of magnitude GPU hours and CO2 emission, pushing the frontier for green AI that is environmental-friendly. The code and video are publicly available.

Model quantization is a widely used technique to compress and accelerate deep neural network (DNN) inference. Emergent DNN hardware accelerators begin to support mixed precision (1-8 bits) to further improve the computation efficiency, which raises a great challenge to find the optimal bitwidth for each layer: it requires domain experts to explore the vast design space trading off among accuracy, latency, energy, and model size, which is both time-consuming and sub-optimal. Conventional quantization algorithm ignores the different hardware architectures and quantizes all the layers in a uniform way. In this paper, we introduce the Hardware-Aware Automated Quantization (HAQ) framework which leverages the reinforcement learning to automatically determine the quantization policy, and we take the hardware accelerator's feedback in the design loop. Rather than relying on proxy signals such as FLOPs and model size, we employ a hardware simulator to generate direct feedback signals (latency and energy) to the RL agent. Compared with conventional methods, our framework is fully automated and can specialize the quantization policy for different neural network architectures and hardware architectures. Our framework effectively reduced the latency by 1.4-1.95x and the energy consumption by 1.9x with negligible loss of accuracy compared with the fixed bitwidth (8 bits) quantization. Our framework reveals that the optimal policies on different hardware architectures (i.e., edge and cloud architectures) under different resource constraints (i.e., latency, energy and model size) are drastically different. We interpreted the implication of different quantization policies, which offer insights for both neural network architecture design and hardware architecture design.

Recent reasoning-focused language models achieve high accuracy by generating lengthy intermediate reasoning paths before producing final answers. While this approach is effective in solving problems that require logical thinking, long reasoning paths significantly increase memory usage and throughput of token generation, limiting the practical deployment of such models. We propose Reasoning Path Compression (RPC), a training-free method that accelerates inference by leveraging the semantic sparsity of reasoning paths. RPC periodically compresses the KV cache by retaining KV cache that receive high importance score, which are computed using a selector window composed of recently generated queries. Experiments show that RPC improves generation throughput of QwQ-32B by up to 1.60times compared to the inference with full KV cache, with an accuracy drop of 1.2% on the AIME 2024 benchmark. Our findings demonstrate that semantic sparsity in reasoning traces can be effectively exploited for compression, offering a practical path toward efficient deployment of reasoning LLMs. Our code is available at https://github.com/jiwonsong-dev/ReasoningPathCompression.

Although LLM inference has emerged as a critical workload for many downstream applications, efficiently inferring LLMs is challenging due to the substantial memory footprint and bandwidth requirements. In parallel, compute capabilities have steadily outpaced both memory capacity and bandwidth over the last few decades, a trend that remains evident in modern GPU hardware and exacerbates the challenge of LLM inference. As such, new algorithms are emerging that trade increased computation for reduced memory operations. To that end, we present XQuant, which takes advantage of this trend, enabling an order-of-magnitude reduction in memory consumption through low-bit quantization with substantial accuracy benefits relative to state-of-the-art KV cache quantization methods. We accomplish this by quantizing and caching the layer input activations X, instead of using standard KV caching, and then rematerializing the Keys and Values on-the-fly during inference. This results in an immediate 2times memory savings compared to KV caching. By applying XQuant, we achieve up to sim 7.7times memory savings with <0.1 perplexity degradation compared to the FP16 baseline. Furthermore, our approach leverages the fact that X values are similar across layers. Building on this observation, we introduce XQuant-CL, which exploits the cross-layer similarity in the X embeddings for extreme compression. Across different models, XQuant-CL attains up to 10times memory savings relative to the FP16 baseline with only 0.01 perplexity degradation, and 12.5times memory savings with only 0.1 perplexity degradation. XQuant exploits the rapidly increasing compute capabilities of hardware platforms to eliminate the memory bottleneck, while surpassing state-of-the-art KV cache quantization methods and achieving near-FP16 accuracy across a wide range of models.

Quantizing neural networks is one of the most effective methods for achieving efficient inference on mobile and embedded devices. In particular, mixed precision quantized (MPQ) networks, whose layers can be quantized to different bitwidths, achieve better task performance for the same resource constraint compared to networks with homogeneous bitwidths. However, finding the optimal bitwidth allocation is a challenging problem as the search space grows exponentially with the number of layers in the network. In this paper, we propose QBitOpt, a novel algorithm for updating bitwidths during quantization-aware training (QAT). We formulate the bitwidth allocation problem as a constraint optimization problem. By combining fast-to-compute sensitivities with efficient solvers during QAT, QBitOpt can produce mixed-precision networks with high task performance guaranteed to satisfy strict resource constraints. This contrasts with existing mixed-precision methods that learn bitwidths using gradients and cannot provide such guarantees. We evaluate QBitOpt on ImageNet and confirm that we outperform existing fixed and mixed-precision methods under average bitwidth constraints commonly found in the literature.

Model signing authenticates the full-precision weights W an LLM is released with, yet users run a quantized artifact Q whose producing transformation is not uniquely determined under current disclosure. We separate the non-environment inputs from the execution environment E and measure a quantity that, to our knowledge, has not been measured before: the Independent Verifiability Rate (IVR), the fraction of a popularity-sampled GGUF ecosystem that a third party can re-derive bit-for-bit. Across the 200 most-downloaded Hugging Face GGUF repositories (198 in scope), no artifact or model card records the build environment, so under a recorded-inputs protocol the IVR is 0/198. Yet the artifacts are not irreproducible. On four in-sample repositories that disclose their inputs, the card's information alone reproduces no Q4_K_M file, but two coordinates the card omits - the build's floating-point-contraction setting and, for hybrid models, the per-tensor quantization recipe - re-derive 7/8 target-quant files bit-for-bit on x86 (5/8 on arm64); the fp16 re-derives from the provider's checkpoint, but the calibration imatrix must be shipped and hash-bound, since recomputing it did not match. An older release additionally pins the instruction set and did not re-derive. Reproducing the divergence reported with llama.cpp PR #25353, we show that E is a necessary coordinate and that one compiler setting yields a unique output across the tested platforms at negligible quality cost (+0.06% perplexity). As a security characterization, benign floating-point non-determinism separates from uniformly placed nibble-flip tampering above a detection floor that grows with the environments a verifier must allow, but a targeted embedding edit evades the statistic, so the proposed protocol rests on exact re-derivation; adversarial-fp16 attacks lie outside it. We release the audit data and a re-runnable harness.

Large language model (LLM) inference is often bounded by memory footprint and memory bandwidth in resource-constrained deployments, making quantization a fundamental technique for efficient serving. While post-training quantization (PTQ) maintains high fidelity at 4-bit, it deteriorates at 2-3 bits. Fundamentally, existing methods enforce a shape-invariant quantization grid (e.g., the fixed uniform intervals of UINT2) for each group, severely restricting the feasible set for error minimization. To address this, we propose Bit-Plane Decomposition Quantization (BPDQ), which constructs a variable quantization grid via bit-planes and scalar coefficients, and iteratively refines them using approximate second-order information while progressively compensating quantization errors to minimize output discrepancy. In the 2-bit regime, BPDQ enables serving Qwen2.5-72B on a single RTX 3090 with 83.85% GSM8K accuracy (vs. 90.83% at 16-bit). Moreover, we provide theoretical analysis showing that the variable grid expands the feasible set, and that the quantization process consistently aligns with the optimization objective in Hessian-induced geometry. Code: github.com/KingdalfGoodman/BPDQ.

A lot of recent progress has been made in ultra low-bit quantization, promising significant improvements in latency, memory footprint and energy consumption on edge devices. Quantization methods such as Learned Step Size Quantization can achieve model accuracy that is comparable to full-precision floating-point baselines even with sub-byte quantization. However, it is extremely challenging to deploy these ultra low-bit quantized models on mainstream CPU devices because commodity SIMD (Single Instruction, Multiple Data) hardware typically supports no less than 8-bit precision. To overcome this limitation, we propose DeepGEMM, a lookup table based approach for the execution of ultra low-precision convolutional neural networks on SIMD hardware. The proposed method precomputes all possible products of weights and activations, stores them in a lookup table, and efficiently accesses them at inference time to avoid costly multiply-accumulate operations. Our 2-bit implementation outperforms corresponding 8-bit integer kernels in the QNNPACK framework by up to 1.74x on x86 platforms.

Large Language Models (LLMs) have revolutionized natural language processing tasks. However, their practical application is constrained by substantial memory and computational demands. Post-training quantization (PTQ) is considered an effective method to accelerate LLM inference. Despite its growing popularity in LLM model compression, PTQ deployment faces two major challenges. First, low-bit quantization leads to performance degradation. Second, restricted by the limited integer computing unit type on GPUs, quantized matrix operations with different precisions cannot be effectively accelerated. To address these issues, we introduce a novel arbitrary-bit quantization algorithm and inference framework, ABQ-LLM. It achieves superior performance across various quantization settings and enables efficient arbitrary-precision quantized inference on the GPU. ABQ-LLM introduces several key innovations: (1) a distribution correction method for transformer blocks to mitigate distribution differences caused by full quantization of weights and activations, improving performance at low bit-widths. (2) the bit balance strategy to counteract performance degradation from asymmetric distribution issues at very low bit-widths (e.g., 2-bit). (3) an innovative quantization acceleration framework that reconstructs the quantization matrix multiplication of arbitrary precision combinations based on BTC (Binary TensorCore) equivalents, gets rid of the limitations of INT4/INT8 computing units. ABQ-LLM can convert each component bit width gain into actual acceleration gain, maximizing performance under mixed precision(e.g., W6A6, W2A8). Based on W2*A8 quantization configuration on LLaMA-7B model, it achieved a WikiText2 perplexity of 7.59 (2.17downarrow vs 9.76 in AffineQuant). Compared to SmoothQuant, we realized 1.6times acceleration improvement and 2.7times memory compression gain.

Quantization emerges as one of the most promising approaches for deploying advanced deep models on resource-constrained hardware. Mixed-precision quantization leverages multiple bit-width architectures to unleash the accuracy and efficiency potential of quantized models. However, existing mixed-precision quantization suffers exhaustive search space that causes immense computational overhead. The quantization process thus relies on separate high-performance devices rather than locally, which also leads to a significant gap between the considered hardware metrics and the real deployment.In this paper, we propose an On-chip Hardware-aware Quantization (OHQ) framework that performs hardware-aware mixed-precision quantization without accessing online devices. First, we construct the On-chip Quantization Awareness (OQA) pipeline, enabling perceive the actual efficiency metrics of the quantization operator on the hardware.Second, we propose Mask-guided Quantization Estimation (MQE) technique to efficiently estimate the accuracy metrics of operators under the constraints of on-chip-level computing power.By synthesizing network and hardware insights through linear programming, we obtain optimized bit-width configurations. Notably, the quantization process occurs on-chip entirely without any additional computing devices and data access. We demonstrate accelerated inference after quantization for various architectures and compression ratios, achieving 70% and 73% accuracy for ResNet-18 and MobileNetV3, respectively. OHQ improves latency by 15~30% compared to INT8 on deployment.

Serving LLMs requires substantial memory due to the storage requirements of Key-Value (KV) embeddings in the KV cache, which grows with sequence length. An effective approach to compress KV cache is quantization. However, traditional quantization methods face significant memory overhead due to the need to store quantization constants (at least a zero point and a scale) in full precision per data block. Depending on the block size, this overhead can add 1 or 2 bits per quantized number. We introduce QJL, a new quantization approach that consists of a Johnson-Lindenstrauss (JL) transform followed by sign-bit quantization. In contrast to existing methods, QJL eliminates memory overheads by removing the need for storing quantization constants. We propose an asymmetric estimator for the inner product of two vectors and demonstrate that applying QJL to one vector and a standard JL transform without quantization to the other provides an unbiased estimator with minimal distortion. We have developed an efficient implementation of the QJL sketch and its corresponding inner product estimator, incorporating a lightweight CUDA kernel for optimized computation. When applied across various LLMs and NLP tasks to quantize the KV cache to only 3 bits, QJL demonstrates a more than fivefold reduction in KV cache memory usage without compromising accuracy, all while achieving faster runtime. Codes are available at https://github.com/amirzandieh/QJL.

Post-Training Quantization (PTQ) is essential for deploying Large Language Models (LLMs) on memory-constrained devices, yet it renders models static and difficult to fine-tune. Standard fine-tuning paradigms, including Reinforcement Learning (RL), fundamentally rely on backpropagation and high-precision weights to compute gradients. Thus they cannot be used on quantized models, where the parameter space is discrete and non-differentiable. While Evolution Strategies (ES) offer a backpropagation-free alternative, optimization of the quantized parameters can still fail due to vanishing or inaccurate gradient. This paper introduces Quantized Evolution Strategies (QES), an optimization paradigm that performs full-parameter fine-tuning directly in the quantized space. QES is based on two innovations: (1) it integrates accumulated error feedback to preserve high-precision gradient signals, and (2) it utilizes a stateless seed replay to reduce memory usage to low-precision inference levels. QES significantly outperforms the state-of-the-art zeroth-order fine-tuning method on arithmetic reasoning tasks, making direct fine-tuning for quantized models possible. It therefore opens up the possibility for scaling up LLMs entirely in the quantized space. The source code is available at https://github.com/dibbla/Quantized-Evolution-Strategies .

