Daily Papers

Repository-grounded automated repair is often reported as a single end-to-end capability, which hides distinct failure modes such as poor file targeting, incorrect patch synthesis, and failed iterative debugging. We present Loc2Repair, a modular evaluation framework for controlled analysis of repository-grounded repair pipelines, and use it to isolate file-level issue localization as an upstream variable. Loc2Repair decouples localization and repair under a shared runtime, artifact schema, and evaluation harness, allowing researchers to combine different localization models and repair backbones under matched conditions. Using three repair backbones on SWE-bench Verified, we compare baseline repair without explicit localization, repair guided by predicted localization from two localizers, and repair guided by gold modified-file sets. Explicit localization consistently improves resolved rate across all backbones: pooled performance increases from 44.7% for baseline repair to 48.9% and 49.1% with predicted localization, and to 52.4% with gold localization. Localization also reduces mean elapsed time overall: in pooled paired analysis, mean elapsed time decreases by 100.94 s and 52.25 s for the two predicted-localization settings, and by 154.45 s with gold guidance, although token effects remain heterogeneous across models. Overall, Loc2Repair shows file-level localization is a consistent repair lever, improving effectiveness and mean latency in pooled analysis, while gold-guided failures expose headroom beyond localization.

Existing methods for multimodal sentiment analysis (MSA) under missing modalities usually follow a repair-first paradigm. We revisit this assumption and ask: should every missing modality be repaired? A per-sample oracle analysis shows the answer is not always: full-modality input is optimal for only a small fraction of samples, and every modality subset is preferred by some samples. These results suggest that adding or repairing modalities may not always improve prediction, and that the utility of each modality is sample-dependent. Building on this finding, we propose Sufficiency-Informed Evidential ValvE (SIEVE) that turns ``whether to repair'' into an explicit, learnable decision at the sample level. SIEVE compares a direct prediction branch with a repair branch, derives an empirical sufficiency signal from their per-sample loss gap, and routes each input through an evidential gate that jointly models sufficiency and its epistemic uncertainty. SIEVE is repair-agnostic: it operates as a plug-and-play decision on top of any explicit or implicit repair module, without modifying its internal design. Experiments on CMU-MOSI and IEMOCAP show that SIEVE consistently improves representative repair backbones across evaluated missing rates, and approaches the per-sample dual-branch achievable optimum.

We study fact-level repair for multimodal generation, where a fluent output may contain specific facts that are not supported by the input. Existing inference-time repair methods often generate feedback by jointly conditioning on the input and the current output. This design has two limitations: hallucinated claims in the output can bias the model's interpretation of the input, and free-form feedback cannot be ranked or scheduled at the fact level. We present TIGER, an inference-time framework that redesigns feedback for localized repair. TIGER independently extracts an observation graph from the input and a claim graph from the current output, then assigns each claim a graph-conditioned risk score based on support and conflict. The model repairs selected high-risk claims while keeping the backbone frozen. We provide a convergence analysis showing that the expected total risk decreases geometrically to an explicit asymptotic bound under mild assumptions. Experiments across four cross-modal paths, including image-to-text, image+text-to-text, audio-to-text, and video-to-text, show that TIGER reduces unsupported content while preserving task quality. The gains hold across multiple backbones, and a CrisisFACTS case study suggests that the same repair mechanism can improve grounding in multi-source settings.

APR (Automated Program Repair) aims to automatically locate program defects, generate patches and validate the repairs. Existing techniques for APR are often combined with LLMs (Large Language Models), which leverages the code-related knowledge of LLMs to improve repair effectiveness. Current LLM-based APR methods typically utilize test cases only during the inference stage, adopting an iterative approach that performs repair first and validates it through test execution afterward. This conventional paradigm neglects two important aspects: the potential contribution of test cases in the training phase, and the possibility of leveraging testing prior to repair. To address this, we propose Repair-R1, which introduces test cases into the model's training phase and shifts test generation to precede repair. The model is required to first generate discriminative test cases that can distinguish defective behaviors, and then perform repair based on these tests. This enables the model to better locate defects and understand the underlying causes of defects, thereby improving repair effectiveness. We implement Repair-R1 with three different backbone models, using RL (reinforcement learning) to co-optimize test generation and bug repair. Experimental results on four widely adopted benchmarks demonstrate the superiority of Repair-R1. Specially, compared to vanilla models, Repair-R1 improves repair success rate by 2.68\% to 48.29\%, test generation success rate by 16.38\% to 53.28\%, and test coverage by 0.78\% to 53.96\%. We publish the code and weights at https://github.com/Tomsawyerhu/APR-RL and https://huggingface.co/tomhu/Qwen3-4B-RL-5000-step.

Advances in self-supervised learning (SSL) for machine vision have improved representation robustness and model performance, giving rise to pre-trained backbones like ResNet and ViT models tuned with SSL methods such as SimCLR. Due to the computational and data demands of pre-training, the utilization of such backbones becomes a strenuous necessity. However, employing these backbones may inherit vulnerabilities to adversarial attacks. While adversarial robustness has been studied under white-box and black-box settings, the robustness of models tuned on pre-trained backbones remains largely unexplored. Additionally, the role of tuning meta-information in mitigating exploitation risks is unclear. This work systematically evaluates the adversarial robustness of such models across 20,000 combinations of tuning meta-information, including fine-tuning techniques, backbone families, datasets, and attack types. We propose using proxy models to transfer attacks, simulating varying levels of target knowledge by fine-tuning these proxies with diverse configurations. Our findings reveal that proxy-based attacks approach the effectiveness of white-box methods, even with minimal tuning knowledge. We also introduce a naive "backbone attack," leveraging only the backbone to generate adversarial samples, which outperforms black-box attacks and rivals white-box methods, highlighting critical risks in model-sharing practices. Finally, our ablations reveal how increasing tuning meta-information impacts attack transferability, measuring each meta-information combination.

Automated shape repair approaches currently lack access to datasets that describe real-world damaged geometry. We present Fantastic Breaks (and Where to Find Them: https://terascale-all-sensing-research-studio.github.io/FantasticBreaks), a dataset containing scanned, waterproofed, and cleaned 3D meshes for 150 broken objects, paired and geometrically aligned with complete counterparts. Fantastic Breaks contains class and material labels, proxy repair parts that join to broken meshes to generate complete meshes, and manually annotated fracture boundaries. Through a detailed analysis of fracture geometry, we reveal differences between Fantastic Breaks and synthetic fracture datasets generated using geometric and physics-based methods. We show experimental shape repair evaluation with Fantastic Breaks using multiple learning-based approaches pre-trained with synthetic datasets and re-trained with subset of Fantastic Breaks.

Online 3D reconstruction models perform poorly on long videos. This happens because regressing poses relative to a fixed first-frame anchor forces extrapolation far beyond the training distribution. Small drifts accumulate and amplify into significant geometric collapse. However, we observe that per-frame depth remains stable throughout this failure. The backbone's local geometry remains intact; only the global pose head breaks down. Motivated by this decoupling, we introduce Scal3R. This approach reformulates online reconstruction as multi-reference relative pose querying. We use lightweight learnable tokens, which make up about ~1% of the parameters, and inject them into a completely frozen backbone via asymmetric attention. This setup queries poses relative to multiple past keyframes. An online pose-graph optimization system with loop closure suppresses long-range drift. Scal3R reaches convergence in 8 hours on a single GPU. It reduces the average ATE by over 60% on KITTI compared to the online baseline. It also achieves state-of-the-art performance across Virtual KITTI, Sintel, TUM-Dynamic, ScanNet, and 7-Scenes. Project page: https://linjohnss.github.io/scal3r/

Not a day goes by without hearing about the impressive feats of large language models (LLMs), and equally, not a day passes without hearing about their challenges. LLMs are notoriously vulnerable to biases in their dataset, leading to issues such as toxicity. While domain-adaptive training has been employed to mitigate these issues, these techniques often address all model parameters indiscriminately during the repair process, resulting in poor repair quality and reduced model versatility. In this paper, we introduce a novel dynamic slicing-based intent-aware LLM repair strategy, IRepair. This approach selectively targets the most error-prone sections of the model for repair. Specifically, we propose dynamically slicing the model's most sensitive layers that require immediate attention, concentrating repair efforts on those areas. This method enables more effective repairs with potentially less impact on the model's overall performance by altering a smaller portion of the model. We evaluated our technique on three models from the GPT2 and GPT-Neo families, with parameters ranging from 800M to 1.6B, in a toxicity mitigation setup. Our results show that IRepair repairs errors 43.6% more effectively while causing 46% less disruption to general performance compared to the closest baseline, direct preference optimization. Our empirical analysis also reveals that errors are more concentrated in a smaller section of the model, with the top 20% of layers exhibiting 773% more error density than the remaining 80\%. This highlights the need for selective repair. Additionally, we demonstrate that a dynamic selection approach is essential for addressing errors dispersed throughout the model, ensuring a robust and efficient repair.

Click-based interactive image segmentation aims at extracting objects with a limited user clicking. A hierarchical backbone is the de-facto architecture for current methods. Recently, the plain, non-hierarchical Vision Transformer (ViT) has emerged as a competitive backbone for dense prediction tasks. This design allows the original ViT to be a foundation model that can be finetuned for downstream tasks without redesigning a hierarchical backbone for pretraining. Although this design is simple and has been proven effective, it has not yet been explored for interactive image segmentation. To fill this gap, we propose SimpleClick, the first interactive segmentation method that leverages a plain backbone. Based on the plain backbone, we introduce a symmetric patch embedding layer that encodes clicks into the backbone with minor modifications to the backbone itself. With the plain backbone pretrained as a masked autoencoder (MAE), SimpleClick achieves state-of-the-art performance. Remarkably, our method achieves 4.15 NoC@90 on SBD, improving 21.8% over the previous best result. Extensive evaluation on medical images demonstrates the generalizability of our method. We further develop an extremely tiny ViT backbone for SimpleClick and provide a detailed computational analysis, highlighting its suitability as a practical annotation tool.

Large language models (LLMs) inherently absorb harmful knowledge, misinformation, and personal data during pretraining on large-scale web corpora, with no native mechanism for selective removal. While machine unlearning offers a principled solution, existing approaches are provider-centric, requiring retraining pipelines, curated retain datasets, and direct intervention by model service providers (MSPs), thereby excluding end users from controlling their own data. We introduce Interactive Machine Unlearning (IMU), a new paradigm in which users can instruct LLMs to forget targeted knowledge through natural language at inference time. To realize IMU, we propose RePAIR, a prompt-aware model repair framework comprising (i) a watchdog model for unlearning intent detection, (ii) a surgeon model for generating repair procedures, and (iii) a patient model whose parameters are updated autonomously. At the core of RePAIR, we develop Steering Through Activation Manipulation with PseudoInverse (STAMP), a training-free, single-sample unlearning method that redirects MLP activations toward a refusal subspace via closed-form pseudoinverse updates. Its low-rank variant reduces computational complexity from O(d^3) to O(r^3 + r^2 * d), enabling efficient on-device unlearning with up to ~3x speedup over training-based baselines. Extensive experiments across harmful knowledge suppression, misinformation correction, and personal data erasure demonstrate that RePAIR achieves near-zero forget scores (Acc_f = 0.00, F-RL = 0.00) while preserving model utility (Acc_r up to 84.47, R-RL up to 0.88), outperforming six state-of-the-art baselines. These results establish RePAIR as an effective and practical framework for user-driven model editing, advancing transparent and on-device control over learned knowledge, with potential extensions to multimodal foundation models.

