Daily Papers

The quantum Hall effect, topological insulators and quantum capacitance are usually treated as distinct topics, yet they share a common thread. Bulk topology determines a protected boundary state, and quantum capacitance is one of the few electrostatic methods able to detect the density of states. This paper examines that connection. The integer quantum Hall effect showed that quantised boundary transport has a topological origin given by the Chern number, later extended to zero field in Z2 topological insulators with helical edge and Dirac surface states. Quantum capacitance, developed for two-dimensional electron gases, has since become a key technique for mapping the Landau level density of states underlying the quantum Hall effect and the linear Dirac density of states of topological surface states. This picture is complicated by self-consistent screening theory, which shows that the quantum Hall bulk splits into compressible and incompressible regions that shift with field. Local quantum capacitance measurements confirm that the bulk is not uniformly insulating across a quantised plateau, even though the plateau stays quantised. The paper argues that quantum capacitance is not a secondary feature of these phenomena but one of the clearest windows into the boundary density of states that topology imposes, and that it reveals the local, field-dependent nature of the insulating bulk assumption underlying the analogy between the quantum Hall effect and topological insulators.

Critical phenomena of quantum systems are useful for enhancement of quantum sensing. However, experimental realizations of criticality enhancement have been confined to very few systems, owing to the stringent requirements, including the thermodynamical or scaling limit, and fine control of interacting quantum susystems or particles. We here propose a simple critical quantum sensing scheme that requires neither of these conditions. The critical system is realized with a single parametrically-driven bosonic mode involving many non-interacting bosons. We calculate the quantum Fisher information, and perform a simulation, which confirms the criticality-enabled enhancement. We further detail the response of one of the quadratures to the variation of the control parameter. The numerical results reveal that its inverted variance exhibits a diverging behavior at the critical point. Based on the presently available control techniques of parametric driving, we expect our scheme can be realized in different systems, e.g., ion traps and superconducting circuits.

Complementary metal-oxide semiconductor (CMOS) technology has radically reshaped the world by taking humanity to the digital age. Cramming more transistors into the same physical space has enabled an exponential increase in computational performance, a strategy that has been recently hampered by the increasing complexity and cost of miniaturization. To continue achieving significant gains in computing performance, new computing paradigms, such as quantum computing, must be developed. However, finding the optimal physical system to process quantum information, and scale it up to the large number of qubits necessary to build a general-purpose quantum computer, remains a significant challenge. Recent breakthroughs in nanodevice engineering have shown that qubits can now be manufactured in a similar fashion to silicon field-effect transistors, opening an opportunity to leverage the know-how of the CMOS industry to address the scaling challenge. In this article, we focus on the analysis of the scaling prospects of quantum computing systems based on CMOS technology.

Quantum battery (QB) is the energy storage and extraction device that is governed by the principles of quantum mechanics. Here we propose a three-level Dicke QB and investigate its charging process by considering three quantum optical states: a Fock state, a coherent state, and a squeezed state. The performance of the QB in a coherent state is substantially improved compared to a Fock and squeezed states. We find that the locked energy is positively related to the entanglement between the charger and the battery, and diminishing the entanglement leads to the enhancement of the ergotropy. We demonstrate the QB system is asymptotically free as N rightarrow infty. The stored energy becomes fully extractable when N=10, and the charging power follows the consistent behavior as the stored energy, independent of the initial state of the charger.

Quantum simulation of many-body systems in materials science and chemistry are promising application areas for quantum computers. However, the limited scale and coherence of near-term quantum processors pose a significant obstacle to realizing this potential. Here, we theoretically outline how a single-circuit quantum electrodynamics (cQED) device, consisting of a transmon qubit coupled to a long-lived cavity mode, can be used to simulate the ground state of a highly-entangled quantum many-body spin chain. We exploit recently developed methods for implementing quantum operations to sequentially build up a matrix product state (MPS) representation of a many-body state. This approach re-uses the transmon qubit to read out the state of each spin in the chain and exploits the large state space of the cavity as a quantum memory encoding inter-site correlations and entanglement. We show, through simulation, that analog (pulse-level) control schemes can accurately prepare a known MPS representation of a quantum critical spin chain in significantly less time than digital (gate-based) methods, thereby reducing the exposure to decoherence. We then explore this analog-control approach for the variational preparation of an unknown ground state. We demonstrate that the large state space of the cavity can be used to replace multiple qubits in a qubit-only architecture, and could therefore simplify the design of quantum processors for materials simulation. We explore the practical limitations of realistic noise and decoherence and discuss avenues for scaling this approach to more complex problems that challenge classical computational methods.

Quantum computers can be used to address molecular structure, materials science and condensed matter physics problems, which currently stretch the limits of existing high-performance computing resources. Finding exact numerical solutions to these interacting fermion problems has exponential cost, while Monte Carlo methods are plagued by the fermionic sign problem. These limitations of classical computational methods have made even few-atom molecular structures problems of practical interest for medium-sized quantum computers. Yet, thus far experimental implementations have been restricted to molecules involving only Period I elements. Here, we demonstrate the experimental optimization of up to six-qubit Hamiltonian problems with over a hundred Pauli terms, determining the ground state energy for molecules of increasing size, up to BeH2. This is enabled by a hardware-efficient variational quantum eigensolver with trial states specifically tailored to the available interactions in our quantum processor, combined with a compact encoding of fermionic Hamiltonians and a robust stochastic optimization routine. We further demonstrate the flexibility of our approach by applying the technique to a problem of quantum magnetism. Across all studied problems, we find agreement between experiment and numerical simulations with a noisy model of the device. These results help elucidate the requirements for scaling the method to larger systems, and aim at bridging the gap between problems at the forefront of high-performance computing and their implementation on quantum hardware.

The long term scaling prospects for solid-state quantum computing architectures relies heavily on the ability to simply and reliably measure and control the coherent electron interaction strength, known as the tunnel coupling, t_c. Here, we describe a method to extract the t_c between two quantum dots (QDs) utilising their different tunnel rates to a reservoir. We demonstrate the technique on a few donor triple QD tunnel coupled to a nearby single-electron transistor (SET) in silicon. The device was patterned using scanning tunneling microscopy-hydrogen lithography allowing for a direct measurement of the tunnel coupling for a given inter-dot distance. We extract {t}_{{c}}=5.5pm 1.8;{GHz} and {t}_{{c}}=2.2pm 1.3;{GHz} between each of the nearest-neighbour QDs which are separated by 14.5 nm and 14.0 nm, respectively. The technique allows for an accurate measurement of t_c for nanoscale devices even when it is smaller than the electron temperature and is an ideal characterisation tool for multi-dot systems with a charge sensor.

Standing as one of the most significant barriers to reaching quantum advantage, state-preparation fidelities on noisy intermediate-scale quantum processors suffer from quantum-gate errors, which accumulate over time. A potential remedy is pulse-based state preparation. We numerically investigate the minimal evolution times (METs) attainable by optimizing (microwave and exchange) pulses on silicon hardware. We investigate two state preparation tasks. First, we consider the preparation of molecular ground states and find the METs for H_2, HeH^+, and LiH to be 2.4 ns, 4.4 ns, and 27.2 ns, respectively. Second, we consider transitions between arbitrary states and find the METs for transitions between arbitrary four-qubit states to be below 50 ns. For comparison, connecting arbitrary two-qubit states via one- and two-qubit gates on the same silicon processor requires approximately 200 ns. This comparison indicates that pulse-based state preparation is likely to utilize the coherence times of silicon hardware more efficiently than gate-based state preparation. Finally, we quantify the effect of silicon device parameters on the MET. We show that increasing the maximal exchange amplitude from 10 MHz to 1 GHz accelerates the METs, e.g., for H_2 from 84.3 ns to 2.4 ns. This demonstrates the importance of fast exchange. We also show that increasing the maximal amplitude of the microwave drive from 884 kHz to 56.6 MHz shortens state transitions, e.g., for two-qubit states from 1000 ns to 25 ns. Our results bound both the state-preparation times for general quantum algorithms and the execution times of variational quantum algorithms with silicon spin qubits.

Quantum microwave transmission is key to realizing modular superconducting quantum computers and distributed quantum networks. A large number of incoherent photons are thermally generated within the microwave frequency spectrum. The closeness of the transmitted quantum state to the source-generated quantum state at the input of the transmission link (measured by the transmission fidelity) degrades due to the presence of the incoherent photons. Hence, high-fidelity quantum microwave transmission has long been considered to be infeasible without refrigeration [3,4]. In this study, we propose a novel method for high-fidelity quantum microwave transmission using a room-temperature lossy waveguide. The proposed scheme consists of connecting two cryogenic nodes (i.e., a transmitter and a receiver) by the room-temperature lossy microwave waveguide. First, cryogenic preamplification is implemented prior to transmission. Second, at the receiver side, a cryogenic loop antenna is placed inside the output port of the waveguide and coupled to an LC harmonic oscillator located outside the waveguide. The loop antenna converts quantum microwave fields (which contain both signal and noise photons) to a quantum voltage across the coupled LC harmonic oscillator. The loop antenna detector at the receiver is designed to extensively suppress the induced photons across the LC oscillator. The signal transmittance is maintained intact by providing significant preamplification gain. Our calculations show that high-fidelity quantum transmission (i.e., more than 95%) is realized based on the proposed scheme for transmission distances reaching 100 m.

Developing the field of neuromorphic quantum computing necessitates designing scalable quantum memory devices. Here, we propose a superconducting quantum memory device in the microwave regime, termed as a microwave quantum memcapacitor. It comprises two linked resonators, the primary one is coupled to a Superconducting Quantum Interference Device, which allows for the modulation of the resonator properties through external magnetic flux. The auxiliary resonator, operated through weak measurements, provides feedback to the primary resonator, ensuring stable memory behaviour. This device operates with a classical input in one cavity while reading the response in the other, serving as a fundamental building block toward arrays of microwave quantum memcapacitors. We observe that a bipartite setup can retain its memory behaviour and gains entanglement and quantum correlations. Our findings pave the way for the experimental implementation of memcapacitive superconducting quantum devices and memory device arrays for neuromorphic quantum computing.

This study examines the performance of finite spin quantum batteries (QBs) using Heisenberg spin models with Dzyaloshinsky-Moriya (DM) and Kaplan--Shekhtman--Entin-Wohlman--Aharony (KSEA) interactions. The QBs are modeled as interacting quantum spins in local inhomogeneous magnetic fields, inducing variable Zeeman splitting. We derive analytical expressions for the maximal extractable work, ergotropy and the capacity of QBs, as recently examined by Yang et al. [Phys. Rev. Lett. 131, 030402 (2023)]. These quantities are analytically linked through certain quantum correlations, as posited in the aforementioned study. Different Heisenberg spin chain models exhibit distinct behaviors under varying conditions, emphasizing the importance of model selection for optimizing QB performance. In antiferromagnetic (AFM) systems, maximum ergotropy occurs with a Zeeman splitting field applied to either spin, while ferromagnetic (FM) systems benefit from a uniform Zeeman field. Temperature significantly impacts QB performance, with ergotropy in the AFM case being generally more robust against temperature increases compared to the FM case. Incorporating DM and KSEA couplings can significantly enhance the capacity and ergotropy extraction of QBs. However, there exists a threshold beyond which additional increases in these interactions cause a sharp decline in capacity and ergotropy. This behavior is influenced by temperature and quantum coherence, which signal the occurrence of a sudden phase transition. The resource theory of quantum coherence proposed by Baumgratz et al. [Phys. Rev. Lett. 113, 140401 (2014)] plays a crucial role in enhancing ergotropy and capacity. However, ergotropy is limited by both the system's capacity and the amount of coherence. These findings support the theoretical framework of spin-based QBs and may benefit future research on quantum energy storage devices.

Earlier, in the CINT program at Los Alamos National Laboratory, we focused ultrafast mode-locked lasers on the tip-sample junction of a scanning tunneling microscope to generate currents at hundreds of harmonics of the laser pulse repetition frequency. Each harmonic has a signal-to-noise ratio of 20 dB with a 10-dB linewidth of only 3 Hz. Now we model closed quantum nanocircuits with rectangular, triangular, or delta-function barrier, shunted by a beryllium filament for quasi-coherent electron transport over mean-free paths as great as 68 nm. The time-independent Schrödinger equation is solved with the boundary conditions that the wavefunction and its derivative are continuous at both connections. These four boundary conditions are used to form a four-by-four complex matrix equation with only zeros in the right-hand column vector which is required to have a non-trivial solution with each of the closed nanocircuits. Each model has four parameters: (1) the barrier length, (2) the height and shape of the barrier, (3) the length of the pre-barrier, and (4) the electron energy. Any three of these may be specified and then the fourth is varied to bring the determinant to zero to find the solutions on lines or surfaces in the space defined by the four parameters. First, we use a simplistic model having a rectangular barrier. The second model has a triangular barrier as a first approximation to field emission, and we are considering applying this approach for a self-contained nanoscale extension of our earlier effort to generate the harmonics at Los Alamos. The third model has a delta-function barrier, and the fourth model is an extension of the first one where the width of the rectangular barrier is varied inversely with its height.

We report on Quantinuum Helios, a 98-qubit trapped-ion quantum processor based on the quantum charge-coupled device (QCCD) architecture. Helios features ^{137}Ba^{+} hyperfine qubits, all-to-all connectivity enabled by a rotatable ion storage ring connecting two quantum operation regions by a junction, speed improvements from parallelized operations, and a new software stack with real-time compilation of dynamic programs. Averaged over all operational zones in the system, we achieve average infidelities of 2.5(1)times10^{-5} for single-qubit gates, 7.9(2)times10^{-4} for two-qubit gates, and 4.8(6)times10^{-4} for state preparation and measurement, none of which are fundamentally limited and likely able to be improved. These component infidelities are predictive of system-level performance in both random Clifford circuits and random circuit sampling, the latter demonstrating that Helios operates well beyond the reach of classical simulation and establishes a new frontier of fidelity and complexity for quantum computers.

In the context of quantum thermodynamics, quantum batteries have emerged as promising devices for energy storage and manipulation. Over the past decade, substantial progress has been made in understanding the fundamental properties of quantum batteries, with several experimental implementations showing great promise. This Perspective provides an overview of the solid-state materials platforms that could lead to fully operational quantum batteries. After briefly introducing the basic features of quantum batteries, we discuss organic microcavities, where superextensive charging has already been demonstrated experimentally. We then explore other materials, including inorganic nanostructures (such as quantum wells and dots), perovskite systems, and (normal and high-temperature) superconductors. Key achievements in these areas, relevant to the experimental realization of quantum batteries, are highlighted. We also address challenges and future research directions. Despite their enormous potential for energy storage devices, research into advanced materials for quantum batteries is still in its infancy. This paper aims to stimulate interdisciplinarity and convergence among different materials science research communities to accelerate the development of new materials and device architectures for quantum batteries.