Context-heavy agents place unusual pressure on the key-value (KV) cache: long prefixes are reused across many short turns, while concurrency determines whether the serving system can keep GPUs utilized. We study 4-bit KV-cache compression for this setting, using TurboQuant-style rotation and codebook quantization as a quality anchor and vLLM FP8 KV caching as the deployment anchor. We report three contributions. First, we frame 4-bit KV caching around multi-round agent workloads where task quality, cache residency, and serving throughput must be measured jointly. Second, we describe the practical design choices needed to make the 4-bit path robust, including asymmetric K/V treatment, Walsh-Hadamard rotation, QJL removal, and block-scale variants. Third, we present serving optimizations on AMD GPUs, including optimized decode-attention kernels and UltraQuant, an FP4 approximation path that uses FP8 queries, FP4 KV tensors, UE8M0 group scales, and native scaled-MFMA support on CDNA4. On a long-context, multi-turn agentic workload, UltraQuant cuts P50 time-to-first-token by 3.47x in the cache-pressured late rounds (2.3x across all rounds) and raises output throughput by 1.63x over the FP8 KV baseline.

With unprecedented rapid development, deep neural networks (DNNs) have deeply influenced almost all fields. However, their heavy computation costs and model sizes are usually unacceptable in real-world deployment. Model quantization, an effective weight-lighting technique, has become an indispensable procedure in the whole deployment pipeline. The essence of quantization acceleration is the conversion from continuous floating-point numbers to discrete integer ones, which significantly speeds up the memory I/O and calculation, i.e., addition and multiplication. However, performance degradation also comes with the conversion because of the loss of precision. Therefore, it has become increasingly popular and critical to investigate how to perform the conversion and how to compensate for the information loss. This article surveys the recent five-year progress towards low-bit quantization on DNNs. We discuss and compare the state-of-the-art quantization methods and classify them into 8 main categories and 24 sub-categories according to their core techniques. Furthermore, we shed light on the potential research opportunities in the field of model quantization. A curated list of model quantization is provided at https://github.com/Kai-Liu001/Awesome-Model-Quantization.

Deep neural networks have achieved state-of-the-art results in a wide range of applications, from natural language processing and computer vision to speech recognition. However, as tasks become increasingly complex, model sizes continue to grow, posing challenges in latency and memory efficiency. To meet these constraints, post-training quantization has emerged as a promising solution. In this paper, we propose a novel hardware-efficient quantization and inference scheme that exploits hardware advantages with minimal accuracy degradation. Specifically, we introduce a W4A8 scheme, where weights are quantized and stored using 4-bit integer precision, and inference computations are performed using 8-bit floating-point arithmetic, demonstrating significant speedups and improved memory utilization compared to 16-bit operations, applicable on various modern accelerators. To mitigate accuracy loss, we develop a novel quantization algorithm, dubbed Dual Precision Quantization (DPQ), that leverages the unique structure of our scheme without introducing additional inference overhead. Experimental results demonstrate improved performance (i.e., increased throughput) while maintaining tolerable accuracy degradation relative to the full-precision model.

We present a reproducible, parameter-driven software workflow for optimizing approximate mutually unbiased basis (AMUB) configurations in arbitrary dimensions d using a Lie-algebra unitary parameterization. The workflow is designed for portable execution across CPU, Apple MPS, CUDA-capable GPU, and HPC backends, using a Taylor-series matrix exponential layer as an accelerator compatibility pathway. As a dimension-six case study, we optimize unanchored configurations across 100 random seeds for basis counts n = 3, 4, 5, 6 in complex128 and complex64 arithmetic. The workflow recovers exact three-basis configurations, identifies a recurrent four-basis partial-exact hub-and-triangle structure, and finds no near-exact pairs for n = 5 or n = 6 in the reported campaigns under the primary tolerance. As a hardware-execution check, we embed the representative d = 6, n = 4 transition unitaries into three-qubit 8x8 unitaries and execute the resulting circuits on the 156-qubit Heron processor ibm-marrakesh using subspace post-selection. The measured QPU pairwise losses are dominated by a hardware and compilation noise floor of approximately 0.02-0.08, associated with compiled circuits averaging 37 native CZ gates, which obscures the distinction between classically near-exact and defective pairs. The results provide a reproducible computational framework for exploring AMUB landscapes, together with an initial assessment of the challenges involved in executing optimized dimension-six unitaries on current quantum hardware.

Matryoshka Quantization (MatQuant) is a recent quantization approach showing that a single integer-quantized model can be served across multiple precisions, by slicing the most significant bits (MSB) at inference time. This enables a single checkpoint to cover a wide range of memory and latency budgets, but renders quantization much more challenging. In particular, the initial MatQuant relies on expensive quantization-aware training (QAT) variants, rather than fast one-shot post training quantization (PTQ), and lacks open-source and kernel support. We address all of these limitations by introducing Post-Training Matryoshka Quantization (MatGPTQ), a new PTQ pipeline that produces a single parent model jointly optimized for multiple target precisions in one-shot, based on a small calibration set. MatGPTQ casts Matryoshka quantization as a multi-precision objective with bit-slicing and cross-bit error compensation, resulting in an algorithm that produces a multi-bit-width, "sliceable" model in a single pass. We also incorporate a new budget-aware search for heterogeneous per-layer bit-witdhs and provide efficient kernels that implement slicing and mixed-precision execution. Across standard LLMs and benchmarks, MatGPTQ preserves high-bit accuracy while substantially improving performance at low-bit-witdh settings. Overall, we establish a new state of the art for Matryoshka-style post-training quantization and make single-checkpoint, multi-precision deployment open and practical. Code is available at https://github.com/IST-DASLab/MatGPTQ.

Post-training quantization (PTQ) reduces the memory footprint of LLMs by quantizing their weights to low-precision. In this work, we introduce QuIP#, a weight-only PTQ method that achieves state-of-the-art results in extreme compression regimes (le 4 bits per weight) using three novel techniques. First, QuIP# improves the incoherence processing from QuIP by using the randomized Hadamard transform, which is faster and has better theoretical properties. Second, QuIP# uses vector quantization techniques to take advantage of the ball-shaped sub-Gaussian distribution that incoherent weights possess: specifically, we introduce a set of hardware-efficient codebooks based on the highly symmetric E_8 lattice, which achieves the optimal 8-dimension unit ball packing. Third, QuIP# uses fine-tuning to improve fidelity to the original model. Our experiments show that QuIP# outperforms existing PTQ methods, enables new behaviors in PTQ scaling, and supports fast inference.

Quantization is a widely-used compression technology to reduce the overhead of serving large language models (LLMs) on terminal devices and in cloud data centers. However, prevalent quantization methods, such as 8-bit weight-activation or 4-bit weight-only quantization, achieve limited performance improvements due to poor support for low-precision (e.g., 4-bit) activation. This work, for the first time, realizes practical W4A4KV4 serving for LLMs, fully utilizing the INT4 tensor cores on modern GPUs and reducing the memory bottleneck caused by the KV cache. Specifically, we propose a novel fine-grained mixed-precision quantization algorithm (FMPQ) that compresses most activations into 4-bit with negligible accuracy loss. To support mixed-precision matrix multiplication for W4A4 and W4A8, we develop a highly optimized W4Ax kernel. Our approach introduces a novel mixed-precision data layout to facilitate access and fast dequantization for activation and weight tensors, utilizing the GPU's software pipeline to hide the overhead of data loading and conversion. Additionally, we propose fine-grained streaming multiprocessor (SM) scheduling to achieve load balance across different SMs. We integrate the optimized W4Ax kernel into our inference framework, COMET, and provide efficient management to support popular LLMs such as LLaMA-3-70B. Extensive evaluations demonstrate that, when running LLaMA family models on a single A100-80G-SMX4, COMET achieves a kernel-level speedup of 2.88times over cuBLAS and a 2.02 times throughput improvement compared to TensorRT-LLM from an end-to-end framework perspective.

Vision-Language-Action (VLA) models enable instruction-following embodied control, but their large compute and memory footprints hinder deployment on resource-constrained robots and edge platforms. While reducing weights to 1-bit precision through binarization can greatly improve efficiency, existing methods fail to narrow the distribution gap between binarized and full-precision weights, causing quantization errors to accumulate under long-horizon closed-loop execution and severely degrade actions. To fill this gap, we propose HBVLA, a VLA-tailored binarization framework. First, we use a policy-aware enhanced Hessian to identify weights that are truly critical for action generation. Then, we employ a sparse orthogonal transform for non-salient weights to induce a low-entropy intermediate state. Finally, we quantize both salient and non-salient weights in the Harr domain with group-wise 1-bit quantization. We have evaluated our approach on different VLAs: on LIBERO, quantized OpenVLA-OFT retains 92.2% of full-precision performance; on SimplerEnv, quantized CogAct retains 93.6%, significantly outperforming state-of-the-art binarization methods. We further validate our method on real-world evaluation suite and the results show that HBVLA incurs only marginal success-rate degradation compared to the full-precision model, demonstrating robust deployability under tight hardware constraints. Our work provides a practical foundation for ultra-low-bit quantization of VLAs, enabling more reliable deployment on hardware-limited robotic platforms.

Recent LLMs increasingly adopt hybrid designs that replace standard attention with linear attention, such as Gated DeltaNet (GDN) and Kimi Delta Attention (KDA). Although they compress the context into a fixed-size recurrent state and substantially reduce the cost of long-context processing, repeatedly reading and updating that state remains a major inference bottleneck. Quantization offers a natural way to reduce this cost, but can significantly degrade model quality, due to the accumulation of rounding errors and the presence of outlier rows and columns in the state. To address these challenges, we propose LeapQuant, a training-free method that achieves near-lossless performance under 8-bit recurrent-state quantization. First, to mitigate error accumulation, we propose per-window quantization, which leaps over a window of tokens and quantizes the state only once at its end. Within a window, outputs are computed from the fixed low-bit state together with high-precision buffered updates. Second, to reduce the error introduced by each quantization, LeapQuant retains the state's largest outliers as a few high-precision Compensator Tokens, which share the update path of real tokens. We then smooth the remaining residual before quantization to further reduce the error. Comprehensive experiments across the Qwen, Kimi, and GLM model families show that LeapQuant substantially reduces memory and compute costs during inference. With accuracy comparable to the FP32 baseline, it achieves average speedups of 2.05--3.70times at the kernel level and 1.47times for end-to-end inference on NVIDIA B200, RTX PRO 6000, and RTX 5090 GPUs.

Recent advancements in large language models (LLMs) are propelling us toward artificial general intelligence with their remarkable emergent abilities and reasoning capabilities. However, the substantial computational and memory requirements limit the widespread adoption. Quantization, a key compression technique, can effectively mitigate these demands by compressing and accelerating LLMs, albeit with potential risks to accuracy. Numerous studies have aimed to minimize the accuracy loss associated with quantization. However, their quantization configurations vary from each other and cannot be fairly compared. In this paper, we present LLMC, a plug-and-play compression toolkit, to fairly and systematically explore the impact of quantization. LLMC integrates dozens of algorithms, models, and hardwares, offering high extensibility from integer to floating-point quantization, from LLM to vision-language (VLM) model, from fixed-bit to mixed precision, and from quantization to sparsification. Powered by this versatile toolkit, our benchmark covers three key aspects: calibration data, algorithms (three strategies), and data formats, providing novel insights and detailed analyses for further research and practical guidance for users. Our toolkit is available at https://github.com/ModelTC/llmc.

Weight quantization effectively reduces memory consumption and enables the deployment of large language models on CPU-based edge devices, yet existing hardware-friendly methods often rely on uniform quantization, which suffers from poor weight-distribution fitting and high dequantization overhead under low-bit settings. In this paper, we propose ELUTQ, an efficient quantization framework featuring a novel quantization format termed Hierarchical Linear Quantization (HLQ). HLQ is designed to better capture the statistical characteristics of weights without increasing the computational cost of bit-serial LUT-based GEMM operations, thereby eliminating dequantization overhead. HLQ is orthogonal to existing quantization algorithms. For the LLaMA3.1-8B model, when combined with post-training quantization, HLQ improves uniform quantization by achieving approximately 8 percent perplexity reduction at 3-bit precision and 85 percent perplexity reduction at 2-bit precision. When combined with efficient finetuning techniques, HLQ further improves model accuracy. We also integrate a disk-offload technique into ELUTQ, enabling it to complete the quantization of LLaMA3.1-70B using only 64 GB of CPU memory and 48 GB of VRAM, significantly reducing the hardware requirements for large-scale model quantization. To enable efficient deployment on edge devices, ELUTQ provides high-performance CPU kernels to support end-to-end inference. Under a 4-thread configuration with batch size 1, our 2-bit quantized LLaMA2-7B model achieves a throughput of more than 25 tokens per second on an Apple M2 chip. All the code is available at https://github.com/Nkniexin/ELUTQ.

Recent advancements in machine learning achieved by Deep Neural Networks (DNNs) have been significant. While demonstrating high accuracy, DNNs are associated with a huge number of parameters and computations, which leads to high memory usage and energy consumption. As a result, deploying DNNs on devices with constrained hardware resources poses significant challenges. To overcome this, various compression techniques have been widely employed to optimize DNN accelerators. A promising approach is quantization, in which the full-precision values are stored in low bit-width precision. Quantization not only reduces memory requirements but also replaces high-cost operations with low-cost ones. DNN quantization offers flexibility and efficiency in hardware design, making it a widely adopted technique in various methods. Since quantization has been extensively utilized in previous works, there is a need for an integrated report that provides an understanding, analysis, and comparison of different quantization approaches. Consequently, we present a comprehensive survey of quantization concepts and methods, with a focus on image classification. We describe clustering-based quantization methods and explore the use of a scale factor parameter for approximating full-precision values. Moreover, we thoroughly review the training of a quantized DNN, including the use of a straight-through estimator and quantization regularization. We explain the replacement of floating-point operations with low-cost bitwise operations in a quantized DNN and the sensitivity of different layers in quantization. Furthermore, we highlight the evaluation metrics for quantization methods and important benchmarks in the image classification task. We also present the accuracy of the state-of-the-art methods on CIFAR-10 and ImageNet.

