Daily Papers

We study how initial model selection, later handoff, and training targets affect success and cost in LLM tasks that span multiple turns. We compare several router architectures using handoff curves, which record task success and cost as the handoff step changes. Our dataset contains 34,204 complete executions of three Qwen models across BFCL, MultiWOZ, and τ-retail, providing offline supervision for routing decisions. In our primary comparison, with Qwen3.5 35B-A3B as the starting model, allowing a later handoff does not establish an improvement in utility over initial selection on BFCL or MultiWOZ, and increases cost on BFCL across a range of cost weights. Changing the supervision targets improves router performance on both our dataset and TwinRouterBench. On our dataset, replacing noisy training success curves with monotone fits raises success by 0.2 to 4.1 percentage points at the same cost across the reported operating points. On TwinRouterBench, we construct targets that describe the model capability needed for the remaining work and difficult steps ahead. Compared with training on the benchmark's per-step labels, these targets raise trajectory pass scores by 7.8 percentage points and cost savings by 6.3 percentage points on the full static bank. A live deployment of the router trained with these targets resolves 79 of 100 instances at a router cost of 0.59 US dollars per instance.

Mixture-of-experts (MoE) architectures have expanded from language modeling to automatic speech recognition (ASR). Traditional MoE methods, such as the Switch Transformer, route experts independently within each layer. Our analysis reveals that routers in most layers make expert choices that are not strongly correlated with the choices of the routers in other layers. To increase the cooperation between experts in different layers and encourage greater specialization, we use a shared router across different MoE layers. We call this model Omni-router Transformer. Extensive experiments on a large-scale pseudo-labeled dataset and evaluations across 10 diverse, out-of-domain ASR benchmarks demonstrate that the Omni-router Transformer is able to achieve lower training loss and consistently outperform dense and Switch Transformer models, reducing average word error rates by 11.2% and 8.2%, respectively, while providing structured expert usage and improved robustness to diverse data.

Large language models (LLMs) with mixture-of-experts (MoE) architectures achieve remarkable scalability by sparsely activating a subset of experts per token, yet their frequent expert switching creates memory bandwidth bottlenecks that compute-in-memory (CIM) architectures are well-suited to mitigate. However, analog CIM systems suffer from inherent hardware imperfections that perturb stored weights, and its negative impact on MoE-based LLMs in noisy CIM environments remains unexplored. In this work, we present the first systematic investigation of MoE-based LLMs under noise model calibrated with real chip measurements, revealing that hardware noise critically disrupts expert load balance and renders clean-trained routing decisions consistently suboptimal. Based on these findings, we propose ROMER, a post-training calibration framework that (1) replaces underactivated experts with high-frequency ones to restore load balance, and (2) recalibrates router logits via percentile-based normalization to stabilize routing under noise. Extensive experiments across multiple benchmarks demonstrate that ROMER achieves up to 58.6\%, 58.8\%, and 59.8\% reduction in perplexity under real-chip noise conditions for DeepSeek-MoE, Qwen-MoE, and OLMoE, respectively, establishing its effectiveness and generalizability across diverse MoE architectures.

Mixture-of-Experts (MoE) language models produce routing information during inference that may be logged or exposed for monitoring, debugging, load analysis, and safety auditing. Unlike ordinary model outputs, this telemetry reveals a view of the model's internal computation, raising a privacy question: can it reveal whether an example was used to fine-tune the deployed model? We introduce a router-augmented membership inference attack that combines conventional output-side signals with aggregated routing features and applies a membership classifier learned from independently fine-tuned shadow models to the target model. Across three MoE architectures and three data domains, router telemetry consistently improves membership inference over a strong output-signal ensemble, increasing TPR at 1\% FPR by 2.7--9.4 percentage points across all nine settings. The leakage persists across full fine-tuning, frozen-router training, LoRA, and instruction tuning, and remains observable with only discrete expert selections, restricted telemetry, or a single shadow model. Mechanistic analysis further shows that the leakage does not require router-specific memorization: fine-tuning introduces membership information into hidden representations, while the router exposes a projection of this signal even when its parameters are frozen. Perturbing the telemetry reduces this additional leakage only as its fidelity degrades. Our results show that router telemetry can turn an operational signal into an additional privacy surface for fine-tuned MoE models.

Mixture-of-Experts (MoE) architectures face challenges such as high memory consumption and redundancy in experts. Pruning MoE can reduce network weights while maintaining model performance. Motivated by the recent observation of emergent large magnitude features in Large Language Models (LLM) and MoE routing policy, we propose MoE-Pruner, a method that prunes weights with the smallest magnitudes multiplied by the corresponding input activations and router weights, on each output neuron. Our pruning method is one-shot, requiring no retraining or weight updates. We evaluate our method on Mixtral-8x7B and Mixtral-8x22B across multiple language benchmarks. Experimental results show that our pruning method significantly outperforms state-of-the-art LLM pruning methods. Furthermore, our pruned MoE models can benefit from a pretrained teacher model through expert-wise knowledge distillation, improving performance post-pruning. Experimental results demonstrate that the Mixtral-8x7B model with 50% sparsity maintains 99% of the performance of the original model after the expert-wise knowledge distillation.

The proliferation of large language models (LLMs) has led to the adoption of Mixture-of-Experts (MoE) architectures that dynamically leverage specialized subnetworks for improved efficiency and performance. Despite their benefits, MoE models face significant challenges during inference, including inefficient memory management and suboptimal batching, due to misaligned design choices between the model architecture and the system policies. Furthermore, the conventional approach of training MoEs from scratch is increasingly prohibitive in terms of cost. In this paper, we propose a novel framework Read-ME that transforms pre-trained dense LLMs into smaller MoE models (in contrast to "upcycling" generalist MoEs), avoiding the high costs of ground-up training. Our approach employs activation sparsity to extract experts. To compose experts, we examine the widely-adopted layer-wise router design and show its redundancy, and thus we introduce the pre-gating router decoupled from the MoE backbone that facilitates system-friendly pre-computing and lookahead scheduling, enhancing expert-aware batching and caching. Our codesign therefore addresses critical gaps on both the algorithmic and system fronts, establishing a scalable and efficient alternative for LLM inference in resource-constrained settings. Read-ME outperforms other popular open-source dense models of similar scales, achieving improvements of up to 10.1% on MMLU, and improving mean end-to-end latency up to 6.1%. Codes are available at: https://github.com/VITA-Group/READ-ME.

LLM-guided evolutionary methods such as AlphaEvolve have proven effective in domains like math, systems research, and algorithmic discovery, but their reliance on frontier models makes each run expensive. We argue this is largely an artifact of how existing frameworks allocate search: archives that fail to preserve solution diversity force compensation through stronger mutation models; blind model use spends frontier dollars on local edits a smaller model could handle; and full-set evaluation wastes rollouts on redundant examples. We introduce LEVI, a harness-first evolutionary framework built on the bet that stronger search architectures can substitute for or even outperform larger LLMs in evolutionary search. LEVI improves on three core components of evolutionary search: a solution database that establishes diversity from the beginning, and then maintains it throughout the run; a smarter mutation router that plays into the strengths of large and small LLMs; and a rank-preserving proxy benchmark for rollout-heavy settings. Across systems-research benchmarks LEVI attains the highest score on a budget 3.3-6.7x smaller than the published frontier-model runs of existing frameworks like ShinkaEvolve, GEPA, and AdaEvolve; on one problem, LEVI matches the existing best at a 35x lower cost. On prompt optimization, LEVI matches or exceeds GEPA at less than half of its rollout budget on four different benchmarks. LEVI is available as an open-source framework at https://github.com/ttanv/levi.

The scaling of large language models (LLMs) has revolutionized their capabilities in various tasks, yet this growth must be matched with efficient computational strategies. The Mixture-of-Experts (MoE) architecture stands out for its ability to scale model size without significantly increasing training costs. Despite their advantages, current MoE models often display parameter inefficiency. For instance, a pre-trained MoE-based LLM with 52 billion parameters might perform comparably to a standard model with 6.7 billion parameters. Being a crucial part of MoE, current routers in different layers independently assign tokens without leveraging historical routing information, potentially leading to suboptimal token-expert combinations and the parameter inefficiency problem. To alleviate this issue, we introduce the Layerwise Recurrent Router for Mixture-of-Experts (RMoE). RMoE leverages a Gated Recurrent Unit (GRU) to establish dependencies between routing decisions across consecutive layers. Such layerwise recurrence can be efficiently parallelly computed for input tokens and introduces negotiable costs. Our extensive empirical evaluations demonstrate that RMoE-based language models consistently outperform a spectrum of baseline models. Furthermore, RMoE integrates a novel computation stage orthogonal to existing methods, allowing seamless compatibility with other MoE architectures. Our analyses attribute RMoE's gains to its effective cross-layer information sharing, which also improves expert selection and diversity. Our code is at https://github.com/qiuzh20/RMoE

Machine unlearning (MU) for large language models has become critical for AI safety, yet existing methods fail to generalize to Mixture-of-Experts (MoE) architectures. We identify that traditional unlearning methods exploit MoE's architectural vulnerability: they manipulate routers to redirect queries away from knowledgeable experts rather than erasing knowledge, causing a loss of model utility and superficial forgetting. We propose Geometric Routing Invariance Preservation (GRIP), an algorithm-agnostic framework for unlearning for MoE. Our core contribution is a geometric constraint, implemented by projecting router gradient updates into an expert-specific null-space. Crucially, this decouples routing stability from parameter rigidity: while discrete expert selections remain stable for retained knowledge, the continuous router parameters remain plastic within the null space, allowing the model to undergo necessary internal reconfiguration to satisfy unlearning objectives. This forces the unlearning optimization to erase knowledge directly from expert parameters rather than exploiting the superficial router manipulation shortcut. GRIP functions as an adapter, constraining router parameter updates without modifying the underlying unlearning algorithm. Extensive experiments on large-scale MoE models demonstrate that our adapter eliminates expert selection shift (achieving over 95% routing stability) across all tested unlearning methods while preserving their utility. By preventing existing algorithms from exploiting MoE model's router vulnerability, GRIP adapts existing unlearning research from dense architectures to MoEs.

Context faithfulness is essential for reliable reasoning in context-dependent scenarios. However, large language models often struggle to ground their outputs in the provided context, resulting in irrelevant responses. Inspired by the emergent expert specialization observed in mixture-of-experts architectures, this work investigates whether certain experts exhibit specialization in context utilization, offering a potential pathway toward targeted optimization for improved context faithfulness. To explore this, we propose Router Lens, a method that accurately identifies context-faithful experts. Our analysis reveals that these experts progressively amplify attention to relevant contextual information, thereby enhancing context grounding. Building on this insight, we introduce Context-faithful Expert Fine-Tuning (CEFT), a lightweight optimization approach that selectively fine-tunes context-faithful experts. Experiments across a wide range of benchmarks and models demonstrate that CEFT matches or surpasses the performance of full fine-tuning while being significantly more efficient.

Machine unlearning is increasingly important for large language models, yet unlearning in Mixture-of-Experts (MoE) architectures remains underexplored. Unlike dense models, MoE architectures employ a router at each layer to assign each token to a sparse subset of experts. In this work, we observe that forget data often activates a small subset of experts disproportionately, while these experts may receive much weaker activation from retain data. This forget--retain routing mismatch can leave forget-critical experts under-regularized during unlearning. To address this, we propose TRACE, Targeted Routing-Aware Calibration of Experts, for MoE unlearning. TRACE first detects forget-critical experts from offline activation statistics, and then calibrates retain regularization by reweighting token-level retain losses so that each selected expert's retain-side activation frequency better matches its forget-side counterpart. Experiments on WMDP and MUSE-BOOKS across multiple MoE LLMs show that TRACE consistently improves the forget-utility trade-off, yielding a 9\% relative utility improvement over the strongest baseline under comparable forgetting quality and the best performance on three out of four MUSE-BOOKS metrics.

Despite MoE models leading many benchmarks, supervised fine-tuning (SFT) for the MoE architectures remains difficult because its router layers are fragile. Methods such as DenseMixer and ESFT mitigate router collapse with dense mixing or auxiliary load-balancing losses, but these introduce noisy gradients that often degrade performance. In preliminary experiments, we systematically pruned experts and observed that while certain super experts are activated far more frequently, discarding less used experts still leads to notable performance degradation. This suggests that even rarely activated experts encode non-trivial knowledge useful for downstream tasks. Motivated by this, we propose an auxiliary-loss-free MoE SFT framework that combines bias-driven sparsification with always-active gated condenser experts. Rather than enforcing balanced activation across all experts, our method encourages task-relevant experts to remain active while pushing long-tailed experts toward inactivity. The condenser experts provide a persistent, learnable pathway that alleviates gradient starvation and facilitates consolidation of information that would otherwise remain fragmented across sparsely activated experts. Analysis further suggest that this design better preserves long-tailed expert information under sparse routing. Experiments on large-scale MoE models demonstrate that our approach outperforms state-of-the-art SFT baselines such as DenseMixer and ESFT, achieving average gain of 2.5%+ on both mathematical reasoning and commonsenseQA benchmarks.

No single large language model (LLM) is optimal across all queries and budget constraints, making model routing essential for cost-effective deployment. Existing routers adopt diverse formulations and implementations, making fair comparison and extension difficult. We present a unified formulation of LLM routing as a sequential decision process characterized by five components: context encoders, model encoders, scoring functions, decision rules, and learning signals, covering single-turn, multi-turn, and personalized routing. Based on this formulation, we develop an automated pipeline for constructing routing supervision and evaluating routers jointly on response quality and inference cost. The resulting benchmark, xRouteBench, spans generic LLM, memory-augmented, vision, time-series, and personalized routing tasks. We further introduce LLMRouter, an open-source modular infrastructure with more than 16 representative routers. Our empirical study shows that learned routers outperform the strongest fixed-model baseline by 14.6% relatively, lightweight routers become more competitive under tight cost constraints, and user-conditioned routing consistently improves personalization.

Multi-model routing has evolved from an engineering technique into essential infrastructure, yet existing work lacks a systematic, reproducible benchmark for evaluating vision-language models (VLMs). We present VL-RouterBench to assess the overall capability of VLM routing systems systematically. The benchmark is grounded in raw inference and scoring logs from VLMs and constructs quality and cost matrices over sample-model pairs. In scale, VL-RouterBench covers 14 datasets across 3 task groups, totaling 30,540 samples, and includes 15 open-source models and 2 API models, yielding 519,180 sample-model pairs and a total input-output token volume of 34,494,977. The evaluation protocol jointly measures average accuracy, average cost, and throughput, and builds a ranking score from the harmonic mean of normalized cost and accuracy to enable comparison across router configurations and cost budgets. On this benchmark, we evaluate 10 routing methods and baselines and observe a significant routability gain, while the best current routers still show a clear gap to the ideal Oracle, indicating considerable room for improvement in router architecture through finer visual cues and modeling of textual structure. We will open-source the complete data construction and evaluation toolchain to promote comparability, reproducibility, and practical deployment in multimodal routing research.

Mixture-of-experts based acoustic models with dynamic routing mechanisms have proved promising results for speech recognition. The design principle of router architecture is important for the large model capacity and high computational efficiency. Our previous work SpeechMoE only uses local grapheme embedding to help routers to make route decisions. To further improve speech recognition performance against varying domains and accents, we propose a new router architecture which integrates additional global domain and accent embedding into router input to promote adaptability. Experimental results show that the proposed SpeechMoE2 can achieve lower character error rate (CER) with comparable parameters than SpeechMoE on both multi-domain and multi-accent task. Primarily, the proposed method provides up to 1.6% - 4.8% relative CER improvement for the multidomain task and 1.9% - 17.7% relative CER improvement for the multi-accent task respectively. Besides, increasing the number of experts also achieves consistent performance improvement and keeps the computational cost constant.

