Daily Papers

World action models improve robotic manipulation by conditioning actions on predicted futures, yet existing tactile variants largely inherit video-generation pipelines that reconstruct future tactile observations through iterative denoising. Such prediction can become unreliable under deployment drift: small changes in contact position or force may substantially alter tactile pixels even when the underlying contact evolution remains predictable. We introduce TacDyn-WAM, a heterogeneous visuo-tactile world action model that predicts implicit tactile dynamics rather than reconstructing future tactile observations. It learns TacRep, a dynamics-aware tactile target space trained through masked spatio-temporal prediction on tactile clips and regularized by relational structure distillation. A visual expert and an Implicit Tactile Dynamics Expert predict future visual and tactile representations in separate target spaces while interacting through joint attention; the tactile expert predicts future representations and their changes at multiple horizons in a single forward pass, and a read-only tactile memory supplies the current tactile state. On UniVTAC, TacDyn-WAM achieves an average success rate of 81.5% using only the provided demonstrations, reaching state-of-the-art-level performance and remaining competitive with models pretrained on large-scale visuo-tactile trajectories. Ablations confirm the benefits of both tactile pathways and TacRep over pixel-reconstruction and static alternatives. On five real-robot tasks, TacDyn-WAM reaches 71.0% average success, and modest-scale pretraining raises it to 85.0%, further validating our method.

In contact-rich manipulation, contact conditions can change before a visual policy updates its action plan. Recomputing the plan through the visual policy adds latency, while tactile feedback alone does not specify how the ongoing motion should be revised for the task. We introduce T-WLA, a world-language-action architecture that uses shared visual memory to guide both action generation and tactile correction. At each visual update, the visual branch integrates the current image, task instruction, and retrieved history into a visual memory that conditions base-action generation. The same memory is cached for a lightweight tactile editor, which combines it with the active action chunk and incoming touch to predict residual corrections to unexecuted actions without rerunning the visual branch. Future-image and future-pressure prediction provide training-only supervision, encouraging the visual memory and tactile features to capture interaction dynamics relevant to action generation and correction. We evaluate T-WLA on tactile-conditioned hand-motion prediction using EgoTouch and Tachin, and on four real-world dexterous manipulation tasks. T-WLA reduces finger-joint MPJPE by 30% relative to the strongest reported baseline and achieves an average success rate of approximately 50.0% across real-robot manipulation tasks. Videos and code are available at https://anonymous-submission-20.github.io/T-WLA.github.io/.

Resistive pressure arrays are the cheapest and most widely shipped tactile sensors, yet tactile representation learning has concentrated on optical sensors that image a deforming gel. We present Tactus, an open model that answers text queries from pressure data alone: on the STAG benchmark (27 objects, held-out recordings), it reaches 0.771 +/- 0.062 top-1 over four runs (top-3 0.935), matching, and at best exceeding, the dataset's supervised closed-set CNN at 0.76, with no trained classifier head. The recipe is small-data: 187 training recordings, masked-autoencoder pretraining on 144k unlabeled same-sensor frames, and the sensor's own calibration affine, which recovered more accuracy than every architecture change combined. The released model's errors concentrate in a few contact-ambiguous classes, are uncorrelated with text-target geometry (Spearman rho <= 0.05 over 702 class pairs), and survive paraphrased and even bare-name queries within one point; two diverse frames recover 89% of eight-frame accuracy. Failures are reported with equal precision: cross-sensor pretraining pooling gave no gain, vision co-training degraded touch, and a mis-normalized input pipeline silently discarded 97% of the sensor's dynamic range while producing plausible intermediate results. Weights, code, and the memory layer the model plugs into are released openly.

Touch supplies the physical grounding needed to perceive intrinsic material properties, such as friction and compliance, that vision alone often cannot resolve. Recent efforts for equipping multimodal LLMs with this tactile sense, however, expose a zero-sum trade-off: the limited parameter budget of compact models forces a choice between acquiring the new sensory modality and preserving the established vision-language reasoning. We present Splash, a mask-isolated tactile alignment learning framework for MLLMs. Splash quantifies the significance of each pretrained parameter, and partitions the parameter space into a dormant and critical subspace. While the frozen critical subspace acts as a stable anchor to safeguard general visual knowledge, Splash updates the isolated dormant subspace to internalize tactile alignment towards LLMs. This selective, non-destructive expansion effectively prevents catastrophic forgetting and ensures non-destructive modality expansion. Extensive experiments show that Splash effectively achieves tactile reasoning without additional inference overhead in the LLM part, demonstrating state-of-the-art performance on visuo-tactile benchmarks, including SSVTP, TVL, and TacQuad, while preserving its original general-purpose capabilities.

Tactile sensing is a crucial capability for Vision-Language-Action (VLA) architectures, as it enables dexterous and safe manipulation in contact-rich tasks. However, reliance on dedicated tactile hardware increases cost and reduces reproducibility across robotic platforms. We argue that tactile-aware manipulation can be learned offline and deployed without direct haptic feedback at inference. To this end, we present HapticVLA, which proceeds in two tightly coupled stages: Safety-Aware Reward-Weighted Flow Matching (SA-RWFM) and Tactile Distillation (TD). SA-RWFM trains a flow-matching action expert that incorporates precomputed, safety-aware tactile rewards penalizing excessive grasping force and suboptimal grasping trajectories. TD further transfers this tactile-aware capability into a conventional VLA: we distill a compact tactile token from the SA-RWFM teacher and train a student VLA to predict that token from vision and state modalities, enabling tactile-aware action generation at inference without requiring on-board tactile sensors. This design preserves contact-rich tactile-aware reasoning within VLA while removing the need for on-board tactile sensors during deployment. On real-world experiments, HapticVLA achieves a mean success rate of 86.7%, consistently outperforming baseline VLAs - including versions provided with direct tactile feedback during inference.

World Action Models (WAMs) generate actions together with predicted futures, offering a powerful interface for robot decision making. In contact-rich manipulation, however, visually plausible futures can be physically incomplete: insertion, assembly, search, and reorientation often depend on slip, jamming, contact normals, or small alignment errors that are weakly visible or hidden in RGB. A natural solution is to predict future tactile states, however, we identify tactile pollution, a failure mode where unconstrained tactile-token injection degrades video and action prediction by forcing a visual dynamics model to absorb sparse, local, event-driven contact signals. To address this, we propose Tactile-WAM, a touch-aware WAM with a Tactile Asymmetric Attention Mechanism (TAAM). TAAM combines a VideoClean mask, which blocks video-query access to tactile key/value tokens while preserving action-query access, with a touch-aware bias for action attention. The VideoClean mask protects visual prediction while keeping contact information available for action generation; the touch-aware bias is derived from predicted touch changes and modulates action attention to tactile tokens during denoising. On ManiFeel, Tactile-WAM improves the mean success rate by 38.9% overall and by 86% on contact-rich tasks.

Real-world contact-rich manipulation demands robots to perceive temporal tactile feedback, capture subtle surface deformations, and reason about object properties as well as force dynamics. Although optical tactile sensors are uniquely capable of providing such rich information, existing tactile datasets and models remain limited. These resources primarily focus on object-level attributes (e.g., material) while largely overlooking fine-grained tactile temporal dynamics during physical interactions. We consider that advancing dynamic tactile perception requires a systematic hierarchy of dynamic perception capabilities to guide both data collection and model design. To address the lack of tactile data with rich dynamic information, we present ToucHD, a large-scale hierarchical tactile dataset spanning tactile atomic actions, real-world manipulations, and touch-force paired data. Beyond scale, ToucHD establishes a comprehensive tactile dynamic data ecosystem that explicitly supports hierarchical perception capabilities from the data perspective. Building on it, we propose AnyTouch 2, a general tactile representation learning framework for diverse optical tactile sensors that unifies object-level understanding with fine-grained, force-aware dynamic perception. The framework captures both pixel-level and action-specific deformations across frames, while explicitly modeling physical force dynamics, thereby learning multi-level dynamic perception capabilities from the model perspective. We evaluate our model on benchmarks that covers static object properties and dynamic physical attributes, as well as real-world manipulation tasks spanning multiple tiers of dynamic perception capabilities-from basic object-level understanding to force-aware dexterous manipulation. Experimental results demonstrate consistent and strong performance across sensors and tasks.

Memory-augmented robotic policies are essential in handling memory-dependent tasks. However, existing approaches typically rely on simply extending the observation window, struggling to simultaneously achieve precise task-state tracking and robust long-horizon retention. To overcome these challenges, inspired by the Atkinson--Shiffrin memory model, we propose MemoAct, a hierarchical memory-augmented policy that leverages distinct memory tiers to tackle specific bottlenecks. Specifically, sensory memory filters immediate perceptual inputs, lossless short-term memory supports precise task-state tracking, and compressed long-term memory facilitates robust long-horizon retention. To enrich the evaluation landscape, we construct MemoryRTBench based on RoboTwin 2.0, comprising 6 manipulation tasks that systematically evaluate policy memory capabilities across three dimensions: sequential, spatial, and episodic memory. Extensive experiments across simulated and real-world scenarios demonstrate that MemoAct achieves superior performance compared to both existing Markovian baselines and history-aware policies. The project page is available at https://tlf-tlf.github.io/MemoActPage/.

While tactile sensing is widely accepted as an important and useful sensing modality, its use pales in comparison to other sensory modalities like vision and proprioception. AnySkin addresses the critical challenges that impede the use of tactile sensing -- versatility, replaceability, and data reusability. Building on the simplistic design of ReSkin, and decoupling the sensing electronics from the sensing interface, AnySkin simplifies integration making it as straightforward as putting on a phone case and connecting a charger. Furthermore, AnySkin is the first uncalibrated tactile-sensor with cross-instance generalizability of learned manipulation policies. To summarize, this work makes three key contributions: first, we introduce a streamlined fabrication process and a design tool for creating an adhesive-free, durable and easily replaceable magnetic tactile sensor; second, we characterize slip detection and policy learning with the AnySkin sensor; and third, we demonstrate zero-shot generalization of models trained on one instance of AnySkin to new instances, and compare it with popular existing tactile solutions like DIGIT and ReSkin. Videos of experiments, fabrication details and design files can be found on https://any-skin.github.io/

Robots need touch to manipulate objects safely and reliably, as many properties, such as softness, texture, and contact stability, are hard to infer from vision alone. However, vision-based tactile sensors yield different observations of the same material due to variations in optics, elastomer properties, and illumination, leading to poor generalization when trained on a single or multiple sensors. We propose a language-guided distillation framework for learning sensor-robust tactile representations. Language encodes high-level semantic properties of touch (e.g., rough, soft, slippery) that remain invariant across sensing hardware, providing a natural sensor-agnostic supervisory signal. We construct a 39K-sample touch-language dataset with human-annotated material labels and train a tactile encoder to align sensor-specific tactile images with language embeddings in a shared semantic space. We evaluate our approach for few-shot learning and cross-sensor transfer and benchmark it on six existing tactile datasets. Our method achieves 95% accuracy in the 100-shot setting, improves cross-sensor transfer by an average of 13.3% accuracy, and yields up to 19% accuracy gains across six existing tactile datasets. These results demonstrate that language-guided distillation enables scalable and hardware-agnostic tactile representation learning. Code and dataset are available at https://mashood3624.github.io/Language_Tactile/

Visuo-tactile perception aims to understand an object's tactile properties, such as texture, softness, and rigidity. However, the field remains underexplored because collecting tactile data is costly and labor-intensive. We observe that visually distinct objects can exhibit similar surface textures or material properties. For example, a leather sofa and a leather jacket have different appearances but share similar tactile properties. This implies that tactile understanding can be guided by material cues in visual data, even without direct tactile supervision. In this paper, we introduce RA-Touch, a retrieval-augmented framework that improves visuo-tactile perception by leveraging visual data enriched with tactile semantics. We carefully recaption a large-scale visual dataset with tactile-focused descriptions, enabling the model to access tactile semantics typically absent from conventional visual datasets. A key challenge remains in effectively utilizing these tactile-aware external descriptions. RA-Touch addresses this by retrieving visual-textual representations aligned with tactile inputs and integrating them to focus on relevant textural and material properties. By outperforming prior methods on the TVL benchmark, our method demonstrates the potential of retrieval-based visual reuse for tactile understanding. Code is available at https://aim-skku.github.io/RA-Touch

Large-scale egocentric human interaction data is becoming an important source of physical supervision for embodied learning, yet video alone leaves the contact and pressure that characterize physical interaction unrecorded. Recent visual-tactile datasets provide this missing supervision, but their synchronized tactile data remain far smaller in volume than human video. Moreover, the largest resources often merge recordings from different sensors or annotation procedures, which makes the effect of data scale difficult to isolate. We therefore introduce TouchScale, a 500-hour dataset of contact-rich human interaction recorded with a single unified wearable setup. Its approximately 2K predefined task descriptions span everyday activities and structured manipulation, and each recording temporally aligns egocentric RGB-D video with wrist RGB video and dense full-hand bimanual tactile measurements. Compared with prior tactile data, training on the full TouchScale raises zero-shot contact IoU on data from an unseen tactile sensor from 0.134 to 0.383. Pretraining a visual encoder on TouchScale also yields the highest action recognition accuracy on three benchmarks among the compared visual-tactile datasets. Used for visual-tactile mid-training of a robot policy, TouchScale improves the average real-world success rate across four contact-rich manipulation tasks from 22.5% to 57.5%. With the sensor and collection protocol held fixed, both zero-shot tactile prediction and robot success show an overall upward trend as more TouchScale data is used. These results suggest that human visual-tactile data collected at scale with consistent sensing benefits both perception and robot manipulation. We will publicly release TouchScale, including all synchronized visual-tactile recordings and reconstructed object models, to support future research on scalable visual-tactile learning.

Tactile sensors provide critical information for contact-rich manipulation, yet tactile representations and policies remain tightly coupled to each specific sensor, limiting transferability across robots and hardware platforms. We propose TactX, a framework for learning a transferable tactile representation across sensors spanning three fundamentally different transduction modalities: resistive, magnetic, and vision-based. TactX maps heterogeneous tactile observations into a shared latent space through modality-specific encoders trained on paired contact data. Such paired interactions provide a natural alignment signal across modalities, and the encoders are jointly trained across all sensor pairs, inducing a consistent latent space for all sensor types. Our experiments show that TactX aligns tactile representations across sensors while preserving object-level contact information, as evidenced by sensor-identity prediction and object classification in the learned latent space. We evaluate TactX on four contact-rich manipulation tasks: pick-and-place, plug insertion, board wiping, and object reorientation, and show that policies trained with one sensor transfer zero-shot to physically distinct sensors through the shared latent. This improves the average success rate from 27.5% for vision-only policy to 45.9%, providing a step toward sensor-agnostic tactile manipulation.

For both humans and robots, the sense of touch, known as tactile sensing, is critical for performing contact-rich manipulation tasks. Three key challenges in robotic tactile sensing are 1) interpreting sensor signals, 2) generating sensor signals in novel scenarios, and 3) learning sensor-based policies. For visuotactile sensors, interpretation has been facilitated by their close relationship with vision sensors (e.g., RGB cameras). However, generation is still difficult, as visuotactile sensors typically involve contact, deformation, illumination, and imaging, all of which are expensive to simulate; in turn, policy learning has been challenging, as simulation cannot be leveraged for large-scale data collection. We present TacSL (taxel), a library for GPU-based visuotactile sensor simulation and learning. TacSL can be used to simulate visuotactile images and extract contact-force distributions over 200times faster than the prior state-of-the-art, all within the widely-used Isaac Gym simulator. Furthermore, TacSL provides a learning toolkit containing multiple sensor models, contact-intensive training environments, and online/offline algorithms that can facilitate policy learning for sim-to-real applications. On the algorithmic side, we introduce a novel online reinforcement-learning algorithm called asymmetric actor-critic distillation (\sysName), designed to effectively and efficiently learn tactile-based policies in simulation that can transfer to the real world. Finally, we demonstrate the utility of our library and algorithms by evaluating the benefits of distillation and multimodal sensing for contact-rich manip ulation tasks, and most critically, performing sim-to-real transfer. Supplementary videos and results are at https://iakinola23.github.io/tacsl/.