Reliably transferring specialized human knowledge from text into large language models remains a fundamental challenge in artificial intelligence. Fine-tuning on domain corpora has enabled substantial capability gains, but the process operates without feedback: when a model fails on a domain task, there is no method to diagnose what is deficient in the training data, and the only recourse is to add more data indiscriminately. Here we show that when a structured knowledge representation extracted from the source corpus serves as the shared foundation for both training data and evaluation, the complete data-engineering lifecycle maps onto the software development lifecycle in a precise and operative way: training data becomes source code specifying what the model should learn, model training becomes compilation, benchmarking becomes unit testing, and failure-driven data repair becomes debugging. Under this correspondence, model failures decompose into concept-level gaps and reasoning-chain breaks that can be traced back to specific deficiencies in the data and repaired through targeted patches, with each repair cycle producing consistent improvements across model scales and architectures without degrading general capabilities. We formalize this principle as Programming with Data and instantiate it across sixteen disciplines spanning the natural sciences, engineering, biomedicine, and the social sciences, releasing a structured knowledge base, benchmark suite, and training corpus as open resources. By demonstrating that the relationship between training data and model behaviour is structurally traceable and systematically repairable, this work establishes a principled foundation for the reliable engineering of human expertise into language models.

Large vision--language models (VLMs) often use a frozen vision backbone, whose image features are mapped into a large language model through a lightweight connector. While transformer-based encoders are the standard visual backbone, we ask whether state space model (SSM) vision backbones can be a strong alternative. We systematically evaluate SSM vision backbones for VLMs in a controlled setting. Under matched ImageNet-1K initialization, the SSM backbone achieves the strongest overall performance across both VQA and grounding/localization. We further adapt both SSM and ViT-family backbones with detection or segmentation training and find that dense-task tuning generally improves performance across families; after this adaptation, the SSM backbone remains competitive while operating at a substantially smaller model scale. We further observe that (i) higher ImageNet accuracy or larger backbones do not reliably translate into better VLM performance, and (ii) some visual backbones are unstable in localization. Based on these findings, we propose stabilization strategies that improve robustness for both backbone families and highlight SSM backbones as a strong alternative to transformer-based vision encoders in VLMs.

Neural network based computer vision systems are typically built on a backbone, a pretrained or randomly initialized feature extractor. Several years ago, the default option was an ImageNet-trained convolutional neural network. However, the recent past has seen the emergence of countless backbones pretrained using various algorithms and datasets. While this abundance of choice has led to performance increases for a range of systems, it is difficult for practitioners to make informed decisions about which backbone to choose. Battle of the Backbones (BoB) makes this choice easier by benchmarking a diverse suite of pretrained models, including vision-language models, those trained via self-supervised learning, and the Stable Diffusion backbone, across a diverse set of computer vision tasks ranging from classification to object detection to OOD generalization and more. Furthermore, BoB sheds light on promising directions for the research community to advance computer vision by illuminating strengths and weakness of existing approaches through a comprehensive analysis conducted on more than 1500 training runs. While vision transformers (ViTs) and self-supervised learning (SSL) are increasingly popular, we find that convolutional neural networks pretrained in a supervised fashion on large training sets still perform best on most tasks among the models we consider. Moreover, in apples-to-apples comparisons on the same architectures and similarly sized pretraining datasets, we find that SSL backbones are highly competitive, indicating that future works should perform SSL pretraining with advanced architectures and larger pretraining datasets. We release the raw results of our experiments along with code that allows researchers to put their own backbones through the gauntlet here: https://github.com/hsouri/Battle-of-the-Backbones

Despite the significant progress made by deep models in various image restoration tasks, existing image restoration networks still face challenges in terms of task generality. An intuitive manifestation is that networks which excel in certain tasks often fail to deliver satisfactory results in others. To illustrate this point, we select five representative networks and conduct a comparative study on five classic image restoration tasks. First, we provide a detailed explanation of the characteristics of different image restoration tasks and backbone networks. Following this, we present the benchmark results and analyze the reasons behind the performance disparity of different models across various tasks. Drawing from this comparative study, we propose that a general image restoration backbone network needs to meet the functional requirements of diverse tasks. Based on this principle, we design a new general image restoration backbone network, X-Restormer. Extensive experiments demonstrate that X-Restormer possesses good task generality and achieves state-of-the-art performance across a variety of tasks.

LLM-based Lean proving systems increasingly organize a proof as a blueprint: a dependency graph of formal statements. We introduce BlueprintRepair, a repair interface that lets a model change this graph through ten schema-checked local operations. An operation names the node it edits, so the target theorem cannot be changed. Lean checks every applied change, and an accepted repair must declare every blueprint lemma its proof uses. We also construct BlueprintTrace, a benchmark of 142 controlled failures with complete accepted and rejected repair trajectories. We compare typed edits, exact source patches, and complete module rewrites under matched source, feedback, model, and budget, one episode per state and interface. With DeepSeek-V4-Flash, the three interfaces solve almost the same number of the benchmark's localized failures. Typed repair is the cheapest per solved state (patching is 1.30x as expensive, rewriting 2.06x), and within 10,000 completion tokens per task it reaches almost all of its final coverage, while both free-form interfaces are well behind. A second model, Qwen3.6-Flash, solves fewer states but keeps typed repair cheapest, puts it ahead on the proof-authoring states, and repeats the localized pattern.

Current popular backbones in computer vision, such as Vision Transformers (ViT) and ResNets are trained to perceive the world from 2D images. However, to more effectively understand 3D structural priors in 2D backbones, we propose Mask3D to leverage existing large-scale RGB-D data in a self-supervised pre-training to embed these 3D priors into 2D learned feature representations. In contrast to traditional 3D contrastive learning paradigms requiring 3D reconstructions or multi-view correspondences, our approach is simple: we formulate a pre-text reconstruction task by masking RGB and depth patches in individual RGB-D frames. We demonstrate the Mask3D is particularly effective in embedding 3D priors into the powerful 2D ViT backbone, enabling improved representation learning for various scene understanding tasks, such as semantic segmentation, instance segmentation and object detection. Experiments show that Mask3D notably outperforms existing self-supervised 3D pre-training approaches on ScanNet, NYUv2, and Cityscapes image understanding tasks, with an improvement of +6.5% mIoU against the state-of-the-art Pri3D on ScanNet image semantic segmentation.

3D fragment reassembly aims to recover the rigid poses of unordered fragment point clouds or meshes in a common object coordinate system to reconstruct the complete shape. The problem becomes particularly challenging as the number of fragments grows, since the target shape is unknown and fragments provide weak semantic cues. Existing end-to-end approaches are prone to cascading failures due to unreliable contact reasoning, most notably inaccurate fragment adjacencies. To address this, we propose Structure-Aware Reassembly (SARe), a generative framework with SARe-Gen for Euclidean-space assembly generation and SARe-Refine for inference-time refinement, with explicit contact modeling. SARe-Gen jointly predicts fracture-surface token probabilities and an inter-fragment contact graph to localize contact regions and infer candidate adjacencies. It adopts a query-point-based conditioning scheme and extracts aligned local geometric tokens at query locations from a frozen geometry encoder, yielding queryable structural representations without additional structural pretraining. We further introduce an inference-time refinement stage, SARe-Refine. By verifying candidate contact edges with geometric-consistency checks, it selects reliable substructures and resamples the remaining uncertain regions while keeping verified parts fixed, leading to more stable and consistent assemblies in the many-fragment regime. We evaluate SARe across three settings, including synthetic fractures, simulated fractures from scanned real objects, and real physically fractured scans. The results demonstrate state-of-the-art performance, with more graceful degradation and higher success rates as the fragment count increases in challenging large-scale reassembly.

Large language model (LLM) agents are increasingly used for multi-step, stateful tool-use tasks, yet production reliability remains limited. Unlike static software repair, agent repair must recover dynamic trajectories whose early decisions can propagate into later errors and external state changes. Existing automatic remedies address only part of this problem: blind retry adds no diagnosis, outcome feedback says whether a run failed but not where or why, and self-reflection often lacks grounded evidence to prevent the same failure from recurring. We present AgentTether, a run-time repair framework that automates post-run diagnosis and guided recovery without modifying the underlying agent or environment. AgentTether abstracts each run into Transition Units, links them through a dependency-aware Critical Transition Graph, and localizes failure-critical subtrajectories by combining an offline normal-behavior model with a run-local graph detector. It then converts the localized cause into behavior-scoped guidance backed by cross-iteration Repair Memory, and can optionally apply guarded run-time intervention to keep the correction active during re-execution. The same design can be deployed as an offline diagnostic-and-guidance tool or as an online repair layer. We evaluate AgentTether on 261 tau-bench tasks across three domains with Qwen3.7-max, and test cross-model transfer on Banking with GPT-5.4. On the hardest Banking domain, AgentTether repairs 59.04% (49/83) of initially failed Qwen3.7-max tasks and 65.12% (56/86) of initially failed GPT-5.4 tasks. Overall, AgentTether improves repair effectiveness while reducing agent turns and end-to-end approach tokens, suggesting a practical reliability layer that can wrap existing agent deployments, reduce wasted re-execution, and improve recovery without retraining the agent.

Automated assembly of 3D fractures is essential in orthopedics, archaeology, and our daily life. This paper presents Jigsaw, a novel framework for assembling physically broken 3D objects from multiple pieces. Our approach leverages hierarchical features of global and local geometry to match and align the fracture surfaces. Our framework consists of four components: (1) front-end point feature extractor with attention layers, (2) surface segmentation to separate fracture and original parts, (3) multi-parts matching to find correspondences among fracture surface points, and (4) robust global alignment to recover the global poses of the pieces. We show how to jointly learn segmentation and matching and seamlessly integrate feature matching and rigidity constraints. We evaluate Jigsaw on the Breaking Bad dataset and achieve superior performance compared to state-of-the-art methods. Our method also generalizes well to diverse fracture modes, objects, and unseen instances. To the best of our knowledge, this is the first learning-based method designed specifically for 3D fracture assembly over multiple pieces. Our code is available at https://jiaxin-lu.github.io/Jigsaw/.

Existing evaluations often reduce agent failures to system-level outcomes, obscuring where the fault originated and which intervention would improve the agent system. This creates a repair-assignment problem: the same visible failure may call for model post-training, harness engineering, environment redesign, or benchmark repair depending on its source. Because agent behavior emerges from interactions among models, harnesses, users, tools, memory, and environments, outcome-level labels are often insufficient for improvement. Most failure taxonomies do little to resolve this problem because they are benchmark-specific and lack a shared structure. We introduce an interaction-centric taxonomy that localizes failures to the interactions in which they originate and identifies the responsible component. It organizes 41 failure modes by assigning each to an edge between two components and a fault side indicating where the repair belongs. This makes the taxonomy actionable: model-side failures identify targets for post-training, harness-side failures point to scaffolding and tool-integration fixes, and environment or grader failures reveal evaluation conditions requiring redesign. The schema applies across agent architectures, from coding assistants to long-horizon personal assistants and multi-agent systems. We ground the taxonomy in worked examples from public benchmarks, model system cards, published reports, and logged agent trajectories, and evaluate its reproducibility using independent reasoning agents as judges. Across four frontier models, the strongest judge reaches Cohen's κ=0.76 against human category labels, suggesting that the categories capture shared structure rather than annotator-specific preferences.