Real-world users typically have access to multiple Large Language Models (LLMs) from different providers, and these LLMs often excel at distinct domains, yet none dominate all. Consequently, routing each task to the most suitable model becomes critical for both performance and cost. Existing routers treat this as a static, one-off classification problem. However, we identify the performance bottleneck for these routers as information deficit: simply augmenting a vanilla LLM router with performance statistics at the task-dimension level yields a 15.3% relative gain, surpassing a heuristic router built on the same dimension-level priors. Motivated by this finding, we propose Agent-as-a-Router, a framework that formalizes routing as a C-A-F loop (Context->Action->Feedback->Context). It closes the information gap by accumulating execution-grounded experience during deployment. We instantiate this framework as ACRouter, composed of an Orchestrator, a Verifier, a Memory module, and introduce CodeRouterBench, an evaluation environment comprising ~10K task instances with verified scores from 8 frontier LLMs, enabling regret-based router comparison on streaming tasks. Experiments show that ACRouter achieves the lowest cumulative regret on in-distribution tasks and generalizes to out-of-distribution agentic-programming tasks, demonstrating that our routing framework actively closes the information gap. Codes and benchmarks are released at https://github.com/LanceZPF/agent-as-a-router.

Recently, Mixture of Experts (MoE) based Transformer has shown promising results in many domains. This is largely due to the following advantages of this architecture: firstly, MoE based Transformer can increase model capacity without computational cost increasing both at training and inference time. Besides, MoE based Transformer is a dynamic network which can adapt to the varying complexity of input instances in realworld applications. In this work, we explore the MoE based model for speech recognition, named SpeechMoE. To further control the sparsity of router activation and improve the diversity of gate values, we propose a sparsity L1 loss and a mean importance loss respectively. In addition, a new router architecture is used in SpeechMoE which can simultaneously utilize the information from a shared embedding network and the hierarchical representation of different MoE layers. Experimental results show that SpeechMoE can achieve lower character error rate (CER) with comparable computation cost than traditional static networks, providing 7.0%-23.0% relative CER improvements on four evaluation datasets.

Today's LLM ecosystem comprises a wide spectrum of models that differ in size, capability, and cost. No single model is optimal for all scenarios; hence, LLM routers have become essential for selecting the most appropriate model under varying circumstances. However, the rapid emergence of various routers makes choosing the right one increasingly challenging. To address this problem, we need a comprehensive router comparison and a standardized leaderboard, similar to those available for models. In this work, we introduce RouterArena, the first open platform enabling comprehensive comparison of LLM routers. RouterArena has (1) a principally constructed dataset with broad knowledge domain coverage, (2) distinguishable difficulty levels for each domain, (3) an extensive list of evaluation metrics, and (4) an automated framework for leaderboard updates. Leveraging our framework, we have produced the initial leaderboard with detailed metrics comparison as shown in Figure 1. We will make our platform open to the public soon.

Over the past year, the vLLM Semantic Router project has released a series of work spanning: (1) core routing mechanisms -- signal-driven routing, context-length pool routing, router performance engineering, policy conflict detection, low-latency embedding models, category-aware semantic caching, user-feedback-driven routing adaptation, hallucination detection, and hierarchical content-safety classification for privacy and jailbreak protection; (2) fleet optimization -- fleet provisioning and energy-efficiency analysis; (3) agentic and multimodal routing -- multimodal agent routing, tool selection, CUA security, and multi-turn context memory and safety; (4) governance and standards -- inference routing protocols and multi-provider API extensions. Each paper tackled a specific problem in LLM inference, but the problems are not independent; for example, fleet provisioning depends on the routing policy, which depends on the workload mix, shifting as organizations adopt agentic and multimodal workloads. This paper distills those results into the Workload-Router-Pool (WRP) architecture, a three-dimensional framework for LLM inference optimization. Workload characterizes what the fleet serves (chat vs. agent, single-turn vs. multi-turn, warm vs. cold, prefill-heavy vs. decode-heavy). Router determines how each request is dispatched (static semantic rules, online bandit adaptation, RL-based model selection, quality-aware cascading). Pool defines where inference runs (homogeneous vs. heterogeneous GPU, disaggregated prefill/decode, KV-cache topology). We map our prior work onto a 3x3 WRP interaction matrix, identify which cells we have covered and which remain open, and propose twenty-one concrete research directions at the intersections, each grounded in our prior measurements, tiered by maturity from engineering-ready to open research.

Large language models (LLMs) have achieved success, but cost and privacy constraints necessitate deploying smaller models locally while offloading complex queries to cloud-based models. Existing router evaluations are unsystematic, overlooking scenario-specific requirements and out-of-distribution robustness. We propose RouterXBench, a principled evaluation framework with three dimensions: router ability, scenario alignment, and cross-domain robustness. Unlike prior work that relies on output probabilities or external embeddings, we utilize internal hidden states that capture model uncertainty before answer generation. We introduce ProbeDirichlet, a lightweight router that aggregates cross-layer hidden states via learnable Dirichlet distributions with probabilistic training. Trained on multi-domain data, it generalizes robustly across in-domain and out-of-distribution scenarios. Our results show ProbeDirichlet achieves 16.68% and 18.86% relative improvements over the best baselines in router ability and high-accuracy scenarios, with consistent performance across model families, model scales, heterogeneous tasks, and agentic workflows.

Router is the cornerstone component to the Mixture-of-Experts models. Serving as expert proxies, the rows of the router matrix compute their similarity to the MoE inputs to determine which subset of experts is activated. Ideally, each router row is designed to encode the expert matrix into this representative vector, such that its dot-product with token can better reflect token-expert affinity. However, there exists no design principles to enforce this condensation. In this paper, we propose to align each router row with the principal singular direction of the associated expert, as this direction provides the most expressive mathematical description of a matrix. Based on this principle, we propose a router redesign with Manifold Power Iteration (MPI). Specifically, it introduces a "Power-then-Retract" paradigm, where a power iteration step is performed on the router weights, followed by a retraction to impose a norm constraint to ensure both efficiency and stability. Theoretically, we show that MPI drives router rows to converge toward the principal singular directions of associated experts. Empirically, we pretrain MoE model across scales from 1B to 11B parameters to confirm that this alignment facilitates more effective MoE models.

Yuan 2.0-M32, with a similar base architecture as Yuan-2.0 2B, uses a mixture-of-experts architecture with 32 experts of which 2 experts are active. A new router network, Attention Router, is proposed and adopted for a more efficient selection of experts, which boosts the accuracy of 3.8% compared to the model with classical router network. Yuan 2.0-M32 is trained with 2000B tokens from scratch, and the training computation consumption is only 9.25% of a dense model at the same parameter scale. Yuan 2.0-M32 demonstrates competitive capability on coding, math, and various domains of expertise, with only 3.7B active parameters of 40B in total, and 7.4 GFlops forward computation per token, both of which are only 1/19 of Llama3-70B. Yuan 2.0-M32 surpass Llama3-70B on MATH and ARC-Challenge benchmark, with accuracy of 55.89 and 95.8 respectively. The models and source codes of Yuan 2.0-M32 are released at Github.

This paper aims to provide a proof of concept of the accuracy of simulations for advanced networking study. The particular target technology is the Differentiated Services (DiffServ) architecture. The method has been to apply experimental activities conducted in a real network to a simulation environment, to gather the same performance parameters and to compare results. A worthy re-engineering of the DiffServ module of the deployed software program has been carried out and significant contribution have been made to overcome the encountered limitations and to enrich its modeling capabilities. Final results give useful suggestions for a more critical approach to simulations targeted for advanced networking study.

With the rapid proliferation of large language models (LLMs) -- each optimized for different strengths, style, or latency/cost profile -- routing has become an essential technique to operationalize the use of different models. However, existing LLM routing approaches are limited in two key ways: they evaluate performance using benchmarks that often fail to capture human preferences driven by subjective evaluation criteria, and they typically select from a limited pool of models. In this work, we propose a preference-aligned routing framework that guides model selection by matching queries to user-defined domains (e.g., travel) or action types (e.g., image editing) -- offering a practical mechanism to encode preferences in routing decisions. Specifically, we introduce Arch-Router, a compact 1.5B model that learns to map queries to domain-action preferences for model routing decisions. Our approach also supports seamlessly adding new models for routing without requiring retraining or architectural modifications. Experiments on conversational datasets demonstrate that our approach achieves state-of-the-art (SOTA) results in matching queries with human preferences, outperforming top proprietary models. Our approach captures subjective evaluation criteria and makes routing decisions more transparent and flexible. Our model is available at: https://huggingface.co/katanemo/Arch-Router-1.5B.

As LLMs proliferate with diverse capabilities and costs, LLM routing has emerged by learning to predict each LLM's quality and cost for a given query, then selecting the one with high quality and low cost. However, existing routers implicitly assume a single fixed quality and cost per LLM for each query, ignoring that the same LLM's quality varies with its output length. This causes routers to exclude powerful LLMs when their estimated cost exceeds the budget, missing the opportunity that these LLMs could still deliver high quality at reduced cost with shorter outputs. To address this, we introduce R2-Router, which treats output length budget as a controllable variable and jointly selects the best LLM and length budget, enforcing the budget via length-constrained instructions. This enables R2-Router to discover that a powerful LLM with constrained output can outperform a weaker LLM at comparable cost-efficient configurations invisible to prior methods. Together with the router framework, we construct R2-Bench, the first routing dataset capturing LLM behavior across diverse output length budgets. Experiments show that R2-Router achieves state-of-the-art performance at 4-5x lower cost compared with existing routers. This work opens a new direction: routing as reasoning, where routers evolve from reactive selectors to deliberate reasoners that explore which LLM to use and at what cost budget.

As the range of applications for Large Language Models (LLMs) continues to grow, the demand for effective serving solutions becomes increasingly critical. Despite the versatility of LLMs, no single model can optimally address all tasks and applications, particularly when balancing performance with cost. This limitation has led to the development of LLM routing systems, which combine the strengths of various models to overcome the constraints of individual LLMs. Yet, the absence of a standardized benchmark for evaluating the performance of LLM routers hinders progress in this area. To bridge this gap, we present RouterBench, a novel evaluation framework designed to systematically assess the efficacy of LLM routing systems, along with a comprehensive dataset comprising over 405k inference outcomes from representative LLMs to support the development of routing strategies. We further propose a theoretical framework for LLM routing, and deliver a comparative analysis of various routing approaches through RouterBench, highlighting their potentials and limitations within our evaluation framework. This work not only formalizes and advances the development of LLM routing systems but also sets a standard for their assessment, paving the way for more accessible and economically viable LLM deployments. The code and data are available at https://github.com/withmartian/routerbench.

Efforts to overcome catastrophic forgetting have primarily centered around developing more effective Continual Learning (CL) methods. In contrast, less attention was devoted to analyzing the role of network architecture design (e.g., network depth, width, and components) in contributing to CL. This paper seeks to bridge this gap between network architecture design and CL, and to present a holistic study on the impact of network architectures on CL. This work considers architecture design at the network scaling level, i.e., width and depth, and also at the network components, i.e., skip connections, global pooling layers, and down-sampling. In both cases, we first derive insights through systematically exploring how architectural designs affect CL. Then, grounded in these insights, we craft a specialized search space for CL and further propose a simple yet effective ArchCraft method to steer a CL-friendly architecture, namely, this method recrafts AlexNet/ResNet into AlexAC/ResAC. Experimental validation across various CL settings and scenarios demonstrates that improved architectures are parameter-efficient, achieving state-of-the-art performance of CL while being 86%, 61%, and 97% more compact in terms of parameters than the naive CL architecture in Task IL and Class IL. Code is available at https://github.com/byyx666/ArchCraft.

As the large language model (LLM) ecosystem expands, individual models exhibit varying capabilities across queries, benchmarks, and domains, motivating the development of LLM routing. While prior work has largely focused on router mechanism design, LLM profiles, which capture model capabilities, remain underexplored. In this work, we ask: How does LLM profile design affect routing performance across different routers? Addressing this question helps clarify the role of profiles in routing, disentangle profile design from router design, and enable fairer comparison and more principled development of routing systems. To this end, we view LLM profiling as a structured information integration problem over heterogeneous interaction histories. We develop a general design space of LLM profiles, named RouteProfile, along four key dimensions: organizational form, representation type, aggregation depth, and learning configuration. Through systematic evaluation across three representative routers under both standard and new-LLM generalization settings, we show that: (1) structured profiles consistently outperform flat ones; (2) query-level signals are more reliable than coarse domain-level signals; and (3) generalization to newly introduced models benefits most from structured profiles under trainable configurations. Overall, our work highlights LLM profile design as an important direction for future routing research.

With the rise of the Agent Web and Model Context Protocol (MCP), the agent ecosystem is evolving into an open collaborative network, exponentially increasing accessible tools. However, current architectures face severe scalability and generality bottlenecks. To address this, we propose ToolACE-MCP, a pipeline for training history-aware routers to empower precise navigation in large-scale ecosystems. By leveraging a dependency-rich candidate Graph to synthesize multi-turn trajectories, we effectively train routers with dynamic context understanding to create the plug-and-play Light Routing Agent. Experiments on the real-world benchmarks MCP-Universe and MCP-Mark demonstrate superior performance. Notably, ToolACE-MCP exhibits critical properties for the future Agent Web: it not only generalizes to multi-agent collaboration with minimal adaptation but also maintains exceptional robustness against noise and scales effectively to massive candidate spaces. These findings provide a strong empirical foundation for universal orchestration in open-ended ecosystems.

Large Language Models (LLMs) process every token through all layers of a transformer stack, causing wasted computation on simple queries and insufficient flexibility for harder ones that need deeper reasoning. Adaptive-depth methods can improve efficiency, but prior approaches rely on costly inference-time search, architectural changes, or large-scale retraining, and in practice often degrade accuracy despite efficiency gains. We introduce Dr.LLM, Dynamic routing of Layers for LLMs, a retrofittable framework that equips pretrained models with lightweight per-layer routers deciding to skip, execute, or repeat a block. Routers are trained with explicit supervision: using Monte Carlo Tree Search (MCTS), we derive high-quality layer configurations that preserve or improve accuracy under a compute budget. Our design, windowed pooling for stable routing, focal loss with class balancing, and bottleneck MLP routers, ensures robustness under class imbalance and long sequences. On ARC (logic) and DART (math), Dr.LLM improves accuracy by up to +3.4%p while saving 5 layers per example on average. Routers generalize to out-of-domain tasks (MMLU, GSM8k, AIME, TruthfulQA, SQuADv2, GPQA, PIQA, AGIEval) with only 0.85% accuracy drop while retaining efficiency, and outperform prior routing methods by up to +7.7%p. Overall, Dr.LLM shows that explicitly supervised routers retrofit frozen LLMs for budget-aware, accuracy-driven inference without altering base weights.

Low-rank adapters (LoRAs) are a parameter-efficient finetuning technique that injects trainable low-rank matrices into pretrained models to adapt them to new tasks. Mixture-of-LoRAs models expand neural networks efficiently by routing each layer input to a small subset of specialized LoRAs of the layer. Existing Mixture-of-LoRAs routers assign a learned routing weight to each LoRA to enable end-to-end training of the router. Despite their empirical promise, we observe that the routing weights are typically extremely imbalanced across LoRAs in practice, where only one or two LoRAs often dominate the routing weights. This essentially limits the number of effective LoRAs and thus severely hinders the expressive power of existing Mixture-of-LoRAs models. In this work, we attribute this weakness to the nature of learnable routing weights and rethink the fundamental design of the router. To address this critical issue, we propose a new router designed that we call Reinforcement Routing for Mixture-of-LoRAs (ReMix). Our key idea is using non-learnable routing weights to ensure all active LoRAs to be equally effective, with no LoRA dominating the routing weights. However, our routers cannot be trained directly via gradient descent due to our non-learnable routing weights. Hence, we further propose an unbiased gradient estimator for the router by employing the reinforce leave-one-out (RLOO) technique, where we regard the supervision loss as the reward and the router as the policy in reinforcement learning. Our gradient estimator also enables to scale up training compute to boost the predictive performance of our ReMix. Extensive experiments demonstrate that our proposed ReMix significantly outperform state-of-the-art parameter-efficient finetuning methods under a comparable number of activated parameters.