Migrating quantum algorithms across evolving frameworks introduces subtle behavioral changes that affect accuracy and reproducibility. This paper reports our experience converting the Quantum Approximate Optimization Algorithm (QAOA) from Qiskit Algorithms with Qiskit 1.x (v1 primitives) to a custom implementation using Qiskit 2.x (v2 primitives). Despite identical circuits, optimizers, and Hamiltonians, the new version produced drastically different results. A systematic analysis revealed the root cause: the sampling budget -- the number of circuit executions (shots) per iteration. The library's implicit use of unlimited shots yielded dense probability distributions, whereas the v2 default of 10 000 shots captured only 23% of the state space. Increasing shots to 250 000 restored library-level accuracy. This study highlights how hidden parameters at the quantum-classical interaction level can dominate hybrid algorithm performance and provides actionable recommendations for developers and framework designers to ensure reproducible results in quantum software migration.

Serving large language models cheaply increasingly means shipping models that are both structurally compressed to a fraction of their parameters and quantized to 4 bits. Together these steps degrade reasoning, mathematics, coding, and long-context behavior enough to require a recovery, or healing, stage before deployment. The default recipe, quantization-aware training (QAT), re-fits the compressed, quantized model to hard labels; in our pipeline it converged slowly and collapsed past its peak. We adopted Quantization-Aware Healing (QAH) instead. Because a structurally compressed model is never independently trained at full precision, its bfloat16 checkpoint is a distillation-recovered approximation of the original; QAH distills the 4-bit student directly from the original, uncompressed model. On a GPT-OSS 120B to 60B to MXFP4 pipeline, the QAH student matches or beats its bfloat16 source on 7 of 9 benchmarks at roughly 4 times less weight memory and half the teacher's parameter count, and is released open-weight as Hypernova-60B. Against a matched QAT baseline it reaches a comparable peak about 7 times faster and stays stable under continued training, without hand-tuned early stopping. We also report deployment lessons, including a large, reproducible quality gap between distributed-training backends. Our aim is a recipe deployable without a multi-week hyper-parameter search.

Post-Training Quantization (PTQ) is a powerful technique for model compression, reducing the precision of neural networks without additional training overhead. Recent works have investigated adopting 8-bit floating-point quantization (FP8) in the context of PTQ for model inference. However, the exploration of floating-point formats smaller than 8 bits and their comparison with integer quantization remains relatively limited. In this work, we present minifloats, which are reduced-precision floating-point formats capable of further reducing the memory footprint, latency, and energy cost of a model while approaching full-precision model accuracy. Our work presents a novel PTQ design-space exploration, comparing minifloat and integer quantization schemes across a range of 3 to 8 bits for both weights and activations. We examine the applicability of various PTQ techniques to minifloats, including weight equalization, bias correction, SmoothQuant, gradient-based learned rounding, and the GPTQ method. Our experiments validate the effectiveness of low-precision minifloats when compared to their integer counterparts across a spectrum of accuracy-precision trade-offs on a set of reference deep learning vision workloads. Finally, we evaluate our results against an FPGA-based hardware cost model, showing that integer quantization often remains the Pareto-optimal option, given its relatively smaller hardware resource footprint.

Large language models (LLMs) face significant challenges in specialized biomedical tasks due to the inherent complexity of medical reasoning and the sensitive nature of clinical data. Existing LLMs often struggle with intricate medical terminology and the need for accurate clinical insights, leading to performance reduction when quantized for resource-constrained deployment. To address these issues, we propose Quantized Medical Tree of Thought (QM-ToT), a path-based reasoning framework. QM-ToT leverages a Tree of Thought (ToT) reasoning approach to decompose complex medical problems into manageable subtasks, coupled with evaluator assessment layers. This framework facilitates substantial performance improvements in INT4-quantized models on the challenging MedQAUSMLE dataset. Specifically, we demonstrate a remarkable accuracy increase from 34% to 50% for the LLaMA2-70b model and from 58.77% to 69.49% for LLaMA-3.1-8b. Besides, we also proposed an effect data distillation method based on ToT. Compared to the traditional distillation method, we achieved an improvement of 86. 27% while using only 3.9% of the data.This work, for the first time, showcases the potential of ToT to significantly enhance performance on complex biomedical tasks, establishing a crucial foundation for future advances in deploying high-performing quantized LLM in resource-limited medical settings.

Post-training quantization (PTQ) has emerged as a practical approach to compress large neural networks, making them highly efficient for deployment. However, effectively reducing these models to their low-bit counterparts without compromising the original accuracy remains a key challenge. In this paper, we propose an innovative PTQ algorithm termed COMQ, which sequentially conducts coordinate-wise minimization of the layer-wise reconstruction errors. We consider the widely used integer quantization, where every quantized weight can be decomposed into a shared floating-point scalar and an integer bit-code. Within a fixed layer, COMQ treats all the scaling factor(s) and bit-codes as the variables of the reconstruction error. Every iteration improves this error along a single coordinate while keeping all other variables constant. COMQ is easy to use and requires no hyper-parameter tuning. It instead involves only dot products and rounding operations. We update these variables in a carefully designed greedy order, significantly enhancing the accuracy. COMQ achieves remarkable results in quantizing 4-bit Vision Transformers, with a negligible loss of less than 1% in Top-1 accuracy. In 4-bit INT quantization of convolutional neural networks, COMQ maintains near-lossless accuracy with a minimal drop of merely 0.3% in Top-1 accuracy.

A range of quantum algorithms, especially those leveraging variational parameterization and circuit-based optimization, are being studied as alternatives for solving classically intractable combinatorial optimization problems (COPs). However, their applicability is limited by hardware constraints, including shallow circuit depth, limited qubit counts, and noise. To mitigate these issues, we propose a hybrid classical--quantum framework based on graph shrinking to reduce the number of variables and constraints in QUBO formulations of COPs, while preserving problem structure. Our approach introduces three key ideas: (i) constraint-aware shrinking that prevents merges that will likely violate problem-specific feasibility constraints, (ii) a verification-and-repair pipeline to correct infeasible solutions post-optimization, and (iii) adaptive strategies for recalculating correlations and controlling the graph shrinking process. We apply our approach to three standard benchmark problems: Multidimensional Knapsack (MDKP), Maximum Independent Set (MIS), and the Quadratic Assignment Problem (QAP). Empirical results show that our approach improves solution feasibility, reduces repair complexity, and enhances quantum optimization quality on hardware-limited instances. These findings demonstrate a scalable pathway for applying near-term quantum algorithms to classically challenging constrained optimization problems.

Efficient deployment of Large Language Models (LLMs) requires batching multiple requests together to improve throughput. As the batch size, context length, or model size increases, the size of the key and value (KV) cache can quickly become the main contributor to GPU memory usage and the bottleneck of inference latency. Quantization has emerged as an effective technique for KV cache compression, but existing methods still fail at very low bit widths. We observe that distinct channels of a key/value activation embedding are highly inter-dependent, and the joint entropy of multiple channels grows at a slower rate than the sum of their marginal entropies. Based on this insight, we propose Coupled Quantization (CQ), which couples multiple key/value channels together to exploit their inter-dependency and encode the activations in a more information-efficient manner. Extensive experiments reveal that CQ outperforms or is competitive with existing baselines in preserving model quality. Furthermore, we demonstrate that CQ can preserve model quality with KV cache quantized down to 1-bit.

Transformers have revolutionized the machine learning landscape, gradually making their way into everyday tasks and equipping our computers with "sparks of intelligence". However, their runtime requirements have prevented them from being broadly deployed on mobile. As personal devices become increasingly powerful and prompt privacy becomes an ever more pressing issue, we explore the current state of mobile execution of Large Language Models (LLMs). To achieve this, we have created our own automation infrastructure, MELT, which supports the headless execution and benchmarking of LLMs on device, supporting different models, devices and frameworks, including Android, iOS and Nvidia Jetson devices. We evaluate popular instruction fine-tuned LLMs and leverage different frameworks to measure their end-to-end and granular performance, tracing their memory and energy requirements along the way. Our analysis is the first systematic study of on-device LLM execution, quantifying performance, energy efficiency and accuracy across various state-of-the-art models and showcases the state of on-device intelligence in the era of hyperscale models. Results highlight the performance heterogeneity across targets and corroborates that LLM inference is largely memory-bound. Quantization drastically reduces memory requirements and renders execution viable, but at a non-negligible accuracy cost. Drawing from its energy footprint and thermal behavior, the continuous execution of LLMs remains elusive, as both factors negatively affect user experience. Last, our experience shows that the ecosystem is still in its infancy, and algorithmic as well as hardware breakthroughs can significantly shift the execution cost. We expect NPU acceleration, and framework-hardware co-design to be the biggest bet towards efficient standalone execution, with the alternative of offloading tailored towards edge deployments.

Quantum algorithms, represented as quantum circuits, can be used as benchmarks for assessing the performance of quantum systems. Existing datasets, widely utilized in the field, suffer from limitations in size and versatility, leading researchers to employ randomly generated circuits. Random circuits are, however, not representative benchmarks as they lack the inherent properties of real quantum algorithms for which the quantum systems are manufactured. This shortage of `useful' quantum benchmarks poses a challenge to advancing the development and comparison of quantum compilers and hardware. This research aims to enhance the existing quantum circuit datasets by generating what we refer to as `realistic-looking' circuits by employing the Transformer machine learning architecture. For this purpose, we introduce KetGPT, a tool that generates synthetic circuits in OpenQASM language, whose structure is based on quantum circuits derived from existing quantum algorithms and follows the typical patterns of human-written algorithm-based code (e.g., order of gates and qubits). Our three-fold verification process, involving manual inspection and Qiskit framework execution, transformer-based classification, and structural analysis, demonstrates the efficacy of KetGPT in producing large amounts of additional circuits that closely align with algorithm-based structures. Beyond benchmarking, we envision KetGPT contributing substantially to AI-driven quantum compilers and systems.

Deploying vision-language models (VLMs) on mobile devices is challenging due to their significant memory and compute requirements. We present a framework for quantizing VLMs for efficient inference on resource-constrained hardware. Our approach combines a quantization pipeline that uses the model itself to generate training data and does not require access to the training setup, with a novel 2.7-bit-per-parameter format supporting efficient execution on Arm CPUs. We validate our approach by compressing the Llama 3.2 11B Vision Instruct model to 3.7 GB with 8-bit activations, preserving strong performance on a set of standard visual question answering tasks.

We present an overview of techniques for quantizing convolutional neural networks for inference with integer weights and activations. Per-channel quantization of weights and per-layer quantization of activations to 8-bits of precision post-training produces classification accuracies within 2% of floating point networks for a wide variety of CNN architectures. Model sizes can be reduced by a factor of 4 by quantizing weights to 8-bits, even when 8-bit arithmetic is not supported. This can be achieved with simple, post training quantization of weights.We benchmark latencies of quantized networks on CPUs and DSPs and observe a speedup of 2x-3x for quantized implementations compared to floating point on CPUs. Speedups of up to 10x are observed on specialized processors with fixed point SIMD capabilities, like the Qualcomm QDSPs with HVX. Quantization-aware training can provide further improvements, reducing the gap to floating point to 1% at 8-bit precision. Quantization-aware training also allows for reducing the precision of weights to four bits with accuracy losses ranging from 2% to 10%, with higher accuracy drop for smaller networks.We introduce tools in TensorFlow and TensorFlowLite for quantizing convolutional networks and review best practices for quantization-aware training to obtain high accuracy with quantized weights and activations. We recommend that per-channel quantization of weights and per-layer quantization of activations be the preferred quantization scheme for hardware acceleration and kernel optimization. We also propose that future processors and hardware accelerators for optimized inference support precisions of 4, 8 and 16 bits.

We present BenchRL-QAS, a unified benchmarking framework for reinforcement learning (RL) in quantum architecture search (QAS) across a spectrum of variational quantum algorithm tasks on 2- to 8-qubit systems. Our study systematically evaluates 9 different RL agents, including both value-based and policy-gradient methods, on quantum problems such as variational eigensolver, quantum state diagonalization, variational quantum classification (VQC), and state preparation, under both noiseless and noisy execution settings. To ensure fair comparison, we propose a weighted ranking metric that integrates accuracy, circuit depth, gate count, and training time. Results demonstrate that no single RL method dominates universally, the performance dependents on task type, qubit count, and noise conditions providing strong evidence of no free lunch principle in RL-QAS. As a byproduct we observe that a carefully chosen RL algorithm in RL-based VQC outperforms baseline VQCs. BenchRL-QAS establishes the most extensive benchmark for RL-based QAS to date, codes and experimental made publicly available for reproducibility and future advances.

To bridge the ever increasing gap between deep neural networks' complexity and hardware capability, network quantization has attracted more and more research attention. The latest trend of mixed precision quantization takes advantage of hardware's multiple bit-width arithmetic operations to unleash the full potential of network quantization. However, this also results in a difficult integer programming formulation, and forces most existing approaches to use an extremely time-consuming search process even with various relaxations. Instead of solving a problem of the original integer programming, we propose to optimize a proxy metric, the concept of network orthogonality, which is highly correlated with the loss of the integer programming but also easy to optimize with linear programming. This approach reduces the search time and required data amount by orders of magnitude, with little compromise on quantization accuracy. Specifically, we achieve 72.08% Top-1 accuracy on ResNet-18 with 6.7Mb, which does not require any searching iterations. Given the high efficiency and low data dependency of our algorithm, we used it for the post-training quantization, which achieve 71.27% Top-1 accuracy on MobileNetV2 with only 1.5Mb. Our code is available at https://github.com/MAC-AutoML/OMPQ.

