Daily Papers

Adding procedural skills to an LLM agent is typically evaluated by average improvement in task success. However, this metric hides an important cost: skills can also make agents worse. We measure both sides by comparing agents with and without skills across nearly 6,000 runs spanning two office automation benchmarks and three model harness stacks. This allows us to distinguish two outcomes. A regression is a task solved without skills but failed after skills are added. A residual failure is a task that fails both with and without skills. We find that regressions are substantial enough that the best performing skills outperform others primarily by regressing less, not by gaining more. We identify three causes of regression: (i) skill description osmosis, a skill changes an agent's behavior simply by being present in context, even when it is never invoked; (ii) grounding displacement, a skill's prescribed procedure overrides how the agent interprets its inputs; and (iii) verification displacement, where the procedure suppresses checks the agent would otherwise perform on its outputs. Analysing persistent failures reveals the same underlying pattern. Existing skills overemphasize procedural guidance the stage least often responsible for failure while under supporting grounding and verification, the dominant sources of remaining errors. After correcting evaluation artifacts and studying traces, we find many regressions and persistent failures recoverable through better grounding and verification. Procedural skills should be evaluated by decomposing their net effect into gains and regressions, not by aggregate improvement alone. We identify three regression modes skills should avoid, and find that reliability depends more on grounding and verification than on procedural skill choice.

Yes. Can it cure doom loops? Probably not. The Gemma 4 instruction-tuned models share a reproducible failure: on long factual enumeration prompts, such as listing every episode of a TV series, the 88 IAU constellations, or the 151 original Pokemon, they collapse into repetition, either a tight verbatim loop or a list whose entries decay onto a single answer. These loops occur at rates as high as 95% and survive prompt rewording, inference-engine changes, and most sampling adjustments. In this paper we explore whether this behavior is localized enough to remove by weight edits. To localize the cause, we use per-layer ablation and per-neuron attribution, then confirm the strongest candidates with full-generation sweeps. The loops trace to a small set of MLP neurons (or, in the 26B-A4B Mixture-of-Experts model, a few routed experts) which we suppress with static weight edits. These "surgeries" can be as small as a single sign-inverted neuron (in the E2B model). The size of the effective edits grows with model scale, but in all cases, the loop patterns can be addressed at normal generation budgets while preserving general-purpose benchmark scores. However, the edits do not solve everything: we also study longer thinking budgets, where the two larger models most visibly enter doom looping, i.e. a non-convergent regime in which the model self-corrects in circles over a fact it cannot recall, exhausting the budget without committing to a final answer. We show this residual failure is reduced but not eliminated by the same edits, and argue it is fundamentally a knowledge-precision problem rather than a removable circuit; weight surgery can delete a loop, but it cannot supply a missing fact. Our results are both a feasibility demonstration, that is, evidence that a concrete generation pathology can be localized to a few parameters and edited out, and a delineation of where that approach stops.

Real-world robotic manipulation in homes and factories demands reliability, efficiency, and robustness that approach or surpass skilled human operators. We present RL-100, a real-world reinforcement learning training framework built on diffusion visuomotor policies trained bu supervised learning. RL-100 introduces a three-stage pipeline. First, imitation learning leverages human priors. Second, iterative offline reinforcement learning uses an Offline Policy Evaluation procedure, abbreviated OPE, to gate PPO-style updates that are applied in the denoising process for conservative and reliable improvement. Third, online reinforcement learning eliminates residual failure modes. An additional lightweight consistency distillation head compresses the multi-step sampling process in diffusion into a single-step policy, enabling high-frequency control with an order-of-magnitude reduction in latency while preserving task performance. The framework is task-, embodiment-, and representation-agnostic and supports both 3D point clouds and 2D RGB inputs, a variety of robot platforms, and both single-step and action-chunk policies. We evaluate RL-100 on seven real-robot tasks spanning dynamic rigid-body control, such as Push-T and Agile Bowling, fluids and granular pouring, deformable cloth folding, precise dexterous unscrewing, and multi-stage orange juicing. RL-100 attains 100\% success across evaluated trials for a total of 900 out of 900 episodes, including up to 250 out of 250 consecutive trials on one task. The method achieves near-human teleoperation or better time efficiency and demonstrates multi-hour robustness with uninterrupted operation lasting up to two hours.

Premature closure, or committing to a conclusion before sufficient information is available, is a recognized contributor to diagnostic error but remains underexamined in large language models (LLMs). We define LLM premature closure as inappropriate commitment under uncertainty: providing an answer, recommendation, or clinical guidance when the safer response would be clarification, abstention, escalation, or refusal. We evaluated five frontier LLMs across structured and open-ended medical tasks. In MedQA (n = 500) and AfriMed-QA (n = 490) questions where the correct choice had been removed, models still selected an answer at high rates, with baseline false-action rates of 55-81% and 53-82%, respectively. In open-ended evaluation, models gave inappropriate answers on an average of 30% of 861 HealthBench questions and 78% of 191 physician-authored adversarial queries. Safety-oriented prompting reduced premature closure across models, but residual failure persisted, highlighting the need to evaluate whether medical LLMs know when not to answer.

Large Language Models used in ChatGPT have traditionally been trained to learn a refusal boundary: depending on the user's intent, the model is taught to either fully comply or outright refuse. While this is a strong mitigation for explicitly malicious prompts, focusing safety training on refusals can lead to brittleness for prompts with obscured user intent. Binary refusal boundaries are especially ill-suited for dual-use cases (such as biology or cybersecurity), where a user request can be answered safely at a high level, but in some cases can lead to malicious uplift if sufficiently detailed or actionable. As an alternative, we propose safe-completions: a safety-training approach that centers on the safety of the assistant's output, rather than a binary classification of the user's intent. Safe-completions seek to maximize helpfulness within the safety policy's constraints. We incorporated this approach into GPT-5 and find that across both production comparisons and internally controlled experiments, safe-completion training improves safety (especially on dual-use prompts), reduces the severity of residual safety failures, and substantially increases model helpfulness.

Efficient deployment of large language models (LLMs) requires extreme quantization, forcing a critical trade-off between low-bit efficiency and performance. Residual binarization enables hardware-friendly, matmul-free inference by stacking binary (pm1) layers, but is plagued by pathological feature co-adaptation. We identify a key failure mode, which we term inter-path adaptation: during quantization-aware training (QAT), parallel residual binary paths learn redundant features, degrading the error-compensation structure and limiting the expressive capacity of the model. While prior work relies on heuristic workarounds (e.g., path freezing) that constrain the solution space, we propose RaBiT, a novel quantization framework that resolves co-adaptation by algorithmically enforcing a residual hierarchy. Its core mechanism sequentially derives each binary path from a single shared full-precision weight, which ensures that every path corrects the error of the preceding one. This process is stabilized by a robust initialization that prioritizes functional preservation over mere weight approximation. RaBiT redefines the 2-bit accuracy-efficiency frontier: it achieves state-of-the-art performance, rivals even hardware-intensive Vector Quantization (VQ) methods, and delivers a 4.49times inference speed-up over full-precision models on an RTX 4090.

How do multi-turn reasoning systems fail? The expected answer is logical contradiction, in which the system's maintained state becomes unsatisfiable. We show that the dominant mode is instead satisfiable drift, where the internal state stays consistent while the returned answer silently violates prior commitments. We build DRIFT-Bench (Decomposing Reasoning Into Failure Types), a solver-instrumented benchmark of 816 test problems across three constraint domains, and evaluate four methods on it across four open-weight models (8B-120B parameters). MUS-Repair, which feeds minimal unsatisfiable subsets back to the generator, is strongest in every setting (+1.8 to +15.0 pp over the best non-MUS baseline). But the central finding is what repair leaves behind. After structured feedback, models rarely contradict themselves. They forget. Residual errors are 98-100% satisfiable drift across all settings, while contradiction drops to near zero. Reliable multi-turn systems must separately validate that the returned answer respects the maintained state. Code is available at https://github.com/kaons-research/drift-bench.

Test-Time Training (TTT) language models achieve theoretically infinite context windows with an O(1) memory footprint by replacing the standard exact-attention KV-cache with hidden state ``fast weights'' W_fast updated via self-supervised learning during inference. However, pure TTT architectures suffer catastrophic failures on exact-recall tasks (e.g., Needle-in-a-Haystack). Because the fast weights aggressively compress the context into an information bottleneck, highly surprising or unique tokens are rapidly overwritten and forgotten by subsequent token gradient updates. We introduce SR-TTT (Surprisal-Aware Residual Test-Time Training), which resolves this recall failure by augmenting the TTT backbone with a loss-gated sparse memory mechanism. By dynamically routing only incompressible, highly surprising tokens to a traditional exact-attention Residual Cache, SR-TTT preserves O(1) memory for low-entropy background context while utilizing exact attention exclusively for critical needles. Our complete implementation, training scripts, and pre-trained weights are open-source and available at: https://github.com/swamynathanvp/Surprisal-Aware-Residual-Test-Time-Training.

Modern Referring Image Segmentation (RIS) systems generate multiple candidate masks per expression but rely on a simple heuristic--typically the argmax detection score--to select the final output. We identify query selection as a failure-case bottleneck: although heuristic selection succeeds on 82-93% of samples, the residual 7-18% of failures dominate the error budget, leaving a best-query selection gap of 3-11% mIoU. We introduce Venice-H1, a lightweight, backbone-decoupled post-hoc re-ranking module that encodes each candidate through multi-scale grid signatures--compact spatial descriptors pooled onto 4x4, 8x8, and 16x16 grids--and feeds them to a Transformer-based re-ranker with a Failure Gate (ROCAUC 0.78-0.82) that intervenes only when the default choice is likely suboptimal. Instantiated on DeRIS-L and DeRIS-B, Venice-H1 achieves delta_fail of +1.40 and +0.89 mIoU with strictly positive 95% CIs on all 16/16 (split, backbone) pairs and harmful-switch rates below 0.53%. Zero-shot transfer to medical referring segmentation (MS-CXR, M3D-RefSeg-2D) yields +1.16 and +0.51 mIoU without RIS-backbone fine-tuning. The module adds approximately 11.3M parameters and under 1 ms latency.

Despite the success of physics-informed neural networks (PINNs) in approximating partial differential equations (PDEs), PINNs can sometimes fail to converge to the correct solution in problems involving complicated PDEs. This is reflected in several recent studies on characterizing the "failure modes" of PINNs, although a thorough understanding of the connection between PINN failure modes and sampling strategies is missing. In this paper, we provide a novel perspective of failure modes of PINNs by hypothesizing that training PINNs relies on successful "propagation" of solution from initial and/or boundary condition points to interior points. We show that PINNs with poor sampling strategies can get stuck at trivial solutions if there are propagation failures, characterized by highly imbalanced PDE residual fields. To mitigate propagation failures, we propose a novel Retain-Resample-Release sampling (R3) algorithm that can incrementally accumulate collocation points in regions of high PDE residuals with little to no computational overhead. We provide an extension of R3 sampling to respect the principle of causality while solving time-dependent PDEs. We theoretically analyze the behavior of R3 sampling and empirically demonstrate its efficacy and efficiency in comparison with baselines on a variety of PDE problems.

LLM agents fail mid-episode -- they loop, cascade tool errors, drift off goal, fabricate results, or silently absorb corrupted content -- and the standard remedy, judging every step with a second LLM, costs more than the agent itself. We ask how much detection is achievable from observable step telemetry alone, using monitors costing microseconds per step and trained only on healthy runs. On 2,823 committed agent episodes across three frameworks, three local models (qwen2.5 7b/3b, llama3.1 8b) and a commercial API (gemini-2.5-flash), a one-class echo-state-network ensemble with CUSUM alarms detects 0.71 of failures at a 5% false-alarm budget (AUROC 0.872). Its advantage over a memoryless baseline is a monotone function of post-onset horizon (+0.09 at <=3 steps, +0.40 at >=9), predicting its own failure region out of sample on AFTraj-2K. Ranking transfers with no retraining to two corpora from other groups (AFTraj-2K 0.745, ATBench 0.779). Monitors carry two burdens: a per-deployment healthy null (they do not transfer -- AUROC 0.527 cold against 0.885 recalibrated) and a residual false-alarm rate. We add a layer carrying neither: deterministic verification, which recomputes a run's stated total from the tool results it actually received and confirms every required call was made. Head-to-head it catches 60% of failures (96% with the coverage check) at 0 of 63 false positives against the monitor's 54% at 17%, transfers unchanged to llama3.1:8b (110 of 110 at 0 of 10), and trips on 0 of 1825 healthy episodes. Detection is then closed into repair: each flagged run is rolled back and re-run live, recovering 45% of failures against a 16% resampling control (p=0.0005) and lifting task success from 52% to 73% for about one extra model call per run. The system runs at ~200 microseconds per step, three orders of magnitude below a judge call. Code, traces and results are released.

We present ArtifactNet, a lightweight framework that detects AI-generated music by reframing the problem as forensic physics -- extracting and analyzing the physical artifacts that neural audio codecs inevitably imprint on generated audio. A bounded-mask UNet (ArtifactUNet, 3.6M parameters) extracts codec residuals from magnitude spectrograms, which are then decomposed via HPSS into 7-channel forensic features for classification by a compact CNN (0.4M parameters; 4.0M total). We introduce ArtifactBench, a multi-generator evaluation benchmark comprising 6,183 tracks (4,383 AI from 22 generators and 1,800 real from 6 diverse sources). Each track is tagged with bench_origin for fair zero-shot evaluation. On the unseen test partition (n=2,263), ArtifactNet achieves F1 = 0.9829 with FPR = 1.49%, compared to CLAM (F1 = 0.7576, FPR = 69.26%) and SpecTTTra (F1 = 0.7713, FPR = 19.43%) evaluated under identical conditions with published checkpoints. Codec-aware training (4-way WAV/MP3/AAC/Opus augmentation) further reduces cross-codec probability drift by 83% (Delta = 0.95 -> 0.16), resolving the primary codec-invariance failure mode. These results establish forensic physics -- direct extraction of codec-level artifacts -- as a more generalizable and parameter-efficient paradigm for AI music detection than representation learning, using 49x fewer parameters than CLAM and 4.8x fewer than SpecTTTra.

Large language model (LLM) scaling is hitting a wall. Widening models yields diminishing returns, and extending context length does not improve fundamental expressivity. In contrast, depth scaling offers theoretically superior expressivity, yet current Transformer architectures struggle to train reliably at extreme depths. We revisit the Post-LayerNorm (Post-LN) formulation, whose instability at scale caused its replacement by Pre-LN in modern LLMs. We show that the central failure mode of Post-LN arises from the ResNet-style residual pathway, which introduces gradient vanishing in deep networks. We present Keel, a Post-LN Transformer that replaces this residual path with a Highway-style connection. This modification preserves the gradient flow through the residual branch, preventing signal vanishing from the top layers to the bottom. Unlike prior methods, Keel enables stable training at extreme depths without requiring specialized initialization or complex optimization tricks. Keel trains robustly at depths exceeding 1000 layers and consistently improves perplexity and depth-scaling characteristics over Pre-LN. These findings indicate that Post-LN, when paired with a Highway-style connection, provides a simple and effective foundation for building deeply scalable LLMs, opening the possibility for future infinite-depth architectures.

A persistent challenge in machine learning for scientific applications is jointly achieving prediction and understanding. Statistical models excel on structured data but operate as black boxes, while existing interpretability methods are largely inspective: they answer "which features matter?" but do not articulate how features interact or refine explanations iteratively alongside human understanding. Asking an LLM to predict the target directly forces it to search the entire output space; we instead anchor predictions with a base model and ask the LLM the narrower question of what that model is missing. We introduce Multi-Agent Residual In-Context Learning (MARICL), an agentic framework in which LLM agents analyze where a base-model fails, hypothesize missing structure from high-residual examples provided in context, and produce explicit correction terms refined through multi-turn textual gradient optimization. Across nine benchmarks spanning scientific, biomedical, socioeconomic, and synthetic settings, MARICL improves consistently over its base model on all datasets. To test whether these corrections reflect real structure or batch-specific noise, we freeze formulas learned on one experimental batch of the Cell-Free Protein dataset and apply them (with no retraining and no further LLM calls) to held-out batches. Within the same reagent protocol, the frozen formulas improve predictions in over 92% of cases; across a different protocol, they fail systematically. The success boundary aligns with the biochemistry, not the batch count; direct evidence of mechanistic generalization.

Current paradigms for code verification rely heavily on external mechanisms-such as execution-based unit tests or auxiliary LLM judges-which are often labor-intensive or limited by the judging model's own capabilities. This raises a fundamental, yet unexplored question: Can an LLM's functional correctness be assessed purely from its internal computational structure? Our primary objective is to investigate whether the model's neural dynamics encode internally decodable signals that are predictive of logical validity during code generation. Inspired by mechanistic interpretability, we propose to treat code verification as a mechanistic diagnostic task, mapping the model's explicit algorithmic trajectory into line-level attribution graphs. By decomposing complex residual flows, we aim to identify the structural signatures that distinguish sound reasoning from logical failure within the model's internal circuits. Analysis across Python, C++, and Java confirms that intrinsic correctness signals are robust across diverse syntaxes. Topological features from these internal graphs predict correctness more reliably than surface heuristics and enable targeted causal interventions to fix erroneous logic. These findings establish internal introspection as a decodable property for verifying generated code. Our code is at https:// github.com/bruno686/CodeCircuit.

