Daily Papers

Enterprise agents must follow long-horizon, conditional, safety-critical standard operating procedures (SOPs). We compile machine-readable SOP constraints into executable pseudo-code and run them with a program-guided (PG) stack machine that pages the active frame while an LLM performs semantic execution. A three-arm SOPBench study across six models separates representation from runtime: compiled text never significantly hurts and gains up to 16.0 points where official prose underperforms. Runtime guidance is capability-gated. Two strong models independently show positive seven-domain PG contrasts (58:19 and 75:31 discordant pairs), whereas weak models are harmed. A full-program cursor ablation (active frame first, complete program retained) recovers much of the strong-model refusal gain; selective visibility adds a smaller improvement. Paired probe and audit measurements track this divide to spontaneous state discipline rather than reconstruction ability. On Bank the three primary arms rise from 70.4 to 86.4 to 92.8, with 100% refusal correctness. Practical guidance: compile first; enable active-frame paging only after a model-level discipline check.

Foundation models increasingly guide robot actions, yet sustained autonomy requires efficient control and failure recovery. We introduce A2-MEAS, an embodied multi-agent framework built around code as a scaling interface. Learned correction codes combine corrective language, spatial evidence, execution history, and action proposals. MetaBrain provides training supervision and runtime guidance. A correction encoder and adapter absorb this knowledge into policy weights during training, while fresh codes adapt behavior with frozen weights at deployment. The action model, A2-WLA, adds motion-aware history and a latent world model to a vision-language-action policy. Surprisingly, this simple design with action pretraining and task specialization reaches 0.5755 Q-score on the 50-task BEHAVIOR 2026 public subset before online correction, 2.21x the 2025 winner's reported 0.2605 across different benchmark editions and training configurations. On all 100 BEHAVIOR 2026 public tasks, A2-MEAS achieves 0.6411 Q-score and 45.40% task success. On RoboTwin 2.0, A2-WLA achieves 93.98% average success, rising to 95.05% with the complete system. Across 12 real-robot tasks in five household settings, A2-WLA achieves 57.92% average success versus 26.67% for pi0.5. In long-horizon pour-over coffee preparation, a history-conditioned adapter raises post-failure completion at two filter-handling steps from 14% to 94% and from 8% to 82%, compared with A2-WLA retries. Our training infrastructure delivers 427.1 samples per second, 4.03x the throughput of a pi0.5 reference implementation on matched hardware. We will release the system, models, training scripts, and infrastructure to support efficient embodied learning.

First-Frame Propagation (FFP) offers a promising paradigm for controllable video editing, but existing methods are hampered by a reliance on cumbersome run-time guidance. We identify the root cause of this limitation as the inadequacy of current training datasets, which are often too short, low-resolution, and lack the task diversity required to teach robust temporal priors. To address this foundational data gap, we first introduce FFP-300K, a new large-scale dataset comprising 300K high-fidelity video pairs at 720p resolution and 81 frames in length, constructed via a principled two-track pipeline for diverse local and global edits. Building on this dataset, we propose a novel framework designed for true guidance-free FFP that resolves the critical tension between maintaining first-frame appearance and preserving source video motion. Architecturally, we introduce Adaptive Spatio-Temporal RoPE (AST-RoPE), which dynamically remaps positional encodings to disentangle appearance and motion references. At the objective level, we employ a self-distillation strategy where an identity propagation task acts as a powerful regularizer, ensuring long-term temporal stability and preventing semantic drift. Comprehensive experiments on the EditVerseBench benchmark demonstrate that our method significantly outperforming existing academic and commercial models by receiving about 0.2 PickScore and 0.3 VLM score improvement against these competitors.

The rapid advancement and widespread deployment of foundation model (FM) based systems have revolutionized numerous applications across various domains. However, the fast-growing capabilities and autonomy have also raised significant concerns about responsible AI and AI safety. Recently, there have been increasing attention toward implementing guardrails to ensure the runtime behavior of FM-based systems is safe and responsible. Given the early stage of FMs and their applications (such as agents), the design of guardrails have not yet been systematically studied. It remains underexplored which software qualities should be considered when designing guardrails and how these qualities can be ensured from a software architecture perspective. Therefore, in this paper, we present a taxonomy for guardrails to classify and compare the characteristics and design options of guardrails. Our taxonomy is organized into three main categories: the motivation behind adopting runtime guardrails, the quality attributes to consider, and the design options available. This taxonomy provides structured and concrete guidance for making architectural design decisions when designing guardrails and highlights trade-offs arising from the design decisions.

Large language model (LLM) agents are increasingly used for multi-step, stateful tool-use tasks, yet production reliability remains limited. Unlike static software repair, agent repair must recover dynamic trajectories whose early decisions can propagate into later errors and external state changes. Existing automatic remedies address only part of this problem: blind retry adds no diagnosis, outcome feedback says whether a run failed but not where or why, and self-reflection often lacks grounded evidence to prevent the same failure from recurring. We present AgentTether, a run-time repair framework that automates post-run diagnosis and guided recovery without modifying the underlying agent or environment. AgentTether abstracts each run into Transition Units, links them through a dependency-aware Critical Transition Graph, and localizes failure-critical subtrajectories by combining an offline normal-behavior model with a run-local graph detector. It then converts the localized cause into behavior-scoped guidance backed by cross-iteration Repair Memory, and can optionally apply guarded run-time intervention to keep the correction active during re-execution. The same design can be deployed as an offline diagnostic-and-guidance tool or as an online repair layer. We evaluate AgentTether on 261 tau-bench tasks across three domains with Qwen3.7-max, and test cross-model transfer on Banking with GPT-5.4. On the hardest Banking domain, AgentTether repairs 59.04% (49/83) of initially failed Qwen3.7-max tasks and 65.12% (56/86) of initially failed GPT-5.4 tasks. Overall, AgentTether improves repair effectiveness while reducing agent turns and end-to-end approach tokens, suggesting a practical reliability layer that can wrap existing agent deployments, reduce wasted re-execution, and improve recovery without retraining the agent.

Loop Engineering is emerging as a practice for organizing development work around coding agents. Instead of writing each prompt by hand, practitioners design loops that monitor progress, assign work, run checks, and decide what the agent should do next. Even with a capable coding agent, a loop may trust a stale progress note, skip needed verification, spend its budget in the wrong direction, or stop before the task is safe to submit. Yet the final outcome of one end-to-end run cannot tell whether success or failure reflects the loop's guidance or the coding agent's ability to carry out the task. We introduce LoopArena, a benchmark for evaluating how well one model can guide a separate coding agent through a long-running task. The model under evaluation is the Controller: after each coding round, it receives a structured summary of the run and instructs a separate, fixed coding agent, the Worker, on what to do or verify next, or decides whether to stop. LoopArena evaluates this ability in three complementary settings that differ in execution scope and cost. Type I scores next-step Loop Contract selection through execution-validated questions without running the Worker at evaluation time. Type II executes repeated control over a selected slice of a full task, while Type III evaluates the paired full task from its original state. On full tasks, the best observed Strict Success Rate is 24.69\%, leaving substantial room for improvement in long-horizon loop control. Across Controllers, the paired reduction in estimated inference cost averages 64.4\%, and Type II produces a similar ordering under the main Core criterion (Spearman's \(ρ=0.9747\)). We release the benchmark data and evaluation code at https://github.com/AMAP-ML/LoopArena .

Recently, skills have been widely adopted in large language model (LLM)-based agent systems across various domains. In existing frameworks, skills are typically injected into the agent reasoning loop as contextual guidance once matched to a runtime task, enabling specialized task-solving capabilities. We find that this execution paradigm introduces two major sources of redundancy: irrelevant context injection and repeated skill-specific reasoning and planning. To this end, we propose SkillSmith, a boundary-first compiler-runtime framework that compiles skill packages offline into minimal executable interfaces. By extracting fine-grained operational boundaries from skills, SkillSmith enables agents to dynamically access and execute only the relevant components at runtime, thereby minimizing unnecessary context injection and redundant reasoning overhead. In the evaluation on SkillsBench benchmark, SkillSmith reduces solve-stage token usage by 57.44%, thinking iterations by 42.99%, solve time by 50.57% (2.02x faster), and token-proportional monetary cost by 57.44% compared with using raw-skills. Moreover, compiled artifacts produced by a stronger model can be reused by a smaller or more efficient runtime model, improving task accuracy in cases where raw skill interpretation fails. The source code and data are available at https://github.com/AetherHeart-AI/Aeloon.

Autonomous coding agents are increasingly integrated into software development workflows, offering capabilities that extend beyond code suggestion to active system interaction and environment management. OpenClaw, a representative platform in this emerging paradigm, introduces an extensible skill ecosystem that allows third-party developers to inject behavioral guidance through lifecycle hooks during agent initialization. While this design enhances automation and customization, it also opens a novel and unexplored attack surface. In this paper, we identify and systematically characterize guidance injection, a stealthy attack vector that embeds adversarial operational narratives into bootstrap guidance files. Unlike traditional prompt injection, which relies on explicit malicious instructions, guidance injection manipulates the agent's reasoning context by framing harmful actions as routine best practices. These narratives are automatically incorporated into the agent's interpretive framework and influence future task execution without raising suspicion.We construct 26 malicious skills spanning 13 attack categories including credential exfiltration, workspace destruction, privilege escalation, and persistent backdoor installation. We evaluate them using ORE-Bench, a realistic developer workspace benchmark we developed. Across 52 natural user prompts and six state-of-the-art LLM backends, our attacks achieve success rates from 16.0% to 64.2%, with the majority of malicious actions executed autonomously without user confirmation. Furthermore, 94% of our malicious skills evade detection by existing static and LLM-based scanners. Our findings reveal fundamental tensions in the design of autonomous agent ecosystems and underscore the urgent need for defenses based on capability isolation, runtime policy enforcement, and transparent guidance provenance.

Multimodal LLM-powered agents have recently demonstrated impressive capabilities in web navigation, enabling agents to complete complex browsing tasks across diverse domains. However, current agents struggle with repetitive errors and lack the ability to learn from past experiences across sessions, limiting their long-term robustness and sample efficiency. We introduce WebCoach, a model-agnostic self-evolving framework that equips web browsing agents with persistent cross-session memory, enabling improved long-term planning, reflection, and continual learning without retraining. WebCoach consists of three key components: (1) a WebCondenser, which standardizes raw navigation logs into concise summaries; (2) an External Memory Store, which organizes complete trajectories as episodic experiences; and (3) a Coach, which retrieves relevant experiences based on similarity and recency, and decides whether to inject task-specific advice into the agent via runtime hooks. This design empowers web agents to access long-term memory beyond their native context window, improving robustness in complex browsing tasks. Moreover, WebCoach achieves self-evolution by continuously curating episodic memory from new navigation trajectories, enabling agents to improve over time without retraining. Evaluations on the WebVoyager benchmark demonstrate that WebCoach consistently improves the performance of browser-use agents across three different LLM backbones. With a 38B model, it increases task success rates from 47% to 61% while reducing or maintaining the average number of steps. Notably, smaller base models with WebCoach achieve performance comparable to the same web agent using GPT-4o.

Code models are increasingly trained with execution feedback, but most training signals still stop at correctness. This leaves an important gap for systems code: two programs can pass the same tests while differing greatly in runtime. We study how to train code agents to prefer faster correct implementations, rather than treating efficiency only as an evaluation metric. The key difficulty is that runtime is a fragile reward. It is meaningful only after a program is correct, varies across tasks, and gives little guidance when most sampled programs fail to compile or run. We propose RLPF, reinforcement learning from performance feedback, which turns execution outcomes into a staged reward. Failed programs are ordered by execution progress, while correct programs are ranked by their relative improvement from the baseline toward the expert reference. This gives useful feedback before correctness and performance-sensitive feedback after correctness. Fine-tuning Qwen3-32B with RLPF on PerfCodeBench raises correct-and-runnable solutions from 11.1% to 54.6% and improves relative efficiency from 8.1% to 38.6%. The trained model becomes competitive with stronger open-weight systems, and its optimization behavior transfers modestly to EffiBench-X. Additional studies show that model-generated references provide useful but weaker supervision, and that the full composite reward is more reliable than correctness-only or runtime-only baselines. These results suggest that code agents can be trained not only to pass tests, but also to optimize the programs they write.

LLM agents are rapidly evolving from coding assistants into autonomous software engineering systems. However, existing evaluation methodologies remain largely centered on static, isolated, and short-horizon benchmarks that fail to capture the dynamic complexity of real-world production workflows. As a result, benchmark performance may poorly reflect practical capability under realistic runtime environments involving long execution chains, tool interactions, dependency management, and iterative feedback loops. We thus present RAMP, a production-grounded infrastructure for assessing long-horizon software engineering agents. Built upon the YatCC integrated platform, RAMP provides a unified runtime assessment architecture through standardized orchestration and execution interfaces. RAMP introduces realistic compiler-construction workloads with serial dependencies and complex toolchain interactions, together with a staged recovery mechanism for analyzing execution behavior under partial workflow failure. The framework further incorporates utility-oriented multi-dimensional metrics that jointly evaluate outcome quality and process efficiency. We conduct runtime assessments across 15 mainstream models and observe substantial capability degradation that remains largely invisible to conventional isolated benchmarks. Task completion rates progressively collapse across serial workflows, dropping from 100% in the initial stage to only 20% in the final stage, while none of the evaluated models successfully completes the entire pipeline. Runtime analysis reveals systematic failure propagation and significant resource inefficiencies, with computational costs differing by up to three orders of magnitude among comparable models. These findings suggest RAMP advances agentic model evaluation toward continuous, runtime-observable, and production-grounded assessment.

We study a governed approach to enterprise analytics: a language model interprets the question, while deterministic policy selects and runs a pre-approved analytical program that returns both results and evidence. We show that this restriction can remain expressive within a defined analytical class, using relational operations plus aggregation, comparison, windows, ranking, and similarity. Fixed meaning, policy, data, and execution rules also make results replayable. Across 440 runs, three 8B models generated SQL and selected tools at runtime, while Qwen3-8B interpreted intent only and policy executed the approved program. None of 330 runtime-planning episodes matched the full answer-and-evidence contract across all test datasets; the policy-executed analyzer matched 110 of 110. This is a configuration-specific result, not evidence that runtime agents cannot succeed under other designs.

Interactive LLM agents are becoming part of daily work, but they do not reliably become easier to work with over time: a correction remembered in one session may still be violated in the next. We study this gap between preference access and preference compliance. In tasks derived from anonymized real-user friction cases, Mem0 memory still leaves 57.5% of applicable preference checks violated. We introduce Test-time Rule Acquisition and Compiled Enforcement (TRACE), a drop-in skill-layer pipeline for coding-agent runtimes that mines user corrections, rewrites them as atomic rules, and compiles them into runtime checks that must pass before an agent completes future tasks. Unlike runtime checks written ahead of time by developers, TRACE skills come from the user's own chat corrections. We evaluate TRACE with simulated user-in-the-loop experiments on ClawArena coding-agent tasks and MemoryArena-derived memory-intensive tasks. On ClawArena, TRACE reduces held-out preference violation from 100.0% to 37.6% on in-distribution tasks and from 100.0% to 2.0% on out-of-distribution tasks. On MemoryArena-derived tasks, TRACE reduces in-distribution violation from 100.0% to 60.5% while matching or exceeding the strongest memory baseline on task pass. These results suggest that compiling corrections into runtime enforcement can address a repeated-friction failure mode that memory alone does not reliably solve, reducing the need for users to restate the same correction across future sessions. Experiment code is available at https://github.com/YujunZhou/TRACE_exp, and the deployable skill is available at https://github.com/YujunZhou/tellonce.

Recent advances in mobile GUI agents have shown strong potential for automating mobile tasks, but most effective systems still depend on large vision-language models for screenshot understanding and long-horizon planning. Small GUI agents that can be deployed directly on mobile devices are more attractive for practical use, offering lower inference cost and better protection of sensitive on-device information. However, due to limited model capacity, such lightweight agents remain unreliable when planning and executing GUI tasks end-to-end from screenshots alone. We propose Knowledge-Oriented Behavior Exploration (UI-KOBE), a framework that improves lightweight mobile GUI agents with reusable app-specific graph knowledge. UI-KOBE first autonomously explores a mobile application and constructs an app knowledge graph, where nodes represent distinct UI states and edges represent executable transitions. At runtime, a lightweight GUI agent uses the graph as external guidance: given a user task and the current screenshot, it identifies the current graph node and selects among self-loop actions, neighboring transitions, task completion, or fallback free actions associated with that node. By supporting runtime decisions with app-specific graph guidance, UI-KOBE reduces the burden of end-to-end GUI planning and helps lightweight models perform mobile GUI tasks more effectively, offering a practical step toward efficient, interpretable, and privacy-conscious on-device GUI agents.

