Daily Papers

LLM unlearning is essential for removing sensitive or unwanted knowledge while preserving useful capabilities. As LLM teams are increasingly used to solve complex problems, forgetting must remain effective during collaboration. Despite advances in forgetting effectiveness, efficiency, and robustness to relearning, team deployment remains underexplored. We find that collaboration weakens forgetting: final-answer evaluations miss recoverable evidence in team messages, including complementary clues supporting joint recovery. We establish theoretically and confirm empirically that controlling final answers or individual messages does not ensure low recovery from their combination. To address this challenge, we propose Aggregation-Conditioned Unlearning (ACU). ACU trains a shared model using reconstruction feedback from individual and pooled messages, prioritizes views with higher recovery risk, and uses replacement-based credit assignment while protecting direct and collaborative utility. TOFU evaluates trajectory-level recovery, while WMDP-bio tests native forgetting and retained utility. On TOFU, ACU lowers full-trajectory recovery from 41.8% to 19.3% in ROUGE-L recall and factual recovery from 34.2% to 18.7% versus output-supervised training, with comparable retained-task performance. These results demonstrate that ACU curbs information leakage in LLM teams and generalizes across team sizes and readers.

We present Recurrent Fitting (ReFit), a neural network architecture for single-image, parametric 3D human reconstruction. ReFit learns a feedback-update loop that mirrors the strategy of solving an inverse problem through optimization. At each iterative step, it reprojects keypoints from the human model to feature maps to query feedback, and uses a recurrent-based updater to adjust the model to fit the image better. Because ReFit encodes strong knowledge of the inverse problem, it is faster to train than previous regression models. At the same time, ReFit improves state-of-the-art performance on standard benchmarks. Moreover, ReFit applies to other optimization settings, such as multi-view fitting and single-view shape fitting. Project website: https://yufu-wang.github.io/refit_humans/

In this work, we propose an efficient method for channel state information (CSI) adaptive quantization and feedback in frequency division duplexing (FDD) systems. Existing works mainly focus on the implementation of autoencoder (AE) neural networks (NNs) for CSI compression, and consider straightforward quantization methods, e.g., uniform quantization, which are generally not optimal. With this strategy, it is hard to achieve a low reconstruction error, especially, when the available number of bits reserved for the latent space quantization is small. To address this issue, we recommend two different methods: one based on a post training quantization and the second one in which the codebook is found during the training of the AE. Both strategies achieve better reconstruction accuracy compared to standard quantization techniques.

Reconstructing interactive, simulation-ready 3D scenes from a single image is a critical bottleneck for robotic manipulation. While recent single-image lifters recover plausible per-object shapes, composing them yields scenes that collapse under physical simulation due to interpenetrating, hovering, or sinking objects. Existing physics-aware methods address this strictly as a post-hoc layout correction, leaving the underlying geometric errors unresolved. To address this, we introduce SimuScene, a compositional 3D reconstruction pipeline that puts physics in the loop of shape and layout estimation. Rather than using physics merely for layout cleanup, we utilize the physics engine as a diagnostic measurement tool during the generative process itself. By diagnostically simulating reconstructed objects under gravity, we convert penetration and support failures into quantitative correction signals that drive gravity-axis stretching and amodal shape resampling. This physics-informed feedback loop mitigates accumulated reconstruction errors and produces a stable, simulation-ready compositional 3D scene. Extensive experiments demonstrate state-of-the-art performance on physical stability and geometric alignment benchmarks. We further highlight SimuScene's utility by deploying reconstructed environments in humanoid control and robot-arm manipulation tasks.

We propose RefineSVG, a single-step closed-loop visual feedback framework that enables multimodal large language models (MLLMs) to perform high-fidelity image-to-SVG generation through self-correction. Existing MLLM-based approaches rely on single-pass open-loop inference, where the model receives visual input only once and must generate thousands of SVG code tokens without intermediate verification. This paradigm inevitably leads to geometric drift, error accumulation, and visual hallucination on complex images. RefineSVG overcomes this limitation by invoking an external rendering engine after an initial SVG generation pass to compare the rendered output against the target image. The comparison yields a multi-dimensional visual residual map (Diff-Map) that is fed back to the model as a ReAct-style correction signal, driving a targeted correction step. To support this render-observe-correct interaction, we further introduce an SVG-oriented semantic vocabulary that compresses token sequences by over 52%. A progressive training pipeline spanning supervised fine-tuning, rejection-sampling cold-start data construction, and end-to-end agentic reinforcement learning aligns the model with closed-loop visual correction. Extensive experiments show that RefineSVG consistently outperforms existing baselines in reconstruction fidelity, structural accuracy, and code efficiency.Code is available at https://github.com/liuxiaobo66/RefineSVG.

Large scale 3D scene reconstruction is important for applications such as virtual reality and simulation. Existing neural rendering approaches (e.g., NeRF, 3DGS) have achieved realistic reconstructions on large scenes, but optimize per scene, which is expensive and slow, and exhibit noticeable artifacts under large view changes due to overfitting. Generalizable approaches or large reconstruction models are fast, but primarily work for small scenes/objects and often produce lower quality rendering results. In this work, we introduce G3R, a generalizable reconstruction approach that can efficiently predict high-quality 3D scene representations for large scenes. We propose to learn a reconstruction network that takes the gradient feedback signals from differentiable rendering to iteratively update a 3D scene representation, combining the benefits of high photorealism from per-scene optimization with data-driven priors from fast feed-forward prediction methods. Experiments on urban-driving and drone datasets show that G3R generalizes across diverse large scenes and accelerates the reconstruction process by at least 10x while achieving comparable or better realism compared to 3DGS, and also being more robust to large view changes.

Reconstructing an editable CAD model from a 3D shape remains a challenging engineering task. Existing methods can propose CAD operations, but no single source of proposals works equally well across different part geometries and stages of reconstruction. We introduce CADFather, an autonomous agentic system that coordinates complementary tools to recover parametric CAD programs from 3D meshes. A vision-language assistant inspects renders of the target and intermediate reconstructions, then decides which candidate CAD programs to extend, which tools to invoke, how many proposals to generate, and when to finish. Learned and algorithmic tools propose CAD operations, while numerical optimization refines the parameters of existing programs. Proposed or refined programs are executed and evaluated to provide feedback for subsequent decisions. The agent maintains alternative candidate programs for each target part and preserves the best valid result throughout reconstruction. CADFather uses pretrained generation and assistant models without additional training. We evaluate reconstruction quality and execution validity on the full DeepCAD, Fusion360, and MCB test sets, as well as on CADENA-Bench, CADBench, and BenchCAD. We additionally analyze computational cost and the trade-off between cost and reconstruction quality.

The advent of 3D Gaussian Splatting (3DGS) has advanced 3D scene reconstruction and novel view synthesis. With the growing interest of interactive applications that need immediate feedback, online 3DGS reconstruction in real-time is in high demand. However, none of existing methods yet meet the demand due to three main challenges: the absence of predetermined camera parameters, the need for generalizable 3DGS optimization, and the necessity of reducing redundancy. We propose StreamGS, an online generalizable 3DGS reconstruction method for unposed image streams, which progressively transform image streams to 3D Gaussian streams by predicting and aggregating per-frame Gaussians. Our method overcomes the limitation of the initial point reconstruction dust3r in tackling out-of-domain (OOD) issues by introducing a content adaptive refinement. The refinement enhances cross-frame consistency by establishing reliable pixel correspondences between adjacent frames. Such correspondences further aid in merging redundant Gaussians through cross-frame feature aggregation. The density of Gaussians is thereby reduced, empowering online reconstruction by significantly lowering computational and memory costs. Extensive experiments on diverse datasets have demonstrated that StreamGS achieves quality on par with optimization-based approaches but does so 150 times faster, and exhibits superior generalizability in handling OOD scenes.

Regression-based methods have recently shown promising results in reconstructing human meshes from monocular images. By directly mapping raw pixels to model parameters, these methods can produce parametric models in a feed-forward manner via neural networks. However, minor deviation in parameters may lead to noticeable misalignment between the estimated meshes and image evidences. To address this issue, we propose a Pyramidal Mesh Alignment Feedback (PyMAF) loop to leverage a feature pyramid and rectify the predicted parameters explicitly based on the mesh-image alignment status in our deep regressor. In PyMAF, given the currently predicted parameters, mesh-aligned evidences will be extracted from finer-resolution features accordingly and fed back for parameter rectification. To reduce noise and enhance the reliability of these evidences, an auxiliary pixel-wise supervision is imposed on the feature encoder, which provides mesh-image correspondence guidance for our network to preserve the most related information in spatial features. The efficacy of our approach is validated on several benchmarks, including Human3.6M, 3DPW, LSP, and COCO, where experimental results show that our approach consistently improves the mesh-image alignment of the reconstruction. The project page with code and video results can be found at https://hongwenzhang.github.io/pymaf.

Robotic grasping and surface exploration benefit from simultaneous measurement of normal and tangential forces and from surface information obtained through contact. Here, we present a compact magnetociliary tactile sensor (MagCilia) that combines a flexible magnetic-cilia structure with a Hall sensor for 3D force sensing. Quasi-static finite element analysis is used to investigate structural deformation and magnetic responses under multidirectional loading. To reconstruct forces from the coupled magnetic channels, we propose causal history fusion regression (CHFR), which combines current magnetic-field measurements with their recent changes. Five-fold cross-validation grouped by calibration record yields root-mean-square errors of 0.40, 0.57, and 0.69 N for Fx, Fy, and Fz, respectively, with corresponding coefficients of determination of 0.93, 0.90, and 0.92. Robotic experiments demonstrate tangential-force-guided gripper adjustment and multi-axis load monitoring under external perturbations. Frequency-domain features of the reconstructed forces distinguish six surface categories with 99.39% accuracy in three-fold cross-validation grouped by acquisition session. An online robotic demonstration additionally identifies all six tested surfaces. These results demonstrate 3D force reconstruction, grasping feedback, and surface recognition using a single compact tactile unit.

Computer-Aided Design (CAD) plays a central role in engineering and manufacturing, making it possible to create precise and editable 3D models. Using a variety of sensor or user-provided data as inputs for CAD reconstruction can democratize access to design applications. However, existing methods typically focus on a single input modality, such as point clouds, images, or text, which limits their generalizability and robustness. Leveraging recent advances in vision-language models (VLM), we propose a multi-modal CAD reconstruction model that simultaneously processes all three input modalities. Inspired by large language model (LLM) training paradigms, we adopt a two-stage pipeline: supervised fine-tuning (SFT) on large-scale procedurally generated data, followed by reinforcement learning (RL) fine-tuning using online feedback, obtained programatically. Furthermore, we are the first to explore RL fine-tuning of LLMs for CAD tasks demonstrating that online RL algorithms such as Group Relative Preference Optimization (GRPO) outperform offline alternatives. In the DeepCAD benchmark, our SFT model outperforms existing single-modal approaches in all three input modalities simultaneously. More importantly, after RL fine-tuning, cadrille sets new state-of-the-art on three challenging datasets, including a real-world one.

The latest TypeII codebook selects partial strongest angular-delay ports for the feedback of downlink channel state information (CSI), whereas its performance is limited due to the deficiency of utilizing the correlations among the port coefficients. To tackle this issue, we propose a tailored autoencoder named TypeII-CsiNet to effectively integrate the TypeII codebook with deep learning, wherein three novel designs are developed for sufficiently boosting the sum rate performance. Firstly, a dedicated pre-processing module is designed to sort the selected ports for reserving the correlations of their corresponding coefficients. Secondly, a position-filling layer is developed in the decoder to fill the feedback coefficients into their ports in the recovered CSI matrix, so that the corresponding angular-delay-domain structure is adequately leveraged to enhance the reconstruction accuracy. Thirdly, a two-stage loss function is proposed to improve the sum rate performance while avoiding the trapping in local optimums during model training. Simulation results verify that our proposed TypeII-CsiNet outperforms the TypeII codebook and existing deep learning benchmarks.

Reconstructing dynamic 3D scenes from sparse multi-view videos is highly ill-posed, often leading to geometric collapse, trajectory drift, and floating artifacts. Recent attempts introduce generative priors to hallucinate missing content, yet naive integration frequently causes structural drift and temporal inconsistency due to the mismatch between stochastic 2D generation and deterministic 3D geometry. In this paper, we propose GeoRect4D, a novel unified framework for sparse-view dynamic reconstruction that couples explicit 3D consistency with generative refinement via a closed-loop optimization process. Specifically, GeoRect4D introduces a degradation-aware feedback mechanism that incorporates a robust anchor-based dynamic 3DGS substrate with a single-step diffusion rectifier to hallucinate high-fidelity details. This rectifier utilizes a structural locking mechanism and spatiotemporal coordinated attention, effectively preserving physical plausibility while restoring missing content. Furthermore, we present a progressive optimization strategy that employs stochastic geometric purification to eliminate floaters and generative distillation to infuse texture details into the explicit representation. Extensive experiments demonstrate that GeoRect4D achieves state-of-the-art performance in reconstruction fidelity, perceptual quality, and spatiotemporal consistency across multiple datasets. Project Page: https://mediax-sjtu.github.io/GeoRect4D

Accelerating MRI scans is one of the principal outstanding problems in the MRI research community. Towards this goal, we hosted the second fastMRI competition targeted towards reconstructing MR images with subsampled k-space data. We provided participants with data from 7,299 clinical brain scans (de-identified via a HIPAA-compliant procedure by NYU Langone Health), holding back the fully-sampled data from 894 of these scans for challenge evaluation purposes. In contrast to the 2019 challenge, we focused our radiologist evaluations on pathological assessment in brain images. We also debuted a new Transfer track that required participants to submit models evaluated on MRI scanners from outside the training set. We received 19 submissions from eight different groups. Results showed one team scoring best in both SSIM scores and qualitative radiologist evaluations. We also performed analysis on alternative metrics to mitigate the effects of background noise and collected feedback from the participants to inform future challenges. Lastly, we identify common failure modes across the submissions, highlighting areas of need for future research in the MRI reconstruction community.

We present HSImul3R, a unified framework for simulation-ready 3D reconstruction of human-scene interactions (HSI) from casual captures, including sparse-view images and monocular videos. Existing methods suffer from a perception-simulation gap: visually plausible reconstructions often violate physical constraints, leading to instability in physics engines and failure in embodied AI applications. To bridge this gap, we introduce a physically-grounded bi-directional optimization pipeline that treats the physics simulator as an active supervisor to jointly refine human dynamics and scene geometry. In the forward direction, we employ Scene-targeted Reinforcement Learning to optimize human motion under dual supervision of motion fidelity and contact stability. In the reverse direction, we propose Direct Simulation Reward Optimization, which leverages simulation feedback on gravitational stability and interaction success to refine scene geometry. We further present HSIBench, a new benchmark with diverse objects and interaction scenarios. Extensive experiments demonstrate that HSImul3R produces the first stable, simulation-ready HSI reconstructions and can be directly deployed to real-world humanoid robots.

Computer-aided design (CAD) is the backbone of modern industrial design, yet learned CAD generators still fall short of real engineering pipelines: they neither iterate like engineers nor evaluate what engineering requires. Prior work has treated CAD generation as two disjoint steps, part synthesis and assembly, where the former is graded by proximity to a gold reference and the latter, when handled at all, is reduced to a separate constraint solving step. In this work, we introduce a more industry-native task formulation that requires a model to produce a fully assembled multi-part STEP file from a free-form engineering brief, which is then validated via finite element analysis (FEA). FEA validation reveals that Codex (GPT-5.5) and Claude Code (Opus-4.7) agents do not produce a single strict-passing artifact in the main first-attempt sweep, with the best configuration meeting only about 20% of typed requirements on average. Moreover, we introduce two additional supervision signals, a novel text-only blueprint schema and a 21-view image renderer that aids the agent's visual inspection, that better align the generation loop with how engineers iterate in practice. On S2O and Fusion360, the same feedback tools improve geometric reconstruction, with GPT-5.5/xhigh rising from 0.444 to 0.592 Box-IoU on S2O and from 0.397 to 0.505 on Fusion360. Together these signals move CAD programs toward artifacts that are not only visually plausible but also checked against physical and structural requirements.