Large Language Models exhibit paradoxical fragility in fundamental arithmetic, implying a disconnect between internal computation and discrete output. By analyzing the residual stream geometry during multi-operand addition, we identify the Iso-Raw-Sum Trajectory (IRST), a geometric structure where representations are anchored by semantic digits and modulated by continuous carry fibers. We propose the Noisy Quantization Model to explain this geometry, framing arithmetic errors as Geometric Slippages caused by internal neural noise pushing a continuous, latent Carry Potential across quantization thresholds. This geometric framework further elucidates Probe Versatility, explaining how lightweight probes can disentangle coexisting latent signals (such as ground truth versus hallucination) from a single activation vector. Finally, we validate these insights through a geometric consistency check method that effectively detects and corrects these quantization failures during inference. Our code is available at https://github.com/RL-MIND/Shape-of-Addition.

End-to-end autonomous driving has emerged as a promising paradigm for directly mapping sensor inputs to planning maneuvers using learning-based modular integrations. However, existing imitation learning (IL)-based models suffer from generalization to hard cases, and a lack of corrective feedback loop under post-deployment. While reinforcement learning (RL) offers a potential solution to tackle hard cases with optimality, it is often hindered by overfitting to specific driving cases, resulting in catastrophic forgetting of generalizable knowledge and sample inefficiency. To overcome these challenges, we propose Reinforced Refinement with Self-aware Expansion (R2SE), a novel learning pipeline that constantly refines hard domain while keeping generalizable driving policy for model-agnostic end-to-end driving systems. Through reinforcement fine-tuning and policy expansion that facilitates continuous improvement, R2SE features three key components: 1) Generalist Pretraining with hard-case allocation trains a generalist imitation learning (IL) driving system while dynamically identifying failure-prone cases for targeted refinement; 2) Residual Reinforced Specialist Fine-tuning optimizes residual corrections using reinforcement learning (RL) to improve performance in hard case domain while preserving global driving knowledge; 3) Self-aware Adapter Expansion dynamically integrates specialist policies back into the generalist model, enhancing continuous performance improvement. Experimental results in closed-loop simulation and real-world datasets demonstrate improvements in generalization, safety, and long-horizon policy robustness over state-of-the-art E2E systems, highlighting the effectiveness of reinforce refinement for scalable autonomous driving.

A causal-decoder block is hierarchical: lower layers build the residual basis that upper layers attend over. We identify a failure mode in GPT pretraining: upper layers commit to sharp attention patterns before lower-layer features stabilize. We call this premature upper-layer attention specialization. Temporarily slowing only upper-layer Q/K projections during early training improves final perplexity and downstream accuracy without altering other parameters; it prevents upper attention from collapsing onto an immature residual basis. In LLaMA-style blocks, the same intervention is nearly unnecessary. Through ablations, we isolate multiplicative gated FFNs (not RMSNorm or bias removal) as the component that suppresses the upstream residual writes driving the failure. A pathwise analysis unifies both findings: the learning-rate intervention reduces a step-size factor, while gated FFNs reduce a residual-energy factor on the same growth pathway. Our results identify upper-layer Q/K timing as a concrete interaction point between decoder architecture and optimization.

Autonomous research systems increasingly make the scientific workflow executable: agents can propose ideas, run code, inspect results, and draft papers. But executable workflows do not by themselves produce research judgment. We analyze where current systems lose trial experience: weak evidence becomes prose, pilot signals become broad claims, memory remains textual, and recurring process failures do not change later behavior. We introduce Sibyl-AutoResearch, a self-evolving AutoResearch framework built around Scientific Trial-and-Error Harnesses. A harness lets agents run bounded trials, preserve positive and negative outcomes, and route lessons into later planning, validation, claim scope, scheduling, critique, writing, and harness repair. We formalize this through two auditable conversion units: trial-to-behavior conversion, which links trial signals to later research actions, and trial-to-harness-behavior conversion, which links recurring process failures to system updates. We implement the framework in SIBYL, a file-backed autonomous research system that exposes the state, roles, memory, gates, and artifact traces needed to inspect these conversion paths. A retrospective audit identifies eight high-confidence conversion events, with a median latency of one iteration and a maximum latency of three iterations. A recovered-failure registry further shows how five naturally occurring failure classes, including duplicate results, stale numbers, and unsupported statistics, were blocked, downgraded, or routed into later repair. These traces do not establish a comparative performance claim; they show that the proposed conversion units are recoverable from realistic autonomous-research workspaces. The SIBYL framework and system are available at https://github.com/Sibyl-Research-Team/AutoResearch-SibylSystem.

Retrieval-Augmented Generation (RAG) improves Large Language Model (LLM) performance on knowledge-intensive tasks but depends heavily on initial search query quality. Current methods, often using Reinforcement Learning (RL), typically focus on query formulation or reasoning over results, without explicitly encouraging persistence after a failed search. We introduce ReZero (Retry-Zero), a novel RL framework that directly rewards the act of retrying a search query following an initial unsuccessful attempt. This incentivizes the LLM to explore alternative queries rather than prematurely halting. ReZero demonstrates significant improvement, achieving 46.88% accuracy compared to a 25% baseline. By rewarding persistence, ReZero enhances LLM robustness in complex information-seeking scenarios where initial queries may prove insufficient.

The deployment of embodied agents in self-driving laboratories could accelerate scientific discovery, yet their reliability is constrained by the irreversible and safety-critical nature of chemical experiments. Progress is further hindered by scarce failure data and the lack of fine-grained evaluation protocols. To address these challenges, we introduce LabRobFail, a failure-centric framework for learning and evaluating robotic failure analysis in chemical laboratories. LabRobFail-Sim injects controllable failures at the control, physics, and semantic levels, enabling the construction of LabRobFail-Data, which contains over 20,000 trajectories across 70+ task scenarios, five failure categories, and 11 fine-grained failure types. LabRobFail-Bench evaluates six capabilities spanning task understanding, failure detection, temporal localization, severity assessment, failure classification, and actionable correction. We further develop LabRobFail-VLM, a domain-specialized vision-language model that generates structured failure diagnoses and recovery instructions. On seen environments, it achieves 90.83% failure-detection accuracy and 77.21% temporal-localization accuracy, substantially outperforming general-purpose VLMs. When integrated as a real-time supervisor, it improves downstream task success rates by 4-16 percentage points, demonstrating the value of fine-grained failure understanding for closed-loop recovery and reliable laboratory autonomy. Our code and data are available at https://github.com/Su-ISE-2001/SciRobo

The continuous delivery of modern software requires the execution of many automated pipeline jobs. These jobs ensure the frequent release of new software versions while detecting code problems at an early stage. For TELUS, our industrial partner in the telecommunications field, reliable job execution is crucial to minimize wasted time and streamline Continuous Deployment (CD). In this context, flaky job failures are one of the main issues hindering CD. Prior studies proposed techniques based on machine learning to automate the detection of flaky jobs. While valuable, these solutions are insufficient to address the waste associated with the diagnosis of flaky failures, which remain largely unexplored due to the wide range of underlying causes. This study examines 4,511 flaky job failures at TELUS to identify the different categories of flaky failures that we prioritize based on Recency, Frequency, and Monetary (RFM) measures. We identified 46 flaky failure categories that we analyzed using clustering and RFM measures to determine 14 priority categories for future automated diagnosis and repair research. Our findings also provide valuable insights into the evolution and impact of these categories. The identification and prioritization of flaky failure categories using RFM analysis introduce a novel approach that can be used in other contexts.

Large language model (LLM) agents are increasingly used for multi-step, stateful tool-use tasks, yet production reliability remains limited. Unlike static software repair, agent repair must recover dynamic trajectories whose early decisions can propagate into later errors and external state changes. Existing automatic remedies address only part of this problem: blind retry adds no diagnosis, outcome feedback says whether a run failed but not where or why, and self-reflection often lacks grounded evidence to prevent the same failure from recurring. We present AgentTether, a run-time repair framework that automates post-run diagnosis and guided recovery without modifying the underlying agent or environment. AgentTether abstracts each run into Transition Units, links them through a dependency-aware Critical Transition Graph, and localizes failure-critical subtrajectories by combining an offline normal-behavior model with a run-local graph detector. It then converts the localized cause into behavior-scoped guidance backed by cross-iteration Repair Memory, and can optionally apply guarded run-time intervention to keep the correction active during re-execution. The same design can be deployed as an offline diagnostic-and-guidance tool or as an online repair layer. We evaluate AgentTether on 261 tau-bench tasks across three domains with Qwen3.7-max, and test cross-model transfer on Banking with GPT-5.4. On the hardest Banking domain, AgentTether repairs 59.04% (49/83) of initially failed Qwen3.7-max tasks and 65.12% (56/86) of initially failed GPT-5.4 tasks. Overall, AgentTether improves repair effectiveness while reducing agent turns and end-to-end approach tokens, suggesting a practical reliability layer that can wrap existing agent deployments, reduce wasted re-execution, and improve recovery without retraining the agent.

Recent advances in robotic manipulation have integrated low-level robotic control into Vision-Language Models (VLMs), extending them into Vision-Language-Action (VLA) models. Although state-of-the-art VLAs achieve strong performance in downstream robotic applications, supported by large-scale crowd-sourced robot training data, they still inevitably encounter failures during execution. Enabling robots to reason and recover from unpredictable and abrupt failures remains a critical challenge. Existing robotic manipulation datasets, collected in either simulation or the real world, primarily provide only ground-truth trajectories, leaving robots unable to recover once failures occur. Moreover, the few datasets that address failure detection typically offer only textual explanations, which are difficult to utilize directly in VLA models. To address this gap, we introduce FailSafe, a novel failure generation and recovery system that automatically produces diverse failure cases paired with executable recovery actions. FailSafe can be seamlessly applied to any manipulation task in any simulator, enabling scalable creation of failure action data. To demonstrate its effectiveness, we fine-tune LLaVa-OneVision-7B (LLaVa-OV-7B) to build FailSafe-VLM. Experimental results show that FailSafe-VLM successfully helps robotic arms detect and recover from potential failures, improving the performance of three state-of-the-art VLA models (pi0-FAST, OpenVLA, OpenVLA-OFT) by up to 22.6% on average across several tasks in Maniskill. Furthermore, FailSafe-VLM could generalize across different spatial configurations, camera viewpoints, object and robotic embodiments. We plan to release the FailSafe code to the community.

Ensuring the safety and reliability of large language models (LLMs) in clinical practice is critical to prevent patient harm and promote trustworthy healthcare applications of AI. However, LLMs are advancing so rapidly that static safety benchmarks often become obsolete upon publication, yielding only an incomplete and sometimes misleading picture of model trustworthiness. We demonstrate that a Dynamic, Automatic, and Systematic (DAS) red-teaming framework that continuously stress-tests LLMs can reveal significant weaknesses of current LLMs across four safety-critical domains: robustness, privacy, bias/fairness, and hallucination. A suite of adversarial agents is applied to autonomously mutate test cases, identify/evolve unsafe-triggering strategies, and evaluate responses, uncovering vulnerabilities in real time without human intervention. Applying DAS to 15 proprietary and open-source LLMs revealed a stark contrast between static benchmark performance and vulnerability under adversarial pressure. Despite a median MedQA accuracy exceeding 80\%, 94\% of previously correct answers failed our dynamic robustness tests. We observed similarly high failure rates across other domains: privacy leaks were elicited in 86\% of scenarios, cognitive-bias priming altered clinical recommendations in 81\% of fairness tests, and we identified hallucination rates exceeding 66\% in widely used models. Such profound residual risks are incompatible with routine clinical practice. By converting red-teaming from a static checklist into a dynamic stress-test audit, DAS red-teaming offers the surveillance that hospitals/regulators/technology vendors require as LLMs become embedded in patient chatbots, decision-support dashboards, and broader healthcare workflows. Our framework delivers an evolvable, scalable, and reliable safeguard for the next generation of medical AI.

Outcome-reward reinforcement learning (RL) has proven effective at improving the reasoning capabilities of large language models (LLMs). However, standard RL assigns credit only at the level of the final answer, penalizing entire reasoning traces when the outcome is incorrect and uniformly reinforcing all steps when it is correct. As a result, correct intermediate steps may be discouraged in failed traces, while spurious steps may be reinforced in successful ones. We refer to this failure mode as the problem of credit assignment. While a natural remedy is to train a process reward model, accurately optimizing such models to identify corrective reasoning steps remains challenging. We introduce Intervention Training (InT), a training paradigm in which the model performs fine-grained credit assignment on its own reasoning traces by proposing short, targeted corrections that steer trajectories toward higher reward. Using reference solutions commonly available in mathematical reasoning datasets and exploiting the fact that verifying a model-generated solution is easier than generating a correct one from scratch, the model identifies the first error in its reasoning and proposes a single-step intervention to redirect the trajectory toward the correct solution. We then apply supervised fine-tuning (SFT) to the on-policy rollout up to the point of error concatenated with the intervention, localizing error to the specific step that caused failure. We show that the resulting model serves as a far better initialization for RL training. After running InT and subsequent fine-tuning with RL, we improve accuracy by nearly 14% over a 4B-parameter base model on IMO-AnswerBench, outperforming larger open-source models such as gpt-oss-20b.

Reinforcement Learning with Verifiable Rewards (RLVR) has substantially improved the reasoning abilities of large language models (LLMs), yet training often stalls as problems become saturated. We identify the core challenge as the poor accessibility of informative failures: learning signals exist but are rarely encountered during standard rollouts. To address this, we propose failure-prefix conditioning, a simple and effective method for learning from saturated problems. Rather than starting from the original question, our approach reallocates exploration by conditioning training on prefixes derived from rare incorrect reasoning trajectories, thereby exposing the model to failure-prone states. We observe that failure-prefix conditioning yields performance gains matching those of training on medium-difficulty problems, while preserving token efficiency. Furthermore, we analyze the model's robustness, finding that our method reduces performance degradation under misleading failure prefixes, albeit with a mild trade-off in adherence to correct early reasoning. Finally, we demonstrate that an iterative approach, which refreshes failure prefixes during training, unlocks additional gains after performance plateaus. Overall, our results suggest that failure-prefix conditioning offers an effective pathway to extend RLVR training on saturated problems.

LLM agents often retry after external validation rejects a candidate, but the interface between validation and the next model call remains underspecified. We introduce VeriHarness, a code-controlled agent loop in which models generate candidates while external validators control acceptance, budgets, and traces. We use it to compare raw diagnostics with feedback that identifies the failure location, observed value, and admissible alternatives. Across 50 paired TextWorld games under a four-call cap, feedback containing all three fields raises terminal success from 14/50 to 36/50 for Qwen2.5-Coder-14B (+44 percentage points) and from 8/50 to 29/50 for Llama-3.1-8B (+42 points). Ablations locate most of the gain in the admissible alternatives: feedback containing only the location and observed value remains near the raw diagnostic baseline. Presenting the complete repair information in prose instead of a keyed JSON record yields nearly the same success, providing no evidence that JSON syntax itself improves repair. The ordering persists across the tested call budgets and one sampled-decoding setting.

Vision-language-action (VLA) models provide a promising paradigm for scalable robotic manipulation, yet their reliance on success-only behavioral cloning leaves them brittle; lacking corrective training signals, minor execution errors rapidly compound into unrecoverable, out-of-distribution failures. To address this limitation, we propose Adaptive Failure-Informed Learning (AFIL), an end-to-end framework that leverages failure trajectories as adaptive negative guidance for diffusion- and flow-based VLA policies. AFIL uses a pretrained VLA to generate failure rollouts online, avoiding the need for handcrafted failure-mode design or human-in-the-loop recovery. It then jointly trains Dual Action Generators (DAGs) for successful and failed behaviors while sharing a common vision-language backbone, enabling efficient failure-aware policy learning with limited parameter overhead. During sampling, the failure generator adaptively steers action generation away from failure-prone regions and toward more reliable success modes, with guidance strength determined by the per-diffusion-step distance between success and failure distributions. Experiments across in-domain and out-of-domain robotic manipulation tasks, covering both short- and long-horizon settings, show that AFIL consistently improves task success rates and robustness over existing VLA baselines, demonstrating its effectiveness, efficiency, and generality.

Deployed multimodal systems can fail in ways that evaluators did not anticipate. In order to find these failures before deployment, we introduce MultiMon, a system that automatically identifies systematic failures -- generalizable, natural-language descriptions of patterns of model failures. To uncover systematic failures, MultiMon scrapes a corpus for examples of erroneous agreement: inputs that produce the same output, but should not. It then prompts a language model (e.g., GPT-4) to find systematic patterns of failure and describe them in natural language. We use MultiMon to find 14 systematic failures (e.g., "ignores quantifiers") of the CLIP text-encoder, each comprising hundreds of distinct inputs (e.g., "a shelf with a few/many books"). Because CLIP is the backbone for most state-of-the-art multimodal systems, these inputs produce failures in Midjourney 5.1, DALL-E, VideoFusion, and others. MultiMon can also steer towards failures relevant to specific use cases, such as self-driving cars. We see MultiMon as a step towards evaluation that autonomously explores the long tail of potential system failures. Code for MULTIMON is available at https://github.com/tsb0601/MultiMon.