Tactile sensing remains far less understood in neuroscience and less effective in artificial systems compared to more mature modalities such as vision and language. We bridge these gaps by introducing a novel Encoder-Attender-Decoder (EAD) framework to systematically explore the space of task-optimized temporal neural networks trained on realistic tactile input sequences from a customized rodent whisker-array simulator. We identify convolutional recurrent neural networks (ConvRNNs) as superior encoders to purely feedforward and state-space architectures for tactile categorization. Crucially, these ConvRNN-encoder-based EAD models achieve neural representations closely matching rodent somatosensory cortex, saturating the explainable neural variability and revealing a clear linear relationship between supervised categorization performance and neural alignment. Furthermore, contrastive self-supervised ConvRNN-encoder-based EADs, trained with tactile-specific augmentations, match supervised neural fits, serving as an ethologically-relevant, label-free proxy. For neuroscience, our findings highlight nonlinear recurrent processing as important for general-purpose tactile representations in somatosensory cortex, providing the first quantitative characterization of the underlying inductive biases in this system. For embodied AI, our results emphasize the importance of recurrent EAD architectures to handle realistic tactile inputs, along with tailored self-supervised learning methods for achieving robust tactile perception with the same type of sensors animals use to sense in unstructured environments.

Establishing a universal benchmark for tactile representation learning in robotic manipulation remains challenging due to the diversity of tactile sensor designs, data formats, and robot embodiments. Rather than seeking to establish such, we explore a scalable and promising direction for future development: egocentric vision paired with full-hand tactile data. To this end, we introduce HT-Bench, a large-scale multi-task benchmark for dexterous full-hand tactile sensing, comprising 10M RGB frames and 7.8M tactile frames collected across 226 tasks. HT-Bench evaluates tactile representations from three key perspectives: whether they encode meaningful contact geometry, whether they can align tactile observations with visual information, and whether they generalize to unseen tasks. To assess these capabilities, HT-Bench includes four tasks: fine-grained tactile similarity retrieval, masked tactile inpainting, vision-to-tactile synthesis, and multimodal tactile frame prediction. We further propose HandTouch, a vector-quantized vision--tactile encoder that learns tactile representations through progressive spatial, cross-modal, and temporal training. Across HT-Bench, HandTouch consistently outperforms representative tactile encoder baselines, improving Recall@5 on fine-grained tactile similarity retrieval from 74.65\% to 85.23\%, reducing RMSE on masked tactile inpainting from 0.022 to 0.010, and increasing OOD cIoU on vision-to-tactile synthesis from 0.628 to 0.705. These results demonstrate the effectiveness of HandTouch and suggest that large-scale egocentric full-hand tactile data provides a scalable basis for evaluating and advancing tactile representation learning in dexterous manipulation.

Tactile perception has the potential to significantly enhance dexterous robotic manipulation by providing rich local information that can complement or substitute for other sensory modalities such as vision. However, because tactile sensing is inherently local, it is not well-suited for tasks that require broad spatial awareness or global scene understanding on its own. A human-inspired strategy to address this issue is to consider active perception techniques instead. That is, to actively guide sensors toward regions with more informative or significant features and integrate such information over time in order to understand a scene or complete a task. Both active perception and different methods for tactile sensing have received significant attention recently. Yet, despite advancements, both fields lack standardized benchmarks. To bridge this gap, we introduce the Tactile MNIST Benchmark Suite, an open-source, Gymnasium-compatible benchmark specifically designed for active tactile perception tasks, including localization, classification, and volume estimation. Our benchmark suite offers diverse simulation scenarios, from simple toy environments all the way to complex tactile perception tasks using vision-based tactile sensors. Furthermore, we also offer a comprehensive dataset comprising 13,500 synthetic 3D MNIST digit models and 153,600 real-world tactile samples collected from 600 3D printed digits. Using this dataset, we train a CycleGAN for realistic tactile simulation rendering. By providing standardized protocols and reproducible evaluation frameworks, our benchmark suite facilitates systematic progress in the fields of tactile sensing and active perception.

Robotic manipulation requires both rich multimodal perception and effective learning frameworks to handle complex real-world tasks. See-through-skin (STS) sensors, which combine tactile and visual perception, offer promising sensing capabilities, while modern imitation learning provides powerful tools for policy acquisition. However, existing STS designs lack simultaneous multimodal perception and suffer from unreliable tactile tracking. Furthermore, integrating these rich multimodal signals into learning-based manipulation pipelines remains an open challenge. We introduce TacThru, an STS sensor enabling simultaneous visual perception and robust tactile signal extraction, and TacThru-UMI, an imitation learning framework that leverages these multimodal signals for manipulation. Our sensor features a fully transparent elastomer, persistent illumination, novel keyline markers, and efficient tracking, while our learning system integrates these signals through a Transformer-based Diffusion Policy. Experiments on five challenging real-world tasks show that TacThru-UMI achieves an average success rate of 85.5%, significantly outperforming the baselines of alternating tactile-visual (66.3%) and vision-only (55.4%). The system excels in critical scenarios, including contact detection with thin and soft objects and precision manipulation requiring multimodal coordination. This work demonstrates that combining simultaneous multimodal perception with modern learning frameworks enables more precise, adaptable robotic manipulation.

Contact often occurs without macroscopic surface deformation, such as during interaction with liquids, semi-liquids, or ultra-soft materials. However, most existing tactile sensors rely on deformation to infer contact, making such light-contact interactions difficult to perceive robustly. To address this, we present LightTact, a visual-tactile fingertip sensor that makes contact directly visible via a deformation-independent principle. LightTact features an ambient-blocking optical configuration that suppresses both external light and internal illumination at non-contact regions, while transmitting only the scattered light generated at true contacts. As a result, LightTact produces high-contrast raw images in which non-contact pixels remain near-black (mean gray value < 3) and contact pixels preserve the natural appearance of the contacting surface. Built on this, LightTact achieves accurate pixel-level contact segmentation that is robust to material properties, contact force, surface appearance, and environmental lighting. We further demonstrate that LightTact unlocks new robotic manipulation behaviors that require detection of extremely light contact, including water spreading, facial-cream dipping, and soft thin-film interaction. In addition, we show that LightTact's spatially aligned visual-tactile images can be directly interpreted by vision-language models.

Tactile sensing is an essential modality for robots performing contact-rich, dexterous manipulation, particularly under visual occlusion. While pre-trained image encoders are standard in robot learning pipelines, tactile encoders are still commonly trained from scratch from raw, noisy signals, which might limit their expressivity. Existing self-supervised learning (SSL) approaches focus predominantly on vision-based tactile sensors, leaving distributed electronic skins largely unaddressed. These sensors, however, have a distinctive property: their sensing elements are sparse and irregularly arranged over the surface they cover, which makes direct reuse of visual SSL methods suboptimal. We present Tactile-JEPA, an efficient self-supervised pre-training method that uses the spatial arrangement of tactile sensors to learn topology-aware representations. Specifically, it is trained to predict the embeddings of masked sensing elements from the unmasked remainder, using the sensor connectivity graph to guide spatial masking. Our analysis shows that effective tactile representations require capturing both local contact details and the global state of the tactile surface, which we achieve through dual-scale masking. Across three diverse datasets spanning magnetic and piezoresistive sensors, different robot embodiments, and single- and paired-sensor configurations, Tactile-JEPA reduces force estimation error by 6.3% and in-hand orientation error by 20.8% over the prior state-of-the-art, with consistent gains in other downstream applications, including policy learning. Overall, our results demonstrate that the benefit of tactile sensing depends critically on the quality of encoder pre-training, a problem which Tactile-JEPA addresses directly. Code is available at https://github.com/E-Kovtun/tactile.

Touch is a crucial sensing modality that provides rich information about object properties and interactions with the physical environment. Humans and robots both benefit from using touch to perceive and interact with the surrounding environment (Johansson and Flanagan, 2009; Li et al., 2020; Calandra et al., 2017). However, no existing systems provide rich, multi-modal digital touch-sensing capabilities through a hemispherical compliant embodiment. Here, we describe several conceptual and technological innovations to improve the digitization of touch. These advances are embodied in an artificial finger-shaped sensor with advanced sensing capabilities. Significantly, this fingertip contains high-resolution sensors (~8.3 million taxels) that respond to omnidirectional touch, capture multi-modal signals, and use on-device artificial intelligence to process the data in real time. Evaluations show that the artificial fingertip can resolve spatial features as small as 7 um, sense normal and shear forces with a resolution of 1.01 mN and 1.27 mN, respectively, perceive vibrations up to 10 kHz, sense heat, and even sense odor. Furthermore, it embeds an on-device AI neural network accelerator that acts as a peripheral nervous system on a robot and mimics the reflex arc found in humans. These results demonstrate the possibility of digitizing touch with superhuman performance. The implications are profound, and we anticipate potential applications in robotics (industrial, medical, agricultural, and consumer-level), virtual reality and telepresence, prosthetics, and e-commerce. Toward digitizing touch at scale, we open-source a modular platform to facilitate future research on the nature of touch.

Handheld paradigms offer an efficient and intuitive way for collecting large-scale demonstration of robot manipulation. However, achieving contact-rich bimanual manipulation through these methods remains a pivotal challenge, which is substantially hindered by hardware adaptability and data efficacy. Prior hardware designs remain gripper-specific and often face a trade-off between tracking precision and portability. Furthermore, the lack of online feasibility checking during demonstration leads to poor replayability. More importantly, existing handheld setups struggle to collect interactive recovery data during robot execution, lacking the authentic tactile information necessary for robust policy refinement. To bridge these gaps, we present TAMEn, a tactile-aware manipulation engine for closed-loop data collection in contact-rich tasks. Our system features a cross-morphology wearable interface that enables rapid adaptation across heterogeneous grippers. To balance data quality and environmental diversity, we implement a dual-modal acquisition pipeline: a precision mode leveraging motion capture for high-fidelity demonstrations, and a portable mode utilizing VR-based tracking for in-the-wild acquisition and tactile-visualized recovery teleoperation. Building on this hardware, we unify large-scale tactile pretraining, task-specific bimanual demonstrations, and human-in-the-loop recovery data into a pyramid-structured data regime, enabling closed-loop policy refinement. Experiments show that our feasibility-aware pipeline significantly improves demonstration replayability, and that the proposed visuo-tactile learning framework increases task success rates from 34% to 75% across diverse bimanual manipulation tasks. We further open-source the hardware and dataset to facilitate reproducibility and support research in visuo-tactile manipulation.

While rule-based reinforcement learning has recently catalyzed explicit reasoning in multimodal models, tactile reasoning remains largely underexplored. Existing tactile-language models primarily rely on supervised or contrastive objectives, which limits their capacity to ground predictions in physical evidence or rectify misleading visual priors. Tactile reasoning introduces two modality-specific challenges: the ordinal nature of physical attributes (e.g., hardness, roughness) and the cross-sensor distribution shifts inherent in optical tactile hardware. In this work, we introduce TouchReason-1M, a large-scale multimodal dataset comprising over 1M synchronized tactile pairs across four distinct sensors, and TouchReason-Bench, a rigorous framework for evaluating tactile perception and visual-tactile conflict resolution. Building upon these, we propose Touch-R1, a tactile reasoning MLLM based on Qwen2.5-VL-7B. Touch-R1 is trained via a tactile-grounded GRPO objective that combines ordinal-aware accuracy, cross-sensor physical consistency, structured-format control, and an input-side tactile grounding objective. Specifically, the tactile-use reward assigns credit only when authentic tactile inputs yield superior correctness relative to counterfactual controls where the tactile stream is removed, shuffled, or noise-masked. On TouchReason-Bench, Touch-R1-7B outperforms Octopi-13B by 18.4\% and GPT-4o by 24.7\% on average. Its structured reasoning traces reveal emergent behaviors of probing, comparison, and revision, demonstrating that R1-style reasoning can be effectively grounded in physical contact.

Tactile imaging seeks to reconstruct the internal structure of soft objects through touch sensing, with applications in medical diagnosis and robotic manipulation. Recent self-supervised learning approaches have shown promising results, but rely on global, unstructured representations and robot-controlled sensing, limiting generalization and practical use. We propose Local Encoder for Spatial Sensing (LESS), an object-centric tactile representation that exploits the local nature of touch. The tactile scene is modeled as a grid of recurrent encoders with local receptive fields, whose states are fused to reconstruct 2D or 3D images of internal structure. This compositional design enables strong generalization: models trained on single-inclusion phantoms accurately image objects with multiple inclusions and varying sizes. The local structure further supports spatial uncertainty estimation. In addition, we enable hand-held tactile imaging via external pose tracking and human-like palpation data, and extend tactile imaging to full 3D reconstruction.

Contact-rich manipulation requires estimating forces, slip and contact geometry that can remain ambiguous in scene images. Optical tactile sensors provide both visual observations of the contact surface and mechanical measurements, yet learning from these signals raises two challenges: representing contact beyond appearance and transferring its benefits to a policy that does not require fingertip observations at deployment. We introduce HapticWAM, a world-action model that combines heterogeneous tactile encoding, structured contact prediction and teacher-student distillation. Its teacher encodes gel images together with deformation, shear, distributed forces, resultant wrench and derived contact state into a frozen video backbone. Rather than predicting tactile pixels alone, the model jointly generates actions and a contact package describing future events and mechanics. Anticipatory Contact Coupling uses the previously imagined package to condition attention, preserving a contact-related input when direct tactile observations are unavailable. Haptic-Imagination Distillation transfers both contact futures and action predictions to a student that retains the generative contact head but removes its fingertip input branches. On a real-world setup, across three contact-rich pick-and-place tasks, HapticWAM Student achieves a 77% per-task mean success rate (41 of 50 starts, 82% pooled), reaching 95% on one of the tasks, outperforming the evaluated teacher and baseline configurations.

Handheld grippers are increasingly used to collect human demonstrations due to their ease of deployment and versatility. However, most existing designs lack tactile sensing, despite the critical role of tactile feedback in precise manipulation. We present a portable, lightweight gripper with integrated tactile sensors that enables synchronized collection of visual and tactile data in diverse, real-world, and in-the-wild settings. Building on this hardware, we propose a cross-modal representation learning framework that integrates visual and tactile signals while preserving their distinct characteristics. The learning procedure allows the emergence of interpretable representations that consistently focus on contacting regions relevant for physical interactions. When used for downstream manipulation tasks, these representations enable more efficient and effective policy learning, supporting precise robotic manipulation based on multimodal feedback. We validate our approach on fine-grained tasks such as test tube insertion and pipette-based fluid transfer, demonstrating improved accuracy and robustness under external disturbances. Our project page is available at https://binghao-huang.github.io/touch_in_the_wild/ .

UMI-style interfaces enable scalable robot learning, but existing systems remain largely visuomotor, relying primarily on RGB observations and trajectory while providing only limited access to physical interaction signals. This becomes a fundamental limitation in contact-rich manipulation, where success depends on contact dynamics such as tactile interaction, internal grasping force, and external interaction wrench that are difficult to infer from vision alone. We present OmniUMI, a unified framework for physically grounded robot learning via human-aligned multimodal interaction. OmniUMI synchronously captures RGB, depth, trajectory, tactile sensing, internal grasping force, and external interaction wrench within a compact handheld system, while maintaining collection--deployment consistency through a shared embodiment design. To support human-aligned demonstration, OmniUMI enables natural perception and modulation of internal grasping force, external interaction wrench, and tactile interaction through bilateral gripper feedback and the handheld embodiment. Built on this interface, we extend diffusion policy with visual, tactile, and force-related observations, and deploy the learned policy through impedance-based execution for unified regulation of motion and contact behavior. Experiments demonstrate reliable sensing and strong downstream performance on force-sensitive pick-and-place, interactive surface erasing, and tactile-informed selective release. Overall, OmniUMI combines physically grounded multimodal data acquisition with human-aligned interaction, providing a scalable foundation for learning contact-rich manipulation.

Vision-Language-Action (VLA) models have shown remarkable generalization by mapping web-scale knowledge to robotic control, yet they remain blind to physical contact. Consequently, they struggle with contact-rich manipulation tasks that require reasoning about force, texture, and slip. While some approaches incorporate low-dimensional tactile signals, they fail to capture the high-resolution dynamics essential for such interactions. To address this limitation, we introduce DreamTacVLA, a framework that grounds VLA models in contact physics by learning to feel the future. Our model adopts a hierarchical perception scheme in which high-resolution tactile images serve as micro-vision inputs coupled with wrist-camera local vision and third-person macro vision. To reconcile these multi-scale sensory streams, we first train a unified policy with a Hierarchical Spatial Alignment (HSA) loss that aligns tactile tokens with their spatial counterparts in the wrist and third-person views. To further deepen the model's understanding of fine-grained contact dynamics, we finetune the system with a tactile world model that predicts future tactile signals. To mitigate tactile data scarcity and the wear-prone nature of tactile sensors, we construct a hybrid large-scale dataset sourced from both high-fidelity digital twin and real-world experiments. By anticipating upcoming tactile states, DreamTacVLA acquires a rich model of contact physics and conditions its actions on both real observations and imagined consequences. Across contact-rich manipulation tasks, it outperforms state-of-the-art VLA baselines, achieving up to 95% success, highlighting the importance of understanding physical contact for robust, touch-aware robotic agents.