We present an open-source database of superconducting quantum device designs that may be used as the starting point for customized devices. Each design can be generated programmatically using the open-source Qiskit Metal package, and simulated using finite-element electromagnetic solvers. We present a robust workflow for achieving high accuracy on design simulations. Many designs in the database are experimentally validated, showing excellent agreement between simulated and measured parameters. Our database includes a front-end interface that allows users to generate ``best-guess'' designs based on desired circuit parameters. This project lowers the barrier to entry for research groups seeking to make a new class of devices by providing them a well-characterized starting point from which to refine their designs.

We introduce AQCtensor, a novel algorithm to produce short-depth quantum circuits from Matrix Product States (MPS). Our approach is specifically tailored to the preparation of quantum states generated from the time evolution of quantum many-body Hamiltonians. This tailored approach has two clear advantages over previous algorithms that were designed to map a generic MPS to a quantum circuit. First, we optimize all parameters of a parametric circuit at once using Approximate Quantum Compiling (AQC) - this is to be contrasted with other approaches based on locally optimizing a subset of circuit parameters and "sweeping" across the system. We introduce an optimization scheme to avoid the so-called ``orthogonality catastrophe" - i.e. the fact that the fidelity of two arbitrary quantum states decays exponentially with the number of qubits - that would otherwise render a global optimization of the circuit impractical. Second, the depth of our parametric circuit is constant in the number of qubits for a fixed simulation time and fixed error tolerance. This is to be contrasted with the linear circuit Ansatz used in generic algorithms whose depth scales linearly in the number of qubits. For simulation problems on 100 qubits, we show that AQCtensor thus achieves at least an order of magnitude reduction in the depth of the resulting optimized circuit, as compared with the best generic MPS to quantum circuit algorithms. We demonstrate our approach on simulation problems on Heisenberg-like Hamiltonians on up to 100 qubits and find optimized quantum circuits that have significantly reduced depth as compared to standard Trotterized circuits.

We theoretically identify the noise-induced coherent contribution to the ergotropy of a four-level quantum heat engine coupled to a unimodal quantum cavity. We utilize a protocol where the passive state's quasiprobabilities can be analytically identified from the population-coherence coupled reduced density matrix. The reduced density matrix elements are evaluated using a microscopic quantum master equation formalism. Multiple ergotropies within the same coherence interval, each characterized by a positive and pronounced coherent contribution, are observed. These ergotropies are a result of population inversion as well as quasiprobability-population inversion, controllable through the coherence measure parameters. The optimal flux and power of the engine are found to be at moderate values of ergotropy with increasing values of noise-induced coherence. The optimal power at different coherences is found to possess a constant ergotropy.

We describe Qiskit, a software development kit for quantum information science. We discuss the key design decisions that have shaped its development, and examine the software architecture and its core components. We demonstrate an end-to-end workflow for solving a problem in condensed matter physics on a quantum computer that serves to highlight some of Qiskit's capabilities, for example the representation and optimization of circuits at various abstraction levels, its scalability and retargetability to new gates, and the use of quantum-classical computations via dynamic circuits. Lastly, we discuss some of the ecosystem of tools and plugins that extend Qiskit for various tasks, and the future ahead.

In the emergent realm of quantum computing, the Variational Quantum Eigensolver (VQE) stands out as a promising algorithm for solving complex quantum problems, especially in the noisy intermediate-scale quantum (NISQ) era. However, the ubiquitous presence of noise in quantum devices often limits the accuracy and reliability of VQE outcomes. This research introduces a novel approach to ameliorate this challenge by utilizing neural networks for zero noise extrapolation (ZNE) in VQE computations. By employing the Qiskit framework, we crafted parameterized quantum circuits using the RY-RZ ansatz and examined their behavior under varying levels of depolarizing noise. Our investigations spanned from determining the expectation values of a Hamiltonian, defined as a tensor product of Z operators, under different noise intensities to extracting the ground state energy. To bridge the observed outcomes under noise with the ideal noise-free scenario, we trained a Feed Forward Neural Network on the error probabilities and their associated expectation values. Remarkably, our model proficiently predicted the VQE outcome under hypothetical noise-free conditions. By juxtaposing the simulation results with real quantum device executions, we unveiled the discrepancies induced by noise and showcased the efficacy of our neural network-based ZNE technique in rectifying them. This integrative approach not only paves the way for enhanced accuracy in VQE computations on NISQ devices but also underlines the immense potential of hybrid quantum-classical paradigms in circumventing the challenges posed by quantum noise. Through this research, we envision a future where quantum algorithms can be reliably executed on noisy devices, bringing us one step closer to realizing the full potential of quantum computing.

Quantum Krylov subspace diagonalization (QKSD) algorithms provide a low-cost alternative to the conventional quantum phase estimation algorithm for estimating the ground and excited-state energies of a quantum many-body system. While QKSD algorithms typically rely on using the Hadamard test for estimating Krylov subspace matrix elements of the form, langle ϕ_i|e^{-iHτ}|ϕ_j rangle, the associated quantum circuits require an ancilla qubit with controlled multi-qubit gates that can be quite costly for near-term quantum hardware. In this work, we show that a wide class of Hamiltonians relevant to condensed matter physics and quantum chemistry contain symmetries that can be exploited to avoid the use of the Hadamard test. We propose a multi-fidelity estimation protocol that can be used to compute such quantities showing that our approach, when combined with efficient single-fidelity estimation protocols, provides a substantial reduction in circuit depth. In addition, we develop a unified theory of quantum Krylov subspace algorithms and present three new quantum-classical algorithms for the ground and excited-state energy estimation problems, where each new algorithm provides various advantages and disadvantages in terms of total number of calls to the quantum computer, gate depth, classical complexity, and stability of the generalized eigenvalue problem within the Krylov subspace.

While recent breakthroughs have proven the ability of noisy intermediate-scale quantum (NISQ) devices to achieve quantum advantage in classically-intractable sampling tasks, the use of these devices for solving more practically relevant computational problems remains a challenge. Proposals for attaining practical quantum advantage typically involve parametrized quantum circuits (PQCs), whose parameters can be optimized to find solutions to diverse problems throughout quantum simulation and machine learning. However, training PQCs for real-world problems remains a significant practical challenge, largely due to the phenomenon of barren plateaus in the optimization landscapes of randomly-initialized quantum circuits. In this work, we introduce a scalable procedure for harnessing classical computing resources to provide pre-optimized initializations for PQCs, which we show significantly improves the trainability and performance of PQCs on a variety of problems. Given a specific optimization task, this method first utilizes tensor network (TN) simulations to identify a promising quantum state, which is then converted into gate parameters of a PQC by means of a high-performance decomposition procedure. We show that this learned initialization avoids barren plateaus, and effectively translates increases in classical resources to enhanced performance and speed in training quantum circuits. By demonstrating a means of boosting limited quantum resources using classical computers, our approach illustrates the promise of this synergy between quantum and quantum-inspired models in quantum computing, and opens up new avenues to harness the power of modern quantum hardware for realizing practical quantum advantage.

We apply the Nakajima-Zwanzig approach to open quantum systems to study steady-state transport across generic multi-level junctions coupled to bosonic or fermionic reservoirs. The method allows for a unified diagrammatic formulation in Liouville space, with diagrams being classified according to an expansion in the coupling strength between the reservoirs and the junction. Analytical, approximate expressions are provided up to fourth order for the steady-state boson transport that generalize to multi-level systems the known results for the low-temperature thermal conductance in the spin-boson model. The formalism is applied to the problem of heat transport in a qubit-resonator junction modeled by the quantum Rabi model. Nontrivial transport features emerge as a result of the interplay between the qubit-oscillator detuning and coupling strength. For quasi-degenerate spectra, nonvanishing steady-state coherences cause a suppression of the thermal conductance.

Understanding Quantum Technologies 2025 is the 8th update of a free open science ebook that provides a 360 degrees overview of quantum technologies from science and technology to geopolitical and societal issues. It covers quantum physics history, quantum physics 101, gate-based quantum computing, quantum computing engineering (including quantum error corrections, quantum computing energetics and a new subsection of the effects of the Lieb-Robinson limit), quantum computing hardware (all qubit types, including quantum annealing and quantum simulation paradigms, history, science, research, implementation and vendors scientific and engineering approaches and roadmaps), quantum enabling technologies (cryogenics, control electronics, photonics, components fabs and manufacturing process, raw materials), unconventional computing (potential alternatives to quantum and classical computing), quantum computing algorithms, software development tools, resource estimate and benchmark tools, use case and case studies analysis methodologies, application use cases per market, quantum communications and cryptography (including QKD, PQC and QPU interconnect technologies), quantum sensing, quantum technologies around the world, quantum technologies societal impact and even quantum fake sciences. The main audience are computer science engineers, developers and IT specialists as well as quantum scientists and students who want to acquire a global view of how quantum technologies work, and particularly quantum computing. This version is an update to the 2024, 2023, 2022, and 2021 editions published respectively in October 2024, 2023, 2022 and 2021. An update log is provided at the end of the book.

Naturally occurring background radiation is a source of correlated decoherence events in superconducting qubits that will challenge error-correction schemes. To characterize the radiation environment in an unshielded laboratory, we performed broadband, spectroscopic measurements of background events in silicon substrates located inside a millikelvin refrigerator, an environment representative of superconducting qubit systems. We measured the background spectra in silicon substrates of two thicknesses, 0.5 mm and 1.5 mm, and obtained the average event rate and the integrated power deposition. In a 25 mm^2 area and the thinner substrate, these values are 0.023 events per second and 4.9 keV/s, counting events that deposit at least 40 keV. We find the background spectrum to be nearly featureless. Its intensity decreases by a factor of 40,000 between 100 keV and 3 MeV for silicon substrates 0.5 mm thick. We find the cryogenic measurements to be in good agreement with predictions based on measurements of the terrestrial gamma-ray flux, published models of cosmic-ray fluxes, a crude model of the cryostat, and radiation-transport simulations. No free parameters are required to predict the background spectra in the silicon substrates. The good agreement between measurements and predictions allow assessment of the relative contributions of terrestrial and cosmic background sources and their dependence on substrate thickness. Our spectroscopic measurements are performed with superconducting microresonators that transduce deposited energy to a readily detectable electrical signal. We find that gamma-ray emissions from radioisotopes are responsible for the majority of events depositing E<1.5 MeV, while nucleons among the cosmic-ray secondary particles cause most events that deposit more energy. These results suggest several paths to reducing the impact of background radiation on quantum circuits.

The detection of fractionally charged quasiparticles, which arise in the fractional quantum Hall regime, is of fundamental importance for probing their exotic quantum properties. While electronic interferometers have been central to probe their statistical properties, their interpretation is often complicated by bulk-edge interactions. Antidots, potential hills in the quantum Hall regime, are particularly valuable in this context, as they overcome the geometric limitations of conventional designs and act as controlled impurities within a quantum point contact. Furthermore, antidots allow for quasiparticle charge detection through straightforward conductance measurements, replacing the need for more demanding techniques. In this work, we employ a gate-defined bilayer graphene antidot operating in the Coulomb-dominated regime to study quasiparticle tunneling in both integer and fractional quantum Hall states. We show that the gate-voltage period and the oscillation slope directly reveal the charge of the tunneling quasiparticles, providing a practical method to measure fractional charge in graphene. We report direct measurements of fractional charge, finding q = e/3 at ν= 4/3, 5/3 and 7/3, q = 2e/3 at ν= 2/3 and q = 3e/5 at ν= 3/5, while at ν= 8/3 we observe signatures of both e/3 and 2e/3 tunneling charge. The simplicity and tunability of this design open a pathway to extend antidot-based charge measurements to other van der Waals materials, establishing antidots as a powerful and broadly applicable platform to study the quantum Hall effect.

Within the realm of early fault-tolerant quantum computing (EFTQC), quantum Krylov subspace diagonalization (QKSD) has emerged as a promising quantum algorithm for the approximate Hamiltonian diagonalization via projection onto the quantum Krylov subspace. However, the algorithm often requires solving an ill-conditioned generalized eigenvalue problem (GEVP) involving erroneous matrix pairs, which can significantly distort the solution. Since EFTQC assumes limited-scale error correction, finite sampling error becomes a dominant source of error in these matrices. This work focuses on quantifying sampling errors during the measurement of matrix element in the projected Hamiltonian examining two measurement approaches based on the Hamiltonian decompositions: the linear combination of unitaries and diagonalizable fragments. To reduce sampling error within a fixed budget of quantum circuit repetitions, we propose two measurement strategies: the shifting technique and coefficient splitting. The shifting technique eliminates redundant Hamiltonian components that annihilate either the bra or ket states, while coefficient splitting optimizes the measurement of common terms across different circuits. Numerical experiments with electronic structures of small molecules demonstrate the effectiveness of these strategies, reducing sampling costs by a factor of 20-500.

The strong coupling between magnetism and ferroelectricity was found in rare earth manganites, where the electric polarization could be induced by special magnetic ordering. There is no theoretical model that would allow us to study the static and dynamic properties of electric polarization in strongly correlated magnetic dielectrics. In the presented research, we have taken the main step towards the construction of such a fundamental model, and made a direct connection between the microscopic Katsura-Nagaosa-Balatsky theory and Mostovoy's phenomenological model for magnetically induced polarization. A novel description of the ferroelectricity of spin origin is proposed within the framework of the many-particle quantum hydrodynamics method. It is applied to the study of cells of magnetic ions, where the electric dipole moment is proportional to the vector product of spins. Our approach is based on the many-particle Pauli equation, where the influence of an external magnetic field is considered. We define the electric dipole moment operator of the ion cell and introduce the macroscopic polarization as the quantum mechanical average of that operator. We formulate a model for the description of nonequilibrium polarization and derive a new polarization evolution equation. The polarization switching in ferroelectric magnets with the spiral spin-density-wave state is considered, and we demonstrate that the proposed model yields known results and can predict novel effects. The dynamic magnetoelectric effect can be investigated by employing this novel equation to study the evolution of polarization.

The Casimir effect and superconductivity are foundational quantum phenomena whose interaction remains an open question in physics. How Casimir forces behave across a superconducting transition remains unresolved, owing to the experimental difficulty of achieving alignment, cryogenic environments, and isolating small changes from competing effects. This question carries implications for electron physics, quantum gravity, and high-temperature superconductivity. Here we demonstrate an on-chip superconducting platform that overcomes these challenges, achieving one of the most parallel Casimir configurations to date. Our microchip-based cavities achieve unprecedented area-to-separation ratio between plates, exceeding previous Casimir experiments by orders of magnitude and generating the strongest Casimir forces yet between compliant surfaces. Scanning tunneling microscopy (STM) is used for the first time to directly detect the resonant motion of a suspended membrane, with subatomic precision in both lateral positioning and displacement. Such precision measurements across a superconducting transition allow for the suppression of all van der Waals, electrostatic, and thermal effects. Preliminary measurements suggest superconductivity-dependent shifts in the Casimir force, motivating further investigation and comparison with theories. By uniting extreme parallelism, nanomechanics, and STM readout, our platform opens a new experimental frontier at the intersection of Casimir physics and superconductivity.