Computer-use agents (CUAs) operate real desktop and web interfaces through screenshots, mouse and keyboard actions, and stateful UI feedback, yet their failures remain difficult to diagnose and repair. Unlike text-only agents, CUA failures arise from coupled visual perception, spatial grounding, low-level interaction, task reasoning, and environment dynamics, making debugging a distinctive multimodal causal localization problem. We introduce CUADebug, a framework for diagnosing and repairing CUA failures. CUADebug includes a CUA-specific error taxonomy, CUAErrorBench, a human-annotated OSWorld failure benchmark, and CUADebugger, a tool-augmented debugger. Instead of prompting over the full trajectory once, CUADebugger actively inspects suspicious steps with paired before/after screenshots and action traces, then submits a structured diagnosis containing the root-cause step, error type, grounded evidence, and corrective strategy for re-execution. Human annotations over 204 failed trajectories show that task reasoning and control is the largest failure family (110/204), followed by perception (36), grounding/interaction (25), external/system (13), and an others category of 20 OSWorld infeasible-task cases. On the main Claude-agent split, CUADebugger improves joint subtype-and-step diagnosis from 11.2% to 19.6% with Gemini 2.5 Pro and improves consistently across debugger backbones. In single re-execution package evaluation, RCA-based conditions achieve higher task completion than history-only continuation (28.47% with machine RCA and 29.90% with our method, versus 13.89%); in continual re-execution, our method improves success from 12.2% to 25.86%, while human-oracle guidance reaches 29.21%. These results show that CUA root-cause diagnosis can provide actionable repair signals rather than merely post-hoc explanations.

Reinforcement learning holds great promise for improving robot policies beyond the limits of imitation learning. However, its practical adoption remains bottlenecked by the lack of reliable vision-language reward models that provide dense and informative feedback. Two key challenges remain: acquiring diverse failure data at scale and obtaining fine-grained reward signals beyond sparse trajectory-level success labels. Collecting failure trajectories typically requires laborious human effort, while pseudo-failures constructed by relabeling successful demonstrations fail to capture the diverse physical failure modes that arise during robot execution. Meanwhile, existing reward models often predict sparse binary or trajectory-level rewards, which provide limited guidance for efficient policy optimization. We introduce DenseReward, a dense robotic reward model that addresses both challenges. To train DenseReward, we develop an automated failure data generation pipeline that synthesizes physically realistic failure trajectories in simulation without human labeling, covering diverse failure modes such as collisions, missed grasps, object drops, and recovery behaviors. DenseReward predicts dense frame-level reward scores from visual observations and language instructions, enabling fine-grained estimation of task progress throughout an episode. Experiments show that DenseReward outperforms general-purpose VLMs and existing robotic reward models in dense reward prediction across both simulated and real-world manipulation. We further demonstrate that DenseReward provides effective reward guidance for downstream model predictive control and reinforcement learning. We release the dataset, trained reward models, and evaluation suite to support the development of failure-aware dense reward modeling for robot learning.

Robust robotic manipulation requires reliable failure detection and recovery. Although recent Vision-Language Models (VLMs) show promise in robot failure detection, their generalization is severely limited by the scarcity and narrow coverage of failure data. To address this bottleneck, we propose an automatic framework for generating diverse robotic planning and execution failures across both simulated and real-world environments. Our approach perturbs successful manipulation trajectories to synthesize failures that reflect realistic failure distributions, and leverages VLMs to produce structured step-by-step reasoning traces. This yields FailCoT, a large-scale failure reasoning dataset built upon the RLBench simulator and the BridgeDataV2 real-robot dataset. Using FailCoT, we train Guardian, a multi-view reasoning VLM for unified planning and execution verification. Guardian achieves state-of-the-art performance on three unseen real-world benchmarks: RoboFail, RoboVQA, and our newly introduced UR5-Fail. When integrated with a state-of-the-art LLM-based manipulation policy, it consistently boosts task success rates in both simulation and real-world deployment. These results demonstrate that scaling high-quality failure reasoning data is critical for improving generalization in robotic failure detection. Code, Data, and Models available at https://www.di.ens.fr/willow/research/guardian/.

Tool-using automation systems, from scripts and CI bots to agentic assistants, fail in recurring patterns. Common failures include unsafe side effects, invalid arguments, uncontrolled retries, and leakage of sensitive outputs. Many mitigations are model-centric and prompt-dependent, so they are brittle and do not generalize to non-LLM callers. We present Policy-First Tooling, a model-agnostic permission layer that mediates tool invocation through explicit constraints, risk-aware gating, recovery controls, and auditable explanations. The paper contributes a compact policy DSL, a runtime enforcement architecture with actionable rationale and fix hints, and a reproducible benchmark based on trace replay with controlled fault and misuse injection. In 225 controlled runs across five policy packs and three fault profiles, stricter packs improve violation prevention from 0.000 in P0 to 0.681 in P4, while task success drops from 0.356 to 0.067. Retry amplification decreases from 3.774 in P0 to 1.378 in P4, and leakage recall reaches 0.875 under injected secret outputs. These results make safety to utility trade-offs explicit and measurable.

Predicting the remaining useful life (RUL) of ball bearings is an active area of research, where novel machine learning techniques are continuously being applied to predict degradation trends and anticipate failures before they occur. However, few studies have explicitly addressed the challenge of handling censored data, where information about a specific event (\eg mechanical failure) is incomplete or only partially observed. To address this issue, we introduce a novel and flexible method for early fault detection using Kullback-Leibler (KL) divergence and RUL estimation using survival analysis that naturally supports censored data. We demonstrate our approach in the XJTU-SY dataset using a 5-fold cross-validation strategy across three different operating conditions. When predicting the time to failure for bearings under the highest load (C1, 12.0 kN and 2100 RPM) with 25% random censoring, our approach achieves a mean absolute error (MAE) of 14.7 minutes (95% CI = 13.6-15.8) using a linear CoxPH model, and an MAE of 12.6 minutes (95% CI = 11.8-13.4) using a nonlinear Random Survival Forests model, compared to an MAE of 18.5 minutes (95% CI = 17.4-19.6) using a linear LASSO model that does not support censoring. Moreover, our approach achieves a mean cumulative relative accuracy (CRA) of 0.7586 over 5 bearings under the highest load, which improves over several state-of-the-art baselines. Our work highlights the importance of considering censored data as part of the model design when building predictive models for early fault detection and RUL estimation.

Attention Residuals replace standard additive residual connections with learned softmax attention over previous layer outputs, enabling selective cross-layer routing. However, standard Attention Residuals still attend over cumulative hidden states in previous layers, which are highly redundant. We show that this redundancy leads to routing collapse in deeper layers: attention weights become low-contrast and closer to uniform (max weight {approx}0.2), limiting the model's ability to select informative states in previous layers. This raises a key but underexplored design question: what layer-wise representations should be routed in Attention Residuals? To answer this question, we propose Delta Attention Residuals, which attend over deltas -- the change introduced by each sublayer (v_i = h_{i+1} - h_i) -- instead of cumulative states. Delta representations are structurally diverse and yield higher-contrast attention distributions (max weight {approx}0.6), enabling more selective and effective routing across layers. This principle applies at both per-sublayer and block granularity. Across all tested scales (220M--7.6B), Delta Attention Residuals consistently outperform both standard residuals and Attention Residuals, with 1.7--8.2\% validation perplexity gains. Delta Attention Residuals also enables converting pretrained checkpoints into Delta Attention Residuals via standard fine-tuning. Code is available at https://github.com/wdlctc/delta-attention-residuals-code.

Large language models are increasingly deployed as agents that solve tasks by interacting with external tool environments. Although recent tool-use benchmarks increasingly cover complex task settings, they still largely assume clean, stable, and trustworthy tool environments, leaving tool-environment unreliability insufficiently examined. We introduce ToolBench-X, a benchmark for evaluating agents under recoverable reliability hazards. ToolBench-X contains executable multi-step tasks across diverse domains and sequential, parallel, and mixed workflows, each paired with deterministic tools and a canonical final answer for automatic evaluation. Starting from clean tool environments, ToolBench-X injects five structured hazard types: Specification Drift, Invocation Error, Execution Failure, Output Drift, and Cross-source Conflict. Crucially, each injected instance remains solvable through at least one valid recovery path, such as retrying, fallback, verification, or cross-checking. Experiments reveal a substantial reliability gap: agents that perform well with reliable tools often fail under recoverable hazards. Further analysis shows that failures are driven less by tool-use volume or inference budget than by limited hazard diagnosis and ineffective recovery. Targeted recovery hints recover many failed tasks, while test-time scaling yields more limited gains. These results suggest that tool-use evaluation should move beyond function-call accuracy toward task completion under unreliable tool environments. The code and data is available at https://github.com/Foreverskyou/ToolBench-X.

Autonomous improvement loops are hard to trust because the improvement process is usually external scaffolding bolted onto the agent: failures go unlogged, diagnoses cannot be replayed, and promote-or-discard decisions land in a side database rather than the agent's own history. We show that an event-sourced agent runtime removes that friction and turns controlled improvement into a first-class workflow. When the agent's state is a deterministic projection of an append-only event log, failures are recorded, a run replays exactly from its log, candidate patches scope to typed pipeline seams, gates are auditable, and every promotion or discard is itself an event. We demonstrate this with Regimes, a loop on the ActiveGraph runtime that diagnoses failed evaluations, proposes a repair at a pipeline point, and promotes it only after static checks, sandbox execution, in-sample evaluation, and held-out validation. The loop is target-agnostic: the same control flow runs against different tasks through a common interface. On LongMemEval-S the dominant failure is not retrieval but reconciliation: the evidence is already in the assembled context, yet the reader answers incorrectly. Across five seeded held-out splits, Regimes discovers reader-prompt repairs that improve final held-out accuracy by +0.05 to +0.10 in four splits and +0.01 in one over-promotion split; two splits are individually significant (seed 5 unadjusted for its sequential promotion structure), and the pooled count is descriptive only, since the splits share one 500-question pool. The durable contributions are ActiveGraph as an auditable substrate that makes controlled improvement loops tractable, the held-out-gated loop it supports, the failure-regime taxonomy routing each failure to a pipeline location (whose marginal value over an unrouted baseline is the primary open question), and the prompt-as-discovery-probe hypothesis.

Prognostic Health Management (PHM) systems monitor and predict equipment health. A key task is Remaining Useful Life (RUL) estimation, which predicts how long a component, such as a rolling element bearing, will operate before failure. Many RUL methods exist but often lack generalizability and robustness under changing operating conditions. This paper introduces CARLE, a hybrid AI framework that combines deep and shallow learning to address these challenges. CARLE uses Res-CNN and Res-LSTM blocks with multi-head attention and residual connections to capture spatial and temporal degradation patterns, and a Random Forest Regressor (RFR) for stable, accurate RUL prediction. A compact preprocessing pipeline applies Gaussian filtering for noise reduction and Continuous Wavelet Transform (CWT) for time-frequency feature extraction. We evaluate CARLE on the XJTU-SY and PRONOSTIA bearing datasets. Ablation studies measure each component's contribution, while noise and cross-domain experiments test robustness and generalization. Comparative results show CARLE outperforms several state-of-the-art methods, especially under dynamic conditions. Finally, we analyze model interpretability with LIME and SHAP to assess transparency and trustworthiness.

Tool-using LLM agents are mostly evaluated assuming all tools work. When a tool times out, returns a week-stale value, or has its description poisoned in deployment, the developer needs a controlled way to reproduce the failure, test a fix, and confirm the fix worked before deployment. We present AgentCheck, an open-source web workbench that turns an MCP server into an intervention surface. AgentCheck runs an agent against its real tools and records every tool response, then re-runs the agent with the response perturbed by a fault (12 types) injector. Matching tool calls are replayed from cache, and later tool calls go live after the agent diverges. This yields a reproduce-intervene-confirm loop: the developer toggles a mitigation, re-runs against the identical fault, and sees if the failure goes away. Scoring has two parts: deterministic pass/fail rules, plus an LLM judge for interpretive labels, validated against human annotations. Across five agents, the best passes 105/120 scenarios and the weakest only 77. The failures are usually silent, confident use of incorrect tool outputs rather than crashes. On the weakest agent, a retry mitigation raises success on timeout error faults from as few as 30% of cases to 100%, whereas stale-data faults remain near 3-4 of 10 regardless of the mitigation. AgentCheck makes these failure modes reproducible, comparable, and verifiable before deployment.

Serving large language models (LLMs) under diverse deployment constraints requires flexible trade-offs between accuracy, memory footprint, and throughput. However, conventional quantization methods typically require a separate checkpoint for each target bit-width. We introduce Recurrent Residual Quantization (RRQ), a post-training quantization (PTQ) framework that represents weights as a low-bit quantized base together with a sequence of quantized residual corrections, enabling multiple effective precisions from a single checkpoint. Starting from a 2-bit model obtained via post-training quantization (PTQ) or round-to-nearest (RTN), RRQ progressively adds lightweight 2-bit residuals generated via RTN to construct 4-, 6-, and 8-bit representations. The method is calibration-free and avoids joint multi-bit optimization. In our Qwen3-8B setup, the full all-RTN 2-/4-/6-/8-bit package is constructed in 1,293 seconds, 3.3 times faster than the measured MatGPTQ construction. Experiments on six recent LLMs show competitive accuracy at 6 and 8 bits, with model-dependent behavior at 4 bits. The code will be made publicly available upon publication.

Self-improving AI agents are designed to learn from their mistakes. We show they can also hallucinate mistakes that never happened. We study this failure mode in automated harness optimization, where an LLM-based proposer edits an agent's scaffold, including prompts, parsers, filters, validators and guardrails, to eliminate observed failures. But this process rarely asks first: was there a real failure to fix? We introduce the Counterfactual Fabrication Lab, a deterministic micro-lab where the correct action is known: do nothing. The lab plants a candidate guardrail for a failure class that provably never occurs, presents only legal episodes, and uses a byte-exact oracle to check every cited violation. The proposer behaves as expected on real violations and abstains on featureless legal input. Yet when the legal input contains a harmless pattern resembling a familiar game rule, it invents a failure: in 15/60 runs, versus 0/60 on featureless input, it enables the nonexistent-rule guardrail and cites a violation the oracle refutes. The effect is structured, not indiscriminate. In single-shot proposals it appears only when three conditions coincide: a rule-shaped pattern, an open-ended rule set and an instruction that presupposes failures. Removing any of these conditions eliminates the fabrication. Because the invented guardrail changes no true outcome and cannot improve an already-perfect suppression score, the phenomenon is neither reward hacking nor over-refusal. It is a phantom guardrail: a fix for a failure that never happened, invisible to suppression-only acceptance. Inside an add-only accept loop it re-enters even without the failure-presupposing instruction, the loop's keep-adding role supplying the demand the instruction supplied in single shot, and once in it stays. We present the Counterfactual Fabrication Lab for measuring fabricated failures in self-improving agent harnesses.

AI systems increasingly retrieve from records that revise themselves: issue threads, encyclopedic histories, policy logs, and long conversations. The challenge is not only finding relevant evidence, but deciding which claims remain in force, which were superseded, and when to abstain. Structured memories promise to solve this with typed edges, temporal updates, and conflict status, yet evaluations often change mechanism and prompt presentation together. We study this as Evidence-State Revision, comparing flat retrieval, coarse edge invalidation, and fine-grained RevisionLedger on 2,907 high-agreement questions from GitHub, multi-repo issue histories, Wikipedia, and DyKnow-style temporal streams. A render-matched control (same layout, deprecation disabled) reveals the central confound: when a value is changed and later restored, RevisionLedger appears to beat a flat baseline by +0.182, but almost all the gain comes from easier presentation; the fine-grained mechanism residual is indistinguishable from zero (+0.021 to +0.025 across two judge families). After presentation is controlled, coarse invalidation is the only mechanism that pays for current-state queries, beating the fine ledger by 0.084; the same query-sufficiency principle says provenance mainly needs retained invalidated evidence, not richer typing. Memory evaluations should hold render fixed, and deprecation-aware systems should deploy the coarsest retained state that covers their queries.