In this paper, we propose Bootstrapped Language-Image Pretraining-driven Fused State Representation in Proximal Policy Optimization (BLIP-FusePPO), a novel multimodal reinforcement learning (RL) framework for autonomous lane-keeping (LK), in which semantic embeddings generated by a vision-language model (VLM) are directly fused with geometric states, LiDAR observations, and Proportional-Integral-Derivative-based (PID) control feedback within the agent observation space. The proposed method lets the agent learn driving rules that are aware of their surroundings and easy to understand by combining high-level scene understanding from the VLM with low-level control and spatial signals. Our architecture brings together semantic, geometric, and control-aware representations to make policy learning more robust. A hybrid reward function that includes semantic alignment, LK accuracy, obstacle avoidance, and speed regulation helps learning to be more efficient and generalizable. Our method is different from the approaches that only use semantic models to shape rewards. Instead, it directly embeds semantic features into the state representation. This cuts down on expensive runtime inference and makes sure that semantic guidance is always available. The simulation results show that the proposed model is better at LK stability and adaptability than the best vision-based and multimodal RL baselines in a wide range of difficult driving situations. We make our code publicly available.

Agent benchmarks often evaluate only final answers even when agents run on stateful runtimes. We argue this under-specifies what is being evaluated: the proper unit is a declared model-plus-runtime configuration whose failures can occur in evidence acquisition, runtime routing, safety boundaries, or repeated execution. We present ClawProBench, a trace-aware benchmark for runtime-native agent evaluation instantiated on OpenClaw, a live agent runtime with workspace tools and native surfaces for browsing, memory, messaging, scheduling, skills, and subagents. ClawProBench defines two tracks: a 102-scenario full profile with live workspace and native-runtime routing tasks, and a frozen 68-scenario holdout with closed-world JSON output contracts for robust ranking. Trials are scored from execution traces via a safety-gated formula combining correctness, process quality, and efficiency, preserving failure evidence for audit. Our anonymous artifact includes benchmark definitions, scoring code, manifests and sanitized traces. We evaluate 68 configurations on the full profile and 37 on holdout. The top safety-gated average trace score is 0.7671. Native-runtime tasks underperform workspace-live tasks (0.5238 vs. 0.6415). On holdout, pass@k-any outperforms strict three-trial pass (0.6638 vs. 0.2890), while full-profile and holdout rankings show weak alignment (Spearman 0.1300). Rankings based purely on correctness differ substantially from process-aware, safety-gated and strict-pass views. Final-answer leaderboards may hide native-surface weaknesses, one-off successes and trace-local agent failure modes.

Strategic planning is critical for multi-step reasoning, yet compact Large Language Models (LLMs) often lack the capacity to formulate global strategies, leading to error propagation in long-horizon tasks. Our analysis reveals that LLMs possess latent reasoning capabilities that can be unlocked when conditioned on explicit plans from a teacher model; however, runtime reliance on external guidance is often impractical due to latency and availability constraints. To bridge this gap, we propose PILOT (Planning via Internalized Latent Optimization Trajectories), a non-invasive framework designed to internalize the strategic oversight of large models into intrinsic Latent Guidance. Instead of altering backbone weights, PILOT employs a lightweight Hyper-Network to synthesize a query-conditioned Latent Guidance vector. This vector acts as an internal steering mechanism, guiding the model's representations toward optimal reasoning paths. Extensive experiments on mathematical and coding benchmarks demonstrate that PILOT effectively stabilizes reasoning trajectories, consistently outperforming strong baselines (e.g., +8.9% on MATH500) with negligible inference latency.

Large language models (LLMs) have demonstrated strong code generation capabilities, yet the runtime performance of generated code is not guaranteed, and there have been few attempts to train LLMs using runtime performance as a reward in the HPC domain. We propose an online reinforcement learning approach that executes LLM-generated code on a supercomputer and directly feeds back the measured runtime performance (GFLOPS) as a reward. We further introduce a Staged Quality-Diversity (SQD) algorithm that progressively varies the permitted optimization techniques on a per-problem basis, enabling the model to learn code optimization from diverse perspectives. We build a distributed system connecting a GPU training cluster with a CPU benchmarking cluster, and train Qwen2.5 Coder 14B on a double-precision matrix multiplication task using Group Relative Policy Optimization (GRPO). Through two experiments, we show that reinforcement learning combining runtime performance feedback with staged optimization can improve the HPC code generation capability of LLMs.

Large Language Models (LLMs) have seen great advance in both academia and industry, and their popularity results in numerous open-source frameworks and techniques in accelerating LLM pre-training, fine-tuning, and inference. Training and deploying LLMs are expensive as it requires considerable computing resources and memory, hence many efficient approaches have been developed for improving system pipelines as well as operators. However, the runtime performance can vary significantly across hardware and software stacks, which makes it difficult to choose the best configuration. In this work, we aim to benchmark the performance from both macro and micro perspectives. First, we benchmark the end-to-end performance of pre-training, fine-tuning, and serving LLMs in different sizes , i.e., 7, 13, and 70 billion parameters (7B, 13B, and 70B) on three 8-GPU platforms with and without individual optimization techniques, including ZeRO, quantization, recomputation, FlashAttention. Then, we dive deeper to provide a detailed runtime analysis of the sub-modules, including computing and communication operators in LLMs. For end users, our benchmark and findings help better understand different optimization techniques, training and inference frameworks, together with hardware platforms in choosing configurations for deploying LLMs. For researchers, our in-depth module-wise analyses discover potential opportunities for future work to further optimize the runtime performance of LLMs.

The rapid expansion of capabilities in Large Language Model (LLM) agents has exposed a critical architectural bottleneck: when agents are given access to a flat, monolithic registry of tools, the model must evaluate hundreds or thousands of options simultaneously. This leads to decision-space explosion, context window saturation, and degraded routing accuracy. To address these limitations, this paper presents a hierarchical, skill-based architecture for agentic orchestration. Capabilities are organized as a rooted tree where internal nodes make routing decisions and leaf nodes execute deterministic tasks. The runtime enforces a single-step execution loop governed by a Last-In-First-Out (LIFO) stack, giving the agent a form of memory akin to a Pushdown Automaton, therefore enabling it to track nested execution contexts and resume deterministically from any depth. Capability discovery follows a manifest-driven, lazy-loading protocol: only the immediate children of the active node are loaded, so memory and prompt costs scale with the explored path rather than the global registry. By replacing global memory with localized stack frames, the architecture prevents outputs from one execution branch from leaking into another, establishing the isolation guarantees required for deployment in regulated enterprise environments. We also discuss UPI Help, an AI-powered digital payments support product, as a motivating production deployment context. We provide a mathematical formalization of the orchestration state, detailed algorithmic analysis of the execution loop, and controlled benchmarks comparing flat and hierarchical routing under increasing tool catalogs, multi-step workflow pressure, and visible schema-token exposure per LLM call.

Tool-augmented LLMs are increasingly deployed as agents that interleave natural-language reasoning with executable Python actions, as in CodeAct-style frameworks. In deployment, these agents rely on runtime state that persists across steps. By contrast, common training pipelines treat agent traces as token sequences, with execution semantics left implicit. This raises a data-centric question: Is state persistence merely an inference-time scaffold, or can models learn to exploit it when training data exposes the corresponding execution semantics? We isolate state persistence as a training-time variable. We introduce Opaque Knapsack, a procedurally generated family of partially observable optimization tasks designed to prevent one-shot solutions. Item attributes and constraints are hidden behind budgeted tool calls, forcing multi-turn control flow and iterative state revision. Holding task instances, prompts, tools, model, and supervision fixed, we generate paired trajectories differing only in whether interpreter state persists across steps or resets after each action. We then fine-tune identical base models (Qwen3-8B) on each trace variant and evaluate all four train-runtime combinations. Our 2x2 cross-evaluation shows that execution semantics primarily affect how agents reach solutions, not whether they do: solution quality is statistically indistinguishable across conditions, but token cost and stability differ substantially. A persistent-trained model in a stateless runtime triggers missing-variable errors in roughly 80% of episodes; a stateless-trained model in a persistent runtime redundantly re-derives retained state, using roughly 3.5x more tokens. Interpreter persistence should be treated as a first-class semantic of agent traces. Aligning fine-tuning data with deployment runtimes improves efficiency and reduces brittle train-runtime mismatches.

Large Language Models (LLMs) are widely adopted for assisting in software development tasks, yet their performance evaluations have narrowly focused on the functional correctness of generated code. Human programmers, however, require LLM-generated code to be not only correct but also optimally efficient. We propose PerfCodeGen, a training-free framework that enhances the performance of LLM-generated code by incorporating feedback based on runtime during test case execution into the self-refinement iterations. With PerfCodeGen, we achieve speedups for a significantly higher proportion of problems compared to using the base LLM with sophisticated prompting techniques. Applied to open language models like Phi-3-mini, PerfCodeGen achieves runtime efficiency comparable to prompting powerful closed models like GPT-4. We achieve state-of-the-art runtime efficiency on benchmarks such as HumanEval, MBPP, and APPS, frequently surpassing the ground truth reference solutions with PerfCodeGen using GPT-3.5 and GPT-4. Additionally, we demonstrate the effectiveness of our approach in enhancing code quality across a range of open LLMs of varying sizes including Phi-3-mini, Llama 3 8B, Mixtral 8x7B, Command R, and Llama 3 70B.

This is an implementation and measurement study of what it costs to run a streaming speech enhancer on a CPU. We port FastEnhancer-Medium at 48 kHz to faster-enhancer.c, a C runtime with six int8 GEMM tiers selected at initialization, leaving architecture and weights untouched. One Apple M2 core reaches 0.069 real-time factor, against 0.230 for the fp32 ONNX Runtime graph on the same machine, a 3.3x speedup. A Galaxy S23+ (Snapdragon 8 Gen 2) reaches 0.096. The speedup comes from specializing every layer of the runtime around one fixed model. Activation ranges are recomputed per frame, so no calibration set is needed; the k=3 convolutions use Winograd F(2,3); cross-stage state is fp16; the GRU and the dequantization epilogues are fused; and nothing is allocated after startup. Over 824 VoiceBank-DEMAND utterances the engine tracks fp32 to within -0.006 PESQ and -0.08 dB SNR. Speed alone does not settle deployment cost. The enhancer holds a fraction of a core for as long as the microphone is open, so its real-time factor is a duty cycle. A benchmark races through a file; an audio callback does not. Pacing to the 6.67 ms deadline costs 4.2x per frame, saves 49% of the energy, and leaves the cheapest core placement missing 96% of its deadlines. All SIMD tiers within an architecture family emit byte-identical output. The runtime is released as a dependency-free library.

An essential control of AI agents is their ability to manage runtime. This ability requires a sense of time-awareness, to predict and estimate wall-clock time and to control their own actions. Prior work has focused on time-awareness, but duration-following and control in native agent harnesses remain unexplored. We present AgentTime, a benchmark for testing whether agents can work for a requested duration, predict their runtime, and estimate elapsed time afterward. It comprises 222 tasks from 18 sources spanning coding, computer use, agentic work, and automated research. Duration-following experiments append a single instruction specifying how long to work, with requests ranging from about a minute to multiple days. Accuracy on these instructions varies substantially: Fable 5.1 in Claude Code deviates from requested runtimes by a typical factor of 2.9times, compared with only 1.2times for GPT-6 Astra in Codex. However, matching the requested runtime does not, by itself, establish continued work on the task. Among 158 reviewed Astra runs with classifiable transcripts, 14 explicitly slept after appearing to finish. In forecasting experiments, predictions tend to overestimate natural runtimes. In retrospective experiments, removing temporal information more than doubles deviation for Sol and Astra and nearly doubles it for Fable. An agent's ability to complete a task does not guarantee that it can control its own time or work for the whole requested duration. For agents to run reliably, safely, and autonomously over long horizons, we require the evaluation of both.

Large language models (LLMs) power many state-of-the-art systems in natural language processing. However, these models are extremely computationally expensive, even at inference time, raising the natural question: when is the extra cost of deploying a larger model worth the anticipated boost in capabilities? Better understanding this tradeoff fundamentally could benefit from an inference efficiency metric that is both (i) easily comparable across models from different providers, and (ii) representative of the true cost of running queries in an isolated performance environment. Unfortunately, access to LLMs today is largely restricted to black-box text generation APIs and raw runtimes measured through this interface do not satisfy these desiderata: model providers can apply various software and hardware optimizations orthogonal to the model, and models served on shared infrastructure are susceptible to performance contention. To circumvent these problems, we propose a new metric for comparing inference efficiency across models. This metric puts models on equal footing as though they were served (i) on uniform hardware and software, and (ii) without performance contention. We call this metric the idealized runtime, and we propose a methodology to efficiently estimate this metric for autoregressive Transformer models. We also propose cost-aware variants that incorporate the number of accelerators needed to serve the model. Using these metrics, we compare ten state-of-the-art LLMs to provide the first analysis of inference efficiency-capability tradeoffs; we make several observations from this analysis, including the fact that the superior inference runtime performance of certain APIs is often a byproduct of optimizations within the API rather than the underlying model. Our methodology also facilitates the efficient comparison of different software and hardware stacks.

Open-ended scientific discovery often requires repeatedly proposing and evaluating candidate solutions. LLM-based systems can support this process by generating and refining executable solutions from verifier feedback. Methods such as TTT-Discover use test-time training (TTT) to update the solution-generating LLM from verifier feedback, adapting its generation policy to improve subsequent proposals on the target problem. However, this becomes expensive when reliable execution requires a large model, since training must maintain gradients, optimizer states, and policy statistics while repeatedly generating long, structured outputs. It also complicates credit assignment: outcome-level verifier feedback must jointly evaluate the high-level strategy and its low-level implementation. In this work, we introduce Guidance-TTT, which separates these roles. A compact guidance model is trained at test time to propose high-level strategic changes, while a frozen execution model implements them as complete executable solutions. At each step, the system selects a promising previously discovered solution, proposes a change, executes and verifies it, and updates only the guidance model using an adaptive group-relative RL objective. This concentrates test-time learning on short strategic decisions while retaining the implementation capability of a substantially stronger model without adapting it. Without web access, Guidance-TTT produces strong solutions across four distinct domains: combinatorial optimization (Polyomino Packing), heuristic programming (AHC058), machine learning (Lasso), and GPU kernel optimization (TriMul). Across these tasks, it outperforms the best solutions reported in prior work while remaining competitive with state-of-the-art results on public online leaderboards. Code is available at https://github.com/Human-Agent-Society/reef/tree/guidance-ttt-support.

Large language models (LLMs) are leading significant progress in code generation. Beyond one-pass code generation, recent works further integrate unit tests and program verifiers into LLMs to iteratively refine the generated programs. However, these works consider the generated programs as an indivisible entity, which falls short for LLMs in debugging the programs, especially when the programs contain complex logic flows and data operations. In contrast, when human developers debug programs, they typically set breakpoints and selectively examine runtime execution information. The execution flow and the intermediate variables play a crucial role in the debugging process, yet they are underutilized in the existing literature on code generation. In this study, we introduce Large Language Model Debugger (LDB), a novel debugging framework that enables LLMs to refine their generated programs with the runtime execution information. Specifically, LDB segments the programs into basic blocks and tracks the values of intermediate variables after each block throughout the runtime execution. This allows LLMs to concentrate on simpler code units within the overall execution flow, verify their correctness against the task description block by block, and efficiently pinpoint any potential errors. Experiments demonstrate that LDB consistently enhances the baseline performance by up to 9.8% across the HumanEval, MBPP, and TransCoder benchmarks, archiving new state-of-the-art performance in code debugging for various LLM selections.

When trying to solve a computational problem, we are often faced with a choice between algorithms that are guaranteed to return the right answer but differ in their runtime distributions (e.g., SAT solvers, sorting algorithms). This paper aims to lay theoretical foundations for such choices by formalizing preferences over runtime distributions. It might seem that we should simply prefer the algorithm that minimizes expected runtime. However, such preferences would be driven by exactly how slow our algorithm is on bad inputs, whereas in practice we are typically willing to cut off occasional, sufficiently long runs before they finish. We propose a principled alternative, taking a utility-theoretic approach to characterize the scoring functions that describe preferences over algorithms. These functions depend on the way our value for solving our problem decreases with time and on the distribution from which captimes are drawn. We describe examples of realistic utility functions and show how to leverage a maximum-entropy approach for modeling underspecified captime distributions. Finally, we show how to efficiently estimate an algorithm's expected utility from runtime samples.