Tactile graphics are essential for providing access to visual information for the 43 million people globally living with vision loss. Traditional methods for creating these graphics are labor-intensive and cannot meet growing demand. We introduce TactileNet, the first comprehensive dataset and AI-driven framework for generating embossing-ready 2D tactile templates using text-to-image Stable Diffusion (SD) models. By integrating Low-Rank Adaptation (LoRA) and DreamBooth, our method fine-tunes SD models to produce high-fidelity, guideline-compliant graphics while reducing computational costs. Quantitative evaluations with tactile experts show 92.86% adherence to accessibility standards. Structural fidelity analysis revealed near-human design similarity, with an SSIM of 0.538 between generated graphics and expert-designed tactile images. Notably, our method preserves object silhouettes better than human designs (SSIM = 0.259 vs. 0.215 for binary masks), addressing a key limitation of manual tactile abstraction. The framework scales to 32,000 images (7,050 high-quality) across 66 classes, with prompt editing enabling customizable outputs (e.g., adding or removing details). By automating the 2D template generation step-compatible with standard embossing workflows-TactileNet accelerates production while preserving design flexibility. This work demonstrates how AI can augment (not replace) human expertise to bridge the accessibility gap in education and beyond. Code, data, and models will be publicly released to foster further research.

Tactile sensing is one of the modalities humans rely on heavily to perceive the world. Working with vision, this modality refines local geometry structure, measures deformation at the contact area, and indicates the hand-object contact state. With the availability of open-source tactile sensors such as DIGIT, research on visual-tactile learning is becoming more accessible and reproducible. Leveraging this tactile sensor, we propose a novel visual-tactile in-hand object reconstruction framework VTacO, and extend it to VTacOH for hand-object reconstruction. Since our method can support both rigid and deformable object reconstruction, no existing benchmarks are proper for the goal. We propose a simulation environment, VT-Sim, which supports generating hand-object interaction for both rigid and deformable objects. With VT-Sim, we generate a large-scale training dataset and evaluate our method on it. Extensive experiments demonstrate that our proposed method can outperform the previous baseline methods qualitatively and quantitatively. Finally, we directly apply our model trained in simulation to various real-world test cases, which display qualitative results. Codes, models, simulation environment, and datasets are available at https://sites.google.com/view/vtaco/.

Touch is fundamental to dexterous manipulation, yet most egocentric human data increasingly used for robot learning lacks tactile information. Directly collecting large-scale tactile data is challenging due to sensor limitations, while human video data is abundant, contact-rich, and easily scalable. This motivates a natural question: can tactile signals be inferred purely from vision? To address this, we introduce EgoTac, a generalizable model that predicts rich tactile information directly from egocentric human videos. EgoTac is trained on a unified corpus of over 5.7M image-tactile pairs, covering both continuous force measurements and binary contacts. By learning from this diverse dataset, EgoTac captures nuanced touch dynamics across varied interactions. Experiments demonstrate strong performance: in-domain prediction achieves an average force error below 0.06N. On out-of-domain contact prediction benchmarks, EgoTac consistently outperforms the state-of-the-art contact estimator. It also captures the rise and fall patterns of real tactile data and enables zero-shot predictions on unconstrained real-world videos. Scaling analyses further reveal that both data diversity and volume improve performance steadily. Overall, EgoTac provides a scalable pathway to extract tactile priors from egocentric human videos, enabling broadly applicable tactile-aware robot learning.

Tactile-based reinforcement learning (RL) is currently hindered by fragmented research and a focus on over-saturated orientation tasks. We introduce v2 of the Robot Tactile Olympiad (roto 2.0), a GPU-parallelised benchmark designed to standardise tactile-based RL across four distinct robotic morphologies (16-DOF to 24-DOF). Unlike prior benchmarks, roto focuses on end-to-end "blind" manipulation, utilising only proprioception and tactile sensing without state information or distillation. We demonstrate a significant performance leap, with our blind agents achieving 13 Baoding ball rotations in 10 seconds, an order of magnitude faster than current state-of-the-art speeds. By open-sourcing our environments and robustly tuned baselines, we reduce the barrier to entry and enable researchers to prioritise fundamental algorithmic challenges over tedious RL tuning. Website: https://elle-miller.github.io/roto/

High-resolution tactile sensors have become critical for embodied perception and robotic manipulation. However, a key challenge in the field is the lack of transferability between sensors due to design and manufacturing variations, which result in significant differences in tactile signals. This limitation hinders the ability to transfer models or knowledge learned from one sensor to another. To address this, we introduce a novel method for extracting Sensor-Invariant Tactile Representations (SITR), enabling zero-shot transfer across optical tactile sensors. Our approach utilizes a transformer-based architecture trained on a diverse dataset of simulated sensor designs, allowing it to generalize to new sensors in the real world with minimal calibration. Experimental results demonstrate the method's effectiveness across various tactile sensing applications, facilitating data and model transferability for future advancements in the field.

Tactile sensing provides contact information that can be difficult to infer from vision alone, but tactile hardware for dexterous hands has not converged to a common design. Dexterous hands differ in finger structure, contact surfaces, and sensor layouts, while simulated tactile signals still differ from measurements produced by physical sensors. These factors make it difficult to study visuo-tactile manipulation across diverse dexterous hands within a consistent experimental setting. We present Bench2Dex, a simulation benchmark for visuo-tactile bimanual manipulation across 12 dexterous hands. We adapt existing robot models with a shared simulated tactile interface that converts local contact geometry into image-like tactile observations. The interface provides a consistent observation format across different hand morphologies without attempting to reproduce the output of a specific physical tactile sensor. Bench2Dex includes 26 bimanual manipulation tasks that involve tool use, articulated-object interaction, and multi-stage manipulation, together with about 1.3K human-teleoperated demonstrations. The benchmark provides synchronized visual, tactile, proprioceptive, action, and object-state observations, together with executable task metrics. For robustness, we group seven perturbation types into invariance axis, where the correct action does not change, and equivariance axis, where the correct action changes together with the perturbation. We evaluate ACT, Diffusion Policy, pi0.5, and GR00T N1.5 on Bench2Dex and report their performance and failure modes. Bench2Dex is meant as a platform for studying visuo-tactile learning across dexterous hands. It does not assume that simulated tactile observations can replace real tactile sensing; it offers a shared setting for algorithm development while tactile hardware and simulation models are still evolving.

We present N_0-Foundation, a paradigm for tactile-enabled embodied manipulation, which integrates tactile sensing hardware, large-scale multimodal data, tactile representation learning, and standardized evaluation. First, we engineer the infrastructure for scalable data collection, including a vision-based tactile sensor, a tactile Universal Manipulation Interface (UMI), and a synchronized visuo-tactile data collection system supporting both robot embodiments and UMI-based demonstrations. Leveraging this infrastructure, we construct NeoData, which contains more than 30000 hours of synchronized visual and tactile demonstrations, spanning six embodiments, 450 tasks, and billions of paired RGB and tactile frames collected through a mixture of real-robot teleoperation and UMI-based demonstrations. To facilitate open research, we further release OpenNeoData, a 5000-hour open-source subset of NeoData. The dataset addresses a central limitation of existing manipulation corpora, critical for deformable-object manipulation, precise assembly, delicate force control, and sustained surface interaction. Capitalizing on the large-scale, heterogeneous tactile measurements, we propose NeoForce, a visuo-tactile representation model that learn transferable tactile representations across different sensor designs. To enable systematic evaluation of tactile embodied models built upon our infrastructure, datasets and tactile representations, we further propose a comprehensive benchmark, which combines the real-world NeoReal suite and the simulated NeoSim suite for standardized evaluation. Experiments across both suites show that policies benefit from the physical contact state rather than from the device-specific appearance of the tactile signal. We release the dataset, the representation, and the benchmark, aiming at supporting future work on tactile-enabled embodied manipulation.

Vision-Language-Action (VLA) models have recently emerged as powerful generalists for robotic manipulation. However, due to their predominant reliance on visual modalities, they fundamentally lack the physical intuition required for contact-rich tasks that require precise force regulation and physical reasoning. Existing attempts to incorporate vision-based tactile sensing into VLA models typically treat tactile inputs as auxiliary visual textures, thereby overlooking the underlying correlation between surface deformation and interaction dynamics. To bridge this gap, we propose a paradigm shift from tactile-vision alignment to tactile-force alignment. Here, we introduce TaF-VLA, a framework that explicitly grounds high-dimensional tactile observations in physical interaction forces. To facilitate this, we develop an automated tactile-force data acquisition device and curate the TaF-Dataset, comprising over 10 million synchronized tactile observations, 6-axis force/torque, and matrix force map. To align sequential tactile observations with interaction forces, the central component of our approach is the Tactile-Force Adapter (TaF-Adapter), a tactile sensor encoder that extracts discretized latent information for encoding tactile observations. This mechanism ensures that the learned representations capture history-dependent, noise-insensitive physical dynamics rather than static visual textures. Finally, we integrate this force-aligned encoder into a VLA backbone. Extensive real-world experiments demonstrate that TaF-VLA policy significantly outperforms state-of-the-art tactile-vision-aligned and vision-only baselines on contact-rich tasks, verifying its ability to achieve robust, force-aware manipulation through cross-modal physical reasoning.

Contact-rich policies often fail because distinct physical states look alike yet require different actions. Cameras may not reveal whether a connector is aligned or fully seated, while many normal-only tactile sensors can miss the tangential interactions perpendicular to the grasping direction that distinguish these states. We ask whether a learning policy needs calibrated shear measurements, or only a repeatable observation that separates shear-dependent contact states. We introduce TacGooseBumps (TacGB), a passive domed film that mechanically encodes tangential loading as pattern changes in an existing sensor's pressure map. Tangential loading tilts each dome and redistributes pressure across its footprint; an end-to-end policy consumes the resulting maps without added electronics, force reconstruction, or taxel-level dome alignment. Across four imitation-learning tasks and two data-collection pipelines, TacGB improves goal attainment, efficiency, and contact quality: insertion success increases by up to 36 percentage points, and successful insertions are completed faster, while fragile-object placement becomes gentler and drawing becomes more continuous and straight. Signal, stage-wise, failure-mode, and trajectory analyses link these gains to contact regimes in which task-relevant tangential interactions are poorly resolved by vision and normal pressure alone. Together, these results show that shear need not be measured metrically to benefit robot learning; it can instead be mechanically encoded without changing the underlying tactile sensor or the policy's pressure-map input format.

Dexterous manipulation depends on contact dynamics that are often only partially observable from vision. Recent World-Action Models (WAMs) couple predictive video world modeling with action generation, but remain largely vision-centric and therefore cannot directly model these contact dynamics. We present DexTacWAM, a visuo-tactile WAM that encodes each fingertip independently, aggregates the resulting features through a finger- and pose-aware tactile compressor, and injects the tactile latent into a video diffusion world model for joint visuo-tactile world modeling. Across six contact-rich dexterous manipulation tasks on a 22-DoF bimanual platform, DexTacWAM achieves the highest score on every task, averaging 70.6 versus 38.0 for the strongest baseline. Ablations attribute the gain to modeling contact evolution as part of the predicted world state rather than tactile conditioning alone: removing tactile world modeling reduces the four-task mean from 74.7 to 26.6 while keeping the same tactile features and action expert. After four hours of tactile-encoder adaptation with a frozen pretrained vision VAE, our continual vision-to-touch learning extends the pretrained video model to touch using roughly 100 demonstrations per task without tactile midtraining, while retaining visual prediction quality within 0.5 dB of vision-only counterparts. The compressor retains 89.4% of pre-fusion contact recall while enabling 2.26x faster training and 1.29x faster inference. Together, these results show that pretrained video priors can be extended to distributed multi-finger contact dynamics in a data- and compute-efficient manner.

Robots in many real-world settings have access to force/torque sensors in their gripper and tactile sensing is often necessary in tasks that involve contact-rich motion. In this work, we leverage surprise from mismatches in touch feedback to guide exploration in hard sparse-reward reinforcement learning tasks. Our approach, Touch-based Curiosity (ToC), learns what visible objects interactions are supposed to "feel" like. We encourage exploration by rewarding interactions where the expectation and the experience don't match. In our proposed method, an initial task-independent exploration phase is followed by an on-task learning phase, in which the original interactions are relabeled with on-task rewards. We test our approach on a range of touch-intensive robot arm tasks (e.g. pushing objects, opening doors), which we also release as part of this work. Across multiple experiments in a simulated setting, we demonstrate that our method is able to learn these difficult tasks through sparse reward and curiosity alone. We compare our cross-modal approach to single-modality (touch- or vision-only) approaches as well as other curiosity-based methods and find that our method performs better and is more sample-efficient.

Tactile information plays a crucial role for humans and robots to interact effectively with their environment, particularly for tasks requiring the understanding of contact properties. Solving such dexterous manipulation tasks often relies on imitation learning from demonstration datasets, which are typically collected via teleoperation systems and often demand substantial time and effort. To address these challenges, we present ViTaMIn, an embodiment-free manipulation interface that seamlessly integrates visual and tactile sensing into a hand-held gripper, enabling data collection without the need for teleoperation. Our design employs a compliant Fin Ray gripper with tactile sensing, allowing operators to perceive force feedback during manipulation for more intuitive operation. Additionally, we propose a multimodal representation learning strategy to obtain pre-trained tactile representations, improving data efficiency and policy robustness. Experiments on seven contact-rich manipulation tasks demonstrate that ViTaMIn significantly outperforms baseline methods, demonstrating its effectiveness for complex manipulation tasks.

Touch sensing is beneficial for solving a wide variety of manipulation tasks. While there exists a wide range of tactile sensors with different properties, exploiting the fusion of multiple heterogeneous tactile sensors to improve manipulation learning remains underexplored. We present Multi-Resolution Tactile Sensing (MiTaS), a representation framework that leverages multiple tactile sensors operating at different temporal resolutions in order to solve complex contact-rich manipulation tasks. We propose a novel architecture using modality-specific convolutional stems and transformer-based fusion that effectively fuses information from an RGB camera stream, a vision-based GelSight Mini sensor and a high-frequency event-based Evetac sensor. This multi-sensor representation then conditions a flow-matching policy for solving downstream tasks. Experimental results across five contact-rich manipulation tasks demonstrate the effectiveness of multi-resolution tactile features in imitation learning. MiTaS achieves an average success rate of 80 %, while vision-only (31 %) and visual-tactile (54 %) baselines cannot solve the task reliably. Co-training a visuo-tactile model with multi-tactile data boosts performance by over 10 \% in certain tasks, without having access to the Evetac sensor during policy evaluation. A detailed sensor-reading and attention analysis reveals the importance of different sensors throughout task execution, validating our multi-resolution tactile sensing approach. Project Page: http://mitas-touch.github.io.

Unlike in language or vision, one of the fundamental challenges in robot learning is the lack of access to vast data resources. We can further break down the problem into (1) data sparsity from the angle of data representation and (2) data scarcity from the angle of data quantity. In this thesis, I will discuss selected works on two domains: (1) tactile sensing and (2) rehabilitation robots, which are exemplars of data sparsity and scarcity, respectively. Tactile sensing is an essential modality for robotics, but tactile data are often sparse, and for each interaction with the physical world, tactile sensors can only obtain information about the local area of contact. I will discuss my work on learning vision-free tactile-only exploration and manipulation policies through model-free reinforcement learning to make efficient use of sparse tactile information. On the other hand, rehabilitation robots are an example of data scarcity to the extreme due to the significant challenge of collecting biosignals from disabled-bodied subjects at scale for training. I will discuss my work in collaboration with the medical school and clinicians on intent inferral for stroke survivors, where a hand orthosis developed in our lab collects a set of biosignals from the patient and uses them to infer the activity that the patient intends to perform, so the orthosis can provide the right type of physical assistance at the right moment. My work develops machine learning algorithms that enable intent inferral with minimal data, including semi-supervised, meta-learning, and generative AI methods.

