Daily Papers

AI Video Assistant emerges as a new paradigm for Real-time Communication (RTC), where one peer is a Multimodal Large Language Model (MLLM) deployed in the cloud. This makes interaction between humans and AI more intuitive, akin to chatting with a real person. However, a fundamental mismatch exists between current RTC frameworks and AI Video Assistants, stemming from the drastic shift in Quality of Experience (QoE) and more challenging networks. Measurements on our production prototype also confirm that current RTC fails, causing latency spikes and accuracy drops. To address these challenges, we propose Artic, an AI-oriented RTC framework for MLLM Video Assistants, exploring the shift from "humans watching video" to "AI understanding video." Specifically, Artic proposes: (1) Response Capability-aware Adaptive Bitrate, which utilizes MLLM accuracy saturation to proactively cap bitrate, reserving bandwidth headroom to absorb future fluctuations for latency reduction; (2) Zero-overhead Context-aware Streaming, which allocates limited bitrate to regions most important for the response, maintaining accuracy even under ultra-low bitrates; and (3) Degraded Video Understanding Benchmark, the first benchmark evaluating how RTC-induced video degradation affects MLLM accuracy. Prototype experiments using real-world uplink traces show that compared with existing methods, Artic significantly improves accuracy by 15.12% and reduces latency by 135.31 ms. We will release the benchmark and codes at https://github.com/pku-netvideo/DeViBench.

AI Video Chat emerges as a new paradigm for Real-time Communication (RTC), where one peer is not a human, but a Multimodal Large Language Model (MLLM). This makes interaction between humans and AI more intuitive, as if chatting face-to-face with a real person. However, this poses significant challenges to latency, because the MLLM inference takes up most of the response time, leaving very little time for video streaming. Due to network uncertainty and instability, transmission latency becomes a critical bottleneck preventing AI from being like a real person. To address this, we propose Artic, an AI-oriented Real-time Communication framework, exploring the network requirement shift from "humans watching video" to "AI understanding video". To reduce bitrate dramatically while maintaining MLLM accuracy, we propose Context-Aware Video Streaming that recognizes the importance of each video region for chat and allocates bitrate almost exclusively to chat-important regions. To avoid packet retransmission, we propose Loss-Resilient Adaptive Frame Rate that leverages previous frames to substitute for lost/delayed frames while avoiding bitrate waste. To evaluate the impact of video streaming quality on MLLM accuracy, we build the first benchmark, named Degraded Video Understanding Benchmark (DeViBench). Finally, we discuss some open questions and ongoing solutions for AI Video Chat.

With the rapid advancement of speech generation technologies, the threat posed by speech deepfakes in real-time communication (RTC) scenarios has intensified. However, existing detection studies mainly focus on offline simulations and struggle to cope with the complex distortions introduced during RTC transmission, including unknown speech enhancement processes (e.g., noise suppression) and codec compression. To address this challenge, we present the first large-scale speech deepfake dataset tailored for RTC scenarios, termed RTCFake, totaling approximately 600 hours. The dataset is constructed by transmitting speech through multiple mainstream social media and conferencing platforms (e.g., Zoom), enabling precise pairing between offline and online speech. In addition, we propose a phoneme-guided consistency learning (PCL) strategy that enforces models to learn platform-invariant semantic structural representations. In this paper, the RTCFake dataset is divided into training, development, and evaluation sets. The evaluation set further includes both unseen RTC platforms and unseen complex noise conditions, thereby providing a more realistic and challenging evaluation benchmark for speech deepfake detection. Furthermore, the proposed PCL strategy achieves significant improvements in both cross-platform generalization and noise robustness, offering an effective and generalizable modeling paradigm. The RTCFake dataset is provided in the {https://huggingface.co/datasets/JunXueTech/RTCFake}.

Diffusion-based generative models have greatly impacted the speech processing field in recent years, exhibiting high speech naturalness and spawning a new research direction. Their application in real-time communication is, however, still lagging behind due to their computation-heavy nature involving multiple calls of large DNNs. Here, we present Stream.FM, a frame-causal flow-based generative model with an algorithmic latency of 32 milliseconds (ms) and a total latency of 48 ms, paving the way for generative speech processing in real-time communication. We propose a buffered streaming inference scheme and an optimized DNN architecture, show how learned few-step numerical solvers can boost output quality at a fixed compute budget, explore model weight compression to find favorable points along a compute/quality tradeoff, and contribute a model variant with 24 ms total latency for the speech enhancement task. Our work looks beyond theoretical latencies, showing that high-quality streaming generative speech processing can be realized on consumer GPUs available today. Stream.FM can solve a variety of speech processing tasks in a streaming fashion: speech enhancement, dereverberation, codec post-filtering, bandwidth extension, STFT phase retrieval, and Mel vocoding. As we verify through comprehensive evaluations and a MUSHRA listening test, Stream.FM establishes a state-of-the-art for generative streaming speech restoration, exhibits only a reasonable reduction in quality compared to a non-streaming variant, and outperforms our recent work (Diffusion Buffer) on generative streaming speech enhancement while operating at a lower latency.

With the rapid development of big data and edge computing, many researchers focus on improving the accuracy of bearing fault classification using deep learning models, and implementing the deep learning classification model on limited resource platforms such as STM32. To this end, this paper realizes the identification of bearing fault vibration signal based on convolutional neural network, the fault identification accuracy of the optimised model can reach 98.9%. In addition, this paper successfully applies the convolutional neural network model to STM32H743VI microcontroller, the running time of each diagnosis is 19ms. Finally, a complete real-time communication framework between the host computer and the STM32 is designed, which can perfectly complete the data transmission through the serial port and display the diagnosis results on the TFT-LCD screen.

We present StreamVC, a streaming voice conversion solution that preserves the content and prosody of any source speech while matching the voice timbre from any target speech. Unlike previous approaches, StreamVC produces the resulting waveform at low latency from the input signal even on a mobile platform, making it applicable to real-time communication scenarios like calls and video conferencing, and addressing use cases such as voice anonymization in these scenarios. Our design leverages the architecture and training strategy of the SoundStream neural audio codec for lightweight high-quality speech synthesis. We demonstrate the feasibility of learning soft speech units causally, as well as the effectiveness of supplying whitened fundamental frequency information to improve pitch stability without leaking the source timbre information.

Online education platforms, leveraging the internet to distribute education resources, seek to provide convenient education but often fall short in real-time communication with students. They often struggle to offer personalized education resources due to the challenge of addressing the diverse obstacles students encounter throughout their learning journey. Recently, the emergence of large language models (LLMs), such as ChatGPT, offers the possibility for resolving this issue by comprehending individual requests. Although LLMs have been successful in various fields, creating an LLM-based education system is still challenging for the wide range of educational skills required. This paper reviews the recently emerged LLM researches related to educational capabilities, including mathematics, writing, programming, reasoning, and knowledge-based question answering, with the aim to explore their potential in constructing the next-generation intelligent education system. Based on the current development status, we further outline two approaches for an LLM-based education system: a unified approach and a mixture-of-expert (MoE) approach. Finally, we explore the challenges and future directions, providing new research opportunities and perspectives on adapting LLMs for education.

Zero-shot online voice conversion (VC) holds significant promise for real-time communications and entertainment. However, current VC models struggle to preserve semantic fidelity under real-time constraints, deliver natural-sounding conversions, and adapt effectively to unseen speaker characteristics. To address these challenges, we introduce Conan, a chunkwise online zero-shot voice conversion model that preserves the content of the source while matching the voice timbre and styles of reference speech. Conan comprises three core components: 1) a Stream Content Extractor that leverages Emformer for low-latency streaming content encoding; 2) an Adaptive Style Encoder that extracts fine-grained stylistic features from reference speech for enhanced style adaptation; 3) a Causal Shuffle Vocoder that implements a fully causal HiFiGAN using a pixel-shuffle mechanism. Experimental evaluations demonstrate that Conan outperforms baseline models in subjective and objective metrics. Audio samples can be found at https://aaronz345.github.io/ConanDemo.

Commonly used datasets for evaluating video codecs are all very high quality and not representative of video typically used in video conferencing scenarios. We present the Video Conferencing Dataset (VCD) for evaluating video codecs for real-time communication, the first such dataset focused on video conferencing. VCD includes a wide variety of camera qualities and spatial and temporal information. It includes both desktop and mobile scenarios and two types of video background processing. We report the compression efficiency of H.264, H.265, H.266, and AV1 in low-delay settings on VCD and compare it with the non-video conferencing datasets UVC, MLC-JVC, and HEVC. The results show the source quality and the scenarios have a significant effect on the compression efficiency of all the codecs. VCD enables the evaluation and tuning of codecs for this important scenario. The VCD is publicly available as an open-source dataset at https://github.com/microsoft/VCD.

Simultaneous speech-to-speech translation (Simul-S2ST, a.k.a streaming speech translation) outputs target speech while receiving streaming speech inputs, which is critical for real-time communication. Beyond accomplishing translation between speech, Simul-S2ST requires a policy to control the model to generate corresponding target speech at the opportune moment within speech inputs, thereby posing a double challenge of translation and policy. In this paper, we propose StreamSpeech, a direct Simul-S2ST model that jointly learns translation and simultaneous policy in a unified framework of multi-task learning. Adhering to a multi-task learning approach, StreamSpeech can perform offline and simultaneous speech recognition, speech translation and speech synthesis via an "All-in-One" seamless model. Experiments on CVSS benchmark demonstrate that StreamSpeech achieves state-of-the-art performance in both offline S2ST and Simul-S2ST tasks. Besides, StreamSpeech is able to present high-quality intermediate results (i.e., ASR or translation results) during simultaneous translation process, offering a more comprehensive real-time communication experience.

Autonomous vehicles (AVs) are more vulnerable to network attacks due to the high connectivity and diverse communication modes between vehicles and external networks. Deep learning-based Intrusion detection, an effective method for detecting network attacks, can provide functional safety as well as a real-time communication guarantee for vehicles, thereby being widely used for AVs. Existing works well for cyber-attacks such as simple-mode but become a higher false alarm with a resource-limited environment required when the attack is concealed within a contextual feature. In this paper, we present a novel automotive intrusion detection model with lightweight attribution and semantic fusion, named LSF-IDM. Our motivation is based on the observation that, when injected the malicious packets to the in-vehicle networks (IVNs), the packet log presents a strict order of context feature because of the periodicity and broadcast nature of the CAN bus. Therefore, this model first captures the context as the semantic feature of messages by the BERT language framework. Thereafter, the lightweight model (e.g., BiLSTM) learns the fused feature from an input packet's classification and its output distribution in BERT based on knowledge distillation. Experiment results demonstrate the effectiveness of our methods in defending against several representative attacks from IVNs. We also perform the difference analysis of the proposed method with lightweight models and Bert to attain a deeper understanding of how the model balance detection performance and model complexity.

Google's congestion control (GCC) has become a cornerstone for real-time video and audio communication, yet its performance remains fragile in emerging Low Earth Orbit (LEO) networks. Sparse direct-to-device constellations offer longer duration links and reduced handover frequency compared to dense deployments, presenting a unique opportunity for high-quality real-time communication (RTC) in environments with limited terrestrial network infrastructure. In this paper, we study the behavior of videoconferencing systems in sparse LEO constellations. We observe that video quality degrades due to inherent delays and network instability introduced by the high altitude and rapid movement of LEO satellites, with these effects exacerbated by WebRTC's conventional ``one-size-fits-all'' sender-side pacing queue management. To boost RTC performance, we introduce a data-driven queue management mechanism that adapts the maximum pacing queue capacity based on predicted handover activity. Specifically, our approach employs shorter queue limits during stable, no-handover phases to prioritize low latency communication, and preemptively increases pacing queue capacity when entering periods of increased handover activity to absorb disruptions. Our method yields up to 3x improvements in video bitrate and reduces freeze rate by 62% compared to default WebRTC.

Collecting and annotating task-oriented dialog data is difficult, especially for highly specific domains that require expert knowledge. At the same time, informal communication channels such as instant messengers are increasingly being used at work. This has led to a lot of work-relevant information that is disseminated through those channels and needs to be post-processed manually by the employees. To alleviate this problem, we present TexPrax, a messaging system to collect and annotate problems, causes, and solutions that occur in work-related chats. TexPrax uses a chatbot to directly engage the employees to provide lightweight annotations on their conversation and ease their documentation work. To comply with data privacy and security regulations, we use an end-to-end message encryption and give our users full control over their data which has various advantages over conventional annotation tools. We evaluate TexPrax in a user-study with German factory employees who ask their colleagues for solutions on problems that arise during their daily work. Overall, we collect 202 task-oriented German dialogues containing 1,027 sentences with sentence-level expert annotations. Our data analysis also reveals that real-world conversations frequently contain instances with code-switching, varying abbreviations for the same entity, and dialects which NLP systems should be able to handle.

We propose DarkStream, a streaming speech synthesis model for real-time speaker anonymization. To improve content encoding under strict latency constraints, DarkStream combines a causal waveform encoder, a short lookahead buffer, and transformer-based contextual layers. To further reduce inference time, the model generates waveforms directly via a neural vocoder, thus removing intermediate mel-spectrogram conversions. Finally, DarkStream anonymizes speaker identity by injecting a GAN-generated pseudo-speaker embedding into linguistic features from the content encoder. Evaluations show our model achieves strong anonymization, yielding close to 50% speaker verification EER (near-chance performance) on the lazy-informed attack scenario, while maintaining acceptable linguistic intelligibility (WER within 9%). By balancing low-latency, robust privacy, and minimal intelligibility degradation, DarkStream provides a practical solution for privacy-preserving real-time speech communication.

Simultaneous speech-to-speech translation (SimulS2S) is essential for real-time multilingual communication, with increasing integration into meeting and streaming platforms. Despite this, SimulS2S remains underexplored in research, where current solutions often rely on resource-intensive training procedures and operate on short-form, pre-segmented utterances, failing to generalize to continuous speech. To bridge this gap, we propose SimulU, the first training-free policy for long-form SimulS2S. SimulU adopts history management and speech output selection strategies that exploit cross-attention in pre-trained end-to-end models to regulate both input history and output generation. Evaluations on MuST-C across 8 languages show that SimulU achieves a better or comparable quality-latency trade-off against strong cascaded models. By eliminating the need for ad-hoc training, SimulU offers a promising path to end-to-end SimulS2S in realistic, long-form scenarios.

In this paper, we present a low-budget and high-authenticity bidirectional telepresence system, Tele-Aloha, targeting peer-to-peer communication scenarios. Compared to previous systems, Tele-Aloha utilizes only four sparse RGB cameras, one consumer-grade GPU, and one autostereoscopic screen to achieve high-resolution (2048x2048), real-time (30 fps), low-latency (less than 150ms) and robust distant communication. As the core of Tele-Aloha, we propose an efficient novel view synthesis algorithm for upper-body. Firstly, we design a cascaded disparity estimator for obtaining a robust geometry cue. Additionally a neural rasterizer via Gaussian Splatting is introduced to project latent features onto target view and to decode them into a reduced resolution. Further, given the high-quality captured data, we leverage weighted blending mechanism to refine the decoded image into the final resolution of 2K. Exploiting world-leading autostereoscopic display and low-latency iris tracking, users are able to experience a strong three-dimensional sense even without any wearable head-mounted display device. Altogether, our telepresence system demonstrates the sense of co-presence in real-life experiments, inspiring the next generation of communication.