We deployed an LLM agent with ReAct reasoning and full data access. It executed flawlessly, yet when asked "Why is completion rate 80%?", it returned metrics instead of causal explanation. The agent knew how to reason but we had not specified what to reason about. This reflects a gap: runtime reasoning frameworks (ReAct, Chain-of-Thought) have transformed LLM agents, but design-time specification--determining what domain knowledge agents need--remains under-explored. We propose 4D-ARE (4-Dimensional Attribution-Driven Agent Requirements Engineering), a preliminary methodology for specifying attribution-driven agents. The core insight: decision-makers seek attribution, not answers. Attribution concerns organize into four dimensions (Results -> Process -> Support -> Long-term), motivated by Pearl's causal hierarchy. The framework operationalizes through five layers producing artifacts that compile directly to system prompts. We demonstrate the methodology through an industrial pilot deployment in financial services. 4D-ARE addresses what agents should reason about, complementing runtime frameworks that address how. We hypothesize systematic specification amplifies the power of these foundational advances. This paper presents a methodological proposal with preliminary industrial validation; rigorous empirical evaluation is planned for future work.

Graph and multi-agent orchestration frameworks make production large language model (LLM) workflows practical, but they do not by themselves solve conversational continuity when users maintain several interdependent objectives. This conceptual systems paper focuses on the high-complexity end of that design space, where goals can be suspended, resumed, revised, and invalidated by actions in other goals. We introduce the Goal-Oriented Dialogue Runtime (GODR), a framework-neutral design pattern that treats goals, task frames, lifecycle state, invalidation rules, and resumption contracts as first-class runtime objects while delegating bounded execution to graph runtimes, agents, tools, or application programming interfaces (APIs). GODR is not proposed as a replacement for workflow graphs in simple guided processes; it is intended for complex, multi-domain, interruptible conversations where objective continuity cannot be recovered reliably from agent identity, chat history, or execution-graph position alone. The paper formalizes the problem, proposes runtime objects and architecture-selection criteria, and frames evaluation as an agenda for future empirical validation rather than as a measured performance claim.

Learning effective numerical representations, or embeddings, of programs is a fundamental prerequisite for applying machine learning to automate and enhance compiler optimization. Prevailing paradigms, however, present a dilemma. Static representations, derived from source code or intermediate representation (IR), are efficient and deterministic but offer limited insight into how a program will behave or evolve under complex code transformations. Conversely, dynamic representations, which rely on runtime profiling, provide profound insights into performance bottlenecks but are often impractical for large-scale tasks due to prohibitive overhead and inherent non-determinism. This paper transcends this trade-off by proposing a novel quasi-dynamic framework for program representation. The core insight is to model a program's optimization sensitivity. We introduce the Program Behavior Spectrum, a new representation generated by probing a program's IR with a diverse set of optimization sequences and quantifying the resulting changes in its static features. To effectively encode this high-dimensional, continuous spectrum, we pioneer a compositional learning approach. Product Quantization is employed to discretize the continuous reaction vectors into structured, compositional sub-words. Subsequently, a multi-task Transformer model, termed PQ-BERT, is pre-trained to learn the deep contextual grammar of these behavioral codes. Comprehensive experiments on two representative compiler optimization tasks -- Best Pass Prediction and -Oz Benefit Prediction -- demonstrate that our method outperforms state-of-the-art static baselines. Our code is publicly available at https://github.com/Panhaolin2001/PREP/.

Tool-augmented LLM agents raise new security risks: tool executions can introduce runtime-only behaviors, including prompt injection and unintended exposure of external inputs (e.g., environment secrets or local files). While existing scanners often focus on static artifacts, analyzing runtime behavior is challenging because directly executing untrusted tools can itself be dangerous. We present MCP-SandboxScan, a lightweight framework motivated by the Model Context Protocol (MCP) that safely executes untrusted tools inside a WebAssembly/WASI sandbox and produces auditable reports of external-to-sink exposures. Our prototype (i) extracts LLM-relevant sinks from runtime outputs (prompt/messages and structured tool-return fields), (ii) instantiates external-input candidates from environment values, mounted file contents, and output-surfaced HTTP fetch intents, and (iii) links sources to sinks via snippet-based substring matching. Case studies on three representative tools show that MCP-SandboxScan can surface provenance evidence when external inputs appear in prompt/messages or tool-return payloads, and can expose filesystem capability violations as runtime evidence. We further compare against a lightweight static string-signature baseline and use a micro-benchmark to characterize false negatives under transformations and false positives from short-token collisions.

Long-horizon agents can fail even when their underlying models can solve the constituent steps. They may lose track of mutable state, fail to reactivate lessons from earlier executions, skip known procedures, or stop prematurely. We bet on harness scaling to improve the execution system around an agent without changing its model weights. We introduce StateM, an agent-native runtime that organizes execution around durable states, phase-local context, checked transitions, recoverable runbooks, and versioned procedural practices that agents and users can inspect together. On Terminal-Bench 2.1, StateM raises GPT-5.5 xhigh to 92.1\%, versus 83.1\% reference and GPT-5.6 Sol Ultra at 91.9\%. The runbook transfers unchanged to GPT-5.6. With GPT-5.6 Sol xhigh, StateM reaches 95.3\% raw accuracy across 445 trials and succeeds on all 89 tasks at least once. The frozen profile raises GPT-5.6 Luna from 76.7 to 85.4\%, above the 84.9\% Sol xhigh reference. Using the same runtime, runbook structure, and golden rules, less than \38 of adaptation raises DeepSeek-V4 Flash from 82.7 to 88.1% under standard timeouts and to 89.1% on an 88-task common core. Extending only the remaining latency-sensitive task matches the reported 88.8% GPT-5.6 Sol max result. Final-score API usage is about 15 versus \574.68 for the GPT reference; total DeepSeek expenditure is 52.22. On BusinessBench, family-specific runbooks built on development sets yield held-out gains of 0.55 macro and 1.34 micro points; two mechanism-matched families improve by 10.04 points. Concrete rules generalize when tasks share execution structure, while the control methodology applies broadly. StateM turns selected postmortem findings into persistent, executable preconditions and practices, making learned controls explicit and enforceable through stateful controls. Code at github.com/henryqin1997/statem.

We present a novel approach to neural code generation that incorporates real-time execution signals into the language model generation process. While large language models (LLMs) have demonstrated impressive code generation capabilities, they typically do not utilize execution feedback during inference, a critical signal that human programmers regularly leverage. Our method, Execution-Guided Classifier-Free Guidance (EG-CFG), dynamically incorporates execution signals as the model generates code, providing line-by-line feedback that guides the generation process toward executable solutions. EG-CFG employs a multi-stage process: first, we conduct beam search to sample candidate program completions for each line; second, we extract execution signals by executing these candidates against test cases; and finally, we incorporate these signals into the prompt during generation. By maintaining consistent signals across tokens within the same line and refreshing signals at line boundaries, our approach provides coherent guidance while preserving syntactic structure. Moreover, the method naturally supports native parallelism at the task level in which multiple agents operate in parallel, exploring diverse reasoning paths and collectively generating a broad set of candidate solutions. Our experiments across diverse coding tasks demonstrate that EG-CFG significantly improves code generation performance compared to standard approaches, achieving state-of-the-art results across various levels of complexity, from foundational problems to challenging competitive programming and data science tasks. Our code is available at: https://github.com/boazlavon/eg_cfg

LLM agents increasingly act by writing code, yet a split persists between the runtime that drives the agent and the code the model writes. The runtime owns the loop, context, and control flow, and the model has little say over any of them. Letting model-written code shape the runtime itself would make agents more expressive, but it would also sharpen safety problems. A model can be diverted by a prompt injection, call the wrong tool, or fail partway and leave an inconsistent state, and each such failure reaches further when the code shapes the runtime than when it expresses a single action. We present LACUNA, a programming model for agents that closes this split while preserving safety. Each agent action is a typed call agent[T](task) that the LLM fills with code when execution reaches it, and the code is type-checked against the surrounding program before it runs. Because each action is accepted or rejected as a whole, a rejected one leaves the environment untouched, and its compiler diagnostics drive a retry. The same check also bounds which tools and data an action may use and how they flow. Our primitive expresses ReAct loops, sub-agents, skills, parallel decomposition, and multi-model planning as ordinary control flow. We evaluate LACUNA on a collection of test cases, BrowseComp-Plus, and τ^2-bench. On BrowseComp-Plus, 8.6% of generations are rejected before execution, with 0.7 retries per query on average, and the agent reaches 27.1% accuracy. On τ^2-bench, LACUNA solves 76.0% of 392 tasks across four domains with a capable model, on par with the baseline agent.

Large Language Models (LLMs) are nowadays extensively used for various types of software engineering tasks, primarily code generation. Previous research has shown how suitable prompt engineering could help developers in improving their code generation prompts. However, so far, there do not exist specific guidelines driving developers towards writing suitable prompts for code generation. In this work, we derive and evaluate development-specific prompt optimization guidelines. First, we use an iterative, test-driven approach to automatically refine code generation prompts, and we analyze the outcome of this process to identify prompt improvement items that lead to test passes. We use such elements to elicit 10 guidelines for prompt improvement, related to better specifying I/O, pre-post conditions, providing examples, various types of details, or clarifying ambiguities. We conduct an assessment with 50 practitioners, who report their usage of the elicited prompt improvement patterns, as well as their perceived usefulness, which does not always correspond to the actual usage before knowing our guidelines. Our results lead to implications not only for practitioners and educators, but also for those aimed at creating better LLM-aided software development tools.

Recent research has demonstrated that Large Language Models (LLMs) can enhance their capabilities by utilizing external tools. However, three pivotal questions remain unanswered: (1) How effective are current LLMs in utilizing tools? (2) How can we enhance LLMs' ability to utilize tools? (3) What obstacles need to be overcome to leverage tools? To address these questions, we introduce API-Bank, a groundbreaking benchmark, specifically designed for tool-augmented LLMs. For the first question, we develop a runnable evaluation system consisting of 73 API tools. We annotate 314 tool-use dialogues with 753 API calls to assess the existing LLMs' capabilities in planning, retrieving, and calling APIs. For the second question, we construct a comprehensive training set containing 1,888 tool-use dialogues from 2,138 APIs spanning 1,000 distinct domains. Using this dataset, we train Lynx, a tool-augmented LLM initialized from Alpaca. Experimental results demonstrate that GPT-3.5 exhibits improved tool utilization compared to GPT-3, while GPT-4 excels in planning. However, there is still significant potential for further improvement. Moreover, Lynx surpasses Alpaca's tool utilization performance by more than 26 pts and approaches the effectiveness of GPT-3.5. Through error analysis, we highlight the key challenges for future research in this field to answer the third question.

It is a common belief that large language models (LLMs) are better than smaller-sized ones. However, larger models also require significantly more time and compute during inference. This begs the question: what happens when both models operate under the same budget? (e.g., compute, run-time). To address this question, we analyze code generation LLMs of various sizes and make comparisons such as running a 70B model once vs. generating five outputs from a 13B model. We consider a standard unit-test setup, which can be used to select the correct output from the smaller model. Our findings reveal that the repeated use of smaller models can yield consistent improvements, with gains of up to 15% across five tasks. On the other hand, in scenarios where unit-tests are unavailable, a ranking-based selection of candidates from the smaller model falls short of the performance of a single output from larger ones. Our results highlight the potential of using smaller models instead of larger ones, and the importance of studying approaches for ranking LLM outputs.

Agent Skills package reusable instructions and assets for tool-using language-model agents. Progressive loading creates failure boundaries poorly represented by session-, model-, or tool-centric traces: a Skill can be discovered but not activated, activated without instructions, or appear successful without an independently verified outcome. We present Skill Runtime Intelligence, a passive runtime-intelligence system that reconstructs supported Skill-lifecycle stages across heterogeneous harnesses while preserving unsupported stages as unknown. Its Run Panorama separates immutable events, deterministic relations, inferred diagnoses, and controlled outcomes with four evidence grades; optional trace import and OTLP/HTTP export support existing observability deployments. Across six frozen repository profiles, three coding agents, and seven clean or fault-injected conditions, all 126 executions preserve source worktrees and each correlates to exactly one source session. Yet adapters expose three distinct semantics: no Skill runs; complete runs but no failure-like events; or failure-like events in every operational-failure and clean session. In a seven-template diagnostic study, semantic aliases and Panorama localize the same six non-clean boundaries but differ in exact/status behavior; both Raw views emit a failure status on all 18 clean cases, while Panorama emits none. A known-rule graph conforms to 126/126 frozen contracts, whereas a second model completes only 228/378 calls. These observations motivate executable adapter qualification and show that event presence is not boundary fidelity, composite exact scores mask distinct errors, and model explanations must not overwrite deterministic facts.

Large Language Models (LLMs) have transformed code auto-completion by generating context-aware suggestions. Yet, deciding when to present these suggestions remains underexplored, often leading to interruptions or wasted inference calls. We propose an adaptive timing mechanism that dynamically adjusts the delay before offering a suggestion based on real-time developer feedback. Our suggested method combines a logistic transform of recent acceptance rates with a bounded delay range, anchored by a high-level binary prediction of the developer's cognitive state. In a two-month deployment with professional developers, our system improved suggestion acceptance from 4.9% with no delay to 15.4% with static delays, and to 18.6% with adaptive timing-while reducing blind rejections (rejections without being read) from 8.3% to 0.36%. Together, these improvements increase acceptance and substantially reduce wasted inference calls by 75%, making LLM-based code assistants more efficient and cost-effective in practice.

LLM-based agents are increasingly capable of complex task execution, yet current agentic systems remain constrained by text-centric paradigms. Traditional approaches rely on procedural JSON-based function calling, which often struggles with long-horizon tasks due to fragile multi-turn dependencies and context drift. In this paper, we present CaveAgent, a framework that transforms the paradigm from "LLM-as-Text-Generator" to "LLM-as-Runtime-Operator." We introduce a Dual-stream Context Architecture that decouples state management into a lightweight semantic stream for reasoning and a persistent, deterministic Python Runtime stream for execution. In addition to leveraging code generation to efficiently resolve interdependent sub-tasks (e.g., loops, conditionals) in a single step, we introduce Stateful Runtime Management in CaveAgent. Distinct from existing code-based approaches that remain text-bound and lack the support for external object injection and retrieval, CaveAgent injects, manipulates, and retrieves complex Python objects (e.g., DataFrames, database connections) that persist across turns. This persistence mechanism acts as a high-fidelity external memory to eliminate context drift, avoid catastrophic forgetting, while ensuring that processed data flows losslessly to downstream applications. Comprehensive evaluations on Tau^2-bench, BFCL and various case studies across representative SOTA LLMs demonstrate CaveAgent's superiority. Specifically, our framework achieves a 10.5\% success rate improvement on retail tasks and reduces total token consumption by 28.4\% in multi-turn scenarios. On data-intensive tasks, direct variable storage and retrieval reduces token consumption by 59\%, allowing CaveAgent to handle large-scale data that causes context overflow failures in both JSON-based and Code-based agents.

With the increasing use of neural policies in control systems, ensuring their safety and reliability has become a critical software engineering task. One prevalent approach to ensuring the safety of neural policies is to deploy programmatic runtime shields alongside them to correct their unsafe commands. However, the programmatic runtime shields synthesized by existing methods are either computationally expensive or insufficiently permissive, resulting in high overhead and unnecessary interventions on the system. To address these challenges, we propose Aegis, a novel framework that synthesizes lightweight and permissive programmatic runtime shields for neural policies. Aegis achieves this by formulating the seeking of a runtime shield as a sketch-based program synthesis problem and proposing a novel method that leverages counterexample-guided inductive synthesis and Bayesian optimization to solve it. To evaluate Aegis and its synthesized shields, we use eight representative control systems and compare Aegis with the current state-of-the-art. Our results show that the programmatic runtime shields synthesized by Aegis can correct all unsafe commands from neural policies, ensuring that the systems do not violate any desired safety properties at all times. Compared to the current state-of-the-art, Aegis's shields exhibit a 2.2times reduction in time overhead and a 3.9times reduction in memory usage, suggesting that they are much more lightweight. Moreover, Aegis's shields incur an average of 1.5times fewer interventions than other shields, showing better permissiveness.