In Agentic AI, Large Language Models (LLMs) are increasingly used in the orchestration layer to coordinate multiple agents and to interact with external services, retrieval components, and shared memory. In this setting, failures are not limited to incorrect final outputs. They also arise from long-horizon interaction, stochastic decisions, and external side effects (such as API calls, database writes, and message sends). Common failures include non-termination, role drift, propagation of unsupported claims, and attacks via untrusted context or external channels. This paper presents an assurance framework for such Agentic AI systems. Executions are instrumented as Message-Action Traces (MAT) with explicit step and trace contracts. Contracts provide machine-checkable verdicts, localize the first violating step, and support deterministic replay. The framework includes stress testing, formulated as a budgeted counterexample search over bounded perturbations. It also supports structured fault injection at service, retrieval, and memory boundaries to assess containment under realistic operational faults and degraded conditions. Finally, governance is treated as a runtime component, enforcing per-agent capability limits and action mediation (allow, rewrite, block) at the language-to-action boundary. To support comparative evaluations across stochastic seeds, models, and orchestration configurations, the paper defines trace-based metrics for task success, termination reliability, contract compliance, factuality indicators, containment rate, and governance outcome distributions. More broadly, the framework is intended as a common abstraction to support testing and evaluation of multi-agent LLM systems, and to facilitate reproducible comparison across orchestration designs and configurations.

Advancements in large language models (LLMs) have demonstrated their potential in facilitating high-level reasoning, logical reasoning and robotics planning. Recently, LLMs have also been able to generate reward functions for low-level robot actions, effectively bridging the interface between high-level planning and low-level robot control. However, the challenge remains that even with syntactically correct plans, robots can still fail to achieve their intended goals. This failure can be attributed to imperfect plans proposed by LLMs or to unforeseeable environmental circumstances that hinder the execution of planned subtasks due to erroneous assumptions about the state of objects. One way to prevent these challenges is to rely on human-provided step-by-step instructions, limiting the autonomy of robotic systems. Vision Language Models (VLMs) have shown remarkable success in tasks such as visual question answering and image captioning. Leveraging the capabilities of VLMs, we present a novel framework called Robotic Replanning with Perception and Language Models (RePLan) that enables real-time replanning capabilities for long-horizon tasks. This framework utilizes the physical grounding provided by a VLM's understanding of the world's state to adapt robot actions when the initial plan fails to achieve the desired goal. We test our approach within four environments containing seven long-horizion tasks. We find that RePLan enables a robot to successfully adapt to unforeseen obstacles while accomplishing open-ended, long-horizon goals, where baseline models cannot. Find more information at https://replan-lm.github.io/replan.github.io/

This work identifies a critical failure mode in frontier large language models (LLMs), which we term Internal Safety Collapse (ISC): under certain task conditions, models enter a state in which they continuously generate harmful content while executing otherwise benign tasks. We introduce TVD (Task, Validator, Data), a framework that triggers ISC through domain tasks where generating harmful content is the only valid completion, and construct ISC-Bench containing 53 scenarios across 8 professional disciplines. Evaluated on JailbreakBench, three representative scenarios yield worst-case safety failure rates averaging 95.3% across four frontier LLMs (including GPT-5.2 and Claude Sonnet 4.5), substantially exceeding standard jailbreak attacks. Frontier models are more vulnerable than earlier LLMs: the very capabilities that enable complex task execution become liabilities when tasks intrinsically involve harmful content. This reveals a growing attack surface: almost every professional domain uses tools that process sensitive data, and each new dual-use tool automatically expands this vulnerability--even without any deliberate attack. Despite substantial alignment efforts, frontier LLMs retain inherently unsafe internal capabilities: alignment reshapes observable outputs but does not eliminate the underlying risk profile. These findings underscore the need for caution when deploying LLMs in high-stakes settings. Source code: https://github.com/wuyoscar/ISC-Bench

Reward modeling (RM), which captures human preferences to align large language models (LLMs), is increasingly employed in tasks such as model finetuning, response filtering, and ranking. However, due to the inherent complexity of human preferences and the limited coverage of available datasets, reward models often fail under distributional shifts or adversarial perturbations. Existing approaches for identifying such failure modes typically rely on prior knowledge about preference distributions or failure attributes, limiting their practicality in real-world settings where such information is unavailable. In this work, we propose a tractable, preference-distribution agnostic method for discovering reward model failure modes via reward guided controlled decoding. Building on this, we introduce REFORM, a self-improving reward modeling framework that enhances robustness by using the reward model itself to guide the generation of falsely scored responses. These adversarial examples are then used to augment the training data and patch the reward model's misaligned behavior. We evaluate REFORM on two widely used preference datasets Anthropic Helpful Harmless (HH) and PKU Beavertails and demonstrate that it significantly improves robustness without sacrificing reward quality. Notably, REFORM preserves performance both in direct evaluation and in downstream policy training, and further improves alignment quality by removing spurious correlations.

Vision-Language-Action (VLA) models enable robots to follow natural language instructions and generalize across diverse tasks, but they remain vulnerable to execution failures that compromise reliability in real-world deployment. Detecting such failures during execution is therefore critical for the robust deployment of embodied systems. Existing failure detection methods either rely on expensive action resampling or external models, while alternatives propagate trajectory-level labels uniformly across every timestep, obscuring localized failure signals. In this paper, we propose Hide-and-Seek, a framework that formulates VLA failure detection as a coarsely supervised learning problem. By combining inter-trajectory and intra-trajectory contrastive objectives, Hide-and-Seek localizes failure-indicative actions and induces temporally structured failure signals from trajectory-level supervision alone, without any step-level annotation. We evaluate Hide-and-Seek on LIBERO, VLABench, and a real-world robotic platform across three representative VLA policies: OpenVLA, π_0, and π_{0.5}.Our method achieves state-of-the-art multi-task failure detection performance with a practical accuracy--timeliness trade-off under conformal prediction, and generalizes well to both seen and unseen tasks.

Looped Transformers scale sequential computation by applying a compact stack of physical blocks for multiple rounds, increasing unrolled depth without increasing stored parameters. This reuse changes the residual-scaling problem: in an untied Transformer, each residual branch receives and applies its own parameter update, whereas in a looped Transformer one shared update aggregates gradients from repeated visits and is read back by those same visits in the next linearized forward pass. We formalize this tied-depth effect through a first-order perturbation bound controlled by a visit-alignment coefficient κ_R. The bound recovers the DeepNorm exponent when visits decorrelate, but in the conservative aligned regime it requires the exponent to increase from 1/4 to 1/2 as loop count grows at fixed physical depth. The resulting method, DeepLoop, keeps the Post-LN DeepNorm architecture and sets α=(2N)^{1/2} and β=(8N)^{-1/2} for unrolled depth N. On GPT-style looped language models at GPT-2 small and GPT-2 medium scale, DeepLoop is neutral when no physical block is revisited and improves validation loss and downstream accuracy once recurrent depth is activated. These results show that stable recurrent depth requires residual scaling rules that account for parameter visits, not only nominal layer count.

Engineered timber is pivotal to low-carbon construction, but moisture uptake during its service life can compromise structural reliability and impede reuse within a circular economy model. Despite growing interest, quantitative standards for classifying the reusability of moisture-exposed timber are still lacking. This study develops a probabilistic framework to determine the post-exposure reusability of engineered timber. Laminated specimens were soaked to full saturation, dried to 25% moisture content, and subjected to destructive three-point flexural testing. Structural integrity was quantified by a residual-performance metric that assigns 80% weight to the retained flexural modulus and 20% to the retained maximum load, benchmarked against unexposed controls. A hierarchical Bayesian multinomial logistic model with horseshoe priors, calibrated through Markov-Chain Monte-Carlo sampling, jointly infers the decision threshold separating three Modern Methods of Construction (MMC) reuse levels and predicts those levels from five field-measurable features: density, moisture content, specimen size, grain orientation, and surface hardness. Results indicate that a single wet-dry cycle preserves 70% of specimens above the 0.90 residual-performance threshold (Level 1), whereas repeated cycling lowers the mean residual to 0.78 and reallocates many specimens to Levels 2-3. The proposed framework yields quantified decision boundaries and a streamlined on-site testing protocol, providing a foundation for robust quality assurance standards.

Agentic LLM coding tools compress long session histories into compaction summaries that subsequent sessions inherit as ground truth. This paper documents a failure mode in Claude Code where partial standard output from timed-out commands (exit code 143) is recorded in compaction summaries as confirmed results, propagating false positives across sessions and model versions without re-verification. The underlying mechanism is a conflation of observation and persistence, where information that appeared in the terminal is treated as equivalent to information written to durable storage. This finding extends the analysis of LLM self-evaluation failures reported in prior work on non-determinism in LLM-as-judge grading by showing that agentic tools exhibit analogous reliability deficits when reporting on their own operational outcomes. The failure has direct implications for any workflow that relies on agentic session continuity for data processing, scientific computation, or multi-step automation.

When considering the accuracy of sensors in an automated vehicle (AV), it is not sufficient to evaluate the performance of any given sensor in isolation. Rather, the performance of any individual sensor must be considered in the context of the overall system design. Techniques like redundancy and different sensing modalities can reduce the chances of a sensing failure. Additionally, the use of safety models is essential to understanding whether any particular sensing failure is relevant. Only when the entire system design is taken into account can one properly understand the meaning of safety-relevant sensing failures in an AV. In this paper, we will consider what should actually constitute a sensing failure, how safety models play an important role in mitigating potential failures, how a system-level approach to safety will deliver a safe and scalable AV, and what an acceptable sensing failure rate should be considering the full picture of an AV's architecture.

While vision-language-action models (VLAs) have shown promising robotic behaviors across a diverse set of manipulation tasks, they achieve limited success rates when deployed on novel tasks out-of-the-box. To allow these policies to safely interact with their environments, we need a failure detector that gives a timely alert such that the robot can stop, backtrack, or ask for help. However, existing failure detectors are trained and tested only on one or a few specific tasks, while VLAs require the detector to generalize and detect failures also in unseen tasks and novel environments. In this paper, we introduce the multitask failure detection problem and propose SAFE, a failure detector for generalist robot policies such as VLAs. We analyze the VLA feature space and find that VLAs have sufficient high-level knowledge about task success and failure, which is generic across different tasks. Based on this insight, we design SAFE to learn from VLA internal features and predict a single scalar indicating the likelihood of task failure. SAFE is trained on both successful and failed rollouts, and is evaluated on unseen tasks. SAFE is compatible with different policy architectures. We test it on OpenVLA, pi_0, and pi_0-FAST in both simulated and real-world environments extensively. We compare SAFE with diverse baselines and show that SAFE achieves state-of-the-art failure detection performance and the best trade-off between accuracy and detection time using conformal prediction. More qualitative results can be found at https://vla-safe.github.io/.

Safety benchmark scores provide incomplete evidence of deployment readiness: aligned language models often adhere to rigid rules even when a situational update flips which action is safe. We term this failure brittle safety. To diagnose it, we introduce context-flip evaluation, testing 12 models across a safety benchmark (PacifAIst) and two commonsense controls using paired variants where the nominally safe action produces harm. Three findings emerge. First, brittle safety is safety-specific: all 12 models exhibit a safety-commonsense gap (mean +17.4 pp). Baseline accuracy fails to predict brittleness: among models above 90% baseline accuracy, brittleness rates range from 13.7% to 90.0%. Second, failures stem from policy override rather than miscomprehension: despite acknowledging the context change in every case, models persist via three distinct mechanisms that vary by update type and model family. Third, on a hand-audited probe of catastrophic consequence-flip scenarios, standard action-level guardrails catch none, while a state-aware validator catches all without false alarms on correct interventions. This indicates that action-level content moderation is systematically blind to consequence-flips, motivating state-aware architectural alternatives. We release our protocol, perturbed benchmarks, and deployment probe.

As AI becomes more capable, we entrust it with more general and consequential tasks. The risks from failure grow more severe with increasing task scope. It is therefore important to understand how extremely capable AI models will fail: Will they fail by systematically pursuing goals we do not intend? Or will they fail by being a hot mess, and taking nonsensical actions that do not further any goal? We operationalize this question using a bias-variance decomposition of the errors made by AI models: An AI's incoherence on a task is measured over test-time randomness as the fraction of its error that stems from variance rather than bias in task outcome. Across all tasks and frontier models we measure, the longer models spend reasoning and taking actions, the more incoherent their failures become. Incoherence changes with model scale in a way that is experiment dependent. However, in several settings, larger, more capable models are more incoherent than smaller models. Consequently, scale alone seems unlikely to eliminate incoherence. Instead, as more capable AIs pursue harder tasks, requiring more sequential action and thought, our results predict failures to be accompanied by more incoherent behavior. This suggests a future where AIs sometimes cause industrial accidents (due to unpredictable misbehavior), but are less likely to exhibit consistent pursuit of a misaligned goal. This increases the relative importance of alignment research targeting reward hacking or goal misspecification.

Reinforcement learning drives recent advances in LLM reasoning and agentic capabilities, yet current approaches struggle with both exploration and exploitation. Exploration suffers from low success rates on difficult tasks and high costs of repeated rollouts from scratch. Exploitation suffers from coarse credit assignment and training instability: Trajectory-level rewards penalize valid prefixes for later errors, and failure-dominated groups overwhelm the few positive signals, leaving optimization without constructive direction. To this end, we propose R^3L, Reflect-then-Retry Reinforcement Learning with Language-Guided Exploration, Pivotal Credit, and Positive Amplification. To synthesize high-quality trajectories, R^3L shifts from stochastic sampling to active synthesis via reflect-then-retry, leveraging language feedback to diagnose errors, transform failed attempts into successful ones, and reduce rollout costs by restarting from identified failure points. With errors diagnosed and localized, Pivotal Credit Assignment updates only the diverging suffix where contrastive signals exist, excluding the shared prefix from gradient update. Since failures dominate on difficult tasks and reflect-then-retry produces off-policy data, risking training instability, Positive Amplification upweights successful trajectories to ensure positive signals guide the optimization process. Experiments on agentic and reasoning tasks demonstrate 5\% to 52\% relative improvements over baselines while maintaining training stability. Our code is released at https://github.com/shiweijiezero/R3L.

Reasoning failures in large language models (LLMs) are typically measured only at the end of a generation, yet many failures manifest as a process-level breakdown: the model "loses the thread" mid-reasoning. We study whether such breakdowns are detectable from inference-time observables available in standard APIs (token log probabilities), without any training or fine-tuning. We define a simple instability signal that combines consecutive-step distributional shift (JSD) and uncertainty (entropy), summarize each trace by its peak instability strength, and show that this signal reliably predicts failure. Across GSM8K and HotpotQA, instability strength predicts wrong answers with above-chance AUC and yields monotonic bucket-level accuracy decline at scale across model sizes. Crucially, we show that instability is not uniformly harmful: early instability can reflect subsequent stabilization and a correct final answer (corrective instability), whereas late instability is more often followed by failure (destructive instability), even at comparable peak magnitudes, indicating that recoverability depends not only on how strongly the distribution changes but also on when such changes occur relative to the remaining decoding horizon. The method is model-agnostic, training-free, and reproducible, and is presented as a diagnostic lens rather than a corrective or control mechanism.

Redundant code is a persistent challenge in software development that makes systems harder to maintain, scale, and update. It adds unnecessary complexity, hinders bug fixes, and increases technical debt. Despite their impact, removing redundant code manually is risky and error-prone, often introducing new bugs or missing dependencies. While studies highlight the prevalence and negative impact of redundant code, little focus has been given to Artificial Intelligence (AI) system codebases and the common patterns that cause redundancy. Additionally, the reasons behind developers unintentionally introducing redundant code remain largely unexplored. This research addresses these gaps by leveraging large language models (LLMs) to automatically detect and optimize redundant code in AI projects. Our research aims to identify recurring patterns of redundancy and analyze their underlying causes, such as outdated practices or insufficient awareness of best coding principles. Additionally, we plan to propose an LLM agent that will facilitate the detection and refactoring of redundancies on a large scale while preserving original functionality. This work advances the application of AI in identifying and optimizing redundant code, ultimately helping developers maintain cleaner, more readable, and scalable codebases.

Existing evaluations often reduce agent failures to system-level outcomes, obscuring where the fault originated and which intervention would improve the agent system. This creates a repair-assignment problem: the same visible failure may call for model post-training, harness engineering, environment redesign, or benchmark repair depending on its source. Because agent behavior emerges from interactions among models, harnesses, users, tools, memory, and environments, outcome-level labels are often insufficient for improvement. Most failure taxonomies do little to resolve this problem because they are benchmark-specific and lack a shared structure. We introduce an interaction-centric taxonomy that localizes failures to the interactions in which they originate and identifies the responsible component. It organizes 41 failure modes by assigning each to an edge between two components and a fault side indicating where the repair belongs. This makes the taxonomy actionable: model-side failures identify targets for post-training, harness-side failures point to scaffolding and tool-integration fixes, and environment or grader failures reveal evaluation conditions requiring redesign. The schema applies across agent architectures, from coding assistants to long-horizon personal assistants and multi-agent systems. We ground the taxonomy in worked examples from public benchmarks, model system cards, published reports, and logged agent trajectories, and evaluate its reproducibility using independent reasoning agents as judges. Across four frontier models, the strongest judge reaches Cohen's κ=0.76 against human category labels, suggesting that the categories capture shared structure rather than annotator-specific preferences.