Enabling robots with contact-rich manipulation remains a pivotal challenge in robot learning, which is substantially hindered by the data collection gap, including its inefficiency and limited sensor setup. While prior work has explored handheld paradigms, their rod-based mechanical structures remain rigid and unintuitive, providing limited tactile feedback and posing challenges for human operators. Motivated by the dexterity and force feedback of human motion, we propose FreeTacMan, a human-centric and robot-free data collection system for accurate and efficient robot manipulation. Concretely, we design a wearable gripper with dual visuo-tactile sensors for data collection, which can be worn by human fingers for intuitive control. A high-precision optical tracking system is introduced to capture end-effector poses while synchronizing visual and tactile feedback simultaneously. We leverage FreeTacMan to collect a large-scale multimodal dataset, comprising over 3000k paired visual-tactile images with end-effector poses, 10k demonstration trajectories across 50 diverse contact-rich manipulation tasks. FreeTacMan achieves multiple improvements in data collection performance compared to prior works, and enables effective policy learning for contact-rich manipulation tasks with self-collected dataset. The full suite of hardware specifications and the dataset will be released to facilitate reproducibility and support research in visuo-tactile manipulation.

The ability to react dynamically to tactile signals has long been considered crucial to agile human-level dexterity. Yet contemporary learning-based Vision-Language-Action (VLA) models for robotic manipulation generally either overlook the tactile modality or are limited to encoders with static cues, due in part to the scarcity of diverse training data and standardized evaluation, architectural constraints in current VLA models, and limitations of static tactile encoders. In this paper, we push the frontier of tactile-reactive manipulation by addressing all of these limitations. We propose a large-scale, 100-hour tactile-rich dataset collected via a novel, data-efficient recipe that prioritizes elementary motor primitives. To effectively exploit naturally high-frequency touch signals without sacrificing the existing capabilities of existing VLAs, we introduce a variable-rate Mixture-of-Transformers (MoT) architecture equipped with a novel temporal tactile VQ-VAE encoder. We demonstrate the effectiveness of tactile-reactive policies on 12 manipulation tasks requiring delicate force control and deformable object manipulation, achieving over 30% higher average success rate than the strongest baseline.

Vision-based tactile sensing is widely used in perception, reconstruction, and robotic manipulation, yet collecting large-scale tactile data remains costly due to diverse sensor-object interactions and inconsistencies across sensor instances. Existing approaches to scaling tactile data---simulation and free-form tactile generation---often yield unrealistically rendered signals with poor transfer to highly dynamic real-world tasks. We propose \name, a two-stage controllable tactile image generation framework that generates realistic tactile images conditioned on a single reference tactile image, contact force, and contact pose. By grounding generation in these important physical priors, \name synthesizes realistic samples across different sensors while effectively capturing task-relevant variations. Across a series of downstream tasks and real-world experiments, such as object insertion, imitation learning, and object weighting, the augmented datasets using our approach consistently improve performance and demonstrate practical utility in dynamic real-world settings. Project page: https://dongyuluo.github.io/controltac.

World action models inherit the predictive capability of world models, enabling action generation to be guided by anticipated future observations. However, they rely primarily on vision and often fail in contact-rich manipulation, where critical cues arise from physical interaction. In this paper, we propose Dream-Tac, a unified Tactile-World Action Model that jointly models actions, future visual observations, and tactile dynamics. Specifically, Dream-Tac introduces (i) contact-gated visuotactile fusion to selectively integrate tactile signals and (ii) a contact-aware attention bias to better regulate cross-modal interactions during manipulation. To support real-time deployment, we further design a dual-level acceleration strategy, reformulating the contact-aware bias to preserve the fused attention path during training and introducing cache-based diffusion acceleration at inference, achieving up to 2.9times faster training and 1.8times faster inference. Across six contact-rich manipulation tasks, Dream-Tac improves action accuracy by 31.7\% on average, demonstrating the effectiveness of unified visuotactile world modeling.Code is available at https://github.com/LYFCLOUDFAN/Dream-Tac.

Video-Action Models (VAMs) have emerged as a promising framework for embodied intelligence, learning implicit world dynamics from raw video streams to produce temporally consistent action predictions. Although such models demonstrate strong performance on long-horizon tasks through visual reasoning, they remain limited in contact-rich scenarios where critical interaction states are only partially observable from vision alone. In particular, fine-grained force modulation and contact transitions are not reliably encoded in visual tokens, leading to unstable or imprecise behaviors. To bridge this gap, we introduce the Video-Tactile Action Model (VTAM), a multimodal world modeling framework that incorporates tactile perception as a complementary grounding signal. VTAM augments a pretrained video transformer with tactile streams via a lightweight modality transfer finetuning, enabling efficient cross-modal representation learning without tactile-language paired data or independent tactile pretraining. To stabilize multimodal fusion, we introduce a tactile regularization loss that enforces balanced cross-modal attention, preventing visual latent dominance in the action model. VTAM demonstrates superior performance in contact-rich manipulation, maintaining a robust success rate of 90 percent on average. In challenging scenarios such as potato chip pick-and-place requiring high-fidelity force awareness, VTAM outperforms the pi 0.5 baseline by 80 percent. Our findings demonstrate that integrating tactile feedback is essential for correcting visual estimation errors in world action models, providing a scalable approach to physically grounded embodied foundation models.

The ability to associate touch with other modalities has huge implications for humans and computational systems. However, multimodal learning with touch remains challenging due to the expensive data collection process and non-standardized sensor outputs. We introduce UniTouch, a unified tactile model for vision-based touch sensors connected to multiple modalities, including vision, language, and sound. We achieve this by aligning our UniTouch embeddings to pretrained image embeddings already associated with a variety of other modalities. We further propose learnable sensor-specific tokens, allowing the model to learn from a set of heterogeneous tactile sensors, all at the same time. UniTouch is capable of conducting various touch sensing tasks in the zero-shot setting, from robot grasping prediction to touch image question answering. To the best of our knowledge, UniTouch is the first to demonstrate such capabilities. Project page: https://cfeng16.github.io/UniTouch/

Egocentric human video data, which captures rich human-environment interactions and can be collected at scale, has become a key driver of embodied intelligence research. However, existing egocentric datasets typically lack tactile sensing, a critical modality that provides direct cues about contact, force, and pressure in human-object interaction. Without such signals, models struggle to learn physically grounded representations of real-world interaction dynamics. While tactile sensors provide these cues, deploying high-quality tactile hardware at scale remains expensive and cumbersome. This raises a central question: can tactile feedback be inferred directly from visual observations, enabling scalable tactile supervision for egocentric video data and supporting physically grounded embodied learning? To enable research in this direction, we introduce EgoTouch, a large-scale multi-view egocentric dataset with dense tactile supervision for bimanual hand-object interaction. EgoTouch comprises 208 manipulation tasks spanning 1,891 episodes in diverse indoor and outdoor environments, with synchronized multi-view RGB (head-mounted egocentric and dual wrist-mounted cameras), bimanual 3D hand pose, and continuous pressure maps from wearable tactile sensors. Building on EgoTouch, we introduce TouchAnything, a baseline multi-view vision-to-touch prediction framework that uses the egocentric view as the primary input and flexibly leverages available wrist-mounted views at inference time. Experiments show that incorporating wrist-mounted views generally improves tactile prediction over egocentric-only input, achieving up to 5.0% relative improvement in Contact IoU and 6.1% relative improvement in Volumetric IoU. We will publicly release the dataset, code, and benchmark.

Tactile graphics require careful expert validation before reaching blind and visually impaired (BVI) learners, yet existing datasets provide only coarse holistic quality ratings that offer no actionable repair signal. We present TactileEval, a three-stage pipeline that takes a first step toward automating this process. Drawing on expert free-text comments from the TactileNet dataset, we establish a five-category quality taxonomy; encompassing view angle, part completeness, background clutter, texture separation, and line quality aligned with BANA standards. We subsequently gathered 14,095 structured annotations via Amazon Mechanical Turk, spanning 66 object classes organized into six distinct families. A reproducible ViT-L/14 feature probe trained on this data achieves 85.70% overall test accuracy across 30 different tasks, with consistent difficulty ordering suggesting the taxonomy suggesting the taxonomy captures meaningful perceptual structure. Building on these evaluations, we present a ViT-guided automated editing pipeline that routes classifier scores through family-specific prompt templates to produce targeted corrections via gpt-image-1 image editing. Code, data, and models are available at https://TactileEval.github.io/

Despite the importance of tactile sensing for reliable manipulation, most existing Vision-Language-Action (VLA) datasets remain vision-only, and those that do incorporate tactile information typically lack the joint combination of task diversity, language conditioning, and action trajectories. Furthermore, existing teleoperation pipelines rarely provide haptic feedback to the operator, despite its established role in demonstration quality and manipulation stability. In this work, we present HapTile, a contact-grounded visuotactile manipulation dataset that advances beyond vision-only trajectory datasets by embedding physical interaction sensing at two levels: fingertip tactile feedback at the robot end-effector, and haptic-informed demonstrations at the teleoperator side. The data collection platform integrates haptic feedback directly into the teleoperation controller, enabling the operator to perceive contact interactions in real time. It is built around a standard and reproducible robotic system equipped with custom-designed fingertip tactile sensors. The dataset comprises everyday manipulation tasks spanning a broad range of contact-rich skills, including pick-and-place, folding, pressing, stacking, and other routine activities. Each task is paired with language instructions that condition the policy on the manipulation objective, together with synchronized visuotactile observations and action trajectories. In addition, we provide a benchmarking study on contact-rich policy learning using two baseline models to evaluate the effectiveness of the proposed contact-grounded dataset. The dataset and additional details are available on our website: haptile-dataset.github.io.

Humans rely on their visual and tactile senses to develop a comprehensive 3D understanding of their physical environment. Recently, there has been a growing interest in exploring and manipulating objects using data-driven approaches that utilise high-resolution vision-based tactile sensors. However, 3D shape reconstruction using tactile sensing has lagged behind visual shape reconstruction because of limitations in existing techniques, including the inability to generalise over unseen shapes, the absence of real-world testing, and limited expressive capacity imposed by discrete representations. To address these challenges, we propose TouchSDF, a Deep Learning approach for tactile 3D shape reconstruction that leverages the rich information provided by a vision-based tactile sensor and the expressivity of the implicit neural representation DeepSDF. Our technique consists of two components: (1) a Convolutional Neural Network that maps tactile images into local meshes representing the surface at the touch location, and (2) an implicit neural function that predicts a signed distance function to extract the desired 3D shape. This combination allows TouchSDF to reconstruct smooth and continuous 3D shapes from tactile inputs in simulation and real-world settings, opening up research avenues for robust 3D-aware representations and improved multimodal perception in robotics. Code and supplementary material are available at: https://touchsdf.github.io/

The ability to associate touch with sight is essential for tasks that require physically interacting with objects in the world. We propose a dataset with paired visual and tactile data called Touch and Go, in which human data collectors probe objects in natural environments using tactile sensors, while simultaneously recording egocentric video. In contrast to previous efforts, which have largely been confined to lab settings or simulated environments, our dataset spans a large number of "in the wild" objects and scenes. To demonstrate our dataset's effectiveness, we successfully apply it to a variety of tasks: 1) self-supervised visuo-tactile feature learning, 2) tactile-driven image stylization, i.e., making the visual appearance of an object more consistent with a given tactile signal, and 3) predicting future frames of a tactile signal from visuo-tactile inputs.

Robotic manipulation has seen rapid progress with vision-language-action (VLA) policies. However, visuo-tactile perception is critical for contact-rich manipulation, as tasks such as insertion are difficult to complete robustly using vision alone. At the same time, acquiring large-scale and reliable tactile data in the physical world remains costly and challenging, and the lack of a unified evaluation platform further limits policy learning and systematic analysis. To address these challenges, we propose UniVTAC, a simulation-based visuo-tactile data synthesis platform that supports three commonly used visuo-tactile sensors and enables scalable and controllable generation of informative contact interactions. Based on this platform, we introduce the UniVTAC Encoder, a visuo-tactile encoder trained on large-scale simulation-synthesized data with designed supervisory signals, providing tactile-centric visuo-tactile representations for downstream manipulation tasks. In addition, we present the UniVTAC Benchmark, which consists of eight representative visuo-tactile manipulation tasks for evaluating tactile-driven policies. Experimental results show that integrating the UniVTAC Encoder improves average success rates by 17.1% on the UniVTAC Benchmark, while real-world robotic experiments further demonstrate a 25% improvement in task success. Our webpage is available at https://univtac.github.io/.

Touch is an important sensing modality for humans, but it has not yet been incorporated into a multimodal generative language model. This is partially due to the difficulty of obtaining natural language labels for tactile data and the complexity of aligning tactile readings with both visual observations and language descriptions. As a step towards bridging that gap, this work introduces a new dataset of 44K in-the-wild vision-touch pairs, with English language labels annotated by humans (10%) and textual pseudo-labels from GPT-4V (90%). We use this dataset to train a vision-language-aligned tactile encoder for open-vocabulary classification and a touch-vision-language (TVL) model for text generation using the trained encoder. Results suggest that by incorporating touch, the TVL model improves (+29% classification accuracy) touch-vision-language alignment over existing models trained on any pair of those modalities. Although only a small fraction of the dataset is human-labeled, the TVL model demonstrates improved visual-tactile understanding over GPT-4V (+12%) and open-source vision-language models (+32%) on a new touch-vision understanding benchmark. Code and data: https://tactile-vlm.github.io.

Dexterous manipulation involves contact-rich and fine-grained interactions with the physical world, posing significant challenges for existing vision-language-action (VLA) models due to severe visual occlusions and complex contact dynamics. While recent works have incorporated tactile sensing into robotic manipulation, most approaches still rely on homogeneous multimodal fusion, lacking adaptive tactile integration and explicit modeling of physical dynamics. In this work, we present DeCAL, a physically-grounded dexterous vision-language-action model that unifies understanding, imagination and action generation for contact-rich dexterous manipulation. Built upon a Mixture-of-Transformers (MoT) architecture, DeCAL leverages specialized experts for each capability while enabling efficient information flow among them. To effectively leverage tactile information, we introduce Adaptive Visuo-Tactile Fusion that dynamically regulates tactile interactions via a contact-aware gating strategy. Furthermore, we propose Visuo-Tactile Latent Co-Imagination to jointly model visual and tactile dynamics, equipping the policy with implicit physical world knowledge. Experimental results show that DeCAL consistently achieves state-of-the-art performance across all tasks, attaining a 71% average success rate and an 83.4% progress success rate, while also demonstrating strong generalization to unseen scenarios. The website is available at https://aureleopku.github.io/DeCAL.

Memory-dependent robotic manipulation requires policies to use information that is no longer available in the current observation. Retaining history alone is insufficient: memory must preserve information that supports future actions. One challenge is whether a memory-free foundation model can learn to retain and use historical information from action demonstrations alone, without external memory support. We introduce T^2Mem, a framework that develops this capability within a pretrained vision-language-action policy, without external reasoning models or memory-specific annotations. T^2Mem uses test-time training to encode observation history into compact fast weights through online self-supervised updates, avoiding repeated processing of the full history. An observation-grounded interface extracts vision-language information for memory formation and supplies retrieved context to the action expert. Action supervision shapes what the memory learns to retain and use, while alternating memory-policy learning gives each component a fixed counterpart during optimization. Across 16 RoboMME tasks, T^2Mem improves average success from 17.93% to 56.83% over the memory-free base policy and outperforms the recurrent-memory methods reported in the benchmark, while controlled profiling indicates at least 3x inference speedup over explicit methods. Project website: https://yzliu84.github.io/T2MEM-project/

Palpation, the use of touch in medical examination, is almost exclusively performed by humans. We investigate a proof of concept for an artificial palpation method based on self-supervised learning. Our key idea is that an encoder-decoder framework can learn a representation from a sequence of tactile measurements that contains all the relevant information about the palpated object. We conjecture that such a representation can be used for downstream tasks such as tactile imaging and change detection. With enough training data, it should capture intricate patterns in the tactile measurements that go beyond a simple map of forces -- the current state of the art. To validate our approach, we both develop a simulation environment and collect a real-world dataset of soft objects and corresponding ground truth images obtained by magnetic resonance imaging (MRI). We collect palpation sequences using a robot equipped with a tactile sensor, and train a model that predicts sensory readings at different positions on the object. We investigate the representation learned in this process, and demonstrate its use in imaging and change detection.