LLM agents have become a new class of software user, but every surface they work through was designed for someone else. Pages are built for human eyes, which can skim and ignore; tool schemas for programs, which pay nothing to carry definitions they never call. An agent has neither luxury: it re-reads, and pays again for, everything it is shown on every turn. We present String, an open-source runtime that gives this user an interface of its own and treats the job as an operating-systems problem. Tool knowledge moves out of the agent's context and into a common layer that renders it back one view at a time as Markdown. A single SFMD (String-Flavored Markdown) document declares an application's views, typed actions, navigation, and credentials, and the runtime handles discovery, validation, execution, state, and secrets behind two core verbs: /open to see and /act to do. Web and app turn out to be two renderings of one architecture: an SFMD site serves styled HTML to browsers and the raw document to agents, so one grammar reaches apps, files, shells, and the web, even legacy HTML, with no per-site integration. Views stay partial by design, and the staging is causal: disclosing one tier of detail a single turn too early costs up to 23 accuracy points, while proper staging drops wrong-action selection from 28% to 2%. Privilege follows provenance: a remote page may call HTTP but never the shell, and caller-supplied text never expands a stored secret. On an 87-task benchmark that pairs each task with curated skills, operationalizing those procedures as on-demand String apps yields comparable aggregate success across six models from frontier to small (+1.3pp) while using 33.5% fewer tokens among completed episodes, and the resident interface stays a constant 53 tokens at any catalog size. We report the design, the evaluation, and what three months of production use taught us.

Large Language Models (LLMs) have shown remarkable capabilities in solving various programming tasks, such as code generation. However, their potential for code optimization, particularly in performance enhancement, remains largely unexplored. This paper investigates the capabilities of LLMs in optimizing code for minimal execution time, addressing a critical gap in current research. The recently proposed code optimization methods construct program optimization pairs based on iterative submissions from the same programmer for the same problem. However, this approach confines LLMs to local performance improvements, neglecting global algorithmic innovation. To overcome this limitation, we adopt a completely different perspective by reconstructing the optimization pairs into a problem-oriented approach. This allows for the integration of various ideas from multiple programmers tackling the same problem. Furthermore, we observe that code optimization presents greater challenges compared to code generation, often accompanied by "optimization tax". Recognizing the inherent trade-offs in correctness and efficiency, we introduce a novel anchor verification framework to mitigate this "optimization tax". Ultimately, the problem oriented perspective combined with the anchor verification framework significantly enhances both the correct optimization ratio and speedup to new levels.

Diffusion models have emerged as a formidable tool for training-free conditional generation.However, a key hurdle in inference-time guidance techniques is the need for compute-heavy backpropagation through the diffusion network for estimating the guidance direction. Moreover, these techniques often require handcrafted parameter tuning on a case-by-case basis. Although some recent works have introduced minimal compute methods for linear inverse problems, a generic lightweight guidance solution to both linear and non-linear guidance problems is still missing. To this end, we propose Dreamguider, a method that enables inference-time guidance without compute-heavy backpropagation through the diffusion network. The key idea is to regulate the gradient flow through a time-varying factor. Moreover, we propose an empirical guidance scale that works for a wide variety of tasks, hence removing the need for handcrafted parameter tuning. We further introduce an effective lightweight augmentation strategy that significantly boosts the performance during inference-time guidance. We present experiments using Dreamguider on multiple tasks across multiple datasets and models to show the effectiveness of the proposed modules. To facilitate further research, we will make the code public after the review process.

Large language model (LLM) agents are evolving from request-response assistants into long-running software actors: they maintain state across model calls, fork subtasks, wait for external events, request human authority, generate tools, and perform side effects that must be resumed and audited. This paper presents Agent libOS, a library-OS-inspired runtime substrate for LLM agents. Agent libOS runs above a conventional host operating system; it does not implement hardware drivers, kernel-mode isolation, or a POSIX-compatible operating system. Instead, it treats an agent as an AgentProcess: a schedulable execution subject with process identity, parent-child lineage, lifecycle state, a tool table derived from an AgentImage, typed Object Memory, explicit capabilities, human queues, checkpoints, events, and audit records. Its central design rule is tools are libc-like wrappers; runtime primitives are the authority boundary. Filesystem access, object access, sleeps, human approval, JIT tool registration, and external side effects are checked at primitive boundaries under explicit capabilities and policy. We describe the design, threat model, Python prototype, and safety-oriented evaluation. The current prototype implements async scheduling, namespace-local Object Memory, runtime-integrated human approval, one-shot permission grants, per-process working directories, shell and image-registration primitives, Deno/TypeScript JIT tools over a libOS syscall broker, filesystem/object bridge tools, an injectable Resource Provider Substrate, deterministic demos, real-model smoke scripts, and 123 regression tests at the time of writing. Rather than improving planner accuracy, Agent libOS demonstrates a runtime substrate in which long-running LLM agents can be scheduled, authorized, resumed, and audited without treating tool dispatch as the trust boundary.

Developing high-performance software is a complex task that requires specialized expertise. We introduce GSO, a benchmark for evaluating language models' capabilities in developing high-performance software. We develop an automated pipeline that generates and executes performance tests to analyze repository commit histories to identify 102 challenging optimization tasks across 10 codebases, spanning diverse domains and programming languages. An agent is provided with a codebase and performance test as a precise specification, and tasked to improve the runtime efficiency, which is measured against the expert developer optimization. Our quantitative evaluation reveals that leading SWE-Agents struggle significantly, achieving less than 5% success rate, with limited improvements even with inference-time scaling. Our qualitative analysis identifies key failure modes, including difficulties with low-level languages, practicing lazy optimization strategies, and challenges in accurately localizing bottlenecks. We release the code and artifacts of our benchmark along with agent trajectories to enable future research.

Large language model (LLM)-based systems are becoming increasingly popular for solving tasks by constructing executable workflows that interleave LLM calls, information retrieval, tool use, code execution, memory updates, and verification. This survey reviews recent methods for designing and optimizing such workflows, which we treat as agentic computation graphs (ACGs). We organize the literature based on when workflow structure is determined, where structure refers to which components or agents are present, how they depend on each other, and how information flows between them. This lens distinguishes static methods, which fix a reusable workflow scaffold before deployment, from dynamic methods, which select, generate, or revise the workflow for a particular run before or during execution. We further organize prior work along three dimensions: when structure is determined, what part of the workflow is optimized, and which evaluation signals guide optimization (e.g., task metrics, verifier signals, preferences, or trace-derived feedback). We also distinguish reusable workflow templates, run-specific realized graphs, and execution traces, separating reusable design choices from the structures actually deployed in a given run and from realized runtime behavior. Finally, we outline a structure-aware evaluation perspective that complements downstream task metrics with graph-level properties, execution cost, robustness, and structural variation across inputs. Our goal is to provide a clear vocabulary, a unified framework for positioning new methods, a more comparable view of existing body of literature, and a more reproducible evaluation standard for future work in workflow optimizations for LLM agents.

Code generation has largely improved development efficiency in the era of large language models (LLMs). With the ability to follow instructions, current LLMs can be prompted to generate code solutions given detailed descriptions in natural language. Many research efforts are being devoted to improving the correctness of LLM-generated code, and many benchmarks are proposed to evaluate the correctness comprehensively. Despite the focus on correctness, the time efficiency of LLM-generated code solutions is under-explored. Current correctness benchmarks are not suitable for time efficiency evaluation since their test cases cannot well distinguish the time efficiency of different code solutions. Besides, the current execution time measurement is not stable and comprehensive, threatening the validity of the time efficiency evaluation. To address the challenges in the time efficiency evaluation of code generation, we propose COFFE, a code generation benchmark for evaluating the time efficiency of LLM-generated code solutions. COFFE contains 398 and 358 problems for function-level and file-level code generation, respectively. To improve the distinguishability, we design a novel stressful test case generation approach with contracts and two new formats of test cases to improve the accuracy of generation. For the time evaluation metric, we propose efficienct@k based on CPU instruction count to ensure a stable and solid comparison between different solutions. We evaluate 14 popular LLMs on COFFE and identify four findings. Based on the findings, we draw some implications for LLM researchers and software practitioners to facilitate future research and usage of LLMs in code generation.

In online algorithm selection (OAS), instances of an algorithmic problem class are presented to an agent one after another, and the agent has to quickly select a presumably best algorithm from a fixed set of candidate algorithms. For decision problems such as satisfiability (SAT), quality typically refers to the algorithm's runtime. As the latter is known to exhibit a heavy-tail distribution, an algorithm is normally stopped when exceeding a predefined upper time limit. As a consequence, machine learning methods used to optimize an algorithm selection strategy in a data-driven manner need to deal with right-censored samples, a problem that has received little attention in the literature so far. In this work, we revisit multi-armed bandit algorithms for OAS and discuss their capability of dealing with the problem. Moreover, we adapt them towards runtime-oriented losses, allowing for partially censored data while keeping a space- and time-complexity independent of the time horizon. In an extensive experimental evaluation on an adapted version of the ASlib benchmark, we demonstrate that theoretically well-founded methods based on Thompson sampling perform specifically strong and improve in comparison to existing methods.

Code optimization is a daunting task that requires a significant level of expertise from experienced programmers. This level of expertise is not sufficient when compared to the rapid development of new hardware architectures. Towards advancing the whole code optimization process, recent approaches rely on machine learning and artificial intelligence techniques. This paper introduces a new framework to decrease the complexity of code optimization. The proposed framework builds on large language models (LLMs) and reinforcement learning (RL) and enables LLMs to receive feedback from their environment (i.e., unit tests) during the fine-tuning process. We compare our framework with existing state-of-the-art models and show that it is more efficient with respect to speed and computational usage, as a result of the decrement in training steps and its applicability to models with fewer parameters. Additionally, our framework reduces the possibility of logical and syntactical errors. Toward evaluating our approach, we run several experiments on the PIE dataset using a CodeT5 language model and RRHF, a new reinforcement learning algorithm. We adopt a variety of evaluation metrics with regards to optimization quality, and speedup. The evaluation results demonstrate that the proposed framework has similar results in comparison with existing models using shorter training times and smaller pre-trained models. In particular, we accomplish an increase of 5.6% and 2.2 over the baseline models concerning the %OP T and SP metrics.

A fundamental skill among human developers is the ability to understand and reason about program execution. As an example, a programmer can mentally simulate code execution in natural language to debug and repair code (aka. rubber duck debugging). However, large language models (LLMs) of code are typically trained on the surface textual form of programs, thus may lack a semantic understanding of how programs execute at run-time. To address this issue, we propose NExT, a method to teach LLMs to inspect the execution traces of programs (variable states of executed lines) and reason about their run-time behavior through chain-of-thought (CoT) rationales. Specifically, NExT uses self-training to bootstrap a synthetic training set of execution-aware rationales that lead to correct task solutions (e.g., fixed programs) without laborious manual annotation. Experiments on program repair tasks based on MBPP and HumanEval demonstrate that NExT improves the fix rate of a PaLM 2 model, by 26.1% and 14.3% absolute, respectively, with significantly improved rationale quality as verified by automated metrics and human raters. Our model can also generalize to scenarios where program traces are absent at test-time.

Production LLM agents often waste latency and reliability by regenerating code for the same procedural steps on every request. We replace this inference-time coding loop with an agentic tool-making pipeline that compiles repeated SOP steps into validated, versioned tools before deployment. The tool-maker grounds synthesis in the live environment as it collects execution traces, observes backend schemas and values, generates candidate tools, and repairs them against labeled cases. At runtime, the production agent calls these tools directly and falls back to code generation only when needed. We deploy the approach in a Fulfillment Center alarm-triage system, where an agent diagnoses alarms against a 44-node SOP over heterogeneous metric backends. In production, tool calls reduce p50 latency by 42%. On 1,500 historical alarms, they reduce end-to-end error rate by up to 53% by suppressing run-to-run variance in repeated steps. Because tools return compact structured verdicts, they also enable a simpler direct-call architecture, reducing p50 latency by a further 62% in a controlled ablation. Versioned tools also improve auditability and expose specification gaps and upstream data drift. Our results show that self-evolving agents can make industrial LLM systems faster, more reliable, and easier to operate.

Scripting interfaces enable users to automate tasks and customize software workflows, but creating scripts traditionally requires programming expertise and familiarity with specific APIs, posing barriers for many users. While Large Language Models (LLMs) can generate code from natural language queries, runtime code generation is severely limited due to unverified code, security risks, longer response times, and higher computational costs. To bridge the gap, we propose an offline simulation framework to curate a software-specific skillset, a collection of verified scripts, by exploiting LLMs and publicly available scripting guides. Our framework comprises two components: (1) task creation, using top-down functionality guidance and bottom-up API synergy exploration to generate helpful tasks; and (2) skill generation with trials, refining and validating scripts based on execution feedback. To efficiently navigate the extensive API landscape, we introduce a Graph Neural Network (GNN)-based link prediction model to capture API synergy, enabling the generation of skills involving underutilized APIs and expanding the skillset's diversity. Experiments with Adobe Illustrator demonstrate that our framework significantly improves automation success rates, reduces response time, and saves runtime token costs compared to traditional runtime code generation. This is the first attempt to use software scripting interfaces as a testbed for LLM-based systems, highlighting the advantages of leveraging execution feedback in a controlled environment and offering valuable insights into aligning AI capabilities with user needs in specialized software domains.

A key strength of managed runtimes over hardware is the ability to gain detailed insight into the dynamic execution of programs with instrumentation. Analyses such as code coverage, execution frequency, tracing, and debugging, are all made easier in a virtual setting. As a portable, low-level bytecode, WebAssembly offers inexpensive in-process sandboxing with high performance. Yet to date, Wasm engines have not offered much insight into executing programs, supporting at best bytecode-level stepping and basic source maps, but no instrumentation capabilities. In this paper, we show the first non-intrusive dynamic instrumentation system for WebAssembly in the open-source Wizard Research Engine. Our innovative design offers a flexible, complete hierarchy of instrumentation primitives that support building high-level, complex analyses in terms of low-level, programmable probes. In contrast to emulation or machine code instrumentation, injecting probes at the bytecode level increases expressiveness and vastly simplifies the implementation by reusing the engine's JIT compiler, interpreter, and deoptimization mechanism rather than building new ones. Wizard supports both dynamic instrumentation insertion and removal while providing consistency guarantees, which is key to composing multiple analyses without interference. We detail a fully-featured implementation in a high-performance multi-tier Wasm engine, show novel optimizations specifically designed to minimize instrumentation overhead, and evaluate performance characteristics under load from various analyses. This design is well-suited for production engine adoption as probes can be implemented to have no impact on production performance when not in use.

RL for code correctness is now established: have the model generate a program, run it against hidden test cases, and reward solutions that pass. Extending this to code optimization seems straightforward: just add execution time to the reward. But in practice, once timing drives the reward, small problems in measurement noise, reward sparsity, or GRPO instability overwhelm the signal and make RL fail: generated solutions are barely faster, and more of them can fail. We make execution time learnable through three stages: (1) how code is tested, by building DMC-Optim with large optimization tests and a calibrated sandbox; (2) how speed is turned into reward, by composing correctness and speed in the RL environment and using an offline simulator to predict the most promising configurations; and (3) how the model learns from that reward, by adapting GRPO and evaluation to the sparser, noisier timed-execution setting. On DMC-Optim, the strongest optimization-aware configurations improve strict top-50% pass@1 from 18.0% to 31.3% on Qwen 2.5 7B and from 30.7% to 50.4% on CWM 32B. These gains further increase at stricter percentiles such as top-30%, with 125% relative improvement for CWM 32B, while preserving pure-correctness scores. When the timing sandbox is degraded, robust optimization RL reaches 100% to 200% improvement over standard RLVR, depending on the evaluation criterion. On LCB, CWM 32B wins up to 83% of median-sample speed comparisons against standard RLVR. Relative to the fastest correct human submissions per problem, it reaches about half the human rate of complexity-class improvements (14% vs. 28%).

Modern agent systems often suffer from fragmented runtime state: transcripts, tool effects, memory events, workspace placement, branch provenance, and replay evidence are recorded separately and become difficult to inspect or reproduce. OpenRath addresses this issue with a PyTorch-like programming model for multi-agent, multi-session systems. The analogy concerns the role of a central first-class runtime abstraction, not tensor computation. Its core abstraction is Session, the runtime value passed between agents and workflows. A Session is branchable, inspectable, replayable, backend-aware, and composable. It records conversation chunks, sandbox placement, lineage metadata, token usage, pending work, and tool evidence, while defining where memory interactions enter the runtime record. Since this state is carried by the same value used in program execution, fork, merge, and replay become explicit runtime operations rather than states reconstructed from external traces. OpenRath further defines Sandbox, Tool, Agent, Memory, Workflow, and Selector, with Selector turning control flow into runtime-routed decisions. This report presents the programming model, architecture, audited milestones, and evidence protocol. Its claims are limited to controlled runtime properties, while broad quantitative comparisons, live-provider quality, optional-backend availability, and memory quality are left for follow-on evaluation. The central thesis is that Session provides agent systems with a first-class runtime value for auditable composition.