A simulation of a real robot workspace must preserve task-relevant interactions, while policies developed in it must operate on observations available to the real robot. Yet scene reconstruction and policy development are often treated separately. We present Agentic Real-to-Sim-to-Real (Agentic RSR), a framework that links scene reconstruction, policy development, and real-robot execution through the same manipulation task. Given a workspace video, a task description, and a known robot model, an agent recovers metric scale, iteratively refines the scene using visual feedback, and checks task-relevant interactions in MuJoCo. A coding agent then develops an executable policy, progressing from privileged object poses to visual observations and randomized simulation. The policy can interleave multiple observations and actions within one invocation, while the agent uses execution feedback to continue, retry, or revise its approach. A shared task-level interface carries the policy and accumulated experience to the real robot, where fresh observations and safety checks guide execution. Using Claude Opus 5.5 through DeepSeek Harness (DSH), all 18 scenes across two robots pass the joint visual check; mean four-view Depth MAE against reference depth estimates is 0.0808 m, mean Lab ΔE_{76} is 8.01, and mean grayscale SSIM is 0.7338. In real-robot experiments, the aggregate task success rate reaches 80% of the simulation task success rate, indicating substantial retention of simulated performance on hardware. Code and reconstructed scene data will be made publicly available.

3D Gaussian Splatting (3DGS) provides high-fidelity scenes for large-scale embodied simulation, but constructing large-scale urban assets remains constrained by expensive equipment and delayed quality feedback. Preset surveys can leave complex surfaces insufficiently observed, with defects discovered only after reconstruction, requiring return visits and repeated processing. We present OpenFlyScan, a quality-guided aerial reconstruction system for consumer drones that integrates a GS quality model, a reacquisition planner, and a custom-designed mobile app. The model learns from GS rendering errors to predict regional reconstruction quality. Based on these predictions, the planner then generates complementary reacquisition strips to be executed through the app, which also supports automated oblique surveys and data transfer without additional hardware on board. Across real aerial scenes, the model effectively identifies regions that are likely to be poorly reconstructed. In the Expo West field experiment, targeted reacquisition improves PSNR at additional views by 10.95 dB. With consumer drones, OpenFlyScan integrates capture, targeted reacquisition, and reconstruction to support rapid, low-cost urban asset creation. Code and models will be made publicly available at https://openflyscan.github.io/.

Pose-Free Feed-forward 3D Gaussian Splatting (3DGS) has recently emerged as a powerful paradigm for fast scene reconstruction. However, its performance degrades significantly in long image sequences due to cumulative camera pose estimation drift, which propagates errors into geometric modeling and severely limits rendering fidelity. In this work, we revisit the long-sequence bottleneck and identify pose drift as the primary factor restricting reconstruction quality. Furthermore, while SfM-based pseudo ground-truth poses introduce sensor noise, purely rendering-based supervision often leads to optimization instability and local minima due to the entangled optimization of geometry and pose. To address the challenges, we propose a synergistic pose-free framework that explicitly couples geometry and appearance via a Raymap-Guided Coupling Module (RGC). Concretely, we anchor Gaussian centers to raymap-induced geometry and jointly optimize RGB reconstruction, raymap consistency, and camera regularization under a unified objective, yielding a bidirectional feedback loop: stronger geometry improves rendering, and appearance supervision in turn refines geometry and pose. To further stabilize learning across wide temporal ranges, we introduce a Dual-Frequency Viewpoint Scheduling strategy that combines easy-to-hard interval expansion with replay of short-interval pairs. Extensive experiments across in-domain and cross-domain datasets show consistent gains in both rendering and pose estimation, with notably improved robustness on long sequences. Ablation studies validate our central insight: explicitly designed geometry-appearance synergy is the key to scalable and drift-robust pose-free feed-forward 3D reconstruction.

High-fidelity visuo-tactile sensing is important for precise robotic manipulation, yet most vision-based tactile sensors rely on opaque coatings that enable tactile sensing but block direct visual observation. We propose MuxGel, a spatially multiplexed sensor that captures both external visual information and contact-induced tactile signals through a single camera. By using a checkerboard coating pattern, MuxGel interleaves tactile-sensitive regions with transparent windows for external vision. This design maintains standard form factors, allowing for plug-and-play integration into GelSight-style sensors by simply replacing the gel pad. To recover dense visual and tactile signals from the multiplexed inputs, we develop a U-Net-based reconstruction framework trained with a sim-to-real pipeline. Experiments on unseen objects demonstrate the framework's generalization and accuracy. We further demonstrate MuxGel in grasping tasks, where visual feedback supports alignment and tactile feedback supports contact interaction. Results show that MuxGel enables single-camera dual-modal sensing within a GelSight-style implementation, providing local visual feedback and reconstructed tactile feedback with potential extension to other optical tactile sensors. Project webpage: https://zhixianhu.github.io/muxgel/.

This paper introduces PeriodWave-Turbo, a high-fidelity and high-efficient waveform generation model via adversarial flow matching optimization. Recently, conditional flow matching (CFM) generative models have been successfully adopted for waveform generation tasks, leveraging a single vector field estimation objective for training. Although these models can generate high-fidelity waveform signals, they require significantly more ODE steps compared to GAN-based models, which only need a single generation step. Additionally, the generated samples often lack high-frequency information due to noisy vector field estimation, which fails to ensure high-frequency reproduction. To address this limitation, we enhance pre-trained CFM-based generative models by incorporating a fixed-step generator modification. We utilized reconstruction losses and adversarial feedback to accelerate high-fidelity waveform generation. Through adversarial flow matching optimization, it only requires 1,000 steps of fine-tuning to achieve state-of-the-art performance across various objective metrics. Moreover, we significantly reduce inference speed from 16 steps to 2 or 4 steps. Additionally, by scaling up the backbone of PeriodWave from 29M to 70M parameters for improved generalization, PeriodWave-Turbo achieves unprecedented performance, with a perceptual evaluation of speech quality (PESQ) score of 4.454 on the LibriTTS dataset. Audio samples, source code and checkpoints will be available at https://github.com/sh-lee-prml/PeriodWave.

Feed-forward 3D Gaussian Splatting (3DGS) promises instant scene reconstruction with high-quality novel-view synthesis. Yet, fine-grained geometry and appearance remain difficult to recover, motivating us to revisit how feed-forward models represent, aggregate, and refine detailed visual information. We introduce FineSplat, a feed-forward 3DGS framework built around fine-grained image patches. Since global multi-view attention becomes prohibitively expensive at such high token resolutions, we develop a dual-grouping strategy that combines two complementary forms of locality: view-wise grouping enables efficient interaction among neighboring views, while 3D spatial grouping reconnects geometrically related tokens that may never have interacted under view-wise grouping by lifting them into the 3D scene space. We further leverage reconstruction error as direct feedback, providing an explicit rendering-based signal to recover fine-grained structures and appearance, thereby overcoming the limitations of one-pass feed-forward prediction. Finally, a compact Gaussian generation scheme preserves the benefits of fine-grained features without unnecessarily increasing the number of primitives. Together, these designs enable FineSplat to recover richer geometry and appearance while remaining efficient and compact, achieving state-of-the-art results by a substantial margin, under the same or smaller Gaussian budgets than existing methods.

GANStrument, exploiting GANs with a pitch-invariant feature extractor and instance conditioning technique, has shown remarkable capabilities in synthesizing realistic instrument sounds. To further improve the reconstruction ability and pitch accuracy to enhance the editability of user-provided sound, we propose HyperGANStrument, which introduces a pitch-invariant hypernetwork to modulate the weights of a pre-trained GANStrument generator, given a one-shot sound as input. The hypernetwork modulation provides feedback for the generator in the reconstruction of the input sound. In addition, we take advantage of an adversarial fine-tuning scheme for the hypernetwork to improve the reconstruction fidelity and generation diversity of the generator. Experimental results show that the proposed model not only enhances the generation capability of GANStrument but also significantly improves the editability of synthesized sounds. Audio examples are available at the online demo page.

Given just a few glimpses of a scene, can you imagine the movie playing out as the camera glides through it? That's the lens we take on sparse-input novel view synthesis, not only as filling spatial gaps between widely spaced views, but also as completing a natural video unfolding through space. We recast the task as test-time natural video completion, using powerful priors from pretrained video diffusion models to hallucinate plausible in-between views. Our zero-shot, generation-guided framework produces pseudo views at novel camera poses, modulated by an uncertainty-aware mechanism for spatial coherence. These synthesized frames densify supervision for 3D Gaussian Splatting (3D-GS) for scene reconstruction, especially in under-observed regions. An iterative feedback loop lets 3D geometry and 2D view synthesis inform each other, improving both the scene reconstruction and the generated views. The result is coherent, high-fidelity renderings from sparse inputs without any scene-specific training or fine-tuning. On LLFF, DTU, DL3DV, and MipNeRF-360, our method significantly outperforms strong 3D-GS baselines under extreme sparsity.

Creative agents still lack an effective way to learn from high-quality human films, limiting their ability to produce cinematic-grade videos. A key challenge is the absence of a structured video representation that is both faithful to film content and directly usable for agentic reasoning and manipulation. To address the challenge, we propose the Agentic Video Auto-Encoder (AVA-Encoder), a framework for learning agent-native video representations via agentic auto-encoding. AVA-Encoder transforms a video into a knowledge graph (KG) representation and then reconstructs it back into video. Its hierarchy and state nodes store structured text, while a linked asset layer holds generated images, audio, and video. Typed edges preserve the relations between these text descriptions and assets in a form that agents can easily understand, query, and edit. The video reconstruction differences drive a textual-gradient optimization framework, which expresses evaluation feedback as natural-language update directions for Data-Independent Encoding Policy Pseudo-Training in the outer loop and optional Data-Dependent KG Representation Refinement in the test-time inner loop. Extensive experiments show that AVA-Encoder improves by 20.7 percentage points over the strongest external baseline. In the controlled policy-only setting, its pseudo-trained shot-level Agentic Video Encoder policy also outperforms a carefully human-tuned policy while using 74.3% fewer system-prompt tokens. We release the complete AVA-Encoder framework, a reliable agentic video reconstruction benchmark, and the first dataset of high-quality film KG representations.

The rapid advancements in Autonomous Driving Systems (ADS) have necessitated robust software testing to ensure safety and reliability. However, automating the generation of scalable and concrete test scenarios remains a significant challenge. Current scenario-based test case generation methods often face limitations, such as unrealistic scenes and inaccurate vehicle trajectories. These challenges largely result from the loss of map information during data extraction and the lack of an effective verification mechanism to mitigate hallucinations in large language models (LLMs). This paper introduces TRACE, a scenario-based ADS Test case Generation framework for Critical Scenarios. By leveraging multimodal data to extract challenging scenarios from real-world car crash reports, TRACE constructs numerous critical test cases with less data, significantly enhancing ADS bug detection efficiency. Using in-context learning, chain-of-thought prompting, and self-validation approaches, we use LLMs to extract environmental and road network information from crash reports. For vehicle trajectory planning, data containing map information and vehicle coordinates serves as a knowledge base to build a ChatGPT-based LLM with path-planning capabilities, which we named TrackMate. Based on 50 existing crash reports, our approach successfully tested three ADS models across two simulation platforms, MetaDrive and BeamNG. Of the 290 constructed test scenarios, 127 are identified as critical, as they resulted in vehicle collisions. Additionally, user feedback reveals that TRACE demonstrates superior scenario reconstruction accuracy, with 77.5% of the scenarios being rated as 'mostly or 'totally' consistent, compared to only 27% for the most related SOTA, LCTGen.

Large language models increasingly serve as long-horizon assistants and agents, where they must both accumulate information across interactions and make the relevant parts available when later requests depend on them. Existing compact online memories typically use a single persistent state both to accumulate history and to serve readout, so what the memory stores cannot be controlled separately from what it exposes to the current computation. We propose LSTMem, an LSTM-inspired online memory that instead equips each layer of a frozen LLM with two matrix-valued states: a cell state that accumulates history and a hidden state whose readouts correct the backbone's attention. Input and forget gates control what the cell stores, while an output gate separately controls what the cell exposes through the hidden state. LSTMem further connects memory across depth through forward hidden-state propagation and block-end feedback, and uses higher-layer reconstruction gradients to refine lower-layer cell states before rebuilding hidden states from shallow to deep layers. Across memory benchmarks on Qwen3-4B-Instruct, LSTMem consistently improves MemoryAgentBench, LoCoMo, and HotpotQA over the plain backbone. Comparisons further show that the LSTM-based memory formulation outperforms an associative-memory counterpart, while removing cross-layer hidden-memory propagation degrades performance. These results demonstrate the benefits of separating memory accumulation from memory expression and organizing memory hierarchically across model depth. The code is available at https://github.com/Longchentong/LSTMem.

Despite recent progress, recovering parametric CAD construction sequences from geometric input, such as meshes or point clouds, is a key challenge for design and manufacturing, as existing CAD reconstruction and generation methods are largely restricted to difficult-to-edit formats like meshes or Breps or editable simple sketch-and-extrude pipelines and low-complexity datasets. We introduce CADFit, a hybrid optimization-based CAD reconstruction framework that recovers complex, editable CAD construction sequences from meshes by incrementally fitting and validating parametric operations using geometric feedback. Our approach is distinguished by formulating reconstruction as an IoU-driven optimization over structured CAD programs and supporting a rich set of operations, including extrusions, revolutions, fillets, and chamfers. Experiments on multiple CAD benchmarks show that CADFit outperforms state-of-the-art mesh-to-CAD methods in volumetric Intersection-over-Union and Chamfer Distance, while substantially reducing the Invalid Ratio of reconstructed CAD programs, particularly for complex designs. We further present a multimodal pipeline that enables end-to-end reconstruction of CAD construction sequences from images by combining image-based geometry reconstruction with CADFit. By enabling accurate reconstruction of higher-complexity CAD models, CADFit provides a practical foundation for generating richer datasets and advancing future learning-based approaches to CAD reverse engineering. The code is available at: https://github.com/ghadinehme/CADFit.

Neural Radiance Fields (NeRF) have shown impressive novel view synthesis results; nonetheless, even thorough recordings yield imperfections in reconstructions, for instance due to poorly observed areas or minor lighting changes. Our goal is to mitigate these imperfections from various sources with a joint solution: we take advantage of the ability of generative adversarial networks (GANs) to produce realistic images and use them to enhance realism in 3D scene reconstruction with NeRFs. To this end, we learn the patch distribution of a scene using an adversarial discriminator, which provides feedback to the radiance field reconstruction, thus improving realism in a 3D-consistent fashion. Thereby, rendering artifacts are repaired directly in the underlying 3D representation by imposing multi-view path rendering constraints. In addition, we condition a generator with multi-resolution NeRF renderings which is adversarially trained to further improve rendering quality. We demonstrate that our approach significantly improves rendering quality, e.g., nearly halving LPIPS scores compared to Nerfacto while at the same time improving PSNR by 1.4dB on the advanced indoor scenes of Tanks and Temples.

Generating a high-quality gaming world from a natural-language game intent requires joint reasoning about scene structure, spatial layout, gameplay objectives, interactive entities, and executable gameplay logic. Existing coding agents can generate individual assets, scenes, or scripts, but often struggle to maintain consistency across these components. We propose Code2Games, an agentic framework that builds a structured gaming world upon a base Blender world generated from the same game intent. Code2Games coordinates scene analysis, gameplay planning, constrained gaming-world generation, and gaming-engine customization through a shared scene-gameplay representation with persistent element correspondence. After world generation, Code2Games adapts the generated world to Unreal Engine 5 and employs an execution-guided reconstruction process that uses compilation diagnostics, runtime feedback, and gameplay test results to resolve inconsistencies arising during engine adaptation. To systematically evaluate gaming-world generation, we introduce the GameCode4D benchmark, which comprises ten fixed game prompts spanning different levels of scene and gameplay complexity. We evaluate the generated results across four dimensions: visual quality, interactive fidelity, multimodal artifact quality, and playable-game quality. Experiments demonstrate that, compared with direct gaming-world generation by coding agents and existing baseline methods, Code2Games consistently improves the visual quality and interactive fidelity of generated gaming worlds, as well as the quality of the resulting games after engine adaptation.