Production LLM deployments increasingly maintain heterogeneous model pools spanning order-of-magnitude cost differences. Existing routers make binary strong-vs-weak decisions and couple learned parameters to specific model identities, requiring retraining whenever the catalog changes. We present HyDRA (Hybrid Dynamic Routing Architecture), a framework that predicts fine-grained, multi-dimensional capability requirements per query and matches them against configuration-defined model profiles via shortfall matching. A ModernBERT encoder with K=4 independent sigmoid heads scores each query along reasoning, code generation, debugging, and tool use; a shortfall-matching algorithm then selects the cheapest model whose capabilities meet the predicted requirements. The deployed predictor runs at 86 ms median CPU inference latency in production, and is fully decoupled from the model catalog -- adding or removing models requires only a configuration change, with zero retraining. On SWE-Bench Verified (5-model pool: GPT-5.4-mini, Claude Haiku 4.5, GPT-5.3 Codex, Claude Sonnet 4.6, GPT-5.4), HyDRA's tunable shortfall threshold spans three regimes: peak-quality exceeds the always-strong Claude Sonnet 4.6 baseline (75.4% vs. 74.2% resolution) at 12.9% cost savings; iso-quality matches Sonnet at 54.1% cost savings, a 6x improvement over our prior in-house binary router at 9.1%; aggressive pushes savings to 72.5% for a 3.2-point quality trade. Results generalize across LiveCodeBench, BigCodeBench, and tau-bench. HyDRA is deployed to all users in GitHub Copilot's VS Code Chat auto-mode and -- to our knowledge for the first time in the LLM routing literature -- demonstrates language-invariant routing across CJK, European, and other script families.

Existing routers rely on semantic query features or handcrafted features, which often fail to capture model-specific failures or intrinsic task difficulty. We instead route using internal LLM activations, specifically the residual stream. Our key idea, Encoder-Target Decoupling, separates the model that produces the predictive signal (the Encoder) from the model whose correctness is being estimated (the Target), allowing open-weight encoders to predict the performance of closed-source target models. We evaluate layerwise geometric probes, finding that Fisher Separability (J) effectively identifies informative layers, supported by Effective Dimensionality (d_{eff}) diagnostics. We then utilize a SharedTrunkNet, a joint multi-output MLP that predicts simultaneous correctness probabilities across candidate models using concatenated prefill features. In our experiments, SharedTrunkNet consistently outperforms semantic baselines. At its best, SharedTrunkNet closes 45.58% of the gap between the strongest standalone model and the oracle while achieving 74.31% cost savings relative to the most expensive model. These results demonstrate that prefill activations provide a robust routing signal, establishing activation-based routing as a high-performance alternative to purely semantic selection.

Large language model (LLM) routing assigns each query to the most suitable model from an ensemble. We introduce LLMRouterBench, a large-scale benchmark and unified framework for LLM routing. It comprises over 400K instances from 21 datasets and 33 models. Moreover, it provides comprehensive metrics for both performance-oriented routing and performance-cost trade-off routing, and integrates 10 representative routing baselines. Using LLMRouterBench, we systematically re-evaluate the field. While confirming strong model complementarity-the central premise of LLM routing-we find that many routing methods exhibit similar performance under unified evaluation, and several recent approaches, including commercial routers, fail to reliably outperform a simple baseline. Meanwhile, a substantial gap remains to the Oracle, driven primarily by persistent model-recall failures. We further show that backbone embedding models have limited impact, that larger ensembles exhibit diminishing returns compared to careful model curation, and that the benchmark also enables latency-aware analysis. All code and data are available at https://github.com/ynulihao/LLMRouterBench.

Routing large language models (LLMs) is a new paradigm that uses a router to recommend the best LLM from a pool of candidates for a given input. In this paper, our comprehensive analysis with more than 8,500 LLMs reveals a novel model-level scaling up phenomenon in Routing LLMs, i.e., a capable router can significantly enhance the performance of this paradigm as the number of candidates increases. This improvement can even surpass the performance of the best single model in the pool and many existing strong LLMs, confirming it a highly promising paradigm. However, the lack of comprehensive and open-source benchmarks for Routing LLMs has hindered the development of routers. In this paper, we introduce RouterEval, a benchmark tailored for router research, which includes over 200,000,000 performance records for 12 popular LLM evaluations across various areas such as commonsense reasoning, semantic understanding, etc., based on over 8,500 various LLMs. Using RouterEval, extensive evaluations of existing Routing LLM methods reveal that most still have significant room for improvement. See https://github.com/MilkThink-Lab/RouterEval for all data, code and tutorial.

ModeSwitch-LLM is a lightweight request-boundary controller for improving single-GPU large language model inference efficiency by routing each request to an appropriate fixed inference mode. Instead of relying on one static serving configuration, the system selects among FP16, quantized modes, speculative decoding, and hybrid modes such as GPTQ plus prefix caching and INT8 plus continuous batching using cheap workload-level features. We evaluate ModeSwitch-LLM on Meta-Llama-3.1-8B-Instruct served on a single NVIDIA A100 GPU. On deployment-style synthetic workloads, the online controller achieves a 2.10x mean latency speedup over FP16 and a 0.48x mean energy ratio, corresponding to 51.7% lower energy per token. On automatic benchmarks used as a quality gate, accuracy remains close to FP16 with a mean delta of +0.17 percentage points. We also evaluate lightweight learned routers, but find that they do not clearly outperform the rule-based controller because they add routing overhead and more often select modes that violate quality, energy, or memory constraints. These results show that simple request-aware routing can recover substantial efficiency from existing inference modes without retraining the model or changing its architecture.

The rapid emergence of diverse large language models (LLMs) has spurred the development of LLM routers that assign user queries to the most suitable model. However, existing LLM routers typically perform a single-round, one-to-one mapping (i.e., assigning each query to a single model in isolation), which limits their capability to tackle complex tasks that demand the complementary strengths of multiple LLMs. In this paper, we present Router-R1, a reinforcement learning (RL)-based framework that formulates multi-LLM routing and aggregation as a sequential decision process. Router-R1 instantiates the router itself as a capable LLM, leveraging its reasoning ability to interleave "think" actions (internal deliberation) with "route" actions (dynamic model invocation), and integrates each response into its evolving context. To guide learning, we employ a lightweight rule-based reward comprising format rewards, final outcome rewards, and a novel cost reward for performance and cost trade-off optimization, opening a pathway toward optimizing performance-cost tradeoffs via RL. Router-R1 also conditions only on simple model descriptors such as pricing, latency, and example performance, enabling strong generalization to unseen model selection. Experiments on seven general and multi-hop QA benchmarks show that Router-R1 outperforms over several strong baselines, achieving superior performance while maintaining robust generalization and cost management.Code is available at https://github.com/ulab-uiuc/Router-R1.

LLM routing aims to achieve a favorable quality--cost trade-off by dynamically assigning easy queries to smaller models and harder queries to stronger ones. However, across both unimodal and multimodal settings, we uncover a pervasive yet underexplored failure mode in existing routers: as the user's cost budget increases, routers systematically default to the most capable and most expensive model even when cheaper models already suffice. As a result, current routers under-utilize small models, wasting computation and monetary cost and undermining the core promise of routing; we term this phenomenon routing collapse. We attribute routing collapse to an objective--decision mismatch: many routers are trained to predict scalar performance scores, whereas routing decisions ultimately depend on discrete comparisons among candidate models. Consequently, small prediction errors can flip relative orderings and trigger suboptimal selections. To bridge this gap, we propose EquiRouter, a decision-aware router that directly learns model rankings, restoring the role of smaller models and mitigating routing collapse. On RouterBench, EquiRouter reduces cost by about 17\% at GPT-4-level performance compared to the strongest prior router. Our code is available at https://github.com/AIGNLAI/EquiRouter.

Routing to select large language models (LLMs) with different cost-quality trade-offs has become a fundamental deployment feature of enterprise AI. Existing routers, primarily make independent routing decisions for each LLM call. However, agentic applications execute as long-horizon workflows whose quality is determined only by a delayed, task-level outcome. This mismatch prevents per-call routers from correctly attributing feedback to individual routing decisions. Towards mitigating this, we present TRACE-Router, a task-level routing framework that aligns routing with the unit of supervision. TRACE-Router assigns each task to a model once at admission using a contextual bandit, pins all subsequent LLM calls to the selected backend, and updates its policy using the task's terminal reward, jointly accounting for accuracy and latency. By leveraging delayed task feedback, TRACE-Router learns routing policies that adapt to the workload while avoiding explicit task-complexity estimation. Across three agentic benchmarks, TRACE-Router consistently improves the accuracy-latency trade-off, achieving non-dominated Pareto frontier points. On tau2-Bench, it outperforms latency-matched interpolation between individual models by 7-8 accuracy points, while on Terminal-Bench it achieves 7.1 higher accuracy points than the strongest single model baseline with 36% lower latency.

The proliferation of Large Language Models (LLMs) with varying capabilities and costs has created a need for efficient model selection in AI systems. LLM routers address this need by dynamically choosing the most suitable model for a given query based on task requirements and budget constraints. However, existing routers face challenges in scalability and real-time adaptation, particularly in high-volume online environments. We present Eagle, a novel LLM routing approach that combines global and local ELO ranking modules to overcome these limitations. By evaluating both general and specialized LLM abilities, Eagle provides a scalable, training-free solution that enhances model selection quality while reducing computational overhead. Our experiments across multiple datasets show Eagle consistently outperforms baseline methods, with improvements of up to 23.52 percent in Area Under Curve (AUC) scores. Moreover, Eagle demonstrates remarkable efficiency, requiring only 1/20 of baseline methods' time for initialization and 100 to 200 times faster incremental updates in online scenarios, making it well-suited for dynamic, high-volume online serving environments.

Modern LLM deployments confront a widening cost-performance spectrum: premium models deliver strong reasoning but are expensive, while lightweight models are economical yet brittle on complex tasks. Static escalation rules and keyword heuristics under-utilize this spectrum and fail to adapt across task types. We present xRouter, a tool-calling-based routing system in which a learned router can either answer directly or invoke one or more external models. The router is trained end-to-end with reinforcement learning using an explicit, cost-aware reward that encodes cost-performance trade-offs, eliminating the need for hand-engineered routing rules. Our implementation encompasses the full reinforcement learning framework, including reward and cost accounting, as well as the deployment and evaluation pipelines. Across diverse benchmarks, xRouter achieves strong cost-performance trade-offs (e.g., substantial cost reductions at comparable task completion rates), and provides empirical insights into what reliably helps learned routing and what does not, ranging from model trainability to the difficulty of eliciting sophisticated orchestration behaviors in small open models. We hope these findings and our open implementation will serve as a practical substrate for advancing learned, cost-aware LLM orchestration.

Mixture-of-Experts (MoE) models challenge serving infrastructures with dynamic, sparse expert utilization, causing instability on conventional systems designed for dense architectures. We propose EaaS, a novel serving system to enable efficient, scalable, and robust MoE deployment. Our system disaggregates MoE modules into independent, stateless services. This design enables fine-grained resource scaling and provides inherent fault tolerance by decoupling compute units. The architecture is powered by a high-performance, CPU-free peer-to-peer communication library that ensures minimal overhead and high throughput. Experiments confirm EaaS's scalability and efficiency, achieving performance comparable to monolithic systems while providing robust fault tolerance and strong scalability. EaaS incurs less than a 2% throughput reduction under simulated hardware failures that would otherwise halt monolithic architectures. It further saves up to 37.5% of computing resources through dynamic fine-grained adaptation to serving traffic, demonstrating strong resilience for large-scale MoE deployment in production.

As large-scale multi-agent systems evolve, the communication protocol layer has become a critical yet under-evaluated factor shaping performance and reliability. Despite the existence of diverse protocols (A2A, ACP, ANP, Agora, etc.), selection is often intuition-driven and lacks standardized guidance. We introduce ProtocolBench, a benchmark that systematically compares agent protocols along four measurable axes: task success, end-to-end latency, message or byte overhead, and robustness under failures. On ProtocolBench, protocol choice significantly influences system behavior. In the Streaming Queue scenario, overall completion time varies by up to 36.5% across protocols, and mean end-to-end latency differs by 3.48 s. Under Fail-Storm Recovery, resilience also differs consistently across protocols. Beyond evaluation, we present ProtocolRouter, a learnable protocol router that selects per-scenario (or per-module) protocols from requirement and runtime signals. ProtocolRouter reduces Fail-Storm recovery time by up to 18.1% versus the best single-protocol baseline, and achieves scenario-specific gains such as higher success in GAIA. We also release ProtocolRouterBench to standardize protocol evaluation and improve reliability at scale.

In this work, we present a new network design paradigm. Our goal is to help advance the understanding of network design and discover design principles that generalize across settings. Instead of focusing on designing individual network instances, we design network design spaces that parametrize populations of networks. The overall process is analogous to classic manual design of networks, but elevated to the design space level. Using our methodology we explore the structure aspect of network design and arrive at a low-dimensional design space consisting of simple, regular networks that we call RegNet. The core insight of the RegNet parametrization is surprisingly simple: widths and depths of good networks can be explained by a quantized linear function. We analyze the RegNet design space and arrive at interesting findings that do not match the current practice of network design. The RegNet design space provides simple and fast networks that work well across a wide range of flop regimes. Under comparable training settings and flops, the RegNet models outperform the popular EfficientNet models while being up to 5x faster on GPUs.

LLMs now tackle a wide range of software-related tasks, yet we show that their performance varies markedly both across and within these tasks. Routing user queries to the appropriate LLMs can therefore help improve response quality while reducing cost. Prior work, however, has focused mainly on general-purpose LLM routing via black-box models. We introduce Routesplain, the first LLM router for software-related tasks, including multilingual code generation and repair, input/output prediction, and computer science QA. Unlike existing routing approaches, Routesplain first extracts human-interpretable concepts from each query (e.g., task, domain, reasoning complexity) and only routes based on these concepts, thereby providing intelligible, faithful rationales. We evaluate Routesplain on 16 state-of-the-art LLMs across eight software-related tasks; Routesplain outperforms individual models both in terms of accuracy and cost, and equals or surpasses all black-box baselines, with concept-level intervention highlighting avenues for further router improvements.

The availability of performant pre-trained models has led to a proliferation of fine-tuned expert models that are specialized to particular domains. This has enabled the creation of powerful and adaptive routing-based "Model MoErging" methods with the goal of using expert modules to create an aggregate system with improved performance or generalization. However, existing MoErging methods often prioritize generalization to unseen tasks at the expense of performance on held-in tasks, which limits its practical applicability in real-world deployment scenarios. We observe that current token-level routing mechanisms neglect the global semantic context of the input task. This token-wise independence hinders effective expert selection for held-in tasks, as routing decisions fail to incorporate the semantic properties of the task. To address this, we propose, Global and Local Instruction Driven Expert Router (GLIDER) that integrates a multi-scale routing mechanism, encompassing a semantic global router and a learned local router. The global router leverages LLM's advanced reasoning capabilities for semantic-related contexts to enhance expert selection. Given the input query and LLM, the router generates semantic task instructions that guide the retrieval of the most relevant experts across all layers. This global guidance is complemented by a local router that facilitates token-level routing decisions within each module, enabling finer control and enhanced performance on unseen tasks. Our experiments using T5-based models for T0 and FLAN tasks demonstrate that GLIDER achieves substantially improved held-in performance while maintaining strong generalization on held-out tasks. We also perform ablations experiments to dive deeper into the components of GLIDER. Our experiments highlight the importance of our multi-scale routing that leverages LLM-driven semantic reasoning for MoErging methods.