While many current neural speech codecs achieve impressive reconstructed speech quality, they often neglect latency and complexity considerations, limiting their practical deployment in downstream tasks such as real-time speech communication and efficient speech compression. In our previous work, we proposed StreamCodec, which enables streamable speech coding by leveraging model causalization and a scalar-vector-combined quantization strategy, but its reconstructed quality and complexity still have room for improvement. Therefore, this paper proposes an improved iteration of StreamCodec, named StreamCodec2. The StreamCodec2 supports streamable and lightweight speech coding by adopting a fully causal architecture and reducing the convolutional channels. To compensate for the speech quality degradation caused by model causalization and pruning, we introduce a non-causal, high-complexity teacher codec to guide the training of StreamCodec2 through knowledge distillation. Experimental results demonstrate that our proposed StreamCodec2, trained with the knowledge distillation strategy, can achieve high-quality speech reconstruction while maintaining low latency (only 20 ms), low computational complexity (only 910 MFLOPs), and low model complexity (only 5.4 M parameters).

Real-time urban traffic surveillance is vital for Intelligent Transportation Systems (ITS) to ensure road safety, optimize traffic flow, track vehicle trajectories, and prevent collisions in smart cities. Deploying edge cameras across urban environments is a standard practice for monitoring road conditions. However, integrating these with intelligent models requires a robust understanding of dynamic traffic scenarios and a responsive interface for user interaction. Although multimodal Large Language Models (LLMs) can interpret traffic images and generate informative responses, their deployment on edge devices is infeasible due to high computational demands. Therefore, LLM inference must occur on the cloud, necessitating visual data transmission from edge to cloud, a process hindered by limited bandwidth, leading to potential delays that compromise real-time performance. To address this challenge, we propose a semantic communication framework that significantly reduces transmission overhead. Our method involves detecting Regions of Interest (RoIs) using YOLOv11, cropping relevant image segments, and converting them into compact embedding vectors using a Vision Transformer (ViT). These embeddings are then transmitted to the cloud, where an image decoder reconstructs the cropped images. The reconstructed images are processed by a multimodal LLM to generate traffic condition descriptions. This approach achieves a 99.9% reduction in data transmission size while maintaining an LLM response accuracy of 89% for reconstructed cropped images, compared to 93% accuracy with original cropped images. Our results demonstrate the efficiency and practicality of ViT and LLM-assisted edge-cloud semantic communication for real-time traffic surveillance.

Vehicle-to-Everything communications-assisted Autonomous Driving (V2X-AD) has witnessed remarkable advancements in recent years, with pragmatic communications (PragComm) emerging as a promising paradigm for real-time collaboration among vehicles and other agents.Simultaneously, extensive research has explored the interplay between collaborative perception and decision-making in end-to-end driving frameworks.In this work, we revisit the collaborative driving problem and propose the Select2Drive framework to optimize the utilization of limited computational and communication resources.Particularly, to mitigate cumulative latency in perception and decision-making, Select2Drive introduces Distributed Predictive Perception (DPP) by formulating an active prediction paradigm and simplifies high-dimensional semantic feature prediction into computation cost-efficient, motion-aware reconstruction. Given the "less is more" principle that a broadened perceptual horizon possibly confuses the decision module rather than contributing to it, Select2Drive utilizes Area-of-Importance-based PragComm (APC) to prioritize the communications of critical regions, thus boosting both communication efficiency and decision-making efficacy. Empirical evaluations on the V2Xverse dataset and CARLA driving simulator demonstrate that Select2Drive achieves a 11.31% (resp. 7.69%) improvement in offline perception tasks under limited bandwidth (resp. pose error conditions). Moreover, it delivers at most 14.68% and 31.76% enhancement in closed-loop driving scores and route completion rates, particularly in scenarios characterized by dense traffic and high-speed dynamics.

Collaborative perception enhances sensing in multirobot and vehicular networks by fusing information from multiple agents, improving perception accuracy and sensing range. However, mobility and non-rigid sensor mounts introduce extrinsic calibration errors, necessitating online calibration, further complicated by limited overlap in sensing regions. Moreover, maintaining fresh information is crucial for timely and accurate sensing. To address calibration errors and ensure timely and accurate perception, we propose a robust task-oriented communication strategy to optimize online self-calibration and efficient feature sharing for Real-time Adaptive Collaborative Perception (R-ACP). Specifically, we first formulate an Age of Perceived Targets (AoPT) minimization problem to capture data timeliness of multi-view streaming. Then, in the calibration phase, we introduce a channel-aware self-calibration technique based on reidentification (Re-ID), which adaptively compresses key features according to channel capacities, effectively addressing calibration issues via spatial and temporal cross-camera correlations. In the streaming phase, we tackle the trade-off between bandwidth and inference accuracy by leveraging an Information Bottleneck (IB) based encoding method to adjust video compression rates based on task relevance, thereby reducing communication overhead and latency. Finally, we design a priority-aware network to filter corrupted features to mitigate performance degradation from packet corruption. Extensive studies demonstrate that our framework outperforms five baselines, improving multiple object detection accuracy (MODA) by 25.49% and reducing communication costs by 51.36% under severely poor channel conditions. Code will be made publicly available: github.com/fangzr/R-ACP.

Toxic interactions during code reviews can undermine teamwork and hinder productivity in software engineering (SE) teams. While prior studies explore toxicity detection and empirical investigation, they lack real-time detoxification tools to support the SE community. To address this gap, we present ToxiShield, a browser extension for GitHub pull requests that is built using three modules: i) Toxicity Filter -- to identify whether a text is toxic, ii) Communication coach -- to facilitate just-in-time fine-grained toxicity categorization with explanations, and iii) The Reframer -- that generates a revised, constructive alternative of a toxic text. For each module, we trained and evaluated multiple deep learning and Large Language Models (LLMs) to identify the best choice. A BERT-based binary detection model, trained on 38,761 code review samples, achieves 98% accuracy and an F1-score of 97% and is the selected one for the Toxicity Filter module. For the Communication Coach, prompt-tuned Claude 3.5 Sonnet achieved the best performance with 39% MCC and 42% F1 in multiclass toxicity classification with detailed reasoning. For Reframer, we evaluated five LLMs using a fine-tuning strategy on a dataset of 10,120 code review comments. The fine-tuned Llama 3.2 model achieves 95.27% style transfer accuracy, 97.03% fluency, 67.07% content preservation, and an 84% J-score. We further validated ToxiShield through a human evaluation using the Technology Acceptance Model with 10 participants, confirming its perceived usefulness and ease of adoption. ToxiShield sets a benchmark for advancing constructive communication in software engineering, driving inclusivity and healthier collaboration in open-source communities.

This paper introduces a parallel and asynchronous Transformer framework designed for efficient and accurate multilingual lip synchronization in real-time video conferencing systems. The proposed architecture integrates translation, speech processing, and lip-synchronization modules within a pipeline-parallel design that enables concurrent module execution through message-queue-based decoupling, reducing end-to-end latency by up to 3.1 times compared to sequential approaches. To enhance computational efficiency and throughput, the inference workflow of each module is optimized through low-level graph compilation, mixed-precision quantization, and hardware-accelerated kernel fusion. These optimizations provide substantial gains in efficiency while preserving model accuracy and visual quality. In addition, a context-adaptive silence-detection component segments the input speech stream at semantically coherent boundaries, improving translation consistency and temporal alignment across languages. Experimental results demonstrate that the proposed parallel architecture outperforms conventional sequential pipelines in processing speed, synchronization stability, and resource utilization. The modular, message-oriented design makes this work applicable to resource-constrained IoT communication scenarios including telemedicine, multilingual kiosks, and remote assistance systems. Overall, this work advances the development of low-latency, resource-efficient multimodal communication frameworks for next-generation AIoT systems.

LiDARs are widely used in autonomous robots due to their ability to provide accurate environment structural information. However, the large size of point clouds poses challenges in terms of data storage and transmission. In this paper, we propose a novel point cloud compression and transmission framework for resource-constrained robotic applications, called RCPCC. We iteratively fit the surface of point clouds with a similar range value and eliminate redundancy through their spatial relationships. Then, we use Shape-adaptive DCT (SA-DCT) to transform the unfit points and reduce the data volume by quantizing the transformed coefficients. We design an adaptive bitrate control strategy based on QoE as the optimization goal to control the quality of the transmitted point cloud. Experiments show that our framework achieves compression rates of 40times to 80times while maintaining high accuracy for downstream applications. our method significantly outperforms other baselines in terms of accuracy when the compression rate exceeds 70times. Furthermore, in situations of reduced communication bandwidth, our adaptive bitrate control strategy demonstrates significant QoE improvements. The code will be available at https://github.com/HITSZ-NRSL/RCPCC.git.

Face-to-face communication modeling in computer vision is an area of research focusing on developing algorithms that can recognize and analyze non-verbal cues and behaviors during face-to-face interactions. We propose an alternative to text chats for Human-AI interaction, based on non-verbal visual communication only, using facial expressions and head movements that mirror, but also improvise over the human user, to efficiently engage with the users, and capture their attention in a low-cost and real-time fashion. Our goal is to track and analyze facial expressions, and other non-verbal cues in real-time, and use this information to build models that can predict and understand human behavior. We offer three different complementary approaches, based on retrieval, statistical, and deep learning techniques. We provide human as well as automatic evaluations and discuss the advantages and disadvantages of each direction.

Real-time face orientation recognition is a cutting-edge technology meant to track and analyze facial movements in virtual environments such as online interviews, remote meetings, and virtual classrooms. As the demand for virtual interactions grows, it becomes increasingly important to measure participant engagement, attention, and overall interaction. This research presents a novel solution that leverages the Media Pipe Face Mesh framework to identify facial landmarks and extract geometric data for calculating Euler angles, which determine head orientation in real time. The system tracks 3D facial landmarks and uses this data to compute head movements with a focus on accuracy and responsiveness. By studying Euler angles, the system can identify a user's head orientation with an accuracy of 90\%, even at a distance of up to four feet. This capability offers significant enhancements for monitoring user interaction, allowing for more immersive and interactive virtual ex-periences. The proposed method shows its reliability in evaluating participant attentiveness during online assessments and meetings. Its application goes beyond engagement analysis, potentially providing a means for improving the quality of virtual communication, fostering better understanding between participants, and ensuring a higher level of interaction in digital spaces. This study offers a basis for future developments in enhancing virtual user experiences by integrating real-time facial tracking technologies, paving the way for more adaptive and interactive web-based platform.

Reconstructing 3D human appearance from a single image is crucial for achieving holographic communication and immersive social experiences. However, this remains a challenge for existing methods, which typically rely on multi-camera setups or are limited to offline operations. In this paper, we propose R^2Human, the first approach for real-time inference and rendering of photorealistic 3D human appearance from a single image. The core of our approach is to combine the strengths of implicit texture fields and explicit neural rendering with our novel representation, namely Z-map. Based on this, we present an end-to-end network that performs high-fidelity color reconstruction of visible areas and provides reliable color inference for occluded regions. To further enhance the 3D perception ability of our network, we leverage the Fourier occupancy field to reconstruct a detailed 3D geometry, which serves as a prior for the texture field generation and provides a sampling surface in the rendering stage. Experiments show that our end-to-end method achieves state-of-the-art performance on both synthetic data and challenging real-world images and even outperforms many offline methods. The project page is available for research purposes at http://cic.tju.edu.cn/faculty/likun/projects/R2Human.

Face-to-face communication, as a common human activity, motivates the research on interactive head generation. A virtual agent can generate motion responses with both listening and speaking capabilities based on the audio or motion signals of the other user and itself. However, previous clip-wise generation paradigm or explicit listener/speaker generator-switching methods have limitations in future signal acquisition, contextual behavioral understanding, and switching smoothness, making it challenging to be real-time and realistic. In this paper, we propose an autoregressive (AR) based frame-wise framework called ARIG to realize the real-time generation with better interaction realism. To achieve real-time generation, we model motion prediction as a non-vector-quantized AR process. Unlike discrete codebook-index prediction, we represent motion distribution using diffusion procedure, achieving more accurate predictions in continuous space. To improve interaction realism, we emphasize interactive behavior understanding (IBU) and detailed conversational state understanding (CSU). In IBU, based on dual-track dual-modal signals, we summarize short-range behaviors through bidirectional-integrated learning and perform contextual understanding over long ranges. In CSU, we use voice activity signals and context features of IBU to understand the various states (interruption, feedback, pause, etc.) that exist in actual conversations. These serve as conditions for the final progressive motion prediction. Extensive experiments have verified the effectiveness of our model.

Humanoid facial expression shadowing enables robots to realistically imitate human facial expressions in real time, which is critical for lifelike, facially expressive humanoid robots and affective human-robot interaction. Existing progress in humanoid facial expression imitation remains limited, often failing to achieve either real-time performance or realistic expressiveness due to offline video-based inference designs and insufficient ability to capture and transfer subtle expression details. To address these limitations, we present VividFace, a real-time and realistic facial expression shadowing system for humanoid robots. An optimized imitation framework X2CNet++ enhances expressiveness by fine-tuning the human-to-humanoid facial motion transfer module and introducing a feature-adaptation training strategy for better alignment across different image sources. Real-time shadowing is further enabled by a video-stream-compatible inference pipeline and a streamlined workflow based on asynchronous I/O for efficient communication across devices. VividFace produces vivid humanoid faces by mimicking human facial expressions within 0.05 seconds, while generalizing across diverse facial configurations. Extensive real-world demonstrations validate its practical utility. Videos are available at: https://lipzh5.github.io/VividFace/.

With the wide adoption of AI applications, there is a pressing need of enabling real-time neural network (NN) inference on small embedded devices, but deploying NNs and achieving high performance of NN inference on these small devices is challenging due to their extremely weak capabilities. Although NN partitioning and offloading can contribute to such deployment, they are incapable of minimizing the local costs at embedded devices. Instead, we suggest to address this challenge via agile NN offloading, which migrates the required computations in NN offloading from online inference to offline learning. In this paper, we present AgileNN, a new NN offloading technique that achieves real-time NN inference on weak embedded devices by leveraging eXplainable AI techniques, so as to explicitly enforce feature sparsity during the training phase and minimize the online computation and communication costs. Experiment results show that AgileNN's inference latency is >6x lower than the existing schemes, ensuring that sensory data on embedded devices can be timely consumed. It also reduces the local device's resource consumption by >8x, without impairing the inference accuracy.

Talking head generation creates lifelike avatars from static portraits for virtual communication and content creation. However, current models do not yet convey the feeling of truly interactive communication, often generating one-way responses that lack emotional engagement. We identify two key challenges toward truly interactive avatars: generating motion in real-time under causal constraints and learning expressive, vibrant reactions without additional labeled data. To address these challenges, we propose Avatar Forcing, a new framework for interactive head avatar generation that models real-time user-avatar interactions through diffusion forcing. This design allows the avatar to process real-time multimodal inputs, including the user's audio and motion, with low latency for instant reactions to both verbal and non-verbal cues such as speech, nods, and laughter. Furthermore, we introduce a direct preference optimization method that leverages synthetic losing samples constructed by dropping user conditions, enabling label-free learning of expressive interaction. Experimental results demonstrate that our framework enables real-time interaction with low latency (approximately 500ms), achieving 6.8X speedup compared to the baseline, and produces reactive and expressive avatar motion, which is preferred over 80% against the baseline.