An LLM safety patch can pass a benchmark while still being a poor repair. This risk is especially acute for jailbreak repairs, where the goal is to correct a specific unsafe behaviour without changing unrelated behaviours. A patch may block exact evaluation prompts yet fail on close harmful variants, or suppress harmful behaviour by over-refusing benign prompts that share its wording or structure. Existing protocols primarily test whether models can be broken, while aggregate metrics (attack success, refusal rates, global capability) cannot distinguish selective repairs from broader local suppression. To address this gap, we introduce PatchBench, a benchmark of empirically observed model-specific jailbreak failures inducing actionable harmful answers. Starting from 27,870 prompts from 37 public datasets, we curate 15,314 English prompts and query 8 open-source instruction-tuned models. Combining WildGuard filtering, pairwise Elo ranking, and manual verification, we retain a curated bank of 400 high-confidence jailbreak failures. We further introduce PatchBench-Local, an evaluation protocol testing whether a patch is behaviourally precise. For each harmful source prompt, PatchBench-Local generates three families of local neighbours: harmful variants preserving malicious intent, benign prompts with matched structure, and benign prompts reusing key harmful terms. It evaluates harmful-neighbour correction and benign-neighbour preservation, distinguishing selective repair from broader local suppression. Evaluating four activation steering methods with PatchBench-Local and MMLU shows that global capability can remain nearly unchanged while local benign regressions are severe, confirming aggregate metrics miss important collateral damage. PatchBench-Local provides a more precise basis for developing and comparing jailbreak repair methods.

In this paper, we propose RI3D, a novel 3DGS-based approach that harnesses the power of diffusion models to reconstruct high-quality novel views given a sparse set of input images. Our key contribution is separating the view synthesis process into two tasks of reconstructing visible regions and hallucinating missing regions, and introducing two personalized diffusion models, each tailored to one of these tasks. Specifically, one model ('repair') takes a rendered image as input and predicts the corresponding high-quality image, which in turn is used as a pseudo ground truth image to constrain the optimization. The other model ('inpainting') primarily focuses on hallucinating details in unobserved areas. To integrate these models effectively, we introduce a two-stage optimization strategy: the first stage reconstructs visible areas using the repair model, and the second stage reconstructs missing regions with the inpainting model while ensuring coherence through further optimization. Moreover, we augment the optimization with a novel Gaussian initialization method that obtains per-image depth by combining 3D-consistent and smooth depth with highly detailed relative depth. We demonstrate that by separating the process into two tasks and addressing them with the repair and inpainting models, we produce results with detailed textures in both visible and missing regions that outperform state-of-the-art approaches on a diverse set of scenes with extremely sparse inputs.

AI-driven program repair uses AI models to repair buggy software by producing patches. Rapid advancements in AI surely impact state-of-the-art performance of program repair. Yet, grasping this progress requires frequent and standardized evaluations. We propose RepairBench, a novel leaderboard for AI-driven program repair. The key characteristics of RepairBench are: 1) it is execution-based: all patches are compiled and executed against a test suite, 2) it assesses frontier models in a frequent and standardized way. RepairBench leverages two high-quality benchmarks, Defects4J and GitBug-Java, to evaluate frontier models against real-world program repair tasks. We publicly release the evaluation framework of RepairBench. We will update the leaderboard as new frontier models are released.

Correcting bugs using modern Automated Program Repair (APR) can be both time-consuming and resource-expensive. We describe a program repair approach that aims to improve the scalability of modern APR tools. The approach leverages program reduction in the form of program slicing to eliminate code irrelevant to fixing the bug, which improves the APR tool's overall performance. We investigate slicing's impact on all three phases of the repair process: fault localization, patch generation, and patch validation. Our empirical exploration finds that the proposed approach, on average, enhances the repair ability of the TBar APR tool, but we also discovered a few cases where it was less successful. Specifically, on examples from the widely used Defects4J dataset, we obtain a substantial reduction in median repair time, which falls from 80 minutes to just under 18 minutes. We conclude that program reduction can improve the performance of APR without degrading repair quality, but this improvement is not universal. A replication package is available via Zenodo at https://doi.org/10.5281/zenodo.13074333. Keywords: automated program repair, dynamic program slicing, fault localization, test-suite reduction, hybrid techniques.

Counterexample-guided repair aims at creating neural networks with mathematical safety guarantees, facilitating the application of neural networks in safety-critical domains. However, whether counterexample-guided repair is guaranteed to terminate remains an open question. We approach this question by showing that counterexample-guided repair can be viewed as a robust optimisation algorithm. While termination guarantees for neural network repair itself remain beyond our reach, we prove termination for more restrained machine learning models and disprove termination in a general setting. We empirically study the practical implications of our theoretical results, demonstrating the suitability of common verifiers and falsifiers for repair despite a disadvantageous theoretical result. Additionally, we use our theoretical insights to devise a novel algorithm for repairing linear regression models based on quadratic programming, surpassing existing approaches.

The recovery of damaged or resected ribcage structures requires precise, custom-designed implants to restore the integrity and functionality of the thoracic cavity. Traditional implant design methods rely mainly on manual processes, making them time-consuming and susceptible to variability. In this work, we explore the feasibility of automated ribcage implant generation using deep learning. We present a framework based on 3D U-Net architecture that processes CT scans to generate patient-specific implant designs. To the best of our knowledge, this is the first investigation into automated thoracic implant generation using deep learning approaches. Our preliminary results, while moderate, highlight both the potential and the significant challenges in this complex domain. These findings establish a foundation for future research in automated ribcage reconstruction and identify key technical challenges that need to be addressed for practical implementation.

Tool-using LLM agents face a reliability-cost tradeoff: routing every decision through the LLM improves correctness but incurs high latency and inference cost, while pre-coded workflow graphs reduce cost but become brittle under unanticipated compound tool failures. We present Self-Healing Router, a fault-tolerant orchestration architecture that treats most agent control-flow decisions as routing rather than reasoning. The system combines (i) parallel health monitors that assign priority scores to runtime conditions such as tool outages and risk signals, and (ii) a cost-weighted tool graph where Dijkstra's algorithm performs deterministic shortest-path routing. When a tool fails mid-execution, its edges are reweighted to infinity and the path is recomputed -- yielding automatic recovery without invoking the LLM. The LLM is reserved exclusively for cases where no feasible path exists, enabling goal demotion or escalation. Prior graph-based tool-use systems (ControlLLM, ToolNet, NaviAgent) focus on tool selection and planning; our contribution is runtime fault tolerance with deterministic recovery and binary observability -- every failure is either a logged reroute or an explicit escalation, never a silent skip. Across 19 scenarios spanning three graph topologies (linear pipeline, dependency DAG, parallel fan-out), Self-Healing Router matches ReAct's correctness while reducing control-plane LLM calls by 93% (9 vs 123 aggregate) and eliminating the silent-failure cases observed in a well-engineered static workflow baseline under compound failures.

Personal AI agents like OpenClaw run with elevated privileges on users' local machines, where a single successful prompt injection can leak credentials, redirect financial transactions, or destroy files. This threat goes well beyond conventional text-level jailbreaks, yet existing safety evaluations fall short: most test models in isolated chat settings, rely on synthetic environments, and do not account for how the agent framework itself shapes safety outcomes. We introduce CLAWSAFETY, a benchmark of 120 adversarial test scenarios organized along three dimensions (harm domain, attack vector, and harmful action type) and grounded in realistic, high-privilege professional workspaces spanning software engineering, finance, healthcare, law, and DevOps. Each test case embeds adversarial content in one of three channels the agent encounters during normal work: workspace skill files, emails from trusted senders, and web pages. We evaluate five frontier LLMs as agent backbones, running 2,520 sandboxed trials across all configurations. Attack success rates (ASR) range from 40\% to 75\% across models and vary sharply by injection vector, with skill instructions (highest trust) consistently more dangerous than email or web content. Action-trace analysis reveals that the strongest model maintains hard boundaries against credential forwarding and destructive actions, while weaker models permit both. Cross-scaffold experiments on three agent frameworks further demonstrate that safety is not determined by the backbone model alone but depends on the full deployment stack, calling for safety evaluation that treats model and framework as joint variables. Code and data will be available at: https://weibowen555.github.io/ClawSafety/.

We introduce a novel self-supervised learning method based on adversarial training. Our objective is to train a discriminator network to distinguish real images from images with synthetic artifacts, and then to extract features from its intermediate layers that can be transferred to other data domains and tasks. To generate images with artifacts, we pre-train a high-capacity autoencoder and then we use a damage and repair strategy: First, we freeze the autoencoder and damage the output of the encoder by randomly dropping its entries. Second, we augment the decoder with a repair network, and train it in an adversarial manner against the discriminator. The repair network helps generate more realistic images by inpainting the dropped feature entries. To make the discriminator focus on the artifacts, we also make it predict what entries in the feature were dropped. We demonstrate experimentally that features learned by creating and spotting artifacts achieve state of the art performance in several benchmarks.

Visual backbones have evolved from Convolutional Neural Networks (CNNs) with local aggregation to Vision Transformers (ViTs) with global interactions, State-Space Models (SSMs) with input-dependent state transitions, and Test-Time Training (TTT) layers that adapt an inner learner while processing an image. Across this progression, visual computation has become increasingly adaptive to each input, yet the rules governing that adaptation remain largely prescribed by the trained backbone. We introduce VisionHOPE, the first generic visual backbone formulated as a self-modifying learning system, in which what the model remembers and how it learns co-evolve within an image. Building on the self-referential construction of Nested Learning (NL), VisionHOPE realizes this co-evolution through five coupled memories that store content, generate key and value representations, and govern learning rate and retention. These memories evolve jointly as visual context accumulates along each scan. However, directly applying the unconstrained self-referential update to a visual backbone leads to instability. We therefore derive a stability-matched step-size control scheme that combines a soft cap on self-referential injection with a spectral clamp on the retained memory transition, and prove that the resulting memory dynamics are non-expansive along each scan. For two-dimensional feature maps, we adapt NL's chunk formulation by aligning chunks with image rows and columns across four directional scans. The proposed VisionHOPE achieves competitive results on ImageNet-1K, COCO, and ADE20K, establishing self-modifying learning systems as a practical foundation for general-purpose visual backbones. The code is available at https://github.com/PSRben/VisionHOPE.

Post-training for large language models (LLMs) is constrained by the high cost of acquiring new knowledge or correcting errors and by the unintended side effects that frequently arise from retraining. To address these issues, we introduce REPAIR (Robust Editing via Progressive Adaptive Intervention and Reintegration), a lifelong editing framework designed to support precise and low-cost model updates while preserving non-target knowledge. REPAIR mitigates the instability and conflicts of large-scale sequential edits through a closed-loop feedback mechanism coupled with dynamic memory management. Furthermore, by incorporating frequent knowledge fusion and enforcing strong locality guards, REPAIR effectively addresses the shortcomings of traditional distribution-agnostic approaches that often overlook unintended ripple effects. Our experiments demonstrate that REPAIR boosts editing accuracy by 10%-30% across multiple model families and significantly reduces knowledge forgetting. This work introduces a robust framework for developing reliable, scalable, and continually evolving LLMs.