We study fact-level repair for multimodal generation, where a fluent output may contain specific facts that are not supported by the input. Existing inference-time repair methods often generate feedback by jointly conditioning on the input and the current output. This design has two limitations: hallucinated claims in the output can bias the model's interpretation of the input, and free-form feedback cannot be ranked or scheduled at the fact level. We present TIGER, an inference-time framework that redesigns feedback for localized repair. TIGER independently extracts an observation graph from the input and a claim graph from the current output, then assigns each claim a graph-conditioned risk score based on support and conflict. The model repairs selected high-risk claims while keeping the backbone frozen. We provide a convergence analysis showing that the expected total risk decreases geometrically to an explicit asymptotic bound under mild assumptions. Experiments across four cross-modal paths, including image-to-text, image+text-to-text, audio-to-text, and video-to-text, show that TIGER reduces unsupported content while preserving task quality. The gains hold across multiple backbones, and a CrisisFACTS case study suggests that the same repair mechanism can improve grounding in multi-source settings.

Modern reconstruction techniques can effectively model complex 3D scenes from sparse 2D views. However, automatically assessing the quality of novel views and identifying artifacts is challenging due to the lack of ground truth images and the limitations of no-reference image metrics in predicting detailed artifact maps. The absence of such quality metrics hinders accurate predictions of the quality of generated views and limits the adoption of post-processing techniques, such as inpainting, to enhance reconstruction quality. In this work, we propose a new no-reference metric, Puzzle Similarity, which is designed to localize artifacts in novel views. Our approach utilizes image patch statistics from the input views to establish a scene-specific distribution that is later used to identify poorly reconstructed regions in the novel views. We test and evaluate our method in the context of 3D reconstruction; to this end, we collected a novel dataset of human quality assessment in unseen reconstructed views. Through this dataset, we demonstrate that our method can not only successfully localize artifacts in novel views, correlating with human assessment, but do so without direct references. Surprisingly, our metric outperforms both no-reference metrics and popular full-reference image metrics. We can leverage our new metric to enhance applications like automatic image restoration, guided acquisition, or 3D reconstruction from sparse inputs.

Existing image inpainting methods often produce artifacts when dealing with large holes in real applications. To address this challenge, we propose an iterative inpainting method with a feedback mechanism. Specifically, we introduce a deep generative model which not only outputs an inpainting result but also a corresponding confidence map. Using this map as feedback, it progressively fills the hole by trusting only high-confidence pixels inside the hole at each iteration and focuses on the remaining pixels in the next iteration. As it reuses partial predictions from the previous iterations as known pixels, this process gradually improves the result. In addition, we propose a guided upsampling network to enable generation of high-resolution inpainting results. We achieve this by extending the Contextual Attention module to borrow high-resolution feature patches in the input image. Furthermore, to mimic real object removal scenarios, we collect a large object mask dataset and synthesize more realistic training data that better simulates user inputs. Experiments show that our method significantly outperforms existing methods in both quantitative and qualitative evaluations. More results and Web APP are available at https://zengxianyu.github.io/iic.

Text-rich image generation is one of the most challenging settings in image generation, since models must simultaneously produce visually realistic images and render legible, semantically aligned, and layout-consistent text. Existing data pipelines usually follow a static crawl-filter-freeze paradigm. They collect candidate samples, filter them once, and freeze the accepted data for training. However, rejected samples are usually discarded, although they often contain useful failure signals such as OCR errors and semantic mismatches. As a result, later construction rounds may repeat the same failure modes. To address these limitations, we propose DataEvolver, a self-evolving multi-agent framework for text-rich image data construction. DataEvolver treats data construction as feedback-driven construction policy evolution. A Retriever collects candidate samples, a Verifier assigns quality scores and rejection causes, a Critic summarizes round-level feedback into semantic feedback, and a Generator completes under-covered regions through targeted synthesis. The updated feedback memory then guides the next construction round. Experiments on text-rich image generation benchmarks show that DataEvolver produces more useful training data than fixed-dataset baselines under matched data budgets. At the 0.75M scale on PixArt-alpha, DataEvolver improves OCR-F1 over the strongest baseline by 85.3 percent on TextScenesHQ and 35.3 percent on LongTextBench. The improvements are consistent across both evaluated benchmarks and also transfer to Show-o2, indicating that the benefit of DataEvolver is not tied to a single downstream generator. These results suggest that rejected samples can provide actionable feedback for improving text-rich image data construction.

Frozen models trained to mimic static datasets can never improve their performance. Models that can employ internet-retrieval for up-to-date information and obtain feedback from humans during deployment provide the promise of both adapting to new information, and improving their performance. In this work we study how to improve internet-driven conversational skills in such a learning framework. We collect deployment data, which we make publicly available, of human interactions, and collect various types of human feedback -- including binary quality measurements, free-form text feedback, and fine-grained reasons for failure. We then study various algorithms for improving from such feedback, including standard supervised learning, rejection sampling, model-guiding and reward-based learning, in order to make recommendations on which type of feedback and algorithms work best. We find the recently introduced Director model (Arora et al., '22) shows significant improvements over other existing approaches.

Providing asynchronous feedback is a critical step in the 3D design workflow. A common approach to providing feedback is to pair textual comments with companion reference images, which helps illustrate the gist of text. Ideally, feedback providers should possess 3D and image editing skills to create reference images that can effectively describe what they have in mind. However, they often lack such skills, so they have to resort to sketches or online images which might not match well with the current 3D design. To address this, we introduce MemoVis, a text editor interface that assists feedback providers in creating reference images with generative AI driven by the feedback comments. First, a novel real-time viewpoint suggestion feature, based on a vision-language foundation model, helps feedback providers anchor a comment with a camera viewpoint. Second, given a camera viewpoint, we introduce three types of image modifiers, based on pre-trained 2D generative models, to turn a text comment into an updated version of the 3D scene from that viewpoint. We conducted a within-subjects study with feedback providers, demonstrating the effectiveness of MemoVis. The quality and explicitness of the companion images were evaluated by another eight participants with prior 3D design experience.

Large multimodal models (LMMs) suffer from multimodal hallucination, where they provide incorrect responses misaligned with the given visual information. Recent works have conjectured that one of the reasons behind multimodal hallucination might be due to the vision encoder failing to ground on the image properly. To mitigate this issue, we propose a novel approach that leverages self-feedback as visual cues. Building on this approach, we introduce Volcano, a multimodal self-feedback guided revision model. Volcano generates natural language feedback to its initial response based on the provided visual information and utilizes this feedback to self-revise its initial response. Volcano effectively reduces multimodal hallucination and achieves state-of-the-art on MMHal-Bench, POPE, and GAVIE. It also improves on general multimodal abilities and outperforms previous models on MM-Vet and MMBench. Through a qualitative analysis, we show that Volcano's feedback is properly grounded on the image than the initial response. This indicates that Volcano can provide itself with richer visual information, helping alleviate multimodal hallucination. We publicly release Volcano models of 7B and 13B sizes along with the data and code at https://github.com/kaistAI/Volcano.

Generalizable neural surface reconstruction techniques have attracted great attention in recent years. However, they encounter limitations of low confidence depth distribution and inaccurate surface reasoning due to the oversimplified volume rendering process employed. In this paper, we present Reconstruction TRansformer (ReTR), a novel framework that leverages the transformer architecture to redesign the rendering process, enabling complex render interaction modeling. It introduces a learnable meta-ray token and utilizes the cross-attention mechanism to simulate the interaction of rendering process with sampled points and render the observed color. Meanwhile, by operating within a high-dimensional feature space rather than the color space, ReTR mitigates sensitivity to projected colors in source views. Such improvements result in accurate surface assessment with high confidence. We demonstrate the effectiveness of our approach on various datasets, showcasing how our method outperforms the current state-of-the-art approaches in terms of reconstruction quality and generalization ability. Our code is available at https://github.com/YixunLiang/ReTR.

Most research on question answering focuses on the pre-deployment stage; i.e., building an accurate model for deployment. In this paper, we ask the question: Can we improve QA systems further post-deployment based on user interactions? We focus on two kinds of improvements: 1) improving the QA system's performance itself, and 2) providing the model with the ability to explain the correctness or incorrectness of an answer. We collect a retrieval-based QA dataset, FeedbackQA, which contains interactive feedback from users. We collect this dataset by deploying a base QA system to crowdworkers who then engage with the system and provide feedback on the quality of its answers. The feedback contains both structured ratings and unstructured natural language explanations. We train a neural model with this feedback data that can generate explanations and re-score answer candidates. We show that feedback data not only improves the accuracy of the deployed QA system but also other stronger non-deployed systems. The generated explanations also help users make informed decisions about the correctness of answers. Project page: https://mcgill-nlp.github.io/feedbackqa/

Reusable skills improve multimodal agents without updating model weights, but their effectiveness depends on both the evidence presented and the procedure used to read it. We introduce ViewCraft, which jointly evolves an executable evidence interface and its reading procedure. The interface selects, transforms, and organizes observations; the reader interprets the resulting views. Failure traces guide revisions, replay and paired evaluation retain useful changes, and interface projection recovers visual edits from eligible rejected joint proposals. Across eight benchmarks, ViewCraft improves over direct execution by an average of 6.1 points in task score, with gains on every benchmark. The advantage persists at a matched input-token budget. On all five multi-source tasks, the learned interface uses 8%-15% fewer input tokens than Initial skill. The learned skills also transfer across executors and outperform direct execution in every evaluated transfer, supporting evidence construction and reading as a coupled, reusable skill.

Agent Skills are today either hand-authored or produced in a single LLM generation pass, and consequently possess no closed loop through which they might improve from the interaction failures they actually cause. Recent work does close this loop, but derives its feedback from single-turn question-answering evaluation. The consequence is a sharp asymmetry: once the first round has patched the gaps that a single exchange can reveal, the evolution gradient decays, the defects that surface only across multiple turns remain invisible, and evolution stalls. Governance in these systems is likewise driven by an end-to-end verification score, a scalar gate that can reject a degraded candidate but can neither localize nor repair its structural cause. We argue that the binding constraint on sustained skill evolution is neither editing capability nor the number of iterations, but whether the evaluation feedback keeps supplying trustworthy evolution gradients. We introduce SkillEvo, in which trustworthy feedback generates the gradient and controllable governance constrains its direction. The first component recasts multi-turn user simulation from an evaluation endpoint into a feedback generator: follow-up questions expose defects layer by layer, so that every round of revision both consumes feedback and produces new feedback. The second replaces the passive rejection of a scalar gate with an independent governance layer that actively repairs factual degradation and structural bloat, preventing the gradient from drifting as degradation accumulates. Across six categories of cloud services, 9 production Skills, and 98 skill-reference files, SkillEvo surpasses self-reflection-based evolution by 23.0 points and single- turn-QA-driven evolution by 15.4 points.

Recent Text-to-Image (T2I) generation models such as Stable Diffusion and Imagen have made significant progress in generating high-resolution images based on text descriptions. However, many generated images still suffer from issues such as artifacts/implausibility, misalignment with text descriptions, and low aesthetic quality. Inspired by the success of Reinforcement Learning with Human Feedback (RLHF) for large language models, prior works collected human-provided scores as feedback on generated images and trained a reward model to improve the T2I generation. In this paper, we enrich the feedback signal by (i) marking image regions that are implausible or misaligned with the text, and (ii) annotating which words in the text prompt are misrepresented or missing on the image. We collect such rich human feedback on 18K generated images and train a multimodal transformer to predict the rich feedback automatically. We show that the predicted rich human feedback can be leveraged to improve image generation, for example, by selecting high-quality training data to finetune and improve the generative models, or by creating masks with predicted heatmaps to inpaint the problematic regions. Notably, the improvements generalize to models (Muse) beyond those used to generate the images on which human feedback data were collected (Stable Diffusion variants).

Robust 3D perception under corruption has become an essential task for the realm of 3D vision. While current data augmentation techniques usually perform random transformations on all point cloud objects in an offline way and ignore the structure of the samples, resulting in over-or-under enhancement. In this work, we propose an alternative to make sample-adaptive transformations based on the structure of the sample to cope with potential corruption via an auto-augmentation framework, named as AdaptPoint. Specially, we leverage a imitator, consisting of a Deformation Controller and a Mask Controller, respectively in charge of predicting deformation parameters and producing a per-point mask, based on the intrinsic structural information of the input point cloud, and then conduct corruption simulations on top. Then a discriminator is utilized to prevent the generation of excessive corruption that deviates from the original data distribution. In addition, a perception-guidance feedback mechanism is incorporated to guide the generation of samples with appropriate difficulty level. Furthermore, to address the paucity of real-world corrupted point cloud, we also introduce a new dataset ScanObjectNN-C, that exhibits greater similarity to actual data in real-world environments, especially when contrasted with preceding CAD datasets. Experiments show that our method achieves state-of-the-art results on multiple corruption benchmarks, including ModelNet-C, our ScanObjectNN-C, and ShapeNet-C.

Text-guided image generation and editing using diffusion models have achieved remarkable advancements. Among these, tuning-free methods have gained attention for their ability to perform edits without extensive model adjustments, offering simplicity and efficiency. However, existing tuning-free approaches often struggle with balancing fidelity and editing precision. Reconstruction errors in DDIM Inversion are partly attributed to the cross-attention mechanism in U-Net, which introduces misalignments during the inversion and reconstruction process. To address this, we analyze reconstruction from a structural perspective and propose a novel approach that replaces traditional cross-attention with uniform attention maps, significantly enhancing image reconstruction fidelity. Our method effectively minimizes distortions caused by varying text conditions during noise prediction. To complement this improvement, we introduce an adaptive mask-guided editing technique that integrates seamlessly with our reconstruction approach, ensuring consistency and accuracy in editing tasks. Experimental results demonstrate that our approach not only excels in achieving high-fidelity image reconstruction but also performs robustly in real image composition and editing scenarios. This study underscores the potential of uniform attention maps to enhance the fidelity and versatility of diffusion-based image processing methods. Code is available at https://github.com/Mowenyii/Uniform-Attention-Maps.

Image restoration has traditionally required training specialized models on thousands of paired examples per degradation type. We challenge this paradigm by demonstrating that powerful pre-trained text-conditioned image editing models can be efficiently adapted for multiple restoration tasks through parameter-efficient fine-tuning with remarkably few examples. Our approach fine-tunes LoRA adapters on FLUX.1 Kontext, a state-of-the-art 12B parameter flow matching model for image-to-image translation, using only 16-128 paired images per task, guided by simple text prompts that specify the restoration operation. Unlike existing methods that train specialized restoration networks from scratch with thousands of samples, we leverage the rich visual priors already encoded in large-scale pre-trained editing models, dramatically reducing data requirements while maintaining high perceptual quality. A single unified LoRA adapter, conditioned on task-specific text prompts, effectively handles multiple degradations including denoising, deraining, and dehazing. Through comprehensive ablation studies, we analyze: (i) the impact of training set size on restoration quality, (ii) trade-offs between task-specific versus unified multi-task adapters, (iii) the role of text encoder fine-tuning, and (iv) zero-shot baseline performance. While our method prioritizes perceptual quality over pixel-perfect reconstruction metrics like PSNR/SSIM, our results demonstrate that pre-trained image editing models, when properly adapted, offer a compelling and data-efficient alternative to traditional image restoration approaches, opening new avenues for few-shot, prompt-guided image enhancement. The code to reproduce our results are available at: https://github.com/makinyilmaz/Edit2Restore

Fine-tuning multi-turn dialogue systems requires high-quality supervision but often suffers from degraded performance when exposed to low-quality data. Supervision errors in early turns can propagate across subsequent turns, undermining coherence and response quality. Existing methods typically address data quality via static prefiltering, which decouples quality control from training and fails to mitigate turn-level error propagation. In this context, we propose ReSURE (Regularizing Supervision UnREliability), an adaptive learning method that dynamically down-weights unreliable supervision without explicit filtering. ReSURE estimates per-turn loss distributions using Welford's online statistics and reweights sample losses on the fly accordingly. Experiments on both single-source and mixed-quality datasets show improved stability and response quality. Notably, ReSURE enjoys positive Spearman correlations (0.21 ~ 1.0 across multiple benchmarks) between response scores and number of samples regardless of data quality, which potentially paves the way for utilizing large-scale data effectively. Code is publicly available at https://github.com/Elvin-Yiming-Du/ReSURE_Multi_Turn_Training.