Applications such as simulating complicated quantum systems or solving large-scale linear algebra problems are very challenging for classical computers due to the extremely high computational cost. Quantum computers promise a solution, although fault-tolerant quantum computers will likely not be available in the near future. Current quantum devices have serious constraints, including limited numbers of qubits and noise processes that limit circuit depth. Variational Quantum Algorithms (VQAs), which use a classical optimizer to train a parametrized quantum circuit, have emerged as a leading strategy to address these constraints. VQAs have now been proposed for essentially all applications that researchers have envisioned for quantum computers, and they appear to the best hope for obtaining quantum advantage. Nevertheless, challenges remain including the trainability, accuracy, and efficiency of VQAs. Here we overview the field of VQAs, discuss strategies to overcome their challenges, and highlight the exciting prospects for using them to obtain quantum advantage.

We present 1d-qt-ideal-solver, an open-source Python library for simulating one-dimensional quantum tunneling dynamics under idealized coherent conditions. The solver implements the split-operator method with second-order Trotter-Suzuki factorization, utilizing FFT-based spectral differentiation for the kinetic operator and complex absorbing potentials to eliminate boundary reflections. Numba just-in-time compilation achieves performance comparable to compiled languages while maintaining code accessibility. We validate the implementation through two canonical test cases: rectangular barriers modeling field emission through oxide layers and Gaussian barriers approximating scanning tunneling microscopy interactions. Both simulations achieve exceptional numerical fidelity with machine-precision energy conservation over femtosecond-scale propagation. Comparative analysis employing information-theoretic measures and nonparametric hypothesis tests reveals that rectangular barriers exhibit moderately higher transmission coefficients than Gaussian barriers in the over-barrier regime, though Jensen-Shannon divergence analysis indicates modest practical differences between geometries. Phase space analysis confirms complete decoherence when averaged over spatial-temporal domains. The library name reflects its scope: idealized signifies deliberate exclusion of dissipation, environmental coupling, and many-body interactions, limiting applicability to qualitative insights and pedagogical purposes rather than quantitative experimental predictions. Distributed under the MIT License, the library provides a deployable tool for teaching quantum mechanics and preliminary exploration of tunneling dynamics.

The encoding of qubits in semiconductor spin carriers has been recognised as a promising approach to a commercial quantum computer that can be lithographically produced and integrated at scale. However, the operation of the large number of qubits required for advantageous quantum applications will produce a thermal load exceeding the available cooling power of cryostats at millikelvin temperatures. As the scale-up accelerates, it becomes imperative to establish fault-tolerant operation above 1 kelvin, where the cooling power is orders of magnitude higher. Here, we tune up and operate spin qubits in silicon above 1 kelvin, with fidelities in the range required for fault-tolerant operation at such temperatures. We design an algorithmic initialisation protocol to prepare a pure two-qubit state even when the thermal energy is substantially above the qubit energies, and incorporate radio-frequency readout to achieve fidelities up to 99.34 per cent for both readout and initialisation. Importantly, we demonstrate a single-qubit Clifford gate fidelity of 99.85 per cent, and a two-qubit gate fidelity of 98.92 per cent. These advances overcome the fundamental limitation that the thermal energy must be well below the qubit energies for high-fidelity operation to be possible, surmounting a major obstacle in the pathway to scalable and fault-tolerant quantum computation.

We introduce and analyze a novel quantum machine learning model motivated by convolutional neural networks. Our quantum convolutional neural network (QCNN) makes use of only O(log(N)) variational parameters for input sizes of N qubits, allowing for its efficient training and implementation on realistic, near-term quantum devices. The QCNN architecture combines the multi-scale entanglement renormalization ansatz and quantum error correction. We explicitly illustrate its potential with two examples. First, QCNN is used to accurately recognize quantum states associated with 1D symmetry-protected topological phases. We numerically demonstrate that a QCNN trained on a small set of exactly solvable points can reproduce the phase diagram over the entire parameter regime and also provide an exact, analytical QCNN solution. As a second application, we utilize QCNNs to devise a quantum error correction scheme optimized for a given error model. We provide a generic framework to simultaneously optimize both encoding and decoding procedures and find that the resultant scheme significantly outperforms known quantum codes of comparable complexity. Finally, potential experimental realization and generalizations of QCNNs are discussed.

Quantum theory departs from classical physics in its treatment of correlations, most prominently through the phenomena of contextuality and nonlocality. Once regarded primarily as foundational curiosities, these effects are now understood as key operational resources for quantum computation, communication, and simulation. Although traditionally investigated in distinct settings, recent theoretical and experimental advances have revealed deep conceptual, mathematical, and operational connections between them. This review presents a unified perspective on these developments based on sheaf-theoretic and graph-theoretic frameworks, which provide theory-independent characterizations of statistical correlations. These approaches clarify the structural relationship between contextuality and nonlocality, facilitate the formulation of experimentally testable inequalities, and guide implementations in realistic physical platforms, with particular emphasis on photonic systems. By bridging abstract theoretical structures and concrete experimental realizations, this review sheds light on the nonclassical foundations of quantum correlations and their emerging role in quantum technologies.

AlphaFold has achieved groundbreaking advancements in protein structure prediction, exerting profound influence across biology, medicine, and drug discovery. However, its reliance on multiple sequence alignment (MSA) is inherently time-consuming due to the NP-hard nature of constructing MSAs. Quantum computing emerges as a promising alternative, compared to classical computers, offering the potentials for exponential speedup and improved accuracy on such complex optimization challenges. This work bridges the gap between quantum computing and MSA task efficiently and successfully, where we compared classical and quantum computational scaling as the number of qubits increases, and assessed the role of quantum entanglement in model performance. Furthermore, we proposed an innovative hybrid query encoding approach hyQUBO to avoid redundancy, and thereby the quantum resources significantly reduced to a scaling of O(NL). Additionally, coupling of VQE and the quenched CVaR scheme was utilized to enhance the robustness and convergence. The integration of multiple strategies facilitates the robust deployment of the quantum algorithm from idealized simulators (on CPU and GPU) to real-world, noisy quantum devices (HYQ-A37). To the best of our knowledge, our work represented the largest-scale implementation of digital simulation using up to 16 qubits on a trapped-ion quantum computer for life science problem, which achieved state of the art performance in both simulation and experimental results. Our work paves the way towards large-scale simulations of life science tasks on real quantum processors.

Comprehensive study using DC transport, specific heat, magnetization, and two-coil mutual inductance measurements unveils an understanding of three temperature regimes in SmB_6: (i) T geq T^{*} (sim66K), (ii) T_g (sim40 K) leq T < T^{*}, and (iii) T < T_g. Onset of Kondo breakdown below T^{*} releases disorder-driven magnetic fluctuations, which splits the bulk (sim116K) and surface Kondo temperature (T_k^{s} approx 7 K). Below T_g, as magnetic fluctuations subside, surface Kondo screening revives, stabilizing the topological surface state and generating an in-gap feature (sim2.2 meV) across which Dirac-like carriers are excited. Nyquist impedance analysis reveals a crossover from purely capacitive to capacitive-inductive behavior, signalling a disorder-driven two-fluid phase of heavy quasiparticles and light, high-mobility carriers below T_g. We identify a characteristic length scale, L_{ν_0}(T), associated with the high-mobility phase, exhibiting an almost divergent trend below T_k^{s}. These findings underscore the complex nature of the surface conducting state in SmB_6.

QSE is emerging as a critical discipline to make quantum computing accessible to a broader developer community; however, most quantum development environments still require developers to engage with low-level details across the software stack - including problem encoding, circuit construction, algorithm configuration, hardware selection, and result interpretation - making them difficult for classical software engineers to use. To bridge this gap, we present C2|Q>, a hardware-agnostic quantum software development framework that translates specific types of classical specifications into quantum-executable programs while preserving methodological rigor. The framework applies modular SE principles by classifying the workflow into three core modules: an encoder that classifies problems, produces Quantum-Compatible Formats, and constructs quantum circuits, a deployment module that generates circuits and recommends hardware based on fidelity, runtime, and cost, and a decoder that interprets quantum outputs into classical solutions. In evaluation, the encoder module achieved a 93.8% completion rate, the hardware recommendation module consistently selected the appropriate quantum devices for workloads scaling up to 56 qubits. End-to-end experiments on 434 Python programs and 100 JSON problem instances show that the full C2|Q> workflow executes reliably on simulators and can be deployed successfully on representative real quantum hardware, with empirical runs limited to small- and medium-sized instances consistent with current NISQ capabilities. These results indicate that C2|Q> lowers the entry barrier to quantum software development by providing a reproducible, extensible toolchain that connects classical specifications to quantum execution. The open-source implementation of C2|Q> is available at https://github.com/C2-Q/C2Q and as a Python package at https://pypi.org/project/c2q-framework/.

Quantum algorithms offer significant speedups over their classical counterparts for a variety of problems. The strongest arguments for this advantage are borne by algorithms for quantum search, quantum phase estimation, and Hamiltonian simulation, which appear as subroutines for large families of composite quantum algorithms. A number of these quantum algorithms were recently tied together by a novel technique known as the quantum singular value transformation (QSVT), which enables one to perform a polynomial transformation of the singular values of a linear operator embedded in a unitary matrix. In the seminal GSLW'19 paper on QSVT [Gily\'en, Su, Low, and Wiebe, ACM STOC 2019], many algorithms are encompassed, including amplitude amplification, methods for the quantum linear systems problem, and quantum simulation. Here, we provide a pedagogical tutorial through these developments, first illustrating how quantum signal processing may be generalized to the quantum eigenvalue transform, from which QSVT naturally emerges. Paralleling GSLW'19, we then employ QSVT to construct intuitive quantum algorithms for search, phase estimation, and Hamiltonian simulation, and also showcase algorithms for the eigenvalue threshold problem and matrix inversion. This overview illustrates how QSVT is a single framework comprising the three major quantum algorithms, thus suggesting a grand unification of quantum algorithms.

Demonstrating the practical utility of Noisy Intermediate-Scale Quantum (NISQ) hardware for recurrent tasks in Computer-Aided Drug Discovery is of paramount importance. We tackle this challenge by performing three-dimensional protein pockets hydration-site prediction on a quantum computer. Formulating the water placement problem as a Quadratic Unconstrained Binary Optimization (QUBO), we use a hybrid approach coupling a classical three-dimensional reference-interaction site model (3D-RISM) to an efficient quantum optimization solver, to run various hardware experiments up to 123 qubits. Matching the precision of classical approaches, our results reproduced experimental predictions on real-life protein-ligand complexes. Furthermore, through a detailed resource estimation analysis, we show that accuracy can be systematically improved with increasing number of qubits, indicating that full quantum utility is in reach. Finally, we provide evidence that advantageous situations could be found for systems where classical optimization struggles to provide optimal solutions. The method has potential for assisting simulations of protein-ligand complexes for drug lead optimization and setup of docking calculations.

The Poisson equation has wide applications in many areas of science and engineering. Although there are some quantum algorithms that can efficiently solve the Poisson equation, they generally require a fault-tolerant quantum computer which is beyond the current technology. In this paper, we propose a Variational Quantum Algorithm (VQA) to solve the Poisson equation, which can be executed on Noise Intermediate-Scale Quantum (NISQ) devices. In detail, we first adopt the finite difference method to transform the Poisson equation into a linear system. Then, according to the special structure of the linear system, we find an explicit tensor product decomposition, with only 2log n+1 items, of its coefficient matrix under a specific set of simple operators, where n is the dimension of the coefficient matrix. This implies that the proposed VQA only needs O(log n) measurements, which dramatically reduce quantum resources. Additionally, we perform quantum Bell measurements to efficiently evaluate the expectation values of simple operators. Numerical experiments demonstrate that our algorithm can effectively solve the Poisson equation.

Machine Learning-based quantum error mitigation (ML-QEM) has emerged as a promising approach for improving the performance of noisy quantum algorithms. However, existing ML-QEM methods often have restricted applicability to variational circuits and rely on inaccessible noiseless training data. In this work, we propose a practical ML-QEM protocol tailored to variational quantum algorithms, which generates training data by simulating (near-)Clifford circuits. This data is used for model selection and training, producing a mitigation model that can correct variational circuits with arbitrary parameters and transfer across different target Hamiltonians of similar structure. We benchmark the proposed method on the Variational Quantum Eigensolver (VQE) task for the Sherrington-Kirkpatrick Hamiltonian of up to n=12 qubits under various noise models, analyzing its effect on trainability and comparing its performance against standard Zero-Noise Extrapolation (ZNE). The results demonstrate consistent several-fold error suppression across all tested settings and superior performance over ZNE in the high-noise regime, providing evidence for the applicability of the proposed protocol to present-day NISQ processors.

Quantum hardware based on circuit quantum electrodynamics makes extensive use of airbridges to suppress unwanted modes of wave propagation in coplanar-waveguide transmission lines. Airbridges also provide an interconnect enabling transmission lines to cross. Traditional airbridge fabrication produces a curved profile by reflowing resist at elevated temperature prior to metallization. The elevated temperature can affect the coupling energy and even yield of pre-fabricated Josephson elements of superconducting qubits, tuneable couplers and resonators. We employ grayscale lithography in place of reflow to reduce the peak airbridge processing temperature from 200 to 150^circC, showing a substantial yield increase of transmon qubits with Josephson elements realized using Al-contacted InAs nanowires.

Two-dimensional (2D) materials have emerged as a versatile and powerful platform for quantum technologies, offering atomic-scale control, strong quantum confinement, and seamless integration into heterogeneous device architectures. Their reduced dimensionality enables unique quantum phenomena, including optically addressable spin defects, tunable single-photon emitters, low-dimensional magnetism, gate-controlled superconductivity, and correlated states in Moiré superlattices. This Roadmap provides a comprehensive overview of recent progress and future directions in exploiting 2D materials for quantum sensing, computation, communication, and simulation. We survey advances spanning spin defects and quantum sensing, quantum emitters and nonlinear photonics, computational theory and data-driven discovery of quantum defects, spintronic and magnonic devices, cavity-engineered quantum materials, superconducting and hybrid quantum circuits, quantum dots, Moiré quantum simulators, and quantum communication platforms. Across these themes, we identify common challenges in defect control, coherence preservation, interfacial engineering, and scalable integration, alongside emerging opportunities driven by machine-learning-assisted design and integrated experiment-theory feedback loops. By connecting microscopic quantum states to mesoscopic excitations and macroscopic device architectures, this Roadmap outlines a materials-centric framework for integrating coherent quantum functionalities and positions 2D materials as foundational building blocks for next-generation quantum technologies.