Coding agents are increasingly used to build programs from scratch as software engineers do rather than to resolve issues within a repository or to generate a repository from a given requirements document. However, scalable verifiable training environments that force agents to discover what is required and to decide how the system should be designed remain scarce. Moreover, existing agent workflows also cannot sustain long-horizon development in which the agent explores the reference program before implementation. To address these challenges, we introduce ProgramGym, a framework consisting of Program-Env and Program-Agent for scalable training environments of long-horizon program reproduction agents. Specifically, Program-Env constructs verifiable training environments from repositories through a feedback-driven loop that repairs runtime sandbox builds and the quality of black-box tests. Using this novel pipeline, we obtain 1,648 training environments spanning C, C++, Go, and Rust. Program-Agent combines a role-isolated workflow of analysis, implementation, and review with revision management for compilation checks and failure recovery. Experiments on ProgramBench show that both Program-Env and Program-Agent improve performance on program reproduction. Fine-tuning on trajectories with these constructed environments raises the performance of Qwen3.8-27B from 34.87% to 42.84%. Program-Agent further raises the base and SFT models to 55.71% and 56.25%, both exceeding some flagship models. We will release the ProgramGym to support further research on coding agents that build programs from scratch.

We introduce ISO-Bench, a benchmark for coding agents to test their capabilities on real-world inference optimization tasks. These tasks were taken from vLLM and SGLang, two of the most popular LLM serving frameworks. Each task provides an agent with a codebase and bottleneck description, whereby the agent must produce an optimization patch evaluated against expert human solutions. We curated 54 tasks from merged pull requests with measurable performance improvements. While existing benchmarks heavily use runtime-based metrics, such approaches can be gamed to pass tests without capturing the actual intent of the code changes. Therefore, we combine both hard (execution-based) and soft (LLM-based) metrics to show that both are necessary for complete evaluation. While evaluating both closed and open-source coding agents, we find no single agent dominates across codebases. Surprisingly, agents often identify correct bottlenecks but fail to execute working solutions. We also show that agents with identical underlying models differ substantially, suggesting scaffolding is as important as the model.

Optimizing scientific software is a difficult task because codebases are often large and complex, and performance can depend upon several factors including the algorithm, its implementation, and hardware among others. Causes of poor performance can originate from disparate sources and be difficult to diagnose. Recent years have seen a multitude of work that use large language models (LLMs) to assist in software development tasks. However, these tools are trained to model the distribution of code as text, and are not specifically designed to understand performance aspects of code. In this work, we introduce a reinforcement learning based methodology to align the outputs of code LLMs with performance. This allows us to build upon the current code modeling capabilities of LLMs and extend them to generate better performing code. We demonstrate that our fine-tuned model improves the expected speedup of generated code over base models for a set of benchmark tasks from 0.9 to 1.6 for serial code and 1.9 to 4.5 for OpenMP code.

Automatic software system optimization can improve software speed, reduce operating costs, and save energy. Traditional approaches to optimization rely on manual tuning and compiler heuristics, limiting their ability to generalize across diverse codebases and system contexts. Recent methods using Large Language Models (LLMs) offer automation to address these limitations, but often fail to scale to the complexity of real-world software systems and applications. We present SysLLMatic, a system that integrates LLMs with profiling-guided feedback and system performance insights to automatically optimize software code. We evaluate it on three benchmark suites: HumanEval_CPP (competitive programming in C++), SciMark2 (scientific kernels in Java), and DaCapoBench (large-scale software systems in Java). Results show that SysLLMatic can improve system performance, including latency, throughput, energy efficiency, memory usage, and CPU utilization. It consistently outperforms state-of-the-art LLM baselines on microbenchmarks. On large-scale application codes, it surpasses traditional compiler optimizations, achieving average relative improvements of 1.85x in latency and 2.24x in throughput. Our findings demonstrate that LLMs, guided by principled systems thinking and appropriate performance diagnostics, can serve as viable software system optimizers. We further identify limitations of our approach and the challenges involved in handling complex applications. This work provides a foundation for generating optimized code across various languages, benchmarks, and program sizes in a principled manner.

We explore the novel application of Large Language Models to code optimization. We present a 7B-parameter transformer model trained from scratch to optimize LLVM assembly for code size. The model takes as input unoptimized assembly and outputs a list of compiler options to best optimize the program. Crucially, during training, we ask the model to predict the instruction counts before and after optimization, and the optimized code itself. These auxiliary learning tasks significantly improve the optimization performance of the model and improve the model's depth of understanding. We evaluate on a large suite of test programs. Our approach achieves a 3.0% improvement in reducing instruction counts over the compiler, outperforming two state-of-the-art baselines that require thousands of compilations. Furthermore, the model shows surprisingly strong code reasoning abilities, generating compilable code 91% of the time and perfectly emulating the output of the compiler 70% of the time.

While significant progress has been made in automating various aspects of software development through coding agents, there is still significant room for improvement in their bug fixing capabilities. Debugging and investigation of runtime behavior remains largely a manual, developer-driven process. Popular coding agents typically rely on either static analysis of the code or iterative test-fix cycles, which is akin to trial and error debugging. We posit that there is a wealth of rich runtime information that developers routinely access while debugging code, which agents are currently deprived of due to design limitations. Despite how prevalent debuggers are in modern IDEs and command-line tools, they have surprisingly not made their way into coding agents. In this work, we introduce Debug2Fix, a novel framework that incorporates interactive debugging as a core component of a software engineering agent via a subagent architecture. We incorporate debuggers for Java and Python into our agent framework and evaluate against GitBug-Java and SWE-Bench-Live and achieve >20% improvement in performance compared to the baseline for certain models. Furthermore, using our framework, we're able to make weaker models like GPT-5 and Claude Haiku 4.5 match or exceed the performances of stronger models like Claude Sonnet 4.5, showing that better tool design is often just as important as switching to a more expensive model. Finally, we conduct systematic ablations demonstrating the importance of both the subagent architecture and debugger integration.

Code Language Models have been trained to generate accurate solutions, typically with no regard for runtime. On the other hand, previous works that explored execution optimisation have observed corresponding drops in functional correctness. To that end, we introduce Code-Optimise, a framework that incorporates both correctness (passed, failed) and runtime (quick, slow) as learning signals via self-generated preference data. Our framework is both lightweight and robust as it dynamically selects solutions to reduce overfitting while avoiding a reliance on larger models for learning signals. Code-Optimise achieves significant improvements in pass@k while decreasing the competitive baseline runtimes by an additional 6% for in-domain data and up to 3% for out-of-domain data. As a byproduct, the average length of the generated solutions is reduced by up to 48% on MBPP and 23% on HumanEval, resulting in faster and cheaper inference. The generated data and codebase will be open-sourced at www.open-source.link.

Autonomous improvement loops are hard to trust because the improvement process is usually external scaffolding bolted onto the agent: failures go unlogged, diagnoses cannot be replayed, and promote-or-discard decisions land in a side database rather than the agent's own history. We show that an event-sourced agent runtime removes that friction and turns controlled improvement into a first-class workflow. When the agent's state is a deterministic projection of an append-only event log, failures are recorded, a run replays exactly from its log, candidate patches scope to typed pipeline seams, gates are auditable, and every promotion or discard is itself an event. We demonstrate this with Regimes, a loop on the ActiveGraph runtime that diagnoses failed evaluations, proposes a repair at a pipeline point, and promotes it only after static checks, sandbox execution, in-sample evaluation, and held-out validation. The loop is target-agnostic: the same control flow runs against different tasks through a common interface. On LongMemEval-S the dominant failure is not retrieval but reconciliation: the evidence is already in the assembled context, yet the reader answers incorrectly. Across five seeded held-out splits, Regimes discovers reader-prompt repairs that improve final held-out accuracy by +0.05 to +0.10 in four splits and +0.01 in one over-promotion split; two splits are individually significant (seed 5 unadjusted for its sequential promotion structure), and the pooled count is descriptive only, since the splits share one 500-question pool. The durable contributions are ActiveGraph as an auditable substrate that makes controlled improvement loops tractable, the held-out-gated loop it supports, the failure-regime taxonomy routing each failure to a pipeline location (whose marginal value over an unrouted baseline is the primary open question), and the prompt-as-discovery-probe hypothesis.

Large Language Models (LLMs) have significantly advanced the automation of software engineering tasks. One prominent example is code generation, where an LLM produces code in a specified programming language based on a natural language description. Most research in this area has focused on high-resource languages, such as Python or Java, which benefit from abundant training data. A smaller body of work has explored low-resource languages, which are underrepresented in training corpora. In contrast, no-resource languages for which LLMs have seen virtually no training data remain largely unstudied. These languages often emerge in industry, where organizations develop proprietary or domain-specific languages unsupported by commercial tools like GitHub Copilot. This results in the need for companies to deploy their own in-house code recommenders. To investigate possible solutions in this context, we build and release three code generation benchmarks for no-resource languages, based on two recently proposed programming languages for which very little training data is available. Using these benchmarks, we experiment several solutions to teach LLMs about no-resource languages, including prompt-based techniques as well as pre-training and fine-tuning exploiting the little data available. While further pre-training gives the largest performance gains for no-resource languages, applying it directly to instruction-tuned models harms their ability to follow instructions. To address this, we start from a base model, further pre-training it on the target language, and then inject instruction-following capabilities via weight diff transfer from an instruction model. Such an approach significantly improves code generation capabilities in no-resource settings, allowing companies to cheaply deploy a specialized instruct model without dealing with the computational cost of instruction fine-tuning.

Despite the transformative impact of Large Language Models (LLMs) across critical domains such as healthcare, customer service, and business marketing, their integration into Open Radio Access Networks (O-RAN) remains limited. This gap is primarily due to the absence of domain-specific foundational models, with existing solutions often relying on general-purpose LLMs that fail to address the unique challenges and technical intricacies of O-RAN. To bridge this gap, we introduce ORANSight-2.0 (O-RAN Insights), a pioneering initiative to develop specialized foundational LLMs tailored for O-RAN. Built on 18 models spanning five open-source LLM frameworks -- Mistral, Qwen, Llama, Phi, and Gemma -- ORANSight-2.0 fine-tunes models ranging from 1B to 70B parameters, significantly reducing reliance on proprietary, closed-source models while enhancing performance in O-RAN-specific tasks. At the core of ORANSight-2.0 is RANSTRUCT, a novel Retrieval-Augmented Generation (RAG)-based instruction-tuning framework that employs two LLM agents -- a Mistral-based Question Generator and a Qwen-based Answer Generator -- to create high-quality instruction-tuning datasets. The generated dataset is then used to fine-tune the 18 pre-trained open-source LLMs via QLoRA. To evaluate ORANSight-2.0, we introduce srsRANBench, a novel benchmark designed for code generation and codebase understanding in the context of srsRAN, a widely used 5G O-RAN stack.

Memory is increasingly central to Large Language Model (LLM) agents operating beyond a single context window, yet most existing systems rely on offline, query-agnostic memory construction that can be inefficient and may discard query-critical information. Although runtime memory utilization is a natural alternative, prior work often incurs substantial overhead and offers limited explicit control over the performance-cost trade-off. In this work, we present BudgetMem, a runtime agent memory framework for explicit, query-aware performance-cost control. BudgetMem structures memory processing as a set of memory modules, each offered in three budget tiers (i.e., Low/Mid/High). A lightweight router performs budget-tier routing across modules to balance task performance and memory construction cost, which is implemented as a compact neural policy trained with reinforcement learning. Using BudgetMem as a unified testbed, we study three complementary strategies for realizing budget tiers: implementation (method complexity), reasoning (inference behavior), and capacity (module model size). Across LoCoMo, LongMemEval, and HotpotQA, BudgetMem surpasses strong baselines when performance is prioritized (i.e., high-budget setting), and delivers better accuracy-cost frontiers under tighter budgets. Moreover, our analysis disentangles the strengths and weaknesses of different tiering strategies, clarifying when each axis delivers the most favorable trade-offs under varying budget regimes.

Large Language Models (LLMs) have achieved remarkable success in software engineering tasks when trained with executable runtime environments, particularly in resolving GitHub issues. However, such runtime environments are often unavailable in other domains, especially cybersecurity, where challenge configurations and execution contexts are ephemeral or restricted. We present Cyber-Zero, the first runtime-free framework for synthesizing high-quality agent trajectories to train cybersecurity LLMs. Cyber-Zero leverages publicly available CTF writeups and employs persona-driven LLM simulation to reverse-engineer runtime behaviors and generate realistic, long-horizon interaction sequences without actual environments. Using trajectories synthesized by Cyber-Zero, we train LLM-based agents that achieve up to 13.1% absolute performance gains over baseline models on three prominent CTF benchmarks: InterCode-CTF, NYU CTF Bench, and Cybench. Our best model, Cyber-Zero-32B, establishes new state-of-the-art performance among open-weight models, matching the capabilities of proprietary systems like DeepSeek-V3-0324 and Claude-3.5-Sonnet while offering superior cost-effectiveness, and demonstrating that runtime-free trajectory synthesis can effectively democratize the development of state-of-the-art cybersecurity agents.

Capable open-weight models make local coding and reasoning attractive, but their context and execution state strain laptop memory. We present JustFit, an MLX-based inference runtime that combines KVExec for compressed KV execution, PhaseSwap for component residency, and StateTrans for state-preserving serving transitions. These mechanisms fuse reconstruction and coordinate just-in-time materialization and release, independently of model-weight quantization. In full-execution capacity tests on a 24 GiB M4 Pro MacBook running Qwen3.8-27B MXFP4, three independent runs complete 196,608 input and 16,384 output tokens, increasing completed single-request context from the mlx-vlm baseline's 30,720 positions to 212,992 (6.93x); a separate two-request run retains 229,376 positions in aggregate. In separate performance tests, a 32K-input, 64-output probe reaches 19.11 tokens/s, and a repeated 32K+6K workload has a median peak process footprint of 16,374 MiB. The integrated runtime answers 29 of 30 AIME 2026 problems correctly, showing how compact state and lifetime-aware execution expand local serving capacity while supporting extended generated reasoning.

Context: Just-in-Time (JIT) compilers are able to specialize the code they generate according to a continuous profiling of the running programs. This gives them an advantage when compared to Ahead-of-Time (AoT) compilers that must choose the code to generate once for all. Inquiry: Is it possible to improve the performance of AoT compilers by adding Dynamic Binary Modification (DBM) to the executions? Approach: We added to the Hopc AoT JavaScript compiler a new optimization based on DBM to the inline cache (IC), a classical optimization dynamic languages use to implement object property accesses efficiently. Knowledge: Reducing the number of memory accesses as the new optimization does, does not shorten execution times on contemporary architectures. Grounding: The DBM optimization we have implemented is fully operational on x86_64 architectures. We have conducted several experiments to evaluate its impact on performance and to study the reasons of the lack of acceleration. Importance: The (negative) result we present in this paper sheds new light on the best strategy to be used to implement dynamic languages. It tells that the old days were removing instructions or removing memory reads always yielded to speed up is over. Nowadays, implementing sophisticated compiler optimizations is only worth the effort if the processor is not able by itself to accelerate the code. This result applies to AoT compilers as well as JIT compilers.

With the advent of large language models (LLMs) like GPT-3, a natural question is the extent to which these models can be utilized for source code optimization. This paper presents methodologically stringent case studies applied to well-known open source python libraries pillow and numpy. We find that contemporary LLM ChatGPT-4 (state September and October 2023) is surprisingly adept at optimizing energy and compute efficiency. However, this is only the case in interactive use, with a human expert in the loop. Aware of experimenter bias, we document our qualitative approach in detail, and provide transcript and source code. We start by providing a detailed description of our approach in conversing with the LLM to optimize the _getextrema function in the pillow library, and a quantitative evaluation of the performance improvement. To demonstrate qualitative replicability, we report further attempts on another locus in the pillow library, and one code locus in the numpy library, to demonstrate generalization within and beyond a library. In all attempts, the performance improvement is significant (factor up to 38). We have also not omitted reporting of failed attempts (there were none). We conclude that LLMs are a promising tool for code optimization in open source libraries, but that the human expert in the loop is essential for success. Nonetheless, we were surprised by how few iterations were required to achieve substantial performance improvements that were not obvious to the expert in the loop. We would like bring attention to the qualitative nature of this study, more robust quantitative studies would need to introduce a layer of selecting experts in a representative sample -- we invite the community to collaborate.