What do auto-encoders learn about the underlying data generating distribution? Recent work suggests that some auto-encoder variants do a good job of capturing the local manifold structure of data. This paper clarifies some of these previous observations by showing that minimizing a particular form of regularized reconstruction error yields a reconstruction function that locally characterizes the shape of the data generating density. We show that the auto-encoder captures the score (derivative of the log-density with respect to the input). It contradicts previous interpretations of reconstruction error as an energy function. Unlike previous results, the theorems provided here are completely generic and do not depend on the parametrization of the auto-encoder: they show what the auto-encoder would tend to if given enough capacity and examples. These results are for a contractive training criterion we show to be similar to the denoising auto-encoder training criterion with small corruption noise, but with contraction applied on the whole reconstruction function rather than just encoder. Similarly to score matching, one can consider the proposed training criterion as a convenient alternative to maximum likelihood because it does not involve a partition function. Finally, we show how an approximate Metropolis-Hastings MCMC can be setup to recover samples from the estimated distribution, and this is confirmed in sampling experiments.

Datasets scraped from the internet have been critical to the successes of large-scale machine learning. Yet, this very success puts the utility of future internet-derived datasets at potential risk, as model outputs begin to replace human annotations as a source of supervision. In this work, we first formalize a system where interactions with one model are recorded as history and scraped as training data in the future. We then analyze its stability over time by tracking changes to a test-time bias statistic (e.g. gender bias of model predictions). We find that the degree of bias amplification is closely linked to whether the model's outputs behave like samples from the training distribution, a behavior which we characterize and define as consistent calibration. Experiments in three conditional prediction scenarios - image classification, visual role-labeling, and language generation - demonstrate that models that exhibit a sampling-like behavior are more calibrated and thus more stable. Based on this insight, we propose an intervention to help calibrate and stabilize unstable feedback systems. Code is available at https://github.com/rtaori/data_feedback.

LLMs demonstrate remarkable capabilities in following natural language instructions, largely due to instruction-tuning on high-quality datasets. While synthetic data generation has emerged as a scalable approach for creating such datasets, maintaining consistent quality standards remains challenging. Recent approaches incorporate feedback to improve data quality, but typically operate at the sample level, generating and applying feedback for each response individually. In this work, we propose Reference-Level Feedback, a novel methodology that instead collects feedback based on high-quality reference samples from carefully curated seed data. We use this feedback to capture rich signals of desirable characteristics and propagate it throughout the data synthesis process. We present REFED, a dataset of 10K instruction-response pairs synthesized using such feedback. We demonstrate the effectiveness of our approach by showing that Llama-3.1-8B-Instruct finetuned on REFED achieves state-of-the-art performance among similar-sized SFT-based models on AlpacaEval 2.0 and strong results on Arena-Hard. Through extensive experiments, we show that our approach consistently outperforms traditional sample-level feedback methods with significantly fewer feedback collections and improves performance across different model architectures.

Generative models can turn natural-language prompts into images, text, code, and other content, lowering the cost of producing drafts and components. Their practical impact increasingly depends on whether those pieces can become complete, dependable deliverables. This survey examines agentic artifact creation, which we define as stateful construction in which an AI system materially constructs or revises a deliverable and intermediate observations redirect later work. Functionally, the process links an operational representation of the artifact, a construction policy, and runtime verification whose feedback can redirect later actions. We reviewed 259 works available through August 20, 2026: 230 systems meeting this definition and 29 benchmarks of agentic artifact construction. We compare six artifact families, then analyze application settings and evaluation practice as separate dimensions. Across families, construction challenges reflect not only modality but also how tightly decisions are coupled and whether failures become visible while they remain repairable. Decomposition can reduce local complexity while increasing coordination and reassembly costs. Learned judges may add little independent evidence when they share the generator's preferences or blind spots. We formulate principles for keeping commitments and responsibility explicit, turning feedback into targeted repair, and revalidating affected state after change. We also identify opportunities for sustaining coherent, accountable control as artifacts, creator intent, and construction systems evolve. A curated paper list is available at https://github.com/GeminiLight/awesome-agentic-artifact-creation.

The success of self-supervised contrastive learning hinges on identifying positive data pairs, such that when they are pushed together in embedding space, the space encodes useful information for subsequent downstream tasks. Constructing positive pairs is non-trivial as the pairing must be similar enough to reflect a shared semantic meaning, but different enough to capture within-class variation. Classical approaches in vision use augmentations to exploit well-established invariances to construct positive pairs, but invariances in the time-series domain are much less obvious. In our work, we propose a novel method of using a learned measure for identifying positive pairs. Our Retrieval-Based Reconstruction (REBAR) measure measures the similarity between two sequences as the reconstruction error that results from reconstructing one sequence with retrieved information from the other. Then, if the two sequences have high REBAR similarity, we label them as a positive pair. Through validation experiments, we show that the REBAR error is a predictor of mutual class membership. Once integrated into a contrastive learning framework, our REBAR method learns an embedding that achieves state-of-the-art performance on downstream tasks across various modalities.

Reconstruction and joint embedding have emerged as two leading paradigms in Self Supervised Learning (SSL). Reconstruction methods focus on recovering the original sample from a different view in input space. On the other hand, joint embedding methods align the representations of different views in latent space. Both approaches offer compelling advantages, yet practitioners lack clear guidelines for choosing between them. In this work, we unveil the core mechanisms that distinguish each paradigm. By leveraging closed form solutions for both approaches, we precisely characterize how the view generation process, e.g. data augmentation, impacts the learned representations. We then demonstrate that, unlike supervised learning, both SSL paradigms require a minimal alignment between augmentations and irrelevant features to achieve asymptotic optimality with increasing sample size. Our findings indicate that in scenarios where these irrelevant features have a large magnitude, joint embedding methods are preferable because they impose a strictly weaker alignment condition compared to reconstruction based methods. These results not only clarify the trade offs between the two paradigms but also substantiate the empirical success of joint embedding approaches on real world challenging datasets.

Many recent advances in natural language generation have been fueled by training large language models on internet-scale data. However, this paradigm can lead to models that generate toxic, inaccurate, and unhelpful content, and automatic evaluation metrics often fail to identify these behaviors. As models become more capable, human feedback is an invaluable signal for evaluating and improving models. This survey aims to provide an overview of the recent research that has leveraged human feedback to improve natural language generation. First, we introduce an encompassing formalization of feedback, and identify and organize existing research into a taxonomy following this formalization. Next, we discuss how feedback can be described by its format and objective, and cover the two approaches proposed to use feedback (either for training or decoding): directly using the feedback or training feedback models. We also discuss existing datasets for human-feedback data collection, and concerns surrounding feedback collection. Finally, we provide an overview of the nascent field of AI feedback, which exploits large language models to make judgments based on a set of principles and minimize the need for human intervention.

This paper introduces reconstructive visual instruction tuning (ROSS), a family of Large Multimodal Models (LMMs) that exploit vision-centric supervision signals. In contrast to conventional visual instruction tuning approaches that exclusively supervise text outputs, ROSS prompts LMMs to supervise visual outputs via reconstructing input images. By doing so, it capitalizes on the inherent richness and detail present within input images themselves, which are often lost in pure text supervision. However, producing meaningful feedback from natural images is challenging due to the heavy spatial redundancy of visual signals. To address this issue, ROSS employs a denoising objective to reconstruct latent representations of input images, avoiding directly regressing exact raw RGB values. This intrinsic activation design inherently encourages LMMs to maintain image detail, thereby enhancing their fine-grained comprehension capabilities and reducing hallucinations. Empirically, ROSS consistently brings significant improvements across different visual encoders and language models. In comparison with extrinsic assistance state-of-the-art alternatives that aggregate multiple visual experts, ROSS delivers competitive performance with a single SigLIP visual encoder, demonstrating the efficacy of our vision-centric supervision tailored for visual outputs.

Natural-language critiques provide supervision beyond scalar rewards for non-verifiable generation, which lacks deterministic verifiers. In critique-guided refinement, a critic gives feedback on an initial response and an actor revises it. However, final revision quality does not reveal whether the critique was actually useful: a capable actor may improve without following the feedback, while valid feedback may fail if the actor cannot execute it. We frame critique as actor-conditioned revision guidance, where usefulness depends on whether the feedback helps the target actor address the intended weakness. We introduce TAIScore (Targeted Actionable Improvement Score), a reward that evaluates the instruction, initial response, critique, and revision together, assessing whether the critique targets a real weakness, whether the actor follows it, and whether the intended aspect improves. We use this reward to train an actor-tailored critic with GRPO, and use critique-guided refinements to construct DPO preference pairs for the actor, forming a co-evolving critic-actor loop where the critic adapts to the actor's changing capability. Experiments show that an 8B critic trained with TAIScore outperforms both a zero-shot 120B critic and critics trained with outcome-only or critique-only reward signals. Co-evolving the critic and actor further improves performance, suggesting that effective critique supervision should adapt as the actor changes.

LLM agents can improve across tasks without updating model parameters by storing experience from their own executions in external memory and reusing it to guide later decisions. A central design question is whether to retain only observed trajectories and outcomes or also the rules, summaries, and skills inferred from them. Retaining these abstractions allows agents to reuse strategies without repeatedly deriving them from raw trajectories. However, errors in stored abstractions can propagate to subsequent decisions through retrieval and reuse. They can also shape execution trajectories, which then become the basis for new abstractions that reproduce the original errors. We term this feedback mechanism error reproduction: errors are regenerated through a cycle of abstraction, execution, and re-abstraction, extending their persistence beyond direct reuse of the original faulty knowledge. We propose Anti-Persistence, a memory design that accumulates trajectories and outcomes while reconstructing task-specific guidance on demand. An adaptive selector uses prior outcomes to decide whether and how to synthesize guidance, which is discarded after execution. This prevents its direct reuse as a stored object, although indirect feedback through retained trajectories remains possible. Across different benchmarks and backbones, Anti-Persistence achieves higher overall held-out success and the lowest average LLM-call cost among the evaluated memory designs. These results support separating experience accumulation from abstraction persistence in memorybased self-improvement.

Large Language Models (LLMs) often generate code with subtle but critical bugs, especially for complex tasks. Existing automated repair methods typically rely on superficial pass/fail signals, offering limited visibility into program behavior and hindering precise error localization. In addition, without a way to learn from prior failures, repair processes often fall into repetitive and inefficient cycles. To overcome these challenges, we present TraceCoder, a collaborative multi-agent framework that emulates the observe-analyze-repair process of human experts. The framework first instruments the code with diagnostic probes to capture fine-grained runtime traces, enabling deep insight into its internal execution. It then conducts causal analysis on these traces to accurately identify the root cause of the failure. This process is further enhanced by a novel Historical Lesson Learning Mechanism (HLLM), which distills insights from prior failed repair attempts to inform subsequent correction strategies and prevent recurrence of similar mistakes. To ensure stable convergence, a Rollback Mechanism enforces that each repair iteration constitutes a strict improvement toward the correct solution. Comprehensive experiments across multiple benchmarks show that TraceCoder achieves up to a 34.43\% relative improvement in Pass@1 accuracy over existing advanced baselines. Ablation studies verify the significance of each system component, with the iterative repair process alone contributing a 65.61\% relative gain in accuracy. Furthermore, TraceCoder significantly outperforms leading iterative methods in terms of both accuracy and cost-efficiency.

Recent advances in multimodal large language models (MLLMs) and 3D generation have expanded 3D understanding and synthesis. However, beyond visual fidelity, task-specific correctness grounded in 3D evidence remains a major challenge. We argue that building reliable 3D systems requires not only stronger generation and reasoning, but also verification feedback that identifies unmet requirements and explains their violations, allowing systems to reflect on and refine their outputs. Such feedback must integrate multi-view observations and distinguish genuine inconsistencies from projection-dependent appearances. We make three contributions. First, we introduce 3DVerifierBench, a benchmark spanning 10 tasks that evaluates decisions, rejection explanations, and responses to controlled changes in specifications and candidates. A human study reveals a 21.6 percentage-point gap between humans and the strongest tested model, GPT-6 Astra, while explanation-aware analysis exposes weaknesses in rejection reliability. Second, we analyze verification across fine-grained factual categories, exposing errors in values and target binding. We develop a scalable pipeline combining multi-view fact extraction, controlled 3D editing, and native annotations to produce 14,126 training examples with contradiction explanations and linked counterfactuals. Third, we examine how verification could support 3D generation through candidate selection and recursive refinement. In human-labeled sixteen-candidate pools, oracle selection improves complete factual success from 26.7% to 90.0%. In a separate eight-input study, human-guided recursive refinement satisfies all seven requirements for every input, compared with three under parallel Oracle@8. Together, our benchmark, analysis, and data pipeline establish a foundation for models to reflect on 3D content through reliable verification feedback.

MRI is an indispensable clinical tool, offering a rich variety of tissue contrasts to support broad diagnostic and research applications. Clinical exams routinely acquire multiple structural sequences that provide complementary information for differential diagnosis, while research protocols often incorporate advanced functional, diffusion, spectroscopic, and relaxometry sequences to capture multidimensional insights into tissue structure and composition. However, these capabilities come at the cost of prolonged scan times, which reduce patient throughput, increase susceptibility to motion artifacts, and may require trade-offs in image quality or diagnostic scope. Over the last two decades, advances in image reconstruction algorithms--alongside improvements in hardware and pulse sequence design--have made it possible to accelerate acquisitions while preserving diagnostic quality. Central to this progress is the ability to incorporate prior information to regularize the solutions to the reconstruction problem. In this tutorial, we overview the basics of MRI reconstruction and highlight state-of-the-art approaches, beginning with classical methods that rely on explicit hand-crafted priors, and then turning to deep learning methods that leverage a combination of learned and crafted priors to further push the performance envelope. We also explore the translational aspects and eventual clinical implications of these methods. We conclude by discussing future directions to address remaining challenges in MRI reconstruction. The tutorial is accompanied by a Python toolbox (https://github.com/tutorial-MRI-recon/tutorial) to demonstrate select methods discussed in the article.

Image restoration is a fundamental problem that involves recovering a high-quality clean image from its degraded observation. All-In-One image restoration models can effectively restore images from various types and levels of degradation using degradation-specific information as prompts to guide the restoration model. In this work, we present the first approach that uses human-written instructions to guide the image restoration model. Given natural language prompts, our model can recover high-quality images from their degraded counterparts, considering multiple degradation types. Our method, InstructIR, achieves state-of-the-art results on several restoration tasks including image denoising, deraining, deblurring, dehazing, and (low-light) image enhancement. InstructIR improves +1dB over previous all-in-one restoration methods. Moreover, our dataset and results represent a novel benchmark for new research on text-guided image restoration and enhancement. Our code, datasets and models are available at: https://github.com/mv-lab/InstructIR

Large language models (LLMs) often struggle with visualization tasks like plotting diagrams, charts, where success depends on both code correctness and visual semantics. Existing instruction-tuning datasets lack execution-grounded supervision and offer limited support for iterative code correction, resulting in fragile and unreliable plot generation. We present VisCode-200K, a large-scale instruction tuning dataset for Python-based visualization and self-correction. It contains over 200K examples from two sources: (1) validated plotting code from open-source repositories, paired with natural language instructions and rendered plots; and (2) 45K multi-turn correction dialogues from Code-Feedback, enabling models to revise faulty code using runtime feedback. We fine-tune Qwen2.5-Coder-Instruct on VisCode-200K to create VisCoder, and evaluate it on PandasPlotBench. VisCoder significantly outperforms strong open-source baselines and approaches the performance of proprietary models like GPT-4o-mini. We further adopt a self-debug evaluation protocol to assess iterative repair, demonstrating the benefits of feedback-driven learning for executable, visually accurate code generation.