Modern top-performing object detectors depend heavily on backbone networks, whose advances bring consistent performance gains through exploring more effective network structures. In this paper, we propose a novel and flexible backbone framework, namely CBNetV2, to construct high-performance detectors using existing open-sourced pre-trained backbones under the pre-training fine-tuning paradigm. In particular, CBNetV2 architecture groups multiple identical backbones, which are connected through composite connections. Specifically, it integrates the high- and low-level features of multiple backbone networks and gradually expands the receptive field to more efficiently perform object detection. We also propose a better training strategy with assistant supervision for CBNet-based detectors. Without additional pre-training of the composite backbone, CBNetV2 can be adapted to various backbones (CNN-based vs. Transformer-based) and head designs of most mainstream detectors (one-stage vs. two-stage, anchor-based vs. anchor-free-based). Experiments provide strong evidence that, compared with simply increasing the depth and width of the network, CBNetV2 introduces a more efficient, effective, and resource-friendly way to build high-performance backbone networks. Particularly, our Dual-Swin-L achieves 59.4% box AP and 51.6% mask AP on COCO test-dev under the single-model and single-scale testing protocol, which is significantly better than the state-of-the-art result (57.7% box AP and 50.2% mask AP) achieved by Swin-L, while the training schedule is reduced by 6times. With multi-scale testing, we push the current best single model result to a new record of 60.1% box AP and 52.3% mask AP without using extra training data. Code is available at https://github.com/VDIGPKU/CBNetV2.

Self-supervised image backbones can be used to address complex 2D tasks (e.g., semantic segmentation, object discovery) very efficiently and with little or no downstream supervision. Ideally, 3D backbones for lidar should be able to inherit these properties after distillation of these powerful 2D features. The most recent methods for image-to-lidar distillation on autonomous driving data show promising results, obtained thanks to distillation methods that keep improving. Yet, we still notice a large performance gap when measuring the quality of distilled and fully supervised features by linear probing. In this work, instead of focusing only on the distillation method, we study the effect of three pillars for distillation: the 3D backbone, the pretrained 2D backbones, and the pretraining dataset. In particular, thanks to our scalable distillation method named ScaLR, we show that scaling the 2D and 3D backbones and pretraining on diverse datasets leads to a substantial improvement of the feature quality. This allows us to significantly reduce the gap between the quality of distilled and fully-supervised 3D features, and to improve the robustness of the pretrained backbones to domain gaps and perturbations.

Large language models (LLMs) have recently shown strong potential for Automated Program Repair (APR), yet most existing approaches remain unimodal and fail to leverage the rich diagnostic signals contained in visual artifacts such as screenshots and control-flow graphs. In practice, many bug reports convey critical information visually (e.g., layout breakage or missing widgets), but directly using such dense visual inputs often causes context loss and noise, making it difficult for MLLMs to ground visual observations into precise fault localization and executable patches. To bridge this semantic gap, we propose SVRepair, a multimodal APR framework with structured visual representation. SVRepair first fine-tunes a vision-language model, Structured Visual Representation (SVR), to uniformly transform heterogeneous visual artifacts into a semantic scene graph that captures GUI elements and their structural relations (e.g., hierarchy), providing normalized, code-relevant context for downstream repair. Building on the graph, SVRepair drives a coding agent to localize faults and synthesize patches, and further introduces an iterative visual-artifact segmentation strategy that progressively narrows the input to bug-centered regions to suppress irrelevant context and reduce hallucinations. Extensive experiments across multiple benchmarks demonstrate state-of-the-art performance: SVRepair achieves 36.47\% accuracy on SWE-Bench M, 38.02\% on MMCode, and 95.12\% on CodeVision, validating the effectiveness of SVRepair for multimodal program repair.

Object detection is a vital task in computer vision and has become an integral component of numerous critical systems. However, state-of-the-art object detectors, similar to their classification counterparts, are susceptible to small adversarial perturbations that can significantly alter their normal behavior. Unlike classification, the robustness of object detectors has not been thoroughly explored. In this work, we take the initial step towards bridging the gap between the robustness of classification and object detection by leveraging adversarially trained classification models. Merely utilizing adversarially trained models as backbones for object detection does not result in robustness. We propose effective modifications to the classification-based backbone to instill robustness in object detection without incurring any computational overhead. To further enhance the robustness achieved by the proposed modified backbone, we introduce two lightweight components: imitation loss and delayed adversarial training. Extensive experiments on the MS-COCO and Pascal VOC datasets are conducted to demonstrate the effectiveness of our proposed approach.

Automated Program Repair (APR) improves software reliability by generating patches for a buggy program automatically. Recent APR techniques leverage deep learning (DL) to build models to learn to generate patches from existing patches and code corpora. While promising, DL-based APR techniques suffer from the abundant syntactically or semantically incorrect patches in the patch space. These patches often disobey the syntactic and semantic domain knowledge of source code and thus cannot be the correct patches to fix a bug. We propose a DL-based APR approach KNOD, which incorporates domain knowledge to guide patch generation in a direct and comprehensive way. KNOD has two major novelties, including (1) a novel three-stage tree decoder, which directly generates Abstract Syntax Trees of patched code according to the inherent tree structure, and (2) a novel domain-rule distillation, which leverages syntactic and semantic rules and teacher-student distributions to explicitly inject the domain knowledge into the decoding procedure during both the training and inference phases. We evaluate KNOD on three widely-used benchmarks. KNOD fixes 72 bugs on the Defects4J v1.2, 25 bugs on the QuixBugs, and 50 bugs on the additional Defects4J v2.0 benchmarks, outperforming all existing APR tools.

While Large Language Models have greatly advanced automated issue resolution, existing agent-based methods exhibit a fundamental limitation in their insufficient exploration of repair strategies. This insufficiency manifests in two key aspects. First, the exploration of multiple potential edit locations is limited. Second, the exploration of repair attempts at each location is also insufficient. To address these challenges, we present PhoenixRepair, a multi-agent framework that systematically explores multiple candidate edit locations and performs iterative reflection and refinement on patch generation, thereby expanding the search space of repair strategies. Our framework begins with multi-location sampling, optionally augmented with graph-based localization information for difficult tasks, followed by iterative reflection and refinement to generate better patches, culminating in final-round generation guided by distilled insights from all historical attempts. Experiments on SWE-bench-Verified demonstrate that PhoenixRepair achieves the largest relative improvement of 7.8\% over SWE-agent under DeepSeek-V3.1, and attains the highest resolved rate of 76.0\% Pass@1 under MiniMax-M2.5. Meanwhile, it achieves higher fault localization accuracy than existing approaches. Our code is available at https://github.com/DeepSoftwareAnalytics/PhoenixRepair.

Agent Skills package reusable natural language procedures with executable resources, enabling software agents to acquire task specific capabilities without model adaptation. Automatically generating such Skills can improve task performance, yet evaluating a candidate solely from its artifact or final task outcome leaves unresolved which actions the equipped agent will perform and which side effects those actions will produce. We present TRUSS, an evidence guided framework for generating functionally effective and safety reliable Agent Skills. TRUSS first inspects functional claims against source and domain evidence while evaluating the complete artifact under nine predefined safety properties. Candidates admitted by this static gate are loaded by a shadow agent inside a Controllable Execution Environment, where brokered tools expose requested actions to policy enforcement and record their results as provenance preserving execution traces. Functional failures and property violations are linked back to the responsible Skill content and used to guide iterative refinement. We evaluate TRUSS on 168 SkillInject artifacts, 155 SkillSafetyBench cases, and all 187 tasks in SkillGenBench. TRUSS achieves 100.00\% precision and recall in vulnerability detection. Repair reduces attack success from 38.71\% to 19.35\% with GPT 5.5 and from 46.45\% to 29.68\% with GPT 5.4, with zero attack regression. For Skill generation, TRUSS raises task effectiveness from 17.11\% without Skills to 52.94\%, while increasing the benchmark Security rate from 50.80\% to 100.00\%. These results show that execution evidence can expose behavioral failures missed by artifact inspection and can guide Skill generation toward jointly verified functional and safety outcomes.

Large Language Models (LLMs) often generate code with subtle but critical bugs, especially for complex tasks. Existing automated repair methods typically rely on superficial pass/fail signals, offering limited visibility into program behavior and hindering precise error localization. In addition, without a way to learn from prior failures, repair processes often fall into repetitive and inefficient cycles. To overcome these challenges, we present TraceCoder, a collaborative multi-agent framework that emulates the observe-analyze-repair process of human experts. The framework first instruments the code with diagnostic probes to capture fine-grained runtime traces, enabling deep insight into its internal execution. It then conducts causal analysis on these traces to accurately identify the root cause of the failure. This process is further enhanced by a novel Historical Lesson Learning Mechanism (HLLM), which distills insights from prior failed repair attempts to inform subsequent correction strategies and prevent recurrence of similar mistakes. To ensure stable convergence, a Rollback Mechanism enforces that each repair iteration constitutes a strict improvement toward the correct solution. Comprehensive experiments across multiple benchmarks show that TraceCoder achieves up to a 34.43\% relative improvement in Pass@1 accuracy over existing advanced baselines. Ablation studies verify the significance of each system component, with the iterative repair process alone contributing a 65.61\% relative gain in accuracy. Furthermore, TraceCoder significantly outperforms leading iterative methods in terms of both accuracy and cost-efficiency.

Structural magnetic resonance imaging (MRI) images are sometimes corrupted over a contiguous set of slices, where acquisition, motion, hardware, or reconstruction effects leave a single slice or short interval inconsistent with its neighbors while the rest of the image remains usable. Such localized corruption can bias downstream morphometric analysis, yet discarding or reacquiring an otherwise usable image is costly. We formulate this as an image restoration problem: given the location of the affected interval, reconstruct those slices from the surrounding anatomical and imaging context. We propose SliceBridge, a framework for restoring corrupted slice intervals in T1-weighted MRI using rectified flow matching conditioned on the surrounding intact slices and their relative slice positions. Through-plane consistency is encouraged by coupling the slices within the interval through interval-correlated initial noise, a shared flow time, and synchronized sampling. The restored interval is then inserted back, leaving all other slices unchanged. We trained and validated the model on 9,877 T1-weighted brain MRI volumes from four datasets and evaluated it on 581 external subjects using clean interval withholding and controlled corruptions. Compared with a matched model that reconstructed target slices independently, SliceBridge reduced error in slice-to-slice changes within repaired intervals by 32.9%-41.3% across interval lengths and achieved higher SSIM at every interval length. In controlled-corruption cases, SliceBridge reduced the median error in regional brain volume estimates produced by a downstream segmentation model from 1.95% in corrupted volumes to 1.05%.