Real-time semantic segmentation presents the dual challenge of designing efficient architectures that capture large receptive fields for semantic understanding while also refining detailed contours. Vision transformers model long-range dependencies effectively but incur high computational cost. To address these challenges, we introduce the Large Kernel Attention (LKA) mechanism. Our proposed Bilateral Efficient Visual Attention Network (BEVANet) expands the receptive field to capture contextual information and extracts visual and structural features using Sparse Decomposed Large Separable Kernel Attentions (SDLSKA). The Comprehensive Kernel Selection (CKS) mechanism dynamically adapts the receptive field to further enhance performance. Furthermore, the Deep Large Kernel Pyramid Pooling Module (DLKPPM) enriches contextual features by synergistically combining dilated convolutions and large kernel attention. The bilateral architecture facilitates frequent branch communication, and the Boundary Guided Adaptive Fusion (BGAF) module enhances boundary delineation by integrating spatial and semantic features under boundary guidance. BEVANet achieves real-time segmentation at 33 FPS, yielding 79.3% mIoU without pretraining and 81.0% mIoU on Cityscapes after ImageNet pretraining, demonstrating state-of-the-art performance. The code and model is available at https://github.com/maomao0819/BEVANet.

Sign Language Recognition (SLR) plays a crucial role in bridging the communication gap between the hearing-impaired community and society. This paper introduces SLRNet, a real-time webcam-based ASL recognition system using MediaPipe Holistic and Long Short-Term Memory (LSTM) networks. The model processes video streams to recognize both ASL alphabet letters and functional words. With a validation accuracy of 86.7%, SLRNet demonstrates the feasibility of inclusive, hardware-independent gesture recognition.

Multimodal models are increasingly deployed to solve tasks collaboratively with humans or other artificial agents. Existing benchmarks show that these models possess many of the required component capabilities, but the conditions that coincide in collaboration, including time pressure, information asymmetry, and imperfect communication, are usually studied in isolation. We introduce GPTNT, a benchmark built on the cooperative video game Keep Talking and Nobody Explodes, in which two agents must coordinate to defuse procedurally generated bomb puzzles against a live countdown. One agent can see and manipulate the bomb but does not have the defusal instructions; the other has the instructions but cannot see or manipulate the bomb. Neither agent can succeed alone: success requires effective and efficient communication. Unlike turn-based proxies, GPTNT requires agents to act asynchronously and communicate in real time. GPTNT is designed to separate collaboration from reliance on memorized solutions: the instruction manual, the partner, or both can be withheld to isolate what a model derives in the moment from what it already knows. We show that GPTNT poses a substantial challenge for state-of-the-art systems: none of the closed- or open-source models we test defuses a single bomb in real time, a bar that human players clear. Through controlled experiments, we identify critical weaknesses in state tracking, efficient action under time pressure, ambiguity handling, and error recovery. We release GPTNT as a benchmark for collaborative performance that current evaluations leave unmeasured. Because it runs on the real game, GPTNT benefits from procedural generation and inherits a living modding community, allowing the benchmark to evolve as models improve rather than being solved once and retired.

Current Cyber-Physical Systems (CPS) integrated with Digital Twin (DT) technology face critical limitations in achieving real-time performance for mission-critical industrial applications. Existing 5G-enabled systems suffer from latencies exceeding 10ms, which are inadequate for applications requiring sub-millisecond response times, such as autonomous industrial control and predictive maintenance. This research aims to develop and validate a 6G-enabled Digital Twin framework that achieves ultra-low latency communication and real-time synchronization between physical industrial assets and their digital counterparts, specifically targeting bearing fault detection as a critical industrial use case. The proposed framework integrates terahertz communications (0.1-1 THz), intelligent reflecting surfaces, and edge artificial intelligence within a five-layer architecture. Experimental validation was conducted using the Case Western Reserve University (CWRU) bearing dataset, implementing comprehensive feature extraction (15 time and frequency domain features) and Random Forest classification algorithms. The system performance was evaluated against traditional WiFi-6 and 5G networks across multiple metrics, including classification accuracy, end-to-end latency, and scalability. It achieved 97.7% fault classification accuracy with 0.8ms end-to-end latency, representing a 15.6x improvement over WiFi-6 (12.5ms) and 5.25x improvement over 5G (4.2ms) networks. The system demonstrated superior scalability with sub-linear processing time growth and maintained consistent performance across four bearing fault categories (normal, inner race, outer race, and ball faults) with macro-averaged F1-scores exceeding 97%.

Acoustic echo cancellation (AEC), noise suppression (NS) and dereverberation (DR) are an integral part of modern full-duplex communication systems. As the demand for teleconferencing systems increases, addressing these tasks is required for an effective and efficient online meeting experience. Most prior research proposes solutions for these tasks separately, combining them with digital signal processing (DSP) based components, resulting in complex pipelines that are often impractical to deploy in real-world applications. This paper proposes a real-time cross-attention deep model, named DeepVQE, based on residual convolutional neural networks (CNNs) and recurrent neural networks (RNNs) to simultaneously address AEC, NS, and DR. We conduct several ablation studies to analyze the contributions of different components of our model to the overall performance. DeepVQE achieves state-of-the-art performance on non-personalized tracks from the ICASSP 2023 Acoustic Echo Cancellation Challenge and ICASSP 2023 Deep Noise Suppression Challenge test sets, showing that a single model can handle multiple tasks with excellent performance. Moreover, the model runs in real-time and has been successfully tested for the Microsoft Teams platform.

Channel state information (CSI) is essential for adaptive beamforming and maintaining robust links in wireless communication systems. However, acquiring CSI incurs significant overhead, consuming up to 25% of spectrum resources in 5G networks due to frequent pilot transmissions at millisecond-scale intervals. Recent approaches aim to reduce this burden by reconstructing CSI from spatiotemporal RF measurements, such as signal strength and direction-of-arrival. While effective in offline settings, these methods often suffer from inference latencies in the 5-100 ms range, making them impractical for real-time systems. We present GSpaRC: Gaussian Splatting for Real-time Reconstruction of RF Channels, a method that achieves accurate channel reconstruction with latency in the low-millisecond regime or below. GSpaRC represents the RF environment using a compact set of 3D Gaussian primitives, each parameterized by a lightweight neural model augmented with physics-informed features such as distance-based attenuation. Unlike traditional vision-based splatting pipelines, GSpaRC is tailored for RF reception: it employs an equirectangular projection onto a hemispherical surface centered at the receiver to reflect omnidirectional antenna behavior. A custom CUDA pipeline enables fully parallelized directional sorting, splatting, and rendering across frequency and spatial dimensions. Evaluated on multiple RF datasets, GSpaRC achieves similar CSI reconstruction fidelity to recent state-of-the-art methods while reducing training and inference time by over an order of magnitude. These results illustrate that modest GPU computation can substantially reduce pilot overhead, making GSpaRC a scalable low-latency approach for channel estimation in 5G and future wireless systems.

Realistic 3D full-body talking avatars hold great potential in AR, with applications ranging from e-commerce live streaming to holographic communication. Despite advances in 3D Gaussian Splatting (3DGS) for lifelike avatar creation, existing methods struggle with fine-grained control of facial expressions and body movements in full-body talking tasks. Additionally, they often lack sufficient details and cannot run in real-time on mobile devices. We present TaoAvatar, a high-fidelity, lightweight, 3DGS-based full-body talking avatar driven by various signals. Our approach starts by creating a personalized clothed human parametric template that binds Gaussians to represent appearances. We then pre-train a StyleUnet-based network to handle complex pose-dependent non-rigid deformation, which can capture high-frequency appearance details but is too resource-intensive for mobile devices. To overcome this, we "bake" the non-rigid deformations into a lightweight MLP-based network using a distillation technique and develop blend shapes to compensate for details. Extensive experiments show that TaoAvatar achieves state-of-the-art rendering quality while running in real-time across various devices, maintaining 90 FPS on high-definition stereo devices such as the Apple Vision Pro.

In this paper, we present TalkingMachines -- an efficient framework that transforms pretrained video generation models into real-time, audio-driven character animators. TalkingMachines enables natural conversational experiences by integrating an audio large language model (LLM) with our video generation foundation model. Our primary contributions include: (1) We adapt a pretrained SOTA image-to-video DiT into an audio-driven avatar generation model of 18 billion parameters; (2) We enable infinite video streaming without error accumulation through asymmetric knowledge distillation from a bidirectional teacher model into a sparse causal, autoregressive student model; (3) We design a high-throughput, low-latency inference pipeline incorporating several key engineering optimizations such as: (a) disaggregation of the DiT and VAE decoder across separate devices, (b) efficient overlap of inter-device communication and computation using CUDA streams, (c) elimination of redundant recomputations to maximize frame-generation throughput. Please see demo videos here - https://aaxwaz.github.io/TalkingMachines/

Real-time speech assistants are becoming increasingly popular for ensuring improved accessibility to information. Bengali, being a low-resource language with a high regional dialectal diversity, has seen limited progress in developing such systems. Existing systems are not optimized for real-time use and focus only on standard Bengali. In this work, we present BanglaTalk, the first real-time speech assistance system for Bengali regional dialects. BanglaTalk follows the client-server architecture and uses the Real-time Transport Protocol (RTP) to ensure low-latency communication. To address dialectal variation, we introduce a dialect-aware ASR system, BRDialect, developed by fine-tuning the IndicWav2Vec model in ten Bengali regional dialects. It outperforms the baseline ASR models by 12.41-33.98% on the RegSpeech12 dataset. Furthermore, BanglaTalk can operate at a low bandwidth of 24 kbps while maintaining an average end-to-end delay of 4.9 seconds. Low bandwidth usage and minimal end-to-end delay make the system both cost-effective and interactive for real-time use cases, enabling inclusive and accessible speech technology for the diverse community of Bengali speakers.

High-fidelity digital humans are increasingly used in interactive applications, yet achieving both visual realism and real-time responsiveness remains a major challenge. We present a high-fidelity, real-time conversational digital human system that seamlessly combines a visually realistic 3D avatar, persona-driven expressive speech synthesis, and knowledge-grounded dialogue generation. To support natural and timely interaction, we introduce an asynchronous execution pipeline that coordinates multi-modal components with minimal latency. The system supports advanced features such as wake word detection, emotionally expressive prosody, and highly accurate, context-aware response generation. It leverages novel retrieval-augmented methods, including history augmentation to maintain conversational flow and intent-based routing for efficient knowledge access. Together, these components form an integrated system that enables responsive and believable digital humans, suitable for immersive applications in communication, education, and entertainment.

The transition of cellular networks to (i) software-based systems on commodity hardware and (ii) platforms for services beyond connectivity introduces critical system-level challenges. As sensing emerges as a key feature toward 6G standardization, supporting Integrated Sensing and Communication (ISAC) with limited bandwidth and piggybacking on communication signals, while maintaining high reliability and performance, remains a fundamental challenge. In this paper, we provide two key contributions. First, we present a programmable, open-source framework for processing PHY/MAC signals through real-time, GPU-accelerated Artificial Intelligence (AI) applications on the edge Radio Access Network (RAN) infrastructure. Building on the Open RAN dApp architecture, the framework interfaces with a GPU-accelerated gNB based on NVIDIA Aerial Testbed (ATB), feeding PHY/MAC data to custom AI logic with a framework overhead of 150 us, multiple inference engines, and support for several AI backends. We evaluate the framework on multiple GPU platforms with and without hardware-level GPU isolation. Second, we demonstrate the framework capabilities through cuSense, an indoor localization dApp that consumes uplink DMRS channel estimates, removes static multipath components, and runs a neural network to infer the position of a moving person. Evaluated on a 3GPP-compliant 5G NR deployment, cuSense achieves a mean localization error of 77 cm, with 75% of predictions falling within 1 meter, without dedicated sensing hardware or modifications to the RAN stack or signals. The framework is released as open source, providing a reference design for future AI-native RANs and ISAC applications.

Most vehicle predictive maintenance systems rely exclusively on internal diagnostic signals and are validated on deterministic synthetic data, limiting the credibility of reported metrics. This paper presents a simulation-validated proof-of-concept framework for V2X-augmented predictive maintenance, integrating on-board sensor streams with external contextual signals -- road quality, weather, traffic density, and driver behaviour -- acquired via V2X communication and third-party APIs, with inference at the vehicle edge. Field validation on instrumented vehicles is identified as the required next step. Three experiments address common shortcomings of prior work. A feature group ablation study shows that V2X contextual features contribute a 2.6-point F1 gain, with full context removal reducing macro F1 from 0.855 to 0.807. On the AI4I 2020 real-world industrial failure dataset (10,000 samples, five failure modes), LightGBM achieves AUC-ROC of 0.973 under 5-fold stratified CV with SMOTE confined to training folds. A noise sensitivity analysis shows macro F1 remains above 0.88 under low noise and degrades to 0.74 under very high noise. SHAP analysis confirms that V2X and engineered interaction features rank among the top 15 predictors. Edge inference is estimated to reduce latency from 3.5s to under 1.0s versus cloud-only processing.

We present Wan-Streamer, a native-streaming, end-to-end interactive foundation model designed from the ground up for real-time, low-latency, full-duplex audio-visual interaction. Wan-Streamer seamlessly models language, audio, and video as both input and output within a single Transformer, where the sequence is represented as interleaved visual, audio, and text input tokens together with visual, audio, and text output tokens, coordinated by block-causal attention for incremental streaming. Unlike cascaded interactive systems that rely on separate VAD, ASR, language, TTS, audio-driven animation, or video-generation modules, Wan-Streamer does not rely on external language, speech, avatar, or video-generation modules: perception, reasoning, generation, response timing, turn management, and cross-modal synchronization are learned jointly within one unified model, reducing pipeline latency and error accumulation. To support natural audio-visual responsiveness, we redesign the entire stack around streamability, including causal encoders, causal decoders, block-causal attention, and low-latency multimodal token scheduling, enabling streaming units as short as 160 ms at 25 fps. Wan-Streamer achieves approximately 200 ms model-side response latency and approximately 550 ms total interaction latency when combined with 350 ms bidirectional network latency, supporting sub-second duplex audio-visual communication. These results position Wan-Streamer as a unified, end-to-end, multimodal interactive foundation model for low-latency streaming interaction.

Diffusion-based models have gained wide adoption in the virtual human generation due to their outstanding expressiveness. However, their substantial computational requirements have constrained their deployment in real-time interactive avatar applications, where stringent speed, latency, and duration requirements are paramount. We present a novel audio-driven portrait video generation framework based on the diffusion model to address these challenges. Firstly, we propose robust variable-length video generation to reduce the minimum time required to generate the initial video clip or state transitions, which significantly enhances the user experience. Secondly, we propose a consistency model training strategy for Audio-Image-to-Video to ensure real-time performance, enabling a fast few-step generation. Model quantization and pipeline parallelism are further employed to accelerate the inference speed. To mitigate the stability loss incurred by the diffusion process and model quantization, we introduce a new inference strategy tailored for long-duration video generation. These methods ensure real-time performance and low latency while maintaining high-fidelity output. Thirdly, we incorporate class labels as a conditional input to seamlessly switch between speaking, listening, and idle states. Lastly, we design a novel mechanism for fine-grained facial expression control to exploit our model's inherent capacity. Extensive experiments demonstrate that our approach achieves low-latency, fluid, and authentic two-way communication. On an NVIDIA RTX 4090D, our model achieves a maximum of 78 FPS at a resolution of 384x384 and 45 FPS at a resolution of 512x512, with an initial video generation latency of 140 ms and 215 ms, respectively.

Full-stack multimodal interaction in real-time is a central goal in building intelligent embodied agents capable of natural, dynamic communication. However, existing systems are either limited to unimodal generation or suffer from degraded reasoning and poor cross-modal alignment, preventing coherent and perceptually grounded interactions. In this work, we introduce U-Mind, the first unified system for high-intelligence multimodal dialogue that supports real-time generation and jointly models language, speech, motion, and video synthesis within a single interactive loop. At its core, U-Mind implements a Unified Alignment and Reasoning Framework that addresses two key challenges: enhancing cross-modal synchronization via a segment-wise alignment strategy, and preserving reasoning abilities through Rehearsal-Driven Learning. During inference, U-Mind adopts a text-first decoding pipeline that performs internal chain-of-thought planning followed by temporally synchronized generation across modalities. To close the loop, we implement a real-time video rendering framework conditioned on pose and speech, enabling expressive and synchronized visual feedback. Extensive experiments demonstrate that U-Mind achieves state-of-the-art performance on a range of multimodal interaction tasks, including question answering, instruction following, and motion generation, paving the way toward intelligent, immersive conversational agents.