LLM agents have recently emerged as a powerful paradigm for solving complex tasks through planning, tool use, memory retrieval, and multi-step interaction. However, these agentic workflows often introduce substantial input-side overhead, making the compute-intensive prefilling stage a key bottleneck in long-context, multi-turn inference. In this work, we propose Mix-Quant, a simple and effective phase-aware quantization framework for fast agentic inference. We first investigate FP4 quantization in agentic LLM workflows and observe that quantizing the entire inference process can incur significant performance degradation. In contrast, the prefilling stage exhibits substantial quantization redundancy and can therefore be quantized with minimal accuracy loss, despite being the dominant source of computation. Based on this insight, we apply high-throughput NVFP4 quantization to the prefilling phase while preserving BF16 precision for decoding. By decoupling prefilling acceleration from decoding quality, Mix-Quant combines phase-aware algorithmic quantization with hardware-efficient NVFP4 execution to alleviate the inference bottleneck in LLM agents. Extensive experiments across long-context and agentic benchmarks demonstrate that Mix-Quant largely preserves task performance while delivering significant efficiency improvements, achieving up to a 3x speedup during prefilling.

Weight quantization for large-language-model inference must balance adaptive reconstruction levels with representations regular enough for efficient GPU execution. Uniform integers constrain each group to a linear grid. Low-bit floating-point formats use a fixed exponent-mantissa structure, while learned codebooks gain flexibility at the cost of irregular decoding and additional metadata. We introduce CubicQuant, a parametric non-uniform scalar format that preserves a dense integer code stream while adapting reconstruction levels within each weight group. A monotonic cubic curve, specified by two shape parameters and one scale, maps uniformly spaced magnitude codes to non-uniform levels. The family spans 1-8-bit weight payloads, contains symmetric uniform integer quantization as an exact special case, and has effective width B + 64/G bits per weight for payload width B and group size G. We derive population distortion under Uniform, Gaussian, and Laplace distributions, formulate continuous and Dynamic-A8-carrier-aware fitting objectives, and describe direct packed-weight GPU execution. For finite groups of G=128 with 15,360 samples per distribution, W4 CubicQuant reduced reconstruction RMSE relative to optimally clipped four-bit uniform integer quantization by 3.90% on Uniform, 13.49% on Gaussian, and 28.14% on Laplace samples. Relative to the best enumerated four-bit finite floating-point format, the reductions were 3.90%, 9.44%, and 6.27%. Preliminary H200 kernel measurements show a workload-dependent crossover: model-dtype execution is faster for narrow GEMV, while Dynamic A8 becomes favorable as row count grows. The results establish the format's representational promise and direct executability; downstream model quality and cross-device end-to-end performance remain open evaluation questions.

Recursive reasoning models can solve complex structured tasks with only a few million parameters by repeatedly updating a latent state. Deploying these models on edge hardware requires significant compression, but unlike conventional sequence models, quantization errors compound across recursive reasoning cycles rather than across output tokens. As a result, standard intuitions about compression fail to apply. In this work, we ask what survives when recursive reasoners are compressed. Across a full precision sweep, three tasks, and two recursive architectures, we find that aggressive compression preserves local prediction but destroys global reasoning: cell accuracy holds while puzzle-exact accuracy collapses to zero under naive INT4 pruning, distillation, and linear attention alike. Token-level objectives, including quantization-aware training, cannot repair it. The collapse is architectural -- it strikes MLP-mixing recursion but not attention on the same task -- and we reverse it with per-channel calibrated INT4 without retraining. We also introduce carry-trajectory fidelity, the cosine similarity to the full-precision reasoning path, as a label-free signal that predicts this damage and its recovery before a task evaluation. The combined result is a deployment recipe: flash-streamed embeddings remove a 99.4MB bottleneck, INT8 at one cycle matches full-depth accuracy at 6x fewer FLOPs (8MB SoC), and calibrated INT4 fits a 4MB microcontroller.

With the development of Embodied Artificial intelligence, the end-to-end control policy such as Vision-Language-Action (VLA) model has become the mainstream. Existing VLA models faces expensive computing/storage cost, which need to be optimized. Quantization is considered as the most effective method which can not only reduce the memory cost but also achieve computation acceleration. However, we find the token alignment of VLA models hinders the application of existing quantization methods. To address this, we proposed an optimized framework called EaqVLA, which apply encoding-aligned quantization to VLA models. Specifically, we propose an complete analysis method to find the misalignment in various granularity. Based on the analysis results, we propose a mixed precision quantization with the awareness of encoding alignment. Experiments shows that the porposed EaqVLA achieves better quantization performance (with the minimal quantization loss for end-to-end action control and xxx times acceleration) than existing quantization methods.

This paper is dedicated to an efficient compression of weights and optimizer states (called checkpoints) obtained at different stages during a neural network training process. First, we propose a prediction-based compression approach, where values from the previously saved checkpoint are used for context modeling in arithmetic coding. Second, in order to enhance the compression performance, we also propose to apply pruning and quantization of the checkpoint values. Experimental results show that our approach achieves substantial bit size reduction, while enabling near-lossless training recovery from restored checkpoints, preserving the model's performance and making it suitable for storage-limited environments.

Vector Quantization (VQ) has emerged as a prominent weight compression technique, showcasing substantially lower quantization errors than uniform quantization across diverse models, particularly in extreme compression scenarios. However, its efficacy during fine-tuning is limited by the constraint of the compression format, where weight vectors assigned to the same codeword are restricted to updates in the same direction. Consequently, many quantized weights are compelled to move in directions contrary to their local gradient information. To mitigate this issue, we introduce a novel VQ paradigm, Sign-Splitting VQ (SSVQ), which decouples the sign bit of weights from the codebook. Our approach involves extracting the sign bits of uncompressed weights and performing clustering and compression on all-positive weights. We then introduce latent variables for the sign bit and jointly optimize both the signs and the codebook. Additionally, we implement a progressive freezing strategy for the learnable sign to ensure training stability. Extensive experiments on various modern models and tasks demonstrate that SSVQ achieves a significantly superior compression-accuracy trade-off compared to conventional VQ. Furthermore, we validate our algorithm on a hardware accelerator, showing that SSVQ achieves a 3times speedup over the 8-bit compressed model by reducing memory access. Our code is available at https://github.com/list0830/SSVQ.

We review thirteen generative systems and five supporting datasets for quantum circuit and quantum code generation, identified through a structured scoping review of Hugging Face, arXiv, and provenance tracing (January-February 2026). We organize the field along two axes: artifact type (Qiskit code, OpenQASM programs, circuit graphs); crossed with training regime (supervised fine-tuning, verifier-in-the-loop RL, diffusion/graph generation, agentic optimization); and systematically apply a three-layer evaluation framework covering syntactic validity, semantic correctness, and hardware executability. The central finding is that while all reviewed systems address syntax and most address semantics to some degree, none reports end-to-end evaluation on quantum hardware (Layer 3b), leaving a significant gap between generated circuits and practical deployment. Scope note: quantum code refers throughout to quantum program artifacts (QASM, Qiskit); we do not cover generation of quantum error-correcting codes (QEC).

Recent generative models have become increasingly powerful, but their inference cost continues to grow. Model quantization offers a promising way to compress these models and accelerate inference. However, at 4 bits, activation quantization is substantially more challenging than weight quantization. Recent post-training quantization (PTQ) and quantization-aware training (QAT) methods have made progress in 4-bit activation quantization by introducing smoothing, SVD branches, rotations, mixed precision, or advanced formats such as NVFP4. These additional operators and data types impose demanding requirements on inference engines and hardware, limiting the broad adoption of low-precision models. Can quantization be achieved using only plain low-bit operators? To answer this question, we propose JustQuant, a simple yet effective framework that moves the complexity of low-bit quantization from deployment-time operators into the training process. We first revisit model quantization from the perspective of knowledge distillation and show that a key reason existing PTQ and QAT methods fail is that they typically exploit supervision at only a single level. We then introduce Theseus QAD, a quantization-aware distillation method that progressively applies multi-level supervision, analogous to the gradual replacement process in the Ship of Theseus. Extensive experiments on DiT and diffusion large language models show two distinct regimes. For smaller models, Theseus QAD can serve as a lightweight warm-up stage that substantially improves subsequent QAT with plain operators, while naive QAD may collapse in the same setting. For larger models, Theseus QAD provides a stronger distillation training path than ordinary QAD. Across both regimes, JustQuant improves low-bit quantization quality while avoiding the complex operators required by many existing PTQ methods.

Quantization has become a crucial step for the efficient deployment of deep neural networks, where floating point operations are converted to simpler fixed point operations. In its most naive form, it simply consists in a combination of scaling and rounding transformations, leading to either a limited compression rate or a significant accuracy drop. Recently, Gradient-based post-training quantization (GPTQ) methods appears to be constitute a suitable trade-off between such simple methods and more powerful, yet expensive Quantization-Aware Training (QAT) approaches, particularly when attempting to quantize LLMs, where scalability of the quantization process is of paramount importance. GPTQ essentially consists in learning the rounding operation using a small calibration set. In this work, we challenge common choices in GPTQ methods. In particular, we show that the process is, to a certain extent, robust to a number of variables (weight selection, feature augmentation, choice of calibration set). More importantly, we derive a number of best practices for designing more efficient and scalable GPTQ methods, regarding the problem formulation (loss, degrees of freedom, use of non-uniform quantization schemes) or optimization process (choice of variable and optimizer). Lastly, we propose a novel importance-based mixed-precision technique. Those guidelines lead to significant performance improvements on all the tested state-of-the-art GPTQ methods and networks (e.g. +6.819 points on ViT for 4-bit quantization), paving the way for the design of scalable, yet effective quantization methods.

Mixture-of-Experts Large Language Models (MoE-LLMs) achieve strong performance but incur substantial memory overhead due to massive expert parameters. Mixed-precision quantization mitigates this cost by allocating expert-wise bit-widths based on their importance, approaching the accuracy-memory Pareto frontier and enabling extreme low-bit quantization. However, existing methods rely on layer-wise importance estimation and overlook router shifts induced by quantization, resulting in suboptimal allocation and routing. In this work, we propose Global Expert-level Mixed-precision Quantization (GEMQ) to overcome these limitations via (1) a global linear-programming formulation that captures model-wide expert importance based on quantization error analysis, and (2) efficient router fine-tuning to adapt routing to quantized experts. These components are integrated into a progressive quantization framework that iteratively refines importance estimation and allocation. Experiments demonstrate that GEMQ significantly reduces memory and accelerates inference with minimal accuracy degradation. Source code is available at https://github.com/jndeng/GEMQ .

Post-training quantization is often treated as a semantically neutral optimization for edge deployment of Large Language Models. When a full-precision source checkpoint is evaluated and quantization is applied downstream without equivalent re-evaluation, this workflow creates a structural validation--deployment gap: because quantization is a many-to-one mapping over parameter space, source-precision certification does not guarantee behavioral equivalence in the deployed configuration. We formalize this gap through Quantization Behavioral Equivalence Classes (QBECs) and prove that QBEC membership does not imply behavioral equivalence, providing a theoretical basis for quantization-triggered backdoor attacks. Building on a three-stage adversarial fine-tuning framework, we embed latent malicious payloads into models that satisfy the source-precision checks used in our evaluation, yet activate targeted adversarial behavior upon INT8 or 4-bit compression. We evaluate this threat in two operationally motivated scenarios, tactical machine translation and political content analysis, extending prior work from decoder-only causal LMs to multilingual encoder-decoder sequence-to-sequence models. Results show that backdoored translation models move from zero measured friend--foe corruption at repaired FP16 to up to 85.02% inversion after quantization, and that a paired stance classifier measures an ideological shift of up to ΔBias=0.33 upon compression. A cross-quantizer transferability analysis further shows that attack persistence varies across quantization schemes and model architectures, rather than being determined by nominal bit-width alone. These findings demonstrate that source-precision auditing alone does not rule out quantization-triggered behavior and that the final deployed configuration must be included in behavioral certification for trustworthy edge AI.

Despite the popularity of large language model (LLM) quantization for inference acceleration, significant uncertainty remains regarding the accuracy-performance trade-offs associated with various quantization formats. We present a comprehensive empirical study of quantized accuracy, evaluating popular quantization formats (FP8, INT8, INT4) across academic benchmarks and real-world tasks, on the entire Llama-3.1 model family. Additionally, our study examines the difference in text generated by quantized models versus their uncompressed counterparts. Beyond benchmarks, we also present a couple of quantization improvements which allowed us to obtain state-of-the-art accuracy recovery results. Our investigation, encompassing over 500,000 individual evaluations, yields several key findings: (1) FP8 weight and activation quantization (W8A8-FP) is lossless across all model scales, (2) INT8 weight and activation quantization (W8A8-INT), when properly tuned, incurs surprisingly low 1-3% accuracy degradation, and (3) INT4 weight-only quantization (W4A16-INT) is competitive with 8-bit integer weight and activation quantization. To address the question of the "best" format for a given deployment environment, we conduct inference performance analysis using the popular open-source vLLM framework on various GPU architectures. We find that W4A16 offers the best cost-efficiency for synchronous deployments, and for asynchronous deployment on mid-tier GPUs. At the same time, W8A8 formats excel in asynchronous "continuous batching" deployment of mid- and large-size models on high-end GPUs. Our results provide a set of practical guidelines for deploying quantized LLMs across scales and performance requirements.

One approach to reducing the massive costs of large language models (LLMs) is the use of quantized or sparse representations for training or deployment. While post-training compression methods are very popular, the question of obtaining even more accurate compressed models by directly training over such representations, i.e., Quantization-Aware Training (QAT), is still open: for example, a recent study (arXiv:2411.04330v2) put the "optimal" bit-width at which models can be trained using QAT, while staying accuracy-competitive with standard FP16/BF16 precision, at 8-bits weights and activations. We advance this state-of-the-art via a new method called QuEST, which is Pareto-competitive with FP16, i.e., it provides better accuracy at lower model size, while training models with weights and activations in 4-bits or less. Moreover, QuEST allows stable training with 1-bit weights and activations. QuEST achieves this by improving two key aspects of QAT methods: (1) accurate and fast quantization of the (continuous) distributions of weights and activations via Hadamard normalization and MSE-optimal fitting; (2) a new trust gradient estimator based on the idea of explicitly minimizing the error between the noisy gradient computed over quantized states and the "true" (but unknown) full-precision gradient. Experiments on Llama-type architectures show that QuEST induces stable scaling laws across the entire range of hardware-supported precisions, and can be extended to sparse representations. We provide GPU kernel support showing that models produced by QuEST can be executed efficiently. Our code is available at https://github.com/IST-DASLab/QuEST.