Genuine quantum-mechanical effects are readily observable in modern optomechanical systems comprising bosonic ("classical") optical resonators. Here we describe unique features and advantages of optical two-level systems, or qubits, for optomechanics. The qubit state can be coherently controlled using both phonons and resonant or detuned photons. We experimentally demonstrate this using charge-controlled InAs quantum dots (QDs) in surface-acoustic-wave resonators. Time-correlated single-photon counting measurements reveal the control of QD population dynamics using engineered optical pulses and mechanical motion. As a first example, at moderate acoustic drive strengths, we demonstrate the potential of this technique to maximize fidelity in quantum microwave-to-optical transduction. Specifically, we tailor the scheme so that mechanically assisted photon scattering is enhanced over the direct detuned photon scattering from the QD. Spectral analysis reveals distinct scattering channels related to Rayleigh scattering and luminescence in our pulsed excitation measurements which lead to time-dependent scattering spectra. Quantum-mechanical calculations show good agreement with our experimental results, together providing a comprehensive description of excitation, scattering and emission in a coupled QD-phonon optomechanical system.

We scale a CUDA-Q-native pipeline coupling a generative quantum eigensolver (GQE) to quantum-selected configuration interaction (QSCI) across active spaces of 14 to 44 qubits, applied to the extreme-ultraviolet (EUV) photoresist chemistry of monoalkyltin oxo-hydroxides. A GPT-2 policy emits UCCSD operator sequences; sampled bitstrings become determinants, diagonalised classically, and a cross-circuit generalised-eigenvalue refinement makes every reported GQE+QSCI energy a variational upper bound. Every rung from 14 to 40 qubits carries an exact CASCI or FCI reference, up to 166 million determinants for SnO at 32 qubits. The pipeline is chemically accurate, below 1.6 mHa, through 30 qubits on methyltin trihydroxide and through 32 on SnO, on the best seed at the top rungs. Circuit depth rather than training length is the scaling lever; the refined subspace grows near-linearly with the operator count while staying a vanishing fraction of the determinant space, 0.017% at the 32-qubit SnO rung. It also runs on the 54-qubit IQM Emerald processor, at the shallow depths its routed two-qubit gates allow, reaching +0.330 mHa for SnO at 14 qubits from a CCSD-amplitude-ordered pool prefix and +3.92 mHa for the industrial n-butyltin ligand at 22 qubits from depth-truncated trained circuits under per-circuit readout self-calibration, 81% of the active-space correlation; classical configuration recovery on those counts tightens the 22-qubit result to +0.18 to 0.21 mHa. For the methyl resist, ionisation collapses the classical UCCSD(T) Sn-C bond dissociation energy from 72.6 to 21.2 kcal/mol, the switch that flips solubility on exposure. Against that, the 40-qubit result is support-limited at 22.8 mHa, the full trained ansatz on hardware awaits better fidelities, and classical subspace expansion reaches the 32 to 40-qubit spaces with no quantum sampler, so that boundary is mapped, not beaten.

In the rapidly evolving field of quantum computing, optimizing quantum circuits for specific tasks is crucial for enhancing performance and efficiency. More recently, quantum sensing has become a distinct and rapidly growing branch of research within the area of quantum science and technology. The field is expected to provide new opportunities, especially regarding high sensitivity and precision. Entanglement is one of the key factors in achieving high sensitivity and measurement precision [3]. This paper presents a novel approach utilizing quantum machine learning techniques to optimize entanglement distribution in quantum sensor circuits. By leveraging reinforcement learning within a quantum environment, we aim to optimize the entanglement layout to maximize Quantum Fisher Information (QFI) and entanglement entropy, which are key indicators of a quantum system's sensitivity and coherence, while minimizing circuit depth and gate counts. Our implementation, based on Qiskit, integrates noise models and error mitigation strategies to simulate realistic quantum environments. The results demonstrate significant improvements in circuit performance and sensitivity, highlighting the potential of machine learning in quantum circuit optimization by measuring high QFI and entropy in the range of 0.84-1.0 with depth and gate count reduction by 20-86%.

The prediction of material degradation is an important problem to solve in many industries. Environmental conditions, such as humidity and temperature, are important drivers of degradation processes, with corrosion being one of the most prominent ones. Quantum machine learning is a promising research field but suffers from well known deficits such as barren plateaus and measurement overheads. To address this problem, recent research has examined quantum reservoir computing to address time-series prediction tasks. Although a promising idea, developing circuits that are expressive enough while respecting the limited depths available on current devices is challenging. In classical reservoir computing, the onion echo state network model (ESN) [https://doi.org/10.1007/978-3-031-72359-9_9] was introduced to increase the interpretability of the representation structure of the embeddings. This onion ESN model utilizes a concatenation of smaller reservoirs that describe different time scales by covering different regions of the eigenvalue spectrum. Here, we use the same idea in the realm of quantum reservoir computing by simultaneously evolving smaller quantum reservoirs to better capture all the relevant time-scales while keeping the circuit depth small. We do this by modifying the rotation angles which we show alters the eigenvalues of the quantum evolution, but also note that modifying the number of mid-circuit measurements accomplishes the same goals of changing the long-term or short-term memory. This onion QRC outperforms a simple model and a single classical reservoir for predicting the degradation of aluminum alloys in different environmental conditions. By combining the onion QRC with an additional classical reservoir layer, the prediction accuracy is further improved.

Quantum algorithms for probing ground-state properties of quantum systems require good initial states. Projection-based methods such as eigenvalue filtering rely on inputs that have a significant overlap with the low-energy subspace, which can be challenging for large, strongly-correlated systems. This issue has motivated the study of physically-inspired dynamical approaches such as thermodynamic cooling. In this work, we introduce a ground-state preparation algorithm based on the simulation of quantum dynamics. Our main insight is to transform the Hamiltonian by a shifted sign function via quantum signal processing, effectively mapping eigenvalues into positive and negative subspaces separated by a large gap. This automatically ensures that all states within each subspace conserve energy with respect to the transformed Hamiltonian. Subsequent time-evolution with a perturbed Hamiltonian induces transitions to lower-energy states while preventing unwanted jumps to higher energy states. The approach does not rely on a priori knowledge of energy gaps and requires no additional qubits to model a bath. Furthermore, it makes mathcal{O}(d^{,3/2}/epsilon) queries to the time-evolution operator of the system and mathcal{O}(d^{,3/2}) queries to a block-encoding of the perturbation, for d cooling steps and an epsilon-accurate energy resolution. Our results provide a framework for combining quantum signal processing and Hamiltonian simulation to design heuristic quantum algorithms for ground-state preparation.

In this paper, we propose a unified approach to harness quantum conformal methods for multi-output distributions, with a particular emphasis on two experimental paradigms: (i) a standard 2-qubit circuit scenario producing a four-dimensional outcome distribution, and (ii) a multi-basis measurement setting that concatenates measurement probabilities in different bases (Z, X, Y) into a twelve-dimensional output space. By combining a multioutput regression model (e.g., random forests) with distributional conformal prediction, we validate coverage and interval-set sizes on both simulated quantum data and multi-basis measurement data. Our results confirm that classical conformal prediction can effectively provide coverage guarantees even when the target probabilities derive from inherently quantum processes. Such synergy opens the door to next-generation quantum-classical hybrid frameworks, providing both improved interpretability and rigorous coverage for quantum machine learning tasks. All codes and full reproducible Colab notebooks are made available at https://github.com/detasar/QECMMOU.

The many-body nature of nuclear physics problems poses significant computational challenges. These challenges become even more pronounced when studying the resonance states of nuclear systems, which are governed by the non-Hermitian Hamiltonian. Quantum computing, particularly for quantum many-body systems, offers a promising alternative, especially within the constraints of current noisy intermediate-scale quantum (NISQ) devices. This work aims to simulate nuclear resonances using quantum algorithms by developing a variational framework compatible with non-Hermitian Hamiltonians and implementing it fully on a quantum simulator. We employ the complex scaling technique to extract resonance positions classically and adapt it for quantum simulations using a two-step algorithm. First, we transform the non-Hermitian Hamiltonian into a Hermitian form by using the energy variance as a cost function within a variational framework. Second, we perform theta-trajectory calculations to determine optimal resonance positions in the complex energy plane. To address resource constraints on NISQ devices, we utilize Gray Code (GC) encoding to reduce qubit requirements. We first validate our approach using a schematic potential model that mimics a nuclear potential, successfully reproducing known resonance energies with high fidelity. We then extend the method to a more realistic alpha-alpha nuclear potential and compute the resonance energies with a basis size of 16, using only four qubits. This study demonstrates, for the first time, that the complete theta-trajectory method can be implemented on a quantum computer without relying on any classical input beyond the Hamiltonian. The results establish a scalable and efficient quantum framework for simulating resonance phenomena in nuclear systems. This work represents a significant step toward quantum simulations of open quantum systems.

scqubits is an open-source Python package for simulating and analyzing superconducting circuits. It provides convenient routines to obtain energy spectra of common superconducting qubits, such as the transmon, fluxonium, flux, cos(2ϕ) and the 0-π qubit. scqubits also features a number of options for visualizing the computed spectral data, including plots of energy levels as a function of external parameters, display of matrix elements of various operators as well as means to easily plot qubit wavefunctions. Many of these tools are not limited to single qubits, but extend to composite Hilbert spaces consisting of coupled superconducting qubits and harmonic (or weakly anharmonic) modes. The library provides an extensive suite of methods for estimating qubit coherence times due to a variety of commonly considered noise channels. While all functionality of scqubits can be accessed programatically, the package also implements GUI-like widgets that, with a few clicks can help users both create relevant Python objects, as well as explore their properties through various plots. When applicable, the library harnesses the computing power of multiple cores via multiprocessing. scqubits further exposes a direct interface to the Quantum Toolbox in Python (QuTiP) package, allowing the user to efficiently leverage QuTiP's proven capabilities for simulating time evolution.

A large amount of effort has recently been put into understanding the barren plateau phenomenon. In this perspective article, we face the increasingly loud elephant in the room and ask a question that has been hinted at by many but not explicitly addressed: Can the structure that allows one to avoid barren plateaus also be leveraged to efficiently simulate the loss classically? We present strong evidence that commonly used models with provable absence of barren plateaus are also classically simulable, provided that one can collect some classical data from quantum devices during an initial data acquisition phase. This follows from the observation that barren plateaus result from a curse of dimensionality, and that current approaches for solving them end up encoding the problem into some small, classically simulable, subspaces. Thus, while stressing quantum computers can be essential for collecting data, our analysis sheds serious doubt on the non-classicality of the information processing capabilities of parametrized quantum circuits for barren plateau-free landscapes. We end by discussing caveats in our arguments, the role of smart initializations and the possibility of provably superpolynomial, or simply practical, advantages from running parametrized quantum circuits.

In this paper, we propose the Quantum Data Center (QDC), an architecture combining Quantum Random Access Memory (QRAM) and quantum networks. We give a precise definition of QDC, and discuss its possible realizations and extensions. We discuss applications of QDC in quantum computation, quantum communication, and quantum sensing, with a primary focus on QDC for T-gate resources, QDC for multi-party private quantum communication, and QDC for distributed sensing through data compression. We show that QDC will provide efficient, private, and fast services as a future version of data centers.

Binary classical information is routinely encoded in the two metastable states of a dynamical system. Since these states may exhibit macroscopic lifetimes, the encoded information inherits a strong protection against bit-flips. A recent qubit - the cat-qubit - is encoded in the manifold of metastable states of a quantum dynamical system, thereby acquiring bit-flip protection. An outstanding challenge is to gain quantum control over such a system without breaking its protection. If this challenge is met, significant shortcuts in hardware overhead are forecast for quantum computing. In this experiment, we implement a cat-qubit with bit-flip times exceeding ten seconds. This is a four order of magnitude improvement over previous cat-qubit implementations, and six orders of magnitude enhancement over the single photon lifetime that compose this dynamical qubit. This was achieved by introducing a quantum tomography protocol that does not break bit-flip protection. We prepare and image quantum superposition states, and measure phase-flip times above 490 nanoseconds. Most importantly, we control the phase of these superpositions while maintaining the bit-flip time above ten seconds. This work demonstrates quantum operations that preserve macroscopic bit-flip times, a necessary step to scale these dynamical qubits into fully protected hardware-efficient architectures.

Classical Internet evolved exceptionally during the last five decades, from a network comprising a few static nodes in the early days to a leviathan interconnecting billions of devices. This has been possible by the separation of concern principle, for which the network functionalities are organized as a stack of layers, each providing some communication functionalities through specific network protocols. In this survey, we aim at highlighting the impossibility of adapting the classical Internet protocol stack to the Quantum Internet, due to the marvels of quantum mechanics. Indeed, the design of the Quantum Internet requires a major paradigm shift of the whole protocol stack for harnessing the peculiarities of quantum entanglement and quantum information. In this context, we first overview the relevant literature about Quantum Internet protocol stack. Then, stemming from this, we sheds the light on the open problems and required efforts toward the design of an effective and complete Quantum Internet protocol stack. To the best of authors' knowledge, a survey of this type is the first of its own. What emerges from this analysis is that the Quantum Internet, though still in its infancy, is a disruptive technology whose design requires an inter-disciplinary effort at the border between quantum physics, computer and telecommunications engineering.

The key challenge in the noisy intermediate-scale quantum era is finding useful circuits compatible with current device limitations. Variational quantum algorithms (VQAs) offer a potential solution by fixing the circuit architecture and optimizing individual gate parameters in an external loop. However, parameter optimization can become intractable, and the overall performance of the algorithm depends heavily on the initially chosen circuit architecture. Several quantum architecture search (QAS) algorithms have been developed to design useful circuit architectures automatically. In the case of parameter optimization alone, noise effects have been observed to dramatically influence the performance of the optimizer and final outcomes, which is a key line of study. However, the effects of noise on the architecture search, which could be just as critical, are poorly understood. This work addresses this gap by introducing a curriculum-based reinforcement learning QAS (CRLQAS) algorithm designed to tackle challenges in realistic VQA deployment. The algorithm incorporates (i) a 3D architecture encoding and restrictions on environment dynamics to explore the search space of possible circuits efficiently, (ii) an episode halting scheme to steer the agent to find shorter circuits, and (iii) a novel variant of simultaneous perturbation stochastic approximation as an optimizer for faster convergence. To facilitate studies, we developed an optimized simulator for our algorithm, significantly improving computational efficiency in simulating noisy quantum circuits by employing the Pauli-transfer matrix formalism in the Pauli-Liouville basis. Numerical experiments focusing on quantum chemistry tasks demonstrate that CRLQAS outperforms existing QAS algorithms across several metrics in both noiseless and noisy environments.

Quantum computers provide new avenues to access ground and excited state properties of systems otherwise difficult to simulate on classical hardware. New approaches using subspaces generated by real-time evolution have shown efficiency in extracting eigenstate information, but the full capabilities of such approaches are still not understood. In recent work, we developed the variational quantum phase estimation (VQPE) method, a compact and efficient real-time algorithm to extract eigenvalues on quantum hardware. Here we build on that work by theoretically and numerically exploring a generalized Krylov scheme where the Krylov subspace is constructed through a parametrized real-time evolution, which applies to the VQPE algorithm as well as others. We establish an error bound that justifies the fast convergence of our spectral approximation. We also derive how the overlap with high energy eigenstates becomes suppressed from real-time subspace diagonalization and we visualize the process that shows the signature phase cancellations at specific eigenenergies. We investigate various algorithm implementations and consider performance when stochasticity is added to the target Hamiltonian in the form of spectral statistics. To demonstrate the practicality of such real-time evolution, we discuss its application to fundamental problems in quantum computation such as electronic structure predictions for strongly correlated systems.