AI agents powered by Large Language Models (LLMs) have made significant advances, enabling them to assist humans in diverse complex tasks and leading to a revolution in human-AI coordination. LLM-powered agents typically require invoking LLM APIs and employing artificially designed complex prompts, which results in high inference latency. While this paradigm works well in scenarios with minimal interactive demands, such as code generation, it is unsuitable for highly interactive and real-time applications, such as gaming. Traditional gaming AI often employs small models or reactive policies, enabling fast inference but offering limited task completion and interaction abilities. In this work, we consider Overcooked as our testbed where players could communicate with natural language and cooperate to serve orders. We propose a Hierarchical Language Agent (HLA) for human-AI coordination that provides both strong reasoning abilities while keeping real-time execution. In particular, HLA adopts a hierarchical framework and comprises three modules: a proficient LLM, referred to as Slow Mind, for intention reasoning and language interaction, a lightweight LLM, referred to as Fast Mind, for generating macro actions, and a reactive policy, referred to as Executor, for transforming macro actions into atomic actions. Human studies show that HLA outperforms other baseline agents, including slow-mind-only agents and fast-mind-only agents, with stronger cooperation abilities, faster responses, and more consistent language communications.

In the last few years, the Internet throughput, usage and reliability have increased almost exponentially. The introduction of broadband wireless mobile ad hoc networks (MANETs) and cellular networks together with increased computational power have opened the door for a new breed of applications to be created, namely real-time multimedia applications. Delivering real-time multimedia traffic over a complex network like the Internet is a particularly challenging task since these applications have strict quality-of-service (QoS) requirements on bandwidth, delay, and delay jitter. Traditional Internet protocol (IP)-based best effort service is not able to meet these stringent requirements. The time-varying nature of wireless channels and resource constrained wireless devices make the problem even more difficult. To improve perceived media quality by end users over wireless Internet, QoS supports can be addressed in different layers, including application layer, transport layer and link layer. Cross layer design is a well-known approach to achieve this adaptation. In cross-layer design, the challenges from the physical wireless medium and the QoS-demands from the applications are taken into account so that the rate, power, and coding at the physical (PHY) layer can adapted to meet the requirements of the applications given the current channel and network conditions. A number of propositions for cross-layer designs exist in the literature. In this chapter, an extensive review has been made on these cross-layer architectures that combine the application-layer, transport layer and the link layer controls. Particularly, the issues like channel estimation techniques, adaptive controls at the application and link layers for energy efficiency, priority based scheduling, transmission rate control at the transport layer, and adaptive automatic repeat request (ARQ) are discussed in detail.

Semantic communications utilize the transceiver computing resources to alleviate scarce transmission resources, such as bandwidth and energy. Although the conventional deep learning (DL) based designs may achieve certain transmission efficiency, the uninterpretability issue of extracted features is the major challenge in the development of semantic communications. In this paper, we propose an explainable and robust semantic communication framework by incorporating the well-established bit-level communication system, which not only extracts and disentangles features into independent and semantically interpretable features, but also only selects task-relevant features for transmission, instead of all extracted features. Based on this framework, we derive the optimal input for rate-distortion-perception theory, and derive both lower and upper bounds on the semantic channel capacity. Furthermore, based on the β-variational autoencoder (β-VAE), we propose a practical explainable semantic communication system design, which simultaneously achieves semantic features selection and is robust against semantic channel noise. We further design a real-time wireless mobile semantic communication proof-of-concept prototype. Our simulations and experiments demonstrate that our proposed explainable semantic communications system can significantly improve transmission efficiency, and also verify the effectiveness of our proposed robust semantic transmission scheme.

Robots are increasingly being used in dynamic environments like workplaces, hospitals, and homes. As a result, interactions with robots must be simple and intuitive, with robots perception adapting efficiently to human-induced changes. This paper presents a robot control architecture that addresses key challenges in human-robot interaction, with a particular focus on the dynamic creation and continuous update of the robot state representation. The architecture uses Large Language Models to integrate diverse information sources, including natural language commands, robotic skills representation, real-time dynamic semantic mapping of the perceived scene. This enables flexible and adaptive robotic behavior in complex, dynamic environments. Traditional robotic systems often rely on static, pre-programmed instructions and settings, limiting their adaptability to dynamic environments and real-time collaboration. In contrast, this architecture uses LLMs to interpret complex, high-level instructions and generate actionable plans that enhance human-robot collaboration. At its core, the system Perception Module generates and continuously updates a semantic scene graph using RGB-D sensor data, providing a detailed and structured representation of the environment. A particle filter is employed to ensure accurate object localization in dynamic, real-world settings. The Planner Module leverages this up-to-date semantic map to break down high-level tasks into sub-tasks and link them to robotic skills such as navigation, object manipulation (e.g., PICK and PLACE), and movement (e.g., GOTO). By combining real-time perception, state tracking, and LLM-driven communication and task planning, the architecture enhances adaptability, task efficiency, and human-robot collaboration in dynamic environments.

Wireless mesh networks (WMNs) have emerged as a key technology for next generation wireless broadband networks showing rapid progress and inspiring numerous compelling applications. A WMN comprises of a set of mesh routers (MRs) and mesh clients (MCs), where MRs are connected to the Internet backbone through the Internet gateways (IGWs). The MCs are wireless devices and communicate among themselves over possibly multi-hop paths with or without the involvement of MRs. User privacy and security have been primary concerns in WMNs due to their peer-to-peer network topology, shared wireless medium, stringent resource constraints, and highly dynamic environment. Moreover, to support real-time applications, WMNs must also be equipped with robust, reliable and efficient communication protocols so as to minimize the end-to-end latency and packet drops. Design of a secure and efficient communication protocol for WMNs, therefore, is of paramount importance. In this paper, we propose a security and privacy protocol that provides security and user anonymity while maintaining communication efficiency in a WMN. The security protocol ensures secure authentication and encryption in access and the backbone networks. The user anonymity, authentication and data privacy is achieved by application of a protocol that is based on Rivest's ring signature scheme. Simulation results demonstrate that while the protocols have minimal storage and communication overhead, they are robust and provide high level of security and privacy to the users of the network services.

In recent years, research in the area of human-robot interaction has focused on developing robots capable of understanding complex human instructions and performing tasks in dynamic and diverse environments. These systems have a wide range of applications, from personal assistance to industrial robotics, emphasizing the importance of robots interacting flexibly, naturally and safely with humans. This paper presents an advanced architecture for robotic action planning that integrates communication, perception, and planning with Large Language Models (LLMs). Our system is designed to translate commands expressed in natural language into executable robot actions, incorporating environmental information and dynamically updating plans based on real-time feedback. The Planner Module is the core of the system where LLMs embedded in a modified ReAct framework are employed to interpret and carry out user commands. By leveraging their extensive pre-trained knowledge, LLMs can effectively process user requests without the need to introduce new knowledge on the changing environment. The modified ReAct framework further enhances the execution space by providing real-time environmental perception and the outcomes of physical actions. By combining robust and dynamic semantic map representations as graphs with control components and failure explanations, this architecture enhances a robot adaptability, task execution, and seamless collaboration with human users in shared and dynamic environments. Through the integration of continuous feedback loops with the environment the system can dynamically adjusts the plan to accommodate unexpected changes, optimizing the robot ability to perform tasks. Using a dataset of previous experience is possible to provide detailed feedback about the failure. Updating the LLMs context of the next iteration with suggestion on how to overcame the issue.

Semiconductor lasers, one of the key components for optical communication systems, have been rapidly evolving to meet the requirements of next generation optical networks with respect to high speed, low power consumption, small form factor etc. However, these demands have brought severe challenges to the semiconductor laser reliability. Therefore, a great deal of attention has been devoted to improving it and thereby ensuring reliable transmission. In this paper, a predictive maintenance framework using machine learning techniques is proposed for real-time heath monitoring and prognosis of semiconductor laser and thus enhancing its reliability. The proposed approach is composed of three stages: i) real-time performance degradation prediction, ii) degradation detection, and iii) remaining useful life (RUL) prediction. First of all, an attention based gated recurrent unit (GRU) model is adopted for real-time prediction of performance degradation. Then, a convolutional autoencoder is used to detect the degradation or abnormal behavior of a laser, given the predicted degradation performance values. Once an abnormal state is detected, a RUL prediction model based on attention-based deep learning is utilized. Afterwards, the estimated RUL is input for decision making and maintenance planning. The proposed framework is validated using experimental data derived from accelerated aging tests conducted for semiconductor tunable lasers. The proposed approach achieves a very good degradation performance prediction capability with a small root mean square error (RMSE) of 0.01, a good anomaly detection accuracy of 94.24% and a better RUL estimation capability compared to the existing ML-based laser RUL prediction models.

The advent of the sixth-generation (6G) wireless networks, enhanced by artificial intelligence, promises ubiquitous connectivity through Low Earth Orbit (LEO) satellites. These satellites are capable of collecting vast amounts of geographically diverse and real-time data, which can be immensely valuable for training intelligent models. However, limited inter-satellite communication and data privacy constraints hinder data collection on a single server for training. Therefore, we propose SemSpaceFL, a novel hierarchical federated learning (HFL) framework for LEO satellite networks, with integrated semantic communication capabilities. Our framework introduces a two-tier aggregation architecture where satellite models are first aggregated at regional gateways before final consolidation at a cloud server, which explicitly accounts for satellite mobility patterns and energy constraints. The key innovation lies in our novel aggregation approach, which dynamically adjusts the contribution of each satellite based on its trajectory and association with different gateways, which ensures stable model convergence despite the highly dynamic nature of LEO constellations. To further enhance communication efficiency, we incorporate semantic encoding-decoding techniques trained through the proposed HFL framework, which enables intelligent data compression while maintaining signal integrity. Our experimental results demonstrate that the proposed aggregation strategy achieves superior performance and faster convergence compared to existing benchmarks, while effectively managing the challenges of satellite mobility and energy limitations in dynamic LEO networks.

This position paper argues that the field of LLM agents requires a unified, telecom-inspired communication protocol to ensure safety, interoperability, and scalability, especially within the context of Next Generation (NextG) networks. Current ad-hoc communication methods are creating a fragmented ecosystem, reminiscent of the early "protocol wars" in networking, which stifles innovation and poses significant risks. Drawing inspiration from the layered, standardized protocols that underpin modern telecommunications, we propose the LLM-Agent Communication Protocol (LACP). LACP establishes a three-layer architecture designed to ensure semantic clarity in communication, transactional integrity for complex tasks, and robust, built-in security. In this position paper, we argue that adopting a principled, universal protocol is not merely beneficial but essential for realizing the potential of distributed AI. Such a standard is critical for ensuring that multi-agent systems can operate safely and reliably in the complex, real-time applications envisioned for 6G and beyond.

Research into 6G networks has been initiated to support a variety of critical artificial intelligence (AI) assisted applications such as autonomous driving. In such applications, AI-based decisions should be performed in a real-time manner. These decisions include resource allocation, localization, channel estimation, etc. Considering the black-box nature of existing AI-based models, it is highly challenging to understand and trust the decision-making behavior of such models. Therefore, explaining the logic behind those models through explainable AI (XAI) techniques is essential for their employment in critical applications. This manuscript proposes a novel XAI-based channel estimation (XAI-CHEST) scheme that provides detailed reasonable interpretability of the deep learning (DL) models that are employed in doubly-selective channel estimation. The aim of the proposed XAI-CHEST scheme is to identify the relevant model inputs by inducing high noise on the irrelevant ones. As a result, the behavior of the studied DL-based channel estimators can be further analyzed and evaluated based on the generated interpretations. Simulation results show that the proposed XAI-CHEST scheme provides valid interpretations of the DL-based channel estimators for different scenarios.

This paper introduces OSC (Orchestrating Cognitive Synergy), a knowledge-aware adaptive collaboration framework designed to enhance cognitive synergy in multi-agent systems with large language models. While prior work has advanced agent selection and result aggregation, efficient linguistic interactions for deep collaboration among expert agents remain a critical bottleneck. OSC addresses this gap as a pivotal intermediate layer between selection and aggregation, introducing Collaborator Knowledge Models (CKM) to enable each agent to dynamically perceive its collaborators' cognitive states. Through real-time cognitive gap analysis, agents adaptively adjust communication behaviors, including content focus, detail level, and expression style, using learned strategies. Experiments on complex reasoning and problem-solving benchmarks demonstrate that OSC significantly improves task performance and communication efficiency, transforming "parallel-working individuals'' into a "deeply collaborative cognitive team.'' This framework not only optimizes multi-agent collaboration but also offers new insights into LLM agent interaction behaviors.

Communication load is a limiting factor in many real-time systems. Event-triggered state estimation and event-triggered learning methods reduce network communication by sending information only when it cannot be adequately predicted based on previously transmitted data. This paper proposes an event-triggered learning approach for nonlinear discrete-time systems with cyclic excitation. The method automatically recognizes cyclic patterns in data - even when they change repeatedly - and reduces communication load whenever the current data can be accurately predicted from previous cycles. Nonetheless, a bounded error between original and received signal is guaranteed. The cyclic excitation model, which is used for predictions, is updated hierarchically, i.e., a full model update is only performed if updating a small number of model parameters is not sufficient. A nonparametric statistical test enforces that model updates happen only if the cyclic excitation changed with high probability. The effectiveness of the proposed methods is demonstrated using the application example of wireless real-time pitch angle measurements of a human foot in a feedback-controlled neuroprosthesis. The experimental results show that communication load can be reduced by 70 % while the root-mean-square error between measured and received angle is less than 1°.

Achieving full-duplex communication in spoken dialogue systems (SDS) requires real-time coordination between listening, speaking, and thinking. This paper proposes a semantic voice activity detection (VAD) module as a dialogue manager (DM) to efficiently manage turn-taking in full-duplex SDS. Implemented as a lightweight (0.5B) LLM fine-tuned on full-duplex conversation data, the semantic VAD predicts four control tokens to regulate turn-switching and turn-keeping, distinguishing between intentional and unintentional barge-ins while detecting query completion for handling user pauses and hesitations. By processing input speech in short intervals, the semantic VAD enables real-time decision-making, while the core dialogue engine (CDE) is only activated for response generation, reducing computational overhead. This design allows independent DM optimization without retraining the CDE, balancing interaction accuracy and inference efficiency for scalable, next-generation full-duplex SDS.

Image Compression for Machines (ICM) has emerged as a pivotal research direction in the field of visual data compression. However, with the rapid evolution of machine intelligence, the target of compression has shifted from task-specific virtual models to Embodied agents operating in real-world environments. To address the communication constraints of Embodied AI in multi-agent systems and ensure real-time task execution, this paper introduces, for the first time, the scientific problem of Embodied Image Compression. We establish a standardized benchmark, EmbodiedComp, to facilitate systematic evaluation under ultra-low bitrate conditions in a closed-loop setting. Through extensive empirical studies in both simulated and real-world settings, we demonstrate that existing Vision-Language-Action models (VLAs) fail to reliably perform even simple manipulation tasks when compressed below the Embodied bitrate threshold. We anticipate that EmbodiedComp will catalyze the development of domain-specific compression tailored for Embodied agents , thereby accelerating the Embodied AI deployment in the Real-world.