Large language models (LLMs) are increasingly utilized for complex tasks requiring longer context lengths, with some models supporting up to 128K or 1M tokens. This trend, however, presents significant challenges in inference speed and memory management. Quantization emerges as a promising approach to address the widening gap between LLM size and memory capacity. However, traditional quantization schemes often yield suboptimal compression results for KV caches due to two key factors: i) On-the-fly quantization and de-quantization, causing significant performance overhead; ii) Prevalence of outliers in KV values, challenging low-bitwidth uniform quantization. To this end, we propose MILLION, a novel quantization framework achieving low-bitwidth KV cache through product quantization. First, we conduct a thorough analysis of KV cache distribution, revealing the limitations of existing quantization schemes. Second, we introduce a non-uniform quantization algorithm based on product quantization, which efficiently compresses data while preserving accuracy. Third, we develop a high-performance GPU inference framework with efficient attention kernel and pipeline design for MILLION that leverages sparse computation and asynchronous quantization, significantly enhancing inference speed. Comprehensive evaluation results demonstrate that MILLION can achieve 4 bits quantization with trivial perplexity and accuracy loss, and achieve 2.09x end-to-end performance gains at 32K context length. Code is released at https://github.com/ZongwuWang/MILLION.

Existing low-bit Microscaling (MX) formats, such as MXFP4, often suffer from substantial accuracy degradation due to the use of a shared scaling factor with the Power-of-Two format. In this work, we explore strategies that introduce minimal metadata to recover accuracy lost during quantization while maintaining high bit efficiency across a wide range of large language models. We propose a complete algorithm-hardware co-design based on flexible metadata, featuring an online quantization with simple encoding. To support the proposed method efficiently, we implement a lightweight hardware unit and integrate it into the accelerator. Evaluation results demonstrate that our method substantially narrows the accuracy gap, achieving on average a 70.63% reduction in accuracy loss compared to MXFP4 and a 37.30% reduction relative to the latest NVFP4 on LLM benchmarks. Furthermore, our design delivers up to 1.91times speedup and 1.75times energy savings over state-of-the-art accelerators. Our code is available at https://github.com/SJTU-ReArch-Group/M2XFP_ASPLOS26.

We present accumulator-aware quantization (A2Q), a novel weight quantization method designed to train quantized neural networks (QNNs) to avoid overflow when using low-precision accumulators during inference. A2Q introduces a unique formulation inspired by weight normalization that constrains the L1-norm of model weights according to accumulator bit width bounds that we derive. Thus, in training QNNs for low-precision accumulation, A2Q also inherently promotes unstructured weight sparsity to guarantee overflow avoidance. We apply our method to deep learning-based computer vision tasks to show that A2Q can train QNNs for low-precision accumulators while maintaining model accuracy competitive with a floating-point baseline. In our evaluations, we consider the impact of A2Q on both general-purpose platforms and programmable hardware. However, we primarily target model deployment on FPGAs because they can be programmed to fully exploit custom accumulator bit widths. Our experimentation shows accumulator bit width significantly impacts the resource efficiency of FPGA-based accelerators. On average across our benchmarks, A2Q offers up to a 2.3x reduction in resource utilization over 32-bit accumulator counterparts with 99.2% of the floating-point model accuracy.

We analyse three KV cache quantization schemes under a fair bit budget: KV (scalar MSE baseline), KQV (WHT + MSE on K; WHT + MSE + QJL on V), and QKQV (WHT + MSE + QJL on both). Starting from the Beta distribution on the hypersphere, we trace how QJL on K inflates inner product variance by π/2, which softmax amplifies nonlinearly via Jensen's inequality, and we present statistical inference and information metrics to highlight practical differences. Three empirical findings emerge. (1)~At n=4 (the practically dominant budget), KQV wins on every measure -- KL divergence, geometric K error, and 6D distance -- across all distributions and ranks tested. (2)~The K--V asymmetry is unconditional: QKQV is consistently worse than KQV in KL divergence at every budget and distribution. (3)~A budget-dependent crossover exists: QKQV achieves better geometric K reconstruction at n in {2,3,5}, KQV at n in {4,6}, invariant to rank and tail weight -- an open rate-distortion problem. KL(p_{ref} | p_{quant}), K-only by construction, bridges K direction error to routing corruption and output collapse. We present a sufficient condition when the Jensen mechanism amplifies superlinearly through the softmax. At n in {2,3,5}, QKQV wins geometrically because this assumption does not bind. At n=4, elevated K error and KL divergence for QKQV strongly suggest the Jensen mechanism is the operative cause of the crossover, providing a new perspective and explanation.

The emergence of fine-grained numerical formats like NVFP4 presents new opportunities for efficient Large Language Model (LLM) inference. However, it is difficult to adapt existing Post-Training Quantization (PTQ) strategies to these formats: rotation-based methods compromise fine-grained block isolation; smoothing techniques struggle with significant 4-bit quantization errors; and mixed-precision approaches often conflict with hardware constraints on unified-precision computation. To address these challenges, we propose ARCQuant, a framework that boosts NVFP4 performance via Augmented Residual Channels. Distinct from methods that compromise block isolation or hardware uniformity, ARCQuant maintains a strictly unified NVFP4 format by augmenting the activation matrix with quantized residual channels. This design integrates the error compensation process directly into the matrix reduction dimension, enabling the use of standard, highly optimized GEMM kernels with minimal overhead. Theoretical analysis confirms that the worst-case error bound of our dual-stage NVFP4 quantization is comparable to that of standard 8-bit formats such as MXFP8. Extensive experiments on LLaMA and Qwen models demonstrate that ARCQuant achieves state-of-the-art accuracy, comparable to full-precision baselines in perplexity and downstream tasks. Furthermore, deployment on RTX 5090 and RTX PRO 6000 GPUs confirms practical benefits, achieving up to 3x speedup over FP16. Our code is available at https://github.com/actypedef/ARCQuant .

Quantization-aware training (QAT) is a leading technique for improving the accuracy of quantized neural networks. Previous work has shown that decomposing training into a full-precision (FP) phase followed by a QAT phase yields superior accuracy compared to QAT alone. However, the optimal allocation of compute between the FP and QAT phases remains unclear. We conduct extensive experiments with various compute budgets, QAT bit widths, and model sizes from 86.0M to 2.2B to investigate how different QAT durations impact final performance. We demonstrate that, contrary to previous findings, the loss-optimal ratio of QAT to FP training increases with the total amount of compute. Moreover, the optimal fraction can be accurately predicted for a wide range of model sizes and quantization widths using the tokens-per-parameter-byte statistic. From experimental data, we derive a loss scaling law that predicts both optimal QAT ratios and final model performance across different QAT/FP compute allocation strategies and QAT bit widths. We use the scaling law to make further predictions, which we verify experimentally, including which QAT bit width is optimal under a given memory constraint and how QAT accuracy with different bit widths compares to full-precision model accuracy. Additionally, we propose a novel cooldown and QAT fusion approach that performs learning rate decay jointly with quantization-aware training, eliminating redundant full-precision model updates and achieving significant compute savings. These findings provide practical insights into efficient QAT planning and enable the training of higher-quality quantized models with the same compute budget.

Quantization has become a popular technique to compress neural networks and reduce compute cost, but most prior work focuses on studying quantization without changing the network size. Many real-world applications of neural networks have compute cost and memory budgets, which can be traded off with model quality by changing the number of parameters. In this work, we use ResNet as a case study to systematically investigate the effects of quantization on inference compute cost-quality tradeoff curves. Our results suggest that for each bfloat16 ResNet model, there are quantized models with lower cost and higher accuracy; in other words, the bfloat16 compute cost-quality tradeoff curve is Pareto-dominated by the 4-bit and 8-bit curves, with models primarily quantized to 4-bit yielding the best Pareto curve. Furthermore, we achieve state-of-the-art results on ImageNet for 4-bit ResNet-50 with quantization-aware training, obtaining a top-1 eval accuracy of 77.09%. We demonstrate the regularizing effect of quantization by measuring the generalization gap. The quantization method we used is optimized for practicality: It requires little tuning and is designed with hardware capabilities in mind. Our work motivates further research into optimal numeric formats for quantization, as well as the development of machine learning accelerators supporting these formats. As part of this work, we contribute a quantization library written in JAX, which is open-sourced at https://github.com/google-research/google-research/tree/master/aqt.

Large language models (LLM) have achieved remarkable outcomes in addressing complex problems, including math, coding, and analyzing large amounts of scientific reports. Yet few works have explored the potential of LLM in quantum computing. The most challenging problem is how to leverage LLMs to automatically generate quantum circuits at a large scale. In this paper, we address such a challenge by fine-tuning LLMs and injecting the domain-specific knowledge of quantum computing. In particular, we investigate the mechanisms to generate training data sets and construct the end-to-end pipeline to fine-tune pre-trained LLMs that produce parameterized quantum circuits for optimization problems. We have prepared 14,000 quantum circuits covering a substantial part of the quantum optimization landscape: 12 optimization problem instances and their optimized QAOA, VQE, and adaptive VQE circuits. The fine-tuned LLMs can construct syntactically correct parametrized quantum circuits in the most recent OpenQASM 3.0. We have evaluated the quality of the parameters by comparing them to the optimized expectation values and distributions. Our evaluation shows that the fine-tuned LLM outperforms state-of-the-art models and that the parameters are better than random. The LLM-generated parametrized circuits and initial parameters can be used as a starting point for further optimization, e.g., templates in quantum machine learning and the benchmark for compilers and hardware.

Large Language Models (LLMs) have shown an impressive capability in code generation and, specifically, to automatically implement requirements described in natural language. The LLM effectiveness generally increases with its size: The higher the number of LLM's trainable parameters the better its ability to implement code. However, when it comes to deploying LLM-based code generators, larger LLMs pose significant challenges related to their memory (and, consequently, carbon) footprint. A previous work by Wei et al. proposed to leverage quantization techniques to reduce the memory footprint of LLM-based code generators without substantially degrading their effectiveness. In short, they studied LLMs featuring up to 16B parameters, quantizing their precision from floating point 32 bits down to int 8 bits and showing their limited impact on code generation performance. Given the fast pace at which LLM capabilities and quantization techniques are evolving, in this work we present a differentiated replication of the work by Wei et al. in which we consider (i) on the one side, more recent and larger code-related LLMs, of up to 34B parameters; (ii) the latest advancements in model quantization techniques, which allow pushing the compression to the extreme quantization level of 2 bits per model parameter and; (iii) different types of calibration datasets to guide the quantization process, including code-specific ones. Our empirical evaluation reveals that the new frontier for LLM quantization is 4-bit precision, resulting in an average memory footprint reduction of 70% compared to the original model without observing any significant decrease in performance. Additionally, when the quantization becomes even more extreme (3 and 2 bits), a code-specific calibration dataset helps to limit the loss of performance.

Large language models (LLMs) have achieved near-human performance across diverse reasoning tasks, yet their deployment on resource-constrained Internet-of-Things (IoT) devices remains impractical due to massive parameter footprints and memory-intensive autoregressive decoding. While split computing offers a promising solution by partitioning model execution between edge devices and cloud servers, existing approaches fail to address the unique challenges of autoregressive inference, particularly the iterative token generation process and expanding key-value (KV) cache requirements. This work introduces the first autoregressive-aware split computing framework designed explicitly for LLM deployment on edge devices. Our approach makes three key contributions. First, we develop one-point split compression (OPSC), a mixed-precision quantization scheme that prevents out-of-memory failures by strategically partitioning models into front-end and back-end segments with different precision levels. Second, we propose a two-stage intermediate compression pipeline that combines threshold splitting (TS) and token-wise adaptive bit quantization (TAB-Q) to preserve accuracy-critical activations while dramatically reducing communication overhead. Third, we formulate a unified optimization framework that jointly selects optimal split points, quantization settings, and sequence lengths to satisfy strict memory and latency constraints. Extensive evaluations across diverse LLMs and hardware platforms demonstrate superior performance compared to state-of-the-art quantization methods, including SmoothQuant, OmniQuant, and Atom. The framework achieves a 1.49 inference speedup and significant communication overhead reduction while maintaining or improving model accuracy.

Conventional model compression techniques for LLMs address high memory consumption and slow inference challenges but typically require computationally expensive retraining to preserve accuracy. In contrast, one-shot compression methods eliminate retraining cost, but struggle to achieve accuracy comparable to dense models. This paper presents SLIM, a new one-shot compression framework that holistically integrates hardware-friendly quantization, sparsity, and low-rank approximation into a unified process. First, we formulate the quantization process using a probabilistic approach (SLIM-Quant) that enables us to apply uniform quantization. Then, we use an existing one-shot pruning method to apply semi-structured sparsity on top of the quantized weights. Finally, to compensate for the introduced aggregated quantization and sparsity error, we use a novel saliency function with unique invertible and additive features that enables us to mathematically compute the value of low-rank adapters. SLIM improves model accuracy by up to 5.66% (LLaMA-2-7B) for 2:4 sparsity with 4-bit weight quantization, outperforming prior methods. Models compressed with SLIM achieve up to 4.3x and 3.8x on Nvidia RTX3060 and A100 GPUs, respectively. Additionally, they achieve up to 0.23x end-to-end memory reduction in comparison to their dense counterparts. We also propose an optional PEFT recipe that further improves accuracy by up to 1.66% (LLaMA-2-13B) compared to SLIM without fine-tuning.