Given a robust model trained to be resilient to one or multiple types of distribution shifts (e.g., natural image corruptions), how is that "robustness" encoded in the model weights, and how easily can it be disentangled and/or "zero-shot" transferred to some other models? This paper empirically suggests a surprisingly simple answer: linearly - by straightforward model weight arithmetic! We start by drawing several key observations: (1)assuming that we train the same model architecture on both a clean dataset and its corrupted version, resultant weights mostly differ in shallow layers; (2)the weight difference after projection, which we call "Robust Weight Signature" (RWS), appears to be discriminative and indicative of different corruption types; (3)for the same corruption type, the RWSs obtained by one model architecture are highly consistent and transferable across different datasets. We propose a minimalistic model robustness "patching" framework that carries a model trained on clean data together with its pre-extracted RWSs. In this way, injecting certain robustness to the model is reduced to directly adding the corresponding RWS to its weight. We verify our proposed framework to be remarkably (1)lightweight. since RWSs concentrate on the shallowest few layers and we further show they can be painlessly quantized, storing an RWS is up to 13 x more compact than storing the full weight copy; (2)in-situ adjustable. RWSs can be appended as needed and later taken off to restore the intact clean model. We further demonstrate one can linearly re-scale the RWS to control the patched robustness strength; (3)composable. Multiple RWSs can be added simultaneously to patch more comprehensive robustness at once; and (4)transferable. Even when the clean model backbone is continually adapted or updated, RWSs remain as effective patches due to their outstanding cross-dataset transferability.

Large-scale supervised pretraining is rapidly reshaping 3D medical image segmentation. However, existing efforts focus primarily on increasing dataset size and overlook the question of whether the backbone network is an effective representation learner at scale. In this work, we address this gap by revisiting ConvNeXt-based architectures for volumetric segmentation and introducing MedNeXt-v2, a compound-scaled 3D ConvNeXt that leverages improved micro-architecture and data scaling to deliver state-of-the-art performance. First, we show that routinely used backbones in large-scale pretraining pipelines are often suboptimal. Subsequently, we use comprehensive backbone benchmarking prior to scaling and demonstrate that stronger from scratch performance reliably predicts stronger downstream performance after pretraining. Guided by these findings, we incorporate a 3D Global Response Normalization module and use depth, width, and context scaling to improve our architecture for effective representation learning. We pretrain MedNeXt-v2 on 18k CT volumes and demonstrate state-of-the-art performance when fine-tuning across six challenging CT and MR benchmarks (144 structures), showing consistent gains over seven publicly released pretrained models. Beyond improvements, our benchmarking of these models also reveals that stronger backbones yield better results on similar data, representation scaling disproportionately benefits pathological segmentation, and that modality-specific pretraining offers negligible benefit once full finetuning is applied. In conclusion, our results establish MedNeXt-v2 as a strong backbone for large-scale supervised representation learning in 3D Medical Image Segmentation. Our code and pretrained models are made available with the official nnUNet repository at: https://www.github.com/MIC-DKFZ/nnUNet

Industrial CAD workflows require robust, generalizable 3D geometric representations supporting accuracy and explainability. We introduce Shape, a self-supervised foundation model converting surface meshes into dense per-token embeddings. Shape combines a structured 3D latent grid, a multi-scale geometry-aware tokenizer (MAGNO) with cross-attention, and a transformer processor using grouped-query attention and RMSNorm. A learned reconstruction prior enables per-region attribution for explainable predictions. Pretraining uses masked-token reconstruction of normalized geometry statistics and multi-resolution contrastive consistency. The 10.9M-parameter backbone is pretrained on 61,052 CAD meshes from Thingi10K, MFCAD, and Fusion360. On a held-out split of 2,983 meshes, Shape achieves reconstruction R2 = 0.729 and 98.1% top-1 retrieval under the Wang-Isola protocol, with near-zero reconstruction train/val gap (contrastive scores use a larger evaluation pool). A 2x2 ablation on loss type and target-space normalization shows per-dimension normalization is critical: without it, performance collapses (R2 < 0.14, top-1 < 88%); with it, both losses succeed (R2 > 0.70, top-1 > 96%). Smooth-L1 offers secondary stability. Code, embeddings, and an interactive demo are released at https://github.com/simd-ai/shape.

Diffusion-based text-to-image models have demonstrated impressive achievements in diversity and aesthetics but struggle to generate images with legible visual texts. Existing backbone models have limitations such as misspelling, failing to generate texts, and lack of support for Chinese text, but their development shows promising potential. In this paper, we propose a series of methods, aiming to empower backbone models to generate visual texts in English and Chinese. We first conduct a preliminary study revealing that Byte Pair Encoding (BPE) tokenization and the insufficient learning of cross-attention modules restrict the performance of the backbone models. Based on these observations, we make the following improvements: (1) We design a mixed granularity input strategy to provide more suitable text representations; (2) We propose to augment the conventional training objective with three glyph-aware training losses, which enhance the learning of cross-attention modules and encourage the model to focus on visual texts. Through experiments, we demonstrate that our methods can effectively empower backbone models to generate semantic relevant, aesthetically appealing, and accurate visual text images, while maintaining their fundamental image generation quality.

Vision-Language-Action (VLA) policies achieve strong performance in robotic manipulation but remain brittle once execution deviates from nominal trajectories. We propose CARE (Corrective Atomic Robotic Execution), a framework that improves recovery by learning from failures encountered during execution. Instead of generating corrective data from manually designed or random perturbations, CARE collects failed rollouts, models stage-conditioned post-failure deviations, and uses the resulting empirical distributions to synthesize representative failure states and corrective demonstrations. At inference time, CARE combines stage-wise planning with physically grounded 3D monitoring to trigger atomic adjustments or re-operations while preserving task progress. We further introduce the Failure State Recovery Benchmark (FSR-Bench), which evaluates recovery from intermediate failure states under local deviations and structural anomalies. Experiments across multiple VLA backbones, simulation benchmarks, and real-world dual-arm tasks show consistent improvements, with average task-success gains of 14.5 points in simulation and 15.9 points in the real world. Code, models, and data are available at https://github.com/xiaojunlan/care

Current learning-based Automated Vulnerability Repair (AVR) approaches, while promising, often fail to generalize effectively in real-world scenarios. Our diagnostic analysis reveals three fundamental weaknesses in state-of-the-art AVR approaches: (1) limited cross-repository generalization, with performance drops on unseen codebases; (2) inability to capture long-range dependencies, causing a performance degradation on complex, multi-hunk repairs; and (3) over-reliance on superficial lexical patterns, leading to significant performance drops on vulnerabilities with minor syntactic variations like variable renaming. To address these limitations, we propose SeCuRepair, a semantics-aligned, curriculum-driven, and reasoning-enhanced framework for vulnerability repair. At its core, SeCuRepair adopts a reason-then-edit paradigm, requiring the model to articulate why and how a vulnerability should be fixed before generating the patch. This explicit reasoning enforces a genuine understanding of repair logic rather than superficial memorization of lexical patterns. SeCuRepair also moves beyond traditional supervised fine-tuning and employs semantics-aware reinforcement learning, rewarding patches for their syntactic and semantic alignment with the oracle patch rather than mere token overlap. Complementing this, a difficulty-aware curriculum progressively trains the model, starting with simple fixes and advancing to complex, multi-hunk coordinated edits. We evaluate SeCuRepair on strict, repository-level splits of BigVul and newly crafted PrimeVul_AVR datasets. SeCuRepair significantly outperforms all baselines, surpassing the best-performing baselines by 34.52% on BigVul and 31.52% on PrimeVulAVR in terms of CodeBLEU, respectively. Comprehensive ablation studies further confirm that each component of our framework contributes to its final performance.

Long-horizon manipulation is partially observable: the information needed to choose the next action may appear only in observations from minutes earlier. Existing memory mechanisms: retrieval banks, learned compressors, recurrent states must decide what to keep from the past before knowing what a future decision will require. This was motivated by the assumption that minute-scale history is too large to process directly, which modern VLM backbones no longer make true. In this work, we introduce SimpleMemVLA, a VLA without a dedicated memory module. It keeps the sampled history intact and passes it to the backbone in the timestamped video format the backbone was pretrained to process; the hidden states of a generated sub-task then form the only channel from history to a standard flow-matching action head. Since consecutive decisions share most of their history, prefilling the shared prefix during action execution keeps latency close to a single-frame VLA. SimpleMemVLA sets a new state of the art on four memory benchmarks without cost on general-purpose control. Holding the backbone and training setup fixed, it outperforms retrieval, compression and recurrent-state mechanisms by a wide margin, and causal interventions confirm that the policy genuinely reads its history. Code available at https://github.com/wadeKeith/SimpleMemVLA

Automated program repair (APR) aims to fix software bugs without human intervention and template-based APR has been widely investigated with promising results. However, it is challenging for template-based APR to select the appropriate donor code, which is an important repair ingredient for generating candidate patches. Inappropriate donor code may cause plausible but incorrect patch generation even with correct fix patterns, limiting the repair performance. In this paper, we aim to revisit template-based APR, and propose GAMMA, to directly leverage large pre-trained language models for donor code generation. Our main insight is that instead of retrieving donor code in the local buggy file, we can directly predict the correct code tokens based on the context code snippets and repair patterns by a cloze task. Specifically, (1) GAMMA revises a variety of fix templates from state-of-the-art template-based APR techniques (i.e., TBar) and transforms them into mask patterns. (2) GAMMA adopts a pre-trained language model to predict the correct code for masked code as a fill-in-the-blank task. The experimental results demonstrate that GAMMA correctly repairs 82 bugs on Defects4J-v1.2, which achieves 20.59\% (14 bugs) and 26.15\% (17 bugs) improvement over the previous state-of-the-art template-based approach TBar and learning-based one Recoder. Furthermore, GAMMA repairs 45 bugs and 22 bugs from the additional Defects4J-v2.0 and QuixBugs, indicating the generalizability of GAMMA in addressing the dataset overfitting issue. We also prove that adopting other pre-trained language models can provide substantial advancement, e.g., CodeBERT-based and ChatGPT-based GAMMA is able to fix 80 and 67 bugs on Defects4J-v1.2, indicating the scalability of GAMMA. Overall, our study highlights the promising future of adopting pre-trained models to generate correct patches on top of fix patterns.

Deep learning approaches have provided state-of-the-art performance in many applications by relying on large and overparameterized neural networks. However, such networks have been shown to be very brittle and are difficult to deploy on resource-limited platforms. Model pruning, i.e., reducing the size of the network, is a widely adopted strategy that can lead to a more robust and compact model. Many heuristics exist for model pruning, but empirical studies show that some heuristics improve performance whereas others can make models more brittle or have other side effects. This work aims to shed light on how different pruning methods alter the network's internal feature representation and the corresponding impact on model performance. To facilitate a comprehensive comparison and characterization of the high-dimensional model feature space, we introduce a visual geometric analysis of feature representations. We decomposed and evaluated a set of critical geometric concepts from the common adopted classification loss, and used them to design a visualization system to compare and highlight the impact of pruning on model performance and feature representation. The proposed tool provides an environment for in-depth comparison of pruning methods and a comprehensive understanding of how model response to common data corruption. By leveraging the proposed visualization, machine learning researchers can reveal the similarities between pruning methods and redundant in robustness evaluation benchmarks, obtain geometric insights about the differences between pruned models that achieve superior robustness performance, and identify samples that are robust or fragile to model pruning and common data corruption to model pruning and data corruption but also obtain insights and explanations on how some pruned models achieve superior robustness performance.

Most programmers make mistakes when writing code. Some of these mistakes are small and require few edits to the original program -- a class of errors recently termed last mile mistakes. These errors break the flow for experienced developers and can stump novice programmers. Existing automated repair techniques targeting this class of errors are language-specific and do not easily carry over to new languages. Transferring symbolic approaches requires substantial engineering and neural approaches require data and retraining. We introduce RING, a multilingual repair engine powered by a large language model trained on code (LLMC) such as Codex. Such a multilingual engine enables a flipped model for programming assistance, one where the programmer writes code and the AI assistance suggests fixes, compared to traditional code suggestion technology. Taking inspiration from the way programmers manually fix bugs, we show that a prompt-based strategy that conceptualizes repair as localization, transformation, and candidate ranking, can successfully repair programs in multiple languages with minimal effort. We present the first results for such a multilingual repair engine by evaluating on 6 different languages and comparing performance to language-specific repair engines. We show that RING can outperform language-specific repair engines for three of these languages.