The increasing deployment of autonomous systems in complex environments necessitates efficient communication and task completion among multiple agents. This paper presents SERN (Simulation-Enhanced Realistic Navigation), a novel framework integrating virtual and physical environments for real-time collaborative decision-making in multi-robot systems. SERN addresses key challenges in asset deployment and coordination through our bi-directional SERN ROS Bridge communication framework. Our approach advances the SOTA through: accurate real-world representation in virtual environments using Unity high-fidelity simulator; synchronization of physical and virtual robot movements; efficient ROS data distribution between remote locations; and integration of SOTA semantic segmentation for enhanced environmental perception. Additionally, we introduce a Multi-Metric Cost Function (MMCF) that dynamically balances latency, reliability, computational overhead, and bandwidth consumption to optimize system performance in contested environments. We further provide theoretical justification for synchronization accuracy by proving that the positional error between physical and virtual robots remains bounded under varying network conditions. Our evaluations show a 15% to 24% improvement in latency and up to a 15% increase in processing efficiency compared to traditional ROS setups. Real-world and virtual simulation experiments with multiple robots (Clearpath Jackal and Husky) demonstrate synchronization accuracy, achieving less than 5 cm positional error and under 2^circ rotational error. These results highlight SERN's potential to enhance situational awareness and multi-agent coordination in diverse, contested environments.

This paper introduces Dodoor, an efficient randomized decentralized scheduler designed for task scheduling in modern data centers. Dodoor leverages advanced research on the weighted balls-into-bins model with b-batched setting. Unlike other decentralized schedulers that rely on real-time probing of remote servers, Dodoor makes scheduling decisions based on cached server information, which is updated in batches, to reduce communication overheads. To schedule tasks with dynamic, multidimensional resource requirements in heterogeneous cluster, Dodoor uses a novel load score to measure servers' loads for each scheduled task. This score captures the anti-affinity between servers and tasks in contrast to the commonly used heuristic of counting pending tasks to balance load. On a 101-node heterogeneous cluster, Dodoor is evaluated using two workloads: (i) simulated Azure virtual machines placements and (ii) real serverless Python functions executions in Docker. The evaluation shows that Dodoor reduces scheduling messages by 55--66% on both workloads. Dodoor can also increase throughput by up to 33.2% and 21.5%, reduce mean makespan latency by 12.1% and 7.2%, and improve tail latency by 21.9% and 24.6% across the two workloads.

Remote inference allows lightweight devices to leverage powerful cloud models. However, communication network latency makes predictions stale and unsuitable for real-time tasks. To address this, we introduce Dedelayed, a delay-corrective method that mitigates arbitrary remote inference delays, allowing the local device to produce low-latency outputs in real time. Our method employs a lightweight local model that processes the current frame and fuses in features that a heavyweight remote model computes from past frames. On video from the BDD100K driving dataset, Dedelayed improves semantic segmentation accuracy over the stronger of the local-only and remote-only baselines across all realistic communication network delays beyond 33 ms. Without incurring additional delay, it improves accuracy by 6.4 mIoU compared to fully local inference and 9.8 mIoU compared to remote inference, for a round-trip delay of 100 ms. The advantage grows under longer delays and higher-motion scenes, as delay-mitigated split inference sustains accuracy more effectively, providing clear advantages for real-time tasks that must remain aligned with the current world state.

Telerobotics is a key foundation in autonomous Industrial Cyber-Physical Systems (ICPS), enabling remote operations across various domains. However, conventional cloud-based telerobotics suffers from latency, reliability, scalability, and resilience issues, hindering real-time performance in critical applications. Cloud-Fog Telerobotics (CFTel) builds on the Cloud-Fog Automation (CFA) paradigm to address these limitations by leveraging a distributed Cloud-Edge-Robotics computing architecture, enabling deterministic connectivity, deterministic connected intelligence, and deterministic networked computing. This paper synthesizes recent advancements in CFTel, aiming to highlight its role in facilitating scalable, low-latency, autonomous, and AI-driven telerobotics. We analyze architectural frameworks and technologies that enable them, including 5G Ultra-Reliable Low-Latency Communication, Edge Intelligence, Embodied AI, and Digital Twins. The study demonstrates that CFTel has the potential to enhance real-time control, scalability, and autonomy while supporting service-oriented solutions. We also discuss practical challenges, including latency constraints, cybersecurity risks, interoperability issues, and standardization efforts. This work serves as a foundational reference for researchers, stakeholders, and industry practitioners in future telerobotics research.

Models for low-latency, streaming applications could benefit from the knowledge capacity of larger models, but edge devices cannot run these models due to resource constraints. A possible solution is to transfer hints during inference from a large model running remotely to a small model running on-device. However, this incurs a communication delay that breaks real-time requirements and does not guarantee that both models will operate on the same data at the same time. We propose knowledge boosting, a novel technique that allows a large model to operate on time-delayed input during inference, while still boosting small model performance. Using a streaming neural network that processes 8 ms chunks, we evaluate different speech separation and enhancement tasks with communication delays of up to six chunks or 48 ms. Our results show larger gains where the performance gap between the small and large models is wide, demonstrating a promising method for large-small model collaboration for low-latency applications. Code, dataset, and audio samples available at https://knowledgeboosting.cs.washington.edu/.

This study presents TSLFormer, a light and robust word-level Turkish Sign Language (TSL) recognition model that treats sign gestures as ordered, string-like language. Instead of using raw RGB or depth videos, our method only works with 3D joint positions - articulation points - extracted using Google's Mediapipe library, which focuses on the hand and torso skeletal locations. This creates efficient input dimensionality reduction while preserving important semantic gesture information. Our approach revisits sign language recognition as sequence-to-sequence translation, inspired by the linguistic nature of sign languages and the success of transformers in natural language processing. Since TSLFormer uses the self-attention mechanism, it effectively captures temporal co-occurrence within gesture sequences and highlights meaningful motion patterns as words unfold. Evaluated on the AUTSL dataset with over 36,000 samples and 227 different words, TSLFormer achieves competitive performance with minimal computational cost. These results show that joint-based input is sufficient for enabling real-time, mobile, and assistive communication systems for hearing-impaired individuals.

Full-duplex spoken dialogue systems significantly advance over traditional turn-based dialogue systems, as they allow simultaneous bidirectional communication, closely mirroring human-human interactions. However, achieving low latency and natural interactions in full-duplex dialogue systems remains a significant challenge, especially considering human conversation dynamics such as interruptions, backchannels, and overlapping speech. In this paper, we introduce a novel End-to-End GPT-based model OmniFlatten for full-duplex conversation, capable of effectively modeling the complex behaviors inherent to natural conversations with low latency. To achieve full-duplex communication capabilities, we propose a multi-stage post-training scheme that progressively adapts a text-based large language model (LLM) backbone into a speech-text dialogue LLM, capable of generating text and speech in real time, without modifying the architecture of the backbone LLM. The training process comprises three stages: modality alignment, half-duplex dialogue learning, and full-duplex dialogue learning. Throughout all training stages, we standardize the data using a flattening operation, which allows us to unify the training methods and the model architecture across different modalities and tasks. Our approach offers a straightforward modeling technique and a promising research direction for developing efficient and natural end-to-end full-duplex spoken dialogue systems. Audio samples of dialogues generated by OmniFlatten can be found at this web site (https://omniflatten.github.io/).

Robotics has made remarkable hardware strides-from DARPA's Urban and Robotics Challenges to the first humanoid-robot kickboxing tournament-yet commercial autonomy still lags behind progress in machine learning. A major bottleneck is software: current robot stacks demand steep learning curves, low-level C/C++ expertise, fragmented tooling, and intricate hardware integration, in stark contrast to the Python-centric, well-documented ecosystems that propelled modern AI. We introduce ARK, an open-source, Python-first robotics framework designed to close that gap. ARK presents a Gym-style environment interface that allows users to collect data, preprocess it, and train policies using state-of-the-art imitation-learning algorithms (e.g., ACT, Diffusion Policy) while seamlessly toggling between high-fidelity simulation and physical robots. A lightweight client-server architecture provides networked publisher-subscriber communication, and optional C/C++ bindings ensure real-time performance when needed. ARK ships with reusable modules for control, SLAM, motion planning, system identification, and visualization, along with native ROS interoperability. Comprehensive documentation and case studies-from manipulation to mobile navigation-demonstrate rapid prototyping, effortless hardware swapping, and end-to-end pipelines that rival the convenience of mainstream machine-learning workflows. By unifying robotics and AI practices under a common Python umbrella, ARK lowers entry barriers and accelerates research and commercial deployment of autonomous robots.

Industrial Cyber-Physical Systems (ICPS) technologies are foundational in driving maritime autonomy, particularly for Unmanned Surface Vehicles (USVs). However, onboard computational constraints and communication latency significantly restrict real-time data processing, analysis, and predictive modeling, hence limiting the scalability and responsiveness of maritime ICPS. To overcome these challenges, we propose a distributed Cloud-Edge-IoT architecture tailored for maritime ICPS by leveraging design principles from the recently proposed Cloud-Fog Automation paradigm. Our proposed architecture comprises three hierarchical layers: a Cloud Layer for centralized and decentralized data aggregation, advanced analytics, and future model refinement; an Edge Layer that executes localized AI-driven processing and decision-making; and an IoT Layer responsible for low-latency sensor data acquisition. Our experimental results demonstrated improvements in computational efficiency, responsiveness, and scalability. When compared with our conventional approaches, we achieved a classification accuracy of 86\%, with an improved latency performance. By adopting Cloud-Fog Automation, we address the low-latency processing constraints and scalability challenges in maritime ICPS applications. Our work offers a practical, modular, and scalable framework to advance robust autonomy and AI-driven decision-making and autonomy for intelligent USVs in future maritime ICPS.

Autonomous Vehicles (AVs) have entered the commercialization stage, but their limited ability to interact and express intentions still poses challenges in interactions with Human-driven Vehicles (HVs). Recent advances in large language models (LLMs) enable bidirectional human-machine communication, but the conflict between slow inference speed and the need for real-time decision-making challenges practical deployment. To address these issues, this paper introduces a parallel Actor-Reasoner framework designed to enable explicit bidirectional AV-HV interactions across multiple scenarios. First, by facilitating interactions between the LLM-driven Reasoner and heterogeneous simulated HVs during training, an interaction memory database, referred to as the Actor, is established. Then, by introducing the memory partition module and the two-layer memory retrieval module, the Actor's ability to handle heterogeneous HVs is significantly enhanced. Ablation studies and comparisons with other decision-making methods demonstrate that the proposed Actor-Reasoner framework significantly improves safety and efficiency. Finally, with the combination of the external Human-Machine Interface (eHMI) information derived from Reasoner's reasoning and the feasible action solutions retrieved from the Actor, the effectiveness of the proposed Actor-Reasoner is confirmed in multi-scenario field interactions. Our code is available at https://github.com/FanGShiYuu/Actor-Reasoner.

Digital healthcare infrastructure is crucial for global medical service delivery. Egypt faces EHR adoption barriers: only 314 hospitals had such systems as of Oct 2024. This limits data management and decision-making. This project introduces an EHR system for Egypt's Universal Health Insurance and healthcare ecosystem. It simplifies data management by centralizing medical histories with a scalable micro-services architecture and polyglot persistence for real-time access and provider communication. Clinical workflows are enhanced via patient examination and history tracking. The system uses the Llama3-OpenBioLLM-70B model to generate summaries of medical histories, provide chatbot features, and generate AI-based medical reports, enabling efficient searches during consultations. A Vision Transformer (ViT) aids in pneumonia classification. Evaluations show the AI excels in capturing details (high recall) but needs improvement in concise narratives. With optimization (retrieval-augmented generation, local data fine-tuning, interoperability protocols), this AI-driven EHR could enhance diagnostic support, decision-making, and healthcare delivery in Egypt.

Millimeter-wave (mmWave) communication systems, particularly those leveraging multi-user multiple-input and multiple-output (MU-MIMO) with hybrid beamforming, face challenges in optimizing user throughput and minimizing latency due to the high complexity of dynamic beam selection and management. This paper introduces a deep reinforcement learning (DRL) approach for enhancing user throughput in multi-panel mmWave radio access networks in a practical network setup. Our DRL-based formulation utilizes an adaptive beam management strategy that models the interaction between the communication agent and its environment as a Markov decision process (MDP), optimizing beam selection based on real-time observations. The proposed framework exploits spatial domain (SD) characteristics by incorporating the cross-correlation between the beams in different antenna panels, the measured reference signal received power (RSRP), and the beam usage statistics to dynamically adjust beamforming decisions. As a result, the spectral efficiency is improved and end-to-end latency is reduced. The numerical results demonstrate an increase in throughput of up to 16% and a reduction in latency by factors 3-7x compared to baseline (legacy beam management).

Aerial robots interacting with objects must perform precise, contact-rich maneuvers under uncertainty. In this paper, we study the problem of aerial ball juggling using a quadrotor equipped with a racket, a task that demands accurate timing, stable control, and continuous adaptation. We propose JuggleRL, the first reinforcement learning-based system for aerial juggling. It learns closed-loop policies in large-scale simulation using systematic calibration of quadrotor and ball dynamics to reduce the sim-to-real gap. The training incorporates reward shaping to encourage racket-centered hits and sustained juggling, as well as domain randomization over ball position and coefficient of restitution to enhance robustness and transferability. The learned policy outputs mid-level commands executed by a low-level controller and is deployed zero-shot on real hardware, where an enhanced perception module with a lightweight communication protocol reduces delays in high-frequency state estimation and ensures real-time control. Experiments show that JuggleRL achieves an average of 311 hits over 10 consecutive trials in the real world, with a maximum of 462 hits observed, far exceeding a model-based baseline that reaches at most 14 hits with an average of 3.1. Moreover, the policy generalizes to unseen conditions, successfully juggling a lighter 5 g ball with an average of 145.9 hits. This work demonstrates that reinforcement learning can empower aerial robots with robust and stable control in dynamic interaction tasks.

The real-time deployment of cascaded generative AI pipelines for applications like video translation is constrained by significant system-level challenges. These include the cumulative latency of sequential model inference and the quadratic (O(N^2)) computational complexity that renders multi-user video conferencing applications unscalable. This paper proposes and evaluates a practical system-level framework designed to mitigate these critical bottlenecks. The proposed architecture incorporates a turn-taking mechanism to reduce computational complexity from quadratic to linear in multi-user scenarios, and a segmented processing protocol to manage inference latency for a perceptually real-time experience. We implement a proof-of-concept pipeline and conduct a rigorous performance analysis across a multi-tiered hardware setup, including commodity (NVIDIA RTX 4060), cloud (NVIDIA T4), and enterprise (NVIDIA A100) GPUs. Our objective evaluation demonstrates that the system achieves real-time throughput (τ< 1.0) on modern hardware. A subjective user study further validates the approach, showing that a predictable, initial processing delay is highly acceptable to users in exchange for a smooth, uninterrupted playback experience. The work presents a validated, end-to-end system design that offers a practical roadmap for deploying scalable, real-time generative AI applications in multilingual communication platforms.