Large language model (LLM) routing has emerged as a crucial strategy for balancing computational costs with performance by dynamically assigning queries to the most appropriate model based on query complexity. Despite recent advances showing that preference-data-based routers can outperform traditional methods, current evaluation benchmarks remain limited. They largely focus on general model capabilities while overlooking task-specific behaviors and critical concerns such as privacy, safety, and potential backdoor vulnerabilities introduced through preference data. In response, we propose the DSC benchmark: Diverse, Simple, and Categorized, an evaluation framework that categorizes router performance across a broad spectrum of query types, including coding, translation, mathematics, human instructions, general knowledge, and LLM jailbreaking. Additionally, it integrates privacy and safety assessments to reveal hidden risks. Our experiments on three preference-based routers and two commercial counterparts demonstrate that while these systems improve efficiency, they often make suboptimal, category-driven decisions. For instance, a BERT-based router directs all coding and mathematics queries to the most powerful LLM even when simpler models would suffice, while routing jailbreaking attempts to weaker models, thereby elevating safety risks.

LLM routing matters most in long-horizon applications such as coding agents, deep research systems, and computer-use agents, where a single user request triggers many model calls. Routing each call to the cheapest sufficient model can cut costs without sacrificing quality, yet existing router benchmarks evaluate routers only on one-shot prompts. They never expose the router-visible prefix at an intermediate agent step, never test whether a cheaper replacement preserves downstream task success, and often rely on online LLM judges at evaluation time. We introduce TwinRouterBench, a step-level routing benchmark with two tracks. The static track provides 970 router-visible prefixes from 520 instances across SWE-bench, BFCL, mtRAG, QMSum, and PinchBench, each paired with an execution-verified target tier estimated under a released downgrade-and-cascade protocol; scoring is deterministic arithmetic over tier labels, trajectory membership, and token costs, with no online evaluator-side LLM judge. The dynamic track supplies a harness that runs routers on the full 500-case SWE-bench Verified suite; in this paper we report a 100-case held-out evaluation disjoint from the static SWE supervision split. At each LLM call the router selects a concrete model from a locked pool, and success is measured by official task resolution and realized API spend. The two tracks support fast offline iteration followed by end-to-end validation under live agent execution. Code and data are available at https://github.com/CommonstackAI/TwinRouterBench.

Mixture-of-Experts (MoE) layers increase model capacity by activating only a small subset of experts per token, and typically rely on a learned router to map hidden states to expert assignments. In this work, we ask whether a dedicated learned router is strictly necessary in the MoE settings we study. We propose Self-Routing, a parameter-free routing mechanism that uses a designated subspace of the token hidden state directly as expert logits, eliminating the router projection entirely while leaving the rest of the MoE layer unchanged. We evaluate Self-Routing on GPT-2-scale language modeling and ImageNet-1K classification by comparing it against a standard learned router, random-routing baselines, and dense non-MoE baselines. Our results show that Self-Routing remains competitive with the learned-router baseline while removing all dedicated routing parameters, and yields more balanced expert utilization, with about 17 % higher average normalized routing entropy and no explicit load-balancing loss. On ImageNet-1K with DeiT-S/16, Self-Routing also slightly improves over the corresponding learned-router MoE. These findings suggest that effective MoE routing can emerge from the hidden representation itself without requiring a separate learned router module.

Large language models (LLMs) exhibit impressive capabilities across a wide range of tasks, yet the choice of which model to use often involves a trade-off between performance and cost. More powerful models, though effective, come with higher expenses, while less capable models are more cost-effective. To address this dilemma, we propose several efficient router models that dynamically select between a stronger and a weaker LLM during inference, aiming to optimize the balance between cost and response quality. We develop a training framework for these routers leveraging human preference data and data augmentation techniques to enhance performance. Our evaluation on widely-recognized benchmarks shows that our approach significantly reduces costs-by over 2 times in certain cases-without compromising the quality of responses. Interestingly, our router models also demonstrate significant transfer learning capabilities, maintaining their performance even when the strong and weak models are changed at test time. This highlights the potential of these routers to provide a cost-effective yet high-performance solution for deploying LLMs.

Defining query difficulty is one of the hardest problems in deployment engineering. Existing LLM routers rely on surface features such as domain labels, keywords, and token count, ignoring the within-domain variance that actually determines model success. Frontier models cost ten to one hundred times more than local open-weight models, so at production scale even small per-request savings become a direct cloud-bill lever. We present Brick, a multimodal router that scores each model on six capability dimensions, combines this with a per-query difficulty estimate, and dispatches via a cost-penalized geometric rule. A continuous preference knob lets operators slide between max-quality and max-saving profiles at deploy time. On a benchmark of 5,504 queries, Brick at max-quality reaches 76.98% accuracy, beating the best single model (75.02%) and all tested routers. At a neutral cost-quality profile, Brick achieves 74.11% accuracy at 4.71x lower cost than always using the strongest model. At min-cost, it cuts cost 22.15x with 11.85 points accuracy loss. Median latency drops from 51.2s to 22.8s.

Designing a high-efficiency and high-quality expressive network architecture has always been the most important research topic in the field of deep learning. Most of today's network design strategies focus on how to integrate features extracted from different layers, and how to design computing units to effectively extract these features, thereby enhancing the expressiveness of the network. This paper proposes a new network design strategy, i.e., to design the network architecture based on gradient path analysis. On the whole, most of today's mainstream network design strategies are based on feed forward path, that is, the network architecture is designed based on the data path. In this paper, we hope to enhance the expressive ability of the trained model by improving the network learning ability. Due to the mechanism driving the network parameter learning is the backward propagation algorithm, we design network design strategies based on back propagation path. We propose the gradient path design strategies for the layer-level, the stage-level, and the network-level, and the design strategies are proved to be superior and feasible from theoretical analysis and experiments.

Modern Mixture-of-Experts (MoE) architectures allocate expert capacity through a rigid per-layer rule: each transformer layer owns a separate expert set. This convention couples depth scaling with linear expert-parameter growth and assumes that every layer needs isolated expert capacity. However, recent analyses and our routing probe challenge this allocation rule: replacing a deeper layer's learned top-k router with uniform random routing drops downstream accuracy by only 1.0-1.6 points across multiple production MoE models. Motivated by this redundancy, we propose UniPool, an MoE architecture that treats expert capacity as a global architectural budget by replacing per-layer expert ownership with a single shared pool accessed by independent per-layer routers. To enable stable and balanced training under sharing, we introduce a pool-level auxiliary loss that balances expert utilization across the entire pool, and adopt NormRouter to provide sparse and scale-stable routing into the shared expert pool. Across five LLaMA-architecture model scales (182M, 469M, 650M, 830M, and 978M parameters) trained on 30B tokens from the Pile, UniPool consistently improves validation loss and perplexity over the matched vanilla MoE baselines. Across these scales, UniPool reduces validation loss by up to 0.0386 relative to vanilla MoE. Beyond raw loss improvement, our results identify pool size as an explicit depth-scaling hyperparameter: reduced-pool UniPool variants using only 41.6%-66.7% of the vanilla expert-parameter budget match or outperform layer-wise MoE at the tested scales. This shows that, under a shared-pool design, expert parameters need not grow linearly with depth; they can grow sublinearly while remaining more efficient and effective than vanilla MoE. Further analysis shows that UniPool's benefits compose with finer-grained expert decomposition.

Recent advances in adversarial attacks uncover the intrinsic vulnerability of modern deep neural networks. Since then, extensive efforts have been devoted to enhancing the robustness of deep networks via specialized learning algorithms and loss functions. In this work, we take an architectural perspective and investigate the patterns of network architectures that are resilient to adversarial attacks. To obtain the large number of networks needed for this study, we adopt one-shot neural architecture search, training a large network for once and then finetuning the sub-networks sampled therefrom. The sampled architectures together with the accuracies they achieve provide a rich basis for our study. Our "robust architecture Odyssey" reveals several valuable observations: 1) densely connected patterns result in improved robustness; 2) under computational budget, adding convolution operations to direct connection edge is effective; 3) flow of solution procedure (FSP) matrix is a good indicator of network robustness. Based on these observations, we discover a family of robust architectures (RobNets). On various datasets, including CIFAR, SVHN, Tiny-ImageNet, and ImageNet, RobNets exhibit superior robustness performance to other widely used architectures. Notably, RobNets substantially improve the robust accuracy (~5% absolute gains) under both white-box and black-box attacks, even with fewer parameter numbers. Code is available at https://github.com/gmh14/RobNets.

Advanced 2.5D Systems-in-Package (SiPs) compose a growing portion of high-performance systems. While the packaging and interconnect choices play a large role in the overall system design, system architects still lack a suitable framework for early design space exploration which takes these choices into account. Current interconnect models fall mostly into the categories of 1) detailed models which are generally inflexible and require deep packaging expertise, or 2) high-level models which don't provide enough information to make accurate architectural design decisions. In this work, we present an automated chiplet IP generation framework which provides power, performance, and area estimates for various 2.5D packaging and communication configurations. The IP generator produces standard collaterals required for high-level simulation/estimation, RTL simulation, and place-and-route-level implementation (Verilog, Liberty, LEF, and datasheet). Using our framework, architects can co-optimize the package and chiplet architecture through rapid power, performance, and area estimates of various packaging strategies. As a case study, we examine generated UCIe interfaces across several packaging options.

By routing input tokens to only a few split experts, Sparse Mixture-of-Experts has enabled efficient training of large language models. Recent findings suggest that fixing the routers can achieve competitive performance by alleviating the collapsing problem, where all experts eventually learn similar representations. However, this strategy has two key limitations: (i) the policy derived from random routers might be sub-optimal, and (ii) it requires extensive resources during training and evaluation, leading to limited efficiency gains. This work introduces \HyperRout, which dynamically generates the router's parameters through a fixed hypernetwork and trainable embeddings to achieve a balance between training the routers and freezing them to learn an improved routing policy. Extensive experiments across a wide range of tasks demonstrate the superior performance and efficiency gains of \HyperRouter compared to existing routing methods. Our implementation is publicly available at {{https://github.com/giangdip2410/HyperRouter}}.

Model merging has emerged as a cost-effective approach for consolidating the capabilities of multiple LLMs without retraining. However, existing merging techniques, largely based on linear parameter arithmetic or optimization, struggle when applied to Mixture-of-Experts (MoE) architectures. We identify a critical failure mode in MoE merging, termed routing breakdown, in which the merged router fails to dispatch tokens to suitable experts. Routing breakdown stems from the sensitivity of the non-linear softmax and discrete Top-k routing mechanisms to parameter perturbations from merging, a sensitivity further amplified by load-balancing constraints imposed during MoE pretraining. Because fine-tuned experts exhibit distinct specializations, even modest misrouting can cause severe performance degradation. To address this issue, we propose Hessian-Aware Router Calibration (HARC), a training-free framework that leverages second-order curvature information to realign the merged router. This approach admits a closed-form solution that can be efficiently solved using a matrix-free conjugate gradient method. Experiments on mathematical reasoning and code generation tasks show that HARC effectively mitigates routing breakdown across diverse MoE merging baselines and leads to substantial performance improvements. Our code is available at https://github.com/huangcb01/HARC.

Large language model (LLM) routing aims to assign each query to the most suitable model from a heterogeneous candidate pool, improving the quality--efficiency trade-off of LLM inference. Existing routers are typically learned through local fitting: a router is optimized for a particular query workload and candidate pool, and often requires additional supervision or retraining as the routing environment changes. We ask whether LLM routing can instead be approached from a foundation-model perspective, learning a reusable routing capability that generalizes across tasks, candidate models, and deployment conditions. To this end, we introduce RouteFM, which learns to characterize anonymous candidate models from behavioral context and infer their target-specific capabilities, rather than binding routing decisions to fixed model identities or a single environment. Through episodic pretraining across heterogeneous routing environments, this capability can be reused by a frozen router and adapted to new environments through context alone. Experiments demonstrate transfer across changes in domains, modalities, candidate pools, and context budgets, with the largest gains when behavioral evidence is limited. On MMR-Bench, which is excluded from pretraining, RouteFM outperforms the strongest baseline by 2.23 quality points with only eight observations per candidate. These results support moving LLM routing from repeated local fitting toward a pretrain once, route anywhere paradigm. Our code is publicly available at https://github.com/LAMDA-Model-Reuse/RouteFM.

Model routing aims to select the most suitable model from a candidate pool for each query, balancing quality and cost. Existing VLM routing research is limited to traditional VQA evaluation, lacks systematic calibration optimization for open-set scenarios, and employs training objectives that dilute multi-positive signals via softmax normalization without incorporating cost. We address these limitations with three contributions: (1)VLM-ExecRouterBench, the first execution-oriented VLM routing benchmark covering Code, Agentic, and Search domains with 11 candidate models spanning nearly two orders of magnitude in pricing; (2)SCOPE-Router, a dual-tower router that matches queries to model behavior profiles constructed via hybrid calibration (random/diagnostic/diversity sampling), enabling new models to join routing without retraining; (3)CRM+RCCR, an architecture-agnostic cost-aware objective that encodes cost preference into continuous relevance targets through per-pair independent scoring, eliminating multi-positive dilution while regularizing queries with similar routing preferences to be closer in the routing space. Empirically, SCOPE-Router achieves the best Rank Score on all three benchmarks, surpassing the runner-up by 1.84 points under OOD settings and by 6.75 points under doubly OOD open-set evaluation. When applied to four diverse routers, CRM+RCCR improves Rank Score by 1.25--6.21 points.

As large language models (LLMs) diversify across modalities, capabilities, and cost profiles, the problem of intelligent request routing -- selecting the right model for each query at inference time -- has become a critical systems challenge. We present vLLM Semantic Router, a signal-driven decision routing framework for Mixture-of-Modality (MoM) model deployments. The central innovation is composable signal orchestration: the system extracts heterogeneous signal types from each request -- from sub-millisecond heuristic features (keyword patterns, language detection, context length, role-based authorization) to neural classifiers (domain, embedding similarity, factual grounding, modality) -- and composes them through configurable Boolean decision rules into deployment-specific routing policies. Different deployment scenarios -- multi-cloud enterprise, privacy-regulated, cost-optimized, latency-sensitive -- are expressed as different signal-decision configurations over the same architecture, without code changes. Matched decisions drive semantic model routing: over a dozen of selection algorithms analyze request characteristics to find the best model cost-effectively, while per-decision plugin chains enforce privacy and safety constraints (jailbreak detection, PII filtering, hallucination detection via the three-stage HaluGate pipeline). The system provides OpenAI API support for stateful multi-turn conversations, multi-endpoint and multi-provider routing across heterogeneous backends (vLLM, OpenAI, Anthropic, Azure, Bedrock, Gemini, Vertex AI), and a pluggable authorization factory supporting multiple auth providers. Deployed in production as an Envoy external processor, the architecture demonstrates that composable signal orchestration enables a single routing framework to serve diverse deployment scenarios with differentiated cost, privacy, and safety policies.

With the rapid growth in the number of Large Language Models (LLMs), there has been a recent interest in LLM routing, or directing queries to the cheapest LLM that can deliver a suitable response. Following this line of work, we introduce CARROT, a Cost AwaRe Rate Optimal rouTer that can select models based on any desired trade-off between performance and cost. Given a query, CARROT selects a model based on estimates of models' cost and performance. Its simplicity lends CARROT computational efficiency, while our theoretical analysis demonstrates minimax rate-optimality in its routing performance. Alongside CARROT, we also introduce the Smart Price-aware Routing (SPROUT) dataset to facilitate routing on a wide spectrum of queries with the latest state-of-the-art LLMs. Using SPROUT and prior benchmarks such as Routerbench and open-LLM-leaderboard-v2 we empirically validate CARROT's performance against several alternative routers.

The performance of a language model has been shown to be effectively modeled as a power-law in its parameter count. Here we study the scaling behaviors of Routing Networks: architectures that conditionally use only a subset of their parameters while processing an input. For these models, parameter count and computational requirement form two independent axes along which an increase leads to better performance. In this work we derive and justify scaling laws defined on these two variables which generalize those known for standard language models and describe the performance of a wide range of routing architectures trained via three different techniques. Afterwards we provide two applications of these laws: first deriving an Effective Parameter Count along which all models scale at the same rate, and then using the scaling coefficients to give a quantitative comparison of the three routing techniques considered. Our analysis derives from an extensive evaluation of Routing Networks across five orders of magnitude of size, including models with hundreds of experts and hundreds of billions of parameters.