Inference-time techniques are emerging as highly effective tools to enhance large language model (LLM) capabilities. However, best practices for developing systems that combine these techniques remain underdeveloped due to our limited understanding of the utility of individual inference-time techniques and the interactions between them. Additionally, efficiently and automatically searching the space of model choices, inference-time techniques, and their compositions is challenging due to the large design space. To address these challenges, we introduce Archon, a modular framework for selecting, combining, and stacking layers of inference-time techniques to construct optimized LLM systems for target benchmarks. Rather than relying on a single LLM called once, we leverage a diverse set of LLMs and inference-time techniques, creating LLM systems greater than the sum of their parts. Archon defines an extensible design space, encompassing techniques such as generation ensembling, repeated sampling, ranking, fusion, critiquing, verification, and unit testing. It transforms the problem of building LLM systems into a hyperparameter optimization objective. Given the available LLMs, inference-time techniques, and compute budget, Archon utilizes hyperparameter search techniques to discover optimized architectures for target benchmark(s). We evaluate Archon architectures across a range of instruction-following, reasoning, and coding benchmarks, including MT-Bench, Arena-Hard-Auto, AlpacaEval 2.0, MixEval, MixEval Hard, MATH, and CodeContests. Archon architectures outperform frontier models, such as GPT-4o and Claude 3.5 Sonnet, on these benchmarks, achieving an average accuracy increase of 15.1 percentage points by using all available LLMs. We make our code and datasets available publicly on Github: https://github.com/ScalingIntelligence/Archon.

Deep neural networks are highly performant, but might base their decision on spurious or background features that co-occur with certain classes, which can hurt generalization. To mitigate this issue, the usage of 'model guidance' has gained popularity recently: for this, models are guided to be "right for the right reasons" by regularizing the models' explanations to highlight the right features. Experimental validation of these approaches has thus far however been limited to relatively simple and / or synthetic datasets. To gain a better understanding of which model-guiding approaches actually transfer to more challenging real-world datasets, in this work we conduct an in-depth evaluation across various loss functions, attribution methods, models, and 'guidance depths' on the PASCAL VOC 2007 and MS COCO 2014 datasets, and show that model guidance can sometimes even improve model performance. In this context, we further propose a novel energy loss, show its effectiveness in directing the model to focus on object features. We also show that these gains can be achieved even with a small fraction (e.g. 1%) of bounding box annotations, highlighting the cost effectiveness of this approach. Lastly, we show that this approach can also improve generalization under distribution shifts. Code will be made available.

Agentic systems built on large language models (LLMs) extend beyond text generation to autonomously retrieve information and invoke tools. This runtime execution model shifts the attack surface from build-time artifacts to inference-time dependencies, exposing agents to manipulation through untrusted data and probabilistic capability resolution. While prior work has focused on model-level vulnerabilities, security risks emerging from cyclic and interdependent runtime behavior remain fragmented. We systematize these risks within a unified runtime framework, categorizing threats into data supply chain attacks (transient context injection and persistent memory poisoning) and tool supply chain attacks (discovery, implementation, and invocation). We further identify the Viral Agent Loop, in which agents act as vectors for self-propagating generative worms without exploiting code-level flaws. Finally, we advocate a Zero-Trust Runtime Architecture that treats context as untrusted control flow and constrains tool execution through cryptographic provenance rather than semantic inference.

Language models of code (LMs) work well when the surrounding code in the vicinity of generation provides sufficient context. This is not true when it becomes necessary to use types or functionality defined in another module or library, especially those not seen during training. LMs suffer from limited awareness of such global context and end up hallucinating, e.g., using types defined in other files incorrectly. Recent work tries to overcome this issue by retrieving global information to augment the local context. However, this bloats the prompt or requires architecture modifications and additional training. Integrated development environments (IDEs) assist developers by bringing the global context at their fingertips using static analysis. We extend this assistance, enjoyed by developers, to the LMs. We propose a notion of monitors that use static analysis in the background to guide the decoding. Unlike a priori retrieval, static analysis is invoked iteratively during the entire decoding process, providing the most relevant suggestions on demand. We demonstrate the usefulness of our proposal by monitoring for type-consistent use of identifiers whenever an LM generates code for object dereference. To evaluate our approach, we curate PragmaticCode, a dataset of open-source projects with their development environments. On models of varying parameter scale, we show that monitor-guided decoding consistently improves the ability of an LM to not only generate identifiers that match the ground truth but also improves compilation rates and agreement with ground truth. We find that LMs with fewer parameters, when guided with our monitor, can outperform larger LMs. With monitor-guided decoding, SantaCoder-1.1B achieves better compilation rate and next-identifier match than the much larger text-davinci-003 model. The datasets and code will be released at https://aka.ms/monitors4codegen .

Structured LLM workflows, where specialized LLM sub-agents execute according to a predefined graph, have become a powerful abstraction for solving complex tasks. Optimizing such workflows, i.e., selecting configurations for each sub-agent to balance accuracy and latency, is challenging due to the combinatorial design space over model choices, reasoning budgets, and workflow structures. Existing cost-aware methods largely treat workflow optimization as a routing problem, selecting a configuration at inference time for each query according to the accuracy-latency objective used during training. We argue that structured LLM workflows can also be optimized from a compilation perspective: before deployment, the system can globally explore the workflow design space and construct a reusable set of workflow-level configurations spanning diverse accuracy-latency trade-offs. Drawing inspiration from machine learning compilers, we introduce FlowCompile, a structured LLM workflow compiler that performs compile-time design space exploration to identify a high-quality, reusable trade-off set. FlowCompile decomposes a workflow into sub-agents, profiles each sub-agent under diverse configurations, and composes these measurements through a structure-aware proxy to estimate workflow-level accuracy and latency. It then identifies diverse high-quality configurations in a single compile-time pass, without retraining or online adaptation. Experiments across diverse workflows and challenging benchmarks show that FlowCompile consistently outperforms heuristically optimized workflow configurations and routing-based baselines, delivering up to 6.4x speedup. The compiled configuration set further serves as a reusable optimization artifact, enabling flexible deployment under varying runtime preferences and supporting downstream selection or routing.

Large Language Models (LLMs) generate functionally correct solutions but often fall short in code efficiency, a critical bottleneck for real-world deployment. In this paper, we introduce a novel test-time iterative optimization framework to address this, employing a closed-loop system where LLMs iteratively refine code based on empirical performance feedback from an execution sandbox. We explore three training strategies: Supervised Fine-Tuning (SFT), Direct Preference Optimization (DPO), and Group Relative Policy Optimization~(GRPO). Experiments on our Venus dataset and the APPS benchmark show that SFT and DPO rapidly saturate in efficiency gains. In contrast, GRPO, using reinforcement learning (RL) with execution feedback, continuously optimizes code performance, significantly boosting both pass@1 (from 47% to 62%) and the likelihood of outperforming human submissions in efficiency (from 31% to 45%). Our work demonstrates effective test-time code efficiency improvement and critically reveals the power of RL in teaching LLMs to truly self-improve code efficiency.

Large language models (LLMs) have achieved impressive performance on code generation. Although prior studies enhanced LLMs with prompting techniques and code refinement, they still struggle with complex programming problems due to rigid solution plans. In this paper, we draw on pair programming practices to propose PairCoder, a novel LLM-based framework for code generation. PairCoder incorporates two collaborative LLM agents, namely a Navigator agent for high-level planning and a Driver agent for specific implementation. The Navigator is responsible for proposing promising solution plans, selecting the current optimal plan, and directing the next iteration round based on execution feedback. The Driver follows the guidance of Navigator to undertake initial code generation, code testing, and refinement. This interleaved and iterative workflow involves multi-plan exploration and feedback-based refinement, which mimics the collaboration of pair programmers. We evaluate PairCoder with both open-source and closed-source LLMs on various code generation benchmarks. Extensive experimental results demonstrate the superior accuracy of PairCoder, achieving relative pass@1 improvements of 12.00%-162.43% compared to prompting LLMs directly.

Before developers can use a software project, they must first get it to run. This often requires installing the right language runtime, system packages, build tools, and test commands. Recent LLM-based agents automate environment setup by inspecting a repository, writing setup scripts, running them, and repairing the resulting errors. However, these agents still follow a sequential trial-and-error loop: they try one setup route, wait for slow commands to finish, observe the failure, and only then decide what to try next. Because environment commands often take long to run, this sequential workflow makes setup slow and limits exploration to one route at a time. We present SpecBuild, an LLM-based environment setup system designed to be both faster and more successful through speculative forking. SpecBuild explores candidate setup branches in parallel, returns the first committed environment, and discards the rest. It applies this design at two granularities: strategy-level forking explores alternative setup routes, such as different base images and dependency policies, while command-level forking predicts failures of running commands and prepares repair branches before those failures are observed. We evaluate SpecBuild on Multi-Docker-Eval, covering 334 tasks from 40 repositories and 9 programming languages. Across three backbone models, SpecBuild improves the success rate by 6.4 to 12.0 percentage points over the strongest baseline, while reducing average setup time by 22.4% to 41.6%. These results show that LLM-based environment setup need not trade speed for reliability: parallel speculative exploration can make agents both faster and more successful.

Guidance in conditional diffusion generation is of great importance for sample quality and controllability. However, existing guidance schemes are to be desired. On one hand, mainstream methods such as classifier guidance and classifier-free guidance both require extra training with labeled data, which is time-consuming and unable to adapt to new conditions. On the other hand, training-free methods such as universal guidance, though more flexible, have yet to demonstrate comparable performance. In this work, through a comprehensive investigation into the design space, we show that it is possible to achieve significant performance improvements over existing guidance schemes by leveraging off-the-shelf classifiers in a training-free fashion, enjoying the best of both worlds. Employing calibration as a general guideline, we propose several pre-conditioning techniques to better exploit pretrained off-the-shelf classifiers for guiding diffusion generation. Extensive experiments on ImageNet validate our proposed method, showing that state-of-the-art diffusion models (DDPM, EDM, DiT) can be further improved (up to 20%) using off-the-shelf classifiers with barely any extra computational cost. With the proliferation of publicly available pretrained classifiers, our proposed approach has great potential and can be readily scaled up to text-to-image generation tasks. The code is available at https://github.com/AlexMaOLS/EluCD/tree/main.

In recent years, researchers have proposed numerous benchmarks to evaluate the impressive coding capabilities of large language models (LLMs). However, existing benchmarks primarily focus on assessing the correctness of code generated by LLMs, while neglecting other critical dimensions that also significantly impact code quality. Therefore, this paper proposes the RACE benchmark, which comprehensively evaluates the quality of code generated by LLMs across 4 dimensions: Readability, mAintainability, Correctness, and Efficiency. Specifically, considering the demand-dependent nature of dimensions beyond correctness, we design various types of user requirements for each dimension to assess the model's ability to generate correct code that also meets user demands. We evaluate 18 representative LLMs on RACE and find that: 1) the current LLMs' ability to generate high-quality code on demand does not yet meet the requirements of software development; 2) readability serves as a critical indicator of the overall quality of generated code; 3) most LLMs exhibit an inherent preference for specific coding style. These findings can help researchers gain a deeper understanding of the coding capabilities of current LLMs and shed light on future directions for model improvement.

Reinforcement Learning with Verifiable Rewards (RLVR) has markedly enhanced the reasoning abilities of large language models (LLMs). Its success, however, largely depends on strong base models with rich world knowledge, yielding only modest improvements for small-size language models (SLMs). To address this limitation, we investigate Guided GRPO, which injects ground-truth reasoning steps into roll-out trajectories to compensate for SLMs' inherent weaknesses. Through a comprehensive study of various guidance configurations, we find that naively adding guidance delivers limited gains. These insights motivate G^2RPO-A, an adaptive algorithm that automatically adjusts guidance strength in response to the model's evolving training dynamics. Experiments on mathematical reasoning and code-generation benchmarks confirm that G^2RPO-A substantially outperforms vanilla GRPO. Our code and models are available at https://github.com/T-Lab-CUHKSZ/G2RPO-A.

Training modern neural networks is increasingly fragile, with rare but severe destabilizing updates often causing irreversible divergence or silent performance degradation. Existing optimization methods primarily rely on preventive mechanisms embedded within the optimizer, offering limited ability to detect and recover from instability once it occurs. We introduce a supervisory runtime stability framework that treats optimization as a controlled stochastic process. By isolating an innovation signal derived from secondary measurements, such as validation probes, the framework enables automatic detection and recovery from destabilizing updates without modifying the underlying optimizer. We provide theoretical runtime safety guarantees that formalize bounded degradation and recovery. Our implementation incurs minimal overhead and is compatible with memory-constrained training settings.

A multi-agent pipeline with N agents typically issues N LLM calls per run. Merging agents into fewer calls (compound execution) promises token savings, but naively merged calls silently degrade quality through tool loss and prompt compression. We present Agent Capsules, an adaptive execution runtime that treats multi-agent pipeline execution as an optimization problem with empirical quality constraints. The runtime instruments coordination overhead per group, scores composition opportunity, selects among three compound execution strategies, and gates every mode switch on rolling-mean output quality. A controlled negative result confirms that injecting more context into a merged call worsens compression rather than relieving it, so the framework's escalation ladder (standard, then two-phase, then sequential) recovers quality by moving toward per-agent dispatch rather than by rewriting merged prompts. On LLM-judged quality, the controller matches a hand-tuned oracle on every measured (model, group, mode) cell: routing compound whenever the oracle would, and reverting to fine whenever quality would fail the floor, without per-model configuration. Against a hand-crafted LangGraph implementation of a 14-agent competitive intelligence pipeline, Agent Capsules uses 51% fewer fine-mode input tokens and 42% fewer compound-mode input tokens, at +0.020 and +0.017 quality respectively. Against a DSPy implementation of a 5-agent due diligence pipeline, the framework uses 19% fewer tokens than uncompiled DSPy at quality parity, and 68% fewer tokens than MIPROv2 at +0.052 quality. Even before compound mode fires, the runtime delivers efficiency through automatic policy resolution, cache-aligned prompts, and topology-aware context injection, matching both hand-tuned and compile-time baselines without training data or per-pipeline engineering.

Prompt engineering is critical for the development of LLM-based applications. However, it is usually done manually in a "trial and error" fashion. This manual procedure can be time consuming, ineffective, and the generated prompts are, in a lot of cases, sub-optimal. Even for the prompts which seemingly work well, there is always a lingering question: can the prompts be made better with further modifications? To address these questions, in this paper, we investigate prompt engineering automation. We consider a specific use case scenario in which developers/users have drafted initial prompts, but lack the time/expertise to optimize them. We propose PRewrite, an automated tool to rewrite these drafts and to generate highly effective new prompts. PRewrite is based on the Reinforcement Learning (RL) framework which allows for end-to-end optimization and our design allows the RL search to happen in a large action space. The automated tool leverages manually crafted prompts as starting points which makes the rewriting procedure more guided and efficient. The generated prompts are human readable, and self-explanatory, unlike some of those in previous works. We conducted extensive experiments on diverse datasets and found that the prompts generated with this new method not only outperform professionally crafted prompts, but also prompts generated with other previously proposed methods.

Code efficiency is a fundamental aspect of software quality, yet how to harness large language models (LLMs) to optimize programs remains challenging. Prior approaches have sought for one-shot rewriting, retrieved exemplars, or prompt-based search, but they do not explicitly distill reusable optimization knowledge, which limits generalization beyond individual instances. In this paper, we present EffiSkill, a framework for code-efficiency optimization that builds a portable optimization toolbox for LLM-based agents. The key idea is to model recurring slow-to-fast transformations as reusable agent skills that capture both concrete transformation mechanisms and higher-level optimization strategies. EffiSkill adopts a two-stage design: Stage I mines Operator and Meta Skills from large-scale slow/fast program pairs to build a skill library; Stage II applies this library to unseen programs through execution-free diagnosis, skill retrieval, plan composition, and candidate generation, without runtime feedback. Results on EffiBench-X show that EffiSkill achieves higher optimization success rates, improving over the strongest baseline by 3.69 to 12.52 percentage points across model and language settings. These findings suggest that mechanism-level skill reuse provides a useful foundation for execution-free code optimization, and that the resulting skill library can serve as a reusable resource for broader agent workflows.

LLM agents increasingly adopt skills as a reusable unit of composition. While skills are shared across diverse agent platforms, current systems treat them as raw context, causing the same skill to behave inconsistently for different agents. This fragility undermines skill portability and execution efficiency. To address this challenge, we analyze 118,000 skills and draw inspiration from traditional compiler design. We treat skills as code and LLMs as heterogeneous processors. To make portability actionable, we decompose a skill's requirements into a set of primitive capabilities, and measure how well each model-harness pair supports them. Based on these capability profiles, we propose SkVM, a compilation and runtime system designed for portable and efficient skill execution. At compile time, SkVM performs capability-based compilation, environment binding, and concurrency extraction. At runtime, SkVM applies JIT code solidification and adaptive recompilation for performance optimization. We evaluate SkVM across eight LLMs of varying scales and three agent harnesses, covering SkillsBench and representative skill tasks. Results demonstrate that SkVM significantly improves task completion rates across different models and environments while reducing token consumption by up to 40%. In terms of performance, SkVM achieves up to 3.2x speedup with enhanced parallelism, and 19-50x latency reduction through code solidification.