Tactile perception is a critical component of solving real-world manipulation tasks, but tactile sensors for manipulation have barriers to use such as fragility and cost. In this work, we engage a robust, low-cost tactile sensor, BeadSight, as an alternative to precise pre-calibrated sensors for a pretraining approach to manipulation. We show that tactile pretraining, even with a low-fidelity sensor as BeadSight, can improve an imitation learning agent's performance on complex manipulation tasks. We demonstrate this method against a baseline USB cable plugging task, previously achieved with a much higher precision GelSight sensor as the tactile input to pretraining. Our best BeadSight pretrained visuo-tactile agent completed the task with 70\% accuracy compared to 85\% for the best GelSight pretrained visuo-tactile agent, with vision-only inference for both.

We present Sparsh-skin, a pre-trained encoder for magnetic skin sensors distributed across the fingertips, phalanges, and palm of a dexterous robot hand. Magnetic tactile skins offer a flexible form factor for hand-wide coverage with fast response times, in contrast to vision-based tactile sensors that are restricted to the fingertips and limited by bandwidth. Full hand tactile perception is crucial for robot dexterity. However, a lack of general-purpose models, challenges with interpreting magnetic flux and calibration have limited the adoption of these sensors. Sparsh-skin, given a history of kinematic and tactile sensing across a hand, outputs a latent tactile embedding that can be used in any downstream task. The encoder is self-supervised via self-distillation on a variety of unlabeled hand-object interactions using an Allegro hand sensorized with Xela uSkin. In experiments across several benchmark tasks, from state estimation to policy learning, we find that pretrained Sparsh-skin representations are both sample efficient in learning downstream tasks and improve task performance by over 41% compared to prior work and over 56% compared to end-to-end learning.

Deep generative models have various content creation applications such as graphic design, e-commerce, and virtual Try-on. However, current works mainly focus on synthesizing realistic visual outputs, often ignoring other sensory modalities, such as touch, which limits physical interaction with users. In this work, we leverage deep generative models to create a multi-sensory experience where users can touch and see the synthesized object when sliding their fingers on a haptic surface. The main challenges lie in the significant scale discrepancy between vision and touch sensing and the lack of explicit mapping from touch sensing data to a haptic rendering device. To bridge this gap, we collect high-resolution tactile data with a GelSight sensor and create a new visuotactile clothing dataset. We then develop a conditional generative model that synthesizes both visual and tactile outputs from a single sketch. We evaluate our method regarding image quality and tactile rendering accuracy. Finally, we introduce a pipeline to render high-quality visual and tactile outputs on an electroadhesion-based haptic device for an immersive experience, allowing for challenging materials and editable sketch inputs.

This paper presents T3: Transferable Tactile Transformers, a framework for tactile representation learning that scales across multi-sensors and multi-tasks. T3 is designed to overcome the contemporary issue that camera-based tactile sensing is extremely heterogeneous, i.e. sensors are built into different form factors, and existing datasets were collected for disparate tasks. T3 captures the shared latent information across different sensor-task pairings by constructing a shared trunk transformer with sensor-specific encoders and task-specific decoders. The pre-training of T3 utilizes a novel Foundation Tactile (FoTa) dataset, which is aggregated from several open-sourced datasets and it contains over 3 million data points gathered from 13 sensors and 11 tasks. FoTa is the largest and most diverse dataset in tactile sensing to date and it is made publicly available in a unified format. Across various sensors and tasks, experiments show that T3 pre-trained with FoTa achieved zero-shot transferability in certain sensor-task pairings, can be further fine-tuned with small amounts of domain-specific data, and its performance scales with bigger network sizes. T3 is also effective as a tactile encoder for long horizon contact-rich manipulation. Results from sub-millimeter multi-pin electronics insertion tasks show that T3 achieved a task success rate 25% higher than that of policies trained with tactile encoders trained from scratch, or 53% higher than without tactile sensing. Data, code, and model checkpoints are open-sourced at https://t3.alanz.info.

Can embodied task agents use tactile experience to perform fine manipulation without task-specific model training? We investigate this capability through Tactile-ETA, a system that incorporates tactile experience into an embodied task agent through in-context learning. Successful expert demonstrations show how contact changes during manipulation. We pair each recorded robot movement with its camera views and bilateral tactile observations. We keep tactile observations at the start and end of each movement and add two neighboring time points when the tactile images change markedly in between. The agent combines these demonstrations with current vision, tactile observations, and proprioception to select actions through general-purpose robot tools, without updating model parameters. Across four simulated manipulation tasks, adding tactile observations to the same two expert demonstrations increases average success from 15.75% to 24.00%, with current sensing and execution interfaces held fixed. Further experiments show that performance depends on the sensory content and representation of demonstrations, while comparing agent models on Lift Bottle reveals substantial differences under the same system configuration. On the real-robot tasks, demonstrations with aligned visual and tactile observations increase the task success rate from 0% to 60%. These findings demonstrate the feasibility of using tactile experience in context for fine manipulation and suggest a path toward extending embodied task agents to additional sensory inputs.

The human hand is our primary interface to the physical world, yet egocentric perception rarely knows when, where, or how forcefully it makes contact. Robust wearable tactile sensors are scarce, and no existing in-the-wild datasets align first-person video with full-hand touch. To bridge the gap between visual perception and physical interaction, we present OpenTouch, the first in-the-wild egocentric full-hand tactile dataset, containing 5.1 hours of synchronized video-touch-pose data and 2,900 curated clips with detailed text annotations. Using OpenTouch, we introduce retrieval and classification benchmarks that probe how touch grounds perception and action. We show that tactile signals provide a compact yet powerful cue for grasp understanding, strengthen cross-modal alignment, and can be reliably retrieved from in-the-wild video queries. By releasing this annotated vision-touch-pose dataset and benchmark, we aim to advance multimodal egocentric perception, embodied learning, and contact-rich robotic manipulation.

Tactile feedback is generally recognized to be crucial for effective interaction with the physical world. However, state-of-the-art Vision-Language-Action (VLA) models lack the ability to interpret and use tactile signals, limiting their effectiveness in contact-rich tasks. Incorporating tactile feedback into these systems is challenging due to the absence of large multi-modal datasets. We present VLA-Touch, an approach that enhances generalist robot policies with tactile sensing without fine-tuning the base VLA. Our method introduces two key innovations: (1) a pipeline that leverages a pretrained tactile-language model that provides semantic tactile feedback for high-level task planning, and (2) a diffusion-based controller that refines VLA-generated actions with tactile signals for contact-rich manipulation. Through real-world experiments, we demonstrate that our dual-level integration of tactile feedback improves task planning efficiency while enhancing execution precision. Code is open-sourced at https://github.com/jxbi1010/VLA-Touch{this URL}.

While passive surfaces offer numerous benefits for interaction in mixed reality, reliably detecting touch input solely from head-mounted cameras has been a long-standing challenge. Camera specifics, hand self-occlusion, and rapid movements of both head and fingers introduce considerable uncertainty about the exact location of touch events. Existing methods have thus not been capable of achieving the performance needed for robust interaction. In this paper, we present a real-time pipeline that detects touch input from all ten fingers on any physical surface, purely based on egocentric hand tracking. Our method TouchInsight comprises a neural network to predict the moment of a touch event, the finger making contact, and the touch location. TouchInsight represents locations through a bivariate Gaussian distribution to account for uncertainties due to sensing inaccuracies, which we resolve through contextual priors to accurately infer intended user input. We first evaluated our method offline and found that it locates input events with a mean error of 6.3 mm, and accurately detects touch events (F1=0.99) and identifies the finger used (F1=0.96). In an online evaluation, we then demonstrate the effectiveness of our approach for a core application of dexterous touch input: two-handed text entry. In our study, participants typed 37.0 words per minute with an uncorrected error rate of 2.9% on average.

Embodied intelligence has advanced rapidly in recent years; however, bimanual manipulation-especially in contact-rich tasks remains challenging. This is largely due to the lack of datasets with rich physical interaction signals, systematic task organization, and sufficient scale. To address these limitations, we introduce the VTOUCH dataset. It leverages vision based tactile sensing to provide high-fidelity physical interaction signals, adopts a matrix-style task design to enable systematic learning, and employs automated data collection pipelines covering real-world, demand-driven scenarios to ensure scalability. To further validate the effectiveness of the dataset, we conduct extensive quantitative experiments on cross-modal retrieval as well as real-robot evaluation. Finally, we demonstrate real-world performance through generalizable inference across multiple robots, policies, and tasks.

Physical interaction quality is central to deformable-object manipulation, yet most benchmarks evaluate task success alone. A policy may complete the task while allowing slip or causing excessive compression. A primary bottleneck is the absence of visuo-tactile datasets that pair policy-visible contact observations with independent physical ground truth over complete tasks. We introduce SoftVTBench, a visuo-tactile dataset for physical-interaction-aware deformable-object manipulation. It contains 4,000 expert demonstrations and more than 50 assets, including volumetric deformable objects and visually matched rigid twins. At 20 Hz, each episode synchronizes multi-view RGB, dual-finger tactile RGB and marker motion, proprioception, language, and binary and continuous gripper actions, alongside evaluator-only finite-element (FEM) states. Building upon this dataset, we establish a closed-loop benchmark that uses fixed object-specific calibration to define the Deformation-aware Success Rate (DSR), which counts a rollout as successful only when it completes the task and keeps peak normalized deformation within tolerance. Across Diffusion Policy, π_{0.5}, and FastWAM, all 12 in-distribution configurations contain successful rollouts that violate the deformation tolerance, accounting for 0.7--24% of each configuration's successes. Under distribution shift, visuo-tactile variants achieve higher task success in all six policy--suite comparisons and higher DSR in five, whereas their in-distribution benefits are mixed. These results show that making touch available does not by itself ensure effective multimodal fusion. SoftVTBench therefore provides a common visuo-tactile resource for studying not only whether a policy succeeds, but how it physically interacts with deformable objects and when touch improves that interaction.

Contact-rich manipulation requires adapting to contact states that can evolve substantially within an action horizon. However, chunk-based vision-language-action models predict complete action chunks from observations collected before execution, leaving tactile conditioning stale during execution. Existing tactile-reactive approaches typically rely on separate high-frequency controllers, which increase both architectural and training complexity. In this paper, we introduce TacForcing, a streaming action-generation framework that effectively incorporates execution-time tactile feedback. Instead of employing a separate reactive controller, TacForcing replaces the standard action expert with a streaming action expert to generate actions conditioned on the evolving tactile observations acquired during execution. TacForcing also introduces Execution-Aware Tactile Attention (EATA), which restricts tactile conditioning to actions nearing execution, thereby reducing the temporal mismatch between tactile acquisition and action execution. Across six simulated UniVTAC tasks and three real-world contact-rich manipulation tasks, TacForcing achieves average success rates of 65% and 69%, respectively, outperforming strong baselines in both settings.

If human experience is any guide, operating effectively in unstructured environments -- like homes and offices -- requires robots to sense the forces during physical interaction. Yet, the lack of a versatile, accessible, and easily customizable tactile sensor has led to fragmented, sensor-specific solutions in robotic manipulation -- and in many cases, to force-unaware, sensorless approaches. With eFlesh, we bridge this gap by introducing a magnetic tactile sensor that is low-cost, easy to fabricate, and highly customizable. Building an eFlesh sensor requires only four components: a hobbyist 3D printer, off-the-shelf magnets (<$5), a CAD model of the desired shape, and a magnetometer circuit board. The sensor is constructed from tiled, parameterized microstructures, which allow for tuning the sensor's geometry and its mechanical response. We provide an open-source design tool that converts convex OBJ/STL files into 3D-printable STLs for fabrication. This modular design framework enables users to create application-specific sensors, and to adjust sensitivity depending on the task. Our sensor characterization experiments demonstrate the capabilities of eFlesh: contact localization RMSE of 0.5 mm, and force prediction RMSE of 0.27 N for normal force and 0.12 N for shear force. We also present a learned slip detection model that generalizes to unseen objects with 95% accuracy, and visuotactile control policies that improve manipulation performance by 40% over vision-only baselines -- achieving 91% average success rate for four precise tasks that require sub-mm accuracy for successful completion. All design files, code and the CAD-to-eFlesh STL conversion tool are open-sourced and available on https://e-flesh.com.

Tactile sensing is essential for robots to achieve human-like gentle manipulation. However, existing Vision-Language-Action (VLA) models struggle to exploit tactile feedback for gentle manipulation due to scarce aligned vision-tactile-language data and the lack of effective closed-loop force feedback mechanisms. To address these challenges, we introduce Tabero, a benchmark and model suite for gentle, language-conditioned robotic manipulation that demands fine-grained contact force perception. First, the Tabero benchmark addresses the scarcity of tactile data by presenting a data-efficient pipeline that repurposes open-source robot manipulation trajectories to generate diverse vision-tactile-language tasks, and establishes a multidimensional evaluation protocol that measures task success alongside physical interaction quality. Second, we propose Tabero-VTLA, an architecture with a decoupled force-position command interface; the resulting force-position commands are executed by a fixed hybrid controller to enable real-time, force-aware manipulation. Evaluated on Tabero, our model maintains high task success while reducing average grip force by over 70\% under gentle instructions, demonstrating its ability to modulate interaction forces based on multimodal experience. Our code is publicly available at https://github.com/NathanWu7/Tabero.

3D generation methods have shown visually compelling results powered by diffusion image priors. However, they often fail to produce realistic geometric details, resulting in overly smooth surfaces or geometric details inaccurately baked in albedo maps. To address this, we introduce a new method that incorporates touch as an additional modality to improve the geometric details of generated 3D assets. We design a lightweight 3D texture field to synthesize visual and tactile textures, guided by 2D diffusion model priors on both visual and tactile domains. We condition the visual texture generation on high-resolution tactile normals and guide the patch-based tactile texture refinement with a customized TextureDreambooth. We further present a multi-part generation pipeline that enables us to synthesize different textures across various regions. To our knowledge, we are the first to leverage high-resolution tactile sensing to enhance geometric details for 3D generation tasks. We evaluate our method in both text-to-3D and image-to-3D settings. Our experiments demonstrate that our method provides customized and realistic fine geometric textures while maintaining accurate alignment between two modalities of vision and touch.

Tactile sensing provides essential contact information for robotic manipulation, yet incorporating it into pretrained vision-language-action (VLA) models remains challenging. A common concern is that simply introducing touch during task-specific fine-tuning may fail to bridge the cross-modal gap, yielding limited gains or even reduced success. Consequently, existing methods often rely on large-scale tactile policy pretraining or separate visuotactile alignment, adding data requirements and training stages. We introduce SimpleTouch, a simple VLA extension that augments π_{0.5} with a tactile expert, to test whether these additional stages are necessary. Leveraging all tokens from a frozen pretrained tactile encoder, the expert learns from action supervision and multi-horizon prediction of future tactile latents. This single-stage training uses only task demonstrations, without additional tactile policy pretraining or separate alignment. With 50 demonstrations per task, SimpleTouch achieves the highest success rate among evaluated methods on all six UniVTAC tasks. Its average success rate reaches 77.5%, compared with 45.2% for FTP-π_{0.5} and 66.7% for FTP-1, corresponding to gains of 32.3 and 10.8 percentage points, respectively. Across four real-world tasks, it averages 71.3%, exceeding FTP-1 by 8.8 percentage points. These results demonstrate that, given pretrained VLA and tactile representations, additional tactile policy pretraining is not a prerequisite for strong performance on these tasks, offering a simpler route to contact-rich manipulation. Project page: https://simpletouch-robot.github.io/

High-fidelity visuo-tactile sensing is important for precise robotic manipulation, yet most vision-based tactile sensors rely on opaque coatings that enable tactile sensing but block direct visual observation. We propose MuxGel, a spatially multiplexed sensor that captures both external visual information and contact-induced tactile signals through a single camera. By using a checkerboard coating pattern, MuxGel interleaves tactile-sensitive regions with transparent windows for external vision. This design maintains standard form factors, allowing for plug-and-play integration into GelSight-style sensors by simply replacing the gel pad. To recover dense visual and tactile signals from the multiplexed inputs, we develop a U-Net-based reconstruction framework trained with a sim-to-real pipeline. Experiments on unseen objects demonstrate the framework's generalization and accuracy. We further demonstrate MuxGel in grasping tasks, where visual feedback supports alignment and tactile feedback supports contact interaction. Results show that MuxGel enables single-camera dual-modal sensing within a GelSight-style implementation, providing local visual feedback and reconstructed tactile feedback with potential extension to other optical tactile sensors. Project webpage: https://zhixianhu.github.io/muxgel/.