Compared to traditional machine learning models, recent large language models (LLMs) can exhibit multi-task-solving capabilities through multiple dialogues and multi-modal data sources. These unique characteristics of LLMs, together with their large model size, make their deployment more challenging. Specifically, (i) deploying LLMs on local devices faces computational, memory, and energy resource issues, while (ii) deploying them in the cloud cannot guarantee real-time service and incurs communication/usage costs. In this paper, we design TMO, a local-cloud LLM inference system with Three-M Offloading: Multi-modal, Multi-task, and Multi-dialogue. TMO incorporates (i) a lightweight local LLM that can process simple tasks at high speed and (ii) a large-scale cloud LLM that can handle multi-modal data sources. We develop a resource-constrained reinforcement learning (RCRL) strategy for TMO that optimizes the inference location (i.e., local vs. cloud) and multi-modal data sources to use for each task/dialogue, aiming to maximize the long-term reward (response quality, latency, and usage cost) while adhering to resource constraints. We also contribute M4A1, a new dataset we curated that contains reward and cost metrics across multiple modality, task, dialogue, and LLM configurations, enabling evaluation of offloading decisions. We demonstrate the effectiveness of TMO compared to several exploration-decision and LLM-as-Agent baselines, showing significant improvements in latency, cost, and response quality.

Embodied conversational agents (ECAs) benefit from non-verbal behavior for natural and efficient interaction with users. Gesticulation - hand and arm movements accompanying speech - is an essential part of non-verbal behavior. Gesture generation models have been developed for several decades: starting with rule-based and ending with mainly data-driven methods. To date, recent end-to-end gesture generation methods have not been evaluated in a real-time interaction with users. We present a proof-of-concept framework, which is intended to facilitate evaluation of modern gesture generation models in interaction. We demonstrate an extensible open-source framework that contains three components: 1) a 3D interactive agent; 2) a chatbot backend; 3) a gesticulating system. Each component can be replaced, making the proposed framework applicable for investigating the effect of different gesturing models in real-time interactions with different communication modalities, chatbot backends, or different agent appearances. The code and video are available at the project page https://nagyrajmund.github.io/project/gesturebot.

Traffic signal control (TSC) is vital for mitigating congestion and sustaining urban mobility. In this paper, we introduce Traffic-R1, a foundation model with human-like reasoning for TSC systems. Our model is developed through self-exploration and iteration of reinforced large language models (LLMs) with expert guidance in a simulated traffic environment. Compared to traditional reinforcement learning (RL) and recent LLM-based methods, Traffic-R1 offers three significant advantages. First, Traffic-R1 delivers zero-shot generalisation, transferring unchanged to new road networks and out-of-distribution incidents by utilizing its internal traffic control policies and human-like reasoning. Second, its 3B-parameter architecture is lightweight enough for real-time inference on mobile-class chips, enabling large-scale edge deployment. Third, Traffic-R1 provides an explainable TSC process and facilitates multi-intersection communication through its self-iteration and a new synchronous communication network. Extensive benchmarks demonstrate that Traffic-R1 sets a new state of the art, outperforming strong baselines and training-intensive RL controllers. In practice, the model now manages signals for more than 55,000 drivers daily, shortening average queues by over 5% and halving operator workload. Our checkpoint is available at https://huggingface.co/Season998/Traffic-R1.

We used machine learning and artificial intelligence: 1) to measure levels of peace in countries from news and social media and 2) to develop on-line tools that promote peace by helping users better understand their own media diet. For news media, we used neural networks to measure levels of peace from text embeddings of on-line news sources. The model, trained on one news media dataset also showed high accuracy when used to analyze a different news dataset. For social media, such as YouTube, we developed other models to measure levels of social dimensions important in peace using word level (GoEmotions) and context level (Large Language Model) methods. To promote peace, we note that 71% of people 20-40 years old daily view most of their news through short videos on social media. Content creators of these videos are biased towards creating videos with emotional activation, making you angry to engage you, to increase clicks. We developed and tested a Chrome extension, MirrorMirror, which provides real-time feedback to YouTube viewers about the peacefulness of the media they are watching. Our long term goal is for MirrorMirror to evolve into an open-source tool for content creators, journalists, researchers, platforms, and individual users to better understand the tone of their media creation and consumption and its effects on viewers. Moving beyond simple engagement metrics, we hope to encourage more respectful, nuanced, and informative communication.

Transportation Cyber-Physical Systems (T-CPS) enhance safety and mobility by integrating cyber and physical transportation systems. A key component of T-CPS is the Digital Twin (DT), a virtual representation that enables simulation, analysis, and optimization through real-time data exchange and communication. Although existing studies have explored DTs for vehicles, communications, pedestrians, and traffic, real-world validations and implementations of DTs that encompass infrastructure, vehicles, signals, communications, and more remain limited due to several challenges. These include accessing real-world connected infrastructure, integrating heterogeneous, multi-sourced data, ensuring real-time data processing, and synchronizing the digital and physical systems. To address these challenges, this study develops a traffic DT based on a real-world connected vehicle corridor. Leveraging the Cellular Vehicle-to-Everything (C-V2X) infrastructure in the corridor, along with communication, computing, and simulation technologies, the proposed DT accurately replicates physical vehicle behaviors, signal timing, communications, and traffic patterns within the virtual environment. Building upon the previous data pipeline, the digital system ensures robust synchronization with the physical environment. Moreover, the DT's scalable and redundant architecture enhances data integrity, making it capable of supporting future large-scale C-V2X deployments. Furthermore, its ability to provide feedback to the physical system is demonstrated through applications such as signal timing adjustments, vehicle advisory messages, and incident notifications. The proposed DT is a vital tool in T-CPS, enabling real-time traffic monitoring, prediction, and optimization to enhance the reliability and safety of transportation systems.

LLMs are used predominantly in synchronous communication, where a human user and a model communicate in alternating turns. In contrast, many real-world settings are inherently asynchronous. For example, in group chats, online team meetings, or social games, there is no inherent notion of turns; therefore, the decision of when to speak forms a crucial part of the participant's decision making. In this work, we develop an adaptive asynchronous LLM-agent which, in addition to determining what to say, also decides when to say it. To evaluate our agent, we collect a unique dataset of online Mafia games, including both human participants, as well as our asynchronous agent. Overall, our agent performs on par with human players, both in game performance, as well as in its ability to blend in with the other human players. Our analysis shows that the agent's behavior in deciding when to speak closely mirrors human patterns, although differences emerge in message content. We release all our data and code to support and encourage further research for more realistic asynchronous communication between LLM agents. This work paves the way for integration of LLMs into realistic human group settings, from assistance in team discussions to educational and professional environments where complex social dynamics must be navigated.

Single-Agent (SA) Reinforcement Learning systems have shown outstanding re-sults on non-stationary problems. However, Multi-Agent Reinforcement Learning(MARL) can surpass SA systems generally and when scaling. Furthermore, MAsystems can be super-powered by collaboration, which can happen through ob-serving others, or a communication system used to share information betweencollaborators. Here, we developed a distributed MA learning mechanism withthe ability to communicate based on decentralised partially observable Markovdecision processes (Dec-POMDPs) and Graph Neural Networks (GNNs). Minimis-ing the time and energy consumed by training Machine Learning models whileimproving performance can be achieved by collaborative MA mechanisms. Wedemonstrate this in a real-world scenario, an offshore wind farm, including a set ofdistributed wind turbines, where the objective is to maximise collective efficiency.Compared to a SA system, MA collaboration has shown significantly reducedtraining time and higher cumulative rewards in unseen and scaled scenarios.

This paper introduces a pioneering approach to artificial intelligence research, embodied in our O1 Replication Journey. In response to the announcement of OpenAI's groundbreaking O1 model, we embark on a transparent, real-time exploration to replicate its capabilities while reimagining the process of conducting and communicating AI research. Our methodology addresses critical challenges in modern AI research, including the insularity of prolonged team-based projects, delayed information sharing, and the lack of recognition for diverse contributions. By providing comprehensive, real-time documentation of our replication efforts, including both successes and failures, we aim to foster open science, accelerate collective advancement, and lay the groundwork for AI-driven scientific discovery. Our research progress report diverges significantly from traditional research papers, offering continuous updates, full process transparency, and active community engagement throughout the research journey. Technologically, we proposed the journey learning paradigm, which encourages models to learn not just shortcuts, but the complete exploration process, including trial and error, reflection, and backtracking. With only 327 training samples and without any additional tricks, journey learning outperformed conventional supervised learning by over 8\% on the MATH dataset, demonstrating its extremely powerful potential. We believe this to be the most crucial component of O1 technology that we have successfully decoded. We share valuable resources including technical hypotheses and insights, cognitive exploration maps, custom-developed tools, etc at https://github.com/GAIR-NLP/O1-Journey.

Traditional applications of natural language processing (NLP) in healthcare have predominantly focused on patient-centered services, enhancing patient interactions and care delivery, such as through medical dialogue systems. However, the potential of NLP to benefit inexperienced doctors, particularly in areas such as communicative medical coaching, remains largely unexplored. We introduce ``ChatCoach,'' an integrated human-AI cooperative framework. Within this framework, both a patient agent and a coaching agent collaboratively support medical learners in practicing their medical communication skills during consultations. Unlike traditional dialogue systems, ChatCoach provides a simulated environment where a human doctor can engage in medical dialogue with a patient agent. Simultaneously, a coaching agent provides real-time feedback to the doctor. To construct the ChatCoach system, we developed a dataset and integrated Large Language Models such as ChatGPT and Llama2, aiming to assess their effectiveness in communicative medical coaching tasks. Our comparative analysis demonstrates that instruction-tuned Llama2 significantly outperforms ChatGPT's prompting-based approaches.

The rapid growth of online video platforms, particularly live streaming services, has created an urgent need for real-time video understanding systems. These systems must process continuous video streams and respond to user queries instantaneously, presenting unique challenges for current Video Large Language Models (VideoLLMs). While existing VideoLLMs excel at processing complete videos, they face significant limitations in streaming scenarios due to their inability to handle dense, redundant frames efficiently. We introduce TimeChat-Online, a novel online VideoLLM that revolutionizes real-time video interaction. At its core lies our innovative Differential Token Drop (DTD) module, which addresses the fundamental challenge of visual redundancy in streaming videos. Drawing inspiration from human visual perception's Change Blindness phenomenon, DTD preserves meaningful temporal changes while filtering out static, redundant content between frames. Remarkably, our experiments demonstrate that DTD achieves an 82.8% reduction in video tokens while maintaining 98% performance on StreamingBench, revealing that over 80% of visual content in streaming videos is naturally redundant without requiring language guidance. To enable seamless real-time interaction, we present TimeChat-Online-139K, a comprehensive streaming video dataset featuring diverse interaction patterns including backward-tracing, current-perception, and future-responding scenarios. TimeChat-Online's unique Proactive Response capability, naturally achieved through continuous monitoring of video scene transitions via DTD, sets it apart from conventional approaches. Our extensive evaluation demonstrates TimeChat-Online's superior performance on streaming benchmarks (StreamingBench and OvOBench) and maintaining competitive results on long-form video tasks such as Video-MME and MLVU.

Speech-based large language models are typically constrained to spoken replies, which limits their user-facing outputs to what can be verbalized and suppresses text-native capabilities such as code generation, structured analysis, and multi-step reasoning in realtime interaction, for tasks that require persistent, structured, and inspectable intermediate outputs. Existing work improves spoken reasoning or full-duplex turn-taking, but still treats text as a hidden intermediate state or a subordinate modality rather than a first-class output channel. We propose Listen-Write-Speak (LWS), a text-first tri-channel paradigm in which a single autoregressive LLM continuously listens to user audio, writes visible free-form text as its primary output, and speaks a realtime oral response in parallel under a shared causal attention context. This behavior is implemented entirely through a Token Schema, requiring no architectural modifications, and learned via a two-stage data pipeline that synthesizes per-second cognitive annotations consistent with the revealed input timeline. Empirically, LWS demonstrates strong full-duplex interaction on Full-Duplex-Bench, reaches 4.72 on VoiceBench AlpacaEval, achieves 92.6% writing-speaking consistency, and consistently outperforms its internal ablations on URO-Bench. These results suggest that visible writing can serve as a first-class output channel for speech interaction without sacrificing realtime responsiveness. The code and dataset are available on the project page: https://royalzhang.com/project/lws-page/.

The GPT-4o represents a significant milestone in enabling real-time interaction with large language models (LLMs) through speech, its remarkable low latency and high fluency not only capture attention but also stimulate research interest in the field. This real-time speech interaction is particularly valuable in scenarios requiring rapid feedback and immediate responses, dramatically enhancing user experience. However, there is a notable lack of research focused on real-time large speech language models, particularly for Chinese. In this work, we present KE-Omni, a seamless large speech language model built upon Ke-SpeechChat, a large-scale high-quality synthetic speech interaction dataset consisting of 7 million Chinese and English conversations, featuring 42,002 speakers, and totaling over 60,000 hours, This contributes significantly to the advancement of research and development in this field. The demos can be accessed at https://huggingface.co/spaces/KE-Team/KE-Omni.

Real-time speech conversation is essential for natural and efficient human-machine interactions, requiring duplex and streaming capabilities. Traditional Transformer-based conversational chatbots operate in a turn-based manner and exhibit quadratic computational complexity that grows as the input size increases. In this paper, we propose DuplexMamba, a Mamba-based end-to-end multimodal duplex model for speech-to-text conversation. DuplexMamba enables simultaneous input processing and output generation, dynamically adjusting to support real-time streaming. Specifically, we develop a Mamba-based speech encoder and adapt it with a Mamba-based language model. Furthermore, we introduce a novel duplex decoding strategy that enables DuplexMamba to process input and generate output simultaneously. Experimental results demonstrate that DuplexMamba successfully implements duplex and streaming capabilities while achieving performance comparable to several recently developed Transformer-based models in automatic speech recognition (ASR) tasks and voice assistant benchmark evaluations. Our code and model are released

Active Real-time interaction with video LLMs introduces a new paradigm for human-computer interaction, where the model not only understands user intent but also responds while continuously processing streaming video on the fly. Unlike offline video LLMs, which analyze the entire video before answering questions, active real-time interaction requires three capabilities: 1) Perception: real-time video monitoring and interaction capturing. 2) Decision: raising proactive interaction in proper situations, 3) Reaction: continuous interaction with users. However, inherent conflicts exist among the desired capabilities. The Decision and Reaction require a contrary Perception scale and grain, and the autoregressive decoding blocks the real-time Perception and Decision during the Reaction. To unify the conflicted capabilities within a harmonious system, we present Dispider, a system that disentangles Perception, Decision, and Reaction. Dispider features a lightweight proactive streaming video processing module that tracks the video stream and identifies optimal moments for interaction. Once the interaction is triggered, an asynchronous interaction module provides detailed responses, while the processing module continues to monitor the video in the meantime. Our disentangled and asynchronous design ensures timely, contextually accurate, and computationally efficient responses, making Dispider ideal for active real-time interaction for long-duration video streams. Experiments show that Dispider not only maintains strong performance in conventional video QA tasks, but also significantly surpasses previous online models in streaming scenario responses, thereby validating the effectiveness of our architecture. The code and model are released at https://github.com/Mark12Ding/Dispider.

Full-duplex dialog models are designed to listen and speak simultaneously with rapid responses to fast-changing user input. Among existing approaches, native full-duplex models merges different channels (e.g. listen and speak) in a single time step, overcoming the high response latency inherent to time-division multiplexing time-division multiplexing (TDM) alternatives. Yet, a key challenge remains: aligning textual monologues with audio streams that operate at different bitrates. The prevailing solution relies on word-level alignment, but this can degrade the language ability of large pre-trained models. Moreover, it requires highly accurate timestamps for every token, which introduces cascading errors and increases pre-processing costs. In this paper, we propose textual monologues in continuous tokens sequence, namely "natural" monologues, which mimics humanoid cognitive behavior in dialogs. For temporal alignment, we alternate the position of the natural monologue - leading or trailing the audio - across different training stages. This "dual" training paradigm proves highly effective in building FLM-Audio, our 7B spoken dialog model that demonstrates superior responsiveness, duplexity, and chatting experiences, as confirmed by experimental results.