Self-evolving skill systems promise to improve agents by turning execution feedback into persistent skill updates without changing the underlying model. Yet it remains unclear when further evolution helps, how successful and failed trajectories shape revision, and whether extra test-time computation can recover the same gains. To address these questions, we present a controlled evaluation framework across five benchmarks and three models. Our primary study contains 42 feedback runs across 14 supported model-benchmark settings. Within each setting, we hold the executor and optimizer configuration, revision procedure, validation rule, and round budget fixed, while varying only the feedback shown to the optimizer: successes and failures (Normal), failures only, or successes only. Evolution is sparse: only 55 of 388 candidates establish byte-distinct validation bests. Validation-based selection chooses an evolved skill in 11 of 14 settings, nine of which improve released-test performance. All 11 selections come from feedback conditions that include failed trajectories, although the relative ranking of Normal and Fail-only varies across settings. Validation and downstream evaluations on test, robustness, and transfer sometimes favor different feedback views. A broader SearchQA analysis covering eight models shows similarly sparse, feedback-dependent dynamics. In the GPT-5.5 test-time-scaling controls, oracle Parallel Sampling comes within 0.43 points of the evolved SearchQA skill but remains 30.96 points behind on SpreadsheetBench; Sequential Refinement recovers neither gain. Overall, persistent skill self-evolution is better understood as sparse, validation-filtered search with model- and benchmark-dependent returns, rather than steady improvement from additional rounds. The implementation is available at https://github.com/HKUST-KnowComp/rethinkskill.

Large language models (LLMs) exhibit remarkable performance across various NLP tasks. However, they often generate incorrect or hallucinated information, which hinders their practical applicability in real-world scenarios. Human feedback has been shown to effectively enhance the factuality and quality of generated content, addressing some of these limitations. However, this approach is resource-intensive, involving manual input and supervision, which can be time-consuming and expensive. Moreover, it cannot be provided during inference, further limiting its practical utility in dynamic and interactive applications. In this paper, we introduce ReFeed, a novel pipeline designed to enhance LLMs by providing automatic retrieval feedback in a plug-and-play framework without the need for expensive fine-tuning. ReFeed first generates initial outputs, then utilizes a retrieval model to acquire relevant information from large document collections, and finally incorporates the retrieved information into the in-context demonstration for output refinement, thereby addressing the limitations of LLMs in a more efficient and cost-effective manner. Experiments on four knowledge-intensive benchmark datasets demonstrate our proposed ReFeed could improve over +6.0% under zero-shot setting and +2.5% under few-shot setting, compared to baselines without using retrieval feedback.

Once language models (LMs) are deployed, they can interact with users long-term, ideally evolving continuously based on their feedback. Asking for direct user feedback can be disruptive; thus, we study harvesting user feedback from user-LM interaction logs. We study implicit user feedback in two user-LM interaction datasets (WildChat and LMSYS). First, we analyze user feedback in the user-LLM conversation trajectory, providing insights into when and why such feedback occurs. Second, we study harvesting learning signals from such implicit user feedback. We find that the contents of user feedback (e.g., user wanted clarification), not just the polarity (e.g., users were unhappy with the previous model response), can improve model performance in short human-designed questions (MTBench) but not on longer and more complex questions (WildBench). We also find that the usefulness of user feedback is largely tied to the quality of the user's initial prompt. Together, we provide an in-depth study of implicit user feedback, showing its potential and limitations.

We introduce SUPIR (Scaling-UP Image Restoration), a groundbreaking image restoration method that harnesses generative prior and the power of model scaling up. Leveraging multi-modal techniques and advanced generative prior, SUPIR marks a significant advance in intelligent and realistic image restoration. As a pivotal catalyst within SUPIR, model scaling dramatically enhances its capabilities and demonstrates new potential for image restoration. We collect a dataset comprising 20 million high-resolution, high-quality images for model training, each enriched with descriptive text annotations. SUPIR provides the capability to restore images guided by textual prompts, broadening its application scope and potential. Moreover, we introduce negative-quality prompts to further improve perceptual quality. We also develop a restoration-guided sampling method to suppress the fidelity issue encountered in generative-based restoration. Experiments demonstrate SUPIR's exceptional restoration effects and its novel capacity to manipulate restoration through textual prompts.

This work introduces the first framework for reconstructing surgical dialogue from unstructured real-world recordings, which is crucial for characterizing teaching tasks. In surgical training, the formative verbal feedback that trainers provide to trainees during live surgeries is crucial for ensuring safety, correcting behavior immediately, and facilitating long-term skill acquisition. However, analyzing and quantifying this feedback is challenging due to its unstructured and specialized nature. Automated systems are essential to manage these complexities at scale, allowing for the creation of structured datasets that enhance feedback analysis and improve surgical education. Our framework integrates voice activity detection, speaker diarization, and automated speech recaognition, with a novel enhancement that 1) removes hallucinations (non-existent utterances generated during speech recognition fueled by noise in the operating room) and 2) separates speech from trainers and trainees using few-shot voice samples. These aspects are vital for reconstructing accurate surgical dialogues and understanding the roles of operating room participants. Using data from 33 real-world surgeries, we demonstrated the system's capability to reconstruct surgical teaching dialogues and detect feedback instances effectively (F1 score of 0.79+/-0.07). Moreover, our hallucination removal step improves feedback detection performance by ~14%. Evaluation on downstream clinically relevant tasks of predicting Behavioral Adjustment of trainees and classifying Technical feedback, showed performances comparable to manual annotations with F1 scores of 0.82+/0.03 and 0.81+/0.03 respectively. These results highlight the effectiveness of our framework in supporting clinically relevant tasks and improving over manual methods.

This report reviews recent advancements in human motion prediction, reconstruction, and generation. Human motion prediction focuses on forecasting future poses and movements from historical data, addressing challenges like nonlinear dynamics, occlusions, and motion style variations. Reconstruction aims to recover accurate 3D human body movements from visual inputs, often leveraging transformer-based architectures, diffusion models, and physical consistency losses to handle noise and complex poses. Motion generation synthesizes realistic and diverse motions from action labels, textual descriptions, or environmental constraints, with applications in robotics, gaming, and virtual avatars. Additionally, text-to-motion generation and human-object interaction modeling have gained attention, enabling fine-grained and context-aware motion synthesis for augmented reality and robotics. This review highlights key methodologies, datasets, challenges, and future research directions driving progress in these fields.

Inverse materials design starts from target functionality and searches for structures that can realize it. Its value in closed-loop discovery depends not only on prediction performance, but also on whether expensive first-principles results are independently validated, provenance-recorded, and admitted as feedback only when evidence is sufficient. This is especially important for composite properties such as carrier mobility, where a final scalar value hides intermediate quantities, fit quality, convergence history, and workflow assumptions. Here we present InvDesMobility, a reliability-gated first-principles feedback framework that integrates multi-agent automated DFT, evidence stratification, generative structure proposal, acquisition ranking, and auditable release. Using 516 2DMatPedia-derived candidates, the workflow produced 280 QC-passed materials and 573 retained carrier-direction seed channels after channel-level reliability gating. These records were split into two feedback objects: relaxed structures updated the generative model, while retained mobility channels trained the acquisition model and set validation priority. Over multiple iterations, InvDesMobility screened 2.4 x 10^6 structures, submitted 102 candidates for DFT validation, and retained 86 reliability-gated generated channels across 41 formulas. Overall, the main contribution is not a fixed list of high-mobility materials, but a transferable feedback contract that makes closed-loop inverse design both useful and auditable when learning from expensive calculated properties. All source data, retained feedback records, and workflows are available at https://github.com/DreamLufei/invDesMobility, with an accompanying evidence website at https://dreamlufei.github.io/invDesMobility/.

Large Language Models (LLMs) have shown remarkable aptitude in code generation but still struggle on challenging programming tasks. Self-repair -- in which the model debugs and fixes mistakes in its own code -- has recently become a popular way to boost performance in these settings. However, only very limited studies on how and when self-repair works effectively exist in the literature, and one might wonder to what extent a model is really capable of providing accurate feedback on why the code is wrong when that code was generated by the same model. In this paper, we analyze GPT-3.5 and GPT-4's ability to perform self-repair on APPS, a challenging dataset consisting of diverse coding challenges. To do so, we first establish a new evaluation strategy dubbed pass@t that measures the pass rate of the tasks against the total number of tokens sampled from the model, enabling a fair comparison to purely sampling-based approaches. With this evaluation strategy, we find that the effectiveness of self-repair is only seen in GPT-4. We also observe that self-repair is bottlenecked by the feedback stage; using GPT-4 to give feedback on the programs generated by GPT-3.5 and using expert human programmers to give feedback on the programs generated by GPT-4, we unlock significant performance gains.

In an era where visual content generation is increasingly driven by machine learning, the integration of human feedback into generative models presents significant opportunities for enhancing user experience and output quality. This study explores strategies for incorporating iterative human feedback into the generative process of diffusion-based text-to-image models. We propose FABRIC, a training-free approach applicable to a wide range of popular diffusion models, which exploits the self-attention layer present in the most widely used architectures to condition the diffusion process on a set of feedback images. To ensure a rigorous assessment of our approach, we introduce a comprehensive evaluation methodology, offering a robust mechanism to quantify the performance of generative visual models that integrate human feedback. We show that generation results improve over multiple rounds of iterative feedback through exhaustive analysis, implicitly optimizing arbitrary user preferences. The potential applications of these findings extend to fields such as personalized content creation and customization.

Sampling latency compounds in diffusion workflows, where users generate and discard many candidates before keeping one. Surprisingly, the poor outputs of standard few-step samplers do not reflect a lack of reconstruction capacity: by optimizing only the initial noise, frozen 3-4-step samplers can closely reproduce their corresponding full-step outputs. Building on this finding, we learn corrections to the initial noise and denoising updates using endpoint supervision, improving correspondence with full-step outputs generated from the same noise and prompt. The resulting previews allow users to screen candidates cheaply and reserve full-step generation for promising ones. Input correction also transfers across sampling budgets without retraining. Experiments show substantial improvements in reference fidelity, including 53-78% lower reconstruction MSE than retrained LD3 on unconditional benchmarks, alongside improved ranking preservation and candidate selection on SD1.5, SDXL, and FLUX.1-dev.

Intelligent document processing pipelines extract structured entities (tables, images, and text) from documents for use in downstream systems such as knowledge bases, retrieval-augmented generation, and analytics. A persistent limitation of existing pipelines is that extraction output is produced without any intrinsic mechanism to verify whether it faithfully represents the source. Model-internal confidence scores measure inference certainty, not correspondence to the document, and extraction errors pass silently into downstream consumers. We present Reconstruction as Validation (RaV-IDP), a document processing pipeline that introduces reconstruction as a first-class architectural component. After each entity is extracted, a dedicated reconstructor renders the extracted representation back into a form comparable to the original document region, and a comparator scores fidelity between the reconstruction and the unmodified source crop. This fidelity score is a grounded, label-free quality signal. When fidelity falls below a per-entity-type threshold, a structured GPT-4.1 vision fallback is triggered and the validation loop repeats. We enforce a bootstrap constraint: the comparator always anchors against the original document region, never against the extraction, preventing the validation from becoming circular. We further propose a per-stage evaluation framework pairing each pipeline component with an appropriate benchmark. The code pipeline is publicly available at https://github.com/pritesh-2711/RaV-IDP for experimentation and use.

Vision-language models (VLMs) have shown strong capabilities in generating visualization code from textual or visual specifications. However, real-world visualization authoring is inherently iterative: users frequently revise existing visualizations to repair flawed charts or adapt them to desired styles. Existing benchmarks primarily evaluate generation from scratch, leaving visualization code editing from multimodal feedback largely unexplored. We introduce VisEditBench, a benchmark of 1,395 human-annotated visualization code-editing tasks grounded in realistic visualization workflows and failure cases. VisEditBench covers two practical settings: feedback-guided repair, where models revise visualization code using buggy or marked charts together with textual feedback, and reference-guided restyling, where models modify code to match a target chart image. Evaluating 20 state-of-the-art VLMs reveals that visualization code editing remains challenging: Claude-4.6-Sonnet achieves the best overall pass rate of 74.46%, while most open-source models remain below 50%. Performance is particularly weak on visually grounded style adaptation, where Claude-4.6-Sonnet achieves only 55.71%. To establish a strong baseline, we further propose VisEditAgent, a render-grounded editing framework that iteratively generates, executes, validates, and refines candidate edits. Built on GPT-4o, VisEditAgent improves overall pass rate from 55.75% to 67.99%, demonstrating the importance of render-grounded feedback for faithful visualization editing. We will release VisEditBench at https://github.com/vis-nlp/VisEditBench.

3D reconstruction techniques have widely been used for digital documentation of archaeological fragments. However, efficient digital capture of fragments remains as a challenge. In this work, we aim to develop a portable, high-throughput, and accurate reconstruction system for efficient digitization of fragments excavated in archaeological sites. To realize high-throughput digitization of large numbers of objects, an effective strategy is to perform scanning and reconstruction in batches. However, effective batch-based scanning and reconstruction face two key challenges: 1) how to correlate partial scans of the same object from multiple batch scans, and 2) how to register and reconstruct complete models from partial scans that exhibit only small overlaps. To tackle these two challenges, we develop a new batch-based matching algorithm that pairs the front and back sides of the fragments, and a new Bilateral Boundary ICP algorithm that can register partial scans sharing very narrow overlapping regions. Extensive validation in labs and testing in excavation sites demonstrate that these designs enable efficient batch-based scanning for fragments. We show that such a batch-based scanning and reconstruction pipeline can have immediate applications on digitizing sherds in archaeological excavations. Our project page: https://jiepengwang.github.io/FIRES/.

In this paper, we introduce an insightful paradigm through the Auto-Encoder lens-understanding as the encoder (I2T) that compresses images into text, and generation as the decoder (T2I) that reconstructs images from that text. Using reconstruction fidelity as the unified training objective, we enforce the coherent bidirectional information flow between the understanding and generation processes, bringing mutual gains. To implement this, we propose UAE, a novel framework for unified multimodal learning. We begin by pre-training the decoder with large-scale long-context image captions to capture fine-grained semantic and complex spatial relationships. We then propose Unified-GRPO via reinforcement learning (RL), which covers three stages: (1) A cold-start phase to gently initialize both encoder and decoder with a semantic reconstruction loss; (2) Generation for Understanding, where the encoder is trained to generate informative captions that maximize the decoder's reconstruction quality, enhancing its visual understanding; (3) Understanding for Generation, where the decoder is refined to reconstruct from these captions, forcing it to leverage every detail and improving its long-context instruction following and generation fidelity. For evaluation, we introduce Unified-Bench, the first benchmark tailored to assess the degree of unification of the UMMs. A surprising "aha moment" arises within the multimodal learning domain: as RL progresses, the encoder autonomously produces more descriptive captions, while the decoder simultaneously demonstrates a profound ability to understand these intricate descriptions, resulting in reconstructions of striking fidelity.

Retrieval-Augmented Generation (RAG) improves the factual accuracy of large language model (LLM) outputs by grounding generation in external knowledge. Recent agentic RAG systems extend this paradigm with critical agents to evaluate model responses and iteratively refine outputs. However, most prior work implicitly assumes reliable critic feedback and focuses on planning strategies, while paying limited attention to the robustness of the error-correction process itself, which can be impacted by misaligned error categories and ineffective or incorrect corrections. Here, we hypothesize that RAG performance can be improved without explicit error categorization. We propose RePAIR, a response-action learning paradigm that directly maps flawed RAG outputs to error-mitigating action plans without relying on fine-grained error taxonomies and explicit critic supervision. Across multiple benchmarks, RePAIR consistently improves agentic RAG performance.