Large Language Models (LLMs) often generate code with subtle but critical bugs, especially for complex tasks. Existing automated repair methods typically rely on superficial pass/fail signals, offering limited visibility into program behavior and hindering precise error localization. In addition, without a way to learn from prior failures, repair processes often fall into repetitive and inefficient cycles. To overcome these challenges, we present TraceCoder, a collaborative multi-agent framework that emulates the observe-analyze-repair process of human experts. The framework first instruments the code with diagnostic probes to capture fine-grained runtime traces, enabling deep insight into its internal execution. It then conducts causal analysis on these traces to accurately identify the root cause of the failure. This process is further enhanced by a novel Historical Lesson Learning Mechanism (HLLM), which distills insights from prior failed repair attempts to inform subsequent correction strategies and prevent recurrence of similar mistakes. To ensure stable convergence, a Rollback Mechanism enforces that each repair iteration constitutes a strict improvement toward the correct solution. Comprehensive experiments across multiple benchmarks show that TraceCoder achieves up to a 34.43\% relative improvement in Pass@1 accuracy over existing advanced baselines. Ablation studies verify the significance of each system component, with the iterative repair process alone contributing a 65.61\% relative gain in accuracy. Furthermore, TraceCoder significantly outperforms leading iterative methods in terms of both accuracy and cost-efficiency.

Deep Reinforcement Learning (DRL) has proven effective in learning control policies using robotic grippers, but much less practical for solving the problem of grasping with dexterous hands -- especially on real robotic platforms -- due to the high dimensionality of the problem. In this work, we focus on the multi-fingered grasping task with the anthropomorphic hand of the iCub humanoid. We propose the RESidual learning with PREtrained CriTics (RESPRECT) method that, starting from a policy pre-trained on a large set of objects, can learn a residual policy to grasp a novel object in a fraction (sim 5 times faster) of the timesteps required to train a policy from scratch, without requiring any task demonstration. To our knowledge, this is the first Residual Reinforcement Learning (RRL) approach that learns a residual policy on top of another policy pre-trained with DRL. We exploit some components of the pre-trained policy during residual learning that further speed-up the training. We benchmark our results in the iCub simulated environment, and we show that RESPRECT can be effectively used to learn a multi-fingered grasping policy on the real iCub robot. The code to reproduce the experiments is released together with the paper with an open source license.

Information retrieval systems are crucial for enabling effective access to large document collections. Recent approaches have leveraged Large Language Models (LLMs) to enhance retrieval performance through query augmentation, but often rely on expensive supervised learning or distillation techniques that require significant computational resources and hand-labeled data. We introduce DeepRetrieval, a reinforcement learning (RL) approach that trains LLMs for query generation through trial and error without supervised data (reference query). Using retrieval metrics as rewards, our system generates queries that maximize retrieval performance. DeepRetrieval outperforms leading methods on literature search with 65.07% (vs. previous SOTA 24.68%) recall for publication search and 63.18% (vs. previous SOTA 32.11%) recall for trial search using real-world search engines. DeepRetrieval also dominates in evidence-seeking retrieval, classic information retrieval and SQL database search. With only 3B parameters, it outperforms industry-leading models like GPT-4o and Claude-3.5-Sonnet on 11/13 datasets. These results demonstrate that our RL approach offers a more efficient and effective paradigm for information retrieval. Our data and code are available at: https://github.com/pat-jj/DeepRetrieval.

Hypernetwork-based methods such as Doc-to-LoRA internalize a document into an LLM's weights in a single forward pass, but they fail systematically on conflicts: when the document contradicts pretraining knowledge, accuracy collapses to 46.4% on the deepest facts. We show the failure is a magnitude problem rather than a representational one. The hypernetwork already targets the right layers, but its adapter margin is approximately constant across documents while the pretrained margin grows with training frequency, so deep conflicts lose by construction. The account predicts that failure should track prior strength: sorting 194 conflicts by the base model's log-probability on the contradicted fact, baseline accuracy falls from 68% on weak-prior questions to 16% on strong-prior ones, a 52 percentage-point gap. The cure is amplitude. Selective Layer Boosting scales the adapter at its top-norm layers, and Conflict-Aware Internalization triggers boosting only when the base model is confident. Both are training-free; together they raise deep-conflict accuracy from 46.4% to 71.0% on Gemma-2B and from 53.6% to 72.5% on Mistral-7B while preserving novel-knowledge recall, and beat vanilla retrieval-augmented generation on medium conflicts by 18 percentage points despite operating entirely in parameter space. We release KID-Bench, a 489-question benchmark that separates novel recall, cross-knowledge combination, and prior-graded conflicts.

Computer-use agents, which leverage multimodal large language models (MLLMs) to operate computers and complete tasks, have attracted significant attention for their utility and versatility. A major challenge in developing these agents is collecting large-scale, high-quality trajectories. The standard approach generates synthetic data through a self-improving loop: an agent is placed in a verifiable environment and iteratively fine-tuned on its successful trajectories. Despite its effectiveness, this paradigm exploits only successful trajectories and discards the failed ones, even though failures carry rich information about a model's weaknesses. In this work, we explore a complementary failure-driven self-improvement loop, a data-centric paradigm that turns failed trajectories into agent improvements. Specifically, we employ an LLM to diagnose failure modes, propose inference-time solutions, and generate code patches -- lightly verified by humans -- that upgrade the agent. We validate this approach with the state-of-the-art OpenCUA-72B model on the OSWorld benchmark, improving the success rate from 42.3% to 48.9%, a gain of 6.6 percentage points, without any additional training cost and with only modest inference overhead. Our results demonstrate that failure-driven self-improvement is a viable complement to success-based pipelines, enabling more efficient agent improvement.

AI agents often fail in ways that are difficult to localize because executions are probabilistic, long-horizon, multi-agent, and mediated by noisy tool outputs. We address this gap by manually annotating failed agent runs and release a novel benchmark of 115 failed trajectories spanning structured API workflows, incident management, and open-ended web/file tasks. Each trajectory is annotated with a critical failure step and a category from a grounded-theory derived, cross-domain failure taxonomy. To mitigate the human cost of failure attribution, we present AGENTRX, an automated domain-agnostic diagnostic framework that pinpoints the critical failure step in a failed agent trajectory. It synthesizes constraints, evaluates them step-by-step, and produces an auditable validation log of constraint violations with associated evidence; an LLM-based judge uses this log to localize the critical step and category. Our framework improves step localization and failure attribution over existing baselines across three domains.

Fine-tuning multi-turn dialogue systems requires high-quality supervision but often suffers from degraded performance when exposed to low-quality data. Supervision errors in early turns can propagate across subsequent turns, undermining coherence and response quality. Existing methods typically address data quality via static prefiltering, which decouples quality control from training and fails to mitigate turn-level error propagation. In this context, we propose ReSURE (Regularizing Supervision UnREliability), an adaptive learning method that dynamically down-weights unreliable supervision without explicit filtering. ReSURE estimates per-turn loss distributions using Welford's online statistics and reweights sample losses on the fly accordingly. Experiments on both single-source and mixed-quality datasets show improved stability and response quality. Notably, ReSURE enjoys positive Spearman correlations (0.21 ~ 1.0 across multiple benchmarks) between response scores and number of samples regardless of data quality, which potentially paves the way for utilizing large-scale data effectively. Code is publicly available at https://github.com/Elvin-Yiming-Du/ReSURE_Multi_Turn_Training.

Uncertainty in perception, actuation, and the environment often require multiple attempts for a robotic task to be successful. We study a class of problems providing (1) low-entropy indicators of terminal success / failure, and (2) unreliable (high-entropy) data to predict the final outcome of an ongoing task. Examples include a robot trying to connect with a charging station, parallel parking, or assembling a tightly-fitting part. The ability to restart after predicting failure early, versus simply running to failure, can significantly decrease the makespan, that is, the total time to completion, with the drawback of potentially short-cutting an otherwise successful operation. Assuming task running times to be Poisson distributed, and using a Markov Jump process to capture the dynamics of the underlying Markov Decision Process, we derive a closed form solution that predicts makespan based on the confusion matrix of the failure predictor. This allows the robot to learn failure prediction in a production environment, and only adopt a preemptive policy when it actually saves time. We demonstrate this approach using a robotic peg-in-hole assembly problem using a real robotic system. Failures are predicted by a dilated convolutional network based on force-torque data, showing an average makespan reduction from 101s to 81s (N=120, p<0.05). We posit that the proposed algorithm generalizes to any robotic behavior with an unambiguous terminal reward, with wide ranging applications on how robots can learn and improve their behaviors in the wild.

Imitation learning (IL) with generative models, such as diffusion and flow matching, has enabled robots to perform complex, long-horizon tasks. However, distribution shifts from unseen environments or compounding action errors can still cause unpredictable and unsafe behavior, leading to task failure. Early failure prediction during runtime is therefore essential for deploying robots in human-centered and safety-critical environments. We propose FIPER, a general framework for Failure Prediction at Runtime for generative IL policies that does not require failure data. FIPER identifies two key indicators of impending failure: (i) out-of-distribution (OOD) observations detected via random network distillation in the policy's embedding space, and (ii) high uncertainty in generated actions measured by a novel action-chunk entropy score. Both failure prediction scores are calibrated using a small set of successful rollouts via conformal prediction. A failure alarm is triggered when both indicators, aggregated over short time windows, exceed their thresholds. We evaluate FIPER across five simulation and real-world environments involving diverse failure modes. Our results demonstrate that FIPER better distinguishes actual failures from benign OOD situations and predicts failures more accurately and earlier than existing methods. We thus consider this work an important step towards more interpretable and safer generative robot policies. Code, data and videos are available at https://tum-lsy.github.io/fiper_website.

We report a case study of four end-to-end attempts to autonomously generate ML research papers using a pipeline of six LLM agents mapped to stages of the scientific workflow. Of these four, three attempts failed during implementation or evaluation. One completed the pipeline and was accepted to Agents4Science 2025, an experimental inaugural venue that required AI systems as first authors, passing both human and multi-AI review. From these attempts, we document six recurring failure modes: bias toward training data defaults, implementation drift under execution pressure, memory and context degradation across long-horizon tasks, overexcitement that declares success despite obvious failures, insufficient domain intelligence, and weak scientific taste in experimental design. We conclude by discussing four design principles for more robust AI-scientist systems, implications for autonomous scientific discovery, and we release all prompts, artifacts, and outputs at https://github.com/Lossfunk/ai-scientist-artefacts-v1

One-shot Program-of-Thought (PoT) emits a Python program that prints a primitive-action plan; a single invalid action silently invalidates the trajectory. We introduce RePoT (Recoverable PoT): a deterministic verified replay that walks the plan through the environment to its first invalid transition, then one LLM call that resumes from the verified prefix. RePoT costs at most one extra LLM call on the ~14% of problems where PoT fails. RePoT beats PoT by +3 to +11pp across four closed-model configurations on PuzzleZoo-775 and peaks at 96.9% vs 86.3% on gpt-5.4-mini-medium; against the matched-budget PoT-retry baseline, RePoT wins decisively on Gemini (+3.8pp, 95% CI [+2.2,+5.4]), is within sampling noise on GPT-medium and Claude, and loses on GPT-mini -- a capability-scaling pattern we begin to address with Adaptive RePoT, a rule-based dispatcher that routes between suffix repair and a fresh PoT retry based on verified-prefix length (preliminary). We replicate on PlanBench Blocksworld (+1.1 to +11.4pp) and on four open-weights models (+3.3 to +20.0pp on three of four). On Derail-550, our controlled recovery benchmark, every condition with access to checkpoint information clears >=30% on GPT-medium and >=70% on Gemini, vs <=3.1% for error-only feedback -- showing that checkpoint information, not the specific verified-prefix tail, is the load-bearing recovery signal.

Multimodal large language models (MLLMs) often fail to transfer safety capabilities learned in the text modality to semantically equivalent non-text inputs, revealing a persistent multimodal safety gap. We study this gap from a representation-geometric perspective by analyzing a text-aligned refusal direction and a modality-induced drift direction. We show that multimodal inputs compress the usable separation along the refusal direction, making it no longer reliable for identifying and refusing harmful inputs. We refer to this failure mode as Safety Geometry Collapse. We quantify it through conditional refusal separability and show that stronger modality-induced drift is consistently associated with weaker refusal separability and higher attack success rates. We then validate the causal role of modality-induced drift through a fixed-strength activation intervention: counteracting the estimated drift restores refusal separability and improves multimodal safety. After drift correction, we further observe self-rectification, where the model recovers its ability to recognize and refuse harmful multimodal inputs during forward dynamics. This effect also provides an internal signal of the model's perceived harmfulness of each input. Motivated by this signal, we propose ReGap, a training-free inference-time method that adaptively corrects modality drift using self-rectification. Experiments across multiple multimodal safety benchmarks and utility benchmarks demonstrate the effectiveness of ReGap, which significantly improves the safety of MLLMs without compromising general capabilities. Our findings highlight representation-level modality alignment as a crucial direction for real-time safety improvement and for building safer, more reliable MLLMs.

Accurate remaining useful life (RUL) prediction hinges on the quality of health indicators (HIs), yet existing methods often fail to disentangle complex degradation mechanisms in multi-sensor systems or quantify uncertainty in HI reliability. This paper introduces a novel framework for HI construction, advancing three key contributions. First, we adapt Reconstruction along Projected Pathways (RaPP) as a health indicator (HI) for RUL prediction for the first time, showing that it outperforms traditional reconstruction error metrics. Second, we show that augmenting RaPP-derived HIs with aleatoric and epistemic uncertainty quantification (UQ) via Monte Carlo dropout and probabilistic latent spaces- significantly improves RUL-prediction robustness. Third, and most critically, we propose indicator groups, a paradigm that isolates sensor subsets to model system-specific degradations, giving rise to our novel method, I-GLIDE which enables interpretable, mechanism-specific diagnostics. Evaluated on data sourced from aerospace and manufacturing systems, our approach achieves marked improvements in accuracy and generalizability compared to state-of-the-art HI methods while providing actionable insights into system failure pathways. This work bridges the gap between anomaly detection and prognostics, offering a principled framework for uncertainty-aware degradation modeling in complex systems.

Existing guardrail systems for large language model agents operate as binary classifiers that block unsafe content, leaving organizations to discard failing outputs and retry from scratch. We introduce RAIL Guard, a closed-loop responsible AI pipeline that evaluates LLM outputs across eight measurable dimensions and iteratively remediates failing outputs through an evaluate-rewrite-reevaluate loop. We evaluate the pipeline across three experiments on four frontier LLMs and 4,276 content outputs plus 6,400 agent tool-call scenarios. Closed-loop remediation achieves 96.9% convergence versus 49.1% for block-and-retry, though the highest-convergence method reduces utility by 22.3%; feedback-driven self-repair achieves 86.6% convergence on fixable dimensions with no significant utility loss (p = 0.177). Pre-tool-call evaluation reduces unsafe agent executions by 33% (p = 0.007) with zero impact on task completion. We identify a key distinction between fixable dimensions that respond to remediation and structural dimensions (Transparency at 93.0%, Accountability at 92.8%, and Inclusivity at 82.5% failure) that require architectural rather than algorithmic solutions. The system is available as open-source SDKs.

Vision-Language-Action (VLA) models have demonstrated strong generalization in robotic manipulation, yet existing evaluations are primarily conducted in simulation or on expensive robotic platforms, leaving their robustness on affordable real-world robots largely unexplored. We present a standardized real-world benchmark for evaluating representative VLA and imitation learning policies on the low-cost SO-101 robotic platform. The benchmark comprises four representative manipulation tasks together with unified evaluation protocols, enabling systematic comparison under embodiment uncertainty. Using real-world teleoperated demonstrations, we fine-tune and evaluate π_{0.5}, SmolVLA, Wall-X, and ACT directly on the physical platform. Beyond conventional task success rates, the benchmark incorporates a structured failure taxonomy, semantic- and execution-level failure decomposition, and recovery-aware evaluation metrics to characterize policy robustness. Experimental results show that stronger pretrained VLA policies generally outperform the imitation learning baseline, although performance remains highly task-dependent under low-cost robotic deployment conditions. Execution instability emerges as the dominant failure source, while recovery capability varies substantially across architectures. These results highlight the importance of failure and recovery analysis beyond binary task success and establish SO-101 as a practical benchmark for evaluating embodied AI systems under realistic low-cost robotic deployment conditions.

When a phone-use agent avoids harm, does that show safety, or simply inability to act? Existing evaluations often cannot tell. A harmful outcome may be avoided because the agent recognized the risk and chose the safe action, or because it failed to understand the screen or execute any relevant action at all. These cases have different causes and call for different fixes, yet current benchmarks often merge them under task success, refusal, or final harmful outcome. We address this problem with PhoneSafety, a benchmark of 700 safety-critical moments drawn from real phone interactions across more than 130 apps. Each instance isolates the next decision at a risky moment and asks a simple question: does the model take the safe action, take the unsafe action, or fail to do anything useful? We evaluate eight representative phone-use agents under this framework. Our results reveal two main patterns. First, stronger general phone-use ability does not reliably imply safer choices at risky moments. Models that perform better on ordinary app tasks are not always the ones that behave more safely when the next action matters. Second, failures to do anything useful behave like a capability signal rather than a safety signal: they are concentrated in more visually and operationally demanding settings and remain stable when the evaluation protocol changes. Across models, failures split into two recurring patterns: unsafe choices in settings where the model can act but chooses wrongly, and inability to act in more visually and operationally demanding screens. Overall, a harmless outcome is not enough to count as evidence of safety. Evaluating phone-use agents requires separating unsafe judgment from inability to act.