Counter-intuitively, quantum mechanics enables quantum particles to propagate simultaneously among multiple space-time trajectories. Hence, a quantum information carrier can travel through different communication channels in a quantum superposition of different orders, so that the relative time-order of the communication channels becomes indefinite. This is realized by utilizing a quantum device known as quantum switch. In this paper, we investigate, from a communication-engineering perspective, the use of the quantum switch within the quantum teleportation process, one of the key functionalities of the Quantum Internet. Specifically, a theoretical analysis is conducted to quantify the performance gain that can be achieved by employing a quantum switch for the entanglement distribution process within the quantum teleportation with respect to the case of absence of quantum switch. This analysis reveals that, by utilizing the quantum switch, the quantum teleportation is heralded as a noiseless communication process with a probability that, remarkably and counter-intuitively, increases with the noise levels affecting the communication channels considered in the indefinite-order time combination.

Quantum neural networks (QNNs) have emerged as a leading strategy to establish applications in machine learning, chemistry, and optimization. While the applications of QNN have been widely investigated, its theoretical foundation remains less understood. In this paper, we formulate a theoretical framework for the expressive ability of data re-uploading quantum neural networks that consist of interleaved encoding circuit blocks and trainable circuit blocks. First, we prove that single-qubit quantum neural networks can approximate any univariate function by mapping the model to a partial Fourier series. We in particular establish the exact correlations between the parameters of the trainable gates and the Fourier coefficients, resolving an open problem on the universal approximation property of QNN. Second, we discuss the limitations of single-qubit native QNNs on approximating multivariate functions by analyzing the frequency spectrum and the flexibility of Fourier coefficients. We further demonstrate the expressivity and limitations of single-qubit native QNNs via numerical experiments. We believe these results would improve our understanding of QNNs and provide a helpful guideline for designing powerful QNNs for machine learning tasks.

Correlated electron systems are among the centerpieces of modern condensed matter sciences, where many interesting physical phenomena, such as metal-insulator transition and high-Tc superconductivity appear. Recent efforts have been focused on electrostatic doping of such materials to probe the underlying physics without introducing disorder as well as to build field-effect transistors that may complement conventional semiconductor metal-oxide-semiconductor field effect transistor (MOSFET) technology. This review focuses on metal-insulator transition mechanisms in correlated electron materials and three-terminal field effect devices utilizing such correlated oxides as the channel layer. We first describe how electron-disorder interaction, electron-phonon interaction and/or electron correlation in solids could modify the electronic properties of materials and lead to metal-insulator transitions. Then we analyze experimental efforts toward utilizing these transitions in field effect transistors and their underlying principles. It is pointed out that correlated electron systems show promise among these various materials displaying phase transitions for logic technologies. Furthermore, novel phenomena emerging from electronic correlation could enable new functionalities in field effect devices. We then briefly review unconventional electrostatic gating techniques, such as ionic liquid gating and ferroelectric gating, which enables ultra large carrier accumulation density in the correlated materials which could in turn lead to phase transitions. The review concludes with a brief discussion on the prospects and suggestions for future research directions in correlated oxide electronics for information processing.

We provide a polynomial-time classical algorithm for noisy quantum circuits. The algorithm computes the expectation value of any observable for any circuit, with a small average error over input states drawn from an ensemble (e.g. the computational basis). Our approach is based upon the intuition that noise exponentially damps non-local correlations relative to local correlations. This enables one to classically simulate a noisy quantum circuit by only keeping track of the dynamics of local quantum information. Our algorithm also enables sampling from the output distribution of a circuit in quasi-polynomial time, so long as the distribution anti-concentrates. A number of practical implications are discussed, including a fundamental limit on the efficacy of noise mitigation strategies: for constant noise rates, any quantum circuit for which error mitigation is efficient on most input states, is also classically simulable on most input states.

Bosonic cat qubits stabilized with a driven two-photon dissipation are systems with exponentially biased noise, opening the door to low-overhead, fault-tolerant and universal quantum computing. However, current gate proposals for such qubits induce substantial noise of the unprotected type, whose poor scaling with the relevant experimental parameters limits their practical use. In this work, we provide a new perspective on dissipative cat qubits by reconsidering the reservoir mode used to engineer the tailored two-photon dissipation, and show how it can be leveraged to mitigate gate-induced errors. Doing so, we introduce four new designs of high-fidelity and bias-preserving cat qubit gates, and compare them to the prevalent gate methods. These four designs should give a broad overview of gate engineering for dissipative systems with different and complementary ideas. In particular, we propose both already achievable low-error gate designs and longer-term implementations.

We extend molecular bootstrap embedding to make it appropriate for implementation on a quantum computer. This enables solution of the electronic structure problem of a large molecule as an optimization problem for a composite Lagrangian governing fragments of the total system, in such a way that fragment solutions can harness the capabilities of quantum computers. By employing state-of-art quantum subroutines including the quantum SWAP test and quantum amplitude amplification, we show how a quadratic speedup can be obtained over the classical algorithm, in principle. Utilization of quantum computation also allows the algorithm to match -- at little additional computational cost -- full density matrices at fragment boundaries, instead of being limited to 1-RDMs. Current quantum computers are small, but quantum bootstrap embedding provides a potentially generalizable strategy for harnessing such small machines through quantum fragment matching.

Quantum Computing is a new and exciting field at the intersection of mathematics, computer science and physics. It concerns a utilization of quantum mechanics to improve the efficiency of computation. Here we present a gentle introduction to some of the ideas in quantum computing. The paper begins by motivating the central ideas of quantum mechanics and quantum computation with simple toy models. From there we move on to a formal presentation of the small fraction of (finite dimensional) quantum mechanics that we will need for basic quantum computation. Central notions of quantum architecture (qubits and quantum gates) are described. The paper ends with a presentation of one of the simplest quantum algorithms: Deutsch's algorithm. Our presentation demands neither advanced mathematics nor advanced physics.

This article provides an introduction to surface code quantum computing. We first estimate the size and speed of a surface code quantum computer. We then introduce the concept of the stabilizer, using two qubits, and extend this concept to stabilizers acting on a two-dimensional array of physical qubits, on which we implement the surface code. We next describe how logical qubits are formed in the surface code array and give numerical estimates of their fault-tolerance. We outline how logical qubits are physically moved on the array, how qubit braid transformations are constructed, and how a braid between two logical qubits is equivalent to a controlled-NOT. We then describe the single-qubit Hadamard, S and T operators, completing the set of required gates for a universal quantum computer. We conclude by briefly discussing physical implementations of the surface code. We include a number of appendices in which we provide supplementary information to the main text.

The emerging field of quantum computing has shown it might change how we process information by using the unique principles of quantum mechanics. As researchers continue to push the boundaries of quantum technologies to unprecedented levels, distributed quantum computing raises as an obvious path to explore with the aim of boosting the computational power of current quantum systems. This paper presents a comprehensive survey of the current state of the art in the distributed quantum computing field, exploring its foundational principles, landscape of achievements, challenges, and promising directions for further research. From quantum communication protocols to entanglement-based distributed algorithms, each aspect contributes to the mosaic of distributed quantum computing, making it an attractive approach to address the limitations of classical computing. Our objective is to provide an exhaustive overview for experienced researchers and field newcomers.

The recent development of quantum computing, which uses entanglement, superposition, and other quantum fundamental concepts, can provide substantial processing advantages over traditional computing. These quantum features help solve many complex problems that cannot be solved otherwise with conventional computing methods. These problems include modeling quantum mechanics, logistics, chemical-based advances, drug design, statistical science, sustainable energy, banking, reliable communication, and quantum chemical engineering. The last few years have witnessed remarkable progress in quantum software and algorithm creation and quantum hardware research, which has significantly advanced the prospect of realizing quantum computers. It would be helpful to have comprehensive literature research on this area to grasp the current status and find outstanding problems that require considerable attention from the research community working in the quantum computing industry. To better understand quantum computing, this paper examines the foundations and vision based on current research in this area. We discuss cutting-edge developments in quantum computer hardware advancement and subsequent advances in quantum cryptography, quantum software, and high-scalability quantum computers. Many potential challenges and exciting new trends for quantum technology research and development are highlighted in this paper for a broader debate.

We propose and experimentally demonstrate sequential quantum computing (SQC), a paradigm that utilizes multiple homogeneous or heterogeneous quantum processors in hybrid classical-quantum workflows. In this manner, we are able to overcome the limitations of each type of quantum computer by combining their complementary strengths. Current quantum devices, including analog quantum annealers and digital quantum processors, offer distinct advantages, yet face significant practical constraints when individually used. SQC addresses this by efficient inter-processor transfer of information through bias fields. Consequently, measurement outcomes from one quantum processor are encoded in the initial-state preparation of the subsequent quantum computer. We experimentally validate SQC by solving a combinatorial optimization problem with interactions up to three-body terms. A D-Wave quantum annealer utilizing 678 qubits approximately solves the problem, and an IBM's 156-qubit digital quantum processor subsequently refines the obtained solutions. This is possible via the digital introduction of non-stoquastic counterdiabatic terms unavailable to the analog quantum annealer. The experiment shows a substantial reduction in computational resources and improvement in the quality of the solution compared to the standalone operations of the individual quantum processors. These results highlight SQC as a powerful and versatile approach for addressing complex combinatorial optimization problems, with potential applications in quantum simulation of many-body systems, quantum chemistry, among others.

Quantum circuits -- built from local unitary gates and local measurements -- are a new playground for quantum many-body physics and a tractable setting to explore universal collective phenomena far-from-equilibrium. These models have shed light on longstanding questions about thermalization and chaos, and on the underlying universal dynamics of quantum information and entanglement. In addition, such models generate new sets of questions and give rise to phenomena with no traditional analog, such as new dynamical phases in quantum systems that are monitored by an external observer. Quantum circuit dynamics is also topical in view of experimental progress in building digital quantum simulators that allow control of precisely these ingredients. Randomness in the circuit elements allows a high level of theoretical control, with a key theme being mappings between real-time quantum dynamics and effective classical lattice models or dynamical processes. Many of the universal phenomena that can be identified in this tractable setting apply to much wider classes of more structured many-body dynamics.

We introduce qclab++, a light-weight, fully-templated C++ package for GPU-accelerated quantum circuit simulations. The code offers a high degree of portability as it has no external dependencies and the GPU kernels are generated through OpenMP offloading. qclab++ is designed for performance and numerical stability through highly optimized gate simulation algorithms for 1-qubit, controlled 1-qubit, and 2-qubit gates. Furthermore, we also introduce qclab, a quantum circuit toolbox for Matlab with a syntax that mimics qclab++. This provides users the flexibility and ease of use of a scripting language like Matlab for studying their quantum algorithms, while offering high-performance GPU acceleration when required. As such, the qclab++ library offers a unique combination of features. We compare the CPU simulator in qclab++ with the GPU kernels generated by OpenMP and observe a speedup of over 40times. Furthermore, we also compare qclab++ to other circuit simulation packages, such as cirq-qsim and qibo, in a series of benchmarks conducted on NERSC's Perlmutter system and illustrate its competitiveness.

We present a polynomial-time classical algorithm for estimating expectation values of arbitrary observables on typical quantum circuits under any incoherent local noise, including non-unital or dephasing. Although previous research demonstrated that some carefully designed quantum circuits affected by non-unital noise cannot be efficiently simulated, we show that this does not apply to average-case circuits, as these can be efficiently simulated using Pauli-path methods. Specifically, we prove that, with high probability over the circuit gates choice, Pauli propagation algorithms with tailored truncation strategies achieve an inversely polynomially small simulation error. This result holds for arbitrary circuit topologies and for any local noise, under the assumption that the distribution of each circuit layer is invariant under single-qubit random gates. Under the same minimal assumptions, we also prove that most noisy circuits can be truncated to an effective logarithmic depth for the task of {estimating} expectation values of observables, thus generalizing prior results to a significantly broader class of circuit ensembles. We further numerically validate our algorithm with simulations on a 6times6 lattice of qubits under the effects of amplitude damping and dephasing noise, as well as real-time dynamics on an 11times11 lattice of qubits affected by amplitude damping.

The fundamental trade-off between robustness and tunability is a central challenge in the pursuit of quantum simulation and fault-tolerant quantum computation. In particular, many emerging quantum architectures are designed to achieve high coherence at the expense of having fixed spectra and consequently limited types of controllable interactions. Here, by adiabatically transforming fixed-frequency superconducting circuits into modifiable Floquet qubits, we demonstrate an XXZ Heisenberg interaction with fully adjustable anisotropy. This interaction model is on one hand the basis for many-body quantum simulation of spin systems, and on the other hand the primitive for an expressive quantum gate set. To illustrate the robustness and versatility of our Floquet protocol, we tailor the Heisenberg Hamiltonian and implement two-qubit iSWAP, CZ, and SWAP gates with estimated fidelities of 99.32(3)%, 99.72(2)%, and 98.93(5)%, respectively. In addition, we implement a Heisenberg interaction between higher energy levels and employ it to construct a three-qubit CCZ gate with a fidelity of 96.18(5)%. Importantly, the protocol is applicable to various fixed-frequency high-coherence platforms, thereby unlocking a suite of essential interactions for high-performance quantum information processing. From a broader perspective, our work provides compelling avenues for future exploration of quantum electrodynamics and optimal control using the Floquet framework.

We study the effect of perpendicular magnetic fields on a single-electron system with a strongly time-dependent electrostatic potential. Continuous improvements to the current quantization in these electron pumps are revealed by high-resolution measurements. Simulations show that the sensitivity of tunnel rates to the barrier potential is enhanced, stabilizing particular charge states. Nonadiabatic excitations are also suppressed due to a reduced sensitivity of the Fock-Darwin states to electrostatic potential. The combination of these effects leads to significantly more accurate current quantization.

The second quantum revolution brings with it the promise of a quantum internet. As the first quantum network hardware prototypes near completion new challenges emerge. A functional network is more than just the physical hardware, yet work on scalable quantum network systems is in its infancy. In this paper we present a quantum network protocol designed to enable end-to-end quantum communication in the face of the new fundamental and technical challenges brought by quantum mechanics. We develop a quantum data plane protocol that enables end-to-end quantum communication and can serve as a building block for more complex services. One of the key challenges in near-term quantum technology is decoherence -- the gradual decay of quantum information -- which imposes extremely stringent limits on storage times. Our protocol is designed to be efficient in the face of short quantum memory lifetimes. We demonstrate this using a simulator for quantum networks and show that the protocol is able to deliver its service even in the face of significant losses due to decoherence. Finally, we conclude by showing that the protocol remains functional on the extremely resource limited hardware that is being developed today underlining the timeliness of this work.