Foundation models have transformed automated code generation, yet autonomous software-engineering agents remain unreliable in realistic development settings. The dominant explanation locates this gap in model capability. We propose a different locus: software-engineering capability emerges from a model-harness-environment system, in which a runtime substrate -- the harness -- mediates how a foundation-model agent observes a project, acts on it, receives feedback, and establishes that a change is complete. We formalize this substrate as an AI Harness Engineering and identify eleven component responsibilities: task specification, context selection, tool access, project memory, task state, observability, failure attribution, verification, permissions, entropy auditing, and intervention recording. We operationalize the harness through a four-level ladder (H0-H3) that progressively exposes runtime support to the agent, and we propose a trace-based evaluation protocol that converts each agent run into an auditable episode package. Applied to a controlled validation task, the framework yields episode packages whose evidence structure varies systematically with harness level: lower levels produce only a final patch, higher levels produce reproduction logs, failure attributions, deterministic requirement checks, and structured verification reports. The framework reframes the central question of autonomous software engineering from whether a foundation model can produce a patch to whether the model-harness-environment system can produce a verifiably correct, attributed, and maintainable change. We outline a research program for the runtime systems that foundation-model software agents will require.

In this paper we present a comparative study of path feasibility queries generated during path exploration based software engineering methods. Symbolic execution based methods are gaining importance in different aspects of software engineering e.g. proving properties about programs, test case generation, comparing different executions of programs. These methods use SMT solvers to check the satisfiability of path feasibility queries written as a formula in the supported theories. We study the performance of solving such path feasibility queries using SMT solvers for real world programs. Our path condition formulas are generated in a theory of quantifier free bit vectors with arrays (QF_ABV). We show that among the different SMT solvers, STP is better than Z3 by an order of magnitude for such kind of queries. As an application we design a new program analysis (Change Value Analysis) based on our study which exploits undefined behaviors in programs. We have implemented our analysis in LLVM and tested it with the benchmark of SIR programs. It reduces the time taken for solving path feasibility queries by 48%. The study can serve as guidance to practitioners using path feasibility queries to create scalable software engineering methods based on symbolic execution.

Recently, the rapid development of large language models (LLMs) has reshaped software engineering by enabling autonomous code agents that plan, execute, and utilize external tools iteratively to tackle complex tasks. Beyond achieving functional correctness, these agents must faithfully follow process instructions and constraints throughout the development lifecycle. However, existing benchmarks typically focus on final functional correctness or confine instruction-following evaluation to single-turn, general chat or simple code generation scenarios, leaving instruction-following in multi-turn agentic coding underexplored. To bridge this gap, we propose MTAC-IFBench, a comprehensive benchmark for this critical capability. It features multi-turn progressive software development instructions with diverse constraints spanning 6 primary and 18 secondary categories. With an average of 7.04 turns and 91.33 constraints per instance, it poses a rigorous challenge to current LLMs. To make the evaluation reliable, we construct a checklist for each constraint and functional requirement, and integrate verification scripts and judge agents to verify each checklist item. MTAC-IFBench identifies significant deficiencies in existing code agents in multi-turn instruction-following, with their performance degrading rapidly as the interaction session grows longer.

Large language models (LLMs) are increasingly applied in task-oriented dialogue (TOD) systems but often struggle with long, conditional workflows that involve external tool calls and depend on user-specific information. We present Workflow Adherence via Runtime Parallel Personalization, or WARPP, a training-free, modular framework that combines multi-agent orchestration with runtime personalization to improve workflow adherence in LLM-based systems. By dynamically pruning conditional branches based on user attributes, the framework reduces reasoning overhead and narrows tool selection at runtime. WARPP deploys a parallelized architecture where a dedicated Personalizer agent operates alongside modular, domain-specific agents to dynamically tailor execution paths in real time. The framework is evaluated across five representative user intents of varying complexity within three domains: banking, flights, and healthcare. Our evaluation leverages synthetic datasets and LLM-powered simulated users to test scenarios with conditional dependencies. Our results demonstrate that WARPP outperforms both the non-personalized method and the ReAct baseline, achieving increasingly larger gains in parameter fidelity and tool accuracy as intent complexity grows, while also reducing average token usage, without any additional training.

We present BaseRT, a native Metal inference runtime for large language models (LLMs) on Apple Silicon, and report the highest inference throughput on this hardware to date. Existing runtimes, including llama.cpp and MLX-based frameworks, incur overhead from abstractions not designed for Metal's execution model or Apple Silicon's unified memory topology. By building natively on Metal with chip-specific kernel fusion, unified memory-aware optimisation, and custom dispatch logic, BaseRT recovers performance that framework-based approaches leave on the table. BaseRT supports a wide range of model families across eight quantisation formats (Q2 to FP16) on all Apple M-series devices. In this paper, we evaluate the Qwen3, Llama 3.2, and Gemma 4 families at Q4 and Q8 quantisation on M3 and M4 Pro devices. BaseRT achieves up to 1.56x higher decode throughput than llama.cpp and up to 1.35x higher than MLX, with substantially larger margins on prefill for mixture-of-experts models, delivering consistent best-in-class throughput from sub-1B to 30B parameter models. These results establish Apple Silicon as a more capable inference platform than previously reported, with direct implications for the emerging edge inference paradigm: as privacy requirements, latency constraints, and cloud cost pressures drive inference toward on-device deployment, performance-optimised local runtimes are a critical enabling layer for this transition. BaseRT is publicly available at https://github.com/basecompute/baseRT

Memory safety violations in low-level code, written in languages like C, continues to remain one of the major sources of software vulnerabilities. One method of removing such violations by construction is to port C code to a safe C dialect. Such dialects rely on programmer-supplied annotations to guarantee safety with minimal runtime overhead. This porting, however, is a manual process that imposes significant burden on the programmer and, hence, there has been limited adoption of this technique. The task of porting not only requires inferring annotations, but may also need refactoring/rewriting of the code to make it amenable to such annotations. In this paper, we use Large Language Models (LLMs) towards addressing both these concerns. We show how to harness LLM capabilities to do complex code reasoning as well as rewriting of large codebases. We also present a novel framework for whole-program transformations that leverages lightweight static analysis to break the transformation into smaller steps that can be carried out effectively by an LLM. We implement our ideas in a tool called MSA that targets the CheckedC dialect. We evaluate MSA on several micro-benchmarks, as well as real-world code ranging up to 20K lines of code. We showcase superior performance compared to a vanilla LLM baseline, as well as demonstrate improvement over a state-of-the-art symbolic (non-LLM) technique.

Predicting program behavior without execution is an essential and challenging task in software engineering. Traditional models often struggle to capture dynamic dependencies and interactions within code. This paper introduces a novel machine learning-based framework called CodeFlowrepresents, which predicts code coverage and detects runtime errors through Dynamic Dependencies Learning. Utilizing control flow graphs (CFGs), CodeFlowrepresents all possible execution paths and the relationships between different statements, offering a comprehensive understanding of program behavior. It constructs CFGs to depict execution paths and learns vector representations for CFG nodes, capturing static control-flow dependencies. Additionally, it learns dynamic dependencies through execution traces, which reflect the impacts among statements during execution. This approach enables accurate prediction of code coverage and identification of runtime errors. Empirical evaluations show significant improvements in code coverage prediction accuracy and effective localization of runtime errors, surpassing current models.

Large Language Models (LLMs) have achieved remarkable success in automated code translation. While prior work has focused on improving translation accuracy through advanced prompting and iterative repair, the reliability of the underlying evaluation frameworks has received less attention. In this paper, we demonstrate that a significant number of reported failures in code translation are not due to incorrect logic, but rather evaluation-induced errors stemming from improper compilation flags, missing library links, and unconfigured runtime environments. We conduct a large-scale empirical study across five programming languages (C, C++, Java, Python, Go) and three benchmarks (Avatar, CodeNet, EvalPlus), covering 6,164 translations generated by GPT-4o, DeepSeek-Coder, and Magicoder. Our analysis identifies and categorizes common false negatives, distinguishing pipeline-induced failures that affect any model from model-dependent behaviors that vary across LLMs. Our findings highlight the necessity for transparent, configuration-aware evaluation standards to accurately assess progress in LLM-based code translation.

Large language models (LLMs) have achieved remarkable progress in automatic code generation, yet their ability to produce high-performance code remains limited--a critical requirement in real-world software systems. We argue that current LLMs struggle not only due to data scarcity but, more importantly, because they lack supervision that guides interpretable and effective performance improvements. In this work, we introduce PerfCoder, a family of LLMs specifically designed to generate performance-enhanced code from source code via interpretable, customized optimizations. PerfCoder is fine-tuned on a curated collection of real-world optimization trajectories with human-readable annotations, and preference-aligned by reinforcement fine-tuning using runtime measurements, enabling it to propose input-specific improvement strategies and apply them directly without relying on iterative refinement. On the PIE code performance benchmark, PerfCoder surpasses all existing models in both runtime speedup and effective optimization rate, demonstrating that performance optimization cannot be achieved by scale alone but requires optimization stratetgy awareness. In addition, PerfCoder can generate interpretable feedback about the source code, which, when provided as input to a larger LLM in a planner-and-optimizer cooperative workflow, can further improve outcomes. Specifically, we elevate the performance of 32B models and GPT-5 to new levels on code optimization, substantially surpassing their original performance.

Recent advances in agentic systems increasingly treat code as an executable operational substrate rather than as a disposable output artifact. Prior work such as Code as Agent Harness frames validated agent-generated artifacts as runtime entities that can be created, executed, revised, persisted, and reused within long-running cognitive loops. However, the governance, lifecycle management, and operational evolution of such artifacts remain under-specified. This paper proposes a framework for governed runtime evolution in multi-agent systems through executable operational cognition. We formalize agent-generated artifacts as persistent runtime capabilities that progressively become part of the operational substrate rather than transient intermediate outputs. Building on this perspective, we introduce HarnessMutation as a governed mechanism for lifecycle-aware runtime adaptation operating under explicit validation, traceability, evaluation, and rollback constraints. Rather than treating runtime adaptation as unrestricted self-modification, the proposed framework models evolution as a bounded and observable process over persistent operational memory. It further shows how these ideas can be operationalized over modern agent runtimes and governance-oriented orchestration systems, providing a conceptual foundation for adaptive infrastructures whose evolution remains explicit, auditable, and constrained.

As the production of software passes into the hands of software itself, coding agents are increasingly commissioned to build agents fitted to their users' own workflows. This delegation carries a quiet assumption, that the delivered agent will faithfully serve the requirement it was built for, rather than merely appear to. No existing benchmark tests that assumption. We introduce AgentSWE, a benchmark for agent software engineering spanning three stages of the agent development lifecycle: Creation of a complete agent from a natural-language requirement, Editing of production agent codebases, and Optimization toward a measurable target. Each of its 25 tasks is framed as a commission rather than an exam: the builder iterates against a handful of illustrative cases, while acceptance exercises the frozen submission on held-out cases designed to span the full requirement, grading behavior against requirement-derived rubrics under hard pass/fail gates or, for Optimization, against the source benchmark's own objective. Evaluating a range of coding agents across models and harnesses, we find that none comes close to delivering what a requirement asks for: the gap between what a builder demonstrates and what it delivers is the norm, not the corner case. An accompanying empirical analysis of the failure trajectories identifies recurring failure modes, among them overfitting to the visible cases, hollow runtimes behind code that looks complete, and unsupported claims of completion, each a signal by which coding agents can learn to build the agents they are asked for.

In the evolving landscape of large language models (LLMs) tailored for software engineering, the need for benchmarks that accurately reflect real-world development scenarios is paramount. Current benchmarks are either too simplistic or fail to capture the multi-tasking nature of software development. To address this, we introduce CoderUJB, a new benchmark designed to evaluate LLMs across diverse Java programming tasks that are executable and reflective of actual development scenarios, acknowledging Java's prevalence in real-world software production. CoderUJB comprises 2,239 programming questions derived from 17 real open-source Java projects and spans five practical programming tasks. Our empirical study on this benchmark investigates the coding abilities of various open-source and closed-source LLMs, examining the effects of continued pre-training in specific programming languages code and instruction fine-tuning on their performance. The findings indicate that while LLMs exhibit strong potential, challenges remain, particularly in non-functional code generation (e.g., test generation and defect detection). Importantly, our results advise caution in the specific programming languages continued pre-training and instruction fine-tuning, as these techniques could hinder model performance on certain tasks, suggesting the need for more nuanced strategies. CoderUJB thus marks a significant step towards more realistic evaluations of programming capabilities in LLMs, and our study provides valuable insights for the future development of these models in software engineering.

Large Language Models (LLMs) are evolving beyond their classical role of providing information within dialogue systems to actively engaging with tools and performing actions on real-world applications and services. Today, humans verify the correctness and appropriateness of the LLM-generated outputs (e.g., code, functions, or actions) before putting them into real-world execution. This poses significant challenges as code comprehension is well known to be notoriously difficult. In this paper, we study how humans can efficiently collaborate with, delegate to, and supervise autonomous LLMs in the future. We argue that in many cases, "post-facto validation" - verifying the correctness of a proposed action after seeing the output - is much easier than the aforementioned "pre-facto validation" setting. The core concept behind enabling a post-facto validation system is the integration of an intuitive undo feature, and establishing a damage confinement for the LLM-generated actions as effective strategies to mitigate the associated risks. Using this, a human can now either revert the effect of an LLM-generated output or be confident that the potential risk is bounded. We believe this is critical to unlock the potential for LLM agents to interact with applications and services with limited (post-facto) human involvement. We describe the design and implementation of our open-source runtime for executing LLM actions, Gorilla Execution Engine (GoEX), and present open research questions towards realizing the goal of LLMs and applications interacting with each other with minimal human supervision. We release GoEX at https://github.com/ShishirPatil/gorilla/.

Recently, an increasing number of AI-driven programming assistants powered by code LLMs have been integrated into various real-world software development environments, significantly boosting developer productivity. However, existing code generation benchmarks primarily focus on general-purpose scenarios, leaving the code generation performance of LLMs for specific application domains largely unknown. In this paper, we introduce a new benchmark, MultiCodeBench, to fill this gap. MultiCodeBench comprises 2,400 programming tasks, covering 12 popular software development domains and 15 programming languages. Specifically, we perform in-depth research to identify these 12 application domains. Given that each domain may involve multiple technical frameworks, and that different frameworks present distinct challenges in the coding process, we categorize the commonly used frameworks and platforms within each domain. We then sample programming problems from GitHub repositories related to these subdomains. To ensure the quality of the tasks and mitigate data leakage issues, we invite annotators to rewrite the docstrings for each task in MultiCodeBench. Additionally, we build a static analysis-based dependency parsing tool to extract the dependencies in the ground truth for each task, enabling deeper performance analysis. Through extensive experiments on MultiCodeBench with eleven representative mainstream LLMs, we reveal the code generation performance of the LLMs across different application domains, providing practical insights for developers in downstream fields when selecting LLMs. Furthermore, we analyze the reasons behind the models' failures in completing software application development tasks, offering guidance for model developers to enhance domain-specific code generation capabilities.

Enterprise guideline documents are heterogeneous and multimodal, combining narrative text, complex tables, and embedded images. Existing LLM and VLM systems face hallucinated content, table structure degradation, and lack governed workflows extending beyond extraction to validation and artifact generation. This leaves enterprises to perform this manually, consuming 2-3 days per document. To address this, we introduce GUIDE, a governed multi-agent framework built on a shared versioned rule store with schema-validated inter-agent contracts and end-to-end provenance tracking. Six specialized agents handle parsing, VLM-driven extraction, consistency checking, evaluation, human-in-the-loop (HITL) escalation, and persona-tailored artifact synthesis. Evaluated on 120 real-world enterprise guideline documents, GUIDE achieves 96% document success, extracts 3,896 rules with 71.4% auto-approved, produces 812 deployment-ready artifacts, and reduces turnaround to 40-125 minutes per document.

Scaling up executable code data is significant for improving language models' software engineering capability. The intricate nature of the process makes it labor-intensive, time-consuming and expert-knowledge-dependent to build a large number of executable code repositories, limiting the scalability of existing work based on running tests. The primary bottleneck lies in the automated building of test environments for different repositories, which is an essential yet underexplored task. To mitigate the gap, we introduce Repo2Run, the first LLM-based agent aiming at automating the building of executable test environments for any repositories at scale. Specifically, given a code repository, Repo2Run iteratively builds the Docker image, runs unit tests based on the feedback of the building, and synthesizes the Dockerfile until the entire pipeline is executed successfully. The resulting Dockerfile can then be used to create Docker container environments for running code and tests. We created a benchmark containing 420 Python repositories with unit tests for evaluation. The results illustrate that Repo2Run achieves an 86.0% success rate, outperforming SWE-agent by 77.0%. The resources of Repo2Run are available at https://github.com/bytedance/Repo2Run.