Sparse Mixture-of-Experts (MoE) architectures employ increasingly sophisticated routing mechanisms -- learned routers, multi-hop trajectories, token-dependent gating. We ask: does routing topology actually determine language modeling quality? We build a geometric MoE (ST-MoE) using cosine-similarity routing against learned centroids in a low-dimensional space (d_{space} = 64), requiring 80% fewer routing parameters than standard linear routers. Through 62 controlled experiments on WikiText-103 at 76--84M parameters trained to convergence (50K steps, 1.64B tokens), we find that routing topology does not determine asymptotic perplexity (PPL): five cosine-routing variants are statistically equivalent within a 1-PPL margin (Two One-Sided Tests [TOST], p < 0.05 for all 10 pairwise comparisons; 15 runs across 3 seeds, observed range 33.93--34.72). The finding extends to hash, random-fixed, and top-1 routing (single-seed; graceful 1.1--2.2 PPL degradation) and replicates on OpenWebText (0.03 PPL gap, 6 runs, 3 seeds each). A standard linear router with 5.3times more routing parameters reaches PPL 32.76, but iso-parameter cosine routing closes 67% of this gap -- the true mechanism advantage is sim1.2%. The mechanistic explanation is convergent redundancy: multi-hop updates are collinear (cos(Δh_0, Δh_1) = 0.805), implementing magnitude amplification rather than compositional reasoning; a single learnable scalar replicates multi-hop performance. As a practical payoff, zero-shot relative-norm halting saves 25% of MoE FLOPs at +0.12% PPL. Expert-level specialization and causal controllability -- which coexist with topology-level equifinality -- are explored in a companion paper.

Agent performance depends on both the underlying model and the harness that manages its tool use and execution. Selecting a suitable pair requires accounting for their compatibility, yet training samples may cover only a subset of the growing combination space. We introduce HM-Router, a routing method that jointly selects a model and harness for each query. It learns separate model and harness representations shared across routes, with an interaction term inspired by canonical polyadic (CP) tensor decomposition to capture how their compatibility varies with the query. This sharing allows training samples from observed pairs to inform predictions for unobserved combinations. We curate a benchmark from 12 public agent benchmarks, covering 293 routes, 73 models, and 25 harnesses. HM-Router exceeds the strongest evaluated learned baseline by 7.3 percentage points in mean routing accuracy and leads at all seven evaluated cost budgets on the six-benchmark subset. When 90% of routes have their training outcomes withheld, allowing unobserved combinations improves normalized accuracy by 15.8 points over restricting the same router to observed routes. HM-Router has also demonstrated training sample efficiency for new routes and components and generalization to unseen benchmarks. Our code and data are open-sourced at https://github.com/hmarkc/HM-Router.

Traditional transformer models often allocate a fixed amount of computational resources to every input token, leading to inefficient and unnecessary computation. To address this, the Mixture of Depths (MoD) was introduced to dynamically adjust the computational depth by skipping less important layers. Despite its promise, current MoD approaches remain under-explored and face two main challenges: (1) high training costs due to the need to train the entire model along with the routers that determine which layers to skip, and (2) the risk of performance degradation when important layers are bypassed. In response to the first issue, we propose Router-Tuning, a method that fine-tunes only the router on a small dataset, drastically reducing the computational overhead associated with full model training. For the second challenge, we propose MindSkip, which deploys Attention with Dynamic Depths. This method preserves the model's performance while significantly enhancing computational and memory efficiency. Extensive experiments demonstrate that our approach delivers competitive results while dramatically improving the computation efficiency, e.g., 21\% speedup and only a 0.2\% performance drop. The code is released at https://github.com/CASE-Lab-UMD/Router-Tuning.

Computer Use Agents (CUAs) translate natural-language instructions into Graphical User Interface (GUI) actions such as clicks, keystrokes, and scrolls by relying on a Vision-Language Model (VLM) to interpret screenshots and predict grounded tool calls. However, grounding accuracy varies dramatically across VLMs, while current CUA systems typically route every action to a single fixed model regardless of difficulty. We propose Adaptive VLM Routing (AVR), a framework that inserts a lightweight semantic routing layer between the CUA orchestrator and a pool of VLMs. For each tool call, AVR estimates action difficulty from multimodal embeddings, probes a small VLM to measure confidence, and routes the action to the cheapest model whose predicted accuracy satisfies a target reliability threshold. For warm agents with memory of prior UI interactions, retrieved context further narrows the capability gap between small and large models, allowing many actions to be handled without escalation. We formalize routing as a cost--accuracy trade-off, derive a threshold-based policy for model selection, and evaluate AVR using ScreenSpot-Pro grounding data together with the OpenClaw agent routing benchmark. Across these settings, AVR projects inference cost reductions of up to 78\% while staying within 2 percentage points of an all-large-model baseline. When combined with the Visual Confused Deputy guardrail, AVR also escalates high-risk actions directly to the strongest available model, unifying efficiency and safety within a single routing framework. Materials are also provided Model, benchmark, and code: https://github.com/vllm-project/semantic-router.

The rapid advancement of large language models (LLMs) and domain-specific AI agents has greatly expanded the ecosystem of AI-powered services. User queries, however, are highly diverse and often span multiple domains and task types, resulting in a complex and heterogeneous landscape. This diversity presents a fundamental routing challenge: how to accurately direct each query to an appropriate execution unit while optimizing both performance and efficiency. To address this, we propose MoMA (Mixture of Models and Agents), a generalized routing framework that integrates both LLM and agent-based routing. Built upon a deep understanding of model and agent capabilities, MoMA effectively handles diverse queries through precise intent recognition and adaptive routing strategies, achieving an optimal balance between efficiency and cost. Specifically, we construct a detailed training dataset to profile the capabilities of various LLMs under different routing model structures, identifying the most suitable tasks for each LLM. During inference, queries are dynamically routed to the LLM with the best cost-performance efficiency. We also introduce an efficient agent selection strategy based on a context-aware state machine and dynamic masking. Experimental results demonstrate that the MoMA router offers superior cost-efficiency and scalability compared to existing approaches.

Heterogeneous LLM serving stacks split scheduling into two layers that optimize in isolation: model routers pick a model from quality and cost signals while ignoring instance load, and serving load balancers optimize queues while ignoring quality. We present RouteBalance, a serving-aware scheduling layer that fuses both into a single online assignment over concrete model instances, jointly trading off quality, latency, and cost. A batched in-process predictor stack and dead-reckoned instance state keep the joint decision cheap on the request hot path (approx32 ms at 12 req/s). On a 13-instance, 28-GPU heterogeneous cluster serving four model sizes, a single deployed RouteBalance stack traces the upper region of the three-way quality-cost-throughput frontier. Sweeping one weight vector reaches both the highest routing-decision quality (DeepEval 0.419, +0.013 over the strongest baseline, 95% CI [{+}0.005,{+}0.022]; the ordering holds when a second judge re-scores the actually served text) and, at its cost-priority corner, per-request cost that ties the cheapest baseline. With router engineering equalized against concurrent-scoring baseline variants we build, its balanced preset serves at 2.8 s and 30 req/s, leading 2.6 to 4.1times ahead of enhanced BEST-Route at high load. (Deploying those routers as published, one serial scoring call per request, makes them collapse 23times under load, a deployment-architecture effect we isolate separately, not the routing result.) A four-arm isolation shows the benefit follows from pricing latency at model-selection time; the learned predictors contribute calibration and SLO headroom rather than the headline frontier. Code: https://github.com/AKafakA/route-balance

Differentiable architecture search (DARTS) provided a fast solution in finding effective network architectures, but suffered from large memory and computing overheads in jointly training a super-network and searching for an optimal architecture. In this paper, we present a novel approach, namely, Partially-Connected DARTS, by sampling a small part of super-network to reduce the redundancy in exploring the network space, thereby performing a more efficient search without comprising the performance. In particular, we perform operation search in a subset of channels while bypassing the held out part in a shortcut. This strategy may suffer from an undesired inconsistency on selecting the edges of super-net caused by sampling different channels. We alleviate it using edge normalization, which adds a new set of edge-level parameters to reduce uncertainty in search. Thanks to the reduced memory cost, PC-DARTS can be trained with a larger batch size and, consequently, enjoys both faster speed and higher training stability. Experimental results demonstrate the effectiveness of the proposed method. Specifically, we achieve an error rate of 2.57% on CIFAR10 with merely 0.1 GPU-days for architecture search, and a state-of-the-art top-1 error rate of 24.2% on ImageNet (under the mobile setting) using 3.8 GPU-days for search. Our code has been made available at: https://github.com/yuhuixu1993/PC-DARTS.

Vision-language MoE batches contain different numbers of image and text tokens. Image resolution, image count, tiling, and prompt length all change this token mix. We call the standard token-level Switch auxiliary loss Std-Aux. Std-Aux balances only the mixed load, so large image and text load errors can cancel at one mix. On our main model, the same trained router shows more than a fivefold change in load imbalance across image resolutions. We hold the image and text load profiles fixed and derive the exact load curve as the token mix varies. The image-text load gap controls sensitivity to the token mix. Physical preprocessing can also change the conditional profiles. The fixed-profile law excludes such changes. To design a remedy, we examine the router input structure. Image and text occupy distinct regions, while visual tokens group strongly by source image. The modality boundary motivates separate image and text terms. The image boundary motivates one equal-weight routing instance per image. ReBA, or Relax Within, Balance Across, implements both choices. Across four split backbones, ReBA lowers load on every reported benchmark input while keeping mean task accuracy comparable to Std-Aux. ReBA also lowers average load over the tested range and worst physical load under resolution and tiling shifts. Code is available at https://github.com/ZiangWu-77/ReBA.

Modern software systems are guided by hierarchical architectural concepts -- software architectures, reference architectures, and architectural frameworks -- each operating at a distinct level of abstraction. These artifacts promote reuse, scalability, and consistency, but also embed tradeoffs that shape critical quality attributes such as modifiability, performance, and security. Existing evaluation methods, such as the Architecture Tradeoff Analysis Method (ATAM), focus on system-specific architectures and are not designed to address the broader generality and variability of higher-level architectural forms. To close this gap, we introduce the Architecture Tradeoff and Risk Analysis Framework (ATRAF) -- a unified, scenario-driven framework for evaluating tradeoffs and risks across architectural levels. ATRAF encompasses three methods: the Architecture Tradeoff and Risk Analysis Method (ATRAM), extending ATAM with enhanced risk identification for concrete systems; the Reference Architecture Tradeoff and Risk Analysis Method (RATRAM), adapting ATRAM to the evaluation of domain-level reference architectures; and the Architectural Framework Tradeoff and Risk Analysis Method (AFTRAM), supporting the evaluation of architectural frameworks that guide entire system families. All three methods follow an iterative spiral process that enables the identification of sensitivities, tradeoffs, and risks while supporting continuous refinement of architectural artifacts. We demonstrate ATRAF through progressively abstracted examples derived from the Remote Temperature Sensor (RTS) case, originally introduced in the ATAM literature. ATRAF equips architects, reference modelers, and framework designers with a practical, systematic approach for analyzing design alternatives and managing quality attribute tradeoffs early in the lifecycle and across all levels of architectural abstraction.

Many applications must provide low-latency LLM service to users or risk unacceptable user experience. However, over-provisioning resources to serve fluctuating request patterns is often prohibitively expensive. In this work, we present a best-effort serving system that employs deep reinforcement learning to adjust service quality based on the task distribution and system load. Our best-effort system can maintain availability with over 10x higher client request rates, serves above 96% of peak performance 4.1x more often, and serves above 98% of peak performance 2.3x more often than static serving on unpredictable workloads. Our learned router is robust to shifts in both the arrival and task distribution. Compared to static serving, learned best-effort serving allows for cost-efficient serving through increased hardware utility. Additionally, we argue that learned best-effort LLM serving is applicable in wide variety of settings and provides application developers great flexibility to meet their specific needs.

Text-to-image (T2I) diffusion models have demonstrated impressive image generation capabilities. Still, their computational intensity prohibits resource-constrained organizations from deploying T2I models after fine-tuning them on their internal target data. While pruning techniques offer a potential solution to reduce the computational burden of T2I models, static pruning methods use the same pruned model for all input prompts, overlooking the varying capacity requirements of different prompts. Dynamic pruning addresses this issue by utilizing a separate sub-network for each prompt, but it prevents batch parallelism on GPUs. To overcome these limitations, we introduce Adaptive Prompt-Tailored Pruning (APTP), a novel prompt-based pruning method designed for T2I diffusion models. Central to our approach is a prompt router model, which learns to determine the required capacity for an input text prompt and routes it to an architecture code, given a total desired compute budget for prompts. Each architecture code represents a specialized model tailored to the prompts assigned to it, and the number of codes is a hyperparameter. We train the prompt router and architecture codes using contrastive learning, ensuring that similar prompts are mapped to nearby codes. Further, we employ optimal transport to prevent the codes from collapsing into a single one. We demonstrate APTP's effectiveness by pruning Stable Diffusion (SD) V2.1 using CC3M and COCO as target datasets. APTP outperforms the single-model pruning baselines in terms of FID, CLIP, and CMMD scores. Our analysis of the clusters learned by APTP reveals they are semantically meaningful. We also show that APTP can automatically discover previously empirically found challenging prompts for SD, e.g., prompts for generating text images, assigning them to higher capacity codes.

Standard transport protocols like TCP operate as a blind, FIFO conveyor belt for data, a model that is increasingly suboptimal for latency-sensitive and interactive applications. This paper challenges this model by introducing CATS (Conductor-driven Asymmetric Transport Scheme), a framework that provides TCP with the semantic awareness necessary to prioritize critical content. By centralizing scheduling intelligence in a transport-native "Conductor", CATS significantly improves user-perceived performance by delivering essential data first. This architecture directly confronts a cascade of historical performance workarounds and their limitations, including the high overhead of parallel connections in HTTP/1.1, the transport-layer Head-of-Line blocking in HTTP/2, and the observed implementation heterogeneity of prioritization in HTTP/3 over QUIC. Built upon TCP BBR, our ns-3 implementation demonstrates this principle by reducing the First Contentful Paint by over 78% in a representative webpage download configured as a deliberate worst-case scenario, with no penalty to total page load time compared to the baseline.

We propose DAGFormer, a Transformer language model whose cross-layer connections are planned by a jointly trained topology predictor. Beyond the residual connections in a standard Transformer, DAGFormer adds direct connections from earlier layers to later ones, and the predictor controls the strength of every connection based on input tokens. Unlike existing cross-layer routing architectures, which set each layer's connections separately, DAGFormer plans the routing of the whole model at once. On matched OLMo-2 pairs from 75M to 1B parameters, DAGFormer lowers WikiText-2 perplexity by 17% to 25% over the vanilla Transformer, and a 1B DAGFormer trained on 5B tokens outperforms the vanilla model trained on 10B. Against four routing baselines with the same data and budget, it reaches the lowest perplexity at 75M, 300M and 1B. The gain carries over to 13 commonsense, science, reading and math evaluation tasks (2.0 to 2.5 points higher mean accuracy at 300M and 1B) and to instruction finetuning (63% to 70% AlpacaEval win rate against the vanilla Transformer, leading every routing baseline), and under structured pruning DAGFormer degrades the least in five of six settings.