Automated pavement distress assessment requires more than image-level classification or coarse bounding box detection, demanding precise localization of thin, branching, and irregular cracks to achieve the geometric precision necessary for maintenance-relevant quantification. This paper presents a vision-based pavement distress analysis system based on Mask R-CNN instance segmentation and evaluates it on UWGB-StreetCrack, a custom field-collected roadway image dataset acquired with a vehicle-mounted smartphone and manually annotated with polygon labels for longitudinal cracks, transverse cracks, alligator cracks, and potholes. Five Detectron2-based Mask R-CNN backbone variants were considered under a consistent fine-tuning protocol. The best-performing model, Mask R-CNN with a ResNet-101 FPN backbone, achieved 84.23% precision, 90.04% recall, and an F1 score of 87.04% under the project-specific bounding-box matching protocol. The same model produced an aggregate predicted crack-area fraction of 2.164%, closely matching the 2.170% ground-truth crack-area fraction. To contextualize the segmentation system against a detector-oriented alternative, a CSPDarknet53-based YOLO detector was also adapted and retrained on the dataset, reaching 27.5% precision and 20.7% recall on the validation protocol. The results show that instance segmentation is a practical direction for field pavement imagery and aggregate crack-area estimation, while also exposing open challenges in annotation consistency, class imbalance, confounder rejection, and mask-level benchmarking.

In contrast to numerous NLP and 2D vision foundational models, learning a 3D foundational model poses considerably greater challenges. This is primarily due to the inherent data variability and diversity of downstream tasks. In this paper, we introduce a novel universal 3D pre-training framework designed to facilitate the acquisition of efficient 3D representation, thereby establishing a pathway to 3D foundational models. Considering that informative 3D features should encode rich geometry and appearance cues that can be utilized to render realistic images, we propose to learn 3D representations by differentiable neural rendering. We train a 3D backbone with a devised volumetric neural renderer by comparing the rendered with the real images. Notably, our approach seamlessly integrates the learned 3D encoder into various downstream tasks. These tasks encompass not only high-level challenges such as 3D detection and segmentation but also low-level objectives like 3D reconstruction and image synthesis, spanning both indoor and outdoor scenarios. Besides, we also illustrate the capability of pre-training a 2D backbone using the proposed methodology, surpassing conventional pre-training methods by a large margin. For the first time, PonderV2 achieves state-of-the-art performance on 11 indoor and outdoor benchmarks, implying its effectiveness. Code and models are available at https://github.com/OpenGVLab/PonderV2.

3D reassembly is a challenging spatial intelligence task with broad applications across scientific domains. While large-scale synthetic datasets have fueled promising learning-based approaches, their generalizability to different domains is limited. Critically, it remains uncertain whether models trained on synthetic datasets can generalize to real-world fractures where breakage patterns are more complex. To bridge this gap, we propose GARF, a generalizable 3D reassembly framework for real-world fractures. GARF leverages fracture-aware pretraining to learn fracture features from individual fragments, with flow matching enabling precise 6-DoF alignments. At inference time, we introduce one-step preassembly, improving robustness to unseen objects and varying numbers of fractures. In collaboration with archaeologists, paleoanthropologists, and ornithologists, we curate Fractura, a diverse dataset for vision and learning communities, featuring real-world fracture types across ceramics, bones, eggshells, and lithics. Comprehensive experiments have shown our approach consistently outperforms state-of-the-art methods on both synthetic and real-world datasets, achieving 82.87\% lower rotation error and 25.15\% higher part accuracy. This sheds light on training on synthetic data to advance real-world 3D puzzle solving, demonstrating its strong generalization across unseen object shapes and diverse fracture types.

Large foundation models have emerged in the last years and are pushing performance boundaries for a variety of tasks. Training or even finetuning such models demands vast datasets and computational resources, which are often scarce and costly. Adaptation methods provide a computationally efficient solution to address these limitations by allowing such models to be finetuned on small amounts of data and computing power. This is achieved by appending new trainable modules to frozen backbones with only a fraction of the trainable parameters and fitting only these modules on novel tasks. Recently, the VeRA adapter was shown to excel in parameter-efficient adaptations by utilizing a pair of frozen random low-rank matrices shared across all layers. In this paper, we propose PVeRA, a probabilistic version of the VeRA adapter, which modifies the low-rank matrices of VeRA in a probabilistic manner. This modification naturally allows handling inherent ambiguities in the input and allows for different sampling configurations during training and testing. A comprehensive evaluation was performed on the VTAB-1k benchmark and seven adapters, with PVeRA outperforming VeRA and other adapters. Our code for training models with PVeRA and benchmarking all adapters is available https://github.com/leofillioux/pvera.

Existing 3D editing methods rely on computationally intensive scene-by-scene iterative optimization and suffer from multi-view inconsistency. We propose an effective and feed-forward 3D editing framework based on the TRELLIS generative backbone, capable of modifying 3D models from a single editing view. Our framework addresses two key issues: adapting training-free 2D editing to structured 3D representations, and overcoming the bottleneck of appearance fidelity in compressed 3D features. To ensure geometric consistency, we introduce Voxel FlowEdit, an edit-driven flow in the sparse voxel latent space that achieves globally consistent 3D deformation in a single pass. To restore high-fidelity details, we develop a normal-guided single to multi-view generation module as an external appearance prior, successfully recovering high-frequency textures. Experiments demonstrate that our method enables fast, globally consistent, and high-fidelity 3D model editing.

As neural theorem provers become increasingly agentic, the ability to interpret and act on compiler feedback is critical. However, existing Lean datasets consist almost exclusively of correct proofs, offering little supervision for understanding and repairing failures. We study Lean proof repair as a supervised learning problem: given an erroneous proof and compiler feedback, predict both a corrected proof and a natural-language diagnosis grounded in the same feedback. We introduce APRIL (Automated Proof Repair in Lean), a dataset of 260,000 supervised tuples pairing systematically generated proof failures with compiler diagnostics and aligned repair and explanation targets. Training language models on APRIL substantially improves repair accuracy and feedback-conditioned reasoning; in our single-shot repair evaluation setting, a finetuned 4B-parameter model outperforms the strongest open-source baseline. We view diagnostic-conditioned supervision as a complementary training signal for feedback-using provers. Our dataset is available at https://huggingface.co/datasets/uw-math-ai/APRIL{this link}.

Vision language models (VLMs) have seen growing adoption in recent years, but many still struggle with basic spatial reasoning errors. We hypothesize that this is due to VLMs adopting pre-trained vision backbones, specifically vision transformers (ViTs) trained with image-level supervision and minimal inductive biases. Such models may fail to encode the class contents at each position in the image, and our goal is to resolve this by ensuring that the vision backbone effectively captures both local and global image semantics. Our main insight is that we do not require new supervision to learn this capability -- pre-trained models contain significant knowledge of local semantics that we can extract and use for scalable self-supervision. We propose a new efficient post-training stage for ViTs called locality alignment and a novel fine-tuning procedure called MaskEmbed that uses a masked reconstruction loss to learn semantic contributions for each image patch. We first evaluate locality alignment with a vision-only benchmark, finding that it improves a model's performance at a patch-level semantic segmentation task, especially for strong backbones trained with image-caption pairs (e.g., CLIP and SigLIP). We then train a series of VLMs with and without locality alignment, and show that locality-aligned backbones improve performance across a range of benchmarks, particularly ones that involve spatial understanding (e.g., RefCOCO, OCID-Ref, TallyQA, VSR, AI2D). Overall, we demonstrate that we can efficiently learn local semantic extraction via a locality alignment stage, and that this procedure complements existing VLM training recipes that use off-the-shelf vision backbones.

Semi-supervised semantic segmentation (SSSS) has long turned on one question, which pseudo-labels to trust, and answered it with ever more careful confidence filtering. Foundation backbones change the regime: with a DINOv2 teacher a strict threshold already retains a measured 98%-clean pseudo-label set, so the accuracy that remains lives not in the filter but in how the embedding space is structured by class. We propose PixCon, a clean-positive pixel-contrastive framework. PixCon maintains a per-class memory bank that admits only labeled pixels the student already classifies correctly, guaranteeing a contamination-free positive set (ρ_F=0) by construction, unlike prior contrastive SSSS banks (ReCo, U^2PL) built from confidence-filtered pseudo-labels. It is a single branch over a consistency backbone, adds no inference-time parameters, and needs no bank-specific threshold. A first-order analysis of the supervised-InfoNCE gradient explains why contamination hurts: its false-positive term scales as ρ_F/(1-ρ_F), which we measure (0.018 on Pascal, 0.106 on ADE20K) rather than assume. Across Pascal VOC, Cityscapes, and ADE20K, PixCon matches or improves a strong DINOv2-based UniMatch V2 baseline in a compute-matched one-switch protocol: it improves every Pascal-1/8 seed (a per-seed gain of about +0.2 mIoU) and its three-seed mean reaches 87.90, the published UniMatch V2-B figure. Because contamination is already rare under foundation-model teachers, our analysis indicates the ρ_F=0 guarantee acts chiefly as robustness as teachers weaken, while the accuracy gain comes from cleaner positive supervision, making clean-positive contrast a robust, low-cost default for foundation-model SSSS.

Program repair techniques offer cost-saving benefits for debugging within software development and programming education scenarios. With the proven effectiveness of Large Language Models (LLMs) in code-related tasks, researchers have explored their potential for program repair. However, it is crucial to recognize that existing repair benchmarks may have influenced LLM training data, potentially causing data leakage. To evaluate LLMs' realistic repair capabilities, (1) we introduce an extensive, non-crawled benchmark, referred to as TutorCode, comprising 1,239 C++ defect codes and associated information such as tutor guidance, solution description, failing test cases, and the corrected code. Our work assesses the repair performance of 12 LLMs on TutorCode, measuring repair correctness (TOP-5 and AVG-5) and patch precision (RPSR). (2) We then provide a comprehensive investigation into which types of extra information can help LLMs improve their performance in repairing defects. Among these types, tutor guidance was found to be the most effective information in enhancing LLM repair capabilities. To fully harness LLMs' conversational capabilities and the benefits of augmented information, (3) we introduce a novel conversational semi-automatic repair framework CREF assisting human tutor. It demonstrates a remarkable AVG-5 improvement of 17.2%-24.6% compared to the baseline, achieving an impressive AVG-5 of 76.6% when utilizing GPT-4. These results highlight the potential for enhancing LLMs' repair capabilities through interactions with tutors and historical conversations involving incorrect responses. The successful application of CREF in a real-world educational setting demonstrates its effectiveness in reducing tutors' workload and improving students' learning experience, while also showcasing its promise for facilitating other software engineering tasks, such as code review.