World-action models guide action generation with predicted future observations, but vision-centric predictions miss the local contact cues that decide contact-rich manipulation. However, naively predicting future tactile observations as additional views recovers only a third of the achievable gain in our experiments. This gap reflects a timing mismatch: predictions precede execution, while tactile feedback arrives during it. We introduce TacPAC, which turns tactile prediction into real-time action correction. Once the base model has planned an action chunk, TacPAC caches the predicted contact that plan was conditioned on together with the plan's own representation, and a tactile expert reads each newly observed tactile image against that cache to correct the actions not yet executed. Feedback is thus interpreted against what the plan anticipated rather than in isolation, and one correction is a single pass over that cache, 20.7times cheaper than regenerating the chunk. On five real-robot tasks spanning precision insertion, fragile-object handling, object reorientation, and long-horizon manipulation, TacPAC leads every task and raises the average from 22% for its vision-only base model to 64%. Code is available at https://github.com/LogosRoboticsGroup/TacPAC.

Handheld devices have opened up unprecedented opportunities to collect large-scale, high-quality demonstrations efficiently. However, existing systems often lack robust tactile sensing or reliable pose tracking to handle complex interaction scenarios, especially for bimanual and contact-rich tasks. In this work, we propose ViTaMIn-B, a more capable and efficient handheld data collection system for such tasks. We first design DuoTact, a novel compliant visuo-tactile sensor built with a flexible frame to withstand large contact forces during manipulation while capturing high-resolution contact geometry. To enhance the cross-sensor generalizability, we propose reconstructing the sensor's global deformation as a 3D point cloud and using it as the policy input. We further develop a robust, unified 6-DoF bimanual pose acquisition process using Meta Quest controllers, which eliminates the trajectory drift issue in common SLAM-based methods. Comprehensive user studies confirm the efficiency and high usability of ViTaMIn-B among novice and expert operators. Furthermore, experiments on four bimanual manipulation tasks demonstrate its superior task performance relative to existing systems. Project page: https://chuanyune.github.io/ViTaMIn-B_page/

Learning representations in the joint domain of vision and touch can improve manipulation dexterity, robustness, and sample-complexity by exploiting mutual information and complementary cues. Here, we present Visuo-Tactile Transformers (VTTs), a novel multimodal representation learning approach suited for model-based reinforcement learning and planning. Our approach extends the Visual Transformer dosovitskiy2021image to handle visuo-tactile feedback. Specifically, VTT uses tactile feedback together with self and cross-modal attention to build latent heatmap representations that focus attention on important task features in the visual domain. We demonstrate the efficacy of VTT for representation learning with a comparative evaluation against baselines on four simulated robot tasks and one real world block pushing task. We conduct an ablation study over the components of VTT to highlight the importance of cross-modality in representation learning.

We introduce multi-task Visuo-Tactile World Models (VT-WM), which capture the physics of contact through touch reasoning. By complementing vision with tactile sensing, VT-WM better understands robot-object interactions in contact-rich tasks, avoiding common failure modes of vision-only models under occlusion or ambiguous contact states, such as objects disappearing, teleporting, or moving in ways that violate basic physics. Trained across a set of contact-rich manipulation tasks, VT-WM improves physical fidelity in imagination, achieving 33% better performance at maintaining object permanence and 29% better compliance with the laws of motion in autoregressive rollouts. Moreover, experiments show that grounding in contact dynamics also translates to planning. In zero-shot real-robot experiments, VT-WM achieves up to 35% higher success rates, with the largest gains in multi-step, contact-rich tasks. Finally, VT-WM demonstrates significant downstream versatility, effectively adapting its learned contact dynamics to a novel task and achieving reliable planning success with only a limited set of demonstrations.

As an essential modality for dexterous and contact-rich tasks, tactile sensing provides precise force feedback that cannot be reliably inferred from vision. However, limited by hardware and data collection systems, existing datasets with tactility remain small in scale and narrow in contact coverage. Meanwhile, Vision-Language-Action (VLA) models with tactile modality are constrained on dynamics-agnostic post-training, which limits the performance ceiling on downstream tasks. In this paper, we present H-Tac, a large-scale tactile-action dataset with 160-hour egocentric human videos containing more than 300 tasks and 135k episodes. Building upon this, we propose Transferable Tactile Pre-Training (TTP), a system of tactile-based pre-training on human data for fine-grained robotic tasks. To bridge the gap between humans and robots, we use unified tactile and action spaces throughout the pre-training and post-training phases, preserving prior knowledge during human-to-robot transfer. By leveraging a tactile expert for future tactile prediction, our framework explicitly models the contact dynamics and precise physical interactions. Extensive experiments in simulation and on real robots demonstrate that our model achieves superior performance, exhibiting robust generalization and fine-grained manipulation capabilities. TTP paves the way for scalable tactile pre-training via human-to-robot transfer.

Generalist robot policies benefit from large-scale visual pretraining but often struggle with contact-rich dexterous manipulation, where force, compliance, and incipient slip are hard to observe from images. We present Spark-0, a spatially aligned vision-tactile-language-action (VTLA) model that uses touch in two complementary ways. During pretraining, image-space contact maps derived from tactile gloves, together with features from a frozen 3D geometry teacher, supervise the visual tokens; these objectives are removed at inference. In parallel, a tactile pathway encodes regional force histories and 3D taxel states to condition the action expert. A single checkpoint therefore supports both vision-only and tactile-conditioned deployment. To scale this supervision, we build HumanTouch, a 1,000-hour dataset of full-hand tactile human manipulation, and pretrain Spark-0 on it together with egocentric video, robot data, and simulation. We also release SparkArena, which pairs vision-only simulated tasks with tactile-conditioned real-robot tasks on one dexterous embodiment. Spark-0 achieves the highest mean success rate on both SparkArena tracks and ranks first on all eight aggregate metrics of the Ego Humanoid Manipulation Benchmark. Compared with vision-only pretraining on the same data and compute with touch discarded, retaining the touch of 1,000 hours of HumanTouch raises vision-only success on Ego Humanoid from 52.5% to 71.7%, and success on SparkArena-Real, where touch is also used at deployment, from 44.0% to 52.0%, indicating that touch serves not only as a policy input but also as scalable supervision for dexterous visuomotor pretraining. The Website is available at: https://xsparkai.com/Spark-0.

Human skin provides a rich tactile sensing stream, localizing intentional and unintentional contact events over a large and contoured region. Replicating these tactile sensing capabilities for dexterous robotic manipulation systems remains a longstanding challenge. In this work, we take a step towards this goal by introducing DexSkin. DexSkin is a soft, conformable capacitive electronic skin that enables sensitive, localized, and calibratable tactile sensing, and can be tailored to varying geometries. We demonstrate its efficacy for learning downstream robotic manipulation by sensorizing a pair of parallel jaw gripper fingers, providing tactile coverage across almost the entire finger surfaces. We empirically evaluate DexSkin's capabilities in learning challenging manipulation tasks that require sensing coverage across the entire surface of the fingers, such as reorienting objects in hand and wrapping elastic bands around boxes, in a learning-from-demonstration framework. We then show that, critically for data-driven approaches, DexSkin can be calibrated to enable model transfer across sensor instances, and demonstrate its applicability to online reinforcement learning on real robots. Our results highlight DexSkin's suitability and practicality for learning real-world, contact-rich manipulation. Please see our project webpage for videos and visualizations: https://dex-skin.github.io/.

Dexterous manipulation requires tactile feedback. However, robot tactile demonstrations are difficult to scale,because dexterous-hand teleoperation provides limited tactile feedback to the operator. In contrast, human demonstrations offer a substantially more scalable source of diverse tactile interactions. Motivated by a simple premise: hands can change, but the underlying physics of interaction does not. We leverage human tactile data to improve dexterous manipulation policies. Specifically, we first build a tactile motion-capture system that synchronously records images, tactile signals, and hand motions. Using this system, we construct the UVTA dataset spanning five contact-rich tasks, with 1,000 human demonstrations covering diverse interaction patterns and 150 robot demonstrations per task. To transfer the underlying physics of human interaction to robot control, we propose a Unified Visual-Tactile-Action Model that maps both embodiments into aligned tactile and action representations and jointly predicts future action and tactile trajectories. The joint objective enables human demonstrations to supervise contact-aware representation learning, while only robot actions are executed during deployment. In real-robot evaluations across five tasks, our method achieves an average success rate of 70%, outperforming the strongest visual-tactile baseline, which achieves 29%, and an architecture ablation, which achieves 42%. Performance improves consistently with additional human demonstrations and exhibits no saturation at 1,000 demonstrations per task, validating the effectiveness of scalable human tactile data for dexterous manipulation. Project page is available at https://uni-vta.github.io/.

Contact-rich dexterous manipulation with multi-finger hands remains an open challenge in robotics because task success depends on multi-point contacts that continuously evolve and are highly sensitive to object geometry, frictional transitions, and slip. Recently, tactile-informed manipulation policies have shown promise. However, most use tactile signals as additional observations rather than modeling contact state or how their action outputs interact with low-level controller dynamics. We present Contact-Grounded Policy (CGP), a visuotactile policy that grounds multi-point contacts by predicting coupled trajectories of actual robot state and tactile feedback, and using a learned contact-consistency mapping to convert these predictions into executable target robot states for a compliance controller. CGP consists of two components: (i) a conditional diffusion model that forecasts future robot state and tactile feedback in a compressed latent space, and (ii) a learned contact-consistency mapping that converts the predicted robot state-tactile pair into executable targets for a compliance controller, enabling it to realize the intended contacts. We evaluate CGP using a physical four-finger Allegro V5 hand with Digit360 fingertip tactile sensors, and a simulated five-finger Tesollo DG-5F hand with dense whole-hand tactile arrays. Across a range of dexterous tasks including in-hand manipulation, delicate grasping, and tool use, CGP outperforms visuomotor and visuotactile diffusion-policy baselines.

Current Large Language Models (LLMs) are not only limited to some maximum context length, but also are not able to robustly consume long inputs. To address these limitations, we propose ReadAgent, an LLM agent system that increases effective context length up to 20x in our experiments. Inspired by how humans interactively read long documents, we implement ReadAgent as a simple prompting system that uses the advanced language capabilities of LLMs to (1) decide what content to store together in a memory episode, (2) compress those memory episodes into short episodic memories called gist memories, and (3) take actions to look up passages in the original text if ReadAgent needs to remind itself of relevant details to complete a task. We evaluate ReadAgent against baselines using retrieval methods, using the original long contexts, and using the gist memories. These evaluations are performed on three long-document reading comprehension tasks: QuALITY, NarrativeQA, and QMSum. ReadAgent outperforms the baselines on all three tasks while extending the effective context window by 3-20x.

Large-scale, high-quality multimodal demonstrations are essential for robot learning of contact-rich dexterous manipulation. While human-centric data collection systems lower the barrier to scaling, they struggle to capture the tactile information during physical interactions. Motivated by this, we present DexViTac, a portable, human-centric data collection system tailored for contact-rich dexterous manipulation. The system enables the high-fidelity acquisition of first-person vision, high-density tactile sensing, end-effector poses, and hand kinematics within unstructured, in-the-wild environments. Building upon this hardware, we propose a kinematics-grounded tactile representation learning algorithm that effectively resolves semantic ambiguities within tactile signals. Leveraging the efficiency of DexViTac, we construct a multimodal dataset comprising over 2,400 visuo-tactile-kinematic demonstrations. Experiments demonstrate that DexViTac achieves a collection efficiency exceeding 248 demonstrations per hour and remains robust against complex visual occlusions. Real-world deployment confirms that policies trained with the proposed dataset and learning strategy achieve an average success rate exceeding 85% across four challenging tasks. This performance significantly outperforms baseline methods, thereby validating the substantial improvement the system provides for learning contact-rich dexterous manipulation. Project page: https://xitong-c.github.io/DexViTac/.

Tactile-enhanced vision-language-action (VLA) policies have been introduced for contact-rich manipulation, where critical interaction states are often hidden from vision. Future tactile prediction is a promising way to use touch because it turns tactile outcomes into supervision for action-induced contact dynamics. Yet VLA policies contain representations with different roles, from perceptual encoding to motor prediction, making it unclear where this supervision should be applied. We study this as a representation-alignment problem. Through a linear probe analysis, we find that future tactile states are most predictable from intermediate action-expert features, rather than from vision-language features or final action states. Motivated by this observation, we introduce a lightweight Latent Tactile Predictor (LTP), which predicts compact future tactile embeddings from the identified intermediate representation. By avoiding direct prediction of noisy raw tactile signals, LTP provides an action-outcome grounding signal that aligns intermediate action representations with future contact consequences. Experiments on real-world contact-rich manipulation tasks show that representation-aligned tactile grounding outperforms less aligned or multi-interface tactile prediction, highlighting the importance of where tactile supervision is applied.

This paper examines memory mechanisms in Large Language Models (LLMs), emphasizing their importance for context-rich responses, reduced hallucinations, and improved efficiency. It categorizes memory into sensory, short-term, and long-term, with sensory memory corresponding to input prompts, short-term memory processing immediate context, and long-term memory implemented via external databases or structures. The text-based memory section covers acquisition (selection and summarization), management (updating, accessing, storing, and resolving conflicts), and utilization (full-text search, SQL queries, semantic search). The KV cache-based memory section discusses selection methods (regularity-based summarization, score-based approaches, special token embeddings) and compression techniques (low-rank compression, KV merging, multimodal compression), along with management strategies like offloading and shared attention mechanisms. Parameter-based memory methods (LoRA, TTT, MoE) transform memories into model parameters to enhance efficiency, while hidden-state-based memory approaches (chunk mechanisms, recurrent transformers, Mamba model) improve long-text processing by combining RNN hidden states with current methods. Overall, the paper offers a comprehensive analysis of LLM memory mechanisms, highlighting their significance and future research directions.

To achieve dexterity comparable to that of humans, robots must intelligently process tactile sensor data. Taxel-based tactile signals often have low spatial-resolution, with non-standardized representations. In this paper, we propose a novel framework, HyperTaxel, for learning a geometrically-informed representation of taxel-based tactile signals to address challenges associated with their spatial resolution. We use this representation and a contrastive learning objective to encode and map sparse low-resolution taxel signals to high-resolution contact surfaces. To address the uncertainty inherent in these signals, we leverage joint probability distributions across multiple simultaneous contacts to improve taxel hyper-resolution. We evaluate our representation by comparing it with two baselines and present results that suggest our representation outperforms the baselines. Furthermore, we present qualitative results that demonstrate the learned representation captures the geometric features of the contact surface, such as flatness, curvature, and edges, and generalizes across different objects and sensor configurations. Moreover, we present results that suggest our representation improves the performance of various downstream tasks, such as surface classification, 6D in-hand pose estimation, and sim-to-real transfer.

Tactile feedback is critical for understanding the dynamics of both rigid and deformable objects in many manipulation tasks, such as non-prehensile manipulation and dense packing. We introduce an approach that combines visual and tactile sensing for robotic manipulation by learning a neural, tactile-informed dynamics model. Our proposed framework, RoboPack, employs a recurrent graph neural network to estimate object states, including particles and object-level latent physics information, from historical visuo-tactile observations and to perform future state predictions. Our tactile-informed dynamics model, learned from real-world data, can solve downstream robotics tasks with model-predictive control. We demonstrate our approach on a real robot equipped with a compliant Soft-Bubble tactile sensor on non-prehensile manipulation and dense packing tasks, where the robot must infer the physics properties of objects from direct and indirect interactions. Trained on only an average of 30 minutes of real-world interaction data per task, our model can perform online adaptation and make touch-informed predictions. Through extensive evaluations in both long-horizon dynamics prediction and real-world manipulation, our method demonstrates superior effectiveness compared to previous learning-based and physics-based simulation systems.

High-fidelity haptic feedback is essential for immersive virtual environments, yet authoring realistic tactile textures remains a significant bottleneck for designers. We introduce HapticMatch, a visual-to-tactile generation framework designed to democratize haptic content creation. We present a novel dataset containing precisely aligned pairs of micro-scale optical images, surface height maps, and friction-induced vibrations for 100 diverse materials. Leveraging this data, we explore and demonstrate that conditional generative models like diffusion and flow-matching can synthesize high-fidelity, renderable surface geometries directly from standard RGB photos. By enabling a "Scan-to-Touch" workflow, HapticMatch allows interaction designers to rapidly prototype multimodal surface sensations without specialized recording equipment, bridging the gap between visual and tactile immersion in VR/AR interfaces.