Variational quantum eigensolvers (VQEs) are among the most promising quantum algorithms for solving electronic structure problems in quantum chemistry, particularly during the Noisy Intermediate-Scale Quantum (NISQ) era. In this study, we investigate the capabilities and limitations of VQE algorithms implemented on current quantum hardware for determining molecular ground-state energies, focusing on the adaptive derivative-assembled pseudo-Trotter ansatz VQE (ADAPT-VQE). To address the significant computational challenges posed by molecular Hamiltonians, we explore various strategies to simplify the Hamiltonian, optimize the ansatz, and improve classical parameter optimization through modifications of the COBYLA optimizer. These enhancements are integrated into a tailored quantum computing implementation designed to minimize the circuit depth and computational cost. Using benzene as a benchmark system, we demonstrate the application of these optimizations on an IBM quantum computer. Despite these improvements, our results highlight the limitations imposed by current quantum hardware, particularly the impact of quantum noise on state preparation and energy measurement. The noise levels in today's devices prevent meaningful evaluations of molecular Hamiltonians with sufficient accuracy to produce reliable quantum chemical insights. Finally, we extrapolate the requirements for future quantum hardware to enable practical and scalable quantum chemistry calculations using VQE algorithms. This work provides a roadmap for advancing quantum algorithms and hardware toward achieving quantum advantage in molecular modeling.

Conventional semiconductor-based integrated circuits are gradually approaching fundamental scaling limits. Many prospective solutions have recently emerged to supplement or replace both the technology on which basic devices are built and the architecture of data processing. Neuromorphic circuits are a promising approach to computing where techniques used by the brain to achieve high efficiency are exploited. Many existing neuromorphic circuits rely on unconventional and useful properties of novel technologies to better mimic the operation of the brain. One such technology is single flux quantum (SFQ) logic -- a cryogenic superconductive technology in which the data are represented by quanta of magnetic flux (fluxons) produced and processed by Josephson junctions embedded within inductive loops. The movement of a fluxon within a circuit produces a quantized voltage pulse (SFQ pulse), resembling a neuronal spiking event. These circuits routinely operate at clock frequencies of tens to hundreds of gigahertz, making SFQ a natural technology for processing high frequency pulse trains. Prior proposals for SFQ neural networks often require energy-expensive fluxon conversions, involve heterogeneous technologies, or exclusively focus on device level behavior. In this paper, a design methodology for deep single flux quantum neuromorphic networks is presented. Synaptic and neuronal circuits based on SFQ technology are presented and characterized. Based on these primitives, a deep neuromorphic XOR network is evaluated as a case study, both at the architectural and circuit levels, achieving wide classification margins. The proposed methodology does not employ unconventional superconductive devices or semiconductor transistors. The resulting networks are tunable by an external current, making this proposed system an effective approach for scalable cryogenic neuromorphic computing.

Quantum systems of infinite dimension, such as bosonic oscillators, provide vast resources for quantum sensing. Yet, a general theory on how to manipulate such bosonic modes for sensing beyond parameter estimation is unknown. We present a general algorithmic framework, quantum signal processing interferometry (QSPI), for quantum sensing at the fundamental limits of quantum mechanics by generalizing Ramsey-type interferometry. Our QSPI sensing protocol relies on performing nonlinear polynomial transformations on the oscillator's quadrature operators by generalizing quantum signal processing (QSP) from qubits to hybrid qubit-oscillator systems. We use our QSPI sensing framework to make efficient binary decisions on a displacement channel in the single-shot limit. Theoretical analysis suggests the sensing accuracy, given a single-shot qubit measurement, scales inversely with the sensing time or circuit depth of the algorithm. We further concatenate a series of such binary decisions to perform parameter estimation in a bit-by-bit fashion. Numerical simulations are performed to support these statements. Our QSPI protocol offers a unified framework for quantum sensing using continuous-variable bosonic systems beyond parameter estimation and establishes a promising avenue toward efficient and scalable quantum control and quantum sensing schemes beyond the NISQ era.

This paper explores the potential of cryogenic semiconductor computing and superconductor electronics as promising alternatives to traditional semiconductor devices. As semiconductor devices face challenges such as increased leakage currents and reduced performance at higher temperatures, these novel technologies offer high performance and low power computation. Conventional semiconductor electronics operating at cryogenic temperatures (below -150{\deg}C or 123.15 K) can benefit from reduced leakage currents and improved electron mobility. On the other hand, superconductor electronics, operating below 10 K, allow electrons to flow without resistance, offering the potential for ultra-low-power, high-speed computation. This study presents a comprehensive performance modeling and analysis of these technologies and provides insights into their potential benefits and limitations. We implement models of in-order and out-of-order cores operating at high clock frequencies associated with superconductor electronics and cryogenic semiconductor computing in gem5. We evaluate the performance of these components using workloads representative of real-world applications like NPB, SPEC CPU2006, and GAPBS. Our results show the potential speedups achievable by these components and the limitations posed by cache bandwidth. This work provides valuable insights into the performance implications and design trade-offs associated with cryogenic and superconductor technologies, laying the foundation for future research in this field using gem5.

Self-Attention Mechanism (SAM) excels at distilling important information from the interior of data to improve the computational efficiency of models. Nevertheless, many Quantum Machine Learning (QML) models lack the ability to distinguish the intrinsic connections of information like SAM, which limits their effectiveness on massive high-dimensional quantum data. To tackle the above issue, a Quantum Kernel Self-Attention Mechanism (QKSAM) is introduced to combine the data representation merit of Quantum Kernel Methods (QKM) with the efficient information extraction capability of SAM. Further, a Quantum Kernel Self-Attention Network (QKSAN) framework is proposed based on QKSAM, which ingeniously incorporates the Deferred Measurement Principle (DMP) and conditional measurement techniques to release half of quantum resources by mid-circuit measurement, thereby bolstering both feasibility and adaptability. Simultaneously, the Quantum Kernel Self-Attention Score (QKSAS) with an exponentially large characterization space is spawned to accommodate more information and determine the measurement conditions. Eventually, four QKSAN sub-models are deployed on PennyLane and IBM Qiskit platforms to perform binary classification on MNIST and Fashion MNIST, where the QKSAS tests and correlation assessments between noise immunity and learning ability are executed on the best-performing sub-model. The paramount experimental finding is that a potential learning advantage is revealed in partial QKSAN subclasses that acquire an impressive more than 98.05% high accuracy with very few parameters that are much less in aggregate than classical machine learning models. Predictably, QKSAN lays the foundation for future quantum computers to perform machine learning on massive amounts of data while driving advances in areas such as quantum computer vision.

Realizations of gauge theories in setups of quantum synthetic matter open up the possibility of probing salient exotic phenomena in condensed matter and high-energy physics, along with potential applications in quantum information and science technologies. In light of the impressive ongoing efforts to achieve such realizations, a fundamental question regarding quantum link model regularizations of lattice gauge theories is how faithfully they capture the quantum field theory limit of gauge theories. Recent work [Zache, Van Damme, Halimeh, Hauke, and Banerjee, at https://journals.aps.org/prd/abstract/10.1103/PhysRevD.106.L091502 has shown through analytic derivations, exact diagonalization, and infinite matrix product state calculations that the low-energy physics of 1+1D U(1) quantum link models approaches the quantum field theory limit already at small link spin length S. Here, we show that the approach to this limit also lends itself to the far-from-equilibrium quench dynamics of lattice gauge theories, as demonstrated by our numerical simulations of the Loschmidt return rate and the chiral condensate in infinite matrix product states, which work directly in the thermodynamic limit. Similar to our findings in equilibrium that show a distinct behavior between half-integer and integer link spin lengths, we find that criticality emerging in the Loschmidt return rate is fundamentally different between half-integer and integer spin quantum link models in the regime of strong electric-field coupling. Our results further affirm that state-of-the-art finite-size ultracold-atom and NISQ-device implementations of quantum link lattice gauge theories have the real potential to simulate their quantum field theory limit even in the far-from-equilibrium regime.

Accurate determination of qubit parameters is critical for the successful implementation of quantum information and computation applications. In solid state systems, the parameters of individual qubits vary across the entire system, requiring time consuming measurements and manual fitting processes for characterization. Recent developed superconducting qubits, such as fluxonium or 0-pi qubits, offer improved fidelity operations but exhibit a more complex physical and spectral structure, complicating parameter extraction. In this work, we propose a machine learning (ML)based methodology for the automatic and accurate characterization of fluxonium qubit parameters. Our approach utilized the energy spectrum calculated by a model Hamiltonian with various magnetic fields, as training data for the ML model. The output consists of the essential fluxonium qubit energy parameters, EJ, EC, and EL in Hamiltonian. The ML model achieves remarkable accuracy (with an average accuracy 95.6%) as an initial guess, enabling the development of an automatic fitting procedure for direct application to realistic experimental data. Moreover, we demonstrate that similar accuracy can be retrieved even when the input experimental spectrum is noisy or incomplete, highlighting the model robustness. These results suggest that our automated characterization method, based on a transfer learning approach, provides a reliable framework for future extensions to other superconducting qubits or different solid-state systems. Ultimately, we believe this methodology paves the way for the construction of large-scale quantum processors.

The use of quantum computing for machine learning is among the most exciting prospective applications of quantum technologies. However, machine learning tasks where data is provided can be considerably different than commonly studied computational tasks. In this work, we show that some problems that are classically hard to compute can be easily predicted by classical machines learning from data. Using rigorous prediction error bounds as a foundation, we develop a methodology for assessing potential quantum advantage in learning tasks. The bounds are tight asymptotically and empirically predictive for a wide range of learning models. These constructions explain numerical results showing that with the help of data, classical machine learning models can be competitive with quantum models even if they are tailored to quantum problems. We then propose a projected quantum model that provides a simple and rigorous quantum speed-up for a learning problem in the fault-tolerant regime. For near-term implementations, we demonstrate a significant prediction advantage over some classical models on engineered data sets designed to demonstrate a maximal quantum advantage in one of the largest numerical tests for gate-based quantum machine learning to date, up to 30 qubits.

Machine learning and quantum computing are two technologies each with the potential for altering how computation is performed to address previously untenable problems. Kernel methods for machine learning are ubiquitous for pattern recognition, with support vector machines (SVMs) being the most well-known method for classification problems. However, there are limitations to the successful solution to such problems when the feature space becomes large, and the kernel functions become computationally expensive to estimate. A core element to computational speed-ups afforded by quantum algorithms is the exploitation of an exponentially large quantum state space through controllable entanglement and interference. Here, we propose and experimentally implement two novel methods on a superconducting processor. Both methods represent the feature space of a classification problem by a quantum state, taking advantage of the large dimensionality of quantum Hilbert space to obtain an enhanced solution. One method, the quantum variational classifier builds on [1,2] and operates through using a variational quantum circuit to classify a training set in direct analogy to conventional SVMs. In the second, a quantum kernel estimator, we estimate the kernel function and optimize the classifier directly. The two methods present a new class of tools for exploring the applications of noisy intermediate scale quantum computers [3] to machine learning.

Regression is a cornerstone of statistics and machine learning, with applications spanning science, engineering, and economics. While quantum algorithms for regression have attracted considerable attention, most existing work has focused on linear regression, leaving many more complex yet practically important variants unexplored. In this work, we present a unified quantum framework for accelerating a broad class of regression tasks -- including linear and multiple regression, Lasso, Ridge, Huber, ell_p-, and δ_p-type regressions -- achieving up to a quadratic improvement in the number of samples m over the best classical algorithms. This speedup is achieved by extending the recent classical breakthrough of Jambulapati et al. (STOC'24) using several quantum techniques, including quantum leverage score approximation (Apers &Gribling, 2024) and the preparation of many copies of a quantum state (Hamoudi, 2022). For problems of dimension n, sparsity r < n, and error parameter ε, our algorithm solves the problem in O(rmn/ε+ poly(n,1/ε)) quantum time, demonstrating both the applicability and the efficiency of quantum computing in accelerating regression tasks.

In this work, we provide an overview of circuits for quantum computing. We introduce gates used in quantum computation and then present resource cost measurements used to evaluate circuits made from these gates. We then illustrate how the gates shown are then combined into quantum circuits for basic arithmetic functions. Architectures for addition, subtraction, multiplication, and division are shown. We demonstrate how to calculate the resource costs of quantum circuits. We conclude this overview with by illustrating an application of the elementary quantum circuits for the image rotation operation.

Spintronics aims to utilize the spin degree of freedom for information storage and computing applications. One major issue is the generation and detection of spins via spin and charge conversion. Quantum materials have recently exhibited many unique spin-dependent properties, which can be used as promising material candidates for efficient spin and charge conversion. Here, we review recent findings concerning spin and charge conversion in quantum materials, including Rashba interfaces, topological insulators, two-dimensional materials, superconductors, and non-collinear antiferromagnets. Important progress in using quantum materials for spin and charge conversion could pave the way for developing future spintronics devices.

Quantum computing is powerful because unitary operators describing the time-evolution of a quantum system have exponential size in terms of the number of qubits present in the system. We develop a new "Singular value transformation" algorithm capable of harnessing this exponential advantage, that can apply polynomial transformations to the singular values of a block of a unitary, generalizing the optimal Hamiltonian simulation results of Low and Chuang. The proposed quantum circuits have a very simple structure, often give rise to optimal algorithms and have appealing constant factors, while usually only use a constant number of ancilla qubits. We show that singular value transformation leads to novel algorithms. We give an efficient solution to a certain "non-commutative" measurement problem and propose a new method for singular value estimation. We also show how to exponentially improve the complexity of implementing fractional queries to unitaries with a gapped spectrum. Finally, as a quantum machine learning application we show how to efficiently implement principal component regression. "Singular value transformation" is conceptually simple and efficient, and leads to a unified framework of quantum algorithms incorporating a variety of quantum speed-ups. We illustrate this by showing how it generalizes a number of prominent quantum algorithms, including: optimal Hamiltonian simulation, implementing the Moore-Penrose pseudoinverse with exponential precision, fixed-point amplitude amplification, robust oblivious amplitude amplification, fast QMA amplification, fast quantum OR lemma, certain quantum walk results and several quantum machine learning algorithms. In order to exploit the strengths of the presented method it is useful to know its limitations too, therefore we also prove a lower bound on the efficiency of singular value transformation, which often gives optimal bounds.

Transitions among quantum Hall plateaux share a suite of remarkable experimental features, such as semi-circle laws and duality relations, whose accuracy and robustness are difficult to explain directly in terms of the detailed dynamics of the microscopic electrons. They would naturally follow if the low-energy transport properties were governed by an emergent discrete duality group relating the different plateaux, but no explicit examples of interacting systems having such a group are known. Recent progress using the AdS/CFT correspondence has identified examples with similar duality groups, but without the DC ohmic conductivity characteristic of quantum Hall experiments. We use this to propose a simple holographic model for low-energy quantum Hall systems, with a nonzero DC conductivity that automatically exhibits all of the observed consequences of duality, including the existence of the plateaux and the semi-circle transitions between them. The model can be regarded as a strongly coupled analog of the old `composite boson' picture of quantum Hall systems. Non-universal features of the model can be used to test whether it describes actual materials, and we comment on some of these in our proposed model.