Guidance is a crucial technique for extracting the best performance out of image-generating diffusion models. Traditionally, a constant guidance weight has been applied throughout the sampling chain of an image. We show that guidance is clearly harmful toward the beginning of the chain (high noise levels), largely unnecessary toward the end (low noise levels), and only beneficial in the middle. We thus restrict it to a specific range of noise levels, improving both the inference speed and result quality. This limited guidance interval improves the record FID in ImageNet-512 significantly, from 1.81 to 1.40. We show that it is quantitatively and qualitatively beneficial across different sampler parameters, network architectures, and datasets, including the large-scale setting of Stable Diffusion XL. We thus suggest exposing the guidance interval as a hyperparameter in all diffusion models that use guidance.

Large Language Models (LLMs) have shown great success in code generation. LLMs take as the input a prompt and output the code. A key question is how to make prompts (i.e., Prompting Techniques). Existing prompting techniques are designed for natural language generation and have low accuracy in code generation. In this paper, we propose a new prompting technique named AceCoder. Our motivation is that code generation meets two unique challenges (i.e., requirement understanding and code implementation). AceCoder contains two novel mechanisms (i.e., guided code generation and example retrieval) to solve these challenges. (1) Guided code generation asks LLMs first to analyze requirements and output an intermediate preliminary (e.g., test cases). The preliminary is used to clarify requirements and tell LLMs "what to write". (2) Example retrieval selects similar programs as examples in prompts, which provide lots of relevant content (e.g., algorithms, APIs) and teach LLMs "how to write". We apply AceCoder to three LLMs (e.g., Codex) and evaluate it on three public benchmarks using the Pass@k. Results show that AceCoder can significantly improve the performance of LLMs on code generation. (1) In terms of Pass@1, AceCoder outperforms the state-of-the-art baseline by up to 56.4% in MBPP, 70.7% in MBJP, and 88.4% in MBJSP. (2) AceCoder is effective in LLMs with different sizes (i.e., 6B to 13B) and different languages (i.e., Python, Java, and JavaScript). (3) Human evaluation shows human developers prefer programs from AceCoder.

Classifier-free guidance is a key component for enhancing the performance of conditional generative models across diverse tasks. While it has previously demonstrated remarkable improvements for the sample quality, it has only been exclusively employed for diffusion models. In this paper, we integrate classifier-free guidance into Flow Matching (FM) models, an alternative simulation-free approach that trains Continuous Normalizing Flows (CNFs) based on regressing vector fields. We explore the usage of Guided Flows for a variety of downstream applications. We show that Guided Flows significantly improves the sample quality in conditional image generation and zero-shot text-to-speech synthesis, boasting state-of-the-art performance. Notably, we are the first to apply flow models for plan generation in the offline reinforcement learning setting, showcasing a 10x speedup in computation compared to diffusion models while maintaining comparable performance.

We introduce LLM4AD, a unified Python platform for algorithm design (AD) with large language models (LLMs). LLM4AD is a generic framework with modularized blocks for search methods, algorithm design tasks, and LLM interface. The platform integrates numerous key methods and supports a wide range of algorithm design tasks across various domains including optimization, machine learning, and scientific discovery. We have also designed a unified evaluation sandbox to ensure a secure and robust assessment of algorithms. Additionally, we have compiled a comprehensive suite of support resources, including tutorials, examples, a user manual, online resources, and a dedicated graphical user interface (GUI) to enhance the usage of LLM4AD. We believe this platform will serve as a valuable tool for fostering future development in the merging research direction of LLM-assisted algorithm design.

Large Language Models (LLMs) have demonstrated impressive capabilities in code generation. However, current evaluation datasets suffer from issues such as the lack of runnable test cases, deviation from the distribution of real-world code, and the ability to evaluate only the Python language. These limitations undermine the credibility of the evaluation results. To address these limitations, we introduce MRG-Bench (Multi-language Repository-level Code Generation Benchmark), a novel dataset that provides a more accurate evaluation of LLMs in practical repository-level code generation tasks. MRG-Bench has three main features: (1) practical data sourced from real-world code repositories that align to the practical distribution, (2) multiple programming languages support, including Python, Java, and Go, and (3) project-level runnable test cases to assess the quality of the generated code. Based on MRG-Bench, we conducted extensive experiments including large language models, long-context models, and RAG-related methods. These evaluation results demonstrate that current repository-level code generation techniques suffer from significant performance deficiencies. To further investigate why models fail, we designed novel experiments to annotate the underlying causes of generation errors. The results explicitly show that the majority of methods suffer from "difficulty in understanding user requirements," failing to comprehend their assigned tasks accurately. Moreover, the impact of different repository-level contexts on this issue exhibits significant disparities across different programming languages, suggesting that, in practice, specialized contextual information needs to be designed for different languages.

Restart strategies are an important factor in the performance of conflict-driven Davis Putnam style SAT solvers. Selecting a good restart strategy for a problem instance can enhance the performance of a solver. Inspired by recent success applying machine learning techniques to predict the runtime of SAT solvers, we present a method which uses machine learning to boost solver performance through a smart selection of the restart strategy. Based on easy to compute features, we train both a satisfiability classifier and runtime models. We use these models to choose between restart strategies. We present experimental results comparing this technique with the most commonly used restart strategies. Our results demonstrate that machine learning is effective in improving solver performance.

AI agents are poised to become a primary interface to digital products, acting across email, files, payments, and personal data. People without professional software backgrounds need understandable, reusable ways to control actions across services. We examine a mechanism in which a language model maps actions to plain-language consequence categories with user-authored "allow", "ask", or "never" rules. We ask what is gained and lost when decisions are made in advance as reusable rules rather than separately for each action. We analyzed 113 participants without professional software backgrounds across three conditions: per-action human-in-the-loop approval (HITL), automated per-action model review (AUTO), or user-authored consequence policy (POLICY). Participants judged 2 examples in each of 4 consequence categories; POLICY participants then set one rule per category. All supervised an 18-action simulated day, including 7 overreach actions. POLICY blocked less overreach than HITL (-20.1 percentage points, 95% CI [-32.1, -8.1]) and AUTO (-14.5 points, 95% CI [-25.8, -3.2]). POLICY lowered runtime prompts from 18.0 to 10.9, but total intervention time was not reliably lower when rule setup was included. Exploratory analysis showed that participants chose "ask" for 114 of 140 POLICY rules, returning most overreach actions to runtime. Of the 148 overreach actions executed in POLICY, 133 followed human approval and 15 ran automatically under "allow" rules. Across all 7 overreach actions, POLICY had the highest approval rate. Counterintuitively, user-authored rules did not by themselves provide stronger protection: many actions outside users' original requests went through after users approved them. These results reveal a gap between preference and commitment: repeatedly choosing "ask" preserves case-by-case choice but prevents a standing policy from settling decisions in advance.

Large language models (LLMs) have shown remarkable progress in code generation, but their generated code often suffers from inefficiency, resulting in longer execution times and higher memory consumption. To address this issue, we propose EffiLearner, a self-optimization framework that utilizes execution overhead profiles to improve the efficiency of LLM-generated code. EffiLearner first generates code using an LLM, then executes it locally to capture execution time and memory usage profiles. These profiles are fed back to the LLM, which then revises the code to reduce overhead. To evaluate the effectiveness of EffiLearner, we conduct extensive experiments on the EffiBench, HumanEval, and MBPP with 16 open-source and 6 closed-source models. Our evaluation results demonstrate that through iterative self-optimization, EffiLearner significantly enhances the efficiency of LLM-generated code. For example, the execution time (ET) of StarCoder2-15B for the EffiBench decreases from 0.93 (s) to 0.12 (s) which reduces 87.1% the execution time requirement compared with the initial code. The total memory usage (TMU) of StarCoder2-15B also decreases from 22.02 (Mb*s) to 2.03 (Mb*s), which decreases 90.8% of total memory consumption during the execution process. The source code of EffiLearner was released in https://github.com/huangd1999/EffiLearner

CodeLLMs have demonstrated remarkable advancements in software engineering tasks. However, while these models can generate functionally correct code, they often produce code that is inefficient in terms of runtime. This inefficiency is particularly problematic in resource-constrained environments, impacting software performance and sustainability. Existing approaches for optimizing code efficiency for CodeLLMs like SOAP and PIE exhibit certain limitations. SOAP requires a compatible execution environment and predefined test cases for iterative code modification, while PIE focuses on instruction tuning, improving efficiency but compromising correctness. These shortcomings highlight the need for a fine-tuning framework that optimizes both efficiency and correctness without relying on predefined test cases or specific execution environments. To bridge this gap, we introduce ACECode, a reinforcement learning-based fine-tuning framework that aligns CodeLLMs with dual objectives of efficiency and correctness. ACECode combines three key steps: (1) generating code with an actor CodeLLM, (2) calculating a training-free reward signal derived from code execution feedback for each generated code, and (3) optimizing the CodeLLM via Proximal Policy Optimization (PPO) algorithm. This reward signal enables joint assessment of efficiency and correctness without manual labeling. We evaluate ACECode by fine-tuning four SOTA (state-of-the-art) CodeLLMs and comparing their code with three baselines: original, instruction-tuned, and PIE-tuned CodeLLMs. Extensive experiment results suggest that significantly improves the efficiency and correctness of generated code against all baselines for all CodeLLMs. Specifically, CodeLLMs fine-tuned with ACECode improve pass@1 by 1.84% to 14.51% and reduce runtime in 65% to 72% of cases compared to original CodeLLMs.

We introduce a novel paradigm in compiler optimization powered by Large Language Models with compiler feedback to optimize the code size of LLVM assembly. The model takes unoptimized LLVM IR as input and produces optimized IR, the best optimization passes, and instruction counts of both unoptimized and optimized IRs. Then we compile the input with generated optimization passes and evaluate if the predicted instruction count is correct, generated IR is compilable, and corresponds to compiled code. We provide this feedback back to LLM and give it another chance to optimize code. This approach adds an extra 0.53% improvement over -Oz to the original model. Even though, adding more information with feedback seems intuitive, simple sampling techniques achieve much higher performance given 10 or more samples.

Recent advances in large language models (LLMs) have led to the development of various evaluation benchmarks. These benchmarks typically rely on a single instruction template for evaluating all LLMs on a specific task. In this paper, we comprehensively analyze the brittleness of results obtained via single-prompt evaluations across 6.5M instances, involving 20 different LLMs and 39 tasks from 3 benchmarks. To improve robustness of the analysis, we propose to evaluate LLMs with a set of diverse prompts instead. We discuss tailored evaluation metrics for specific use cases (e.g., LLM developers vs. developers interested in a specific downstream task), ensuring a more reliable and meaningful assessment of LLM capabilities. We then implement these criteria and conduct evaluations of multiple models, providing insights into the true strengths and limitations of current LLMs.

Large language models (LLMs) have demonstrated an impressive ability to generate code for various programming tasks. In many instances, LLMs can generate a correct program for a task when given numerous trials. Consequently, a recent trend is to do large scale sampling of programs using a model and then filtering/ranking the programs based on the program execution on a small number of known unit tests to select one candidate solution. However, these approaches assume that the unit tests are given and assume the ability to safely execute the generated programs (which can do arbitrary dangerous operations such as file manipulations). Both of the above assumptions are impractical in real-world software development. In this paper, we propose CodeRanker, a neural ranker that can predict the correctness of a sampled program without executing it. Our CodeRanker is fault-aware i.e., it is trained to predict different kinds of execution information such as predicting the exact compile/runtime error type (e.g., an IndexError or a TypeError). We show that CodeRanker can significantly increase the pass@1 accuracy of various code generation models (including Codex, GPT-Neo, GPT-J) on APPS, HumanEval and MBPP datasets.

Large language models for code (i.e., code LLMs) have shown strong code understanding and generation capabilities. To evaluate the capabilities of code LLMs in various aspects, many benchmarks have been proposed (e.g., HumanEval and ClassEval). Code reasoning is one of the most essential abilities of code LLMs, but existing benchmarks for code reasoning are not sufficient. Typically, they focus on predicting the input and output of a program, ignoring the evaluation of the intermediate behavior during program execution, as well as the logical consistency (e.g., the model should not give the correct output if the prediction of execution path is wrong) when performing the reasoning. To address these problems, in this paper, we propose a framework, namely REval, for evaluating code reasoning abilities and consistency of code LLMs with program execution. We utilize existing code benchmarks and adapt them to new benchmarks within our framework. A large-scale empirical study is conducted and most LLMs show unsatisfactory performance on both Runtime Behavior Reasoning (i.e., an average accuracy of 44.4%) and Incremental Consistency Evaluation (i.e., an average IC score of 10.3). Evaluation results of current code LLMs reflect the urgent need for the community to strengthen the code reasoning capability of code LLMs. Our code, data, and \newname leaderboard are available at https://r-eval.github.io.

COBOL remains a critical language for mainframe systems, yet existing large language models (LLMs) struggle to generate and translate COBOL code correctly. This paper reports our experience in developing and evaluating domain-adapted LLMs for COBOL and mainframe software engineering. We introduce (1) an automated data curation pipeline that combines compiler-guided validation with multi-stage similarity-based filtering to construct high-quality COBOL training data, and (2) COBOL-Coder, a COBOL-specialized LLM fine-tuned on the curated COBOL domain data. We evaluate COBOL-Coder on two tasks: code generation (on COBOLEval and COBOLCodeBench) and code translation (on COBOL-JavaTrans, our proposed benchmark for bidirectional COBOL-Java translation). In our experiments, COBOL-Coder achieves up to a 73.95 percent compilation success rate and 49.33 Pass-1 on COBOLEval, compared to 41.8 percent and 16.4 for GPT-4o, while most open-source baselines (e.g., CodeGemma, CodeLlama, StarCoder2) fail to produce compilable programs. For Java-to-COBOL translation, COBOL-Coder reaches 34.93 Pass-1, whereas general-purpose LLMs achieve near-zero scores. To assess the usability of LLM-generated code in real-world settings, we conduct a survey with experienced COBOL developers. Participants consistently report that COBOL-Coder exhibits stronger COBOL awareness, has more reliable program structure, and is better aligned with enterprise practices than general-purpose LLMs.

Tool-using language-model agents often execute actions that their domain policies forbid. We present LeanGuard, a runtime that checks every proposed tool call against a policy written in Lean4 before the call reaches the environment. Policies combine state predicates with scoped past-time temporal operators over the execution history, evaluation is fail-closed, and the decision procedure is proved equivalent to a LeanLTL semantics. A denied call can be corrected in two ways. With feedback, the agent receives the violated rule and a hint; with proof-guided repair, Lean metaprogramming searches for a nearby call that preserves the user's intent and proves that the policy admits it, without the model. On Tau-Bench with five Qwen models (0.8B-27B), unguarded agents execute at least 33 calls that the Lean policy forbids, while LeanGuard executes none; with feedback, task success does not change significantly. On DTap, LeanGuard reduces direct prompt-injection success from 57.9% to 5.9%, and in telecom, where benign tasks need no writes, benign success is unchanged. Feedback reduces repeated blocked calls and raises task success for four of five models over a bare denial. On replayed denials, repair proves an admissible edit for 88 of 252 denials caused by argument values, in a median of 2,ms.

We introduce SWE Atlas, a benchmark suite for coding agents spanning three professional software engineering workflows: Codebase Q&A (124 tasks), Test Writing (90 tasks), and Refactoring (70 tasks). SWE Atlas differs from prior SWE benchmarks in three key ways: it targets underrepresented but practically important task categories, uses comprehensive category-specific evaluation protocols, and adopts under-specified, agentic task formulations that better reflect real-world usage. Its evaluation framework combines programmatic checks with rubric-based assessment. This goes beyond functional correctness, evaluating software engineering quality, including test and refactor completeness, maintainability, reusable abstractions, and codebase hygiene. We evaluate a range of frontier and open-weight models on SWE Atlas and find that GPT-5.4 and Opus 4.7 achieve the strongest overall performance, while even the best open-weight models score poorly. Our analysis suggests that top models rely on extensive codebase exploration and runtime-driven reasoning. However, even top models consistently struggle with subtle edge cases, complex runtime analysis, and adherence to software engineering best practices. Overall, SWE Atlas provides a complementary evaluation suite for measuring both correctness and engineering quality in coding agents.