This work investigates a simple yet powerful dense prediction task adapter for Vision Transformer (ViT). Unlike recently advanced variants that incorporate vision-specific inductive biases into their architectures, the plain ViT suffers inferior performance on dense predictions due to weak prior assumptions. To address this issue, we propose the ViT-Adapter, which allows plain ViT to achieve comparable performance to vision-specific transformers. Specifically, the backbone in our framework is a plain ViT that can learn powerful representations from large-scale multi-modal data. When transferring to downstream tasks, a pre-training-free adapter is used to introduce the image-related inductive biases into the model, making it suitable for these tasks. We verify ViT-Adapter on multiple dense prediction tasks, including object detection, instance segmentation, and semantic segmentation. Notably, without using extra detection data, our ViT-Adapter-L yields state-of-the-art 60.9 box AP and 53.0 mask AP on COCO test-dev. We hope that the ViT-Adapter could serve as an alternative for vision-specific transformers and facilitate future research. The code and models will be released at https://github.com/czczup/ViT-Adapter.

Modern software projects depend on third-party libraries that evolve continuously, introducing breaking API changes that prevent client code from compiling after a dependency update. When the same library update breaks multiple projects, existing repair approaches generate project-specific patches that cannot be reused, requiring each affected project to be repaired independently. We present BigBag, an agentic framework that generates fixing transformations: structured, executable programs that encode the repair logic at the API level and transfer to any client broken by the same update. We evaluate BigBag on 157 compilation failure breaking dependency updates from the BUMP benchmark, across eight configurations combining four large language models and two AST transformation engines (Spoon and JavaParser). The best configuration achieves a compilable transformation rate of 94.3% and a fix rate of 78.6%. Generated transformations transfer across projects, achieving a cross-project fix rate of 33.3% overall and 80% or above for breaking updates where all clients invoke the affected API element uniformly. These results show that agentic generation of reusable fixing transformations is a viable approach to scalable repair of breaking updates.

Vision-language models encode continuous geometry that their text pathway fails to express: a 6,000-parameter linear probe extracts hand joint angles at 6.1 degrees MAE from frozen features, while the best text output achieves only 20.0 degrees -- a 3.3x bottleneck. LoRA fine-tuning (r=16, 2,000 images) narrows this gap to 6.5 degrees, providing evidence for a pathway-training deficit rather than a representational one. Training objective determines accuracy more than architecture: five encoders spanning self-supervised, contrastive, and hybrid paradigms converge to statistically equivalent accuracy (R^2 approximately 0.55, TOST-equivalent at delta=0.03) despite sharing as little as CKA=0.41 representational similarity -- functional convergence without representational convergence. Autoregressive generation damages geometric fidelity, but the damage originates in the generation process, not in language alignment: Qwen2.5-VL's LLM layers actually improve probe accuracy over its raw vision encoder. Layer-wise analysis reveals a universal mid-network accuracy peak across all architectures, with attention heads in layers 18-22 carrying disproportionate geometric signal. These findings enable a single frozen backbone to function as a multi-task geometric sensor through lightweight probes, without fine-tuning or text generation.

In medical imaging, it is common to use learned perceptual image patch similarity (LPIPS) to compare images semantically in feature space. Although backbones pretrained on natural images are widely used for LPIPS computation, B-mode ultrasound images possess distinct speckle patterns and acoustic-specific image statistics that are fundamentally different from natural images and even from other images in radiology. Consequently, we propose that domain-specific models are needed to measure perceptual similarity in ultrasound data, a finding which is not necessarily the case for other imaging modalities. We compare LPIPS metrics across downstream tasks like classification, segmentation and reconstruction using natural image, medical generalist and ultrasound backbone models and show that selection of LPIPS backbone is a non-trivial design choice. In particular, the ultrasound backbone models were more correlated with downstream performance of supervised models than classical and natural image models, and optimization of the LPIPS loss with an ultrasound backbone achieved a strong balance between reconstruction quality and realism. Our code is available at https://github.com/talg2324/UltraPIPS and introduces the UltraPIPS library, a set of LPIPS metrics based on the open-source foundation models analyzed in this paper.

Millions of open-source projects with numerous bug fixes are available in code repositories. This proliferation of software development histories can be leveraged to learn how to fix common programming bugs. To explore such a potential, we perform an empirical study to assess the feasibility of using Neural Machine Translation techniques for learning bug-fixing patches for real defects. First, we mine millions of bug-fixes from the change histories of projects hosted on GitHub, in order to extract meaningful examples of such bug-fixes. Next, we abstract the buggy and corresponding fixed code, and use them to train an Encoder-Decoder model able to translate buggy code into its fixed version. In our empirical investigation we found that such a model is able to fix thousands of unique buggy methods in the wild. Overall, this model is capable of predicting fixed patches generated by developers in 9-50% of the cases, depending on the number of candidate patches we allow it to generate. Also, the model is able to emulate a variety of different Abstract Syntax Tree operations and generate candidate patches in a split second.

Semantic-ID mappings are reusable interfaces between item tokenizers and generative recommenders, yet released mappings rarely state whether they are coherent, what structure they expose, how generated paths resolve, or what must be revalidated after a refresh. SIDScope is a source-traced diagnostic resource for these decisions. It normalizes item-to-code artifacts, verifies provenance and joins, profiles mapping structure, compares paired revisions, and accounts for path-to-item outcomes in generated traces. Across nine source-traced tokenizer exports from seven families on Amazon and Yelp data - eight executable routes plus one auditable snapshot - SIDScope reveals that interface health is multi-signal rather than scalar. Its central finding is mechanism-conditional: prefix alignment strongly tracks held-out candidate exposure when retrieval consumes SID prefixes, then weakens as scoring becomes prefix-independent. Trained trace accounting exposes a second hidden gap: a valid target path can survive without uniquely retrieving the target item by 1.2-3.0 percentage points. A refresh case establishes a third: repairing the mapping does not by itself restore an inherited generator; model reuse requires a separate handoff check. The package provides frozen evidence summaries, conformance reports, trace labels, table builders, and CPU-only verifiers. It supports decisions about artifact readiness, interface risks, and revalidation before model reuse.

Transformer-based 3D reconstruction has emerged as a powerful paradigm for recovering geometry and appearance from multi-view observations, offering strong performance across challenging visual conditions. As these models scale to larger backbones and higher-resolution inputs, improving their efficiency becomes increasingly important for practical deployment. However, modern 3D transformer pipelines face two coupled challenges: dense multi-view attention creates substantial token-mixing overhead, and low-precision execution can destabilize geometry-sensitive representations and degrade depth, pose, and 3D consistency. To address the first challenge, we propose Lite3R, a model-agnostic teacher-student framework that replaces dense attention with Sparse Linear Attention to preserve important geometric interactions while reducing attention cost. To address the second challenge, we introduce a parameter-efficient FP8-aware quantization-aware training (FP8-aware QAT) strategy with partial attention distillation, which freezes the vast majority of pretrained backbone parameters and trains only lightweight linear-branch projection layers, enabling stable low-precision deployment while retaining pretrained geometric priors. We further evaluate Lite3R on two representative backbones, VGGT and DA3-Large, over BlendedMVS and DTU64, showing that it substantially reduces latency (1.7-2.0x) and memory usage (1.9-2.4x) while preserving competitive reconstruction quality overall. These results demonstrate that Lite3R provides an effective algorithm-system co-design approach for practical transformer-based 3D reconstruction. Code: https://github.com/AIGeeksGroup/Lite3R. Website: https://aigeeksgroup.github.io/Lite3R.

Commercial design platforms increasingly edit documents through large language model (LLM) agents, but two practical problems block reliable deployment: legacy document formats expose only flat, absolutely positioned elements, so agents must recompute coordinates and routinely break layouts; and design has no unique ground truth, so diff-against-reference metrics penalize valid-but-different outputs. We present ACE, an agentic canvas editor over a hierarchical scene-graph with a presentation-specialized action space (98 tools), paired with CARE, a content-aware router that feeds the agent only the relevant slice of each deck (avg.\ sim89\% input-token reduction), and a self-correction loop driven by a ground-truth-free instruction-following (IF) judge whose natural-language critique is fed back as the next-turn instruction. With a fixed backbone, a scene-graph editor in a single turn already matches a same-backbone agentic HTML pipeline that iterates internally; adding self-correction lifts ACE significantly above it on instruction following (IF 4.23 vs.\ 3.81 on the full 94-task benchmark, paired p{=}.010, replicated by an out-of-loop judge) at 1.75times the speed and sim44\% lower cost. VQ means are statistically indistinguishable, but 26 blind raters prefer ACE overall (58.7\% decisive win-rate) and prefer the self-corrected output 81\% of the time; the ranking is invariant across three judge families, and out-of-loop judges retain two-thirds of the self-correction gain, bounding circularity. 66\% of cases halt after one pass, and a strict-peak rollback removes every observed regression.

Software vulnerabilities are increasing at an alarming rate. However, manual patching is both time-consuming and resource-intensive, while existing automated vulnerability repair (AVR) techniques remain limited in effectiveness. Recent advances in large language models (LLMs) have opened a new paradigm for AVR, demonstrating remarkable progress. To examine the capability of LLMs in AVR, several vulnerability benchmarks have been proposed recently. However, they still suffer from key limitations of outdated vulnerabilities, limited language coverage, unreliable patch validation, and insufficient reproducibility. To overcome these challenges, we introduce PATCHEVAL, a multilingual benchmark for Go, JavaScript, and Python, languages for which existing benchmarks remain unexplored. PATCHEVAL curates a dataset of 1,000 vulnerabilities drawn from CVEs reported between 2015 and 2025, covering 65 distinct CWEs. A subset of 230 CVEs is further equipped with runtime sandbox environments, enabling patch verification through both security tests and functionality tests. To provide a systematic comparison of LLM-based vulnerability repair, we evaluate a series of state-of-the-art LLMs and agents, presenting an in-depth analysis that empirically yields key insights to guide future research in AVR.

Automated radiology report generation from 3D computed tomography (CT) volumes is challenging due to extreme sequence lengths, severe class imbalance, and the tendency of large language models (LLMs) to ignore visual tokens in favor of linguistic priors. We present Ker-VLJEPA-3B, a four-phase curriculum learning framework for free-text report generation from thoracic CT volumes. A phased training curriculum progressively adapts a Llama 3.2 3B decoder to ground its output in visual features from a frozen, self-supervised encoder. Our visual backbone (LeJEPA ViT-Large) is trained via self-supervised joint-embedding prediction on unlabeled CTs, without text supervision. Unlike contrastive models (CLIP, BiomedCLIP), this language-free backbone yields modality-pure representations. Vision-language alignment is deferred to the curriculum's bridge and generation phases. This modality-agnostic design can integrate any self-supervised encoder into an LLM without paired text during foundation training. Methodological innovations include: (1) zone-constrained cross-attention compressing slice embeddings into 32 spatially-grounded visual tokens; (2) PCA whitening of anisotropic LLM embeddings; (3) a positive-findings-only strategy eliminating posterior collapse; (4) warm bridge initialization transferring projection weights; and (5) selective cross-attention freezing with elastic weight consolidation to prevent catastrophic forgetting. Evaluated on the CT-RATE benchmark (2,984 validation volumes, 18 classes), Ker-VLJEPA-3B achieves a macro F1 of 0.429, surpassing the state-of-the-art (U-VLM, macro F1 = 0.414) by 3.6%, and reaching 0.448 (+8.2%) with threshold optimization. Ablation studies confirm 56.6% of generation quality derives from patient-specific visual content. Code and weights are available.