While neural networks have been remarkably successful in a wide array of applications, implementing them in resource-constrained hardware remains an area of intense research. By replacing the weights of a neural network with quantized (e.g., 4-bit, or binary) counterparts, massive savings in computation cost, memory, and power consumption are attained. To that end, we generalize a post-training neural-network quantization method, GPFQ, that is based on a greedy path-following mechanism. Among other things, we propose modifications to promote sparsity of the weights, and rigorously analyze the associated error. Additionally, our error analysis expands the results of previous work on GPFQ to handle general quantization alphabets, showing that for quantizing a single-layer network, the relative square error essentially decays linearly in the number of weights -- i.e., level of over-parametrization. Our result holds across a range of input distributions and for both fully-connected and convolutional architectures thereby also extending previous results. To empirically evaluate the method, we quantize several common architectures with few bits per weight, and test them on ImageNet, showing only minor loss of accuracy compared to unquantized models. We also demonstrate that standard modifications, such as bias correction and mixed precision quantization, further improve accuracy.

Hypergraph partitioning is a central component of distributed quantum computing (DQC) compilers. However, due to the limited size of available quantum benchmark suites, many partitioning studies rely on random quantum circuits as evaluation workloads. In this work, we investigate whether such benchmarking practices provide a faithful assessment of partitioner performance. We evaluate a diverse set of state-of-the-art hypergraph partitioning strategies across three circuit origins: real algorithmic circuits, structured generated circuits, and fully random circuits. Our results show that random circuits significantly distort partitioning evaluation. They inflate cut costs, alter scaling trends across QPU counts and circuit sizes, and change the relative ranking of partitioning strategies. In contrast, structured generated circuits exhibit substantially lower distortion, more closely approximating real workload behaviour in cost, scaling, and strategy rankings. These findings demonstrate that benchmark selection directly influences methodological conclusions in DQC research and that random circuits may provide misleading guidance for compiler design.

Quantization-Aware Training (QAT) integrates quantization into the training loop, enabling LLMs to learn robust low-bit representations, and is widely recognized as one of the most promising research directions. All current QAT research focuses on minimizing quantization error on full-precision models, where the full-precision accuracy acts as an upper bound (accuracy ceiling). No existing method has even attempted to surpass this ceiling. To break this ceiling, we propose a new paradigm: raising the ceiling (full-precision model), and then still quantizing it efficiently into 2 bits. We propose Fairypm i, the first 2-bit quantization framework for complex-valued LLMs. Specifically, our method leverages the representational advantages of the complex domain to boost full-precision accuracy. We map weights to the fourth roots of unity {pm1, pm i}, forming a perfectly symmetric and information-theoretically optimal 2-bit representation. Importantly, each quantized weight has either a zero real or imaginary part, enabling multiplication-free inference using only additions and element swaps. Experimental results show that Fairypm i outperforms the ceiling of existing 2-bit quantization approaches in terms of both PPL and downstream tasks, while maintaining strict storage and compute efficiency. This work opens a new direction for building highly accurate and practical LLMs under extremely low-bit constraints.

Deploying neural networks on microcontroller units (MCUs) presents substantial challenges due to their constrained computation and memory resources. Previous researches have explored patch-based inference as a strategy to conserve memory without sacrificing model accuracy. However, this technique suffers from severe redundant computation overhead, leading to a substantial increase in execution latency. A feasible solution to address this issue is mixed-precision quantization, but it faces the challenges of accuracy degradation and a time-consuming search time. In this paper, we propose QuantMCU, a novel patch-based inference method that utilizes value-driven mixed-precision quantization to reduce redundant computation. We first utilize value-driven patch classification (VDPC) to maintain the model accuracy. VDPC classifies patches into two classes based on whether they contain outlier values. For patches containing outlier values, we apply 8-bit quantization to the feature maps on the dataflow branches that follow. In addition, for patches without outlier values, we utilize value-driven quantization search (VDQS) on the feature maps of their following dataflow branches to reduce search time. Specifically, VDQS introduces a novel quantization search metric that takes into account both computation and accuracy, and it employs entropy as an accuracy representation to avoid additional training. VDQS also adopts an iterative approach to determine the bitwidth of each feature map to further accelerate the search process. Experimental results on real-world MCU devices show that QuantMCU can reduce computation by 2.2x on average while maintaining comparable model accuracy compared to the state-of-the-art patch-based inference methods.

While neural networks have advanced the frontiers in many applications, they often come at a high computational cost. Reducing the power and latency of neural network inference is key if we want to integrate modern networks into edge devices with strict power and compute requirements. Neural network quantization is one of the most effective ways of achieving these savings but the additional noise it induces can lead to accuracy degradation. In this white paper, we introduce state-of-the-art algorithms for mitigating the impact of quantization noise on the network's performance while maintaining low-bit weights and activations. We start with a hardware motivated introduction to quantization and then consider two main classes of algorithms: Post-Training Quantization (PTQ) and Quantization-Aware-Training (QAT). PTQ requires no re-training or labelled data and is thus a lightweight push-button approach to quantization. In most cases, PTQ is sufficient for achieving 8-bit quantization with close to floating-point accuracy. QAT requires fine-tuning and access to labeled training data but enables lower bit quantization with competitive results. For both solutions, we provide tested pipelines based on existing literature and extensive experimentation that lead to state-of-the-art performance for common deep learning models and tasks.

Quantization has been widely adopted in LLM training and inference to reduce cost and improve efficiency. However, low-bit quantization of the attention module often introduces large errors at very low bit-widths, causing performance degradation. Existing methods mainly rely on smoothing techniques to handle outliers, while we propose a hybrid quantization design to better balance accuracy and efficiency. Specifically, we propose HyQuant, an efficient hybrid quantization framework for LLM attention. HyQuant quantizes most attention states into low-bit formats while retaining a small set of vertical-line tokens and local-window states in high precision. These accuracy-critical regions are selected using lightweight vertical-line-aware attention-pattern signals, reducing quantization error with limited overhead. In the Prefill stage, HyQuant uses a hybrid-precision quantized attention operator that preserves vertical-line tokens and a local sliding window in full precision while quantizing the remaining context. In the Decode stage, HyQuant applies the same principle to KV-cache compression and fuses KV dequantization with attention computation to improve memory and hardware efficiency. Across diverse tasks, models, and datasets, HyQuant maintains nearly lossless accuracy with an extremely simple design, demonstrating the efficiency and practical feasibility of hybrid quantization for LLM attention. Code is available at: https://github.com/jerrysfls/HyQuant .

Quantum programs are typically developed using quantum Software Development Kits (SDKs). The rapid advancement of quantum computing necessitates new tools to streamline this development process, and one such tool could be Generative Artificial intelligence (GenAI). In this study, we introduce and use the Qiskit HumanEval dataset, a hand-curated collection of tasks designed to benchmark the ability of Large Language Models (LLMs) to produce quantum code using Qiskit - a quantum SDK. This dataset consists of more than 100 quantum computing tasks, each accompanied by a prompt, a canonical solution, a comprehensive test case, and a difficulty scale to evaluate the correctness of the generated solutions. We systematically assess the performance of a set of LLMs against the Qiskit HumanEval dataset's tasks and focus on the models ability in producing executable quantum code. Our findings not only demonstrate the feasibility of using LLMs for generating quantum code but also establish a new benchmark for ongoing advancements in the field and encourage further exploration and development of GenAI-driven tools for quantum code generation.

Speculative decoding and quantization effectively accelerate memory-bound inference of large language models. Speculative decoding mitigates the memory bandwidth bottleneck by verifying multiple tokens within a single forward pass, which increases computational effort. Quantization achieves this optimization by compressing weights and activations into lower bit-widths and also reduces computations via low-bit matrix multiplications. To further leverage their strengths, we investigate the integration of these two techniques. Surprisingly, experiments applying the advanced speculative decoding method EAGLE-2 to various quantized models reveal that the memory benefits from 4-bit weight quantization are diminished by the computational load from speculative decoding. Specifically, verifying a tree-style draft incurs significantly more time overhead than a single-token forward pass on 4-bit weight quantized models. This finding led to our new speculative decoding design: a hierarchical framework that employs a small model as an intermediate stage to turn tree-style drafts into sequence drafts, leveraging the memory access benefits of the target quantized model. Experimental results show that our hierarchical approach achieves a 2.78times speedup across various tasks for the 4-bit weight Llama-3-70B model on an A100 GPU, outperforming EAGLE-2 by 1.31times. Code available at https://github.com/AI9Stars/SpecMQuant.

Prior research works have evaluated quantized LLMs using limited metrics such as perplexity or a few basic knowledge tasks and old datasets. Additionally, recent large-scale models such as Llama 3.1 with up to 405B have not been thoroughly examined. This paper evaluates the performance of instruction-tuned LLMs across various quantization methods (GPTQ, AWQ, SmoothQuant, and FP8) on models ranging from 7B to 405B. Using 13 benchmarks, we assess performance across six task types: commonsense Q\&A, knowledge and language understanding, instruction following, hallucination detection, mathematics, and dialogue. Our key findings reveal that (1) quantizing a larger LLM to a similar size as a smaller FP16 LLM generally performs better across most benchmarks, except for hallucination detection and instruction following; (2) performance varies significantly with different quantization methods, model size, and bit-width, with weight-only methods often yielding better results in larger models; (3) task difficulty does not significantly impact accuracy degradation due to quantization; and (4) the MT-Bench evaluation method has limited discriminatory power among recent high-performing LLMs.

Post-training compression reduces the computational and memory costs of large language models (LLMs), enabling resource-efficient deployment. However, existing compression benchmarks only focus on language modeling (e.g., perplexity) and natural language understanding tasks (e.g., GLUE accuracy), ignoring the agentic capabilities - workflow, tool use/function call, long-context understanding and real-world application. We introduce the Agent Compression Benchmark (ACBench), the first comprehensive benchmark for evaluating how compression impacts LLMs' agentic abilities. ACBench spans (1) 12 tasks across 4 capabilities (e.g., WorfBench for workflow generation, Needle-in-Haystack for long-context retrieval), (2) quantization (GPTQ, AWQ) and pruning (Wanda, SparseGPT), and (3) 15 models, including small (Gemma-2B), standard (Qwen2.5 7B-32B), and distilled reasoning LLMs (DeepSeek-R1-Distill). Our experiments reveal compression tradeoffs: 4-bit quantization preserves workflow generation and tool use (1%-3% drop) but degrades real-world application accuracy by 10%-15%. We introduce ERank, Top-k Ranking Correlation and Energy to systematize analysis. ACBench provides actionable insights for optimizing LLM compression in agentic scenarios. The code can be found in https://github.com/pprp/ACBench.

The key-value (KV) cache dominates memory bandwidth and footprint in long-context autoregressive inference. Recent rotation-preconditioned codecs (TurboQuant, PolarQuant) show that a structured random rotation followed by a per-coordinate scalar quantizer matched to an analytically tractable marginal is a near-optimal recipe for KV compression. OCTOPUS advances this paradigm through joint quantization of rotated coordinate triplets. Each triplet's direction is mapped to a square via an octahedral parameterization, and the two resulting coordinates and the triplet norm are Lloyd-Max quantized against implementation-matched marginals. Optimizing the per-triplet squared error gives a strictly non-uniform bit allocation depending only on the total dimensionality of the keys. We find the finite-dimensional quality optimum with sweeps to be constant on every real decoder we test. The codec is data-oblivious, online, and deterministic given a seed. Across text, video, and audio, OCTOPUS matches or beats every prior rotation codec at every reported bit width and metric, with a lead that grows as bits drop for extreme compression. Furthermore, a fused Triton implementation reconstructs keys on the fly without materializing the uncompressed key, so the codec adds no decode-time bandwidth or latency over the existing dequantization. Project Page: https://octopus-quant.github.io/

Low-resolution quantized imagery, such as pixel art, is seeing a revival in modern applications ranging from video game graphics to digital design and fabrication, where creativity is often bound by a limited palette of elemental units. Despite their growing popularity, the automated generation of quantized images from raw inputs remains a significant challenge, often necessitating intensive manual input. We introduce SD-πXL, an approach for producing quantized images that employs score distillation sampling in conjunction with a differentiable image generator. Our method enables users to input a prompt and optionally an image for spatial conditioning, set any desired output size H times W, and choose a palette of n colors or elements. Each color corresponds to a distinct class for our generator, which operates on an H times W times n tensor. We adopt a softmax approach, computing a convex sum of elements, thus rendering the process differentiable and amenable to backpropagation. We show that employing Gumbel-softmax reparameterization allows for crisp pixel art effects. Unique to our method is the ability to transform input images into low-resolution, quantized versions while retaining their key semantic features. Our experiments validate SD-πXL's performance in creating visually pleasing and faithful representations, consistently outperforming the current state-of-the-art. Furthermore, we showcase SD-πXL's practical utility in fabrication through its applications in interlocking brick mosaic, beading and embroidery design.

Quantization is an effective technique to reduce the deployment cost of large language models (LLMs), and post-training quantization (PTQ) has been widely studied due to its efficiency. However, existing PTQ methods are limited by their inability to fine-tune model parameters and often suffer significant accuracy loss in low-bit scenarios. Quantization-aware training (QAT) provides a more principled solution, but its reliance on backpropagation incurs prohibitive memory costs, limiting its practicality for LLM deployment. To address these challenges, we propose ZeroQAT, a zeroth-order optimization-based QAT framework that supports both weight and activation quantization. ZeroQAT leverages forward-only gradient estimation to eliminate backpropagation, substantially reducing computational and memory overhead while retaining the benefits of end-to-end optimization. We further introduce a lightweight variant of ZeroQAT for quantized fine-tuning, which freezes and pre-quantizes most parameters to further cut memory usage. Experiments show that ZeroQAT consistently outperforms representative PTQ and QAT baselines while requiring significantly less memory. For example, ZeroQAT enables fine-tuning of a 13B model at extremely low bit-widths (e.g., 2-4 bits) on a single 8GB GPU, and even allows fine-tuning a 6.7B model on a OnePlus 12 smartphone, demonstrating its practicality for end-to-end QAT on resource-limited edge devices.