Vision-Language-Action (VLA) models can generalize across diverse manipulation tasks, but their imitation-learning-based policies remain brittle in precise physical interactions due to compounding execution errors; Can a reinforcement learning policy trained purely in simulation improve the robustness of real-world VLAs zero-shot? Residual RL, which learns a corrective policy on top of a frozen VLA, offers a natural framework, but existing approaches face a fundamental sim-to-real dilemma: privileged-state methods require lossy distillation for deployment; image-based methods suffer from the visual domain gap; and real-world RL is costly and unsafe. We propose an object-centric residual RL framework that refines VLA actions using object poses, enabling a compact observation space that transfers consistently between simulation and reality. To align the two domains, we additionally replay the same teleoperation demonstrations in simulation to train a sim counterpart of the real-world VLA. The residual RL policy is trained only in simulation with pose noise injection and dropout, and transfers zero-shot to the real robot. Across five manipulation tasks on a real Franka Research 3 (FR3) robot, our method improves the success rate from 42% to 76% zero-shot, and the improved rollouts can be further reused to retrain the base VLA for self-improvement without additional teleoperation. Project page: https://www.microsoft.com/en-us/research/articles/object-centric-residual-rl/

Existing benchmarks measure capability -- whether a model succeeds on a single attempt -- but production deployments require reliability -- consistent success across repeated attempts on tasks of varying duration. We show these properties diverge systematically as task duration grows, and that pass@1 on short tasks is structurally blind to this divergence. We introduce a reliability science framework for long-horizon LLM agents with four metrics: Reliability Decay Curve (RDC), Variance Amplification Factor (VAF), Graceful Degradation Score (GDS), and Meltdown Onset Point (MOP). We evaluate 10 models across 23,392 episodes on a 396-task benchmark spanning four duration buckets and three domains. Key findings: (1) reliability decay is domain-stratified -- SE GDS drops from 0.90 to 0.44 while document processing is nearly flat (0.74 to 0.71); (2) VAF bifurcates by capability tier -- high VAF is a capability signature, not an instability signal; (3) capability and reliability rankings diverge substantially, with multi-rank inversions at long horizons; (4) frontier models have the highest meltdown rates (up to 19%) because they attempt ambitious multi-step strategies that sometimes spiral; and (5) memory scaffolds universally hurt long-horizon performance across all 10 models. These results motivate reliability as a first-class evaluation dimension alongside capability.

Reinforcement Learning with Verifiable Rewards (RLVR) has emerged as an effective approach for improving the reasoning abilities of large language models (LLMs). The Group Relative Policy Optimization (GRPO) family has demonstrated strong performance in training LLMs with RLVR. However, as models train longer and scale larger, more training prompts become residual prompts, those with zero variance rewards that provide no training signal. Consequently, fewer prompts contribute to training, reducing diversity and hindering effectiveness. To fully exploit these residual prompts, we propose the Explore Residual Prompts in Policy Optimization (ERPO) framework, which encourages exploration on residual prompts and reactivates their training signals. ERPO maintains a history tracker for each prompt and adaptively increases the sampling temperature for residual prompts that previously produced all correct responses. This encourages the model to generate more diverse reasoning traces, introducing incorrect responses that revive training signals. Empirical results on the Qwen2.5 series demonstrate that ERPO consistently surpasses strong baselines across multiple mathematical reasoning benchmarks.

Web-agent benchmarks overwhelmingly measure depth -- pinning one obscure answer behind a chain of constraints -- while breadth, exhaustively enumerating a closed set and filling each item's attributes, is barely evaluated, especially outside English. Breadth is also hard to build: certifying that a gold set is complete and every cell correct is far costlier than checking a single answer. I introduce Ko-WideSearch, a Korean breadth-search benchmark built by an automated synthesize-and-verify pipeline. Each task names a set-parent entity -- a TV season, a dynasty, a league, an administrative region, an election -- and asks for its full membership plus a per-item attribute table, graded by Item-, Column-, and Row-F1. It spans 228 tables over 190 entities and sixteen categories across three difficulty tiers, set by two structural knobs I dial independently -- table width and a 2-D composite key -- so cross-product membership climbs from 0\% to 100\% across the tiers. A single normalization-aware comparator is shared between gold construction and grading, so stable date and count columns are not over-dropped on formatting alone. Across twenty web agents, the failure is consistent: agents recover the set but not the rows (e.g.\ Item-F1 92.8 against Row-F1 53.7), accuracy falls steadily as the knobs harden, and neither more search nor more spend closes the gap. Broken down by cell, the hard part is finding the right value, not formatting it: open-ended free-text cells fail most, while cells with a standard answer such as a date or a name usually come out right.

AI systems can fail silently. The failure propagates through training loops, evaluation pipelines, and production monitoring stacks until downstream harm makes it visible. This paper introduces evaluation blindness: a measurement function M exhibits evaluation blindness with respect to failure class F when it produces readings indistinguishable from a healthy state while the system is actually failing, with no auxiliary signal flagging the gap. The problem surfaces at two lifecycle stages the literature has treated separately. At training time, reward models are gamed, importance-sampling corrections are silently miscalculated, and benchmark contamination inflates fine-tuning evaluations, all while loss curves look healthy and gradient updates proceed normally. At deployment time, monitoring fails to catch six classes of production failure, including an Operational category that is 100% silent by structural definition. We provide a formal detectability predicate unifying both stages. Four training-time case studies trace concrete breakdowns, including a real implementation bug in TRL PR #6594 where gradients are corrupted as loss decreases normally. A six-class taxonomy validated against 50 real-world incidents from court documents and regulatory filings finds that 53% of verifiable public failures were silent. A failure budget framework ties acceptable failure rates to use-case risk class. The implication is direct: measurement infrastructure is a correctness concern across the full AI lifecycle, not just at evaluation time. Data, code, and taxonomy schema are at https://github.com/priyanka25aug/llm-failure-taxonomy.

Large-scale AI training is now fundamentally a distributed systems problem, and hardware failures have become routine operating conditions rather than rare exceptions. Public operational evidence from production training clusters, however, remains scarce. This technical report presents an empirical analysis of a 63-node NVIDIA B200 production cluster (504 GPUs), using 55 days of Prometheus time-series data and 73 days of operational logs covering 224 multi-node training sessions. The cluster operates within a cross-organizational environment in which five parties (SKT, Upstage, Lablup, NVIDIA Korea, and VAST Data) share a unified monitoring pipeline. This arrangement enabled joint diagnosis of a 60-node-scale storage I/O bottleneck that did not appear at 2-4-node scale, a production-scale phenomenon no single team could isolate alone. Drawing on a months-long pre-training campaign, we perform three quantitative analyses yielding four findings. First, statistical analysis over 751 Prometheus metrics and 10 XID-identified GPU failures achieves a 10/10 detection rate (2/10 pre-XID) at ~0.84 false positives per day. No single metric is consistently dominant across failure types, motivating a multi-signal detection strategy. Second, profiling 523 checkpoint events along the GPU VRAM to NFS path attributes the "bandwidth paradox" (1.4-10.4% utilization of 200 Gbps RoCE) to saturation of the 128-slot NFS RPC layer. Third, multi-node failure response shows concentrated exclusions (top 3 of 63 nodes account for >50% of all exclusions) and an auto-retry chain success rate of 33.3% over 12 chains (73 attempts), 2.7x the 12.5% manual recovery rate; the median retry interval is 11 min (IQR 10-11). All analyses are grounded in production infrastructure providing session-level workload management, GPU-centric scheduling, and unified observability.

Software engineers develop, fine-tune, and deploy deep learning (DL) models. They use and re-use models in a variety of development frameworks and deploy them on a range of runtime environments. In this diverse ecosystem, engineers use DL model converters to move models from frameworks to runtime environments. However, errors in converters can compromise model quality and disrupt deployment. The failure frequency and failure modes of DL model converters are unknown. In this paper, we conduct the first failure analysis on DL model converters. Specifically, we characterize failures in model converters associated with ONNX (Open Neural Network eXchange). We analyze past failures in the ONNX converters in two major DL frameworks, PyTorch and TensorFlow. The symptoms, causes, and locations of failures (for N=200 issues), and trends over time are also reported. We also evaluate present-day failures by converting 8,797 models, both real-world and synthetically generated instances. The consistent result from both parts of the study is that DL model converters commonly fail by producing models that exhibit incorrect behavior: 33% of past failures and 8% of converted models fell into this category. Our results motivate future research on making DL software simpler to maintain, extend, and validate.

Imitation learning has enabled robots to acquire complex visuomotor manipulation skills from demonstrations, but deployment failures remain a major obstacle, especially for long-horizon action-chunked policies. Once execution drifts off the demonstration manifold, these policies often continue producing locally plausible actions without recovering from the failure. Existing runtime monitors either require failure data, over-trigger under benign feature drift, or stop at failure detection without providing a recovery mechanism. We present Rewind-IL, a training-free online safeguard framework for generative action-chunked imitation policies. Rewind-IL combines a zero-shot failure detector based on Temporal Inter-chunk Discrepancy Estimate (TIDE), calibrated with split conformal prediction, with a state-respawning mechanism that returns the robot to a semantically verified safe intermediate state. Offline, a vision-language model identifies recovery checkpoints in demonstrations, and the frozen policy encoder is used to construct a compact checkpoint feature database. Online, Rewind-IL monitors self-consistency in overlapping action chunks, tracks similarity to the checkpoint library, and, upon failure, rewinds execution to the latest verified safe state before restarting inference from a clean policy state. Experiments on real-world and simulated long-horizon manipulation tasks, including transfer to flow-matching action-chunked policies, demonstrate that policy-internal consistency coupled with semantically grounded respawning offers a practical route to improved reliability in imitation learning. Supplemental materials are available at https://sjay05.github.io/rewind-il

One of the core pillars of efficient deep learning methods is architectural improvements such as the residual/skip connection, which has led to significantly better model convergence and quality. Since then the residual connection has become ubiquitous in not just convolutional neural networks but also transformer-based architectures, the backbone of LLMs. In this paper we introduce Learned Augmented Residual Layer (LAuReL) -- a novel generalization of the canonical residual connection -- with the goal to be an in-situ replacement of the latter while outperforming on both model quality and footprint metrics. Our experiments show that using \laurel can help boost performance for both vision and language models. For example, on the ResNet-50, ImageNet 1K task, it achieves 60% of the gains from adding an extra layer, while only adding 0.003% more parameters, and matches it while adding 2.6times fewer parameters.

Sparse Autoencoders (SAEs) decompose residual-stream activations into interpretable features. Recent latent-space defenses increasingly rely on these decompositions, assuming that identified "unsafe" SAE features serve as actionable handles for monitoring and intervention. In this paradigm, clamping a specific harmful feature is expected to reliably prevent model misbehavior. However, we show that this success may hide a recoverable failure mode: the clamp may block one visible route to a behavior without eliminating the behavior itself. We formulate this vulnerability as post-intervention recovery, a constrained residual-space optimization problem. Starting from the post-intervention residual state, we optimize residual perturbations to recover the pre-intervention behavior while preserving the post-intervention values of the targeted SAE features. Even under a strong threat model where the intervention remains active throughout optimization and generation, recovery remains possible. To rule out that recovery simply undoes the intervention, we use encoder-orthogonal updates for single-layer interventions and the corresponding feature-map Jacobian in the cross-layer setting. Across TPP, unlearning, IOI, and refusal steering experiments, this stress test reveals recoverable behavior despite successful feature-level intervention. Especially in the safety-critical refusal-steering setting, we achieve a 95.8% recovery rate on valid samples while keeping defended-feature relative drift to 0.131, substantially below suffix-based baselines. A recovery-path attribution analysis further localizes this recovery to the SAE reconstruction residual, the component left unexplained by the SAE. These results expose a gap between feature-level control and behavioral completeness: SAE features can support causal intervention, but controlling them does not guarantee control over the underlying behavior.

Adapting to concept drift is a challenging task in machine learning, which is usually tackled using incremental learning techniques that periodically re-fit a learning model leveraging newly available data. A primary limitation of these techniques is their reliance on substantial amounts of data for retraining. The necessity of acquiring fresh data introduces temporal delays prior to retraining, potentially rendering the models inaccurate if a sudden concept drift occurs in-between two consecutive retrainings. In communication networks, such issue emerges when performing traffic forecasting following a~failure event: post-failure re-routing may induce a drastic shift in distribution and pattern of traffic data, thus requiring a timely model adaptation. In this work, we address this challenge for the problem of traffic forecasting and propose an approach that exploits adaptive learning algorithms, namely, liquid neural networks, which are capable of self-adaptation to abrupt changes in data patterns without requiring any retraining. Through extensive simulations of failure scenarios, we compare the predictive performance of our proposed approach to that of a reference method based on incremental learning. Experimental results show that our proposed approach outperforms incremental learning-based methods in situations where the shifts in traffic patterns are drastic.

This study investigates the application of deep residual networks for predicting the dynamics of interacting three-dimensional rigid bodies. We present a framework combining a 3D physics simulator implemented in C++ with a deep learning model constructed using PyTorch. The simulator generates training data encompassing linear and angular motion, elastic collisions, fluid friction, gravitational effects, and damping. Our deep residual network, consisting of an input layer, multiple residual blocks, and an output layer, is designed to handle the complexities of 3D dynamics. We evaluate the network's performance using a datasetof 10,000 simulated scenarios, each involving 3-5 interacting rigid bodies. The model achieves a mean squared error of 0.015 for position predictions and 0.022 for orientation predictions, representing a 25% improvement over baseline methods. Our results demonstrate the network's ability to capture intricate physical interactions, with particular success in predicting elastic collisions and rotational dynamics. This work significantly contributes to physics-informed machine learning by showcasing the immense potential of deep residual networks in modeling complex 3D physical systems. We discuss our approach's limitations and propose future directions for improving generalization to more diverse object shapes and materials.

Deep residual networks were shown to be able to scale up to thousands of layers and still have improving performance. However, each fraction of a percent of improved accuracy costs nearly doubling the number of layers, and so training very deep residual networks has a problem of diminishing feature reuse, which makes these networks very slow to train. To tackle these problems, in this paper we conduct a detailed experimental study on the architecture of ResNet blocks, based on which we propose a novel architecture where we decrease depth and increase width of residual networks. We call the resulting network structures wide residual networks (WRNs) and show that these are far superior over their commonly used thin and very deep counterparts. For example, we demonstrate that even a simple 16-layer-deep wide residual network outperforms in accuracy and efficiency all previous deep residual networks, including thousand-layer-deep networks, achieving new state-of-the-art results on CIFAR, SVHN, COCO, and significant improvements on ImageNet. Our code and models are available at https://github.com/szagoruyko/wide-residual-networks

Reinforcement Learning with Verifiable Rewards (RLVR) is widely used to improve reasoning in multiple domains, yet outcome-only scalar rewards are often sparse and uninformative, especially on failed samples, where they merely indicate failure and provide no insight into why the reasoning fails. In this paper, we investigate how to leverage richer verbal feedback to guide RLVR training on failed samples, and how to convert such feedback into a trainable learning signal. Specifically, we propose a multi-turn feedback-guided reinforcement learning framework. It builds on three mechanisms: (1) dynamic multi-turn regeneration guided by feedback, triggered only on failed samples, (2) two complementary learning signals for within-turn and cross-turn optimization, and (3) structured feedback injection into the model's reasoning process. Trained on sampled OpenR1-Math, the approach outperforms supervised fine-tuning and RLVR baselines in-domain and generalizes well out-of-domain.

While GUI agents have advanced rapidly, they often lack the robustness to recover from their own errors, hindering real-world deployment. To bridge this gap at both the evaluation and data levels, we introduce GUI-RobustEval and propose Robustness-driven Trajectory Synthesis. GUI-RobustEval contains 1,216 executable test cases that systematically measure error recovery capabilities across a broad and realistic spectrum of error modes. At the data level, RoTS is a scalable synthesis framework that creates 800k high-quality data via a tree-based pipeline that proactively discovers diverse error modes and synthesizes corresponding recovery steps. Our two models, RoTS-7B and RoTS-32B, fine-tuned on our dataset, both demonstrate significant gains on GUI-RobustEval and traditional GUI benchmarks. Notably, RoTS-32B achieves state-of-the-art performance on OSWorld, with a 47.4% success rate and a 33.8% All-Pass@4 score, suggesting that improved long-horizon error recovery ability contributes to both robustness and overall performance. Our code is available at https://github.com/AlibabaResearch/RoTS.