Sparse Mixture-of-Experts (SMoE) models enable scaling language models efficiently, but training them remains challenging, as routing can collapse onto few experts and auxiliary load-balancing losses can reduce specialization. Motivated by these hurdles, we study how routing decisions in SMoEs are formed mechanistically. First, we reveal a geometric coupling between routers and their corresponding experts. For a given token, the router weights for the selected expert and the expert weights processing it receive gradients along the same input direction, differing only in scalar coefficients. Thus, matched router--expert directions accumulate the same routed token history. This theoretical coupling also appears empirically in routing dynamics. In a 1B SMoE trained from scratch, higher router scores predict stronger expert neuron activations, showing that routing decisions are mirrored inside the selected expert. Next, we analyze the effects of auxiliary load balancing on the router--expert geometric coupling, showing that such losses break this structure by spreading input-directed gradients across router weights, making distinct router directions nearly three times more similar to each other. Last, we demonstrate the centrality of geometric coupling for effective routing with a parameter-free online K-Means router, in which each expert maintains a running average of the hidden states routed to it and tokens are assigned based on cosine similarity. Compared with auxiliary-loss and loss-free balancing, this router achieves the lowest load imbalance with only a modest perplexity increase, indicating that geometric coupling captures a substantial part of what the router learns. Overall, our results explain how routers form assignment geometry that supports an effective division of labor.

Graph-based Multi-Agent Systems (MAS) enable complex cyclic workflows but suffer from inefficient static model allocation, where deploying strong models uniformly wastes computation on trivial sub-tasks. We propose CASTER (Context-Aware Strategy for Task Efficient Routing), a lightweight router for dynamic model selection in graph-based MAS. CASTER employs a Dual-Signal Router that combines semantic embeddings with structural meta-features to estimate task difficulty. During training, the router self-optimizes through a Cold Start to Iterative Evolution paradigm, learning from its own routing failures via on-policy negative feedback. Experiments using LLM-as-a-Judge evaluation across Software Engineering, Data Analysis, Scientific Discovery, and Cybersecurity demonstrate that CASTER reduces inference cost by up to 72.4% compared to strong-model baselines while matching their success rates, and consistently outperforms both heuristic routing and FrugalGPT across all domains.

Existing Large Language Model (LLM) routing methods score LLMs independently to select top-k models. However, this ignores model correlations and enforces a rigid computational budget. Consequently, routers often select redundant models that share failure modes, limiting the overall probability of success. To address this, we propose FlexRouter, a routing framework that explicitly models model complementarity. FlexRouter optimizes for answer coverage, maximizing the probability that at least one selected model yields a correct response. This objective aligns with practical inference pipelines where multiple candidate outputs are generated and a downstream verifier or user selects the final one. We formulate routing as a coverage-oriented subset selection problem and model the routing policy using Determinantal Point Processes (DPPs), which naturally capture both model competence and redundancy. To directly optimize coverage without requiring a ground-truth target subset, we introduce a training objective based on marginalizing over failure sets. During inference, we employ a greedy strategy based on marginal log-determinant gains, enabling the router to adaptively determine subset sizes without a predefined budget. Extensive experiments on the large-scale RouterEval benchmark demonstrate that our proposed FlexRouter achieves higher coverage with lower redundancy across both in-domain and out-of-domain tasks than strong baselines while maintaining flexible inference cost.

Modern agentic workflows decompose complex tasks into specialized subtasks and route them to diverse models to minimize cost without sacrificing quality. However, current routing architectures focus exclusively on performance optimization, leaving underlying trade-offs between model capability and cost unrecorded. Without clear rationale, developers cannot distinguish between intelligent efficiency -- using specialized models for appropriate tasks -- and latent failures caused by budget-driven model selection. We present Topaz, a framework that introduces formal auditability to agentic routing. Topaz replaces silent model assignments with an inherently interpretable router that incorporates three components: (i) skill-based profiling that synthesizes performance across diverse benchmarks into granular capability profiles (ii) fully traceable routing algorithms that utilize budget-based and multi-objective optimization to produce clear traces of how skill-match scores were weighed against costs, and (iii) developer-facing explanations that translate these traces into natural language, allowing users to audit system logic and iteratively tune the cost-quality tradeoff. By making routing decisions interpretable, Topaz enables users to understand, trust, and meaningfully steer routed agentic systems.

Despite being the cornerstone of deep learning, backpropagation is criticized for its inherent sequentiality, which can limit the scalability of very deep models. Such models faced convergence issues due to vanishing gradient, later resolved using residual connections. Variants of these are now widely used in modern architecture. However, the computational cost of backpropagation remains a major burden, accounting for most of the training time. Taking advantage of residual-like architectural designs, we introduce Highway backpropagation, a parallelizable iterative algorithm that approximates backpropagation, by alternatively i) accumulating the gradient estimates along the residual path, and ii) backpropagating them through every layer in parallel. This algorithm is naturally derived from a decomposition of the gradient as the sum of gradients flowing through all paths and is adaptable to a diverse set of common architectures, ranging from ResNets and Transformers to recurrent neural networks. Through an extensive empirical study on a large selection of tasks and models, we evaluate Highway-BP and show that major speedups can be achieved with minimal performance degradation.

Agentic language model systems alternate between two structurally distinct step types: structured tool calls (short, deterministic, low perplexity) and open-ended planning/reasoning steps (long, complex, high perplexity). Despite this heterogeneity, current inference systems apply identical compute to every step. We introduce LayerRoute, a lightweight adapter that learns to selectively skip transformer blocks on a per-input basis. LayerRoute augments each of the 24 transformer blocks in Qwen2.5-0.5B-Instruct with: (1) a per-layer router (~897 parameters, Linear(896,1)) that outputs a hard binary gate via the straight-through estimator, and (2) LoRA adapters (rank 8, ~1.08M parameters) on the Q/K/V/O attention projections. The backbone weights remain frozen. A single end-to-end training pass on agentic data (Hermes, Glaive, GSM8K, Turing) with a gate regularisation term forces the system to discover which blocks are skippable per input type. After 3,000 steps (6.4 minutes on an A100 40GB), LayerRoute achieves a 12.91% skip differential: tool calls skip 15.25% of FLOPs while planning steps skip only 2.34%, using only 1.10M trainable parameters (0.22% of the 494M backbone). Quality improves over the base model due to LoRA adaptation, with perplexity delta of -1.29 on tool calls and -1.30 on planning.

Large language models (LLMs) often exhibit complementary strengths. Model routing harnesses these strengths by dynamically directing each query to the most suitable model, given a candidate model pool. However, routing performance relies on accurate model representations, and adding new models typically requires retraining, limiting scalability. To address these challenges, we propose a novel routing method using in-context vectors to represent model capabilities. The method proceeds in two stages. First, queries are embedded and projected into vectors, with a projector and LLM-based router trained to reconstruct the original queries, aligning vector representations with the router's semantic space. Second, each candidate model is profiled on a query set, and the router learns -- based on in-context vectors of query and model performance -- to predict whether each model can correctly answer new queries. Extensive experiments demonstrate that our method achieves state-of-the-art routing performance in both in-distribution and out-of-distribution tasks. Moreover, our method allows for seamless integration of new models without retraining the router. The code is available at https://github.com/lalalamdbf/ICL-Router.

We present Cascadia, a system for serving large language models on fleets of commodity Intel AIPCs using their CPU, integrated-GPU, and NPU resources. Every node embeds ingress, scheduling, and execution; inference requests require no dedicated routing control plane. Nodes join a libp2p QUIC mesh using CA-issued ed25519 admission certificates, gossip signed capabilities, exchange live load over direct peer streams, and route OpenAI-compatible requests to eligible peers. An operator-run certificate authority handles admission and fleet management outside the inference path. Three serving modes share one interface: whole-model execution on one node, load-balanced replicas, and pipeline-sharded chains using the compilation and speculative decoding mechanism of our companion paper. Optional KV-cache mobility reuses compatible conversation prefixes after a routing move, with cold recomputation on a miss. Signed response receipts and hash-chained logs support provenance and audit. A three-node Phi-3.5-mini NPU testbed delivered 3.10x the response throughput of its one-node configuration under ten concurrent requests; a separate four-node deployment recorded 4.06x the throughput of direct single-node serving. Paired latency observations, runtime measurements, and internal functional checks characterize the tested configurations. We compare Cascadia with IBM, Nutanix, VMware, and HPE platforms on deployment footprint, hardware requirements, scheduling, scaling, licensing, and trust, using vendor documentation. The paper repository provides benchmark scripts, curated measurements, and a claim-to-evidence map.

There is a rapidly growing number of open-source Large Language Models (LLMs) and benchmark datasets to compare them. While some models dominate these benchmarks, no single model typically achieves the best accuracy in all tasks and use cases. In this work, we address the challenge of selecting the best LLM out of a collection of models for new tasks. We propose a new formulation for the problem, in which benchmark datasets are repurposed to learn a "router" model for this LLM selection, and we show that this problem can be reduced to a collection of binary classification tasks. We demonstrate the utility and limitations of learning model routers from various benchmark datasets, where we consistently improve performance upon using any single model for all tasks.

Large language model (LLM) routing aims to select the most suitable model for each incoming query. Most existing routers learn this decision directly from query embeddings, model representations, preference data, or clusters of similar examples. Such approaches can be effective, yet the representation used for routing rarely states what a query actually requires. We introduce SeLMRoute, a routing framework that separates the extraction of candidate-independent semantic evidence from the learning of candidate performance and the application of deployment objectives. A decision model first evaluates a set of interpretable questions about the query, such as its reasoning requirements and use of external knowledge, with each judgment retained as a probability distribution. The resulting probabilistic semantic state is used by a lightweight supervised router to estimate candidate model performance. Routing objectives are applied after performance estimation, which allows the same semantic state to support performance-oriented and cost-aware decisions. On the LLMRouterBench (15 datasets, 20 candidate models, 11,481 queries), SeLMRoute achieves an average accuracy of 72.08% pm 0.45, while grouped five-fold out-of-fold evaluation reaches 72.64%, compared with 69.23% for the strongest fixed candidate. The representation achieves the highest mean performance among the evaluated semantic, dense, lexical, and domain-level representations. In a separate 13-model performance-cost setting, SeLMRoute improves performance in all five grouped splits, with a mean PerfGain of 2.66%. Our code is available at https://github.com/Indigma-Innovations/SeLMRoute.

We present RouteJudge, an online pairwise preference evaluation framework for LLM routing systems, with a public platform available at https://routejudge.cn. Different from model-level response evaluation, RouteJudge focuses on router-level decision quality. For each user query, multiple routing strategies independently recommend candidate models under the same model pool and budget constraints. The selected model responses are then presented to users through anonymous pairwise comparisons, and the resulting user preferences are attributed back to the routing strategies behind the compared responses. Each evaluation record stores the query, routing decisions, model responses, preference labels, cost, latency, and task metadata, enabling preference-aware, cost-aware, and task-conditioned analysis of LLM routers. To support the continuous expansion of routing methods in RouteJudge, we further release ORBIT (Optimal Routing and Budgeted Inference Toolbox), a modular and extensible toolbox that standardizes the end-to-end workflow of LLM routing. ORBIT provides unified interfaces for benchmark loading, query representation, router implementation, budget-aware evaluation, and method comparison, allowing researchers to develop and evaluate routing algorithms under consistent protocols. It also serves as the submission and integration layer for RouteJudge: researchers can implement routing methods within ORBIT, validate them on existing routing benchmarks, and submit compatible routers for online preference-based evaluation. The code of ORBIT is available at https://github.com/LAMDA-Model-Reuse/ORBIT.

Model routing chooses which language model to use for each query. By sending easy queries to cheaper models and hard queries to stronger ones, it can significantly reduce inference cost while maintaining high accuracy. However, most existing routers treat this as a fixed choice among a small set of models, which makes them hard to adapt to new models or changing budget constraints. In this paper, we propose SCOPE (Scalable and Controllable Outcome Performance Estimator), a routing framework that goes beyond model selection by predicting their cost and performance. Trained with reinforcement learning, SCOPE makes reasoning-based predictions by retrieving how models behave on similar problems, rather than relying on fixed model names, enabling it to work with new, unseen models. Moreover, by explicitly predicting how accurate and how expensive a model will be, it turns routing into a dynamic decision problem, allowing users to easily control the trade-off between accuracy and cost. Experiments show that SCOPE is more than just a cost-saving tool. It flexibly adapts to user needs: it can boost accuracy by up to 25.7% when performance is the priority, or cut costs by up to 95.1% when efficiency matters most.

Research in efficient vision backbones is evolving into models that are a mixture of convolutions and transformer blocks. A smart combination of both, architecture-wise and component-wise is mandatory to excel in the speedaccuracy trade-off. Most publications focus on maximizing accuracy and utilize MACs (multiply accumulate operations) as an efficiency metric. The latter however often do not measure accurately how fast a model actually is due to factors like memory access cost and degree of parallelism. We analyzed common modules and architectural design choices for backbones not in terms of MACs, but rather in actual throughput and latency, as the combination of the latter two is a better representation of the efficiency of models in real applications. We applied the conclusions taken from that analysis to create a recipe for increasing hardware-efficiency in macro design. Additionally we introduce a simple slimmed-down version of MultiHead Self-Attention, that aligns with our analysis. We combine both macro and micro design to create a new family of hardware-efficient backbone networks called LowFormer. LowFormer achieves a remarkable speedup in terms of throughput and latency, while achieving similar or better accuracy than current state-of-the-art efficient backbones. In order to prove the generalizability of our hardware-efficient design, we evaluate our method on GPU, mobile GPU and ARM CPU. We further show that the downstream tasks object detection and semantic segmentation profit from our hardware-efficient architecture. Code and models are available at https://github.com/ altair199797/LowFormer.

In the last few years, the Internet throughput, usage and reliability have increased almost exponentially. The introduction of broadband wireless mobile ad hoc networks (MANETs) and cellular networks together with increased computational power have opened the door for a new breed of applications to be created, namely real-time multimedia applications. Delivering real-time multimedia traffic over a complex network like the Internet is a particularly challenging task since these applications have strict quality-of-service (QoS) requirements on bandwidth, delay, and delay jitter. Traditional Internet protocol (IP)-based best effort service is not able to meet these stringent requirements. The time-varying nature of wireless channels and resource constrained wireless devices make the problem even more difficult. To improve perceived media quality by end users over wireless Internet, QoS supports can be addressed in different layers, including application layer, transport layer and link layer. Cross layer design is a well-known approach to achieve this adaptation. In cross-layer design, the challenges from the physical wireless medium and the QoS-demands from the applications are taken into account so that the rate, power, and coding at the physical (PHY) layer can adapted to meet the requirements of the applications given the current channel and network conditions. A number of propositions for cross-layer designs exist in the literature. In this chapter, an extensive review has been made on these cross-layer architectures that combine the application-layer, transport layer and the link layer controls. Particularly, the issues like channel estimation techniques, adaptive controls at the application and link layers for energy efficiency, priority based scheduling, transmission rate control at the transport layer, and adaptive automatic repeat request (ARQ) are discussed in detail.

The rapid growth of large language models (LLMs) with diverse capabilities, costs, and domains has created a critical need for intelligent model selection at inference time. While smaller models suffice for routine queries, complex tasks demand more capable models. However, static model deployment does not account for the complexity and domain of incoming queries, leading to suboptimal performance and increased costs. Dynamic routing systems that adaptively select models based on query characteristics have emerged as a solution to this challenge. We provide a systematic analysis of state-of-the-art multi-LLM routing and cascading approaches. In contrast to mixture-of-experts architectures, which route within a single model, we study routing across multiple independently trained LLMs. We cover diverse routing paradigms, including query difficulty, human preferences, clustering, uncertainty quantification, reinforcement learning, multimodality, and cascading. For each paradigm, we analyze representative methods and examine key trade-offs. Beyond taxonomy, we introduce a conceptual framework that characterizes routing systems along three dimensions: when decisions are made, what information is used, and how they are computed. This perspective highlights that practical systems are often compositional, integrating multiple paradigms under operational constraints. Our analysis demonstrates that effective multi-LLM routing requires balancing competing objectives. Choosing the optimal routing strategy depends on deployment and computational constraints. Well-designed routing systems can outperform even the most powerful individual models by strategically leveraging specialized capabilities across models while maximizing efficiency gains. Meanwhile, open challenges remain in developing routing mechanisms that generalize across diverse architectures, modalities, and applications.