Supervised visuomotor policies have shown strong performance in robotic manipulation but often struggle in tasks with limited visual inputs, such as operations in confined spaces and dimly lit environments, or tasks requiring precise perception of object properties and environmental interactions. In such cases, tactile feedback becomes essential for manipulation. While the rapid progress of supervised visuomotor policies has benefited greatly from high-quality, reproducible simulation benchmarks in visual imitation, the visuotactile domain still lacks a similarly comprehensive and reliable benchmark for large-scale and rigorous evaluation. To address this, we introduce ManiFeel, a reproducible and scalable simulation benchmark designed to systematically study supervised visuotactile policy learning. ManiFeel offers a diverse suite of contact-rich and visually challenging manipulation tasks, a modular evaluation pipeline spanning sensing modalities, tactile representations, and policy architectures, as well as real-world validation. Through extensive experiments, ManiFeel demonstrates how tactile sensing enhances policy performance across diverse manipulation scenarios, ranging from precise contact-driven operations to visually constrained settings. In addition, the results reveal task-dependent strengths of different tactile modalities and identify key design principles and open challenges for robust visuotactile policy learning. Real-world evaluations further confirm that ManiFeel provides a reliable and meaningful foundation for benchmarking and future visuotactile policy development. To foster reproducibility and future research, we will release our codebase, datasets, training logs, and pretrained checkpoints, aiming to accelerate progress toward generalizable visuotactile policy learning and manipulation.

Despite decades of research, general purpose in-hand manipulation remains one of the unsolved challenges of robotics. One of the contributing factors that limit current robotic manipulation systems is the difficulty of precisely sensing contact forces -- sensing and reasoning about contact forces are crucial to accurately control interactions with the environment. As a step towards enabling better robotic manipulation, we introduce DIGIT, an inexpensive, compact, and high-resolution tactile sensor geared towards in-hand manipulation. DIGIT improves upon past vision-based tactile sensors by miniaturizing the form factor to be mountable on multi-fingered hands, and by providing several design improvements that result in an easier, more repeatable manufacturing process, and enhanced reliability. We demonstrate the capabilities of the DIGIT sensor by training deep neural network model-based controllers to manipulate glass marbles in-hand with a multi-finger robotic hand. To provide the robotic community access to reliable and low-cost tactile sensors, we open-source the DIGIT design at https://digit.ml/.

Contact-rich manipulation tasks, such as wiping and assembly, require accurate perception of contact forces, friction changes, and state transitions that cannot be reliably inferred from vision alone. Despite growing interest in visuo-tactile manipulation, progress is constrained by two persistent limitations: existing datasets are small in scale and narrow in task coverage, and current methods treat tactile signals as passive observations rather than using them to model contact dynamics or enable closed-loop control explicitly. In this paper, we present OmniViTac, a large-scale visuo-tactile-action dataset comprising 21{,}000+ trajectories across 86 tasks and 100+ objects, organized into six physics-grounded interaction patterns. Building on this dataset, we propose OmniVTA, a world-model-based visuo-tactile manipulation framework that integrates four tightly coupled modules: a self-supervised tactile encoder, a two-stream visuo-tactile world model for predicting short-horizon contact evolution, a contact-aware fusion policy for action generation, and a 60Hz reflexive controller that corrects deviations between predicted and observed tactile signals in a closed loop. Real-robot experiments across all six interaction categories show that OmniVTA outperforms existing methods and generalizes well to unseen objects and geometric configurations, confirming the value of combining predictive contact modeling with high-frequency tactile feedback for contact-rich manipulation. All data, models, and code will be made publicly available on the project website at https://mrsecant.github.io/OmniVTA.

In robotic manipulation, tactile sensors are indispensable, especially when dealing with soft objects, objects of varying dimensions, or those out of the robot's direct line of sight. Traditional tactile sensors often grapple with challenges related to cost and durability. To address these issues, our study introduces a novel approach to visuo-tactile sensing with an emphasis on economy and replacablity. Our proposed sensor, BeadSight, uses hydro-gel beads encased in a vinyl bag as an economical, easily replaceable sensing medium. When the sensor makes contact with a surface, the deformation of the hydrogel beads is observed using a rear camera. This observation is then passed through a U-net Neural Network to predict the forces acting on the surface of the bead bag, in the form of a pressure map. Our results show that the sensor can accurately predict these pressure maps, detecting the location and magnitude of forces applied to the surface. These abilities make BeadSight an effective, inexpensive, and easily replaceable tactile sensor, ideal for many robotics applications.

Despite their remarkable capabilities, Large Language Models (LLMs) struggle to effectively leverage historical interaction information in dynamic and complex environments. Memory systems enable LLMs to move beyond stateless interactions by introducing persistent information storage, retrieval, and utilization mechanisms. However, existing memory systems often introduce substantial time and computational overhead. To this end, we introduce a new memory system called LightMem, which strikes a balance between the performance and efficiency of memory systems. Inspired by the Atkinson-Shiffrin model of human memory, LightMem organizes memory into three complementary stages. First, cognition-inspired sensory memory rapidly filters irrelevant information through lightweight compression and groups information according to their topics. Next, topic-aware short-term memory consolidates these topic-based groups, organizing and summarizing content for more structured access. Finally, long-term memory with sleep-time update employs an offline procedure that decouples consolidation from online inference. Experiments on LongMemEval with GPT and Qwen backbones show that LightMem outperforms strong baselines in accuracy (up to 10.9% gains) while reducing token usage by up to 117x, API calls by up to 159x, and runtime by over 12x. The code is available at https://github.com/zjunlp/LightMem.

Memory allows large language model (LLM) agents to use past experience, often stored as textual records, when responding to requests. For embodied agents that control robots, visual and spatial observations introduce a broader choice of memory modalities, affecting both the information available for subsequent tasks and the model inference costs of constructing and using memory. We introduce MeMoREval, a benchmark for studying this problem through a controlled experience-request protocol. Agents first experience a sequence of events without knowing the subsequent tasks, and subsequently they use memory to respond to information and action requests without receiving new observations. The benchmark comprises 53 tasks across four simulated indoor environments and measures task success alongside the inference costs of memory construction and use. Our reference evaluations reveal that storing frames outperforms storing generated descriptions at lower write-time inference cost for the primary model, while storing frames with scene graphs achieves the highest aggregate task success for every tested model. Extensions to accumulated experience, selective frame retention, and visual input to memory writers demonstrate how the benchmark accommodates further memory-design investigations. Two physical-robot demonstrations establish the feasibility of applying its protocol beyond simulation.

GUI agents must remember both useful experience from earlier tasks and unfinished progress in the current interaction. Latent memory offers a compact solution by compressing multimodal trajectories into a few continuous tokens. Existing methods, however, usually map each trajectory to one fixed memory block and train it mainly through next-action supervision. This creates three practical problems: important details may be lost during compression, the same memory block must serve different decision stages, and irrelevant retrieved trajectories may still mislead the agent. We introduce FocusMem, which separates these responsibilities within a compact latent-memory interface. A role-aware content basis encourages episodic memory to retain reusable experience and working memory to retain task progress. A state-conditioned readout generates a decision-specific view of the same stored evidence, while a lightweight trust gate can suppress memory blocks that appear irrelevant to the current step. All components are trained while the GUI policy remains frozen. Across five GUI-agent benchmarks, FocusMem consistently outperforms a fully matched action-only fixed-memory baseline and prior latent memory adaptations. Further analysis shows that semantic and functional supervision preserve complementary information, state-conditioned readout is more robust as surrounding trajectory context grows, and the trust gate reduces the harm caused by injected irrelevant episodic evidence. These results show that effective latent memory depends not only on compressing past interaction, but also on what is retained, what is exposed, and what is allowed.

Touch and vision go hand in hand, mutually enhancing our ability to understand the world. From a research perspective, the problem of mixing touch and vision is underexplored and presents interesting challenges. To this end, we propose Tactile-Informed 3DGS, a novel approach that incorporates touch data (local depth maps) with multi-view vision data to achieve surface reconstruction and novel view synthesis. Our method optimises 3D Gaussian primitives to accurately model the object's geometry at points of contact. By creating a framework that decreases the transmittance at touch locations, we achieve a refined surface reconstruction, ensuring a uniformly smooth depth map. Touch is particularly useful when considering non-Lambertian objects (e.g. shiny or reflective surfaces) since contemporary methods tend to fail to reconstruct with fidelity specular highlights. By combining vision and tactile sensing, we achieve more accurate geometry reconstructions with fewer images than prior methods. We conduct evaluation on objects with glossy and reflective surfaces and demonstrate the effectiveness of our approach, offering significant improvements in reconstruction quality.

UniT is a novel approach to tactile representation learning, using VQVAE to learn a compact latent space and serve as the tactile representation. It uses tactile images obtained from a single simple object to train the representation with transferability and generalizability. This tactile representation can be zero-shot transferred to various downstream tasks, including perception tasks and manipulation policy learning. Our benchmarking on an in-hand 3D pose estimation task shows that UniT outperforms existing visual and tactile representation learning methods. Additionally, UniT's effectiveness in policy learning is demonstrated across three real-world tasks involving diverse manipulated objects and complex robot-object-environment interactions. Through extensive experimentation, UniT is shown to be a simple-to-train, plug-and-play, yet widely effective method for tactile representation learning. For more details, please refer to our open-source repository https://github.com/ZhengtongXu/UniT and the project website https://zhengtongxu.github.io/unifiedtactile.github.io/.

Significant progress has been made in vision-language models. However, language-conditioned robotic manipulation for contact-rich tasks remains underexplored, particularly in terms of tactile sensing. To address this gap, we introduce the Tactile-Language-Action (TLA) model, which effectively processes sequential tactile feedback via cross-modal language grounding to enable robust policy generation in contact-intensive scenarios. In addition, we construct a comprehensive dataset that contains 24k pairs of tactile action instruction data, customized for fingertip peg-in-hole assembly, providing essential resources for TLA training and evaluation. Our results show that TLA significantly outperforms traditional imitation learning methods (e.g., diffusion policy) in terms of effective action generation and action accuracy, while demonstrating strong generalization capabilities by achieving over 85\% success rate on previously unseen assembly clearances and peg shapes. We publicly release all data and code in the hope of advancing research in language-conditioned tactile manipulation skill learning. Project website: https://sites.google.com/view/tactile-language-action/

Edge-deployed personal memory assistants must handle private interpersonal conversations on-device with open-weight models. Yet, existing memory benchmarks often under-test the combination of activity-dense interaction, ego-centric perspective, and coherent multi-session worlds. MemArena fills these gaps with a single-world conversational benchmark built with its MASim agent simulator, for 50 agents over 15 days (10.3M dialog-text tokens, 24.1K text-only ego-observed tokens/agent/day). With the interaction history, it co-generates ground truth over six recall, reasoning, and trustworthiness evaluation dimensions. We evaluate five open-weight readers with Vanilla context, BM25-RAG, Oracle retrieval, Memobase, and MemSearch as memory backends. Three results stand out: (1) Memory-backend choice matters more for content accuracy: At Qwen3-0.6B, Memobase-to-MemSearch gains +32.5/+19.2 pp, exceeding MemSearch reader scaling (+10.6/+6.8 pp). (2) Permission-aware access fails universally, with Oracle leaking heavily and other backends too timid to disclose. (3) Search latency bites only at very small reader: on a Spark GB10 edge node, memory-search adds a moderate and fixed 87/7/48 ms (BM25-RAG/Memobase/MemSearch) that composes a small part of TTFT for most reader-backend combinations. Code, the MASim simulator, and the MemArena-L benchmark will be released upon acceptance.

We present N_0-TWAM, a tactile-native world-action model for contact-rich manipulation that predicts both future vision and future contact. To our knowledge, it is the first tactile world-action model trained at large scale, and it shows strong capability on contact-rich tasks. We pre-train N_0-TWAM at large scale with visuo-tactile joint training over tactile-rich demonstrations spanning six embodiments and 450 tasks. We use NeoForce, a unified force-based tactile representation, to form a physically grounded contact signal that conditions action generation. To improve long-horizon and multi-stage manipulation, we introduce tactile contact events for task staging and advance through them during execution. For real-time efficiency, we adopt an asymmetric Mixture-of-Transformers architecture that pairs a full-width expert for video prediction with slim experts for downstream action and tactile prediction. Evaluations on both real and simulated benchmarks justify the capabilities of N_0-TWAM across a range of contact-rich tasks, and demonstrate the benefit of data scaling for precise tactile and action prediction. In summary, N_0-TWAM endows a world-action model with predictive capabilities to foresee vision, touch and action, building a solid foundation for fine-grained manipulation on open contact-rich tasks. The codebase and model checkpoints will be made publicly available to foster further research and development in tactile-enabled robotic manipulation.

We present MidasTouch, a tactile perception system for online global localization of a vision-based touch sensor sliding on an object surface. This framework takes in posed tactile images over time, and outputs an evolving distribution of sensor pose on the object's surface, without the need for visual priors. Our key insight is to estimate local surface geometry with tactile sensing, learn a compact representation for it, and disambiguate these signals over a long time horizon. The backbone of MidasTouch is a Monte-Carlo particle filter, with a measurement model based on a tactile code network learned from tactile simulation. This network, inspired by LIDAR place recognition, compactly summarizes local surface geometries. These generated codes are efficiently compared against a precomputed tactile codebook per-object, to update the pose distribution. We further release the YCB-Slide dataset of real-world and simulated forceful sliding interactions between a vision-based tactile sensor and standard YCB objects. While single-touch localization can be inherently ambiguous, we can quickly localize our sensor by traversing salient surface geometries. Project page: https://suddhu.github.io/midastouch-tactile/

Generalizing tool manipulation requires both semantic planning and precise physical control. Modern generalist robot policies, such as Vision-Language-Action (VLA) models, often lack the physical grounding required for contact-rich tool manipulation. Conversely, existing contact-aware policies that leverage tactile or haptic sensing are typically instance-specific and fail to generalize across diverse tool geometries. Bridging this gap requires learning representations that are both semantically transferable and physically grounded, yet a fundamental barrier remains: diverse real-world tactile data are prohibitive to collect at scale, while direct zero-shot sim-to-real transfer is challenging due to the complex nonlinear deformation of soft tactile sensors. To address this, we propose Semantic-Contact Fields (SCFields), a unified 3D representation that fuses visual semantics with dense extrinsic contact estimates, including contact probability and force. SCFields is learned through a two-stage Sim-to-Real Contact Learning Pipeline: we first pre-train on large-scale simulation to learn geometry-aware contact priors, then fine-tune on a small set of real data pseudo-labeled via geometric heuristics and force optimization to align real tactile signals. The resulting force-aware representation serves as the dense observation input to a diffusion policy, enabling physical generalization to unseen tool instances. Experiments on scraping, crayon drawing, and peeling demonstrate robust category-level generalization, significantly outperforming vision-only and raw-tactile baselines. Project page: https://kevinskwk.github.io/SCFields/.

Simulating optical tactile sensors presents significant challenges due to their high deformability and intricate optical properties. To address these issues and enable a physically accurate simulation, we propose DOT-Sim: Differentiable Optical Tactile Simulation. Unlike prior simulators that rely on simplified models of deformable sensors, DOT-Sim accurately captures the physical behavior of soft sensors by modeling them as elastic materials using the Material Point Method (MPM). DOT-Sim enables rapid calibration of optical tactile sensor simulation using a small number of demonstrations within minutes, which is substantially faster than existing methods. Compared to current baselines, our approach supports much larger and non-linear deformations. To handle the optical aspect, we propose a novel approach to simulating optical responses by learning a residual image relative to the real-world idle state. We validate the physical and visual realism of our method through a series of zero-shot sim-to-real tasks. Our experiments show that DOT-Sim (1) accurately replicates the physical dynamics of a DenseTact optical tactile sensor in reality, (2) generates realistic optical outputs in contact-rich scenarios, (3) enables direct deployment of simulation-trained classifiers in the real world, achieving 85% classification accuracy on challenging objects and 90% accuracy in embedded tumor-type detection, and (4) allows precise trajectory following with a policy trained from demonstrations in simulation, with an average error of less than 0.9 mm.