Recent progress in multimodal large language models (MLLMs) has brought AI capabilities from static offline data processing to real-time streaming interaction, yet they still remain far from human-level multimodal interaction. The key bottlenecks are no longer modality coverage or latency alone, but the interaction paradigm itself. First, perception and response are still separated into alternating phases, preventing models from incorporating new inputs for timely adjustment during generation. Second, most current models remain reactive, responding only to explicit user requests instead of acting proactively in the evolving multimodal environment. We present MiniCPM-o 4.5, our latest effort towards human-like multimodal interaction, which mitigates these gaps by real-time full-duplex omni-modal interaction. It can see, listen, and speak simultaneously in real-time, while also exhibiting proactive behaviors such as issuing reminders or comments based on its continuous understanding of the live scene. The key technique behind MiniCPM-o 4.5 is Omni-Flow, a unified streaming framework that aligns omni-modal inputs and outputs along a shared temporal axis. This formulation converts conventional turn-based interaction into a full-duplex, time-aligned process, enabling simultaneous perception and response and allowing proactive behavior to arise within the same framework. With a total of 9B parameters, MiniCPM-o 4.5 approaches Gemini 2.5 Flash in vision-language capabilities, delivering state-of-the-art open-source performance at its scale. It also surpasses Qwen3-Omni-30B-A3B in omni-modal understanding and delivers better speech generation, with significantly higher computation efficiency. Driven by its efficient architecture design and inference optimization, the model can perform real-time full-duplex omni-modal interaction on edge devices with less than 12GB RAM cost.

As large language models (LLMs) increasingly permeate daily lives, there is a growing demand for real-time interactions that mirror human conversations. Traditional turn-based chat systems driven by LLMs prevent users from verbally interacting with the system while it is generating responses. To overcome these limitations, we adapt existing LLMs to duplex models so that these LLMs can listen for users while generating output and dynamically adjust themselves to provide users with instant feedback. % such as in response to interruptions. Specifically, we divide the queries and responses of conversations into several time slices and then adopt a time-division-multiplexing (TDM) encoding-decoding strategy to pseudo-simultaneously process these slices. Furthermore, to make LLMs proficient enough to handle real-time conversations, we build a fine-tuning dataset consisting of alternating time slices of queries and responses as well as covering typical feedback types in instantaneous interactions. Our experiments show that although the queries and responses of conversations are segmented into incomplete slices for processing, LLMs can preserve their original performance on standard benchmarks with a few fine-tuning steps on our dataset. Automatic and human evaluation indicate that duplex models make user-AI interactions more natural and human-like, and greatly improve user satisfaction compared to vanilla LLMs. Our duplex model and dataset will be released.

Real-time duplex interaction is essential for multimodal AI systems operating in real-world scenarios, where models must continuously process streaming inputs and respond at appropriate moments. However, most existing multimodal large language models (MLLMs) are evaluated in offline settings, where the entire video input is processed before any response is generated. While recent work has started to explore real-time duplex MLLMs, there is still no comprehensive benchmark or automatic evaluation method for this setting. To address this gap, we propose Omni-DuplexEval, a benchmark for systematically evaluating real-time duplex interaction. The benchmark consists of two complementary scenarios: (1) Real-Time Description, which evaluates the ability to generate continuous, time-aligned responses that track evolving multimodal inputs, and (2) Proactive Reminder, which evaluates the ability to identify salient events and respond at appropriate moments. Omni-DuplexEval contains 660 videos with fine-grained, human-annotated labels and precise temporal metadata, spanning 9 tasks grounded in real-world scenarios, where all questions are formulated as open-ended queries. We further introduce an automatic evaluation framework based on LLM-as-a-Judge, which enables systematic assessment by jointly evaluating response-content alignment and response timing through timestamp-aware and sequential reasoning, achieving strong alignment with human judgments. Experiments on state-of-the-art duplex MLLMs reveal substantial limitations. The best-performing model achieves only 39.6% overall, while scoring only 20.0% on Proactive Reminder. Our analysis identifies two key challenges: models struggle to balance timely responses with coherent, holistic content generation, and they often fail to determine both when to respond and what to produce. We hope our work facilitates further progress in MLLMs.

Human interaction is continuous, multimodal, and full-duplex by nature. Although recent omni models have made substantial progress in unified speech, vision, and text modeling, combining seamless real-time interaction with complex reasoning and tool use remains challenging. We present DuplexOmni, a method for real-time multimodal full-duplex interaction. DuplexOmni separates model capability into an interaction layer and a thinking layer, which collaborate asynchronously in parallel. The interaction layer is implemented by the DuplexOmni model, an end-to-end system that processes streaming audio and video inputs while generating text and speech responses in real time. The thinking layer is a pluggable module that provides complex reasoning and tool-use capabilities. To support this method, we further develop a Writer-Director pipeline for constructing continuous-interaction training data. Experiments show that DuplexOmni achieves strong performance on multiple public benchmarks and exhibits natural full-duplex interaction ability.

Recent advances in language models have achieved significant progress. GPT-4o, as a new milestone, has enabled real-time conversations with humans, demonstrating near-human natural fluency. Such human-computer interaction necessitates models with the capability to perform reasoning directly with the audio modality and generate output in streaming. However, this remains beyond the reach of current academic models, as they typically depend on extra TTS systems for speech synthesis, resulting in undesirable latency. This paper introduces the Mini-Omni, an audio-based end-to-end conversational model, capable of real-time speech interaction. To achieve this capability, we propose a text-instructed speech generation method, along with batch-parallel strategies during inference to further boost the performance. Our method also helps to retain the original model's language capabilities with minimal degradation, enabling other works to establish real-time interaction capabilities. We call this training method "Any Model Can Talk". We also introduce the VoiceAssistant-400K dataset to fine-tune models optimized for speech output. To our best knowledge, Mini-Omni is the first fully end-to-end, open-source model for real-time speech interaction, offering valuable potential for future research.

Real-time Automatic Speech Recognition (ASR) is a fundamental building block for many commercial applications of ML, including live captioning, dictation, meeting transcriptions, and medical scribes. Accuracy and latency are the most important factors when companies select a system to deploy. We present WhisperKit, an optimized on-device inference system for real-time ASR that significantly outperforms leading cloud-based systems. We benchmark against server-side systems that deploy a diverse set of models, including a frontier model (OpenAI gpt-4o-transcribe), a proprietary model (Deepgram nova-3), and an open-source model (Fireworks large-v3-turbo).Our results show that WhisperKit matches the lowest latency at 0.46s while achieving the highest accuracy 2.2% WER. The optimizations behind the WhisperKit system are described in detail in this paper.

Dialogue serves as the most natural manner of human-computer interaction (HCI). Recent advancements in speech language models (SLM) have significantly enhanced speech-based conversational AI. However, these models are limited to turn-based conversation, lacking the ability to interact with humans in real-time spoken scenarios, for example, being interrupted when the generated content is not satisfactory. To address these limitations, we explore full duplex modeling (FDM) in interactive speech language models (iSLM), focusing on enhancing real-time interaction and, more explicitly, exploring the quintessential ability of interruption. We introduce a novel model design, namely listening-while-speaking language model (LSLM), an end-to-end system equipped with both listening and speaking channels. Our LSLM employs a token-based decoder-only TTS for speech generation and a streaming self-supervised learning (SSL) encoder for real-time audio input. LSLM fuses both channels for autoregressive generation and detects turn-taking in real time. Three fusion strategies -- early fusion, middle fusion, and late fusion -- are explored, with middle fusion achieving an optimal balance between speech generation and real-time interaction. Two experimental settings, command-based FDM and voice-based FDM, demonstrate LSLM's robustness to noise and sensitivity to diverse instructions. Our results highlight LSLM's capability to achieve duplex communication with minimal impact on existing systems. This study aims to advance the development of interactive speech dialogue systems, enhancing their applicability in real-world contexts.

Speech conveys information through both words and vocal delivery. We evaluate four leading production realtime voice systems-OpenAI's GPT Realtime 2, Google's Gemini 3.1 Flash Live, and Alibaba's Qwen3.5 Omni Plus and Omni Flash-on tasks where the words and the delivery patterns both convey meaningful information. Across three consequential scenarios, all four systems act on the words rather than the voice. They end calls with crying callers who insist nothing is wrong, approve wire transfers authorized in frightened voices, and enroll callers whose agreement is clearly sarcastic. Surprisingly, this is often not a failure of perception. When asked directly, three of the four systems reliably identify the distress, fear, or sarcasm they later ignore when making decisions. We observe a similar pattern when these realtime voice systems estimate accent and age, as their responses frequently follow the biases of the words rather than the acoustic properties of the speaker. We term this disconnect between perception and action the emotional intelligence gap of voice AI. Prompting systems to explicitly attend to vocal delivery improves performance only partially and inconsistently. Our findings show that current realtime voice AI systems often behave as if speech had been reduced to a transcript, suggesting that they should be used with caution in settings where the tone and emotion of delivery convey important information.

Full-Duplex Speech-to-Speech Large Language Models (LLMs) are foundational to natural human-computer interaction, enabling real-time spoken dialogue systems. However, benchmarking and modeling these models remains a fundamental challenge. We introduce FLEXI, the first benchmark for full-duplex LLM-human spoken interaction that explicitly incorporates model interruption in emergency scenarios. FLEXI systematically evaluates the latency, quality, and conversational effectiveness of real-time dialogue through six diverse human-LLM interaction scenarios, revealing significant gaps between open source and commercial models in emergency awareness, turn terminating, and interaction latency. Finally, we suggest that next token-pair prediction offers a promising path toward achieving truly seamless and human-like full-duplex interaction.

Real-time speech-to-speech (S2S) models excel at generating natural, low-latency conversational responses but often lack deep knowledge and semantic understanding. Conversely, cascaded systems combining automatic speech recognition, a text-based Large Language Model (LLM), and text-to-speech synthesis offer superior knowledge representation at the cost of high latency, which disrupts the flow of natural interaction. This paper introduces a novel hybrid architecture that bridges the gap between these two paradigms. Our framework processes user speech through an S2S transformer for immediate responsiveness while concurrently relaying the query to a powerful back-end LLM. The LLM's text-based response is then injected in real time to guide the S2S model's speech generation, effectively infusing its output with rich knowledge without the full latency penalty of a cascaded system. We evaluated our method using a speech-synthesized variant of the MT-Bench benchmark that consists of multi-turn question-answering sessions. The results demonstrate that our system substantially outperforms a baseline S2S model in response correctness, approaching that of a cascaded system, while maintaining a latency on par with the baseline.

Simultaneous speech translation (SimulST) is a demanding task that involves generating translations in real-time while continuously processing speech input. This paper offers a comprehensive overview of the recent developments in SimulST research, focusing on four major challenges. Firstly, the complexities associated with processing lengthy and continuous speech streams pose significant hurdles. Secondly, satisfying real-time requirements presents inherent difficulties due to the need for immediate translation output. Thirdly, striking a balance between translation quality and latency constraints remains a critical challenge. Finally, the scarcity of annotated data adds another layer of complexity to the task. Through our exploration of these challenges and the proposed solutions, we aim to provide valuable insights into the current landscape of SimulST research and suggest promising directions for future exploration.

Multi-agent systems built on large language models (LLMs) have become a prevailing paradigm for tackling complex reasoning, planning, and tool-use tasks. The dominant communication protocol in such systems is natural language: agents exchange messages token-by-token, verbalising their internal reasoning so that peers can read, verify, and respond. While convenient and interpretable, this protocol suffers from three structural drawbacks -- high inference cost, irreversible information loss during discretization, and ambiguity/redundancy of natural language. A growing body of work therefore explores an alternative protocol -- latent communication -- in which agents exchange continuous representations (embeddings, hidden states, or KV-caches) directly, bypassing the bottleneck of text generation. This paper presents a unified framework for organising the rapidly expanding literature on latent communication. We analyse existing methods along three orthogonal axes: (1) WHAT information is communicated (Embeddings, Hidden States, KV-Caches, or other continuous state); (2) WHICH sender-receiver alignment is used (latent-space alignment and layer alignment); and (3) HOW the communicated information is fused into the receiver (concatenation, prepending, mathematical operations, cross-attention, or cache restoration). Under this 3-axis framework, we systematically categorise eighteen representative methods proposed between 2024 and 2026, identify five major design patterns, and surface a set of open challenges -- including cross-architecture alignment, security of latent channels, compression for edge deployment, and the relationship between latent communication and latent chain-of-thought. We hope that this framework both lowers the barrier to entry for new researchers and provides a vocabulary for comparing future work.

Recently, researchers have shown that the beamforming feedback angles (BFAs) used for Wi-Fi multiple-input multiple-output (MIMO) operations can be effectively leveraged as a proxy of the channel frequency response (CFR) for different purposes. Examples are passive human activity recognition and device fingerprinting. However, even though the BFAs report frames are sent in clear text, there is not yet a unified open-source tool to extract and decode the BFAs from the frames. To fill this gap, we developed Wi-BFI, the first tool that allows retrieving Wi-Fi BFAs and reconstructing the beamforming feedback information (BFI) - a compressed representation of the CFR - from the BFAs frames captured over the air. The tool supports BFAs extraction within both IEEE 802.11ac and 802.11ax networks operating on radio channels with 160/80/40/20 MHz bandwidth. Both multi-user and single-user MIMO feedback can be decoded through Wi-BFI. The tool supports real-time and offline extraction and storage of BFAs and BFI. The real-time mode also includes a visual representation of the channel state that continuously updates based on the collected data. Wi-BFI code is open source and the tool is also available as a pip package.

In this paper, we present Duplex Conversation, a multi-turn, multimodal spoken dialogue system that enables telephone-based agents to interact with customers like a human. We use the concept of full-duplex in telecommunication to demonstrate what a human-like interactive experience should be and how to achieve smooth turn-taking through three subtasks: user state detection, backchannel selection, and barge-in detection. Besides, we propose semi-supervised learning with multimodal data augmentation to leverage unlabeled data to increase model generalization. Experimental results on three sub-tasks show that the proposed method achieves consistent improvements compared with baselines. We deploy the Duplex Conversation to Alibaba intelligent customer service and share lessons learned in production. Online A/B experiments show that the proposed system can significantly reduce response latency by 50%.

We introduce Voxtral Realtime, a natively streaming automatic speech recognition model that matches offline transcription quality at sub-second latency. Unlike approaches that adapt offline models through chunking or sliding windows, Voxtral Realtime is trained end-to-end for streaming, with explicit alignment between audio and text streams. Our architecture builds on the Delayed Streams Modeling framework, introducing a new causal audio encoder and Ada RMS-Norm for improved delay conditioning. We scale pretraining to a large-scale dataset spanning 13 languages. At a delay of 480ms, Voxtral Realtime achieves performance on par with Whisper, the most widely deployed offline transcription system. We release the model weights under the Apache 2.0 license.

We present Wan-Streamer v0.3, which reframes our native-streaming interaction model under a single organizing view: a video is a world plus an event stream. The world is the persistent context in which a video unfolds, including the environment, scene, subjects, ambient acoustic conditions, voice characteristics, and other relatively stable conditions. The event stream is everything that changes over time within that world, including scene or environmental changes, subject behavior, speech, and other sounds. This yields a general-purpose pretraining task over large amounts of real video: given a world and incoming input, predict how the world moves, changes, and responds in real time. The resulting competence can be specialized to a broad family of real-time downstream tasks. We instantiate it on real-time full-duplex audio-visual interaction, where the event stream is the agent's speech together with free-form behavior. Functionally, the model's multimodal understanding process is vision-language-action-like: it maps multimodal user input to language-form speech and behavior actions. Wan-Streamer v0.3 preserves the v0.2 operating point: 640x368 video at 25 FPS, a 160 ms streaming unit, approximately 200 ms model-side response latency, and approximately 550 ms total interaction latency under a 350 ms bidirectional network budget.