Tool-using LLM agents face a reliability-cost tradeoff: routing every decision through the LLM improves correctness but incurs high latency and inference cost, while pre-coded workflow graphs reduce cost but become brittle under unanticipated compound tool failures. We present Self-Healing Router, a fault-tolerant orchestration architecture that treats most agent control-flow decisions as routing rather than reasoning. The system combines (i) parallel health monitors that assign priority scores to runtime conditions such as tool outages and risk signals, and (ii) a cost-weighted tool graph where Dijkstra's algorithm performs deterministic shortest-path routing. When a tool fails mid-execution, its edges are reweighted to infinity and the path is recomputed -- yielding automatic recovery without invoking the LLM. The LLM is reserved exclusively for cases where no feasible path exists, enabling goal demotion or escalation. Prior graph-based tool-use systems (ControlLLM, ToolNet, NaviAgent) focus on tool selection and planning; our contribution is runtime fault tolerance with deterministic recovery and binary observability -- every failure is either a logged reroute or an explicit escalation, never a silent skip. Across 19 scenarios spanning three graph topologies (linear pipeline, dependency DAG, parallel fan-out), Self-Healing Router matches ReAct's correctness while reducing control-plane LLM calls by 93% (9 vs 123 aggregate) and eliminating the silent-failure cases observed in a well-engineered static workflow baseline under compound failures.

As large language models (LLMs) grow in scale and specialization, routing--selecting the best model for a given input--has become essential for efficient and effective deployment. While recent methods rely on complex learned routing strategies, their dependence on disparate training data and evaluation setups makes comparison and generalization difficult. In this work, we revisit LLM routing through the lens of simplicity. We show that a well-tuned k-Nearest Neighbors (kNN) approach not only matches but often outperforms state-of-the-art learned routers across diverse tasks. To support systematic evaluation, we introduce a suite of standardized routing benchmarks spanning instruction-following, question-answering, and reasoning tasks, as well as the first multi-modal routing dataset involving visual inputs. Our findings reveal that the locality properties of model performance in embedding space enable simple non-parametric methods to achieve strong routing decisions with lower sample complexity than parametric approaches. This challenges the prevailing trend toward sophisticated architectures and highlights the importance of thoroughly evaluating simple baselines before investing in complex solutions. To support reproducibility and further exploration, we will release all benchmarks and code upon publication.

Sparsely activated Mixture-of-Experts (MoE) models are widely adopted to scale up model capacity without increasing the computation budget. However, vanilla TopK routers are trained in a discontinuous, non-differentiable way, limiting their performance and scalability. To address this issue, we propose ReMoE, a fully differentiable MoE architecture that offers a simple yet effective drop-in replacement for the conventional TopK+Softmax routing, utilizing ReLU as the router instead. We further propose methods to regulate the router's sparsity while balancing the load among experts. ReMoE's continuous nature enables efficient dynamic allocation of computation across tokens and layers, while also exhibiting domain specialization. Our experiments demonstrate that ReMoE consistently outperforms vanilla TopK-routed MoE across various model sizes, expert counts, and levels of granularity. Furthermore, ReMoE exhibits superior scalability with respect to the number of experts, surpassing traditional MoE architectures. The implementation based on Megatron-LM is available at https://github.com/thu-ml/ReMoE.

Multi-Agent Systems(MAS) have become a powerful paradigm for building high performance intelligent applications. Within these systems, the router responsible for determining which expert agents should handle a given query plays a crucial role in overall performance. Existing routing strategies generally fall into two categories: performance routing, which balances latency and cost across models of different sizes, and task routing, which assigns queries to domain-specific experts to improve accuracy. In real-world enterprise applications, task routing is more suitable; however, most existing approaches rely on static single-label decisions, which introduce two major limitations: (i) difficulty in seamlessly integrating new agents as business domains expand, and (ii) routing conflicts caused by overlapping agent capabilities, ultimately degrading accuracy and robustness.To address these challenges, we propose TCAndon-Router(TCAR): an adaptive reasoning router for multi-agent collaboration. Unlike traditional routers, TCAR supports dynamic agent onboarding and first generates a natural-language reasoning chain before predicting a set of candidate agents capable of handling the query. In addition, we design a collaborative execution pipeline in which selected agents independently produce responses, which are then aggregated and refined into a single high-quality response by a dedicated Refining Agent.Experiments on public datasets and real enterprise data demonstrate that TCAR significantly improves routing accuracy, reduces routing conflicts, and remains robust in ambiguous scenarios. We have released TCAR at https://huggingface.co/tencent/TCAndon-Router to support future research on explainable and collaborative multi-agent routing.

Large language model agents are increasingly executed not by a single model call, but by an execution harness that manages observation, context, control, action, state, and verification. At the same time, frontier and open models are becoming structurally specialized: a model that is strong at code editing, long-context recovery, tool use, mathematical reasoning, or low-latency response may not dominate on the other axes. This makes model selection inside an agent a core systems problem rather than a per-query serving trick. Existing routing methods mostly optimize single-turn cost-quality trade-offs and therefore miss the execution state, intermediate failures, and feedback loops that make agents different from chat completion. We propose Harness-Native agentic routing, a step-level routing paradigm that selects either a single best-fit model for cost-effective execution or multiple complementary models for ensemble-style accuracy improvement, conditioned on the full harness state. The key insight is that every routing decision naturally produces a structured data record -- consisting of the query, harness state, model choice or model set, execution trace, outcome, and cost -- whose labels are supplied by the environment rather than by the router itself. These records form a harness-native data flywheel: execution traces train better routers and harness-native models, which improve cost-quality trade-offs and generate more traces under the same budget. We instantiate this idea in OpenSquilla with a four-layer routing stack, an open LightGBM cold-start ranker, and a staged router-model path that turns logged arena records into progressively stronger routing policies. The report studies singleton and multi-model routing on agentic benchmarks including DRACO and PinchBench, and argues that agentic routing is not merely cost control, but a data engine for agent-native training.

We introduce a new function-preserving transformation for efficient neural architecture search. This network transformation allows reusing previously trained networks and existing successful architectures that improves sample efficiency. We aim to address the limitation of current network transformation operations that can only perform layer-level architecture modifications, such as adding (pruning) filters or inserting (removing) a layer, which fails to change the topology of connection paths. Our proposed path-level transformation operations enable the meta-controller to modify the path topology of the given network while keeping the merits of reusing weights, and thus allow efficiently designing effective structures with complex path topologies like Inception models. We further propose a bidirectional tree-structured reinforcement learning meta-controller to explore a simple yet highly expressive tree-structured architecture space that can be viewed as a generalization of multi-branch architectures. We experimented on the image classification datasets with limited computational resources (about 200 GPU-hours), where we observed improved parameter efficiency and better test results (97.70% test accuracy on CIFAR-10 with 14.3M parameters and 74.6% top-1 accuracy on ImageNet in the mobile setting), demonstrating the effectiveness and transferability of our designed architectures.

Recent works show that assembling multiple off-the-shelf large language models (LLMs) can harness their complementary abilities. To achieve this, routing is a promising method, which learns a router to select the most suitable LLM for each query. However, existing routing models are ineffective when multiple LLMs perform well for a query. To address this problem, in this paper, we propose a method called query-based Router by Dual Contrastive learning (RouterDC). The RouterDC model consists of an encoder and LLM embeddings, and we propose two contrastive learning losses to train the RouterDC model. Experimental results show that RouterDC is effective in assembling LLMs and largely outperforms individual top-performing LLMs as well as existing routing methods on both in-distribution (+2.76\%) and out-of-distribution (+1.90\%) tasks. Source code is available at https://github.com/shuhao02/RouterDC.

Recent efforts to combine low-rank adaptation (LoRA) with mixture-of-experts (MoE) for adapting large language models (LLMs) to multiple tasks still exhibit prevailing limitations: they either swap entire attention/feed-forward layers for switch experts or bolt on parallel expert branches, diluting parameter efficiency and task fidelity. We propose the LoRA-Mixer, a modular and lightweight MoE framework that integrates LoRA experts. Our core innovation lies in replacing the projection matrices of the attention module's input/output linear layers with dynamically routed, task-specific LoRA experts. This design ensures seamless compatibility with diverse foundation models, including transformers and state space models (SSMs), by leveraging their inherent linear projection structures. The framework supports two operational paradigms: (1) joint optimization of LoRA experts and routing mechanisms via a novel hard-soft routing strategy, or (2) direct deployment of pre-trained, frozen LoRA modules sourced from external repositories. To enable robust router training with limited data while ensuring stable routing decisions and maximizing expert reuse, we introduce an adaptive Specialization Balance Loss (SBL) that jointly optimizes expert balance and task-specific alignment. Extensive experiments on seven benchmark datasets, including MedQA, CoLA, SST-2, GSM8K, ARC-E, ARC-C, and HumanEval, demonstrate the effectiveness of LoRA-Mixer. On datasets such as GSM8K, HumanEval, and MedQA, LoRA-Mixer achieves significant improvements of 7.61%, 4.88%, and 3.08% over the base models, respectively. Compared with state-of-the-art methods, LoRA-Mixer achieves additional improvements of 1.09%, 1.45%, and 1.68%, respectively, using only 48% of the parameters, demonstrating its efficiency and strong performance.

Cost-aware routing dynamically dispatches user queries to models of varying capability to balance performance and inference cost. However, the routing strategy introduces a new security concern that adversaries may manipulate the router to consistently select expensive high-capability models. Existing routing attacks depend on either white-box access or heuristic prompts, rendering them ineffective in real-world black-box scenarios. In this work, we propose R^2A, which aims to mislead black-box LLM routers to expensive models via adversarial suffix optimization. Specifically, R^2A deploys a hybrid ensemble surrogate router to mimic the black-box router. A suffix optimization algorithm is further adapted for the ensemble-based surrogate. Extensive experiments on multiple open-source and commercial routing systems demonstrate that {R^2A} significantly increases the routing rate to expensive models on queries of different distributions. Code and examples: https://github.com/thcxiker/R2A-Attack.

Large Language Models (LLM)-based systems, i.e. interconnected elements that include an LLM as a central component (e.g., conversational agents), are typically monolithic static architectures that rely on a single LLM for all user queries. However, they often require different preprocessing strategies, levels of reasoning, or knowledge. Generalist LLMs (i.e. GPT-4), trained on very large multi-topic corpora, can perform well in a variety of tasks. However, they require significant financial, energy, and hardware resources that may not be justified for basic tasks. This implies potentially investing in unnecessary costs for a given query. To overcome this problem, a routing mechanism routes user queries to the most suitable components, such as smaller LLMs or experts in specific topics. This approach may improve response quality while minimising costs. Routing can be expanded to other components of the conversational agent architecture, such as the selection of optimal embedding strategies. This paper explores key considerations for integrating routing into LLM-based systems, focusing on resource management, cost definition, and strategy selection. Our main contributions include a formalisation of the problem, a novel taxonomy of existing approaches emphasising relevance and resource efficiency, and a comparative analysis of these strategies in relation to industry practices. Finally, we identify critical challenges and directions for future research.

Domain Name System (DNS) resolution in Internet of Things (IoT) networks presents unique challenges due to resource constraints, unreliable connectivity, and security vulnerabilities. Traditional centralized DNS architectures introduce single points of failure. This paper presents MeshDNS, a cooperative DNS resolution framework designed for resource-constrained IoT environments operating under shared-key admission. MeshDNS employs a decentralized architecture where nodes maintain cache awareness using hash-based summaries and secure cold-cache misses via Ed25519-signed, identical-answer quorum voting. Our implementation on commodity ESP8266 microcontrollers (sub-50 KB usable RAM, 80 MHz) achieves a 0.47 ms warm-cache resolution, outperforming native mDNS baselines (1.39 ms). To secure initial cold-cache misses, MeshDNS trades a predictable ~1.3-1.7s cryptographic penalty to successfully isolate Byzantine faults among admitted peers. Assuming a threat model where physical hardware extraction remains out of scope, MeshDNS demonstrates Byzantine fault isolation. We validated the framework via a 5-node physical testbed and discrete-event simulations scaling to 1,000 nodes; the results demonstrate that MeshDNS maintains resilient local name caches for persistent edge telemetry under network churn. Code is available at https://github.com/mahbubasif/MeshDNS-Artifact.

Smart cities will be characterized by a variety of intelligent and networked services, each with specific requirements for the underlying network infrastructure. While smart city architectures and services have been studied extensively, little attention has been paid to the network technology. The KIGLIS research project, consisting of a consortium of companies, universities and research institutions, focuses on artificial intelligence for optimizing fiber-optic networks of a smart city, with a special focus on future mobility applications, such as automated driving. In this paper, we present early results on our process of collecting smart city requirements for communication networks, which will lead towards reference infrastructure and architecture solutions. Finally, we suggest directions in which artificial intelligence will improve smart city networks.

LLM routing has become a popular approach to improve the cost-quality trade-off of LLM services by dynamically selecting a model for each query. Recent work has explored a broad range of routing methods, including clustering-based routers, learned classifiers, pairwise ranking, and confidence-based approaches. Our extensive study of 21 routing methods across five benchmarks reveals a consistent phenomenon that we call the routing plateau: many methods, including kNN, achieve very similar accuracy and converge to a narrow performance range that remains far below the oracle router. Our investigation shows that the plateau is largely caused by a predictability bottleneck: current routers mainly learn global averaged model-performance trends rather than fine-grained query-specific routing signals. As a result, they solve overlapping easy queries but collectively fail on hard queries that require instance-specific routing decisions. We further study how to move beyond the plateau and find that larger training datasets, stronger encoders, and end-to-end fine-tuning can further improve routing accuracy. These findings characterize the common limits of current routing methods and provide insights and actionable directions for the community to build more effective routing systems.

Vision-language verifiers and routers must distinguish errors repairable by more reasoning from those caused by visual evidence never reaching the language model. This distinction lacks ground truth because annotators see full-resolution images while models receive preprocessed tensors. We introduce AliasForge to create cases where the relevant fact is provably absent from the interface. Fixed-point resampling makes the pre-rounding resize an exact integer linear map that can send nonzero integer perturbations to zero. Hiding a label-flipping perturbation there produces images with opposite step-correctness labels but bit-identical interface states. Every verifier therefore has the same output law on both members, giving pair-balanced accuracy exactly one half and zero gain from language-side repair. We prove that every fixed-point downscaler has such null vectors and bound their smallest size at the most common ratios, which rules out an 8-bit fit whenever the bound exceeds 255. From the resize configuration alone, a lattice criterion supplies realizable collisions and certifies their absence within the specified construction family. It resolves all 20 screened configurations, 17 as constructible and 3 as non-constructible. We construct certified pairs across three architectures and certify four additional processors, with zero decision-logit gap on all 18 scored pairs and none of the 18 controls. The pairs also screen routers that waste computation on re-attention or further reasoning. On natural items, per-item routing headroom exists, but no tested interface-only router improves over stopping. Our fiber ceiling bounds the headroom recoverable from the interface. Code: https://github.com/KurbanIntelligenceLab/aliasforge.

Mixture-of-Experts (MoE) architectures are often considered a natural fit for continual learning because sparse routing should localize updates and reduce interference, yet MoE Transformers still forget substantially even with sparse, well-balanced expert utilization. We attribute this gap to a pre-routing bottleneck: multi-head attention concatenates head-specific signals into a single post-attention router input, forcing routing to act on co-occurring feature compositions rather than separable head channels. We show that this router input simultaneously encodes multiple separately decodable semantic and structural factors with uneven head support, and that different feature compositions induce weakly aligned parameter-gradient directions; as a result, routing maps many distinct compositions to the same route. We quantify this collision effect via a route-wise effective composition number N_{eff} and find that higher N_{eff} is associated with larger old-task loss increases after continual training. Motivated by these findings, we propose MH-MoE, which performs head-wise routing over sub-representations to increase routing granularity and reduce composition collisions. On TRACE with Qwen3-0.6B/8B, MH-MoE effectively mitigates forgetting, reducing BWT on Qwen3-0.6B from 11.2% (LoRAMoE) to 4.5%.