The proliferation of neural radiance field (NeRF) research requires significant efforts to reimplement papers before building upon them. We introduce NERFIFY, a multi-agent framework that reliably converts NeRF research papers into trainable Nerfstudio plugins, in contrast to generic paper-to-code methods and frontier models like GPT-5 that usually fail to produce runnable code. NERFIFY achieves domain-specific executability through six key innovations: (1) Context-free grammar (CFG): LLM synthesis is constrained by Nerfstudio formalized as a CFG, ensuring generated code satisfies architectural invariants. (2) Graph-of-Thought code synthesis: Specialized multi-file-agents generate repositories in topological dependency order, validating contracts and errors at each node. (3) Compositional citation recovery: Agents automatically retrieve and integrate components (samplers, encoders, proposal networks) from citation graphs of references. (4) Visual feedback: Artifacts are diagnosed through PSNR-minima ROI analysis, cross-view geometric validation, and VLM-guided patching to iteratively improve quality. (5) Knowledge enhancement: Beyond reproduction, methods can be improved with novel optimizations. (6) Benchmarking: An evaluation framework is designed for NeRF paper-to-code synthesis across 30 diverse papers. On papers without public implementations, NERFIFY achieves visual quality matching expert human code (+/-0.5 dB PSNR, +/-0.2 SSIM) while reducing implementation time from weeks to minutes. NERFIFY demonstrates that a domain-aware design enables code translation for complex vision papers, potentiating accelerated and democratized reproducible research. Code, data and implementations will be publicly released.

Unified multimodal models can both look at and render images, so in principle they can repair their own generations: diagnose what an image gets wrong, revise it, observe the result, and diagnose again. Whether a revision helps is known only after it is rendered, so the reflection text and the image generation must be learned jointly, over the whole loop. Supervised fine-tuning (SFT) on reflection trajectories gives a cold start but does not find the high-success repair paths, and naive RL that optimizes only the renderer or only one head leaves most of the gain untapped. We introduce UMM-Reflection, which applies reinforcement learning (RL) to complete reflection trajectories inside one unified model: sibling trajectories share one initial image, so the group-relative advantage compares reflection strategies, and one trajectory-level advantage updates both the reflection tokens and the flow-based revisions, avoiding the combinatorial blow-up of per-round credit assignment. Unlike single-round editing or pipelines with an external critic, credit flows across rounds and to both roles of the same model, and no verifier is needed at inference. On BAGEL, UMM-Reflection improves GenEval by 12.05 points over SFT, and the gains transfer to WISE (+10.97), OneIG-Bench (+3.48), and T2I-CompBench++ (+4.63), none of which is used in training.

The promotion of academic papers has become an important means of enhancing research visibility. However, existing automated methods struggle limited storytelling, insufficient aesthetic quality, and constrained self-adjustment, making it difficult to achieve efficient and engaging dissemination. At the heart of those challenges is a simple principle: there is no way to improve it when you cannot evaluate it right. To address this, we introduce EvoPresent, a self-improvement agent framework that unifies coherent narratives, aesthetic-aware designs, and realistic presentation delivery via virtual characters. Central to EvoPresent is PresAesth, a multi-task reinforcement learning (RL) aesthetic model that provides reliable aesthetic scoring, defect adjustment, and comparative feedback, enabling iterative self-improvement even under limited aesthetic training data. To systematically evaluate the methods, we introduce EvoPresent Benchmark, a comprehensive benchmark comprising: Presentation Generation Quality, built on 650 top-tier AI conference papers with multimodal resources (slides, videos and scripts) to assess both content and design; and Aesthetic Awareness, consisting of 2,000 slide pairs with varying aesthetic levels, supporting joint training and evaluation on scoring, defect adjustment, and comparison. Our findings highlight that (i) High-quality feedback is essential for agent self-improvement, while initial capability alone does not guarantee effective self-correction. (ii) Automated generation pipelines exhibit a trade-off between visual design and content construction. (iii) Multi-task RL training shows stronger generalization in aesthetic awareness tasks.

Objects in post-fire environments often undergo irreversible physical transformations that change their geometry, material state, and visual appearance. Detecting and identifying these remnants is critical for locating hazards, reconstructing pre-incident contents, and inventorying losses. Unlike standard image corruptions, these degradations affect the physical structure of the object itself. To study this setting, we introduce TRACE, a transformation-aware benchmark for post-fire object understanding. TRACE contains 21.4K real-image-grounded synthetic scenes and paired object-level pristine-to-degraded progressions spanning 499 object identities across 189 categories. We define five tasks targeting localization and pre-degradation understanding: degraded-object detection, pristine-state recovery and retrieval, original material recovery, pristine description generation, and functional reasoning. Existing models degrade sharply with severity. From the least to the most severe level, RF-DETR mAP decreases by 71% relative, while InternVL3.5 retrieval R@1 falls from 93.85 to 28.11. To address this, we propose the Feature Recovery Module (FRM), a plug-and-play module that maps degraded encoder features to pristine-aligned representations while keeping the host frozen. Trained only with paired feature supervision, FRM improves scene-level detection, CLIP/SigLIP2 feature recovery, and all four object-level VLM tasks, with larger gains under more severe degradation. Across VLM hosts and severity levels, relative gains average 12.5% for retrieval, 20.1% for material recovery, 13.2% for description generation, and 12.4% for functional reasoning.

Retrieval-enhanced methods have become a primary approach in fact verification (FV); it requires reasoning over multiple retrieved pieces of evidence to verify the integrity of a claim. To retrieve evidence, existing work often employs off-the-shelf retrieval models whose design is based on the probability ranking principle. We argue that, rather than relevance, for FV we need to focus on the utility that a claim verifier derives from the retrieved evidence. We introduce the feedback-based evidence retriever(FER) that optimizes the evidence retrieval process by incorporating feedback from the claim verifier. As a feedback signal we use the divergence in utility between how effectively the verifier utilizes the retrieved evidence and the ground-truth evidence to produce the final claim label. Empirical studies demonstrate the superiority of FER over prevailing baselines.

Execution feedback can guide coding agents toward correct repository repairs, but only when the tests capture the behavior requested by the issue. Agent-generated tests can encode incomplete or incorrect behavioral targets; when the same trajectory writes both the patch and the test, their errors can agree and create false confidence. We introduce ExecCritic, combining a test--verify--revise scaffold with a role-specific reinforcement learning recipe for training agents within it. The scaffold separates test construction from source-code repair: a Test agent independently generates repository-native tests, a fail-closed harness qualifies and freezes them, and a Repair agent revises source code from their execution feedback without changing the tests. Both roles use Qwen-3.5-35B-A3B as the backbone and are trained separately. In Learn to Test, the Test agent learns to produce behaviorally valid tests that distinguish correct from incorrect patches. In Test to Improve, the Repair agent learns both direct task resolution and feedback-guided revision. On SWE-bench Verified, test quality determines whether feedback helps: holding the base Repair agent fixed, tests from the base Test agent reduce resolved rate from a no-test baseline of 61.2% to 57.3%, whereas tests from GPT-5.6-sol raise it to 65.3%. Role-specific post-training raises the Qwen Test agent's Base-to-Gold success from 22.2% to 62.2%; composing the two post-trained Qwen agents reaches 72.6%, an 11.4-point gain over the original no-test baseline without stronger-model or Oracle feedback at evaluation time. Code is publicly available at https://github.com/MSR-Orchard/execcritic.

Text-to-image generative models have made significant advancements in recent years; however, accurately capturing intricate details in textual prompts, such as entity missing, attribute binding errors, and incorrect relationships remains a formidable challenge. In response, we present an innovative, training-free method that directly addresses these challenges by incorporating tailored objectives to account for textual constraints. Unlike layout-based approaches that enforce rigid structures and limit diversity, our proposed approach offers a more flexible arrangement of the scene by imposing just the extracted constraints from the text, without any unnecessary additions. These constraints are formulated as losses-entity missing, entity mixing, attribute binding, and spatial relationships, integrated into a unified loss that is applied in the first generation stage. Furthermore, we introduce a feedback-driven system for fine-grained initial noise refinement. This system integrates a verifier that evaluates the generated image, identifies inconsistencies, and provides corrective feedback. Leveraging this feedback, our refinement method first targets the unmet constraints by refining the faulty attention maps caused by initial noise, through the optimization of selective losses associated with these constraints. Subsequently, our unified loss function is reapplied to proceed the second generation phase. Experimental results demonstrate that our method, relying solely on our proposed objective functions, significantly enhances compositionality, achieving a 24% improvement in human evaluation and a 25% gain in spatial relationships. Furthermore, our fine-grained noise refinement proves effective, boosting performance by up to 5%. Code is available at https://github.com/hadi-hosseini/noise-refinement.

In episodic memory with natural language queries (EM-NLQ), a user may ask a question (e.g., "Where did I place the mug?") that requires searching a long egocentric video, captured from the user's perspective, to find the moment that answers it. However, queries can be ambiguous or incomplete, leading to incorrect responses. Current methods ignore this key aspect and address EM-NLQ in a one-shot setup, limiting their applicability in real-world scenarios. In this work, we address this gap and introduce the Episodic Memory with Questions and Feedback task (EM-QnF). Here, the user can provide feedback on the model's initial prediction or add more information (e.g., "Before this. I'm looking for the big blue mug not the white one"), helping the model refine its predictions interactively. To this end, we collect datasets for feedback-based interaction and propose a lightweight training scheme that avoids expensive sequential optimization. We also introduce a plug-and-play Feedback ALignment Module (FALM) that enables existing EM-NLQ models to incorporate user feedback effectively. Our approach significantly improves over the state of the art on three challenging benchmarks and is better than or competitive with commercial large vision-language models while remaining efficient. Evaluation with human-generated feedback shows that it generalizes well to real-world scenarios.

We consider the problem of reconstructing a full 360{\deg} photographic model of an object from a single image of it. We do so by fitting a neural radiance field to the image, but find this problem to be severely ill-posed. We thus take an off-the-self conditional image generator based on diffusion and engineer a prompt that encourages it to "dream up" novel views of the object. Using an approach inspired by DreamFields and DreamFusion, we fuse the given input view, the conditional prior, and other regularizers in a final, consistent reconstruction. We demonstrate state-of-the-art reconstruction results on benchmark images when compared to prior methods for monocular 3D reconstruction of objects. Qualitatively, our reconstructions provide a faithful match of the input view and a plausible extrapolation of its appearance and 3D shape, including to the side of the object not visible in the image.

Long-form question answering (LFQA) aims to provide thorough and in-depth answers to complex questions, enhancing comprehension. However, such detailed responses are prone to hallucinations and factual inconsistencies, challenging their faithful evaluation. This work introduces HaluQuestQA, the first hallucination dataset with localized error annotations for human-written and model-generated LFQA answers. HaluQuestQA comprises 698 QA pairs with 4.7k span-level error annotations for five different error types by expert annotators, along with preference judgments. Using our collected data, we thoroughly analyze the shortcomings of long-form answers and find that they lack comprehensiveness and provide unhelpful references. We train an automatic feedback model on this dataset that predicts error spans with incomplete information and provides associated explanations. Finally, we propose a prompt-based approach, Error-informed refinement, that uses signals from the learned feedback model to refine generated answers, which we show reduces hallucination and improves answer quality. Furthermore, humans find answers generated by our approach comprehensive and highly prefer them (84%) over the baseline answers.

In this paper, we present a system to restore analog videos of historical archives. These videos often contain severe visual degradation due to the deterioration of their tape supports that require costly and slow manual interventions to recover the original content. The proposed system uses a multi-frame approach and is able to deal with severe tape mistracking, which results in completely scrambled frames. Tests on real-world videos from a major historical video archive show the effectiveness of our demo system. The code and the pre-trained model are publicly available at https://github.com/miccunifi/analog-video-restoration.

Today's robot policies exhibit subpar performance when faced with the challenge of generalizing to novel environments. Human corrective feedback is a crucial form of guidance to enable such generalization. However, adapting to and learning from online human corrections is a non-trivial endeavor: not only do robots need to remember human feedback over time to retrieve the right information in new settings and reduce the intervention rate, but also they would need to be able to respond to feedback that can be arbitrary corrections about high-level human preferences to low-level adjustments to skill parameters. In this work, we present Distillation and Retrieval of Online Corrections (DROC), a large language model (LLM)-based system that can respond to arbitrary forms of language feedback, distill generalizable knowledge from corrections, and retrieve relevant past experiences based on textual and visual similarity for improving performance in novel settings. DROC is able to respond to a sequence of online language corrections that address failures in both high-level task plans and low-level skill primitives. We demonstrate that DROC effectively distills the relevant information from the sequence of online corrections in a knowledge base and retrieves that knowledge in settings with new task or object instances. DROC outperforms other techniques that directly generate robot code via LLMs by using only half of the total number of corrections needed in the first round and requires little to no corrections after two iterations. We show further results, videos, prompts and code on https://sites.google.com/stanford.edu/droc .

Outcome-supervised search agents learn when and how to retrieve evidence, but terminal rewards neither localize intermediate errors nor redirect an ongoing trajectory before those errors compound. Treating corrective feedback as a learned in-trajectory intervention couples the two roles: the agent must decide when to request and use feedback, while the critic must infer useful corrections from outcome-confounded rollouts whose failure patterns shift as the agent improves. We introduce CAFE (Coupled Agent--Feedback Evolution), a framework in which a shared-parameter model alternates between search-agent and critic roles. CAFE initializes feedback-conditioned recovery from trajectories built around the base agent's own failures, then couples online and offline optimization. During online RL, a comparative feedback estimate uses a prompt-level call--skip success gap to shape request returns, while feedback-aware advantage shaping reweights token advantages before and after feedback. Offline, rollout-derived preference optimization learns feedback from matched successful and unsuccessful trajectories. On seven agentic search benchmarks, CAFE outperforms the evaluated RL-based search agents on average, retains its gains across all six out-of-domain benchmarks, and reduces answer-level hallucinations. One-sided ablations show that improving only the agent or only the critic eventually plateaus, whereas alternating the two updates continues to improve performance. These findings suggest that a self-improving search agent needs feedback that co-evolves with the policy it guides.

Existing methods for multimodal sentiment analysis (MSA) under missing modalities usually follow a repair-first paradigm. We revisit this assumption and ask: should every missing modality be repaired? A per-sample oracle analysis shows the answer is not always: full-modality input is optimal for only a small fraction of samples, and every modality subset is preferred by some samples. These results suggest that adding or repairing modalities may not always improve prediction, and that the utility of each modality is sample-dependent. Building on this finding, we propose Sufficiency-Informed Evidential ValvE (SIEVE) that turns ``whether to repair'' into an explicit, learnable decision at the sample level. SIEVE compares a direct prediction branch with a repair branch, derives an empirical sufficiency signal from their per-sample loss gap, and routes each input through an evidential gate that jointly models sufficiency and its epistemic uncertainty. SIEVE is repair-agnostic: it operates as a plug-and-play decision on top of any explicit or implicit repair module, without modifying its internal design. Experiments on CMU-MOSI and IEMOCAP show that SIEVE consistently improves representative repair backbones across evaluated missing rates, and approaches the per-sample dual-branch achievable optimum.

Test-time training (TTT) lets a model store information in its weights during inference. When the model learns from its own output, however, each update also changes the model that generates the next training example. Across 128K-token streams, retaining generated-text updates worsens prediction on independent human-written text with three TTT-E2E model configurations (labeled 125M, 760M, and 3B). The same failure occurs when Adam updates Qwen3-4B's existing weights. The same update mechanisms can improve on real text, so writing itself is not the failure. Three matched comparisons trace the causal pathway. Fixed Generation removes over 98% of the damage at 125M and 760M by using a frozen model to generate training chunks. Recorded Replay separates the loss caused by reading degraded text from the additional loss stored by updating on it. A paired one-update comparison then shows the local conflict: an update predicts its source better but new real text worse. This cost grows after Closed Loop adaptation, with a few trajectories accounting for most large failures. Finally, Settlement evaluates the candidate state on independent real text before commitment. It leaves mean endpoint gaps of 0.07 and -0.02 nats at 125M and 760M while retaining real-text adaptation. These results motivate checking prediction on independent evidence before retaining an update.

Deep generative models produce data according to a learned representation, e.g. diffusion models, through a process of approximation computing possible samples. Approximation can be understood as reconstruction and the large datasets used to train models as sets of records in which we represent the physical world with some data structure (photographs, audio recordings, manuscripts). During the process of reconstruction, e.g., image frames develop each timestep towards a textual input description. While moving forward in time, frame sets are shaped according to learned bias and their production, we argue here, can be considered as going back in time; not by inspiration on the backward diffusion process but acknowledging culture is specifically marked in the records. Futures of generative modelling, namely in film and audiovisual arts, can benefit by dealing with diffusion systems as a process to compute the future by inevitably being tied to the past, if acknowledging the records as to capture fields of view at a specific time, and to correlate with our own finite memory ideals. Models generating new data distributions can target video production as signal processors and by developing sequences through timelines we ourselves also go back to decade-old algorithmic and multi-track methodologies revealing the actual predictive failure of contemporary approaches to synthesis in moving image, both as relevant to composition and not explanatory.