Quantization has become one of the most effective methodologies to compress LLMs into smaller size. However, the existing quantization solutions still show limitations of either non-negligible accuracy drop or system inefficiency. In this paper, we make a comprehensive analysis of the general quantization principles on their effect to the triangle of accuracy, memory consumption and system efficiency. We propose MixLLM that explores the new optimization space of mixed-precision quantization between output features based on the insight that different output features matter differently in the model. MixLLM identifies the output features with high salience in the global view rather than within each single layer, effectively assigning the larger bit-width to output features that need it most to achieve good accuracy with low memory consumption. We present the sweet spot of quantization configuration of algorithm-system co-design that leads to high accuracy and system efficiency. To address the system challenge, we design the two-step dequantization to make use of the int8 Tensor Core easily and fast data type conversion to reduce dequantization overhead significantly, and present the software pipeline to overlap the memory access, dequantization and the MatMul to the best. Extensive experiments show that with only 10% more bits, the PPL increasement can be reduced from about 0.5 in SOTA to within 0.2 for Llama 3.1 70B, while on average MMLU-Pro improves by 0.93 over the SOTA of three popular models. In addition to its superior accuracy, MixLLM also achieves state-of-the-art system efficiency.

Model quantification uses low bit-width values to represent the weight matrices of models, which is a promising approach to reduce both storage and computational overheads of deploying highly anticipated LLMs. However, existing quantization methods suffer severe performance degradation when the bit-width is extremely reduced, and thus focus on utilizing 4-bit or 8-bit values to quantize models. This paper boldly quantizes the weight matrices of LLMs to 1-bit, paving the way for the extremely low bit-width deployment of LLMs. For this target, we introduce a 1-bit quantization-aware training (QAT) framework named OneBit, including a novel 1-bit parameter representation method to better quantize LLMs as well as an effective parameter initialization method based on matrix decomposition to improve the convergence speed of the QAT framework. Sufficient experimental results indicate that OneBit achieves good performance (at least 83% of the non-quantized performance) with robust training processes when only using 1-bit weight matrices.

This report describes our approach to the Efficient Qwen Competition, where the goal is to enable low-latency serving of Qwen3.5-4B on a resource-constrained NVIDIA A10G GPU. Our system combines a quantized target model with speculative decoding. To recover accuracy, we apply quantization-aware distillation to the target model while retaining the original quantization grid. To speed up decoding, a block-diffusion drafter specialized for the quantized target model is trained using a two-stage procedure: first learning from the high-precision target and then adapting to the low-precision target. Because the drafter is invoked at every speculative decoding step, we further reduce its overhead with quantization and sliding-window attention, preserving draft-token acceptance while improving long-context decoding latency. As a result, our submission achieves a 6.978times average speedup over the baseline while satisfying the required quality thresholds, ranking 3rd overall. We hope these results provide useful insights for practical LLM inference. The code and resources are available at https://github.com/nota-github/adaptfm-quant-dflash

Quantization emerges as one of the most promising compression technologies for deploying efficient large models for various real time application in recent years. Considering that the storage and IO of weights take up the vast majority of the overhead inside a large model, weight only quantization can lead to large gains. However, existing quantization schemes suffer from significant accuracy degradation at very low bits, or require some additional computational overhead when deployed, making it difficult to be applied to large-scale applications in industry. In this paper, we propose decoupleQ, achieving a substantial increase in model accuracy, especially at very low bits. decoupleQ abandons the traditional heuristic quantization paradigm and decouples the model parameters into integer and floating-point parts, thus transforming the quantization problem into a traditional mathematical optimization problem with constraints, which is then solved alternatively by off-the-shelf optimization methods. Quantization via decoupleQ is linear and uniform, making it hardware-friendlier than non-uniform counterpart, and enabling the idea to be migrated to high-bit quantization to enhance its robustness. Our method has achieved well on-line accuracy near fp16/bf16 on the 2-bit quantization of large speech models in ByteDance. The code is available at https://github.com/bytedance/decoupleQ

Increasing the number of parameters in large language models (LLMs) usually improves performance in downstream tasks but raises compute and memory costs, making deployment difficult in resource-limited settings. Quantization techniques, which reduce the bits needed for model weights or activations with minimal performance loss, have become popular due to the rise of LLMs. However, most quantization studies use pre-trained LLMs, and the impact of quantization on instruction-tuned LLMs and the relationship between perplexity and benchmark performance of quantized LLMs are not well understood. Evaluation of quantized LLMs is often limited to language modeling and a few classification tasks, leaving their performance on other benchmarks unclear. To address these gaps, we propose a structured evaluation framework consisting of three critical dimensions: (1) knowledge \& capacity, (2) alignment, and (3) efficiency, and conduct extensive experiments across ten diverse benchmarks. Our experimental results indicate that LLMs with 4-bit quantization can retain performance comparable to their non-quantized counterparts, and perplexity can serve as a proxy metric for quantized LLMs on most benchmarks. Furthermore, quantized LLMs with larger parameter scales can outperform smaller LLMs. Despite the memory savings achieved through quantization, it can also slow down the inference speed of LLMs. Consequently, substantial engineering efforts and hardware support are imperative to achieve a balanced optimization of decoding speed and memory consumption in the context of quantized LLMs.

Quantization of Deep Neural Network (DNN) activations is a commonly used technique to reduce compute and memory demands during DNN inference, which can be particularly beneficial on resource-constrained devices. To achieve high accuracy, existing methods for quantizing activations rely on complex mathematical computations or perform extensive searches for the best hyper-parameters. However, these expensive operations are impractical on devices with limited computation capabilities, memory capacities, and energy budgets. Furthermore, many existing methods do not focus on sub-6-bit (or deep) quantization. To fill these gaps, in this paper we propose DQA (Deep Quantization of DNN Activations), a new method that focuses on sub-6-bit quantization of activations and leverages simple shifting-based operations and Huffman coding to be efficient and achieve high accuracy. We evaluate DQA with 3, 4, and 5-bit quantization levels and three different DNN models for two different tasks, image classification and image segmentation, on two different datasets. DQA shows significantly better accuracy (up to 29.28%) compared to the direct quantization method and the state-of-the-art NoisyQuant for sub-6-bit quantization.

As quantum computing transitions from theoretical physics to engineering applications, there is a growing need for accessible simulation tools that bridge the gap between abstract linear algebra and practical implementation. While text-based frameworks (like Qiskit or Cirq) are standard, they often present a steep learning curve for students and engineers accustomed to graphical system design. This paper introduces QuVI (Quantum Virtual Instrument), an open-source quantum circuit toolkit developed natively within the NI LabVIEW environment. Moving beyond initial proof-of-concept models, QuVI establishes a robust framework that leverages LabVIEW's "dataflow" paradigm, in which wires represent data and nodes represent operations, to provide an intuitive, visual analog to standard quantum circuit notation while enabling the seamless integration of classical control structures like loops and conditionals. The toolkit's capabilities are demonstrated by constructing and visualizing fundamental quantum algorithms and verifying results against theoretical predictions. By translating "Block Diagrams" directly into quantum state evolutions ("Bloch Spheres"), QuVI offers educators and researchers a powerful platform for prototyping quantum logic without leaving the graphical engineering workspace.

With the increasing size of frontier LLMs, post-training quantization has become the standard for memory-efficient deployment. Recent work has shown that basic rounding-based quantization schemes pose security risks, as they can be exploited to inject malicious behaviors into quantized models that remain hidden in full precision. However, existing attacks cannot be applied to more complex quantization methods, such as the GGUF family used in the popular ollama and llama.cpp frameworks. In this work, we address this gap by introducing the first attack on GGUF. Our key insight is that the quantization error -- the difference between the full-precision weights and their (de-)quantized version -- provides sufficient flexibility to construct malicious quantized models that appear benign in full precision. Leveraging this, we develop an attack that trains the target malicious LLM while constraining its weights based on quantization errors. We demonstrate the effectiveness of our attack on three popular LLMs across nine GGUF quantization data types on three diverse attack scenarios: insecure code generation (Delta=88.7%), targeted content injection (Delta=85.0%), and benign instruction refusal (Delta=30.1%). Our attack highlights that (1) the most widely used post-training quantization method is susceptible to adversarial interferences, and (2) the complexity of quantization schemes alone is insufficient as a defense.

The performance of multi-turn, agentic LLM inference is increasingly dominated by KV-Cache storage I/O rather than computation. In prevalent disaggregated architectures, loading the massive KV-Cache from external storage creates a fundamental imbalance: storage NICs on prefill engines become bandwidth-saturated, while those on decoding engines remain idle. This asymmetry severely constrains overall system throughput. We present DualPath, an inference system that breaks this bottleneck by introducing dual-path KV-Cache loading. Beyond the traditional storage-to-prefill path, DualPath enables a novel storage-to-decode path, in which the KV-Cache is loaded into decoding engines and then efficiently transferred to prefill engines via RDMA over the compute network. DualPath combines this optimized data path -- which inherently avoids network congestion and avoids interference with latency-critical model execution communications -- with a global scheduler that dynamically balances load across prefill and decode engines. Our evaluation on three models with production agentic workloads demonstrates that DualPath improves offline inference throughput by up to 1.87times on our in-house inference system. It can also improve online serving throughput by an average factor of 1.96times without violating SLO.

Quantum optimization holds promise for addressing classically intractable combinatorial problems, yet a standardized framework for benchmarking its performance, particularly in terms of solution quality, computational speed, and scalability is still lacking. In this work, we introduce a comprehensive benchmarking framework designed to systematically evaluate a range of quantum optimization techniques against well-established NP-hard combinatorial problems. Our framework focuses on key problem classes, including the Multi-Dimensional Knapsack Problem (MDKP), Maximum Independent Set (MIS), Quadratic Assignment Problem (QAP), and Market Share Problem (MSP). Our study evaluates gate-based quantum approaches, including the Variational Quantum Eigensolver (VQE) and its CVaR-enhanced variant, alongside advanced quantum algorithms such as the Quantum Approximate Optimization Algorithm (QAOA) and its extensions. To address resource constraints, we incorporate qubit compression techniques like Pauli Correlation Encoding (PCE) and Quantum Random Access Optimization (QRAO). Experimental results, obtained from simulated quantum environments and classical solvers, provide key insights into feasibility, optimality gaps, and scalability. Our findings highlight both the promise and current limitations of quantum optimization, offering a structured pathway for future research and practical applications in quantum-enhanced decision-making.

Despite the remarkable strides of Large Language Models (LLMs) in various fields, the wide applications of LLMs on edge devices are limited due to their massive parameters and computations. To address this, quantization is commonly adopted to generate lightweight LLMs with efficient computations and fast inference. However, Post-Training Quantization (PTQ) methods dramatically degrade in quality when quantizing weights, activations, and KV cache together to below 8 bits. Besides, many Quantization-Aware Training (QAT) works quantize model weights, leaving the activations untouched, which do not fully exploit the potential of quantization for inference acceleration on the edge. In this paper, we propose EdgeQAT, the Entropy and Distribution Guided QAT for the optimization of lightweight LLMs to achieve inference acceleration on Edge devices. We first identify that the performance drop of quantization primarily stems from the information distortion in quantized attention maps, demonstrated by the different distributions in quantized query and key of the self-attention mechanism. Then, the entropy and distribution guided QAT is proposed to mitigate the information distortion. Moreover, we design a token importance-aware adaptive method to dynamically quantize the tokens with different bit widths for further optimization and acceleration. Our extensive experiments verify the substantial improvements with our framework across various datasets. Furthermore, we achieve an on-device speedup of up to 2.37x compared with its FP16 counterparts across multiple edge devices, signaling a groundbreaking advancement.

We introduce Stable Code, the first in our new-generation of code language models series, which serves as a general-purpose base code language model targeting code completion, reasoning, math, and other software engineering-based tasks. Additionally, we introduce an instruction variant named Stable Code Instruct that allows conversing with the model in a natural chat interface for performing question-answering and instruction-based tasks. In this technical report, we detail the data and training procedure leading to both models. Their weights are available via Hugging Face for anyone to download and use at https://huggingface.co/stabilityai/stable-code-3b and https://huggingface.co/stabilityai/stable-code-instruct-3b. This report contains thorough evaluations of the models, including multilingual programming benchmarks, and the MT benchmark focusing on multi-turn dialogues. At the time of its release, Stable Code is the state-of-the-art open model under 3B parameters and even performs comparably to larger models of sizes 7 billion and 15 billion parameters on the popular Multi-PL benchmark. Stable Code Instruct also exhibits state-of-the-art performance on the MT-Bench coding tasks and on Multi-PL completion compared to other instruction tuned models. Given its appealing small size, we also provide throughput measurements on a number of edge devices. In addition, we open source several quantized checkpoints and provide their performance metrics compared to the original model.

Deep neural network (DNN) deployment has been confined to larger hardware devices due to their expensive computational requirements. This challenge has recently reached another scale with the emergence of large language models (LLMs). In order to reduce both their memory footprint and latency, a promising technique is quantization. It consists in converting floating point representations to low bit-width fixed point representations, usually by assuming a uniform mapping onto a regular grid. This process, referred to in the literature as uniform quantization, may however be ill-suited as most DNN weights and activations follow a bell-shaped distribution. This is even worse on LLMs whose weight distributions are known to exhibit large, high impact, outlier values. In this work, we propose an improvement over the most commonly adopted way to tackle this limitation in deep learning models quantization, namely, non-uniform quantization. NUPES leverages automorphisms to preserve the scalar multiplications. Such transformations are derived from power functions. However, the optimization of the exponent parameter and weight values remains a challenging and novel problem which could not be solved with previous post training optimization techniques which only learn to round up or down weight values in order to preserve the predictive function. We circumvent this limitation with a new paradigm: learning new quantized weights over the entire quantized space. Similarly, we enable the optimization of the power exponent, i.e. the optimization of the quantization operator itself during training by alleviating all the numerical instabilities. The resulting predictive function is compatible with integer-only low-bit inference. We show the ability of the method to achieve state-of-the-art compression rates in both, data-free and data-driven configurations.