We introduce the generative quantum eigensolver (GQE), a new quantum computational framework that operates outside the variational quantum algorithm paradigm by applying classical generative models to quantum simulation. The GQE algorithm optimizes a classical generative model to produce quantum circuits with desired properties. Here, we develop a transformer-based implementation, which we name the generative pre-trained transformer-based (GPT) quantum eigensolver (GPT-QE). We show a proof-of-concept of training and pretraining of GPT-QE applied to electronic structure Hamiltonians, and demonstrate its ability illustrated by surpassing coupled cluster singles and doubles (CCSD) for the strong bond dissociation of the nitrogen molecule and approaching chemical accuracy. We also demonstrate the method on real quantum hardware.

High-performance computing (HPC) is increasingly important for scalable quantum chemistry workflows that couple classical generative models, quantum circuit simulation, and selected configuration interaction postprocessing. We present the generative quantum-inspired Kolmogorov-Arnold eigensolver (GQKAE), a parameter-efficient extension of the generative quantum eigensolver (GQE) for quantum chemistry. GQKAE replaces the parameter-heavy feed-forward network components in GPT-style generative eigensolvers with hybrid quantum-inspired Kolmogorov-Arnold network modules, forming a compact HQKANsformer backbone. The method preserves autoregressive operator selection and the quantum-selected configuration interaction evaluation pipeline, while using single-qubit DatA Re-Uploading ActivatioN modules to provide expressive nonlinear mappings. Numerical benchmarks on H4, N2, LiH, C2H6, H2O, and the H2O dimer show that GQKAE achieves chemical accuracy comparable to the GPT-based GQE architecture, while reducing trainable parameters and memory by approximately 66% and improving wall-time performance. For strongly correlated systems such as N2 and LiH, GQKAE also improves convergence behavior and final energy errors. These results indicate that quantum-inspired Kolmogorov-Arnold networks can reduce classical-side overhead while preserving circuit-generation quality, offering a scalable route for HPC-quantum co-design on near-term quantum platforms.

The intrinsic probabilistic nature of quantum systems makes error correction or mitigation indispensable for quantum computation. While current error-correcting strategies focus on correcting errors in quantum states or quantum gates, these fine-grained error-correction methods can incur significant overhead for quantum algorithms of increasing complexity. We present a first step in achieving error correction at the level of quantum algorithms by combining a unified perspective on modern quantum algorithms via quantum signal processing (QSP). An error model of under- or over-rotation of the signal processing operator parameterized by epsilon < 1 is introduced. It is shown that while Pauli Z-errors are not recoverable without additional resources, Pauli X and Y errors can be arbitrarily suppressed by coherently appending a noisy `recovery QSP.' Furthermore, it is found that a recovery QSP of length O(2^k c^{k^2} d) is sufficient to correct any length-d QSP with c unique phases to k^{th}-order in error epsilon. Allowing an additional assumption, a lower bound of Omega(cd) is shown, which is tight for k = 1, on the length of the recovery sequence. Our algorithmic-level error correction method is applied to Grover's fixed-point search algorithm as a demonstration.

Quantum computation is an emerging technology with important potential for solving certain problems pivotal in various scientific and engineering disciplines. This paper introduces an efficient quantum protocol for the explicit construction of the block-encoding for an important class of Hamiltonians. Using the Schrodingerisation technique -- which converts non-conservative PDEs into conservative ones -- this particular class of Hamiltonians is shown to be sufficient for simulating any linear partial differential equations that have coefficients which are polynomial functions. The class of Hamiltonians consist of discretisations of polynomial products and sums of position and momentum operators. This construction is explicit and leverages minimal one- and two-qubit operations. The explicit construction of this block-encoding forms a fundamental building block for constructing the unitary evolution operator for this Hamiltonian. The proposed algorithm exhibits polynomial scaling with respect to the spatial partitioning size, suggesting an exponential speedup over classical finite-difference methods. This work provides an important foundation for building explicit and efficient quantum circuits for solving partial differential equations.

The use of kernel functions is a common technique to extract important features from data sets. A quantum computer can be used to estimate kernel entries as transition amplitudes of unitary circuits. Quantum kernels exist that, subject to computational hardness assumptions, cannot be computed classically. It is an important challenge to find quantum kernels that provide an advantage in the classification of real-world data. We introduce a class of quantum kernels that can be used for data with a group structure. The kernel is defined in terms of a unitary representation of the group and a fiducial state that can be optimized using a technique called kernel alignment. We apply this method to a learning problem on a coset-space that embodies the structure of many essential learning problems on groups. We implement the learning algorithm with 27 qubits on a superconducting processor.

Transformers have gained popularity in machine learning due to their application in the field of natural language processing. They manipulate and process text efficiently, capturing long-range dependencies among data and performing the next word prediction. On the other hand, gate-based quantum computing is based on controlling the register of qubits in the quantum hardware by applying a sequence of gates, a process which can be interpreted as a low level text programming language. We develop a transformer model capable of transpiling quantum circuits from the qasm standard to other sets of gates native suited for a specific target quantum hardware, in our case the set for the trapped-ion quantum computers of IonQ. The feasibility of a translation up to five qubits is demonstrated with a percentage of correctly transpiled target circuits equal or superior to 99.98%. Regardless the depth of the register and the number of gates applied, we prove that the complexity of the transformer model scales, in the worst case scenario, with a polynomial trend by increasing the depth of the register and the length of the circuit, allowing models with a higher number of parameters to be efficiently trained on HPC infrastructures.

Quantum computers offer a new paradigm of computing with the potential to vastly outperform any imagineable classical computer. This has caused a gold rush towards new quantum algorithms and hardware. In light of the growing expectations and hype surrounding quantum computing we ask the question which are the promising applications to realize quantum advantage. We argue that small data problems and quantum algorithms with super-quadratic speedups are essential to make quantum computers useful in practice. With these guidelines one can separate promising applications for quantum computing from those where classical solutions should be pursued. While most of the proposed quantum algorithms and applications do not achieve the necessary speedups to be considered practical, we already see a huge potential in material science and chemistry. We expect further applications to be developed based on our guidelines.

As scanning tunneling microscopy is pushed towards fast local dynamics, a quantitative understanding of tunnel junctions under the influence of a fast AC driving signal is required, especially at the ultra-low temperatures relevant to spin dynamics and correlated electron states. We subject a superconductor-insulator-superconductor junction to a microwave signal from an antenna mounted in situ and examine the DC response of the contact to this driving signal. Quasi-particle tunneling and the Josephson effect can be interpreted in the framework of Tien-Gordon theory. The situation is more complex when it comes to higher order effects such as multiple Andreev reflections. Microwave assisted tunneling unravel these complex processes, providing deeper insights into tunneling than are available in a pure DC measurement.

Preparing the ground state of a given Hamiltonian and estimating its ground energy are important but computationally hard tasks. However, given some additional information, these problems can be solved efficiently on a quantum computer. We assume that an initial state with non-trivial overlap with the ground state can be efficiently prepared, and the spectral gap between the ground energy and the first excited energy is bounded from below. With these assumptions we design an algorithm that prepares the ground state when an upper bound of the ground energy is known, whose runtime has a logarithmic dependence on the inverse error. When such an upper bound is not known, we propose a hybrid quantum-classical algorithm to estimate the ground energy, where the dependence of the number of queries to the initial state on the desired precision is exponentially improved compared to the current state-of-the-art algorithm proposed in [Ge et al. 2019]. These two algorithms can then be combined to prepare a ground state without knowing an upper bound of the ground energy. We also prove that our algorithms reach the complexity lower bounds by applying it to the unstructured search problem and the quantum approximate counting problem.

Recently, sample-based quantum diagonalization (SQD) has emerged as a promising approach to compute ground and excited states of problem Hamiltonians.This method classically diagonalizes a Hamiltonian in a subspace that is spanned by samples obtained from a quantum computer. However, by its nature, SQD suffers from a fundamental sampling problem, as some basis states that are required for a targeted accuracy may only be sampled extremely rarely. To alleviate this limitation, we introduce the SQD-AA algorithm that combines SQD with amplitude amplification (AA). SQD-AA uses AA to sequentially reduce probabilities of already measured bitstrings, thus making the observation of new ones more likely. We observe a reduction in the total query complexity of more than a factor 100 for algebraically and exponentially decaying model distributions, and analytically show a quadratic advantage for the latter. Moreover, we evaluate real molecules in an early fault-tolerant scenario and compare SQD-AA to SQD and iterative quantum phase estimation (iQPE). For all considered examples, we observe the lowest total number of T-gates for SQD-AA while only requiring circuits that are 3-4 orders of magnitude shallower than those needed for iQPE. Given this substantial reduction in circuit depth compared to iQPE while saving 2 orders of magnitude in total runtime compared to SQD, we expect a significant regime in early fault-tolerance where SQD-AA runs feasibly, but iQPE circuits are too deep to execute confidently.

Photonics is the platform of choice to build a modular, easy-to-network quantum computer operating at room temperature. However, no concrete architecture has been presented so far that exploits both the advantages of qubits encoded into states of light and the modern tools for their generation. Here we propose such a design for a scalable and fault-tolerant photonic quantum computer informed by the latest developments in theory and technology. Central to our architecture is the generation and manipulation of three-dimensional hybrid resource states comprising both bosonic qubits and squeezed vacuum states. The proposal enables exploiting state-of-the-art procedures for the non-deterministic generation of bosonic qubits combined with the strengths of continuous-variable quantum computation, namely the implementation of Clifford gates using easy-to-generate squeezed states. Moreover, the architecture is based on two-dimensional integrated photonic chips used to produce a qubit cluster state in one temporal and two spatial dimensions. By reducing the experimental challenges as compared to existing architectures and by enabling room-temperature quantum computation, our design opens the door to scalable fabrication and operation, which may allow photonics to leap-frog other platforms on the path to a quantum computer with millions of qubits.

This work describes the theoretical foundation for all quantum chemistry functionality in PennyLane, a quantum computing software library specializing in quantum differentiable programming. We provide an overview of fundamental concepts in quantum chemistry, including the basic principles of the Hartree-Fock method. A flagship feature in PennyLane is the differentiable Hartree-Fock solver, allowing users to compute exact gradients of molecular Hamiltonians with respect to nuclear coordinates and basis set parameters. PennyLane provides specialized operations for quantum chemistry, including excitation gates as Givens rotations and templates for quantum chemistry circuits. Moreover, built-in simulators exploit sparse matrix techniques for representing molecular Hamiltonians that lead to fast simulation for quantum chemistry applications. In combination with PennyLane's existing methods for constructing, optimizing, and executing circuits, these methods allow users to implement a wide range of quantum algorithms for quantum chemistry. We discuss how PennyLane can be used to implement variational algorithms for calculating ground-state energies, excited-state energies, and energy derivatives, all of which can be differentiated with respect to both circuit and Hamiltonian parameters. We provide an example workflow describing how to jointly optimize circuit parameters, nuclear coordinates, and basis set parameters for quantum chemistry algorithms. We discuss a functionality for reducing the number of qubits by using symmetries and explain how PennyLane can be used to estimate quantum resources needed to implement several quantum algorithms. By combining insights from quantum computing, computational chemistry, and machine learning, PennyLane is the first library for differentiable quantum computational chemistry.

The ambition of harnessing the quantum for computation is at odds with the fundamental phenomenon of decoherence. The purpose of quantum error correction (QEC) is to counteract the natural tendency of a complex system to decohere. This cooperative process, which requires participation of multiple quantum and classical components, creates a special type of dissipation that removes the entropy caused by the errors faster than the rate at which these errors corrupt the stored quantum information. Previous experimental attempts to engineer such a process faced an excessive generation of errors that overwhelmed the error-correcting capability of the process itself. Whether it is practically possible to utilize QEC for extending quantum coherence thus remains an open question. We answer it by demonstrating a fully stabilized and error-corrected logical qubit whose quantum coherence is significantly longer than that of all the imperfect quantum components involved in the QEC process, beating the best of them with a coherence gain of G = 2.27 pm 0.07. We achieve this performance by combining innovations in several domains including the fabrication of superconducting quantum circuits and model-free reinforcement learning.

We introduce a quantum neural network, QNN, that can represent labeled data, classical or quantum, and be trained by supervised learning. The quantum circuit consists of a sequence of parameter dependent unitary transformations which acts on an input quantum state. For binary classification a single Pauli operator is measured on a designated readout qubit. The measured output is the quantum neural network's predictor of the binary label of the input state. First we look at classifying classical data sets which consist of n-bit strings with binary labels. The input quantum state is an n-bit computational basis state corresponding to a sample string. We show how to design a circuit made from two qubit unitaries that can correctly represent the label of any Boolean function of n bits. For certain label functions the circuit is exponentially long. We introduce parameter dependent unitaries that can be adapted by supervised learning of labeled data. We study an example of real world data consisting of downsampled images of handwritten digits each of which has been labeled as one of two distinct digits. We show through classical simulation that parameters can be found that allow the QNN to learn to correctly distinguish the two data sets. We then discuss presenting the data as quantum superpositions of computational basis states corresponding to different label values. Here we show through simulation that learning is possible. We consider using our QNN to learn the label of a general quantum state. By example we show that this can be done. Our work is exploratory and relies on the classical simulation of small quantum systems. The QNN proposed here was designed with near-term quantum processors in mind. Therefore it will be possible to run this QNN on a near term gate model quantum computer where its power can be explored beyond what can be explored with simulation.

Machine learning techniques are essential tools to compute efficient, yet accurate, force fields for atomistic simulations. This approach has recently been extended to incorporate quantum computational methods, making use of variational quantum learning models to predict potential energy surfaces and atomic forces from ab initio training data. However, the trainability and scalability of such models are still limited, due to both theoretical and practical barriers. Inspired by recent developments in geometric classical and quantum machine learning, here we design quantum neural networks that explicitly incorporate, as a data-inspired prior, an extensive set of physically relevant symmetries. We find that our invariant quantum learning models outperform their more generic counterparts on individual molecules of growing complexity. Furthermore, we study a water dimer as a minimal example of a system with multiple components, showcasing the versatility of our proposed approach and opening the way towards larger simulations. Our results suggest that molecular force fields generation can significantly profit from leveraging the framework of geometric quantum machine learning, and that chemical systems represent, in fact, an interesting and rich playground for the development and application of advanced quantum machine learning tools.

This paper envisions a quantum database (Qute) that treats quantum computation as a first-class execution option. Unlike prior simulation-based methods that either run quantum algorithms on classical machines or adapt existing databases for quantum simulation, Qute instead (i) compiles an extended form of SQL into gate-efficient quantum circuits, (ii) employs a hybrid optimizer to dynamically select between quantum and classical execution plans, (iii) introduces selective quantum indexing, and (iv) designs fidelity-preserving storage to mitigate current qubit constraints. We also present a three-stage evolution roadmap toward quantum-native database. Finally, by deploying Qute on a real quantum processor (origin_wukong), we show that it outperforms a classical baseline at scale, and we release an open-source prototype at https://github.com/weAIDB/Qute.