Image restoration (IR) seeks to recover high-quality images from degraded observations caused by a wide range of factors, including noise, blur, compression, and adverse weather. While traditional IR methods have made notable progress by targeting individual degradation types, their specialization often comes at the cost of generalization, leaving them ill-equipped to handle the multifaceted distortions encountered in real-world applications. In response to this challenge, the all-in-one image restoration (AiOIR) paradigm has recently emerged, offering a unified framework that adeptly addresses multiple degradation types. These innovative models enhance the convenience and versatility by adaptively learning degradation-specific features while simultaneously leveraging shared knowledge across diverse corruptions. In this survey, we provide the first in-depth and systematic overview of AiOIR, delivering a structured taxonomy that categorizes existing methods by architectural designs, learning paradigms, and their core innovations. We systematically categorize current approaches and assess the challenges these models encounter, outlining research directions to propel this rapidly evolving field. To facilitate the evaluation of existing methods, we also consolidate widely-used datasets, evaluation protocols, and implementation practices, and compare and summarize the most advanced open-source models. As the first comprehensive review dedicated to AiOIR, this paper aims to map the conceptual landscape, synthesize prevailing techniques, and ignite further exploration toward more intelligent, unified, and adaptable visual restoration systems. A curated code repository is available at https://github.com/Harbinzzy/All-in-One-Image-Restoration-Survey.

When an AI agent calls an API and hits a validation error, it needs more than what went wrong -- it needs what to do next. A self-reflective API returns, on validation failure, a machine-readable recovery\_feedback.suggestions[] payload sufficient for the agent to repair the request and retry without external reasoning. On a leak-audited pilot (N{=}30 per cell, 3 LLMs, 10 adversarial tasks), structured suggestions lift task-completion rate by +36.7--40.0pp over plain-English diagnoses on Anthropic models (Fisher's exact p le 0.0022), at 1.8--2.2times better per-success token efficiency. The lift is not significant on gpt-4o-mini (p{=}0.435); a second-domain replication on a billing API confirms the pattern. The comparison only holds after auditing two undocumented classes of answer leakage in LLM benchmarks. We shipaudit\_prompt\_leakage.py as reusable CI infrastructure. Code and data: https://github.com/arquicanedo/self-reflective-apis.

Continual learning aims to acquire tasks sequentially without catastrophic forgetting, yet standard strategies face a core tradeoff: regularization-based methods (e.g., EWC) can overconstrain updates when task optima are weakly overlapping, while replay-based methods can retain performance but drift due to imperfect replay. We study a hybrid perspective: trust region continual learning that combines generative replay with a Fisher-metric trust region constraint. We show that, under local approximations, the resulting update admits a MAML-style interpretation with a single implicit inner step: replay supplies an old-task gradient signal (query-like), while the Fisher-weighted penalty provides an efficient offline curvature shaping (support-like). This yields an emergent meta-learning property in continual learning: the model becomes an initialization that rapidly re-converges to prior task optima after each task transition, without explicitly optimizing a bilevel objective. Empirically, on task-incremental diffusion image generation and continual diffusion-policy control, trust region continual learning achieves the best final performance and retention, and consistently recovers early-task performance faster than EWC, replay, and continual meta-learning baselines.

Most existing image restoration methods use neural networks to learn strong image-level priors from huge data to estimate the lost information. However, these works still struggle in cases when images have severe information deficits. Introducing external priors or using reference images to provide information also have limitations in the application domain. In contrast, text input is more readily available and provides information with higher flexibility. In this work, we design an effective framework that allows the user to control the restoration process of degraded images with text descriptions. We use the text-image feature compatibility of the CLIP to alleviate the difficulty of fusing text and image features. Our framework can be used for various image restoration tasks, including image inpainting, image super-resolution, and image colorization. Extensive experiments demonstrate the effectiveness of our method.

In the context of long-term video understanding with large multimodal models, many frameworks have been proposed. Although transformer-based visual compressors and memory-augmented approaches are often used to process long videos, they usually compress each frame independently and therefore fail to achieve strong performance on tasks that require understanding complete events, such as temporal ordering tasks in MLVU and VNBench. This motivates us to rethink the conventional one-way scheme from perception to memory, and instead establish a feedbackdriven process in which past visual contexts stored in the context memory can benefit ongoing perception. To this end, we propose Question-guided Visual Compression with Memory Feedback (QViC-MF), a framework for long-term video understanding. At its core is a Question-guided Multimodal Selective Attention (QMSA), which learns to preserve visual information related to the given question from both the current clip and the past related frames from the memory. The compressor and memory feedback work iteratively for each clip of the entire video. This simple yet effective design yields large performance gains on longterm video understanding tasks. Extensive experiments show that our method achieves significant improvement over current state-of-the-art methods by 6.1% on MLVU test, 8.3% on LVBench, 18.3% on VNBench Long, and 3.7% on VideoMME Long. The code will be released publicly.

Pseudo-relevance feedback (PRF) has proven to be an effective query reformulation technique to improve retrieval accuracy. It aims to alleviate the mismatch of linguistic expressions between a query and its potential relevant documents. Existing PRF methods independently treat revised queries originating from the same query but using different numbers of feedback documents, resulting in severe query drift. Without comparing the effects of two different revisions from the same query, a PRF model may incorrectly focus on the additional irrelevant information increased in the more feedback, and thus reformulate a query that is less effective than the revision using the less feedback. Ideally, if a PRF model can distinguish between irrelevant and relevant information in the feedback, the more feedback documents there are, the better the revised query will be. To bridge this gap, we propose the Loss-over-Loss (LoL) framework to compare the reformulation losses between different revisions of the same query during training. Concretely, we revise an original query multiple times in parallel using different amounts of feedback and compute their reformulation losses. Then, we introduce an additional regularization loss on these reformulation losses to penalize revisions that use more feedback but gain larger losses. With such comparative regularization, the PRF model is expected to learn to suppress the extra increased irrelevant information by comparing the effects of different revised queries. Further, we present a differentiable query reformulation method to implement this framework. This method revises queries in the vector space and directly optimizes the retrieval performance of query vectors, applicable for both sparse and dense retrieval models. Empirical evaluation demonstrates the effectiveness and robustness of our method for two typical sparse and dense retrieval models.

Preserving cultural heritage is of paramount importance. In the domain of art restoration, developing a computer vision model capable of effectively restoring deteriorated images of art pieces was difficult, but now we have a good computer vision state-of-art. Traditional restoration methods are often time-consuming and require extensive expertise. The aim of this work is to design an automated solution based on computer vision models that can enhance and reconstruct degraded artworks, improving their visual quality while preserving their original characteristics and artifacts. The model should handle a diverse range of deterioration types, including but not limited to noise, blur, scratches, fading, and other common forms of degradation. We adapt the current state-of-art for the image super-resolution based on the Diffusion Model (DM) and fine-tune it for Image art restoration. Our results show that instead of fine-tunning multiple different models for different kinds of degradation, fine-tuning one super-resolution. We train it on multiple datasets to make it robust. code link: https://github.com/Naagar/art_restoration_DM

Decompositional reconstruction of 3D scenes, with complete shapes and detailed texture of all objects within, is intriguing for downstream applications but remains challenging, particularly with sparse views as input. Recent approaches incorporate semantic or geometric regularization to address this issue, but they suffer significant degradation in underconstrained areas and fail to recover occluded regions. We argue that the key to solving this problem lies in supplementing missing information for these areas. To this end, we propose DP-Recon, which employs diffusion priors in the form of Score Distillation Sampling (SDS) to optimize the neural representation of each individual object under novel views. This provides additional information for the underconstrained areas, but directly incorporating diffusion prior raises potential conflicts between the reconstruction and generative guidance. Therefore, we further introduce a visibility-guided approach to dynamically adjust the per-pixel SDS loss weights. Together these components enhance both geometry and appearance recovery while remaining faithful to input images. Extensive experiments across Replica and ScanNet++ demonstrate that our method significantly outperforms SOTA methods. Notably, it achieves better object reconstruction under 10 views than the baselines under 100 views. Our method enables seamless text-based editing for geometry and appearance through SDS optimization and produces decomposed object meshes with detailed UV maps that support photorealistic Visual effects (VFX) editing. The project page is available at https://dp-recon.github.io/.

Natural-language autoencoders score explanations of hidden activations by reconstruction: an explanation is deemed faithful if the activation can be regenerated from it. The test is structurally insensitive to individual false claims: if flipping a claim does not change the reconstruction, the claim is never penalized. We show the test is passed in two ways, neither faithful. On a released Qwen-2.5-7B verbalizer, explanations reconstruct well above chance while ~2% of specific claims are reconstruction-dependent, so the score tracks gist, not specific facts. Under exact synthetic ground truth, the standard recipe develops co-adapted private codes (false wording the reconstruction depends on) in 5/5 runs, and fixes that leave the target model unchanged do not help. We contribute two audit protocols, the grounded-vs-true cross and the evaluator swap, and RECAP (Readable Encodings via Co-trained Auxiliary Predictors): linear heads trained alongside the target model to keep designated content decodable. On RECAP-trained sandbox models, fresh verbalizers state the designated content truly and the codes vanish, at a +0.001-nat cost. This replicates on a pretrained Pythia-160M: the content becomes reliably probe-decodable, though a fresh verbalizer conveys it only in part (truth 0.44-0.46 vs a near-zero control). For interpretability, high reconstruction does not certify individual claims. For AI safety, RECAP makes designated internal content independently checkable against probes rather than asserted by prose a model can game: an independent probe scores the verbalizer's true claims above its false ones (AUC 0.96, vs 0.82 without RECAP). Against an adversary that edits an explanation to maximize the reconstruction score while lying (suppressing ~87% of its lie penalty), the RECAP probe still flags the lies (AUC 0.95) while the control probe collapses to chance (0.51).

This work addresses the problem of recovering complete, simulatable object geometry from reconstructed real-world scenes, enabling physics-based interaction with objects embedded in the scene. While modern multi-view reconstruction methods can produce visually accurate environments, objects are often incomplete due to occlusions and limited observations, making them unsuitable for physics simulation. To address this limitation, we propose SAM3D-Phys, a framework that integrates scene reconstruction with generative 3D priors of SAM3D to recover physically simulatable objects. Our approach first reconstructs the scene from multi-view images to obtain scene geometry and partial observations of objects. We then leverage SAM3D to infer complete object geometry from these partial observations. To ensure that the recovered objects remain consistent with the reconstructed scene, we restore scene-consistent object states through two complementary strategies: a physics-constrained spatial optimization algorithm that iteratively aligns the recovered object to its original location, and a mask-guided appearance distillation module that refines texture fidelity based on the observed images. By recovering complete object geometry and restoring its pose and appearance within the scene, SAM3D-Phys produces clean object representations suitable for physics-based simulation, enabling simultaneous and physically consistent interactive simulation of multiple objects within a reconstructed scene. Project page: https://chnxindong.github.io/sam3d-phys/

Recent studies have shown LLMs possess some ability to improve their responses when given external feedback. However, it remains unclear how effectively and thoroughly these models can incorporate extrinsic feedback. In an ideal scenario, if LLMs receive near-perfect and complete feedback, we would expect them to fully integrate the feedback and change their incorrect answers to correct ones. In this paper, we systematically investigate LLMs' ability to incorporate feedback by designing a controlled experimental environment. For each problem, a solver model attempts a solution, then a feedback generator with access to near-complete ground-truth answers produces targeted feedback, after which the solver tries again. We evaluate this pipeline across a diverse range of tasks, including math reasoning, knowledge reasoning, scientific reasoning, and general multi-domain evaluations with state-of-the-art language models including Claude 3.7 (with and without extended thinking). Surprisingly, even under these near-ideal conditions, solver models consistently show resistance to feedback, a limitation that we term FEEDBACK FRICTION. To mitigate this limitation, we experiment with sampling-based strategies like progressive temperature increases and explicit rejection of previously attempted incorrect answers, which yield improvements but still fail to help models achieve target performance. We also perform a rigorous exploration of potential causes of FEEDBACK FRICTION, ruling out factors such as model overconfidence and data familiarity. We hope that highlighting this issue in LLMs and ruling out several apparent causes will help future research in self-improvement.

We propose an image restoration algorithm that can control the perceptual quality and/or the mean square error (MSE) of any pre-trained model, trading one over the other at test time. Our algorithm is few-shot: Given about a dozen images restored by the model, it can significantly improve the perceptual quality and/or the MSE of the model for newly restored images without further training. Our approach is motivated by a recent theoretical result that links between the minimum MSE (MMSE) predictor and the predictor that minimizes the MSE under a perfect perceptual quality constraint. Specifically, it has been shown that the latter can be obtained by optimally transporting the output of the former, such that its distribution matches the source data. Thus, to improve the perceptual quality of a predictor that was originally trained to minimize MSE, we approximate the optimal transport by a linear transformation in the latent space of a variational auto-encoder, which we compute in closed-form using empirical means and covariances. Going beyond the theory, we find that applying the same procedure on models that were initially trained to achieve high perceptual quality, typically improves their perceptual quality even further. And by interpolating the results with the original output of the model, we can improve their MSE on the expense of perceptual quality. We illustrate our method on a variety of degradations applied to general content images of arbitrary dimensions.

Despite the significant progress in diffusion prior-based image restoration, most existing methods apply uniform processing to the entire image, lacking the capability to perform region-customized image restoration according to user instructions. In this work, we propose a new framework, namely InstructRestore, to perform region-adjustable image restoration following human instructions. To achieve this, we first develop a data generation engine to produce training triplets, each consisting of a high-quality image, the target region description, and the corresponding region mask. With this engine and careful data screening, we construct a comprehensive dataset comprising 536,945 triplets to support the training and evaluation of this task. We then examine how to integrate the low-quality image features under the ControlNet architecture to adjust the degree of image details enhancement. Consequently, we develop a ControlNet-like model to identify the target region and allocate different integration scales to the target and surrounding regions, enabling region-customized image restoration that aligns with user instructions. Experimental results demonstrate that our proposed InstructRestore approach enables effective human-instructed image restoration, such as images with bokeh effects and user-instructed local enhancement. Our work advances the investigation of interactive image restoration and enhancement techniques. Data, code, and models will be found at https://github.com/shuaizhengliu/InstructRestore.git.

In image editing employing diffusion models, it is crucial to preserve the reconstruction quality of the original image while changing its style. Although existing methods ensure reconstruction quality through optimization, a drawback of these is the significant amount of time required for optimization. In this paper, we propose negative-prompt inversion, a method capable of achieving equivalent reconstruction solely through forward propagation without optimization, thereby enabling much faster editing processes. We experimentally demonstrate that the reconstruction quality of our method is comparable to that of existing methods, allowing for inversion at a resolution of 512 pixels and with 50 sampling steps within approximately 5 seconds, which is more than 30 times faster than null-text inversion. Reduction of the computation time by the proposed method further allows us to use a larger number of sampling steps in diffusion models to improve the reconstruction quality with a moderate increase in computation time.

Generative AI search is reshaping information retrieval by offering end-to-end answers to complex queries, reducing users' reliance on manually browsing and summarizing multiple web pages. However, while this paradigm enhances convenience, it disrupts the feedback-driven improvement loop that has historically powered the evolution of traditional Web search. Web search can continuously improve their ranking models by collecting large-scale, fine-grained user feedback (e.g., clicks, dwell time) at the document level. In contrast, generative AI search operates through a much longer search pipeline, spanning query decomposition, document retrieval, and answer generation, yet typically receives only coarse-grained feedback on the final answer. This introduces a feedback loop disconnect, where user feedback for the final output cannot be effectively mapped back to specific system components, making it difficult to improve each intermediate stage and sustain the feedback loop. In this paper, we envision NExT-Search, a next-generation paradigm designed to reintroduce fine-grained, process-level feedback into generative AI search. NExT-Search integrates two complementary modes: User Debug Mode, which allows engaged users to intervene at key stages; and Shadow User Mode, where a personalized user agent simulates user preferences and provides AI-assisted feedback for less interactive users. Furthermore, we envision how these feedback signals can be leveraged through online adaptation, which refines current search outputs in real-time, and offline update, which aggregates interaction logs to periodically fine-tune query decomposition, retrieval, and generation models. By restoring human control over key stages of the generative AI search pipeline, we believe NExT-Search offers a promising direction for building feedback-rich AI search systems that can evolve continuously alongside human feedback.