Speculative decoding mitigates the latency of sequential generation in autoregressive Large Language Models (LLMs) by interleaving draft generation with target verification. However, existing parallel drafting backends often suffer from rapid accuracy degradation over long horizons, leading to high rejection rates during verification and suboptimal wall-clock speedups. We observe that drafting errors are not uniformly distributed but typically stem from localized high-uncertainty tokens that destabilize downstream generation trajectories. Motivated by this token error pattern, we propose CURE, a budget-aware dynamic repair tree designed to repair errors at uncertainty focal points without incurring prohibitive tree-verification overheads. Specifically, our method uses predictive confidence margins to dynamically locate candidate error tokens within a block-parallel draft, expands bounded repair paths only at these fragile nodes, and employs a novel repair resynchronization mechanism to realign draft states post-verification. Evaluations on code-generation benchmarks (HumanEval, MBPP, and LiveCodeBench-lite) and mathematical reasoning benchmark (GSM8K) demonstrate that CURE increases the average accepted length by 4.2-7.5% over parallel baselines without repair, translating to an end-to-end speedup of 2.66-3.49times over target-only decoding. Furthermore, we provide a plug-and-play repair module compatible with standard parallel drafting frameworks. We also characterize the trade-off between draft compute and verification efficiency.

Convolutional neural networks typically encode an input image into a series of intermediate features with decreasing resolutions. While this structure is suited to classification tasks, it does not perform well for tasks requiring simultaneous recognition and localization (e.g., object detection). The encoder-decoder architectures are proposed to resolve this by applying a decoder network onto a backbone model designed for classification tasks. In this paper, we argue encoder-decoder architecture is ineffective in generating strong multi-scale features because of the scale-decreased backbone. We propose SpineNet, a backbone with scale-permuted intermediate features and cross-scale connections that is learned on an object detection task by Neural Architecture Search. Using similar building blocks, SpineNet models outperform ResNet-FPN models by ~3% AP at various scales while using 10-20% fewer FLOPs. In particular, SpineNet-190 achieves 52.5% AP with a MaskR-CNN detector and achieves 52.1% AP with a RetinaNet detector on COCO for a single model without test-time augmentation, significantly outperforms prior art of detectors. SpineNet can transfer to classification tasks, achieving 5% top-1 accuracy improvement on a challenging iNaturalist fine-grained dataset. Code is at: https://github.com/tensorflow/tpu/tree/master/models/official/detection.

The rapid advancement of bug-finding techniques has led to the discovery of more vulnerabilities than developers can reasonably fix, creating an urgent need for effective Automated Program Repair (APR) methods. However, the complexity of modern bugs often makes precise root cause analysis difficult and unreliable. To address this challenge, we propose crash-site repair to simplify the repair task while still mitigating the risk of exploitation. In addition, we introduce a template-guided patch generation approach that significantly reduces the token cost of Large Language Models (LLMs) while maintaining both efficiency and effectiveness. We implement our prototype system, WILLIAMT, and evaluate it against state-of-the-art APR tools. Our results show that, when combined with the top-performing agent CodeRover-S, WILLIAMT reduces token cost by 45.9% and increases the bug-fixing rate to 73.5% (+29.6%) on ARVO, a ground-truth open source software vulnerabilities benchmark. Furthermore, we demonstrate that WILLIAMT can function effectively even without access to frontier LLMs: even a local model running on a Mac M4 Mini achieves a reasonable repair rate. These findings highlight the broad applicability and scalability of WILLIAMT.

Contrastive Language-Image Pretraining (CLIP) stands out as a prominent method for image representation learning. Various neural architectures, spanning Transformer-based models like Vision Transformers (ViTs) to Convolutional Networks (ConvNets) like ResNets, are trained with CLIP and serve as universal backbones across diverse vision tasks. Despite utilizing the same data and training objectives, the effectiveness of representations learned by these architectures raises a critical question. Our investigation explores the differences in CLIP performance among these backbone architectures, revealing significant disparities in their classifications. Notably, normalizing these representations results in substantial performance variations. Our findings showcase a remarkable possible synergy between backbone predictions that could reach an improvement of over 20% through informed selection of the appropriate backbone. Moreover, we propose a simple, yet effective approach to combine predictions from multiple backbones, leading to a notable performance boost of up to 6.34\%. We will release the code for reproducing the results.

Video imaging is often affected by complex degradations such as blur, noise, and compression artifacts. Traditional restoration methods follow a "single-task single-model" paradigm, resulting in poor generalization and high computational cost, limiting their applicability in real-world scenarios with diverse degradation types. We propose UniFlowRestore, a general video restoration framework that models restoration as a time-continuous evolution under a prompt-guided and physics-informed vector field. A physics-aware backbone PhysicsUNet encodes degradation priors as potential energy, while PromptGenerator produces task-relevant prompts as momentum. These components define a Hamiltonian system whose vector field integrates inertial dynamics, decaying physical gradients, and prompt-based guidance. The system is optimized via a fixed-step ODE solver to achieve efficient and unified restoration across tasks. Experiments show that UniFlowRestore delivers stateof-the-art performance with strong generalization and efficiency. Quantitative results demonstrate that UniFlowRestore achieves state-of-the-art performance, attaining the highest PSNR (33.89 dB) and SSIM (0.97) on the video denoising task, while maintaining top or second-best scores across all evaluated tasks.

Automatic program repair (APR) is crucial to improve software reliability. Recently, neural machine translation (NMT) techniques have been used to fix software bugs automatically. While promising, these approaches have two major limitations. Their search space often does not contain the correct fix, and their search strategy ignores software knowledge such as strict code syntax. Due to these limitations, existing NMT-based techniques underperform the best template-based approaches. We propose CURE, a new NMT-based APR technique with three major novelties. First, CURE pre-trains a programming language (PL) model on a large software codebase to learn developer-like source code before the APR task. Second, CURE designs a new code-aware search strategy that finds more correct fixes by focusing on compilable patches and patches that are close in length to the buggy code. Finally, CURE uses a subword tokenization technique to generate a smaller search space that contains more correct fixes. Our evaluation on two widely-used benchmarks shows that CURE correctly fixes 57 Defects4J bugs and 26 QuixBugs bugs, outperforming all existing APR techniques on both benchmarks.

Large language models frequently fail to produce correct code on their first attempt, yet most benchmarks evaluate them in a single-shot setting. We investigate iterative self-repair (feeding execution errors back to the model for correction) across seven models spanning three families and both open-weight and proprietary providers: Llama 3.1 8B, Llama 3.3 70B, Llama 4 Scout (MoE, 16 experts), Llama 4 Maverick (MoE, 128 experts), Qwen3 32B, Gemini 2.5 Flash, and Gemini 2.5 Pro. On HumanEval (164 problems) and MBPP Sanitized (257 problems) with up to five attempts, self-repair universally improves pass rates: +4.9 to +17.1 pp on HumanEval and +16.0 to +30.0 pp on MBPP. Gemini 2.5 Flash achieves the highest final pass rates (96.3% HumanEval, 93.8% MBPP). Most gains concentrate in the first two rounds.Error-type analysis shows assertion errors (logical mistakes) are the hardest to repair at ~45%, while syntax and name errors are repaired at substantially higher rates, connecting to broader findings on the limits of LLM self-correction. Prior work found that weaker models fail at self-repair or require fine-tuning; we show that modern instruction-tuned models succeed with prompting alone, even at 8B scale. We also provide the first comparison of dense and MoE architectures for self-repair, and extend the repair-vs-resampling tradeoff analysis to modern models. A prompt ablation reveals chain-of-thought repair yields up to +5.5 pp additional self-repair gain (measured as improvement in repair delta) over minimal prompting for capable models.

Tool-augmented large language models have advanced from single-turn question answering to deep research workflows that iteratively plan queries, invoke external tools, and synthesize information to address complex information needs. Evaluating such workflows presents a fundamental challenge: reliance on live APIs introduces non-determinism, as tool invocations may yield different results across runs due to temporal drift, rate limiting, and evolving backend states. This variance undermines reproducibility and invalidates cross-system comparisons. We present ScholarGym, a simulation environment for reproducible evaluation of deep research workflows on academic literature. The environment decouples workflow components into query planning, tool invocation, and relevance assessment, enabling fine-grained analysis of each stage under controlled conditions. Built on a static corpus of 570K papers with deterministic retrieval, ScholarGym provides 2,536 queries with expert-annotated ground truth. Experiments across diverse backbone models reveal how reasoning capabilities, planning strategies, and selection mechanisms interact over iterative refinement.

Object detection is a critical component of various security-sensitive applications, such as autonomous driving and video surveillance. However, existing object detectors are vulnerable to adversarial attacks, which poses a significant challenge to their reliability and security. Through experiments, first, we found that existing works on improving the adversarial robustness of object detectors give a false sense of security. Second, we found that adversarially pre-trained backbone networks were essential for enhancing the adversarial robustness of object detectors. We then proposed a simple yet effective recipe for fast adversarial fine-tuning on object detectors with adversarially pre-trained backbones. Without any modifications to the structure of object detectors, our recipe achieved significantly better adversarial robustness than previous works. Finally, we explored the potential of different modern object detector designs for improving adversarial robustness with our recipe and demonstrated interesting findings, which inspired us to design state-of-the-art (SOTA) robust detectors. Our empirical results set a new milestone for adversarially robust object detection. Code and trained checkpoints are available at https://github.com/thu-ml/oddefense.

Neural Radiance Fields (NeRF) have shown impressive novel view synthesis results; nonetheless, even thorough recordings yield imperfections in reconstructions, for instance due to poorly observed areas or minor lighting changes. Our goal is to mitigate these imperfections from various sources with a joint solution: we take advantage of the ability of generative adversarial networks (GANs) to produce realistic images and use them to enhance realism in 3D scene reconstruction with NeRFs. To this end, we learn the patch distribution of a scene using an adversarial discriminator, which provides feedback to the radiance field reconstruction, thus improving realism in a 3D-consistent fashion. Thereby, rendering artifacts are repaired directly in the underlying 3D representation by imposing multi-view path rendering constraints. In addition, we condition a generator with multi-resolution NeRF renderings which is adversarially trained to further improve rendering quality. We demonstrate that our approach significantly improves rendering quality, e.g., nearly halving LPIPS scores compared to Nerfacto while at the same time improving PSNR by 1.4dB on the advanced indoor scenes of Tanks and Temples.

Prototype-based neural networks aim to provide intrinsic interpretability by grounding predictions in a small set of part prototypes. However, modern vision backbones typically operate in normalized, directional embedding spaces where each semantic part exhibits substantial intra-class variability. As a result, point prototypes often become redundant or unstable, hurting both explanation quality and robustness. We propose vMFProto, a distributional part-prototype framework that models each class as a mixture of von Mises-Fisher components on the hypersphere. Each prototype learns its own concentration, capturing part-specific variability, and we use entropic optimal transport (OT) to obtain structured patch-to-prototype assignments. A two-stage training schedule performs OT-driven prototype discovery followed by end-to-end refinement with patch-level distillation and distribution-aware diversity regularization. Experiments with frozen DINO backbones show that vMFProto achieves leading consistency and distinctiveness on CUB-200-2011 and competitive classification accuracy across CUB, Stanford Dogs, and Stanford Cars. Qualitative results confirm that vMFProto yields localized, non-redundant part evidence.