Despite broad interest in modeling spoken dialogue agents, most approaches are inherently "half-duplex" -- restricted to turn-based interaction with responses requiring explicit prompting by the user or implicit tracking of interruption or silence events. Human dialogue, by contrast, is "full-duplex" allowing for rich synchronicity in the form of quick and dynamic turn-taking, overlapping speech, and backchanneling. Technically, the challenge of achieving full-duplex dialogue with LLMs lies in modeling synchrony as pre-trained LLMs do not have a sense of "time". To bridge this gap, we propose Synchronous LLMs for full-duplex spoken dialogue modeling. We design a novel mechanism to integrate time information into Llama3-8b so that they run synchronously with the real-world clock. We also introduce a training recipe that uses 212k hours of synthetic spoken dialogue data generated from text dialogue data to create a model that generates meaningful and natural spoken dialogue, with just 2k hours of real-world spoken dialogue data. Synchronous LLMs outperform state-of-the-art in dialogue meaningfulness while maintaining naturalness. Finally, we demonstrate the model's ability to participate in full-duplex dialogue by simulating interaction between two agents trained on different datasets, while considering Internet-scale latencies of up to 240 ms. Webpage: https://syncllm.cs.washington.edu/.

Deliberating takes time. In real-time settings, that time is not free. Standard reinforcement learning (RL) sidesteps this as the environment waits indefinitely for the agent's decision. Instead, we study real-time RL environments where the environment progresses while waiting for the agent's action. Building on prior real-time formalizations, we introduce variable-delay real-time RL, where the agent chooses how long to deliberate at each decision point since the environment progresses. For the planning agents we use, the right delay is state-dependent, and naively planning how long to plan can paralyze the agent. We instead approach this setting by training a lightweight gating policy on top of a planner to select state-dependent planning budgets. Across real-time Pac-Man, Tetris, Snake, Speed Hex, and Speed Go, our gating policy outperforms fixed-budget and heuristic baselines, and transfers to a real-time setup where the environment and agent run on two different GPUs.

Modern AI systems, especially those interacting with the physical world, increasingly require real-time performance. However, the high latency of state-of-the-art generalist models, including recent vision-language action models (VLAs), poses a significant challenge. While action chunking has enabled temporal consistency in high-frequency control tasks, it does not fully address the latency problem, leading to pauses or out-of-distribution jerky movements at chunk boundaries. This paper presents a novel inference-time algorithm that enables smooth asynchronous execution of action chunking policies. Our method, real-time chunking (RTC), is applicable to any diffusion- or flow-based VLA out of the box with no re-training. It generates the next action chunk while executing the current one, "freezing" actions guaranteed to execute and "inpainting" the rest. To test RTC, we introduce a new benchmark of 12 highly dynamic tasks in the Kinetix simulator, as well as evaluate 6 challenging real-world bimanual manipulation tasks. Results demonstrate that RTC is fast, performant, and uniquely robust to inference delay, significantly improving task throughput and enabling high success rates in precise tasks x2013 such as lighting a match x2013 even in the presence of significant latency. See https://pi.website/research/real_time_chunking for videos.

Deep learning (DL) based semantic communication methods have been explored for the efficient transmission of images, text, and speech in recent years. In contrast to traditional wireless communication methods that focus on the transmission of abstract symbols, semantic communication approaches attempt to achieve better transmission efficiency by only sending the semantic-related information of the source data. In this paper, we consider semantic-oriented speech to text transmission. We propose a novel end-to-end DL-based transceiver, which includes an attention-based soft alignment module and a redundancy removal module to compress the transmitted data. In particular, the former extracts only the text-related semantic features, and the latter further drops the semantically redundant content, greatly reducing the amount of semantic redundancy compared to existing methods. We also propose a two-stage training scheme, which speeds up the training of the proposed DL model. The simulation results indicate that our proposed method outperforms current methods in terms of the accuracy of the received text and transmission efficiency. Moreover, the proposed method also has a smaller model size and shorter end-to-end runtime.

We propose an open-source framework for Command-style dictation that addresses the gap between resource-intensive Online systems and high-latency Batch processing. Our approach uses Voice Activity Detection (VAD) to segment audio and transcribes these segments in parallel using Whisper models, enabling efficient multiplexing across audios. Unlike proprietary systems like SuperWhisper, this framework is also compatible with most ASR architectures, including widely used CTC-based models. Our multiplexing technique maximizes compute utilization in real-world settings, as demonstrated by its deployment in around 15% of India's courtrooms. Evaluations on live data show consistent latency reduction as user concurrency increases, compared to sequential batch processing. The live demonstration will showcase our open-sourced implementation and allow attendees to interact with it in real-time.

Real-time speech synthesis requires balancing inference latency and acoustic fidelity for interactive applications. Conventional continuous text-to-speech pipelines require computationally intensive neural vocoders to reconstruct phase information, creating a significant streaming bottleneck. Furthermore, regression-based acoustic modeling frequently induces spectral over-smoothing artifacts. To address these limitations, this paper proposes a novel end-to-end non-autoregressive architecture optimized for ultra-low latency block-wise generation, directly modeling the highly compressed discrete latent space of the Mimi neural audio codec. Integrating a modified FastSpeech 2 backbone with a progressive depth-wise sequential decoding strategy, the architecture dynamically conditions 32 layers of residual vector quantization codes. This mechanism resolves phonetic alignment degradation and manages the complexity of high-fidelity discrete representations without temporal autoregressive overhead. Experimental evaluations on English and Malay datasets validate its language-independent deployment capability. Compared to conventional continuous regression models, the proposed architecture demonstrates quantitative improvements in fundamental voicing accuracy and mitigates high-frequency spectral degradation. It achieves ultra-low latency inference, translating to a 10.6-fold absolute acceleration over conventional cascaded pipelines. Crucially, the system achieves an average time-to-first-byte latency of 48.99 milliseconds, falling significantly below the human perception threshold for real-time interactive streaming. These results firmly establish the proposed architecture as a highly optimized solution for deploying real-time streaming speech interfaces.

Knowing how to end and resume conversations over time is a natural part of communication, allowing for discussions to span weeks, months, or years. The duration of gaps between conversations dictates which topics are relevant and which questions to ask, and dialogue systems which do not explicitly model time may generate responses that are unnatural. In this work we explore the idea of making dialogue models aware of time, and present GapChat, a multi-session dialogue dataset in which the time between each session varies. While the dataset is constructed in real-time, progress on events in speakers' lives is simulated in order to create realistic dialogues occurring across a long timespan. We expose time information to the model and compare different representations of time and event progress. In human evaluation we show that time-aware models perform better in metrics that judge the relevance of the chosen topics and the information gained from the conversation.

Full-stream text-to-speech (TTS) for interactive systems must start speaking with minimal delay while remaining controllable as text arrives incrementally. We present VoXtream2, a zero-shot full-stream TTS model with dynamic speaking-rate control that can be updated mid-utterance on the fly. VoXtream2 combines a distribution matching mechanism over duration states with classifier-free guidance across conditioning signals to improve controllability and synthesis quality. Prompt-text masking enables textless audio prompting, removing the need for prompt transcription. Across standard zero-shot benchmarks and a dedicated speaking-rate test set, VoXtream2 achieves competitive objective and subjective results against public baselines despite a smaller model and less training data. In full-stream mode, it runs 4 times faster than real time with 74 ms first-packet latency on a consumer GPU.

Real-time spoken dialogue systems face a fundamental tension between latency and response quality. End-to-end speech-to-speech (S2S) models respond immediately and naturally handle turn-taking, backchanneling, and interruption, but produce semantically weaker outputs. Cascaded pipelines (ASR -> LLM) deliver stronger responses at the cost of latency that grows with model size. We present RelayS2S, a hybrid architecture that runs two paths in parallel upon turn detection. The fast path -- a duplex S2S model -- speculatively drafts a short response prefix that is streamed immediately to TTS for low-latency audio onset, while continuing to monitor live audio events. The slow path -- a cascaded ASR -> LLM pipeline -- generates a higher-quality continuation conditioned on the committed prefix, producing a seamless utterance. A lightweight learned verifier gates the handoff, committing the prefix when appropriate or falling back gracefully to the slow path alone. Experiments show that RelayS2S achieves P90 onset latency comparable to the S2S model while retaining 99% cascaded response quality in average score, with benefits growing as the slow-path model scales. Because the prefix handoff requires no architectural modification to either component, RelayS2S serves as a lightweight, drop-in addition to existing cascaded pipelines. Our code and data are publicly available at: https://github.com/mailong25/relays2s

LLM-based function calling enables intelligent agents to interact with external tools and environments, yet autoregressive decoding imposes a fundamental latency bottleneck that limits real-time applications such as embodied intelligence, game AI, and interactive avatars (e.g., 10 Hz control frequency). We observe that function calling differs fundamentally from free-form text generation: structured outputs exhibit substantial token redundancy (delimiters, parameter names), and arguments exhibit weak causal dependencies. Crucially, these two properties must be exploited jointly to achieve real-time performance. We present SimpleTool, which introduces special tokens that serve a dual role: compressing low-entropy tokens (4-6x reduction) while acting as mode selectors that enable independent parallel generation of function name and arguments. This synergistic design achieves 3-6x end-to-end speedup (up to 9.6x) with only +8.2% parallelization overhead. Experiments on five benchmarks across Qwen-series models (0.5B-14B) demonstrate substantial speedup while maintaining competitive or improved accuracy. On Mobile Actions, ST-Qwen-0.5B outperforms Google's FunctionGemma in both accuracy and latency consistency. With quantization on consumer-grade GPU, SimpleTool achieves 61.2ms P50 latency, enabling 16 Hz real-time control at 4B model scale, bridging the gap between LLM function calling and latency-critical real-world deployment.

Camera-controlled video-to-video (V2V) generation enables dynamic viewpoint synthesis from monocular footage, holding immense potential for interactive filmmaking and live broadcasting. However, existing implicit synthesis methods fundamentally rely on non-causal, full-sequence processing and rigid prefix-style temporal concatenation. This architectural paradigm mandates bidirectional attention, resulting in prohibitive computational latency, quadratic complexity scaling, and inherent incompatibility with real-time streaming or variable-length inputs. To overcome these limitations, we introduce RealCam, a novel autoregressive framework for interactive, real-time camera-controlled V2V generation. We first design a high-fidelity teacher model grounded in a Cross-frame In-context Learning paradigm. By interleaving source and target frames into synchronized contextual pairs, our design inherently enables length-agnostic generalization and naturally facilitates causal adaptation, breaking the rigid prefix bottleneck. We then distill this teacher into a few-step causal student via Self-Forcing with Distribution Matching Distillation, enabling efficient, on-the-fly streaming synthesis. Furthermore, to mitigate severe loop inconsistency in closed-loop trajectories, we propose Loop-Closed Data Augmentation (LoopAug), a novel paradigm that synthesizes globally consistent loop sequences from existing multiview datasets. Extensive experiments demonstrate that RealCam achieves state-of-the-art visual fidelity and temporal consistency while enabling truly interactive camera control with orders-of-magnitude faster inference than existing paradigms. Our project page is at https://xyc-fly.github.io/RealCam/.

Recent work in speech-to-speech translation (S2ST) has focused primarily on offline settings, where the full input utterance is available before any output is given. This, however, is not reasonable in many real-world scenarios. In latency-sensitive applications, rather than waiting for the full utterance, translations should be spoken as soon as the information in the input is present. In this work, we introduce a system for simultaneous S2ST targeting real-world use cases. Our system supports translation from 57 languages to English with tunable parameters for dynamically adjusting the latency of the output -- including four policies for determining when to speak an output sequence. We show that these policies achieve offline-level accuracy with minimal increases in latency over a Greedy (wait-k) baseline. We open-source our evaluation code and interactive test script to aid future SimulS2ST research and application development.

We consider a semantic communication system for speech signals, named DeepSC-S. Motivated by the breakthroughs in deep learning (DL), we make an effort to recover the transmitted speech signals in the semantic communication systems, which minimizes the error at the semantic level rather than the bit level or symbol level as in the traditional communication systems. Particularly, based on an attention mechanism employing squeeze-and-excitation (SE) networks, we design the transceiver as an end-to-end (E2E) system, which learns and extracts the essential speech information. Furthermore, in order to facilitate the proposed DeepSC-S to work well on dynamic practical communication scenarios, we find a model yielding good performance when coping with various channel environments without retraining process. The simulation results demonstrate that our proposed DeepSC-S is more robust to channel variations and outperforms the traditional communication systems, especially in the low signal-to-noise (SNR) regime.

Real-time video commentary generation provides textual descriptions of ongoing events in videos. It supports accessibility and engagement in domains such as sports, esports, and livestreaming. Commentary generation involves two essential decisions: what to say and when to say it. While recent prompting-based approaches using multimodal large language models (MLLMs) have shown strong performance in content generation, they largely ignore the timing aspect. We investigate whether in-context prompting alone can support real-time commentary generation that is both semantically relevant and well-timed. We propose two prompting-based decoding strategies: 1) a fixed-interval approach, and 2) a novel dynamic interval-based decoding approach that adjusts the next prediction timing based on the estimated duration of the previous utterance. Both methods enable pause-aware generation without any fine-tuning. Experiments on Japanese and English datasets of racing and fighting games show that the dynamic interval-based decoding can generate commentary more closely aligned with human utterance timing and content using prompting alone. We release a multilingual benchmark dataset, trained models, and implementations to support future research on real-time video commentary generation.

In remote control systems, transmitting large data volumes (e.g. video feeds) from wireless sensors to faraway controllers is challenging when the uplink channel capacity is limited (e.g. RedCap devices or massive wireless sensor networks). Furthermore, the controllers often only need the information-rich components of the original data. To address this, we propose a Time-Series Joint Embedding Predictive Architecture (TS-JEPA) and a semantic actor trained through self-supervised learning. This approach harnesses TS-JEPA's semantic representation power and predictive capabilities by capturing spatio-temporal correlations in the source data. We leverage this to optimize uplink channel utilization, while the semantic actor calculates control commands directly from the encoded representations, rather than from the original data. We test our model through multiple parallel instances of the well-known inverted cart-pole scenario, where the approach is validated through the maximization of stability under constrained uplink channel capacity.

Real-time interaction models -- Moshi, MiniCPM-o, Qwen-Omni -- turn serving into a periodic real-time task: on every frame a session ingests streaming audio and must respond by a recurring wall-clock deadline, while its KV cache grows monotonically and stays pinned for the whole conversation. This regime hides a dangerous failure mode. On a real full-duplex stack, sustained load does not degrade serving gracefully: it falls off a cliff, jumping in one step from milliseconds per frame to a stalled engine when accumulated session state exhausts the KV pool. The collapse is metastable -- identical five-minute runs collapse or survive on run-to-run variance -- and silent: latency and deadline-miss metrics read healthy throughout. We show one move restores both stability and observability: bound each session's resident state, and latency starts telling the truth. Metronome's in-engine KV window eliminates the collapse (0/20 vs. 14/20 runs across two batches) and turns per-frame latency into a monotone load signal, on which an online admission controller discovers the schedulable concurrency; without the window, the identical controller over-admits into the wall. A first-order model predicts the collapse time within a few percent on the headline model, and a quality probe validates the bound's design by ablation: the window alone is quality-free in turn-based decoding, and its few pinned attention-sink tokens are what keep free-running generation healthy. Everything is measured end-to-end on real audio, across four interaction models on one GPU.