Here we investigate the role of quantum interference in the quantum homogenizer, whose convergence properties model a thermalization process. In the original quantum homogenizer protocol, a system qubit converges to the state of identical reservoir qubits through partial-swap interactions, that allow interference between reservoir qubits. We design an alternative, incoherent quantum homogenizer, where each system-reservoir interaction is moderated by a control qubit using a controlled-swap interaction. We show that our incoherent homogenizer satisfies the essential conditions for homogenization, being able to transform a qubit from any state to any other state to arbitrary accuracy, with negligible impact on the reservoir qubits' states. Our results show that the convergence properties of homogenization machines that are important for modelling thermalization are not dependent on coherence between qubits in the homogenization protocol. We then derive bounds on the resources required to re-use the homogenizers for performing state transformations. This demonstrates that both homogenizers are universal for any number of homogenizations, for an increased resource cost.

We revisit quantum phase estimation algorithms for the purpose of obtaining the energy levels of many-body Hamiltonians and pay particular attention to the statistical analysis of their outputs. We introduce the mean phase direction of the parent distribution associated with eigenstate inputs as a new post-processing tool. By connecting it with the unknown phase, we find that if used as its direct estimator, it exceeds the accuracy of the standard majority rule using one less bit of resolution, making evident that it can also be inverted to provide unbiased estimation. Moreover, we show how to directly use this quantity to accurately find the energy levels when the initialized state is an eigenstate of the simulated propagator during the whole time evolution, which allows for shallower algorithms. We then use IBM Q hardware to carry out the digital quantum simulation of three toy models: a two-level system, a two-spin Ising model and a two-site Hubbard model at half-filling. Methodologies are provided to implement Trotterization and reduce the variability of results in noisy intermediate scale quantum computers.

The last few years have seen significant experimental progress in characterizing the copper-based hole-doped high temperature superconductors in the regime of low hole density, p. Quantum oscillations, NMR, X-ray, and STM experiments have shed much light on the nature of the ordering at low temperatures. We review evidence that the order parameter in the non-Lanthanum-based cuprates is a d-form factor density-wave. This novel order acts as an unexpected window into the electronic structure of the pseudogap phase at higher temperatures in zero field: we argue in favor of a `fractionalized Fermi liquid' (FL*) with 4 pockets of spin S=1/2, charge +e fermions enclosing an area specified by p.

Kernel methods in Quantum Machine Learning (QML) have recently gained significant attention as a potential candidate for achieving a quantum advantage in data analysis. Among other attractive properties, when training a kernel-based model one is guaranteed to find the optimal model's parameters due to the convexity of the training landscape. However, this is based on the assumption that the quantum kernel can be efficiently obtained from quantum hardware. In this work we study the performance of quantum kernel models from the perspective of the resources needed to accurately estimate kernel values. We show that, under certain conditions, values of quantum kernels over different input data can be exponentially concentrated (in the number of qubits) towards some fixed value. Thus on training with a polynomial number of measurements, one ends up with a trivial model where the predictions on unseen inputs are independent of the input data. We identify four sources that can lead to concentration including: expressivity of data embedding, global measurements, entanglement and noise. For each source, an associated concentration bound of quantum kernels is analytically derived. Lastly, we show that when dealing with classical data, training a parametrized data embedding with a kernel alignment method is also susceptible to exponential concentration. Our results are verified through numerical simulations for several QML tasks. Altogether, we provide guidelines indicating that certain features should be avoided to ensure the efficient evaluation of quantum kernels and so the performance of quantum kernel methods.

We present quantum circuits to implement an exhaustive key search for the Advanced Encryption Standard (AES) and analyze the quantum resources required to carry out such an attack. We consider the overall circuit size, the number of qubits, and the circuit depth as measures for the cost of the presented quantum algorithms. Throughout, we focus on Clifford+T gates as the underlying fault-tolerant logical quantum gate set. In particular, for all three variants of AES (key size 128, 192, and 256 bit) that are standardized in FIPS-PUB 197, we establish precise bounds for the number of qubits and the number of elementary logical quantum gates that are needed to implement Grover's quantum algorithm to extract the key from a small number of AES plaintext-ciphertext pairs.

Quantum Fourier analysis is an important topic in mathematical physics. We introduce a systematic protocol for testing and measuring ``magic'' in quantum states and gates, using a quantum Fourier approach. Magic, as a quantum resource, is necessary to achieve a quantum advantage in computation. Our protocols are based on quantum convolutions and swap tests, implemented via quantum circuits. We describe this for both qubit and qudit systems. Our quantum Fourier approach offers a unified method to quantify magic, in stabilizer circuits, as well as in matchgate and bosonic Gaussian circuits.

Recently, Hastings & Haah introduced a quantum memory defined on the honeycomb lattice. Remarkably, this honeycomb code assembles weight-six parity checks using only two-local measurements. The sparse connectivity and two-local measurements are desirable features for certain hardware, while the weight-six parity checks enable robust performance in the circuit model. In this work, we quantify the robustness of logical qubits preserved by the honeycomb code using a correlated minimum-weight perfect-matching decoder. Using Monte Carlo sampling, we estimate the honeycomb code's threshold in different error models, and project how efficiently it can reach the "teraquop regime" where trillions of quantum logical operations can be executed reliably. We perform the same estimates for the rotated surface code, and find a threshold of 0.2%-0.3% for the honeycomb code compared to a threshold of 0.5%-0.7% for the surface code in a controlled-not circuit model. In a circuit model with native two-body measurements, the honeycomb code achieves a threshold of 1.5% < p <2.0%, where p is the collective error rate of the two-body measurement gate - including both measurement and correlated data depolarization error processes. With such gates at a physical error rate of 10^{-3}, we project that the honeycomb code can reach the teraquop regime with only 600 physical qubits.

We introduce a simple algorithm that efficiently computes tensor products of Pauli matrices. This is done by tailoring the calculations to this specific case, which allows to avoid unnecessary calculations. The strength of this strategy is benchmarked against state-of-the-art techniques, showing a remarkable acceleration. As a side product, we provide an optimized method for one key calculus in quantum simulations: the Pauli basis decomposition of Hamiltonians.

Photon loss and dephasing rapidly degrade the sensitivity of quantum sensors, yet systematic methods for designing error-correcting codes whose geometry is simultaneously adapted to the sensing task and the noise channel do not exist. Here we establish that orbital-angular-momentum (OAM) encoding and Gottesman-Kitaev-Preskill (GKP) lattice geometry are structurally coupled: an OAM mode of topological charge ell induces a phase-space rotation θ_ell=ellπ/ell_{max}, corresponding to a family of twisted GKP stabilizer lattices. Using an end-to-end differentiable Strawberry Fields--TensorFlow circuit, we jointly optimise ell, the lattice aspect ratio r, and the finite-energy envelope ε to maximise quantum Fisher information subject to P_{rm err}leq10^{-3}. The optimum occurs at the fractional charge ell=1.5 (θ=67.5^circ), implementable with a half-integer spiral phase plate, which reduces P_{rm err} by 23.9times relative to the square-lattice baseline while leaving F_Q unchanged to within 0.2%. This surpasses the best integer value (ell=2, 15.7times) and arises from an exact 180^circ periodicity of the P_{rm err}(θ) landscape, confirmed analytically and numerically. We derive a transcendental balance equation for the optimal angle θ^*(η,γ,r) and prove that it decreases with both γ and η. A Shannon-inspired metrological capacity C=F_Qcdot(-ln P_{rm err}), maximised at ell=1.5 with a 41% gain over the square lattice, quantifies the joint sensitivity--fault-tolerance resource. These results establish a geometric design principle for noise-adaptive quantum sensors and a fully open-source differentiable template extensible to other bosonic code families.

Machine learning is a promising application of quantum computing, but challenges remain as near-term devices will have a limited number of physical qubits and high error rates. Motivated by the usefulness of tensor networks for machine learning in the classical context, we propose quantum computing approaches to both discriminative and generative learning, with circuits based on tree and matrix product state tensor networks that could have benefits for near-term devices. The result is a unified framework where classical and quantum computing can benefit from the same theoretical and algorithmic developments, and the same model can be trained classically then transferred to the quantum setting for additional optimization. Tensor network circuits can also provide qubit-efficient schemes where, depending on the architecture, the number of physical qubits required scales only logarithmically with, or independently of the input or output data sizes. We demonstrate our proposals with numerical experiments, training a discriminative model to perform handwriting recognition using a optimization procedure that could be carried out on quantum hardware, and testing the noise resilience of the trained model.

Quantum computing has gained a lot of attention recently, and scientists have seen potential applications in this field using quantum computing for Cryptography and Communication to Machine Learning and Healthcare. Protein folding has been one of the most interesting areas to study, and it is also one of the biggest problems of biochemistry. Each protein folds distinctively, and the difficulty of finding its stable shape rapidly increases with an increase in the number of amino acids in the chain. A moderate protein has about 100 amino acids, and the number of combinations one needs to verify to find the stable structure is enormous. At some point, the number of these combinations will be so vast that classical computers cannot even attempt to solve them. In this paper, we examine how this problem can be solved with the help of quantum computing using two different algorithms, Variational Quantum Eigensolver (VQE) and Quantum Approximate Optimization Algorithm (QAOA), using Qiskit Nature. We compare the results of different quantum hardware and simulators and check how error mitigation affects the performance. Further, we make comparisons with SoTA algorithms and evaluate the reliability of the method.

We explore the consequences of multi-trace deformations in applications of gauge-gravity duality to condensed matter physics. We find that they introduce a powerful new "knob" that can implement spontaneous symmetry breaking, and can be used to construct a new type of holographic superconductor. This knob can be tuned to drive the critical temperature to zero, leading to a new quantum critical point. We calculate nontrivial critical exponents, and show that fluctuations of the order parameter are `locally' quantum critical in the disordered phase. Most notably the dynamical critical exponent is determined by the dimension of an operator at the critical point. We argue that the results are robust against quantum corrections and discuss various generalizations.

Quantum random access memory (QRAM) enables efficient classical data access for quantum computers -- a prerequisite for many quantum algorithms to achieve quantum speedup. Despite various proposals, the experimental realization of QRAM remains largely unexplored. Here, we experimentally investigate the circuit-based bucket-brigade QRAM with a superconducting quantum processor. To facilitate the experimental implementation, we introduce a hardware-efficient gate decomposition scheme for quantum routers, which effectively reduces the depth of the QRAM circuit by more than 30% compared to the conventional controlled-SWAP-based implementation. We further propose an error mitigation method to boost the QRAM query fidelity. With these techniques, we are able to experimentally implement the QRAM architectures with two and three layers, achieving query fidelities up to 0.800 pm 0.026 and 0.604pm0.005, respectively. Additionally, we study the error propagation mechanism and the scalability of our QRAM implementation, providing experimental evidence for the noise resilience nature of the bucket-brigade QRAM architecture. Our results highlight the potential of superconducting quantum processors for realizing a scalable QRAM architecture.

Energy consumption in solving computational problems has been gaining growing attention as a part of the performance measures of computers. Quantum computation is known to offer advantages over classical computation in terms of various computational resources; however, its advantage in energy consumption has been challenging to analyze due to the lack of a theoretical foundation to relate the physical notion of energy and the computer-scientific notion of complexity for quantum computation with finite computational resources. To bridge this gap, we introduce a general framework for studying the energy consumption of quantum and classical computation based on a computational model that has been conventionally used for studying query complexity in computational complexity theory. With this framework, we derive an upper bound for the achievable energy consumption of quantum computation. We also develop techniques for proving a nonzero lower bound of energy consumption of classical computation based on the energy-conservation law and Landauer's principle. With these general bounds, we rigorously prove that quantum computation achieves an exponential energy-consumption advantage over classical computation for solving a specific computational problem, Simon's problem. Furthermore, we clarify how to demonstrate this energy-consumption advantage of quantum computation in an experimental setting. These results provide a fundamental framework and techniques to explore the physical meaning of quantum advantage in the query-complexity setting based on energy consumption, opening an alternative way to study the advantages of quantum computation.

High-accuracy microwave sensing is widely demanded in various fields, ranging from cosmology to microwave quantum technology. Quantum receivers based on inorganic solid-state spin systems are promising candidates for such purpose because of the stability and compatibility, but their best sensitivity is currently limited to a few pT/rm{Hz}. Here, by utilising an enhanced readout scheme with the state-of-the-art solid-state maser technology, we develop a robust microwave quantum receiver functioned by organic molecular spins at ambient conditions. Owing to the maser amplification, the sensitivity of the receiver achieves 6.14 pm 0.17 fT/rm{Hz} which exceeds three orders of magnitude than that of the inorganic solid-state quantum receivers. The heterodyne detection without additional local oscillators improves bandwidth of the receiver and allows frequency detection. The scheme can be extended to other solid-state spin systems without complicated control pulses and thus enables practical applications such as electron spin resonance spectroscopy, dark matter searches, and astronomical observations.

Experiments in recent years on high T_c superconductors find a puzzling nodal scale-covariant self-energy with an exponent varying continuously with doping. We propose a mechanism: nonlocality induced by poorly screened effective repulsions V_α(r) sim 1/r^α, where a continuously doping-dependent exponent 1 le αle 3 naturally interpolates between the Mott insulating and Fermi liquid limits. We develop a phenomenology of hydrodynamic screening, finding a scale-covariant quasiparticle decay rate Γ(ω,T) propto T^γ Φ(ω/T) in energy ω and temperature T, with γ= 2-1α for nonlocal 1 < α< 2. Our results naturally capture the optimally doped to overdoped regimes, whereas the underdoped regime is qualitatively distinct. In our theory, spectroscopy-fitted exponents directly probe the charged fluid's effective spatial nonlocality. Nonlocality shows that quantum criticality is not necessary to explain scale-covariant phenomena.

The quantum advantage threshold determines when a quantum processing unit (QPU) is more efficient with respect to classical computing hardware in terms of algorithmic complexity. The "green" quantum advantage threshold - based on a comparison of energetic efficiency between the two - is going to play a fundamental role in the comparison between quantum and classical hardware. Indeed, its characterization would enable better decisions on energy-saving strategies, e.g. for distributing the workload in hybrid quantum-classical algorithms. Here, we show that the green quantum advantage threshold crucially depends on (i) the quality of the experimental quantum gates and (ii) the entanglement generated in the QPU. Indeed, for NISQ hardware and algorithms requiring a moderate amount of entanglement, a classical tensor network emulation can be more energy-efficient at equal final state fidelity than quantum computation. We compute the green quantum advantage threshold for a few paradigmatic examples in terms of algorithms and hardware platforms, and identify algorithms with a power-law decay of singular values of bipartitions - with power-law exponent alpha lesssim 1 - as the green quantum advantage threshold in the near future.