Tool-using LLM agents face a reliability-cost tradeoff: routing every decision through the LLM improves correctness but incurs high latency and inference cost, while pre-coded workflow graphs reduce cost but become brittle under unanticipated compound tool failures. We present Self-Healing Router, a fault-tolerant orchestration architecture that treats most agent control-flow decisions as routing rather than reasoning. The system combines (i) parallel health monitors that assign priority scores to runtime conditions such as tool outages and risk signals, and (ii) a cost-weighted tool graph where Dijkstra's algorithm performs deterministic shortest-path routing. When a tool fails mid-execution, its edges are reweighted to infinity and the path is recomputed -- yielding automatic recovery without invoking the LLM. The LLM is reserved exclusively for cases where no feasible path exists, enabling goal demotion or escalation. Prior graph-based tool-use systems (ControlLLM, ToolNet, NaviAgent) focus on tool selection and planning; our contribution is runtime fault tolerance with deterministic recovery and binary observability -- every failure is either a logged reroute or an explicit escalation, never a silent skip. Across 19 scenarios spanning three graph topologies (linear pipeline, dependency DAG, parallel fan-out), Self-Healing Router matches ReAct's correctness while reducing control-plane LLM calls by 93% (9 vs 123 aggregate) and eliminating the silent-failure cases observed in a well-engineered static workflow baseline under compound failures.

Memory is becoming a core component of long-horizon AI agents, allowing agents to reuse past experience when operating web browsers, software tools, and other interactive environments. Existing work mostly treats memory as a supply problem, asking what experience to write, how to store it, and which entry to retrieve for the next task. Yet we still lack a clear account of how models consume retrieved memory across a multi-step action trajectory. This consumption process matters because it determines not only what memories should be retrieved, but also what models and control policies are needed to use them safely. To diagnose this process, we propose Entry--Propagation--Recovery (E-P-R), a trajectory-level framework that asks where memory first changes an action, whether that change carries forward, and whether the agent can recover after leaving a correct path. We instantiate E-P-R on WebArena and on MemTrapBench, a controlled benchmark we build to isolate these phases. We find that the main failure often begins at entry: agents adopt conflicting memory at the first exposed decision point even when it is task-wrong. Repeated exposure then amplifies this early error, while recovery after divergence is weak. Together, these effects create a compliance trap: across models, conflicting memory induces similar compliance rates, but once agents comply, their success rates collapse to a low floor. Stronger agents therefore suffer larger absolute damage because each compliance event erases more baseline capability. These results suggest that memory-augmented agents should be evaluated not only by retrieval quality or final success rate, but by how they consume memory throughout the trajectory.

The influential Residual Networks designed by He et al. remain the gold-standard architecture in numerous scientific publications. They typically serve as the default architecture in studies, or as baselines when new architectures are proposed. Yet there has been significant progress on best practices for training neural networks since the inception of the ResNet architecture in 2015. Novel optimization & data-augmentation have increased the effectiveness of the training recipes. In this paper, we re-evaluate the performance of the vanilla ResNet-50 when trained with a procedure that integrates such advances. We share competitive training settings and pre-trained models in the timm open-source library, with the hope that they will serve as better baselines for future work. For instance, with our more demanding training setting, a vanilla ResNet-50 reaches 80.4% top-1 accuracy at resolution 224x224 on ImageNet-val without extra data or distillation. We also report the performance achieved with popular models with our training procedure.

Supervised Fine-Tuning (SFT) is the standard approach for adapting large language models (LLMs) to downstream tasks. However, we observe a persistent failure mode: even after convergence, models often fail to correctly reproduce a subset of their own supervised training data. We refer to this behavior as the Incomplete Learning Phenomenon(ILP). This paper presents the first systematic study of ILP in LLM fine-tuning. We formalize ILP as post-training failure to internalize supervised instances and demonstrate its prevalence across multiple model families, domains, and datasets. Through controlled analyses, we identify five recurrent sources of incomplete learning: (1) missing prerequisite knowledge in the pre-trained model, (2) conflicts between SFT supervision and pre-training knowledge, (3) internal inconsistencies within SFT data, (4) left-side forgetting during sequential fine-tuning, and (5) insufficient optimization for rare or complex patterns. We introduce a diagnostic-first framework that maps unlearned samples to these causes using observable training and inference signals, and study several targeted mitigation strategies as causal interventions. Experiments on Qwen, LLaMA, and OLMo2 show that incomplete learning is widespread and heterogeneous, and that improvements in aggregate metrics can mask persistent unlearned subsets. The findings highlight the need for fine-grained diagnosis of what supervised fine-tuning fails to learn, and why.

Conversational agents powered by large language models (LLMs) with tool integration achieve strong performance on fixed task-oriented dialogue datasets but remain vulnerable to unanticipated, user-induced errors. Rather than focusing on error prevention, this work focuses on error recovery, which necessitates the accurate diagnosis of erroneous dialogue contexts and execution of proper recovery plans. Under realistic constraints precluding model fine-tuning or prompt modification due to significant cost and time requirements, we explore whether agents can recover from contextually flawed interactions and how their behavior can be adapted without altering model parameters and prompts. To this end, we propose Reasoning Inception (ReIn), a test-time intervention method that plants an initial reasoning into the agent's decision-making process. Specifically, an external inception module identifies predefined errors within the dialogue context and generates recovery plans, which are subsequently integrated into the agent's internal reasoning process to guide corrective actions, without modifying its parameters or system prompts. We evaluate ReIn by systematically simulating conversational failure scenarios that directly hinder successful completion of user goals: user's ambiguous and unsupported requests. Across diverse combinations of agent models and inception modules, ReIn substantially improves task success and generalizes to unseen error types. Moreover, it consistently outperforms explicit prompt-modification approaches, underscoring its utility as an efficient, on-the-fly method. In-depth analysis of its operational mechanism, particularly in relation to instruction hierarchy, indicates that jointly defining recovery tools with ReIn can serve as a safe and effective strategy for improving the resilience of conversational agents without modifying the backbone models or system prompts.

The main objective of Prognostics and Health Management is to estimate the Remaining Useful Lifetime (RUL), namely, the time that a system or a piece of equipment is still in working order before starting to function incorrectly. In recent years, numerous machine learning algorithms have been proposed for RUL estimation, mainly focusing on providing more accurate RUL predictions. However, there are many sources of uncertainty in the problem, such as inherent randomness of systems failure, lack of knowledge regarding their future states, and inaccuracy of the underlying predictive models, making it infeasible to predict the RULs precisely. Hence, it is of utmost importance to quantify the uncertainty alongside the RUL predictions. In this work, we investigate the conformal prediction (CP) framework that represents uncertainty by predicting sets of possible values for the target variable (intervals in the case of RUL) instead of making point predictions. Under very mild technical assumptions, CP formally guarantees that the actual value (true RUL) is covered by the predicted set with a degree of certainty that can be prespecified. We study three CP algorithms to conformalize any single-point RUL predictor and turn it into a valid interval predictor. Finally, we conformalize two single-point RUL predictors, deep convolutional neural networks and gradient boosting, and illustrate their performance on the Commercial Modular Aero-Propulsion System Simulation (C-MAPSS) data sets.

A prevalent assumption in LLM agent deployment holds that more structured harnesses universally improve reliability, and that higher-capability models need proportionally less structural guidance -- together implying a monotone inverse relationship between model capability tier and optimal harness complexity. We test this hypothesis through a controlled 432-run experiment crossing six models across four capability tiers with three harness conditions (light, balanced, strict) on HEAT-24, a 24-task synthetic benchmark with git-based workspace verification. Our results refute the monotone inverse relationship on two fronts. First, for the frontier chat model evaluated (Gemini 2.5 Flash), increased harness verbosity lowers VTSR by 29-38 percentage points -- a harness-complexity paradox. Second, for the frontier reasoning model evaluated (Qwen3.5-122B, extended thinking enabled), strict harness achieves the highest VTSR (91.7%) and the lowest latency, the opposite of the prediction. Within the constrained tier, a 2B model (Gemma4:e2B) matches strong-open-tier stability at 91.7% across all harnesses. Because each tier is represented by a single model in this study, these results should be interpreted as model-specific observations; harness sensitivity appears non-monotone across the models evaluated, and depends critically on model type (chat vs. reasoning). We introduce a six-label failure taxonomy showing that format_violation dominates capable-model failures while wrong_file dominates low-capability failures, and we derive practical tier-aware harness selection guidelines.

ResNets (or Residual Networks) are one of the most commonly used models for image classification tasks. In this project, we design and train a modified ResNet model for CIFAR-10 image classification. In particular, we aimed at maximizing the test accuracy on the CIFAR-10 benchmark while keeping the size of our ResNet model under the specified fixed budget of 5 million trainable parameters. Model size, typically measured as the number of trainable parameters, is important when models need to be stored on devices with limited storage capacity (e.g. IoT/edge devices). In this article, we present our residual network design which has less than 5 million parameters. We show that our ResNet achieves a test accuracy of 96.04% on CIFAR-10 which is much higher than ResNet18 (which has greater than 11 million trainable parameters) when equipped with a number of training strategies and suitable ResNet hyperparameters. Models and code are available at https://github.com/Nikunj-Gupta/Efficient_ResNets.

Robust embodied robots should be able to recover from failures and retry tasks in order to operate reliably in unstructured and noisy real-world environments. Achieving this capability requires training policies on data that captures recovery behaviors. However, collecting such data through robot teleoperation is difficult to scale, as it is time-consuming to induce diverse failure states, perform corrective actions, and reset the environment. This challenge is further exacerbated by the high diversity of failure modes, which demands substantially more recovery data than success demonstrations. In this work, we show that egocentric human data capturing failure recovery processes provides a scalable alternative. By efficiently arranging task-level failure configurations and recording short recovery segments, human operators can generate more than 10x as much valid recovery data per hour compared to robot teleoperation under our protocol. To address the embodiment gap between human and robot, we propose EgoRecovery, a co-training framework for learning recovery behavior, where human recovery demonstrations are aligned to a compact corrective-intent space shared with robot data, which captures the timing and magnitude of correction. Only a small number of robot recovery demonstrations are required to connect this intent to executable robot actions. At deployment, a learned recovery gate predicts when correction is needed from robot observations and activates the corrective intent only in recovery states. Experiments on real-world recovery tasks show that EgoRecovery improves success from failure starts over robot-only recovery, direct co-training with human recovery data, and direct intent-transfer baselines.

Deep residual architectures, such as ResNet and the Transformer, have enabled models of unprecedented depth, yet a formal understanding of why depth is so effective remains an open question. A popular intuition, following Veit et al. (2016), is that these residual networks behave like ensembles of many shallower models. Our key finding is an explicit analytical formula that verifies this ensemble perspective, proving that increasing network depth is mathematically equivalent to expanding the size of this implicit ensemble. Furthermore, our expansion reveals a hierarchical ensemble structure in which the combinatorial growth of computation paths leads to an explosion in the output signal, explaining the historical necessity of normalization layers in training deep models. This insight offers a first principles explanation for the historical dependence on normalization layers and sheds new light on a family of successful normalization-free techniques like SkipInit and Fixup. However, while these previous approaches infer scaling factors through optimizer analysis or a heuristic analogy to Batch Normalization, our work offers the first explanation derived directly from the network's inherent functional structure. Specifically, our Residual Expansion Theorem reveals that scaling each residual module provides a principled solution to taming the combinatorial explosion inherent to these architectures. We further show that this scaling acts as a capacity controls that also implicitly regularizes the model's complexity.

We introduce a novel class of untrained Recurrent Neural Networks (RNNs) within the Reservoir Computing (RC) paradigm, called Residual Reservoir Memory Networks (ResRMNs). ResRMN combines a linear memory reservoir with a non-linear reservoir, where the latter is based on residual orthogonal connections along the temporal dimension for enhanced long-term propagation of the input. The resulting reservoir state dynamics are studied through the lens of linear stability analysis, and we investigate diverse configurations for the temporal residual connections. The proposed approach is empirically assessed on time-series and pixel-level 1-D classification tasks. Our experimental results highlight the advantages of the proposed approach over other conventional RC models.

Loss Given Default (LGD) modeling faces a fundamental data quality constraint: 90% of available training data consists of proxy estimates based on pre-distress balance sheets rather than actual recovery outcomes from completed bankruptcy proceedings. We demonstrate that this mixture-contaminated training structure causes systematic failure of recursive partitioning methods, with Random Forest achieving negative r-squared (-0.664, worse than predicting the mean) on held-out test data. Information-theoretic approaches based on Shannon entropy and mutual information provide superior generalization, achieving r-squared of 0.191 and RMSE of 0.284 on 1,218 corporate bankruptcies (1980-2023). Analysis reveals that leverage-based features contain 1.510 bits of mutual information while size effects contribute only 0.086 bits, contradicting regulatory assumptions about scale-dependent recovery. These results establish practical guidance for financial institutions deploying LGD models under Basel III requirements when representative outcome data is unavailable at sufficient scale. The findings generalize to medical outcomes research, climate forecasting, and technology reliability-domains where extended observation periods create unavoidable mixture structure in training data.

Analyzing outcomes in long-term cancer survivor studies can be complex. The effects of predictors on the failure process may be difficult to assess over longer periods of time, as the commonly used assumption of proportionality of hazards holding over an extended period is often questionable. In this manuscript, we compare seven different survival models that estimate the hazard rate and the effects of proportional and non-proportional covariates. In particular, we focus on an extension of the the multi-resolution hazard (MRH) estimator, combining a non-proportional hierarchical MRH approach with a data-driven pruning algorithm that allows for computational efficiency and produces robust estimates even in times of few observed failures. Using data from a large-scale randomized prostate cancer clinical trial, we examine patterns of biochemical failure and estimate the time-varying effects of androgen deprivation therapy treatment and other covariates. We compare the impact of different modeling strategies and smoothness assumptions on the estimated treatment effect. Our results show that the benefits of treatment diminish over time, possibly with implications for future treatment protocols.

Proactive interventions by LLM critic models are often assumed to improve reliability, yet their effects at deployment time are poorly understood. We show that a binary LLM critic with strong offline accuracy (AUROC 0.94) can nevertheless cause severe performance degradation, inducing a 26 percentage point (pp) collapse on one model while affecting another by near zero pp. This variability demonstrates that LLM critic accuracy alone is insufficient to determine whether intervention is safe. We identify a disruption-recovery tradeoff: interventions may recover failing trajectories but also disrupt trajectories that would have succeeded. Based on this insight, we propose a pre-deployment test that uses a small pilot of 50 tasks to estimate whether intervention is likely to help or harm, without requiring full deployment. Across benchmarks, the test correctly anticipates outcomes: intervention degrades performance on high-success tasks (0 to -26 pp), while yielding a modest improvement on the high-failure ALFWorld benchmark (+2.8 pp, p=0.014). The primary value of our framework is therefore identifying when not to intervene, preventing severe regressions before deployment.

Forecasts of explosive AI progress hinge on AI agents automating AI research. But evidence on whether agents can carry out open-ended AI research is thin. Current evaluations either test agents on narrow, verifiable tasks, which excludes open-ended research, or submit AI-generated papers to blind peer review, which is overstretched, stochastic, and suffers from poor review quality. We introduce a third way to measure progress towards AI R\&D automation. An agent takes on the central, open-ended research question of a high-quality unpublished paper, and the paper's original authors grade its output. We call these shadow evaluations. We ran shadow evaluations on two unpublished NeurIPS 2026 submissions, giving frontier agents six days and thousands of dollars of compute. The agents completed all of the engineering without human help, yet could not make substantial progress towards answering the research questions. As a result, both papers were unambiguously rejected by the authors. We identify five recurring failure modes: poor judgment about the bar for publishable research, uncreative responses to shortcomings in the research design, ineffective backtracking from dead ends, poor resource awareness, and instruction drift. A robustness check with a second model and scaffold reproduced these failures. We release the expert reviews, survey responses, agent repositories, and logs. Our results provide early evidence that today's agents can do the engineering of AI research, but struggle with critical parts of the research lifecycle.

Reinforcement Learning with Verifiable Rewards (RLVR) enhances reasoning of Large Language Models (LLMs) but usually exhibits limited generation diversity due to the over-incentivization of positive rewards. Although methods like Negative Sample Reinforcement (NSR) mitigate this issue by upweighting penalty from negative samples, they may suppress the semantic distributions shared between positive and negative responses. To boost reasoning ability without losing diversity, this paper proposes negative sample projection Residual Reinforcement Learning (ResRL) that decouples similar semantic distributions among positive and negative responses. We theoretically link Lazy Likelihood Displacement (LLD) to negative-positive head-gradient interference and derive a single-forward proxy that upper-bounds representation alignment to guide conservative advantage reweighting. ResRL then projects negative-token hidden representations onto an SVD-based low-rank positive subspace and uses projection residuals to modulate negative gradients, improving reasoning while preserving diversity and outperforming strong baselines on average across twelve benchmarks spanning Mathematics, Code, Agent Tasks, and Function Calling. Notably, ResRL surpasses NSR on mathematical reasoning by 9.4\% in Avg@16 and 7.0\% in Pass@128. Code is available at https://github.com/1229095296/ResRL.git.