The rapid expansion of distributed Artificial Intelligence (AI) workloads beyond centralized data centers creates a demand for new communication substrates. These substrates must operate reliably in heterogeneous and permissionless environments, where Network Address Translators (NATs) and firewalls impose significant constraints. Existing solutions, however, are either designed for controlled data center deployments or implemented as monolithic systems that tightly couple machine learning logic with networking code. To address these limitations, we present Lattica, a decentralized cross-NAT communication framework designed to support distributed AI systems. Lattica integrates three core components. First, it employs a robust suite of NAT traversal mechanisms to establish a globally addressable peer-to-peer mesh. Second, it provides a decentralized data store based on Conflict-free Replicated Data Types (CRDTs), ensuring verifiable and eventually consistent state replication. Third, it incorporates a content discovery layer that leverages distributed hash tables (DHTs) together with an optimized RPC protocol for efficient model synchronization. By integrating these components, Lattica delivers a complete protocol stack for sovereign, resilient, and scalable AI systems that operate independently of centralized intermediaries. It is directly applicable to edge intelligence, collaborative reinforcement learning, and other large-scale distributed machine learning scenarios.

Supervised fine-tuning (SFT) is a milestone in aligning large language models with human instructions and adapting them to downstream tasks. In particular, Low-Rank Adaptation (LoRA) has gained widespread attention due to its parameter efficiency. However, its impact on improving the performance of large models remains limited. Recent studies suggest that combining LoRA with Mixture-of-Experts (MoE) can significantly enhance fine-tuning performance. MoE adapts to the diversity and complexity of datasets by dynamically selecting the most suitable experts, thereby improving task accuracy and efficiency. Despite impressive results, recent studies reveal issues in the MoE routing mechanism, such as incorrect assignments and imbalanced expert allocation. Inspired by the principles of Redundancy and Fault Tolerance Theory. We innovatively integrate the concept of Mixture of Experts into the routing mechanism and propose an efficient fine-tuning method called Mixture of Routers (MoR). It employs multiple sub-routers for joint selection and uses a learnable main router to determine the weights of the sub-routers. The results show that MoR outperforms baseline models on most tasks, achieving an average performance improvement of 1%. MoR can serve as a plug-and-play, parameter-efficient fine-tuning method suitable for a wide range of applications. Our code is available here: https://anonymous.4open.science/r/MoR-DFC6.

Large language model (LLM) routing reduces serving cost by assigning each query to an appropriate model while preserving response quality. Learning such a router, however, often requires executing multiple candidate models on historical queries to collect query--model quality feedback, creating a nontrivial supervision cost before deployment. Existing work largely focuses on serving-time efficiency, overlooking whether the resulting savings are sufficient to recover this upfront expenditure. We further observe that routing quality often saturates well before all query--model feedback is collected, suggesting that dense supervision can be economically over-provisioned. We propose SaveRouter, a sparse-supervision routing framework that selectively acquires informative model feedback and shares capability information across related queries, while retaining query-level refinement for fine-grained routing. We evaluate routing by jointly accounting for supervision expenditure and subsequent serving-time savings. Across four routing benchmarks, the main setting uses only about 33--41% of available training feedback while maintaining competitive or better routing quality, and reduces the break-even deployment volume by approximately 1.9--9.5 times compared with the fastest conventional router. Further analysis shows that acquiring more supervision is not always economically preferable: the supervision level that minimizes serving cost can differ from the one that achieves the earliest payback. Our code is publicly available at https://github.com/LAMDA-Model-Reuse/SaveRouter.

Albeit being a prevalent architecture searching approach, differentiable architecture search (DARTS) is largely hindered by its substantial memory cost since the entire supernet resides in the memory. This is where the single-path DARTS comes in, which only chooses a single-path submodel at each step. While being memory-friendly, it also comes with low computational costs. Nonetheless, we discover a critical issue of single-path DARTS that has not been primarily noticed. Namely, it also suffers from severe performance collapse since too many parameter-free operations like skip connections are derived, just like DARTS does. In this paper, we propose a new algorithm called RObustifying Memory-Efficient NAS (ROME) to give a cure. First, we disentangle the topology search from the operation search to make searching and evaluation consistent. We then adopt Gumbel-Top2 reparameterization and gradient accumulation to robustify the unwieldy bi-level optimization. We verify ROME extensively across 15 benchmarks to demonstrate its effectiveness and robustness.

Edge deployment of large language models (LLMs) increasingly relies on libraries of lightweight LoRA adapters, yet GPU/DRAM can keep only a small resident subset at a time. Serving a request through a non-resident adapter requires paging its weights from storage, incurring measurable latency. This creates a two-timescale online control problem: on a slow timescale, the system selects which adapters remain resident in fast memory, while on a fast timescale it routes each request to an adapter whose context-dependent utility is unknown a priori. The two decisions are tightly coupled: the cache determines the cost of exploration, and the router determines which adapters receive informative feedback. We formulate this joint caching-and-routing problem as a two-timescale contextual bandit and propose POLAR (Paging and Online Learning for Adapter Routing). POLAR pairs a cache-aware LinUCB router with an epoch-based cache controller. We study two variants. A fixed-epoch version provides a robust baseline with worst-case regret guarantees under arbitrary contexts. An epoch-doubling version, POLAR+, adds forced exploration and improved cache optimization to achieve mathcal{O}(dNT+KT) sublinear regret under stochastic regularity and cacheability conditions, where N is the adapter count, K the cache size, d the context dimension, and T the horizon. The routing term matches the standard contextual-bandit rate up to logarithmic factors, showing that the memory hierarchy does not fundamentally slow routing learning. Experiments using 15 real LoRA adapters for Qwen2.5-7B together with measured GPU paging latencies show that adaptive cache control substantially outperforms non-adaptive baselines and exhibits scaling trends consistent with the theory.

The rapid expansion of interconnected devices, autonomous systems, and AI applications has created severe fragmentation in adaptive transport systems, where diverse protocols and context sources remain isolated. This survey provides the first systematic investigation of the Model Context Protocol (MCP) as a unifying paradigm, highlighting its ability to bridge protocol-level adaptation with context-aware decision making. Analyzing established literature, we show that existing efforts have implicitly converged toward MCP-like architectures, signaling a natural evolution from fragmented solutions to standardized integration frameworks. We propose a five-category taxonomy covering adaptive mechanisms, context-aware frameworks, unification models, integration strategies, and MCP-enabled architectures. Our findings reveal three key insights: traditional transport protocols have reached the limits of isolated adaptation, MCP's client-server and JSON-RPC structure enables semantic interoperability, and AI-driven transport demands integration paradigms uniquely suited to MCP. Finally, we present a research roadmap positioning MCP as a foundation for next-generation adaptive, context-aware, and intelligent transport infrastructures.

Large language model (LLM) routers improve the efficiency of multi-model systems by directing each query to the most appropriate model while leveraging the diverse strengths of heterogeneous LLMs. Most existing approaches frame routing as a classification problem based solely on the input query. While this reduces overhead by avoiding inference across all models, it overlooks valuable information that could be gleaned from potential outputs and fails to capture implicit intent or contextual nuances that often emerge only during response generation. These limitations can result in suboptimal routing decisions, particularly for complex or ambiguous queries that require deeper semantic understanding. To address this challenge, we propose Lookahead, a routing framework that "foresees" potential model outputs by predicting their latent representations and uses these predictions to guide model selection, thus enabling more informed routing without full inference. Within this framework, we implement two approaches based on causal and masked language models. Empirical evaluations across seven public benchmarks - spanning instruction following, mathematical reasoning, and code generation - show that Lookahead consistently outperforms existing routing baselines, achieving an average performance gain of 7.7% over the state-of-the-art. Our code is available at https://github.com/huangcb01/lookahead-routing.

Large language model (LLM) routing distributes inference work across different models, advancing the cost-quality Pareto frontier of LLM serving. While coarse-grained routing at the session or query level has been widely adopted in production systems, recent algorithmic work shows that fine-grained token-level routing can yield substantial efficiency and quality gains. However, efficiently serving token-level routed inference poses significant challenges to existing systems. Built on single-LLM assumptions, current systems suffer from severe step desynchronization and frequent batch admission delays under token-level routing, and they also impose high implementation complexity on developers. To address these challenges, we design TokenRouter, an efficient and developer-friendly serving system for token-level routed LLM inference. TokenRouter follows the principle of request-centric programming, model-centric execution: developers describe routing logic from the perspective of a single request, while the runtime launches a subserver for each LLM and dispatches requests asynchronously. Each subserver employs a delayed-batching scheduler, whose optimal hyperparameters are derived from a mathematical throughput model of the system. Across diverse routing algorithms, workloads, and model pairs, TokenRouter achieves 2.01-64.15x higher decoding throughput than existing systems, substantially advancing the serving efficiency of token-level LLM routing. Our code is available at https://github.com/thu-nics/TokenRouter.

Mixture-of-Experts (MoE) models are a promising way to scale up model capacity without significantly increasing computational cost. A key component of MoEs is the router, which decides which subset of parameters (experts) process which feature embeddings (tokens). In this paper, we present a comprehensive study of routers in MoEs for computer vision tasks. We introduce a unified MoE formulation that subsumes different MoEs with two parametric routing tensors. This formulation covers both sparse MoE, which uses a binary or hard assignment between experts and tokens, and soft MoE, which uses a soft assignment between experts and weighted combinations of tokens. Routers for sparse MoEs can be further grouped into two variants: Token Choice, which matches experts to each token, and Expert Choice, which matches tokens to each expert. We conduct head-to-head experiments with 6 different routers, including existing routers from prior work and new ones we introduce. We show that (i) many routers originally developed for language modeling can be adapted to perform strongly in vision tasks, (ii) in sparse MoE, Expert Choice routers generally outperform Token Choice routers, and (iii) soft MoEs generally outperform sparse MoEs with a fixed compute budget. These results provide new insights regarding the crucial role of routers in vision MoE models.

Efficient hyperparameter or architecture search methods have shown remarkable results, but each of them is only applicable to searching for either hyperparameters (HPs) or architectures. In this work, we propose a unified pipeline, AutoHAS, to efficiently search for both architectures and hyperparameters. AutoHAS learns to alternately update the shared network weights and a reinforcement learning (RL) controller, which learns the probability distribution for the architecture candidates and HP candidates. A temporary weight is introduced to store the updated weight from the selected HPs (by the controller), and a validation accuracy based on this temporary weight serves as a reward to update the controller. In experiments, we show AutoHAS is efficient and generalizable to different search spaces, baselines and datasets. In particular, AutoHAS can improve the accuracy over popular network architectures, such as ResNet and EfficientNet, on CIFAR-10/100, ImageNet, and four more other datasets.

Agentic AI systems represent a new frontier in artificial intelligence, where agents often based on large language models(LLMs) interact with tools, environments, and other agents to accomplish tasks with a degree of autonomy. These systems show promise across a range of domains, but their architectural underpinnings remain immature. This paper conducts a comprehensive review of the types of agents, their modes of interaction with the environment, and the infrastructural and architectural challenges that emerge. We identify a gap in how these systems manage tool orchestration at scale and propose a reusable design abstraction: the "Control Plane as a Tool" pattern. This pattern allows developers to expose a single tool interface to an agent while encapsulating modular tool routing logic behind it. We position this pattern within the broader context of agent design and argue that it addresses several key challenges in scaling, safety, and extensibility.

Multi-agent systems (MAS) powered by Large Language Models (LLMs) have been demonstrated to push the boundaries of LLM capabilities, yet they often incur significant costs and face challenges in dynamic LLM selection. Current LLM routing methods effectively reduce overhead in single-agent scenarios by customizing LLM selection for each query, but they overlook the critical decisions regarding collaboration modes and agent roles in MAS. In response to this challenge, we first introduce the problem of Multi-Agent System Routing (MASR), which integrates all components of MAS into a unified routing framework. Toward this goal, we propose MasRouter, the first high-performing, cost-effective, and inductive MASR solution. MasRouter employs collaboration mode determination, role allocation, and LLM routing through a cascaded controller network, progressively constructing a MAS that balances effectiveness and efficiency. Extensive experiments demonstrate that MasRouter is (1) high-performing, achieving a 1.8%sim8.2% improvement over the state-of-the-art method on MBPP; (2) economical, reducing overhead by up to 52.07% compared to SOTA methods on HumanEval; and (3) plug-and-play, seamlessly integrating with mainstream MAS frameworks, reducing overhead by 17.21%sim28.17% via customized routing. The code is available at https://github.com/yanweiyue/masrouter.

The Mixture-of-Experts (MoE) models have gained significant attention in deep learning due to their dynamic resource allocation and superior performance across diverse tasks. However, efficiently training these models remains challenging. The MoE upcycling technique has been proposed to reuse and improve existing model components, thereby minimizing training overhead. Despite this, simple routers, such as linear routers, often struggle with complex routing tasks within MoE upcycling. In response, we propose a novel routing technique called Router Upcycling to enhance the performance of MoE upcycling models. Our approach initializes multiple routers from the attention heads of preceding attention layers during upcycling. These routers collaboratively assign tokens to specialized experts in an attention-like manner. Each token is processed into diverse queries and aligned with the experts' features (serving as keys). Experimental results demonstrate that our method achieves state-of-the-art (SOTA) performance, outperforming other upcycling baselines.

Very Large Scale Integration (VLSI) global routing is an NP-hard combinatorial optimization problem requiring signal net assignment across capacity-constrained 3D grids while minimizing congestion, wirelength, and via transitions. Because traditional heuristics rely on static penalty schedules that fail on complex congestion topologies, we present AlphaRoute: a multi-objective adaptive search framework reformulating rip-up and reroute (R&R) into a dynamic optimization system. We introduce SHAP-based overflow decomposition to isolate per-net congestion, driving targeted subgraph extraction via 3D Dijkstra maze routing and an adaptive PathFinder policy. Crucially, AlphaRoute employs Large Language Models (LLMs) as semantic policy optimizers. Bounded by a deterministic knowledge graph, the LLMs interpret congestion metrics to dynamically adjust penalty parameters. Evaluated on ISPD 2025 benchmarks, AlphaRoute reduces overflow by 98.6% on MEMPOOL. On the constrained ARIANE design, we achieve an overflow of 146,109 (a 29.8x reduction in overflow over the state of the art), yielding a penalized score of S_orig = 0.0538 versus the State-of-the-art (SOTA) 1.780. These results demonstrate that superior algorithmic search geometry can overcome the latency of interpreted Python implementations.

Mixture-of-Experts (MoE) models lack explicit constraints to ensure the router's decisions align well with the experts' capabilities, which ultimately limits model performance. To address this, we propose expert-router coupling (ERC) loss, a lightweight auxiliary loss that tightly couples the router's decisions with expert capabilities. Our approach treats each expert's router embedding as a proxy token for the tokens assigned to that expert, and feeds perturbed router embeddings through the experts to obtain internal activations. The ERC loss enforces two constraints on these activations: (1) Each expert must exhibit higher activation for its own proxy token than for the proxy tokens of any other expert. (2) Each proxy token must elicit stronger activation from its corresponding expert than from any other expert. These constraints jointly ensure that each router embedding faithfully represents its corresponding expert's capability, while each expert specializes in processing the tokens actually routed to it. The ERC loss is computationally efficient, operating only on n^2 activations, where n is the number of experts. This represents a fixed cost independent of batch size, unlike prior coupling methods that scale with the number of tokens (often millions per batch). Through pre-training MoE-LLMs ranging from 3B to 15B parameters and extensive analysis on trillions of tokens, we demonstrate the effectiveness of the ERC loss. Moreover, the ERC loss offers flexible control and quantitative tracking of expert specialization levels during training, providing valuable insights into MoEs.