LLM-agent services repeatedly execute small deterministic transitions between model and tool calls: route an outcome, update state, and emit the next effect. We ask when this control path exposes enough concurrent work for GPU execution, and what changes when a GPU-computed route decision remains on device. We formalize the ready-cohort boundary using fixed-partition share F, exact offline share P*, local upper bound U, and online achieved share A. Under zero service time, unlimited capacity, and equal relative launch deadlines, a specialized dynamic program computes P* exactly. In a stationary Poisson replay of one pinned 851-session public trace panel, the primary condition at 100,000 target active sessions, K=256, and a 50 ms launch deadline gives F=30.19%, P*=43.00%, and U=45.85%. Exact packing recovers 81.83% of the opportunity lost at fixed window boundaries. The outcome-derived route key is a conditioning proxy, not proof of executable identity. A separate mechanism study keeps a GPU-computed binary decision on device instead of returning four bytes to the host and redispatching. Across four named GPU placements, the device-resident path is faster in all 36 configurations; within-placement row-median ratios range from 1.19x to 2.39x. Across both admissible mechanisms, all 14,557,440 tested batched invocations match a separately implemented host oracle. A fixed nested device graph that removes no host decision is slower in all 60 configurations across five placements. Together, the studies establish two measurable gates for GPU agent control: deadline-feasible cohort supply and observation placement. A joined finite online runtime is required to measure A, CPU displacement, and service-level benefit.

Quantized neural networks can be viewed as a chain of noisy channels, where rounding in each layer reduces capacity as bit-width shrinks; the floating-point (FP) checkpoint sets the maximum input rate. We track capacity dynamics as the average bit-width decreases and identify resulting quantization bottlenecks by casting fine-tuning as a smooth, constrained optimization problem. Our approach employs a fully differentiable Straight-Through Estimator (STE) with learnable bit-width, noise scale and clamp bounds, and enforces a target bit-width via an exterior-point penalty; mild metric smoothing (via distillation) stabilizes training. Despite its simplicity, the method attains competitive accuracy down to the extreme W1A1 setting while retaining the efficiency of STE.

Quantization is a technique for reducing deep neural networks (DNNs) training and inference times, which is crucial for training in resource constrained environments or applications where inference is time critical. State-of-the-art (SOTA) quantization approaches focus on post-training quantization, i.e., quantization of pre-trained DNNs for speeding up inference. While work on quantized training exists, most approaches require refinement in full precision (usually single precision) in the final training phase or enforce a global word length across the entire DNN. This leads to suboptimal assignments of bit-widths to layers and, consequently, suboptimal resource usage. In an attempt to overcome such limitations, we introduce AdaPT, a new fixed-point quantized sparsifying training strategy. AdaPT decides about precision switches between training epochs based on information theoretic conditions. The goal is to determine on a per-layer basis the lowest precision that causes no quantization-induced information loss while keeping the precision high enough such that future learning steps do not suffer from vanishing gradients. The benefits of the resulting fully quantized DNN are evaluated based on an analytical performance model which we develop. We illustrate that an average speedup of 1.27 compared to standard training in float32 with an average accuracy increase of 0.98% can be achieved for AlexNet/ResNet on CIFAR10/100 and we further demonstrate these AdaPT trained models achieve an average inference speedup of 2.33 with a model size reduction of 0.52.

Hybrid LLMs pair softmax attention with linear-attention layers such as Gated DeltaNet (GDN), whose recurrent state summarizes the context in fixed size. Early community 4-bit quantizations of Qwen3.8-27B (48 GDN layers, 16 attention layers) left the GDN block in 8- or 16-bit precision -- especially its decay and write-strength gates -- on the intuition that errors in a recurrence accumulate over long contexts. We test that intuition by building Minima: NVFP4 W4A4 on all 496 linear layers, GDN included. Across perplexity at 4K/32K, MMLU-Pro, GSM8K, AIME'25, GPQA-Diamond, LiveCodeBench, and RULER retrieval to 64K, Minima matches BF16 within seed noise (5-task average -0.52) while being the smallest (17.5 GiB) and fastest-prefill (+14-19%) recipe we compare, and its 32K perplexity gap shrinks with position. A four-part mechanism study explains why: (i) NVFP4's 16-element block scaling localizes the residual stream's extreme outliers, equalizing activation error across layer roles; (ii) the supposedly fragile gate projections are the least sensitive -- softplus/exponential and sigmoid parameterizations compress ~11% GEMM error to ~2% output error; (iii) the delta-rule recurrence holds injected noise at a flat plateau over 32K tokens and forgets a state impulse within hundreds of steps, because each write overwrites the state along the current key direction; (iv) the per-token quantization cost washes out with context instead of compounding. We also repair a global-scale mismatch that arises when per-module-calibrated NVFP4 checkpoints are served by kernels that fuse those modules into one GEMM, and show calibrated FP8 KV-cache scales are performance-free. The result: a practical recipe -- quantize everything, ship KV scales -- and a mechanistic account of why the recurrent half of a hybrid LLM is the easy half to quantize. Checkpoint: https://huggingface.co/minima-ai/mnma_qwen3.8_27b_nvfp4

Diffusion models have achieved remarkable success in image generation tasks, yet their practical deployment is restrained by the high memory and time consumption. While quantization paves a way for diffusion model compression and acceleration, existing methods totally fail when the models are quantized to low-bits. In this paper, we unravel three properties in quantized diffusion models that compromise the efficacy of current methods: imbalanced activation distributions, imprecise temporal information, and vulnerability to perturbations of specific modules. To alleviate the intensified low-bit quantization difficulty stemming from the distribution imbalance, we propose finetuning the quantized model to better adapt to the activation distribution. Building on this idea, we identify two critical types of quantized layers: those holding vital temporal information and those sensitive to reduced bit-width, and finetune them to mitigate performance degradation with efficiency. We empirically verify that our approach modifies the activation distribution and provides meaningful temporal information, facilitating easier and more accurate quantization. Our method is evaluated over three high-resolution image generation tasks and achieves state-of-the-art performance under various bit-width settings, as well as being the first method to generate readable images on full 4-bit (i.e. W4A4) Stable Diffusion. Code is been made publicly available.

There is a constant need for high-performing and computationally efficient neural network models for image super-resolution: computationally efficient models can be used via low-capacity devices and reduce carbon footprints. One way to obtain such models is to compress models, e.g. quantization. Another way is a neural architecture search that automatically discovers new, more efficient solutions. We propose a novel quantization-aware procedure, the QuantNAS that combines pros of these two approaches. To make QuantNAS work, the procedure looks for quantization-friendly super-resolution models. The approach utilizes entropy regularization, quantization noise, and Adaptive Deviation for Quantization (ADQ) module to enhance the search procedure. The entropy regularization technique prioritizes a single operation within each block of the search space. Adding quantization noise to parameters and activations approximates model degradation after quantization, resulting in a more quantization-friendly architectures. ADQ helps to alleviate problems caused by Batch Norm blocks in super-resolution models. Our experimental results show that the proposed approximations are better for search procedure than direct model quantization. QuantNAS discovers architectures with better PSNR/BitOps trade-off than uniform or mixed precision quantization of fixed architectures. We showcase the effectiveness of our method through its application to two search spaces inspired by the state-of-the-art SR models and RFDN. Thus, anyone can design a proper search space based on an existing architecture and apply our method to obtain better quality and efficiency. The proposed procedure is 30\% faster than direct weight quantization and is more stable.

We present 1.58-bit FLUX, the first successful approach to quantizing the state-of-the-art text-to-image generation model, FLUX.1-dev, using 1.58-bit weights (i.e., values in {-1, 0, +1}) while maintaining comparable performance for generating 1024 x 1024 images. Notably, our quantization method operates without access to image data, relying solely on self-supervision from the FLUX.1-dev model. Additionally, we develop a custom kernel optimized for 1.58-bit operations, achieving a 7.7x reduction in model storage, a 5.1x reduction in inference memory, and improved inference latency. Extensive evaluations on the GenEval and T2I Compbench benchmarks demonstrate the effectiveness of 1.58-bit FLUX in maintaining generation quality while significantly enhancing computational efficiency.

Unlike offline processing, streaming video vision-language models face two fundamental constraints: causality and accumulation. Causality prevents access to future frames that offline methods exploit, while accumulation causes tokens to grow unbounded, creating efficiency bottlenecks. However, existing approaches only regulate post-LLM kv-cache, leaving costly pre-LLM prefill unchanged. We introduce StreamingTOM, a training-free, plug-and-play two-stage framework that addresses both pre-LLM and post-LLM bottlenecks. Causal Temporal Reduction imposes a fixed per-frame budget and selects tokens based on adjacent-frame changes and token saliency, drastically reducing per-frame prefill cost by processing only a compact subset of visual tokens, ensuring predictable latency. Online Quantized Memory stores tokens in 4-bit format, retrieves relevant groups on demand, and dequantizes them, keeping the active kv-cache bounded regardless of stream length. Experiments demonstrate our method achieves 15.7times kv-cache compression ratio; compared to prior SOTA (LiveVLM), it delivers 1.2times lower peak memory and 2times faster TTFT. StreamingTOM achieves state-of-the-art accuracy among training-free methods with an average of 63.8% on offline benchmarks and 55.8% accuracy and 3.7 score on RVS. These results demonstrate that real-time streaming video understanding with bounded active memory is achievable without model retraining.

Code Large Language Models (Code LLMs) have emerged as powerful tools, revolutionizing the software development landscape by automating the coding process and reducing time and effort required to build applications. This paper focuses on training Code LLMs to specialize in the field of quantum computing. We begin by discussing the unique needs of quantum computing programming, which differ significantly from classical programming approaches or languages. A Code LLM specializing in quantum computing requires a foundational understanding of quantum computing and quantum information theory. However, the scarcity of available quantum code examples and the rapidly evolving field, which necessitates continuous dataset updates, present significant challenges. Moreover, we discuss our work on training Code LLMs to produce high-quality quantum code using the Qiskit library. This work includes an examination of the various aspects of the LLMs used for training and the specific training conditions, as well as the results obtained with our current models. To evaluate our models, we have developed a custom benchmark, similar to HumanEval, which includes a set of tests specifically designed for the field of quantum computing programming using Qiskit. Our findings indicate that our model outperforms existing state-of-the-art models in quantum computing tasks. We also provide examples of code suggestions, comparing our model to other relevant code LLMs. Finally, we introduce a discussion on the potential benefits of Code LLMs for quantum computing computational scientists, researchers, and practitioners. We also explore various features and future work that could be relevant in this context.

The optimal bit-width for achieving the best trade-off between quantized model size and accuracy has been a subject of ongoing debate. While some advocate for 4-bit quantization, others propose that 1.58-bit offers superior results. However, the lack of a cohesive framework for different bits has left such conclusions relatively tenuous. We present ParetoQ, the first unified framework that facilitates rigorous comparisons across 1-bit, 1.58-bit, 2-bit, 3-bit, and 4-bit quantization settings. Our findings reveal a notable learning transition between 2 and 3 bits: For 3-bits and above, the fine-tuned models stay close to their original pre-trained distributions, whereas for learning 2-bit networks or below, the representations change drastically. By optimizing training schemes and refining quantization functions, ParetoQ surpasses all previous methods tailored to specific bit widths. Remarkably, our ParetoQ ternary 600M-parameter model even outperforms the previous SoTA ternary 3B-parameter model in accuracy, using only one-fifth of the parameters. Extensive experimentation shows that ternary, 2-bit, and 3-bit quantization maintains comparable performance in the size-accuracy trade-off and generally exceeds 4-bit and binary quantization. Considering hardware constraints, 2-bit quantization offers promising potential for memory reduction and speedup.

Despite rapid progress in quantum optimization, broad real-hardware benchmarks comparing multiple algorithmic families across diverse combinatorial problems under a common protocol remain limited. We benchmark gate-based quantum optimization on four NP-hard problems: multi-dimensional knapsack (MDKP), maximum independent set (MIS), quadratic assignment (QAP), and market-share (MSP). We study VQE, CVaR-VQE, standard, multi-angle, and warm-start QAOA, together with qubit-efficient PCE and QRAO, on IBM Heron r1/r2 processors using resilience-level-2 mitigation. To our knowledge, this includes the first real-hardware QRAO results and the first multi-problem PCE hardware benchmark. Across 247 method-instance combinations, we report transpiled circuit size, hardware outcomes, and an independent-error gate-count fidelity proxy, F_{est}. For MDKP and MIS, an empirical operating point near F_{est}approx 0.1, corresponding to about 770 two-qubit gates at the median Heron-r2 CZ error rate, marks the onset of noise-dominated execution. QAP exposes a separate bottleneck: dense one-hot encodings and an exponentially sparse feasible manifold, with feasible fraction 10!/2^{100} at n=10; no tested hardware method produces a feasible assignment. Compiled QAOA-family circuits are generally noise dominated, and a matched uniform-random control shows that most feasible low-fidelity outcomes fall within the random range, apart from one finite-sample MIS warm-start exception. A SWAP-aware, fractional-gate, Nighthawk-topology compilation counterfactual reduces two-qubit counts but leaves all circuits below F_{est}=10^{-3}. These conclusions apply to the tested implementations rather than QAOA in general. Qubit-efficient methods extend runnable instance sizes, but only within the empirical fidelity budget.