Where an LLM sits in an agent memory pipeline -- between the recall plane that retrieves stored facts (extensively benchmarked) and the control plane that mutates them via supersede, release, purge (largely untested) -- shapes which forgetting failure modes the system recovers. Comparing thirteen system configurations on a 385-case adversarial surface, we observe three placement regimes with partly complementary coverage: deterministic primitives suffice for lexical/temporal categories but fail canonicalization (5% on identifier-obfuscation, 0% on cross-lingual); inscribe-time LLM recovers canonicalization (100%) but cannot help intent-aware deletion (0% on prefix-collision and compound-fact); a mutation-time hook recovers intent-aware deletion (78-85%) and brightens nearly all categories simultaneously (91.7-93.2% overall, $0.17 per 385-case run, 2.3s/case mutation latency vs. 64-191ms/case deterministic, recall path unchanged). We expose the trade-off via ForgetEval, a 1000-case templated suite plus a 385-case adversarial layer (132 hand-crafted + 253 LLM-drafted oracle-validated) scored by deterministic substring match, paired with a six-method Adapter Protocol with honest N/A scoring that lets heterogeneous memory stores enter in 130 lines. Admission is corroborated by 10-annotator IAA (Fleiss' kappa = 0.958) and a 77-case external-authored subset (four blind contributors) that replicates the canonicalization asymmetry and amplifies the joint-placement lift (+27.8 pt). Production failures are predominantly forgetting failures rather than recall failures, yet existing benchmarks measure only recall. ForgetEval and all adapters are released under MIT.

Tool-augmented language agents frequently fail in real-world deployment due to tool malfunctions--timeouts, API exceptions, or inconsistent outputs--triggering cascading reasoning errors and task abandonment. Existing agent training pipelines optimize only for success trajectories, failing to expose models to the tool failures that dominate real-world usage. We propose PALADIN, a generalizable framework for equipping language agents with robust failure recovery capabilities. PALADIN trains on 50,000+ recovery-annotated trajectories constructed via systematic failure injection and expert demonstrations on an enhanced ToolBench dataset. Training uses LoRA-based fine-tuning to retain base capabilities while injecting recovery competence. At inference, PALADIN detects execution-time errors and retrieves the most similar case from a curated bank of 55+ failure exemplars aligned with ToolScan's taxonomy, then executes the corresponding recovery action. This approach generalizes to novel failures beyond the training distribution, retaining 95.2\% recovery performance on unseen tool APIs. Evaluation across PaladinEval and ToolReflectEval demonstrates consistent improvements in Recovery Rate (RR), Task Success Rate (TSR), Catastrophic Success Rate (CSR), and Efficiency Score (ES). PALADIN improves RR from 32.76% to 89.68% (+57% relative) over ToolBench and outperforms the strongest baseline CRITIC (76.34%) by +13.3%. Against vanilla agents, PALADIN achieves 89.86\% RR (+66% relative improvement from 23.75%). These results establish PALADIN as an effective method for building fault-tolerant agents capable of robust recovery in real-world tool environments.

While Multi-Agent Systems (MAS) excel in complex reasoning, they suffer from the cascading impact of erroneous information generated by individual participants. Current solutions often resort to rigid structural engineering or expensive fine-tuning, limiting their deployability and adaptability. We propose AgentDropoutV2, a test-time rectify-or-reject pruning framework designed to dynamically optimize MAS information flow without retraining. Our approach acts as an active firewall, intercepting agent outputs and employing a retrieval-augmented rectifier to iteratively correct errors based on a failure-driven indicator pool. This mechanism allows for the precise identification of potential errors using distilled failure patterns as prior knowledge. Irreparable outputs are subsequently pruned to prevent error propagation, while a fallback strategy preserves system integrity. Empirical results on extensive math benchmarks show that AgentDropoutV2 significantly boosts the MAS's task performance, achieving an average accuracy gain of 6.3 percentage points on math benchmarks. Furthermore, the system exhibits robust generalization and adaptivity, dynamically modulating rectification efforts based on task difficulty while leveraging context-aware indicators to resolve a wide spectrum of error patterns. Our code and dataset are released at https://github.com/TonySY2/AgentDropoutV2.

Retrieval-augmented QA pipelines often route retrieved passages through an LLM rewriter before a smaller reader, lifting F1 by tens of points on multi-hop benchmarks; this gain is typically credited to improved evidence quality. We ask whether that lift is causally driven by the gold answer string appearing in the rewritten context rather than by curation per se, using a controlled intervention audit. For each rewritten context we re-run the reader after one of four controlled edits to the compile output: removing the gold answer span, replacing a length-matched random non-answer span (placebo), or injecting the gold into rewrites where it was absent (at the prefix or at a midpoint sentence boundary). Across twelve completed (cell, baseline) intervention runs spanning three reader families (Qwen2.5-7B, Qwen3.5-35B, GLM-4.7), two datasets (HotpotQA, 2WikiMultihopQA), and three compiler arrangements (MA-only, MB-only, MA+verify), removing the gold answer drops reader F1 by 28 to 64 points beyond the length-matched placebo on paired answer-in-compile strata, and prepending the gold into rewrites that lacked it raises F1 by +0.7 to +9.7 points in 10 of 12 (cell, baseline) combinations. A companion five-sentinel audit shows the conventional single-[MASK] probe is itself sentinel-fragile: on 2Wiki it reports a +4.12~F1 ``non-leakage residual'' that flips to -3.33 to -7.81~F1 under four alternative sentinels and fails an equivalence test for three of those four (1/4~pass). We do not propose a new rewriter or mitigation; we release the intervention runner and the sentinel panel so that other rewriter-gain claims can be tested against the same standard.

Reinforcement learning with verifiable rewards (RLVR) has delivered impressive gains in mathematical and multimodal reasoning and has become a standard post-training paradigm for contemporary language and vision-language models. However, the RLVR recipe introduces a significant risk of capability regression, where models forget foundational skills after prolonged training without employing regularization strategies. We empirically confirm this concern, observing that open-source reasoning models suffer performance degradation on core capabilities such as perception and faithfulness. While imposing regularization terms like KL divergence can help prevent deviation from the base model, these terms are calculated on the current task, thus they do not guarantee broader knowledge. Meanwhile, commonly used experience replay across heterogeneous domains makes it nontrivial to decide how much training focus each objective should receive. To address this, we propose RECAP-a replay strategy with dynamic objective reweighting for general knowledge preservation. Our reweighting mechanism adapts in an online manner using short-horizon signals of convergence and instability, shifting the post-training focus away from saturated objectives and toward underperforming or volatile ones. Our method is end-to-end and readily applicable to existing RLVR pipelines without training additional models or heavy tuning. Extensive experiments on benchmarks based on Qwen2.5-VL-3B and Qwen2.5-VL-7B demonstrate the effectiveness of our method, which not only preserves general capabilities but also improves reasoning by enabling more flexible trade-offs among in-task rewards.

This work proposes a Residual Recurrent Neural Network (RRNet) for synthetically extracting spectral information, and estimating stellar atmospheric parameters together with 15 chemical element abundances for medium-resolution spectra from Large Sky Area Multi-Object Fiber Spectroscopic Telescope (LAMOST). The RRNet consists of two fundamental modules: a residual module and a recurrent module. The residual module extracts spectral features based on the longitudinally driving power from parameters, while the recurrent module recovers spectral information and restrains the negative influences from noises based on Cross-band Belief Enhancement. RRNet is trained by the spectra from common stars between LAMOST DR7 and APOGEE-Payne catalog. The 17 stellar parameters and their uncertainties for 2.37 million medium-resolution spectra from LAMOST DR7 are predicted. For spectra with S/N >= 10, the precision of estimations Teff and log g are 88 K and 0.13 dex respectively, elements C, Mg, Al, Si, Ca, Fe, Ni are 0.05 dex to 0.08 dex, and N, O, S, K, Ti, Cr, Mn are 0.09 dex to 0.14 dex, while that of Cu is 0.19 dex. Compared with StarNet and SPCANet, RRNet shows higher accuracy and robustness. In comparison to Apache Point Observatory Galactic Evolution Experiment and Galactic Archaeology with HERMES surveys, RRNet manifests good consistency within a reasonable range of bias. Finally, this work releases a catalog for 2.37 million medium-resolution spectra from the LAMOST DR7, the source code, the trained model and the experimental data respectively for astronomical science exploration and data processing algorithm research reference.

LLM agents are beginning to invoke industrial asset-management tools through the Model Context Protocol (MCP), yet whether they can act reliably on this substrate for safety-critical Prognostics and Health Management (PHM) is unanswered. Prior benchmarks conflate protocol fluency with reasoning, instrumentation failures with agent failures, and tool use with tool retrieval. We introduce PHMForge, an evaluation environment that closes each conflation. PHMForge ships 99 SME-authored scenarios across eight industrial asset classes spanning rotating equipment, aero-engines, and lithium-ion cells, on public datasets including NASA PCoE, served through 39 MCP-native tools wrapping published PHM algorithms (C-MAPSS, ISO~10816, Arrhenius capacity-fade models, time-series foundation models). Krippendorff's αin [0.74,,0.82] on a 30-scenario stratified rotating-equipment/aero-engine sample; the battery extension is single-rater. Across three agentic frameworks and six LLM backbones, the strongest configuration reaches 80.8\% pass@1, with the residual gap concentrated in orchestration and tool-sequencing errors. Crucially, an architectural ablation shows that replacing MCP execution with text-based Retrieval-Augmented Generation (RAG) over telemetry-equivalent evidence collapses Remaining Useful Life pass-all-3 from 100\% to 20\% (5/5 vs.\ 1/5) on the battery class, exposing the structural limits of static retrieval for prognostic computation. Trajectory decomposition shows orchestration errors dominate failures across backbones, while schema-invalid tool calls concentrate in smaller open-weight models. Frontier LLMs are stronger at calling tools than at planning when to call them. PHMForge is open-sourced with deterministic evaluators, a public leaderboard, and a datasheet.

Vision-Language-Action (VLA) models have recently achieved remarkable progress in robotic manipulation, yet they remain limited in failure diagnosis and learning from failures. Additionally, existing failure datasets are mostly generated programmatically in simulation, which limits their generalization to the real world. In light of these, we introduce ViFailback, a framework designed to diagnose robotic manipulation failures and provide both textual and visual correction guidance. Our framework utilizes explicit visual symbols to enhance annotation efficiency. We further release the ViFailback dataset, a large-scale collection of 58,126 Visual Question Answering (VQA) pairs along with their corresponding 5,202 real-world manipulation trajectories. Based on the dataset, we establish ViFailback-Bench, a benchmark of 11 fine-grained VQA tasks designed to assess the failure diagnosis and correction abilities of Vision-Language Models (VLMs), featuring ViFailback-Bench Lite for closed-ended and ViFailback-Bench Hard for open-ended evaluation. To demonstrate the effectiveness of our framework, we built the ViFailback-8B VLM, which not only achieves significant overall performance improvement on ViFailback-Bench but also generates visual symbols for corrective action guidance. Finally, by integrating ViFailback-8B with a VLA model, we conduct real-world robotic experiments demonstrating its ability to assist the VLA model in recovering from failures. Project Website: https://x1nyuzhou.github.io/vifailback.github.io/

Reinforcement learning fine-tuning (RLFT) is a dominant paradigm for improving pretrained policies for downstream tasks. These pretrained policies, trained on large datasets, produce generations with a broad range of promising but unrefined behaviors. Often, a critical failure mode of RLFT arises when policies lose this diversity and collapse into a handful of easily exploitable outputs. This convergence hinders exploration, which is essential for expanding the capabilities of the pretrained policy and for amplifying the benefits of test-time compute scaling. To address this, we introduce an objective for policy gradient methods that explicitly enforces the exploration and refinement of diverse generations, which we call a polychromic objective. We then show how proximal policy optimization (PPO) can be adapted to optimize this objective. Our method (1) employs vine sampling to collect on-policy rollouts and (2) modifies the advantage function to reflect the advantage under our new objective. Experiments on BabyAI, Minigrid, and Algorithmic Creativity show that our method improves success rates by reliably solving a larger set of environment configurations and generalizes better under large perturbations. Moreover, when given multiple attempts in pass@k experiments, the policy achieves substantially higher coverage, demonstrating its ability to maintain and exploit a diverse repertoire of strategies.

Large language models (LLMs) can call tools effectively, yet they remain brittle in multi-turn execution: following a tool call error, smaller models often degenerate into repetitive invalid re-invocations, failing to interpret error feedback and self-correct. This brittleness hinders reliable real-world deployment, where the execution errors are inherently inevitable during tool interaction procedures. We identify a key limitation of current approaches: standard reinforcement learning (RL) treats errors as sparse negative rewards, providing no guidance on how to recover, while pre-collected synthetic error-correction datasets suffer from distribution mismatch with the model's on-policy error modes. To bridge this gap, we propose Fission-GRPO, a framework that converts execution errors into corrective supervision within the RL training loop. Our core mechanism fissions each failed trajectory into a new training instance by augmenting it with diagnostic feedback from a finetuned Error Simulator, then resampling recovery rollouts on-policy. This enables the model to learn from the precise errors it makes during exploration, rather than from static, pre-collected error cases. On the BFCL v4 Multi-Turn, Fission-GRPO improves the error recovery rate of Qwen3-8B by 5.7% absolute, crucially, yielding a 4% overall accuracy gain (42.75% to 46.75%) over GRPO and outperforming specialized tool-use agents.

Deep residual networks have emerged as a family of extremely deep architectures showing compelling accuracy and nice convergence behaviors. In this paper, we analyze the propagation formulations behind the residual building blocks, which suggest that the forward and backward signals can be directly propagated from one block to any other block, when using identity mappings as the skip connections and after-addition activation. A series of ablation experiments support the importance of these identity mappings. This motivates us to propose a new residual unit, which makes training easier and improves generalization. We report improved results using a 1001-layer ResNet on CIFAR-10 (4.62% error) and CIFAR-100, and a 200-layer ResNet on ImageNet. Code is available at: https://github.com/KaimingHe/resnet-1k-layers

Combined electric power system and High-Altitude Electromagnetic Pulse (HEMP) models are being developed to determine the effect of a HEMP on the US power grid. The work relies primarily on deterministic methods; however, it is computationally untenable to evaluate the E1 HEMP response of large numbers of grid components distributed across a large interconnection. Further, the deterministic assessment of these components' failures are largely unachievable. E1 HEMP laboratory testing of the components is accomplished, but is expensive, leaving few data points to construct failure models of grid components exposed to E1 HEMP. The use of Bayesian priors, developed using the subject matter expertise, combined with the minimal test data in a Bayesian inference process, provides the basis for the development of more robust and cost-effective statistical component failure models. These can be used with minimal computational burden in a simulation environment such as sampling of Cumulative Distribution Functions (CDFs).

Foundation models are often used as fixed black-box predictors for downstream tasks with limited labeled data, but their predictions may be biased and unsafe to trust blindly. We study this setting through black-box assisted nonparametric regression: a learner observes labeled samples and can query a fixed predictor f_0, while the target f^* is close to f_0 in L_2(P_X) up to an unknown radius δ. We give a finite-sample minimax characterization showing a phase transition at δ_c(n) asymp n^{-β/(2β+d)}, with leading risk min{δ^2, n^{-2β/(2β+d)}}. We then analyze a Safe Residual Estimator: it learns a correction around f_0, initializes the residual head at zero so the initial predictor equals f_0, and uses holdout selection to revert to f_0 when the learned correction is not supported by validation data. Here, "safe" means avoiding negative transfer, i.e., performing worse than the black-box predictor alone. The estimator matches the leading minimax term up to an additive validation-selection cost. Synthetic regression experiments verify the predicted phase transition, while CIFAR-100 with CLIP and AG News with Qwen3-8B provide practice-facing evidence that the same residual-correction tradeoff is useful beyond the formal squared-loss regression setting.

Route recommendation systems commonly adopt a multi-stage pipeline involving fine-ranking and re-ranking to produce high-quality ordered recommendations. However, this paradigm faces three critical limitations. First, there is a misalignment between offline training objectives and online metrics. Offline gains do not necessarily translate to online improvements. Actual performance must be validated through A/B testing, which may potentially compromise the user experience. Second, redundancy elimination relies on rigid, handcrafted rules that lack adaptability to the high variance in user intent and the unstructured complexity of real-world scenarios. Third, the strict separation between fine-ranking and re-ranking stages leads to sub-optimal performance. Since each module is optimized in isolation, the fine-ranking stage remains oblivious to the list-level objectives (e.g., diversity) targeted by the re-ranker, thereby preventing the system from achieving a jointly optimized global optimum. To overcome these intertwined challenges, we propose SCASRec (Self-Correcting and Auto-Stopping Recommendation), a unified generative framework that integrates ranking and redundancy elimination into a single end-to-end process. SCASRec introduces a stepwise corrective reward (SCR) to guide list-wise refinement by focusing on hard samples, and employs a learnable End-of-Recommendation (EOR) token to terminate generation adaptively when no further improvement is expected. Experiments on two large-scale, open-sourced route recommendation datasets demonstrate that SCASRec establishes an SOTA in offline and online settings. SCASRec has been fully deployed in a real-world navigation app, demonstrating its effectiveness.