Image reconstruction from corrupted images is crucial across many domains. Most reconstruction networks are trained on post-ISP sRGB images, even though the image-signal-processing pipeline irreversibly mixes colors, clips dynamic range, and blurs fine detail. This paper uses the rain degradation problem as a use case to show that these losses are avoidable, and demonstrates that learning directly on raw Bayer mosaics yields superior reconstructions. To substantiate the claim, we (i) evaluate post-ISP and Bayer reconstruction pipelines, (ii) curate Raw-Rain, the first public benchmark of real rainy scenes captured in both 12-bit Bayer and bit-depth-matched sRGB, and (iii) introduce Information Conservation Score (ICS), a color-invariant metric that aligns more closely with human opinion than PSNR or SSIM. On the test split, our raw-domain model improves sRGB results by up to +0.99 dB PSNR and +1.2% ICS, while running faster with half of the GFLOPs. The results advocate an ISP-last paradigm for low-level vision and open the door to end-to-end learnable camera pipelines.

This paper tackles the challenge of robust reconstruction, i.e., the task of reconstructing a 3D scene from a set of inconsistent multi-view images. Some recent works have attempted to simultaneously remove image inconsistencies and perform reconstruction by integrating image degradation modeling into neural 3D scene representations. However, these methods rely heavily on dense observations for robustly optimizing model parameters. To address this issue, we propose to decouple robust reconstruction into two subtasks: restoration and reconstruction, which naturally simplifies the optimization process. To this end, we introduce UniVerse, a unified framework for robust reconstruction based on a video diffusion model. Specifically, UniVerse first converts inconsistent images into initial videos, then uses a specially designed video diffusion model to restore them into consistent images, and finally reconstructs the 3D scenes from these restored images. Compared with case-by-case per-view degradation modeling, the diffusion model learns a general scene prior from large-scale data, making it applicable to diverse image inconsistencies. Extensive experiments on both synthetic and real-world datasets demonstrate the strong generalization capability and superior performance of our method in robust reconstruction. Moreover, UniVerse can control the style of the reconstructed 3D scene. Project page: https://jin-cao-tma.github.io/UniVerse.github.io/

Conditional image editing aims to modify a source image according to textual prompts and optional reference guidance. Such editing is crucial in scenarios requiring strict structural control (i.e., anomaly insertion in driving scenes and complex human pose transformation). Despite recent advances in large-scale editing models (i.e., Seedream, Nano Banana, etc), most approaches rely on single-step generation. This paradigm often lacks explicit quality control, may introduce excessive deviation from the original image, and frequently produces structural artifacts or environment-inconsistent modifications, typically requiring manual prompt tuning to achieve acceptable results. We propose CAMEO, a structured multi-agent framework that reformulates conditional editing as a quality-aware, feedback-driven process rather than a one-shot generation task. CAMEO decomposes editing into coordinated stages of planning, structured prompting, hypothesis generation, and adaptive reference grounding, where external guidance is invoked only when task complexity requires it. To overcome the lack of intrinsic quality control in existing methods, evaluation is embedded directly within the editing loop. Intermediate results are iteratively refined through structured feedback, forming a closed-loop process that progressively corrects structural and contextual inconsistencies. We evaluate CAMEO on anomaly insertion and human pose switching tasks. Across multiple strong editing backbones and independent evaluation models, CAMEO consistently achieves 20\% more win rate on average compared to multiple state-of-the-art models, demonstrating improved robustness, controllability, and structural reliability in conditional image editing.

While recent Large Vision-Language Models (LVLMs) have shown remarkable performance in multi-modal tasks, they are prone to generating hallucinatory text responses that do not align with the given visual input, which restricts their practical applicability in real-world scenarios. In this work, inspired by the observation that the text-to-image generation process is the inverse of image-conditioned response generation in LVLMs, we explore the potential of leveraging text-to-image generative models to assist in mitigating hallucinations in LVLMs. We discover that generative models can offer valuable self-feedback for mitigating hallucinations at both the response and token levels. Building on this insight, we introduce self-correcting Decoding with Generative Feedback (DeGF), a novel training-free algorithm that incorporates feedback from text-to-image generative models into the decoding process to effectively mitigate hallucinations in LVLMs. Specifically, DeGF generates an image from the initial response produced by LVLMs, which acts as an auxiliary visual reference and provides self-feedback to verify and correct the initial response through complementary or contrastive decoding. Extensive experimental results validate the effectiveness of our approach in mitigating diverse types of hallucinations, consistently surpassing state-of-the-art methods across six benchmarks. Code is available at https://github.com/zhangce01/DeGF.

Transformer based methods have enabled users to create, modify, and comprehend text and image data. Recently proposed Large Reconstruction Models (LRMs) further extend this by providing the ability to generate high-quality 3D models with the help of a single object image. These models, however, lack the ability to manipulate or edit the finer details, such as adding standard design patterns or changing the color and reflectance of the generated objects, thus lacking fine-grained control that may be very helpful in domains such as augmented reality, animation and gaming. Naively training LRMs for this purpose would require generating precisely edited images and 3D object pairs, which is computationally expensive. In this paper, we propose Instructive3D, a novel LRM based model that integrates generation and fine-grained editing, through user text prompts, of 3D objects into a single model. We accomplish this by adding an adapter that performs a diffusion process conditioned on a text prompt specifying edits in the triplane latent space representation of 3D object models. Our method does not require the generation of edited 3D objects. Additionally, Instructive3D allows us to perform geometrically consistent modifications, as the edits done through user-defined text prompts are applied to the triplane latent representation thus enhancing the versatility and precision of 3D objects generated. We compare the objects generated by Instructive3D and a baseline that first generates the 3D object meshes using a standard LRM model and then edits these 3D objects using text prompts when images are provided from the Objaverse LVIS dataset. We find that Instructive3D produces qualitatively superior 3D objects with the properties specified by the edit prompts.

We propose NeRFiller, an approach that completes missing portions of a 3D capture via generative 3D inpainting using off-the-shelf 2D visual generative models. Often parts of a captured 3D scene or object are missing due to mesh reconstruction failures or a lack of observations (e.g., contact regions, such as the bottom of objects, or hard-to-reach areas). We approach this challenging 3D inpainting problem by leveraging a 2D inpainting diffusion model. We identify a surprising behavior of these models, where they generate more 3D consistent inpaints when images form a 2times2 grid, and show how to generalize this behavior to more than four images. We then present an iterative framework to distill these inpainted regions into a single consistent 3D scene. In contrast to related works, we focus on completing scenes rather than deleting foreground objects, and our approach does not require tight 2D object masks or text. We compare our approach to relevant baselines adapted to our setting on a variety of scenes, where NeRFiller creates the most 3D consistent and plausible scene completions. Our project page is at https://ethanweber.me/nerfiller.

We introduce a novel sketch-to-image tool that aligns with the iterative refinement process of artists. Our tool lets users sketch blocking strokes to coarsely represent the placement and form of objects and detail strokes to refine their shape and silhouettes. We develop a two-pass algorithm for generating high-fidelity images from such sketches at any point in the iterative process. In the first pass we use a ControlNet to generate an image that strictly follows all the strokes (blocking and detail) and in the second pass we add variation by renoising regions surrounding blocking strokes. We also present a dataset generation scheme that, when used to train a ControlNet architecture, allows regions that do not contain strokes to be interpreted as not-yet-specified regions rather than empty space. We show that this partial-sketch-aware ControlNet can generate coherent elements from partial sketches that only contain a small number of strokes. The high-fidelity images produced by our approach serve as scaffolds that can help the user adjust the shape and proportions of objects or add additional elements to the composition. We demonstrate the effectiveness of our approach with a variety of examples and evaluative comparisons. Quantitatively, evaluative user feedback indicates that novice viewers prefer the quality of images from our algorithm over a baseline Scribble ControlNet for 84% of the pairs and found our images had less distortion in 81% of the pairs.

City-scale 3D reconstruction from satellite imagery presents the challenge of extreme viewpoint extrapolation, where our goal is to synthesize ground-level novel views from sparse orbital images with minimal parallax. This requires inferring nearly 90^circ viewpoint gaps from image sources with severely foreshortened facades and flawed textures, causing state-of-the-art reconstruction engines such as NeRF and 3DGS to fail. To address this problem, we propose two design choices tailored for city structures and satellite inputs. First, we model city geometry as a 2.5D height map, implemented as a Z-monotonic signed distance field (SDF) that matches urban building layouts from top-down viewpoints. This stabilizes geometry optimization under sparse, off-nadir satellite views and yields a watertight mesh with crisp roofs and clean, vertically extruded facades. Second, we paint the mesh appearance from satellite images via differentiable rendering techniques. While the satellite inputs may contain long-range, blurry captures, we further train a generative texture restoration network to enhance the appearance, recovering high-frequency, plausible texture details from degraded inputs. Our method's scalability and robustness are demonstrated through extensive experiments on large-scale urban reconstruction. For example, in our teaser figure, we reconstruct a 4,km^2 real-world region from only a few satellite images, achieving state-of-the-art performance in synthesizing photorealistic ground views. The resulting models are not only visually compelling but also serve as high-fidelity, application-ready assets for downstream tasks like urban planning and simulation. Project page can be found at https://pku-vcl-geometry.github.io/Orbit2Ground/.

Coding agents can fix a failing example without preserving the domain rule that made it fail, so later generations can repeat the same plausible mistake. We present agentic synthesis against counterexample-supplemented sketches, a repository-native method for systems whose governing policy is discovered during implementation. A human starts with a partial, code-shaped sketch, and a coding agent generates the first implementation. When a concrete failure exposes missing or mistaken policy, an operator explicitly approves the corrected behavior and rule. The agent then revises the sketch and repairs or regenerates code and prompt surfaces for that one counterexample. The full archive preserves provenance; a selected regression set gates each revision before the next candidate is revealed; and periodic clean regeneration tests whether the evolved sketch, rather than prompt history or accumulated examples, carries the learned policy. We demonstrate the method with CatSynth, a synthetic browser application and captured coding-agent experiment. In one open-world run with GPT-5.4-mini, 8 of 14 frozen candidate cases became counterexamples. The rebuild controls inherited that promotion schedule, and all three paths passed the 8 accepted cases. Rebuilding from the evolved sketch passed 19 of 21 withheld cases, compared with 15 of 21 when rebuilding from the initial sketch and replaying all accepted examples. Retaining code across counterexamples required 9 Developer calls and 719 lines of cumulative artifact churn, versus 15 calls and 2,394 lines for replay-all, and passed 18 of 21 withheld cases. These results provide inspectable evidence that the evolved sketch carried reviewed policy and that retaining code reduced rework in this run; with one model and one reveal order, they do not establish general superiority or correctness beyond the encoded checks.

Image restoration aims to reconstruct degraded images, e.g., denoising or deblurring. Existing works focus on designing task-specific methods and there are inadequate attempts at universal methods. However, simply unifying multiple tasks into one universal architecture suffers from uncontrollable and undesired predictions. To address those issues, we explore prompt learning in universal architectures for image restoration tasks. In this paper, we present Degradation-aware Visual Prompts, which encode various types of image degradation, e.g., noise and blur, into unified visual prompts. These degradation-aware prompts provide control over image processing and allow weighted combinations for customized image restoration. We then leverage degradation-aware visual prompts to establish a controllable and universal model for image restoration, called ProRes, which is applicable to an extensive range of image restoration tasks. ProRes leverages the vanilla Vision Transformer (ViT) without any task-specific designs. Furthermore, the pre-trained ProRes can easily adapt to new tasks through efficient prompt tuning with only a few images. Without bells and whistles, ProRes achieves competitive performance compared to task-specific methods and experiments can demonstrate its ability for controllable restoration and adaptation for new tasks. The code and models will be released in https://github.com/leonmakise/ProRes.

Many LLM-based open-ended search systems freeze the foundation model that proposes improvements to existing solutions, which may bottleneck long-run progress. Recent work has explored updating the proposal model at test time [arXiv:2511.23473], but the update strategy is still typically hand-specified. Therefore, this study investigated whether an LLM can use task feedback to decide how it should update its weights. For tractability, we focused on the simpler case where there is only one round of self-improvement, and restricted the update operator to self-supervised next token prediction (NTP), leaving the model freedom in choosing its training data and key NTP hyperparameters. Using the Self-Adapting Language Models (SEAL) [arXiv:2506.10943] framework as a testbed, we relaxed its fixed human template constraint and allowed the model to generate its own self-edit templates, thereby giving it more control over its training data and hyperparameters. Two variants were studied, differing in whether template generation was conditioned on a lightweight archive of past templates. In SEAL's Single-Passage Knowledge Incorporation setting with Qwen3-8B on SQuAD [arXiv:1606.05250], the no-archive variant performed comparably to the weaker "Implications" baseline, while the archive variant outperformed "Implications" and approached the strongest human-designed "Rewrite" baseline without surpassing it. Further analysis of collapse in the model's exploration revealed that a naive archive can confer some short-term robustness but can also accelerate homogenization, suggesting that explicit novelty pressure may be required to consistently advance beyond carefully optimized human strategies. Our code is available at https://github.com/cheongalc/search-self-edit-strategies .

Coding agents often finish a session by returning one squashed patch that mixes feature implementation, bug fixes, refactorings, tests, and configuration edits. While the final code may be correct, collapsing unrelated edits into one patch removes the history structure needed for review, selective revert, and later maintenance. We study retrospective commit-history reconstruction: given a completed squashed change, an agent groups its hunks into commits and materializes a replayable commit sequence. We formalize the task as hunk-to-commit partitioning with a replay requirement and build AtomicCommitBench, containing 800 real consecutive-commit episodes from 10 Python projects. Because multiple decompositions may be reasonable, we evaluate outputs using complementary metrics: PPAR for replay validity, ARI for reference-based grouping quality, and TCR for failure containment on scoreable modified-test episodes. Natural retrospective reconstruction proves substantially harder than replay checking or synthetic tangling. Although nearly all non-random methods achieve replay validity (PPAR >= 0.988), grouping quality ranges from 0.03 to 0.46 ARI. Matched synthetic composites are much easier than real same-author squashed diffs (+0.333 ARI). In our evaluation, the GPT-5.4 setup driven by Codex CLI (0.46 ARI) and the GLM-5 setup driven by Claude Code (0.43 ARI) outperform MiniMax (0.31) and Kimi (0.29). Qualitative analysis identifies same-file lumping and support-hunk drift as recurring failure modes. Dependency-Aware Commit Evidence (DACE) improves the lower-scoring setups by 0.05 to 0.08 ARI, indicating that dependency cues and hunk-role information help agents avoid locality-driven grouping errors. AtomicCommitBench enables evaluation of the commit histories produced by coding agents alongside the final code.

High-quality feedback is essential for effective human-AI interaction. It bridges knowledge gaps, corrects digressions, and shapes system behavior; both during interaction and throughout model development. Yet despite its importance, human feedback to AI is often infrequent and low quality. This gap motivates a critical examination of human feedback during interactions with AIs. To understand and overcome the challenges preventing users from giving high-quality feedback, we conducted two studies examining feedback dynamics between humans and conversational agents (CAs). Our formative study, through the lens of Grice's maxims, identified four Feedback Barriers -- Common Ground, Verifiability, Communication, and Informativeness -- that prevent high-quality feedback by users. Building on these findings, we derive three design desiderata and show that systems incorporating scaffolds aligned with these desiderata enabled users to provide higher-quality feedback. Finally, we detail a call for action to the broader AI community for advances in Large Language Models capabilities to overcome Feedback Barriers.