Long-term emotional-support agents require memory mechanisms for personalized understanding across sessions. However, emotional-support dialogue is often low-density: turns are incomplete, evidence is scattered, and user states evolve over time. Existing memory methods usually rely on fixed units, such as turn-level notes or session summaries, which may lose details or introduce redundant noise. We propose FTA-Mem, a structured memory framework for low-density long-term dialogue. FTA-Mem uses Boundary-preserving Window Segmentation (BWS) to form coherent situation fragments, and constructs Fact-Time-Affect Memory Units (FTA Units) that jointly encode factual content, temporal grounding, and affective context. Retrieved units are then synthesized into structured context for answer generation. Experiments on ES-MemEval and LoCoMo show that FTA-Mem improves overall long-term memory question answering across benchmarks with different information-density characteristics. On ES-MemEval, FTA-Mem achieves 0.3871 F1 and 0.6668 BERTScore. Further analysis shows that situation-level FTA construction better balances evidence preservation and construction cost than coarse session-level or overly fine-grained turn-pair construction, providing an effective granularity trade-off for long-term dialogue memory.

Personal intelligence systems are taking on increasingly complex everyday tasks, yet repeated questions, unnecessary confirmations, and unwanted outreach can turn capable assistance into interaction burden. Reducing this burden requires agents to remember how users want to be assisted. However, existing memory benchmarks focus on factual recall and personalized answers and rarely test how agents learn and act on interaction preferences. We introduce MemPABench, an interactive environment for on-policy evaluation of memory in personal agents. MemPABench poses long-horizon tasks requiring agents to decide when to clarify, confirm, or act autonomously. Four grounded simulated users hold 14 preferences across work and personal contexts. Their feedback spans 99 sessions over four months, with five event-driven changes per user testing memory updates. We evaluate preference selection, delivered behavior, and sensitivity to context and preference change. Evaluating four memory systems across four LLM backbones, we find that current memory brings limited gains in preference selection. Retrieval-based systems (i.e. Mem0, MemOS, simple RAG) do not outperform No Memory, while File-based memory improves accuracy but applies preferences beyond relevant contexts. Our analysis shows that current memory struggles to retrieve interaction preferences and adapt to preference changes. Even with the correct preference available, overriding the agent's default interaction habits remains challenging. The environment and dataset are available at https://mempabench.com.

Quality inspection in smart manufacturing requires identifying intrinsic material and surface properties beyond visible geometry, yet vision-only methods remain vulnerable to occlusion and reflection. We propose VitaTouch, a property-aware vision-tactile-language model for material-property inference and natural-language attribute description. VitaTouch uses modality-specific encoders and a dual Q-Former to extract language-relevant visual and tactile features, which are compressed into prefix tokens for a large language model. We align each modality with text and explicitly couple vision and touch through contrastive learning. We also construct VitaSet, a multimodal dataset with 186 objects, 52k images, and 5.1k human-verified instruction-answer pairs. VitaTouch achieves the best performance on HCT and the overall TVL benchmark, while remaining competitive on SSVTP. On VitaSet, it reaches 88.89% hardness accuracy, 75.13% roughness accuracy, and 54.81% descriptor recall; the material-description task further achieves a peak semantic similarity of 0.9009. With LoRA-based fine-tuning, VitaTouch attains 100.0%, 96.0%, and 92.0% accuracy for 2-, 3-, and 5-category defect recognition, respectively, and delivers 94.0% closed-loop recognition accuracy and 94.0% end-to-end sorting success in 100 laboratory robotic trials. More details are available at the project page: https://vitatouch.github.io/

Contact-rich manipulation requires policies to react to local deformation, pressure, slip, and friction, yet these cues are temporally sparse and often invisible in visual observations. Existing visual-tactile policies usually feed tactile observations directly into action prediction, but rarely model tactile deformation dynamics during action generation. In this paper, we introduce VT-WAM, a Visual-Tactile World Action Model that jointly learns future visual prediction, tactile deformation prediction, and action prediction within a unified flow matching framework. In particular, VT-WAM introduces (1) Asymmetric Mixture-of-Transformers (MoT) attention to bridge a first-frame visual anchor with temporal tactile dynamics, and (2) contact-gated Action-Visual-Tactile Attention Guidance (AVTAG) to encourage action queries to rely on tactile evidence during contact phases. Across six real-world contact-rich manipulation tasks, VT-WAM achieves a 71.67% average success rate, outperforming Fast-WAM by 26.67% and OmniVTLA by 35.84%. Ablations demonstrate that modeling tactile deformation dynamics and guiding contact-phase tactile attention are both important for contact-rich tasks. Project website: https://vt-wam.github.io/.

Vision-Language-Action (VLA) models have shown remarkable achievements, driven by the rich implicit knowledge of their vision-language components. However, achieving generalist robotic agents demands precise grounding into physical interactions, especially in contact-rich scenarios where fine-grained force control is essential. We advance VLAs' implicit knowledge beyond identifying what to do, towards guiding how to physically interact with real world. This paper introduces Tactile-VLA, a novel framework that deeply fuses vision, language, action, and tactile sensing. This framework incorporates a hybrid position-force controller to translate the model's intentions into precise physical actions and a reasoning module that allows the robot to adapt its strategy based on tactile feedback. Experiments demonstrate Tactile-VLA's effectiveness and generalizability in three key aspects: (1) enabling tactile-aware instruction following, (2) utilizing tactile-relevant commonsense, and (3) facilitating adaptive tactile-involved reasoning. A key finding is that the VLM's prior knowledge already contains semantic understanding of physical interaction; by connecting it to the robot's tactile sensors with only a few demonstrations, we can activate this prior knowledge to achieve zero-shot generalization in contact-rich tasks.

Robotic manipulation tasks exhibit varying memory requirements, ranging from Markovian tasks that require no memory to non-Markovian tasks that depend on historical information spanning single or multiple interaction trials. Surprisingly, simply extending observation histories of a visuomotor policy often leads to a significant performance drop due to distribution shift and overfitting. To address these issues, we propose Gated Memory Policy (GMP), a visuomotor policy that learns both when to recall memory and what to recall. To learn when to recall memory, GMP employs a learned memory gate mechanism that selectively activates history context only when necessary, improving robustness and reactivity. To learn what to recall efficiently, GMP introduces a lightweight cross-attention module that constructs effective latent memory representations. To further enhance robustness, GMP injects diffusion noise into historical actions, mitigating sensitivity to noisy or inaccurate histories during both training and inference. On our proposed non-Markovian benchmark MemMimic, GMP achieves a 30.1% average success rate improvement over long-history baselines, while maintaining competitive performance on Markovian tasks in RoboMimic. All code, data and in-the-wild deployment instructions are available on our project website https://gated-memory-policy.github.io/.

We present blind, whole-body manipulation skills on a Unitree G1 humanoid using only onboard proprioception, without cameras, markers, force-torque, or tactile sensors. Despite this minimal sensing, the trained policies exhibit surprising capability across qualitatively different tasks: push-resilient bipedal walking without IMU feedback, active soccer ball trapping with a foot, seeking and lifting a suitcase by its handle, and mounting a randomly positioned skateboard. We argue that these capabilities arise from a key underappreciated signal: the way the joint encoder readouts evolve under purposeful compliant contact, effectively forming a whole-body tactile channel. By generating contact-rich motions, the trained policies actively probe the environment; as a result, task-relevant object state (e.g., pose) becomes increasingly decodable from short proprioceptive histories. We expose this information using compact task-specific state estimators trained alongside, but fully separately from, the policies; their prediction errors decrease rapidly after informative contact. Our results indicate that joint encoder-based proprioception, combined with compliant actuation (now widely available on commercial robots and low-cost motors) is already a strong, practical substrate for whole-body dexterous manipulation and interactive perception, and therefore a natural foundation on which richer sensing can be layered.

Recent advances in robot learning have enabled manipulation policies to perform increasingly diverse tasks and generalize across environments. However, reliable execution often depends on hidden task states that cannot be determined from current observations alone, making interaction history essential. We introduce HIDE, a benchmark for evaluating manipulation memory under partial observability. HIDE comprises 15 tasks covering repetition counting, historical-state recall, and execution-progress tracking, with randomized initial configurations and decision points where similar observations require different actions depending on prior events. We further propose SEEK, a framework combining three complementary memory mechanisms to retain historical evidence and track execution state. Evaluations reveal substantial limitations in existing policies on HIDE, while memory augmentation improves task success in both simulation and real-world experiments. Individual mechanisms benefit some tasks but can degrade others; their combination achieves the highest average success rate on HIDE among the evaluated configurations. These findings highlight the importance of maintaining internal representations of hidden task states and matching memory design to task-specific information requirements.

Retrieval-augmented generation stores all content indiscriminately, degrading accuracy as noise accumulates. Parametric approaches compress knowledge into weights, precluding selective updates. Neither mirrors biological memory, which gates encoding based on salience and archives rather than deletes superseded information. We introduce write-time gating that filters incoming knowledge objects using composite salience scores (source reputation, novelty, reliability) while maintaining version chains that preserve prior states. Using real LLM evaluation without oracle access to quality labels, write gating achieves 100 percent accuracy versus 13 percent for ungated stores. The critical finding emerges under distractor scaling: at 8:1 distractor ratios, read-time filtering (Self-RAG) collapses to 0 percent while write gating maintains 100 percent, revealing a structural advantage of write-time over read-time curation. Validation on Wikipedia (20 entities), procedurally generated pharmacology data, and 2026 arXiv papers confirms these findings. The gating advantage scales inversely with parametric memory support: +25pp for Wikipedia, +48pp for post-cutoff arXiv, +65pp for procedural data with zero training knowledge. Signal ablation confirms the method does not depend on oracle-correlated metadata. Write gating matches Self-RAG accuracy at one-ninth the query-time cost.

Large-scale robot learning increasingly relies on diverse human demonstrations, yet tactile manipulation data remain difficult to scale, and existing multimodal datasets often lack consistent quality control and structured supervision. We present TacClaw-Infinity, a large-scale structured Vision-Tactile-Language-Action (VTLA) dataset for contact-rich manipulation, collected with TacClaw, a tactile-enabled UMI-style handheld interface that records synchronized visual observations, fingertip tactile signals, and end-effector trajectories without requiring a target robot during data collection. TacClaw-Infinity is built through a distributed worldwide collection across homes, laboratories, industrial workplaces, retail stores, and outdoor environments including tasks contributed by academic and industrial collaborators. Together, these efforts yield over 10,000 hours, 1 million episodes, and 1 billion frames spanning more than 1,000 task types. We develop a scalable pipeline for trajectory reconstruction, multimodal quality control, embodiment-aware filtering, and structured annotation, covering contact-centric segmentation, subtask description, and spatial grounding. We validate TacClaw-Infinity at both the data and model levels: At the data level, we assess the collection interface, the action-space compatibility of the curated demonstrations, and the structured annotations, while for the model level, we demonstrate cross-embodiment transfer across three heterogeneous robots without robot-specific demonstrations.

Long-term memory is essential for multimodal agents that interact with users across sustained conversations. However, user memories are not always explicitly stated: they may also be implied by recurring background objects in images, ambient sounds in audio, or other peripheral multimodal cues. Existing benchmarks largely focus on text-only memory or explicit multimodal evidence, leaving implicit multimodal cues underexplored. We introduce CUE-Mem, a text-image-audio benchmark for evaluating long-term user memory from implicit cues. CUE-Mem contains 2,674 questions across explicit and implicit evidence settings and covers four tasks: Entity Recall, Long Pattern, Personalized Recommendation, and Answer Refusal. Across textualized memory systems, implicit performance remains far below oracle evidence, locating the main bottleneck in preserving and retrieving subtle cues rather than question answerability. Increasing caption detail recovers more of this evidence, but brings uneven gains and rapidly growing token costs, motivating native multimodal access. Yet native access does not uniformly resolve the bottleneck: evidence use depends strongly on the backbone, while multimodal indexing introduces substantial retrieval noise. CUE-Mem provides a testbed for memory systems that selectively retain, retrieve, and use subtle multimodal evidence.

We analyse perception and memory, using mathematical models for knowledge graphs and tensors, to gain insights into the corresponding functionalities of the human mind. Our discussion is based on the concept of propositional sentences consisting of subject-predicate-object (SPO) triples for expressing elementary facts. SPO sentences are the basis for most natural languages but might also be important for explicit perception and declarative memories, as well as intra-brain communication and the ability to argue and reason. A set of SPO sentences can be described as a knowledge graph, which can be transformed into an adjacency tensor. We introduce tensor models, where concepts have dual representations as indices and associated embeddings, two constructs we believe are essential for the understanding of implicit and explicit perception and memory in the brain. We argue that a biological realization of perception and memory imposes constraints on information processing. In particular, we propose that explicit perception and declarative memories require a semantic decoder, which, in a simple realization, is based on four layers: First, a sensory memory layer, as a buffer for sensory input, second, an index layer representing concepts, third, a memoryless representation layer for the broadcasting of information ---the "blackboard", or the "canvas" of the brain--- and fourth, a working memory layer as a processing center and data buffer. We discuss the operations of the four layers and relate them to the global workspace theory. In a Bayesian brain interpretation, semantic memory defines the prior for observable triple statements. We propose that ---in evolution and during development--- semantic memory, episodic memory, and natural language evolved as emergent properties in agents' process to gain a deeper understanding of sensory information.

Contact-rich manipulation requires world models to reason over complex contact dynamics from multimodal sensory observations. However, it remains unclear which representation properties fundamentally support stable long-horizon planning in contact-rich settings. In this paper, we present ContactWorld, a benchmark and systematic empirical study of vision-tactile world models spanning 12 contact-rich manipulation tasks, including insertion, disassembly, screwing, and exploratory interaction. Across extensive experiments, we find that representations that are both spatially structured and temporally continuous consistently achieve the strongest planning performance. In particular, point-cloud observations improve average planning success rates from 20.7% with wrist-view observations and 22.0% with front-view observations to 32.1%. We further find that the effectiveness of tactile sensing depends critically on cross-modal representation compatibility rather than modality scaling alone. Combining point-cloud observations with tactile force-field representations, which preserve richer spatial structure and interaction dynamics, further improves performance to 36.1%, yielding the strongest overall planning performance across all evaluated tasks. Moreover, tactile sensing becomes increasingly important under long-horizon planning objectives, where compounding prediction errors and contact uncertainty accumulate over time. Together, these findings highlight the importance of representation structure, multimodal compatibility, and long-horizon robustness in vision-tactile world models for contact-rich robotic manipulation.

Dexterous manipulation in everyday environments requires both anticipation and reaction: a robot must predict how contact should evolve while rapidly correcting local errors caused by slip, misalignment, unstable grasping, or force mismatch. Vision and language provide semantic and geometric guidance, but they cannot reliably reveal hidden contact states such as force, slip, and contact stability. Although tactile sensing exposes these physical cues, most existing policies treat touch as a low-frequency observation stream within a monolithic action model, coupling slow task reasoning, action generation, and fast contact feedback in a single loop. We introduce TouchWorld, a predictive-and-reactive tactile foundation model for dexterous manipulation. TouchWorld uses a hierarchical policy that separates vision-language subtask planning, tactile world-model prediction, visuo-tactile goal-conditioned action generation, and high-frequency tactile residual refinement. A High-Level Planning Layer produces executable subtasks and predicts tactile subgoals; a Visuo-Tactile Goal-Conditioned Policy generates nominal action chunks; and a Tactile-Conditioned Refinement Policy performs online residual correction using recent tactile and proprioceptive feedback. By using touch as both a predictive contact reference and a fast feedback signal, TouchWorld preserves the semantic generalization of vision-language-action policies while improving local contact adaptation. Across six long-horizon and contact-rich dexterous manipulation tasks, TouchWorld achieves 65.0% success in the clean setting and 53.7% success under human perturbations, outperforming the strongest baseline by 15.7 and 18.5 percentage points, respectively.

Dexterous manipulation is a cornerstone capability for robotic systems aiming to interact with the physical world in a human-like manner. Although vision-based methods have advanced rapidly, tactile sensing remains crucial for fine-grained control, particularly in unstructured or visually occluded settings. We present ViTacFormer, a representation-learning approach that couples a cross-attention encoder to fuse high-resolution vision and touch with an autoregressive tactile prediction head that anticipates future contact signals. Building on this architecture, we devise an easy-to-challenging curriculum that steadily refines the visual-tactile latent space, boosting both accuracy and robustness. The learned cross-modal representation drives imitation learning for multi-fingered hands, enabling precise and adaptive manipulation. Across a suite of challenging real-world benchmarks, our method achieves approximately 50% higher success rates than prior state-of-the-art systems. To our knowledge, it is also the first to autonomously complete long-horizon dexterous manipulation tasks that demand highly precise control with an anthropomorphic hand, successfully executing up to 11 sequential stages and sustaining continuous operation for 2.5 minutes.